diff options
Diffstat (limited to 'thirdparty/bullet/src/BulletDynamics/ConstraintSolver/btHingeConstraint.cpp')
| -rw-r--r-- | thirdparty/bullet/src/BulletDynamics/ConstraintSolver/btHingeConstraint.cpp | 1120 |
1 files changed, 0 insertions, 1120 deletions
diff --git a/thirdparty/bullet/src/BulletDynamics/ConstraintSolver/btHingeConstraint.cpp b/thirdparty/bullet/src/BulletDynamics/ConstraintSolver/btHingeConstraint.cpp deleted file mode 100644 index 7e5e6f9e54..0000000000 --- a/thirdparty/bullet/src/BulletDynamics/ConstraintSolver/btHingeConstraint.cpp +++ /dev/null @@ -1,1120 +0,0 @@ -/* -Bullet Continuous Collision Detection and Physics Library -Copyright (c) 2003-2006 Erwin Coumans http://continuousphysics.com/Bullet/ - -This software is provided 'as-is', without any express or implied warranty. -In no event will the authors be held liable for any damages arising from the use of this software. -Permission is granted to anyone to use this software for any purpose, -including commercial applications, and to alter it and redistribute it freely, -subject to the following restrictions: - -1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. -2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. -3. This notice may not be removed or altered from any source distribution. -*/ - - -#include "btHingeConstraint.h" -#include "BulletDynamics/Dynamics/btRigidBody.h" -#include "LinearMath/btTransformUtil.h" -#include "LinearMath/btMinMax.h" -#include <new> -#include "btSolverBody.h" - - - -//#define HINGE_USE_OBSOLETE_SOLVER false -#define HINGE_USE_OBSOLETE_SOLVER false - -#define HINGE_USE_FRAME_OFFSET true - -#ifndef __SPU__ - - - - - -btHingeConstraint::btHingeConstraint(btRigidBody& rbA,btRigidBody& rbB, const btVector3& pivotInA,const btVector3& pivotInB, - const btVector3& axisInA,const btVector3& axisInB, bool useReferenceFrameA) - :btTypedConstraint(HINGE_CONSTRAINT_TYPE, rbA,rbB), -#ifdef _BT_USE_CENTER_LIMIT_ - m_limit(), -#endif - m_angularOnly(false), - m_enableAngularMotor(false), - m_useSolveConstraintObsolete(HINGE_USE_OBSOLETE_SOLVER), - m_useOffsetForConstraintFrame(HINGE_USE_FRAME_OFFSET), - m_useReferenceFrameA(useReferenceFrameA), - m_flags(0), - m_normalCFM(0), - m_normalERP(0), - m_stopCFM(0), - m_stopERP(0) -{ - m_rbAFrame.getOrigin() = pivotInA; - - // since no frame is given, assume this to be zero angle and just pick rb transform axis - btVector3 rbAxisA1 = rbA.getCenterOfMassTransform().getBasis().getColumn(0); - - btVector3 rbAxisA2; - btScalar projection = axisInA.dot(rbAxisA1); - if (projection >= 1.0f - SIMD_EPSILON) { - rbAxisA1 = -rbA.getCenterOfMassTransform().getBasis().getColumn(2); - rbAxisA2 = rbA.getCenterOfMassTransform().getBasis().getColumn(1); - } else if (projection <= -1.0f + SIMD_EPSILON) { - rbAxisA1 = rbA.getCenterOfMassTransform().getBasis().getColumn(2); - rbAxisA2 = rbA.getCenterOfMassTransform().getBasis().getColumn(1); - } else { - rbAxisA2 = axisInA.cross(rbAxisA1); - rbAxisA1 = rbAxisA2.cross(axisInA); - } - - m_rbAFrame.getBasis().setValue( rbAxisA1.getX(),rbAxisA2.getX(),axisInA.getX(), - rbAxisA1.getY(),rbAxisA2.getY(),axisInA.getY(), - rbAxisA1.getZ(),rbAxisA2.getZ(),axisInA.getZ() ); - - btQuaternion rotationArc = shortestArcQuat(axisInA,axisInB); - btVector3 rbAxisB1 = quatRotate(rotationArc,rbAxisA1); - btVector3 rbAxisB2 = axisInB.cross(rbAxisB1); - - m_rbBFrame.getOrigin() = pivotInB; - m_rbBFrame.getBasis().setValue( rbAxisB1.getX(),rbAxisB2.getX(),axisInB.getX(), - rbAxisB1.getY(),rbAxisB2.getY(),axisInB.getY(), - rbAxisB1.getZ(),rbAxisB2.getZ(),axisInB.getZ() ); - -#ifndef _BT_USE_CENTER_LIMIT_ - //start with free - m_lowerLimit = btScalar(1.0f); - m_upperLimit = btScalar(-1.0f); - m_biasFactor = 0.3f; - m_relaxationFactor = 1.0f; - m_limitSoftness = 0.9f; - m_solveLimit = false; -#endif - m_referenceSign = m_useReferenceFrameA ? btScalar(-1.f) : btScalar(1.f); -} - - - -btHingeConstraint::btHingeConstraint(btRigidBody& rbA,const btVector3& pivotInA,const btVector3& axisInA, bool useReferenceFrameA) -:btTypedConstraint(HINGE_CONSTRAINT_TYPE, rbA), -#ifdef _BT_USE_CENTER_LIMIT_ -m_limit(), -#endif -m_angularOnly(false), m_enableAngularMotor(false), -m_useSolveConstraintObsolete(HINGE_USE_OBSOLETE_SOLVER), -m_useOffsetForConstraintFrame(HINGE_USE_FRAME_OFFSET), -m_useReferenceFrameA(useReferenceFrameA), -m_flags(0), -m_normalCFM(0), -m_normalERP(0), -m_stopCFM(0), -m_stopERP(0) -{ - - // since no frame is given, assume this to be zero angle and just pick rb transform axis - // fixed axis in worldspace - btVector3 rbAxisA1, rbAxisA2; - btPlaneSpace1(axisInA, rbAxisA1, rbAxisA2); - - m_rbAFrame.getOrigin() = pivotInA; - m_rbAFrame.getBasis().setValue( rbAxisA1.getX(),rbAxisA2.getX(),axisInA.getX(), - rbAxisA1.getY(),rbAxisA2.getY(),axisInA.getY(), - rbAxisA1.getZ(),rbAxisA2.getZ(),axisInA.getZ() ); - - btVector3 axisInB = rbA.getCenterOfMassTransform().getBasis() * axisInA; - - btQuaternion rotationArc = shortestArcQuat(axisInA,axisInB); - btVector3 rbAxisB1 = quatRotate(rotationArc,rbAxisA1); - btVector3 rbAxisB2 = axisInB.cross(rbAxisB1); - - - m_rbBFrame.getOrigin() = rbA.getCenterOfMassTransform()(pivotInA); - m_rbBFrame.getBasis().setValue( rbAxisB1.getX(),rbAxisB2.getX(),axisInB.getX(), - rbAxisB1.getY(),rbAxisB2.getY(),axisInB.getY(), - rbAxisB1.getZ(),rbAxisB2.getZ(),axisInB.getZ() ); - -#ifndef _BT_USE_CENTER_LIMIT_ - //start with free - m_lowerLimit = btScalar(1.0f); - m_upperLimit = btScalar(-1.0f); - m_biasFactor = 0.3f; - m_relaxationFactor = 1.0f; - m_limitSoftness = 0.9f; - m_solveLimit = false; -#endif - m_referenceSign = m_useReferenceFrameA ? btScalar(-1.f) : btScalar(1.f); -} - - - -btHingeConstraint::btHingeConstraint(btRigidBody& rbA,btRigidBody& rbB, - const btTransform& rbAFrame, const btTransform& rbBFrame, bool useReferenceFrameA) -:btTypedConstraint(HINGE_CONSTRAINT_TYPE, rbA,rbB),m_rbAFrame(rbAFrame),m_rbBFrame(rbBFrame), -#ifdef _BT_USE_CENTER_LIMIT_ -m_limit(), -#endif -m_angularOnly(false), -m_enableAngularMotor(false), -m_useSolveConstraintObsolete(HINGE_USE_OBSOLETE_SOLVER), -m_useOffsetForConstraintFrame(HINGE_USE_FRAME_OFFSET), -m_useReferenceFrameA(useReferenceFrameA), -m_flags(0), -m_normalCFM(0), -m_normalERP(0), -m_stopCFM(0), -m_stopERP(0) -{ -#ifndef _BT_USE_CENTER_LIMIT_ - //start with free - m_lowerLimit = btScalar(1.0f); - m_upperLimit = btScalar(-1.0f); - m_biasFactor = 0.3f; - m_relaxationFactor = 1.0f; - m_limitSoftness = 0.9f; - m_solveLimit = false; -#endif - m_referenceSign = m_useReferenceFrameA ? btScalar(-1.f) : btScalar(1.f); -} - - - -btHingeConstraint::btHingeConstraint(btRigidBody& rbA, const btTransform& rbAFrame, bool useReferenceFrameA) -:btTypedConstraint(HINGE_CONSTRAINT_TYPE, rbA),m_rbAFrame(rbAFrame),m_rbBFrame(rbAFrame), -#ifdef _BT_USE_CENTER_LIMIT_ -m_limit(), -#endif -m_angularOnly(false), -m_enableAngularMotor(false), -m_useSolveConstraintObsolete(HINGE_USE_OBSOLETE_SOLVER), -m_useOffsetForConstraintFrame(HINGE_USE_FRAME_OFFSET), -m_useReferenceFrameA(useReferenceFrameA), -m_flags(0), -m_normalCFM(0), -m_normalERP(0), -m_stopCFM(0), -m_stopERP(0) -{ - ///not providing rigidbody B means implicitly using worldspace for body B - - m_rbBFrame.getOrigin() = m_rbA.getCenterOfMassTransform()(m_rbAFrame.getOrigin()); -#ifndef _BT_USE_CENTER_LIMIT_ - //start with free - m_lowerLimit = btScalar(1.0f); - m_upperLimit = btScalar(-1.0f); - m_biasFactor = 0.3f; - m_relaxationFactor = 1.0f; - m_limitSoftness = 0.9f; - m_solveLimit = false; -#endif - m_referenceSign = m_useReferenceFrameA ? btScalar(-1.f) : btScalar(1.f); -} - - - -void btHingeConstraint::buildJacobian() -{ - if (m_useSolveConstraintObsolete) - { - m_appliedImpulse = btScalar(0.); - m_accMotorImpulse = btScalar(0.); - - if (!m_angularOnly) - { - btVector3 pivotAInW = m_rbA.getCenterOfMassTransform()*m_rbAFrame.getOrigin(); - btVector3 pivotBInW = m_rbB.getCenterOfMassTransform()*m_rbBFrame.getOrigin(); - btVector3 relPos = pivotBInW - pivotAInW; - - btVector3 normal[3]; - if (relPos.length2() > SIMD_EPSILON) - { - normal[0] = relPos.normalized(); - } - else - { - normal[0].setValue(btScalar(1.0),0,0); - } - - btPlaneSpace1(normal[0], normal[1], normal[2]); - - for (int i=0;i<3;i++) - { - new (&m_jac[i]) btJacobianEntry( - m_rbA.getCenterOfMassTransform().getBasis().transpose(), - m_rbB.getCenterOfMassTransform().getBasis().transpose(), - pivotAInW - m_rbA.getCenterOfMassPosition(), - pivotBInW - m_rbB.getCenterOfMassPosition(), - normal[i], - m_rbA.getInvInertiaDiagLocal(), - m_rbA.getInvMass(), - m_rbB.getInvInertiaDiagLocal(), - m_rbB.getInvMass()); - } - } - - //calculate two perpendicular jointAxis, orthogonal to hingeAxis - //these two jointAxis require equal angular velocities for both bodies - - //this is unused for now, it's a todo - btVector3 jointAxis0local; - btVector3 jointAxis1local; - - btPlaneSpace1(m_rbAFrame.getBasis().getColumn(2),jointAxis0local,jointAxis1local); - - btVector3 jointAxis0 = getRigidBodyA().getCenterOfMassTransform().getBasis() * jointAxis0local; - btVector3 jointAxis1 = getRigidBodyA().getCenterOfMassTransform().getBasis() * jointAxis1local; - btVector3 hingeAxisWorld = getRigidBodyA().getCenterOfMassTransform().getBasis() * m_rbAFrame.getBasis().getColumn(2); - - new (&m_jacAng[0]) btJacobianEntry(jointAxis0, - m_rbA.getCenterOfMassTransform().getBasis().transpose(), - m_rbB.getCenterOfMassTransform().getBasis().transpose(), - m_rbA.getInvInertiaDiagLocal(), - m_rbB.getInvInertiaDiagLocal()); - - new (&m_jacAng[1]) btJacobianEntry(jointAxis1, - m_rbA.getCenterOfMassTransform().getBasis().transpose(), - m_rbB.getCenterOfMassTransform().getBasis().transpose(), - m_rbA.getInvInertiaDiagLocal(), - m_rbB.getInvInertiaDiagLocal()); - - new (&m_jacAng[2]) btJacobianEntry(hingeAxisWorld, - m_rbA.getCenterOfMassTransform().getBasis().transpose(), - m_rbB.getCenterOfMassTransform().getBasis().transpose(), - m_rbA.getInvInertiaDiagLocal(), - m_rbB.getInvInertiaDiagLocal()); - - // clear accumulator - m_accLimitImpulse = btScalar(0.); - - // test angular limit - testLimit(m_rbA.getCenterOfMassTransform(),m_rbB.getCenterOfMassTransform()); - - //Compute K = J*W*J' for hinge axis - btVector3 axisA = getRigidBodyA().getCenterOfMassTransform().getBasis() * m_rbAFrame.getBasis().getColumn(2); - m_kHinge = 1.0f / (getRigidBodyA().computeAngularImpulseDenominator(axisA) + - getRigidBodyB().computeAngularImpulseDenominator(axisA)); - - } -} - - -#endif //__SPU__ - - -static inline btScalar btNormalizeAnglePositive(btScalar angle) -{ - return btFmod(btFmod(angle, btScalar(2.0*SIMD_PI)) + btScalar(2.0*SIMD_PI), btScalar(2.0*SIMD_PI)); -} - - - -static btScalar btShortestAngularDistance(btScalar accAngle, btScalar curAngle) -{ - btScalar result = btNormalizeAngle(btNormalizeAnglePositive(btNormalizeAnglePositive(curAngle) - - btNormalizeAnglePositive(accAngle))); - return result; -} - -static btScalar btShortestAngleUpdate(btScalar accAngle, btScalar curAngle) -{ - btScalar tol(0.3); - btScalar result = btShortestAngularDistance(accAngle, curAngle); - - if (btFabs(result) > tol) - return curAngle; - else - return accAngle + result; - - return curAngle; -} - - -btScalar btHingeAccumulatedAngleConstraint::getAccumulatedHingeAngle() -{ - btScalar hingeAngle = getHingeAngle(); - m_accumulatedAngle = btShortestAngleUpdate(m_accumulatedAngle,hingeAngle); - return m_accumulatedAngle; -} -void btHingeAccumulatedAngleConstraint::setAccumulatedHingeAngle(btScalar accAngle) -{ - m_accumulatedAngle = accAngle; -} - -void btHingeAccumulatedAngleConstraint::getInfo1(btConstraintInfo1* info) -{ - //update m_accumulatedAngle - btScalar curHingeAngle = getHingeAngle(); - m_accumulatedAngle = btShortestAngleUpdate(m_accumulatedAngle,curHingeAngle); - - btHingeConstraint::getInfo1(info); - -} - - -void btHingeConstraint::getInfo1(btConstraintInfo1* info) -{ - - - if (m_useSolveConstraintObsolete) - { - info->m_numConstraintRows = 0; - info->nub = 0; - } - else - { - info->m_numConstraintRows = 5; // Fixed 3 linear + 2 angular - info->nub = 1; - //always add the row, to avoid computation (data is not available yet) - //prepare constraint - testLimit(m_rbA.getCenterOfMassTransform(),m_rbB.getCenterOfMassTransform()); - if(getSolveLimit() || getEnableAngularMotor()) - { - info->m_numConstraintRows++; // limit 3rd anguar as well - info->nub--; - } - - } -} - -void btHingeConstraint::getInfo1NonVirtual(btConstraintInfo1* info) -{ - if (m_useSolveConstraintObsolete) - { - info->m_numConstraintRows = 0; - info->nub = 0; - } - else - { - //always add the 'limit' row, to avoid computation (data is not available yet) - info->m_numConstraintRows = 6; // Fixed 3 linear + 2 angular - info->nub = 0; - } -} - -void btHingeConstraint::getInfo2 (btConstraintInfo2* info) -{ - if(m_useOffsetForConstraintFrame) - { - getInfo2InternalUsingFrameOffset(info, m_rbA.getCenterOfMassTransform(),m_rbB.getCenterOfMassTransform(),m_rbA.getAngularVelocity(),m_rbB.getAngularVelocity()); - } - else - { - getInfo2Internal(info, m_rbA.getCenterOfMassTransform(),m_rbB.getCenterOfMassTransform(),m_rbA.getAngularVelocity(),m_rbB.getAngularVelocity()); - } -} - - -void btHingeConstraint::getInfo2NonVirtual (btConstraintInfo2* info,const btTransform& transA,const btTransform& transB,const btVector3& angVelA,const btVector3& angVelB) -{ - ///the regular (virtual) implementation getInfo2 already performs 'testLimit' during getInfo1, so we need to do it now - testLimit(transA,transB); - - getInfo2Internal(info,transA,transB,angVelA,angVelB); -} - - -void btHingeConstraint::getInfo2Internal(btConstraintInfo2* info, const btTransform& transA,const btTransform& transB,const btVector3& angVelA,const btVector3& angVelB) -{ - - btAssert(!m_useSolveConstraintObsolete); - int i, skip = info->rowskip; - // transforms in world space - btTransform trA = transA*m_rbAFrame; - btTransform trB = transB*m_rbBFrame; - // pivot point - btVector3 pivotAInW = trA.getOrigin(); - btVector3 pivotBInW = trB.getOrigin(); -#if 0 - if (0) - { - for (i=0;i<6;i++) - { - info->m_J1linearAxis[i*skip]=0; - info->m_J1linearAxis[i*skip+1]=0; - info->m_J1linearAxis[i*skip+2]=0; - - info->m_J1angularAxis[i*skip]=0; - info->m_J1angularAxis[i*skip+1]=0; - info->m_J1angularAxis[i*skip+2]=0; - - info->m_J2linearAxis[i*skip]=0; - info->m_J2linearAxis[i*skip+1]=0; - info->m_J2linearAxis[i*skip+2]=0; - - info->m_J2angularAxis[i*skip]=0; - info->m_J2angularAxis[i*skip+1]=0; - info->m_J2angularAxis[i*skip+2]=0; - - info->m_constraintError[i*skip]=0.f; - } - } -#endif //#if 0 - // linear (all fixed) - - if (!m_angularOnly) - { - info->m_J1linearAxis[0] = 1; - info->m_J1linearAxis[skip + 1] = 1; - info->m_J1linearAxis[2 * skip + 2] = 1; - - info->m_J2linearAxis[0] = -1; - info->m_J2linearAxis[skip + 1] = -1; - info->m_J2linearAxis[2 * skip + 2] = -1; - } - - - - - btVector3 a1 = pivotAInW - transA.getOrigin(); - { - btVector3* angular0 = (btVector3*)(info->m_J1angularAxis); - btVector3* angular1 = (btVector3*)(info->m_J1angularAxis + skip); - btVector3* angular2 = (btVector3*)(info->m_J1angularAxis + 2 * skip); - btVector3 a1neg = -a1; - a1neg.getSkewSymmetricMatrix(angular0,angular1,angular2); - } - btVector3 a2 = pivotBInW - transB.getOrigin(); - { - btVector3* angular0 = (btVector3*)(info->m_J2angularAxis); - btVector3* angular1 = (btVector3*)(info->m_J2angularAxis + skip); - btVector3* angular2 = (btVector3*)(info->m_J2angularAxis + 2 * skip); - a2.getSkewSymmetricMatrix(angular0,angular1,angular2); - } - // linear RHS - btScalar normalErp = (m_flags & BT_HINGE_FLAGS_ERP_NORM) ? m_normalERP : info->erp; - - btScalar k = info->fps * normalErp; - if (!m_angularOnly) - { - for(i = 0; i < 3; i++) - { - info->m_constraintError[i * skip] = k * (pivotBInW[i] - pivotAInW[i]); - } - } - // make rotations around X and Y equal - // the hinge axis should be the only unconstrained - // rotational axis, the angular velocity of the two bodies perpendicular to - // the hinge axis should be equal. thus the constraint equations are - // p*w1 - p*w2 = 0 - // q*w1 - q*w2 = 0 - // where p and q are unit vectors normal to the hinge axis, and w1 and w2 - // are the angular velocity vectors of the two bodies. - // get hinge axis (Z) - btVector3 ax1 = trA.getBasis().getColumn(2); - // get 2 orthos to hinge axis (X, Y) - btVector3 p = trA.getBasis().getColumn(0); - btVector3 q = trA.getBasis().getColumn(1); - // set the two hinge angular rows - int s3 = 3 * info->rowskip; - int s4 = 4 * info->rowskip; - - info->m_J1angularAxis[s3 + 0] = p[0]; - info->m_J1angularAxis[s3 + 1] = p[1]; - info->m_J1angularAxis[s3 + 2] = p[2]; - info->m_J1angularAxis[s4 + 0] = q[0]; - info->m_J1angularAxis[s4 + 1] = q[1]; - info->m_J1angularAxis[s4 + 2] = q[2]; - - info->m_J2angularAxis[s3 + 0] = -p[0]; - info->m_J2angularAxis[s3 + 1] = -p[1]; - info->m_J2angularAxis[s3 + 2] = -p[2]; - info->m_J2angularAxis[s4 + 0] = -q[0]; - info->m_J2angularAxis[s4 + 1] = -q[1]; - info->m_J2angularAxis[s4 + 2] = -q[2]; - // compute the right hand side of the constraint equation. set relative - // body velocities along p and q to bring the hinge back into alignment. - // if ax1,ax2 are the unit length hinge axes as computed from body1 and - // body2, we need to rotate both bodies along the axis u = (ax1 x ax2). - // if `theta' is the angle between ax1 and ax2, we need an angular velocity - // along u to cover angle erp*theta in one step : - // |angular_velocity| = angle/time = erp*theta / stepsize - // = (erp*fps) * theta - // angular_velocity = |angular_velocity| * (ax1 x ax2) / |ax1 x ax2| - // = (erp*fps) * theta * (ax1 x ax2) / sin(theta) - // ...as ax1 and ax2 are unit length. if theta is smallish, - // theta ~= sin(theta), so - // angular_velocity = (erp*fps) * (ax1 x ax2) - // ax1 x ax2 is in the plane space of ax1, so we project the angular - // velocity to p and q to find the right hand side. - btVector3 ax2 = trB.getBasis().getColumn(2); - btVector3 u = ax1.cross(ax2); - info->m_constraintError[s3] = k * u.dot(p); - info->m_constraintError[s4] = k * u.dot(q); - // check angular limits - int nrow = 4; // last filled row - int srow; - btScalar limit_err = btScalar(0.0); - int limit = 0; - if(getSolveLimit()) - { -#ifdef _BT_USE_CENTER_LIMIT_ - limit_err = m_limit.getCorrection() * m_referenceSign; -#else - limit_err = m_correction * m_referenceSign; -#endif - limit = (limit_err > btScalar(0.0)) ? 1 : 2; - - } - // if the hinge has joint limits or motor, add in the extra row - bool powered = getEnableAngularMotor(); - if(limit || powered) - { - nrow++; - srow = nrow * info->rowskip; - info->m_J1angularAxis[srow+0] = ax1[0]; - info->m_J1angularAxis[srow+1] = ax1[1]; - info->m_J1angularAxis[srow+2] = ax1[2]; - - info->m_J2angularAxis[srow+0] = -ax1[0]; - info->m_J2angularAxis[srow+1] = -ax1[1]; - info->m_J2angularAxis[srow+2] = -ax1[2]; - - btScalar lostop = getLowerLimit(); - btScalar histop = getUpperLimit(); - if(limit && (lostop == histop)) - { // the joint motor is ineffective - powered = false; - } - info->m_constraintError[srow] = btScalar(0.0f); - btScalar currERP = (m_flags & BT_HINGE_FLAGS_ERP_STOP) ? m_stopERP : normalErp; - if(powered) - { - if(m_flags & BT_HINGE_FLAGS_CFM_NORM) - { - info->cfm[srow] = m_normalCFM; - } - btScalar mot_fact = getMotorFactor(m_hingeAngle, lostop, histop, m_motorTargetVelocity, info->fps * currERP); - info->m_constraintError[srow] += mot_fact * m_motorTargetVelocity * m_referenceSign; - info->m_lowerLimit[srow] = - m_maxMotorImpulse; - info->m_upperLimit[srow] = m_maxMotorImpulse; - } - if(limit) - { - k = info->fps * currERP; - info->m_constraintError[srow] += k * limit_err; - if(m_flags & BT_HINGE_FLAGS_CFM_STOP) - { - info->cfm[srow] = m_stopCFM; - } - if(lostop == histop) - { - // limited low and high simultaneously - info->m_lowerLimit[srow] = -SIMD_INFINITY; - info->m_upperLimit[srow] = SIMD_INFINITY; - } - else if(limit == 1) - { // low limit - info->m_lowerLimit[srow] = 0; - info->m_upperLimit[srow] = SIMD_INFINITY; - } - else - { // high limit - info->m_lowerLimit[srow] = -SIMD_INFINITY; - info->m_upperLimit[srow] = 0; - } - // bounce (we'll use slider parameter abs(1.0 - m_dampingLimAng) for that) -#ifdef _BT_USE_CENTER_LIMIT_ - btScalar bounce = m_limit.getRelaxationFactor(); -#else - btScalar bounce = m_relaxationFactor; -#endif - if(bounce > btScalar(0.0)) - { - btScalar vel = angVelA.dot(ax1); - vel -= angVelB.dot(ax1); - // only apply bounce if the velocity is incoming, and if the - // resulting c[] exceeds what we already have. - if(limit == 1) - { // low limit - if(vel < 0) - { - btScalar newc = -bounce * vel; - if(newc > info->m_constraintError[srow]) - { - info->m_constraintError[srow] = newc; - } - } - } - else - { // high limit - all those computations are reversed - if(vel > 0) - { - btScalar newc = -bounce * vel; - if(newc < info->m_constraintError[srow]) - { - info->m_constraintError[srow] = newc; - } - } - } - } -#ifdef _BT_USE_CENTER_LIMIT_ - info->m_constraintError[srow] *= m_limit.getBiasFactor(); -#else - info->m_constraintError[srow] *= m_biasFactor; -#endif - } // if(limit) - } // if angular limit or powered -} - - -void btHingeConstraint::setFrames(const btTransform & frameA, const btTransform & frameB) -{ - m_rbAFrame = frameA; - m_rbBFrame = frameB; - buildJacobian(); -} - - -void btHingeConstraint::updateRHS(btScalar timeStep) -{ - (void)timeStep; - -} - - - - -btScalar btHingeConstraint::getHingeAngle() -{ - return getHingeAngle(m_rbA.getCenterOfMassTransform(),m_rbB.getCenterOfMassTransform()); -} - -btScalar btHingeConstraint::getHingeAngle(const btTransform& transA,const btTransform& transB) -{ - const btVector3 refAxis0 = transA.getBasis() * m_rbAFrame.getBasis().getColumn(0); - const btVector3 refAxis1 = transA.getBasis() * m_rbAFrame.getBasis().getColumn(1); - const btVector3 swingAxis = transB.getBasis() * m_rbBFrame.getBasis().getColumn(1); -// btScalar angle = btAtan2Fast(swingAxis.dot(refAxis0), swingAxis.dot(refAxis1)); - btScalar angle = btAtan2(swingAxis.dot(refAxis0), swingAxis.dot(refAxis1)); - return m_referenceSign * angle; -} - - - -void btHingeConstraint::testLimit(const btTransform& transA,const btTransform& transB) -{ - // Compute limit information - m_hingeAngle = getHingeAngle(transA,transB); -#ifdef _BT_USE_CENTER_LIMIT_ - m_limit.test(m_hingeAngle); -#else - m_correction = btScalar(0.); - m_limitSign = btScalar(0.); - m_solveLimit = false; - if (m_lowerLimit <= m_upperLimit) - { - m_hingeAngle = btAdjustAngleToLimits(m_hingeAngle, m_lowerLimit, m_upperLimit); - if (m_hingeAngle <= m_lowerLimit) - { - m_correction = (m_lowerLimit - m_hingeAngle); - m_limitSign = 1.0f; - m_solveLimit = true; - } - else if (m_hingeAngle >= m_upperLimit) - { - m_correction = m_upperLimit - m_hingeAngle; - m_limitSign = -1.0f; - m_solveLimit = true; - } - } -#endif - return; -} - - -static btVector3 vHinge(0, 0, btScalar(1)); - -void btHingeConstraint::setMotorTarget(const btQuaternion& qAinB, btScalar dt) -{ - // convert target from body to constraint space - btQuaternion qConstraint = m_rbBFrame.getRotation().inverse() * qAinB * m_rbAFrame.getRotation(); - qConstraint.normalize(); - - // extract "pure" hinge component - btVector3 vNoHinge = quatRotate(qConstraint, vHinge); vNoHinge.normalize(); - btQuaternion qNoHinge = shortestArcQuat(vHinge, vNoHinge); - btQuaternion qHinge = qNoHinge.inverse() * qConstraint; - qHinge.normalize(); - - // compute angular target, clamped to limits - btScalar targetAngle = qHinge.getAngle(); - if (targetAngle > SIMD_PI) // long way around. flip quat and recalculate. - { - qHinge = -(qHinge); - targetAngle = qHinge.getAngle(); - } - if (qHinge.getZ() < 0) - targetAngle = -targetAngle; - - setMotorTarget(targetAngle, dt); -} - -void btHingeConstraint::setMotorTarget(btScalar targetAngle, btScalar dt) -{ -#ifdef _BT_USE_CENTER_LIMIT_ - m_limit.fit(targetAngle); -#else - if (m_lowerLimit < m_upperLimit) - { - if (targetAngle < m_lowerLimit) - targetAngle = m_lowerLimit; - else if (targetAngle > m_upperLimit) - targetAngle = m_upperLimit; - } -#endif - // compute angular velocity - btScalar curAngle = getHingeAngle(m_rbA.getCenterOfMassTransform(),m_rbB.getCenterOfMassTransform()); - btScalar dAngle = targetAngle - curAngle; - m_motorTargetVelocity = dAngle / dt; -} - - - -void btHingeConstraint::getInfo2InternalUsingFrameOffset(btConstraintInfo2* info, const btTransform& transA,const btTransform& transB,const btVector3& angVelA,const btVector3& angVelB) -{ - btAssert(!m_useSolveConstraintObsolete); - int i, s = info->rowskip; - // transforms in world space - btTransform trA = transA*m_rbAFrame; - btTransform trB = transB*m_rbBFrame; - // pivot point -// btVector3 pivotAInW = trA.getOrigin(); -// btVector3 pivotBInW = trB.getOrigin(); -#if 1 - // difference between frames in WCS - btVector3 ofs = trB.getOrigin() - trA.getOrigin(); - // now get weight factors depending on masses - btScalar miA = getRigidBodyA().getInvMass(); - btScalar miB = getRigidBodyB().getInvMass(); - bool hasStaticBody = (miA < SIMD_EPSILON) || (miB < SIMD_EPSILON); - btScalar miS = miA + miB; - btScalar factA, factB; - if(miS > btScalar(0.f)) - { - factA = miB / miS; - } - else - { - factA = btScalar(0.5f); - } - factB = btScalar(1.0f) - factA; - // get the desired direction of hinge axis - // as weighted sum of Z-orthos of frameA and frameB in WCS - btVector3 ax1A = trA.getBasis().getColumn(2); - btVector3 ax1B = trB.getBasis().getColumn(2); - btVector3 ax1 = ax1A * factA + ax1B * factB; - ax1.normalize(); - // fill first 3 rows - // we want: velA + wA x relA == velB + wB x relB - btTransform bodyA_trans = transA; - btTransform bodyB_trans = transB; - int s0 = 0; - int s1 = s; - int s2 = s * 2; - int nrow = 2; // last filled row - btVector3 tmpA, tmpB, relA, relB, p, q; - // get vector from bodyB to frameB in WCS - relB = trB.getOrigin() - bodyB_trans.getOrigin(); - // get its projection to hinge axis - btVector3 projB = ax1 * relB.dot(ax1); - // get vector directed from bodyB to hinge axis (and orthogonal to it) - btVector3 orthoB = relB - projB; - // same for bodyA - relA = trA.getOrigin() - bodyA_trans.getOrigin(); - btVector3 projA = ax1 * relA.dot(ax1); - btVector3 orthoA = relA - projA; - btVector3 totalDist = projA - projB; - // get offset vectors relA and relB - relA = orthoA + totalDist * factA; - relB = orthoB - totalDist * factB; - // now choose average ortho to hinge axis - p = orthoB * factA + orthoA * factB; - btScalar len2 = p.length2(); - if(len2 > SIMD_EPSILON) - { - p /= btSqrt(len2); - } - else - { - p = trA.getBasis().getColumn(1); - } - // make one more ortho - q = ax1.cross(p); - // fill three rows - tmpA = relA.cross(p); - tmpB = relB.cross(p); - for (i=0; i<3; i++) info->m_J1angularAxis[s0+i] = tmpA[i]; - for (i=0; i<3; i++) info->m_J2angularAxis[s0+i] = -tmpB[i]; - tmpA = relA.cross(q); - tmpB = relB.cross(q); - if(hasStaticBody && getSolveLimit()) - { // to make constraint between static and dynamic objects more rigid - // remove wA (or wB) from equation if angular limit is hit - tmpB *= factB; - tmpA *= factA; - } - for (i=0; i<3; i++) info->m_J1angularAxis[s1+i] = tmpA[i]; - for (i=0; i<3; i++) info->m_J2angularAxis[s1+i] = -tmpB[i]; - tmpA = relA.cross(ax1); - tmpB = relB.cross(ax1); - if(hasStaticBody) - { // to make constraint between static and dynamic objects more rigid - // remove wA (or wB) from equation - tmpB *= factB; - tmpA *= factA; - } - for (i=0; i<3; i++) info->m_J1angularAxis[s2+i] = tmpA[i]; - for (i=0; i<3; i++) info->m_J2angularAxis[s2+i] = -tmpB[i]; - - btScalar normalErp = (m_flags & BT_HINGE_FLAGS_ERP_NORM)? m_normalERP : info->erp; - btScalar k = info->fps * normalErp; - - if (!m_angularOnly) - { - for (i=0; i<3; i++) info->m_J1linearAxis[s0+i] = p[i]; - for (i=0; i<3; i++) info->m_J1linearAxis[s1+i] = q[i]; - for (i=0; i<3; i++) info->m_J1linearAxis[s2+i] = ax1[i]; - - for (i=0; i<3; i++) info->m_J2linearAxis[s0+i] = -p[i]; - for (i=0; i<3; i++) info->m_J2linearAxis[s1+i] = -q[i]; - for (i=0; i<3; i++) info->m_J2linearAxis[s2+i] = -ax1[i]; - - // compute three elements of right hand side - - btScalar rhs = k * p.dot(ofs); - info->m_constraintError[s0] = rhs; - rhs = k * q.dot(ofs); - info->m_constraintError[s1] = rhs; - rhs = k * ax1.dot(ofs); - info->m_constraintError[s2] = rhs; - } - // the hinge axis should be the only unconstrained - // rotational axis, the angular velocity of the two bodies perpendicular to - // the hinge axis should be equal. thus the constraint equations are - // p*w1 - p*w2 = 0 - // q*w1 - q*w2 = 0 - // where p and q are unit vectors normal to the hinge axis, and w1 and w2 - // are the angular velocity vectors of the two bodies. - int s3 = 3 * s; - int s4 = 4 * s; - info->m_J1angularAxis[s3 + 0] = p[0]; - info->m_J1angularAxis[s3 + 1] = p[1]; - info->m_J1angularAxis[s3 + 2] = p[2]; - info->m_J1angularAxis[s4 + 0] = q[0]; - info->m_J1angularAxis[s4 + 1] = q[1]; - info->m_J1angularAxis[s4 + 2] = q[2]; - - info->m_J2angularAxis[s3 + 0] = -p[0]; - info->m_J2angularAxis[s3 + 1] = -p[1]; - info->m_J2angularAxis[s3 + 2] = -p[2]; - info->m_J2angularAxis[s4 + 0] = -q[0]; - info->m_J2angularAxis[s4 + 1] = -q[1]; - info->m_J2angularAxis[s4 + 2] = -q[2]; - // compute the right hand side of the constraint equation. set relative - // body velocities along p and q to bring the hinge back into alignment. - // if ax1A,ax1B are the unit length hinge axes as computed from bodyA and - // bodyB, we need to rotate both bodies along the axis u = (ax1 x ax2). - // if "theta" is the angle between ax1 and ax2, we need an angular velocity - // along u to cover angle erp*theta in one step : - // |angular_velocity| = angle/time = erp*theta / stepsize - // = (erp*fps) * theta - // angular_velocity = |angular_velocity| * (ax1 x ax2) / |ax1 x ax2| - // = (erp*fps) * theta * (ax1 x ax2) / sin(theta) - // ...as ax1 and ax2 are unit length. if theta is smallish, - // theta ~= sin(theta), so - // angular_velocity = (erp*fps) * (ax1 x ax2) - // ax1 x ax2 is in the plane space of ax1, so we project the angular - // velocity to p and q to find the right hand side. - k = info->fps * normalErp;//?? - - btVector3 u = ax1A.cross(ax1B); - info->m_constraintError[s3] = k * u.dot(p); - info->m_constraintError[s4] = k * u.dot(q); -#endif - // check angular limits - nrow = 4; // last filled row - int srow; - btScalar limit_err = btScalar(0.0); - int limit = 0; - if(getSolveLimit()) - { -#ifdef _BT_USE_CENTER_LIMIT_ - limit_err = m_limit.getCorrection() * m_referenceSign; -#else - limit_err = m_correction * m_referenceSign; -#endif - limit = (limit_err > btScalar(0.0)) ? 1 : 2; - - } - // if the hinge has joint limits or motor, add in the extra row - bool powered = getEnableAngularMotor(); - if(limit || powered) - { - nrow++; - srow = nrow * info->rowskip; - info->m_J1angularAxis[srow+0] = ax1[0]; - info->m_J1angularAxis[srow+1] = ax1[1]; - info->m_J1angularAxis[srow+2] = ax1[2]; - - info->m_J2angularAxis[srow+0] = -ax1[0]; - info->m_J2angularAxis[srow+1] = -ax1[1]; - info->m_J2angularAxis[srow+2] = -ax1[2]; - - btScalar lostop = getLowerLimit(); - btScalar histop = getUpperLimit(); - if(limit && (lostop == histop)) - { // the joint motor is ineffective - powered = false; - } - info->m_constraintError[srow] = btScalar(0.0f); - btScalar currERP = (m_flags & BT_HINGE_FLAGS_ERP_STOP) ? m_stopERP : normalErp; - if(powered) - { - if(m_flags & BT_HINGE_FLAGS_CFM_NORM) - { - info->cfm[srow] = m_normalCFM; - } - btScalar mot_fact = getMotorFactor(m_hingeAngle, lostop, histop, m_motorTargetVelocity, info->fps * currERP); - info->m_constraintError[srow] += mot_fact * m_motorTargetVelocity * m_referenceSign; - info->m_lowerLimit[srow] = - m_maxMotorImpulse; - info->m_upperLimit[srow] = m_maxMotorImpulse; - } - if(limit) - { - k = info->fps * currERP; - info->m_constraintError[srow] += k * limit_err; - if(m_flags & BT_HINGE_FLAGS_CFM_STOP) - { - info->cfm[srow] = m_stopCFM; - } - if(lostop == histop) - { - // limited low and high simultaneously - info->m_lowerLimit[srow] = -SIMD_INFINITY; - info->m_upperLimit[srow] = SIMD_INFINITY; - } - else if(limit == 1) - { // low limit - info->m_lowerLimit[srow] = 0; - info->m_upperLimit[srow] = SIMD_INFINITY; - } - else - { // high limit - info->m_lowerLimit[srow] = -SIMD_INFINITY; - info->m_upperLimit[srow] = 0; - } - // bounce (we'll use slider parameter abs(1.0 - m_dampingLimAng) for that) -#ifdef _BT_USE_CENTER_LIMIT_ - btScalar bounce = m_limit.getRelaxationFactor(); -#else - btScalar bounce = m_relaxationFactor; -#endif - if(bounce > btScalar(0.0)) - { - btScalar vel = angVelA.dot(ax1); - vel -= angVelB.dot(ax1); - // only apply bounce if the velocity is incoming, and if the - // resulting c[] exceeds what we already have. - if(limit == 1) - { // low limit - if(vel < 0) - { - btScalar newc = -bounce * vel; - if(newc > info->m_constraintError[srow]) - { - info->m_constraintError[srow] = newc; - } - } - } - else - { // high limit - all those computations are reversed - if(vel > 0) - { - btScalar newc = -bounce * vel; - if(newc < info->m_constraintError[srow]) - { - info->m_constraintError[srow] = newc; - } - } - } - } -#ifdef _BT_USE_CENTER_LIMIT_ - info->m_constraintError[srow] *= m_limit.getBiasFactor(); -#else - info->m_constraintError[srow] *= m_biasFactor; -#endif - } // if(limit) - } // if angular limit or powered -} - - -///override the default global value of a parameter (such as ERP or CFM), optionally provide the axis (0..5). -///If no axis is provided, it uses the default axis for this constraint. -void btHingeConstraint::setParam(int num, btScalar value, int axis) -{ - if((axis == -1) || (axis == 5)) - { - switch(num) - { - case BT_CONSTRAINT_STOP_ERP : - m_stopERP = value; - m_flags |= BT_HINGE_FLAGS_ERP_STOP; - break; - case BT_CONSTRAINT_STOP_CFM : - m_stopCFM = value; - m_flags |= BT_HINGE_FLAGS_CFM_STOP; - break; - case BT_CONSTRAINT_CFM : - m_normalCFM = value; - m_flags |= BT_HINGE_FLAGS_CFM_NORM; - break; - case BT_CONSTRAINT_ERP: - m_normalERP = value; - m_flags |= BT_HINGE_FLAGS_ERP_NORM; - break; - default : - btAssertConstrParams(0); - } - } - else - { - btAssertConstrParams(0); - } -} - -///return the local value of parameter -btScalar btHingeConstraint::getParam(int num, int axis) const -{ - btScalar retVal = 0; - if((axis == -1) || (axis == 5)) - { - switch(num) - { - case BT_CONSTRAINT_STOP_ERP : - btAssertConstrParams(m_flags & BT_HINGE_FLAGS_ERP_STOP); - retVal = m_stopERP; - break; - case BT_CONSTRAINT_STOP_CFM : - btAssertConstrParams(m_flags & BT_HINGE_FLAGS_CFM_STOP); - retVal = m_stopCFM; - break; - case BT_CONSTRAINT_CFM : - btAssertConstrParams(m_flags & BT_HINGE_FLAGS_CFM_NORM); - retVal = m_normalCFM; - break; - case BT_CONSTRAINT_ERP: - btAssertConstrParams(m_flags & BT_HINGE_FLAGS_ERP_NORM); - retVal = m_normalERP; - break; - default : - btAssertConstrParams(0); - } - } - else - { - btAssertConstrParams(0); - } - return retVal; -} - - |