diff options
Diffstat (limited to 'doc/translations/ja.po')
| -rw-r--r-- | doc/translations/ja.po | 578 |
1 files changed, 398 insertions, 180 deletions
diff --git a/doc/translations/ja.po b/doc/translations/ja.po index fe76c741d0..0e49cb321e 100644 --- a/doc/translations/ja.po +++ b/doc/translations/ja.po @@ -814,6 +814,7 @@ msgstr "" "[/codeblock]" #: modules/gdscript/doc_classes/@GDScript.xml +#, fuzzy msgid "" "Returns an interpolation or extrapolation factor considering the range " "specified in [code]from[/code] and [code]to[/code], and the interpolated " @@ -821,8 +822,9 @@ msgid "" "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between " "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is " "located outside this range, then an extrapolation factor will be returned " -"(return value lower than [code]0.0[/code] or greater than [code]1.0[/" -"code]).\n" +"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). " +"Use [method clamp] on the result of [method inverse_lerp] if this is not " +"desired.\n" "[codeblock]\n" "# The interpolation ratio in the `lerp()` call below is 0.75.\n" "var middle = lerp(20, 30, 0.75)\n" @@ -832,7 +834,8 @@ msgid "" "var ratio = inverse_lerp(20, 30, 27.5)\n" "# `ratio` is now 0.75.\n" "[/codeblock]\n" -"See also [method lerp] which performs the reverse of this operation." +"See also [method lerp] which performs the reverse of this operation, and " +"[method range_lerp] to map a continuous series of values to another." msgstr "" "[code]from[/code] と [code]to[/code] で指定された範囲と、[code]weight[/code] " "で指定された補間値を考慮した、補間または外挿の係数を返します。[code]weight[/" @@ -918,12 +921,14 @@ msgstr "" "[/codeblock]" #: modules/gdscript/doc_classes/@GDScript.xml +#, fuzzy msgid "" "Linearly interpolates between two values by the factor defined in " "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be " "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values " "outside this range are allowed and can be used to perform [i]extrapolation[/" -"i].\n" +"i]. Use [method clamp] on the result of [method lerp] if this is not " +"desired.\n" "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or " "[float], the return value is a [float].\n" "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the " @@ -935,7 +940,8 @@ msgid "" "[/codeblock]\n" "See also [method inverse_lerp] which performs the reverse of this operation. " "To perform eased interpolation with [method lerp], combine it with [method " -"ease] or [method smoothstep]." +"ease] or [method smoothstep]. See also [method range_lerp] to map a " +"continuous series of values to another." msgstr "" "２つの値および正規化された値から線形補間します。これは [method inverse_lerp] " "の逆です。\n" @@ -1598,16 +1604,16 @@ msgstr "" #: modules/gdscript/doc_classes/@GDScript.xml msgid "" "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]" -"[ostart, ostop][/code].\n" +"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If " +"[code]value[/code] is outside [code][istart, istop][/code], then the " +"resulting value will also be outside [code][ostart, ostop][/code]. Use " +"[method clamp] on the result of [method range_lerp] if this is not desired.\n" "[codeblock]\n" "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n" -"[/codeblock]" +"[/codeblock]\n" +"For complex use cases where you need multiple ranges, consider using [Curve] " +"or [Gradient] instead." msgstr "" -"範囲 [code][istart, istop][/code] の値 [code]value[/code] を、範囲 [code]" -"[ostart, ostop][/code] へとマップします。\n" -"[codeblock]\n" -"range_lerp(75, 0, 100, -1, 1) # 0.5 と返す\n" -"[/codeblock]" #: modules/gdscript/doc_classes/@GDScript.xml #, fuzzy @@ -6218,24 +6224,22 @@ msgstr "" "合にのみ有用で、そうでなければエディタは追加用ノードを表示しません。" #: doc/classes/AnimationNode.xml -msgid "Gets the text caption for this node (used by some editors)." -msgstr "このノードのテキストキャプションを取得します (特定のエディタで使用)。" +msgid "" +"When inheriting from [AnimationRootNode], implement this virtual method to " +"override the text caption for this node." +msgstr "" #: doc/classes/AnimationNode.xml msgid "" -"Gets a child node by index (used by editors inheriting from " -"[AnimationRootNode])." +"When inheriting from [AnimationRootNode], implement this virtual method to " +"return a child node by its [code]name[/code]." msgstr "" -"子ノードをインデックスで取得します ([AnimationRootNode] を継承したエディタで" -"使用)。" #: doc/classes/AnimationNode.xml msgid "" -"Gets all children nodes in order as a [code]name: node[/code] dictionary. " -"Only useful when inheriting [AnimationRootNode]." +"When inheriting from [AnimationRootNode], implement this virtual method to " +"return all children nodes in order as a [code]name: node[/code] dictionary." msgstr "" -"すべての子ノードを順番通りに [code]name: node[/code] の辞書として取得します。" -"[AnimationRootNode] を継承する場合にのみ有用です。" #: doc/classes/AnimationNode.xml msgid "" @@ -6256,16 +6260,21 @@ msgstr "" "ローカルメモリで、与えられたリソースは複数のツリーで再利用できます。" #: doc/classes/AnimationNode.xml +#, fuzzy msgid "" -"Gets the default value of a parameter. Parameters are custom local memory " -"used for your nodes, given a resource can be reused in multiple trees." +"When inheriting from [AnimationRootNode], implement this virtual method to " +"return the default value of parameter \"[code]name[/code]\". Parameters are " +"custom local memory used for your nodes, given a resource can be reused in " +"multiple trees." msgstr "" "特定のパラメータのデフォルト値を取得します。パラメータはノードに使用されるカ" "スタムのローカルメモリで、与えられたリソースは複数のツリーで再利用できます。" #: doc/classes/AnimationNode.xml +#, fuzzy msgid "" -"Gets the property information for parameter. Parameters are custom local " +"When inheriting from [AnimationRootNode], implement this virtual method to " +"return a list of the properties on this node. Parameters are custom local " "memory used for your nodes, given a resource can be reused in multiple " "trees. Format is similar to [method Object.get_property_list]." msgstr "" @@ -6274,9 +6283,11 @@ msgstr "" "す。フォーマットは [method Object.get_property_list] に似ています。" #: doc/classes/AnimationNode.xml +#, fuzzy msgid "" -"Returns [code]true[/code] whether you want the blend tree editor to display " -"filter editing on this node." +"When inheriting from [AnimationRootNode], implement this virtual method to " +"return whether the blend tree editor should display filter editing on this " +"node." msgstr "" "このノードで編集するフィルターを、ブレンドツリーエディタにて表示させたい場合" "は [code]true[/code] を返すようにします。" @@ -6288,10 +6299,12 @@ msgstr "" "指定したパスがフィルタリングされていれば [code]true[/code] を返します。" #: doc/classes/AnimationNode.xml +#, fuzzy msgid "" -"User-defined callback called when a custom node is processed. The " -"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is " -"[code]true[/code], in which case it is absolute.\n" +"When inheriting from [AnimationRootNode], implement this virtual method to " +"run some code when this node is processed. The [code]time[/code] parameter " +"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which " +"case it is absolute.\n" "Here, call the [method blend_input], [method blend_node] or [method " "blend_animation] functions. You can also use [method get_parameter] and " "[method set_parameter] to modify local memory.\n" @@ -7089,9 +7102,9 @@ msgid "" "Turn on auto advance when this condition is set. The provided name will " "become a boolean parameter on the [AnimationTree] that can be controlled " "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree." -"html#controlling-from-code][/url]). For example, if [member AnimationTree." -"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] " -"is set to [code]\"idle\"[/code]:\n" +"html#controlling-from-code]Using AnimationTree[/url]). For example, if " +"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and " +"[member advance_condition] is set to [code]\"idle\"[/code]:\n" "[codeblock]\n" "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and " "(linear_velocity.x == 0)\n" @@ -7314,9 +7327,10 @@ msgstr "" "[code]animation[/code] の名前を返します。もし無ければ、空の文字列を返します。" #: doc/classes/AnimationPlayer.xml +#, fuzzy msgid "" -"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if " -"not found." +"Returns the [Animation] with the key [code]name[/code]. If the animation " +"does not exist, [code]null[/code] is returned and an error is logged." msgstr "" "キー [code]name[/code] を持つ [Animation] を返すか、見つからない場合は " "[code]null[/code] を返します。" @@ -11197,8 +11211,9 @@ msgstr "" "オーディオバスの基底リソース。リソースが適用されているバスに対し、オーディオ" "エフェクトを適用します。" -#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml -#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml +#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml +#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml +#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml #: doc/classes/AudioStreamPlayer.xml msgid "Audio Mic Record Demo" msgstr "" @@ -11258,10 +11273,20 @@ msgid "" "attached audio effect bus into its internal ring buffer.\n" "Application code should consume these audio frames from this ring buffer " "using [method get_buffer] and process it as needed, for example to capture " -"data from a microphone, implement application defined effects, or to " -"transmit audio over the network. When capturing audio data from a " +"data from an [AudioStreamMicrophone], implement application-defined effects, " +"or to transmit audio over the network. When capturing audio data from a " "microphone, the format of the samples will be stereo 32-bit floating point " -"PCM." +"PCM.\n" +"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be " +"[code]true[/code] for audio input to work. See also that setting's " +"description for caveats related to permissions and operating system privacy " +"settings." +msgstr "" + +#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml +#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml +#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml +msgid "Audio buses" msgstr "" #: doc/classes/AudioEffectCapture.xml @@ -11560,12 +11585,6 @@ msgstr "" "「耳ざわり」になります。ゲームにおいては、水没した機器やスピーカーが出すよう" "な音を非常に効率的にシミュレートすることができます。" -#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml -#: doc/classes/AudioEffectHighShelfFilter.xml -#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml -msgid "Audio buses" -msgstr "" - #: doc/classes/AudioEffectDistortion.xml msgid "Distortion power. Value can range from 0 to 1." msgstr "歪みの強さ。値の範囲は0～1です。" @@ -12252,8 +12271,13 @@ msgstr "" "フェクトを追加します。" #: doc/classes/AudioServer.xml -msgid "Returns the names of all audio input devices detected on the system." -msgstr "システム上で検出されたすべてのオーディオ入力デバイスの名前を返します。" +msgid "" +"Returns the names of all audio input devices detected on the system.\n" +"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be " +"[code]true[/code] for audio input to work. See also that setting's " +"description for caveats related to permissions and operating system privacy " +"settings." +msgstr "" #: doc/classes/AudioServer.xml msgid "Generates an [AudioBusLayout] using the available buses and effects." @@ -12444,12 +12468,16 @@ msgstr "利用可能なオーディオバスの数。" #: doc/classes/AudioServer.xml msgid "" -"Name of the current device for audio input (see [method get_device_list]). " -"On systems with multiple audio inputs (such as analog, USB and HDMI audio), " -"this can be used to select the audio input device. The value " -"[code]\"Default\"[/code] will record audio on the system-wide default audio " -"input. If an invalid device name is set, the value will be reverted back to " -"[code]\"Default\"[/code]." +"Name of the current device for audio input (see [method " +"capture_get_device_list]). On systems with multiple audio inputs (such as " +"analog, USB and HDMI audio), this can be used to select the audio input " +"device. The value [code]\"Default\"[/code] will record audio on the system-" +"wide default audio input. If an invalid device name is set, the value will " +"be reverted back to [code]\"Default\"[/code].\n" +"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be " +"[code]true[/code] for audio input to work. See also that setting's " +"description for caveats related to permissions and operating system privacy " +"settings." msgstr "" #: doc/classes/AudioServer.xml @@ -12607,6 +12635,21 @@ msgid "" "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript." msgstr "" +#: doc/classes/AudioStreamMicrophone.xml +msgid "Plays real-time audio input data." +msgstr "" + +#: doc/classes/AudioStreamMicrophone.xml +msgid "" +"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] " +"plays back microphone input in real-time. This can be used in conjunction " +"with [AudioEffectCapture] to process the data or save it.\n" +"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be " +"[code]true[/code] for audio input to work. See also that setting's " +"description for caveats related to permissions and operating system privacy " +"settings." +msgstr "" + #: modules/minimp3/doc_classes/AudioStreamMP3.xml #, fuzzy msgid "MP3 audio stream driver." @@ -12762,7 +12805,10 @@ msgstr "3D空間で3Dサウンドを再生します。" #: doc/classes/AudioStreamPlayer2D.xml msgid "" -"Plays audio that dampens with distance from screen center.\n" +"Plays audio that dampens with distance from a given position.\n" +"By default, audio is heard from the screen center. This can be changed by " +"adding a [Listener2D] node to the scene and enabling it by calling [method " +"Listener2D.make_current] on it.\n" "See also [AudioStreamPlayer] to play a sound non-positionally.\n" "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio " "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set " @@ -14686,7 +14732,7 @@ msgid "" "Sets the camera projection to frustum mode (see [constant " "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/" "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in " -"world space units." +"world space units. See also [member frustum_offset]." msgstr "" #: doc/classes/Camera.xml @@ -14779,7 +14825,9 @@ msgstr "" msgid "" "The camera's frustum offset. This can be changed from the default to create " "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-" -"shearing[/url]." +"shearing[/url].\n" +"[b]Note:[/b] Only effective if [member projection] is [constant " +"PROJECTION_FRUSTUM]." msgstr "" #: doc/classes/Camera.xml @@ -14807,9 +14855,9 @@ msgstr "" #: doc/classes/Camera.xml msgid "" -"The camera's size measured as 1/2 the width or height. Only applicable in " -"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, " -"[code]size[/code] sets the other axis' size length." +"The camera's size in meters measured as the diameter of the width or height, " +"depending on [member keep_aspect]. Only applicable in orthogonal and frustum " +"modes." msgstr "" #: doc/classes/Camera.xml @@ -15319,13 +15367,14 @@ msgid "" "inherit and extend their parent's transform. [CanvasItem] is extended by " "[Control] for anything GUI-related, and by [Node2D] for anything related to " "the 2D engine.\n" -"Any [CanvasItem] can draw. For this, [method update] must be called, then " -"[constant NOTIFICATION_DRAW] will be received on idle time to request " -"redraw. Because of this, canvas items don't need to be redrawn on every " -"frame, improving the performance significantly. Several functions for " +"Any [CanvasItem] can draw. For this, [method update] is called by the " +"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to " +"request redraw. Because of this, canvas items don't need to be redrawn on " +"every frame, improving the performance significantly. Several functions for " "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] " -"functions). However, they can only be used inside the [method Object." -"_notification], signal or [method _draw] virtual functions.\n" +"functions). However, they can only be used inside [method _draw], its " +"corresponding [method Object._notification] or methods connected to the " +"[signal draw] signal.\n" "Canvas items are drawn in tree order. By default, children are on top of " "their parents so a root [CanvasItem] will be drawn behind everything. This " "behavior can be changed on a per-item basis.\n" @@ -15351,8 +15400,10 @@ msgstr "" #: doc/classes/CanvasItem.xml msgid "" -"Overridable function called by the engine (if defined) to draw the canvas " -"item." +"Called when [CanvasItem] has been requested to redraw (when [method update] " +"is called, either manually or by the engine).\n" +"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method " +"Object._notification]." msgstr "" #: doc/classes/CanvasItem.xml @@ -15668,12 +15719,12 @@ msgid "" "to children." msgstr "" -#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml +#: doc/classes/CanvasItem.xml msgid "" "Returns [code]true[/code] if the node is present in the [SceneTree], its " "[member visible] property is [code]true[/code] and all its antecedents are " "also visible. If any antecedent is hidden, this node will not be visible in " -"the scene tree." +"the scene tree, and is consequently not drawn (see [method _draw])." msgstr "" #: doc/classes/CanvasItem.xml @@ -15718,8 +15769,10 @@ msgstr "" #: doc/classes/CanvasItem.xml msgid "" -"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be " -"called on idle time to request redraw." +"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is " +"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. " +"This only occurs [b]once[/b] per frame, even if this method has been called " +"multiple times." msgstr "" #: doc/classes/CanvasItem.xml @@ -15767,8 +15820,11 @@ msgstr "" #: doc/classes/CanvasItem.xml msgid "" -"Emitted when the [CanvasItem] must redraw. This can only be connected " -"realtime, as deferred will not allow drawing." +"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related " +"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] " +"is called.\n" +"[b]Note:[/b] Deferred connections do not allow drawing through the " +"[code]draw_*[/code] methods." msgstr "" #: doc/classes/CanvasItem.xml @@ -15830,7 +15886,7 @@ msgid "" msgstr "" #: doc/classes/CanvasItem.xml -msgid "The [CanvasItem] is requested to draw." +msgid "The [CanvasItem] is requested to draw (see [method _draw])." msgstr "" #: doc/classes/CanvasItem.xml @@ -15967,7 +16023,10 @@ msgstr "" #: doc/classes/CanvasLayer.xml msgid "" -"Sets the layer to follow the viewport in order to simulate a pseudo 3D " +"If enabled, the [CanvasLayer] will use the viewport's transform, so it will " +"move when camera moves instead of being anchored in a fixed position on the " +"screen.\n" +"Together with [member follow_viewport_scale] it can be used for a pseudo 3D " "effect." msgstr "" @@ -19020,7 +19079,9 @@ msgstr "" #: doc/classes/Control.xml msgid "" "Steal the focus from another control and become the focused control (see " -"[member focus_mode])." +"[member focus_mode]).\n" +"[b]Note[/b]: Using this method together with [method Object.call_deferred] " +"makes it more reliable, especially when called inside [method Node._ready]." msgstr "" #: doc/classes/Control.xml @@ -21826,7 +21887,9 @@ msgstr "" msgid "" "A curve that can be saved and re-used for other objects. By default, it " "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions " -"points relative to the [code]0.5[/code] Y position." +"points relative to the [code]0.5[/code] Y position.\n" +"See also [Gradient] which is designed for color interpolation. See also " +"[Curve2D] and [Curve3D]." msgstr "" #: doc/classes/Curve.xml @@ -21975,16 +22038,17 @@ msgid "" "further calculations." msgstr "" -#: doc/classes/Curve2D.xml +#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml msgid "" -"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s " -"position, with control points [code]in[/code] and [code]out[/code].\n" -"If [code]at_position[/code] is given, the point is inserted before the point " -"number [code]at_position[/code], moving that point (and every point after) " -"after the inserted point. If [code]at_position[/code] is not given, or is an " -"illegal value ([code]at_position <0[/code] or [code]at_position >= [method " -"get_point_count][/code]), the point will be appended at the end of the point " -"list." +"Adds a point with the specified [code]position[/code] relative to the " +"curve's own position, with control points [code]in[/code] and [code]out[/" +"code]. Appends the new point at the end of the point list.\n" +"If [code]index[/code] is given, the new point is inserted before the " +"existing point identified by index [code]index[/code]. Every existing point " +"starting from [code]index[/code] is shifted further down the list of points. " +"The index must be greater than or equal to [code]0[/code] and must not " +"exceed the number of existing points in the line. See [method " +"get_point_count]." msgstr "" #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml @@ -22130,18 +22194,6 @@ msgid "" msgstr "" #: doc/classes/Curve3D.xml -msgid "" -"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s " -"position, with control points [code]in[/code] and [code]out[/code].\n" -"If [code]at_position[/code] is given, the point is inserted before the point " -"number [code]at_position[/code], moving that point (and every point after) " -"after the inserted point. If [code]at_position[/code] is not given, or is an " -"illegal value ([code]at_position <0[/code] or [code]at_position >= [method " -"get_point_count][/code]), the point will be appended at the end of the point " -"list." -msgstr "" - -#: doc/classes/Curve3D.xml #, fuzzy msgid "Returns the cache of points as a [PoolVector3Array]." msgstr "ブレンド軸上のポイントの数を返します。" @@ -27092,8 +27144,12 @@ msgstr "" #: doc/classes/File.xml msgid "" -"Returns the whole file as a [String].\n" -"Text is interpreted as being UTF-8 encoded." +"Returns the whole file as a [String]. Text is interpreted as being UTF-8 " +"encoded.\n" +"If [code]skip_cr[/code] is [code]true[/code], carriage return characters " +"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only " +"line feed characters ([code]\\n[/code], LF) represent a new line (Unix " +"convention)." msgstr "" #: doc/classes/File.xml @@ -27716,7 +27772,9 @@ msgid "" "[code]next[/code] is passed. clipping the width. [code]position[/code] " "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] " "must be added to the Y axis. The width used by the character is returned, " -"making this function useful for drawing strings character by character." +"making this function useful for drawing strings character by character.\n" +"If [code]outline[/code] is [code]true[/code], the outline of the character " +"is drawn instead of the character itself." msgstr "" #: doc/classes/Font.xml @@ -29324,10 +29382,13 @@ msgstr "" #: doc/classes/Gradient.xml msgid "" "Given a set of colors, this resource will interpolate them in order. This " -"means that if you have color 1, color 2 and color 3, the ramp will " -"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp " -"will initially have 2 colors (black and white), one (black) at ramp lower " -"offset 0 and the other (white) at the ramp higher offset 1." +"means that if you have color 1, color 2 and color 3, the gradient will " +"interpolate from color 1 to color 2 and from color 2 to color 3. The " +"gradient will initially have 2 colors (black and white), one (black) at " +"gradient lower offset 0 and the other (white) at the gradient higher offset " +"1.\n" +"See also [Curve] which supports more complex easing methods, but does not " +"support colors." msgstr "" #: doc/classes/Gradient.xml @@ -30766,8 +30827,8 @@ msgstr "" msgid "" "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used " "to make HTTP requests to download web content, upload files and other data " -"or to communicate with various services, among other use cases. [b]See the " -"[HTTPRequest] node for a higher-level alternative.[/b]\n" +"or to communicate with various services, among other use cases.\n" +"See the [HTTPRequest] node for a higher-level alternative.\n" "[b]Note:[/b] This client only needs to connect to a host once (see [method " "connect_to_host]) to send multiple requests. Because of this, methods that " "take URLs usually take just the part after the host instead of the full URL, " @@ -33078,11 +33139,14 @@ msgstr "" #: doc/classes/Input.xml msgid "" -"Vibrate Android and iOS devices.\n" +"Vibrate handheld devices.\n" +"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n" "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] " "permission in the export preset.\n" "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and " -"later." +"later.\n" +"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not " +"support this method." msgstr "" #: doc/classes/Input.xml @@ -33934,7 +33998,11 @@ msgstr "" #: doc/classes/InstancePlaceholder.xml msgid "" -"Not thread-safe. Use [method Object.call_deferred] if calling from a thread." +"Call this method to actually load in the node. The created node will be " +"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene " +"tree. The [Node]'s reference is also returned for convenience.\n" +"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object." +"call_deferred] if calling from a thread." msgstr "" #: doc/classes/InstancePlaceholder.xml @@ -33946,6 +34014,16 @@ msgstr "" #: doc/classes/InstancePlaceholder.xml msgid "" +"Returns the list of properties that will be applied to the node when [method " +"create_instance] is called.\n" +"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/" +"code] (note the leading period) is added to the dictionary. This [code]." +"order[/code] key is an [Array] of [String] property names specifying the " +"order in which properties will be applied (with index 0 being the first)." +msgstr "" + +#: doc/classes/InstancePlaceholder.xml +msgid "" "Replaces this placeholder by the scene handed as an argument, or the " "original scene if no argument is given. As for all resources, the scene is " "loaded only if it's not loaded already. By manually loading the scene " @@ -36376,14 +36454,14 @@ msgstr "" #: doc/classes/Line2D.xml msgid "" -"Adds a point at the [code]position[/code]. Appends the point at the end of " -"the line.\n" -"If [code]at_position[/code] is given, the point is inserted before the point " -"number [code]at_position[/code], moving that point (and every point after) " -"after the inserted point. If [code]at_position[/code] is not given, or is an " -"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method " -"get_point_count][/code]), the point will be appended at the end of the point " -"list." +"Adds a point with the specified [code]position[/code] relative to the line's " +"own position. Appends the new point at the end of the point list.\n" +"If [code]index[/code] is given, the new point is inserted before the " +"existing point identified by index [code]index[/code]. Every existing point " +"starting from [code]index[/code] is shifted further down the list of points. " +"The index must be greater than or equal to [code]0[/code] and must not " +"exceed the number of existing points in the line. See [method " +"get_point_count]." msgstr "" #: doc/classes/Line2D.xml @@ -36391,22 +36469,29 @@ msgid "Removes all points from the line." msgstr "" #: doc/classes/Line2D.xml -msgid "Returns the Line2D's amount of points." -msgstr "" +#, fuzzy +msgid "Returns the amount of points in the line." +msgstr "アニメーションのトラック数を返します。" #: doc/classes/Line2D.xml -msgid "Returns point [code]i[/code]'s position." -msgstr "" +#, fuzzy +msgid "Returns the position of the point at index [code]index[/code]." +msgstr "インデックス [code]point[/code] のポイントの位置を返します。" #: doc/classes/Line2D.xml -msgid "Removes the point at index [code]i[/code] from the line." +#, fuzzy +msgid "Removes the point at index [code]index[/code] from the line." msgstr "" +"ブレンド空間からインデックス [code]point[/code] のポイントを削除します。" #: doc/classes/Line2D.xml +#, fuzzy msgid "" -"Overwrites the position in point [code]i[/code] with the supplied " -"[code]position[/code]." +"Overwrites the position of the point at index [code]index[/code] with the " +"supplied [code]position[/code]." msgstr "" +"インデックス [code]triangle[/code] の三角形内にある、インデックス " +"[code]point[/code] のポイントの位置を返します。" #: doc/classes/Line2D.xml msgid "" @@ -37986,9 +38071,9 @@ msgid "" "MeshInstance is a node that takes a [Mesh] resource and adds it to the " "current scenario by creating an instance of it. This is the class most often " "used to get 3D geometry rendered and can be used to instance a single [Mesh] " -"in many places. This allows to reuse geometry and save on resources. When a " -"[Mesh] has to be instanced more than thousands of times at close proximity, " -"consider using a [MultiMesh] in a [MultiMeshInstance] instead." +"in many places. This allows reusing geometry, which can save on resources. " +"When a [Mesh] has to be instanced more than thousands of times at close " +"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead." msgstr "" #: doc/classes/MeshInstance.xml @@ -38456,7 +38541,9 @@ msgid "" "existing vertex colors.\n" "For the color to take effect, ensure that [member color_format] is non-" "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial." -"vertex_color_use_as_albedo] is [code]true[/code] on the material." +"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the " +"color doesn't look as expected, make sure the material's albedo color is set " +"to pure white ([code]Color(1, 1, 1)[/code])." msgstr "" #: doc/classes/MultiMesh.xml @@ -39618,7 +39705,7 @@ msgstr "" #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml msgid "" "Notifies when the collision avoidance velocity is calculated after a call to " -"[method set_velocity]." +"[method set_velocity]. Only emitted when [member avoidance_enabled] is true." msgstr "" #: doc/classes/NavigationAgent2D.xml @@ -40460,13 +40547,25 @@ msgstr "" #: doc/classes/NetworkedMultiplayerCustom.xml msgid "" "Initialize the peer with the given [code]peer_id[/code] (must be between 1 " -"and 2147483647)." +"and 2147483647).\n" +"Can only be called if the connection status is [constant " +"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method " +"set_connection_status]." msgstr "" #: doc/classes/NetworkedMultiplayerCustom.xml msgid "" "Set the state of the connection. See [enum NetworkedMultiplayerPeer." -"ConnectionStatus]." +"ConnectionStatus].\n" +"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], " +"[signal NetworkedMultiplayerPeer.connection_failed] or [signal " +"NetworkedMultiplayerPeer.server_disconnected] signals depending on the " +"status and if the peer has the unique network id of [code]1[/code].\n" +"You can only change to [constant NetworkedMultiplayerPeer." +"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer." +"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer." +"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer." +"CONNECTION_CONNECTING]." msgstr "" #: doc/classes/NetworkedMultiplayerCustom.xml @@ -44155,7 +44254,9 @@ msgid "" "are also subject to automatic adjustments by the operating system. [b]Always " "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time " "calculation instead, since they are guaranteed to be monotonic (i.e. never " -"decrease)." +"decrease).\n" +"[b]Note:[/b] To get a floating point timestamp with sub-second precision, " +"use [method Time.get_unix_time_from_system]." msgstr "" #: doc/classes/OS.xml @@ -49593,7 +49694,9 @@ msgstr "" #: doc/classes/PopupMenu.xml #, fuzzy -msgid "Sets the currently focused item as the given [code]index[/code]." +msgid "" +"Sets the currently focused item as the given [code]index[/code].\n" +"Passing [code]-1[/code] as the index makes so that no item is focused." msgstr "" "与えられた[code]id[/code]を持つ点の位置[code]position[/code]を設定します。" @@ -49836,7 +49939,9 @@ msgstr "" msgid "" "Class for displaying popups with a panel background. In some cases it might " "be simpler to use than [Popup], since it provides a configurable background. " -"If you are making windows, better check [WindowDialog]." +"If you are making windows, better check [WindowDialog].\n" +"If any [Control] node is added as a child of this [PopupPanel], it will be " +"stretched to fit the panel's size (similar to how [PanelContainer] works)." msgstr "" #: doc/classes/PopupPanel.xml @@ -50572,7 +50677,11 @@ msgstr "" #: doc/classes/ProjectSettings.xml msgid "" "If [code]true[/code], microphone input will be allowed. This requires " -"appropriate permissions to be set when exporting to Android or iOS." +"appropriate permissions to be set when exporting to Android or iOS.\n" +"[b]Note:[/b] If the operating system blocks access to audio input devices " +"(due to the user's privacy settings), audio capture will only return " +"silence. On Windows 10 and later, make sure that apps are allowed to access " +"the microphone in the OS' privacy settings." msgstr "" #: doc/classes/ProjectSettings.xml @@ -53264,8 +53373,19 @@ msgstr "" msgid "" "Maximum anisotropic filter level used for textures with anisotropy enabled. " "Higher values will result in sharper textures when viewed from oblique " -"angles, at the cost of performance. Only power-of-two values are valid (2, " -"4, 8, 16)." +"angles, at the cost of performance. With the exception of [code]1[/code], " +"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/" +"code], [code]16[/code]). A value of [code]1[/code] forcibly disables " +"anisotropic filtering, even on textures where it is enabled.\n" +"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not " +"enabled by default[/i] on textures. For this setting to have an effect, " +"anisotropic texture filtering can be enabled by selecting a texture in the " +"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] " +"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is " +"rarely useful in 2D, so only enable it for textures in 2D if it makes a " +"meaningful visual difference.\n" +"[b]Note:[/b] This property is only read when the project starts. There is " +"currently no way to change this setting at run-time." msgstr "" #: doc/classes/ProjectSettings.xml @@ -57329,7 +57449,9 @@ msgid "" "cannot be instantiated.\n" "[b]Note:[/b] The scene change is deferred, which means that the new scene " "node is added on the next idle frame. You won't be able to access it " -"immediately after the [method change_scene_to] call." +"immediately after the [method change_scene_to] call.\n" +"[b]Note:[/b] Passing a value of [code]null[/code] into the method will " +"unload the current scene without loading a new one." msgstr "" #: doc/classes/SceneTree.xml @@ -57476,13 +57598,19 @@ msgstr "" #: doc/classes/SceneTree.xml msgid "" "If [code]true[/code], collision shapes will be visible when running the game " -"from the editor for debugging purposes." +"from the editor for debugging purposes.\n" +"[b]Note:[/b] This property is not designed to be changed at run-time. " +"Changing the value of [member debug_collisions_hint] while the project is " +"running will not have the desired effect." msgstr "" #: doc/classes/SceneTree.xml msgid "" "If [code]true[/code], navigation polygons will be visible when running the " -"game from the editor for debugging purposes." +"game from the editor for debugging purposes.\n" +"[b]Note:[/b] This property is not designed to be changed at run-time. " +"Changing the value of [member debug_navigation_hint] while the project is " +"running will not have the desired effect." msgstr "" #: doc/classes/SceneTree.xml @@ -58673,7 +58801,10 @@ msgid "" msgstr "" #: doc/classes/Shape2D.xml -msgid "The shape's custom solver bias." +msgid "" +"The shape's custom solver bias. Defines how much bodies react to enforce " +"contact separation when this shape is involved.\n" +"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used." msgstr "" #: doc/classes/ShortCut.xml @@ -59302,6 +59433,14 @@ msgstr "" #: doc/classes/Spatial.xml msgid "" +"Returns [code]true[/code] if the node is present in the [SceneTree], its " +"[member visible] property is [code]true[/code] and all its antecedents are " +"also visible. If any antecedent is hidden, this node will not be visible in " +"the scene tree." +msgstr "" + +#: doc/classes/Spatial.xml +msgid "" "Rotates the node so that the local forward axis (-Z) points toward the " "[code]target[/code] position.\n" "The local up axis (+Y) points as close to the [code]up[/code] vector as " @@ -59656,7 +59795,9 @@ msgid "" "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic " "texture filtering. Anisotropic texture filtering can be enabled by selecting " "a texture in the FileSystem dock, going to the Import dock, checking the " -"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]." +"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic " +"filtering level can be changed by adjusting [member ProjectSettings." +"rendering/quality/filters/anisotropic_filter_level]." msgstr "" #: doc/classes/SpatialMaterial.xml @@ -61345,7 +61486,7 @@ msgstr "" #: doc/classes/Sprite3D.xml msgid "" "[Texture] object to draw. If [member GeometryInstance.material_override] is " -"used, this will be overridden." +"used, this will be overridden. The size information is still used." msgstr "" #: doc/classes/SpriteBase3D.xml @@ -62635,6 +62776,9 @@ msgid "" "the substrings, starting from right.\n" "The splits in the returned array are sorted in the same order as the " "original string, from left to right.\n" +"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent " +"delimiters in the string, it will add an empty string to the array of " +"substrings at this position.\n" "If [code]maxsplit[/code] is specified, it defines the number of splits to do " "from the right up to [code]maxsplit[/code]. The default value of 0 means " "that all items are split, thus giving the same result as [method split].\n" @@ -62696,6 +62840,9 @@ msgstr "" msgid "" "Splits the string by a [code]delimiter[/code] string and returns an array of " "the substrings. The [code]delimiter[/code] can be of any length.\n" +"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent " +"delimiters in the string, it will add an empty string to the array of " +"substrings at this position.\n" "If [code]maxsplit[/code] is specified, it defines the number of splits to do " "from the left up to [code]maxsplit[/code]. The default value of [code]0[/" "code] means that all items are split.\n" @@ -62718,7 +62865,10 @@ msgid "" "Splits the string in floats by using a delimiter string and returns an array " "of the substrings.\n" "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if " -"split by [code]\",\"[/code]." +"split by [code]\",\"[/code].\n" +"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent " +"delimiters in the string, it will add an empty string to the array of " +"substrings at this position." msgstr "" #: doc/classes/String.xml @@ -63868,6 +64018,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled." msgstr "" #: doc/classes/Tabs.xml +#, fuzzy +msgid "Returns the button icon from the tab at index [code]tab_idx[/code]." +msgstr "インデックス [code]bus_idx[/code] のバスの音量を dB で返します。" + +#: doc/classes/Tabs.xml msgid "Returns the number of hidden tabs offsetted to the left." msgstr "" @@ -63898,6 +64053,11 @@ msgid "" msgstr "" #: doc/classes/Tabs.xml +#, fuzzy +msgid "Sets the button icon from the tab at index [code]tab_idx[/code]." +msgstr "インデックス [code]bus_idx[/code] のバスの音量を dB で返します。" + +#: doc/classes/Tabs.xml msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]." msgstr "" @@ -63940,8 +64100,13 @@ msgid "" msgstr "" #: doc/classes/Tabs.xml -msgid "Emitted when a tab is right-clicked." +#, fuzzy +msgid "" +"Emitted when a tab's right button is pressed. See [method " +"set_tab_button_icon]." msgstr "" +"カスタムボタンが押されたときに表示されます。[method add_button] を参照してく" +"ださい。" #: doc/classes/Tabs.xml msgid "Emitted when a tab is clicked, even if it is the current tab." @@ -68905,21 +69070,25 @@ msgid "Makes subsequent actions with the same name be merged into one." msgstr "" #: modules/upnp/doc_classes/UPNP.xml -msgid "UPNP network functions." +msgid "" +"Universal Plug and Play (UPnP) functions for network device discovery, " +"querying and port forwarding." msgstr "" #: modules/upnp/doc_classes/UPNP.xml msgid "" -"Provides UPNP functionality to discover [UPNPDevice]s on the local network " -"and execute commands on them, like managing port mappings (port forwarding) " -"and querying the local and remote network IP address. Note that methods on " -"this class are synchronous and block the calling thread.\n" -"To forward a specific port:\n" +"This class can be used to discover compatible [UPNPDevice]s on the local " +"network and execute commands on them, like managing port mappings (for port " +"forwarding/NAT traversal) and querying the local and remote network IP " +"address. Note that methods on this class are synchronous and block the " +"calling thread.\n" +"To forward a specific port (here [code]7777[/code], note both [method " +"discover] and [method add_port_mapping] can return errors that should be " +"checked):\n" "[codeblock]\n" -"const PORT = 7777\n" "var upnp = UPNP.new()\n" -"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n" -"upnp.add_port_mapping(port)\n" +"upnp.discover()\n" +"upnp.add_port_mapping(7777)\n" "[/codeblock]\n" "To close a specific port (e.g. after you have finished using it):\n" "[codeblock]\n" @@ -68932,7 +69101,7 @@ msgid "" "or failure).\n" "signal upnp_completed(error)\n" "\n" -"# Replace this with your own server port number between 1025 and 65535.\n" +"# Replace this with your own server port number between 1024 and 65535.\n" "const SERVER_PORT = 3928\n" "var thread = null\n" "\n" @@ -68961,7 +69130,39 @@ msgid "" " # Wait for thread finish here to handle game exit while the thread is " "running.\n" " thread.wait_to_finish()\n" -"[/codeblock]" +"[/codeblock]\n" +"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or " +"\"internet gateway device\", short IGD) refers to network devices that allow " +"computers in the local network to access the internet (\"wide area " +"network\", WAN). These gateways are often also called \"routers\".\n" +"[b]Pitfalls:[/b]\n" +"- As explained above, these calls are blocking and shouldn't be run on the " +"main thread, especially as they can block for multiple seconds at a time. " +"Use threading!\n" +"- Networking is physical and messy. Packets get lost in transit or get " +"filtered, addresses, free ports and assigned mappings change, and devices " +"may leave or join the network at any time. Be mindful of this, be diligent " +"when checking and handling errors, and handle these gracefully if you can: " +"add clear error UI, timeouts and re-try handling.\n" +"- Port mappings may change (and be removed) at any time, and the remote/" +"external IP address of the gateway can change likewise. You should consider " +"re-querying the external IP and try to update/refresh the port mapping " +"periodically (for example, every 5 minutes and on networking failures).\n" +"- Not all devices support UPnP, and some users disable UPnP support. You " +"need to handle this (e.g. documenting and requiring the user to manually " +"forward ports, or adding alternative methods of NAT traversal, like a relay/" +"mirror server, or NAT hole punching, STUN/TURN, etc.).\n" +"- Consider what happens on mapping conflicts. Maybe multiple users on the " +"same network would like to play your game at the same time, or maybe another " +"application uses the same port. Make the port configurable, and optimally " +"choose a port automatically (re-trying with a different port on failure).\n" +"[b]Further reading:[/b] If you want to know more about UPnP (and the " +"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), " +"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] " +"is a good first stop, the specification can be found at the [url=https://" +"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open " +"Connectivity Foundation[/url] and Godot's implementation is based on the " +"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]." msgstr "" #: modules/upnp/doc_classes/UPNP.xml @@ -68971,22 +69172,35 @@ msgstr "" #: modules/upnp/doc_classes/UPNP.xml msgid "" "Adds a mapping to forward the external [code]port[/code] (between 1 and " -"65535) on the default gateway (see [method get_gateway]) to the " -"[code]internal_port[/code] on the local machine for the given protocol " -"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP " -"being the default). If a port mapping for the given port and protocol " -"combination already exists on that gateway device, this method tries to " -"overwrite it. If that is not desired, you can retrieve the gateway manually " -"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n" +"65535, although recommended to use port 1024 or above) on the default " +"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the " +"local machine for the given protocol [code]proto[/code] (either [code]TCP[/" +"code] or [code]UDP[/code], with UDP being the default). If a port mapping " +"for the given port and protocol combination already exists on that gateway " +"device, this method tries to overwrite it. If that is not desired, you can " +"retrieve the gateway manually with [method get_gateway] and call [method " +"add_port_mapping] on it, if any. Note that forwarding a well-known port " +"(below 1024) with UPnP may fail depending on the device.\n" +"Depending on the gateway device, if a mapping for that port already exists, " +"it will either be updated or it will refuse this command due to that " +"conflict, especially if the existing mapping for that port wasn't created " +"via UPnP or points to a different network address (or device) than this " +"one.\n" "If [code]internal_port[/code] is [code]0[/code] (the default), the same port " "number is used for both the external and the internal port (the [code]port[/" "code] value).\n" -"The description ([code]desc[/code]) is shown in some router UIs and can be " -"used to point out which application added the mapping. The mapping's lease " -"duration can be limited by specifying a [code]duration[/code] (in seconds). " -"However, some routers are incompatible with one or both of these, so use " -"with caution and add fallback logic in case of errors to retry without them " -"if in doubt.\n" +"The description ([code]desc[/code]) is shown in some routers management UIs " +"and can be used to point out which application added the mapping.\n" +"The mapping's lease [code]duration[/code] can be limited by specifying a " +"duration in seconds. The default of [code]0[/code] means no duration, i.e. a " +"permanent lease and notably some devices only support these permanent " +"leases. Note that whether permanent or not, this is only a request and the " +"gateway may still decide at any point to remove the mapping (which usually " +"happens on a reboot of the gateway, when its external IP address changes, or " +"on some models when it detects a port mapping has become inactive, i.e. had " +"no traffic for multiple minutes). If not [code]0[/code] (permanent), the " +"allowed range according to spec is between [code]120[/code] (2 minutes) and " +"[code]86400[/code] seconds (24 hours).\n" "See [enum UPNPResult] for possible return values." msgstr "" @@ -68999,8 +69213,10 @@ msgid "" "Deletes the port mapping for the given port and protocol combination on the " "default gateway (see [method get_gateway]) if one exists. [code]port[/code] " "must be a valid port between 1 and 65535, [code]proto[/code] can be either " -"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible " -"return values." +"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing " +"to addresses other than this one, for well-known ports (below 1024), or for " +"mappings not added via UPnP. See [enum UPNPResult] for possible return " +"values." msgstr "" #: modules/upnp/doc_classes/UPNP.xml @@ -69198,16 +69414,16 @@ msgid "Unknown error." msgstr "" #: modules/upnp/doc_classes/UPNPDevice.xml -msgid "UPNP device." +msgid "Universal Plug and Play (UPnP) device." msgstr "" #: modules/upnp/doc_classes/UPNPDevice.xml msgid "" -"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides " -"low-level access to UPNP control commands. Allows to manage port mappings " -"(port forwarding) and to query network information of the device (like local " -"and external IP address and status). Note that methods on this class are " -"synchronous and block the calling thread." +"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and " +"utility functions. Provides low-level access to UPNP control commands. " +"Allows to manage port mappings (port forwarding) and to query network " +"information of the device (like local and external IP address and status). " +"Note that methods on this class are synchronous and block the calling thread." msgstr "" #: modules/upnp/doc_classes/UPNPDevice.xml @@ -77981,7 +78197,9 @@ msgid "" msgstr "" #: doc/classes/WeakRef.xml -msgid "Returns the [Object] this weakref is referring to." +msgid "" +"Returns the [Object] this weakref is referring to. Returns [code]null[/code] " +"if that object no longer exists." msgstr "" #: modules/webrtc/doc_classes/WebRTCDataChannel.xml |