1 files changed, 293 insertions, 0 deletions
diff --git a/drivers/gles2/shaders/ssao.glsl b/drivers/gles2/shaders/ssao.glsl
new file mode 100644
index 0000000000..219f0957e0
--- /dev/null
+++ b/drivers/gles2/shaders/ssao.glsl
@@ -0,0 +1,293 @@
+[vertex]
+
+
+layout(location=0) in highp vec4 vertex_attrib;
+
+void main() {
+
+	gl_Position = vertex_attrib;
+	gl_Position.z=1.0;
+}
+
+[fragment]
+
+#define TWO_PI 6.283185307179586476925286766559
+
+#ifdef SSAO_QUALITY_HIGH
+
+#define NUM_SAMPLES (80)
+
+#endif
+
+#ifdef SSAO_QUALITY_LOW
+
+#define NUM_SAMPLES (15)
+
+#endif
+
+#if !defined(SSAO_QUALITY_LOW) && !defined(SSAO_QUALITY_HIGH)
+
+#define NUM_SAMPLES (40)
+
+#endif
+
+// If using depth mip levels, the log of the maximum pixel offset before we need to switch to a lower
+// miplevel to maintain reasonable spatial locality in the cache
+// If this number is too small (< 3), too many taps will land in the same pixel, and we'll get bad variance that manifests as flashing.
+// If it is too high (> 5), we'll get bad performance because we're not using the MIP levels effectively
+#define LOG_MAX_OFFSET (3)
+
+// This must be less than or equal to the MAX_MIP_LEVEL defined in SSAO.cpp
+#define MAX_MIP_LEVEL (4)
+
+// This is the number of turns around the circle that the spiral pattern makes.  This should be prime to prevent
+// taps from lining up.  This particular choice was tuned for NUM_SAMPLES == 9
+
+const int ROTATIONS[] = int[]( 1, 1, 2, 3, 2, 5, 2, 3, 2,
+3, 3, 5, 5, 3, 4, 7, 5, 5, 7,
+9, 8, 5, 5, 7, 7, 7, 8, 5, 8,
+11, 12, 7, 10, 13, 8, 11, 8, 7, 14,
+11, 11, 13, 12, 13, 19, 17, 13, 11, 18,
+19, 11, 11, 14, 17, 21, 15, 16, 17, 18,
+13, 17, 11, 17, 19, 18, 25, 18, 19, 19,
+29, 21, 19, 27, 31, 29, 21, 18, 17, 29,
+31, 31, 23, 18, 25, 26, 25, 23, 19, 34,
+19, 27, 21, 25, 39, 29, 17, 21, 27 );
+
+//#define NUM_SPIRAL_TURNS (7)
+const int NUM_SPIRAL_TURNS = ROTATIONS[NUM_SAMPLES-1];
+
+uniform sampler2D source_depth; //texunit:0
+uniform highp usampler2D source_depth_mipmaps; //texunit:1
+uniform sampler2D source_normal; //texunit:2
+
+uniform ivec2 screen_size;
+uniform float camera_z_far;
+uniform float camera_z_near;
+
+uniform float intensity_div_r6;
+uniform float radius;
+
+#ifdef ENABLE_RADIUS2
+uniform float intensity_div_r62;
+uniform float radius2;
+#endif
+
+uniform float bias;
+uniform float proj_scale;
+
+layout(location = 0) out float visibility;
+
+uniform vec4 proj_info;
+
+vec3 reconstructCSPosition(vec2 S, float z) {
+#ifdef USE_ORTHOGONAL_PROJECTION
+	return vec3((S.xy * proj_info.xy + proj_info.zw), z);
+#else
+	return vec3((S.xy * proj_info.xy + proj_info.zw) * z, z);
+
+#endif
+}
+
+vec3 getPosition(ivec2 ssP) {
+    vec3 P;
+    P.z = texelFetch(source_depth, ssP, 0).r;
+
+    P.z = P.z * 2.0 - 1.0;
+#ifdef USE_ORTHOGONAL_PROJECTION
+    P.z = ((P.z + (camera_z_far + camera_z_near)/(camera_z_far - camera_z_near)) * (camera_z_far - camera_z_near))/2.0;
+#else
+    P.z = 2.0 * camera_z_near * camera_z_far / (camera_z_far + camera_z_near - P.z * (camera_z_far - camera_z_near));
+#endif
+    P.z = -P.z;
+
+    // Offset to pixel center
+    P = reconstructCSPosition(vec2(ssP) + vec2(0.5), P.z);
+    return P;
+}
+
+/** Reconstructs screen-space unit normal from screen-space position */
+vec3 reconstructCSFaceNormal(vec3 C) {
+    return normalize(cross(dFdy(C), dFdx(C)));
+}
+
+
+
+/** Returns a unit vector and a screen-space radius for the tap on a unit disk (the caller should scale by the actual disk radius) */
+vec2 tapLocation(int sampleNumber, float spinAngle, out float ssR){
+    // Radius relative to ssR
+    float alpha = (float(sampleNumber) + 0.5) * (1.0 / float(NUM_SAMPLES));
+    float angle = alpha * (float(NUM_SPIRAL_TURNS) * 6.28) + spinAngle;
+
+    ssR = alpha;
+    return vec2(cos(angle), sin(angle));
+}
+
+
+/** Read the camera-space position of the point at screen-space pixel ssP + unitOffset * ssR.  Assumes length(unitOffset) == 1 */
+vec3 getOffsetPosition(ivec2 ssC, vec2 unitOffset, float ssR) {
+    // Derivation:
+    //  mipLevel = floor(log(ssR / MAX_OFFSET));
+	int mipLevel = clamp(int(floor(log2(ssR))) - LOG_MAX_OFFSET, 0, MAX_MIP_LEVEL);
+
+	ivec2 ssP = ivec2(ssR * unitOffset) + ssC;
+
+	vec3 P;
+
+	// We need to divide by 2^mipLevel to read the appropriately scaled coordinate from a MIP-map.
+	// Manually clamp to the texture size because texelFetch bypasses the texture unit
+	ivec2 mipP = clamp(ssP >> mipLevel, ivec2(0), (screen_size >> mipLevel) - ivec2(1));
+
+
+	if (mipLevel < 1) {
+		//read from depth buffer
+		P.z = texelFetch(source_depth, mipP, 0).r;
+		P.z = P.z * 2.0 - 1.0;
+#ifdef USE_ORTHOGONAL_PROJECTION
+		P.z = ((P.z + (camera_z_far + camera_z_near)/(camera_z_far - camera_z_near)) * (camera_z_far - camera_z_near))/2.0;
+#else
+		P.z = 2.0 * camera_z_near * camera_z_far / (camera_z_far + camera_z_near - P.z * (camera_z_far - camera_z_near));
+
+#endif
+		P.z = -P.z;
+
+	} else {
+		//read from mipmaps
+		uint d = texelFetch(source_depth_mipmaps, mipP, mipLevel-1).r;
+		P.z = -(float(d)/65535.0)*camera_z_far;
+	}
+
+
+	// Offset to pixel center
+	P = reconstructCSPosition(vec2(ssP) + vec2(0.5), P.z);
+
+	return P;
+}
+
+
+
+/** Compute the occlusion due to sample with index \a i about the pixel at \a ssC that corresponds
+    to camera-space point \a C with unit normal \a n_C, using maximum screen-space sampling radius \a ssDiskRadius
+
+    Note that units of H() in the HPG12 paper are meters, not
+    unitless.  The whole falloff/sampling function is therefore
+    unitless.  In this implementation, we factor out (9 / radius).
+
+    Four versions of the falloff function are implemented below
+*/
+float sampleAO(in ivec2 ssC, in vec3 C, in vec3 n_C, in float ssDiskRadius,in float p_radius, in int tapIndex, in float randomPatternRotationAngle) {
+    // Offset on the unit disk, spun for this pixel
+    float ssR;
+    vec2 unitOffset = tapLocation(tapIndex, randomPatternRotationAngle, ssR);
+    ssR *= ssDiskRadius;
+
+    // The occluding point in camera space
+    vec3 Q = getOffsetPosition(ssC, unitOffset, ssR);
+
+    vec3 v = Q - C;
+
+    float vv = dot(v, v);
+    float vn = dot(v, n_C);
+
+    const float epsilon = 0.01;
+    float radius2 = p_radius*p_radius;
+
+    // A: From the HPG12 paper
+    // Note large epsilon to avoid overdarkening within cracks
+    //return float(vv < radius2) * max((vn - bias) / (epsilon + vv), 0.0) * radius2 * 0.6;
+
+    // B: Smoother transition to zero (lowers contrast, smoothing out corners). [Recommended]
+    float f=max(radius2 - vv, 0.0);
+    return f * f * f * max((vn - bias) / (epsilon + vv), 0.0);
+
+    // C: Medium contrast (which looks better at high radii), no division.  Note that the
+    // contribution still falls off with radius^2, but we've adjusted the rate in a way that is
+    // more computationally efficient and happens to be aesthetically pleasing.
+    // return 4.0 * max(1.0 - vv * invRadius2, 0.0) * max(vn - bias, 0.0);
+
+    // D: Low contrast, no division operation
+    // return 2.0 * float(vv < radius * radius) * max(vn - bias, 0.0);
+}
+
+
+
+void main() {
+
+
+	// Pixel being shaded
+	ivec2 ssC = ivec2(gl_FragCoord.xy);
+
+	// World space point being shaded
+	vec3 C = getPosition(ssC);
+
+/*	if (C.z <= -camera_z_far*0.999) {
+	       // We're on the skybox
+	       visibility=1.0;
+	       return;
+	}*/
+
+	//visibility=-C.z/camera_z_far;
+	//return;
+#if 0
+	vec3 n_C = texelFetch(source_normal,ssC,0).rgb * 2.0 - 1.0;
+#else
+	vec3 n_C = reconstructCSFaceNormal(C);
+	n_C = -n_C;
+#endif
+
+	// Hash function used in the HPG12 AlchemyAO paper
+	float randomPatternRotationAngle = mod(float((3 * ssC.x ^ ssC.y + ssC.x * ssC.y) * 10), TWO_PI);
+
+	// Reconstruct normals from positions. These will lead to 1-pixel black lines
+	// at depth discontinuities, however the blur will wipe those out so they are not visible
+	// in the final image.
+
+	// Choose the screen-space sample radius
+	// proportional to the projected area of the sphere
+#ifdef USE_ORTHOGONAL_PROJECTION
+	float ssDiskRadius = -proj_scale * radius;
+#else
+	float ssDiskRadius = -proj_scale * radius / C.z;
+#endif
+	float sum = 0.0;
+	for (int i = 0; i < NUM_SAMPLES; ++i) {
+		sum += sampleAO(ssC, C, n_C, ssDiskRadius, radius,i, randomPatternRotationAngle);
+	}
+
+	float A = max(0.0, 1.0 - sum * intensity_div_r6 * (5.0 / float(NUM_SAMPLES)));
+
+#ifdef ENABLE_RADIUS2
+
+	//go again for radius2
+	randomPatternRotationAngle = mod(float((5 * ssC.x ^ ssC.y + ssC.x * ssC.y) * 11), TWO_PI);
+
+	// Reconstruct normals from positions. These will lead to 1-pixel black lines
+	// at depth discontinuities, however the blur will wipe those out so they are not visible
+	// in the final image.
+
+	// Choose the screen-space sample radius
+	// proportional to the projected area of the sphere
+	ssDiskRadius = -proj_scale * radius2 / C.z;
+
+	sum = 0.0;
+	for (int i = 0; i < NUM_SAMPLES; ++i) {
+		sum += sampleAO(ssC, C, n_C, ssDiskRadius,radius2, i, randomPatternRotationAngle);
+	}
+
+	A= min(A,max(0.0, 1.0 - sum * intensity_div_r62 * (5.0 / float(NUM_SAMPLES))));
+#endif
+	// Bilateral box-filter over a quad for free, respecting depth edges
+	// (the difference that this makes is subtle)
+	if (abs(dFdx(C.z)) < 0.02) {
+		A -= dFdx(A) * (float(ssC.x & 1) - 0.5);
+	}
+	if (abs(dFdy(C.z)) < 0.02) {
+		A -= dFdy(A) * (float(ssC.y & 1) - 0.5);
+	}
+
+	visibility = A;
+
+}
+
+
+