| Age | Commit message (Collapse) | Author |
|---|
|
|
|
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
|
|
Wrapped libpng usage in a pair of functions under PNGDriverCommon,
which convert between Godot Image and png data.
Switched to libpng 1.6 simplified API for ease of maintenance.
Implemented ImageLoaderPNG and ResourceSaverPNG in terms of
PNGDriverCommon functions.
Travis, switched to builtin libpng (thus builtin freetype and zlib also)
so we can build on Xenial.
|
|
Include paths are processed from left to right, so we use Prepend to
ensure that paths to bundled thirdparty files will have precedence over
system paths (e.g. `/usr/include` should have lowest priority).
|
|
Many contributors (me included) did not fully understand what CCFLAGS,
CXXFLAGS and CPPFLAGS refer to exactly, and were thus not using them
in the way they are intended to be.
As per the SCons manual: https://www.scons.org/doc/HTML/scons-user/apa.html
- CCFLAGS: General options that are passed to the C and C++ compilers.
- CFLAGS: General options that are passed to the C compiler (C only;
not C++).
- CXXFLAGS: General options that are passed to the C++ compiler. By
default, this includes the value of $CCFLAGS, so that setting
$CCFLAGS affects both C and C++ compilation.
- CPPFLAGS: User-specified C preprocessor options. These will be
included in any command that uses the C preprocessor, including not
just compilation of C and C++ source files [...], but also [...]
Fortran [...] and [...] assembly language source file[s].
TL;DR: Compiler options go to CCFLAGS, unless they must be restricted
to either C (CFLAGS) or C++ (CXXFLAGS). Preprocessor defines go to
CPPFLAGS.
|
|
Godot supports many different compilers and for production releases we
have to support 3 currently: GCC8, Clang6, and MSVC2017. These compilers
all do slightly different things with -ffast-math and it is causing
issues now. See #24841, #24540, #10758, #10070. And probably other
complaints about physics differences between release and release_debug
builds.
I've done some performance comparisons on Linux x86_64. All tests are
ran 20 times.
Bunnymark: (higher is better)
(bunnies) min max stdev average
fast-math 7332 7597 71 7432
this pr 7379 7779 108 7621 (102%)
FPBench (gdscript port http://fpbench.org/) (lower is better)
(ms)
fast-math 15441 16127 192 15764
this pr 15671 16855 326 16001 (99%)
Float_add (adding floats in a tight loop) (lower is better)
(sec)
fast-math 5.49 5.78 0.07 5.65
this pr 5.65 5.90 0.06 5.76 (98%)
Float_div (dividing floats in a tight loop) (lower is better)
(sec)
fast-math 11.70 12.36 0.18 11.99
this pr 11.92 12.32 0.12 12.12 (99%)
Float_mul (multiplying floats in a tight loop) (lower is better)
(sec)
fast-math 11.72 12.17 0.12 11.93
this pr 12.01 12.62 0.17 12.26 (97%)
I have also looked at FPS numbers for tps-demo, 3d platformer, 2d
platformer, and sponza and could not find any measurable difference.
I believe that given the issues and oft-reported (physics) glitches on
release builds I believe that the couple of percent of tight-loop
floating point performance regression is well worth it.
This fixes #24540 and fixes #24841
|
|
Also finally move freetype to its own env and disable warnings for it.
Still needs some work to fix the awkward situation of the freetype and
svg modules used in scene/ and editor/ respectively.
|
|
|
|
This also removes `unix_global_settings_path` from SConstruct
since it is no longer used.
|
|
There are still some left in the Android Java code, even stuff to swap between
GLES1 and GLES2 support from early Godot days... would be good to see some cleanup
there too one day.
The "graphics/api" option for Android exports is removed, as only GLES 3.0 is supported.
It can be readded when GLES 2.0 support comes back. Fixes #13004.
|
|
|
|
Now that we have a built-in stacktrace on a segfault it would be useful
to have debug information on debug_release builds so that bugreports can
include this information. Without this debug info we will still get
function names in the backtrace but not file location.
This commit will by default build all targets with minimal debug info
and then strip the information into separate files. On MacOS this is a
.dSYM file, on Linux/MingW this is a .debug file. MacOSX will
automatically load a dSYM file if it exists in its debugger. On
Linux/MingW we create a 'gnu debuglink' meaning that gdb and friends
will automatically find the debug symbols if they exist.
Existing workflow for developers does not change at all, except that we
now create two instead of one build artifact by default.
This commit also adds a 'debug_symbols' option to X11, MacOS, and MingW
targets. The default is 'yes' which corresponds to -g1. The alternatives
are 'no' (don't generate debug infos at all) or 'full' which runs with
-g2. A target=debug build will now build with -g3.
|
|
Tried to organize the configure(env) calls in sections, using the same order
for all platforms whenever possible.
Apart from cosmetic changes, the following issues were fixed:
- Android: cleanup linkage, remove GLESv1_CM and GLESv2
- iPhone: Remove obsolete "ios_gles22_override" option
- OSX:
* Fix bits detection (default to 64) and remove obsolete "force_64_bits" option
(closes #9449)
* Make "fat" bits argument explicit
- Server: sync with X11
- Windows: clean up old DirectX 9 stuff
- X11:
* Do not require system OpenSSL for building (closes #9443)
* Fix typo'ed use_leak_sanitizer option
* Fix .llvm suffix overriding custom extra_suffix
|
|
All the warnings are factored out of the platform-specific files and moved to
SConstruct. Will have to check that it does not introduce regressions on some
platforms/compilers.
(cherry picked from commit 31107daa1a41fe9ab3c7c1868479e78e16848333)
|
|
Done with `autopep8 --select=E3,W3`, fixes:
- E301 - Add missing blank line.
- E302 - Add missing 2 blank lines.
- E303 - Remove extra blank lines.
- E304 - Remove blank line following function decorator.
- E309 - Add missing blank line.
- W391 - Remove trailing blank lines.
|
|
Done with `autopep8 --select=E2,W2`, fixes:
- E201 - Remove extraneous whitespace.
- E202 - Remove extraneous whitespace.
- E203 - Remove extraneous whitespace.
- E211 - Remove extraneous whitespace.
- E221 - Fix extraneous whitespace around keywords.
- E222 - Fix extraneous whitespace around keywords.
- E223 - Fix extraneous whitespace around keywords.
- E224 - Remove extraneous whitespace around operator.
- E225 - Fix missing whitespace around operator.
- E226 - Fix missing whitespace around operator.
- E227 - Fix missing whitespace around operator.
- E228 - Fix missing whitespace around operator.
- E231 - Add missing whitespace.
- E231 - Fix various deprecated code (via lib2to3).
- E241 - Fix extraneous whitespace around keywords.
- E242 - Remove extraneous whitespace around operator.
- E251 - Remove whitespace around parameter '=' sign.
- E261 - Fix spacing after comment hash.
- E262 - Fix spacing after comment hash.
- E265 - Format block comments.
- E271 - Fix extraneous whitespace around keywords.
- E272 - Fix extraneous whitespace around keywords.
- E273 - Fix extraneous whitespace around keywords.
- E274 - Fix extraneous whitespace around keywords.
- W291 - Remove trailing whitespace.
- W293 - Remove trailing whitespace.
|
|
Done with `autopep8 --select=E1`, fixes:
- E101 - Reindent all lines.
- E112 - Fix under-indented comments.
- E113 - Fix over-indented comments.
- E115 - Fix under-indented comments.
- E116 - Fix over-indented comments.
- E121 - Fix a badly indented line.
- E122 - Fix a badly indented line.
- E123 - Fix a badly indented line.
- E124 - Fix a badly indented line.
- E125 - Fix indentation undistinguish from the next logical line.
- E126 - Fix a badly indented line.
- E127 - Fix a badly indented line.
- E128 - Fix a badly indented line.
- E129 - Fix a badly indented line.
|
|
|
|
Not fully happy about the way this one interacts with the various
platforms. Maybe the platform_config.h should be generated by the
SCsub instead of passing a define just to know where is the header.
|
|
|
|
This allows us not to have to hack our definitions in the upstream files,
making it easier to upgrade to newer versions in the future.
For the include paths to work, the headers are moved to a GL subfolder to
match their upstream location.
|
|
Partial revert of f61eb5fd8e13642c82364f8ee66a0f6c791a4511.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|