13 files changed, 77 insertions, 32 deletions
diff --git a/doc/classes/BaseMaterial3D.xml b/doc/classes/BaseMaterial3D.xml
index 33a129a48e..2262c4fe47 100644
--- a/doc/classes/BaseMaterial3D.xml
+++ b/doc/classes/BaseMaterial3D.xml
@@ -82,7 +82,7 @@
 			The hashing scale for Alpha Hash. Recommended values between [code]0[/code] and [code]2[/code].
 		</member>
 		<member name="alpha_scissor_threshold" type="float" setter="set_alpha_scissor_threshold" getter="get_alpha_scissor_threshold">
-			Threshold at which the alpha scissor will discard values.
+			Threshold at which the alpha scissor will discard values. Higher values will result in more pixels being discarded. If the material becomes too opaque at a distance, try increasing [member alpha_scissor_threshold]. If the material disappears at a distance, try decreasing [member alpha_scissor_threshold].
 		</member>
 		<member name="anisotropy" type="float" setter="set_anisotropy" getter="get_anisotropy" default="0.0">
 			The strength of the anisotropy effect. This is multiplied by [member anisotropy_flowmap]'s alpha channel if a texture is defined there and the texture contains an alpha channel.
diff --git a/doc/classes/CPUParticles3D.xml b/doc/classes/CPUParticles3D.xml
index 99fd0501fc..6b39c08b3f 100644
--- a/doc/classes/CPUParticles3D.xml
+++ b/doc/classes/CPUParticles3D.xml
@@ -123,13 +123,16 @@
 			Minimum particle animation speed.
 		</member>
 		<member name="color" type="Color" setter="set_color" getter="get_color" default="Color(1, 1, 1, 1)">
-			Each particle's initial color. To have particle display color in a [BaseMaterial3D] make sure to set [member BaseMaterial3D.vertex_color_use_as_albedo] to [code]true[/code].
+			Each particle's initial color.
+			[b]Note:[/b] [member color] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member color] will have no visible effect.
 		</member>
 		<member name="color_initial_ramp" type="Gradient" setter="set_color_initial_ramp" getter="get_color_initial_ramp">
 			Each particle's initial color will vary along this [GradientTexture1D] (multiplied with [member color]).
+			[b]Note:[/b] [member color_initial_ramp] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member color_initial_ramp] will have no visible effect.
 		</member>
 		<member name="color_ramp" type="Gradient" setter="set_color_ramp" getter="get_color_ramp">
 			Each particle's color will vary along this [GradientTexture1D] over its lifetime (multiplied with [member color]).
+			[b]Note:[/b] [member color_ramp] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member color_ramp] will have no visible effect.
 		</member>
 		<member name="damping_curve" type="Curve" setter="set_param_curve" getter="get_param_curve">
 			Damping will vary along this [Curve].
@@ -151,6 +154,7 @@
 		</member>
 		<member name="emission_colors" type="PackedColorArray" setter="set_emission_colors" getter="get_emission_colors" default="PackedColorArray()">
 			Sets the [Color]s to modulate particles by when using [constant EMISSION_SHAPE_POINTS] or [constant EMISSION_SHAPE_DIRECTED_POINTS].
+			[b]Note:[/b] [member emission_colors] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member emission_colors] will have no visible effect.
 		</member>
 		<member name="emission_normals" type="PackedVector3Array" setter="set_emission_normals" getter="get_emission_normals">
 			Sets the direction the particles will be emitted in when using [constant EMISSION_SHAPE_DIRECTED_POINTS].
diff --git a/doc/classes/CanvasItem.xml b/doc/classes/CanvasItem.xml
index d1fdca5814..d8c1af0b3c 100644
--- a/doc/classes/CanvasItem.xml
+++ b/doc/classes/CanvasItem.xml
@@ -5,7 +5,7 @@
 	</brief_description>
 	<description>
 		Base class of anything 2D. Canvas items are laid out in a tree; children inherit and extend their parent's transform. [CanvasItem] is extended by [Control] for anything GUI-related, and by [Node2D] for anything related to the 2D engine.
-		Any [CanvasItem] can draw. For this, [method update] is called by the engine, then [constant NOTIFICATION_DRAW] will be received on idle time to request redraw. Because of this, canvas items don't need to be redrawn on every frame, improving the performance significantly. Several functions for drawing on the [CanvasItem] are provided (see [code]draw_*[/code] functions). However, they can only be used inside [method _draw], its corresponding [method Object._notification] or methods connected to the [signal draw] signal.
+		Any [CanvasItem] can draw. For this, [method queue_redraw] is called by the engine, then [constant NOTIFICATION_DRAW] will be received on idle time to request redraw. Because of this, canvas items don't need to be redrawn on every frame, improving the performance significantly. Several functions for drawing on the [CanvasItem] are provided (see [code]draw_*[/code] functions). However, they can only be used inside [method _draw], its corresponding [method Object._notification] or methods connected to the [signal draw] signal.
 		Canvas items are drawn in tree order. By default, children are on top of their parents so a root [CanvasItem] will be drawn behind everything. This behavior can be changed on a per-item basis.
 		A [CanvasItem] can also be hidden, which will also hide its children. It provides many ways to change parameters such as modulation (for itself and its children) and self modulation (only for itself), as well as its blend mode.
 		Ultimately, a transform notification can be requested, which will notify the node that its global position changed in case the parent tree changed.
@@ -20,7 +20,7 @@
 		<method name="_draw" qualifiers="virtual">
 			<return type="void" />
 			<description>
-				Called when [CanvasItem] has been requested to redraw (when [method update] is called, either manually or by the engine).
+				Called when [CanvasItem] has been requested to redraw (after [method queue_redraw] is called, either manually or by the engine).
 				Corresponds to the [constant NOTIFICATION_DRAW] notification in [method Object._notification].
 			</description>
 		</method>
@@ -500,6 +500,12 @@
 				Transformations issued by [param event]'s inputs are applied in local space instead of global space.
 			</description>
 		</method>
+		<method name="queue_redraw">
+			<return type="void" />
+			<description>
+				Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. This only occurs [b]once[/b] per frame, even if this method has been called multiple times.
+			</description>
+		</method>
 		<method name="set_notify_local_transform">
 			<return type="void" />
 			<param index="0" name="enable" type="bool" />
@@ -520,12 +526,6 @@
 				Show the [CanvasItem] if it's currently hidden. This is equivalent to setting [member visible] to [code]true[/code]. For controls that inherit [Popup], the correct way to make them visible is to call one of the multiple [code]popup*()[/code] functions instead.
 			</description>
 		</method>
-		<method name="update">
-			<return type="void" />
-			<description>
-				Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. This only occurs [b]once[/b] per frame, even if this method has been called multiple times.
-			</description>
-		</method>
 	</methods>
 	<members>
 		<member name="clip_children" type="bool" setter="set_clip_children" getter="is_clipping_children" default="false">
diff --git a/doc/classes/EditorProperty.xml b/doc/classes/EditorProperty.xml
index 67204f2a15..7bac4bf7ac 100644
--- a/doc/classes/EditorProperty.xml
+++ b/doc/classes/EditorProperty.xml
@@ -105,6 +105,8 @@
 		<signal name="property_changed">
 			<param index="0" name="property" type="StringName" />
 			<param index="1" name="value" type="Variant" />
+			<param index="2" name="field" type="StringName" />
+			<param index="3" name="changing" type="bool" />
 			<description>
 				Do not emit this manually, use the [method emit_changed] method instead.
 			</description>
diff --git a/doc/classes/Node.xml b/doc/classes/Node.xml
index b882425960..87edc7de0a 100644
--- a/doc/classes/Node.xml
+++ b/doc/classes/Node.xml
@@ -856,8 +856,8 @@
 		<constant name="NOTIFICATION_UNPARENTED" value="19">
 			Notification received when a node is unparented (parent removed it from the list of children).
 		</constant>
-		<constant name="NOTIFICATION_INSTANCED" value="20">
-			Notification received when the node is instantiated.
+		<constant name="NOTIFICATION_SCENE_INSTANTIATED" value="20">
+			Notification received by scene owner when its scene is instantiated.
 		</constant>
 		<constant name="NOTIFICATION_DRAG_BEGIN" value="21">
 			Notification received when a drag operation begins. All nodes receive this notification, not only the dragged one.
diff --git a/doc/classes/PackedScene.xml b/doc/classes/PackedScene.xml
index 754d3ac73d..97595a6984 100644
--- a/doc/classes/PackedScene.xml
+++ b/doc/classes/PackedScene.xml
@@ -92,7 +92,7 @@
 			<return type="Node" />
 			<param index="0" name="edit_state" type="int" enum="PackedScene.GenEditState" default="0" />
 			<description>
-				Instantiates the scene's node hierarchy. Triggers child scene instantiation(s). Triggers a [constant Node.NOTIFICATION_INSTANCED] notification on the root node.
+				Instantiates the scene's node hierarchy. Triggers child scene instantiation(s). Triggers a [constant Node.NOTIFICATION_SCENE_INSTANTIATED] notification on the root node.
 			</description>
 		</method>
 		<method name="pack">
diff --git a/doc/classes/ParticleProcessMaterial.xml b/doc/classes/ParticleProcessMaterial.xml
index 1526658eed..a41207e9b3 100644
--- a/doc/classes/ParticleProcessMaterial.xml
+++ b/doc/classes/ParticleProcessMaterial.xml
@@ -129,13 +129,16 @@
 			Should collision take scale into account.
 		</member>
 		<member name="color" type="Color" setter="set_color" getter="get_color" default="Color(1, 1, 1, 1)">
-			Each particle's initial color. If the [GPUParticles2D]'s [code]texture[/code] is defined, it will be multiplied by this color. To have particle display color in a [BaseMaterial3D] make sure to set [member BaseMaterial3D.vertex_color_use_as_albedo] to [code]true[/code].
+			Each particle's initial color. If the [GPUParticles2D]'s [code]texture[/code] is defined, it will be multiplied by this color.
+			[b]Note:[/b] [member color] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member color] will have no visible effect.
 		</member>
 		<member name="color_initial_ramp" type="Texture2D" setter="set_color_initial_ramp" getter="get_color_initial_ramp">
 			Each particle's initial color will vary along this [GradientTexture1D] (multiplied with [member color]).
+			[b]Note:[/b] [member color_initial_ramp] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member color_initial_ramp] will have no visible effect.
 		</member>
 		<member name="color_ramp" type="Texture2D" setter="set_color_ramp" getter="get_color_ramp">
 			Each particle's color will vary along this [GradientTexture1D] over its lifetime (multiplied with [member color]).
+			[b]Note:[/b] [member color_ramp] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member color_ramp] will have no visible effect.
 		</member>
 		<member name="damping_curve" type="Texture2D" setter="set_param_texture" getter="get_param_texture">
 			Damping will vary along this [CurveTexture].
@@ -154,6 +157,7 @@
 		</member>
 		<member name="emission_color_texture" type="Texture2D" setter="set_emission_color_texture" getter="get_emission_color_texture">
 			Particle color will be modulated by color determined by sampling this texture at the same point as the [member emission_point_texture].
+			[b]Note:[/b] [member emission_color_texture] multiplies the particle mesh's vertex colors. To have a visible effect on a [BaseMaterial3D], [member BaseMaterial3D.vertex_color_use_as_albedo] [i]must[/i] be [code]true[/code]. For a [ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the shader's [code]fragment()[/code] function. Otherwise, [member emission_color_texture] will have no visible effect.
 		</member>
 		<member name="emission_normal_texture" type="Texture2D" setter="set_emission_normal_texture" getter="get_emission_normal_texture">
 			Particle velocity and rotation will be set by sampling this texture at the same point as the [member emission_point_texture]. Used only in [constant EMISSION_SHAPE_DIRECTED_POINTS]. Can be created automatically from mesh or node by selecting "Create Emission Points from Mesh/Node" under the "Particles" tool in the toolbar.
diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml
index 8f749f3a37..e8e8ca3725 100644
--- a/doc/classes/ProjectSettings.xml
+++ b/doc/classes/ProjectSettings.xml
@@ -100,7 +100,7 @@
 				    # `path` will contain the absolute path to `hello.txt` next to the executable.
 				    # This is *not* identical to using `ProjectSettings.globalize_path()` with a `res://` path,
 				    # but is close enough in spirit.
-				    path = OS.get_executable_path().get_base_dir().plus_file("hello.txt")
+				    path = OS.get_executable_path().get_base_dir().path_join("hello.txt")
 				[/codeblock]
 			</description>
 		</method>
@@ -1639,8 +1639,11 @@
 		</member>
 		<member name="rendering/2d/snap/snap_2d_vertices_to_pixel" type="bool" setter="" getter="" default="false">
 		</member>
-		<member name="rendering/anti_aliasing/quality/msaa" type="int" setter="" getter="" default="0">
-			Sets the number of MSAA samples to use (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. See also bilinear scaling 3d [member rendering/scaling_3d/mode] for supersampling, which provides higher quality but is much more expensive.
+		<member name="rendering/anti_aliasing/quality/msaa_2d" type="int" setter="" getter="" default="0">
+			Sets the number of MSAA samples to use for 2D/Canvas rendering (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. This has no effect on shader-induced aliasing or texture aliasing.
+		</member>
+		<member name="rendering/anti_aliasing/quality/msaa_3d" type="int" setter="" getter="" default="0">
+			Sets the number of MSAA samples to use for 3D rendering (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. See also bilinear scaling 3d [member rendering/scaling_3d/mode] for supersampling, which provides higher quality but is much more expensive. This has no effect on shader-induced aliasing or texture aliasing.
 		</member>
 		<member name="rendering/anti_aliasing/quality/screen_space_aa" type="int" setter="" getter="" default="0">
 			Sets the screen-space antialiasing mode for the default screen [Viewport]. Screen-space antialiasing works by selectively blurring edges in a post-process shader. It differs from MSAA which takes multiple coverage samples while rendering objects. Screen-space AA methods are typically faster than MSAA and will smooth out specular aliasing, but tend to make scenes appear blurry. The blurriness is partially counteracted by automatically using a negative mipmap LOD bias (see [member rendering/textures/default_filters/texture_mipmap_bias]).
@@ -1874,7 +1877,7 @@
 			Sets the scaling 3D mode. Bilinear scaling renders at different resolution to either undersample or supersample the viewport. FidelityFX Super Resolution 1.0, abbreviated to FSR, is an upscaling technology that produces high quality images at fast framerates by using a spatially aware upscaling algorithm. FSR is slightly more expensive than bilinear, but it produces significantly higher image quality. FSR should be used where possible.
 		</member>
 		<member name="rendering/scaling_3d/scale" type="float" setter="" getter="" default="1.0">
-			Scales the 3D render buffer based on the viewport size uses an image filter specified in [member rendering/scaling_3d/mode] to scale the output image to the full viewport size. Values lower than [code]1.0[/code] can be used to speed up 3D rendering at the cost of quality (undersampling). Values greater than [code]1.0[/code] are only valid for bilinear mode and can be used to improve 3D rendering quality at a high performance cost (supersampling). See also [member rendering/anti_aliasing/quality/msaa] for multi-sample antialiasing, which is significantly cheaper but only smoothens the edges of polygons.
+			Scales the 3D render buffer based on the viewport size uses an image filter specified in [member rendering/scaling_3d/mode] to scale the output image to the full viewport size. Values lower than [code]1.0[/code] can be used to speed up 3D rendering at the cost of quality (undersampling). Values greater than [code]1.0[/code] are only valid for bilinear mode and can be used to improve 3D rendering quality at a high performance cost (supersampling). See also [member rendering/anti_aliasing/quality/msaa_3d] for multi-sample antialiasing, which is significantly cheaper but only smooths the edges of polygons.
 		</member>
 		<member name="rendering/shader_compiler/shader_cache/compress" type="bool" setter="" getter="" default="true">
 		</member>
diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml
index 639db6b3b5..755e8a5839 100644
--- a/doc/classes/RenderingServer.xml
+++ b/doc/classes/RenderingServer.xml
@@ -3208,12 +3208,20 @@
 			<description>
 			</description>
 		</method>
-		<method name="viewport_set_msaa">
+		<method name="viewport_set_msaa_2d">
 			<return type="void" />
 			<param index="0" name="viewport" type="RID" />
 			<param index="1" name="msaa" type="int" enum="RenderingServer.ViewportMSAA" />
 			<description>
-				Sets the anti-aliasing mode. See [enum ViewportMSAA] for options.
+				Sets the multisample anti-aliasing mode for 2D/Canvas. See [enum ViewportMSAA] for options.
+			</description>
+		</method>
+		<method name="viewport_set_msaa_3d">
+			<return type="void" />
+			<param index="0" name="viewport" type="RID" />
+			<param index="1" name="msaa" type="int" enum="RenderingServer.ViewportMSAA" />
+			<description>
+				Sets the multisample anti-aliasing mode for 3D. See [enum ViewportMSAA] for options.
 			</description>
 		</method>
 		<method name="viewport_set_occlusion_culling_build_quality">
diff --git a/doc/classes/String.xml b/doc/classes/String.xml
index f1cd4d72f7..316bb923b7 100644
--- a/doc/classes/String.xml
+++ b/doc/classes/String.xml
@@ -566,11 +566,11 @@
 				Formats a number to have an exact number of [param digits] before the decimal point.
 			</description>
 		</method>
-		<method name="plus_file" qualifiers="const">
+		<method name="path_join" qualifiers="const">
 			<return type="String" />
 			<param index="0" name="file" type="String" />
 			<description>
-				If the string is a path, this concatenates [param file] at the end of the string as a subpath. E.g. [code]"this/is".plus_file("path") == "this/is/path"[/code].
+				If the string is a path, this concatenates [param file] at the end of the string as a subpath. E.g. [code]"this/is".path_join("path") == "this/is/path"[/code].
 			</description>
 		</method>
 		<method name="repeat" qualifiers="const">
@@ -775,6 +775,12 @@
 				Converts the String (which is a character array) to ASCII/Latin-1 encoded [PackedByteArray] (which is an array of bytes). The conversion is faster compared to [method to_utf8_buffer], as this method assumes that all the characters in the String are ASCII/Latin-1 characters, unsupported characters are replaced with spaces.
 			</description>
 		</method>
+		<method name="to_camel_case" qualifiers="const">
+			<return type="String" />
+			<description>
+				Returns the string converted to [code]camelCase[/code].
+			</description>
+		</method>
 		<method name="to_float" qualifiers="const">
 			<return type="float" />
 			<description>
@@ -804,6 +810,18 @@
 				Returns the string converted to lowercase.
 			</description>
 		</method>
+		<method name="to_pascal_case" qualifiers="const">
+			<return type="String" />
+			<description>
+				Returns the string converted to [code]PascalCase[/code].
+			</description>
+		</method>
+		<method name="to_snake_case" qualifiers="const">
+			<return type="String" />
+			<description>
+				Returns the string converted to [code]snake_case[/code].
+			</description>
+		</method>
 		<method name="to_upper" qualifiers="const">
 			<return type="String" />
 			<description>
diff --git a/doc/classes/TabContainer.xml b/doc/classes/TabContainer.xml
index 74f258072c..302f9b329b 100644
--- a/doc/classes/TabContainer.xml
+++ b/doc/classes/TabContainer.xml
@@ -258,5 +258,8 @@
 		<theme_item name="tab_unselected" data_type="style" type="StyleBox">
 			The style of the other, unselected tabs.
 		</theme_item>
+		<theme_item name="tabbar_background" data_type="style" type="StyleBox">
+			The style for the background fill of the [TabBar] area.
+		</theme_item>
 	</theme_items>
 </class>
diff --git a/doc/classes/TreeItem.xml b/doc/classes/TreeItem.xml
index 6d4408cf61..fdae6d205d 100644
--- a/doc/classes/TreeItem.xml
+++ b/doc/classes/TreeItem.xml
@@ -16,9 +16,9 @@
 			<param index="1" name="button" type="Texture2D" />
 			<param index="2" name="id" type="int" default="-1" />
 			<param index="3" name="disabled" type="bool" default="false" />
-			<param index="4" name="tooltip" type="String" default="&quot;&quot;" />
+			<param index="4" name="tooltip_text" type="String" default="&quot;&quot;" />
 			<description>
-				Adds a button with [Texture2D] [param button] at column [param column]. The [param id] is used to identify the button. If not specified, the next available index is used, which may be retrieved by calling [method get_button_count] immediately before this method. Optionally, the button can be [param disabled] and have a [param tooltip].
+				Adds a button with [Texture2D] [param button] at column [param column]. The [param id] is used to identify the button. If not specified, the next available index is used, which may be retrieved by calling [method get_button_count] immediately before this method. Optionally, the button can be [param disabled] and have a [param tooltip_text].
 			</description>
 		</method>
 		<method name="call_recursive" qualifiers="vararg">
@@ -96,12 +96,12 @@
 				Returns the id for the button at index [param button_idx] in column [param column].
 			</description>
 		</method>
-		<method name="get_button_tooltip" qualifiers="const">
+		<method name="get_button_tooltip_text" qualifiers="const">
 			<return type="String" />
 			<param index="0" name="column" type="int" />
 			<param index="1" name="button_idx" type="int" />
 			<description>
-				Returns the tooltip string for the button at index [param button_idx] in column [param column].
+				Returns the tooltip text for the button at index [param button_idx] in column [param column].
 			</description>
 		</method>
 		<method name="get_cell_mode" qualifiers="const">
@@ -308,11 +308,11 @@
 				Returns item's text base writing direction.
 			</description>
 		</method>
-		<method name="get_tooltip" qualifiers="const">
+		<method name="get_tooltip_text" qualifiers="const">
 			<return type="String" />
 			<param index="0" name="column" type="int" />
 			<description>
-				Returns the given column's tooltip.
+				Returns the given column's tooltip text.
 			</description>
 		</method>
 		<method name="get_tree" qualifiers="const">
@@ -639,7 +639,7 @@
 				Sets item's text base writing direction.
 			</description>
 		</method>
-		<method name="set_tooltip">
+		<method name="set_tooltip_text">
 			<return type="void" />
 			<param index="0" name="column" type="int" />
 			<param index="1" name="tooltip" type="String" />
diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml
index 0071834ccd..87ee26fa32 100644
--- a/doc/classes/Viewport.xml
+++ b/doc/classes/Viewport.xml
@@ -218,8 +218,11 @@
 			To control this property on the root viewport, set the [member ProjectSettings.rendering/mesh_lod/lod_change/threshold_pixels] project setting.
 			[b]Note:[/b] [member mesh_lod_threshold] does not affect [GeometryInstance3D] visibility ranges (also known as "manual" LOD or hierarchical LOD).
 		</member>
-		<member name="msaa" type="int" setter="set_msaa" getter="get_msaa" enum="Viewport.MSAA" default="0">
-			The multisample anti-aliasing mode. A higher number results in smoother edges at the cost of significantly worse performance. A value of 2 or 4 is best unless targeting very high-end systems. See also bilinear scaling 3d [member scaling_3d_mode] for supersampling, which provides higher quality but is much more expensive.
+		<member name="msaa_2d" type="int" setter="set_msaa_2d" getter="get_msaa_2d" enum="Viewport.MSAA" default="0">
+			The multisample anti-aliasing mode for 2D/Canvas rendering. A higher number results in smoother edges at the cost of significantly worse performance. A value of 2 or 4 is best unless targeting very high-end systems. This has no effect on shader-induced aliasing or texture aliasing.
+		</member>
+		<member name="msaa_3d" type="int" setter="set_msaa_3d" getter="get_msaa_3d" enum="Viewport.MSAA" default="0">
+			The multisample anti-aliasing mode for 3D rendering. A higher number results in smoother edges at the cost of significantly worse performance. A value of 2 or 4 is best unless targeting very high-end systems. See also bilinear scaling 3d [member scaling_3d_mode] for supersampling, which provides higher quality but is much more expensive. This has no effect on shader-induced aliasing or texture aliasing.
 		</member>
 		<member name="own_world_3d" type="bool" setter="set_use_own_world_3d" getter="is_using_own_world_3d" default="false">
 			If [code]true[/code], the viewport will use a unique copy of the [World3D] defined in [member world_3d].
@@ -250,7 +253,7 @@
 			To control this property on the root viewport, set the [member ProjectSettings.rendering/scaling_3d/mode] project setting.
 		</member>
 		<member name="scaling_3d_scale" type="float" setter="set_scaling_3d_scale" getter="get_scaling_3d_scale" default="1.0">
-			Scales the 3D render buffer based on the viewport size uses an image filter specified in [member ProjectSettings.rendering/scaling_3d/mode] to scale the output image to the full viewport size. Values lower than [code]1.0[/code] can be used to speed up 3D rendering at the cost of quality (undersampling). Values greater than [code]1.0[/code] are only valid for bilinear mode and can be used to improve 3D rendering quality at a high performance cost (supersampling). See also [member ProjectSettings.rendering/anti_aliasing/quality/msaa] for multi-sample antialiasing, which is significantly cheaper but only smoothens the edges of polygons.
+			Scales the 3D render buffer based on the viewport size uses an image filter specified in [member ProjectSettings.rendering/scaling_3d/mode] to scale the output image to the full viewport size. Values lower than [code]1.0[/code] can be used to speed up 3D rendering at the cost of quality (undersampling). Values greater than [code]1.0[/code] are only valid for bilinear mode and can be used to improve 3D rendering quality at a high performance cost (supersampling). See also [member ProjectSettings.rendering/anti_aliasing/quality/msaa_3d] for multi-sample antialiasing, which is significantly cheaper but only smooths the edges of polygons.
 			When using FSR upscaling, AMD recommends exposing the following values as preset options to users "Ultra Quality: 0.77", "Quality: 0.67", "Balanced: 0.59", "Performance: 0.5" instead of exposing the entire scale.
 			To control this property on the root viewport, set the [member ProjectSettings.rendering/scaling_3d/scale] project setting.
 		</member>