diff options
Diffstat (limited to 'doc')
36 files changed, 200 insertions, 73 deletions
diff --git a/doc/classes/AStarGrid2D.xml b/doc/classes/AStarGrid2D.xml index bffa395770..cba783246f 100644 --- a/doc/classes/AStarGrid2D.xml +++ b/doc/classes/AStarGrid2D.xml @@ -69,6 +69,20 @@ [b]Note:[/b] This method is not thread-safe. If called from a [Thread], it will return an empty [PackedVector3Array] and will print an error message. </description> </method> + <method name="get_point_position" qualifiers="const"> + <return type="Vector2" /> + <param index="0" name="id" type="Vector2i" /> + <description> + Returns the position of the point associated with the given [param id]. + </description> + </method> + <method name="get_point_weight_scale" qualifiers="const"> + <return type="float" /> + <param index="0" name="id" type="Vector2i" /> + <description> + Returns the weight scale of the point associated with the given [param id]. + </description> + </method> <method name="is_dirty" qualifiers="const"> <return type="bool" /> <description> @@ -106,6 +120,15 @@ [b]Note:[/b] Calling [method update] is not needed after the call of this function. </description> </method> + <method name="set_point_weight_scale"> + <return type="void" /> + <param index="0" name="id" type="Vector2i" /> + <param index="1" name="weight_scale" type="float" /> + <description> + Sets the [param weight_scale] for the point with the given [param id]. The [param weight_scale] is multiplied by the result of [method _compute_cost] when determining the overall cost of traveling across a segment from a neighboring point to this point. + [b]Note:[/b] Calling [method update] is not needed after the call of this function. + </description> + </method> <method name="update"> <return type="void" /> <description> @@ -125,6 +148,7 @@ </member> <member name="jumping_enabled" type="bool" setter="set_jumping_enabled" getter="is_jumping_enabled" default="false"> Enables or disables jumping to skip up the intermediate points and speeds up the searching algorithm. + [b]Note:[/b] Currently, toggling it on disables the consideration of weight scaling in pathfinding. </member> <member name="offset" type="Vector2" setter="set_offset" getter="get_offset" default="Vector2(0, 0)"> The offset of the grid which will be applied to calculate the resulting point position returned by [method get_point_path]. If changed, [method update] needs to be called before finding the next path. diff --git a/doc/classes/Area2D.xml b/doc/classes/Area2D.xml index 29592f133d..3f76cc16ec 100644 --- a/doc/classes/Area2D.xml +++ b/doc/classes/Area2D.xml @@ -114,15 +114,13 @@ <signal name="area_entered"> <param index="0" name="area" type="Area2D" /> <description> - Emitted when another Area2D enters this Area2D. Requires [member monitoring] to be set to [code]true[/code]. - [param area] the other Area2D. + Emitted when the received [param area] enters this area. Requires [member monitoring] to be set to [code]true[/code]. </description> </signal> <signal name="area_exited"> <param index="0" name="area" type="Area2D" /> <description> - Emitted when another Area2D exits this Area2D. Requires [member monitoring] to be set to [code]true[/code]. - [param area] the other Area2D. + Emitted when the received [param area] exits this area. Requires [member monitoring] to be set to [code]true[/code]. </description> </signal> <signal name="area_shape_entered"> @@ -131,11 +129,18 @@ <param index="2" name="area_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of another Area2D's [Shape2D]s enters one of this Area2D's [Shape2D]s. Requires [member monitoring] to be set to [code]true[/code]. - [param area_rid] the [RID] of the other Area2D's [CollisionObject2D] used by the [PhysicsServer2D]. - [param area] the other Area2D. - [param area_shape_index] the index of the [Shape2D] of the other Area2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]area.shape_owner_get_owner(area.shape_find_owner(area_shape_index))[/code]. - [param local_shape_index] the index of the [Shape2D] of this Area2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + Emitted when a [Shape2D] of the received [param area] enters a shape of this area. Requires [member monitoring] to be set to [code]true[/code]. + [param local_shape_index] and [param area_shape_index] contain indices of the interacting shapes from this area and the other area, respectively. [param area_rid] contains the [RID] of the other area. These values can be used with the [PhysicsServer2D]. + [b]Example of getting the[/b] [CollisionShape2D] [b]node from the shape index:[/b] + [codeblocks] + [gdscript] + var other_shape_owner = area.shape_find_owner(area_shape_index) + var other_shape_node = area.shape_owner_get_owner(other_shape_owner) + + var local_shape_owner = shape_find_owner(local_shape_index) + var local_shape_node = shape_owner_get_owner(local_shape_owner) + [/gdscript] + [/codeblocks] </description> </signal> <signal name="area_shape_exited"> @@ -144,25 +149,20 @@ <param index="2" name="area_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of another Area2D's [Shape2D]s exits one of this Area2D's [Shape2D]s. Requires [member monitoring] to be set to [code]true[/code]. - [param area_rid] the [RID] of the other Area2D's [CollisionObject2D] used by the [PhysicsServer2D]. - [param area] the other Area2D. - [param area_shape_index] the index of the [Shape2D] of the other Area2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]area.shape_owner_get_owner(area.shape_find_owner(area_shape_index))[/code]. - [param local_shape_index] the index of the [Shape2D] of this Area2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + Emitted when a [Shape2D] of the received [param area] exits a shape of this area. Requires [member monitoring] to be set to [code]true[/code]. + See also [signal area_shape_entered]. </description> </signal> <signal name="body_entered"> <param index="0" name="body" type="Node2D" /> <description> - Emitted when a [PhysicsBody2D] or [TileMap] enters this Area2D. Requires [member monitoring] to be set to [code]true[/code]. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. - [param body] the [Node], if it exists in the tree, of the other [PhysicsBody2D] or [TileMap]. + Emitted when the received [param body] enters this area. [param body] can be a [PhysicsBody2D] or a [TileMap]. [TileMap]s are detected if their [TileSet] has collision shapes configured. Requires [member monitoring] to be set to [code]true[/code]. </description> </signal> <signal name="body_exited"> <param index="0" name="body" type="Node2D" /> <description> - Emitted when a [PhysicsBody2D] or [TileMap] exits this Area2D. Requires [member monitoring] to be set to [code]true[/code]. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. - [param body] the [Node], if it exists in the tree, of the other [PhysicsBody2D] or [TileMap]. + Emitted when the received [param body] exits this area. [param body] can be a [PhysicsBody2D] or a [TileMap]. [TileMap]s are detected if their [TileSet] has collision shapes configured. Requires [member monitoring] to be set to [code]true[/code]. </description> </signal> <signal name="body_shape_entered"> @@ -171,11 +171,18 @@ <param index="2" name="body_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of a [PhysicsBody2D] or [TileMap]'s [Shape2D]s enters one of this Area2D's [Shape2D]s. Requires [member monitoring] to be set to [code]true[/code]. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. - [param body_rid] the [RID] of the [PhysicsBody2D] or [TileSet]'s [CollisionObject2D] used by the [PhysicsServer2D]. - [param body] the [Node], if it exists in the tree, of the [PhysicsBody2D] or [TileMap]. - [param body_shape_index] the index of the [Shape2D] of the [PhysicsBody2D] or [TileMap] used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]body.shape_owner_get_owner(body.shape_find_owner(body_shape_index))[/code]. - [param local_shape_index] the index of the [Shape2D] of this Area2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + Emitted when a [Shape2D] of the received [param body] enters a shape of this area. [param body] can be a [PhysicsBody2D] or a [TileMap]. [TileMap]s are detected if their [TileSet] has collision shapes configured. Requires [member monitoring] to be set to [code]true[/code]. + [param local_shape_index] and [param body_shape_index] contain indices of the interacting shapes from this area and the interacting body, respectively. [param body_rid] contains the [RID] of the body. These values can be used with the [PhysicsServer2D]. + [b]Example of getting the[/b] [CollisionShape2D] [b]node from the shape index:[/b] + [codeblocks] + [gdscript] + var body_shape_owner = body.shape_find_owner(body_shape_index) + var body_shape_node = body.shape_owner_get_owner(body_shape_owner) + + var local_shape_owner = shape_find_owner(local_shape_index) + var local_shape_node = shape_owner_get_owner(local_shape_owner) + [/gdscript] + [/codeblocks] </description> </signal> <signal name="body_shape_exited"> @@ -184,11 +191,8 @@ <param index="2" name="body_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of a [PhysicsBody2D] or [TileMap]'s [Shape2D]s exits one of this Area2D's [Shape2D]s. Requires [member monitoring] to be set to [code]true[/code]. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. - [param body_rid] the [RID] of the [PhysicsBody2D] or [TileSet]'s [CollisionObject2D] used by the [PhysicsServer2D]. - [param body] the [Node], if it exists in the tree, of the [PhysicsBody2D] or [TileMap]. - [param body_shape_index] the index of the [Shape2D] of the [PhysicsBody2D] or [TileMap] used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]body.shape_owner_get_owner(body.shape_find_owner(body_shape_index))[/code]. - [param local_shape_index] the index of the [Shape2D] of this Area2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + Emitted when a [Shape2D] of the received [param body] exits a shape of this area. [param body] can be a [PhysicsBody2D] or a [TileMap]. [TileMap]s are detected if their [TileSet] has collision shapes configured. Requires [member monitoring] to be set to [code]true[/code]. + See also [signal body_shape_entered]. </description> </signal> </signals> diff --git a/doc/classes/Area3D.xml b/doc/classes/Area3D.xml index ea8cab324d..8923ac8aae 100644 --- a/doc/classes/Area3D.xml +++ b/doc/classes/Area3D.xml @@ -133,15 +133,13 @@ <signal name="area_entered"> <param index="0" name="area" type="Area3D" /> <description> - Emitted when another Area3D enters this Area3D. Requires [member monitoring] to be set to [code]true[/code]. - [param area] the other Area3D. + Emitted when the received [param area] enters this area. Requires [member monitoring] to be set to [code]true[/code]. </description> </signal> <signal name="area_exited"> <param index="0" name="area" type="Area3D" /> <description> - Emitted when another Area3D exits this Area3D. Requires [member monitoring] to be set to [code]true[/code]. - [param area] the other Area3D. + Emitted when the received [param area] exits this area. Requires [member monitoring] to be set to [code]true[/code]. </description> </signal> <signal name="area_shape_entered"> @@ -150,11 +148,18 @@ <param index="2" name="area_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of another Area3D's [Shape3D]s enters one of this Area3D's [Shape3D]s. Requires [member monitoring] to be set to [code]true[/code]. - [param area_rid] the [RID] of the other Area3D's [CollisionObject3D] used by the [PhysicsServer3D]. - [param area] the other Area3D. - [param area_shape_index] the index of the [Shape3D] of the other Area3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]area.shape_owner_get_owner(area.shape_find_owner(area_shape_index))[/code]. - [param local_shape_index] the index of the [Shape3D] of this Area3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + Emitted when a [Shape3D] of the received [param area] enters a shape of this area. Requires [member monitoring] to be set to [code]true[/code]. + [param local_shape_index] and [param area_shape_index] contain indices of the interacting shapes from this area and the other area, respectively. [param area_rid] contains the [RID] of the other area. These values can be used with the [PhysicsServer3D]. + [b]Example of getting the[/b] [CollisionShape3D] [b]node from the shape index:[/b] + [codeblocks] + [gdscript] + var other_shape_owner = area.shape_find_owner(area_shape_index) + var other_shape_node = area.shape_owner_get_owner(other_shape_owner) + + var local_shape_owner = shape_find_owner(local_shape_index) + var local_shape_node = shape_owner_get_owner(local_shape_owner) + [/gdscript] + [/codeblocks] </description> </signal> <signal name="area_shape_exited"> @@ -163,25 +168,20 @@ <param index="2" name="area_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of another Area3D's [Shape3D]s exits one of this Area3D's [Shape3D]s. Requires [member monitoring] to be set to [code]true[/code]. - [param area_rid] the [RID] of the other Area3D's [CollisionObject3D] used by the [PhysicsServer3D]. - [param area] the other Area3D. - [param area_shape_index] the index of the [Shape3D] of the other Area3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]area.shape_owner_get_owner(area.shape_find_owner(area_shape_index))[/code]. - [param local_shape_index] the index of the [Shape3D] of this Area3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + Emitted when a [Shape3D] of the received [param area] exits a shape of this area. Requires [member monitoring] to be set to [code]true[/code]. + See also [signal area_shape_entered]. </description> </signal> <signal name="body_entered"> <param index="0" name="body" type="Node3D" /> <description> - Emitted when a [PhysicsBody3D] or [GridMap] enters this Area3D. Requires [member monitoring] to be set to [code]true[/code]. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. - [param body] the [Node], if it exists in the tree, of the other [PhysicsBody3D] or [GridMap]. + Emitted when the received [param body] enters this area. [param body] can be a [PhysicsBody3D] or a [GridMap]. [GridMap]s are detected if their [MeshLibrary] has collision shapes configured. Requires [member monitoring] to be set to [code]true[/code]. </description> </signal> <signal name="body_exited"> <param index="0" name="body" type="Node3D" /> <description> - Emitted when a [PhysicsBody3D] or [GridMap] exits this Area3D. Requires [member monitoring] to be set to [code]true[/code]. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. - [param body] the [Node], if it exists in the tree, of the other [PhysicsBody3D] or [GridMap]. + Emitted when the received [param body] exits this area. [param body] can be a [PhysicsBody3D] or a [GridMap]. [GridMap]s are detected if their [MeshLibrary] has collision shapes configured. Requires [member monitoring] to be set to [code]true[/code]. </description> </signal> <signal name="body_shape_entered"> @@ -190,11 +190,18 @@ <param index="2" name="body_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of a [PhysicsBody3D] or [GridMap]'s [Shape3D]s enters one of this Area3D's [Shape3D]s. Requires [member monitoring] to be set to [code]true[/code]. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. - [param body_rid] the [RID] of the [PhysicsBody3D] or [MeshLibrary]'s [CollisionObject3D] used by the [PhysicsServer3D]. - [param body] the [Node], if it exists in the tree, of the [PhysicsBody3D] or [GridMap]. - [param body_shape_index] the index of the [Shape3D] of the [PhysicsBody3D] or [GridMap] used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]body.shape_owner_get_owner(body.shape_find_owner(body_shape_index))[/code]. - [param local_shape_index] the index of the [Shape3D] of this Area3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + Emitted when a [Shape3D] of the received [param body] enters a shape of this area. [param body] can be a [PhysicsBody3D] or a [GridMap]. [GridMap]s are detected if their [MeshLibrary] has collision shapes configured. Requires [member monitoring] to be set to [code]true[/code]. + [param local_shape_index] and [param body_shape_index] contain indices of the interacting shapes from this area and the interacting body, respectively. [param body_rid] contains the [RID] of the body. These values can be used with the [PhysicsServer3D]. + [b]Example of getting the[/b] [CollisionShape3D] [b]node from the shape index:[/b] + [codeblocks] + [gdscript] + var body_shape_owner = body.shape_find_owner(body_shape_index) + var body_shape_node = body.shape_owner_get_owner(body_shape_owner) + + var local_shape_owner = shape_find_owner(local_shape_index) + var local_shape_node = shape_owner_get_owner(local_shape_owner) + [/gdscript] + [/codeblocks] </description> </signal> <signal name="body_shape_exited"> @@ -203,11 +210,8 @@ <param index="2" name="body_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of a [PhysicsBody3D] or [GridMap]'s [Shape3D]s enters one of this Area3D's [Shape3D]s. Requires [member monitoring] to be set to [code]true[/code]. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. - [param body_rid] the [RID] of the [PhysicsBody3D] or [MeshLibrary]'s [CollisionObject3D] used by the [PhysicsServer3D]. - [param body] the [Node], if it exists in the tree, of the [PhysicsBody3D] or [GridMap]. - [param body_shape_index] the index of the [Shape3D] of the [PhysicsBody3D] or [GridMap] used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]body.shape_owner_get_owner(body.shape_find_owner(body_shape_index))[/code]. - [param local_shape_index] the index of the [Shape3D] of this Area3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + Emitted when a [Shape3D] of the received [param body] exits a shape of this area. [param body] can be a [PhysicsBody3D] or a [GridMap]. [GridMap]s are detected if their [MeshLibrary] has collision shapes configured. Requires [member monitoring] to be set to [code]true[/code]. + See also [signal body_shape_entered]. </description> </signal> </signals> diff --git a/doc/classes/AudioStreamRandomizer.xml b/doc/classes/AudioStreamRandomizer.xml index 9b58d78af5..d93f853c89 100644 --- a/doc/classes/AudioStreamRandomizer.xml +++ b/doc/classes/AudioStreamRandomizer.xml @@ -12,8 +12,10 @@ <method name="add_stream"> <return type="void" /> <param index="0" name="index" type="int" /> + <param index="1" name="stream" type="AudioStream" /> + <param index="2" name="weight" type="float" default="1.0" /> <description> - Insert a stream at the specified index. + Insert a stream at the specified index. If the index is less than zero, the insertion occurs at the end of the underlying pool. </description> </method> <method name="get_stream" qualifiers="const"> diff --git a/doc/classes/Button.xml b/doc/classes/Button.xml index d2c9a77486..961f3c495a 100644 --- a/doc/classes/Button.xml +++ b/doc/classes/Button.xml @@ -118,6 +118,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> [Font] of the [Button]'s text. diff --git a/doc/classes/CanvasItem.xml b/doc/classes/CanvasItem.xml index 499d53e63c..5171e0acbe 100644 --- a/doc/classes/CanvasItem.xml +++ b/doc/classes/CanvasItem.xml @@ -153,6 +153,7 @@ <param index="3" name="modulate" type="Color" default="Color(1, 1, 1, 1)" /> <param index="4" name="outline" type="float" default="0.0" /> <param index="5" name="pixel_range" type="float" default="4.0" /> + <param index="6" name="scale" type="float" default="1.0" /> <description> Draws a textured rectangle region of the multi-channel signed distance field texture at a given position, optionally modulated by a color. See [member FontFile.multichannel_signed_distance_field] for more information and caveats about MSDF font rendering. If [param outline] is positive, each alpha channel value of pixel in region is set to maximum value of true distance in the [param outline] radius. @@ -404,7 +405,7 @@ <method name="get_canvas_transform" qualifiers="const"> <return type="Transform2D" /> <description> - Returns the transform matrix of this item's canvas. + Returns the transform from the coordinate system of the canvas, this item is in, to the [Viewport]s coordinate system. </description> </method> <method name="get_global_mouse_position" qualifiers="const"> @@ -422,7 +423,7 @@ <method name="get_global_transform_with_canvas" qualifiers="const"> <return type="Transform2D" /> <description> - Returns the global transform matrix of this item in relation to the canvas. + Returns the transform from the local coordinate system of this [CanvasItem] to the [Viewport]s coordinate system. </description> </method> <method name="get_local_mouse_position" qualifiers="const"> @@ -453,7 +454,7 @@ <method name="get_viewport_transform" qualifiers="const"> <return type="Transform2D" /> <description> - Returns this item's transform in relation to the viewport. + Returns the transform from the coordinate system of the canvas, this item is in, to the [Viewport]s embedders coordinate system. </description> </method> <method name="get_visibility_layer_bit" qualifiers="const"> diff --git a/doc/classes/CanvasLayer.xml b/doc/classes/CanvasLayer.xml index 7c1b19b961..ce999c06d3 100644 --- a/doc/classes/CanvasLayer.xml +++ b/doc/classes/CanvasLayer.xml @@ -19,6 +19,12 @@ Returns the RID of the canvas used by this layer. </description> </method> + <method name="get_final_transform" qualifiers="const"> + <return type="Transform2D" /> + <description> + Returns the transform from the [CanvasLayer]s coordinate system to the [Viewport]s coordinate system. + </description> + </method> <method name="hide"> <return type="void" /> <description> diff --git a/doc/classes/CheckBox.xml b/doc/classes/CheckBox.xml index 699e872e99..3ee18cf351 100644 --- a/doc/classes/CheckBox.xml +++ b/doc/classes/CheckBox.xml @@ -43,6 +43,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> The [Font] to use for the [CheckBox] text. diff --git a/doc/classes/CheckButton.xml b/doc/classes/CheckButton.xml index dfbaa7cbee..03578cafd0 100644 --- a/doc/classes/CheckButton.xml +++ b/doc/classes/CheckButton.xml @@ -43,6 +43,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> The [Font] to use for the [CheckButton] text. diff --git a/doc/classes/CodeEdit.xml b/doc/classes/CodeEdit.xml index e7ef5fb289..c313e6c875 100644 --- a/doc/classes/CodeEdit.xml +++ b/doc/classes/CodeEdit.xml @@ -651,6 +651,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> Sets the default [Font]. diff --git a/doc/classes/ColorPickerButton.xml b/doc/classes/ColorPickerButton.xml index b7a0bdfb0c..2a37cc162a 100644 --- a/doc/classes/ColorPickerButton.xml +++ b/doc/classes/ColorPickerButton.xml @@ -79,6 +79,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> [Font] of the [ColorPickerButton]'s text. diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index fd6aab6a49..b0351559ee 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -1050,6 +1050,9 @@ <member name="rotation" type="float" setter="set_rotation" getter="get_rotation" default="0.0"> The node's rotation around its pivot, in radians. See [member pivot_offset] to change the pivot's position. </member> + <member name="rotation_degrees" type="float" setter="set_rotation_degrees" getter="get_rotation_degrees"> + Helper property to access [member rotation] in degrees instead of radians. + </member> <member name="scale" type="Vector2" setter="set_scale" getter="get_scale" default="Vector2(1, 1)"> The node's scale, relative to its [member size]. Change this property to scale the node around its [member pivot_offset]. The Control's [member tooltip_text] will also scale according to this value. [b]Note:[/b] This property is mainly intended to be used for animation purposes. Text inside the Control will look pixelated or blurry when the Control is scaled. To support multiple resolutions in your project, use an appropriate viewport stretch mode as described in the [url=$DOCS_URL/tutorials/rendering/multiple_resolutions.html]documentation[/url] instead of scaling Controls individually. diff --git a/doc/classes/EditorVCSInterface.xml b/doc/classes/EditorVCSInterface.xml index b766978c04..85c10fefd9 100644 --- a/doc/classes/EditorVCSInterface.xml +++ b/doc/classes/EditorVCSInterface.xml @@ -53,7 +53,7 @@ </description> </method> <method name="_get_branch_list" qualifiers="virtual"> - <return type="Dictionary[]" /> + <return type="String[]" /> <description> Gets an instance of an [Array] of [String]s containing available branch names in the VCS. </description> @@ -94,7 +94,7 @@ </description> </method> <method name="_get_remotes" qualifiers="virtual"> - <return type="Dictionary[]" /> + <return type="String[]" /> <description> Returns an [Array] of [String]s, each containing the name of a remote configured in the VCS. </description> diff --git a/doc/classes/FontFile.xml b/doc/classes/FontFile.xml index 1019c271dc..69a7627774 100644 --- a/doc/classes/FontFile.xml +++ b/doc/classes/FontFile.xml @@ -570,7 +570,7 @@ Weight (boldness) of the font. A value in the [code]100...999[/code] range, normal font weight is [code]400[/code], bold font weight is [code]700[/code]. </member> <member name="force_autohinter" type="bool" setter="set_force_autohinter" getter="is_force_autohinter" default="false"> - If set to [code]true[/code], auto-hinting is supported and preferred over font built-in hinting. Used by dynamic fonts only. + If set to [code]true[/code], auto-hinting is supported and preferred over font built-in hinting. Used by dynamic fonts only (MSDF fonts don't support hinting). </member> <member name="generate_mipmaps" type="bool" setter="set_generate_mipmaps" getter="get_generate_mipmaps" default="false"> If set to [code]true[/code], generate mipmaps for the font textures. @@ -579,25 +579,27 @@ Font hinting mode. Used by dynamic fonts only. </member> <member name="msdf_pixel_range" type="int" setter="set_msdf_pixel_range" getter="get_msdf_pixel_range" default="16"> - The width of the range around the shape between the minimum and maximum representable signed distance. + The width of the range around the shape between the minimum and maximum representable signed distance. If using font outlines, [member msdf_pixel_range] must be set to at least [i]twice[/i] the size of the largest font outline. The default [member msdf_pixel_range] value of [code]16[/code] allows outline sizes up to [code]8[/code] to look correct. </member> <member name="msdf_size" type="int" setter="set_msdf_size" getter="get_msdf_size" default="48"> - Source font size used to generate MSDF textures. + Source font size used to generate MSDF textures. Higher values allow for more precision, but are slower to render and require more memory. Only increase this value if you notice a visible lack of precision in glyph rendering. </member> <member name="multichannel_signed_distance_field" type="bool" setter="set_multichannel_signed_distance_field" getter="is_multichannel_signed_distance_field" default="false"> - If set to [code]true[/code], glyphs of all sizes are rendered using single multichannel signed distance field generated from the dynamic font vector data. + If set to [code]true[/code], glyphs of all sizes are rendered using single multichannel signed distance field (MSDF) generated from the dynamic font vector data. Since this approach does not rely on rasterizing the font every time its size changes, this allows for resizing the font in real-time without any performance penalty. Text will also not look grainy for [Control]s that are scaled down (or for [Label3D]s viewed from a long distance). As a downside, font hinting is not available with MSDF. The lack of font hinting may result in less crisp and less readable fonts at small sizes. + [b]Note:[/b] If using font outlines, [member msdf_pixel_range] must be set to at least [i]twice[/i] the size of the largest font outline. + [b]Note:[/b] MSDF font rendering does not render glyphs with overlapping shapes correctly. Overlapping shapes are not valid per the OpenType standard, but are still commonly found in many font files, especially those converted by Google Fonts. To avoid issues with overlapping glyphs, consider downloading the font file directly from the type foundry instead of relying on Google Fonts. </member> <member name="opentype_feature_overrides" type="Dictionary" setter="set_opentype_feature_overrides" getter="get_opentype_feature_overrides" default="{}"> Font OpenType feature set override. </member> <member name="oversampling" type="float" setter="set_oversampling" getter="get_oversampling" default="0.0"> - Font oversampling factor, if set to [code]0.0[/code] global oversampling factor is used instead. Used by dynamic fonts only. + Font oversampling factor. If set to [code]0.0[/code], the global oversampling factor is used instead. Used by dynamic fonts only (MSDF fonts ignore oversampling). </member> <member name="style_name" type="String" setter="set_font_style_name" getter="get_font_style_name" default=""""> Font style name. </member> <member name="subpixel_positioning" type="int" setter="set_subpixel_positioning" getter="get_subpixel_positioning" enum="TextServer.SubpixelPositioning" default="1"> - Font glyph subpixel positioning mode. Subpixel positioning provides shaper text and better kerning for smaller font sizes, at the cost of memory usage and font rasterization speed. Use [constant TextServer.SUBPIXEL_POSITIONING_AUTO] to automatically enable it based on the font size. + Font glyph subpixel positioning mode. Subpixel positioning provides shaper text and better kerning for smaller font sizes, at the cost of higher memory usage and lower font rasterization speed. Use [constant TextServer.SUBPIXEL_POSITIONING_AUTO] to automatically enable it based on the font size. </member> </members> </class> diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml index be66b8a7b9..ed1b40488e 100644 --- a/doc/classes/Image.xml +++ b/doc/classes/Image.xml @@ -76,8 +76,12 @@ <param index="0" name="mode" type="int" enum="Image.CompressMode" /> <param index="1" name="source" type="int" enum="Image.CompressSource" default="0" /> <param index="2" name="lossy_quality" type="float" default="0.7" /> + <param index="3" name="astc_format" type="int" enum="Image.ASTCFormat" default="0" /> <description> - Compresses the image to use less memory. Can not directly access pixel data while the image is compressed. Returns error if the chosen compression mode is not available. See [enum CompressMode] and [enum CompressSource] constants. + Compresses the image to use less memory. Can not directly access pixel data while the image is compressed. Returns error if the chosen compression mode is not available. + The [param mode] parameter helps to pick the best compression method for DXT and ETC2 formats. It is ignored for ASTC compression. + The [param lossy_quality] parameter is optional for compressors that support it. + For ASTC compression, the [param astc_format] parameter must be supplied. </description> </method> <method name="compress_from_channels"> @@ -85,7 +89,12 @@ <param index="0" name="mode" type="int" enum="Image.CompressMode" /> <param index="1" name="channels" type="int" enum="Image.UsedChannels" /> <param index="2" name="lossy_quality" type="float" default="0.7" /> + <param index="3" name="astc_format" type="int" enum="Image.ASTCFormat" default="0" /> <description> + Compresses the image to use less memory. Can not directly access pixel data while the image is compressed. Returns error if the chosen compression mode is not available. + This is an alternative to [method compress] that lets the user supply the channels used in order for the compressor to pick the best DXT and ETC2 formats. For other formats (non DXT or ETC2), this argument is ignored. + The [param lossy_quality] parameter is optional for compressors that support it. + For ASTC compression, the [param astc_format] parameter must be supplied. </description> </method> <method name="compute_image_metrics"> @@ -658,7 +667,19 @@ </constant> <constant name="FORMAT_DXT5_RA_AS_RG" value="34" enum="Format"> </constant> - <constant name="FORMAT_MAX" value="35" enum="Format"> + <constant name="FORMAT_ASTC_4x4" value="35" enum="Format"> + [url=https://en.wikipedia.org/wiki/Adaptive_scalable_texture_compression]Adaptive Scalable Texutre Compression[/url]. This implements the 4x4 (high quality) mode. + </constant> + <constant name="FORMAT_ASTC_4x4_HDR" value="36" enum="Format"> + Same format as [constant FORMAT_ASTC_4x4], but with the hint to let the GPU know it is used for HDR. + </constant> + <constant name="FORMAT_ASTC_8x8" value="37" enum="Format"> + [url=https://en.wikipedia.org/wiki/Adaptive_scalable_texture_compression]Adaptive Scalable Texutre Compression[/url]. This implements the 8x8 (low quality) mode. + </constant> + <constant name="FORMAT_ASTC_8x8_HDR" value="38" enum="Format"> + Same format as [constant FORMAT_ASTC_8x8], but with the hint to let the GPU know it is used for HDR. + </constant> + <constant name="FORMAT_MAX" value="39" enum="Format"> Represents the size of the [enum Format] enum. </constant> <constant name="INTERPOLATE_NEAREST" value="0" enum="Interpolation"> @@ -722,5 +743,11 @@ <constant name="COMPRESS_SOURCE_NORMAL" value="2" enum="CompressSource"> Source texture (before compression) is a normal texture (e.g. it can be compressed into two channels). </constant> + <constant name="ASTC_FORMAT_4x4" value="0" enum="ASTCFormat"> + Hint to indicate that the high quality 4x4 ASTC compression format should be used. + </constant> + <constant name="ASTC_FORMAT_8x8" value="1" enum="ASTCFormat"> + Hint to indicate that the low quality 8x8 ASTC compression format should be used. + </constant> </constants> </class> diff --git a/doc/classes/ItemList.xml b/doc/classes/ItemList.xml index 844f260971..c485d26e0c 100644 --- a/doc/classes/ItemList.xml +++ b/doc/classes/ItemList.xml @@ -459,6 +459,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the item text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="v_separation" data_type="constant" type="int" default="2"> The vertical spacing between items. diff --git a/doc/classes/Label.xml b/doc/classes/Label.xml index cd87b4558f..1a8cbf0584 100644 --- a/doc/classes/Label.xml +++ b/doc/classes/Label.xml @@ -111,6 +111,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> Text outline size. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="shadow_offset_x" data_type="constant" type="int" default="1"> The horizontal offset of the text's shadow. diff --git a/doc/classes/LineEdit.xml b/doc/classes/LineEdit.xml index e57cc68b36..b8383aaed9 100644 --- a/doc/classes/LineEdit.xml +++ b/doc/classes/LineEdit.xml @@ -424,6 +424,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> Font used for the text. diff --git a/doc/classes/LinkButton.xml b/doc/classes/LinkButton.xml index 184ba1ba7a..b3938999f3 100644 --- a/doc/classes/LinkButton.xml +++ b/doc/classes/LinkButton.xml @@ -76,6 +76,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="underline_spacing" data_type="constant" type="int" default="2"> The vertical space between the baseline of text and the underline. diff --git a/doc/classes/MenuBar.xml b/doc/classes/MenuBar.xml index e8505937ff..79876e56a3 100644 --- a/doc/classes/MenuBar.xml +++ b/doc/classes/MenuBar.xml @@ -143,6 +143,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> [Font] of the menu item's text. diff --git a/doc/classes/MenuButton.xml b/doc/classes/MenuButton.xml index 4d5d5a011b..3061149570 100644 --- a/doc/classes/MenuButton.xml +++ b/doc/classes/MenuButton.xml @@ -75,6 +75,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> [Font] of the [MenuButton]'s text. diff --git a/doc/classes/MeshLibrary.xml b/doc/classes/MeshLibrary.xml index ab217abb23..7c93ba5dce 100644 --- a/doc/classes/MeshLibrary.xml +++ b/doc/classes/MeshLibrary.xml @@ -59,6 +59,13 @@ Returns the item's name. </description> </method> + <method name="get_item_navigation_layers" qualifiers="const"> + <return type="int" /> + <param index="0" name="id" type="int" /> + <description> + Returns the item's navigation layers bitmask. + </description> + </method> <method name="get_item_navigation_mesh" qualifiers="const"> <return type="NavigationMesh" /> <param index="0" name="id" type="int" /> @@ -126,6 +133,14 @@ This name is shown in the editor. It can also be used to look up the item later using [method find_item_by_name]. </description> </method> + <method name="set_item_navigation_layers"> + <return type="void" /> + <param index="0" name="id" type="int" /> + <param index="1" name="navigation_layers" type="int" /> + <description> + Sets the item's navigation layers bitmask. + </description> + </method> <method name="set_item_navigation_mesh"> <return type="void" /> <param index="0" name="id" type="int" /> diff --git a/doc/classes/NavigationMesh.xml b/doc/classes/NavigationMesh.xml index 19b3e7d90e..ff898551d4 100644 --- a/doc/classes/NavigationMesh.xml +++ b/doc/classes/NavigationMesh.xml @@ -137,9 +137,6 @@ The name of the group to scan for geometry. Only used when [member geometry_source_geometry_mode] is [constant SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN] or [constant SOURCE_GEOMETRY_GROUPS_EXPLICIT]. </member> - <member name="polygon_vertices_per_polyon" type="float" setter="set_vertices_per_polyon" getter="get_vertices_per_polyon" default="6.0"> - The maximum number of vertices allowed for polygons generated during the contour to polygon conversion process. - </member> <member name="region_merge_size" type="float" setter="set_region_merge_size" getter="get_region_merge_size" default="20.0"> Any regions with a size smaller than this will be merged with larger regions if possible. [b]Note:[/b] This value will be squared to calculate the number of cells. For example, a value of 20 will set the number of cells to 400. @@ -151,6 +148,9 @@ <member name="sample_partition_type" type="int" setter="set_sample_partition_type" getter="get_sample_partition_type" enum="NavigationMesh.SamplePartitionType" default="0"> Partitioning algorithm for creating the navigation mesh polys. See [enum SamplePartitionType] for possible values. </member> + <member name="vertices_per_polygon" type="float" setter="set_vertices_per_polygon" getter="get_vertices_per_polygon" default="6.0"> + The maximum number of vertices allowed for polygons generated during the contour to polygon conversion process. + </member> </members> <constants> <constant name="SAMPLE_PARTITION_WATERSHED" value="0" enum="SamplePartitionType"> diff --git a/doc/classes/Node2D.xml b/doc/classes/Node2D.xml index 26efe37dce..9d224f09b1 100644 --- a/doc/classes/Node2D.xml +++ b/doc/classes/Node2D.xml @@ -99,6 +99,9 @@ <member name="global_rotation" type="float" setter="set_global_rotation" getter="get_global_rotation"> Global rotation in radians. </member> + <member name="global_rotation_degrees" type="float" setter="set_global_rotation_degrees" getter="get_global_rotation_degrees"> + Helper property to access [member global_rotation] in degrees instead of radians. + </member> <member name="global_scale" type="Vector2" setter="set_global_scale" getter="get_global_scale"> Global scale. </member> @@ -114,6 +117,9 @@ <member name="rotation" type="float" setter="set_rotation" getter="get_rotation" default="0.0"> Rotation in radians, relative to the node's parent. </member> + <member name="rotation_degrees" type="float" setter="set_rotation_degrees" getter="get_rotation_degrees"> + Helper property to access [member rotation] in degrees instead of radians. + </member> <member name="scale" type="Vector2" setter="set_scale" getter="get_scale" default="Vector2(1, 1)"> The node's scale. Unscaled value: [code](1, 1)[/code]. [b]Note:[/b] Negative X scales in 2D are not decomposable from the transformation matrix. Due to the way scale is represented with transformation matrices in Godot, negative scales on the X axis will be changed to negative scales on the Y axis and a rotation of 180 degrees when decomposed. diff --git a/doc/classes/Node3D.xml b/doc/classes/Node3D.xml index b6024b1887..1aa71113e9 100644 --- a/doc/classes/Node3D.xml +++ b/doc/classes/Node3D.xml @@ -274,6 +274,9 @@ Rotation part of the global transformation in radians, specified in terms of YXZ-Euler angles in the format (X angle, Y angle, Z angle). [b]Note:[/b] In the mathematical sense, rotation is a matrix and not a vector. The three Euler angles, which are the three independent parameters of the Euler-angle parametrization of the rotation matrix, are stored in a [Vector3] data structure not because the rotation is a vector, but only because [Vector3] exists as a convenient data-structure to store 3 floating-point numbers. Therefore, applying affine operations on the rotation "vector" is not meaningful. </member> + <member name="global_rotation_degrees" type="Vector3" setter="set_global_rotation_degrees" getter="get_global_rotation_degrees"> + Helper property to access [member global_rotation] in degrees instead of radians. + </member> <member name="global_transform" type="Transform3D" setter="set_global_transform" getter="get_global_transform"> World3D space (global) [Transform3D] of this node. </member> @@ -287,6 +290,9 @@ Rotation part of the local transformation in radians, specified in terms of Euler angles. The angles construct a rotaton in the order specified by the [member rotation_order] property. [b]Note:[/b] In the mathematical sense, rotation is a matrix and not a vector. The three Euler angles, which are the three independent parameters of the Euler-angle parametrization of the rotation matrix, are stored in a [Vector3] data structure not because the rotation is a vector, but only because [Vector3] exists as a convenient data-structure to store 3 floating-point numbers. Therefore, applying affine operations on the rotation "vector" is not meaningful. </member> + <member name="rotation_degrees" type="Vector3" setter="set_rotation_degrees" getter="get_rotation_degrees"> + Helper property to access [member rotation] in degrees instead of radians. + </member> <member name="rotation_edit_mode" type="int" setter="set_rotation_edit_mode" getter="get_rotation_edit_mode" enum="Node3D.RotationEditMode" default="0"> Specify how rotation (and scale) will be presented in the editor. </member> diff --git a/doc/classes/OptionButton.xml b/doc/classes/OptionButton.xml index e63e822648..a58a6249ae 100644 --- a/doc/classes/OptionButton.xml +++ b/doc/classes/OptionButton.xml @@ -259,6 +259,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> [Font] of the [OptionButton]'s text. diff --git a/doc/classes/PopupMenu.xml b/doc/classes/PopupMenu.xml index 6810b0e8e4..8dec4eaf86 100644 --- a/doc/classes/PopupMenu.xml +++ b/doc/classes/PopupMenu.xml @@ -584,6 +584,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the item text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="separator_outline_size" data_type="constant" type="int" default="0"> The size of the labeled separator text outline. diff --git a/doc/classes/ProgressBar.xml b/doc/classes/ProgressBar.xml index 510b8d5bd1..9f89a4e4c3 100644 --- a/doc/classes/ProgressBar.xml +++ b/doc/classes/ProgressBar.xml @@ -42,6 +42,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> Font used to draw the fill percentage if [member show_percentage] is [code]true[/code]. diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml index d9b83f2acd..1cc52e6837 100644 --- a/doc/classes/RenderingServer.xml +++ b/doc/classes/RenderingServer.xml @@ -241,6 +241,7 @@ <param index="4" name="modulate" type="Color" default="Color(1, 1, 1, 1)" /> <param index="5" name="outline_size" type="int" default="0" /> <param index="6" name="px_range" type="float" default="1.0" /> + <param index="7" name="scale" type="float" default="1.0" /> <description> </description> </method> diff --git a/doc/classes/RichTextLabel.xml b/doc/classes/RichTextLabel.xml index f587ababfe..e4bc2db104 100644 --- a/doc/classes/RichTextLabel.xml +++ b/doc/classes/RichTextLabel.xml @@ -656,6 +656,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="shadow_offset_x" data_type="constant" type="int" default="1"> The horizontal offset of the font's shadow. diff --git a/doc/classes/TabBar.xml b/doc/classes/TabBar.xml index 713c016651..8d56cbda13 100644 --- a/doc/classes/TabBar.xml +++ b/doc/classes/TabBar.xml @@ -319,6 +319,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the tab text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> The font used to draw tab names. diff --git a/doc/classes/TabContainer.xml b/doc/classes/TabContainer.xml index e2e7a0c37e..c744c9b439 100644 --- a/doc/classes/TabContainer.xml +++ b/doc/classes/TabContainer.xml @@ -214,6 +214,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the tab text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="side_margin" data_type="constant" type="int" default="8"> The space at the left or right edges of the tab bar, accordingly with the current [member tab_alignment]. diff --git a/doc/classes/TextEdit.xml b/doc/classes/TextEdit.xml index d4f5233438..1efd0f9326 100644 --- a/doc/classes/TextEdit.xml +++ b/doc/classes/TextEdit.xml @@ -1396,6 +1396,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="font" data_type="font" type="Font"> Sets the default [Font]. diff --git a/doc/classes/TextServer.xml b/doc/classes/TextServer.xml index 637e502d49..d2c6dee373 100644 --- a/doc/classes/TextServer.xml +++ b/doc/classes/TextServer.xml @@ -930,6 +930,7 @@ <param index="1" name="language" type="String" default="""" /> <description> Converts a number from the Western Arabic (0..9) to the numeral systems used in [param language]. + If [param language] is omitted, the active locale will be used. </description> </method> <method name="free_rid"> diff --git a/doc/classes/Tree.xml b/doc/classes/Tree.xml index 629c271417..584a2a2a7b 100644 --- a/doc/classes/Tree.xml +++ b/doc/classes/Tree.xml @@ -522,6 +522,7 @@ </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the text outline. + [b]Note:[/b] If using a font with [member FontFile.multichannel_signed_distance_field] enabled, its [member FontFile.msdf_pixel_range] must be set to at least [i]twice[/i] the value of [theme_item outline_size] for outline rendering to look correct. Otherwise, the outline may appear to be cut off earlier than intended. </theme_item> <theme_item name="parent_hl_line_margin" data_type="constant" type="int" default="0"> The space between the parent relationship lines for the selected [TreeItem] and the relationship lines to its siblings that are not selected. diff --git a/doc/classes/TubeTrailMesh.xml b/doc/classes/TubeTrailMesh.xml index ddc544dc97..7457aa4050 100644 --- a/doc/classes/TubeTrailMesh.xml +++ b/doc/classes/TubeTrailMesh.xml @@ -7,6 +7,12 @@ <tutorials> </tutorials> <members> + <member name="cap_bottom" type="bool" setter="set_cap_bottom" getter="is_cap_bottom" default="true"> + If [code]true[/code], generates a cap at the bottom of the tube. This can be set to [code]false[/code] to speed up generation and rendering when the cap is never seen by the camera. + </member> + <member name="cap_top" type="bool" setter="set_cap_top" getter="is_cap_top" default="true"> + If [code]true[/code], generates a cap at the top of the tube. This can be set to [code]false[/code] to speed up generation and rendering when the cap is never seen by the camera. + </member> <member name="curve" type="Curve" setter="set_curve" getter="get_curve"> </member> <member name="radial_steps" type="int" setter="set_radial_steps" getter="get_radial_steps" default="8"> |