diff options
Diffstat (limited to 'thirdparty/mbedtls/library/timing.c')
| -rw-r--r-- | thirdparty/mbedtls/library/timing.c | 536 |
1 files changed, 536 insertions, 0 deletions
diff --git a/thirdparty/mbedtls/library/timing.c b/thirdparty/mbedtls/library/timing.c new file mode 100644 index 0000000000..35d6d89e2b --- /dev/null +++ b/thirdparty/mbedtls/library/timing.c @@ -0,0 +1,536 @@ +/* + * Portable interface to the CPU cycle counter + * + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "mbedtls/config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_PLATFORM_C) +#include "mbedtls/platform.h" +#else +#include <stdio.h> +#define mbedtls_printf printf +#endif + +#if defined(MBEDTLS_TIMING_C) + +#include "mbedtls/timing.h" + +#if !defined(MBEDTLS_TIMING_ALT) + +#if !defined(unix) && !defined(__unix__) && !defined(__unix) && \ + !defined(__APPLE__) && !defined(_WIN32) +#error "This module only works on Unix and Windows, see MBEDTLS_TIMING_C in config.h" +#endif + +#ifndef asm +#define asm __asm +#endif + +#if defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) + +#include <windows.h> +#include <winbase.h> + +struct _hr_time +{ + LARGE_INTEGER start; +}; + +#else + +#include <unistd.h> +#include <sys/types.h> +#include <sys/time.h> +#include <signal.h> +#include <time.h> + +struct _hr_time +{ + struct timeval start; +}; + +#endif /* _WIN32 && !EFIX64 && !EFI32 */ + +#if !defined(HAVE_HARDCLOCK) && defined(MBEDTLS_HAVE_ASM) && \ + ( defined(_MSC_VER) && defined(_M_IX86) ) || defined(__WATCOMC__) + +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + unsigned long tsc; + __asm rdtsc + __asm mov [tsc], eax + return( tsc ); +} +#endif /* !HAVE_HARDCLOCK && MBEDTLS_HAVE_ASM && + ( _MSC_VER && _M_IX86 ) || __WATCOMC__ */ + +/* some versions of mingw-64 have 32-bit longs even on x84_64 */ +#if !defined(HAVE_HARDCLOCK) && defined(MBEDTLS_HAVE_ASM) && \ + defined(__GNUC__) && ( defined(__i386__) || ( \ + ( defined(__amd64__) || defined( __x86_64__) ) && __SIZEOF_LONG__ == 4 ) ) + +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + unsigned long lo, hi; + asm volatile( "rdtsc" : "=a" (lo), "=d" (hi) ); + return( lo ); +} +#endif /* !HAVE_HARDCLOCK && MBEDTLS_HAVE_ASM && + __GNUC__ && __i386__ */ + +#if !defined(HAVE_HARDCLOCK) && defined(MBEDTLS_HAVE_ASM) && \ + defined(__GNUC__) && ( defined(__amd64__) || defined(__x86_64__) ) + +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + unsigned long lo, hi; + asm volatile( "rdtsc" : "=a" (lo), "=d" (hi) ); + return( lo | ( hi << 32 ) ); +} +#endif /* !HAVE_HARDCLOCK && MBEDTLS_HAVE_ASM && + __GNUC__ && ( __amd64__ || __x86_64__ ) */ + +#if !defined(HAVE_HARDCLOCK) && defined(MBEDTLS_HAVE_ASM) && \ + defined(__GNUC__) && ( defined(__powerpc__) || defined(__ppc__) ) + +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + unsigned long tbl, tbu0, tbu1; + + do + { + asm volatile( "mftbu %0" : "=r" (tbu0) ); + asm volatile( "mftb %0" : "=r" (tbl ) ); + asm volatile( "mftbu %0" : "=r" (tbu1) ); + } + while( tbu0 != tbu1 ); + + return( tbl ); +} +#endif /* !HAVE_HARDCLOCK && MBEDTLS_HAVE_ASM && + __GNUC__ && ( __powerpc__ || __ppc__ ) */ + +#if !defined(HAVE_HARDCLOCK) && defined(MBEDTLS_HAVE_ASM) && \ + defined(__GNUC__) && defined(__sparc64__) + +#if defined(__OpenBSD__) +#warning OpenBSD does not allow access to tick register using software version instead +#else +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + unsigned long tick; + asm volatile( "rdpr %%tick, %0;" : "=&r" (tick) ); + return( tick ); +} +#endif /* __OpenBSD__ */ +#endif /* !HAVE_HARDCLOCK && MBEDTLS_HAVE_ASM && + __GNUC__ && __sparc64__ */ + +#if !defined(HAVE_HARDCLOCK) && defined(MBEDTLS_HAVE_ASM) && \ + defined(__GNUC__) && defined(__sparc__) && !defined(__sparc64__) + +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + unsigned long tick; + asm volatile( ".byte 0x83, 0x41, 0x00, 0x00" ); + asm volatile( "mov %%g1, %0" : "=r" (tick) ); + return( tick ); +} +#endif /* !HAVE_HARDCLOCK && MBEDTLS_HAVE_ASM && + __GNUC__ && __sparc__ && !__sparc64__ */ + +#if !defined(HAVE_HARDCLOCK) && defined(MBEDTLS_HAVE_ASM) && \ + defined(__GNUC__) && defined(__alpha__) + +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + unsigned long cc; + asm volatile( "rpcc %0" : "=r" (cc) ); + return( cc & 0xFFFFFFFF ); +} +#endif /* !HAVE_HARDCLOCK && MBEDTLS_HAVE_ASM && + __GNUC__ && __alpha__ */ + +#if !defined(HAVE_HARDCLOCK) && defined(MBEDTLS_HAVE_ASM) && \ + defined(__GNUC__) && defined(__ia64__) + +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + unsigned long itc; + asm volatile( "mov %0 = ar.itc" : "=r" (itc) ); + return( itc ); +} +#endif /* !HAVE_HARDCLOCK && MBEDTLS_HAVE_ASM && + __GNUC__ && __ia64__ */ + +#if !defined(HAVE_HARDCLOCK) && defined(_MSC_VER) && \ + !defined(EFIX64) && !defined(EFI32) + +#define HAVE_HARDCLOCK + +unsigned long mbedtls_timing_hardclock( void ) +{ + LARGE_INTEGER offset; + + QueryPerformanceCounter( &offset ); + + return( (unsigned long)( offset.QuadPart ) ); +} +#endif /* !HAVE_HARDCLOCK && _MSC_VER && !EFIX64 && !EFI32 */ + +#if !defined(HAVE_HARDCLOCK) + +#define HAVE_HARDCLOCK + +static int hardclock_init = 0; +static struct timeval tv_init; + +unsigned long mbedtls_timing_hardclock( void ) +{ + struct timeval tv_cur; + + if( hardclock_init == 0 ) + { + gettimeofday( &tv_init, NULL ); + hardclock_init = 1; + } + + gettimeofday( &tv_cur, NULL ); + return( ( tv_cur.tv_sec - tv_init.tv_sec ) * 1000000 + + ( tv_cur.tv_usec - tv_init.tv_usec ) ); +} +#endif /* !HAVE_HARDCLOCK */ + +volatile int mbedtls_timing_alarmed = 0; + +#if defined(_WIN32) && !defined(EFIX64) && !defined(EFI32) + +unsigned long mbedtls_timing_get_timer( struct mbedtls_timing_hr_time *val, int reset ) +{ + struct _hr_time *t = (struct _hr_time *) val; + + if( reset ) + { + QueryPerformanceCounter( &t->start ); + return( 0 ); + } + else + { + unsigned long delta; + LARGE_INTEGER now, hfreq; + QueryPerformanceCounter( &now ); + QueryPerformanceFrequency( &hfreq ); + delta = (unsigned long)( ( now.QuadPart - t->start.QuadPart ) * 1000ul + / hfreq.QuadPart ); + return( delta ); + } +} + +/* It's OK to use a global because alarm() is supposed to be global anyway */ +static DWORD alarmMs; + +static DWORD WINAPI TimerProc( LPVOID TimerContext ) +{ + ((void) TimerContext); + Sleep( alarmMs ); + mbedtls_timing_alarmed = 1; + return( TRUE ); +} + +void mbedtls_set_alarm( int seconds ) +{ + DWORD ThreadId; + + if( seconds == 0 ) + { + /* No need to create a thread for this simple case. + * Also, this shorcut is more reliable at least on MinGW32 */ + mbedtls_timing_alarmed = 1; + return; + } + + mbedtls_timing_alarmed = 0; + alarmMs = seconds * 1000; + CloseHandle( CreateThread( NULL, 0, TimerProc, NULL, 0, &ThreadId ) ); +} + +#else /* _WIN32 && !EFIX64 && !EFI32 */ + +unsigned long mbedtls_timing_get_timer( struct mbedtls_timing_hr_time *val, int reset ) +{ + struct _hr_time *t = (struct _hr_time *) val; + + if( reset ) + { + gettimeofday( &t->start, NULL ); + return( 0 ); + } + else + { + unsigned long delta; + struct timeval now; + gettimeofday( &now, NULL ); + delta = ( now.tv_sec - t->start.tv_sec ) * 1000ul + + ( now.tv_usec - t->start.tv_usec ) / 1000; + return( delta ); + } +} + +static void sighandler( int signum ) +{ + mbedtls_timing_alarmed = 1; + signal( signum, sighandler ); +} + +void mbedtls_set_alarm( int seconds ) +{ + mbedtls_timing_alarmed = 0; + signal( SIGALRM, sighandler ); + alarm( seconds ); + if( seconds == 0 ) + { + /* alarm(0) cancelled any previous pending alarm, but the + handler won't fire, so raise the flag straight away. */ + mbedtls_timing_alarmed = 1; + } +} + +#endif /* _WIN32 && !EFIX64 && !EFI32 */ + +/* + * Set delays to watch + */ +void mbedtls_timing_set_delay( void *data, uint32_t int_ms, uint32_t fin_ms ) +{ + mbedtls_timing_delay_context *ctx = (mbedtls_timing_delay_context *) data; + + ctx->int_ms = int_ms; + ctx->fin_ms = fin_ms; + + if( fin_ms != 0 ) + (void) mbedtls_timing_get_timer( &ctx->timer, 1 ); +} + +/* + * Get number of delays expired + */ +int mbedtls_timing_get_delay( void *data ) +{ + mbedtls_timing_delay_context *ctx = (mbedtls_timing_delay_context *) data; + unsigned long elapsed_ms; + + if( ctx->fin_ms == 0 ) + return( -1 ); + + elapsed_ms = mbedtls_timing_get_timer( &ctx->timer, 0 ); + + if( elapsed_ms >= ctx->fin_ms ) + return( 2 ); + + if( elapsed_ms >= ctx->int_ms ) + return( 1 ); + + return( 0 ); +} + +#endif /* !MBEDTLS_TIMING_ALT */ + +#if defined(MBEDTLS_SELF_TEST) + +/* + * Busy-waits for the given number of milliseconds. + * Used for testing mbedtls_timing_hardclock. + */ +static void busy_msleep( unsigned long msec ) +{ + struct mbedtls_timing_hr_time hires; + unsigned long i = 0; /* for busy-waiting */ + volatile unsigned long j; /* to prevent optimisation */ + + (void) mbedtls_timing_get_timer( &hires, 1 ); + + while( mbedtls_timing_get_timer( &hires, 0 ) < msec ) + i++; + + j = i; + (void) j; +} + +#define FAIL do \ + { \ + if( verbose != 0 ) \ + { \ + mbedtls_printf( "failed at line %d\n", __LINE__ ); \ + mbedtls_printf( " cycles=%lu ratio=%lu millisecs=%lu secs=%lu hardfail=%d a=%lu b=%lu\n", \ + cycles, ratio, millisecs, secs, hardfail, \ + (unsigned long) a, (unsigned long) b ); \ + mbedtls_printf( " elapsed(hires)=%lu elapsed(ctx)=%lu status(ctx)=%d\n", \ + mbedtls_timing_get_timer( &hires, 0 ), \ + mbedtls_timing_get_timer( &ctx.timer, 0 ), \ + mbedtls_timing_get_delay( &ctx ) ); \ + } \ + return( 1 ); \ + } while( 0 ) + +/* + * Checkup routine + * + * Warning: this is work in progress, some tests may not be reliable enough + * yet! False positives may happen. + */ +int mbedtls_timing_self_test( int verbose ) +{ + unsigned long cycles = 0, ratio = 0; + unsigned long millisecs = 0, secs = 0; + int hardfail = 0; + struct mbedtls_timing_hr_time hires; + uint32_t a = 0, b = 0; + mbedtls_timing_delay_context ctx; + + if( verbose != 0 ) + mbedtls_printf( " TIMING tests note: will take some time!\n" ); + + if( verbose != 0 ) + mbedtls_printf( " TIMING test #1 (set_alarm / get_timer): " ); + + { + secs = 1; + + (void) mbedtls_timing_get_timer( &hires, 1 ); + + mbedtls_set_alarm( (int) secs ); + while( !mbedtls_timing_alarmed ) + ; + + millisecs = mbedtls_timing_get_timer( &hires, 0 ); + + /* For some reason on Windows it looks like alarm has an extra delay + * (maybe related to creating a new thread). Allow some room here. */ + if( millisecs < 800 * secs || millisecs > 1200 * secs + 300 ) + FAIL; + } + + if( verbose != 0 ) + mbedtls_printf( "passed\n" ); + + if( verbose != 0 ) + mbedtls_printf( " TIMING test #2 (set/get_delay ): " ); + + { + a = 800; + b = 400; + mbedtls_timing_set_delay( &ctx, a, a + b ); /* T = 0 */ + + busy_msleep( a - a / 4 ); /* T = a - a/4 */ + if( mbedtls_timing_get_delay( &ctx ) != 0 ) + FAIL; + + busy_msleep( a / 4 + b / 4 ); /* T = a + b/4 */ + if( mbedtls_timing_get_delay( &ctx ) != 1 ) + FAIL; + + busy_msleep( b ); /* T = a + b + b/4 */ + if( mbedtls_timing_get_delay( &ctx ) != 2 ) + FAIL; + } + + mbedtls_timing_set_delay( &ctx, 0, 0 ); + busy_msleep( 200 ); + if( mbedtls_timing_get_delay( &ctx ) != -1 ) + FAIL; + + if( verbose != 0 ) + mbedtls_printf( "passed\n" ); + + if( verbose != 0 ) + mbedtls_printf( " TIMING test #3 (hardclock / get_timer): " ); + + /* + * Allow one failure for possible counter wrapping. + * On a 4Ghz 32-bit machine the cycle counter wraps about once per second; + * since the whole test is about 10ms, it shouldn't happen twice in a row. + */ + +hard_test: + if( hardfail > 1 ) + { + if( verbose != 0 ) + mbedtls_printf( "failed (ignored)\n" ); + + goto hard_test_done; + } + + /* Get a reference ratio cycles/ms */ + millisecs = 1; + cycles = mbedtls_timing_hardclock(); + busy_msleep( millisecs ); + cycles = mbedtls_timing_hardclock() - cycles; + ratio = cycles / millisecs; + + /* Check that the ratio is mostly constant */ + for( millisecs = 2; millisecs <= 4; millisecs++ ) + { + cycles = mbedtls_timing_hardclock(); + busy_msleep( millisecs ); + cycles = mbedtls_timing_hardclock() - cycles; + + /* Allow variation up to 20% */ + if( cycles / millisecs < ratio - ratio / 5 || + cycles / millisecs > ratio + ratio / 5 ) + { + hardfail++; + goto hard_test; + } + } + + if( verbose != 0 ) + mbedtls_printf( "passed\n" ); + +hard_test_done: + + if( verbose != 0 ) + mbedtls_printf( "\n" ); + + return( 0 ); +} + +#endif /* MBEDTLS_SELF_TEST */ + +#endif /* MBEDTLS_TIMING_C */ |