diff options
Diffstat (limited to 'drivers/opus/opusfile.h')
| -rw-r--r-- | drivers/opus/opusfile.h | 2102 |
1 files changed, 2102 insertions, 0 deletions
diff --git a/drivers/opus/opusfile.h b/drivers/opus/opusfile.h new file mode 100644 index 0000000000..91d06aa9ba --- /dev/null +++ b/drivers/opus/opusfile.h @@ -0,0 +1,2102 @@ +/******************************************************************** + * * + * THIS FILE IS PART OF THE libopusfile SOFTWARE CODEC SOURCE CODE. * + * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS * + * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE * + * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. * + * * + * THE libopusfile SOURCE CODE IS (C) COPYRIGHT 1994-2012 * + * by the Xiph.Org Foundation and contributors http://www.xiph.org/ * + * * + ******************************************************************** + + function: stdio-based convenience library for opening/seeking/decoding + last mod: $Id: vorbisfile.h 17182 2010-04-29 03:48:32Z xiphmont $ + + ********************************************************************/ +#if !defined(_opusfile_h) +# define _opusfile_h (1) + +/**\mainpage + \section Introduction + + This is the documentation for the <tt>libopusfile</tt> C API. + + The <tt>libopusfile</tt> package provides a convenient high-level API for + decoding and basic manipulation of all Ogg Opus audio streams. + <tt>libopusfile</tt> is implemented as a layer on top of Xiph.Org's + reference + <tt><a href="https://www.xiph.org/ogg/doc/libogg/reference.html">libogg</a></tt> + and + <tt><a href="https://mf4.xiph.org/jenkins/view/opus/job/opus/ws/doc/html/index.html">libopus</a></tt> + libraries. + + <tt>libopusfile</tt> provides several sets of built-in routines for + file/stream access, and may also use custom stream I/O routines provided by + the embedded environment. + There are built-in I/O routines provided for ANSI-compliant + <code>stdio</code> (<code>FILE *</code>), memory buffers, and URLs + (including <file:> URLs, plus optionally <http:> and <https:> URLs). + + \section Organization + + The main API is divided into several sections: + - \ref stream_open_close + - \ref stream_info + - \ref stream_decoding + - \ref stream_seeking + + Several additional sections are not tied to the main API. + - \ref stream_callbacks + - \ref header_info + - \ref error_codes + + \section Overview + + The <tt>libopusfile</tt> API always decodes files to 48 kHz. + The original sample rate is not preserved by the lossy compression, though + it is stored in the header to allow you to resample to it after decoding + (the <tt>libopusfile</tt> API does not currently provide a resampler, + but the + <a href="http://www.speex.org/docs/manual/speex-manual/node7.html#SECTION00760000000000000000">the + Speex resampler</a> is a good choice if you need one). + In general, if you are playing back the audio, you should leave it at + 48 kHz, provided your audio hardware supports it. + When decoding to a file, it may be worth resampling back to the original + sample rate, so as not to surprise users who might not expect the sample + rate to change after encoding to Opus and decoding. + + Opus files can contain anywhere from 1 to 255 channels of audio. + The channel mappings for up to 8 channels are the same as the + <a href="http://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-800004.3.9">Vorbis + mappings</a>. + A special stereo API can convert everything to 2 channels, making it simple + to support multichannel files in an application which only has stereo + output. + Although the <tt>libopusfile</tt> ABI provides support for the theoretical + maximum number of channels, the current implementation does not support + files with more than 8 channels, as they do not have well-defined channel + mappings. + + Like all Ogg files, Opus files may be "chained". + That is, multiple Opus files may be combined into a single, longer file just + by concatenating the original files. + This is commonly done in internet radio streaming, as it allows the title + and artist to be updated each time the song changes, since each link in the + chain includes its own set of metadata. + + <tt>libopusfile</tt> fully supports chained files. + It will decode the first Opus stream found in each link of a chained file + (ignoring any other streams that might be concurrently multiplexed with it, + such as a video stream). + + The channel count can also change between links. + If your application is not prepared to deal with this, it can use the stereo + API to ensure the audio from all links will always get decoded into a + common format. + Since <tt>libopusfile</tt> always decodes to 48 kHz, you do not have to + worry about the sample rate changing between links (as was possible with + Vorbis). + This makes application support for chained files with <tt>libopusfile</tt> + very easy.*/ + +# if defined(__cplusplus) +extern "C" { +# endif + +# include <stdarg.h> +# include <stdio.h> +# include <ogg/ogg.h> +# include <opus/opus_multistream.h> + +/**@cond PRIVATE*/ + +/*Enable special features for gcc and gcc-compatible compilers.*/ +# if !defined(OP_GNUC_PREREQ) +# if defined(__GNUC__)&&defined(__GNUC_MINOR__) +# define OP_GNUC_PREREQ(_maj,_min) \ + ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min)) +# else +# define OP_GNUC_PREREQ(_maj,_min) 0 +# endif +# endif + +# if OP_GNUC_PREREQ(4,0) +# pragma GCC visibility push(default) +# endif + +typedef struct OpusHead OpusHead; +typedef struct OpusTags OpusTags; +typedef struct OpusPictureTag OpusPictureTag; +typedef struct OpusServerInfo OpusServerInfo; +typedef struct OpusFileCallbacks OpusFileCallbacks; +typedef struct OggOpusFile OggOpusFile; + +/*Warning attributes for libopusfile functions.*/ +# if OP_GNUC_PREREQ(3,4) +# define OP_WARN_UNUSED_RESULT __attribute__((__warn_unused_result__)) +# else +# define OP_WARN_UNUSED_RESULT +# endif +# if OP_GNUC_PREREQ(3,4) +# define OP_ARG_NONNULL(_x) __attribute__((__nonnull__(_x))) +# else +# define OP_ARG_NONNULL(_x) +# endif + +/**@endcond*/ + +/**\defgroup error_codes Error Codes*/ +/*@{*/ +/**\name List of possible error codes + Many of the functions in this library return a negative error code when a + function fails. + This list provides a brief explanation of the common errors. + See each individual function for more details on what a specific error code + means in that context.*/ +/*@{*/ + +/**A request did not succeed.*/ +#define OP_FALSE (-1) +/*Currently not used externally.*/ +#define OP_EOF (-2) +/**There was a hole in the page sequence numbers (e.g., a page was corrupt or + missing).*/ +#define OP_HOLE (-3) +/**An underlying read, seek, or tell operation failed when it should have + succeeded.*/ +#define OP_EREAD (-128) +/**A <code>NULL</code> pointer was passed where one was unexpected, or an + internal memory allocation failed, or an internal library error was + encountered.*/ +#define OP_EFAULT (-129) +/**The stream used a feature that is not implemented, such as an unsupported + channel family.*/ +#define OP_EIMPL (-130) +/**One or more parameters to a function were invalid.*/ +#define OP_EINVAL (-131) +/**A purported Ogg Opus stream did not begin with an Ogg page, a purported + header packet did not start with one of the required strings, "OpusHead" or + "OpusTags", or a link in a chained file was encountered that did not + contain any logical Opus streams.*/ +#define OP_ENOTFORMAT (-132) +/**A required header packet was not properly formatted, contained illegal + values, or was missing altogether.*/ +#define OP_EBADHEADER (-133) +/**The ID header contained an unrecognized version number.*/ +#define OP_EVERSION (-134) +/*Currently not used at all.*/ +#define OP_ENOTAUDIO (-135) +/**An audio packet failed to decode properly. + This is usually caused by a multistream Ogg packet where the durations of + the individual Opus packets contained in it are not all the same.*/ +#define OP_EBADPACKET (-136) +/**We failed to find data we had seen before, or the bitstream structure was + sufficiently malformed that seeking to the target destination was + impossible.*/ +#define OP_EBADLINK (-137) +/**An operation that requires seeking was requested on an unseekable stream.*/ +#define OP_ENOSEEK (-138) +/**The first or last granule position of a link failed basic validity checks.*/ +#define OP_EBADTIMESTAMP (-139) + +/*@}*/ +/*@}*/ + +/**\defgroup header_info Header Information*/ +/*@{*/ + +/**The maximum number of channels in an Ogg Opus stream.*/ +#define OPUS_CHANNEL_COUNT_MAX (255) + +/**Ogg Opus bitstream information. + This contains the basic playback parameters for a stream, and corresponds to + the initial ID header packet of an Ogg Opus stream.*/ +struct OpusHead{ + /**The Ogg Opus format version, in the range 0...255. + The top 4 bits represent a "major" version, and the bottom four bits + represent backwards-compatible "minor" revisions. + The current specification describes version 1. + This library will recognize versions up through 15 as backwards compatible + with the current specification. + An earlier draft of the specification described a version 0, but the only + difference between version 1 and version 0 is that version 0 did + not specify the semantics for handling the version field.*/ + int version; + /**The number of channels, in the range 1...255.*/ + int channel_count; + /**The number of samples that should be discarded from the beginning of the + stream.*/ + unsigned pre_skip; + /**The sampling rate of the original input. + All Opus audio is coded at 48 kHz, and should also be decoded at 48 kHz + for playback (unless the target hardware does not support this sampling + rate). + However, this field may be used to resample the audio back to the original + sampling rate, for example, when saving the output to a file.*/ + opus_uint32 input_sample_rate; + /**The gain to apply to the decoded output, in dB, as a Q8 value in the range + -32768...32767. + The <tt>libopusfile</tt> API will automatically apply this gain to the + decoded output before returning it, scaling it by + <code>pow(10,output_gain/(20.0*256))</code>.*/ + int output_gain; + /**The channel mapping family, in the range 0...255. + Channel mapping family 0 covers mono or stereo in a single stream. + Channel mapping family 1 covers 1 to 8 channels in one or more streams, + using the Vorbis speaker assignments. + Channel mapping family 255 covers 1 to 255 channels in one or more + streams, but without any defined speaker assignment.*/ + int mapping_family; + /**The number of Opus streams in each Ogg packet, in the range 1...255.*/ + int stream_count; + /**The number of coupled Opus streams in each Ogg packet, in the range + 0...127. + This must satisfy <code>0 <= coupled_count <= stream_count</code> and + <code>coupled_count + stream_count <= 255</code>. + The coupled streams appear first, before all uncoupled streams, in an Ogg + Opus packet.*/ + int coupled_count; + /**The mapping from coded stream channels to output channels. + Let <code>index=mapping[k]</code> be the value for channel <code>k</code>. + If <code>index<2*coupled_count</code>, then it refers to the left channel + from stream <code>(index/2)</code> if even, and the right channel from + stream <code>(index/2)</code> if odd. + Otherwise, it refers to the output of the uncoupled stream + <code>(index-coupled_count)</code>.*/ + unsigned char mapping[OPUS_CHANNEL_COUNT_MAX]; +}; + +/**The metadata from an Ogg Opus stream. + + This structure holds the in-stream metadata corresponding to the 'comment' + header packet of an Ogg Opus stream. + The comment header is meant to be used much like someone jotting a quick + note on the label of a CD. + It should be a short, to the point text note that can be more than a couple + words, but not more than a short paragraph. + + The metadata is stored as a series of (tag, value) pairs, in length-encoded + string vectors, using the same format as Vorbis (without the final "framing + bit"), Theora, and Speex, except for the packet header. + The first occurrence of the '=' character delimits the tag and value. + A particular tag may occur more than once, and order is significant. + The character set encoding for the strings is always UTF-8, but the tag + names are limited to ASCII, and treated as case-insensitive. + See <a href="http://www.xiph.org/vorbis/doc/v-comment.html">the Vorbis + comment header specification</a> for details. + + In filling in this structure, <tt>libopusfile</tt> will null-terminate the + #user_comments strings for safety. + However, the bitstream format itself treats them as 8-bit clean vectors, + possibly containing NUL characters, so the #comment_lengths array should be + treated as their authoritative length. + + This structure is binary and source-compatible with a + <code>vorbis_comment</code>, and pointers to it may be freely cast to + <code>vorbis_comment</code> pointers, and vice versa. + It is provided as a separate type to avoid introducing a compile-time + dependency on the libvorbis headers.*/ +struct OpusTags{ + /**The array of comment string vectors.*/ + char **user_comments; + /**An array of the corresponding length of each vector, in bytes.*/ + int *comment_lengths; + /**The total number of comment streams.*/ + int comments; + /**The null-terminated vendor string. + This identifies the software used to encode the stream.*/ + char *vendor; +}; + +/**\name Picture tag image formats*/ +/*@{*/ + +/**The MIME type was not recognized, or the image data did not match the + declared MIME type.*/ +#define OP_PIC_FORMAT_UNKNOWN (-1) +/**The MIME type indicates the image data is really a URL.*/ +#define OP_PIC_FORMAT_URL (0) +/**The image is a JPEG.*/ +#define OP_PIC_FORMAT_JPEG (1) +/**The image is a PNG.*/ +#define OP_PIC_FORMAT_PNG (2) +/**The image is a GIF.*/ +#define OP_PIC_FORMAT_GIF (3) + +/*@}*/ + +/**The contents of a METADATA_BLOCK_PICTURE tag.*/ +struct OpusPictureTag{ + /**The picture type according to the ID3v2 APIC frame: + <ol start="0"> + <li>Other</li> + <li>32x32 pixels 'file icon' (PNG only)</li> + <li>Other file icon</li> + <li>Cover (front)</li> + <li>Cover (back)</li> + <li>Leaflet page</li> + <li>Media (e.g. label side of CD)</li> + <li>Lead artist/lead performer/soloist</li> + <li>Artist/performer</li> + <li>Conductor</li> + <li>Band/Orchestra</li> + <li>Composer</li> + <li>Lyricist/text writer</li> + <li>Recording Location</li> + <li>During recording</li> + <li>During performance</li> + <li>Movie/video screen capture</li> + <li>A bright colored fish</li> + <li>Illustration</li> + <li>Band/artist logotype</li> + <li>Publisher/Studio logotype</li> + </ol> + Others are reserved and should not be used. + There may only be one each of picture type 1 and 2 in a file.*/ + opus_int32 type; + /**The MIME type of the picture, in printable ASCII characters 0x20-0x7E. + The MIME type may also be <code>"-->"</code> to signify that the data part + is a URL pointing to the picture instead of the picture data itself. + In this case, a terminating NUL is appended to the URL string in #data, + but #data_length is set to the length of the string excluding that + terminating NUL.*/ + char *mime_type; + /**The description of the picture, in UTF-8.*/ + char *description; + /**The width of the picture in pixels.*/ + opus_uint32 width; + /**The height of the picture in pixels.*/ + opus_uint32 height; + /**The color depth of the picture in bits-per-pixel (<em>not</em> + bits-per-channel).*/ + opus_uint32 depth; + /**For indexed-color pictures (e.g., GIF), the number of colors used, or 0 + for non-indexed pictures.*/ + opus_uint32 colors; + /**The length of the picture data in bytes.*/ + opus_uint32 data_length; + /**The binary picture data.*/ + unsigned char *data; + /**The format of the picture data, if known. + One of + <ul> + <li>#OP_PIC_FORMAT_UNKNOWN,</li> + <li>#OP_PIC_FORMAT_URL,</li> + <li>#OP_PIC_FORMAT_JPEG,</li> + <li>#OP_PIC_FORMAT_PNG, or</li> + <li>#OP_PIC_FORMAT_GIF.</li> + </ul>*/ + int format; +}; + +/**\name Functions for manipulating header data + + These functions manipulate the #OpusHead and #OpusTags structures, + which describe the audio parameters and tag-value metadata, respectively. + These can be used to query the headers returned by <tt>libopusfile</tt>, or + to parse Opus headers from sources other than an Ogg Opus stream, provided + they use the same format.*/ +/*@{*/ + +/**Parses the contents of the ID header packet of an Ogg Opus stream. + \param[out] _head Returns the contents of the parsed packet. + The contents of this structure are untouched on error. + This may be <code>NULL</code> to merely test the header + for validity. + \param[in] _data The contents of the ID header packet. + \param _len The number of bytes of data in the ID header packet. + \return 0 on success or a negative value on error. + \retval #OP_ENOTFORMAT If the data does not start with the "OpusHead" + string. + \retval #OP_EVERSION If the version field signaled a version this library + does not know how to parse. + \retval #OP_EIMPL If the channel mapping family was 255, which general + purpose players should not attempt to play. + \retval #OP_EBADHEADER If the contents of the packet otherwise violate the + Ogg Opus specification: + <ul> + <li>Insufficient data,</li> + <li>Too much data for the known minor versions,</li> + <li>An unrecognized channel mapping family,</li> + <li>Zero channels or too many channels,</li> + <li>Zero coded streams,</li> + <li>Too many coupled streams, or</li> + <li>An invalid channel mapping index.</li> + </ul>*/ +OP_WARN_UNUSED_RESULT int opus_head_parse(OpusHead *_head, + const unsigned char *_data,size_t _len) OP_ARG_NONNULL(2); + +/**Converts a granule position to a sample offset for a given Ogg Opus stream. + The sample offset is simply <code>_gp-_head->pre_skip</code>. + Granule position values smaller than OpusHead#pre_skip correspond to audio + that should never be played, and thus have no associated sample offset. + This function returns -1 for such values. + This function also correctly handles extremely large granule positions, + which may have wrapped around to a negative number when stored in a signed + ogg_int64_t value. + \param _head The #OpusHead information from the ID header of the stream. + \param _gp The granule position to convert. + \return The sample offset associated with the given granule position + (counting at a 48 kHz sampling rate), or the special value -1 on + error (i.e., the granule position was smaller than the pre-skip + amount).*/ +ogg_int64_t opus_granule_sample(const OpusHead *_head,ogg_int64_t _gp) + OP_ARG_NONNULL(1); + +/**Parses the contents of the 'comment' header packet of an Ogg Opus stream. + \param[out] _tags An uninitialized #OpusTags structure. + This returns the contents of the parsed packet. + The contents of this structure are untouched on error. + This may be <code>NULL</code> to merely test the header + for validity. + \param[in] _data The contents of the 'comment' header packet. + \param _len The number of bytes of data in the 'info' header packet. + \retval 0 Success. + \retval #OP_ENOTFORMAT If the data does not start with the "OpusTags" + string. + \retval #OP_EBADHEADER If the contents of the packet otherwise violate the + Ogg Opus specification. + \retval #OP_EFAULT If there wasn't enough memory to store the tags.*/ +OP_WARN_UNUSED_RESULT int opus_tags_parse(OpusTags *_tags, + const unsigned char *_data,size_t _len) OP_ARG_NONNULL(2); + +/**Performs a deep copy of an #OpusTags structure. + \param _dst The #OpusTags structure to copy into. + If this function fails, the contents of this structure remain + untouched. + \param _src The #OpusTags structure to copy from. + \retval 0 Success. + \retval #OP_EFAULT If there wasn't enough memory to copy the tags.*/ +int opus_tags_copy(OpusTags *_dst,const OpusTags *_src) OP_ARG_NONNULL(1); + +/**Initializes an #OpusTags structure. + This should be called on a freshly allocated #OpusTags structure before + attempting to use it. + \param _tags The #OpusTags structure to initialize.*/ +void opus_tags_init(OpusTags *_tags) OP_ARG_NONNULL(1); + +/**Add a (tag, value) pair to an initialized #OpusTags structure. + \note Neither opus_tags_add() nor opus_tags_add_comment() support values + containing embedded NULs, although the bitstream format does support them. + To add such tags, you will need to manipulate the #OpusTags structure + directly. + \param _tags The #OpusTags structure to add the (tag, value) pair to. + \param _tag A NUL-terminated, case-insensitive, ASCII string containing + the tag to add (without an '=' character). + \param _value A NUL-terminated UTF-8 containing the corresponding value. + \return 0 on success, or a negative value on failure. + \retval #OP_EFAULT An internal memory allocation failed.*/ +int opus_tags_add(OpusTags *_tags,const char *_tag,const char *_value) + OP_ARG_NONNULL(1) OP_ARG_NONNULL(2) OP_ARG_NONNULL(3); + +/**Add a comment to an initialized #OpusTags structure. + \note Neither opus_tags_add_comment() nor opus_tags_add() support comments + containing embedded NULs, although the bitstream format does support them. + To add such tags, you will need to manipulate the #OpusTags structure + directly. + \param _tags The #OpusTags structure to add the comment to. + \param _comment A NUL-terminated UTF-8 string containing the comment in + "TAG=value" form. + \return 0 on success, or a negative value on failure. + \retval #OP_EFAULT An internal memory allocation failed.*/ +int opus_tags_add_comment(OpusTags *_tags,const char *_comment) + OP_ARG_NONNULL(1) OP_ARG_NONNULL(2); + +/**Look up a comment value by its tag. + \param _tags An initialized #OpusTags structure. + \param _tag The tag to look up. + \param _count The instance of the tag. + The same tag can appear multiple times, each with a distinct + value, so an index is required to retrieve them all. + The order in which these values appear is significant and + should be preserved. + Use opus_tags_query_count() to get the legal range for the + \a _count parameter. + \return A pointer to the queried tag's value. + This points directly to data in the #OpusTags structure. + It should not be modified or freed by the application, and + modifications to the structure may invalidate the pointer. + \retval NULL If no matching tag is found.*/ +const char *opus_tags_query(const OpusTags *_tags,const char *_tag,int _count) + OP_ARG_NONNULL(1) OP_ARG_NONNULL(2); + +/**Look up the number of instances of a tag. + Call this first when querying for a specific tag and then iterate over the + number of instances with separate calls to opus_tags_query() to retrieve + all the values for that tag in order. + \param _tags An initialized #OpusTags structure. + \param _tag The tag to look up. + \return The number of instances of this particular tag.*/ +int opus_tags_query_count(const OpusTags *_tags,const char *_tag) + OP_ARG_NONNULL(1) OP_ARG_NONNULL(2); + +/**Get the track gain from an R128_TRACK_GAIN tag, if one was specified. + This searches for the first R128_TRACK_GAIN tag with a valid signed, + 16-bit decimal integer value and returns the value. + This routine is exposed merely for convenience for applications which wish + to do something special with the track gain (i.e., display it). + If you simply wish to apply the track gain instead of the header gain, you + can use op_set_gain_offset() with an #OP_TRACK_GAIN type and no offset. + \param _tags An initialized #OpusTags structure. + \param[out] _gain_q8 The track gain, in 1/256ths of a dB. + This will lie in the range [-32768,32767], and should + be applied in <em>addition</em> to the header gain. + On error, no value is returned, and the previous + contents remain unchanged. + \return 0 on success, or a negative value on error. + \retval #OP_FALSE There was no track gain available in the given tags.*/ +int opus_tags_get_track_gain(const OpusTags *_tags,int *_gain_q8) + OP_ARG_NONNULL(1) OP_ARG_NONNULL(2); + +/**Clears the #OpusTags structure. + This should be called on an #OpusTags structure after it is no longer + needed. + It will free all memory used by the structure members. + \param _tags The #OpusTags structure to clear.*/ +void opus_tags_clear(OpusTags *_tags) OP_ARG_NONNULL(1); + +/**Check if \a _comment is an instance of a \a _tag_name tag. + \see opus_tagncompare + \param _tag_name A NUL-terminated, case-insensitive, ASCII string containing + the name of the tag to check for (without the terminating + '=' character). + \param _comment The comment string to check. + \return An integer less than, equal to, or greater than zero if \a _comment + is found respectively, to be less than, to match, or be greater + than a "tag=value" string whose tag matches \a _tag_name.*/ +int opus_tagcompare(const char *_tag_name,const char *_comment); + +/**Check if \a _comment is an instance of a \a _tag_name tag. + This version is slightly more efficient than opus_tagcompare() if the length + of the tag name is already known (e.g., because it is a constant). + \see opus_tagcompare + \param _tag_name A case-insensitive ASCII string containing the name of the + tag to check for (without the terminating '=' character). + \param _tag_len The number of characters in the tag name. + This must be non-negative. + \param _comment The comment string to check. + \return An integer less than, equal to, or greater than zero if \a _comment + is found respectively, to be less than, to match, or be greater + than a "tag=value" string whose tag matches the first \a _tag_len + characters of \a _tag_name.*/ +int opus_tagncompare(const char *_tag_name,int _tag_len,const char *_comment); + +/**Parse a single METADATA_BLOCK_PICTURE tag. + This decodes the BASE64-encoded content of the tag and returns a structure + with the MIME type, description, image parameters (if known), and the + compressed image data. + If the MIME type indicates the presence of an image format we recognize + (JPEG, PNG, or GIF) and the actual image data contains the magic signature + associated with that format, then the OpusPictureTag::format field will be + set to the corresponding format. + This is provided as a convenience to avoid requiring applications to parse + the MIME type and/or do their own format detection for the commonly used + formats. + In this case, we also attempt to extract the image parameters directly from + the image data (overriding any that were present in the tag, which the + specification says applications are not meant to rely on). + The application must still provide its own support for actually decoding the + image data and, if applicable, retrieving that data from URLs. + \param[out] _pic Returns the parsed picture data. + No sanitation is done on the type, MIME type, or + description fields, so these might return invalid values. + The contents of this structure are left unmodified on + failure. + \param _tag The METADATA_BLOCK_PICTURE tag contents. + The leading "METADATA_BLOCK_PICTURE=" portion is optional, + to allow the function to be used on either directly on the + values in OpusTags::user_comments or on the return value + of opus_tags_query(). + \return 0 on success or a negative value on error. + \retval #OP_ENOTFORMAT The METADATA_BLOCK_PICTURE contents were not valid. + \retval #OP_EFAULT There was not enough memory to store the picture tag + contents.*/ +OP_WARN_UNUSED_RESULT int opus_picture_tag_parse(OpusPictureTag *_pic, + const char *_tag) OP_ARG_NONNULL(1) OP_ARG_NONNULL(2); + +/**Initializes an #OpusPictureTag structure. + This should be called on a freshly allocated #OpusPictureTag structure + before attempting to use it. + \param _pic The #OpusPictureTag structure to initialize.*/ +void opus_picture_tag_init(OpusPictureTag *_pic) OP_ARG_NONNULL(1); + +/**Clears the #OpusPictureTag structure. + This should be called on an #OpusPictureTag structure after it is no longer + needed. + It will free all memory used by the structure members. + \param _pic The #OpusPictureTag structure to clear.*/ +void opus_picture_tag_clear(OpusPictureTag *_pic) OP_ARG_NONNULL(1); + +/*@}*/ + +/*@}*/ + +/**\defgroup url_options URL Reading Options*/ +/*@{*/ +/**\name URL reading options + Options for op_url_stream_create() and associated functions. + These allow you to provide proxy configuration parameters, skip SSL + certificate checks, etc. + Options are processed in order, and if the same option is passed multiple + times, only the value specified by the last occurrence has an effect + (unless otherwise specified). + They may be expanded in the future.*/ +/*@{*/ + +/**@cond PRIVATE*/ + +/*These are the raw numbers used to define the request codes. + They should not be used directly.*/ +#define OP_SSL_SKIP_CERTIFICATE_CHECK_REQUEST (6464) +#define OP_HTTP_PROXY_HOST_REQUEST (6528) +#define OP_HTTP_PROXY_PORT_REQUEST (6592) +#define OP_HTTP_PROXY_USER_REQUEST (6656) +#define OP_HTTP_PROXY_PASS_REQUEST (6720) +#define OP_GET_SERVER_INFO_REQUEST (6784) + +#define OP_URL_OPT(_request) ((_request)+(char *)0) + +/*These macros trigger compilation errors or warnings if the wrong types are + provided to one of the URL options.*/ +#define OP_CHECK_INT(_x) ((void)((_x)==(opus_int32)0),(opus_int32)(_x)) +#define OP_CHECK_CONST_CHAR_PTR(_x) ((_x)+((_x)-(const char *)(_x))) +#define OP_CHECK_SERVER_INFO_PTR(_x) ((_x)+((_x)-(OpusServerInfo *)(_x))) + +/**@endcond*/ + +/**HTTP/Shoutcast/Icecast server information associated with a URL.*/ +struct OpusServerInfo{ + /**The name of the server (icy-name/ice-name). + This is <code>NULL</code> if there was no <code>icy-name</code> or + <code>ice-name</code> header.*/ + char *name; + /**A short description of the server (icy-description/ice-description). + This is <code>NULL</code> if there was no <code>icy-description</code> or + <code>ice-description</code> header.*/ + char *description; + /**The genre the server falls under (icy-genre/ice-genre). + This is <code>NULL</code> if there was no <code>icy-genre</code> or + <code>ice-genre</code> header.*/ + char *genre; + /**The homepage for the server (icy-url/ice-url). + This is <code>NULL</code> if there was no <code>icy-url</code> or + <code>ice-url</code> header.*/ + char *url; + /**The software used by the origin server (Server). + This is <code>NULL</code> if there was no <code>Server</code> header.*/ + char *server; + /**The media type of the entity sent to the recepient (Content-Type). + This is <code>NULL</code> if there was no <code>Content-Type</code> + header.*/ + char *content_type; + /**The nominal stream bitrate in kbps (icy-br/ice-bitrate). + This is <code>-1</code> if there was no <code>icy-br</code> or + <code>ice-bitrate</code> header.*/ + opus_int32 bitrate_kbps; + /**Flag indicating whether the server is public (<code>1</code>) or not + (<code>0</code>) (icy-pub/ice-public). + This is <code>-1</code> if there was no <code>icy-pub</code> or + <code>ice-public</code> header.*/ + int is_public; + /**Flag indicating whether the server is using HTTPS instead of HTTP. + This is <code>0</code> unless HTTPS is being used. + This may not match the protocol used in the original URL if there were + redirections.*/ + int is_ssl; +}; + +/**Initializes an #OpusServerInfo structure. + All fields are set as if the corresponding header was not available. + \param _info The #OpusServerInfo structure to initialize. + \note If you use this function, you must link against <tt>libopusurl</tt>.*/ +void opus_server_info_init(OpusServerInfo *_info) OP_ARG_NONNULL(1); + +/**Clears the #OpusServerInfo structure. + This should be called on an #OpusServerInfo structure after it is no longer + needed. + It will free all memory used by the structure members. + \param _info The #OpusServerInfo structure to clear. + \note If you use this function, you must link against <tt>libopusurl</tt>.*/ +void opus_server_info_clear(OpusServerInfo *_info) OP_ARG_NONNULL(1); + +/**Skip the certificate check when connecting via TLS/SSL (https). + \param _b <code>opus_int32</code>: Whether or not to skip the certificate + check. + The check will be skipped if \a _b is non-zero, and will not be + skipped if \a _b is zero. + \hideinitializer*/ +#define OP_SSL_SKIP_CERTIFICATE_CHECK(_b) \ + OP_URL_OPT(OP_SSL_SKIP_CERTIFICATE_CHECK_REQUEST),OP_CHECK_INT(_b) + +/**Proxy connections through the given host. + If no port is specified via #OP_HTTP_PROXY_PORT, the port number defaults + to 8080 (http-alt). + All proxy parameters are ignored for non-http and non-https URLs. + \param _host <code>const char *</code>: The proxy server hostname. + This may be <code>NULL</code> to disable the use of a proxy + server. + \hideinitializer*/ +#define OP_HTTP_PROXY_HOST(_host) \ + OP_URL_OPT(OP_HTTP_PROXY_HOST_REQUEST),OP_CHECK_CONST_CHAR_PTR(_host) + +/**Use the given port when proxying connections. + This option only has an effect if #OP_HTTP_PROXY_HOST is specified with a + non-<code>NULL</code> \a _host. + If this option is not provided, the proxy port number defaults to 8080 + (http-alt). + All proxy parameters are ignored for non-http and non-https URLs. + \param _port <code>opus_int32</code>: The proxy server port. + This must be in the range 0...65535 (inclusive), or the + URL function this is passed to will fail. + \hideinitializer*/ +#define OP_HTTP_PROXY_PORT(_port) \ + OP_URL_OPT(OP_HTTP_PROXY_PORT_REQUEST),OP_CHECK_INT(_port) + +/**Use the given user name for authentication when proxying connections. + All proxy parameters are ignored for non-http and non-https URLs. + \param _user const char *: The proxy server user name. + This may be <code>NULL</code> to disable proxy + authentication. + A non-<code>NULL</code> value only has an effect + if #OP_HTTP_PROXY_HOST and #OP_HTTP_PROXY_PASS + are also specified with non-<code>NULL</code> + arguments. + \hideinitializer*/ +#define OP_HTTP_PROXY_USER(_user) \ + OP_URL_OPT(OP_HTTP_PROXY_USER_REQUEST),OP_CHECK_CONST_CHAR_PTR(_user) + +/**Use the given password for authentication when proxying connections. + All proxy parameters are ignored for non-http and non-https URLs. + \param _pass const char *: The proxy server password. + This may be <code>NULL</code> to disable proxy + authentication. + A non-<code>NULL</code> value only has an effect + if #OP_HTTP_PROXY_HOST and #OP_HTTP_PROXY_USER + are also specified with non-<code>NULL</code> + arguments. + \hideinitializer*/ +#define OP_HTTP_PROXY_PASS(_pass) \ + OP_URL_OPT(OP_HTTP_PROXY_PASS_REQUEST),OP_CHECK_CONST_CHAR_PTR(_pass) + +/**Parse information about the streaming server (if any) and return it. + Very little validation is done. + In particular, OpusServerInfo::url may not be a valid URL, + OpusServerInfo::bitrate_kbps may not really be in kbps, and + OpusServerInfo::content_type may not be a valid MIME type. + The character set of the string fields is not specified anywhere, and should + not be assumed to be valid UTF-8. + \param _info OpusServerInfo *: Returns information about the server. + If there is any error opening the stream, the + contents of this structure remain + unmodified. + On success, fills in the structure with the + server information that was available, if + any. + After a successful return, the contents of + this structure should be freed by calling + opus_server_info_clear(). + \hideinitializer*/ +#define OP_GET_SERVER_INFO(_info) \ + OP_URL_OPT(OP_GET_SERVER_INFO_REQUEST),OP_CHECK_SERVER_INFO_PTR(_info) + +/*@}*/ +/*@}*/ + +/**\defgroup stream_callbacks Abstract Stream Reading Interface*/ +/*@{*/ +/**\name Functions for reading from streams + These functions define the interface used to read from and seek in a stream + of data. + A stream does not need to implement seeking, but the decoder will not be + able to seek if it does not do so. + These functions also include some convenience routines for working with + standard <code>FILE</code> pointers, complete streams stored in a single + block of memory, or URLs.*/ +/*@{*/ + +/**Reads up to \a _nbytes bytes of data from \a _stream. + \param _stream The stream to read from. + \param[out] _ptr The buffer to store the data in. + \param _nbytes The maximum number of bytes to read. + This function may return fewer, though it will not + return zero unless it reaches end-of-file. + \return The number of bytes successfully read, or a negative value on + error.*/ +typedef int (*op_read_func)(void *_stream,unsigned char *_ptr,int _nbytes); + +/**Sets the position indicator for \a _stream. + The new position, measured in bytes, is obtained by adding \a _offset + bytes to the position specified by \a _whence. + If \a _whence is set to <code>SEEK_SET</code>, <code>SEEK_CUR</code>, or + <code>SEEK_END</code>, the offset is relative to the start of the stream, + the current position indicator, or end-of-file, respectively. + \retval 0 Success. + \retval -1 Seeking is not supported or an error occurred. + <code>errno</code> need not be set.*/ +typedef int (*op_seek_func)(void *_stream,opus_int64 _offset,int _whence); + +/**Obtains the current value of the position indicator for \a _stream. + \return The current position indicator.*/ +typedef opus_int64 (*op_tell_func)(void *_stream); + +/**Closes the underlying stream. + \retval 0 Success. + \retval EOF An error occurred. + <code>errno</code> need not be set.*/ +typedef int (*op_close_func)(void *_stream); + +/**The callbacks used to access non-<code>FILE</code> stream resources. + The function prototypes are basically the same as for the stdio functions + <code>fread()</code>, <code>fseek()</code>, <code>ftell()</code>, and + <code>fclose()</code>. + The differences are that the <code>FILE *</code> arguments have been + replaced with a <code>void *</code>, which is to be used as a pointer to + whatever internal data these functions might need, that #seek and #tell + take and return 64-bit offsets, and that #seek <em>must</em> return -1 if + the stream is unseekable.*/ +struct OpusFileCallbacks{ + /**Used to read data from the stream. + This must not be <code>NULL</code>.*/ + op_read_func read; + /**Used to seek in the stream. + This may be <code>NULL</code> if seeking is not implemented.*/ + op_seek_func seek; + /**Used to return the current read position in the stream. + This may be <code>NULL</code> if seeking is not implemented.*/ + op_tell_func tell; + /**Used to close the stream when the decoder is freed. + This may be <code>NULL</code> to leave the stream open.*/ + op_close_func close; +}; + +/**Opens a stream with <code>fopen()</code> and fills in a set of callbacks + that can be used to access it. + This is useful to avoid writing your own portable 64-bit seeking wrappers, + and also avoids cross-module linking issues on Windows, where a + <code>FILE *</code> must be accessed by routines defined in the same module + that opened it. + \param[out] _cb The callbacks to use for this file. + If there is an error opening the file, nothing will be + filled in here. + \param _path The path to the file to open. + On Windows, this string must be UTF-8 (to allow access to + files whose names cannot be represented in the current + MBCS code page). + All other systems use the native character encoding. + \param _mode The mode to open the file in. + \return A stream handle to use with the callbacks, or <code>NULL</code> on + error.*/ +OP_WARN_UNUSED_RESULT void *op_fopen(OpusFileCallbacks *_cb, + const char *_path,const char *_mode) OP_ARG_NONNULL(1) OP_ARG_NONNULL(2) + OP_ARG_NONNULL(3); + +/**Opens a stream with <code>fdopen()</code> and fills in a set of callbacks + that can be used to access it. + This is useful to avoid writing your own portable 64-bit seeking wrappers, + and also avoids cross-module linking issues on Windows, where a + <code>FILE *</code> must be accessed by routines defined in the same module + that opened it. + \param[out] _cb The callbacks to use for this file. + If there is an error opening the file, nothing will be + filled in here. + \param _fd The file descriptor to open. + \param _mode The mode to open the file in. + \return A stream handle to use with the callbacks, or <code>NULL</code> on + error.*/ +OP_WARN_UNUSED_RESULT void *op_fdopen(OpusFileCallbacks *_cb, + int _fd,const char *_mode) OP_ARG_NONNULL(1) OP_ARG_NONNULL(3); + +/**Opens a stream with <code>freopen()</code> and fills in a set of callbacks + that can be used to access it. + This is useful to avoid writing your own portable 64-bit seeking wrappers, + and also avoids cross-module linking issues on Windows, where a + <code>FILE *</code> must be accessed by routines defined in the same module + that opened it. + \param[out] _cb The callbacks to use for this file. + If there is an error opening the file, nothing will be + filled in here. + \param _path The path to the file to open. + On Windows, this string must be UTF-8 (to allow access + to files whose names cannot be represented in the + current MBCS code page). + All other systems use the native character encoding. + \param _mode The mode to open the file in. + \param _stream A stream previously returned by op_fopen(), op_fdopen(), + or op_freopen(). + \return A stream handle to use with the callbacks, or <code>NULL</code> on + error.*/ +OP_WARN_UNUSED_RESULT void *op_freopen(OpusFileCallbacks *_cb, + const char *_path,const char *_mode,void *_stream) OP_ARG_NONNULL(1) + OP_ARG_NONNULL(2) OP_ARG_NONNULL(3) OP_ARG_NONNULL(4); + +/**Creates a stream that reads from the given block of memory. + This block of memory must contain the complete stream to decode. + This is useful for caching small streams (e.g., sound effects) in RAM. + \param[out] _cb The callbacks to use for this stream. + If there is an error creating the stream, nothing will be + filled in here. + \param _data The block of memory to read from. + \param _size The size of the block of memory. + \return A stream handle to use with the callbacks, or <code>NULL</code> on + error.*/ +OP_WARN_UNUSED_RESULT void *op_mem_stream_create(OpusFileCallbacks *_cb, + const unsigned char *_data,size_t _size) OP_ARG_NONNULL(1); + +/**Creates a stream that reads from the given URL. + This function behaves identically to op_url_stream_create(), except that it + takes a va_list instead of a variable number of arguments. + It does not call the <code>va_end</code> macro, and because it invokes the + <code>va_arg</code> macro, the value of \a _ap is undefined after the call. + \note If you use this function, you must link against <tt>libopusurl</tt>. + \param[out] _cb The callbacks to use for this stream. + If there is an error creating the stream, nothing will + be filled in here. + \param _url The URL to read from. + Currently only the <file:>, <http:>, and <https:> + schemes are supported. + Both <http:> and <https:> may be disabled at compile + time, in which case opening such URLs will always fail. + Currently this only supports URIs. + IRIs should be converted to UTF-8 and URL-escaped, with + internationalized domain names encoded in punycode, + before passing them to this function. + \param[in,out] _ap A list of the \ref url_options "optional flags" to use. + This is a variable-length list of options terminated + with <code>NULL</code>. + \return A stream handle to use with the callbacks, or <code>NULL</code> on + error.*/ +OP_WARN_UNUSED_RESULT void *op_url_stream_vcreate(OpusFileCallbacks *_cb, + const char *_url,va_list _ap) OP_ARG_NONNULL(1) OP_ARG_NONNULL(2); + +/**Creates a stream that reads from the given URL. + \note If you use this function, you must link against <tt>libopusurl</tt>. + \param[out] _cb The callbacks to use for this stream. + If there is an error creating the stream, nothing will be + filled in here. + \param _url The URL to read from. + Currently only the <file:>, <http:>, and <https:> schemes + are supported. + Both <http:> and <https:> may be disabled at compile time, + in which case opening such URLs will always fail. + Currently this only supports URIs. + IRIs should be converted to UTF-8 and URL-escaped, with + internationalized domain names encoded in punycode, before + passing them to this function. + \param ... The \ref url_options "optional flags" to use. + This is a variable-length list of options terminated with + <code>NULL</code>. + \return A stream handle to use with the callbacks, or <code>NULL</code> on + error.*/ +OP_WARN_UNUSED_RESULT void *op_url_stream_create(OpusFileCallbacks *_cb, + const char *_url,...) OP_ARG_NONNULL(1) OP_ARG_NONNULL(2); + +/*@}*/ +/*@}*/ + +/**\defgroup stream_open_close Opening and Closing*/ +/*@{*/ +/**\name Functions for opening and closing streams + + These functions allow you to test a stream to see if it is Opus, open it, + and close it. + Several flavors are provided for each of the built-in stream types, plus a + more general version which takes a set of application-provided callbacks.*/ +/*@{*/ + +/**Test to see if this is an Opus stream. + For good results, you will need at least 57 bytes (for a pure Opus-only + stream). + Something like 512 bytes will give more reliable results for multiplexed + streams. + This function is meant to be a quick-rejection filter. + Its purpose is not to guarantee that a stream is a valid Opus stream, but to + ensure that it looks enough like Opus that it isn't going to be recognized + as some other format (except possibly an Opus stream that is also + multiplexed with other codecs, such as video). + \param[out] _head The parsed ID header contents. + You may pass <code>NULL</code> if you do not need + this information. + If the function fails, the contents of this structure + remain untouched. + \param _initial_data An initial buffer of data from the start of the + stream. + \param _initial_bytes The number of bytes in \a _initial_data. + \return 0 if the data appears to be Opus, or a negative value on error. + \retval #OP_FALSE There was not enough data to tell if this was an Opus + stream or not. + \retval #OP_EFAULT An internal memory allocation failed. + \retval #OP_EIMPL The stream used a feature that is not implemented, + such as an unsupported channel family. + \retval #OP_ENOTFORMAT If the data did not contain a recognizable ID + header for an Opus stream. + \retval #OP_EVERSION If the version field signaled a version this library + does not know how to parse. + \retval #OP_EBADHEADER The ID header was not properly formatted or contained + illegal values.*/ +int op_test(OpusHead *_head, + const unsigned char *_initial_data,size_t _initial_bytes); + +/**Open a stream from the given file path. + \param _path The path to the file to open. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want the + failure code. + The failure code will be #OP_EFAULT if the file could not + be opened, or one of the other failure codes from + op_open_callbacks() otherwise. + \return A freshly opened \c OggOpusFile, or <code>NULL</code> on error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_open_file(const char *_path,int *_error) + OP_ARG_NONNULL(1); + +/**Open a stream from a memory buffer. + \param _data The memory buffer to open. + \param _size The number of bytes in the buffer. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want the + failure code. + See op_open_callbacks() for a full list of failure codes. + \return A freshly opened \c OggOpusFile, or <code>NULL</code> on error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_open_memory(const unsigned char *_data, + size_t _size,int *_error); + +/**Open a stream from a URL. + This function behaves identically to op_open_url(), except that it + takes a va_list instead of a variable number of arguments. + It does not call the <code>va_end</code> macro, and because it invokes the + <code>va_arg</code> macro, the value of \a _ap is undefined after the call. + \note If you use this function, you must link against <tt>libopusurl</tt>. + \param _url The URL to open. + Currently only the <file:>, <http:>, and <https:> + schemes are supported. + Both <http:> and <https:> may be disabled at compile + time, in which case opening such URLs will always + fail. + Currently this only supports URIs. + IRIs should be converted to UTF-8 and URL-escaped, + with internationalized domain names encoded in + punycode, before passing them to this function. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want + the failure code. + See op_open_callbacks() for a full list of failure + codes. + \param[in,out] _ap A list of the \ref url_options "optional flags" to + use. + This is a variable-length list of options terminated + with <code>NULL</code>. + \return A freshly opened \c OggOpusFile, or <code>NULL</code> on error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_vopen_url(const char *_url, + int *_error,va_list _ap) OP_ARG_NONNULL(1); + +/**Open a stream from a URL. + \note If you use this function, you must link against <tt>libopusurl</tt>. + \param _url The URL to open. + Currently only the <file:>, <http:>, and <https:> schemes + are supported. + Both <http:> and <https:> may be disabled at compile + time, in which case opening such URLs will always fail. + Currently this only supports URIs. + IRIs should be converted to UTF-8 and URL-escaped, with + internationalized domain names encoded in punycode, + before passing them to this function. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want the + failure code. + See op_open_callbacks() for a full list of failure codes. + \param ... The \ref url_options "optional flags" to use. + This is a variable-length list of options terminated with + <code>NULL</code>. + \return A freshly opened \c OggOpusFile, or <code>NULL</code> on error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_open_url(const char *_url, + int *_error,...) OP_ARG_NONNULL(1); + +/**Open a stream using the given set of callbacks to access it. + \param _source The stream to read from (e.g., a <code>FILE *</code>). + \param _cb The callbacks with which to access the stream. + <code><a href="#op_read_func">read()</a></code> must + be implemented. + <code><a href="#op_seek_func">seek()</a></code> and + <code><a href="#op_tell_func">tell()</a></code> may + be <code>NULL</code>, or may always return -1 to + indicate a source is unseekable, but if + <code><a href="#op_seek_func">seek()</a></code> is + implemented and succeeds on a particular source, then + <code><a href="#op_tell_func">tell()</a></code> must + also. + <code><a href="#op_close_func">close()</a></code> may + be <code>NULL</code>, but if it is not, it will be + called when the \c OggOpusFile is destroyed by + op_free(). + It will not be called if op_open_callbacks() fails + with an error. + \param _initial_data An initial buffer of data from the start of the + stream. + Applications can read some number of bytes from the + start of the stream to help identify this as an Opus + stream, and then provide them here to allow the + stream to be opened, even if it is unseekable. + \param _initial_bytes The number of bytes in \a _initial_data. + If the stream is seekable, its current position (as + reported by + <code><a href="#opus_tell_func">tell()</a></code> + at the start of this function) must be equal to + \a _initial_bytes. + Otherwise, seeking to absolute positions will + generate inconsistent results. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want + the failure code. + The failure code will be one of + <dl> + <dt>#OP_EREAD</dt> + <dd>An underlying read, seek, or tell operation + failed when it should have succeeded, or we failed + to find data in the stream we had seen before.</dd> + <dt>#OP_EFAULT</dt> + <dd>There was a memory allocation failure, or an + internal library error.</dd> + <dt>#OP_EIMPL</dt> + <dd>The stream used a feature that is not + implemented, such as an unsupported channel + family.</dd> + <dt>#OP_EINVAL</dt> + <dd><code><a href="#op_seek_func">seek()</a></code> + was implemented and succeeded on this source, but + <code><a href="#op_tell_func">tell()</a></code> + did not, or the starting position indicator was + not equal to \a _initial_bytes.</dd> + <dt>#OP_ENOTFORMAT</dt> + <dd>The stream contained a link that did not have + any logical Opus streams in it.</dd> + <dt>#OP_EBADHEADER</dt> + <dd>A required header packet was not properly + formatted, contained illegal values, or was missing + altogether.</dd> + <dt>#OP_EVERSION</dt> + <dd>An ID header contained an unrecognized version + number.</dd> + <dt>#OP_EBADLINK</dt> + <dd>We failed to find data we had seen before after + seeking.</dd> + <dt>#OP_EBADTIMESTAMP</dt> + <dd>The first or last timestamp in a link failed + basic validity checks.</dd> + </dl> + \return A freshly opened \c OggOpusFile, or <code>NULL</code> on error. + <tt>libopusfile</tt> does <em>not</em> take ownership of the source + if the call fails. + The calling application is responsible for closing the source if + this call returns an error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_open_callbacks(void *_source, + const OpusFileCallbacks *_cb,const unsigned char *_initial_data, + size_t _initial_bytes,int *_error) OP_ARG_NONNULL(2); + +/**Partially open a stream from the given file path. + \see op_test_callbacks + \param _path The path to the file to open. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want the + failure code. + The failure code will be #OP_EFAULT if the file could not + be opened, or one of the other failure codes from + op_open_callbacks() otherwise. + \return A partially opened \c OggOpusFile, or <code>NULL</code> on error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_test_file(const char *_path,int *_error) + OP_ARG_NONNULL(1); + +/**Partially open a stream from a memory buffer. + \see op_test_callbacks + \param _data The memory buffer to open. + \param _size The number of bytes in the buffer. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want the + failure code. + See op_open_callbacks() for a full list of failure codes. + \return A partially opened \c OggOpusFile, or <code>NULL</code> on error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_test_memory(const unsigned char *_data, + size_t _size,int *_error); + +/**Partially open a stream from a URL. + This function behaves identically to op_test_url(), except that it + takes a va_list instead of a variable number of arguments. + It does not call the <code>va_end</code> macro, and because it invokes the + <code>va_arg</code> macro, the value of \a _ap is undefined after the call. + \note If you use this function, you must link against <tt>libopusurl</tt>. + \see op_test_url + \see op_test_callbacks + \param _url The URL to open. + Currently only the <file:>, <http:>, and <https:> + schemes are supported. + Both <http:> and <https:> may be disabled at compile + time, in which case opening such URLs will always + fail. + Currently this only supports URIs. + IRIs should be converted to UTF-8 and URL-escaped, + with internationalized domain names encoded in + punycode, before passing them to this function. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want + the failure code. + See op_open_callbacks() for a full list of failure + codes. + \param[in,out] _ap A list of the \ref url_options "optional flags" to + use. + This is a variable-length list of options terminated + with <code>NULL</code>. + \return A partially opened \c OggOpusFile, or <code>NULL</code> on error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_vtest_url(const char *_url, + int *_error,va_list _ap) OP_ARG_NONNULL(1); + +/**Partially open a stream from a URL. + \note If you use this function, you must link against <tt>libopusurl</tt>. + \see op_test_callbacks + \param _url The URL to open. + Currently only the <file:>, <http:>, and <https:> + schemes are supported. + Both <http:> and <https:> may be disabled at compile + time, in which case opening such URLs will always fail. + Currently this only supports URIs. + IRIs should be converted to UTF-8 and URL-escaped, with + internationalized domain names encoded in punycode, + before passing them to this function. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want the + failure code. + See op_open_callbacks() for a full list of failure + codes. + \param ... The \ref url_options "optional flags" to use. + This is a variable-length list of options terminated + with <code>NULL</code>. + \return A partially opened \c OggOpusFile, or <code>NULL</code> on error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_test_url(const char *_url, + int *_error,...) OP_ARG_NONNULL(1); + +/**Partially open a stream using the given set of callbacks to access it. + This tests for Opusness and loads the headers for the first link. + It does not seek (although it tests for seekability). + You can query a partially open stream for the few pieces of basic + information returned by op_serialno(), op_channel_count(), op_head(), and + op_tags() (but only for the first link). + You may also determine if it is seekable via a call to op_seekable(). + You cannot read audio from the stream, seek, get the size or duration, + get information from links other than the first one, or even get the total + number of links until you finish opening the stream with op_test_open(). + If you do not need to do any of these things, you can dispose of it with + op_free() instead. + + This function is provided mostly to simplify porting existing code that used + <tt>libvorbisfile</tt>. + For new code, you are likely better off using op_test() instead, which + is less resource-intensive, requires less data to succeed, and imposes a + hard limit on the amount of data it examines (important for unseekable + sources, where all such data must be buffered until you are sure of the + stream type). + \param _source The stream to read from (e.g., a <code>FILE *</code>). + \param _cb The callbacks with which to access the stream. + <code><a href="#op_read_func">read()</a></code> must + be implemented. + <code><a href="#op_seek_func">seek()</a></code> and + <code><a href="#op_tell_func">tell()</a></code> may + be <code>NULL</code>, or may always return -1 to + indicate a source is unseekable, but if + <code><a href="#op_seek_func">seek()</a></code> is + implemented and succeeds on a particular source, then + <code><a href="#op_tell_func">tell()</a></code> must + also. + <code><a href="#op_close_func">close()</a></code> may + be <code>NULL</code>, but if it is not, it will be + called when the \c OggOpusFile is destroyed by + op_free(). + It will not be called if op_open_callbacks() fails + with an error. + \param _initial_data An initial buffer of data from the start of the + stream. + Applications can read some number of bytes from the + start of the stream to help identify this as an Opus + stream, and then provide them here to allow the + stream to be tested more thoroughly, even if it is + unseekable. + \param _initial_bytes The number of bytes in \a _initial_data. + If the stream is seekable, its current position (as + reported by + <code><a href="#opus_tell_func">tell()</a></code> + at the start of this function) must be equal to + \a _initial_bytes. + Otherwise, seeking to absolute positions will + generate inconsistent results. + \param[out] _error Returns 0 on success, or a failure code on error. + You may pass in <code>NULL</code> if you don't want + the failure code. + See op_open_callbacks() for a full list of failure + codes. + \return A partially opened \c OggOpusFile, or <code>NULL</code> on error. + <tt>libopusfile</tt> does <em>not</em> take ownership of the source + if the call fails. + The calling application is responsible for closing the source if + this call returns an error.*/ +OP_WARN_UNUSED_RESULT OggOpusFile *op_test_callbacks(void *_source, + const OpusFileCallbacks *_cb,const unsigned char *_initial_data, + size_t _initial_bytes,int *_error) OP_ARG_NONNULL(2); + +/**Finish opening a stream partially opened with op_test_callbacks() or one of + the associated convenience functions. + If this function fails, you are still responsible for freeing the + \c OggOpusFile with op_free(). + \param _of The \c OggOpusFile to finish opening. + \return 0 on success, or a negative value on error. + \retval #OP_EREAD An underlying read, seek, or tell operation failed + when it should have succeeded. + \retval #OP_EFAULT There was a memory allocation failure, or an + internal library error. + \retval #OP_EIMPL The stream used a feature that is not implemented, + such as an unsupported channel family. + \retval #OP_EINVAL The stream was not partially opened with + op_test_callbacks() or one of the associated + convenience functions. + \retval #OP_ENOTFORMAT The stream contained a link that did not have any + logical Opus streams in it. + \retval #OP_EBADHEADER A required header packet was not properly + formatted, contained illegal values, or was + missing altogether. + \retval #OP_EVERSION An ID header contained an unrecognized version + number. + \retval #OP_EBADLINK We failed to find data we had seen before after + seeking. + \retval #OP_EBADTIMESTAMP The first or last timestamp in a link failed basic + validity checks.*/ +int op_test_open(OggOpusFile *_of) OP_ARG_NONNULL(1); + +/**Release all memory used by an \c OggOpusFile. + \param _of The \c OggOpusFile to free.*/ +void op_free(OggOpusFile *_of); + +/*@}*/ +/*@}*/ + +/**\defgroup stream_info Stream Information*/ +/*@{*/ +/**\name Functions for obtaining information about streams + + These functions allow you to get basic information about a stream, including + seekability, the number of links (for chained streams), plus the size, + duration, bitrate, header parameters, and meta information for each link + (or, where available, the stream as a whole). + Some of these (size, duration) are only available for seekable streams. + You can also query the current stream position, link, and playback time, + and instantaneous bitrate during playback. + + Some of these functions may be used successfully on the partially open + streams returned by op_test_callbacks() or one of the associated + convenience functions. + Their documention will indicate so explicitly.*/ +/*@{*/ + +/**Returns whether or not the data source being read is seekable. + This is true if + <ol> + <li>The <code><a href="#op_seek_func">seek()</a></code> and + <code><a href="#op_tell_func">tell()</a></code> callbacks are both + non-<code>NULL</code>,</li> + <li>The <code><a href="#op_seek_func">seek()</a></code> callback was + successfully executed at least once, and</li> + <li>The <code><a href="#op_tell_func">tell()</a></code> callback was + successfully able to report the position indicator afterwards.</li> + </ol> + This function may be called on partially-opened streams. + \param _of The \c OggOpusFile whose seekable status is to be returned. + \return A non-zero value if seekable, and 0 if unseekable.*/ +int op_seekable(const OggOpusFile *_of) OP_ARG_NONNULL(1); + +/**Returns the number of links in this chained stream. + This function may be called on partially-opened streams, but it will always + return 1. + The actual number of links is not known until the stream is fully opened. + \param _of The \c OggOpusFile from which to retrieve the link count. + \return For fully-open seekable sources, this returns the total number of + links in the whole stream, which will be at least 1. + For partially-open or unseekable sources, this always returns 1.*/ +int op_link_count(const OggOpusFile *_of) OP_ARG_NONNULL(1); + +/**Get the serial number of the given link in a (possibly-chained) Ogg Opus + stream. + This function may be called on partially-opened streams, but it will always + return the serial number of the Opus stream in the first link. + \param _of The \c OggOpusFile from which to retrieve the serial number. + \param _li The index of the link whose serial number should be retrieved. + Use a negative number to get the serial number of the current + link. + \return The serial number of the given link. + If \a _li is greater than the total number of links, this returns + the serial number of the last link. + If the source is not seekable, this always returns the serial number + of the current link.*/ +opus_uint32 op_serialno(const OggOpusFile *_of,int _li) OP_ARG_NONNULL(1); + +/**Get the channel count of the given link in a (possibly-chained) Ogg Opus + stream. + This is equivalent to <code>op_head(_of,_li)->channel_count</code>, but + is provided for convenience. + This function may be called on partially-opened streams, but it will always + return the channel count of the Opus stream in the first link. + \param _of The \c OggOpusFile from which to retrieve the channel count. + \param _li The index of the link whose channel count should be retrieved. + Use a negative number to get the channel count of the current + link. + \return The channel count of the given link. + If \a _li is greater than the total number of links, this returns + the channel count of the last link. + If the source is not seekable, this always returns the channel count + of the current link.*/ +int op_channel_count(const OggOpusFile *_of,int _li) OP_ARG_NONNULL(1); + +/**Get the total (compressed) size of the stream, or of an individual link in + a (possibly-chained) Ogg Opus stream, including all headers and Ogg muxing + overhead. + \warning If the Opus stream (or link) is concurrently multiplexed with other + logical streams (e.g., video), this returns the size of the entire stream + (or link), not just the number of bytes in the first logical Opus stream. + Returning the latter would require scanning the entire file. + \param _of The \c OggOpusFile from which to retrieve the compressed size. + \param _li The index of the link whose compressed size should be computed. + Use a negative number to get the compressed size of the entire + stream. + \return The compressed size of the entire stream if \a _li is negative, the + compressed size of link \a _li if it is non-negative, or a negative + value on error. + The compressed size of the entire stream may be smaller than that + of the underlying source if trailing garbage was detected in the + file. + \retval #OP_EINVAL The source is not seekable (so we can't know the length), + \a _li wasn't less than the total number of links in + the stream, or the stream was only partially open.*/ +opus_int64 op_raw_total(const OggOpusFile *_of,int _li) OP_ARG_NONNULL(1); + +/**Get the total PCM length (number of samples at 48 kHz) of the stream, or of + an individual link in a (possibly-chained) Ogg Opus stream. + Users looking for <code>op_time_total()</code> should use op_pcm_total() + instead. + Because timestamps in Opus are fixed at 48 kHz, there is no need for a + separate function to convert this to seconds (and leaving it out avoids + introducing floating point to the API, for those that wish to avoid it). + \param _of The \c OggOpusFile from which to retrieve the PCM offset. + \param _li The index of the link whose PCM length should be computed. + Use a negative number to get the PCM length of the entire stream. + \return The PCM length of the entire stream if \a _li is negative, the PCM + length of link \a _li if it is non-negative, or a negative value on + error. + \retval #OP_EINVAL The source is not seekable (so we can't know the length), + \a _li wasn't less than the total number of links in + the stream, or the stream was only partially open.*/ +ogg_int64_t op_pcm_total(const OggOpusFile *_of,int _li) OP_ARG_NONNULL(1); + +/**Get the ID header information for the given link in a (possibly chained) Ogg + Opus stream. + This function may be called on partially-opened streams, but it will always + return the ID header information of the Opus stream in the first link. + \param _of The \c OggOpusFile from which to retrieve the ID header + information. + \param _li The index of the link whose ID header information should be + retrieved. + Use a negative number to get the ID header information of the + current link. + For an unseekable stream, \a _li is ignored, and the ID header + information for the current link is always returned, if + available. + \return The contents of the ID header for the given link.*/ +const OpusHead *op_head(const OggOpusFile *_of,int _li) OP_ARG_NONNULL(1); + +/**Get the comment header information for the given link in a (possibly + chained) Ogg Opus stream. + This function may be called on partially-opened streams, but it will always + return the tags from the Opus stream in the first link. + \param _of The \c OggOpusFile from which to retrieve the comment header + information. + \param _li The index of the link whose comment header information should be + retrieved. + Use a negative number to get the comment header information of + the current link. + For an unseekable stream, \a _li is ignored, and the comment + header information for the current link is always returned, if + available. + \return The contents of the comment header for the given link, or + <code>NULL</code> if this is an unseekable stream that encountered + an invalid link.*/ +const OpusTags *op_tags(const OggOpusFile *_of,int _li) OP_ARG_NONNULL(1); + +/**Retrieve the index of the current link. + This is the link that produced the data most recently read by + op_read_float() or its associated functions, or, after a seek, the link + that the seek target landed in. + Reading more data may advance the link index (even on the first read after a + seek). + \param _of The \c OggOpusFile from which to retrieve the current link index. + \return The index of the current link on success, or a negative value on + failure. + For seekable streams, this is a number between 0 and the value + returned by op_link_count(). + For unseekable streams, this value starts at 0 and increments by one + each time a new link is encountered (even though op_link_count() + always returns 1). + \retval #OP_EINVAL The stream was only partially open.*/ +int op_current_link(const OggOpusFile *_of) OP_ARG_NONNULL(1); + +/**Computes the bitrate of the stream, or of an individual link in a + (possibly-chained) Ogg Opus stream. + The stream must be seekable to compute the bitrate. + For unseekable streams, use op_bitrate_instant() to get periodic estimates. + \warning If the Opus stream (or link) is concurrently multiplexed with other + logical streams (e.g., video), this uses the size of the entire stream (or + link) to compute the bitrate, not just the number of bytes in the first + logical Opus stream. + Returning the latter requires scanning the entire file, but this may be done + by decoding the whole file and calling op_bitrate_instant() once at the + end. + Install a trivial decoding callback with op_set_decode_callback() if you + wish to skip actual decoding during this process. + \param _of The \c OggOpusFile from which to retrieve the bitrate. + \param _li The index of the link whose bitrate should be computed. + Use a negative number to get the bitrate of the whole stream. + \return The bitrate on success, or a negative value on error. + \retval #OP_EINVAL The stream was only partially open, the stream was not + seekable, or \a _li was larger than the number of + links.*/ +opus_int32 op_bitrate(const OggOpusFile *_of,int _li) OP_ARG_NONNULL(1); + +/**Compute the instantaneous bitrate, measured as the ratio of bits to playable + samples decoded since a) the last call to op_bitrate_instant(), b) the last + seek, or c) the start of playback, whichever was most recent. + This will spike somewhat after a seek or at the start/end of a chain + boundary, as pre-skip, pre-roll, and end-trimming causes samples to be + decoded but not played. + \param _of The \c OggOpusFile from which to retrieve the bitrate. + \return The bitrate, in bits per second, or a negative value on error. + \retval #OP_FALSE No data has been decoded since any of the events + described above. + \retval #OP_EINVAL The stream was only partially open.*/ +opus_int32 op_bitrate_instant(OggOpusFile *_of) OP_ARG_NONNULL(1); + +/**Obtain the current value of the position indicator for \a _of. + \param _of The \c OggOpusFile from which to retrieve the position indicator. + \return The byte position that is currently being read from. + \retval #OP_EINVAL The stream was only partially open.*/ +opus_int64 op_raw_tell(const OggOpusFile *_of) OP_ARG_NONNULL(1); + +/**Obtain the PCM offset of the next sample to be read. + If the stream is not properly timestamped, this might not increment by the + proper amount between reads, or even return monotonically increasing + values. + \param _of The \c OggOpusFile from which to retrieve the PCM offset. + \return The PCM offset of the next sample to be read. + \retval #OP_EINVAL The stream was only partially open.*/ +ogg_int64_t op_pcm_tell(const OggOpusFile *_of) OP_ARG_NONNULL(1); + +/*@}*/ +/*@}*/ + +/**\defgroup stream_seeking Seeking*/ +/*@{*/ +/**\name Functions for seeking in Opus streams + + These functions let you seek in Opus streams, if the underlying source + support it. + Seeking is implemented for all built-in stream I/O routines, though some + individual sources may not be seekable (pipes, live HTTP streams, or HTTP + streams from a server that does not support <code>Range</code> requests). + + op_raw_seek() is the fastest: it is guaranteed to perform at most one + physical seek, but, since the target is a byte position, makes no guarantee + how close to a given time it will come. + op_pcm_seek() provides sample-accurate seeking. + The number of physical seeks it requires is still quite small (often 1 or + 2, even in highly variable bitrate streams). + + Seeking in Opus requires decoding some pre-roll amount before playback to + allow the internal state to converge (as if recovering from packet loss). + This is handled internally by <tt>libopusfile</tt>, but means there is + little extra overhead for decoding up to the exact position requested + (since it must decode some amount of audio anyway). + It also means that decoding after seeking may not return exactly the same + values as would be obtained by decoding the stream straight through. + However, such differences are expected to be smaller than the loss + introduced by Opus's lossy compression.*/ +/*@{*/ + +/**Seek to a byte offset relative to the <b>compressed</b> data. + This also scans packets to update the PCM cursor. + It will cross a logical bitstream boundary, but only if it can't get any + packets out of the tail of the link to which it seeks. + \param _of The \c OggOpusFile in which to seek. + \param _byte_offset The byte position to seek to. + \return 0 on success, or a negative error code on failure. + \retval #OP_EREAD The underlying seek operation failed. + \retval #OP_EINVAL The stream was only partially open, or the target was + outside the valid range for the stream. + \retval #OP_ENOSEEK This stream is not seekable. + \retval #OP_EBADLINK Failed to initialize a decoder for a stream for an + unknown reason.*/ +int op_raw_seek(OggOpusFile *_of,opus_int64 _byte_offset) OP_ARG_NONNULL(1); + +/**Seek to the specified PCM offset, such that decoding will begin at exactly + the requested position. + \param _of The \c OggOpusFile in which to seek. + \param _pcm_offset The PCM offset to seek to. + This is in samples at 48 kHz relative to the start of the + stream. + \return 0 on success, or a negative value on error. + \retval #OP_EREAD An underlying read or seek operation failed. + \retval #OP_EINVAL The stream was only partially open, or the target was + outside the valid range for the stream. + \retval #OP_ENOSEEK This stream is not seekable. + \retval #OP_EBADLINK We failed to find data we had seen before, or the + bitstream structure was sufficiently malformed that + seeking to the target destination was impossible.*/ +int op_pcm_seek(OggOpusFile *_of,ogg_int64_t _pcm_offset) OP_ARG_NONNULL(1); + +/*@}*/ +/*@}*/ + +/**\defgroup stream_decoding Decoding*/ +/*@{*/ +/**\name Functions for decoding audio data + + These functions retrieve actual decoded audio data from the stream. + The general functions, op_read() and op_read_float() return 16-bit or + floating-point output, both using native endian ordering. + The number of channels returned can change from link to link in a chained + stream. + There are special functions, op_read_stereo() and op_read_float_stereo(), + which always output two channels, to simplify applications which do not + wish to handle multichannel audio. + These downmix multichannel files to two channels, so they can always return + samples in the same format for every link in a chained file. + + If the rest of your audio processing chain can handle floating point, those + routines should be preferred, as floating point output avoids introducing + clipping and other issues which might be avoided entirely if, e.g., you + scale down the volume at some other stage. + However, if you intend to direct consume 16-bit samples, the conversion in + <tt>libopusfile</tt> provides noise-shaping dithering and, if compiled + against <tt>libopus</tt> 1.1 or later, soft-clipping prevention. + + <tt>libopusfile</tt> can also be configured at compile time to use the + fixed-point <tt>libopus</tt> API. + If so, <tt>libopusfile</tt>'s floating-point API may also be disabled. + In that configuration, nothing in <tt>libopusfile</tt> will use any + floating-point operations, to simplify support on devices without an + adequate FPU. + + \warning HTTPS streams may be be vulnerable to truncation attacks if you do + not check the error return code from op_read_float() or its associated + functions. + If the remote peer does not close the connection gracefully (with a TLS + "close notify" message), these functions will return #OP_EREAD instead of 0 + when they reach the end of the file. + If you are reading from an <https:> URL (particularly if seeking is not + supported), you should make sure to check for this error and warn the user + appropriately.*/ +/*@{*/ + +/**Indicates that the decoding callback should produce signed 16-bit + native-endian output samples.*/ +#define OP_DEC_FORMAT_SHORT (7008) +/**Indicates that the decoding callback should produce 32-bit native-endian + float samples.*/ +#define OP_DEC_FORMAT_FLOAT (7040) + +/**Indicates that the decoding callback did not decode anything, and that + <tt>libopusfile</tt> should decode normally instead.*/ +#define OP_DEC_USE_DEFAULT (6720) + +/**Called to decode an Opus packet. + This should invoke the functional equivalent of opus_multistream_decode() or + opus_multistream_decode_float(), except that it returns 0 on success + instead of the number of decoded samples (which is known a priori). + \param _ctx The application-provided callback context. + \param _decoder The decoder to use to decode the packet. + \param[out] _pcm The buffer to decode into. + This will always have enough room for \a _nchannels of + \a _nsamples samples, which should be placed into this + buffer interleaved. + \param _op The packet to decode. + This will always have its granule position set to a valid + value. + \param _nsamples The number of samples expected from the packet. + \param _nchannels The number of channels expected from the packet. + \param _format The desired sample output format. + This is either #OP_DEC_FORMAT_SHORT or + #OP_DEC_FORMAT_FLOAT. + \param _li The index of the link from which this packet was decoded. + \return A non-negative value on success, or a negative value on error. + The error codes should be the same as those returned by + opus_multistream_decode() or opus_multistream_decode_float(). + \retval 0 Decoding was successful. + The application has filled the buffer with + exactly <code>\a _nsamples*\a + _nchannels</code> samples in the requested + format. + \retval #OP_DEC_USE_DEFAULT No decoding was done. + <tt>libopusfile</tt> should decode normally + instead.*/ +typedef int (*op_decode_cb_func)(void *_ctx,OpusMSDecoder *_decoder,void *_pcm, + const ogg_packet *_op,int _nsamples,int _nchannels,int _format,int _li); + +/**Sets the packet decode callback function. + This is called once for each packet that needs to be decoded. + A call to this function is no guarantee that the audio will eventually be + delivered to the application. + Some or all of the data from the packet may be discarded (i.e., at the + beginning or end of a link, or after a seek), however the callback is + required to provide all of it. + \param _of The \c OggOpusFile on which to set the decode callback. + \param _decode_cb The callback function to call. + This may be <code>NULL</code> to disable calling the + callback. + \param _ctx The application-provided context pointer to pass to the + callback on each call.*/ +void op_set_decode_callback(OggOpusFile *_of, + op_decode_cb_func _decode_cb,void *_ctx) OP_ARG_NONNULL(1); + +/**Gain offset type that indicates that the provided offset is relative to the + header gain. + This is the default.*/ +#define OP_HEADER_GAIN (0) + +/**Gain offset type that indicates that the provided offset is relative to the + R128_TRACK_GAIN value (if any), in addition to the header gain.*/ +#define OP_TRACK_GAIN (3008) + +/**Gain offset type that indicates that the provided offset should be used as + the gain directly, without applying any the header or track gains.*/ +#define OP_ABSOLUTE_GAIN (3009) + +/**Sets the gain to be used for decoded output. + By default, the gain in the header is applied with no additional offset. + The total gain (including header gain and/or track gain, if applicable, and + this offset), will be clamped to [-32768,32767]/256 dB. + This is more than enough to saturate or underflow 16-bit PCM. + \note The new gain will not be applied to any already buffered, decoded + output. + This means you cannot change it sample-by-sample, as at best it will be + updated packet-by-packet. + It is meant for setting a target volume level, rather than applying smooth + fades, etc. + \param _of The \c OggOpusFile on which to set the gain offset. + \param _gain_type One of #OP_HEADER_GAIN, #OP_TRACK_GAIN, or + #OP_ABSOLUTE_GAIN. + \param _gain_offset_q8 The gain offset to apply, in 1/256ths of a dB. + \return 0 on success or a negative value on error. + \retval #OP_EINVAL The \a _gain_type was unrecognized.*/ +int op_set_gain_offset(OggOpusFile *_of, + int _gain_type,opus_int32 _gain_offset_q8) OP_ARG_NONNULL(1); + +/**Sets whether or not dithering is enabled for 16-bit decoding. + By default, when <tt>libopusfile</tt> is compiled to use floating-point + internally, calling op_read() or op_read_stereo() will first decode to + float, and then convert to fixed-point using noise-shaping dithering. + This flag can be used to disable that dithering. + When the application uses op_read_float() or op_read_float_stereo(), or when + the library has been compiled to decode directly to fixed point, this flag + has no effect. + \param _of The \c OggOpusFile on which to enable or disable dithering. + \param _enabled A non-zero value to enable dithering, or 0 to disable it.*/ +void op_set_dither_enabled(OggOpusFile *_of,int _enabled) OP_ARG_NONNULL(1); + +/**Reads more samples from the stream. + \note Although \a _buf_size must indicate the total number of values that + can be stored in \a _pcm, the return value is the number of samples + <em>per channel</em>. + This is done because + <ol> + <li>The channel count cannot be known a priori (reading more samples might + advance us into the next link, with a different channel count), so + \a _buf_size cannot also be in units of samples per channel,</li> + <li>Returning the samples per channel matches the <code>libopus</code> API + as closely as we're able,</li> + <li>Returning the total number of values instead of samples per channel + would mean the caller would need a division to compute the samples per + channel, and might worry about the possibility of getting back samples + for some channels and not others, and</li> + <li>This approach is relatively fool-proof: if an application passes too + small a value to \a _buf_size, they will simply get fewer samples back, + and if they assume the return value is the total number of values, then + they will simply read too few (rather than reading too many and going + off the end of the buffer).</li> + </ol> + \param _of The \c OggOpusFile from which to read. + \param[out] _pcm A buffer in which to store the output PCM samples, as + signed native-endian 16-bit values at 48 kHz + with a nominal range of <code>[-32768,32767)</code>. + Multiple channels are interleaved using the + <a href="http://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-800004.3.9">Vorbis + channel ordering</a>. + This must have room for at least \a _buf_size values. + \param _buf_size The number of values that can be stored in \a _pcm. + It is recommended that this be large enough for at + least 120 ms of data at 48 kHz per channel (5760 + values per channel). + Smaller buffers will simply return less data, possibly + consuming more memory to buffer the data internally. + <tt>libopusfile</tt> may return less data than + requested. + If so, there is no guarantee that the remaining data + in \a _pcm will be unmodified. + \param[out] _li The index of the link this data was decoded from. + You may pass <code>NULL</code> if you do not need this + information. + If this function fails (returning a negative value), + this parameter is left unset. + \return The number of samples read per channel on success, or a negative + value on failure. + The channel count can be retrieved on success by calling + <code>op_head(_of,*_li)</code>. + The number of samples returned may be 0 if the buffer was too small + to store even a single sample for all channels, or if end-of-file + was reached. + The list of possible failure codes follows. + Most of them can only be returned by unseekable, chained streams + that encounter a new link. + \retval #OP_HOLE There was a hole in the data, and some samples + may have been skipped. + Call this function again to continue decoding + past the hole. + \retval #OP_EREAD An underlying read operation failed. + This may signal a truncation attack from an + <https:> source. + \retval #OP_EFAULT An internal memory allocation failed. + \retval #OP_EIMPL An unseekable stream encountered a new link that + used a feature that is not implemented, such as + an unsupported channel family. + \retval #OP_EINVAL The stream was only partially open. + \retval #OP_ENOTFORMAT An unseekable stream encountered a new link that + did not have any logical Opus streams in it. + \retval #OP_EBADHEADER An unseekable stream encountered a new link with a + required header packet that was not properly + formatted, contained illegal values, or was + missing altogether. + \retval #OP_EVERSION An unseekable stream encountered a new link with + an ID header that contained an unrecognized + version number. + \retval #OP_EBADPACKET Failed to properly decode the next packet. + \retval #OP_EBADLINK We failed to find data we had seen before. + \retval #OP_EBADTIMESTAMP An unseekable stream encountered a new link with + a starting timestamp that failed basic validity + checks.*/ +OP_WARN_UNUSED_RESULT int op_read(OggOpusFile *_of, + opus_int16 *_pcm,int _buf_size,int *_li) OP_ARG_NONNULL(1); + +/**Reads more samples from the stream. + \note Although \a _buf_size must indicate the total number of values that + can be stored in \a _pcm, the return value is the number of samples + <em>per channel</em>. + <ol> + <li>The channel count cannot be known a priori (reading more samples might + advance us into the next link, with a different channel count), so + \a _buf_size cannot also be in units of samples per channel,</li> + <li>Returning the samples per channel matches the <code>libopus</code> API + as closely as we're able,</li> + <li>Returning the total number of values instead of samples per channel + would mean the caller would need a division to compute the samples per + channel, and might worry about the possibility of getting back samples + for some channels and not others, and</li> + <li>This approach is relatively fool-proof: if an application passes too + small a value to \a _buf_size, they will simply get fewer samples back, + and if they assume the return value is the total number of values, then + they will simply read too few (rather than reading too many and going + off the end of the buffer).</li> + </ol> + \param _of The \c OggOpusFile from which to read. + \param[out] _pcm A buffer in which to store the output PCM samples as + signed floats at 48 kHz with a nominal range of + <code>[-1.0,1.0]</code>. + Multiple channels are interleaved using the + <a href="http://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-800004.3.9">Vorbis + channel ordering</a>. + This must have room for at least \a _buf_size floats. + \param _buf_size The number of floats that can be stored in \a _pcm. + It is recommended that this be large enough for at + least 120 ms of data at 48 kHz per channel (5760 + samples per channel). + Smaller buffers will simply return less data, possibly + consuming more memory to buffer the data internally. + If less than \a _buf_size values are returned, + <tt>libopusfile</tt> makes no guarantee that the + remaining data in \a _pcm will be unmodified. + \param[out] _li The index of the link this data was decoded from. + You may pass <code>NULL</code> if you do not need this + information. + If this function fails (returning a negative value), + this parameter is left unset. + \return The number of samples read per channel on success, or a negative + value on failure. + The channel count can be retrieved on success by calling + <code>op_head(_of,*_li)</code>. + The number of samples returned may be 0 if the buffer was too small + to store even a single sample for all channels, or if end-of-file + was reached. + The list of possible failure codes follows. + Most of them can only be returned by unseekable, chained streams + that encounter a new link. + \retval #OP_HOLE There was a hole in the data, and some samples + may have been skipped. + Call this function again to continue decoding + past the hole. + \retval #OP_EREAD An underlying read operation failed. + This may signal a truncation attack from an + <https:> source. + \retval #OP_EFAULT An internal memory allocation failed. + \retval #OP_EIMPL An unseekable stream encountered a new link that + used a feature that is not implemented, such as + an unsupported channel family. + \retval #OP_EINVAL The stream was only partially open. + \retval #OP_ENOTFORMAT An unseekable stream encountered a new link that + did not have any logical Opus streams in it. + \retval #OP_EBADHEADER An unseekable stream encountered a new link with a + required header packet that was not properly + formatted, contained illegal values, or was + missing altogether. + \retval #OP_EVERSION An unseekable stream encountered a new link with + an ID header that contained an unrecognized + version number. + \retval #OP_EBADPACKET Failed to properly decode the next packet. + \retval #OP_EBADLINK We failed to find data we had seen before. + \retval #OP_EBADTIMESTAMP An unseekable stream encountered a new link with + a starting timestamp that failed basic validity + checks.*/ +OP_WARN_UNUSED_RESULT int op_read_float(OggOpusFile *_of, + float *_pcm,int _buf_size,int *_li) OP_ARG_NONNULL(1); + +/**Reads more samples from the stream and downmixes to stereo, if necessary. + This function is intended for simple players that want a uniform output + format, even if the channel count changes between links in a chained + stream. + \note \a _buf_size indicates the total number of values that can be stored + in \a _pcm, while the return value is the number of samples <em>per + channel</em>, even though the channel count is known, for consistency with + op_read(). + \param _of The \c OggOpusFile from which to read. + \param[out] _pcm A buffer in which to store the output PCM samples, as + signed native-endian 16-bit values at 48 kHz + with a nominal range of <code>[-32768,32767)</code>. + The left and right channels are interleaved in the + buffer. + This must have room for at least \a _buf_size values. + \param _buf_size The number of values that can be stored in \a _pcm. + It is recommended that this be large enough for at + least 120 ms of data at 48 kHz per channel (11520 + values total). + Smaller buffers will simply return less data, possibly + consuming more memory to buffer the data internally. + If less than \a _buf_size values are returned, + <tt>libopusfile</tt> makes no guarantee that the + remaining data in \a _pcm will be unmodified. + \return The number of samples read per channel on success, or a negative + value on failure. + The number of samples returned may be 0 if the buffer was too small + to store even a single sample for both channels, or if end-of-file + was reached. + The list of possible failure codes follows. + Most of them can only be returned by unseekable, chained streams + that encounter a new link. + \retval #OP_HOLE There was a hole in the data, and some samples + may have been skipped. + Call this function again to continue decoding + past the hole. + \retval #OP_EREAD An underlying read operation failed. + This may signal a truncation attack from an + <https:> source. + \retval #OP_EFAULT An internal memory allocation failed. + \retval #OP_EIMPL An unseekable stream encountered a new link that + used a feature that is not implemented, such as + an unsupported channel family. + \retval #OP_EINVAL The stream was only partially open. + \retval #OP_ENOTFORMAT An unseekable stream encountered a new link that + did not have any logical Opus streams in it. + \retval #OP_EBADHEADER An unseekable stream encountered a new link with a + required header packet that was not properly + formatted, contained illegal values, or was + missing altogether. + \retval #OP_EVERSION An unseekable stream encountered a new link with + an ID header that contained an unrecognized + version number. + \retval #OP_EBADPACKET Failed to properly decode the next packet. + \retval #OP_EBADLINK We failed to find data we had seen before. + \retval #OP_EBADTIMESTAMP An unseekable stream encountered a new link with + a starting timestamp that failed basic validity + checks.*/ +OP_WARN_UNUSED_RESULT int op_read_stereo(OggOpusFile *_of, + opus_int16 *_pcm,int _buf_size) OP_ARG_NONNULL(1); + +/**Reads more samples from the stream and downmixes to stereo, if necessary. + This function is intended for simple players that want a uniform output + format, even if the channel count changes between links in a chained + stream. + \note \a _buf_size indicates the total number of values that can be stored + in \a _pcm, while the return value is the number of samples <em>per + channel</em>, even though the channel count is known, for consistency with + op_read_float(). + \param _of The \c OggOpusFile from which to read. + \param[out] _pcm A buffer in which to store the output PCM samples, as + signed floats at 48 kHz with a nominal range of + <code>[-1.0,1.0]</code>. + The left and right channels are interleaved in the + buffer. + This must have room for at least \a _buf_size values. + \param _buf_size The number of values that can be stored in \a _pcm. + It is recommended that this be large enough for at + least 120 ms of data at 48 kHz per channel (11520 + values total). + Smaller buffers will simply return less data, possibly + consuming more memory to buffer the data internally. + If less than \a _buf_size values are returned, + <tt>libopusfile</tt> makes no guarantee that the + remaining data in \a _pcm will be unmodified. + \return The number of samples read per channel on success, or a negative + value on failure. + The number of samples returned may be 0 if the buffer was too small + to store even a single sample for both channels, or if end-of-file + was reached. + The list of possible failure codes follows. + Most of them can only be returned by unseekable, chained streams + that encounter a new link. + \retval #OP_HOLE There was a hole in the data, and some samples + may have been skipped. + Call this function again to continue decoding + past the hole. + \retval #OP_EREAD An underlying read operation failed. + This may signal a truncation attack from an + <https:> source. + \retval #OP_EFAULT An internal memory allocation failed. + \retval #OP_EIMPL An unseekable stream encountered a new link that + used a feature that is not implemented, such as + an unsupported channel family. + \retval #OP_EINVAL The stream was only partially open. + \retval #OP_ENOTFORMAT An unseekable stream encountered a new link that + that did not have any logical Opus streams in it. + \retval #OP_EBADHEADER An unseekable stream encountered a new link with a + required header packet that was not properly + formatted, contained illegal values, or was + missing altogether. + \retval #OP_EVERSION An unseekable stream encountered a new link with + an ID header that contained an unrecognized + version number. + \retval #OP_EBADPACKET Failed to properly decode the next packet. + \retval #OP_EBADLINK We failed to find data we had seen before. + \retval #OP_EBADTIMESTAMP An unseekable stream encountered a new link with + a starting timestamp that failed basic validity + checks.*/ +OP_WARN_UNUSED_RESULT int op_read_float_stereo(OggOpusFile *_of, + float *_pcm,int _buf_size) OP_ARG_NONNULL(1); + +/*@}*/ +/*@}*/ + +# if OP_GNUC_PREREQ(4,0) +# pragma GCC visibility pop +# endif + +# if defined(__cplusplus) +} +# endif + +#endif |