diff options
Diffstat (limited to 'drivers/builtin_openssl2/crypto/sha/asm/sha1-thumb.pl')
| -rw-r--r-- | drivers/builtin_openssl2/crypto/sha/asm/sha1-thumb.pl | 259 |
1 files changed, 0 insertions, 259 deletions
diff --git a/drivers/builtin_openssl2/crypto/sha/asm/sha1-thumb.pl b/drivers/builtin_openssl2/crypto/sha/asm/sha1-thumb.pl deleted file mode 100644 index 7c9ea9b029..0000000000 --- a/drivers/builtin_openssl2/crypto/sha/asm/sha1-thumb.pl +++ /dev/null @@ -1,259 +0,0 @@ -#!/usr/bin/env perl - -# ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== - -# sha1_block for Thumb. -# -# January 2007. -# -# The code does not present direct interest to OpenSSL, because of low -# performance. Its purpose is to establish _size_ benchmark. Pretty -# useless one I must say, because 30% or 88 bytes larger ARMv4 code -# [avialable on demand] is almost _twice_ as fast. It should also be -# noted that in-lining of .Lcommon and .Lrotate improves performance -# by over 40%, while code increases by only 10% or 32 bytes. But once -# again, the goal was to establish _size_ benchmark, not performance. - -$output=shift; -open STDOUT,">$output"; - -$inline=0; -#$cheat_on_binutils=1; - -$t0="r0"; -$t1="r1"; -$t2="r2"; -$a="r3"; -$b="r4"; -$c="r5"; -$d="r6"; -$e="r7"; -$K="r8"; # "upper" registers can be used in add/sub and mov insns -$ctx="r9"; -$inp="r10"; -$len="r11"; -$Xi="r12"; - -sub common { -<<___; - sub $t0,#4 - ldr $t1,[$t0] - add $e,$K @ E+=K_xx_xx - lsl $t2,$a,#5 - add $t2,$e - lsr $e,$a,#27 - add $t2,$e @ E+=ROR(A,27) - add $t2,$t1 @ E+=X[i] -___ -} -sub rotate { -<<___; - mov $e,$d @ E=D - mov $d,$c @ D=C - lsl $c,$b,#30 - lsr $b,$b,#2 - orr $c,$b @ C=ROR(B,2) - mov $b,$a @ B=A - add $a,$t2,$t1 @ A=E+F_xx_xx(B,C,D) -___ -} - -sub BODY_00_19 { -$code.=$inline?&common():"\tbl .Lcommon\n"; -$code.=<<___; - mov $t1,$c - eor $t1,$d - and $t1,$b - eor $t1,$d @ F_00_19(B,C,D) -___ -$code.=$inline?&rotate():"\tbl .Lrotate\n"; -} - -sub BODY_20_39 { -$code.=$inline?&common():"\tbl .Lcommon\n"; -$code.=<<___; - mov $t1,$b - eor $t1,$c - eor $t1,$d @ F_20_39(B,C,D) -___ -$code.=$inline?&rotate():"\tbl .Lrotate\n"; -} - -sub BODY_40_59 { -$code.=$inline?&common():"\tbl .Lcommon\n"; -$code.=<<___; - mov $t1,$b - and $t1,$c - mov $e,$b - orr $e,$c - and $e,$d - orr $t1,$e @ F_40_59(B,C,D) -___ -$code.=$inline?&rotate():"\tbl .Lrotate\n"; -} - -$code=<<___; -.text -.code 16 - -.global sha1_block_data_order -.type sha1_block_data_order,%function - -.align 2 -sha1_block_data_order: -___ -if ($cheat_on_binutils) { -$code.=<<___; -.code 32 - add r3,pc,#1 - bx r3 @ switch to Thumb ISA -.code 16 -___ -} -$code.=<<___; - push {r4-r7} - mov r3,r8 - mov r4,r9 - mov r5,r10 - mov r6,r11 - mov r7,r12 - push {r3-r7,lr} - lsl r2,#6 - mov $ctx,r0 @ save context - mov $inp,r1 @ save inp - mov $len,r2 @ save len - add $len,$inp @ $len to point at inp end - -.Lloop: - mov $Xi,sp - mov $t2,sp - sub $t2,#16*4 @ [3] -.LXload: - ldrb $a,[$t1,#0] @ $t1 is r1 and holds inp - ldrb $b,[$t1,#1] - ldrb $c,[$t1,#2] - ldrb $d,[$t1,#3] - lsl $a,#24 - lsl $b,#16 - lsl $c,#8 - orr $a,$b - orr $a,$c - orr $a,$d - add $t1,#4 - push {$a} - cmp sp,$t2 - bne .LXload @ [+14*16] - - mov $inp,$t1 @ update $inp - sub $t2,#32*4 - sub $t2,#32*4 - mov $e,#31 @ [+4] -.LXupdate: - ldr $a,[sp,#15*4] - ldr $b,[sp,#13*4] - ldr $c,[sp,#7*4] - ldr $d,[sp,#2*4] - eor $a,$b - eor $a,$c - eor $a,$d - ror $a,$e - push {$a} - cmp sp,$t2 - bne .LXupdate @ [+(11+1)*64] - - ldmia $t0!,{$a,$b,$c,$d,$e} @ $t0 is r0 and holds ctx - mov $t0,$Xi - - ldr $t2,.LK_00_19 - mov $t1,$t0 - sub $t1,#20*4 - mov $Xi,$t1 - mov $K,$t2 @ [+7+4] -.L_00_19: -___ - &BODY_00_19(); -$code.=<<___; - cmp $Xi,$t0 - bne .L_00_19 @ [+(2+9+4+2+8+2)*20] - - ldr $t2,.LK_20_39 - mov $t1,$t0 - sub $t1,#20*4 - mov $Xi,$t1 - mov $K,$t2 @ [+5] -.L_20_39_or_60_79: -___ - &BODY_20_39(); -$code.=<<___; - cmp $Xi,$t0 - bne .L_20_39_or_60_79 @ [+(2+9+3+2+8+2)*20*2] - cmp sp,$t0 - beq .Ldone @ [+2] - - ldr $t2,.LK_40_59 - mov $t1,$t0 - sub $t1,#20*4 - mov $Xi,$t1 - mov $K,$t2 @ [+5] -.L_40_59: -___ - &BODY_40_59(); -$code.=<<___; - cmp $Xi,$t0 - bne .L_40_59 @ [+(2+9+6+2+8+2)*20] - - ldr $t2,.LK_60_79 - mov $Xi,sp - mov $K,$t2 - b .L_20_39_or_60_79 @ [+4] -.Ldone: - mov $t0,$ctx - ldr $t1,[$t0,#0] - ldr $t2,[$t0,#4] - add $a,$t1 - ldr $t1,[$t0,#8] - add $b,$t2 - ldr $t2,[$t0,#12] - add $c,$t1 - ldr $t1,[$t0,#16] - add $d,$t2 - add $e,$t1 - stmia $t0!,{$a,$b,$c,$d,$e} @ [+20] - - add sp,#80*4 @ deallocate stack frame - mov $t0,$ctx @ restore ctx - mov $t1,$inp @ restore inp - cmp $t1,$len - beq .Lexit - b .Lloop @ [+6] total 3212 cycles -.Lexit: - pop {r2-r7} - mov r8,r2 - mov r9,r3 - mov r10,r4 - mov r11,r5 - mov r12,r6 - mov lr,r7 - pop {r4-r7} - bx lr -.align 2 -___ -$code.=".Lcommon:\n".&common()."\tmov pc,lr\n" if (!$inline); -$code.=".Lrotate:\n".&rotate()."\tmov pc,lr\n" if (!$inline); -$code.=<<___; -.align 2 -.LK_00_19: .word 0x5a827999 -.LK_20_39: .word 0x6ed9eba1 -.LK_40_59: .word 0x8f1bbcdc -.LK_60_79: .word 0xca62c1d6 -.size sha1_block_data_order,.-sha1_block_data_order -.asciz "SHA1 block transform for Thumb, CRYPTOGAMS by <appro\@openssl.org>" -___ - -print $code; -close STDOUT; # enforce flush |