diff options
Diffstat (limited to 'drivers/opus/opus_defines.h')
| -rw-r--r-- | drivers/opus/opus_defines.h | 726 |
1 files changed, 726 insertions, 0 deletions
diff --git a/drivers/opus/opus_defines.h b/drivers/opus/opus_defines.h new file mode 100644 index 0000000000..265089f65e --- /dev/null +++ b/drivers/opus/opus_defines.h @@ -0,0 +1,726 @@ +/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited + Written by Jean-Marc Valin and Koen Vos */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + * @file opus_defines.h + * @brief Opus reference implementation constants + */ + +#ifndef OPUS_DEFINES_H +#define OPUS_DEFINES_H + +#include "opus_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @defgroup opus_errorcodes Error codes + * @{ + */ +/** No error @hideinitializer*/ +#define OPUS_OK 0 +/** One or more invalid/out of range arguments @hideinitializer*/ +#define OPUS_BAD_ARG -1 +/** The mode struct passed is invalid @hideinitializer*/ +#define OPUS_BUFFER_TOO_SMALL -2 +/** An internal error was detected @hideinitializer*/ +#define OPUS_INTERNAL_ERROR -3 +/** The compressed data passed is corrupted @hideinitializer*/ +#define OPUS_INVALID_PACKET -4 +/** Invalid/unsupported request number @hideinitializer*/ +#define OPUS_UNIMPLEMENTED -5 +/** An encoder or decoder structure is invalid or already freed @hideinitializer*/ +#define OPUS_INVALID_STATE -6 +/** Memory allocation has failed @hideinitializer*/ +#define OPUS_ALLOC_FAIL -7 +/**@}*/ + +/** @cond OPUS_INTERNAL_DOC */ +/**Export control for opus functions */ + +#ifndef OPUS_EXPORT +# if defined(WIN32) +# ifdef OPUS_BUILD +# define OPUS_EXPORT __declspec(dllexport) +# else +# define OPUS_EXPORT +# endif +# elif defined(__GNUC__) && defined(OPUS_BUILD) +# define OPUS_EXPORT __attribute__ ((visibility ("default"))) +# else +# define OPUS_EXPORT +# endif +#endif + +# if !defined(OPUS_GNUC_PREREQ) +# if defined(__GNUC__)&&defined(__GNUC_MINOR__) +# define OPUS_GNUC_PREREQ(_maj,_min) \ + ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min)) +# else +# define OPUS_GNUC_PREREQ(_maj,_min) 0 +# endif +# endif + +#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) ) +# if OPUS_GNUC_PREREQ(3,0) +# define OPUS_RESTRICT __restrict__ +# elif (defined(_MSC_VER) && _MSC_VER >= 1400) +# define OPUS_RESTRICT __restrict +# else +# define OPUS_RESTRICT +# endif +#else +# define OPUS_RESTRICT restrict +#endif + +#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) ) +# if OPUS_GNUC_PREREQ(2,7) +# define OPUS_INLINE __inline__ +# elif (defined(_MSC_VER)) +# define OPUS_INLINE __inline +# else +# define OPUS_INLINE +# endif +#else +# define OPUS_INLINE inline +#endif + +/**Warning attributes for opus functions + * NONNULL is not used in OPUS_BUILD to avoid the compiler optimizing out + * some paranoid null checks. */ +#if defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4) +# define OPUS_WARN_UNUSED_RESULT __attribute__ ((__warn_unused_result__)) +#else +# define OPUS_WARN_UNUSED_RESULT +#endif +#if !defined(OPUS_BUILD) && defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4) +# define OPUS_ARG_NONNULL(_x) __attribute__ ((__nonnull__(_x))) +#else +# define OPUS_ARG_NONNULL(_x) +#endif + +/** These are the actual Encoder CTL ID numbers. + * They should not be used directly by applications. + * In general, SETs should be even and GETs should be odd.*/ +#define OPUS_SET_APPLICATION_REQUEST 4000 +#define OPUS_GET_APPLICATION_REQUEST 4001 +#define OPUS_SET_BITRATE_REQUEST 4002 +#define OPUS_GET_BITRATE_REQUEST 4003 +#define OPUS_SET_MAX_BANDWIDTH_REQUEST 4004 +#define OPUS_GET_MAX_BANDWIDTH_REQUEST 4005 +#define OPUS_SET_VBR_REQUEST 4006 +#define OPUS_GET_VBR_REQUEST 4007 +#define OPUS_SET_BANDWIDTH_REQUEST 4008 +#define OPUS_GET_BANDWIDTH_REQUEST 4009 +#define OPUS_SET_COMPLEXITY_REQUEST 4010 +#define OPUS_GET_COMPLEXITY_REQUEST 4011 +#define OPUS_SET_INBAND_FEC_REQUEST 4012 +#define OPUS_GET_INBAND_FEC_REQUEST 4013 +#define OPUS_SET_PACKET_LOSS_PERC_REQUEST 4014 +#define OPUS_GET_PACKET_LOSS_PERC_REQUEST 4015 +#define OPUS_SET_DTX_REQUEST 4016 +#define OPUS_GET_DTX_REQUEST 4017 +#define OPUS_SET_VBR_CONSTRAINT_REQUEST 4020 +#define OPUS_GET_VBR_CONSTRAINT_REQUEST 4021 +#define OPUS_SET_FORCE_CHANNELS_REQUEST 4022 +#define OPUS_GET_FORCE_CHANNELS_REQUEST 4023 +#define OPUS_SET_SIGNAL_REQUEST 4024 +#define OPUS_GET_SIGNAL_REQUEST 4025 +#define OPUS_GET_LOOKAHEAD_REQUEST 4027 +/* #define OPUS_RESET_STATE 4028 */ +#define OPUS_GET_SAMPLE_RATE_REQUEST 4029 +#define OPUS_GET_FINAL_RANGE_REQUEST 4031 +#define OPUS_GET_PITCH_REQUEST 4033 +#define OPUS_SET_GAIN_REQUEST 4034 +#define OPUS_GET_GAIN_REQUEST 4045 /* Should have been 4035 */ +#define OPUS_SET_LSB_DEPTH_REQUEST 4036 +#define OPUS_GET_LSB_DEPTH_REQUEST 4037 +#define OPUS_GET_LAST_PACKET_DURATION_REQUEST 4039 +#define OPUS_SET_EXPERT_FRAME_DURATION_REQUEST 4040 +#define OPUS_GET_EXPERT_FRAME_DURATION_REQUEST 4041 +#define OPUS_SET_PREDICTION_DISABLED_REQUEST 4042 +#define OPUS_GET_PREDICTION_DISABLED_REQUEST 4043 + +/* Don't use 4045, it's already taken by OPUS_GET_GAIN_REQUEST */ + +/* Macros to trigger compilation errors when the wrong types are provided to a CTL */ +#define __opus_check_int(x) (((void)((x) == (opus_int32)0)), (opus_int32)(x)) +#define __opus_check_int_ptr(ptr) ((ptr) + ((ptr) - (opus_int32*)(ptr))) +#define __opus_check_uint_ptr(ptr) ((ptr) + ((ptr) - (opus_uint32*)(ptr))) +#define __opus_check_val16_ptr(ptr) ((ptr) + ((ptr) - (opus_val16*)(ptr))) +/** @endcond */ + +/** @defgroup opus_ctlvalues Pre-defined values for CTL interface + * @see opus_genericctls, opus_encoderctls + * @{ + */ +/* Values for the various encoder CTLs */ +#define OPUS_AUTO -1000 /**<Auto/default setting @hideinitializer*/ +#define OPUS_BITRATE_MAX -1 /**<Maximum bitrate @hideinitializer*/ + +/** Best for most VoIP/videoconference applications where listening quality and intelligibility matter most + * @hideinitializer */ +#define OPUS_APPLICATION_VOIP 2048 +/** Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input + * @hideinitializer */ +#define OPUS_APPLICATION_AUDIO 2049 +/** Only use when lowest-achievable latency is what matters most. Voice-optimized modes cannot be used. + * @hideinitializer */ +#define OPUS_APPLICATION_RESTRICTED_LOWDELAY 2051 + +#define OPUS_SIGNAL_VOICE 3001 /**< Signal being encoded is voice */ +#define OPUS_SIGNAL_MUSIC 3002 /**< Signal being encoded is music */ +#define OPUS_BANDWIDTH_NARROWBAND 1101 /**< 4 kHz bandpass @hideinitializer*/ +#define OPUS_BANDWIDTH_MEDIUMBAND 1102 /**< 6 kHz bandpass @hideinitializer*/ +#define OPUS_BANDWIDTH_WIDEBAND 1103 /**< 8 kHz bandpass @hideinitializer*/ +#define OPUS_BANDWIDTH_SUPERWIDEBAND 1104 /**<12 kHz bandpass @hideinitializer*/ +#define OPUS_BANDWIDTH_FULLBAND 1105 /**<20 kHz bandpass @hideinitializer*/ + +#define OPUS_FRAMESIZE_ARG 5000 /**< Select frame size from the argument (default) */ +#define OPUS_FRAMESIZE_2_5_MS 5001 /**< Use 2.5 ms frames */ +#define OPUS_FRAMESIZE_5_MS 5002 /**< Use 5 ms frames */ +#define OPUS_FRAMESIZE_10_MS 5003 /**< Use 10 ms frames */ +#define OPUS_FRAMESIZE_20_MS 5004 /**< Use 20 ms frames */ +#define OPUS_FRAMESIZE_40_MS 5005 /**< Use 40 ms frames */ +#define OPUS_FRAMESIZE_60_MS 5006 /**< Use 60 ms frames */ + +/**@}*/ + + +/** @defgroup opus_encoderctls Encoder related CTLs + * + * These are convenience macros for use with the \c opus_encode_ctl + * interface. They are used to generate the appropriate series of + * arguments for that call, passing the correct type, size and so + * on as expected for each particular request. + * + * Some usage examples: + * + * @code + * int ret; + * ret = opus_encoder_ctl(enc_ctx, OPUS_SET_BANDWIDTH(OPUS_AUTO)); + * if (ret != OPUS_OK) return ret; + * + * opus_int32 rate; + * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&rate)); + * + * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE); + * @endcode + * + * @see opus_genericctls, opus_encoder + * @{ + */ + +/** Configures the encoder's computational complexity. + * The supported range is 0-10 inclusive with 10 representing the highest complexity. + * @see OPUS_GET_COMPLEXITY + * @param[in] x <tt>opus_int32</tt>: Allowed values: 0-10, inclusive. + * + * @hideinitializer */ +#define OPUS_SET_COMPLEXITY(x) OPUS_SET_COMPLEXITY_REQUEST, __opus_check_int(x) +/** Gets the encoder's complexity configuration. + * @see OPUS_SET_COMPLEXITY + * @param[out] x <tt>opus_int32 *</tt>: Returns a value in the range 0-10, + * inclusive. + * @hideinitializer */ +#define OPUS_GET_COMPLEXITY(x) OPUS_GET_COMPLEXITY_REQUEST, __opus_check_int_ptr(x) + +/** Configures the bitrate in the encoder. + * Rates from 500 to 512000 bits per second are meaningful, as well as the + * special values #OPUS_AUTO and #OPUS_BITRATE_MAX. + * The value #OPUS_BITRATE_MAX can be used to cause the codec to use as much + * rate as it can, which is useful for controlling the rate by adjusting the + * output buffer size. + * @see OPUS_GET_BITRATE + * @param[in] x <tt>opus_int32</tt>: Bitrate in bits per second. The default + * is determined based on the number of + * channels and the input sampling rate. + * @hideinitializer */ +#define OPUS_SET_BITRATE(x) OPUS_SET_BITRATE_REQUEST, __opus_check_int(x) +/** Gets the encoder's bitrate configuration. + * @see OPUS_SET_BITRATE + * @param[out] x <tt>opus_int32 *</tt>: Returns the bitrate in bits per second. + * The default is determined based on the + * number of channels and the input + * sampling rate. + * @hideinitializer */ +#define OPUS_GET_BITRATE(x) OPUS_GET_BITRATE_REQUEST, __opus_check_int_ptr(x) + +/** Enables or disables variable bitrate (VBR) in the encoder. + * The configured bitrate may not be met exactly because frames must + * be an integer number of bytes in length. + * @warning Only the MDCT mode of Opus can provide hard CBR behavior. + * @see OPUS_GET_VBR + * @see OPUS_SET_VBR_CONSTRAINT + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Hard CBR. For LPC/hybrid modes at very low bit-rate, this can + * cause noticeable quality degradation.</dd> + * <dt>1</dt><dd>VBR (default). The exact type of VBR is controlled by + * #OPUS_SET_VBR_CONSTRAINT.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_VBR(x) OPUS_SET_VBR_REQUEST, __opus_check_int(x) +/** Determine if variable bitrate (VBR) is enabled in the encoder. + * @see OPUS_SET_VBR + * @see OPUS_GET_VBR_CONSTRAINT + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>Hard CBR.</dd> + * <dt>1</dt><dd>VBR (default). The exact type of VBR may be retrieved via + * #OPUS_GET_VBR_CONSTRAINT.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_VBR(x) OPUS_GET_VBR_REQUEST, __opus_check_int_ptr(x) + +/** Enables or disables constrained VBR in the encoder. + * This setting is ignored when the encoder is in CBR mode. + * @warning Only the MDCT mode of Opus currently heeds the constraint. + * Speech mode ignores it completely, hybrid mode may fail to obey it + * if the LPC layer uses more bitrate than the constraint would have + * permitted. + * @see OPUS_GET_VBR_CONSTRAINT + * @see OPUS_SET_VBR + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Unconstrained VBR.</dd> + * <dt>1</dt><dd>Constrained VBR (default). This creates a maximum of one + * frame of buffering delay assuming a transport with a + * serialization speed of the nominal bitrate.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_VBR_CONSTRAINT(x) OPUS_SET_VBR_CONSTRAINT_REQUEST, __opus_check_int(x) +/** Determine if constrained VBR is enabled in the encoder. + * @see OPUS_SET_VBR_CONSTRAINT + * @see OPUS_GET_VBR + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>Unconstrained VBR.</dd> + * <dt>1</dt><dd>Constrained VBR (default).</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_VBR_CONSTRAINT(x) OPUS_GET_VBR_CONSTRAINT_REQUEST, __opus_check_int_ptr(x) + +/** Configures mono/stereo forcing in the encoder. + * This can force the encoder to produce packets encoded as either mono or + * stereo, regardless of the format of the input audio. This is useful when + * the caller knows that the input signal is currently a mono source embedded + * in a stereo stream. + * @see OPUS_GET_FORCE_CHANNELS + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd> + * <dt>1</dt> <dd>Forced mono</dd> + * <dt>2</dt> <dd>Forced stereo</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_FORCE_CHANNELS(x) OPUS_SET_FORCE_CHANNELS_REQUEST, __opus_check_int(x) +/** Gets the encoder's forced channel configuration. + * @see OPUS_SET_FORCE_CHANNELS + * @param[out] x <tt>opus_int32 *</tt>: + * <dl> + * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd> + * <dt>1</dt> <dd>Forced mono</dd> + * <dt>2</dt> <dd>Forced stereo</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_FORCE_CHANNELS(x) OPUS_GET_FORCE_CHANNELS_REQUEST, __opus_check_int_ptr(x) + +/** Configures the maximum bandpass that the encoder will select automatically. + * Applications should normally use this instead of #OPUS_SET_BANDWIDTH + * (leaving that set to the default, #OPUS_AUTO). This allows the + * application to set an upper bound based on the type of input it is + * providing, but still gives the encoder the freedom to reduce the bandpass + * when the bitrate becomes too low, for better overall quality. + * @see OPUS_GET_MAX_BANDWIDTH + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd> + * <dt>OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd> + * <dt>OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd> + * <dt>OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd> + * <dt>OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband (default)</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_MAX_BANDWIDTH(x) OPUS_SET_MAX_BANDWIDTH_REQUEST, __opus_check_int(x) + +/** Gets the encoder's configured maximum allowed bandpass. + * @see OPUS_SET_MAX_BANDWIDTH + * @param[out] x <tt>opus_int32 *</tt>: Allowed values: + * <dl> + * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband (default)</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_MAX_BANDWIDTH(x) OPUS_GET_MAX_BANDWIDTH_REQUEST, __opus_check_int_ptr(x) + +/** Sets the encoder's bandpass to a specific value. + * This prevents the encoder from automatically selecting the bandpass based + * on the available bitrate. If an application knows the bandpass of the input + * audio it is providing, it should normally use #OPUS_SET_MAX_BANDWIDTH + * instead, which still gives the encoder the freedom to reduce the bandpass + * when the bitrate becomes too low, for better overall quality. + * @see OPUS_GET_BANDWIDTH + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>#OPUS_AUTO</dt> <dd>(default)</dd> + * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_BANDWIDTH(x) OPUS_SET_BANDWIDTH_REQUEST, __opus_check_int(x) + +/** Configures the type of signal being encoded. + * This is a hint which helps the encoder's mode selection. + * @see OPUS_GET_SIGNAL + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>#OPUS_AUTO</dt> <dd>(default)</dd> + * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd> + * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_SIGNAL(x) OPUS_SET_SIGNAL_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured signal type. + * @see OPUS_SET_SIGNAL + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>#OPUS_AUTO</dt> <dd>(default)</dd> + * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd> + * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_SIGNAL(x) OPUS_GET_SIGNAL_REQUEST, __opus_check_int_ptr(x) + + +/** Configures the encoder's intended application. + * The initial value is a mandatory argument to the encoder_create function. + * @see OPUS_GET_APPLICATION + * @param[in] x <tt>opus_int32</tt>: Returns one of the following values: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_APPLICATION(x) OPUS_SET_APPLICATION_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured application. + * @see OPUS_SET_APPLICATION + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_APPLICATION(x) OPUS_GET_APPLICATION_REQUEST, __opus_check_int_ptr(x) + +/** Gets the sampling rate the encoder or decoder was initialized with. + * This simply returns the <code>Fs</code> value passed to opus_encoder_init() + * or opus_decoder_init(). + * @param[out] x <tt>opus_int32 *</tt>: Sampling rate of encoder or decoder. + * @hideinitializer + */ +#define OPUS_GET_SAMPLE_RATE(x) OPUS_GET_SAMPLE_RATE_REQUEST, __opus_check_int_ptr(x) + +/** Gets the total samples of delay added by the entire codec. + * This can be queried by the encoder and then the provided number of samples can be + * skipped on from the start of the decoder's output to provide time aligned input + * and output. From the perspective of a decoding application the real data begins this many + * samples late. + * + * The decoder contribution to this delay is identical for all decoders, but the + * encoder portion of the delay may vary from implementation to implementation, + * version to version, or even depend on the encoder's initial configuration. + * Applications needing delay compensation should call this CTL rather than + * hard-coding a value. + * @param[out] x <tt>opus_int32 *</tt>: Number of lookahead samples + * @hideinitializer */ +#define OPUS_GET_LOOKAHEAD(x) OPUS_GET_LOOKAHEAD_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of inband forward error correction (FEC). + * @note This is only applicable to the LPC layer + * @see OPUS_GET_INBAND_FEC + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Disable inband FEC (default).</dd> + * <dt>1</dt><dd>Enable inband FEC.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_INBAND_FEC(x) OPUS_SET_INBAND_FEC_REQUEST, __opus_check_int(x) +/** Gets encoder's configured use of inband forward error correction. + * @see OPUS_SET_INBAND_FEC + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>Inband FEC disabled (default).</dd> + * <dt>1</dt><dd>Inband FEC enabled.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_INBAND_FEC(x) OPUS_GET_INBAND_FEC_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's expected packet loss percentage. + * Higher values with trigger progressively more loss resistant behavior in the encoder + * at the expense of quality at a given bitrate in the lossless case, but greater quality + * under loss. + * @see OPUS_GET_PACKET_LOSS_PERC + * @param[in] x <tt>opus_int32</tt>: Loss percentage in the range 0-100, inclusive (default: 0). + * @hideinitializer */ +#define OPUS_SET_PACKET_LOSS_PERC(x) OPUS_SET_PACKET_LOSS_PERC_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured packet loss percentage. + * @see OPUS_SET_PACKET_LOSS_PERC + * @param[out] x <tt>opus_int32 *</tt>: Returns the configured loss percentage + * in the range 0-100, inclusive (default: 0). + * @hideinitializer */ +#define OPUS_GET_PACKET_LOSS_PERC(x) OPUS_GET_PACKET_LOSS_PERC_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of discontinuous transmission (DTX). + * @note This is only applicable to the LPC layer + * @see OPUS_GET_DTX + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Disable DTX (default).</dd> + * <dt>1</dt><dd>Enabled DTX.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_DTX(x) OPUS_SET_DTX_REQUEST, __opus_check_int(x) +/** Gets encoder's configured use of discontinuous transmission. + * @see OPUS_SET_DTX + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>DTX disabled (default).</dd> + * <dt>1</dt><dd>DTX enabled.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_DTX(x) OPUS_GET_DTX_REQUEST, __opus_check_int_ptr(x) +/** Configures the depth of signal being encoded. + * This is a hint which helps the encoder identify silence and near-silence. + * @see OPUS_GET_LSB_DEPTH + * @param[in] x <tt>opus_int32</tt>: Input precision in bits, between 8 and 24 + * (default: 24). + * @hideinitializer */ +#define OPUS_SET_LSB_DEPTH(x) OPUS_SET_LSB_DEPTH_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured signal depth. + * @see OPUS_SET_LSB_DEPTH + * @param[out] x <tt>opus_int32 *</tt>: Input precision in bits, between 8 and + * 24 (default: 24). + * @hideinitializer */ +#define OPUS_GET_LSB_DEPTH(x) OPUS_GET_LSB_DEPTH_REQUEST, __opus_check_int_ptr(x) + +/** Gets the duration (in samples) of the last packet successfully decoded or concealed. + * @param[out] x <tt>opus_int32 *</tt>: Number of samples (at current sampling rate). + * @hideinitializer */ +#define OPUS_GET_LAST_PACKET_DURATION(x) OPUS_GET_LAST_PACKET_DURATION_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of variable duration frames. + * When variable duration is enabled, the encoder is free to use a shorter frame + * size than the one requested in the opus_encode*() call. + * It is then the user's responsibility + * to verify how much audio was encoded by checking the ToC byte of the encoded + * packet. The part of the audio that was not encoded needs to be resent to the + * encoder for the next call. Do not use this option unless you <b>really</b> + * know what you are doing. + * @see OPUS_GET_EXPERT_VARIABLE_DURATION + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd> + * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 2.5 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_VARIABLE</dt><dd>Optimize the frame size dynamically.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_EXPERT_FRAME_DURATION(x) OPUS_SET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured use of variable duration frames. + * @see OPUS_SET_EXPERT_VARIABLE_DURATION + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd> + * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 2.5 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_VARIABLE</dt><dd>Optimize the frame size dynamically.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_EXPERT_FRAME_DURATION(x) OPUS_GET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int_ptr(x) + +/** If set to 1, disables almost all use of prediction, making frames almost + completely independent. This reduces quality. (default : 0) + * @hideinitializer */ +#define OPUS_SET_PREDICTION_DISABLED(x) OPUS_SET_PREDICTION_DISABLED_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured prediction status. + * @hideinitializer */ +#define OPUS_GET_PREDICTION_DISABLED(x) OPUS_GET_PREDICTION_DISABLED_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_genericctls Generic CTLs + * + * These macros are used with the \c opus_decoder_ctl and + * \c opus_encoder_ctl calls to generate a particular + * request. + * + * When called on an \c OpusDecoder they apply to that + * particular decoder instance. When called on an + * \c OpusEncoder they apply to the corresponding setting + * on that encoder instance, if present. + * + * Some usage examples: + * + * @code + * int ret; + * opus_int32 pitch; + * ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch)); + * if (ret == OPUS_OK) return ret; + * + * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE); + * opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE); + * + * opus_int32 enc_bw, dec_bw; + * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw)); + * opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw)); + * if (enc_bw != dec_bw) { + * printf("packet bandwidth mismatch!\n"); + * } + * @endcode + * + * @see opus_encoder, opus_decoder_ctl, opus_encoder_ctl, opus_decoderctls, opus_encoderctls + * @{ + */ + +/** Resets the codec state to be equivalent to a freshly initialized state. + * This should be called when switching streams in order to prevent + * the back to back decoding from giving different results from + * one at a time decoding. + * @hideinitializer */ +#define OPUS_RESET_STATE 4028 + +/** Gets the final state of the codec's entropy coder. + * This is used for testing purposes, + * The encoder and decoder state should be identical after coding a payload + * (assuming no data corruption or software bugs) + * + * @param[out] x <tt>opus_uint32 *</tt>: Entropy coder state + * + * @hideinitializer */ +#define OPUS_GET_FINAL_RANGE(x) OPUS_GET_FINAL_RANGE_REQUEST, __opus_check_uint_ptr(x) + +/** Gets the pitch of the last decoded frame, if available. + * This can be used for any post-processing algorithm requiring the use of pitch, + * e.g. time stretching/shortening. If the last frame was not voiced, or if the + * pitch was not coded in the frame, then zero is returned. + * + * This CTL is only implemented for decoder instances. + * + * @param[out] x <tt>opus_int32 *</tt>: pitch period at 48 kHz (or 0 if not available) + * + * @hideinitializer */ +#define OPUS_GET_PITCH(x) OPUS_GET_PITCH_REQUEST, __opus_check_int_ptr(x) + +/** Gets the encoder's configured bandpass or the decoder's last bandpass. + * @see OPUS_SET_BANDWIDTH + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>#OPUS_AUTO</dt> <dd>(default)</dd> + * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_BANDWIDTH(x) OPUS_GET_BANDWIDTH_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_decoderctls Decoder related CTLs + * @see opus_genericctls, opus_encoderctls, opus_decoder + * @{ + */ + +/** Configures decoder gain adjustment. + * Scales the decoded output by a factor specified in Q8 dB units. + * This has a maximum range of -32768 to 32767 inclusive, and returns + * OPUS_BAD_ARG otherwise. The default is zero indicating no adjustment. + * This setting survives decoder reset. + * + * gain = pow(10, x/(20.0*256)) + * + * @param[in] x <tt>opus_int32</tt>: Amount to scale PCM signal by in Q8 dB units. + * @hideinitializer */ +#define OPUS_SET_GAIN(x) OPUS_SET_GAIN_REQUEST, __opus_check_int(x) +/** Gets the decoder's configured gain adjustment. @see OPUS_SET_GAIN + * + * @param[out] x <tt>opus_int32 *</tt>: Amount to scale PCM signal by in Q8 dB units. + * @hideinitializer */ +#define OPUS_GET_GAIN(x) OPUS_GET_GAIN_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_libinfo Opus library information functions + * @{ + */ + +/** Converts an opus error code into a human readable string. + * + * @param[in] error <tt>int</tt>: Error number + * @returns Error string + */ +OPUS_EXPORT const char *opus_strerror(int error); + +/** Gets the libopus version string. + * + * @returns Version string + */ +OPUS_EXPORT const char *opus_get_version_string(void); +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_DEFINES_H */ |