1 files changed, 0 insertions, 174 deletions
diff --git a/drivers/speex/speex_bits.h b/drivers/speex/speex_bits.h
deleted file mode 100644
index a26fb4ce0c..0000000000
--- a/drivers/speex/speex_bits.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/* Copyright (C) 2002 Jean-Marc Valin */
-/**
-   @file speex_bits.h
-   @brief Handles bit packing/unpacking
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef BITS_H
-#define BITS_H
-/** @defgroup SpeexBits SpeexBits: Bit-stream manipulations
- *  This is the structure that holds the bit-stream when encoding or decoding
- * with Speex. It allows some manipulations as well.
- *  @{
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** Bit-packing data structure representing (part of) a bit-stream. */
-typedef struct SpeexBits {
-   char *chars;   /**< "raw" data */
-   int   nbBits;  /**< Total number of bits stored in the stream*/
-   int   charPtr; /**< Position of the byte "cursor" */
-   int   bitPtr;  /**< Position of the bit "cursor" within the current char */
-   int   owner;   /**< Does the struct "own" the "raw" buffer (member "chars") */
-   int   overflow;/**< Set to one if we try to read past the valid data */
-   int   buf_size;/**< Allocated size for buffer */
-   int   reserved1; /**< Reserved for future use */
-   void *reserved2; /**< Reserved for future use */
-} SpeexBits;
-
-/** Initializes and allocates resources for a SpeexBits struct */
-void speex_bits_init(SpeexBits *bits);
-
-/** Initializes SpeexBits struct using a pre-allocated buffer*/
-void speex_bits_init_buffer(SpeexBits *bits, void *buff, int buf_size);
-
-/** Sets the bits in a SpeexBits struct to use data from an existing buffer (for decoding without copying data) */
-void speex_bits_set_bit_buffer(SpeexBits *bits, void *buff, int buf_size);
-
-/** Frees all resources associated to a SpeexBits struct. Right now this does nothing since no resources are allocated, but this could change in the future.*/
-void speex_bits_destroy(SpeexBits *bits);
-
-/** Resets bits to initial value (just after initialization, erasing content)*/
-void speex_bits_reset(SpeexBits *bits);
-
-/** Rewind the bit-stream to the beginning (ready for read) without erasing the content */
-void speex_bits_rewind(SpeexBits *bits);
-
-/** Initializes the bit-stream from the data in an area of memory */
-void speex_bits_read_from(SpeexBits *bits, char *bytes, int len);
-
-/** Append bytes to the bit-stream
- * 
- * @param bits Bit-stream to operate on
- * @param bytes pointer to the bytes what will be appended
- * @param len Number of bytes of append
- */
-void speex_bits_read_whole_bytes(SpeexBits *bits, char *bytes, int len);
-
-/** Write the content of a bit-stream to an area of memory
- * 
- * @param bits Bit-stream to operate on
- * @param bytes Memory location where to write the bits
- * @param max_len Maximum number of bytes to write (i.e. size of the "bytes" buffer)
- * @return Number of bytes written to the "bytes" buffer
-*/
-int speex_bits_write(SpeexBits *bits, char *bytes, int max_len);
-
-/** Like speex_bits_write, but writes only the complete bytes in the stream. Also removes the written bytes from the stream */
-int speex_bits_write_whole_bytes(SpeexBits *bits, char *bytes, int max_len);
-
-/** Append bits to the bit-stream
- * @param bits Bit-stream to operate on
- * @param data Value to append as integer
- * @param nbBits number of bits to consider in "data"
- */
-void speex_bits_pack(SpeexBits *bits, int data, int nbBits);
-
-/** Interpret the next bits in the bit-stream as a signed integer
- *
- * @param bits Bit-stream to operate on
- * @param nbBits Number of bits to interpret
- * @return A signed integer represented by the bits read
- */
-int speex_bits_unpack_signed(SpeexBits *bits, int nbBits);
-
-/** Interpret the next bits in the bit-stream as an unsigned integer
- *
- * @param bits Bit-stream to operate on
- * @param nbBits Number of bits to interpret
- * @return An unsigned integer represented by the bits read
- */
-unsigned int speex_bits_unpack_unsigned(SpeexBits *bits, int nbBits);
-
-/** Returns the number of bytes in the bit-stream, including the last one even if it is not "full"
- *
- * @param bits Bit-stream to operate on
- * @return Number of bytes in the stream
- */
-int speex_bits_nbytes(SpeexBits *bits);
-
-/** Same as speex_bits_unpack_unsigned, but without modifying the cursor position 
- * 
- * @param bits Bit-stream to operate on
- * @param nbBits Number of bits to look for
- * @return Value of the bits peeked, interpreted as unsigned
- */
-unsigned int speex_bits_peek_unsigned(SpeexBits *bits, int nbBits);
-
-/** Get the value of the next bit in the stream, without modifying the
- * "cursor" position 
- * 
- * @param bits Bit-stream to operate on
- * @return Value of the bit peeked (one bit only)
- */
-int speex_bits_peek(SpeexBits *bits);
-
-/** Advances the position of the "bit cursor" in the stream 
- *
- * @param bits Bit-stream to operate on
- * @param n Number of bits to advance
- */
-void speex_bits_advance(SpeexBits *bits, int n);
-
-/** Returns the number of bits remaining to be read in a stream
- *
- * @param bits Bit-stream to operate on
- * @return Number of bits that can still be read from the stream
- */
-int speex_bits_remaining(SpeexBits *bits);
-
-/** Insert a terminator so that the data can be sent as a packet while auto-detecting 
- * the number of frames in each packet 
- *
- * @param bits Bit-stream to operate on
- */
-void speex_bits_insert_terminator(SpeexBits *bits);
-
-#ifdef __cplusplus
-}
-#endif
-
-/* @} */
-#endif