summaryrefslogtreecommitdiff
path: root/modules/bullet/space_bullet.cpp
AgeCommit message (Collapse)Author
2019-10-08Fixed RigidBody stuttering when changing collision layer/maskPouleyKetchoupp
- Changing collision layer/mask now only updates the broadphase proxy to avoid the velocity to be reset each time (also avoids unnecessary computations) - No rigid body update at all when the collision layer/mask stays the same - Same changes for Area for optimization purpose Fixes #32577
2019-08-12Replace 'ERR_EXPLAIN' with 'ERR_FAIL_*_MSG' in rest of 'modules/'Robin Hübner
2019-08-07Fixed KinematicCollision.get_local_shape() - the local shape id was never ↵PouleyKetchoupp
set during move_and_collide() Fixes #31144
2019-07-23Fix some code found by Coverity Scan and PVS Studioqarmin
2019-05-19Fix typos with codespellRémi Verschelde
Using codespell 1.15.0. Method: ``` $ cat > ../godot-word-whitelist.txt << EOF ang curvelinear doubleclick leapyear lod merchantibility nd numer ois ony que seeked synching te uint unselect webp EOF $ codespell -w -q 3 -I ../godot-word-whitelist.txt --skip="./thirdparty,*.po" $ git diff // undo unwanted changes ```
2019-03-27KinematicBody performance and quality improvementsDaniel Rakos
With this change finally one can use compound collisions (like those created by Gridmaps) without serious performance issues. The previous KinematicBody code for Bullet was practically doing a whole bunch of unnecessary calculations. Gridmaps with fairly large octant sizes (in my case 32) can get up to 10000x speedup with this change (literally!). I expect the FPS demo to get a fair speedup as well. List of fixes and improvements: - Fixed a general bug in move_and_slide that affects both GodotPhysics and Bullet, where ray shapes would be ignored unless the stop_on_slope parameter is disabled. Not sure where that came from, but looking at the 2D physics code it was obvious there's a difference. - Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision tests against individual shapes of compound shapes. This is crucial to get good performance with Gridmaps and in general improves the performance whenever a KinematicBody collides with compound collision shapes. - Added code to the broadphase collision detection code used by the Bullet module for KinematicBodies to also do broadphase on the sub-shapes of compound collision shapes. This is possible thanks to the dynamic AABB tree that was previously disabled and it's the change that provides the biggest performance boost. - Now broadphase test is only done once per KinematicBody in Bullet instead of once per each of its shapes which was completely unnecessary. - Fixed the way how the ray separation results are populated in Bullet which was completely broken previously, overwriting previous results and similar non-sense. - Fixed ray shapes for good now. Previously the margin set in the editor was not respected at all, and the KinematicBody code for ray separation was complete bogus, thus all previous attempts to fix it were mislead. - Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was used in the ray result array. There are a whole set of other problems with the KinematicBody code of Bullet which cost performance and may cause unexpected behavior, but those are not addressed in this change (need to keep it "simple"). Not sure whether this fixes any outstanding Github issues but I wouldn't be surprised.
2019-02-22Revert "Optimized area check"Rémi Verschelde
2019-02-21Merge pull request #26111 from AndreaCatania/areaoptiRémi Verschelde
Optimized area check
2019-02-21Optimized area checkAndrea Catania
2019-02-19Merge pull request #25788 from aqnuep/rayshape_fixRémi Verschelde
Fix RayShape collision when used with a KinematicBody (Bullet Physics)
2019-02-19Fix RayShape collision when used with a KinematicBody (Bullet Physics)Daniel Rakos
- Added code handling non-compound collision to recover_from_penetration_ray() which is now needed due to the optimization avoiding the use of compound collisions when only a single collision shape is used. - Removed arbitrary margin applied in the collision algorithm of RayShapes which causes jittered movement. For lack of a better replacement and for lack of any explanation on why it has been introduced, it's now using the shape's margin property instead which is small enough to not show visible jitter. - Tried to get rid of inconsistent uses of the collision margin. - Removed hack from GodotDeepPenetrationContactResultCallback::addContactPoint for RayShape collision as it's no longer needed as the collision algorithm of RayShapes correctly calculates the contact normal for a while now. Fixes #25227.
2019-02-18Fixed area collision report with concaveAndrea Catania
2019-02-18Added support to scale areasAndrea Catania
2019-01-21Fixed area overlaps if not moveAndrea Catania
2019-01-01Update copyright statements to 2019Rémi Verschelde
Happy new year to the wonderful Godot community!
2018-11-22Improved algorithm that check collisionAndrea Catania
2018-10-07Optimitzed area overlap checksAndrea Catania
2018-10-05Removed wrong equal vertex thresold to GJK solverAndrea Catania
2018-10-05Added correct allowed penetration parameter to cast motion APIAndrea Catania
2018-09-28Fix warnings about wrong member initialization order [-Wreorder]Rémi Verschelde
Fixes the following GCC 5 warnings: ``` core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder] core/object.h:192:15: warning: 'PropertyInfo MethodInfo::return_val' [-Wreorder] core/object.cpp:278:1: warning: when initialized here [-Wreorder] core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder] core/script_debugger_remote.h:91:6: warning: 'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder] core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder] core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder] core/script_debugger_remote.h:92:6: warning: 'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder] core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder] modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder] modules/bullet/area_bullet.h:92:39: warning: 'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder] modules/bullet/area_bullet.cpp:46:1: warning: when initialized here [-Wreorder] modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder] modules/bullet/collision_object_bullet.h:117:7: warning: 'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder] modules/bullet/collision_object_bullet.cpp:67:1: warning: when initialized here [-Wreorder] modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder] modules/bullet/godot_ray_world_algorithm.h:46:33: warning: 'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder] modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning: when initialized here [-Wreorder] modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder] modules/bullet/godot_result_callbacks.h:89:6: warning: 'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder] modules/bullet/godot_result_callbacks.h:93:2: warning: when initialized here [-Wreorder] modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder] modules/bullet/godot_result_callbacks.h:140:6: warning: 'int GodotAllContactResultCallback::m_resultMax' [-Wreorder] modules/bullet/godot_result_callbacks.h:147:2: warning: when initialized here [-Wreorder] modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder] modules/bullet/godot_result_callbacks.h:166:6: warning: 'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder] modules/bullet/godot_result_callbacks.h:173:2: warning: when initialized here [-Wreorder] modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder] modules/bullet/godot_result_callbacks.h:191:7: warning: 'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder] modules/bullet/godot_result_callbacks.h:199:2: warning: when initialized here [-Wreorder] modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder] modules/bullet/rigid_body_bullet.h:199:9: warning: 'real_t RigidBodyBullet::mass' [-Wreorder] modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder] modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder] modules/bullet/rigid_body_bullet.h:219:7: warning: 'bool RigidBodyBullet::isTransformChanged' [-Wreorder] modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder] modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder] modules/bullet/rigid_body_bullet.h:208:6: warning: 'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder] modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder] modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder] modules/bullet/soft_body_bullet.h:68:6: warning: 'int SoftBodyBullet::simulation_precision' [-Wreorder] modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder] modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder] modules/bullet/soft_body_bullet.h:61:14: warning: 'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder] modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder] modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder] modules/bullet/space_bullet.h:95:35: warning: 'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder] modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder] modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder] modules/bullet/space_bullet.h:99:23: warning: 'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder] modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder] modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder] modules/gdnative/nativescript/nativescript.h:73:9: warning: 'String NativeScriptDesc::documentation' [-Wreorder] modules/gdnative/nativescript/nativescript.h:88:9: warning: when initialized here [-Wreorder] modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder] modules/gdscript/gdscript.h:294:4: warning: 'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder] modules/gdscript/gdscript.h:303:2: warning: when initialized here [-Wreorder] scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder] scene/3d/physics_body.h:543:7: warning: 'bool PhysicalBone::_internal_static_body' [-Wreorder] scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder] scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder] scene/3d/physics_body.h:539:12: warning: 'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder] scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder] scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder] scene/3d/spring_arm.h:43:8: warning: 'float SpringArm::current_spring_length' [-Wreorder] scene/3d/spring_arm.cpp:37:1: warning: when initialized here [-Wreorder] scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder] scene/animation/skeleton_ik.h:152:7: warning: 'bool SkeletonIK::use_magnet' [-Wreorder] scene/animation/skeleton_ik.cpp:418:1: warning: when initialized here [-Wreorder] scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder] scene/resources/tile_set.h:83:7: warning: 'int TileSet::AutotileData::spacing' [-Wreorder] scene/resources/tile_set.h:92:12: warning: when initialized here [-Wreorder] scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder] scene/resources/tile_set.h:114:9: warning: 'Color TileSet::TileData::modulate' [-Wreorder] scene/resources/tile_set.h:120:12: warning: when initialized here [-Wreorder] servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder] servers/physics/body_sw.h:57:11: warning: 'uint16_t BodySW::locked_axis' [-Wreorder] servers/physics/body_sw.cpp:756:1: warning: when initialized here [-Wreorder] ``` Nothing really relevant for us, but it's not a bad consistency improvement anyway so worth taking.
2018-09-22Corrected cast_motion query behaviourAndrea Catania
2018-09-22Added rayshape solver algorithm to soft body configurator fixes #22283 fixes ↵Andrea Catania
#22249 fixes #22281
2018-09-19Added check to prevent contact signal to happen too earlyAndrea Catania
2018-09-12Make core/ includes absolute, remove subfolders from include pathRémi Verschelde
This allows more consistency in the manner we include core headers, where previously there would be a mix of absolute, relative and include path-dependent includes.
2018-09-06Fixing trimesh precisionAndrea Catania
2018-09-06Optimized in case is used just 1 shape with no transformAndrea Catania
2018-09-05Fixed bullet area vs Trimesh shape overlapAndrea Catania
2018-08-29Initialise rays_found count in test_ray_separation.Ibrahn Sahir
Prevents branch on uninit that could result in crashes with move_and_slide.
2018-08-26Correctly set safe_motion on cast_motion query Fixes: #21212Andrea Catania
2018-08-21Added ray / shape / point / motion / rest cast exclusion of area and or bodyAndrea Catania
2018-08-20Fixes to move and slide and ray separation, implement separation in Godot ↵Juan Linietsky
physics
2018-08-19Added ray shape and move_and_slide with snapping on 3D.Andrea Catania
Added stop_on_slope on 2d part
2018-08-18Improved move_and_slide function to stay on slope and fall on steep slopeAndrea Catania
2018-08-07Merge pull request #20381 from AndreaCatania/phymat_2Juan Linietsky
Improved Physics material
2018-08-07Removed physics material combination mode. Added rough and absorbent ↵Andrea Catania
parameter to material. Fixed 'change' signal connection
2018-07-26Merge pull request #15643 from organicpencil/bullet_contact_impulseRémi Verschelde
Expose PhysicsDirectBodyState.get_contact_impulse
2018-07-26Reduce unnecessary COW on Vector by make writing explicitHein-Pieter van Braam
This commit makes operator[] on Vector const and adds a write proxy to it. From now on writes to Vectors need to happen through the .write proxy. So for instance: Vector<int> vec; vec.push_back(10); std::cout << vec[0] << std::endl; vec.write[0] = 20; Failing to use the .write proxy will cause a compilation error. In addition COWable datatypes can now embed a CowData pointer to their data. This means that String, CharString, and VMap no longer use or derive from Vector. _ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug builds. This is a lot faster for Vector in the editor and while running tests. The reason why this difference used to exist is because force-inlined methods used to give a bad debugging experience. After extensive testing with modern compilers this is no longer the case.
2018-07-23Implemented Soft bodyAndreaCatania
- Soft Body Physics node - Soft Body Rendering - Soft body Editor - Soft body importer
2018-07-23Merge pull request #12403 from AndreaCatania/phymatJuan Linietsky
Physics material
2018-05-27Improved kinematic test_body_motion codeAndrea Catania
2018-05-11Implemented physics materialAndreaCatania
Hidden a function Fixed travis static check
2018-04-14Avoid converting Quat to Euler angles when not necessary.tagcup
Also ensure that get_scale doesn't arbitrarlity change the signs of scales, ensuring that the combination of get_rotation and get_scale gives the correct basis. Added various missing functions and constructors. Should close #17968.
2018-04-12Fixed wrong function callAndrea Catania
2018-04-12Rigidbody wake up when hitten by a kinematic bodyAndrea Catania
2018-04-04Merge pull request #17959 from AndreaCatania/kinfix2Rémi Verschelde
Fixed kinematic sliding on trimesh
2018-04-04Fixed kinematic sliding on trimeshAndrea Catania
2018-04-01physics area added monitorable checkAndrea Catania
2018-02-25Fixed kinematic char slidingAndrea Catania
2018-02-21Fix typos with codespellluz.paz
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt` Whitelist consists of: ``` ang doubleclick lod nd que te unselect ```
2018-02-20Improved kinematic body 2D and 3D, Now can move rigid bodyAndrea Catania
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 02:35:01 +0000