diff options
Diffstat (limited to 'doc')
67 files changed, 1582 insertions, 190 deletions
diff --git a/doc/classes/AnimatedSprite2D.xml b/doc/classes/AnimatedSprite2D.xml index 969e9cc85b..d18419f163 100644 --- a/doc/classes/AnimatedSprite2D.xml +++ b/doc/classes/AnimatedSprite2D.xml @@ -22,7 +22,7 @@ <method name="play"> <return type="void"> </return> - <argument index="0" name="anim" type="StringName" default="@"""> + <argument index="0" name="anim" type="StringName" default="&"""> </argument> <argument index="1" name="backwards" type="bool" default="false"> </argument> @@ -39,7 +39,7 @@ </method> </methods> <members> - <member name="animation" type="StringName" setter="set_animation" getter="get_animation" default="@"default""> + <member name="animation" type="StringName" setter="set_animation" getter="get_animation" default="&"default""> The current animation from the [code]frames[/code] resource. If this value changes, the [code]frame[/code] counter is reset. </member> <member name="centered" type="bool" setter="set_centered" getter="is_centered" default="true"> diff --git a/doc/classes/AnimatedSprite3D.xml b/doc/classes/AnimatedSprite3D.xml index 02ccab4e05..39ab317b79 100644 --- a/doc/classes/AnimatedSprite3D.xml +++ b/doc/classes/AnimatedSprite3D.xml @@ -20,7 +20,7 @@ <method name="play"> <return type="void"> </return> - <argument index="0" name="anim" type="StringName" default="@"""> + <argument index="0" name="anim" type="StringName" default="&"""> </argument> <description> Plays the animation named [code]anim[/code]. If no [code]anim[/code] is provided, the current animation is played. @@ -35,7 +35,7 @@ </method> </methods> <members> - <member name="animation" type="StringName" setter="set_animation" getter="get_animation" default="@"default""> + <member name="animation" type="StringName" setter="set_animation" getter="get_animation" default="&"default""> The current animation from the [code]frames[/code] resource. If this value changes, the [code]frame[/code] counter is reset. </member> <member name="frame" type="int" setter="set_frame" getter="get_frame" default="0"> diff --git a/doc/classes/AnimationNodeAnimation.xml b/doc/classes/AnimationNodeAnimation.xml index 3f0843c112..75dae6a48e 100644 --- a/doc/classes/AnimationNodeAnimation.xml +++ b/doc/classes/AnimationNodeAnimation.xml @@ -14,7 +14,7 @@ <methods> </methods> <members> - <member name="animation" type="StringName" setter="set_animation" getter="get_animation" default="@"""> + <member name="animation" type="StringName" setter="set_animation" getter="get_animation" default="&"""> Animation to use as an output. It is one of the animations provided by [member AnimationTree.anim_player]. </member> </members> diff --git a/doc/classes/AnimationNodeStateMachineTransition.xml b/doc/classes/AnimationNodeStateMachineTransition.xml index 2f0ebd7de6..7f07afecee 100644 --- a/doc/classes/AnimationNodeStateMachineTransition.xml +++ b/doc/classes/AnimationNodeStateMachineTransition.xml @@ -10,7 +10,7 @@ <methods> </methods> <members> - <member name="advance_condition" type="StringName" setter="set_advance_condition" getter="get_advance_condition" default="@"""> + <member name="advance_condition" type="StringName" setter="set_advance_condition" getter="get_advance_condition" default="&"""> Turn on auto advance when this condition is set. The provided name will become a boolean parameter on the [AnimationTree] that can be controlled from code (see [url=https://docs.godotengine.org/en/latest/tutorials/animation/animation_tree.html#controlling-from-code][/url]). For example, if [member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] is set to [code]"idle"[/code]: [codeblocks] [gdscript] diff --git a/doc/classes/Area2D.xml b/doc/classes/Area2D.xml index f7a116b934..96333988f8 100644 --- a/doc/classes/Area2D.xml +++ b/doc/classes/Area2D.xml @@ -54,7 +54,7 @@ The rate at which objects stop spinning in this area. Represents the angular velocity lost per second. See [member ProjectSettings.physics/2d/default_angular_damp] for more details about damping. </member> - <member name="audio_bus_name" type="StringName" setter="set_audio_bus_name" getter="get_audio_bus_name" default="@"Master""> + <member name="audio_bus_name" type="StringName" setter="set_audio_bus_name" getter="get_audio_bus_name" default="&"Master""> The name of the area's audio bus. </member> <member name="audio_bus_override" type="bool" setter="set_audio_bus_override" getter="is_overriding_audio_bus" default="false"> diff --git a/doc/classes/Area3D.xml b/doc/classes/Area3D.xml index 108387823b..a2724f3f23 100644 --- a/doc/classes/Area3D.xml +++ b/doc/classes/Area3D.xml @@ -52,7 +52,7 @@ The rate at which objects stop spinning in this area. Represents the angular velocity lost per second. See [member ProjectSettings.physics/3d/default_angular_damp] for more details about damping. </member> - <member name="audio_bus_name" type="StringName" setter="set_audio_bus_name" getter="get_audio_bus_name" default="@"Master""> + <member name="audio_bus_name" type="StringName" setter="set_audio_bus_name" getter="get_audio_bus_name" default="&"Master""> The name of the area's audio bus. </member> <member name="audio_bus_override" type="bool" setter="set_audio_bus_override" getter="is_overriding_audio_bus" default="false"> @@ -89,7 +89,7 @@ <member name="reverb_bus_enable" type="bool" setter="set_use_reverb_bus" getter="is_using_reverb_bus" default="false"> If [code]true[/code], the area applies reverb to its associated audio. </member> - <member name="reverb_bus_name" type="StringName" setter="set_reverb_bus" getter="get_reverb_bus" default="@"Master""> + <member name="reverb_bus_name" type="StringName" setter="set_reverb_bus" getter="get_reverb_bus" default="&"Master""> The reverb bus name to use for this area's associated audio. </member> <member name="reverb_bus_uniformity" type="float" setter="set_reverb_uniformity" getter="get_reverb_uniformity" default="0.0"> diff --git a/doc/classes/Array.xml b/doc/classes/Array.xml index 49775fa28b..543ec096c7 100644 --- a/doc/classes/Array.xml +++ b/doc/classes/Array.xml @@ -33,8 +33,8 @@ [/gdscript] [csharp] // Array concatenation is not possible with C# arrays, but is with Godot.Collections.Array. - var array1 = new Godot.Collections.Array("One", 2); - var array2 = new Godot.Collections.Array(3, "Four"); + var array1 = new Godot.Collections.Array{"One", 2}; + var array2 = new Godot.Collections.Array{3, "Four"}; GD.Print(array1 + array2); // Prints [One, 2, 3, Four] [/csharp] [/codeblocks] diff --git a/doc/classes/AudioEffectCompressor.xml b/doc/classes/AudioEffectCompressor.xml index 3117978d8a..4e924bcb65 100644 --- a/doc/classes/AudioEffectCompressor.xml +++ b/doc/classes/AudioEffectCompressor.xml @@ -32,7 +32,7 @@ <member name="release_ms" type="float" setter="set_release_ms" getter="get_release_ms" default="250.0"> Compressor's delay time to stop reducing the signal after the signal level falls below the threshold, in milliseconds. Value can range from 20 to 2000. </member> - <member name="sidechain" type="StringName" setter="set_sidechain" getter="get_sidechain" default="@"""> + <member name="sidechain" type="StringName" setter="set_sidechain" getter="get_sidechain" default="&"""> Reduce the sound level using another audio bus for threshold detection. </member> <member name="threshold" type="float" setter="set_threshold" getter="get_threshold" default="0.0"> diff --git a/doc/classes/AudioStreamPlayer.xml b/doc/classes/AudioStreamPlayer.xml index 113cc64b9d..7c7f7e0cea 100644 --- a/doc/classes/AudioStreamPlayer.xml +++ b/doc/classes/AudioStreamPlayer.xml @@ -60,7 +60,7 @@ <member name="autoplay" type="bool" setter="set_autoplay" getter="is_autoplay_enabled" default="false"> If [code]true[/code], audio plays when added to scene tree. </member> - <member name="bus" type="StringName" setter="set_bus" getter="get_bus" default="@"Master""> + <member name="bus" type="StringName" setter="set_bus" getter="get_bus" default="&"Master""> Bus on which this audio is playing. </member> <member name="mix_target" type="int" setter="set_mix_target" getter="get_mix_target" enum="AudioStreamPlayer.MixTarget" default="0"> diff --git a/doc/classes/AudioStreamPlayer2D.xml b/doc/classes/AudioStreamPlayer2D.xml index e7c276f463..b1e18ab550 100644 --- a/doc/classes/AudioStreamPlayer2D.xml +++ b/doc/classes/AudioStreamPlayer2D.xml @@ -62,7 +62,7 @@ <member name="autoplay" type="bool" setter="set_autoplay" getter="is_autoplay_enabled" default="false"> If [code]true[/code], audio plays when added to scene tree. </member> - <member name="bus" type="StringName" setter="set_bus" getter="get_bus" default="@"Master""> + <member name="bus" type="StringName" setter="set_bus" getter="get_bus" default="&"Master""> Bus on which this audio is playing. </member> <member name="max_distance" type="float" setter="set_max_distance" getter="get_max_distance" default="2000.0"> diff --git a/doc/classes/AudioStreamPlayer3D.xml b/doc/classes/AudioStreamPlayer3D.xml index a1759bd588..3bd20b4b9b 100644 --- a/doc/classes/AudioStreamPlayer3D.xml +++ b/doc/classes/AudioStreamPlayer3D.xml @@ -69,7 +69,7 @@ <member name="autoplay" type="bool" setter="set_autoplay" getter="is_autoplay_enabled" default="false"> If [code]true[/code], audio plays when the AudioStreamPlayer3D node is added to scene tree. </member> - <member name="bus" type="StringName" setter="set_bus" getter="get_bus" default="@"Master""> + <member name="bus" type="StringName" setter="set_bus" getter="get_bus" default="&"Master""> The bus on which this audio is playing. </member> <member name="doppler_tracking" type="int" setter="set_doppler_tracking" getter="get_doppler_tracking" enum="AudioStreamPlayer3D.DopplerTracking" default="0"> diff --git a/doc/classes/BaseMaterial3D.xml b/doc/classes/BaseMaterial3D.xml index 0a7b4c5dab..49edb4c691 100644 --- a/doc/classes/BaseMaterial3D.xml +++ b/doc/classes/BaseMaterial3D.xml @@ -199,7 +199,7 @@ The emitted light's color. See [member emission_enabled]. </member> <member name="emission_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> - If [code]true[/code], the body emits light. Emitting light makes the object appear brighter. The object can also cast light on other objects if a [GIProbe] is used and this object is used in baked lighting. + If [code]true[/code], the body emits light. Emitting light makes the object appear brighter. The object can also cast light on other objects if a [VoxelGI] is used and this object is used in baked lighting. </member> <member name="emission_energy" type="float" setter="set_emission_energy" getter="get_emission_energy" default="1.0"> The emitted light's strength. See [member emission_enabled]. @@ -671,10 +671,7 @@ <constant name="DIFFUSE_LAMBERT_WRAP" value="2" enum="DiffuseMode"> Extends Lambert to cover more than 90 degrees when roughness increases. </constant> - <constant name="DIFFUSE_OREN_NAYAR" value="3" enum="DiffuseMode"> - Attempts to use roughness to emulate microsurfacing. - </constant> - <constant name="DIFFUSE_TOON" value="4" enum="DiffuseMode"> + <constant name="DIFFUSE_TOON" value="3" enum="DiffuseMode"> Uses a hard cut for lighting, with smoothing affected by roughness. </constant> <constant name="SPECULAR_SCHLICK_GGX" value="0" enum="SpecularMode"> diff --git a/doc/classes/Bone2D.xml b/doc/classes/Bone2D.xml index 910d488dfd..93744ddad7 100644 --- a/doc/classes/Bone2D.xml +++ b/doc/classes/Bone2D.xml @@ -19,6 +19,28 @@ Stores the node's current transforms in [member rest]. </description> </method> + <method name="get_autocalculate_length_and_angle" qualifiers="const"> + <return type="bool"> + </return> + <description> + Returns whether this [code]Bone2D[/code] node is going to autocalculate its length and bone angle using its first [code]Bone2D[/code] child node, if one exists. If there are no [code]Bone2D[/code] children, then it cannot autocalculate these values and will print a warning. + </description> + </method> + <method name="get_bone_angle" qualifiers="const"> + <return type="float"> + </return> + <description> + Returns the angle of the bone in the [code]Bone2D[/code] node. + [b]Note:[/b] This is different from the [code]Bone2D[/code]'s rotation. The bone angle is the rotation of the bone shown by the [code]Bone2D[/code] gizmo, and because [code]Bone2D[/code] bones are based on positions, this can vary from the actual rotation of the [code]Bone2D[/code] node. + </description> + </method> + <method name="get_default_length" qualifiers="const"> + <return type="float"> + </return> + <description> + Deprecated. Please use [code]get_length[/code] instead. + </description> + </method> <method name="get_index_in_skeleton" qualifiers="const"> <return type="int"> </return> @@ -26,6 +48,13 @@ Returns the node's index as part of the entire skeleton. See [Skeleton2D]. </description> </method> + <method name="get_length" qualifiers="const"> + <return type="float"> + </return> + <description> + Returns the length of the bone in the [code]Bone2D[/code] node. + </description> + </method> <method name="get_skeleton_rest" qualifiers="const"> <return type="Transform2D"> </return> @@ -33,11 +62,45 @@ Returns the node's [member rest] [code]Transform2D[/code] if it doesn't have a parent, or its rest pose relative to its parent. </description> </method> + <method name="set_autocalculate_length_and_angle"> + <return type="void"> + </return> + <argument index="0" name="auto_calculate" type="bool"> + </argument> + <description> + When set to [code]true[/code], the [code]Bone2D[/code] node will attempt to automatically calculate the bone angle and length using the first child [code]Bone2D[/code] node, if one exists. If none exist, the [code]Bone2D[/code] cannot automatically calculate these values and will print a warning. + </description> + </method> + <method name="set_bone_angle"> + <return type="void"> + </return> + <argument index="0" name="angle" type="float"> + </argument> + <description> + Sets the bone angle for the [code]Bone2D[/code] node. This is typically set to the rotation from the [code]Bone2D[/code] node to a child [code]Bone2D[/code] node. + [b]Note:[/b] This is different from the [code]Bone2D[/code]'s rotation. The bone angle is the rotation of the bone shown by the [code]Bone2D[/code] gizmo, and because [code]Bone2D[/code] bones are based on positions, this can vary from the actual rotation of the [code]Bone2D[/code] node. + </description> + </method> + <method name="set_default_length"> + <return type="void"> + </return> + <argument index="0" name="default_length" type="float"> + </argument> + <description> + Deprecated. Please use [code]set_length[/code] instead. + </description> + </method> + <method name="set_length"> + <return type="void"> + </return> + <argument index="0" name="length" type="float"> + </argument> + <description> + Sets the length of the bone in the [code]Bone2D[/code] node. + </description> + </method> </methods> <members> - <member name="default_length" type="float" setter="set_default_length" getter="get_default_length" default="16.0"> - Length of the bone's representation drawn in the editor's viewport in pixels. - </member> <member name="rest" type="Transform2D" setter="set_rest" getter="get_rest" default="Transform2D( 0, 0, 0, 0, 0, 0 )"> Rest transform of the bone. You can reset the node's transforms to this value using [method apply_rest]. </member> diff --git a/doc/classes/CharacterBody2D.xml b/doc/classes/CharacterBody2D.xml index c3bb3d28e0..0e6ca073a7 100644 --- a/doc/classes/CharacterBody2D.xml +++ b/doc/classes/CharacterBody2D.xml @@ -101,6 +101,9 @@ <member name="floor_max_angle" type="float" setter="set_floor_max_angle" getter="get_floor_max_angle" default="0.785398"> Maximum angle (in radians) where a slope is still considered a floor (or a ceiling), rather than a wall, when calling [method move_and_slide]. The default value equals 45 degrees. </member> + <member name="floor_max_angle_degrees" type="float" setter="set_floor_max_angle_degrees" getter="get_floor_max_angle_degrees" default="45.0"> + Maximum angle (in degrees) where a slope is still considered a floor (or a ceiling), rather than a wall, when calling [method move_and_slide]. + </member> <member name="infinite_inertia" type="bool" setter="set_infinite_inertia_enabled" getter="is_infinite_inertia_enabled" default="true"> If [code]true[/code], the body will be able to push [RigidBody2D] nodes when calling [method move_and_slide], but it also won't detect any collisions with them. If [code]false[/code], it will interact with [RigidBody2D] nodes like with [StaticBody2D]. </member> diff --git a/doc/classes/CharacterBody3D.xml b/doc/classes/CharacterBody3D.xml index 986874df3b..790edfcad1 100644 --- a/doc/classes/CharacterBody3D.xml +++ b/doc/classes/CharacterBody3D.xml @@ -87,6 +87,9 @@ <member name="floor_max_angle" type="float" setter="set_floor_max_angle" getter="get_floor_max_angle" default="0.785398"> Maximum angle (in radians) where a slope is still considered a floor (or a ceiling), rather than a wall, when calling [method move_and_slide]. The default value equals 45 degrees. </member> + <member name="floor_max_angle_degrees" type="float" setter="set_floor_max_angle_degrees" getter="get_floor_max_angle_degrees" default="45.0"> + Maximum angle (in degrees) where a slope is still considered a floor (or a ceiling), rather than a wall, when calling [method move_and_slide]. + </member> <member name="infinite_inertia" type="bool" setter="set_infinite_inertia_enabled" getter="is_infinite_inertia_enabled" default="true"> If [code]true[/code], the body will be able to push [RigidBody3D] nodes when calling [method move_and_slide], but it also won't detect any collisions with them. If [code]false[/code], it will interact with [RigidBody3D] nodes like with [StaticBody3D]. </member> diff --git a/doc/classes/CollisionObject3D.xml b/doc/classes/CollisionObject3D.xml index eb71407cf2..4ab37f5c7b 100644 --- a/doc/classes/CollisionObject3D.xml +++ b/doc/classes/CollisionObject3D.xml @@ -16,14 +16,14 @@ </argument> <argument index="1" name="event" type="InputEvent"> </argument> - <argument index="2" name="click_position" type="Vector3"> + <argument index="2" name="position" type="Vector3"> </argument> - <argument index="3" name="click_normal" type="Vector3"> + <argument index="3" name="normal" type="Vector3"> </argument> <argument index="4" name="shape_idx" type="int"> </argument> <description> - Accepts unhandled [InputEvent]s. [code]click_position[/code] is the clicked location in world space and [code]click_normal[/code] is the normal vector extending from the clicked surface of the [Shape3D] at [code]shape_idx[/code]. Connect to the [code]input_event[/code] signal to easily pick up these events. + Receives unhandled [InputEvent]s. [code]position[/code] is the location in world space of the mouse pointer on the surface of the shape with index [code]shape_idx[/code] and [code]normal[/code] is the normal vector of the surface at that point. Connect to the [signal input_event] signal to easily pick up these events. </description> </method> <method name="create_shape_owner"> @@ -243,14 +243,14 @@ </argument> <argument index="1" name="event" type="InputEvent"> </argument> - <argument index="2" name="click_position" type="Vector3"> + <argument index="2" name="position" type="Vector3"> </argument> - <argument index="3" name="click_normal" type="Vector3"> + <argument index="3" name="normal" type="Vector3"> </argument> <argument index="4" name="shape_idx" type="int"> </argument> <description> - Emitted when [method _input_event] receives an event. See its description for details. + Emitted when the object receives an unhandled [InputEvent]. [code]position[/code] is the location in world space of the mouse pointer on the surface of the shape with index [code]shape_idx[/code] and [code]normal[/code] is the normal vector of the surface at that point. </description> </signal> <signal name="mouse_entered"> diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index a9a230b78f..9c61fca598 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -1055,7 +1055,7 @@ Anchors the right edge of the node to the origin, the center or the end of its parent control. It changes how the right offset updates when the node moves or changes size. You can use one of the [enum Anchor] constants for convenience. </member> <member name="anchor_top" type="float" setter="_set_anchor" getter="get_anchor" default="0.0"> - Anchors the top edge of the node to the origin, the center or the end of its parent control. It changes how the top offset updates when the node moves or changes size. You can use one of the [enum Anchor] constants for convenience. + Anchors the top edge of the node to the origin, the center or the end of its parent control. It changes how the top offset updates when the node moves or changes size. You can use one of the [enum Anchor] constants for convenience. </member> <member name="focus_mode" type="int" setter="set_focus_mode" getter="get_focus_mode" enum="Control.FocusMode" default="0"> The focus access mode for the control (None, Click or All). Only one Control can be focused at the same time, and it will receive keyboard signals. @@ -1067,7 +1067,7 @@ Tells Godot which node it should give keyboard focus to if the user presses the left arrow on the keyboard or left on a gamepad by default. You can change the key by editing the [code]ui_left[/code] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the left of this one. </member> <member name="focus_neighbor_right" type="NodePath" setter="set_focus_neighbor" getter="get_focus_neighbor" default="NodePath("")"> - Tells Godot which node it should give keyboard focus to if the user presses the right arrow on the keyboard or right on a gamepad by default. You can change the key by editing the [code]ui_right[/code] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. + Tells Godot which node it should give keyboard focus to if the user presses the right arrow on the keyboard or right on a gamepad by default. You can change the key by editing the [code]ui_right[/code] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. </member> <member name="focus_neighbor_top" type="NodePath" setter="set_focus_neighbor" getter="get_focus_neighbor" default="NodePath("")"> Tells Godot which node it should give keyboard focus to if the user presses the top arrow on the keyboard or top on a gamepad by default. You can change the key by editing the [code]ui_top[/code] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. @@ -1175,7 +1175,7 @@ <member name="theme" type="Theme" setter="set_theme" getter="get_theme"> The [Theme] resource this node and all its [Control] children use. If a child node has its own [Theme] resource set, theme items are merged with child's definitions having higher priority. </member> - <member name="theme_custom_type" type="StringName" setter="set_theme_custom_type" getter="get_theme_custom_type" default="@"""> + <member name="theme_custom_type" type="StringName" setter="set_theme_custom_type" getter="get_theme_custom_type" default="&"""> The type name used by this [Control] to look up its own theme items. By default, the class name of the node is used (e.g. [code]Button[/code] for the [Button] control), as well as the class names of all parent classes (in order of inheritance). Setting this property gives the highest priority to the type of the specified name, then falls back on the class names. [b]Note:[/b] To look up [Control]'s own items use various [code]get_theme_*[/code] methods without specifying [code]theme_type[/code]. [b]Note:[/b] Theme items are looked for in the tree order, from branch to root, where each [Control] node is checked for its [member theme] property. The earliest match against any type/class name is returned. The project-level Theme and the default Theme are checked last. diff --git a/doc/classes/EditorDebuggerPlugin.xml b/doc/classes/EditorDebuggerPlugin.xml index b97933e582..9484d33252 100644 --- a/doc/classes/EditorDebuggerPlugin.xml +++ b/doc/classes/EditorDebuggerPlugin.xml @@ -38,7 +38,7 @@ <return type="bool"> </return> <description> - Returns [code]true[/code] if there is an instance of the game running with the attached debugger otherwise [code]false[/code]. + Returns [code]true[/code] if there is an instance of the game running with the attached debugger otherwise [code]false[/code]. </description> </method> <method name="register_message_capture"> diff --git a/doc/classes/EditorImportPlugin.xml b/doc/classes/EditorImportPlugin.xml index aa64ab4043..663eb0ff5c 100644 --- a/doc/classes/EditorImportPlugin.xml +++ b/doc/classes/EditorImportPlugin.xml @@ -92,7 +92,7 @@ return new Godot.Collections.Array{new Godot.Collections.Dictionary{{"name", "myOption"}, {"defaultValue", false}}}; } - public override int Import(String sourceFile, String savePath, Godot.Collections.Dictionary options, Godot.Collections.Array platformVariants, Godot.Collections.Array genFiles) + public override int Import(String sourceFile, String savePath, Godot.Collections.Dictionary options, Godot.Collections.Array platformVariants, Godot.Collections.Array genFiles) { var file = new File(); if (file.Open(sourceFile, File.ModeFlags.Read) != Error.Ok) diff --git a/doc/classes/EditorProperty.xml b/doc/classes/EditorProperty.xml index f568263ff8..fd9fae435b 100644 --- a/doc/classes/EditorProperty.xml +++ b/doc/classes/EditorProperty.xml @@ -25,7 +25,7 @@ </argument> <argument index="1" name="value" type="Variant"> </argument> - <argument index="2" name="field" type="StringName" default="@"""> + <argument index="2" name="field" type="StringName" default="&"""> </argument> <argument index="3" name="changing" type="bool" default="false"> </argument> diff --git a/doc/classes/Environment.xml b/doc/classes/Environment.xml index 6909fac2b7..878535a08d 100644 --- a/doc/classes/Environment.xml +++ b/doc/classes/Environment.xml @@ -206,7 +206,7 @@ The depth tolerance for screen-space reflections. </member> <member name="ss_reflections_enabled" type="bool" setter="set_ssr_enabled" getter="is_ssr_enabled" default="false"> - If [code]true[/code], screen-space reflections are enabled. Screen-space reflections are more accurate than reflections from [GIProbe]s or [ReflectionProbe]s, but are slower and can't reflect surfaces occluded by others. + If [code]true[/code], screen-space reflections are enabled. Screen-space reflections are more accurate than reflections from [VoxelGI]s or [ReflectionProbe]s, but are slower and can't reflect surfaces occluded by others. </member> <member name="ss_reflections_fade_in" type="float" setter="set_ssr_fade_in" getter="get_ssr_fade_in" default="0.15"> The fade-in distance for screen-space reflections. Affects the area from the reflected material to the screen-space reflection). diff --git a/doc/classes/InputEventAction.xml b/doc/classes/InputEventAction.xml index ed290fc7e2..42326f344f 100644 --- a/doc/classes/InputEventAction.xml +++ b/doc/classes/InputEventAction.xml @@ -14,7 +14,7 @@ <methods> </methods> <members> - <member name="action" type="StringName" setter="set_action" getter="get_action" default="@"""> + <member name="action" type="StringName" setter="set_action" getter="get_action" default="&"""> The action's name. Actions are accessed via this [String]. </member> <member name="pressed" type="bool" setter="set_pressed" getter="is_pressed" default="false"> diff --git a/doc/classes/Light3D.xml b/doc/classes/Light3D.xml index 6bae612c9f..42b9ed8ab4 100644 --- a/doc/classes/Light3D.xml +++ b/doc/classes/Light3D.xml @@ -52,7 +52,7 @@ The light's strength multiplier (this is not a physical unit). For [OmniLight3D] and [SpotLight3D], changing this value will only change the light color's intensity, not the light's radius. </member> <member name="light_indirect_energy" type="float" setter="set_param" getter="get_param" default="1.0"> - Secondary multiplier used with indirect light (light bounces). Used with [GIProbe]. + Secondary multiplier used with indirect light (light bounces). Used with [VoxelGI]. </member> <member name="light_negative" type="bool" setter="set_negative" getter="is_negative" default="false"> If [code]true[/code], the light's effect is reversed, darkening areas and casting bright shadows. diff --git a/doc/classes/BakedLightmap.xml b/doc/classes/LightmapGI.xml index 6fd08fc4e4..d7722a83b0 100644 --- a/doc/classes/BakedLightmap.xml +++ b/doc/classes/LightmapGI.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="BakedLightmap" inherits="VisualInstance3D" version="4.0"> +<class name="LightmapGI" inherits="VisualInstance3D" version="4.0"> <brief_description> </brief_description> <description> @@ -21,17 +21,17 @@ </member> <member name="environment_custom_sky" type="Sky" setter="set_environment_custom_sky" getter="get_environment_custom_sky"> </member> - <member name="environment_mode" type="int" setter="set_environment_mode" getter="get_environment_mode" enum="BakedLightmap.EnvironmentMode" default="0"> + <member name="environment_mode" type="int" setter="set_environment_mode" getter="get_environment_mode" enum="LightmapGI.EnvironmentMode" default="0"> </member> - <member name="generate_probes_subdiv" type="int" setter="set_generate_probes" getter="get_generate_probes" enum="BakedLightmap.GenerateProbes" default="0"> + <member name="generate_probes_subdiv" type="int" setter="set_generate_probes" getter="get_generate_probes" enum="LightmapGI.GenerateProbes" default="0"> </member> <member name="interior" type="bool" setter="set_interior" getter="is_interior" default="false"> </member> - <member name="light_data" type="BakedLightmapData" setter="set_light_data" getter="get_light_data"> + <member name="light_data" type="LightmapGIData" setter="set_light_data" getter="get_light_data"> </member> <member name="max_texture_size" type="int" setter="set_max_texture_size" getter="get_max_texture_size" default="16384"> </member> - <member name="quality" type="int" setter="set_bake_quality" getter="get_bake_quality" enum="BakedLightmap.BakeQuality" default="1"> + <member name="quality" type="int" setter="set_bake_quality" getter="get_bake_quality" enum="LightmapGI.BakeQuality" default="1"> </member> <member name="use_denoiser" type="bool" setter="set_use_denoiser" getter="is_using_denoiser" default="true"> </member> diff --git a/doc/classes/BakedLightmapData.xml b/doc/classes/LightmapGIData.xml index 904555c48e..3a37c6dcb7 100644 --- a/doc/classes/BakedLightmapData.xml +++ b/doc/classes/LightmapGIData.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="BakedLightmapData" inherits="Resource" version="4.0"> +<class name="LightmapGIData" inherits="Resource" version="4.0"> <brief_description> </brief_description> <description> diff --git a/doc/classes/MultiplayerAPI.xml b/doc/classes/MultiplayerAPI.xml index c168695d61..b2be92dbbd 100644 --- a/doc/classes/MultiplayerAPI.xml +++ b/doc/classes/MultiplayerAPI.xml @@ -135,16 +135,16 @@ </signals> <constants> <constant name="RPC_MODE_DISABLED" value="0" enum="RPCMode"> - Used with [method Node.rpc_config] or [method Node.rset_config] to disable a method or property for all RPC calls, making it unavailable. Default for all methods. + Used with [method Node.rpc_config] to disable a method or property for all RPC calls, making it unavailable. Default for all methods. </constant> <constant name="RPC_MODE_REMOTE" value="1" enum="RPCMode"> - Used with [method Node.rpc_config] or [method Node.rset_config] to set a method to be called or a property to be changed only on the remote end, not locally. Analogous to the [code]remote[/code] keyword. Calls and property changes are accepted from all remote peers, no matter if they are node's master or puppets. + Used with [method Node.rpc_config] to set a method to be called or a property to be changed only on the remote end, not locally. Analogous to the [code]remote[/code] keyword. Calls and property changes are accepted from all remote peers, no matter if they are node's master or puppets. </constant> <constant name="RPC_MODE_MASTER" value="2" enum="RPCMode"> - Used with [method Node.rpc_config] or [method Node.rset_config] to set a method to be called or a property to be changed only on the network master for this node. Analogous to the [code]master[/code] keyword. Only accepts calls or property changes from the node's network puppets, see [method Node.set_network_master]. + Used with [method Node.rpc_config] to set a method to be called or a property to be changed only on the network master for this node. Analogous to the [code]master[/code] keyword. Only accepts calls or property changes from the node's network puppets, see [method Node.set_network_master]. </constant> <constant name="RPC_MODE_PUPPET" value="3" enum="RPCMode"> - Used with [method Node.rpc_config] or [method Node.rset_config] to set a method to be called or a property to be changed only on puppets for this node. Analogous to the [code]puppet[/code] keyword. Only accepts calls or property changes from the node's network master, see [method Node.set_network_master]. + Used with [method Node.rpc_config] to set a method to be called or a property to be changed only on puppets for this node. Analogous to the [code]puppet[/code] keyword. Only accepts calls or property changes from the node's network master, see [method Node.set_network_master]. </constant> <constant name="RPC_MODE_REMOTESYNC" value="4" enum="RPCMode"> Behave like [constant RPC_MODE_REMOTE] but also make the call or property change locally. Analogous to the [code]remotesync[/code] keyword. diff --git a/doc/classes/Node.xml b/doc/classes/Node.xml index 523f3a0c17..1300351e47 100644 --- a/doc/classes/Node.xml +++ b/doc/classes/Node.xml @@ -649,7 +649,7 @@ <argument index="0" name="method" type="StringName"> </argument> <description> - Sends a remote procedure call request for the given [code]method[/code] to peers on the network (and locally), optionally sending all additional arguments as arguments to the method called by the RPC. The call request will only be received by nodes with the same [NodePath], including the exact same node name. Behaviour depends on the RPC configuration for the given method, see [method rpc_config]. Methods are not exposed to RPCs by default. See also [method rset] and [method rset_config] for properties. Returns an empty [Variant]. + Sends a remote procedure call request for the given [code]method[/code] to peers on the network (and locally), optionally sending all additional arguments as arguments to the method called by the RPC. The call request will only be received by nodes with the same [NodePath], including the exact same node name. Behaviour depends on the RPC configuration for the given method, see [method rpc_config]. Methods are not exposed to RPCs by default. Returns an empty [Variant]. [b]Note:[/b] You can only safely use RPCs on clients after you received the [code]connected_to_server[/code] signal from the [SceneTree]. You also need to keep track of the connection state, either by the [SceneTree] signals like [code]server_disconnected[/code] or by checking [code]SceneTree.network_peer.get_connection_status() == CONNECTION_CONNECTED[/code]. </description> </method> @@ -658,33 +658,17 @@ </return> <argument index="0" name="method" type="StringName"> </argument> - <argument index="1" name="mode" type="int" enum="MultiplayerAPI.RPCMode"> + <argument index="1" name="rpc_mode" type="int" enum="MultiplayerAPI.RPCMode"> </argument> - <description> - Changes the RPC mode for the given [code]method[/code] to the given [code]mode[/code]. See [enum MultiplayerAPI.RPCMode]. An alternative is annotating methods and properties with the corresponding keywords ([code]remote[/code], [code]master[/code], [code]puppet[/code], [code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/code]). By default, methods are not exposed to networking (and RPCs). See also [method rset] and [method rset_config] for properties. - </description> - </method> - <method name="rpc_id" qualifiers="vararg"> - <return type="Variant"> - </return> - <argument index="0" name="peer_id" type="int"> + <argument index="2" name="transfer_mode" type="int" enum="NetworkedMultiplayerPeer.TransferMode" default="2"> </argument> - <argument index="1" name="method" type="StringName"> - </argument> - <description> - Sends a [method rpc] to a specific peer identified by [code]peer_id[/code] (see [method NetworkedMultiplayerPeer.set_target_peer]). Returns an empty [Variant]. - </description> - </method> - <method name="rpc_unreliable" qualifiers="vararg"> - <return type="Variant"> - </return> - <argument index="0" name="method" type="StringName"> + <argument index="3" name="channel" type="int" default="0"> </argument> <description> - Sends a [method rpc] using an unreliable protocol. Returns an empty [Variant]. + Changes the RPC mode for the given [code]method[/code] to the given [code]rpc_mode[/code], optionally specifying the [code]transfer_mode[/code] and [code]channel[/code] (on supported peers). See [enum MultiplayerAPI.RPCMode] and [enum NetworkedMultiplayerPeer.TransferMode]. An alternative is annotating methods and properties with the corresponding keywords ([code]remote[/code], [code]master[/code], [code]puppet[/code], [code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/code]). By default, methods are not exposed to networking (and RPCs). </description> </method> - <method name="rpc_unreliable_id" qualifiers="vararg"> + <method name="rpc_id" qualifiers="vararg"> <return type="Variant"> </return> <argument index="0" name="peer_id" type="int"> @@ -692,66 +676,7 @@ <argument index="1" name="method" type="StringName"> </argument> <description> - Sends a [method rpc] to a specific peer identified by [code]peer_id[/code] using an unreliable protocol (see [method NetworkedMultiplayerPeer.set_target_peer]). Returns an empty [Variant]. - </description> - </method> - <method name="rset"> - <return type="void"> - </return> - <argument index="0" name="property" type="StringName"> - </argument> - <argument index="1" name="value" type="Variant"> - </argument> - <description> - Remotely changes a property's value on other peers (and locally). Behaviour depends on the RPC configuration for the given property, see [method rset_config]. See also [method rpc] for RPCs for methods, most information applies to this method as well. - </description> - </method> - <method name="rset_config"> - <return type="int"> - </return> - <argument index="0" name="property" type="StringName"> - </argument> - <argument index="1" name="mode" type="int" enum="MultiplayerAPI.RPCMode"> - </argument> - <description> - Changes the RPC mode for the given [code]property[/code] to the given [code]mode[/code]. See [enum MultiplayerAPI.RPCMode]. An alternative is annotating methods and properties with the corresponding keywords ([code]remote[/code], [code]master[/code], [code]puppet[/code], [code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/code]). By default, properties are not exposed to networking (and RPCs). See also [method rpc] and [method rpc_config] for methods. - </description> - </method> - <method name="rset_id"> - <return type="void"> - </return> - <argument index="0" name="peer_id" type="int"> - </argument> - <argument index="1" name="property" type="StringName"> - </argument> - <argument index="2" name="value" type="Variant"> - </argument> - <description> - Remotely changes the property's value on a specific peer identified by [code]peer_id[/code] (see [method NetworkedMultiplayerPeer.set_target_peer]). - </description> - </method> - <method name="rset_unreliable"> - <return type="void"> - </return> - <argument index="0" name="property" type="StringName"> - </argument> - <argument index="1" name="value" type="Variant"> - </argument> - <description> - Remotely changes the property's value on other peers (and locally) using an unreliable protocol. - </description> - </method> - <method name="rset_unreliable_id"> - <return type="void"> - </return> - <argument index="0" name="peer_id" type="int"> - </argument> - <argument index="1" name="property" type="StringName"> - </argument> - <argument index="2" name="value" type="Variant"> - </argument> - <description> - Remotely changes property's value on a specific peer identified by [code]peer_id[/code] using an unreliable protocol (see [method NetworkedMultiplayerPeer.set_target_peer]). + Sends a [method rpc] to a specific peer identified by [code]peer_id[/code] (see [method NetworkedMultiplayerPeer.set_target_peer]). Returns an empty [Variant]. </description> </method> <method name="set_display_folded"> @@ -969,6 +894,12 @@ <constant name="NOTIFICATION_POST_ENTER_TREE" value="27"> Notification received when the node is ready, just before [constant NOTIFICATION_READY] is received. Unlike the latter, it's sent every time the node enters tree, instead of only once. </constant> + <constant name="NOTIFICATION_EDITOR_PRE_SAVE" value="9001"> + Notification received right before the scene with the node is saved in the editor. This notification is only sent in the Godot editor and will not occur in exported projects. + </constant> + <constant name="NOTIFICATION_EDITOR_POST_SAVE" value="9002"> + Notification received right after the scene with the node is saved in the editor. This notification is only sent in the Godot editor and will not occur in exported projects. + </constant> <constant name="NOTIFICATION_WM_MOUSE_ENTER" value="1002"> Notification received from the OS when the mouse enters the game window. Implemented on desktop and web platforms. diff --git a/doc/classes/OS.xml b/doc/classes/OS.xml index b8b437f78f..c755c73465 100644 --- a/doc/classes/OS.xml +++ b/doc/classes/OS.xml @@ -221,6 +221,13 @@ Returns the path to the current engine executable. </description> </method> + <method name="get_external_data_dir" qualifiers="const"> + <return type="String"> + </return> + <description> + On Android, returns the absolute directory path where user data can be written to external storage if available. On all other platforms, this will return the same location as [method get_user_data_dir]. + </description> + </method> <method name="get_granted_permissions" qualifiers="const"> <return type="PackedStringArray"> </return> diff --git a/doc/classes/PhysicalBone2D.xml b/doc/classes/PhysicalBone2D.xml new file mode 100644 index 0000000000..cea75bad52 --- /dev/null +++ b/doc/classes/PhysicalBone2D.xml @@ -0,0 +1,49 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="PhysicalBone2D" inherits="RigidBody2D" version="4.0"> + <brief_description> + A 2D node that can be used for physically aware bones in 2D. + </brief_description> + <description> + The [code]PhysicalBone2D[/code] node is a [RigidBody2D]-based node that can be used to make [Bone2D] nodes in a [Skeleton2D] react to physics. This node is very similar to the [PhysicalBone3D] node, just for 2D instead of 3D. + [b]Note:[/b] To have the Bone2D nodes visually follow the [code]PhysicalBone2D[/code] node, use a [SkeletonModification2DPhysicalBones] modification on the [Skeleton2D] node with the [Bone2D] nodes. + [b]Note:[/b] The PhysicalBone2D node does not automatically create a [Joint2D] node to keep [code]PhysicalBone2D[/code] nodes together. You will need to create these manually. For most cases, you want to use a [PinJoint2D] node. The [code]PhysicalBone2D[/code] node can automatically configure the [Joint2D] node once it's been created as a child node. + </description> + <tutorials> + </tutorials> + <methods> + <method name="get_joint" qualifiers="const"> + <return type="Joint2D"> + </return> + <description> + Returns the first [Joint2D] child node, if one exists. This is mainly a helper function to make it easier to get the [Joint2D] that the [code]PhysicalBone2D[/code] is autoconfiguring. + </description> + </method> + <method name="is_simulating_physics" qualifiers="const"> + <return type="bool"> + </return> + <description> + Returns a boolean that indicates whether the [code]PhysicalBone2D[/code] node is running and simulating using the Godot 2D physics engine. When [code]true[/code], the PhysicalBone2D node is using physics. + </description> + </method> + </methods> + <members> + <member name="auto_configure_joint" type="bool" setter="set_auto_configure_joint" getter="get_auto_configure_joint" default="true"> + If [code]true[/code], the [code]PhysicalBone2D[/code] node will automatically configure the first [Joint2D] child node. The automatic configuration is limited to setting up the node properties and positioning the [Joint2D]. + </member> + <member name="bone2d_index" type="int" setter="set_bone2d_index" getter="get_bone2d_index" default="-1"> + The index of the [Bone2D] node that this [code]PhysicalBone2D[/code] node is supposed to be simulating. + </member> + <member name="bone2d_nodepath" type="NodePath" setter="set_bone2d_nodepath" getter="get_bone2d_nodepath" default="NodePath("")"> + The [NodePath] to the [Bone2D] node that this [code]PhysicalBone2D[/code] node is supposed to be simulating. + </member> + <member name="follow_bone_when_simulating" type="bool" setter="set_follow_bone_when_simulating" getter="get_follow_bone_when_simulating" default="false"> + If [code]true[/code], the [code]PhysicalBone2D[/code] will keep the transform of the bone it is bound to when simulating physics. + </member> + <member name="simulate_physics" type="bool" setter="set_simulate_physics" getter="get_simulate_physics" default="false"> + If [code]true[/code], the [code]PhysicalBone2D[/code] will start simulating using physics. If [code]false[/code], the [code]PhysicalBone2D[/code] will follow the transform of the [Bone2D] node. + [b]Note:[/b] To have the Bone2D nodes visually follow the [code]PhysicalBone2D[/code] node, use a [SkeletonModification2DPhysicalBones] modification on the [Skeleton2D] node with the [Bone2D] nodes. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/PrimitiveMesh.xml b/doc/classes/PrimitiveMesh.xml index 8b73bcb9c1..3892633654 100644 --- a/doc/classes/PrimitiveMesh.xml +++ b/doc/classes/PrimitiveMesh.xml @@ -31,7 +31,7 @@ </methods> <members> <member name="custom_aabb" type="AABB" setter="set_custom_aabb" getter="get_custom_aabb" default="AABB( 0, 0, 0, 0, 0, 0 )"> - Overrides the [AABB] with one defined by user for use with frustum culling. Especially useful to avoid unexpected culling when using a shader to offset vertices. + Overrides the [AABB] with one defined by user for use with frustum culling. Especially useful to avoid unexpected culling when using a shader to offset vertices. </member> <member name="flip_faces" type="bool" setter="set_flip_faces" getter="get_flip_faces" default="false"> If set, the order of the vertices in each triangle are reversed resulting in the backside of the mesh being drawn. diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index 7d7d744c1b..efd4793b4c 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -1139,8 +1139,6 @@ <member name="layer_names/3d_render/layer_9" type="String" setter="" getter="" default=""""> Optional name for the 3D render layer 9. If left empty, the layer will display as "Layer 9". </member> - <member name="memory/limits/command_queue/multithreading_queue_size_kb" type="int" setter="" getter="" default="256"> - </member> <member name="memory/limits/message_queue/max_size_kb" type="int" setter="" getter="" default="4096"> Godot uses a message queue to defer some function calls. If you run out of space on it (you will see an error), you can increase the size here. </member> @@ -1421,18 +1419,16 @@ </member> <member name="rendering/global_illumination/gi/use_half_resolution" type="bool" setter="" getter="" default="false"> </member> - <member name="rendering/global_illumination/gi_probes/anisotropic" type="bool" setter="" getter="" default="false"> - If [code]true[/code], take additional samples when rendering objects affected by a [GIProbe] to reduce artifacts from only sampling in one direction. - </member> - <member name="rendering/global_illumination/gi_probes/quality" type="int" setter="" getter="" default="1"> - Sets the number of cone samples taken when rendering objects affected by [GIProbe]s. - </member> <member name="rendering/global_illumination/sdfgi/frames_to_converge" type="int" setter="" getter="" default="4"> </member> <member name="rendering/global_illumination/sdfgi/frames_to_update_lights" type="int" setter="" getter="" default="2"> </member> <member name="rendering/global_illumination/sdfgi/probe_ray_count" type="int" setter="" getter="" default="1"> </member> + <member name="rendering/global_illumination/voxel_gi/anisotropic" type="bool" setter="" getter="" default="false"> + </member> + <member name="rendering/global_illumination/voxel_gi/quality" type="int" setter="" getter="" default="1"> + </member> <member name="rendering/lightmapping/bake_performance/max_rays_per_pass" type="int" setter="" getter="" default="32"> </member> <member name="rendering/lightmapping/bake_performance/max_rays_per_probe_pass" type="int" setter="" getter="" default="64"> diff --git a/doc/classes/RDShaderFile.xml b/doc/classes/RDShaderFile.xml index 14e70d53ea..346a97a1c0 100644 --- a/doc/classes/RDShaderFile.xml +++ b/doc/classes/RDShaderFile.xml @@ -10,7 +10,7 @@ <method name="get_bytecode" qualifiers="const"> <return type="RDShaderBytecode"> </return> - <argument index="0" name="version" type="StringName" default="@"""> + <argument index="0" name="version" type="StringName" default="&"""> </argument> <description> </description> @@ -26,7 +26,7 @@ </return> <argument index="0" name="bytecode" type="RDShaderBytecode"> </argument> - <argument index="1" name="version" type="StringName" default="@"""> + <argument index="1" name="version" type="StringName" default="&"""> </argument> <description> </description> diff --git a/doc/classes/ReflectionProbe.xml b/doc/classes/ReflectionProbe.xml index cd08778c89..13df17cd22 100644 --- a/doc/classes/ReflectionProbe.xml +++ b/doc/classes/ReflectionProbe.xml @@ -5,7 +5,7 @@ </brief_description> <description> Captures its surroundings as a cubemap, and stores versions of it with increasing levels of blur to simulate different material roughnesses. - The [ReflectionProbe] is used to create high-quality reflections at the cost of performance. It can be combined with [GIProbe]s and Screen Space Reflections to achieve high quality reflections. [ReflectionProbe]s render all objects within their [member cull_mask], so updating them can be quite expensive. It is best to update them once with the important static objects and then leave them. + The [ReflectionProbe] is used to create high-quality reflections at the cost of performance. It can be combined with [VoxelGI]s and Screen Space Reflections to achieve high quality reflections. [ReflectionProbe]s render all objects within their [member cull_mask], so updating them can be quite expensive. It is best to update them once with the important static objects and then leave them. </description> <tutorials> <link title="Reflection probes">https://docs.godotengine.org/en/latest/tutorials/3d/reflection_probes.html</link> diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml index 02130333f9..ba19176788 100644 --- a/doc/classes/RenderingServer.xml +++ b/doc/classes/RenderingServer.xml @@ -3477,14 +3477,14 @@ <constant name="VIEWPORT_DEBUG_DRAW_NORMAL_BUFFER" value="5" enum="ViewportDebugDraw"> Normal buffer is drawn instead of regular scene so you can see the per-pixel normals that will be used by post-processing effects. </constant> - <constant name="VIEWPORT_DEBUG_DRAW_GI_PROBE_ALBEDO" value="6" enum="ViewportDebugDraw"> - Objects are displayed with only the albedo value from [GIProbe]s. + <constant name="VIEWPORT_DEBUG_DRAW_VOXEL_GI_ALBEDO" value="6" enum="ViewportDebugDraw"> + Objects are displayed with only the albedo value from [VoxelGI]s. </constant> - <constant name="VIEWPORT_DEBUG_DRAW_GI_PROBE_LIGHTING" value="7" enum="ViewportDebugDraw"> - Objects are displayed with only the lighting value from [GIProbe]s. + <constant name="VIEWPORT_DEBUG_DRAW_VOXEL_GI_LIGHTING" value="7" enum="ViewportDebugDraw"> + Objects are displayed with only the lighting value from [VoxelGI]s. </constant> - <constant name="VIEWPORT_DEBUG_DRAW_GI_PROBE_EMISSION" value="8" enum="ViewportDebugDraw"> - Objects are displayed with only the emission color from [GIProbe]s. + <constant name="VIEWPORT_DEBUG_DRAW_VOXEL_GI_EMISSION" value="8" enum="ViewportDebugDraw"> + Objects are displayed with only the emission color from [VoxelGI]s. </constant> <constant name="VIEWPORT_DEBUG_DRAW_SHADOW_ATLAS" value="9" enum="ViewportDebugDraw"> Draws the shadow atlas that stores shadows from [OmniLight3D]s and [SpotLight3D]s in the upper left quadrant of the [Viewport]. @@ -3694,8 +3694,8 @@ <constant name="INSTANCE_DECAL" value="8" enum="InstanceType"> The instance is a decal. </constant> - <constant name="INSTANCE_GI_PROBE" value="9" enum="InstanceType"> - The instance is a GI probe. + <constant name="INSTANCE_VOXEL_GI" value="9" enum="InstanceType"> + The instance is a VoxelGI. </constant> <constant name="INSTANCE_LIGHTMAP" value="10" enum="InstanceType"> The instance is a lightmap. diff --git a/doc/classes/SceneTree.xml b/doc/classes/SceneTree.xml index 06800082cb..7a15153fc2 100644 --- a/doc/classes/SceneTree.xml +++ b/doc/classes/SceneTree.xml @@ -207,6 +207,7 @@ Quits the application at the end of the current iteration. Argument [code]exit_code[/code] can optionally be given (defaulting to 0) to customize the exit status code. By convention, an exit code of [code]0[/code] indicates success whereas a non-zero exit code indicates an error. For portability reasons, the exit code should be set between 0 and 125 (inclusive). + [b]Note:[/b] On iOS this method doesn't work. Instead, as recommended by the iOS Human Interface Guidelines, the user is expected to close apps via the Home button. </description> </method> <method name="reload_current_scene"> diff --git a/doc/classes/Skeleton2D.xml b/doc/classes/Skeleton2D.xml index 0ddbac9ba4..6665a4a9f6 100644 --- a/doc/classes/Skeleton2D.xml +++ b/doc/classes/Skeleton2D.xml @@ -10,6 +10,17 @@ <link title="2D skeletons">https://docs.godotengine.org/en/latest/tutorials/animation/2d_skeletons.html</link> </tutorials> <methods> + <method name="execute_modifications"> + <return type="void"> + </return> + <argument index="0" name="delta" type="float"> + </argument> + <argument index="1" name="execution_mode" type="int"> + </argument> + <description> + Executes all the modifications on the [SkeletonModificationStack2D], if the Skeleton3D has one assigned. + </description> + </method> <method name="get_bone"> <return type="Bone2D"> </return> @@ -26,6 +37,22 @@ Returns the number of [Bone2D] nodes in the node hierarchy parented by Skeleton2D. </description> </method> + <method name="get_bone_local_pose_override"> + <return type="Transform2D"> + </return> + <argument index="0" name="bone_idx" type="int"> + </argument> + <description> + Returns the local pose override transform for [code]bone_idx[/code]. + </description> + </method> + <method name="get_modification_stack" qualifiers="const"> + <return type="SkeletonModificationStack2D"> + </return> + <description> + Returns the [SkeletonModificationStack2D] attached to this skeleton, if one exists. + </description> + </method> <method name="get_skeleton" qualifiers="const"> <return type="RID"> </return> @@ -33,10 +60,37 @@ Returns the [RID] of a Skeleton2D instance. </description> </method> + <method name="set_bone_local_pose_override"> + <return type="void"> + </return> + <argument index="0" name="bone_idx" type="int"> + </argument> + <argument index="1" name="override_pose" type="Transform2D"> + </argument> + <argument index="2" name="strength" type="float"> + </argument> + <argument index="3" name="persistent" type="bool"> + </argument> + <description> + Sets the local pose transform, [code]pose[/code], for the bone at [code]bone_idx[/code]. + [code]amount[/code] is the interpolation strengh that will be used when applying the pose, and [code]persistent[/code] determines if the applied pose will remain. + [b]Note:[/b] The pose transform needs to be a local transform relative to the [Bone2D] node at [code]bone_idx[/code]! + </description> + </method> + <method name="set_modification_stack"> + <return type="void"> + </return> + <argument index="0" name="modification_stack" type="SkeletonModificationStack2D"> + </argument> + <description> + Sets the [SkeletonModificationStack2D] attached to this skeleton. + </description> + </method> </methods> <signals> <signal name="bone_setup_changed"> <description> + Emitted when the [Bone2D] setup attached to this skeletons changes. This is primarily used internally within the skeleton. </description> </signal> </signals> diff --git a/doc/classes/SkeletonIK3D.xml b/doc/classes/SkeletonIK3D.xml index 5949ad54fd..dccc45d0ec 100644 --- a/doc/classes/SkeletonIK3D.xml +++ b/doc/classes/SkeletonIK3D.xml @@ -46,13 +46,13 @@ </member> <member name="override_tip_basis" type="bool" setter="set_override_tip_basis" getter="is_override_tip_basis" default="true"> </member> - <member name="root_bone" type="StringName" setter="set_root_bone" getter="get_root_bone" default="@"""> + <member name="root_bone" type="StringName" setter="set_root_bone" getter="get_root_bone" default="&"""> </member> <member name="target" type="Transform3D" setter="set_target_transform" getter="get_target_transform" default="Transform3D( 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0 )"> </member> <member name="target_node" type="NodePath" setter="set_target_node" getter="get_target_node" default="NodePath("")"> </member> - <member name="tip_bone" type="StringName" setter="set_tip_bone" getter="get_tip_bone" default="@"""> + <member name="tip_bone" type="StringName" setter="set_tip_bone" getter="get_tip_bone" default="&"""> </member> <member name="use_magnet" type="bool" setter="set_use_magnet" getter="is_using_magnet" default="false"> </member> diff --git a/doc/classes/SkeletonModification2D.xml b/doc/classes/SkeletonModification2D.xml new file mode 100644 index 0000000000..8596dac76e --- /dev/null +++ b/doc/classes/SkeletonModification2D.xml @@ -0,0 +1,104 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModification2D" inherits="Resource" version="4.0"> + <brief_description> + A resource that operates on [Bone2D] nodes in a [Skeleton2D]. + </brief_description> + <description> + This resource provides an interface that can be expanded so code that operates on [Bone2D] nodes in a [Skeleton2D] can be mixed and matched together to create complex interactions. + This is used to provide Godot with a flexible and powerful Inverse Kinematics solution that can be adapted for many different uses. + </description> + <tutorials> + </tutorials> + <methods> + <method name="_draw_editor_gizmo" qualifiers="virtual"> + <return type="void"> + </return> + <description> + Used for drawing [b]editor-only[/b] modification gizmos. This function will only be called in the Godot editor and can be overriden to draw custom gizmos. + [b]Note:[/b] You will need to use the Skeleton2D from [method SkeletonModificationStack2D.get_skeleton] and it's draw functions, as the [SkeletonModification2D] resource cannot draw on its own. + </description> + </method> + <method name="_execute" qualifiers="virtual"> + <return type="void"> + </return> + <argument index="0" name="delta" type="float"> + </argument> + <description> + Executes the given modification. This is where the modification performs whatever function it is designed to do. + </description> + </method> + <method name="_setup_modification" qualifiers="virtual"> + <return type="void"> + </return> + <argument index="0" name="modification_stack" type="SkeletonModificationStack2D"> + </argument> + <description> + Called when the modification is setup. This is where the modification performs initialization. + </description> + </method> + <method name="clamp_angle"> + <return type="float"> + </return> + <argument index="0" name="angle" type="float"> + </argument> + <argument index="1" name="min" type="float"> + </argument> + <argument index="2" name="max" type="float"> + </argument> + <argument index="3" name="invert" type="bool"> + </argument> + <description> + Takes a angle and clamps it so it is within the passed-in [code]min[/code] and [code]max[/code] range. [code]invert[/code] will inversely clamp the angle, clamping it to the range outside of the given bounds. + </description> + </method> + <method name="get_editor_draw_gizmo" qualifiers="const"> + <return type="bool"> + </return> + <description> + Returns whether this modification will call [method _draw_editor_gizmo] in the Godot editor to draw modification-specific gizmos. + </description> + </method> + <method name="get_is_setup" qualifiers="const"> + <return type="bool"> + </return> + <description> + Returns whether this modification has been successfully setup or not. + </description> + </method> + <method name="get_modification_stack"> + <return type="SkeletonModificationStack2D"> + </return> + <description> + Returns the [SkeletonModificationStack2D] that this modification is bound to. Through the modification stack, you can access the Skeleton3D the modification is operating on. + </description> + </method> + <method name="set_editor_draw_gizmo"> + <return type="void"> + </return> + <argument index="0" name="draw_gizmo" type="bool"> + </argument> + <description> + Sets whether this modification will call [method _draw_editor_gizmo] in the Godot editor to draw modification-specific gizmos. + </description> + </method> + <method name="set_is_setup"> + <return type="void"> + </return> + <argument index="0" name="is_setup" type="bool"> + </argument> + <description> + Manually allows you to set the setup state of the modification. This function should only rarely be used, as the [SkeletonModificationStack2D] the modification is bound to should handle setting the modification up. + </description> + </method> + </methods> + <members> + <member name="enabled" type="bool" setter="set_enabled" getter="get_enabled" default="true"> + If [code]true[/code], the modification's [method _execute] function will be called by the [SkeletonModificationStack2D]. + </member> + <member name="execution_mode" type="int" setter="set_execution_mode" getter="get_execution_mode" default="0"> + The execution mode for the modification. This tells the modification stack when to execute the modification. Some modifications have settings that are only availible in certain execution modes. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/SkeletonModification2DCCDIK.xml b/doc/classes/SkeletonModification2DCCDIK.xml new file mode 100644 index 0000000000..014d366a42 --- /dev/null +++ b/doc/classes/SkeletonModification2DCCDIK.xml @@ -0,0 +1,170 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModification2DCCDIK" inherits="SkeletonModification2D" version="4.0"> + <brief_description> + A modification that uses CCDIK to manipulate a series of bones to reach a target in 2D. + </brief_description> + <description> + This [SkeletonModification2D] uses an algorithm called [b]C[/b]yclic [b]C[/b]oordinate [b]D[/b]escent [b]I[/b]nverse [b]K[/b]inematics, or CCDIK, to maniuplate a chain of bones in a [Skeleton2D] so it reaches a defined target. + CCDIK works by rotating a set of bones, typically called a "bone chain", on a single axis. Each bone is rotated to face the target from the tip (by default), which over a chain of bones allow it to rotate properly to reach the target. Because the bones only rotate on a single axis, CCDIK [i]can[/i] look more robotic than other IK solvers. + [b]Note:[/b] The CCDIK modifier has [code]ccdik_joints[/code], which are the data objects that hold the data for each joint in the CCDIK chain. This is different from a bone! CCDIK joints hold the data needed for each bone in the bone chain used by CCDIK. + CCDIK also fully supports angle constraints, allowing for more control over how a solution is met. + </description> + <tutorials> + </tutorials> + <methods> + <method name="get_ccdik_joint_bone2d_node" qualifiers="const"> + <return type="NodePath"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the [Bone2D] node assigned to the CCDIK joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_ccdik_joint_bone_index" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the index of the [Bone2D] node assigned to the CCDIK joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_ccdik_joint_constraint_angle_invert" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns whether the CCDIK joint at [code]joint_idx[/code] uses an inverted joint constraint. See [method set_ccdik_joint_constraint_angle_invert] for details. + </description> + </method> + <method name="get_ccdik_joint_constraint_angle_max" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the maximum angle constraint for the joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_ccdik_joint_constraint_angle_min" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the minimum angle constraint for the joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_ccdik_joint_enable_constraint" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns whether angle constraints on the CCDIK joint at [code]joint_idx[/code] are enabled. + </description> + </method> + <method name="get_ccdik_joint_rotate_from_joint" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns whether the joint at [code]joint_idx[/code] is set to rotate from the joint, [code]true[/code], or to rotate from the tip, [code]false[/code]. The default is to rotate from the tip. + </description> + </method> + <method name="set_ccdik_joint_bone2d_node"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="bone2d_nodepath" type="NodePath"> + </argument> + <description> + Sets the [Bone2D] node assigned to the CCDIK joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_ccdik_joint_bone_index"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="bone_idx" type="int"> + </argument> + <description> + Sets the bone index, [code]bone_index[/code], of the CCDIK joint at [code]joint_idx[/code]. When possible, this will also update the [code]bone2d_node[/code] of the CCDIK joint based on data provided by the linked skeleton. + </description> + </method> + <method name="set_ccdik_joint_constraint_angle_invert"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="invert" type="bool"> + </argument> + <description> + Sets whether the CCDIK joint at [code]joint_idx[/code] uses an inverted joint constraint. + An inverted joint constraint only constraints the CCDIK joint to the angles [i]outside of[/i] the inputted minimum and maximum angles. For this reason, it is referred to as an inverted joint constraint, as it constraints the joint to the outside of the inputted values. + </description> + </method> + <method name="set_ccdik_joint_constraint_angle_max"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="angle_max" type="float"> + </argument> + <description> + Sets the maximum angle constraint for the joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_ccdik_joint_constraint_angle_min"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="angle_min" type="float"> + </argument> + <description> + Sets the minimum angle constraint for the joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_ccdik_joint_enable_constraint"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="enable_constraint" type="bool"> + </argument> + <description> + Determines whether angle constraints on the CCDIK joint at [code]joint_idx[/code] are enabled. When [code]true[/code], constraints will be enabled and taken into account when solving. + </description> + </method> + <method name="set_ccdik_joint_rotate_from_joint"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="rotate_from_joint" type="bool"> + </argument> + <description> + Sets whether the joint at [code]joint_idx[/code] is set to rotate from the joint, [code]true[/code], or to rotate from the tip, [code]false[/code]. + </description> + </method> + </methods> + <members> + <member name="ccdik_data_chain_length" type="int" setter="set_ccdik_data_chain_length" getter="get_ccdik_data_chain_length" default="0"> + The amount of CCDIK joints in the CCDIK modification. + </member> + <member name="target_nodepath" type="NodePath" setter="set_target_node" getter="get_target_node" default="NodePath("")"> + The NodePath to the node that is the target for the CCDIK modification. This node is what the CCDIK chain will attempt to rotate the bone chain to. + </member> + <member name="tip_nodepath" type="NodePath" setter="set_tip_node" getter="get_tip_node" default="NodePath("")"> + The end position of the CCDIK chain. Typically, this should be a child of a [Bone2D] node attached to the final [Bone2D] in the CCDIK chain. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/SkeletonModification2DFABRIK.xml b/doc/classes/SkeletonModification2DFABRIK.xml new file mode 100644 index 0000000000..62ab34b06f --- /dev/null +++ b/doc/classes/SkeletonModification2DFABRIK.xml @@ -0,0 +1,108 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModification2DFABRIK" inherits="SkeletonModification2D" version="4.0"> + <brief_description> + A modification that uses FABRIK to manipulate a series of [Bone2D] nodes to reach a target. + </brief_description> + <description> + This [SkeletonModification2D] uses an algorithm called [b]F[/b]orward [b]A[/b]nd [b]B[/b]ackward [b]R[/b]eaching [b]I[/b]nverse [b]K[/b]inematics, or FABRIK, to rotate a bone chain so that it reaches a target. + FABRIK works by knowing the positions and lengths of a series of bones, typically called a "bone chain". It first starts by running a forward pass, which places the final bone at the target's position. Then all other bones are moved towards the tip bone, so they stay at the defined bone length away. Then a backwards pass is performed, where the root/first bone in the FABRIK chain is placed back at the origin. then all other bones are moved so they stay at the defined bone length away. This positions the bone chain so that it reaches the target when possible, but all of the bones stay the correct length away from each other. + Because of how FABRIK works, it often gives more natural results than those seen in [SkeletonModification2DCCDIK]. FABRIK also supports angle constraints, which are fully taken into account when solving. + [b]Note:[/b] The FABRIK modifier has [code]fabrik_joints[/code], which are the data objects that hold the data for each joint in the FABRIK chain. This is different from [Bone2D] nodes! FABRIK joints hold the data needed for each [Bone2D] in the bone chain used by FABRIK. + To help control how the FABRIK joints move, a magnet vector can be passed, which can nudge the bones in a certain direction prior to solving, giving a level of control over the final result. + </description> + <tutorials> + </tutorials> + <methods> + <method name="get_fabrik_joint_bone2d_node" qualifiers="const"> + <return type="NodePath"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the [Bone2D] node assigned to the FABRIK joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_fabrik_joint_bone_index" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the index of the [Bone2D] node assigned to the FABRIK joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_fabrik_joint_magnet_position" qualifiers="const"> + <return type="Vector2"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the magnet position vector for the joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_fabrik_joint_use_target_rotation" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns whether the joint is using the target's rotation rather than allowing FABRIK to rotate the joint. This option only applies to the tip/final joint in the chain. + </description> + </method> + <method name="set_fabrik_joint_bone2d_node"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="bone2d_nodepath" type="NodePath"> + </argument> + <description> + Sets the [Bone2D] node assigned to the FABRIK joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_fabrik_joint_bone_index"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="bone_idx" type="int"> + </argument> + <description> + Sets the bone index, [code]bone_index[/code], of the FABRIK joint at [code]joint_idx[/code]. When possible, this will also update the [code]bone2d_node[/code] of the FABRIK joint based on data provided by the linked skeleton. + </description> + </method> + <method name="set_fabrik_joint_magnet_position"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="magnet_position" type="Vector2"> + </argument> + <description> + Sets the magnet position vector for the joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_fabrik_joint_use_target_rotation"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="use_target_rotation" type="bool"> + </argument> + <description> + Sets whether the joint at [code]joint_idx[/code] will use the target node's rotation rather than letting FABRIK rotate the node. + [b]Note:[/b] This option only works for the tip/final joint in the chain. For all other nodes, this option will be ignored. + </description> + </method> + </methods> + <members> + <member name="fabrik_data_chain_length" type="int" setter="set_fabrik_data_chain_length" getter="get_fabrik_data_chain_length" default="0"> + The amount of FABRIK joints in the FABRIK modification. + </member> + <member name="target_nodepath" type="NodePath" setter="set_target_node" getter="get_target_node" default="NodePath("")"> + The NodePath to the node that is the target for the FABRIK modification. This node is what the FABRIK chain will attempt to rotate the bone chain to. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/SkeletonModification2DJiggle.xml b/doc/classes/SkeletonModification2DJiggle.xml new file mode 100644 index 0000000000..7f8cf2d4d9 --- /dev/null +++ b/doc/classes/SkeletonModification2DJiggle.xml @@ -0,0 +1,232 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModification2DJiggle" inherits="SkeletonModification2D" version="4.0"> + <brief_description> + A modification that jiggles [Bone2D] nodes as they move towards a target. + </brief_description> + <description> + This modification moves a series of bones, typically called a bone chain, towards a target. What makes this modification special is that it calculates the velocity and acceleration for each bone in the bone chain, and runs a very light physics-like calculation using the inputted values. This allows the bones to overshoot the target and "jiggle" around. It can be configured to act more like a spring, or sway around like cloth might. + This modification is useful for adding additional motion to things like hair, the edges of clothing, and more. It has several settings to that allow control over how the joint moves when the target moves. + [b]Note:[/b] The Jiggle modifier has [code]jiggle_joints[/code], which are the data objects that hold the data for each joint in the Jiggle chain. This is different from than [Bone2D] nodes! Jiggle joints hold the data needed for each [Bone2D] in the bone chain used by the Jiggle modification. + </description> + <tutorials> + </tutorials> + <methods> + <method name="get_collision_mask" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the collision mask used by the Jiggle modifier when collisions are enabled. + </description> + </method> + <method name="get_jiggle_joint_bone2d_node" qualifiers="const"> + <return type="NodePath"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the [Bone2D] node assigned to the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_jiggle_joint_bone_index" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the index of the [Bone2D] node assigned to the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_jiggle_joint_damping" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the amount of damping of the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_jiggle_joint_gravity" qualifiers="const"> + <return type="Vector2"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns a [Vector2] representing the amount of gravity the Jiggle joint at [code]joint_idx[/code] is influenced by. + </description> + </method> + <method name="get_jiggle_joint_mass" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the amount of mass of the jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_jiggle_joint_override" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns a boolean that indiciates whether the joint at [code]joint_idx[/code] is overriding the default Jiggle joint data defined in the modification. + </description> + </method> + <method name="get_jiggle_joint_stiffness" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the stiffness of the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="get_jiggle_joint_use_gravity" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns a boolean that indiciates whether the joint at [code]joint_idx[/code] is using gravity or not. + </description> + </method> + <method name="get_use_colliders" qualifiers="const"> + <return type="bool"> + </return> + <description> + Returns whether the jiggle modifier is taking physics colliders into account when solving. + </description> + </method> + <method name="set_collision_mask"> + <return type="void"> + </return> + <argument index="0" name="collision_mask" type="int"> + </argument> + <description> + Sets the collision mask that the Jiggle modifier will use when reacting to colliders, if the Jiggle modifier is set to take colliders into account. + </description> + </method> + <method name="set_jiggle_joint_bone2d_node"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="bone2d_node" type="NodePath"> + </argument> + <description> + Sets the [Bone2D] node assigned to the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_jiggle_joint_bone_index"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="bone_idx" type="int"> + </argument> + <description> + Sets the bone index, [code]bone_index[/code], of the Jiggle joint at [code]joint_idx[/code]. When possible, this will also update the [code]bone2d_node[/code] of the Jiggle joint based on data provided by the linked skeleton. + </description> + </method> + <method name="set_jiggle_joint_damping"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="damping" type="float"> + </argument> + <description> + Sets the amount of dampening of the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_jiggle_joint_gravity"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="gravity" type="Vector2"> + </argument> + <description> + Sets the gravity vector of the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_jiggle_joint_mass"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="mass" type="float"> + </argument> + <description> + Sets the of mass of the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_jiggle_joint_override"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="override" type="bool"> + </argument> + <description> + Sets whether the Jiggle joint at [code]joint_idx[/code] should override the default Jiggle joint settings. Setting this to [code]true[/code] will make the joint use its own settings rather than the default ones attached to the modification. + </description> + </method> + <method name="set_jiggle_joint_stiffness"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="stiffness" type="float"> + </argument> + <description> + Sets the of stiffness of the Jiggle joint at [code]joint_idx[/code]. + </description> + </method> + <method name="set_jiggle_joint_use_gravity"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="use_gravity" type="bool"> + </argument> + <description> + Sets whether the Jiggle joint at [code]joint_idx[/code] should use gravity. + </description> + </method> + <method name="set_use_colliders"> + <return type="void"> + </return> + <argument index="0" name="use_colliders" type="bool"> + </argument> + <description> + If [code]true[/code], the Jiggle modifier will take colliders into account, keeping them from entering into these collision objects. + </description> + </method> + </methods> + <members> + <member name="damping" type="float" setter="set_damping" getter="get_damping" default="0.75"> + The default amount of dampening applied to the Jiggle joints, if they are not overriden. Higher values lead to more of the calculated velocity being applied. + </member> + <member name="gravity" type="Vector2" setter="set_gravity" getter="get_gravity" default="Vector2( 0, 6 )"> + The default amount of gravity applied to the Jiggle joints, if they are not overriden. + </member> + <member name="jiggle_data_chain_length" type="int" setter="set_jiggle_data_chain_length" getter="get_jiggle_data_chain_length" default="0"> + The amount of Jiggle joints in the Jiggle modification. + </member> + <member name="mass" type="float" setter="set_mass" getter="get_mass" default="0.75"> + The default amount of mass assigned to the Jiggle joints, if they are not overriden. Higher values lead to faster movements and more overshooting. + </member> + <member name="stiffness" type="float" setter="set_stiffness" getter="get_stiffness" default="3.0"> + The default amount of stiffness assigned to the Jiggle joints, if they are not overriden. Higher values act more like springs, quickly moving into the correct position. + </member> + <member name="target_nodepath" type="NodePath" setter="set_target_node" getter="get_target_node" default="NodePath("")"> + The NodePath to the node that is the target for the Jiggle modification. This node is what the Jiggle chain will attempt to rotate the bone chain to. + </member> + <member name="use_gravity" type="bool" setter="set_use_gravity" getter="get_use_gravity" default="false"> + Whether the gravity vector, [member gravity], should be applied to the Jiggle joints, assuming they are not overriding the default settings. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/SkeletonModification2DLookAt.xml b/doc/classes/SkeletonModification2DLookAt.xml new file mode 100644 index 0000000000..b0fa0e5a01 --- /dev/null +++ b/doc/classes/SkeletonModification2DLookAt.xml @@ -0,0 +1,107 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModification2DLookAt" inherits="SkeletonModification2D" version="4.0"> + <brief_description> + A modification that rotates a [Bone2D] node to look at a target. + </brief_description> + <description> + This [SkeletonModification2D] rotates a bone to look a target. This is extremely helpful for moving character's head to look at the player, rotating a turret to look at a target, or any other case where you want to make a bone rotate towards something quickly and easily. + </description> + <tutorials> + </tutorials> + <methods> + <method name="get_additional_rotation" qualifiers="const"> + <return type="float"> + </return> + <description> + Returns the amount of additional rotation that is applied after the LookAt modification executes. + </description> + </method> + <method name="get_constraint_angle_invert" qualifiers="const"> + <return type="bool"> + </return> + <description> + Returns whether the constraints to this modification are inverted or not. + </description> + </method> + <method name="get_constraint_angle_max" qualifiers="const"> + <return type="float"> + </return> + <description> + Returns the constraint's maximum allowed angle. + </description> + </method> + <method name="get_constraint_angle_min" qualifiers="const"> + <return type="float"> + </return> + <description> + Returns the constraint's minimum allowed angle. + </description> + </method> + <method name="get_enable_constraint" qualifiers="const"> + <return type="bool"> + </return> + <description> + Returns [code]true[/code] if the LookAt modification is using constraints. + </description> + </method> + <method name="set_additional_rotation"> + <return type="void"> + </return> + <argument index="0" name="rotation" type="float"> + </argument> + <description> + Sets the amount of additional rotation that is to be applied after executing the modification. This allows for offsetting the results by the inputted rotation amount. + </description> + </method> + <method name="set_constraint_angle_invert"> + <return type="void"> + </return> + <argument index="0" name="invert" type="bool"> + </argument> + <description> + When [code]true[/code], the modification will use an inverted joint constraint. + An inverted joint constraint only constraints the [Bone2D] to the angles [i]outside of[/i] the inputted minimum and maximum angles. For this reason, it is referred to as an inverted joint constraint, as it constraints the joint to the outside of the inputted values. + </description> + </method> + <method name="set_constraint_angle_max"> + <return type="void"> + </return> + <argument index="0" name="angle_max" type="float"> + </argument> + <description> + Sets the constraint's maximum allowed angle. + </description> + </method> + <method name="set_constraint_angle_min"> + <return type="void"> + </return> + <argument index="0" name="angle_min" type="float"> + </argument> + <description> + Sets the constraint's minimum allowed angle. + </description> + </method> + <method name="set_enable_constraint"> + <return type="void"> + </return> + <argument index="0" name="enable_constraint" type="bool"> + </argument> + <description> + Sets whether this modification will use constraints or not. When [code]true[/code], constraints will be applied when solving the LookAt modification. + </description> + </method> + </methods> + <members> + <member name="bone2d_node" type="NodePath" setter="set_bone2d_node" getter="get_bone2d_node" default="NodePath("")"> + The [Bone2D] node that the modification will operate on. + </member> + <member name="bone_index" type="int" setter="set_bone_index" getter="get_bone_index" default="-1"> + The index of the [Bone2D] node that the modification will oeprate on. + </member> + <member name="target_nodepath" type="NodePath" setter="set_target_node" getter="get_target_node" default="NodePath("")"> + The NodePath to the node that is the target for the LookAt modification. This node is what the modification will rotate the [Bone2D] to. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/SkeletonModification2DPhysicalBones.xml b/doc/classes/SkeletonModification2DPhysicalBones.xml new file mode 100644 index 0000000000..d8aaf09a8e --- /dev/null +++ b/doc/classes/SkeletonModification2DPhysicalBones.xml @@ -0,0 +1,68 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModification2DPhysicalBones" inherits="SkeletonModification2D" version="4.0"> + <brief_description> + A modification that applies the transforms of [PhysicalBone2D] nodes to [Bone2D] nodes. + </brief_description> + <description> + This modification takes the transforms of [PhysicalBone2D] nodes and applies them to [Bone2D] nodes. This allows the [Bone2D] nodes to react to physics thanks to the linked [PhysicalBone2D] nodes. + </description> + <tutorials> + </tutorials> + <methods> + <method name="fetch_physical_bones"> + <return type="void"> + </return> + <description> + Empties the list of [PhysicalBone2D] nodes and populates it will all [PhysicalBone2D] nodes that are children of the [Skeleton2D]. + </description> + </method> + <method name="get_physical_bone_node" qualifiers="const"> + <return type="NodePath"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <description> + Returns the [PhysicalBone2D] node at [code]joint_idx[/code]. + </description> + </method> + <method name="set_physical_bone_node"> + <return type="void"> + </return> + <argument index="0" name="joint_idx" type="int"> + </argument> + <argument index="1" name="physicalbone2d_node" type="NodePath"> + </argument> + <description> + Sets the [PhysicalBone2D] node at [code]joint_idx[/code]. + [b]Note:[/b] This is just the index used for this modification, not the bone index used in the [Skeleton2D]. + </description> + </method> + <method name="start_simulation"> + <return type="void"> + </return> + <argument index="0" name="bones" type="StringName[]" default="[ ]"> + </argument> + <description> + Tell the [PhysicalBone2D] nodes to start simulating and interacting with the physics world. + Optionally, an array of bone names can be passed to this function, and that will cause only [PhysicalBone2D] nodes with those names to start simulating. + </description> + </method> + <method name="stop_simulation"> + <return type="void"> + </return> + <argument index="0" name="bones" type="StringName[]" default="[ ]"> + </argument> + <description> + Tell the [PhysicalBone2D] nodes to stop simulating and interacting with the physics world. + Optionally, an array of bone names can be passed to this function, and that will cause only [PhysicalBone2D] nodes with those names to stop simulating. + </description> + </method> + </methods> + <members> + <member name="physical_bone_chain_length" type="int" setter="set_physical_bone_chain_length" getter="get_physical_bone_chain_length" default="0"> + The amount of [PhysicalBone2D] nodes linked in this modification. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/SkeletonModification2DStackHolder.xml b/doc/classes/SkeletonModification2DStackHolder.xml new file mode 100644 index 0000000000..313cf81482 --- /dev/null +++ b/doc/classes/SkeletonModification2DStackHolder.xml @@ -0,0 +1,32 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModification2DStackHolder" inherits="SkeletonModification2D" version="4.0"> + <brief_description> + A modification that holds and executes a [SkeletonModificationStack2D]. + </brief_description> + <description> + This [SkeletonModification2D] holds a reference to a [SkeletonModificationStack2D], allowing you to use multiple modification stacks on a single [Skeleton2D]. + [b]Note:[/b] The modifications in the held [SkeletonModificationStack2D] will only be executed if their execution mode matches the execution mode of the SkeletonModification2DStackHolder. + </description> + <tutorials> + </tutorials> + <methods> + <method name="get_held_modification_stack" qualifiers="const"> + <return type="SkeletonModificationStack2D"> + </return> + <description> + Returns the [SkeletonModificationStack2D] that this modification is holding. + </description> + </method> + <method name="set_held_modification_stack"> + <return type="void"> + </return> + <argument index="0" name="held_modification_stack" type="SkeletonModificationStack2D"> + </argument> + <description> + Sets the [SkeletonModificationStack2D] that this modification is holding. This modification stack will then be executed when this modification is executed. + </description> + </method> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/SkeletonModification2DTwoBoneIK.xml b/doc/classes/SkeletonModification2DTwoBoneIK.xml new file mode 100644 index 0000000000..554515556b --- /dev/null +++ b/doc/classes/SkeletonModification2DTwoBoneIK.xml @@ -0,0 +1,94 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModification2DTwoBoneIK" inherits="SkeletonModification2D" version="4.0"> + <brief_description> + A modification that rotates two bones using the law of cosigns to reach the target. + </brief_description> + <description> + This [SkeletonModification2D] uses an algorithm typically called TwoBoneIK. This algorithm works by leveraging the law of cosigns and the lengths of the bones to figure out what rotation the bones currently have, and what rotation they need to make a complete triangle, where the first bone, the second bone, and the target form the three verticies of the triangle. Because the algorithm works by making a triangle, it can only opperate on two bones. + TwoBoneIK is great for arms, legs, and really any joints that can be represented by just two bones that bend to reach a target. This solver is more lightweight than [SkeletonModification2DFABRIK], but gives similar, natural looking results. + </description> + <tutorials> + </tutorials> + <methods> + <method name="get_joint_one_bone2d_node" qualifiers="const"> + <return type="NodePath"> + </return> + <description> + Returns the [Bone2D] node that is being used as the first bone in the TwoBoneIK modification. + </description> + </method> + <method name="get_joint_one_bone_idx" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the index of the [Bone2D] node that is being used as the first bone in the TwoBoneIK modification. + </description> + </method> + <method name="get_joint_two_bone2d_node" qualifiers="const"> + <return type="NodePath"> + </return> + <description> + Returns the [Bone2D] node that is being used as the second bone in the TwoBoneIK modification. + </description> + </method> + <method name="get_joint_two_bone_idx" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the index of the [Bone2D] node that is being used as the second bone in the TwoBoneIK modification. + </description> + </method> + <method name="set_joint_one_bone2d_node"> + <return type="void"> + </return> + <argument index="0" name="bone2d_node" type="NodePath"> + </argument> + <description> + Sets the [Bone2D] node that is being used as the first bone in the TwoBoneIK modification. + </description> + </method> + <method name="set_joint_one_bone_idx"> + <return type="void"> + </return> + <argument index="0" name="bone_idx" type="int"> + </argument> + <description> + Sets the index of the [Bone2D] node that is being used as the first bone in the TwoBoneIK modification. + </description> + </method> + <method name="set_joint_two_bone2d_node"> + <return type="void"> + </return> + <argument index="0" name="bone2d_node" type="NodePath"> + </argument> + <description> + Sets the [Bone2D] node that is being used as the second bone in the TwoBoneIK modification. + </description> + </method> + <method name="set_joint_two_bone_idx"> + <return type="void"> + </return> + <argument index="0" name="bone_idx" type="int"> + </argument> + <description> + Sets the index of the [Bone2D] node that is being used as the second bone in the TwoBoneIK modification. + </description> + </method> + </methods> + <members> + <member name="flip_bend_direction" type="bool" setter="set_flip_bend_direction" getter="get_flip_bend_direction" default="false"> + If [code]true[/code], the bones in the modification will blend outward as opposed to inwards when contracting. If [code]false[/code], the bones will bend inwards when contracting. + </member> + <member name="target_maximum_distance" type="float" setter="set_target_maximum_distance" getter="get_target_maximum_distance" default="0.0"> + The maximum distance the target can be at. If the target is farther than this distance, the modification will solve as if it's at this maximum distance. When set to [code]0[/code], the modification will solve without distance constraints. + </member> + <member name="target_minimum_distance" type="float" setter="set_target_minimum_distance" getter="get_target_minimum_distance" default="0.0"> + The minimum distance the target can be at. If the target is closer than this distance, the modification will solve as if it's at this minimum distance. When set to [code]0[/code], the modification will solve without distance constraints. + </member> + <member name="target_nodepath" type="NodePath" setter="set_target_node" getter="get_target_node" default="NodePath("")"> + The NodePath to the node that is the target for the TwoBoneIK modification. This node is what the modification will use when bending the [Bone2D] nodes. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/SkeletonModificationStack2D.xml b/doc/classes/SkeletonModificationStack2D.xml new file mode 100644 index 0000000000..35b899fe08 --- /dev/null +++ b/doc/classes/SkeletonModificationStack2D.xml @@ -0,0 +1,108 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SkeletonModificationStack2D" inherits="Resource" version="4.0"> + <brief_description> + A resource that holds a stack of [SkeletonModification2D]s. + </brief_description> + <description> + This resource is used by the Skeleton and holds a stack of [SkeletonModification2D]s. + This controls the order of the modifications and how they are applied. Modification order is especially important for full-body IK setups, as you need to execute the modifications in the correct order to get the desired results. For example, you want to execute a modification on the spine [i]before[/i] the arms on a humanoid skeleton. + This resource also controls how strongly all of the modifications are applied to the [Skeleton2D]. + </description> + <tutorials> + </tutorials> + <methods> + <method name="add_modification"> + <return type="void"> + </return> + <argument index="0" name="modification" type="SkeletonModification2D"> + </argument> + <description> + Adds the passed-in [SkeletonModification2D] to the stack. + </description> + </method> + <method name="delete_modification"> + <return type="void"> + </return> + <argument index="0" name="mod_idx" type="int"> + </argument> + <description> + Deletes the [SkeletonModification2D] at the index position [code]mod_idx[/code], if it exists. + </description> + </method> + <method name="enable_all_modifications"> + <return type="void"> + </return> + <argument index="0" name="enabled" type="bool"> + </argument> + <description> + Enables all [SkeletonModification2D]s in the stack. + </description> + </method> + <method name="execute"> + <return type="void"> + </return> + <argument index="0" name="delta" type="float"> + </argument> + <argument index="1" name="execution_mode" type="int"> + </argument> + <description> + Executes all of the [SkeletonModification2D]s in the stack that use the same execution mode as the passed-in [code]execution_mode[/code], starting from index [code]0[/code] to [member modification_count]. + [b]Note:[/b] The order of the modifications can matter depending on the modifications. For example, modifications on a spine should operate before modifications on the arms in order to get proper results. + </description> + </method> + <method name="get_is_setup" qualifiers="const"> + <return type="bool"> + </return> + <description> + Returns a boolean that indiciates whether the modification stack is setup and can execute. + </description> + </method> + <method name="get_modification" qualifiers="const"> + <return type="SkeletonModification2D"> + </return> + <argument index="0" name="mod_idx" type="int"> + </argument> + <description> + Returns the [SkeletonModification2D] at the passed-in index, [code]mod_idx[/code]. + </description> + </method> + <method name="get_skeleton" qualifiers="const"> + <return type="Skeleton2D"> + </return> + <description> + Returns the [Skeleton2D] node that the SkeletonModificationStack2D is bound to. + </description> + </method> + <method name="set_modification"> + <return type="void"> + </return> + <argument index="0" name="mod_idx" type="int"> + </argument> + <argument index="1" name="modification" type="SkeletonModification2D"> + </argument> + <description> + Sets the modification at [code]mod_idx[/code] to the passed-in modification, [code]modification[/code]. + </description> + </method> + <method name="setup"> + <return type="void"> + </return> + <description> + Sets up the modification stack so it can execute. This function should be called by [Skeleton2D] and shouldn't be manually called unless you know what you are doing. + </description> + </method> + </methods> + <members> + <member name="enabled" type="bool" setter="set_enabled" getter="get_enabled" default="false"> + If [code]true[/code], the modification's in the stack will be called. This is handled automatically through the [Skeleton2D] node. + </member> + <member name="modification_count" type="int" setter="set_modification_count" getter="get_modification_count" default="0"> + The number of modifications in the stack. + </member> + <member name="strength" type="float" setter="set_strength" getter="get_strength" default="1.0"> + The interpolation strength of the modifications in stack. A value of [code]0[/code] will make it where the modifications are not applied, a strength of [code]0.5[/code] will be half applied, and a strength of [code]1[/code] will allow the modifications to be fully applied and override the [Skeleton2D] [Bone2D] poses. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/TextServer.xml b/doc/classes/TextServer.xml index fe63e434c9..9a96d8699c 100644 --- a/doc/classes/TextServer.xml +++ b/doc/classes/TextServer.xml @@ -976,7 +976,7 @@ </argument> <description> Returns [code]true[/code] if text buffer is configured to display hexadecimal codes in place of invalid characters. - Note: If set to [code]false[/code], nothing is displayed in place of invalid characters. + Note: If set to [code]false[/code], nothing is displayed in place of invalid characters. </description> </method> <method name="shaped_text_get_range" qualifiers="const"> diff --git a/doc/classes/Transform2D.xml b/doc/classes/Transform2D.xml index e748ceb281..0dbf95376a 100644 --- a/doc/classes/Transform2D.xml +++ b/doc/classes/Transform2D.xml @@ -129,6 +129,16 @@ Returns [code]true[/code] if this transform and [code]transform[/code] are approximately equal, by calling [code]is_equal_approx[/code] on each component. </description> </method> + <method name="looking_at" qualifiers="const"> + <return type="Transform2D"> + </return> + <argument index="0" name="target" type="Vector2" default="Transform2D( 1, 0, 0, 1, 0, 0 )"> + </argument> + <description> + Returns a copy of the transform rotated such that it's rotation on the X-axis points towards the [code]target[/code] position. + Operations take place in global space. + </description> + </method> <method name="operator !=" qualifiers="operator"> <return type="bool"> </return> @@ -138,33 +148,33 @@ </description> </method> <method name="operator *" qualifiers="operator"> - <return type="Vector2"> + <return type="PackedVector2Array"> </return> - <argument index="0" name="right" type="Vector2"> + <argument index="0" name="right" type="PackedVector2Array"> </argument> <description> </description> </method> <method name="operator *" qualifiers="operator"> - <return type="Rect2"> + <return type="Transform2D"> </return> - <argument index="0" name="right" type="Rect2"> + <argument index="0" name="right" type="Transform2D"> </argument> <description> </description> </method> <method name="operator *" qualifiers="operator"> - <return type="Transform2D"> + <return type="Rect2"> </return> - <argument index="0" name="right" type="Transform2D"> + <argument index="0" name="right" type="Rect2"> </argument> <description> </description> </method> <method name="operator *" qualifiers="operator"> - <return type="PackedVector2Array"> + <return type="Vector2"> </return> - <argument index="0" name="right" type="PackedVector2Array"> + <argument index="0" name="right" type="Vector2"> </argument> <description> </description> @@ -210,6 +220,15 @@ Scales the transform by the given scale factor, using matrix multiplication. </description> </method> + <method name="set_rotation"> + <return type="void"> + </return> + <argument index="0" name="rotation" type="float"> + </argument> + <description> + Sets the transform's rotation (in radians). + </description> + </method> <method name="translated" qualifiers="const"> <return type="Transform2D"> </return> diff --git a/doc/classes/Variant.xml b/doc/classes/Variant.xml index 775bd58bcf..5882074698 100644 --- a/doc/classes/Variant.xml +++ b/doc/classes/Variant.xml @@ -5,20 +5,30 @@ </brief_description> <description> In computer programming, a Variant class is a class that is designed to store a variety of other types. Dynamic programming languages like PHP, Lua, JavaScript and GDScript like to use them to store variables' data on the backend. With these Variants, properties are able to change value types freely. - [codeblock] + [codeblocks] + [gdscript] var foo = 2 # foo is dynamically an integer foo = "Now foo is a string!" foo = Reference.new() # foo is an Object var bar: int = 2 # bar is a statically typed integer. # bar = "Uh oh! I can't make static variables become a different type!" - [/codeblock] + [/gdscript] + [csharp] + // ... but C# is statically typed. Once a variable has a type it cannot be changed. However you can use the var keyword in methods to let the compiler decide the type automatically. + var foo = 2; // Foo is a 32-bit integer (int). Be cautious, integers in GDScript are 64-bit and the direct C# equivalent is "long". + // foo = "foo was and will always be an integer. It cannot be turned into a string!"; + var boo = "Boo is a string!"; + var ref = new Reference(); // var is especially useful when used together with a constructor. + [/csharp] + [/codeblocks] Godot tracks all scripting API variables within Variants. Without even realizing it, you use Variants all the time. When a particular language enforces its own rules for keeping data typed, then that language is applying its own custom logic over the base Variant scripting API. - GDScript automatically wrap values in them. It keeps all data in plain Variants by default and then optionally enforces custom static typing rules on variable types. - VisualScript tracks properties inside Variants as well, but it also uses static typing. The GUI interface enforces that properties have a particular type that doesn't change over time. - C# is statically typed, but uses the Mono [code]object[/code] type in place of Godot's Variant class when it needs to represent a dynamic value. [code]object[/code] is the Mono runtime's equivalent of the same concept. - The statically-typed language NativeScript C++ does not define a built-in Variant-like class. Godot's GDNative bindings provide their own godot::Variant class for users; Any point at which the C++ code starts interacting with the Godot runtime is a place where you might have to start wrapping data inside Variant objects. The global [method @GlobalScope.typeof] function returns the enumerated value of the Variant type stored in the current variable (see [enum Variant.Type]). - [codeblock] + [codeblocks] + [gdscript] var foo = 2 match typeof(foo): TYPE_NIL: @@ -32,7 +42,19 @@ # Note also that there is not yet any way to get a script's `class_name` string easily. # To fetch that value, you need to dig deeply into a hidden ProjectSettings setting: an Array of Dictionaries called "_global_script_classes". # Open your project.godot file to see it up close. - [/codeblock] + [/gdscript] + [csharp] + int foo = 2; + if (foo == null) + { + GD.Print("foo is null"); + } + if (foo is int) + { + GD.Print("foo is an integer"); + } + [/csharp] + [/codeblocks] A Variant takes up only 20 bytes and can store almost any engine datatype inside of it. Variants are rarely used to hold information for long periods of time. Instead, they are used mainly for communication, editing, serialization and moving data around. Godot has specifically invested in making its Variant class as flexible as possible; so much so that it is used for a multitude of operations to facilitate communication between all of Godot's systems. A Variant: diff --git a/doc/classes/VideoPlayer.xml b/doc/classes/VideoPlayer.xml index d905ce4054..12558ebbbc 100644 --- a/doc/classes/VideoPlayer.xml +++ b/doc/classes/VideoPlayer.xml @@ -60,7 +60,7 @@ <member name="buffering_msec" type="int" setter="set_buffering_msec" getter="get_buffering_msec" default="500"> Amount of time in milliseconds to store in buffer while playing. </member> - <member name="bus" type="StringName" setter="set_bus" getter="get_bus" default="@"Master""> + <member name="bus" type="StringName" setter="set_bus" getter="get_bus" default="&"Master""> Audio bus to use for sound playback. </member> <member name="expand" type="bool" setter="set_expand" getter="has_expand" default="true"> diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index 1c33274cb0..2f3782c517 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -81,10 +81,16 @@ <description> Returns the viewport's texture. [b]Note:[/b] Due to the way OpenGL works, the resulting [ViewportTexture] is flipped vertically. You can use [method Image.flip_y] on the result of [method Texture2D.get_image] to flip it back, for example: - [codeblock] + [codeblocks] + [gdscript] var img = get_viewport().get_texture().get_image() img.flip_y() - [/codeblock] + [/gdscript] + [csharp] + Image img = GetViewport().GetTexture().GetImage(); + img.FlipY(); + [/csharp] + [/codeblocks] </description> </method> <method name="get_viewport_rid" qualifiers="const"> @@ -382,14 +388,14 @@ </constant> <constant name="DEBUG_DRAW_NORMAL_BUFFER" value="5" enum="DebugDraw"> </constant> - <constant name="DEBUG_DRAW_GI_PROBE_ALBEDO" value="6" enum="DebugDraw"> - Objects are displayed with only the albedo value from [GIProbe]s. + <constant name="DEBUG_DRAW_VOXEL_GI_ALBEDO" value="6" enum="DebugDraw"> + Objects are displayed with only the albedo value from [VoxelGI]s. </constant> - <constant name="DEBUG_DRAW_GI_PROBE_LIGHTING" value="7" enum="DebugDraw"> - Objects are displayed with only the lighting value from [GIProbe]s. + <constant name="DEBUG_DRAW_VOXEL_GI_LIGHTING" value="7" enum="DebugDraw"> + Objects are displayed with only the lighting value from [VoxelGI]s. </constant> - <constant name="DEBUG_DRAW_GI_PROBE_EMISSION" value="8" enum="DebugDraw"> - Objects are displayed with only the emission color from [GIProbe]s. + <constant name="DEBUG_DRAW_VOXEL_GI_EMISSION" value="8" enum="DebugDraw"> + Objects are displayed with only the emission color from [VoxelGI]s. </constant> <constant name="DEBUG_DRAW_SHADOW_ATLAS" value="9" enum="DebugDraw"> Draws the shadow atlas that stores shadows from [OmniLight3D]s and [SpotLight3D]s in the upper left quadrant of the [Viewport]. diff --git a/doc/classes/VisualShader.xml b/doc/classes/VisualShader.xml index ff00a848b9..775ac88eff 100644 --- a/doc/classes/VisualShader.xml +++ b/doc/classes/VisualShader.xml @@ -222,15 +222,19 @@ <constant name="TYPE_LIGHT" value="2" enum="Type"> A shader for light calculations. </constant> - <constant name="TYPE_EMIT" value="3" enum="Type"> + <constant name="TYPE_START" value="3" enum="Type"> </constant> <constant name="TYPE_PROCESS" value="4" enum="Type"> </constant> - <constant name="TYPE_END" value="5" enum="Type"> + <constant name="TYPE_COLLIDE" value="5" enum="Type"> </constant> - <constant name="TYPE_SKY" value="6" enum="Type"> + <constant name="TYPE_START_CUSTOM" value="6" enum="Type"> </constant> - <constant name="TYPE_MAX" value="7" enum="Type"> + <constant name="TYPE_PROCESS_CUSTOM" value="7" enum="Type"> + </constant> + <constant name="TYPE_SKY" value="8" enum="Type"> + </constant> + <constant name="TYPE_MAX" value="9" enum="Type"> Represents the size of the [enum Type] enum. </constant> <constant name="NODE_ID_INVALID" value="-1"> diff --git a/doc/classes/VisualShaderNode.xml b/doc/classes/VisualShaderNode.xml index 6327ab534f..9a74f2322e 100644 --- a/doc/classes/VisualShaderNode.xml +++ b/doc/classes/VisualShaderNode.xml @@ -9,6 +9,13 @@ <link title="VisualShaders">https://docs.godotengine.org/en/latest/tutorials/shading/visual_shaders.html</link> </tutorials> <methods> + <method name="clear_default_input_values"> + <return type="void"> + </return> + <description> + Clears the default input ports value. + </description> + </method> <method name="get_default_input_values" qualifiers="const"> <return type="Array"> </return> @@ -25,6 +32,15 @@ Returns the default value of the input [code]port[/code]. </description> </method> + <method name="remove_input_port_default_value"> + <return type="void"> + </return> + <argument index="0" name="port" type="int"> + </argument> + <description> + Removes the default value of the input [code]port[/code]. + </description> + </method> <method name="set_default_input_values"> <return type="void"> </return> diff --git a/doc/classes/VisualShaderNodeParticleAccelerator.xml b/doc/classes/VisualShaderNodeParticleAccelerator.xml new file mode 100644 index 0000000000..82aae1df63 --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleAccelerator.xml @@ -0,0 +1,25 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleAccelerator" inherits="VisualShaderNodeOutput" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="mode" type="int" setter="set_mode" getter="get_mode" enum="VisualShaderNodeParticleAccelerator.Mode" default="0"> + </member> + </members> + <constants> + <constant name="MODE_LINEAR" value="0" enum="Mode"> + </constant> + <constant name="MODE_RADIAL" value="1" enum="Mode"> + </constant> + <constant name="MODE_TANGENTIAL" value="2" enum="Mode"> + </constant> + <constant name="MODE_MAX" value="3" enum="Mode"> + </constant> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleBoxEmitter.xml b/doc/classes/VisualShaderNodeParticleBoxEmitter.xml new file mode 100644 index 0000000000..af33b285d2 --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleBoxEmitter.xml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleBoxEmitter" inherits="VisualShaderNodeParticleEmitter" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleConeVelocity.xml b/doc/classes/VisualShaderNodeParticleConeVelocity.xml new file mode 100644 index 0000000000..7a40c2a7d0 --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleConeVelocity.xml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleConeVelocity" inherits="VisualShaderNode" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleEmit.xml b/doc/classes/VisualShaderNodeParticleEmit.xml new file mode 100644 index 0000000000..120b12d643 --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleEmit.xml @@ -0,0 +1,27 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleEmit" inherits="VisualShaderNode" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="flags" type="int" setter="set_flags" getter="get_flags" enum="VisualShaderNodeParticleEmit.EmitFlags" default="31"> + </member> + </members> + <constants> + <constant name="EMIT_FLAG_POSITION" value="1" enum="EmitFlags"> + </constant> + <constant name="EMIT_FLAG_ROT_SCALE" value="2" enum="EmitFlags"> + </constant> + <constant name="EMIT_FLAG_VELOCITY" value="4" enum="EmitFlags"> + </constant> + <constant name="EMIT_FLAG_COLOR" value="8" enum="EmitFlags"> + </constant> + <constant name="EMIT_FLAG_CUSTOM" value="16" enum="EmitFlags"> + </constant> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleEmitter.xml b/doc/classes/VisualShaderNodeParticleEmitter.xml new file mode 100644 index 0000000000..3a25fc1c7f --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleEmitter.xml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleEmitter" inherits="VisualShaderNode" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleMultiplyByAxisAngle.xml b/doc/classes/VisualShaderNodeParticleMultiplyByAxisAngle.xml new file mode 100644 index 0000000000..89a53699c9 --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleMultiplyByAxisAngle.xml @@ -0,0 +1,17 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleMultiplyByAxisAngle" inherits="VisualShaderNode" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="degrees_mode" type="bool" setter="set_degrees_mode" getter="is_degrees_mode" default="true"> + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleOutput.xml b/doc/classes/VisualShaderNodeParticleOutput.xml new file mode 100644 index 0000000000..c8fc66f2ff --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleOutput.xml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleOutput" inherits="VisualShaderNodeOutput" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleRandomness.xml b/doc/classes/VisualShaderNodeParticleRandomness.xml new file mode 100644 index 0000000000..f19723a663 --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleRandomness.xml @@ -0,0 +1,23 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleRandomness" inherits="VisualShaderNode" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="op_type" type="int" setter="set_op_type" getter="get_op_type" enum="VisualShaderNodeParticleRandomness.OpType" default="0"> + </member> + </members> + <constants> + <constant name="OP_TYPE_SCALAR" value="0" enum="OpType"> + </constant> + <constant name="OP_TYPE_VECTOR" value="1" enum="OpType"> + </constant> + <constant name="OP_TYPE_MAX" value="2" enum="OpType"> + </constant> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleRingEmitter.xml b/doc/classes/VisualShaderNodeParticleRingEmitter.xml new file mode 100644 index 0000000000..ee3fbe7faf --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleRingEmitter.xml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleRingEmitter" inherits="VisualShaderNodeParticleEmitter" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeParticleSphereEmitter.xml b/doc/classes/VisualShaderNodeParticleSphereEmitter.xml new file mode 100644 index 0000000000..d43ac518cf --- /dev/null +++ b/doc/classes/VisualShaderNodeParticleSphereEmitter.xml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeParticleSphereEmitter" inherits="VisualShaderNodeParticleEmitter" version="4.0"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeUVFunc.xml b/doc/classes/VisualShaderNodeUVFunc.xml new file mode 100644 index 0000000000..042644feb0 --- /dev/null +++ b/doc/classes/VisualShaderNodeUVFunc.xml @@ -0,0 +1,28 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeUVFunc" inherits="VisualShaderNode" version="4.0"> + <brief_description> + Contains functions to modify texture coordinates ([code]uv[/code]) to be used within the visual shader graph. + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="function" type="int" setter="set_function" getter="get_function" enum="VisualShaderNodeUVFunc.Function" default="0"> + A function to be applied to the texture coordinates. See [enum Function] for options. + </member> + </members> + <constants> + <constant name="FUNC_PANNING" value="0" enum="Function"> + Translates [code]uv[/code] by using [code]scale[/code] and [code]offset[/code] values using the following formula: [code]uv = uv + offset * scale[/code]. [code]uv[/code] port is connected to [code]UV[/code] built-in by default. + </constant> + <constant name="FUNC_SCALING" value="1" enum="Function"> + Scales [code]uv[/uv] by using [code]scale[/code] and [code]pivot[/code] values using the following formula: [code]uv = (uv - pivot) * scale + pivot[/code]. [code]uv[/code] port is connected to [code]UV[/code] built-in by default. + </constant> + <constant name="FUNC_MAX" value="2" enum="Function"> + Represents the size of the [enum Function] enum. + </constant> + </constants> +</class> diff --git a/doc/classes/GIProbe.xml b/doc/classes/VoxelGI.xml index 4f56d1ad3e..fa5035349e 100644 --- a/doc/classes/GIProbe.xml +++ b/doc/classes/VoxelGI.xml @@ -1,15 +1,15 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="GIProbe" inherits="VisualInstance3D" version="4.0"> +<class name="VoxelGI" inherits="VisualInstance3D" version="4.0"> <brief_description> Real-time global illumination (GI) probe. </brief_description> <description> - [GIProbe]s are used to provide high-quality real-time indirect light to scenes. They precompute the effect of objects that emit light and the effect of static geometry to simulate the behavior of complex light in real-time. [GIProbe]s need to be baked before using, however, once baked, dynamic objects will receive light from them. Further, lights can be fully dynamic or baked. - Having [GIProbe]s in a scene can be expensive, the quality of the probe can be turned down in exchange for better performance in the [ProjectSettings] using [member ProjectSettings.rendering/global_illumination/gi_probes/quality]. + [VoxelGI]s are used to provide high-quality real-time indirect light to scenes. They precompute the effect of objects that emit light and the effect of static geometry to simulate the behavior of complex light in real-time. [VoxelGI]s need to be baked before using, however, once baked, dynamic objects will receive light from them. Further, lights can be fully dynamic or baked. + Having [VoxelGI]s in a scene can be expensive, the quality of the probe can be turned down in exchange for better performance in the [ProjectSettings] using [member ProjectSettings.rendering/global_illumination/voxel_gi/quality]. [b]Note:[/b] Meshes should have sufficiently thick walls to avoid light leaks (avoid one-sided walls). For interior levels, enclose your level geometry in a sufficiently large box and bridge the loops to close the mesh. </description> <tutorials> - <link title="GI probes">https://docs.godotengine.org/en/latest/tutorials/3d/gi_probes.html</link> + <link title="GI probes">https://docs.godotengine.org/en/latest/tutorials/3d/voxel_gi.html</link> <link title="Third Person Shooter Demo">https://godotengine.org/asset-library/asset/678</link> </tutorials> <methods> @@ -21,7 +21,7 @@ <argument index="1" name="create_visual_debug" type="bool" default="false"> </argument> <description> - Bakes the effect from all [GeometryInstance3D]s marked with [constant GeometryInstance3D.GI_MODE_BAKED] and [Light3D]s marked with either [constant Light3D.BAKE_DYNAMIC] or [constant Light3D.BAKE_STATIC]. If [code]create_visual_debug[/code] is [code]true[/code], after baking the light, this will generate a [MultiMesh] that has a cube representing each solid cell with each cube colored to the cell's albedo color. This can be used to visualize the [GIProbe]'s data and debug any issues that may be occurring. + Bakes the effect from all [GeometryInstance3D]s marked with [constant GeometryInstance3D.GI_MODE_BAKED] and [Light3D]s marked with either [constant Light3D.BAKE_DYNAMIC] or [constant Light3D.BAKE_STATIC]. If [code]create_visual_debug[/code] is [code]true[/code], after baking the light, this will generate a [MultiMesh] that has a cube representing each solid cell with each cube colored to the cell's albedo color. This can be used to visualize the [VoxelGI]'s data and debug any issues that may be occurring. </description> </method> <method name="debug_bake"> @@ -33,14 +33,14 @@ </method> </methods> <members> - <member name="data" type="GIProbeData" setter="set_probe_data" getter="get_probe_data"> - The [GIProbeData] resource that holds the data for this [GIProbe]. + <member name="data" type="VoxelGIData" setter="set_probe_data" getter="get_probe_data"> + The [VoxelGIData] resource that holds the data for this [VoxelGI]. </member> <member name="extents" type="Vector3" setter="set_extents" getter="get_extents" default="Vector3( 10, 10, 10 )"> - The size of the area covered by the [GIProbe]. If you make the extents larger without increasing the subdivisions with [member subdiv], the size of each cell will increase and result in lower detailed lighting. + The size of the area covered by the [VoxelGI]. If you make the extents larger without increasing the subdivisions with [member subdiv], the size of each cell will increase and result in lower detailed lighting. </member> - <member name="subdiv" type="int" setter="set_subdiv" getter="get_subdiv" enum="GIProbe.Subdiv" default="1"> - Number of times to subdivide the grid that the [GIProbe] operates on. A higher number results in finer detail and thus higher visual quality, while lower numbers result in better performance. + <member name="subdiv" type="int" setter="set_subdiv" getter="get_subdiv" enum="VoxelGI.Subdiv" default="1"> + Number of times to subdivide the grid that the [VoxelGI] operates on. A higher number results in finer detail and thus higher visual quality, while lower numbers result in better performance. </member> </members> <constants> diff --git a/doc/classes/GIProbeData.xml b/doc/classes/VoxelGIData.xml index 8549011b19..88a0411e2b 100644 --- a/doc/classes/GIProbeData.xml +++ b/doc/classes/VoxelGIData.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="GIProbeData" inherits="Resource" version="4.0"> +<class name="VoxelGIData" inherits="Resource" version="4.0"> <brief_description> </brief_description> <description> diff --git a/doc/classes/Window.xml b/doc/classes/Window.xml index 37709753bc..9c320747d1 100644 --- a/doc/classes/Window.xml +++ b/doc/classes/Window.xml @@ -340,7 +340,7 @@ </member> <member name="theme" type="Theme" setter="set_theme" getter="get_theme"> </member> - <member name="theme_custom_type" type="StringName" setter="set_theme_custom_type" getter="get_theme_custom_type" default="@"""> + <member name="theme_custom_type" type="StringName" setter="set_theme_custom_type" getter="get_theme_custom_type" default="&"""> </member> <member name="title" type="String" setter="set_title" getter="get_title" default=""""> </member> |