24 files changed, 98 insertions, 39 deletions
diff --git a/doc/classes/Area3D.xml b/doc/classes/Area3D.xml
index ce49be9bc1..ea8cab324d 100644
--- a/doc/classes/Area3D.xml
+++ b/doc/classes/Area3D.xml
@@ -110,11 +110,11 @@
 		<member name="reverb_bus_amount" type="float" setter="set_reverb_amount" getter="get_reverb_amount" default="0.0">
 			The degree to which this area applies reverb to its associated audio. Ranges from [code]0[/code] to [code]1[/code] with [code]0.1[/code] precision.
 		</member>
-		<member name="reverb_bus_enable" type="bool" setter="set_use_reverb_bus" getter="is_using_reverb_bus" default="false">
+		<member name="reverb_bus_enabled" type="bool" setter="set_use_reverb_bus" getter="is_using_reverb_bus" default="false">
 			If [code]true[/code], the area applies reverb to its associated audio.
 		</member>
-		<member name="reverb_bus_name" type="StringName" setter="set_reverb_bus" getter="get_reverb_bus" default="&amp;&quot;Master&quot;">
-			The reverb bus name to use for this area's associated audio.
+		<member name="reverb_bus_name" type="StringName" setter="set_reverb_bus_name" getter="get_reverb_bus_name" default="&amp;&quot;Master&quot;">
+			The name of the reverb bus to use for this area's associated audio.
 		</member>
 		<member name="reverb_bus_uniformity" type="float" setter="set_reverb_uniformity" getter="get_reverb_uniformity" default="0.0">
 			The degree to which this area's reverb is a uniform effect. Ranges from [code]0[/code] to [code]1[/code] with [code]0.1[/code] precision.
diff --git a/doc/classes/BaseButton.xml b/doc/classes/BaseButton.xml
index 629675132a..47e1f85c97 100644
--- a/doc/classes/BaseButton.xml
+++ b/doc/classes/BaseButton.xml
@@ -68,9 +68,6 @@
 		<member name="shortcut" type="Shortcut" setter="set_shortcut" getter="get_shortcut">
 			[Shortcut] associated to the button.
 		</member>
-		<member name="shortcut_context" type="Node" setter="set_shortcut_context" getter="get_shortcut_context">
-			The [Node] which must be a parent of the focused GUI [Control] for the shortcut to be activated. If [code]null[/code], the shortcut can be activated when any control is focused (a global shortcut). This allows shortcuts to be accepted only when the user has a certain area of the GUI focused.
-		</member>
 		<member name="shortcut_in_tooltip" type="bool" setter="set_shortcut_in_tooltip" getter="is_shortcut_in_tooltip_enabled">
 			If [code]true[/code], the button will add information about its shortcut in the tooltip.
 		</member>
diff --git a/doc/classes/BaseMaterial3D.xml b/doc/classes/BaseMaterial3D.xml
index cbb58a3e1e..dbc7d0fb29 100644
--- a/doc/classes/BaseMaterial3D.xml
+++ b/doc/classes/BaseMaterial3D.xml
@@ -305,7 +305,7 @@
 		<member name="proximity_fade_distance" type="float" setter="set_proximity_fade_distance" getter="get_proximity_fade_distance" default="1.0">
 			Distance over which the fade effect takes place. The larger the distance the longer it takes for an object to fade.
 		</member>
-		<member name="proximity_fade_enable" type="bool" setter="set_proximity_fade" getter="is_proximity_fade_enabled" default="false">
+		<member name="proximity_fade_enabled" type="bool" setter="set_proximity_fade_enabled" getter="is_proximity_fade_enabled" default="false">
 			If [code]true[/code], the proximity fade effect is enabled. The proximity fade effect fades out each pixel based on its distance to another object.
 		</member>
 		<member name="refraction_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
diff --git a/doc/classes/Camera2D.xml b/doc/classes/Camera2D.xml
index 671ecb6af1..9315a85e1f 100644
--- a/doc/classes/Camera2D.xml
+++ b/doc/classes/Camera2D.xml
@@ -52,14 +52,14 @@
 			<return type="Vector2" />
 			<description>
 				Returns this camera's target position, in global coordinates.
-				[b]Note:[/b] The returned value is not the same as [member Node2D.global_position], as it is affected by the drag properties. It is also not the same as the current position if [member smoothing_enabled] is [code]true[/code] (see [method get_screen_center_position]).
+				[b]Note:[/b] The returned value is not the same as [member Node2D.global_position], as it is affected by the drag properties. It is also not the same as the current position if [member position_smoothing_enabled] is [code]true[/code] (see [method get_screen_center_position]).
 			</description>
 		</method>
 		<method name="reset_smoothing">
 			<return type="void" />
 			<description>
 				Sets the camera's position immediately to its current smoothing destination.
-				This method has no effect if [member smoothing_enabled] is [code]false[/code].
+				This method has no effect if [member position_smoothing_enabled] is [code]false[/code].
 			</description>
 		</method>
 		<method name="set_drag_margin">
@@ -138,7 +138,7 @@
 		</member>
 		<member name="limit_smoothed" type="bool" setter="set_limit_smoothing_enabled" getter="is_limit_smoothing_enabled" default="false">
 			If [code]true[/code], the camera smoothly stops when reaches its limits.
-			This property has no effect if [member smoothing_enabled] is [code]false[/code].
+			This property has no effect if [member position_smoothing_enabled] is [code]false[/code].
 			[b]Note:[/b] To immediately update the camera's position to be within limits without smoothing, even with this setting enabled, invoke [method reset_smoothing].
 		</member>
 		<member name="limit_top" type="int" setter="set_limit" getter="get_limit" default="-10000000">
@@ -147,6 +147,12 @@
 		<member name="offset" type="Vector2" setter="set_offset" getter="get_offset" default="Vector2(0, 0)">
 			The camera's relative offset. Useful for looking around or camera shake animations. The offsetted camera can go past the limits defined in [member limit_top], [member limit_bottom], [member limit_left] and [member limit_right].
 		</member>
+		<member name="position_smoothing_enabled" type="bool" setter="set_position_smoothing_enabled" getter="is_position_smoothing_enabled" default="false">
+			If [code]true[/code], the camera's view smoothly moves towards its target position at [member position_smoothing_speed].
+		</member>
+		<member name="position_smoothing_speed" type="float" setter="set_position_smoothing_speed" getter="get_position_smoothing_speed" default="5.0">
+			Speed in pixels per second of the camera's smoothing effect when [member position_smoothing_enabled] is [code]true[/code].
+		</member>
 		<member name="process_callback" type="int" setter="set_process_callback" getter="get_process_callback" enum="Camera2D.Camera2DProcessCallback" default="1">
 			The camera's process callback. See [enum Camera2DProcessCallback].
 		</member>
@@ -157,12 +163,6 @@
 		<member name="rotation_smoothing_speed" type="float" setter="set_rotation_smoothing_speed" getter="get_rotation_smoothing_speed" default="5.0">
 			The angular, asymptotic speed of the camera's rotation smoothing effect when [member rotation_smoothing_enabled] is [code]true[/code].
 		</member>
-		<member name="smoothing_enabled" type="bool" setter="set_enable_follow_smoothing" getter="is_follow_smoothing_enabled" default="false">
-			If [code]true[/code], the camera smoothly moves towards the target at [member smoothing_speed].
-		</member>
-		<member name="smoothing_speed" type="float" setter="set_follow_smoothing" getter="get_follow_smoothing" default="5.0">
-			Speed in pixels per second of the camera's smoothing effect when [member smoothing_enabled] is [code]true[/code].
-		</member>
 		<member name="zoom" type="Vector2" setter="set_zoom" getter="get_zoom" default="Vector2(1, 1)">
 			The camera's zoom. A zoom of [code]Vector(2, 2)[/code] doubles the size seen in the viewport. A zoom of [code]Vector(0.5, 0.5)[/code] halves the size seen in the viewport.
 		</member>
diff --git a/doc/classes/CanvasLayer.xml b/doc/classes/CanvasLayer.xml
index 50c0860d1f..7c1b19b961 100644
--- a/doc/classes/CanvasLayer.xml
+++ b/doc/classes/CanvasLayer.xml
@@ -5,6 +5,7 @@
 	</brief_description>
 	<description>
 		Canvas drawing layer. [CanvasItem] nodes that are direct or indirect children of a [CanvasLayer] will be drawn in that layer. The layer is a numeric index that defines the draw order. The default 2D scene renders with index 0, so a [CanvasLayer] with index -1 will be drawn below, and one with index 1 will be drawn above. This is very useful for HUDs (in layer 1+ or above), or backgrounds (in layer -1 or below).
+		Embedded [Window]s are placed in layer 1024. CanvasItems in layer 1025 or above appear in front of embedded windows, CanvasItems in layer 1023 or below appear behind embedded windows.
 	</description>
 	<tutorials>
 		<link title="Viewport and canvas transforms">$DOCS_URL/tutorials/2d/2d_transforms.html</link>
diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml
index 9c7cb7b089..7968b03c4b 100644
--- a/doc/classes/Control.xml
+++ b/doc/classes/Control.xml
@@ -1051,6 +1051,9 @@
 			[b]Note:[/b] This property is mainly intended to be used for animation purposes. Text inside the Control will look pixelated or blurry when the Control is scaled. To support multiple resolutions in your project, use an appropriate viewport stretch mode as described in the [url=$DOCS_URL/tutorials/viewports/multiple_resolutions.html]documentation[/url] instead of scaling Controls individually.
 			[b]Note:[/b] If the Control node is a child of a [Container] node, the scale will be reset to [code]Vector2(1, 1)[/code] when the scene is instantiated. To set the Control's scale when it's instantiated, wait for one frame using [code]await get_tree().process_frame[/code] then set its [member scale] property.
 		</member>
+		<member name="shortcut_context" type="Node" setter="set_shortcut_context" getter="get_shortcut_context">
+			The [Node] which must be a parent of the focused [Control] for the shortcut to be activated. If [code]null[/code], the shortcut can be activated when any control is focused (a global shortcut). This allows shortcuts to be accepted only when the user has a certain area of the GUI focused.
+		</member>
 		<member name="size" type="Vector2" setter="_set_size" getter="get_size" default="Vector2(0, 0)">
 			The size of the node's bounding rectangle, in pixels. [Container] nodes update this property automatically.
 		</member>
diff --git a/doc/classes/EditorSettings.xml b/doc/classes/EditorSettings.xml
index 7f3ffce9b7..68de08f094 100644
--- a/doc/classes/EditorSettings.xml
+++ b/doc/classes/EditorSettings.xml
@@ -457,6 +457,12 @@
 			If [code]true[/code], when saving a file, the editor will rename the old file to a different name, save a new file, then only remove the old file once the new file has been saved. This makes loss of data less likely to happen if the editor or operating system exits unexpectedly while saving (e.g. due to a crash or power outage).
 			[b]Note:[/b] On Windows, this feature can interact negatively with certain antivirus programs. In this case, you may have to set this to [code]false[/code] to prevent file locking issues.
 		</member>
+		<member name="interface/editor/accept_dialog_cancel_ok_buttons" type="int" setter="" getter="">
+			How to position the Cancel and OK buttons in the editor's [AcceptDialog]s. Different platforms have different standard behaviors for this, which can be overridden using this setting. This is useful if you use Godot both on Windows and macOS/Linux and your Godot muscle memory is stronger than your OS specific one.
+			- [b]Auto[/b] follows the platform convention: Cancel first on macOS and Linux, OK first on Windows.
+			- [b]Cancel First[/b] forces the ordering Cancel/OK.
+			- [b]OK First[/b] forces the ordering OK/Cancel.
+		</member>
 		<member name="interface/editor/automatically_open_screenshots" type="bool" setter="" getter="">
 			If [code]true[/code], automatically opens screenshots with the default program associated to [code].png[/code] files after a screenshot is taken using the [b]Editor &gt; Take Screenshot[/b] action.
 		</member>
diff --git a/doc/classes/Environment.xml b/doc/classes/Environment.xml
index 243a28e73d..33b6a786ae 100644
--- a/doc/classes/Environment.xml
+++ b/doc/classes/Environment.xml
@@ -301,6 +301,7 @@
 		<member name="volumetric_fog_density" type="float" setter="set_volumetric_fog_density" getter="get_volumetric_fog_density" default="0.05">
 			The base [i]exponential[/i] density of the volumetric fog. Set this to the lowest density you want to have globally. [FogVolume]s can be used to add to or subtract from this density in specific areas. Fog rendering is exponential as in real life.
 			A value of [code]0.0[/code] disables global volumetric fog while allowing [FogVolume]s to display volumetric fog in specific areas.
+			To make volumetric fog work as a volumetric [i]lighting[/i] solution, set [member volumetric_fog_density] to the lowest non-zero value ([code]0.0001[/code]) then increase lights' [member Light3D.light_volumetric_fog_energy] to values between [code]10000[/code] and [code]100000[/code] to compensate for the very low density.
 		</member>
 		<member name="volumetric_fog_detail_spread" type="float" setter="set_volumetric_fog_detail_spread" getter="get_volumetric_fog_detail_spread" default="2.0">
 			The distribution of size down the length of the froxel buffer. A higher value compresses the froxels closer to the camera and places more detail closer to the camera.
diff --git a/doc/classes/FogMaterial.xml b/doc/classes/FogMaterial.xml
index 7428d6169a..aab6be4212 100644
--- a/doc/classes/FogMaterial.xml
+++ b/doc/classes/FogMaterial.xml
@@ -15,6 +15,7 @@
 		</member>
 		<member name="density" type="float" setter="set_density" getter="get_density" default="1.0">
 			The density of the [FogVolume]. Denser objects are more opaque, but may suffer from under-sampling artifacts that look like stripes. Negative values can be used to subtract fog from other [FogVolume]s or global volumetric fog.
+			[b]Note:[/b] Due to limited precision, [member density] values between [code]-0.001[/code] and [code]0.001[/code] (exclusive) act like [code]0.0[/code]. This does not apply to [member Environment.volumetric_fog_density].
 		</member>
 		<member name="density_texture" type="Texture3D" setter="set_density_texture" getter="get_density_texture">
 			The 3D texture that is used to scale the [member density] of the [FogVolume]. This can be used to vary fog density within the [FogVolume] with any kind of static pattern. For animated effects, consider using a custom [url=$DOCS_URL/tutorials/shaders/shader_reference/fog_shader.html]fog shader[/url].
diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml
index 510f14ec54..eb5b3dad91 100644
--- a/doc/classes/Image.xml
+++ b/doc/classes/Image.xml
@@ -111,8 +111,8 @@
 				Copies [param src] image to this image.
 			</description>
 		</method>
-		<method name="create">
-			<return type="void" />
+		<method name="create" qualifiers="static">
+			<return type="Image" />
 			<param index="0" name="width" type="int" />
 			<param index="1" name="height" type="int" />
 			<param index="2" name="use_mipmaps" type="bool" />
@@ -121,8 +121,8 @@
 				Creates an empty image of given size and format. See [enum Format] constants. If [param use_mipmaps] is [code]true[/code] then generate mipmaps for this image. See the [method generate_mipmaps].
 			</description>
 		</method>
-		<method name="create_from_data">
-			<return type="void" />
+		<method name="create_from_data" qualifiers="static">
+			<return type="Image" />
 			<param index="0" name="width" type="int" />
 			<param index="1" name="height" type="int" />
 			<param index="2" name="use_mipmaps" type="bool" />
@@ -454,6 +454,17 @@
 				Saves the image as a WebP (Web Picture) file to a byte array. By default it will save lossless. If [param lossy] is true, the image will be saved lossy, using the [param quality] setting between 0.0 and 1.0 (inclusive).
 			</description>
 		</method>
+		<method name="set_data">
+			<return type="void" />
+			<param index="0" name="width" type="int" />
+			<param index="1" name="height" type="int" />
+			<param index="2" name="use_mipmaps" type="bool" />
+			<param index="3" name="format" type="int" enum="Image.Format" />
+			<param index="4" name="data" type="PackedByteArray" />
+			<description>
+				Overwrites data of an existing [Image]. Non-static equivalent of [method create_from_data].
+			</description>
+		</method>
 		<method name="set_pixel">
 			<return type="void" />
 			<param index="0" name="x" type="int" />
diff --git a/doc/classes/InputEventMIDI.xml b/doc/classes/InputEventMIDI.xml
index 2af88149b6..04d8cab065 100644
--- a/doc/classes/InputEventMIDI.xml
+++ b/doc/classes/InputEventMIDI.xml
@@ -90,7 +90,7 @@
 			The pressure of the MIDI signal. This value ranges from 0 to 127. For many devices, this value is always zero.
 		</member>
 		<member name="velocity" type="int" setter="set_velocity" getter="get_velocity" default="0">
-			The velocity of the MIDI signal. This value ranges from 0 to 127. For a piano, this corresponds to how quickly the key was pressed, and is rarely above about 110 in practice.
+			The velocity of the MIDI signal. This value ranges from 0 to 127. For a piano, this corresponds to how quickly the key was pressed, and is rarely above about 110 in practice. Note that some MIDI devices may send a [constant MIDI_MESSAGE_NOTE_ON] message with zero velocity and expect this to be treated the same as a [constant MIDI_MESSAGE_NOTE_OFF] message, but device implementations vary so Godot reports event data exactly as received.
 		</member>
 	</members>
 </class>
diff --git a/doc/classes/MenuBar.xml b/doc/classes/MenuBar.xml
index 3ef0572e9f..e8505937ff 100644
--- a/doc/classes/MenuBar.xml
+++ b/doc/classes/MenuBar.xml
@@ -106,9 +106,6 @@
 		<member name="prefer_global_menu" type="bool" setter="set_prefer_global_menu" getter="is_prefer_global_menu" default="true">
 			If [code]true[/code], [MenuBar] will use system global menu when supported.
 		</member>
-		<member name="shortcut_context" type="Node" setter="set_shortcut_context" getter="get_shortcut_context">
-			The [Node] which must be a parent of the focused GUI [Control] for the shortcut to be activated. If [code]null[/code], the shortcut can be activated when any control is focused (a global shortcut). This allows shortcuts to be accepted only when the user has a certain area of the GUI focused.
-		</member>
 		<member name="start_index" type="int" setter="set_start_index" getter="get_start_index" default="-1">
 			Position in the global menu to insert first [MenuBar] item at.
 		</member>
diff --git a/doc/classes/Node.xml b/doc/classes/Node.xml
index bceb285584..620895d8d8 100644
--- a/doc/classes/Node.xml
+++ b/doc/classes/Node.xml
@@ -529,9 +529,9 @@
 		<method name="move_child">
 			<return type="void" />
 			<param index="0" name="child_node" type="Node" />
-			<param index="1" name="to_position" type="int" />
+			<param index="1" name="to_index" type="int" />
 			<description>
-				Moves a child node to a different position (order) among the other children. Since calls, signals, etc are performed by tree order, changing the order of children nodes may be useful. If [param to_position] is negative, the index will be counted from the end.
+				Moves a child node to a different index (order) among the other children. Since calls, signals, etc. are performed by tree order, changing the order of children nodes may be useful. If [param to_index] is negative, the index will be counted from the end.
 				[b]Note:[/b] Internal children can only be moved within their expected "internal range" (see [code]internal[/code] parameter in [method add_child]).
 			</description>
 		</method>
diff --git a/doc/classes/OS.xml b/doc/classes/OS.xml
index 15b3d4958c..3aa26cbb21 100644
--- a/doc/classes/OS.xml
+++ b/doc/classes/OS.xml
@@ -445,6 +445,15 @@
 				[b]Note:[/b] This method is not supported on the web platform. It returns an empty string.
 			</description>
 		</method>
+		<method name="get_video_adapter_driver_info" qualifiers="const">
+			<return type="PackedStringArray" />
+			<description>
+				Returns the video adapter driver name and version for the user's currently active graphics card.
+				The first element holds the driver name, such as [code]nvidia[/code], [code]amdgpu[/code], etc.
+				The second element holds the driver version. For e.g. the [code]nvidia[/code] driver on a Linux/BSD platform, the version is in the format [code]510.85.02[/code]. For Windows, the driver's format is [code]31.0.15.1659[/code].
+				[b]Note:[/b] This method is only supported on the platforms Linux/BSD and Windows. It returns an empty array on other platforms.
+			</description>
+		</method>
 		<method name="has_environment" qualifiers="const">
 			<return type="bool" />
 			<param index="0" name="variable" type="String" />
@@ -616,11 +625,11 @@
 		</member>
 	</members>
 	<constants>
-		<constant name="VIDEO_DRIVER_VULKAN" value="0" enum="VideoDriver">
-			The Vulkan rendering backend. It requires Vulkan 1.0 support and automatically uses features from Vulkan 1.1 and 1.2 if available.
+		<constant name="RENDERING_DRIVER_VULKAN" value="0" enum="RenderingDriver">
+			The Vulkan rendering driver. It requires Vulkan 1.0 support and automatically uses features from Vulkan 1.1 and 1.2 if available.
 		</constant>
-		<constant name="VIDEO_DRIVER_OPENGL_3" value="1" enum="VideoDriver">
-			The OpenGL 3 rendering backend. It uses OpenGL 3.3 Core Profile on desktop platforms, OpenGL ES 3.0 on mobile devices, and WebGL 2.0 on Web.
+		<constant name="RENDERING_DRIVER_OPENGL3" value="1" enum="RenderingDriver">
+			The OpenGL 3 rendering driver. It uses OpenGL 3.3 Core Profile on desktop platforms, OpenGL ES 3.0 on mobile devices, and WebGL 2.0 on Web.
 		</constant>
 		<constant name="DAY_SUNDAY" value="0" enum="Weekday">
 			Sunday.
diff --git a/doc/classes/Object.xml b/doc/classes/Object.xml
index 7ad1908bb5..e663f47ddf 100644
--- a/doc/classes/Object.xml
+++ b/doc/classes/Object.xml
@@ -364,9 +364,9 @@
 		</method>
 		<method name="get_indexed" qualifiers="const">
 			<return type="Variant" />
-			<param index="0" name="property" type="NodePath" />
+			<param index="0" name="property_path" type="NodePath" />
 			<description>
-				Gets the object's property indexed by the given [NodePath]. The node path should be relative to the current object and can use the colon character ([code]:[/code]) to access nested properties. Examples: [code]"position:x"[/code] or [code]"material:next_pass:blend_mode"[/code].
+				Gets the object's property indexed by the given [param property_path]. The path should be a [NodePath] relative to the current object and can use the colon character ([code]:[/code]) to access nested properties. Examples: [code]"position:x"[/code] or [code]"material:next_pass:blend_mode"[/code].
 				[b]Note:[/b] Even though the method takes [NodePath] argument, it doesn't support actual paths to [Node]s in the scene tree, only colon-separated sub-property paths. For the purpose of nodes, use [method Node.get_node_and_resource] instead.
 			</description>
 		</method>
@@ -532,10 +532,10 @@
 		</method>
 		<method name="set_indexed">
 			<return type="void" />
-			<param index="0" name="property" type="NodePath" />
+			<param index="0" name="property_path" type="NodePath" />
 			<param index="1" name="value" type="Variant" />
 			<description>
-				Assigns a new value to the property identified by the [NodePath]. The node path should be relative to the current object and can use the colon character ([code]:[/code]) to access nested properties. Example:
+				Assigns a new value to the property identified by the [param property_path]. The path should be a [NodePath] relative to the current object and can use the colon character ([code]:[/code]) to access nested properties. Example:
 				[codeblocks]
 				[gdscript]
 				var node = Node2D.new()
diff --git a/doc/classes/ParticleProcessMaterial.xml b/doc/classes/ParticleProcessMaterial.xml
index a41207e9b3..807a94ab24 100644
--- a/doc/classes/ParticleProcessMaterial.xml
+++ b/doc/classes/ParticleProcessMaterial.xml
@@ -259,6 +259,10 @@
 		<member name="spread" type="float" setter="set_spread" getter="get_spread" default="45.0">
 			Each particle's initial direction range from [code]+spread[/code] to [code]-spread[/code] degrees.
 		</member>
+		<member name="sub_emitter_amount_at_collision" type="int" setter="set_sub_emitter_amount_at_collision" getter="get_sub_emitter_amount_at_collision">
+			Sub particle amount on collision.
+			Maximum amount set in the sub particles emitter.
+		</member>
 		<member name="sub_emitter_amount_at_end" type="int" setter="set_sub_emitter_amount_at_end" getter="get_sub_emitter_amount_at_end">
 		</member>
 		<member name="sub_emitter_frequency" type="float" setter="set_sub_emitter_frequency" getter="get_sub_emitter_frequency">
diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml
index 4b2bb3b6e9..a8080c70c6 100644
--- a/doc/classes/ProjectSettings.xml
+++ b/doc/classes/ProjectSettings.xml
@@ -413,6 +413,9 @@
 		<member name="debug/gdscript/warnings/standalone_ternary" type="int" setter="" getter="" default="1">
 			When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when calling a ternary expression that has no effect on the surrounding code, such as writing [code]42 if active else 0[/code] as a statement.
 		</member>
+		<member name="debug/gdscript/warnings/static_called_on_instance" type="int" setter="" getter="" default="1">
+			When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when calling a static method from an instance of a class instead of from the class directly.
+		</member>
 		<member name="debug/gdscript/warnings/treat_warnings_as_errors" type="bool" setter="" getter="" default="false">
 			If [code]true[/code], all warnings will be reported as if they are errors.
 		</member>
@@ -565,6 +568,13 @@
 		<member name="display/window/ios/hide_home_indicator" type="bool" setter="" getter="" default="true">
 			If [code]true[/code], the home indicator is hidden automatically. This only affects iOS devices without a physical home button.
 		</member>
+		<member name="display/window/ios/hide_status_bar" type="bool" setter="" getter="" default="true">
+			If [code]true[/code], the status bar is hidden while the app is running.
+		</member>
+		<member name="display/window/ios/suppress_ui_gesture" type="bool" setter="" getter="" default="true">
+			If [code]true[/code], it will require two swipes to access iOS UI that uses gestures.
+			[b]Note:[/b] This setting has no effect on the home indicator if [code]hide_home_indicator[/code] is [code]true[/code].
+		</member>
 		<member name="display/window/per_pixel_transparency/allowed" type="bool" setter="" getter="" default="false">
 			If [code]true[/code], allows per-pixel transparency for the window background. This affects performance, so leave it on [code]false[/code] unless you need it. See also [member display/window/size/transparent] and [member rendering/transparent_background].
 		</member>
diff --git a/doc/classes/PropertyTweener.xml b/doc/classes/PropertyTweener.xml
index 75d9c919aa..78ead65cdd 100644
--- a/doc/classes/PropertyTweener.xml
+++ b/doc/classes/PropertyTweener.xml
@@ -27,7 +27,7 @@
 				Sets a custom initial value to the [PropertyTweener]. Example:
 				[codeblock]
 				var tween = get_tree().create_tween()
-				tween.tween_property(self, "position", Vector2(200, 100), 1).from(Vector2(100, 100) #this will move the node from position (100, 100) to (200, 100)
+				tween.tween_property(self, "position", Vector2(200, 100), 1).from(Vector2(100, 100)) #this will move the node from position (100, 100) to (200, 100)
 				[/codeblock]
 			</description>
 		</method>
diff --git a/doc/classes/RDPipelineRasterizationState.xml b/doc/classes/RDPipelineRasterizationState.xml
index 39a64c730a..48599b6262 100644
--- a/doc/classes/RDPipelineRasterizationState.xml
+++ b/doc/classes/RDPipelineRasterizationState.xml
@@ -13,7 +13,7 @@
 		</member>
 		<member name="depth_bias_constant_factor" type="float" setter="set_depth_bias_constant_factor" getter="get_depth_bias_constant_factor" default="0.0">
 		</member>
-		<member name="depth_bias_enable" type="bool" setter="set_depth_bias_enable" getter="get_depth_bias_enable" default="false">
+		<member name="depth_bias_enabled" type="bool" setter="set_depth_bias_enabled" getter="get_depth_bias_enabled" default="false">
 		</member>
 		<member name="depth_bias_slope_factor" type="float" setter="set_depth_bias_slope_factor" getter="get_depth_bias_slope_factor" default="0.0">
 		</member>
diff --git a/doc/classes/RandomNumberGenerator.xml b/doc/classes/RandomNumberGenerator.xml
index b8a290381f..a6254788ce 100644
--- a/doc/classes/RandomNumberGenerator.xml
+++ b/doc/classes/RandomNumberGenerator.xml
@@ -10,10 +10,9 @@
 		[codeblock]
 		var rng = RandomNumberGenerator.new()
 		func _ready():
-		    rng.randomize()
 		    var my_random_number = rng.randf_range(-10.0, 10.0)
 		[/codeblock]
-		[b]Note:[/b] The default values of [member seed] and [member state] properties are pseudo-random, and changes when calling [method randomize]. The [code]0[/code] value documented here is a placeholder, and not the actual default seed.
+		[b]Note:[/b] The default values of [member seed] and [member state] properties are pseudo-random, and change when calling [method randomize]. The [code]0[/code] value documented here is a placeholder, and not the actual default seed.
 	</description>
 	<tutorials>
 		<link title="Random number generation">$DOCS_URL/tutorials/math/random_number_generation.html</link>
diff --git a/doc/classes/ResourceFormatLoader.xml b/doc/classes/ResourceFormatLoader.xml
index 9b8c8d4d9d..2b6376f2cd 100644
--- a/doc/classes/ResourceFormatLoader.xml
+++ b/doc/classes/ResourceFormatLoader.xml
@@ -71,6 +71,15 @@
 				The [param cache_mode] property defines whether and how the cache should be used or updated when loading the resource. See [enum CacheMode] for details.
 			</description>
 		</method>
+		<method name="_recognize_path" qualifiers="virtual const">
+			<return type="bool" />
+			<param index="0" name="path" type="String" />
+			<param index="1" name="type" type="StringName" />
+			<description>
+				Tells whether or not this loader should load a resource from its resource path for a given type.
+				If it is not implemented, the default behavior returns whether the path's extension is within the ones provided by [method _get_recognized_extensions], and if the type is within the ones provided by [method _get_resource_type].
+			</description>
+		</method>
 		<method name="_rename_dependencies" qualifiers="virtual const">
 			<return type="int" />
 			<param index="0" name="path" type="String" />
diff --git a/doc/classes/RichTextLabel.xml b/doc/classes/RichTextLabel.xml
index f4cbf4c442..b5a917b2bb 100644
--- a/doc/classes/RichTextLabel.xml
+++ b/doc/classes/RichTextLabel.xml
@@ -23,9 +23,11 @@
 			<param index="2" name="height" type="int" default="0" />
 			<param index="3" name="color" type="Color" default="Color(1, 1, 1, 1)" />
 			<param index="4" name="inline_align" type="int" enum="InlineAlignment" default="5" />
+			<param index="5" name="region" type="Rect2" default="Rect2(0, 0, 0, 0)" />
 			<description>
-				Adds an image's opening and closing tags to the tag stack, optionally providing a [param width] and [param height] to resize the image and a [param color] to tint the image.
+				Adds an image's opening and closing tags to the tag stack, optionally providing a [param width] and [param height] to resize the image, a [param color] to tint the image and a [param region] to only use parts of the image.
 				If [param width] or [param height] is set to 0, the image size will be adjusted in order to keep the original aspect ratio.
+				If [param width] and [param height] are not set, but [param region] is, the region's rect will be used.
 			</description>
 		</method>
 		<method name="add_text">
diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml
index 998e782975..fce94fe567 100644
--- a/doc/classes/Viewport.xml
+++ b/doc/classes/Viewport.xml
@@ -71,6 +71,12 @@
 			<description>
 			</description>
 		</method>
+		<method name="get_screen_transform" qualifiers="const">
+			<return type="Transform2D" />
+			<description>
+				Returns the transform from the Viewport's coordinates to the screen coordinates of the containing window manager window.
+			</description>
+		</method>
 		<method name="get_texture" qualifiers="const">
 			<return type="ViewportTexture" />
 			<description>
diff --git a/doc/classes/XROrigin3D.xml b/doc/classes/XROrigin3D.xml
index 7acee097e7..506d0fce41 100644
--- a/doc/classes/XROrigin3D.xml
+++ b/doc/classes/XROrigin3D.xml
@@ -13,6 +13,9 @@
 		<link title="XR documentation index">$DOCS_URL/tutorials/xr/index.html</link>
 	</tutorials>
 	<members>
+		<member name="current" type="bool" setter="set_current" getter="is_current" default="false">
+			Is this XROrigin3D node the current origin used by the [XRServer]?
+		</member>
 		<member name="world_scale" type="float" setter="set_world_scale" getter="get_world_scale" default="1.0">
 			Allows you to adjust the scale to your game's units. Most AR/VR platforms assume a scale of 1 game world unit = 1 real world meter.
 			[b]Note:[/b] This method is a passthrough to the [XRServer] itself.