diff options
Diffstat (limited to 'doc/classes')
30 files changed, 472 insertions, 266 deletions
diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index 25f8f22d44..95108f1613 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -804,10 +804,7 @@ <method name="randomize"> <description> Randomizes the seed (or the internal state) of the random number generator. Current implementation reseeds using a number based on time. - [codeblock] - func _ready(): - randomize() - [/codeblock] + [b]Note:[/b] This method is called automatically when the project is run. If you need to fix the seed to have reproducible results, use [method seed] to initialize the random number generator. </description> </method> <method name="range_lerp"> diff --git a/doc/classes/AStar.xml b/doc/classes/AStar.xml index e975b8ed28..fce2b90197 100644 --- a/doc/classes/AStar.xml +++ b/doc/classes/AStar.xml @@ -289,6 +289,7 @@ </argument> <description> Returns an array with the points that are in the path found by AStar between the given points. The array is ordered from the starting point to the ending point of the path. + [b]Note:[/b] This method is not thread-safe. If called from a [Thread], it will return an empty [PackedVector3Array] and will print an error message. </description> </method> <method name="get_point_position" qualifiers="const"> diff --git a/doc/classes/AStar2D.xml b/doc/classes/AStar2D.xml index 2a51678209..3efd2f604c 100644 --- a/doc/classes/AStar2D.xml +++ b/doc/classes/AStar2D.xml @@ -258,6 +258,7 @@ </argument> <description> Returns an array with the points that are in the path found by AStar2D between the given points. The array is ordered from the starting point to the ending point of the path. + [b]Note:[/b] This method is not thread-safe. If called from a [Thread], it will return an empty [PackedVector2Array] and will print an error message. </description> </method> <method name="get_point_position" qualifiers="const"> diff --git a/doc/classes/AnimationNodeTimeSeek.xml b/doc/classes/AnimationNodeTimeSeek.xml index eb5335c792..171d65fbe0 100644 --- a/doc/classes/AnimationNodeTimeSeek.xml +++ b/doc/classes/AnimationNodeTimeSeek.xml @@ -4,7 +4,27 @@ A time-seeking animation node to be used with [AnimationTree]. </brief_description> <description> - This node can be used to cause a seek command to happen to any sub-children of the graph. After setting the time, this value returns to -1. + This node can be used to cause a seek command to happen to any sub-children of the animation graph. Use this node type to play an [Animation] from the start or a certain playback position inside the [AnimationNodeBlendTree]. After setting the time and changing the animation playback, the seek node automatically goes into sleep mode on the next process frame by setting its [code]seek_position[/code] value to [code]-1.0[/code]. + [codeblocks] + [gdscript] + # Play child animation from the start. + animation_tree.set("parameters/Seek/seek_position", 0.0) + # Alternative syntax (same result as above). + animation_tree["parameters/Seek/seek_position"] = 0.0 + + # Play child animation from 12 second timestamp. + animation_tree.set("parameters/Seek/seek_position", 12.0) + # Alternative syntax (same result as above). + animation_tree["parameters/Seek/seek_position"] = 12.0 + [/gdscript] + [csharp] + // Play child animation from the start. + animationTree.Set("parameters/Seek/seek_position", 0.0); + + // Play child animation from 12 second timestamp. + animationTree.Set("parameters/Seek/seek_position", 12.0); + [/csharp] + [/codeblocks] </description> <tutorials> <link title="AnimationTree">https://docs.godotengine.org/en/latest/tutorials/animation/animation_tree.html</link> diff --git a/doc/classes/Area2D.xml b/doc/classes/Area2D.xml index 9711a2a35b..a1e522d146 100644 --- a/doc/classes/Area2D.xml +++ b/doc/classes/Area2D.xml @@ -1,10 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="Area2D" inherits="CollisionObject2D" version="4.0"> <brief_description> - 2D area for detection and 2D physics influence. + 2D area for detection and physics and audio influence. </brief_description> <description> - 2D area that detects [CollisionObject2D] nodes overlapping, entering, or exiting. Can also alter or override local physics parameters (gravity, damping). + 2D area that detects [CollisionObject2D] nodes overlapping, entering, or exiting. Can also alter or override local physics parameters (gravity, damping) and route audio to a custom audio bus. </description> <tutorials> <link title="Using Area2D">https://docs.godotengine.org/en/latest/tutorials/physics/using_area_2d.html</link> @@ -13,24 +13,6 @@ <link title="2D Platformer Demo">https://godotengine.org/asset-library/asset/120</link> </tutorials> <methods> - <method name="get_collision_layer_bit" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <description> - Returns an individual bit on the layer mask. Describes whether other areas will collide with this one on the given layer. - </description> - </method> - <method name="get_collision_mask_bit" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <description> - Returns an individual bit on the collision mask. Describes whether this area will collide with others on the given layer. - </description> - </method> <method name="get_overlapping_areas" qualifiers="const"> <return type="Area2D[]"> </return> @@ -66,28 +48,6 @@ The [code]body[/code] argument can either be a [PhysicsBody2D] or a [TileMap] instance (while TileMaps are not physics body themselves, they register their tiles with collision shapes as a virtual physics body). </description> </method> - <method name="set_collision_layer_bit"> - <return type="void"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <argument index="1" name="value" type="bool"> - </argument> - <description> - Set/clear individual bits on the layer mask. This makes getting an area in/out of only one layer easier. - </description> - </method> - <method name="set_collision_mask_bit"> - <return type="void"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <argument index="1" name="value" type="bool"> - </argument> - <description> - Set/clear individual bits on the collision mask. This makes selecting the areas scanned easier. - </description> - </method> </methods> <members> <member name="angular_damp" type="float" setter="set_angular_damp" getter="get_angular_damp" default="1.0"> @@ -100,12 +60,6 @@ <member name="audio_bus_override" type="bool" setter="set_audio_bus_override" getter="is_overriding_audio_bus" default="false"> If [code]true[/code], the area's audio bus overrides the default audio bus. </member> - <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer" default="1"> - The area's physics layer(s). Collidable objects can exist in any of 32 different layers. A contact is detected if object A is in any of the layers that object B scans, or object B is in any layers that object A scans. See also [member collision_mask]. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. - </member> - <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1"> - The physics layers this area scans to determine collision detection. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. - </member> <member name="gravity" type="float" setter="set_gravity" getter="get_gravity" default="98.0"> The area's gravity intensity (ranges from -1024 to 1024). This value multiplies the gravity vector. This is useful to alter the force of gravity without altering its direction. </member> diff --git a/doc/classes/Area3D.xml b/doc/classes/Area3D.xml index 4271769155..e69a89a836 100644 --- a/doc/classes/Area3D.xml +++ b/doc/classes/Area3D.xml @@ -1,34 +1,16 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="Area3D" inherits="CollisionObject3D" version="4.0"> <brief_description> - General-purpose area node for detection and 3D physics influence. + 3D area for detection and physics and audio influence. </brief_description> <description> - 3D area that detects [CollisionObject3D] nodes overlapping, entering, or exiting. Can also alter or override local physics parameters (gravity, damping). + 3D area that detects [CollisionObject3D] nodes overlapping, entering, or exiting. Can also alter or override local physics parameters (gravity, damping) and route audio to custom audio buses. </description> <tutorials> <link title="3D Platformer Demo">https://godotengine.org/asset-library/asset/125</link> <link title="GUI in 3D Demo">https://godotengine.org/asset-library/asset/127</link> </tutorials> <methods> - <method name="get_collision_layer_bit" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <description> - Returns an individual bit on the layer mask. - </description> - </method> - <method name="get_collision_mask_bit" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <description> - Returns an individual bit on the collision mask. - </description> - </method> <method name="get_overlapping_areas" qualifiers="const"> <return type="Area3D[]"> </return> @@ -64,28 +46,6 @@ The [code]body[/code] argument can either be a [PhysicsBody3D] or a [GridMap] instance (while GridMaps are not physics body themselves, they register their tiles with collision shapes as a virtual physics body). </description> </method> - <method name="set_collision_layer_bit"> - <return type="void"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <argument index="1" name="value" type="bool"> - </argument> - <description> - Set/clear individual bits on the layer mask. This simplifies editing this [Area3D]'s layers. - </description> - </method> - <method name="set_collision_mask_bit"> - <return type="void"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <argument index="1" name="value" type="bool"> - </argument> - <description> - Set/clear individual bits on the collision mask. This simplifies editing which [Area3D] layers this [Area3D] scans. - </description> - </method> </methods> <members> <member name="angular_damp" type="float" setter="set_angular_damp" getter="get_angular_damp" default="0.1"> @@ -98,12 +58,6 @@ <member name="audio_bus_override" type="bool" setter="set_audio_bus_override" getter="is_overriding_audio_bus" default="false"> If [code]true[/code], the area's audio bus overrides the default audio bus. </member> - <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer" default="1"> - The area's physics layer(s). Collidable objects can exist in any of 32 different layers. A contact is detected if object A is in any of the layers that object B scans, or object B is in any layers that object A scans. See also [member collision_mask]. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. - </member> - <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1"> - The physics layers this area scans to determine collision detection. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. - </member> <member name="gravity" type="float" setter="set_gravity" getter="get_gravity" default="9.8"> The area's gravity intensity (ranges from -1024 to 1024). This value multiplies the gravity vector. This is useful to alter the force of gravity without altering its direction. </member> diff --git a/doc/classes/CapsuleMesh.xml b/doc/classes/CapsuleMesh.xml index fab11d44cc..031abd0112 100644 --- a/doc/classes/CapsuleMesh.xml +++ b/doc/classes/CapsuleMesh.xml @@ -12,7 +12,8 @@ </methods> <members> <member name="mid_height" type="float" setter="set_mid_height" getter="get_mid_height" default="1.0"> - Height of the capsule mesh from the center point. + Height of the middle cylindrical part of the capsule (without the hemispherical ends). + [b]Note:[/b] The capsule's total height is equal to [member mid_height] + 2 * [member radius]. </member> <member name="radial_segments" type="int" setter="set_radial_segments" getter="get_radial_segments" default="64"> Number of radial segments on the capsule mesh. diff --git a/doc/classes/CollisionObject2D.xml b/doc/classes/CollisionObject2D.xml index e8f7a59e4c..e18970d84f 100644 --- a/doc/classes/CollisionObject2D.xml +++ b/doc/classes/CollisionObject2D.xml @@ -31,6 +31,24 @@ Creates a new shape owner for the given object. Returns [code]owner_id[/code] of the new owner for future reference. </description> </method> + <method name="get_collision_layer_bit" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <description> + Returns whether or not the specified [code]bit[/code] of the [member collision_layer] is set. + </description> + </method> + <method name="get_collision_mask_bit" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <description> + Returns whether or not the specified [code]bit[/code] of the [member collision_mask] is set. + </description> + </method> <method name="get_rid" qualifiers="const"> <return type="RID"> </return> @@ -90,6 +108,30 @@ Returns the [code]owner_id[/code] of the given shape. </description> </method> + <method name="set_collision_layer_bit"> + <return type="void"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <argument index="1" name="value" type="bool"> + </argument> + <description> + If [code]value[/value] is [code]true[/code], sets the specified [code]bit[/code] in the the [member collision_layer]. + If [code]value[/value] is [code]false[/code], clears the specified [code]bit[/code] in the the [member collision_layer]. + </description> + </method> + <method name="set_collision_mask_bit"> + <return type="void"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <argument index="1" name="value" type="bool"> + </argument> + <description> + If [code]value[/value] is [code]true[/code], sets the specified [code]bit[/code] in the the [member collision_mask]. + If [code]value[/value] is [code]false[/code], clears the specified [code]bit[/code] in the the [member collision_mask]. + </description> + </method> <method name="shape_owner_add_shape"> <return type="void"> </return> @@ -216,6 +258,14 @@ </method> </methods> <members> + <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer" default="1"> + The physics layers this CollisionObject2D is in. Collision objects can exist in one or more of 32 different layers. See also [member collision_mask]. + [b]Note:[/b] A contact is detected if object A is in any of the layers that object B scans, or object B is in any layers that object A scans. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. + </member> + <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1"> + The physics layers this CollisionObject2D scans. Collision objects can scan one or more of 32 different layers. See also [member collision_layer]. + [b]Note:[/b] A contact is detected if object A is in any of the layers that object B scans, or object B is in any layers that object A scans. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. + </member> <member name="input_pickable" type="bool" setter="set_pickable" getter="is_pickable" default="true"> If [code]true[/code], this object is pickable. A pickable object can detect the mouse pointer entering/leaving, and if the mouse is inside it, report input events. Requires at least one [code]collision_layer[/code] bit to be set. </member> diff --git a/doc/classes/CollisionObject3D.xml b/doc/classes/CollisionObject3D.xml index f8e897653d..4523a63c4c 100644 --- a/doc/classes/CollisionObject3D.xml +++ b/doc/classes/CollisionObject3D.xml @@ -35,6 +35,24 @@ Creates a new shape owner for the given object. Returns [code]owner_id[/code] of the new owner for future reference. </description> </method> + <method name="get_collision_layer_bit" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <description> + Returns whether or not the specified [code]bit[/code] of the [member collision_layer] is set. + </description> + </method> + <method name="get_collision_mask_bit" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <description> + Returns whether or not the specified [code]bit[/code] of the [member collision_mask] is set. + </description> + </method> <method name="get_rid" qualifiers="const"> <return type="RID"> </return> @@ -67,6 +85,30 @@ Removes the given shape owner. </description> </method> + <method name="set_collision_layer_bit"> + <return type="void"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <argument index="1" name="value" type="bool"> + </argument> + <description> + If [code]value[/value] is [code]true[/code], sets the specified [code]bit[/code] in the the [member collision_layer]. + If [code]value[/value] is [code]false[/code], clears the specified [code]bit[/code] in the the [member collision_layer]. + </description> + </method> + <method name="set_collision_mask_bit"> + <return type="void"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <argument index="1" name="value" type="bool"> + </argument> + <description> + If [code]value[/value] is [code]true[/code], sets the specified [code]bit[/code] in the the [member collision_mask]. + If [code]value[/value] is [code]false[/code], clears the specified [code]bit[/code] in the the [member collision_mask]. + </description> + </method> <method name="shape_find_owner" qualifiers="const"> <return type="int"> </return> @@ -180,6 +222,17 @@ </method> </methods> <members> + <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer" default="1"> + The physics layers this CollisionObject3D is in. Collision objects can exist in one or more of 32 different layers. See also [member collision_mask]. + [b]Note:[/b] A contact is detected if object A is in any of the layers that object B scans, or object B is in any layers that object A scans. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. + </member> + <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1"> + The physics layers this CollisionObject3D scans. Collision objects can scan one or more of 32 different layers. See also [member collision_layer]. + [b]Note:[/b] A contact is detected if object A is in any of the layers that object B scans, or object B is in any layers that object A scans. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. + </member> + <member name="input_pickable" type="bool" setter="set_pickable" getter="is_pickable" default="true"> + If [code]true[/code], this object is pickable. A pickable object can detect the mouse pointer entering/leaving, and if the mouse is inside it, report input events. Requires at least one [code]collision_layer[/code] bit to be set. + </member> <member name="input_capture_on_drag" type="bool" setter="set_capture_input_on_drag" getter="get_capture_input_on_drag" default="false"> If [code]true[/code], the [CollisionObject3D] will continue to receive input events as the mouse is dragged across its shapes. </member> diff --git a/doc/classes/Color.xml b/doc/classes/Color.xml index c33d007735..d645588af2 100644 --- a/doc/classes/Color.xml +++ b/doc/classes/Color.xml @@ -269,7 +269,7 @@ <argument index="1" name="weight" type="float"> </argument> <description> - Returns the linear interpolation with another color. The interpolation factor [code]t[/code] is between 0 and 1. + Returns the linear interpolation with another color. The interpolation factor [code]weight[/code] is between 0 and 1. [codeblocks] [gdscript] var c1 = Color(1.0, 0.0, 0.0) diff --git a/doc/classes/ColorPicker.xml b/doc/classes/ColorPicker.xml index 83223bb645..fddfd27573 100644 --- a/doc/classes/ColorPicker.xml +++ b/doc/classes/ColorPicker.xml @@ -51,7 +51,7 @@ If [code]true[/code], allows editing the color with Hue/Saturation/Value sliders. [b]Note:[/b] Cannot be enabled if raw mode is on. </member> - <member name="picker_shape" type="int" setter="set_picker_shape" getter="get_picker_shape" default="0"> + <member name="picker_shape" type="int" setter="set_picker_shape" getter="get_picker_shape" enum="ColorPicker.PickerShapeType" default="0"> The shape of the color space view. See [enum PickerShapeType]. </member> <member name="presets_enabled" type="bool" setter="set_presets_enabled" getter="are_presets_enabled" default="true"> @@ -122,6 +122,8 @@ <theme_item name="overbright_indicator" type="Texture2D"> The indicator used to signalize that the color value is outside the 0-1 range. </theme_item> + <theme_item name="picker_cursor" type="Texture2D"> + </theme_item> <theme_item name="preset_bg" type="Texture2D"> </theme_item> <theme_item name="screen_picker" type="Texture2D"> diff --git a/doc/classes/Engine.xml b/doc/classes/Engine.xml index f9d8cf574a..1147b52102 100644 --- a/doc/classes/Engine.xml +++ b/doc/classes/Engine.xml @@ -156,7 +156,15 @@ </methods> <members> <member name="editor_hint" type="bool" setter="set_editor_hint" getter="is_editor_hint" default="true"> - If [code]true[/code], it is running inside the editor. Useful for tool scripts. + If [code]true[/code], the script is currently running inside the editor. This is useful for [code]@tool[/code] scripts to conditionally draw editor helpers, or prevent accidentally running "game" code that would affect the scene state while in the editor: + [codeblock] + if Engine.editor_hint: + draw_gizmos() + else: + simulate_physics() + [/codeblock] + See [url=https://docs.godotengine.org/en/latest/tutorials/plugins/running_code_in_the_editor.html]Running code in the editor[/url] in the documentation for more information. + [b]Note:[/b] To detect whether the script is run from an editor [i]build[/i] (e.g. when pressing [kbd]F5[/kbd]), use [method OS.has_feature] with the [code]"editor"[/code] argument instead. [code]OS.has_feature("editor")[/code] will evaluate to [code]true[/code] both when the code is running in the editor and when running the project from the editor, but it will evaluate to [code]false[/code] when the code is run from an exported project. </member> <member name="iterations_per_second" type="int" setter="set_iterations_per_second" getter="get_iterations_per_second" default="60"> The number of fixed iterations per second. This controls how often physics simulation and [method Node._physics_process] methods are run. This value should generally always be set to [code]60[/code] or above, as Godot doesn't interpolate the physics step. As a result, values lower than [code]60[/code] will look stuttery. This value can be increased to make input more reactive or work around tunneling issues, but keep in mind doing so will increase CPU usage. diff --git a/doc/classes/Geometry2D.xml b/doc/classes/Geometry2D.xml index 2c0d9b54d1..13354ec19e 100644 --- a/doc/classes/Geometry2D.xml +++ b/doc/classes/Geometry2D.xml @@ -184,7 +184,7 @@ </argument> <description> Merges (combines) [code]polygon_a[/code] and [code]polygon_b[/code] and returns an array of merged polygons. This performs [constant OPERATION_UNION] between polygons. - The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distinguished by calling [method is_polygon_clockwise]. + The operation may result in an outer polygon (boundary) and multiple inner polygons (holes) produced which could be distinguished by calling [method is_polygon_clockwise]. </description> </method> <method name="offset_polygon"> diff --git a/doc/classes/HeightMapShape3D.xml b/doc/classes/HeightMapShape3D.xml index 6d230bdab8..f6f2a27891 100644 --- a/doc/classes/HeightMapShape3D.xml +++ b/doc/classes/HeightMapShape3D.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="HeightMapShape3D" inherits="Shape3D" version="4.0"> <brief_description> - Height map shape for 3D physics (Bullet only). + Height map shape for 3D physics. </brief_description> <description> Height map shape resource, which can be added to a [PhysicsBody3D] or [Area3D]. diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml index 9d87c9bf9a..91a07f66e0 100644 --- a/doc/classes/Image.xml +++ b/doc/classes/Image.xml @@ -186,7 +186,8 @@ <return type="int" enum="Error"> </return> <description> - Decompresses the image if it is compressed. Returns an error if decompress function is not available. + Decompresses the image if it is VRAM compressed in a supported format. Returns [constant OK] if the format is supported, otherwise [constant ERR_UNAVAILABLE]. + [b]Note:[/b] The following formats can be decompressed: DXT, RGTC, BPTC, PVRTC1. The formats ETC1 and ETC2 are not supported. </description> </method> <method name="detect_alpha" qualifiers="const"> diff --git a/doc/classes/LineEdit.xml b/doc/classes/LineEdit.xml index 360f5c451e..7adf19632e 100644 --- a/doc/classes/LineEdit.xml +++ b/doc/classes/LineEdit.xml @@ -12,34 +12,25 @@ - [kbd]Ctrl + Z[/kbd]: Undo - [kbd]Ctrl + ~[/kbd]: Swap input direction. - [kbd]Ctrl + Shift + Z[/kbd]: Redo - - [kbd]Ctrl + U[/kbd]: Delete text from the cursor position to the beginning of the line - - [kbd]Ctrl + K[/kbd]: Delete text from the cursor position to the end of the line + - [kbd]Ctrl + U[/kbd]: Delete text from the caret position to the beginning of the line + - [kbd]Ctrl + K[/kbd]: Delete text from the caret position to the end of the line - [kbd]Ctrl + A[/kbd]: Select all text - - [kbd]Up Arrow[/kbd]/[kbd]Down Arrow[/kbd]: Move the cursor to the beginning/end of the line + - [kbd]Up Arrow[/kbd]/[kbd]Down Arrow[/kbd]: Move the caret to the beginning/end of the line On macOS, some extra keyboard shortcuts are available: - - [kbd]Ctrl + F[/kbd]: Same as [kbd]Right Arrow[/kbd], move the cursor one character right - - [kbd]Ctrl + B[/kbd]: Same as [kbd]Left Arrow[/kbd], move the cursor one character left - - [kbd]Ctrl + P[/kbd]: Same as [kbd]Up Arrow[/kbd], move the cursor to the previous line - - [kbd]Ctrl + N[/kbd]: Same as [kbd]Down Arrow[/kbd], move the cursor to the next line - - [kbd]Ctrl + D[/kbd]: Same as [kbd]Delete[/kbd], delete the character on the right side of cursor - - [kbd]Ctrl + H[/kbd]: Same as [kbd]Backspace[/kbd], delete the character on the left side of the cursor - - [kbd]Ctrl + A[/kbd]: Same as [kbd]Home[/kbd], move the cursor to the beginning of the line - - [kbd]Ctrl + E[/kbd]: Same as [kbd]End[/kbd], move the cursor to the end of the line - - [kbd]Cmd + Left Arrow[/kbd]: Same as [kbd]Home[/kbd], move the cursor to the beginning of the line - - [kbd]Cmd + Right Arrow[/kbd]: Same as [kbd]End[/kbd], move the cursor to the end of the line + - [kbd]Ctrl + F[/kbd]: Same as [kbd]Right Arrow[/kbd], move the caret one character right + - [kbd]Ctrl + B[/kbd]: Same as [kbd]Left Arrow[/kbd], move the caret one character left + - [kbd]Ctrl + P[/kbd]: Same as [kbd]Up Arrow[/kbd], move the caret to the previous line + - [kbd]Ctrl + N[/kbd]: Same as [kbd]Down Arrow[/kbd], move the caret to the next line + - [kbd]Ctrl + D[/kbd]: Same as [kbd]Delete[/kbd], delete the character on the right side of caret + - [kbd]Ctrl + H[/kbd]: Same as [kbd]Backspace[/kbd], delete the character on the left side of the caret + - [kbd]Ctrl + A[/kbd]: Same as [kbd]Home[/kbd], move the caret to the beginning of the line + - [kbd]Ctrl + E[/kbd]: Same as [kbd]End[/kbd], move the caret to the end of the line + - [kbd]Cmd + Left Arrow[/kbd]: Same as [kbd]Home[/kbd], move the caret to the beginning of the line + - [kbd]Cmd + Right Arrow[/kbd]: Same as [kbd]End[/kbd], move the caret to the end of the line </description> <tutorials> </tutorials> <methods> - <method name="append_at_cursor"> - <return type="void"> - </return> - <argument index="0" name="text" type="String"> - </argument> - <description> - Adds [code]text[/code] after the cursor. If the resulting value is longer than [member max_length], nothing happens. - </description> - </method> <method name="clear"> <return type="void"> </return> @@ -54,11 +45,11 @@ Removes all OpenType features. </description> </method> - <method name="delete_char_at_cursor"> + <method name="delete_char_at_caret"> <return type="void"> </return> <description> - Deletes one character at the cursor's current position (equivalent to pressing [kbd]Delete[/kbd]). + Deletes one character at the caret's current position (equivalent to pressing [kbd]Delete[/kbd]). </description> </method> <method name="delete_text"> @@ -99,7 +90,16 @@ <return type="int"> </return> <description> - Returns the scroll offset due to [member caret_position], as a number of characters. + Returns the scroll offset due to [member caret_column], as a number of characters. + </description> + </method> + <method name="insert_text_at_caret"> + <return type="void"> + </return> + <argument index="0" name="text" type="String"> + </argument> + <description> + Inserts [code]text[/code] at the caret. If the resulting value is longer than [member max_length], nothing happens. </description> </method> <method name="menu_option"> @@ -159,21 +159,21 @@ <member name="align" type="int" setter="set_align" getter="get_align" enum="LineEdit.Align" default="0"> Text alignment as defined in the [enum Align] enum. </member> - <member name="caret_blink" type="bool" setter="cursor_set_blink_enabled" getter="cursor_get_blink_enabled" default="false"> - If [code]true[/code], the caret (visual cursor) blinks. + <member name="caret_blink" type="bool" setter="set_caret_blink_enabled" getter="is_caret_blink_enabled" default="false"> + If [code]true[/code], the caret (text cursor) blinks. </member> - <member name="caret_blink_speed" type="float" setter="cursor_set_blink_speed" getter="cursor_get_blink_speed" default="0.65"> + <member name="caret_blink_speed" type="float" setter="set_caret_blink_speed" getter="get_caret_blink_speed" default="0.65"> Duration (in seconds) of a caret's blinking cycle. </member> - <member name="caret_force_displayed" type="bool" setter="cursor_set_force_displayed" getter="cursor_get_force_displayed" default="false"> + <member name="caret_column" type="int" setter="set_caret_column" getter="get_caret_column" default="0"> + The caret's column position inside the [LineEdit]. When set, the text may scroll to accommodate it. </member> - <member name="caret_mid_grapheme" type="bool" setter="set_mid_grapheme_caret_enabled" getter="get_mid_grapheme_caret_enabled" default="false"> + <member name="caret_force_displayed" type="bool" setter="set_caret_force_displayed" getter="is_caret_force_displayed" default="false"> + </member> + <member name="caret_mid_grapheme" type="bool" setter="set_caret_mid_grapheme_enabled" getter="is_caret_mid_grapheme_enabled" default="false"> Allow moving caret, selecting and removing the individual composite character components. Note: [kbd]Backspace[/kbd] is always removing individual composite character components. </member> - <member name="caret_position" type="int" setter="set_cursor_position" getter="get_cursor_position" default="0"> - The cursor's position inside the [LineEdit]. When set, the text may scroll to accommodate it. - </member> <member name="clear_button_enabled" type="bool" setter="set_clear_button_enabled" getter="is_clear_button_enabled" default="false"> If [code]true[/code], the [LineEdit] will show a clear button if [code]text[/code] is not empty, which can be used to clear the text quickly. </member> @@ -186,7 +186,7 @@ <member name="editable" type="bool" setter="set_editable" getter="is_editable" default="true"> If [code]false[/code], existing text cannot be modified and new text cannot be added. </member> - <member name="expand_to_text_length" type="bool" setter="set_expand_to_text_length" getter="get_expand_to_text_length" default="false"> + <member name="expand_to_text_length" type="bool" setter="set_expand_to_text_length_enabled" getter="is_expand_to_text_length_enabled" default="false"> If [code]true[/code], the [LineEdit] width will increase to stay longer than the [member text]. It will [b]not[/b] compress if the [member text] is shortened. </member> <member name="focus_mode" type="int" setter="set_focus_mode" getter="get_focus_mode" override="true" enum="Control.FocusMode" default="2" /> @@ -276,7 +276,7 @@ Copies the selected text. </constant> <constant name="MENU_PASTE" value="2" enum="MenuItems"> - Pastes the clipboard text over the selected text (or at the cursor's position). + Pastes the clipboard text over the selected text (or at the caret's position). Non-printable escape characters are automatically stripped from the OS clipboard via [method String.strip_escapes]. </constant> <constant name="MENU_CLEAR" value="3" enum="MenuItems"> @@ -359,6 +359,9 @@ </constant> </constants> <theme_items> + <theme_item name="caret_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> + Color of the [LineEdit]'s caret (text cursor). + </theme_item> <theme_item name="clear" type="Texture2D"> Texture for the clear button. See [member clear_button_enabled]. </theme_item> @@ -368,9 +371,6 @@ <theme_item name="clear_button_color_pressed" type="Color" default="Color( 1, 1, 1, 1 )"> Color used for the clear button when it's pressed. </theme_item> - <theme_item name="cursor_color" type="Color" default="Color( 0.94, 0.94, 0.94, 1 )"> - Color of the [LineEdit]'s visual cursor (caret). - </theme_item> <theme_item name="focus" type="StyleBox"> Background used when [LineEdit] has GUI focus. </theme_item> diff --git a/doc/classes/MeshInstance3D.xml b/doc/classes/MeshInstance3D.xml index 82cd392cd3..b015a21d67 100644 --- a/doc/classes/MeshInstance3D.xml +++ b/doc/classes/MeshInstance3D.xml @@ -20,6 +20,13 @@ This helper creates a [StaticBody3D] child node with a [ConvexPolygonShape3D] collision shape calculated from the mesh geometry. It's mainly used for testing. </description> </method> + <method name="create_multiple_convex_collisions"> + <return type="void"> + </return> + <description> + This helper creates a [StaticBody3D] child node with multiple [ConvexPolygonShape3D] collision shapes calculated from the mesh geometry via convex decomposition. It's mainly used for testing. + </description> + </method> <method name="create_debug_tangents"> <return type="void"> </return> @@ -43,7 +50,7 @@ Returns the [Material] that will be used by the [Mesh] when drawing. This can return the [member GeometryInstance3D.material_override], the surface override [Material] defined in this [MeshInstance3D], or the surface [Material] defined in the [Mesh]. For example, if [member GeometryInstance3D.material_override] is used, all surfaces will return the override material. </description> </method> - <method name="get_surface_material" qualifiers="const"> + <method name="get_surface_override_material" qualifiers="const"> <return type="Material"> </return> <argument index="0" name="surface" type="int"> @@ -52,14 +59,14 @@ Returns the override [Material] for the specified surface of the [Mesh] resource. </description> </method> - <method name="get_surface_material_count" qualifiers="const"> + <method name="get_surface_override_material_count" qualifiers="const"> <return type="int"> </return> <description> - Returns the number of surface materials. + Returns the number of surface override materials. This is equivalent to [method Mesh.get_surface_count]. </description> </method> - <method name="set_surface_material"> + <method name="set_surface_override_material"> <return type="void"> </return> <argument index="0" name="surface" type="int"> diff --git a/doc/classes/Node.xml b/doc/classes/Node.xml index b5335e47cd..523f3a0c17 100644 --- a/doc/classes/Node.xml +++ b/doc/classes/Node.xml @@ -38,7 +38,7 @@ </description> </method> <method name="_get_configuration_warnings" qualifiers="virtual"> - <return type="Array"> + <return type="String[]"> </return> <description> The elements in the array returned from this method are displayed as warnings in the Scene Dock if the script that overrides it is a [code]tool[/code] script. diff --git a/doc/classes/PackedByteArray.xml b/doc/classes/PackedByteArray.xml index 21f835a53c..24178c3ff6 100644 --- a/doc/classes/PackedByteArray.xml +++ b/doc/classes/PackedByteArray.xml @@ -61,6 +61,114 @@ Returns a new [PackedByteArray] with the data compressed. Set the compression mode using one of [enum File.CompressionMode]'s constants. </description> </method> + <method name="decode_double" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_float" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_half" qualifiers="const"> + <return type="float"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_s16" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_s32" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_s64" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_s8" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_u16" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_u32" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_u64" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_u8" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <description> + </description> + </method> + <method name="decode_var" qualifiers="const"> + <return type="Variant"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="allow_objects" type="bool" default="false"> + </argument> + <description> + </description> + </method> + <method name="decode_var_size" qualifiers="const"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="allow_objects" type="bool" default="false"> + </argument> + <description> + </description> + </method> <method name="decompress" qualifiers="const"> <return type="PackedByteArray"> </return> @@ -92,6 +200,128 @@ Creates a copy of the array, and returns it. </description> </method> + <method name="encode_double"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="float"> + </argument> + <description> + </description> + </method> + <method name="encode_float"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="float"> + </argument> + <description> + </description> + </method> + <method name="encode_half"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="float"> + </argument> + <description> + </description> + </method> + <method name="encode_s16"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + </description> + </method> + <method name="encode_s32"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + </description> + </method> + <method name="encode_s64"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + </description> + </method> + <method name="encode_s8"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + </description> + </method> + <method name="encode_u16"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + </description> + </method> + <method name="encode_u32"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + </description> + </method> + <method name="encode_u64"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + </description> + </method> + <method name="encode_u8"> + <return type="void"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="int"> + </argument> + <description> + </description> + </method> + <method name="encode_var"> + <return type="int"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="value" type="Variant"> + </argument> + <argument index="2" name="allow_objects" type="bool" default="false"> + </argument> + <description> + </description> + </method> <method name="get_string_from_ascii" qualifiers="const"> <return type="String"> </return> @@ -129,6 +359,16 @@ Returns [code]true[/code] if the array contains [code]value[/code]. </description> </method> + <method name="has_encoded_var" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="byte_offset" type="int"> + </argument> + <argument index="1" name="allow_objects" type="bool" default="false"> + </argument> + <description> + </description> + </method> <method name="hex_encode" qualifiers="const"> <return type="String"> </return> diff --git a/doc/classes/PackedFloat32Array.xml b/doc/classes/PackedFloat32Array.xml index 6be1d24b5d..5e0008852c 100644 --- a/doc/classes/PackedFloat32Array.xml +++ b/doc/classes/PackedFloat32Array.xml @@ -111,6 +111,14 @@ <description> </description> </method> + <method name="operator []" qualifiers="operator"> + <return type="float"> + </return> + <argument index="0" name="index" type="int"> + </argument> + <description> + </description> + </method> <method name="push_back"> <return type="bool"> </return> diff --git a/doc/classes/PhysicsBody2D.xml b/doc/classes/PhysicsBody2D.xml index 9c3c47afba..e43d3bb762 100644 --- a/doc/classes/PhysicsBody2D.xml +++ b/doc/classes/PhysicsBody2D.xml @@ -26,24 +26,6 @@ Returns an array of nodes that were added as collision exceptions for this body. </description> </method> - <method name="get_collision_layer_bit" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <description> - Returns an individual bit on the [member collision_layer]. - </description> - </method> - <method name="get_collision_mask_bit" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <description> - Returns an individual bit on the [member collision_mask]. - </description> - </method> <method name="remove_collision_exception_with"> <return type="void"> </return> @@ -53,38 +35,8 @@ Removes a body from the list of bodies that this body can't collide with. </description> </method> - <method name="set_collision_layer_bit"> - <return type="void"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <argument index="1" name="value" type="bool"> - </argument> - <description> - Sets individual bits on the [member collision_layer] bitmask. Use this if you only need to change one layer's value. - </description> - </method> - <method name="set_collision_mask_bit"> - <return type="void"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <argument index="1" name="value" type="bool"> - </argument> - <description> - Sets individual bits on the [member collision_mask] bitmask. Use this if you only need to change one layer's value. - </description> - </method> </methods> <members> - <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer" default="1"> - The physics layers this area is in. - Collidable objects can exist in any of 32 different layers. These layers work like a tagging system, and are not visual. A collidable can use these layers to select with which objects it can collide, using the [member collision_mask] property. - A contact is detected if object A is in any of the layers that object B scans, or object B is in any layer scanned by object A. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. - </member> - <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1"> - The physics layers this area scans for collisions. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. - </member> <member name="input_pickable" type="bool" setter="set_pickable" getter="is_pickable" override="true" default="false" /> </members> <constants> diff --git a/doc/classes/PhysicsBody3D.xml b/doc/classes/PhysicsBody3D.xml index 7de65603f9..2ad1e513c2 100644 --- a/doc/classes/PhysicsBody3D.xml +++ b/doc/classes/PhysicsBody3D.xml @@ -26,24 +26,6 @@ Returns an array of nodes that were added as collision exceptions for this body. </description> </method> - <method name="get_collision_layer_bit" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <description> - Returns an individual bit on the [member collision_layer]. - </description> - </method> - <method name="get_collision_mask_bit" qualifiers="const"> - <return type="bool"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <description> - Returns an individual bit on the [member collision_mask]. - </description> - </method> <method name="remove_collision_exception_with"> <return type="void"> </return> @@ -53,38 +35,8 @@ Removes a body from the list of bodies that this body can't collide with. </description> </method> - <method name="set_collision_layer_bit"> - <return type="void"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <argument index="1" name="value" type="bool"> - </argument> - <description> - Sets individual bits on the [member collision_layer] bitmask. Use this if you only need to change one layer's value. - </description> - </method> - <method name="set_collision_mask_bit"> - <return type="void"> - </return> - <argument index="0" name="bit" type="int"> - </argument> - <argument index="1" name="value" type="bool"> - </argument> - <description> - Sets individual bits on the [member collision_mask] bitmask. Use this if you only need to change one layer's value. - </description> - </method> </methods> <members> - <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer" default="1"> - The physics layers this area is in. - Collidable objects can exist in any of 32 different layers. These layers work like a tagging system, and are not visual. A collidable can use these layers to select with which objects it can collide, using the [member collision_mask] property. - A contact is detected if object A is in any of the layers that object B scans, or object B is in any layer scanned by object A. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. - </member> - <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1"> - The physics layers this area scans for collisions. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. - </member> </members> <constants> </constants> diff --git a/doc/classes/PhysicsServer2D.xml b/doc/classes/PhysicsServer2D.xml index 701a430538..229facd08b 100644 --- a/doc/classes/PhysicsServer2D.xml +++ b/doc/classes/PhysicsServer2D.xml @@ -659,11 +659,9 @@ </return> <argument index="0" name="body" type="RID"> </argument> - <argument index="1" name="receiver" type="Object"> - </argument> - <argument index="2" name="method" type="StringName"> + <argument index="1" name="callable" type="Callable"> </argument> - <argument index="3" name="userdata" type="Variant" default="null"> + <argument index="2" name="userdata" type="Variant" default="null"> </argument> <description> Sets the function used to calculate physics for an object, if that object allows it (see [method body_set_omit_force_integration]). diff --git a/doc/classes/PhysicsServer3D.xml b/doc/classes/PhysicsServer3D.xml index c61347ba0b..46de9e5282 100644 --- a/doc/classes/PhysicsServer3D.xml +++ b/doc/classes/PhysicsServer3D.xml @@ -653,11 +653,9 @@ </return> <argument index="0" name="body" type="RID"> </argument> - <argument index="1" name="receiver" type="Object"> - </argument> - <argument index="2" name="method" type="StringName"> + <argument index="1" name="callable" type="Callable"> </argument> - <argument index="3" name="userdata" type="Variant" default="null"> + <argument index="2" name="userdata" type="Variant" default="null"> </argument> <description> Sets the function used to calculate physics for an object, if that object allows it (see [method body_set_omit_force_integration]). diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index 5b9150ab04..2bfe7ad48f 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -6,7 +6,8 @@ <description> Contains global variables accessible from everywhere. Use [method get_setting], [method set_setting] or [method has_setting] to access them. Variables stored in [code]project.godot[/code] are also loaded into ProjectSettings, making this object very useful for reading custom game configuration options. When naming a Project Settings property, use the full path to the setting including the category. For example, [code]"application/config/name"[/code] for the project name. Category and property names can be viewed in the Project Settings dialog. - [b]Overriding:[/b] Any project setting can be overridden by creating a file named [code]override.cfg[/code] in the project's root directory. This can also be used in exported projects by placing this file in the same directory as the project binary. + [b]Feature tags:[/b] Project settings can be overriden for specific platforms and configurations (debug, release, ...) using [url=https://docs.godotengine.org/en/latest/tutorials/export/feature_tags.html]feature tags[/url]. + [b]Overriding:[/b] Any project setting can be overridden by creating a file named [code]override.cfg[/code] in the project's root directory. This can also be used in exported projects by placing this file in the same directory as the project binary. Overriding will still take the base project settings' [url=https://docs.godotengine.org/en/latest/tutorials/export/feature_tags.html]feature tags[/url] in account. Therefore, make sure to [i]also[/i] override the setting with the desired feature tags if you want them to override base project settings on all platforms and configurations. </description> <tutorials> <link title="3D Physics Tests Demo">https://godotengine.org/asset-library/asset/675</link> @@ -255,8 +256,8 @@ [b]Note:[/b] Changing this value will also change the user data folder's path if [member application/config/use_custom_user_dir] is [code]false[/code]. After renaming the project, you will no longer be able to access existing data in [code]user://[/code] unless you rename the old folder to match the new project name. See [url=https://docs.godotengine.org/en/latest/tutorials/io/data_paths.html]Data paths[/url] in the documentation for more information. </member> <member name="application/config/project_settings_override" type="String" setter="" getter="" default=""""> - Specifies a file to override project settings. For example: [code]user://custom_settings.cfg[/code]. - [b]Note:[/b] Regardless of this setting's value, [code]res://override.cfg[/code] will still be read to override the project settings (see this class' description at the top). + Specifies a file to override project settings. For example: [code]user://custom_settings.cfg[/code]. See "Overriding" in the [ProjectSettings] class description at the top for more information. + [b]Note:[/b] Regardless of this setting's value, [code]res://override.cfg[/code] will still be read to override the project settings. </member> <member name="application/config/use_custom_user_dir" type="bool" setter="" getter="" default="false"> If [code]true[/code], the project will save user data to its own user directory (see [member application/config/custom_user_dir_name]). This setting is only effective on desktop platforms. A name must be set in the [member application/config/custom_user_dir_name] setting for this to take effect. If [code]false[/code], the project will save user data to [code](OS user data directory)/Godot/app_userdata/(project name)[/code]. @@ -746,6 +747,11 @@ <member name="input_devices/pointing/ios/touch_delay" type="float" setter="" getter="" default="0.15"> Default delay for touch events. This only affects iOS devices. </member> + <member name="internationalization/locale/include_text_server_data" type="bool" setter="" getter="" default="false"> + If [code]true[/code], text server break iteration rule sets, dictionaries and other optional data are included in the exported project. + [b]Note:[/b] "ICU / HarfBuzz / Graphite" text server data includes dictionaries for Burmese, Chinese, Japanese, Khmer, Lao and Thai as well as Unicode Standard Annex #29 and Unicode Standard Annex #14 word and line breaking rules. Data is about 4 MB large. + [b]Note:[/b] "Fallback" text server does not use additional data. + </member> <member name="internationalization/locale/fallback" type="String" setter="" getter="" default=""en""> The locale to fall back to if a translation isn't available in a given language. If left empty, [code]en[/code] (English) will be used. </member> @@ -1149,7 +1155,7 @@ <member name="navigation/3d/default_cell_size" type="float" setter="" getter="" default="0.3"> Default cell size for 3D navigation maps. See [method NavigationServer3D.map_set_cell_size]. </member> - <member name="navigation/3d/default_edge_connection_margin" type="float" setter="" getter="" default="5.0"> + <member name="navigation/3d/default_edge_connection_margin" type="float" setter="" getter="" default="0.3"> Default edge connection margin for 3D navigation maps. See [method NavigationServer3D.map_set_edge_connection_margin]. </member> <member name="network/limits/debugger/max_chars_per_second" type="int" setter="" getter="" default="32768"> diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml index f82301bcf4..d6eaa1b88b 100644 --- a/doc/classes/RenderingServer.xml +++ b/doc/classes/RenderingServer.xml @@ -1317,7 +1317,7 @@ Sets the scenario that the instance is in. The scenario is the 3D world that the objects will be displayed in. </description> </method> - <method name="instance_set_surface_material"> + <method name="instance_set_surface_override_material"> <return type="void"> </return> <argument index="0" name="instance" type="RID"> @@ -1327,7 +1327,7 @@ <argument index="2" name="material" type="RID"> </argument> <description> - Sets the material of a specific surface. Equivalent to [method MeshInstance3D.set_surface_material]. + Sets the override material of a specific surface. Equivalent to [method MeshInstance3D.set_surface_override_material]. </description> </method> <method name="instance_set_transform"> diff --git a/doc/classes/Vector2.xml b/doc/classes/Vector2.xml index b979425b85..94d4b1a903 100644 --- a/doc/classes/Vector2.xml +++ b/doc/classes/Vector2.xml @@ -229,7 +229,7 @@ <argument index="1" name="weight" type="float"> </argument> <description> - Returns the result of the linear interpolation between this vector and [code]b[/code] by amount [code]t[/code]. [code]t[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. + Returns the result of the linear interpolation between this vector and [code]to[/code] by amount [code]weight[/code]. [code]weight[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. </description> </method> <method name="move_toward" qualifiers="const"> @@ -464,7 +464,7 @@ <argument index="1" name="weight" type="float"> </argument> <description> - Returns the result of spherical linear interpolation between this vector and [code]b[/code], by amount [code]t[/code]. [code]t[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. + Returns the result of spherical linear interpolation between this vector and [code]to[/code], by amount [code]weight[/code]. [code]weight[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. [b]Note:[/b] Both vectors must be normalized. </description> </method> diff --git a/doc/classes/Vector3.xml b/doc/classes/Vector3.xml index bd568e01ec..0a86369506 100644 --- a/doc/classes/Vector3.xml +++ b/doc/classes/Vector3.xml @@ -204,7 +204,7 @@ <argument index="1" name="weight" type="float"> </argument> <description> - Returns the result of the linear interpolation between this vector and [code]b[/code] by amount [code]weight[/code]. [code]weight[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. + Returns the result of the linear interpolation between this vector and [code]to[/code] by amount [code]weight[/code]. [code]weight[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. </description> </method> <method name="max_axis" qualifiers="const"> @@ -484,7 +484,7 @@ <argument index="1" name="weight" type="float"> </argument> <description> - Returns the result of spherical linear interpolation between this vector and [code]b[/code], by amount [code]t[/code]. [code]t[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. + Returns the result of spherical linear interpolation between this vector and [code]to[/code], by amount [code]weight[/code]. [code]weight[/code] is on the range of 0.0 to 1.0, representing the amount of interpolation. [b]Note:[/b] Both vectors must be normalized. </description> </method> diff --git a/doc/classes/VideoPlayer.xml b/doc/classes/VideoPlayer.xml index b2ab356b0d..d905ce4054 100644 --- a/doc/classes/VideoPlayer.xml +++ b/doc/classes/VideoPlayer.xml @@ -74,6 +74,7 @@ </member> <member name="stream_position" type="float" setter="set_stream_position" getter="get_stream_position"> The current position of the stream, in seconds. + [b]Note:[/b] Changing this value won't have any effect as seeking is not implemented yet, except in video formats implemented by a GDNative add-on. </member> <member name="volume" type="float" setter="set_volume" getter="get_volume"> Audio volume as a linear value. diff --git a/doc/classes/VisualShader.xml b/doc/classes/VisualShader.xml index c29c30289a..ff00a848b9 100644 --- a/doc/classes/VisualShader.xml +++ b/doc/classes/VisualShader.xml @@ -228,7 +228,9 @@ </constant> <constant name="TYPE_END" value="5" enum="Type"> </constant> - <constant name="TYPE_MAX" value="6" enum="Type"> + <constant name="TYPE_SKY" value="6" enum="Type"> + </constant> + <constant name="TYPE_MAX" value="7" enum="Type"> Represents the size of the [enum Type] enum. </constant> <constant name="NODE_ID_INVALID" value="-1"> |