diff options
Diffstat (limited to 'doc')
38 files changed, 107 insertions, 132 deletions
diff --git a/doc/classes/Animation.xml b/doc/classes/Animation.xml index fef65181ae..faa9ae3569 100644 --- a/doc/classes/Animation.xml +++ b/doc/classes/Animation.xml @@ -130,14 +130,6 @@ Sets the stream of the key identified by [param key_idx] to value [param stream]. The [param track_idx] must be the index of an Audio Track. </description> </method> - <method name="bezier_track_get_key_handle_mode" qualifiers="const"> - <return type="int" /> - <param index="0" name="track_idx" type="int" /> - <param index="1" name="key_idx" type="int" /> - <description> - Returns the handle mode of the key identified by [param key_idx]. See [enum HandleMode] for possible values. The [param track_idx] must be the index of a Bezier Track. - </description> - </method> <method name="bezier_track_get_key_in_handle" qualifiers="const"> <return type="Vector2" /> <param index="0" name="track_idx" type="int" /> @@ -169,7 +161,6 @@ <param index="2" name="value" type="float" /> <param index="3" name="in_handle" type="Vector2" default="Vector2(0, 0)" /> <param index="4" name="out_handle" type="Vector2" default="Vector2(0, 0)" /> - <param index="5" name="handle_mode" type="int" enum="Animation.HandleMode" default="1" /> <description> Inserts a Bezier Track key at the given [param time] in seconds. The [param track_idx] must be the index of a Bezier Track. [param in_handle] is the left-side weight of the added Bezier curve point, [param out_handle] is the right-side one, while [param value] is the actual value at this point. @@ -183,16 +174,6 @@ Returns the interpolated value at the given [param time] (in seconds). The [param track_idx] must be the index of a Bezier Track. </description> </method> - <method name="bezier_track_set_key_handle_mode"> - <return type="void" /> - <param index="0" name="track_idx" type="int" /> - <param index="1" name="key_idx" type="int" /> - <param index="2" name="key_handle_mode" type="int" enum="Animation.HandleMode" /> - <param index="3" name="balanced_value_time_ratio" type="float" default="1.0" /> - <description> - Changes the handle mode of the keyframe at the given [param key_idx]. See [enum HandleMode] for possible values. The [param track_idx] must be the index of a Bezier Track. - </description> - </method> <method name="bezier_track_set_key_in_handle"> <return type="void" /> <param index="0" name="track_idx" type="int" /> @@ -643,11 +624,5 @@ <constant name="LOOP_PINGPONG" value="2" enum="LoopMode"> Repeats playback and reverse playback at both ends of the animation. </constant> - <constant name="HANDLE_MODE_FREE" value="0" enum="HandleMode"> - Assigning the free handle mode to a Bezier Track's keyframe allows you to edit the keyframe's left and right handles independently from one another. - </constant> - <constant name="HANDLE_MODE_BALANCED" value="1" enum="HandleMode"> - Assigning the balanced handle mode to a Bezier Track's keyframe makes it so the two handles of the keyframe always stay aligned when changing either the keyframe's left or right handle. - </constant> </constants> </class> diff --git a/doc/classes/AudioEffectDelay.xml b/doc/classes/AudioEffectDelay.xml index 8223ccd6bd..b9ae12204e 100644 --- a/doc/classes/AudioEffectDelay.xml +++ b/doc/classes/AudioEffectDelay.xml @@ -14,40 +14,40 @@ <member name="dry" type="float" setter="set_dry" getter="get_dry" default="1.0"> Output percent of original sound. At 0, only delayed sounds are output. Value can range from 0 to 1. </member> - <member name="feedback/active" type="bool" setter="set_feedback_active" getter="is_feedback_active" default="false"> + <member name="feedback_active" type="bool" setter="set_feedback_active" getter="is_feedback_active" default="false"> If [code]true[/code], feedback is enabled. </member> - <member name="feedback/delay_ms" type="float" setter="set_feedback_delay_ms" getter="get_feedback_delay_ms" default="340.0"> + <member name="feedback_delay_ms" type="float" setter="set_feedback_delay_ms" getter="get_feedback_delay_ms" default="340.0"> Feedback delay time in milliseconds. </member> - <member name="feedback/level_db" type="float" setter="set_feedback_level_db" getter="get_feedback_level_db" default="-6.0"> + <member name="feedback_level_db" type="float" setter="set_feedback_level_db" getter="get_feedback_level_db" default="-6.0"> Sound level for [code]tap1[/code]. </member> - <member name="feedback/lowpass" type="float" setter="set_feedback_lowpass" getter="get_feedback_lowpass" default="16000.0"> + <member name="feedback_lowpass" type="float" setter="set_feedback_lowpass" getter="get_feedback_lowpass" default="16000.0"> Low-pass filter for feedback, in Hz. Frequencies below this value are filtered out of the source signal. </member> - <member name="tap1/active" type="bool" setter="set_tap1_active" getter="is_tap1_active" default="true"> + <member name="tap1_active" type="bool" setter="set_tap1_active" getter="is_tap1_active" default="true"> If [code]true[/code], [code]tap1[/code] will be enabled. </member> - <member name="tap1/delay_ms" type="float" setter="set_tap1_delay_ms" getter="get_tap1_delay_ms" default="250.0"> + <member name="tap1_delay_ms" type="float" setter="set_tap1_delay_ms" getter="get_tap1_delay_ms" default="250.0"> [code]tap1[/code] delay time in milliseconds. </member> - <member name="tap1/level_db" type="float" setter="set_tap1_level_db" getter="get_tap1_level_db" default="-6.0"> + <member name="tap1_level_db" type="float" setter="set_tap1_level_db" getter="get_tap1_level_db" default="-6.0"> Sound level for [code]tap1[/code]. </member> - <member name="tap1/pan" type="float" setter="set_tap1_pan" getter="get_tap1_pan" default="0.2"> + <member name="tap1_pan" type="float" setter="set_tap1_pan" getter="get_tap1_pan" default="0.2"> Pan position for [code]tap1[/code]. Value can range from -1 (fully left) to 1 (fully right). </member> - <member name="tap2/active" type="bool" setter="set_tap2_active" getter="is_tap2_active" default="true"> + <member name="tap2_active" type="bool" setter="set_tap2_active" getter="is_tap2_active" default="true"> If [code]true[/code], [code]tap2[/code] will be enabled. </member> - <member name="tap2/delay_ms" type="float" setter="set_tap2_delay_ms" getter="get_tap2_delay_ms" default="500.0"> + <member name="tap2_delay_ms" type="float" setter="set_tap2_delay_ms" getter="get_tap2_delay_ms" default="500.0"> [b]Tap2[/b] delay time in milliseconds. </member> - <member name="tap2/level_db" type="float" setter="set_tap2_level_db" getter="get_tap2_level_db" default="-12.0"> + <member name="tap2_level_db" type="float" setter="set_tap2_level_db" getter="get_tap2_level_db" default="-12.0"> Sound level for [code]tap2[/code]. </member> - <member name="tap2/pan" type="float" setter="set_tap2_pan" getter="get_tap2_pan" default="-0.4"> + <member name="tap2_pan" type="float" setter="set_tap2_pan" getter="get_tap2_pan" default="-0.4"> Pan position for [code]tap2[/code]. Value can range from -1 (fully left) to 1 (fully right). </member> </members> diff --git a/doc/classes/CharacterBody2D.xml b/doc/classes/CharacterBody2D.xml index 95612de284..b0594b6409 100644 --- a/doc/classes/CharacterBody2D.xml +++ b/doc/classes/CharacterBody2D.xml @@ -140,12 +140,6 @@ </method> </methods> <members> - <member name="collision/safe_margin" type="float" setter="set_safe_margin" getter="get_safe_margin" default="0.08"> - Extra margin used for collision recovery when calling [method move_and_slide]. - If the body is at least this close to another body, it will consider them to be colliding and will be pushed away before performing the actual motion. - A higher value means it's more flexible for detecting collision, which helps with consistently detecting walls and floors. - A lower value forces the collision algorithm to use more exact detection, so it can be used in cases that specifically require precision, e.g at very low scale to avoid visible jittering, or for stability with a stack of character bodies. - </member> <member name="floor_block_on_wall" type="bool" setter="set_floor_block_on_wall_enabled" getter="is_floor_block_on_wall_enabled" default="true"> If [code]true[/code], the body will be able to move on the floor only. This option avoids to be able to walk on walls, it will however allow to slide down along them. </member> @@ -179,6 +173,12 @@ <member name="moving_platform_wall_layers" type="int" setter="set_moving_platform_wall_layers" getter="get_moving_platform_wall_layers" default="0"> Collision layers that will be included for detecting wall bodies that will act as moving platforms to be followed by the [CharacterBody2D]. By default, all wall bodies are ignored. </member> + <member name="safe_margin" type="float" setter="set_safe_margin" getter="get_safe_margin" default="0.08"> + Extra margin used for collision recovery when calling [method move_and_slide]. + If the body is at least this close to another body, it will consider them to be colliding and will be pushed away before performing the actual motion. + A higher value means it's more flexible for detecting collision, which helps with consistently detecting walls and floors. + A lower value forces the collision algorithm to use more exact detection, so it can be used in cases that specifically require precision, e.g at very low scale to avoid visible jittering, or for stability with a stack of character bodies. + </member> <member name="slide_on_ceiling" type="bool" setter="set_slide_on_ceiling_enabled" getter="is_slide_on_ceiling_enabled" default="true"> If [code]true[/code], during a jump against the ceiling, the body will slide, if [code]false[/code] it will be stopped and will fall vertically. </member> diff --git a/doc/classes/CharacterBody3D.xml b/doc/classes/CharacterBody3D.xml index deb93253ea..7efdeb19b1 100644 --- a/doc/classes/CharacterBody3D.xml +++ b/doc/classes/CharacterBody3D.xml @@ -125,12 +125,6 @@ </method> </methods> <members> - <member name="collision/safe_margin" type="float" setter="set_safe_margin" getter="get_safe_margin" default="0.001"> - Extra margin used for collision recovery when calling [method move_and_slide]. - If the body is at least this close to another body, it will consider them to be colliding and will be pushed away before performing the actual motion. - A higher value means it's more flexible for detecting collision, which helps with consistently detecting walls and floors. - A lower value forces the collision algorithm to use more exact detection, so it can be used in cases that specifically require precision, e.g at very low scale to avoid visible jittering, or for stability with a stack of character bodies. - </member> <member name="floor_block_on_wall" type="bool" setter="set_floor_block_on_wall_enabled" getter="is_floor_block_on_wall_enabled" default="true"> If [code]true[/code], the body will be able to move on the floor only. This option avoids to be able to walk on walls, it will however allow to slide down along them. </member> @@ -164,6 +158,12 @@ <member name="moving_platform_wall_layers" type="int" setter="set_moving_platform_wall_layers" getter="get_moving_platform_wall_layers" default="0"> Collision layers that will be included for detecting wall bodies that will act as moving platforms to be followed by the [CharacterBody3D]. By default, all wall bodies are ignored. </member> + <member name="safe_margin" type="float" setter="set_safe_margin" getter="get_safe_margin" default="0.001"> + Extra margin used for collision recovery when calling [method move_and_slide]. + If the body is at least this close to another body, it will consider them to be colliding and will be pushed away before performing the actual motion. + A higher value means it's more flexible for detecting collision, which helps with consistently detecting walls and floors. + A lower value forces the collision algorithm to use more exact detection, so it can be used in cases that specifically require precision, e.g at very low scale to avoid visible jittering, or for stability with a stack of character bodies. + </member> <member name="slide_on_ceiling" type="bool" setter="set_slide_on_ceiling_enabled" getter="is_slide_on_ceiling_enabled" default="true"> If [code]true[/code], during a jump against the ceiling, the body will slide, if [code]false[/code] it will be stopped and will fall vertically. </member> diff --git a/doc/classes/ConeTwistJoint3D.xml b/doc/classes/ConeTwistJoint3D.xml index 5f2ad109f2..1cfe9d197d 100644 --- a/doc/classes/ConeTwistJoint3D.xml +++ b/doc/classes/ConeTwistJoint3D.xml @@ -36,13 +36,13 @@ <member name="softness" type="float" setter="set_param" getter="get_param" default="0.8"> The ease with which the joint starts to twist. If it's too low, it takes more force to start twisting the joint. </member> - <member name="swing_span" type="float" setter="_set_swing_span" getter="_get_swing_span" default="45.0"> + <member name="swing_span" type="float" setter="set_param" getter="get_param" default="0.785398"> Swing is rotation from side to side, around the axis perpendicular to the twist axis. The swing span defines, how much rotation will not get corrected along the swing axis. Could be defined as looseness in the [ConeTwistJoint3D]. If below 0.05, this behavior is locked. </member> - <member name="twist_span" type="float" setter="_set_twist_span" getter="_get_twist_span" default="180.0"> + <member name="twist_span" type="float" setter="set_param" getter="get_param" default="3.14159"> Twist is the rotation around the twist axis, this value defined how far the joint can twist. Twist is locked if below 0.05. </member> diff --git a/doc/classes/EditorResourcePicker.xml b/doc/classes/EditorResourcePicker.xml index c88a7b75b0..4182ab3c16 100644 --- a/doc/classes/EditorResourcePicker.xml +++ b/doc/classes/EditorResourcePicker.xml @@ -62,9 +62,9 @@ </signal> <signal name="resource_selected"> <param index="0" name="resource" type="Resource" /> - <param index="1" name="edit" type="bool" /> + <param index="1" name="inspect" type="bool" /> <description> - Emitted when the resource value was set and user clicked to edit it. When [param edit] is [code]true[/code], the signal was caused by the context menu "Edit" option. + Emitted when the resource value was set and user clicked to edit it. When [param inspect] is [code]true[/code], the signal was caused by the context menu "Edit" or "Inspect" option. </description> </signal> </signals> diff --git a/doc/classes/Generic6DOFJoint3D.xml b/doc/classes/Generic6DOFJoint3D.xml index 5eec089a6f..e6058b1bf9 100644 --- a/doc/classes/Generic6DOFJoint3D.xml +++ b/doc/classes/Generic6DOFJoint3D.xml @@ -102,7 +102,7 @@ <member name="angular_limit_x/force_limit" type="float" setter="set_param_x" getter="get_param_x" default="0.0"> The maximum amount of force that can occur, when rotating around the X axis. </member> - <member name="angular_limit_x/lower_angle" type="float" setter="_set_angular_lo_limit_x" getter="_get_angular_lo_limit_x" default="0.0"> + <member name="angular_limit_x/lower_angle" type="float" setter="set_param_x" getter="get_param_x" default="0.0"> The minimum rotation in negative direction to break loose and rotate around the X axis. </member> <member name="angular_limit_x/restitution" type="float" setter="set_param_x" getter="get_param_x" default="0.0"> @@ -111,7 +111,7 @@ <member name="angular_limit_x/softness" type="float" setter="set_param_x" getter="get_param_x" default="0.5"> The speed of all rotations across the X axis. </member> - <member name="angular_limit_x/upper_angle" type="float" setter="_set_angular_hi_limit_x" getter="_get_angular_hi_limit_x" default="0.0"> + <member name="angular_limit_x/upper_angle" type="float" setter="set_param_x" getter="get_param_x" default="0.0"> The minimum rotation in positive direction to break loose and rotate around the X axis. </member> <member name="angular_limit_y/damping" type="float" setter="set_param_y" getter="get_param_y" default="1.0"> @@ -126,7 +126,7 @@ <member name="angular_limit_y/force_limit" type="float" setter="set_param_y" getter="get_param_y" default="0.0"> The maximum amount of force that can occur, when rotating around the Y axis. </member> - <member name="angular_limit_y/lower_angle" type="float" setter="_set_angular_lo_limit_y" getter="_get_angular_lo_limit_y" default="0.0"> + <member name="angular_limit_y/lower_angle" type="float" setter="set_param_y" getter="get_param_y" default="0.0"> The minimum rotation in negative direction to break loose and rotate around the Y axis. </member> <member name="angular_limit_y/restitution" type="float" setter="set_param_y" getter="get_param_y" default="0.0"> @@ -135,7 +135,7 @@ <member name="angular_limit_y/softness" type="float" setter="set_param_y" getter="get_param_y" default="0.5"> The speed of all rotations across the Y axis. </member> - <member name="angular_limit_y/upper_angle" type="float" setter="_set_angular_hi_limit_y" getter="_get_angular_hi_limit_y" default="0.0"> + <member name="angular_limit_y/upper_angle" type="float" setter="set_param_y" getter="get_param_y" default="0.0"> The minimum rotation in positive direction to break loose and rotate around the Y axis. </member> <member name="angular_limit_z/damping" type="float" setter="set_param_z" getter="get_param_z" default="1.0"> @@ -150,7 +150,7 @@ <member name="angular_limit_z/force_limit" type="float" setter="set_param_z" getter="get_param_z" default="0.0"> The maximum amount of force that can occur, when rotating around the Z axis. </member> - <member name="angular_limit_z/lower_angle" type="float" setter="_set_angular_lo_limit_z" getter="_get_angular_lo_limit_z" default="0.0"> + <member name="angular_limit_z/lower_angle" type="float" setter="set_param_z" getter="get_param_z" default="0.0"> The minimum rotation in negative direction to break loose and rotate around the Z axis. </member> <member name="angular_limit_z/restitution" type="float" setter="set_param_z" getter="get_param_z" default="0.0"> @@ -159,7 +159,7 @@ <member name="angular_limit_z/softness" type="float" setter="set_param_z" getter="get_param_z" default="0.5"> The speed of all rotations across the Z axis. </member> - <member name="angular_limit_z/upper_angle" type="float" setter="_set_angular_hi_limit_z" getter="_get_angular_hi_limit_z" default="0.0"> + <member name="angular_limit_z/upper_angle" type="float" setter="set_param_z" getter="get_param_z" default="0.0"> The minimum rotation in positive direction to break loose and rotate around the Z axis. </member> <member name="angular_motor_x/enabled" type="bool" setter="set_flag_x" getter="get_flag_x" default="false"> diff --git a/doc/classes/Geometry2D.xml b/doc/classes/Geometry2D.xml index 80d19e22c5..392ca2cabb 100644 --- a/doc/classes/Geometry2D.xml +++ b/doc/classes/Geometry2D.xml @@ -10,7 +10,7 @@ </tutorials> <methods> <method name="clip_polygons"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="polygon_a" type="PackedVector2Array" /> <param index="1" name="polygon_b" type="PackedVector2Array" /> <description> @@ -19,7 +19,7 @@ </description> </method> <method name="clip_polyline_with_polygon"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="polyline" type="PackedVector2Array" /> <param index="1" name="polygon" type="PackedVector2Array" /> <description> @@ -34,7 +34,7 @@ </description> </method> <method name="exclude_polygons"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="polygon_a" type="PackedVector2Array" /> <param index="1" name="polygon_b" type="PackedVector2Array" /> <description> @@ -71,7 +71,7 @@ </description> </method> <method name="intersect_polygons"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="polygon_a" type="PackedVector2Array" /> <param index="1" name="polygon_b" type="PackedVector2Array" /> <description> @@ -80,7 +80,7 @@ </description> </method> <method name="intersect_polyline_with_polygon"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="polyline" type="PackedVector2Array" /> <param index="1" name="polygon" type="PackedVector2Array" /> <description> @@ -130,7 +130,7 @@ </description> </method> <method name="merge_polygons"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="polygon_a" type="PackedVector2Array" /> <param index="1" name="polygon_b" type="PackedVector2Array" /> <description> @@ -139,7 +139,7 @@ </description> </method> <method name="offset_polygon"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="polygon" type="PackedVector2Array" /> <param index="1" name="delta" type="float" /> <param index="2" name="join_type" type="int" enum="Geometry2D.PolyJoinType" default="0" /> @@ -166,7 +166,7 @@ </description> </method> <method name="offset_polyline"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="polyline" type="PackedVector2Array" /> <param index="1" name="delta" type="float" /> <param index="2" name="join_type" type="int" enum="Geometry2D.PolyJoinType" default="0" /> diff --git a/doc/classes/Geometry3D.xml b/doc/classes/Geometry3D.xml index c841842d14..d37b0b7b81 100644 --- a/doc/classes/Geometry3D.xml +++ b/doc/classes/Geometry3D.xml @@ -10,14 +10,14 @@ </tutorials> <methods> <method name="build_box_planes"> - <return type="Array" /> + <return type="Plane[]" /> <param index="0" name="extents" type="Vector3" /> <description> Returns an array with 6 [Plane]s that describe the sides of a box centered at the origin. The box size is defined by [param extents], which represents one (positive) corner of the box (i.e. half its actual size). </description> </method> <method name="build_capsule_planes"> - <return type="Array" /> + <return type="Plane[]" /> <param index="0" name="radius" type="float" /> <param index="1" name="height" type="float" /> <param index="2" name="sides" type="int" /> @@ -28,7 +28,7 @@ </description> </method> <method name="build_cylinder_planes"> - <return type="Array" /> + <return type="Plane[]" /> <param index="0" name="radius" type="float" /> <param index="1" name="height" type="float" /> <param index="2" name="sides" type="int" /> diff --git a/doc/classes/GraphEdit.xml b/doc/classes/GraphEdit.xml index 9f9d1a7ed6..e5aa78971e 100644 --- a/doc/classes/GraphEdit.xml +++ b/doc/classes/GraphEdit.xml @@ -149,7 +149,7 @@ </description> </method> <method name="get_connection_list" qualifiers="const"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns an Array containing the list of connections. A connection consists in a structure of the form [code]{ from_port: 0, from: "GraphNode name 0", to_port: 1, to: "GraphNode name 1" }[/code]. </description> diff --git a/doc/classes/HingeJoint3D.xml b/doc/classes/HingeJoint3D.xml index d2547434e7..99524795f9 100644 --- a/doc/classes/HingeJoint3D.xml +++ b/doc/classes/HingeJoint3D.xml @@ -47,7 +47,7 @@ <member name="angular_limit/enable" type="bool" setter="set_flag" getter="get_flag" default="false"> If [code]true[/code], the hinges maximum and minimum rotation, defined by [member angular_limit/lower] and [member angular_limit/upper] has effects. </member> - <member name="angular_limit/lower" type="float" setter="_set_lower_limit" getter="_get_lower_limit" default="-90.0"> + <member name="angular_limit/lower" type="float" setter="set_param" getter="get_param" default="-1.5708"> The minimum rotation. Only active if [member angular_limit/enable] is [code]true[/code]. </member> <member name="angular_limit/relaxation" type="float" setter="set_param" getter="get_param" default="1.0"> @@ -55,7 +55,7 @@ </member> <member name="angular_limit/softness" type="float" setter="set_param" getter="get_param" default="0.9"> </member> - <member name="angular_limit/upper" type="float" setter="_set_upper_limit" getter="_get_upper_limit" default="90.0"> + <member name="angular_limit/upper" type="float" setter="set_param" getter="get_param" default="1.5708"> The maximum rotation. Only active if [member angular_limit/enable] is [code]true[/code]. </member> <member name="motor/enable" type="bool" setter="set_flag" getter="get_flag" default="false"> diff --git a/doc/classes/IP.xml b/doc/classes/IP.xml index e476a86a49..1e5e6da513 100644 --- a/doc/classes/IP.xml +++ b/doc/classes/IP.xml @@ -24,13 +24,13 @@ </description> </method> <method name="get_local_addresses" qualifiers="const"> - <return type="Array" /> + <return type="PackedStringArray" /> <description> Returns all the user's current IPv4 and IPv6 addresses as an array. </description> </method> <method name="get_local_interfaces" qualifiers="const"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns all network adapters as an array. Each adapter is a dictionary of the form: @@ -74,7 +74,7 @@ </description> </method> <method name="resolve_hostname_addresses"> - <return type="Array" /> + <return type="PackedStringArray" /> <param index="0" name="host" type="String" /> <param index="1" name="ip_type" type="int" enum="IP.Type" default="3" /> <description> diff --git a/doc/classes/ImageTexture.xml b/doc/classes/ImageTexture.xml index c750b540a4..45cbd7ac87 100644 --- a/doc/classes/ImageTexture.xml +++ b/doc/classes/ImageTexture.xml @@ -6,20 +6,20 @@ <description> A [Texture2D] based on an [Image]. For an image to be displayed, an [ImageTexture] has to be created from it using the [method create_from_image] method: [codeblock] - var image = Image.load_from_file("res://icon.png") + var image = Image.load_from_file("res://icon.svg") var texture = ImageTexture.create_from_image(image) $Sprite2D.texture = texture [/codeblock] This way, textures can be created at run-time by loading images both from within the editor and externally. [b]Warning:[/b] Prefer to load imported textures with [method @GDScript.load] over loading them from within the filesystem dynamically with [method Image.load], as it may not work in exported projects: [codeblock] - var texture = load("res://icon.png") + var texture = load("res://icon.svg") $Sprite2D.texture = texture [/codeblock] This is because images have to be imported as a [CompressedTexture2D] first to be loaded with [method @GDScript.load]. If you'd still like to load an image file just like any other [Resource], import it as an [Image] resource instead, and then load it normally using the [method @GDScript.load] method. [b]Note:[/b] The image can be retrieved from an imported texture using the [method Texture2D.get_image] method, which returns a copy of the image: [codeblock] - var texture = load("res://icon.png") + var texture = load("res://icon.svg") var image : Image = texture.get_image() [/codeblock] An [ImageTexture] is not meant to be operated from within the editor interface directly, and is mostly useful for rendering images on screen dynamically via code. If you need to generate images procedurally from within the editor, consider saving and importing images as custom texture resources implementing a new [EditorImportPlugin]. diff --git a/doc/classes/InputMap.xml b/doc/classes/InputMap.xml index d60abd7975..1d7d54f681 100644 --- a/doc/classes/InputMap.xml +++ b/doc/classes/InputMap.xml @@ -41,7 +41,7 @@ </description> </method> <method name="action_get_events"> - <return type="Array" /> + <return type="InputEvent[]" /> <param index="0" name="action" type="StringName" /> <description> Returns an array of [InputEvent]s associated with a given action. @@ -91,7 +91,7 @@ </description> </method> <method name="get_actions"> - <return type="Array" /> + <return type="StringName[]" /> <description> Returns an array of all actions in the [InputMap]. </description> diff --git a/doc/classes/Joint3D.xml b/doc/classes/Joint3D.xml index fef8fdf965..a9ca86d269 100644 --- a/doc/classes/Joint3D.xml +++ b/doc/classes/Joint3D.xml @@ -10,16 +10,16 @@ <link title="3D Truck Town Demo">https://godotengine.org/asset-library/asset/524</link> </tutorials> <members> - <member name="collision/exclude_nodes" type="bool" setter="set_exclude_nodes_from_collision" getter="get_exclude_nodes_from_collision" default="true"> + <member name="exclude_nodes_from_collision" type="bool" setter="set_exclude_nodes_from_collision" getter="get_exclude_nodes_from_collision" default="true"> If [code]true[/code], the two bodies of the nodes are not able to collide with each other. </member> - <member name="nodes/node_a" type="NodePath" setter="set_node_a" getter="get_node_a" default="NodePath("")"> + <member name="node_a" type="NodePath" setter="set_node_a" getter="get_node_a" default="NodePath("")"> The node attached to the first side (A) of the joint. </member> - <member name="nodes/node_b" type="NodePath" setter="set_node_b" getter="get_node_b" default="NodePath("")"> + <member name="node_b" type="NodePath" setter="set_node_b" getter="get_node_b" default="NodePath("")"> The node attached to the second side (B) of the joint. </member> - <member name="solver/priority" type="int" setter="set_solver_priority" getter="get_solver_priority" default="1"> + <member name="solver_priority" type="int" setter="set_solver_priority" getter="get_solver_priority" default="1"> The priority used to define which solver is executed first for multiple joints. The lower the value, the higher the priority. </member> </members> diff --git a/doc/classes/Position2D.xml b/doc/classes/Marker2D.xml index 754fd1fdf1..bf90438bf0 100644 --- a/doc/classes/Position2D.xml +++ b/doc/classes/Marker2D.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="Position2D" inherits="Node2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> +<class name="Marker2D" inherits="Node2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> Generic 2D position hint for editing. </brief_description> diff --git a/doc/classes/Position3D.xml b/doc/classes/Marker3D.xml index d91e0fbfdf..5ad1cdf513 100644 --- a/doc/classes/Position3D.xml +++ b/doc/classes/Marker3D.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="Position3D" inherits="Node3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> +<class name="Marker3D" inherits="Node3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> Generic 3D position hint for editing. </brief_description> diff --git a/doc/classes/Mesh.xml b/doc/classes/Mesh.xml index 8e98efa6fc..d3d5a7bfaa 100644 --- a/doc/classes/Mesh.xml +++ b/doc/classes/Mesh.xml @@ -60,7 +60,7 @@ </description> </method> <method name="_surface_get_blend_shape_arrays" qualifiers="virtual const"> - <return type="Array" /> + <return type="Array[]" /> <param index="0" name="index" type="int" /> <description> </description> @@ -153,7 +153,7 @@ </description> </method> <method name="surface_get_blend_shape_arrays" qualifiers="const"> - <return type="Array" /> + <return type="Array[]" /> <param index="0" name="surf_idx" type="int" /> <description> Returns the blend shape arrays for the requested surface. diff --git a/doc/classes/NavigationServer2D.xml b/doc/classes/NavigationServer2D.xml index e4e9a7fea9..2067a237dc 100644 --- a/doc/classes/NavigationServer2D.xml +++ b/doc/classes/NavigationServer2D.xml @@ -128,7 +128,7 @@ </description> </method> <method name="get_maps" qualifiers="const"> - <return type="Array" /> + <return type="RID[]" /> <description> Returns all created navigation map [RID]s on the NavigationServer. This returns both 2D and 3D created navigation maps as there is technically no distinction between them. </description> @@ -150,7 +150,7 @@ </description> </method> <method name="map_get_agents" qualifiers="const"> - <return type="Array" /> + <return type="RID[]" /> <param index="0" name="map" type="RID" /> <description> Returns all navigation agents [RID]s that are currently assigned to the requested navigation [param map]. @@ -198,7 +198,7 @@ </description> </method> <method name="map_get_regions" qualifiers="const"> - <return type="Array" /> + <return type="RID[]" /> <param index="0" name="map" type="RID" /> <description> Returns all navigation regions [RID]s that are currently assigned to the requested navigation [param map]. diff --git a/doc/classes/NavigationServer3D.xml b/doc/classes/NavigationServer3D.xml index 7c6b828aa9..92da5cca21 100644 --- a/doc/classes/NavigationServer3D.xml +++ b/doc/classes/NavigationServer3D.xml @@ -128,7 +128,7 @@ </description> </method> <method name="get_maps" qualifiers="const"> - <return type="Array" /> + <return type="RID[]" /> <description> Returns all created navigation map [RID]s on the NavigationServer. This returns both 2D and 3D created navigation maps as there is technically no distinction between them. </description> @@ -150,7 +150,7 @@ </description> </method> <method name="map_get_agents" qualifiers="const"> - <return type="Array" /> + <return type="RID[]" /> <param index="0" name="map" type="RID" /> <description> Returns all navigation agents [RID]s that are currently assigned to the requested navigation [param map]. @@ -216,7 +216,7 @@ </description> </method> <method name="map_get_regions" qualifiers="const"> - <return type="Array" /> + <return type="RID[]" /> <param index="0" name="map" type="RID" /> <description> Returns all navigation regions [RID]s that are currently assigned to the requested navigation [param map]. diff --git a/doc/classes/Node.xml b/doc/classes/Node.xml index d38a724d39..429a9abf51 100644 --- a/doc/classes/Node.xml +++ b/doc/classes/Node.xml @@ -262,7 +262,7 @@ </description> </method> <method name="get_groups" qualifiers="const"> - <return type="Array" /> + <return type="StringName[]" /> <description> Returns an array listing the groups that the node is a member of. [b]Note:[/b] For performance reasons, the order of node groups is [i]not[/i] guaranteed. The order of node groups should not be relied upon as it can vary across project runs. diff --git a/doc/classes/Node3D.xml b/doc/classes/Node3D.xml index e9f1f995a5..53b93beb40 100644 --- a/doc/classes/Node3D.xml +++ b/doc/classes/Node3D.xml @@ -39,7 +39,7 @@ </description> </method> <method name="get_gizmos" qualifiers="const"> - <return type="Array" /> + <return type="Node3DGizmo[]" /> <description> Returns all the gizmos attached to this [code]Node3D[/code]. </description> diff --git a/doc/classes/Object.xml b/doc/classes/Object.xml index 2e03ac5291..5f9b6f7206 100644 --- a/doc/classes/Object.xml +++ b/doc/classes/Object.xml @@ -43,7 +43,7 @@ </description> </method> <method name="_get_property_list" qualifiers="virtual"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Virtual method which can be overridden to customize the return value of [method get_property_list]. Returns the object's property list as an [Array] of dictionaries. @@ -353,7 +353,7 @@ </description> </method> <method name="get_incoming_connections" qualifiers="const"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns an [Array] of dictionaries with information about signals that are connected to the object. Each [Dictionary] contains three String entries: @@ -394,13 +394,13 @@ </description> </method> <method name="get_method_list" qualifiers="const"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns the object's methods and their signatures as an [Array]. </description> </method> <method name="get_property_list" qualifiers="const"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns the object's property list as an [Array] of dictionaries. Each property's [Dictionary] contain at least [code]name: String[/code] and [code]type: int[/code] (see [enum Variant.Type]) entries. Optionally, it can also include [code]hint: int[/code] (see [enum PropertyHint]), [code]hint_string: String[/code], and [code]usage: int[/code] (see [enum PropertyUsageFlags]). @@ -413,14 +413,14 @@ </description> </method> <method name="get_signal_connection_list" qualifiers="const"> - <return type="Array" /> + <return type="Dictionary[]" /> <param index="0" name="signal" type="StringName" /> <description> Returns an [Array] of connections for the given [param signal]. </description> </method> <method name="get_signal_list" qualifiers="const"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns the list of signals as an [Array] of dictionaries. </description> diff --git a/doc/classes/Performance.xml b/doc/classes/Performance.xml index ddb290f007..92fa1040af 100644 --- a/doc/classes/Performance.xml +++ b/doc/classes/Performance.xml @@ -79,7 +79,7 @@ </description> </method> <method name="get_custom_monitor_names"> - <return type="Array" /> + <return type="StringName[]" /> <description> Returns the names of active custom monitors in an [Array]. </description> diff --git a/doc/classes/PhysicsBody2D.xml b/doc/classes/PhysicsBody2D.xml index 2350fd4458..e8d7ac9920 100644 --- a/doc/classes/PhysicsBody2D.xml +++ b/doc/classes/PhysicsBody2D.xml @@ -32,7 +32,7 @@ Moves the body along the vector [param distance]. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param distance] should be computed using [code]delta[/code]. Returns a [KinematicCollision2D], which contains information about the collision when stopped, or when touching another body along the motion. If [param test_only] is [code]true[/code], the body does not move but the would-be collision information is given. - [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody2D.collision/safe_margin] for more details). + [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody2D.safe_margin] for more details). </description> </method> <method name="remove_collision_exception_with"> @@ -52,7 +52,7 @@ Checks for collisions without moving the body. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param distance] should be computed using [code]delta[/code]. Virtually sets the node's position, scale and rotation to that of the given [Transform2D], then tries to move the body along the vector [param distance]. Returns [code]true[/code] if a collision would stop the body from moving along the whole path. [param collision] is an optional object of type [KinematicCollision2D], which contains additional information about the collision when stopped, or when touching another body along the motion. - [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody2D.collision/safe_margin] for more details). + [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody2D.safe_margin] for more details). </description> </method> </methods> diff --git a/doc/classes/PhysicsBody3D.xml b/doc/classes/PhysicsBody3D.xml index 3ef7fc9030..310671274f 100644 --- a/doc/classes/PhysicsBody3D.xml +++ b/doc/classes/PhysicsBody3D.xml @@ -40,7 +40,7 @@ Moves the body along the vector [param distance]. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param distance] should be computed using [code]delta[/code]. The body will stop if it collides. Returns a [KinematicCollision3D], which contains information about the collision when stopped, or when touching another body along the motion. If [param test_only] is [code]true[/code], the body does not move but the would-be collision information is given. - [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody3D.collision/safe_margin] for more details). + [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody3D.safe_margin] for more details). [param max_collisions] allows to retrieve more than one collision result. </description> </method> @@ -70,7 +70,7 @@ Checks for collisions without moving the body. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param distance] should be computed using [code]delta[/code]. Virtually sets the node's position, scale and rotation to that of the given [Transform3D], then tries to move the body along the vector [param distance]. Returns [code]true[/code] if a collision would stop the body from moving along the whole path. [param collision] is an optional object of type [KinematicCollision3D], which contains additional information about the collision when stopped, or when touching another body along the motion. - [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody3D.collision/safe_margin] for more details). + [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody3D.safe_margin] for more details). [param max_collisions] allows to retrieve more than one collision result. </description> </method> diff --git a/doc/classes/PhysicsDirectSpaceState2D.xml b/doc/classes/PhysicsDirectSpaceState2D.xml index 6290ea315f..d4cb073d15 100644 --- a/doc/classes/PhysicsDirectSpaceState2D.xml +++ b/doc/classes/PhysicsDirectSpaceState2D.xml @@ -12,7 +12,7 @@ </tutorials> <methods> <method name="cast_motion"> - <return type="Array" /> + <return type="PackedFloat32Array" /> <param index="0" name="parameters" type="PhysicsShapeQueryParameters2D" /> <description> Checks how far a [Shape2D] can move without colliding. All the parameters for the query, including the shape and the motion, are supplied through a [PhysicsShapeQueryParameters2D] object. @@ -21,7 +21,7 @@ </description> </method> <method name="collide_shape"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="parameters" type="PhysicsShapeQueryParameters2D" /> <param index="1" name="max_results" type="int" default="32" /> <description> @@ -44,7 +44,7 @@ </description> </method> <method name="intersect_point"> - <return type="Array" /> + <return type="Dictionary[]" /> <param index="0" name="parameters" type="PhysicsPointQueryParameters2D" /> <param index="1" name="max_results" type="int" default="32" /> <description> @@ -72,7 +72,7 @@ </description> </method> <method name="intersect_shape"> - <return type="Array" /> + <return type="Dictionary[]" /> <param index="0" name="parameters" type="PhysicsShapeQueryParameters2D" /> <param index="1" name="max_results" type="int" default="32" /> <description> diff --git a/doc/classes/PhysicsDirectSpaceState3D.xml b/doc/classes/PhysicsDirectSpaceState3D.xml index 619891df90..cc1cf8a323 100644 --- a/doc/classes/PhysicsDirectSpaceState3D.xml +++ b/doc/classes/PhysicsDirectSpaceState3D.xml @@ -12,7 +12,7 @@ </tutorials> <methods> <method name="cast_motion"> - <return type="Array" /> + <return type="PackedFloat32Array" /> <param index="0" name="parameters" type="PhysicsShapeQueryParameters3D" /> <description> Checks how far a [Shape3D] can move without colliding. All the parameters for the query, including the shape, are supplied through a [PhysicsShapeQueryParameters3D] object. @@ -21,7 +21,7 @@ </description> </method> <method name="collide_shape"> - <return type="Array" /> + <return type="PackedVector2Array[]" /> <param index="0" name="parameters" type="PhysicsShapeQueryParameters3D" /> <param index="1" name="max_results" type="int" default="32" /> <description> @@ -46,7 +46,7 @@ </description> </method> <method name="intersect_point"> - <return type="Array" /> + <return type="Dictionary[]" /> <param index="0" name="parameters" type="PhysicsPointQueryParameters3D" /> <param index="1" name="max_results" type="int" default="32" /> <description> @@ -73,7 +73,7 @@ </description> </method> <method name="intersect_shape"> - <return type="Array" /> + <return type="Dictionary[]" /> <param index="0" name="parameters" type="PhysicsShapeQueryParameters3D" /> <param index="1" name="max_results" type="int" default="32" /> <description> diff --git a/doc/classes/RDUniform.xml b/doc/classes/RDUniform.xml index d144024000..e4b7883f02 100644 --- a/doc/classes/RDUniform.xml +++ b/doc/classes/RDUniform.xml @@ -19,7 +19,7 @@ </description> </method> <method name="get_ids" qualifiers="const"> - <return type="Array" /> + <return type="RID[]" /> <description> </description> </method> diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml index 62351ea9ec..15d7fa4d4b 100644 --- a/doc/classes/RenderingServer.xml +++ b/doc/classes/RenderingServer.xml @@ -1959,7 +1959,7 @@ </description> </method> <method name="mesh_surface_get_blend_shape_arrays" qualifiers="const"> - <return type="Array" /> + <return type="Array[]" /> <param index="0" name="mesh" type="RID" /> <param index="1" name="surface" type="int" /> <description> diff --git a/doc/classes/RigidDynamicBody3D.xml b/doc/classes/RigidDynamicBody3D.xml index 83f24be418..7072134250 100644 --- a/doc/classes/RigidDynamicBody3D.xml +++ b/doc/classes/RigidDynamicBody3D.xml @@ -98,7 +98,7 @@ </description> </method> <method name="get_colliding_bodies" qualifiers="const"> - <return type="Array" /> + <return type="Node3D[]" /> <description> Returns a list of the bodies colliding with this one. Requires [member contact_monitor] to be set to [code]true[/code] and [member contacts_reported] to be set high enough to detect all the collisions. [b]Note:[/b] The result of this test is not immediate after moving objects. For performance, list of collisions is updated once per frame and before the physics step. Consider using signals instead. diff --git a/doc/classes/SceneTree.xml b/doc/classes/SceneTree.xml index 0b358bd06f..417703ff01 100644 --- a/doc/classes/SceneTree.xml +++ b/doc/classes/SceneTree.xml @@ -113,14 +113,14 @@ </description> </method> <method name="get_nodes_in_group"> - <return type="Array" /> + <return type="Node[]" /> <param index="0" name="group" type="StringName" /> <description> Returns a list of all nodes assigned to the given group. </description> </method> <method name="get_processed_tweens"> - <return type="Array" /> + <return type="Tween[]" /> <description> Returns an array of currently existing [Tween]s in the [SceneTree] (both running and paused). </description> diff --git a/doc/classes/Script.xml b/doc/classes/Script.xml index 8202f9f536..40ec8ed429 100644 --- a/doc/classes/Script.xml +++ b/doc/classes/Script.xml @@ -44,19 +44,19 @@ </description> </method> <method name="get_script_method_list"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns the list of methods in this [Script]. </description> </method> <method name="get_script_property_list"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns the list of properties in this [Script]. </description> </method> <method name="get_script_signal_list"> - <return type="Array" /> + <return type="Dictionary[]" /> <description> Returns the list of user signals defined in this [Script]. </description> diff --git a/doc/classes/ScriptEditor.xml b/doc/classes/ScriptEditor.xml index 9118f38a3e..becaff975e 100644 --- a/doc/classes/ScriptEditor.xml +++ b/doc/classes/ScriptEditor.xml @@ -22,13 +22,13 @@ </description> </method> <method name="get_open_script_editors" qualifiers="const"> - <return type="Array" /> + <return type="ScriptEditorBase[]" /> <description> Returns an array with all [ScriptEditorBase] objects which are currently open in editor. </description> </method> <method name="get_open_scripts" qualifiers="const"> - <return type="Array" /> + <return type="Script[]" /> <description> Returns an array with all [Script] objects which are currently open in editor. </description> diff --git a/doc/classes/Shape2D.xml b/doc/classes/Shape2D.xml index 4d7031ab86..34ca228795 100644 --- a/doc/classes/Shape2D.xml +++ b/doc/classes/Shape2D.xml @@ -21,7 +21,7 @@ </description> </method> <method name="collide_and_get_contacts"> - <return type="Array" /> + <return type="PackedVector2Array" /> <param index="0" name="local_xform" type="Transform2D" /> <param index="1" name="with_shape" type="Shape2D" /> <param index="2" name="shape_xform" type="Transform2D" /> @@ -45,7 +45,7 @@ </description> </method> <method name="collide_with_motion_and_get_contacts"> - <return type="Array" /> + <return type="PackedVector2Array" /> <param index="0" name="local_xform" type="Transform2D" /> <param index="1" name="local_motion" type="Vector2" /> <param index="2" name="with_shape" type="Shape2D" /> diff --git a/doc/classes/SliderJoint3D.xml b/doc/classes/SliderJoint3D.xml index 7470f89979..a67c38b12d 100644 --- a/doc/classes/SliderJoint3D.xml +++ b/doc/classes/SliderJoint3D.xml @@ -28,7 +28,7 @@ The amount of damping of the rotation when the limit is surpassed. A lower damping value allows a rotation initiated by body A to travel to body B slower. </member> - <member name="angular_limit/lower_angle" type="float" setter="_set_lower_limit_angular" getter="_get_lower_limit_angular" default="0.0"> + <member name="angular_limit/lower_angle" type="float" setter="set_param" getter="get_param" default="0.0"> The lower limit of rotation in the slider. </member> <member name="angular_limit/restitution" type="float" setter="set_param" getter="get_param" default="0.7"> @@ -39,7 +39,7 @@ A factor applied to the all rotation once the limit is surpassed. Makes all rotation slower when between 0 and 1. </member> - <member name="angular_limit/upper_angle" type="float" setter="_set_upper_limit_angular" getter="_get_upper_limit_angular" default="0.0"> + <member name="angular_limit/upper_angle" type="float" setter="set_param" getter="get_param" default="0.0"> The upper limit of rotation in the slider. </member> <member name="angular_motion/damping" type="float" setter="set_param" getter="get_param" default="1.0"> diff --git a/doc/classes/SoftDynamicBody3D.xml b/doc/classes/SoftDynamicBody3D.xml index 87492704d7..7f0a1d94d0 100644 --- a/doc/classes/SoftDynamicBody3D.xml +++ b/doc/classes/SoftDynamicBody3D.xml @@ -19,7 +19,7 @@ </description> </method> <method name="get_collision_exceptions"> - <return type="Array" /> + <return type="PhysicsBody3D[]" /> <description> Returns an array of nodes that were added as collision exceptions for this body. </description> diff --git a/doc/classes/VisualShader.xml b/doc/classes/VisualShader.xml index 558b1086b7..ecfb9000b2 100644 --- a/doc/classes/VisualShader.xml +++ b/doc/classes/VisualShader.xml @@ -81,7 +81,7 @@ </description> </method> <method name="get_node_connections" qualifiers="const"> - <return type="Array" /> + <return type="Dictionary[]" /> <param index="0" name="type" type="int" enum="VisualShader.Type" /> <description> Returns the list of connected nodes with the specified type. |