summaryrefslogtreecommitdiff
path: root/scene/2d
AgeCommit message (Collapse)Author
2021-06-30Enable Camera2D smoothing on limit changeEric
2021-06-30Merge pull request #49834 from nekomatata/physics-disable-modesRémi Verschelde
Add support for controlling physics nodes' behavior when disabled
2021-06-30Merge pull request #50009 from reduz/fix-suffixes-and-degreesRémi Verschelde
Fix editor suffixes and degrees conversion
2021-06-30Add support for controlling physics nodes' behavior when disabledPouleyKetchoupp
New property disable_mode to set different behaviors: Remove: remove from physics simulation MakeStatic: change body mode to static (doesn't affect area and soft body) KeepActive: do nothing Extra change: Handle disable/enable node state with specific notifications, in order to differentiate global pause from disabled nodes.
2021-06-30Fix editor suffixes and degrees conversionreduz
* Functions to convert to/from degrees are all gone. Conversion is done by the editor. * Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees. * Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m" * In general, can add suffixes for EditorSpinSlider Not covered by this PR, will have to be addressed by future ones: * Ability to switch radians/degrees in the inspector for angle properties (if actually wanted). * Animations previously made will most likely break, need to add a way to make old ones compatible. * Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes. * Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
2021-06-30Merge pull request #49901 from nekomatata/move-and-collide-fix-slideRémi Verschelde
Fix move_and_collide causing sliding on slopes
2021-06-29Merge pull request #49719 from LightningAA/rename-node-is-ancestor-ofRémi Verschelde
Rename `is_a_parent_of()` to `is_ancestor_of()`
2021-06-28Fix move_and_collide causing sliding on slopesPouleyKetchoupp
Make sure the direction of the motion is preserved, unless the depth is higher than the margin, which means the body needs depenetration in any direction. Also changed move_and_slide to avoid sliding on the first motion, in order to avoid issues with unstable position on ground when jumping. Co-authored-by: fabriceci <fabricecipolla@gmail.com>
2021-06-24Fix polygon 2D rendering blackGilles Roudière
2021-06-21Rename `is_a_parent_of()` to `is_ancestor_of()`Lightning_A
2021-06-19Rename `instance()`->`instantiate()` when it's a verbLightning_A
2021-06-18Merge pull request #49475 from nekomatata/kinematic-collision-ridRémi Verschelde
Expose collider RID in 2D/3D kinematic collision
2021-06-17Add PROPERTY_USAGE_NONE and use itAaron Franke
2021-06-16Rename VisibilityNotifierXD to VisibleOnScreenNotifierXDreduz
* Renames for 2D and 3D * Class name was confusing, given both 2D and 3D have a "visible" property that is unrelated to actual on-screen visibility. * New name makes it clear that this is about visibility on screen.
2021-06-16Refactor VisibilityNotifierreduz
* Works from RenderinServer * Accurately tells when on or off-scren, its no longer approximate. * VisibilityEnabler also simplified to use the process mode instead.
2021-06-14Fix crash when using TileMap::fix_invalid_tilesHaoyu Qiu
2021-06-13Merge pull request #49526 from Chaosus/fix_textureregion_errorsRémi Verschelde
2021-06-13Initialize PhysicalBone2D::parent_skeletonHaoyu Qiu
2021-06-12Fixed a bunch of connection errors in TextureEditorPluginYuri Roubinsky
2021-06-11Rename Reference to RefCountedPedro J. Estébanez
2021-06-09Expose collider RID in 2D/3D kinematic collisionPouleyKetchoupp
Can be useful to access the colliding body information for bodies created with the physics server directly.
2021-06-09Merge pull request #49395 from nekomatata/floor-max-angle-degreesRémi Verschelde
Use degrees instead of rad for floor_max_angle property in CharacterBody
2021-06-08Use degrees instead of rad for floor_max_angle property in CharacterBodyPouleyKetchoupp
2021-06-08Merge pull request #49378 from BastiaanOlij/fix_execute_modifications_bindRémi Verschelde
Fixed mistake in binding of Skeleton2D::execute_modifications
2021-06-08Fixed mistake in binding of Skeleton2D::execute_modificationsBastiaan Olij
2021-06-07Merge pull request #49128 from Calinou/improve-position-node-axis-visibilityRémi Verschelde
Improve axis awareness and visibility for Position2D and Position3D
2021-06-05New and improved IK system for Skeleton2DTwistedTwigleg
This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2021-06-05Deleted YSort, moved its functionality directly into Node2D.andriyDev
YSort now has a compatibility alias to Node2D. Updated TileMap to use the existing Node2D y_sort_enabled property instead of its own property. Updated Node2D doc to include the new y_sort_enabled member. Updated TileMap doc to remove its mention of cell_y_sort. Deleted YSort doc.
2021-06-04Linear velocity cleanupPouleyKetchoupp
CharacterBody has a linear_velocity property to replace the argument in move_and_slide. StaticBody handles reporting linear/angular velocity correctly when kinematic motion is used (in 3D, used in vehicle and navigation).
2021-06-04Safe margin cleanupPouleyKetchoupp
Safe margin property on CharacterBody only, used as argument in move_and_collide. Removed kinematic_safe_margin in 3D physics server, not really useful and now harmonized with 2D.
2021-06-04Support for kinematic_motion in StaticBodyPouleyKetchoupp
Does the same thing as simulate motion from RigidBody in Kinematic mode, and CharacterBody (previously KinematicBody). Added support for constant linear/angular velocity with kinematic_motion in StaticBody, which moves the body in physics. Updated documentation for StaticBody and CharacterBody to describe their functionalities more accurately.
2021-06-04More explanatory names for RigidBody modesPouleyKetchoupp
MODE_DYNAMIC instead of MODE_RIGID MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED (MODE_CHARACTER was forcing the body not to sleep, which is redundant with can_sleep and wasn't done in Bullet).
2021-06-04Properties for move_and_slide and remove move_and_slide_with_snapPouleyKetchoupp
- snap property to replace move_and_slide_with_snap() - floor_max_angle, stop_on_slope, infinite_inertia, max_slides, up_direction properties to replace arguments from move_and_slide() - up direction now defaults to Vector3.UP and Vector2.UP
2021-06-04KinematicBody split between new CharacterBody and PhysicsBodyPouleyKetchoupp
PhysicsBody now has methods move_and_collide/test_move and needed properties for these methods: safe margin, locked axes (3D only). Moved collision_exceptions from StaticBody to PhysicsBody for 3D (same as 2D, and conforms to documentation). RigidBody doesn't have test_motion method anymore, it's now redundant with PhysicsBody.test_move.
2021-06-03Rename Transform to Transform3D in coreAaron Franke
2021-06-02Improve axis awareness and visibility for Position2D and Position3DHugo Locurcio
2021-06-01Merge pull request #49024 from groud/restore_tilemap_show_debugRémi Verschelde
Restore TileMap's debug collision shapes and add navigation.
2021-05-27Tweak Camera2D editor line colors for better visibilityHugo Locurcio
The new color for screen drawing was chosen to be easier to distinguish from the 2D viewport limits. This also makes lines less opaque when the Camera2D has the Current property enabled. The increased line width is enough to spot the camera easily, and the increased opacity on top of that felt obnoxious.
2021-05-25Restore a way to show collsion/navigation on TileMap.Gilles Roudière
Also remove an unused function.
2021-05-25Merge pull request #48955 from Calinou/editor-tweak-property-hintsRémi Verschelde
Tweak dozens of editor property hints for consistency
2021-05-25Tweak dozens of editor property hints for consistencyHugo Locurcio
- Update Viewport MSAA property hints to match the currently exposed values. - Add some performance hints to property hints.
2021-05-24Merge pull request #49033 from groud/fix_deprecated_noRémi Verschelde
Fixes deprecated=no compilation option
2021-05-24Fixes deprecated=no compilation optionGilles Roudière
2021-05-24Merge pull request #48894 from reduz/gpu-particles-2d-2Rémi Verschelde
Support for 2D particles to collide against SDF
2021-05-23Support for 2D particles to collide against SDFreduz
-Added SDF collision support for 2D particles -Changed the SDF generation to be fully signed
2021-05-23Change frame_coords to Vector2ikobewi
2021-05-20Implement scenes tiles in TileMapsGilles Roudière
2021-05-18Merge pull request #42742 from madmiraal/fix-12215Rémi Verschelde
Return RID instead of Object id in area-body_shape_entered-exited signals.
2021-05-18Area: Uncap the range for gravity and change the slider hintsAaron Franke
2021-05-18Merge pull request #36263 from Calinou/increase-default-2d-gravityRémi Verschelde