diff options
Diffstat (limited to 'tests')
28 files changed, 816 insertions, 136 deletions
diff --git a/tests/core/math/test_quaternion.h b/tests/core/math/test_quaternion.h index 94eef6c463..1b80ffba0b 100644 --- a/tests/core/math/test_quaternion.h +++ b/tests/core/math/test_quaternion.h @@ -41,9 +41,9 @@ namespace TestQuaternion { Quaternion quat_euler_yxz_deg(Vector3 angle) { - double yaw = Math::deg2rad(angle[1]); - double pitch = Math::deg2rad(angle[0]); - double roll = Math::deg2rad(angle[2]); + double yaw = Math::deg_to_rad(angle[1]); + double pitch = Math::deg_to_rad(angle[0]); + double roll = Math::deg_to_rad(angle[2]); // Generate YXZ (Z-then-X-then-Y) Quaternion using single-axis Euler // constructor and quaternion product, both tested separately. @@ -77,7 +77,7 @@ TEST_CASE("[Quaternion] Construct x,y,z,w") { TEST_CASE("[Quaternion] Construct AxisAngle 1") { // Easy to visualize: 120 deg about X-axis. - Quaternion q(Vector3(1.0, 0.0, 0.0), Math::deg2rad(120.0)); + Quaternion q(Vector3(1.0, 0.0, 0.0), Math::deg_to_rad(120.0)); // 0.866 isn't close enough; doctest::Approx doesn't cut much slack! CHECK(q[0] == doctest::Approx(0.866025)); // Sine of half the angle. @@ -88,7 +88,7 @@ TEST_CASE("[Quaternion] Construct AxisAngle 1") { TEST_CASE("[Quaternion] Construct AxisAngle 2") { // Easy to visualize: 30 deg about Y-axis. - Quaternion q(Vector3(0.0, 1.0, 0.0), Math::deg2rad(30.0)); + Quaternion q(Vector3(0.0, 1.0, 0.0), Math::deg_to_rad(30.0)); CHECK(q[0] == doctest::Approx(0.0)); CHECK(q[1] == doctest::Approx(0.258819)); // Sine of half the angle. @@ -98,7 +98,7 @@ TEST_CASE("[Quaternion] Construct AxisAngle 2") { TEST_CASE("[Quaternion] Construct AxisAngle 3") { // Easy to visualize: 60 deg about Z-axis. - Quaternion q(Vector3(0.0, 0.0, 1.0), Math::deg2rad(60.0)); + Quaternion q(Vector3(0.0, 0.0, 1.0), Math::deg_to_rad(60.0)); CHECK(q[0] == doctest::Approx(0.0)); CHECK(q[1] == doctest::Approx(0.0)); @@ -109,7 +109,7 @@ TEST_CASE("[Quaternion] Construct AxisAngle 3") { TEST_CASE("[Quaternion] Construct AxisAngle 4") { // More complex & hard to visualize, so test w/ data from online calculator. Vector3 axis(1.0, 2.0, 0.5); - Quaternion q(axis.normalized(), Math::deg2rad(35.0)); + Quaternion q(axis.normalized(), Math::deg_to_rad(35.0)); CHECK(q[0] == doctest::Approx(0.131239)); CHECK(q[1] == doctest::Approx(0.262478)); @@ -119,7 +119,7 @@ TEST_CASE("[Quaternion] Construct AxisAngle 4") { TEST_CASE("[Quaternion] Construct from Quaternion") { Vector3 axis(1.0, 2.0, 0.5); - Quaternion q_src(axis.normalized(), Math::deg2rad(35.0)); + Quaternion q_src(axis.normalized(), Math::deg_to_rad(35.0)); Quaternion q(q_src); CHECK(q[0] == doctest::Approx(0.131239)); @@ -129,9 +129,9 @@ TEST_CASE("[Quaternion] Construct from Quaternion") { } TEST_CASE("[Quaternion] Construct Euler SingleAxis") { - double yaw = Math::deg2rad(45.0); - double pitch = Math::deg2rad(30.0); - double roll = Math::deg2rad(10.0); + double yaw = Math::deg_to_rad(45.0); + double pitch = Math::deg_to_rad(30.0); + double roll = Math::deg_to_rad(10.0); Vector3 euler_y(0.0, yaw, 0.0); Quaternion q_y(euler_y); @@ -156,9 +156,9 @@ TEST_CASE("[Quaternion] Construct Euler SingleAxis") { } TEST_CASE("[Quaternion] Construct Euler YXZ dynamic axes") { - double yaw = Math::deg2rad(45.0); - double pitch = Math::deg2rad(30.0); - double roll = Math::deg2rad(10.0); + double yaw = Math::deg_to_rad(45.0); + double pitch = Math::deg_to_rad(30.0); + double roll = Math::deg_to_rad(10.0); // Generate YXZ comparision data (Z-then-X-then-Y) using single-axis Euler // constructor and quaternion product, both tested separately. @@ -187,9 +187,9 @@ TEST_CASE("[Quaternion] Construct Euler YXZ dynamic axes") { } TEST_CASE("[Quaternion] Construct Basis Euler") { - double yaw = Math::deg2rad(45.0); - double pitch = Math::deg2rad(30.0); - double roll = Math::deg2rad(10.0); + double yaw = Math::deg_to_rad(45.0); + double pitch = Math::deg_to_rad(30.0); + double roll = Math::deg_to_rad(10.0); Vector3 euler_yxz(pitch, yaw, roll); Quaternion q_yxz(euler_yxz); Basis basis_axes(euler_yxz); @@ -199,7 +199,7 @@ TEST_CASE("[Quaternion] Construct Basis Euler") { TEST_CASE("[Quaternion] Construct Basis Axes") { // Arbitrary Euler angles. - Vector3 euler_yxz(Math::deg2rad(31.41), Math::deg2rad(-49.16), Math::deg2rad(12.34)); + Vector3 euler_yxz(Math::deg_to_rad(31.41), Math::deg_to_rad(-49.16), Math::deg_to_rad(12.34)); // Basis vectors from online calculation of rotation matrix. Vector3 i_unit(0.5545787, 0.1823950, 0.8118957); Vector3 j_unit(-0.5249245, 0.8337420, 0.1712555); @@ -248,9 +248,9 @@ TEST_CASE("[Quaternion] Product (book)") { } TEST_CASE("[Quaternion] Product") { - double yaw = Math::deg2rad(45.0); - double pitch = Math::deg2rad(30.0); - double roll = Math::deg2rad(10.0); + double yaw = Math::deg_to_rad(45.0); + double pitch = Math::deg_to_rad(30.0); + double roll = Math::deg_to_rad(10.0); Vector3 euler_y(0.0, yaw, 0.0); Quaternion q_y(euler_y); @@ -292,7 +292,7 @@ TEST_CASE("[Quaternion] Product") { TEST_CASE("[Quaternion] xform unit vectors") { // Easy to visualize: 120 deg about X-axis. // Transform the i, j, & k unit vectors. - Quaternion q(Vector3(1.0, 0.0, 0.0), Math::deg2rad(120.0)); + Quaternion q(Vector3(1.0, 0.0, 0.0), Math::deg_to_rad(120.0)); Vector3 i_t = q.xform(Vector3(1.0, 0.0, 0.0)); Vector3 j_t = q.xform(Vector3(0.0, 1.0, 0.0)); Vector3 k_t = q.xform(Vector3(0.0, 0.0, 1.0)); @@ -305,7 +305,7 @@ TEST_CASE("[Quaternion] xform unit vectors") { CHECK(k_t.length_squared() == doctest::Approx(1.0)); // Easy to visualize: 30 deg about Y-axis. - q = Quaternion(Vector3(0.0, 1.0, 0.0), Math::deg2rad(30.0)); + q = Quaternion(Vector3(0.0, 1.0, 0.0), Math::deg_to_rad(30.0)); i_t = q.xform(Vector3(1.0, 0.0, 0.0)); j_t = q.xform(Vector3(0.0, 1.0, 0.0)); k_t = q.xform(Vector3(0.0, 0.0, 1.0)); @@ -318,7 +318,7 @@ TEST_CASE("[Quaternion] xform unit vectors") { CHECK(k_t.length_squared() == doctest::Approx(1.0)); // Easy to visualize: 60 deg about Z-axis. - q = Quaternion(Vector3(0.0, 0.0, 1.0), Math::deg2rad(60.0)); + q = Quaternion(Vector3(0.0, 0.0, 1.0), Math::deg_to_rad(60.0)); i_t = q.xform(Vector3(1.0, 0.0, 0.0)); j_t = q.xform(Vector3(0.0, 1.0, 0.0)); k_t = q.xform(Vector3(0.0, 0.0, 1.0)); @@ -333,7 +333,7 @@ TEST_CASE("[Quaternion] xform unit vectors") { TEST_CASE("[Quaternion] xform vector") { // Arbitrary quaternion rotates an arbitrary vector. - Vector3 euler_yzx(Math::deg2rad(31.41), Math::deg2rad(-49.16), Math::deg2rad(12.34)); + Vector3 euler_yzx(Math::deg_to_rad(31.41), Math::deg_to_rad(-49.16), Math::deg_to_rad(12.34)); Basis basis_axes(euler_yzx); Quaternion q(basis_axes); diff --git a/tests/core/object/test_object.h b/tests/core/object/test_object.h index 88a3e4ccad..f5c5de7fdf 100644 --- a/tests/core/object/test_object.h +++ b/tests/core/object/test_object.h @@ -82,6 +82,12 @@ public: Variant::Type get_property_type(const StringName &p_name, bool *r_is_valid) const override { return Variant::PACKED_FLOAT32_ARRAY; } + bool property_can_revert(const StringName &p_name) const override { + return false; + }; + bool property_get_revert(const StringName &p_name, Variant &r_ret) const override { + return false; + }; void get_method_list(List<MethodInfo> *p_list) const override { } bool has_method(const StringName &p_method) const override { diff --git a/tests/core/string/test_string.h b/tests/core/string/test_string.h index 8914dbfd9a..62d2051eee 100644 --- a/tests/core/string/test_string.h +++ b/tests/core/string/test_string.h @@ -619,7 +619,7 @@ TEST_CASE("[String] sprintf") { output = format.sprintf(args, &error); REQUIRE(error == false); CHECK(output == String("fish % frog")); - //////// INTS + ///// Ints // Int format = "fish %d frog"; @@ -727,7 +727,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); CHECK(output == String("fish 143 frog")); - ////// REALS + ///// Reals // Real format = "fish %f frog"; @@ -737,7 +737,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); CHECK(output == String("fish 99.990000 frog")); - // Real left-padded + // Real left-padded. format = "fish %11f frog"; args.clear(); args.push_back(99.99); @@ -745,7 +745,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); CHECK(output == String("fish 99.990000 frog")); - // Real right-padded + // Real right-padded. format = "fish %-11f frog"; args.clear(); args.push_back(99.99); @@ -769,7 +769,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); CHECK(output == String("fish +99.990000 frog")); - // Real with 1 decimals. + // Real with 1 decimal. format = "fish %.1f frog"; args.clear(); args.push_back(99.99); @@ -803,7 +803,97 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); CHECK(output == String("fish -99.990000 frog")); - /////// Strings. + ///// Vectors + + // Vector2 + format = "fish %v frog"; + args.clear(); + args.push_back(Variant(Vector2(19.99, 1.00))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (19.990000, 1.000000) frog")); + + // Vector3 + format = "fish %v frog"; + args.clear(); + args.push_back(Variant(Vector3(19.99, 1.00, -2.05))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (19.990000, 1.000000, -2.050000) frog")); + + // Vector4 + format = "fish %v frog"; + args.clear(); + args.push_back(Variant(Vector4(19.99, 1.00, -2.05, 5.5))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (19.990000, 1.000000, -2.050000, 5.500000) frog")); + + // Vector with negative values. + format = "fish %v frog"; + args.clear(); + args.push_back(Variant(Vector2(-19.99, -1.00))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (-19.990000, -1.000000) frog")); + + // Vector left-padded. + format = "fish %11v frog"; + args.clear(); + args.push_back(Variant(Vector3(19.99, 1.00, -2.05))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish ( 19.990000, 1.000000, -2.050000) frog")); + + // Vector right-padded. + format = "fish %-11v frog"; + args.clear(); + args.push_back(Variant(Vector3(19.99, 1.00, -2.05))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (19.990000 , 1.000000 , -2.050000 ) frog")); + + // Vector left-padded with zeros. + format = "fish %011v frog"; + args.clear(); + args.push_back(Variant(Vector3(19.99, 1.00, -2.05))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (0019.990000, 0001.000000, -002.050000) frog")); + + // Vector given Vector3i. + format = "fish %v frog"; + args.clear(); + args.push_back(Variant(Vector3i(19, 1, -2))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (19.000000, 1.000000, -2.000000) frog")); + + // Vector with 1 decimal. + format = "fish %.1v frog"; + args.clear(); + args.push_back(Variant(Vector3(19.99, 1.00, -2.05))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (20.0, 1.0, -2.0) frog")); + + // Vector with 12 decimals. + format = "fish %.12v frog"; + args.clear(); + args.push_back(Variant(Vector3(19.00, 1.00, -2.00))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (19.000000000000, 1.000000000000, -2.000000000000) frog")); + + // Vector with no decimals. + format = "fish %.v frog"; + args.clear(); + args.push_back(Variant(Vector3(19.99, 1.00, -2.05))); + output = format.sprintf(args, &error); + REQUIRE(error == false); + CHECK(output == String("fish (20, 1, -2) frog")); + + ///// Strings // String format = "fish %s frog"; @@ -813,7 +903,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); CHECK(output == String("fish cheese frog")); - // String left-padded + // String left-padded. format = "fish %10s frog"; args.clear(); args.push_back("cheese"); @@ -821,7 +911,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); CHECK(output == String("fish cheese frog")); - // String right-padded + // String right-padded. format = "fish %-10s frog"; args.clear(); args.push_back("cheese"); @@ -849,7 +939,7 @@ TEST_CASE("[String] sprintf") { ///// Dynamic width - // String dynamic width + // String dynamic width. format = "fish %*s frog"; args.clear(); args.push_back(10); @@ -858,7 +948,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); REQUIRE(output == String("fish cheese frog")); - // Int dynamic width + // Int dynamic width. format = "fish %*d frog"; args.clear(); args.push_back(10); @@ -867,7 +957,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error == false); REQUIRE(output == String("fish 99 frog")); - // Float dynamic width + // Float dynamic width. format = "fish %*.*f frog"; args.clear(); args.push_back(10); @@ -904,7 +994,7 @@ TEST_CASE("[String] sprintf") { REQUIRE(error); CHECK(output == "incomplete format"); - // Bad character in format string + // Bad character in format string. format = "fish %&f frog"; args.clear(); args.push_back("cheese"); @@ -920,14 +1010,14 @@ TEST_CASE("[String] sprintf") { REQUIRE(error); CHECK(output == "too many decimal points in format"); - // * not a number + // * not a number or vector. format = "fish %*f frog"; args.clear(); args.push_back("cheese"); args.push_back(99.99); output = format.sprintf(args, &error); REQUIRE(error); - CHECK(output == "* wants number"); + CHECK(output == "* wants number or vector"); // Character too long. format = "fish %c frog"; diff --git a/tests/create_test.py b/tests/create_test.py new file mode 100644 index 0000000000..5a0439084f --- /dev/null +++ b/tests/create_test.py @@ -0,0 +1,132 @@ +#!/usr/bin/env python3 + +import argparse +import os +import re +import sys +from subprocess import call + + +def main(): + # Change to the directory where the script is located, + # so that the script can be run from any location. + os.chdir(os.path.dirname(os.path.realpath(__file__))) + + parser = argparse.ArgumentParser(description="Creates a new unit test file.") + parser.add_argument("name", type=str, help="The unit test name in PascalCase notation") + parser.add_argument( + "path", + type=str, + nargs="?", + help="The path to the unit test file relative to the tests folder (default: .)", + default=".", + ) + parser.add_argument( + "-i", + "--invasive", + action="store_true", + help="if set, the script will automatically insert the include directive in test_main.cpp. Use with caution!", + ) + args = parser.parse_args() + + snake_case_regex = re.compile(r"(?<!^)(?=[A-Z])") + name_snake_case = snake_case_regex.sub("_", args.name).lower() + + file_path = os.path.normpath(os.path.join(args.path, f"test_{name_snake_case}.h")) + + print(file_path) + if os.path.isfile(file_path): + print(f'ERROR: The file "{file_path}" already exists.') + sys.exit(1) + with open(file_path, "w") as file: + file.write( + """/*************************************************************************/ +/* test_{name_snake_case}.h {padding} */ +/*************************************************************************/ +/* This file is part of: */ +/* GODOT ENGINE */ +/* https://godotengine.org */ +/*************************************************************************/ +/* Copyright (c) 2007-2021 Juan Linietsky, Ariel Manzur. */ +/* Copyright (c) 2014-2021 Godot Engine contributors (cf. AUTHORS.md). */ +/* */ +/* Permission is hereby granted, free of charge, to any person obtaining */ +/* a copy of this software and associated documentation files (the */ +/* "Software"), to deal in the Software without restriction, including */ +/* without limitation the rights to use, copy, modify, merge, publish, */ +/* distribute, sublicense, and/or sell copies of the Software, and to */ +/* permit persons to whom the Software is furnished to do so, subject to */ +/* the following conditions: */ +/* */ +/* The above copyright notice and this permission notice shall be */ +/* included in all copies or substantial portions of the Software. */ +/* */ +/* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, */ +/* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF */ +/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.*/ +/* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY */ +/* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, */ +/* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE */ +/* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ +/*************************************************************************/ + +#ifndef TEST_{name_upper_snake_case}_H +#define TEST_{name_upper_snake_case}_H + +#include "tests/test_macros.h" + +namespace Test{name_pascal_case} {{ + +TEST_CASE("[{name_pascal_case}] Example test case") {{ + // TODO: Remove this comment and write your test code here. +}} + +}} // namespace Test{name_pascal_case} + +#endif // TEST_{name_upper_snake_case}_H +""".format( + name_snake_case=name_snake_case, + # Capitalize the first letter but keep capitalization for the rest of the string. + # This is done in case the user passes a camelCase string instead of PascalCase. + name_pascal_case=args.name[0].upper() + args.name[1:], + name_upper_snake_case=name_snake_case.upper(), + # The padding length depends on the test name length. + padding=" " * (60 - len(name_snake_case)), + ) + ) + + # Print an absolute path so it can be Ctrl + clicked in some IDEs and terminal emulators. + print("Test header file created:") + print(os.path.abspath(file_path)) + + if args.invasive: + print("Trying to insert include directive in test_main.cpp...") + with open("test_main.cpp", "r") as file: + contents = file.read() + match = re.search(r'#include "tests.*\n', contents) + + if match: + new_string = contents[: match.start()] + f'#include "tests/{file_path}"\n' + contents[match.start() :] + + with open("test_main.cpp", "w") as file: + file.write(new_string) + print("Done.") + # Use clang format to sort include directives afster insertion. + clang_format_args = ["clang-format", "test_main.cpp", "-i"] + retcode = call(clang_format_args) + if retcode != 0: + print( + "Include directives in test_main.cpp could not be sorted automatically using clang-format. Please sort them manually." + ) + else: + print("Could not find a valid position in test_main.cpp to insert the include directive.") + + else: + print("\nRemember to #include the new test header in this file (following alphabetical order):") + print(os.path.abspath("test_main.cpp")) + print("Insert the following line in the appropriate place:") + print(f'#include "tests/{file_path}"') + + +if __name__ == "__main__": + main() diff --git a/tests/python_build/conftest.py b/tests/python_build/conftest.py new file mode 100644 index 0000000000..617230926a --- /dev/null +++ b/tests/python_build/conftest.py @@ -0,0 +1,26 @@ +import os +import sys +from pathlib import Path + +import pytest + +CWD = Path(__file__).parent +ROOT = CWD.parent.parent +# append directory with build files to sys.path to import them +sys.path.append(str(ROOT)) + + +@pytest.fixture +def shader_files(request): + shader_path = request.param + + res = { + "path_input": str(CWD / "fixtures" / f"{shader_path}.glsl"), + "path_output": str(CWD / "fixtures" / f"{shader_path}.glsl.gen.h"), + "path_expected_full": str(CWD / "fixtures" / f"{shader_path}_expected_full.glsl"), + "path_expected_parts": str(CWD / "fixtures" / f"{shader_path}_expected_parts.json"), + } + yield res + + if not os.getenv("PYTEST_KEEP_GENERATED_FILES"): + os.remove(res["path_output"]) diff --git a/tests/python_build/fixtures/gles3/_included.glsl b/tests/python_build/fixtures/gles3/_included.glsl new file mode 100644 index 0000000000..adf5f702d3 --- /dev/null +++ b/tests/python_build/fixtures/gles3/_included.glsl @@ -0,0 +1 @@ +#define M_PI 3.14159265359 diff --git a/tests/python_build/fixtures/gles3/vertex_fragment.glsl b/tests/python_build/fixtures/gles3/vertex_fragment.glsl new file mode 100644 index 0000000000..3004e22f25 --- /dev/null +++ b/tests/python_build/fixtures/gles3/vertex_fragment.glsl @@ -0,0 +1,34 @@ +#include "_included.glsl" + +#[modes] + +mode_ninepatch = #define USE_NINEPATCH + +#[specializations] + +DISABLE_LIGHTING = false + +#[vertex] + +precision highp float; +precision highp int; + +layout(location = 0) in highp vec3 vertex; + +out highp vec4 position_interp; + +void main() { + position_interp = vec4(vertex.x,1,0,1); +} + +#[fragment] + +precision highp float; +precision highp int; + +in highp vec4 position_interp; + +void main() { + highp float depth = ((position_interp.z / position_interp.w) + 1.0); + frag_color = vec4(depth); +} diff --git a/tests/python_build/fixtures/gles3/vertex_fragment_expected_full.glsl b/tests/python_build/fixtures/gles3/vertex_fragment_expected_full.glsl new file mode 100644 index 0000000000..7bf56e73cd --- /dev/null +++ b/tests/python_build/fixtures/gles3/vertex_fragment_expected_full.glsl @@ -0,0 +1,50 @@ +/* WARNING, THIS FILE WAS GENERATED, DO NOT EDIT */ +#ifndef VERTEX_FRAGMENT_GLSL_GEN_HGLES3_GLES3 +#define VERTEX_FRAGMENT_GLSL_GEN_HGLES3_GLES3 + + +#include "drivers/gles3/shader_gles3.h" + + +class VertexFragmentShaderGLES3 : public ShaderGLES3 { + +public: + + enum ShaderVariant { + MODE_NINEPATCH, + }; + + enum Specializations { + DISABLE_LIGHTING=1, + }; + + _FORCE_INLINE_ void version_bind_shader(RID p_version,ShaderVariant p_variant,uint64_t p_specialization=0) { _version_bind_shader(p_version,p_variant,p_specialization); } + +protected: + + virtual void _init() override { + + static const char **_uniform_strings=nullptr; + static const char* _variant_defines[]={ + "#define USE_NINEPATCH", + }; + + static TexUnitPair *_texunit_pairs=nullptr; + static UBOPair *_ubo_pairs=nullptr; + static Specialization _spec_pairs[]={ + {"DISABLE_LIGHTING",false}, + }; + + static const char _vertex_code[]={ +10,112,114,101,99,105,115,105,111,110,32,104,105,103,104,112,32,102,108,111,97,116,59,10,112,114,101,99,105,115,105,111,110,32,104,105,103,104,112,32,105,110,116,59,10,10,108,97,121,111,117,116,40,108,111,99,97,116,105,111,110,32,61,32,48,41,32,105,110,32,104,105,103,104,112,32,118,101,99,51,32,118,101,114,116,101,120,59,10,10,111,117,116,32,104,105,103,104,112,32,118,101,99,52,32,112,111,115,105,116,105,111,110,95,105,110,116,101,114,112,59,10,10,118,111,105,100,32,109,97,105,110,40,41,32,123,10,9,112,111,115,105,116,105,111,110,95,105,110,116,101,114,112,32,61,32,118,101,99,52,40,118,101,114,116,101,120,46,120,44,49,44,48,44,49,41,59,10,125,10,10, 0}; + + static const char _fragment_code[]={ +10,112,114,101,99,105,115,105,111,110,32,104,105,103,104,112,32,102,108,111,97,116,59,10,112,114,101,99,105,115,105,111,110,32,104,105,103,104,112,32,105,110,116,59,10,10,105,110,32,104,105,103,104,112,32,118,101,99,52,32,112,111,115,105,116,105,111,110,95,105,110,116,101,114,112,59,10,10,118,111,105,100,32,109,97,105,110,40,41,32,123,10,9,104,105,103,104,112,32,102,108,111,97,116,32,100,101,112,116,104,32,61,32,40,40,112,111,115,105,116,105,111,110,95,105,110,116,101,114,112,46,122,32,47,32,112,111,115,105,116,105,111,110,95,105,110,116,101,114,112,46,119,41,32,43,32,49,46,48,41,59,10,9,102,114,97,103,95,99,111,108,111,114,32,61,32,118,101,99,52,40,100,101,112,116,104,41,59,10,125,10, 0}; + + _setup(_vertex_code,_fragment_code,"VertexFragmentShaderGLES3",0,_uniform_strings,0,_ubo_pairs,0,_texunit_pairs,1,_spec_pairs,1,_variant_defines); + } + +}; + +#endif + diff --git a/tests/python_build/fixtures/gles3/vertex_fragment_expected_parts.json b/tests/python_build/fixtures/gles3/vertex_fragment_expected_parts.json new file mode 100644 index 0000000000..eaeb5981c0 --- /dev/null +++ b/tests/python_build/fixtures/gles3/vertex_fragment_expected_parts.json @@ -0,0 +1,52 @@ +{ + "vertex_lines": [ + "", + "precision highp float;", + "precision highp int;", + "", + "layout(location = 0) in highp vec3 vertex;", + "", + "out highp vec4 position_interp;", + "", + "void main() {", + "\tposition_interp = vec4(vertex.x,1,0,1);", + "}", + "" + ], + "fragment_lines": [ + "", + "precision highp float;", + "precision highp int;", + "", + "in highp vec4 position_interp;", + "", + "void main() {", + "\thighp float depth = ((position_interp.z / position_interp.w) + 1.0);", + "\tfrag_color = vec4(depth);", + "}" + ], + "uniforms": [], + "fbos": [], + "texunits": [], + "texunit_names": [], + "ubos": [], + "ubo_names": [], + "vertex_included_files": [], + "fragment_included_files": [], + "reading": "fragment", + "line_offset": 33, + "vertex_offset": 10, + "fragment_offset": 23, + "variant_defines": [ + "#define USE_NINEPATCH" + ], + "variant_names": [ + "MODE_NINEPATCH" + ], + "specialization_names": [ + "DISABLE_LIGHTING" + ], + "specialization_values": [ + " false\n" + ] +} diff --git a/tests/python_build/fixtures/glsl/_included.glsl b/tests/python_build/fixtures/glsl/_included.glsl new file mode 100644 index 0000000000..adf5f702d3 --- /dev/null +++ b/tests/python_build/fixtures/glsl/_included.glsl @@ -0,0 +1 @@ +#define M_PI 3.14159265359 diff --git a/tests/python_build/fixtures/glsl/compute.glsl b/tests/python_build/fixtures/glsl/compute.glsl new file mode 100644 index 0000000000..e81f48d463 --- /dev/null +++ b/tests/python_build/fixtures/glsl/compute.glsl @@ -0,0 +1,12 @@ +#[compute] + +#version 450 + +#VERSION_DEFINES + + +#include "_included.glsl" + +void main() { + vec3 static_light = vec3(0, 1, 0); +} diff --git a/tests/python_build/fixtures/glsl/compute_expected_full.glsl b/tests/python_build/fixtures/glsl/compute_expected_full.glsl new file mode 100644 index 0000000000..b937d732c8 --- /dev/null +++ b/tests/python_build/fixtures/glsl/compute_expected_full.glsl @@ -0,0 +1,8 @@ +/* WARNING, THIS FILE WAS GENERATED, DO NOT EDIT */ +#ifndef COMPUTE_SHADER_GLSL_RAW_H +#define COMPUTE_SHADER_GLSL_RAW_H + +static const char compute_shader_glsl[] = { + 35,91,99,111,109,112,117,116,101,93,10,10,35,118,101,114,115,105,111,110,32,52,53,48,10,10,35,86,69,82,83,73,79,78,95,68,69,70,73,78,69,83,10,10,10,35,100,101,102,105,110,101,32,77,95,80,73,32,51,46,49,52,49,53,57,50,54,53,51,53,57,10,10,118,111,105,100,32,109,97,105,110,40,41,32,123,10,9,118,101,99,51,32,115,116,97,116,105,99,95,108,105,103,104,116,32,61,32,118,101,99,51,40,48,44,32,49,44,32,48,41,59,10,125,10,0 +}; +#endif diff --git a/tests/python_build/fixtures/glsl/compute_expected_parts.json b/tests/python_build/fixtures/glsl/compute_expected_parts.json new file mode 100644 index 0000000000..025c568ae0 --- /dev/null +++ b/tests/python_build/fixtures/glsl/compute_expected_parts.json @@ -0,0 +1,3 @@ +{ + "code": "#[compute]\n\n#version 450\n\n#VERSION_DEFINES\n\n\n#define M_PI 3.14159265359\n\nvoid main() {\n\tvec3 static_light = vec3(0, 1, 0);\n}\n" +} diff --git a/tests/python_build/fixtures/glsl/vertex_fragment.glsl b/tests/python_build/fixtures/glsl/vertex_fragment.glsl new file mode 100644 index 0000000000..0bdce783d7 --- /dev/null +++ b/tests/python_build/fixtures/glsl/vertex_fragment.glsl @@ -0,0 +1,32 @@ +#[versions] + +lines = "#define MODE_LINES"; + +#[vertex] + +#version 450 + +#VERSION_DEFINES + +layout(location = 0) out vec3 uv_interp; + +void main() { + +#ifdef MODE_LINES + uv_interp = vec3(0,0,1); +#endif +} + +#[fragment] + +#version 450 + +#VERSION_DEFINES + +#include "_included.glsl" + +layout(location = 0) out vec4 dst_color; + +void main() { + dst_color = vec4(1,1,0,0); +} diff --git a/tests/python_build/fixtures/glsl/vertex_fragment_expected_full.glsl b/tests/python_build/fixtures/glsl/vertex_fragment_expected_full.glsl new file mode 100644 index 0000000000..3f53a17fac --- /dev/null +++ b/tests/python_build/fixtures/glsl/vertex_fragment_expected_full.glsl @@ -0,0 +1,8 @@ +/* WARNING, THIS FILE WAS GENERATED, DO NOT EDIT */ +#ifndef VERTEX_FRAGMENT_SHADER_GLSL_RAW_H +#define VERTEX_FRAGMENT_SHADER_GLSL_RAW_H + +static const char vertex_fragment_shader_glsl[] = { + 35,91,118,101,114,115,105,111,110,115,93,10,10,108,105,110,101,115,32,61,32,34,35,100,101,102,105,110,101,32,77,79,68,69,95,76,73,78,69,83,34,59,10,10,35,91,118,101,114,116,101,120,93,10,10,35,118,101,114,115,105,111,110,32,52,53,48,10,10,35,86,69,82,83,73,79,78,95,68,69,70,73,78,69,83,10,10,108,97,121,111,117,116,40,108,111,99,97,116,105,111,110,32,61,32,48,41,32,111,117,116,32,118,101,99,51,32,117,118,95,105,110,116,101,114,112,59,10,10,118,111,105,100,32,109,97,105,110,40,41,32,123,10,10,35,105,102,100,101,102,32,77,79,68,69,95,76,73,78,69,83,10,9,117,118,95,105,110,116,101,114,112,32,61,32,118,101,99,51,40,48,44,48,44,49,41,59,10,35,101,110,100,105,102,10,125,10,10,35,91,102,114,97,103,109,101,110,116,93,10,10,35,118,101,114,115,105,111,110,32,52,53,48,10,10,35,86,69,82,83,73,79,78,95,68,69,70,73,78,69,83,10,10,35,100,101,102,105,110,101,32,77,95,80,73,32,51,46,49,52,49,53,57,50,54,53,51,53,57,10,10,108,97,121,111,117,116,40,108,111,99,97,116,105,111,110,32,61,32,48,41,32,111,117,116,32,118,101,99,52,32,100,115,116,95,99,111,108,111,114,59,10,10,118,111,105,100,32,109,97,105,110,40,41,32,123,10,9,100,115,116,95,99,111,108,111,114,32,61,32,118,101,99,52,40,49,44,49,44,48,44,48,41,59,10,125,10,0 +}; +#endif diff --git a/tests/python_build/fixtures/glsl/vertex_fragment_expected_parts.json b/tests/python_build/fixtures/glsl/vertex_fragment_expected_parts.json new file mode 100644 index 0000000000..38312367a0 --- /dev/null +++ b/tests/python_build/fixtures/glsl/vertex_fragment_expected_parts.json @@ -0,0 +1,3 @@ +{ + "code": "#[versions]\n\nlines = \"#define MODE_LINES\";\n\n#[vertex]\n\n#version 450\n\n#VERSION_DEFINES\n\nlayout(location = 0) out vec3 uv_interp;\n\nvoid main() {\n\n#ifdef MODE_LINES\n\tuv_interp = vec3(0,0,1);\n#endif\n}\n\n#[fragment]\n\n#version 450\n\n#VERSION_DEFINES\n\n#define M_PI 3.14159265359\n\nlayout(location = 0) out vec4 dst_color;\n\nvoid main() {\n\tdst_color = vec4(1,1,0,0);\n}\n" +} diff --git a/tests/python_build/fixtures/rd_glsl/_included.glsl b/tests/python_build/fixtures/rd_glsl/_included.glsl new file mode 100644 index 0000000000..adf5f702d3 --- /dev/null +++ b/tests/python_build/fixtures/rd_glsl/_included.glsl @@ -0,0 +1 @@ +#define M_PI 3.14159265359 diff --git a/tests/python_build/fixtures/rd_glsl/compute.glsl b/tests/python_build/fixtures/rd_glsl/compute.glsl new file mode 100644 index 0000000000..66fbbeb401 --- /dev/null +++ b/tests/python_build/fixtures/rd_glsl/compute.glsl @@ -0,0 +1,13 @@ +#[compute] + +#version 450 + +#VERSION_DEFINES + +#define BLOCK_SIZE 8 + +#include "_included.glsl" + +void main() { + uint t = BLOCK_SIZE + 1; +} diff --git a/tests/python_build/fixtures/rd_glsl/compute_expected_full.glsl b/tests/python_build/fixtures/rd_glsl/compute_expected_full.glsl new file mode 100644 index 0000000000..b59923e28a --- /dev/null +++ b/tests/python_build/fixtures/rd_glsl/compute_expected_full.glsl @@ -0,0 +1,20 @@ +/* WARNING, THIS FILE WAS GENERATED, DO NOT EDIT */ +#ifndef COMPUTE_GLSL_GEN_H_RD +#define COMPUTE_GLSL_GEN_H_RD + +#include "servers/rendering/renderer_rd/shader_rd.h" + +class ComputeShaderRD : public ShaderRD { + +public: + + ComputeShaderRD() { + + static const char _compute_code[] = { +10,35,118,101,114,115,105,111,110,32,52,53,48,10,10,35,86,69,82,83,73,79,78,95,68,69,70,73,78,69,83,10,10,35,100,101,102,105,110,101,32,66,76,79,67,75,95,83,73,90,69,32,56,10,10,35,100,101,102,105,110,101,32,77,95,80,73,32,51,46,49,52,49,53,57,50,54,53,51,53,57,10,10,118,111,105,100,32,109,97,105,110,40,41,32,123,10,9,117,105,110,116,32,116,32,61,32,66,76,79,67,75,95,83,73,90,69,32,43,32,49,59,10,125,10,0 + }; + setup(nullptr, nullptr, _compute_code, "ComputeShaderRD"); + } +}; + +#endif diff --git a/tests/python_build/fixtures/rd_glsl/compute_expected_parts.json b/tests/python_build/fixtures/rd_glsl/compute_expected_parts.json new file mode 100644 index 0000000000..26ba9e4fc4 --- /dev/null +++ b/tests/python_build/fixtures/rd_glsl/compute_expected_parts.json @@ -0,0 +1,28 @@ +{ + "vertex_lines": [], + "fragment_lines": [], + "compute_lines": [ + "", + "#version 450", + "", + "#VERSION_DEFINES", + "", + "#define BLOCK_SIZE 8", + "", + "#define M_PI 3.14159265359", + "", + "void main() {", + "\tuint t = BLOCK_SIZE + 1;", + "}" + ], + "vertex_included_files": [], + "fragment_included_files": [], + "compute_included_files": [ + "tests/python_build/fixtures/rd_glsl/_included.glsl" + ], + "reading": "compute", + "line_offset": 13, + "vertex_offset": 0, + "fragment_offset": 0, + "compute_offset": 1 +} diff --git a/tests/python_build/fixtures/rd_glsl/vertex_fragment.glsl b/tests/python_build/fixtures/rd_glsl/vertex_fragment.glsl new file mode 100644 index 0000000000..27be08a857 --- /dev/null +++ b/tests/python_build/fixtures/rd_glsl/vertex_fragment.glsl @@ -0,0 +1,25 @@ +#[vertex] + +#version 450 + +#VERSION_DEFINES + +#include "_included.glsl" + +layout(location = 0) out vec2 uv_interp; + +void main() { + uv_interp = vec2(0, 1); +} + +#[fragment] + +#version 450 + +#VERSION_DEFINES + +layout(location = 0) in vec2 uv_interp; + +void main() { + uv_interp = vec2(1, 0); +} diff --git a/tests/python_build/fixtures/rd_glsl/vertex_fragment_expected_full.glsl b/tests/python_build/fixtures/rd_glsl/vertex_fragment_expected_full.glsl new file mode 100644 index 0000000000..ff804dbf89 --- /dev/null +++ b/tests/python_build/fixtures/rd_glsl/vertex_fragment_expected_full.glsl @@ -0,0 +1,23 @@ +/* WARNING, THIS FILE WAS GENERATED, DO NOT EDIT */ +#ifndef VERTEX_FRAGMENT_GLSL_GEN_H_RD +#define VERTEX_FRAGMENT_GLSL_GEN_H_RD + +#include "servers/rendering/renderer_rd/shader_rd.h" + +class VertexFragmentShaderRD : public ShaderRD { + +public: + + VertexFragmentShaderRD() { + + static const char _vertex_code[] = { +10,35,118,101,114,115,105,111,110,32,52,53,48,10,10,35,86,69,82,83,73,79,78,95,68,69,70,73,78,69,83,10,10,35,100,101,102,105,110,101,32,77,95,80,73,32,51,46,49,52,49,53,57,50,54,53,51,53,57,10,10,108,97,121,111,117,116,40,108,111,99,97,116,105,111,110,32,61,32,48,41,32,111,117,116,32,118,101,99,50,32,117,118,95,105,110,116,101,114,112,59,10,10,118,111,105,100,32,109,97,105,110,40,41,32,123,10,9,117,118,95,105,110,116,101,114,112,32,61,32,118,101,99,50,40,48,44,32,49,41,59,10,125,10,10,0 + }; + static const char _fragment_code[] = { +10,35,118,101,114,115,105,111,110,32,52,53,48,10,10,35,86,69,82,83,73,79,78,95,68,69,70,73,78,69,83,10,10,108,97,121,111,117,116,40,108,111,99,97,116,105,111,110,32,61,32,48,41,32,105,110,32,118,101,99,50,32,117,118,95,105,110,116,101,114,112,59,10,10,118,111,105,100,32,109,97,105,110,40,41,32,123,10,9,117,118,95,105,110,116,101,114,112,32,61,32,118,101,99,50,40,49,44,32,48,41,59,10,125,10,0 + }; + setup(_vertex_code, _fragment_code, nullptr, "VertexFragmentShaderRD"); + } +}; + +#endif diff --git a/tests/python_build/fixtures/rd_glsl/vertex_fragment_expected_parts.json b/tests/python_build/fixtures/rd_glsl/vertex_fragment_expected_parts.json new file mode 100644 index 0000000000..dbf833edea --- /dev/null +++ b/tests/python_build/fixtures/rd_glsl/vertex_fragment_expected_parts.json @@ -0,0 +1,40 @@ +{ + "vertex_lines": [ + "", + "#version 450", + "", + "#VERSION_DEFINES", + "", + "#define M_PI 3.14159265359", + "", + "layout(location = 0) out vec2 uv_interp;", + "", + "void main() {", + "\tuv_interp = vec2(0, 1);", + "}", + "" + ], + "fragment_lines": [ + "", + "#version 450", + "", + "#VERSION_DEFINES", + "", + "layout(location = 0) in vec2 uv_interp;", + "", + "void main() {", + "\tuv_interp = vec2(1, 0);", + "}" + ], + "compute_lines": [], + "vertex_included_files": [ + "tests/python_build/fixtures/rd_glsl/_included.glsl" + ], + "fragment_included_files": [], + "compute_included_files": [], + "reading": "fragment", + "line_offset": 25, + "vertex_offset": 1, + "fragment_offset": 15, + "compute_offset": 0 +} diff --git a/tests/python_build/test_gles3_builder.py b/tests/python_build/test_gles3_builder.py new file mode 100644 index 0000000000..861e0b84c4 --- /dev/null +++ b/tests/python_build/test_gles3_builder.py @@ -0,0 +1,31 @@ +import json + +import pytest + +from gles3_builders import build_gles3_header, GLES3HeaderStruct + + +@pytest.mark.parametrize( + ["shader_files", "builder", "header_struct"], + [ + ("gles3/vertex_fragment", build_gles3_header, GLES3HeaderStruct), + ], + indirect=["shader_files"], +) +def test_gles3_builder(shader_files, builder, header_struct): + header = header_struct() + + builder(shader_files["path_input"], "drivers/gles3/shader_gles3.h", "GLES3", header_data=header) + + with open(shader_files["path_expected_parts"], "r") as f: + expected_parts = json.load(f) + assert expected_parts == header.__dict__ + + with open(shader_files["path_output"], "r") as f: + actual_output = f.read() + assert actual_output + + with open(shader_files["path_expected_full"], "r") as f: + expected_output = f.read() + + assert actual_output == expected_output diff --git a/tests/python_build/test_glsl_builder.py b/tests/python_build/test_glsl_builder.py new file mode 100644 index 0000000000..b9dcef48ac --- /dev/null +++ b/tests/python_build/test_glsl_builder.py @@ -0,0 +1,37 @@ +import json + +import pytest + +from glsl_builders import build_raw_header, RAWHeaderStruct, build_rd_header, RDHeaderStruct + + +@pytest.mark.parametrize( + [ + "shader_files", + "builder", + "header_struct", + ], + [ + ("glsl/vertex_fragment", build_raw_header, RAWHeaderStruct), + ("glsl/compute", build_raw_header, RAWHeaderStruct), + ("rd_glsl/vertex_fragment", build_rd_header, RDHeaderStruct), + ("rd_glsl/compute", build_rd_header, RDHeaderStruct), + ], + indirect=["shader_files"], +) +def test_glsl_builder(shader_files, builder, header_struct): + header = header_struct() + builder(shader_files["path_input"], header_data=header) + + with open(shader_files["path_expected_parts"], "r") as f: + expected_parts = json.load(f) + assert expected_parts == header.__dict__ + + with open(shader_files["path_output"], "r") as f: + actual_output = f.read() + assert actual_output + + with open(shader_files["path_expected_full"], "r") as f: + expected_output = f.read() + + assert actual_output == expected_output diff --git a/tests/scene/test_code_edit.h b/tests/scene/test_code_edit.h index 7605f24cf8..be2e18bdf4 100644 --- a/tests/scene/test_code_edit.h +++ b/tests/scene/test_code_edit.h @@ -74,7 +74,7 @@ TEST_CASE("[SceneTree][CodeEdit] line gutters") { code_edit->set_line_as_breakpoint(0, true); CHECK(code_edit->is_line_breakpointed(0)); - CHECK(code_edit->get_breakpointed_lines()[0] == Variant(0)); + CHECK(code_edit->get_breakpointed_lines()[0] == 0); SIGNAL_CHECK("breakpoint_toggled", args); code_edit->set_line_as_breakpoint(0, false); @@ -451,7 +451,7 @@ TEST_CASE("[SceneTree][CodeEdit] line gutters") { ERR_PRINT_ON; code_edit->set_line_as_bookmarked(0, true); - CHECK(code_edit->get_bookmarked_lines()[0] == Variant(0)); + CHECK(code_edit->get_bookmarked_lines()[0] == 0); CHECK(code_edit->is_line_bookmarked(0)); code_edit->set_line_as_bookmarked(0, false); @@ -657,7 +657,7 @@ TEST_CASE("[SceneTree][CodeEdit] line gutters") { ERR_PRINT_ON; code_edit->set_line_as_executing(0, true); - CHECK(code_edit->get_executing_lines()[0] == Variant(0)); + CHECK(code_edit->get_executing_lines()[0] == 0); CHECK(code_edit->is_line_executing(0)); code_edit->set_line_as_executing(0, false); @@ -2943,6 +2943,10 @@ TEST_CASE("[SceneTree][CodeEdit] completion") { code_edit->set_code_completion_enabled(true); CHECK(code_edit->get_code_completion_selected_index() == -1); + // Need to flush here since `NOTIFICATION_THEME_CHANGED` is called deferred from `NOTIFICATION_ENTER_TREE`, + // and `update_code_completion_options` requires access to the theme's font size. + MessageQueue::get_singleton()->flush(); + code_edit->update_code_completion_options(); code_edit->set_code_completion_selected_index(1); CHECK(code_edit->get_code_completion_selected_index() == -1); diff --git a/tests/scene/test_path_follow_2d.h b/tests/scene/test_path_follow_2d.h index abd12fe862..57261116a2 100644 --- a/tests/scene/test_path_follow_2d.h +++ b/tests/scene/test_path_follow_2d.h @@ -37,7 +37,7 @@ namespace TestPathFollow2D { -TEST_CASE("[PathFollow2D] Sampling with unit offset") { +TEST_CASE("[PathFollow2D] Sampling with progress ratio") { const Ref<Curve2D> &curve = memnew(Curve2D()); curve->add_point(Vector2(0, 0)); curve->add_point(Vector2(100, 0)); @@ -49,37 +49,37 @@ TEST_CASE("[PathFollow2D] Sampling with unit offset") { const PathFollow2D *path_follow_2d = memnew(PathFollow2D); path->add_child(path_follow_2d); - path_follow_2d->set_unit_offset(0); + path_follow_2d->set_progress_ratio(0); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(0, 0))); - path_follow_2d->set_unit_offset(0.125); + path_follow_2d->set_progress_ratio(0.125); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(50, 0))); - path_follow_2d->set_unit_offset(0.25); + path_follow_2d->set_progress_ratio(0.25); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(100, 0))); - path_follow_2d->set_unit_offset(0.375); + path_follow_2d->set_progress_ratio(0.375); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(100, 50))); - path_follow_2d->set_unit_offset(0.5); + path_follow_2d->set_progress_ratio(0.5); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(100, 100))); - path_follow_2d->set_unit_offset(0.625); + path_follow_2d->set_progress_ratio(0.625); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(50, 100))); - path_follow_2d->set_unit_offset(0.75); + path_follow_2d->set_progress_ratio(0.75); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(0, 100))); - path_follow_2d->set_unit_offset(0.875); + path_follow_2d->set_progress_ratio(0.875); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(0, 50))); - path_follow_2d->set_unit_offset(1); + path_follow_2d->set_progress_ratio(1); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(0, 0))); memdelete(path); } -TEST_CASE("[PathFollow2D] Sampling with offset") { +TEST_CASE("[PathFollow2D] Sampling with progress") { const Ref<Curve2D> &curve = memnew(Curve2D()); curve->add_point(Vector2(0, 0)); curve->add_point(Vector2(100, 0)); @@ -91,31 +91,31 @@ TEST_CASE("[PathFollow2D] Sampling with offset") { const PathFollow2D *path_follow_2d = memnew(PathFollow2D); path->add_child(path_follow_2d); - path_follow_2d->set_offset(0); + path_follow_2d->set_progress(0); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(0, 0))); - path_follow_2d->set_offset(50); + path_follow_2d->set_progress(50); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(50, 0))); - path_follow_2d->set_offset(100); + path_follow_2d->set_progress(100); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(100, 0))); - path_follow_2d->set_offset(150); + path_follow_2d->set_progress(150); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(100, 50))); - path_follow_2d->set_offset(200); + path_follow_2d->set_progress(200); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(100, 100))); - path_follow_2d->set_offset(250); + path_follow_2d->set_progress(250); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(50, 100))); - path_follow_2d->set_offset(300); + path_follow_2d->set_progress(300); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(0, 100))); - path_follow_2d->set_offset(350); + path_follow_2d->set_progress(350); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(0, 50))); - path_follow_2d->set_offset(400); + path_follow_2d->set_progress(400); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(0, 0))); memdelete(path); @@ -131,7 +131,7 @@ TEST_CASE("[PathFollow2D] Removal of a point in curve") { const PathFollow2D *path_follow_2d = memnew(PathFollow2D); path->add_child(path_follow_2d); - path_follow_2d->set_unit_offset(0.5); + path_follow_2d->set_progress_ratio(0.5); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(100, 0))); curve->remove_point(1); @@ -152,7 +152,7 @@ TEST_CASE("[PathFollow2D] Setting h_offset and v_offset") { const PathFollow2D *path_follow_2d = memnew(PathFollow2D); path->add_child(path_follow_2d); - path_follow_2d->set_unit_offset(0.5); + path_follow_2d->set_progress_ratio(0.5); CHECK(path_follow_2d->get_transform().get_origin().is_equal_approx(Vector2(50, 0))); path_follow_2d->set_h_offset(25); @@ -175,32 +175,32 @@ TEST_CASE("[PathFollow2D] Unit offset out of range") { path_follow_2d->set_loop(true); - path_follow_2d->set_unit_offset(-0.3); + path_follow_2d->set_progress_ratio(-0.3); CHECK_MESSAGE( - path_follow_2d->get_unit_offset() == 0.7, - "Unit Offset should loop back from the end in the opposite direction"); + path_follow_2d->get_progress_ratio() == 0.7, + "Progress Ratio should loop back from the end in the opposite direction"); - path_follow_2d->set_unit_offset(1.3); + path_follow_2d->set_progress_ratio(1.3); CHECK_MESSAGE( - path_follow_2d->get_unit_offset() == 0.3, - "Unit Offset should loop back from the end in the opposite direction"); + path_follow_2d->get_progress_ratio() == 0.3, + "Progress Ratio should loop back from the end in the opposite direction"); path_follow_2d->set_loop(false); - path_follow_2d->set_unit_offset(-0.3); + path_follow_2d->set_progress_ratio(-0.3); CHECK_MESSAGE( - path_follow_2d->get_unit_offset() == 0, - "Unit Offset should be clamped at 0"); + path_follow_2d->get_progress_ratio() == 0, + "Progress Ratio should be clamped at 0"); - path_follow_2d->set_unit_offset(1.3); + path_follow_2d->set_progress_ratio(1.3); CHECK_MESSAGE( - path_follow_2d->get_unit_offset() == 1, - "Unit Offset should be clamped at 1"); + path_follow_2d->get_progress_ratio() == 1, + "Progress Ratio should be clamped at 1"); memdelete(path); } -TEST_CASE("[PathFollow2D] Offset out of range") { +TEST_CASE("[PathFollow2D] Progress out of range") { const Ref<Curve2D> &curve = memnew(Curve2D()); curve->add_point(Vector2(0, 0)); curve->add_point(Vector2(100, 0)); @@ -211,27 +211,27 @@ TEST_CASE("[PathFollow2D] Offset out of range") { path_follow_2d->set_loop(true); - path_follow_2d->set_offset(-50); + path_follow_2d->set_progress(-50); CHECK_MESSAGE( - path_follow_2d->get_offset() == 50, - "Offset should loop back from the end in the opposite direction"); + path_follow_2d->get_progress() == 50, + "Progress should loop back from the end in the opposite direction"); - path_follow_2d->set_offset(150); + path_follow_2d->set_progress(150); CHECK_MESSAGE( - path_follow_2d->get_offset() == 50, - "Offset should loop back from the end in the opposite direction"); + path_follow_2d->get_progress() == 50, + "Progress should loop back from the end in the opposite direction"); path_follow_2d->set_loop(false); - path_follow_2d->set_offset(-50); + path_follow_2d->set_progress(-50); CHECK_MESSAGE( - path_follow_2d->get_offset() == 0, - "Offset should be clamped at 0"); + path_follow_2d->get_progress() == 0, + "Progress should be clamped at 0"); - path_follow_2d->set_offset(150); + path_follow_2d->set_progress(150); CHECK_MESSAGE( - path_follow_2d->get_offset() == 100, - "Offset should be clamped at 1"); + path_follow_2d->get_progress() == 100, + "Progress should be clamped at 1"); memdelete(path); } diff --git a/tests/scene/test_path_follow_3d.h b/tests/scene/test_path_follow_3d.h index 9ffe49e3d6..6334fa56de 100644 --- a/tests/scene/test_path_follow_3d.h +++ b/tests/scene/test_path_follow_3d.h @@ -37,7 +37,7 @@ namespace TestPathFollow3D { -TEST_CASE("[PathFollow3D] Sampling with unit offset") { +TEST_CASE("[PathFollow3D] Sampling with progress ratio") { const Ref<Curve3D> &curve = memnew(Curve3D()); curve->add_point(Vector3(0, 0, 0)); curve->add_point(Vector3(100, 0, 0)); @@ -49,37 +49,37 @@ TEST_CASE("[PathFollow3D] Sampling with unit offset") { const PathFollow3D *path_follow_3d = memnew(PathFollow3D); path->add_child(path_follow_3d); - path_follow_3d->set_unit_offset(0); + path_follow_3d->set_progress_ratio(0); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(0, 0, 0)); - path_follow_3d->set_unit_offset(0.125); + path_follow_3d->set_progress_ratio(0.125); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(50, 0, 0)); - path_follow_3d->set_unit_offset(0.25); + path_follow_3d->set_progress_ratio(0.25); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 0, 0); - path_follow_3d->set_unit_offset(0.375); + path_follow_3d->set_progress_ratio(0.375); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 50, 0))); - path_follow_3d->set_unit_offset(0.5); + path_follow_3d->set_progress_ratio(0.5); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 100, 0))); - path_follow_3d->set_unit_offset(0.625); + path_follow_3d->set_progress_ratio(0.625); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 100, 50))); - path_follow_3d->set_unit_offset(0.75); + path_follow_3d->set_progress_ratio(0.75); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 100, 100))); - path_follow_3d->set_unit_offset(0.875); + path_follow_3d->set_progress_ratio(0.875); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 50, 100))); - path_follow_3d->set_unit_offset(1); + path_follow_3d->set_progress_ratio(1); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 0, 100))); memdelete(path); } -TEST_CASE("[PathFollow3D] Sampling with offset") { +TEST_CASE("[PathFollow3D] Sampling with progress") { const Ref<Curve3D> &curve = memnew(Curve3D()); curve->add_point(Vector3(0, 0, 0)); curve->add_point(Vector3(100, 0, 0)); @@ -91,31 +91,31 @@ TEST_CASE("[PathFollow3D] Sampling with offset") { const PathFollow3D *path_follow_3d = memnew(PathFollow3D); path->add_child(path_follow_3d); - path_follow_3d->set_offset(0); + path_follow_3d->set_progress(0); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(0, 0, 0)); - path_follow_3d->set_offset(50); + path_follow_3d->set_progress(50); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(50, 0, 0)); - path_follow_3d->set_offset(100); + path_follow_3d->set_progress(100); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 0, 0); - path_follow_3d->set_offset(150); + path_follow_3d->set_progress(150); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 50, 0))); - path_follow_3d->set_offset(200); + path_follow_3d->set_progress(200); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 100, 0))); - path_follow_3d->set_offset(250); + path_follow_3d->set_progress(250); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 100, 50))); - path_follow_3d->set_offset(300); + path_follow_3d->set_progress(300); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 100, 100))); - path_follow_3d->set_offset(350); + path_follow_3d->set_progress(350); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 50, 100))); - path_follow_3d->set_offset(400); + path_follow_3d->set_progress(400); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector3(100, 0, 100))); memdelete(path); @@ -131,7 +131,7 @@ TEST_CASE("[PathFollow3D] Removal of a point in curve") { const PathFollow3D *path_follow_3d = memnew(PathFollow3D); path->add_child(path_follow_3d); - path_follow_3d->set_unit_offset(0.5); + path_follow_3d->set_progress_ratio(0.5); CHECK(path_follow_3d->get_transform().get_origin().is_equal_approx(Vector2(100, 0, 0))); curve->remove_point(1); @@ -143,7 +143,7 @@ TEST_CASE("[PathFollow3D] Removal of a point in curve") { memdelete(path); } -TEST_CASE("[PathFollow3D] Unit offset out of range") { +TEST_CASE("[PathFollow3D] Progress ratio out of range") { const Ref<Curve3D> &curve = memnew(Curve3D()); curve->add_point(Vector3(0, 0, 0)); curve->add_point(Vector3(100, 0, 0)); @@ -154,32 +154,32 @@ TEST_CASE("[PathFollow3D] Unit offset out of range") { path_follow_3d->set_loop(true); - path_follow_3d->set_unit_offset(-0.3); + path_follow_3d->set_progress_ratio(-0.3); CHECK_MESSAGE( - path_follow_3d->get_unit_offset() == 0.7, - "Unit Offset should loop back from the end in the opposite direction"); + path_follow_3d->get_progress_ratio() == 0.7, + "Progress Ratio should loop back from the end in the opposite direction"); - path_follow_3d->set_unit_offset(1.3); + path_follow_3d->set_progress_ratio(1.3); CHECK_MESSAGE( - path_follow_3d->get_unit_offset() == 0.3, - "Unit Offset should loop back from the end in the opposite direction"); + path_follow_3d->get_progress_ratio() == 0.3, + "Progress Ratio should loop back from the end in the opposite direction"); path_follow_3d->set_loop(false); - path_follow_3d->set_unit_offset(-0.3); + path_follow_3d->set_progress_ratio(-0.3); CHECK_MESSAGE( - path_follow_3d->get_unit_offset() == 0, - "Unit Offset should be clamped at 0"); + path_follow_3d->get_progress_ratio() == 0, + "Progress Ratio should be clamped at 0"); - path_follow_3d->set_unit_offset(1.3); + path_follow_3d->set_progress_ratio(1.3); CHECK_MESSAGE( - path_follow_3d->get_unit_offset() == 1, - "Unit Offset should be clamped at 1"); + path_follow_3d->get_progress_ratio() == 1, + "Progress Ratio should be clamped at 1"); memdelete(path); } -TEST_CASE("[PathFollow3D] Offset out of range") { +TEST_CASE("[PathFollow3D] Progress out of range") { const Ref<Curve3D> &curve = memnew(Curve3D()); curve->add_point(Vector3(0, 0, 0)); curve->add_point(Vector3(100, 0, 0)); @@ -190,27 +190,27 @@ TEST_CASE("[PathFollow3D] Offset out of range") { path_follow_3d->set_loop(true); - path_follow_3d->set_offset(-50); + path_follow_3d->set_progress(-50); CHECK_MESSAGE( - path_follow_3d->get_offset() == 50, - "Offset should loop back from the end in the opposite direction"); + path_follow_3d->get_progress() == 50, + "Progress should loop back from the end in the opposite direction"); - path_follow_3d->set_offset(150); + path_follow_3d->set_progress(150); CHECK_MESSAGE( - path_follow_3d->get_offset() == 50, - "Offset should loop back from the end in the opposite direction"); + path_follow_3d->get_progress() == 50, + "Progress should loop back from the end in the opposite direction"); path_follow_3d->set_loop(false); - path_follow_3d->set_offset(-50); + path_follow_3d->set_progress(-50); CHECK_MESSAGE( - path_follow_3d->get_offset() == 0, - "Offset should be clamped at 0"); + path_follow_3d->get_progress() == 0, + "Progress should be clamped at 0"); - path_follow_3d->set_offset(150); + path_follow_3d->set_progress(150); CHECK_MESSAGE( - path_follow_3d->get_offset() == 100, - "Offset should be clamped at max value of curve"); + path_follow_3d->get_progress() == 100, + "Progress should be clamped at max value of curve"); memdelete(path); } |