diff options
Diffstat (limited to 'drivers/builtin_openssl2/crypto/crypto-lib.com')
| -rw-r--r-- | drivers/builtin_openssl2/crypto/crypto-lib.com | 1537 |
1 files changed, 0 insertions, 1537 deletions
diff --git a/drivers/builtin_openssl2/crypto/crypto-lib.com b/drivers/builtin_openssl2/crypto/crypto-lib.com deleted file mode 100644 index 1423cac288..0000000000 --- a/drivers/builtin_openssl2/crypto/crypto-lib.com +++ /dev/null @@ -1,1537 +0,0 @@ -$! -$! CRYPTO-LIB.COM -$! Written By: Robert Byer -$! Vice-President -$! A-Com Computing, Inc. -$! byer@mail.all-net.net -$! -$! Changes by Richard Levitte <richard@levitte.org> -$! Zoltan Arpadffy <arpadffy@polarhome.com> -$! -$! This command files compiles and creates the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" -$! library for OpenSSL. The "xxx" denotes the machine architecture, ALPHA, -$! IA64 or VAX. -$! -$! It was re-written so it would try to determine what "C" compiler to use -$! or you can specify which "C" compiler to use. -$! -$! Specify the following as P1 to build just that part or ALL to just -$! build everything. -$! -$! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. -$! APPS To just compile the [.xxx.EXE.CRYPTO]*.EXE -$! ALL To do both LIBRARY and APPS -$! -$! Specify DEBUG or NODEBUG as P2 to compile with or without debugger -$! information. -$! -$! Specify which compiler at P3 to try to compile under. -$! -$! VAXC For VAX C. -$! DECC For DEC C. -$! GNUC For GNU C. -$! -$! If you don't specify a compiler, it will try to determine which -$! "C" compiler to use. -$! -$! P4, if defined, sets a TCP/IP library to use, through one of the following -$! keywords: -$! -$! UCX For UCX -$! TCPIP For TCPIP (post UCX) -$! SOCKETSHR For SOCKETSHR+NETLIB -$! -$! P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) -$! -$! P6, if defined, sets a choice of crypto methods to compile. -$! WARNING: this should only be done to recompile some part of an already -$! fully compiled library. -$! -$! P7, if defined, specifies the C pointer size. Ignored on VAX. -$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.) -$! Supported values are: -$! -$! "" Compile with default (/NOPOINTER_SIZE) -$! 32 Compile with /POINTER_SIZE=32 (SHORT) -$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]). -$! (Automatically select ARGV if compiler supports it.) -$! 64= Compile with /POINTER_SIZE=64 (LONG). -$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV). -$! -$! P8, if defined, specifies a directory where ZLIB files (zlib.h, -$! libz.olb) may be found. Optionally, a non-default object library -$! name may be included ("dev:[dir]libz_64.olb", for example). -$! -$! -$! Announce/identify. -$! -$ proc = f$environment( "procedure") -$ write sys$output "@@@ "+ - - f$parse( proc, , , "name")+ f$parse( proc, , , "type") -$! -$! Define A TCP/IP Library That We Will Need To Link To. -$! (That Is, If We Need To Link To One.) -$! -$ TCPIP_LIB = "" -$ ZLIB_LIB = "" -$! -$! Check Which Architecture We Are Using. -$! -$ IF (F$GETSYI("CPU").LT.128) -$ THEN -$! -$! The Architecture Is VAX -$! -$ ARCH = "VAX" -$! -$! Else... -$! -$ ELSE -$! -$! The Architecture Is Alpha, IA64 or whatever comes in the future. -$! -$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") -$ IF (ARCH .EQS. "") THEN ARCH = "UNK" -$! -$! End The Architecture Check. -$! -$ ENDIF -$! -$ ARCHD = ARCH -$ LIB32 = "32" -$ OPT_FILE = "" -$ POINTER_SIZE = "" -$! -$! Define The Different Encryption Types. -$! NOTE: Some might think this list ugly. However, it's made this way to -$! reflect the SDIRS variable in [-]Makefile.org as closely as possible, -$! thereby making it fairly easy to verify that the lists are the same. -$! -$ ET_WHIRLPOOL = "WHRLPOOL" -$ IF ARCH .EQS. "VAX" THEN ET_WHIRLPOOL = "" -$ ENCRYPT_TYPES = "Basic,"+ - - "OBJECTS,"+ - - "MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ - - "DES,AES,RC2,RC4,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ - - "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ - - "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ - - "EVP,EVP_2,EVP_3,ASN1,ASN1_2,PEM,X509,X509V3,"+ - - "CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ - - "CMS,PQUEUE,TS,JPAKE,SRP,STORE,CMAC" -$! -$! Check To Make Sure We Have Valid Command Line Parameters. -$! -$ GOSUB CHECK_OPTIONS -$! -$! Define The OBJ and EXE Directories. -$! -$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.CRYPTO] -$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO] -$! -$! Specify the destination directory in any /MAP option. -$! -$ if (LINKMAP .eqs. "MAP") -$ then -$ LINKMAP = LINKMAP+ "=''EXE_DIR'" -$ endif -$! -$! Add the location prefix to the linker options file name. -$! -$ if (OPT_FILE .nes. "") -$ then -$ OPT_FILE = EXE_DIR+ OPT_FILE -$ endif -$! -$! Initialise logical names and such -$! -$ GOSUB INITIALISE -$! -$! Tell The User What Kind of Machine We Run On. -$! -$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'" -$! -$! -$! Check To See If The Architecture Specific OBJ Directory Exists. -$! -$ IF (F$PARSE(OBJ_DIR).EQS."") -$ THEN -$! -$! It Dosen't Exist, So Create It. -$! -$ CREATE/DIR 'OBJ_DIR' -$! -$! End The Architecture Specific OBJ Directory Check. -$! -$ ENDIF -$! -$! Check To See If The Architecture Specific Directory Exists. -$! -$ IF (F$PARSE(EXE_DIR).EQS."") -$ THEN -$! -$! It Dosen't Exist, So Create It. -$! -$ CREATE/DIRECTORY 'EXE_DIR' -$! -$! End The Architecture Specific Directory Check. -$! -$ ENDIF -$! -$! Define The Library Name. -$! -$ LIB_NAME := 'EXE_DIR'SSL_LIBCRYPTO'LIB32'.OLB -$! -$! Define The CRYPTO-LIB We Are To Use. -$! -$ CRYPTO_LIB := 'EXE_DIR'SSL_LIBCRYPTO'LIB32'.OLB -$! -$! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library... -$! -$ IF (F$SEARCH(LIB_NAME).EQS."") -$ THEN -$! -$! Guess Not, Create The Library. -$! -$ LIBRARY/CREATE/OBJECT 'LIB_NAME' -$! -$! End The Library Check. -$! -$ ENDIF -$! -$! Build our options file for the application -$! -$ GOSUB CHECK_OPT_FILE -$! -$! Define The Different Encryption "library" Strings. -$! -$!!! Test apps disabled, as they aren't supported at all, -$!!! not even in the unix build -$!!! APPS_DES = "DES/DES,CBC3_ENC" -$!!! APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE" -$ -$! These variables are ordered as the SDIRS variable from the top Makefile.org -$! The contents of these variables are copied from the LIBOBJ variable in the -$! corresponding Makefile from each corresponding subdirectory, with .o stripped -$! and spaces replaced with commas. -$ LIB_ = "cryptlib,mem,mem_dbg,cversion,ex_data,cpt_err,ebcdic,"+ - - "uid,o_time,o_str,o_dir,o_fips,o_init,fips_ers,mem_clr" -$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref" -$ LIB_MD2 = "md2_dgst,md2_one" -$ LIB_MD4 = "md4_dgst,md4_one" -$ LIB_MD5 = "md5_dgst,md5_one" -$ LIB_SHA = "sha_dgst,sha1dgst,sha_one,sha1_one,sha256,sha512" -$ LIB_MDC2 = "mdc2dgst,mdc2_one" -$ LIB_HMAC = "hmac,hm_ameth,hm_pmeth" -$ LIB_RIPEMD = "rmd_dgst,rmd_one" -$ LIB_WHRLPOOL = "wp_dgst,wp_block" -$ LIB_DES = "set_key,ecb_enc,cbc_enc,"+ - - "ecb3_enc,cfb64enc,cfb64ede,cfb_enc,ofb64ede,"+ - - "enc_read,enc_writ,ofb64enc,"+ - - "ofb_enc,str2key,pcbc_enc,qud_cksm,rand_key,"+ - - "des_enc,fcrypt_b,"+ - - "fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ - - "ede_cbcm_enc,des_old,des_old2,read2pwd" -$ LIB_AES = "aes_misc,aes_ecb,aes_cfb,aes_ofb,aes_ctr,aes_ige,aes_wrap,"+ - - "aes_core,aes_cbc" -$ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64" -$ LIB_RC4 = "rc4_enc,rc4_skey,rc4_utl" -$ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64" -$ LIB_IDEA = "i_cbc,i_cfb64,i_ofb64,i_ecb,i_skey" -$ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64" -$ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64" -$ LIB_CAMELLIA = "cmll_ecb,cmll_ofb,cmll_cfb,cmll_ctr,"+ - - "cmll_utl,camellia,cmll_misc,cmll_cbc" -$ LIB_SEED = "seed,seed_ecb,seed_cbc,seed_cfb,seed_ofb" -$ LIB_MODES = "cbc128,ctr128,cts128,cfb128,ofb128,gcm128,"+ - - "ccm128,xts128,wrap128" -$ LIB_BN_ASM = "[.asm]vms.mar,vms-helper" -$ IF F$TRNLNM("OPENSSL_NO_ASM") .OR. ARCH .NES. "VAX" THEN - - LIB_BN_ASM = "bn_asm" -$ LIB_BN = "bn_add,bn_div,bn_exp,bn_lib,bn_ctx,bn_mul,bn_mod,"+ - - "bn_print,bn_rand,bn_shift,bn_word,bn_blind,"+ - - "bn_kron,bn_sqrt,bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+","+ - - "bn_recp,bn_mont,bn_mpi,bn_exp2,bn_gf2m,bn_nist,"+ - - "bn_depr,bn_const,bn_x931p" -$ LIB_EC = "ec_lib,ecp_smpl,ecp_mont,ecp_nist,ec_cvt,ec_mult,"+ - - "ec_err,ec_curve,ec_check,ec_print,ec_asn1,ec_key,"+ - - "ec2_smpl,ec2_mult,ec_ameth,ec_pmeth,eck_prn,"+ - - "ecp_nistp224,ecp_nistp256,ecp_nistp521,ecp_nistputil,"+ - - "ecp_oct,ec2_oct,ec_oct" -$ LIB_RSA = "rsa_eay,rsa_gen,rsa_lib,rsa_sign,rsa_saos,rsa_err,"+ - - "rsa_pk1,rsa_ssl,rsa_none,rsa_oaep,rsa_chk,rsa_null,"+ - - "rsa_pss,rsa_x931,rsa_asn1,rsa_depr,rsa_ameth,rsa_prn,"+ - - "rsa_pmeth,rsa_crpt" -$ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,"+ - - "dsa_err,dsa_ossl,dsa_depr,dsa_ameth,dsa_pmeth,dsa_prn" -$ LIB_ECDSA = "ecs_lib,ecs_asn1,ecs_ossl,ecs_sign,ecs_vrf,ecs_err" -$ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err,dh_depr,"+ - - "dh_ameth,dh_pmeth,dh_prn,dh_rfc5114,dh_kdf" -$ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err,ech_kdf" -$ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ - - "dso_openssl,dso_win32,dso_vms,dso_beos" -$ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ - - "eng_table,eng_pkey,eng_fat,eng_all,"+ - - "tb_rsa,tb_dsa,tb_ecdsa,tb_dh,tb_ecdh,tb_rand,tb_store,"+ - - "tb_cipher,tb_digest,tb_pkmeth,tb_asnmth,"+ - - "eng_openssl,eng_cnf,eng_dyn,eng_cryptodev,"+ - - "eng_rdrand" -$ LIB_BUFFER = "buffer,buf_str,buf_err" -$ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ - - "bss_mem,bss_null,bss_fd,"+ - - "bss_file,bss_sock,bss_conn,"+ - - "bf_null,bf_buff,b_print,b_dump,"+ - - "b_sock,bss_acpt,bf_nbio,bss_log,bss_bio,"+ - - "bss_dgram,"+ - - "bf_lbuf,bss_rtcp" ! The last two are VMS specific -$ LIB_STACK = "stack" -$ LIB_LHASH = "lhash,lh_stats" -$ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ - - "rand_vms" ! The last one is VMS specific -$ LIB_ERR = "err,err_all,err_prn" -$ LIB_EVP = "encode,digest,evp_enc,evp_key,evp_acnf,evp_cnf,"+ - - "e_des,e_bf,e_idea,e_des3,e_camellia,"+ - - "e_rc4,e_aes,names,e_seed,"+ - - "e_xcbc_d,e_rc2,e_cast,e_rc5" -$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha,m_sha1,m_wp," + - - "m_dss,m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ - - "p_open,p_seal,p_sign,p_verify,p_lib,p_enc,p_dec,"+ - - "bio_md,bio_b64,bio_enc,evp_err,e_null,"+ - - "c_all,c_allc,c_alld,evp_lib,bio_ok,"+- - "evp_pkey,evp_pbe,p5_crpt,p5_crpt2" -$ LIB_EVP_3 = "e_old,pmeth_lib,pmeth_fn,pmeth_gn,m_sigver,"+ - - "e_aes_cbc_hmac_sha1,e_aes_cbc_hmac_sha256,e_rc4_hmac_md5" -$ LIB_ASN1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ - - "a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,"+ - - "a_enum,a_utf8,a_sign,a_digest,a_verify,a_mbstr,a_strex,"+ - - "x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,x_bignum,"+ - - "x_long,x_name,x_x509,x_x509a,x_crl,x_info,x_spki,nsseq,"+ - - "x_nx509,d2i_pu,d2i_pr,i2d_pu,i2d_pr" -$ LIB_ASN1_2 = "t_req,t_x509,t_x509a,t_crl,t_pkey,t_spki,t_bitst,"+ - - "tasn_new,tasn_fre,tasn_enc,tasn_dec,tasn_utl,tasn_typ,"+ - - "tasn_prn,ameth_lib,"+ - - "f_int,f_string,n_pkey,"+ - - "f_enum,x_pkey,a_bool,x_exten,bio_asn1,bio_ndef,asn_mime,"+ - - "asn1_gen,asn1_par,asn1_lib,asn1_err,a_bytes,a_strnid,"+ - - "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid" -$ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err,"+ - - "pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey,pvkfmt" -$ LIB_X509 = "x509_def,x509_d2,x509_r2x,x509_cmp,"+ - - "x509_obj,x509_req,x509spki,x509_vfy,"+ - - "x509_set,x509cset,x509rset,x509_err,"+ - - "x509name,x509_v3,x509_ext,x509_att,"+ - - "x509type,x509_lu,x_all,x509_txt,"+ - - "x509_trs,by_file,by_dir,x509_vpm" -$ LIB_X509V3 = "v3_bcons,v3_bitst,v3_conf,v3_extku,v3_ia5,v3_lib,"+ - - "v3_prn,v3_utl,v3err,v3_genn,v3_alt,v3_skey,v3_akey,v3_pku,"+ - - "v3_int,v3_enum,v3_sxnet,v3_cpols,v3_crld,v3_purp,v3_info,"+ - - "v3_ocsp,v3_akeya,v3_pmaps,v3_pcons,v3_ncons,v3_pcia,v3_pci,"+ - - "pcy_cache,pcy_node,pcy_data,pcy_map,pcy_tree,pcy_lib,"+ - - "v3_asid,v3_addr,v3_scts" -$ LIB_CONF = "conf_err,conf_lib,conf_api,conf_def,conf_mod,conf_mall,conf_sap" -$ LIB_TXT_DB = "txt_db" -$ LIB_PKCS7 = "pk7_asn1,pk7_lib,pkcs7err,pk7_doit,pk7_smime,pk7_attr,"+ - - "pk7_mime,bio_pk7" -$ LIB_PKCS12 = "p12_add,p12_asn,p12_attr,p12_crpt,p12_crt,p12_decr,"+ - - "p12_init,p12_key,p12_kiss,p12_mutl,"+ - - "p12_utl,p12_npas,pk12err,p12_p8d,p12_p8e" -$ LIB_COMP = "comp_lib,comp_err,"+ - - "c_rle,c_zlib" -$ LIB_OCSP = "ocsp_asn,ocsp_ext,ocsp_ht,ocsp_lib,ocsp_cl,"+ - - "ocsp_srv,ocsp_prn,ocsp_vfy,ocsp_err" -$ LIB_UI_COMPAT = ",ui_compat" -$ LIB_UI = "ui_err,ui_lib,ui_openssl,ui_util"+LIB_UI_COMPAT -$ LIB_KRB5 = "krb5_asn" -$ LIB_CMS = "cms_lib,cms_asn1,cms_att,cms_io,cms_smime,cms_err,"+ - - "cms_sd,cms_dd,cms_cd,cms_env,cms_enc,cms_ess,"+ - - "cms_pwri,cms_kari" -$ LIB_PQUEUE = "pqueue" -$ LIB_TS = "ts_err,ts_req_utils,ts_req_print,ts_rsp_utils,ts_rsp_print,"+ - - "ts_rsp_sign,ts_rsp_verify,ts_verify_ctx,ts_lib,ts_conf,"+ - - "ts_asn1" -$ LIB_JPAKE = "jpake,jpake_err" -$ LIB_SRP = "srp_lib,srp_vfy" -$ LIB_STORE = "str_err,str_lib,str_meth,str_mem" -$ LIB_CMAC = "cmac,cm_ameth,cm_pmeth" -$! -$! Setup exceptional compilations -$! -$ CC3_SHOWN = 0 -$ CC4_SHOWN = 0 -$ CC5_SHOWN = 0 -$ CC6_SHOWN = 0 -$! -$! The following lists must have leading and trailing commas, and no -$! embedded spaces. (They are scanned for ",name,".) -$! -$ ! Add definitions for no threads on OpenVMS 7.1 and higher. -$ COMPILEWITH_CC3 = ",bss_rtcp," -$ ! Disable the DOLLARID warning. Not needed with /STANDARD=RELAXED. -$ COMPILEWITH_CC4 = "" !!! ",a_utctm,bss_log,o_time,o_dir," -$ ! Disable disjoint optimization on VAX with DECC. -$ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + - - "seed,sha_dgst,sha1dgst,rmd_dgst,bf_enc," -$ ! Disable the MIXLINKAGE warning. -$ COMPILEWITH_CC6 = "" !!! ",enc_read,set_key," -$! -$! Figure Out What Other Modules We Are To Build. -$! -$ BUILD_SET: -$! -$! Define A Module Counter. -$! -$ MODULE_COUNTER = 0 -$! -$! Top Of The Loop. -$! -$ MODULE_NEXT: -$! -$! Extract The Module Name From The Encryption List. -$! -$ MODULE_NAME = F$EDIT(F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES),"COLLAPSE") -$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = "" -$ MODULE_NAME1 = MODULE_NAME -$! -$! Check To See If We Are At The End Of The Module List. -$! -$ IF (MODULE_NAME.EQS.",") -$ THEN -$! -$! We Are At The End Of The Module List, Go To MODULE_DONE. -$! -$ GOTO MODULE_DONE -$! -$! End The Module List Check. -$! -$ ENDIF -$! -$! Increment The Moudle Counter. -$! -$ MODULE_COUNTER = MODULE_COUNTER + 1 -$! -$! Create The Library and Apps Module Names. -$! -$ LIB_MODULE = "LIB_" + MODULE_NAME -$ APPS_MODULE = "APPS_" + MODULE_NAME -$ IF (F$EXTRACT(0,5,MODULE_NAME).EQS."ASN1_") -$ THEN -$ MODULE_NAME = "ASN1" -$ ENDIF -$ IF (F$EXTRACT(0,4,MODULE_NAME).EQS."EVP_") -$ THEN -$ MODULE_NAME = "EVP" -$ ENDIF -$! -$! Set state (can be LIB and APPS) -$! -$ STATE = "LIB" -$ IF BUILDALL .EQS. "APPS" THEN STATE = "APPS" -$! -$! Check if the library module name actually is defined -$! -$ IF F$TYPE('LIB_MODULE') .EQS. "" -$ THEN -$ WRITE SYS$ERROR "" -$ WRITE SYS$ERROR "The module ",MODULE_NAME1," does not exist. Continuing..." -$ WRITE SYS$ERROR "" -$ GOTO MODULE_NEXT -$ ENDIF -$! -$! Top Of The Module Loop. -$! -$ MODULE_AGAIN: -$! -$! Tell The User What Module We Are Building. -$! -$ IF (MODULE_NAME1.NES."") -$ THEN -$ IF STATE .EQS. "LIB" -$ THEN -$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,",",STATE,")" -$ ELSE IF F$TYPE('APPS_MODULE') .NES. "" -$ THEN -$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Applications. (",BUILDALL,",",STATE,")" -$ ENDIF -$ ENDIF -$ ENDIF -$! -$! Define A File Counter And Set It To "0". -$! -$ FILE_COUNTER = 0 -$ APPLICATION = "" -$ APPLICATION_COUNTER = 0 -$! -$! Top Of The File Loop. -$! -$ NEXT_FILE: -$! -$! Look in the LIB_MODULE is we're in state LIB -$! -$ IF STATE .EQS. "LIB" -$ THEN -$! -$! O.K, Extract The File Name From The File List. -$! -$ FILE_NAME = F$EDIT(F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE'),"COLLAPSE") -$! -$! else -$! -$ ELSE -$ FILE_NAME = "," -$! -$ IF F$TYPE('APPS_MODULE') .NES. "" -$ THEN -$! -$! Extract The File Name From The File List. -$! This part is a bit more complicated. -$! -$ IF APPLICATION .EQS. "" -$ THEN -$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE') -$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1 -$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION) -$ APPLICATION = F$ELEMENT(0,"/",APPLICATION) -$ FILE_COUNTER = 0 -$ ENDIF -$ -$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*" -$! SHOW SYMBOL APPLICATION* -$! -$ IF APPLICATION .NES. ";" -$ THEN -$ FILE_NAME = F$EDIT(F$ELEMENT(FILE_COUNTER,",",APPLICATION_OBJECTS),"COLLAPSE") -$ IF FILE_NAME .EQS. "," -$ THEN -$ APPLICATION = "" -$ GOTO NEXT_FILE -$ ENDIF -$ ENDIF -$ ENDIF -$ ENDIF -$! -$! Check To See If We Are At The End Of The File List. -$! -$ IF (FILE_NAME.EQS.",") -$ THEN -$! -$! We Are At The End Of The File List, Change State Or Goto FILE_DONE. -$! -$ IF STATE .EQS. "LIB" .AND. BUILDALL .NES. "LIBRARY" -$ THEN -$ STATE = "APPS" -$ GOTO MODULE_AGAIN -$ ELSE -$ GOTO FILE_DONE -$ ENDIF -$! -$! End The File List Check. -$! -$ ENDIF -$! -$! Increment The Counter. -$! -$ FILE_COUNTER = FILE_COUNTER + 1 -$! -$! Create The Source File Name. -$! -$ TMP_FILE_NAME = F$ELEMENT(1,"]",FILE_NAME) -$ IF TMP_FILE_NAME .EQS. "]" THEN TMP_FILE_NAME = FILE_NAME -$ IF F$ELEMENT(0,".",TMP_FILE_NAME) .EQS. TMP_FILE_NAME THEN - - FILE_NAME = FILE_NAME + ".c" -$ IF (MODULE_NAME.NES."") -$ THEN -$ SOURCE_FILE = "SYS$DISK:[." + MODULE_NAME+ "]" + FILE_NAME -$ ELSE -$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME -$ ENDIF -$ SOURCE_FILE = SOURCE_FILE - "][" -$! -$! Create The Object File Name. -$! -$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ" -$ ON WARNING THEN GOTO NEXT_FILE -$! -$! Check To See If The File We Want To Compile Is Actually There. -$! -$ IF (F$SEARCH(SOURCE_FILE).EQS."") -$ THEN -$! -$! Tell The User That The File Doesn't Exist. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist." -$ WRITE SYS$OUTPUT "" -$! -$! Exit The Build. -$! -$ GOTO EXIT -$! -$! End The File Exist Check. -$! -$ ENDIF -$! -$! Tell The User We Are Compiling The File. -$! -$ IF (MODULE_NAME.EQS."") -$ THEN -$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File. (",BUILDALL,",",STATE,")" -$ ENDIF -$ IF (MODULE_NAME.NES."") -$ THEN -$ WRITE SYS$OUTPUT " ",FILE_NAME,"" -$ ENDIF -$! -$! Compile The File. -$! -$ ON ERROR THEN GOTO NEXT_FILE -$ FILE_NAME0 = ","+ F$ELEMENT(0,".",FILE_NAME)+ "," -$ IF FILE_NAME - ".mar" .NES. FILE_NAME -$ THEN -$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ IF COMPILEWITH_CC3 - FILE_NAME0 .NES. COMPILEWITH_CC3 -$ THEN -$ write sys$output " \Using special rule (3)" -$ if (.not. CC3_SHOWN) -$ then -$ CC3_SHOWN = 1 -$ x = " "+ CC3 -$ write /symbol sys$output x -$ endif -$ CC3/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ IF COMPILEWITH_CC4 - FILE_NAME0 .NES. COMPILEWITH_CC4 -$ THEN -$ write /symbol sys$output " \Using special rule (4)" -$ if (.not. CC4_SHOWN) -$ then -$ CC4_SHOWN = 1 -$ x = " "+ CC4 -$ write /symbol sys$output x -$ endif -$ CC4/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ IF CC5_DIFFERENT .AND. - - (COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5) -$ THEN -$ write sys$output " \Using special rule (5)" -$ if (.not. CC5_SHOWN) -$ then -$ CC5_SHOWN = 1 -$ x = " "+ CC5 -$ write /symbol sys$output x -$ endif -$ CC5/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ IF COMPILEWITH_CC6 - FILE_NAME0 .NES. COMPILEWITH_CC6 -$ THEN -$ write sys$output " \Using special rule (6)" -$ if (.not. CC6_SHOWN) -$ then -$ CC6_SHOWN = 1 -$ x = " "+ CC6 -$ write /symbol sys$output x -$ endif -$ CC6/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ENDIF -$ ENDIF -$ ENDIF -$ ENDIF -$ ENDIF -$ IF STATE .EQS. "LIB" -$ THEN -$! -$! Add It To The Library. -$! -$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE' -$! -$! Time To Clean Up The Object File. -$! -$ DELETE 'OBJECT_FILE';* -$ ENDIF -$! -$! Go Back And Do It Again. -$! -$ GOTO NEXT_FILE -$! -$! All Done With This Library Part. -$! -$ FILE_DONE: -$! -$! Time To Build Some Applications -$! -$ IF F$TYPE('APPS_MODULE') .NES. "" .AND. BUILDALL .NES. "LIBRARY" -$ THEN -$ APPLICATION_COUNTER = 0 -$ NEXT_APPLICATION: -$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE') -$ IF APPLICATION .EQS. ";" THEN GOTO APPLICATION_DONE -$ -$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1 -$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION) -$ APPLICATION = F$ELEMENT(0,"/",APPLICATION) -$ -$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*" -$! SHOW SYMBOL APPLICATION* -$! -$! Tell the user what happens -$! -$ WRITE SYS$OUTPUT " ",APPLICATION,".exe" -$! -$! Link The Program. -$! -$ ON ERROR THEN GOTO NEXT_APPLICATION -$! -$! Link With A TCP/IP Library. -$! -$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' - - /EXE='EXE_DIR''APPLICATION'.EXE - - 'OBJ_DIR''APPLICATION_OBJECTS', - - 'CRYPTO_LIB'/LIBRARY - - 'TCPIP_LIB' - - 'ZLIB_LIB' - - ,'OPT_FILE' /OPTIONS -$! -$ GOTO NEXT_APPLICATION -$ APPLICATION_DONE: -$ ENDIF -$! -$! Go Back And Get The Next Module. -$! -$ GOTO MODULE_NEXT -$! -$! All Done With This Module. -$! -$ MODULE_DONE: -$! -$! Tell The User That We Are All Done. -$! -$ WRITE SYS$OUTPUT "All Done..." -$ EXIT: -$ GOSUB CLEANUP -$ EXIT -$! -$! Check For The Link Option FIle. -$! -$ CHECK_OPT_FILE: -$! -$! Check To See If We Need To Make A VAX C Option File. -$! -$ IF (COMPILER.EQS."VAXC") -$ THEN -$! -$! Check To See If We Already Have A VAX C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! We Need A VAX C Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Against -! The Sharable VAX C Runtime Library. -! -SYS$SHARE:VAXCRTL.EXE/SHARE -$EOD -$! -$! End The Option File Check. -$! -$ ENDIF -$! -$! End The VAXC Check. -$! -$ ENDIF -$! -$! Check To See If We Need A GNU C Option File. -$! -$ IF (COMPILER.EQS."GNUC") -$ THEN -$! -$! Check To See If We Already Have A GNU C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! We Need A GNU C Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Against -! The Sharable C Runtime Library. -! -GNU_CC:[000000]GCCLIB/LIBRARY -SYS$SHARE:VAXCRTL/SHARE -$EOD -$! -$! End The Option File Check. -$! -$ ENDIF -$! -$! End The GNU C Check. -$! -$ ENDIF -$! -$! Check To See If We Need A DEC C Option File. -$! -$ IF (COMPILER.EQS."DECC") -$ THEN -$! -$! Check To See If We Already Have A DEC C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! Figure Out If We Need A non-VAX Or A VAX Linker Option File. -$! -$ IF ARCH .EQS. "VAX" -$ THEN -$! -$! We Need A DEC C Linker Option File For VAX. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Against -! The Sharable DEC C Runtime Library. -! -SYS$SHARE:DECC$SHR.EXE/SHARE -$EOD -$! -$! Else... -$! -$ ELSE -$! -$! Create The non-VAX Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File For non-VAX To Link Against -! The Sharable C Runtime Library. -! -SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE -SYS$SHARE:CMA$OPEN_RTL/SHARE -$EOD -$! -$! End The DEC C Option File Check. -$! -$ ENDIF -$! -$! End The Option File Search. -$! -$ ENDIF -$! -$! End The DEC C Check. -$! -$ ENDIF -$! -$! Tell The User What Linker Option File We Are Using. -$! -$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"." -$! -$! Time To RETURN. -$! -$ RETURN -$! -$! Check The User's Options. -$! -$ CHECK_OPTIONS: -$! -$! Check To See If P1 Is Blank. -$! -$ IF (P1.EQS."ALL") -$ THEN -$! -$! P1 Is Blank, So Build Everything. -$! -$ BUILDALL = "TRUE" -$! -$! Else... -$! -$ ELSE -$! -$! Else, Check To See If P1 Has A Valid Argument. -$! -$ IF (P1.EQS."LIBRARY").OR.(P1.EQS."APPS") -$ THEN -$! -$! A Valid Argument. -$! -$ BUILDALL = P1 -$! -$! Else... -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " ALL : Just Build Everything." -$ WRITE SYS$OUTPUT " LIBRARY : To Compile Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." -$ WRITE SYS$OUTPUT " APPS : To Compile Just The [.xxx.EXE.CRYPTO]*.EXE Programs." -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " ALPHA[64]: Alpha Architecture." -$ WRITE SYS$OUTPUT " IA64[64] : IA64 Architecture." -$ WRITE SYS$OUTPUT " VAX : VAX Architecture." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! End The Valid Argument Check. -$! -$ ENDIF -$! -$! End The P1 Check. -$! -$ ENDIF -$! -$! Check To See If P2 Is Blank. -$! -$ IF (P2.EQS."NODEBUG") -$ THEN -$! -$! P2 Is NODEBUG, So Compile Without The Debugger Information. -$! -$ DEBUGGER = "NODEBUG" -$ LINKMAP = "NOMAP" -$ TRACEBACK = "NOTRACEBACK" -$ GCC_OPTIMIZE = "OPTIMIZE" -$ CC_OPTIMIZE = "OPTIMIZE" -$ MACRO_OPTIMIZE = "OPTIMIZE" -$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile." -$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization." -$ ELSE -$! -$! Check To See If We Are To Compile With Debugger Information. -$! -$ IF (P2.EQS."DEBUG") -$ THEN -$! -$! Compile With Debugger Information. -$! -$ DEBUGGER = "DEBUG" -$ LINKMAP = "MAP" -$ TRACEBACK = "TRACEBACK" -$ GCC_OPTIMIZE = "NOOPTIMIZE" -$ CC_OPTIMIZE = "NOOPTIMIZE" -$ MACRO_OPTIMIZE = "NOOPTIMIZE" -$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile." -$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization." -$ ELSE -$! -$! They Entered An Invalid Option. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." -$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! End The Valid Argument Check. -$! -$ ENDIF -$! -$! End The P2 Check. -$! -$ ENDIF -$! -$! Special Threads For OpenVMS v7.1 Or Later -$! -$! Written By: Richard Levitte -$! richard@levitte.org -$! -$! -$! Check To See If We Have A Option For P5. -$! -$ IF (P5.EQS."") -$ THEN -$! -$! Get The Version Of VMS We Are Using. -$! -$ ISSEVEN := -$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) -$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) -$! -$! Check To See If The VMS Version Is v7.1 Or Later. -$! -$ IF (TMP.GE.71) -$ THEN -$! -$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. -$! -$ ISSEVEN := ,PTHREAD_USE_D4 -$! -$! End The VMS Version Check. -$! -$ ENDIF -$! -$! End The P5 Check. -$! -$ ENDIF -$! -$! Check P7 (POINTER_SIZE). -$! -$ IF (P7 .NES. "") .AND. (ARCH .NES. "VAX") -$ THEN -$! -$ IF (P7 .EQS. "32") -$ THEN -$ POINTER_SIZE = " /POINTER_SIZE=32" -$ ELSE -$ POINTER_SIZE = F$EDIT( P7, "COLLAPSE, UPCASE") -$ IF ((POINTER_SIZE .EQS. "64") .OR. - - (POINTER_SIZE .EQS. "64=") .OR. - - (POINTER_SIZE .EQS. "64=ARGV")) -$ THEN -$ ARCHD = ARCH+ "_64" -$ LIB32 = "" -$ POINTER_SIZE = " /POINTER_SIZE=64" -$ ELSE -$! -$! Tell The User Entered An Invalid Option. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ", P7, - - " Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT - - " """" : Compile with default (short) pointers." -$ WRITE SYS$OUTPUT - - " 32 : Compile with 32-bit (short) pointers." -$ WRITE SYS$OUTPUT - - " 64 : Compile with 64-bit (long) pointers (auto ARGV)." -$ WRITE SYS$OUTPUT - - " 64= : Compile with 64-bit (long) pointers (no ARGV)." -$ WRITE SYS$OUTPUT - - " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$ ENDIF -$! -$ ENDIF -$! -$! End The P7 (POINTER_SIZE) Check. -$! -$ ENDIF -$! -$! Set basic C compiler /INCLUDE directories. -$! -$ CC_INCLUDES = "SYS$DISK:[.''ARCHD'],SYS$DISK:[],SYS$DISK:[-],"+ - - "SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.MODES],SYS$DISK:[.ASN1],SYS$DISK:[.EVP]" -$! -$! Check To See If P3 Is Blank. -$! -$ IF (P3.EQS."") -$ THEN -$! -$! O.K., The User Didn't Specify A Compiler, Let's Try To -$! Find Out Which One To Use. -$! -$! Check To See If We Have GNU C. -$! -$ IF (F$TRNLNM("GNU_CC").NES."") -$ THEN -$! -$! Looks Like GNUC, Set To Use GNUC. -$! -$ P3 = "GNUC" -$! -$! Else... -$! -$ ELSE -$! -$! Check To See If We Have VAXC Or DECC. -$! -$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."") -$ THEN -$! -$! Looks Like DECC, Set To Use DECC. -$! -$ P3 = "DECC" -$! -$! Else... -$! -$ ELSE -$! -$! Looks Like VAXC, Set To Use VAXC. -$! -$ P3 = "VAXC" -$! -$! End The VAXC Compiler Check. -$! -$ ENDIF -$! -$! End The DECC & VAXC Compiler Check. -$! -$ ENDIF -$! -$! End The Compiler Check. -$! -$ ENDIF -$! -$! Check To See If We Have A Option For P4. -$! -$ IF (P4.EQS."") -$ THEN -$! -$! Find out what socket library we have available -$! -$ IF F$PARSE("SOCKETSHR:") .NES. "" -$ THEN -$! -$! We have SOCKETSHR, and it is my opinion that it's the best to use. -$! -$ P4 = "SOCKETSHR" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" -$! -$! Else, let's look for something else -$! -$ ELSE -$! -$! Like UCX (the reason to do this before Multinet is that the UCX -$! emulation is easier to use...) -$! -$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" - - .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" - - .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. "" -$ THEN -$! -$! Last resort: a UCX or UCX-compatible library -$! -$ P4 = "UCX" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" -$! -$! That was all... -$! -$ ENDIF -$ ENDIF -$ ENDIF -$! -$! Set Up Initial CC Definitions, Possibly With User Ones -$! -$ CCDEFS = "TCPIP_TYPE_''P4',DSO_VMS" -$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS -$ CCEXTRAFLAGS = "" -$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS -$ CCDISABLEWARNINGS = "" !!! "MAYLOSEDATA3" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR" -$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" -$ THEN -$ IF CCDISABLEWARNINGS .NES. THEN CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," -$ CCDISABLEWARNINGS = CCDISABLEWARNINGS + USER_CCDISABLEWARNINGS -$ ENDIF -$! -$! Check To See If We Have A ZLIB Option. -$! -$ ZLIB = P8 -$ IF (ZLIB .NES. "") -$ THEN -$! -$! Check for expected ZLIB files. -$! -$ err = 0 -$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY") -$ if (f$search( file1) .eqs. "") -$ then -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." -$ WRITE SYS$OUTPUT " Can't find header: ''file1'" -$ err = 1 -$ endif -$ file1 = f$parse( "A.;", ZLIB)- "A.;" -$! -$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY") -$ if (f$search( file2) .eqs. "") -$ then -$ if (err .eq. 0) -$ then -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." -$ endif -$ WRITE SYS$OUTPUT " Can't find library: ''file2'" -$ WRITE SYS$OUTPUT "" -$ err = err+ 2 -$ endif -$ if (err .eq. 1) -$ then -$ WRITE SYS$OUTPUT "" -$ endif -$! -$ if (err .ne. 0) -$ then -$ EXIT -$ endif -$! -$ CCDEFS = """ZLIB=1"", "+ CCDEFS -$ CC_INCLUDES = CC_INCLUDES+ ", "+ file1 -$ ZLIB_LIB = ", ''file2' /library" -$! -$! Print info -$! -$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2 -$! -$! End The ZLIB Check. -$! -$ ENDIF -$! -$! Check To See If The User Entered A Valid Parameter. -$! -$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC") -$ THEN -$! -$! Check To See If The User Wanted DECC. -$! -$ IF (P3.EQS."DECC") -$ THEN -$! -$! Looks Like DECC, Set To Use DECC. -$! -$ COMPILER = "DECC" -$! -$! Tell The User We Are Using DECC. -$! -$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." -$! -$! Use DECC... -$! -$ CC = "CC" -$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" - - THEN CC = "CC/DECC" -$ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ - - "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + - - " /INCLUDE=(''CC_INCLUDES')"+ - - CCEXTRAFLAGS -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "VAX_DECC_OPTIONS.OPT" -$! -$! End DECC Check. -$! -$ ENDIF -$! -$! Check To See If We Are To Use VAXC. -$! -$ IF (P3.EQS."VAXC") -$ THEN -$! -$! Looks Like VAXC, Set To Use VAXC. -$! -$ COMPILER = "VAXC" -$! -$! Tell The User We Are Using VAX C. -$! -$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." -$! -$! Compile Using VAXC. -$! -$ CC = "CC" -$ IF ARCH.NES."VAX" -$ THEN -$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!" -$ EXIT -$ ENDIF -$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC" -$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - - "/INCLUDE=(''CC_INCLUDES')"+ - - CCEXTRAFLAGS -$ CCDEFS = """VAXC""," + CCDEFS -$! -$! Define <sys> As SYS$COMMON:[SYSLIB] -$! -$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB] -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "VAX_VAXC_OPTIONS.OPT" -$! -$! End VAXC Check -$! -$ ENDIF -$! -$! Check To See If We Are To Use GNU C. -$! -$ IF (P3.EQS."GNUC") -$ THEN -$! -$! Looks Like GNUC, Set To Use GNUC. -$! -$ COMPILER = "GNUC" -$! -$! Tell The User We Are Using GNUC. -$! -$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." -$! -$! Use GNU C... -$! -$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - - "/INCLUDE=(''CC_INCLUDES')"+ - - CCEXTRAFLAGS -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "VAX_GNUC_OPTIONS.OPT" -$! -$! End The GNU C Check. -$! -$ ENDIF -$! -$! Set up default defines -$! -$ CCDEFS = """FLAT_INC=1""," + CCDEFS -$! -$! Finish up the definition of CC. -$! -$ IF COMPILER .EQS. "DECC" -$ THEN -$! Not all compiler versions support MAYLOSEDATA3. -$ OPT_TEST = "MAYLOSEDATA3" -$ DEFINE /USER_MODE SYS$ERROR NL: -$ DEFINE /USER_MODE SYS$OUTPUT NL: -$ 'CC' /NOCROSS_REFERENCE /NOLIST /NOOBJECT - - /WARNINGS = DISABLE = ('OPT_TEST', EMPTYFILE) NL: -$ IF ($SEVERITY) -$ THEN -$ IF CCDISABLEWARNINGS .NES. "" THEN - - CCDISABLEWARNINGS = CCDISABLEWARNINGS+ "," -$ CCDISABLEWARNINGS = CCDISABLEWARNINGS+ OPT_TEST -$ ENDIF -$ IF CCDISABLEWARNINGS .EQS. "" -$ THEN -$ CC4DISABLEWARNINGS = "DOLLARID" -$ CC6DISABLEWARNINGS = "MIXLINKAGE" -$ ELSE -$ CC4DISABLEWARNINGS = CCDISABLEWARNINGS + ",DOLLARID" -$ CC6DISABLEWARNINGS = CCDISABLEWARNINGS + ",MIXLINKAGE" -$ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))" -$ ENDIF -$ CC4DISABLEWARNINGS = " /WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))" -$ CC6DISABLEWARNINGS = " /WARNING=(DISABLE=(" + CC6DISABLEWARNINGS + "))" -$ ELSE -$ CCDISABLEWARNINGS = "" -$ CC4DISABLEWARNINGS = "" -$ CC6DISABLEWARNINGS = "" -$ ENDIF -$ CC3 = CC + " /DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS -$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS -$ IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P2 .NES. "DEBUG" -$ THEN -$ CC5 = CC + " /OPTIMIZE=NODISJOINT" -$ CC5_DIFFERENT = 1 -$ ELSE -$ CC5 = CC -$ CC5_DIFFERENT = 0 -$ ENDIF -$ CC4 = CC - CCDISABLEWARNINGS + CC4DISABLEWARNINGS -$ CC6 = CC - CCDISABLEWARNINGS + CC6DISABLEWARNINGS -$! -$! Show user the result -$! -$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC -$! -$! Else The User Entered An Invalid Argument. -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." -$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." -$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! End The Valid Argument Check. -$! -$ ENDIF -$! -$! Build a MACRO command for the architecture at hand -$! -$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'" -$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'" -$! -$! Show user the result -$! -$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO -$! -$! Time to check the contents, and to make sure we get the correct library. -$! -$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX" - - .OR. P4.EQS."TCPIP" .OR. P4.EQS."NONE" -$ THEN -$! -$! Check to see if SOCKETSHR was chosen -$! -$ IF P4.EQS."SOCKETSHR" -$ THEN -$! -$! Set the library to use SOCKETSHR -$! -$ TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS" -$! -$! Done with SOCKETSHR -$! -$ ENDIF -$! -$! Check to see if MULTINET was chosen -$! -$ IF P4.EQS."MULTINET" -$ THEN -$! -$! Set the library to use UCX emulation. -$! -$ P4 = "UCX" -$! -$! Done with MULTINET -$! -$ ENDIF -$! -$! Check to see if UCX was chosen -$! -$ IF P4.EQS."UCX" -$ THEN -$! -$! Set the library to use UCX. -$! -$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS" -$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -$ THEN -$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS" -$ ELSE -$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN - - TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS" -$ ENDIF -$! -$! Done with UCX -$! -$ ENDIF -$! -$! Check to see if TCPIP was chosen -$! -$ IF P4.EQS."TCPIP" -$ THEN -$! -$! Set the library to use TCPIP (post UCX). -$! -$ TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS" -$! -$! Done with TCPIP -$! -$ ENDIF -$! -$! Check to see if NONE was chosen -$! -$ IF P4.EQS."NONE" -$ THEN -$! -$! Do not use a TCPIP library. -$! -$ TCPIP_LIB = "" -$! -$! Done with TCPIP -$! -$ ENDIF -$! -$! Print info -$! -$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- "," -$! -$! Else The User Entered An Invalid Argument. -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." -$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." -$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! Done with TCP/IP libraries -$! -$ ENDIF -$! -$! Check if the user wanted to compile just a subset of all the encryption -$! methods. -$! -$ IF P6 .NES. "" -$ THEN -$ ENCRYPT_TYPES = P6 -$ ENDIF -$! -$! Time To RETURN... -$! -$ RETURN -$! -$ INITIALISE: -$! -$! Save old value of the logical name OPENSSL -$! -$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE") -$! -$! Save directory information -$! -$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;" -$ __HERE = F$EDIT(__HERE,"UPCASE") -$ __TOP = __HERE - "CRYPTO]" -$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]" -$! -$! Set up the logical name OPENSSL to point at the include directory -$! -$ DEFINE OPENSSL/NOLOG '__INCLUDE' -$! -$! Done -$! -$ RETURN -$! -$ CLEANUP: -$! -$! Restore the logical name OPENSSL if it had a value -$! -$ IF __SAVE_OPENSSL .EQS. "" -$ THEN -$ DEASSIGN OPENSSL -$ ELSE -$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL' -$ ENDIF -$! -$! Done -$! -$ RETURN |