diff options
Diffstat (limited to 'doc/translations/el.po')
| -rw-r--r-- | doc/translations/el.po | 488 |
1 files changed, 380 insertions, 108 deletions
diff --git a/doc/translations/el.po b/doc/translations/el.po index 07ba0eeae0..98bb60e4a3 100644 --- a/doc/translations/el.po +++ b/doc/translations/el.po @@ -3330,8 +3330,12 @@ msgstr "" #: doc/classes/@GlobalScope.xml msgid "" "Hints that an integer, float or string property is an enumerated value to " -"pick in a list specified via a hint string such as [code]\"Hello,Something," -"Else\"[/code]." +"pick in a list specified via a hint string.\n" +"The hint string is a comma separated list of names such as [code]\"Hello," +"Something,Else\"[/code]. For integer and float properties, the first name in " +"the list has value 0, the next 1, and so on. Explicit values can also be " +"specified by appending [code]:integer[/code] to the name, e.g. [code]\"Zero," +"One,Three:3,Four,Six:6\"[/code]." msgstr "" #: doc/classes/@GlobalScope.xml @@ -3472,7 +3476,7 @@ msgid "The property is a translatable string." msgstr "" #: doc/classes/@GlobalScope.xml -msgid "Used to group properties together in the editor." +msgid "Used to group properties together in the editor. See [EditorInspector]." msgstr "" #: doc/classes/@GlobalScope.xml @@ -5245,8 +5249,11 @@ msgstr "" #: doc/classes/AnimationNodeBlendTree.xml msgid "" -"This node may contain a sub-tree of any other blend type nodes, such as mix, " -"blend2, blend3, one shot, etc. This is one of the most commonly used roots." +"This node may contain a sub-tree of any other blend type nodes, such as " +"[AnimationNodeTransition], [AnimationNodeBlend2], [AnimationNodeBlend3], " +"[AnimationNodeOneShot], etc. This is one of the most commonly used roots.\n" +"An [AnimationNodeOutput] node named [code]output[/code] is created by " +"default." msgstr "" #: doc/classes/AnimationNodeBlendTree.xml @@ -6988,8 +6995,9 @@ msgstr "" #: doc/classes/Array.xml msgid "" -"Removes the first occurrence of a value from the array. To remove an element " -"by index, use [method remove] instead.\n" +"Removes the first occurrence of a value from the array. If the value does " +"not exist in the array, nothing happens. To remove an element by index, use " +"[method remove] instead.\n" "[b]Note:[/b] This method acts in-place and doesn't return a value.\n" "[b]Note:[/b] On large arrays, this method will be slower if the removed " "element is close to the beginning of the array (index 0). This is because " @@ -10366,8 +10374,15 @@ msgstr "" #: doc/classes/BakedLightmap.xml msgid "" -"When enabled, the lightmapper will merge the textures for all meshes into a " -"single large layered texture. Not supported in GLES2." +"If [code]true[/code], the lightmapper will merge the textures for all meshes " +"into one or several large layered textures. If [code]false[/code], every " +"mesh will get its own lightmap texture, which is less efficient.\n" +"[b]Note:[/b] Atlas lightmap rendering is only supported in GLES3, [i]not[/i] " +"GLES2. Non-atlas lightmap rendering is supported by both GLES3 and GLES2. If " +"[member ProjectSettings.rendering/quality/driver/fallback_to_gles2] is " +"[code]true[/code], consider baking lightmaps with [member atlas_generate] " +"set to [code]false[/code] so that the resulting lightmap is visible in both " +"GLES3 and GLES2." msgstr "" #: doc/classes/BakedLightmap.xml @@ -11712,8 +11727,8 @@ msgstr "" #: doc/classes/Camera.xml msgid "" "The camera's size measured as 1/2 the width or height. Only applicable in " -"orthogonal mode. Since [member keep_aspect] locks on axis, [code]size[/code] " -"sets the other axis' size length." +"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, " +"[code]size[/code] sets the other axis' size length." msgstr "" #: doc/classes/Camera.xml @@ -12515,20 +12530,24 @@ msgstr "" #: doc/classes/CanvasItem.xml msgid "" -"If [code]enable[/code] is [code]true[/code], the node won't inherit its " -"transform from parent canvas items." +"If [code]enable[/code] is [code]true[/code], this [CanvasItem] will [i]not[/" +"i] inherit its transform from parent [CanvasItem]s. Its draw order will also " +"be changed to make it draw on top of other [CanvasItem]s that are not set as " +"top-level. The [CanvasItem] will effectively act as if it was placed as a " +"child of a bare [Node]. See also [method is_set_as_toplevel]." msgstr "" #: doc/classes/CanvasItem.xml msgid "" -"If [code]enable[/code] is [code]true[/code], children will be updated with " -"local transform data." +"If [code]enable[/code] is [code]true[/code], this node will receive " +"[constant NOTIFICATION_LOCAL_TRANSFORM_CHANGED] when its local transform " +"changes." msgstr "" #: doc/classes/CanvasItem.xml msgid "" -"If [code]enable[/code] is [code]true[/code], children will be updated with " -"global transform data." +"If [code]enable[/code] is [code]true[/code], this node will receive " +"[constant NOTIFICATION_TRANSFORM_CHANGED] when its global transform changes." msgstr "" #: doc/classes/CanvasItem.xml @@ -12642,9 +12661,14 @@ msgstr "" #: doc/classes/CanvasItem.xml msgid "" -"The [CanvasItem]'s transform has changed. This notification is only received " -"if enabled by [method set_notify_transform] or [method " -"set_notify_local_transform]." +"The [CanvasItem]'s global transform has changed. This notification is only " +"received if enabled by [method set_notify_transform]." +msgstr "" + +#: doc/classes/CanvasItem.xml +msgid "" +"The [CanvasItem]'s local transform has changed. This notification is only " +"received if enabled by [method set_notify_local_transform]." msgstr "" #: doc/classes/CanvasItem.xml @@ -13599,7 +13623,10 @@ msgid "" "number of 2D collision [Shape2D]s. Each shape must be assigned to a [i]shape " "owner[/i]. The CollisionObject2D can have any number of shape owners. Shape " "owners are not nodes and do not appear in the editor, but are accessible " -"through code using the [code]shape_owner_*[/code] methods." +"through code using the [code]shape_owner_*[/code] methods.\n" +"[b]Note:[/b] Only collisions between objects within the same canvas " +"([Viewport] canvas or [CanvasLayer]) are supported. The behavior of " +"collisions between objects in different canvases is undefined." msgstr "" #: doc/classes/CollisionObject2D.xml @@ -19617,9 +19644,8 @@ msgid "" "main font.\n" "DynamicFont uses the [url=https://www.freetype.org/]FreeType[/url] library " "for rasterization. Supported formats are TrueType ([code].ttf[/code]), " -"OpenType ([code].otf[/code]) and Web Open Font Format 1 ([code].woff[/" -"code]). Web Open Font Format 2 ([code].woff2[/code]) is [i]not[/i] " -"supported.\n" +"OpenType ([code].otf[/code]), Web Open Font Format 1 ([code].woff[/code]), " +"and Web Open Font Format 2 ([code].woff2[/code]).\n" "[codeblock]\n" "var dynamic_font = DynamicFont.new()\n" "dynamic_font.font_data = load(\"res://BarlowCondensed-Bold.ttf\")\n" @@ -20486,18 +20512,34 @@ msgid "" msgstr "" #: doc/classes/EditorInspector.xml -msgid "A tab used to edit properties of the selected node." +msgid "A control used to edit properties of an object." msgstr "" #: doc/classes/EditorInspector.xml msgid "" -"The editor inspector is by default located on the right-hand side of the " -"editor. It's used to edit the properties of the selected node. For example, " -"you can select a node such as [Sprite] then edit its transform through the " -"inspector tool. The editor inspector is an essential tool in the game " -"development workflow.\n" -"[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access " -"the singleton using [method EditorInterface.get_inspector]." +"This is the control that implements property editing in the editor's " +"Settings dialogs, the Inspector dock, etc. To get the [EditorInspector] used " +"in the editor's Inspector dock, use [method EditorInterface.get_inspector].\n" +"[EditorInspector] will show properties in the same order as the array " +"returned by [method Object.get_property_list].\n" +"If a property's name is path-like (i.e. if it contains forward slashes), " +"[EditorInspector] will create nested sections for \"directories\" along the " +"path. For example, if a property is named [code]highlighting/gdscript/" +"node_path_color[/code], it will be shown as \"Node Path Color\" inside the " +"\"GDScript\" section nested inside the \"Highlighting\" section.\n" +"If a property has [constant @GlobalScope.PROPERTY_USAGE_GROUP] usage, it " +"will group subsequent properties whose name starts with the property's hint " +"string. The group ends when a property does not start with that hint string " +"or when a new group starts. An empty group name effectively ends the current " +"group. [EditorInspector] will create a top-level section for each group. For " +"example, if a property with group usage is named [code]Collide With[/code] " +"and its hint string is [code]collide_with_[/code], a subsequent " +"[code]collide_with_area[/code] property will be shown as \"Area\" inside the " +"\"Collide With\" section.\n" +"[b]Note:[/b] Unlike sections created from path-like property names, " +"[EditorInspector] won't capitalize the name for sections created from " +"groups. So properties with group usage usually use capitalized names instead " +"of snake_cased names." msgstr "" #: doc/classes/EditorInspector.xml @@ -21672,6 +21714,14 @@ msgid "" "[/codeblock]" msgstr "" +#: modules/gltf/doc_classes/EditorSceneImporterGLTF.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [EditorSceneImporterGLTF] within a script will cause an error in an " +"exported project." +msgstr "" + #: doc/classes/EditorScenePostImport.xml msgid "Post-processes scenes after import." msgstr "" @@ -22410,12 +22460,13 @@ msgstr "" #: doc/classes/EditorVCSInterface.xml msgid "" "Helper function to create a commit [Dictionary] item. [code]msg[/code] is " -"the commit message of the commit. [code]author[/code] is a human-readable " -"string containing the author's details, e.g. the email and name configured " -"in the VCS. [code]id[/code] is the identifier of the commit, in whichever " -"format your VCS may provide an identifier to commits. [code]date[/code] is " -"directly added to the commit item and displayed in the editor, and hence, it " -"shall be a well-formatted, human-readable date string." +"the commit message of the commit. [code]author[/code] is a single human-" +"readable string containing all the author's details, e.g. the email and name " +"configured in the VCS. [code]id[/code] is the identifier of the commit, in " +"whichever format your VCS may provide an identifier to commits. " +"[code]unix_timestamp[/code] is the UTC Unix timestamp of when the commit was " +"created. [code]offset_minutes[/code] is the timezone offset in minutes, " +"recorded from the system timezone where the commit was created." msgstr "" #: doc/classes/EditorVCSInterface.xml @@ -25571,6 +25622,50 @@ msgstr "" msgid "Represents the size of the [enum Subdiv] enum." msgstr "" +#: modules/gltf/doc_classes/GLTFAccessor.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFAccessor] within a script will cause an error in an exported project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFAnimation.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFAnimation] within a script will cause an error in an exported " +"project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFBufferView.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFBufferView] within a script will cause an error in an exported " +"project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFCamera.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFCamera] within a script will cause an error in an exported project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFDocument.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFDocument] within a script will cause an error in an exported project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFLight.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFLight] within a script will cause an error in an exported project." +msgstr "" + #: modules/gltf/doc_classes/GLTFLight.xml msgid "" "The [Color] of the light. Defaults to white. A black color causes the light " @@ -25620,6 +25715,49 @@ msgid "" "and [DirectionalLight] respectively." msgstr "" +#: modules/gltf/doc_classes/GLTFMesh.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFMesh] within a script will cause an error in an exported project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFNode.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFNode] within a script will cause an error in an exported project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFSkeleton.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFSkeleton] within a script will cause an error in an exported project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFSpecGloss.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFSpecGloss] within a script will cause an error in an exported " +"project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFState.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFState] within a script will cause an error in an exported project." +msgstr "" + +#: modules/gltf/doc_classes/GLTFTexture.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [GLTFTexture] within a script will cause an error in an exported project." +msgstr "" + #: modules/mono/doc_classes/GodotSharp.xml msgid "Bridge between Godot and the Mono runtime (Mono-enabled builds only)." msgstr "" @@ -29008,9 +29146,9 @@ msgid "" "Returns a value between 0 and 1 representing the raw intensity of the given " "action, ignoring the action's deadzone. In most cases, you should use " "[method get_action_strength] instead.\n" -"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers " -"for [InputEventKey] and [InputEventMouseButton] events, and the direction " -"for [InputEventJoypadMotion] events." +"If [code]exact[/code] is [code]false[/code], it ignores additional input " +"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " +"direction for [InputEventJoypadMotion] events." msgstr "" #: doc/classes/Input.xml @@ -29020,9 +29158,9 @@ msgid "" "or L2, R2 triggers) is from the dead zone, the closer the value will be to " "1. If the action is mapped to a control that has no axis as the keyboard, " "the value returned will be 0 or 1.\n" -"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers " -"for [InputEventKey] and [InputEventMouseButton] events, and the direction " -"for [InputEventJoypadMotion] events." +"If [code]exact[/code] is [code]false[/code], it ignores additional input " +"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " +"direction for [InputEventJoypadMotion] events." msgstr "" #: doc/classes/Input.xml @@ -29155,9 +29293,9 @@ msgid "" "the button.\n" "This is useful for code that needs to run only once when an action is " "pressed, instead of every frame while it's pressed.\n" -"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers " -"for [InputEventKey] and [InputEventMouseButton] events, and the direction " -"for [InputEventJoypadMotion] events.\n" +"If [code]exact[/code] is [code]false[/code], it ignores additional input " +"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " +"direction for [InputEventJoypadMotion] events.\n" "[b]Note:[/b] Due to keyboard ghosting, [method is_action_just_pressed] may " "return [code]false[/code] even if one of the action's keys is pressed. See " "[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input " @@ -29169,9 +29307,9 @@ msgid "" "Returns [code]true[/code] when the user stops pressing the action event, " "meaning it's [code]true[/code] only on the frame that the user released the " "button.\n" -"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers " -"for [InputEventKey] and [InputEventMouseButton] events, and the direction " -"for [InputEventJoypadMotion] events." +"If [code]exact[/code] is [code]false[/code], it ignores additional input " +"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " +"direction for [InputEventJoypadMotion] events." msgstr "" #: doc/classes/Input.xml @@ -29180,9 +29318,9 @@ msgid "" "an action has multiple buttons assigned and more than one of them is " "pressed, releasing one button will release the action, even if some other " "button assigned to this action is still pressed.\n" -"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers " -"for [InputEventKey] and [InputEventMouseButton] events, and the direction " -"for [InputEventJoypadMotion] events.\n" +"If [code]exact[/code] is [code]false[/code], it ignores additional input " +"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " +"direction for [InputEventJoypadMotion] events.\n" "[b]Note:[/b] Due to keyboard ghosting, [method is_action_pressed] may return " "[code]false[/code] even if one of the action's keys is pressed. See " "[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input " @@ -29532,18 +29670,18 @@ msgstr "" msgid "" "Returns a value between 0.0 and 1.0 depending on the given actions' state. " "Useful for getting the value of events of type [InputEventJoypadMotion].\n" -"If [code]exact_match[/code] is [code]false[/code], it ignores the input " -"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " -"direction for [InputEventJoypadMotion] events." +"If [code]exact_match[/code] is [code]false[/code], it ignores additional " +"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and " +"the direction for [InputEventJoypadMotion] events." msgstr "" #: doc/classes/InputEvent.xml msgid "" "Returns [code]true[/code] if this input event matches a pre-defined action " "of any type.\n" -"If [code]exact_match[/code] is [code]false[/code], it ignores the input " -"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " -"direction for [InputEventJoypadMotion] events." +"If [code]exact_match[/code] is [code]false[/code], it ignores additional " +"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and " +"the direction for [InputEventJoypadMotion] events." msgstr "" #: doc/classes/InputEvent.xml @@ -29552,9 +29690,9 @@ msgid "" "an echo event for [InputEventKey] events, unless [code]allow_echo[/code] is " "[code]true[/code]). Not relevant for events of type [InputEventMouseMotion] " "or [InputEventScreenDrag].\n" -"If [code]exact_match[/code] is [code]false[/code], it ignores the input " -"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " -"direction for [InputEventJoypadMotion] events.\n" +"If [code]exact_match[/code] is [code]false[/code], it ignores additional " +"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and " +"the direction for [InputEventJoypadMotion] events.\n" "[b]Note:[/b] Due to keyboard ghosting, [method is_action_pressed] may return " "[code]false[/code] even if one of the action's keys is pressed. See " "[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input " @@ -29566,9 +29704,9 @@ msgid "" "Returns [code]true[/code] if the given action is released (i.e. not " "pressed). Not relevant for events of type [InputEventMouseMotion] or " "[InputEventScreenDrag].\n" -"If [code]exact_match[/code] is [code]false[/code], it ignores the input " -"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " -"direction for [InputEventJoypadMotion] events." +"If [code]exact_match[/code] is [code]false[/code], it ignores additional " +"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and " +"the direction for [InputEventJoypadMotion] events." msgstr "" #: doc/classes/InputEvent.xml @@ -29599,9 +29737,9 @@ msgid "" "event. Only valid for action events i.e key ([InputEventKey]), button " "([InputEventMouseButton] or [InputEventJoypadButton]), axis " "[InputEventJoypadMotion] or action ([InputEventAction]) events.\n" -"If [code]exact_match[/code] is [code]false[/code], it ignores the input " -"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " -"direction for [InputEventJoypadMotion] events." +"If [code]exact_match[/code] is [code]false[/code], it ignores additional " +"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and " +"the direction for [InputEventJoypadMotion] events." msgstr "" #: doc/classes/InputEvent.xml @@ -30132,9 +30270,9 @@ msgid "" "This method ignores keyboard modifiers if the given [InputEvent] is not " "pressed (for proper release detection). See [method action_has_event] if you " "don't want this behavior.\n" -"If [code]exact_match[/code] is [code]false[/code], it ignores the input " -"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the " -"direction for [InputEventJoypadMotion] events." +"If [code]exact_match[/code] is [code]false[/code], it ignores additional " +"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and " +"the direction for [InputEventJoypadMotion] events." msgstr "" #: doc/classes/InputMap.xml @@ -32539,7 +32677,7 @@ msgid "" "be within the text's length." msgstr "" -#: doc/classes/LineEdit.xml +#: doc/classes/LineEdit.xml doc/classes/RichTextLabel.xml msgid "Clears the current selection." msgstr "" @@ -32558,6 +32696,19 @@ msgid "" "characters." msgstr "" +#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml +msgid "Returns the selection begin column." +msgstr "" + +#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml +msgid "Returns the selection end column." +msgstr "" + +#: doc/classes/LineEdit.xml +#, fuzzy +msgid "Returns [code]true[/code] if the user has selected text." +msgstr "Επιστρέφει το συνημίτονο της παραμέτρου." + #: doc/classes/LineEdit.xml msgid "Executes a given action as defined in the [enum MenuItems] enum." msgstr "" @@ -33971,6 +34122,39 @@ msgid "Returns the number of surface materials." msgstr "" #: doc/classes/MeshInstance.xml +msgid "" +"Returns [code]true[/code] if this [MeshInstance] can be merged with the " +"specified [code]other_mesh_instance[/code], using the [method MeshInstance." +"merge_meshes] function.\n" +"In order to be mergeable, properties of the [MeshInstance] must match, and " +"each surface must match, in terms of material, attributes and vertex format." +msgstr "" + +#: doc/classes/MeshInstance.xml +msgid "" +"This function can merge together the data from several source " +"[MeshInstance]s into a single destination [MeshInstance] (the MeshInstance " +"the function is called from). This is primarily useful for improving " +"performance by reducing the number of drawcalls and [Node]s.\n" +"Merging should only be attempted for simple meshes that do not contain " +"animation.\n" +"The final vertices can either be returned in global space, or in local space " +"relative to the destination [MeshInstance] global transform (the destination " +"Node must be inside the [SceneTree] for local space to work).\n" +"The function will make a final check for compatibility between the " +"[MeshInstance]s by default, this should always be used unless you have " +"previously checked for compatibility using [method MeshInstance." +"is_mergeable_with]. If the compatibility check is omitted and the meshes are " +"merged, you may see rendering errors.\n" +"[b]Note:[/b] The requirements for similarity between meshes are quite " +"stringent. They can be checked using the [method MeshInstance." +"is_mergeable_with] function prior to calling [method MeshInstance." +"merge_meshes].\n" +"Also note that any initial data in the destination [MeshInstance] data will " +"be discarded." +msgstr "" + +#: doc/classes/MeshInstance.xml msgid "Sets the [Material] for a surface of the [Mesh] resource." msgstr "" @@ -36443,12 +36627,12 @@ msgid "" "[/codeblock]\n" "[b]Note:[/b] If you want a child to be persisted to a [PackedScene], you " "must set [member owner] in addition to calling [method add_child]. This is " -"typically relevant for [url=https://godot.readthedocs.io/en/3.2/tutorials/" -"misc/running_code_in_the_editor.html]tool scripts[/url] and [url=https://" -"godot.readthedocs.io/en/latest/tutorials/plugins/editor/index.html]editor " -"plugins[/url]. If [method add_child] is called without setting [member " -"owner], the newly added [Node] will not be visible in the scene tree, though " -"it will be visible in the 2D/3D view." +"typically relevant for [url=$DOCS_URL/tutorials/misc/" +"running_code_in_the_editor.html]tool scripts[/url] and [url=$DOCS_URL/" +"tutorials/plugins/editor/index.html]editor plugins[/url]. If [method " +"add_child] is called without setting [member owner], the newly added [Node] " +"will not be visible in the scene tree, though it will be visible in the " +"2D/3D view." msgstr "" #: doc/classes/Node.xml @@ -37155,7 +37339,15 @@ msgid "" "valid parent, grandparent, etc. ascending in the tree). When saving a node " "(using [PackedScene]), all the nodes it owns will be saved with it. This " "allows for the creation of complex [SceneTree]s, with instancing and " -"subinstancing." +"subinstancing.\n" +"[b]Note:[/b] If you want a child to be persisted to a [PackedScene], you " +"must set [member owner] in addition to calling [method add_child]. This is " +"typically relevant for [url=$DOCS_URL/tutorials/misc/" +"running_code_in_the_editor.html]tool scripts[/url] and [url=$DOCS_URL/" +"tutorials/plugins/editor/index.html]editor plugins[/url]. If [method " +"add_child] is called without setting [member owner], the newly added [Node] " +"will not be visible in the scene tree, though it will be visible in the " +"2D/3D view." msgstr "" #: doc/classes/Node.xml @@ -37751,7 +37943,13 @@ msgid "" msgstr "" #: doc/classes/Object.xml -msgid "Called when the object is initialized." +msgid "" +"Called when the object is initialized in memory. Can be defined to take in " +"parameters, that are passed in when constructing.\n" +"[b]Note:[/b] If [method _init] is defined with required parameters, then " +"explicit construction is the only valid means of creating an Object of the " +"class. If any other means (such as [method PackedScene.instance]) is used, " +"then initialization will fail." msgstr "" #: doc/classes/Object.xml @@ -37947,7 +38145,10 @@ msgid "" msgstr "" #: doc/classes/Object.xml -msgid "Returns the object's metadata entry for the given [code]name[/code]." +msgid "" +"Returns the object's metadata entry for the given [code]name[/code].\n" +"Throws error if the entry does not exist, unless [code]default[/code] is not " +"[code]null[/code] (in which case the default value will be returned)." msgstr "" #: doc/classes/Object.xml @@ -40163,6 +40364,14 @@ msgid "" "[b]Note:[/b] Only available in editor builds." msgstr "" +#: modules/gltf/doc_classes/PackedSceneGLTF.xml +msgid "" +"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF " +"loading and saving is [i]not[/i] available in exported projects. References " +"to [PackedSceneGLTF] within a script will cause an error in an exported " +"project." +msgstr "" + #: doc/classes/PacketPeer.xml msgid "Abstraction and base class for packet-based protocols." msgstr "" @@ -43006,7 +43215,10 @@ msgid "" msgstr "" #: doc/classes/PhysicsServer.xml -msgid "Returns an Info defined by the [enum ProcessInfo] input given." +msgid "" +"Returns information about the current state of the 3D physics engine. See " +"[enum ProcessInfo] for a list of available states. Only implemented for " +"Godot Physics." msgstr "" #: doc/classes/PhysicsServer.xml @@ -45871,7 +46083,7 @@ msgstr "" #: doc/classes/ProjectSettings.xml msgid "" "Allows the window to be resizable by default.\n" -"[b]Note:[/b] This setting is ignored on iOS and Android." +"[b]Note:[/b] This setting is ignored on iOS." msgstr "" #: doc/classes/ProjectSettings.xml @@ -46518,7 +46730,7 @@ msgid "Optional name for the 3D render layer 13." msgstr "" #: doc/classes/ProjectSettings.xml -msgid "Optional name for the 3D render layer 14" +msgid "Optional name for the 3D render layer 14." msgstr "" #: doc/classes/ProjectSettings.xml @@ -47788,16 +48000,24 @@ msgstr "" #: doc/classes/ProjectSettings.xml msgid "" -"If [code]true[/code], forces vertex shading for all rendering. This can " -"increase performance a lot, but also reduces quality immensely. Can be used " -"to optimize performance on low-end mobile devices." +"If [code]true[/code], forces vertex shading for all 3D [SpatialMaterial] and " +"[ShaderMaterial] rendering. This can be used to improve performance on low-" +"end mobile devices. The downside is that shading becomes much less accurate, " +"with visible linear interpolation between vertices that are joined together. " +"This can be compensated by ensuring meshes have a sufficient level of " +"subdivision (but not too much, to avoid reducing performance). Some material " +"features are also not supported when vertex shading is enabled.\n" +"See also [member SpatialMaterial.flags_vertex_lighting] which can be used to " +"enable vertex shading on specific materials only.\n" +"[b]Note:[/b] This setting does not affect unshaded materials." msgstr "" #: doc/classes/ProjectSettings.xml msgid "" "Lower-end override for [member rendering/quality/shading/" "force_vertex_shading] on mobile devices, due to performance concerns or " -"driver support." +"driver support. If lighting looks broken after exporting the project to a " +"mobile platform, try disabling this setting." msgstr "" #: doc/classes/ProjectSettings.xml @@ -49833,6 +50053,11 @@ msgid "" msgstr "" #: doc/classes/RichTextLabel.xml +#, fuzzy +msgid "Returns the current selection text. Does not include BBCodes." +msgstr "Επιστρέφει την εφαπτομένη της παραμέτρου." + +#: doc/classes/RichTextLabel.xml msgid "" "Returns the total number of characters from text tags. Does not include " "BBCodes." @@ -52124,14 +52349,23 @@ msgstr "" #: doc/classes/Semaphore.xml msgid "" -"Lowers the [Semaphore], allowing one more thread in. Returns [constant OK] " -"on success, [constant ERR_BUSY] otherwise." +"Lowers the [Semaphore], allowing one more thread in.\n" +"[b]Note:[/b] This method internals' can't possibly fail, but an error code " +"is returned for backwards compatibility, which will always be [constant OK]." msgstr "" #: doc/classes/Semaphore.xml msgid "" -"Tries to wait for the [Semaphore], if its value is zero, blocks until non-" -"zero. Returns [constant OK] on success, [constant ERR_BUSY] otherwise." +"Like [method wait], but won't block, so if the value is zero, fails " +"immediately and returns [constant ERR_BUSY]. If non-zero, it returns " +"[constant OK] to report success." +msgstr "" + +#: doc/classes/Semaphore.xml +msgid "" +"Waits for the [Semaphore], if its value is zero, blocks until non-zero.\n" +"[b]Note:[/b] This method internals' can't possibly fail, but an error code " +"is returned for backwards compatibility, which will always be [constant OK]." msgstr "" #: doc/classes/Separator.xml @@ -53577,7 +53811,21 @@ msgstr "" #: doc/classes/SpatialMaterial.xml msgid "" "If [code]true[/code], lighting is calculated per vertex rather than per " -"pixel. This may increase performance on low-end devices." +"pixel. This may increase performance on low-end devices, especially for " +"meshes with a lower polygon count. The downside is that shading becomes much " +"less accurate, with visible linear interpolation between vertices that are " +"joined together. This can be compensated by ensuring meshes have a " +"sufficient level of subdivision (but not too much, to avoid reducing " +"performance). Some material features are also not supported when vertex " +"shading is enabled.\n" +"See also [member ProjectSettings.rendering/quality/shading/" +"force_vertex_shading] which can globally enable vertex shading on all " +"materials.\n" +"[b]Note:[/b] By default, vertex shading is enforced on mobile platforms by " +"[member ProjectSettings.rendering/quality/shading/force_vertex_shading]'s " +"[code]mobile[/code] override.\n" +"[b]Note:[/b] [member flags_vertex_lighting] has no effect if [member " +"flags_unshaded] is [code]true[/code]." msgstr "" #: doc/classes/SpatialMaterial.xml @@ -54381,7 +54629,10 @@ msgid "" "the text alignment to right.\n" "See [Range] class for more options over the [SpinBox].\n" "[b]Note:[/b] [SpinBox] relies on an underlying [LineEdit] node. To theme a " -"[SpinBox]'s background, add theme items for [LineEdit] and customize them." +"[SpinBox]'s background, add theme items for [LineEdit] and customize them.\n" +"[b]Note:[/b] If you want to implement drag and drop for the underlying " +"[LineEdit], you can use [method Control.set_drag_forwarding] on the node " +"returned by [method get_line_edit]." msgstr "" #: doc/classes/SpinBox.xml @@ -55701,7 +55952,6 @@ msgid "" "print(\"1.7\".is_valid_float()) # Prints \"True\"\n" "print(\"24\".is_valid_float()) # Prints \"True\"\n" "print(\"7e3\".is_valid_float()) # Prints \"True\"\n" -"print(\"24\".is_valid_float()) # Prints \"True\"\n" "print(\"Hello\".is_valid_float()) # Prints \"False\"\n" "[/codeblock]" msgstr "" @@ -55938,8 +56188,8 @@ msgid "" "var some_string = \"One,Two,Three,Four\"\n" "var some_array = some_string.rsplit(\",\", true, 1)\n" "print(some_array.size()) # Prints 2\n" -"print(some_array[0]) # Prints \"Four\"\n" -"print(some_array[1]) # Prints \"Three,Two,One\"\n" +"print(some_array[0]) # Prints \"One,Two,Three\"\n" +"print(some_array[1]) # Prints \"Four\"\n" "[/codeblock]" msgstr "" @@ -55972,9 +56222,9 @@ msgstr "" #: doc/classes/String.xml msgid "" "Returns the similarity index ([url=https://en.wikipedia.org/wiki/" -"S%C3%B8rensen%E2%80%93Dice_coefficient]Sorensen-Dice coefficient[/url]) this " -"string compared to another. 1.0 means totally similar and 0.0 means totally " -"dissimilar.\n" +"S%C3%B8rensen%E2%80%93Dice_coefficient]Sorensen-Dice coefficient[/url]) of " +"this string compared to another. A result of 1.0 means totally similar, " +"while 0.0 means totally dissimilar.\n" "[codeblock]\n" "print(\"ABC123\".similarity(\"ABC123\")) # Prints \"1\"\n" "print(\"ABC123\".similarity(\"XYZ456\")) # Prints \"0\"\n" @@ -57449,10 +57699,6 @@ msgid "" msgstr "" #: doc/classes/TextEdit.xml -msgid "Returns the selection begin column." -msgstr "" - -#: doc/classes/TextEdit.xml msgid "Returns the selection begin line." msgstr "" @@ -57461,10 +57707,6 @@ msgid "Returns the text inside the selection." msgstr "" #: doc/classes/TextEdit.xml -msgid "Returns the selection end column." -msgstr "" - -#: doc/classes/TextEdit.xml msgid "Returns the selection end line." msgstr "" @@ -58489,6 +58731,14 @@ msgid "" msgstr "" #: doc/classes/Theme.xml +msgid "" +"Adds an empty theme type for every valid data type.\n" +"[b]Note:[/b] Empty types are not saved with the theme. This method only " +"exists to perform in-memory changes to the resource. Use available " +"[code]set_*[/code] methods to add theme items." +msgstr "" + +#: doc/classes/Theme.xml msgid "Clears all values on the theme." msgstr "" @@ -58749,6 +58999,13 @@ msgstr "" #: doc/classes/Theme.xml msgid "" +"Removes the theme type, gracefully discarding defined theme items. If the " +"type is a variation, this information is also erased. If the type is a base " +"for type variations, those variations lose their base." +msgstr "" + +#: doc/classes/Theme.xml +msgid "" "Renames the [Color] at [code]old_name[/code] to [code]name[/code] if the " "theme has [code]node_type[/code]. If [code]name[/code] is already taken, " "this method fails." @@ -71474,6 +71731,11 @@ msgid "" msgstr "" #: modules/websocket/doc_classes/WebSocketServer.xml +msgid "" +"Sets additional headers to be sent to clients during the HTTP handshake." +msgstr "" + +#: modules/websocket/doc_classes/WebSocketServer.xml msgid "Stops the server and clear its state." msgstr "" @@ -71569,6 +71831,9 @@ msgid "" "\n" " webxr_interface = ARVRServer.find_interface(\"WebXR\")\n" " if webxr_interface:\n" +" # Map to the standard button/axis ids when possible.\n" +" webxr_interface.xr_standard_mapping = true\n" +"\n" " # WebXR uses a lot of asynchronous callbacks, so we connect to " "various\n" " # signals in order to receive them.\n" @@ -71794,6 +72059,13 @@ msgstr "" #: modules/webxr/doc_classes/WebXRInterface.xml msgid "" +"If set to true, the button and axes ids will be converted to match the " +"standard ids used by other AR/VR interfaces, when possible.\n" +"Otherwise, the ids will be passed through unaltered from WebXR." +msgstr "" + +#: modules/webxr/doc_classes/WebXRInterface.xml +msgid "" "Emitted to indicate that the reference space has been reset or " "reconfigured.\n" "When (or whether) this is emitted depends on the user's browser or device, " |