diff options
Diffstat (limited to 'thirdparty/icu4c/common/ucnv_ext.h')
| -rw-r--r-- | thirdparty/icu4c/common/ucnv_ext.h | 481 |
1 files changed, 481 insertions, 0 deletions
diff --git a/thirdparty/icu4c/common/ucnv_ext.h b/thirdparty/icu4c/common/ucnv_ext.h new file mode 100644 index 0000000000..dceea7ef12 --- /dev/null +++ b/thirdparty/icu4c/common/ucnv_ext.h @@ -0,0 +1,481 @@ +// © 2016 and later: Unicode, Inc. and others. +// License & terms of use: http://www.unicode.org/copyright.html +/* +****************************************************************************** +* +* Copyright (C) 2003-2013, International Business Machines +* Corporation and others. All Rights Reserved. +* +****************************************************************************** +* file name: ucnv_ext.h +* encoding: UTF-8 +* tab size: 8 (not used) +* indentation:4 +* +* created on: 2003jun13 +* created by: Markus W. Scherer +* +* Conversion extensions +*/ + +#ifndef __UCNV_EXT_H__ +#define __UCNV_EXT_H__ + +#include "unicode/utypes.h" + +#if !UCONFIG_NO_CONVERSION + +#include "unicode/ucnv.h" +#include "ucnv_cnv.h" + +/* + * See icuhtml/design/conversion/conversion_extensions.html + * + * Conversion extensions serve three purposes: + * 1. They support m:n mappings. + * 2. They support extension-only conversion files that are used together + * with the regular conversion data in base files. + * 3. They support mappings with more complicated meta data, + * for example "good one-way" mappings (|4). + * + * A base file may contain an extension table (explicitly requested or + * implicitly generated for m:n mappings), but its extension table is not + * used when an extension-only file is used. + * + * It is an error if a base file contains any regular (not extension) mapping + * from the same sequence as a mapping in the extension file + * because the base mapping would hide the extension mapping. + * + * + * Data for conversion extensions: + * + * One set of data structures per conversion direction (to/from Unicode). + * The data structures are sorted by input units to allow for binary search. + * Input sequences of more than one unit are handled like contraction tables + * in collation: + * The lookup value of a unit points to another table that is to be searched + * for the next unit, recursively. + * + * For conversion from Unicode, the initial code point is looked up in + * a 3-stage trie for speed, + * with an additional table of unique results to save space. + * + * Long output strings are stored in separate arrays, with length and index + * in the lookup tables. + * Output results also include a flag distinguishing roundtrip from + * (reverse) fallback mappings. + * + * Input Unicode strings must not begin or end with unpaired surrogates + * to avoid problems with matches on parts of surrogate pairs. + * + * Mappings from multiple characters (code points or codepage state + * table sequences) must be searched preferring the longest match. + * For this to work and be efficient, the variable-width table must contain + * all mappings that contain prefixes of the multiple characters. + * If an extension table is built on top of a base table in another file + * and a base table entry is a prefix of a multi-character mapping, then + * this is an error. + * + * + * Implementation note: + * + * Currently, the parser and several checks in the code limit the number + * of UChars or bytes in a mapping to + * UCNV_EXT_MAX_UCHARS and UCNV_EXT_MAX_BYTES, respectively, + * which are output value limits in the data structure. + * + * For input, this is not strictly necessary - it is a hard limit only for the + * buffers in UConverter that are used to store partial matches. + * + * Input sequences could otherwise be arbitrarily long if partial matches + * need not be stored (i.e., if a sequence does not span several buffers with too + * many units before the last buffer), although then results would differ + * depending on whether partial matches exceed the limits or not, + * which depends on the pattern of buffer sizes. + * + * + * Data structure: + * + * int32_t indexes[>=32]; + * + * Array of indexes and lengths etc. The length of the array is at least 32. + * The actual length is stored in indexes[0] to be forward compatible. + * + * Each index to another array is the number of bytes from indexes[]. + * Each length of an array is the number of array base units in that array. + * + * Some of the structures may not be present, in which case their indexes + * and lengths are 0. + * + * Usage of indexes[i]: + * [0] length of indexes[] + * + * // to Unicode table + * [1] index of toUTable[] (array of uint32_t) + * [2] length of toUTable[] + * [3] index of toUUChars[] (array of UChar) + * [4] length of toUUChars[] + * + * // from Unicode table, not for the initial code point + * [5] index of fromUTableUChars[] (array of UChar) + * [6] index of fromUTableValues[] (array of uint32_t) + * [7] length of fromUTableUChars[] and fromUTableValues[] + * [8] index of fromUBytes[] (array of char) + * [9] length of fromUBytes[] + * + * // from Unicode trie for initial-code point lookup + * [10] index of fromUStage12[] (combined array of uint16_t for stages 1 & 2) + * [11] length of stage 1 portion of fromUStage12[] + * [12] length of fromUStage12[] + * [13] index of fromUStage3[] (array of uint16_t indexes into fromUStage3b[]) + * [14] length of fromUStage3[] + * [15] index of fromUStage3b[] (array of uint32_t like fromUTableValues[]) + * [16] length of fromUStage3b[] + * + * [17] Bit field containing numbers of bytes: + * 31..24 reserved, 0 + * 23..16 maximum input bytes + * 15.. 8 maximum output bytes + * 7.. 0 maximum bytes per UChar + * + * [18] Bit field containing numbers of UChars: + * 31..24 reserved, 0 + * 23..16 maximum input UChars + * 15.. 8 maximum output UChars + * 7.. 0 maximum UChars per byte + * + * [19] Bit field containing flags: + * (extension table unicodeMask) + * 1 UCNV_HAS_SURROGATES flag for the extension table + * 0 UCNV_HAS_SUPPLEMENTARY flag for the extension table + * + * [20]..[30] reserved, 0 + * [31] number of bytes for the entire extension structure + * [>31] reserved; there are indexes[0] indexes + * + * + * uint32_t toUTable[]; + * + * Array of byte/value pairs for lookups for toUnicode conversion. + * The array is partitioned into sections like collation contraction tables. + * Each section contains one word with the number of following words and + * a default value for when the lookup in this section yields no match. + * + * A section is sorted in ascending order of input bytes, + * allowing for fast linear or binary searches. + * The builder may store entries for a contiguous range of byte values + * (compare difference between the first and last one with count), + * which then allows for direct array access. + * The builder should always do this for the initial table section. + * + * Entries may have 0 values, see below. + * No two entries in a section have the same byte values. + * + * Each uint32_t contains an input byte value in bits 31..24 and the + * corresponding lookup value in bits 23..0. + * Interpret the value as follows: + * if(value==0) { + * no match, see below + * } else if(value<0x1f0000) { + * partial match - use value as index to the next toUTable section + * and match the next unit; (value indexes toUTable[value]) + * } else { + * if(bit 23 set) { + * roundtrip; + * } else { + * fallback; + * } + * unset value bit 23; + * if(value<=0x2fffff) { + * (value-0x1f0000) is a code point; (BMP: value<=0x1fffff) + * } else { + * bits 17..0 (value&0x3ffff) is an index to + * the result UChars in toUUChars[]; (0 indexes toUUChars[0]) + * length of the result=((value>>18)-12); (length=0..19) + * } + * } + * + * The first word in a section contains the number of following words in the + * input byte position (bits 31..24, number=1..0xff). + * The value of the initial word is used when the current byte is not found + * in this section. + * If the value is not 0, then it represents a result as above. + * If the value is 0, then the search has to return a shorter match with an + * earlier default value as the result, or result in "unmappable" even for the + * initial bytes. + * If the value is 0 for the initial toUTable entry, then the initial byte + * does not start any mapping input. + * + * + * UChar toUUChars[]; + * + * Contains toUnicode mapping results, stored as sequences of UChars. + * Indexes and lengths stored in the toUTable[]. + * + * + * UChar fromUTableUChars[]; + * uint32_t fromUTableValues[]; + * + * The fromUTable is split into two arrays, but works otherwise much like + * the toUTable. The array is partitioned into sections like collation + * contraction tables and toUTable. + * A row in the table consists of same-index entries in fromUTableUChars[] + * and fromUTableValues[]. + * + * Interpret a value as follows: + * if(value==0) { + * no match, see below + * } else if(value<=0xffffff) { (bits 31..24 are 0) + * partial match - use value as index to the next fromUTable section + * and match the next unit; (value indexes fromUTable[value]) + * } else { + * if(value==0x80000001) { + * return no mapping, but request for <subchar1>; + * } + * if(bit 31 set) { + * roundtrip (|0); + * } else if(bit 30 set) { + * "good one-way" mapping (|4); -- new in ICU4C 51, _MBCSHeader.version 5.4/4.4 + * } else { + * normal fallback (|1); + * } + * // bit 29 reserved, 0 + * length=(value>>24)&0x1f; (bits 28..24) + * if(length==1..3) { + * bits 23..0 contain 1..3 bytes, padded with 00s on the left; + * } else { + * bits 23..0 (value&0xffffff) is an index to + * the result bytes in fromUBytes[]; (0 indexes fromUBytes[0]) + * } + * } + * + * The first pair in a section contains the number of following pairs in the + * UChar position (16 bits, number=1..0xffff). + * The value of the initial pair is used when the current UChar is not found + * in this section. + * If the value is not 0, then it represents a result as above. + * If the value is 0, then the search has to return a shorter match with an + * earlier default value as the result, or result in "unmappable" even for the + * initial UChars. + * + * If the from Unicode trie is present, then the from Unicode search tables + * are not used for initial code points. + * In this case, the first entries (index 0) in the tables are not used + * (reserved, set to 0) because a value of 0 is used in trie results + * to indicate no mapping. + * + * + * uint16_t fromUStage12[]; + * + * Stages 1 & 2 of a trie that maps an initial code point. + * Indexes in stage 1 are all offset by the length of stage 1 so that the + * same array pointer can be used for both stages. + * If (c>>10)>=(length of stage 1) then c does not start any mapping. + * Same bit distribution as for regular conversion tries. + * + * + * uint16_t fromUStage3[]; + * uint32_t fromUStage3b[]; + * + * Stage 3 of the trie. The first array simply contains indexes to the second, + * which contains words in the same format as fromUTableValues[]. + * Use a stage 3 granularity of 4, which allows for 256k stage 3 entries, + * and 16-bit entries in stage 3 allow for 64k stage 3b entries. + * The stage 3 granularity means that the stage 2 entry needs to be left-shifted. + * + * Two arrays are used because it is expected that more than half of the stage 3 + * entries will be zero. The 16-bit index stage 3 array saves space even + * considering storing a total of 6 bytes per non-zero entry in both arrays + * together. + * Using a stage 3 granularity of >1 diminishes the compactability in that stage + * but provides a larger effective addressing space in stage 2. + * All but the final result stage use 16-bit entries to save space. + * + * fromUStage3b[] contains a zero for "no mapping" at its index 0, + * and may contain UCNV_EXT_FROM_U_SUBCHAR1 at index 1 for "<subchar1> SUB mapping" + * (i.e., "no mapping" with preference for <subchar1> rather than <subchar>), + * and all other items are unique non-zero results. + * + * The default value of a fromUTableValues[] section that is referenced + * _directly_ from a fromUStage3b[] item may also be UCNV_EXT_FROM_U_SUBCHAR1, + * but this value must not occur anywhere else in fromUTableValues[] + * because "no mapping" is always a property of a single code point, + * never of multiple. + * + * + * char fromUBytes[]; + * + * Contains fromUnicode mapping results, stored as sequences of chars. + * Indexes and lengths stored in the fromUTableValues[]. + */ +enum { + UCNV_EXT_INDEXES_LENGTH, /* 0 */ + + UCNV_EXT_TO_U_INDEX, /* 1 */ + UCNV_EXT_TO_U_LENGTH, + UCNV_EXT_TO_U_UCHARS_INDEX, + UCNV_EXT_TO_U_UCHARS_LENGTH, + + UCNV_EXT_FROM_U_UCHARS_INDEX, /* 5 */ + UCNV_EXT_FROM_U_VALUES_INDEX, + UCNV_EXT_FROM_U_LENGTH, + UCNV_EXT_FROM_U_BYTES_INDEX, + UCNV_EXT_FROM_U_BYTES_LENGTH, + + UCNV_EXT_FROM_U_STAGE_12_INDEX, /* 10 */ + UCNV_EXT_FROM_U_STAGE_1_LENGTH, + UCNV_EXT_FROM_U_STAGE_12_LENGTH, + UCNV_EXT_FROM_U_STAGE_3_INDEX, + UCNV_EXT_FROM_U_STAGE_3_LENGTH, + UCNV_EXT_FROM_U_STAGE_3B_INDEX, + UCNV_EXT_FROM_U_STAGE_3B_LENGTH, + + UCNV_EXT_COUNT_BYTES, /* 17 */ + UCNV_EXT_COUNT_UCHARS, + UCNV_EXT_FLAGS, + + UCNV_EXT_RESERVED_INDEX, /* 20, moves with additional indexes */ + + UCNV_EXT_SIZE=31, + UCNV_EXT_INDEXES_MIN_LENGTH=32 +}; + +/* get the pointer to an extension array from indexes[index] */ +#define UCNV_EXT_ARRAY(indexes, index, itemType) \ + ((const itemType *)((const char *)(indexes)+(indexes)[index])) + +#define UCNV_GET_MAX_BYTES_PER_UCHAR(indexes) \ + ((indexes)[UCNV_EXT_COUNT_BYTES]&0xff) + +/* internal API ------------------------------------------------------------- */ + +U_CFUNC UBool +ucnv_extInitialMatchToU(UConverter *cnv, const int32_t *cx, + int32_t firstLength, + const char **src, const char *srcLimit, + UChar **target, const UChar *targetLimit, + int32_t **offsets, int32_t srcIndex, + UBool flush, + UErrorCode *pErrorCode); + +U_CFUNC UChar32 +ucnv_extSimpleMatchToU(const int32_t *cx, + const char *source, int32_t length, + UBool useFallback); + +U_CFUNC void +ucnv_extContinueMatchToU(UConverter *cnv, + UConverterToUnicodeArgs *pArgs, int32_t srcIndex, + UErrorCode *pErrorCode); + + +U_CFUNC UBool +ucnv_extInitialMatchFromU(UConverter *cnv, const int32_t *cx, + UChar32 cp, + const UChar **src, const UChar *srcLimit, + char **target, const char *targetLimit, + int32_t **offsets, int32_t srcIndex, + UBool flush, + UErrorCode *pErrorCode); + +U_CFUNC int32_t +ucnv_extSimpleMatchFromU(const int32_t *cx, + UChar32 cp, uint32_t *pValue, + UBool useFallback); + +U_CFUNC void +ucnv_extContinueMatchFromU(UConverter *cnv, + UConverterFromUnicodeArgs *pArgs, int32_t srcIndex, + UErrorCode *pErrorCode); + +/* + * Add code points and strings to the set according to the extension mappings. + * Limitation on the UConverterSetFilter: + * The filters currently assume that they are used with 1:1 mappings. + * They only apply to single input code points, and then they pass through + * only mappings with single-charset-code results. + * For example, the Shift-JIS filter only works for 2-byte results and tests + * that those 2 bytes are in the JIS X 0208 range of Shift-JIS. + */ +U_CFUNC void +ucnv_extGetUnicodeSet(const UConverterSharedData *sharedData, + const USetAdder *sa, + UConverterUnicodeSet which, + UConverterSetFilter filter, + UErrorCode *pErrorCode); + +/* toUnicode helpers -------------------------------------------------------- */ + +#define UCNV_EXT_TO_U_BYTE_SHIFT 24 +#define UCNV_EXT_TO_U_VALUE_MASK 0xffffff +#define UCNV_EXT_TO_U_MIN_CODE_POINT 0x1f0000 +#define UCNV_EXT_TO_U_MAX_CODE_POINT 0x2fffff +#define UCNV_EXT_TO_U_ROUNDTRIP_FLAG ((uint32_t)1<<23) +#define UCNV_EXT_TO_U_INDEX_MASK 0x3ffff +#define UCNV_EXT_TO_U_LENGTH_SHIFT 18 +#define UCNV_EXT_TO_U_LENGTH_OFFSET 12 + +/* maximum number of indexed UChars */ +#define UCNV_EXT_MAX_UCHARS 19 + +#define UCNV_EXT_TO_U_MAKE_WORD(byte, value) (((uint32_t)(byte)<<UCNV_EXT_TO_U_BYTE_SHIFT)|(value)) + +#define UCNV_EXT_TO_U_GET_BYTE(word) ((word)>>UCNV_EXT_TO_U_BYTE_SHIFT) +#define UCNV_EXT_TO_U_GET_VALUE(word) ((word)&UCNV_EXT_TO_U_VALUE_MASK) + +#define UCNV_EXT_TO_U_IS_PARTIAL(value) ((value)<UCNV_EXT_TO_U_MIN_CODE_POINT) +#define UCNV_EXT_TO_U_GET_PARTIAL_INDEX(value) (value) + +#define UCNV_EXT_TO_U_IS_ROUNDTRIP(value) (((value)&UCNV_EXT_TO_U_ROUNDTRIP_FLAG)!=0) +#define UCNV_EXT_TO_U_MASK_ROUNDTRIP(value) ((value)&~UCNV_EXT_TO_U_ROUNDTRIP_FLAG) + +/* use after masking off the roundtrip flag */ +#define UCNV_EXT_TO_U_IS_CODE_POINT(value) ((value)<=UCNV_EXT_TO_U_MAX_CODE_POINT) +#define UCNV_EXT_TO_U_GET_CODE_POINT(value) ((value)-UCNV_EXT_TO_U_MIN_CODE_POINT) + +#define UCNV_EXT_TO_U_GET_INDEX(value) ((value)&UCNV_EXT_TO_U_INDEX_MASK) +#define UCNV_EXT_TO_U_GET_LENGTH(value) (((value)>>UCNV_EXT_TO_U_LENGTH_SHIFT)-UCNV_EXT_TO_U_LENGTH_OFFSET) + +/* fromUnicode helpers ------------------------------------------------------ */ + +/* most trie constants are shared with ucnvmbcs.h */ + +/* see similar utrie.h UTRIE_INDEX_SHIFT and UTRIE_DATA_GRANULARITY */ +#define UCNV_EXT_STAGE_2_LEFT_SHIFT 2 +#define UCNV_EXT_STAGE_3_GRANULARITY 4 + +/* trie access, returns the stage 3 value=index to stage 3b; s1Index=c>>10 */ +#define UCNV_EXT_FROM_U(stage12, stage3, s1Index, c) \ + (stage3)[ ((int32_t)(stage12)[ (stage12)[s1Index] +(((c)>>4)&0x3f) ]<<UCNV_EXT_STAGE_2_LEFT_SHIFT) +((c)&0xf) ] + +#define UCNV_EXT_FROM_U_LENGTH_SHIFT 24 +#define UCNV_EXT_FROM_U_ROUNDTRIP_FLAG ((uint32_t)1<<31) +#define UCNV_EXT_FROM_U_GOOD_ONE_WAY_FLAG 0x40000000 +#define UCNV_EXT_FROM_U_STATUS_MASK 0xc0000000 +#define UCNV_EXT_FROM_U_RESERVED_MASK 0x20000000 +#define UCNV_EXT_FROM_U_DATA_MASK 0xffffff + +/* special value for "no mapping" to <subchar1> (impossible roundtrip to 0 bytes, value 01) */ +#define UCNV_EXT_FROM_U_SUBCHAR1 0x80000001 + +/* at most 3 bytes in the lower part of the value */ +#define UCNV_EXT_FROM_U_MAX_DIRECT_LENGTH 3 + +/* maximum number of indexed bytes */ +#define UCNV_EXT_MAX_BYTES 0x1f + +#define UCNV_EXT_FROM_U_IS_PARTIAL(value) (((value)>>UCNV_EXT_FROM_U_LENGTH_SHIFT)==0) +#define UCNV_EXT_FROM_U_GET_PARTIAL_INDEX(value) (value) + +#define UCNV_EXT_FROM_U_IS_ROUNDTRIP(value) (((value)&UCNV_EXT_FROM_U_ROUNDTRIP_FLAG)!=0) +#define UCNV_EXT_FROM_U_MASK_ROUNDTRIP(value) ((value)&~UCNV_EXT_FROM_U_ROUNDTRIP_FLAG) + +/* get length; masks away all other bits */ +#define UCNV_EXT_FROM_U_GET_LENGTH(value) (int32_t)(((value)>>UCNV_EXT_FROM_U_LENGTH_SHIFT)&UCNV_EXT_MAX_BYTES) + +/* get bytes or bytes index */ +#define UCNV_EXT_FROM_U_GET_DATA(value) ((value)&UCNV_EXT_FROM_U_DATA_MASK) + +#endif + +#endif |