diff options
Diffstat (limited to 'doc/classes')
27 files changed, 185 insertions, 89 deletions
diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index 485c04da6d..0d6524ccbe 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -2647,7 +2647,7 @@ Additionally, other keywords can be included: [code]"exp"[/code] for exponential range editing, [code]"radians"[/code] for editing radian angles in degrees, [code]"degrees"[/code] to hint at an angle and [code]"hide_slider"[/code] to hide the slider. </constant> <constant name="PROPERTY_HINT_ENUM" value="2" enum="PropertyHint"> - Hints that an [int], [float], or [String] property is an enumerated value to pick in a list specified via a hint string. + Hints that an [int] or [String] property is an enumerated value to pick in a list specified via a hint string. The hint string is a comma separated list of names such as [code]"Hello,Something,Else"[/code]. Whitespaces are [b]not[/b] removed from either end of a name. For integer and float properties, the first name in the list has value 0, the next 1, and so on. Explicit values can also be specified by appending [code]:integer[/code] to the name, e.g. [code]"Zero,One,Three:3,Four,Six:6"[/code]. </constant> <constant name="PROPERTY_HINT_ENUM_SUGGESTION" value="3" enum="PropertyHint"> diff --git a/doc/classes/Animation.xml b/doc/classes/Animation.xml index c0626dcfe4..74ee13a3d2 100644 --- a/doc/classes/Animation.xml +++ b/doc/classes/Animation.xml @@ -104,6 +104,13 @@ [param stream] is the [AudioStream] resource to play. [param start_offset] is the number of seconds cut off at the beginning of the audio stream, while [param end_offset] is at the ending. </description> </method> + <method name="audio_track_is_use_blend" qualifiers="const"> + <return type="bool" /> + <param index="0" name="track_idx" type="int" /> + <description> + Returns [code]true[/code] if the track at [code]idx[/code] will be blended with other animations. + </description> + </method> <method name="audio_track_set_key_end_offset"> <return type="void" /> <param index="0" name="track_idx" type="int" /> @@ -131,6 +138,14 @@ Sets the stream of the key identified by [param key_idx] to value [param stream]. The [param track_idx] must be the index of an Audio Track. </description> </method> + <method name="audio_track_set_use_blend"> + <return type="void" /> + <param index="0" name="track_idx" type="int" /> + <param index="1" name="enable" type="bool" /> + <description> + Sets whether the track will be blended with other animations. If [code]true[/code], the audio playback volume changes depending on the blend value. + </description> + </method> <method name="bezier_track_get_key_in_handle" qualifiers="const"> <return type="Vector2" /> <param index="0" name="track_idx" type="int" /> diff --git a/doc/classes/AnimationNode.xml b/doc/classes/AnimationNode.xml index 6e3345b675..bc65e6013b 100644 --- a/doc/classes/AnimationNode.xml +++ b/doc/classes/AnimationNode.xml @@ -68,10 +68,10 @@ </description> </method> <method name="add_input"> - <return type="void" /> + <return type="bool" /> <param index="0" name="name" type="String" /> <description> - Adds an input to the node. This is only useful for nodes created for use in an [AnimationNodeBlendTree]. + Adds an input to the node. This is only useful for nodes created for use in an [AnimationNodeBlendTree]. If the addition fails, returns [code]false[/code]. </description> </method> <method name="blend_animation"> @@ -115,13 +115,20 @@ Blend another animation node (in case this node contains children animation nodes). This function is only useful if you inherit from [AnimationRootNode] instead, else editors will not display your node for addition. </description> </method> + <method name="find_input" qualifiers="const"> + <return type="int" /> + <param index="0" name="name" type="String" /> + <description> + Returns the input index which corresponds to [param name]. If not found, returns [code]-1[/code]. + </description> + </method> <method name="get_input_count" qualifiers="const"> <return type="int" /> <description> Amount of inputs in this node, only useful for nodes that go into [AnimationNodeBlendTree]. </description> </method> - <method name="get_input_name"> + <method name="get_input_name" qualifiers="const"> <return type="String" /> <param index="0" name="input" type="int" /> <description> @@ -157,6 +164,14 @@ Adds or removes a path for the filter. </description> </method> + <method name="set_input_name"> + <return type="bool" /> + <param index="0" name="input" type="int" /> + <param index="1" name="name" type="String" /> + <description> + Sets the name of the input at the given [param input] index. If the setting fails, returns [code]false[/code]. + </description> + </method> <method name="set_parameter"> <return type="void" /> <param index="0" name="name" type="StringName" /> diff --git a/doc/classes/AnimationNodeTransition.xml b/doc/classes/AnimationNodeTransition.xml index 90bae41586..a067b0a9ba 100644 --- a/doc/classes/AnimationNodeTransition.xml +++ b/doc/classes/AnimationNodeTransition.xml @@ -12,18 +12,11 @@ <link title="Third Person Shooter Demo">https://godotengine.org/asset-library/asset/678</link> </tutorials> <methods> - <method name="find_input_caption" qualifiers="const"> - <return type="int" /> - <param index="0" name="caption" type="String" /> - <description> - Returns the input index which corresponds to [param caption]. If not found, returns [code]-1[/code]. - </description> - </method> - <method name="get_input_caption" qualifiers="const"> - <return type="String" /> + <method name="is_input_reset" qualifiers="const"> + <return type="bool" /> <param index="0" name="input" type="int" /> <description> - Returns the name of the input at the given [param input] index. This name is displayed in the editor next to the node input. + Returns whether the animation restarts when the animation transitions from the other animation. </description> </method> <method name="is_input_set_as_auto_advance" qualifiers="const"> @@ -41,21 +34,18 @@ Enables or disables auto-advance for the given [param input] index. If enabled, state changes to the next input after playing the animation once. If enabled for the last input state, it loops to the first. </description> </method> - <method name="set_input_caption"> + <method name="set_input_reset"> <return type="void" /> <param index="0" name="input" type="int" /> - <param index="1" name="caption" type="String" /> + <param index="1" name="enable" type="bool" /> <description> - Sets the name of the input at the given [param input] index. This name is displayed in the editor next to the node input. + If [code]true[/code], the destination animation is restarted when the animation transitions. </description> </method> </methods> <members> - <member name="enabled_inputs" type="int" setter="set_enabled_inputs" getter="get_enabled_inputs" default="0"> - The number of enabled input ports for this node. The maximum is [code]31[/code]. - </member> - <member name="reset" type="bool" setter="set_reset" getter="is_reset" default="true"> - If [code]true[/code], the destination animation is played back from the beginning when switched. + <member name="input_count" type="int" setter="set_input_count" getter="get_input_count" default="0"> + The number of enabled input ports for this node. </member> <member name="xfade_curve" type="Curve" setter="set_xfade_curve" getter="get_xfade_curve"> Determines how cross-fading between animations is eased. If empty, the transition will be linear. diff --git a/doc/classes/AnimationPlayer.xml b/doc/classes/AnimationPlayer.xml index 8982eeedb2..25e4a4549d 100644 --- a/doc/classes/AnimationPlayer.xml +++ b/doc/classes/AnimationPlayer.xml @@ -232,6 +232,10 @@ <member name="assigned_animation" type="String" setter="set_assigned_animation" getter="get_assigned_animation"> If playing, the the current animation's key, otherwise, the animation last played. When set, this changes the animation, but will not play it unless already playing. See also [member current_animation]. </member> + <member name="audio_max_polyphony" type="int" setter="set_audio_max_polyphony" getter="get_audio_max_polyphony" default="32"> + The number of possible simultaneous sounds for each of the assigned AudioStreamPlayers. + For example, if this value is [code]32[/code] and the animation has two audio tracks, the two [AudioStreamPlayer]s assigned can play simultaneously up to [code]32[/code] voices each. + </member> <member name="autoplay" type="String" setter="set_autoplay" getter="get_autoplay" default=""""> The key of the animation to play when the scene loads. </member> diff --git a/doc/classes/AnimationTree.xml b/doc/classes/AnimationTree.xml index 3a3e8bb1fa..86562c340d 100644 --- a/doc/classes/AnimationTree.xml +++ b/doc/classes/AnimationTree.xml @@ -110,6 +110,10 @@ <member name="anim_player" type="NodePath" setter="set_animation_player" getter="get_animation_player" default="NodePath("")"> The path to the [AnimationPlayer] used for animating. </member> + <member name="audio_max_polyphony" type="int" setter="set_audio_max_polyphony" getter="get_audio_max_polyphony" default="32"> + The number of possible simultaneous sounds for each of the assigned AudioStreamPlayers. + For example, if this value is [code]32[/code] and the animation has two audio tracks, the two [AudioStreamPlayer]s assigned can play simultaneously up to [code]32[/code] voices each. + </member> <member name="process_callback" type="int" setter="set_process_callback" getter="get_process_callback" enum="AnimationTree.AnimationProcessCallback" default="1"> The process mode of this [AnimationTree]. See [enum AnimationProcessCallback] for available modes. </member> diff --git a/doc/classes/Array.xml b/doc/classes/Array.xml index 1ac1c0745e..9be5e60f4a 100644 --- a/doc/classes/Array.xml +++ b/doc/classes/Array.xml @@ -59,7 +59,7 @@ <param index="2" name="class_name" type="StringName" /> <param index="3" name="script" type="Variant" /> <description> - Creates a typed array from the [param base] array. The base array can't be already typed. See [method set_typed] for more details. + Creates a typed array from the [param base] array. The base array can't be already typed. </description> </constructor> <constructor name="Array"> @@ -530,16 +530,6 @@ Searches the array in reverse order. Optionally, a start search index can be passed. If negative, the start index is considered relative to the end of the array. </description> </method> - <method name="set_typed"> - <return type="void" /> - <param index="0" name="type" type="int" /> - <param index="1" name="class_name" type="StringName" /> - <param index="2" name="script" type="Variant" /> - <description> - Makes the [Array] typed. The [param type] should be one of the [enum Variant.Type] constants. [param class_name] is optional and can only be provided for [constant TYPE_OBJECT]. [param script] can only be provided if [param class_name] is not empty. - The method fails if an array is already typed. - </description> - </method> <method name="shuffle"> <return type="void" /> <description> diff --git a/doc/classes/AudioStreamPlayer.xml b/doc/classes/AudioStreamPlayer.xml index 06e183f4e2..9b3a4f7bba 100644 --- a/doc/classes/AudioStreamPlayer.xml +++ b/doc/classes/AudioStreamPlayer.xml @@ -28,6 +28,12 @@ Returns the [AudioStreamPlayback] object associated with this [AudioStreamPlayer]. </description> </method> + <method name="has_stream_playback"> + <return type="bool" /> + <description> + Returns whether the [AudioStreamPlayer] can return the [AudioStreamPlayback] object or not. + </description> + </method> <method name="play"> <return type="void" /> <param index="0" name="from_position" type="float" default="0.0" /> diff --git a/doc/classes/AudioStreamPlayer2D.xml b/doc/classes/AudioStreamPlayer2D.xml index 81755b580f..18869e87cb 100644 --- a/doc/classes/AudioStreamPlayer2D.xml +++ b/doc/classes/AudioStreamPlayer2D.xml @@ -25,6 +25,12 @@ Returns the [AudioStreamPlayback] object associated with this [AudioStreamPlayer2D]. </description> </method> + <method name="has_stream_playback"> + <return type="bool" /> + <description> + Returns whether the [AudioStreamPlayer] can return the [AudioStreamPlayback] object or not. + </description> + </method> <method name="play"> <return type="void" /> <param index="0" name="from_position" type="float" default="0.0" /> diff --git a/doc/classes/AudioStreamPlayer3D.xml b/doc/classes/AudioStreamPlayer3D.xml index f711210ca1..d5a06dcad6 100644 --- a/doc/classes/AudioStreamPlayer3D.xml +++ b/doc/classes/AudioStreamPlayer3D.xml @@ -25,6 +25,12 @@ Returns the [AudioStreamPlayback] object associated with this [AudioStreamPlayer3D]. </description> </method> + <method name="has_stream_playback"> + <return type="bool" /> + <description> + Returns whether the [AudioStreamPlayer] can return the [AudioStreamPlayback] object or not. + </description> + </method> <method name="play"> <return type="void" /> <param index="0" name="from_position" type="float" default="0.0" /> diff --git a/doc/classes/DTLSServer.xml b/doc/classes/DTLSServer.xml index 457513b8aa..a3a0b0456c 100644 --- a/doc/classes/DTLSServer.xml +++ b/doc/classes/DTLSServer.xml @@ -148,11 +148,9 @@ <methods> <method name="setup"> <return type="int" enum="Error" /> - <param index="0" name="key" type="CryptoKey" /> - <param index="1" name="certificate" type="X509Certificate" /> - <param index="2" name="chain" type="X509Certificate" default="null" /> + <param index="0" name="server_options" type="TLSOptions" /> <description> - Setup the DTLS server to use the given [param key] and provide the given [param certificate] to clients. You can pass the optional [param chain] parameter to provide additional CA chain information along with the certificate. + Setup the DTLS server to use the given [param server_options]. See [method TLSOptions.server]. </description> </method> <method name="take_connection"> diff --git a/doc/classes/Dictionary.xml b/doc/classes/Dictionary.xml index ea0bcc5cbb..776a9f6fc1 100644 --- a/doc/classes/Dictionary.xml +++ b/doc/classes/Dictionary.xml @@ -286,7 +286,7 @@ <method name="make_read_only"> <return type="void" /> <description> - Makes the dictionary read-only, i.e. disabled modifying of the dictionary's contents. Does not apply to nested content, e.g. content of nested dicitonaries. + Makes the dictionary read-only, i.e. disables modification of the dictionary's contents. Does not apply to nested content, e.g. content of nested dictionaries. </description> </method> <method name="merge"> diff --git a/doc/classes/EditorImportPlugin.xml b/doc/classes/EditorImportPlugin.xml index c395815117..ec9efcc9c4 100644 --- a/doc/classes/EditorImportPlugin.xml +++ b/doc/classes/EditorImportPlugin.xml @@ -37,8 +37,8 @@ return [{"name": "my_option", "default_value": false}] func _import(source_file, save_path, options, platform_variants, gen_files): - var file = File.new() - if file.open(source_file, File.READ) != OK: + var file = FileAccess.open(source_file, FileAccess.READ) + if file == null: return FAILED var mesh = ArrayMesh.new() # Fill the Mesh with data read in "file", left as an exercise to the reader. diff --git a/doc/classes/EditorSettings.xml b/doc/classes/EditorSettings.xml index 9015a12b43..72843eb157 100644 --- a/doc/classes/EditorSettings.xml +++ b/doc/classes/EditorSettings.xml @@ -607,6 +607,10 @@ <member name="interface/theme/draw_extra_borders" type="bool" setter="" getter=""> If [code]true[/code], draws additional borders around interactive UI elements in the editor. This is automatically enabled when using the [b]Black (OLED)[/b] theme preset, as this theme preset uses a fully black background. </member> + <member name="interface/theme/enable_touchscreen_touch_area" type="bool" setter="" getter=""> + If [code]true[/code], increases the touch area for the UI elements to improve usability on touchscreen devices. + [b]Note:[/b] Defaults to [code]true[/code] on touchscreen devices. + </member> <member name="interface/theme/icon_and_font_color" type="int" setter="" getter=""> The icon and font color scheme to use in the editor. - [b]Auto[/b] determines the color scheme to use automatically based on [member interface/theme/base_color]. diff --git a/doc/classes/EditorTranslationParserPlugin.xml b/doc/classes/EditorTranslationParserPlugin.xml index df10c645ef..89746363d8 100644 --- a/doc/classes/EditorTranslationParserPlugin.xml +++ b/doc/classes/EditorTranslationParserPlugin.xml @@ -15,8 +15,7 @@ extends EditorTranslationParserPlugin func _parse_file(path, msgids, msgids_context_plural): - var file = File.new() - file.open(path, File.READ) + var file = FileAccess.open(path, FileAccess.READ) var text = file.get_as_text() var split_strs = text.split(",", false) for s in split_strs: diff --git a/doc/classes/HTTPClient.xml b/doc/classes/HTTPClient.xml index b3ed38d250..b7a5cff694 100644 --- a/doc/classes/HTTPClient.xml +++ b/doc/classes/HTTPClient.xml @@ -30,13 +30,10 @@ <return type="int" enum="Error" /> <param index="0" name="host" type="String" /> <param index="1" name="port" type="int" default="-1" /> - <param index="2" name="use_tls" type="bool" default="false" /> - <param index="3" name="verify_host" type="bool" default="true" /> + <param index="2" name="tls_options" type="TLSOptions" default="null" /> <description> Connects to a host. This needs to be done before any requests are sent. - The host should not have http:// prepended but will strip the protocol identifier if provided. - If no [param port] is specified (or [code]-1[/code] is used), it is automatically set to 80 for HTTP and 443 for HTTPS (if [param use_tls] is enabled). - [param verify_host] will check the TLS identity of the host if set to [code]true[/code]. + If no [param port] is specified (or [code]-1[/code] is used), it is automatically set to 80 for HTTP and 443 for HTTPS. You can pass the optional [param tls_options] parameter to customize the trusted certification authorities, or the common name verification when using HTTPS. See [method TLSOptions.client] and [method TLSOptions.client_unsafe]. </description> </method> <method name="get_response_body_length" qualifiers="const"> diff --git a/doc/classes/HTTPRequest.xml b/doc/classes/HTTPRequest.xml index 3dbc024b14..d403acf90c 100644 --- a/doc/classes/HTTPRequest.xml +++ b/doc/classes/HTTPRequest.xml @@ -187,9 +187,8 @@ <return type="int" enum="Error" /> <param index="0" name="url" type="String" /> <param index="1" name="custom_headers" type="PackedStringArray" default="PackedStringArray()" /> - <param index="2" name="tls_validate_domain" type="bool" default="true" /> - <param index="3" name="method" type="int" enum="HTTPClient.Method" default="0" /> - <param index="4" name="request_data" type="String" default="""" /> + <param index="2" name="method" type="int" enum="HTTPClient.Method" default="0" /> + <param index="3" name="request_data" type="String" default="""" /> <description> Creates request on the underlying [HTTPClient]. If there is no configuration errors, it tries to connect using [method HTTPClient.connect_to_host] and passes parameters onto [method HTTPClient.request]. Returns [constant OK] if request is successfully created. (Does not imply that the server has responded), [constant ERR_UNCONFIGURED] if not in the tree, [constant ERR_BUSY] if still processing previous request, [constant ERR_INVALID_PARAMETER] if given string is not a valid URL format, or [constant ERR_CANT_CONNECT] if not using thread and the [HTTPClient] cannot connect to host. @@ -201,9 +200,8 @@ <return type="int" enum="Error" /> <param index="0" name="url" type="String" /> <param index="1" name="custom_headers" type="PackedStringArray" default="PackedStringArray()" /> - <param index="2" name="tls_validate_domain" type="bool" default="true" /> - <param index="3" name="method" type="int" enum="HTTPClient.Method" default="0" /> - <param index="4" name="request_data_raw" type="PackedByteArray" default="PackedByteArray()" /> + <param index="2" name="method" type="int" enum="HTTPClient.Method" default="0" /> + <param index="3" name="request_data_raw" type="PackedByteArray" default="PackedByteArray()" /> <description> Creates request on the underlying [HTTPClient] using a raw array of bytes for the request body. If there is no configuration errors, it tries to connect using [method HTTPClient.connect_to_host] and passes parameters onto [method HTTPClient.request]. Returns [constant OK] if request is successfully created. (Does not imply that the server has responded), [constant ERR_UNCONFIGURED] if not in the tree, [constant ERR_BUSY] if still processing previous request, [constant ERR_INVALID_PARAMETER] if given string is not a valid URL format, or [constant ERR_CANT_CONNECT] if not using thread and the [HTTPClient] cannot connect to host. @@ -227,6 +225,13 @@ The proxy server is unset if [param host] is empty or [param port] is -1. </description> </method> + <method name="set_tls_options"> + <return type="void" /> + <param index="0" name="client_options" type="TLSOptions" /> + <description> + Sets the [TLSOptions] to be used when connecting to an HTTPS server. See [method TLSOptions.client]. + </description> + </method> </methods> <members> <member name="accept_gzip" type="bool" setter="set_accept_gzip" getter="is_accepting_gzip" default="true"> diff --git a/doc/classes/HashingContext.xml b/doc/classes/HashingContext.xml index 6e3092e618..7c2be6f817 100644 --- a/doc/classes/HashingContext.xml +++ b/doc/classes/HashingContext.xml @@ -11,15 +11,14 @@ const CHUNK_SIZE = 102 func hash_file(path): - var ctx = HashingContext.new() - var file = File.new() - # Start a SHA-256 context. - ctx.start(HashingContext.HASH_SHA256) # Check that file exists. - if not file.file_exists(path): + if not FileAccess.file_exists(path): return + # Start a SHA-256 context. + var ctx = HashingContext.new() + ctx.start(HashingContext.HASH_SHA256) # Open the file to hash. - file.open(path, File.READ) + var file = FileAccess.open(path, FileAccess.READ) # Update the context after reading each chunk. while not file.eof_reached(): ctx.update(file.get_buffer(CHUNK_SIZE)) diff --git a/doc/classes/Label3D.xml b/doc/classes/Label3D.xml index 0cbca2224e..fb3c949e48 100644 --- a/doc/classes/Label3D.xml +++ b/doc/classes/Label3D.xml @@ -35,6 +35,9 @@ <member name="alpha_cut" type="int" setter="set_alpha_cut_mode" getter="get_alpha_cut_mode" enum="Label3D.AlphaCutMode" default="0"> The alpha cutting mode to use for the sprite. See [enum AlphaCutMode] for possible values. </member> + <member name="alpha_hash_scale" type="float" setter="set_alpha_hash_scale" getter="get_alpha_hash_scale" default="1.0"> + The hashing scale for Alpha Hash. Recommended values between [code]0[/code] and [code]2[/code]. + </member> <member name="alpha_scissor_threshold" type="float" setter="set_alpha_scissor_threshold" getter="get_alpha_scissor_threshold" default="0.5"> Threshold at which the alpha scissor will discard values. </member> @@ -152,5 +155,8 @@ This mode draws fully opaque pixels in the depth prepass. This is slower than [constant ALPHA_CUT_DISABLED] or [constant ALPHA_CUT_DISCARD], but it allows displaying translucent areas and smooth edges while using proper sorting. [b]Note:[/b] When using text with overlapping glyphs (e.g., cursive scripts), this mode might have transparency sorting issues between the main text and the outline. </constant> + <constant name="ALPHA_CUT_HASH" value="3" enum="AlphaCutMode"> + This mode draws cuts off all values below a spatially-deterministic threshold, the rest will remain opaque. + </constant> </constants> </class> diff --git a/doc/classes/NavigationServer2D.xml b/doc/classes/NavigationServer2D.xml index 95e3fded36..16f6de5238 100644 --- a/doc/classes/NavigationServer2D.xml +++ b/doc/classes/NavigationServer2D.xml @@ -41,12 +41,10 @@ <method name="agent_set_callback"> <return type="void" /> <param index="0" name="agent" type="RID" /> - <param index="1" name="object_id" type="int" /> - <param index="2" name="method" type="StringName" /> - <param index="3" name="userdata" type="Variant" default="null" /> + <param index="1" name="callback" type="Callable" /> <description> - Sets the callback [param object_id] and [param method] that gets called after each avoidance processing step for the [param agent]. The calculated [code]safe_velocity[/code] will be dispatched with a signal to the object just before the physics calculations. - [b]Note:[/b] Created callbacks are always processed independently of the SceneTree state as long as the agent is on a navigation map and not freed. To disable the dispatch of a callback from an agent use [method agent_set_callback] again with a [code]0[/code] ObjectID as the [param object_id]. + Sets the callback that gets called after each avoidance processing step for the [param agent]. The calculated [code]safe_velocity[/code] will be passed as the first parameter just before the physics calculations. + [b]Note:[/b] Created callbacks are always processed independently of the SceneTree state as long as the agent is on a navigation map and not freed. To disable the dispatch of a callback from an agent use [method agent_set_callback] again with an empty [Callable]. </description> </method> <method name="agent_set_map"> diff --git a/doc/classes/NavigationServer3D.xml b/doc/classes/NavigationServer3D.xml index fd20f780b3..340821d41e 100644 --- a/doc/classes/NavigationServer3D.xml +++ b/doc/classes/NavigationServer3D.xml @@ -41,12 +41,10 @@ <method name="agent_set_callback"> <return type="void" /> <param index="0" name="agent" type="RID" /> - <param index="1" name="object_id" type="int" /> - <param index="2" name="method" type="StringName" /> - <param index="3" name="userdata" type="Variant" default="null" /> + <param index="1" name="callback" type="Callable" /> <description> - Sets the callback [param object_id] and [param method] that gets called after each avoidance processing step for the [param agent]. The calculated [code]safe_velocity[/code] will be dispatched with a signal to the object just before the physics calculations. - [b]Note:[/b] Created callbacks are always processed independently of the SceneTree state as long as the agent is on a navigation map and not freed. To disable the dispatch of a callback from an agent use [method agent_set_callback] again with a [code]0[/code] ObjectID as the [param object_id]. + Sets the callback that gets called after each avoidance processing step for the [param agent]. The calculated [code]safe_velocity[/code] will be passed as the first parameter just before the physics calculations. + [b]Note:[/b] Created callbacks are always processed independently of the SceneTree state as long as the agent is on a navigation map and not freed. To disable the dispatch of a callback from an agent use [method agent_set_callback] again with an empty [Callable]. </description> </method> <method name="agent_set_map"> diff --git a/doc/classes/OS.xml b/doc/classes/OS.xml index 0058bf8a2f..04895c28a8 100644 --- a/doc/classes/OS.xml +++ b/doc/classes/OS.xml @@ -498,7 +498,7 @@ <description> Returns [code]true[/code] if the Godot binary used to run the project is a [i]debug[/i] export template, or when running in the editor. Returns [code]false[/code] if the Godot binary used to run the project is a [i]release[/i] export template. - To check whether the Godot binary used to run the project is an export template (debug or release), use [code]OS.has_feature("standalone")[/code] instead. + To check whether the Godot binary used to run the project is an export template (debug or release), use [code]OS.has_feature("template")[/code] instead. </description> </method> <method name="is_keycode_unicode" qualifiers="const"> diff --git a/doc/classes/PacketPeerDTLS.xml b/doc/classes/PacketPeerDTLS.xml index db8403a56b..19c5d0e287 100644 --- a/doc/classes/PacketPeerDTLS.xml +++ b/doc/classes/PacketPeerDTLS.xml @@ -14,11 +14,10 @@ <method name="connect_to_peer"> <return type="int" enum="Error" /> <param index="0" name="packet_peer" type="PacketPeerUDP" /> - <param index="1" name="validate_certs" type="bool" default="true" /> - <param index="2" name="for_hostname" type="String" default="""" /> - <param index="3" name="valid_certificate" type="X509Certificate" default="null" /> + <param index="1" name="hostname" type="String" /> + <param index="2" name="client_options" type="TLSOptions" default="null" /> <description> - Connects a [param packet_peer] beginning the DTLS handshake using the underlying [PacketPeerUDP] which must be connected (see [method PacketPeerUDP.connect_to_host]). If [param validate_certs] is [code]true[/code], [PacketPeerDTLS] will validate that the certificate presented by the remote peer and match it with the [param for_hostname] argument. You can specify a custom [X509Certificate] to use for validation via the [param valid_certificate] argument. + Connects a [param packet_peer] beginning the DTLS handshake using the underlying [PacketPeerUDP] which must be connected (see [method PacketPeerUDP.connect_to_host]). You can optionally specify the [param client_options] to be used while verifying the TLS connections. See [method TLSOptions.client] and [method TLSOptions.client_unsafe]. </description> </method> <method name="disconnect_from_peer"> diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index 430f1c60fd..fa381adbb3 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -408,8 +408,11 @@ <member name="debug/gdscript/warnings/incompatible_ternary" type="int" setter="" getter="" default="1"> When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when a ternary operator may emit values with incompatible types. </member> - <member name="debug/gdscript/warnings/int_assigned_to_enum" type="int" setter="" getter="" default="1"> - When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when trying to assign an integer to a variable that expects an enum value. + <member name="debug/gdscript/warnings/int_as_enum_without_cast" type="int" setter="" getter="" default="1"> + When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when trying to use an integer as an enum without an explicit cast. + </member> + <member name="debug/gdscript/warnings/int_as_enum_without_match" type="int" setter="" getter="" default="1"> + When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when trying to use an integer as an enum when there is no matching enum member for that numeric value. </member> <member name="debug/gdscript/warnings/integer_division" type="int" setter="" getter="" default="1"> When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when dividing an integer by another integer (the decimal part will be discarded). diff --git a/doc/classes/SpriteBase3D.xml b/doc/classes/SpriteBase3D.xml index 5fa984e7a0..7ff45edcbc 100644 --- a/doc/classes/SpriteBase3D.xml +++ b/doc/classes/SpriteBase3D.xml @@ -41,6 +41,12 @@ <member name="alpha_cut" type="int" setter="set_alpha_cut_mode" getter="get_alpha_cut_mode" enum="SpriteBase3D.AlphaCutMode" default="0"> The alpha cutting mode to use for the sprite. See [enum AlphaCutMode] for possible values. </member> + <member name="alpha_hash_scale" type="float" setter="set_alpha_hash_scale" getter="get_alpha_hash_scale" default="1.0"> + The hashing scale for Alpha Hash. Recommended values between [code]0[/code] and [code]2[/code]. + </member> + <member name="alpha_scissor_threshold" type="float" setter="set_alpha_scissor_threshold" getter="get_alpha_scissor_threshold" default="0.5"> + Threshold at which the alpha scissor will discard values. + </member> <member name="axis" type="int" setter="set_axis" getter="get_axis" enum="Vector3.Axis" default="2"> The direction in which the front of the texture faces. </member> @@ -118,5 +124,8 @@ <constant name="ALPHA_CUT_OPAQUE_PREPASS" value="2" enum="AlphaCutMode"> This mode draws fully opaque pixels in the depth prepass. This is slower than [constant ALPHA_CUT_DISABLED] or [constant ALPHA_CUT_DISCARD], but it allows displaying translucent areas and smooth edges while using proper sorting. </constant> + <constant name="ALPHA_CUT_HASH" value="3" enum="AlphaCutMode"> + This mode draws cuts off all values below a spatially-deterministic threshold, the rest will remain opaque. + </constant> </constants> </class> diff --git a/doc/classes/StreamPeerTLS.xml b/doc/classes/StreamPeerTLS.xml index d1ddb3d441..9e16dc8914 100644 --- a/doc/classes/StreamPeerTLS.xml +++ b/doc/classes/StreamPeerTLS.xml @@ -14,22 +14,18 @@ <method name="accept_stream"> <return type="int" enum="Error" /> <param index="0" name="stream" type="StreamPeer" /> - <param index="1" name="private_key" type="CryptoKey" /> - <param index="2" name="certificate" type="X509Certificate" /> - <param index="3" name="chain" type="X509Certificate" default="null" /> + <param index="1" name="server_options" type="TLSOptions" /> <description> - Accepts a peer connection as a server using the given [param private_key] and providing the given [param certificate] to the client. You can pass the optional [param chain] parameter to provide additional CA chain information along with the certificate. + Accepts a peer connection as a server using the given [param server_options]. See [method TLSOptions.server]. </description> </method> <method name="connect_to_stream"> <return type="int" enum="Error" /> <param index="0" name="stream" type="StreamPeer" /> - <param index="1" name="validate_certs" type="bool" default="false" /> - <param index="2" name="for_hostname" type="String" default="""" /> - <param index="3" name="valid_certificate" type="X509Certificate" default="null" /> + <param index="1" name="common_name" type="String" /> + <param index="2" name="client_options" type="TLSOptions" default="null" /> <description> - Connects to a peer using an underlying [StreamPeer] [param stream]. If [param validate_certs] is [code]true[/code], [StreamPeerTLS] will validate that the certificate presented by the peer matches the [param for_hostname]. - [b]Note:[/b] Specifying a custom [param valid_certificate] is not supported in Web exports due to browsers restrictions. + Connects to a peer using an underlying [StreamPeer] [param stream] and verifying the remote certificate is correctly signed for the given [param common_name]. You can pass the optional [param client_options] parameter to customize the trusted certification authorities, or disable the common name verification. See [method TLSOptions.client] and [method TLSOptions.client_unsafe]. </description> </method> <method name="disconnect_from_stream"> @@ -57,10 +53,6 @@ </description> </method> </methods> - <members> - <member name="blocking_handshake" type="bool" setter="set_blocking_handshake_enabled" getter="is_blocking_handshake_enabled" default="true"> - </member> - </members> <constants> <constant name="STATUS_DISCONNECTED" value="0" enum="Status"> A status representing a [StreamPeerTLS] that is disconnected. diff --git a/doc/classes/TLSOptions.xml b/doc/classes/TLSOptions.xml new file mode 100644 index 0000000000..0917bd9bce --- /dev/null +++ b/doc/classes/TLSOptions.xml @@ -0,0 +1,53 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="TLSOptions" inherits="RefCounted" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + TLS configuration for clients and servers. + </brief_description> + <description> + TLSOptions abstracts the configuration options for the [StreamPeerTLS] and [PacketPeerDTLS] classes. + Objects of this class cannot be instantiated directly, and one of the static methods [method client], [method client_unsafe], or [method server] should be used instead. + [codeblocks] + [gdscript] + # Create a TLS client configuration which uses our custom trusted CA chain. + var client_trusted_cas = load("res://my_trusted_cas.crt") + var client_tls_options = TLSOptions.client(client_trusted_cas) + + # Create a TLS server configuration. + var server_certs = load("res://my_server_cas.crt") + var server_key = load("res://my_server_key.key") + var server_tls_options = TLSOptions.server(server_certs, server_key) + [/gdscript] + [/codeblocks] + </description> + <tutorials> + </tutorials> + <methods> + <method name="client" qualifiers="static"> + <return type="TLSOptions" /> + <param index="0" name="trusted_chain" type="X509Certificate" default="null" /> + <param index="1" name="common_name_override" type="String" default="""" /> + <description> + Creates a TLS client configuration which validates certificates and their common names (fully qualified domain names). + You can specify a custom [param trusted_chain] of certification authorities (the default CA list will be used if [code]null[/code]), and optionally provide a [param common_name_override] if you expect the certificate to have a common name other then the server FQDN. + Note: On the Web plafrom, TLS verification is always enforced against the CA list of the web browser. This is considered a security feature. + </description> + </method> + <method name="client_unsafe" qualifiers="static"> + <return type="TLSOptions" /> + <param index="0" name="trusted_chain" type="X509Certificate" default="null" /> + <description> + Creates an [b]unsafe[/b] TLS client configuration where certificate validation is optional. You can optionally provide a valid [param trusted_chain], but the common name of the certififcates will never be checked. Using this configuration for purposes other than testing [b]is not recommended[/b]. + Note: On the Web plafrom, TLS verification is always enforced against the CA list of the web browser. This is considered a security feature. + </description> + </method> + <method name="server" qualifiers="static"> + <return type="TLSOptions" /> + <param index="0" name="key" type="CryptoKey" /> + <param index="1" name="certificate" type="X509Certificate" /> + <description> + Creates a TLS server configuration using the provided [param key] and [param certificate]. + Note: The [param certificate] should include the full certificate chain up to the signing CA (certificates file can be concatenated using a general purpose text editor). + </description> + </method> + </methods> +</class> |