summaryrefslogtreecommitdiff
path: root/modules/bullet/collision_object_bullet.cpp
AgeCommit message (Collapse)Author
2019-05-02Merge pull request #27415 from aqnuep/kinematicbody_fixesRémi Verschelde
KinematicBody performance and quality improvements
2019-04-23Allow adding disabled shapesShyRed
Adds the ability to directly add disabled shapes to a collision object. Before this commit a shape has always been assumed to be enabled and had to be disabled in an extra step.
2019-03-27KinematicBody performance and quality improvementsDaniel Rakos
With this change finally one can use compound collisions (like those created by Gridmaps) without serious performance issues. The previous KinematicBody code for Bullet was practically doing a whole bunch of unnecessary calculations. Gridmaps with fairly large octant sizes (in my case 32) can get up to 10000x speedup with this change (literally!). I expect the FPS demo to get a fair speedup as well. List of fixes and improvements: - Fixed a general bug in move_and_slide that affects both GodotPhysics and Bullet, where ray shapes would be ignored unless the stop_on_slope parameter is disabled. Not sure where that came from, but looking at the 2D physics code it was obvious there's a difference. - Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision tests against individual shapes of compound shapes. This is crucial to get good performance with Gridmaps and in general improves the performance whenever a KinematicBody collides with compound collision shapes. - Added code to the broadphase collision detection code used by the Bullet module for KinematicBodies to also do broadphase on the sub-shapes of compound collision shapes. This is possible thanks to the dynamic AABB tree that was previously disabled and it's the change that provides the biggest performance boost. - Now broadphase test is only done once per KinematicBody in Bullet instead of once per each of its shapes which was completely unnecessary. - Fixed the way how the ray separation results are populated in Bullet which was completely broken previously, overwriting previous results and similar non-sense. - Fixed ray shapes for good now. Previously the margin set in the editor was not respected at all, and the KinematicBody code for ray separation was complete bogus, thus all previous attempts to fix it were mislead. - Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was used in the ray result array. There are a whole set of other problems with the KinematicBody code of Bullet which cost performance and may cause unexpected behavior, but those are not addressed in this change (need to keep it "simple"). Not sure whether this fixes any outstanding Github issues but I wouldn't be surprised.
2019-01-30Fix many asan and ubsan reported issuesHein-Pieter van Braam
This allows most demos to run without any ubsan or asan errors. There are still some things in thirdpart/ and some things in AudioServer that needs a look but this fixes a lot of issues. This should help debug less obvious issues, hopefully. This fixes #25217 and fixes #25218
2019-01-01Update copyright statements to 2019Rémi Verschelde
Happy new year to the wonderful Godot community!
2018-11-16Fix some undefined behaviour in Bullet module.Ibrahn Sahir
Nulling mainShape when it's deleted to avoid double free. Initialising vector in inertia calculation to work around bug in bullet.
2018-10-08Fix multi-statement macro call not being covered.J08nY
2018-10-07Optimitzed area overlap checksAndrea Catania
2018-10-06Improved code that handles collision shapes, fixes #21945Andrea Catania
2018-09-28Fix warnings about wrong member initialization order [-Wreorder]Rémi Verschelde
Fixes the following GCC 5 warnings: ``` core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder] core/object.h:192:15: warning: 'PropertyInfo MethodInfo::return_val' [-Wreorder] core/object.cpp:278:1: warning: when initialized here [-Wreorder] core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder] core/script_debugger_remote.h:91:6: warning: 'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder] core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder] core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder] core/script_debugger_remote.h:92:6: warning: 'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder] core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder] modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder] modules/bullet/area_bullet.h:92:39: warning: 'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder] modules/bullet/area_bullet.cpp:46:1: warning: when initialized here [-Wreorder] modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder] modules/bullet/collision_object_bullet.h:117:7: warning: 'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder] modules/bullet/collision_object_bullet.cpp:67:1: warning: when initialized here [-Wreorder] modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder] modules/bullet/godot_ray_world_algorithm.h:46:33: warning: 'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder] modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning: when initialized here [-Wreorder] modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder] modules/bullet/godot_result_callbacks.h:89:6: warning: 'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder] modules/bullet/godot_result_callbacks.h:93:2: warning: when initialized here [-Wreorder] modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder] modules/bullet/godot_result_callbacks.h:140:6: warning: 'int GodotAllContactResultCallback::m_resultMax' [-Wreorder] modules/bullet/godot_result_callbacks.h:147:2: warning: when initialized here [-Wreorder] modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder] modules/bullet/godot_result_callbacks.h:166:6: warning: 'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder] modules/bullet/godot_result_callbacks.h:173:2: warning: when initialized here [-Wreorder] modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder] modules/bullet/godot_result_callbacks.h:191:7: warning: 'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder] modules/bullet/godot_result_callbacks.h:199:2: warning: when initialized here [-Wreorder] modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder] modules/bullet/rigid_body_bullet.h:199:9: warning: 'real_t RigidBodyBullet::mass' [-Wreorder] modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder] modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder] modules/bullet/rigid_body_bullet.h:219:7: warning: 'bool RigidBodyBullet::isTransformChanged' [-Wreorder] modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder] modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder] modules/bullet/rigid_body_bullet.h:208:6: warning: 'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder] modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder] modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder] modules/bullet/soft_body_bullet.h:68:6: warning: 'int SoftBodyBullet::simulation_precision' [-Wreorder] modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder] modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder] modules/bullet/soft_body_bullet.h:61:14: warning: 'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder] modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder] modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder] modules/bullet/space_bullet.h:95:35: warning: 'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder] modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder] modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder] modules/bullet/space_bullet.h:99:23: warning: 'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder] modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder] modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder] modules/gdnative/nativescript/nativescript.h:73:9: warning: 'String NativeScriptDesc::documentation' [-Wreorder] modules/gdnative/nativescript/nativescript.h:88:9: warning: when initialized here [-Wreorder] modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder] modules/gdscript/gdscript.h:294:4: warning: 'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder] modules/gdscript/gdscript.h:303:2: warning: when initialized here [-Wreorder] scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder] scene/3d/physics_body.h:543:7: warning: 'bool PhysicalBone::_internal_static_body' [-Wreorder] scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder] scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder] scene/3d/physics_body.h:539:12: warning: 'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder] scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder] scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder] scene/3d/spring_arm.h:43:8: warning: 'float SpringArm::current_spring_length' [-Wreorder] scene/3d/spring_arm.cpp:37:1: warning: when initialized here [-Wreorder] scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder] scene/animation/skeleton_ik.h:152:7: warning: 'bool SkeletonIK::use_magnet' [-Wreorder] scene/animation/skeleton_ik.cpp:418:1: warning: when initialized here [-Wreorder] scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder] scene/resources/tile_set.h:83:7: warning: 'int TileSet::AutotileData::spacing' [-Wreorder] scene/resources/tile_set.h:92:12: warning: when initialized here [-Wreorder] scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder] scene/resources/tile_set.h:114:9: warning: 'Color TileSet::TileData::modulate' [-Wreorder] scene/resources/tile_set.h:120:12: warning: when initialized here [-Wreorder] servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder] servers/physics/body_sw.h:57:11: warning: 'uint16_t BodySW::locked_axis' [-Wreorder] servers/physics/body_sw.cpp:756:1: warning: when initialized here [-Wreorder] ``` Nothing really relevant for us, but it's not a bad consistency improvement anyway so worth taking.
2018-09-06Fixing trimesh precisionAndrea Catania
2018-09-06Optimized in case is used just 1 shape with no transformAndrea Catania
2018-07-26Reduce unnecessary COW on Vector by make writing explicitHein-Pieter van Braam
This commit makes operator[] on Vector const and adds a write proxy to it. From now on writes to Vectors need to happen through the .write proxy. So for instance: Vector<int> vec; vec.push_back(10); std::cout << vec[0] << std::endl; vec.write[0] = 20; Failing to use the .write proxy will cause a compilation error. In addition COWable datatypes can now embed a CowData pointer to their data. This means that String, CharString, and VMap no longer use or derive from Vector. _ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug builds. This is a lot faster for Vector in the editor and while running tests. The reason why this difference used to exist is because force-inlined methods used to give a bad debugging experience. After extensive testing with modern compilers this is no longer the case.
2018-07-23Implemented Soft bodyAndreaCatania
- Soft Body Physics node - Soft Body Rendering - Soft body Editor - Soft body importer
2018-04-14Avoid converting Quat to Euler angles when not necessary.tagcup
Also ensure that get_scale doesn't arbitrarlity change the signs of scales, ensuring that the combination of get_rotation and get_scale gives the correct basis. Added various missing functions and constructors. Should close #17968.
2018-04-09Fixed area overlap cleaningAndrea Catania
2018-04-06Fixed physics server area cleaningAndrea Catania
2018-01-16Fixed bullet physics body shape scalingAndreaCatania
2018-01-08Fixed Bullet collision shapes scaleAndreaCatania
2018-01-05Add missing copyright headers and fix formattingRémi Verschelde
Using `misc/scripts/fix_headers.py` on all Godot files. Some missing header guards were added, and the header inclusion order was fixed in the Bullet module.
2018-01-04Merge pull request #13257 from AndreaCatania/masterRémi Verschelde
Fixed kinematic movement stuck, Changed how shape scale works.
2018-01-01Update copyright statements to 2018Rémi Verschelde
Happy new year to the wonderful Godot community!
2017-12-23Fixed kinematic movement stuck, Changed how shape scale works, OptimizedAndreaCatania
2017-12-08Fixed bullet get_transform scaleAndreaCatania
2017-12-07Style: Apply new clang-format 5.0 style to all filesRémi Verschelde
2017-11-23Removed shape marginAndreaCatania
2017-11-09Merge pull request #12713 from AndreaCatania/masterJuan Linietsky
Rewritten kinematic system
2017-11-07Fixed collision exception - #12681AndreaCatania
2017-11-07Rewritten kinematic systemAndreaCatania
2017-11-04Bullet physics engine implementationAndreaCatania
This is a bullet wrapper that allows Godot to use Bullet physics and benefit about all features. Also it support all specific Godot physics functionality like multi shape body, areas, RayShape, etc.. It improve the Joints, Trimesh shape, and add support to soft body even if Godot is not yet ready to it.
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 03:46:22 +0000