diff options
Diffstat (limited to 'doc/classes')
39 files changed, 537 insertions, 140 deletions
diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index d2c6a853ad..5a53e7cb05 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -29,6 +29,8 @@ <member name="Geometry" type="Geometry" setter="" getter=""> [Geometry] singleton </member> + <member name="GodotSharp" type="GodotSharp" setter="" getter=""> + </member> <member name="IP" type="IP" setter="" getter=""> [IP] singleton </member> diff --git a/doc/classes/Area.xml b/doc/classes/Area.xml index 5c56b5e21b..970d09a2ac 100644 --- a/doc/classes/Area.xml +++ b/doc/classes/Area.xml @@ -142,14 +142,14 @@ </members> <signals> <signal name="area_entered"> - <argument index="0" name="area" type="Object"> + <argument index="0" name="area" type="Area"> </argument> <description> Emitted when another area enters. </description> </signal> <signal name="area_exited"> - <argument index="0" name="area" type="Object"> + <argument index="0" name="area" type="Area"> </argument> <description> Emitted when another area exits. @@ -158,7 +158,7 @@ <signal name="area_shape_entered"> <argument index="0" name="area_id" type="int"> </argument> - <argument index="1" name="area" type="Object"> + <argument index="1" name="area" type="Area"> </argument> <argument index="2" name="area_shape" type="int"> </argument> @@ -171,7 +171,7 @@ <signal name="area_shape_exited"> <argument index="0" name="area_id" type="int"> </argument> - <argument index="1" name="area" type="Object"> + <argument index="1" name="area" type="Area"> </argument> <argument index="2" name="area_shape" type="int"> </argument> @@ -182,14 +182,14 @@ </description> </signal> <signal name="body_entered"> - <argument index="0" name="body" type="Object"> + <argument index="0" name="body" type="Node"> </argument> <description> Emitted when a [PhysicsBody] object enters. </description> </signal> <signal name="body_exited"> - <argument index="0" name="body" type="Object"> + <argument index="0" name="body" type="Node"> </argument> <description> Emitted when a [PhysicsBody] object exits. @@ -198,7 +198,7 @@ <signal name="body_shape_entered"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Object"> + <argument index="1" name="body" type="Node"> </argument> <argument index="2" name="body_shape" type="int"> </argument> @@ -211,7 +211,7 @@ <signal name="body_shape_exited"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Object"> + <argument index="1" name="body" type="Node"> </argument> <argument index="2" name="body_shape" type="int"> </argument> diff --git a/doc/classes/Area2D.xml b/doc/classes/Area2D.xml index c50ccefc4c..b77a931201 100644 --- a/doc/classes/Area2D.xml +++ b/doc/classes/Area2D.xml @@ -130,14 +130,14 @@ </members> <signals> <signal name="area_entered"> - <argument index="0" name="area" type="Object"> + <argument index="0" name="area" type="Area2D"> </argument> <description> Emitted when another area enters. </description> </signal> <signal name="area_exited"> - <argument index="0" name="area" type="Object"> + <argument index="0" name="area" type="Area2D"> </argument> <description> Emitted when another area exits. @@ -146,7 +146,7 @@ <signal name="area_shape_entered"> <argument index="0" name="area_id" type="int"> </argument> - <argument index="1" name="area" type="Object"> + <argument index="1" name="area" type="Area2D"> </argument> <argument index="2" name="area_shape" type="int"> </argument> @@ -159,7 +159,7 @@ <signal name="area_shape_exited"> <argument index="0" name="area_id" type="int"> </argument> - <argument index="1" name="area" type="Object"> + <argument index="1" name="area" type="Area2D"> </argument> <argument index="2" name="area_shape" type="int"> </argument> @@ -170,14 +170,14 @@ </description> </signal> <signal name="body_entered"> - <argument index="0" name="body" type="Object"> + <argument index="0" name="body" type="PhysicsBody2D"> </argument> <description> Emitted when a [PhysicsBody2D] object enters. </description> </signal> <signal name="body_exited"> - <argument index="0" name="body" type="Object"> + <argument index="0" name="body" type="PhysicsBody2D"> </argument> <description> Emitted when a [PhysicsBody2D] object exits. @@ -186,7 +186,7 @@ <signal name="body_shape_entered"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Object"> + <argument index="1" name="body" type="PhysicsBody2D"> </argument> <argument index="2" name="body_shape" type="int"> </argument> @@ -199,7 +199,7 @@ <signal name="body_shape_exited"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Object"> + <argument index="1" name="body" type="PhysicsBody2D"> </argument> <argument index="2" name="body_shape" type="int"> </argument> diff --git a/doc/classes/Array.xml b/doc/classes/Array.xml index 9c5ae8ebd0..162e2d3e05 100644 --- a/doc/classes/Array.xml +++ b/doc/classes/Array.xml @@ -216,7 +216,7 @@ <argument index="1" name="value" type="var"> </argument> <description> - Insert a new element at a given position in the array. The position must be valid, or at the end of the array (pos==size()). + Insert a new element at a given position in the array. The position must be valid, or at the end of the array ([code]pos == size()[/code]). </description> </method> <method name="invert"> @@ -224,6 +224,20 @@ Reverse the order of the elements in the array (so first element will now be the last) and return reference to the array. </description> </method> + <method name="max"> + <return type="var"> + </return> + <description> + Return maximum value contained in the array if all elements are of comparable types. If the elements can't be compared, [code]null[/code] is returned. + </description> + </method> + <method name="min"> + <return type="var"> + </return> + <description> + Return minimum value contained in the array if all elements are of comparable types. If the elements can't be compared, [code]null[/code] is returned. + </description> + </method> <method name="pop_back"> <return type="var"> </return> diff --git a/doc/classes/ArrayMesh.xml b/doc/classes/ArrayMesh.xml index 1e2478dd14..453f28fe5a 100644 --- a/doc/classes/ArrayMesh.xml +++ b/doc/classes/ArrayMesh.xml @@ -66,13 +66,6 @@ Returns the name of the blend shape at this index. </description> </method> - <method name="get_surface_count" qualifiers="const"> - <return type="int"> - </return> - <description> - Return the amount of surfaces that the [code]ArrayMesh[/code] holds. - </description> - </method> <method name="lightmap_unwrap"> <return type="int" enum="Error"> </return> @@ -118,24 +111,6 @@ Return the length in vertices of the vertex array in the requested surface (see [method add_surface_from_arrays]). </description> </method> - <method name="surface_get_arrays" qualifiers="const"> - <return type="Array"> - </return> - <argument index="0" name="surf_idx" type="int"> - </argument> - <description> - Returns the arrays for the vertices, normals, uvs, etc. that make up the requested surface (see [method add_surface_from_arrays]). - </description> - </method> - <method name="surface_get_blend_shape_arrays" qualifiers="const"> - <return type="Array"> - </return> - <argument index="0" name="surf_idx" type="int"> - </argument> - <description> - Returns the blend shape arrays for the requested surface. - </description> - </method> <method name="surface_get_format" qualifiers="const"> <return type="int"> </return> @@ -145,15 +120,6 @@ Return the format mask of the requested surface (see [method add_surface_from_arrays]). </description> </method> - <method name="surface_get_material" qualifiers="const"> - <return type="Material"> - </return> - <argument index="0" name="surf_idx" type="int"> - </argument> - <description> - Return a [Material] in a given surface. Surface is rendered using this material. - </description> - </method> <method name="surface_get_name" qualifiers="const"> <return type="String"> </return> diff --git a/doc/classes/CPUParticles2D.xml b/doc/classes/CPUParticles2D.xml new file mode 100644 index 0000000000..6d115e2650 --- /dev/null +++ b/doc/classes/CPUParticles2D.xml @@ -0,0 +1,193 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="CPUParticles2D" inherits="Node2D" category="Core" version="3.1"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <demos> + </demos> + <methods> + <method name="convert_from_particles"> + <return type="void"> + </return> + <argument index="0" name="particles" type="Node"> + </argument> + <description> + </description> + </method> + <method name="restart"> + <return type="void"> + </return> + <description> + </description> + </method> + </methods> + <members> + <member name="amount" type="int" setter="set_amount" getter="get_amount"> + </member> + <member name="angle" type="float" setter="set_param" getter="get_param"> + </member> + <member name="angle_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="angle_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="angular_velocity" type="float" setter="set_param" getter="get_param"> + </member> + <member name="angular_velocity_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="angular_velocity_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="anim_loop" type="bool" setter="set_particle_flag" getter="get_particle_flag"> + </member> + <member name="anim_offset" type="float" setter="set_param" getter="get_param"> + </member> + <member name="anim_offset_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="anim_offset_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="anim_speed" type="float" setter="set_param" getter="get_param"> + </member> + <member name="anim_speed_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="anim_speed_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="color" type="Color" setter="set_color" getter="get_color"> + </member> + <member name="color_ramp" type="Gradient" setter="set_color_ramp" getter="get_color_ramp"> + </member> + <member name="damping" type="float" setter="set_param" getter="get_param"> + </member> + <member name="damping_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="damping_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="draw_order" type="int" setter="set_draw_order" getter="get_draw_order" enum="CPUParticles2D.DrawOrder"> + </member> + <member name="emission_colors" type="PoolColorArray" setter="set_emission_colors" getter="get_emission_colors"> + </member> + <member name="emission_normals" type="PoolVector2Array" setter="set_emission_normals" getter="get_emission_normals"> + </member> + <member name="emission_points" type="PoolVector2Array" setter="set_emission_points" getter="get_emission_points"> + </member> + <member name="emission_rect_extents" type="Vector2" setter="set_emission_rect_extents" getter="get_emission_rect_extents"> + </member> + <member name="emission_shape" type="int" setter="set_emission_shape" getter="get_emission_shape" enum="CPUParticles2D.EmissionShape"> + </member> + <member name="emission_sphere_radius" type="float" setter="set_emission_sphere_radius" getter="get_emission_sphere_radius"> + </member> + <member name="emitting" type="bool" setter="set_emitting" getter="is_emitting"> + </member> + <member name="explosiveness" type="float" setter="set_explosiveness_ratio" getter="get_explosiveness_ratio"> + </member> + <member name="fixed_fps" type="int" setter="set_fixed_fps" getter="get_fixed_fps"> + </member> + <member name="flag_align_y" type="bool" setter="set_particle_flag" getter="get_particle_flag"> + </member> + <member name="flatness" type="float" setter="set_flatness" getter="get_flatness"> + </member> + <member name="fract_delta" type="bool" setter="set_fractional_delta" getter="get_fractional_delta"> + </member> + <member name="gravity" type="Vector2" setter="set_gravity" getter="get_gravity"> + </member> + <member name="hue_variation" type="float" setter="set_param" getter="get_param"> + </member> + <member name="hue_variation_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="hue_variation_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="initial_velocity" type="float" setter="set_param" getter="get_param"> + </member> + <member name="initial_velocity_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="lifetime" type="float" setter="set_lifetime" getter="get_lifetime"> + </member> + <member name="linear_accel" type="float" setter="set_param" getter="get_param"> + </member> + <member name="linear_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="linear_accel_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="local_coords" type="bool" setter="set_use_local_coordinates" getter="get_use_local_coordinates"> + </member> + <member name="normalmap" type="Texture" setter="set_normalmap" getter="get_normalmap"> + </member> + <member name="one_shot" type="bool" setter="set_one_shot" getter="get_one_shot"> + </member> + <member name="preprocess" type="float" setter="set_pre_process_time" getter="get_pre_process_time"> + </member> + <member name="radial_accel" type="float" setter="set_param" getter="get_param"> + </member> + <member name="radial_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="radial_accel_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="randomness" type="float" setter="set_randomness_ratio" getter="get_randomness_ratio"> + </member> + <member name="scale" type="float" setter="set_param" getter="get_param"> + </member> + <member name="scale_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="scale_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="speed_scale" type="float" setter="set_speed_scale" getter="get_speed_scale"> + </member> + <member name="spread" type="float" setter="set_spread" getter="get_spread"> + </member> + <member name="tangential_accel" type="float" setter="set_param" getter="get_param"> + </member> + <member name="tangential_accel_curve" type="Curve" setter="set_param_curve" getter="get_param_curve"> + </member> + <member name="tangential_accel_random" type="float" setter="set_param_randomness" getter="get_param_randomness"> + </member> + <member name="texture" type="Texture" setter="set_texture" getter="get_texture"> + </member> + </members> + <constants> + <constant name="DRAW_ORDER_INDEX" value="0" enum="DrawOrder"> + </constant> + <constant name="DRAW_ORDER_LIFETIME" value="1" enum="DrawOrder"> + </constant> + <constant name="PARAM_INITIAL_LINEAR_VELOCITY" value="0" enum="Parameter"> + </constant> + <constant name="PARAM_ANGULAR_VELOCITY" value="1" enum="Parameter"> + </constant> + <constant name="PARAM_ORBIT_VELOCITY" value="2" enum="Parameter"> + </constant> + <constant name="PARAM_LINEAR_ACCEL" value="3" enum="Parameter"> + </constant> + <constant name="PARAM_RADIAL_ACCEL" value="4" enum="Parameter"> + </constant> + <constant name="PARAM_TANGENTIAL_ACCEL" value="5" enum="Parameter"> + </constant> + <constant name="PARAM_DAMPING" value="6" enum="Parameter"> + </constant> + <constant name="PARAM_ANGLE" value="7" enum="Parameter"> + </constant> + <constant name="PARAM_SCALE" value="8" enum="Parameter"> + </constant> + <constant name="PARAM_HUE_VARIATION" value="9" enum="Parameter"> + </constant> + <constant name="PARAM_ANIM_SPEED" value="10" enum="Parameter"> + </constant> + <constant name="PARAM_ANIM_OFFSET" value="11" enum="Parameter"> + </constant> + <constant name="PARAM_MAX" value="12" enum="Parameter"> + </constant> + <constant name="FLAG_ALIGN_Y_TO_VELOCITY" value="0" enum="Flags"> + </constant> + <constant name="FLAG_MAX" value="2" enum="Flags"> + </constant> + <constant name="EMISSION_SHAPE_POINT" value="0" enum="EmissionShape"> + </constant> + <constant name="EMISSION_SHAPE_CIRCLE" value="1" enum="EmissionShape"> + </constant> + <constant name="EMISSION_SHAPE_RECTANGLE" value="2" enum="EmissionShape"> + </constant> + <constant name="EMISSION_SHAPE_POINTS" value="3" enum="EmissionShape"> + </constant> + <constant name="EMISSION_SHAPE_DIRECTED_POINTS" value="4" enum="EmissionShape"> + </constant> + </constants> +</class> diff --git a/doc/classes/ClippedCamera.xml b/doc/classes/ClippedCamera.xml new file mode 100644 index 0000000000..509ddb01fc --- /dev/null +++ b/doc/classes/ClippedCamera.xml @@ -0,0 +1,87 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="ClippedCamera" inherits="Camera" category="Core" version="3.1"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <demos> + </demos> + <methods> + <method name="add_exception"> + <return type="void"> + </return> + <argument index="0" name="node" type="Object"> + </argument> + <description> + </description> + </method> + <method name="add_exception_rid"> + <return type="void"> + </return> + <argument index="0" name="rid" type="RID"> + </argument> + <description> + </description> + </method> + <method name="clear_exceptions"> + <return type="void"> + </return> + <description> + </description> + </method> + <method name="get_collision_mask_bit" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <description> + </description> + </method> + <method name="remove_exception"> + <return type="void"> + </return> + <argument index="0" name="node" type="Object"> + </argument> + <description> + </description> + </method> + <method name="remove_exception_rid"> + <return type="void"> + </return> + <argument index="0" name="rid" type="RID"> + </argument> + <description> + </description> + </method> + <method name="set_collision_mask_bit"> + <return type="void"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <argument index="1" name="value" type="bool"> + </argument> + <description> + </description> + </method> + </methods> + <members> + <member name="clip_to_areas" type="bool" setter="set_clip_to_areas" getter="is_clip_to_areas_enabled"> + </member> + <member name="clip_to_bodies" type="bool" setter="set_clip_to_bodies" getter="is_clip_to_bodies_enabled"> + </member> + <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask"> + </member> + <member name="margin" type="float" setter="set_margin" getter="get_margin"> + </member> + <member name="process_mode" type="int" setter="set_process_mode" getter="get_process_mode" enum="ClippedCamera.ProcessMode"> + </member> + </members> + <constants> + <constant name="CLIP_PROCESS_PHYSICS" value="0" enum="ProcessMode"> + </constant> + <constant name="CLIP_PROCESS_IDLE" value="1" enum="ProcessMode"> + </constant> + </constants> +</class> diff --git a/doc/classes/CollisionObject.xml b/doc/classes/CollisionObject.xml index 22b9725121..5e4e740498 100644 --- a/doc/classes/CollisionObject.xml +++ b/doc/classes/CollisionObject.xml @@ -191,9 +191,9 @@ </members> <signals> <signal name="input_event"> - <argument index="0" name="camera" type="Object"> + <argument index="0" name="camera" type="Node"> </argument> - <argument index="1" name="event" type="Object"> + <argument index="1" name="event" type="InputEvent"> </argument> <argument index="2" name="click_position" type="Vector3"> </argument> diff --git a/doc/classes/CollisionObject2D.xml b/doc/classes/CollisionObject2D.xml index 1ef72c0ca2..b507204f0d 100644 --- a/doc/classes/CollisionObject2D.xml +++ b/doc/classes/CollisionObject2D.xml @@ -204,9 +204,9 @@ </members> <signals> <signal name="input_event"> - <argument index="0" name="viewport" type="Object"> + <argument index="0" name="viewport" type="Node"> </argument> - <argument index="1" name="event" type="Object"> + <argument index="1" name="event" type="InputEvent"> </argument> <argument index="2" name="shape_idx" type="int"> </argument> diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index 8575a1f498..bbd0441a0b 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -723,7 +723,7 @@ </description> </signal> <signal name="gui_input"> - <argument index="0" name="ev" type="Object"> + <argument index="0" name="ev" type="InputEvent"> </argument> <description> Emitted when the node receives an [InputEvent]. diff --git a/doc/classes/EditorPlugin.xml b/doc/classes/EditorPlugin.xml index 62fc56e990..208780547e 100644 --- a/doc/classes/EditorPlugin.xml +++ b/doc/classes/EditorPlugin.xml @@ -445,13 +445,13 @@ </description> </signal> <signal name="resource_saved"> - <argument index="0" name="resource" type="Object"> + <argument index="0" name="resource" type="Resource"> </argument> <description> </description> </signal> <signal name="scene_changed"> - <argument index="0" name="scene_root" type="Object"> + <argument index="0" name="scene_root" type="Node"> </argument> <description> Emitted when user change scene. The argument is a root node of freshly opened scene. @@ -470,17 +470,21 @@ </constant> <constant name="CONTAINER_SPATIAL_EDITOR_MENU" value="1" enum="CustomControlContainer"> </constant> - <constant name="CONTAINER_SPATIAL_EDITOR_SIDE" value="2" enum="CustomControlContainer"> + <constant name="CONTAINER_SPATIAL_EDITOR_SIDE_LEFT" value="2" enum="CustomControlContainer"> </constant> - <constant name="CONTAINER_SPATIAL_EDITOR_BOTTOM" value="3" enum="CustomControlContainer"> + <constant name="CONTAINER_SPATIAL_EDITOR_SIDE_RIGHT" value="3" enum="CustomControlContainer"> </constant> - <constant name="CONTAINER_CANVAS_EDITOR_MENU" value="4" enum="CustomControlContainer"> + <constant name="CONTAINER_SPATIAL_EDITOR_BOTTOM" value="4" enum="CustomControlContainer"> </constant> - <constant name="CONTAINER_CANVAS_EDITOR_SIDE" value="5" enum="CustomControlContainer"> + <constant name="CONTAINER_CANVAS_EDITOR_MENU" value="5" enum="CustomControlContainer"> </constant> - <constant name="CONTAINER_CANVAS_EDITOR_BOTTOM" value="6" enum="CustomControlContainer"> + <constant name="CONTAINER_CANVAS_EDITOR_SIDE_LEFT" value="6" enum="CustomControlContainer"> </constant> - <constant name="CONTAINER_PROPERTY_EDITOR_BOTTOM" value="7" enum="CustomControlContainer"> + <constant name="CONTAINER_CANVAS_EDITOR_SIDE_RIGHT" value="7" enum="CustomControlContainer"> + </constant> + <constant name="CONTAINER_CANVAS_EDITOR_BOTTOM" value="8" enum="CustomControlContainer"> + </constant> + <constant name="CONTAINER_PROPERTY_EDITOR_BOTTOM" value="9" enum="CustomControlContainer"> </constant> <constant name="DOCK_SLOT_LEFT_UL" value="0" enum="DockSlot"> </constant> diff --git a/doc/classes/EditorProperty.xml b/doc/classes/EditorProperty.xml index 32d3a2703d..7d09554330 100644 --- a/doc/classes/EditorProperty.xml +++ b/doc/classes/EditorProperty.xml @@ -98,7 +98,7 @@ <signal name="resource_selected"> <argument index="0" name="path" type="String"> </argument> - <argument index="1" name="resource" type="Object"> + <argument index="1" name="resource" type="Resource"> </argument> <description> </description> diff --git a/doc/classes/GraphEdit.xml b/doc/classes/GraphEdit.xml index 48e3c295f1..ce0b619d67 100644 --- a/doc/classes/GraphEdit.xml +++ b/doc/classes/GraphEdit.xml @@ -247,7 +247,7 @@ </description> </signal> <signal name="node_selected"> - <argument index="0" name="node" type="Object"> + <argument index="0" name="node" type="Node"> </argument> <description> Emitted when a GraphNode is selected. diff --git a/doc/classes/Mesh.xml b/doc/classes/Mesh.xml index afb5d7db93..4852d4701d 100644 --- a/doc/classes/Mesh.xml +++ b/doc/classes/Mesh.xml @@ -48,6 +48,40 @@ Returns all the vertices that make up the faces of the mesh. Each three vertices represent one triangle. </description> </method> + <method name="get_surface_count" qualifiers="const"> + <return type="int"> + </return> + <description> + Return the amount of surfaces that the [code]Mesh[/code] holds. + </description> + </method> + <method name="surface_get_arrays" qualifiers="const"> + <return type="Array"> + </return> + <argument index="0" name="surf_idx" type="int"> + </argument> + <description> + Returns the arrays for the vertices, normals, uvs, etc. that make up the requested surface (see [method ArrayMesh.add_surface_from_arrays]). + </description> + </method> + <method name="surface_get_blend_shape_arrays" qualifiers="const"> + <return type="Array"> + </return> + <argument index="0" name="surf_idx" type="int"> + </argument> + <description> + Returns the blend shape arrays for the requested surface. + </description> + </method> + <method name="surface_get_material" qualifiers="const"> + <return type="Material"> + </return> + <argument index="0" name="surf_idx" type="int"> + </argument> + <description> + Return a [Material] in a given surface. Surface is rendered using this material. + </description> + </method> </methods> <members> <member name="lightmap_size_hint" type="Vector2" setter="set_lightmap_size_hint" getter="get_lightmap_size_hint"> @@ -124,22 +158,31 @@ <constant name="ARRAY_COMPRESS_DEFAULT" value="97280" enum="ArrayFormat"> </constant> <constant name="ARRAY_VERTEX" value="0" enum="ArrayType"> + Array of vertices. </constant> <constant name="ARRAY_NORMAL" value="1" enum="ArrayType"> + Array of normals. </constant> <constant name="ARRAY_TANGENT" value="2" enum="ArrayType"> + Array of tangents as an array of floats, 4 floats per tangent. </constant> <constant name="ARRAY_COLOR" value="3" enum="ArrayType"> + Array of colors. </constant> <constant name="ARRAY_TEX_UV" value="4" enum="ArrayType"> + Array of UV coordinates. </constant> <constant name="ARRAY_TEX_UV2" value="5" enum="ArrayType"> + Array of second set of UV coordinates. </constant> <constant name="ARRAY_BONES" value="6" enum="ArrayType"> + Array of bone data. </constant> <constant name="ARRAY_WEIGHTS" value="7" enum="ArrayType"> + Array of weights. </constant> <constant name="ARRAY_INDEX" value="8" enum="ArrayType"> + Array of indices. </constant> <constant name="ARRAY_MAX" value="9" enum="ArrayType"> </constant> diff --git a/doc/classes/OS.xml b/doc/classes/OS.xml index cf86176086..c41084f853 100644 --- a/doc/classes/OS.xml +++ b/doc/classes/OS.xml @@ -43,6 +43,12 @@ Centers the window on the screen if in windowed mode. </description> </method> + <method name="close_midi_inputs"> + <return type="void"> + </return> + <description> + </description> + </method> <method name="delay_msec" qualifiers="const"> <return type="void"> </return> @@ -593,6 +599,12 @@ Resumes native video playback. </description> </method> + <method name="open_midi_inputs"> + <return type="void"> + </return> + <description> + </description> + </method> <method name="print_all_resources"> <return type="void"> </return> diff --git a/doc/classes/Physics2DDirectSpaceState.xml b/doc/classes/Physics2DDirectSpaceState.xml index f0fee77a5a..483c71b2c0 100644 --- a/doc/classes/Physics2DDirectSpaceState.xml +++ b/doc/classes/Physics2DDirectSpaceState.xml @@ -19,7 +19,7 @@ </argument> <description> Checks how far the shape can travel toward a point. Note that both the shape and the motion are supplied through a [Physics2DShapeQueryParameters] object. The method will return an array with two floats between 0 and 1, both representing a fraction of [code]motion[/code]. The first is how far the shape can move without triggering a collision, and the second is the point at which a collision will occur. If no collision is detected, the returned array will be [1, 1]. - If the shape can not move, the array will be empty ([code]dir.empty()==true[/code]). + If the shape can not move, the array will be empty. </description> </method> <method name="collide_shape"> @@ -47,7 +47,7 @@ [code]point[/code]: The intersection point. [code]rid[/code]: The intersecting object's [RID]. [code]shape[/code]: The shape index of the colliding shape. - If the shape did not intersect anything, then an empty dictionary ([code]dir.empty()==true[/code]) is returned instead. + If the shape did not intersect anything, then an empty dictionary is returned instead. </description> </method> <method name="intersect_point"> @@ -61,6 +61,10 @@ </argument> <argument index="3" name="collision_layer" type="int" default="2147483647"> </argument> + <argument index="4" name="collide_with_bodies" type="bool" default="true"> + </argument> + <argument index="5" name="collide_with_areas" type="bool" default="false"> + </argument> <description> Checks whether a point is inside any shape. The shapes the point is inside of are returned in an array containing dictionaries with the following fields: [code]collider[/code]: The colliding object. @@ -68,7 +72,7 @@ [code]metadata[/code]: The intersecting shape's metadata. This metadata is different from [method Object.get_meta], and is set with [method Physics2DServer.shape_set_data]. [code]rid[/code]: The intersecting object's [RID]. [code]shape[/code]: The shape index of the colliding shape. - Additionally, the method can take an array of objects or [RID]s that are to be excluded from collisions, or a bitmask representing the physics layers to check in. + Additionally, the method can take an [code]exclude[/code] array of objects or [RID]s that are to be excluded from collisions, a [code]collision_mask[/code] bitmask representing the physics layers to check in, or booleans to determine if the ray should collide with [PhysicsBody]s or [Area]s, respectively. </description> </method> <method name="intersect_ray"> @@ -82,6 +86,10 @@ </argument> <argument index="3" name="collision_layer" type="int" default="2147483647"> </argument> + <argument index="4" name="collide_with_bodies" type="bool" default="true"> + </argument> + <argument index="5" name="collide_with_areas" type="bool" default="false"> + </argument> <description> Intersects a ray in a given space. The returned object is a dictionary with the following fields: [code]collider[/code]: The colliding object. @@ -91,8 +99,8 @@ [code]position[/code]: The intersection point. [code]rid[/code]: The intersecting object's [RID]. [code]shape[/code]: The shape index of the colliding shape. - If the ray did not intersect anything, then an empty dictionary ([code]dir.empty()==true[/code]) is returned instead. - Additionally, the method can take an array of objects or [RID]s that are to be excluded from collisions, or a bitmask representing the physics layers to check in. + If the ray did not intersect anything, then an empty dictionary is returned instead. + Additionally, the method can take an [code]exclude[/code] array of objects or [RID]s that are to be excluded from collisions, a [code]collision_mask[/code] bitmask representing the physics layers to check in, or booleans to determine if the ray should collide with [PhysicsBody]s or [Area]s, respectively. </description> </method> <method name="intersect_shape"> diff --git a/doc/classes/Physics2DShapeQueryParameters.xml b/doc/classes/Physics2DShapeQueryParameters.xml index 391ad6276f..f9e0c5e3de 100644 --- a/doc/classes/Physics2DShapeQueryParameters.xml +++ b/doc/classes/Physics2DShapeQueryParameters.xml @@ -22,6 +22,10 @@ </method> </methods> <members> + <member name="collide_with_areas" type="bool" setter="set_collide_with_areas" getter="is_collide_with_areas_enabled"> + </member> + <member name="collide_with_bodies" type="bool" setter="set_collide_with_bodies" getter="is_collide_with_bodies_enabled"> + </member> <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer"> The physics layer the query should be made on. </member> diff --git a/doc/classes/PhysicsDirectBodyState.xml b/doc/classes/PhysicsDirectBodyState.xml index 91fc4df4ff..2f3501ae5d 100644 --- a/doc/classes/PhysicsDirectBodyState.xml +++ b/doc/classes/PhysicsDirectBodyState.xml @@ -15,6 +15,8 @@ <argument index="0" name="force" type="Vector3"> </argument> <description> + Adds a constant directional force without affecting rotation. + This is equivalent to [code]add_force(force, Vector3(0,0,0))[/code]. </description> </method> <method name="add_force"> @@ -25,6 +27,7 @@ <argument index="1" name="position" type="Vector3"> </argument> <description> + Adds a constant force (i.e. acceleration). </description> </method> <method name="add_torque"> @@ -33,6 +36,7 @@ <argument index="0" name="torque" type="Vector3"> </argument> <description> + Adds a constant rotational force (i.e. a motor) without affecting position. </description> </method> <method name="apply_central_impulse"> @@ -41,6 +45,8 @@ <argument index="0" name="j" type="Vector3"> </argument> <description> + Applies a single directional impulse without affecting rotation. + This is equivalent to ``apply_impulse(Vector3(0,0,0), impulse)``. </description> </method> <method name="apply_impulse"> @@ -51,6 +57,7 @@ <argument index="1" name="j" type="Vector3"> </argument> <description> + Apply a positioned impulse (which will be affected by the body mass and shape). This is the equivalent of hitting a billiard ball with a cue: a force that is applied once, and only once. Both the impulse and the position are in global coordinates, and the position is relative to the object's origin. </description> </method> <method name="apply_torque_impulse"> @@ -59,6 +66,7 @@ <argument index="0" name="j" type="Vector3"> </argument> <description> + Apply a torque impulse (which will be affected by the body mass and shape). This will rotate the body around the passed in vector. </description> </method> <method name="get_contact_collider" qualifiers="const"> diff --git a/doc/classes/PhysicsDirectSpaceState.xml b/doc/classes/PhysicsDirectSpaceState.xml index 3f0e1a4f70..2f7cf5a8f3 100644 --- a/doc/classes/PhysicsDirectSpaceState.xml +++ b/doc/classes/PhysicsDirectSpaceState.xml @@ -21,7 +21,7 @@ </argument> <description> Checks whether the shape can travel to a point. The method will return an array with two floats between 0 and 1, both representing a fraction of [code]motion[/code]. The first is how far the shape can move without triggering a collision, and the second is the point at which a collision will occur. If no collision is detected, the returned array will be [1, 1]. - If the shape can not move, the array will be empty ([code]dir.empty()==true[/code]). + If the shape can not move, the array will be empty. </description> </method> <method name="collide_shape"> @@ -48,7 +48,7 @@ [code]point[/code]: The intersection point. [code]rid[/code]: The intersecting object's [RID]. [code]shape[/code]: The shape index of the colliding shape. - If the shape did not intersect anything, then an empty dictionary ([code]dir.empty()==true[/code]) is returned instead. + If the shape did not intersect anything, then an empty dictionary is returned instead. </description> </method> <method name="intersect_ray"> @@ -60,7 +60,11 @@ </argument> <argument index="2" name="exclude" type="Array" default="[ ]"> </argument> - <argument index="3" name="collision_layer" type="int" default="2147483647"> + <argument index="3" name="collision_mask" type="int" default="2147483647"> + </argument> + <argument index="4" name="collide_with_bodies" type="bool" default="true"> + </argument> + <argument index="5" name="collide_with_areas" type="bool" default="false"> </argument> <description> Intersects a ray in a given space. The returned object is a dictionary with the following fields: @@ -70,8 +74,8 @@ [code]position[/code]: The intersection point. [code]rid[/code]: The intersecting object's [RID]. [code]shape[/code]: The shape index of the colliding shape. - If the ray did not intersect anything, then an empty dictionary ([code]dir.empty()==true[/code]) is returned instead. - Additionally, the method can take an array of objects or [RID]s that are to be excluded from collisions, or a bitmask representing the physics layers to check in. + If the ray did not intersect anything, then an empty dictionary is returned instead. + Additionally, the method can take an [code]exclude[/code] array of objects or [RID]s that are to be excluded from collisions, a [code]collision_mask[/code] bitmask representing the physics layers to check in, or booleans to determine if the ray should collide with [PhysicsBody]s or [Area]s, respectively. </description> </method> <method name="intersect_shape"> diff --git a/doc/classes/PhysicsShapeQueryParameters.xml b/doc/classes/PhysicsShapeQueryParameters.xml index 2f36e81e27..7cca231ad2 100644 --- a/doc/classes/PhysicsShapeQueryParameters.xml +++ b/doc/classes/PhysicsShapeQueryParameters.xml @@ -19,6 +19,10 @@ </method> </methods> <members> + <member name="collide_with_areas" type="bool" setter="set_collide_with_areas" getter="is_collide_with_areas_enabled"> + </member> + <member name="collide_with_bodies" type="bool" setter="set_collide_with_bodies" getter="is_collide_with_bodies_enabled"> + </member> <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask"> </member> <member name="exclude" type="Array" setter="set_exclude" getter="get_exclude"> diff --git a/doc/classes/Plane.xml b/doc/classes/Plane.xml index 62e4fc5d9d..3d5eada066 100644 --- a/doc/classes/Plane.xml +++ b/doc/classes/Plane.xml @@ -157,11 +157,11 @@ </member> </members> <constants> - <constant name="X" value="Plane( 1, 0, 0, 0 )"> + <constant name="PLANE_YZ" value="Plane( 1, 0, 0, 0 )"> </constant> - <constant name="Y" value="Plane( 0, 1, 0, 0 )"> + <constant name="PLANE_XZ" value="Plane( 0, 1, 0, 0 )"> </constant> - <constant name="Z" value="Plane( 0, 0, 1, 0 )"> + <constant name="PLANE_XY" value="Plane( 0, 0, 1, 0 )"> </constant> </constants> </class> diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index 5f828550b9..ad8c5f68da 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -576,6 +576,14 @@ <member name="memory/limits/multithreaded_server/rid_pool_prealloc" type="int" setter="" getter=""> This is used by servers when used in multi threading mode (servers and visual). RIDs are preallocated to avoid stalling the server requesting them on threads. If servers get stalled too often when loading resources in a thread, increase this number. </member> + <member name="mono/debugger_agent/port" type="int" setter="" getter=""> + </member> + <member name="mono/debugger_agent/wait_for_debugger" type="bool" setter="" getter=""> + </member> + <member name="mono/debugger_agent/wait_timeout" type="int" setter="" getter=""> + </member> + <member name="mono/export/include_scripts_content" type="bool" setter="" getter=""> + </member> <member name="network/limits/debugger_stdout/max_chars_per_second" type="int" setter="" getter=""> Maximum amount of characters allowed to send as output from the debugger. Over this value, content is dropped. This helps not to stall the debugger connection. </member> @@ -656,11 +664,11 @@ </member> <member name="rendering/quality/directional_shadow/size.mobile" type="int" setter="" getter=""> </member> - <member name="rendering/quality/driver/driver_name" type="String" setter="" getter=""> - </member> <member name="rendering/quality/driver/driver_fallback" type="String" setter="" getter=""> Whether to allow falling back to other graphics drivers if the preferred driver is not available. Best means use the best working driver (this is the default). Never means never fall back to another driver even if it does not work. This means the project will not run if the preferred driver does not function. </member> + <member name="rendering/quality/driver/driver_name" type="String" setter="" getter=""> + </member> <member name="rendering/quality/filters/anisotropic_filter_level" type="int" setter="" getter=""> Maximum Anisotropic filter level used for textures when anisotropy enabled. </member> @@ -726,6 +734,8 @@ <member name="rendering/threads/thread_model" type="int" setter="" getter=""> Thread model for rendering. Rendering on a thread can vastly improve performance, but syncinc to the main thread can cause a bit more jitter. </member> + <member name="rendering/vram_compression/import_bptc" type="bool" setter="" getter=""> + </member> <member name="rendering/vram_compression/import_etc" type="bool" setter="" getter=""> If the project uses this compression (usually low end mobile), texture importer will import these. </member> diff --git a/doc/classes/RayCast.xml b/doc/classes/RayCast.xml index dce73d9c29..84c83d1282 100644 --- a/doc/classes/RayCast.xml +++ b/doc/classes/RayCast.xml @@ -6,6 +6,7 @@ <description> A RayCast represents a line from its origin to its destination position, [code]cast_to[/code]. It is used to query the 3D space in order to find the closest object along the path of the ray. RayCast can ignore some objects by adding them to the exception list via [code]add_exception[/code], by setting proper filtering with collision layers, or by filtering object types with type masks. + RayCast can be configured to report collisions with [Area]s ([member collide_with_areas]) and/or [PhysicsBody]s ([member collide_with_bodies]). Only enabled raycasts will be able to query the space and report collisions. RayCast calculates intersection every physics frame (see [Node]), and the result is cached so it can be used later until the next frame. If multiple queries are required between physics frames (or during the same frame) use [method force_raycast_update] after adjusting the raycast. </description> @@ -51,24 +52,14 @@ <return type="Object"> </return> <description> - Return the closest object the ray is pointing to. Note that this does not consider the length of the ray, so you must also use [method is_colliding] to check if the object returned is actually colliding with the ray. - Example: - [codeblock] - if RayCast.is_colliding(): - var collider = RayCast.get_collider() - [/codeblock] + Return the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> <method name="get_collider_shape" qualifiers="const"> <return type="int"> </return> <description> - Returns the collision shape of the closest object the ray is pointing to. Note that this does not consider the length of the ray, so you must also use [method is_colliding] to check if the object returned is actually colliding with the ray. - Example: - [codeblock] - if RayCast.is_colliding(): - var shape = RayCast.get_collider_shape() - [/codeblock] + Returns the shape ID of the first object that the ray intersects, or [code]0[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> <method name="get_collision_mask_bit" qualifiers="const"> @@ -98,7 +89,7 @@ <return type="bool"> </return> <description> - Return whether the closest object the ray is pointing to is colliding with the vector (considering the vector length). + Return whether any object is intersecting with the ray's vector (considering the vector length). </description> </method> <method name="remove_exception"> @@ -135,6 +126,12 @@ <member name="cast_to" type="Vector3" setter="set_cast_to" getter="get_cast_to"> The ray's destination point, relative to the RayCast's [code]position[/code]. </member> + <member name="collide_with_areas" type="bool" setter="set_collide_with_areas" getter="is_collide_with_areas_enabled"> + If [code]true[/code], collision with [Area]s will be reported. Default value: [code]false[/code]. + </member> + <member name="collide_with_bodies" type="bool" setter="set_collide_with_bodies" getter="is_collide_with_bodies_enabled"> + If [code]true[/code], collision with [PhysicsBody]s will be reported. Default value: [code]true[/code]. + </member> <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask"> The ray's collision mask. Only objects in at least one collision layer enabled in the mask will be detected. </member> diff --git a/doc/classes/RayCast2D.xml b/doc/classes/RayCast2D.xml index 79e733bcdc..e4d1ecb7f8 100644 --- a/doc/classes/RayCast2D.xml +++ b/doc/classes/RayCast2D.xml @@ -6,6 +6,7 @@ <description> A RayCast represents a line from its origin to its destination position, [code]cast_to[/code]. It is used to query the 2D space in order to find the closest object along the path of the ray. RayCast2D can ignore some objects by adding them to the exception list via [code]add_exception[/code], by setting proper filtering with collision layers, or by filtering object types with type masks. + RayCast2D can be configured to report collisions with [Area2D]s ([member collide_with_areas]) and/or [PhysicsBody2D]s ([member collide_with_bodies]). Only enabled raycasts will be able to query the space and report collisions. RayCast2D calculates intersection every physics frame (see [Node]), and the result is cached so it can be used later until the next frame. If multiple queries are required between physics frames (or during the same frame) use [method force_raycast_update] after adjusting the raycast. </description> @@ -50,24 +51,14 @@ <return type="Object"> </return> <description> - Returns the closest object the ray is pointing to. Note that this does not consider the length of the ray, so you must also use [method is_colliding] to check if the object returned is actually colliding with the ray. - Example: - [codeblock] - if RayCast2D.is_colliding(): - var collider = RayCast2D.get_collider() - [/codeblock] + Return the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> <method name="get_collider_shape" qualifiers="const"> <return type="int"> </return> <description> - Returns the collision shape of the closest object the ray is pointing to. Note that this does not consider the length of the ray, so you must also use [method is_colliding] to check if the object returned is actually colliding with the ray. - Example: - [codeblock] - if RayCast2D.is_colliding(): - var shape = RayCast2D.get_collider_shape() - [/codeblock] + Returns the shape ID of the first object that the ray intersects, or [code]0[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> <method name="get_collision_mask_bit" qualifiers="const"> @@ -97,7 +88,7 @@ <return type="bool"> </return> <description> - Return whether the closest object the ray is pointing to is colliding with the vector (considering the vector length). + Return whether any object is intersecting with the ray's vector (considering the vector length). </description> </method> <method name="remove_exception"> @@ -134,6 +125,12 @@ <member name="cast_to" type="Vector2" setter="set_cast_to" getter="get_cast_to"> The ray's destination point, relative to the RayCast's [code]position[/code]. </member> + <member name="collide_with_areas" type="bool" setter="set_collide_with_areas" getter="is_collide_with_areas_enabled"> + If [code]true[/code], collision with [Area2D]s will be reported. Default value: [code]false[/code]. + </member> + <member name="collide_with_bodies" type="bool" setter="set_collide_with_bodies" getter="is_collide_with_bodies_enabled"> + If [code]true[/code], collision with [PhysicsBody2D]s will be reported. Default value: [code]true[/code]. + </member> <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask"> The ray's collision mask. Only objects in at least one collision layer enabled in the mask will be detected. </member> diff --git a/doc/classes/RigidBody.xml b/doc/classes/RigidBody.xml index 038464e127..eea1e0321b 100644 --- a/doc/classes/RigidBody.xml +++ b/doc/classes/RigidBody.xml @@ -30,6 +30,8 @@ <argument index="0" name="force" type="Vector3"> </argument> <description> + Adds a constant directional force without affecting rotation. + This is equivalent to [code]add_force(force, Vector3(0,0,0))[/code]. </description> </method> <method name="add_force"> @@ -40,6 +42,7 @@ <argument index="1" name="position" type="Vector3"> </argument> <description> + Adds a constant force (i.e. acceleration). </description> </method> <method name="add_torque"> @@ -48,6 +51,7 @@ <argument index="0" name="torque" type="Vector3"> </argument> <description> + Adds a constant rotational force (i.e. a motor) without affecting position. </description> </method> <method name="apply_central_impulse"> @@ -56,6 +60,8 @@ <argument index="0" name="impulse" type="Vector3"> </argument> <description> + Applies a single directional impulse without affecting rotation. + This is equivalent to ``apply_impulse(Vector3(0,0,0), impulse)``. </description> </method> <method name="apply_impulse"> @@ -162,14 +168,14 @@ </members> <signals> <signal name="body_entered"> - <argument index="0" name="body" type="Object"> + <argument index="0" name="body" type="Node"> </argument> <description> Emitted when a body enters into contact with this one. Contact monitor and contacts reported must be enabled for this to work. </description> </signal> <signal name="body_exited"> - <argument index="0" name="body" type="Object"> + <argument index="0" name="body" type="Node"> </argument> <description> Emitted when a body shape exits contact with this one. Contact monitor and contacts reported must be enabled for this to work. @@ -178,7 +184,7 @@ <signal name="body_shape_entered"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Object"> + <argument index="1" name="body" type="Node"> </argument> <argument index="2" name="body_shape" type="int"> </argument> @@ -192,7 +198,7 @@ <signal name="body_shape_exited"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Object"> + <argument index="1" name="body" type="Node"> </argument> <argument index="2" name="body_shape" type="int"> </argument> diff --git a/doc/classes/RigidBody2D.xml b/doc/classes/RigidBody2D.xml index 2265c777c8..1f6b3934c2 100644 --- a/doc/classes/RigidBody2D.xml +++ b/doc/classes/RigidBody2D.xml @@ -173,14 +173,14 @@ </members> <signals> <signal name="body_entered"> - <argument index="0" name="body" type="Object"> + <argument index="0" name="body" type="Node"> </argument> <description> Emitted when a body enters into contact with this one. [member contact_monitor] must be [code]true[/code] and [member contacts_reported] greater than [code]0[/code]. </description> </signal> <signal name="body_exited"> - <argument index="0" name="body" type="Object"> + <argument index="0" name="body" type="Node"> </argument> <description> Emitted when a body exits contact with this one. [member contact_monitor] must be [code]true[/code] and [member contacts_reported] greater than [code]0[/code]. @@ -189,7 +189,7 @@ <signal name="body_shape_entered"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Object"> + <argument index="1" name="body" type="Node"> </argument> <argument index="2" name="body_shape" type="int"> </argument> @@ -202,7 +202,7 @@ <signal name="body_shape_exited"> <argument index="0" name="body_id" type="int"> </argument> - <argument index="1" name="body" type="Object"> + <argument index="1" name="body" type="Node"> </argument> <argument index="2" name="body_shape" type="int"> </argument> diff --git a/doc/classes/SceneTree.xml b/doc/classes/SceneTree.xml index c85bee9b84..11362ee680 100644 --- a/doc/classes/SceneTree.xml +++ b/doc/classes/SceneTree.xml @@ -329,21 +329,21 @@ </description> </signal> <signal name="node_added"> - <argument index="0" name="node" type="Object"> + <argument index="0" name="node" type="Node"> </argument> <description> Emitted whenever a node is added to the SceneTree. </description> </signal> <signal name="node_configuration_warning_changed"> - <argument index="0" name="node" type="Object"> + <argument index="0" name="node" type="Node"> </argument> <description> Emitted when a node's configuration changed. Only emitted in tool mode. </description> </signal> <signal name="node_removed"> - <argument index="0" name="node" type="Object"> + <argument index="0" name="node" type="Node"> </argument> <description> Emitted whenever a node is removed from the SceneTree. diff --git a/doc/classes/ScriptCreateDialog.xml b/doc/classes/ScriptCreateDialog.xml index a3ad3a778e..3de068dbcb 100644 --- a/doc/classes/ScriptCreateDialog.xml +++ b/doc/classes/ScriptCreateDialog.xml @@ -31,7 +31,7 @@ </methods> <signals> <signal name="script_created"> - <argument index="0" name="script" type="Object"> + <argument index="0" name="script" type="Script"> </argument> <description> Emitted when the user clicks the OK button. diff --git a/doc/classes/ScriptEditor.xml b/doc/classes/ScriptEditor.xml index 4bfd07fdad..435ab8aafc 100644 --- a/doc/classes/ScriptEditor.xml +++ b/doc/classes/ScriptEditor.xml @@ -70,14 +70,14 @@ </methods> <signals> <signal name="editor_script_changed"> - <argument index="0" name="script" type="Object"> + <argument index="0" name="script" type="Script"> </argument> <description> Emitted when user changed active script. Argument is a freshly activated [Script]. </description> </signal> <signal name="script_close"> - <argument index="0" name="script" type="Object"> + <argument index="0" name="script" type="Script"> </argument> <description> Emitted when editor is about to close the active script. Argument is a [Script] that is going to be closed. diff --git a/doc/classes/Shape.xml b/doc/classes/Shape.xml index 53f0e1440c..bc1a429418 100644 --- a/doc/classes/Shape.xml +++ b/doc/classes/Shape.xml @@ -13,6 +13,10 @@ </demos> <methods> </methods> + <members> + <member name="margin" type="float" setter="set_margin" getter="get_margin"> + </member> + </members> <constants> </constants> </class> diff --git a/doc/classes/SpatialMaterial.xml b/doc/classes/SpatialMaterial.xml index 4f48889531..354c6686bb 100644 --- a/doc/classes/SpatialMaterial.xml +++ b/doc/classes/SpatialMaterial.xml @@ -64,12 +64,12 @@ </member> <member name="detail_uv_layer" type="int" setter="set_detail_uv" getter="get_detail_uv" enum="SpatialMaterial.DetailUV"> </member> - <member name="distance_fade_enable" type="bool" setter="set_distance_fade" getter="is_distance_fade_enabled"> - </member> <member name="distance_fade_max_distance" type="float" setter="set_distance_fade_max_distance" getter="get_distance_fade_max_distance"> </member> <member name="distance_fade_min_distance" type="float" setter="set_distance_fade_min_distance" getter="get_distance_fade_min_distance"> </member> + <member name="distance_fade_mode" type="int" setter="set_distance_fade" getter="get_distance_fade" enum="SpatialMaterial.DistanceFadeMode"> + </member> <member name="emission" type="Color" setter="set_emission" getter="get_emission"> </member> <member name="emission_enabled" type="bool" setter="set_feature" getter="get_feature"> @@ -376,5 +376,13 @@ </constant> <constant name="EMISSION_OP_MULTIPLY" value="1" enum="EmissionOperator"> </constant> + <constant name="DISTANCE_FADE_DISABLED" value="0" enum="DistanceFadeMode"> + </constant> + <constant name="DISTANCE_FADE_PIXEL_ALPHA" value="1" enum="DistanceFadeMode"> + </constant> + <constant name="DISTANCE_FADE_PIXEL_DITHER" value="2" enum="DistanceFadeMode"> + </constant> + <constant name="DISTANCE_FADE_OBJECT_DITHER" value="3" enum="DistanceFadeMode"> + </constant> </constants> </class> diff --git a/doc/classes/Sprite.xml b/doc/classes/Sprite.xml index dd7fe010ba..52650c7300 100644 --- a/doc/classes/Sprite.xml +++ b/doc/classes/Sprite.xml @@ -18,6 +18,14 @@ Returns a Rect2 representing the Sprite's boundary relative to its local coordinates. </description> </method> + <method name="is_pixel_opaque" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="pos" type="Vector2"> + </argument> + <description> + </description> + </method> </methods> <members> <member name="centered" type="bool" setter="set_centered" getter="is_centered"> diff --git a/doc/classes/TileMap.xml b/doc/classes/TileMap.xml index 73d60e49b7..49549a9892 100644 --- a/doc/classes/TileMap.xml +++ b/doc/classes/TileMap.xml @@ -157,16 +157,6 @@ If you need these to be immediately updated, you can call [method update_dirty_quadrants]. </description> </method> - <method name="set_celld"> - <return type="void"> - </return> - <argument index="0" name="position" type="Vector2"> - </argument> - <argument index="1" name="data" type="Dictionary"> - </argument> - <description> - </description> - </method> <method name="set_cellv"> <return type="void"> </return> diff --git a/doc/classes/TileSet.xml b/doc/classes/TileSet.xml index 56bb33c5e1..a30d12d6b7 100644 --- a/doc/classes/TileSet.xml +++ b/doc/classes/TileSet.xml @@ -215,6 +215,16 @@ <description> </description> </method> + <method name="tile_get_shape_offset" qualifiers="const"> + <return type="Vector2"> + </return> + <argument index="0" name="id" type="int"> + </argument> + <argument index="1" name="shape_id" type="int"> + </argument> + <description> + </description> + </method> <method name="tile_get_shape_one_way" qualifiers="const"> <return type="bool"> </return> @@ -389,6 +399,18 @@ <description> </description> </method> + <method name="tile_set_shape_offset"> + <return type="void"> + </return> + <argument index="0" name="id" type="int"> + </argument> + <argument index="1" name="shape_id" type="int"> + </argument> + <argument index="2" name="shape_offset" type="Vector2"> + </argument> + <description> + </description> + </method> <method name="tile_set_shape_one_way"> <return type="void"> </return> diff --git a/doc/classes/Tree.xml b/doc/classes/Tree.xml index 533df57564..5c24df5be2 100644 --- a/doc/classes/Tree.xml +++ b/doc/classes/Tree.xml @@ -244,7 +244,7 @@ </members> <signals> <signal name="button_pressed"> - <argument index="0" name="item" type="Object"> + <argument index="0" name="item" type="TreeItem"> </argument> <argument index="1" name="column" type="int"> </argument> @@ -286,7 +286,7 @@ </description> </signal> <signal name="item_collapsed"> - <argument index="0" name="item" type="Object"> + <argument index="0" name="item" type="TreeItem"> </argument> <description> Emitted when an item is collapsed by a click on the folding arrow. @@ -324,7 +324,7 @@ </description> </signal> <signal name="multi_selected"> - <argument index="0" name="item" type="Object"> + <argument index="0" name="item" type="TreeItem"> </argument> <argument index="1" name="column" type="int"> </argument> diff --git a/doc/classes/UndoRedo.xml b/doc/classes/UndoRedo.xml index 0ea5c6e005..0ea5c6e005 100755..100644 --- a/doc/classes/UndoRedo.xml +++ b/doc/classes/UndoRedo.xml diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index 05649193a6..2f5710da51 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -104,6 +104,12 @@ Returns [code]true[/code] if there are visible modals on-screen. </description> </method> + <method name="gui_is_dragging" qualifiers="const"> + <return type="bool"> + </return> + <description> + </description> + </method> <method name="input"> <return type="void"> </return> diff --git a/doc/classes/VisibilityNotifier.xml b/doc/classes/VisibilityNotifier.xml index 2f22dc99bf..95da708420 100644 --- a/doc/classes/VisibilityNotifier.xml +++ b/doc/classes/VisibilityNotifier.xml @@ -26,14 +26,14 @@ </members> <signals> <signal name="camera_entered"> - <argument index="0" name="camera" type="Object"> + <argument index="0" name="camera" type="Camera"> </argument> <description> Emitted when the VisibilityNotifier enters a [Camera]'s view. </description> </signal> <signal name="camera_exited"> - <argument index="0" name="camera" type="Object"> + <argument index="0" name="camera" type="Camera"> </argument> <description> Emitted when the VisibilityNotifier exits a [Camera]'s view. diff --git a/doc/classes/VisibilityNotifier2D.xml b/doc/classes/VisibilityNotifier2D.xml index b98f2794d2..aaaa9b63bb 100644 --- a/doc/classes/VisibilityNotifier2D.xml +++ b/doc/classes/VisibilityNotifier2D.xml @@ -36,14 +36,14 @@ </description> </signal> <signal name="viewport_entered"> - <argument index="0" name="viewport" type="Object"> + <argument index="0" name="viewport" type="Viewport"> </argument> <description> Emitted when the VisibilityNotifier2D enters a [Viewport]'s view. </description> </signal> <signal name="viewport_exited"> - <argument index="0" name="viewport" type="Object"> + <argument index="0" name="viewport" type="Viewport"> </argument> <description> Emitted when the VisibilityNotifier2D exits a [Viewport]'s view. |