| Age | Commit message (Collapse) | Author |
|---|
|
In case the reference is stored in script, create a new instance to
avoid overriding the previous values.
Otherwise, re-use the reference as before to avoid extra allocations.
|
|
Rename RigidBody to RigidDynamicBody and SoftBody to SoftDynamicBody
|
|
|
|
|
|
Changes:
-Added support for custom inertia and center of mass in 3D
-Added support for custom center of mass in 2D
-Calculated center of mass from shapes in 2D (same as in 3D)
-Fixed mass properties calculation with disabled shapes in 2D/3D
-Removed first_integration which is not used in 2D and doesn't seem to
make a lot of sense (prevents omit_force_integration to work during the
first frame)
-Support for custom inertia on different axes for RigidBody3D
|
|
Instead of having a physics node named Static that can be either Static
or Kinematic, AnimatableBody is added again as a separate node:
-Inherited from StaticBody to make its usage clearer
-Still separated from CharacterBody to make its usage more focused
Properly implemented constant velocity for kinematic bodies in godot
physics servers (induced velocity without actually moving).
Also updated description for the different physics nodes to make their
usage clearer.
|
|
Clean physics direct body state usage in 2D and 3D physics
|
|
Change delta type to double in Physics_body_2/3D
|
|
|
|
|
|
Remove velocity transmission on_wall when collider is CharacterBody.
|
|
|
|
Use a C++ callback instead of Callable for synchronizing physics nodes' state with physics servers.
Remove usage of PhysicsDirectBodyState in physics nodes when not
necessary.
Store PhysicsDirectBodyState for bodies individually instead of a
singleton to avoid issues when accessing direct body state for multiple
bodies.
PhysicsDirectBodyState is initialized only when needed, so it doesn't
have to be created when using the physics server directly.
Move PhysicsDirectBodyState2D and PhysicsDirectBodyState3D to separate
cpp files.
|
|
Make separation ray shapes work properly in move_and_slide, wihtout the
specific code in CharacterBody like before.
Now most of the logic is handled inside the physics server. The only
thing that's needed is to use ray shapes only for recovery and ignore
them when performing the motion itself (unless we're snapping or slips
on slope is on).
|
|
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
|
|
|
|
|
|
Changes:
- Rename few methods/property and group them in the editor when it's possible
- Make MotionResult API consistency with KinematicCollision
- Return a boolean in move_and_slide if there was a collision
- New methods:
- get_floor_angle on CharacterBody to get the floor angle.
- get_angle on KinematicCollision to get the collision angle.
- get_last_slide_collision to quickly get the latest collision of move_and_slide.
|
|
|
|
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
|
|
|
|
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
|
|
When synchronizing CharacterBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
|
|
|
|
|
|
|
|
|
|
Now static body is used for moving platforms through kinematic motion
property, so sync to physics needs to be in StaticBody2D instead of
CharacterBody2D.
Constant kinematic motion is also supported in combination with sync to
physics for smoother movements.
|
|
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
|
|
More accurate unsafe motion calculation
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
|
|
Add support for controlling physics nodes' behavior when disabled
|
|
Fix editor suffixes and degrees conversion
|
|
New property disable_mode to set different behaviors:
Remove: remove from physics simulation
MakeStatic: change body mode to static (doesn't affect area and soft body)
KeepActive: do nothing
Extra change:
Handle disable/enable node state with specific notifications, in order
to differentiate global pause from disabled nodes.
|
|
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
|
|
Fix move_and_collide causing sliding on slopes
|
|
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
|
|
|
|
Expose collider RID in 2D/3D kinematic collision
|
|
|
|
Can be useful to access the colliding body information for bodies
created with the physics server directly.
|
|
|
|
CharacterBody has a linear_velocity property to replace the argument in
move_and_slide.
StaticBody handles reporting linear/angular velocity correctly when
kinematic motion is used (in 3D, used in vehicle and navigation).
|
|
Safe margin property on CharacterBody only, used as argument in
move_and_collide.
Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
|
|
Does the same thing as simulate motion from RigidBody in Kinematic mode,
and CharacterBody (previously KinematicBody).
Added support for constant linear/angular velocity with kinematic_motion
in StaticBody, which moves the body in physics.
Updated documentation for StaticBody and CharacterBody to describe their
functionalities more accurately.
|
|
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
|
|
- snap property to replace move_and_slide_with_snap()
- floor_max_angle, stop_on_slope, infinite_inertia, max_slides,
up_direction properties to replace arguments from move_and_slide()
- up direction now defaults to Vector3.UP and Vector2.UP
|
|
PhysicsBody now has methods move_and_collide/test_move and needed
properties for these methods: safe margin, locked axes (3D only).
Moved collision_exceptions from StaticBody to PhysicsBody for 3D
(same as 2D, and conforms to documentation).
RigidBody doesn't have test_motion method anymore, it's now redundant
with PhysicsBody.test_move.
|
|
Return RID instead of Object id in area-body_shape_entered-exited signals.
|
|
Removed _direct_state_changed bindings
Affects 2D and 3D nodes
Callbacks now use Callable
Tests were changed accordingly
|
|
|