diff options
Diffstat (limited to 'doc/translations/pt.po')
| -rw-r--r-- | doc/translations/pt.po | 365 |
1 files changed, 268 insertions, 97 deletions
diff --git a/doc/translations/pt.po b/doc/translations/pt.po index a755e40906..7ed938659a 100644 --- a/doc/translations/pt.po +++ b/doc/translations/pt.po @@ -1439,12 +1439,14 @@ msgstr "" "[/codeblock]" #: modules/gdscript/doc_classes/@GDScript.xml +#, fuzzy msgid "" -"Random range, any floating point value between [code]from[/code] and " -"[code]to[/code].\n" +"Returns a random floating point value between [code]from[/code] and " +"[code]to[/code] (both endpoints inclusive).\n" "[codeblock]\n" "prints(rand_range(0, 1), rand_range(0, 1)) # Prints e.g. 0.135591 0.405263\n" -"[/codeblock]" +"[/codeblock]\n" +"[b]Note:[/b] This is equivalent to [code]randf() * (to - from) + from[/code]." msgstr "" "Intervalo aleatório, retorna qualquer número real entre [code]from[/code] e " "[code]to[/code].\n" @@ -1517,37 +1519,36 @@ msgstr "" #: modules/gdscript/doc_classes/@GDScript.xml msgid "" -"Returns an array with the given range. Range can be 1 argument [code]N[/" -"code] (0 to [code]N[/code] - 1), two arguments ([code]initial[/code], " -"[code]final - 1[/code]) or three arguments ([code]initial[/code], " -"[code]final - 1[/code], [code]increment[/code]). Returns an empty array if " -"the range isn't valid (e.g. [code]range(2, 5, -1)[/code] or [code]range(5, " -"5, 1)[/code]).\n" -"Returns an array with the given range. [code]range()[/code] can have 1 " -"argument N ([code]0[/code] to [code]N - 1[/code]), two arguments " -"([code]initial[/code], [code]final - 1[/code]) or three arguments " -"([code]initial[/code], [code]final - 1[/code], [code]increment[/code]). " -"[code]increment[/code] can be negative. If [code]increment[/code] is " -"negative, [code]final - 1[/code] will become [code]final + 1[/code]. Also, " -"the initial value must be greater than the final value for the loop to run.\n" -"[codeblock]\n" -"print(range(4))\n" -"print(range(2, 5))\n" -"print(range(0, 6, 2))\n" -"[/codeblock]\n" -"Output:\n" +"Returns an array with the given range. [method range] can be called in three " +"ways:\n" +"[code]range(n: int)[/code]: Starts from 0, increases by steps of 1, and " +"stops [i]before[/i] [code]n[/code]. The argument [code]n[/code] is " +"[b]exclusive[/b].\n" +"[code]range(b: int, n: int)[/code]: Starts from [code]b[/code], increases by " +"steps of 1, and stops [i]before[/i] [code]n[/code]. The arguments [code]b[/" +"code] and [code]n[/code] are [b]inclusive[/b] and [b]exclusive[/b], " +"respectively.\n" +"[code]range(b: int, n: int, s: int)[/code]: Starts from [code]b[/code], " +"increases/decreases by steps of [code]s[/code], and stops [i]before[/i] " +"[code]n[/code]. The arguments [code]b[/code] and [code]n[/code] are " +"[b]inclusive[/b] and [b]exclusive[/b], respectively. The argument [code]s[/" +"code] [b]can[/b] be negative, but not [code]0[/code]. If [code]s[/code] is " +"[code]0[/code], an error message is printed.\n" +"[method range] converts all arguments to [int] before processing.\n" +"[b]Note:[/b] Returns an empty array if no value meets the value constraint " +"(e.g. [code]range(2, 5, -1)[/code] or [code]range(5, 5, 1)[/code]).\n" +"Examples:\n" "[codeblock]\n" -"[0, 1, 2, 3]\n" -"[2, 3, 4]\n" -"[0, 2, 4]\n" +"print(range(4)) # Prints [0, 1, 2, 3]\n" +"print(range(2, 5)) # Prints [2, 3, 4]\n" +"print(range(0, 6, 2)) # Prints [0, 2, 4]\n" +"print(range(4, 1, -1)) # Prints [4, 3, 2]\n" "[/codeblock]\n" "To iterate over an [Array] backwards, use:\n" "[codeblock]\n" "var array = [3, 6, 9]\n" -"var i := array.size() - 1\n" -"while i >= 0:\n" -" print(array[i])\n" -" i -= 1\n" +"for i in range(array.size(), 0, -1):\n" +" print(array[i - 1])\n" "[/codeblock]\n" "Output:\n" "[codeblock]\n" @@ -4878,17 +4879,25 @@ msgid "Maximum value for the mode enum." msgstr "" #: doc/classes/AnimatedSprite.xml -msgid "Sprite node that can use multiple textures for animation." +#, fuzzy +msgid "" +"Sprite node that contains multiple textures as frames to play for animation." msgstr "Nó Sprite que pode usar várias texturas para animação." #: doc/classes/AnimatedSprite.xml msgid "" -"Animations are created using a [SpriteFrames] resource, which can be " -"configured in the editor via the SpriteFrames panel.\n" -"[b]Note:[/b] You can associate a set of normal maps by creating additional " -"[SpriteFrames] resources with a [code]_normal[/code] suffix. For example, " -"having 2 [SpriteFrames] resources [code]run[/code] and [code]run_normal[/" -"code] will make it so the [code]run[/code] animation uses the normal map." +"[AnimatedSprite] is similar to the [Sprite] node, except it carries multiple " +"textures as animation frames. Animations are created using a [SpriteFrames] " +"resource, which allows you to import image files (or a folder containing " +"said files) to provide the animation frames for the sprite. The " +"[SpriteFrames] resource can be configured in the editor via the SpriteFrames " +"bottom panel.\n" +"[b]Note:[/b] You can associate a set of normal or specular maps by creating " +"additional [SpriteFrames] resources with a [code]_normal[/code] or " +"[code]_specular[/code] suffix. For example, having 3 [SpriteFrames] " +"resources [code]run[/code], [code]run_normal[/code], and [code]run_specular[/" +"code] will make it so the [code]run[/code] animation uses normal and " +"specular maps." msgstr "" #: doc/classes/AnimatedSprite.xml doc/classes/AnimationPlayer.xml @@ -4916,9 +4925,9 @@ msgstr "" msgid "Stops the current animation (does not reset the frame counter)." msgstr "" -#: doc/classes/AnimatedSprite.xml doc/classes/AnimatedSprite3D.xml +#: doc/classes/AnimatedSprite.xml msgid "" -"The current animation from the [code]frames[/code] resource. If this value " +"The current animation from the [member frames] resource. If this value " "changes, the [code]frame[/code] counter is reset." msgstr "" @@ -4942,9 +4951,12 @@ msgstr "Se [code]true[/code], a textura será invertida verticalmente." msgid "The displayed animation frame's index." msgstr "" -#: doc/classes/AnimatedSprite.xml doc/classes/AnimatedSprite3D.xml -msgid "The [SpriteFrames] resource containing the animation(s)." -msgstr "O recurso [SpriteFrames] que contém a(s) animação(ões)." +#: doc/classes/AnimatedSprite.xml +msgid "" +"The [SpriteFrames] resource containing the animation(s). Allows you the " +"option to load, edit, clear, make unique and save the states of the " +"[SpriteFrames] resource." +msgstr "" #: doc/classes/AnimatedSprite.xml doc/classes/Sprite.xml #: doc/classes/SpriteBase3D.xml @@ -4997,6 +5009,16 @@ msgid "" "provided, the current animation is played." msgstr "" +#: doc/classes/AnimatedSprite3D.xml +msgid "" +"The current animation from the [code]frames[/code] resource. If this value " +"changes, the [code]frame[/code] counter is reset." +msgstr "" + +#: doc/classes/AnimatedSprite3D.xml +msgid "The [SpriteFrames] resource containing the animation(s)." +msgstr "O recurso [SpriteFrames] que contém a(s) animação(ões)." + #: doc/classes/AnimatedTexture.xml msgid "Proxy texture for simple frame-based animations." msgstr "" @@ -5515,11 +5537,11 @@ msgstr "" msgid "No interpolation (nearest value)." msgstr "" -#: doc/classes/Animation.xml +#: doc/classes/Animation.xml doc/classes/Gradient.xml msgid "Linear interpolation." msgstr "Interpolação linear." -#: doc/classes/Animation.xml +#: doc/classes/Animation.xml doc/classes/Gradient.xml msgid "Cubic interpolation." msgstr "Interpolação cúbica." @@ -6564,7 +6586,10 @@ msgid "" "Seeks the animation to the [code]seconds[/code] point in time (in seconds). " "If [code]update[/code] is [code]true[/code], the animation updates too, " "otherwise it updates at process time. Events between the current frame and " -"[code]seconds[/code] are skipped." +"[code]seconds[/code] are skipped.\n" +"[b]Note:[/b] Seeking to the end of the animation doesn't emit [signal " +"animation_finished]. If you want to skip animation and emit the signal, use " +"[method advance]." msgstr "" #: doc/classes/AnimationPlayer.xml @@ -7755,7 +7780,10 @@ msgid "" "[code]0[/code]." msgstr "" -#: doc/classes/Array.xml +#: doc/classes/Array.xml doc/classes/PoolByteArray.xml +#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml +#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml +#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml msgid "Returns the number of times an element is in the array." msgstr "" @@ -7800,10 +7828,14 @@ msgid "" "[/codeblock]" msgstr "" -#: doc/classes/Array.xml +#: doc/classes/Array.xml doc/classes/PoolByteArray.xml +#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml +#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml +#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml msgid "" "Searches the array for a value and returns its index or [code]-1[/code] if " -"not found. Optionally, the initial search index can be passed." +"not found. Optionally, the initial search index can be passed. Returns " +"[code]-1[/code] if [code]from[/code] is out of bounds." msgstr "" #: doc/classes/Array.xml @@ -7941,11 +7973,15 @@ msgid "" "[code]null[/code]." msgstr "" -#: doc/classes/Array.xml +#: doc/classes/Array.xml doc/classes/PoolByteArray.xml +#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml +#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml +#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml msgid "" "Searches the array in reverse order. Optionally, a start search index can be " "passed. If negative, the start index is considered relative to the end of " -"the array." +"the array. If the adjusted start index is out of bounds, this method " +"searches from the end of the array." msgstr "" #: doc/classes/Array.xml @@ -9080,7 +9116,7 @@ msgstr "" msgid "" "Adds a new point at the given position with the given identifier. The " "[code]id[/code] must be 0 or larger, and the [code]weight_scale[/code] must " -"be 1 or larger.\n" +"be 0.0 or greater.\n" "The [code]weight_scale[/code] is multiplied by the result of [method " "_compute_cost] when determining the overall cost of traveling across a " "segment from a neighboring point to this point. Thus, all else being equal, " @@ -9302,7 +9338,7 @@ msgstr "" msgid "" "Adds a new point at the given position with the given identifier. The " "[code]id[/code] must be 0 or larger, and the [code]weight_scale[/code] must " -"be 1 or larger.\n" +"be 0.0 or greater.\n" "The [code]weight_scale[/code] is multiplied by the result of [method " "_compute_cost] when determining the overall cost of traveling across a " "segment from a neighboring point to this point. Thus, all else being equal, " @@ -12418,17 +12454,17 @@ msgstr "" #: doc/classes/Camera.xml msgid "" "Returns a normal vector in world space, that is the result of projecting a " -"point on the [Viewport] rectangle by the camera projection. This is useful " -"for casting rays in the form of (origin, normal) for object intersection or " -"picking." +"point on the [Viewport] rectangle by the inverse camera projection. This is " +"useful for casting rays in the form of (origin, normal) for object " +"intersection or picking." msgstr "" #: doc/classes/Camera.xml msgid "" "Returns a 3D position in world space, that is the result of projecting a " -"point on the [Viewport] rectangle by the camera projection. This is useful " -"for casting rays in the form of (origin, normal) for object intersection or " -"picking." +"point on the [Viewport] rectangle by the inverse camera projection. This is " +"useful for casting rays in the form of (origin, normal) for object " +"intersection or picking." msgstr "" #: doc/classes/Camera.xml @@ -14703,7 +14739,9 @@ msgstr "" #: doc/classes/CollisionPolygon2D.xml msgid "" "If [code]true[/code], only edges that face up, relative to " -"[CollisionPolygon2D]'s rotation, will collide with other objects." +"[CollisionPolygon2D]'s rotation, will collide with other objects.\n" +"[b]Note:[/b] This property has no effect if this [CollisionPolygon2D] is a " +"child of an [Area2D] node." msgstr "" #: doc/classes/CollisionPolygon2D.xml @@ -14800,7 +14838,9 @@ msgstr "" #: doc/classes/CollisionShape2D.xml msgid "" "Sets whether this collision shape should only detect collision on one side " -"(top or bottom)." +"(top or bottom).\n" +"[b]Note:[/b] This property has no effect if this [CollisionShape2D] is a " +"child of an [Area2D] node." msgstr "" #: doc/classes/CollisionShape2D.xml @@ -23230,6 +23270,11 @@ msgid "" "same behavior." msgstr "" +#: doc/classes/EditorSpinSlider.xml +#, fuzzy +msgid "If [code]true[/code], the slider is hidden." +msgstr "Se [code]true[/code], o áudio está sendo reproduzido." + #: doc/classes/EditorVCSInterface.xml msgid "" "Version Control System (VCS) interface, which reads and writes to the local " @@ -26819,9 +26864,22 @@ msgid "Gradient's colors returned as a [PoolColorArray]." msgstr "" #: doc/classes/Gradient.xml +msgid "" +"Defines how the colors between points of the gradient are interpolated. See " +"[enum InterpolationMode] for available modes." +msgstr "" + +#: doc/classes/Gradient.xml msgid "Gradient's offsets returned as a [PoolRealArray]." msgstr "" +#: doc/classes/Gradient.xml +msgid "" +"Constant interpolation, color changes abruptly at each point and stays " +"uniform between. This might cause visible aliasing when used for a gradient " +"texture in some cases." +msgstr "" + #: doc/classes/GradientTexture.xml msgid "Gradient-filled texture." msgstr "" @@ -35350,13 +35408,13 @@ msgid "" "interpolating. By default there's no delay." msgstr "" -#: doc/classes/MethodTweener.xml +#: doc/classes/MethodTweener.xml doc/classes/PropertyTweener.xml msgid "" "Sets the type of used easing from [enum Tween.EaseType]. If not set, the " "default easing is used from the [SceneTreeTween] that contains this Tweener." msgstr "" -#: doc/classes/MethodTweener.xml +#: doc/classes/MethodTweener.xml doc/classes/PropertyTweener.xml msgid "" "Sets the type of used transition from [enum Tween.TransitionType]. If not " "set, the default transition is used from the [SceneTreeTween] that contains " @@ -36063,6 +36121,12 @@ msgid "Creates the agent." msgstr "Retorna a escala." #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml +msgid "" +"Returns the navigation map [RID] the requested [code]agent[/code] is " +"currently assigned to." +msgstr "" + +#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml #, fuzzy msgid "Returns [code]true[/code] if the map got changed the previous frame." msgstr "Retorna [code]true[/code] se o script pode ser instanciado." @@ -36133,6 +36197,12 @@ msgid "Create a new map." msgstr "" #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml +msgid "" +"Returns all navigation agents [RID]s that are currently assigned to the " +"requested navigation [code]map[/code]." +msgstr "" + +#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml #, fuzzy msgid "Returns the map cell size." msgstr "Retorna o tamanho da textura." @@ -36160,6 +36230,12 @@ msgid "Returns the navigation path to reach the destination from the origin." msgstr "" #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml +msgid "" +"Returns all navigation regions [RID]s that are currently assigned to the " +"requested navigation [code]map[/code]." +msgstr "" + +#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml #, fuzzy msgid "Returns [code]true[/code] if the map is active." msgstr "Retorna [code]true[/code] se o script pode ser instanciado." @@ -36183,6 +36259,12 @@ msgid "Creates a new region." msgstr "" #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml +msgid "" +"Returns the navigation map [RID] the requested [code]region[/code] is " +"currently assigned to." +msgstr "" + +#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml #, fuzzy msgid "Sets the map for the region." msgstr "Define a cor da borda." @@ -36661,19 +36743,59 @@ msgid "Represents the size of the [enum SourceGeometryMode] enum." msgstr "" #: doc/classes/NavigationMeshGenerator.xml -msgid "This class is responsible for creating and clearing navigation meshes." +msgid "Helper class for creating and clearing navigation meshes." msgstr "" #: doc/classes/NavigationMeshGenerator.xml msgid "" -"Bakes the navigation mesh. This will allow you to use pathfinding with the " -"navigation system." +"This class is responsible for creating and clearing 3D navigation meshes " +"used as [NavigationMesh] resources inside [NavigationMeshInstance]. The " +"[NavigationMeshGenerator] has very limited to no use for 2D as the " +"navigation mesh baking process expects 3D node types and 3D source geometry " +"to parse.\n" +"The entire navigation mesh baking is best done in a separate thread as the " +"voxelization, collision tests and mesh optimization steps involved are very " +"performance and time hungry operations.\n" +"Navigation mesh baking happens in multiple steps and the result depends on " +"3D source geometry and properties of the [NavigationMesh] resource. In the " +"first step, starting from a root node and depending on [NavigationMesh] " +"properties all valid 3D source geometry nodes are collected from the " +"[SceneTree]. Second, all collected nodes are parsed for their relevant 3D " +"geometry data and a combined 3D mesh is build. Due to the many different " +"types of parsable objects, from normal [MeshInstance]s to [CSGShape]s or " +"various [CollisionObject]s, some operations to collect geometry data can " +"trigger [VisualServer] and [PhysicsServer] synchronizations. Server " +"synchronization can have a negative effect on baking time or framerate as it " +"often involves [Mutex] locking for thread security. Many parsable objects " +"and the continuous synchronization with other threaded Servers can increase " +"the baking time significantly. On the other hand only a few but very large " +"and complex objects will take some time to prepare for the Servers which can " +"noticeably stall the next frame render. As a general rule the total amount " +"of parsable objects and their individual size and complexity should be " +"balanced to avoid framerate issues or very long baking times. The combined " +"mesh is then passed to the Recast Navigation Object to test the source " +"geometry for walkable terrain suitable to [NavigationMesh] agent properties " +"by creating a voxel world around the meshes bounding area.\n" +"The finalized navigation mesh is then returned and stored inside the " +"[NavigationMesh] for use as a resource inside [NavigationMeshInstance] nodes." +msgstr "" + +#: doc/classes/NavigationMeshGenerator.xml +msgid "" +"Bakes navigation data to the provided [code]nav_mesh[/code] by parsing child " +"nodes under the provided [code]root_node[/code] or a specific group of nodes " +"for potential source geometry. The parse behavior can be controlled with the " +"[member NavigationMesh.geometry/parsed_geometry_type] and [member " +"NavigationMesh.geometry/source_geometry_mode] properties on the " +"[NavigationMesh] resource." msgstr "" #: doc/classes/NavigationMeshGenerator.xml #, fuzzy -msgid "Clears the navigation mesh." -msgstr "Limpa a seleção." +msgid "" +"Removes all polygons and vertices from the provided [code]nav_mesh[/code] " +"resource." +msgstr "Retorna o nome do nó em [code]idx[/code]." #: doc/classes/NavigationMeshInstance.xml msgid "An instance of a [NavigationMesh]." @@ -36693,7 +36815,10 @@ msgid "" "thread is useful because navigation baking is not a cheap operation. When it " "is completed, it automatically sets the new [NavigationMesh]. Please note " "that baking on separate thread may be very slow if geometry is parsed from " -"meshes as async access to each mesh involves heavy synchronization." +"meshes as async access to each mesh involves heavy synchronization. Also, " +"please note that baking on a separate thread is automatically disabled on " +"operating systems that cannot use threads (such as HTML5 with threads " +"disabled)." msgstr "" #: doc/classes/NavigationMeshInstance.xml @@ -36741,6 +36866,11 @@ msgid "" msgstr "" #: doc/classes/NavigationObstacle.xml +#, fuzzy +msgid "Returns the [RID] of this obstacle on the [NavigationServer]." +msgstr "Retorna o RID do ecrã usada por essa camada." + +#: doc/classes/NavigationObstacle.xml msgid "" "Sets the [Navigation] node used by the obstacle. Useful when you don't want " "to make the obstacle a child of a [Navigation] node." @@ -36777,6 +36907,11 @@ msgid "" msgstr "" #: doc/classes/NavigationObstacle2D.xml +#, fuzzy +msgid "Returns the [RID] of this obstacle on the [Navigation2DServer]." +msgstr "Retorna o RID do ecrã usada por essa camada." + +#: doc/classes/NavigationObstacle2D.xml msgid "" "Sets the [Navigation2D] node used by the obstacle. Useful when you don't " "want to make the obstacle a child of a [Navigation2D] node." @@ -37964,7 +38099,7 @@ msgstr "" #: doc/classes/Node.xml msgid "" "Returns [code]true[/code] if the physics interpolated flag is set for this " -"Node (see [method set_physics_interpolated]).\n" +"Node (see [member physics_interpolation_mode]).\n" "[b]Note:[/b] Interpolation will only be active is both the flag is set " "[b]and[/b] physics interpolation is enabled within the [SceneTree]. This can " "be tested using [method is_physics_interpolated_and_enabled]." @@ -37972,8 +38107,8 @@ msgstr "" #: doc/classes/Node.xml msgid "" -"Returns [code]true[/code] if physics interpolation is enabled (see [method " -"set_physics_interpolated]) [b]and[/b] enabled in the [SceneTree].\n" +"Returns [code]true[/code] if physics interpolation is enabled (see [member " +"physics_interpolation_mode]) [b]and[/b] enabled in the [SceneTree].\n" "This is a convenience version of [method is_physics_interpolated] that also " "checks whether physics interpolation is enabled globally.\n" "See [member SceneTree.physics_interpolation] and [member ProjectSettings." @@ -38267,14 +38402,6 @@ msgstr "" #: doc/classes/Node.xml msgid "" -"Enables or disables physics interpolation per node, offering a finer grain " -"of control than turning physics interpolation on and off globally.\n" -"[b]Note:[/b] This can be especially useful for [Camera]s, where custom " -"interpolation can sometimes give superior results." -msgstr "" - -#: doc/classes/Node.xml -msgid "" "Enables or disables physics (i.e. fixed framerate) processing. When a node " "is being processed, it will receive a [constant " "NOTIFICATION_PHYSICS_PROCESS] at a fixed (usually 60 FPS, see [member Engine." @@ -38407,6 +38534,15 @@ msgstr "" #: doc/classes/Node.xml msgid "" +"Allows enabling or disabling physics interpolation per node, offering a " +"finer grain of control than turning physics interpolation on and off " +"globally.\n" +"[b]Note:[/b] This can be especially useful for [Camera]s, where custom " +"interpolation can sometimes give superior results." +msgstr "" + +#: doc/classes/Node.xml +msgid "" "The node's priority in the execution order of the enabled processing " "callbacks (i.e. [constant NOTIFICATION_PROCESS], [constant " "NOTIFICATION_PHYSICS_PROCESS] and their internal counterparts). Nodes whose " @@ -38568,6 +38704,24 @@ msgid "Continue to process regardless of the [SceneTree] pause state." msgstr "" #: doc/classes/Node.xml +msgid "" +"Inherits physics interpolation mode from the node's parent. For the root " +"node, it is equivalent to [constant PHYSICS_INTERPOLATION_MODE_ON]. Default." +msgstr "" + +#: doc/classes/Node.xml +msgid "" +"Turn off physics interpolation in this node and children set to [constant " +"PHYSICS_INTERPOLATION_MODE_INHERIT]." +msgstr "" + +#: doc/classes/Node.xml +msgid "" +"Turn on physics interpolation in this node and children set to [constant " +"PHYSICS_INTERPOLATION_MODE_INHERIT]." +msgstr "" + +#: doc/classes/Node.xml msgid "Duplicate the node's signals." msgstr "" @@ -39809,7 +39963,7 @@ msgstr "Retorna o tipo do nó em at [code]idx[/code]." #: doc/classes/OptionButton.xml msgid "" -"Returns the ID of the selected item, or [code]0[/code] if no item is " +"Returns the ID of the selected item, or [code]-1[/code] if no item is " "selected." msgstr "" @@ -39831,7 +39985,8 @@ msgstr "" #: doc/classes/OptionButton.xml msgid "" "Selects an item by index and makes it the current item. This will work even " -"if the item is disabled." +"if the item is disabled.\n" +"Passing [code]-1[/code] as the index deselects any currently selected item." msgstr "" #: doc/classes/OptionButton.xml @@ -45162,6 +45317,15 @@ msgid "" "should always be preferred." msgstr "" +#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml +#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml +#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml +#: doc/classes/PoolVector3Array.xml +msgid "" +"Returns [code]true[/code] if the array contains the given value.\n" +"[b]Note:[/b] This is equivalent to using the [code]in[/code] operator." +msgstr "" + #: doc/classes/PoolByteArray.xml msgid "" "Returns a hexadecimal representation of this array as a [String].\n" @@ -45956,6 +46120,11 @@ msgid "[Font] used for the menu items." msgstr "" #: doc/classes/PopupMenu.xml +#, fuzzy +msgid "[Font] used for the labeled separator." +msgstr "Não há sugestão para a propriedade editada." + +#: doc/classes/PopupMenu.xml msgid "[Texture] icon for the checked checkbox items." msgstr "" @@ -49402,19 +49571,6 @@ msgid "" "interpolating. By default there's no delay." msgstr "" -#: doc/classes/PropertyTweener.xml -msgid "" -"Sets the type of used easing from [enum Tween.EaseType]. If not set, the " -"default easing is used from the [Tween] that contains this Tweener." -msgstr "" - -#: doc/classes/PropertyTweener.xml -msgid "" -"Sets the type of used transition from [enum Tween.TransitionType]. If not " -"set, the default transition is used from the [Tween] that contains this " -"Tweener." -msgstr "" - #: doc/classes/ProximityGroup.xml msgid "General-purpose 3D proximity detection node." msgstr "" @@ -54248,8 +54404,15 @@ msgstr "" #: doc/classes/Shape2D.xml msgid "" -"Returns a list of the points where this shape touches another. If there are " -"no collisions the list is empty.\n" +"Returns a list of contact point pairs where this shape touches another.\n" +"If there are no collisions, the returned list is empty. Otherwise, the " +"returned list contains contact points arranged in pairs, with entries " +"alternating between points on the boundary of this shape and points on the " +"boundary of [code]with_shape[/code].\n" +"A collision pair A, B can be used to calculate the collision normal with " +"[code](B - A).normalized()[/code], and the collision depth with [code](B - " +"A).length()[/code]. This information is typically used to separate shapes, " +"particularly in collision solvers.\n" "This method needs the transformation matrix for this shape " "([code]local_xform[/code]), the shape to check collisions with " "([code]with_shape[/code]), and the transformation matrix of that shape " @@ -54270,8 +54433,16 @@ msgstr "" #: doc/classes/Shape2D.xml msgid "" -"Returns a list of the points where this shape would touch another, if a " -"given movement was applied. If there are no collisions the list is empty.\n" +"Returns a list of contact point pairs where this shape would touch another, " +"if a given movement was applied.\n" +"If there would be no collisions, the returned list is empty. Otherwise, the " +"returned list contains contact points arranged in pairs, with entries " +"alternating between points on the boundary of this shape and points on the " +"boundary of [code]with_shape[/code].\n" +"A collision pair A, B can be used to calculate the collision normal with " +"[code](B - A).normalized()[/code], and the collision depth with [code](B - " +"A).length()[/code]. This information is typically used to separate shapes, " +"particularly in collision solvers.\n" "This method needs the transformation matrix for this shape " "([code]local_xform[/code]), the movement to test on this shape " "([code]local_motion[/code]), the shape to check collisions with " |