summaryrefslogtreecommitdiff
path: root/core/debugger
AgeCommit message (Collapse)Author
2021-08-03Merge pull request #50454 from Ev1lbl0w/gsoc21-dapFabio Alessandrelli
Implemented initial DAP support
2021-08-02Implemented initial DAP supportEv1lbl0w
Implemented "output" event Refactored "seq" field generation Prevent debugging when editor and client are in different projects Removed unneeded references to peer on the parser Refactored way to detect project path Implemented "setBreakpoints" request Fix double events when terminating from client Refactored "stopped" event Implemented "stopped" with breakpoint event Implemented "stackTrace", "scopes" and "variables" request Report incoming number of stack dump variables Implemented proper reporting of scopes and variables from stack frames Prevent editor from grabbing focus when a DAP session is active Implemented "next" and "stepIn" requests Implemented "Source" checksum computing Switched expected errors from macros to silent guards Refactored message_id Respect client settings regarding lines/columns behavior Refactored nested DAP fields Implement reporting of "Members" and "Globals" scopes as well Fix error messages not being shown, and improved wrong path message
2021-07-25Use const references where possible for List range iteratorsRémi Verschelde
2021-07-23Use C++ iterators for Lists in many situationsAaron Franke
2021-06-19Rename `instance()`->`instantiate()` when it's a verbLightning_A
2021-06-11Rename Reference to RefCountedPedro J. Estébanez
2021-05-20Change behavior of String.rightTomasz Chabora
2021-05-06Rename `IP_Unix`, `IP_Address` and `TCP_Server` to remove underscoresHugo Locurcio
2021-03-16[Net] Make debugger peer less CPU intensive.Fabio Alessandrelli
Make sure that RemoteDebuggerPeer wait at least 100us between polls (effectively forcing a min tick of 100 microseconds). This greatly improve performances (the call to poll was useless since during low traffic, writes would always be available, and during high traffic, reads would always be available, effectively making it a busy-waiting loop). We could further improve this, by separating the two polls, and adjust the min tick based on load, but this is most likely more than enough already without sacrificing too much on high loads.
2021-03-12Fixes small typos and grammar correctionAnshul7sp1
2021-03-04RemoteDebugger: Fix possible division by zeroRémi Verschelde
2021-01-29Modernize ThreadPedro J. Estébanez
- Based on C++11's `thread` and `thread_local` - No more need to allocate-deallocate or check for null - No pointer anymore, just a member variable - Platform-specific implementations no longer needed (except for the few cases of non-portable functions) - Simpler for `NO_THREADS` - Thread ids are now the same across platforms (main is 1; others follow)
2021-01-01Update copyright statements to 2021Rémi Verschelde
Happy new year to the wonderful Godot community! 2020 has been a tough year for most of us personally, but a good year for Godot development nonetheless with a huge amount of work done towards Godot 4.0 and great improvements backported to the long-lived 3.2 branch. We've had close to 400 contributors to engine code this year, authoring near 7,000 commit! (And that's only for the `master` branch and for the engine code, there's a lot more when counting docs, demos and other first-party repos.) Here's to a great year 2021 for all Godot users 🎆
2020-12-28Merge pull request #44593 from madmiraal/rename-mainloop-methodsRémi Verschelde
Rename MainLoop methods to match Node methods
2020-12-28Rename empty() to is_empty()Marcel Admiraal
2020-12-22Rename MainLoop methods to match Node methodsMarcel Admiraal
2020-11-24Merge pull request #43730 from qarmin/core_drivers_default_valuesRémi Verschelde
Initialize class/struct variables with default values in core/ and drivers/
2020-11-23Initialize class/struct variables with default values in core/ and drivers/Rafał Mikrut
2020-11-23Fix DebuggerMarshalls errors while profilingPouleyKetchoupp
Fixed check for array size before func_size: when func_size is 0 there's only 1 entry left and not 3.
2020-11-07Reorganized core/ directory, it was too fatty alreadyreduz
-Removed FuncRef, since Callable makes it obsolete -Removed int_types.h as its obsolete in c++11+ -Changed color names code
2020-10-18Refactor MethodBind to use variadic templatesreduz
Removed make_binders and the old style generated binders.
2020-07-03Remove String::find_last (same as rfind)Stijn Hinlopen
2020-06-29Added Custom Performance Monitor and feature to read intermediate values of ↵simpu
Monitor Custom monitors can be added/removed/checked using `Performance.add_custom_monitor`/`Performance.remove_custom_monitor`/`Performance.has_custom_monitor` The value can be viewed in the `Monitor` tab of Debugger. Text before `/` is used to categorize the custom monitor. `EditorPerformanceProfiler` class is created to separate logic from `ScriptEditorDebugger` User can click on the graph of monitors to read the value at that point. Graph includes intermediate base lines.
2020-05-19Style: Remove unnecessary semicolons from `core`Rémi Verschelde
Semicolons are not necessary after function definitions or control flow blocks, and having some code use them makes things inconsistent (and occasionally can mess up `clang-format`'s formatting). Removing them is tedious work though, I had to do this manually (regex + manual review) as I couldn't find a tool for that. All other code folders would need to get the same treatment.
2020-05-14Style: Enforce braces around if blocks and loopsRémi Verschelde
Using clang-tidy's `readability-braces-around-statements`. https://clang.llvm.org/extra/clang-tidy/checks/readability-braces-around-statements.html
2020-05-14Style: Enforce separation line between function definitionsRémi Verschelde
I couldn't find a tool that enforces it, so I went the manual route: ``` find -name "thirdparty" -prune \ -o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \ -o -name "*.glsl" > files perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files) misc/scripts/fix_style.sh -c ``` This adds a newline after all `}` on the first column, unless they are followed by `#` (typically `#endif`). This leads to having lots of places with two lines between function/class definitions, but clang-format then fixes it as we enforce max one line of separation. This doesn't fix potential occurrences of function definitions which are indented (e.g. for a helper class defined in a .cpp), but it's better than nothing. Also can't be made to run easily on CI/hooks so we'll have to be careful with new code. Part of #33027.
2020-05-14Style: clang-format: Disable KeepEmptyLinesAtTheStartOfBlocksRémi Verschelde
Which means that reduz' beloved style which we all became used to will now be changed automatically to remove the first empty line. This makes us lean closer to 1TBS (the one true brace style) instead of hybridating it with some Allman-inspired spacing. There's still the case of braces around single-statement blocks that needs to be addressed (but clang-format can't help with that, but clang-tidy may if we agree about it). Part of #33027.
2020-05-14Port member initialization from constructor to declaration (C++11)Rémi Verschelde
Using `clang-tidy`'s `modernize-use-default-member-init` check and manual review of the changes, and some extra manual changes that `clang-tidy` failed to do. Also went manually through all of `core` to find occurrences that `clang-tidy` couldn't handle, especially all initializations done in a constructor without using initializer lists.
2020-05-12Add support for multiple RemoteDebuggerPeer(s).Fabio Alessandrelli
It is now possible to register protocol handlers (default tcp://) to support additional debugging communication layers (e.g. websocket).
2020-05-07Merge pull request #38522 from ThakeeNathees/printing-empty-string-fixRémi Verschelde
Fix: printing empty string does nothing in editor output pannel
2020-05-07Fix: printing empty string does nothing in editor output pannelThakee Nathees
Fix: #38490
2020-05-01Format remote printerr properly in script debugger outputPouleyKetchoupp
2020-04-28Rename InputFilter back to InputRémi Verschelde
It changed name as part of the DisplayServer and input refactoring in #37317, with the rationale that input no longer goes through the main loop, so the previous Input singleton now only does filtering. But the gains in consistency are quite limited in the renaming, and it breaks compatibility for all scripts and tutorials that access the Input singleton via the scripting language. A temporary option was suggested to keep the scripting singleton named `Input` even if its type is `InputFilter`, but that adds inconsistency and breaks C#. Fixes godotengine/godot-proposals#639. Fixes #37319. Fixes #37690.
2020-04-10Merge pull request #37450 from SkyLucilfer/profilerBugRémi Verschelde
Fix profiler frame number stops updating when window is minimized
2020-04-02Replace NULL with nullptrlupoDharkael
2020-03-31Fix profiler frame number stops updating when window is minimizedSkyJJ
2020-03-30SCons: Format buildsystem files with psf/blackRémi Verschelde
Configured for a max line length of 120 characters. psf/black is very opinionated and purposely doesn't leave much room for configuration. The output is mostly OK so that should be fine for us, but some things worth noting: - Manually wrapped strings will be reflowed, so by using a line length of 120 for the sake of preserving readability for our long command calls, it also means that some manually wrapped strings are back on the same line and should be manually merged again. - Code generators using string concatenation extensively look awful, since black puts each operand on a single line. We need to refactor these generators to use more pythonic string formatting, for which many options are available (`%`, `format` or f-strings). - CI checks and a pre-commit hook will be added to ensure that future buildsystem changes are well-formatted.
2020-03-27Renaming of servers for coherency.Juan Linietsky
VisualServer -> RenderingServer PhysicsServer -> PhysicsServer3D Physics2DServer -> PhysicsServer2D NavigationServer -> NavigationServer3D Navigation2DServer -> NavigationServer2D Also renamed corresponding files.
2020-03-26Refactored input, goes all via windows now.Juan Linietsky
Also renamed Input to InputFilter because all it does is filter events.
2020-03-26Effective DisplayServer separation, rename X11 -> LinuxBSDJuan Linietsky
2020-03-26Refactored Input, create DisplayServer and DisplayServerX11Juan Linietsky
2020-03-25Style: Harmonize header guards to style guide [Core]Rémi Verschelde
2020-03-17Style: Set clang-format Standard to Cpp11Rémi Verschelde
For us, it practically only changes the fact that `A<A<int>>` is now used instead of the C++03 compatible `A<A<int> >`. Note: clang-format 10+ changed the `Standard` arguments to fully specified `c++11`, `c++14`, etc. versions, but we can't use `c++17` now if we want to preserve compatibility with clang-format 8 and 9. `Cpp11` is still supported as deprecated alias for `Latest`.
2020-03-11Fix various typosluz.paz
Found via `codespell`
2020-03-10Fix -Wshadow=local warning in EngineDebuggerRémi Verschelde
2020-03-08Refactor ScriptDebugger.Fabio Alessandrelli
EngineDebugger is the new interface to access the debugger. It tries to be as agnostic as possible on the data that various subsystems can expose. It allows 2 types of interactions: - Profilers: A subsystem can register a profiler, assigning it a unique name. That name can be used to activate the profiler or add data to it. The registered profiler can be composed of up to 3 functions: - Toggle: called when the profiler is activated/deactivated. - Add: called whenever data is added to the debugger (via `EngineDebugger::profiler_add_frame_data`) - Tick: called every frame (during idle), receives frame times. - Captures: (Only relevant in remote debugger for now) A subsystem can register a capture, assigning it a unique name. When receiving a message, the remote debugger will check if it starts with `[prefix]:` and call the associated capture with name `prefix`. Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new profiler system. Port SceneDebugger and RemoteDebugger to the new capture system. The LocalDebugger also uses the new profiler system for scripts profiling.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 11:17:50 +0000