diff options
Diffstat (limited to 'doc')
243 files changed, 4385 insertions, 2824 deletions
diff --git a/doc/Makefile b/doc/Makefile index 9534da9bd5..d4bc53bcf9 100644 --- a/doc/Makefile +++ b/doc/Makefile @@ -2,6 +2,7 @@ BASEDIR = $(CURDIR) CLASSES = $(BASEDIR)/classes/ $(BASEDIR)/../modules/ OUTPUTDIR = $(BASEDIR)/_build TOOLSDIR = $(BASEDIR)/tools +JSDIR = $(BASEDIR)/../platform/javascript .ONESHELL: @@ -16,6 +17,10 @@ doxygen: rst: rm -rf $(OUTPUTDIR)/rst mkdir -p $(OUTPUTDIR)/rst - pushd $(OUTPUTDIR)/rst - python3 $(TOOLSDIR)/makerst.py $(CLASSES) - popd + python3 $(TOOLSDIR)/makerst.py -o $(OUTPUTDIR)/rst $(CLASSES) + +rstjs: + rm -rf $(OUTPUTDIR)/rstjs + mkdir -p $(OUTPUTDIR)/rstjs + npm --prefix $(JSDIR) ci + npm --prefix $(JSDIR) run docs -- --destination $(OUTPUTDIR)/rstjs/html5_shell_classref.rst diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index bf81362e79..25f8f22d44 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -50,7 +50,7 @@ <argument index="0" name="x" type="float"> </argument> <description> - Returns the arc cosine of [code]x[/code] in radians. Use to get the angle of cosine [code]x[/code]. + Returns the arc cosine of [code]x[/code] in radians. Use to get the angle of cosine [code]x[/code]. [code]x[/code] must be between [code]-1.0[/code] and [code]1.0[/code] (inclusive), otherwise, [method acos] will return [constant @GDScript.NAN]. [codeblock] # c is 0.523599 or 30 degrees if converted with rad2deg(c) c = acos(0.866025) @@ -63,7 +63,7 @@ <argument index="0" name="x" type="float"> </argument> <description> - Returns the arc sine of [code]x[/code] in radians. Use to get the angle of sine [code]x[/code]. + Returns the arc sine of [code]x[/code] in radians. Use to get the angle of sine [code]x[/code]. [code]x[/code] must be between [code]-1.0[/code] and [code]1.0[/code] (inclusive), otherwise, [method asin] will return [constant @GDScript.NAN]. [codeblock] # s is 0.523599 or 30 degrees if converted with rad2deg(s) s = asin(0.5) @@ -777,7 +777,7 @@ <return type="int"> </return> <description> - Returns a random unsigned 32 bit integer. Use remainder to obtain a random value in the interval [code][0, N - 1][/code] (where N is smaller than 2^32). + Returns a random unsigned 32-bit integer. Use remainder to obtain a random value in the interval [code][0, N - 1][/code] (where N is smaller than 2^32). [codeblock] randi() # Returns random integer between 0 and 2^32 - 1 randi() % 20 # Returns random integer between 0 and 19 @@ -935,7 +935,7 @@ <description> Returns the result of smoothly interpolating the value of [code]x[/code] between [code]0[/code] and [code]1[/code], based on the where [code]x[/code] lies with respect to the edges [code]from[/code] and [code]to[/code]. The return value is [code]0[/code] if [code]x <= from[/code], and [code]1[/code] if [code]x >= to[/code]. If [code]x[/code] lies between [code]from[/code] and [code]to[/code], the returned value follows an S-shaped curve that maps [code]x[/code] between [code]0[/code] and [code]1[/code]. - This S-shaped curve is the cubic Hermite interpolator, given by [code]f(x) = 3*x^2 - 2*x^3[/code]. + This S-shaped curve is the cubic Hermite interpolator, given by [code]f(y) = 3*y^2 - 2*y^3[/code] where [code]y = (x-from) / (to-from)[/code]. [codeblock] smoothstep(0, 2, -5.0) # Returns 0.0 smoothstep(0, 2, 0.5) # Returns 0.15625 @@ -1280,6 +1280,10 @@ <constant name="HORIZONTAL" value="0" enum="Orientation"> General horizontal alignment, usually used for [Separator], [ScrollBar], [Slider], etc. </constant> + <constant name="CLOCKWISE" value="0" enum="ClockDirection"> + </constant> + <constant name="COUNTERCLOCKWISE" value="1" enum="ClockDirection"> + </constant> <constant name="HALIGN_LEFT" value="0" enum="HAlign"> Horizontal left alignment, usually for text-derived classes. </constant> @@ -1304,730 +1308,730 @@ <constant name="SPKEY" value="16777216"> Keycodes with this bit applied are non-printable. </constant> - <constant name="KEY_ESCAPE" value="16777217" enum="KeyList"> + <constant name="KEY_ESCAPE" value="16777217" enum="Key"> Escape key. </constant> - <constant name="KEY_TAB" value="16777218" enum="KeyList"> + <constant name="KEY_TAB" value="16777218" enum="Key"> Tab key. </constant> - <constant name="KEY_BACKTAB" value="16777219" enum="KeyList"> + <constant name="KEY_BACKTAB" value="16777219" enum="Key"> Shift + Tab key. </constant> - <constant name="KEY_BACKSPACE" value="16777220" enum="KeyList"> + <constant name="KEY_BACKSPACE" value="16777220" enum="Key"> Backspace key. </constant> - <constant name="KEY_ENTER" value="16777221" enum="KeyList"> + <constant name="KEY_ENTER" value="16777221" enum="Key"> Return key (on the main keyboard). </constant> - <constant name="KEY_KP_ENTER" value="16777222" enum="KeyList"> + <constant name="KEY_KP_ENTER" value="16777222" enum="Key"> Enter key on the numeric keypad. </constant> - <constant name="KEY_INSERT" value="16777223" enum="KeyList"> + <constant name="KEY_INSERT" value="16777223" enum="Key"> Insert key. </constant> - <constant name="KEY_DELETE" value="16777224" enum="KeyList"> + <constant name="KEY_DELETE" value="16777224" enum="Key"> Delete key. </constant> - <constant name="KEY_PAUSE" value="16777225" enum="KeyList"> + <constant name="KEY_PAUSE" value="16777225" enum="Key"> Pause key. </constant> - <constant name="KEY_PRINT" value="16777226" enum="KeyList"> + <constant name="KEY_PRINT" value="16777226" enum="Key"> Print Screen key. </constant> - <constant name="KEY_SYSREQ" value="16777227" enum="KeyList"> + <constant name="KEY_SYSREQ" value="16777227" enum="Key"> System Request key. </constant> - <constant name="KEY_CLEAR" value="16777228" enum="KeyList"> + <constant name="KEY_CLEAR" value="16777228" enum="Key"> Clear key. </constant> - <constant name="KEY_HOME" value="16777229" enum="KeyList"> + <constant name="KEY_HOME" value="16777229" enum="Key"> Home key. </constant> - <constant name="KEY_END" value="16777230" enum="KeyList"> + <constant name="KEY_END" value="16777230" enum="Key"> End key. </constant> - <constant name="KEY_LEFT" value="16777231" enum="KeyList"> + <constant name="KEY_LEFT" value="16777231" enum="Key"> Left arrow key. </constant> - <constant name="KEY_UP" value="16777232" enum="KeyList"> + <constant name="KEY_UP" value="16777232" enum="Key"> Up arrow key. </constant> - <constant name="KEY_RIGHT" value="16777233" enum="KeyList"> + <constant name="KEY_RIGHT" value="16777233" enum="Key"> Right arrow key. </constant> - <constant name="KEY_DOWN" value="16777234" enum="KeyList"> + <constant name="KEY_DOWN" value="16777234" enum="Key"> Down arrow key. </constant> - <constant name="KEY_PAGEUP" value="16777235" enum="KeyList"> + <constant name="KEY_PAGEUP" value="16777235" enum="Key"> Page Up key. </constant> - <constant name="KEY_PAGEDOWN" value="16777236" enum="KeyList"> + <constant name="KEY_PAGEDOWN" value="16777236" enum="Key"> Page Down key. </constant> - <constant name="KEY_SHIFT" value="16777237" enum="KeyList"> + <constant name="KEY_SHIFT" value="16777237" enum="Key"> Shift key. </constant> - <constant name="KEY_CONTROL" value="16777238" enum="KeyList"> + <constant name="KEY_CONTROL" value="16777238" enum="Key"> Control key. </constant> - <constant name="KEY_META" value="16777239" enum="KeyList"> + <constant name="KEY_META" value="16777239" enum="Key"> Meta key. </constant> - <constant name="KEY_ALT" value="16777240" enum="KeyList"> + <constant name="KEY_ALT" value="16777240" enum="Key"> Alt key. </constant> - <constant name="KEY_CAPSLOCK" value="16777241" enum="KeyList"> + <constant name="KEY_CAPSLOCK" value="16777241" enum="Key"> Caps Lock key. </constant> - <constant name="KEY_NUMLOCK" value="16777242" enum="KeyList"> + <constant name="KEY_NUMLOCK" value="16777242" enum="Key"> Num Lock key. </constant> - <constant name="KEY_SCROLLLOCK" value="16777243" enum="KeyList"> + <constant name="KEY_SCROLLLOCK" value="16777243" enum="Key"> Scroll Lock key. </constant> - <constant name="KEY_F1" value="16777244" enum="KeyList"> + <constant name="KEY_F1" value="16777244" enum="Key"> F1 key. </constant> - <constant name="KEY_F2" value="16777245" enum="KeyList"> + <constant name="KEY_F2" value="16777245" enum="Key"> F2 key. </constant> - <constant name="KEY_F3" value="16777246" enum="KeyList"> + <constant name="KEY_F3" value="16777246" enum="Key"> F3 key. </constant> - <constant name="KEY_F4" value="16777247" enum="KeyList"> + <constant name="KEY_F4" value="16777247" enum="Key"> F4 key. </constant> - <constant name="KEY_F5" value="16777248" enum="KeyList"> + <constant name="KEY_F5" value="16777248" enum="Key"> F5 key. </constant> - <constant name="KEY_F6" value="16777249" enum="KeyList"> + <constant name="KEY_F6" value="16777249" enum="Key"> F6 key. </constant> - <constant name="KEY_F7" value="16777250" enum="KeyList"> + <constant name="KEY_F7" value="16777250" enum="Key"> F7 key. </constant> - <constant name="KEY_F8" value="16777251" enum="KeyList"> + <constant name="KEY_F8" value="16777251" enum="Key"> F8 key. </constant> - <constant name="KEY_F9" value="16777252" enum="KeyList"> + <constant name="KEY_F9" value="16777252" enum="Key"> F9 key. </constant> - <constant name="KEY_F10" value="16777253" enum="KeyList"> + <constant name="KEY_F10" value="16777253" enum="Key"> F10 key. </constant> - <constant name="KEY_F11" value="16777254" enum="KeyList"> + <constant name="KEY_F11" value="16777254" enum="Key"> F11 key. </constant> - <constant name="KEY_F12" value="16777255" enum="KeyList"> + <constant name="KEY_F12" value="16777255" enum="Key"> F12 key. </constant> - <constant name="KEY_F13" value="16777256" enum="KeyList"> + <constant name="KEY_F13" value="16777256" enum="Key"> F13 key. </constant> - <constant name="KEY_F14" value="16777257" enum="KeyList"> + <constant name="KEY_F14" value="16777257" enum="Key"> F14 key. </constant> - <constant name="KEY_F15" value="16777258" enum="KeyList"> + <constant name="KEY_F15" value="16777258" enum="Key"> F15 key. </constant> - <constant name="KEY_F16" value="16777259" enum="KeyList"> + <constant name="KEY_F16" value="16777259" enum="Key"> F16 key. </constant> - <constant name="KEY_KP_MULTIPLY" value="16777345" enum="KeyList"> + <constant name="KEY_KP_MULTIPLY" value="16777345" enum="Key"> Multiply (*) key on the numeric keypad. </constant> - <constant name="KEY_KP_DIVIDE" value="16777346" enum="KeyList"> + <constant name="KEY_KP_DIVIDE" value="16777346" enum="Key"> Divide (/) key on the numeric keypad. </constant> - <constant name="KEY_KP_SUBTRACT" value="16777347" enum="KeyList"> + <constant name="KEY_KP_SUBTRACT" value="16777347" enum="Key"> Subtract (-) key on the numeric keypad. </constant> - <constant name="KEY_KP_PERIOD" value="16777348" enum="KeyList"> + <constant name="KEY_KP_PERIOD" value="16777348" enum="Key"> Period (.) key on the numeric keypad. </constant> - <constant name="KEY_KP_ADD" value="16777349" enum="KeyList"> + <constant name="KEY_KP_ADD" value="16777349" enum="Key"> Add (+) key on the numeric keypad. </constant> - <constant name="KEY_KP_0" value="16777350" enum="KeyList"> + <constant name="KEY_KP_0" value="16777350" enum="Key"> Number 0 on the numeric keypad. </constant> - <constant name="KEY_KP_1" value="16777351" enum="KeyList"> + <constant name="KEY_KP_1" value="16777351" enum="Key"> Number 1 on the numeric keypad. </constant> - <constant name="KEY_KP_2" value="16777352" enum="KeyList"> + <constant name="KEY_KP_2" value="16777352" enum="Key"> Number 2 on the numeric keypad. </constant> - <constant name="KEY_KP_3" value="16777353" enum="KeyList"> + <constant name="KEY_KP_3" value="16777353" enum="Key"> Number 3 on the numeric keypad. </constant> - <constant name="KEY_KP_4" value="16777354" enum="KeyList"> + <constant name="KEY_KP_4" value="16777354" enum="Key"> Number 4 on the numeric keypad. </constant> - <constant name="KEY_KP_5" value="16777355" enum="KeyList"> + <constant name="KEY_KP_5" value="16777355" enum="Key"> Number 5 on the numeric keypad. </constant> - <constant name="KEY_KP_6" value="16777356" enum="KeyList"> + <constant name="KEY_KP_6" value="16777356" enum="Key"> Number 6 on the numeric keypad. </constant> - <constant name="KEY_KP_7" value="16777357" enum="KeyList"> + <constant name="KEY_KP_7" value="16777357" enum="Key"> Number 7 on the numeric keypad. </constant> - <constant name="KEY_KP_8" value="16777358" enum="KeyList"> + <constant name="KEY_KP_8" value="16777358" enum="Key"> Number 8 on the numeric keypad. </constant> - <constant name="KEY_KP_9" value="16777359" enum="KeyList"> + <constant name="KEY_KP_9" value="16777359" enum="Key"> Number 9 on the numeric keypad. </constant> - <constant name="KEY_SUPER_L" value="16777260" enum="KeyList"> + <constant name="KEY_SUPER_L" value="16777260" enum="Key"> Left Super key (Windows key). </constant> - <constant name="KEY_SUPER_R" value="16777261" enum="KeyList"> + <constant name="KEY_SUPER_R" value="16777261" enum="Key"> Right Super key (Windows key). </constant> - <constant name="KEY_MENU" value="16777262" enum="KeyList"> + <constant name="KEY_MENU" value="16777262" enum="Key"> Context menu key. </constant> - <constant name="KEY_HYPER_L" value="16777263" enum="KeyList"> + <constant name="KEY_HYPER_L" value="16777263" enum="Key"> Left Hyper key. </constant> - <constant name="KEY_HYPER_R" value="16777264" enum="KeyList"> + <constant name="KEY_HYPER_R" value="16777264" enum="Key"> Right Hyper key. </constant> - <constant name="KEY_HELP" value="16777265" enum="KeyList"> + <constant name="KEY_HELP" value="16777265" enum="Key"> Help key. </constant> - <constant name="KEY_DIRECTION_L" value="16777266" enum="KeyList"> + <constant name="KEY_DIRECTION_L" value="16777266" enum="Key"> Left Direction key. </constant> - <constant name="KEY_DIRECTION_R" value="16777267" enum="KeyList"> + <constant name="KEY_DIRECTION_R" value="16777267" enum="Key"> Right Direction key. </constant> - <constant name="KEY_BACK" value="16777280" enum="KeyList"> + <constant name="KEY_BACK" value="16777280" enum="Key"> Media back key. Not to be confused with the Back button on an Android device. </constant> - <constant name="KEY_FORWARD" value="16777281" enum="KeyList"> + <constant name="KEY_FORWARD" value="16777281" enum="Key"> Media forward key. </constant> - <constant name="KEY_STOP" value="16777282" enum="KeyList"> + <constant name="KEY_STOP" value="16777282" enum="Key"> Media stop key. </constant> - <constant name="KEY_REFRESH" value="16777283" enum="KeyList"> + <constant name="KEY_REFRESH" value="16777283" enum="Key"> Media refresh key. </constant> - <constant name="KEY_VOLUMEDOWN" value="16777284" enum="KeyList"> + <constant name="KEY_VOLUMEDOWN" value="16777284" enum="Key"> Volume down key. </constant> - <constant name="KEY_VOLUMEMUTE" value="16777285" enum="KeyList"> + <constant name="KEY_VOLUMEMUTE" value="16777285" enum="Key"> Mute volume key. </constant> - <constant name="KEY_VOLUMEUP" value="16777286" enum="KeyList"> + <constant name="KEY_VOLUMEUP" value="16777286" enum="Key"> Volume up key. </constant> - <constant name="KEY_BASSBOOST" value="16777287" enum="KeyList"> + <constant name="KEY_BASSBOOST" value="16777287" enum="Key"> Bass Boost key. </constant> - <constant name="KEY_BASSUP" value="16777288" enum="KeyList"> + <constant name="KEY_BASSUP" value="16777288" enum="Key"> Bass up key. </constant> - <constant name="KEY_BASSDOWN" value="16777289" enum="KeyList"> + <constant name="KEY_BASSDOWN" value="16777289" enum="Key"> Bass down key. </constant> - <constant name="KEY_TREBLEUP" value="16777290" enum="KeyList"> + <constant name="KEY_TREBLEUP" value="16777290" enum="Key"> Treble up key. </constant> - <constant name="KEY_TREBLEDOWN" value="16777291" enum="KeyList"> + <constant name="KEY_TREBLEDOWN" value="16777291" enum="Key"> Treble down key. </constant> - <constant name="KEY_MEDIAPLAY" value="16777292" enum="KeyList"> + <constant name="KEY_MEDIAPLAY" value="16777292" enum="Key"> Media play key. </constant> - <constant name="KEY_MEDIASTOP" value="16777293" enum="KeyList"> + <constant name="KEY_MEDIASTOP" value="16777293" enum="Key"> Media stop key. </constant> - <constant name="KEY_MEDIAPREVIOUS" value="16777294" enum="KeyList"> + <constant name="KEY_MEDIAPREVIOUS" value="16777294" enum="Key"> Previous song key. </constant> - <constant name="KEY_MEDIANEXT" value="16777295" enum="KeyList"> + <constant name="KEY_MEDIANEXT" value="16777295" enum="Key"> Next song key. </constant> - <constant name="KEY_MEDIARECORD" value="16777296" enum="KeyList"> + <constant name="KEY_MEDIARECORD" value="16777296" enum="Key"> Media record key. </constant> - <constant name="KEY_HOMEPAGE" value="16777297" enum="KeyList"> + <constant name="KEY_HOMEPAGE" value="16777297" enum="Key"> Home page key. </constant> - <constant name="KEY_FAVORITES" value="16777298" enum="KeyList"> + <constant name="KEY_FAVORITES" value="16777298" enum="Key"> Favorites key. </constant> - <constant name="KEY_SEARCH" value="16777299" enum="KeyList"> + <constant name="KEY_SEARCH" value="16777299" enum="Key"> Search key. </constant> - <constant name="KEY_STANDBY" value="16777300" enum="KeyList"> + <constant name="KEY_STANDBY" value="16777300" enum="Key"> Standby key. </constant> - <constant name="KEY_OPENURL" value="16777301" enum="KeyList"> + <constant name="KEY_OPENURL" value="16777301" enum="Key"> Open URL / Launch Browser key. </constant> - <constant name="KEY_LAUNCHMAIL" value="16777302" enum="KeyList"> + <constant name="KEY_LAUNCHMAIL" value="16777302" enum="Key"> Launch Mail key. </constant> - <constant name="KEY_LAUNCHMEDIA" value="16777303" enum="KeyList"> + <constant name="KEY_LAUNCHMEDIA" value="16777303" enum="Key"> Launch Media key. </constant> - <constant name="KEY_LAUNCH0" value="16777304" enum="KeyList"> + <constant name="KEY_LAUNCH0" value="16777304" enum="Key"> Launch Shortcut 0 key. </constant> - <constant name="KEY_LAUNCH1" value="16777305" enum="KeyList"> + <constant name="KEY_LAUNCH1" value="16777305" enum="Key"> Launch Shortcut 1 key. </constant> - <constant name="KEY_LAUNCH2" value="16777306" enum="KeyList"> + <constant name="KEY_LAUNCH2" value="16777306" enum="Key"> Launch Shortcut 2 key. </constant> - <constant name="KEY_LAUNCH3" value="16777307" enum="KeyList"> + <constant name="KEY_LAUNCH3" value="16777307" enum="Key"> Launch Shortcut 3 key. </constant> - <constant name="KEY_LAUNCH4" value="16777308" enum="KeyList"> + <constant name="KEY_LAUNCH4" value="16777308" enum="Key"> Launch Shortcut 4 key. </constant> - <constant name="KEY_LAUNCH5" value="16777309" enum="KeyList"> + <constant name="KEY_LAUNCH5" value="16777309" enum="Key"> Launch Shortcut 5 key. </constant> - <constant name="KEY_LAUNCH6" value="16777310" enum="KeyList"> + <constant name="KEY_LAUNCH6" value="16777310" enum="Key"> Launch Shortcut 6 key. </constant> - <constant name="KEY_LAUNCH7" value="16777311" enum="KeyList"> + <constant name="KEY_LAUNCH7" value="16777311" enum="Key"> Launch Shortcut 7 key. </constant> - <constant name="KEY_LAUNCH8" value="16777312" enum="KeyList"> + <constant name="KEY_LAUNCH8" value="16777312" enum="Key"> Launch Shortcut 8 key. </constant> - <constant name="KEY_LAUNCH9" value="16777313" enum="KeyList"> + <constant name="KEY_LAUNCH9" value="16777313" enum="Key"> Launch Shortcut 9 key. </constant> - <constant name="KEY_LAUNCHA" value="16777314" enum="KeyList"> + <constant name="KEY_LAUNCHA" value="16777314" enum="Key"> Launch Shortcut A key. </constant> - <constant name="KEY_LAUNCHB" value="16777315" enum="KeyList"> + <constant name="KEY_LAUNCHB" value="16777315" enum="Key"> Launch Shortcut B key. </constant> - <constant name="KEY_LAUNCHC" value="16777316" enum="KeyList"> + <constant name="KEY_LAUNCHC" value="16777316" enum="Key"> Launch Shortcut C key. </constant> - <constant name="KEY_LAUNCHD" value="16777317" enum="KeyList"> + <constant name="KEY_LAUNCHD" value="16777317" enum="Key"> Launch Shortcut D key. </constant> - <constant name="KEY_LAUNCHE" value="16777318" enum="KeyList"> + <constant name="KEY_LAUNCHE" value="16777318" enum="Key"> Launch Shortcut E key. </constant> - <constant name="KEY_LAUNCHF" value="16777319" enum="KeyList"> + <constant name="KEY_LAUNCHF" value="16777319" enum="Key"> Launch Shortcut F key. </constant> - <constant name="KEY_UNKNOWN" value="33554431" enum="KeyList"> + <constant name="KEY_UNKNOWN" value="33554431" enum="Key"> Unknown key. </constant> - <constant name="KEY_SPACE" value="32" enum="KeyList"> + <constant name="KEY_SPACE" value="32" enum="Key"> Space key. </constant> - <constant name="KEY_EXCLAM" value="33" enum="KeyList"> + <constant name="KEY_EXCLAM" value="33" enum="Key"> ! key. </constant> - <constant name="KEY_QUOTEDBL" value="34" enum="KeyList"> + <constant name="KEY_QUOTEDBL" value="34" enum="Key"> " key. </constant> - <constant name="KEY_NUMBERSIGN" value="35" enum="KeyList"> + <constant name="KEY_NUMBERSIGN" value="35" enum="Key"> # key. </constant> - <constant name="KEY_DOLLAR" value="36" enum="KeyList"> + <constant name="KEY_DOLLAR" value="36" enum="Key"> $ key. </constant> - <constant name="KEY_PERCENT" value="37" enum="KeyList"> + <constant name="KEY_PERCENT" value="37" enum="Key"> % key. </constant> - <constant name="KEY_AMPERSAND" value="38" enum="KeyList"> + <constant name="KEY_AMPERSAND" value="38" enum="Key"> & key. </constant> - <constant name="KEY_APOSTROPHE" value="39" enum="KeyList"> + <constant name="KEY_APOSTROPHE" value="39" enum="Key"> ' key. </constant> - <constant name="KEY_PARENLEFT" value="40" enum="KeyList"> + <constant name="KEY_PARENLEFT" value="40" enum="Key"> ( key. </constant> - <constant name="KEY_PARENRIGHT" value="41" enum="KeyList"> + <constant name="KEY_PARENRIGHT" value="41" enum="Key"> ) key. </constant> - <constant name="KEY_ASTERISK" value="42" enum="KeyList"> + <constant name="KEY_ASTERISK" value="42" enum="Key"> * key. </constant> - <constant name="KEY_PLUS" value="43" enum="KeyList"> + <constant name="KEY_PLUS" value="43" enum="Key"> + key. </constant> - <constant name="KEY_COMMA" value="44" enum="KeyList"> + <constant name="KEY_COMMA" value="44" enum="Key"> , key. </constant> - <constant name="KEY_MINUS" value="45" enum="KeyList"> + <constant name="KEY_MINUS" value="45" enum="Key"> - key. </constant> - <constant name="KEY_PERIOD" value="46" enum="KeyList"> + <constant name="KEY_PERIOD" value="46" enum="Key"> . key. </constant> - <constant name="KEY_SLASH" value="47" enum="KeyList"> + <constant name="KEY_SLASH" value="47" enum="Key"> / key. </constant> - <constant name="KEY_0" value="48" enum="KeyList"> + <constant name="KEY_0" value="48" enum="Key"> Number 0. </constant> - <constant name="KEY_1" value="49" enum="KeyList"> + <constant name="KEY_1" value="49" enum="Key"> Number 1. </constant> - <constant name="KEY_2" value="50" enum="KeyList"> + <constant name="KEY_2" value="50" enum="Key"> Number 2. </constant> - <constant name="KEY_3" value="51" enum="KeyList"> + <constant name="KEY_3" value="51" enum="Key"> Number 3. </constant> - <constant name="KEY_4" value="52" enum="KeyList"> + <constant name="KEY_4" value="52" enum="Key"> Number 4. </constant> - <constant name="KEY_5" value="53" enum="KeyList"> + <constant name="KEY_5" value="53" enum="Key"> Number 5. </constant> - <constant name="KEY_6" value="54" enum="KeyList"> + <constant name="KEY_6" value="54" enum="Key"> Number 6. </constant> - <constant name="KEY_7" value="55" enum="KeyList"> + <constant name="KEY_7" value="55" enum="Key"> Number 7. </constant> - <constant name="KEY_8" value="56" enum="KeyList"> + <constant name="KEY_8" value="56" enum="Key"> Number 8. </constant> - <constant name="KEY_9" value="57" enum="KeyList"> + <constant name="KEY_9" value="57" enum="Key"> Number 9. </constant> - <constant name="KEY_COLON" value="58" enum="KeyList"> + <constant name="KEY_COLON" value="58" enum="Key"> : key. </constant> - <constant name="KEY_SEMICOLON" value="59" enum="KeyList"> + <constant name="KEY_SEMICOLON" value="59" enum="Key"> ; key. </constant> - <constant name="KEY_LESS" value="60" enum="KeyList"> + <constant name="KEY_LESS" value="60" enum="Key"> < key. </constant> - <constant name="KEY_EQUAL" value="61" enum="KeyList"> + <constant name="KEY_EQUAL" value="61" enum="Key"> = key. </constant> - <constant name="KEY_GREATER" value="62" enum="KeyList"> + <constant name="KEY_GREATER" value="62" enum="Key"> > key. </constant> - <constant name="KEY_QUESTION" value="63" enum="KeyList"> + <constant name="KEY_QUESTION" value="63" enum="Key"> ? key. </constant> - <constant name="KEY_AT" value="64" enum="KeyList"> + <constant name="KEY_AT" value="64" enum="Key"> @ key. </constant> - <constant name="KEY_A" value="65" enum="KeyList"> + <constant name="KEY_A" value="65" enum="Key"> A key. </constant> - <constant name="KEY_B" value="66" enum="KeyList"> + <constant name="KEY_B" value="66" enum="Key"> B key. </constant> - <constant name="KEY_C" value="67" enum="KeyList"> + <constant name="KEY_C" value="67" enum="Key"> C key. </constant> - <constant name="KEY_D" value="68" enum="KeyList"> + <constant name="KEY_D" value="68" enum="Key"> D key. </constant> - <constant name="KEY_E" value="69" enum="KeyList"> + <constant name="KEY_E" value="69" enum="Key"> E key. </constant> - <constant name="KEY_F" value="70" enum="KeyList"> + <constant name="KEY_F" value="70" enum="Key"> F key. </constant> - <constant name="KEY_G" value="71" enum="KeyList"> + <constant name="KEY_G" value="71" enum="Key"> G key. </constant> - <constant name="KEY_H" value="72" enum="KeyList"> + <constant name="KEY_H" value="72" enum="Key"> H key. </constant> - <constant name="KEY_I" value="73" enum="KeyList"> + <constant name="KEY_I" value="73" enum="Key"> I key. </constant> - <constant name="KEY_J" value="74" enum="KeyList"> + <constant name="KEY_J" value="74" enum="Key"> J key. </constant> - <constant name="KEY_K" value="75" enum="KeyList"> + <constant name="KEY_K" value="75" enum="Key"> K key. </constant> - <constant name="KEY_L" value="76" enum="KeyList"> + <constant name="KEY_L" value="76" enum="Key"> L key. </constant> - <constant name="KEY_M" value="77" enum="KeyList"> + <constant name="KEY_M" value="77" enum="Key"> M key. </constant> - <constant name="KEY_N" value="78" enum="KeyList"> + <constant name="KEY_N" value="78" enum="Key"> N key. </constant> - <constant name="KEY_O" value="79" enum="KeyList"> + <constant name="KEY_O" value="79" enum="Key"> O key. </constant> - <constant name="KEY_P" value="80" enum="KeyList"> + <constant name="KEY_P" value="80" enum="Key"> P key. </constant> - <constant name="KEY_Q" value="81" enum="KeyList"> + <constant name="KEY_Q" value="81" enum="Key"> Q key. </constant> - <constant name="KEY_R" value="82" enum="KeyList"> + <constant name="KEY_R" value="82" enum="Key"> R key. </constant> - <constant name="KEY_S" value="83" enum="KeyList"> + <constant name="KEY_S" value="83" enum="Key"> S key. </constant> - <constant name="KEY_T" value="84" enum="KeyList"> + <constant name="KEY_T" value="84" enum="Key"> T key. </constant> - <constant name="KEY_U" value="85" enum="KeyList"> + <constant name="KEY_U" value="85" enum="Key"> U key. </constant> - <constant name="KEY_V" value="86" enum="KeyList"> + <constant name="KEY_V" value="86" enum="Key"> V key. </constant> - <constant name="KEY_W" value="87" enum="KeyList"> + <constant name="KEY_W" value="87" enum="Key"> W key. </constant> - <constant name="KEY_X" value="88" enum="KeyList"> + <constant name="KEY_X" value="88" enum="Key"> X key. </constant> - <constant name="KEY_Y" value="89" enum="KeyList"> + <constant name="KEY_Y" value="89" enum="Key"> Y key. </constant> - <constant name="KEY_Z" value="90" enum="KeyList"> + <constant name="KEY_Z" value="90" enum="Key"> Z key. </constant> - <constant name="KEY_BRACKETLEFT" value="91" enum="KeyList"> + <constant name="KEY_BRACKETLEFT" value="91" enum="Key"> [ key. </constant> - <constant name="KEY_BACKSLASH" value="92" enum="KeyList"> + <constant name="KEY_BACKSLASH" value="92" enum="Key"> \ key. </constant> - <constant name="KEY_BRACKETRIGHT" value="93" enum="KeyList"> + <constant name="KEY_BRACKETRIGHT" value="93" enum="Key"> ] key. </constant> - <constant name="KEY_ASCIICIRCUM" value="94" enum="KeyList"> + <constant name="KEY_ASCIICIRCUM" value="94" enum="Key"> ^ key. </constant> - <constant name="KEY_UNDERSCORE" value="95" enum="KeyList"> + <constant name="KEY_UNDERSCORE" value="95" enum="Key"> _ key. </constant> - <constant name="KEY_QUOTELEFT" value="96" enum="KeyList"> + <constant name="KEY_QUOTELEFT" value="96" enum="Key"> ` key. </constant> - <constant name="KEY_BRACELEFT" value="123" enum="KeyList"> + <constant name="KEY_BRACELEFT" value="123" enum="Key"> { key. </constant> - <constant name="KEY_BAR" value="124" enum="KeyList"> + <constant name="KEY_BAR" value="124" enum="Key"> | key. </constant> - <constant name="KEY_BRACERIGHT" value="125" enum="KeyList"> + <constant name="KEY_BRACERIGHT" value="125" enum="Key"> } key. </constant> - <constant name="KEY_ASCIITILDE" value="126" enum="KeyList"> + <constant name="KEY_ASCIITILDE" value="126" enum="Key"> ~ key. </constant> - <constant name="KEY_NOBREAKSPACE" value="160" enum="KeyList"> + <constant name="KEY_NOBREAKSPACE" value="160" enum="Key"> Non-breakable space key. </constant> - <constant name="KEY_EXCLAMDOWN" value="161" enum="KeyList"> + <constant name="KEY_EXCLAMDOWN" value="161" enum="Key"> ¡ key. </constant> - <constant name="KEY_CENT" value="162" enum="KeyList"> + <constant name="KEY_CENT" value="162" enum="Key"> ¢ key. </constant> - <constant name="KEY_STERLING" value="163" enum="KeyList"> + <constant name="KEY_STERLING" value="163" enum="Key"> £ key. </constant> - <constant name="KEY_CURRENCY" value="164" enum="KeyList"> + <constant name="KEY_CURRENCY" value="164" enum="Key"> ¤ key. </constant> - <constant name="KEY_YEN" value="165" enum="KeyList"> + <constant name="KEY_YEN" value="165" enum="Key"> ¥ key. </constant> - <constant name="KEY_BROKENBAR" value="166" enum="KeyList"> + <constant name="KEY_BROKENBAR" value="166" enum="Key"> ¦ key. </constant> - <constant name="KEY_SECTION" value="167" enum="KeyList"> + <constant name="KEY_SECTION" value="167" enum="Key"> § key. </constant> - <constant name="KEY_DIAERESIS" value="168" enum="KeyList"> + <constant name="KEY_DIAERESIS" value="168" enum="Key"> ¨ key. </constant> - <constant name="KEY_COPYRIGHT" value="169" enum="KeyList"> + <constant name="KEY_COPYRIGHT" value="169" enum="Key"> © key. </constant> - <constant name="KEY_ORDFEMININE" value="170" enum="KeyList"> + <constant name="KEY_ORDFEMININE" value="170" enum="Key"> ª key. </constant> - <constant name="KEY_GUILLEMOTLEFT" value="171" enum="KeyList"> + <constant name="KEY_GUILLEMOTLEFT" value="171" enum="Key"> « key. </constant> - <constant name="KEY_NOTSIGN" value="172" enum="KeyList"> + <constant name="KEY_NOTSIGN" value="172" enum="Key"> ¬ key. </constant> - <constant name="KEY_HYPHEN" value="173" enum="KeyList"> + <constant name="KEY_HYPHEN" value="173" enum="Key"> Soft hyphen key. </constant> - <constant name="KEY_REGISTERED" value="174" enum="KeyList"> + <constant name="KEY_REGISTERED" value="174" enum="Key"> ® key. </constant> - <constant name="KEY_MACRON" value="175" enum="KeyList"> + <constant name="KEY_MACRON" value="175" enum="Key"> ¯ key. </constant> - <constant name="KEY_DEGREE" value="176" enum="KeyList"> + <constant name="KEY_DEGREE" value="176" enum="Key"> ° key. </constant> - <constant name="KEY_PLUSMINUS" value="177" enum="KeyList"> + <constant name="KEY_PLUSMINUS" value="177" enum="Key"> ± key. </constant> - <constant name="KEY_TWOSUPERIOR" value="178" enum="KeyList"> + <constant name="KEY_TWOSUPERIOR" value="178" enum="Key"> ² key. </constant> - <constant name="KEY_THREESUPERIOR" value="179" enum="KeyList"> + <constant name="KEY_THREESUPERIOR" value="179" enum="Key"> ³ key. </constant> - <constant name="KEY_ACUTE" value="180" enum="KeyList"> + <constant name="KEY_ACUTE" value="180" enum="Key"> ´ key. </constant> - <constant name="KEY_MU" value="181" enum="KeyList"> + <constant name="KEY_MU" value="181" enum="Key"> µ key. </constant> - <constant name="KEY_PARAGRAPH" value="182" enum="KeyList"> + <constant name="KEY_PARAGRAPH" value="182" enum="Key"> ¶ key. </constant> - <constant name="KEY_PERIODCENTERED" value="183" enum="KeyList"> + <constant name="KEY_PERIODCENTERED" value="183" enum="Key"> · key. </constant> - <constant name="KEY_CEDILLA" value="184" enum="KeyList"> + <constant name="KEY_CEDILLA" value="184" enum="Key"> ¸ key. </constant> - <constant name="KEY_ONESUPERIOR" value="185" enum="KeyList"> + <constant name="KEY_ONESUPERIOR" value="185" enum="Key"> ¹ key. </constant> - <constant name="KEY_MASCULINE" value="186" enum="KeyList"> + <constant name="KEY_MASCULINE" value="186" enum="Key"> º key. </constant> - <constant name="KEY_GUILLEMOTRIGHT" value="187" enum="KeyList"> + <constant name="KEY_GUILLEMOTRIGHT" value="187" enum="Key"> » key. </constant> - <constant name="KEY_ONEQUARTER" value="188" enum="KeyList"> + <constant name="KEY_ONEQUARTER" value="188" enum="Key"> ¼ key. </constant> - <constant name="KEY_ONEHALF" value="189" enum="KeyList"> + <constant name="KEY_ONEHALF" value="189" enum="Key"> ½ key. </constant> - <constant name="KEY_THREEQUARTERS" value="190" enum="KeyList"> + <constant name="KEY_THREEQUARTERS" value="190" enum="Key"> ¾ key. </constant> - <constant name="KEY_QUESTIONDOWN" value="191" enum="KeyList"> + <constant name="KEY_QUESTIONDOWN" value="191" enum="Key"> ¿ key. </constant> - <constant name="KEY_AGRAVE" value="192" enum="KeyList"> + <constant name="KEY_AGRAVE" value="192" enum="Key"> À key. </constant> - <constant name="KEY_AACUTE" value="193" enum="KeyList"> + <constant name="KEY_AACUTE" value="193" enum="Key"> Á key. </constant> - <constant name="KEY_ACIRCUMFLEX" value="194" enum="KeyList"> + <constant name="KEY_ACIRCUMFLEX" value="194" enum="Key"> Â key. </constant> - <constant name="KEY_ATILDE" value="195" enum="KeyList"> + <constant name="KEY_ATILDE" value="195" enum="Key"> Ã key. </constant> - <constant name="KEY_ADIAERESIS" value="196" enum="KeyList"> + <constant name="KEY_ADIAERESIS" value="196" enum="Key"> Ä key. </constant> - <constant name="KEY_ARING" value="197" enum="KeyList"> + <constant name="KEY_ARING" value="197" enum="Key"> Å key. </constant> - <constant name="KEY_AE" value="198" enum="KeyList"> + <constant name="KEY_AE" value="198" enum="Key"> Æ key. </constant> - <constant name="KEY_CCEDILLA" value="199" enum="KeyList"> + <constant name="KEY_CCEDILLA" value="199" enum="Key"> Ç key. </constant> - <constant name="KEY_EGRAVE" value="200" enum="KeyList"> + <constant name="KEY_EGRAVE" value="200" enum="Key"> È key. </constant> - <constant name="KEY_EACUTE" value="201" enum="KeyList"> + <constant name="KEY_EACUTE" value="201" enum="Key"> É key. </constant> - <constant name="KEY_ECIRCUMFLEX" value="202" enum="KeyList"> + <constant name="KEY_ECIRCUMFLEX" value="202" enum="Key"> Ê key. </constant> - <constant name="KEY_EDIAERESIS" value="203" enum="KeyList"> + <constant name="KEY_EDIAERESIS" value="203" enum="Key"> Ë key. </constant> - <constant name="KEY_IGRAVE" value="204" enum="KeyList"> + <constant name="KEY_IGRAVE" value="204" enum="Key"> Ì key. </constant> - <constant name="KEY_IACUTE" value="205" enum="KeyList"> + <constant name="KEY_IACUTE" value="205" enum="Key"> Í key. </constant> - <constant name="KEY_ICIRCUMFLEX" value="206" enum="KeyList"> + <constant name="KEY_ICIRCUMFLEX" value="206" enum="Key"> Î key. </constant> - <constant name="KEY_IDIAERESIS" value="207" enum="KeyList"> + <constant name="KEY_IDIAERESIS" value="207" enum="Key"> Ï key. </constant> - <constant name="KEY_ETH" value="208" enum="KeyList"> + <constant name="KEY_ETH" value="208" enum="Key"> Ð key. </constant> - <constant name="KEY_NTILDE" value="209" enum="KeyList"> + <constant name="KEY_NTILDE" value="209" enum="Key"> Ñ key. </constant> - <constant name="KEY_OGRAVE" value="210" enum="KeyList"> + <constant name="KEY_OGRAVE" value="210" enum="Key"> Ò key. </constant> - <constant name="KEY_OACUTE" value="211" enum="KeyList"> + <constant name="KEY_OACUTE" value="211" enum="Key"> Ó key. </constant> - <constant name="KEY_OCIRCUMFLEX" value="212" enum="KeyList"> + <constant name="KEY_OCIRCUMFLEX" value="212" enum="Key"> Ô key. </constant> - <constant name="KEY_OTILDE" value="213" enum="KeyList"> + <constant name="KEY_OTILDE" value="213" enum="Key"> Õ key. </constant> - <constant name="KEY_ODIAERESIS" value="214" enum="KeyList"> + <constant name="KEY_ODIAERESIS" value="214" enum="Key"> Ö key. </constant> - <constant name="KEY_MULTIPLY" value="215" enum="KeyList"> + <constant name="KEY_MULTIPLY" value="215" enum="Key"> × key. </constant> - <constant name="KEY_OOBLIQUE" value="216" enum="KeyList"> + <constant name="KEY_OOBLIQUE" value="216" enum="Key"> Ø key. </constant> - <constant name="KEY_UGRAVE" value="217" enum="KeyList"> + <constant name="KEY_UGRAVE" value="217" enum="Key"> Ù key. </constant> - <constant name="KEY_UACUTE" value="218" enum="KeyList"> + <constant name="KEY_UACUTE" value="218" enum="Key"> Ú key. </constant> - <constant name="KEY_UCIRCUMFLEX" value="219" enum="KeyList"> + <constant name="KEY_UCIRCUMFLEX" value="219" enum="Key"> Û key. </constant> - <constant name="KEY_UDIAERESIS" value="220" enum="KeyList"> + <constant name="KEY_UDIAERESIS" value="220" enum="Key"> Ü key. </constant> - <constant name="KEY_YACUTE" value="221" enum="KeyList"> + <constant name="KEY_YACUTE" value="221" enum="Key"> Ý key. </constant> - <constant name="KEY_THORN" value="222" enum="KeyList"> + <constant name="KEY_THORN" value="222" enum="Key"> Þ key. </constant> - <constant name="KEY_SSHARP" value="223" enum="KeyList"> + <constant name="KEY_SSHARP" value="223" enum="Key"> ß key. </constant> - <constant name="KEY_DIVISION" value="247" enum="KeyList"> + <constant name="KEY_DIVISION" value="247" enum="Key"> ÷ key. </constant> - <constant name="KEY_YDIAERESIS" value="255" enum="KeyList"> + <constant name="KEY_YDIAERESIS" value="255" enum="Key"> ÿ key. </constant> <constant name="KEY_CODE_MASK" value="33554431" enum="KeyModifierMask"> @@ -2057,148 +2061,166 @@ <constant name="KEY_MASK_GROUP_SWITCH" value="1073741824" enum="KeyModifierMask"> Group Switch key mask. </constant> - <constant name="BUTTON_LEFT" value="1" enum="ButtonList"> + <constant name="MOUSE_BUTTON_LEFT" value="1" enum="MouseButton"> Left mouse button. </constant> - <constant name="BUTTON_RIGHT" value="2" enum="ButtonList"> + <constant name="MOUSE_BUTTON_RIGHT" value="2" enum="MouseButton"> Right mouse button. </constant> - <constant name="BUTTON_MIDDLE" value="3" enum="ButtonList"> + <constant name="MOUSE_BUTTON_MIDDLE" value="3" enum="MouseButton"> Middle mouse button. </constant> - <constant name="BUTTON_XBUTTON1" value="8" enum="ButtonList"> + <constant name="MOUSE_BUTTON_XBUTTON1" value="8" enum="MouseButton"> Extra mouse button 1 (only present on some mice). </constant> - <constant name="BUTTON_XBUTTON2" value="9" enum="ButtonList"> + <constant name="MOUSE_BUTTON_XBUTTON2" value="9" enum="MouseButton"> Extra mouse button 2 (only present on some mice). </constant> - <constant name="BUTTON_WHEEL_UP" value="4" enum="ButtonList"> + <constant name="MOUSE_BUTTON_WHEEL_UP" value="4" enum="MouseButton"> Mouse wheel up. </constant> - <constant name="BUTTON_WHEEL_DOWN" value="5" enum="ButtonList"> + <constant name="MOUSE_BUTTON_WHEEL_DOWN" value="5" enum="MouseButton"> Mouse wheel down. </constant> - <constant name="BUTTON_WHEEL_LEFT" value="6" enum="ButtonList"> + <constant name="MOUSE_BUTTON_WHEEL_LEFT" value="6" enum="MouseButton"> Mouse wheel left button (only present on some mice). </constant> - <constant name="BUTTON_WHEEL_RIGHT" value="7" enum="ButtonList"> + <constant name="MOUSE_BUTTON_WHEEL_RIGHT" value="7" enum="MouseButton"> Mouse wheel right button (only present on some mice). </constant> - <constant name="BUTTON_MASK_LEFT" value="1" enum="ButtonList"> + <constant name="MOUSE_BUTTON_MASK_LEFT" value="1" enum="MouseButton"> Left mouse button mask. </constant> - <constant name="BUTTON_MASK_RIGHT" value="2" enum="ButtonList"> + <constant name="MOUSE_BUTTON_MASK_RIGHT" value="2" enum="MouseButton"> Right mouse button mask. </constant> - <constant name="BUTTON_MASK_MIDDLE" value="4" enum="ButtonList"> + <constant name="MOUSE_BUTTON_MASK_MIDDLE" value="4" enum="MouseButton"> Middle mouse button mask. </constant> - <constant name="BUTTON_MASK_XBUTTON1" value="128" enum="ButtonList"> + <constant name="MOUSE_BUTTON_MASK_XBUTTON1" value="128" enum="MouseButton"> Extra mouse button 1 mask. </constant> - <constant name="BUTTON_MASK_XBUTTON2" value="256" enum="ButtonList"> + <constant name="MOUSE_BUTTON_MASK_XBUTTON2" value="256" enum="MouseButton"> Extra mouse button 2 mask. </constant> - <constant name="JOY_BUTTON_INVALID" value="-1" enum="JoyButtonList"> + <constant name="JOY_BUTTON_INVALID" value="-1" enum="JoyButton"> An invalid game controller button. </constant> - <constant name="JOY_BUTTON_A" value="0" enum="JoyButtonList"> + <constant name="JOY_BUTTON_A" value="0" enum="JoyButton"> Game controller SDL button A. Corresponds to the bottom action button: Sony Cross, Xbox A, Nintendo B. </constant> - <constant name="JOY_BUTTON_B" value="1" enum="JoyButtonList"> + <constant name="JOY_BUTTON_B" value="1" enum="JoyButton"> Game controller SDL button B. Corresponds to the right action button: Sony Circle, Xbox B, Nintendo A. </constant> - <constant name="JOY_BUTTON_X" value="2" enum="JoyButtonList"> + <constant name="JOY_BUTTON_X" value="2" enum="JoyButton"> Game controller SDL button X. Corresponds to the left action button: Sony Square, Xbox X, Nintendo Y. </constant> - <constant name="JOY_BUTTON_Y" value="3" enum="JoyButtonList"> + <constant name="JOY_BUTTON_Y" value="3" enum="JoyButton"> Game controller SDL button Y. Corresponds to the top action button: Sony Triangle, Xbox Y, Nintendo X. </constant> - <constant name="JOY_BUTTON_BACK" value="4" enum="JoyButtonList"> + <constant name="JOY_BUTTON_BACK" value="4" enum="JoyButton"> Game controller SDL back button. Corresponds to the Sony Select, Xbox Back, Nintendo - button. </constant> - <constant name="JOY_BUTTON_GUIDE" value="5" enum="JoyButtonList"> + <constant name="JOY_BUTTON_GUIDE" value="5" enum="JoyButton"> Game controller SDL guide button. Corresponds to the Sony PS, Xbox Home button. </constant> - <constant name="JOY_BUTTON_START" value="6" enum="JoyButtonList"> + <constant name="JOY_BUTTON_START" value="6" enum="JoyButton"> Game controller SDL start button. Corresponds to the Nintendo + button. </constant> - <constant name="JOY_BUTTON_LEFT_STICK" value="7" enum="JoyButtonList"> + <constant name="JOY_BUTTON_LEFT_STICK" value="7" enum="JoyButton"> Game controller SDL left stick button. Corresponds to the Sony L3, Xbox L/LS button. </constant> - <constant name="JOY_BUTTON_RIGHT_STICK" value="8" enum="JoyButtonList"> + <constant name="JOY_BUTTON_RIGHT_STICK" value="8" enum="JoyButton"> Game controller SDL right stick button. Corresponds to the Sony R3, Xbox R/RS button. </constant> - <constant name="JOY_BUTTON_LEFT_SHOULDER" value="9" enum="JoyButtonList"> + <constant name="JOY_BUTTON_LEFT_SHOULDER" value="9" enum="JoyButton"> Game controller SDL left shoulder button. Corresponds to the Sony L1, Xbox LB button. </constant> - <constant name="JOY_BUTTON_RIGHT_SHOULDER" value="10" enum="JoyButtonList"> + <constant name="JOY_BUTTON_RIGHT_SHOULDER" value="10" enum="JoyButton"> Game controller SDL right shoulder button. Corresponds to the Sony R1, Xbox RB button. </constant> - <constant name="JOY_BUTTON_DPAD_UP" value="11" enum="JoyButtonList"> + <constant name="JOY_BUTTON_DPAD_UP" value="11" enum="JoyButton"> Game controller D-pad up button. </constant> - <constant name="JOY_BUTTON_DPAD_DOWN" value="12" enum="JoyButtonList"> + <constant name="JOY_BUTTON_DPAD_DOWN" value="12" enum="JoyButton"> Game controller D-pad down button. </constant> - <constant name="JOY_BUTTON_DPAD_LEFT" value="13" enum="JoyButtonList"> + <constant name="JOY_BUTTON_DPAD_LEFT" value="13" enum="JoyButton"> Game controller D-pad left button. </constant> - <constant name="JOY_BUTTON_DPAD_RIGHT" value="14" enum="JoyButtonList"> + <constant name="JOY_BUTTON_DPAD_RIGHT" value="14" enum="JoyButton"> Game controller D-pad right button. </constant> - <constant name="JOY_BUTTON_SDL_MAX" value="15" enum="JoyButtonList"> + <constant name="JOY_BUTTON_MISC1" value="15" enum="JoyButton"> + Game controller SDL miscellaneous button. Corresponds to Xbox share button, PS5 microphone button, Nintendo capture button. + </constant> + <constant name="JOY_BUTTON_PADDLE1" value="16" enum="JoyButton"> + Game controller SDL paddle 1 button. + </constant> + <constant name="JOY_BUTTON_PADDLE2" value="17" enum="JoyButton"> + Game controller SDL paddle 2 button. + </constant> + <constant name="JOY_BUTTON_PADDLE3" value="18" enum="JoyButton"> + Game controller SDL paddle 3 button. + </constant> + <constant name="JOY_BUTTON_PADDLE4" value="19" enum="JoyButton"> + Game controller SDL paddle 4 button. + </constant> + <constant name="JOY_BUTTON_TOUCHPAD" value="20" enum="JoyButton"> + Game controller SDL touchpad button. + </constant> + <constant name="JOY_BUTTON_SDL_MAX" value="21" enum="JoyButton"> The number of SDL game controller buttons. </constant> - <constant name="JOY_BUTTON_MAX" value="36" enum="JoyButtonList"> + <constant name="JOY_BUTTON_MAX" value="36" enum="JoyButton"> The maximum number of game controller buttons: Android supports up to 36 buttons. </constant> - <constant name="JOY_AXIS_INVALID" value="-1" enum="JoyAxisList"> + <constant name="JOY_AXIS_INVALID" value="-1" enum="JoyAxis"> An invalid game controller axis. </constant> - <constant name="JOY_AXIS_LEFT_X" value="0" enum="JoyAxisList"> + <constant name="JOY_AXIS_LEFT_X" value="0" enum="JoyAxis"> Game controller left joystick x-axis. </constant> - <constant name="JOY_AXIS_LEFT_Y" value="1" enum="JoyAxisList"> + <constant name="JOY_AXIS_LEFT_Y" value="1" enum="JoyAxis"> Game controller left joystick y-axis. </constant> - <constant name="JOY_AXIS_RIGHT_X" value="2" enum="JoyAxisList"> + <constant name="JOY_AXIS_RIGHT_X" value="2" enum="JoyAxis"> Game controller right joystick x-axis. </constant> - <constant name="JOY_AXIS_RIGHT_Y" value="3" enum="JoyAxisList"> + <constant name="JOY_AXIS_RIGHT_Y" value="3" enum="JoyAxis"> Game controller right joystick y-axis. </constant> - <constant name="JOY_AXIS_TRIGGER_LEFT" value="4" enum="JoyAxisList"> + <constant name="JOY_AXIS_TRIGGER_LEFT" value="4" enum="JoyAxis"> Game controller left trigger axis. </constant> - <constant name="JOY_AXIS_TRIGGER_RIGHT" value="5" enum="JoyAxisList"> + <constant name="JOY_AXIS_TRIGGER_RIGHT" value="5" enum="JoyAxis"> Game controller right trigger axis. </constant> - <constant name="JOY_AXIS_SDL_MAX" value="6" enum="JoyAxisList"> + <constant name="JOY_AXIS_SDL_MAX" value="6" enum="JoyAxis"> The number of SDL game controller axes. </constant> - <constant name="JOY_AXIS_MAX" value="10" enum="JoyAxisList"> + <constant name="JOY_AXIS_MAX" value="10" enum="JoyAxis"> The maximum number of game controller axes: OpenVR supports up to 5 Joysticks making a total of 10 axes. </constant> - <constant name="MIDI_MESSAGE_NOTE_OFF" value="8" enum="MidiMessageList"> + <constant name="MIDI_MESSAGE_NOTE_OFF" value="8" enum="MIDIMessage"> MIDI note OFF message. </constant> - <constant name="MIDI_MESSAGE_NOTE_ON" value="9" enum="MidiMessageList"> + <constant name="MIDI_MESSAGE_NOTE_ON" value="9" enum="MIDIMessage"> MIDI note ON message. </constant> - <constant name="MIDI_MESSAGE_AFTERTOUCH" value="10" enum="MidiMessageList"> + <constant name="MIDI_MESSAGE_AFTERTOUCH" value="10" enum="MIDIMessage"> MIDI aftertouch message. </constant> - <constant name="MIDI_MESSAGE_CONTROL_CHANGE" value="11" enum="MidiMessageList"> + <constant name="MIDI_MESSAGE_CONTROL_CHANGE" value="11" enum="MIDIMessage"> MIDI control change message. </constant> - <constant name="MIDI_MESSAGE_PROGRAM_CHANGE" value="12" enum="MidiMessageList"> + <constant name="MIDI_MESSAGE_PROGRAM_CHANGE" value="12" enum="MIDIMessage"> MIDI program change message. </constant> - <constant name="MIDI_MESSAGE_CHANNEL_PRESSURE" value="13" enum="MidiMessageList"> + <constant name="MIDI_MESSAGE_CHANNEL_PRESSURE" value="13" enum="MIDIMessage"> MIDI channel pressure message. </constant> - <constant name="MIDI_MESSAGE_PITCH_BEND" value="14" enum="MidiMessageList"> + <constant name="MIDI_MESSAGE_PITCH_BEND" value="14" enum="MIDIMessage"> MIDI pitch bend message. </constant> <constant name="OK" value="0" enum="Error"> @@ -2387,43 +2409,49 @@ <constant name="PROPERTY_HINT_LAYERS_2D_PHYSICS" value="9" enum="PropertyHint"> Hints that an integer property is a bitmask using the optionally named 2D physics layers. </constant> - <constant name="PROPERTY_HINT_LAYERS_3D_RENDER" value="10" enum="PropertyHint"> + <constant name="PROPERTY_HINT_LAYERS_2D_NAVIGATION" value="10" enum="PropertyHint"> + Hints that an integer property is a bitmask using the optionally named 2D navigation layers. + </constant> + <constant name="PROPERTY_HINT_LAYERS_3D_RENDER" value="11" enum="PropertyHint"> Hints that an integer property is a bitmask using the optionally named 3D render layers. </constant> - <constant name="PROPERTY_HINT_LAYERS_3D_PHYSICS" value="11" enum="PropertyHint"> + <constant name="PROPERTY_HINT_LAYERS_3D_PHYSICS" value="12" enum="PropertyHint"> Hints that an integer property is a bitmask using the optionally named 3D physics layers. </constant> - <constant name="PROPERTY_HINT_FILE" value="12" enum="PropertyHint"> + <constant name="PROPERTY_HINT_LAYERS_3D_NAVIGATION" value="13" enum="PropertyHint"> + Hints that an integer property is a bitmask using the optionally named 2D navigation layers. + </constant> + <constant name="PROPERTY_HINT_FILE" value="14" enum="PropertyHint"> Hints that a string property is a path to a file. Editing it will show a file dialog for picking the path. The hint string can be a set of filters with wildcards like [code]"*.png,*.jpg"[/code]. </constant> - <constant name="PROPERTY_HINT_DIR" value="13" enum="PropertyHint"> + <constant name="PROPERTY_HINT_DIR" value="15" enum="PropertyHint"> Hints that a string property is a path to a directory. Editing it will show a file dialog for picking the path. </constant> - <constant name="PROPERTY_HINT_GLOBAL_FILE" value="14" enum="PropertyHint"> + <constant name="PROPERTY_HINT_GLOBAL_FILE" value="16" enum="PropertyHint"> Hints that a string property is an absolute path to a file outside the project folder. Editing it will show a file dialog for picking the path. The hint string can be a set of filters with wildcards like [code]"*.png,*.jpg"[/code]. </constant> - <constant name="PROPERTY_HINT_GLOBAL_DIR" value="15" enum="PropertyHint"> + <constant name="PROPERTY_HINT_GLOBAL_DIR" value="17" enum="PropertyHint"> Hints that a string property is an absolute path to a directory outside the project folder. Editing it will show a file dialog for picking the path. </constant> - <constant name="PROPERTY_HINT_RESOURCE_TYPE" value="16" enum="PropertyHint"> + <constant name="PROPERTY_HINT_RESOURCE_TYPE" value="18" enum="PropertyHint"> Hints that a property is an instance of a [Resource]-derived type, optionally specified via the hint string (e.g. [code]"Texture2D"[/code]). Editing it will show a popup menu of valid resource types to instantiate. </constant> - <constant name="PROPERTY_HINT_MULTILINE_TEXT" value="17" enum="PropertyHint"> + <constant name="PROPERTY_HINT_MULTILINE_TEXT" value="19" enum="PropertyHint"> Hints that a string property is text with line breaks. Editing it will show a text input field where line breaks can be typed. </constant> - <constant name="PROPERTY_HINT_PLACEHOLDER_TEXT" value="18" enum="PropertyHint"> + <constant name="PROPERTY_HINT_PLACEHOLDER_TEXT" value="20" enum="PropertyHint"> Hints that a string property should have a placeholder text visible on its input field, whenever the property is empty. The hint string is the placeholder text to use. </constant> - <constant name="PROPERTY_HINT_COLOR_NO_ALPHA" value="19" enum="PropertyHint"> + <constant name="PROPERTY_HINT_COLOR_NO_ALPHA" value="21" enum="PropertyHint"> Hints that a color property should be edited without changing its alpha component, i.e. only R, G and B channels are edited. </constant> - <constant name="PROPERTY_HINT_IMAGE_COMPRESS_LOSSY" value="20" enum="PropertyHint"> + <constant name="PROPERTY_HINT_IMAGE_COMPRESS_LOSSY" value="22" enum="PropertyHint"> Hints that an image is compressed using lossy compression. </constant> - <constant name="PROPERTY_HINT_IMAGE_COMPRESS_LOSSLESS" value="21" enum="PropertyHint"> + <constant name="PROPERTY_HINT_IMAGE_COMPRESS_LOSSLESS" value="23" enum="PropertyHint"> Hints that an image is compressed using lossless compression. </constant> - <constant name="PROPERTY_HINT_TYPE_STRING" value="23" enum="PropertyHint"> + <constant name="PROPERTY_HINT_TYPE_STRING" value="25" enum="PropertyHint"> Hint that a property represents a particular type. If a property is [constant TYPE_STRING], allows to set a type from the create dialog. If you need to create an [Array] to contain elements of a specific type, the [code]hint_string[/code] must encode nested types using [code]":"[/code] and [code]"/"[/code] for specifying [Resource] types. For instance: [codeblock] hint_string = "%s:" % [TYPE_INT] # Array of inteters. @@ -2502,6 +2530,8 @@ <constant name="METHOD_FLAG_FROM_SCRIPT" value="64" enum="MethodFlags"> Deprecated method flag, unused. </constant> + <constant name="METHOD_FLAG_STATIC" value="256" enum="MethodFlags"> + </constant> <constant name="METHOD_FLAGS_DEFAULT" value="1" enum="MethodFlags"> Default method flags. </constant> diff --git a/doc/classes/AABB.xml b/doc/classes/AABB.xml index 8cd7e6f5fa..a28bde9946 100644 --- a/doc/classes/AABB.xml +++ b/doc/classes/AABB.xml @@ -41,14 +41,14 @@ Constructs an [AABB] from a position and size. </description> </method> - <method name="abs"> + <method name="abs" qualifiers="const"> <return type="AABB"> </return> <description> Returns an AABB with equivalent position and size, modified so that the most-negative corner is the origin and the size is positive. </description> </method> - <method name="encloses"> + <method name="encloses" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="with" type="AABB"> @@ -57,7 +57,7 @@ Returns [code]true[/code] if this [AABB] completely encloses another one. </description> </method> - <method name="expand"> + <method name="expand" qualifiers="const"> <return type="AABB"> </return> <argument index="0" name="to_point" type="Vector3"> @@ -66,14 +66,14 @@ Returns this [AABB] expanded to include a given point. </description> </method> - <method name="get_area"> + <method name="get_area" qualifiers="const"> <return type="float"> </return> <description> Returns the volume of the [AABB]. </description> </method> - <method name="get_endpoint"> + <method name="get_endpoint" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="idx" type="int"> @@ -82,49 +82,49 @@ Gets the position of the 8 endpoints of the [AABB] in space. </description> </method> - <method name="get_longest_axis"> + <method name="get_longest_axis" qualifiers="const"> <return type="Vector3"> </return> <description> Returns the normalized longest axis of the [AABB]. </description> </method> - <method name="get_longest_axis_index"> + <method name="get_longest_axis_index" qualifiers="const"> <return type="int"> </return> <description> Returns the index of the longest axis of the [AABB] (according to [Vector3]'s [code]AXIS_*[/code] constants). </description> </method> - <method name="get_longest_axis_size"> + <method name="get_longest_axis_size" qualifiers="const"> <return type="float"> </return> <description> Returns the scalar length of the longest axis of the [AABB]. </description> </method> - <method name="get_shortest_axis"> + <method name="get_shortest_axis" qualifiers="const"> <return type="Vector3"> </return> <description> Returns the normalized shortest axis of the [AABB]. </description> </method> - <method name="get_shortest_axis_index"> + <method name="get_shortest_axis_index" qualifiers="const"> <return type="int"> </return> <description> Returns the index of the shortest axis of the [AABB] (according to [Vector3]::AXIS* enum). </description> </method> - <method name="get_shortest_axis_size"> + <method name="get_shortest_axis_size" qualifiers="const"> <return type="float"> </return> <description> Returns the scalar length of the shortest axis of the [AABB]. </description> </method> - <method name="get_support"> + <method name="get_support" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="dir" type="Vector3"> @@ -133,7 +133,7 @@ Returns the support point in a given direction. This is useful for collision detection algorithms. </description> </method> - <method name="grow"> + <method name="grow" qualifiers="const"> <return type="AABB"> </return> <argument index="0" name="by" type="float"> @@ -142,21 +142,21 @@ Returns a copy of the [AABB] grown a given amount of units towards all the sides. </description> </method> - <method name="has_no_area"> + <method name="has_no_area" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the [AABB] is flat or empty. </description> </method> - <method name="has_no_surface"> + <method name="has_no_surface" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the [AABB] is empty. </description> </method> - <method name="has_point"> + <method name="has_point" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="point" type="Vector3"> @@ -165,7 +165,7 @@ Returns [code]true[/code] if the [AABB] contains a point. </description> </method> - <method name="intersection"> + <method name="intersection" qualifiers="const"> <return type="AABB"> </return> <argument index="0" name="with" type="AABB"> @@ -174,7 +174,7 @@ Returns the intersection between two [AABB]. An empty AABB (size 0,0,0) is returned on failure. </description> </method> - <method name="intersects"> + <method name="intersects" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="with" type="AABB"> @@ -183,7 +183,7 @@ Returns [code]true[/code] if the [AABB] overlaps with another. </description> </method> - <method name="intersects_plane"> + <method name="intersects_plane" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="plane" type="Plane"> @@ -192,7 +192,7 @@ Returns [code]true[/code] if the [AABB] is on both sides of a plane. </description> </method> - <method name="intersects_ray"> + <method name="intersects_ray" qualifiers="const"> <return type="Variant"> </return> <argument index="0" name="from" type="Vector3"> @@ -202,7 +202,7 @@ <description> </description> </method> - <method name="intersects_segment"> + <method name="intersects_segment" qualifiers="const"> <return type="Variant"> </return> <argument index="0" name="from" type="Vector3"> @@ -213,7 +213,7 @@ Returns [code]true[/code] if the [AABB] intersects the line segment between [code]from[/code] and [code]to[/code]. </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="aabb" type="AABB"> @@ -222,7 +222,7 @@ Returns [code]true[/code] if this [AABB] and [code]aabb[/code] are approximately equal, by calling [method @GlobalScope.is_equal_approx] on each component. </description> </method> - <method name="merge"> + <method name="merge" qualifiers="const"> <return type="AABB"> </return> <argument index="0" name="with" type="AABB"> @@ -264,7 +264,7 @@ Beginning corner. Typically has values lower than [member end]. </member> <member name="size" type="Vector3" setter="" getter="" default="Vector3( 0, 0, 0 )"> - Size from [member position] to [member end]. Typically all components are positive. + Size from [member position] to [member end]. Typically, all components are positive. If the size is negative, you can use [method abs] to fix it. </member> </members> diff --git a/doc/classes/AStar.xml b/doc/classes/AStar.xml index bfdc66623d..e975b8ed28 100644 --- a/doc/classes/AStar.xml +++ b/doc/classes/AStar.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="AStar" inherits="Reference" version="4.0"> <brief_description> - An implementation of A* to find shortest paths among connected points in space. + An implementation of A* to find the shortest paths among connected points in space. </brief_description> <description> A* (A star) is a computer algorithm that is widely used in pathfinding and graph traversal, the process of plotting short paths among vertices (points), passing through a given set of edges (segments). It enjoys widespread use due to its performance and accuracy. Godot's A* implementation uses points in three-dimensional space and Euclidean distances by default. diff --git a/doc/classes/AnimatedSprite3D.xml b/doc/classes/AnimatedSprite3D.xml index e1fb78e5b5..02ccab4e05 100644 --- a/doc/classes/AnimatedSprite3D.xml +++ b/doc/classes/AnimatedSprite3D.xml @@ -49,6 +49,11 @@ </member> </members> <signals> + <signal name="animation_finished"> + <description> + Emitted when the animation is finished (when it plays the last frame). If the animation is looping, this signal is emitted every time the last frame is drawn. + </description> + </signal> <signal name="frame_changed"> <description> Emitted when [member frame] changed. diff --git a/doc/classes/Animation.xml b/doc/classes/Animation.xml index 9720405ffd..7ceb21d22e 100644 --- a/doc/classes/Animation.xml +++ b/doc/classes/Animation.xml @@ -710,7 +710,7 @@ [b]Note:[/b] Length is not delimited by the last key, as this one may be before or after the end to ensure correct interpolation and looping. </member> <member name="loop" type="bool" setter="set_loop" getter="has_loop" default="false"> - A flag indicating that the animation must loop. This is uses for correct interpolation of animation cycles, and for hinting the player that it must restart the animation. + A flag indicating that the animation must loop. This is used for correct interpolation of animation cycles, and for hinting the player that it must restart the animation. </member> <member name="step" type="float" setter="set_step" getter="get_step" default="0.1"> The animation step value. diff --git a/doc/classes/AnimationPlayer.xml b/doc/classes/AnimationPlayer.xml index bebff61671..7696f36009 100644 --- a/doc/classes/AnimationPlayer.xml +++ b/doc/classes/AnimationPlayer.xml @@ -237,7 +237,7 @@ </member> <member name="current_animation" type="String" setter="set_current_animation" getter="get_current_animation" default=""""> The name of the currently playing animation. If no animation is playing, the property's value is an empty string. Changing this value does not restart the animation. See [method play] for more information on playing animations. - [b]Note[/b]: while this property appears in the inspector, it's not meant to be edited and it's not saved in the scene. This property is mainly used to get the currently playing animation, and internally for animation playback tracks. For more information, see [Animation]. + [b]Note[/b]: while this property appears in the inspector, it's not meant to be edited, and it's not saved in the scene. This property is mainly used to get the currently playing animation, and internally for animation playback tracks. For more information, see [Animation]. </member> <member name="current_animation_length" type="float" setter="" getter="get_current_animation_length"> The length (in seconds) of the currently being played animation. @@ -254,7 +254,7 @@ <member name="playback_default_blend_time" type="float" setter="set_default_blend_time" getter="get_default_blend_time" default="0.0"> The default time in which to blend animations. Ranges from 0 to 4096 with 0.01 precision. </member> - <member name="playback_process_mode" type="int" setter="set_animation_process_mode" getter="get_animation_process_mode" enum="AnimationPlayer.AnimationProcessMode" default="1"> + <member name="playback_process_mode" type="int" setter="set_process_callback" getter="get_process_callback" enum="AnimationPlayer.AnimationProcessCallback" default="1"> The process notification in which to update animations. </member> <member name="playback_speed" type="float" setter="set_speed_scale" getter="get_speed_scale" default="1.0"> @@ -299,13 +299,13 @@ </signal> </signals> <constants> - <constant name="ANIMATION_PROCESS_PHYSICS" value="0" enum="AnimationProcessMode"> + <constant name="ANIMATION_PROCESS_PHYSICS" value="0" enum="AnimationProcessCallback"> Process animation during the physics process. This is especially useful when animating physics bodies. </constant> - <constant name="ANIMATION_PROCESS_IDLE" value="1" enum="AnimationProcessMode"> + <constant name="ANIMATION_PROCESS_IDLE" value="1" enum="AnimationProcessCallback"> Process animation during the idle process. </constant> - <constant name="ANIMATION_PROCESS_MANUAL" value="2" enum="AnimationProcessMode"> + <constant name="ANIMATION_PROCESS_MANUAL" value="2" enum="AnimationProcessCallback"> Do not process animation. Use [method advance] to process the animation manually. </constant> <constant name="ANIMATION_METHOD_CALL_DEFERRED" value="0" enum="AnimationMethodCallMode"> diff --git a/doc/classes/AnimationTree.xml b/doc/classes/AnimationTree.xml index 262b5addb7..2517941133 100644 --- a/doc/classes/AnimationTree.xml +++ b/doc/classes/AnimationTree.xml @@ -45,8 +45,8 @@ <member name="anim_player" type="NodePath" setter="set_animation_player" getter="get_animation_player" default="NodePath("")"> The path to the [AnimationPlayer] used for animating. </member> - <member name="process_mode" type="int" setter="set_process_mode" getter="get_process_mode" enum="AnimationTree.AnimationProcessMode" default="1"> - The process mode of this [AnimationTree]. See [enum AnimationProcessMode] for available modes. + <member name="process_callback" type="int" setter="set_process_callback" getter="get_process_callback" enum="AnimationTree.AnimationProcessCallback" default="1"> + The process mode of this [AnimationTree]. See [enum AnimationProcessCallback] for available modes. </member> <member name="root_motion_track" type="NodePath" setter="set_root_motion_track" getter="get_root_motion_track" default="NodePath("")"> The path to the Animation track used for root motion. Paths must be valid scene-tree paths to a node, and must be specified starting from the parent node of the node that will reproduce the animation. To specify a track that controls properties or bones, append its name after the path, separated by [code]":"[/code]. For example, [code]"character/skeleton:ankle"[/code] or [code]"character/mesh:transform/local"[/code]. @@ -57,13 +57,13 @@ </member> </members> <constants> - <constant name="ANIMATION_PROCESS_PHYSICS" value="0" enum="AnimationProcessMode"> + <constant name="ANIMATION_PROCESS_PHYSICS" value="0" enum="AnimationProcessCallback"> The animations will progress during the physics frame (i.e. [method Node._physics_process]). </constant> - <constant name="ANIMATION_PROCESS_IDLE" value="1" enum="AnimationProcessMode"> + <constant name="ANIMATION_PROCESS_IDLE" value="1" enum="AnimationProcessCallback"> The animations will progress during the idle frame (i.e. [method Node._process]). </constant> - <constant name="ANIMATION_PROCESS_MANUAL" value="2" enum="AnimationProcessMode"> + <constant name="ANIMATION_PROCESS_MANUAL" value="2" enum="AnimationProcessCallback"> The animations will only progress manually (see [method advance]). </constant> </constants> diff --git a/doc/classes/Area2D.xml b/doc/classes/Area2D.xml index a02f077cf7..9711a2a35b 100644 --- a/doc/classes/Area2D.xml +++ b/doc/classes/Area2D.xml @@ -187,7 +187,7 @@ </description> </signal> <signal name="body_entered"> - <argument index="0" name="body" type="Node"> + <argument index="0" name="body" type="Node2D"> </argument> <description> Emitted when a [PhysicsBody2D] or [TileMap] enters this Area2D. Requires [member monitoring] to be set to [code]true[/code]. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. @@ -195,7 +195,7 @@ </description> </signal> <signal name="body_exited"> - <argument index="0" name="body" type="Node"> + <argument index="0" name="body" type="Node2D"> </argument> <description> Emitted when a [PhysicsBody2D] or [TileMap] exits this Area2D. Requires [member monitoring] to be set to [code]true[/code]. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. @@ -205,7 +205,7 @@ <signal name="body_shape_entered"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Node"> + <argument index="1" name="body" type="Node2D"> </argument> <argument index="2" name="body_shape" type="int"> </argument> @@ -222,7 +222,7 @@ <signal name="body_shape_exited"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Node"> + <argument index="1" name="body" type="Node2D"> </argument> <argument index="2" name="body_shape" type="int"> </argument> diff --git a/doc/classes/Area3D.xml b/doc/classes/Area3D.xml index bd43d619dd..4271769155 100644 --- a/doc/classes/Area3D.xml +++ b/doc/classes/Area3D.xml @@ -197,7 +197,7 @@ </description> </signal> <signal name="body_entered"> - <argument index="0" name="body" type="Node"> + <argument index="0" name="body" type="Node3D"> </argument> <description> Emitted when a [PhysicsBody3D] or [GridMap] enters this Area3D. Requires [member monitoring] to be set to [code]true[/code]. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. @@ -205,7 +205,7 @@ </description> </signal> <signal name="body_exited"> - <argument index="0" name="body" type="Node"> + <argument index="0" name="body" type="Node3D"> </argument> <description> Emitted when a [PhysicsBody3D] or [GridMap] exits this Area3D. Requires [member monitoring] to be set to [code]true[/code]. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. @@ -215,7 +215,7 @@ <signal name="body_shape_entered"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Node"> + <argument index="1" name="body" type="Node3D"> </argument> <argument index="2" name="body_shape" type="int"> </argument> @@ -232,7 +232,7 @@ <signal name="body_shape_exited"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Node"> + <argument index="1" name="body" type="Node3D"> </argument> <argument index="2" name="body_shape" type="int"> </argument> diff --git a/doc/classes/Array.xml b/doc/classes/Array.xml index de3d89ee0f..54bbe7a94b 100644 --- a/doc/classes/Array.xml +++ b/doc/classes/Array.xml @@ -166,7 +166,7 @@ [/codeblock] </description> </method> - <method name="back"> + <method name="back" qualifiers="const"> <return type="Variant"> </return> <description> @@ -191,15 +191,13 @@ </return> <argument index="0" name="value" type="Variant"> </argument> - <argument index="1" name="obj" type="Object"> + <argument index="1" name="func" type="Callable"> </argument> - <argument index="2" name="func" type="StringName"> - </argument> - <argument index="3" name="before" type="bool" default="true"> + <argument index="2" name="before" type="bool" default="true"> </argument> <description> Finds the index of an existing value (or the insertion index that maintains sorting order, if the value is not yet present in the array) using binary search and a custom comparison method. Optionally, a [code]before[/code] specifier can be passed. If [code]false[/code], the returned index comes after all existing entries of the value in the array. The custom method receives two arguments (an element from the array and the value searched for) and must return [code]true[/code] if the first argument is less than the second, and return [code]false[/code] otherwise. - [b]Note:[/b] Calling [method bsearch] on an unsorted array results in unexpected behavior. + [b]Note:[/b] Calling [method bsearch_custom] on an unsorted array results in unexpected behavior. </description> </method> <method name="clear"> @@ -209,7 +207,7 @@ Clears the array. This is equivalent to using [method resize] with a size of [code]0[/code]. </description> </method> - <method name="count"> + <method name="count" qualifiers="const"> <return type="int"> </return> <argument index="0" name="value" type="Variant"> @@ -218,7 +216,7 @@ Returns the number of times an element is in the array. </description> </method> - <method name="duplicate"> + <method name="duplicate" qualifiers="const"> <return type="Array"> </return> <argument index="0" name="deep" type="bool" default="false"> @@ -239,7 +237,7 @@ [b]Note:[/b] On large arrays, this method will be slower if the removed element is close to the beginning of the array (index 0). This is because all elements placed after the removed element have to be reindexed. </description> </method> - <method name="find"> + <method name="find" qualifiers="const"> <return type="int"> </return> <argument index="0" name="what" type="Variant"> @@ -250,7 +248,7 @@ Searches the array for a value and returns its index or [code]-1[/code] if not found. Optionally, the initial search index can be passed. </description> </method> - <method name="find_last"> + <method name="find_last" qualifiers="const"> <return type="int"> </return> <argument index="0" name="value" type="Variant"> @@ -259,7 +257,7 @@ Searches the array in reverse order for a value and returns its index or [code]-1[/code] if not found. </description> </method> - <method name="front"> + <method name="front" qualifiers="const"> <return type="Variant"> </return> <description> @@ -267,7 +265,7 @@ [b]Note:[/b] Calling this function is not the same as writing [code]array[0][/code]. If the array is empty, accessing by index will pause project execution when running from the editor. </description> </method> - <method name="has"> + <method name="has" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="value" type="Variant"> @@ -309,7 +307,7 @@ [/codeblocks] </description> </method> - <method name="hash"> + <method name="hash" qualifiers="const"> <return type="int"> </return> <description> @@ -330,28 +328,21 @@ [b]Note:[/b] On large arrays, this method will be slower if the inserted element is close to the beginning of the array (index 0). This is because all elements placed after the newly inserted element have to be reindexed. </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the array is empty. </description> </method> - <method name="max"> + <method name="max" qualifiers="const"> <return type="Variant"> </return> <description> Returns the maximum value contained in the array if all elements are of comparable types. If the elements can't be compared, [code]null[/code] is returned. </description> </method> - <method name="min"> + <method name="min" qualifiers="const"> <return type="Variant"> </return> <description> @@ -476,7 +467,14 @@ Resizes the array to contain a different number of elements. If the array size is smaller, elements are cleared, if bigger, new elements are [code]null[/code]. </description> </method> - <method name="rfind"> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> + <method name="rfind" qualifiers="const"> <return type="int"> </return> <argument index="0" name="what" type="Variant"> @@ -494,14 +492,14 @@ Shuffles the array such that the items will have a random order. This method uses the global random number generator common to methods such as [method @GlobalScope.randi]. Call [method @GlobalScope.randomize] to ensure that a new seed will be used each time if you want non-reproducible shuffling. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> Returns the number of elements in the array. </description> </method> - <method name="slice"> + <method name="slice" qualifiers="const"> <return type="Array"> </return> <argument index="0" name="begin" type="int"> @@ -537,12 +535,10 @@ <method name="sort_custom"> <return type="void"> </return> - <argument index="0" name="obj" type="Object"> - </argument> - <argument index="1" name="func" type="StringName"> + <argument index="0" name="func" type="Callable"> </argument> <description> - Sorts the array using a custom method. The arguments are an object that holds the method and the name of such method. The custom method receives two arguments (a pair of elements from the array) and must return either [code]true[/code] or [code]false[/code]. + Sorts the array using a custom method. The custom method receives two arguments (a pair of elements from the array) and must return either [code]true[/code] or [code]false[/code]. [b]Note:[/b] you cannot randomize the return value as the heapsort algorithm expects a deterministic result. Doing so will result in unexpected behavior. [codeblocks] [gdscript] @@ -553,7 +549,7 @@ return false var my_items = [[5, "Potato"], [9, "Rice"], [4, "Tomato"]] - my_items.sort_custom(MyCustomSorter, "sort_ascending") + my_items.sort_custom(MyCustomSorter.sort_ascending) print(my_items) # Prints [[4, Tomato], [5, Potato], [9, Rice]]. [/gdscript] [csharp] diff --git a/doc/classes/ArrayMesh.xml b/doc/classes/ArrayMesh.xml index 1f532f4843..7c1c4656f8 100644 --- a/doc/classes/ArrayMesh.xml +++ b/doc/classes/ArrayMesh.xml @@ -128,6 +128,16 @@ Will regenerate normal maps for the [ArrayMesh]. </description> </method> + <method name="set_blend_shape_name"> + <return type="void"> + </return> + <argument index="0" name="index" type="int"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <description> + </description> + </method> <method name="surface_find_by_name" qualifiers="const"> <return type="int"> </return> @@ -215,6 +225,8 @@ <member name="custom_aabb" type="AABB" setter="set_custom_aabb" getter="get_custom_aabb" default="AABB( 0, 0, 0, 0, 0, 0 )"> Overrides the [AABB] with one defined by user for use with frustum culling. Especially useful to avoid unexpected culling when using a shader to offset vertices. </member> + <member name="shadow_mesh" type="ArrayMesh" setter="set_shadow_mesh" getter="get_shadow_mesh"> + </member> </members> <constants> </constants> diff --git a/doc/classes/AtlasTexture.xml b/doc/classes/AtlasTexture.xml index 5bc077ef49..9865319419 100644 --- a/doc/classes/AtlasTexture.xml +++ b/doc/classes/AtlasTexture.xml @@ -1,10 +1,11 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="AtlasTexture" inherits="Texture2D" version="4.0"> <brief_description> - Packs multiple small textures in a single, bigger one. Helps to optimize video memory costs and render calls. + Crops out one part of a texture, such as a texture from a texture atlas. </brief_description> <description> - [Texture2D] resource aimed at managing big textures files that pack multiple smaller textures. Consists of a [Texture2D], a margin that defines the border width, and a region that defines the actual area of the AtlasTexture. + [Texture2D] resource that crops out one part of the [member atlas] texture, defined by [member region]. The main use case is cropping out textures from a texture atlas, which is a big texture file that packs multiple smaller textures. Consists of a [Texture2D] for the [member atlas], a [member region] that defines the area of [member atlas] to use, and a [member margin] that defines the border width. + [AtlasTexture] cannot be used in an [AnimatedTexture], cannot be tiled in nodes such as [TextureRect], and does not work properly if used inside of other [AtlasTexture] resources. Multiple [AtlasTexture] resources can be used to crop multiple textures from the atlas. Using a texture atlas helps to optimize video memory costs and render calls compared to using multiple small files. </description> <tutorials> </tutorials> diff --git a/doc/classes/AudioEffectCapture.xml b/doc/classes/AudioEffectCapture.xml new file mode 100644 index 0000000000..c7ee621ca6 --- /dev/null +++ b/doc/classes/AudioEffectCapture.xml @@ -0,0 +1,75 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="AudioEffectCapture" inherits="AudioEffect" version="4.0"> + <brief_description> + Captures audio from an audio bus in real-time. + </brief_description> + <description> + AudioEffectCapture is an AudioEffect which copies all audio frames from the attached audio effect bus into its internal ring buffer. + Application code should consume these audio frames from this ring buffer using [method get_buffer] and process it as needed, for example to capture data from a microphone, implement application defined effects, or to transmit audio over the network. + </description> + <tutorials> + </tutorials> + <methods> + <method name="can_get_buffer" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="frames" type="int"> + </argument> + <description> + Returns [code]true[/code] if at least [code]frames[/code] audio frames are available to read in the internal ring buffer. + </description> + </method> + <method name="clear_buffer"> + <return type="void"> + </return> + <description> + Clears the internal ring buffer. + </description> + </method> + <method name="get_buffer"> + <return type="PackedVector2Array"> + </return> + <argument index="0" name="frames" type="int"> + </argument> + <description> + Gets the next [code]frames[/code] audio samples from the internal ring buffer. + Returns a [PackedVector2Array] containing exactly [code]frames[/code] audio samples if available, or an empty [PackedVector2Array] if insufficient data was available. + </description> + </method> + <method name="get_buffer_length_frames" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the total size of the internal ring buffer in frames. + </description> + </method> + <method name="get_discarded_frames" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the number of audio frames discarded from the audio bus due to full buffer. + </description> + </method> + <method name="get_frames_available" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the number of frames available to read using [method get_buffer]. + </description> + </method> + <method name="get_pushed_frames" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the number of audio frames inserted from the audio bus. + </description> + </method> + </methods> + <members> + <member name="buffer_length" type="float" setter="set_buffer_length" getter="get_buffer_length" default="0.1"> + Length of the internal ring buffer, in seconds. Setting the buffer length will have no effect if already initialized. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/BackBufferCopy.xml b/doc/classes/BackBufferCopy.xml index 7cc6a5613b..9a70b8f20c 100644 --- a/doc/classes/BackBufferCopy.xml +++ b/doc/classes/BackBufferCopy.xml @@ -4,7 +4,7 @@ Copies a region of the screen (or the whole screen) to a buffer so it can be accessed in your shader scripts through the [code]texture(SCREEN_TEXTURE, ...)[/code] function. </brief_description> <description> - Node for back-buffering the currently-displayed screen. The region defined in the BackBufferCopy node is bufferized with the content of the screen it covers, or the entire screen according to the copy mode set. Use the [code]texture(SCREEN_TEXTURE, ...)[/code] function in your shader scripts to access the buffer. + Node for back-buffering the currently-displayed screen. The region defined in the BackBufferCopy node is buffered with the content of the screen it covers, or the entire screen according to the copy mode set. Use the [code]texture(SCREEN_TEXTURE, ...)[/code] function in your shader scripts to access the buffer. [b]Note:[/b] Since this node inherits from [Node2D] (and not [Control]), anchors and margins won't apply to child [Control]-derived nodes. This can be problematic when resizing the window. To avoid this, add [Control]-derived nodes as [i]siblings[/i] to the BackBufferCopy node instead of adding them as children. </description> <tutorials> diff --git a/doc/classes/BakedLightmapData.xml b/doc/classes/BakedLightmapData.xml index 026477782a..904555c48e 100644 --- a/doc/classes/BakedLightmapData.xml +++ b/doc/classes/BakedLightmapData.xml @@ -12,11 +12,11 @@ </return> <argument index="0" name="path" type="NodePath"> </argument> - <argument index="1" name="lightmap" type="Rect2"> + <argument index="1" name="uv_scale" type="Rect2"> </argument> - <argument index="2" name="offset" type="int"> + <argument index="2" name="slice_index" type="int"> </argument> - <argument index="3" name="arg3" type="int"> + <argument index="3" name="sub_instance" type="int"> </argument> <description> </description> diff --git a/doc/classes/BaseButton.xml b/doc/classes/BaseButton.xml index 45ef4cb14c..f7e31f5f9c 100644 --- a/doc/classes/BaseButton.xml +++ b/doc/classes/BaseButton.xml @@ -49,7 +49,7 @@ </member> <member name="button_mask" type="int" setter="set_button_mask" getter="get_button_mask" default="1"> Binary mask to choose which mouse buttons this button will respond to. - To allow both left-click and right-click, use [code]BUTTON_MASK_LEFT | BUTTON_MASK_RIGHT[/code]. + To allow both left-click and right-click, use [code]MOUSE_BUTTON_MASK_LEFT | MOUSE_BUTTON_MASK_RIGHT[/code]. </member> <member name="disabled" type="bool" setter="set_disabled" getter="is_disabled" default="false"> If [code]true[/code], the button is in disabled state and can't be clicked or toggled. diff --git a/doc/classes/BaseMaterial3D.xml b/doc/classes/BaseMaterial3D.xml index 31e6ea5e54..c87398ac8f 100644 --- a/doc/classes/BaseMaterial3D.xml +++ b/doc/classes/BaseMaterial3D.xml @@ -82,7 +82,7 @@ Texture to multiply by [member albedo_color]. Used for basic texturing of objects. </member> <member name="alpha_antialiasing_edge" type="float" setter="set_alpha_antialiasing_edge" getter="get_alpha_antialiasing_edge"> - Threshold at which antialiasing will by applied on the alpha channel. + Threshold at which antialiasing will be applied on the alpha channel. </member> <member name="alpha_antialiasing_mode" type="int" setter="set_alpha_antialiasing" getter="get_alpha_antialiasing" enum="BaseMaterial3D.AlphaAntiAliasing"> The type of alpha antialiasing to apply. See [enum AlphaAntiAliasing]. @@ -93,7 +93,7 @@ <member name="alpha_scissor_threshold" type="float" setter="set_alpha_scissor_threshold" getter="get_alpha_scissor_threshold"> Threshold at which the alpha scissor will discard values. </member> - <member name="anisotropy" type="float" setter="set_anisotropy" getter="get_anisotropy"> + <member name="anisotropy" type="float" setter="set_anisotropy" getter="get_anisotropy" default="0.0"> The strength of the anisotropy effect. </member> <member name="anisotropy_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> @@ -105,19 +105,19 @@ <member name="ao_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> If [code]true[/code], ambient occlusion is enabled. Ambient occlusion darkens areas based on the [member ao_texture]. </member> - <member name="ao_light_affect" type="float" setter="set_ao_light_affect" getter="get_ao_light_affect"> + <member name="ao_light_affect" type="float" setter="set_ao_light_affect" getter="get_ao_light_affect" default="0.0"> Amount that ambient occlusion affects lighting from lights. If [code]0[/code], ambient occlusion only affects ambient light. If [code]1[/code], ambient occlusion affects lights just as much as it affects ambient light. This can be used to impact the strength of the ambient occlusion effect, but typically looks unrealistic. </member> - <member name="ao_on_uv2" type="bool" setter="set_flag" getter="get_flag"> + <member name="ao_on_uv2" type="bool" setter="set_flag" getter="get_flag" default="false"> If [code]true[/code], use [code]UV2[/code] coordinates to look up from the [member ao_texture]. </member> <member name="ao_texture" type="Texture2D" setter="set_texture" getter="get_texture"> Texture that defines the amount of ambient occlusion for a given point on the object. </member> - <member name="ao_texture_channel" type="int" setter="set_ao_texture_channel" getter="get_ao_texture_channel" enum="BaseMaterial3D.TextureChannel"> + <member name="ao_texture_channel" type="int" setter="set_ao_texture_channel" getter="get_ao_texture_channel" enum="BaseMaterial3D.TextureChannel" default="0"> Specifies the channel of the [member ao_texture] in which the ambient occlusion information is stored. This is useful when you store the information for multiple effects in a single texture. For example if you stored metallic in the red channel, roughness in the blue, and ambient occlusion in the green you could reduce the number of textures you use. </member> - <member name="backlight" type="Color" setter="set_backlight" getter="get_backlight"> + <member name="backlight" type="Color" setter="set_backlight" getter="get_backlight" default="Color( 0, 0, 0, 1 )"> The color used by the backlight effect. Represents the light passing through an object. </member> <member name="backlight_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> @@ -127,7 +127,7 @@ Texture used to control the backlight effect per-pixel. Added to [member backlight]. </member> <member name="billboard_keep_scale" type="bool" setter="set_flag" getter="get_flag" default="false"> - If [code]true[/code], the shader will keep the scale set for the mesh. Otherwise the scale is lost when billboarding. Only applies when [member billboard_mode] is [constant BILLBOARD_ENABLED]. + If [code]true[/code], the shader will keep the scale set for the mesh. Otherwise, the scale is lost when billboarding. Only applies when [member billboard_mode] is [constant BILLBOARD_ENABLED]. </member> <member name="billboard_mode" type="int" setter="set_billboard_mode" getter="get_billboard_mode" enum="BaseMaterial3D.BillboardMode" default="0"> Controls how the object faces the camera. See [enum BillboardMode]. @@ -137,13 +137,13 @@ The material's blend mode. [b]Note:[/b] Values other than [code]Mix[/code] force the object into the transparent pipeline. See [enum BlendMode]. </member> - <member name="clearcoat" type="float" setter="set_clearcoat" getter="get_clearcoat"> + <member name="clearcoat" type="float" setter="set_clearcoat" getter="get_clearcoat" default="1.0"> Sets the strength of the clearcoat effect. Setting to [code]0[/code] looks the same as disabling the clearcoat effect. </member> <member name="clearcoat_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> If [code]true[/code], clearcoat rendering is enabled. Adds a secondary transparent pass to the lighting calculation resulting in an added specular blob. This makes materials appear as if they have a clear layer on them that can be either glossy or rough. </member> - <member name="clearcoat_gloss" type="float" setter="set_clearcoat_gloss" getter="get_clearcoat_gloss"> + <member name="clearcoat_gloss" type="float" setter="set_clearcoat_gloss" getter="get_clearcoat_gloss" default="0.5"> Sets the roughness of the clearcoat pass. A higher value results in a smoother clearcoat while a lower value results in a rougher clearcoat. </member> <member name="clearcoat_texture" type="Texture2D" setter="set_texture" getter="get_texture"> @@ -158,7 +158,7 @@ <member name="detail_albedo" type="Texture2D" setter="set_texture" getter="get_texture"> Texture that specifies the color of the detail overlay. </member> - <member name="detail_blend_mode" type="int" setter="set_detail_blend_mode" getter="get_detail_blend_mode" enum="BaseMaterial3D.BlendMode"> + <member name="detail_blend_mode" type="int" setter="set_detail_blend_mode" getter="get_detail_blend_mode" enum="BaseMaterial3D.BlendMode" default="0"> Specifies how the [member detail_albedo] should blend with the current [code]ALBEDO[/code]. See [enum BlendMode] for options. </member> <member name="detail_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> @@ -171,7 +171,7 @@ Texture that specifies the per-pixel normal of the detail overlay. [b]Note:[/b] Godot expects the normal map to use X+, Y-, and Z+ coordinates. See [url=http://wiki.polycount.com/wiki/Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for a comparison of normal map coordinates expected by popular engines. </member> - <member name="detail_uv_layer" type="int" setter="set_detail_uv" getter="get_detail_uv" enum="BaseMaterial3D.DetailUV"> + <member name="detail_uv_layer" type="int" setter="set_detail_uv" getter="get_detail_uv" enum="BaseMaterial3D.DetailUV" default="0"> Specifies whether to use [code]UV[/code] or [code]UV2[/code] for the detail layer. See [enum DetailUV] for options. </member> <member name="diffuse_mode" type="int" setter="set_diffuse_mode" getter="get_diffuse_mode" enum="BaseMaterial3D.DiffuseMode" default="0"> @@ -183,30 +183,30 @@ <member name="disable_receive_shadows" type="bool" setter="set_flag" getter="get_flag" default="false"> If [code]true[/code], the object receives no shadow that would otherwise be cast onto it. </member> - <member name="distance_fade_max_distance" type="float" setter="set_distance_fade_max_distance" getter="get_distance_fade_max_distance"> + <member name="distance_fade_max_distance" type="float" setter="set_distance_fade_max_distance" getter="get_distance_fade_max_distance" default="10.0"> Distance at which the object appears fully opaque. [b]Note:[/b] If [code]distance_fade_max_distance[/code] is less than [code]distance_fade_min_distance[/code], the behavior will be reversed. The object will start to fade away at [code]distance_fade_max_distance[/code] and will fully disappear once it reaches [code]distance_fade_min_distance[/code]. </member> - <member name="distance_fade_min_distance" type="float" setter="set_distance_fade_min_distance" getter="get_distance_fade_min_distance"> + <member name="distance_fade_min_distance" type="float" setter="set_distance_fade_min_distance" getter="get_distance_fade_min_distance" default="0.0"> Distance at which the object starts to become visible. If the object is less than this distance away, it will be invisible. [b]Note:[/b] If [code]distance_fade_min_distance[/code] is greater than [code]distance_fade_max_distance[/code], the behavior will be reversed. The object will start to fade away at [code]distance_fade_max_distance[/code] and will fully disappear once it reaches [code]distance_fade_min_distance[/code]. </member> <member name="distance_fade_mode" type="int" setter="set_distance_fade" getter="get_distance_fade" enum="BaseMaterial3D.DistanceFadeMode" default="0"> Specifies which type of fade to use. Can be any of the [enum DistanceFadeMode]s. </member> - <member name="emission" type="Color" setter="set_emission" getter="get_emission"> + <member name="emission" type="Color" setter="set_emission" getter="get_emission" default="Color( 0, 0, 0, 1 )"> The emitted light's color. See [member emission_enabled]. </member> <member name="emission_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> If [code]true[/code], the body emits light. Emitting light makes the object appear brighter. The object can also cast light on other objects if a [GIProbe] is used and this object is used in baked lighting. </member> - <member name="emission_energy" type="float" setter="set_emission_energy" getter="get_emission_energy"> + <member name="emission_energy" type="float" setter="set_emission_energy" getter="get_emission_energy" default="1.0"> The emitted light's strength. See [member emission_enabled]. </member> - <member name="emission_on_uv2" type="bool" setter="set_flag" getter="get_flag"> + <member name="emission_on_uv2" type="bool" setter="set_flag" getter="get_flag" default="false"> Use [code]UV2[/code] to read from the [member emission_texture]. </member> - <member name="emission_operator" type="int" setter="set_emission_operator" getter="get_emission_operator" enum="BaseMaterial3D.EmissionOperator"> + <member name="emission_operator" type="int" setter="set_emission_operator" getter="get_emission_operator" enum="BaseMaterial3D.EmissionOperator" default="0"> Sets how [member emission] interacts with [member emission_texture]. Can either add or multiply. See [enum EmissionOperator] for options. </member> <member name="emission_texture" type="Texture2D" setter="set_texture" getter="get_texture"> @@ -221,21 +221,23 @@ <member name="grow_amount" type="float" setter="set_grow" getter="get_grow" default="0.0"> Grows object vertices in the direction of their normals. </member> - <member name="heightmap_deep_parallax" type="bool" setter="set_heightmap_deep_parallax" getter="is_heightmap_deep_parallax_enabled"> + <member name="heightmap_deep_parallax" type="bool" setter="set_heightmap_deep_parallax" getter="is_heightmap_deep_parallax_enabled" default="false"> </member> <member name="heightmap_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> + If [code]true[/code], height mapping is enabled (also called "parallax mapping" or "depth mapping"). See also [member normal_enabled]. + [b]Note:[/b] Height mapping is not supported if triplanar mapping is used on the same material. The value of [member heightmap_enabled] will be ignored if [member uv1_triplanar] is enabled. </member> - <member name="heightmap_flip_binormal" type="bool" setter="set_heightmap_deep_parallax_flip_binormal" getter="get_heightmap_deep_parallax_flip_binormal"> + <member name="heightmap_flip_binormal" type="bool" setter="set_heightmap_deep_parallax_flip_binormal" getter="get_heightmap_deep_parallax_flip_binormal" default="false"> </member> - <member name="heightmap_flip_tangent" type="bool" setter="set_heightmap_deep_parallax_flip_tangent" getter="get_heightmap_deep_parallax_flip_tangent"> + <member name="heightmap_flip_tangent" type="bool" setter="set_heightmap_deep_parallax_flip_tangent" getter="get_heightmap_deep_parallax_flip_tangent" default="false"> </member> - <member name="heightmap_flip_texture" type="bool" setter="set_flag" getter="get_flag"> + <member name="heightmap_flip_texture" type="bool" setter="set_flag" getter="get_flag" default="false"> </member> <member name="heightmap_max_layers" type="int" setter="set_heightmap_deep_parallax_max_layers" getter="get_heightmap_deep_parallax_max_layers"> </member> <member name="heightmap_min_layers" type="int" setter="set_heightmap_deep_parallax_min_layers" getter="get_heightmap_deep_parallax_min_layers"> </member> - <member name="heightmap_scale" type="float" setter="set_heightmap_scale" getter="get_heightmap_scale"> + <member name="heightmap_scale" type="float" setter="set_heightmap_scale" getter="get_heightmap_scale" default="0.05"> </member> <member name="heightmap_texture" type="Texture2D" setter="set_texture" getter="get_texture"> </member> @@ -258,7 +260,7 @@ <member name="normal_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> If [code]true[/code], normal mapping is enabled. </member> - <member name="normal_scale" type="float" setter="set_normal_scale" getter="get_normal_scale"> + <member name="normal_scale" type="float" setter="set_normal_scale" getter="get_normal_scale" default="1.0"> The strength of the normal map's effect. </member> <member name="normal_texture" type="Texture2D" setter="set_texture" getter="get_texture"> @@ -279,7 +281,7 @@ <member name="point_size" type="float" setter="set_point_size" getter="get_point_size" default="1.0"> The point size in pixels. See [member use_point_size]. </member> - <member name="proximity_fade_distance" type="float" setter="set_proximity_fade_distance" getter="get_proximity_fade_distance"> + <member name="proximity_fade_distance" type="float" setter="set_proximity_fade_distance" getter="get_proximity_fade_distance" default="1.0"> Distance over which the fade effect takes place. The larger the distance the longer it takes for an object to fade. </member> <member name="proximity_fade_enable" type="bool" setter="set_proximity_fade" getter="is_proximity_fade_enabled" default="false"> @@ -288,16 +290,16 @@ <member name="refraction_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> If [code]true[/code], the refraction effect is enabled. Distorts transparency based on light from behind the object. </member> - <member name="refraction_scale" type="float" setter="set_refraction" getter="get_refraction"> + <member name="refraction_scale" type="float" setter="set_refraction" getter="get_refraction" default="0.05"> The strength of the refraction effect. </member> <member name="refraction_texture" type="Texture2D" setter="set_texture" getter="get_texture"> Texture that controls the strength of the refraction per-pixel. Multiplied by [member refraction_scale]. </member> - <member name="refraction_texture_channel" type="int" setter="set_refraction_texture_channel" getter="get_refraction_texture_channel" enum="BaseMaterial3D.TextureChannel"> + <member name="refraction_texture_channel" type="int" setter="set_refraction_texture_channel" getter="get_refraction_texture_channel" enum="BaseMaterial3D.TextureChannel" default="0"> Specifies the channel of the [member ao_texture] in which the ambient occlusion information is stored. This is useful when you store the information for multiple effects in a single texture. For example if you stored metallic in the red channel, roughness in the blue, and ambient occlusion in the green you could reduce the number of textures you use. </member> - <member name="rim" type="float" setter="set_rim" getter="get_rim"> + <member name="rim" type="float" setter="set_rim" getter="get_rim" default="1.0"> Sets the strength of the rim lighting effect. </member> <member name="rim_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> @@ -306,7 +308,7 @@ <member name="rim_texture" type="Texture2D" setter="set_texture" getter="get_texture"> Texture used to set the strength of the rim lighting effect per-pixel. Multiplied by [member rim]. </member> - <member name="rim_tint" type="float" setter="set_rim_tint" getter="get_rim_tint"> + <member name="rim_tint" type="float" setter="set_rim_tint" getter="get_rim_tint" default="0.5"> The amount of to blend light and albedo color when rendering rim effect. If [code]0[/code] the light color is used, while [code]1[/code] means albedo color is used. An intermediate value generally works best. </member> <member name="roughness" type="float" setter="set_roughness" getter="get_roughness" default="1.0"> @@ -330,24 +332,24 @@ <member name="subsurf_scatter_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> If [code]true[/code], subsurface scattering is enabled. Emulates light that penetrates an object's surface, is scattered, and then emerges. </member> - <member name="subsurf_scatter_skin_mode" type="bool" setter="set_flag" getter="get_flag"> + <member name="subsurf_scatter_skin_mode" type="bool" setter="set_flag" getter="get_flag" default="false"> If [code]true[/code], subsurface scattering will use a special mode optimized for the color and density of human skin. </member> - <member name="subsurf_scatter_strength" type="float" setter="set_subsurface_scattering_strength" getter="get_subsurface_scattering_strength"> + <member name="subsurf_scatter_strength" type="float" setter="set_subsurface_scattering_strength" getter="get_subsurface_scattering_strength" default="0.0"> The strength of the subsurface scattering effect. </member> <member name="subsurf_scatter_texture" type="Texture2D" setter="set_texture" getter="get_texture"> Texture used to control the subsurface scattering strength. Stored in the red texture channel. Multiplied by [member subsurf_scatter_strength]. </member> - <member name="subsurf_scatter_transmittance_boost" type="float" setter="set_transmittance_boost" getter="get_transmittance_boost"> + <member name="subsurf_scatter_transmittance_boost" type="float" setter="set_transmittance_boost" getter="get_transmittance_boost" default="0.0"> </member> - <member name="subsurf_scatter_transmittance_color" type="Color" setter="set_transmittance_color" getter="get_transmittance_color"> + <member name="subsurf_scatter_transmittance_color" type="Color" setter="set_transmittance_color" getter="get_transmittance_color" default="Color( 1, 1, 1, 1 )"> </member> - <member name="subsurf_scatter_transmittance_curve" type="float" setter="set_transmittance_curve" getter="get_transmittance_curve"> + <member name="subsurf_scatter_transmittance_curve" type="float" setter="set_transmittance_curve" getter="get_transmittance_curve" default="1.0"> </member> - <member name="subsurf_scatter_transmittance_depth" type="float" setter="set_transmittance_depth" getter="get_transmittance_depth"> + <member name="subsurf_scatter_transmittance_depth" type="float" setter="set_transmittance_depth" getter="get_transmittance_depth" default="0.1"> </member> - <member name="subsurf_scatter_transmittance_enabled" type="bool" setter="set_feature" getter="get_feature"> + <member name="subsurf_scatter_transmittance_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> </member> <member name="subsurf_scatter_transmittance_texture" type="Texture2D" setter="set_texture" getter="get_texture"> </member> diff --git a/doc/classes/Basis.xml b/doc/classes/Basis.xml index 4c9cd5702e..55ae58ee3a 100644 --- a/doc/classes/Basis.xml +++ b/doc/classes/Basis.xml @@ -78,7 +78,7 @@ Constructs a basis matrix from 3 axis vectors (matrix columns). </description> </method> - <method name="determinant"> + <method name="determinant" qualifiers="const"> <return type="float"> </return> <description> @@ -86,7 +86,7 @@ A negative determinant means the basis has a negative scale. A zero determinant means the basis isn't invertible, and is usually considered invalid. </description> </method> - <method name="get_euler"> + <method name="get_euler" qualifiers="const"> <return type="Vector3"> </return> <description> @@ -94,35 +94,35 @@ Consider using the [method get_rotation_quat] method instead, which returns a [Quat] quaternion instead of Euler angles. </description> </method> - <method name="get_orthogonal_index"> + <method name="get_orthogonal_index" qualifiers="const"> <return type="int"> </return> <description> This function considers a discretization of rotations into 24 points on unit sphere, lying along the vectors (x,y,z) with each component being either -1, 0, or 1, and returns the index of the point best representing the orientation of the object. It is mainly used by the [GridMap] editor. For further details, refer to the Godot source code. </description> </method> - <method name="get_rotation_quat"> + <method name="get_rotation_quat" qualifiers="const"> <return type="Quat"> </return> <description> Returns the basis's rotation in the form of a quaternion. See [method get_euler] if you need Euler angles, but keep in mind quaternions should generally be preferred to Euler angles. </description> </method> - <method name="get_scale"> + <method name="get_scale" qualifiers="const"> <return type="Vector3"> </return> <description> Assuming that the matrix is the combination of a rotation and scaling, return the absolute value of scaling factors along each axis. </description> </method> - <method name="inverse"> + <method name="inverse" qualifiers="const"> <return type="Basis"> </return> <description> Returns the inverse of the matrix. </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="b" type="Basis"> @@ -171,14 +171,14 @@ <description> </description> </method> - <method name="orthonormalized"> + <method name="orthonormalized" qualifiers="const"> <return type="Basis"> </return> <description> Returns the orthonormalized version of the matrix (useful to call from time to time to avoid rounding error for orthogonal matrices). This performs a Gram-Schmidt orthonormalization on the basis of the matrix. </description> </method> - <method name="rotated"> + <method name="rotated" qualifiers="const"> <return type="Basis"> </return> <argument index="0" name="axis" type="Vector3"> @@ -189,7 +189,7 @@ Introduce an additional rotation around the given axis by phi (radians). The axis must be a normalized vector. </description> </method> - <method name="scaled"> + <method name="scaled" qualifiers="const"> <return type="Basis"> </return> <argument index="0" name="scale" type="Vector3"> @@ -198,7 +198,7 @@ Introduce an additional scaling specified by the given 3D scaling factor. </description> </method> - <method name="slerp"> + <method name="slerp" qualifiers="const"> <return type="Basis"> </return> <argument index="0" name="to" type="Basis"> @@ -209,7 +209,7 @@ Assuming that the matrix is a proper rotation matrix, slerp performs a spherical-linear interpolation with another rotation matrix. </description> </method> - <method name="tdotx"> + <method name="tdotx" qualifiers="const"> <return type="float"> </return> <argument index="0" name="with" type="Vector3"> @@ -218,7 +218,7 @@ Transposed dot product with the X axis of the matrix. </description> </method> - <method name="tdoty"> + <method name="tdoty" qualifiers="const"> <return type="float"> </return> <argument index="0" name="with" type="Vector3"> @@ -227,7 +227,7 @@ Transposed dot product with the Y axis of the matrix. </description> </method> - <method name="tdotz"> + <method name="tdotz" qualifiers="const"> <return type="float"> </return> <argument index="0" name="with" type="Vector3"> @@ -236,7 +236,7 @@ Transposed dot product with the Z axis of the matrix. </description> </method> - <method name="transposed"> + <method name="transposed" qualifiers="const"> <return type="Basis"> </return> <description> diff --git a/doc/classes/BoxContainer.xml b/doc/classes/BoxContainer.xml index 0d8233e6ff..ffa7c9066a 100644 --- a/doc/classes/BoxContainer.xml +++ b/doc/classes/BoxContainer.xml @@ -10,7 +10,7 @@ </tutorials> <methods> <method name="add_spacer"> - <return type="void"> + <return type="Control"> </return> <argument index="0" name="begin" type="bool"> </argument> diff --git a/doc/classes/Button.xml b/doc/classes/Button.xml index a1ac82012f..51c35b15ce 100644 --- a/doc/classes/Button.xml +++ b/doc/classes/Button.xml @@ -34,6 +34,7 @@ [/codeblocks] Buttons (like all Control nodes) can also be created in the editor, but some situations may require creating them from code. See also [BaseButton] which contains common properties and methods associated with this node. + [b]Note:[/b] Buttons do not interpret touch input and therefore don't support multitouch, since mouse emulation can only press one button at a given time. Use [TouchScreenButton] for buttons that trigger gameplay movement or actions, as [TouchScreenButton] supports multitouch. </description> <tutorials> <link title="2D Dodge The Creeps Demo">https://godotengine.org/asset-library/asset/515</link> @@ -124,8 +125,11 @@ <theme_item name="font_hover_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> Text [Color] used when the [Button] is being hovered. </theme_item> + <theme_item name="font_hover_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> + Text [Color] used when the [Button] is being hovered and pressed. + </theme_item> <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> - Text outline [Color] of the [Button]. + The tint of text outline of the [Button]. </theme_item> <theme_item name="font_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> Text [Color] used when the [Button] is being pressed. @@ -149,7 +153,7 @@ Icon modulate [Color] used when the [Button] is being hovered and pressed. </theme_item> <theme_item name="icon_normal_color" type="Color" default="Color( 1, 1, 1, 1 )"> - Default icon [Color] of the [Button]. + Default icon modulate [Color] of the [Button]. </theme_item> <theme_item name="icon_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> Icon modulate [Color] used when the [Button] is being pressed. @@ -158,7 +162,7 @@ Default [StyleBox] for the [Button]. </theme_item> <theme_item name="outline_size" type="int" default="0"> - Size of the [Button]'s text outline. + The size of the text outline. </theme_item> <theme_item name="pressed" type="StyleBox"> [StyleBox] used when the [Button] is being pressed. diff --git a/doc/classes/Callable.xml b/doc/classes/Callable.xml index f137ede90f..0cfbd0270c 100644 --- a/doc/classes/Callable.xml +++ b/doc/classes/Callable.xml @@ -8,26 +8,26 @@ [b]Example:[/b] [codeblocks] [gdscript] - var callable = Callable(self, "print_args") func print_args(arg1, arg2, arg3 = ""): prints(arg1, arg2, arg3) func test(): - callable.call("hello", "world") # Prints "hello world". + var callable = Callable(self, "print_args") + callable.call("hello", "world") # Prints "hello world ". callable.call(Vector2.UP, 42, callable) # Prints "(0, -1) 42 Node(Node.gd)::print_args". callable.call("invalid") # Invalid call, should have at least 2 arguments. [/gdscript] [csharp] - Callable callable = new Callable(this, "print_args"); - public void PrintArgs(object arg1, object arg2, object arg3 = "") + public void PrintArgs(object arg1, object arg2, object arg3 = null) { GD.PrintS(arg1, arg2, arg3); } public void Test() { - callable.Call("hello", "world"); // Prints "hello world". - callable.Call(Vector2.Up, 42, callable); // Prints "(0, -1) 42 Node(Node.gd)::print_args". + Callable callable = new Callable(this, nameof(PrintArgs)); + callable.Call("hello", "world"); // Prints "hello world null". + callable.Call(Vector2.Up, 42, callable); // Prints "(0, -1) 42 Node(Node.cs)::PrintArgs". callable.Call("invalid"); // Invalid call, should have at least 2 arguments. } [/csharp] @@ -63,69 +63,74 @@ Creates a new [Callable] for the method called [code]method[/code] in the specified [code]object[/code]. </description> </method> - <method name="bind" qualifiers="vararg"> + <method name="bind" qualifiers="vararg const"> <return type="Callable"> </return> <description> + Returns a copy of this [Callable] with the arguments bound. Bound arguments are passed after the arguments supplied by [method call]. </description> </method> - <method name="call" qualifiers="vararg"> + <method name="call" qualifiers="vararg const"> <return type="Variant"> </return> <description> Calls the method represented by this [Callable]. Arguments can be passed and should match the method's signature. </description> </method> - <method name="call_deferred" qualifiers="vararg"> + <method name="call_deferred" qualifiers="vararg const"> <return type="void"> </return> <description> Calls the method represented by this [Callable] in deferred mode, i.e. during the idle frame. Arguments can be passed and should match the method's signature. </description> </method> - <method name="get_method"> + <method name="get_method" qualifiers="const"> <return type="StringName"> </return> <description> Returns the name of the method represented by this [Callable]. </description> </method> - <method name="get_object"> + <method name="get_object" qualifiers="const"> <return type="Object"> </return> <description> Returns the object on which this [Callable] is called. </description> </method> - <method name="get_object_id"> + <method name="get_object_id" qualifiers="const"> <return type="int"> </return> <description> Returns the ID of this [Callable]'s object (see [method Object.get_instance_id]). </description> </method> - <method name="hash"> + <method name="hash" qualifiers="const"> <return type="int"> </return> <description> + Returns the hash value of this [Callable]'s object. </description> </method> - <method name="is_custom"> + <method name="is_custom" qualifiers="const"> <return type="bool"> </return> <description> + Returns [code]true[/code] if this [Callable] is a custom callable whose behavior differs based on implementation details. Custom callables are used in the engine for various reasons. If [code]true[/code], you can't use [method get_method]. </description> </method> - <method name="is_null"> + <method name="is_null" qualifiers="const"> <return type="bool"> </return> <description> + Returns [code]true[/code] if this [Callable] has no target to call the method on. </description> </method> - <method name="is_standard"> + <method name="is_standard" qualifiers="const"> <return type="bool"> </return> <description> + Returns [code]true[/code] if this [Callable] is a standard callable, referencing an object and a method using a [StringName]. </description> </method> <method name="operator !=" qualifiers="operator"> @@ -134,6 +139,7 @@ <argument index="0" name="right" type="Callable"> </argument> <description> + Returns [code]true[/code] if both [Callable]s invoke different targets. </description> </method> <method name="operator ==" qualifiers="operator"> @@ -142,14 +148,16 @@ <argument index="0" name="right" type="Callable"> </argument> <description> + Returns [code]true[/code] if both [Callable]s invoke the same custom target. </description> </method> - <method name="unbind"> + <method name="unbind" qualifiers="const"> <return type="Callable"> </return> <argument index="0" name="argcount" type="int"> </argument> <description> + Returns a copy of this [Callable] with the arguments unbound. Calling the returned [Callable] will call the method without the extra arguments that are supplied in the [Callable] on which you are calling this method. </description> </method> </methods> diff --git a/doc/classes/Camera2D.xml b/doc/classes/Camera2D.xml index 2a4e726d43..d40567bdcb 100644 --- a/doc/classes/Camera2D.xml +++ b/doc/classes/Camera2D.xml @@ -168,8 +168,8 @@ <member name="offset" type="Vector2" setter="set_offset" getter="get_offset" default="Vector2( 0, 0 )"> The camera's offset, useful for looking around or camera shake animations. </member> - <member name="process_mode" type="int" setter="set_process_mode" getter="get_process_mode" enum="Camera2D.Camera2DProcessMode" default="1"> - The camera's process callback. See [enum Camera2DProcessMode]. + <member name="process_callback" type="int" setter="set_process_callback" getter="get_process_callback" enum="Camera2D.Camera2DProcessCallback" default="1"> + The camera's process callback. See [enum Camera2DProcessCallback]. </member> <member name="rotating" type="bool" setter="set_rotating" getter="is_rotating" default="false"> If [code]true[/code], the camera rotates with the target. @@ -191,10 +191,10 @@ <constant name="ANCHOR_MODE_DRAG_CENTER" value="1" enum="AnchorMode"> The camera's position takes into account vertical/horizontal offsets and the screen size. </constant> - <constant name="CAMERA2D_PROCESS_PHYSICS" value="0" enum="Camera2DProcessMode"> + <constant name="CAMERA2D_PROCESS_PHYSICS" value="0" enum="Camera2DProcessCallback"> The camera updates with the [code]_physics_process[/code] callback. </constant> - <constant name="CAMERA2D_PROCESS_IDLE" value="1" enum="Camera2DProcessMode"> + <constant name="CAMERA2D_PROCESS_IDLE" value="1" enum="Camera2DProcessCallback"> The camera updates with the [code]_process[/code] callback. </constant> </constants> diff --git a/doc/classes/Camera3D.xml b/doc/classes/Camera3D.xml index 034b2e9629..9f1d6d8e31 100644 --- a/doc/classes/Camera3D.xml +++ b/doc/classes/Camera3D.xml @@ -194,7 +194,7 @@ </member> <member name="fov" type="float" setter="set_fov" getter="get_fov" default="75.0"> The camera's field of view angle (in degrees). Only applicable in perspective mode. Since [member keep_aspect] locks one axis, [code]fov[/code] sets the other axis' field of view angle. - For reference, the default vertical field of view value ([code]75.0[/code]) is equivalent to an horizontal FOV of: + For reference, the default vertical field of view value ([code]75.0[/code]) is equivalent to a horizontal FOV of: - ~91.31 degrees in a 4:3 viewport - ~101.67 degrees in a 16:10 viewport - ~107.51 degrees in a 16:9 viewport diff --git a/doc/classes/CanvasItem.xml b/doc/classes/CanvasItem.xml index d13f431a16..87b157db4e 100644 --- a/doc/classes/CanvasItem.xml +++ b/doc/classes/CanvasItem.xml @@ -318,7 +318,7 @@ <argument index="9" name="flags" type="int" default="3"> </argument> <description> - Draws [code]text[/code] using the specified [code]font[/code] at the [code]position[/code] (top-left corner). The text will have its color multiplied by [code]modulate[/code]. If [code]clip_w[/code] is greater than or equal to 0, the text will be clipped if it exceeds the specified width. + Draws [code]text[/code] using the specified [code]font[/code] at the [code]position[/code] (bottom-left corner using the baseline of the font). The text will have its color multiplied by [code]modulate[/code]. If [code]clip_w[/code] is greater than or equal to 0, the text will be clipped if it exceeds the specified width. [b]Example using the default project font:[/b] [codeblocks] [gdscript] diff --git a/doc/classes/CharFXTransform.xml b/doc/classes/CharFXTransform.xml index b4cb110337..850098f741 100644 --- a/doc/classes/CharFXTransform.xml +++ b/doc/classes/CharFXTransform.xml @@ -17,7 +17,7 @@ The color the character will be drawn with. </member> <member name="elapsed_time" type="float" setter="set_elapsed_time" getter="get_elapsed_time" default="0.0"> - The time elapsed since the [RichTextLabel] was added to the scene tree (in seconds). Time stops when the project is paused, unless the [RichTextLabel]'s [member Node.pause_mode] is set to [constant Node.PAUSE_MODE_PROCESS]. + The time elapsed since the [RichTextLabel] was added to the scene tree (in seconds). Time stops when the project is paused depending on the value of the [RichTextLabel]'s [member Node.process_mode]. [b]Note:[/b] Time still passes while the [RichTextLabel] is hidden. </member> <member name="env" type="Dictionary" setter="set_environment" getter="get_environment" default="{}"> diff --git a/doc/classes/CheckBox.xml b/doc/classes/CheckBox.xml index bd91f9ed06..05e412e9da 100644 --- a/doc/classes/CheckBox.xml +++ b/doc/classes/CheckBox.xml @@ -24,6 +24,8 @@ <theme_item name="checked" type="Texture2D"> The check icon to display when the [CheckBox] is checked. </theme_item> + <theme_item name="checked_disabled" type="Texture2D"> + </theme_item> <theme_item name="disabled" type="StyleBox"> The [StyleBox] to display as a background when the [CheckBox] is disabled. </theme_item> @@ -45,6 +47,9 @@ <theme_item name="font_hover_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> The [CheckBox] text's font color when it's hovered and pressed. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [CheckBox]. + </theme_item> <theme_item name="font_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> The [CheckBox] text's font color when it's pressed. </theme_item> @@ -63,17 +68,26 @@ <theme_item name="normal" type="StyleBox"> The [StyleBox] to display as a background. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="pressed" type="StyleBox"> The [StyleBox] to display as a background when the [CheckBox] is pressed. </theme_item> <theme_item name="radio_checked" type="Texture2D"> If the [CheckBox] is configured as a radio button, the icon to display when the [CheckBox] is checked. </theme_item> + <theme_item name="radio_checked_disabled" type="Texture2D"> + </theme_item> <theme_item name="radio_unchecked" type="Texture2D"> If the [CheckBox] is configured as a radio button, the icon to display when the [CheckBox] is unchecked. </theme_item> + <theme_item name="radio_unchecked_disabled" type="Texture2D"> + </theme_item> <theme_item name="unchecked" type="Texture2D"> The check icon to display when the [CheckBox] is unchecked. </theme_item> + <theme_item name="unchecked_disabled" type="Texture2D"> + </theme_item> </theme_items> </class> diff --git a/doc/classes/CheckButton.xml b/doc/classes/CheckButton.xml index a05e532d4a..46e590a115 100644 --- a/doc/classes/CheckButton.xml +++ b/doc/classes/CheckButton.xml @@ -42,6 +42,9 @@ <theme_item name="font_hover_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> The [CheckButton] text's font color when it's hovered and pressed. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [CheckButton]. + </theme_item> <theme_item name="font_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> The [CheckButton] text's font color when it's pressed. </theme_item> @@ -84,6 +87,9 @@ <theme_item name="on_mirrored" type="Texture2D"> The icon to display when the [CheckButton] is checked (for right-to-left layouts). </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="pressed" type="StyleBox"> The [StyleBox] to display as a background when the [CheckButton] is pressed. </theme_item> diff --git a/doc/classes/ClippedCamera3D.xml b/doc/classes/ClippedCamera3D.xml index de90247536..9116af19c3 100644 --- a/doc/classes/ClippedCamera3D.xml +++ b/doc/classes/ClippedCamera3D.xml @@ -95,15 +95,15 @@ <member name="margin" type="float" setter="set_margin" getter="get_margin" default="0.0"> The camera's collision margin. The camera can't get closer than this distance to a colliding object. </member> - <member name="process_mode" type="int" setter="set_process_mode" getter="get_process_mode" enum="ClippedCamera3D.ProcessMode" default="0"> - The camera's process callback. See [enum ProcessMode]. + <member name="process_callback" type="int" setter="set_process_callback" getter="get_process_callback" enum="ClippedCamera3D.ClipProcessCallback" default="0"> + The camera's process callback. See [enum ClipProcessCallback]. </member> </members> <constants> - <constant name="CLIP_PROCESS_PHYSICS" value="0" enum="ProcessMode"> + <constant name="CLIP_PROCESS_PHYSICS" value="0" enum="ClipProcessCallback"> The camera updates with the [code]_physics_process[/code] callback. </constant> - <constant name="CLIP_PROCESS_IDLE" value="1" enum="ProcessMode"> + <constant name="CLIP_PROCESS_IDLE" value="1" enum="ClipProcessCallback"> The camera updates with the [code]_process[/code] callback. </constant> </constants> diff --git a/doc/classes/CodeEdit.xml b/doc/classes/CodeEdit.xml index f897f2405b..81795abcdd 100644 --- a/doc/classes/CodeEdit.xml +++ b/doc/classes/CodeEdit.xml @@ -3,7 +3,7 @@ <brief_description> </brief_description> <description> - [b]Note[/b]: By default [CodeEdit] always use left-to-right text direction to correcly display source code. + [b]Note[/b]: By default [CodeEdit] always use left-to-right text direction to correctly display source code. </description> <tutorials> </tutorials> @@ -179,6 +179,9 @@ </theme_item> <theme_item name="font_color" type="Color" default="Color( 0.88, 0.88, 0.88, 1 )"> </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [CodeEdit]. + </theme_item> <theme_item name="font_readonly_color" type="Color" default="Color( 0.88, 0.88, 0.88, 0.5 )"> </theme_item> <theme_item name="font_selected_color" type="Color" default="Color( 0, 0, 0, 1 )"> @@ -194,6 +197,9 @@ </theme_item> <theme_item name="normal" type="StyleBox"> </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="read_only" type="StyleBox"> </theme_item> <theme_item name="safe_line_number_color" type="Color" default="Color( 0.67, 0.78, 0.67, 0.6 )"> diff --git a/doc/classes/CodeHighlighter.xml b/doc/classes/CodeHighlighter.xml index 7a1dad547b..f078e4e5b0 100644 --- a/doc/classes/CodeHighlighter.xml +++ b/doc/classes/CodeHighlighter.xml @@ -1,8 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CodeHighlighter" inherits="SyntaxHighlighter" version="4.0"> <brief_description> + A syntax highlighter for code. </brief_description> <description> + A syntax highlighter for code. </description> <tutorials> </tutorials> @@ -10,15 +12,18 @@ <method name="add_color_region"> <return type="void"> </return> - <argument index="0" name="p_start_key" type="String"> + <argument index="0" name="start_key" type="String"> </argument> - <argument index="1" name="p_end_key" type="String"> + <argument index="1" name="end_key" type="String"> </argument> - <argument index="2" name="p_color" type="Color"> + <argument index="2" name="color" type="Color"> </argument> - <argument index="3" name="p_line_only" type="bool" default="false"> + <argument index="3" name="line_only" type="bool" default="false"> </argument> <description> + Adds a color region such as comments or strings. + Both the start and end keys must be symbols. Only the start key has to be unique. + Line only denotes if the region should continue until the end of the line or carry over on to the next line. If the end key is blank this is automatically set to [code]true[/code]. </description> </method> <method name="add_keyword_color"> @@ -29,6 +34,8 @@ <argument index="1" name="color" type="Color"> </argument> <description> + Sets the color for a keyword. + The keyword cannot contain any symbols except '_'. </description> </method> <method name="add_member_keyword_color"> @@ -39,24 +46,30 @@ <argument index="1" name="color" type="Color"> </argument> <description> + Sets the color for a member keyword. + The member keyword cannot contain any symbols except '_'. + It will not be highlighted if preceded by a '.'. </description> </method> <method name="clear_color_regions"> <return type="void"> </return> <description> + Removes all color regions. </description> </method> <method name="clear_keyword_colors"> <return type="void"> </return> <description> + Removes all keywords. </description> </method> <method name="clear_member_keyword_colors"> <return type="void"> </return> <description> + Removes all member keywords. </description> </method> <method name="get_keyword_color" qualifiers="const"> @@ -65,6 +78,7 @@ <argument index="0" name="keyword" type="String"> </argument> <description> + Returns the color for a keyword. </description> </method> <method name="get_member_keyword_color" qualifiers="const"> @@ -73,14 +87,16 @@ <argument index="0" name="member_keyword" type="String"> </argument> <description> + Returns the color for a member keyword. </description> </method> <method name="has_color_region" qualifiers="const"> <return type="bool"> </return> - <argument index="0" name="p_start_key" type="String"> + <argument index="0" name="start_key" type="String"> </argument> <description> + Return [code]true[/code] if the start key exists, else [code]false[/code]. </description> </method> <method name="has_keyword_color" qualifiers="const"> @@ -89,6 +105,7 @@ <argument index="0" name="keyword" type="String"> </argument> <description> + Return [code]true[/code] if the keyword exists, else [code]false[/code]. </description> </method> <method name="has_member_keyword_color" qualifiers="const"> @@ -97,14 +114,16 @@ <argument index="0" name="member_keyword" type="String"> </argument> <description> + Return [code]true[/code] if the member keyword exists, else [code]false[/code]. </description> </method> <method name="remove_color_region"> <return type="void"> </return> - <argument index="0" name="p_start_key" type="String"> + <argument index="0" name="start_key" type="String"> </argument> <description> + Removes the color region that uses that start key. </description> </method> <method name="remove_keyword_color"> @@ -113,6 +132,7 @@ <argument index="0" name="keyword" type="String"> </argument> <description> + Removes the keyword. </description> </method> <method name="remove_member_keyword_color"> @@ -121,23 +141,31 @@ <argument index="0" name="member_keyword" type="String"> </argument> <description> + Removes the member keyword. </description> </method> </methods> <members> <member name="color_regions" type="Dictionary" setter="set_color_regions" getter="get_color_regions" default="{}"> + Sets the color regions. All existing regions will be removed. The [Dictionary] key is the region start and end key, separated by a space. The value is the region color. </member> <member name="function_color" type="Color" setter="set_function_color" getter="get_function_color" default="Color( 0, 0, 0, 1 )"> + Sets color for functions. A function is a non-keyword string followed by a '('. </member> <member name="keyword_colors" type="Dictionary" setter="set_keyword_colors" getter="get_keyword_colors" default="{}"> + Sets the keyword colors. All existing keywords will be removed. The [Dictionary] key is the keyword. The value is the keyword color. </member> <member name="member_keyword_colors" type="Dictionary" setter="set_member_keyword_colors" getter="get_member_keyword_colors" default="{}"> + Sets the member keyword colors. All existing member keyword will be removed. The [Dictionary] key is the member keyword. The value is the member keyword color. </member> <member name="member_variable_color" type="Color" setter="set_member_variable_color" getter="get_member_variable_color" default="Color( 0, 0, 0, 1 )"> + Sets color for member variables. A member variable is non-keyword, non-function string proceeded with a '.'. </member> <member name="number_color" type="Color" setter="set_number_color" getter="get_number_color" default="Color( 0, 0, 0, 1 )"> + Sets the color for numbers. </member> <member name="symbol_color" type="Color" setter="set_symbol_color" getter="get_symbol_color" default="Color( 0, 0, 0, 1 )"> + Sets the color for symbols. </member> </members> <constants> diff --git a/doc/classes/CollisionPolygon3D.xml b/doc/classes/CollisionPolygon3D.xml index dd3c57d1d0..38f4c5fe5c 100644 --- a/doc/classes/CollisionPolygon3D.xml +++ b/doc/classes/CollisionPolygon3D.xml @@ -17,6 +17,9 @@ <member name="disabled" type="bool" setter="set_disabled" getter="is_disabled" default="false"> If [code]true[/code], no collision will be produced. </member> + <member name="margin" type="float" setter="set_margin" getter="get_margin" default="0.04"> + The collision margin for the generated [Shape3D]. See [member Shape3D.margin] for more details. + </member> <member name="polygon" type="PackedVector2Array" setter="set_polygon" getter="get_polygon" default="PackedVector2Array( )"> Array of vertices which define the polygon. [b]Note:[/b] The returned value is a copy of the original. Methods which mutate the size or properties of the return value will not impact the original polygon. To change properties of the polygon, assign it to a temporary variable and make changes before reassigning the [code]polygon[/code] member. diff --git a/doc/classes/Color.xml b/doc/classes/Color.xml index 8af5f29b65..c33d007735 100644 --- a/doc/classes/Color.xml +++ b/doc/classes/Color.xml @@ -5,7 +5,7 @@ </brief_description> <description> A color represented by red, green, blue, and alpha (RGBA) components. The alpha component is often used for transparency. Values are in floating-point and usually range from 0 to 1. Some properties (such as CanvasItem.modulate) may accept values greater than 1 (overbright or HDR colors). - You can also create a color from standardized color names by using [code]ColorN[/code] ([b]FIXME:[/b] No longer true, a Color(String) constructor should be re-implemented for that) or directly using the color constants defined here. The standardized color set is based on the [url=https://en.wikipedia.org/wiki/X11_color_names]X11 color names[/url]. + You can also create a color from standardized color names by using the string constructor or directly using the color constants defined here. The standardized color set is based on the [url=https://en.wikipedia.org/wiki/X11_color_names]X11 color names[/url]. If you want to supply values in a range of 0 to 255, you should use [method @GDScript.Color8]. [b]Note:[/b] In a boolean context, a Color will evaluate to [code]false[/code] if it's equal to [code]Color(0, 0, 0, 1)[/code] (opaque black). Otherwise, a Color will always evaluate to [code]true[/code]. [url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/color_constants.png]Color constants cheatsheet[/url] @@ -54,22 +54,40 @@ <method name="Color" qualifiers="constructor"> <return type="Color"> </return> + <argument index="0" name="code" type="String"> + </argument> + <description> + Constructs a [Color] either from an HTML color code or from a standardized color name. Supported color names are the same as the constants. + </description> + </method> + <method name="Color" qualifiers="constructor"> + <return type="Color"> + </return> + <argument index="0" name="code" type="String"> + </argument> + <argument index="1" name="alpha" type="float"> + </argument> + <description> + Constructs a [Color] either from an HTML color code or from a standardized color name, with [code]alpha[/code] on the range of 0 to 1. Supported color names are the same as the constants. + </description> + </method> + <method name="Color" qualifiers="constructor"> + <return type="Color"> + </return> <argument index="0" name="r" type="float"> </argument> <argument index="1" name="g" type="float"> </argument> <argument index="2" name="b" type="float"> </argument> - <argument index="3" name="a" type="float"> - </argument> <description> - Constructs a [Color] from RGBA values, typically between 0 and 1. + Constructs a [Color] from RGB values, typically between 0 and 1. Alpha will be 1. [codeblocks] [gdscript] - var color = Color(0.2, 1.0, 0.7, 0.8) # Similar to `Color8(51, 255, 178, 204)` + var color = Color(0.2, 1.0, 0.7) # Similar to `Color8(51, 255, 178, 255)` [/gdscript] [csharp] - var color = new Color(0.2f, 1.0f, 0.7f, 0.8f); // Similar to `Color.Color8(51, 255, 178, 255, 204)` + var color = new Color(0.2f, 1.0f, 0.7f); // Similar to `Color.Color8(51, 255, 178, 255)` [/csharp] [/codeblocks] </description> @@ -83,19 +101,21 @@ </argument> <argument index="2" name="b" type="float"> </argument> + <argument index="3" name="a" type="float"> + </argument> <description> - Constructs a [Color] from RGB values, typically between 0 and 1. Alpha will be 1. + Constructs a [Color] from RGBA values, typically between 0 and 1. [codeblocks] [gdscript] - var color = Color(0.2, 1.0, 0.7) # Similar to `Color8(51, 255, 178, 255)` + var color = Color(0.2, 1.0, 0.7, 0.8) # Similar to `Color8(51, 255, 178, 204)` [/gdscript] [csharp] - var color = new Color(0.2f, 1.0f, 0.7f); // Similar to `Color.Color8(51, 255, 178, 255)` + var color = new Color(0.2f, 1.0f, 0.7f, 0.8f); // Similar to `Color.Color8(51, 255, 178, 255, 204)` [/csharp] [/codeblocks] </description> </method> - <method name="blend"> + <method name="blend" qualifiers="const"> <return type="Color"> </return> <argument index="0" name="over" type="Color"> @@ -116,7 +136,7 @@ [/codeblocks] </description> </method> - <method name="darkened"> + <method name="darkened" qualifiers="const"> <return type="Color"> </return> <argument index="0" name="amount" type="float"> @@ -135,7 +155,87 @@ [/codeblocks] </description> </method> - <method name="inverted"> + <method name="find_named_color" qualifiers="static"> + <return type="int"> + </return> + <argument index="0" name="name" type="String"> + </argument> + <description> + </description> + </method> + <method name="from_rgbe9995" qualifiers="static"> + <return type="Color"> + </return> + <argument index="0" name="rgbe" type="int"> + </argument> + <description> + </description> + </method> + <method name="from_string" qualifiers="static"> + <return type="Color"> + </return> + <argument index="0" name="str" type="String"> + </argument> + <argument index="1" name="default" type="Color"> + </argument> + <description> + </description> + </method> + <method name="get_named_color" qualifiers="static"> + <return type="Color"> + </return> + <argument index="0" name="idx" type="int"> + </argument> + <description> + </description> + </method> + <method name="get_named_color_count" qualifiers="static"> + <return type="int"> + </return> + <description> + </description> + </method> + <method name="get_named_color_name" qualifiers="static"> + <return type="String"> + </return> + <argument index="0" name="idx" type="int"> + </argument> + <description> + </description> + </method> + <method name="hex" qualifiers="static"> + <return type="Color"> + </return> + <argument index="0" name="hex" type="int"> + </argument> + <description> + </description> + </method> + <method name="hex64" qualifiers="static"> + <return type="Color"> + </return> + <argument index="0" name="hex" type="int"> + </argument> + <description> + </description> + </method> + <method name="html" qualifiers="static"> + <return type="Color"> + </return> + <argument index="0" name="rgba" type="String"> + </argument> + <description> + </description> + </method> + <method name="html_is_valid" qualifiers="static"> + <return type="bool"> + </return> + <argument index="0" name="color" type="String"> + </argument> + <description> + </description> + </method> + <method name="inverted" qualifiers="const"> <return type="Color"> </return> <description> @@ -152,7 +252,7 @@ [/codeblocks] </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="to" type="Color"> @@ -161,7 +261,7 @@ Returns [code]true[/code] if this color and [code]color[/code] are approximately equal, by running [method @GlobalScope.is_equal_approx] on each component. </description> </method> - <method name="lerp"> + <method name="lerp" qualifiers="const"> <return type="Color"> </return> <argument index="0" name="to" type="Color"> @@ -184,7 +284,7 @@ [/codeblocks] </description> </method> - <method name="lightened"> + <method name="lightened" qualifiers="const"> <return type="Color"> </return> <argument index="0" name="amount" type="float"> @@ -303,7 +403,7 @@ <description> </description> </method> - <method name="to_abgr32"> + <method name="to_abgr32" qualifiers="const"> <return type="int"> </return> <description> @@ -320,7 +420,7 @@ [/codeblocks] </description> </method> - <method name="to_abgr64"> + <method name="to_abgr64" qualifiers="const"> <return type="int"> </return> <description> @@ -337,7 +437,7 @@ [/codeblocks] </description> </method> - <method name="to_argb32"> + <method name="to_argb32" qualifiers="const"> <return type="int"> </return> <description> @@ -354,7 +454,7 @@ [/codeblocks] </description> </method> - <method name="to_argb64"> + <method name="to_argb64" qualifiers="const"> <return type="int"> </return> <description> @@ -371,7 +471,7 @@ [/codeblocks] </description> </method> - <method name="to_html"> + <method name="to_html" qualifiers="const"> <return type="String"> </return> <argument index="0" name="with_alpha" type="bool" default="true"> @@ -393,7 +493,7 @@ [/codeblocks] </description> </method> - <method name="to_rgba32"> + <method name="to_rgba32" qualifiers="const"> <return type="int"> </return> <description> @@ -410,7 +510,7 @@ [/codeblocks] </description> </method> - <method name="to_rgba64"> + <method name="to_rgba64" qualifiers="const"> <return type="int"> </return> <description> diff --git a/doc/classes/ColorPicker.xml b/doc/classes/ColorPicker.xml index aea3542867..2fc4313e47 100644 --- a/doc/classes/ColorPicker.xml +++ b/doc/classes/ColorPicker.xml @@ -91,6 +91,9 @@ <theme_item name="add_preset" type="Texture2D"> The icon for the "Add Preset" button. </theme_item> + <theme_item name="bar_arrow" type="Texture2D"> + The texture for the arrow grabber. + </theme_item> <theme_item name="color_hue" type="Texture2D"> Custom texture for the hue selection slider on the right. </theme_item> diff --git a/doc/classes/ColorPickerButton.xml b/doc/classes/ColorPickerButton.xml index b351faf9ca..e49027e61d 100644 --- a/doc/classes/ColorPickerButton.xml +++ b/doc/classes/ColorPickerButton.xml @@ -79,6 +79,9 @@ <theme_item name="font_hover_color" type="Color" default="Color( 1, 1, 1, 1 )"> Text [Color] used when the [ColorPickerButton] is being hovered. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [ColorPickerButton]. + </theme_item> <theme_item name="font_pressed_color" type="Color" default="Color( 0.8, 0.8, 0.8, 1 )"> Text [Color] used when the [ColorPickerButton] is being pressed. </theme_item> @@ -94,6 +97,9 @@ <theme_item name="normal" type="StyleBox"> Default [StyleBox] for the [ColorPickerButton]. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="pressed" type="StyleBox"> [StyleBox] used when the [ColorPickerButton] is being pressed. </theme_item> diff --git a/doc/classes/ConcavePolygonShape3D.xml b/doc/classes/ConcavePolygonShape3D.xml index 3e83202472..a9687abedc 100644 --- a/doc/classes/ConcavePolygonShape3D.xml +++ b/doc/classes/ConcavePolygonShape3D.xml @@ -28,6 +28,11 @@ </description> </method> </methods> + <members> + <member name="backface_collision" type="bool" setter="set_backface_collision_enabled" getter="is_backface_collision_enabled" default="false"> + If set to [code]true[/code], collisions occur on both sides of the concave shape faces. Otherwise they occur only along the face normals. + </member> + </members> <constants> </constants> </class> diff --git a/doc/classes/ConfigFile.xml b/doc/classes/ConfigFile.xml index da17d993e3..38948a2d6e 100644 --- a/doc/classes/ConfigFile.xml +++ b/doc/classes/ConfigFile.xml @@ -49,6 +49,12 @@ <tutorials> </tutorials> <methods> + <method name="clear"> + <return type="void"> + </return> + <description> + </description> + </method> <method name="erase_section"> <return type="void"> </return> @@ -158,7 +164,7 @@ <argument index="0" name="data" type="String"> </argument> <description> - Parses the the passed string as the contents of a config file. The string is parsed and loaded in the ConfigFile object which the method was called on. + Parses the passed string as the contents of a config file. The string is parsed and loaded in the ConfigFile object which the method was called on. Returns one of the [enum Error] code constants ([code]OK[/code] on success). </description> </method> diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index d94e495a5e..c0f918a01f 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -16,8 +16,9 @@ [b]Note:[/b] Theme items are [i]not[/i] [Object] properties. This means you can't access their values using [method Object.get] and [method Object.set]. Instead, use the [code]get_theme_*[/code] and [code]add_theme_*_override[/code] methods provided by this class. </description> <tutorials> - <link title="GUI tutorial index">https://docs.godotengine.org/en/latest/tutorials/gui/index.html</link> + <link title="GUI tutorial index">https://docs.godotengine.org/en/latest/tutorials/ui/index.html</link> <link title="Custom drawing in 2D">https://docs.godotengine.org/en/latest/tutorials/2d/custom_drawing_in_2d.html</link> + <link title="Control node gallery">https://docs.godotengine.org/en/latest/tutorials/ui/control_node_gallery.html</link> <link title="All GUI Demos">https://github.com/godotengine/godot-demo-projects/tree/master/gui</link> </tutorials> <methods> @@ -49,7 +50,7 @@ [gdscript] func _gui_input(event): if event is InputEventMouseButton: - if event.button_index == BUTTON_LEFT and event.pressed: + if event.button_index == MOUSE_BUTTON_LEFT and event.pressed: print("I've been clicked D:") [/gdscript] [csharp] @@ -149,7 +150,6 @@ </argument> <description> Overrides the [Color] with given [code]name[/code] in the [member theme] resource the control uses. - [b]Note:[/b] Unlike other theme overrides, there is no way to undo a color override without manually assigning the previous color. [b]Example of overriding a label's color and resetting it later:[/b] [codeblocks] [gdscript] @@ -177,7 +177,7 @@ <argument index="1" name="constant" type="int"> </argument> <description> - Overrides an integer constant with given [code]name[/code] in the [member theme] resource the control uses. If the [code]constant[/code] is [code]0[/code], the override is cleared and the constant from assigned [Theme] is used. + Overrides an integer constant with given [code]name[/code] in the [member theme] resource the control uses. </description> </method> <method name="add_theme_font_override"> @@ -188,7 +188,7 @@ <argument index="1" name="font" type="Font"> </argument> <description> - Overrides the font with given [code]name[/code] in the [member theme] resource the control uses. If [code]font[/code] is [code]null[/code] or invalid, the override is cleared and the font from assigned [Theme] is used. + Overrides the font with given [code]name[/code] in the [member theme] resource the control uses. </description> </method> <method name="add_theme_font_size_override"> @@ -199,7 +199,7 @@ <argument index="1" name="font_size" type="int"> </argument> <description> - Overrides the font size with given [code]name[/code] in the [member theme] resource the control uses. If [code]font_size[/code] is [code]-1[/code], the override is cleared and the font size from assigned [Theme] is used. + Overrides the font size with given [code]name[/code] in the [member theme] resource the control uses. </description> </method> <method name="add_theme_icon_override"> @@ -210,7 +210,7 @@ <argument index="1" name="texture" type="Texture2D"> </argument> <description> - Overrides the icon with given [code]name[/code] in the [member theme] resource the control uses. If [code]icon[/code] is [code]null[/code] or invalid, the override is cleared and the icon from assigned [Theme] is used. + Overrides the icon with given [code]name[/code] in the [member theme] resource the control uses. </description> </method> <method name="add_theme_stylebox_override"> @@ -221,7 +221,7 @@ <argument index="1" name="stylebox" type="StyleBox"> </argument> <description> - Overrides the [StyleBox] with given [code]name[/code] in the [member theme] resource the control uses. If [code]stylebox[/code] is empty or invalid, the override is cleared and the [StyleBox] from assigned [Theme] is used. + Overrides the [StyleBox] with given [code]name[/code] in the [member theme] resource the control uses. [b]Example of modifying a property in a StyleBox by duplicating it:[/b] [codeblocks] [gdscript] @@ -729,6 +729,60 @@ Give up the focus. No other control will be able to receive keyboard input. </description> </method> + <method name="remove_theme_color_override"> + <return type="void"> + </return> + <argument index="0" name="name" type="StringName"> + </argument> + <description> + Removes a theme override for a [Color] with the given [code]name[/code]. + </description> + </method> + <method name="remove_theme_constant_override"> + <return type="void"> + </return> + <argument index="0" name="name" type="StringName"> + </argument> + <description> + Removes a theme override for a constant with the given [code]name[/code]. + </description> + </method> + <method name="remove_theme_font_override"> + <return type="void"> + </return> + <argument index="0" name="name" type="StringName"> + </argument> + <description> + Removes a theme override for a [Font] with the given [code]name[/code]. + </description> + </method> + <method name="remove_theme_font_size_override"> + <return type="void"> + </return> + <argument index="0" name="name" type="StringName"> + </argument> + <description> + Removes a theme override for a font size with the given [code]name[/code]. + </description> + </method> + <method name="remove_theme_icon_override"> + <return type="void"> + </return> + <argument index="0" name="name" type="StringName"> + </argument> + <description> + Removes a theme override for an icon with the given [code]name[/code]. + </description> + </method> + <method name="remove_theme_stylebox_override"> + <return type="void"> + </return> + <argument index="0" name="name" type="StringName"> + </argument> + <description> + Removes a theme override for a [StyleBox] with the given [code]name[/code]. + </description> + </method> <method name="set_anchor"> <return type="void"> </return> @@ -868,7 +922,7 @@ <argument index="0" name="control" type="Control"> </argument> <description> - Shows the given control at the mouse pointer. A good time to call this method is in [method get_drag_data]. The control must not be in the scene tree. + Shows the given control at the mouse pointer. A good time to call this method is in [method get_drag_data]. The control must not be in the scene tree. You should not free the control, and you should not keep a reference to the control beyond the duration of the drag. It will be deleted automatically after the drag has ended. [codeblocks] [gdscript] export (Color, RGBA) var color = Color(1, 0, 0, 1) diff --git a/doc/classes/CryptoKey.xml b/doc/classes/CryptoKey.xml index 410c2262f9..26b3087b21 100644 --- a/doc/classes/CryptoKey.xml +++ b/doc/classes/CryptoKey.xml @@ -27,7 +27,7 @@ </argument> <description> Loads a key from [code]path[/code]. If [code]public_only[/code] is [code]true[/code], only the public key will be loaded. - [b]Note[/b]: [code]path[/code] should should be a "*.pub" file if [code]public_only[/code] is [code]true[/code], a "*.key" file otherwise. + [b]Note[/b]: [code]path[/code] should be a "*.pub" file if [code]public_only[/code] is [code]true[/code], a "*.key" file otherwise. </description> </method> <method name="load_from_string"> @@ -50,7 +50,7 @@ </argument> <description> Saves a key to the given [code]path[/code]. If [code]public_only[/code] is [code]true[/code], only the public key will be saved. - [b]Note[/b]: [code]path[/code] should should be a "*.pub" file if [code]public_only[/code] is [code]true[/code], a "*.key" file otherwise. + [b]Note[/b]: [code]path[/code] should be a "*.pub" file if [code]public_only[/code] is [code]true[/code], a "*.key" file otherwise. </description> </method> <method name="save_to_string"> diff --git a/doc/classes/Curve2D.xml b/doc/classes/Curve2D.xml index 2d50d98a74..b33f3b4ffc 100644 --- a/doc/classes/Curve2D.xml +++ b/doc/classes/Curve2D.xml @@ -63,7 +63,7 @@ <argument index="0" name="to_point" type="Vector2"> </argument> <description> - Returns the closest point (in curve's local space) to [code]to_point[/code]. + Returns the closest baked point (in curve's local space) to [code]to_point[/code]. [code]to_point[/code] must be in this curve's local space. </description> </method> diff --git a/doc/classes/Curve3D.xml b/doc/classes/Curve3D.xml index bda04f010b..fcd150ad57 100644 --- a/doc/classes/Curve3D.xml +++ b/doc/classes/Curve3D.xml @@ -78,7 +78,7 @@ <argument index="0" name="to_point" type="Vector3"> </argument> <description> - Returns the closest point (in curve's local space) to [code]to_point[/code]. + Returns the closest baked point (in curve's local space) to [code]to_point[/code]. [code]to_point[/code] must be in this curve's local space. </description> </method> diff --git a/doc/classes/Decal.xml b/doc/classes/Decal.xml index ca36b2400c..14c35ae6d3 100644 --- a/doc/classes/Decal.xml +++ b/doc/classes/Decal.xml @@ -6,7 +6,7 @@ <description> [Decal]s are used to project a texture onto a [Mesh] in the scene. Use Decals to add detail to a scene without affecting the underlying [Mesh]. They are often used to add weathering to building, add dirt or mud to the ground, or add variety to props. Decals can be moved at any time, making them suitable for things like blob shadows or laser sight dots. They are made of an [AABB] and a group of [Texture2D]s specifying [Color], normal, ORM (ambient occlusion, roughness, metallic), and emission. Decals are projected within their [AABB] so altering the orientation of the Decal affects the direction in which they are projected. By default, Decals are projected down (i.e. from positive Y to negative Y). - The [Texture2D]s associated with the Decal are automatically stored in a texture atlas which is used for drawing the decals so all decals can be drawn at once. Godot uses clustered decals, meaning they are stored in cluster data and drawn when the mesh is drawn, they are not drawn as a postprocessing effect after. + The [Texture2D]s associated with the Decal are automatically stored in a texture atlas which is used for drawing the decals so all decals can be drawn at once. Godot uses clustered decals, meaning they are stored in cluster data and drawn when the mesh is drawn, they are not drawn as a post-processing effect after. </description> <tutorials> </tutorials> @@ -65,7 +65,7 @@ Blends the albedo [Color] of the decal with albedo [Color] of the underlying mesh. </member> <member name="cull_mask" type="int" setter="set_cull_mask" getter="get_cull_mask" default="1048575"> - Specifies which [member VisualInstance3D.layers] this decal will project on. By default, Decals affect all layers. This is used so you can specify which types of objects receive the Decal and which do not. This is especially useful so you an ensure that dynamic objects don't accidentally receive a Decal intended for the terrain under them. + Specifies which [member VisualInstance3D.layers] this decal will project on. By default, Decals affect all layers. This is used so you can specify which types of objects receive the Decal and which do not. This is especially useful so you can ensure that dynamic objects don't accidentally receive a Decal intended for the terrain under them. </member> <member name="distance_fade_begin" type="float" setter="set_distance_fade_begin" getter="get_distance_fade_begin" default="10.0"> Distance from the camera at which the Decal begins to fade away. diff --git a/doc/classes/Dictionary.xml b/doc/classes/Dictionary.xml index d3fcbc9f64..16c4348994 100644 --- a/doc/classes/Dictionary.xml +++ b/doc/classes/Dictionary.xml @@ -4,7 +4,7 @@ Dictionary type. </brief_description> <description> - Dictionary type. Associative container which contains values referenced by unique keys. Dictionaries are composed of pairs of keys (which must be unique) and values. Dictionaries will preserve the insertion order when adding elements, even though this may not be reflected when printing the dictionary. In other programming languages, this data structure is sometimes referred to as an hash map or associative array. + Dictionary type. Associative container which contains values referenced by unique keys. Dictionaries are composed of pairs of keys (which must be unique) and values. Dictionaries will preserve the insertion order when adding elements, even though this may not be reflected when printing the dictionary. In other programming languages, this data structure is sometimes referred to as a hash map or associative array. You can define a dictionary by placing a comma-separated list of [code]key: value[/code] pairs in curly braces [code]{}[/code]. Erasing elements while iterating over them [b]is not supported[/b] and will result in undefined behavior. [b]Note:[/b] Dictionaries are always passed by reference. To get a copy of a dictionary which can be modified independently of the original dictionary, use [method duplicate]. @@ -206,7 +206,7 @@ Clear the dictionary, removing all key/value pairs. </description> </method> - <method name="duplicate"> + <method name="duplicate" qualifiers="const"> <return type="Dictionary"> </return> <argument index="0" name="deep" type="bool" default="false"> @@ -224,7 +224,7 @@ Erase a dictionary key/value pair by key. Returns [code]true[/code] if the given key was present in the dictionary, [code]false[/code] otherwise. Does not erase elements while iterating over the dictionary. </description> </method> - <method name="get"> + <method name="get" qualifiers="const"> <return type="Variant"> </return> <argument index="0" name="key" type="Variant"> @@ -235,7 +235,7 @@ Returns the current value for the specified key in the [Dictionary]. If the key does not exist, the method returns the value of the optional default argument, or [code]null[/code] if it is omitted. </description> </method> - <method name="has"> + <method name="has" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="key" type="Variant"> @@ -260,16 +260,16 @@ This method (like the [code]in[/code] operator) will evaluate to [code]true[/code] as long as the key exists, even if the associated value is [code]null[/code]. </description> </method> - <method name="has_all"> + <method name="has_all" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="keys" type="Array"> </argument> <description> - Returns [code]true[/code] if the dictionary has all of the keys in the given array. + Returns [code]true[/code] if the dictionary has all the keys in the given array. </description> </method> - <method name="hash"> + <method name="hash" qualifiers="const"> <return type="int"> </return> <description> @@ -292,14 +292,14 @@ [b]Note:[/b] Dictionaries with the same keys/values but in a different order will have a different hash. </description> </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the dictionary is empty. </description> </method> - <method name="keys"> + <method name="keys" qualifiers="const"> <return type="Array"> </return> <description> @@ -330,14 +330,14 @@ <description> </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> Returns the number of keys in the dictionary. </description> </method> - <method name="values"> + <method name="values" qualifiers="const"> <return type="Array"> </return> <description> diff --git a/doc/classes/Directory.xml b/doc/classes/Directory.xml index 2d7292717d..a9d7960501 100644 --- a/doc/classes/Directory.xml +++ b/doc/classes/Directory.xml @@ -6,6 +6,7 @@ <description> Directory type. It is used to manage directories and their content (not restricted to the project folder). When creating a new [Directory], it must be explicitly opened using [method open] before most methods can be used. However, [method file_exists] and [method dir_exists] can be used without opening a directory. If so, they use a path relative to [code]res://[/code]. + [b]Note:[/b] Many resources types are imported (e.g. textures or sound files), and their source asset will not be included in the exported game, as only the imported version is used. Use [ResourceLoader] to access imported resources. Here is an example on how to iterate through the files of a directory: [codeblocks] [gdscript] @@ -125,7 +126,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - On Windows, returns the name of the drive (partition) passed as an argument (e.g. [code]C:[/code]). On other platforms, or if the requested drive does not existed, the method returns an empty String. + On Windows, returns the name of the drive (partition) passed as an argument (e.g. [code]C:[/code]). On other platforms, or if the requested drive does not exist, the method returns an empty String. </description> </method> <method name="get_drive_count"> @@ -167,7 +168,7 @@ <return type="void"> </return> <description> - Closes the current stream opened with [method list_dir_begin] (whether it has been fully processed with [method get_next] or not does not matter). + Closes the current stream opened with [method list_dir_begin] (whether it has been fully processed with [method get_next] does not matter). </description> </method> <method name="make_dir"> diff --git a/doc/classes/DisplayServer.xml b/doc/classes/DisplayServer.xml index d91ea6528a..91e90d051d 100644 --- a/doc/classes/DisplayServer.xml +++ b/doc/classes/DisplayServer.xml @@ -492,7 +492,7 @@ </argument> <argument index="3" name="subtitle_track" type="String"> </argument> - <argument index="4" name="arg4" type="int"> + <argument index="4" name="screen" type="int"> </argument> <description> </description> @@ -635,6 +635,42 @@ <description> </description> </method> + <method name="tablet_get_current_driver" qualifiers="const"> + <return type="String"> + </return> + <description> + Returns current active tablet driver name. + [b]Note:[/b] This method is implemented on Windows. + </description> + </method> + <method name="tablet_get_driver_count" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the total number of available tablet drivers. + [b]Note:[/b] This method is implemented on Windows. + </description> + </method> + <method name="tablet_get_driver_name" qualifiers="const"> + <return type="String"> + </return> + <argument index="0" name="idx" type="int"> + </argument> + <description> + Returns the tablet driver name for the given index. + [b]Note:[/b] This method is implemented on Windows. + </description> + </method> + <method name="tablet_set_current_driver"> + <return type="void"> + </return> + <argument index="0" name="name" type="String"> + </argument> + <description> + Set active tablet driver name. + [b]Note:[/b] This method is implemented on Windows. + </description> + </method> <method name="virtual_keyboard_get_height" qualifiers="const"> <return type="int"> </return> diff --git a/doc/classes/EditorFileSystem.xml b/doc/classes/EditorFileSystem.xml index 5461dccd27..3a045817c2 100644 --- a/doc/classes/EditorFileSystem.xml +++ b/doc/classes/EditorFileSystem.xml @@ -90,7 +90,7 @@ <argument index="0" name="resources" type="PackedStringArray"> </argument> <description> - Remitted if a resource is reimported. + Emitted if a resource is reimported. </description> </signal> <signal name="resources_reload"> diff --git a/doc/classes/EditorImportPlugin.xml b/doc/classes/EditorImportPlugin.xml index e5401134bf..aa64ab4043 100644 --- a/doc/classes/EditorImportPlugin.xml +++ b/doc/classes/EditorImportPlugin.xml @@ -16,7 +16,7 @@ return "my.special.plugin" func get_visible_name(): - return "Special Mesh Importer" + return "Special Mesh" func get_recognized_extensions(): return ["special", "spec"] @@ -44,8 +44,7 @@ # Fill the Mesh with data read in "file", left as an exercise to the reader. var filename = save_path + "." + get_save_extension() - ResourceSaver.save(filename, mesh) - return OK + return ResourceSaver.save(filename, mesh) [/gdscript] [csharp] using Godot; @@ -60,7 +59,7 @@ public override String GetVisibleName() { - return "Special Mesh Importer"; + return "Special Mesh"; } public override Godot.Collections.Array GetRecognizedExtensions() @@ -104,8 +103,7 @@ var mesh = new ArrayMesh(); // Fill the Mesh with data read in "file", left as an exercise to the reader. String filename = savePath + "." + GetSaveExtension(); - ResourceSaver.Save(filename, mesh); - return (int)Error.Ok; + return (int)ResourceSaver.Save(filename, mesh); } } [/csharp] @@ -220,7 +218,7 @@ <return type="String"> </return> <description> - Gets the name to display in the import window. + Gets the name to display in the import window. You should choose this name as a continuation to "Import as", e.g. "Import as Special Mesh". </description> </method> <method name="import" qualifiers="virtual"> diff --git a/doc/classes/EditorInspector.xml b/doc/classes/EditorInspector.xml index 6f03165a97..d85f95baff 100644 --- a/doc/classes/EditorInspector.xml +++ b/doc/classes/EditorInspector.xml @@ -10,14 +10,6 @@ <tutorials> </tutorials> <methods> - <method name="refresh"> - <return type="void"> - </return> - <description> - Refreshes the inspector. - [b]Note:[/b] To save on CPU resources, calling this method will do nothing if the time specified in [code]docks/property_editor/auto_refresh_interval[/code] editor setting hasn't passed yet since this method was last called. (By default, this interval is set to 0.3 seconds.) - </description> - </method> </methods> <members> <member name="scroll_horizontal_enabled" type="bool" setter="set_enable_h_scroll" getter="is_h_scroll_enabled" override="true" default="false" /> diff --git a/doc/classes/EditorInspectorPlugin.xml b/doc/classes/EditorInspectorPlugin.xml index 3cc624f49b..8204dc931e 100644 --- a/doc/classes/EditorInspectorPlugin.xml +++ b/doc/classes/EditorInspectorPlugin.xml @@ -4,12 +4,12 @@ Plugin for adding custom property editors on inspector. </brief_description> <description> - This plugins allows adding custom property editors to [EditorInspector]. + These plugins allow adding custom property editors to [EditorInspector]. Plugins are registered via [method EditorPlugin.add_inspector_plugin]. When an object is edited, the [method can_handle] function is called and must return [code]true[/code] if the object type is supported. If supported, the function [method parse_begin] will be called, allowing to place custom controls at the beginning of the class. Subsequently, the [method parse_category] and [method parse_property] are called for every category and property. They offer the ability to add custom controls to the inspector too. - Finally [method parse_end] will be called. + Finally, [method parse_end] will be called. On each of these calls, the "add" functions can be called. </description> <tutorials> diff --git a/doc/classes/EditorInterface.xml b/doc/classes/EditorInterface.xml index b01af71852..4d0e11fb19 100644 --- a/doc/classes/EditorInterface.xml +++ b/doc/classes/EditorInterface.xml @@ -48,6 +48,14 @@ [b]Note:[/b] This returns the main editor control containing the whole editor, not the 2D or 3D viewports specifically. </description> </method> + <method name="get_editor_scale" qualifiers="const"> + <return type="float"> + </return> + <description> + Returns the actual scale of the editor UI ([code]1.0[/code] being 100% scale). This can be used to adjust position and dimensions of the UI added by plugins. + [b]Note:[/b] This value is set via the [code]interface/editor/display_scale[/code] and [code]interface/editor/custom_display_scale[/code] editor settings. Editor must be restarted for changes to be properly applied. + </description> + </method> <method name="get_editor_settings"> <return type="EditorSettings"> </return> diff --git a/doc/classes/EditorNode3DGizmoPlugin.xml b/doc/classes/EditorNode3DGizmoPlugin.xml index 322cff4e43..34657a1c08 100644 --- a/doc/classes/EditorNode3DGizmoPlugin.xml +++ b/doc/classes/EditorNode3DGizmoPlugin.xml @@ -98,6 +98,13 @@ Creates an unshaded material with its variants (selected and/or editable) and adds them to the internal material list. They can then be accessed with [method get_material] and used in [method EditorNode3DGizmo.add_mesh] and [method EditorNode3DGizmo.add_lines]. Should not be overridden. </description> </method> + <method name="get_gizmo_name" qualifiers="virtual"> + <return type="String"> + </return> + <description> + Override this method to provide the name that will appear in the gizmo visibility menu. + </description> + </method> <method name="get_handle_name" qualifiers="virtual"> <return type="String"> </return> @@ -131,13 +138,6 @@ Gets material from the internal list of materials. If an [EditorNode3DGizmo] is provided, it will try to get the corresponding variant (selected and/or editable). </description> </method> - <method name="get_name" qualifiers="virtual"> - <return type="String"> - </return> - <description> - Override this method to provide the name that will appear in the gizmo visibility menu. - </description> - </method> <method name="get_priority" qualifiers="virtual"> <return type="int"> </return> @@ -170,7 +170,7 @@ <return type="bool"> </return> <description> - Override this method to define whether Node3D with this gizmo should be selecteble even when the gizmo is hidden. + Override this method to define whether Node3D with this gizmo should be selectable even when the gizmo is hidden. </description> </method> <method name="redraw" qualifiers="virtual"> diff --git a/doc/classes/EditorPlugin.xml b/doc/classes/EditorPlugin.xml index be21ad65c5..8dcffb0b74 100644 --- a/doc/classes/EditorPlugin.xml +++ b/doc/classes/EditorPlugin.xml @@ -169,6 +169,8 @@ <return type="bool"> </return> <description> + This method is called when the editor is about to run the project. The plugin can then perform required operations before the project runs. + This method must return a boolean. If this method returns [code]false[/code], the project will not run. The run is aborted immediately, so this also prevents all other plugins' [method build] methods from running. </description> </method> <method name="clear" qualifiers="virtual"> @@ -559,7 +561,7 @@ <argument index="0" name="script" type="Script"> </argument> <description> - Removes the debugger plugin with given script fromm the Debugger. + Removes the debugger plugin with given script from the Debugger. </description> </method> <method name="remove_export_plugin"> @@ -675,6 +677,10 @@ Emitted when user changes the workspace ([b]2D[/b], [b]3D[/b], [b]Script[/b], [b]AssetLib[/b]). Also works with custom screens defined by plugins. </description> </signal> + <signal name="project_settings_changed"> + <description> + </description> + </signal> <signal name="resource_saved"> <argument index="0" name="resource" type="Resource"> </argument> diff --git a/doc/classes/EditorSceneImporter.xml b/doc/classes/EditorSceneImporter.xml index db85b859e5..aa55a1653d 100644 --- a/doc/classes/EditorSceneImporter.xml +++ b/doc/classes/EditorSceneImporter.xml @@ -74,21 +74,11 @@ </constant> <constant name="IMPORT_ANIMATION" value="2"> </constant> - <constant name="IMPORT_ANIMATION_DETECT_LOOP" value="4"> + <constant name="IMPORT_FAIL_ON_MISSING_DEPENDENCIES" value="4"> </constant> - <constant name="IMPORT_ANIMATION_OPTIMIZE" value="8"> + <constant name="IMPORT_GENERATE_TANGENT_ARRAYS" value="8"> </constant> - <constant name="IMPORT_ANIMATION_FORCE_ALL_TRACKS_IN_ALL_CLIPS" value="16"> - </constant> - <constant name="IMPORT_ANIMATION_KEEP_VALUE_TRACKS" value="32"> - </constant> - <constant name="IMPORT_GENERATE_TANGENT_ARRAYS" value="256"> - </constant> - <constant name="IMPORT_FAIL_ON_MISSING_DEPENDENCIES" value="512"> - </constant> - <constant name="IMPORT_MATERIALS_IN_INSTANCES" value="1024"> - </constant> - <constant name="IMPORT_USE_COMPRESSION" value="2048"> + <constant name="IMPORT_USE_NAMED_SKIN_BINDS" value="16"> </constant> </constants> </class> diff --git a/doc/classes/EditorSceneImporterGLTF.xml b/doc/classes/EditorSceneImporterGLTF.xml deleted file mode 100644 index e717b30f73..0000000000 --- a/doc/classes/EditorSceneImporterGLTF.xml +++ /dev/null @@ -1,13 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="EditorSceneImporterGLTF" inherits="EditorSceneImporter" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/EditorSceneImporterMesh.xml b/doc/classes/EditorSceneImporterMesh.xml index 1c903bd889..9daa3f16bc 100644 --- a/doc/classes/EditorSceneImporterMesh.xml +++ b/doc/classes/EditorSceneImporterMesh.xml @@ -29,7 +29,7 @@ </argument> <argument index="4" name="material" type="Material" default="null"> </argument> - <argument index="5" name="arg5" type="String" default=""""> + <argument index="5" name="name" type="String" default=""""> </argument> <description> </description> @@ -60,9 +60,17 @@ <description> </description> </method> + <method name="get_lightmap_size_hint" qualifiers="const"> + <return type="Vector2i"> + </return> + <description> + </description> + </method> <method name="get_mesh"> <return type="ArrayMesh"> </return> + <argument index="0" name="arg0" type="Mesh"> + </argument> <description> </description> </method> @@ -150,6 +158,14 @@ <description> </description> </method> + <method name="set_lightmap_size_hint"> + <return type="void"> + </return> + <argument index="0" name="size" type="Vector2i"> + </argument> + <description> + </description> + </method> </methods> <members> <member name="_data" type="Dictionary" setter="_set_data" getter="_get_data" default="{"surfaces": [ ]}"> diff --git a/doc/classes/EditorScenePostImport.xml b/doc/classes/EditorScenePostImport.xml index 5cddecffa8..d1cdc4e43e 100644 --- a/doc/classes/EditorScenePostImport.xml +++ b/doc/classes/EditorScenePostImport.xml @@ -62,13 +62,6 @@ Returns the source file path which got imported (e.g. [code]res://scene.dae[/code]). </description> </method> - <method name="get_source_folder" qualifiers="const"> - <return type="String"> - </return> - <description> - Returns the resource folder the imported scene file is located in. - </description> - </method> <method name="post_import" qualifiers="virtual"> <return type="Object"> </return> diff --git a/doc/classes/EditorSettings.xml b/doc/classes/EditorSettings.xml index 6088ae7a43..016d0128eb 100644 --- a/doc/classes/EditorSettings.xml +++ b/doc/classes/EditorSettings.xml @@ -160,6 +160,16 @@ Returns the default value of the setting specified by [code]name[/code]. This is the value that would be applied when clicking the Revert button in the Editor Settings. </description> </method> + <method name="set_builtin_action_override"> + <return type="void"> + </return> + <argument index="0" name="name" type="String"> + </argument> + <argument index="1" name="actions_list" type="Array"> + </argument> + <description> + </description> + </method> <method name="set_favorites"> <return type="void"> </return> diff --git a/doc/classes/EditorSyntaxHighlighter.xml b/doc/classes/EditorSyntaxHighlighter.xml index 103d95e1d6..b80e81928f 100644 --- a/doc/classes/EditorSyntaxHighlighter.xml +++ b/doc/classes/EditorSyntaxHighlighter.xml @@ -1,8 +1,11 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="EditorSyntaxHighlighter" inherits="SyntaxHighlighter" version="4.0"> <brief_description> + Base Syntax highlighter resource for the [ScriptEditor]. </brief_description> <description> + Base syntax highlighter resource all editor syntax highlighters extend from, it is used in the [ScriptEditor]. + Add a syntax highlighter to an individual script by calling [method ScriptEditorBase.add_syntax_highlighter]. To apply to all scripts on open, call [method ScriptEditor.register_syntax_highlighter] </description> <tutorials> </tutorials> @@ -11,18 +14,21 @@ <return type="String"> </return> <description> + Virtual method which can be overridden to return the syntax highlighter name. </description> </method> <method name="_get_supported_extentions" qualifiers="virtual"> <return type="Array"> </return> <description> + Virtual method which can be overridden to return the supported file extensions. </description> </method> <method name="_get_supported_languages" qualifiers="virtual"> <return type="Array"> </return> <description> + Virtual method which can be overridden to return the supported language names. </description> </method> </methods> diff --git a/doc/classes/EditorVCSInterface.xml b/doc/classes/EditorVCSInterface.xml index bb356c2183..0056b5ce16 100644 --- a/doc/classes/EditorVCSInterface.xml +++ b/doc/classes/EditorVCSInterface.xml @@ -38,7 +38,7 @@ <return type="Dictionary"> </return> <description> - Returns a [Dictionary] containing the path of the detected file change mapped to an integer signifying what kind of a change the corresponding file has experienced. + Returns a [Dictionary] containing the path of the detected file change mapped to an integer signifying what kind of change the corresponding file has experienced. The following integer values are being used to signify that the detected file is: - [code]0[/code]: New to the VCS working directory - [code]1[/code]: Modified diff --git a/doc/classes/Engine.xml b/doc/classes/Engine.xml index 02b81ee9b7..f9d8cf574a 100644 --- a/doc/classes/Engine.xml +++ b/doc/classes/Engine.xml @@ -162,7 +162,7 @@ The number of fixed iterations per second. This controls how often physics simulation and [method Node._physics_process] methods are run. This value should generally always be set to [code]60[/code] or above, as Godot doesn't interpolate the physics step. As a result, values lower than [code]60[/code] will look stuttery. This value can be increased to make input more reactive or work around tunneling issues, but keep in mind doing so will increase CPU usage. </member> <member name="physics_jitter_fix" type="float" setter="set_physics_jitter_fix" getter="get_physics_jitter_fix" default="0.5"> - Controls how much physics ticks are synchronized with real time. For 0 or less, the ticks are synchronized. Such values are recommended for network games, where clock synchronization matters. Higher values cause higher deviation of in-game clock and real clock, but allows to smooth out framerate jitters. The default value of 0.5 should be fine for most; values above 2 could cause the game to react to dropped frames with a noticeable delay and are not recommended. + Controls how much physics ticks are synchronized with real time. For 0 or less, the ticks are synchronized. Such values are recommended for network games, where clock synchronization matters. Higher values cause higher deviation of in-game clock and real clock, but allows smoothing out framerate jitters. The default value of 0.5 should be fine for most; values above 2 could cause the game to react to dropped frames with a noticeable delay and are not recommended. </member> <member name="target_fps" type="int" setter="set_target_fps" getter="get_target_fps" default="0"> The desired frames per second. If the hardware cannot keep up, this setting may not be respected. A value of 0 means no limit. diff --git a/doc/classes/Environment.xml b/doc/classes/Environment.xml index 9dd4ecc37b..6909fac2b7 100644 --- a/doc/classes/Environment.xml +++ b/doc/classes/Environment.xml @@ -169,11 +169,15 @@ </member> <member name="reflected_light_source" type="int" setter="set_reflection_source" getter="get_reflection_source" enum="Environment.ReflectionSource" default="0"> </member> + <member name="sdfgi_bounce_feedback" type="float" setter="set_sdfgi_bounce_feedback" getter="get_sdfgi_bounce_feedback" default="0.0"> + </member> <member name="sdfgi_cascade0_distance" type="float" setter="set_sdfgi_cascade0_distance" getter="get_sdfgi_cascade0_distance" default="12.8"> </member> <member name="sdfgi_cascades" type="int" setter="set_sdfgi_cascades" getter="get_sdfgi_cascades" enum="Environment.SDFGICascades" default="1"> </member> <member name="sdfgi_enabled" type="bool" setter="set_sdfgi_enabled" getter="is_sdfgi_enabled" default="false"> + If [code]true[/code], enables signed distance field global illumination. + [b]Note:[/b] Meshes should have sufficiently thick walls to avoid light leaks (avoid one-sided walls). For interior levels, enclose your level geometry in a sufficiently large box and bridge the loops to close the mesh. </member> <member name="sdfgi_energy" type="float" setter="set_sdfgi_energy" getter="get_sdfgi_energy" default="1.0"> </member> @@ -187,8 +191,6 @@ </member> <member name="sdfgi_read_sky_light" type="bool" setter="set_sdfgi_read_sky_light" getter="is_sdfgi_reading_sky_light" default="false"> </member> - <member name="sdfgi_use_multi_bounce" type="bool" setter="set_sdfgi_use_multi_bounce" getter="is_sdfgi_using_multi_bounce" default="false"> - </member> <member name="sdfgi_use_occlusion" type="bool" setter="set_sdfgi_use_occlusion" getter="is_sdfgi_using_occlusion" default="false"> </member> <member name="sdfgi_y_scale" type="int" setter="set_sdfgi_y_scale" getter="get_sdfgi_y_scale" enum="Environment.SDFGIYScale" default="0"> @@ -265,12 +267,14 @@ </member> <member name="volumetric_fog_light_energy" type="float" setter="set_volumetric_fog_light_energy" getter="get_volumetric_fog_light_energy" default="1.0"> </member> - <member name="volumetric_fog_shadow_filter" type="int" setter="set_volumetric_fog_shadow_filter" getter="get_volumetric_fog_shadow_filter" enum="Environment.VolumetricFogShadowFilter" default="1"> + <member name="volumetric_fog_temporal_reprojection_amount" type="float" setter="set_volumetric_fog_temporal_reprojection_amount" getter="get_volumetric_fog_temporal_reprojection_amount" default="0.9"> + </member> + <member name="volumetric_fog_temporal_reprojection_enabled" type="bool" setter="set_volumetric_fog_temporal_reprojection_enabled" getter="is_volumetric_fog_temporal_reprojection_enabled" default="true"> </member> </members> <constants> <constant name="BG_CLEAR_COLOR" value="0" enum="BGMode"> - Clears the background using the clear color defined in [member ProjectSettings.rendering/environment/default_clear_color]. + Clears the background using the clear color defined in [member ProjectSettings.rendering/environment/defaults/default_clear_color]. </constant> <constant name="BG_COLOR" value="1" enum="BGMode"> Clears the background using a custom clear color. diff --git a/doc/classes/File.xml b/doc/classes/File.xml index 2f7ac551cf..e0781e807f 100644 --- a/doc/classes/File.xml +++ b/doc/classes/File.xml @@ -42,6 +42,7 @@ [/codeblocks] In the example above, the file will be saved in the user data folder as specified in the [url=https://docs.godotengine.org/en/latest/tutorials/io/data_paths.html]Data paths[/url] documentation. [b]Note:[/b] To access project resources once exported, it is recommended to use [ResourceLoader] instead of the [File] API, as some files are converted to engine-specific formats and their original source files might not be present in the exported PCK package. + [b]Note:[/b] Files are automatically closed only if the process exits "normally" (such as by clicking the window manager's close button or pressing [b]Alt + F4[/b]). If you stop the project execution by pressing [b]F8[/b] while the project is running, the file won't be closed as the game process will be killed. You can work around this by calling [method flush] at regular intervals. </description> <tutorials> <link title="File system">https://docs.godotengine.org/en/latest/getting_started/step_by_step/filesystem.html</link> @@ -52,7 +53,7 @@ <return type="void"> </return> <description> - Closes the currently opened file. + Closes the currently opened file and prevents subsequent read/write operations. Use [method flush] to persist the data to disk without closing the file. </description> </method> <method name="eof_reached" qualifiers="const"> @@ -73,6 +74,14 @@ [b]Note:[/b] Many resources types are imported (e.g. textures or sound files), and their source asset will not be included in the exported game, as only the imported version is used. See [method ResourceLoader.exists] for an alternative approach that takes resource remapping into account. </description> </method> + <method name="flush"> + <return type="void"> + </return> + <description> + Writes the file's buffer to disk. Flushing is automatically performed when the file is closed. This means you don't need to call [method flush] manually before closing a file using [method close]. Still, calling [method flush] can be used to ensure the data is safe even if the project crashes instead of being closed gracefully. + [b]Note:[/b] Only call [method flush] when you actually need it. Otherwise, it will decrease performance due to constant disk writes. + </description> + </method> <method name="get_16" qualifiers="const"> <return type="int"> </return> @@ -481,8 +490,9 @@ </methods> <members> <member name="endian_swap" type="bool" setter="set_endian_swap" getter="get_endian_swap" default="false"> - If [code]true[/code], the file's endianness is swapped. Use this if you're dealing with files written on big-endian machines. - [b]Note:[/b] This is about the file format, not CPU type. This is always reset to [code]false[/code] whenever you open the file. + If [code]true[/code], the file is read with big-endian [url=https://en.wikipedia.org/wiki/Endianness]endianness[/url]. If [code]false[/code], the file is read with little-endian endianness. If in doubt, leave this to [code]false[/code] as most files are written with little-endian endianness. + [b]Note:[/b] [member endian_swap] is only about the file format, not the CPU type. The CPU endianness doesn't affect the default endianness for files written. + [b]Note:[/b] This is always reset to [code]false[/code] whenever you open the file. Therefore, you must set [member endian_swap] [i]after[/i] opening the file, not before. </member> </members> <constants> diff --git a/doc/classes/FileDialog.xml b/doc/classes/FileDialog.xml index ed437aefd5..966be0a981 100644 --- a/doc/classes/FileDialog.xml +++ b/doc/classes/FileDialog.xml @@ -133,6 +133,9 @@ </constant> </constants> <theme_items> + <theme_item name="back_folder" type="Texture2D"> + Custom icon for the back arrow. + </theme_item> <theme_item name="file" type="Texture2D"> Custom icon for files. </theme_item> @@ -148,6 +151,9 @@ <theme_item name="folder_icon_modulate" type="Color" default="Color( 1, 1, 1, 1 )"> The color modulation applied to the folder icon. </theme_item> + <theme_item name="forward_folder" type="Texture2D"> + Custom icon for the forward arrow. + </theme_item> <theme_item name="parent_folder" type="Texture2D"> Custom icon for the parent folder arrow. </theme_item> diff --git a/doc/classes/Font.xml b/doc/classes/Font.xml index edd2bd137f..20d5b6ce9b 100644 --- a/doc/classes/Font.xml +++ b/doc/classes/Font.xml @@ -175,7 +175,7 @@ </argument> <description> Returns the size of a character, optionally taking kerning into account if the next character is provided. - [b]Note:[/b] Do not use this function to calculate width of the string character by character, use [method get_string_size] or [TextLine] instead. + [b]Note:[/b] Do not use this function to calculate width of the string character by character, use [method get_string_size] or [TextLine] instead. The height returned is the font height (see also [method get_height]) and has no relation to the glyph height. </description> </method> <method name="get_data" qualifiers="const"> @@ -247,7 +247,8 @@ <argument index="1" name="size" type="int" default="-1"> </argument> <description> - Returns the size size of a bounding box of a string, taking kerning and advance into account. + Returns the size of a bounding box of a string, taking kerning and advance into account. + [b]Note:[/b] Real height of the string is context-dependent and can be significantly different from the value returned by [method get_height]. See also [method draw_string]. </description> </method> @@ -329,10 +330,10 @@ </methods> <members> <member name="extra_spacing_bottom" type="int" setter="set_spacing" getter="get_spacing" default="0"> - Extra spacing at the bottom in pixels. + Extra spacing at the bottom of the line in pixels. </member> <member name="extra_spacing_top" type="int" setter="set_spacing" getter="get_spacing" default="0"> - Extra character spacing in pixels. + Extra spacing at the top of the line in pixels. </member> </members> <constants> diff --git a/doc/classes/FontData.xml b/doc/classes/FontData.xml index e2c35f9ce7..e426c8fb36 100644 --- a/doc/classes/FontData.xml +++ b/doc/classes/FontData.xml @@ -11,6 +11,45 @@ <tutorials> </tutorials> <methods> + <method name="bitmap_add_char"> + <return type="void"> + </return> + <argument index="0" name="char" type="int"> + </argument> + <argument index="1" name="texture_idx" type="int"> + </argument> + <argument index="2" name="rect" type="Rect2"> + </argument> + <argument index="3" name="align" type="Vector2"> + </argument> + <argument index="4" name="advance" type="float"> + </argument> + <description> + Adds a character to the font, where [code]character[/code] is the Unicode value, [code]texture[/code] is the texture index, [code]rect[/code] is the region in the texture (in pixels!), [code]align[/code] is the (optional) alignment for the character and [code]advance[/code] is the (optional) advance. + </description> + </method> + <method name="bitmap_add_kerning_pair"> + <return type="void"> + </return> + <argument index="0" name="A" type="int"> + </argument> + <argument index="1" name="B" type="int"> + </argument> + <argument index="2" name="kerning" type="int"> + </argument> + <description> + Adds a kerning pair to the bitmap font as a difference. Kerning pairs are special cases where a typeface advance is determined by the next character. + </description> + </method> + <method name="bitmap_add_texture"> + <return type="void"> + </return> + <argument index="0" name="texture" type="Texture"> + </argument> + <description> + Adds a texture to the bitmap font. + </description> + </method> <method name="draw_glyph" qualifiers="const"> <return type="Vector2"> </return> @@ -154,6 +193,15 @@ Returns list of script support overrides. </description> </method> + <method name="get_spacing" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="type" type="int"> + </argument> + <description> + Returns the spacing for the given [code]type[/code] (see [enum SpacingType]). + </description> + </method> <method name="get_supported_chars" qualifiers="const"> <return type="String"> </return> @@ -256,6 +304,19 @@ Note: For non-scalable fonts [code]base_size[/code] is ignored, use [method get_base_size] to check actual font size. </description> </method> + <method name="new_bitmap"> + <return type="void"> + </return> + <argument index="0" name="height" type="float"> + </argument> + <argument index="1" name="ascent" type="float"> + </argument> + <argument index="2" name="base_size" type="int"> + </argument> + <description> + Creates new, empty bitmap font. + </description> + </method> <method name="remove_language_support_override"> <return type="void"> </return> @@ -296,6 +357,17 @@ Adds override for [method is_script_supported]. </description> </method> + <method name="set_spacing"> + <return type="void"> + </return> + <argument index="0" name="type" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + Sets the spacing for [code]type[/code] (see [enum SpacingType]) to [code]value[/code] in pixels (not relative to the font size). + </description> + </method> <method name="set_variation"> <return type="void"> </return> @@ -318,6 +390,14 @@ <member name="distance_field_hint" type="bool" setter="set_distance_field_hint" getter="get_distance_field_hint" default="false"> If [code]true[/code], distance field hint is enabled. </member> + <member name="extra_spacing_glyph" type="int" setter="set_spacing" getter="get_spacing" default="0"> + Extra spacing for each glyph in pixels. + This can be a negative number to make the distance between glyphs smaller. + </member> + <member name="extra_spacing_space" type="int" setter="set_spacing" getter="get_spacing" default="0"> + Extra spacing for the space character in pixels. + This can be a negative number to make the distance between words smaller. + </member> <member name="force_autohinter" type="bool" setter="set_force_autohinter" getter="get_force_autohinter" default="false"> If [code]true[/code], default autohinter is used for font hinting. </member> @@ -326,5 +406,11 @@ </member> </members> <constants> + <constant name="SPACING_GLYPH" value="0" enum="SpacingType"> + Spacing for each glyph. + </constant> + <constant name="SPACING_SPACE" value="1" enum="SpacingType"> + Spacing for the space character. + </constant> </constants> </class> diff --git a/doc/classes/GIProbe.xml b/doc/classes/GIProbe.xml index 52d3698201..4f56d1ad3e 100644 --- a/doc/classes/GIProbe.xml +++ b/doc/classes/GIProbe.xml @@ -5,7 +5,8 @@ </brief_description> <description> [GIProbe]s are used to provide high-quality real-time indirect light to scenes. They precompute the effect of objects that emit light and the effect of static geometry to simulate the behavior of complex light in real-time. [GIProbe]s need to be baked before using, however, once baked, dynamic objects will receive light from them. Further, lights can be fully dynamic or baked. - Having [GIProbe]s in a scene can be expensive, the quality of the probe can be turned down in exchange for better performance in the [ProjectSettings] using [member ProjectSettings.rendering/quality/gi_probes/quality]. + Having [GIProbe]s in a scene can be expensive, the quality of the probe can be turned down in exchange for better performance in the [ProjectSettings] using [member ProjectSettings.rendering/global_illumination/gi_probes/quality]. + [b]Note:[/b] Meshes should have sufficiently thick walls to avoid light leaks (avoid one-sided walls). For interior levels, enclose your level geometry in a sufficiently large box and bridge the loops to close the mesh. </description> <tutorials> <link title="GI probes">https://docs.godotengine.org/en/latest/tutorials/3d/gi_probes.html</link> diff --git a/doc/classes/GLTFAccessor.xml b/doc/classes/GLTFAccessor.xml deleted file mode 100644 index a1f596f7dd..0000000000 --- a/doc/classes/GLTFAccessor.xml +++ /dev/null @@ -1,43 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFAccessor" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="buffer_view" type="int" setter="set_buffer_view" getter="get_buffer_view" default="0"> - </member> - <member name="byte_offset" type="int" setter="set_byte_offset" getter="get_byte_offset" default="0"> - </member> - <member name="component_type" type="int" setter="set_component_type" getter="get_component_type" default="0"> - </member> - <member name="count" type="int" setter="set_count" getter="get_count" default="0"> - </member> - <member name="max" type="PackedFloat64Array" setter="set_max" getter="get_max" default="PackedFloat64Array( )"> - </member> - <member name="min" type="PackedFloat64Array" setter="set_min" getter="get_min" default="PackedFloat64Array( )"> - </member> - <member name="normalized" type="bool" setter="set_normalized" getter="get_normalized" default="false"> - </member> - <member name="sparse_count" type="int" setter="set_sparse_count" getter="get_sparse_count" default="0"> - </member> - <member name="sparse_indices_buffer_view" type="int" setter="set_sparse_indices_buffer_view" getter="get_sparse_indices_buffer_view" default="0"> - </member> - <member name="sparse_indices_byte_offset" type="int" setter="set_sparse_indices_byte_offset" getter="get_sparse_indices_byte_offset" default="0"> - </member> - <member name="sparse_indices_component_type" type="int" setter="set_sparse_indices_component_type" getter="get_sparse_indices_component_type" default="0"> - </member> - <member name="sparse_values_buffer_view" type="int" setter="set_sparse_values_buffer_view" getter="get_sparse_values_buffer_view" default="0"> - </member> - <member name="sparse_values_byte_offset" type="int" setter="set_sparse_values_byte_offset" getter="get_sparse_values_byte_offset" default="0"> - </member> - <member name="type" type="int" setter="set_type" getter="get_type" default="0"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFAnimation.xml b/doc/classes/GLTFAnimation.xml deleted file mode 100644 index 5c1fa02f11..0000000000 --- a/doc/classes/GLTFAnimation.xml +++ /dev/null @@ -1,17 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFAnimation" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="loop" type="bool" setter="set_loop" getter="get_loop" default="false"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFBufferView.xml b/doc/classes/GLTFBufferView.xml deleted file mode 100644 index edaad85e0a..0000000000 --- a/doc/classes/GLTFBufferView.xml +++ /dev/null @@ -1,25 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFBufferView" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="buffer" type="int" setter="set_buffer" getter="get_buffer" default="-1"> - </member> - <member name="byte_length" type="int" setter="set_byte_length" getter="get_byte_length" default="0"> - </member> - <member name="byte_offset" type="int" setter="set_byte_offset" getter="get_byte_offset" default="0"> - </member> - <member name="byte_stride" type="int" setter="set_byte_stride" getter="get_byte_stride" default="-1"> - </member> - <member name="indices" type="bool" setter="set_indices" getter="get_indices" default="false"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFCamera.xml b/doc/classes/GLTFCamera.xml deleted file mode 100644 index 0b95f2c802..0000000000 --- a/doc/classes/GLTFCamera.xml +++ /dev/null @@ -1,23 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFCamera" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="fov_size" type="float" setter="set_fov_size" getter="get_fov_size" default="75.0"> - </member> - <member name="perspective" type="bool" setter="set_perspective" getter="get_perspective" default="true"> - </member> - <member name="zfar" type="float" setter="set_zfar" getter="get_zfar" default="4000.0"> - </member> - <member name="znear" type="float" setter="set_znear" getter="get_znear" default="0.05"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFDocument.xml b/doc/classes/GLTFDocument.xml deleted file mode 100644 index 04c40dd752..0000000000 --- a/doc/classes/GLTFDocument.xml +++ /dev/null @@ -1,13 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFDocument" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFLight.xml b/doc/classes/GLTFLight.xml deleted file mode 100644 index bfeaf9a86e..0000000000 --- a/doc/classes/GLTFLight.xml +++ /dev/null @@ -1,27 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFLight" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="color" type="Color" setter="set_color" getter="get_color" default="Color( 0, 0, 0, 1 )"> - </member> - <member name="inner_cone_angle" type="float" setter="set_inner_cone_angle" getter="get_inner_cone_angle" default="0.0"> - </member> - <member name="intensity" type="float" setter="set_intensity" getter="get_intensity" default="0.0"> - </member> - <member name="outer_cone_angle" type="float" setter="set_outer_cone_angle" getter="get_outer_cone_angle" default="0.0"> - </member> - <member name="range" type="float" setter="set_range" getter="get_range" default="0.0"> - </member> - <member name="type" type="String" setter="set_type" getter="get_type" default=""""> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFMesh.xml b/doc/classes/GLTFMesh.xml deleted file mode 100644 index 55f79d2c55..0000000000 --- a/doc/classes/GLTFMesh.xml +++ /dev/null @@ -1,19 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFMesh" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="blend_weights" type="PackedFloat32Array" setter="set_blend_weights" getter="get_blend_weights" default="PackedFloat32Array( )"> - </member> - <member name="mesh" type="EditorSceneImporterMesh" setter="set_mesh" getter="get_mesh"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFNode.xml b/doc/classes/GLTFNode.xml deleted file mode 100644 index 5b7d4fadec..0000000000 --- a/doc/classes/GLTFNode.xml +++ /dev/null @@ -1,43 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFNode" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="camera" type="int" setter="set_camera" getter="get_camera" default="-1"> - </member> - <member name="children" type="PackedInt32Array" setter="set_children" getter="get_children" default="PackedInt32Array( )"> - </member> - <member name="fake_joint_parent" type="int" setter="set_fake_joint_parent" getter="get_fake_joint_parent" default="-1"> - </member> - <member name="height" type="int" setter="set_height" getter="get_height" default="-1"> - </member> - <member name="joint" type="bool" setter="set_joint" getter="get_joint" default="false"> - </member> - <member name="light" type="int" setter="set_light" getter="get_light" default="-1"> - </member> - <member name="mesh" type="int" setter="set_mesh" getter="get_mesh" default="-1"> - </member> - <member name="parent" type="int" setter="set_parent" getter="get_parent" default="-1"> - </member> - <member name="rotation" type="Quat" setter="set_rotation" getter="get_rotation" default="Quat( 0, 0, 0, 1 )"> - </member> - <member name="scale" type="Vector3" setter="set_scale" getter="get_scale" default="Vector3( 1, 1, 1 )"> - </member> - <member name="skeleton" type="int" setter="set_skeleton" getter="get_skeleton" default="-1"> - </member> - <member name="skin" type="int" setter="set_skin" getter="get_skin" default="-1"> - </member> - <member name="translation" type="Vector3" setter="set_translation" getter="get_translation" default="Vector3( 0, 0, 0 )"> - </member> - <member name="xform" type="Transform" setter="set_xform" getter="get_xform" default="Transform( 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0 )"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFSkeleton.xml b/doc/classes/GLTFSkeleton.xml deleted file mode 100644 index e27c838648..0000000000 --- a/doc/classes/GLTFSkeleton.xml +++ /dev/null @@ -1,67 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFSkeleton" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - <method name="get_bone_attachment"> - <return type="BoneAttachment3D"> - </return> - <argument index="0" name="arg0" type="int"> - </argument> - <description> - </description> - </method> - <method name="get_bone_attachment_count"> - <return type="int"> - </return> - <description> - </description> - </method> - <method name="get_godot_bone_node"> - <return type="Dictionary"> - </return> - <description> - </description> - </method> - <method name="get_godot_skeleton"> - <return type="Skeleton3D"> - </return> - <description> - </description> - </method> - <method name="get_unique_names"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="set_godot_bone_node"> - <return type="void"> - </return> - <argument index="0" name="godot_bone_node" type="Dictionary"> - </argument> - <description> - </description> - </method> - <method name="set_unique_names"> - <return type="void"> - </return> - <argument index="0" name="unique_names" type="Array"> - </argument> - <description> - </description> - </method> - </methods> - <members> - <member name="joints" type="PackedInt32Array" setter="set_joints" getter="get_joints" default="PackedInt32Array( )"> - </member> - <member name="roots" type="PackedInt32Array" setter="set_roots" getter="get_roots" default="PackedInt32Array( )"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFSkin.xml b/doc/classes/GLTFSkin.xml deleted file mode 100644 index 5a80c7097a..0000000000 --- a/doc/classes/GLTFSkin.xml +++ /dev/null @@ -1,71 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFSkin" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - <method name="get_inverse_binds"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_joint_i_to_bone_i"> - <return type="Dictionary"> - </return> - <description> - </description> - </method> - <method name="get_joint_i_to_name"> - <return type="Dictionary"> - </return> - <description> - </description> - </method> - <method name="set_inverse_binds"> - <return type="void"> - </return> - <argument index="0" name="inverse_binds" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_joint_i_to_bone_i"> - <return type="void"> - </return> - <argument index="0" name="joint_i_to_bone_i" type="Dictionary"> - </argument> - <description> - </description> - </method> - <method name="set_joint_i_to_name"> - <return type="void"> - </return> - <argument index="0" name="joint_i_to_name" type="Dictionary"> - </argument> - <description> - </description> - </method> - </methods> - <members> - <member name="godot_skin" type="Skin" setter="set_godot_skin" getter="get_godot_skin"> - </member> - <member name="joints" type="PackedInt32Array" setter="set_joints" getter="get_joints" default="PackedInt32Array( )"> - </member> - <member name="joints_original" type="PackedInt32Array" setter="set_joints_original" getter="get_joints_original" default="PackedInt32Array( )"> - </member> - <member name="non_joints" type="PackedInt32Array" setter="set_non_joints" getter="get_non_joints" default="PackedInt32Array( )"> - </member> - <member name="roots" type="PackedInt32Array" setter="set_roots" getter="get_roots" default="PackedInt32Array( )"> - </member> - <member name="skeleton" type="int" setter="set_skeleton" getter="get_skeleton" default="-1"> - </member> - <member name="skin_root" type="int" setter="set_skin_root" getter="get_skin_root" default="-1"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFSpecGloss.xml b/doc/classes/GLTFSpecGloss.xml deleted file mode 100644 index 68cc7c845d..0000000000 --- a/doc/classes/GLTFSpecGloss.xml +++ /dev/null @@ -1,25 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFSpecGloss" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="diffuse_factor" type="Color" setter="set_diffuse_factor" getter="get_diffuse_factor" default="Color( 1, 1, 1, 1 )"> - </member> - <member name="diffuse_img" type="Image" setter="set_diffuse_img" getter="get_diffuse_img"> - </member> - <member name="gloss_factor" type="float" setter="set_gloss_factor" getter="get_gloss_factor" default="1.0"> - </member> - <member name="spec_gloss_img" type="Image" setter="set_spec_gloss_img" getter="get_spec_gloss_img"> - </member> - <member name="specular_factor" type="Color" setter="set_specular_factor" getter="get_specular_factor" default="Color( 1, 1, 1, 1 )"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFState.xml b/doc/classes/GLTFState.xml deleted file mode 100644 index f7763efdb1..0000000000 --- a/doc/classes/GLTFState.xml +++ /dev/null @@ -1,251 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFState" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - <method name="get_accessors"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_animation_player"> - <return type="AnimationPlayer"> - </return> - <argument index="0" name="arg0" type="int"> - </argument> - <description> - </description> - </method> - <method name="get_animation_players_count"> - <return type="int"> - </return> - <argument index="0" name="arg0" type="int"> - </argument> - <description> - </description> - </method> - <method name="get_animations"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_buffer_views"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_cameras"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_images"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_lights"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_materials"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_meshes"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_nodes"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_scene_node"> - <return type="Node"> - </return> - <argument index="0" name="arg0" type="int"> - </argument> - <description> - </description> - </method> - <method name="get_skeleton_to_node"> - <return type="Dictionary"> - </return> - <description> - </description> - </method> - <method name="get_skeletons"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_skins"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_textures"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="get_unique_names"> - <return type="Array"> - </return> - <description> - </description> - </method> - <method name="set_accessors"> - <return type="void"> - </return> - <argument index="0" name="accessors" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_animations"> - <return type="void"> - </return> - <argument index="0" name="animations" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_buffer_views"> - <return type="void"> - </return> - <argument index="0" name="buffer_views" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_cameras"> - <return type="void"> - </return> - <argument index="0" name="cameras" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_images"> - <return type="void"> - </return> - <argument index="0" name="images" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_lights"> - <return type="void"> - </return> - <argument index="0" name="lights" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_materials"> - <return type="void"> - </return> - <argument index="0" name="materials" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_meshes"> - <return type="void"> - </return> - <argument index="0" name="meshes" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_nodes"> - <return type="void"> - </return> - <argument index="0" name="nodes" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_skeleton_to_node"> - <return type="void"> - </return> - <argument index="0" name="skeleton_to_node" type="Dictionary"> - </argument> - <description> - </description> - </method> - <method name="set_skeletons"> - <return type="void"> - </return> - <argument index="0" name="skeletons" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_skins"> - <return type="void"> - </return> - <argument index="0" name="skins" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_textures"> - <return type="void"> - </return> - <argument index="0" name="textures" type="Array"> - </argument> - <description> - </description> - </method> - <method name="set_unique_names"> - <return type="void"> - </return> - <argument index="0" name="unique_names" type="Array"> - </argument> - <description> - </description> - </method> - </methods> - <members> - <member name="buffers" type="Array" setter="set_buffers" getter="get_buffers" default="[ ]"> - </member> - <member name="glb_data" type="PackedByteArray" setter="set_glb_data" getter="get_glb_data" default="PackedByteArray( )"> - </member> - <member name="json" type="Dictionary" setter="set_json" getter="get_json" default="{}"> - </member> - <member name="major_version" type="int" setter="set_major_version" getter="get_major_version" default="0"> - </member> - <member name="minor_version" type="int" setter="set_minor_version" getter="get_minor_version" default="0"> - </member> - <member name="root_nodes" type="Array" setter="set_root_nodes" getter="get_root_nodes" default="[ ]"> - </member> - <member name="scene_name" type="String" setter="set_scene_name" getter="get_scene_name" default=""""> - </member> - <member name="use_named_skin_binds" type="bool" setter="set_use_named_skin_binds" getter="get_use_named_skin_binds" default="false"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/GLTFTexture.xml b/doc/classes/GLTFTexture.xml deleted file mode 100644 index c7f94ab0da..0000000000 --- a/doc/classes/GLTFTexture.xml +++ /dev/null @@ -1,17 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="GLTFTexture" inherits="Resource" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <members> - <member name="src_image" type="int" setter="set_src_image" getter="get_src_image" default="4"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/Geometry3D.xml b/doc/classes/Geometry3D.xml index d0b930defb..9f012008e3 100644 --- a/doc/classes/Geometry3D.xml +++ b/doc/classes/Geometry3D.xml @@ -129,7 +129,7 @@ <argument index="2" name="planes" type="Array"> </argument> <description> - Given a convex hull defined though the [Plane]s in the array [code]planes[/code], tests if the segment ([code]from[/code], [code]to[/code]) intersects with that hull. If an intersection is found, returns a [PackedVector3Array] containing the point the intersection and the hull's normal. If no intersecion is found, an the returned array is empty. + Given a convex hull defined though the [Plane]s in the array [code]planes[/code], tests if the segment ([code]from[/code], [code]to[/code]) intersects with that hull. If an intersection is found, returns a [PackedVector3Array] containing the point the intersection and the hull's normal. Otherwise, returns an empty array. </description> </method> <method name="segment_intersects_cylinder"> diff --git a/doc/classes/GraphEdit.xml b/doc/classes/GraphEdit.xml index 10afa4c339..b4536c0589 100644 --- a/doc/classes/GraphEdit.xml +++ b/doc/classes/GraphEdit.xml @@ -88,7 +88,7 @@ </return> <description> Gets the [HBoxContainer] that contains the zooming and grid snap controls in the top left of the graph. - Warning: The intended usage of this function is to allow you to reposition or add your own custom controls to the container. This is an internal control and as such should not be freed. If you wish to hide this or any of it's children use their [member CanvasItem.visible] property instead. + Warning: The intended usage of this function is to allow you to reposition or add your own custom controls to the container. This is an internal control and as such should not be freed. If you wish to hide this or any of its children, use their [member CanvasItem.visible] property instead. </description> </method> <method name="is_node_connected"> diff --git a/doc/classes/GraphNode.xml b/doc/classes/GraphNode.xml index 4b0ea4dcb1..aae3126c0f 100644 --- a/doc/classes/GraphNode.xml +++ b/doc/classes/GraphNode.xml @@ -6,7 +6,7 @@ <description> A GraphNode is a container. Each GraphNode can have several input and output slots, sometimes referred to as ports, allowing connections between GraphNodes. To add a slot to GraphNode, add any [Control]-derived child node to it. After adding at least one child to GraphNode new sections will be automatically created in the Inspector called 'Slot'. When 'Slot' is expanded you will see list with index number for each slot. You can click on each of them to expand further. - In the Inspector you can enable (show) or disable (hide) slots. By default all slots are disabled so you may not see any slots on your GraphNode initially. You can assign a type to each slot. Only slots of the same type will be able to connect to each other. You can also assign colors to slots. A tuple of input and output slots is defined for each GUI element included in the GraphNode. Input connections are on the left and output connections are on the right side of GraphNode. Only enabled slots are counted as connections. + In the Inspector you can enable (show) or disable (hide) slots. By default, all slots are disabled so you may not see any slots on your GraphNode initially. You can assign a type to each slot. Only slots of the same type will be able to connect to each other. You can also assign colors to slots. A tuple of input and output slots is defined for each GUI element included in the GraphNode. Input connections are on the left and output connections are on the right side of GraphNode. Only enabled slots are counted as connections. </description> <tutorials> </tutorials> @@ -272,6 +272,13 @@ Emitted when the GraphNode is requested to be resized. Happens on dragging the resizer handle (see [member resizable]). </description> </signal> + <signal name="slot_updated"> + <argument index="0" name="idx" type="int"> + </argument> + <description> + Emitted when any GraphNode's slot is updated. + </description> + </signal> </signals> <constants> <constant name="OVERLAY_DISABLED" value="0" enum="Overlay"> diff --git a/doc/classes/HTTPClient.xml b/doc/classes/HTTPClient.xml index b6594aac39..ddfcdf7724 100644 --- a/doc/classes/HTTPClient.xml +++ b/doc/classes/HTTPClient.xml @@ -4,7 +4,7 @@ Low-level hyper-text transfer protocol client. </brief_description> <description> - Hyper-text transfer protocol client (sometimes called "User Agent"). Used to make HTTP requests to download web content, upload files and other data or to communicate with various services, among other use cases. [b]See the [HTTPRequest] node for an higher-level alternative.[/b] + Hyper-text transfer protocol client (sometimes called "User Agent"). Used to make HTTP requests to download web content, upload files and other data or to communicate with various services, among other use cases. [b]See the [HTTPRequest] node for a higher-level alternative.[/b] [b]Note:[/b] This client only needs to connect to a host once (see [method connect_to_host]) to send multiple requests. Because of this, methods that take URLs usually take just the part after the host instead of the full URL, as the client is already connected to a host. See [method request] for a full example and to get started. A [HTTPClient] should be reused between multiple requests or to connect to different hosts instead of creating one client per request. Supports SSL and SSL server certificate verification. HTTP status codes in the 2xx range indicate success, 3xx redirection (i.e. "try again, but over here"), 4xx something was wrong with the request, and 5xx something went wrong on the server's side. For more information on HTTP, see https://developer.mozilla.org/en-US/docs/Web/HTTP (or read RFC 2616 to get it straight from the source: https://tools.ietf.org/html/rfc2616). @@ -175,7 +175,7 @@ var result = new HTTPClient().Request(HTTPClient.Method.Post, "index.php", headers, queryString); [/csharp] [/codeblocks] - [b]Note:[/b] The [code]request_data[/code] parameter is ignored if [code]method[/code] is [constant HTTPClient.METHOD_GET]. This is because GET methods can't contain request data. As a workaround, you can pass request data as a query string in the URL. See [method String.http_escape] for an example. + [b]Note:[/b] The [code]request_data[/code] parameter is ignored if [code]method[/code] is [constant HTTPClient.METHOD_GET]. This is because GET methods can't contain request data. As a workaround, you can pass request data as a query string in the URL. See [method String.uri_encode] for an example. </description> </method> <method name="request_raw"> diff --git a/doc/classes/HTTPRequest.xml b/doc/classes/HTTPRequest.xml index f2ab93033a..25667d8f79 100644 --- a/doc/classes/HTTPRequest.xml +++ b/doc/classes/HTTPRequest.xml @@ -203,7 +203,7 @@ <description> Creates request on the underlying [HTTPClient]. If there is no configuration errors, it tries to connect using [method HTTPClient.connect_to_host] and passes parameters onto [method HTTPClient.request]. Returns [constant OK] if request is successfully created. (Does not imply that the server has responded), [constant ERR_UNCONFIGURED] if not in the tree, [constant ERR_BUSY] if still processing previous request, [constant ERR_INVALID_PARAMETER] if given string is not a valid URL format, or [constant ERR_CANT_CONNECT] if not using thread and the [HTTPClient] cannot connect to host. - [b]Note:[/b] The [code]request_data[/code] parameter is ignored if [code]method[/code] is [constant HTTPClient.METHOD_GET]. This is because GET methods can't contain request data. As a workaround, you can pass request data as a query string in the URL. See [method String.http_escape] for an example. + [b]Note:[/b] The [code]request_data[/code] parameter is ignored if [code]method[/code] is [constant HTTPClient.METHOD_GET]. This is because GET methods can't contain request data. As a workaround, you can pass request data as a query string in the URL. See [method String.uri_encode] for an example. </description> </method> <method name="request_raw"> @@ -229,7 +229,7 @@ <member name="accept_gzip" type="bool" setter="set_accept_gzip" getter="is_accepting_gzip" default="true"> If [code]true[/code], this header will be added to each request: [code]Accept-Encoding: gzip, deflate[/code] telling servers that it's okay to compress response bodies. Any Response body declaring a [code]Content-Encoding[/code] of either [code]gzip[/code] or [code]deflate[/code] will then be automatically decompressed, and the uncompressed bytes will be delivered via [code]request_completed[/code]. - If the user has specified their own [code]Accept-Encoding[/code] header, then no header will be added regaurdless of [code]accept_gzip[/code]. + If the user has specified their own [code]Accept-Encoding[/code] header, then no header will be added regardless of [code]accept_gzip[/code]. If [code]false[/code] no header will be added, and no decompression will be performed on response bodies. The raw bytes of the response body will be returned via [code]request_completed[/code]. </member> <member name="body_size_limit" type="int" setter="set_body_size_limit" getter="get_body_size_limit" default="-1"> diff --git a/doc/classes/IP.xml b/doc/classes/IP.xml index 152f381a83..849f036bbd 100644 --- a/doc/classes/IP.xml +++ b/doc/classes/IP.xml @@ -31,7 +31,7 @@ <return type="Array"> </return> <description> - Returns all of the user's current IPv4 and IPv6 addresses as an array. + Returns all the user's current IPv4 and IPv6 addresses as an array. </description> </method> <method name="get_local_interfaces" qualifiers="const"> diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml index 3dba5d13aa..9d87c9bf9a 100644 --- a/doc/classes/Image.xml +++ b/doc/classes/Image.xml @@ -12,6 +12,18 @@ <link title="Importing images">https://docs.godotengine.org/en/latest/getting_started/workflow/assets/importing_images.html</link> </tutorials> <methods> + <method name="adjust_bcs"> + <return type="void"> + </return> + <argument index="0" name="brightness" type="float"> + </argument> + <argument index="1" name="contrast" type="float"> + </argument> + <argument index="2" name="saturation" type="float"> + </argument> + <description> + </description> + </method> <method name="blend_rect"> <return type="void"> </return> @@ -228,7 +240,7 @@ <argument index="0" name="renormalize" type="bool" default="false"> </argument> <description> - Generates mipmaps for the image. Mipmaps are pre-calculated and lower resolution copies of the image. Mipmaps are automatically used if the image needs to be scaled down when rendered. This improves image quality and the performance of the rendering. Returns an error if the image is compressed, in a custom format or if the image's width/height is 0. + Generates mipmaps for the image. Mipmaps are precalculated and lower resolution copies of the image. Mipmaps are automatically used if the image needs to be scaled down when rendered. This improves image quality and the performance of the rendering. Returns an error if the image is compressed, in a custom format or if the image's width/height is 0. </description> </method> <method name="get_data" qualifiers="const"> @@ -548,7 +560,7 @@ </methods> <members> <member name="data" type="Dictionary" setter="_set_data" getter="_get_data" default="{"data": PackedByteArray( ),"format": "Lum8","height": 0,"mipmaps": false,"width": 0}"> - Holds all of the image's color data in a given format. See [enum Format] constants. + Holds all the image's color data in a given format. See [enum Format] constants. </member> </members> <constants> diff --git a/doc/classes/ImageTexture.xml b/doc/classes/ImageTexture.xml index 2bea482bc1..5fef56e354 100644 --- a/doc/classes/ImageTexture.xml +++ b/doc/classes/ImageTexture.xml @@ -18,11 +18,11 @@ var texture = load("res://icon.png") $Sprite2D.texture = texture [/codeblock] - This is because images have to be imported as [StreamTexture2D] first to be loaded with [method @GDScript.load]. If you'd still like to load an image file just like any other [Resource], import it as an [Image] resource instead, and then load it normally using the [method @GDScript.load] method. - But do note that the image data can still be retrieved from an imported texture as well using the [method Texture2D.get_data] method, which returns a copy of the data: + This is because images have to be imported as a [StreamTexture2D] first to be loaded with [method @GDScript.load]. If you'd still like to load an image file just like any other [Resource], import it as an [Image] resource instead, and then load it normally using the [method @GDScript.load] method. + [b]Note:[/b] The image can be retrieved from an imported texture using the [method Texture2D.get_image] method, which returns a copy of the image: [codeblock] var texture = load("res://icon.png") - var image : Image = texture.get_data() + var image : Image = texture.get_image() [/codeblock] An [ImageTexture] is not meant to be operated from within the editor interface directly, and is mostly useful for rendering images on screen dynamically via code. If you need to generate images procedurally from within the editor, consider saving and importing images as custom texture resources implementing a new [EditorImportPlugin]. [b]Note:[/b] The maximum texture size is 16384×16384 pixels due to graphics hardware limitations. diff --git a/doc/classes/Input.xml b/doc/classes/Input.xml index cfb3e8d981..d7408cd0ff 100644 --- a/doc/classes/Input.xml +++ b/doc/classes/Input.xml @@ -49,7 +49,7 @@ <return type="Vector3"> </return> <description> - Returns the acceleration of the device's accelerometer sensor, if the device has one. Otherwise, the method returns [constant Vector3.ZERO]. + Returns the acceleration in m/s² of the device's accelerometer sensor, if the device has one. Otherwise, the method returns [constant Vector3.ZERO]. Note this method returns an empty [Vector3] when running from the editor even when your device has an accelerometer. You must export your project to a supported device to read values from the accelerometer. [b]Note:[/b] This method only works on iOS, Android, and UWP. On other platforms, it always returns [constant Vector3.ZERO]. </description> @@ -59,6 +59,8 @@ </return> <argument index="0" name="action" type="StringName"> </argument> + <argument index="1" name="exact_match" type="bool" default="false"> + </argument> <description> Returns a value between 0 and 1 representing the raw intensity of the given action, ignoring the action's deadzone. In most cases, you should use [method get_action_strength] instead. </description> @@ -68,6 +70,8 @@ </return> <argument index="0" name="action" type="StringName"> </argument> + <argument index="1" name="exact_match" type="bool" default="false"> + </argument> <description> Returns a value between 0 and 1 representing the intensity of the given action. In a joypad, for example, the further away the axis (analog sticks or L2, R2 triggers) is from the dead zone, the closer the value will be to 1. If the action is mapped to a control that has no axis as the keyboard, the value returned will be 0 or 1. </description> @@ -81,7 +85,7 @@ </argument> <description> Get axis input by specifying two actions, one negative and one positive. - This is a horthand for writing [code]Input.get_action_strength("positive_action") - Input.get_action_strength("negative_action")[/code]. + This is a shorthand for writing [code]Input.get_action_strength("positive_action") - Input.get_action_strength("negative_action")[/code]. </description> </method> <method name="get_connected_joypads"> @@ -102,7 +106,7 @@ <return type="Vector3"> </return> <description> - Returns the gravity of the device's accelerometer sensor, if the device has one. Otherwise, the method returns [constant Vector3.ZERO]. + Returns the gravity in m/s² of the device's accelerometer sensor, if the device has one. Otherwise, the method returns [constant Vector3.ZERO]. [b]Note:[/b] This method only works on Android and iOS. On other platforms, it always returns [constant Vector3.ZERO]. </description> </method> @@ -122,7 +126,7 @@ <argument index="1" name="axis" type="int"> </argument> <description> - Returns the current value of the joypad axis at given index (see [enum JoyAxisList]). + Returns the current value of the joypad axis at given index (see [enum JoyAxis]). </description> </method> <method name="get_joy_guid" qualifiers="const"> @@ -172,7 +176,7 @@ <return type="Vector3"> </return> <description> - Returns the the magnetic field strength in micro-Tesla for all axes of the device's magnetometer sensor, if the device has one. Otherwise, the method returns [constant Vector3.ZERO]. + Returns the magnetic field strength in micro-Tesla for all axes of the device's magnetometer sensor, if the device has one. Otherwise, the method returns [constant Vector3.ZERO]. [b]Note:[/b] This method only works on Android, iOS and UWP. On other platforms, it always returns [constant Vector3.ZERO]. </description> </method> @@ -214,6 +218,8 @@ </return> <argument index="0" name="action" type="StringName"> </argument> + <argument index="1" name="exact_match" type="bool" default="false"> + </argument> <description> Returns [code]true[/code] when the user starts pressing the action event, meaning it's [code]true[/code] only on the frame that the user pressed down the button. This is useful for code that needs to run only once when an action is pressed, instead of every frame while it's pressed. @@ -224,6 +230,8 @@ </return> <argument index="0" name="action" type="StringName"> </argument> + <argument index="1" name="exact_match" type="bool" default="false"> + </argument> <description> Returns [code]true[/code] when the user stops pressing the action event, meaning it's [code]true[/code] only on the frame that the user released the button. </description> @@ -233,6 +241,8 @@ </return> <argument index="0" name="action" type="StringName"> </argument> + <argument index="1" name="exact_match" type="bool" default="false"> + </argument> <description> Returns [code]true[/code] if you are pressing the action event. Note that if an action has multiple buttons assigned and more than one of them is pressed, releasing one button will release the action, even if some other button assigned to this action is still pressed. </description> @@ -245,7 +255,7 @@ <argument index="1" name="button" type="int"> </argument> <description> - Returns [code]true[/code] if you are pressing the joypad button (see [enum JoyButtonList]). + Returns [code]true[/code] if you are pressing the joypad button (see [enum JoyButton]). </description> </method> <method name="is_joy_known"> @@ -263,7 +273,7 @@ <argument index="0" name="keycode" type="int"> </argument> <description> - Returns [code]true[/code] if you are pressing the key in the current keyboard layout. You can pass a [enum KeyList] constant. + Returns [code]true[/code] if you are pressing the key in the current keyboard layout. You can pass a [enum Key] constant. </description> </method> <method name="is_mouse_button_pressed" qualifiers="const"> @@ -272,7 +282,7 @@ <argument index="0" name="button" type="int"> </argument> <description> - Returns [code]true[/code] if you are pressing the mouse button specified with [enum ButtonList]. + Returns [code]true[/code] if you are pressing the mouse button specified with [enum MouseButton]. </description> </method> <method name="joy_connection_changed"> diff --git a/doc/classes/InputEvent.xml b/doc/classes/InputEvent.xml index 8c6063bd67..28c4773f51 100644 --- a/doc/classes/InputEvent.xml +++ b/doc/classes/InputEvent.xml @@ -35,6 +35,8 @@ </return> <argument index="0" name="action" type="StringName"> </argument> + <argument index="1" name="exact_match" type="bool" default="false"> + </argument> <description> Returns a value between 0.0 and 1.0 depending on the given actions' state. Useful for getting the value of events of type [InputEventJoypadMotion]. </description> @@ -44,6 +46,8 @@ </return> <argument index="0" name="action" type="StringName"> </argument> + <argument index="1" name="exact_match" type="bool" default="false"> + </argument> <description> Returns [code]true[/code] if this input event matches a pre-defined action of any type. </description> @@ -55,6 +59,8 @@ </argument> <argument index="1" name="allow_echo" type="bool" default="false"> </argument> + <argument index="2" name="exact_match" type="bool" default="false"> + </argument> <description> Returns [code]true[/code] if the given action is being pressed (and is not an echo event for [InputEventKey] events, unless [code]allow_echo[/code] is [code]true[/code]). Not relevant for events of type [InputEventMouseMotion] or [InputEventScreenDrag]. </description> @@ -64,6 +70,8 @@ </return> <argument index="0" name="action" type="StringName"> </argument> + <argument index="1" name="exact_match" type="bool" default="false"> + </argument> <description> Returns [code]true[/code] if the given action is released (i.e. not pressed). Not relevant for events of type [InputEventMouseMotion] or [InputEventScreenDrag]. </description> diff --git a/doc/classes/InputEventAction.xml b/doc/classes/InputEventAction.xml index 1fe85a5ae8..ed290fc7e2 100644 --- a/doc/classes/InputEventAction.xml +++ b/doc/classes/InputEventAction.xml @@ -21,7 +21,7 @@ If [code]true[/code], the action's state is pressed. If [code]false[/code], the action's state is released. </member> <member name="strength" type="float" setter="set_strength" getter="get_strength" default="1.0"> - The action's strength between 0 and 1. This value is considered as equal to 0 if pressed is [code]false[/code]. The event strength allows faking analog joypad motion events, by precising how strongly is the joypad axis bent or pressed. + The action's strength between 0 and 1. This value is considered as equal to 0 if pressed is [code]false[/code]. The event strength allows faking analog joypad motion events, by specifying how strongly the joypad axis is bent or pressed. </member> </members> <constants> diff --git a/doc/classes/InputEventJoypadButton.xml b/doc/classes/InputEventJoypadButton.xml index 6ab4942f85..b1f4836f6e 100644 --- a/doc/classes/InputEventJoypadButton.xml +++ b/doc/classes/InputEventJoypadButton.xml @@ -13,7 +13,7 @@ </methods> <members> <member name="button_index" type="int" setter="set_button_index" getter="get_button_index" default="0"> - Button identifier. One of the [enum JoyButtonList] button constants. + Button identifier. One of the [enum JoyButton] button constants. </member> <member name="pressed" type="bool" setter="set_pressed" getter="is_pressed" default="false"> If [code]true[/code], the button's state is pressed. If [code]false[/code], the button's state is released. diff --git a/doc/classes/InputEventJoypadMotion.xml b/doc/classes/InputEventJoypadMotion.xml index 2d7787b568..39fdb14016 100644 --- a/doc/classes/InputEventJoypadMotion.xml +++ b/doc/classes/InputEventJoypadMotion.xml @@ -13,7 +13,7 @@ </methods> <members> <member name="axis" type="int" setter="set_axis" getter="get_axis" default="0"> - Axis identifier. Use one of the [enum JoyAxisList] axis constants. + Axis identifier. Use one of the [enum JoyAxis] axis constants. </member> <member name="axis_value" type="float" setter="set_axis_value" getter="get_axis_value" default="0.0"> Current position of the joystick on the given axis. The value ranges from [code]-1.0[/code] to [code]1.0[/code]. A value of [code]0[/code] means the axis is in its resting position. diff --git a/doc/classes/InputEventKey.xml b/doc/classes/InputEventKey.xml index fe91b9c13e..9f2b829823 100644 --- a/doc/classes/InputEventKey.xml +++ b/doc/classes/InputEventKey.xml @@ -32,11 +32,11 @@ If [code]true[/code], the key was already pressed before this event. It means the user is holding the key down. </member> <member name="keycode" type="int" setter="set_keycode" getter="get_keycode" default="0"> - The key keycode, which corresponds to one of the [enum KeyList] constants. Represent key in the current keyboard layout. + The key keycode, which corresponds to one of the [enum Key] constants. Represent key in the current keyboard layout. To get a human-readable representation of the [InputEventKey], use [code]OS.get_keycode_string(event.keycode)[/code] where [code]event[/code] is the [InputEventKey]. </member> <member name="physical_keycode" type="int" setter="set_physical_keycode" getter="get_physical_keycode" default="0"> - Key physical keycode, which corresponds to one of the [enum KeyList] constants. Represent the physical location of a key on the 101/102-key US QWERTY keyboard. + Key physical keycode, which corresponds to one of the [enum Key] constants. Represent the physical location of a key on the 101/102-key US QWERTY keyboard. To get a human-readable representation of the [InputEventKey], use [code]OS.get_keycode_string(event.keycode)[/code] where [code]event[/code] is the [InputEventKey]. </member> <member name="pressed" type="bool" setter="set_pressed" getter="is_pressed" default="false"> diff --git a/doc/classes/InputEventMouse.xml b/doc/classes/InputEventMouse.xml index 31e82bbaed..e54c3224da 100644 --- a/doc/classes/InputEventMouse.xml +++ b/doc/classes/InputEventMouse.xml @@ -13,7 +13,7 @@ </methods> <members> <member name="button_mask" type="int" setter="set_button_mask" getter="get_button_mask" default="0"> - The mouse button mask identifier, one of or a bitwise combination of the [enum ButtonList] button masks. + The mouse button mask identifier, one of or a bitwise combination of the [enum MouseButton] button masks. </member> <member name="global_position" type="Vector2" setter="set_global_position" getter="get_global_position" default="Vector2( 0, 0 )"> The global mouse position relative to the current [Viewport] when used in [method Control._gui_input], otherwise is at 0,0. diff --git a/doc/classes/InputEventMouseButton.xml b/doc/classes/InputEventMouseButton.xml index d7b64a9a2d..d7e92f8bca 100644 --- a/doc/classes/InputEventMouseButton.xml +++ b/doc/classes/InputEventMouseButton.xml @@ -13,7 +13,7 @@ </methods> <members> <member name="button_index" type="int" setter="set_button_index" getter="get_button_index" default="0"> - The mouse button identifier, one of the [enum ButtonList] button or button wheel constants. + The mouse button identifier, one of the [enum MouseButton] button or button wheel constants. </member> <member name="doubleclick" type="bool" setter="set_doubleclick" getter="is_doubleclick" default="false"> If [code]true[/code], the mouse button's state is a double-click. diff --git a/doc/classes/InputMap.xml b/doc/classes/InputMap.xml index 49d29b3a53..0fb18d8e81 100644 --- a/doc/classes/InputMap.xml +++ b/doc/classes/InputMap.xml @@ -100,6 +100,8 @@ </argument> <argument index="1" name="action" type="StringName"> </argument> + <argument index="2" name="exact_match" type="bool" default="false"> + </argument> <description> Returns [code]true[/code] if the given event is part of an existing action. This method ignores keyboard modifiers if the given [InputEvent] is not pressed (for proper release detection). See [method action_has_event] if you don't want this behavior. </description> diff --git a/doc/classes/ItemList.xml b/doc/classes/ItemList.xml index abc327e8bb..0020cbf242 100644 --- a/doc/classes/ItemList.xml +++ b/doc/classes/ItemList.xml @@ -302,16 +302,7 @@ <argument index="1" name="custom_bg_color" type="Color"> </argument> <description> - [codeblocks] - [gdscript] - var itemList = ItemList.new() - some_string.set_item_custom_bg_color(0, Color.red) # This will set the background color of the first item of the control to red. - [/gdscript] - [csharp] - var itemList = new ItemList(); - itemList.SetItemCustomBgColor(0, Colors.Red); // This will set the background color of the first item of the control to red. - [/csharp] - [/codeblocks] + Sets the background color of the item specified by [code]idx[/code] index to the specified [Color]. </description> </method> <method name="set_item_custom_fg_color"> @@ -323,16 +314,6 @@ </argument> <description> Sets the foreground color of the item specified by [code]idx[/code] index to the specified [Color]. - [codeblocks] - [gdscript] - var item_list = ItemList.new() - item_list.set_item_custom_fg_color(0, Color.red) # This will set the foreground color of the first item of the control to red. - [/gdscript] - [csharp] - var itemList = new ItemList(); - itemList.SetItemCustomFgColor(0, Colors.Red); // This will set the foreground color of the first item of the control to red. - [/csharp] - [/codeblocks] </description> </method> <method name="set_item_disabled"> @@ -615,6 +596,9 @@ <theme_item name="font_color" type="Color" default="Color( 0.63, 0.63, 0.63, 1 )"> Default text [Color] of the item. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the item. + </theme_item> <theme_item name="font_selected_color" type="Color" default="Color( 1, 1, 1, 1 )"> Text [Color] used when the item is selected. </theme_item> @@ -633,6 +617,9 @@ <theme_item name="line_separation" type="int" default="2"> The vertical spacing between each line of text. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the item text outline. + </theme_item> <theme_item name="selected" type="StyleBox"> [StyleBox] for the selected items, used when the [ItemList] is not being focused. </theme_item> diff --git a/doc/classes/KinematicBody2D.xml b/doc/classes/KinematicBody2D.xml index 476b64a336..fdd4db6115 100644 --- a/doc/classes/KinematicBody2D.xml +++ b/doc/classes/KinematicBody2D.xml @@ -162,7 +162,10 @@ </methods> <members> <member name="collision/safe_margin" type="float" setter="set_safe_margin" getter="get_safe_margin" default="0.08"> - If the body is at least this close to another body, this body will consider them to be colliding. + Extra margin used for collision recovery in motion functions (see [method move_and_collide], [method move_and_slide], [method move_and_slide_with_snap]). + If the body is at least this close to another body, it will consider them to be colliding and will be pushed away before performing the actual motion. + A higher value means it's more flexible for detecting collision, which helps with consistently detecting walls and floors. + A lower value forces the collision algorithm to use more exact detection, so it can be used in cases that specifically require precision, e.g at very low scale to avoid visible jittering, or for stability with a stack of kinematic bodies. </member> <member name="motion/sync_to_physics" type="bool" setter="set_sync_to_physics" getter="is_sync_to_physics_enabled" default="false"> If [code]true[/code], the body's movement will be synchronized to the physics frame. This is useful when animating movement via [AnimationPlayer], for example on moving platforms. Do [b]not[/b] use together with [method move_and_slide] or [method move_and_collide] functions. diff --git a/doc/classes/KinematicBody3D.xml b/doc/classes/KinematicBody3D.xml index a21496de54..efd3f58f88 100644 --- a/doc/classes/KinematicBody3D.xml +++ b/doc/classes/KinematicBody3D.xml @@ -177,7 +177,10 @@ Lock the body's Z axis movement. </member> <member name="collision/safe_margin" type="float" setter="set_safe_margin" getter="get_safe_margin" default="0.001"> - If the body is at least this close to another body, this body will consider them to be colliding. + Extra margin used for collision recovery in motion functions (see [method move_and_collide], [method move_and_slide], [method move_and_slide_with_snap]). + If the body is at least this close to another body, it will consider them to be colliding and will be pushed away before performing the actual motion. + A higher value means it's more flexible for detecting collision, which helps with consistently detecting walls and floors. + A lower value forces the collision algorithm to use more exact detection, so it can be used in cases that specifically require precision, e.g at very low scale to avoid visible jittering, or for stability with a stack of kinematic bodies. </member> </members> <constants> diff --git a/doc/classes/Label.xml b/doc/classes/Label.xml index 8574ff9836..76b9686393 100644 --- a/doc/classes/Label.xml +++ b/doc/classes/Label.xml @@ -32,7 +32,7 @@ </argument> <description> Returns the height of the line [code]line[/code]. - If [code]line[/code] is set to [code]-1[/code], returns biggest line height. + If [code]line[/code] is set to [code]-1[/code], returns the biggest line height. If there're no lines returns font size in pixels. </description> </method> diff --git a/doc/classes/Light3D.xml b/doc/classes/Light3D.xml index 6c008e4f7e..6bae612c9f 100644 --- a/doc/classes/Light3D.xml +++ b/doc/classes/Light3D.xml @@ -58,7 +58,7 @@ If [code]true[/code], the light's effect is reversed, darkening areas and casting bright shadows. </member> <member name="light_projector" type="Texture2D" setter="set_projector" getter="get_projector"> - [Texture2D] projected by light. [member shadow_enabled] must be on for the projector to work. Light projectors make the light appear as if it is shining through a colored but transparent object, almost like light shining through stained glass. + [Texture2D] projected by light. [member shadow_enabled] must be on for the projector to work. Light projectors make the light appear as if it is shining through a colored but transparent object, almost like light shining through stained-glass. </member> <member name="light_size" type="float" setter="set_param" getter="get_param" default="0.0"> The size of the light in Godot units. Only available for [OmniLight3D]s and [SpotLight3D]s. Increasing this value will make the light fade out slower and shadows appear blurrier. This can be used to simulate area lights to an extent. @@ -78,7 +78,7 @@ <member name="shadow_enabled" type="bool" setter="set_shadow" getter="has_shadow" default="false"> If [code]true[/code], the light will cast shadows. </member> - <member name="shadow_fog_fade" type="float" setter="set_param" getter="get_param" default="1.0"> + <member name="shadow_fog_fade" type="float" setter="set_param" getter="get_param" default="0.1"> </member> <member name="shadow_normal_bias" type="float" setter="set_param" getter="get_param" default="2.0"> Offsets the lookup into the shadow map by the object's normal. This can be used to reduce self-shadowing artifacts without using [member shadow_bias]. In practice, this value should be tweaked along with [member shadow_bias] to reduce artifacts as much as possible. diff --git a/doc/classes/LineEdit.xml b/doc/classes/LineEdit.xml index 790bf58359..360f5c451e 100644 --- a/doc/classes/LineEdit.xml +++ b/doc/classes/LineEdit.xml @@ -380,21 +380,27 @@ <theme_item name="font_color" type="Color" default="Color( 0.88, 0.88, 0.88, 1 )"> Default font color. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [LineEdit]. + </theme_item> <theme_item name="font_selected_color" type="Color" default="Color( 0, 0, 0, 1 )"> Font color for selected text (inside the selection rectangle). </theme_item> - <theme_item name="font_uneditable_color" type="Color" default="Color( 0.88, 0.88, 0.88, 0.5 )"> - Font color when editing is disabled. - </theme_item> <theme_item name="font_size" type="int"> Font size of the [LineEdit]'s text. </theme_item> - <theme_item name="minimum_spaces" type="int" default="12"> - Minimum horizontal space for the text (not counting the clear button and content margins). This value is measured in count of space characters (i.e. this amount of space characters can be displayed without scrolling). + <theme_item name="font_uneditable_color" type="Color" default="Color( 0.88, 0.88, 0.88, 0.5 )"> + Font color when editing is disabled. + </theme_item> + <theme_item name="minimum_character_width" type="int" default="4"> + Minimum horizontal space for the text (not counting the clear button and content margins). This value is measured in count of 'M' characters (i.e. this amount of 'M' characters can be displayed without scrolling). </theme_item> <theme_item name="normal" type="StyleBox"> Default background for the [LineEdit]. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="read_only" type="StyleBox"> Background used when [LineEdit] is in read-only mode ([member editable] is set to [code]false[/code]). </theme_item> diff --git a/doc/classes/LinkButton.xml b/doc/classes/LinkButton.xml index 0227870152..6e2f4399b3 100644 --- a/doc/classes/LinkButton.xml +++ b/doc/classes/LinkButton.xml @@ -84,12 +84,18 @@ <theme_item name="font_hover_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> Text [Color] used when the [LinkButton] is being hovered. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [LinkButton]. + </theme_item> <theme_item name="font_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> Text [Color] used when the [LinkButton] is being pressed. </theme_item> <theme_item name="font_size" type="int"> Font size of the [LinkButton]'s text. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="underline_spacing" type="int" default="2"> The vertical space between the baseline of text and the underline. </theme_item> diff --git a/doc/classes/MarginContainer.xml b/doc/classes/MarginContainer.xml index c8eebd4677..a51632d5f1 100644 --- a/doc/classes/MarginContainer.xml +++ b/doc/classes/MarginContainer.xml @@ -5,21 +5,23 @@ </brief_description> <description> Adds a top, left, bottom, and right margin to all [Control] nodes that are direct children of the container. To control the [MarginContainer]'s margin, use the [code]margin_*[/code] theme properties listed below. - [b]Note:[/b] Be careful, [Control] margin values are different than the constant margin values. If you want to change the custom margin values of the [MarginContainer] by code, you should use the following examples: + [b]Note:[/b] Be careful, [Control] margin values are different from the constant margin values. If you want to change the custom margin values of the [MarginContainer] by code, you should use the following examples: [codeblocks] [gdscript] + # This code sample assumes the current script is extending MarginContainer. var margin_value = 100 - set("custom_constants/margin_top", margin_value) - set("custom_constants/margin_left", margin_value) - set("custom_constants/margin_bottom", margin_value) - set("custom_constants/margin_right", margin_value) + add_theme_constant_override("margin_top", margin_value) + add_theme_constant_override("margin_left", margin_value) + add_theme_constant_override("margin_bottom", margin_value) + add_theme_constant_override("margin_right", margin_value) [/gdscript] [csharp] + // This code sample assumes the current script is extending MarginContainer. int marginValue = 100; - Set("custom_constants/margin_top", marginValue); - Set("custom_constants/margin_left", marginValue); - Set("custom_constants/margin_bottom", marginValue); - Set("custom_constants/margin_right", marginValue); + AddThemeConstantOverride("margin_top", marginValue); + AddThemeConstantOverride("margin_left", marginValue); + AddThemeConstantOverride("margin_bottom", marginValue); + AddThemeConstantOverride("margin_right", marginValue); [/csharp] [/codeblocks] </description> diff --git a/doc/classes/Material.xml b/doc/classes/Material.xml index 10a7061bef..0d287a5d1d 100644 --- a/doc/classes/Material.xml +++ b/doc/classes/Material.xml @@ -11,6 +11,12 @@ <link title="Third Person Shooter Demo">https://godotengine.org/asset-library/asset/678</link> </tutorials> <methods> + <method name="inspect_native_shader_code"> + <return type="void"> + </return> + <description> + </description> + </method> </methods> <members> <member name="next_pass" type="Material" setter="set_next_pass" getter="get_next_pass"> diff --git a/doc/classes/MenuButton.xml b/doc/classes/MenuButton.xml index 1e8874fdc5..7cbf9d3dfe 100644 --- a/doc/classes/MenuButton.xml +++ b/doc/classes/MenuButton.xml @@ -5,7 +5,7 @@ </brief_description> <description> Special button that brings up a [PopupMenu] when clicked. - New items can be created inside this [PopupMenu] using [code]get_popup().add_item("My Item Name")[/code]. You can also create them directly from the editor. To do so, select the [MenuButton] node, then in the toolbar at the top of the 2D editor, click [b]Items[/b] then click [b]Add[/b] in the popup. You will be able to give each items new properties. + New items can be created inside this [PopupMenu] using [code]get_popup().add_item("My Item Name")[/code]. You can also create them directly from the editor. To do so, select the [MenuButton] node, then in the toolbar at the top of the 2D editor, click [b]Items[/b] then click [b]Add[/b] in the popup. You will be able to give each item new properties. See also [BaseButton] which contains common properties and methods associated with this node. </description> <tutorials> @@ -65,6 +65,9 @@ <theme_item name="font_hover_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> Text [Color] used when the [MenuButton] is being hovered. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [MenuButton]. + </theme_item> <theme_item name="font_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> Text [Color] used when the [MenuButton] is being pressed. </theme_item> @@ -80,6 +83,9 @@ <theme_item name="normal" type="StyleBox"> Default [StyleBox] for the [MenuButton]. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="pressed" type="StyleBox"> [StyleBox] used when the [MenuButton] is being pressed. </theme_item> diff --git a/doc/classes/MultiMesh.xml b/doc/classes/MultiMesh.xml index 6ebfc946dc..2adebdb306 100644 --- a/doc/classes/MultiMesh.xml +++ b/doc/classes/MultiMesh.xml @@ -6,7 +6,7 @@ <description> MultiMesh provides low-level mesh instancing. Drawing thousands of [MeshInstance3D] nodes can be slow, since each object is submitted to the GPU then drawn individually. MultiMesh is much faster as it can draw thousands of instances with a single draw call, resulting in less API overhead. - As a drawback, if the instances are too far away of each other, performance may be reduced as every single instance will always rendered (they are spatially indexed as one, for the whole object). + As a drawback, if the instances are too far away of each other, performance may be reduced as every single instance will always render (they are spatially indexed as one, for the whole object). Since instances may have any behavior, the AABB used for visibility must be provided by the user. </description> <tutorials> diff --git a/doc/classes/Navigation2D.xml b/doc/classes/Navigation2D.xml deleted file mode 100644 index abac29bdb7..0000000000 --- a/doc/classes/Navigation2D.xml +++ /dev/null @@ -1,59 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="Navigation2D" inherits="Node2D" version="4.0"> - <brief_description> - 2D navigation and pathfinding node. - </brief_description> - <description> - Navigation2D provides navigation and pathfinding within a 2D area, specified as a collection of [NavigationPolygon] resources. These are automatically collected from child [NavigationRegion2D] nodes. - </description> - <tutorials> - <link title="2D Navigation Demo">https://godotengine.org/asset-library/asset/117</link> - </tutorials> - <methods> - <method name="get_closest_point" qualifiers="const"> - <return type="Vector2"> - </return> - <argument index="0" name="to_point" type="Vector2"> - </argument> - <description> - Returns the point closest to the provided [code]to_point[/code] on the navigation mesh surface. - </description> - </method> - <method name="get_closest_point_owner" qualifiers="const"> - <return type="RID"> - </return> - <argument index="0" name="to_point" type="Vector2"> - </argument> - <description> - Returns the owner region RID for the point returned by [method get_closest_point]. - </description> - </method> - <method name="get_rid" qualifiers="const"> - <return type="RID"> - </return> - <description> - </description> - </method> - <method name="get_simple_path" qualifiers="const"> - <return type="PackedVector2Array"> - </return> - <argument index="0" name="start" type="Vector2"> - </argument> - <argument index="1" name="end" type="Vector2"> - </argument> - <argument index="2" name="optimize" type="bool" default="true"> - </argument> - <description> - Returns the path between two given points. Points are in local coordinate space. If [code]optimize[/code] is [code]true[/code] (the default), the path is smoothed by merging path segments where possible. - </description> - </method> - </methods> - <members> - <member name="cell_size" type="float" setter="set_cell_size" getter="get_cell_size" default="10.0"> - </member> - <member name="edge_connection_margin" type="float" setter="set_edge_connection_margin" getter="get_edge_connection_margin" default="100.0"> - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/Navigation3D.xml b/doc/classes/Navigation3D.xml deleted file mode 100644 index e7a4fe3c43..0000000000 --- a/doc/classes/Navigation3D.xml +++ /dev/null @@ -1,84 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="Navigation3D" inherits="Node3D" version="4.0"> - <brief_description> - Mesh-based navigation and pathfinding node. - </brief_description> - <description> - Provides navigation and pathfinding within a collection of [NavigationMesh]es. These will be automatically collected from child [NavigationRegion3D] nodes. In addition to basic pathfinding, this class also assists with aligning navigation agents with the meshes they are navigating on. - </description> - <tutorials> - <link title="3D Navmesh Demo">https://godotengine.org/asset-library/asset/124</link> - </tutorials> - <methods> - <method name="get_closest_point" qualifiers="const"> - <return type="Vector3"> - </return> - <argument index="0" name="to_point" type="Vector3"> - </argument> - <description> - Returns the point closest to the provided [code]to_point[/code] on the navigation mesh surface. - </description> - </method> - <method name="get_closest_point_normal" qualifiers="const"> - <return type="Vector3"> - </return> - <argument index="0" name="to_point" type="Vector3"> - </argument> - <description> - Returns the normal for the point returned by [method get_closest_point]. - </description> - </method> - <method name="get_closest_point_owner" qualifiers="const"> - <return type="RID"> - </return> - <argument index="0" name="to_point" type="Vector3"> - </argument> - <description> - Returns the owner region RID for the point returned by [method get_closest_point]. - </description> - </method> - <method name="get_closest_point_to_segment" qualifiers="const"> - <return type="Vector3"> - </return> - <argument index="0" name="start" type="Vector3"> - </argument> - <argument index="1" name="end" type="Vector3"> - </argument> - <argument index="2" name="use_collision" type="bool" default="false"> - </argument> - <description> - Returns the closest point between the navigation surface and the segment. - </description> - </method> - <method name="get_rid" qualifiers="const"> - <return type="RID"> - </return> - <description> - </description> - </method> - <method name="get_simple_path" qualifiers="const"> - <return type="PackedVector3Array"> - </return> - <argument index="0" name="start" type="Vector3"> - </argument> - <argument index="1" name="end" type="Vector3"> - </argument> - <argument index="2" name="optimize" type="bool" default="true"> - </argument> - <description> - Returns the path between two given points. Points are in local coordinate space. If [code]optimize[/code] is [code]true[/code] (the default), the agent properties associated with each [NavigationMesh] (radius, height, etc.) are considered in the path calculation, otherwise they are ignored. - </description> - </method> - </methods> - <members> - <member name="cell_size" type="float" setter="set_cell_size" getter="get_cell_size" default="0.3"> - </member> - <member name="edge_connection_margin" type="float" setter="set_edge_connection_margin" getter="get_edge_connection_margin" default="5.0"> - </member> - <member name="up_vector" type="Vector3" setter="set_up_vector" getter="get_up_vector" default="Vector3( 0, 1, 0 )"> - Defines which direction is up. By default, this is [code](0, 1, 0)[/code], which is the world's "up" direction. - </member> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/NavigationAgent2D.xml b/doc/classes/NavigationAgent2D.xml index 5a9c31ef67..1060e2de41 100644 --- a/doc/classes/NavigationAgent2D.xml +++ b/doc/classes/NavigationAgent2D.xml @@ -4,7 +4,7 @@ 2D Agent used in navigation for collision avoidance. </brief_description> <description> - 2D Agent that is used in navigation to reach a location while avoiding static and dynamic obstacles. The dynamic obstacles are avoided using RVO collision avoidance. The agent needs navigation data to work correctly. This can be done by having the agent as a child of a [Navigation2D] node, or using [method set_navigation]. [NavigationAgent2D] is physics safe. + 2D Agent that is used in navigation to reach a location while avoiding static and dynamic obstacles. The dynamic obstacles are avoided using RVO collision avoidance. The agent needs navigation data to work correctly. [NavigationAgent2D] is physics safe. </description> <tutorials> </tutorials> @@ -37,13 +37,6 @@ Returns which index the agent is currently on in the navigation path's [PackedVector2Array]. </description> </method> - <method name="get_navigation" qualifiers="const"> - <return type="Node"> - </return> - <description> - Returns the [Navigation2D] node that the agent is using for its navigation system. - </description> - </method> <method name="get_next_location"> <return type="Vector2"> </return> @@ -79,15 +72,6 @@ Returns true if the target location is reached. The target location is set using [method set_target_location]. It may not always be possible to reach the target location. It should always be possible to reach the final location though. See [method get_final_location]. </description> </method> - <method name="set_navigation"> - <return type="void"> - </return> - <argument index="0" name="navigation" type="Node"> - </argument> - <description> - Sets the [Navigation2D] node used by the agent. Useful when you don't want to make the agent a child of a [Navigation2D] node. - </description> - </method> <method name="set_target_location"> <return type="void"> </return> @@ -127,7 +111,7 @@ The distance threshold before a target is considered to be reached. This will allow an agent to not have to hit a point on the path exactly, but in the area. </member> <member name="time_horizon" type="float" setter="set_time_horizon" getter="get_time_horizon" default="20.0"> - The minimal amount of time for which this agent's velocities, that are computed with the collision avoidance algorithim, are safe with respect to other agents. The larger the number, the sooner the agent will respond to other agents, but less freedom in choosing its velocities. Must be positive. + The minimal amount of time for which this agent's velocities, that are computed with the collision avoidance algorithm, are safe with respect to other agents. The larger the number, the sooner the agent will respond to other agents, but less freedom in choosing its velocities. Must be positive. </member> </members> <signals> diff --git a/doc/classes/NavigationAgent3D.xml b/doc/classes/NavigationAgent3D.xml index f9df1d390b..00e9db0a33 100644 --- a/doc/classes/NavigationAgent3D.xml +++ b/doc/classes/NavigationAgent3D.xml @@ -4,7 +4,7 @@ 3D Agent used in navigation for collision avoidance. </brief_description> <description> - 3D Agent that is used in navigation to reach a location while avoiding static and dynamic obstacles. The dynamic obstacles are avoided using RVO collision avoidance. The agent needs navigation data to work correctly. This can be done by having the agent as a child of a [Navigation3D] node, or using [method set_navigation]. [NavigationAgent3D] is physics safe. + 3D Agent that is used in navigation to reach a location while avoiding static and dynamic obstacles. The dynamic obstacles are avoided using RVO collision avoidance. The agent needs navigation data to work correctly. [NavigationAgent3D] is physics safe. </description> <tutorials> </tutorials> @@ -37,13 +37,6 @@ Returns which index the agent is currently on in the navigation path's [PackedVector3Array]. </description> </method> - <method name="get_navigation" qualifiers="const"> - <return type="Node"> - </return> - <description> - Returns the [Navigation3D] node that the agent is using for its navigation system. - </description> - </method> <method name="get_next_location"> <return type="Vector3"> </return> @@ -79,15 +72,6 @@ Returns true if the target location is reached. The target location is set using [method set_target_location]. It may not always be possible to reach the target location. It should always be possible to reach the final location though. See [method get_final_location]. </description> </method> - <method name="set_navigation"> - <return type="void"> - </return> - <argument index="0" name="navigation" type="Node"> - </argument> - <description> - Sets the [Navigation3D] node used by the agent. Useful when you don't want to make the agent a child of a [Navigation3D] node. - </description> - </method> <method name="set_target_location"> <return type="void"> </return> @@ -133,7 +117,7 @@ The distance threshold before a target is considered to be reached. This will allow an agent to not have to hit a point on the path exactly, but in the area. </member> <member name="time_horizon" type="float" setter="set_time_horizon" getter="get_time_horizon" default="5.0"> - The minimal amount of time for which this agent's velocities, that are computed with the collision avoidance algorithim, are safe with respect to other agents. The larger the number, the sooner the agent will respond to other agents, but less freedom in choosing its velocities. Must be positive. + The minimal amount of time for which this agent's velocities, that are computed with the collision avoidance algorithm, are safe with respect to other agents. The larger the number, the sooner the agent will respond to other agents, but less freedom in choosing its velocities. Must be positive. </member> </members> <signals> diff --git a/doc/classes/NavigationMesh.xml b/doc/classes/NavigationMesh.xml index dd7464ac0e..871c92798a 100644 --- a/doc/classes/NavigationMesh.xml +++ b/doc/classes/NavigationMesh.xml @@ -79,6 +79,7 @@ </methods> <members> <member name="agent/height" type="float" setter="set_agent_height" getter="get_agent_height" default="2.0"> + The minimum Y space needed for navigation to be generated. </member> <member name="agent/max_climb" type="float" setter="set_agent_max_climb" getter="get_agent_max_climb" default="0.9"> The maximum height difference between two areas for navigation to be generated between them. @@ -87,8 +88,10 @@ The maximum angle a slope can be at for navigation to be generated on it. </member> <member name="agent/radius" type="float" setter="set_agent_radius" getter="get_agent_radius" default="0.6"> + Determines where the edge of a navigation mesh is. This way an agent will not overlap with another mesh or stand over nothing. </member> <member name="cell/height" type="float" setter="set_cell_height" getter="get_cell_height" default="0.2"> + The height of a cell. </member> <member name="cell/size" type="float" setter="set_cell_size" getter="get_cell_size" default="0.3"> The size of cells in the [NavigationMesh]. @@ -111,7 +114,7 @@ The physics layers used to generate the [NavigationMesh]. </member> <member name="geometry/parsed_geometry_type" type="int" setter="set_parsed_geometry_type" getter="get_parsed_geometry_type" default="0"> - What kind of geomerty is used to generate the [NavigationMesh]. + What kind of geometry is used to generate the [NavigationMesh]. </member> <member name="geometry/source_geometry_mode" type="int" setter="set_source_geometry_mode" getter="get_source_geometry_mode" default="0"> Which geometry is used to generate the [NavigationMesh]. diff --git a/doc/classes/NavigationObstacle2D.xml b/doc/classes/NavigationObstacle2D.xml index ddd96975f1..2e94eb0bba 100644 --- a/doc/classes/NavigationObstacle2D.xml +++ b/doc/classes/NavigationObstacle2D.xml @@ -4,27 +4,11 @@ 2D Obstacle used in navigation for collision avoidance. </brief_description> <description> - 2D Obstacle used in navigation for collision avoidance. The obstacle needs navigation data to work correctly. This can be done by having the obstacle as a child of a [Navigation2D] node, or using [method set_navigation]. [NavigationObstacle2D] is physics safe. + 2D Obstacle used in navigation for collision avoidance. The obstacle needs navigation data to work correctly. [NavigationObstacle2D] is physics safe. </description> <tutorials> </tutorials> <methods> - <method name="get_navigation" qualifiers="const"> - <return type="Node"> - </return> - <description> - Returns the [Navigation2D] node that the obstacle is using for its navigation system. - </description> - </method> - <method name="set_navigation"> - <return type="void"> - </return> - <argument index="0" name="navigation" type="Node"> - </argument> - <description> - Sets the [Navigation2D] node used by the obstacle. Useful when you don't want to make the obstacle a child of a [Navigation2D] node. - </description> - </method> </methods> <constants> </constants> diff --git a/doc/classes/NavigationObstacle3D.xml b/doc/classes/NavigationObstacle3D.xml index e01a40ed73..d7454a7bea 100644 --- a/doc/classes/NavigationObstacle3D.xml +++ b/doc/classes/NavigationObstacle3D.xml @@ -4,27 +4,11 @@ 3D Obstacle used in navigation for collision avoidance. </brief_description> <description> - 3D Obstacle used in navigation for collision avoidance. The obstacle needs navigation data to work correctly. This can be done by having the obstacle as a child of a [Navigation3D] node, or using [method set_navigation]. [NavigationObstacle3D] is physics safe. + 3D Obstacle used in navigation for collision avoidance. The obstacle needs navigation data to work correctly. [NavigationObstacle3D] is physics safe. </description> <tutorials> </tutorials> <methods> - <method name="get_navigation" qualifiers="const"> - <return type="Node"> - </return> - <description> - Returns the [Navigation3D] node that the obstacle is using for its navigation system. - </description> - </method> - <method name="set_navigation"> - <return type="void"> - </return> - <argument index="0" name="navigation" type="Node"> - </argument> - <description> - Sets the [Navigation3D] node used by the obstacle. Useful when you don't want to make the obstacle a child of a [Navigation3D] node. - </description> - </method> </methods> <constants> </constants> diff --git a/doc/classes/NavigationRegion2D.xml b/doc/classes/NavigationRegion2D.xml index aef114e1db..33a3f04c3d 100644 --- a/doc/classes/NavigationRegion2D.xml +++ b/doc/classes/NavigationRegion2D.xml @@ -1,8 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="NavigationRegion2D" inherits="Node2D" version="4.0"> <brief_description> + A region of the 2D navigation map. </brief_description> <description> + A region of the navigation map. It tells the [NavigationServer2D] what can be navigated and what cannot, based on its [NavigationPolygon] resource. + Two regions can be connected to each other if they share a similar edge. You can set the minimum distance between two vertices required to connect two edges by using [method NavigationServer2D.map_set_edge_connection_margin]. + [b]Note:[/b] Overlapping two regions' polygons is not enough for connecting two regions. They must share a similar edge. </description> <tutorials> </tutorials> @@ -10,8 +14,13 @@ </methods> <members> <member name="enabled" type="bool" setter="set_enabled" getter="is_enabled" default="true"> + Determines if the [NavigationRegion2D] is enabled or disabled. + </member> + <member name="layers" type="int" setter="set_layers" getter="get_layers" default="1"> + A bitfield determining all layers the region belongs to. These layers can be checked upon when requesting a path with [method NavigationServer2D.map_get_path]. </member> <member name="navpoly" type="NavigationPolygon" setter="set_navigation_polygon" getter="get_navigation_polygon"> + The [NavigationPolygon] resource to use. </member> </members> <constants> diff --git a/doc/classes/NavigationRegion3D.xml b/doc/classes/NavigationRegion3D.xml index b70bfb6596..2904ba4200 100644 --- a/doc/classes/NavigationRegion3D.xml +++ b/doc/classes/NavigationRegion3D.xml @@ -4,7 +4,8 @@ A region of the navigation map. </brief_description> <description> - A region of the navigation map. It tells the [Navigation3D] node what can be navigated and what cannot, based on the [NavigationMesh] resource. This should be a child of a [Navigation3D] node (even not a direct child). + A region of the navigation map. It tells the [NavigationServer3D] what can be navigated and what cannot, based on its [NavigationMesh] resource. + Two regions can be connected to each other if they share a similar edge. You can set the minimum distance between two vertices required to connect two edges by using [method NavigationServer3D.map_set_edge_connection_margin]. </description> <tutorials> </tutorials> @@ -21,6 +22,9 @@ <member name="enabled" type="bool" setter="set_enabled" getter="is_enabled" default="true"> Determines if the [NavigationRegion3D] is enabled or disabled. </member> + <member name="layers" type="int" setter="set_layers" getter="get_layers" default="1"> + A bitfield determining all layers the region belongs to. These layers can be checked upon when requesting a path with [method NavigationServer3D.map_get_path]. + </member> <member name="navmesh" type="NavigationMesh" setter="set_navigation_mesh" getter="get_navigation_mesh"> The [NavigationMesh] resource to use. </member> diff --git a/doc/classes/NavigationServer2D.xml b/doc/classes/NavigationServer2D.xml index 5f0b04487e..b0a57ed227 100644 --- a/doc/classes/NavigationServer2D.xml +++ b/doc/classes/NavigationServer2D.xml @@ -4,7 +4,12 @@ Server interface for low-level 2D navigation access </brief_description> <description> - NavigationServer2D is the server responsible for all 2D navigation. It creates the agents, maps, and regions for navigation to work as expected. This keeps tracks of any call and executes them during the sync phase. This means that you can request any change to the map, using any thread, without worrying. + NavigationServer2D is the server responsible for all 2D navigation. It handles several objects, namely maps, regions and agents. + Maps are made up of regions, which are made of navigation polygons. Together, they define the navigable areas in the 2D world. For two regions to be connected to each other, they must share a similar edge. An edge is considered connected to another if both of its two vertices are at a distance less than [code]edge_connection_margin[/code] to the respective other edge's vertex. + You may assign navigation layers to regions with [method NavigationServer2D.region_set_layers], which then can be checked upon when requesting a path with [method NavigationServer2D.map_get_path]. This allows allowing or forbidding some areas to 2D objects. + To use the collision avoidance system, you may use agents. You can set an agent's target velocity, then the servers will emit a callback with a modified velocity. + [b]Note:[/b] the collision avoidance system ignores regions. Using the modified velocity as-is might lead to pushing and agent outside of a navigable area. This is a limitation of the collision avoidance system, any more complex situation may require the use of the physics engine. + This server keeps tracks of any call and executes them during the sync phase. This means that you can request any change to the map, using any thread, without worrying. </description> <tutorials> <link title="2D Navigation Demo">https://godotengine.org/asset-library/asset/117</link> @@ -207,8 +212,10 @@ </argument> <argument index="3" name="optimize" type="bool"> </argument> + <argument index="4" name="layers" type="int" default="1"> + </argument> <description> - Returns the navigation path to reach the destination from the origin, while avoiding static obstacles. + Returns the navigation path to reach the destination from the origin. [code]layers[/code] is a bitmask of all region layers that are allowed to be in the path. </description> </method> <method name="map_is_active" qualifiers="const"> @@ -260,6 +267,57 @@ Creates a new region. </description> </method> + <method name="region_get_connection_pathway_end" qualifiers="const"> + <return type="Vector2"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <argument index="1" name="connection" type="int"> + </argument> + <description> + Returns the ending point of a connection door. [code]connection[/code] is an index between 0 and the return value of [method region_get_connections_count]. + </description> + </method> + <method name="region_get_connection_pathway_start" qualifiers="const"> + <return type="Vector2"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <argument index="1" name="connection" type="int"> + </argument> + <description> + Returns the starting point of a connection door. [code]connection[/code] is an index between 0 and the return value of [method region_get_connections_count]. + </description> + </method> + <method name="region_get_connections_count" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <description> + Returns how many connections this [code]region[/code] has with other regions in the map. + </description> + </method> + <method name="region_get_layers" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <description> + Returns the region's layers. + </description> + </method> + <method name="region_set_layers" qualifiers="const"> + <return type="void"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <argument index="1" name="layers" type="int"> + </argument> + <description> + Set the region's layers. This allows selecting regions from a path request (when using [method NavigationServer2D.map_get_path]). + </description> + </method> <method name="region_set_map" qualifiers="const"> <return type="void"> </return> @@ -294,6 +352,15 @@ </description> </method> </methods> + <signals> + <signal name="map_changed"> + <argument index="0" name="map" type="RID"> + </argument> + <description> + Emitted when a navigation map is updated, when a region moves or is modified. + </description> + </signal> + </signals> <constants> </constants> </class> diff --git a/doc/classes/NavigationServer3D.xml b/doc/classes/NavigationServer3D.xml index 95890c4b4c..b098a7fc20 100644 --- a/doc/classes/NavigationServer3D.xml +++ b/doc/classes/NavigationServer3D.xml @@ -4,7 +4,12 @@ Server interface for low-level 3D navigation access </brief_description> <description> - NavigationServer3D is the server responsible for all 3D navigation. It creates the agents, maps, and regions for navigation to work as expected. This keeps tracks of any call and executes them during the sync phase. This means that you can request any change to the map, using any thread, without worrying. + NavigationServer3D is the server responsible for all 3D navigation. It handles several objects, namely maps, regions and agents. + Maps are made up of regions, which are made of navigation meshes. Together, they define the navigable areas in the 3D world. For two regions to be connected to each other, they must share a similar edge. An edge is considered connected to another if both of its two vertices are at a distance less than [code]edge_connection_margin[/code] to the respective other edge's vertex. + You may assign navigation layers to regions with [method NavigationServer3D.region_set_layers], which then can be checked upon when requesting a path with [method NavigationServer3D.map_get_path]. This allows allowing or forbidding some areas to 3D objects. + To use the collision avoidance system, you may use agents. You can set an agent's target velocity, then the servers will emit a callback with a modified velocity. + [b]Note:[/b] the collision avoidance system ignores regions. Using the modified velocity as-is might lead to pushing and agent outside of a navigable area. This is a limitation of the collision avoidance system, any more complex situation may require the use of the physics engine. + This server keeps tracks of any call and executes them during the sync phase. This means that you can request any change to the map, using any thread, without worrying. </description> <tutorials> <link title="3D Navmesh Demo">https://godotengine.org/asset-library/asset/124</link> @@ -219,7 +224,7 @@ <argument index="0" name="map" type="RID"> </argument> <description> - Returns the edge connection margin of the map. + Returns the edge connection margin of the map. This distance is the minimum vertex distance needed to connect two edges from different regions. </description> </method> <method name="map_get_path" qualifiers="const"> @@ -233,8 +238,10 @@ </argument> <argument index="3" name="optimize" type="bool"> </argument> + <argument index="4" name="layers" type="int" default="1"> + </argument> <description> - Returns the navigation path to reach the destination from the origin. + Returns the navigation path to reach the destination from the origin. [code]layers[/code] is a bitmask of all region layers that are allowed to be in the path. </description> </method> <method name="map_get_up" qualifiers="const"> @@ -285,7 +292,7 @@ <argument index="1" name="margin" type="float"> </argument> <description> - Set the map edge connection margein used to weld the compatible region edges. + Set the map edge connection margin used to weld the compatible region edges. </description> </method> <method name="map_set_up" qualifiers="const"> @@ -328,6 +335,57 @@ Creates a new region. </description> </method> + <method name="region_get_connection_pathway_end" qualifiers="const"> + <return type="Vector3"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <argument index="1" name="connection" type="int"> + </argument> + <description> + Returns the ending point of a connection door. [code]connection[/code] is an index between 0 and the return value of [method region_get_connections_count]. + </description> + </method> + <method name="region_get_connection_pathway_start" qualifiers="const"> + <return type="Vector3"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <argument index="1" name="connection" type="int"> + </argument> + <description> + Returns the starting point of a connection door. [code]connection[/code] is an index between 0 and the return value of [method region_get_connections_count]. + </description> + </method> + <method name="region_get_connections_count" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <description> + Returns how many connections this [code]region[/code] has with other regions in the map. + </description> + </method> + <method name="region_get_layers" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <description> + Returns the region's layers. + </description> + </method> + <method name="region_set_layers" qualifiers="const"> + <return type="void"> + </return> + <argument index="0" name="region" type="RID"> + </argument> + <argument index="1" name="layers" type="int"> + </argument> + <description> + Set the region's layers. This allows selecting regions from a path request (when using [method NavigationServer3D.map_get_path]). + </description> + </method> <method name="region_set_map" qualifiers="const"> <return type="void"> </return> @@ -371,6 +429,15 @@ </description> </method> </methods> + <signals> + <signal name="map_changed"> + <argument index="0" name="map" type="RID"> + </argument> + <description> + Emitted when a navigation map is updated, when a region moves or is modified. + </description> + </signal> + </signals> <constants> </constants> </class> diff --git a/doc/classes/Node.xml b/doc/classes/Node.xml index e8913f2623..7750d45226 100644 --- a/doc/classes/Node.xml +++ b/doc/classes/Node.xml @@ -128,7 +128,7 @@ </argument> <description> Adds a child node. Nodes can have any number of children, but every child must have a unique name. Child nodes are automatically deleted when the parent node is deleted, so an entire scene can be removed by deleting its topmost node. - If [code]legible_unique_name[/code] is [code]true[/code], the child node will have an human-readable name based on the name of the node being instanced instead of its type. + If [code]legible_unique_name[/code] is [code]true[/code], the child node will have a human-readable name based on the name of the node being instanced instead of its type. [b]Note:[/b] If the child node already has a parent, the function will fail. Use [method remove_child] first to remove the node from its current parent. For example: [codeblocks] [gdscript] @@ -158,8 +158,8 @@ <argument index="1" name="legible_unique_name" type="bool" default="false"> </argument> <description> - Adds a [code]sibling[/code] node to current's node parent, at the the same level as that node, right below it. - If [code]legible_unique_name[/code] is [code]true[/code], the child node will have an human-readable name based on the name of the node being instanced instead of its type. + Adds a [code]sibling[/code] node to current's node parent, at the same level as that node, right below it. + If [code]legible_unique_name[/code] is [code]true[/code], the child node will have a human-readable name based on the name of the node being instanced instead of its type. Use [method add_child] instead of this method if you don't need the child node to be added below a specific node in the list of children. </description> </method> @@ -179,7 +179,7 @@ <return type="bool"> </return> <description> - Returns [code]true[/code] if the node can process while the scene tree is paused (see [member pause_mode]). Always returns [code]true[/code] if the scene tree is not paused, and [code]false[/code] if the node is not in the tree. + Returns [code]true[/code] if the node can process while the scene tree is paused (see [member process_mode]). Always returns [code]true[/code] if the scene tree is not paused, and [code]false[/code] if the node is not in the tree. </description> </method> <method name="duplicate" qualifiers="const"> @@ -245,6 +245,12 @@ Returns an array of references to node's children. </description> </method> + <method name="get_editor_description" qualifiers="const"> + <return type="String"> + </return> + <description> + </description> + </method> <method name="get_groups" qualifiers="const"> <return type="Array"> </return> @@ -623,10 +629,11 @@ </return> <argument index="0" name="node" type="Node"> </argument> - <argument index="1" name="keep_data" type="bool" default="false"> + <argument index="1" name="keep_groups" type="bool" default="false"> </argument> <description> Replaces a node in a scene by the given one. Subscriptions that pass through this node will be lost. + If [code]keep_groups[/code] is [code]true[/code], the [code]node[/code] is added to the same groups that the replaced node is in. </description> </method> <method name="request_ready"> @@ -756,6 +763,14 @@ Sets the folded state of the node in the Scene dock. </description> </method> + <method name="set_editor_description"> + <return type="void"> + </return> + <argument index="0" name="editor_description" type="String"> + </argument> + <description> + </description> + </method> <method name="set_network_master"> <return type="void"> </return> @@ -867,8 +882,8 @@ <member name="owner" type="Node" setter="set_owner" getter="get_owner"> The node owner. A node can have any other node as owner (as long as it is a valid parent, grandparent, etc. ascending in the tree). When saving a node (using [PackedScene]), all the nodes it owns will be saved with it. This allows for the creation of complex [SceneTree]s, with instancing and subinstancing. </member> - <member name="pause_mode" type="int" setter="set_pause_mode" getter="get_pause_mode" enum="Node.PauseMode" default="0"> - Pause mode. How the node will behave if the [SceneTree] is paused. + <member name="process_mode" type="int" setter="set_process_mode" getter="get_process_mode" enum="Node.ProcessMode" default="0"> + Can be used to pause or unpause the node, or make the node paused based on the [SceneTree], or make it inherit the process mode from its parent (default). </member> <member name="process_priority" type="int" setter="set_process_priority" getter="get_process_priority" default="0"> The node's priority in the execution order of the enabled processing callbacks (i.e. [constant NOTIFICATION_PROCESS], [constant NOTIFICATION_PHYSICS_PROCESS] and their internal counterparts). Nodes whose process priority value is [i]lower[/i] will have their processing callbacks executed first. @@ -1016,14 +1031,20 @@ <constant name="NOTIFICATION_TEXT_SERVER_CHANGED" value="2018"> Notification received when text server is changed. </constant> - <constant name="PAUSE_MODE_INHERIT" value="0" enum="PauseMode"> - Inherits pause mode from the node's parent. For the root node, it is equivalent to [constant PAUSE_MODE_STOP]. Default. + <constant name="PROCESS_MODE_INHERIT" value="0" enum="ProcessMode"> + Inherits process mode from the node's parent. For the root node, it is equivalent to [constant PROCESS_MODE_PAUSABLE]. Default. + </constant> + <constant name="PROCESS_MODE_PAUSABLE" value="1" enum="ProcessMode"> + Stops processing when the [SceneTree] is paused (process when unpaused). This is the inverse of [constant PROCESS_MODE_WHEN_PAUSED]. + </constant> + <constant name="PROCESS_MODE_WHEN_PAUSED" value="2" enum="ProcessMode"> + Only process when the [SceneTree] is paused (don't process when unpaused). This is the inverse of [constant PROCESS_MODE_PAUSABLE]. </constant> - <constant name="PAUSE_MODE_STOP" value="1" enum="PauseMode"> - Stops processing when the [SceneTree] is paused. + <constant name="PROCESS_MODE_ALWAYS" value="3" enum="ProcessMode"> + Always process. Continue processing always, ignoring the [SceneTree]'s paused property. This is the inverse of [constant PROCESS_MODE_DISABLED]. </constant> - <constant name="PAUSE_MODE_PROCESS" value="2" enum="PauseMode"> - Continue to process regardless of the [SceneTree] pause state. + <constant name="PROCESS_MODE_DISABLED" value="4" enum="ProcessMode"> + Never process. Completely disables processing, ignoring the [SceneTree]'s paused property. This is the inverse of [constant PROCESS_MODE_ALWAYS]. </constant> <constant name="DUPLICATE_SIGNALS" value="1" enum="DuplicateFlags"> Duplicate the node's signals. diff --git a/doc/classes/Node3D.xml b/doc/classes/Node3D.xml index 8b56050058..5c29c0d48f 100644 --- a/doc/classes/Node3D.xml +++ b/doc/classes/Node3D.xml @@ -103,7 +103,7 @@ </return> <argument index="0" name="target" type="Vector3"> </argument> - <argument index="1" name="up" type="Vector3"> + <argument index="1" name="up" type="Vector3" default="Vector3( 0, 1, 0 )"> </argument> <description> Rotates itself so that the local -Z axis points towards the [code]target[/code] position. @@ -118,7 +118,7 @@ </argument> <argument index="1" name="target" type="Vector3"> </argument> - <argument index="2" name="up" type="Vector3"> + <argument index="2" name="up" type="Vector3" default="Vector3( 0, 1, 0 )"> </argument> <description> Moves the node to the specified [code]position[/code], and then rotates itself to point toward the [code]target[/code] as per [method look_at]. Operations take place in global space. diff --git a/doc/classes/NodePath.xml b/doc/classes/NodePath.xml index 36835d9e94..817ccd5160 100644 --- a/doc/classes/NodePath.xml +++ b/doc/classes/NodePath.xml @@ -66,11 +66,11 @@ [/codeblock] </description> </method> - <method name="get_as_property_path"> + <method name="get_as_property_path" qualifiers="const"> <return type="NodePath"> </return> <description> - Returns a node path with a colon character ([code]:[/code]) prepended, transforming it to a pure property path with no node name (defaults to resolving from the from the current node). + Returns a node path with a colon character ([code]:[/code]) prepended, transforming it to a pure property path with no node name (defaults to resolving from the current node). [codeblocks] [gdscript] # This will be parsed as a node path to the "x" property in the "position" node. @@ -89,7 +89,7 @@ [/codeblocks] </description> </method> - <method name="get_concatenated_subnames"> + <method name="get_concatenated_subnames" qualifiers="const"> <return type="StringName"> </return> <description> @@ -106,7 +106,7 @@ [/codeblocks] </description> </method> - <method name="get_name"> + <method name="get_name" qualifiers="const"> <return type="StringName"> </return> <argument index="0" name="idx" type="int"> @@ -129,7 +129,7 @@ [/codeblocks] </description> </method> - <method name="get_name_count"> + <method name="get_name_count" qualifiers="const"> <return type="int"> </return> <description> @@ -137,7 +137,7 @@ For example, [code]"Path2D/PathFollow2D/Sprite2D"[/code] has 3 names. </description> </method> - <method name="get_subname"> + <method name="get_subname" qualifiers="const"> <return type="StringName"> </return> <argument index="0" name="idx" type="int"> @@ -158,7 +158,7 @@ [/codeblocks] </description> </method> - <method name="get_subname_count"> + <method name="get_subname_count" qualifiers="const"> <return type="int"> </return> <description> @@ -166,14 +166,14 @@ For example, [code]"Path2D/PathFollow2D/Sprite2D:texture:load_path"[/code] has 2 subnames. </description> </method> - <method name="is_absolute"> + <method name="is_absolute" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the node path is absolute (as opposed to relative), which means that it starts with a slash character ([code]/[/code]). Absolute node paths can be used to access the root node ([code]"/root"[/code]) or autoloads (e.g. [code]"/global"[/code] if a "global" autoload was registered). </description> </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> diff --git a/doc/classes/OS.xml b/doc/classes/OS.xml index e209fc9ad9..8c90108aef 100644 --- a/doc/classes/OS.xml +++ b/doc/classes/OS.xml @@ -54,7 +54,7 @@ <argument index="0" name="msec" type="int"> </argument> <description> - Delay execution of the current thread by [code]msec[/code] milliseconds. + Delay execution of the current thread by [code]msec[/code] milliseconds. [code]usec[/code] must be greater than or equal to [code]0[/code]. Otherwise, [method delay_msec] will do nothing and will print an error message. </description> </method> <method name="delay_usec" qualifiers="const"> @@ -63,7 +63,7 @@ <argument index="0" name="usec" type="int"> </argument> <description> - Delay execution of the current thread by [code]usec[/code] microseconds. + Delay execution of the current thread by [code]usec[/code] microseconds. [code]usec[/code] must be greater than or equal to [code]0[/code]. Otherwise, [method delay_usec] will do nothing and will print an error message. </description> </method> <method name="dump_memory_to_file"> @@ -136,14 +136,6 @@ Returns the keycode of the given string (e.g. "Escape"). </description> </method> - <method name="get_thread_caller_id" qualifiers="const"> - <return type="int"> - </return> - <description> - Returns the ID of the current thread. This can be used in logs to ease debugging of multi-threaded applications. - [b]Note:[/b] Thread IDs are not deterministic and may be reused across application restarts. - </description> - </method> <method name="get_cmdline_args"> <return type="PackedStringArray"> </return> @@ -215,10 +207,11 @@ <method name="get_environment" qualifiers="const"> <return type="String"> </return> - <argument index="0" name="environment" type="String"> + <argument index="0" name="variable" type="String"> </argument> <description> - Returns an environment variable. + Returns the value of an environment variable. Returns an empty string if the environment variable doesn't exist. + [b]Note:[/b] Double-check the casing of [code]variable[/code]. Environment variable names are case-sensitive on all platforms except Windows. </description> </method> <method name="get_executable_path" qualifiers="const"> @@ -251,9 +244,9 @@ </return> <description> Returns the host OS locale as a string of the form [code]language_Script_COUNTRY_VARIANT@extra[/code]. - [code]language[/code] - 2 or 3 letter [url=https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes]language code[/url], in lower case. - [code]Script[/code] - optional, 4 letter [url=https://en.wikipedia.org/wiki/ISO_15924]script code[/url], in title case. - [code]COUNTRY[/code] - optional, 2 or 3 letter [url=https://en.wikipedia.org/wiki/ISO_3166-1]country code[/url], in upper case. + [code]language[/code] - 2 or 3-letter [url=https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes]language code[/url], in lower case. + [code]Script[/code] - optional, 4-letter [url=https://en.wikipedia.org/wiki/ISO_15924]script code[/url], in title case. + [code]COUNTRY[/code] - optional, 2 or 3-letter [url=https://en.wikipedia.org/wiki/ISO_3166-1]country code[/url], in upper case. [code]VARIANT[/code] - optional, language variant, region and sort order. Variant can have any number of underscored key words. [code]extra[/code] - optional, semicolon separated list of additional key words. Currency, calendar, sort order and numbering system information. </description> @@ -312,22 +305,12 @@ [b]Note:[/b] This method is implemented on Android, Linux, macOS and Windows. </description> </method> - <method name="get_tablet_driver_count" qualifiers="const"> + <method name="get_thread_caller_id" qualifiers="const"> <return type="int"> </return> <description> - Returns the total number of available tablet drivers. - [b]Note:[/b] This method is implemented on Windows. - </description> - </method> - <method name="get_tablet_driver_name" qualifiers="const"> - <return type="String"> - </return> - <argument index="0" name="idx" type="int"> - </argument> - <description> - Returns the tablet driver name for the given index. - [b]Note:[/b] This method is implemented on Windows. + Returns the ID of the current thread. This can be used in logs to ease debugging of multi-threaded applications. + [b]Note:[/b] Thread IDs are not deterministic and may be reused across application restarts. </description> </method> <method name="get_ticks_msec" qualifiers="const"> @@ -372,7 +355,7 @@ <return type="float"> </return> <description> - Returns the current UNIX epoch timestamp. + Returns the current UNIX epoch timestamp in seconds. [b]Important:[/b] This is the system clock that the user can manully set. [b]Never use[/b] this method for precise time calculation since its results are also subject to automatic adjustments by the operating system. [b]Always use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time calculation instead, since they are guaranteed to be monotonic (i.e. never decrease). </description> </method> @@ -384,6 +367,7 @@ <description> Gets an epoch time value from a dictionary of time values. [code]datetime[/code] must be populated with the following keys: [code]year[/code], [code]month[/code], [code]day[/code], [code]hour[/code], [code]minute[/code], [code]second[/code]. + If the dictionary is empty [code]0[/code] is returned. You can pass the output from [method get_datetime_from_unix_time] directly into this function. Daylight Savings Time ([code]dst[/code]), if present, is ignored. </description> </method> @@ -401,10 +385,11 @@ <method name="has_environment" qualifiers="const"> <return type="bool"> </return> - <argument index="0" name="environment" type="String"> + <argument index="0" name="variable" type="String"> </argument> <description> - Returns [code]true[/code] if an environment variable exists. + Returns [code]true[/code] if the environment variable with the name [code]variable[/code] exists. + [b]Note:[/b] Double-check the casing of [code]variable[/code]. Environment variable names are case-sensitive on all platforms except Windows. </description> </method> <method name="has_feature" qualifiers="const"> @@ -519,6 +504,18 @@ [b]Note:[/b] This method is implemented on Android. </description> </method> + <method name="set_environment" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="variable" type="String"> + </argument> + <argument index="1" name="value" type="String"> + </argument> + <description> + Sets the value of the environment variable [code]variable[/code] to [code]value[/code]. The environment variable will be set for the Godot process and any process executed with [method execute] after running [method set_environment]. The environment variable will [i]not[/i] persist to processes run after the Godot process was terminated. + [b]Note:[/b] Double-check the casing of [code]variable[/code]. Environment variable names are case-sensitive on all platforms except Windows. + </description> + </method> <method name="set_thread_name"> <return type="int" enum="Error"> </return> @@ -553,19 +550,12 @@ </method> </methods> <members> - <member name="exit_code" type="int" setter="set_exit_code" getter="get_exit_code" default="0"> - The exit code passed to the OS when the main loop exits. By convention, an exit code of [code]0[/code] indicates success whereas a non-zero exit code indicates an error. For portability reasons, the exit code should be set between 0 and 125 (inclusive). - [b]Note:[/b] This value will be ignored if using [method SceneTree.quit] with an [code]exit_code[/code] argument passed. - </member> <member name="low_processor_usage_mode" type="bool" setter="set_low_processor_usage_mode" getter="is_in_low_processor_usage_mode" default="false"> If [code]true[/code], the engine optimizes for low processor usage by only refreshing the screen if needed. Can improve battery consumption on mobile. </member> <member name="low_processor_usage_mode_sleep_usec" type="int" setter="set_low_processor_usage_mode_sleep_usec" getter="get_low_processor_usage_mode_sleep_usec" default="6900"> The amount of sleeping between frames when the low-processor usage mode is enabled (in microseconds). Higher values will result in lower CPU usage. </member> - <member name="tablet_driver" type="String" setter="set_current_tablet_driver" getter="get_current_tablet_driver" default=""""> - The current tablet driver in use. - </member> </members> <constants> <constant name="VIDEO_DRIVER_GLES2" value="0" enum="VideoDriver"> diff --git a/doc/classes/Object.xml b/doc/classes/Object.xml index 6ff7e34194..7da9c1ac38 100644 --- a/doc/classes/Object.xml +++ b/doc/classes/Object.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="Object" version="4.0"> <brief_description> - Base class for all non built-in types. + Base class for all non-built-in types. </brief_description> <description> Every class which is not a built-in type inherits from this class. @@ -10,11 +10,20 @@ Some classes that extend Object add memory management. This is the case of [Reference], which counts references and deletes itself automatically when no longer referenced. [Node], another fundamental type, deletes all its children when freed from memory. Objects export properties, which are mainly useful for storage and editing, but not really so much in programming. Properties are exported in [method _get_property_list] and handled in [method _get] and [method _set]. However, scripting languages and C++ have simpler means to export them. Property membership can be tested directly in GDScript using [code]in[/code]: - [codeblock] + [codeblocks] + [gdscript] var n = Node2D.new() print("position" in n) # Prints "True". print("other_property" in n) # Prints "False". - [/codeblock] + [/gdscript] + [csharp] + var node = new Node2D(); + // C# has no direct equivalent to GDScript's `in` operator here, but we + // can achieve the same behavior by performing `Get` with a null check. + GD.Print(node.Get("position") != null); // Prints "True". + GD.Print(node.Get("other_property") != null); // Prints "False". + [/csharp] + [/codeblocks] The [code]in[/code] operator will evaluate to [code]true[/code] as long as the key exists, even if the value is [code]null[/code]. Objects also receive notifications. Notifications are a simple way to notify the object about different events, so they can all be handled together. See [method _notification]. [b]Note:[/b] Unlike references to a [Reference], references to an Object stored in a variable can become invalid without warning. Therefore, it's recommended to use [Reference] for data classes instead of [Object]. @@ -96,9 +105,16 @@ </argument> <description> Calls the [code]method[/code] on the object and returns the result. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example: - [codeblock] - call("set", "position", Vector2(42.0, 0.0)) - [/codeblock] + [codeblocks] + [gdscript] + var node = Node2D.new() + node.call("set", "position", Vector2(42, 0)) + [/gdscript] + [csharp] + var node = new Node2D(); + node.Call("set", "position", new Vector2(42, 0)); + [/csharp] + [/codeblocks] [b]Note:[/b] In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase). </description> </method> @@ -109,9 +125,16 @@ </argument> <description> Calls the [code]method[/code] on the object during idle time. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example: - [codeblock] - call_deferred("set", "position", Vector2(42.0, 0.0)) - [/codeblock] + [codeblocks] + [gdscript] + var node = Node2D.new() + node.call_deferred("set", "position", Vector2(42, 0)) + [/gdscript] + [csharp] + var node = new Node2D(); + node.CallDeferred("set", "position", new Vector2(42, 0)); + [/csharp] + [/codeblocks] [b]Note:[/b] In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase). </description> </method> @@ -124,9 +147,16 @@ </argument> <description> Calls the [code]method[/code] on the object and returns the result. Contrarily to [method call], this method does not support a variable number of arguments but expects all parameters to be via a single [Array]. - [codeblock] - callv("set", [ "position", Vector2(42.0, 0.0) ]) - [/codeblock] + [codeblocks] + [gdscript] + var node = Node2D.new() + node.callv("set", ["position", Vector2(42, 0)]) + [/gdscript] + [csharp] + var node = new Node2D(); + node.Callv("set", new Godot.Collections.Array { "position", new Vector2(42, 0) }); + [/csharp] + [/codeblocks] </description> </method> <method name="can_translate_messages" qualifiers="const"> @@ -148,23 +178,140 @@ <argument index="3" name="flags" type="int" default="0"> </argument> <description> - [b]FIXME:[/b] The syntax changed with the addition of [Callable], this should be updated. - Connects a [code]signal[/code] to a [code]method[/code] on a [code]target[/code] object. Pass optional [code]binds[/code] to the call as an [Array] of parameters. These parameters will be passed to the method after any parameter used in the call to [method emit_signal]. Use [code]flags[/code] to set deferred or one-shot connections. See [enum ConnectFlags] constants. - A [code]signal[/code] can only be connected once to a [code]method[/code]. It will throw an error if already connected, unless the signal was connected with [constant CONNECT_REFERENCE_COUNTED]. To avoid this, first, use [method is_connected] to check for existing connections. - If the [code]target[/code] is destroyed in the game's lifecycle, the connection will be lost. - Examples: - [codeblock] - connect("pressed", self, "_on_Button_pressed") # BaseButton signal - connect("text_entered", self, "_on_LineEdit_text_entered") # LineEdit signal - connect("hit", self, "_on_Player_hit", [ weapon_type, damage ]) # User-defined signal - [/codeblock] - An example of the relationship between [code]binds[/code] passed to [method connect] and parameters used when calling [method emit_signal]: - [codeblock] - connect("hit", self, "_on_Player_hit", [ weapon_type, damage ]) # weapon_type and damage are passed last - emit_signal("hit", "Dark lord", 5) # "Dark lord" and 5 are passed first - func _on_Player_hit(hit_by, level, weapon_type, damage): - print("Hit by %s (lvl %d) with weapon %s for %d damage" % [hit_by, level, weapon_type, damage]) - [/codeblock] + Connects a [code]signal[/code] to a [code]callable[/code]. Pass optional [code]binds[/code] to the call as an [Array] of parameters. These parameters will be passed to the [Callable]'s method after any parameter used in the call to [method emit_signal]. Use [code]flags[/code] to set deferred or one-shot connections. See [enum ConnectFlags] constants. + [b]Note:[/b] This method is the legacy implementation for connecting signals. The recommended modern approach is to use [method Signal.connect] and to use [method Callable.bind] to add and validate parameter binds. Both syntaxes are shown below. + A signal can only be connected once to a [Callable]. It will throw an error if already connected, unless the signal was connected with [constant CONNECT_REFERENCE_COUNTED]. To avoid this, first, use [method is_connected] to check for existing connections. + If the callable's target is destroyed in the game's lifecycle, the connection will be lost. + [b]Examples with recommended syntax:[/b] + Connecting signals is one of the most common operations in Godot and the API gives many options to do so, which are described further down. The code block below shows the recommended approach for both GDScript and C#. + [codeblocks] + [gdscript] + func _ready(): + var button = Button.new() + # `button_down` here is a Signal object, and we thus call the Signal.connect() method, + # not Object.connect(). See discussion below for a more in-depth overview of the API. + button.button_down.connect(_on_button_down) + + # This assumes that a `Player` class exists which defines a `hit` signal. + var player = Player.new() + # We use Signal.connect() again, and we also use the Callable.bind() method which + # returns a new Callable with the parameter binds. + player.hit.connect(_on_player_hit.bind("sword", 100)) + + func _on_button_down(): + print("Button down!") + + func _on_player_hit(weapon_type, damage): + print("Hit with weapon %s for %d damage." % [weapon_type, damage]) + [/gdscript] + [csharp] + public override void _Ready() + { + var button = new Button(); + // C# supports passing signals as events, so we can use this idiomatic construct: + button.ButtonDown += OnButtonDown; + + // This assumes that a `Player` class exists which defines a `Hit` signal. + var player = new Player(); + // Signals as events (`player.Hit += OnPlayerHit;`) do not support argument binding. You have to use: + player.Hit.Connect(OnPlayerHit, new Godot.Collections.Array {"sword", 100 }); + } + + private void OnButtonDown() + { + GD.Print("Button down!"); + } + + private void OnPlayerHit(string weaponType, int damage) + { + GD.Print(String.Format("Hit with weapon {0} for {1} damage.", weaponType, damage)); + } + [/csharp] + [/codeblocks] + [b][code]Object.connect()[/code] or [code]Signal.connect()[/code]?[/b] + As seen above, the recommended method to connect signals is not [method Object.connect]. The code block below shows the four options for connecting signals, using either this legacy method or the recommended [method Signal.connect], and using either an implicit [Callable] or a manually defined one. + [codeblocks] + [gdscript] + func _ready(): + var button = Button.new() + # Option 1: Object.connect() with an implicit Callable for the defined function. + button.connect("button_down", _on_button_down) + # Option 2: Object.connect() with a constructed Callable using a target object and method name. + button.connect("button_down", Callable(self, "_on_button_down")) + # Option 3: Signal.connect() with an implicit Callable for the defined function. + button.button_down.connect(_on_button_down) + # Option 4: Signal.connect() with a constructed Callable using a target object and method name. + button.button_down.connect(Callable(self, "_on_button_down")) + + func _on_button_down(): + print("Button down!") + [/gdscript] + [csharp] + public override void _Ready() + { + var button = new Button(); + // Option 1: Object.Connect() with an implicit Callable for the defined function. + button.Connect("button_down", OnButtonDown); + // Option 2: Object.connect() with a constructed Callable using a target object and method name. + button.Connect("button_down", new Callable(self, nameof(OnButtonDown))); + // Option 3: Signal.connect() with an implicit Callable for the defined function. + button.ButtonDown.Connect(OnButtonDown); + // Option 3b: In C#, we can use signals as events and connect with this more idiomatic syntax: + button.ButtonDown += OnButtonDown; + // Option 4: Signal.connect() with a constructed Callable using a target object and method name. + button.ButtonDown.Connect(new Callable(self, nameof(OnButtonDown))); + } + + private void OnButtonDown() + { + GD.Print("Button down!"); + } + [/csharp] + [/codeblocks] + While all options have the same outcome ([code]button[/code]'s [signal BaseButton.button_down] signal will be connected to [code]_on_button_down[/code]), option 3 offers the best validation: it will throw a compile-time error if either the [code]button_down[/code] signal or the [code]_on_button_down[/code] callable are undefined. On the other hand, option 2 only relies on string names and will only be able to validate either names at runtime: it will throw a runtime error if [code]"button_down"[/code] doesn't correspond to a signal, or if [code]"_on_button_down"[/code] is not a registered method in the object [code]self[/code]. The main reason for using options 1, 2, or 4 would be if you actually need to use strings (e.g. to connect signals programmatically based on strings read from a configuration file). Otherwise, option 3 is the recommended (and fastest) method. + [b]Parameter bindings and passing:[/b] + For legacy or language-specific reasons, there are also several ways to bind parameters to signals. One can pass a [code]binds[/code] [Array] to [method Object.connect] or [method Signal.connect], or use the recommended [method Callable.bind] method to create a new callable from an existing one, with the given parameter binds. + One can also pass additional parameters when emitting the signal with [method emit_signal]. The examples below show the relationship between those two types of parameters. + [codeblocks] + [gdscript] + func _ready(): + # This assumes that a `Player` class exists which defines a `hit` signal. + var player = Player.new() + # Option 1: Using Callable.bind(). + player.hit.connect(_on_player_hit.bind("sword", 100)) + # Option 2: Using a `binds` Array in Signal.connect() (same syntax for Object.connect()). + player.hit.connect(_on_player_hit, ["sword", 100]) + + # Parameters added when emitting the signal are passed first. + player.emit_signal("hit", "Dark lord", 5) + + # Four arguments, since we pass two when emitting (hit_by, level) + # and two when connecting (weapon_type, damage). + func _on_player_hit(hit_by, level, weapon_type, damage): + print("Hit by %s (level %d) with weapon %s for %d damage." % [hit_by, level, weapon_type, damage]) + [/gdscript] + [csharp] + public override void _Ready() + { + // This assumes that a `Player` class exists which defines a `Hit` signal. + var player = new Player(); + // Option 1: Using Callable.Bind(). This way we can still use signals as events. + player.Hit += OnPlayerHit.Bind("sword", 100); + // Option 2: Using a `binds` Array in Signal.Connect() (same syntax for Object.Connect()). + player.Hit.Connect(OnPlayerHit, new Godot.Collections.Array{ "sword", 100 }); + + // Parameters added when emitting the signal are passed first. + player.EmitSignal("hit", "Dark lord", 5); + } + + // Four arguments, since we pass two when emitting (hitBy, level) + // and two when connecting (weaponType, damage). + private void OnPlayerHit(string hitBy, int level, string weaponType, int damage) + { + GD.Print(String.Format("Hit by {0} (level {1}) with weapon {2} for {3} damage.", hitBy, level, weaponType, damage)); + } + [/csharp] + [/codeblocks] </description> </method> <method name="disconnect"> @@ -175,8 +322,7 @@ <argument index="1" name="callable" type="Callable"> </argument> <description> - [b]FIXME:[/b] The syntax changed with the addition of [Callable], this should be updated. - Disconnects a [code]signal[/code] from a [code]method[/code] on the given [code]target[/code]. + Disconnects a [code]signal[/code] from a given [code]callable[/code]. If you try to disconnect a connection that does not exist, the method will throw an error. Use [method is_connected] to ensure that the connection exists. </description> </method> @@ -187,10 +333,16 @@ </argument> <description> Emits the given [code]signal[/code]. The signal must exist, so it should be a built-in signal of this class or one of its parent classes, or a user-defined signal. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example: - [codeblock] - emit_signal("hit", weapon_type, damage) + [codeblocks] + [gdscript] + emit_signal("hit", "sword", 100) emit_signal("game_over") - [/codeblock] + [/gdscript] + [csharp] + EmitSignal("hit", "sword", 100); + EmitSignal("game_over"); + [/csharp] + [/codeblocks] </description> </method> <method name="free"> @@ -359,8 +511,7 @@ <argument index="1" name="callable" type="Callable"> </argument> <description> - [b]FIXME:[/b] The syntax changed with the addition of [Callable], this should be updated. - Returns [code]true[/code] if a connection exists for a given [code]signal[/code], [code]target[/code], and [code]method[/code]. + Returns [code]true[/code] if a connection exists for a given [code]signal[/code] and [code]callable[/code]. </description> </method> <method name="is_queued_for_deletion" qualifiers="const"> @@ -382,11 +533,11 @@ If [code]reversed[/code] is [code]true[/code], [method _notification] is called first on the object's own class, and then up to its successive parent classes. If [code]reversed[/code] is [code]false[/code], [method _notification] is called first on the highest ancestor ([Object] itself), and then down to its successive inheriting classes. </description> </method> - <method name="property_list_changed_notify"> + <method name="notify_property_list_changed"> <return type="void"> </return> <description> - Notify the editor that the property list has changed, so that editor plugins can take the new values into account. Does nothing on export builds. + Notify the editor that the property list has changed by emitting the [signal property_list_changed] signal, so that editor plugins can take the new values into account. </description> </method> <method name="remove_meta"> @@ -440,11 +591,20 @@ </argument> <description> Assigns a new value to the property identified by the [NodePath]. The node path should be relative to the current object and can use the colon character ([code]:[/code]) to access nested properties. Example: - [codeblock] - set_indexed("position", Vector2(42, 0)) - set_indexed("position:y", -10) - print(position) # (42, -10) - [/codeblock] + [codeblocks] + [gdscript] + var node = Node2D.new() + node.set_indexed("position", Vector2(42, 0)) + node.set_indexed("position:y", -10) + print(node.position) # (42, -10) + [/gdscript] + [csharp] + var node = new Node2D(); + node.SetIndexed("position", new Vector2(42, 0)); + node.SetIndexed("position:y", -10); + GD.Print(node.Position); // (42, -10) + [/csharp] + [/codeblocks] </description> </method> <method name="set_message_translation"> @@ -520,6 +680,10 @@ </method> </methods> <signals> + <signal name="property_list_changed"> + <description> + </description> + </signal> <signal name="script_changed"> <description> Emitted whenever the object's script is changed. diff --git a/doc/classes/PHashTranslation.xml b/doc/classes/OptimizedTranslation.xml index 30194e9495..a5ca93c7ff 100644 --- a/doc/classes/PHashTranslation.xml +++ b/doc/classes/OptimizedTranslation.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="PHashTranslation" inherits="Translation" version="4.0"> +<class name="OptimizedTranslation" inherits="Translation" version="4.0"> <brief_description> Optimized translation. </brief_description> diff --git a/doc/classes/OptionButton.xml b/doc/classes/OptionButton.xml index 1a80962751..52da08c02f 100644 --- a/doc/classes/OptionButton.xml +++ b/doc/classes/OptionButton.xml @@ -259,6 +259,9 @@ <theme_item name="font_hover_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> Text [Color] used when the [OptionButton] is being hovered. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [OptionButton]. + </theme_item> <theme_item name="font_pressed_color" type="Color" default="Color( 1, 1, 1, 1 )"> Text [Color] used when the [OptionButton] is being pressed. </theme_item> @@ -280,6 +283,9 @@ <theme_item name="normal_mirrored" type="StyleBox"> Default [StyleBox] for the [OptionButton] (for right-to-left layouts). </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="pressed" type="StyleBox"> [StyleBox] used when the [OptionButton] is being pressed (for left-to-right layouts). </theme_item> diff --git a/doc/classes/PackedByteArray.xml b/doc/classes/PackedByteArray.xml index 75fb7c1465..21f835a53c 100644 --- a/doc/classes/PackedByteArray.xml +++ b/doc/classes/PackedByteArray.xml @@ -52,7 +52,7 @@ Appends a [PackedByteArray] at the end of this array. </description> </method> - <method name="compress"> + <method name="compress" qualifiers="const"> <return type="PackedByteArray"> </return> <argument index="0" name="compression_mode" type="int" default="0"> @@ -61,7 +61,7 @@ Returns a new [PackedByteArray] with the data compressed. Set the compression mode using one of [enum File.CompressionMode]'s constants. </description> </method> - <method name="decompress"> + <method name="decompress" qualifiers="const"> <return type="PackedByteArray"> </return> <argument index="0" name="buffer_size" type="int"> @@ -72,7 +72,7 @@ Returns a new [PackedByteArray] with the data decompressed. Set [code]buffer_size[/code] to the size of the uncompressed data. Set the compression mode using one of [enum File.CompressionMode]'s constants. </description> </method> - <method name="decompress_dynamic"> + <method name="decompress_dynamic" qualifiers="const"> <return type="PackedByteArray"> </return> <argument index="0" name="max_output_size" type="int"> @@ -81,7 +81,7 @@ </argument> <description> Returns a new [PackedByteArray] with the data decompressed. Set the compression mode using one of [enum File.CompressionMode]'s constants. [b]This method only accepts gzip and deflate compression modes.[/b] - This method is potentially slower than [code]decompress[/code], as it may have to re-allocate it's output buffer multiple times while decompressing, where as [code]decompress[/code] knows it's output buffer size from the beginning. + This method is potentially slower than [code]decompress[/code], as it may have to re-allocate its output buffer multiple times while decompressing, whereas [code]decompress[/code] knows it's output buffer size from the beginning. GZIP has a maximal compression ratio of 1032:1, meaning it's very possible for a small compressed payload to decompress to a potentially very large output. To guard against this, you may provide a maximum size this function is allowed to allocate in bytes via [code]max_output_size[/code]. Passing -1 will allow for unbounded output. If any positive value is passed, and the decompression exceeds that amount in bytes, then an error will be returned. </description> </method> @@ -92,28 +92,28 @@ Creates a copy of the array, and returns it. </description> </method> - <method name="get_string_from_ascii"> + <method name="get_string_from_ascii" qualifiers="const"> <return type="String"> </return> <description> Converts ASCII/Latin-1 encoded array to [String]. Fast alternative to [method get_string_from_utf8] if the content is ASCII/Latin-1 only. Unlike the UTF-8 function this function maps every byte to a character in the array. Multibyte sequences will not be interpreted correctly. For parsing user input always use [method get_string_from_utf8]. </description> </method> - <method name="get_string_from_utf16"> + <method name="get_string_from_utf16" qualifiers="const"> <return type="String"> </return> <description> Converts UTF-16 encoded array to [String]. If the BOM is missing, system endianness is assumed. Returns empty string if source array is not valid UTF-16 string. </description> </method> - <method name="get_string_from_utf32"> + <method name="get_string_from_utf32" qualifiers="const"> <return type="String"> </return> <description> Converts UTF-32 encoded array to [String]. System endianness is assumed. Returns empty string if source array is not valid UTF-32 string. </description> </method> - <method name="get_string_from_utf8"> + <method name="get_string_from_utf8" qualifiers="const"> <return type="String"> </return> <description> @@ -129,7 +129,7 @@ Returns [code]true[/code] if the array contains [code]value[/code]. </description> </method> - <method name="hex_encode"> + <method name="hex_encode" qualifiers="const"> <return type="String"> </return> <description> @@ -157,14 +157,7 @@ Inserts a new element at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -230,6 +223,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -241,7 +241,7 @@ Changes the byte at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -255,7 +255,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedByteArray"> </return> <argument index="0" name="from" type="int"> diff --git a/doc/classes/PackedColorArray.xml b/doc/classes/PackedColorArray.xml index 48d5822f7c..38240b3154 100644 --- a/doc/classes/PackedColorArray.xml +++ b/doc/classes/PackedColorArray.xml @@ -79,14 +79,7 @@ Inserts a new element at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -152,6 +145,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -163,7 +163,7 @@ Changes the [Color] at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -177,7 +177,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedColorArray"> </return> <argument index="0" name="from" type="int"> @@ -187,7 +187,7 @@ <description> </description> </method> - <method name="to_byte_array"> + <method name="to_byte_array" qualifiers="const"> <return type="PackedByteArray"> </return> <description> diff --git a/doc/classes/PackedFloat32Array.xml b/doc/classes/PackedFloat32Array.xml index 6598828089..6be1d24b5d 100644 --- a/doc/classes/PackedFloat32Array.xml +++ b/doc/classes/PackedFloat32Array.xml @@ -80,14 +80,7 @@ Inserts a new element at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -145,6 +138,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -156,7 +156,7 @@ Changes the float at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -170,7 +170,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedFloat32Array"> </return> <argument index="0" name="from" type="int"> @@ -180,7 +180,7 @@ <description> </description> </method> - <method name="to_byte_array"> + <method name="to_byte_array" qualifiers="const"> <return type="PackedByteArray"> </return> <description> diff --git a/doc/classes/PackedFloat64Array.xml b/doc/classes/PackedFloat64Array.xml index d116c6756b..fb7817cb41 100644 --- a/doc/classes/PackedFloat64Array.xml +++ b/doc/classes/PackedFloat64Array.xml @@ -80,14 +80,7 @@ Inserts a new element at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -153,6 +146,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -164,7 +164,7 @@ Changes the float at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -178,7 +178,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedFloat64Array"> </return> <argument index="0" name="from" type="int"> @@ -188,7 +188,7 @@ <description> </description> </method> - <method name="to_byte_array"> + <method name="to_byte_array" qualifiers="const"> <return type="PackedByteArray"> </return> <description> diff --git a/doc/classes/PackedInt32Array.xml b/doc/classes/PackedInt32Array.xml index 2ac7a67b4b..4ee428dfbc 100644 --- a/doc/classes/PackedInt32Array.xml +++ b/doc/classes/PackedInt32Array.xml @@ -80,14 +80,7 @@ Inserts a new integer at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -153,6 +146,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -164,7 +164,7 @@ Changes the integer at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -178,7 +178,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedInt32Array"> </return> <argument index="0" name="from" type="int"> @@ -188,7 +188,7 @@ <description> </description> </method> - <method name="to_byte_array"> + <method name="to_byte_array" qualifiers="const"> <return type="PackedByteArray"> </return> <description> diff --git a/doc/classes/PackedInt64Array.xml b/doc/classes/PackedInt64Array.xml index a7b6bf0a0f..51948fcbc8 100644 --- a/doc/classes/PackedInt64Array.xml +++ b/doc/classes/PackedInt64Array.xml @@ -80,14 +80,7 @@ Inserts a new integer at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -153,6 +146,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -164,7 +164,7 @@ Changes the integer at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -178,7 +178,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedInt64Array"> </return> <argument index="0" name="from" type="int"> @@ -188,7 +188,7 @@ <description> </description> </method> - <method name="to_byte_array"> + <method name="to_byte_array" qualifiers="const"> <return type="PackedByteArray"> </return> <description> diff --git a/doc/classes/PackedScene.xml b/doc/classes/PackedScene.xml index d15bcfd114..1d9be7f165 100644 --- a/doc/classes/PackedScene.xml +++ b/doc/classes/PackedScene.xml @@ -5,7 +5,7 @@ </brief_description> <description> A simplified interface to a scene file. Provides access to operations and checks that can be performed on the scene resource itself. - Can be used to save a node to a file. When saving, the node as well as all the node it owns get saved (see [code]owner[/code] property on [Node]). + Can be used to save a node to a file. When saving, the node as well as all the nodes it owns get saved (see [code]owner[/code] property on [Node]). [b]Note:[/b] The node doesn't need to own itself. [b]Example of loading a saved scene:[/b] [codeblocks] diff --git a/doc/classes/PackedSceneGLTF.xml b/doc/classes/PackedSceneGLTF.xml deleted file mode 100644 index a04c6ef0b6..0000000000 --- a/doc/classes/PackedSceneGLTF.xml +++ /dev/null @@ -1,58 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="PackedSceneGLTF" inherits="PackedScene" version="4.0"> - <brief_description> - </brief_description> - <description> - </description> - <tutorials> - </tutorials> - <methods> - <method name="export_gltf"> - <return type="int" enum="Error"> - </return> - <argument index="0" name="node" type="Node"> - </argument> - <argument index="1" name="path" type="String"> - </argument> - <argument index="2" name="flags" type="int" default="0"> - </argument> - <argument index="3" name="bake_fps" type="float" default="1000.0"> - </argument> - <description> - </description> - </method> - <method name="import_gltf_scene"> - <return type="Node"> - </return> - <argument index="0" name="path" type="String"> - </argument> - <argument index="1" name="flags" type="int" default="0"> - </argument> - <argument index="2" name="bake_fps" type="float" default="1000.0"> - </argument> - <argument index="3" name="state" type="GLTFState" default="null"> - </argument> - <description> - </description> - </method> - <method name="pack_gltf"> - <return type="void"> - </return> - <argument index="0" name="path" type="String"> - </argument> - <argument index="1" name="flags" type="int" default="0"> - </argument> - <argument index="2" name="bake_fps" type="float" default="1000.0"> - </argument> - <argument index="3" name="state" type="GLTFState" default="null"> - </argument> - <description> - </description> - </method> - </methods> - <members> - <member name="_bundled" type="Dictionary" setter="_set_bundled_scene" getter="_get_bundled_scene" override="true" default="{"conn_count": 0,"conns": PackedInt32Array( ),"editable_instances": [ ],"names": PackedStringArray( ),"node_count": 0,"node_paths": [ ],"nodes": PackedInt32Array( ),"variants": [ ],"version": 2}" /> - </members> - <constants> - </constants> -</class> diff --git a/doc/classes/PackedStringArray.xml b/doc/classes/PackedStringArray.xml index fb7ed2a906..9748301dae 100644 --- a/doc/classes/PackedStringArray.xml +++ b/doc/classes/PackedStringArray.xml @@ -80,14 +80,7 @@ Inserts a new element at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -153,6 +146,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -164,7 +164,7 @@ Changes the [String] at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -178,7 +178,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedStringArray"> </return> <argument index="0" name="from" type="int"> @@ -188,7 +188,7 @@ <description> </description> </method> - <method name="to_byte_array"> + <method name="to_byte_array" qualifiers="const"> <return type="PackedByteArray"> </return> <description> diff --git a/doc/classes/PackedVector2Array.xml b/doc/classes/PackedVector2Array.xml index eb364ddb18..1b3201b072 100644 --- a/doc/classes/PackedVector2Array.xml +++ b/doc/classes/PackedVector2Array.xml @@ -80,14 +80,7 @@ Inserts a new element at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -161,6 +154,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -172,7 +172,7 @@ Changes the [Vector2] at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -186,7 +186,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedVector2Array"> </return> <argument index="0" name="from" type="int"> @@ -196,7 +196,7 @@ <description> </description> </method> - <method name="to_byte_array"> + <method name="to_byte_array" qualifiers="const"> <return type="PackedByteArray"> </return> <description> diff --git a/doc/classes/PackedVector3Array.xml b/doc/classes/PackedVector3Array.xml index 08ce187b5c..25d854016a 100644 --- a/doc/classes/PackedVector3Array.xml +++ b/doc/classes/PackedVector3Array.xml @@ -79,14 +79,7 @@ Inserts a new element at a given position in the array. The position must be valid, or at the end of the array ([code]idx == size()[/code]). </description> </method> - <method name="invert"> - <return type="void"> - </return> - <description> - Reverses the order of the elements in the array. - </description> - </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> @@ -160,6 +153,13 @@ Sets the size of the array. If the array is grown, reserves elements at the end of the array. If the array is shrunk, truncates the array to the new size. </description> </method> + <method name="reverse"> + <return type="void"> + </return> + <description> + Reverses the order of the elements in the array. + </description> + </method> <method name="set"> <return type="void"> </return> @@ -171,7 +171,7 @@ Changes the [Vector3] at the given index. </description> </method> - <method name="size"> + <method name="size" qualifiers="const"> <return type="int"> </return> <description> @@ -185,7 +185,7 @@ Sorts the elements of the array in ascending order. </description> </method> - <method name="subarray"> + <method name="subarray" qualifiers="const"> <return type="PackedVector3Array"> </return> <argument index="0" name="from" type="int"> @@ -195,7 +195,7 @@ <description> </description> </method> - <method name="to_byte_array"> + <method name="to_byte_array" qualifiers="const"> <return type="PackedByteArray"> </return> <description> diff --git a/doc/classes/ParticlesMaterial.xml b/doc/classes/ParticlesMaterial.xml index 85058cb9d4..6d7f99a55b 100644 --- a/doc/classes/ParticlesMaterial.xml +++ b/doc/classes/ParticlesMaterial.xml @@ -181,7 +181,7 @@ The sphere's radius if [code]emission_shape[/code] is set to [constant EMISSION_SHAPE_SPHERE]. </member> <member name="flatness" type="float" setter="set_flatness" getter="get_flatness" default="0.0"> - Amount of [member spread] in Y/Z plane. A value of [code]1[/code] restricts particles to X/Z plane. + Amount of [member spread] along the Y axis. </member> <member name="gravity" type="Vector3" setter="set_gravity" getter="get_gravity" default="Vector3( 0, -9.8, 0 )"> Gravity applied to every particle. @@ -251,7 +251,7 @@ Scale randomness ratio. </member> <member name="spread" type="float" setter="set_spread" getter="get_spread" default="45.0"> - Each particle's initial direction range from [code]+spread[/code] to [code]-spread[/code] degrees. Applied to X/Z plane and Y/Z planes. + Each particle's initial direction range from [code]+spread[/code] to [code]-spread[/code] degrees. </member> <member name="sub_emitter_amount_at_end" type="int" setter="set_sub_emitter_amount_at_end" getter="get_sub_emitter_amount_at_end"> </member> diff --git a/doc/classes/PhysicalBone3D.xml b/doc/classes/PhysicalBone3D.xml index dcf24c1d32..38d9f722b1 100644 --- a/doc/classes/PhysicalBone3D.xml +++ b/doc/classes/PhysicalBone3D.xml @@ -91,7 +91,7 @@ The body's bounciness. Values range from [code]0[/code] (no bounce) to [code]1[/code] (full bounciness). </member> <member name="can_sleep" type="bool" setter="set_can_sleep" getter="is_able_to_sleep" default="true"> - If [code]true[/code], the body is deactivated when there is no movement, so it will not take part in the simulation until it is awaken by an external force. + If [code]true[/code], the body is deactivated when there is no movement, so it will not take part in the simulation until it is awakened by an external force. </member> <member name="friction" type="float" setter="set_friction" getter="get_friction" default="1.0"> The body's friction, from [code]0[/code] (frictionless) to [code]1[/code] (max friction). diff --git a/doc/classes/PhysicalSkyMaterial.xml b/doc/classes/PhysicalSkyMaterial.xml index 2e0f9c52f2..381371b973 100644 --- a/doc/classes/PhysicalSkyMaterial.xml +++ b/doc/classes/PhysicalSkyMaterial.xml @@ -23,22 +23,22 @@ Modulates the [Color] on the bottom half of the sky to represent the ground. </member> <member name="mie_coefficient" type="float" setter="set_mie_coefficient" getter="get_mie_coefficient" default="0.005"> - Controls the strength of mie scattering for the sky. Mie scattering results from light colliding with larger particles (like water). On earth, mie scattering results in a whiteish color around the sun and horizon. + Controls the strength of mie scattering for the sky. Mie scattering results from light colliding with larger particles (like water). On earth, mie scattering results in a whitish color around the sun and horizon. </member> <member name="mie_color" type="Color" setter="set_mie_color" getter="get_mie_color" default="Color( 0.36, 0.56, 0.82, 1 )"> Controls the [Color] of the mie scattering effect. While not physically accurate, this allows for the creation of alien looking planets. </member> <member name="mie_eccentricity" type="float" setter="set_mie_eccentricity" getter="get_mie_eccentricity" default="0.8"> - Controls the direction of the mie scattering. A value of [code]1[/code] means that when light hits a particle it passing through straight forward. A value of [code]-1[/code] means that all light is scatter backwards. + Controls the direction of the mie scattering. A value of [code]1[/code] means that when light hits a particle it's passing through straight forward. A value of [code]-1[/code] means that all light is scatter backwards. </member> <member name="night_sky" type="Texture2D" setter="set_night_sky" getter="get_night_sky"> [Texture2D] for the night sky. This is added to the sky, so if it is bright enough, it may be visible during the day. </member> <member name="rayleigh_coefficient" type="float" setter="set_rayleigh_coefficient" getter="get_rayleigh_coefficient" default="2.0"> - Controls the strength of the rayleigh scattering. Rayleigh scattering results from light colliding with small particles. It is responsible for the blue color of the sky. + Controls the strength of the Rayleigh scattering. Rayleigh scattering results from light colliding with small particles. It is responsible for the blue color of the sky. </member> <member name="rayleigh_color" type="Color" setter="set_rayleigh_color" getter="get_rayleigh_color" default="Color( 0.056, 0.14, 0.3, 1 )"> - Controls the [Color] of the rayleigh scattering. While not physically accurate, this allows for the creation of alien looking planets. For example, setting this to a red [Color] results in a mars looking atmosphere with a corresponding blue sunset. + Controls the [Color] of the Rayleigh scattering. While not physically accurate, this allows for the creation of alien looking planets. For example, setting this to a red [Color] results in a Mars looking atmosphere with a corresponding blue sunset. </member> <member name="sun_disk_scale" type="float" setter="set_sun_disk_scale" getter="get_sun_disk_scale" default="1.0"> Sets the size of the sun disk. Default value is based on Sol's perceived size from Earth. diff --git a/doc/classes/PhysicsServer2D.xml b/doc/classes/PhysicsServer2D.xml index 6a1508b0e3..701a430538 100644 --- a/doc/classes/PhysicsServer2D.xml +++ b/doc/classes/PhysicsServer2D.xml @@ -58,7 +58,7 @@ <return type="RID"> </return> <description> - Creates an [Area2D]. + Creates an [Area2D]. After creating an [Area2D] with this method, assign it to a space using [method area_set_space] to use the created [Area2D] in the physics world. </description> </method> <method name="area_get_canvas_instance_id" qualifiers="const"> @@ -850,21 +850,6 @@ <description> </description> </method> - <method name="damped_spring_joint_create"> - <return type="RID"> - </return> - <argument index="0" name="anchor_a" type="Vector2"> - </argument> - <argument index="1" name="anchor_b" type="Vector2"> - </argument> - <argument index="2" name="body_a" type="RID"> - </argument> - <argument index="3" name="body_b" type="RID"> - </argument> - <description> - Creates a damped spring joint between two bodies. If not specified, the second body is assumed to be the joint itself. - </description> - </method> <method name="damped_spring_joint_get_param" qualifiers="const"> <return type="float"> </return> @@ -907,21 +892,18 @@ Returns information about the current state of the 2D physics engine. See [enum ProcessInfo] for a list of available states. </description> </method> - <method name="groove_joint_create"> - <return type="RID"> + <method name="joint_clear"> + <return type="void"> </return> - <argument index="0" name="groove1_a" type="Vector2"> - </argument> - <argument index="1" name="groove2_a" type="Vector2"> - </argument> - <argument index="2" name="anchor_b" type="Vector2"> - </argument> - <argument index="3" name="body_a" type="RID"> - </argument> - <argument index="4" name="body_b" type="RID"> + <argument index="0" name="joint" type="RID"> </argument> <description> - Creates a groove joint between two bodies. If not specified, the bodies are assumed to be the joint itself. + </description> + </method> + <method name="joint_create"> + <return type="RID"> + </return> + <description> </description> </method> <method name="joint_get_param" qualifiers="const"> @@ -944,36 +926,71 @@ Returns a joint's type (see [enum JointType]). </description> </method> - <method name="joint_set_param"> + <method name="joint_make_damped_spring"> <return type="void"> </return> <argument index="0" name="joint" type="RID"> </argument> - <argument index="1" name="param" type="int" enum="PhysicsServer2D.JointParam"> + <argument index="1" name="anchor_a" type="Vector2"> </argument> - <argument index="2" name="value" type="float"> + <argument index="2" name="anchor_b" type="Vector2"> + </argument> + <argument index="3" name="body_a" type="RID"> + </argument> + <argument index="4" name="body_b" type="RID"> </argument> <description> - Sets a joint parameter. See [enum JointParam] for a list of available parameters. </description> </method> - <method name="line_shape_create"> - <return type="RID"> + <method name="joint_make_groove"> + <return type="void"> </return> + <argument index="0" name="joint" type="RID"> + </argument> + <argument index="1" name="groove1_a" type="Vector2"> + </argument> + <argument index="2" name="groove2_a" type="Vector2"> + </argument> + <argument index="3" name="anchor_b" type="Vector2"> + </argument> + <argument index="4" name="body_a" type="RID"> + </argument> + <argument index="5" name="body_b" type="RID"> + </argument> <description> </description> </method> - <method name="pin_joint_create"> - <return type="RID"> + <method name="joint_make_pin"> + <return type="void"> </return> - <argument index="0" name="anchor" type="Vector2"> + <argument index="0" name="joint" type="RID"> </argument> - <argument index="1" name="body_a" type="RID"> + <argument index="1" name="anchor" type="Vector2"> </argument> - <argument index="2" name="body_b" type="RID"> + <argument index="2" name="body_a" type="RID"> + </argument> + <argument index="3" name="body_b" type="RID"> </argument> <description> - Creates a pin joint between two bodies. If not specified, the second body is assumed to be the joint itself. + </description> + </method> + <method name="joint_set_param"> + <return type="void"> + </return> + <argument index="0" name="joint" type="RID"> + </argument> + <argument index="1" name="param" type="int" enum="PhysicsServer2D.JointParam"> + </argument> + <argument index="2" name="value" type="float"> + </argument> + <description> + Sets a joint parameter. See [enum JointParam] for a list of available parameters. + </description> + </method> + <method name="line_shape_create"> + <return type="RID"> + </return> + <description> </description> </method> <method name="ray_shape_create"> @@ -1233,15 +1250,18 @@ <constant name="BODY_STATE_CAN_SLEEP" value="4" enum="BodyState"> Constant to set/get whether the body can sleep. </constant> - <constant name="JOINT_PIN" value="0" enum="JointType"> + <constant name="JOINT_TYPE_PIN" value="0" enum="JointType"> Constant to create pin joints. </constant> - <constant name="JOINT_GROOVE" value="1" enum="JointType"> + <constant name="JOINT_TYPE_GROOVE" value="1" enum="JointType"> Constant to create groove joints. </constant> - <constant name="JOINT_DAMPED_SPRING" value="2" enum="JointType"> + <constant name="JOINT_TYPE_DAMPED_SPRING" value="2" enum="JointType"> Constant to create damped spring joints. </constant> + <constant name="JOINT_TYPE_MAX" value="3" enum="JointType"> + Represents the size of the [enum JointType] enum. + </constant> <constant name="JOINT_PARAM_BIAS" value="0" enum="JointParam"> </constant> <constant name="JOINT_PARAM_MAX_BIAS" value="1" enum="JointParam"> diff --git a/doc/classes/PhysicsServer3D.xml b/doc/classes/PhysicsServer3D.xml index 5fd3ef5db2..c61347ba0b 100644 --- a/doc/classes/PhysicsServer3D.xml +++ b/doc/classes/PhysicsServer3D.xml @@ -129,15 +129,6 @@ Returns the transform matrix for an area. </description> </method> - <method name="area_is_ray_pickable" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="area" type="RID"> - </argument> - <description> - If [code]true[/code], area collides with rays. - </description> - </method> <method name="area_remove_shape"> <return type="void"> </return> @@ -421,12 +412,7 @@ <method name="body_create"> <return type="RID"> </return> - <argument index="0" name="mode" type="int" enum="PhysicsServer3D.BodyMode" default="2"> - </argument> - <argument index="1" name="init_sleeping" type="bool" default="false"> - </argument> <description> - Creates a physics body. The first parameter can be any value from [enum BodyMode] constants, for the type of body created. Additionally, the body can be created in sleeping state to save processing time. </description> </method> <method name="body_get_collision_layer" qualifiers="const"> @@ -582,15 +568,6 @@ Returns whether a body uses a callback function to calculate its own physics (see [method body_set_force_integration_callback]). </description> </method> - <method name="body_is_ray_pickable" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="body" type="RID"> - </argument> - <description> - If [code]true[/code], the body can be detected by rays. - </description> - </method> <method name="body_remove_collision_exception"> <return type="void"> </return> @@ -815,6 +792,24 @@ Sets a body state (see [enum BodyState] constants). </description> </method> + <method name="box_shape_create"> + <return type="RID"> + </return> + <description> + </description> + </method> + <method name="capsule_shape_create"> + <return type="RID"> + </return> + <description> + </description> + </method> + <method name="concave_polygon_shape_create"> + <return type="RID"> + </return> + <description> + </description> + </method> <method name="cone_twist_joint_get_param" qualifiers="const"> <return type="float"> </return> @@ -839,6 +834,24 @@ Sets a cone_twist_joint parameter (see [enum ConeTwistJointParam] constants). </description> </method> + <method name="convex_polygon_shape_create"> + <return type="RID"> + </return> + <description> + </description> + </method> + <method name="custom_shape_create"> + <return type="RID"> + </return> + <description> + </description> + </method> + <method name="cylinder_shape_create"> + <return type="RID"> + </return> + <description> + </description> + </method> <method name="free_rid"> <return type="void"> </return> @@ -848,7 +861,7 @@ Destroys any of the objects created by PhysicsServer3D. If the [RID] passed is not one of the objects that can be created by PhysicsServer3D, an error will be sent to the console. </description> </method> - <method name="generic_6dof_joint_get_flag"> + <method name="generic_6dof_joint_get_flag" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="joint" type="RID"> @@ -861,7 +874,7 @@ Gets a generic_6_DOF_joint flag (see [enum G6DOFJointAxisFlag] constants). </description> </method> - <method name="generic_6dof_joint_get_param"> + <method name="generic_6dof_joint_get_param" qualifiers="const"> <return type="float"> </return> <argument index="0" name="joint" type="RID"> @@ -913,6 +926,12 @@ Returns an Info defined by the [enum ProcessInfo] input given. </description> </method> + <method name="heightmap_shape_create"> + <return type="RID"> + </return> + <description> + </description> + </method> <method name="hinge_joint_get_flag" qualifiers="const"> <return type="bool"> </return> @@ -961,97 +980,116 @@ Sets a hinge_joint parameter (see [enum HingeJointParam] constants). </description> </method> - <method name="joint_create_cone_twist"> - <return type="RID"> + <method name="joint_clear"> + <return type="void"> </return> - <argument index="0" name="body_A" type="RID"> - </argument> - <argument index="1" name="local_ref_A" type="Transform"> - </argument> - <argument index="2" name="body_B" type="RID"> - </argument> - <argument index="3" name="local_ref_B" type="Transform"> + <argument index="0" name="joint" type="RID"> </argument> <description> - Creates a [ConeTwistJoint3D]. </description> </method> - <method name="joint_create_generic_6dof"> + <method name="joint_create"> <return type="RID"> </return> - <argument index="0" name="body_A" type="RID"> - </argument> - <argument index="1" name="local_ref_A" type="Transform"> - </argument> - <argument index="2" name="body_B" type="RID"> + <description> + </description> + </method> + <method name="joint_get_solver_priority" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="joint" type="RID"> </argument> - <argument index="3" name="local_ref_B" type="Transform"> + <description> + Gets the priority value of the Joint3D. + </description> + </method> + <method name="joint_get_type" qualifiers="const"> + <return type="int" enum="PhysicsServer3D.JointType"> + </return> + <argument index="0" name="joint" type="RID"> </argument> <description> - Creates a [Generic6DOFJoint3D]. + Returns the type of the Joint3D. </description> </method> - <method name="joint_create_hinge"> - <return type="RID"> + <method name="joint_make_cone_twist"> + <return type="void"> </return> - <argument index="0" name="body_A" type="RID"> + <argument index="0" name="joint" type="RID"> + </argument> + <argument index="1" name="body_A" type="RID"> </argument> - <argument index="1" name="hinge_A" type="Transform"> + <argument index="2" name="local_ref_A" type="Transform"> </argument> - <argument index="2" name="body_B" type="RID"> + <argument index="3" name="body_B" type="RID"> </argument> - <argument index="3" name="hinge_B" type="Transform"> + <argument index="4" name="local_ref_B" type="Transform"> </argument> <description> - Creates a [HingeJoint3D]. </description> </method> - <method name="joint_create_pin"> - <return type="RID"> + <method name="joint_make_generic_6dof"> + <return type="void"> </return> - <argument index="0" name="body_A" type="RID"> + <argument index="0" name="joint" type="RID"> </argument> - <argument index="1" name="local_A" type="Vector3"> + <argument index="1" name="body_A" type="RID"> </argument> - <argument index="2" name="body_B" type="RID"> + <argument index="2" name="local_ref_A" type="Transform"> </argument> - <argument index="3" name="local_B" type="Vector3"> + <argument index="3" name="body_B" type="RID"> + </argument> + <argument index="4" name="local_ref_B" type="Transform"> </argument> <description> - Creates a [PinJoint3D]. </description> </method> - <method name="joint_create_slider"> - <return type="RID"> + <method name="joint_make_hinge"> + <return type="void"> </return> - <argument index="0" name="body_A" type="RID"> + <argument index="0" name="joint" type="RID"> </argument> - <argument index="1" name="local_ref_A" type="Transform"> + <argument index="1" name="body_A" type="RID"> </argument> - <argument index="2" name="body_B" type="RID"> + <argument index="2" name="hinge_A" type="Transform"> </argument> - <argument index="3" name="local_ref_B" type="Transform"> + <argument index="3" name="body_B" type="RID"> + </argument> + <argument index="4" name="hinge_B" type="Transform"> </argument> <description> - Creates a [SliderJoint3D]. </description> </method> - <method name="joint_get_solver_priority" qualifiers="const"> - <return type="int"> + <method name="joint_make_pin"> + <return type="void"> </return> <argument index="0" name="joint" type="RID"> </argument> + <argument index="1" name="body_A" type="RID"> + </argument> + <argument index="2" name="local_A" type="Vector3"> + </argument> + <argument index="3" name="body_B" type="RID"> + </argument> + <argument index="4" name="local_B" type="Vector3"> + </argument> <description> - Gets the priority value of the Joint3D. </description> </method> - <method name="joint_get_type" qualifiers="const"> - <return type="int" enum="PhysicsServer3D.JointType"> + <method name="joint_make_slider"> + <return type="void"> </return> <argument index="0" name="joint" type="RID"> </argument> + <argument index="1" name="body_A" type="RID"> + </argument> + <argument index="2" name="local_ref_A" type="Transform"> + </argument> + <argument index="3" name="body_B" type="RID"> + </argument> + <argument index="4" name="local_ref_B" type="Transform"> + </argument> <description> - Returns the type of the Joint3D. </description> </method> <method name="joint_set_solver_priority"> @@ -1129,22 +1167,25 @@ Sets a pin_joint parameter (see [enum PinJointParam] constants). </description> </method> - <method name="set_active"> - <return type="void"> + <method name="plane_shape_create"> + <return type="RID"> </return> - <argument index="0" name="active" type="bool"> - </argument> <description> - Activates or deactivates the 3D physics engine. </description> </method> - <method name="shape_create"> + <method name="ray_shape_create"> <return type="RID"> </return> - <argument index="0" name="type" type="int" enum="PhysicsServer3D.ShapeType"> + <description> + </description> + </method> + <method name="set_active"> + <return type="void"> + </return> + <argument index="0" name="active" type="bool"> </argument> <description> - Creates a shape of a type from [enum ShapeType]. Does not assign it to a body or an area. To do so, you must use [method area_set_shape] or [method body_set_shape]. + Activates or deactivates the 3D physics engine. </description> </method> <method name="shape_get_data" qualifiers="const"> @@ -1200,6 +1241,14 @@ Gets a slider_joint parameter (see [enum SliderJointParam] constants). </description> </method> + <method name="soft_body_get_bounds" qualifiers="const"> + <return type="AABB"> + </return> + <argument index="0" name="body" type="RID"> + </argument> + <description> + </description> + </method> <method name="space_create"> <return type="RID"> </return> @@ -1260,23 +1309,32 @@ Sets the value for a space parameter. A list of available parameters is on the [enum SpaceParameter] constants. </description> </method> + <method name="sphere_shape_create"> + <return type="RID"> + </return> + <description> + </description> + </method> </methods> <constants> - <constant name="JOINT_PIN" value="0" enum="JointType"> + <constant name="JOINT_TYPE_PIN" value="0" enum="JointType"> The [Joint3D] is a [PinJoint3D]. </constant> - <constant name="JOINT_HINGE" value="1" enum="JointType"> + <constant name="JOINT_TYPE_HINGE" value="1" enum="JointType"> The [Joint3D] is a [HingeJoint3D]. </constant> - <constant name="JOINT_SLIDER" value="2" enum="JointType"> + <constant name="JOINT_TYPE_SLIDER" value="2" enum="JointType"> The [Joint3D] is a [SliderJoint3D]. </constant> - <constant name="JOINT_CONE_TWIST" value="3" enum="JointType"> + <constant name="JOINT_TYPE_CONE_TWIST" value="3" enum="JointType"> The [Joint3D] is a [ConeTwistJoint3D]. </constant> - <constant name="JOINT_6DOF" value="4" enum="JointType"> + <constant name="JOINT_TYPE_6DOF" value="4" enum="JointType"> The [Joint3D] is a [Generic6DOFJoint3D]. </constant> + <constant name="JOINT_TYPE_MAX" value="5" enum="JointType"> + Represents the size of the [enum JointType] enum. + </constant> <constant name="PIN_JOINT_BIAS" value="0" enum="PinJointParam"> The strength with which the pinned objects try to stay in positional relation to each other. The higher, the stronger. @@ -1493,7 +1551,10 @@ <constant name="SHAPE_HEIGHTMAP" value="8" enum="ShapeType"> The [Shape3D] is a [HeightMapShape3D]. </constant> - <constant name="SHAPE_CUSTOM" value="9" enum="ShapeType"> + <constant name="SHAPE_SOFT_BODY" value="9" enum="ShapeType"> + The [Shape3D] is a [SoftBody3D]. + </constant> + <constant name="SHAPE_CUSTOM" value="10" enum="ShapeType"> This constant is used internally by the engine. Any attempt to create this kind of shape results in an error. </constant> <constant name="AREA_PARAM_GRAVITY" value="0" enum="AreaParameter"> diff --git a/doc/classes/Plane.xml b/doc/classes/Plane.xml index ed96f753c2..2342f00631 100644 --- a/doc/classes/Plane.xml +++ b/doc/classes/Plane.xml @@ -76,14 +76,14 @@ Creates a plane from the three points, given in clockwise order. </description> </method> - <method name="center"> + <method name="center" qualifiers="const"> <return type="Vector3"> </return> <description> Returns the center of the plane. </description> </method> - <method name="distance_to"> + <method name="distance_to" qualifiers="const"> <return type="float"> </return> <argument index="0" name="point" type="Vector3"> @@ -92,7 +92,7 @@ Returns the shortest distance from the plane to the position [code]point[/code]. </description> </method> - <method name="has_point"> + <method name="has_point" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="point" type="Vector3"> @@ -103,7 +103,7 @@ Returns [code]true[/code] if [code]point[/code] is inside the plane. Comparison uses a custom minimum [code]epsilon[/code] threshold. </description> </method> - <method name="intersect_3"> + <method name="intersect_3" qualifiers="const"> <return type="Variant"> </return> <argument index="0" name="b" type="Plane"> @@ -114,7 +114,7 @@ Returns the intersection point of the three planes [code]b[/code], [code]c[/code] and this plane. If no intersection is found, [code]null[/code] is returned. </description> </method> - <method name="intersects_ray"> + <method name="intersects_ray" qualifiers="const"> <return type="Variant"> </return> <argument index="0" name="from" type="Vector3"> @@ -125,7 +125,7 @@ Returns the intersection point of a ray consisting of the position [code]from[/code] and the direction normal [code]dir[/code] with this plane. If no intersection is found, [code]null[/code] is returned. </description> </method> - <method name="intersects_segment"> + <method name="intersects_segment" qualifiers="const"> <return type="Variant"> </return> <argument index="0" name="from" type="Vector3"> @@ -136,7 +136,7 @@ Returns the intersection point of a segment from position [code]begin[/code] to position [code]end[/code] with this plane. If no intersection is found, [code]null[/code] is returned. </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="to_plane" type="Plane"> @@ -145,7 +145,7 @@ Returns [code]true[/code] if this plane and [code]plane[/code] are approximately equal, by running [method @GlobalScope.is_equal_approx] on each component. </description> </method> - <method name="is_point_over"> + <method name="is_point_over" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="plane" type="Vector3"> @@ -154,7 +154,7 @@ Returns [code]true[/code] if [code]point[/code] is located above the plane. </description> </method> - <method name="normalized"> + <method name="normalized" qualifiers="const"> <return type="Plane"> </return> <description> @@ -189,7 +189,7 @@ <description> </description> </method> - <method name="project"> + <method name="project" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="point" type="Vector3"> diff --git a/doc/classes/PopupMenu.xml b/doc/classes/PopupMenu.xml index 4be81e256e..418785222e 100644 --- a/doc/classes/PopupMenu.xml +++ b/doc/classes/PopupMenu.xml @@ -565,7 +565,7 @@ <argument index="1" name="state" type="int"> </argument> <description> - Sets the state of an multistate item. See [method add_multistate_item] for details. + Sets the state of a multistate item. See [method add_multistate_item] for details. </description> </method> <method name="set_item_opentype_feature"> @@ -664,13 +664,13 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Cycle to the next state of an multistate item. See [method add_multistate_item] for details. + Cycle to the next state of a multistate item. See [method add_multistate_item] for details. </description> </method> </methods> <members> <member name="allow_search" type="bool" setter="set_allow_search" getter="get_allow_search" default="true"> - If [code]true[/code], allows to navigate [PopupMenu] with letter keys. + If [code]true[/code], allows navigating [PopupMenu] with letter keys. </member> <member name="hide_on_checkable_item_selection" type="bool" setter="set_hide_on_checkable_item_selection" getter="is_hide_on_checkable_item_selection" default="true"> If [code]true[/code], hides the [PopupMenu] when a checkbox or radio button is selected. @@ -717,18 +717,21 @@ <theme_item name="font" type="Font"> [Font] used for the menu items. </theme_item> - <theme_item name="font_color" type="Color" default="Color( 0.88, 0.88, 0.88, 1 )"> - The default text [Color] for menu items' names. - </theme_item> <theme_item name="font_accelerator_color" type="Color" default="Color( 0.7, 0.7, 0.7, 0.8 )"> The text [Color] used for shortcuts and accelerators that show next to the menu item name when defined. See [method get_item_accelerator] for more info on accelerators. </theme_item> + <theme_item name="font_color" type="Color" default="Color( 0.88, 0.88, 0.88, 1 )"> + The default text [Color] for menu items' names. + </theme_item> <theme_item name="font_disabled_color" type="Color" default="Color( 0.4, 0.4, 0.4, 0.8 )"> [Color] used for disabled menu items' text. </theme_item> <theme_item name="font_hover_color" type="Color" default="Color( 0.88, 0.88, 0.88, 1 )"> [Color] used for the hovered text. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the menu item. + </theme_item> <theme_item name="font_separator_color" type="Color" default="Color( 0.88, 0.88, 0.88, 1 )"> [Color] used for labeled separators' text. See [method add_separator]. </theme_item> @@ -741,12 +744,19 @@ <theme_item name="hseparation" type="int" default="4"> The horizontal space between the item's name and the shortcut text/submenu arrow. </theme_item> + <theme_item name="item_end_padding" type="int" default="2"> + </theme_item> + <theme_item name="item_start_padding" type="int" default="2"> + </theme_item> <theme_item name="labeled_separator_left" type="StyleBox"> [StyleBox] for the left side of labeled separator. See [method add_separator]. </theme_item> <theme_item name="labeled_separator_right" type="StyleBox"> [StyleBox] for the right side of labeled separator. See [method add_separator]. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the item text outline. + </theme_item> <theme_item name="panel" type="StyleBox"> Default [StyleBox] of the [PopupMenu] items. </theme_item> diff --git a/doc/classes/PrimitiveMesh.xml b/doc/classes/PrimitiveMesh.xml index 25943f6d47..8b73bcb9c1 100644 --- a/doc/classes/PrimitiveMesh.xml +++ b/doc/classes/PrimitiveMesh.xml @@ -31,7 +31,7 @@ </methods> <members> <member name="custom_aabb" type="AABB" setter="set_custom_aabb" getter="get_custom_aabb" default="AABB( 0, 0, 0, 0, 0, 0 )"> - Overrides the [AABB] with one defined by user for use with frustum culling. Especially useful to avoid unnexpected culling when using a shader to offset vertices. + Overrides the [AABB] with one defined by user for use with frustum culling. Especially useful to avoid unexpected culling when using a shader to offset vertices. </member> <member name="flip_faces" type="bool" setter="set_flip_faces" getter="get_flip_faces" default="false"> If set, the order of the vertices in each triangle are reversed resulting in the backside of the mesh being drawn. diff --git a/doc/classes/ProgressBar.xml b/doc/classes/ProgressBar.xml index bb7fd31ee8..160b61c720 100644 --- a/doc/classes/ProgressBar.xml +++ b/doc/classes/ProgressBar.xml @@ -32,11 +32,17 @@ <theme_item name="font_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> The color of the text. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [ProgressBar]. + </theme_item> <theme_item name="font_shadow_color" type="Color" default="Color( 0, 0, 0, 1 )"> The color of the text's shadow. </theme_item> <theme_item name="font_size" type="int"> Font size used to draw the fill percentage if [member percent_visible] is [code]true[/code]. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> </theme_items> </class> diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index a82cf9a2a9..5b9150ab04 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -169,6 +169,7 @@ </return> <description> Saves the configuration to the [code]project.godot[/code] file. + [b]Note:[/b] This method is intended to be used by editor plugins, as modified [ProjectSettings] can't be loaded back in the running app. If you want to change project settings in exported projects, use [method save_custom] to save [code]override.cfg[/code] file. </description> </method> <method name="save_custom"> @@ -177,7 +178,7 @@ <argument index="0" name="file" type="String"> </argument> <description> - Saves the configuration to a custom file. The file extension must be [code].godot[/code] (to save in text-based [ConfigFile] format) or [code].binary[/code] (to save in binary format). + Saves the configuration to a custom file. The file extension must be [code].godot[/code] (to save in text-based [ConfigFile] format) or [code].binary[/code] (to save in binary format). You can also save [code]override.cfg[/code] file, which is also text, but can be used in exported projects unlike other formats. </description> </method> <method name="set_initial_value"> @@ -273,9 +274,11 @@ If [code]true[/code], flushes the standard output stream every time a line is printed. This affects both terminal logging and file logging. When running a project, this setting must be enabled if you want logs to be collected by service managers such as systemd/journalctl. This setting is disabled by default on release builds, since flushing on every printed line will negatively affect performance if lots of lines are printed in a rapid succession. Also, if this setting is enabled, logged files will still be written successfully if the application crashes or is otherwise killed by the user (without being closed "normally"). [b]Note:[/b] Regardless of this setting, the standard error stream ([code]stderr[/code]) is always flushed when a line is printed to it. + Changes to this setting will only be applied upon restarting the application. </member> <member name="application/run/flush_stdout_on_print.debug" type="bool" setter="" getter="" default="true"> Debug build override for [member application/run/flush_stdout_on_print], as performance is less important during debugging. + Changes to this setting will only be applied upon restarting the application. </member> <member name="application/run/frame_delay_msec" type="int" setter="" getter="" default="0"> Forces a delay between frames in the main loop (in milliseconds). This may be useful if you plan to disable vertical synchronization. @@ -289,31 +292,31 @@ <member name="application/run/main_scene" type="String" setter="" getter="" default=""""> Path to the main scene file that will be loaded when the project runs. </member> - <member name="audio/channel_disable_threshold_db" type="float" setter="" getter="" default="-60.0"> + <member name="audio/buses/channel_disable_threshold_db" type="float" setter="" getter="" default="-60.0"> Audio buses will disable automatically when sound goes below a given dB threshold for a given time. This saves CPU as effects assigned to that bus will no longer do any processing. </member> - <member name="audio/channel_disable_time" type="float" setter="" getter="" default="2.0"> + <member name="audio/buses/channel_disable_time" type="float" setter="" getter="" default="2.0"> Audio buses will disable automatically when sound goes below a given dB threshold for a given time. This saves CPU as effects assigned to that bus will no longer do any processing. </member> - <member name="audio/default_bus_layout" type="String" setter="" getter="" default=""res://default_bus_layout.tres""> + <member name="audio/buses/default_bus_layout" type="String" setter="" getter="" default=""res://default_bus_layout.tres""> Default [AudioBusLayout] resource file to use in the project, unless overridden by the scene. </member> - <member name="audio/driver" type="String" setter="" getter=""> + <member name="audio/driver/driver" type="String" setter="" getter=""> Specifies the audio driver to use. This setting is platform-dependent as each platform supports different audio drivers. If left empty, the default audio driver will be used. </member> - <member name="audio/enable_audio_input" type="bool" setter="" getter="" default="false"> + <member name="audio/driver/enable_input" type="bool" setter="" getter="" default="false"> If [code]true[/code], microphone input will be allowed. This requires appropriate permissions to be set when exporting to Android or iOS. </member> - <member name="audio/mix_rate" type="int" setter="" getter="" default="44100"> + <member name="audio/driver/mix_rate" type="int" setter="" getter="" default="44100"> Mixing rate used for audio. In general, it's better to not touch this and leave it to the host operating system. </member> - <member name="audio/output_latency" type="int" setter="" getter="" default="15"> + <member name="audio/driver/output_latency" type="int" setter="" getter="" default="15"> Output latency in milliseconds for audio. Lower values will result in lower audio latency at the cost of increased CPU usage. Low values may result in audible cracking on slower hardware. </member> - <member name="audio/output_latency.web" type="int" setter="" getter="" default="50"> - Safer override for [member audio/output_latency] in the Web platform, to avoid audio issues especially on mobile devices. + <member name="audio/driver/output_latency.web" type="int" setter="" getter="" default="50"> + Safer override for [member audio/driver/output_latency] in the Web platform, to avoid audio issues especially on mobile devices. </member> - <member name="audio/video_delay_compensation_ms" type="int" setter="" getter="" default="0"> + <member name="audio/video/video_delay_compensation_ms" type="int" setter="" getter="" default="0"> Setting to hardcode audio delay when playing video. Best to leave this untouched unless you know what you are doing. </member> <member name="compression/formats/gzip/compression_level" type="int" setter="" getter="" default="-1"> @@ -331,6 +334,18 @@ <member name="compression/formats/zstd/window_log_size" type="int" setter="" getter="" default="27"> Largest size limit (in power of 2) allowed when compressing using long-distance matching with Zstandard. Higher values can result in better compression, but will require more memory when compressing and decompressing. </member> + <member name="debug/file_logging/enable_file_logging" type="bool" setter="" getter="" default="false"> + If [code]true[/code], logs all output to files. + </member> + <member name="debug/file_logging/enable_file_logging.pc" type="bool" setter="" getter="" default="true"> + Desktop override for [member debug/file_logging/enable_file_logging], as log files are not readily accessible on mobile/Web platforms. + </member> + <member name="debug/file_logging/log_path" type="String" setter="" getter="" default=""user://logs/godot.log""> + Path to logs within the project. Using an [code]user://[/code] path is recommended. + </member> + <member name="debug/file_logging/max_log_files" type="int" setter="" getter="" default="5"> + Specifies the maximum amount of log files allowed (used for rotation). + </member> <member name="debug/gdscript/completion/autocomplete_setters_and_getters" type="bool" setter="" getter="" default="false"> If [code]true[/code], displays getters and setters in autocompletion results in the script editor. This setting is meant to be used when porting old projects (Godot 2), as using member variables is the preferred style from Godot 3 onwards. </member> @@ -428,7 +443,7 @@ <member name="debug/settings/fps/force_fps" type="int" setter="" getter="" default="0"> Maximum number of frames per second allowed. The actual number of frames per second may still be below this value if the game is lagging. If [member display/window/vsync/use_vsync] is enabled, it takes precedence and the forced FPS number cannot exceed the monitor's refresh rate. - This setting is therefore mostly relevant for lowering the maximum FPS below VSync, e.g. to perform non real-time rendering of static frames, or test the project under lag conditions. + This setting is therefore mostly relevant for lowering the maximum FPS below VSync, e.g. to perform non-real-time rendering of static frames, or test the project under lag conditions. </member> <member name="debug/settings/gdscript/max_call_stack" type="int" setter="" getter="" default="1024"> Maximum call stack allowed for debugging GDScript. @@ -448,10 +463,13 @@ <member name="debug/shapes/collision/contact_color" type="Color" setter="" getter="" default="Color( 1, 0.2, 0.1, 0.8 )"> Color of the contact points between collision shapes, visible when "Visible Collision Shapes" is enabled in the Debug menu. </member> + <member name="debug/shapes/collision/draw_2d_outlines" type="bool" setter="" getter="" default="true"> + Sets whether 2D physics will display collision outlines in game when "Visible Collision Shapes" is enabled in the Debug menu. + </member> <member name="debug/shapes/collision/max_contacts_displayed" type="int" setter="" getter="" default="10000"> Maximum number of contact points between collision shapes to display when "Visible Collision Shapes" is enabled in the Debug menu. </member> - <member name="debug/shapes/collision/shape_color" type="Color" setter="" getter="" default="Color( 0, 0.6, 0.7, 0.5 )"> + <member name="debug/shapes/collision/shape_color" type="Color" setter="" getter="" default="Color( 0, 0.6, 0.7, 0.42 )"> Color of the collision shapes, visible when "Visible Collision Shapes" is enabled in the Debug menu. </member> <member name="debug/shapes/navigation/disabled_geometry_color" type="Color" setter="" getter="" default="Color( 1, 0.7, 0.1, 0.4 )"> @@ -470,14 +488,11 @@ Position offset for tooltips, relative to the mouse cursor's hotspot. </member> <member name="display/window/dpi/allow_hidpi" type="bool" setter="" getter="" default="false"> - If [code]true[/code], allows HiDPI display on Windows and macOS. This setting has no effect on desktop Linux, as DPI-awareness fallbacks are not supported there. + If [code]true[/code], allows HiDPI display on Windows, macOS, and the HTML5 platform. This setting has no effect on desktop Linux, as DPI-awareness fallbacks are not supported there. </member> <member name="display/window/energy_saving/keep_screen_on" type="bool" setter="" getter="" default="true"> If [code]true[/code], keeps the screen on (even in case of inactivity), so the screensaver does not take over. Works on desktop and mobile platforms. </member> - <member name="display/window/force_right_to_left_layout_direction" type="bool" setter="" getter="" default="false"> - Force layout direction and text writing direction to RTL for all locales. - </member> <member name="display/window/handheld/orientation" type="String" setter="" getter="" default=""landscape""> Default orientation on mobile devices. </member> @@ -513,12 +528,6 @@ <member name="display/window/size/width" type="int" setter="" getter="" default="1024"> Sets the game's main viewport width. On desktop platforms, this is the default window size. Stretch mode settings also use this as a reference when enabled. </member> - <member name="display/window/tablet_driver" type="String" setter="" getter=""> - Specifies the tablet driver to use. If left empty, the default driver will be used. - </member> - <member name="display/window/text_name" type="String" setter="" getter="" default=""""> - Specifies the [TextServer] to use. If left empty, the default will be used. - </member> <member name="display/window/vsync/use_vsync" type="bool" setter="" getter="" default="true"> If [code]true[/code], enables vertical synchronization. This eliminates tearing that may appear in moving scenes, at the cost of higher input latency and stuttering at lower framerates. If [code]false[/code], vertical synchronization will be disabled, however, many platforms will enforce it regardless (such as mobile platforms and HTML5). </member> @@ -526,12 +535,18 @@ If [code]Use Vsync[/code] is enabled and this setting is [code]true[/code], enables vertical synchronization via the operating system's window compositor when in windowed mode and the compositor is enabled. This will prevent stutter in certain situations. (Windows only.) [b]Note:[/b] This option is experimental and meant to alleviate stutter experienced by some users. However, some users have experienced a Vsync framerate halving (e.g. from 60 FPS to 30 FPS) when using it. </member> - <member name="editor/script_templates_search_path" type="String" setter="" getter="" default=""res://script_templates""> - Search path for project-specific script templates. Godot will search for script templates both in the editor-specific path and in this project-specific path. + <member name="editor/node_naming/name_casing" type="int" setter="" getter="" default="0"> + When creating node names automatically, set the type of casing in this project. This is mostly an editor setting. + </member> + <member name="editor/node_naming/name_num_separator" type="int" setter="" getter="" default="0"> + What to use to separate node name from number. This is mostly an editor setting. </member> - <member name="editor/search_in_file_extensions" type="PackedStringArray" setter="" getter="" default="PackedStringArray( "gd", "shader" )"> + <member name="editor/script/search_in_file_extensions" type="PackedStringArray" setter="" getter="" default="PackedStringArray( "gd", "shader" )"> Text-based file extensions to include in the script editor's "Find in Files" feature. You can add e.g. [code]tscn[/code] if you wish to also parse your scene files, especially if you use built-in scripts which are serialized in the scene files. </member> + <member name="editor/script/templates_search_path" type="String" setter="" getter="" default=""res://script_templates""> + Search path for project-specific script templates. Godot will search for script templates both in the editor-specific path and in this project-specific path. + </member> <member name="gui/common/default_scroll_deadzone" type="int" setter="" getter="" default="0"> Default value for [member ScrollContainer.scroll_deadzone], which will be used for all [ScrollContainer]s unless overridden. </member> @@ -566,6 +581,10 @@ Default [InputEventAction] to discard a modal or pending input. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> + <member name="input/ui_copy" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_cut" type="Dictionary" setter="" getter=""> + </member> <member name="input/ui_down" type="Dictionary" setter="" getter=""> Default [InputEventAction] to move down in the UI. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. @@ -574,6 +593,12 @@ Default [InputEventAction] to go to the end position of a [Control] (e.g. last item in an [ItemList] or a [Tree]), matching the behavior of [constant KEY_END] on typical desktop UI systems. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> + <member name="input/ui_filedialog_refresh" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_filedialog_show_hidden" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_filedialog_up_one_level" type="Dictionary" setter="" getter=""> + </member> <member name="input/ui_focus_next" type="Dictionary" setter="" getter=""> Default [InputEventAction] to focus the next [Control] in the scene. The focus behavior can be configured via [member Control.focus_next]. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. @@ -582,6 +607,10 @@ Default [InputEventAction] to focus the previous [Control] in the scene. The focus behavior can be configured via [member Control.focus_previous]. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> + <member name="input/ui_graph_delete" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_graph_duplicate" type="Dictionary" setter="" getter=""> + </member> <member name="input/ui_home" type="Dictionary" setter="" getter=""> Default [InputEventAction] to go to the start position of a [Control] (e.g. first item in an [ItemList] or a [Tree]), matching the behavior of [constant KEY_HOME] on typical desktop UI systems. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. @@ -590,6 +619,8 @@ Default [InputEventAction] to move left in the UI. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> + <member name="input/ui_menu" type="Dictionary" setter="" getter=""> + </member> <member name="input/ui_page_down" type="Dictionary" setter="" getter=""> Default [InputEventAction] to go down a page in a [Control] (e.g. in an [ItemList] or a [Tree]), matching the behavior of [constant KEY_PAGEDOWN] on typical desktop UI systems. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. @@ -598,6 +629,10 @@ Default [InputEventAction] to go up a page in a [Control] (e.g. in an [ItemList] or a [Tree]), matching the behavior of [constant KEY_PAGEUP] on typical desktop UI systems. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> + <member name="input/ui_paste" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_redo" type="Dictionary" setter="" getter=""> + </member> <member name="input/ui_right" type="Dictionary" setter="" getter=""> Default [InputEventAction] to move right in the UI. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. @@ -606,10 +641,102 @@ Default [InputEventAction] to select an item in a [Control] (e.g. in an [ItemList] or a [Tree]). [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> + <member name="input/ui_swap_input_direction" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_backspace" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_backspace_all_to_left" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_backspace_all_to_left.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_backspace_word" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_backspace_word.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_document_end" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_document_end.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_document_start" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_document_start.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_down" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_left" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_line_end" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_line_end.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_line_start" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_line_start.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_page_down" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_page_up" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_right" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_up" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_word_left" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_word_left.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_word_right" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_caret_word_right.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_completion_accept" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_completion_query" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_dedent" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_delete" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_delete_all_to_right" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_delete_all_to_right.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_delete_word" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_delete_word.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_indent" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_newline" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_newline_above" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_newline_blank" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_scroll_down" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_scroll_down.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_scroll_up" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_scroll_up.OSX" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_select_all" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_text_toggle_insert_mode" type="Dictionary" setter="" getter=""> + </member> + <member name="input/ui_undo" type="Dictionary" setter="" getter=""> + </member> <member name="input/ui_up" type="Dictionary" setter="" getter=""> Default [InputEventAction] to move up in the UI. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> + <member name="input_devices/pen_tablet/driver" type="String" setter="" getter=""> + Specifies the tablet driver to use. If left empty, the default driver will be used. + </member> + <member name="input_devices/pen_tablet/driver.Windows" type="String" setter="" getter=""> + Override for [member input_devices/pen_tablet/driver] on Windows. + </member> <member name="input_devices/pointing/emulate_mouse_from_touch" type="bool" setter="" getter="" default="true"> If [code]true[/code], sends mouse input events when tapping or swiping on the touchscreen. </member> @@ -619,6 +746,78 @@ <member name="input_devices/pointing/ios/touch_delay" type="float" setter="" getter="" default="0.15"> Default delay for touch events. This only affects iOS devices. </member> + <member name="internationalization/locale/fallback" type="String" setter="" getter="" default=""en""> + The locale to fall back to if a translation isn't available in a given language. If left empty, [code]en[/code] (English) will be used. + </member> + <member name="internationalization/locale/test" type="String" setter="" getter="" default=""""> + If non-empty, this locale will be used when running the project from the editor. + </member> + <member name="internationalization/rendering/force_right_to_left_layout_direction" type="bool" setter="" getter="" default="false"> + Force layout direction and text writing direction to RTL for all locales. + </member> + <member name="internationalization/rendering/text_driver" type="String" setter="" getter="" default=""""> + Specifies the [TextServer] to use. If left empty, the default will be used. + </member> + <member name="layer_names/2d_navigation/layer_0" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 0. If left empty, the layer will display as "Layer 0". + </member> + <member name="layer_names/2d_navigation/layer_1" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 1. If left empty, the layer will display as "Layer 1". + </member> + <member name="layer_names/2d_navigation/layer_10" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 10. If left empty, the layer will display as "Layer 10". + </member> + <member name="layer_names/2d_navigation/layer_11" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 11. If left empty, the layer will display as "Layer 11". + </member> + <member name="layer_names/2d_navigation/layer_12" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 12. If left empty, the layer will display as "Layer 12". + </member> + <member name="layer_names/2d_navigation/layer_13" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 13. If left empty, the layer will display as "Layer 13". + </member> + <member name="layer_names/2d_navigation/layer_14" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 14. If left empty, the layer will display as "Layer 14". + </member> + <member name="layer_names/2d_navigation/layer_15" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 15. If left empty, the layer will display as "Layer 15". + </member> + <member name="layer_names/2d_navigation/layer_16" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 16. If left empty, the layer will display as "Layer 16". + </member> + <member name="layer_names/2d_navigation/layer_17" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 17. If left empty, the layer will display as "Layer 17". + </member> + <member name="layer_names/2d_navigation/layer_18" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 18. If left empty, the layer will display as "Layer 18". + </member> + <member name="layer_names/2d_navigation/layer_19" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 19. If left empty, the layer will display as "Layer 19". + </member> + <member name="layer_names/2d_navigation/layer_2" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 2. If left empty, the layer will display as "Layer 2". + </member> + <member name="layer_names/2d_navigation/layer_3" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 3. If left empty, the layer will display as "Layer 3". + </member> + <member name="layer_names/2d_navigation/layer_4" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 4. If left empty, the layer will display as "Layer 4". + </member> + <member name="layer_names/2d_navigation/layer_5" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 5. If left empty, the layer will display as "Layer 5". + </member> + <member name="layer_names/2d_navigation/layer_6" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 6. If left empty, the layer will display as "Layer 6". + </member> + <member name="layer_names/2d_navigation/layer_7" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 7. If left empty, the layer will display as "Layer 7". + </member> + <member name="layer_names/2d_navigation/layer_8" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 8. If left empty, the layer will display as "Layer 8". + </member> + <member name="layer_names/2d_navigation/layer_9" type="String" setter="" getter="" default=""""> + Optional name for the 2D navigation layer 9. If left empty, the layer will display as "Layer 9". + </member> <member name="layer_names/2d_physics/layer_0" type="String" setter="" getter="" default=""""> Optional name for the 2D physics layer 0. If left empty, the layer will display as "Layer 0". </member> @@ -739,6 +938,66 @@ <member name="layer_names/2d_render/layer_9" type="String" setter="" getter="" default=""""> Optional name for the 2D render layer 9. If left empty, the layer will display as "Layer 9". </member> + <member name="layer_names/3d_navigation/layer_0" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 0. If left empty, the layer will display as "Layer 0". + </member> + <member name="layer_names/3d_navigation/layer_1" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 1. If left empty, the layer will display as "Layer 1". + </member> + <member name="layer_names/3d_navigation/layer_10" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 10. If left empty, the layer will display as "Layer 10". + </member> + <member name="layer_names/3d_navigation/layer_11" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 11. If left empty, the layer will display as "Layer 11". + </member> + <member name="layer_names/3d_navigation/layer_12" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 12. If left empty, the layer will display as "Layer 12". + </member> + <member name="layer_names/3d_navigation/layer_13" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 13. If left empty, the layer will display as "Layer 13". + </member> + <member name="layer_names/3d_navigation/layer_14" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 14. If left empty, the layer will display as "Layer 14". + </member> + <member name="layer_names/3d_navigation/layer_15" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 15. If left empty, the layer will display as "Layer 15". + </member> + <member name="layer_names/3d_navigation/layer_16" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 16. If left empty, the layer will display as "Layer 16". + </member> + <member name="layer_names/3d_navigation/layer_17" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 17. If left empty, the layer will display as "Layer 17". + </member> + <member name="layer_names/3d_navigation/layer_18" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 18. If left empty, the layer will display as "Layer 18". + </member> + <member name="layer_names/3d_navigation/layer_19" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 19. If left empty, the layer will display as "Layer 19". + </member> + <member name="layer_names/3d_navigation/layer_2" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 2. If left empty, the layer will display as "Layer 2". + </member> + <member name="layer_names/3d_navigation/layer_3" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 3. If left empty, the layer will display as "Layer 3". + </member> + <member name="layer_names/3d_navigation/layer_4" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 4. If left empty, the layer will display as "Layer 4". + </member> + <member name="layer_names/3d_navigation/layer_5" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 5. If left empty, the layer will display as "Layer 5". + </member> + <member name="layer_names/3d_navigation/layer_6" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 6. If left empty, the layer will display as "Layer 6". + </member> + <member name="layer_names/3d_navigation/layer_7" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 7. If left empty, the layer will display as "Layer 7". + </member> + <member name="layer_names/3d_navigation/layer_8" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 8. If left empty, the layer will display as "Layer 8". + </member> + <member name="layer_names/3d_navigation/layer_9" type="String" setter="" getter="" default=""""> + Optional name for the 3D navigation layer 9. If left empty, the layer will display as "Layer 9". + </member> <member name="layer_names/3d_physics/layer_0" type="String" setter="" getter="" default=""""> Optional name for the 3D physics layer 0. If left empty, the layer will display as "Layer 0". </member> @@ -859,24 +1118,6 @@ <member name="layer_names/3d_render/layer_9" type="String" setter="" getter="" default=""""> Optional name for the 3D render layer 9. If left empty, the layer will display as "Layer 9". </member> - <member name="locale/fallback" type="String" setter="" getter="" default=""en""> - The locale to fall back to if a translation isn't available in a given language. If left empty, [code]en[/code] (English) will be used. - </member> - <member name="locale/test" type="String" setter="" getter="" default=""""> - If non-empty, this locale will be used when running the project from the editor. - </member> - <member name="logging/file_logging/enable_file_logging" type="bool" setter="" getter="" default="false"> - If [code]true[/code], logs all output to files. - </member> - <member name="logging/file_logging/enable_file_logging.pc" type="bool" setter="" getter="" default="true"> - Desktop override for [member logging/file_logging/enable_file_logging], as log files are not readily accessible on mobile/Web platforms. - </member> - <member name="logging/file_logging/log_path" type="String" setter="" getter="" default=""user://logs/godot.log""> - Path to logs within the project. Using an [code]user://[/code] path is recommended. - </member> - <member name="logging/file_logging/max_log_files" type="int" setter="" getter="" default="5"> - Specifies the maximum amount of log files allowed (used for rotation). - </member> <member name="memory/limits/command_queue/multithreading_queue_size_kb" type="int" setter="" getter="" default="256"> </member> <member name="memory/limits/message_queue/max_size_kb" type="int" setter="" getter="" default="4096"> @@ -899,6 +1140,18 @@ </member> <member name="mono/unhandled_exception_policy" type="int" setter="" getter="" default="0"> </member> + <member name="navigation/2d/default_cell_size" type="int" setter="" getter="" default="10"> + Default cell size for 2D navigation maps. See [method NavigationServer2D.map_set_cell_size]. + </member> + <member name="navigation/2d/default_edge_connection_margin" type="int" setter="" getter="" default="5"> + Default edge connection margin for 2D navigation maps. See [method NavigationServer2D.map_set_edge_connection_margin]. + </member> + <member name="navigation/3d/default_cell_size" type="float" setter="" getter="" default="0.3"> + Default cell size for 3D navigation maps. See [method NavigationServer3D.map_set_cell_size]. + </member> + <member name="navigation/3d/default_edge_connection_margin" type="float" setter="" getter="" default="5.0"> + Default edge connection margin for 3D navigation maps. See [method NavigationServer3D.map_set_edge_connection_margin]. + </member> <member name="network/limits/debugger/max_chars_per_second" type="int" setter="" getter="" default="32768"> Maximum amount of characters allowed to send as output from the debugger. Over this value, content is dropped. This helps not to stall the debugger connection. </member> @@ -930,12 +1183,6 @@ The CA certificates bundle to use for SSL connections. If this is set to a non-empty value, this will [i]override[/i] Godot's default [url=https://github.com/godotengine/godot/blob/master/thirdparty/certs/ca-certificates.crt]Mozilla certificate bundle[/url]. If left empty, the default certificate bundle will be used. If in doubt, leave this setting empty. </member> - <member name="node/name_casing" type="int" setter="" getter="" default="0"> - When creating node names automatically, set the type of casing in this project. This is mostly an editor setting. - </member> - <member name="node/name_num_separator" type="int" setter="" getter="" default="0"> - What to use to separate node name from number. This is mostly an editor setting. - </member> <member name="physics/2d/bp_hash_table_size" type="int" setter="" getter="" default="4096"> Size of the hash table used for the broad-phase 2D hash grid algorithm. </member> @@ -985,22 +1232,18 @@ Sets which physics engine to use for 2D physics. "DEFAULT" and "GodotPhysics2D" are the same, as there is currently no alternative 2D physics server implemented. </member> + <member name="physics/2d/run_on_thread" type="bool" setter="" getter="" default="false"> + Sets whether 2D physics is run on the main thread or a separate one. Running the server on a thread increases performance, but restricts API access to only physics process. + </member> <member name="physics/2d/sleep_threshold_angular" type="float" setter="" getter="" default="0.139626"> Threshold angular velocity under which a 2D physics body will be considered inactive. See [constant PhysicsServer2D.SPACE_PARAM_BODY_ANGULAR_VELOCITY_SLEEP_THRESHOLD]. </member> <member name="physics/2d/sleep_threshold_linear" type="float" setter="" getter="" default="2.0"> Threshold linear velocity under which a 2D physics body will be considered inactive. See [constant PhysicsServer2D.SPACE_PARAM_BODY_LINEAR_VELOCITY_SLEEP_THRESHOLD]. </member> - <member name="physics/2d/thread_model" type="int" setter="" getter="" default="1"> - Sets whether physics is run on the main thread or a separate one. Running the server on a thread increases performance, but restricts API access to only physics process. - [b]Warning:[/b] As of Godot 3.2, there are mixed reports about the use of a Multi-Threaded thread model for physics. Be sure to assess whether it does give you extra performance and no regressions when using it. - </member> <member name="physics/2d/time_before_sleep" type="float" setter="" getter="" default="0.5"> Time (in seconds) of inactivity before which a 2D physics body will put to sleep. See [constant PhysicsServer2D.SPACE_PARAM_BODY_TIME_TO_SLEEP]. </member> - <member name="physics/3d/active_soft_world" type="bool" setter="" getter="" default="true"> - Sets whether the 3D physics world will be created with support for [SoftBody3D] physics. Only applies to the Bullet physics engine. - </member> <member name="physics/3d/default_angular_damp" type="float" setter="" getter="" default="0.1"> The default angular damp in 3D. [b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. At value [code]0[/code] objects will keep moving with the same velocity. Values greater than [code]1[/code] will aim to reduce the velocity to [code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim to reduce the velocity to [code]0[/code] in half a second. A value equal to or greater than the physics frame rate ([member ProjectSettings.physics/common/physics_fps], [code]60[/code] by default) will bring the object to a stop in one iteration. @@ -1041,6 +1284,15 @@ Sets which physics engine to use for 3D physics. "DEFAULT" is currently the [url=https://bulletphysics.org]Bullet[/url] physics engine. The "GodotPhysics3D" engine is still supported as an alternative. </member> + <member name="physics/3d/run_on_thread" type="bool" setter="" getter="" default="false"> + Sets whether 3D physics is run on the main thread or a separate one. Running the server on a thread increases performance, but restricts API access to only physics process. + </member> + <member name="physics/3d/sleep_threshold_angular" type="float" setter="" getter="" default="0.139626"> + </member> + <member name="physics/3d/sleep_threshold_linear" type="float" setter="" getter="" default="0.1"> + </member> + <member name="physics/3d/time_before_sleep" type="float" setter="" getter="" default="0.5"> + </member> <member name="physics/common/enable_object_picking" type="bool" setter="" getter="" default="true"> Enables [member Viewport.physics_object_picking] on the root viewport. </member> @@ -1052,273 +1304,269 @@ Fix to improve physics jitter, specially on monitors where refresh rate is different than the physics FPS. [b]Note:[/b] This property is only read when the project starts. To change the physics FPS at runtime, set [member Engine.physics_jitter_fix] instead. </member> - <member name="rendering/environment/default_clear_color" type="Color" setter="" getter="" default="Color( 0.3, 0.3, 0.3, 1 )"> - Default background clear color. Overridable per [Viewport] using its [Environment]. See [member Environment.background_mode] and [member Environment.background_color] in particular. To change this default color programmatically, use [method RenderingServer.set_default_clear_color]. + <member name="rendering/2d/sdf/oversize" type="int" setter="" getter="" default="1"> </member> - <member name="rendering/environment/default_environment" type="String" setter="" getter="" default=""""> - [Environment] that will be used as a fallback environment in case a scene does not specify its own environment. The default environment is loaded in at scene load time regardless of whether you have set an environment or not. If you do not rely on the fallback environment, it is best to delete [code]default_env.tres[/code], or to specify a different default environment here. + <member name="rendering/2d/sdf/scale" type="int" setter="" getter="" default="1"> </member> - <member name="rendering/forward_renderer/threaded_render_minimum_instances" type="int" setter="" getter="" default="500"> + <member name="rendering/2d/shadow_atlas/size" type="int" setter="" getter="" default="2048"> </member> - <member name="rendering/gpu_lightmapper/performance/max_rays_per_pass" type="int" setter="" getter="" default="32"> + <member name="rendering/2d/snap/snap_2d_transforms_to_pixel" type="bool" setter="" getter="" default="false"> </member> - <member name="rendering/gpu_lightmapper/performance/max_rays_per_probe_pass" type="int" setter="" getter="" default="64"> + <member name="rendering/2d/snap/snap_2d_vertices_to_pixel" type="bool" setter="" getter="" default="false"> </member> - <member name="rendering/gpu_lightmapper/performance/region_size" type="int" setter="" getter="" default="512"> + <member name="rendering/anti_aliasing/quality/msaa" type="int" setter="" getter="" default="0"> + Sets the number of MSAA samples to use (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. </member> - <member name="rendering/gpu_lightmapper/quality/high_quality_probe_ray_count" type="int" setter="" getter="" default="512"> + <member name="rendering/anti_aliasing/quality/screen_space_aa" type="int" setter="" getter="" default="0"> + Sets the screen-space antialiasing mode for the default screen [Viewport]. Screen-space antialiasing works by selectively blurring edges in a post-process shader. It differs from MSAA which takes multiple coverage samples while rendering objects. Screen-space AA methods are typically faster than MSAA and will smooth out specular aliasing, but tend to make scenes appear blurry. + Another way to combat specular aliasing is to enable [member rendering/anti_aliasing/screen_space_roughness_limiter/enabled]. </member> - <member name="rendering/gpu_lightmapper/quality/high_quality_ray_count" type="int" setter="" getter="" default="256"> + <member name="rendering/anti_aliasing/quality/use_debanding" type="bool" setter="" getter="" default="false"> </member> - <member name="rendering/gpu_lightmapper/quality/low_quality_probe_ray_count" type="int" setter="" getter="" default="64"> + <member name="rendering/anti_aliasing/screen_space_roughness_limiter/amount" type="float" setter="" getter="" default="0.25"> </member> - <member name="rendering/gpu_lightmapper/quality/low_quality_ray_count" type="int" setter="" getter="" default="16"> + <member name="rendering/anti_aliasing/screen_space_roughness_limiter/enabled" type="bool" setter="" getter="" default="true"> </member> - <member name="rendering/gpu_lightmapper/quality/medium_quality_probe_ray_count" type="int" setter="" getter="" default="256"> + <member name="rendering/anti_aliasing/screen_space_roughness_limiter/limit" type="float" setter="" getter="" default="0.18"> </member> - <member name="rendering/gpu_lightmapper/quality/medium_quality_ray_count" type="int" setter="" getter="" default="64"> + <member name="rendering/camera/depth_of_field/depth_of_field_bokeh_quality" type="int" setter="" getter="" default="2"> + Sets the quality of the depth of field effect. Higher quality takes more samples, which is slower but looks smoother. </member> - <member name="rendering/gpu_lightmapper/quality/ultra_quality_probe_ray_count" type="int" setter="" getter="" default="2048"> + <member name="rendering/camera/depth_of_field/depth_of_field_bokeh_shape" type="int" setter="" getter="" default="1"> + Sets the depth of field shape. Can be Box, Hexagon, or Circle. Box is the fastest. Circle is the most realistic, but also the most expensive to compute. </member> - <member name="rendering/gpu_lightmapper/quality/ultra_quality_ray_count" type="int" setter="" getter="" default="1024"> + <member name="rendering/camera/depth_of_field/depth_of_field_use_jitter" type="bool" setter="" getter="" default="false"> + If [code]true[/code], jitters DOF samples to make effect slightly blurrier and hide lines created from low sample rates. This can result in a slightly grainy appearance when used with a low number of samples. </member> - <member name="rendering/high_end/global_shader_variables_buffer_size" type="int" setter="" getter="" default="65536"> + <member name="rendering/driver/depth_prepass/disable_for_vendors" type="String" setter="" getter="" default=""PowerVR,Mali,Adreno,Apple""> + Disables depth pre-pass for some GPU vendors (usually mobile), as their architecture already does this. </member> - <member name="rendering/lightmapper/probe_capture_update_speed" type="float" setter="" getter="" default="15"> + <member name="rendering/driver/depth_prepass/enable" type="bool" setter="" getter="" default="true"> + If [code]true[/code], performs a previous depth pass before rendering materials. This increases performance in scenes with high overdraw, when complex materials and lighting are used. </member> - <member name="rendering/limits/rendering/max_renderable_elements" type="int" setter="" getter="" default="128000"> - Max amount of elements renderable in a frame. If more than this are visible per frame, they will be dropped. Keep in mind elements refer to mesh surfaces and not meshes themselves. + <member name="rendering/driver/driver_name" type="String" setter="" getter="" default=""Vulkan""> + The video driver to use (currently only "Vulkan" is implemented). + [b]Note:[/b] The backend in use can be overridden at runtime via the [code]--rendering-driver[/code] command line argument. + [b]FIXME:[/b] No longer valid after DisplayServer split: + In such cases, this property is not updated, so use [code]OS.get_current_video_driver[/code] to query it at run-time. </member> - <member name="rendering/limits/time/time_rollover_secs" type="float" setter="" getter="" default="3600"> + <member name="rendering/driver/rd_renderer/use_low_end_renderer" type="bool" setter="" getter="" default="false"> </member> - <member name="rendering/quality/2d/snap_2d_transforms_to_pixel" type="bool" setter="" getter="" default="false"> + <member name="rendering/driver/rd_renderer/use_low_end_renderer.mobile" type="bool" setter="" getter="" default="true"> </member> - <member name="rendering/quality/2d/snap_2d_vertices_to_pixel" type="bool" setter="" getter="" default="false"> + <member name="rendering/driver/threads/thread_model" type="int" setter="" getter="" default="1"> + Thread model for rendering. Rendering on a thread can vastly improve performance, but synchronizing to the main thread can cause a bit more jitter. </member> - <member name="rendering/quality/2d_sdf/oversize" type="int" setter="" getter="" default="1"> + <member name="rendering/environment/defaults/default_clear_color" type="Color" setter="" getter="" default="Color( 0.3, 0.3, 0.3, 1 )"> + Default background clear color. Overridable per [Viewport] using its [Environment]. See [member Environment.background_mode] and [member Environment.background_color] in particular. To change this default color programmatically, use [method RenderingServer.set_default_clear_color]. </member> - <member name="rendering/quality/2d_sdf/scale" type="int" setter="" getter="" default="1"> + <member name="rendering/environment/defaults/default_environment" type="String" setter="" getter="" default=""""> + [Environment] that will be used as a fallback environment in case a scene does not specify its own environment. The default environment is loaded in at scene load time regardless of whether you have set an environment or not. If you do not rely on the fallback environment, it is best to delete [code]default_env.tres[/code], or to specify a different default environment here. </member> - <member name="rendering/quality/2d_shadow_atlas/size" type="int" setter="" getter="" default="2048"> + <member name="rendering/environment/glow/upscale_mode" type="int" setter="" getter="" default="1"> + Sets how the glow effect is upscaled before being copied onto the screen. Linear is faster, but looks blocky. Bicubic is slower but looks smooth. </member> - <member name="rendering/quality/depth_of_field/depth_of_field_bokeh_quality" type="int" setter="" getter="" default="2"> - Sets the quality of the depth of field effect. Higher quality takes more samples, which is slower but looks smoother. + <member name="rendering/environment/glow/upscale_mode.mobile" type="int" setter="" getter="" default="0"> + Lower-end override for [member rendering/environment/glow/upscale_mode] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/depth_of_field/depth_of_field_bokeh_shape" type="int" setter="" getter="" default="1"> - Sets the depth of field shape. Can be Box, Hexagon, or Circle. Box is the fastest. Circle is the most realistic, but also the most expensive to compute. + <member name="rendering/environment/glow/use_high_quality" type="bool" setter="" getter="" default="false"> + Takes more samples during downsample pass of glow. This ensures that single pixels are captured by glow which makes the glow look smoother and more stable during movement. However, it is very expensive and makes the glow post process take twice as long. </member> - <member name="rendering/quality/depth_of_field/depth_of_field_use_jitter" type="bool" setter="" getter="" default="false"> - If [code]true[/code], jitters DOF samples to make effect slightly blurrier and hide lines created from low sample rates. This can result in a slightly grainy appearance when used with a low number of samples. + <member name="rendering/environment/screen_space_reflection/roughness_quality" type="int" setter="" getter="" default="1"> + Sets the quality for rough screen-space reflections. Turning off will make all screen space reflections sharp, while higher values make rough reflections look better. </member> - <member name="rendering/quality/depth_prepass/disable_for_vendors" type="String" setter="" getter="" default=""PowerVR,Mali,Adreno,Apple""> - Disables depth pre-pass for some GPU vendors (usually mobile), as their architecture already does this. + <member name="rendering/environment/ssao/adaptive_target" type="float" setter="" getter="" default="0.5"> + Quality target to use when [member rendering/environment/ssao/quality] is set to [code]ULTRA[/code]. A value of [code]0.0[/code] provides a quality and speed similar to [code]MEDIUM[/code] while a value of [code]1.0[/code] provides much higher quality than any of the other settings at the cost of performance. </member> - <member name="rendering/quality/depth_prepass/enable" type="bool" setter="" getter="" default="true"> - If [code]true[/code], performs a previous depth pass before rendering materials. This increases performance in scenes with high overdraw, when complex materials and lighting are used. + <member name="rendering/environment/ssao/blur_passes" type="int" setter="" getter="" default="2"> + Number of blur passes to use when computing screen-space ambient occlusion. A higher number will result in a smoother look, but will be slower to compute and will have less high-frequency detail. </member> - <member name="rendering/quality/directional_shadow/size" type="int" setter="" getter="" default="4096"> - The directional shadow's size in pixels. Higher values will result in sharper shadows, at the cost of performance. The value will be rounded up to the nearest power of 2. + <member name="rendering/environment/ssao/fadeout_from" type="float" setter="" getter="" default="50.0"> + Distance at which the screen-space ambient occlusion effect starts to fade out. Use this hide ambient occlusion at great distances. </member> - <member name="rendering/quality/directional_shadow/size.mobile" type="int" setter="" getter="" default="2048"> - Lower-end override for [member rendering/quality/directional_shadow/size] on mobile devices, due to performance concerns or driver support. + <member name="rendering/environment/ssao/fadeout_to" type="float" setter="" getter="" default="300.0"> + Distance at which the screen-space ambient occlusion is fully faded out. Use this hide ambient occlusion at great distances. </member> - <member name="rendering/quality/directional_shadow/soft_shadow_quality" type="int" setter="" getter="" default="2"> - Quality setting for shadows cast by [DirectionalLight3D]s. Higher quality settings use more samples when reading from shadow maps and are thus slower. Low quality settings may result in shadows looking grainy. + <member name="rendering/environment/ssao/half_size" type="bool" setter="" getter="" default="false"> + If [code]true[/code], screen-space ambient occlusion will be rendered at half size and then upscaled before being added to the scene. This is significantly faster but may miss small details. </member> - <member name="rendering/quality/directional_shadow/soft_shadow_quality.mobile" type="int" setter="" getter="" default="0"> - Lower-end override for [member rendering/quality/directional_shadow/soft_shadow_quality] on mobile devices, due to performance concerns or driver support. + <member name="rendering/environment/ssao/half_size.mobile" type="bool" setter="" getter="" default="true"> + Lower-end override for [member rendering/environment/ssao/half_size] on mobile devices, due to performance concerns. </member> - <member name="rendering/quality/driver/driver_name" type="String" setter="" getter="" default=""Vulkan""> - The video driver to use ("GLES2" or "Vulkan"). - [b]Note:[/b] The backend in use can be overridden at runtime via the [code]--rendering-driver[/code] command line argument. - [b]FIXME:[/b] No longer valid after DisplayServer split: - In such cases, this property is not updated, so use [code]OS.get_current_video_driver[/code] to query it at run-time. + <member name="rendering/environment/ssao/quality" type="int" setter="" getter="" default="2"> + Sets the quality of the screen-space ambient occlusion effect. Higher values take more samples and so will result in better quality, at the cost of performance. Setting to [code]ULTRA[/code] will use the [member rendering/environment/ssao/adaptive_target] setting. </member> - <member name="rendering/quality/gi_probes/anisotropic" type="bool" setter="" getter="" default="false"> - If [code]true[/code], take additional samples when rendering objects affected by a [GIProbe] to reduce artifacts from only sampling in one direction. + <member name="rendering/environment/subsurface_scattering/subsurface_scattering_depth_scale" type="float" setter="" getter="" default="0.01"> + Scales the depth over which the subsurface scattering effect is applied. A high value may allow light to scatter into a part of the mesh or another mesh that is close in screen space but far in depth. </member> - <member name="rendering/quality/gi_probes/quality" type="int" setter="" getter="" default="1"> - Sets the number of cone samples taken when rendering objects affected by [GIProbe]s. + <member name="rendering/environment/subsurface_scattering/subsurface_scattering_quality" type="int" setter="" getter="" default="1"> + Sets the quality of the subsurface scattering effect. Higher values are slower but look nicer. </member> - <member name="rendering/quality/glow/upscale_mode" type="int" setter="" getter="" default="1"> - Sets how the glow effect is upscaled before being copied onto the screen. Linear is faster, but looks blocky. Bicubic is slower but looks smooth. + <member name="rendering/environment/subsurface_scattering/subsurface_scattering_scale" type="float" setter="" getter="" default="0.05"> + Scales the distance over which samples are taken for subsurface scattering effect. Changing this does not impact performance, but higher values will result in significant artifacts as the samples will become obviously spread out. A lower value results in a smaller spread of scattered light. </member> - <member name="rendering/quality/glow/upscale_mode.mobile" type="int" setter="" getter="" default="0"> - Lower-end override for [member rendering/quality/glow/upscale_mode] on mobile devices, due to performance concerns or driver support. + <member name="rendering/environment/volumetric_fog/use_filter" type="int" setter="" getter="" default="1"> </member> - <member name="rendering/quality/glow/use_high_quality" type="bool" setter="" getter="" default="false"> - Takes more samples during downsample pass of glow. This ensures that single pixels are captured by glow which makes the glow look smoother and more stable during movement. However, it is very expensive and makes the glow post process take twice as long. + <member name="rendering/environment/volumetric_fog/volume_depth" type="int" setter="" getter="" default="128"> </member> - <member name="rendering/quality/intended_usage/framebuffer_allocation" type="int" setter="" getter="" default="2"> - Strategy used for framebuffer allocation. The simpler it is, the less resources it uses (but the less features it supports). If set to "2D Without Sampling" or "3D Without Effects", sample buffers will not be allocated. This means [code]SCREEN_TEXTURE[/code] and [code]DEPTH_TEXTURE[/code] will not be available in shaders and post-processing effects will not be available in the [Environment]. + <member name="rendering/environment/volumetric_fog/volume_size" type="int" setter="" getter="" default="64"> </member> - <member name="rendering/quality/intended_usage/framebuffer_allocation.mobile" type="int" setter="" getter="" default="3"> - Lower-end override for [member rendering/quality/intended_usage/framebuffer_allocation] on mobile devices, due to performance concerns or driver support. + <member name="rendering/global_illumination/gi/use_half_resolution" type="bool" setter="" getter="" default="false"> </member> - <member name="rendering/quality/mesh_lod/threshold_pixels" type="float" setter="" getter="" default="1.0"> + <member name="rendering/global_illumination/gi_probes/anisotropic" type="bool" setter="" getter="" default="false"> + If [code]true[/code], take additional samples when rendering objects affected by a [GIProbe] to reduce artifacts from only sampling in one direction. </member> - <member name="rendering/quality/rd_renderer/use_low_end_renderer" type="bool" setter="" getter="" default="false"> + <member name="rendering/global_illumination/gi_probes/quality" type="int" setter="" getter="" default="1"> + Sets the number of cone samples taken when rendering objects affected by [GIProbe]s. </member> - <member name="rendering/quality/rd_renderer/use_low_end_renderer.mobile" type="bool" setter="" getter="" default="true"> + <member name="rendering/global_illumination/sdfgi/frames_to_converge" type="int" setter="" getter="" default="4"> </member> - <member name="rendering/quality/reflection_atlas/reflection_count" type="int" setter="" getter="" default="64"> - Number of cubemaps to store in the reflection atlas. The number of [ReflectionProbe]s in a scene will be limited by this amount. A higher number requires more VRAM. + <member name="rendering/global_illumination/sdfgi/frames_to_update_lights" type="int" setter="" getter="" default="2"> </member> - <member name="rendering/quality/reflection_atlas/reflection_size" type="int" setter="" getter="" default="256"> - Size of cubemap faces for [ReflectionProbe]s. A higher number requires more VRAM and may make reflection probe updating slower. + <member name="rendering/global_illumination/sdfgi/probe_ray_count" type="int" setter="" getter="" default="1"> </member> - <member name="rendering/quality/reflection_atlas/reflection_size.mobile" type="int" setter="" getter="" default="128"> - Lower-end override for [member rendering/quality/reflection_atlas/reflection_size] on mobile devices, due to performance concerns or driver support. + <member name="rendering/lightmapping/bake_performance/max_rays_per_pass" type="int" setter="" getter="" default="32"> </member> - <member name="rendering/quality/reflections/fast_filter_high_quality" type="bool" setter="" getter="" default="false"> - Use a higher quality variant of the fast filtering algorithm. Significantly slower than using default quality, but results in smoother reflections. Should only be used when the scene is especially detailed. + <member name="rendering/lightmapping/bake_performance/max_rays_per_probe_pass" type="int" setter="" getter="" default="64"> </member> - <member name="rendering/quality/reflections/ggx_samples" type="int" setter="" getter="" default="1024"> - Sets the number of samples to take when using importance sampling for [Sky]s and [ReflectionProbe]s. A higher value will result in smoother, higher quality reflections, but increases time to calculate radiance maps. In general, fewer samples are needed for simpler, low dynamic range environments while more samples are needed for HDR environments and environments with a high level of detail. + <member name="rendering/lightmapping/bake_performance/region_size" type="int" setter="" getter="" default="512"> </member> - <member name="rendering/quality/reflections/ggx_samples.mobile" type="int" setter="" getter="" default="128"> - Lower-end override for [member rendering/quality/reflections/ggx_samples] on mobile devices, due to performance concerns or driver support. + <member name="rendering/lightmapping/bake_quality/high_quality_probe_ray_count" type="int" setter="" getter="" default="512"> </member> - <member name="rendering/quality/reflections/roughness_layers" type="int" setter="" getter="" default="8"> - Limits the number of layers to use in radiance maps when using importance sampling. A lower number will be slightly faster and take up less VRAM. + <member name="rendering/lightmapping/bake_quality/high_quality_ray_count" type="int" setter="" getter="" default="256"> </member> - <member name="rendering/quality/reflections/texture_array_reflections" type="bool" setter="" getter="" default="true"> - If [code]true[/code], uses texture arrays instead of mipmaps for reflection probes and panorama backgrounds (sky). This reduces jitter noise and upscaling artifacts on reflections, but is significantly slower to compute and uses [member rendering/quality/reflections/roughness_layers] times more memory. + <member name="rendering/lightmapping/bake_quality/low_quality_probe_ray_count" type="int" setter="" getter="" default="64"> </member> - <member name="rendering/quality/reflections/texture_array_reflections.mobile" type="bool" setter="" getter="" default="false"> - Lower-end override for [member rendering/quality/reflections/texture_array_reflections] on mobile devices, due to performance concerns or driver support. + <member name="rendering/lightmapping/bake_quality/low_quality_ray_count" type="int" setter="" getter="" default="16"> </member> - <member name="rendering/quality/screen_filters/msaa" type="int" setter="" getter="" default="0"> - Sets the number of MSAA samples to use (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. - [b]Note:[/b] MSAA is not available on HTML5 export using the GLES2 backend. + <member name="rendering/lightmapping/bake_quality/medium_quality_probe_ray_count" type="int" setter="" getter="" default="256"> </member> - <member name="rendering/quality/screen_filters/screen_space_aa" type="int" setter="" getter="" default="0"> - Sets the screen-space antialiasing mode for the default screen [Viewport]. Screen-space antialiasing works by selectively blurring edges in a post-process shader. It differs from MSAA which takes multiple coverage samples while rendering objects. Screen-space AA methods are typically faster than MSAA and will smooth out specular aliasing, but tend to make scenes appear blurry. - Another way to combat specular aliasing is to enable [member rendering/quality/screen_filters/screen_space_roughness_limiter_enabled]. + <member name="rendering/lightmapping/bake_quality/medium_quality_ray_count" type="int" setter="" getter="" default="64"> </member> - <member name="rendering/quality/screen_filters/screen_space_roughness_limiter_amount" type="float" setter="" getter="" default="0.25"> + <member name="rendering/lightmapping/bake_quality/ultra_quality_probe_ray_count" type="int" setter="" getter="" default="2048"> </member> - <member name="rendering/quality/screen_filters/screen_space_roughness_limiter_enabled" type="bool" setter="" getter="" default="true"> + <member name="rendering/lightmapping/bake_quality/ultra_quality_ray_count" type="int" setter="" getter="" default="1024"> </member> - <member name="rendering/quality/screen_filters/screen_space_roughness_limiter_limit" type="float" setter="" getter="" default="0.18"> + <member name="rendering/lightmapping/probe_capture/update_speed" type="float" setter="" getter="" default="15"> </member> - <member name="rendering/quality/screen_filters/use_debanding" type="bool" setter="" getter="" default="false"> + <member name="rendering/limits/cluster_builder/max_clustered_elements" type="float" setter="" getter="" default="512"> </member> - <member name="rendering/quality/screen_space_reflection/roughness_quality" type="int" setter="" getter="" default="1"> - Sets the quality for rough screen-space reflections. Turning off will make all screen space reflections sharp, while higher values make rough reflections look better. + <member name="rendering/limits/forward_renderer/threaded_render_minimum_instances" type="int" setter="" getter="" default="500"> </member> - <member name="rendering/quality/shading/force_blinn_over_ggx" type="bool" setter="" getter="" default="false"> - If [code]true[/code], uses faster but lower-quality Blinn model to generate blurred reflections instead of the GGX model. + <member name="rendering/limits/global_shader_variables/buffer_size" type="int" setter="" getter="" default="65536"> </member> - <member name="rendering/quality/shading/force_blinn_over_ggx.mobile" type="bool" setter="" getter="" default="true"> - Lower-end override for [member rendering/quality/shading/force_blinn_over_ggx] on mobile devices, due to performance concerns or driver support. + <member name="rendering/limits/spatial_indexer/threaded_cull_minimum_instances" type="int" setter="" getter="" default="1000"> </member> - <member name="rendering/quality/shading/force_lambert_over_burley" type="bool" setter="" getter="" default="false"> - If [code]true[/code], uses faster but lower-quality Lambert material lighting model instead of Burley. + <member name="rendering/limits/spatial_indexer/update_iterations_per_frame" type="int" setter="" getter="" default="10"> </member> - <member name="rendering/quality/shading/force_lambert_over_burley.mobile" type="bool" setter="" getter="" default="true"> - Lower-end override for [member rendering/quality/shading/force_lambert_over_burley] on mobile devices, due to performance concerns or driver support. + <member name="rendering/limits/time/time_rollover_secs" type="float" setter="" getter="" default="3600"> </member> - <member name="rendering/quality/shading/force_vertex_shading" type="bool" setter="" getter="" default="false"> - If [code]true[/code], forces vertex shading for all rendering. This can increase performance a lot, but also reduces quality immensely. Can be used to optimize performance on low-end mobile devices. + <member name="rendering/mesh_lod/lod_change/threshold_pixels" type="float" setter="" getter="" default="1.0"> </member> - <member name="rendering/quality/shading/force_vertex_shading.mobile" type="bool" setter="" getter="" default="true"> - Lower-end override for [member rendering/quality/shading/force_vertex_shading] on mobile devices, due to performance concerns or driver support. + <member name="rendering/reflections/reflection_atlas/reflection_count" type="int" setter="" getter="" default="64"> + Number of cubemaps to store in the reflection atlas. The number of [ReflectionProbe]s in a scene will be limited by this amount. A higher number requires more VRAM. </member> - <member name="rendering/quality/shadow_atlas/quadrant_0_subdiv" type="int" setter="" getter="" default="1"> - Subdivision quadrant size for shadow mapping. See shadow mapping documentation. + <member name="rendering/reflections/reflection_atlas/reflection_size" type="int" setter="" getter="" default="256"> + Size of cubemap faces for [ReflectionProbe]s. A higher number requires more VRAM and may make reflection probe updating slower. </member> - <member name="rendering/quality/shadow_atlas/quadrant_1_subdiv" type="int" setter="" getter="" default="2"> - Subdivision quadrant size for shadow mapping. See shadow mapping documentation. + <member name="rendering/reflections/reflection_atlas/reflection_size.mobile" type="int" setter="" getter="" default="128"> + Lower-end override for [member rendering/reflections/reflection_atlas/reflection_size] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/shadow_atlas/quadrant_2_subdiv" type="int" setter="" getter="" default="3"> - Subdivision quadrant size for shadow mapping. See shadow mapping documentation. + <member name="rendering/reflections/sky_reflections/fast_filter_high_quality" type="bool" setter="" getter="" default="false"> + Use a higher quality variant of the fast filtering algorithm. Significantly slower than using default quality, but results in smoother reflections. Should only be used when the scene is especially detailed. </member> - <member name="rendering/quality/shadow_atlas/quadrant_3_subdiv" type="int" setter="" getter="" default="4"> - Subdivision quadrant size for shadow mapping. See shadow mapping documentation. + <member name="rendering/reflections/sky_reflections/ggx_samples" type="int" setter="" getter="" default="1024"> + Sets the number of samples to take when using importance sampling for [Sky]s and [ReflectionProbe]s. A higher value will result in smoother, higher quality reflections, but increases time to calculate radiance maps. In general, fewer samples are needed for simpler, low dynamic range environments while more samples are needed for HDR environments and environments with a high level of detail. </member> - <member name="rendering/quality/shadow_atlas/size" type="int" setter="" getter="" default="4096"> - Size for shadow atlas (used for OmniLights and SpotLights). See documentation. + <member name="rendering/reflections/sky_reflections/ggx_samples.mobile" type="int" setter="" getter="" default="128"> + Lower-end override for [member rendering/reflections/sky_reflections/ggx_samples] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/shadow_atlas/size.mobile" type="int" setter="" getter="" default="2048"> - Lower-end override for [member rendering/quality/shadow_atlas/size] on mobile devices, due to performance concerns or driver support. + <member name="rendering/reflections/sky_reflections/roughness_layers" type="int" setter="" getter="" default="8"> + Limits the number of layers to use in radiance maps when using importance sampling. A lower number will be slightly faster and take up less VRAM. </member> - <member name="rendering/quality/shadows/soft_shadow_quality" type="int" setter="" getter="" default="2"> - Quality setting for shadows cast by [OmniLight3D]s and [SpotLight3D]s. Higher quality settings use more samples when reading from shadow maps and are thus slower. Low quality settings may result in shadows looking grainy. + <member name="rendering/reflections/sky_reflections/texture_array_reflections" type="bool" setter="" getter="" default="true"> + If [code]true[/code], uses texture arrays instead of mipmaps for reflection probes and panorama backgrounds (sky). This reduces jitter noise and upscaling artifacts on reflections, but is significantly slower to compute and uses [member rendering/reflections/sky_reflections/roughness_layers] times more memory. </member> - <member name="rendering/quality/shadows/soft_shadow_quality.mobile" type="int" setter="" getter="" default="0"> - Lower-end override for [member rendering/quality/shadows/soft_shadow_quality] on mobile devices, due to performance concerns or driver support. + <member name="rendering/reflections/sky_reflections/texture_array_reflections.mobile" type="bool" setter="" getter="" default="false"> + Lower-end override for [member rendering/reflections/sky_reflections/texture_array_reflections] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/ssao/adaptive_target" type="float" setter="" getter="" default="0.5"> - Quality target to use when [member rendering/quality/ssao/quality] is set to [code]ULTRA[/code]. A value of [code]0.0[/code] provides a quality and speed similar to [code]MEDIUM[/code] while a value of [code]1.0[/code] provides much higher quality than any of the other settings at the cost of performance. + <member name="rendering/shading/overrides/force_blinn_over_ggx" type="bool" setter="" getter="" default="false"> + If [code]true[/code], uses faster but lower-quality Blinn model to generate blurred reflections instead of the GGX model. </member> - <member name="rendering/quality/ssao/blur_passes" type="int" setter="" getter="" default="2"> - Number of blur passes to use when computing screen-space ambient occlusion. A higher number will result in a smoother look, but will be slower to compute and will have less high-frequency detail. + <member name="rendering/shading/overrides/force_blinn_over_ggx.mobile" type="bool" setter="" getter="" default="true"> + Lower-end override for [member rendering/shading/overrides/force_blinn_over_ggx] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/ssao/fadeout_from" type="float" setter="" getter="" default="50.0"> - Distance at which the screen-space ambient occlusion effect starts to fade out. Use this hide ambient occlusion at great distances. + <member name="rendering/shading/overrides/force_lambert_over_burley" type="bool" setter="" getter="" default="false"> + If [code]true[/code], uses faster but lower-quality Lambert material lighting model instead of Burley. </member> - <member name="rendering/quality/ssao/fadeout_to" type="float" setter="" getter="" default="300.0"> - Distance at which the screen-space ambient occlusion is fully faded out. Use this hide ambient occlusion at great distances. + <member name="rendering/shading/overrides/force_lambert_over_burley.mobile" type="bool" setter="" getter="" default="true"> + Lower-end override for [member rendering/shading/overrides/force_lambert_over_burley] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/ssao/half_size" type="bool" setter="" getter="" default="false"> - If [code]true[/code], screen-space ambient occlusion will be rendered at half size and then upscaled before being added to the scene. This is significantly faster but may miss small details. + <member name="rendering/shading/overrides/force_vertex_shading" type="bool" setter="" getter="" default="false"> + If [code]true[/code], forces vertex shading for all rendering. This can increase performance a lot, but also reduces quality immensely. Can be used to optimize performance on low-end mobile devices. </member> - <member name="rendering/quality/ssao/half_size.mobile" type="bool" setter="" getter="" default="true"> - Lower-end override for [member rendering/quality/ssao/half_size] on mobile devices, due to performance concerns. + <member name="rendering/shading/overrides/force_vertex_shading.mobile" type="bool" setter="" getter="" default="true"> + Lower-end override for [member rendering/shading/overrides/force_vertex_shading] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/ssao/quality" type="int" setter="" getter="" default="2"> - Sets the quality of the screen-space ambient occlusion effect. Higher values take more samples and so will result in better quality, at the cost of performance. Setting to [code]ULTRA[/code] will use the [member rendering/quality/ssao/adaptive_target] setting. + <member name="rendering/shadows/directional_shadow/16_bits" type="bool" setter="" getter="" default="true"> </member> - <member name="rendering/quality/subsurface_scattering/subsurface_scattering_depth_scale" type="float" setter="" getter="" default="0.01"> - Scales the depth over which the subsurface scattering effect is applied. A high value may allow light to scatter into a part of the mesh or another mesh that is close in screen space but far in depth. + <member name="rendering/shadows/directional_shadow/size" type="int" setter="" getter="" default="4096"> + The directional shadow's size in pixels. Higher values will result in sharper shadows, at the cost of performance. The value will be rounded up to the nearest power of 2. </member> - <member name="rendering/quality/subsurface_scattering/subsurface_scattering_quality" type="int" setter="" getter="" default="1"> - Sets the quality of the subsurface scattering effect. Higher values are slower but look nicer. + <member name="rendering/shadows/directional_shadow/size.mobile" type="int" setter="" getter="" default="2048"> + Lower-end override for [member rendering/shadows/directional_shadow/size] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/subsurface_scattering/subsurface_scattering_scale" type="float" setter="" getter="" default="0.05"> - Scales the distance over which samples are taken for subsurface scattering effect. Changing this does not impact performance, but higher values will result in significant artifacts as the samples will become obviously spread out. A lower value results in a smaller spread of scattered light. + <member name="rendering/shadows/directional_shadow/soft_shadow_quality" type="int" setter="" getter="" default="2"> + Quality setting for shadows cast by [DirectionalLight3D]s. Higher quality settings use more samples when reading from shadow maps and are thus slower. Low quality settings may result in shadows looking grainy. </member> - <member name="rendering/quality/texture_filters/anisotropic_filtering_level" type="int" setter="" getter="" default="2"> - Sets the maximum number of samples to take when using anisotropic filtering on textures (as a power of two). A higher sample count will result in sharper textures at oblique angles, but is more expensive to compute. A value of [code]0[/code] forcibly disables anisotropic filtering, even on materials where it is enabled. + <member name="rendering/shadows/directional_shadow/soft_shadow_quality.mobile" type="int" setter="" getter="" default="0"> + Lower-end override for [member rendering/shadows/directional_shadow/soft_shadow_quality] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/quality/texture_filters/use_nearest_mipmap_filter" type="bool" setter="" getter="" default="false"> - If [code]true[/code], uses nearest-neighbor mipmap filtering when using mipmaps (also called "bilinear filtering"), which will result in visible seams appearing between mipmap stages. This may increase performance in mobile as less memory bandwidth is used. If [code]false[/code], linear mipmap filtering (also called "trilinear filtering") is used. + <member name="rendering/shadows/shadow_atlas/16_bits" type="bool" setter="" getter="" default="true"> </member> - <member name="rendering/sdfgi/frames_to_converge" type="int" setter="" getter="" default="1"> + <member name="rendering/shadows/shadow_atlas/quadrant_0_subdiv" type="int" setter="" getter="" default="2"> + Subdivision quadrant size for shadow mapping. See shadow mapping documentation. </member> - <member name="rendering/sdfgi/probe_ray_count" type="int" setter="" getter="" default="2"> + <member name="rendering/shadows/shadow_atlas/quadrant_1_subdiv" type="int" setter="" getter="" default="2"> + Subdivision quadrant size for shadow mapping. See shadow mapping documentation. </member> - <member name="rendering/spatial_indexer/threaded_cull_minimum_instances" type="int" setter="" getter="" default="1000"> + <member name="rendering/shadows/shadow_atlas/quadrant_2_subdiv" type="int" setter="" getter="" default="3"> + Subdivision quadrant size for shadow mapping. See shadow mapping documentation. </member> - <member name="rendering/spatial_indexer/update_iterations_per_frame" type="int" setter="" getter="" default="10"> + <member name="rendering/shadows/shadow_atlas/quadrant_3_subdiv" type="int" setter="" getter="" default="4"> + Subdivision quadrant size for shadow mapping. See shadow mapping documentation. </member> - <member name="rendering/threads/thread_model" type="int" setter="" getter="" default="1"> - Thread model for rendering. Rendering on a thread can vastly improve performance, but synchronizing to the main thread can cause a bit more jitter. + <member name="rendering/shadows/shadow_atlas/size" type="int" setter="" getter="" default="4096"> + Size for shadow atlas (used for OmniLights and SpotLights). See documentation. </member> - <member name="rendering/volumetric_fog/directional_shadow_shrink" type="int" setter="" getter="" default="512"> + <member name="rendering/shadows/shadow_atlas/size.mobile" type="int" setter="" getter="" default="2048"> + Lower-end override for [member rendering/shadows/shadow_atlas/size] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/volumetric_fog/positional_shadow_shrink" type="int" setter="" getter="" default="512"> + <member name="rendering/shadows/shadows/soft_shadow_quality" type="int" setter="" getter="" default="2"> + Quality setting for shadows cast by [OmniLight3D]s and [SpotLight3D]s. Higher quality settings use more samples when reading from shadow maps and are thus slower. Low quality settings may result in shadows looking grainy. </member> - <member name="rendering/volumetric_fog/use_filter" type="int" setter="" getter="" default="0"> + <member name="rendering/shadows/shadows/soft_shadow_quality.mobile" type="int" setter="" getter="" default="0"> + Lower-end override for [member rendering/shadows/shadows/soft_shadow_quality] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/volumetric_fog/volume_depth" type="int" setter="" getter="" default="128"> + <member name="rendering/textures/default_filters/anisotropic_filtering_level" type="int" setter="" getter="" default="2"> + Sets the maximum number of samples to take when using anisotropic filtering on textures (as a power of two). A higher sample count will result in sharper textures at oblique angles, but is more expensive to compute. A value of [code]0[/code] forcibly disables anisotropic filtering, even on materials where it is enabled. </member> - <member name="rendering/volumetric_fog/volume_size" type="int" setter="" getter="" default="64"> + <member name="rendering/textures/default_filters/use_nearest_mipmap_filter" type="bool" setter="" getter="" default="false"> + If [code]true[/code], uses nearest-neighbor mipmap filtering when using mipmaps (also called "bilinear filtering"), which will result in visible seams appearing between mipmap stages. This may increase performance in mobile as less memory bandwidth is used. If [code]false[/code], linear mipmap filtering (also called "trilinear filtering") is used. </member> - <member name="rendering/vram_compression/import_bptc" type="bool" setter="" getter="" default="false"> + <member name="rendering/textures/vram_compression/import_bptc" type="bool" setter="" getter="" default="false"> If [code]true[/code], the texture importer will import VRAM-compressed textures using the BPTC algorithm. This texture compression algorithm is only supported on desktop platforms, and only when using the Vulkan renderer. </member> - <member name="rendering/vram_compression/import_etc" type="bool" setter="" getter="" default="false"> + <member name="rendering/textures/vram_compression/import_etc" type="bool" setter="" getter="" default="false"> If [code]true[/code], the texture importer will import VRAM-compressed textures using the Ericsson Texture Compression algorithm. This algorithm doesn't support alpha channels in textures. </member> - <member name="rendering/vram_compression/import_etc2" type="bool" setter="" getter="" default="true"> + <member name="rendering/textures/vram_compression/import_etc2" type="bool" setter="" getter="" default="true"> If [code]true[/code], the texture importer will import VRAM-compressed textures using the Ericsson Texture Compression 2 algorithm. This texture compression algorithm is only supported when using the Vulkan renderer. </member> - <member name="rendering/vram_compression/import_pvrtc" type="bool" setter="" getter="" default="false"> + <member name="rendering/textures/vram_compression/import_pvrtc" type="bool" setter="" getter="" default="false"> If [code]true[/code], the texture importer will import VRAM-compressed textures using the PowerVR Texture Compression algorithm. This texture compression algorithm is only supported on iOS. </member> - <member name="rendering/vram_compression/import_s3tc" type="bool" setter="" getter="" default="true"> + <member name="rendering/textures/vram_compression/import_s3tc" type="bool" setter="" getter="" default="true"> If [code]true[/code], the texture importer will import VRAM-compressed textures using the S3 Texture Compression algorithm. This algorithm is only supported on desktop platforms and consoles. </member> <member name="rendering/vulkan/descriptor_pools/max_descriptors_per_pool" type="int" setter="" getter="" default="64"> diff --git a/doc/classes/Quat.xml b/doc/classes/Quat.xml index ef83ae7fb9..1c0a3e37c0 100644 --- a/doc/classes/Quat.xml +++ b/doc/classes/Quat.xml @@ -83,7 +83,7 @@ Constructs a quaternion defined by the given values. </description> </method> - <method name="cubic_slerp"> + <method name="cubic_slerp" qualifiers="const"> <return type="Quat"> </return> <argument index="0" name="b" type="Quat"> @@ -98,7 +98,7 @@ Performs a cubic spherical interpolation between quaternions [code]pre_a[/code], this vector, [code]b[/code], and [code]post_b[/code], by the given amount [code]weight[/code]. </description> </method> - <method name="dot"> + <method name="dot" qualifiers="const"> <return type="float"> </return> <argument index="0" name="with" type="Quat"> @@ -107,51 +107,51 @@ Returns the dot product of two quaternions. </description> </method> - <method name="get_euler"> + <method name="get_euler" qualifiers="const"> <return type="Vector3"> </return> <description> Returns Euler angles (in the YXZ convention: when decomposing, first Z, then X, and Y last) corresponding to the rotation represented by the unit quaternion. Returned vector contains the rotation angles in the format (X angle, Y angle, Z angle). </description> </method> - <method name="inverse"> + <method name="inverse" qualifiers="const"> <return type="Quat"> </return> <description> Returns the inverse of the quaternion. </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="to" type="Quat"> </argument> <description> - Returns [code]true[/code] if this quaterion and [code]quat[/code] are approximately equal, by running [method @GlobalScope.is_equal_approx] on each component. + Returns [code]true[/code] if this quaternion and [code]quat[/code] are approximately equal, by running [method @GlobalScope.is_equal_approx] on each component. </description> </method> - <method name="is_normalized"> + <method name="is_normalized" qualifiers="const"> <return type="bool"> </return> <description> Returns whether the quaternion is normalized or not. </description> </method> - <method name="length"> + <method name="length" qualifiers="const"> <return type="float"> </return> <description> Returns the length of the quaternion. </description> </method> - <method name="length_squared"> + <method name="length_squared" qualifiers="const"> <return type="float"> </return> <description> Returns the length of the quaternion, squared. </description> </method> - <method name="normalized"> + <method name="normalized" qualifiers="const"> <return type="Quat"> </return> <description> @@ -258,7 +258,7 @@ <description> </description> </method> - <method name="slerp"> + <method name="slerp" qualifiers="const"> <return type="Quat"> </return> <argument index="0" name="to" type="Quat"> @@ -270,7 +270,7 @@ [b]Note:[/b] Both quaternions must be normalized. </description> </method> - <method name="slerpni"> + <method name="slerpni" qualifiers="const"> <return type="Quat"> </return> <argument index="0" name="to" type="Quat"> diff --git a/doc/classes/RID.xml b/doc/classes/RID.xml index 0ee34d4194..e686a4b8fd 100644 --- a/doc/classes/RID.xml +++ b/doc/classes/RID.xml @@ -25,7 +25,7 @@ Constructs a [RID] as a copy of the given [RID]. </description> </method> - <method name="get_id"> + <method name="get_id" qualifiers="const"> <return type="int"> </return> <description> diff --git a/doc/classes/RayCast3D.xml b/doc/classes/RayCast3D.xml index d24e86a08b..443890438f 100644 --- a/doc/classes/RayCast3D.xml +++ b/doc/classes/RayCast3D.xml @@ -136,6 +136,13 @@ <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1"> The ray's collision mask. Only objects in at least one collision layer enabled in the mask will be detected. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> + <member name="debug_shape_custom_color" type="Color" setter="set_debug_shape_custom_color" getter="get_debug_shape_custom_color" default="Color( 0, 0, 0, 1 )"> + The custom color to use to draw the shape in the editor and at run-time if [b]Visible Collision Shapes[/b] is enabled in the [b]Debug[/b] menu. This color will be highlighted at run-time if the [RayCast3D] is colliding with something. + If set to [code]Color(0.0, 0.0, 0.0)[/code] (by default), the color set in [member ProjectSettings.debug/shapes/collision/shape_color] is used. + </member> + <member name="debug_shape_thickness" type="float" setter="set_debug_shape_thickness" getter="get_debug_shape_thickness" default="2.0"> + If set to [code]1[/code], a line is used as the debug shape. Otherwise, a truncated pyramid is drawn to represent the [RayCast3D]. Requires [b]Visible Collision Shapes[/b] to be enabled in the [b]Debug[/b] menu for the debug shape to be visible at run-time. + </member> <member name="enabled" type="bool" setter="set_enabled" getter="is_enabled" default="true"> If [code]true[/code], collisions will be reported. </member> diff --git a/doc/classes/Rect2.xml b/doc/classes/Rect2.xml index 5d7ff39587..352a18e326 100644 --- a/doc/classes/Rect2.xml +++ b/doc/classes/Rect2.xml @@ -65,14 +65,14 @@ Constructs a [Rect2] by x, y, width, and height. </description> </method> - <method name="abs"> + <method name="abs" qualifiers="const"> <return type="Rect2"> </return> <description> Returns a [Rect2] with equivalent position and area, modified so that the top-left corner is the origin and [code]width[/code] and [code]height[/code] are positive. </description> </method> - <method name="encloses"> + <method name="encloses" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="b" type="Rect2"> @@ -81,7 +81,7 @@ Returns [code]true[/code] if this [Rect2] completely encloses another one. </description> </method> - <method name="expand"> + <method name="expand" qualifiers="const"> <return type="Rect2"> </return> <argument index="0" name="to" type="Vector2"> @@ -90,14 +90,14 @@ Returns this [Rect2] expanded to include a given point. </description> </method> - <method name="get_area"> + <method name="get_area" qualifiers="const"> <return type="float"> </return> <description> Returns the area of the [Rect2]. </description> </method> - <method name="grow"> + <method name="grow" qualifiers="const"> <return type="Rect2"> </return> <argument index="0" name="amount" type="float"> @@ -106,7 +106,7 @@ Returns a copy of the [Rect2] grown by the specified [code]amount[/code] on all sides. </description> </method> - <method name="grow_individual"> + <method name="grow_individual" qualifiers="const"> <return type="Rect2"> </return> <argument index="0" name="left" type="float"> @@ -121,7 +121,7 @@ Returns a copy of the [Rect2] grown by the specified amount on each side individually. </description> </method> - <method name="grow_side"> + <method name="grow_side" qualifiers="const"> <return type="Rect2"> </return> <argument index="0" name="side" type="int"> @@ -132,14 +132,14 @@ Returns a copy of the [Rect2] grown by the specified [code]amount[/code] on the specified [enum Side]. </description> </method> - <method name="has_no_area"> + <method name="has_no_area" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the [Rect2] is flat or empty. </description> </method> - <method name="has_point"> + <method name="has_point" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="point" type="Vector2"> @@ -148,7 +148,7 @@ Returns [code]true[/code] if the [Rect2] contains a point. </description> </method> - <method name="intersection"> + <method name="intersection" qualifiers="const"> <return type="Rect2"> </return> <argument index="0" name="b" type="Rect2"> @@ -158,7 +158,7 @@ If the rectangles do not intersect, an empty [Rect2] is returned. </description> </method> - <method name="intersects"> + <method name="intersects" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="b" type="Rect2"> @@ -170,7 +170,7 @@ If [code]include_borders[/code] is [code]true[/code], they will also be considered overlapping if their borders touch, even without intersection. </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="rect" type="Rect2"> @@ -179,7 +179,7 @@ Returns [code]true[/code] if this [Rect2] and [code]rect[/code] are approximately equal, by calling [code]is_equal_approx[/code] on each component. </description> </method> - <method name="merge"> + <method name="merge" qualifiers="const"> <return type="Rect2"> </return> <argument index="0" name="b" type="Rect2"> @@ -221,7 +221,7 @@ Beginning corner. Typically has values lower than [member end]. </member> <member name="size" type="Vector2" setter="" getter="" default="Vector2( 0, 0 )"> - Size from [member position] to [member end]. Typically all components are positive. + Size from [member position] to [member end]. Typically, all components are positive. If the size is negative, you can use [method abs] to fix it. </member> </members> diff --git a/doc/classes/Rect2i.xml b/doc/classes/Rect2i.xml index e581ccdb11..84bef9b406 100644 --- a/doc/classes/Rect2i.xml +++ b/doc/classes/Rect2i.xml @@ -63,14 +63,14 @@ Constructs a [Rect2i] by x, y, width, and height. </description> </method> - <method name="abs"> + <method name="abs" qualifiers="const"> <return type="Rect2i"> </return> <description> Returns a [Rect2i] with equivalent position and area, modified so that the top-left corner is the origin and [code]width[/code] and [code]height[/code] are positive. </description> </method> - <method name="encloses"> + <method name="encloses" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="b" type="Rect2i"> @@ -79,7 +79,7 @@ Returns [code]true[/code] if this [Rect2i] completely encloses another one. </description> </method> - <method name="expand"> + <method name="expand" qualifiers="const"> <return type="Rect2i"> </return> <argument index="0" name="to" type="Vector2i"> @@ -88,14 +88,14 @@ Returns this [Rect2i] expanded to include a given point. </description> </method> - <method name="get_area"> + <method name="get_area" qualifiers="const"> <return type="int"> </return> <description> Returns the area of the [Rect2i]. </description> </method> - <method name="grow"> + <method name="grow" qualifiers="const"> <return type="Rect2i"> </return> <argument index="0" name="amount" type="int"> @@ -104,7 +104,7 @@ Returns a copy of the [Rect2i] grown by the specified [code]amount[/code] on all sides. </description> </method> - <method name="grow_individual"> + <method name="grow_individual" qualifiers="const"> <return type="Rect2i"> </return> <argument index="0" name="left" type="int"> @@ -119,7 +119,7 @@ Returns a copy of the [Rect2i] grown by the specified amount on each side individually. </description> </method> - <method name="grow_side"> + <method name="grow_side" qualifiers="const"> <return type="Rect2i"> </return> <argument index="0" name="side" type="int"> @@ -130,14 +130,14 @@ Returns a copy of the [Rect2i] grown by the specified [code]amount[/code] on the specified [enum Side]. </description> </method> - <method name="has_no_area"> + <method name="has_no_area" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the [Rect2i] is flat or empty. </description> </method> - <method name="has_point"> + <method name="has_point" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="point" type="Vector2i"> @@ -146,7 +146,7 @@ Returns [code]true[/code] if the [Rect2i] contains a point. </description> </method> - <method name="intersection"> + <method name="intersection" qualifiers="const"> <return type="Rect2i"> </return> <argument index="0" name="b" type="Rect2i"> @@ -156,7 +156,7 @@ If the rectangles do not intersect, an empty [Rect2i] is returned. </description> </method> - <method name="intersects"> + <method name="intersects" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="b" type="Rect2i"> @@ -166,7 +166,7 @@ If [code]include_borders[/code] is [code]true[/code], they will also be considered overlapping if their borders touch, even without intersection. </description> </method> - <method name="merge"> + <method name="merge" qualifiers="const"> <return type="Rect2i"> </return> <argument index="0" name="b" type="Rect2i"> @@ -200,7 +200,7 @@ Beginning corner. Typically has values lower than [member end]. </member> <member name="size" type="Vector2i" setter="" getter="" default="Vector2i( 0, 0 )"> - Size from [member position] to [member end]. Typically all components are positive. + Size from [member position] to [member end]. Typically, all components are positive. If the size is negative, you can use [method abs] to fix it. </member> </members> diff --git a/doc/classes/RenderingDevice.xml b/doc/classes/RenderingDevice.xml index 7cdc9ffaca..841d2bde72 100644 --- a/doc/classes/RenderingDevice.xml +++ b/doc/classes/RenderingDevice.xml @@ -7,6 +7,30 @@ <tutorials> </tutorials> <methods> + <method name="barrier"> + <return type="void"> + </return> + <argument index="0" name="from" type="int" default="7"> + </argument> + <argument index="1" name="to" type="int" default="7"> + </argument> + <description> + </description> + </method> + <method name="buffer_clear"> + <return type="int" enum="Error"> + </return> + <argument index="0" name="buffer" type="RID"> + </argument> + <argument index="1" name="offset" type="int"> + </argument> + <argument index="2" name="size_bytes" type="int"> + </argument> + <argument index="3" name="post_barrier" type="int" default="7"> + </argument> + <description> + </description> + </method> <method name="buffer_get_data"> <return type="PackedByteArray"> </return> @@ -26,7 +50,7 @@ </argument> <argument index="3" name="data" type="PackedByteArray"> </argument> - <argument index="4" name="sync_with_draw" type="bool" default="true"> + <argument index="4" name="post_barrier" type="int" default="7"> </argument> <description> </description> @@ -36,8 +60,6 @@ </return> <argument index="0" name="name" type="String"> </argument> - <argument index="1" name="sync_to_draw" type="bool"> - </argument> <description> </description> </method> @@ -52,6 +74,8 @@ <method name="compute_list_begin"> <return type="int"> </return> + <argument index="0" name="allow_draw_overlap" type="bool" default="false"> + </argument> <description> </description> </method> @@ -94,6 +118,8 @@ <method name="compute_list_end"> <return type="void"> </return> + <argument index="0" name="post_barrier" type="int" default="7"> + </argument> <description> </description> </method> @@ -131,6 +157,32 @@ <description> </description> </method> + <method name="draw_command_begin_label"> + <return type="void"> + </return> + <argument index="0" name="name" type="String"> + </argument> + <argument index="1" name="color" type="Color"> + </argument> + <description> + </description> + </method> + <method name="draw_command_end_label"> + <return type="void"> + </return> + <description> + </description> + </method> + <method name="draw_command_insert_label"> + <return type="void"> + </return> + <argument index="0" name="name" type="String"> + </argument> + <argument index="1" name="color" type="Color"> + </argument> + <description> + </description> + </method> <method name="draw_list_begin"> <return type="int"> </return> @@ -272,6 +324,8 @@ <method name="draw_list_end"> <return type="void"> </return> + <argument index="0" name="post_barrier" type="int" default="7"> + </argument> <description> </description> </method> @@ -302,7 +356,9 @@ </return> <argument index="0" name="size" type="Vector2i"> </argument> - <argument index="1" name="validate_with_format" type="int" default="-1"> + <argument index="1" name="samples" type="int" enum="RenderingDevice.TextureSamples" default="0"> + </argument> + <argument index="2" name="validate_with_format" type="int" default="-1"> </argument> <description> </description> @@ -318,7 +374,7 @@ <method name="framebuffer_format_create_empty"> <return type="int"> </return> - <argument index="0" name="size" type="Vector2i"> + <argument index="0" name="samples" type="int" enum="RenderingDevice.TextureSamples" default="0"> </argument> <description> </description> @@ -347,6 +403,12 @@ <description> </description> </method> + <method name="full_barrier"> + <return type="void"> + </return> + <description> + </description> + </method> <method name="get_captured_timestamp_cpu_time" qualifiers="const"> <return type="int"> </return> @@ -383,6 +445,24 @@ <description> </description> </method> + <method name="get_device_name" qualifiers="const"> + <return type="String"> + </return> + <description> + </description> + </method> + <method name="get_device_pipeline_cache_uuid" qualifiers="const"> + <return type="String"> + </return> + <description> + </description> + </method> + <method name="get_device_vendor_name" qualifiers="const"> + <return type="String"> + </return> + <description> + </description> + </method> <method name="get_frame_delay" qualifiers="const"> <return type="int"> </return> @@ -410,7 +490,7 @@ </argument> <argument index="2" name="data" type="PackedByteArray" default="PackedByteArray( )"> </argument> - <argument index="3" name="arg3" type="bool" default="false"> + <argument index="3" name="use_restart_indices" type="bool" default="false"> </argument> <description> </description> @@ -485,6 +565,16 @@ <description> </description> </method> + <method name="set_resource_name"> + <return type="void"> + </return> + <argument index="0" name="id" type="RID"> + </argument> + <argument index="1" name="name" type="String"> + </argument> + <description> + </description> + </method> <method name="shader_compile_from_source"> <return type="RDShaderBytecode"> </return> @@ -562,7 +652,7 @@ </argument> <argument index="5" name="layer_count" type="int"> </argument> - <argument index="6" name="sync_with_draw" type="bool" default="false"> + <argument index="6" name="post_barrier" type="int" default="7"> </argument> <description> </description> @@ -588,7 +678,7 @@ </argument> <argument index="8" name="dst_layer" type="int"> </argument> - <argument index="9" name="sync_with_draw" type="bool" default="false"> + <argument index="9" name="post_barrier" type="int" default="7"> </argument> <description> </description> @@ -674,7 +764,7 @@ </argument> <argument index="1" name="to_texture" type="RID"> </argument> - <argument index="2" name="sync_with_draw" type="bool" default="false"> + <argument index="2" name="post_barrier" type="int" default="7"> </argument> <description> </description> @@ -688,7 +778,7 @@ </argument> <argument index="2" name="data" type="PackedByteArray"> </argument> - <argument index="3" name="sync_with_draw" type="bool" default="false"> + <argument index="3" name="post_barrier" type="int" default="7"> </argument> <description> </description> @@ -745,6 +835,16 @@ </method> </methods> <constants> + <constant name="BARRIER_MASK_RASTER" value="1"> + </constant> + <constant name="BARRIER_MASK_COMPUTE" value="2"> + </constant> + <constant name="BARRIER_MASK_TRANSFER" value="4"> + </constant> + <constant name="BARRIER_MASK_ALL" value="7"> + </constant> + <constant name="BARRIER_MASK_NO_BARRIER" value="8"> + </constant> <constant name="DATA_FORMAT_R4G4_UNORM_PACK8" value="0" enum="DataFormat"> </constant> <constant name="DATA_FORMAT_R4G4B4A4_UNORM_PACK16" value="1" enum="DataFormat"> @@ -1507,13 +1607,17 @@ </constant> <constant name="INITIAL_ACTION_CLEAR" value="0" enum="InitialAction"> </constant> - <constant name="INITIAL_ACTION_KEEP" value="1" enum="InitialAction"> + <constant name="INITIAL_ACTION_CLEAR_REGION" value="1" enum="InitialAction"> + </constant> + <constant name="INITIAL_ACTION_CLEAR_REGION_CONTINUE" value="2" enum="InitialAction"> + </constant> + <constant name="INITIAL_ACTION_KEEP" value="3" enum="InitialAction"> </constant> - <constant name="INITIAL_ACTION_DROP" value="2" enum="InitialAction"> + <constant name="INITIAL_ACTION_DROP" value="4" enum="InitialAction"> </constant> - <constant name="INITIAL_ACTION_CONTINUE" value="3" enum="InitialAction"> + <constant name="INITIAL_ACTION_CONTINUE" value="5" enum="InitialAction"> </constant> - <constant name="INITIAL_ACTION_MAX" value="4" enum="InitialAction"> + <constant name="INITIAL_ACTION_MAX" value="6" enum="InitialAction"> </constant> <constant name="FINAL_ACTION_READ" value="0" enum="FinalAction"> </constant> diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml index 4be97b7d3d..f82301bcf4 100644 --- a/doc/classes/RenderingServer.xml +++ b/doc/classes/RenderingServer.xml @@ -10,7 +10,7 @@ Resources are created using the [code]*_create[/code] functions. All objects are drawn to a viewport. You can use the [Viewport] attached to the [SceneTree] or you can create one yourself with [method viewport_create]. When using a custom scenario or canvas, the scenario or canvas needs to be attached to the viewport using [method viewport_set_scenario] or [method viewport_attach_canvas]. In 3D, all visual objects must be associated with a scenario. The scenario is a visual representation of the world. If accessing the rendering server from a running game, the scenario can be accessed from the scene tree from any [Node3D] node with [method Node3D.get_world_3d]. Otherwise, a scenario can be created with [method scenario_create]. - Similarly in 2D, a canvas is needed to draw all canvas items. + Similarly, in 2D, a canvas is needed to draw all canvas items. In 3D, all visible objects are comprised of a resource and an instance. A resource can be a mesh, a particle system, a light, or any other 3D object. In order to be visible resources must be attached to an instance using [method instance_set_base]. The instance must also be attached to the scenario using [method instance_set_scenario] in order to be visible. In 2D, all visible objects are some form of canvas item. In order to be visible, a canvas item needs to be the child of a canvas attached to a viewport, or it needs to be the child of another canvas item that is eventually attached to the canvas. </description> @@ -1292,7 +1292,7 @@ <argument index="1" name="margin" type="float"> </argument> <description> - Sets a margin to increase the size of the AABB when culling objects from the view frustum. This allows you avoid culling objects that fall outside the view frustum. Equivalent to [member GeometryInstance3D.extra_cull_margin]. + Sets a margin to increase the size of the AABB when culling objects from the view frustum. This allows you to avoid culling objects that fall outside the view frustum. Equivalent to [member GeometryInstance3D.extra_cull_margin]. </description> </method> <method name="instance_set_layer_mask"> @@ -1520,7 +1520,7 @@ <argument index="1" name="enabled" type="bool"> </argument> <description> - If [code]true[/code], reverses the backface culling of the mesh. This can be useful when you have a flat mesh that has a light behind it. If you need to cast a shadow on both sides of the mesh, set the mesh to use double sided shadows with [method instance_geometry_set_cast_shadows_setting]. Equivalent to [member Light3D.shadow_reverse_cull_face]. + If [code]true[/code], reverses the backface culling of the mesh. This can be useful when you have a flat mesh that has a light behind it. If you need to cast a shadow on both sides of the mesh, set the mesh to use double-sided shadows with [method instance_geometry_set_cast_shadows_setting]. Equivalent to [member Light3D.shadow_reverse_cull_face]. </description> </method> <method name="light_set_shadow"> @@ -1802,7 +1802,7 @@ Updates a specific region of a vertex buffer for the specified surface. Warning: this function alters the vertex buffer directly with no safety mechanisms, you can easily corrupt your mesh. </description> </method> - <method name="multimesh_allocate"> + <method name="multimesh_allocate_data"> <return type="void"> </return> <argument index="0" name="multimesh" type="RID"> @@ -2204,7 +2204,7 @@ <argument index="1" name="time" type="float"> </argument> <description> - Sets the preprocess time for the particles animation. This lets you delay starting an animation until after the particles have begun emitting. Equivalent to [member GPUParticles3D.preprocess]. + Sets the preprocess time for the particles' animation. This lets you delay starting an animation until after the particles have begun emitting. Equivalent to [member GPUParticles3D.preprocess]. </description> </method> <method name="particles_set_process_material"> @@ -2549,7 +2549,7 @@ Sets a shader's default texture. Overwrites the texture given by name. </description> </method> - <method name="skeleton_allocate"> + <method name="skeleton_allocate_data"> <return type="void"> </return> <argument index="0" name="skeleton" type="RID"> @@ -2559,7 +2559,6 @@ <argument index="2" name="is_2d_skeleton" type="bool" default="false"> </argument> <description> - Allocates the GPU buffers for this skeleton. </description> </method> <method name="skeleton_bone_get_transform" qualifiers="const"> @@ -2705,11 +2704,14 @@ <description> Copies the viewport to a region of the screen specified by [code]rect[/code]. If [method viewport_set_render_direct_to_screen] is [code]true[/code], then the viewport does not use a framebuffer and the contents of the viewport are rendered directly to screen. However, note that the root viewport is drawn last, therefore it will draw over the screen. Accordingly, you must set the root viewport to an area that does not cover the area that you have attached this viewport to. For example, you can set the root viewport to not render at all with the following code: - [codeblock] + FIXME: The method seems to be non-existent. + [codeblocks] + [gdscript] func _ready(): get_viewport().set_attach_to_screen_rect(Rect2()) $Viewport.set_attach_to_screen_rect(Rect2(0, 0, 600, 600)) - [/codeblock] + [/gdscript] + [/codeblocks] Using this can result in significant optimization, especially on lower-end devices. However, it comes at the cost of having to manage your viewports manually. For a further optimization see, [method viewport_set_render_direct_to_screen]. </description> </method> @@ -2949,6 +2951,8 @@ </argument> <argument index="1" name="size" type="int"> </argument> + <argument index="2" name="use_16_bits" type="bool" default="false"> + </argument> <description> Sets the size of the shadow atlas's images (used for omni and spot lights). The value will be rounded up to the nearest power of 2. </description> @@ -3451,7 +3455,7 @@ <constant name="VIEWPORT_DEBUG_DRAW_GI_BUFFER" value="17" enum="ViewportDebugDraw"> </constant> <constant name="SKY_MODE_QUALITY" value="1" enum="SkyMode"> - Uses high quality importance sampling to process the radiance map. In general, this results in much higher quality than [constant Sky.PROCESS_MODE_REALTIME] but takes much longer to generate. This should not be used if you plan on changing the sky at runtime. If you are finding that the reflection is not blurry enough and is showing sparkles or fireflies, try increasing [member ProjectSettings.rendering/quality/reflections/ggx_samples]. + Uses high quality importance sampling to process the radiance map. In general, this results in much higher quality than [constant Sky.PROCESS_MODE_REALTIME] but takes much longer to generate. This should not be used if you plan on changing the sky at runtime. If you are finding that the reflection is not blurry enough and is showing sparkles or fireflies, try increasing [member ProjectSettings.rendering/reflections/sky_reflections/ggx_samples]. </constant> <constant name="SKY_MODE_REALTIME" value="3" enum="SkyMode"> Uses the fast filtering algorithm to process the radiance map. In general this results in lower quality, but substantially faster run times. diff --git a/doc/classes/ResourceFormatLoader.xml b/doc/classes/ResourceFormatLoader.xml index ad0c438f98..9943f644cf 100644 --- a/doc/classes/ResourceFormatLoader.xml +++ b/doc/classes/ResourceFormatLoader.xml @@ -6,7 +6,7 @@ <description> Godot loads resources in the editor or in exported games using ResourceFormatLoaders. They are queried automatically via the [ResourceLoader] singleton, or when a resource with internal dependencies is loaded. Each file type may load as a different resource type, so multiple ResourceFormatLoaders are registered in the engine. Extending this class allows you to define your own loader. Be sure to respect the documented return types and values. You should give it a global class name with [code]class_name[/code] for it to be registered. Like built-in ResourceFormatLoaders, it will be called automatically when loading resources of its handled type(s). You may also implement a [ResourceFormatSaver]. - [b]Note:[/b] You can also extend [EditorImportPlugin] if the resource type you need exists but Godot is unable to load its format. Choosing one way over another depends if the format is suitable or not for the final exported game. For example, it's better to import [code].png[/code] textures as [code].stex[/code] ([StreamTexture2D]) first, so they can be loaded with better efficiency on the graphics card. + [b]Note:[/b] You can also extend [EditorImportPlugin] if the resource type you need exists but Godot is unable to load its format. Choosing one way over another depends on if the format is suitable or not for the final exported game. For example, it's better to import [code].png[/code] textures as [code].stex[/code] ([StreamTexture2D]) first, so they can be loaded with better efficiency on the graphics card. </description> <tutorials> </tutorials> @@ -57,8 +57,13 @@ </argument> <argument index="1" name="original_path" type="String"> </argument> + <argument index="2" name="use_sub_threads" type="bool"> + </argument> + <argument index="3" name="cache_mode" type="int"> + </argument> <description> Loads a resource when the engine finds this loader to be compatible. If the loaded resource is the result of an import, [code]original_path[/code] will target the source file. Returns a [Resource] object on success, or an [enum Error] constant in case of failure. + The [code]cache_mode[/code] property defines whether and how the cache should be used or updated when loading the resource. See [enum CacheMode] for details. </description> </method> <method name="rename_dependencies" qualifiers="virtual"> @@ -75,5 +80,11 @@ </method> </methods> <constants> + <constant name="CACHE_MODE_IGNORE" value="0" enum="CacheMode"> + </constant> + <constant name="CACHE_MODE_REUSE" value="1" enum="CacheMode"> + </constant> + <constant name="CACHE_MODE_REPLACE" value="2" enum="CacheMode"> + </constant> </constants> </class> diff --git a/doc/classes/ResourceLoader.xml b/doc/classes/ResourceLoader.xml index c55a51c7ae..c81b21333f 100644 --- a/doc/classes/ResourceLoader.xml +++ b/doc/classes/ResourceLoader.xml @@ -58,13 +58,13 @@ </argument> <argument index="1" name="type_hint" type="String" default=""""> </argument> - <argument index="2" name="no_cache" type="bool" default="false"> + <argument index="2" name="cache_mode" type="int" enum="ResourceLoader.CacheMode" default="1"> </argument> <description> Loads a resource at the given [code]path[/code], caching the result for further access. The registered [ResourceFormatLoader]s are queried sequentially to find the first one which can handle the file's extension, and then attempt loading. If loading fails, the remaining ResourceFormatLoaders are also attempted. An optional [code]type_hint[/code] can be used to further specify the [Resource] type that should be handled by the [ResourceFormatLoader]. Anything that inherits from [Resource] can be used as a type hint, for example [Image]. - If [code]no_cache[/code] is [code]true[/code], the resource cache will be bypassed and the resource will be loaded anew. Otherwise, the cached resource will be returned if it exists. + The [code]cache_mode[/code] property defines whether and how the cache should be used or updated when loading the resource. See [enum CacheMode] for details. Returns an empty resource if no [ResourceFormatLoader] could handle the file. GDScript has a simplified [method @GDScript.load] built-in method which can be used in most situations, leaving the use of [ResourceLoader] for more advanced scenarios. </description> @@ -127,5 +127,11 @@ <constant name="THREAD_LOAD_LOADED" value="3" enum="ThreadLoadStatus"> The resource was loaded successfully and can be accessed via [method load_threaded_get]. </constant> + <constant name="CACHE_MODE_IGNORE" value="0" enum="CacheMode"> + </constant> + <constant name="CACHE_MODE_REUSE" value="1" enum="CacheMode"> + </constant> + <constant name="CACHE_MODE_REPLACE" value="2" enum="CacheMode"> + </constant> </constants> </class> diff --git a/doc/classes/RichTextEffect.xml b/doc/classes/RichTextEffect.xml index 726b26fbc7..edab35f162 100644 --- a/doc/classes/RichTextEffect.xml +++ b/doc/classes/RichTextEffect.xml @@ -6,10 +6,16 @@ <description> A custom effect for use with [RichTextLabel]. [b]Note:[/b] For a [RichTextEffect] to be usable, a BBCode tag must be defined as a member variable called [code]bbcode[/code] in the script. - [codeblock] + [codeblocks] + [gdscript] # The RichTextEffect will be usable like this: `[example]Some text[/example]` var bbcode = "example" - [/codeblock] + [/gdscript] + [csharp] + // The RichTextEffect will be usable like this: `[example]Some text[/example]` + public string bbcode = "example"; + [/csharp] + [/codeblocks] [b]Note:[/b] As soon as a [RichTextLabel] contains at least one [RichTextEffect], it will continuously process the effect unless the project is paused. This may impact battery life negatively. </description> <tutorials> diff --git a/doc/classes/RichTextLabel.xml b/doc/classes/RichTextLabel.xml index 2c18bc493a..7ca70f5a7a 100644 --- a/doc/classes/RichTextLabel.xml +++ b/doc/classes/RichTextLabel.xml @@ -80,6 +80,27 @@ Returns the total number of paragraphs (newlines or [code]p[/code] tags in the tag stack's text tags). Considers wrapped text as one paragraph. </description> </method> + <method name="get_selected_text" qualifiers="const"> + <return type="String"> + </return> + <description> + Returns the current selection text. Does not include BBCodes. + </description> + </method> + <method name="get_selection_from" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the current selection first character index if a selection is active, [code]-1[/code] otherwise. Does not include BBCodes. + </description> + </method> + <method name="get_selection_to" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns the current selection last character index if a selection is active, [code]-1[/code] otherwise. Does not include BBCodes. + </description> + </method> <method name="get_total_character_count" qualifiers="const"> <return type="int"> </return> @@ -597,12 +618,15 @@ <theme_item name="focus" type="StyleBox"> The background The background used when the [RichTextLabel] is focused. </theme_item> - <theme_item name="font_shadow_color" type="Color" default="Color( 0, 0, 0, 0 )"> - The color of the font's shadow. + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The default tint of text outline. </theme_item> - <theme_item name="font_selected_color" type="Color" default="Color( 0.49, 0.49, 0.49, 1 )"> + <theme_item name="font_selected_color" type="Color" default="Color( 0, 0, 0, 1 )"> The color of selected text, used when [member selection_enabled] is [code]true[/code]. </theme_item> + <theme_item name="font_shadow_color" type="Color" default="Color( 0, 0, 0, 0 )"> + The color of the font's shadow. + </theme_item> <theme_item name="italics_font" type="Font"> The font used for italics text. </theme_item> @@ -627,6 +651,9 @@ <theme_item name="normal_font_size" type="int"> The default text font size. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="selection_color" type="Color" default="Color( 0.1, 0.1, 1, 0.8 )"> The color of the selection box. </theme_item> diff --git a/doc/classes/RigidBody2D.xml b/doc/classes/RigidBody2D.xml index 6b27c77f26..ed375a8b1e 100644 --- a/doc/classes/RigidBody2D.xml +++ b/doc/classes/RigidBody2D.xml @@ -4,7 +4,7 @@ A body that is controlled by the 2D physics engine. </brief_description> <description> - This node implements simulated 2D physics. You do not control a RigidBody2D directly. Instead you apply forces to it (gravity, impulses, etc.) and the physics simulation calculates the resulting movement based on its mass, friction, and other physical properties. + This node implements simulated 2D physics. You do not control a RigidBody2D directly. Instead, you apply forces to it (gravity, impulses, etc.) and the physics simulation calculates the resulting movement based on its mass, friction, and other physical properties. A RigidBody2D has 4 behavior [member mode]s: Rigid, Static, Character, and Kinematic. [b]Note:[/b] You should not change a RigidBody2D's [code]position[/code] or [code]linear_velocity[/code] every frame or even very often. If you need to directly affect the body's state, use [method _integrate_forces], which allows you to directly access the physics state. Please also keep in mind that physics bodies manage their own transform which overwrites the ones you set. So any direct or indirect transformation (including scaling of the node or its parent) will be visible in the editor only, and immediately reset at runtime. diff --git a/doc/classes/SceneTree.xml b/doc/classes/SceneTree.xml index cfe6e4f738..9366d7dd44 100644 --- a/doc/classes/SceneTree.xml +++ b/doc/classes/SceneTree.xml @@ -5,7 +5,7 @@ </brief_description> <description> As one of the most important classes, the [SceneTree] manages the hierarchy of nodes in a scene as well as scenes themselves. Nodes can be added, retrieved and removed. The whole scene tree (and thus the current scene) can be paused. Scenes can be loaded, switched and reloaded. - You can also use the [SceneTree] to organize your nodes into groups: every node can be assigned as many groups as you want to create, e.g. a "enemy" group. You can then iterate these groups or even call methods and set properties on all the group's members at once. + You can also use the [SceneTree] to organize your nodes into groups: every node can be assigned as many groups as you want to create, e.g. an "enemy" group. You can then iterate these groups or even call methods and set properties on all the group's members at once. [SceneTree] is the default [MainLoop] implementation used by scenes, and is thus in charge of the game loop. </description> <tutorials> @@ -64,20 +64,38 @@ </return> <argument index="0" name="time_sec" type="float"> </argument> - <argument index="1" name="pause_mode_process" type="bool" default="true"> + <argument index="1" name="process_always" type="bool" default="true"> </argument> <description> - Returns a [SceneTreeTimer] which will [signal SceneTreeTimer.timeout] after the given time in seconds elapsed in this [SceneTree]. If [code]pause_mode_process[/code] is set to [code]false[/code], pausing the [SceneTree] will also pause the timer. + Returns a [SceneTreeTimer] which will [signal SceneTreeTimer.timeout] after the given time in seconds elapsed in this [SceneTree]. If [code]process_always[/code] is set to [code]false[/code], pausing the [SceneTree] will also pause the timer. Commonly used to create a one-shot delay timer as in the following example: - [codeblock] + [codeblocks] + [gdscript] func some_function(): print("start") yield(get_tree().create_timer(1.0), "timeout") print("end") - [/codeblock] + [/gdscript] + [csharp] + public async void SomeFunction() + { + GD.Print("start"); + await ToSignal(GetTree().CreateTimer(1.0f), "timeout"); + GD.Print("end"); + } + [/csharp] + [/codeblocks] The timer will be automatically freed after its time elapses. </description> </method> + <method name="get_first_node_in_group"> + <return type="Node"> + </return> + <argument index="0" name="group" type="StringName"> + </argument> + <description> + </description> + </method> <method name="get_frame" qualifiers="const"> <return type="int"> </return> @@ -181,10 +199,12 @@ <method name="quit"> <return type="void"> </return> - <argument index="0" name="exit_code" type="int" default="-1"> + <argument index="0" name="exit_code" type="int" default="0"> </argument> <description> - Quits the application at the end of the current iteration. A process [code]exit_code[/code] can optionally be passed as an argument. If this argument is [code]0[/code] or greater, it will override the [member OS.exit_code] defined before quitting the application. + Quits the application at the end of the current iteration. Argument [code]exit_code[/code] can optionally be given (defaulting to 0) to customize the exit status code. + By convention, an exit code of [code]0[/code] indicates success whereas a non-zero exit code indicates an error. + For portability reasons, the exit code should be set between 0 and 125 (inclusive). </description> </method> <method name="reload_current_scene"> @@ -361,6 +381,11 @@ Emitted whenever the [SceneTree] hierarchy changed (children being moved or renamed, etc.). </description> </signal> + <signal name="tree_process_mode_changed"> + <description> + This signal is only emitted in the editor, it allows the editor to update the visibility of disabled nodes. Emitted whenever any node's [member Node.process_mode] is changed. + </description> + </signal> </signals> <constants> <constant name="GROUP_CALL_DEFAULT" value="0" enum="GroupCallFlags"> diff --git a/doc/classes/SceneTreeTimer.xml b/doc/classes/SceneTreeTimer.xml index a4a83fa65b..b223bf6821 100644 --- a/doc/classes/SceneTreeTimer.xml +++ b/doc/classes/SceneTreeTimer.xml @@ -6,12 +6,22 @@ <description> A one-shot timer managed by the scene tree, which emits [signal timeout] on completion. See also [method SceneTree.create_timer]. As opposed to [Timer], it does not require the instantiation of a node. Commonly used to create a one-shot delay timer as in the following example: - [codeblock] + [codeblocks] + [gdscript] func some_function(): print("Timer started.") yield(get_tree().create_timer(1.0), "timeout") print("Timer ended.") - [/codeblock] + [/gdscript] + [csharp] + public async void SomeFunction() + { + GD.Print("Timer started."); + await ToSignal(GetTree().CreateTimer(1.0f), "timeout"); + GD.Print("Timer ended."); + } + [/csharp] + [/codeblocks] </description> <tutorials> </tutorials> diff --git a/doc/classes/ScriptCreateDialog.xml b/doc/classes/ScriptCreateDialog.xml index aa60ecb12b..7185213c44 100644 --- a/doc/classes/ScriptCreateDialog.xml +++ b/doc/classes/ScriptCreateDialog.xml @@ -5,12 +5,24 @@ </brief_description> <description> The [ScriptCreateDialog] creates script files according to a given template for a given scripting language. The standard use is to configure its fields prior to calling one of the [method Window.popup] methods. - [codeblock] + [codeblocks] + [gdscript] func _ready(): - dialog.config("Node", "res://new_node.gd") # For in-engine types - dialog.config("\"res://base_node.gd\"", "res://derived_node.gd") # For script types + var dialog = ScriptCreateDialog.new(); + dialog.config("Node", "res://new_node.gd") # For in-engine types. + dialog.config("\"res://base_node.gd\"", "res://derived_node.gd") # For script types. dialog.popup_centered() - [/codeblock] + [/gdscript] + [csharp] + public override void _Ready() + { + var dialog = new ScriptCreateDialog(); + dialog.Config("Node", "res://NewNode.cs"); // For in-engine types. + dialog.Config("\"res://BaseNode.cs\"", "res://DerivedNode.cs"); // For script types. + dialog.PopupCentered(); + } + [/csharp] + [/codeblocks] </description> <tutorials> </tutorials> diff --git a/doc/classes/ScriptEditor.xml b/doc/classes/ScriptEditor.xml index d5a32dd20c..28620bd29b 100644 --- a/doc/classes/ScriptEditor.xml +++ b/doc/classes/ScriptEditor.xml @@ -37,6 +37,7 @@ <return type="ScriptEditorBase"> </return> <description> + Returns the [ScriptEditorBase] object that the user is currently editing. </description> </method> <method name="get_current_script"> @@ -60,6 +61,7 @@ <return type="Array"> </return> <description> + Returns an array with all [ScriptEditorBase] objects which are currently open in editor. </description> </method> <method name="get_open_scripts" qualifiers="const"> @@ -95,6 +97,8 @@ <argument index="0" name="syntax_highlighter" type="EditorSyntaxHighlighter"> </argument> <description> + Registers the [EditorSyntaxHighlighter] to the editor, the [EditorSyntaxHighlighter] will be available on all open scripts. + [b]Note:[/b] Does not apply to scripts that are already opened. </description> </method> <method name="unregister_syntax_highlighter"> @@ -103,6 +107,8 @@ <argument index="0" name="syntax_highlighter" type="EditorSyntaxHighlighter"> </argument> <description> + Unregisters the [EditorSyntaxHighlighter] from the editor. + [b]Note:[/b] The [EditorSyntaxHighlighter] will still be applied to scripts that are already opened. </description> </method> </methods> diff --git a/doc/classes/ScriptEditorBase.xml b/doc/classes/ScriptEditorBase.xml index 9968ae06c3..ee498de302 100644 --- a/doc/classes/ScriptEditorBase.xml +++ b/doc/classes/ScriptEditorBase.xml @@ -1,8 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="ScriptEditorBase" inherits="VBoxContainer" version="4.0"> <brief_description> + Base editor for editing scripts in the [ScriptEditor]. </brief_description> <description> + Base editor for editing scripts in the [ScriptEditor], this does not include documentation items. </description> <tutorials> </tutorials> @@ -13,34 +15,40 @@ <argument index="0" name="highlighter" type="Object"> </argument> <description> + Adds a [EditorSyntaxHighlighter] to the open script. </description> </method> </methods> <signals> <signal name="edited_script_changed"> <description> + Emitted after script validation. For visual scripts on modification. </description> </signal> <signal name="go_to_help"> <argument index="0" name="what" type="String"> </argument> <description> + Emitted when the user requests a specific documentation page. </description> </signal> <signal name="name_changed"> <description> + Emitted after script validation or when the edited resource has changed. Not used by visual scripts. </description> </signal> <signal name="replace_in_files_requested"> <argument index="0" name="text" type="String"> </argument> <description> + Emitted when the user request to find and replace text in the file system. Not used by visual scripts. </description> </signal> <signal name="request_help"> <argument index="0" name="topic" type="String"> </argument> <description> + Emitted when the user requests contextual help. </description> </signal> <signal name="request_open_script_at_line"> @@ -49,16 +57,19 @@ <argument index="1" name="line" type="int"> </argument> <description> + Emitted when the user requests a script. </description> </signal> <signal name="request_save_history"> <description> + Emitted when the user contextual goto and the item is in the same script. </description> </signal> <signal name="search_in_files_requested"> <argument index="0" name="text" type="String"> </argument> <description> + Emitted when the user request to search text in the file system. Not used by visual scripts. </description> </signal> </signals> diff --git a/doc/classes/Shape3D.xml b/doc/classes/Shape3D.xml index 2d8bb5d051..f8b749aebf 100644 --- a/doc/classes/Shape3D.xml +++ b/doc/classes/Shape3D.xml @@ -13,7 +13,8 @@ </methods> <members> <member name="margin" type="float" setter="set_margin" getter="get_margin" default="0.04"> - The collision margin for the shape. + The collision margin for the shape. Used in Bullet Physics only. + Collision margins allow collision detection to be more efficient by adding an extra shell around shapes. Collision algorithms are more expensive when objects overlap by more than their margin, so a higher value for margins is better for performance, at the cost of accuracy around edges as it makes them less sharp. </member> </members> <constants> diff --git a/doc/classes/Signal.xml b/doc/classes/Signal.xml index b7a2258fc1..84efc974c0 100644 --- a/doc/classes/Signal.xml +++ b/doc/classes/Signal.xml @@ -57,42 +57,42 @@ Disconnects this signal from the specified [Callable]. </description> </method> - <method name="emit" qualifiers="vararg"> + <method name="emit" qualifiers="vararg const"> <return type="void"> </return> <description> Emits this signal to all connected objects. </description> </method> - <method name="get_connections"> + <method name="get_connections" qualifiers="const"> <return type="Array"> </return> <description> Returns the list of [Callable]s connected to this signal. </description> </method> - <method name="get_name"> + <method name="get_name" qualifiers="const"> <return type="StringName"> </return> <description> Returns the name of this signal. </description> </method> - <method name="get_object"> + <method name="get_object" qualifiers="const"> <return type="Object"> </return> <description> Returns the object emitting this signal. </description> </method> - <method name="get_object_id"> + <method name="get_object_id" qualifiers="const"> <return type="int"> </return> <description> Returns the ID of the object emitting this signal (see [method Object.get_instance_id]). </description> </method> - <method name="is_connected"> + <method name="is_connected" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="callable" type="Callable"> @@ -101,7 +101,7 @@ Returns [code]true[/code] if the specified [Callable] is connected to this signal. </description> </method> - <method name="is_null"> + <method name="is_null" qualifiers="const"> <return type="bool"> </return> <description> diff --git a/doc/classes/Skeleton3D.xml b/doc/classes/Skeleton3D.xml index fe2cc1f5ad..c6dd6fb142 100644 --- a/doc/classes/Skeleton3D.xml +++ b/doc/classes/Skeleton3D.xml @@ -245,6 +245,16 @@ [b]Note[/b]: The pose transform needs to be in bone space. Use [method world_transform_to_bone_transform] to convert a world transform, like one you can get from a [Node3D], to bone space. </description> </method> + <method name="set_bone_name"> + <return type="void"> + </return> + <argument index="0" name="bone_idx" type="int"> + </argument> + <argument index="1" name="name" type="String"> + </argument> + <description> + </description> + </method> <method name="set_bone_parent"> <return type="void"> </return> @@ -297,7 +307,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Unparents the bone at [code]bone_idx[/code] and sets its rest position to that of it's parent prior to being reset. + Unparents the bone at [code]bone_idx[/code] and sets its rest position to that of its parent prior to being reset. </description> </method> <method name="world_transform_to_bone_transform"> diff --git a/doc/classes/Sky.xml b/doc/classes/Sky.xml index a77515b3e6..d9553a3be3 100644 --- a/doc/classes/Sky.xml +++ b/doc/classes/Sky.xml @@ -52,13 +52,13 @@ Automatically selects the appropriate process mode based on your sky shader. If your shader uses [code]TIME[/code] or [code]POSITION[/code], this will use [constant PROCESS_MODE_REALTIME]. If your shader uses any of the [code]LIGHT_*[/code] variables or any custom uniforms, this uses [constant PROCESS_MODE_INCREMENTAL]. Otherwise, this defaults to [constant PROCESS_MODE_QUALITY]. </constant> <constant name="PROCESS_MODE_QUALITY" value="1" enum="ProcessMode"> - Uses high quality importance sampling to process the radiance map. In general, this results in much higher quality than [constant PROCESS_MODE_REALTIME] but takes much longer to generate. This should not be used if you plan on changing the sky at runtime. If you are finding that the reflection is not blurry enough and is showing sparkles or fireflies, try increasing [member ProjectSettings.rendering/quality/reflections/ggx_samples]. + Uses high quality importance sampling to process the radiance map. In general, this results in much higher quality than [constant PROCESS_MODE_REALTIME] but takes much longer to generate. This should not be used if you plan on changing the sky at runtime. If you are finding that the reflection is not blurry enough and is showing sparkles or fireflies, try increasing [member ProjectSettings.rendering/reflections/sky_reflections/ggx_samples]. </constant> <constant name="PROCESS_MODE_INCREMENTAL" value="2" enum="ProcessMode"> - Uses the same high quality importance sampling to process the radiance map as [constant PROCESS_MODE_QUALITY], but updates over several frames. The number of frames is determined by [member ProjectSettings.rendering/quality/reflections/roughness_layers]. Use this when you need highest quality radiance maps, but have a sky that updates slowly. + Uses the same high quality importance sampling to process the radiance map as [constant PROCESS_MODE_QUALITY], but updates over several frames. The number of frames is determined by [member ProjectSettings.rendering/reflections/sky_reflections/roughness_layers]. Use this when you need highest quality radiance maps, but have a sky that updates slowly. </constant> <constant name="PROCESS_MODE_REALTIME" value="3" enum="ProcessMode"> - Uses the fast filtering algorithm to process the radiance map. In general this results in lower quality, but substantially faster run times. If you need better quality, but still need to update the sky every frame, consider turning on [member ProjectSettings.rendering/quality/reflections/fast_filter_high_quality]. + Uses the fast filtering algorithm to process the radiance map. In general this results in lower quality, but substantially faster run times. If you need better quality, but still need to update the sky every frame, consider turning on [member ProjectSettings.rendering/reflections/sky_reflections/fast_filter_high_quality]. [b]Note:[/b] The fast filtering algorithm is limited to 256x256 cubemaps, so [member radiance_size] must be set to [constant RADIANCE_SIZE_256]. </constant> </constants> diff --git a/doc/classes/SoftBody3D.xml b/doc/classes/SoftBody3D.xml index d3ab955570..7999ad774d 100644 --- a/doc/classes/SoftBody3D.xml +++ b/doc/classes/SoftBody3D.xml @@ -44,6 +44,12 @@ Returns an individual bit on the collision mask. </description> </method> + <method name="get_physics_rid" qualifiers="const"> + <return type="RID"> + </return> + <description> + </description> + </method> <method name="remove_collision_exception_with"> <return type="void"> </return> @@ -77,8 +83,6 @@ </method> </methods> <members> - <member name="areaAngular_stiffness" type="float" setter="set_areaAngular_stiffness" getter="get_areaAngular_stiffness" default="0.5"> - </member> <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer" default="1"> The physics layers this SoftBody3D is in. Collidable objects can exist in any of 32 different layers. These layers work like a tagging system, and are not visual. A collidable can use these layers to select with which objects it can collide, using the collision_mask property. @@ -96,8 +100,6 @@ <member name="parent_collision_ignore" type="NodePath" setter="set_parent_collision_ignore" getter="get_parent_collision_ignore" default="NodePath("")"> [NodePath] to a [CollisionObject3D] this SoftBody3D should avoid clipping. </member> - <member name="pose_matching_coefficient" type="float" setter="set_pose_matching_coefficient" getter="get_pose_matching_coefficient" default="0.0"> - </member> <member name="pressure_coefficient" type="float" setter="set_pressure_coefficient" getter="get_pressure_coefficient" default="0.0"> </member> <member name="ray_pickable" type="bool" setter="set_ray_pickable" getter="is_ray_pickable" default="true"> @@ -109,8 +111,6 @@ <member name="total_mass" type="float" setter="set_total_mass" getter="get_total_mass" default="1.0"> The SoftBody3D's mass. </member> - <member name="volume_stiffness" type="float" setter="set_volume_stiffness" getter="get_volume_stiffness" default="0.5"> - </member> </members> <constants> </constants> diff --git a/doc/classes/SpinBox.xml b/doc/classes/SpinBox.xml index e674ceb57e..7e2481f458 100644 --- a/doc/classes/SpinBox.xml +++ b/doc/classes/SpinBox.xml @@ -6,15 +6,25 @@ <description> SpinBox is a numerical input text field. It allows entering integers and floats. [b]Example:[/b] - [codeblock] + [codeblocks] + [gdscript] var spin_box = SpinBox.new() add_child(spin_box) var line_edit = spin_box.get_line_edit() line_edit.context_menu_enabled = false spin_box.align = LineEdit.ALIGN_RIGHT - [/codeblock] + [/gdscript] + [csharp] + var spinBox = new SpinBox(); + AddChild(spinBox); + var lineEdit = spinBox.GetLineEdit(); + lineEdit.ContextMenuEnabled = false; + spinBox.Align = LineEdit.AlignEnum.Right; + [/csharp] + [/codeblocks] The above code will create a [SpinBox], disable context menu on it and set the text alignment to right. See [Range] class for more options over the [SpinBox]. + [b]Note:[/b] [SpinBox] relies on an underlying [LineEdit] node. To theme a [SpinBox]'s background, add theme items for [LineEdit] and customize them. </description> <tutorials> </tutorials> diff --git a/doc/classes/Sprite2D.xml b/doc/classes/Sprite2D.xml index c56596423d..617ad3a371 100644 --- a/doc/classes/Sprite2D.xml +++ b/doc/classes/Sprite2D.xml @@ -15,12 +15,29 @@ </return> <description> Returns a [Rect2] representing the Sprite2D's boundary in local coordinates. Can be used to detect if the Sprite2D was clicked. Example: - [codeblock] + [codeblocks] + [gdscript] func _input(event): - if event is InputEventMouseButton and event.pressed and event.button_index == BUTTON_LEFT: + if event is InputEventMouseButton and event.pressed and event.button_index == MOUSE_BUTTON_LEFT: if get_rect().has_point(to_local(event.position)): print("A click!") - [/codeblock] + [/gdscript] + [csharp] + public override void _Input(InputEvent inputEvent) + { + if (inputEvent is InputEventMouseButton inputEventMouse) + { + if (inputEventMouse.Pressed && inputEventMouse.ButtonIndex == (int)ButtonList.Left) + { + if (GetRect().HasPoint(ToLocal(inputEventMouse.Position))) + { + GD.Print("A click!"); + } + } + } + } + [/csharp] + [/codeblocks] </description> </method> <method name="is_pixel_opaque" qualifiers="const"> @@ -56,11 +73,11 @@ <member name="offset" type="Vector2" setter="set_offset" getter="get_offset" default="Vector2( 0, 0 )"> The texture's drawing offset. </member> - <member name="region_enabled" type="bool" setter="set_region" getter="is_region" default="false"> + <member name="region_enabled" type="bool" setter="set_region_enabled" getter="is_region_enabled" default="false"> If [code]true[/code], texture is cut from a larger atlas texture. See [member region_rect]. </member> - <member name="region_filter_clip" type="bool" setter="set_region_filter_clip" getter="is_region_filter_clip_enabled" default="false"> - If [code]true[/code], the outermost pixels get blurred out. + <member name="region_filter_clip_enabled" type="bool" setter="set_region_filter_clip_enabled" getter="is_region_filter_clip_enabled" default="false"> + If [code]true[/code], the outermost pixels get blurred out. [member region_enabled] must be [code]true[/code]. </member> <member name="region_rect" type="Rect2" setter="set_region_rect" getter="get_region_rect" default="Rect2( 0, 0, 0, 0 )"> The region of the atlas texture to display. [member region_enabled] must be [code]true[/code]. diff --git a/doc/classes/Sprite3D.xml b/doc/classes/Sprite3D.xml index f9b947fa3d..658fd1a4f2 100644 --- a/doc/classes/Sprite3D.xml +++ b/doc/classes/Sprite3D.xml @@ -20,7 +20,7 @@ <member name="hframes" type="int" setter="set_hframes" getter="get_hframes" default="1"> The number of columns in the sprite sheet. </member> - <member name="region_enabled" type="bool" setter="set_region" getter="is_region" default="false"> + <member name="region_enabled" type="bool" setter="set_region_enabled" getter="is_region_enabled" default="false"> If [code]true[/code], texture will be cut from a larger atlas texture. See [member region_rect]. </member> <member name="region_rect" type="Rect2" setter="set_region_rect" getter="get_region_rect" default="Rect2( 0, 0, 0, 0 )"> diff --git a/doc/classes/SpriteBase3D.xml b/doc/classes/SpriteBase3D.xml index 44b08408c1..06b9c2b042 100644 --- a/doc/classes/SpriteBase3D.xml +++ b/doc/classes/SpriteBase3D.xml @@ -73,7 +73,7 @@ The texture's drawing offset. </member> <member name="opacity" type="float" setter="set_opacity" getter="get_opacity" default="1.0"> - The objects visibility on a scale from [code]0[/code] fully invisible to [code]1[/code] fully visible. + The objects' visibility on a scale from [code]0[/code] fully invisible to [code]1[/code] fully visible. </member> <member name="pixel_size" type="float" setter="set_pixel_size" getter="get_pixel_size" default="0.01"> The size of one pixel's width on the sprite to scale it in 3D. @@ -102,7 +102,7 @@ This mode performs standard alpha blending. It can display translucent areas, but transparency sorting issues may be visible when multiple transparent materials are overlapping. </constant> <constant name="ALPHA_CUT_DISCARD" value="1" enum="AlphaCutMode"> - This mode only allows fully transparent or fully opaque pixels. Harsh edges will be visible unless some form of screen-space antialiasing is enabled (see [member ProjectSettings.rendering/quality/screen_filters/screen_space_aa]). On the bright side, this mode doesn't suffer from transparency sorting issues when multiple transparent materials are overlapping. This mode is also known as [i]alpha testing[/i] or [i]1-bit transparency[/i]. + This mode only allows fully transparent or fully opaque pixels. Harsh edges will be visible unless some form of screen-space antialiasing is enabled (see [member ProjectSettings.rendering/anti_aliasing/quality/screen_space_aa]). On the bright side, this mode doesn't suffer from transparency sorting issues when multiple transparent materials are overlapping. This mode is also known as [i]alpha testing[/i] or [i]1-bit transparency[/i]. </constant> <constant name="ALPHA_CUT_OPAQUE_PREPASS" value="2" enum="AlphaCutMode"> This mode draws fully opaque pixels in the depth prepass. This is slower than [constant ALPHA_CUT_DISABLED] or [constant ALPHA_CUT_DISCARD], but it allows displaying translucent areas and smooth edges while using proper sorting. diff --git a/doc/classes/StreamPeer.xml b/doc/classes/StreamPeer.xml index a73d3c8212..a1b858acf6 100644 --- a/doc/classes/StreamPeer.xml +++ b/doc/classes/StreamPeer.xml @@ -212,9 +212,14 @@ <description> Puts a zero-terminated ASCII string into the stream prepended by a 32-bit unsigned integer representing its size. Note: To put an ASCII string without prepending its size, you can use [method put_data]: - [codeblock] + [codeblocks] + [gdscript] put_data("Hello world".to_ascii()) - [/codeblock] + [/gdscript] + [csharp] + PutData("Hello World".ToAscii()); + [/csharp] + [/codeblocks] </description> </method> <method name="put_u16"> @@ -261,9 +266,14 @@ <description> Puts a zero-terminated UTF-8 string into the stream prepended by a 32 bits unsigned integer representing its size. Note: To put an UTF-8 string without prepending its size, you can use [method put_data]: - [codeblock] + [codeblocks] + [gdscript] put_data("Hello world".to_utf8()) - [/codeblock] + [/gdscript] + [csharp] + PutData("Hello World".ToUTF8()); + [/csharp] + [/codeblocks] </description> </method> <method name="put_var"> diff --git a/doc/classes/StreamPeerTCP.xml b/doc/classes/StreamPeerTCP.xml index bb85d94bf9..b6d91715ee 100644 --- a/doc/classes/StreamPeerTCP.xml +++ b/doc/classes/StreamPeerTCP.xml @@ -61,8 +61,8 @@ <argument index="0" name="enabled" type="bool"> </argument> <description> - Disables Nagle's algorithm to improve latency for small packets. - [b]Note:[/b] For applications that send large packets or need to transfer a lot of data, this can decrease the total available bandwidth. + If [code]enabled[/code] is [code]true[/code], packets will be sent immediately. If [code]enabled[/code] is [code]false[/code] (the default), packet transfers will be delayed and combined using [url=https://en.wikipedia.org/wiki/Nagle%27s_algorithm]Nagle's algorithm[/url]. + [b]Note:[/b] It's recommended to leave this disabled for applications that send large packets or need to transfer a lot of data, as enabling this can decrease the total available bandwidth. </description> </method> </methods> diff --git a/doc/classes/String.xml b/doc/classes/String.xml index fcc70d166e..416438e648 100644 --- a/doc/classes/String.xml +++ b/doc/classes/String.xml @@ -44,7 +44,7 @@ Constructs a new String from the given [StringName]. </description> </method> - <method name="begins_with"> + <method name="begins_with" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="text" type="String"> @@ -53,29 +53,38 @@ Returns [code]true[/code] if the string begins with the given string. </description> </method> - <method name="bigrams"> + <method name="bigrams" qualifiers="const"> <return type="PackedStringArray"> </return> <description> Returns the bigrams (pairs of consecutive letters) of this string. </description> </method> - <method name="bin_to_int"> + <method name="bin_to_int" qualifiers="const"> <return type="int"> </return> - <argument index="0" name="with_prefix" type="bool" default="true"> - </argument> <description> + Converts a string containing a binary number into an integer. Binary strings can either be prefixed with [code]0b[/code] or not, and they can also start with a [code]-[/code] before the optional prefix. + [codeblocks] + [gdscript] + print("0x101".bin_to_int()) # Prints "5". + print("101".bin_to_int()) # Prints "5". + [/gdscript] + [csharp] + GD.Print("0x101".BinToInt()); // Prints "5". + GD.Print("101".BinToInt()); // Prints "5". + [/csharp] + [/codeblocks] </description> </method> - <method name="c_escape"> + <method name="c_escape" qualifiers="const"> <return type="String"> </return> <description> Returns a copy of the string with special characters escaped using the C language standard. </description> </method> - <method name="c_unescape"> + <method name="c_unescape" qualifiers="const"> <return type="String"> </return> <description> @@ -83,14 +92,14 @@ [b]Note:[/b] Unlike the GDScript parser, this method doesn't support the [code]\uXXXX[/code] escape sequence. </description> </method> - <method name="capitalize"> + <method name="capitalize" qualifiers="const"> <return type="String"> </return> <description> Changes the case of some letters. Replaces underscores with spaces, adds spaces before in-word uppercase characters, converts all letters to lowercase, then capitalizes the first letter and every letter following a space character. For [code]capitalize camelCase mixed_with_underscores[/code], it will return [code]Capitalize Camel Case Mixed With Underscores[/code]. </description> </method> - <method name="casecmp_to"> + <method name="casecmp_to" qualifiers="const"> <return type="int"> </return> <argument index="0" name="to" type="String"> @@ -102,7 +111,15 @@ To get a boolean result from a string comparison, use the [code]==[/code] operator instead. See also [method nocasecmp_to] and [method naturalnocasecmp_to]. </description> </method> - <method name="count"> + <method name="chr" qualifiers="static"> + <return type="String"> + </return> + <argument index="0" name="char" type="int"> + </argument> + <description> + </description> + </method> + <method name="count" qualifiers="const"> <return type="int"> </return> <argument index="0" name="what" type="String"> @@ -115,7 +132,7 @@ Returns the number of occurrences of substring [code]what[/code] between [code]from[/code] and [code]to[/code] positions. If [code]from[/code] and [code]to[/code] equals 0 the whole string will be used. If only [code]to[/code] equals 0 the remained substring will be used. </description> </method> - <method name="countn"> + <method name="countn" qualifiers="const"> <return type="int"> </return> <argument index="0" name="what" type="String"> @@ -128,14 +145,14 @@ Returns the number of occurrences of substring [code]what[/code] (ignoring case) between [code]from[/code] and [code]to[/code] positions. If [code]from[/code] and [code]to[/code] equals 0 the whole string will be used. If only [code]to[/code] equals 0 the remained substring will be used. </description> </method> - <method name="dedent"> + <method name="dedent" qualifiers="const"> <return type="String"> </return> <description> Returns a copy of the string with indentation (leading tabs and spaces) removed. </description> </method> - <method name="ends_with"> + <method name="ends_with" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="text" type="String"> @@ -144,7 +161,7 @@ Returns [code]true[/code] if the string ends with the given string. </description> </method> - <method name="find"> + <method name="find" qualifiers="const"> <return type="int"> </return> <argument index="0" name="what" type="String"> @@ -154,14 +171,18 @@ <description> Returns the index of the [b]first[/b] case-sensitive occurrence of the specified string in this instance, or [code]-1[/code]. Optionally, the starting search index can be specified, continuing to the end of the string. [b]Note:[/b] If you just want to know whether a string contains a substring, use the [code]in[/code] operator as follows: - [codeblock] - # Will evaluate to `false`. - if "i" in "team": - pass - [/codeblock] - </description> - </method> - <method name="findn"> + [codeblocks] + [gdscript] + print("i" in "team") # Will print `false`. + [/gdscript] + [csharp] + // C# has no in operator, but we can use `Contains()`. + GD.Print("team".Contains("i")); // Will print `false`. + [/csharp] + [/codeblocks] + </description> + </method> + <method name="findn" qualifiers="const"> <return type="int"> </return> <argument index="0" name="what" type="String"> @@ -172,7 +193,7 @@ Returns the index of the [b]first[/b] case-insensitive occurrence of the specified string in this instance, or [code]-1[/code]. Optionally, the starting search index can be specified, continuing to the end of the string. </description> </method> - <method name="format"> + <method name="format" qualifiers="const"> <return type="String"> </return> <argument index="0" name="values" type="Variant"> @@ -183,75 +204,67 @@ Formats the string by replacing all occurrences of [code]placeholder[/code] with [code]values[/code]. </description> </method> - <method name="get_base_dir"> + <method name="get_base_dir" qualifiers="const"> <return type="String"> </return> <description> If the string is a valid file path, returns the base directory name. </description> </method> - <method name="get_basename"> + <method name="get_basename" qualifiers="const"> <return type="String"> </return> <description> If the string is a valid file path, returns the full file path without the extension. </description> </method> - <method name="get_extension"> + <method name="get_extension" qualifiers="const"> <return type="String"> </return> <description> If the string is a valid file path, returns the extension. </description> </method> - <method name="get_file"> + <method name="get_file" qualifiers="const"> <return type="String"> </return> <description> If the string is a valid file path, returns the filename. </description> </method> - <method name="hash"> + <method name="hash" qualifiers="const"> <return type="int"> </return> <description> Hashes the string and returns a 32-bit integer. </description> </method> - <method name="hex_to_int"> + <method name="hex_to_int" qualifiers="const"> <return type="int"> </return> - <argument index="0" name="with_prefix" type="bool" default="true"> - </argument> <description> - Converts a string containing a hexadecimal number into a decimal integer. If [code]with_prefix[/code] is [code]true[/code], the hexadecimal string should start with the [code]0x[/code] prefix, otherwise [code]0[/code] is returned. - [codeblock] - print("0xff".hex_to_int()) # Print "255" - print("ab".hex_to_int(false)) # Print "171" - [/codeblock] + Converts a string containing a hexadecimal number into an integer. Hexadecimal strings can either be prefixed with [code]0x[/code] or not, and they can also start with a [code]-[/code] before the optional prefix. + [codeblocks] + [gdscript] + print("0xff".hex_to_int()) # Prints "255". + print("ab".hex_to_int()) # Prints "171". + [/gdscript] + [csharp] + GD.Print("0xff".HexToInt()); // Prints "255". + GD.Print("ab".HexToInt()); // Prints "171". + [/csharp] + [/codeblocks] </description> </method> - <method name="http_escape"> - <return type="String"> - </return> - <description> - Escapes (encodes) a string to URL friendly format. Also referred to as 'URL encode'. - [codeblock] - print("https://example.org/?escaped=" + "Godot Engine:'docs'".http_escape()) - [/codeblock] - </description> - </method> - <method name="http_unescape"> + <method name="humanize_size" qualifiers="static"> <return type="String"> </return> + <argument index="0" name="size" type="int"> + </argument> <description> - Unescapes (decodes) a string in URL encoded format. Also referred to as 'URL decode'. - [codeblock] - print("https://example.org/?escaped=" + "Godot%20Engine%3A%27docs%27".http_unescape()) - [/codeblock] </description> </method> - <method name="insert"> + <method name="insert" qualifiers="const"> <return type="String"> </return> <argument index="0" name="position" type="int"> @@ -262,28 +275,28 @@ Returns a copy of the string with the substring [code]what[/code] inserted at the given position. </description> </method> - <method name="is_abs_path"> + <method name="is_abs_path" qualifiers="const"> <return type="bool"> </return> <description> If the string is a path to a file or directory, returns [code]true[/code] if the path is absolute. </description> </method> - <method name="is_empty"> + <method name="is_empty" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the length of the string equals [code]0[/code]. </description> </method> - <method name="is_rel_path"> + <method name="is_rel_path" qualifiers="const"> <return type="bool"> </return> <description> If the string is a path to a file or directory, returns [code]true[/code] if the path is relative. </description> </method> - <method name="is_subsequence_of"> + <method name="is_subsequence_of" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="text" type="String"> @@ -292,7 +305,7 @@ Returns [code]true[/code] if this string is a subsequence of the given string. </description> </method> - <method name="is_subsequence_ofi"> + <method name="is_subsequence_ofi" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="text" type="String"> @@ -301,7 +314,7 @@ Returns [code]true[/code] if this string is a subsequence of the given string, without considering case. </description> </method> - <method name="is_valid_filename"> + <method name="is_valid_filename" qualifiers="const"> <return type="bool"> </return> <description> @@ -309,14 +322,14 @@ [code]: / \ ? * " | % < >[/code] </description> </method> - <method name="is_valid_float"> + <method name="is_valid_float" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if this string contains a valid float. </description> </method> - <method name="is_valid_hex_number"> + <method name="is_valid_hex_number" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="with_prefix" type="bool" default="false"> @@ -325,35 +338,35 @@ Returns [code]true[/code] if this string contains a valid hexadecimal number. If [code]with_prefix[/code] is [code]true[/code], then a validity of the hexadecimal number is determined by [code]0x[/code] prefix, for instance: [code]0xDEADC0DE[/code]. </description> </method> - <method name="is_valid_html_color"> + <method name="is_valid_html_color" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if this string contains a valid color in hexadecimal HTML notation. Other HTML notations such as named colors or [code]hsl()[/code] colors aren't considered valid by this method and will return [code]false[/code]. </description> </method> - <method name="is_valid_identifier"> + <method name="is_valid_identifier" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if this string is a valid identifier. A valid identifier may contain only letters, digits and underscores ([code]_[/code]) and the first character may not be a digit. </description> </method> - <method name="is_valid_integer"> + <method name="is_valid_integer" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if this string contains a valid integer. </description> </method> - <method name="is_valid_ip_address"> + <method name="is_valid_ip_address" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if this string contains only a well-formatted IPv4 or IPv6 address. This method considers [url=https://en.wikipedia.org/wiki/Reserved_IP_addresses]reserved IP addresses[/url] such as [code]0.0.0.0[/code] as valid. </description> </method> - <method name="join"> + <method name="join" qualifiers="const"> <return type="String"> </return> <argument index="0" name="parts" type="PackedStringArray"> @@ -361,19 +374,24 @@ <description> Return a [String] which is the concatenation of the [code]parts[/code]. The separator between elements is the string providing this method. Example: - [codeblock] + [codeblocks] + [gdscript] print(", ".join(["One", "Two", "Three", "Four"])) - [/codeblock] + [/gdscript] + [csharp] + GD.Print(String.Join(",", new string[] {"One", "Two", "Three", "Four"})); + [/csharp] + [/codeblocks] </description> </method> - <method name="json_escape"> + <method name="json_escape" qualifiers="const"> <return type="String"> </return> <description> Returns a copy of the string with special characters escaped using the JSON standard. </description> </method> - <method name="left"> + <method name="left" qualifiers="const"> <return type="String"> </return> <argument index="0" name="position" type="int"> @@ -382,14 +400,14 @@ Returns a number of characters from the left of the string. </description> </method> - <method name="length"> + <method name="length" qualifiers="const"> <return type="int"> </return> <description> Returns the string's amount of characters. </description> </method> - <method name="lpad"> + <method name="lpad" qualifiers="const"> <return type="String"> </return> <argument index="0" name="min_length" type="int"> @@ -400,7 +418,7 @@ Formats a string to be at least [code]min_length[/code] long by adding [code]character[/code]s to the left of the string. </description> </method> - <method name="lstrip"> + <method name="lstrip" qualifiers="const"> <return type="String"> </return> <argument index="0" name="chars" type="String"> @@ -410,7 +428,7 @@ [b]Note:[/b] The [code]chars[/code] is not a prefix. See [method trim_prefix] method that will remove a single prefix string rather than a set of characters. </description> </method> - <method name="match"> + <method name="match" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="expr" type="String"> @@ -419,7 +437,7 @@ Does a simple case-sensitive expression match, where [code]"*"[/code] matches zero or more arbitrary characters and [code]"?"[/code] matches any single character except a period ([code]"."[/code]). </description> </method> - <method name="matchn"> + <method name="matchn" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="expr" type="String"> @@ -428,21 +446,21 @@ Does a simple case-insensitive expression match, where [code]"*"[/code] matches zero or more arbitrary characters and [code]"?"[/code] matches any single character except a period ([code]"."[/code]). </description> </method> - <method name="md5_buffer"> + <method name="md5_buffer" qualifiers="const"> <return type="PackedByteArray"> </return> <description> Returns the MD5 hash of the string as an array of bytes. </description> </method> - <method name="md5_text"> + <method name="md5_text" qualifiers="const"> <return type="String"> </return> <description> Returns the MD5 hash of the string as a string. </description> </method> - <method name="naturalnocasecmp_to"> + <method name="naturalnocasecmp_to" qualifiers="const"> <return type="int"> </return> <argument index="0" name="to" type="String"> @@ -455,7 +473,7 @@ To get a boolean result from a string comparison, use the [code]==[/code] operator instead. See also [method nocasecmp_to] and [method casecmp_to]. </description> </method> - <method name="nocasecmp_to"> + <method name="nocasecmp_to" qualifiers="const"> <return type="int"> </return> <argument index="0" name="to" type="String"> @@ -467,6 +485,24 @@ To get a boolean result from a string comparison, use the [code]==[/code] operator instead. See also [method casecmp_to] and [method naturalnocasecmp_to]. </description> </method> + <method name="num" qualifiers="static"> + <return type="String"> + </return> + <argument index="0" name="number" type="float"> + </argument> + <argument index="1" name="decimals" type="int" default="-1"> + </argument> + <description> + </description> + </method> + <method name="num_scientific" qualifiers="static"> + <return type="String"> + </return> + <argument index="0" name="number" type="float"> + </argument> + <description> + </description> + </method> <method name="operator !=" qualifiers="operator"> <return type="bool"> </return> @@ -547,16 +583,7 @@ <description> </description> </method> - <method name="ord_at"> - <return type="int"> - </return> - <argument index="0" name="at" type="int"> - </argument> - <description> - Returns the character code at position [code]at[/code]. - </description> - </method> - <method name="pad_decimals"> + <method name="pad_decimals" qualifiers="const"> <return type="String"> </return> <argument index="0" name="digits" type="int"> @@ -565,7 +592,7 @@ Formats a number to have an exact number of [code]digits[/code] after the decimal point. </description> </method> - <method name="pad_zeros"> + <method name="pad_zeros" qualifiers="const"> <return type="String"> </return> <argument index="0" name="digits" type="int"> @@ -574,21 +601,7 @@ Formats a number to have an exact number of [code]digits[/code] before the decimal point. </description> </method> - <method name="percent_decode"> - <return type="String"> - </return> - <description> - Decode a percent-encoded string. See [method percent_encode]. - </description> - </method> - <method name="percent_encode"> - <return type="String"> - </return> - <description> - Percent-encodes a string. Encodes parameters in a URL when sending a HTTP GET request (and bodies of form-urlencoded POST requests). - </description> - </method> - <method name="plus_file"> + <method name="plus_file" qualifiers="const"> <return type="String"> </return> <argument index="0" name="file" type="String"> @@ -597,7 +610,7 @@ If the string is a path, this concatenates [code]file[/code] at the end of the string as a subpath. E.g. [code]"this/is".plus_file("path") == "this/is/path"[/code]. </description> </method> - <method name="repeat"> + <method name="repeat" qualifiers="const"> <return type="String"> </return> <argument index="0" name="count" type="int"> @@ -606,7 +619,7 @@ Returns original string repeated a number of times. The number of repetitions is given by the argument. </description> </method> - <method name="replace"> + <method name="replace" qualifiers="const"> <return type="String"> </return> <argument index="0" name="what" type="String"> @@ -617,7 +630,7 @@ Replaces occurrences of a case-sensitive substring with the given one inside the string. </description> </method> - <method name="replacen"> + <method name="replacen" qualifiers="const"> <return type="String"> </return> <argument index="0" name="what" type="String"> @@ -628,7 +641,7 @@ Replaces occurrences of a case-insensitive substring with the given one inside the string. </description> </method> - <method name="rfind"> + <method name="rfind" qualifiers="const"> <return type="int"> </return> <argument index="0" name="what" type="String"> @@ -639,7 +652,7 @@ Returns the index of the [b]last[/b] case-sensitive occurrence of the specified string in this instance, or [code]-1[/code]. Optionally, the starting search index can be specified, continuing to the beginning of the string. </description> </method> - <method name="rfindn"> + <method name="rfindn" qualifiers="const"> <return type="int"> </return> <argument index="0" name="what" type="String"> @@ -650,7 +663,7 @@ Returns the index of the [b]last[/b] case-insensitive occurrence of the specified string in this instance, or [code]-1[/code]. Optionally, the starting search index can be specified, continuing to the beginning of the string. </description> </method> - <method name="right"> + <method name="right" qualifiers="const"> <return type="String"> </return> <argument index="0" name="position" type="int"> @@ -659,7 +672,7 @@ Returns the right side of the string from a given position. </description> </method> - <method name="rpad"> + <method name="rpad" qualifiers="const"> <return type="String"> </return> <argument index="0" name="min_length" type="int"> @@ -670,7 +683,7 @@ Formats a string to be at least [code]min_length[/code] long by adding [code]character[/code]s to the right of the string. </description> </method> - <method name="rsplit"> + <method name="rsplit" qualifiers="const"> <return type="PackedStringArray"> </return> <argument index="0" name="delimiter" type="String"> @@ -684,16 +697,21 @@ The splits in the returned array are sorted in the same order as the original string, from left to right. If [code]maxsplit[/code] is specified, it defines the number of splits to do from the right up to [code]maxsplit[/code]. The default value of 0 means that all items are split, thus giving the same result as [method split]. Example: - [codeblock] + [codeblocks] + [gdscript] var some_string = "One,Two,Three,Four" var some_array = some_string.rsplit(",", true, 1) print(some_array.size()) # Prints 2 print(some_array[0]) # Prints "Four" print(some_array[1]) # Prints "Three,Two,One" - [/codeblock] + [/gdscript] + [csharp] + // There is no Rsplit. + [/csharp] + [/codeblocks] </description> </method> - <method name="rstrip"> + <method name="rstrip" qualifiers="const"> <return type="String"> </return> <argument index="0" name="chars" type="String"> @@ -703,35 +721,35 @@ [b]Note:[/b] The [code]chars[/code] is not a suffix. See [method trim_suffix] method that will remove a single suffix string rather than a set of characters. </description> </method> - <method name="sha1_buffer"> + <method name="sha1_buffer" qualifiers="const"> <return type="PackedByteArray"> </return> <description> Returns the SHA-1 hash of the string as an array of bytes. </description> </method> - <method name="sha1_text"> + <method name="sha1_text" qualifiers="const"> <return type="String"> </return> <description> Returns the SHA-1 hash of the string as a string. </description> </method> - <method name="sha256_buffer"> + <method name="sha256_buffer" qualifiers="const"> <return type="PackedByteArray"> </return> <description> Returns the SHA-256 hash of the string as an array of bytes. </description> </method> - <method name="sha256_text"> + <method name="sha256_text" qualifiers="const"> <return type="String"> </return> <description> Returns the SHA-256 hash of the string as a string. </description> </method> - <method name="similarity"> + <method name="similarity" qualifiers="const"> <return type="float"> </return> <argument index="0" name="text" type="String"> @@ -740,7 +758,7 @@ Returns the similarity index of the text compared to this string. 1 means totally similar and 0 means totally dissimilar. </description> </method> - <method name="split"> + <method name="split" qualifiers="const"> <return type="PackedStringArray"> </return> <argument index="0" name="delimiter" type="String"> @@ -753,17 +771,25 @@ Splits the string by a [code]delimiter[/code] string and returns an array of the substrings. The [code]delimiter[/code] can be of any length. If [code]maxsplit[/code] is specified, it defines the number of splits to do from the left up to [code]maxsplit[/code]. The default value of [code]0[/code] means that all items are split. Example: - [codeblock] + [codeblocks] + [gdscript] var some_string = "One,Two,Three,Four" var some_array = some_string.split(",", true, 1) print(some_array.size()) # Prints 2 - print(some_array[0]) # Prints "One" - print(some_array[1]) # Prints "Two,Three,Four" - [/codeblock] + print(some_array[0]) # Prints "Four" + print(some_array[1]) # Prints "Three,Two,One" + [/gdscript] + [csharp] + var someString = "One,Two,Three,Four"; + var someArray = someString.Split(",", true); // This is as close as it gets to Godots API. + GD.Print(someArray[0]); // Prints "Four" + GD.Print(someArray[1]); // Prints "Three,Two,One" + [/csharp] + [/codeblocks] If you need to split strings with more complex rules, use the [RegEx] class instead. </description> </method> - <method name="split_floats"> + <method name="split_floats" qualifiers="const"> <return type="PackedFloat32Array"> </return> <argument index="0" name="delimiter" type="String"> @@ -775,7 +801,7 @@ For example, [code]"1,2.5,3"[/code] will return [code][1,2.5,3][/code] if split by [code]","[/code]. </description> </method> - <method name="strip_edges"> + <method name="strip_edges" qualifiers="const"> <return type="String"> </return> <argument index="0" name="left" type="bool" default="true"> @@ -786,14 +812,14 @@ Returns a copy of the string stripped of any non-printable character (including tabulations, spaces and line breaks) at the beginning and the end. The optional arguments are used to toggle stripping on the left and right edges respectively. </description> </method> - <method name="strip_escapes"> + <method name="strip_escapes" qualifiers="const"> <return type="String"> </return> <description> Returns a copy of the string stripped of any escape character. These include all non-printable control characters of the first page of the ASCII table (< 32), such as tabulation ([code]\t[/code] in C) and newline ([code]\n[/code] and [code]\r[/code]) characters, but not spaces. </description> </method> - <method name="substr"> + <method name="substr" qualifiers="const"> <return type="String"> </return> <argument index="0" name="from" type="int"> @@ -804,63 +830,63 @@ Returns part of the string from the position [code]from[/code] with length [code]len[/code]. Argument [code]len[/code] is optional and using [code]-1[/code] will return remaining characters from given position. </description> </method> - <method name="to_ascii_buffer"> + <method name="to_ascii_buffer" qualifiers="const"> <return type="PackedByteArray"> </return> <description> Converts the String (which is a character array) to ASCII/Latin-1 encoded [PackedByteArray] (which is an array of bytes). The conversion is faster compared to [method to_utf8_buffer], as this method assumes that all the characters in the String are ASCII/Latin-1 characters, unsupported characters are replaced with spaces. </description> </method> - <method name="to_float"> + <method name="to_float" qualifiers="const"> <return type="float"> </return> <description> Converts a string containing a decimal number into a [code]float[/code]. </description> </method> - <method name="to_int"> + <method name="to_int" qualifiers="const"> <return type="int"> </return> <description> Converts a string containing an integer number into an [code]int[/code]. </description> </method> - <method name="to_lower"> + <method name="to_lower" qualifiers="const"> <return type="String"> </return> <description> Returns the string converted to lowercase. </description> </method> - <method name="to_upper"> + <method name="to_upper" qualifiers="const"> <return type="String"> </return> <description> Returns the string converted to uppercase. </description> </method> - <method name="to_utf16_buffer"> + <method name="to_utf16_buffer" qualifiers="const"> <return type="PackedByteArray"> </return> <description> Converts the String (which is an array of characters) to UTF-16 encoded [PackedByteArray] (which is an array of bytes). </description> </method> - <method name="to_utf32_buffer"> + <method name="to_utf32_buffer" qualifiers="const"> <return type="PackedByteArray"> </return> <description> Converts the String (which is an array of characters) to UTF-32 encoded [PackedByteArray] (which is an array of bytes). </description> </method> - <method name="to_utf8_buffer"> + <method name="to_utf8_buffer" qualifiers="const"> <return type="PackedByteArray"> </return> <description> Converts the String (which is an array of characters) to UTF-8 encode [PackedByteArray] (which is an array of bytes). The conversion is a bit slower than [method to_ascii_buffer], but supports all UTF-8 characters. Therefore, you should prefer this function over [method to_ascii_buffer]. </description> </method> - <method name="trim_prefix"> + <method name="trim_prefix" qualifiers="const"> <return type="String"> </return> <argument index="0" name="prefix" type="String"> @@ -869,7 +895,7 @@ Removes a given string from the start if it starts with it or leaves the string unchanged. </description> </method> - <method name="trim_suffix"> + <method name="trim_suffix" qualifiers="const"> <return type="String"> </return> <argument index="0" name="suffix" type="String"> @@ -878,7 +904,53 @@ Removes a given string from the end if it ends with it or leaves the string unchanged. </description> </method> - <method name="xml_escape"> + <method name="unicode_at" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="at" type="int"> + </argument> + <description> + Returns the character code at position [code]at[/code]. + </description> + </method> + <method name="uri_decode" qualifiers="const"> + <return type="String"> + </return> + <description> + Decodes a string in URL encoded format. This is meant to decode parameters in a URL when receiving an HTTP request. + [codeblocks] + [gdscript] + print("https://example.org/?escaped=" + "Godot%20Engine%3A%27docs%27".uri_decode()) + [/gdscript] + [csharp] + GD.Print("https://example.org/?escaped=" + "Godot%20Engine%3a%27Docs%27".URIDecode()); + [/csharp] + [/codeblocks] + </description> + </method> + <method name="uri_encode" qualifiers="const"> + <return type="String"> + </return> + <description> + Encodes a string to URL friendly format. This is meant to encode parameters in a URL when sending an HTTP request. + [codeblocks] + [gdscript] + print("https://example.org/?escaped=" + "Godot Engine:'docs'".uri_encode()) + [/gdscript] + [csharp] + GD.Print("https://example.org/?escaped=" + "Godot Engine:'docs'".URIEncode()); + [/csharp] + [/codeblocks] + </description> + </method> + <method name="validate_node_name" qualifiers="const"> + <return type="String"> + </return> + <description> + Removes any characters from the string that are prohibited in [Node] names ([code].[/code] [code]:[/code] [code]@[/code] [code]/[/code] [code]"[/code]). + </description> + </method> + <method name="xml_escape" qualifiers="const"> <return type="String"> </return> <argument index="0" name="escape_quotes" type="bool" default="false"> @@ -887,7 +959,7 @@ Returns a copy of the string with special characters escaped using the XML standard. If [code]escape_quotes[/code] is [code]true[/code], the single quote ([code]'[/code]) and double quote ([code]"[/code]) characters are also escaped. </description> </method> - <method name="xml_unescape"> + <method name="xml_unescape" qualifiers="const"> <return type="String"> </return> <description> diff --git a/doc/classes/StringName.xml b/doc/classes/StringName.xml index af0074f080..be32f6a234 100644 --- a/doc/classes/StringName.xml +++ b/doc/classes/StringName.xml @@ -4,7 +4,7 @@ An optimized string type for unique names. </brief_description> <description> - [StringName]s are immutable strings designed for general-purpose represention of unique names. [StringName] ensures that only one instance of a given name exists (so two [StringName]s with the same value are the same object). Comparing them is much faster than with regular [String]s, because only the pointers are compared, not the whole strings. + [StringName]s are immutable strings designed for general-purpose representation of unique names. [StringName] ensures that only one instance of a given name exists (so two [StringName]s with the same value are the same object). Comparing them is much faster than with regular [String]s, because only the pointers are compared, not the whole strings. </description> <tutorials> </tutorials> diff --git a/doc/classes/StyleBoxFlat.xml b/doc/classes/StyleBoxFlat.xml index 13ea7df294..d66ae210ec 100644 --- a/doc/classes/StyleBoxFlat.xml +++ b/doc/classes/StyleBoxFlat.xml @@ -4,12 +4,12 @@ Customizable [StyleBox] with a given set of parameters (no texture required). </brief_description> <description> - This [StyleBox] can be used to achieve all kinds of looks without the need of a texture. Those properties are customizable: + This [StyleBox] can be used to achieve all kinds of looks without the need of a texture. The following properties are customizable: - Color - Border width (individual width for each border) - Rounded corners (individual radius for each corner) - Shadow (with blur and offset) - Setting corner radius to high values is allowed. As soon as corners would overlap, the stylebox will switch to a relative system. Example: + Setting corner radius to high values is allowed. As soon as corners overlap, the stylebox will switch to a relative system. Example: [codeblock] height = 30 corner_radius_top_left = 50 @@ -178,8 +178,8 @@ Border width for the top border. </member> <member name="corner_detail" type="int" setter="set_corner_detail" getter="get_corner_detail" default="8"> - This sets the amount of vertices used for each corner. Higher values result in rounder corners but take more processing power to compute. When choosing a value, you should take the corner radius ([method set_corner_radius_all]) into account. - For corner radii smaller than 10, [code]4[/code] or [code]5[/code] should be enough. For corner radii smaller than 30, values between [code]8[/code] and [code]12[/code] should be enough. + This sets the number of vertices used for each corner. Higher values result in rounder corners but take more processing power to compute. When choosing a value, you should take the corner radius ([method set_corner_radius_all]) into account. + For corner radii less than 10, [code]4[/code] or [code]5[/code] should be enough. For corner radii less than 30, values between [code]8[/code] and [code]12[/code] should be enough. A corner detail of [code]1[/code] will result in chamfered corners instead of rounded corners, which is useful for some artistic effects. </member> <member name="corner_radius_bottom_left" type="int" setter="set_corner_radius" getter="get_corner_radius" default="0"> diff --git a/doc/classes/SurfaceTool.xml b/doc/classes/SurfaceTool.xml index e10b65e309..1195e4aa2b 100644 --- a/doc/classes/SurfaceTool.xml +++ b/doc/classes/SurfaceTool.xml @@ -5,13 +5,22 @@ </brief_description> <description> The [SurfaceTool] is used to construct a [Mesh] by specifying vertex attributes individually. It can be used to construct a [Mesh] from a script. All properties except indices need to be added before calling [method add_vertex]. For example, to add vertex colors and UVs: - [codeblock] + [codeblocks] + [gdscript] var st = SurfaceTool.new() st.begin(Mesh.PRIMITIVE_TRIANGLES) st.set_color(Color(1, 0, 0)) st.set_uv(Vector2(0, 0)) st.set_vertex(Vector3(0, 0, 0)) - [/codeblock] + [/gdscript] + [csharp] + var st = new SurfaceTool(); + st.Begin(Mesh.PrimitiveType.Triangles); + st.SetColor(new Color(1, 0, 0)); + st.SetUv(new Vector2(0, 0)); + st.SetVertex(new Vector3(0, 0, 0)); + [/csharp] + [/codeblocks] The above [SurfaceTool] now contains one vertex of a triangle which has a UV coordinate and a specified [Color]. If another vertex were added without calling [method set_uv] or [method set_color], then the last values would be used. Vertex attributes must be passed [b]before[/b] calling [method add_vertex]. Failure to do so will result in an error when committing the vertex information to a mesh. Additionally, the attributes used before the first vertex is added determine the format of the mesh. For example, if you only add UVs to the first vertex, you cannot add color to any of the subsequent vertices. @@ -155,8 +164,8 @@ <argument index="0" name="flip" type="bool" default="false"> </argument> <description> - Generates normals from vertices so you do not have to do it manually. If [code]flip[/code] is [code]true[/code], the resulting normals will be inverted. - Requires the primitive type to be set to [constant Mesh.PRIMITIVE_TRIANGLES]. + Generates normals from vertices so you do not have to do it manually. If [code]flip[/code] is [code]true[/code], the resulting normals will be inverted. [method generate_normals] should be called [i]after[/i] generating geometry and [i]before[/i] committing the mesh using [method commit] or [method commit_to_arrays]. + [b]Note:[/b] [method generate_normals] only works if the primitive type to be set to [constant Mesh.PRIMITIVE_TRIANGLES]. </description> </method> <method name="generate_tangents"> @@ -180,6 +189,12 @@ <description> </description> </method> + <method name="get_primitive" qualifiers="const"> + <return type="int" enum="Mesh.PrimitiveType"> + </return> + <description> + </description> + </method> <method name="get_skin_weight_count" qualifiers="const"> <return type="int" enum="SurfaceTool.SkinWeightCount"> </return> @@ -190,7 +205,7 @@ <return type="void"> </return> <description> - Shrinks the vertex array by creating an index array (avoids reusing vertices). + Shrinks the vertex array by creating an index array. This can improve performance by avoiding vertex reuse. </description> </method> <method name="optimize_indices_for_cache"> @@ -205,7 +220,7 @@ <argument index="0" name="bones" type="PackedInt32Array"> </argument> <description> - Specifies an array of bones for the next vertex to use. [code]bones[/code] must contain 4 integers. + Specifies an array of bones to use for the [i]next[/i] vertex. [code]bones[/code] must contain 4 integers. </description> </method> <method name="set_color"> @@ -214,7 +229,7 @@ <argument index="0" name="color" type="Color"> </argument> <description> - Specifies a [Color] for the next vertex to use. + Specifies a [Color] to use for the [i]next[/i] vertex. If every vertex needs to have this information set and you fail to submit it for the first vertex, this information may not be used at all. [b]Note:[/b] The material must have [member BaseMaterial3D.vertex_color_use_as_albedo] enabled for the vertex color to be visible. </description> </method> @@ -253,7 +268,7 @@ <argument index="0" name="normal" type="Vector3"> </argument> <description> - Specifies a normal for the next vertex to use. + Specifies a normal to use for the [i]next[/i] vertex. If every vertex needs to have this information set and you fail to submit it for the first vertex, this information may not be used at all. </description> </method> <method name="set_skin_weight_count"> @@ -279,7 +294,7 @@ <argument index="0" name="tangent" type="Plane"> </argument> <description> - Specifies a tangent for the next vertex to use. + Specifies a tangent to use for the [i]next[/i] vertex. If every vertex needs to have this information set and you fail to submit it for the first vertex, this information may not be used at all. </description> </method> <method name="set_uv"> @@ -288,7 +303,7 @@ <argument index="0" name="uv" type="Vector2"> </argument> <description> - Specifies a set of UV coordinates to use for the next vertex. + Specifies a set of UV coordinates to use for the [i]next[/i] vertex. If every vertex needs to have this information set and you fail to submit it for the first vertex, this information may not be used at all. </description> </method> <method name="set_uv2"> @@ -297,7 +312,7 @@ <argument index="0" name="uv2" type="Vector2"> </argument> <description> - Specifies an optional second set of UV coordinates to use for the next vertex. + Specifies an optional second set of UV coordinates to use for the [i]next[/i] vertex. If every vertex needs to have this information set and you fail to submit it for the first vertex, this information may not be used at all. </description> </method> <method name="set_weights"> @@ -306,7 +321,7 @@ <argument index="0" name="weights" type="PackedFloat32Array"> </argument> <description> - Specifies weight values for next vertex to use. [code]weights[/code] must contain 4 values. + Specifies weight values to use for the [i]next[/i] vertex. [code]weights[/code] must contain 4 values. If every vertex needs to have this information set and you fail to submit it for the first vertex, this information may not be used at all. </description> </method> </methods> diff --git a/doc/classes/SyntaxHighlighter.xml b/doc/classes/SyntaxHighlighter.xml index 2d6e3de02a..642d75fa9b 100644 --- a/doc/classes/SyntaxHighlighter.xml +++ b/doc/classes/SyntaxHighlighter.xml @@ -1,50 +1,83 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="SyntaxHighlighter" inherits="Resource" version="4.0"> <brief_description> + Base Syntax highlighter resource for [TextEdit]. </brief_description> <description> + Base syntax highlighter resource all syntax highlighters extend from, provides syntax highlighting data to [TextEdit]. + The associated [TextEdit] node will call into the [SyntaxHighlighter] on a as needed basis. + [b]Note:[/b] Each Syntax highlighter instance should not be shared across multiple [TextEdit] nodes. </description> <tutorials> </tutorials> <methods> + <method name="_clear_highlighting_cache" qualifiers="virtual"> + <return type="void"> + </return> + <description> + Virtual method which can be overridden to clear any local caches. + </description> + </method> <method name="_get_line_syntax_highlighting" qualifiers="virtual"> <return type="Dictionary"> </return> - <argument index="0" name="p_line" type="int"> + <argument index="0" name="line" type="int"> </argument> <description> + Virtual method which can be overridden to return syntax highlighting data. + See [method get_line_syntax_highlighting] for more details. </description> </method> <method name="_update_cache" qualifiers="virtual"> <return type="void"> </return> <description> + Virtual method which can be overridden to update any local caches. </description> </method> <method name="clear_highlighting_cache"> <return type="void"> </return> <description> + Clears all cached syntax highlighting data. + Then calls overridable method [method _clear_highlighting_cache]. </description> </method> <method name="get_line_syntax_highlighting"> <return type="Dictionary"> </return> - <argument index="0" name="p_line" type="int"> + <argument index="0" name="line" type="int"> </argument> <description> + Returns syntax highlighting data for a single line. If the line is not cached, calls [method _get_line_syntax_highlighting] to calculate the data. + The return [Dictionary] is column number to [Dictionary]. The column number notes the start of a region, the region will end if another region is found, or at the end of the line. The nested [Dictionary] contains the data for that region, currently only the key "color" is supported. + [b]Example return:[/b] + [codeblock] + var color_map = { + 0: { + "color": Color(1, 0, 0) + }, + 5: { + "color": Color(0, 1, 0) + } + } + [/codeblock] + This will color columns 0-4 red, and columns 5-eol in green. </description> </method> <method name="get_text_edit"> <return type="TextEdit"> </return> <description> + Returns the associated [TextEdit] node. </description> </method> <method name="update_cache"> <return type="void"> </return> <description> + Clears then updates the [SyntaxHighlighter] caches. Override [method _update_cache] for a callback. + [b]Note:[/b] This is called automatically when the associated [TextEdit] node, updates its own cache. </description> </method> </methods> diff --git a/doc/classes/TabContainer.xml b/doc/classes/TabContainer.xml index ba687357ec..ddf6b465a4 100644 --- a/doc/classes/TabContainer.xml +++ b/doc/classes/TabContainer.xml @@ -201,15 +201,18 @@ <theme_item name="font_disabled_color" type="Color" default="Color( 0.9, 0.9, 0.9, 0.2 )"> Font color of disabled tabs. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the tab name. + </theme_item> <theme_item name="font_selected_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> Font color of the currently selected tab. </theme_item> - <theme_item name="font_unselected_color" type="Color" default="Color( 0.69, 0.69, 0.69, 1 )"> - Font color of the other, unselected tabs. - </theme_item> <theme_item name="font_size" type="int"> Font size of the tab names. </theme_item> + <theme_item name="font_unselected_color" type="Color" default="Color( 0.69, 0.69, 0.69, 1 )"> + Font color of the other, unselected tabs. + </theme_item> <theme_item name="icon_separation" type="int" default="4"> Space between tab's name and its icon. </theme_item> @@ -225,6 +228,9 @@ <theme_item name="menu_highlight" type="Texture2D"> The icon for the menu button (see [method set_popup]) when it's being hovered with the cursor. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the tab text outline. + </theme_item> <theme_item name="panel" type="StyleBox"> The style for the background fill. </theme_item> diff --git a/doc/classes/Tabs.xml b/doc/classes/Tabs.xml index 1c926ac36d..79fa8896e3 100644 --- a/doc/classes/Tabs.xml +++ b/doc/classes/Tabs.xml @@ -254,6 +254,9 @@ </method> </methods> <members> + <member name="clip_tabs" type="bool" setter="set_clip_tabs" getter="get_clip_tabs" default="true"> + If [code]true[/code], tabs overflowing this node's width will be hidden, displaying two navigation buttons instead. Otherwise, this node's minimum size is updated so that all tabs are visible. + </member> <member name="current_tab" type="int" setter="set_current_tab" getter="get_current_tab" default="0"> Select tab at index [code]tab_idx[/code]. </member> @@ -261,7 +264,7 @@ If [code]true[/code], tabs can be rearranged with mouse drag. </member> <member name="scrolling_enabled" type="bool" setter="set_scrolling_enabled" getter="get_scrolling_enabled" default="true"> - if [code]true[/code], the mouse's scroll wheel cab be used to navigate the scroll view. + if [code]true[/code], the mouse's scroll wheel can be used to navigate the scroll view. </member> <member name="tab_align" type="int" setter="set_tab_align" getter="get_tab_align" enum="Tabs.TabAlign" default="1"> The alignment of all tabs. See [enum TabAlign] for details. @@ -362,15 +365,18 @@ <theme_item name="font_disabled_color" type="Color" default="Color( 0.9, 0.9, 0.9, 0.2 )"> Font color of disabled tabs. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the tab name. + </theme_item> <theme_item name="font_selected_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> Font color of the currently selected tab. </theme_item> - <theme_item name="font_unselected_color" type="Color" default="Color( 0.69, 0.69, 0.69, 1 )"> - Font color of the other, unselected tabs. - </theme_item> <theme_item name="font_size" type="int"> Font size of the tab names. </theme_item> + <theme_item name="font_unselected_color" type="Color" default="Color( 0.69, 0.69, 0.69, 1 )"> + Font color of the other, unselected tabs. + </theme_item> <theme_item name="hseparation" type="int" default="4"> The horizontal separation between the tabs. </theme_item> @@ -380,6 +386,9 @@ <theme_item name="increment_highlight" type="Texture2D"> Icon for the right arrow button that appears when there are too many tabs to fit in the container width. Used when the button is being hovered with the cursor. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the tab text outline. + </theme_item> <theme_item name="panel" type="StyleBox"> </theme_item> <theme_item name="tab_disabled" type="StyleBox"> diff --git a/doc/classes/TextEdit.xml b/doc/classes/TextEdit.xml index af4543374a..088bcd1c3c 100644 --- a/doc/classes/TextEdit.xml +++ b/doc/classes/TextEdit.xml @@ -402,13 +402,24 @@ <description> Perform a search inside the text. Search flags can be specified in the [enum SearchFlags] enum. Returns an empty [code]Dictionary[/code] if no result was found. Otherwise, returns a [code]Dictionary[/code] containing [code]line[/code] and [code]column[/code] entries, e.g: - [codeblock] - var result = search(key, flags, line, column) - if !result.is_empty(): + [codeblocks] + [gdscript] + var result = search("print", SEARCH_WHOLE_WORDS, 0, 0) + if !result.empty(): # Result found. var line_number = result.line var column_number = result.column - [/codeblock] + [/gdscript] + [csharp] + int[] result = Search("print", (uint)TextEdit.SearchFlags.WholeWords, 0, 0); + if (result.Length > 0) + { + // Result found. + int lineNumber = result[(int)TextEdit.SearchResult.Line]; + int columnNumber = result[(int)TextEdit.SearchResult.Column]; + } + [/csharp] + [/codeblocks] </description> </method> <method name="select"> @@ -725,6 +736,7 @@ Set additional options for BiDi override. </member> <member name="syntax_highlighter" type="SyntaxHighlighter" setter="set_syntax_highlighter" getter="get_syntax_highlighter"> + Sets the [SyntaxHighlighter] to use. </member> <member name="text" type="String" setter="set_text" getter="get_text" default=""""> String value of the [TextEdit]. @@ -914,7 +926,7 @@ </constants> <theme_items> <theme_item name="background_color" type="Color" default="Color( 0, 0, 0, 0 )"> - Sets the background [Color] of this [TextEdit]. [member syntax_highlighting] has to be enabled. + Sets the background [Color] of this [TextEdit]. </theme_item> <theme_item name="brace_mismatch_color" type="Color" default="Color( 1, 0.2, 0.2, 1 )"> </theme_item> @@ -953,6 +965,9 @@ <theme_item name="font_color" type="Color" default="Color( 0.88, 0.88, 0.88, 1 )"> Sets the font [Color]. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the [TextEdit]. + </theme_item> <theme_item name="font_readonly_color" type="Color" default="Color( 0.88, 0.88, 0.88, 0.5 )"> </theme_item> <theme_item name="font_selected_color" type="Color" default="Color( 0, 0, 0, 1 )"> @@ -970,6 +985,9 @@ <theme_item name="normal" type="StyleBox"> Sets the [StyleBox] of this [TextEdit]. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="read_only" type="StyleBox"> Sets the [StyleBox] of this [TextEdit] when [member readonly] is enabled. </theme_item> diff --git a/doc/classes/TextParagraph.xml b/doc/classes/TextParagraph.xml index 99eb8b81d4..8df53b8423 100644 --- a/doc/classes/TextParagraph.xml +++ b/doc/classes/TextParagraph.xml @@ -145,7 +145,7 @@ <argument index="4" name="dc_color" type="Color" default="Color( 1, 1, 1, 1 )"> </argument> <description> - Draw outilines of all lines of the text and drop cap into a canvas item at a given position, with [code]color[/code]. [code]pos[/code] specifies the top left corner of the bounding box. + Draw outlines of all lines of the text and drop cap into a canvas item at a given position, with [code]color[/code]. [code]pos[/code] specifies the top left corner of the bounding box. </description> </method> <method name="get_dropcap_lines" qualifiers="const"> @@ -289,6 +289,20 @@ Returns the size of the bounding box of the paragraph. </description> </method> + <method name="get_spacing_bottom" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns extra spacing at the bottom of the line. See [member Font.extra_spacing_bottom]. + </description> + </method> + <method name="get_spacing_top" qualifiers="const"> + <return type="int"> + </return> + <description> + Returns extra spacing at the top of the line. See [member Font.extra_spacing_top]. + </description> + </method> <method name="hit_test" qualifiers="const"> <return type="int"> </return> diff --git a/doc/classes/TextServer.xml b/doc/classes/TextServer.xml index 791646000b..fe63e434c9 100644 --- a/doc/classes/TextServer.xml +++ b/doc/classes/TextServer.xml @@ -9,6 +9,19 @@ <tutorials> </tutorials> <methods> + <method name="create_font_bitmap"> + <return type="RID"> + </return> + <argument index="0" name="height" type="float"> + </argument> + <argument index="1" name="ascent" type="float"> + </argument> + <argument index="2" name="base_size" type="int"> + </argument> + <description> + Creates new, empty bitmap font. To free the resulting font, use [method free_rid] method. + </description> + </method> <method name="create_font_memory"> <return type="RID"> </return> @@ -78,6 +91,51 @@ Draws box displaying character hexadecimal code. Used for replacing missing characters. </description> </method> + <method name="font_bitmap_add_char"> + <return type="void"> + </return> + <argument index="0" name="font" type="RID"> + </argument> + <argument index="1" name="char" type="int"> + </argument> + <argument index="2" name="texture_idx" type="int"> + </argument> + <argument index="3" name="rect" type="Rect2"> + </argument> + <argument index="4" name="align" type="Vector2"> + </argument> + <argument index="5" name="advance" type="float"> + </argument> + <description> + Adds a character to the font, where [code]character[/code] is the Unicode value, [code]texture[/code] is the texture index, [code]rect[/code] is the region in the texture (in pixels!), [code]align[/code] is the (optional) alignment for the character and [code]advance[/code] is the (optional) advance. + </description> + </method> + <method name="font_bitmap_add_kerning_pair"> + <return type="void"> + </return> + <argument index="0" name="font" type="RID"> + </argument> + <argument index="1" name="A" type="int"> + </argument> + <argument index="2" name="B" type="int"> + </argument> + <argument index="3" name="kerning" type="int"> + </argument> + <description> + Adds a kerning pair to the bitmap font as a difference. Kerning pairs are special cases where a typeface advance is determined by the next character. + </description> + </method> + <method name="font_bitmap_add_texture"> + <return type="void"> + </return> + <argument index="0" name="font" type="RID"> + </argument> + <argument index="1" name="texture" type="Texture"> + </argument> + <description> + Adds a texture to the bitmap font. + </description> + </method> <method name="font_draw_glyph" qualifiers="const"> <return type="Vector2"> </return> @@ -200,6 +258,22 @@ Returns advance of the glyph. </description> </method> + <method name="font_get_glyph_contours" qualifiers="const"> + <return type="Dictionary"> + </return> + <argument index="0" name="font" type="RID"> + </argument> + <argument index="1" name="size" type="int"> + </argument> + <argument index="2" name="index" type="int"> + </argument> + <description> + Returns outline contours of the glyph in a Dictionary. + [code]points[/code] - [PackedVector3Array], containing outline points. [code]x[/code] and [code]y[/code] are point coordinates. [code]z[/code] is the type of the point, using the [enum ContourPointTag] values. + [code]contours[/code] - [PackedInt32Array], containing indices the end points of each contour. + [code]orientation[/code] - [bool], contour orientation. If [code]true[/code], clockwise contours must be filled. + </description> + </method> <method name="font_get_glyph_index" qualifiers="const"> <return type="int"> </return> @@ -295,6 +369,24 @@ Returns list of script support overrides. </description> </method> + <method name="font_get_spacing_glyph" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="font" type="RID"> + </argument> + <description> + Returns extra spacing for each glyph in pixels. + </description> + </method> + <method name="font_get_spacing_space" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="font" type="RID"> + </argument> + <description> + Sets extra spacing for each glyph in pixels. + </description> + </method> <method name="font_get_supported_chars" qualifiers="const"> <return type="String"> </return> @@ -490,6 +582,28 @@ Adds override for [method font_is_script_supported]. </description> </method> + <method name="font_set_spacing_glyph"> + <return type="void"> + </return> + <argument index="0" name="font" type="RID"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + Returns extra spacing for the space character in pixels. + </description> + </method> + <method name="font_set_spacing_space"> + <return type="void"> + </return> + <argument index="0" name="font" type="RID"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + Sets extra spacing for the space character in pixels. + </description> + </method> <method name="font_set_variation"> <return type="void"> </return> @@ -655,7 +769,7 @@ <method name="shaped_text_clear"> <return type="void"> </return> - <argument index="0" name="arg0" type="RID"> + <argument index="0" name="rid" type="RID"> </argument> <description> Clears text buffer (removes text and inline objects). @@ -1203,5 +1317,14 @@ <constant name="FEATURE_USE_SUPPORT_DATA" value="128" enum="Feature"> TextServer require external data file for some features. </constant> + <constant name="CONTOUR_CURVE_TAG_ON" value="1" enum="ContourPointTag"> + Contour point is on the curve. + </constant> + <constant name="CONTOUR_CURVE_TAG_OFF_CONIC" value="0" enum="ContourPointTag"> + Contour point isn't on the curve, but serves as a control point for a conic (quadratic) Bézier arc. + </constant> + <constant name="CONTOUR_CURVE_TAG_OFF_CUBIC" value="2" enum="ContourPointTag"> + Contour point isn't on the curve, but serves as a control point for a cubic Bézier arc. + </constant> </constants> </class> diff --git a/doc/classes/Texture2D.xml b/doc/classes/Texture2D.xml index 2270b95c63..c33f32c9e4 100644 --- a/doc/classes/Texture2D.xml +++ b/doc/classes/Texture2D.xml @@ -63,18 +63,18 @@ Draws a part of the texture using a [CanvasItem] with the [RenderingServer] API. </description> </method> - <method name="get_data" qualifiers="const"> - <return type="Image"> + <method name="get_height" qualifiers="const"> + <return type="int"> </return> <description> - Returns an [Image] that is a copy of data from this [Texture2D]. [Image]s can be accessed and manipulated directly. + Returns the texture height. </description> </method> - <method name="get_height" qualifiers="const"> - <return type="int"> + <method name="get_image" qualifiers="const"> + <return type="Image"> </return> <description> - Returns the texture height. + Returns an [Image] that is a copy of data from this [Texture2D]. [Image]s can be accessed and manipulated directly. </description> </method> <method name="get_size" qualifiers="const"> diff --git a/doc/classes/Theme.xml b/doc/classes/Theme.xml index 3f7f22ebcd..3173dddb42 100644 --- a/doc/classes/Theme.xml +++ b/doc/classes/Theme.xml @@ -84,6 +84,19 @@ Clears [StyleBox] at [code]name[/code] if the theme has [code]node_type[/code]. </description> </method> + <method name="clear_theme_item"> + <return type="void"> + </return> + <argument index="0" name="data_type" type="int" enum="Theme.DataType"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Clears the theme item of [code]data_type[/code] at [code]name[/code] if the theme has [code]node_type[/code]. + </description> + </method> <method name="copy_default_theme"> <return type="void"> </return> @@ -194,6 +207,13 @@ Returns all the font sizes as a [PackedStringArray] filled with each font size name, for use in [method get_font_size], if the theme has [code]node_type[/code]. </description> </method> + <method name="get_font_size_type_list" qualifiers="const"> + <return type="PackedStringArray"> + </return> + <description> + Returns all the font size types as a [PackedStringArray] filled with unique type names, for use in [method get_font_size] and/or [method get_font_size_list]. + </description> + </method> <method name="get_font_type_list" qualifiers="const"> <return type="PackedStringArray"> </return> @@ -236,7 +256,8 @@ <argument index="1" name="node_type" type="StringName"> </argument> <description> - Returns the icon [StyleBox] at [code]name[/code] if the theme has [code]node_type[/code]. + Returns the [StyleBox] at [code]name[/code] if the theme has [code]node_type[/code]. + Valid [code]name[/code]s may be found using [method get_stylebox_list]. Valid [code]node_type[/code]s may be found using [method get_stylebox_type_list]. </description> </method> <method name="get_stylebox_list" qualifiers="const"> @@ -246,6 +267,7 @@ </argument> <description> Returns all the [StyleBox]s as a [PackedStringArray] filled with each [StyleBox]'s name, for use in [method get_stylebox], if the theme has [code]node_type[/code]. + Valid [code]node_type[/code]s may be found using [method get_stylebox_type_list]. </description> </method> <method name="get_stylebox_type_list" qualifiers="const"> @@ -255,6 +277,41 @@ Returns all the [StyleBox] types as a [PackedStringArray] filled with unique type names, for use in [method get_stylebox] and/or [method get_stylebox_list]. </description> </method> + <method name="get_theme_item" qualifiers="const"> + <return type="Variant"> + </return> + <argument index="0" name="data_type" type="int" enum="Theme.DataType"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Returns the theme item of [code]data_type[/code] at [code]name[/code] if the theme has [code]node_type[/code]. + Valid [code]name[/code]s may be found using [method get_theme_item_list] or a data type specific method. Valid [code]node_type[/code]s may be found using [method get_theme_item_type_list] or a data type specific method. + </description> + </method> + <method name="get_theme_item_list" qualifiers="const"> + <return type="PackedStringArray"> + </return> + <argument index="0" name="data_type" type="int" enum="Theme.DataType"> + </argument> + <argument index="1" name="node_type" type="String"> + </argument> + <description> + Returns all the theme items of [code]data_type[/code] as a [PackedStringArray] filled with each theme items's name, for use in [method get_theme_item] or a data type specific method, if the theme has [code]node_type[/code]. + Valid [code]node_type[/code]s may be found using [method get_theme_item_type_list] or a data type specific method. + </description> + </method> + <method name="get_theme_item_type_list" qualifiers="const"> + <return type="PackedStringArray"> + </return> + <argument index="0" name="data_type" type="int" enum="Theme.DataType"> + </argument> + <description> + Returns all the theme items of [code]data_type[/code] types as a [PackedStringArray] filled with unique type names, for use in [method get_theme_item], [method get_theme_item_list] or data type specific methods. + </description> + </method> <method name="get_type_list" qualifiers="const"> <return type="PackedStringArray"> </return> @@ -334,6 +391,113 @@ Returns [code]false[/code] if the theme does not have [code]node_type[/code]. </description> </method> + <method name="has_theme_item" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="data_type" type="int" enum="Theme.DataType"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Returns [code]true[/code] if a theme item of [code]data_type[/code] with [code]name[/code] is in [code]node_type[/code]. + Returns [code]false[/code] if the theme does not have [code]node_type[/code]. + </description> + </method> + <method name="rename_color"> + <return type="void"> + </return> + <argument index="0" name="old_name" type="StringName"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Renames the [Color] at [code]old_name[/code] to [code]name[/code] if the theme has [code]node_type[/code]. If [code]name[/code] is already taken, this method fails. + </description> + </method> + <method name="rename_constant"> + <return type="void"> + </return> + <argument index="0" name="old_name" type="StringName"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Renames the constant at [code]old_name[/code] to [code]name[/code] if the theme has [code]node_type[/code]. If [code]name[/code] is already taken, this method fails. + </description> + </method> + <method name="rename_font"> + <return type="void"> + </return> + <argument index="0" name="old_name" type="StringName"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Renames the [Font] at [code]old_name[/code] to [code]name[/code] if the theme has [code]node_type[/code]. If [code]name[/code] is already taken, this method fails. + </description> + </method> + <method name="rename_font_size"> + <return type="void"> + </return> + <argument index="0" name="old_name" type="StringName"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Renames the font size [code]old_name[/code] to [code]name[/code] if the theme has [code]node_type[/code]. If [code]name[/code] is already taken, this method fails. + </description> + </method> + <method name="rename_icon"> + <return type="void"> + </return> + <argument index="0" name="old_name" type="StringName"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Renames the icon at [code]old_name[/code] to [code]name[/code] if the theme has [code]node_type[/code]. If [code]name[/code] is already taken, this method fails. + </description> + </method> + <method name="rename_stylebox"> + <return type="void"> + </return> + <argument index="0" name="old_name" type="StringName"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <description> + Renames [StyleBox] at [code]old_name[/code] to [code]name[/code] if the theme has [code]node_type[/code]. If [code]name[/code] is already taken, this method fails. + </description> + </method> + <method name="rename_theme_item"> + <return type="void"> + </return> + <argument index="0" name="data_type" type="int" enum="Theme.DataType"> + </argument> + <argument index="1" name="old_name" type="StringName"> + </argument> + <argument index="2" name="name" type="StringName"> + </argument> + <argument index="3" name="node_type" type="StringName"> + </argument> + <description> + Renames the theme item of [code]data_type[/code] at [code]old_name[/code] to [code]name[/code] if the theme has [code]node_type[/code]. If [code]name[/code] is already taken, this method fails. + </description> + </method> <method name="set_color"> <return type="void"> </return> @@ -345,7 +509,7 @@ </argument> <description> Sets the theme's [Color] to [code]color[/code] at [code]name[/code] in [code]node_type[/code]. - Does nothing if the theme does not have [code]node_type[/code]. + Creates [code]node_type[/code] if the theme does not have it. </description> </method> <method name="set_constant"> @@ -359,7 +523,7 @@ </argument> <description> Sets the theme's constant to [code]constant[/code] at [code]name[/code] in [code]node_type[/code]. - Does nothing if the theme does not have [code]node_type[/code]. + Creates [code]node_type[/code] if the theme does not have it. </description> </method> <method name="set_font"> @@ -373,7 +537,7 @@ </argument> <description> Sets the theme's [Font] to [code]font[/code] at [code]name[/code] in [code]node_type[/code]. - Does nothing if the theme does not have [code]node_type[/code]. + Creates [code]node_type[/code] if the theme does not have it. </description> </method> <method name="set_font_size"> @@ -387,7 +551,7 @@ </argument> <description> Sets the theme's font size to [code]font_size[/code] at [code]name[/code] in [code]node_type[/code]. - Does nothing if the theme does not have [code]node_type[/code]. + Creates [code]node_type[/code] if the theme does not have it. </description> </method> <method name="set_icon"> @@ -401,7 +565,7 @@ </argument> <description> Sets the theme's icon [Texture2D] to [code]texture[/code] at [code]name[/code] in [code]node_type[/code]. - Does nothing if the theme does not have [code]node_type[/code]. + Creates [code]node_type[/code] if the theme does not have it. </description> </method> <method name="set_stylebox"> @@ -415,7 +579,24 @@ </argument> <description> Sets theme's [StyleBox] to [code]stylebox[/code] at [code]name[/code] in [code]node_type[/code]. - Does nothing if the theme does not have [code]node_type[/code]. + Creates [code]node_type[/code] if the theme does not have it. + </description> + </method> + <method name="set_theme_item"> + <return type="void"> + </return> + <argument index="0" name="data_type" type="int" enum="Theme.DataType"> + </argument> + <argument index="1" name="name" type="StringName"> + </argument> + <argument index="2" name="node_type" type="StringName"> + </argument> + <argument index="3" name="value" type="Variant"> + </argument> + <description> + Sets the theme item of [code]data_type[/code] to [code]value[/code] at [code]name[/code] in [code]node_type[/code]. + Does nothing if the [code]value[/code] type does not match [code]data_type[/code]. + Creates [code]node_type[/code] if the theme does not have it. </description> </method> </methods> @@ -428,5 +609,26 @@ </member> </members> <constants> + <constant name="DATA_TYPE_COLOR" value="0" enum="DataType"> + Theme's [Color] item type. + </constant> + <constant name="DATA_TYPE_CONSTANT" value="1" enum="DataType"> + Theme's constant item type. + </constant> + <constant name="DATA_TYPE_FONT" value="2" enum="DataType"> + Theme's [Font] item type. + </constant> + <constant name="DATA_TYPE_FONT_SIZE" value="3" enum="DataType"> + Theme's font size item type. + </constant> + <constant name="DATA_TYPE_ICON" value="4" enum="DataType"> + Theme's icon [Texture2D] item type. + </constant> + <constant name="DATA_TYPE_STYLEBOX" value="5" enum="DataType"> + Theme's [StyleBox] item type. + </constant> + <constant name="DATA_TYPE_MAX" value="6" enum="DataType"> + Maximum value for the DataType enum. + </constant> </constants> </class> diff --git a/doc/classes/TileMap.xml b/doc/classes/TileMap.xml index 2b918b9db8..205b342ba8 100644 --- a/doc/classes/TileMap.xml +++ b/doc/classes/TileMap.xml @@ -144,7 +144,7 @@ <argument index="1" name="ignore_half_ofs" type="bool" default="false"> </argument> <description> - Returns the global position corresponding to the given tilemap (grid-based) coordinates. + Returns the local position corresponding to the given tilemap (grid-based) coordinates. Optionally, the tilemap's half offset can be ignored. </description> </method> @@ -172,12 +172,22 @@ [b]Note:[/b] Data such as navigation polygons and collision shapes are not immediately updated for performance reasons. If you need these to be immediately updated, you can call [method update_dirty_quadrants]. Overriding this method also overrides it internally, allowing custom logic to be implemented when tiles are placed/removed: - [codeblock] - func set_cell(x, y, tile, flip_x=false, flip_y=false, transpose=false, autotile_coord=Vector2()) + [codeblocks] + [gdscript] + func set_cell(x, y, tile, flip_x=false, flip_y=false, transpose=false, autotile_coord=Vector2()): # Write your custom logic here. # To call the default method: .set_cell(x, y, tile, flip_x, flip_y, transpose, autotile_coord) - [/codeblock] + [/gdscript] + [csharp] + public void SetCell(int x, int y, int tile, bool flipX = false, bool flipY = false, bool transpose = false, Vector2 autotileCoord = new Vector2()) + { + // Write your custom logic here. + // To call the default method: + base.SetCell(x, y, tile, flipX, flipY, transpose, autotileCoord); + } + [/csharp] + [/codeblocks] </description> </method> <method name="set_cellv"> @@ -262,6 +272,9 @@ </method> </methods> <members> + <member name="bake_navigation" type="bool" setter="set_bake_navigation" getter="is_baking_navigation" default="false"> + If [code]true[/code], this TileMap bakes a navigation region. + </member> <member name="cell_clip_uv" type="bool" setter="set_clip_uv" getter="get_clip_uv" default="false"> If [code]true[/code], the cell's UVs will be clipped. </member> diff --git a/doc/classes/Timer.xml b/doc/classes/Timer.xml index ab75e21ce8..807d8033c1 100644 --- a/doc/classes/Timer.xml +++ b/doc/classes/Timer.xml @@ -5,7 +5,7 @@ </brief_description> <description> Counts down a specified interval and emits a signal on reaching 0. Can be set to repeat or "one-shot" mode. - [b]Note:[/b] To create an one-shot timer without instantiating a node, use [method SceneTree.create_timer]. + [b]Note:[/b] To create a one-shot timer without instantiating a node, use [method SceneTree.create_timer]. </description> <tutorials> <link title="2D Dodge The Creeps Demo">https://godotengine.org/asset-library/asset/515</link> @@ -47,8 +47,8 @@ <member name="paused" type="bool" setter="set_paused" getter="is_paused"> If [code]true[/code], the timer is paused and will not process until it is unpaused again, even if [method start] is called. </member> - <member name="process_mode" type="int" setter="set_timer_process_mode" getter="get_timer_process_mode" enum="Timer.TimerProcessMode" default="1"> - Processing mode. See [enum TimerProcessMode]. + <member name="process_callback" type="int" setter="set_timer_process_callback" getter="get_timer_process_callback" enum="Timer.TimerProcessCallback" default="1"> + Processing callback. See [enum TimerProcessCallback]. </member> <member name="time_left" type="float" setter="" getter="get_time_left"> The timer's remaining time in seconds. Returns 0 if the timer is inactive. @@ -66,10 +66,10 @@ </signal> </signals> <constants> - <constant name="TIMER_PROCESS_PHYSICS" value="0" enum="TimerProcessMode"> + <constant name="TIMER_PROCESS_PHYSICS" value="0" enum="TimerProcessCallback"> Update the timer during the physics step at each frame (fixed framerate processing). </constant> - <constant name="TIMER_PROCESS_IDLE" value="1" enum="TimerProcessMode"> + <constant name="TIMER_PROCESS_IDLE" value="1" enum="TimerProcessCallback"> Update the timer during the idle time at each frame. </constant> </constants> diff --git a/doc/classes/TouchScreenButton.xml b/doc/classes/TouchScreenButton.xml index 355804f2a3..bb4c17c531 100644 --- a/doc/classes/TouchScreenButton.xml +++ b/doc/classes/TouchScreenButton.xml @@ -4,7 +4,7 @@ Button for touch screen devices for gameplay use. </brief_description> <description> - TouchScreenButton allows you to create on-screen buttons for touch devices. It's intended for gameplay use, such as a unit you have to touch to move. + TouchScreenButton allows you to create on-screen buttons for touch devices. It's intended for gameplay use, such as a unit you have to touch to move. Unlike [Button], TouchScreenButton supports multitouch out of the box. Several TouchScreenButtons can be pressed at the same time with touch input. This node inherits from [Node2D]. Unlike with [Control] nodes, you cannot set anchors on it. If you want to create menus or user interfaces, you may want to use [Button] nodes instead. To make button nodes react to touch events, you can enable the Emulate Mouse option in the Project Settings. You can configure TouchScreenButton to be visible only on touch devices, helping you develop your game both for desktop and mobile devices. </description> @@ -30,7 +30,8 @@ The button's texture for the normal state. </member> <member name="passby_press" type="bool" setter="set_passby_press" getter="is_passby_press_enabled" default="false"> - If [code]true[/code], pass-by presses are enabled. + If [code]true[/code], the [signal pressed] and [signal released] signals are emitted whenever a pressed finger goes in and out of the button, even if the pressure started outside the active area of the button. + [b]Note:[/b] this is a "pass-by" (not "bypass") press mode. </member> <member name="pressed" type="Texture2D" setter="set_texture_pressed" getter="get_texture_pressed"> The button's texture for the pressed state. @@ -42,7 +43,7 @@ If [code]true[/code], the button's shape is centered in the provided texture. If no texture is used, this property has no effect. </member> <member name="shape_visible" type="bool" setter="set_shape_visible" getter="is_shape_visible" default="true"> - If [code]true[/code], the button's shape is visible. + If [code]true[/code], the button's shape is visible in the editor. </member> <member name="visibility_mode" type="int" setter="set_visibility_mode" getter="get_visibility_mode" enum="TouchScreenButton.VisibilityMode" default="0"> The button's visibility mode. See [enum VisibilityMode] for possible values. diff --git a/doc/classes/Transform.xml b/doc/classes/Transform.xml index cda69f6a64..9d8721e2de 100644 --- a/doc/classes/Transform.xml +++ b/doc/classes/Transform.xml @@ -58,14 +58,14 @@ Constructs a Transform from four [Vector3] values (matrix columns). Each axis corresponds to local basis vectors (some of which may be scaled). </description> </method> - <method name="affine_inverse"> + <method name="affine_inverse" qualifiers="const"> <return type="Transform"> </return> <description> Returns the inverse of the transform, under the assumption that the transformation is composed of rotation, scaling and translation. </description> </method> - <method name="interpolate_with"> + <method name="interpolate_with" qualifiers="const"> <return type="Transform"> </return> <argument index="0" name="xform" type="Transform"> @@ -76,14 +76,14 @@ Interpolates the transform to other Transform by weight amount (on the range of 0.0 to 1.0). </description> </method> - <method name="inverse"> + <method name="inverse" qualifiers="const"> <return type="Transform"> </return> <description> Returns the inverse of the transform, under the assumption that the transformation is composed of rotation and translation (no scaling, use affine_inverse for transforms with scaling). </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="xform" type="Transform"> @@ -92,12 +92,12 @@ Returns [code]true[/code] if this transform and [code]transform[/code] are approximately equal, by calling [code]is_equal_approx[/code] on each component. </description> </method> - <method name="looking_at"> + <method name="looking_at" qualifiers="const"> <return type="Transform"> </return> <argument index="0" name="target" type="Vector3"> </argument> - <argument index="1" name="up" type="Vector3"> + <argument index="1" name="up" type="Vector3" default="Vector3( 0, 1, 0 )"> </argument> <description> Returns a copy of the transform rotated such that its -Z axis points towards the [code]target[/code] position. @@ -153,14 +153,14 @@ <description> </description> </method> - <method name="orthonormalized"> + <method name="orthonormalized" qualifiers="const"> <return type="Transform"> </return> <description> Returns the transform with the basis orthogonal (90 degrees), and normalized axis vectors. </description> </method> - <method name="rotated"> + <method name="rotated" qualifiers="const"> <return type="Transform"> </return> <argument index="0" name="axis" type="Vector3"> @@ -171,7 +171,7 @@ Rotates the transform around the given axis by the given angle (in radians), using matrix multiplication. The axis must be a normalized vector. </description> </method> - <method name="scaled"> + <method name="scaled" qualifiers="const"> <return type="Transform"> </return> <argument index="0" name="scale" type="Vector3"> @@ -180,7 +180,7 @@ Scales basis and origin of the transform by the given scale factor, using matrix multiplication. </description> </method> - <method name="translated"> + <method name="translated" qualifiers="const"> <return type="Transform"> </return> <argument index="0" name="offset" type="Vector3"> diff --git a/doc/classes/Transform2D.xml b/doc/classes/Transform2D.xml index 406774cbfe..6ae7fbcf79 100644 --- a/doc/classes/Transform2D.xml +++ b/doc/classes/Transform2D.xml @@ -54,14 +54,14 @@ Constructs the transform from 3 [Vector2] values representing [member x], [member y], and the [member origin] (the three column vectors). </description> </method> - <method name="affine_inverse"> + <method name="affine_inverse" qualifiers="const"> <return type="Transform2D"> </return> <description> Returns the inverse of the transform, under the assumption that the transformation is composed of rotation, scaling and translation. </description> </method> - <method name="basis_xform"> + <method name="basis_xform" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="v" type="Vector2"> @@ -71,7 +71,7 @@ This method does not account for translation (the origin vector). </description> </method> - <method name="basis_xform_inv"> + <method name="basis_xform_inv" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="v" type="Vector2"> @@ -81,28 +81,28 @@ This method does not account for translation (the origin vector). </description> </method> - <method name="get_origin"> + <method name="get_origin" qualifiers="const"> <return type="Vector2"> </return> <description> Returns the transform's origin (translation). </description> </method> - <method name="get_rotation"> + <method name="get_rotation" qualifiers="const"> <return type="float"> </return> <description> Returns the transform's rotation (in radians). </description> </method> - <method name="get_scale"> + <method name="get_scale" qualifiers="const"> <return type="Vector2"> </return> <description> Returns the scale. </description> </method> - <method name="interpolate_with"> + <method name="interpolate_with" qualifiers="const"> <return type="Transform2D"> </return> <argument index="0" name="xform" type="Transform2D"> @@ -113,14 +113,14 @@ Returns a transform interpolated between this transform and another by a given [code]weight[/code] (on the range of 0.0 to 1.0). </description> </method> - <method name="inverse"> + <method name="inverse" qualifiers="const"> <return type="Transform2D"> </return> <description> Returns the inverse of the transform, under the assumption that the transformation is composed of rotation and translation (no scaling, use [method affine_inverse] for transforms with scaling). </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="xform" type="Transform2D"> @@ -185,14 +185,14 @@ <description> </description> </method> - <method name="orthonormalized"> + <method name="orthonormalized" qualifiers="const"> <return type="Transform2D"> </return> <description> Returns the transform with the basis orthogonal (90 degrees), and normalized axis vectors (scale of 1 or -1). </description> </method> - <method name="rotated"> + <method name="rotated" qualifiers="const"> <return type="Transform2D"> </return> <argument index="0" name="phi" type="float"> @@ -201,7 +201,7 @@ Rotates the transform by the given angle (in radians), using matrix multiplication. </description> </method> - <method name="scaled"> + <method name="scaled" qualifiers="const"> <return type="Transform2D"> </return> <argument index="0" name="scale" type="Vector2"> @@ -210,7 +210,7 @@ Scales the transform by the given scale factor, using matrix multiplication. </description> </method> - <method name="translated"> + <method name="translated" qualifiers="const"> <return type="Transform2D"> </return> <argument index="0" name="offset" type="Vector2"> diff --git a/doc/classes/Tree.xml b/doc/classes/Tree.xml index 406bda412a..a09f1bf470 100644 --- a/doc/classes/Tree.xml +++ b/doc/classes/Tree.xml @@ -6,16 +6,30 @@ <description> This shows a tree of items that can be selected, expanded and collapsed. The tree can have multiple columns with custom controls like text editing, buttons and popups. It can be useful for structured displays and interactions. Trees are built via code, using [TreeItem] objects to create the structure. They have a single root but multiple roots can be simulated if a dummy hidden root is added. - [codeblock] + [codeblocks] + [gdscript] func _ready(): var tree = Tree.new() var root = tree.create_item() - tree.set_hide_root(true) + tree.hide_root = true var child1 = tree.create_item(root) var child2 = tree.create_item(root) var subchild1 = tree.create_item(child1) subchild1.set_text(0, "Subchild1") - [/codeblock] + [/gdscript] + [csharp] + public override void _Ready() + { + var tree = new Tree(); + TreeItem root = tree.CreateItem(); + tree.HideRoot = true; + TreeItem child1 = tree.CreateItem(root); + TreeItem child2 = tree.CreateItem(root); + TreeItem subchild1 = tree.CreateItem(child1); + subchild1.SetText(0, "Subchild1"); + } + [/csharp] + [/codeblocks] To iterate over all the [TreeItem] objects in a [Tree] object, use [method TreeItem.get_next] and [method TreeItem.get_children] after getting the root through [method get_root]. You can use [method Object.free] on a [TreeItem] to remove it from the [Tree]. </description> <tutorials> @@ -57,6 +71,13 @@ The new item will be the [code]idx[/code]th child of parent, or it will be the last child if there are not enough siblings. </description> </method> + <method name="edit_selected"> + <return type="bool"> + </return> + <description> + Edits the selected tree item as if it was clicked. The item must be set editable with [method TreeItem.set_editable]. Returns [code]true[/code] if the item could be edited. Fails if no item is selected. + </description> + </method> <method name="ensure_cursor_is_visible"> <return type="void"> </return> @@ -145,13 +166,26 @@ </return> <description> Returns the currently edited item. Can be used with [signal item_edited] to get the item that was modified. - [codeblock] + [codeblocks] + [gdscript] func _ready(): $Tree.item_edited.connect(on_Tree_item_edited) func on_Tree_item_edited(): print($Tree.get_edited()) # This item just got edited (e.g. checked). - [/codeblock] + [/gdscript] + [csharp] + public override void _Ready() + { + GetNode<Tree>("Tree").ItemEdited += OnTreeItemEdited; + } + + public void OnTreeItemEdited() + { + GD.Print(GetNode<Tree>("Tree").GetEdited()); // This item just got edited (e.g. checked). + } + [/csharp] + [/codeblocks] </description> </method> <method name="get_edited_column" qualifiers="const"> @@ -230,6 +264,14 @@ To tell whether a column of an item is selected, use [method TreeItem.is_selected]. </description> </method> + <method name="scroll_to_item"> + <return type="void"> + </return> + <argument index="0" name="item" type="Object"> + </argument> + <description> + </description> + </method> <method name="set_column_expand"> <return type="void"> </return> @@ -524,6 +566,9 @@ <theme_item name="font_color" type="Color" default="Color( 0.69, 0.69, 0.69, 1 )"> Default text [Color] of the item. </theme_item> + <theme_item name="font_outline_color" type="Color" default="Color( 1, 1, 1, 1 )"> + The tint of text outline of the item. + </theme_item> <theme_item name="font_selected_color" type="Color" default="Color( 1, 1, 1, 1 )"> Text [Color] used when the item is selected. </theme_item> @@ -539,6 +584,9 @@ <theme_item name="item_margin" type="int" default="12"> The horizontal margin at the start of an item. This is used when folding is enabled for the item. </theme_item> + <theme_item name="outline_size" type="int" default="0"> + The size of the text outline. + </theme_item> <theme_item name="relationship_line_color" type="Color" default="Color( 0.27, 0.27, 0.27, 1 )"> [Color] of the relationship lines. </theme_item> diff --git a/doc/classes/TreeItem.xml b/doc/classes/TreeItem.xml index e97c1e580c..add23c2ce6 100644 --- a/doc/classes/TreeItem.xml +++ b/doc/classes/TreeItem.xml @@ -208,6 +208,7 @@ <argument index="0" name="column" type="int"> </argument> <description> + Returns the metadata value that was set for the given column using [method set_metadata]. </description> </method> <method name="get_next"> @@ -268,6 +269,7 @@ <argument index="0" name="column" type="int"> </argument> <description> + Returns the value of a [constant CELL_MODE_RANGE] column. </description> </method> <method name="get_range_config"> @@ -276,6 +278,7 @@ <argument index="0" name="column" type="int"> </argument> <description> + Returns a dictionary containing the range parameters for a given column. The keys are "min", "max", "step", and "expr". </description> </method> <method name="get_structured_text_bidi_override" qualifiers="const"> @@ -300,6 +303,7 @@ <argument index="0" name="column" type="int"> </argument> <description> + Gets the suffix string shown after the column value. </description> </method> <method name="get_text" qualifiers="const"> @@ -606,6 +610,7 @@ <argument index="1" name="meta" type="Variant"> </argument> <description> + Sets the metadata value for the given column, which can be retrieved later using [method get_metadata]. This can be used, for example, to store a reference to the original data. </description> </method> <method name="set_opentype_feature"> @@ -629,6 +634,7 @@ <argument index="1" name="value" type="float"> </argument> <description> + Sets the value of a [constant CELL_MODE_RANGE] column. </description> </method> <method name="set_range_config"> @@ -645,6 +651,8 @@ <argument index="4" name="expr" type="bool" default="false"> </argument> <description> + Sets the range of accepted values for a column. The column must be in the [constant CELL_MODE_RANGE] mode. + If [code]expr[/code] is [code]true[/code], the edit mode slider will use an exponential scale as with [member Range.exp_edit]. </description> </method> <method name="set_selectable"> @@ -686,6 +694,7 @@ <argument index="1" name="text" type="String"> </argument> <description> + Sets a string to be shown after a column's value (for example, a unit abbreviation). </description> </method> <method name="set_text"> @@ -696,6 +705,7 @@ <argument index="1" name="text" type="String"> </argument> <description> + Sets the given column's text value. </description> </method> <method name="set_text_align"> @@ -731,6 +741,12 @@ Sets the given column's tooltip text. </description> </method> + <method name="uncollapse_tree"> + <return type="void"> + </return> + <description> + </description> + </method> </methods> <members> <member name="collapsed" type="bool" setter="set_collapsed" getter="is_collapsed"> @@ -748,7 +764,7 @@ Cell contains a string. </constant> <constant name="CELL_MODE_CHECK" value="1" enum="TreeCellMode"> - Cell can be checked. + Cell contains a checkbox. </constant> <constant name="CELL_MODE_RANGE" value="2" enum="TreeCellMode"> Cell contains a range. diff --git a/doc/classes/Tween.xml b/doc/classes/Tween.xml index 56ccaaf383..00cca40093 100644 --- a/doc/classes/Tween.xml +++ b/doc/classes/Tween.xml @@ -7,14 +7,23 @@ Tweens are useful for animations requiring a numerical property to be interpolated over a range of values. The name [i]tween[/i] comes from [i]in-betweening[/i], an animation technique where you specify [i]keyframes[/i] and the computer interpolates the frames that appear between them. [Tween] is more suited than [AnimationPlayer] for animations where you don't know the final values in advance. For example, interpolating a dynamically-chosen camera zoom value is best done with a [Tween] node; it would be difficult to do the same thing with an [AnimationPlayer] node. Here is a brief usage example that makes a 2D node move smoothly between two positions: - [codeblock] + [codeblocks] + [gdscript] var tween = get_node("Tween") tween.interpolate_property($Node2D, "position", Vector2(0, 0), Vector2(100, 100), 1, Tween.TRANS_LINEAR, Tween.EASE_IN_OUT) tween.start() - [/codeblock] - Many methods require a property name, such as [code]"position"[/code] above. You can find the correct property name by hovering over the property in the Inspector. You can also provide the components of a property directly by using [code]"property:component"[/code] (eg. [code]position:x[/code]), where it would only apply to that particular component. + [/gdscript] + [csharp] + var tween = GetNode<Tween>("Tween"); + tween.InterpolateProperty(GetNode<Node2D>("Node2D"), "position", + new Vector2(0, 0), new Vector2(100, 100), 1, + Tween.TransitionType.Linear, Tween.EaseType.InOut); + tween.Start(); + [/csharp] + [/codeblocks] + Many methods require a property name, such as [code]"position"[/code] above. You can find the correct property name by hovering over the property in the Inspector. You can also provide the components of a property directly by using [code]"property:component"[/code] (e.g. [code]position:x[/code]), where it would only apply to that particular component. Many of the methods accept [code]trans_type[/code] and [code]ease_type[/code]. The first accepts an [enum TransitionType] constant, and refers to the way the timing of the animation is handled (see [url=https://easings.net/]easings.net[/url] for some examples). The second accepts an [enum EaseType] constant, and controls where the [code]trans_type[/code] is applied to the interpolation (in the beginning, the end, or both). If you don't know which transition and easing to pick, you can try different [enum TransitionType] constants with [constant EASE_IN_OUT], and use the one that looks best. [url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/tween_cheatsheet.png]Tween easing and transition types cheatsheet[/url] </description> diff --git a/doc/classes/UDPServer.xml b/doc/classes/UDPServer.xml index aabfed85f0..0fc00f67f8 100644 --- a/doc/classes/UDPServer.xml +++ b/doc/classes/UDPServer.xml @@ -7,8 +7,9 @@ A simple server that opens a UDP socket and returns connected [PacketPeerUDP] upon receiving new packets. See also [method PacketPeerUDP.connect_to_host]. After starting the server ([method listen]), you will need to [method poll] it at regular intervals (e.g. inside [method Node._process]) for it to process new packets, delivering them to the appropriate [PacketPeerUDP], and taking new connections. Below a small example of how it can be used: - [codeblock] - # server.gd + [codeblocks] + [gdscript] + class_name Server extends Node var server := UDPServer.new() @@ -21,20 +22,57 @@ server.poll() # Important! if server.is_connection_available(): var peer : PacketPeerUDP = server.take_connection() - var pkt = peer.get_packet() + var packet = peer.get_packet() print("Accepted peer: %s:%s" % [peer.get_packet_ip(), peer.get_packet_port()]) - print("Received data: %s" % [pkt.get_string_from_utf8()]) + print("Received data: %s" % [packet.get_string_from_utf8()]) # Reply so it knows we received the message. - peer.put_packet(pkt) + peer.put_packet(packet) # Keep a reference so we can keep contacting the remote peer. peers.append(peer) for i in range(0, peers.size()): pass # Do something with the connected peers. + [/gdscript] + [csharp] + using Godot; + using System; + using System.Collections.Generic; - [/codeblock] - [codeblock] - # client.gd + public class Server : Node + { + public UDPServer Server = new UDPServer(); + public List<PacketPeerUDP> Peers = new List<PacketPeerUDP>(); + + public override void _Ready() + { + Server.Listen(4242); + } + + public override void _Process(float delta) + { + Server.Poll(); // Important! + if (Server.IsConnectionAvailable()) + { + PacketPeerUDP peer = Server.TakeConnection(); + byte[] packet = peer.GetPacket(); + GD.Print($"Accepted Peer: {peer.GetPacketIp()}:{peer.GetPacketPort()}"); + GD.Print($"Received Data: {packet.GetStringFromUTF8()}"); + // Reply so it knows we received the message. + peer.PutPacket(packet); + // Keep a reference so we can keep contacting the remote peer. + Peers.Add(peer); + } + foreach (var peer in Peers) + { + // Do something with the peers. + } + } + } + [/csharp] + [/codeblocks] + [codeblocks] + [gdscript] + class_name Client extends Node var udp := PacketPeerUDP.new() @@ -50,7 +88,37 @@ if udp.get_available_packet_count() > 0: print("Connected: %s" % udp.get_packet().get_string_from_utf8()) connected = true - [/codeblock] + [/gdscript] + [csharp] + using Godot; + using System; + + public class Client : Node + { + public PacketPeerUDP Udp = new PacketPeerUDP(); + public bool Connected = false; + + public override void _Ready() + { + Udp.ConnectToHost("127.0.0.1", 4242); + } + + public override void _Process(float delta) + { + if (!Connected) + { + // Try to contact server + Udp.PutPacket("The Answer Is..42!".ToUTF8()); + } + if (Udp.GetAvailablePacketCount() > 0) + { + GD.Print($"Connected: {Udp.GetPacket().GetStringFromUTF8()}"); + Connected = true; + } + } + } + [/csharp] + [/codeblocks] </description> <tutorials> </tutorials> diff --git a/doc/classes/UndoRedo.xml b/doc/classes/UndoRedo.xml index 0e4a76a1a9..aba6183124 100644 --- a/doc/classes/UndoRedo.xml +++ b/doc/classes/UndoRedo.xml @@ -7,7 +7,8 @@ Helper to manage undo/redo operations in the editor or custom tools. It works by registering methods and property changes inside "actions". Common behavior is to create an action, then add do/undo calls to functions or property changes, then committing the action. Here's an example on how to add an action to the Godot editor's own [UndoRedo], from a plugin: - [codeblock] + [codeblocks] + [gdscript] var undo_redo = get_undo_redo() # Method of EditorPlugin. func do_something(): @@ -24,7 +25,37 @@ undo_redo.add_do_property(node, "position", Vector2(100,100)) undo_redo.add_undo_property(node, "position", node.position) undo_redo.commit_action() - [/codeblock] + [/gdscript] + [csharp] + public UndoRedo UndoRedo; + + public override void _Ready() + { + UndoRedo = GetUndoRedo(); // Method of EditorPlugin. + } + + public void DoSomething() + { + // Put your code here. + } + + public void UndoSomething() + { + // Put here the code that reverts what's done by "DoSomething()". + } + + private void OnMyButtonPressed() + { + var node = GetNode<Node2D>("MyNode2D"); + UndoRedo.CreateAction("Move the node"); + UndoRedo.AddDoMethod(this, nameof(DoSomething)); + UndoRedo.AddUndoMethod(this, nameof(UndoSomething)); + UndoRedo.AddDoProperty(node, "position", new Vector2(100, 100)); + UndoRedo.AddUndoProperty(node, "position", node.Position); + UndoRedo.CommitAction(); + } + [/csharp] + [/codeblocks] [method create_action], [method add_do_method], [method add_undo_method], [method add_do_property], [method add_undo_property], and [method commit_action] should be called one after the other, like in the example. Not doing so could lead to crashes. If you don't need to register a method, you can leave [method add_do_method] and [method add_undo_method] out; the same goes for properties. You can also register more than one method/property. </description> @@ -131,7 +162,7 @@ <method name="get_action_name"> <return type="String"> </return> - <argument index="0" name="arg0" type="int"> + <argument index="0" name="id" type="int"> </argument> <description> Gets the action name from its index. @@ -155,7 +186,7 @@ <return type="int"> </return> <description> - Return how many element are in the history. + Return how many elements are in the history. </description> </method> <method name="get_version" qualifiers="const"> diff --git a/doc/classes/Vector2.xml b/doc/classes/Vector2.xml index 4159a38d96..b979425b85 100644 --- a/doc/classes/Vector2.xml +++ b/doc/classes/Vector2.xml @@ -53,14 +53,14 @@ Constructs a new [Vector2] from the given [code]x[/code] and [code]y[/code]. </description> </method> - <method name="abs"> + <method name="abs" qualifiers="const"> <return type="Vector2"> </return> <description> Returns a new vector with all components in absolute values (i.e. positive). </description> </method> - <method name="angle"> + <method name="angle" qualifiers="const"> <return type="float"> </return> <description> @@ -69,7 +69,7 @@ Equivalent to the result of [method @GlobalScope.atan2] when called with the vector's [member y] and [member x] as parameters: [code]atan2(y, x)[/code]. </description> </method> - <method name="angle_to"> + <method name="angle_to" qualifiers="const"> <return type="float"> </return> <argument index="0" name="to" type="Vector2"> @@ -78,7 +78,7 @@ Returns the angle to the given vector, in radians. </description> </method> - <method name="angle_to_point"> + <method name="angle_to_point" qualifiers="const"> <return type="float"> </return> <argument index="0" name="to" type="Vector2"> @@ -87,14 +87,14 @@ Returns the angle between the line connecting the two points and the X axis, in radians. </description> </method> - <method name="aspect"> + <method name="aspect" qualifiers="const"> <return type="float"> </return> <description> Returns the aspect ratio of this vector, the ratio of [member x] to [member y]. </description> </method> - <method name="bounce"> + <method name="bounce" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="n" type="Vector2"> @@ -103,14 +103,14 @@ Returns the vector "bounced off" from a plane defined by the given normal. </description> </method> - <method name="ceil"> + <method name="ceil" qualifiers="const"> <return type="Vector2"> </return> <description> Returns the vector with all components rounded up (towards positive infinity). </description> </method> - <method name="clamped"> + <method name="clamped" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="length" type="float"> @@ -119,7 +119,7 @@ Returns the vector with a maximum length by limiting its length to [code]length[/code]. </description> </method> - <method name="cross"> + <method name="cross" qualifiers="const"> <return type="float"> </return> <argument index="0" name="with" type="Vector2"> @@ -128,7 +128,7 @@ Returns the cross product of this vector and [code]with[/code]. </description> </method> - <method name="cubic_interpolate"> + <method name="cubic_interpolate" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="b" type="Vector2"> @@ -143,7 +143,7 @@ Cubically interpolates between this vector and [code]b[/code] using [code]pre_a[/code] and [code]post_b[/code] as handles, and returns the result at position [code]weight[/code]. [code]weight[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. </description> </method> - <method name="direction_to"> + <method name="direction_to" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="b" type="Vector2"> @@ -152,7 +152,7 @@ Returns the normalized vector pointing from this vector to [code]b[/code]. This is equivalent to using [code](b - a).normalized()[/code]. </description> </method> - <method name="distance_squared_to"> + <method name="distance_squared_to" qualifiers="const"> <return type="float"> </return> <argument index="0" name="to" type="Vector2"> @@ -162,7 +162,7 @@ This method runs faster than [method distance_to], so prefer it if you need to compare vectors or need the squared distance for some formula. </description> </method> - <method name="distance_to"> + <method name="distance_to" qualifiers="const"> <return type="float"> </return> <argument index="0" name="to" type="Vector2"> @@ -171,7 +171,7 @@ Returns the distance between this vector and [code]to[/code]. </description> </method> - <method name="dot"> + <method name="dot" qualifiers="const"> <return type="float"> </return> <argument index="0" name="with" type="Vector2"> @@ -183,14 +183,14 @@ [b]Note:[/b] [code]a.dot(b)[/code] is equivalent to [code]b.dot(a)[/code]. </description> </method> - <method name="floor"> + <method name="floor" qualifiers="const"> <return type="Vector2"> </return> <description> Returns the vector with all components rounded down (towards negative infinity). </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="to" type="Vector2"> @@ -199,21 +199,21 @@ Returns [code]true[/code] if this vector and [code]v[/code] are approximately equal, by running [method @GlobalScope.is_equal_approx] on each component. </description> </method> - <method name="is_normalized"> + <method name="is_normalized" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the vector is normalized, [code]false[/code] otherwise. </description> </method> - <method name="length"> + <method name="length" qualifiers="const"> <return type="float"> </return> <description> Returns the length (magnitude) of this vector. </description> </method> - <method name="length_squared"> + <method name="length_squared" qualifiers="const"> <return type="float"> </return> <description> @@ -221,7 +221,7 @@ This method runs faster than [method length], so prefer it if you need to compare vectors or need the squared distance for some formula. </description> </method> - <method name="lerp"> + <method name="lerp" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="to" type="Vector2"> @@ -232,7 +232,7 @@ Returns the result of the linear interpolation between this vector and [code]b[/code] by amount [code]t[/code]. [code]t[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. </description> </method> - <method name="move_toward"> + <method name="move_toward" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="to" type="Vector2"> @@ -243,7 +243,7 @@ Moves the vector toward [code]to[/code] by the fixed [code]delta[/code] amount. </description> </method> - <method name="normalized"> + <method name="normalized" qualifiers="const"> <return type="Vector2"> </return> <description> @@ -390,14 +390,14 @@ <description> </description> </method> - <method name="orthogonal"> + <method name="orthogonal" qualifiers="const"> <return type="Vector2"> </return> <description> Returns a perpendicular vector rotated 90 degrees counter-clockwise compared to the original, with the same length. </description> </method> - <method name="posmod"> + <method name="posmod" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="mod" type="float"> @@ -406,7 +406,7 @@ Returns a vector composed of the [method @GlobalScope.fposmod] of this vector's components and [code]mod[/code]. </description> </method> - <method name="posmodv"> + <method name="posmodv" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="modv" type="Vector2"> @@ -415,7 +415,7 @@ Returns a vector composed of the [method @GlobalScope.fposmod] of this vector's components and [code]modv[/code]'s components. </description> </method> - <method name="project"> + <method name="project" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="b" type="Vector2"> @@ -424,7 +424,7 @@ Returns the vector projected onto the vector [code]b[/code]. </description> </method> - <method name="reflect"> + <method name="reflect" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="n" type="Vector2"> @@ -433,7 +433,7 @@ Returns the vector reflected from a plane defined by the given normal. </description> </method> - <method name="rotated"> + <method name="rotated" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="phi" type="float"> @@ -442,21 +442,21 @@ Returns the vector rotated by [code]phi[/code] radians. See also [method @GlobalScope.deg2rad]. </description> </method> - <method name="round"> + <method name="round" qualifiers="const"> <return type="Vector2"> </return> <description> Returns the vector with all components rounded to the nearest integer, with halfway cases rounded away from zero. </description> </method> - <method name="sign"> + <method name="sign" qualifiers="const"> <return type="Vector2"> </return> <description> Returns the vector with each component set to one or negative one, depending on the signs of the components, or zero if the component is zero, by calling [method @GlobalScope.sign] on each component. </description> </method> - <method name="slerp"> + <method name="slerp" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="to" type="Vector2"> @@ -468,7 +468,7 @@ [b]Note:[/b] Both vectors must be normalized. </description> </method> - <method name="slide"> + <method name="slide" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="n" type="Vector2"> @@ -477,7 +477,7 @@ Returns this vector slid along a plane defined by the given normal. </description> </method> - <method name="snapped"> + <method name="snapped" qualifiers="const"> <return type="Vector2"> </return> <argument index="0" name="step" type="Vector2"> diff --git a/doc/classes/Vector2i.xml b/doc/classes/Vector2i.xml index a4ea5c2742..b38b968ba3 100644 --- a/doc/classes/Vector2i.xml +++ b/doc/classes/Vector2i.xml @@ -50,14 +50,14 @@ Constructs a new [Vector2i] from the given [code]x[/code] and [code]y[/code]. </description> </method> - <method name="abs"> + <method name="abs" qualifiers="const"> <return type="Vector2i"> </return> <description> Returns a new vector with all components in absolute values (i.e. positive). </description> </method> - <method name="aspect"> + <method name="aspect" qualifiers="const"> <return type="float"> </return> <description> @@ -212,7 +212,7 @@ <description> </description> </method> - <method name="sign"> + <method name="sign" qualifiers="const"> <return type="Vector2i"> </return> <description> diff --git a/doc/classes/Vector3.xml b/doc/classes/Vector3.xml index 2d129a2c86..bd568e01ec 100644 --- a/doc/classes/Vector3.xml +++ b/doc/classes/Vector3.xml @@ -55,23 +55,23 @@ Returns a [Vector3] with the given components. </description> </method> - <method name="abs"> + <method name="abs" qualifiers="const"> <return type="Vector3"> </return> <description> Returns a new vector with all components in absolute values (i.e. positive). </description> </method> - <method name="angle_to"> + <method name="angle_to" qualifiers="const"> <return type="float"> </return> <argument index="0" name="to" type="Vector3"> </argument> <description> - Returns the minimum angle to the given vector, in radians. + Returns the unsigned minimum angle to the given vector, in radians. </description> </method> - <method name="bounce"> + <method name="bounce" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="n" type="Vector3"> @@ -80,14 +80,14 @@ Returns the vector "bounced off" from a plane defined by the given normal. </description> </method> - <method name="ceil"> + <method name="ceil" qualifiers="const"> <return type="Vector3"> </return> <description> Returns a new vector with all components rounded up (towards positive infinity). </description> </method> - <method name="cross"> + <method name="cross" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="with" type="Vector3"> @@ -96,7 +96,7 @@ Returns the cross product of this vector and [code]b[/code]. </description> </method> - <method name="cubic_interpolate"> + <method name="cubic_interpolate" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="b" type="Vector3"> @@ -111,7 +111,7 @@ Performs a cubic interpolation between vectors [code]pre_a[/code], [code]a[/code], [code]b[/code], [code]post_b[/code] ([code]a[/code] is current), by the given amount [code]weight[/code]. [code]weight[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. </description> </method> - <method name="direction_to"> + <method name="direction_to" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="b" type="Vector3"> @@ -120,7 +120,7 @@ Returns the normalized vector pointing from this vector to [code]b[/code]. This is equivalent to using [code](b - a).normalized()[/code]. </description> </method> - <method name="distance_squared_to"> + <method name="distance_squared_to" qualifiers="const"> <return type="float"> </return> <argument index="0" name="b" type="Vector3"> @@ -130,7 +130,7 @@ This method runs faster than [method distance_to], so prefer it if you need to compare vectors or need the squared distance for some formula. </description> </method> - <method name="distance_to"> + <method name="distance_to" qualifiers="const"> <return type="float"> </return> <argument index="0" name="b" type="Vector3"> @@ -139,7 +139,7 @@ Returns the distance between this vector and [code]b[/code]. </description> </method> - <method name="dot"> + <method name="dot" qualifiers="const"> <return type="float"> </return> <argument index="0" name="with" type="Vector3"> @@ -151,21 +151,21 @@ [b]Note:[/b] [code]a.dot(b)[/code] is equivalent to [code]b.dot(a)[/code]. </description> </method> - <method name="floor"> + <method name="floor" qualifiers="const"> <return type="Vector3"> </return> <description> Returns a new vector with all components rounded down (towards negative infinity). </description> </method> - <method name="inverse"> + <method name="inverse" qualifiers="const"> <return type="Vector3"> </return> <description> Returns the inverse of the vector. This is the same as [code]Vector3( 1.0 / v.x, 1.0 / v.y, 1.0 / v.z )[/code]. </description> </method> - <method name="is_equal_approx"> + <method name="is_equal_approx" qualifiers="const"> <return type="bool"> </return> <argument index="0" name="to" type="Vector3"> @@ -174,21 +174,21 @@ Returns [code]true[/code] if this vector and [code]v[/code] are approximately equal, by running [method @GlobalScope.is_equal_approx] on each component. </description> </method> - <method name="is_normalized"> + <method name="is_normalized" qualifiers="const"> <return type="bool"> </return> <description> Returns [code]true[/code] if the vector is normalized, [code]false[/code] otherwise. </description> </method> - <method name="length"> + <method name="length" qualifiers="const"> <return type="float"> </return> <description> Returns the length (magnitude) of this vector. </description> </method> - <method name="length_squared"> + <method name="length_squared" qualifiers="const"> <return type="float"> </return> <description> @@ -196,7 +196,7 @@ This method runs faster than [method length], so prefer it if you need to compare vectors or need the squared distance for some formula. </description> </method> - <method name="lerp"> + <method name="lerp" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="to" type="Vector3"> @@ -207,21 +207,21 @@ Returns the result of the linear interpolation between this vector and [code]b[/code] by amount [code]weight[/code]. [code]weight[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. </description> </method> - <method name="max_axis"> + <method name="max_axis" qualifiers="const"> <return type="int"> </return> <description> Returns the axis of the vector's largest value. See [code]AXIS_*[/code] constants. If all components are equal, this method returns [constant AXIS_X]. </description> </method> - <method name="min_axis"> + <method name="min_axis" qualifiers="const"> <return type="int"> </return> <description> Returns the axis of the vector's smallest value. See [code]AXIS_*[/code] constants. If all components are equal, this method returns [constant AXIS_Z]. </description> </method> - <method name="move_toward"> + <method name="move_toward" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="to" type="Vector3"> @@ -232,7 +232,7 @@ Moves this vector toward [code]to[/code] by the fixed [code]delta[/code] amount. </description> </method> - <method name="normalized"> + <method name="normalized" qualifiers="const"> <return type="Vector3"> </return> <description> @@ -395,7 +395,7 @@ <description> </description> </method> - <method name="outer"> + <method name="outer" qualifiers="const"> <return type="Basis"> </return> <argument index="0" name="with" type="Vector3"> @@ -404,7 +404,7 @@ Returns the outer product with [code]b[/code]. </description> </method> - <method name="posmod"> + <method name="posmod" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="mod" type="float"> @@ -413,7 +413,7 @@ Returns a vector composed of the [method @GlobalScope.fposmod] of this vector's components and [code]mod[/code]. </description> </method> - <method name="posmodv"> + <method name="posmodv" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="modv" type="Vector3"> @@ -422,7 +422,7 @@ Returns a vector composed of the [method @GlobalScope.fposmod] of this vector's components and [code]modv[/code]'s components. </description> </method> - <method name="project"> + <method name="project" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="b" type="Vector3"> @@ -431,7 +431,7 @@ Returns this vector projected onto another vector [code]b[/code]. </description> </method> - <method name="reflect"> + <method name="reflect" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="n" type="Vector3"> @@ -440,7 +440,7 @@ Returns this vector reflected from a plane defined by the given normal. </description> </method> - <method name="rotated"> + <method name="rotated" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="by_axis" type="Vector3"> @@ -451,21 +451,32 @@ Rotates this vector around a given axis by [code]phi[/code] radians. The axis must be a normalized vector. </description> </method> - <method name="round"> + <method name="round" qualifiers="const"> <return type="Vector3"> </return> <description> Returns this vector with all components rounded to the nearest integer, with halfway cases rounded away from zero. </description> </method> - <method name="sign"> + <method name="sign" qualifiers="const"> <return type="Vector3"> </return> <description> Returns a vector with each component set to one or negative one, depending on the signs of this vector's components, or zero if the component is zero, by calling [method @GlobalScope.sign] on each component. </description> </method> - <method name="slerp"> + <method name="signed_angle_to" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="to" type="Vector3"> + </argument> + <argument index="1" name="axis" type="Vector3"> + </argument> + <description> + Returns the signed angle to the given vector, in radians. The sign of the angle is positive in a counter-clockwise direction and negative in a clockwise direction when viewed from the side specified by the [code]axis[/code]. + </description> + </method> + <method name="slerp" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="to" type="Vector3"> @@ -477,7 +488,7 @@ [b]Note:[/b] Both vectors must be normalized. </description> </method> - <method name="slide"> + <method name="slide" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="n" type="Vector3"> @@ -486,7 +497,7 @@ Returns this vector slid along a plane defined by the given normal. </description> </method> - <method name="snapped"> + <method name="snapped" qualifiers="const"> <return type="Vector3"> </return> <argument index="0" name="step" type="Vector3"> @@ -495,7 +506,7 @@ Returns this vector with each component snapped to the nearest multiple of [code]step[/code]. This can also be used to round to an arbitrary number of decimals. </description> </method> - <method name="to_diagonal_matrix"> + <method name="to_diagonal_matrix" qualifiers="const"> <return type="Basis"> </return> <description> diff --git a/doc/classes/Vector3i.xml b/doc/classes/Vector3i.xml index a1ae2aceab..ea5945f5b7 100644 --- a/doc/classes/Vector3i.xml +++ b/doc/classes/Vector3i.xml @@ -52,20 +52,20 @@ Returns a [Vector3i] with the given components. </description> </method> - <method name="abs"> + <method name="abs" qualifiers="const"> <return type="Vector3i"> </return> <description> </description> </method> - <method name="max_axis"> + <method name="max_axis" qualifiers="const"> <return type="int"> </return> <description> Returns the axis of the vector's largest value. See [code]AXIS_*[/code] constants. If all components are equal, this method returns [constant AXIS_X]. </description> </method> - <method name="min_axis"> + <method name="min_axis" qualifiers="const"> <return type="int"> </return> <description> @@ -220,7 +220,7 @@ <description> </description> </method> - <method name="sign"> + <method name="sign" qualifiers="const"> <return type="Vector3i"> </return> <description> diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index e66b8353a8..471d21374d 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -80,9 +80,9 @@ </return> <description> Returns the viewport's texture. - [b]Note:[/b] Due to the way OpenGL works, the resulting [ViewportTexture] is flipped vertically. You can use [method Image.flip_y] on the result of [method Texture2D.get_data] to flip it back, for example: + [b]Note:[/b] Due to the way OpenGL works, the resulting [ViewportTexture] is flipped vertically. You can use [method Image.flip_y] on the result of [method Texture2D.get_image] to flip it back, for example: [codeblock] - var img = get_viewport().get_texture().get_data() + var img = get_viewport().get_texture().get_image() img.flip_y() [/codeblock] </description> @@ -240,6 +240,8 @@ </member> <member name="sdf_scale" type="int" setter="set_sdf_scale" getter="get_sdf_scale" enum="Viewport.SDFScale" default="1"> </member> + <member name="shadow_atlas_16_bits" type="bool" setter="set_shadow_atlas_16_bits" getter="get_shadow_atlas_16_bits" default="true"> + </member> <member name="shadow_atlas_quad_0" type="int" setter="set_shadow_atlas_quadrant_subdiv" getter="get_shadow_atlas_quadrant_subdiv" enum="Viewport.ShadowAtlasQuadrantSubdiv" default="2"> The subdivision amount of the first quadrant on the shadow atlas. </member> @@ -252,9 +254,9 @@ <member name="shadow_atlas_quad_3" type="int" setter="set_shadow_atlas_quadrant_subdiv" getter="get_shadow_atlas_quadrant_subdiv" enum="Viewport.ShadowAtlasQuadrantSubdiv" default="4"> The subdivision amount of the fourth quadrant on the shadow atlas. </member> - <member name="shadow_atlas_size" type="int" setter="set_shadow_atlas_size" getter="get_shadow_atlas_size" default="0"> + <member name="shadow_atlas_size" type="int" setter="set_shadow_atlas_size" getter="get_shadow_atlas_size" default="2048"> The shadow atlas' resolution (used for omni and spot lights). The value will be rounded up to the nearest power of 2. - [b]Note:[/b] If this is set to 0, shadows won't be visible. Since user-created viewports default to a value of 0, this value must be set above 0 manually. + [b]Note:[/b] If this is set to 0, shadows won't be visible. </member> <member name="snap_2d_transforms_to_pixel" type="bool" setter="set_snap_2d_transforms_to_pixel" getter="is_snap_2d_transforms_to_pixel_enabled" default="false"> </member> @@ -409,6 +411,14 @@ </constant> <constant name="DEBUG_DRAW_DISABLE_LOD" value="18" enum="DebugDraw"> </constant> + <constant name="DEBUG_DRAW_CLUSTER_OMNI_LIGHTS" value="19" enum="DebugDraw"> + </constant> + <constant name="DEBUG_DRAW_CLUSTER_SPOT_LIGHTS" value="20" enum="DebugDraw"> + </constant> + <constant name="DEBUG_DRAW_CLUSTER_DECALS" value="21" enum="DebugDraw"> + </constant> + <constant name="DEBUG_DRAW_CLUSTER_REFLECTION_PROBES" value="22" enum="DebugDraw"> + </constant> <constant name="DEFAULT_CANVAS_ITEM_TEXTURE_FILTER_NEAREST" value="0" enum="DefaultCanvasItemTextureFilter"> The texture filter reads from the nearest pixel only. The simplest and fastest method of filtering, but the texture will look pixelized. </constant> diff --git a/doc/classes/VisualShaderNodeClamp.xml b/doc/classes/VisualShaderNodeClamp.xml new file mode 100644 index 0000000000..504171bb13 --- /dev/null +++ b/doc/classes/VisualShaderNodeClamp.xml @@ -0,0 +1,32 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeClamp" inherits="VisualShaderNode" version="4.0"> + <brief_description> + Clamps a value within the visual shader graph. + </brief_description> + <description> + Constrains a value to lie between [code]min[/code] and [code]max[/code] values. + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="op_type" type="int" setter="set_op_type" getter="get_op_type" enum="VisualShaderNodeClamp.OpType" default="0"> + A type of operands and returned value. + </member> + </members> + <constants> + <constant name="OP_TYPE_FLOAT" value="0" enum="OpType"> + A floating-point scalar. + </constant> + <constant name="OP_TYPE_INT" value="1" enum="OpType"> + An integer scalar. + </constant> + <constant name="OP_TYPE_VECTOR" value="2" enum="OpType"> + A vector type. + </constant> + <constant name="OP_TYPE_MAX" value="3" enum="OpType"> + Represents the size of the [enum OpType] enum. + </constant> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeComment.xml b/doc/classes/VisualShaderNodeComment.xml new file mode 100644 index 0000000000..8970e2fabb --- /dev/null +++ b/doc/classes/VisualShaderNodeComment.xml @@ -0,0 +1,23 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeComment" inherits="VisualShaderNodeResizableBase" version="4.0"> + <brief_description> + A comment node to be placed on visual shader graph. + </brief_description> + <description> + A resizable rectangular area with changeable [member title] and [member description] used for better organizing of other visual shader nodes. + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="description" type="String" setter="set_description" getter="get_description" default=""""> + An additional description which placed below the title. + </member> + <member name="title" type="String" setter="set_title" getter="get_title" default=""Comment""> + A title of the node. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeCustom.xml b/doc/classes/VisualShaderNodeCustom.xml index 59b501660a..17fc2f8c4d 100644 --- a/doc/classes/VisualShaderNodeCustom.xml +++ b/doc/classes/VisualShaderNodeCustom.xml @@ -20,7 +20,7 @@ <return type="String"> </return> <description> - Override this method to define the path to the associated custom node in the Visual Shader Editor's members dialog. The path may looks like [code]"MyGame/MyFunctions/Noise"[/code]. + Override this method to define the path to the associated custom node in the Visual Shader Editor's members dialog. The path may look like [code]"MyGame/MyFunctions/Noise"[/code]. Defining this method is [b]optional[/b]. If not overridden, the node will be filed under the "Addons" category. </description> </method> diff --git a/doc/classes/VisualShaderNodeDeterminant.xml b/doc/classes/VisualShaderNodeDeterminant.xml index 72be31872d..6b042f6172 100644 --- a/doc/classes/VisualShaderNodeDeterminant.xml +++ b/doc/classes/VisualShaderNodeDeterminant.xml @@ -4,7 +4,7 @@ Calculates the determinant of a [Transform] within the visual shader graph. </brief_description> <description> - Translates to [code]deteminant(x)[/code] in the shader language. + Translates to [code]determinant(x)[/code] in the shader language. </description> <tutorials> </tutorials> diff --git a/doc/classes/VisualShaderNodeExpression.xml b/doc/classes/VisualShaderNodeExpression.xml index f571edaab3..c2cbf41f45 100644 --- a/doc/classes/VisualShaderNodeExpression.xml +++ b/doc/classes/VisualShaderNodeExpression.xml @@ -5,7 +5,7 @@ </brief_description> <description> Custom Godot Shading Language expression, with a custom amount of input and output ports. - The provided code is directly injected into the graph's matching shader function ([code]vertex[/code], [code]fragment[/code], or [code]light[/code]), so it cannot be used to to declare functions, varyings, uniforms, or global constants. See [VisualShaderNodeGlobalExpression] for such global definitions. + The provided code is directly injected into the graph's matching shader function ([code]vertex[/code], [code]fragment[/code], or [code]light[/code]), so it cannot be used to declare functions, varyings, uniforms, or global constants. See [VisualShaderNodeGlobalExpression] for such global definitions. </description> <tutorials> </tutorials> diff --git a/doc/classes/VisualShaderNodeFaceForward.xml b/doc/classes/VisualShaderNodeFaceForward.xml index 5ef08ea8c2..48f84e5495 100644 --- a/doc/classes/VisualShaderNodeFaceForward.xml +++ b/doc/classes/VisualShaderNodeFaceForward.xml @@ -4,7 +4,7 @@ Returns the vector that points in the same direction as a reference vector within the visual shader graph. </brief_description> <description> - Translates to [code]faceforward(N, I, Nref)[/code] in the shader language. The function has three vector parameters: [code]N[/code], the vector to orient, [code]I[/code], the incident vector, and [code]Nref[/code], the reference vector. If the dot product of [code]I[/code] and [code]Nref[/code] is smaller than zero the return value is [code]N[/code]. Otherwise [code]-N[/code] is returned. + Translates to [code]faceforward(N, I, Nref)[/code] in the shader language. The function has three vector parameters: [code]N[/code], the vector to orient, [code]I[/code], the incident vector, and [code]Nref[/code], the reference vector. If the dot product of [code]I[/code] and [code]Nref[/code] is smaller than zero the return value is [code]N[/code]. Otherwise, [code]-N[/code] is returned. </description> <tutorials> </tutorials> diff --git a/doc/classes/VisualShaderNodeGroupBase.xml b/doc/classes/VisualShaderNodeGroupBase.xml index afa14c776e..be3f7f173d 100644 --- a/doc/classes/VisualShaderNodeGroupBase.xml +++ b/doc/classes/VisualShaderNodeGroupBase.xml @@ -74,7 +74,7 @@ <return type="String"> </return> <description> - Returns a [String] description of the input ports as as colon-separated list using the format [code]id,type,name;[/code] (see [method add_input_port]). + Returns a [String] description of the input ports as a colon-separated list using the format [code]id,type,name;[/code] (see [method add_input_port]). </description> </method> <method name="get_output_port_count" qualifiers="const"> @@ -88,7 +88,7 @@ <return type="String"> </return> <description> - Returns a [String] description of the output ports as as colon-separated list using the format [code]id,type,name;[/code] (see [method add_output_port]). + Returns a [String] description of the output ports as a colon-separated list using the format [code]id,type,name;[/code] (see [method add_output_port]). </description> </method> <method name="has_input_port" qualifiers="const"> diff --git a/doc/classes/VisualShaderNodeIf.xml b/doc/classes/VisualShaderNodeIf.xml index ad0b21a370..418999863b 100644 --- a/doc/classes/VisualShaderNodeIf.xml +++ b/doc/classes/VisualShaderNodeIf.xml @@ -4,7 +4,7 @@ Compares two floating-point numbers in order to return a required vector within the visual shader graph. </brief_description> <description> - First two ports are scalar floatin-point numbers to compare, third is tolerance comparison amount and last three ports represents a vectors returned if [code]a == b[/code], [code]a > b[/code] and [code]a < b[/code] respectively. + First two ports are scalar floating-point numbers to compare, third is tolerance comparison amount and last three ports represents a vectors returned if [code]a == b[/code], [code]a > b[/code] and [code]a < b[/code] respectively. </description> <tutorials> </tutorials> diff --git a/doc/classes/VisualShaderNodeInput.xml b/doc/classes/VisualShaderNodeInput.xml index 8e819b011c..067f78dffe 100644 --- a/doc/classes/VisualShaderNodeInput.xml +++ b/doc/classes/VisualShaderNodeInput.xml @@ -14,7 +14,7 @@ <return type="String"> </return> <description> - Returns a translated name of the current constant in the Godot Shader Language. eg. [code]"ALBEDO"[/code] if the [member input_name] equal to [code]"albedo"[/code]. + Returns a translated name of the current constant in the Godot Shader Language. E.g. [code]"ALBEDO"[/code] if the [member input_name] equal to [code]"albedo"[/code]. </description> </method> </methods> diff --git a/doc/classes/VisualShaderNodeIntFunc.xml b/doc/classes/VisualShaderNodeIntFunc.xml index 5c68c0ec71..a9f4144a01 100644 --- a/doc/classes/VisualShaderNodeIntFunc.xml +++ b/doc/classes/VisualShaderNodeIntFunc.xml @@ -11,7 +11,7 @@ <methods> </methods> <members> - <member name="function" type="int" setter="set_function" getter="get_function" enum="VisualShaderNodeIntFunc.Function" default="3"> + <member name="function" type="int" setter="set_function" getter="get_function" enum="VisualShaderNodeIntFunc.Function" default="2"> A function to be applied to the scalar. See [enum Function] for options. </member> </members> @@ -19,13 +19,10 @@ <constant name="FUNC_ABS" value="0" enum="Function"> Returns the absolute value of the parameter. Translates to [code]abs(x)[/code] in the Godot Shader Language. </constant> - <constant name="FUNC_CLAMP" value="1" enum="Function"> - Constrains a parameter between [code]min[/code] and [code]max[/code]. Translates to [code]clamp(x, min, max)[/code] in the Godot Shader Language. - </constant> - <constant name="FUNC_NEGATE" value="2" enum="Function"> + <constant name="FUNC_NEGATE" value="1" enum="Function"> Negates the [code]x[/code] using [code]-(x)[/code]. </constant> - <constant name="FUNC_SIGN" value="3" enum="Function"> + <constant name="FUNC_SIGN" value="2" enum="Function"> Extracts the sign of the parameter. Translates to [code]sign(x)[/code] in the Godot Shader Language. </constant> </constants> diff --git a/doc/classes/VisualShaderNodeMix.xml b/doc/classes/VisualShaderNodeMix.xml new file mode 100644 index 0000000000..c70ac7e599 --- /dev/null +++ b/doc/classes/VisualShaderNodeMix.xml @@ -0,0 +1,32 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeMix" inherits="VisualShaderNode" version="4.0"> + <brief_description> + Linearly interpolates between two values within the visual shader graph. + </brief_description> + <description> + Translates to [code]mix(a, b, weight)[/code] in the shader language. + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="op_type" type="int" setter="set_op_type" getter="get_op_type" enum="VisualShaderNodeMix.OpType" default="0"> + A type of operands and returned value. + </member> + </members> + <constants> + <constant name="OP_TYPE_SCALAR" value="0" enum="OpType"> + A scalar type. + </constant> + <constant name="OP_TYPE_VECTOR" value="1" enum="OpType"> + A vector type. + </constant> + <constant name="OP_TYPE_VECTOR_SCALAR" value="2" enum="OpType"> + A vector type. [code]weight[/code] port is using a scalar type. + </constant> + <constant name="OP_TYPE_MAX" value="3" enum="OpType"> + Represents the size of the [enum OpType] enum. + </constant> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeSDFRaymarch.xml b/doc/classes/VisualShaderNodeSDFRaymarch.xml index d700761fdb..775f2814c2 100644 --- a/doc/classes/VisualShaderNodeSDFRaymarch.xml +++ b/doc/classes/VisualShaderNodeSDFRaymarch.xml @@ -1,10 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="VisualShaderNodeSDFRaymarch" inherits="VisualShaderNode" version="4.0"> <brief_description> - SDF raymarching algorithm to be used within the visual shader graph. + SDF raymarching algorithm to be used within the visual shader graph. </brief_description> <description> - Casts a ray against the screen SDF (signed-distance field) and returns the distance travelled. + Casts a ray against the screen SDF (signed-distance field) and returns the distance travelled. </description> <tutorials> </tutorials> diff --git a/doc/classes/VisualShaderNodeSDFToScreenUV.xml b/doc/classes/VisualShaderNodeSDFToScreenUV.xml index ea04180095..40fb66e364 100644 --- a/doc/classes/VisualShaderNodeSDFToScreenUV.xml +++ b/doc/classes/VisualShaderNodeSDFToScreenUV.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="VisualShaderNodeSDFToScreenUV" inherits="VisualShaderNode" version="4.0"> <brief_description> - A function to convert a SDF (signed-distance field) to screen UV, to be used within the visual shader graph. + A function to convert an SDF (signed-distance field) to screen UV, to be used within the visual shader graph. </brief_description> <description> Translates to [code]sdf_to_screen_uv(sdf_pos)[/code] in the shader language. diff --git a/doc/classes/VisualShaderNodeScalarClamp.xml b/doc/classes/VisualShaderNodeScalarClamp.xml deleted file mode 100644 index 7432e8dfca..0000000000 --- a/doc/classes/VisualShaderNodeScalarClamp.xml +++ /dev/null @@ -1,15 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeScalarClamp" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Clamps a scalar value within the visual shader graph. - </brief_description> - <description> - Constrains a value to lie between [code]min[/code] and [code]max[/code] values. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeScalarInterp.xml b/doc/classes/VisualShaderNodeScalarInterp.xml deleted file mode 100644 index 393ea70e1a..0000000000 --- a/doc/classes/VisualShaderNodeScalarInterp.xml +++ /dev/null @@ -1,15 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeScalarInterp" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Linearly interpolates between two scalars within the visual shader graph. - </brief_description> - <description> - Translates to [code]mix(a, b, weight)[/code] in the shader language. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeScalarSmoothStep.xml b/doc/classes/VisualShaderNodeScalarSmoothStep.xml deleted file mode 100644 index e619cc8571..0000000000 --- a/doc/classes/VisualShaderNodeScalarSmoothStep.xml +++ /dev/null @@ -1,16 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeScalarSmoothStep" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Calculates a scalar SmoothStep function within the visual shader graph. - </brief_description> - <description> - Translates to [code]smoothstep(edge0, edge1, x)[/code] in the shader language. - Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge0[/code] and [code]1.0[/code] if [code]x[/code] is larger than [code]edge1[/code]. Otherwise the return value is interpolated between [code]0.0[/code] and [code]1.0[/code] using Hermite polynomials. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeScalarSwitch.xml b/doc/classes/VisualShaderNodeScalarSwitch.xml deleted file mode 100644 index 2ad5202745..0000000000 --- a/doc/classes/VisualShaderNodeScalarSwitch.xml +++ /dev/null @@ -1,15 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeScalarSwitch" inherits="VisualShaderNodeSwitch" version="4.0"> - <brief_description> - A boolean/scalar function for use within the visual shader graph. - </brief_description> - <description> - Returns an associated scalar if the provided boolean value is [code]true[/code] or [code]false[/code]. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeScreenUVToSDF.xml b/doc/classes/VisualShaderNodeScreenUVToSDF.xml index 438c8dc67b..2e121ffc54 100644 --- a/doc/classes/VisualShaderNodeScreenUVToSDF.xml +++ b/doc/classes/VisualShaderNodeScreenUVToSDF.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="VisualShaderNodeScreenUVToSDF" inherits="VisualShaderNode" version="4.0"> <brief_description> - A function to convert screen UV to a SDF (signed-distance field), to be used within the visual shader graph. + A function to convert screen UV to an SDF (signed-distance field), to be used within the visual shader graph. </brief_description> <description> Translates to [code]screen_uv_to_sdf(uv)[/code] in the shader language. If the UV port isn't connected, [code]SCREEN_UV[/code] is used instead. diff --git a/doc/classes/VisualShaderNodeSmoothStep.xml b/doc/classes/VisualShaderNodeSmoothStep.xml new file mode 100644 index 0000000000..0ed53a8c26 --- /dev/null +++ b/doc/classes/VisualShaderNodeSmoothStep.xml @@ -0,0 +1,33 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeSmoothStep" inherits="VisualShaderNode" version="4.0"> + <brief_description> + Calculates a SmoothStep function within the visual shader graph. + </brief_description> + <description> + Translates to [code]smoothstep(edge0, edge1, x)[/code] in the shader language. + Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge0[/code] and [code]1.0[/code] if [code]x[/code] is larger than [code]edge1[/code]. Otherwise, the return value is interpolated between [code]0.0[/code] and [code]1.0[/code] using Hermite polynomials. + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="op_type" type="int" setter="set_op_type" getter="get_op_type" enum="VisualShaderNodeSmoothStep.OpType" default="0"> + A type of operands and returned value. + </member> + </members> + <constants> + <constant name="OP_TYPE_SCALAR" value="0" enum="OpType"> + A scalar type. + </constant> + <constant name="OP_TYPE_VECTOR" value="1" enum="OpType"> + A vector type. + </constant> + <constant name="OP_TYPE_VECTOR_SCALAR" value="2" enum="OpType"> + A vector type. [code]edge0[/code] and [code]edge1[/code] are using a scalar type. + </constant> + <constant name="OP_TYPE_MAX" value="3" enum="OpType"> + Represents the size of the [enum OpType] enum. + </constant> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeStep.xml b/doc/classes/VisualShaderNodeStep.xml new file mode 100644 index 0000000000..694c144445 --- /dev/null +++ b/doc/classes/VisualShaderNodeStep.xml @@ -0,0 +1,33 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeStep" inherits="VisualShaderNode" version="4.0"> + <brief_description> + Calculates a Step function within the visual shader graph. + </brief_description> + <description> + Translates to [code]step(edge, x)[/code] in the shader language. + Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge[/code] and [code]1.0[/code] otherwise. + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="op_type" type="int" setter="set_op_type" getter="get_op_type" enum="VisualShaderNodeStep.OpType" default="0"> + A type of operands and returned value. + </member> + </members> + <constants> + <constant name="OP_TYPE_SCALAR" value="0" enum="OpType"> + A scalar type. + </constant> + <constant name="OP_TYPE_VECTOR" value="1" enum="OpType"> + A vector type. + </constant> + <constant name="OP_TYPE_VECTOR_SCALAR" value="2" enum="OpType"> + A vector type. [code]edge[/code] port is using a scalar type. + </constant> + <constant name="OP_TYPE_MAX" value="3" enum="OpType"> + Represents the size of the [enum OpType] enum. + </constant> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeSwitch.xml b/doc/classes/VisualShaderNodeSwitch.xml index 9f8a12c0fd..3961070a74 100644 --- a/doc/classes/VisualShaderNodeSwitch.xml +++ b/doc/classes/VisualShaderNodeSwitch.xml @@ -1,15 +1,38 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="VisualShaderNodeSwitch" inherits="VisualShaderNode" version="4.0"> <brief_description> - A boolean/vector function for use within the visual shader graph. + A selector function for use within the visual shader graph. </brief_description> <description> - Returns an associated vector if the provided boolean value is [code]true[/code] or [code]false[/code]. + Returns an associated value of the [code]op_type[/code] type if the provided boolean value is [code]true[/code] or [code]false[/code]. </description> <tutorials> </tutorials> <methods> </methods> + <members> + <member name="op_type" type="int" setter="set_op_type" getter="get_op_type" enum="VisualShaderNodeSwitch.OpType" default="0"> + A type of operands and returned value. + </member> + </members> <constants> + <constant name="OP_TYPE_FLOAT" value="0" enum="OpType"> + A floating-point scalar. + </constant> + <constant name="OP_TYPE_INT" value="1" enum="OpType"> + An integer scalar. + </constant> + <constant name="OP_TYPE_VECTOR" value="2" enum="OpType"> + A vector type. + </constant> + <constant name="OP_TYPE_BOOLEAN" value="3" enum="OpType"> + A boolean type. + </constant> + <constant name="OP_TYPE_TRANSFORM" value="4" enum="OpType"> + A transform type. + </constant> + <constant name="OP_TYPE_MAX" value="5" enum="OpType"> + Represents the size of the [enum OpType] enum. + </constant> </constants> </class> diff --git a/doc/classes/VisualShaderNodeTextureSDF.xml b/doc/classes/VisualShaderNodeTextureSDF.xml index 7d3d654bd0..b5c89c2c31 100644 --- a/doc/classes/VisualShaderNodeTextureSDF.xml +++ b/doc/classes/VisualShaderNodeTextureSDF.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="VisualShaderNodeTextureSDF" inherits="VisualShaderNode" version="4.0"> <brief_description> - Performs a SDF (signed-distance field) texture lookup within the visual shader graph. + Performs an SDF (signed-distance field) texture lookup within the visual shader graph. </brief_description> <description> Translates to [code]texture_sdf(sdf_pos)[/code] in the shader language. diff --git a/doc/classes/VisualShaderNodeTextureSDFNormal.xml b/doc/classes/VisualShaderNodeTextureSDFNormal.xml index 5dbf3e545a..25fe1c4b28 100644 --- a/doc/classes/VisualShaderNodeTextureSDFNormal.xml +++ b/doc/classes/VisualShaderNodeTextureSDFNormal.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="VisualShaderNodeTextureSDFNormal" inherits="VisualShaderNode" version="4.0"> <brief_description> - Performs a SDF (signed-distance field) normal texture lookup within the visual shader graph. + Performs an SDF (signed-distance field) normal texture lookup within the visual shader graph. </brief_description> <description> Translates to [code]texture_sdf_normal(sdf_pos)[/code] in the shader language. diff --git a/doc/classes/VisualShaderNodeVectorClamp.xml b/doc/classes/VisualShaderNodeVectorClamp.xml deleted file mode 100644 index 567fed8a41..0000000000 --- a/doc/classes/VisualShaderNodeVectorClamp.xml +++ /dev/null @@ -1,15 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeVectorClamp" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Clamps a vector value within the visual shader graph. - </brief_description> - <description> - Constrains a value to lie between [code]min[/code] and [code]max[/code] values. The operation is performed on each component of the vector individually. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeVectorInterp.xml b/doc/classes/VisualShaderNodeVectorInterp.xml deleted file mode 100644 index b63d34b742..0000000000 --- a/doc/classes/VisualShaderNodeVectorInterp.xml +++ /dev/null @@ -1,15 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeVectorInterp" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Linearly interpolates between two vectors within the visual shader graph. - </brief_description> - <description> - Translates to [code]mix(a, b, weight)[/code] in the shader language, where [code]weight[/code] is a [Vector3] with weights for each component. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeVectorScalarMix.xml b/doc/classes/VisualShaderNodeVectorScalarMix.xml deleted file mode 100644 index 791a9e6be1..0000000000 --- a/doc/classes/VisualShaderNodeVectorScalarMix.xml +++ /dev/null @@ -1,15 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeVectorScalarMix" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Linearly interpolates between two vectors using a scalar. For use within the visual shader graph. - </brief_description> - <description> - Translates to [code]mix(a, b, weight)[/code] in the shader language, where [code]a[/code] and [code]b[/code] are vectors and [code]weight[/code] is a scalar. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeVectorScalarSmoothStep.xml b/doc/classes/VisualShaderNodeVectorScalarSmoothStep.xml deleted file mode 100644 index 580abaf5fe..0000000000 --- a/doc/classes/VisualShaderNodeVectorScalarSmoothStep.xml +++ /dev/null @@ -1,16 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeVectorScalarSmoothStep" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Calculates a vector SmoothStep function using scalar within the visual shader graph. - </brief_description> - <description> - Translates to [code]smoothstep(edge0, edge1, x)[/code] in the shader language, where [code]x[/code] is a scalar. - Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge0[/code] and [code]1.0[/code] if [code]x[/code] is larger than [code]edge1[/code]. Otherwise the return value is interpolated between [code]0.0[/code] and [code]1.0[/code] using Hermite polynomials. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeVectorScalarStep.xml b/doc/classes/VisualShaderNodeVectorScalarStep.xml deleted file mode 100644 index d61414f3a8..0000000000 --- a/doc/classes/VisualShaderNodeVectorScalarStep.xml +++ /dev/null @@ -1,16 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeVectorScalarStep" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Calculates a vector Step function within the visual shader graph. - </brief_description> - <description> - Translates to [code]step(edge, x)[/code] in the shader language. - Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge[/code] and [code]1.0[/code] otherwise. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/VisualShaderNodeVectorSmoothStep.xml b/doc/classes/VisualShaderNodeVectorSmoothStep.xml deleted file mode 100644 index 1b77a3c535..0000000000 --- a/doc/classes/VisualShaderNodeVectorSmoothStep.xml +++ /dev/null @@ -1,16 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" ?> -<class name="VisualShaderNodeVectorSmoothStep" inherits="VisualShaderNode" version="4.0"> - <brief_description> - Calculates a vector SmoothStep function within the visual shader graph. - </brief_description> - <description> - Translates to [code]smoothstep(edge0, edge1, x)[/code] in the shader language, where [code]x[/code] is a vector. - Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge0[/code] and [code]1.0[/code] if [code]x[/code] is larger than [code]edge1[/code]. Otherwise the return value is interpolated between [code]0.0[/code] and [code]1.0[/code] using Hermite polynomials. - </description> - <tutorials> - </tutorials> - <methods> - </methods> - <constants> - </constants> -</class> diff --git a/doc/classes/Window.xml b/doc/classes/Window.xml index 0f887c7705..b99a251a11 100644 --- a/doc/classes/Window.xml +++ b/doc/classes/Window.xml @@ -276,7 +276,7 @@ <method name="set_ime_active"> <return type="void"> </return> - <argument index="0" name="arg0" type="bool"> + <argument index="0" name="active" type="bool"> </argument> <description> </description> @@ -284,7 +284,7 @@ <method name="set_ime_position"> <return type="void"> </return> - <argument index="0" name="arg0" type="Vector2i"> + <argument index="0" name="position" type="Vector2i"> </argument> <description> </description> @@ -474,8 +474,17 @@ </theme_item> <theme_item name="title_font" type="Font"> </theme_item> + <theme_item name="title_font_size" type="int"> + The size of the title font. + </theme_item> <theme_item name="title_height" type="int" default="20"> </theme_item> + <theme_item name="title_outline_modulate" type="Color" default="Color( 1, 1, 1, 1 )"> + The color of the title outline. + </theme_item> + <theme_item name="title_outline_size" type="int" default="0"> + The size of the title outline. + </theme_item> <theme_item name="window_panel" type="StyleBox"> </theme_item> </theme_items> diff --git a/doc/classes/World2D.xml b/doc/classes/World2D.xml index 25033cdb09..20b3afbd0b 100644 --- a/doc/classes/World2D.xml +++ b/doc/classes/World2D.xml @@ -18,6 +18,9 @@ <member name="direct_space_state" type="PhysicsDirectSpaceState2D" setter="" getter="get_direct_space_state"> Direct access to the world's physics 2D space state. Used for querying current and potential collisions. When using multi-threaded physics, access is limited to [code]_physics_process(delta)[/code] in the main thread. </member> + <member name="navigation_map" type="RID" setter="" getter="get_navigation_map"> + The [RID] of this world's navigation map. Used by the [NavigationServer2D]. + </member> <member name="space" type="RID" setter="" getter="get_space"> The [RID] of this world's physics space resource. Used by the [PhysicsServer2D] for 2D physics, treating it as both a space and an area. </member> diff --git a/doc/classes/World3D.xml b/doc/classes/World3D.xml index fe92077432..610ecacff4 100644 --- a/doc/classes/World3D.xml +++ b/doc/classes/World3D.xml @@ -23,6 +23,9 @@ <member name="fallback_environment" type="Environment" setter="set_fallback_environment" getter="get_fallback_environment"> The World3D's fallback_environment will be used if the World3D's [Environment] fails or is missing. </member> + <member name="navigation_map" type="RID" setter="" getter="get_navigation_map"> + The [RID] of this world's navigation map. Used by the [NavigationServer3D]. + </member> <member name="scenario" type="RID" setter="" getter="get_scenario"> The World3D's visual scenario. </member> diff --git a/doc/classes/XRController3D.xml b/doc/classes/XRController3D.xml index a4a86cc22a..5d8c23bd6f 100644 --- a/doc/classes/XRController3D.xml +++ b/doc/classes/XRController3D.xml @@ -62,7 +62,7 @@ <argument index="0" name="button" type="int"> </argument> <description> - Returns [code]true[/code] if the button at index [code]button[/code] is pressed. See [enum JoyButtonList]. + Returns [code]true[/code] if the button at index [code]button[/code] is pressed. See [enum JoyButton]. </description> </method> </methods> diff --git a/doc/classes/XRPositionalTracker.xml b/doc/classes/XRPositionalTracker.xml index 36cd6e2ea0..5274d952fd 100644 --- a/doc/classes/XRPositionalTracker.xml +++ b/doc/classes/XRPositionalTracker.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="XRPositionalTracker" inherits="Object" version="4.0"> +<class name="XRPositionalTracker" inherits="Reference" version="4.0"> <brief_description> A tracked object. </brief_description> diff --git a/doc/classes/XRServer.xml b/doc/classes/XRServer.xml index 75a05bef17..d0edf91fed 100644 --- a/doc/classes/XRServer.xml +++ b/doc/classes/XRServer.xml @@ -10,6 +10,24 @@ <link title="VR tutorial index">https://docs.godotengine.org/en/latest/tutorials/vr/index.html</link> </tutorials> <methods> + <method name="add_interface"> + <return type="void"> + </return> + <argument index="0" name="interface" type="XRInterface"> + </argument> + <description> + Registers an [XRInterface] object. + </description> + </method> + <method name="add_tracker"> + <return type="void"> + </return> + <argument index="0" name="tracker" type="XRPositionalTracker"> + </argument> + <description> + Registers a new [XRPositionalTracker] that tracks a spatial location in real space. + </description> + </method> <method name="center_on_hmd"> <return type="void"> </return> @@ -26,6 +44,15 @@ You should call this method after a few seconds have passed. For instance, when the user requests a realignment of the display holding a designated button on a controller for a short period of time, or when implementing a teleport mechanism. </description> </method> + <method name="clear_primary_interface_if"> + <return type="void"> + </return> + <argument index="0" name="interface" type="XRInterface"> + </argument> + <description> + Clears our current primary interface if it is set to the provided interface. + </description> + </method> <method name="find_interface" qualifiers="const"> <return type="XRInterface"> </return> @@ -109,6 +136,24 @@ Returns the number of trackers currently registered. </description> </method> + <method name="remove_interface"> + <return type="void"> + </return> + <argument index="0" name="interface" type="XRInterface"> + </argument> + <description> + Removes this interface. + </description> + </method> + <method name="remove_tracker"> + <return type="void"> + </return> + <argument index="0" name="tracker" type="XRPositionalTracker"> + </argument> + <description> + Removes this positional tracker. + </description> + </method> </methods> <members> <member name="primary_interface" type="XRInterface" setter="set_primary_interface" getter="get_primary_interface"> diff --git a/doc/classes/bool.xml b/doc/classes/bool.xml index 03e8bee7d5..48f336d58c 100644 --- a/doc/classes/bool.xml +++ b/doc/classes/bool.xml @@ -4,7 +4,7 @@ Boolean built-in type. </brief_description> <description> - Boolean is a built-in type. There are two boolean values: [code]true[/code] and [code]false[/code]. You can think of it as an switch with on or off (1 or 0) setting. Booleans are used in programming for logic in condition statements, like [code]if[/code] statements. + Boolean is a built-in type. There are two boolean values: [code]true[/code] and [code]false[/code]. You can think of it as a switch with on or off (1 or 0) setting. Booleans are used in programming for logic in condition statements, like [code]if[/code] statements. Booleans can be directly used in [code]if[/code] statements. The code below demonstrates this on the [code]if can_shoot:[/code] line. You don't need to use [code]== true[/code], you only need [code]if can_shoot:[/code]. Similarly, use [code]if not can_shoot:[/code] rather than [code]== false[/code]. [codeblocks] [gdscript] @@ -49,6 +49,7 @@ [/csharp] [/codeblocks] The following code will set [code]can_shoot[/code] to [code]false[/code] and start a timer. This will prevent player from shooting until the timer runs out. Next [code]can_shoot[/code] will be set to [code]true[/code] again allowing player to shoot once again. + [codeblocks] [gdscript] var _can_shoot = true onready var _cool_down = $CoolDownTimer @@ -131,6 +132,7 @@ <argument index="0" name="right" type="bool"> </argument> <description> + Returns [code]true[/code] if two bools are different, i.e. one is [code]true[/code] and the other is [code]false[/code]. </description> </method> <method name="operator <" qualifiers="operator"> @@ -139,6 +141,7 @@ <argument index="0" name="right" type="bool"> </argument> <description> + Returns [code]true[/code] if left operand is [code]false[/code] and right operand is [code]true[/code]. </description> </method> <method name="operator ==" qualifiers="operator"> @@ -147,6 +150,7 @@ <argument index="0" name="right" type="bool"> </argument> <description> + Returns [code]true[/code] if two bools are equal, i.e. both are [code]true[/code] or both are [code]false[/code]. </description> </method> <method name="operator >" qualifiers="operator"> @@ -155,6 +159,7 @@ <argument index="0" name="right" type="bool"> </argument> <description> + Returns [code]true[/code] if left operand is [code]true[/code] and right operand is [code]false[/code]. </description> </method> </methods> diff --git a/doc/classes/float.xml b/doc/classes/float.xml index 85fe31eec8..11f6d91b05 100644 --- a/doc/classes/float.xml +++ b/doc/classes/float.xml @@ -49,6 +49,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] if two floats are different from each other. </description> </method> <method name="operator !=" qualifiers="operator"> @@ -57,6 +58,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] if the integer has different value than the float. </description> </method> <method name="operator *" qualifiers="operator"> @@ -65,6 +67,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Multiplies two [float]s. </description> </method> <method name="operator *" qualifiers="operator"> @@ -73,6 +76,10 @@ <argument index="0" name="right" type="Vector2"> </argument> <description> + Multiplies each component of the [Vector2] by the given [float]. + [codeblock] + print(2.5 * Vector2(1, 1)) # Vector2(2.5, 2.5) + [/codeblock] </description> </method> <method name="operator *" qualifiers="operator"> @@ -81,6 +88,10 @@ <argument index="0" name="right" type="Vector2i"> </argument> <description> + Multiplies each component of the [Vector2i] by the given [float]. + [codeblock] + print(2.0 * Vector2i(1, 1)) # Vector2i(2.0, 2.0) + [/codeblock] </description> </method> <method name="operator *" qualifiers="operator"> @@ -89,6 +100,7 @@ <argument index="0" name="right" type="Vector3"> </argument> <description> + Multiplies each component of the [Vector3] by the given [float]. </description> </method> <method name="operator *" qualifiers="operator"> @@ -97,6 +109,7 @@ <argument index="0" name="right" type="Vector3i"> </argument> <description> + Multiplies each component of the [Vector3i] by the given [float]. </description> </method> <method name="operator *" qualifiers="operator"> @@ -105,6 +118,7 @@ <argument index="0" name="right" type="Quat"> </argument> <description> + Multiplies each component of the [Quat] by the given [float]. </description> </method> <method name="operator *" qualifiers="operator"> @@ -113,6 +127,10 @@ <argument index="0" name="right" type="Color"> </argument> <description> + Multiplies each component of the [Color] by the given [float]. + [codeblock] + print(1.5 * Color(0.5, 0.5, 0.5)) # Color(0.75, 0.75, 0.75) + [/codeblock] </description> </method> <method name="operator *" qualifiers="operator"> @@ -121,12 +139,17 @@ <argument index="0" name="right" type="int"> </argument> <description> + Multiplies a [float] and an [int]. The result is a [float]. </description> </method> <method name="operator +" qualifiers="operator"> <return type="float"> </return> <description> + Unary plus operator. Doesn't have any effect. + [codeblock] + var a = +2.5 # a is 2.5. + [/codeblock] </description> </method> <method name="operator +" qualifiers="operator"> @@ -135,6 +158,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Adds two floats. </description> </method> <method name="operator +" qualifiers="operator"> @@ -143,12 +167,18 @@ <argument index="0" name="right" type="int"> </argument> <description> + Adds a [float] and an [int]. The result is a [float]. </description> </method> <method name="operator -" qualifiers="operator"> <return type="float"> </return> <description> + Unary minus operator. Negates the number. + [codeblock] + var a = -2.5 # a is -2.5. + print(-a) # 2.5 + [/codeblock] </description> </method> <method name="operator -" qualifiers="operator"> @@ -157,6 +187,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Subtracts a float from a float. </description> </method> <method name="operator -" qualifiers="operator"> @@ -165,6 +196,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Subtracts an [int] from a [float]. The result is a [float]. </description> </method> <method name="operator /" qualifiers="operator"> @@ -173,6 +205,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Divides two floats. </description> </method> <method name="operator /" qualifiers="operator"> @@ -181,6 +214,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Divides a [float] by an [int]. The result is a [float]. </description> </method> <method name="operator <" qualifiers="operator"> @@ -189,6 +223,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] the left float is less than the right one. </description> </method> <method name="operator <" qualifiers="operator"> @@ -197,6 +232,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] if this [float] is less than the given [int]. </description> </method> <method name="operator <=" qualifiers="operator"> @@ -205,6 +241,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] the left integer is less than or equal to the right one. </description> </method> <method name="operator <=" qualifiers="operator"> @@ -213,6 +250,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] if this [float] is less than or equal to the given [int]. </description> </method> <method name="operator ==" qualifiers="operator"> @@ -221,6 +259,8 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] if both floats are exactly equal. + [b]Note:[/b] Due to floating-point precision errors, consider using [method @GlobalScope.is_equal_approx] or [method @GlobalScope.is_zero_approx] instead, which are more reliable. </description> </method> <method name="operator ==" qualifiers="operator"> @@ -229,6 +269,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] if the [float] and the given [int] are equal. </description> </method> <method name="operator >" qualifiers="operator"> @@ -237,6 +278,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] the left float is greater than the right one. </description> </method> <method name="operator >" qualifiers="operator"> @@ -245,6 +287,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] if this [float] is greater than the given [int]. </description> </method> <method name="operator >=" qualifiers="operator"> @@ -253,6 +296,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] the left float is greater than or equal to the right one. </description> </method> <method name="operator >=" qualifiers="operator"> @@ -261,6 +305,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] if this [float] is greater than or equal to the given [int]. </description> </method> </methods> diff --git a/doc/classes/int.xml b/doc/classes/int.xml index a63c509937..119cdf8eeb 100644 --- a/doc/classes/int.xml +++ b/doc/classes/int.xml @@ -79,6 +79,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] if operands are different from each other. </description> </method> <method name="operator !=" qualifiers="operator"> @@ -87,6 +88,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] if operands are different from each other. </description> </method> <method name="operator %" qualifiers="operator"> @@ -95,6 +97,12 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns the result of the modulo operator for two integers, i.e. the remainder after dividing both numbers. + [codeblock] + print(5 % 2) # 1 + print(12 % 4) # 0 + print(12 % 2) # 2 + [/codeblock] </description> </method> <method name="operator &" qualifiers="operator"> @@ -103,6 +111,18 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns the result of bitwise [code]AND[/code] operation for two integers. + [codeblock] + print(3 & 1) # 1 + print(11 & 3) # 3 + [/codeblock] + It's useful to retrieve binary flags from a variable. + [codeblock] + var flags = 5 + # Do something if the first bit is enabled. + if flags & 1: + do_stuff() + [/codeblock] </description> </method> <method name="operator *" qualifiers="operator"> @@ -111,6 +131,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Multiplies an [int] and a [float]. The result is a [float]. </description> </method> <method name="operator *" qualifiers="operator"> @@ -119,6 +140,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Multiplies two [int]s. </description> </method> <method name="operator *" qualifiers="operator"> @@ -127,6 +149,10 @@ <argument index="0" name="right" type="Vector2"> </argument> <description> + Multiplies each component of the vector by the given integer. + [codeblock] + print(2 * Vector2(1, 1)) # Vector2(2, 2) + [/codeblock] </description> </method> <method name="operator *" qualifiers="operator"> @@ -135,6 +161,7 @@ <argument index="0" name="right" type="Vector2i"> </argument> <description> + Multiplies each component of the integer vector by the given integer. </description> </method> <method name="operator *" qualifiers="operator"> @@ -143,6 +170,7 @@ <argument index="0" name="right" type="Vector3"> </argument> <description> + Multiplies each component of the vector by the given integer. </description> </method> <method name="operator *" qualifiers="operator"> @@ -151,6 +179,7 @@ <argument index="0" name="right" type="Vector3i"> </argument> <description> + Multiplies each component of the integer vector by the given integer. </description> </method> <method name="operator *" qualifiers="operator"> @@ -159,6 +188,7 @@ <argument index="0" name="right" type="Quat"> </argument> <description> + Multiplies each component of the quaternion by the given integer. </description> </method> <method name="operator *" qualifiers="operator"> @@ -167,12 +197,20 @@ <argument index="0" name="right" type="Color"> </argument> <description> + Multiplies each component of the color by the given integer. + [codeblock] + print(2 * Color(0.5, 0.5, 0.5)) # Color(1, 1, 1) + [/codeblock] </description> </method> <method name="operator +" qualifiers="operator"> <return type="int"> </return> <description> + Unary plus operator. Doesn't have any effect. + [codeblock] + var a = +1 # a is 1. + [/codeblock] </description> </method> <method name="operator +" qualifiers="operator"> @@ -181,6 +219,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Adds an [int] to a [float]. The result is a [float]. </description> </method> <method name="operator +" qualifiers="operator"> @@ -189,12 +228,18 @@ <argument index="0" name="right" type="int"> </argument> <description> + Adds two integers. </description> </method> <method name="operator -" qualifiers="operator"> <return type="int"> </return> <description> + Unary minus operator. Negates the number. + [codeblock] + var a = -1 # a is -1. + print(-a) # 1 + [/codeblock] </description> </method> <method name="operator -" qualifiers="operator"> @@ -203,6 +248,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Subtracts a [float] from an [int]. The result is a [float]. </description> </method> <method name="operator -" qualifiers="operator"> @@ -211,6 +257,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Subtracts two integers. </description> </method> <method name="operator /" qualifiers="operator"> @@ -219,6 +266,10 @@ <argument index="0" name="right" type="float"> </argument> <description> + Divides an [int] by a [float]. The result is a [float]. + [codeblock] + print(10 / 3.0) # 3.333... + [/codeblock] </description> </method> <method name="operator /" qualifiers="operator"> @@ -227,6 +278,11 @@ <argument index="0" name="right" type="int"> </argument> <description> + Divides two integers. The decimal part of the result is discarded (truncated). + [codeblock] + print(10 / 2) # 5 + print(10 / 3) # 3 + [/codeblock] </description> </method> <method name="operator <" qualifiers="operator"> @@ -235,6 +291,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] if this [int] is less than the given [float]. </description> </method> <method name="operator <" qualifiers="operator"> @@ -243,6 +300,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] the left integer is less than the right one. </description> </method> <method name="operator <<" qualifiers="operator"> @@ -251,6 +309,11 @@ <argument index="0" name="right" type="int"> </argument> <description> + Performs bitwise shift left operation on the integer. Effectively the same as multiplying by a power of 2. + [codeblock] + print(10 << 1) # 20 + print(10 << 4) # 160 + [/codeblock] </description> </method> <method name="operator <=" qualifiers="operator"> @@ -259,6 +322,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] if this [int] is less than or equal to the given [float]. </description> </method> <method name="operator <=" qualifiers="operator"> @@ -267,6 +331,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] the left integer is less than or equal to the right one. </description> </method> <method name="operator ==" qualifiers="operator"> @@ -275,6 +340,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] if the integer is equal to the given [float]. </description> </method> <method name="operator ==" qualifiers="operator"> @@ -283,6 +349,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] if both integers are equal. </description> </method> <method name="operator >" qualifiers="operator"> @@ -291,6 +358,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] if this [int] is greater than the given [float]. </description> </method> <method name="operator >" qualifiers="operator"> @@ -299,6 +367,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] the left integer is greater than the right one. </description> </method> <method name="operator >=" qualifiers="operator"> @@ -307,6 +376,7 @@ <argument index="0" name="right" type="float"> </argument> <description> + Returns [code]true[/code] if this [int] is greater than or equal to the given [float]. </description> </method> <method name="operator >=" qualifiers="operator"> @@ -315,6 +385,7 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns [code]true[/code] the left integer is greater than or equal to the right one. </description> </method> <method name="operator >>" qualifiers="operator"> @@ -323,6 +394,11 @@ <argument index="0" name="right" type="int"> </argument> <description> + Performs bitwise shift right operation on the integer. Effectively the same as dividing by a power of 2. + [codeblock] + print(10 >> 1) # 5 + print(10 >> 2) # 2 + [/codeblock] </description> </method> <method name="operator ^" qualifiers="operator"> @@ -331,6 +407,11 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns the result of bitwise [code]XOR[/code] operation for two integers. + [codeblock] + print(5 ^ 1) # 4 + print(4 ^ 7) # 3 + [/codeblock] </description> </method> <method name="operator |" qualifiers="operator"> @@ -339,12 +420,29 @@ <argument index="0" name="right" type="int"> </argument> <description> + Returns the result of bitwise [code]OR[/code] operation for two integers. + [codeblock] + print(2 | 4) # 6 + print(1 | 3) # 3 + [/codeblock] + It's useful to store binary flags in a variable. + [codeblock] + var flags = 0 + # Turn first and third bit on. + flags |= 1 + flags |= 4 + [/codeblock] </description> </method> <method name="operator ~" qualifiers="operator"> <return type="int"> </return> <description> + Returns the result of bitwise [code]NOT[/code] operation for the integer. It's effectively equal to [code]-int + 1[/code]. + [codeblock] + print(~4) # -3 + print(~7) # -6 + [/codeblock] </description> </method> </methods> diff --git a/doc/tools/makerst.py b/doc/tools/makerst.py index 5335116c8a..ae3cc73098 100755 --- a/doc/tools/makerst.py +++ b/doc/tools/makerst.py @@ -110,6 +110,9 @@ class ClassDef: self.theme_items = None # type: Optional[OrderedDict[str, List[ThemeItemDef]]] self.tutorials = [] # type: List[str] + # Used to match the class with XML source for output filtering purposes. + self.filepath = "" # type: str + class State: def __init__(self): # type: () -> None @@ -118,11 +121,12 @@ class State: self.classes = OrderedDict() # type: OrderedDict[str, ClassDef] self.current_class = "" # type: str - def parse_class(self, class_root): # type: (ET.Element) -> None + def parse_class(self, class_root, filepath): # type: (ET.Element, str) -> None class_name = class_root.attrib["name"] class_def = ClassDef(class_name) self.classes[class_name] = class_def + class_def.filepath = filepath inherits = class_root.get("inherits") if inherits is not None: @@ -278,6 +282,7 @@ def parse_arguments(root): # type: (ET.Element) -> List[ParameterDef] def main(): # type: () -> None parser = argparse.ArgumentParser() parser.add_argument("path", nargs="+", help="A path to an XML file or a directory containing XML files to parse.") + parser.add_argument("--filter", default="", help="The filepath pattern for XML files to filter.") group = parser.add_mutually_exclusive_group() group.add_argument("--output", "-o", default=".", help="The directory to save output .rst files in.") group.add_argument( @@ -333,17 +338,21 @@ def main(): # type: () -> None print_error("Duplicate class '{}'".format(name), state) continue - classes[name] = doc + classes[name] = (doc, cur_file) for name, data in classes.items(): try: - state.parse_class(data) + state.parse_class(data[0], data[1]) except Exception as e: print_error("Exception while parsing class '{}': {}".format(name, e), state) state.sort_classes() + pattern = re.compile(args.filter) + for class_name, class_def in state.classes.items(): + if args.filter and not pattern.search(class_def.filepath): + continue state.current_class = class_name make_rst_class(class_def, state, args.dry_run, args.output) diff --git a/doc/translations/README.md b/doc/translations/README.md new file mode 100644 index 0000000000..a941eeaf49 --- /dev/null +++ b/doc/translations/README.md @@ -0,0 +1 @@ +These `.po` and `.pot` files come from Weblate. Do not modify them manually. diff --git a/doc/translations/classes.pot b/doc/translations/classes.pot index 4cd89924ee..d14b0d9b1f 100644 --- a/doc/translations/classes.pot +++ b/doc/translations/classes.pot @@ -25583,7 +25583,7 @@ msgstr "" #: doc/classes/Input.xml:99 msgid "" "Returns the current value of the joypad axis at given index (see [enum " -"JoyAxisList])." +"JoyAxis])." msgstr "" #: doc/classes/Input.xml:108 @@ -25592,7 +25592,7 @@ msgstr "" #: doc/classes/Input.xml:117 msgid "" -"Receives a [enum JoyAxisList] axis and returns its equivalent name as a " +"Receives a [enum JoyAxis] axis and returns its equivalent name as a " "string." msgstr "" @@ -25602,7 +25602,7 @@ msgstr "" #: doc/classes/Input.xml:135 msgid "" -"Receives a gamepad button from [enum JoyButtonList] and returns its " +"Receives a gamepad button from [enum JoyButton] and returns its " "equivalent name as a string." msgstr "" @@ -25677,7 +25677,7 @@ msgstr "" #: doc/classes/Input.xml:238 msgid "" "Returns [code]true[/code] if you are pressing the joypad button (see [enum " -"JoyButtonList])." +"JoyButton])." msgstr "" #: doc/classes/Input.xml:247 @@ -26077,7 +26077,7 @@ msgid "" msgstr "" #: doc/classes/InputEventJoypadButton.xml:16 -msgid "Button identifier. One of the [enum JoyButtonList] button constants." +msgid "Button identifier. One of the [enum JoyButton] button constants." msgstr "" #: doc/classes/InputEventJoypadButton.xml:19 @@ -26105,7 +26105,7 @@ msgid "" msgstr "" #: doc/classes/InputEventJoypadMotion.xml:16 -msgid "Axis identifier. Use one of the [enum JoyAxisList] axis constants." +msgid "Axis identifier. Use one of the [enum JoyAxis] axis constants." msgstr "" #: doc/classes/InputEventJoypadMotion.xml:19 @@ -60259,7 +60259,7 @@ msgstr "" #: doc/classes/XRController3D.xml:65 msgid "" "Returns [code]true[/code] if the button at index [code]button[/code] is " -"pressed. See [enum JoyButtonList]." +"pressed. See [enum JoyButton]." msgstr "" #: doc/classes/XRController3D.xml:71 diff --git a/doc/translations/fr.po b/doc/translations/fr.po index c4fe08e67b..f3e26ebc61 100644 --- a/doc/translations/fr.po +++ b/doc/translations/fr.po @@ -25946,7 +25946,7 @@ msgstr "" #: doc/classes/Input.xml:99 msgid "" "Returns the current value of the joypad axis at given index (see [enum " -"JoyAxisList])." +"JoyAxis])." msgstr "" #: doc/classes/Input.xml:108 @@ -25955,7 +25955,7 @@ msgstr "" #: doc/classes/Input.xml:117 msgid "" -"Receives a [enum JoyAxisList] axis and returns its equivalent name as a " +"Receives a [enum JoyAxis] axis and returns its equivalent name as a " "string." msgstr "" @@ -25965,7 +25965,7 @@ msgstr "" #: doc/classes/Input.xml:135 msgid "" -"Receives a gamepad button from [enum JoyButtonList] and returns its " +"Receives a gamepad button from [enum JoyButton] and returns its " "equivalent name as a string." msgstr "" @@ -26041,7 +26041,7 @@ msgstr "" #, fuzzy msgid "" "Returns [code]true[/code] if you are pressing the joypad button (see [enum " -"JoyButtonList])." +"JoyButton])." msgstr "" "Retourne [code]true[/code] (vrai) si la chaîne de caractères finit par la " "chaîne de caractères donnée." @@ -26443,7 +26443,7 @@ msgid "" msgstr "" #: doc/classes/InputEventJoypadButton.xml:16 -msgid "Button identifier. One of the [enum JoyButtonList] button constants." +msgid "Button identifier. One of the [enum JoyButton] button constants." msgstr "" #: doc/classes/InputEventJoypadButton.xml:19 @@ -26471,7 +26471,7 @@ msgid "" msgstr "" #: doc/classes/InputEventJoypadMotion.xml:16 -msgid "Axis identifier. Use one of the [enum JoyAxisList] axis constants." +msgid "Axis identifier. Use one of the [enum JoyAxis] axis constants." msgstr "" #: doc/classes/InputEventJoypadMotion.xml:19 @@ -60738,7 +60738,7 @@ msgstr "" #, fuzzy msgid "" "Returns [code]true[/code] if the button at index [code]button[/code] is " -"pressed. See [enum JoyButtonList]." +"pressed. See [enum JoyButton]." msgstr "" "Renvoie [code]true[/code] (vrai) si [code]s[/code] vaut zéro ou quasiment " "zéro." |