// © 2016 and later: Unicode, Inc. and others. // License & terms of use: http://www.unicode.org/copyright.html /* ****************************************************************************** * * Copyright (C) 2001-2014, International Business Machines * Corporation and others. All Rights Reserved. * ****************************************************************************** * file name: utrie2.h * encoding: UTF-8 * tab size: 8 (not used) * indentation:4 * * created on: 2008aug16 (starting from a copy of utrie.h) * created by: Markus W. Scherer */ #ifndef __UTRIE2_H__ #define __UTRIE2_H__ #include "unicode/utypes.h" #include "unicode/utf8.h" #include "putilimp.h" U_CDECL_BEGIN struct UTrie; /* forward declaration */ #ifndef __UTRIE_H__ typedef struct UTrie UTrie; #endif /** * \file * * This is a common implementation of a Unicode trie. * It is a kind of compressed, serializable table of 16- or 32-bit values associated with * Unicode code points (0..0x10ffff). (A map from code points to integers.) * * This is the second common version of a Unicode trie (hence the name UTrie2). * Compared with UTrie version 1: * - Still splitting BMP code points 11:5 bits for index and data table lookups. * - Still separate data for lead surrogate code _units_ vs. code _points_, * but the lead surrogate code unit values are not required any more * for data lookup for supplementary code points. * - The "folding" mechanism is removed. In UTrie version 1, this somewhat * hard-to-explain mechanism was meant to be used for optimized UTF-16 * processing, with application-specific encoding of indexing bits * in the lead surrogate data for the associated supplementary code points. * - For the last single-value code point range (ending with U+10ffff), * the starting code point ("highStart") and the value are stored. * - For supplementary code points U+10000..highStart-1 a three-table lookup * (two index tables and one data table) is used. The first index * is truncated, omitting both the BMP portion and the high range. * - There is a special small index for 2-byte UTF-8, and the initial data * entries are designed for fast 1/2-byte UTF-8 lookup. * Starting with ICU 60, C0 and C1 are not recognized as UTF-8 lead bytes any more at all, * and the associated 2-byte indexes are unused. */ /** * Trie structure. * Use only with public API macros and functions. */ struct UTrie2; typedef struct UTrie2 UTrie2; /* Public UTrie2 API functions: read-only access ---------------------------- */ /** * Selectors for the width of a UTrie2 data value. */ enum UTrie2ValueBits { /** 16 bits per UTrie2 data value. */ UTRIE2_16_VALUE_BITS, /** 32 bits per UTrie2 data value. */ UTRIE2_32_VALUE_BITS, /** Number of selectors for the width of UTrie2 data values. */ UTRIE2_COUNT_VALUE_BITS }; typedef enum UTrie2ValueBits UTrie2ValueBits; /** * Open a frozen trie from its serialized from, stored in 32-bit-aligned memory. * Inverse of utrie2_serialize(). * The memory must remain valid and unchanged as long as the trie is used. * You must utrie2_close() the trie once you are done using it. * * @param valueBits selects the data entry size; results in an * U_INVALID_FORMAT_ERROR if it does not match the serialized form * @param data a pointer to 32-bit-aligned memory containing the serialized form of a UTrie2 * @param length the number of bytes available at data; * can be more than necessary * @param pActualLength receives the actual number of bytes at data taken up by the trie data; * can be NULL * @param pErrorCode an in/out ICU UErrorCode * @return the unserialized trie * * @see utrie2_open * @see utrie2_serialize */ U_CAPI UTrie2 * U_EXPORT2 utrie2_openFromSerialized(UTrie2ValueBits valueBits, const void *data, int32_t length, int32_t *pActualLength, UErrorCode *pErrorCode); /** * Open a frozen, empty "dummy" trie. * A dummy trie is an empty trie, used when a real data trie cannot * be loaded. Equivalent to calling utrie2_open() and utrie2_freeze(), * but without internally creating and compacting/serializing the * builder data structure. * * The trie always returns the initialValue, * or the errorValue for out-of-range code points and illegal UTF-8. * * You must utrie2_close() the trie once you are done using it. * * @param valueBits selects the data entry size * @param initialValue the initial value that is set for all code points * @param errorValue the value for out-of-range code points and illegal UTF-8 * @param pErrorCode an in/out ICU UErrorCode * @return the dummy trie * * @see utrie2_openFromSerialized * @see utrie2_open */ U_CAPI UTrie2 * U_EXPORT2 utrie2_openDummy(UTrie2ValueBits valueBits, uint32_t initialValue, uint32_t errorValue, UErrorCode *pErrorCode); /** * Get a value from a code point as stored in the trie. * Easier to use than UTRIE2_GET16() and UTRIE2_GET32() but slower. * Easier to use because, unlike the macros, this function works on all UTrie2 * objects, frozen or not, holding 16-bit or 32-bit data values. * * @param trie the trie * @param c the code point * @return the value */ U_CAPI uint32_t U_EXPORT2 utrie2_get32(const UTrie2 *trie, UChar32 c); /* enumeration callback types */ /** * Callback from utrie2_enum(), extracts a uint32_t value from a * trie value. This value will be passed on to the UTrie2EnumRange function. * * @param context an opaque pointer, as passed into utrie2_enum() * @param value a value from the trie * @return the value that is to be passed on to the UTrie2EnumRange function */ typedef uint32_t U_CALLCONV UTrie2EnumValue(const void *context, uint32_t value); /** * Callback from utrie2_enum(), is called for each contiguous range * of code points with the same value as retrieved from the trie and * transformed by the UTrie2EnumValue function. * * The callback function can stop the enumeration by returning false. * * @param context an opaque pointer, as passed into utrie2_enum() * @param start the first code point in a contiguous range with value * @param end the last code point in a contiguous range with value (inclusive) * @param value the value that is set for all code points in [start..end] * @return false to stop the enumeration */ typedef UBool U_CALLCONV UTrie2EnumRange(const void *context, UChar32 start, UChar32 end, uint32_t value); /** * Enumerate efficiently all values in a trie. * Do not modify the trie during the enumeration. * * For each entry in the trie, the value to be delivered is passed through * the UTrie2EnumValue function. * The value is unchanged if that function pointer is NULL. * * For each contiguous range of code points with a given (transformed) value, * the UTrie2EnumRange function is called. * * @param trie a pointer to the trie * @param enumValue a pointer to a function that may transform the trie entry value, * or NULL if the values from the trie are to be used directly * @param enumRange a pointer to a function that is called for each contiguous range * of code points with the same (transformed) value * @param context an opaque pointer that is passed on to the callback functions */ U_CAPI void U_EXPORT2 utrie2_enum(const UTrie2 *trie, UTrie2EnumValue *enumValue, UTrie2EnumRange *enumRange, const void *context); /* Building a trie ---------------------------------------------------------- */ /** * Open an empty, writable trie. At build time, 32-bit data values are used. * utrie2_freeze() takes a valueBits parameter * which determines the data value width in the serialized and frozen forms. * You must utrie2_close() the trie once you are done using it. * * @param initialValue the initial value that is set for all code points * @param errorValue the value for out-of-range code points and illegal UTF-8 * @param pErrorCode an in/out ICU UErrorCode * @return a pointer to the allocated and initialized new trie */ U_CAPI UTrie2 * U_EXPORT2 utrie2_open(uint32_t initialValue, uint32_t errorValue, UErrorCode *pErrorCode); /** * Clone a trie. * You must utrie2_close() the clone once you are done using it. * * @param other the trie to clone * @param pErrorCode an in/out ICU UErrorCode * @return a pointer to the new trie clone */ U_CAPI UTrie2 * U_EXPORT2 utrie2_clone(const UTrie2 *other, UErrorCode *pErrorCode); /** * Clone a trie. The clone will be mutable/writable even if the other trie * is frozen. (See utrie2_freeze().) * You must utrie2_close() the clone once you are done using it. * * @param other the trie to clone * @param pErrorCode an in/out ICU UErrorCode * @return a pointer to the new trie clone */ U_CAPI UTrie2 * U_EXPORT2 utrie2_cloneAsThawed(const UTrie2 *other, UErrorCode *pErrorCode); /** * Close a trie and release associated memory. * * @param trie the trie */ U_CAPI void U_EXPORT2 utrie2_close(UTrie2 *trie); /** * Set a value for a code point. * * @param trie the unfrozen trie * @param c the code point * @param value the value * @param pErrorCode an in/out ICU UErrorCode; among other possible error codes: * - U_NO_WRITE_PERMISSION if the trie is frozen */ U_CAPI void U_EXPORT2 utrie2_set32(UTrie2 *trie, UChar32 c, uint32_t value, UErrorCode *pErrorCode); /** * Set a value in a range of code points [start..end]. * All code points c with start<=c<=end will get the value if * overwrite is true or if the old value is the initial value. * * @param trie the unfrozen trie * @param start the first code point to get the value * @param end the last code point to get the value (inclusive) * @param value the value * @param overwrite flag for whether old non-initial values are to be overwritten * @param pErrorCode an in/out ICU UErrorCode; among other possible error codes: * - U_NO_WRITE_PERMISSION if the trie is frozen */ U_CAPI void U_EXPORT2 utrie2_setRange32(UTrie2 *trie, UChar32 start, UChar32 end, uint32_t value, UBool overwrite, UErrorCode *pErrorCode); /** * Freeze a trie. Make it immutable (read-only) and compact it, * ready for serialization and for use with fast macros. * Functions to set values will fail after serializing. * * A trie can be frozen only once. If this function is called again with different * valueBits then it will set a U_ILLEGAL_ARGUMENT_ERROR. * * @param trie the trie * @param valueBits selects the data entry size; if smaller than 32 bits, then * the values stored in the trie will be truncated * @param pErrorCode an in/out ICU UErrorCode; among other possible error codes: * - U_INDEX_OUTOFBOUNDS_ERROR if the compacted index or data arrays are too long * for serialization * (the trie will be immutable and usable, * but not frozen and not usable with the fast macros) * * @see utrie2_cloneAsThawed */ U_CAPI void U_EXPORT2 utrie2_freeze(UTrie2 *trie, UTrie2ValueBits valueBits, UErrorCode *pErrorCode); /** * Test if the trie is frozen. (See utrie2_freeze().) * * @param trie the trie * @return true if the trie is frozen, that is, immutable, ready for serialization * and for use with fast macros */ U_CAPI UBool U_EXPORT2 utrie2_isFrozen(const UTrie2 *trie); /** * Serialize a frozen trie into 32-bit aligned memory. * If the trie is not frozen, then the function returns with a U_ILLEGAL_ARGUMENT_ERROR. * A trie can be serialized multiple times. * * @param trie the frozen trie * @param data a pointer to 32-bit-aligned memory to be filled with the trie data, * can be NULL if capacity==0 * @param capacity the number of bytes available at data, * or 0 for preflighting * @param pErrorCode an in/out ICU UErrorCode; among other possible error codes: * - U_BUFFER_OVERFLOW_ERROR if the data storage block is too small for serialization * - U_ILLEGAL_ARGUMENT_ERROR if the trie is not frozen or the data and capacity * parameters are bad * @return the number of bytes written or needed for the trie * * @see utrie2_openFromSerialized() */ U_CAPI int32_t U_EXPORT2 utrie2_serialize(const UTrie2 *trie, void *data, int32_t capacity, UErrorCode *pErrorCode); /* Public UTrie2 API: miscellaneous functions ------------------------------- */ /** * Build a UTrie2 (version 2) from a UTrie (version 1). * Enumerates all values in the UTrie and builds a UTrie2 with the same values. * The resulting UTrie2 will be frozen. * * @param trie1 the runtime UTrie structure to be enumerated * @param errorValue the value for out-of-range code points and illegal UTF-8 * @param pErrorCode an in/out ICU UErrorCode * @return The frozen UTrie2 with the same values as the UTrie. */ U_CAPI UTrie2 * U_EXPORT2 utrie2_fromUTrie(const UTrie *trie1, uint32_t errorValue, UErrorCode *pErrorCode); /* Public UTrie2 API macros ------------------------------------------------- */ /* * These macros provide fast data lookup from a frozen trie. * They will crash when used on an unfrozen trie. */ /** * Return a 16-bit trie value from a code point, with range checking. * Returns trie->errorValue if c is not in the range 0..U+10ffff. * * @param trie (const UTrie2 *, in) a frozen trie * @param c (UChar32, in) the input code point * @return (uint16_t) The code point's trie value. */ #define UTRIE2_GET16(trie, c) _UTRIE2_GET((trie), index, (trie)->indexLength, (c)) /** * Return a 32-bit trie value from a code point, with range checking. * Returns trie->errorValue if c is not in the range 0..U+10ffff. * * @param trie (const UTrie2 *, in) a frozen trie * @param c (UChar32, in) the input code point * @return (uint32_t) The code point's trie value. */ #define UTRIE2_GET32(trie, c) _UTRIE2_GET((trie), data32, 0, (c)) /** * UTF-16: Get the next code point (UChar32 c, out), post-increment src, * and get a 16-bit value from the trie. * * @param trie (const UTrie2 *, in) a frozen trie * @param src (const UChar *, in/out) the source text pointer * @param limit (const UChar *, in) the limit pointer for the text, or NULL if NUL-terminated * @param c (UChar32, out) variable for the code point * @param result (uint16_t, out) uint16_t variable for the trie lookup result */ #define UTRIE2_U16_NEXT16(trie, src, limit, c, result) _UTRIE2_U16_NEXT(trie, index, src, limit, c, result) /** * UTF-16: Get the next code point (UChar32 c, out), post-increment src, * and get a 32-bit value from the trie. * * @param trie (const UTrie2 *, in) a frozen trie * @param src (const UChar *, in/out) the source text pointer * @param limit (const UChar *, in) the limit pointer for the text, or NULL if NUL-terminated * @param c (UChar32, out) variable for the code point * @param result (uint32_t, out) uint32_t variable for the trie lookup result */ #define UTRIE2_U16_NEXT32(trie, src, limit, c, result) _UTRIE2_U16_NEXT(trie, data32, src, limit, c, result) /** * UTF-16: Get the previous code point (UChar32 c, out), pre-decrement src, * and get a 16-bit value from the trie. * * @param trie (const UTrie2 *, in) a frozen trie * @param start (const UChar *, in) the start pointer for the text * @param src (const UChar *, in/out) the source text pointer * @param c (UChar32, out) variable for the code point * @param result (uint16_t, out) uint16_t variable for the trie lookup result */ #define UTRIE2_U16_PREV16(trie, start, src, c, result) _UTRIE2_U16_PREV(trie, index, start, src, c, result) /** * UTF-16: Get the previous code point (UChar32 c, out), pre-decrement src, * and get a 32-bit value from the trie. * * @param trie (const UTrie2 *, in) a frozen trie * @param start (const UChar *, in) the start pointer for the text * @param src (const UChar *, in/out) the source text pointer * @param c (UChar32, out) variable for the code point * @param result (uint32_t, out) uint32_t variable for the trie lookup result */ #define UTRIE2_U16_PREV32(trie, start, src, c, result) _UTRIE2_U16_PREV(trie, data32, start, src, c, result) /** * UTF-8: Post-increment src and get a 16-bit value from the trie. * * @param trie (const UTrie2 *, in) a frozen trie * @param src (const char *, in/out) the source text pointer * @param limit (const char *, in) the limit pointer for the text (must not be NULL) * @param result (uint16_t, out) uint16_t variable for the trie lookup result */ #define UTRIE2_U8_NEXT16(trie, src, limit, result)\ _UTRIE2_U8_NEXT(trie, data16, index, src, limit, result) /** * UTF-8: Post-increment src and get a 32-bit value from the trie. * * @param trie (const UTrie2 *, in) a frozen trie * @param src (const char *, in/out) the source text pointer * @param limit (const char *, in) the limit pointer for the text (must not be NULL) * @param result (uint16_t, out) uint32_t variable for the trie lookup result */ #define UTRIE2_U8_NEXT32(trie, src, limit, result) \ _UTRIE2_U8_NEXT(trie, data32, data32, src, limit, result) /** * UTF-8: Pre-decrement src and get a 16-bit value from the trie. * * @param trie (const UTrie2 *, in) a frozen trie * @param start (const char *, in) the start pointer for the text * @param src (const char *, in/out) the source text pointer * @param result (uint16_t, out) uint16_t variable for the trie lookup result */ #define UTRIE2_U8_PREV16(trie, start, src, result) \ _UTRIE2_U8_PREV(trie, data16, index, start, src, result) /** * UTF-8: Pre-decrement src and get a 32-bit value from the trie. * * @param trie (const UTrie2 *, in) a frozen trie * @param start (const char *, in) the start pointer for the text * @param src (const char *, in/out) the source text pointer * @param result (uint16_t, out) uint32_t variable for the trie lookup result */ #define UTRIE2_U8_PREV32(trie, start, src, result) \ _UTRIE2_U8_PREV(trie, data32, data32, start, src, result) /* Public UTrie2 API: optimized UTF-16 access ------------------------------- */ /* * The following functions and macros are used for highly optimized UTF-16 * text processing. The UTRIE2_U16_NEXTxy() macros do not depend on these. * * A UTrie2 stores separate values for lead surrogate code _units_ vs. code _points_. * UTF-16 text processing can be optimized by detecting surrogate pairs and * assembling supplementary code points only when there is non-trivial data * available. * * At build-time, use utrie2_enumForLeadSurrogate() to see if there * is non-trivial (non-initialValue) data for any of the supplementary * code points associated with a lead surrogate. * If so, then set a special (application-specific) value for the * lead surrogate code _unit_, with utrie2_set32ForLeadSurrogateCodeUnit(). * * At runtime, use UTRIE2_GET16_FROM_U16_SINGLE_LEAD() or * UTRIE2_GET32_FROM_U16_SINGLE_LEAD() per code unit. If there is non-trivial * data and the code unit is a lead surrogate, then check if a trail surrogate * follows. If so, assemble the supplementary code point with * U16_GET_SUPPLEMENTARY() and look up its value with UTRIE2_GET16_FROM_SUPP() * or UTRIE2_GET32_FROM_SUPP(); otherwise reset the lead * surrogate's value or do a code point lookup for it. * * If there is only trivial data for lead and trail surrogates, then processing * can often skip them. For example, in normalization or case mapping * all characters that do not have any mappings are simply copied as is. */ /** * Get a value from a lead surrogate code unit as stored in the trie. * * @param trie the trie * @param c the code unit (U+D800..U+DBFF) * @return the value */ U_CAPI uint32_t U_EXPORT2 utrie2_get32FromLeadSurrogateCodeUnit(const UTrie2 *trie, UChar32 c); /** * Enumerate the trie values for the 1024=0x400 code points * corresponding to a given lead surrogate. * For example, for the lead surrogate U+D87E it will enumerate the values * for [U+2F800..U+2FC00[. * Used by data builder code that sets special lead surrogate code unit values * for optimized UTF-16 string processing. * * Do not modify the trie during the enumeration. * * Except for the limited code point range, this functions just like utrie2_enum(): * For each entry in the trie, the value to be delivered is passed through * the UTrie2EnumValue function. * The value is unchanged if that function pointer is NULL. * * For each contiguous range of code points with a given (transformed) value, * the UTrie2EnumRange function is called. * * @param trie a pointer to the trie * @param enumValue a pointer to a function that may transform the trie entry value, * or NULL if the values from the trie are to be used directly * @param enumRange a pointer to a function that is called for each contiguous range * of code points with the same (transformed) value * @param context an opaque pointer that is passed on to the callback functions */ U_CAPI void U_EXPORT2 utrie2_enumForLeadSurrogate(const UTrie2 *trie, UChar32 lead, UTrie2EnumValue *enumValue, UTrie2EnumRange *enumRange, const void *context); /** * Set a value for a lead surrogate code unit. * * @param trie the unfrozen trie * @param lead the lead surrogate code unit (U+D800..U+DBFF) * @param value the value * @param pErrorCode an in/out ICU UErrorCode; among other possible error codes: * - U_NO_WRITE_PERMISSION if the trie is frozen */ U_CAPI void U_EXPORT2 utrie2_set32ForLeadSurrogateCodeUnit(UTrie2 *trie, UChar32 lead, uint32_t value, UErrorCode *pErrorCode); /** * Return a 16-bit trie value from a UTF-16 single/lead code unit (<=U+ffff). * Same as UTRIE2_GET16() if c is a BMP code point except for lead surrogates, * but smaller and faster. * * @param trie (const UTrie2 *, in) a frozen trie * @param c (UChar32, in) the input code unit, must be 0<=c<=U+ffff * @return (uint16_t) The code unit's trie value. */ #define UTRIE2_GET16_FROM_U16_SINGLE_LEAD(trie, c) _UTRIE2_GET_FROM_U16_SINGLE_LEAD((trie), index, c) /** * Return a 32-bit trie value from a UTF-16 single/lead code unit (<=U+ffff). * Same as UTRIE2_GET32() if c is a BMP code point except for lead surrogates, * but smaller and faster. * * @param trie (const UTrie2 *, in) a frozen trie * @param c (UChar32, in) the input code unit, must be 0<=c<=U+ffff * @return (uint32_t) The code unit's trie value. */ #define UTRIE2_GET32_FROM_U16_SINGLE_LEAD(trie, c) _UTRIE2_GET_FROM_U16_SINGLE_LEAD((trie), data32, c) /** * Return a 16-bit trie value from a supplementary code point (U+10000..U+10ffff). * * @param trie (const UTrie2 *, in) a frozen trie * @param c (UChar32, in) the input code point, must be U+10000<=c<=U+10ffff * @return (uint16_t) The code point's trie value. */ #define UTRIE2_GET16_FROM_SUPP(trie, c) _UTRIE2_GET_FROM_SUPP((trie), index, c) /** * Return a 32-bit trie value from a supplementary code point (U+10000..U+10ffff). * * @param trie (const UTrie2 *, in) a frozen trie * @param c (UChar32, in) the input code point, must be U+10000<=c<=U+10ffff * @return (uint32_t) The code point's trie value. */ #define UTRIE2_GET32_FROM_SUPP(trie, c) _UTRIE2_GET_FROM_SUPP((trie), data32, c) U_CDECL_END /* C++ convenience wrappers ------------------------------------------------- */ #ifdef __cplusplus #include "unicode/utf.h" #include "mutex.h" U_NAMESPACE_BEGIN // Use the Forward/Backward subclasses below. class UTrie2StringIterator : public UMemory { public: UTrie2StringIterator(const UTrie2 *t, const UChar *p) : trie(t), codePointStart(p), codePointLimit(p), codePoint(U_SENTINEL) {} const UTrie2 *trie; const UChar *codePointStart, *codePointLimit; UChar32 codePoint; }; class BackwardUTrie2StringIterator : public UTrie2StringIterator { public: BackwardUTrie2StringIterator(const UTrie2 *t, const UChar *s, const UChar *p) : UTrie2StringIterator(t, p), start(s) {} uint16_t previous16(); const UChar *start; }; class ForwardUTrie2StringIterator : public UTrie2StringIterator { public: // Iteration limit l can be NULL. // In that case, the caller must detect c==0 and stop. ForwardUTrie2StringIterator(const UTrie2 *t, const UChar *p, const UChar *l) : UTrie2StringIterator(t, p), limit(l) {} uint16_t next16(); const UChar *limit; }; U_NAMESPACE_END #endif /* Internal definitions ----------------------------------------------------- */ U_CDECL_BEGIN /** Build-time trie structure. */ struct UNewTrie2; typedef struct UNewTrie2 UNewTrie2; /* * Trie structure definition. * * Either the data table is 16 bits wide and accessed via the index * pointer, with each index item increased by indexLength; * in this case, data32==NULL, and data16 is used for direct ASCII access. * * Or the data table is 32 bits wide and accessed via the data32 pointer. */ struct UTrie2 { /* protected: used by macros and functions for reading values */ const uint16_t *index; const uint16_t *data16; /* for fast UTF-8 ASCII access, if 16b data */ const uint32_t *data32; /* NULL if 16b data is used via index */ int32_t indexLength, dataLength; uint16_t index2NullOffset; /* 0xffff if there is no dedicated index-2 null block */ uint16_t dataNullOffset; uint32_t initialValue; /** Value returned for out-of-range code points and illegal UTF-8. */ uint32_t errorValue; /* Start of the last range which ends at U+10ffff, and its value. */ UChar32 highStart; int32_t highValueIndex; /* private: used by builder and unserialization functions */ void *memory; /* serialized bytes; NULL if not frozen yet */ int32_t length; /* number of serialized bytes at memory; 0 if not frozen yet */ UBool isMemoryOwned; /* true if the trie owns the memory */ UBool padding1; int16_t padding2; UNewTrie2 *newTrie; /* builder object; NULL when frozen */ #ifdef UTRIE2_DEBUG const char *name; #endif }; /** * Trie constants, defining shift widths, index array lengths, etc. * * These are needed for the runtime macros but users can treat these as * implementation details and skip to the actual public API further below. */ enum { /** Shift size for getting the index-1 table offset. */ UTRIE2_SHIFT_1=6+5, /** Shift size for getting the index-2 table offset. */ UTRIE2_SHIFT_2=5, /** * Difference between the two shift sizes, * for getting an index-1 offset from an index-2 offset. 6=11-5 */ UTRIE2_SHIFT_1_2=UTRIE2_SHIFT_1-UTRIE2_SHIFT_2, /** * Number of index-1 entries for the BMP. 32=0x20 * This part of the index-1 table is omitted from the serialized form. */ UTRIE2_OMITTED_BMP_INDEX_1_LENGTH=0x10000>>UTRIE2_SHIFT_1, /** Number of code points per index-1 table entry. 2048=0x800 */ UTRIE2_CP_PER_INDEX_1_ENTRY=1<<UTRIE2_SHIFT_1, /** Number of entries in an index-2 block. 64=0x40 */ UTRIE2_INDEX_2_BLOCK_LENGTH=1<<UTRIE2_SHIFT_1_2, /** Mask for getting the lower bits for the in-index-2-block offset. */ UTRIE2_INDEX_2_MASK=UTRIE2_INDEX_2_BLOCK_LENGTH-1, /** Number of entries in a data block. 32=0x20 */ UTRIE2_DATA_BLOCK_LENGTH=1<<UTRIE2_SHIFT_2, /** Mask for getting the lower bits for the in-data-block offset. */ UTRIE2_DATA_MASK=UTRIE2_DATA_BLOCK_LENGTH-1, /** * Shift size for shifting left the index array values. * Increases possible data size with 16-bit index values at the cost * of compactability. * This requires data blocks to be aligned by UTRIE2_DATA_GRANULARITY. */ UTRIE2_INDEX_SHIFT=2, /** The alignment size of a data block. Also the granularity for compaction. */ UTRIE2_DATA_GRANULARITY=1<<UTRIE2_INDEX_SHIFT, /* Fixed layout of the first part of the index array. ------------------- */ /** * The BMP part of the index-2 table is fixed and linear and starts at offset 0. * Length=2048=0x800=0x10000>>UTRIE2_SHIFT_2. */ UTRIE2_INDEX_2_OFFSET=0, /** * The part of the index-2 table for U+D800..U+DBFF stores values for * lead surrogate code _units_ not code _points_. * Values for lead surrogate code _points_ are indexed with this portion of the table. * Length=32=0x20=0x400>>UTRIE2_SHIFT_2. (There are 1024=0x400 lead surrogates.) */ UTRIE2_LSCP_INDEX_2_OFFSET=0x10000>>UTRIE2_SHIFT_2, UTRIE2_LSCP_INDEX_2_LENGTH=0x400>>UTRIE2_SHIFT_2, /** Count the lengths of both BMP pieces. 2080=0x820 */ UTRIE2_INDEX_2_BMP_LENGTH=UTRIE2_LSCP_INDEX_2_OFFSET+UTRIE2_LSCP_INDEX_2_LENGTH, /** * The 2-byte UTF-8 version of the index-2 table follows at offset 2080=0x820. * Length 32=0x20 for lead bytes C0..DF, regardless of UTRIE2_SHIFT_2. */ UTRIE2_UTF8_2B_INDEX_2_OFFSET=UTRIE2_INDEX_2_BMP_LENGTH, UTRIE2_UTF8_2B_INDEX_2_LENGTH=0x800>>6, /* U+0800 is the first code point after 2-byte UTF-8 */ /** * The index-1 table, only used for supplementary code points, at offset 2112=0x840. * Variable length, for code points up to highStart, where the last single-value range starts. * Maximum length 512=0x200=0x100000>>UTRIE2_SHIFT_1. * (For 0x100000 supplementary code points U+10000..U+10ffff.) * * The part of the index-2 table for supplementary code points starts * after this index-1 table. * * Both the index-1 table and the following part of the index-2 table * are omitted completely if there is only BMP data. */ UTRIE2_INDEX_1_OFFSET=UTRIE2_UTF8_2B_INDEX_2_OFFSET+UTRIE2_UTF8_2B_INDEX_2_LENGTH, UTRIE2_MAX_INDEX_1_LENGTH=0x100000>>UTRIE2_SHIFT_1, /* * Fixed layout of the first part of the data array. ----------------------- * Starts with 4 blocks (128=0x80 entries) for ASCII. */ /** * The illegal-UTF-8 data block follows the ASCII block, at offset 128=0x80. * Used with linear access for single bytes 0..0xbf for simple error handling. * Length 64=0x40, not UTRIE2_DATA_BLOCK_LENGTH. */ UTRIE2_BAD_UTF8_DATA_OFFSET=0x80, /** The start of non-linear-ASCII data blocks, at offset 192=0xc0. */ UTRIE2_DATA_START_OFFSET=0xc0 }; /* Internal functions and macros -------------------------------------------- */ /** * Internal function for part of the UTRIE2_U8_NEXTxx() macro implementations. * Do not call directly. * @internal */ U_CAPI int32_t U_EXPORT2 utrie2_internalU8NextIndex(const UTrie2 *trie, UChar32 c, const uint8_t *src, const uint8_t *limit); /** * Internal function for part of the UTRIE2_U8_PREVxx() macro implementations. * Do not call directly. * @internal */ U_CAPI int32_t U_EXPORT2 utrie2_internalU8PrevIndex(const UTrie2 *trie, UChar32 c, const uint8_t *start, const uint8_t *src); /** Internal low-level trie getter. Returns a data index. */ #define _UTRIE2_INDEX_RAW(offset, trieIndex, c) \ (((int32_t)((trieIndex)[(offset)+((c)>>UTRIE2_SHIFT_2)]) \ <<UTRIE2_INDEX_SHIFT)+ \ ((c)&UTRIE2_DATA_MASK)) /** Internal trie getter from a UTF-16 single/lead code unit. Returns the data index. */ #define _UTRIE2_INDEX_FROM_U16_SINGLE_LEAD(trieIndex, c) _UTRIE2_INDEX_RAW(0, trieIndex, c) /** Internal trie getter from a lead surrogate code point (D800..DBFF). Returns the data index. */ #define _UTRIE2_INDEX_FROM_LSCP(trieIndex, c) \ _UTRIE2_INDEX_RAW(UTRIE2_LSCP_INDEX_2_OFFSET-(0xd800>>UTRIE2_SHIFT_2), trieIndex, c) /** Internal trie getter from a BMP code point. Returns the data index. */ #define _UTRIE2_INDEX_FROM_BMP(trieIndex, c) \ _UTRIE2_INDEX_RAW(U_IS_LEAD(c) ? UTRIE2_LSCP_INDEX_2_OFFSET-(0xd800>>UTRIE2_SHIFT_2) : 0, \ trieIndex, c) /** Internal trie getter from a supplementary code point below highStart. Returns the data index. */ #define _UTRIE2_INDEX_FROM_SUPP(trieIndex, c) \ (((int32_t)((trieIndex)[ \ (trieIndex)[(UTRIE2_INDEX_1_OFFSET-UTRIE2_OMITTED_BMP_INDEX_1_LENGTH)+ \ ((c)>>UTRIE2_SHIFT_1)]+ \ (((c)>>UTRIE2_SHIFT_2)&UTRIE2_INDEX_2_MASK)]) \ <<UTRIE2_INDEX_SHIFT)+ \ ((c)&UTRIE2_DATA_MASK)) /** * Internal trie getter from a code point, with checking that c is in 0..10FFFF. * Returns the data index. */ #define _UTRIE2_INDEX_FROM_CP(trie, asciiOffset, c) \ ((uint32_t)(c)<0xd800 ? \ _UTRIE2_INDEX_RAW(0, (trie)->index, c) : \ (uint32_t)(c)<=0xffff ? \ _UTRIE2_INDEX_RAW( \ (c)<=0xdbff ? UTRIE2_LSCP_INDEX_2_OFFSET-(0xd800>>UTRIE2_SHIFT_2) : 0, \ (trie)->index, c) : \ (uint32_t)(c)>0x10ffff ? \ (asciiOffset)+UTRIE2_BAD_UTF8_DATA_OFFSET : \ (c)>=(trie)->highStart ? \ (trie)->highValueIndex : \ _UTRIE2_INDEX_FROM_SUPP((trie)->index, c)) /** Internal trie getter from a UTF-16 single/lead code unit. Returns the data. */ #define _UTRIE2_GET_FROM_U16_SINGLE_LEAD(trie, data, c) \ (trie)->data[_UTRIE2_INDEX_FROM_U16_SINGLE_LEAD((trie)->index, c)] /** Internal trie getter from a supplementary code point. Returns the data. */ #define _UTRIE2_GET_FROM_SUPP(trie, data, c) \ (trie)->data[(c)>=(trie)->highStart ? (trie)->highValueIndex : \ _UTRIE2_INDEX_FROM_SUPP((trie)->index, c)] /** * Internal trie getter from a code point, with checking that c is in 0..10FFFF. * Returns the data. */ #define _UTRIE2_GET(trie, data, asciiOffset, c) \ (trie)->data[_UTRIE2_INDEX_FROM_CP(trie, asciiOffset, c)] /** Internal next-post-increment: get the next code point (c) and its data. */ #define _UTRIE2_U16_NEXT(trie, data, src, limit, c, result) UPRV_BLOCK_MACRO_BEGIN { \ { \ uint16_t __c2; \ (c)=*(src)++; \ if(!U16_IS_LEAD(c)) { \ (result)=_UTRIE2_GET_FROM_U16_SINGLE_LEAD(trie, data, c); \ } else if((src)==(limit) || !U16_IS_TRAIL(__c2=*(src))) { \ (result)=(trie)->data[_UTRIE2_INDEX_FROM_LSCP((trie)->index, c)]; \ } else { \ ++(src); \ (c)=U16_GET_SUPPLEMENTARY((c), __c2); \ (result)=_UTRIE2_GET_FROM_SUPP((trie), data, (c)); \ } \ } \ } UPRV_BLOCK_MACRO_END /** Internal pre-decrement-previous: get the previous code point (c) and its data */ #define _UTRIE2_U16_PREV(trie, data, start, src, c, result) UPRV_BLOCK_MACRO_BEGIN { \ { \ uint16_t __c2; \ (c)=*--(src); \ if(!U16_IS_TRAIL(c) || (src)==(start) || !U16_IS_LEAD(__c2=*((src)-1))) { \ (result)=(trie)->data[_UTRIE2_INDEX_FROM_BMP((trie)->index, c)]; \ } else { \ --(src); \ (c)=U16_GET_SUPPLEMENTARY(__c2, (c)); \ (result)=_UTRIE2_GET_FROM_SUPP((trie), data, (c)); \ } \ } \ } UPRV_BLOCK_MACRO_END /** Internal UTF-8 next-post-increment: get the next code point's data. */ #define _UTRIE2_U8_NEXT(trie, ascii, data, src, limit, result) UPRV_BLOCK_MACRO_BEGIN { \ uint8_t __lead=(uint8_t)*(src)++; \ if(U8_IS_SINGLE(__lead)) { \ (result)=(trie)->ascii[__lead]; \ } else { \ uint8_t __t1, __t2; \ if( /* handle U+0800..U+FFFF inline */ \ 0xe0<=__lead && __lead<0xf0 && ((src)+1)<(limit) && \ U8_IS_VALID_LEAD3_AND_T1(__lead, __t1=(uint8_t)*(src)) && \ (__t2=(uint8_t)(*((src)+1)-0x80))<= 0x3f \ ) { \ (src)+=2; \ (result)=(trie)->data[ \ ((int32_t)((trie)->index[((__lead-0xe0)<<(12-UTRIE2_SHIFT_2))+ \ ((__t1&0x3f)<<(6-UTRIE2_SHIFT_2))+(__t2>>UTRIE2_SHIFT_2)]) \ <<UTRIE2_INDEX_SHIFT)+ \ (__t2&UTRIE2_DATA_MASK)]; \ } else if( /* handle U+0080..U+07FF inline */ \ __lead<0xe0 && __lead>=0xc2 && (src)<(limit) && \ (__t1=(uint8_t)(*(src)-0x80))<=0x3f \ ) { \ ++(src); \ (result)=(trie)->data[ \ (trie)->index[(UTRIE2_UTF8_2B_INDEX_2_OFFSET-0xc0)+__lead]+ \ __t1]; \ } else { \ int32_t __index=utrie2_internalU8NextIndex((trie), __lead, (const uint8_t *)(src), \ (const uint8_t *)(limit)); \ (src)+=__index&7; \ (result)=(trie)->data[__index>>3]; \ } \ } \ } UPRV_BLOCK_MACRO_END /** Internal UTF-8 pre-decrement-previous: get the previous code point's data. */ #define _UTRIE2_U8_PREV(trie, ascii, data, start, src, result) UPRV_BLOCK_MACRO_BEGIN { \ uint8_t __b=(uint8_t)*--(src); \ if(U8_IS_SINGLE(__b)) { \ (result)=(trie)->ascii[__b]; \ } else { \ int32_t __index=utrie2_internalU8PrevIndex((trie), __b, (const uint8_t *)(start), \ (const uint8_t *)(src)); \ (src)-=__index&7; \ (result)=(trie)->data[__index>>3]; \ } \ } UPRV_BLOCK_MACRO_END U_CDECL_END #endif