diff options
Diffstat (limited to 'thirdparty/mbedtls/library/mps_reader.h')
| -rw-r--r-- | thirdparty/mbedtls/library/mps_reader.h | 382 |
1 files changed, 382 insertions, 0 deletions
diff --git a/thirdparty/mbedtls/library/mps_reader.h b/thirdparty/mbedtls/library/mps_reader.h new file mode 100644 index 0000000000..427c1bd254 --- /dev/null +++ b/thirdparty/mbedtls/library/mps_reader.h @@ -0,0 +1,382 @@ +/* + * Copyright The Mbed TLS Contributors + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +/** + * \file mps_reader.h + * + * \brief This file defines reader objects, which together with their + * sibling writer objects form the basis for the communication + * between the various layers of the Mbed TLS messaging stack, + * as well as the communication between the messaging stack and + * the (D)TLS handshake protocol implementation. + * + * Readers provide a means of transferring incoming data from + * a 'producer' providing it in chunks of arbitrary size, to + * a 'consumer' which fetches and processes it in chunks of + * again arbitrary, and potentially different, size. + * + * Readers can thus be seen as datagram-to-stream converters, + * and they abstract away the following two tasks from the user: + * 1. The pointer arithmetic of stepping through a producer- + * provided chunk in smaller chunks. + * 2. The merging of incoming data chunks in case the + * consumer requests data in larger chunks than what the + * producer provides. + * + * The basic abstract flow of operation is the following: + * - Initially, the reader is in 'producing mode'. + * - The producer hands an incoming data buffer to the reader, + * moving it from 'producing' to 'consuming' mode. + * - The consumer subsequently fetches and processes the buffer + * content. Once that's done -- or partially done and a consumer's + * request can't be fulfilled -- the producer revokes the reader's + * access to the incoming data buffer, putting the reader back to + * producing mode. + * - The producer subsequently gathers more incoming data and hands + * it to the reader until it switches back to consuming mode + * if enough data is available for the last consumer request to + * be satisfiable. + * - Repeat the above. + * + * The abstract states of the reader from the producer's and + * consumer's perspective are as follows: + * + * - From the perspective of the consumer, the state of the + * reader consists of the following: + * - A byte stream representing (concatenation of) the data + * received through calls to mbedtls_mps_reader_get(), + * - A marker within that byte stream indicating which data + * can be considered processed, and hence need not be retained, + * when the reader is passed back to the producer via + * mbedtls_mps_reader_reclaim(). + * The marker is set via mbedtls_mps_reader_commit() + * which places it at the end of the current byte stream. + * The consumer need not be aware of the distinction between consumer + * and producer mode, because it only interfaces with the reader + * when the latter is in consuming mode. + * + * - From the perspective of the producer, the reader's state is one of: + * - Attached: The reader is in consuming mode. + * - Unset: No incoming data buffer is currently managed by the reader, + * and all previously handed incoming data buffers have been + * fully processed. More data needs to be fed into the reader + * via mbedtls_mps_reader_feed(). + * + * - Accumulating: No incoming data buffer is currently managed by the + * reader, but some data from the previous incoming data + * buffer hasn't been processed yet and is internally + * held back. + * The Attached state belongs to consuming mode, while the Unset and + * Accumulating states belong to producing mode. + * + * Transitioning from the Unset or Accumulating state to Attached is + * done via successful calls to mbedtls_mps_reader_feed(), while + * transitioning from Attached to either Unset or Accumulating (depending + * on what has been processed) is done via mbedtls_mps_reader_reclaim(). + * + * The following diagram depicts the producer-state progression: + * + * +------------------+ reclaim + * | Unset +<-------------------------------------+ get + * +--------|---------+ | +------+ + * | | | | + * | | | | + * | feed +---------+---+--+ | + * +--------------------------------------> <---+ + * | Attached | + * +--------------------------------------> <---+ + * | feed, enough data available +---------+---+--+ | + * | to serve previous consumer request | | | + * | | | | + * +--------+---------+ | +------+ + * +----> Accumulating |<-------------------------------------+ commit + * | +---+--------------+ reclaim, previous read request + * | | couldn't be fulfilled + * | | + * +--------+ + * feed, need more data to serve + * previous consumer request + * | + * | + * producing mode | consuming mode + * | + * + */ + +#ifndef MBEDTLS_READER_H +#define MBEDTLS_READER_H + +#include <stdio.h> + +#include "mps_common.h" +#include "mps_error.h" + +struct mbedtls_mps_reader; +typedef struct mbedtls_mps_reader mbedtls_mps_reader; + +/* + * Structure definitions + */ + +struct mbedtls_mps_reader +{ + unsigned char *frag; /*!< The fragment of incoming data managed by + * the reader; it is provided to the reader + * through mbedtls_mps_reader_feed(). The reader + * does not own the fragment and does not + * perform any allocation operations on it, + * but does have read and write access to it. + * + * The reader is in consuming mode if + * and only if \c frag is not \c NULL. */ + mbedtls_mps_stored_size_t frag_len; + /*!< The length of the current fragment. + * Must be 0 if \c frag == \c NULL. */ + mbedtls_mps_stored_size_t commit; + /*!< The offset of the last commit, relative + * to the first byte in the fragment, if + * no accumulator is present. If an accumulator + * is present, it is viewed as a prefix to the + * current fragment, and this variable contains + * an offset from the beginning of the accumulator. + * + * This is only used when the reader is in + * consuming mode, i.e. \c frag != \c NULL; + * otherwise, its value is \c 0. */ + mbedtls_mps_stored_size_t end; + /*!< The offset of the end of the last chunk + * passed to the user through a call to + * mbedtls_mps_reader_get(), relative to the first + * byte in the fragment, if no accumulator is + * present. If an accumulator is present, it is + * viewed as a prefix to the current fragment, and + * this variable contains an offset from the + * beginning of the accumulator. + * + * This is only used when the reader is in + * consuming mode, i.e. \c frag != \c NULL; + * otherwise, its value is \c 0. */ + mbedtls_mps_stored_size_t pending; + /*!< The amount of incoming data missing on the + * last call to mbedtls_mps_reader_get(). + * In particular, it is \c 0 if the last call + * was successful. + * If a reader is reclaimed after an + * unsuccessful call to mbedtls_mps_reader_get(), + * this variable is used to have the reader + * remember how much data should be accumulated + * so that the call to mbedtls_mps_reader_get() + * succeeds next time. + * This is only used when the reader is in + * consuming mode, i.e. \c frag != \c NULL; + * otherwise, its value is \c 0. */ + + /* The accumulator is only needed if we need to be able to pause + * the reader. A few bytes could be saved by moving this to a + * separate struct and using a pointer here. */ + + unsigned char *acc; /*!< The accumulator is used to gather incoming + * data if a read-request via mbedtls_mps_reader_get() + * cannot be served from the current fragment. */ + mbedtls_mps_stored_size_t acc_len; + /*!< The total size of the accumulator. */ + mbedtls_mps_stored_size_t acc_available; + /*!< The number of bytes currently gathered in + * the accumulator. This is both used in + * producing and in consuming mode: + * While producing, it is increased until + * it reaches the value of \c acc_remaining below. + * While consuming, it is used to judge if a + * get request can be served from the + * accumulator or not. + * Must not be larger than \c acc_len. */ + union + { + mbedtls_mps_stored_size_t acc_remaining; + /*!< This indicates the amount of data still + * to be gathered in the accumulator. It is + * only used in producing mode. + * Must be at most acc_len - acc_available. */ + mbedtls_mps_stored_size_t frag_offset; + /*!< If an accumulator is present and in use, this + * field indicates the offset of the current + * fragment from the beginning of the + * accumulator. If no accumulator is present + * or the accumulator is not in use, this is \c 0. + * It is only used in consuming mode. + * Must not be larger than \c acc_available. */ + } acc_share; +}; + +/* + * API organization: + * A reader object is usually prepared and maintained + * by some lower layer and passed for usage to an upper + * layer, and the API naturally splits according to which + * layer is supposed to use the respective functions. + */ + +/* + * Maintenance API (Lower layer) + */ + +/** + * \brief Initialize a reader object + * + * \param reader The reader to be initialized. + * \param acc The buffer to be used as a temporary accumulator + * in case get requests through mbedtls_mps_reader_get() + * exceed the buffer provided by mbedtls_mps_reader_feed(). + * This buffer is owned by the caller and exclusive use + * for reading and writing is given to the reader for the + * duration of the reader's lifetime. It is thus the caller's + * responsibility to maintain (and not touch) the buffer for + * the lifetime of the reader, and to properly zeroize and + * free the memory after the reader has been destroyed. + * \param acc_len The size in Bytes of \p acc. + * + * \return \c 0 on success. + * \return A negative \c MBEDTLS_ERR_READER_XXX error code on failure. + */ +int mbedtls_mps_reader_init( mbedtls_mps_reader *reader, + unsigned char *acc, + mbedtls_mps_size_t acc_len ); + +/** + * \brief Free a reader object + * + * \param reader The reader to be freed. + * + * \return \c 0 on success. + * \return A negative \c MBEDTLS_ERR_READER_XXX error code on failure. + */ +int mbedtls_mps_reader_free( mbedtls_mps_reader *reader ); + +/** + * \brief Pass chunk of data for the reader to manage. + * + * \param reader The reader context to use. The reader must be + * in producing mode. + * \param buf The buffer to be managed by the reader. + * \param buflen The size in Bytes of \p buffer. + * + * \return \c 0 on success. In this case, the reader will be + * moved to consuming mode and obtains read access + * of \p buf until mbedtls_mps_reader_reclaim() + * is called. It is the responsibility of the caller + * to ensure that the \p buf persists and is not changed + * between successful calls to mbedtls_mps_reader_feed() + * and mbedtls_mps_reader_reclaim(). + * \return \c MBEDTLS_ERR_MPS_READER_NEED_MORE if more input data is + * required to fulfill a previous request to mbedtls_mps_reader_get(). + * In this case, the reader remains in producing mode and + * takes no ownership of the provided buffer (an internal copy + * is made instead). + * \return Another negative \c MBEDTLS_ERR_READER_XXX error code on + * different kinds of failures. + */ +int mbedtls_mps_reader_feed( mbedtls_mps_reader *reader, + unsigned char *buf, + mbedtls_mps_size_t buflen ); + +/** + * \brief Reclaim reader's access to the current input buffer. + * + * \param reader The reader context to use. The reader must be + * in consuming mode. + * \param paused If not \c NULL, the integer at address \p paused will be + * modified to indicate whether the reader has been paused + * (value \c 1) or not (value \c 0). Pausing happens if there + * is uncommitted data and a previous request to + * mbedtls_mps_reader_get() has exceeded the bounds of the + * input buffer. + * + * \return \c 0 on success. + * \return A negative \c MBEDTLS_ERR_READER_XXX error code on failure. + */ +int mbedtls_mps_reader_reclaim( mbedtls_mps_reader *reader, + int *paused ); + +/* + * Usage API (Upper layer) + */ + +/** + * \brief Request data from the reader. + * + * \param reader The reader context to use. The reader must + * be in consuming mode. + * \param desired The desired amount of data to be read, in Bytes. + * \param buffer The address to store the buffer pointer in. + * This must not be \c NULL. + * \param buflen The address to store the actual buffer + * length in, or \c NULL. + * + * \return \c 0 on success. In this case, \c *buf holds the + * address of a buffer of size \c *buflen + * (if \c buflen != \c NULL) or \c desired + * (if \c buflen == \c NULL). The user has read access + * to the buffer and guarantee of stability of the data + * until the next call to mbedtls_mps_reader_reclaim(). + * \return #MBEDTLS_ERR_MPS_READER_OUT_OF_DATA if there is not enough + * data available to serve the get request. In this case, the + * reader remains intact and in consuming mode, and the consumer + * should retry the call after a successful cycle of + * mbedtls_mps_reader_reclaim() and mbedtls_mps_reader_feed(). + * If, after such a cycle, the consumer requests a different + * amount of data, the result is implementation-defined; + * progress is guaranteed only if the same amount of data + * is requested after a mbedtls_mps_reader_reclaim() and + * mbedtls_mps_reader_feed() cycle. + * \return Another negative \c MBEDTLS_ERR_READER_XXX error + * code for different kinds of failure. + * + * \note Passing \c NULL as \p buflen is a convenient way to + * indicate that fragmentation is not tolerated. + * It's functionally equivalent to passing a valid + * address as buflen and checking \c *buflen == \c desired + * afterwards. + */ +int mbedtls_mps_reader_get( mbedtls_mps_reader *reader, + mbedtls_mps_size_t desired, + unsigned char **buffer, + mbedtls_mps_size_t *buflen ); + +/** + * \brief Mark data obtained from mbedtls_mps_reader_get() as processed. + * + * This call indicates that all data received from prior calls to + * mbedtls_mps_reader_get() has been or will have been + * processed when mbedtls_mps_reader_reclaim() is called, + * and thus need not be backed up. + * + * This function has no user observable effect until + * mbedtls_mps_reader_reclaim() is called. In particular, + * buffers received from mbedtls_mps_reader_get() remain + * valid until mbedtls_mps_reader_reclaim() is called. + * + * \param reader The reader context to use. + * + * \return \c 0 on success. + * \return A negative \c MBEDTLS_ERR_READER_XXX error code on failure. + * + */ +int mbedtls_mps_reader_commit( mbedtls_mps_reader *reader ); + +#endif /* MBEDTLS_READER_H */ |