| Age | Commit message (Collapse) | Author |
|---|
|
-Enable the trails and set the length in seconds
-Provide a mesh with a skeleton and a skin
-Or, alternatively use one of the built-in TubeTrailMesh/RibbonTrailMesh
-Works deterministically
-Fixed particle collisions (were broken)
-Not working in 2D yet (that will happen next)
|
|
Allow renaming bones and blendshapes.
|
|
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
|
|
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
|
|
|
|
-When importing, a vertex-only version of the mesh is created.
-This version is used when rendering shadows, and improves performance by reducing bandwidth
-It's automatic, but can optionally be used by users, in case they want to make special versions of geometry for shadow casting.
|
|
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
|
|
|
|
|
|
Uses compute shaders, which only once, on demand, and all in parallel.
|
|
-Reworked how meshes are treated by importer by using EditorSceneImporterMesh and EditorSceneImporterMeshNode. Instead of Mesh and MeshInstance, this allows more efficient processing of meshes before they are actually registered in the RenderingServer.
-Integrated MeshOptimizer
-Reworked internals of SurfaceTool to use arrays, making it more performant and easy to run optimizatons on.
|
|
|
|
And fixups:
- Add missing bindings in RenderingServer
- Remove duplicate ArrayMesh enum bindings (they're in Mesh already)
- Remove redundant _unhandled_key_input binding in Control (it's in Node
already)
|
|
-Changed how mesh data is organized, hoping to make it more efficient on Vulkan and GLES.
-Removed compression, it now always uses the most efficient format.
-Added support for custom arrays (up to 8 custom formats)
-Added support for 8 weights in skeleton data.
-Added a simple optional versioning system for imported assets, to reimport if binary is newer
-Fixes #43979 (I needed to test)
WARNING:
-NOT backwards compatible with previous 4.x-devel, will most likely never be, but it will force reimport scenes due to version change.
-NOT backwards compatible with 3.x scenes, this will be eventually re-added.
-Skeletons not working any longer, will fix in next PR.
|
|
|
|
-Removed FuncRef, since Callable makes it obsolete
-Removed int_types.h as its obsolete in c++11+
-Changed color names code
|
|
|
|
The glTF 2.0 spec only makes `mimeType` mandatory for `bufferView` image data,
so the previous logic to handle URIs with base64-encoded images could fail if
`mimeType` is undefined.
The logic was documented and refactored to better handle the spec, notably:
- `uri` and `bufferView` are now mutually exclusive, and only the latter fails
if `mimeType` is undefined.
- `uri` with a file path will now respect the `mimeType` if defined, and thus
attempt loading the file with the specified format (even if its extension is
not the one expected for this format). So we can support bad extensions (PNG
data with `.jpg` extension) or custom ones (PNG data in `.img` file for
example).
- `uri` with base64 encoded data will infer MIME type from `data:image/png` or
`data:image/jpeg` if it was not documented in `mimeType` initially.
- `uri` with base64 encoded data, no `mimeType` and `application/octet-stream`
or `application/gltf-buffer` will fall back to trying both PNG and JPEG
loaders.
Fully fixes #33796 (and fixes up #42501).
|
|
Using clang-tidy's `readability-braces-around-statements`.
https://clang.llvm.org/extra/clang-tidy/checks/readability-braces-around-statements.html
|
|
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
|
|
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
|
|
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
|
|
This reverts commit ec7b481170dcd6a7b4cf0e6c1221e204ff7945f3.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
|
|
|
|
This commit adds caching to the lightmap mesh unwraps generated on
import. This speeds up re-imports of meshes that haven't changed and
also makes sure that the unwraps are consistent across imports.
The unwrapping process is not deterministic, so one could end up with
a different mapping every time the scene was imported, breaking any
previously baked lightmaps. The changes in this commit prevent that
from happening.
|
|
|
|
VisualServer -> RenderingServer
PhysicsServer -> PhysicsServer3D
Physics2DServer -> PhysicsServer2D
NavigationServer -> NavigationServer3D
Navigation2DServer -> NavigationServer2D
Also renamed corresponding files.
|
|
Fixes #30736.
|
|
|
|
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
|
|
Mesh::convex_decompose: Remove unneeded vector copy
|
|
|
|
|
|
|
|
Typed `PoolTypeArray` types are now renamed `PackedTypeArray` and are
sugar for `Vector<Type>`.
|
|
|
|
Lots of internal API changes and some docstrings were lost in the conversion.
I manually salvaged many of them but for all the rendering-related ones, an
additional pass is needed.
Added missing enum bindings in BaseMaterial3D and VisualServer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adds a size check to the array returned by `surface_get_arrays`.
During debugging, `create_outline` also crashes when the indices size is
one (not a multiple of three). For now, just reports the error and fail
the function.
|
|
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
|
|
|
|
|
|
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
|
|
MeshLibrary export improvements
|