summaryrefslogtreecommitdiff
path: root/doc/classes
diff options
context:
space:
mode:
Diffstat (limited to 'doc/classes')
-rw-r--r--doc/classes/CharacterBody2D.xml49
-rw-r--r--doc/classes/CharacterBody3D.xml21
-rw-r--r--doc/classes/Dictionary.xml11
-rw-r--r--doc/classes/KinematicCollision2D.xml3
-rw-r--r--doc/classes/KinematicCollision3D.xml10
-rw-r--r--doc/classes/PhysicsDirectBodyState2D.xml7
-rw-r--r--doc/classes/PhysicsDirectSpaceState2D.xml5
-rw-r--r--doc/classes/PhysicsServer2D.xml17
8 files changed, 59 insertions, 64 deletions
diff --git a/doc/classes/CharacterBody2D.xml b/doc/classes/CharacterBody2D.xml
index 35702070be..e14c2dc110 100644
--- a/doc/classes/CharacterBody2D.xml
+++ b/doc/classes/CharacterBody2D.xml
@@ -28,6 +28,12 @@
Returns the surface normal of the floor at the last collision point. Only valid after calling [method move_and_slide] and when [method is_on_floor] returns [code]true[/code].
</description>
</method>
+ <method name="get_last_motion" qualifiers="const">
+ <return type="Vector2" />
+ <description>
+ Returns the last motion applied to the [CharacterBody2D] during the last call to [method move_and_slide]. The movement can be split into multiple motions when sliding occurs, and this method return the last one, which is useful to retrieve the current direction of the movement.
+ </description>
+ </method>
<method name="get_last_slide_collision">
<return type="KinematicCollision2D" />
<description>
@@ -40,6 +46,18 @@
Returns the linear velocity of the platform at the last collision point. Only valid after calling [method move_and_slide].
</description>
</method>
+ <method name="get_position_delta" qualifiers="const">
+ <return type="Vector2" />
+ <description>
+ Returns the travel (position delta) that occurred during the last call to [method move_and_slide].
+ </description>
+ </method>
+ <method name="get_real_velocity" qualifiers="const">
+ <return type="Vector2" />
+ <description>
+ Returns the current real velocity since the last call to [method move_and_slide]. For example, when you climb a slope, you will move diagonally even though the velocity is horizontal. This method returns the diagonal movement, as opposed to [member motion_velocity] which returns the requested velocity.
+ </description>
+ </method>
<method name="get_slide_collision">
<return type="KinematicCollision2D" />
<argument index="0" name="slide_idx" type="int" />
@@ -68,6 +86,12 @@
Returns the number of times the body collided and changed direction during the last call to [method move_and_slide].
</description>
</method>
+ <method name="get_wall_normal" qualifiers="const">
+ <return type="Vector2" />
+ <description>
+ Returns the surface normal of the wall at the last collision point. Only valid after calling [method move_and_slide] and when [method is_on_wall] returns [code]true[/code].
+ </description>
+ </method>
<method name="is_on_ceiling" qualifiers="const">
<return type="bool" />
<description>
@@ -107,9 +131,9 @@
<method name="move_and_slide">
<return type="bool" />
<description>
- Moves the body based on [member linear_velocity]. If the body collides with another, it will slide along the other body (by default only on floor) rather than stop immediately. If the other body is a [CharacterBody2D] or [RigidDynamicBody2D], it will also be affected by the motion of the other body. You can use this to make moving and rotating platforms, or to make nodes push other nodes.
+ Moves the body based on [member motion_velocity]. If the body collides with another, it will slide along the other body (by default only on floor) rather than stop immediately. If the other body is a [CharacterBody2D] or [RigidDynamicBody2D], it will also be affected by the motion of the other body. You can use this to make moving and rotating platforms, or to make nodes push other nodes.
This method should be used in [method Node._physics_process] (or in a method called by [method Node._physics_process]), as it uses the physics step's [code]delta[/code] value automatically in calculations. Otherwise, the simulation will run at an incorrect speed.
- Modifies [member linear_velocity] if a slide collision occurred. To get the latest collision call [method get_last_slide_collision], for detailed information about collisions that occurred, use [method get_slide_collision].
+ Modifies [member motion_velocity] if a slide collision occurred. To get the latest collision call [method get_last_slide_collision], for detailed information about collisions that occurred, use [method get_slide_collision].
When the body touches a moving platform, the platform's velocity is automatically added to the body motion. If a collision occurs due to the platform's motion, it will always be first in the slide collisions.
The general behaviour and available properties change according to the [member motion_mode].
Returns [code]true[/code] if the body collided, otherwise, returns [code]false[/code].
@@ -138,20 +162,24 @@
As long as the snapping vector is in contact with the ground and the body moves against `up_direction`, the body will remain attached to the surface. Snapping is not applied if the body moves along `up_direction`, so it will be able to detach from the ground when jumping.
</member>
<member name="floor_stop_on_slope" type="bool" setter="set_floor_stop_on_slope_enabled" getter="is_floor_stop_on_slope_enabled" default="true">
- If [code]true[/code], the body will not slide on floor's slopes when you include gravity in [code]linear_velocity[/code] when calling [method move_and_slide] and the body is standing still.
+ If [code]true[/code], the body will not slide on slopes when calling [method move_and_slide] when the body is standing still.
+ If [code]false[/code], the body will slide on floor's slopes when [member motion_velocity] applies a downward force.
</member>
<member name="free_mode_min_slide_angle" type="float" setter="set_free_mode_min_slide_angle" getter="get_free_mode_min_slide_angle" default="0.261799">
Minimum angle (in radians) where the body is allowed to slide when it encounters a slope. The default value equals 15 degrees.
</member>
- <member name="linear_velocity" type="Vector2" setter="set_linear_velocity" getter="get_linear_velocity" default="Vector2(0, 0)">
- Current velocity vector in pixels per second, used and modified during calls to [method move_and_slide].
- </member>
<member name="max_slides" type="int" setter="set_max_slides" getter="get_max_slides" default="4">
Maximum number of times the body can change direction before it stops when calling [method move_and_slide].
</member>
<member name="motion_mode" type="int" setter="set_motion_mode" getter="get_motion_mode" enum="CharacterBody2D.MotionMode" default="0">
Sets the motion mode which defines the behaviour of [method move_and_slide]. See [enum MotionMode] constants for available modes.
</member>
+ <member name="motion_velocity" type="Vector2" setter="set_motion_velocity" getter="get_motion_velocity" default="Vector2(0, 0)">
+ Current velocity vector in pixels per second, used and modified during calls to [method move_and_slide].
+ </member>
+ <member name="moving_platform_apply_velocity_on_leave" type="int" setter="set_moving_platform_apply_velocity_on_leave" getter="get_moving_platform_apply_velocity_on_leave" enum="CharacterBody2D.MovingPlatformApplyVelocityOnLeave" default="0">
+ Sets the behaviour to apply when you leave a moving platform. By default, to be physically accurate, when you leave the last platform velocity is applied. See [enum MovingPlatformApplyVelocityOnLeave] constants for available behaviour.
+ </member>
<member name="moving_platform_floor_layers" type="int" setter="set_moving_platform_floor_layers" getter="get_moving_platform_floor_layers" default="4294967295">
Collision layers that will be included for detecting floor bodies that will act as moving platforms to be followed by the [CharacterBody2D]. By default, all floor bodies are detected and propagate their velocity.
</member>
@@ -172,5 +200,14 @@
<constant name="MOTION_MODE_FREE" value="1" enum="MotionMode">
Apply when there is no notion of floor or ceiling. All collisions will be reported as [code]on_wall[/code]. In this mode, when you slide, the speed will always be constant. This mode is suitable for top-down games.
</constant>
+ <constant name="PLATFORM_VEL_ON_LEAVE_ALWAYS" value="0" enum="MovingPlatformApplyVelocityOnLeave">
+ Add the last platform velocity to the [member motion_velocity] when you leave a moving platform.
+ </constant>
+ <constant name="PLATFORM_VEL_ON_LEAVE_UPWARD_ONLY" value="1" enum="MovingPlatformApplyVelocityOnLeave">
+ Add the last platform velocity to the [member motion_velocity] when you leave a moving platform, but any downward motion is ignored. It's useful to keep full jump height even when the platform is moving down.
+ </constant>
+ <constant name="PLATFORM_VEL_ON_LEAVE_NEVER" value="2" enum="MovingPlatformApplyVelocityOnLeave">
+ Do nothing when leaving a platform.
+ </constant>
</constants>
</class>
diff --git a/doc/classes/CharacterBody3D.xml b/doc/classes/CharacterBody3D.xml
index 66d9940b60..24b26fb16e 100644
--- a/doc/classes/CharacterBody3D.xml
+++ b/doc/classes/CharacterBody3D.xml
@@ -32,7 +32,7 @@
<method name="get_last_motion" qualifiers="const">
<return type="Vector3" />
<description>
- Returns the last motion applied to the [CharacterBody3D] during the last call to [method move_and_slide]. The movement can be split if needed into multiple motion, this method return the last one, it's useful to retrieve the current direction of the movement.
+ Returns the last motion applied to the [CharacterBody3D] during the last call to [method move_and_slide]. The movement can be split into multiple motions when sliding occurs, and this method return the last one, which is useful to retrieve the current direction of the movement.
</description>
</method>
<method name="get_last_slide_collision">
@@ -56,7 +56,7 @@
<method name="get_real_velocity" qualifiers="const">
<return type="Vector3" />
<description>
- Returns the current real velocity since the last call to [method move_and_slide]. For example, when you climb a slope, you will move diagonally even though the velocity is horizontal. This method returns the diagonal movement, as opposed to [member linear_velocity] which returns the requested velocity.
+ Returns the current real velocity since the last call to [method move_and_slide]. For example, when you climb a slope, you will move diagonally even though the velocity is horizontal. This method returns the diagonal movement, as opposed to [member motion_velocity] which returns the requested velocity.
</description>
</method>
<method name="get_slide_collision">
@@ -117,9 +117,9 @@
<method name="move_and_slide">
<return type="bool" />
<description>
- Moves the body based on [member linear_velocity]. If the body collides with another, it will slide along the other body rather than stop immediately. If the other body is a [CharacterBody3D] or [RigidDynamicBody3D], it will also be affected by the motion of the other body. You can use this to make moving and rotating platforms, or to make nodes push other nodes.
+ Moves the body based on [member motion_velocity]. If the body collides with another, it will slide along the other body rather than stop immediately. If the other body is a [CharacterBody3D] or [RigidDynamicBody3D], it will also be affected by the motion of the other body. You can use this to make moving and rotating platforms, or to make nodes push other nodes.
This method should be used in [method Node._physics_process] (or in a method called by [method Node._physics_process]), as it uses the physics step's [code]delta[/code] value automatically in calculations. Otherwise, the simulation will run at an incorrect speed.
- Modifies [member linear_velocity] if a slide collision occurred. To get the latest collision call [method get_last_slide_collision], for more detailed information about collisions that occurred, use [method get_slide_collision].
+ Modifies [member motion_velocity] if a slide collision occurred. To get the latest collision call [method get_last_slide_collision], for more detailed information about collisions that occurred, use [method get_slide_collision].
When the body touches a moving platform, the platform's velocity is automatically added to the body motion. If a collision occurs due to the platform's motion, it will always be first in the slide collisions.
Returns [code]true[/code] if the body collided, otherwise, returns [code]false[/code].
</description>
@@ -147,10 +147,8 @@
As long as the snapping vector is in contact with the ground and the body moves against `up_direction`, the body will remain attached to the surface. Snapping is not applied if the body moves along `up_direction`, so it will be able to detach from the ground when jumping.
</member>
<member name="floor_stop_on_slope" type="bool" setter="set_floor_stop_on_slope_enabled" getter="is_floor_stop_on_slope_enabled" default="true">
- If [code]true[/code], the body will not slide on slopes when you include gravity in [code]linear_velocity[/code] when calling [method move_and_slide] and the body is standing still.
- </member>
- <member name="linear_velocity" type="Vector3" setter="set_linear_velocity" getter="get_linear_velocity" default="Vector3(0, 0, 0)">
- Current velocity vector (typically meters per second), used and modified during calls to [method move_and_slide].
+ If [code]true[/code], the body will not slide on slopes when calling [method move_and_slide] when the body is standing still.
+ If [code]false[/code], the body will slide on floor's slopes when [member motion_velocity] applies a downward force.
</member>
<member name="max_slides" type="int" setter="set_max_slides" getter="get_max_slides" default="6">
Maximum number of times the body can change direction before it stops when calling [method move_and_slide].
@@ -158,6 +156,9 @@
<member name="motion_mode" type="int" setter="set_motion_mode" getter="get_motion_mode" enum="CharacterBody3D.MotionMode" default="0">
Sets the motion mode which defines the behaviour of [method move_and_slide]. See [enum MotionMode] constants for available modes.
</member>
+ <member name="motion_velocity" type="Vector3" setter="set_motion_velocity" getter="get_motion_velocity" default="Vector3(0, 0, 0)">
+ Current velocity vector (typically meters per second), used and modified during calls to [method move_and_slide].
+ </member>
<member name="moving_platform_apply_velocity_on_leave" type="int" setter="set_moving_platform_apply_velocity_on_leave" getter="get_moving_platform_apply_velocity_on_leave" enum="CharacterBody3D.MovingPlatformApplyVelocityOnLeave" default="0">
Sets the behaviour to apply when you leave a moving platform. By default, to be physically accurate, when you leave the last platform velocity is applied. See [enum MovingPlatformApplyVelocityOnLeave] constants for available behaviour.
</member>
@@ -185,10 +186,10 @@
Apply when there is no notion of floor or ceiling. All collisions will be reported as [code]on_wall[/code]. In this mode, when you slide, the speed will always be constant. This mode is suitable for games without ground like space games.
</constant>
<constant name="PLATFORM_VEL_ON_LEAVE_ALWAYS" value="0" enum="MovingPlatformApplyVelocityOnLeave">
- Add the last platform velocity to the [member linear_velocity] when you leave a moving platform.
+ Add the last platform velocity to the [member motion_velocity] when you leave a moving platform.
</constant>
<constant name="PLATFORM_VEL_ON_LEAVE_UPWARD_ONLY" value="1" enum="MovingPlatformApplyVelocityOnLeave">
- Add the last platform velocity to the [member linear_velocity] when you leave a moving platform, but any downward motion is ignored. It's useful to keep full jump height even when the platform is moving down.
+ Add the last platform velocity to the [member motion_velocity] when you leave a moving platform, but any downward motion is ignored. It's useful to keep full jump height even when the platform is moving down.
</constant>
<constant name="PLATFORM_VEL_ON_LEAVE_NEVER" value="2" enum="MovingPlatformApplyVelocityOnLeave">
Do nothing when leaving a platform.
diff --git a/doc/classes/Dictionary.xml b/doc/classes/Dictionary.xml
index 2eb75d48a3..adc1eab393 100644
--- a/doc/classes/Dictionary.xml
+++ b/doc/classes/Dictionary.xml
@@ -40,7 +40,7 @@
};
[/csharp]
[/codeblocks]
- You can access a dictionary's values by referencing the appropriate key. In the above example, [code]points_dir["White"][/code] will return [code]50[/code]. You can also write [code]points_dir.White[/code], which is equivalent. However, you'll have to use the bracket syntax if the key you're accessing the dictionary with isn't a fixed string (such as a number or variable).
+ You can access a dictionary's values by referencing the appropriate key. In the above example, [code]points_dict["White"][/code] will return [code]50[/code]. You can also write [code]points_dict.White[/code], which is equivalent. However, you'll have to use the bracket syntax if the key you're accessing the dictionary with isn't a fixed string (such as a number or variable).
[codeblocks]
[gdscript]
export(string, "White", "Yellow", "Orange") var my_color
@@ -72,7 +72,7 @@
my_dict = {"First Array": [1, 2, 3, 4]} # Assigns an Array to a String key.
[/gdscript]
[csharp]
- var myDir = new Godot.Collections.Dictionary
+ var myDict = new Godot.Collections.Dictionary
{
{"First Array", new Godot.Collections.Array{1, 2, 3, 4}}
};
@@ -85,7 +85,7 @@
points_dict["Blue"] = 150 # Add "Blue" as a key and assign 150 as its value.
[/gdscript]
[csharp]
- var pointsDir = new Godot.Collections.Dictionary
+ var pointsDict = new Godot.Collections.Dictionary
{
{"White", 50},
{"Yellow", 75},
@@ -98,7 +98,7 @@
[codeblocks]
[gdscript]
# This is a valid dictionary.
- # To access the string "Nested value" below, use `my_dir.sub_dir.sub_key` or `my_dir["sub_dir"]["sub_key"]`.
+ # To access the string "Nested value" below, use `my_dict.sub_dict.sub_key` or `my_dict["sub_dict"]["sub_key"]`.
# Indexing styles can be mixed and matched depending on your needs.
var my_dict = {
"String Key": 5,
@@ -109,8 +109,7 @@
[/gdscript]
[csharp]
// This is a valid dictionary.
- // To access the string "Nested value" below, use `my_dir.sub_dir.sub_key` or `my_dir["sub_dir"]["sub_key"]`.
- // Indexing styles can be mixed and matched depending on your needs.
+ // To access the string "Nested value" below, use `((Godot.Collections.Dictionary)myDict["sub_dict"])["sub_key"]`.
var myDict = new Godot.Collections.Dictionary {
{"String Key", 5},
{4, new Godot.Collections.Array{1,2,3}},
diff --git a/doc/classes/KinematicCollision2D.xml b/doc/classes/KinematicCollision2D.xml
index c558c541ad..29fc4700fd 100644
--- a/doc/classes/KinematicCollision2D.xml
+++ b/doc/classes/KinematicCollision2D.xml
@@ -25,9 +25,6 @@
<member name="collider_id" type="int" setter="" getter="get_collider_id" default="0">
The colliding body's unique instance ID. See [method Object.get_instance_id].
</member>
- <member name="collider_metadata" type="Variant" setter="" getter="get_collider_metadata">
- The colliding body's metadata. See [Object].
- </member>
<member name="collider_rid" type="RID" setter="" getter="get_collider_rid">
The colliding body's [RID] used by the [PhysicsServer2D].
</member>
diff --git a/doc/classes/KinematicCollision3D.xml b/doc/classes/KinematicCollision3D.xml
index db32cf57bc..3db6fe019b 100644
--- a/doc/classes/KinematicCollision3D.xml
+++ b/doc/classes/KinematicCollision3D.xml
@@ -32,13 +32,6 @@
Returns the collider ID by index (the latest by default).
</description>
</method>
- <method name="get_collider_metadata" qualifiers="const">
- <return type="Variant" />
- <argument index="0" name="collision_index" type="int" default="0" />
- <description>
- Returns the collider metadata by index (the latest by default).
- </description>
- </method>
<method name="get_collider_rid" qualifiers="const">
<return type="RID" />
<argument index="0" name="collision_index" type="int" default="0" />
@@ -96,9 +89,6 @@
<member name="collider_id" type="int" setter="" getter="get_best_collider_id" default="0">
The colliding body's unique instance ID. See [method Object.get_instance_id].
</member>
- <member name="collider_metadata" type="Variant" setter="" getter="get_best_collider_metadata">
- The colliding body's metadata. See [Object].
- </member>
<member name="collider_rid" type="RID" setter="" getter="get_best_collider_rid">
The colliding body's [RID] used by the [PhysicsServer3D].
</member>
diff --git a/doc/classes/PhysicsDirectBodyState2D.xml b/doc/classes/PhysicsDirectBodyState2D.xml
index bbb708c9b4..aa189f17f4 100644
--- a/doc/classes/PhysicsDirectBodyState2D.xml
+++ b/doc/classes/PhysicsDirectBodyState2D.xml
@@ -90,13 +90,6 @@
Returns the collider's shape index.
</description>
</method>
- <method name="get_contact_collider_shape_metadata" qualifiers="const">
- <return type="Variant" />
- <argument index="0" name="contact_idx" type="int" />
- <description>
- Returns the collided shape's metadata. This metadata is different from [method Object.get_meta], and is set with [method PhysicsServer2D.shape_set_data].
- </description>
- </method>
<method name="get_contact_collider_velocity_at_position" qualifiers="const">
<return type="Vector2" />
<argument index="0" name="contact_idx" type="int" />
diff --git a/doc/classes/PhysicsDirectSpaceState2D.xml b/doc/classes/PhysicsDirectSpaceState2D.xml
index 0264249dab..9aa00022cd 100644
--- a/doc/classes/PhysicsDirectSpaceState2D.xml
+++ b/doc/classes/PhysicsDirectSpaceState2D.xml
@@ -36,7 +36,6 @@
[b]Note:[/b] This method does not take into account the [code]motion[/code] property of the object. The returned object is a dictionary containing the following fields:
[code]collider_id[/code]: The colliding object's ID.
[code]linear_velocity[/code]: The colliding object's velocity [Vector2]. If the object is an [Area2D], the result is [code](0, 0)[/code].
- [code]metadata[/code]: The intersecting shape's metadata. This metadata is different from [method Object.get_meta], and is set with [method PhysicsServer2D.shape_set_data].
[code]normal[/code]: The object's surface normal at the intersection point.
[code]point[/code]: The intersection point.
[code]rid[/code]: The intersecting object's [RID].
@@ -55,7 +54,6 @@
Checks whether a point is inside any solid shape. The shapes the point is inside of are returned in an array containing dictionaries with the following fields:
[code]collider[/code]: The colliding object.
[code]collider_id[/code]: The colliding object's ID.
- [code]metadata[/code]: The intersecting shape's metadata. This metadata is different from [method Object.get_meta], and is set with [method PhysicsServer2D.shape_set_data].
[code]rid[/code]: The intersecting object's [RID].
[code]shape[/code]: The shape index of the colliding shape.
Additionally, the method can take an [code]exclude[/code] array of objects or [RID]s that are to be excluded from collisions, a [code]collision_mask[/code] bitmask representing the physics layers to detect (all layers by default), or booleans to determine if the ray should collide with [PhysicsBody2D]s or [Area2D]s, respectively.
@@ -75,7 +73,6 @@
Checks whether a point is inside any solid shape, in a specific canvas layer given by [code]canvas_instance_id[/code]. The shapes the point is inside of are returned in an array containing dictionaries with the following fields:
[code]collider[/code]: The colliding object.
[code]collider_id[/code]: The colliding object's ID.
- [code]metadata[/code]: The intersecting shape's metadata. This metadata is different from [method Object.get_meta], and is set with [method PhysicsServer2D.shape_set_data].
[code]rid[/code]: The intersecting object's [RID].
[code]shape[/code]: The shape index of the colliding shape.
Additionally, the method can take an [code]exclude[/code] array of objects or [RID]s that are to be excluded from collisions, a [code]collision_mask[/code] bitmask representing the physics layers to detect (all layers by default), or booleans to determine if the ray should collide with [PhysicsBody2D]s or [Area2D]s, respectively.
@@ -94,7 +91,6 @@
Intersects a ray in a given space. The returned object is a dictionary with the following fields:
[code]collider[/code]: The colliding object.
[code]collider_id[/code]: The colliding object's ID.
- [code]metadata[/code]: The intersecting shape's metadata. This metadata is different from [method Object.get_meta], and is set with [method PhysicsServer2D.shape_set_data].
[code]normal[/code]: The object's surface normal at the intersection point.
[code]position[/code]: The intersection point.
[code]rid[/code]: The intersecting object's [RID].
@@ -112,7 +108,6 @@
[b]Note:[/b] This method does not take into account the [code]motion[/code] property of the object. The intersected shapes are returned in an array containing dictionaries with the following fields:
[code]collider[/code]: The colliding object.
[code]collider_id[/code]: The colliding object's ID.
- [code]metadata[/code]: The intersecting shape's metadata. This metadata is different from [method Object.get_meta], and is set with [method PhysicsServer2D.shape_set_data].
[code]rid[/code]: The intersecting object's [RID].
[code]shape[/code]: The shape index of the colliding shape.
The number of intersections can be limited with the [code]max_results[/code] parameter, to reduce the processing time.
diff --git a/doc/classes/PhysicsServer2D.xml b/doc/classes/PhysicsServer2D.xml
index 791a04e4c2..b5b6a7ea58 100644
--- a/doc/classes/PhysicsServer2D.xml
+++ b/doc/classes/PhysicsServer2D.xml
@@ -395,14 +395,6 @@
Returns the number of shapes assigned to a body.
</description>
</method>
- <method name="body_get_shape_metadata" qualifiers="const">
- <return type="Variant" />
- <argument index="0" name="body" type="RID" />
- <argument index="1" name="shape_idx" type="int" />
- <description>
- Returns the metadata of a shape of a body.
- </description>
- </method>
<method name="body_get_shape_transform" qualifiers="const">
<return type="Transform2D" />
<argument index="0" name="body" type="RID" />
@@ -562,15 +554,6 @@
Disables shape in body if [code]disable[/code] is [code]true[/code].
</description>
</method>
- <method name="body_set_shape_metadata">
- <return type="void" />
- <argument index="0" name="body" type="RID" />
- <argument index="1" name="shape_idx" type="int" />
- <argument index="2" name="metadata" type="Variant" />
- <description>
- Sets metadata of a shape within a body. This metadata is different from [method Object.set_meta], and can be retrieved on shape queries.
- </description>
- </method>
<method name="body_set_shape_transform">
<return type="void" />
<argument index="0" name="body" type="RID" />
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-04 09:46:56 +0000