diff options
Diffstat (limited to 'drivers/opus/http.c')
| -rw-r--r-- | drivers/opus/http.c | 3427 |
1 files changed, 0 insertions, 3427 deletions
diff --git a/drivers/opus/http.c b/drivers/opus/http.c deleted file mode 100644 index 602d514f6e..0000000000 --- a/drivers/opus/http.c +++ /dev/null @@ -1,3427 +0,0 @@ -/******************************************************************** - * * - * THIS FILE IS PART OF THE libopusfile SOFTWARE CODEC SOURCE CODE. * - * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS * - * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE * - * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. * - * * - * THE libopusfile SOURCE CODE IS (C) COPYRIGHT 2012 * - * by the Xiph.Org Foundation and contributors http://www.xiph.org/ * - * * - ********************************************************************/ -#include "opus/opus_config.h" - -#include "opus/internal.h" -#include <ctype.h> -#include <errno.h> -#include <limits.h> -#include <string.h> - -/*RFCs referenced in this file: - RFC 761: DOD Standard Transmission Control Protocol - RFC 1535: A Security Problem and Proposed Correction With Widely Deployed DNS - Software - RFC 1738: Uniform Resource Locators (URL) - RFC 1945: Hypertext Transfer Protocol -- HTTP/1.0 - RFC 2068: Hypertext Transfer Protocol -- HTTP/1.1 - RFC 2145: Use and Interpretation of HTTP Version Numbers - RFC 2246: The TLS Protocol Version 1.0 - RFC 2459: Internet X.509 Public Key Infrastructure Certificate and - Certificate Revocation List (CRL) Profile - RFC 2616: Hypertext Transfer Protocol -- HTTP/1.1 - RFC 2617: HTTP Authentication: Basic and Digest Access Authentication - RFC 2817: Upgrading to TLS Within HTTP/1.1 - RFC 2818: HTTP Over TLS - RFC 3492: Punycode: A Bootstring encoding of Unicode for Internationalized - Domain Names in Applications (IDNA) - RFC 3986: Uniform Resource Identifier (URI): Generic Syntax - RFC 3987: Internationalized Resource Identifiers (IRIs) - RFC 4343: Domain Name System (DNS) Case Insensitivity Clarification - RFC 5894: Internationalized Domain Names for Applications (IDNA): - Background, Explanation, and Rationale - RFC 6066: Transport Layer Security (TLS) Extensions: Extension Definitions - RFC 6125: Representation and Verification of Domain-Based Application Service - Identity within Internet Public Key Infrastructure Using X.509 (PKIX) - Certificates in the Context of Transport Layer Security (TLS) - RFC 6555: Happy Eyeballs: Success with Dual-Stack Hosts*/ - -typedef struct OpusParsedURL OpusParsedURL; -typedef struct OpusStringBuf OpusStringBuf; -typedef struct OpusHTTPConn OpusHTTPConn; -typedef struct OpusHTTPStream OpusHTTPStream; - -static char *op_string_range_dup(const char *_start,const char *_end){ - size_t len; - char *ret; - OP_ASSERT(_start<=_end); - len=_end-_start; - /*This is to help avoid overflow elsewhere, later.*/ - if(OP_UNLIKELY(len>=INT_MAX))return NULL; - ret=(char *)_ogg_malloc(sizeof(*ret)*(len+1)); - if(OP_LIKELY(ret!=NULL)){ - ret=(char *)memcpy(ret,_start,sizeof(*ret)*(len)); - ret[len]='\0'; - } - return ret; -} - -static char *op_string_dup(const char *_s){ - return op_string_range_dup(_s,_s+strlen(_s)); -} - -static char *op_string_tolower(char *_s){ - int i; - for(i=0;_s[i]!='\0';i++){ - int c; - c=_s[i]; - if(c>='A'&&c<='Z')c+='a'-'A'; - _s[i]=(char)c; - } - return _s; -} - -/*URI character classes (from RFC 3986).*/ -#define OP_URL_ALPHA \ - "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" -#define OP_URL_DIGIT "0123456789" -#define OP_URL_HEXDIGIT "0123456789ABCDEFabcdef" -/*Not a character class, but the characters allowed in <scheme>.*/ -#define OP_URL_SCHEME OP_URL_ALPHA OP_URL_DIGIT "+-." -#define OP_URL_GEN_DELIMS "#/:?@[]" -#define OP_URL_SUB_DELIMS "!$&'()*+,;=" -#define OP_URL_RESERVED OP_URL_GEN_DELIMS OP_URL_SUB_DELIMS -#define OP_URL_UNRESERVED OP_URL_ALPHA OP_URL_DIGIT "-._~" -/*Not a character class, but the characters allowed in <pct-encoded>.*/ -#define OP_URL_PCT_ENCODED "%" -/*Not a character class or production rule, but for convenience.*/ -#define OP_URL_PCHAR_BASE \ - OP_URL_UNRESERVED OP_URL_PCT_ENCODED OP_URL_SUB_DELIMS -#define OP_URL_PCHAR OP_URL_PCHAR_BASE ":@" -/*Not a character class, but the characters allowed in <userinfo> and - <IP-literal>.*/ -#define OP_URL_PCHAR_NA OP_URL_PCHAR_BASE ":" -/*Not a character class, but the characters allowed in <segment-nz-nc>.*/ -#define OP_URL_PCHAR_NC OP_URL_PCHAR_BASE "@" -/*Not a character clsss, but the characters allowed in <path>.*/ -#define OP_URL_PATH OP_URL_PCHAR "/" -/*Not a character class, but the characters allowed in <query> / <fragment>.*/ -#define OP_URL_QUERY_FRAG OP_URL_PCHAR "/?" - -/*Check the <% HEXDIG HEXDIG> escapes of a URL for validity. - Return: 0 if valid, or a negative value on failure.*/ -static int op_validate_url_escapes(const char *_s){ - int i; - for(i=0;_s[i];i++){ - if(_s[i]=='%'){ - if(OP_UNLIKELY(!isxdigit(_s[i+1])) - ||OP_UNLIKELY(!isxdigit(_s[i+2])) - /*RFC 3986 says %00 "should be rejected if the application is not - expecting to receive raw data within a component."*/ - ||OP_UNLIKELY(_s[i+1]=='0'&&_s[i+2]=='0')){ - return OP_FALSE; - } - i+=2; - } - } - return 0; -} - -/*Convert a hex digit to its actual value. - _c: The hex digit to convert. - Presumed to be valid ('0'...'9', 'A'...'F', or 'a'...'f'). - Return: The value of the digit, in the range [0,15].*/ -static int op_hex_value(int _c){ - return _c>='a'?_c-'a'+10:_c>='A'?_c-'A'+10:_c-'0'; -} - -/*Unescape all the <% HEXDIG HEXDIG> sequences in a string in-place. - This does no validity checking.*/ -static char *op_unescape_url_component(char *_s){ - int i; - int j; - for(i=j=0;_s[i];i++,j++){ - if(_s[i]=='%'){ - _s[i]=(char)(op_hex_value(_s[i+1])<<4|op_hex_value(_s[i+2])); - i+=2; - } - } - return _s; -} - -/*Parse a file: URL. - This code is not meant to be fast: strspn() with large sets is likely to be - slow, but it is very convenient. - It is meant to be RFC 1738-compliant (as updated by RFC 3986).*/ -static const char *op_parse_file_url(const char *_src){ - const char *scheme_end; - const char *path; - const char *path_end; - scheme_end=_src+strspn(_src,OP_URL_SCHEME); - if(OP_UNLIKELY(*scheme_end!=':') - ||scheme_end-_src!=4||op_strncasecmp(_src,"file",4)!=0){ - /*Unsupported protocol.*/ - return NULL; - } - /*Make sure all escape sequences are valid to simplify unescaping later.*/ - if(OP_UNLIKELY(op_validate_url_escapes(scheme_end+1)<0))return NULL; - if(scheme_end[1]=='/'&&scheme_end[2]=='/'){ - const char *host; - /*file: URLs can have a host! - Yeah, I was surprised, too, but that's what RFC 1738 says. - It also says, "The file URL scheme is unusual in that it does not specify - an Internet protocol or access method for such files; as such, its - utility in network protocols between hosts is limited," which is a mild - understatement.*/ - host=scheme_end+3; - /*The empty host is what we expect.*/ - if(OP_LIKELY(*host=='/'))path=host; - else{ - const char *host_end; - char host_buf[28]; - /*RFC 1738 says localhost "is interpreted as `the machine from which the - URL is being interpreted,'" so let's check for it.*/ - host_end=host+strspn(host,OP_URL_PCHAR_BASE); - /*No <port> allowed. - This also rejects IP-Literals.*/ - if(*host_end!='/')return NULL; - /*An escaped "localhost" can take at most 27 characters.*/ - if(OP_UNLIKELY(host_end-host>27))return NULL; - memcpy(host_buf,host,sizeof(*host_buf)*(host_end-host)); - host_buf[host_end-host]='\0'; - op_unescape_url_component(host_buf); - op_string_tolower(host_buf); - /*Some other host: give up.*/ - if(OP_UNLIKELY(strcmp(host_buf,"localhost")!=0))return NULL; - path=host_end; - } - } - else path=scheme_end+1; - path_end=path+strspn(path,OP_URL_PATH); - /*This will reject a <query> or <fragment> component, too. - I don't know what to do with queries, but a temporal fragment would at - least make sense. - RFC 1738 pretty clearly defines a <searchpart> that's equivalent to the - RFC 3986 <query> component for other schemes, but not the file: scheme, - so I'm going to just reject it.*/ - if(*path_end!='\0')return NULL; - return path; -} - -#if defined(OP_ENABLE_HTTP) -# if defined(_WIN32) -# include <winsock2.h> -# include <ws2tcpip.h> -# include <openssl/ssl.h> -# include "opus/winerrno.h" - -typedef SOCKET op_sock; - -# define OP_INVALID_SOCKET (INVALID_SOCKET) - -/*Vista and later support WSAPoll(), but we don't want to rely on that. - Instead we re-implement it badly using select(). - Unfortunately, they define a conflicting struct pollfd, so we only define our - own if it looks like that one has not already been defined.*/ -# if !defined(POLLIN) -/*Equivalent to POLLIN.*/ -# define POLLRDNORM (0x0100) -/*Priority band data can be read.*/ -# define POLLRDBAND (0x0200) -/*There is data to read.*/ -# define POLLIN (POLLRDNORM|POLLRDBAND) -/* There is urgent data to read.*/ -# define POLLPRI (0x0400) -/*Equivalent to POLLOUT.*/ -# define POLLWRNORM (0x0010) -/*Writing now will not block.*/ -# define POLLOUT (POLLWRNORM) -/*Priority data may be written.*/ -# define POLLWRBAND (0x0020) -/*Error condition (output only).*/ -# define POLLERR (0x0001) -/*Hang up (output only).*/ -# define POLLHUP (0x0002) -/*Invalid request: fd not open (output only).*/ -# define POLLNVAL (0x0004) - -struct pollfd{ - /*File descriptor.*/ - op_sock fd; - /*Requested events.*/ - short events; - /*Returned events.*/ - short revents; -}; -# endif - -/*But Winsock never defines nfds_t (it's simply hard-coded to ULONG).*/ -typedef unsigned long nfds_t; - -/*The usage of FD_SET() below is O(N^2). - This is okay because select() is limited to 64 sockets in Winsock, anyway. - In practice, we only ever call it with one or two sockets.*/ -static int op_poll_win32(struct pollfd *_fds,nfds_t _nfds,int _timeout){ - struct timeval tv; - fd_set ifds; - fd_set ofds; - fd_set efds; - nfds_t i; - int ret; - FD_ZERO(&ifds); - FD_ZERO(&ofds); - FD_ZERO(&efds); - for(i=0;i<_nfds;i++){ - _fds[i].revents=0; - if(_fds[i].events&POLLIN)FD_SET(_fds[i].fd,&ifds); - if(_fds[i].events&POLLOUT)FD_SET(_fds[i].fd,&ofds); - FD_SET(_fds[i].fd,&efds); - } - if(_timeout>=0){ - tv.tv_sec=_timeout/1000; - tv.tv_usec=(_timeout%1000)*1000; - } - ret=select(-1,&ifds,&ofds,&efds,_timeout<0?NULL:&tv); - if(ret>0){ - for(i=0;i<_nfds;i++){ - if(FD_ISSET(_fds[i].fd,&ifds))_fds[i].revents|=POLLIN; - if(FD_ISSET(_fds[i].fd,&ofds))_fds[i].revents|=POLLOUT; - /*This isn't correct: there are several different things that might have - happened to a fd in efds, but I don't know a good way to distinguish - them without more context from the caller. - It's okay, because we don't actually check any of these bits, we just - need _some_ bit set.*/ - if(FD_ISSET(_fds[i].fd,&efds))_fds[i].revents|=POLLHUP; - } - } - return ret; -} - -/*We define op_errno() to make it clear that it's not an l-value like normal - errno is.*/ -# define op_errno() (WSAGetLastError()?WSAGetLastError()-WSABASEERR:0) -# define op_reset_errno() (WSASetLastError(0)) - -/*The remaining functions don't get an op_ prefix even though they only - operate on sockets, because we don't use non-socket I/O here, and this - minimizes the changes needed to deal with Winsock.*/ -# define close(_fd) closesocket(_fd) -/*This relies on sizeof(u_long)==sizeof(int), which is always true on both - Win32 and Win64.*/ -# define ioctl(_fd,_req,_arg) ioctlsocket(_fd,_req,(u_long *)(_arg)) -# define getsockopt(_fd,_level,_name,_val,_len) \ - getsockopt(_fd,_level,_name,(char *)(_val),_len) -# define setsockopt(_fd,_level,_name,_val,_len) \ - setsockopt(_fd,_level,_name,(const char *)(_val),_len) -# define poll(_fds,_nfds,_timeout) op_poll_win32(_fds,_nfds,_timeout) - -# if defined(_MSC_VER) -typedef ptrdiff_t ssize_t; -# endif - -/*Load certificates from the built-in certificate store.*/ -int SSL_CTX_set_default_verify_paths_win32(SSL_CTX *_ssl_ctx); -# define SSL_CTX_set_default_verify_paths \ - SSL_CTX_set_default_verify_paths_win32 - -# else -/*Normal Berkeley sockets.*/ -# include <sys/ioctl.h> -# include <sys/types.h> -# include <sys/socket.h> -# include <arpa/inet.h> -# include <netinet/in.h> -# include <netinet/tcp.h> -# include <fcntl.h> -# include <netdb.h> -# include <poll.h> -# include <unistd.h> -# include <openssl/ssl.h> - -typedef int op_sock; - -# define OP_INVALID_SOCKET (-1) - -# define op_errno() (errno) -# define op_reset_errno() (errno=0) - -# endif -# include <sys/timeb.h> -# include <openssl/x509v3.h> - -/*The maximum number of simultaneous connections. - RFC 2616 says this SHOULD NOT be more than 2, but everyone on the modern web - ignores that (e.g., IE 8 bumped theirs up from 2 to 6, Firefox uses 15). - If it makes you feel better, we'll only ever actively read from one of these - at a time. - The others are kept around mainly to avoid slow-starting a new connection - when seeking, and time out rapidly.*/ -# define OP_NCONNS_MAX (4) - -/*The amount of time before we attempt to re-resolve the host. - This is 10 minutes, as recommended in RFC 6555 for expiring cached connection - results for dual-stack hosts.*/ -# define OP_RESOLVE_CACHE_TIMEOUT_MS (10*60*(opus_int32)1000) - -/*The number of redirections at which we give up. - The value here is the current default in Firefox. - RFC 2068 mandated a maximum of 5, but RFC 2616 relaxed that to "a client - SHOULD detect infinite redirection loops." - Fortunately, 20 is less than infinity.*/ -# define OP_REDIRECT_LIMIT (20) - -/*The initial size of the buffer used to read a response message (before the - body).*/ -# define OP_RESPONSE_SIZE_MIN (510) -/*The maximum size of a response message (before the body). - Responses larger than this will be discarded. - I've seen a real server return 20 kB of data for a 302 Found response. - Increasing this beyond 32kB will cause problems on platforms with a 16-bit - int.*/ -# define OP_RESPONSE_SIZE_MAX (32766) - -/*The number of milliseconds we will allow a connection to sit idle before we - refuse to resurrect it. - Apache as of 2.2 has reduced its default timeout to 5 seconds (from 15), so - that's what we'll use here.*/ -# define OP_CONNECTION_IDLE_TIMEOUT_MS (5*1000) - -/*The number of milliseconds we will wait to send or receive data before giving - up.*/ -# define OP_POLL_TIMEOUT_MS (30*1000) - -/*We will always attempt to read ahead at least this much in preference to - opening a new connection.*/ -# define OP_READAHEAD_THRESH_MIN (32*(opus_int32)1024) - -/*The amount of data to request after a seek. - This is a trade-off between read throughput after a seek vs. the the ability - to quickly perform another seek with the same connection.*/ -# define OP_PIPELINE_CHUNK_SIZE (32*(opus_int32)1024) -/*Subsequent chunks are requested with larger and larger sizes until they pass - this threshold, after which we just ask for the rest of the resource.*/ -# define OP_PIPELINE_CHUNK_SIZE_MAX (1024*(opus_int32)1024) -/*This is the maximum number of requests we'll make with a single connection. - Many servers will simply disconnect after we attempt some number of requests, - possibly without sending a Connection: close header, meaning we won't - discover it until we try to read beyond the end of the current chunk. - We can reconnect when that happens, but this is slow. - Instead, we impose a limit ourselves (set to the default for Apache - installations and thus likely the most common value in use).*/ -# define OP_PIPELINE_MAX_REQUESTS (100) -/*This should be the number of requests, starting from a chunk size of - OP_PIPELINE_CHUNK_SIZE and doubling each time, until we exceed - OP_PIPELINE_CHUNK_SIZE_MAX and just request the rest of the file. - We won't reuse a connection when seeking unless it has at least this many - requests left, to reduce the chances we'll have to open a new connection - while reading forward afterwards.*/ -# define OP_PIPELINE_MIN_REQUESTS (7) - -/*Is this an https URL? - For now we can simply check the last letter of the scheme.*/ -# define OP_URL_IS_SSL(_url) ((_url)->scheme[4]=='s') - -/*Does this URL use the default port for its scheme?*/ -# define OP_URL_IS_DEFAULT_PORT(_url) \ - (!OP_URL_IS_SSL(_url)&&(_url)->port==80 \ - ||OP_URL_IS_SSL(_url)&&(_url)->port==443) - -struct OpusParsedURL{ - /*Either "http" or "https".*/ - char *scheme; - /*The user name from the <userinfo> component, or NULL.*/ - char *user; - /*The password from the <userinfo> component, or NULL.*/ - char *pass; - /*The <host> component. - This may not be NULL.*/ - char *host; - /*The <path> and <query> components. - This may not be NULL.*/ - char *path; - /*The <port> component. - This is set to the default port if the URL did not contain one.*/ - unsigned port; -}; - -/*Parse a URL. - This code is not meant to be fast: strspn() with large sets is likely to be - slow, but it is very convenient. - It is meant to be RFC 3986-compliant. - We currently do not support IRIs (Internationalized Resource Identifiers, - RFC 3987). - Callers should translate them to URIs first.*/ -static int op_parse_url_impl(OpusParsedURL *_dst,const char *_src){ - const char *scheme_end; - const char *authority; - const char *userinfo_end; - const char *user; - const char *user_end; - const char *pass; - const char *hostport; - const char *hostport_end; - const char *host_end; - const char *port; - opus_int32 port_num; - const char *port_end; - const char *path; - const char *path_end; - const char *uri_end; - scheme_end=_src+strspn(_src,OP_URL_SCHEME); - if(OP_UNLIKELY(*scheme_end!=':') - ||OP_UNLIKELY(scheme_end-_src<4)||OP_UNLIKELY(scheme_end-_src>5) - ||OP_UNLIKELY(op_strncasecmp(_src,"https",scheme_end-_src)!=0)){ - /*Unsupported protocol.*/ - return OP_EIMPL; - } - if(OP_UNLIKELY(scheme_end[1]!='/')||OP_UNLIKELY(scheme_end[2]!='/')){ - /*We require an <authority> component.*/ - return OP_EINVAL; - } - authority=scheme_end+3; - /*Make sure all escape sequences are valid to simplify unescaping later.*/ - if(OP_UNLIKELY(op_validate_url_escapes(authority)<0))return OP_EINVAL; - /*Look for a <userinfo> component.*/ - userinfo_end=authority+strspn(authority,OP_URL_PCHAR_NA); - if(*userinfo_end=='@'){ - /*Found one.*/ - user=authority; - /*Look for a password (yes, clear-text passwords are deprecated, I know, - but what else are people supposed to use? use SSL if you care).*/ - user_end=authority+strspn(authority,OP_URL_PCHAR_BASE); - if(*user_end==':')pass=user_end+1; - else pass=NULL; - hostport=userinfo_end+1; - } - else{ - /*We shouldn't have to initialize user_end, but gcc is too dumb to figure - out that user!=NULL below means we didn't take this else branch.*/ - user=user_end=NULL; - pass=NULL; - hostport=authority; - } - /*Try to figure out where the <host> component ends.*/ - if(hostport[0]=='['){ - hostport++; - /*We have an <IP-literal>, which can contain colons.*/ - hostport_end=host_end=hostport+strspn(hostport,OP_URL_PCHAR_NA); - if(OP_UNLIKELY(*hostport_end++!=']'))return OP_EINVAL; - } - /*Currently we don't support IDNA (RFC 5894), because I don't want to deal - with the policy about which domains should not be internationalized to - avoid confusing similarities. - Give this API Punycode (RFC 3492) domain names instead.*/ - else hostport_end=host_end=hostport+strspn(hostport,OP_URL_PCHAR_BASE); - /*TODO: Validate host.*/ - /*Is there a port number?*/ - port_num=-1; - if(*hostport_end==':'){ - int i; - port=hostport_end+1; - port_end=port+strspn(port,OP_URL_DIGIT); - path=port_end; - /*Not part of RFC 3986, but require port numbers in the range 0...65535.*/ - if(OP_LIKELY(port_end-port>0)){ - while(*port=='0')port++; - if(OP_UNLIKELY(port_end-port>5))return OP_EINVAL; - port_num=0; - for(i=0;i<port_end-port;i++)port_num=port_num*10+port[i]-'0'; - if(OP_UNLIKELY(port_num>65535))return OP_EINVAL; - } - } - else path=hostport_end; - path_end=path+strspn(path,OP_URL_PATH); - /*If the path is not empty, it must begin with a '/'.*/ - if(OP_LIKELY(path_end>path)&&OP_UNLIKELY(path[0]!='/'))return OP_EINVAL; - /*Consume the <query> component, if any (right now we don't split this out - from the <path> component).*/ - if(*path_end=='?')path_end=path_end+strspn(path_end,OP_URL_QUERY_FRAG); - /*Discard the <fragment> component, if any. - This doesn't get sent to the server. - Some day we should add support for Media Fragment URIs - <http://www.w3.org/TR/media-frags/>.*/ - if(*path_end=='#')uri_end=path_end+1+strspn(path_end+1,OP_URL_QUERY_FRAG); - else uri_end=path_end; - /*If there's anything left, this was not a valid URL.*/ - if(OP_UNLIKELY(*uri_end!='\0'))return OP_EINVAL; - _dst->scheme=op_string_range_dup(_src,scheme_end); - if(OP_UNLIKELY(_dst->scheme==NULL))return OP_EFAULT; - op_string_tolower(_dst->scheme); - if(user!=NULL){ - _dst->user=op_string_range_dup(user,user_end); - if(OP_UNLIKELY(_dst->user==NULL))return OP_EFAULT; - op_unescape_url_component(_dst->user); - /*Unescaping might have created a ':' in the username. - That's not allowed by RFC 2617's Basic Authentication Scheme.*/ - if(OP_UNLIKELY(strchr(_dst->user,':')!=NULL))return OP_EINVAL; - } - else _dst->user=NULL; - if(pass!=NULL){ - _dst->pass=op_string_range_dup(pass,userinfo_end); - if(OP_UNLIKELY(_dst->pass==NULL))return OP_EFAULT; - op_unescape_url_component(_dst->pass); - } - else _dst->pass=NULL; - _dst->host=op_string_range_dup(hostport,host_end); - if(OP_UNLIKELY(_dst->host==NULL))return OP_EFAULT; - if(port_num<0){ - if(_src[4]=='s')port_num=443; - else port_num=80; - } - _dst->port=(unsigned)port_num; - /*RFC 2616 says an empty <abs-path> component is equivalent to "/", and we - MUST use the latter in the Request-URI. - Reserve space for the slash here.*/ - if(path==path_end||path[0]=='?')path--; - _dst->path=op_string_range_dup(path,path_end); - if(OP_UNLIKELY(_dst->path==NULL))return OP_EFAULT; - /*And force-set it here.*/ - _dst->path[0]='/'; - return 0; -} - -static void op_parsed_url_init(OpusParsedURL *_url){ - memset(_url,0,sizeof(*_url)); -} - -static void op_parsed_url_clear(OpusParsedURL *_url){ - _ogg_free(_url->scheme); - _ogg_free(_url->user); - _ogg_free(_url->pass); - _ogg_free(_url->host); - _ogg_free(_url->path); -} - -static int op_parse_url(OpusParsedURL *_dst,const char *_src){ - OpusParsedURL url; - int ret; - op_parsed_url_init(&url); - ret=op_parse_url_impl(&url,_src); - if(OP_UNLIKELY(ret<0))op_parsed_url_clear(&url); - else *_dst=*&url; - return ret; -} - -/*A buffer to hold growing strings. - The main purpose of this is to consolidate allocation checks and simplify - cleanup on a failed allocation.*/ -struct OpusStringBuf{ - char *buf; - int nbuf; - int cbuf; -}; - -static void op_sb_init(OpusStringBuf *_sb){ - _sb->buf=NULL; - _sb->nbuf=0; - _sb->cbuf=0; -} - -static void op_sb_clear(OpusStringBuf *_sb){ - _ogg_free(_sb->buf); -} - -/*Make sure we have room for at least _capacity characters (plus 1 more for the - terminating NUL).*/ -static int op_sb_ensure_capacity(OpusStringBuf *_sb,int _capacity){ - char *buf; - int cbuf; - buf=_sb->buf; - cbuf=_sb->cbuf; - if(_capacity>=cbuf-1){ - if(OP_UNLIKELY(cbuf>INT_MAX-1>>1))return OP_EFAULT; - if(OP_UNLIKELY(_capacity>=INT_MAX-1))return OP_EFAULT; - cbuf=OP_MAX(2*cbuf+1,_capacity+1); - buf=_ogg_realloc(buf,sizeof(*buf)*cbuf); - if(OP_UNLIKELY(buf==NULL))return OP_EFAULT; - _sb->buf=buf; - _sb->cbuf=cbuf; - } - return 0; -} - -/*Increase the capacity of the buffer, but not to more than _max_size - characters (plus 1 more for the terminating NUL).*/ -static int op_sb_grow(OpusStringBuf *_sb,int _max_size){ - char *buf; - int cbuf; - buf=_sb->buf; - cbuf=_sb->cbuf; - OP_ASSERT(_max_size<=INT_MAX-1); - cbuf=cbuf<=_max_size-1>>1?2*cbuf+1:_max_size+1; - buf=_ogg_realloc(buf,sizeof(*buf)*cbuf); - if(OP_UNLIKELY(buf==NULL))return OP_EFAULT; - _sb->buf=buf; - _sb->cbuf=cbuf; - return 0; -} - -static int op_sb_append(OpusStringBuf *_sb,const char *_s,int _len){ - char *buf; - int nbuf; - int ret; - nbuf=_sb->nbuf; - if(OP_UNLIKELY(nbuf>INT_MAX-_len))return OP_EFAULT; - ret=op_sb_ensure_capacity(_sb,nbuf+_len); - if(OP_UNLIKELY(ret<0))return ret; - buf=_sb->buf; - memcpy(buf+nbuf,_s,sizeof(*buf)*_len); - nbuf+=_len; - buf[nbuf]='\0'; - _sb->nbuf=nbuf; - return 0; -} - -static int op_sb_append_string(OpusStringBuf *_sb,const char *_s){ - return op_sb_append(_sb,_s,strlen(_s)); -} - -static int op_sb_append_port(OpusStringBuf *_sb,unsigned _port){ - char port_buf[7]; - OP_ASSERT(_port<=65535U); - sprintf(port_buf,":%u",_port); - return op_sb_append_string(_sb,port_buf); -} - -static int op_sb_append_nonnegative_int64(OpusStringBuf *_sb,opus_int64 _i){ - char digit; - int nbuf_start; - int ret; - OP_ASSERT(_i>=0); - nbuf_start=_sb->nbuf; - ret=0; - do{ - digit='0'+_i%10; - ret|=op_sb_append(_sb,&digit,1); - _i/=10; - } - while(_i>0); - if(OP_LIKELY(ret>=0)){ - char *buf; - int nbuf_end; - buf=_sb->buf; - nbuf_end=_sb->nbuf-1; - /*We've added the digits backwards. - Reverse them.*/ - while(nbuf_start<nbuf_end){ - digit=buf[nbuf_start]; - buf[nbuf_start]=buf[nbuf_end]; - buf[nbuf_end]=digit; - nbuf_start++; - nbuf_end--; - } - } - return ret; -} - -static struct addrinfo *op_resolve(const char *_host,unsigned _port){ - struct addrinfo *addrs; - struct addrinfo hints; - char service[6]; - memset(&hints,0,sizeof(hints)); - hints.ai_socktype=SOCK_STREAM; -#if defined(AI_NUMERICSERV) - hints.ai_flags=AI_NUMERICSERV; -#endif - OP_ASSERT(_port<=65535U); - sprintf(service,"%u",_port); - if(OP_LIKELY(!getaddrinfo(_host,service,&hints,&addrs)))return addrs; - return NULL; -} - -static int op_sock_set_nonblocking(op_sock _fd,int _nonblocking){ -#if !defined(_WIN32) - int flags; - flags=fcntl(_fd,F_GETFL); - if(OP_UNLIKELY(flags<0))return flags; - if(_nonblocking)flags|=O_NONBLOCK; - else flags&=~O_NONBLOCK; - return fcntl(_fd,F_SETFL,flags); -#else - return ioctl(_fd,FIONBIO,&_nonblocking); -#endif -} - -/*Disable/enable write coalescing if we can. - We always send whole requests at once and always parse the response headers - before sending another one, so normally write coalescing just causes added - delay.*/ -static void op_sock_set_tcp_nodelay(op_sock _fd,int _nodelay){ -# if defined(TCP_NODELAY)&&(defined(IPPROTO_TCP)||defined(SOL_TCP)) -# if defined(IPPROTO_TCP) -# define OP_SO_LEVEL IPPROTO_TCP -# else -# define OP_SO_LEVEL SOL_TCP -# endif - /*It doesn't really matter if this call fails, but it would be interesting - to hit a case where it does.*/ - OP_ALWAYS_TRUE(!setsockopt(_fd,OP_SO_LEVEL,TCP_NODELAY, - &_nodelay,sizeof(_nodelay))); -# endif -} - -#if defined(_WIN32) -static void op_init_winsock(){ - static LONG count; - static WSADATA wsadata; - if(InterlockedIncrement(&count)==1)WSAStartup(0x0202,&wsadata); -} -#endif - -/*A single physical connection to an HTTP server. - We may have several of these open at once.*/ -struct OpusHTTPConn{ - /*The current position indicator for this connection.*/ - opus_int64 pos; - /*The position where the current request will end, or -1 if we're reading - until EOF (an unseekable stream or the initial HTTP/1.0 request).*/ - opus_int64 end_pos; - /*The position where next request we've sent will start, or -1 if we haven't - sent the next request yet.*/ - opus_int64 next_pos; - /*The end of the next request or -1 if we requested the rest of the resource. - This is only set to a meaningful value if next_pos is not -1.*/ - opus_int64 next_end; - /*The SSL connection, if this is https.*/ - SSL *ssl_conn; - /*The next connection in either the LRU or free list.*/ - OpusHTTPConn *next; - /*The last time we blocked for reading from this connection.*/ - struct timeb read_time; - /*The number of bytes we've read since the last time we blocked.*/ - opus_int64 read_bytes; - /*The estimated throughput of this connection, in bytes/s.*/ - opus_int64 read_rate; - /*The socket we're reading from.*/ - op_sock fd; - /*The number of remaining requests we are allowed on this connection.*/ - int nrequests_left; - /*The chunk size to use for pipelining requests.*/ - opus_int32 chunk_size; -}; - -static void op_http_conn_init(OpusHTTPConn *_conn){ - _conn->next_pos=-1; - _conn->ssl_conn=NULL; - _conn->next=NULL; - _conn->fd=OP_INVALID_SOCKET; -} - -static void op_http_conn_clear(OpusHTTPConn *_conn){ - if(_conn->ssl_conn!=NULL)SSL_free(_conn->ssl_conn); - /*SSL frees the BIO for us.*/ - if(_conn->fd!=OP_INVALID_SOCKET)close(_conn->fd); -} - -/*The global stream state.*/ -struct OpusHTTPStream{ - /*The list of connections.*/ - OpusHTTPConn conns[OP_NCONNS_MAX]; - /*The context object used as a framework for TLS/SSL functions.*/ - SSL_CTX *ssl_ctx; - /*The cached session to reuse for future connections.*/ - SSL_SESSION *ssl_session; - /*The LRU list (ordered from MRU to LRU) of currently connected - connections.*/ - OpusHTTPConn *lru_head; - /*The free list.*/ - OpusHTTPConn *free_head; - /*The URL to connect to.*/ - OpusParsedURL url; - /*Information about the address we connected to.*/ - struct addrinfo addr_info; - /*The address we connected to.*/ - union{ - struct sockaddr s; - struct sockaddr_in v4; - struct sockaddr_in6 v6; - } addr; - /*The last time we re-resolved the host.*/ - struct timeb resolve_time; - /*A buffer used to build HTTP requests.*/ - OpusStringBuf request; - /*A buffer used to build proxy CONNECT requests.*/ - OpusStringBuf proxy_connect; - /*A buffer used to receive the response headers.*/ - OpusStringBuf response; - /*The Content-Length, if specified, or -1 otherwise. - This will always be specified for seekable streams.*/ - opus_int64 content_length; - /*The position indicator used when no connection is active.*/ - opus_int64 pos; - /*The host we actually connected to.*/ - char *connect_host; - /*The port we actually connected to.*/ - unsigned connect_port; - /*The connection we're currently reading from. - This can be -1 if no connection is active.*/ - int cur_conni; - /*Whether or not the server supports range requests.*/ - int seekable; - /*Whether or not the server supports HTTP/1.1 with persistent connections.*/ - int pipeline; - /*Whether or not we should skip certificate checks.*/ - int skip_certificate_check; - /*The offset of the tail of the request. - Only the offset in the Range: header appears after this, allowing us to - quickly edit the request to ask for a new range.*/ - int request_tail; - /*The estimated time required to open a new connection, in milliseconds.*/ - opus_int32 connect_rate; -}; - -static void op_http_stream_init(OpusHTTPStream *_stream){ - OpusHTTPConn **pnext; - int ci; - pnext=&_stream->free_head; - for(ci=0;ci<OP_NCONNS_MAX;ci++){ - op_http_conn_init(_stream->conns+ci); - *pnext=_stream->conns+ci; - pnext=&_stream->conns[ci].next; - } - _stream->ssl_ctx=NULL; - _stream->ssl_session=NULL; - _stream->lru_head=NULL; - op_parsed_url_init(&_stream->url); - op_sb_init(&_stream->request); - op_sb_init(&_stream->proxy_connect); - op_sb_init(&_stream->response); - _stream->connect_host=NULL; - _stream->seekable=0; -} - -/*Close the connection and move it to the free list. - _stream: The stream containing the free list. - _conn: The connection to close. - _penxt: The linked-list pointer currently pointing to this connection. - _gracefully: Whether or not to shut down cleanly.*/ -static void op_http_conn_close(OpusHTTPStream *_stream,OpusHTTPConn *_conn, - OpusHTTPConn **_pnext,int _gracefully){ - /*If we don't shut down gracefully, the server MUST NOT re-use our session - according to RFC 2246, because it can't tell the difference between an - abrupt close and a truncation attack. - So we shut down gracefully if we can. - However, we will not wait if this would block (it's not worth the savings - from session resumption to do so). - Clients (that's us) MAY resume a TLS session that ended with an incomplete - close, according to RFC 2818, so there's no reason to make sure the server - shut things down gracefully.*/ - if(_gracefully&&_conn->ssl_conn!=NULL)SSL_shutdown(_conn->ssl_conn); - op_http_conn_clear(_conn); - _conn->next_pos=-1; - _conn->ssl_conn=NULL; - _conn->fd=OP_INVALID_SOCKET; - OP_ASSERT(*_pnext==_conn); - *_pnext=_conn->next; - _conn->next=_stream->free_head; - _stream->free_head=_conn; -} - -static void op_http_stream_clear(OpusHTTPStream *_stream){ - while(_stream->lru_head!=NULL){ - op_http_conn_close(_stream,_stream->lru_head,&_stream->lru_head,0); - } - if(_stream->ssl_session!=NULL)SSL_SESSION_free(_stream->ssl_session); - if(_stream->ssl_ctx!=NULL)SSL_CTX_free(_stream->ssl_ctx); - op_sb_clear(&_stream->response); - op_sb_clear(&_stream->proxy_connect); - op_sb_clear(&_stream->request); - if(_stream->connect_host!=_stream->url.host)_ogg_free(_stream->connect_host); - op_parsed_url_clear(&_stream->url); -} - -static int op_http_conn_write_fully(OpusHTTPConn *_conn, - const char *_buf,int _buf_size){ - struct pollfd fd; - SSL *ssl_conn; - fd.fd=_conn->fd; - ssl_conn=_conn->ssl_conn; - while(_buf_size>0){ - int err; - if(ssl_conn!=NULL){ - int ret; - ret=SSL_write(ssl_conn,_buf,_buf_size); - if(ret>0){ - /*Wrote some data.*/ - _buf+=ret; - _buf_size-=ret; - continue; - } - /*Connection closed.*/ - else if(ret==0)return OP_FALSE; - err=SSL_get_error(ssl_conn,ret); - /*Yes, renegotiations can cause SSL_write() to block for reading.*/ - if(err==SSL_ERROR_WANT_READ)fd.events=POLLIN; - else if(err==SSL_ERROR_WANT_WRITE)fd.events=POLLOUT; - else return OP_FALSE; - } - else{ - ssize_t ret; - op_reset_errno(); - ret=send(fd.fd,_buf,_buf_size,0); - if(ret>0){ - _buf+=ret; - _buf_size-=ret; - continue; - } - err=op_errno(); - if(err!=EAGAIN&&err!=EWOULDBLOCK)return OP_FALSE; - fd.events=POLLOUT; - } - if(poll(&fd,1,OP_POLL_TIMEOUT_MS)<=0)return OP_FALSE; - } - return 0; -} - -static int op_http_conn_estimate_available(OpusHTTPConn *_conn){ - int available; - int ret; - ret=ioctl(_conn->fd,FIONREAD,&available); - if(ret<0)available=0; - /*This requires the SSL read_ahead flag to be unset to work. - We ignore partial records as well as the protocol overhead for any pending - bytes. - This means we might return somewhat less than can truly be read without - blocking (if there's a partial record). - This is okay, because we're using this value to estimate network transfer - time, and we _have_ already received those bytes. - We also might return slightly more (due to protocol overhead), but that's - small enough that it probably doesn't matter.*/ - if(_conn->ssl_conn!=NULL)available+=SSL_pending(_conn->ssl_conn); - return available; -} - -static opus_int32 op_time_diff_ms(const struct timeb *_end, - const struct timeb *_start){ - opus_int64 dtime; - dtime=_end->time-(opus_int64)_start->time; - OP_ASSERT(_end->millitm<1000); - OP_ASSERT(_start->millitm<1000); - if(OP_UNLIKELY(dtime>(OP_INT32_MAX-1000)/1000))return OP_INT32_MAX; - if(OP_UNLIKELY(dtime<(OP_INT32_MIN+1000)/1000))return OP_INT32_MIN; - return (opus_int32)dtime*1000+_end->millitm-_start->millitm; -} - -/*Update the read rate estimate for this connection.*/ -static void op_http_conn_read_rate_update(OpusHTTPConn *_conn){ - struct timeb read_time; - opus_int32 read_delta_ms; - opus_int64 read_delta_bytes; - opus_int64 read_rate; - read_delta_bytes=_conn->read_bytes; - if(read_delta_bytes<=0)return; - ftime(&read_time); - read_delta_ms=op_time_diff_ms(&read_time,&_conn->read_time); - read_rate=_conn->read_rate; - read_delta_ms=OP_MAX(read_delta_ms,1); - read_rate+=read_delta_bytes*1000/read_delta_ms-read_rate+4>>3; - *&_conn->read_time=*&read_time; - _conn->read_bytes=0; - _conn->read_rate=read_rate; -} - -/*Tries to read from the given connection. - [out] _buf: Returns the data read. - _buf_size: The size of the buffer. - _blocking: Whether or not to block until some data is retrieved. - Return: A positive number of bytes read on success. - 0: The read would block, or the connection was closed. - OP_EREAD: There was a fatal read error.*/ -static int op_http_conn_read(OpusHTTPConn *_conn, - char *_buf,int _buf_size,int _blocking){ - struct pollfd fd; - SSL *ssl_conn; - int nread; - int nread_unblocked; - fd.fd=_conn->fd; - ssl_conn=_conn->ssl_conn; - nread=nread_unblocked=0; - /*RFC 2818 says "client implementations MUST treat any premature closes as - errors and the data received as potentially truncated," so we make very - sure to report read errors upwards.*/ - do{ - int err; - if(ssl_conn!=NULL){ - int ret; - ret=SSL_read(ssl_conn,_buf+nread,_buf_size-nread); - OP_ASSERT(ret<=_buf_size-nread); - if(ret>0){ - /*Read some data. - Keep going to see if there's more.*/ - nread+=ret; - nread_unblocked+=ret; - continue; - } - /*If we already read some data, return it right now.*/ - if(nread>0)break; - err=SSL_get_error(ssl_conn,ret); - if(ret==0){ - /*Connection close. - Check for a clean shutdown to prevent truncation attacks. - This check always succeeds for SSLv2, as it has no "close notify" - message and thus can't verify an orderly shutdown.*/ - return err==SSL_ERROR_ZERO_RETURN?0:OP_EREAD; - } - if(err==SSL_ERROR_WANT_READ)fd.events=POLLIN; - /*Yes, renegotiations can cause SSL_read() to block for writing.*/ - else if(err==SSL_ERROR_WANT_WRITE)fd.events=POLLOUT; - /*Some other error.*/ - else return OP_EREAD; - } - else{ - ssize_t ret; - op_reset_errno(); - ret=recv(fd.fd,_buf+nread,_buf_size-nread,0); - OP_ASSERT(ret<=_buf_size-nread); - if(ret>0){ - /*Read some data. - Keep going to see if there's more.*/ - nread+=ret; - nread_unblocked+=ret; - continue; - } - /*If we already read some data or the connection was closed, return - right now.*/ - if(ret==0||nread>0)break; - err=op_errno(); - if(err!=EAGAIN&&err!=EWOULDBLOCK)return OP_EREAD; - fd.events=POLLIN; - } - _conn->read_bytes+=nread_unblocked; - op_http_conn_read_rate_update(_conn); - nread_unblocked=0; - if(!_blocking)break; - /*Need to wait to get any data at all.*/ - if(poll(&fd,1,OP_POLL_TIMEOUT_MS)<=0)return OP_EREAD; - } - while(nread<_buf_size); - _conn->read_bytes+=nread_unblocked; - return nread; -} - -/*Tries to look at the pending data for a connection without consuming it. - [out] _buf: Returns the data at which we're peeking. - _buf_size: The size of the buffer.*/ -static int op_http_conn_peek(OpusHTTPConn *_conn,char *_buf,int _buf_size){ - struct pollfd fd; - SSL *ssl_conn; - int ret; - fd.fd=_conn->fd; - ssl_conn=_conn->ssl_conn; - for(;;){ - int err; - if(ssl_conn!=NULL){ - ret=SSL_peek(ssl_conn,_buf,_buf_size); - /*Either saw some data or the connection was closed.*/ - if(ret>=0)return ret; - err=SSL_get_error(ssl_conn,ret); - if(err==SSL_ERROR_WANT_READ)fd.events=POLLIN; - /*Yes, renegotiations can cause SSL_peek() to block for writing.*/ - else if(err==SSL_ERROR_WANT_WRITE)fd.events=POLLOUT; - else return 0; - } - else{ - op_reset_errno(); - ret=(int)recv(fd.fd,_buf,_buf_size,MSG_PEEK); - /*Either saw some data or the connection was closed.*/ - if(ret>=0)return ret; - err=op_errno(); - if(err!=EAGAIN&&err!=EWOULDBLOCK)return 0; - fd.events=POLLIN; - } - /*Need to wait to get any data at all.*/ - if(poll(&fd,1,OP_POLL_TIMEOUT_MS)<=0)return 0; - } -} - -/*When parsing response headers, RFC 2616 mandates that all lines end in CR LF. - However, even in the year 2012, I have seen broken servers use just a LF. - This is the evil that Postel's advice from RFC 761 breeds.*/ - -/*Reads the entirety of a response to an HTTP request into the response buffer. - Actual parsing and validation is done later. - Return: The number of bytes in the response on success, OP_EREAD if the - connection was closed before reading any data, or another negative - value on any other error.*/ -static int op_http_conn_read_response(OpusHTTPConn *_conn, - OpusStringBuf *_response){ - int ret; - _response->nbuf=0; - ret=op_sb_ensure_capacity(_response,OP_RESPONSE_SIZE_MIN); - if(OP_UNLIKELY(ret<0))return ret; - for(;;){ - char *buf; - int size; - int capacity; - int read_limit; - int terminated; - size=_response->nbuf; - capacity=_response->cbuf-1; - if(OP_UNLIKELY(size>=capacity)){ - ret=op_sb_grow(_response,OP_RESPONSE_SIZE_MAX); - if(OP_UNLIKELY(ret<0))return ret; - capacity=_response->cbuf-1; - /*The response was too large. - This prevents a bad server from running us out of memory.*/ - if(OP_UNLIKELY(size>=capacity))return OP_EIMPL; - } - buf=_response->buf; - ret=op_http_conn_peek(_conn,buf+size,capacity-size); - if(OP_UNLIKELY(ret<=0))return size<=0?OP_EREAD:OP_FALSE; - /*We read some data.*/ - /*Make sure the starting characters are "HTTP". - Otherwise we could wind up waiting forever for a response from - something that is not an HTTP server.*/ - if(size<4&&op_strncasecmp(buf,"HTTP",OP_MIN(size+ret,4))!=0){ - return OP_FALSE; - } - /*How far can we read without passing the "\r\n\r\n" terminator?*/ - buf[size+ret]='\0'; - terminated=0; - for(read_limit=OP_MAX(size-3,0);read_limit<size+ret;read_limit++){ - /*We don't look for the leading '\r' thanks to broken servers.*/ - if(buf[read_limit]=='\n'){ - if(buf[read_limit+1]=='\r'&&OP_LIKELY(buf[read_limit+2]=='\n')){ - terminated=3; - break; - } - /*This case is for broken servers.*/ - else if(OP_UNLIKELY(buf[read_limit+1]=='\n')){ - terminated=2; - break; - } - } - } - read_limit+=terminated; - OP_ASSERT(size<=read_limit); - OP_ASSERT(read_limit<=size+ret); - /*Actually consume that data.*/ - ret=op_http_conn_read(_conn,buf+size,read_limit-size,1); - if(OP_UNLIKELY(ret<=0))return OP_FALSE; - size+=ret; - buf[size]='\0'; - _response->nbuf=size; - /*We found the terminator and read all the data up to and including it.*/ - if(terminated&&OP_LIKELY(size>=read_limit))return size; - } - return OP_EIMPL; -} - -# define OP_HTTP_DIGIT "0123456789" - -/*The Reason-Phrase is not allowed to contain control characters, except - horizontal tab (HT: \011).*/ -# define OP_HTTP_CREASON_PHRASE \ - "\001\002\003\004\005\006\007\010\012\013\014\015\016\017\020\021" \ - "\022\023\024\025\026\027\030\031\032\033\034\035\036\037\177" - -# define OP_HTTP_CTLS \ - "\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020" \ - "\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037\177" - -/*This also includes '\t', but we get that from OP_HTTP_CTLS.*/ -# define OP_HTTP_SEPARATORS " \"(),/:;<=>?@[\\]{}" - -/*TEXT can also include LWS, but that has structure, so we parse it - separately.*/ -# define OP_HTTP_CTOKEN OP_HTTP_CTLS OP_HTTP_SEPARATORS - -/*Return: The amount of linear white space (LWS) at the start of _s.*/ -static int op_http_lwsspn(const char *_s){ - int i; - for(i=0;;){ - if(_s[0]=='\r'&&_s[1]=='\n'&&(_s[2]=='\t'||_s[2]==' '))i+=3; - /*This case is for broken servers.*/ - else if(_s[0]=='\n'&&(_s[1]=='\t'||_s[1]==' '))i+=2; - else if(_s[i]=='\t'||_s[i]==' ')i++; - else return i; - } -} - -static char *op_http_parse_status_line(int *_v1_1_compat, - char **_status_code,char *_response){ - char *next; - char *status_code; - int v1_1_compat; - size_t d; - /*RFC 2616 Section 6.1 does not say that the tokens in the Status-Line cannot - be separated by optional LWS, but since it specifically calls out where - spaces are to be placed and that CR and LF are not allowed except at the - end, I am assuming this to be true.*/ - /*We already validated that this starts with "HTTP"*/ - OP_ASSERT(op_strncasecmp(_response,"HTTP",4)==0); - next=_response+4; - if(OP_UNLIKELY(*next++!='/'))return NULL; - d=strspn(next,OP_HTTP_DIGIT); - /*"Leading zeros MUST be ignored by recipients."*/ - while(*next=='0'){ - next++; - OP_ASSERT(d>0); - d--; - } - /*We only support version 1.x*/ - if(OP_UNLIKELY(d!=1)||OP_UNLIKELY(*next++!='1'))return NULL; - if(OP_UNLIKELY(*next++!='.'))return NULL; - d=strspn(next,OP_HTTP_DIGIT); - if(OP_UNLIKELY(d<=0))return NULL; - /*"Leading zeros MUST be ignored by recipients."*/ - while(*next=='0'){ - next++; - OP_ASSERT(d>0); - d--; - } - /*We don't need to parse the version number. - Any non-zero digit means it's greater than 1.*/ - v1_1_compat=d>0; - next+=d; - if(OP_UNLIKELY(*next++!=' '))return NULL; - status_code=next; - d=strspn(next,OP_HTTP_DIGIT); - if(OP_UNLIKELY(d!=3))return NULL; - next+=d; - /*The Reason-Phrase can be empty, but the space must be here.*/ - if(OP_UNLIKELY(*next++!=' '))return NULL; - next+=strcspn(next,OP_HTTP_CREASON_PHRASE); - /*We are not mandating this be present thanks to broken servers.*/ - if(OP_LIKELY(*next=='\r'))next++; - if(OP_UNLIKELY(*next++!='\n'))return NULL; - if(_v1_1_compat!=NULL)*_v1_1_compat=v1_1_compat; - *_status_code=status_code; - return next; -} - -/*Get the next response header. - [out] _header: The header token, NUL-terminated, with leading and trailing - whitespace stripped, and converted to lower case (to simplify - case-insensitive comparisons), or NULL if there are no more - response headers. - [out] _cdr: The remaining contents of the header, excluding the initial - colon (':') and the terminating CRLF ("\r\n"), - NUL-terminated, and with leading and trailing whitespace - stripped, or NULL if there are no more response headers. - [inout] _s: On input, this points to the start of the current line of the - response headers. - On output, it points to the start of the first line following - this header, or NULL if there are no more response headers. - Return: 0 on success, or a negative value on failure.*/ -static int op_http_get_next_header(char **_header,char **_cdr,char **_s){ - char *header; - char *header_end; - char *cdr; - char *cdr_end; - char *next; - size_t d; - next=*_s; - /*The second case is for broken servers.*/ - if(next[0]=='\r'&&next[1]=='\n'||OP_UNLIKELY(next[0]=='\n')){ - /*No more headers.*/ - *_header=NULL; - *_cdr=NULL; - *_s=NULL; - return 0; - } - header=next+op_http_lwsspn(next); - d=strcspn(header,OP_HTTP_CTOKEN); - if(OP_UNLIKELY(d<=0))return OP_FALSE; - header_end=header+d; - next=header_end+op_http_lwsspn(header_end); - if(OP_UNLIKELY(*next++!=':'))return OP_FALSE; - next+=op_http_lwsspn(next); - cdr=next; - do{ - cdr_end=next+strcspn(next,OP_HTTP_CTLS); - next=cdr_end+op_http_lwsspn(cdr_end); - } - while(next>cdr_end); - /*We are not mandating this be present thanks to broken servers.*/ - if(OP_LIKELY(*next=='\r'))next++; - if(OP_UNLIKELY(*next++!='\n'))return OP_FALSE; - *header_end='\0'; - *cdr_end='\0'; - /*Field names are case-insensitive.*/ - op_string_tolower(header); - *_header=header; - *_cdr=cdr; - *_s=next; - return 0; -} - -static opus_int64 op_http_parse_nonnegative_int64(const char **_next, - const char *_cdr){ - const char *next; - opus_int64 ret; - int i; - next=_cdr+strspn(_cdr,OP_HTTP_DIGIT); - *_next=next; - if(OP_UNLIKELY(next<=_cdr))return OP_FALSE; - while(*_cdr=='0')_cdr++; - if(OP_UNLIKELY(next-_cdr>19))return OP_EIMPL; - ret=0; - for(i=0;i<next-_cdr;i++){ - int digit; - digit=_cdr[i]-'0'; - /*Check for overflow.*/ - if(OP_UNLIKELY(ret>(OP_INT64_MAX-9)/10+(digit<=7)))return OP_EIMPL; - ret=ret*10+digit; - } - return ret; -} - -static opus_int64 op_http_parse_content_length(const char *_cdr){ - const char *next; - opus_int64 content_length; - content_length=op_http_parse_nonnegative_int64(&next,_cdr); - if(OP_UNLIKELY(*next!='\0'))return OP_FALSE; - return content_length; -} - -static int op_http_parse_content_range(opus_int64 *_first,opus_int64 *_last, - opus_int64 *_length,const char *_cdr){ - opus_int64 first; - opus_int64 last; - opus_int64 length; - size_t d; - if(OP_UNLIKELY(op_strncasecmp(_cdr,"bytes",5)!=0))return OP_FALSE; - _cdr+=5; - d=op_http_lwsspn(_cdr); - if(OP_UNLIKELY(d<=0))return OP_FALSE; - _cdr+=d; - if(*_cdr!='*'){ - first=op_http_parse_nonnegative_int64(&_cdr,_cdr); - if(OP_UNLIKELY(first<0))return (int)first; - _cdr+=op_http_lwsspn(_cdr); - if(*_cdr++!='-')return OP_FALSE; - _cdr+=op_http_lwsspn(_cdr); - last=op_http_parse_nonnegative_int64(&_cdr,_cdr); - if(OP_UNLIKELY(last<0))return (int)last; - _cdr+=op_http_lwsspn(_cdr); - } - else{ - /*This is for a 416 response (Requested range not satisfiable).*/ - first=last=-1; - _cdr++; - } - if(OP_UNLIKELY(*_cdr++!='/'))return OP_FALSE; - if(*_cdr!='*'){ - length=op_http_parse_nonnegative_int64(&_cdr,_cdr); - if(OP_UNLIKELY(length<0))return (int)length; - } - else{ - /*The total length is unspecified.*/ - _cdr++; - length=-1; - } - if(OP_UNLIKELY(*_cdr!='\0'))return OP_FALSE; - if(OP_UNLIKELY(last<first))return OP_FALSE; - if(length>=0&&OP_UNLIKELY(last>=length))return OP_FALSE; - *_first=first; - *_last=last; - *_length=length; - return 0; -} - -/*Parse the Connection response header and look for a "close" token. - Return: 1 if a "close" token is found, 0 if it's not found, and a negative - value on error.*/ -static int op_http_parse_connection(char *_cdr){ - size_t d; - int ret; - ret=0; - for(;;){ - d=strcspn(_cdr,OP_HTTP_CTOKEN); - if(OP_UNLIKELY(d<=0))return OP_FALSE; - if(op_strncasecmp(_cdr,"close",(int)d)==0)ret=1; - /*We're supposed to strip and ignore any headers mentioned in the - Connection header if this response is from an HTTP/1.0 server (to - work around forwarding of hop-by-hop headers by old proxies), but the - only hop-by-hop header we look at is Connection itself. - Everything else is a well-defined end-to-end header, and going back and - undoing the things we did based on already-examined headers would be - hard (since we only scan them once, in a destructive manner). - Therefore we just ignore all the other tokens.*/ - _cdr+=d; - d=op_http_lwsspn(_cdr); - if(d<=0)break; - _cdr+=d; - } - return OP_UNLIKELY(*_cdr!='\0')?OP_FALSE:ret; -} - -typedef int (*op_ssl_step_func)(SSL *_ssl_conn); - -/*Try to run an SSL function to completion (blocking if necessary).*/ -static int op_do_ssl_step(SSL *_ssl_conn,op_sock _fd,op_ssl_step_func _step){ - struct pollfd fd; - fd.fd=_fd; - for(;;){ - int ret; - int err; - ret=(*_step)(_ssl_conn); - if(ret>=0)return ret; - err=SSL_get_error(_ssl_conn,ret); - if(err==SSL_ERROR_WANT_READ)fd.events=POLLIN; - else if(err==SSL_ERROR_WANT_WRITE)fd.events=POLLOUT; - else return OP_FALSE; - if(poll(&fd,1,OP_POLL_TIMEOUT_MS)<=0)return OP_FALSE; - } -} - -/*Implement a BIO type that just indicates every operation should be retried. - We use this when initializing an SSL connection via a proxy to allow the - initial handshake to proceed all the way up to the first read attempt, and - then return. - This allows the TLS client hello message to be pipelined with the HTTP - CONNECT request.*/ - -static int op_bio_retry_write(BIO *_b,const char *_buf,int _num){ - (void)_buf; - (void)_num; - BIO_clear_retry_flags(_b); - BIO_set_retry_write(_b); - return -1; -} - -static int op_bio_retry_read(BIO *_b,char *_buf,int _num){ - (void)_buf; - (void)_num; - BIO_clear_retry_flags(_b); - BIO_set_retry_read(_b); - return -1; -} - -static int op_bio_retry_puts(BIO *_b,const char *_str){ - return op_bio_retry_write(_b,_str,0); -} - -static long op_bio_retry_ctrl(BIO *_b,int _cmd,long _num,void *_ptr){ - long ret; - (void)_b; - (void)_num; - (void)_ptr; - ret=0; - switch(_cmd){ - case BIO_CTRL_RESET: - case BIO_C_RESET_READ_REQUEST:{ - BIO_clear_retry_flags(_b); - /*Fall through.*/ - } - case BIO_CTRL_EOF: - case BIO_CTRL_SET: - case BIO_CTRL_SET_CLOSE: - case BIO_CTRL_FLUSH: - case BIO_CTRL_DUP:{ - ret=1; - }break; - } - return ret; -} - -static int op_bio_retry_new(BIO *_b){ - _b->init=1; - _b->num=0; - _b->ptr=NULL; - return 1; -} - -static int op_bio_retry_free(BIO *_b){ - return _b!=NULL; -} - -/*This is not const because OpenSSL doesn't allow it, even though it won't - write to it.*/ -static BIO_METHOD op_bio_retry_method={ - BIO_TYPE_NULL, - "retry", - op_bio_retry_write, - op_bio_retry_read, - op_bio_retry_puts, - NULL, - op_bio_retry_ctrl, - op_bio_retry_new, - op_bio_retry_free, - NULL -}; - -/*Establish a CONNECT tunnel and pipeline the start of the TLS handshake for - proxying https URL requests.*/ -static int op_http_conn_establish_tunnel(OpusHTTPStream *_stream, - OpusHTTPConn *_conn,op_sock _fd,SSL *_ssl_conn,BIO *_ssl_bio){ - BIO *retry_bio; - char *status_code; - char *next; - int ret; - _conn->ssl_conn=NULL; - _conn->fd=_fd; - OP_ASSERT(_stream->proxy_connect.nbuf>0); - ret=op_http_conn_write_fully(_conn, - _stream->proxy_connect.buf,_stream->proxy_connect.nbuf); - if(OP_UNLIKELY(ret<0))return ret; - retry_bio=BIO_new(&op_bio_retry_method); - if(OP_UNLIKELY(retry_bio==NULL))return OP_EFAULT; - SSL_set_bio(_ssl_conn,retry_bio,_ssl_bio); - SSL_set_connect_state(_ssl_conn); - /*This shouldn't succeed, since we can't read yet.*/ - OP_ALWAYS_TRUE(SSL_connect(_ssl_conn)<0); - SSL_set_bio(_ssl_conn,_ssl_bio,_ssl_bio); - /*Only now do we disable write coalescing, to allow the CONNECT - request and the start of the TLS handshake to be combined.*/ - op_sock_set_tcp_nodelay(_fd,1); - ret=op_http_conn_read_response(_conn,&_stream->response); - if(OP_UNLIKELY(ret<0))return ret; - next=op_http_parse_status_line(NULL,&status_code,_stream->response.buf); - /*According to RFC 2817, "Any successful (2xx) response to a - CONNECT request indicates that the proxy has established a - connection to the requested host and port.*/ - if(OP_UNLIKELY(next==NULL)||OP_UNLIKELY(status_code[0]!='2'))return OP_FALSE; - return 0; -} - -/*Match a host name against a host with a possible wildcard pattern according - to the rules of RFC 6125 Section 6.4.3. - Return: 0 if the pattern doesn't match, and a non-zero value if it does.*/ -static int op_http_hostname_match(const char *_host,size_t _host_len, - ASN1_STRING *_pattern){ - const char *pattern; - size_t host_label_len; - size_t host_suffix_len; - size_t pattern_len; - size_t pattern_label_len; - size_t pattern_prefix_len; - size_t pattern_suffix_len; - pattern=(const char *)ASN1_STRING_data(_pattern); - pattern_len=strlen(pattern); - /*Check the pattern for embedded NULs.*/ - if(OP_UNLIKELY(pattern_len!=(size_t)ASN1_STRING_length(_pattern)))return 0; - pattern_label_len=strcspn(pattern,"."); - OP_ASSERT(pattern_label_len<=pattern_len); - pattern_prefix_len=strcspn(pattern,"*"); - if(pattern_prefix_len>=pattern_label_len){ - /*"The client SHOULD NOT attempt to match a presented identifier in which - the wildcard character comprises a label other than the left-most label - (e.g., do not match bar.*.example.net)." [RFC 6125 Section 6.4.3]*/ - if(pattern_prefix_len<pattern_len)return 0; - /*If the pattern does not contain a wildcard in the first element, do an - exact match. - Don't use the system strcasecmp here, as that uses the locale and - RFC 4343 makes clear that DNS's case-insensitivity only applies to - the ASCII range.*/ - return _host_len==pattern_len&&op_strncasecmp(_host,pattern,_host_len)==0; - } - /*"However, the client SHOULD NOT attempt to match a presented identifier - where the wildcard character is embedded within an A-label or U-label of - an internationalized domain name." [RFC 6125 Section 6.4.3]*/ - if(op_strncasecmp(pattern,"xn--",4)==0)return 0; - host_label_len=strcspn(_host,"."); - /*Make sure the host has at least two dots, to prevent the wildcard match - from being ridiculously wide. - We should have already checked to ensure it had at least one.*/ - if(OP_UNLIKELY(_host[host_label_len]!='.') - ||strchr(_host+host_label_len+1,'.')==NULL){ - return 0; - } - OP_ASSERT(host_label_len<_host_len); - /*"If the wildcard character is the only character of the left-most label in - the presented identifier, the client SHOULD NOT compare against anything - but the left-most label of the reference identifier (e.g., *.example.com - would match foo.example.com but not bar.foo.example.com)." [RFC 6125 - Section 6.4.3] - This is really confusingly worded, as we check this by actually comparing - the rest of the pattern for an exact match. - We also use the fact that the wildcard must match at least one character, - so the left-most label of the hostname must be at least as large as the - left-most label of the pattern.*/ - if(host_label_len<pattern_label_len)return 0; - OP_ASSERT(pattern[pattern_prefix_len]=='*'); - /*"The client MAY match a presented identifier in which the wildcard - character is not the only character of the label (e.g., baz*.example.net - and *baz.example.net and b*z.example.net would be taken to match - baz1.example.net and foobaz.example.net and buzz.example.net, - respectively)." [RFC 6125 Section 6.4.3]*/ - pattern_suffix_len=pattern_len-pattern_prefix_len-1; - host_suffix_len=_host_len-host_label_len - +pattern_label_len-pattern_prefix_len-1; - return pattern_suffix_len==host_suffix_len - &&op_strncasecmp(_host,pattern,pattern_prefix_len)==0 - &&op_strncasecmp(_host+_host_len-host_suffix_len, - pattern+pattern_prefix_len+1,host_suffix_len)==0; -} - -/*Convert a host to a numeric address, if possible. - Return: A struct addrinfo containing the address, if it was numeric, and NULL - otherise.*/ -static struct addrinfo *op_inet_pton(const char *_host){ - struct addrinfo *addrs; - struct addrinfo hints; - memset(&hints,0,sizeof(hints)); - hints.ai_socktype=SOCK_STREAM; - hints.ai_flags=AI_NUMERICHOST; - if(!getaddrinfo(_host,NULL,&hints,&addrs))return addrs; - return NULL; -} - -/*Verify the server's hostname matches the certificate they presented using - the procedure from Section 6 of RFC 6125. - Return: 0 if the certificate doesn't match, and a non-zero value if it does.*/ -static int op_http_verify_hostname(OpusHTTPStream *_stream,SSL *_ssl_conn){ - X509 *peer_cert; - STACK_OF(GENERAL_NAME) *san_names; - char *host; - size_t host_len; - int ret; - host=_stream->url.host; - host_len=strlen(host); - peer_cert=SSL_get_peer_certificate(_ssl_conn); - /*We set VERIFY_PEER, so we shouldn't get here without a certificate.*/ - if(OP_UNLIKELY(peer_cert==NULL))return 0; - ret=0; - OP_ASSERT(host_len<INT_MAX); - /*RFC 2818 says (after correcting for Eratta 1077): "If a subjectAltName - extension of type dNSName is present, that MUST be used as the identity. - Otherwise, the (most specific) Common Name field in the Subject field of - the certificate MUST be used. - Although the use of the Common Name is existing practice, it is deprecated - and Certification Authorities are encouraged to use the dNSName - instead." - "Matching is performed using the matching rules specified by RFC 2459. - If more than one identity of a given type is present in the certificate - (e.g., more than one dNSName name), a match in any one of the set is - considered acceptable. - Names may contain the wildcard character * which is condered to match any - single domain name component or component fragment. - E.g., *.a.com matches foo.a.com but not bar.foo.a.com. - f*.com matches foo.com but not bar.com." - "In some cases, the URI is specified as an IP address rather than a - hostname. - In this case, the iPAddress subjectAltName must be present in the - certificate and must exactly match the IP in the URI."*/ - san_names=X509_get_ext_d2i(peer_cert,NID_subject_alt_name,NULL,NULL); - if(san_names!=NULL){ - struct addrinfo *addr; - unsigned char *ip; - int ip_len; - int nsan_names; - int sni; - /*Check to see if the host was specified as a simple IP address.*/ - addr=op_inet_pton(host); - ip=NULL; - ip_len=0; - if(addr!=NULL){ - switch(addr->ai_family){ - case AF_INET:{ - struct sockaddr_in *s; - s=(struct sockaddr_in *)addr->ai_addr; - OP_ASSERT(addr->ai_addrlen>=sizeof(*s)); - ip=(unsigned char *)&s->sin_addr; - ip_len=sizeof(s->sin_addr); - }break; - case AF_INET6:{ - struct sockaddr_in6 *s; - s=(struct sockaddr_in6 *)addr->ai_addr; - OP_ASSERT(addr->ai_addrlen>=sizeof(*s)); - ip=(unsigned char *)&s->sin6_addr; - ip_len=sizeof(s->sin6_addr); - }break; - } - } - /*We can only verify fully-qualified domain names. - To quote RFC 6125: "The extracted data MUST include only information that - can be securely parsed out of the inputs (e.g., parsing the fully - qualified DNS domain name out of the "host" component (or its - equivalent) of a URI or deriving the application service type from the - scheme of a URI) ..." - We don't have a way to check (without relying on DNS records, which might - be subverted) if this address is fully-qualified. - This is particularly problematic when using a CONNECT tunnel, as it is - the server that does DNS lookup, not us. - However, we are certain that if the hostname has no '.', it is definitely - not a fully-qualified domain name (with the exception of crazy TLDs that - actually resolve, like "uz", but I am willing to ignore those). - RFC 1535 says "...in any event where a '.' exists in a specified name it - should be assumed to be a fully qualified domain name (FQDN) and SHOULD - be tried as a rooted name first." - That doesn't give us any security guarantees, of course (a subverted DNS - could fail the original query and our resolver might still retry with a - local domain appended). - If we don't have a FQDN, just set the number of names to 0, so we'll fail - and clean up any resources we allocated.*/ - if(ip==NULL&&strchr(host,'.')==NULL)nsan_names=0; - /*RFC 2459 says there MUST be at least one, but we don't depend on it.*/ - else nsan_names=sk_GENERAL_NAME_num(san_names); - for(sni=0;sni<nsan_names;sni++){ - const GENERAL_NAME *name; - name=sk_GENERAL_NAME_value(san_names,sni); - if(ip==NULL){ - if(name->type==GEN_DNS - &&op_http_hostname_match(host,host_len,name->d.dNSName)){ - ret=1; - break; - } - } - else if(name->type==GEN_IPADD){ - unsigned char *cert_ip; - /*If we do have an IP address, compare it directly. - RFC 6125: "When the reference identity is an IP address, the identity - MUST be converted to the 'network byte order' octet string - representation. - For IP Version 4, as specified in RFC 791, the octet string will - contain exactly four octets. - For IP Version 6, as specified in RFC 2460, the octet string will - contain exactly sixteen octets. - This octet string is then compared against subjectAltName values of - type iPAddress. - A match occurs if the reference identity octet string and the value - octet strings are identical."*/ - cert_ip=ASN1_STRING_data(name->d.iPAddress); - if(ip_len==ASN1_STRING_length(name->d.iPAddress) - &&memcmp(ip,cert_ip,ip_len)==0){ - ret=1; - break; - } - } - } - sk_GENERAL_NAME_pop_free(san_names,GENERAL_NAME_free); - if(addr!=NULL)freeaddrinfo(addr); - } - /*Do the same FQDN check we did above. - We don't do this once in advance for both cases, because in the - subjectAltName case we might have an IPv6 address without a dot.*/ - else if(strchr(host,'.')!=NULL){ - int last_cn_loc; - int cn_loc; - /*If there is no subjectAltName, match against commonName. - RFC 6125 says that at least one significant CA is known to issue certs - with multiple CNs, although it SHOULD NOT. - It also says: "The server's identity may also be verified by comparing - the reference identity to the Common Name (CN) value in the last - Relative Distinguished Name (RDN) of the subject field of the server's - certificate (where "last" refers to the DER-encoded order...)." - So find the last one and check it.*/ - cn_loc=-1; - do{ - last_cn_loc=cn_loc; - cn_loc=X509_NAME_get_index_by_NID(X509_get_subject_name(peer_cert), - NID_commonName,last_cn_loc); - } - while(cn_loc>=0); - ret=last_cn_loc>=0 - &&op_http_hostname_match(host,host_len, - X509_NAME_ENTRY_get_data( - X509_NAME_get_entry(X509_get_subject_name(peer_cert),last_cn_loc))); - } - X509_free(peer_cert); - return ret; -} - -/*Perform the TLS handshake on a new connection.*/ -static int op_http_conn_start_tls(OpusHTTPStream *_stream,OpusHTTPConn *_conn, - op_sock _fd,SSL *_ssl_conn){ - SSL_SESSION *ssl_session; - BIO *ssl_bio; - int skip_certificate_check; - int ret; - ssl_bio=BIO_new_socket(_fd,BIO_NOCLOSE); - if(OP_LIKELY(ssl_bio==NULL))return OP_FALSE; -# if !defined(OPENSSL_NO_TLSEXT) - /*Support for RFC 6066 Server Name Indication.*/ - SSL_set_tlsext_host_name(_ssl_conn,_stream->url.host); -# endif - /*Resume a previous session if available.*/ - if(_stream->ssl_session!=NULL){ - SSL_set_session(_ssl_conn,_stream->ssl_session); - } - /*If we're proxying, establish the CONNECT tunnel.*/ - if(_stream->proxy_connect.nbuf>0){ - ret=op_http_conn_establish_tunnel(_stream,_conn, - _fd,_ssl_conn,ssl_bio); - if(OP_UNLIKELY(ret<0))return ret; - } - else{ - /*Otherwise, just use this socket directly.*/ - op_sock_set_tcp_nodelay(_fd,1); - SSL_set_bio(_ssl_conn,ssl_bio,ssl_bio); - SSL_set_connect_state(_ssl_conn); - } - ret=op_do_ssl_step(_ssl_conn,_fd,SSL_connect); - if(OP_UNLIKELY(ret<=0))return OP_FALSE; - ssl_session=_stream->ssl_session; - skip_certificate_check=_stream->skip_certificate_check; - if(ssl_session==NULL||!skip_certificate_check){ - ret=op_do_ssl_step(_ssl_conn,_fd,SSL_do_handshake); - if(OP_UNLIKELY(ret<=0))return OP_FALSE; - /*OpenSSL does not do hostname verification, despite the fact that we just - passed it the hostname above in the call to SSL_set_tlsext_host_name(), - because they are morons. - Do it for them.*/ - if(!skip_certificate_check&&!op_http_verify_hostname(_stream,_ssl_conn)){ - return OP_FALSE; - } - if(ssl_session==NULL){ - /*Save the session for later resumption.*/ - _stream->ssl_session=SSL_get1_session(_ssl_conn); - } - } - _conn->ssl_conn=_ssl_conn; - _conn->fd=_fd; - _conn->nrequests_left=OP_PIPELINE_MAX_REQUESTS; - return 0; -} - -/*Try to start a connection to the next address in the given list of a given - type. - _fd: The socket to connect with. - [inout] _addr: A pointer to the list of addresses. - This will be advanced to the first one that matches the given - address family (possibly the current one). - _ai_family: The address family to connect to. - Return: 1 If the connection was successful. - 0 If the connection is in progress. - OP_FALSE If the connection failed and there were no more addresses - left to try. - *_addr will be set to NULL in this case.*/ -static int op_sock_connect_next(op_sock _fd, - const struct addrinfo **_addr,int _ai_family){ - const struct addrinfo *addr; - int err; - addr=*_addr; - for(;;){ - /*Move to the next address of the requested type.*/ - for(;addr!=NULL&&addr->ai_family!=_ai_family;addr=addr->ai_next); - *_addr=addr; - /*No more: failure.*/ - if(addr==NULL)return OP_FALSE; - if(connect(_fd,addr->ai_addr,addr->ai_addrlen)>=0)return 1; - err=op_errno(); - /*Winsock will set WSAEWOULDBLOCK.*/ - if(OP_LIKELY(err==EINPROGRESS||err==EWOULDBLOCK))return 0; - addr=addr->ai_next; - } -} - -/*The number of address families to try connecting to simultaneously.*/ -# define OP_NPROTOS (2) - -static int op_http_connect_impl(OpusHTTPStream *_stream,OpusHTTPConn *_conn, - const struct addrinfo *_addrs,struct timeb *_start_time){ - const struct addrinfo *addr; - const struct addrinfo *addrs[OP_NPROTOS]; - struct pollfd fds[OP_NPROTOS]; - int ai_family; - int nprotos; - int ret; - int pi; - int pj; - for(pi=0;pi<OP_NPROTOS;pi++)addrs[pi]=NULL; - /*Try connecting via both IPv4 and IPv6 simultaneously, and keep the first - one that succeeds. - Start by finding the first address from each family. - We order the first connection attempts in the same order the address - families were returned in the DNS records in accordance with RFC 6555.*/ - for(addr=_addrs,nprotos=0;addr!=NULL&&nprotos<OP_NPROTOS;addr=addr->ai_next){ - if(addr->ai_family==AF_INET6||addr->ai_family==AF_INET){ - OP_ASSERT(addr->ai_addrlen<=sizeof(struct sockaddr_in6)); - OP_ASSERT(addr->ai_addrlen<=sizeof(struct sockaddr_in)); - /*If we've seen this address family before, skip this address for now.*/ - for(pi=0;pi<nprotos;pi++)if(addrs[pi]->ai_family==addr->ai_family)break; - if(pi<nprotos)continue; - addrs[nprotos++]=addr; - } - } - /*Pop the connection off the free list and put it on the LRU list.*/ - OP_ASSERT(_stream->free_head==_conn); - _stream->free_head=_conn->next; - _conn->next=_stream->lru_head; - _stream->lru_head=_conn; - ftime(_start_time); - *&_conn->read_time=*_start_time; - _conn->read_bytes=0; - _conn->read_rate=0; - /*Try to start a connection to each protocol. - RFC 6555 says it is RECOMMENDED that connection attempts be paced - 150...250 ms apart "to balance human factors against network load", but - that "stateful algorithms" (that's us) "are expected to be more - aggressive". - We are definitely more aggressive: we don't pace at all.*/ - for(pi=0;pi<nprotos;pi++){ - ai_family=addrs[pi]->ai_family; - fds[pi].fd=socket(ai_family,SOCK_STREAM,addrs[pi]->ai_protocol); - fds[pi].events=POLLOUT; - if(OP_LIKELY(fds[pi].fd!=OP_INVALID_SOCKET)){ - if(OP_LIKELY(op_sock_set_nonblocking(fds[pi].fd,1)>=0)){ - ret=op_sock_connect_next(fds[pi].fd,addrs+pi,ai_family); - if(OP_UNLIKELY(ret>0)){ - /*It succeeded right away (technically possible), so stop.*/ - nprotos=pi+1; - break; - } - /*Otherwise go on to the next protocol, and skip the clean-up below.*/ - else if(ret==0)continue; - /*Tried all the addresses for this protocol.*/ - } - /*Clean up the socket.*/ - close(fds[pi].fd); - } - /*Remove this protocol from the list.*/ - memmove(addrs+pi,addrs+pi+1,sizeof(*addrs)*(nprotos-pi-1)); - nprotos--; - pi--; - } - /*Wait for one of the connections to finish.*/ - while(pi>=nprotos&&nprotos>0&&poll(fds,nprotos,OP_POLL_TIMEOUT_MS)>0){ - for(pi=0;pi<nprotos;pi++){ - socklen_t errlen; - int err; - /*Still waiting...*/ - if(!fds[pi].revents)continue; - errlen=sizeof(err); - /*Some platforms will return the pending error in &err and return 0. - Others will put it in errno and return -1.*/ - ret=getsockopt(fds[pi].fd,SOL_SOCKET,SO_ERROR,&err,&errlen); - if(ret<0)err=op_errno(); - /*Success!*/ - if(err==0||err==EISCONN)break; - /*Move on to the next address for this protocol.*/ - ai_family=addrs[pi]->ai_family; - addrs[pi]=addrs[pi]->ai_next; - ret=op_sock_connect_next(fds[pi].fd,addrs+pi,ai_family); - /*It succeeded right away, so stop.*/ - if(ret>0)break; - /*Otherwise go on to the next protocol, and skip the clean-up below.*/ - else if(ret==0)continue; - /*Tried all the addresses for this protocol. - Remove it from the list.*/ - close(fds[pi].fd); - memmove(fds+pi,fds+pi+1,sizeof(*fds)*(nprotos-pi-1)); - memmove(addrs+pi,addrs+pi+1,sizeof(*addrs)*(nprotos-pi-1)); - nprotos--; - pi--; - } - } - /*Close all the other sockets.*/ - for(pj=0;pj<nprotos;pj++)if(pi!=pj)close(fds[pj].fd); - /*If none of them succeeded, we're done.*/ - if(pi>=nprotos)return OP_FALSE; - /*Save this address for future connection attempts.*/ - if(addrs[pi]!=&_stream->addr_info){ - memcpy(&_stream->addr_info,addrs[pi],sizeof(_stream->addr_info)); - _stream->addr_info.ai_addr=&_stream->addr.s; - _stream->addr_info.ai_next=NULL; - memcpy(&_stream->addr,addrs[pi]->ai_addr,addrs[pi]->ai_addrlen); - } - if(OP_URL_IS_SSL(&_stream->url)){ - SSL *ssl_conn; - /*Start the SSL connection.*/ - OP_ASSERT(_stream->ssl_ctx!=NULL); - ssl_conn=SSL_new(_stream->ssl_ctx); - if(OP_LIKELY(ssl_conn!=NULL)){ - ret=op_http_conn_start_tls(_stream,_conn,fds[pi].fd,ssl_conn); - if(OP_LIKELY(ret>=0))return ret; - SSL_free(ssl_conn); - } - close(fds[pi].fd); - _conn->fd=OP_INVALID_SOCKET; - return OP_FALSE; - } - /*Just a normal non-SSL connection.*/ - _conn->ssl_conn=NULL; - _conn->fd=fds[pi].fd; - _conn->nrequests_left=OP_PIPELINE_MAX_REQUESTS; - /*Disable write coalescing. - We always send whole requests at once and always parse the response headers - before sending another one.*/ - op_sock_set_tcp_nodelay(fds[pi].fd,1); - return 0; -} - -static int op_http_connect(OpusHTTPStream *_stream,OpusHTTPConn *_conn, - const struct addrinfo *_addrs,struct timeb *_start_time){ - struct timeb resolve_time; - struct addrinfo *new_addrs; - int ret; - /*Re-resolve the host if we need to (RFC 6555 says we MUST do so - occasionally).*/ - new_addrs=NULL; - ftime(&resolve_time); - if(_addrs!=&_stream->addr_info||op_time_diff_ms(&resolve_time, - &_stream->resolve_time)>=OP_RESOLVE_CACHE_TIMEOUT_MS){ - new_addrs=op_resolve(_stream->connect_host,_stream->connect_port); - if(OP_LIKELY(new_addrs!=NULL)){ - _addrs=new_addrs; - *&_stream->resolve_time=*&resolve_time; - } - else if(OP_LIKELY(_addrs==NULL))return OP_FALSE; - } - ret=op_http_connect_impl(_stream,_conn,_addrs,_start_time); - if(new_addrs!=NULL)freeaddrinfo(new_addrs); - return ret; -} - -# define OP_BASE64_LENGTH(_len) (((_len)+2)/3*4) - -static const char BASE64_TABLE[64]={ - 'A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P', - 'Q','R','S','T','U','V','W','X','Y','Z','a','b','c','d','e','f', - 'g','h','i','j','k','l','m','n','o','p','q','r','s','t','u','v', - 'w','x','y','z','0','1','2','3','4','5','6','7','8','9','+','/' -}; - -static char *op_base64_encode(char *_dst,const char *_src,int _len){ - unsigned s0; - unsigned s1; - unsigned s2; - int ngroups; - int i; - ngroups=_len/3; - for(i=0;i<ngroups;i++){ - s0=_src[3*i+0]; - s1=_src[3*i+1]; - s2=_src[3*i+2]; - _dst[4*i+0]=BASE64_TABLE[s0>>2]; - _dst[4*i+1]=BASE64_TABLE[(s0&3)<<4|s1>>4]; - _dst[4*i+2]=BASE64_TABLE[(s1&15)<<2|s2>>6]; - _dst[4*i+3]=BASE64_TABLE[s2&63]; - } - _len-=3*i; - if(_len==1){ - s0=_src[3*i+0]; - _dst[4*i+0]=BASE64_TABLE[s0>>2]; - _dst[4*i+1]=BASE64_TABLE[(s0&3)<<4]; - _dst[4*i+2]='='; - _dst[4*i+3]='='; - i++; - } - else if(_len==2){ - s0=_src[3*i+0]; - s1=_src[3*i+1]; - _dst[4*i+0]=BASE64_TABLE[s0>>2]; - _dst[4*i+1]=BASE64_TABLE[(s0&3)<<4|s1>>4]; - _dst[4*i+2]=BASE64_TABLE[(s1&15)<<2]; - _dst[4*i+3]='='; - i++; - } - _dst[4*i]='\0'; - return _dst+4*i; -} - -/*Construct an HTTP authorization header using RFC 2617's Basic Authentication - Scheme and append it to the given string buffer.*/ -static int op_sb_append_basic_auth_header(OpusStringBuf *_sb, - const char *_header,const char *_user,const char *_pass){ - int user_len; - int pass_len; - int user_pass_len; - int base64_len; - int nbuf_total; - int ret; - ret=op_sb_append_string(_sb,_header); - ret|=op_sb_append(_sb,": Basic ",8); - user_len=strlen(_user); - pass_len=strlen(_pass); - if(OP_UNLIKELY(pass_len>INT_MAX-user_len))return OP_EFAULT; - if(OP_UNLIKELY(user_len+pass_len>(INT_MAX>>2)*3-3))return OP_EFAULT; - user_pass_len=user_len+1+pass_len; - base64_len=OP_BASE64_LENGTH(user_pass_len); - /*Stick "user:pass" at the end of the buffer so we can Base64 encode it - in-place.*/ - nbuf_total=_sb->nbuf; - if(OP_UNLIKELY(base64_len>INT_MAX-nbuf_total))return OP_EFAULT; - nbuf_total+=base64_len; - ret|=op_sb_ensure_capacity(_sb,nbuf_total); - if(OP_UNLIKELY(ret<0))return ret; - _sb->nbuf=nbuf_total-user_pass_len; - OP_ALWAYS_TRUE(!op_sb_append(_sb,_user,user_len)); - OP_ALWAYS_TRUE(!op_sb_append(_sb,":",1)); - OP_ALWAYS_TRUE(!op_sb_append(_sb,_pass,pass_len)); - op_base64_encode(_sb->buf+nbuf_total-base64_len, - _sb->buf+nbuf_total-user_pass_len,user_pass_len); - return op_sb_append(_sb,"\r\n",2); -} - -static int op_http_allow_pipelining(const char *_server){ - /*Servers known to do bad things with pipelined requests. - This list is taken from Gecko's nsHttpConnection::SupportsPipelining() (in - netwerk/protocol/http/nsHttpConnection.cpp).*/ - static const char *BAD_SERVERS[]={ - "EFAServer/", - "Microsoft-IIS/4.", - "Microsoft-IIS/5.", - "Netscape-Enterprise/3.", - "Netscape-Enterprise/4.", - "Netscape-Enterprise/5.", - "Netscape-Enterprise/6.", - "WebLogic 3.", - "WebLogic 4.", - "WebLogic 5.", - "WebLogic 6.", - "Winstone Servlet Engine v0." - }; -# define NBAD_SERVERS ((int)(sizeof(BAD_SERVERS)/sizeof(*BAD_SERVERS))) - if(*_server>='E'&&*_server<='W'){ - int si; - for(si=0;si<NBAD_SERVERS;si++){ - if(strncmp(_server,BAD_SERVERS[si],strlen(BAD_SERVERS[si]))==0){ - return 0; - } - } - } - return 1; -# undef NBAD_SERVERS -} - -static int op_http_stream_open(OpusHTTPStream *_stream,const char *_url, - int _skip_certificate_check,const char *_proxy_host,unsigned _proxy_port, - const char *_proxy_user,const char *_proxy_pass,OpusServerInfo *_info){ - struct addrinfo *addrs; - int nredirs; - int ret; -#if defined(_WIN32) - op_init_winsock(); -#endif - ret=op_parse_url(&_stream->url,_url); - if(OP_UNLIKELY(ret<0))return ret; - if(_proxy_host!=NULL){ - if(OP_UNLIKELY(_proxy_port>65535U))return OP_EINVAL; - _stream->connect_host=op_string_dup(_proxy_host); - _stream->connect_port=_proxy_port; - } - else{ - _stream->connect_host=_stream->url.host; - _stream->connect_port=_stream->url.port; - } - addrs=NULL; - for(nredirs=0;nredirs<OP_REDIRECT_LIMIT;nredirs++){ - OpusParsedURL next_url; - struct timeb start_time; - struct timeb end_time; - char *next; - char *status_code; - int minor_version_pos; - int v1_1_compat; - /*Initialize the SSL library if necessary.*/ - if(OP_URL_IS_SSL(&_stream->url)&&_stream->ssl_ctx==NULL){ - SSL_CTX *ssl_ctx; -# if !defined(OPENSSL_NO_LOCKING) - /*The documentation says SSL_library_init() is not reentrant. - We don't want to add our own depenencies on a threading library, and it - appears that it's safe to call OpenSSL's locking functions before the - library is initialized, so that's what we'll do (really OpenSSL should - do this for us). - This doesn't guarantee that _other_ threads in the application aren't - calling SSL_library_init() at the same time, but there's not much we - can do about that.*/ - CRYPTO_w_lock(CRYPTO_LOCK_SSL); -# endif - SSL_library_init(); - /*Needed to get SHA2 algorithms with old OpenSSL versions.*/ - OpenSSL_add_ssl_algorithms(); -# if !defined(OPENSSL_NO_LOCKING) - CRYPTO_w_unlock(CRYPTO_LOCK_SSL); -# endif - ssl_ctx=SSL_CTX_new(SSLv23_client_method()); - if(ssl_ctx==NULL)return OP_EFAULT; - if(!_skip_certificate_check){ - /*We don't do anything if this fails, since it just means we won't load - any certificates (and thus all checks will fail). - However, as that is probably the result of a system - mis-configuration, assert here to make it easier to identify.*/ - OP_ALWAYS_TRUE(SSL_CTX_set_default_verify_paths(ssl_ctx)); - SSL_CTX_set_verify(ssl_ctx,SSL_VERIFY_PEER,NULL); - } - _stream->ssl_ctx=ssl_ctx; - _stream->skip_certificate_check=_skip_certificate_check; - if(_proxy_host!=NULL){ - /*We need to establish a CONNECT tunnel to handle https proxying. - Build the request we'll send to do so.*/ - _stream->proxy_connect.nbuf=0; - ret=op_sb_append(&_stream->proxy_connect,"CONNECT ",8); - ret|=op_sb_append_string(&_stream->proxy_connect,_stream->url.host); - ret|=op_sb_append_port(&_stream->proxy_connect,_stream->url.port); - /*CONNECT requires at least HTTP 1.1.*/ - ret|=op_sb_append(&_stream->proxy_connect," HTTP/1.1\r\n",11); - ret|=op_sb_append(&_stream->proxy_connect,"Host: ",6); - ret|=op_sb_append_string(&_stream->proxy_connect,_stream->url.host); - /*The example in RFC 2817 Section 5.2 specifies an explicit port even - when connecting to the default port. - Given that the proxy doesn't know whether we're trying to connect to - an http or an https URL except by the port number, this seems like a - good idea.*/ - ret|=op_sb_append_port(&_stream->proxy_connect,_stream->url.port); - ret|=op_sb_append(&_stream->proxy_connect,"\r\n",2); - ret|=op_sb_append(&_stream->proxy_connect,"User-Agent: .\r\n",15); - if(_proxy_user!=NULL&&_proxy_pass!=NULL){ - ret|=op_sb_append_basic_auth_header(&_stream->proxy_connect, - "Proxy-Authorization",_proxy_user,_proxy_pass); - } - /*For backwards compatibility.*/ - ret|=op_sb_append(&_stream->proxy_connect, - "Proxy-Connection: keep-alive\r\n",30); - ret|=op_sb_append(&_stream->proxy_connect,"\r\n",2); - if(OP_UNLIKELY(ret<0))return ret; - } - } - /*Actually make the connection.*/ - ret=op_http_connect(_stream,_stream->conns+0,addrs,&start_time); - if(OP_UNLIKELY(ret<0))return ret; - /*Build the request to send.*/ - _stream->request.nbuf=0; - ret=op_sb_append(&_stream->request,"GET ",4); - ret|=op_sb_append_string(&_stream->request, - _proxy_host!=NULL?_url:_stream->url.path); - /*Send HTTP/1.0 by default for maximum compatibility (so we don't have to - re-try if HTTP/1.1 fails, though it shouldn't, even for a 1.0 server). - This means we aren't conditionally compliant with RFC 2145, because we - violate the requirement that "An HTTP client SHOULD send a request - version equal to the highest version for which the client is at least - conditionally compliant...". - According to RFC 2145, that means we can't claim any compliance with any - IETF HTTP specification.*/ - ret|=op_sb_append(&_stream->request," HTTP/1.0\r\n",11); - /*Remember where this is so we can upgrade to HTTP/1.1 if the server - supports it.*/ - minor_version_pos=_stream->request.nbuf-3; - ret|=op_sb_append(&_stream->request,"Host: ",6); - ret|=op_sb_append_string(&_stream->request,_stream->url.host); - if(!OP_URL_IS_DEFAULT_PORT(&_stream->url)){ - ret|=op_sb_append_port(&_stream->request,_stream->url.port); - } - ret|=op_sb_append(&_stream->request,"\r\n",2); - /*User-Agents have been a bad idea, so send as little as possible. - RFC 2616 requires at least one token in the User-Agent, which must have - at least one character.*/ - ret|=op_sb_append(&_stream->request,"User-Agent: .\r\n",15); - if(_proxy_host!=NULL&&!OP_URL_IS_SSL(&_stream->url) - &&_proxy_user!=NULL&&_proxy_pass!=NULL){ - ret|=op_sb_append_basic_auth_header(&_stream->request, - "Proxy-Authorization",_proxy_user,_proxy_pass); - } - if(_stream->url.user!=NULL&&_stream->url.pass!=NULL){ - ret|=op_sb_append_basic_auth_header(&_stream->request, - "Authorization",_stream->url.user,_stream->url.pass); - } - /*Always send a Referer [sic] header. - It's common to refuse to serve a resource unless one is present. - We just use the relative "/" URI to suggest we came from the same domain, - as this is the most common check. - This might violate RFC 2616's mandate that the field "MUST NOT be sent if - the Request-URI was obtained from a source that does not have its own - URI, such as input from the user keyboard," but we don't really have any - way to know.*/ - /*TODO: Should we update this on redirects?*/ - ret|=op_sb_append(&_stream->request,"Referer: /\r\n",12); - /*Always send a Range request header to find out if we're seekable. - This requires an HTTP/1.1 server to succeed, but we'll still get what we - want with an HTTP/1.0 server that ignores this request header.*/ - ret|=op_sb_append(&_stream->request,"Range: bytes=0-\r\n",17); - /*Remember where this is so we can append offsets to it later.*/ - _stream->request_tail=_stream->request.nbuf-4; - ret|=op_sb_append(&_stream->request,"\r\n",2); - if(OP_UNLIKELY(ret<0))return ret; - ret=op_http_conn_write_fully(_stream->conns+0, - _stream->request.buf,_stream->request.nbuf); - if(OP_UNLIKELY(ret<0))return ret; - ret=op_http_conn_read_response(_stream->conns+0,&_stream->response); - if(OP_UNLIKELY(ret<0))return ret; - ftime(&end_time); - next=op_http_parse_status_line(&v1_1_compat,&status_code, - _stream->response.buf); - if(OP_UNLIKELY(next==NULL))return OP_FALSE; - if(status_code[0]=='2'){ - opus_int64 content_length; - opus_int64 range_length; - int pipeline_supported; - int pipeline_disabled; - /*We only understand 20x codes.*/ - if(status_code[1]!='0')return OP_FALSE; - content_length=-1; - range_length=-1; - /*Pipelining must be explicitly enabled.*/ - pipeline_supported=0; - pipeline_disabled=0; - for(;;){ - char *header; - char *cdr; - ret=op_http_get_next_header(&header,&cdr,&next); - if(OP_UNLIKELY(ret<0))return ret; - if(header==NULL)break; - if(strcmp(header,"content-length")==0){ - /*Two Content-Length headers?*/ - if(OP_UNLIKELY(content_length>=0))return OP_FALSE; - content_length=op_http_parse_content_length(cdr); - if(OP_UNLIKELY(content_length<0))return (int)content_length; - /*Make sure the Content-Length and Content-Range headers match.*/ - if(range_length>=0&&OP_UNLIKELY(content_length!=range_length)){ - return OP_FALSE; - } - } - else if(strcmp(header,"content-range")==0){ - opus_int64 range_first; - opus_int64 range_last; - /*Two Content-Range headers?*/ - if(OP_UNLIKELY(range_length>=0))return OP_FALSE; - ret=op_http_parse_content_range(&range_first,&range_last, - &range_length,cdr); - if(OP_UNLIKELY(ret<0))return ret; - /*"A response with satus code 206 (Partial Content) MUST NOT - include a Content-Range field with a byte-range-resp-spec of - '*'."*/ - if(status_code[2]=='6' - &&(OP_UNLIKELY(range_first<0)||OP_UNLIKELY(range_last<0))){ - return OP_FALSE; - } - /*We asked for the entire resource.*/ - if(range_length>=0){ - /*Quit if we didn't get it.*/ - if(range_last>=0&&OP_UNLIKELY(range_last!=range_length-1)){ - return OP_FALSE; - } - } - /*If there was no length, use the end of the range.*/ - else if(range_last>=0)range_length=range_last+1; - /*Make sure the Content-Length and Content-Range headers match.*/ - if(content_length>=0&&OP_UNLIKELY(content_length!=range_length)){ - return OP_FALSE; - } - } - else if(strcmp(header,"connection")==0){ - /*According to RFC 2616, if an HTTP/1.1 application does not support - pipelining, it "MUST include the 'close' connection option in - every message." - Therefore, if we receive one in the initial response, disable - pipelining entirely. - The server still might support it (e.g., we might just have hit the - request limit for a temporary child process), but if it doesn't - and we assume it does, every time we cross a chunk boundary we'll - error out and reconnect, adding lots of latency.*/ - ret=op_http_parse_connection(cdr); - if(OP_UNLIKELY(ret<0))return ret; - pipeline_disabled|=ret; - } - else if(strcmp(header,"server")==0){ - /*If we got a Server response header, and it wasn't from a known-bad - server, enable pipelining, as long as it's at least HTTP/1.1. - According to RFC 2145, the server is supposed to respond with the - highest minor version number it supports unless it is known or - suspected that we incorrectly implement the HTTP specification. - So it should send back at least HTTP/1.1, despite our HTTP/1.0 - request.*/ - pipeline_supported=v1_1_compat; - if(v1_1_compat)pipeline_disabled|=!op_http_allow_pipelining(cdr); - if(_info!=NULL&&_info->server==NULL)_info->server=op_string_dup(cdr); - } - /*Collect station information headers if the caller requested it. - If there's more than one copy of a header, the first one wins.*/ - else if(_info!=NULL){ - if(strcmp(header,"content-type")==0){ - if(_info->content_type==NULL){ - _info->content_type=op_string_dup(cdr); - } - } - else if(header[0]=='i'&&header[1]=='c' - &&(header[2]=='e'||header[2]=='y')&&header[3]=='-'){ - if(strcmp(header+4,"name")==0){ - if(_info->name==NULL)_info->name=op_string_dup(cdr); - } - else if(strcmp(header+4,"description")==0){ - if(_info->description==NULL)_info->description=op_string_dup(cdr); - } - else if(strcmp(header+4,"genre")==0){ - if(_info->genre==NULL)_info->genre=op_string_dup(cdr); - } - else if(strcmp(header+4,"url")==0){ - if(_info->url==NULL)_info->url=op_string_dup(cdr); - } - else if(strcmp(header,"icy-br")==0 - ||strcmp(header,"ice-bitrate")==0){ - if(_info->bitrate_kbps<0){ - opus_int64 bitrate_kbps; - /*Just re-using this function to parse a random unsigned - integer field.*/ - bitrate_kbps=op_http_parse_content_length(cdr); - if(bitrate_kbps>=0&&bitrate_kbps<=OP_INT32_MAX){ - _info->bitrate_kbps=(opus_int32)bitrate_kbps; - } - } - } - else if(strcmp(header,"icy-pub")==0 - ||strcmp(header,"ice-public")==0){ - if(_info->is_public<0&&(cdr[0]=='0'||cdr[0]=='1')&&cdr[1]=='\0'){ - _info->is_public=cdr[0]-'0'; - } - } - } - } - } - switch(status_code[2]){ - /*200 OK*/ - case '0':break; - /*203 Non-Authoritative Information*/ - case '3':break; - /*204 No Content*/ - case '4':{ - if(content_length>=0&&OP_UNLIKELY(content_length!=0)){ - return OP_FALSE; - } - }break; - /*206 Partial Content*/ - case '6':{ - /*No Content-Range header.*/ - if(OP_UNLIKELY(range_length<0))return OP_FALSE; - content_length=range_length; - /*The server supports range requests for this resource. - We can seek.*/ - _stream->seekable=1; - }break; - /*201 Created: the response "SHOULD include an entity containing a list - of resource characteristics and location(s)," but not an Opus file. - 202 Accepted: the response "SHOULD include an indication of request's - current status and either a pointer to a status monitor or some - estimate of when the user can expect the request to be fulfilled," - but not an Opus file. - 205 Reset Content: this "MUST NOT include an entity," meaning no Opus - file. - 207...209 are not yet defined, so we don't know how to handle them.*/ - default:return OP_FALSE; - } - _stream->content_length=content_length; - _stream->pipeline=pipeline_supported&&!pipeline_disabled; - /*Pipelining requires HTTP/1.1 persistent connections.*/ - if(_stream->pipeline)_stream->request.buf[minor_version_pos]='1'; - _stream->conns[0].pos=0; - _stream->conns[0].end_pos=_stream->seekable?content_length:-1; - _stream->conns[0].chunk_size=-1; - _stream->cur_conni=0; - _stream->connect_rate=op_time_diff_ms(&end_time,&start_time); - _stream->connect_rate=OP_MAX(_stream->connect_rate,1); - if(_info!=NULL)_info->is_ssl=OP_URL_IS_SSL(&_stream->url); - /*The URL has been successfully opened.*/ - return 0; - } - /*Shouldn't get 1xx; 4xx and 5xx are both failures (and we don't retry). - Everything else is undefined.*/ - else if(status_code[0]!='3')return OP_FALSE; - /*We have some form of redirect request.*/ - /*We only understand 30x codes.*/ - if(status_code[1]!='0')return OP_FALSE; - switch(status_code[2]){ - /*300 Multiple Choices: "If the server has a preferred choice of - representation, it SHOULD include the specific URI for that - representation in the Location field," otherwise we'll fail.*/ - case '0': - /*301 Moved Permanently*/ - case '1': - /*302 Found*/ - case '2': - /*307 Temporary Redirect*/ - case '7': - /*308 Permanent Redirect (defined by draft-reschke-http-status-308-07).*/ - case '8':break; - /*305 Use Proxy: "The Location field gives the URI of the proxy." - TODO: This shouldn't actually be that hard to do.*/ - case '5':return OP_EIMPL; - /*303 See Other: "The new URI is not a substitute reference for the - originally requested resource." - 304 Not Modified: "The 304 response MUST NOT contain a message-body." - 306 (Unused) - 309 is not yet defined, so we don't know how to handle it.*/ - default:return OP_FALSE; - } - _url=NULL; - for(;;){ - char *header; - char *cdr; - ret=op_http_get_next_header(&header,&cdr,&next); - if(OP_UNLIKELY(ret<0))return ret; - if(header==NULL)break; - if(strcmp(header,"location")==0&&OP_LIKELY(_url==NULL))_url=cdr; - } - if(OP_UNLIKELY(_url==NULL))return OP_FALSE; - ret=op_parse_url(&next_url,_url); - if(OP_UNLIKELY(ret<0))return ret; - if(_proxy_host==NULL||_stream->ssl_session!=NULL){ - if(strcmp(_stream->url.host,next_url.host)==0 - &&_stream->url.port==next_url.port){ - /*Try to skip re-resolve when connecting to the same host.*/ - addrs=&_stream->addr_info; - } - else{ - if(_stream->ssl_session!=NULL){ - /*Forget any cached SSL session from the last host.*/ - SSL_SESSION_free(_stream->ssl_session); - _stream->ssl_session=NULL; - } - } - } - if(_proxy_host==NULL){ - OP_ASSERT(_stream->connect_host==_stream->url.host); - _stream->connect_host=next_url.host; - _stream->connect_port=next_url.port; - } - /*Always try to skip re-resolve for proxy connections.*/ - else addrs=&_stream->addr_info; - op_parsed_url_clear(&_stream->url); - *&_stream->url=*&next_url; - /*TODO: On servers/proxies that support pipelining, we might be able to - re-use this connection.*/ - op_http_conn_close(_stream,_stream->conns+0,&_stream->lru_head,1); - } - /*Redirection limit reached.*/ - return OP_FALSE; -} - -static int op_http_conn_send_request(OpusHTTPStream *_stream, - OpusHTTPConn *_conn,opus_int64 _pos,opus_int32 _chunk_size, - int _try_not_to_block){ - opus_int64 next_end; - int ret; - /*We shouldn't have another request outstanding.*/ - OP_ASSERT(_conn->next_pos<0); - /*Build the request to send.*/ - OP_ASSERT(_stream->request.nbuf>=_stream->request_tail); - _stream->request.nbuf=_stream->request_tail; - ret=op_sb_append_nonnegative_int64(&_stream->request,_pos); - ret|=op_sb_append(&_stream->request,"-",1); - if(_chunk_size>0&&OP_ADV_OFFSET(_pos,2*_chunk_size)<_stream->content_length){ - /*We shouldn't be pipelining requests with non-HTTP/1.1 servers.*/ - OP_ASSERT(_stream->pipeline); - next_end=_pos+_chunk_size; - ret|=op_sb_append_nonnegative_int64(&_stream->request,next_end-1); - /*Use a larger chunk size for our next request.*/ - _chunk_size<<=1; - /*But after a while, just request the rest of the resource.*/ - if(_chunk_size>OP_PIPELINE_CHUNK_SIZE_MAX)_chunk_size=-1; - } - else{ - /*Either this was a non-pipelined request or we were close enough to the - end to just ask for the rest.*/ - next_end=-1; - _chunk_size=-1; - } - ret|=op_sb_append(&_stream->request,"\r\n\r\n",4); - if(OP_UNLIKELY(ret<0))return ret; - /*If we don't want to block, check to see if there's enough space in the send - queue. - There's still a chance we might block, even if there is enough space, but - it's a much slimmer one. - Blocking at all is pretty unlikely, as we won't have any requests queued - when _try_not_to_block is set, so if FIONSPACE isn't available (e.g., on - Linux), just skip the test.*/ - if(_try_not_to_block){ -# if defined(FIONSPACE) - int available; - ret=ioctl(_conn->fd,FIONSPACE,&available); - if(ret<0||available<_stream->request.nbuf)return 1; -# endif - } - ret=op_http_conn_write_fully(_conn, - _stream->request.buf,_stream->request.nbuf); - if(OP_UNLIKELY(ret<0))return ret; - _conn->next_pos=_pos; - _conn->next_end=next_end; - /*Save the chunk size to use for the next request.*/ - _conn->chunk_size=_chunk_size; - _conn->nrequests_left--; - return ret; -} - -/*Handles the response to all requests after the first one. - Return: 1 if the connection was closed or timed out, 0 on success, or a - negative value on any other error.*/ -static int op_http_conn_handle_response(OpusHTTPStream *_stream, - OpusHTTPConn *_conn){ - char *next; - char *status_code; - opus_int64 range_length; - opus_int64 next_pos; - opus_int64 next_end; - int ret; - ret=op_http_conn_read_response(_conn,&_stream->response); - /*If the server just closed the connection on us, we may have just hit a - connection re-use limit, so we might want to retry.*/ - if(OP_UNLIKELY(ret<0))return ret==OP_EREAD?1:ret; - next=op_http_parse_status_line(NULL,&status_code,_stream->response.buf); - if(OP_UNLIKELY(next==NULL))return OP_FALSE; - /*We _need_ a 206 Partial Content response. - Nothing else will do.*/ - if(strncmp(status_code,"206",3)!=0){ - /*But on a 408 Request Timeout, we might want to re-try.*/ - return strncmp(status_code,"408",3)==0?1:OP_FALSE; - } - next_pos=_conn->next_pos; - next_end=_conn->next_end; - range_length=-1; - for(;;){ - char *header; - char *cdr; - ret=op_http_get_next_header(&header,&cdr,&next); - if(OP_UNLIKELY(ret<0))return ret; - if(header==NULL)break; - if(strcmp(header,"content-range")==0){ - opus_int64 range_first; - opus_int64 range_last; - /*Two Content-Range headers?*/ - if(OP_UNLIKELY(range_length>=0))return OP_FALSE; - ret=op_http_parse_content_range(&range_first,&range_last, - &range_length,cdr); - if(OP_UNLIKELY(ret<0))return ret; - /*"A response with satus code 206 (Partial Content) MUST NOT - include a Content-Range field with a byte-range-resp-spec of - '*'."*/ - if(OP_UNLIKELY(range_first<0)||OP_UNLIKELY(range_last<0))return OP_FALSE; - /*We also don't want range_last to overflow.*/ - if(OP_UNLIKELY(range_last>=OP_INT64_MAX))return OP_FALSE; - range_last++; - /*Quit if we didn't get the offset we asked for.*/ - if(range_first!=next_pos)return OP_FALSE; - if(next_end<0){ - /*We asked for the rest of the resource.*/ - if(range_length>=0){ - /*Quit if we didn't get it.*/ - if(OP_UNLIKELY(range_last!=range_length))return OP_FALSE; - } - /*If there was no length, use the end of the range.*/ - else range_length=range_last; - next_end=range_last; - } - else{ - if(range_last!=next_end)return OP_FALSE; - /*If there was no length, use the larger of the content length or the - end of this chunk.*/ - if(range_length<0){ - range_length=OP_MAX(range_last,_stream->content_length); - } - } - } - else if(strcmp(header,"content-length")==0){ - opus_int64 content_length; - /*Validate the Content-Length header, if present, against the request we - made.*/ - content_length=op_http_parse_content_length(cdr); - if(OP_UNLIKELY(content_length<0))return (int)content_length; - if(next_end<0){ - /*If we haven't seen the Content-Range header yet and we asked for the - rest of the resource, set next_end, so we can make sure they match - when we do find the Content-Range header.*/ - if(OP_UNLIKELY(next_pos>OP_INT64_MAX-content_length))return OP_FALSE; - next_end=next_pos+content_length; - } - /*Otherwise, make sure they match now.*/ - else if(OP_UNLIKELY(next_end-next_pos!=content_length))return OP_FALSE; - } - else if(strcmp(header,"connection")==0){ - ret=op_http_parse_connection(cdr); - if(OP_UNLIKELY(ret<0))return ret; - /*If the server told us it was going to close the connection, don't make - any more requests.*/ - if(OP_UNLIKELY(ret>0))_conn->nrequests_left=0; - } - } - /*No Content-Range header.*/ - if(OP_UNLIKELY(range_length<0))return OP_FALSE; - /*Update the content_length if necessary.*/ - _stream->content_length=range_length; - _conn->pos=next_pos; - _conn->end_pos=next_end; - _conn->next_pos=-1; - return 0; -} - -/*Open a new connection that will start reading at byte offset _pos. - _pos: The byte offset to start reading from. - _chunk_size: The number of bytes to ask for in the initial request, or -1 to - request the rest of the resource. - This may be more bytes than remain, in which case it will be - converted into a request for the rest.*/ -static int op_http_conn_open_pos(OpusHTTPStream *_stream, - OpusHTTPConn *_conn,opus_int64 _pos,opus_int32 _chunk_size){ - struct timeb start_time; - struct timeb end_time; - opus_int32 connect_rate; - opus_int32 connect_time; - int ret; - ret=op_http_connect(_stream,_conn,&_stream->addr_info,&start_time); - if(OP_UNLIKELY(ret<0))return ret; - ret=op_http_conn_send_request(_stream,_conn,_pos,_chunk_size,0); - if(OP_UNLIKELY(ret<0))return ret; - ret=op_http_conn_handle_response(_stream,_conn); - if(OP_UNLIKELY(ret!=0))return OP_FALSE; - ftime(&end_time); - _stream->cur_conni=_conn-_stream->conns; - OP_ASSERT(_stream->cur_conni>=0&&_stream->cur_conni<OP_NCONNS_MAX); - /*The connection has been successfully opened. - Update the connection time estimate.*/ - connect_time=op_time_diff_ms(&end_time,&start_time); - connect_rate=_stream->connect_rate; - connect_rate+=OP_MAX(connect_time,1)-connect_rate+8>>4; - _stream->connect_rate=connect_rate; - return 0; -} - -/*Read data from the current response body. - If we're pipelining and we get close to the end of this response, queue - another request. - If we've reached the end of this response body, parse the next response and - keep going. - [out] _buf: Returns the data read. - _buf_size: The size of the buffer. - Return: A positive number of bytes read on success. - 0: The connection was closed. - OP_EREAD: There was a fatal read error.*/ -static int op_http_conn_read_body(OpusHTTPStream *_stream, - OpusHTTPConn *_conn,unsigned char *_buf,int _buf_size){ - opus_int64 pos; - opus_int64 end_pos; - opus_int64 next_pos; - opus_int64 content_length; - int nread; - int pipeline; - int ret; - /*Currently this function can only be called on the LRU head. - Otherwise, we'd need a _pnext pointer if we needed to close the connection, - and re-opening it would re-organize the lists.*/ - OP_ASSERT(_stream->lru_head==_conn); - /*We should have filterd out empty reads by this point.*/ - OP_ASSERT(_buf_size>0); - pos=_conn->pos; - end_pos=_conn->end_pos; - next_pos=_conn->next_pos; - pipeline=_stream->pipeline; - content_length=_stream->content_length; - if(end_pos>=0){ - /*Have we reached the end of the current response body?*/ - if(pos>=end_pos){ - OP_ASSERT(content_length>=0); - /*If this was the end of the stream, we're done. - Also return early if a non-blocking read was requested (regardless of - whether we might be able to parse the next response without - blocking).*/ - if(content_length<=end_pos)return 0; - /*Otherwise, start on the next response.*/ - if(next_pos<0){ - /*We haven't issued another request yet.*/ - if(!pipeline||_conn->nrequests_left<=0){ - /*There are two ways to get here: either the server told us it was - going to close the connection after the last request, or we - thought we were reading the whole resource, but it grew while we - were reading it. - The only way the latter could have happened is if content_length - changed while seeking. - Open a new request to read the rest.*/ - OP_ASSERT(_stream->seekable); - /*Try to open a new connection to read another chunk.*/ - op_http_conn_close(_stream,_conn,&_stream->lru_head,1); - /*If we're not pipelining, we should be requesting the rest.*/ - OP_ASSERT(pipeline||_conn->chunk_size==-1); - ret=op_http_conn_open_pos(_stream,_conn,end_pos,_conn->chunk_size); - if(OP_UNLIKELY(ret<0))return OP_EREAD; - } - else{ - /*Issue the request now (better late than never).*/ - ret=op_http_conn_send_request(_stream,_conn,pos,_conn->chunk_size,0); - if(OP_UNLIKELY(ret<0))return OP_EREAD; - next_pos=_conn->next_pos; - OP_ASSERT(next_pos>=0); - } - } - if(next_pos>=0){ - /*We shouldn't be trying to read past the current request body if we're - seeking somewhere else.*/ - OP_ASSERT(next_pos==end_pos); - ret=op_http_conn_handle_response(_stream,_conn); - if(OP_UNLIKELY(ret<0))return OP_EREAD; - if(OP_UNLIKELY(ret>0)&&pipeline){ - opus_int64 next_end; - next_end=_conn->next_end; - /*Our request timed out or the server closed the connection. - Try re-connecting.*/ - op_http_conn_close(_stream,_conn,&_stream->lru_head,1); - /*Unless there's a bug, we should be able to convert - (next_pos,next_end) into valid (_pos,_chunk_size) parameters.*/ - OP_ASSERT(next_end<0 - ||next_end-next_pos>=0&&next_end-next_pos<=OP_INT32_MAX); - ret=op_http_conn_open_pos(_stream,_conn,next_pos, - next_end<0?-1:(opus_int32)(next_end-next_pos)); - if(OP_UNLIKELY(ret<0))return OP_EREAD; - } - else if(OP_UNLIKELY(ret!=0))return OP_EREAD; - } - pos=_conn->pos; - end_pos=_conn->end_pos; - content_length=_stream->content_length; - } - OP_ASSERT(end_pos>pos); - _buf_size=OP_MIN(_buf_size,end_pos-pos); - } - nread=op_http_conn_read(_conn,(char *)_buf,_buf_size,1); - if(OP_UNLIKELY(nread<0))return nread; - pos+=nread; - _conn->pos=pos; - OP_ASSERT(end_pos<0||content_length>=0); - /*TODO: If nrequests_left<=0, we can't make a new request, and there will be - a big pause after we hit the end of the chunk while we open a new - connection. - It would be nice to be able to start that process now, but we have no way - to do it in the background without blocking (even if we could start it, we - have no guarantee the application will return control to us in a - sufficiently timely manner to allow us to complete it, and this is - uncommon enough that it's not worth using threads just for this).*/ - if(end_pos>=0&&end_pos<content_length&&next_pos<0 - &&pipeline&&OP_LIKELY(_conn->nrequests_left>0)){ - opus_int64 request_thresh; - opus_int32 chunk_size; - /*Are we getting close to the end of the current response body? - If so, we should request more data.*/ - request_thresh=_stream->connect_rate*_conn->read_rate>>12; - /*But don't commit ourselves too quickly.*/ - chunk_size=_conn->chunk_size; - if(chunk_size>=0)request_thresh=OP_MIN(chunk_size>>2,request_thresh); - if(end_pos-pos<request_thresh){ - ret=op_http_conn_send_request(_stream,_conn,end_pos,_conn->chunk_size,1); - if(OP_UNLIKELY(ret<0))return OP_EREAD; - } - } - return nread; -} - -static int op_http_stream_read(void *_stream, - unsigned char *_ptr,int _buf_size){ - OpusHTTPStream *stream; - ptrdiff_t nread; - opus_int64 size; - opus_int64 pos; - int ci; - stream=(OpusHTTPStream *)_stream; - /*Check for an empty read.*/ - if(_buf_size<=0)return 0; - ci=stream->cur_conni; - /*No current connection => EOF.*/ - if(ci<0)return 0; - pos=stream->conns[ci].pos; - size=stream->content_length; - /*Check for EOF.*/ - if(size>=0){ - if(pos>=size)return 0; - /*Check for a short read.*/ - if(_buf_size>size-pos)_buf_size=(int)(size-pos); - } - nread=op_http_conn_read_body(stream,stream->conns+ci,_ptr,_buf_size); - if(OP_UNLIKELY(nread<=0)){ - /*We hit an error or EOF. - Either way, we're done with this connection.*/ - op_http_conn_close(stream,stream->conns+ci,&stream->lru_head,1); - stream->cur_conni=-1; - stream->pos=pos; - } - return nread; -} - -/*Discard data until we reach the _target position. - This destroys the contents of _stream->response.buf, as we need somewhere to - read this data, and that is a convenient place. - _just_read_ahead: Whether or not this is a plain fast-forward. - If 0, we need to issue a new request for a chunk at _target - and discard all the data from our current request(s). - Otherwise, we should be able to reach _target without - issuing any new requests. - _target: The stream position to which to read ahead.*/ -static int op_http_conn_read_ahead(OpusHTTPStream *_stream, - OpusHTTPConn *_conn,int _just_read_ahead,opus_int64 _target){ - opus_int64 pos; - opus_int64 end_pos; - opus_int64 next_pos; - opus_int64 next_end; - ptrdiff_t nread; - int ret; - pos=_conn->pos; - end_pos=_conn->end_pos; - next_pos=_conn->next_pos; - next_end=_conn->next_end; - if(!_just_read_ahead){ - /*We need to issue a new pipelined request. - This is the only case where we allow more than one outstanding request - at a time, so we need to reset next_pos (we'll restore it below if we - did have an outstanding request).*/ - OP_ASSERT(_stream->pipeline); - _conn->next_pos=-1; - ret=op_http_conn_send_request(_stream,_conn,_target, - OP_PIPELINE_CHUNK_SIZE,0); - if(OP_UNLIKELY(ret<0))return ret; - } - /*We can reach the target position by reading forward in the current chunk.*/ - if(_just_read_ahead&&(end_pos<0||_target<end_pos))end_pos=_target; - else if(next_pos>=0){ - opus_int64 next_next_pos; - opus_int64 next_next_end; - /*We already have a request outstanding. - Finish off the current chunk.*/ - while(pos<end_pos){ - nread=op_http_conn_read(_conn,_stream->response.buf, - (int)OP_MIN(end_pos-pos,_stream->response.cbuf),1); - /*We failed to read ahead.*/ - if(nread<=0)return OP_FALSE; - pos+=nread; - } - OP_ASSERT(pos==end_pos); - if(_just_read_ahead){ - next_next_pos=next_next_end=-1; - end_pos=_target; - } - else{ - OP_ASSERT(_conn->next_pos==_target); - next_next_pos=_target; - next_next_end=_conn->next_end; - _conn->next_pos=next_pos; - _conn->next_end=next_end; - end_pos=next_end; - } - ret=op_http_conn_handle_response(_stream,_conn); - if(OP_UNLIKELY(ret!=0))return OP_FALSE; - _conn->next_pos=next_next_pos; - _conn->next_end=next_next_end; - } - while(pos<end_pos){ - nread=op_http_conn_read(_conn,_stream->response.buf, - (int)OP_MIN(end_pos-pos,_stream->response.cbuf),1); - /*We failed to read ahead.*/ - if(nread<=0)return OP_FALSE; - pos+=nread; - } - OP_ASSERT(pos==end_pos); - if(!_just_read_ahead){ - ret=op_http_conn_handle_response(_stream,_conn); - if(OP_UNLIKELY(ret!=0))return OP_FALSE; - } - else _conn->pos=end_pos; - OP_ASSERT(_conn->pos==_target); - return 0; -} - -static int op_http_stream_seek(void *_stream,opus_int64 _offset,int _whence){ - struct timeb seek_time; - OpusHTTPStream *stream; - OpusHTTPConn *conn; - OpusHTTPConn **pnext; - OpusHTTPConn *close_conn; - OpusHTTPConn **close_pnext; - opus_int64 content_length; - opus_int64 pos; - int pipeline; - int ci; - int ret; - stream=(OpusHTTPStream *)_stream; - if(!stream->seekable)return -1; - content_length=stream->content_length; - /*If we're seekable, we should have gotten a Content-Length.*/ - OP_ASSERT(content_length>=0); - ci=stream->cur_conni; - pos=ci<0?content_length:stream->conns[ci].pos; - switch(_whence){ - case SEEK_SET:{ - /*Check for overflow:*/ - if(_offset<0)return -1; - pos=_offset; - }break; - case SEEK_CUR:{ - /*Check for overflow:*/ - if(_offset<-pos||_offset>OP_INT64_MAX-pos)return -1; - pos+=_offset; - }break; - case SEEK_END:{ - /*Check for overflow:*/ - if(_offset>content_length||_offset<content_length-OP_INT64_MAX)return -1; - pos=content_length-_offset; - }break; - default:return -1; - } - /*Mark when we deactivated the active connection.*/ - if(ci>=0){ - op_http_conn_read_rate_update(stream->conns+ci); - *&seek_time=*&stream->conns[ci].read_time; - } - else ftime(&seek_time); - /*If we seeked past the end of the stream, just disable the active - connection.*/ - if(pos>=content_length){ - stream->cur_conni=-1; - stream->pos=pos; - return 0; - } - /*First try to find a connection we can use without waiting.*/ - pnext=&stream->lru_head; - conn=stream->lru_head; - while(conn!=NULL){ - opus_int64 conn_pos; - opus_int64 end_pos; - int available; - /*If this connection has been dormant too long or has made too many - requests, close it. - This is to prevent us from hitting server limits/firewall timeouts.*/ - if(op_time_diff_ms(&seek_time,&conn->read_time)> - OP_CONNECTION_IDLE_TIMEOUT_MS - ||conn->nrequests_left<OP_PIPELINE_MIN_REQUESTS){ - op_http_conn_close(stream,conn,pnext,1); - conn=*pnext; - continue; - } - available=op_http_conn_estimate_available(conn); - conn_pos=conn->pos; - end_pos=conn->end_pos; - if(conn->next_pos>=0){ - OP_ASSERT(end_pos>=0); - OP_ASSERT(conn->next_pos==end_pos); - end_pos=conn->next_end; - } - OP_ASSERT(end_pos<0||conn_pos<=end_pos); - /*Can we quickly read ahead without issuing a new request or waiting for - any more data? - If we have an oustanding request, we'll over-estimate the amount of data - it has available (because we'll count the response headers, too), but - that probably doesn't matter.*/ - if(conn_pos<=pos&&pos-conn_pos<=available&&(end_pos<0||pos<end_pos)){ - /*Found a suitable connection to re-use.*/ - ret=op_http_conn_read_ahead(stream,conn,1,pos); - if(OP_UNLIKELY(ret<0)){ - /*The connection might have become stale, so close it and keep going.*/ - op_http_conn_close(stream,conn,pnext,1); - conn=*pnext; - continue; - } - /*Sucessfully resurrected this connection.*/ - *pnext=conn->next; - conn->next=stream->lru_head; - stream->lru_head=conn; - stream->cur_conni=conn-stream->conns; - return 0; - } - pnext=&conn->next; - conn=conn->next; - } - /*Chances are that didn't work, so now try to find one we can use by reading - ahead a reasonable amount and/or by issuing a new request.*/ - close_pnext=NULL; - close_conn=NULL; - pnext=&stream->lru_head; - conn=stream->lru_head; - pipeline=stream->pipeline; - while(conn!=NULL){ - opus_int64 conn_pos; - opus_int64 end_pos; - opus_int64 read_ahead_thresh; - int available; - int just_read_ahead; - /*Dividing by 2048 instead of 1000 scales this by nearly 1/2, biasing away - from connection re-use (and roughly compensating for the lag required to - reopen the TCP window of a connection that's been idle). - There's no overflow checking here, because it's vanishingly unlikely, and - all it would do is cause us to make poor decisions.*/ - read_ahead_thresh=OP_MAX(OP_READAHEAD_THRESH_MIN, - stream->connect_rate*conn->read_rate>>11); - available=op_http_conn_estimate_available(conn); - conn_pos=conn->pos; - end_pos=conn->end_pos; - if(conn->next_pos>=0){ - OP_ASSERT(end_pos>=0); - OP_ASSERT(conn->next_pos==end_pos); - end_pos=conn->next_end; - } - OP_ASSERT(end_pos<0||conn_pos<=end_pos); - /*Can we quickly read ahead without issuing a new request?*/ - just_read_ahead=conn_pos<=pos&&pos-conn_pos-available<=read_ahead_thresh - &&(end_pos<0||pos<end_pos); - if(just_read_ahead||pipeline&&end_pos>=0 - &&end_pos-conn_pos-available<=read_ahead_thresh){ - /*Found a suitable connection to re-use.*/ - ret=op_http_conn_read_ahead(stream,conn,just_read_ahead,pos); - if(OP_UNLIKELY(ret<0)){ - /*The connection might have become stale, so close it and keep going.*/ - op_http_conn_close(stream,conn,pnext,1); - conn=*pnext; - continue; - } - /*Sucessfully resurrected this connection.*/ - *pnext=conn->next; - conn->next=stream->lru_head; - stream->lru_head=conn; - stream->cur_conni=conn-stream->conns; - return 0; - } - close_pnext=pnext; - close_conn=conn; - pnext=&conn->next; - conn=conn->next; - } - /*No suitable connections. - Open a new one.*/ - if(stream->free_head==NULL){ - /*All connections in use. - Expire one of them (we should have already picked which one when scanning - the list).*/ - OP_ASSERT(close_conn!=NULL); - OP_ASSERT(close_pnext!=NULL); - op_http_conn_close(stream,close_conn,close_pnext,1); - } - OP_ASSERT(stream->free_head!=NULL); - conn=stream->free_head; - /*If we can pipeline, only request a chunk of data. - If we're seeking now, there's a good chance we will want to seek again - soon, and this avoids committing this connection to reading the rest of - the stream. - Particularly with SSL or proxies, issuing a new request on the same - connection can be substantially faster than opening a new one. - This also limits the amount of data the server will blast at us on this - connection if we later seek elsewhere and start reading from a different - connection.*/ - ret=op_http_conn_open_pos(stream,conn,pos, - pipeline?OP_PIPELINE_CHUNK_SIZE:-1); - if(OP_UNLIKELY(ret<0)){ - op_http_conn_close(stream,conn,&stream->lru_head,1); - return -1; - } - return 0; -} - -static opus_int64 op_http_stream_tell(void *_stream){ - OpusHTTPStream *stream; - int ci; - stream=(OpusHTTPStream *)_stream; - ci=stream->cur_conni; - return ci<0?stream->pos:stream->conns[ci].pos; -} - -static int op_http_stream_close(void *_stream){ - OpusHTTPStream *stream; - stream=(OpusHTTPStream *)_stream; - if(OP_LIKELY(stream!=NULL)){ - op_http_stream_clear(stream); - _ogg_free(stream); - } - return 0; -} - -static const OpusFileCallbacks OP_HTTP_CALLBACKS={ - op_http_stream_read, - op_http_stream_seek, - op_http_stream_tell, - op_http_stream_close -}; -#endif - -void opus_server_info_init(OpusServerInfo *_info){ - _info->name=NULL; - _info->description=NULL; - _info->genre=NULL; - _info->url=NULL; - _info->server=NULL; - _info->content_type=NULL; - _info->bitrate_kbps=-1; - _info->is_public=-1; - _info->is_ssl=0; -} - -void opus_server_info_clear(OpusServerInfo *_info){ - _ogg_free(_info->content_type); - _ogg_free(_info->server); - _ogg_free(_info->url); - _ogg_free(_info->genre); - _ogg_free(_info->description); - _ogg_free(_info->name); -} - -/*The actual URL stream creation function. - This one isn't extensible like the application-level interface, but because - it isn't public, we're free to change it in the future.*/ -static void *op_url_stream_create_impl(OpusFileCallbacks *_cb,const char *_url, - int _skip_certificate_check,const char *_proxy_host,unsigned _proxy_port, - const char *_proxy_user,const char *_proxy_pass,OpusServerInfo *_info){ - const char *path; - /*Check to see if this is a valid file: URL.*/ - path=op_parse_file_url(_url); - if(path!=NULL){ - char *unescaped_path; - void *ret; - unescaped_path=op_string_dup(path); - if(OP_UNLIKELY(unescaped_path==NULL))return NULL; - ret=op_fopen(_cb,op_unescape_url_component(unescaped_path),"rb"); - _ogg_free(unescaped_path); - return ret; - } -#if defined(OP_ENABLE_HTTP) - /*If not, try http/https.*/ - else{ - OpusHTTPStream *stream; - int ret; - stream=(OpusHTTPStream *)_ogg_malloc(sizeof(*stream)); - if(OP_UNLIKELY(stream==NULL))return NULL; - op_http_stream_init(stream); - ret=op_http_stream_open(stream,_url,_skip_certificate_check, - _proxy_host,_proxy_port,_proxy_user,_proxy_pass,_info); - if(OP_UNLIKELY(ret<0)){ - op_http_stream_clear(stream); - _ogg_free(stream); - return NULL; - } - *_cb=*&OP_HTTP_CALLBACKS; - return stream; - } -#else - (void)_skip_certificate_check; - (void)_proxy_host; - (void)_proxy_port; - (void)_proxy_user; - (void)_proxy_pass; - (void)_info; - return NULL; -#endif -} - -/*The actual implementation of op_url_stream_vcreate(). - We have to do a careful dance here to avoid potential memory leaks if - OpusServerInfo is requested, since this function is also used by - op_vopen_url() and op_vtest_url(). - Even if this function succeeds, those functions might ultimately fail. - If they do, they should return without having touched the OpusServerInfo - passed by the application. - Therefore, if this function succeeds and OpusServerInfo is requested, the - actual info will be stored in *_info and a pointer to the application's - storage will be placed in *_pinfo. - If this function fails or if the application did not request OpusServerInfo, - *_pinfo will be NULL. - Our caller is responsible for copying *_info to **_pinfo if it ultimately - succeeds, or for clearing *_info if it ultimately fails.*/ -void *op_url_stream_vcreate_impl(OpusFileCallbacks *_cb, - const char *_url,OpusServerInfo *_info,OpusServerInfo **_pinfo,va_list _ap){ - int skip_certificate_check; - const char *proxy_host; - opus_int32 proxy_port; - const char *proxy_user; - const char *proxy_pass; - OpusServerInfo *pinfo; - skip_certificate_check=0; - proxy_host=NULL; - proxy_port=8080; - proxy_user=NULL; - proxy_pass=NULL; - pinfo=NULL; - for(;;){ - ptrdiff_t request; - request=va_arg(_ap,char *)-(char *)NULL; - /*If we hit NULL, we're done processing options.*/ - if(!request)break; - switch(request){ - case OP_SSL_SKIP_CERTIFICATE_CHECK_REQUEST:{ - skip_certificate_check=!!va_arg(_ap,opus_int32); - }break; - case OP_HTTP_PROXY_HOST_REQUEST:{ - proxy_host=va_arg(_ap,const char *); - }break; - case OP_HTTP_PROXY_PORT_REQUEST:{ - proxy_port=va_arg(_ap,opus_int32); - if(proxy_port<0||proxy_port>(opus_int32)65535)return NULL; - }break; - case OP_HTTP_PROXY_USER_REQUEST:{ - proxy_user=va_arg(_ap,const char *); - }break; - case OP_HTTP_PROXY_PASS_REQUEST:{ - proxy_pass=va_arg(_ap,const char *); - }break; - case OP_GET_SERVER_INFO_REQUEST:{ - pinfo=va_arg(_ap,OpusServerInfo *); - }break; - /*Some unknown option.*/ - default:return NULL; - } - } - /*If the caller has requested server information, proxy it to a local copy to - simplify error handling.*/ - *_pinfo=NULL; - if(pinfo!=NULL){ - void *ret; - opus_server_info_init(_info); - ret=op_url_stream_create_impl(_cb,_url,skip_certificate_check, - proxy_host,proxy_port,proxy_user,proxy_pass,_info); - if(ret!=NULL)*_pinfo=pinfo; - else opus_server_info_clear(_info); - return ret; - } - return op_url_stream_create_impl(_cb,_url,skip_certificate_check, - proxy_host,proxy_port,proxy_user,proxy_pass,NULL); -} - -void *op_url_stream_vcreate(OpusFileCallbacks *_cb, - const char *_url,va_list _ap){ - OpusServerInfo info; - OpusServerInfo *pinfo; - void *ret; - ret=op_url_stream_vcreate_impl(_cb,_url,&info,&pinfo,_ap); - if(pinfo!=NULL)*pinfo=*&info; - return ret; -} - -void *op_url_stream_create(OpusFileCallbacks *_cb, - const char *_url,...){ - va_list ap; - void *ret; - va_start(ap,_url); - ret=op_url_stream_vcreate(_cb,_url,ap); - va_end(ap); - return ret; -} - -/*Convenience routines to open/test URLs in a single step.*/ - -OggOpusFile *op_vopen_url(const char *_url,int *_error,va_list _ap){ - OpusFileCallbacks cb; - OggOpusFile *of; - OpusServerInfo info; - OpusServerInfo *pinfo; - void *source; - source=op_url_stream_vcreate_impl(&cb,_url,&info,&pinfo,_ap); - if(OP_UNLIKELY(source==NULL)){ - OP_ASSERT(pinfo==NULL); - if(_error!=NULL)*_error=OP_EFAULT; - return NULL; - } - of=op_open_callbacks(source,&cb,NULL,0,_error); - if(OP_UNLIKELY(of==NULL)){ - if(pinfo!=NULL)opus_server_info_clear(&info); - (*cb.close)(source); - } - else if(pinfo!=NULL)*pinfo=*&info; - return of; -} - -OggOpusFile *op_open_url(const char *_url,int *_error,...){ - OggOpusFile *ret; - va_list ap; - va_start(ap,_error); - ret=op_vopen_url(_url,_error,ap); - va_end(ap); - return ret; -} - -OggOpusFile *op_vtest_url(const char *_url,int *_error,va_list _ap){ - OpusFileCallbacks cb; - OggOpusFile *of; - OpusServerInfo info; - OpusServerInfo *pinfo; - void *source; - source=op_url_stream_vcreate_impl(&cb,_url,&info,&pinfo,_ap); - if(OP_UNLIKELY(source==NULL)){ - OP_ASSERT(pinfo==NULL); - if(_error!=NULL)*_error=OP_EFAULT; - return NULL; - } - of=op_test_callbacks(source,&cb,NULL,0,_error); - if(OP_UNLIKELY(of==NULL)){ - if(pinfo!=NULL)opus_server_info_clear(&info); - (*cb.close)(source); - } - else if(pinfo!=NULL)*pinfo=*&info; - return of; -} - -OggOpusFile *op_test_url(const char *_url,int *_error,...){ - OggOpusFile *ret; - va_list ap; - va_start(ap,_error); - ret=op_vtest_url(_url,_error,ap); - va_end(ap); - return ret; -} |