diff options
Diffstat (limited to 'doc/classes')
26 files changed, 1326 insertions, 382 deletions
diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index 090ca5a033..585b94a522 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -1085,8 +1085,8 @@ <member name="TranslationServer" type="TranslationServer" setter="" getter=""> The [TranslationServer] singleton. </member> - <member name="VisualScriptEditor" type="VisualScriptEditor" setter="" getter=""> - The [VisualScriptEditor] singleton. + <member name="VisualScriptEditor" type="VisualScriptCustomNodes" setter="" getter=""> + The [VisualScriptCustomNodes] singleton. </member> <member name="XRServer" type="XRServer" setter="" getter=""> The [XRServer] singleton. diff --git a/doc/classes/Array.xml b/doc/classes/Array.xml index 7767a1028d..df0e3a0459 100644 --- a/doc/classes/Array.xml +++ b/doc/classes/Array.xml @@ -393,6 +393,14 @@ <description> </description> </method> + <method name="pop_at"> + <return type="Variant" /> + <argument index="0" name="position" type="int" /> + <description> + Removes and returns the element of the array at index [code]position[/code]. If negative, [code]position[/code] is considered relative to the end of the array. Leaves the array untouched and returns [code]null[/code] if the array is empty or if it's accessed out of bounds. An error message is printed when the array is accessed out of bounds, but not when the array is empty. + [b]Note:[/b] On large arrays, this method can be slower than [method pop_back] as it will reindex the array's elements that are located after the removed element. The larger the array and the lower the index of the removed element, the slower [method pop_at] will be. + </description> + </method> <method name="pop_back"> <return type="Variant" /> <description> diff --git a/doc/classes/AudioStreamPlayback.xml b/doc/classes/AudioStreamPlayback.xml index 09d063ed3b..25f3e076b4 100644 --- a/doc/classes/AudioStreamPlayback.xml +++ b/doc/classes/AudioStreamPlayback.xml @@ -26,7 +26,7 @@ </description> </method> <method name="_mix" qualifiers="virtual"> - <return type="void" /> + <return type="int" /> <argument index="0" name="buffer" type="AudioFrame*" /> <argument index="1" name="rate_scale" type="float" /> <argument index="2" name="frames" type="int" /> diff --git a/doc/classes/CanvasItem.xml b/doc/classes/CanvasItem.xml index 2c92ce0185..4641bc52a4 100644 --- a/doc/classes/CanvasItem.xml +++ b/doc/classes/CanvasItem.xml @@ -106,6 +106,20 @@ Draws a [Mesh] in 2D, using the provided texture. See [MeshInstance2D] for related documentation. </description> </method> + <method name="draw_msdf_texture_rect_region"> + <return type="void" /> + <argument index="0" name="texture" type="Texture2D" /> + <argument index="1" name="rect" type="Rect2" /> + <argument index="2" name="src_rect" type="Rect2" /> + <argument index="3" name="modulate" type="Color" default="Color(1, 1, 1, 1)" /> + <argument index="4" name="outline" type="float" default="0.0" /> + <argument index="5" name="pixel_range" type="float" default="4.0" /> + <description> + Draws a textured rectangle region of the multi-channel signed distance field texture at a given position, optionally modulated by a color. + If [code]outline[/code] is positive, each alpha channel value of pixel in region is set to maximum value of true distance in the [code]outline[/code] radius. + Value of the [code]pixel_range[/code] should the same that was used during distance field texture generation. + </description> + </method> <method name="draw_multiline"> <return type="void" /> <argument index="0" name="points" type="PackedVector2Array" /> diff --git a/doc/classes/ConfigFile.xml b/doc/classes/ConfigFile.xml index f970be23a6..d6da4bc248 100644 --- a/doc/classes/ConfigFile.xml +++ b/doc/classes/ConfigFile.xml @@ -149,6 +149,8 @@ </method> <method name="load"> <return type="int" enum="Error" /> + <returns_error number="0"/> + <returns_error number="12"/> <argument index="0" name="path" type="String" /> <description> Loads the config file specified as a parameter. The file's contents are parsed and loaded in the [ConfigFile] object which the method was called on. diff --git a/doc/classes/Engine.xml b/doc/classes/Engine.xml index 886a18900e..8b399f64c9 100644 --- a/doc/classes/Engine.xml +++ b/doc/classes/Engine.xml @@ -84,11 +84,16 @@ </method> <method name="get_singleton" qualifiers="const"> <return type="Object" /> - <argument index="0" name="name" type="String" /> + <argument index="0" name="name" type="StringName" /> <description> Returns a global singleton with given [code]name[/code]. Often used for plugins, e.g. GodotPayments. </description> </method> + <method name="get_singleton_list" qualifiers="const"> + <return type="PackedStringArray" /> + <description> + </description> + </method> <method name="get_version_info" qualifiers="const"> <return type="Dictionary" /> <description> @@ -125,7 +130,7 @@ </method> <method name="has_singleton" qualifiers="const"> <return type="bool" /> - <argument index="0" name="name" type="String" /> + <argument index="0" name="name" type="StringName" /> <description> Returns [code]true[/code] if a singleton with given [code]name[/code] exists in global scope. </description> @@ -136,6 +141,19 @@ Returns [code]true[/code] if the game is inside the fixed process and physics phase of the game loop. </description> </method> + <method name="register_singleton"> + <return type="void" /> + <argument index="0" name="name" type="StringName" /> + <argument index="1" name="instance" type="Object" /> + <description> + </description> + </method> + <method name="unregister_singleton"> + <return type="void" /> + <argument index="0" name="name" type="StringName" /> + <description> + </description> + </method> </methods> <members> <member name="editor_hint" type="bool" setter="set_editor_hint" getter="is_editor_hint" default="true"> diff --git a/doc/classes/Font.xml b/doc/classes/Font.xml index 06dcaca846..aa70856e32 100644 --- a/doc/classes/Font.xml +++ b/doc/classes/Font.xml @@ -70,6 +70,12 @@ Add font data source to the set. </description> </method> + <method name="clear_data"> + <return type="void" /> + <description> + Removes all font data sourcers for the set. + </description> + </method> <method name="draw_char" qualifiers="const"> <return type="float" /> <argument index="0" name="canvas_item" type="RID" /> @@ -151,6 +157,13 @@ Returns the number of font data sources. </description> </method> + <method name="get_data_rid" qualifiers="const"> + <return type="RID" /> + <argument index="0" name="idx" type="int" /> + <description> + Returns TextServer RID of the font data resources. + </description> + </method> <method name="get_descent" qualifiers="const"> <return type="float" /> <argument index="0" name="size" type="int" default="-1" /> @@ -180,15 +193,18 @@ </method> <method name="get_spacing" qualifiers="const"> <return type="int" /> - <argument index="0" name="type" type="int" /> + <argument index="0" name="spacing" type="int" enum="TextServer.SpacingType" /> <description> - Returns the spacing for the given [code]type[/code] (see [enum SpacingType]). + Returns the spacing for the given [code]type[/code] (see [enum TextServer.SpacingType]). </description> </method> <method name="get_string_size" qualifiers="const"> <return type="Vector2" /> <argument index="0" name="text" type="String" /> <argument index="1" name="size" type="int" default="-1" /> + <argument index="2" name="align" type="int" enum="HAlign" default="0" /> + <argument index="3" name="width" type="float" default="-1" /> + <argument index="4" name="flags" type="int" default="3" /> <description> Returns the size of a bounding box of a string, taking kerning and advance into account. [b]Note:[/b] Real height of the string is context-dependent and can be significantly different from the value returned by [method get_height]. @@ -242,10 +258,10 @@ </method> <method name="set_spacing"> <return type="void" /> - <argument index="0" name="type" type="int" /> + <argument index="0" name="spacing" type="int" enum="TextServer.SpacingType" /> <argument index="1" name="value" type="int" /> <description> - Sets the spacing for [code]type[/code] (see [enum SpacingType]) to [code]value[/code] in pixels (not relative to the font size). + Sets the spacing for [code]type[/code] (see [enum TextServer.SpacingType]) to [code]value[/code] in pixels (not relative to the font size). </description> </method> <method name="update_changes"> @@ -256,19 +272,19 @@ </method> </methods> <members> - <member name="extra_spacing_bottom" type="int" setter="set_spacing" getter="get_spacing" default="0"> + <member name="base_size" type="int" setter="set_base_size" getter="get_base_size" default="16"> + Default font size. + </member> + <member name="spacing_bottom" type="int" setter="set_spacing" getter="get_spacing" default="0"> Extra spacing at the bottom of the line in pixels. </member> - <member name="extra_spacing_top" type="int" setter="set_spacing" getter="get_spacing" default="0"> + <member name="spacing_top" type="int" setter="set_spacing" getter="get_spacing" default="0"> Extra spacing at the top of the line in pixels. </member> + <member name="variation_coordinates" type="Dictionary" setter="set_variation_coordinates" getter="get_variation_coordinates" default="{}"> + Default font [url=https://docs.microsoft.com/en-us/typography/opentype/spec/dvaraxisreg]variation coordinates[/url]. + </member> </members> <constants> - <constant name="SPACING_TOP" value="0" enum="SpacingType"> - Spacing at the top of the line. - </constant> - <constant name="SPACING_BOTTOM" value="1" enum="SpacingType"> - Spacing at the bottom of the line. - </constant> </constants> </class> diff --git a/doc/classes/FontData.xml b/doc/classes/FontData.xml index 7a845a698f..72af7ca485 100644 --- a/doc/classes/FontData.xml +++ b/doc/classes/FontData.xml @@ -1,122 +1,179 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="FontData" inherits="Resource" version="4.0"> <brief_description> - Font data source, file or memory buffer. + Font source data and prerendered glyph cache, imported from dynamic or bitmap font. + Supported font formats: + - Dynamic font importer: TrueType (.ttf), OpenType (.otf), WOFF (.woff), Type 1 (.pfb, .pfm). + - Bitmap font importer: AngelCode BMFont (.fnt, .font), text and binary (version 3) format variants. + - Monospace image font importer: All supported image formats. </brief_description> <description> - Built-in text servers support font data sources of the following formats: - - Bitmap fonts in the [url=https://www.angelcode.com/products/bmfont/]BMFont[/url] format. Handles [code].fnt, *.font[/code] fonts containing texture atlases. Non-scalable. Supports distance fields. Complex text shaping support is limited. - - Dynamic fonts using the [url=https://www.freetype.org/]FreeType[/url] and [url=https://github.com/silnrsi/graphite/]Graphite[/url] library for rasterization. Handles [code]*.ttf, *.otf[/code] fonts. Scalable. Doesn't support distance fields. Supports complex text shaping and OpenType features. </description> <tutorials> </tutorials> <methods> - <method name="bitmap_add_char"> + <method name="clear_cache"> <return type="void" /> - <argument index="0" name="char" type="int" /> - <argument index="1" name="texture_idx" type="int" /> - <argument index="2" name="rect" type="Rect2" /> - <argument index="3" name="align" type="Vector2" /> - <argument index="4" name="advance" type="float" /> <description> - Adds a character to the font, where [code]character[/code] is the Unicode value, [code]texture[/code] is the texture index, [code]rect[/code] is the region in the texture (in pixels!), [code]align[/code] is the (optional) alignment for the character and [code]advance[/code] is the (optional) advance. + Removes all font cache entries. </description> </method> - <method name="bitmap_add_kerning_pair"> + <method name="clear_glyphs"> <return type="void" /> - <argument index="0" name="A" type="int" /> - <argument index="1" name="B" type="int" /> - <argument index="2" name="kerning" type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> <description> - Adds a kerning pair to the bitmap font as a difference. Kerning pairs are special cases where a typeface advance is determined by the next character. + Removes all rendered glyphs information from the cache entry. Note: This function will not remove textures associated with the glyphs, use [method remove_texture] to remove them manually. </description> </method> - <method name="bitmap_add_texture"> + <method name="clear_kerning_map"> <return type="void" /> - <argument index="0" name="texture" type="Texture" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> <description> - Adds a texture to the bitmap font. + Removes all kerning overrides. </description> </method> - <method name="draw_glyph" qualifiers="const"> - <return type="Vector2" /> - <argument index="0" name="canvas" type="RID" /> - <argument index="1" name="size" type="int" /> - <argument index="2" name="pos" type="Vector2" /> - <argument index="3" name="index" type="int" /> - <argument index="4" name="color" type="Color" default="Color(1, 1, 1, 1)" /> + <method name="clear_size_cache"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> <description> - Draws single glyph into a canvas item at the position, using [code]font[/code] at the size [code]size[/code]. - Returns advance of the glyph for horizontal and vertical layouts. - Note: Glyph index is bound to the font data, use only glyphs indices returned by [method TextServer.shaped_text_get_glyphs] or [method get_glyph_index] for this font data. + Removes all font sizes from the cache entry </description> </method> - <method name="draw_glyph_outline" qualifiers="const"> - <return type="Vector2" /> - <argument index="0" name="canvas" type="RID" /> - <argument index="1" name="size" type="int" /> - <argument index="2" name="outline_size" type="int" /> - <argument index="3" name="pos" type="Vector2" /> - <argument index="4" name="index" type="int" /> - <argument index="5" name="color" type="Color" default="Color(1, 1, 1, 1)" /> + <method name="clear_textures"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <description> + Removes all textures from font cache entry. Note: This function will not remove glyphs associated with the texture, use [method remove_glyph] to remove them manually. + </description> + </method> + <method name="find_cache" qualifiers="const"> + <return type="RID" /> + <argument index="0" name="variation_coordinates" type="Dictionary" /> <description> - Draws single glyph outline of size [code]outline_size[/code] into a canvas item at the position, using [code]font[/code] at the size [code]size[/code]. If outline drawing is not supported, nothing is drawn. - Returns advance of the glyph for horizontal and vertical layouts (regardless of outline drawing support). - Note: Glyph index is bound to the font data, use only glyphs indices returned by [method TextServer.shaped_text_get_glyphs] or [method get_glyph_index] for this font data. + Returns existing or creates a new font cache entry for the specified variation coordinates. </description> </method> <method name="get_ascent" qualifiers="const"> <return type="float" /> - <argument index="0" name="size" type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> <description> Returns the font ascent (number of pixels above the baseline). </description> </method> - <method name="get_base_size" qualifiers="const"> - <return type="float" /> + <method name="get_cache_count" qualifiers="const"> + <return type="int" /> <description> - Returns the base size of the font (the only size supported for non-scalable fonts, meaningless for scalable fonts). + Returns number of the font cache entries. + </description> + </method> + <method name="get_cache_rid" qualifiers="const"> + <return type="RID" /> + <argument index="0" name="cache_index" type="int" /> + <description> + Returns text server font cache entry resource id. + </description> + </method> + <method name="get_data" qualifiers="const"> + <return type="PackedByteArray" /> + <description> + Returns contents of the dynamic font source file. </description> </method> <method name="get_descent" qualifiers="const"> <return type="float" /> - <argument index="0" name="size" type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> <description> - Returns the font descent (number of pixels below the baseline). + Returns font descent (number of pixels below the baseline). </description> </method> <method name="get_glyph_advance" qualifiers="const"> <return type="Vector2" /> - <argument index="0" name="index" type="int" /> + <argument index="0" name="cache_index" type="int" /> <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph" type="int" /> <description> - Returns advance of the glyph for horizontal and vertical layouts. - Note: Glyph index is bound to the font data, use only glyphs indices returned by [method TextServer.shaped_text_get_glyphs] or [method get_glyph_index] for this font data. + Returns glyph advance (offset of the next glyph). Note: advance for glyphs outlines is the same as the base glyph advance and is not saved. </description> </method> <method name="get_glyph_index" qualifiers="const"> <return type="int" /> <argument index="0" name="char" type="int" /> - <argument index="1" name="variation_selector" type="int" default="0" /> + <argument index="1" name="variation_selector" type="int" /> + <argument index="2" name="arg2" type="int" /> <description> - Return the glyph index of a [code]char[/code], optionally modified by the [code]variation_selector[/code]. + Returns the glyph index of a [code]char[/code], optionally modified by the [code]variation_selector[/code]. </description> </method> - <method name="get_glyph_kerning" qualifiers="const"> + <method name="get_glyph_list" qualifiers="const"> + <return type="Array" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <description> + Returns list of rendered glyphs in the cache entry. + </description> + </method> + <method name="get_glyph_offset" qualifiers="const"> <return type="Vector2" /> - <argument index="0" name="index_a" type="int" /> - <argument index="1" name="index_b" type="int" /> - <argument index="2" name="size" type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> <description> - Returns a kerning of the pair of glyphs for horizontal and vertical layouts. - Note: Glyph index is bound to the font data, use only glyphs indices returned by [method TextServer.shaped_text_get_glyphs] or [method get_glyph_index] for this font data. + Returns glyph offset from the baseline. </description> </method> - <method name="get_height" qualifiers="const"> - <return type="float" /> - <argument index="0" name="size" type="int" /> + <method name="get_glyph_size" qualifiers="const"> + <return type="Vector2" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> <description> - Returns the total font height (ascent plus descent) in pixels. + Returns glyph size. + </description> + </method> + <method name="get_glyph_texture_idx" qualifiers="const"> + <return type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <description> + Returns index of the cache texture containing the glyph. + </description> + </method> + <method name="get_glyph_uv_rect" qualifiers="const"> + <return type="Rect2" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <description> + Returns rectangle in the cache texture containing the glyph. + </description> + </method> + <method name="get_hinting" qualifiers="const"> + <return type="int" enum="TextServer.Hinting" /> + <description> + Returns the font hinting mode. Used by dynamic fonts only. + </description> + </method> + <method name="get_kerning" qualifiers="const"> + <return type="Vector2" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph_pair" type="Vector2i" /> + <description> + Returns kerning for the pair of glyphs. + </description> + </method> + <method name="get_kerning_list" qualifiers="const"> + <return type="Array" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <description> + Returns list of the kerning overrides. </description> </method> <method name="get_language_support_override" qualifiers="const"> @@ -132,6 +189,32 @@ Returns list of language support overrides. </description> </method> + <method name="get_msdf_pixel_range" qualifiers="const"> + <return type="int" /> + <description> + Returns the width of the range around the shape between the minimum and maximum representable signed distance. + </description> + </method> + <method name="get_msdf_size" qualifiers="const"> + <return type="int" /> + <description> + Returns source font size used to generate MSDF textures. + </description> + </method> + <method name="get_oversampling" qualifiers="const"> + <return type="float" /> + <description> + Returns font oversampling factor, if set to [code]0.0[/code] global oversampling factor is used instead. Used by dynamic fonts only. + </description> + </method> + <method name="get_scale" qualifiers="const"> + <return type="float" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <description> + Returns scaling factor of the color bitmap font. + </description> + </method> <method name="get_script_support_override" qualifiers="const"> <return type="bool" /> <argument index="0" name="script" type="String" /> @@ -145,11 +228,20 @@ Returns list of script support overrides. </description> </method> + <method name="get_size_cache_list" qualifiers="const"> + <return type="Array" /> + <argument index="0" name="cache_index" type="int" /> + <description> + Return list of the font sizes in the cache. Each size is [code]Vector2i[/code] with font size and outline size. + </description> + </method> <method name="get_spacing" qualifiers="const"> <return type="int" /> - <argument index="0" name="type" type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="arg2" type="int" enum="TextServer.SpacingType" /> <description> - Returns the spacing for the given [code]type[/code] (see [enum SpacingType]). + Returns extra spacing added between glyphs in pixels. </description> </method> <method name="get_supported_chars" qualifiers="const"> @@ -158,32 +250,66 @@ Returns a string containing all the characters available in the font. </description> </method> - <method name="get_underline_position" qualifiers="const"> - <return type="float" /> - <argument index="0" name="size" type="int" /> + <method name="get_supported_feature_list" qualifiers="const"> + <return type="Dictionary" /> <description> - Returns underline offset (number of pixels below the baseline). + Returns list of OpenType features supported by font. </description> </method> - <method name="get_underline_thickness" qualifiers="const"> + <method name="get_supported_variation_list" qualifiers="const"> + <return type="Dictionary" /> + <description> + Returns list of supported [url=https://docs.microsoft.com/en-us/typography/opentype/spec/dvaraxisreg]variation coordinates[/url], each coordinate is returned as [code]tag: Vector3i(min_value,max_value,default_value)[/code]. + Font variations allow for continuous change of glyph characteristics along some given design axis, such as weight, width or slant. + </description> + </method> + <method name="get_texture_count" qualifiers="const"> + <return type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <description> + Returns number of textures used by font cache entry. + </description> + </method> + <method name="get_texture_image" qualifiers="const"> + <return type="Image" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <description> + Returns a copy of the font cache texture image. + </description> + </method> + <method name="get_texture_offsets" qualifiers="const"> + <return type="PackedInt32Array" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <description> + Returns a copy of the array containing the first free pixel in the each column of texture. Should be the same size as texture width or empty. + </description> + </method> + <method name="get_underline_position" qualifiers="const"> <return type="float" /> - <argument index="0" name="size" type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> <description> - Returns underline thickness in pixels. + Returns pixel offset of the underline below the baseline. </description> </method> - <method name="get_variation" qualifiers="const"> + <method name="get_underline_thickness" qualifiers="const"> <return type="float" /> - <argument index="0" name="tag" type="String" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> <description> - Returns variation coordinate [code]tag[/code]. + Returns thickness of the underline in pixels. </description> </method> - <method name="get_variation_list" qualifiers="const"> + <method name="get_variation_coordinates" qualifiers="const"> <return type="Dictionary" /> + <argument index="0" name="cache_index" type="int" /> <description> - Returns list of supported [url=https://docs.microsoft.com/en-us/typography/opentype/spec/dvaraxisreg]variation coordinates[/url], each coordinate is returned as [code]tag: Vector3i(min_value,max_value,default_value)[/code]. - Font variations allow for continuous change of glyph characteristics along some given design axis, such as weight, width or slant. + Returns variation coordinates for the specified font cache entry. See [method get_supported_variation_list] for more info. </description> </method> <method name="has_char" qualifiers="const"> @@ -193,10 +319,16 @@ Return [code]true[/code] if a Unicode [code]char[/code] is available in the font. </description> </method> - <method name="has_outline" qualifiers="const"> + <method name="is_antialiased" qualifiers="const"> + <return type="bool" /> + <description> + Returns [code]true[/code] if font 8-bit anitialiased glyph rendering is supported and enabled. + </description> + </method> + <method name="is_force_autohinter" qualifiers="const"> <return type="bool" /> <description> - Returns [code]true[/code], if font supports drawing glyph outlines. + Returns [code]true[/code] if auto-hinting is supported and preffered over font built-in hinting. Used by dynamic fonts only. </description> </method> <method name="is_language_supported" qualifiers="const"> @@ -206,6 +338,12 @@ Returns [code]true[/code], if font supports given language ([url=https://en.wikipedia.org/wiki/ISO_639-1]ISO 639[/url] code). </description> </method> + <method name="is_multichannel_signed_distance_field" qualifiers="const"> + <return type="bool" /> + <description> + Returns [code]true[/code] if glyphs of all sizes are rendered using single multichannel signed distance field generated from the dynamic font vector data. + </description> + </method> <method name="is_script_supported" qualifiers="const"> <return type="bool" /> <argument index="0" name="script" type="String" /> @@ -213,32 +351,29 @@ Returns [code]true[/code], if font supports given script ([url=https://en.wikipedia.org/wiki/ISO_15924]ISO 15924[/url] code). </description> </method> - <method name="load_memory"> + <method name="remove_cache"> <return type="void" /> - <argument index="0" name="data" type="PackedByteArray" /> - <argument index="1" name="type" type="String" /> - <argument index="2" name="base_size" type="int" default="16" /> + <argument index="0" name="cache_index" type="int" /> <description> - Creates new font from the data in memory. - Note: For non-scalable fonts [code]base_size[/code] is ignored, use [method get_base_size] to check actual font size. + Removes specified font cache entry. </description> </method> - <method name="load_resource"> + <method name="remove_glyph"> <return type="void" /> - <argument index="0" name="filename" type="String" /> - <argument index="1" name="base_size" type="int" default="16" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> <description> - Creates new font from the file. - Note: For non-scalable fonts [code]base_size[/code] is ignored, use [method get_base_size] to check actual font size. + Removes specified rendered glyph information from the cache entry. Note: This function will not remove textures associated with the glyphs, use [method remove_texture] to remove them manually. </description> </method> - <method name="new_bitmap"> + <method name="remove_kerning"> <return type="void" /> - <argument index="0" name="height" type="float" /> - <argument index="1" name="ascent" type="float" /> - <argument index="2" name="base_size" type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph_pair" type="Vector2i" /> <description> - Creates new, empty bitmap font. + Removes kerning override for the pair of glyphs. </description> </method> <method name="remove_language_support_override"> @@ -255,6 +390,148 @@ Removes script support override. </description> </method> + <method name="remove_size_cache"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <description> + Removes specified font size from the cache entry. + </description> + </method> + <method name="remove_texture"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <description> + Removes specified texture from font cache entry. Note: This function will not remove glyphs associated with the texture, remove them manually, using [method remove_glyph]. + </description> + </method> + <method name="render_glyph"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="index" type="int" /> + <description> + Renders specified glyph the the font cache texture. + </description> + </method> + <method name="render_range"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="start" type="int" /> + <argument index="3" name="end" type="int" /> + <description> + Renders the range of characters to the font cache texture. + </description> + </method> + <method name="set_antialiased"> + <return type="void" /> + <argument index="0" name="antialiased" type="bool" /> + <description> + If set to [code]true[/code], 8-bit antialiased glyph rendering is used, otherwise 1-bit rendering is used. Used by dynamic fonts only. + </description> + </method> + <method name="set_ascent"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="ascent" type="float" /> + <description> + Sets the font ascent (number of pixels above the baseline). + </description> + </method> + <method name="set_data"> + <return type="void" /> + <argument index="0" name="data" type="PackedByteArray" /> + <description> + Sets font source data, e.g contents of the dynamic font source file. + </description> + </method> + <method name="set_descent"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="descent" type="float" /> + <description> + Sets the font descent (number of pixels below the baseline). + </description> + </method> + <method name="set_force_autohinter"> + <return type="void" /> + <argument index="0" name="force_autohinter" type="bool" /> + <description> + If set to [code]true[/code] auto-hinting is preffered over font built-in hinting. + </description> + </method> + <method name="set_glyph_advance"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="advance" type="Vector2" /> + <description> + Sets glyph advance (offset of the next glyph). Note: advance for glyphs outlines is the same as the base glyph advance and is not saved. + </description> + </method> + <method name="set_glyph_offset"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="offset" type="Vector2" /> + <description> + Sets glyph offset from the baseline. + </description> + </method> + <method name="set_glyph_size"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="gl_size" type="Vector2" /> + <description> + Sets glyph size. + </description> + </method> + <method name="set_glyph_texture_idx"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="texture_idx" type="int" /> + <description> + Sets index of the cache texture containing the glyph. + </description> + </method> + <method name="set_glyph_uv_rect"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="uv_rect" type="Rect2" /> + <description> + Sets rectangle in the cache texture containing the glyph. + </description> + </method> + <method name="set_hinting"> + <return type="void" /> + <argument index="0" name="hinting" type="int" enum="TextServer.Hinting" /> + <description> + Sets font hinting mode. Used by dynamic fonts only. + </description> + </method> + <method name="set_kerning"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph_pair" type="Vector2i" /> + <argument index="3" name="kerning" type="Vector2" /> + <description> + Sets kerning for the pair of glyphs. + </description> + </method> <method name="set_language_support_override"> <return type="void" /> <argument index="0" name="language" type="String" /> @@ -263,6 +540,43 @@ Adds override for [method is_language_supported]. </description> </method> + <method name="set_msdf_pixel_range"> + <return type="void" /> + <argument index="0" name="msdf_pixel_range" type="int" /> + <description> + Sets the width of the range around the shape between the minimum and maximum representable signed distance. + </description> + </method> + <method name="set_msdf_size"> + <return type="void" /> + <argument index="0" name="msdf_size" type="int" /> + <description> + Sets source font size used to generate MSDF textures. + </description> + </method> + <method name="set_multichannel_signed_distance_field"> + <return type="void" /> + <argument index="0" name="msdf" type="bool" /> + <description> + If set to [code]true[/code], glyphs of all sizes are rendered using single multichannel signed distance field generated from the dynamic font vector data. + </description> + </method> + <method name="set_oversampling"> + <return type="void" /> + <argument index="0" name="oversampling" type="float" /> + <description> + Sets font oversampling factor, if set to [code]0.0[/code] global oversampling factor is used instead. Used by dynamic fonts only. + </description> + </method> + <method name="set_scale"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="scale" type="float" /> + <description> + Sets scaling factor of the color bitmap font. + </description> + </method> <method name="set_script_support_override"> <return type="void" /> <argument index="0" name="script" type="String" /> @@ -273,52 +587,61 @@ </method> <method name="set_spacing"> <return type="void" /> - <argument index="0" name="type" type="int" /> - <argument index="1" name="value" type="int" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="spacing" type="int" enum="TextServer.SpacingType" /> + <argument index="3" name="arg3" type="int" /> + <description> + Sets extra spacing added between glyphs in pixels. + </description> + </method> + <method name="set_texture_image"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <argument index="3" name="image" type="Image" /> + <description> + Sets font cache texture image. + </description> + </method> + <method name="set_texture_offsets"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <argument index="3" name="offset" type="PackedInt32Array" /> + <description> + Sets array containing the first free pixel in the each column of texture. Should be the same size as texture width or empty (for the fonts without dynamic glyph generation support). + </description> + </method> + <method name="set_underline_position"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="underline_position" type="float" /> + <description> + Sets pixel offset of the underline below the baseline. + </description> + </method> + <method name="set_underline_thickness"> + <return type="void" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="underline_thickness" type="float" /> <description> - Sets the spacing for [code]type[/code] (see [enum SpacingType]) to [code]value[/code] in pixels (not relative to the font size). + Sets thickness of the underline in pixels. </description> </method> - <method name="set_variation"> + <method name="set_variation_coordinates"> <return type="void" /> - <argument index="0" name="tag" type="String" /> - <argument index="1" name="value" type="float" /> + <argument index="0" name="cache_index" type="int" /> + <argument index="1" name="variation_coordinates" type="Dictionary" /> <description> - Sets variation coordinate [code]tag[/code]. + Sets variation coordinates for the specified font cache entry. See [method get_supported_variation_list] for more info. </description> </method> </methods> - <members> - <member name="antialiased" type="bool" setter="set_antialiased" getter="get_antialiased" default="false"> - If [code]true[/code], the font is rendered with anti-aliasing. - </member> - <member name="data_path" type="String" setter="set_data_path" getter="get_data_path" default=""""> - The path to the font data file. If font data was loaded from memory location is set to [code]"(Memory)"[/code]. - </member> - <member name="distance_field_hint" type="bool" setter="set_distance_field_hint" getter="get_distance_field_hint" default="false"> - If [code]true[/code], distance field hint is enabled. - </member> - <member name="extra_spacing_glyph" type="int" setter="set_spacing" getter="get_spacing" default="0"> - Extra spacing for each glyph in pixels. - This can be a negative number to make the distance between glyphs smaller. - </member> - <member name="extra_spacing_space" type="int" setter="set_spacing" getter="get_spacing" default="0"> - Extra spacing for the space character in pixels. - This can be a negative number to make the distance between words smaller. - </member> - <member name="force_autohinter" type="bool" setter="set_force_autohinter" getter="get_force_autohinter" default="false"> - If [code]true[/code], default autohinter is used for font hinting. - </member> - <member name="hinting" type="int" setter="set_hinting" getter="get_hinting" enum="TextServer.Hinting" default="0"> - The font hinting mode used by FreeType. See [enum TextServer.Hinting] for options. - </member> - </members> <constants> - <constant name="SPACING_GLYPH" value="0" enum="SpacingType"> - Spacing for each glyph. - </constant> - <constant name="SPACING_SPACE" value="1" enum="SpacingType"> - Spacing for the space character. - </constant> </constants> </class> diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml index 34c5fb582e..5d79e22c49 100644 --- a/doc/classes/Image.xml +++ b/doc/classes/Image.xml @@ -180,6 +180,7 @@ <argument index="0" name="renormalize" type="bool" default="false" /> <description> Generates mipmaps for the image. Mipmaps are precalculated lower-resolution copies of the image that are automatically used if the image needs to be scaled down when rendered. They help improve image quality and performance when rendering. This method returns an error if the image is compressed, in a custom format, or if the image's width/height is [code]0[/code]. + [b]Note:[/b] Mipmap generation is done on the CPU, is single-threaded and is [i]always[/i] done on the main thread. This means generating mipmaps will result in noticeable stuttering during gameplay, even if [method generate_mipmaps] is called from a [Thread]. </description> </method> <method name="get_data" qualifiers="const"> diff --git a/doc/classes/NativeExtensionManager.xml b/doc/classes/NativeExtensionManager.xml index c14ce94aff..42246619f6 100644 --- a/doc/classes/NativeExtensionManager.xml +++ b/doc/classes/NativeExtensionManager.xml @@ -18,6 +18,12 @@ <description> </description> </method> + <method name="is_extension_loaded" qualifiers="const"> + <return type="bool" /> + <argument index="0" name="path" type="String" /> + <description> + </description> + </method> <method name="load_extension"> <return type="int" enum="NativeExtensionManager.LoadStatus" /> <argument index="0" name="path" type="String" /> diff --git a/doc/classes/PhysicsServer2D.xml b/doc/classes/PhysicsServer2D.xml index 1df2fd0158..d0ae665139 100644 --- a/doc/classes/PhysicsServer2D.xml +++ b/doc/classes/PhysicsServer2D.xml @@ -595,7 +595,8 @@ <argument index="2" name="motion" type="Vector2" /> <argument index="3" name="margin" type="float" default="0.08" /> <argument index="4" name="result" type="PhysicsTestMotionResult2D" default="null" /> - <argument index="5" name="exclude" type="Array" default="[]" /> + <argument index="5" name="collide_separation_ray" type="bool" default="false" /> + <argument index="6" name="exclude" type="Array" default="[]" /> <description> Returns [code]true[/code] if a collision would result from moving in the given direction from a given point in space. Margin increases the size of the shapes involved in the collision detection. [PhysicsTestMotionResult2D] can be passed to return additional information in. </description> @@ -726,6 +727,11 @@ <description> </description> </method> + <method name="separation_ray_shape_create"> + <return type="RID" /> + <description> + </description> + </method> <method name="set_active"> <return type="void" /> <argument index="0" name="active" type="bool" /> @@ -840,25 +846,28 @@ <constant name="SHAPE_WORLD_MARGIN" value="0" enum="ShapeType"> This is the constant for creating world margin shapes. A world margin shape is an [i]infinite[/i] line with an origin point, and a normal. Thus, it can be used for front/behind checks. </constant> - <constant name="SHAPE_SEGMENT" value="1" enum="ShapeType"> + <constant name="SHAPE_SEPARATION_RAY" value="1" enum="ShapeType"> + This is the constant for creating separation ray shapes. A separation ray is defined by a length and separates itself from what is touching its far endpoint. Useful for character controllers. + </constant> + <constant name="SHAPE_SEGMENT" value="2" enum="ShapeType"> This is the constant for creating segment shapes. A segment shape is a [i]finite[/i] line from a point A to a point B. It can be checked for intersections. </constant> - <constant name="SHAPE_CIRCLE" value="2" enum="ShapeType"> + <constant name="SHAPE_CIRCLE" value="3" enum="ShapeType"> This is the constant for creating circle shapes. A circle shape only has a radius. It can be used for intersections and inside/outside checks. </constant> - <constant name="SHAPE_RECTANGLE" value="3" enum="ShapeType"> + <constant name="SHAPE_RECTANGLE" value="4" enum="ShapeType"> This is the constant for creating rectangle shapes. A rectangle shape is defined by a width and a height. It can be used for intersections and inside/outside checks. </constant> - <constant name="SHAPE_CAPSULE" value="4" enum="ShapeType"> + <constant name="SHAPE_CAPSULE" value="5" enum="ShapeType"> This is the constant for creating capsule shapes. A capsule shape is defined by a radius and a length. It can be used for intersections and inside/outside checks. </constant> - <constant name="SHAPE_CONVEX_POLYGON" value="5" enum="ShapeType"> + <constant name="SHAPE_CONVEX_POLYGON" value="6" enum="ShapeType"> This is the constant for creating convex polygon shapes. A polygon is defined by a list of points. It can be used for intersections and inside/outside checks. Unlike the [member CollisionPolygon2D.polygon] property, polygons modified with [method shape_set_data] do not verify that the points supplied form is a convex polygon. </constant> - <constant name="SHAPE_CONCAVE_POLYGON" value="6" enum="ShapeType"> + <constant name="SHAPE_CONCAVE_POLYGON" value="7" enum="ShapeType"> This is the constant for creating concave polygon shapes. A polygon is defined by a list of points. It can be used for intersections checks, but not for inside/outside checks. </constant> - <constant name="SHAPE_CUSTOM" value="7" enum="ShapeType"> + <constant name="SHAPE_CUSTOM" value="8" enum="ShapeType"> This constant is used internally by the engine. Any attempt to create this kind of shape results in an error. </constant> <constant name="AREA_PARAM_GRAVITY" value="0" enum="AreaParameter"> diff --git a/doc/classes/PhysicsServer3D.xml b/doc/classes/PhysicsServer3D.xml index 33eb0de698..c47a311161 100644 --- a/doc/classes/PhysicsServer3D.xml +++ b/doc/classes/PhysicsServer3D.xml @@ -571,7 +571,8 @@ <argument index="2" name="motion" type="Vector3" /> <argument index="3" name="margin" type="float" default="0.001" /> <argument index="4" name="result" type="PhysicsTestMotionResult3D" default="null" /> - <argument index="5" name="exclude" type="Array" default="[]" /> + <argument index="5" name="collide_separation_ray" type="bool" default="false" /> + <argument index="6" name="exclude" type="Array" default="[]" /> <description> Returns [code]true[/code] if a collision would result from moving in the given direction from a given point in space. Margin increases the size of the shapes involved in the collision detection. [PhysicsTestMotionResult3D] can be passed to return additional information in. </description> @@ -849,6 +850,11 @@ <description> </description> </method> + <method name="separation_ray_shape_create"> + <return type="RID" /> + <description> + </description> + </method> <method name="set_active"> <return type="void" /> <argument index="0" name="active" type="bool" /> @@ -1171,31 +1177,34 @@ <constant name="SHAPE_PLANE" value="0" enum="ShapeType"> The [Shape3D] is a [WorldMarginShape3D]. </constant> - <constant name="SHAPE_SPHERE" value="1" enum="ShapeType"> + <constant name="SHAPE_SEPARATION_RAY" value="1" enum="ShapeType"> + The [Shape3D] is a [SeparationRayShape3D]. + </constant> + <constant name="SHAPE_SPHERE" value="2" enum="ShapeType"> The [Shape3D] is a [SphereShape3D]. </constant> - <constant name="SHAPE_BOX" value="2" enum="ShapeType"> + <constant name="SHAPE_BOX" value="3" enum="ShapeType"> The [Shape3D] is a [BoxShape3D]. </constant> - <constant name="SHAPE_CAPSULE" value="3" enum="ShapeType"> + <constant name="SHAPE_CAPSULE" value="4" enum="ShapeType"> The [Shape3D] is a [CapsuleShape3D]. </constant> - <constant name="SHAPE_CYLINDER" value="4" enum="ShapeType"> + <constant name="SHAPE_CYLINDER" value="5" enum="ShapeType"> The [Shape3D] is a [CylinderShape3D]. </constant> - <constant name="SHAPE_CONVEX_POLYGON" value="5" enum="ShapeType"> + <constant name="SHAPE_CONVEX_POLYGON" value="6" enum="ShapeType"> The [Shape3D] is a [ConvexPolygonShape3D]. </constant> - <constant name="SHAPE_CONCAVE_POLYGON" value="6" enum="ShapeType"> + <constant name="SHAPE_CONCAVE_POLYGON" value="7" enum="ShapeType"> The [Shape3D] is a [ConcavePolygonShape3D]. </constant> - <constant name="SHAPE_HEIGHTMAP" value="7" enum="ShapeType"> + <constant name="SHAPE_HEIGHTMAP" value="8" enum="ShapeType"> The [Shape3D] is a [HeightMapShape3D]. </constant> - <constant name="SHAPE_SOFT_BODY" value="8" enum="ShapeType"> + <constant name="SHAPE_SOFT_BODY" value="9" enum="ShapeType"> The [Shape3D] is a [SoftBody3D]. </constant> - <constant name="SHAPE_CUSTOM" value="9" enum="ShapeType"> + <constant name="SHAPE_CUSTOM" value="10" enum="ShapeType"> This constant is used internally by the engine. Any attempt to create this kind of shape results in an error. </constant> <constant name="AREA_PARAM_GRAVITY" value="0" enum="AreaParameter"> diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index 0d1fa0e70f..58c9d9e44b 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -1473,6 +1473,9 @@ </member> <member name="rendering/2d/snap/snap_2d_vertices_to_pixel" type="bool" setter="" getter="" default="false"> </member> + <member name="rendering/3d/viewport/scale" type="int" setter="" getter="" default="0"> + Scale the 3D render buffer based on the viewport size. The smaller the faster 3D rendering is performed but at the cost of quality. + </member> <member name="rendering/anti_aliasing/quality/msaa" type="int" setter="" getter="" default="0"> Sets the number of MSAA samples to use (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. </member> diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml index df8bfb7e34..638c657492 100644 --- a/doc/classes/RenderingServer.xml +++ b/doc/classes/RenderingServer.xml @@ -3082,6 +3082,14 @@ If [code]true[/code], render the contents of the viewport directly to screen. This allows a low-level optimization where you can skip drawing a viewport to the root viewport. While this optimization can result in a significant increase in speed (especially on older devices), it comes at a cost of usability. When this is enabled, you cannot read from the viewport or from the [code]SCREEN_TEXTURE[/code]. You also lose the benefit of certain window settings, such as the various stretch modes. Another consequence to be aware of is that in 2D the rendering happens in window coordinates, so if you have a viewport that is double the size of the window, and you set this, then only the portion that fits within the window will be drawn, no automatic scaling is possible, even if your game scene is significantly larger than the window size. </description> </method> + <method name="viewport_set_scale_3d"> + <return type="void" /> + <argument index="0" name="viewport" type="RID" /> + <argument index="1" name="scale" type="int" enum="RenderingServer.ViewportScale3D" /> + <description> + Sets the scale at which we render 3D contents. + </description> + </method> <method name="viewport_set_scenario"> <return type="void" /> <argument index="0" name="viewport" type="RID" /> @@ -3896,6 +3904,16 @@ </constant> <constant name="VIEWPORT_DEBUG_DRAW_OCCLUDERS" value="23" enum="ViewportDebugDraw"> </constant> + <constant name="VIEWPORT_SCALE_3D_DISABLED" value="0" enum="ViewportScale3D"> + </constant> + <constant name="VIEWPORT_SCALE_3D_75_PERCENT" value="1" enum="ViewportScale3D"> + </constant> + <constant name="VIEWPORT_SCALE_3D_50_PERCENT" value="2" enum="ViewportScale3D"> + </constant> + <constant name="VIEWPORT_SCALE_3D_33_PERCENT" value="3" enum="ViewportScale3D"> + </constant> + <constant name="VIEWPORT_SCALE_3D_25_PERCENT" value="4" enum="ViewportScale3D"> + </constant> <constant name="SKY_MODE_AUTOMATIC" value="0" enum="SkyMode"> </constant> <constant name="SKY_MODE_QUALITY" value="1" enum="SkyMode"> diff --git a/doc/classes/SeparationRayShape2D.xml b/doc/classes/SeparationRayShape2D.xml new file mode 100644 index 0000000000..fb90606577 --- /dev/null +++ b/doc/classes/SeparationRayShape2D.xml @@ -0,0 +1,24 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SeparationRayShape2D" inherits="Shape2D" version="4.0"> + <brief_description> + Separation ray shape for 2D collisions. + </brief_description> + <description> + Separation ray shape for 2D collisions. A ray is not really a collision body; instead, it tries to separate itself from whatever is touching its far endpoint. It's often useful for characters. + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="length" type="float" setter="set_length" getter="get_length" default="20.0"> + The ray's length. + </member> + <member name="slide_on_slope" type="bool" setter="set_slide_on_slope" getter="get_slide_on_slope" default="false"> + If [code]false[/code] (default), the shape always separates and returns a normal along its own direction. + If [code]true[/code], the shape can return the correct normal and separate in any direction, allowing sliding motion on slopes. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/SeparationRayShape3D.xml b/doc/classes/SeparationRayShape3D.xml new file mode 100644 index 0000000000..ea57e4eb59 --- /dev/null +++ b/doc/classes/SeparationRayShape3D.xml @@ -0,0 +1,24 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="SeparationRayShape3D" inherits="Shape3D" version="4.0"> + <brief_description> + Separation ray shape for 3D collisions. + </brief_description> + <description> + Separation ray shape for 3D collisions, which can be set into a [PhysicsBody3D] or [Area3D]. A ray is not really a collision body; instead, it tries to separate itself from whatever is touching its far endpoint. It's often useful for characters. + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <members> + <member name="length" type="float" setter="set_length" getter="get_length" default="1.0"> + The ray's length. + </member> + <member name="slide_on_slope" type="bool" setter="set_slide_on_slope" getter="get_slide_on_slope" default="false"> + If [code]false[/code] (default), the shape always separates and returns a normal along its own direction. + If [code]true[/code], the shape can return the correct normal and separate in any direction, allowing sliding motion on slopes. + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/Skeleton2D.xml b/doc/classes/Skeleton2D.xml index 828d24338b..839193fb61 100644 --- a/doc/classes/Skeleton2D.xml +++ b/doc/classes/Skeleton2D.xml @@ -5,6 +5,7 @@ </brief_description> <description> Skeleton2D parents a hierarchy of [Bone2D] objects. It is a requirement of [Bone2D]. Skeleton2D holds a reference to the rest pose of its children and acts as a single point of access to its bones. + To setup different types of inverse kinematics for the given Skeleton2D, a [SkeletonModificationStack2D] should be created. They can be applied by creating the desired number of modifications, which can be done by increasing [member SkeletonModificationStack2D.modification_count]. </description> <tutorials> <link title="2D skeletons">https://docs.godotengine.org/en/latest/tutorials/animation/2d_skeletons.html</link> diff --git a/doc/classes/SkeletonModification3DJiggle.xml b/doc/classes/SkeletonModification3DJiggle.xml index e48e382cd4..6cc1c0b266 100644 --- a/doc/classes/SkeletonModification3DJiggle.xml +++ b/doc/classes/SkeletonModification3DJiggle.xml @@ -175,19 +175,19 @@ </methods> <members> <member name="damping" type="float" setter="set_damping" getter="get_damping" default="0.75"> - The default amount of dampening applied to the Jiggle joints, if they are not overriden. Higher values lead to more of the calculated velocity being applied. + The default amount of dampening applied to the Jiggle joints, if they are not overridden. Higher values lead to more of the calculated velocity being applied. </member> <member name="gravity" type="Vector3" setter="set_gravity" getter="get_gravity" default="Vector3(0, -6, 0)"> - The default amount of gravity applied to the Jiggle joints, if they are not overriden. + The default amount of gravity applied to the Jiggle joints, if they are not overridden. </member> <member name="jiggle_data_chain_length" type="int" setter="set_jiggle_data_chain_length" getter="get_jiggle_data_chain_length" default="0"> The amount of Jiggle joints in the Jiggle modification. </member> <member name="mass" type="float" setter="set_mass" getter="get_mass" default="0.75"> - The default amount of mass assigned to the Jiggle joints, if they are not overriden. Higher values lead to faster movements and more overshooting. + The default amount of mass assigned to the Jiggle joints, if they are not overridden. Higher values lead to faster movements and more overshooting. </member> <member name="stiffness" type="float" setter="set_stiffness" getter="get_stiffness" default="3.0"> - The default amount of stiffness assigned to the Jiggle joints, if they are not overriden. Higher values act more like springs, quickly moving into the correct position. + The default amount of stiffness assigned to the Jiggle joints, if they are not overridden. Higher values act more like springs, quickly moving into the correct position. </member> <member name="target_nodepath" type="NodePath" setter="set_target_node" getter="get_target_node" default="NodePath("")"> The NodePath to the node that is the target for the Jiggle modification. This node is what the Jiggle chain will attempt to rotate the bone chain to. diff --git a/doc/classes/TextParagraph.xml b/doc/classes/TextParagraph.xml index fb94e14c8d..aa35acdbd2 100644 --- a/doc/classes/TextParagraph.xml +++ b/doc/classes/TextParagraph.xml @@ -220,13 +220,13 @@ <method name="get_spacing_bottom" qualifiers="const"> <return type="int" /> <description> - Returns extra spacing at the bottom of the line. See [member Font.extra_spacing_bottom]. + Returns extra spacing at the bottom of the line. See [member Font.spacing_bottom]. </description> </method> <method name="get_spacing_top" qualifiers="const"> <return type="int" /> <description> - Returns extra spacing at the top of the line. See [member Font.extra_spacing_top]. + Returns extra spacing at the top of the line. See [member Font.spacing_top]. </description> </method> <method name="hit_test" qualifiers="const"> diff --git a/doc/classes/TextServer.xml b/doc/classes/TextServer.xml index ac56be4392..b32168ebc5 100644 --- a/doc/classes/TextServer.xml +++ b/doc/classes/TextServer.xml @@ -9,42 +9,10 @@ <tutorials> </tutorials> <methods> - <method name="create_font_bitmap"> + <method name="create_font"> <return type="RID" /> - <argument index="0" name="height" type="float" /> - <argument index="1" name="ascent" type="float" /> - <argument index="2" name="base_size" type="int" /> <description> - Creates new, empty bitmap font. To free the resulting font, use [method free_rid] method. - </description> - </method> - <method name="create_font_memory"> - <return type="RID" /> - <argument index="0" name="data" type="PackedByteArray" /> - <argument index="1" name="type" type="String" /> - <argument index="2" name="base_size" type="int" default="16" /> - <description> - Creates new font from the data in memory. To free the resulting font, use [method free_rid] method. - Note: For non-scalable fonts [code]base_size[/code] is ignored, use [method font_get_base_size] to check actual font size. - </description> - </method> - <method name="create_font_resource"> - <return type="RID" /> - <argument index="0" name="filename" type="String" /> - <argument index="1" name="base_size" type="int" default="16" /> - <description> - Creates new font from the file. To free the resulting font, use [method free_rid] method. - Note: For non-scalable fonts [code]base_size[/code] is ignored, use [method font_get_base_size] to check actual font size. - </description> - </method> - <method name="create_font_system"> - <return type="RID" /> - <argument index="0" name="name" type="String" /> - <argument index="1" name="base_size" type="int" default="16" /> - <description> - Creates new font from the system font. To free the resulting font, use [method free_rid] method. - Note: This method is supported by servers with the [code]FEATURE_FONT_SYSTEM[/code] feature. - Note: For non-scalable fonts [code]base_size[/code] is ignored, use [method font_get_base_size] to check actual font size. + Creates new, empty font cache entry resource. To free the resulting resourec, use [method free_rid] method. </description> </method> <method name="create_shaped_text"> @@ -68,52 +36,53 @@ Draws box displaying character hexadecimal code. Used for replacing missing characters. </description> </method> - <method name="font_bitmap_add_char"> + <method name="font_clear_glyphs"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="char" type="int" /> - <argument index="2" name="texture_idx" type="int" /> - <argument index="3" name="rect" type="Rect2" /> - <argument index="4" name="align" type="Vector2" /> - <argument index="5" name="advance" type="float" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> <description> - Adds a character to the font, where [code]character[/code] is the Unicode value, [code]texture[/code] is the texture index, [code]rect[/code] is the region in the texture (in pixels!), [code]align[/code] is the (optional) alignment for the character and [code]advance[/code] is the (optional) advance. + Removes all rendered glyphs information from the cache entry. Note: This function will not remove textures associated with the glyphs, use [method font_remove_texture] to remove them manually. </description> </method> - <method name="font_bitmap_add_kerning_pair"> + <method name="font_clear_kerning_map"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="A" type="int" /> - <argument index="2" name="B" type="int" /> - <argument index="3" name="kerning" type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> <description> - Adds a kerning pair to the bitmap font as a difference. Kerning pairs are special cases where a typeface advance is determined by the next character. + Removes all kerning overrides. </description> </method> - <method name="font_bitmap_add_texture"> + <method name="font_clear_size_cache"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="texture" type="Texture" /> + <argument index="0" name="font_rid" type="RID" /> + <description> + Removes all font sizes from the cache entry + </description> + </method> + <method name="font_clear_textures"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> <description> - Adds a texture to the bitmap font. + Removes all textures from font cache entry. Note: This function will not remove glyphs associated with the texture, use [method font_remove_glyph] to remove them manually. </description> </method> <method name="font_draw_glyph" qualifiers="const"> - <return type="Vector2" /> - <argument index="0" name="font" type="RID" /> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="canvas" type="RID" /> <argument index="2" name="size" type="int" /> <argument index="3" name="pos" type="Vector2" /> <argument index="4" name="index" type="int" /> <argument index="5" name="color" type="Color" default="Color(1, 1, 1, 1)" /> <description> - Draws single glyph into a canvas item at the position, using [code]font[/code] at the size [code]size[/code]. + Draws single glyph into a canvas item at the position, using [code]font_rid[/code] at the size [code]size[/code]. Note: Glyph index is specific to the font, use glyphs indices returned by [method shaped_text_get_glyphs] or [method font_get_glyph_index]. </description> </method> <method name="font_draw_glyph_outline" qualifiers="const"> - <return type="Vector2" /> - <argument index="0" name="font" type="RID" /> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="canvas" type="RID" /> <argument index="2" name="size" type="int" /> <argument index="3" name="outline_size" type="int" /> @@ -121,68 +90,46 @@ <argument index="5" name="index" type="int" /> <argument index="6" name="color" type="Color" default="Color(1, 1, 1, 1)" /> <description> - Draws single glyph outline of size [code]outline_size[/code] into a canvas item at the position, using [code]font[/code] at the size [code]size[/code]. + Draws single glyph outline of size [code]outline_size[/code] into a canvas item at the position, using [code]font_rid[/code] at the size [code]size[/code]. Note: Glyph index is specific to the font, use glyphs indices returned by [method shaped_text_get_glyphs] or [method font_get_glyph_index]. </description> </method> - <method name="font_get_antialiased" qualifiers="const"> - <return type="bool" /> - <argument index="0" name="font" type="RID" /> - <description> - Returns [code]true[/code], if font anti-aliasing is supported and enabled. - </description> - </method> <method name="font_get_ascent" qualifiers="const"> <return type="float" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="size" type="int" /> <description> Returns the font ascent (number of pixels above the baseline). </description> </method> - <method name="font_get_base_size" qualifiers="const"> - <return type="float" /> - <argument index="0" name="font" type="RID" /> - <description> - Returns the default size of the font. - </description> - </method> <method name="font_get_descent" qualifiers="const"> <return type="float" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="size" type="int" /> <description> Returns the font descent (number of pixels below the baseline). </description> </method> - <method name="font_get_distance_field_hint" qualifiers="const"> - <return type="bool" /> - <argument index="0" name="font" type="RID" /> - <description> - Returns [code]true[/code], if distance field hint is enabled. - </description> - </method> - <method name="font_get_feature_list" qualifiers="const"> - <return type="Dictionary" /> - <argument index="0" name="font" type="RID" /> + <method name="font_get_fixed_size" qualifiers="const"> + <return type="int" /> + <argument index="0" name="font_rid" type="RID" /> <description> - Returns list of OpenType features supported by font. + Returns bitmap font fixed size. </description> </method> - <method name="font_get_force_autohinter" qualifiers="const"> - <return type="bool" /> - <argument index="0" name="font" type="RID" /> + <method name="font_get_global_oversampling" qualifiers="const"> + <return type="float" /> <description> - Returns [code]true[/code], if autohinter is supported and enabled. + Returns the font oversampling factor, shared by all fonts in the TextServer. </description> </method> <method name="font_get_glyph_advance" qualifiers="const"> <return type="Vector2" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="index" type="int" /> - <argument index="2" name="size" type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph" type="int" /> <description> - Returns advance of the glyph. + Returns glyph advance (offset of the next glyph). Note: advance for glyphs outlines is the same as the base glyph advance and is not saved. </description> </method> <method name="font_get_glyph_contours" qualifiers="const"> @@ -191,7 +138,7 @@ <argument index="1" name="size" type="int" /> <argument index="2" name="index" type="int" /> <description> - Returns outline contours of the glyph in a Dictionary. + Returns outline contours of the glyph as a [code]Dictionary[/code] with the following contents: [code]points[/code] - [PackedVector3Array], containing outline points. [code]x[/code] and [code]y[/code] are point coordinates. [code]z[/code] is the type of the point, using the [enum ContourPointTag] values. [code]contours[/code] - [PackedInt32Array], containing indices the end points of each contour. [code]orientation[/code] - [bool], contour orientation. If [code]true[/code], clockwise contours must be filled. @@ -199,41 +146,85 @@ </method> <method name="font_get_glyph_index" qualifiers="const"> <return type="int" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="char" type="int" /> - <argument index="2" name="variation_selector" type="int" default="0" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="char" type="int" /> + <argument index="3" name="variation_selector" type="int" /> <description> Returns the glyph index of a [code]char[/code], optionally modified by the [code]variation_selector[/code]. </description> </method> - <method name="font_get_glyph_kerning" qualifiers="const"> + <method name="font_get_glyph_list" qualifiers="const"> + <return type="Array" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <description> + Returns list of rendered glyphs in the cache entry. + </description> + </method> + <method name="font_get_glyph_offset" qualifiers="const"> <return type="Vector2" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="index_a" type="int" /> - <argument index="2" name="index_b" type="int" /> - <argument index="3" name="size" type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> <description> - Returns a kerning of the pair of glyphs. + Returns glyph offset from the baseline. </description> </method> - <method name="font_get_height" qualifiers="const"> - <return type="float" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="size" type="int" /> + <method name="font_get_glyph_size" qualifiers="const"> + <return type="Vector2" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> <description> - Returns the total font height (ascent plus descent) in pixels. + Returns size of the glyph. + </description> + </method> + <method name="font_get_glyph_texture_idx" qualifiers="const"> + <return type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <description> + Returns index of the cache texture containing the glyph. + </description> + </method> + <method name="font_get_glyph_uv_rect" qualifiers="const"> + <return type="Rect2" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <description> + Returns rectangle in the cache texture containing the glyph. </description> </method> <method name="font_get_hinting" qualifiers="const"> <return type="int" enum="TextServer.Hinting" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <description> - Returns the font hinting. + Returns the font hinting mode. Used by dynamic fonts only. + </description> + </method> + <method name="font_get_kerning" qualifiers="const"> + <return type="Vector2" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph_pair" type="Vector2i" /> + <description> + Returns kerning for the pair of glyphs. + </description> + </method> + <method name="font_get_kerning_list" qualifiers="const"> + <return type="Array" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <description> + Returns list of the kerning overrides. </description> </method> <method name="font_get_language_support_override"> <return type="bool" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="language" type="String" /> <description> Returns [code]true[/code] if support override is enabled for the [code]language[/code]. @@ -241,20 +232,43 @@ </method> <method name="font_get_language_support_overrides"> <return type="PackedStringArray" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <description> Returns list of language support overrides. </description> </method> + <method name="font_get_msdf_pixel_range" qualifiers="const"> + <return type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <description> + Return the width of the range around the shape between the minimum and maximum representable signed distance. + </description> + </method> + <method name="font_get_msdf_size" qualifiers="const"> + <return type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <description> + Returns source font size used to generate MSDF textures. + </description> + </method> <method name="font_get_oversampling" qualifiers="const"> <return type="float" /> + <argument index="0" name="font_rid" type="RID" /> <description> - Returns the font oversampling factor, shared by all fonts in the TextServer. + Returns font oversampling factor, if set to [code]0.0[/code] global oversampling factor is used instead. Used by dynamic fonts only. + </description> + </method> + <method name="font_get_scale" qualifiers="const"> + <return type="float" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <description> + Returns scaling factor of the color bitmap font. </description> </method> <method name="font_get_script_support_override"> <return type="bool" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="script" type="String" /> <description> Returns [code]true[/code] if support override is enabled for the [code]script[/code]. @@ -262,98 +276,149 @@ </method> <method name="font_get_script_support_overrides"> <return type="PackedStringArray" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <description> Returns list of script support overrides. </description> </method> - <method name="font_get_spacing_glyph" qualifiers="const"> - <return type="int" /> - <argument index="0" name="font" type="RID" /> + <method name="font_get_size_cache_list" qualifiers="const"> + <return type="Array" /> + <argument index="0" name="font_rid" type="RID" /> <description> - Returns extra spacing for each glyph in pixels. + Return list of the font sizes in the cache. Each size is [code]Vector2i[/code] with font size and outline size. </description> </method> - <method name="font_get_spacing_space" qualifiers="const"> + <method name="font_get_spacing" qualifiers="const"> <return type="int" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="spacing" type="int" enum="TextServer.SpacingType" /> <description> - Sets extra spacing for each glyph in pixels. + Returns extra spacing added between glyphs in pixels. </description> </method> <method name="font_get_supported_chars" qualifiers="const"> <return type="String" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <description> Returns a string containing all the characters available in the font. </description> </method> - <method name="font_get_underline_position" qualifiers="const"> - <return type="float" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="size" type="int" /> + <method name="font_get_texture_count" qualifiers="const"> + <return type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> <description> - Returns underline offset (number of pixels below the baseline). + Returns number of textures used by font cache entry. </description> </method> - <method name="font_get_underline_thickness" qualifiers="const"> + <method name="font_get_texture_image" qualifiers="const"> + <return type="Image" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <description> + Returns font cache texture image data. + </description> + </method> + <method name="font_get_texture_offsets" qualifiers="const"> + <return type="PackedInt32Array" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <description> + Returns array containing the first free pixel in the each column of texture. Should be the same size as texture width or empty. + </description> + </method> + <method name="font_get_underline_position" qualifiers="const"> <return type="float" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="size" type="int" /> <description> - Returns underline thickness in pixels. + Returns pixel offset of the underline below the baseline. </description> </method> - <method name="font_get_variation" qualifiers="const"> + <method name="font_get_underline_thickness" qualifiers="const"> <return type="float" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="tag" type="String" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> <description> - Returns variation coordinate [code]tag[/code]. + Returns thickness of the underline in pixels. </description> </method> - <method name="font_get_variation_list" qualifiers="const"> + <method name="font_get_variation_coordinates" qualifiers="const"> <return type="Dictionary" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <description> - Returns list of supported [url=https://docs.microsoft.com/en-us/typography/opentype/spec/dvaraxisreg]variation coordinates[/url], each coordinate is returned as [code]tag: Vector3i(min_value,max_value,default_value)[/code]. - Font variations allow for continuous change of glyph characteristics along some given design axis, such as weight, width or slant. + Returns variation coordinates for the specified font cache entry. See [method font_supported_variation_list] for more info. </description> </method> <method name="font_has_char" qualifiers="const"> <return type="bool" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="char" type="int" /> <description> - Returns [code]true[/code] if [code]char[/code] is available in the font. + Return [code]true[/code] if a Unicode [code]char[/code] is available in the font. </description> </method> - <method name="font_has_outline" qualifiers="const"> + <method name="font_is_antialiased" qualifiers="const"> <return type="bool" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> + <description> + Returns [code]true[/code] if font 8-bit anitialiased glyph rendering is supported and enabled. + </description> + </method> + <method name="font_is_force_autohinter" qualifiers="const"> + <return type="bool" /> + <argument index="0" name="font_rid" type="RID" /> <description> - Returns [code]true[/code], if font supports glyph outlines. + Returns [code]true[/code] if auto-hinting is supported and preffered over font built-in hinting. Used by dynamic fonts only. </description> </method> <method name="font_is_language_supported" qualifiers="const"> <return type="bool" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="language" type="String" /> <description> - Returns [code]true[/code], if font supports given language (ISO 639 code). + Returns [code]true[/code], if font supports given language ([url=https://en.wikipedia.org/wiki/ISO_639-1]ISO 639[/url] code). + </description> + </method> + <method name="font_is_multichannel_signed_distance_field" qualifiers="const"> + <return type="bool" /> + <argument index="0" name="font_rid" type="RID" /> + <description> + Returns [code]true[/code] if glyphs of all sizes are rendered using single multichannel signed distance field generated from the dynamic font vector data. </description> </method> <method name="font_is_script_supported" qualifiers="const"> <return type="bool" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="script" type="String" /> <description> Returns [code]true[/code], if font supports given script (ISO 15924 code). </description> </method> + <method name="font_remove_glyph"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <description> + Removes specified rendered glyph information from the cache entry. Note: This function will not remove textures associated with the glyphs, use [method font_remove_texture] to remove them manually. + </description> + </method> + <method name="font_remove_kerning"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph_pair" type="Vector2i" /> + <description> + Removes kerning override for the pair of glyphs. + </description> + </method> <method name="font_remove_language_support_override"> <return type="void" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="language" type="String" /> <description> Remove language support override. @@ -361,92 +426,299 @@ </method> <method name="font_remove_script_support_override"> <return type="void" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="script" type="String" /> <description> Removes script support override. </description> </method> + <method name="font_remove_size_cache"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <description> + Removes specified font size from the cache entry. + </description> + </method> + <method name="font_remove_texture"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <description> + Removes specified texture from font cache entry. Note: This function will not remove glyphs associated with the texture, remove them manually, using [method font_remove_glyph]. + </description> + </method> + <method name="font_render_glyph"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="index" type="int" /> + <description> + Renders specified glyph the the font cache texture. + </description> + </method> + <method name="font_render_range"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="start" type="int" /> + <argument index="3" name="end" type="int" /> + <description> + Renders the range of characters to the font cache texture. + </description> + </method> <method name="font_set_antialiased"> <return type="void" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="antialiased" type="bool" /> <description> - Sets font anti-aliasing. + If set to [code]true[/code], 8-bit antialiased glyph rendering is used, otherwise 1-bit rendering is used. Used by dynamic fonts only. </description> </method> - <method name="font_set_distance_field_hint"> + <method name="font_set_ascent"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="distance_field" type="bool" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="ascent" type="float" /> + <description> + Sets the font ascent (number of pixels above the baseline). + </description> + </method> + <method name="font_set_data"> + <return type="void" /> + <argument index="0" name="data" type="RID" /> + <argument index="1" name="arg1" type="PackedByteArray" /> <description> - Sets font distance field hint. + Sets font source data, e.g contents of the dynamic font source file. + </description> + </method> + <method name="font_set_descent"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="descent" type="float" /> + <description> + Sets the font descent (number of pixels below the baseline). + </description> + </method> + <method name="font_set_fixed_size"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="fixed_size" type="int" /> + <description> + Sets bitmap font fixed size. If set to value greater than zero, same cache entry will be used for all font sizes. </description> </method> <method name="font_set_force_autohinter"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="enabeld" type="bool" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="force_autohinter" type="bool" /> + <description> + If set to [code]true[/code] auto-hinting is preffered over font built-in hinting. + </description> + </method> + <method name="font_set_global_oversampling"> + <return type="void" /> + <argument index="0" name="oversampling" type="float" /> + <description> + Sets oversampling factor, shared by all font in the TextServer. + Note: This value can be automaticaly changed by display server. + </description> + </method> + <method name="font_set_glyph_advance"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="advance" type="Vector2" /> + <description> + Sets glyph advance (offset of the next glyph). Note: advance for glyphs outlines is the same as the base glyph advance and is not saved. + </description> + </method> + <method name="font_set_glyph_offset"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="offset" type="Vector2" /> + <description> + Sets glyph offset from the baseline. + </description> + </method> + <method name="font_set_glyph_size"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="size" type="Vector2" /> <description> - Enables/disables default autohinter. + Sets size of the glyph. + </description> + </method> + <method name="font_set_glyph_texture_idx"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="texture_idx" type="int" /> + <description> + Sets index of the cache texture containing the glyph. + </description> + </method> + <method name="font_set_glyph_uv_rect"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="glyph" type="int" /> + <argument index="3" name="uv_rect" type="Rect2" /> + <description> + Sets rectangle in the cache texture containing the glyph. </description> </method> <method name="font_set_hinting"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="hinting" type="int" enum="TextServer.Hinting" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="_hinting" type="int" enum="TextServer.Hinting" /> <description> - Sets font hinting. + Sets font hinting mode. Used by dynamic fonts only. + </description> + </method> + <method name="font_set_kerning"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="glyph_pair" type="Vector2i" /> + <argument index="3" name="kerning" type="Vector2" /> + <description> + Sets kerning for the pair of glyphs. </description> </method> <method name="font_set_language_support_override"> <return type="void" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="language" type="String" /> <argument index="2" name="supported" type="bool" /> <description> Adds override for [method font_is_language_supported]. </description> </method> + <method name="font_set_msdf_pixel_range"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="msdf_pixel_range" type="int" /> + <description> + Sets the width of the range around the shape between the minimum and maximum representable signed distance. + </description> + </method> + <method name="font_set_msdf_size"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="msdf_size" type="int" /> + <description> + Sets source font size used to generate MSDF textures. + </description> + </method> + <method name="font_set_multichannel_signed_distance_field"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="msdf" type="bool" /> + <description> + If set to [code]true[/code], glyphs of all sizes are rendered using single multichannel signed distance field generated from the dynamic font vector data. + </description> + </method> <method name="font_set_oversampling"> <return type="void" /> - <argument index="0" name="oversampling" type="float" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="oversampling" type="float" /> <description> - Sets oversampling factor, shared by all font in the TextServer. + Sets font oversampling factor, if set to [code]0.0[/code] global oversampling factor is used instead. Used by dynamic fonts only. + </description> + </method> + <method name="font_set_scale"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="scale" type="float" /> + <description> + Sets scaling factor of the color bitmap font. </description> </method> <method name="font_set_script_support_override"> <return type="void" /> - <argument index="0" name="font" type="RID" /> + <argument index="0" name="font_rid" type="RID" /> <argument index="1" name="script" type="String" /> <argument index="2" name="supported" type="bool" /> <description> Adds override for [method font_is_script_supported]. </description> </method> - <method name="font_set_spacing_glyph"> + <method name="font_set_spacing"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="value" type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="spacing" type="int" enum="TextServer.SpacingType" /> + <argument index="3" name="value" type="int" /> <description> - Returns extra spacing for the space character in pixels. + Sets extra spacing added between glyphs in pixels. </description> </method> - <method name="font_set_spacing_space"> + <method name="font_set_texture_image"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="value" type="int" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <argument index="3" name="image" type="Image" /> <description> - Sets extra spacing for the space character in pixels. + Sets font cache texture image data. </description> </method> - <method name="font_set_variation"> + <method name="font_set_texture_offsets"> <return type="void" /> - <argument index="0" name="font" type="RID" /> - <argument index="1" name="tag" type="String" /> - <argument index="2" name="value" type="float" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="Vector2i" /> + <argument index="2" name="texture_index" type="int" /> + <argument index="3" name="offset" type="PackedInt32Array" /> + <description> + Sets array containing the first free pixel in the each column of texture. Should be the same size as texture width or empty. + </description> + </method> + <method name="font_set_underline_position"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="underline_position" type="float" /> + <description> + Sets pixel offset of the underline below the baseline. + </description> + </method> + <method name="font_set_underline_thickness"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="size" type="int" /> + <argument index="2" name="underline_thickness" type="float" /> + <description> + Sets thickness of the underline in pixels. + </description> + </method> + <method name="font_set_variation_coordinates"> + <return type="void" /> + <argument index="0" name="font_rid" type="RID" /> + <argument index="1" name="variation_coordinates" type="Dictionary" /> + <description> + Sets variation coordinates for the specified font cache entry. See [method font_supported_variation_list] for more info. + </description> + </method> + <method name="font_supported_feature_list" qualifiers="const"> + <return type="Dictionary" /> + <argument index="0" name="font_rid" type="RID" /> + <description> + </description> + </method> + <method name="font_supported_variation_list" qualifiers="const"> + <return type="Dictionary" /> + <argument index="0" name="font_rid" type="RID" /> <description> - Sets variation coordinate [code]name[/code]. Unsupported coordinates will be silently ignored. </description> </method> <method name="format_number" qualifiers="const"> @@ -478,13 +750,6 @@ Returns the name of the server interface. </description> </method> - <method name="get_system_fonts" qualifiers="const"> - <return type="PackedStringArray" /> - <description> - Returns list of available system fonts. - Note: This method is supported by servers with the [code]FEATURE_FONT_SYSTEM[/code] feature. - </description> - </method> <method name="has"> <return type="bool" /> <argument index="0" name="rid" type="RID" /> @@ -514,7 +779,7 @@ Note: This function should be called before any other TextServer functions used, otherwise it won't have any effect. </description> </method> - <method name="name_to_tag"> + <method name="name_to_tag" qualifiers="const"> <return type="int" /> <argument index="0" name="name" type="String" /> <description> @@ -890,7 +1155,7 @@ Aligns shaped text to the given tab-stops. </description> </method> - <method name="tag_to_name"> + <method name="tag_to_name" qualifiers="const"> <return type="String" /> <argument index="0" name="tag" type="int" /> <description> @@ -1023,5 +1288,17 @@ <constant name="CONTOUR_CURVE_TAG_OFF_CUBIC" value="2" enum="ContourPointTag"> Contour point isn't on the curve, but serves as a control point for a cubic Bézier arc. </constant> + <constant name="SPACING_GLYPH" value="0" enum="SpacingType"> + Spacing for each glyph. + </constant> + <constant name="SPACING_SPACE" value="1" enum="SpacingType"> + Spacing for the space character. + </constant> + <constant name="SPACING_TOP" value="2" enum="SpacingType"> + Spacing at the top of the line. + </constant> + <constant name="SPACING_BOTTOM" value="3" enum="SpacingType"> + Spacing at the bottom of the line. + </constant> </constants> </class> diff --git a/doc/classes/TreeItem.xml b/doc/classes/TreeItem.xml index 406c074758..b997d87ac0 100644 --- a/doc/classes/TreeItem.xml +++ b/doc/classes/TreeItem.xml @@ -140,6 +140,14 @@ <return type="Font" /> <argument index="0" name="column" type="int" /> <description> + Returns custom font used to draw text in the column [code]column[/code]. + </description> + </method> + <method name="get_custom_font_size" qualifiers="const"> + <return type="int" /> + <argument index="0" name="column" type="int" /> + <description> + Returns custom font size used to draw text in the column [code]column[/code]. </description> </method> <method name="get_expand_right" qualifiers="const"> @@ -464,6 +472,15 @@ <argument index="0" name="column" type="int" /> <argument index="1" name="font" type="Font" /> <description> + Sets custom font used to draw text in the column [code]column[/code]. + </description> + </method> + <method name="set_custom_font_size"> + <return type="void" /> + <argument index="0" name="column" type="int" /> + <argument index="1" name="font_size" type="int" /> + <description> + Sets custom font size used to draw text in the column [code]column[/code]. </description> </method> <method name="set_editable"> diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index 2478b71b6a..46f38e91f7 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -211,6 +211,9 @@ <member name="physics_object_picking" type="bool" setter="set_physics_object_picking" getter="get_physics_object_picking" default="false"> If [code]true[/code], the objects rendered by viewport become subjects of mouse picking process. </member> + <member name="scale_3d" type="int" setter="set_scale_3d" getter="get_scale_3d" enum="Viewport.Scale3D" default="0"> + The scale at which 3D content is rendered. + </member> <member name="screen_space_aa" type="int" setter="set_screen_space_aa" getter="get_screen_space_aa" enum="Viewport.ScreenSpaceAA" default="0"> Sets the screen-space antialiasing method used. Screen-space antialiasing works by selectively blurring edges in a post-process shader. It differs from MSAA which takes multiple coverage samples while rendering objects. Screen-space AA methods are typically faster than MSAA and will smooth out specular aliasing, but tend to make scenes appear blurry. </member> @@ -271,6 +274,16 @@ </signal> </signals> <constants> + <constant name="SCALE_3D_DISABLED" value="0" enum="Scale3D"> + </constant> + <constant name="SCALE_3D_75_PERCENT" value="1" enum="Scale3D"> + </constant> + <constant name="SCALE_3D_50_PERCENT" value="2" enum="Scale3D"> + </constant> + <constant name="SCALE_3D_33_PERCENT" value="3" enum="Scale3D"> + </constant> + <constant name="SCALE_3D_25_PERCENT" value="4" enum="Scale3D"> + </constant> <constant name="SHADOW_ATLAS_QUADRANT_SUBDIV_DISABLED" value="0" enum="ShadowAtlasQuadrantSubdiv"> This quadrant will not be used. </constant> diff --git a/doc/classes/VisualScriptCustomNodes.xml b/doc/classes/VisualScriptCustomNodes.xml new file mode 100644 index 0000000000..3ef8022f5e --- /dev/null +++ b/doc/classes/VisualScriptCustomNodes.xml @@ -0,0 +1,39 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualScriptCustomNodes" inherits="Object" version="4.0"> + <brief_description> + Manages custom nodes for the Visual Script editor. + </brief_description> + <description> + This singleton can be used to manage (i.e., add or remove) custom nodes for the Visual Script editor. + </description> + <tutorials> + </tutorials> + <methods> + <method name="add_custom_node"> + <return type="void" /> + <argument index="0" name="name" type="String" /> + <argument index="1" name="category" type="String" /> + <argument index="2" name="script" type="Script" /> + <description> + Add a custom Visual Script node to the editor. It'll be placed under "Custom Nodes" with the [code]category[/code] as the parameter. + </description> + </method> + <method name="remove_custom_node"> + <return type="void" /> + <argument index="0" name="name" type="String" /> + <argument index="1" name="category" type="String" /> + <description> + Remove a custom Visual Script node from the editor. Custom nodes already placed on scripts won't be removed. + </description> + </method> + </methods> + <signals> + <signal name="custom_nodes_updated"> + <description> + Emitted when a custom Visual Script node is added or removed. + </description> + </signal> + </signals> + <constants> + </constants> +</class> diff --git a/doc/classes/XRInterface.xml b/doc/classes/XRInterface.xml index 1fb73e59b4..2a740ab1e8 100644 --- a/doc/classes/XRInterface.xml +++ b/doc/classes/XRInterface.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="XRInterface" inherits="RefCounted" version="4.0"> <brief_description> - Base class for an AR/VR interface implementation. + Base class for an XR interface implementation. </brief_description> <description> This class needs to be implemented to make an AR or VR platform available to Godot and these should be implemented as C++ modules or GDNative modules (note that for GDNative the subclass XRScriptInterface should be used). Part of the interface is exposed to GDScript so you can detect, enable and configure an AR or VR platform. @@ -26,17 +26,17 @@ <method name="get_name" qualifiers="const"> <return type="StringName" /> <description> - Returns the name of this interface (OpenVR, OpenHMD, ARKit, etc). + Returns the name of this interface (OpenXR, OpenVR, OpenHMD, ARKit, etc). </description> </method> - <method name="get_render_targetsize"> + <method name="get_render_target_size"> <return type="Vector2" /> <description> Returns the resolution at which we should render our intermediate results before things like lens distortion are applied by the VR platform. </description> </method> <method name="get_tracking_status" qualifiers="const"> - <return type="int" enum="XRInterface.Tracking_status" /> + <return type="int" enum="XRInterface.TrackingStatus" /> <description> If supported, returns the status of our tracking. This will allow you to provide feedback to the user whether there are issues with positional tracking. </description> @@ -52,11 +52,17 @@ <description> Call this to initialize this interface. The first interface that is initialized is identified as the primary interface and it will be used for rendering output. After initializing the interface you want to use you then need to enable the AR/VR mode of a viewport and rendering should commence. - [b]Note:[/b] You must enable the AR/VR mode on the main viewport for any device that uses the main output of Godot, such as for mobile VR. + [b]Note:[/b] You must enable the XR mode on the main viewport for any device that uses the main output of Godot, such as for mobile VR. If you do this for a platform that handles its own output (such as OpenVR) Godot will show just one eye without distortion on screen. Alternatively, you can add a separate viewport node to your scene and enable AR/VR on that viewport. It will be used to output to the HMD, leaving you free to do anything you like in the main window, such as using a separate camera as a spectator camera or rendering something completely different. While currently not used, you can activate additional interfaces. You may wish to do this if you want to track controllers from other platforms. However, at this point in time only one interface can render to an HMD. </description> </method> + <method name="is_initialized" qualifiers="const"> + <return type="bool" /> + <description> + Is [code]true[/code] if this interface has been initialised. + </description> + </method> <method name="uninitialize"> <return type="void" /> <description> @@ -68,10 +74,7 @@ <member name="ar_is_anchor_detection_enabled" type="bool" setter="set_anchor_detection_is_enabled" getter="get_anchor_detection_is_enabled" default="false"> On an AR interface, [code]true[/code] if anchor detection is enabled. </member> - <member name="interface_is_initialized" type="bool" setter="set_is_initialized" getter="is_initialized" default="false"> - [code]true[/code] if this interface been initialized. - </member> - <member name="interface_is_primary" type="bool" setter="set_is_primary" getter="is_primary" default="false"> + <member name="interface_is_primary" type="bool" setter="set_primary" getter="is_primary" default="false"> [code]true[/code] if this is the primary interface. </member> </members> @@ -89,7 +92,7 @@ This interface supports AR (video background and real world tracking). </constant> <constant name="XR_EXTERNAL" value="8" enum="Capabilities"> - This interface outputs to an external device. If the main viewport is used, the on screen output is an unmodified buffer of either the left or right eye (stretched if the viewport size is not changed to the same aspect ratio of [method get_render_targetsize]). Using a separate viewport node frees up the main viewport for other purposes. + This interface outputs to an external device. If the main viewport is used, the on screen output is an unmodified buffer of either the left or right eye (stretched if the viewport size is not changed to the same aspect ratio of [method get_render_target_size]). Using a separate viewport node frees up the main viewport for other purposes. </constant> <constant name="EYE_MONO" value="0" enum="Eyes"> Mono output, this is mostly used internally when retrieving positioning information for our camera node or when stereo scopic rendering is not supported. @@ -100,19 +103,19 @@ <constant name="EYE_RIGHT" value="2" enum="Eyes"> Right eye output, this is mostly used internally when rendering the image for the right eye and obtaining positioning and projection information. </constant> - <constant name="XR_NORMAL_TRACKING" value="0" enum="Tracking_status"> + <constant name="XR_NORMAL_TRACKING" value="0" enum="TrackingStatus"> Tracking is behaving as expected. </constant> - <constant name="XR_EXCESSIVE_MOTION" value="1" enum="Tracking_status"> + <constant name="XR_EXCESSIVE_MOTION" value="1" enum="TrackingStatus"> Tracking is hindered by excessive motion (the player is moving faster than tracking can keep up). </constant> - <constant name="XR_INSUFFICIENT_FEATURES" value="2" enum="Tracking_status"> + <constant name="XR_INSUFFICIENT_FEATURES" value="2" enum="TrackingStatus"> Tracking is hindered by insufficient features, it's too dark (for camera-based tracking), player is blocked, etc. </constant> - <constant name="XR_UNKNOWN_TRACKING" value="3" enum="Tracking_status"> + <constant name="XR_UNKNOWN_TRACKING" value="3" enum="TrackingStatus"> We don't know the status of the tracking or this interface does not provide feedback. </constant> - <constant name="XR_NOT_TRACKING" value="4" enum="Tracking_status"> + <constant name="XR_NOT_TRACKING" value="4" enum="TrackingStatus"> Tracking is not functional (camera not plugged in or obscured, lighthouses turned off, etc.). </constant> </constants> diff --git a/doc/classes/XRInterfaceExtension.xml b/doc/classes/XRInterfaceExtension.xml new file mode 100644 index 0000000000..46d8d7e4e8 --- /dev/null +++ b/doc/classes/XRInterfaceExtension.xml @@ -0,0 +1,126 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="XRInterfaceExtension" inherits="XRInterface" version="4.0"> + <brief_description> + Base class for XR interface extensions (plugins). + </brief_description> + <description> + External XR interface plugins should inherit from this class. + </description> + <tutorials> + </tutorials> + <methods> + <method name="_commit_views" qualifiers="virtual"> + <return type="void" /> + <argument index="0" name="" type="RID" /> + <argument index="1" name="" type="Rect2" /> + <description> + </description> + </method> + <method name="_get_anchor_detection_is_enabled" qualifiers="virtual const"> + <return type="bool" /> + <description> + </description> + </method> + <method name="_get_camera_feed_id" qualifiers="virtual const"> + <return type="int" /> + <description> + </description> + </method> + <method name="_get_camera_transform" qualifiers="virtual"> + <return type="Transform3D" /> + <description> + </description> + </method> + <method name="_get_capabilities" qualifiers="virtual const"> + <return type="int" /> + <description> + </description> + </method> + <method name="_get_name" qualifiers="virtual const"> + <return type="StringName" /> + <description> + </description> + </method> + <method name="_get_projection_for_view" qualifiers="virtual"> + <return type="PackedFloat64Array" /> + <argument index="0" name="view" type="int" /> + <argument index="1" name="aspect" type="float" /> + <argument index="2" name="z_near" type="float" /> + <argument index="3" name="z_far" type="float" /> + <description> + </description> + </method> + <method name="_get_render_target_size" qualifiers="virtual"> + <return type="Vector2" /> + <description> + </description> + </method> + <method name="_get_tracking_status" qualifiers="virtual const"> + <return type="int" /> + <description> + </description> + </method> + <method name="_get_transform_for_view" qualifiers="virtual"> + <return type="Transform3D" /> + <argument index="0" name="view" type="int" /> + <argument index="1" name="cam_transform" type="Transform3D" /> + <description> + </description> + </method> + <method name="_get_view_count" qualifiers="virtual"> + <return type="int" /> + <description> + </description> + </method> + <method name="_initialize" qualifiers="virtual"> + <return type="bool" /> + <description> + </description> + </method> + <method name="_is_initialized" qualifiers="virtual const"> + <return type="bool" /> + <description> + </description> + </method> + <method name="_notification" qualifiers="virtual"> + <return type="void" /> + <argument index="0" name="what" type="int" /> + <description> + </description> + </method> + <method name="_process" qualifiers="virtual"> + <return type="void" /> + <description> + </description> + </method> + <method name="_set_anchor_detection_is_enabled" qualifiers="virtual"> + <return type="void" /> + <argument index="0" name="enabled" type="bool" /> + <description> + </description> + </method> + <method name="_uninitialize" qualifiers="virtual"> + <return type="void" /> + <description> + </description> + </method> + <method name="add_blit"> + <return type="void" /> + <argument index="0" name="render_target" type="RID" /> + <argument index="1" name="rect" type="Rect2i" /> + <argument index="2" name="use_layer" type="bool" /> + <argument index="3" name="layer" type="int" /> + <argument index="4" name="apply_lens_distortion" type="bool" /> + <argument index="5" name="eye_center" type="Vector2" /> + <argument index="6" name="k1" type="float" /> + <argument index="7" name="k2" type="float" /> + <argument index="8" name="upscale" type="float" /> + <argument index="9" name="aspect_ratio" type="float" /> + <description> + Blits our render results to screen optionally applying lens distortion. This can only be called while processing [code]_commit_views[/code]. + </description> + </method> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/XRServer.xml b/doc/classes/XRServer.xml index 5dd9b75ad2..85170804cc 100644 --- a/doc/classes/XRServer.xml +++ b/doc/classes/XRServer.xml @@ -37,13 +37,6 @@ You should call this method after a few seconds have passed. For instance, when the user requests a realignment of the display holding a designated button on a controller for a short period of time, or when implementing a teleport mechanism. </description> </method> - <method name="clear_primary_interface_if"> - <return type="void" /> - <argument index="0" name="interface" type="XRInterface" /> - <description> - Clears our current primary interface if it is set to the provided interface. - </description> - </method> <method name="find_interface" qualifiers="const"> <return type="XRInterface" /> <argument index="0" name="name" type="String" /> |