diff options
Diffstat (limited to 'modules/webrtc/doc_classes')
| -rw-r--r-- | modules/webrtc/doc_classes/WebRTCDataChannel.xml | 39 | ||||
| -rw-r--r-- | modules/webrtc/doc_classes/WebRTCMultiplayerPeer.xml (renamed from modules/webrtc/doc_classes/WebRTCMultiplayer.xml) | 61 | ||||
| -rw-r--r-- | modules/webrtc/doc_classes/WebRTCPeerConnection.xml | 79 |
3 files changed, 68 insertions, 111 deletions
diff --git a/modules/webrtc/doc_classes/WebRTCDataChannel.xml b/modules/webrtc/doc_classes/WebRTCDataChannel.xml index 5c90038b9a..cf5735bab5 100644 --- a/modules/webrtc/doc_classes/WebRTCDataChannel.xml +++ b/modules/webrtc/doc_classes/WebRTCDataChannel.xml @@ -8,81 +8,76 @@ </tutorials> <methods> <method name="close"> - <return type="void"> - </return> + <return type="void" /> <description> Closes this data channel, notifying the other peer. </description> </method> + <method name="get_buffered_amount" qualifiers="const"> + <return type="int" /> + <description> + Returns the number of bytes currently queued to be sent over this channel. + </description> + </method> <method name="get_id" qualifiers="const"> - <return type="int"> - </return> + <return type="int" /> <description> Returns the id assigned to this channel during creation (or auto-assigned during negotiation). If the channel is not negotiated out-of-band the id will only be available after the connection is established (will return [code]65535[/code] until then). </description> </method> <method name="get_label" qualifiers="const"> - <return type="String"> - </return> + <return type="String" /> <description> Returns the label assigned to this channel during creation. </description> </method> <method name="get_max_packet_life_time" qualifiers="const"> - <return type="int"> - </return> + <return type="int" /> <description> Returns the [code]maxPacketLifeTime[/code] value assigned to this channel during creation. Will be [code]65535[/code] if not specified. </description> </method> <method name="get_max_retransmits" qualifiers="const"> - <return type="int"> - </return> + <return type="int" /> <description> Returns the [code]maxRetransmits[/code] value assigned to this channel during creation. Will be [code]65535[/code] if not specified. </description> </method> <method name="get_protocol" qualifiers="const"> - <return type="String"> - </return> + <return type="String" /> <description> Returns the sub-protocol assigned to this channel during creation. An empty string if not specified. </description> </method> <method name="get_ready_state" qualifiers="const"> - <return type="int" enum="WebRTCDataChannel.ChannelState"> - </return> + <return type="int" enum="WebRTCDataChannel.ChannelState" /> <description> Returns the current state of this channel, see [enum ChannelState]. </description> </method> <method name="is_negotiated" qualifiers="const"> - <return type="bool"> - </return> + <return type="bool" /> <description> Returns [code]true[/code] if this channel was created with out-of-band configuration. </description> </method> <method name="is_ordered" qualifiers="const"> - <return type="bool"> - </return> + <return type="bool" /> <description> Returns [code]true[/code] if this channel was created with ordering enabled (default). </description> </method> <method name="poll"> - <return type="int" enum="Error"> - </return> + <return type="int" enum="Error" /> <description> Reserved, but not used for now. </description> </method> <method name="was_string_packet" qualifiers="const"> - <return type="bool"> - </return> + <return type="bool" /> <description> Returns [code]true[/code] if the last received packet was transferred as text. See [member write_mode]. </description> diff --git a/modules/webrtc/doc_classes/WebRTCMultiplayer.xml b/modules/webrtc/doc_classes/WebRTCMultiplayerPeer.xml index 5b9459bc27..43a8e20ef7 100644 --- a/modules/webrtc/doc_classes/WebRTCMultiplayer.xml +++ b/modules/webrtc/doc_classes/WebRTCMultiplayerPeer.xml @@ -1,88 +1,75 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="WebRTCMultiplayer" inherits="NetworkedMultiplayerPeer" version="4.0"> +<class name="WebRTCMultiplayerPeer" inherits="MultiplayerPeer" version="4.0"> <brief_description> A simple interface to create a peer-to-peer mesh network composed of [WebRTCPeerConnection] that is compatible with the [MultiplayerAPI]. </brief_description> <description> - This class constructs a full mesh of [WebRTCPeerConnection] (one connection for each peer) that can be used as a [member MultiplayerAPI.network_peer]. + This class constructs a full mesh of [WebRTCPeerConnection] (one connection for each peer) that can be used as a [member MultiplayerAPI.multiplayer_peer]. You can add each [WebRTCPeerConnection] via [method add_peer] or remove them via [method remove_peer]. Peers must be added in [constant WebRTCPeerConnection.STATE_NEW] state to allow it to create the appropriate channels. This class will not create offers nor set descriptions, it will only poll them, and notify connections and disconnections. - [signal NetworkedMultiplayerPeer.connection_succeeded] and [signal NetworkedMultiplayerPeer.server_disconnected] will not be emitted unless [code]server_compatibility[/code] is [code]true[/code] in [method initialize]. Beside that data transfer works like in a [NetworkedMultiplayerPeer]. + [signal MultiplayerPeer.connection_succeeded] and [signal MultiplayerPeer.server_disconnected] will not be emitted unless [code]server_compatibility[/code] is [code]true[/code] in [method initialize]. Beside that data transfer works like in a [MultiplayerPeer]. </description> <tutorials> </tutorials> <methods> <method name="add_peer"> - <return type="int" enum="Error"> - </return> - <argument index="0" name="peer" type="WebRTCPeerConnection"> - </argument> - <argument index="1" name="peer_id" type="int"> - </argument> - <argument index="2" name="unreliable_lifetime" type="int" default="1"> - </argument> + <return type="int" enum="Error" /> + <argument index="0" name="peer" type="WebRTCPeerConnection" /> + <argument index="1" name="peer_id" type="int" /> + <argument index="2" name="unreliable_lifetime" type="int" default="1" /> <description> Add a new peer to the mesh with the given [code]peer_id[/code]. The [WebRTCPeerConnection] must be in state [constant WebRTCPeerConnection.STATE_NEW]. Three channels will be created for reliable, unreliable, and ordered transport. The value of [code]unreliable_lifetime[/code] will be passed to the [code]maxPacketLifetime[/code] option when creating unreliable and ordered channels (see [method WebRTCPeerConnection.create_data_channel]). </description> </method> <method name="close"> - <return type="void"> - </return> + <return type="void" /> <description> Close all the add peer connections and channels, freeing all resources. </description> </method> <method name="get_peer"> - <return type="Dictionary"> - </return> - <argument index="0" name="peer_id" type="int"> - </argument> + <return type="Dictionary" /> + <argument index="0" name="peer_id" type="int" /> <description> Return a dictionary representation of the peer with given [code]peer_id[/code] with three keys. [code]connection[/code] containing the [WebRTCPeerConnection] to this peer, [code]channels[/code] an array of three [WebRTCDataChannel], and [code]connected[/code] a boolean representing if the peer connection is currently connected (all three channels are open). </description> </method> <method name="get_peers"> - <return type="Dictionary"> - </return> + <return type="Dictionary" /> <description> Returns a dictionary which keys are the peer ids and values the peer representation as in [method get_peer]. </description> </method> <method name="has_peer"> - <return type="bool"> - </return> - <argument index="0" name="peer_id" type="int"> - </argument> + <return type="bool" /> + <argument index="0" name="peer_id" type="int" /> <description> Returns [code]true[/code] if the given [code]peer_id[/code] is in the peers map (it might not be connected though). </description> </method> <method name="initialize"> - <return type="int" enum="Error"> - </return> - <argument index="0" name="peer_id" type="int"> - </argument> - <argument index="1" name="server_compatibility" type="bool" default="false"> - </argument> + <return type="int" enum="Error" /> + <argument index="0" name="peer_id" type="int" /> + <argument index="1" name="server_compatibility" type="bool" default="false" /> + <argument index="2" name="channels_config" type="Array" default="[]" /> <description> Initialize the multiplayer peer with the given [code]peer_id[/code] (must be between 1 and 2147483647). - If [code]server_compatibilty[/code] is [code]false[/code] (default), the multiplayer peer will be immediately in state [constant NetworkedMultiplayerPeer.CONNECTION_CONNECTED] and [signal NetworkedMultiplayerPeer.connection_succeeded] will not be emitted. - If [code]server_compatibilty[/code] is [code]true[/code] the peer will suppress all [signal NetworkedMultiplayerPeer.peer_connected] signals until a peer with id [constant NetworkedMultiplayerPeer.TARGET_PEER_SERVER] connects and then emit [signal NetworkedMultiplayerPeer.connection_succeeded]. After that the signal [signal NetworkedMultiplayerPeer.peer_connected] will be emitted for every already connected peer, and any new peer that might connect. If the server peer disconnects after that, signal [signal NetworkedMultiplayerPeer.server_disconnected] will be emitted and state will become [constant NetworkedMultiplayerPeer.CONNECTION_CONNECTED]. + If [code]server_compatibilty[/code] is [code]false[/code] (default), the multiplayer peer will be immediately in state [constant MultiplayerPeer.CONNECTION_CONNECTED] and [signal MultiplayerPeer.connection_succeeded] will not be emitted. + If [code]server_compatibilty[/code] is [code]true[/code] the peer will suppress all [signal MultiplayerPeer.peer_connected] signals until a peer with id [constant MultiplayerPeer.TARGET_PEER_SERVER] connects and then emit [signal MultiplayerPeer.connection_succeeded]. After that the signal [signal MultiplayerPeer.peer_connected] will be emitted for every already connected peer, and any new peer that might connect. If the server peer disconnects after that, signal [signal MultiplayerPeer.server_disconnected] will be emitted and state will become [constant MultiplayerPeer.CONNECTION_CONNECTED]. + You can optionally specify a [code]channels_config[/code] array of [enum TransferMode] which will be used to create extra channels (WebRTC only supports one transfer mode per channel). </description> </method> <method name="remove_peer"> - <return type="void"> - </return> - <argument index="0" name="peer_id" type="int"> - </argument> + <return type="void" /> + <argument index="0" name="peer_id" type="int" /> <description> - Remove the peer with given [code]peer_id[/code] from the mesh. If the peer was connected, and [signal NetworkedMultiplayerPeer.peer_connected] was emitted for it, then [signal NetworkedMultiplayerPeer.peer_disconnected] will be emitted. + Remove the peer with given [code]peer_id[/code] from the mesh. If the peer was connected, and [signal MultiplayerPeer.peer_connected] was emitted for it, then [signal MultiplayerPeer.peer_disconnected] will be emitted. </description> </method> </methods> <members> <member name="refuse_new_connections" type="bool" setter="set_refuse_new_connections" getter="is_refusing_new_connections" override="true" default="false" /> - <member name="transfer_mode" type="int" setter="set_transfer_mode" getter="get_transfer_mode" override="true" enum="NetworkedMultiplayerPeer.TransferMode" default="2" /> + <member name="transfer_mode" type="int" setter="set_transfer_mode" getter="get_transfer_mode" override="true" enum="TransferMode" default="2" /> </members> <constants> </constants> diff --git a/modules/webrtc/doc_classes/WebRTCPeerConnection.xml b/modules/webrtc/doc_classes/WebRTCPeerConnection.xml index e21dee8eff..f6f360503f 100644 --- a/modules/webrtc/doc_classes/WebRTCPeerConnection.xml +++ b/modules/webrtc/doc_classes/WebRTCPeerConnection.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="WebRTCPeerConnection" inherits="Reference" version="4.0"> +<class name="WebRTCPeerConnection" inherits="RefCounted" version="4.0"> <brief_description> Interface to a WebRTC peer connection. </brief_description> @@ -15,40 +15,32 @@ </tutorials> <methods> <method name="add_ice_candidate"> - <return type="int" enum="Error"> - </return> - <argument index="0" name="media" type="String"> - </argument> - <argument index="1" name="index" type="int"> - </argument> - <argument index="2" name="name" type="String"> - </argument> + <return type="int" enum="Error" /> + <argument index="0" name="media" type="String" /> + <argument index="1" name="index" type="int" /> + <argument index="2" name="name" type="String" /> <description> Add an ice candidate generated by a remote peer (and received over the signaling server). See [signal ice_candidate_created]. </description> </method> <method name="close"> - <return type="void"> - </return> + <return type="void" /> <description> Close the peer connection and all data channels associated with it. Note, you cannot reuse this object for a new connection unless you call [method initialize]. </description> </method> <method name="create_data_channel"> - <return type="WebRTCDataChannel"> - </return> - <argument index="0" name="label" type="String"> - </argument> + <return type="WebRTCDataChannel" /> + <argument index="0" name="label" type="String" /> <argument index="1" name="options" type="Dictionary" default="{ -}"> - </argument> +}" /> <description> Returns a new [WebRTCDataChannel] (or [code]null[/code] on failure) with given [code]label[/code] and optionally configured via the [code]options[/code] dictionary. This method can only be called when the connection is in state [constant STATE_NEW]. There are two ways to create a working data channel: either call [method create_data_channel] on only one of the peer and listen to [signal data_channel_received] on the other, or call [method create_data_channel] on both peers, with the same values, and the [code]negotiated[/code] option set to [code]true[/code]. Valid [code]options[/code] are: [codeblock] { - "negotiated": true, # When set to true (default off), means the channel is negotiated out of band. "id" must be set too. data_channel_received will not be called. + "negotiated": true, # When set to true (default off), means the channel is negotiated out of band. "id" must be set too. "data_channel_received" will not be called. "id": 1, # When "negotiated" is true this value must also be set to the same value on both peer. # Only one of maxRetransmits and maxPacketLifeTime can be specified, not both. They make the channel unreliable (but also better at real time). @@ -63,26 +55,22 @@ </description> </method> <method name="create_offer"> - <return type="int" enum="Error"> - </return> + <return type="int" enum="Error" /> <description> Creates a new SDP offer to start a WebRTC connection with a remote peer. At least one [WebRTCDataChannel] must have been created before calling this method. If this functions returns [constant OK], [signal session_description_created] will be called when the session is ready to be sent. </description> </method> <method name="get_connection_state" qualifiers="const"> - <return type="int" enum="WebRTCPeerConnection.ConnectionState"> - </return> + <return type="int" enum="WebRTCPeerConnection.ConnectionState" /> <description> Returns the connection state. See [enum ConnectionState]. </description> </method> <method name="initialize"> - <return type="int" enum="Error"> - </return> + <return type="int" enum="Error" /> <argument index="0" name="configuration" type="Dictionary" default="{ -}"> - </argument> +}" /> <description> Re-initialize this peer connection, closing any previously active connection, and going back to state [constant STATE_NEW]. A dictionary of [code]options[/code] can be passed to configure the peer connection. Valid [code]options[/code] are: @@ -103,31 +91,24 @@ </description> </method> <method name="poll"> - <return type="int" enum="Error"> - </return> + <return type="int" enum="Error" /> <description> Call this method frequently (e.g. in [method Node._process] or [method Node._physics_process]) to properly receive signals. </description> </method> <method name="set_local_description"> - <return type="int" enum="Error"> - </return> - <argument index="0" name="type" type="String"> - </argument> - <argument index="1" name="sdp" type="String"> - </argument> + <return type="int" enum="Error" /> + <argument index="0" name="type" type="String" /> + <argument index="1" name="sdp" type="String" /> <description> Sets the SDP description of the local peer. This should be called in response to [signal session_description_created]. After calling this function the peer will start emitting [signal ice_candidate_created] (unless an [enum Error] different from [constant OK] is returned). </description> </method> <method name="set_remote_description"> - <return type="int" enum="Error"> - </return> - <argument index="0" name="type" type="String"> - </argument> - <argument index="1" name="sdp" type="String"> - </argument> + <return type="int" enum="Error" /> + <argument index="0" name="type" type="String" /> + <argument index="1" name="sdp" type="String" /> <description> Sets the SDP description of the remote peer. This should be called with the values generated by a remote peer and received over the signaling server. If [code]type[/code] is [code]offer[/code] the peer will emit [signal session_description_created] with the appropriate answer. @@ -137,29 +118,23 @@ </methods> <signals> <signal name="data_channel_received"> - <argument index="0" name="channel" type="Object"> - </argument> + <argument index="0" name="channel" type="Object" /> <description> Emitted when a new in-band channel is received, i.e. when the channel was created with [code]negotiated: false[/code] (default). The object will be an instance of [WebRTCDataChannel]. You must keep a reference of it or it will be closed automatically. See [method create_data_channel]. </description> </signal> <signal name="ice_candidate_created"> - <argument index="0" name="media" type="String"> - </argument> - <argument index="1" name="index" type="int"> - </argument> - <argument index="2" name="name" type="String"> - </argument> + <argument index="0" name="media" type="String" /> + <argument index="1" name="index" type="int" /> + <argument index="2" name="name" type="String" /> <description> Emitted when a new ICE candidate has been created. The three parameters are meant to be passed to the remote peer over the signaling server. </description> </signal> <signal name="session_description_created"> - <argument index="0" name="type" type="String"> - </argument> - <argument index="1" name="sdp" type="String"> - </argument> + <argument index="0" name="type" type="String" /> + <argument index="1" name="sdp" type="String" /> <description> Emitted after a successful call to [method create_offer] or [method set_remote_description] (when it generates an answer). The parameters are meant to be passed to [method set_local_description] on this object, and sent to the remote peer over the signaling server. </description> |