| Age | Commit message (Collapse) | Author |
|---|
|
Add check for zero length motion at beginning of each sweep test loop in SpaceBullet::test_body_motion
|
|
This allows distro unbundling again for distros that ship Bullet 2.89+.
|
|
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
|
|
in SpaceBullet::test_body_motion.
|
|
Fixes #25476.
|
|
|
|
|
|
- Changing collision layer/mask now only updates the broadphase proxy to avoid the velocity to be reset each time (also avoids unnecessary computations)
- No rigid body update at all when the collision layer/mask stays the same
- Same changes for Area for optimization purpose
Fixes #32577
|
|
|
|
set during move_and_collide()
Fixes #31144
|
|
|
|
|
|
|
|
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
|
|
Fix some editor crashes
|
|
|
|
Fix updating of collision shape when the transform is set
|
|
|
|
|
|
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
|
|
This updates our local copy to commit 5ec8339b6fc491e3f09a34a4516e82787f053fcc.
We need a recent master commit for some new features that we use in Godot
(see #25543 and #28909).
To avoid warnings generated by Bullet headers included in our own module,
we include those headers with -isystem on GCC and Clang.
Fixes #29503.
|
|
Using codespell 1.15.0.
Method:
```
$ cat > ../godot-word-whitelist.txt << EOF
ang
curvelinear
doubleclick
leapyear
lod
merchantibility
nd
numer
ois
ony
que
seeked
synching
te
uint
unselect
webp
EOF
$ codespell -w -q 3 -I ../godot-word-whitelist.txt --skip="./thirdparty,*.po"
$ git diff // undo unwanted changes
```
|
|
Improved CCD calculation algorithm
|
|
|
|
|
|
Center shape according to logic Bullet applies
|
|
Reasoning: ID is not an acronym, it is simply short for identification, so it logically should not be capitalized. But even if it was an acronym, other acronyms in Godot are not capitalized, like p_rid, p_ip, and p_json.
|
|
|
|
KinematicBody performance and quality improvements
|
|
Include paths are processed from left to right, so we use Prepend to
ensure that paths to bundled thirdparty files will have precedence over
system paths (e.g. `/usr/include` should have lowest priority).
|
|
Allow adding disabled shapes
|
|
Many contributors (me included) did not fully understand what CCFLAGS,
CXXFLAGS and CPPFLAGS refer to exactly, and were thus not using them
in the way they are intended to be.
As per the SCons manual: https://www.scons.org/doc/HTML/scons-user/apa.html
- CCFLAGS: General options that are passed to the C and C++ compilers.
- CFLAGS: General options that are passed to the C compiler (C only;
not C++).
- CXXFLAGS: General options that are passed to the C++ compiler. By
default, this includes the value of $CCFLAGS, so that setting
$CCFLAGS affects both C and C++ compilation.
- CPPFLAGS: User-specified C preprocessor options. These will be
included in any command that uses the C preprocessor, including not
just compilation of C and C++ source files [...], but also [...]
Fortran [...] and [...] assembly language source file[s].
TL;DR: Compiler options go to CCFLAGS, unless they must be restricted
to either C (CFLAGS) or C++ (CXXFLAGS). Preprocessor defines go to
CPPFLAGS.
|
|
Adds the ability to directly add disabled shapes to a collision object. Before this commit a shape has always been assumed to be enabled and had to be disabled in an extra step.
|
|
|
|
Implemented terrain raycast acceleration
|
|
Fix missing re-activation of bullet physics sleep feature
|
|
|
|
Adds the missing option of re-enabling the sleep feature in bullet physics once a body had the sleep feature disabled.
|
|
|
|
|
|
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.
List of fixes and improvements:
- Fixed a general bug in move_and_slide that affects both GodotPhysics and
Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
is disabled. Not sure where that came from, but looking at the 2D physics
code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
tests against individual shapes of compound shapes. This is crucial to get
good performance with Gridmaps and in general improves the performance
whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
module for KinematicBodies to also do broadphase on the sub-shapes of
compound collision shapes. This is possible thanks to the dynamic AABB
tree that was previously disabled and it's the change that provides the
biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
was completely broken previously, overwriting previous results and similar
non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
not respected at all, and the KinematicBody code for ray separation was
complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
used in the ray result array.
There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").
Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
|
|
|
|
|
|
Optimized area check
|
|
|
|
Scaling the depth was the wrong solution for the KinematicBody jitter
because it causes jitter with RigidBody. Instead scale the margin that
is ignored to allow KinematicBody to still pick up the ray shape in the
kinematic test when the shape is just at margin distance from another
one. This solution does not cause jitter with either KinematicBody or
RigidBody.
|
|
Fix RayShape collision when used with a KinematicBody (Bullet Physics)
|
|
- Added code handling non-compound collision to recover_from_penetration_ray()
which is now needed due to the optimization avoiding the use of compound
collisions when only a single collision shape is used.
- Removed arbitrary margin applied in the collision algorithm of RayShapes
which causes jittered movement. For lack of a better replacement and for
lack of any explanation on why it has been introduced, it's now using the
shape's margin property instead which is small enough to not show visible
jitter.
- Tried to get rid of inconsistent uses of the collision margin.
- Removed hack from GodotDeepPenetrationContactResultCallback::addContactPoint
for RayShape collision as it's no longer needed as the collision algorithm
of RayShapes correctly calculates the contact normal for a while now.
Fixes #25227.
|
|
Fixed area collision report with concave
|
|
|