#!/usr/bin/env perl # # ==================================================================== # Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL # project. The module is, however, dual licensed under OpenSSL and # CRYPTOGAMS licenses depending on where you obtain it. For further # details see http://www.openssl.org/~appro/cryptogams/. # ==================================================================== # January 2010 # # "Teaser" Montgomery multiplication module for IA-64. There are # several possibilities for improvement: # # - modulo-scheduling outer loop would eliminate quite a number of # stalls after ldf8, xma and getf.sig outside inner loop and # improve shorter key performance; # - shorter vector support [with input vectors being fetched only # once] should be added; # - 2x unroll with help of n0[1] would make the code scalable on # "wider" IA-64, "wider" than Itanium 2 that is, which is not of # acute interest, because upcoming Tukwila's individual cores are # reportedly based on Itanium 2 design; # - dedicated squaring procedure(?); # # January 2010 # # Shorter vector support is implemented by zero-padding ap and np # vectors up to 8 elements, or 512 bits. This means that 256-bit # inputs will be processed only 2 times faster than 512-bit inputs, # not 4 [as one would expect, because algorithm complexity is n^2]. # The reason for padding is that inputs shorter than 512 bits won't # be processed faster anyway, because minimal critical path of the # core loop happens to match 512-bit timing. Either way, it resulted # in >100% improvement of 512-bit RSA sign benchmark and 50% - of # 1024-bit one [in comparison to original version of *this* module]. # # So far 'openssl speed rsa dsa' output on 900MHz Itanium 2 *with* # this module is: # sign verify sign/s verify/s # rsa 512 bits 0.000290s 0.000024s 3452.8 42031.4 # rsa 1024 bits 0.000793s 0.000058s 1261.7 17172.0 # rsa 2048 bits 0.005908s 0.000148s 169.3 6754.0 # rsa 4096 bits 0.033456s 0.000469s 29.9 2133.6 # dsa 512 bits 0.000253s 0.000198s 3949.9 5057.0 # dsa 1024 bits 0.000585s 0.000607s 1708.4 1647.4 # dsa 2048 bits 0.001453s 0.001703s 688.1 587.4 # # ... and *without* (but still with ia64.S): # # rsa 512 bits 0.000670s 0.000041s 1491.8 24145.5 # rsa 1024 bits 0.001988s 0.000080s 502.9 12499.3 # rsa 2048 bits 0.008702s 0.000189s 114.9 5293.9 # rsa 4096 bits 0.043860s 0.000533s 22.8 1875.9 # dsa 512 bits 0.000441s 0.000427s 2265.3 2340.6 # dsa 1024 bits 0.000823s 0.000867s 1215.6 1153.2 # dsa 2048 bits 0.001894s 0.002179s 528.1 458.9 # # As it can be seen, RSA sign performance improves by 130-30%, # hereafter less for longer keys, while verify - by 74-13%. # DSA performance improves by 115-30%. if ($^O eq "hpux") { $ADDP="addp4"; for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); } } else { $ADDP="add"; } $code=<<___; .explicit .text // int bn_mul_mont (BN_ULONG *rp,const BN_ULONG *ap, // const BN_ULONG *bp,const BN_ULONG *np, // const BN_ULONG *n0p,int num); .align 64 .global bn_mul_mont# .proc bn_mul_mont# bn_mul_mont: .prologue .body { .mmi; cmp4.le p6,p7=2,r37;; (p6) cmp4.lt.unc p8,p9=8,r37 mov ret0=r0 };; { .bbb; (p9) br.cond.dptk.many bn_mul_mont_8 (p8) br.cond.dpnt.many bn_mul_mont_general (p7) br.ret.spnt.many b0 };; .endp bn_mul_mont# prevfs=r2; prevpr=r3; prevlc=r10; prevsp=r11; rptr=r8; aptr=r9; bptr=r14; nptr=r15; tptr=r16; // &tp[0] tp_1=r17; // &tp[-1] num=r18; len=r19; lc=r20; topbit=r21; // carry bit from tmp[num] n0=f6; m0=f7; bi=f8; .align 64 .local bn_mul_mont_general# .proc bn_mul_mont_general# bn_mul_mont_general: .prologue { .mmi; .save ar.pfs,prevfs alloc prevfs=ar.pfs,6,2,0,8 $ADDP aptr=0,in1 .save ar.lc,prevlc mov prevlc=ar.lc } { .mmi; .vframe prevsp mov prevsp=sp $ADDP bptr=0,in2 .save pr,prevpr mov prevpr=pr };; .body .rotf alo[6],nlo[4],ahi[8],nhi[6] .rotr a[3],n[3],t[2] { .mmi; ldf8 bi=[bptr],8 // (*bp++) ldf8 alo[4]=[aptr],16 // ap[0] $ADDP r30=8,in1 };; { .mmi; ldf8 alo[3]=[r30],16 // ap[1] ldf8 alo[2]=[aptr],16 // ap[2] $ADDP in4=0,in4 };; { .mmi; ldf8 alo[1]=[r30] // ap[3] ldf8 n0=[in4] // n0 $ADDP rptr=0,in0 } { .mmi; $ADDP nptr=0,in3 mov r31=16 zxt4 num=in5 };; { .mmi; ldf8 nlo[2]=[nptr],8 // np[0] shladd len=num,3,r0 shladd r31=num,3,r31 };; { .mmi; ldf8 nlo[1]=[nptr],8 // np[1] add lc=-5,num sub r31=sp,r31 };; { .mfb; and sp=-16,r31 // alloca xmpy.hu ahi[2]=alo[4],bi // ap[0]*bp[0] nop.b 0 } { .mfb; nop.m 0 xmpy.lu alo[4]=alo[4],bi brp.loop.imp .L1st_ctop,.L1st_cend-16 };; { .mfi; nop.m 0 xma.hu ahi[1]=alo[3],bi,ahi[2] // ap[1]*bp[0] add tp_1=8,sp } { .mfi; nop.m 0 xma.lu alo[3]=alo[3],bi,ahi[2] mov pr.rot=0x20001f<<16 // ------^----- (p40) at first (p23) // ----------^^ p[16:20]=1 };; { .mfi; nop.m 0 xmpy.lu m0=alo[4],n0 // (ap[0]*bp[0])*n0 mov ar.lc=lc } { .mfi; nop.m 0 fcvt.fxu.s1 nhi[1]=f0 mov ar.ec=8 };; .align 32 .L1st_ctop: .pred.rel "mutex",p40,p42 { .mfi; (p16) ldf8 alo[0]=[aptr],8 // *(aptr++) (p18) xma.hu ahi[0]=alo[2],bi,ahi[1] (p40) add n[2]=n[2],a[2] } // (p23) } { .mfi; (p18) ldf8 nlo[0]=[nptr],8 // *(nptr++)(p16) (p18) xma.lu alo[2]=alo[2],bi,ahi[1] (p42) add n[2]=n[2],a[2],1 };; // (p23) { .mfi; (p21) getf.sig a[0]=alo[5] (p20) xma.hu nhi[0]=nlo[2],m0,nhi[1] (p42) cmp.leu p41,p39=n[2],a[2] } // (p23) { .mfi; (p23) st8 [tp_1]=n[2],8 (p20) xma.lu nlo[2]=nlo[2],m0,nhi[1] (p40) cmp.ltu p41,p39=n[2],a[2] } // (p23) { .mmb; (p21) getf.sig n[0]=nlo[3] (p16) nop.m 0 br.ctop.sptk .L1st_ctop };; .L1st_cend: { .mmi; getf.sig a[0]=ahi[6] // (p24) getf.sig n[0]=nhi[4] add num=-1,num };; // num-- { .mmi; .pred.rel "mutex",p40,p42 (p40) add n[0]=n[0],a[0] (p42) add n[0]=n[0],a[0],1 sub aptr=aptr,len };; // rewind { .mmi; .pred.rel "mutex",p40,p42 (p40) cmp.ltu p41,p39=n[0],a[0] (p42) cmp.leu p41,p39=n[0],a[0] sub nptr=nptr,len };; { .mmi; .pred.rel "mutex",p39,p41 (p39) add topbit=r0,r0 (p41) add topbit=r0,r0,1 nop.i 0 } { .mmi; st8 [tp_1]=n[0] add tptr=16,sp add tp_1=8,sp };; .Louter: { .mmi; ldf8 bi=[bptr],8 // (*bp++) ldf8 ahi[3]=[tptr] // tp[0] add r30=8,aptr };; { .mmi; ldf8 alo[4]=[aptr],16 // ap[0] ldf8 alo[3]=[r30],16 // ap[1] add r31=8,nptr };; { .mfb; ldf8 alo[2]=[aptr],16 // ap[2] xma.hu ahi[2]=alo[4],bi,ahi[3] // ap[0]*bp[i]+tp[0] brp.loop.imp .Linner_ctop,.Linner_cend-16 } { .mfb; ldf8 alo[1]=[r30] // ap[3] xma.lu alo[4]=alo[4],bi,ahi[3] clrrrb.pr };; { .mfi; ldf8 nlo[2]=[nptr],16 // np[0] xma.hu ahi[1]=alo[3],bi,ahi[2] // ap[1]*bp[i] nop.i 0 } { .mfi; ldf8 nlo[1]=[r31] // np[1] xma.lu alo[3]=alo[3],bi,ahi[2] mov pr.rot=0x20101f<<16 // ------^----- (p40) at first (p23) // --------^--- (p30) at first (p22) // ----------^^ p[16:20]=1 };; { .mfi; st8 [tptr]=r0 // tp[0] is already accounted xmpy.lu m0=alo[4],n0 // (ap[0]*bp[i]+tp[0])*n0 mov ar.lc=lc } { .mfi; fcvt.fxu.s1 nhi[1]=f0 mov ar.ec=8 };; // This loop spins in 4*(n+7) ticks on Itanium 2 and should spin in // 7*(n+7) ticks on Itanium (the one codenamed Merced). Factor of 7 // in latter case accounts for two-tick pipeline stall, which means // that its performance would be ~20% lower than optimal one. No // attempt was made to address this, because original Itanium is // hardly represented out in the wild... .align 32 .Linner_ctop: .pred.rel "mutex",p40,p42 .pred.rel "mutex",p30,p32 { .mfi; (p16) ldf8 alo[0]=[aptr],8 // *(aptr++) (p18) xma.hu ahi[0]=alo[2],bi,ahi[1] (p40) add n[2]=n[2],a[2] } // (p23) { .mfi; (p16) nop.m 0 (p18) xma.lu alo[2]=alo[2],bi,ahi[1] (p42) add n[2]=n[2],a[2],1 };; // (p23) { .mfi; (p21) getf.sig a[0]=alo[5] (p16) nop.f 0 (p40) cmp.ltu p41,p39=n[2],a[2] } // (p23) { .mfi; (p21) ld8 t[0]=[tptr],8 (p16) nop.f 0 (p42) cmp.leu p41,p39=n[2],a[2] };; // (p23) { .mfi; (p18) ldf8 nlo[0]=[nptr],8 // *(nptr++) (p20) xma.hu nhi[0]=nlo[2],m0,nhi[1] (p30) add a[1]=a[1],t[1] } // (p22) { .mfi; (p16) nop.m 0 (p20) xma.lu nlo[2]=nlo[2],m0,nhi[1] (p32) add a[1]=a[1],t[1],1 };; // (p22) { .mmi; (p21) getf.sig n[0]=nlo[3] (p16) nop.m 0 (p30) cmp.ltu p31,p29=a[1],t[1] } // (p22) { .mmb; (p23) st8 [tp_1]=n[2],8 (p32) cmp.leu p31,p29=a[1],t[1] // (p22) br.ctop.sptk .Linner_ctop };; .Linner_cend: { .mmi; getf.sig a[0]=ahi[6] // (p24) getf.sig n[0]=nhi[4] nop.i 0 };; { .mmi; .pred.rel "mutex",p31,p33 (p31) add a[0]=a[0],topbit (p33) add a[0]=a[0],topbit,1 mov topbit=r0 };; { .mfi; .pred.rel "mutex",p31,p33 (p31) cmp.ltu p32,p30=a[0],topbit (p33) cmp.leu p32,p30=a[0],topbit } { .mfi; .pred.rel "mutex",p40,p42 (p40) add n[0]=n[0],a[0] (p42) add n[0]=n[0],a[0],1 };; { .mmi; .pred.rel "mutex",p44,p46 (p40) cmp.ltu p41,p39=n[0],a[0] (p42) cmp.leu p41,p39=n[0],a[0] (p32) add topbit=r0,r0,1 } { .mmi; st8 [tp_1]=n[0],8 cmp4.ne p6,p0=1,num sub aptr=aptr,len };; // rewind { .mmi; sub nptr=nptr,len (p41) add topbit=r0,r0,1 add tptr=16,sp } { .mmb; add tp_1=8,sp add num=-1,num // num-- (p6) br.cond.sptk.many .Louter };; { .mbb; add lc=4,lc brp.loop.imp .Lsub_ctop,.Lsub_cend-16 clrrrb.pr };; { .mii; nop.m 0 mov pr.rot=0x10001<<16 // ------^---- (p33) at first (p17) mov ar.lc=lc } { .mii; nop.m 0 mov ar.ec=3 nop.i 0 };; .Lsub_ctop: .pred.rel "mutex",p33,p35 { .mfi; (p16) ld8 t[0]=[tptr],8 // t=*(tp++) (p16) nop.f 0 (p33) sub n[1]=t[1],n[1] } // (p17) { .mfi; (p16) ld8 n[0]=[nptr],8 // n=*(np++) (p16) nop.f 0 (p35) sub n[1]=t[1],n[1],1 };; // (p17) { .mib; (p18) st8 [rptr]=n[2],8 // *(rp++)=r (p33) cmp.gtu p34,p32=n[1],t[1] // (p17) (p18) nop.b 0 } { .mib; (p18) nop.m 0 (p35) cmp.geu p34,p32=n[1],t[1] // (p17) br.ctop.sptk .Lsub_ctop };; .Lsub_cend: { .mmb; .pred.rel "mutex",p34,p36 (p34) sub topbit=topbit,r0 // (p19) (p36) sub topbit=topbit,r0,1 brp.loop.imp .Lcopy_ctop,.Lcopy_cend-16 } { .mmb; sub rptr=rptr,len // rewind sub tptr=tptr,len clrrrb.pr };; { .mmi; and aptr=tptr,topbit andcm bptr=rptr,topbit mov pr.rot=1<<16 };; { .mii; or nptr=aptr,bptr mov ar.lc=lc mov ar.ec=3 };; .Lcopy_ctop: { .mmb; (p16) ld8 n[0]=[nptr],8 (p18) st8 [tptr]=r0,8 (p16) nop.b 0 } { .mmb; (p16) nop.m 0 (p18) st8 [rptr]=n[2],8 br.ctop.sptk .Lcopy_ctop };; .Lcopy_cend: { .mmi; mov ret0=1 // signal "handled" rum 1<<5 // clear um.mfh mov ar.lc=prevlc } { .mib; .restore sp mov sp=prevsp mov pr=prevpr,0x1ffff br.ret.sptk.many b0 };; .endp bn_mul_mont_general# a1=r16; a2=r17; a3=r18; a4=r19; a5=r20; a6=r21; a7=r22; a8=r23; n1=r24; n2=r25; n3=r26; n4=r27; n5=r28; n6=r29; n7=r30; n8=r31; t0=r15; ai0=f8; ai1=f9; ai2=f10; ai3=f11; ai4=f12; ai5=f13; ai6=f14; ai7=f15; ni0=f16; ni1=f17; ni2=f18; ni3=f19; ni4=f20; ni5=f21; ni6=f22; ni7=f23; .align 64 .skip 48 // aligns loop body .local bn_mul_mont_8# .proc bn_mul_mont_8# bn_mul_mont_8: .prologue { .mmi; .save ar.pfs,prevfs alloc prevfs=ar.pfs,6,2,0,8 .vframe prevsp mov prevsp=sp .save ar.lc,prevlc mov prevlc=ar.lc } { .mmi; add r17=-6*16,sp add sp=-7*16,sp .save pr,prevpr mov prevpr=pr };; { .mmi; .save.gf 0,0x10 stf.spill [sp]=f16,-16 .save.gf 0,0x20 stf.spill [r17]=f17,32 add r16=-5*16,prevsp};; { .mmi; .save.gf 0,0x40 stf.spill [r16]=f18,32 .save.gf 0,0x80 stf.spill [r17]=f19,32 $ADDP aptr=0,in1 };; { .mmi; .save.gf 0,0x100 stf.spill [r16]=f20,32 .save.gf 0,0x200 stf.spill [r17]=f21,32 $ADDP r29=8,in1 };; { .mmi; .save.gf 0,0x400 stf.spill [r16]=f22 .save.gf 0,0x800 stf.spill [r17]=f23 $ADDP rptr=0,in0 };; .body .rotf bj[8],mj[2],tf[2],alo[10],ahi[10],nlo[10],nhi[10] .rotr t[8] // load input vectors padding them to 8 elements { .mmi; ldf8 ai0=[aptr],16 // ap[0] ldf8 ai1=[r29],16 // ap[1] $ADDP bptr=0,in2 } { .mmi; $ADDP r30=8,in2 $ADDP nptr=0,in3 $ADDP r31=8,in3 };; { .mmi; ldf8 bj[7]=[bptr],16 // bp[0] ldf8 bj[6]=[r30],16 // bp[1] cmp4.le p4,p5=3,in5 } { .mmi; ldf8 ni0=[nptr],16 // np[0] ldf8 ni1=[r31],16 // np[1] cmp4.le p6,p7=4,in5 };; { .mfi; (p4)ldf8 ai2=[aptr],16 // ap[2] (p5)fcvt.fxu ai2=f0 cmp4.le p8,p9=5,in5 } { .mfi; (p6)ldf8 ai3=[r29],16 // ap[3] (p7)fcvt.fxu ai3=f0 cmp4.le p10,p11=6,in5 } { .mfi; (p4)ldf8 bj[5]=[bptr],16 // bp[2] (p5)fcvt.fxu bj[5]=f0 cmp4.le p12,p13=7,in5 } { .mfi; (p6)ldf8 bj[4]=[r30],16 // bp[3] (p7)fcvt.fxu bj[4]=f0 cmp4.le p14,p15=8,in5 } { .mfi; (p4)ldf8 ni2=[nptr],16 // np[2] (p5)fcvt.fxu ni2=f0 addp4 r28=-1,in5 } { .mfi; (p6)ldf8 ni3=[r31],16 // np[3] (p7)fcvt.fxu ni3=f0 $ADDP in4=0,in4 };; { .mfi; ldf8 n0=[in4] fcvt.fxu tf[1]=f0 nop.i 0 } { .mfi; (p8)ldf8 ai4=[aptr],16 // ap[4] (p9)fcvt.fxu ai4=f0 mov t[0]=r0 } { .mfi; (p10)ldf8 ai5=[r29],16 // ap[5] (p11)fcvt.fxu ai5=f0 mov t[1]=r0 } { .mfi; (p8)ldf8 bj[3]=[bptr],16 // bp[4] (p9)fcvt.fxu bj[3]=f0 mov t[2]=r0 } { .mfi; (p10)ldf8 bj[2]=[r30],16 // bp[5] (p11)fcvt.fxu bj[2]=f0 mov t[3]=r0 } { .mfi; (p8)ldf8 ni4=[nptr],16 // np[4] (p9)fcvt.fxu ni4=f0 mov t[4]=r0 } { .mfi; (p10)ldf8 ni5=[r31],16 // np[5] (p11)fcvt.fxu ni5=f0 mov t[5]=r0 };; { .mfi; (p12)ldf8 ai6=[aptr],16 // ap[6] (p13)fcvt.fxu ai6=f0 mov t[6]=r0 } { .mfi; (p14)ldf8 ai7=[r29],16 // ap[7] (p15)fcvt.fxu ai7=f0 mov t[7]=r0 } { .mfi; (p12)ldf8 bj[1]=[bptr],16 // bp[6] (p13)fcvt.fxu bj[1]=f0 mov ar.lc=r28 } { .mfi; (p14)ldf8 bj[0]=[r30],16 // bp[7] (p15)fcvt.fxu bj[0]=f0 mov ar.ec=1 } { .mfi; (p12)ldf8 ni6=[nptr],16 // np[6] (p13)fcvt.fxu ni6=f0 mov pr.rot=1<<16 } { .mfb; (p14)ldf8 ni7=[r31],16 // np[7] (p15)fcvt.fxu ni7=f0 brp.loop.imp .Louter_8_ctop,.Louter_8_cend-16 };; // The loop is scheduled for 32*n ticks on Itanium 2. Actual attempt // to measure with help of Interval Time Counter indicated that the // factor is a tad higher: 33 or 34, if not 35. Exact measurement and // addressing the issue is problematic, because I don't have access // to platform-specific instruction-level profiler. On Itanium it // should run in 56*n ticks, because of higher xma latency... .Louter_8_ctop: .pred.rel "mutex",p40,p42 .pred.rel "mutex",p48,p50 { .mfi; (p16) nop.m 0 // 0: (p16) xma.hu ahi[0]=ai0,bj[7],tf[1] // ap[0]*b[i]+t[0] (p40) add a3=a3,n3 } // (p17) a3+=n3 { .mfi; (p42) add a3=a3,n3,1 (p16) xma.lu alo[0]=ai0,bj[7],tf[1] (p16) nop.i 0 };; { .mii; (p17) getf.sig a7=alo[8] // 1: (p48) add t[6]=t[6],a3 // (p17) t[6]+=a3 (p50) add t[6]=t[6],a3,1 };; { .mfi; (p17) getf.sig a8=ahi[8] // 2: (p17) xma.hu nhi[7]=ni6,mj[1],nhi[6] // np[6]*m0 (p40) cmp.ltu p43,p41=a3,n3 } { .mfi; (p42) cmp.leu p43,p41=a3,n3 (p17) xma.lu nlo[7]=ni6,mj[1],nhi[6] (p16) nop.i 0 };; { .mii; (p17) getf.sig n5=nlo[6] // 3: (p48) cmp.ltu p51,p49=t[6],a3 (p50) cmp.leu p51,p49=t[6],a3 };; .pred.rel "mutex",p41,p43 .pred.rel "mutex",p49,p51 { .mfi; (p16) nop.m 0 // 4: (p16) xma.hu ahi[1]=ai1,bj[7],ahi[0] // ap[1]*b[i] (p41) add a4=a4,n4 } // (p17) a4+=n4 { .mfi; (p43) add a4=a4,n4,1 (p16) xma.lu alo[1]=ai1,bj[7],ahi[0] (p16) nop.i 0 };; { .mfi; (p49) add t[5]=t[5],a4 // 5: (p17) t[5]+=a4 (p16) xmpy.lu mj[0]=alo[0],n0 // (ap[0]*b[i]+t[0])*n0 (p51) add t[5]=t[5],a4,1 };; { .mfi; (p16) nop.m 0 // 6: (p17) xma.hu nhi[8]=ni7,mj[1],nhi[7] // np[7]*m0 (p41) cmp.ltu p42,p40=a4,n4 } { .mfi; (p43) cmp.leu p42,p40=a4,n4 (p17) xma.lu nlo[8]=ni7,mj[1],nhi[7] (p16) nop.i 0 };; { .mii; (p17) getf.sig n6=nlo[7] // 7: (p49) cmp.ltu p50,p48=t[5],a4 (p51) cmp.leu p50,p48=t[5],a4 };; .pred.rel "mutex",p40,p42 .pred.rel "mutex",p48,p50 { .mfi; (p16) nop.m 0 // 8: (p16) xma.hu ahi[2]=ai2,bj[7],ahi[1] // ap[2]*b[i] (p40) add a5=a5,n5 } // (p17) a5+=n5 { .mfi; (p42) add a5=a5,n5,1 (p16) xma.lu alo[2]=ai2,bj[7],ahi[1] (p16) nop.i 0 };; { .mii; (p16) getf.sig a1=alo[1] // 9: (p48) add t[4]=t[4],a5 // p(17) t[4]+=a5 (p50) add t[4]=t[4],a5,1 };; { .mfi; (p16) nop.m 0 // 10: (p16) xma.hu nhi[0]=ni0,mj[0],alo[0] // np[0]*m0 (p40) cmp.ltu p43,p41=a5,n5 } { .mfi; (p42) cmp.leu p43,p41=a5,n5 (p16) xma.lu nlo[0]=ni0,mj[0],alo[0] (p16) nop.i 0 };; { .mii; (p17) getf.sig n7=nlo[8] // 11: (p48) cmp.ltu p51,p49=t[4],a5 (p50) cmp.leu p51,p49=t[4],a5 };; .pred.rel "mutex",p41,p43 .pred.rel "mutex",p49,p51 { .mfi; (p17) getf.sig n8=nhi[8] // 12: (p16) xma.hu ahi[3]=ai3,bj[7],ahi[2] // ap[3]*b[i] (p41) add a6=a6,n6 } // (p17) a6+=n6 { .mfi; (p43) add a6=a6,n6,1 (p16) xma.lu alo[3]=ai3,bj[7],ahi[2] (p16) nop.i 0 };; { .mii; (p16) getf.sig a2=alo[2] // 13: (p49) add t[3]=t[3],a6 // (p17) t[3]+=a6 (p51) add t[3]=t[3],a6,1 };; { .mfi; (p16) nop.m 0 // 14: (p16) xma.hu nhi[1]=ni1,mj[0],nhi[0] // np[1]*m0 (p41) cmp.ltu p42,p40=a6,n6 } { .mfi; (p43) cmp.leu p42,p40=a6,n6 (p16) xma.lu nlo[1]=ni1,mj[0],nhi[0] (p16) nop.i 0 };; { .mii; (p16) nop.m 0 // 15: (p49) cmp.ltu p50,p48=t[3],a6 (p51) cmp.leu p50,p48=t[3],a6 };; .pred.rel "mutex",p40,p42 .pred.rel "mutex",p48,p50 { .mfi; (p16) nop.m 0 // 16: (p16) xma.hu ahi[4]=ai4,bj[7],ahi[3] // ap[4]*b[i] (p40) add a7=a7,n7 } // (p17) a7+=n7 { .mfi; (p42) add a7=a7,n7,1 (p16) xma.lu alo[4]=ai4,bj[7],ahi[3] (p16) nop.i 0 };; { .mii; (p16) getf.sig a3=alo[3] // 17: (p48) add t[2]=t[2],a7 // (p17) t[2]+=a7 (p50) add t[2]=t[2],a7,1 };; { .mfi; (p16) nop.m 0 // 18: (p16) xma.hu nhi[2]=ni2,mj[0],nhi[1] // np[2]*m0 (p40) cmp.ltu p43,p41=a7,n7 } { .mfi; (p42) cmp.leu p43,p41=a7,n7 (p16) xma.lu nlo[2]=ni2,mj[0],nhi[1] (p16) nop.i 0 };; { .mii; (p16) getf.sig n1=nlo[1] // 19: (p48) cmp.ltu p51,p49=t[2],a7 (p50) cmp.leu p51,p49=t[2],a7 };; .pred.rel "mutex",p41,p43 .pred.rel "mutex",p49,p51 { .mfi; (p16) nop.m 0 // 20: (p16) xma.hu ahi[5]=ai5,bj[7],ahi[4] // ap[5]*b[i] (p41) add a8=a8,n8 } // (p17) a8+=n8 { .mfi; (p43) add a8=a8,n8,1 (p16) xma.lu alo[5]=ai5,bj[7],ahi[4] (p16) nop.i 0 };; { .mii; (p16) getf.sig a4=alo[4] // 21: (p49) add t[1]=t[1],a8 // (p17) t[1]+=a8 (p51) add t[1]=t[1],a8,1 };; { .mfi; (p16) nop.m 0 // 22: (p16) xma.hu nhi[3]=ni3,mj[0],nhi[2] // np[3]*m0 (p41) cmp.ltu p42,p40=a8,n8 } { .mfi; (p43) cmp.leu p42,p40=a8,n8 (p16) xma.lu nlo[3]=ni3,mj[0],nhi[2] (p16) nop.i 0 };; { .mii; (p16) getf.sig n2=nlo[2] // 23: (p49) cmp.ltu p50,p48=t[1],a8 (p51) cmp.leu p50,p48=t[1],a8 };; { .mfi; (p16) nop.m 0 // 24: (p16) xma.hu ahi[6]=ai6,bj[7],ahi[5] // ap[6]*b[i] (p16) add a1=a1,n1 } // (p16) a1+=n1 { .mfi; (p16) nop.m 0 (p16) xma.lu alo[6]=ai6,bj[7],ahi[5] (p17) mov t[0]=r0 };; { .mii; (p16) getf.sig a5=alo[5] // 25: (p16) add t0=t[7],a1 // (p16) t[7]+=a1 (p42) add t[0]=t[0],r0,1 };; { .mfi; (p16) setf.sig tf[0]=t0 // 26: (p16) xma.hu nhi[4]=ni4,mj[0],nhi[3] // np[4]*m0 (p50) add t[0]=t[0],r0,1 } { .mfi; (p16) cmp.ltu.unc p42,p40=a1,n1 (p16) xma.lu nlo[4]=ni4,mj[0],nhi[3] (p16) nop.i 0 };; { .mii; (p16) getf.sig n3=nlo[3] // 27: (p16) cmp.ltu.unc p50,p48=t0,a1 (p16) nop.i 0 };; .pred.rel "mutex",p40,p42 .pred.rel "mutex",p48,p50 { .mfi; (p16) nop.m 0 // 28: (p16) xma.hu ahi[7]=ai7,bj[7],ahi[6] // ap[7]*b[i] (p40) add a2=a2,n2 } // (p16) a2+=n2 { .mfi; (p42) add a2=a2,n2,1 (p16) xma.lu alo[7]=ai7,bj[7],ahi[6] (p16) nop.i 0 };; { .mii; (p16) getf.sig a6=alo[6] // 29: (p48) add t[6]=t[6],a2 // (p16) t[6]+=a2 (p50) add t[6]=t[6],a2,1 };; { .mfi; (p16) nop.m 0 // 30: (p16) xma.hu nhi[5]=ni5,mj[0],nhi[4] // np[5]*m0 (p40) cmp.ltu p41,p39=a2,n2 } { .mfi; (p42) cmp.leu p41,p39=a2,n2 (p16) xma.lu nlo[5]=ni5,mj[0],nhi[4] (p16) nop.i 0 };; { .mfi; (p16) getf.sig n4=nlo[4] // 31: (p16) nop.f 0 (p48) cmp.ltu p49,p47=t[6],a2 } { .mfb; (p50) cmp.leu p49,p47=t[6],a2 (p16) nop.f 0 br.ctop.sptk.many .Louter_8_ctop };; .Louter_8_cend: // above loop has to execute one more time, without (p16), which is // replaced with merged move of np[8] to GPR bank .pred.rel "mutex",p40,p42 .pred.rel "mutex",p48,p50 { .mmi; (p0) getf.sig n1=ni0 // 0: (p40) add a3=a3,n3 // (p17) a3+=n3 (p42) add a3=a3,n3,1 };; { .mii; (p17) getf.sig a7=alo[8] // 1: (p48) add t[6]=t[6],a3 // (p17) t[6]+=a3 (p50) add t[6]=t[6],a3,1 };; { .mfi; (p17) getf.sig a8=ahi[8] // 2: (p17) xma.hu nhi[7]=ni6,mj[1],nhi[6] // np[6]*m0 (p40) cmp.ltu p43,p41=a3,n3 } { .mfi; (p42) cmp.leu p43,p41=a3,n3 (p17) xma.lu nlo[7]=ni6,mj[1],nhi[6] (p0) nop.i 0 };; { .mii; (p17) getf.sig n5=nlo[6] // 3: (p48) cmp.ltu p51,p49=t[6],a3 (p50) cmp.leu p51,p49=t[6],a3 };; .pred.rel "mutex",p41,p43 .pred.rel "mutex",p49,p51 { .mmi; (p0) getf.sig n2=ni1 // 4: (p41) add a4=a4,n4 // (p17) a4+=n4 (p43) add a4=a4,n4,1 };; { .mfi; (p49) add t[5]=t[5],a4 // 5: (p17) t[5]+=a4 (p0) nop.f 0 (p51) add t[5]=t[5],a4,1 };; { .mfi; (p0) getf.sig n3=ni2 // 6: (p17) xma.hu nhi[8]=ni7,mj[1],nhi[7] // np[7]*m0 (p41) cmp.ltu p42,p40=a4,n4 } { .mfi; (p43) cmp.leu p42,p40=a4,n4 (p17) xma.lu nlo[8]=ni7,mj[1],nhi[7] (p0) nop.i 0 };; { .mii; (p17) getf.sig n6=nlo[7] // 7: (p49) cmp.ltu p50,p48=t[5],a4 (p51) cmp.leu p50,p48=t[5],a4 };; .pred.rel "mutex",p40,p42 .pred.rel "mutex",p48,p50 { .mii; (p0) getf.sig n4=ni3 // 8: (p40) add a5=a5,n5 // (p17) a5+=n5 (p42) add a5=a5,n5,1 };; { .mii; (p0) nop.m 0 // 9: (p48) add t[4]=t[4],a5 // p(17) t[4]+=a5 (p50) add t[4]=t[4],a5,1 };; { .mii; (p0) nop.m 0 // 10: (p40) cmp.ltu p43,p41=a5,n5 (p42) cmp.leu p43,p41=a5,n5 };; { .mii; (p17) getf.sig n7=nlo[8] // 11: (p48) cmp.ltu p51,p49=t[4],a5 (p50) cmp.leu p51,p49=t[4],a5 };; .pred.rel "mutex",p41,p43 .pred.rel "mutex",p49,p51 { .mii; (p17) getf.sig n8=nhi[8] // 12: (p41) add a6=a6,n6 // (p17) a6+=n6 (p43) add a6=a6,n6,1 };; { .mii; (p0) getf.sig n5=ni4 // 13: (p49) add t[3]=t[3],a6 // (p17) t[3]+=a6 (p51) add t[3]=t[3],a6,1 };; { .mii; (p0) nop.m 0 // 14: (p41) cmp.ltu p42,p40=a6,n6 (p43) cmp.leu p42,p40=a6,n6 };; { .mii; (p0) getf.sig n6=ni5 // 15: (p49) cmp.ltu p50,p48=t[3],a6 (p51) cmp.leu p50,p48=t[3],a6 };; .pred.rel "mutex",p40,p42 .pred.rel "mutex",p48,p50 { .mii; (p0) nop.m 0 // 16: (p40) add a7=a7,n7 // (p17) a7+=n7 (p42) add a7=a7,n7,1 };; { .mii; (p0) nop.m 0 // 17: (p48) add t[2]=t[2],a7 // (p17) t[2]+=a7 (p50) add t[2]=t[2],a7,1 };; { .mii; (p0) nop.m 0 // 18: (p40) cmp.ltu p43,p41=a7,n7 (p42) cmp.leu p43,p41=a7,n7 };; { .mii; (p0) getf.sig n7=ni6 // 19: (p48) cmp.ltu p51,p49=t[2],a7 (p50) cmp.leu p51,p49=t[2],a7 };; .pred.rel "mutex",p41,p43 .pred.rel "mutex",p49,p51 { .mii; (p0) nop.m 0 // 20: (p41) add a8=a8,n8 // (p17) a8+=n8 (p43) add a8=a8,n8,1 };; { .mmi; (p0) nop.m 0 // 21: (p49) add t[1]=t[1],a8 // (p17) t[1]+=a8 (p51) add t[1]=t[1],a8,1 } { .mmi; (p17) mov t[0]=r0 (p41) cmp.ltu p42,p40=a8,n8 (p43) cmp.leu p42,p40=a8,n8 };; { .mmi; (p0) getf.sig n8=ni7 // 22: (p49) cmp.ltu p50,p48=t[1],a8 (p51) cmp.leu p50,p48=t[1],a8 } { .mmi; (p42) add t[0]=t[0],r0,1 (p0) add r16=-7*16,prevsp (p0) add r17=-6*16,prevsp };; // subtract np[8] from carrybit|tmp[8] // carrybit|tmp[8] layout upon exit from above loop is: // t[0]|t[1]|t[2]|t[3]|t[4]|t[5]|t[6]|t[7]|t0 (least significant) { .mmi; (p50)add t[0]=t[0],r0,1 add r18=-5*16,prevsp sub n1=t0,n1 };; { .mmi; cmp.gtu p34,p32=n1,t0;; .pred.rel "mutex",p32,p34 (p32)sub n2=t[7],n2 (p34)sub n2=t[7],n2,1 };; { .mii; (p32)cmp.gtu p35,p33=n2,t[7] (p34)cmp.geu p35,p33=n2,t[7];; .pred.rel "mutex",p33,p35 (p33)sub n3=t[6],n3 } { .mmi; (p35)sub n3=t[6],n3,1;; (p33)cmp.gtu p34,p32=n3,t[6] (p35)cmp.geu p34,p32=n3,t[6] };; .pred.rel "mutex",p32,p34 { .mii; (p32)sub n4=t[5],n4 (p34)sub n4=t[5],n4,1;; (p32)cmp.gtu p35,p33=n4,t[5] } { .mmi; (p34)cmp.geu p35,p33=n4,t[5];; .pred.rel "mutex",p33,p35 (p33)sub n5=t[4],n5 (p35)sub n5=t[4],n5,1 };; { .mii; (p33)cmp.gtu p34,p32=n5,t[4] (p35)cmp.geu p34,p32=n5,t[4];; .pred.rel "mutex",p32,p34 (p32)sub n6=t[3],n6 } { .mmi; (p34)sub n6=t[3],n6,1;; (p32)cmp.gtu p35,p33=n6,t[3] (p34)cmp.geu p35,p33=n6,t[3] };; .pred.rel "mutex",p33,p35 { .mii; (p33)sub n7=t[2],n7 (p35)sub n7=t[2],n7,1;; (p33)cmp.gtu p34,p32=n7,t[2] } { .mmi; (p35)cmp.geu p34,p32=n7,t[2];; .pred.rel "mutex",p32,p34 (p32)sub n8=t[1],n8 (p34)sub n8=t[1],n8,1 };; { .mii; (p32)cmp.gtu p35,p33=n8,t[1] (p34)cmp.geu p35,p33=n8,t[1];; .pred.rel "mutex",p33,p35 (p33)sub a8=t[0],r0 } { .mmi; (p35)sub a8=t[0],r0,1;; (p33)cmp.gtu p34,p32=a8,t[0] (p35)cmp.geu p34,p32=a8,t[0] };; // save the result, either tmp[num] or tmp[num]-np[num] .pred.rel "mutex",p32,p34 { .mmi; (p32)st8 [rptr]=n1,8 (p34)st8 [rptr]=t0,8 add r19=-4*16,prevsp};; { .mmb; (p32)st8 [rptr]=n2,8 (p34)st8 [rptr]=t[7],8 (p5)br.cond.dpnt.few .Ldone };; { .mmb; (p32)st8 [rptr]=n3,8 (p34)st8 [rptr]=t[6],8 (p7)br.cond.dpnt.few .Ldone };; { .mmb; (p32)st8 [rptr]=n4,8 (p34)st8 [rptr]=t[5],8 (p9)br.cond.dpnt.few .Ldone };; { .mmb; (p32)st8 [rptr]=n5,8 (p34)st8 [rptr]=t[4],8 (p11)br.cond.dpnt.few .Ldone };; { .mmb; (p32)st8 [rptr]=n6,8 (p34)st8 [rptr]=t[3],8 (p13)br.cond.dpnt.few .Ldone };; { .mmb; (p32)st8 [rptr]=n7,8 (p34)st8 [rptr]=t[2],8 (p15)br.cond.dpnt.few .Ldone };; { .mmb; (p32)st8 [rptr]=n8,8 (p34)st8 [rptr]=t[1],8 nop.b 0 };; .Ldone: // epilogue { .mmi; ldf.fill f16=[r16],64 ldf.fill f17=[r17],64 nop.i 0 } { .mmi; ldf.fill f18=[r18],64 ldf.fill f19=[r19],64 mov pr=prevpr,0x1ffff };; { .mmi; ldf.fill f20=[r16] ldf.fill f21=[r17] mov ar.lc=prevlc } { .mmi; ldf.fill f22=[r18] ldf.fill f23=[r19] mov ret0=1 } // signal "handled" { .mib; rum 1<<5 .restore sp mov sp=prevsp br.ret.sptk.many b0 };; .endp bn_mul_mont_8# .type copyright#,\@object copyright: stringz "Montgomery multiplication for IA-64, CRYPTOGAMS by <appro\@openssl.org>" ___ $output=shift and open STDOUT,">$output"; print $code; close STDOUT;