Age | Commit message (Collapse) | Author |
|
Makes the API for forces and impulses more flexible, easier to
understand and harmonized between 2D and 3D.
Rigid bodies now have 3 sets of methods for forces and impulses:
-apply_impulse() for impulses (one-shot and time independent)
-apply_force() for forces (time dependent) applied for the current step
-add_constant_force() for forces that keeps being applied each step
Also updated the documentation to clarify the different methods and
parameters in rigid body nodes, body direct state and physics servers.
|
|
Clarified space parameters for contacts and added missing ones.
List of changes:
-Add contact bias to space parameters
-Add solver iterations to space parameters, instead of a specific
physics server function
-Renamed BODY_MAX_ALLOWED_PENETRATION to CONTACT_MAX_ALLOWED_PENETRATION
to make it consistent with other contact parameters
|
|
Separate space override modes for gravity/damping in Area
|
|
Makes the results consistent for all shape types with options to set
the desired behavior.
|
|
Also make inspector clearer for gravity point properties.
|
|
Expose local center of mass in physics servers
|
|
Center of mass in body's local space is more useful than the transformed
one in some cases, like drawing its position for debug.
It's especially useful to get the generated local center of mass when
in auto mode (by default).
Physics Server BODY_PARAM_CENTER_OF_MASS:
Now always returns the local center of mass, instead of setting a local
center of mass and getting a transformed one.
This causes compatibility breaking, but it makes more sense for the
parameter to be consistent between getter and setter.
Direct Body State:
There are now two properties, because both of them can be useful in
different situations.
center_of_mass: relative position in global coordinates (same as before)
center_of_mass_local: position in local coordinates
|
|
Same as what is already done for shape queries, applied to point and ray
queries. Easier to document and more flexible to add more parameters.
Also expose intersect_point method to script in 3D.
Remove intersect_point_on_canvas in 2D, replaced with a parameter.
|
|
|
|
Damping values are now non-negative.
Add new properties linear_damp_mode and angular_damp_mode to set the way
RigidDynamicBody and PhysicalBone (2D & 3D) use damping values.
It can now be Combine (default) to add to the default/areas, or Replace
to override the value completely (current behavior).
|
|
While at it, tweak some boolean setters to use `p_enabled` for the bool.
Also renames `draw_minimap()` to `set_draw_minimap()`.
|
|
Added a parameter in test_body_motion to exclude attached objects from
collision, used to avoid collision with all TileMap tiles with moving
platform motion instead of just the one tile the character touches.
Same changes made in 3D for consistency, and handling potential similar
cases.
|
|
-Physics servers test body motion use a class to hold parameters instead
of multiple arguments to make it more readable and flexible since there
are many options
-Improved documentation for test body motion and kinematic collision
-Removed read-only properties for body motion results (not handled in
scripts, so they should be get_ methods only instead)
|
|
|
|
Shape metadata was only used to get tile information when colliding with
tilemaps. It's not needed anymore since there's an API in tilemap using
body ids instead.
|
|
Clarify RigidDynamicBody modes
|
|
Allows 2D character controller to work without applying gravity when
touching the ground (also more safely in 3D), and collision detection
is more flexible with different safe margin values.
Character body motion changes in 2D and 3D:
-Recovery only for depth > min contact depth to help with collision
detection consistency (rest info could be lost if recovery was too much)
-Adaptive min contact depth (based on margin) instead of space parameter
Extra CharacterBody changes:
-2D: apply changes made in 3D for stop on slope and floor snap that help
fixing some jittering cases
-3D: fix minor inconsistencies in stop on slope and floor snap logic
|
|
RigidDynamicBody modes are replaced with several properties to make their
usage clearer:
-lock_rotation: disable body's rotation (instead of MODE_LOCKED)
-freeze: no gravity or forces (instead of MODE_STATIC and MODE_KINEMATIC)
-freeze_mode: Static (can be only teleported) or Kinematic (can be animated)
Also renamed MODE_DYNAMIC_LOCKED to MODE_DYNAMIC_LINEAR in the physics
servers.
|
|
|
|
Changes:
-Added support for custom inertia and center of mass in 3D
-Added support for custom center of mass in 2D
-Calculated center of mass from shapes in 2D (same as in 3D)
-Fixed mass properties calculation with disabled shapes in 2D/3D
-Removed first_integration which is not used in 2D and doesn't seem to
make a lot of sense (prevents omit_force_integration to work during the
first frame)
-Support for custom inertia on different axes for RigidBody3D
|
|
The default mask for queries was 0, 0x7FFFFFFF or 0xFFFFFFFF depending
on the cases.
Now always using 0xFFFFFFFF (in the form of UINT32_MAX to make it clear)
in order to use all layers by default.
|
|
Makes it clearer that it's used for special cases when picking a
collision shape.
|
|
Make separation ray shapes work properly in move_and_slide, wihtout the
specific code in CharacterBody like before.
Now most of the logic is handled inside the physics server. The only
thing that's needed is to use ray shapes only for recovery and ignore
them when performing the motion itself (unless we're snapping or slips
on slope is on).
|
|
Partial revert from previously removing ray shapes completely, added
back as a shape type but without the specific character controller code.
|
|
Changes:
- Rename few methods/property and group them in the editor when it's possible
- Make MotionResult API consistency with KinematicCollision
- Return a boolean in move_and_slide if there was a collision
- New methods:
- get_floor_angle on CharacterBody to get the floor angle.
- get_angle on KinematicCollision to get the collision angle.
- get_last_slide_collision to quickly get the latest collision of move_and_slide.
|
|
The new name makes it more obvious that it acts as an infinite plane,
and is consistent with its 3D counterpart (WorldMarginShape3D).
|
|
- Back to 1-based layer names to make it clearer in editor UI
- Layer bit accessors are renamed to layer value and 1-based too
- Uniform errors and documentation in render and physics
- Fix a few remaining collision_layer used in place of collision_mask
|
|
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
|
|
When synchronizing CharacterBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
|
|
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
|
|
|
|
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
|
|
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
|
|
PhysicsBody now has methods move_and_collide/test_move and needed
properties for these methods: safe margin, locked axes (3D only).
Moved collision_exceptions from StaticBody to PhysicsBody for 3D
(same as 2D, and conforms to documentation).
RigidBody doesn't have test_motion method anymore, it's now redundant
with PhysicsBody.test_move.
|
|
This allows fine-tuning of collision iterations for more
accurate collision physics with a performance cost.
|
|
|
|
Removed _direct_state_changed bindings
Affects 2D and 3D nodes
Callbacks now use Callable
Tests were changed accordingly
|
|
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
|
|
|
|
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
|
|
The underscore prefix was used to avoid the conflict between the `RID` class
name and the matching enum value in `Variant::Type`.
This can be fixed differently by prefixing uses of the `RID` class in `Variant`
with the scope resolution operator, as done already for `AABB`.
|
|
-Removed FuncRef, since Callable makes it obsolete
-Removed int_types.h as its obsolete in c++11+
-Changed color names code
|
|
Removed make_binders and the old style generated binders.
|
|
|
|
Refactor physics force and impulse code to use (force, position) order
|
|
Co-authored-by: PouleyKetchoupp <pouleyketchoup@gmail.com>
|
|
|
|
|
|
Using clang-tidy's `readability-braces-around-statements`.
https://clang.llvm.org/extra/clang-tidy/checks/readability-braces-around-statements.html
|
|
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
|