diff options
Diffstat (limited to 'thirdparty/miniupnpc/upnpcommands.h')
-rw-r--r-- | thirdparty/miniupnpc/upnpcommands.h | 348 |
1 files changed, 0 insertions, 348 deletions
diff --git a/thirdparty/miniupnpc/upnpcommands.h b/thirdparty/miniupnpc/upnpcommands.h deleted file mode 100644 index 0c6d501666..0000000000 --- a/thirdparty/miniupnpc/upnpcommands.h +++ /dev/null @@ -1,348 +0,0 @@ -/* $Id: upnpcommands.h,v 1.32 2018/03/13 23:34:47 nanard Exp $ */ -/* Miniupnp project : http://miniupnp.free.fr/ - * Author : Thomas Bernard - * Copyright (c) 2005-2018 Thomas Bernard - * This software is subject to the conditions detailed in the - * LICENCE file provided within this distribution */ -#ifndef UPNPCOMMANDS_H_INCLUDED -#define UPNPCOMMANDS_H_INCLUDED - -#include "miniupnpc_declspec.h" -#include "miniupnpctypes.h" - -/* MiniUPnPc return codes : */ -#define UPNPCOMMAND_SUCCESS (0) -#define UPNPCOMMAND_UNKNOWN_ERROR (-1) -#define UPNPCOMMAND_INVALID_ARGS (-2) -#define UPNPCOMMAND_HTTP_ERROR (-3) -#define UPNPCOMMAND_INVALID_RESPONSE (-4) -#define UPNPCOMMAND_MEM_ALLOC_ERROR (-5) - -#ifdef __cplusplus -extern "C" { -#endif - -struct PortMappingParserData; - -MINIUPNP_LIBSPEC UNSIGNED_INTEGER -UPNP_GetTotalBytesSent(const char * controlURL, - const char * servicetype); - -MINIUPNP_LIBSPEC UNSIGNED_INTEGER -UPNP_GetTotalBytesReceived(const char * controlURL, - const char * servicetype); - -MINIUPNP_LIBSPEC UNSIGNED_INTEGER -UPNP_GetTotalPacketsSent(const char * controlURL, - const char * servicetype); - -MINIUPNP_LIBSPEC UNSIGNED_INTEGER -UPNP_GetTotalPacketsReceived(const char * controlURL, - const char * servicetype); - -/* UPNP_GetStatusInfo() - * status and lastconnerror are 64 byte buffers - * Return values : - * UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR - * or a UPnP Error code */ -MINIUPNP_LIBSPEC int -UPNP_GetStatusInfo(const char * controlURL, - const char * servicetype, - char * status, - unsigned int * uptime, - char * lastconnerror); - -/* UPNP_GetConnectionTypeInfo() - * argument connectionType is a 64 character buffer - * Return Values : - * UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR - * or a UPnP Error code */ -MINIUPNP_LIBSPEC int -UPNP_GetConnectionTypeInfo(const char * controlURL, - const char * servicetype, - char * connectionType); - -/* UPNP_GetExternalIPAddress() call the corresponding UPNP method. - * if the third arg is not null the value is copied to it. - * at least 16 bytes must be available - * - * Return values : - * 0 : SUCCESS - * NON ZERO : ERROR Either an UPnP error code or an unknown error. - * - * possible UPnP Errors : - * 402 Invalid Args - See UPnP Device Architecture section on Control. - * 501 Action Failed - See UPnP Device Architecture section on Control. */ -MINIUPNP_LIBSPEC int -UPNP_GetExternalIPAddress(const char * controlURL, - const char * servicetype, - char * extIpAdd); - -/* UPNP_GetLinkLayerMaxBitRates() - * call WANCommonInterfaceConfig:1#GetCommonLinkProperties - * - * return values : - * UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR - * or a UPnP Error Code. */ -MINIUPNP_LIBSPEC int -UPNP_GetLinkLayerMaxBitRates(const char* controlURL, - const char* servicetype, - unsigned int * bitrateDown, - unsigned int * bitrateUp); - -/* UPNP_AddPortMapping() - * if desc is NULL, it will be defaulted to "libminiupnpc" - * remoteHost is usually NULL because IGD don't support it. - * - * Return values : - * 0 : SUCCESS - * NON ZERO : ERROR. Either an UPnP error code or an unknown error. - * - * List of possible UPnP errors for AddPortMapping : - * errorCode errorDescription (short) - Description (long) - * 402 Invalid Args - See UPnP Device Architecture section on Control. - * 501 Action Failed - See UPnP Device Architecture section on Control. - * 606 Action not authorized - The action requested REQUIRES authorization and - * the sender was not authorized. - * 715 WildCardNotPermittedInSrcIP - The source IP address cannot be - * wild-carded - * 716 WildCardNotPermittedInExtPort - The external port cannot be wild-carded - * 718 ConflictInMappingEntry - The port mapping entry specified conflicts - * with a mapping assigned previously to another client - * 724 SamePortValuesRequired - Internal and External port values - * must be the same - * 725 OnlyPermanentLeasesSupported - The NAT implementation only supports - * permanent lease times on port mappings - * 726 RemoteHostOnlySupportsWildcard - RemoteHost must be a wildcard - * and cannot be a specific IP address or DNS name - * 727 ExternalPortOnlySupportsWildcard - ExternalPort must be a wildcard and - * cannot be a specific port value - * 728 NoPortMapsAvailable - There are not enough free ports available to - * complete port mapping. - * 729 ConflictWithOtherMechanisms - Attempted port mapping is not allowed - * due to conflict with other mechanisms. - * 732 WildCardNotPermittedInIntPort - The internal port cannot be wild-carded - */ -MINIUPNP_LIBSPEC int -UPNP_AddPortMapping(const char * controlURL, const char * servicetype, - const char * extPort, - const char * inPort, - const char * inClient, - const char * desc, - const char * proto, - const char * remoteHost, - const char * leaseDuration); - -/* UPNP_AddAnyPortMapping() - * if desc is NULL, it will be defaulted to "libminiupnpc" - * remoteHost is usually NULL because IGD don't support it. - * - * Return values : - * 0 : SUCCESS - * NON ZERO : ERROR. Either an UPnP error code or an unknown error. - * - * List of possible UPnP errors for AddPortMapping : - * errorCode errorDescription (short) - Description (long) - * 402 Invalid Args - See UPnP Device Architecture section on Control. - * 501 Action Failed - See UPnP Device Architecture section on Control. - * 606 Action not authorized - The action requested REQUIRES authorization and - * the sender was not authorized. - * 715 WildCardNotPermittedInSrcIP - The source IP address cannot be - * wild-carded - * 716 WildCardNotPermittedInExtPort - The external port cannot be wild-carded - * 728 NoPortMapsAvailable - There are not enough free ports available to - * complete port mapping. - * 729 ConflictWithOtherMechanisms - Attempted port mapping is not allowed - * due to conflict with other mechanisms. - * 732 WildCardNotPermittedInIntPort - The internal port cannot be wild-carded - */ -MINIUPNP_LIBSPEC int -UPNP_AddAnyPortMapping(const char * controlURL, const char * servicetype, - const char * extPort, - const char * inPort, - const char * inClient, - const char * desc, - const char * proto, - const char * remoteHost, - const char * leaseDuration, - char * reservedPort); - -/* UPNP_DeletePortMapping() - * Use same argument values as what was used for AddPortMapping(). - * remoteHost is usually NULL because IGD don't support it. - * Return Values : - * 0 : SUCCESS - * NON ZERO : error. Either an UPnP error code or an undefined error. - * - * List of possible UPnP errors for DeletePortMapping : - * 402 Invalid Args - See UPnP Device Architecture section on Control. - * 606 Action not authorized - The action requested REQUIRES authorization - * and the sender was not authorized. - * 714 NoSuchEntryInArray - The specified value does not exist in the array */ -MINIUPNP_LIBSPEC int -UPNP_DeletePortMapping(const char * controlURL, const char * servicetype, - const char * extPort, const char * proto, - const char * remoteHost); - -/* UPNP_DeletePortRangeMapping() - * Use same argument values as what was used for AddPortMapping(). - * remoteHost is usually NULL because IGD don't support it. - * Return Values : - * 0 : SUCCESS - * NON ZERO : error. Either an UPnP error code or an undefined error. - * - * List of possible UPnP errors for DeletePortMapping : - * 606 Action not authorized - The action requested REQUIRES authorization - * and the sender was not authorized. - * 730 PortMappingNotFound - This error message is returned if no port - * mapping is found in the specified range. - * 733 InconsistentParameters - NewStartPort and NewEndPort values are not consistent. */ -MINIUPNP_LIBSPEC int -UPNP_DeletePortMappingRange(const char * controlURL, const char * servicetype, - const char * extPortStart, const char * extPortEnd, - const char * proto, - const char * manage); - -/* UPNP_GetPortMappingNumberOfEntries() - * not supported by all routers */ -MINIUPNP_LIBSPEC int -UPNP_GetPortMappingNumberOfEntries(const char* controlURL, - const char* servicetype, - unsigned int * num); - -/* UPNP_GetSpecificPortMappingEntry() - * retrieves an existing port mapping - * params : - * in extPort - * in proto - * in remoteHost - * out intClient (16 bytes) - * out intPort (6 bytes) - * out desc (80 bytes) - * out enabled (4 bytes) - * out leaseDuration (16 bytes) - * - * return value : - * UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR - * or a UPnP Error Code. - * - * List of possible UPnP errors for _GetSpecificPortMappingEntry : - * 402 Invalid Args - See UPnP Device Architecture section on Control. - * 501 Action Failed - See UPnP Device Architecture section on Control. - * 606 Action not authorized - The action requested REQUIRES authorization - * and the sender was not authorized. - * 714 NoSuchEntryInArray - The specified value does not exist in the array. - */ -MINIUPNP_LIBSPEC int -UPNP_GetSpecificPortMappingEntry(const char * controlURL, - const char * servicetype, - const char * extPort, - const char * proto, - const char * remoteHost, - char * intClient, - char * intPort, - char * desc, - char * enabled, - char * leaseDuration); - -/* UPNP_GetGenericPortMappingEntry() - * params : - * in index - * out extPort (6 bytes) - * out intClient (16 bytes) - * out intPort (6 bytes) - * out protocol (4 bytes) - * out desc (80 bytes) - * out enabled (4 bytes) - * out rHost (64 bytes) - * out duration (16 bytes) - * - * return value : - * UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR - * or a UPnP Error Code. - * - * Possible UPNP Error codes : - * 402 Invalid Args - See UPnP Device Architecture section on Control. - * 606 Action not authorized - The action requested REQUIRES authorization - * and the sender was not authorized. - * 713 SpecifiedArrayIndexInvalid - The specified array index is out of bounds - */ -MINIUPNP_LIBSPEC int -UPNP_GetGenericPortMappingEntry(const char * controlURL, - const char * servicetype, - const char * index, - char * extPort, - char * intClient, - char * intPort, - char * protocol, - char * desc, - char * enabled, - char * rHost, - char * duration); - -/* UPNP_GetListOfPortMappings() Available in IGD v2 - * - * - * Possible UPNP Error codes : - * 606 Action not Authorized - * 730 PortMappingNotFound - no port mapping is found in the specified range. - * 733 InconsistantParameters - NewStartPort and NewEndPort values are not - * consistent. - */ -MINIUPNP_LIBSPEC int -UPNP_GetListOfPortMappings(const char * controlURL, - const char * servicetype, - const char * startPort, - const char * endPort, - const char * protocol, - const char * numberOfPorts, - struct PortMappingParserData * data); - -/* IGD:2, functions for service WANIPv6FirewallControl:1 */ -MINIUPNP_LIBSPEC int -UPNP_GetFirewallStatus(const char * controlURL, - const char * servicetype, - int * firewallEnabled, - int * inboundPinholeAllowed); - -MINIUPNP_LIBSPEC int -UPNP_GetOutboundPinholeTimeout(const char * controlURL, const char * servicetype, - const char * remoteHost, - const char * remotePort, - const char * intClient, - const char * intPort, - const char * proto, - int * opTimeout); - -MINIUPNP_LIBSPEC int -UPNP_AddPinhole(const char * controlURL, const char * servicetype, - const char * remoteHost, - const char * remotePort, - const char * intClient, - const char * intPort, - const char * proto, - const char * leaseTime, - char * uniqueID); - -MINIUPNP_LIBSPEC int -UPNP_UpdatePinhole(const char * controlURL, const char * servicetype, - const char * uniqueID, - const char * leaseTime); - -MINIUPNP_LIBSPEC int -UPNP_DeletePinhole(const char * controlURL, const char * servicetype, const char * uniqueID); - -MINIUPNP_LIBSPEC int -UPNP_CheckPinholeWorking(const char * controlURL, const char * servicetype, - const char * uniqueID, int * isWorking); - -MINIUPNP_LIBSPEC int -UPNP_GetPinholePackets(const char * controlURL, const char * servicetype, - const char * uniqueID, int * packets); - -#ifdef __cplusplus -} -#endif - -#endif - |