diff options
Diffstat (limited to 'doc/classes')
128 files changed, 1443 insertions, 380 deletions
diff --git a/doc/classes/@GDScript.xml b/doc/classes/@GDScript.xml index 29bf9b62ce..553fd4d629 100644 --- a/doc/classes/@GDScript.xml +++ b/doc/classes/@GDScript.xml @@ -259,16 +259,12 @@ </description> </method> <method name="decimals"> - <return type="float"> + <return type="int"> </return> <argument index="0" name="step" type="float"> </argument> <description> - Returns the position of the first non-zero digit, after the decimal point. - [codeblock] - # n is 2 - n = decimals(0.035) - [/codeblock] + Deprecated alias for "[method step_decimals]". </description> </method> <method name="dectime"> @@ -498,6 +494,17 @@ [/codeblock] </description> </method> + <method name="is_equal_approx"> + <return type="bool"> + </return> + <argument index="0" name="a" type="float"> + </argument> + <argument index="1" name="b" type="float"> + </argument> + <description> + Returns True/False whether [code]a[/code] and [code]b[/code] are approximately equal to each other. + </description> + </method> <method name="is_inf"> <return type="bool"> </return> @@ -525,6 +532,15 @@ Returns whether [code]s[/code] is a NaN (Not-A-Number) value. </description> </method> + <method name="is_zero_approx"> + <return type="bool"> + </return> + <argument index="0" name="s" type="float"> + </argument> + <description> + Returns True/False whether [code]s[/code] is zero or almost zero. + </description> + </method> <method name="len"> <return type="int"> </return> @@ -624,6 +640,23 @@ [/codeblock] </description> </method> + <method name="move_toward"> + <return type="float"> + </return> + <argument index="0" name="from" type="float"> + </argument> + <argument index="1" name="to" type="float"> + </argument> + <argument index="2" name="delta" type="float"> + </argument> + <description> + Moves [code]from[/code] toward [code]to[/code] by the [code]delta[/code] value. + Use a negative [code]delta[/code] value to move away. + [codeblock] + move_toward(10, 5, 4) # returns 6 + [/codeblock] + </description> + </method> <method name="nearest_po2"> <return type="int"> </return> @@ -1003,6 +1036,23 @@ [/codeblock] </description> </method> + <method name="step_decimals"> + <return type="int"> + </return> + <argument index="0" name="step" type="float"> + </argument> + <description> + Returns the position of the first non-zero digit, after the decimal point. + [codeblock] + # n is 0 + n = step_decimals(5) + # n is 4 + n = step_decimals(1.0005) + # n is 9 + n = step_decimals(0.000000005) + [/codeblock] + </description> + </method> <method name="stepify"> <return type="float"> </return> diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index d1e2a9c910..760287e1b8 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -45,6 +45,8 @@ <member name="Marshalls" type="Reference" setter="" getter=""> [Marshalls] singleton </member> + <member name="NavigationMeshGenerator" type="EditorNavigationMeshGenerator" setter="" getter=""> + </member> <member name="OS" type="OS" setter="" getter=""> [OS] singleton </member> diff --git a/doc/classes/AcceptDialog.xml b/doc/classes/AcceptDialog.xml index 4adf515abc..db35b2f352 100644 --- a/doc/classes/AcceptDialog.xml +++ b/doc/classes/AcceptDialog.xml @@ -36,14 +36,14 @@ <return type="Label"> </return> <description> - Return the label used for built-in text. + Returns the label used for built-in text. </description> </method> <method name="get_ok"> <return type="Button"> </return> <description> - Return the OK Button. + Returns the OK Button. </description> </method> <method name="register_text_enter"> diff --git a/doc/classes/AnimatedSprite.xml b/doc/classes/AnimatedSprite.xml index 2d4dd0e4b2..da85f91367 100644 --- a/doc/classes/AnimatedSprite.xml +++ b/doc/classes/AnimatedSprite.xml @@ -13,7 +13,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if an animation if currently being played. + Returns [code]true[/code] if an animation if currently being played. </description> </method> <method name="play"> @@ -61,6 +61,7 @@ If [code]true[/code], the [member animation] is currently playing. </member> <member name="speed_scale" type="float" setter="set_speed_scale" getter="get_speed_scale"> + The animation speed is multiplied by this value. </member> </members> <signals> diff --git a/doc/classes/AnimatedSprite3D.xml b/doc/classes/AnimatedSprite3D.xml index 4c6868d807..96196f7601 100644 --- a/doc/classes/AnimatedSprite3D.xml +++ b/doc/classes/AnimatedSprite3D.xml @@ -13,7 +13,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if an animation if currently being played. + Returns [code]true[/code] if an animation if currently being played. </description> </method> <method name="play"> diff --git a/doc/classes/Animation.xml b/doc/classes/Animation.xml index af3abed256..c79903cb80 100644 --- a/doc/classes/Animation.xml +++ b/doc/classes/Animation.xml @@ -263,14 +263,14 @@ <argument index="0" name="path" type="NodePath"> </argument> <description> - Return the index of the specified track. If the track is not found, return -1. + Returns the index of the specified track. If the track is not found, return -1. </description> </method> <method name="get_track_count" qualifiers="const"> <return type="int"> </return> <description> - Return the amount of tracks in the animation. + Returns the amount of tracks in the animation. </description> </method> <method name="method_track_get_key_indices" qualifiers="const"> @@ -283,7 +283,7 @@ <argument index="2" name="delta" type="float"> </argument> <description> - Return all the key indices of a method track, given a position and delta time. + Returns all the key indices of a method track, given a position and delta time. </description> </method> <method name="method_track_get_name" qualifiers="const"> @@ -294,7 +294,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the method name of a method track. + Returns the method name of a method track. </description> </method> <method name="method_track_get_params" qualifiers="const"> @@ -305,7 +305,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the arguments values to be called on a method track for a given key in a given track. + Returns the arguments values to be called on a method track for a given key in a given track. </description> </method> <method name="remove_track"> @@ -345,7 +345,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the interpolation type of a given track, from the INTERPOLATION_* enum. + Returns the interpolation type of a given track, from the INTERPOLATION_* enum. </description> </method> <method name="track_get_key_count" qualifiers="const"> @@ -354,7 +354,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the amount of keys in a given track. + Returns the amount of keys in a given track. </description> </method> <method name="track_get_key_time" qualifiers="const"> @@ -365,7 +365,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the time at which the key is located. + Returns the time at which the key is located. </description> </method> <method name="track_get_key_transition" qualifiers="const"> @@ -376,7 +376,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the transition curve (easing) for a specific key (see built-in math function "ease"). + Returns the transition curve (easing) for a specific key (see built-in math function "ease"). </description> </method> <method name="track_get_key_value" qualifiers="const"> @@ -387,7 +387,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the value of a given key in a given track. + Returns the value of a given key in a given track. </description> </method> <method name="track_get_path" qualifiers="const"> @@ -438,7 +438,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return [code]true[/code] if the given track is imported. Else, return [code]false[/code]. + Returns [code]true[/code] if the given track is imported. Else, return [code]false[/code]. </description> </method> <method name="track_move_down"> @@ -450,6 +450,17 @@ Move a track down. </description> </method> + <method name="track_move_to"> + <return type="void"> + </return> + <argument index="0" name="idx" type="int"> + </argument> + <argument index="1" name="to_idx" type="int"> + </argument> + <description> + Changes the index position of track [code]idx[/code] to the one defined in [code]to_idx[/code]. + </description> + </method> <method name="track_move_up"> <return type="void"> </return> @@ -525,6 +536,19 @@ Set the interpolation type of a given track, from the INTERPOLATION_* enum. </description> </method> + <method name="track_set_key_time"> + <return type="void"> + </return> + <argument index="0" name="idx" type="int"> + </argument> + <argument index="1" name="key_idx" type="int"> + </argument> + <argument index="2" name="time" type="float"> + </argument> + <description> + Set the time of an existing key. + </description> + </method> <method name="track_set_key_transition"> <return type="void"> </return> @@ -571,6 +595,7 @@ <argument index="1" name="with_idx" type="int"> </argument> <description> + Swaps the track [code]idx[/code]'s index position with the track [code]with_idx[/code]. </description> </method> <method name="transform_track_insert_key"> @@ -598,7 +623,7 @@ <argument index="1" name="time_sec" type="float"> </argument> <description> - Return the interpolated value of a transform track at a given time (in seconds). An array consisting of 3 elements: position ([Vector3]), rotation ([Quat]) and scale ([Vector3]). + Returns the interpolated value of a transform track at a given time (in seconds). An array consisting of 3 elements: position ([Vector3]), rotation ([Quat]) and scale ([Vector3]). </description> </method> <method name="value_track_get_key_indices" qualifiers="const"> @@ -611,7 +636,7 @@ <argument index="2" name="delta" type="float"> </argument> <description> - Return all the key indices of a value track, given a position and delta time. + Returns all the key indices of a value track, given a position and delta time. </description> </method> <method name="value_track_get_update_mode" qualifiers="const"> @@ -620,7 +645,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the update mode of a value track. + Returns the update mode of a value track. </description> </method> <method name="value_track_set_update_mode"> diff --git a/doc/classes/AnimationNode.xml b/doc/classes/AnimationNode.xml index e61fe374fa..9854d4c27e 100644 --- a/doc/classes/AnimationNode.xml +++ b/doc/classes/AnimationNode.xml @@ -144,7 +144,7 @@ <return type="String"> </return> <description> - Return [code]true[/code] whether you want the blend tree editor to display filter editing on this node. + Returns [code]true[/code] whether you want the blend tree editor to display filter editing on this node. </description> </method> <method name="is_path_filtered" qualifiers="const"> @@ -153,7 +153,7 @@ <argument index="0" name="path" type="NodePath"> </argument> <description> - Return [code]true[/code] wether a given path is filtered. + Returns [code]true[/code] whether a given path is filtered. </description> </method> <method name="process" qualifiers="virtual"> @@ -204,7 +204,7 @@ </methods> <members> <member name="filter_enabled" type="bool" setter="set_filter_enabled" getter="is_filter_enabled"> - Return whether filtering is enabled. + Returns whether filtering is enabled. </member> </members> <signals> diff --git a/doc/classes/AnimationNodeStateMachine.xml b/doc/classes/AnimationNodeStateMachine.xml index b80069095b..2834f83d2f 100644 --- a/doc/classes/AnimationNodeStateMachine.xml +++ b/doc/classes/AnimationNodeStateMachine.xml @@ -1,13 +1,14 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="AnimationNodeStateMachine" inherits="AnimationRootNode" category="Core" version="3.2"> <brief_description> + State machine for control of animations. </brief_description> <description> - Contains multiple root nodes as children in a graph. Each node is used as a state, and provides multiple functions to alternate between states. Retrieve the AnimationNodeStateMachinePlayback object from the [AnimationTree] node to control it programatically. - [codeblock] - var state_machine = anim_tree["parameters/StateMachine/playback"] - state_machine.travel("SomeState") + Contains multiple nodes representing animation states, connected in a graph. Nodes transitions can be configured to happen automatically or via code, using a shortest-path algorithm. Retrieve the AnimationNodeStateMachinePlayback object from the [AnimationTree] node to control it programatically. Example: [codeblock] + var state_machine = $AnimationTree.get("parameters/playback") + state_machine.travel("some_state") + [/codeblock] </description> <tutorials> </tutorials> @@ -22,6 +23,7 @@ <argument index="2" name="position" type="Vector2" default="Vector2( 0, 0 )"> </argument> <description> + Adds a new node to the graph. The [code]position[/code] is used for display in the editor. </description> </method> <method name="add_transition"> @@ -34,18 +36,21 @@ <argument index="2" name="transition" type="AnimationNodeStateMachineTransition"> </argument> <description> + Adds a transition between the given nodes. </description> </method> <method name="get_end_node" qualifiers="const"> <return type="String"> </return> <description> + Returns the graph's end node. </description> </method> <method name="get_graph_offset" qualifiers="const"> <return type="Vector2"> </return> <description> + Returns the draw offset of the graph. Used for display in the editor. </description> </method> <method name="get_node" qualifiers="const"> @@ -54,6 +59,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Returns the animation node with the given name. </description> </method> <method name="get_node_name" qualifiers="const"> @@ -62,6 +68,7 @@ <argument index="0" name="node" type="AnimationNode"> </argument> <description> + Returns the given animation node's name. </description> </method> <method name="get_node_position" qualifiers="const"> @@ -70,12 +77,14 @@ <argument index="0" name="name" type="String"> </argument> <description> + Returns the given node's coordinates. Used for display in the editor. </description> </method> <method name="get_start_node" qualifiers="const"> <return type="String"> </return> <description> + Returns the graph's end node. </description> </method> <method name="get_transition" qualifiers="const"> @@ -84,12 +93,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> + Returns the given transition. </description> </method> <method name="get_transition_count" qualifiers="const"> <return type="int"> </return> <description> + Returns the number of connections in the graph. </description> </method> <method name="get_transition_from" qualifiers="const"> @@ -98,6 +109,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> + Returns the given transition's start node. </description> </method> <method name="get_transition_to" qualifiers="const"> @@ -106,6 +118,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> + Returns the given transition's end node. </description> </method> <method name="has_node" qualifiers="const"> @@ -114,6 +127,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Returns [code]true[/code] if the graph contains the given node. </description> </method> <method name="has_transition" qualifiers="const"> @@ -124,6 +138,7 @@ <argument index="1" name="to" type="String"> </argument> <description> + Returns [code]true[/code] if there is a transition between the given nodes. </description> </method> <method name="remove_node"> @@ -132,6 +147,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Deletes the given node from the graph. </description> </method> <method name="remove_transition"> @@ -142,6 +158,7 @@ <argument index="1" name="to" type="String"> </argument> <description> + Deletes the given transition. </description> </method> <method name="remove_transition_by_index"> @@ -150,6 +167,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> + Deletes the given transition. </description> </method> <method name="rename_node"> @@ -160,6 +178,7 @@ <argument index="1" name="new_name" type="String"> </argument> <description> + Renames the given node. </description> </method> <method name="set_end_node"> @@ -168,6 +187,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Sets the given node as the graph end point. </description> </method> <method name="set_graph_offset"> @@ -176,6 +196,7 @@ <argument index="0" name="offset" type="Vector2"> </argument> <description> + Sets the draw offset of the graph. Used for display in the editor. </description> </method> <method name="set_node_position"> @@ -186,6 +207,7 @@ <argument index="1" name="position" type="Vector2"> </argument> <description> + Sets the node's coordinates. Used for display in the editor. </description> </method> <method name="set_start_node"> @@ -194,6 +216,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Sets the given node as the graph start point. </description> </method> </methods> diff --git a/doc/classes/AnimationNodeStateMachinePlayback.xml b/doc/classes/AnimationNodeStateMachinePlayback.xml index fd38c28b16..796d92d7d6 100644 --- a/doc/classes/AnimationNodeStateMachinePlayback.xml +++ b/doc/classes/AnimationNodeStateMachinePlayback.xml @@ -1,8 +1,14 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="AnimationNodeStateMachinePlayback" inherits="Resource" category="Core" version="3.2"> <brief_description> + Playback control for AnimationNodeStateMachine. </brief_description> <description> + Allows control of [AnimationTree] state machines created with [AnimationNodeStateMachine]. Retrieve with [code]$AnimationTree.get("parameters/playback")[/code]. Example: + [codeblock] + var state_machine = $AnimationTree.get("parameters/playback") + state_machine.travel("some_state") + [/codeblock] </description> <tutorials> </tutorials> @@ -11,6 +17,7 @@ <return type="String"> </return> <description> + Returns the currently playing animation state. </description> </method> <method name="get_travel_path" qualifiers="const"> @@ -23,6 +30,7 @@ <return type="bool"> </return> <description> + Returns [code]true[/code] if an animation is playing. </description> </method> <method name="start"> @@ -31,12 +39,14 @@ <argument index="0" name="node" type="String"> </argument> <description> + Starts playing the given animation. </description> </method> <method name="stop"> <return type="void"> </return> <description> + Stops the currently playing animation. </description> </method> <method name="travel"> @@ -45,7 +55,7 @@ <argument index="0" name="to_node" type="String"> </argument> <description> - Transition from the current state to another one, while visiting all the intermediate ones. This is done via the A* algorithm. + Transitions from the current state to another one, following the shortest path. </description> </method> </methods> diff --git a/doc/classes/AnimationNodeStateMachineTransition.xml b/doc/classes/AnimationNodeStateMachineTransition.xml index a21ee50949..aeb44a789b 100644 --- a/doc/classes/AnimationNodeStateMachineTransition.xml +++ b/doc/classes/AnimationNodeStateMachineTransition.xml @@ -10,7 +10,10 @@ </methods> <members> <member name="advance_condition" type="String" setter="set_advance_condition" getter="get_advance_condition"> - Turn on auto advance when this condition is set. This is a custom text field that can be filled with a variable name. The variable can be modified from code. + Turn on auto advance when this condition is set. The provided name will become a boolean parameter on the [AnimationTree] that can be controlled from code (see [url=https://docs.godotengine.org/en/latest/tutorials/animation/animation_tree.html#controlling-from-code][/url]). For example, if [member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] is set to "idle": + [codeblock] + $animation_tree["parameters/conditions/idle"] = is_on_floor and linear_velocity.x == 0 + [/codeblock] </member> <member name="auto_advance" type="bool" setter="set_auto_advance" getter="has_auto_advance"> Turn on the transition automatically when this state is reached. This works best with [code]SWITCH_MODE_AT_END[/code]. diff --git a/doc/classes/AnimationTreePlayer.xml b/doc/classes/AnimationTreePlayer.xml index 6160b44076..818565e0dc 100644 --- a/doc/classes/AnimationTreePlayer.xml +++ b/doc/classes/AnimationTreePlayer.xml @@ -256,7 +256,7 @@ <argument index="0" name="id" type="String"> </argument> <description> - Return the input count for a given node. Different types of nodes have different amount of inputs. + Returns the input count for a given node. Different types of nodes have different amount of inputs. </description> </method> <method name="node_get_input_source" qualifiers="const"> @@ -267,7 +267,7 @@ <argument index="1" name="idx" type="int"> </argument> <description> - Return the input source for a given node input. + Returns the input source for a given node input. </description> </method> <method name="node_get_position" qualifiers="const"> diff --git a/doc/classes/Area2D.xml b/doc/classes/Area2D.xml index 2400efe0d3..8d28ddc889 100644 --- a/doc/classes/Area2D.xml +++ b/doc/classes/Area2D.xml @@ -15,7 +15,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Return an individual bit on the layer mask. Describes whether other areas will collide with this one on the given layer. + Returns an individual bit on the layer mask. Describes whether other areas will collide with this one on the given layer. </description> </method> <method name="get_collision_mask_bit" qualifiers="const"> @@ -24,7 +24,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Return an individual bit on the collision mask. Describes whether this area will collide with others on the given layer. + Returns an individual bit on the collision mask. Describes whether this area will collide with others on the given layer. </description> </method> <method name="get_overlapping_areas" qualifiers="const"> diff --git a/doc/classes/Array.xml b/doc/classes/Array.xml index ecafc3514c..75194fbf76 100644 --- a/doc/classes/Array.xml +++ b/doc/classes/Array.xml @@ -291,7 +291,7 @@ </method> <method name="shuffle"> <description> - Shuffles the array such that the items will have a random order. + Shuffles the array such that the items will have a random order. This method uses the global random number generator common to methods such as [method @GDScript.randi]. Call [method @GDScript.randomize] to ensure that a new seed will be used each time if you want non-reproducible shuffling. </description> </method> <method name="size"> diff --git a/doc/classes/ArrayMesh.xml b/doc/classes/ArrayMesh.xml index 00bd72d4a5..1707ea07e0 100644 --- a/doc/classes/ArrayMesh.xml +++ b/doc/classes/ArrayMesh.xml @@ -98,7 +98,7 @@ <argument index="0" name="name" type="String"> </argument> <description> - Return the index of the first surface with this name held within this [ArrayMesh]. If none are found -1 is returned. + Returns the index of the first surface with this name held within this [ArrayMesh]. If none are found -1 is returned. </description> </method> <method name="surface_get_array_index_len" qualifiers="const"> @@ -107,7 +107,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return the length in indices of the index array in the requested surface (see [method add_surface_from_arrays]). + Returns the length in indices of the index array in the requested surface (see [method add_surface_from_arrays]). </description> </method> <method name="surface_get_array_len" qualifiers="const"> @@ -116,7 +116,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return the length in vertices of the vertex array in the requested surface (see [method add_surface_from_arrays]). + Returns the length in vertices of the vertex array in the requested surface (see [method add_surface_from_arrays]). </description> </method> <method name="surface_get_format" qualifiers="const"> @@ -125,7 +125,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return the format mask of the requested surface (see [method add_surface_from_arrays]). + Returns the format mask of the requested surface (see [method add_surface_from_arrays]). </description> </method> <method name="surface_get_name" qualifiers="const"> @@ -143,7 +143,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return the primitive type of the requested surface (see [method add_surface_from_arrays]). + Returns the primitive type of the requested surface (see [method add_surface_from_arrays]). </description> </method> <method name="surface_remove"> @@ -205,31 +205,31 @@ Amount of weights/bone indices per vertex (always 4). </constant> <constant name="ARRAY_VERTEX" value="0" enum="ArrayType"> - Vertex array (array of [Vector3] vertices). + [PoolVector3Array], [PoolVector2Array], or [Array] of vertex positions. </constant> <constant name="ARRAY_NORMAL" value="1" enum="ArrayType"> - Normal array (array of [Vector3] normals). + [PoolVector3Array] of vertex normals. </constant> <constant name="ARRAY_TANGENT" value="2" enum="ArrayType"> - Tangent array, array of groups of 4 floats. first 3 floats determine the tangent, and the last the binormal direction as -1 or 1. + [PoolRealArray] of vertex tangents. Each element in groups of 4 floats, first 3 floats determine the tangent, and the last the binormal direction as -1 or 1. </constant> <constant name="ARRAY_COLOR" value="3" enum="ArrayType"> - Vertex array (array of [Color] colors). + [PoolColorArray] of vertex colors. </constant> <constant name="ARRAY_TEX_UV" value="4" enum="ArrayType"> - UV array (array of [Vector3] UVs or float array of groups of 2 floats (u,v)). + [PoolVector2Array] for UV coordinates. </constant> <constant name="ARRAY_TEX_UV2" value="5" enum="ArrayType"> - Second UV array (array of [Vector3] UVs or float array of groups of 2 floats (u,v)). + [PoolVector2Array] for second UV coordinates. </constant> <constant name="ARRAY_BONES" value="6" enum="ArrayType"> - Array of bone indices, as a float array. Each element in groups of 4 floats. + [PoolRealArray] or [PoolIntArray] of bone indices. Each element in groups of 4 floats. </constant> <constant name="ARRAY_WEIGHTS" value="7" enum="ArrayType"> - Array of bone weights, as a float array. Each element in groups of 4 floats. + [PoolRealArray] of bone weights. Each element in groups of 4 floats. </constant> <constant name="ARRAY_INDEX" value="8" enum="ArrayType"> - [Array] of integers used as indices referencing vertices, colors, normals, tangents, and textures. All of those arrays must have the same number of elements as the vertex array. No index can be beyond the vertex array size. When this index array is present, it puts the function into "index mode," where the index selects the *i*'th vertex, normal, tangent, color, UV, etc. This means if you want to have different normals or colors along an edge, you have to duplicate the vertices. + [PoolIntArray] of integers used as indices referencing vertices, colors, normals, tangents, and textures. All of those arrays must have the same number of elements as the vertex array. No index can be beyond the vertex array size. When this index array is present, it puts the function into "index mode," where the index selects the *i*'th vertex, normal, tangent, color, UV, etc. This means if you want to have different normals or colors along an edge, you have to duplicate the vertices. For triangles, the index array is interpreted as triples, referring to the vertices of each triangle. For lines, the index array is in pairs indicating the start and end of each line. </constant> <constant name="ARRAY_MAX" value="9" enum="ArrayType"> diff --git a/doc/classes/AudioServer.xml b/doc/classes/AudioServer.xml index 83fbd28152..6dc1600cf2 100644 --- a/doc/classes/AudioServer.xml +++ b/doc/classes/AudioServer.xml @@ -184,6 +184,12 @@ Returns the sample rate at the output of the audioserver. </description> </method> + <method name="get_output_latency" qualifiers="const"> + <return type="float"> + </return> + <description> + </description> + </method> <method name="get_speaker_mode" qualifiers="const"> <return type="int" enum="AudioServer.SpeakerMode"> </return> @@ -191,6 +197,18 @@ Returns the speaker configuration. </description> </method> + <method name="get_time_since_last_mix" qualifiers="const"> + <return type="float"> + </return> + <description> + </description> + </method> + <method name="get_time_to_next_mix" qualifiers="const"> + <return type="float"> + </return> + <description> + </description> + </method> <method name="is_bus_bypassing_effects" qualifiers="const"> <return type="bool"> </return> diff --git a/doc/classes/AudioStreamSample.xml b/doc/classes/AudioStreamSample.xml index e23080c9d3..4bcf8ea791 100644 --- a/doc/classes/AudioStreamSample.xml +++ b/doc/classes/AudioStreamSample.xml @@ -1,10 +1,11 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="AudioStreamSample" inherits="AudioStream" category="Core" version="3.2"> <brief_description> - Plays audio. + Stores audio data loaded from [code].wav[/code] files. </brief_description> <description> - Plays audio, can loop. + AudioStreamSample stores sound samples loaded from [code].wav[/code] files. To play the stored sound use an [AudioStreamPlayer] (for background music) or [AudioStreamPlayer2D]/[AudioStreamPlayer3D] (for positional audio). The sound can be looped. + This class can also be used to store dynamically generated PCM audio data. </description> <tutorials> </tutorials> diff --git a/doc/classes/BaseButton.xml b/doc/classes/BaseButton.xml index 08be3ed0f4..6d1a7a8f87 100644 --- a/doc/classes/BaseButton.xml +++ b/doc/classes/BaseButton.xml @@ -29,14 +29,14 @@ <return type="int" enum="BaseButton.DrawMode"> </return> <description> - Return the visual state used to draw the button. This is useful mainly when implementing your own draw code by either overriding _draw() or connecting to "draw" signal. The visual state of the button is defined by the DRAW_* enum. + Returns the visual state used to draw the button. This is useful mainly when implementing your own draw code by either overriding _draw() or connecting to "draw" signal. The visual state of the button is defined by the DRAW_* enum. </description> </method> <method name="is_hovered" qualifiers="const"> <return type="bool"> </return> <description> - Return [code]true[/code] if the mouse has entered the button and has not left it yet. + Returns [code]true[/code] if the mouse has entered the button and has not left it yet. </description> </method> </methods> @@ -57,6 +57,9 @@ <member name="group" type="ButtonGroup" setter="set_button_group" getter="get_button_group"> [ButtonGroup] associated to the button. </member> + <member name="keep_pressed_outside" type="bool" setter="set_keep_pressed_outside" getter="is_keep_pressed_outside"> + If [code]true[/code], the button stays pressed when moving the cursor outside the button while pressing it. Default value: [code]false[/code]. + </member> <member name="pressed" type="bool" setter="set_pressed" getter="is_pressed"> If [code]true[/code], the button's state is pressed. Means the button is pressed down or toggled (if toggle_mode is active). </member> diff --git a/doc/classes/Basis.xml b/doc/classes/Basis.xml index cee3035eab..ae7a3ff323 100644 --- a/doc/classes/Basis.xml +++ b/doc/classes/Basis.xml @@ -57,7 +57,7 @@ <return type="float"> </return> <description> - Return the determinant of the matrix. + Returns the determinant of the matrix. </description> </method> <method name="get_euler"> @@ -91,7 +91,7 @@ <return type="Basis"> </return> <description> - Return the inverse of the matrix. + Returns the inverse of the matrix. </description> </method> <method name="is_equal_approx"> @@ -108,7 +108,7 @@ <return type="Basis"> </return> <description> - Return the orthonormalized version of the matrix (useful to call from time to time to avoid rounding error for orthogonal matrices). This performs a Gram-Schmidt orthonormalization on the basis of the matrix. + Returns the orthonormalized version of the matrix (useful to call from time to time to avoid rounding error for orthogonal matrices). This performs a Gram-Schmidt orthonormalization on the basis of the matrix. </description> </method> <method name="rotated"> @@ -173,7 +173,7 @@ <return type="Basis"> </return> <description> - Return the transposed version of the matrix. + Returns the transposed version of the matrix. </description> </method> <method name="xform"> @@ -182,7 +182,7 @@ <argument index="0" name="v" type="Vector3"> </argument> <description> - Return a vector transformed (multiplied) by the matrix. + Returns a vector transformed (multiplied) by the matrix. </description> </method> <method name="xform_inv"> @@ -191,7 +191,7 @@ <argument index="0" name="v" type="Vector3"> </argument> <description> - Return a vector transformed (multiplied) by the transposed matrix. Note that this results in a multiplication by the inverse of the matrix only if it represents a rotation-reflection. + Returns a vector transformed (multiplied) by the transposed matrix. Note that this results in a multiplication by the inverse of the matrix only if it represents a rotation-reflection. </description> </method> </methods> diff --git a/doc/classes/Camera.xml b/doc/classes/Camera.xml index 014df2b72a..cc869d28a2 100644 --- a/doc/classes/Camera.xml +++ b/doc/classes/Camera.xml @@ -18,6 +18,13 @@ If this is the current Camera, remove it from being current. If [code]enable_next[/code] is [code]true[/code], request to make the next Camera current, if any. </description> </method> + <method name="get_camera_rid" qualifiers="const"> + <return type="RID"> + </return> + <description> + Returns the camera's RID from the [VisualServer]. + </description> + </method> <method name="get_camera_transform" qualifiers="const"> <return type="Transform"> </return> @@ -69,8 +76,10 @@ </return> <argument index="0" name="screen_point" type="Vector2"> </argument> + <argument index="1" name="z_depth" type="float" default="0"> + </argument> <description> - Returns the 3D point in worldspace that maps to the given 2D coordinate in the [Viewport] rectangle. + Returns the 3D point in worldspace that maps to the given 2D coordinate in the [Viewport] rectangle on a plane that is the given distance into the scene away from the camera. </description> </method> <method name="project_ray_normal" qualifiers="const"> @@ -196,7 +205,7 @@ Perspective Projection (object's size on the screen becomes smaller when far away). </constant> <constant name="PROJECTION_ORTHOGONAL" value="1" enum="Projection"> - Orthogonal Projection (objects remain the same size on the screen no matter how far away they are). + Orthogonal Projection (objects remain the same size on the screen no matter how far away they are; also known as orthographic projection). </constant> <constant name="PROJECTION_FRUSTUM" value="2" enum="Projection"> </constant> diff --git a/doc/classes/Camera2D.xml b/doc/classes/Camera2D.xml index e5d1649c29..fcc99123d2 100644 --- a/doc/classes/Camera2D.xml +++ b/doc/classes/Camera2D.xml @@ -35,7 +35,7 @@ <return type="Vector2"> </return> <description> - Return the camera position. + Returns the camera position. </description> </method> <method name="get_camera_screen_center" qualifiers="const"> diff --git a/doc/classes/CanvasItem.xml b/doc/classes/CanvasItem.xml index 82a5679172..2426471a49 100644 --- a/doc/classes/CanvasItem.xml +++ b/doc/classes/CanvasItem.xml @@ -4,10 +4,10 @@ Base class of anything 2D. </brief_description> <description> - Base class of anything 2D. Canvas items are laid out in a tree and children inherit and extend the transform of their parent. CanvasItem is extended by [Control], for anything GUI related, and by [Node2D] for anything 2D engine related. - Any CanvasItem can draw. For this, the "update" function must be called, then NOTIFICATION_DRAW will be received on idle time to request redraw. Because of this, canvas items don't need to be redraw on every frame, improving the performance significantly. Several functions for drawing on the CanvasItem are provided (see draw_* functions). They can only be used inside the notification, signal or _draw() overrides function, though. - Canvas items are draw in tree order. By default, children are on top of their parents so a root CanvasItem will be drawn behind everything (this can be changed per item though). - Canvas items can also be hidden (hiding also their subtree). They provide many means for changing standard parameters such as opacity (for it and the subtree) and self opacity, blend mode. + Base class of anything 2D. Canvas items are laid out in a tree; children inherit and extend their parent's transform. CanvasItem is extended by [Control] for anything GUI-related, and by [Node2D] for anything related to the 2D engine. + Any CanvasItem can draw. For this, [method update] must be called, then [constant NOTIFICATION_DRAW] will be received on idle time to request redraw. Because of this, canvas items don't need to be redrawn on every frame, improving the performance significantly. Several functions for drawing on the CanvasItem are provided (see [code]draw_*[/code] functions). However, they can only be used inside the [method Object._notification], signal or [method _draw] virtual functions. + Canvas items are drawn in tree order. By default, children are on top of their parents so a root CanvasItem will be drawn behind everything. This behavior can be changed on a per-item basis. + A CanvasItem can also be hidden, which will also hide its children. It provides many ways to change parameters such as modulation (for itself and its children) and self modulation (only for itself), as well as its blend mode. Ultimately, a transform notification can be requested, which will notify the node that its global position changed in case the parent tree changed. </description> <tutorials> @@ -36,7 +36,7 @@ <argument index="4" name="modulate" type="Color" default="Color( 1, 1, 1, 1 )"> </argument> <description> - Draws a string character using a custom font. Returns the advance, depending on the char width and kerning with an optional next char. + Draws a string character using a custom font. Returns the advance, depending on the character width and kerning with an optional next character. </description> </method> <method name="draw_circle"> @@ -116,7 +116,7 @@ <argument index="3" name="antialiased" type="bool" default="false"> </argument> <description> - Draws multiple, parallel lines with a uniform [code]color[/code] and [code]width[/code] and optional antialiasing. + Draws multiple, parallel lines with a uniform [code]color[/code]. [code]width[/code] and [code]antialiased[/code] are currently not implemented and have no effect. </description> </method> <method name="draw_multiline_colors"> @@ -211,7 +211,7 @@ <argument index="5" name="normal_map" type="Texture" default="null"> </argument> <description> - Draws a custom primitive, 1 point for a point, 2 points for a line, 3 points for a triangle and 4 points for a quad. + Draws a custom primitive. 1 point for a point, 2 points for a line, 3 points for a triangle and 4 points for a quad. </description> </method> <method name="draw_rect"> @@ -308,7 +308,7 @@ <argument index="5" name="normal_map" type="Texture" default="null"> </argument> <description> - Draws a textured rectangle at a given position, optionally modulated by a color. Transpose swaps the x and y coordinates when reading the texture. + Draws a textured rectangle at a given position, optionally modulated by a color. If [code]transpose[/code] is [code]true[/code], the texture will have its X and Y coordinates swapped. </description> </method> <method name="draw_texture_rect_region"> @@ -329,7 +329,7 @@ <argument index="6" name="clip_uv" type="bool" default="true"> </argument> <description> - Draws a textured rectangle region at a given position, optionally modulated by a color. Transpose swaps the x and y coordinates when reading the texture. + Draws a textured rectangle region at a given position, optionally modulated by a color. If [code]transpose[/code] is [code]true[/code], the texture will have its X and Y coordinates swapped. </description> </method> <method name="force_update_transform"> @@ -342,14 +342,14 @@ <return type="RID"> </return> <description> - Return the [RID] of the [World2D] canvas where this item is in. + Returns the [RID] of the [World2D] canvas where this item is in. </description> </method> <method name="get_canvas_item" qualifiers="const"> <return type="RID"> </return> <description> - Return the canvas item RID used by [VisualServer] for this item. + Returns the canvas item RID used by [VisualServer] for this item. </description> </method> <method name="get_canvas_transform" qualifiers="const"> @@ -419,7 +419,7 @@ <return type="void"> </return> <description> - Hide the CanvasItem currently visible. + Hide the CanvasItem if it's currently visible. </description> </method> <method name="is_local_transform_notification_enabled" qualifiers="const"> @@ -433,7 +433,7 @@ <return type="bool"> </return> <description> - Return if set as toplevel. See [method set_as_toplevel]. + Returns [code]true[/code] if the node is set as top-level. See [method set_as_toplevel]. </description> </method> <method name="is_transform_notification_enabled" qualifiers="const"> @@ -474,7 +474,7 @@ <argument index="0" name="enable" type="bool"> </argument> <description> - Sets as top level. This means that it will not inherit transform from parent canvas items. + If [code]enable[/code] is [code]true[/code], the node won't inherit its transform from parent canvas items. </description> </method> <method name="set_notify_local_transform"> @@ -499,14 +499,14 @@ <return type="void"> </return> <description> - Show the CanvasItem currently hidden. For controls that inherit [Popup], the correct way to make them visible is to call one of the multiple popup*() functions instead. + Show the CanvasItem if it's currently hidden. For controls that inherit [Popup], the correct way to make them visible is to call one of the multiple [code]popup*()[/code] functions instead. </description> </method> <method name="update"> <return type="void"> </return> <description> - Queue the CanvasItem for update. [code]NOTIFICATION_DRAW[/code] will be called on idle time to request redraw. + Queue the CanvasItem for update. [constant NOTIFICATION_DRAW] will be called on idle time to request redraw. </description> </method> </methods> @@ -533,7 +533,7 @@ If [code]true[/code], the parent [CanvasItem]'s [member material] property is used as this one's material. Default value: [code]false[/code]. </member> <member name="visible" type="bool" setter="set_visible" getter="is_visible"> - If [code]true[/code], this [CanvasItem] is drawn. Default value: [code]true[/code]. For controls that inherit [Popup], the correct way to make them visible is to call one of the multiple popup*() functions instead. + If [code]true[/code], this [CanvasItem] is drawn. Default value: [code]true[/code]. For controls that inherit [Popup], the correct way to make them visible is to call one of the multiple [code]popup*()[/code] functions instead. </member> </members> <signals> @@ -575,22 +575,22 @@ Mix blending mode. Colors are assumed to be premultiplied by the alpha (opacity) value. </constant> <constant name="BLEND_MODE_DISABLED" value="5" enum="BlendMode"> - Disable blending mode. Colors including alpha are written as is. Only applicable for render targets with a transparent background. No lighting will be applied. + Disable blending mode. Colors including alpha are written as-is. Only applicable for render targets with a transparent background. No lighting will be applied. </constant> <constant name="NOTIFICATION_TRANSFORM_CHANGED" value="2000"> - Canvas item transform has changed. Notification is only received if enabled by [method set_notify_transform] or [method set_notify_local_transform]. + The CanvasItem's transform has changed. This notification is only received if enabled by [method set_notify_transform] or [method set_notify_local_transform]. </constant> <constant name="NOTIFICATION_DRAW" value="30"> - CanvasItem is requested to draw. + The CanvasItem is requested to draw. </constant> <constant name="NOTIFICATION_VISIBILITY_CHANGED" value="31"> - Canvas item visibility has changed. + The CanvasItem's visibility has changed. </constant> <constant name="NOTIFICATION_ENTER_CANVAS" value="32"> - Canvas item has entered the canvas. + The CanvasItem has entered the canvas. </constant> <constant name="NOTIFICATION_EXIT_CANVAS" value="33"> - Canvas item has exited the canvas. + The CanvasItem has exited the canvas. </constant> </constants> </class> diff --git a/doc/classes/CheckButton.xml b/doc/classes/CheckButton.xml index 94e4eececd..04344c1834 100644 --- a/doc/classes/CheckButton.xml +++ b/doc/classes/CheckButton.xml @@ -41,8 +41,12 @@ </theme_item> <theme_item name="off" type="Texture"> </theme_item> + <theme_item name="off_disabled" type="Texture"> + </theme_item> <theme_item name="on" type="Texture"> </theme_item> + <theme_item name="on_disabled" type="Texture"> + </theme_item> <theme_item name="pressed" type="StyleBox"> </theme_item> </theme_items> diff --git a/doc/classes/ClassDB.xml b/doc/classes/ClassDB.xml index b029c85409..ddbe66380a 100644 --- a/doc/classes/ClassDB.xml +++ b/doc/classes/ClassDB.xml @@ -121,7 +121,7 @@ <argument index="1" name="name" type="String"> </argument> <description> - Return whether 'class' or its ancestry has an integer constant called 'name' or not. + Returns whether 'class' or its ancestry has an integer constant called 'name' or not. </description> </method> <method name="class_has_method" qualifiers="const"> @@ -134,7 +134,7 @@ <argument index="2" name="no_inheritance" type="bool" default="false"> </argument> <description> - Return whether 'class' (or its ancestry if 'no_inheritance' is false) has a method called 'method' or not. + Returns whether 'class' (or its ancestry if 'no_inheritance' is false) has a method called 'method' or not. </description> </method> <method name="class_has_signal" qualifiers="const"> @@ -145,7 +145,7 @@ <argument index="1" name="signal" type="String"> </argument> <description> - Return whether 'class' or its ancestry has a signal called 'signal' or not. + Returns whether 'class' or its ancestry has a signal called 'signal' or not. </description> </method> <method name="class_set_property" qualifiers="const"> diff --git a/doc/classes/CollisionObject2D.xml b/doc/classes/CollisionObject2D.xml index 1467812e4d..f847893a39 100644 --- a/doc/classes/CollisionObject2D.xml +++ b/doc/classes/CollisionObject2D.xml @@ -215,7 +215,7 @@ </methods> <members> <member name="input_pickable" type="bool" setter="set_pickable" getter="is_pickable"> - If [code]true[/code], this object is pickable. A pickable object can detect the mouse pointer entering/leaving, and if the mouse is inside it, report input events. + If [code]true[/code], this object is pickable. A pickable object can detect the mouse pointer entering/leaving, and if the mouse is inside it, report input events. Requires at least one [code]collision_layer[/code] bit to be set. </member> </members> <signals> @@ -227,17 +227,17 @@ <argument index="2" name="shape_idx" type="int"> </argument> <description> - Emitted when an input event occurs and [code]input_pickable[/code] is [code]true[/code]. See [method _input_event] for details. + Emitted when an input event occurs. Requires [code]input_pickable[/code] to be [code]true[/code] and at least one [code]collision_layer[/code] bit to be set. See [method _input_event] for details. </description> </signal> <signal name="mouse_entered"> <description> - Emitted when the mouse pointer enters any of this object's shapes. + Emitted when the mouse pointer enters any of this object's shapes. Requires [code]input_pickable[/code] to be [code]true[/code] and at least one [code]collision_layer[/code] bit to be set. </description> </signal> <signal name="mouse_exited"> <description> - Emitted when the mouse pointer exits all this object's shapes. + Emitted when the mouse pointer exits all this object's shapes. Requires [code]input_pickable[/code] to be [code]true[/code] and at least one [code]collision_layer[/code] bit to be set. </description> </signal> </signals> diff --git a/doc/classes/Color.xml b/doc/classes/Color.xml index 9f48f6e018..ab5d7a0a5d 100644 --- a/doc/classes/Color.xml +++ b/doc/classes/Color.xml @@ -566,6 +566,8 @@ </constant> <constant name="tomato" value="Color( 1, 0.39, 0.28, 1 )"> </constant> + <constant name="transparent" value="Color( 1, 1, 1, 0 )"> + </constant> <constant name="turquoise" value="Color( 0.25, 0.88, 0.82, 1 )"> </constant> <constant name="violet" value="Color( 0.93, 0.51, 0.93, 1 )"> diff --git a/doc/classes/ColorPicker.xml b/doc/classes/ColorPicker.xml index d0a81ad8ae..32e6014c75 100644 --- a/doc/classes/ColorPicker.xml +++ b/doc/classes/ColorPicker.xml @@ -31,7 +31,7 @@ <return type="PoolColorArray"> </return> <description> - Return the list of colors in the presets of the color picker. + Returns the list of colors in the presets of the color picker. </description> </method> </methods> @@ -45,6 +45,10 @@ <member name="edit_alpha" type="bool" setter="set_edit_alpha" getter="is_editing_alpha"> If [code]true[/code], shows an alpha channel slider (transparency). </member> + <member name="presets_enabled" type="bool" setter="set_presets_enabled" getter="are_presets_enabled"> + </member> + <member name="presets_visible" type="bool" setter="set_presets_visible" getter="are_presets_visible"> + </member> <member name="raw_mode" type="bool" setter="set_raw_mode" getter="is_raw_mode"> If [code]true[/code], allows the color R, G, B component values to go beyond 1.0, which can be used for certain special operations that require it (like tinting without darkening or rendering sprites in HDR). </member> diff --git a/doc/classes/ConcavePolygonShape.xml b/doc/classes/ConcavePolygonShape.xml index afc6ce74a5..62d42f4eb4 100644 --- a/doc/classes/ConcavePolygonShape.xml +++ b/doc/classes/ConcavePolygonShape.xml @@ -13,7 +13,7 @@ <return type="PoolVector3Array"> </return> <description> - Return the faces (an array of triangles). + Returns the faces (an array of triangles). </description> </method> <method name="set_faces"> diff --git a/doc/classes/ConfirmationDialog.xml b/doc/classes/ConfirmationDialog.xml index f39915f4b7..6124bc29b0 100644 --- a/doc/classes/ConfirmationDialog.xml +++ b/doc/classes/ConfirmationDialog.xml @@ -13,7 +13,7 @@ <return type="Button"> </return> <description> - Return the cancel button. + Returns the cancel button. </description> </method> </methods> diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index f7fbdf08ed..ec9d5bc3dc 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -4,7 +4,7 @@ All User Interface nodes inherit from Control. A control's anchors and margins adapt its position and size relative to its parent. </brief_description> <description> - Base class for all User Interface or [i]UI[/i] related nodes. [Control] features a bounding rectangle that defines its extents, an anchor position relative to its parent and margins that represent an offset to the anchor. The margins update automatically when the node, any of its parents, or the screen size change. + Base class for all User Interface or [i]UI[/i] related nodes. [Control] features a bounding rectangle that defines its extents, an anchor position relative to its parent control or the current viewport, and margins that represent an offset to the anchor. The margins update automatically when the node, any of its parents, or the screen size change. For more information on Godot's UI system, anchors, margins, and containers, see the related tutorials in the manual. To build flexible UIs, you'll need a mix of UI elements that inherit from [Control] and [Container] nodes. [b]User Interface nodes and input[/b] Godot sends input events to the scene's root node first, by calling [method Node._input]. [method Node._input] forwards the event down the node tree to the nodes under the mouse cursor, or on keyboard focus. To do so, it calls [method MainLoop._input_event]. Call [method accept_event] so no other node receives the event. Once you accepted an input, it becomes handled so [method Node._unhandled_input] will not process it. @@ -221,7 +221,7 @@ <argument index="0" name="position" type="Vector2"> </argument> <description> - Godot calls this method to get data that can be dragged and dropped onto controls that expect drop data. Return null if there is no data to drag. Controls that want to receive drop data should implement [method can_drop_data] and [method drop_data]. [code]position[/code] is local to this control. Drag may be forced with [method force_drag]. + Godot calls this method to get data that can be dragged and dropped onto controls that expect drop data. Returns null if there is no data to drag. Controls that want to receive drop data should implement [method can_drop_data] and [method drop_data]. [code]position[/code] is local to this control. Drag may be forced with [method force_drag]. A preview that will follow the mouse that should represent the data can be set with [method set_drag_preview]. A good time to set the preview is in this method. [codeblock] extends Control @@ -512,7 +512,7 @@ </return> <argument index="0" name="preset" type="int" enum="Control.LayoutPreset"> </argument> - <argument index="1" name="keep_margin" type="bool" default="false"> + <argument index="1" name="keep_margins" type="bool" default="false"> </argument> <description> </description> @@ -574,6 +574,16 @@ Sets [member margin_right] and [member margin_bottom] at the same time. </description> </method> + <method name="set_global_position"> + <return type="void"> + </return> + <argument index="0" name="position" type="Vector2"> + </argument> + <argument index="1" name="keep_margins" type="bool" default="false"> + </argument> + <description> + </description> + </method> <method name="set_margins_preset"> <return type="void"> </return> @@ -586,6 +596,16 @@ <description> </description> </method> + <method name="set_position"> + <return type="void"> + </return> + <argument index="0" name="position" type="Vector2"> + </argument> + <argument index="1" name="keep_margins" type="bool" default="false"> + </argument> + <description> + </description> + </method> <method name="set_rotation"> <return type="void"> </return> @@ -595,6 +615,16 @@ Sets the rotation (in radians). </description> </method> + <method name="set_size"> + <return type="void"> + </return> + <argument index="0" name="size" type="Vector2"> + </argument> + <argument index="1" name="keep_margins" type="bool" default="false"> + </argument> + <description> + </description> + </method> <method name="show_modal"> <return type="void"> </return> diff --git a/doc/classes/CubeMesh.xml b/doc/classes/CubeMesh.xml index 814c2f21c1..6162474ed1 100644 --- a/doc/classes/CubeMesh.xml +++ b/doc/classes/CubeMesh.xml @@ -5,6 +5,7 @@ </brief_description> <description> Generate an axis-aligned cuboid [PrimitiveMesh]. + The cube's UV layout is arranged in a 3×2 layout that allows texturing each face individually. To apply the same texture on all faces, change the material's UV property to [code]Vector3(3, 2, 1)[/code]. </description> <tutorials> </tutorials> diff --git a/doc/classes/CylinderMesh.xml b/doc/classes/CylinderMesh.xml index fa0a3bf412..dbdc7aeb92 100644 --- a/doc/classes/CylinderMesh.xml +++ b/doc/classes/CylinderMesh.xml @@ -4,7 +4,7 @@ Class representing a cylindrical [PrimitiveMesh]. </brief_description> <description> - Class representing a cylindrical [PrimitiveMesh]. + Class representing a cylindrical [PrimitiveMesh]. This class can be used to create cones by setting either the [member top_radius] or [member bottom_radius] properties to 0.0. </description> <tutorials> </tutorials> diff --git a/doc/classes/Dictionary.xml b/doc/classes/Dictionary.xml index f47649363e..ec70fd311b 100644 --- a/doc/classes/Dictionary.xml +++ b/doc/classes/Dictionary.xml @@ -38,7 +38,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if the dictionary is empty. + Returns [code]true[/code] if the dictionary is empty. </description> </method> <method name="erase"> @@ -47,7 +47,7 @@ <argument index="0" name="key" type="Variant"> </argument> <description> - Erase a dictionary key/value pair by key. Do not erase elements while iterating over the dictionary. + Erase a dictionary key/value pair by key. Returns [code]true[/code] if the given key was present in the dictionary, [code]false[/code] otherwise. Do not erase elements while iterating over the dictionary. </description> </method> <method name="get"> @@ -67,7 +67,7 @@ <argument index="0" name="key" type="Variant"> </argument> <description> - Return [code]true[/code] if the dictionary has a given key. + Returns [code]true[/code] if the dictionary has a given key. </description> </method> <method name="has_all"> @@ -76,35 +76,35 @@ <argument index="0" name="keys" type="Array"> </argument> <description> - Return [code]true[/code] if the dictionary has all of the keys in the given array. + Returns [code]true[/code] if the dictionary has all of the keys in the given array. </description> </method> <method name="hash"> <return type="int"> </return> <description> - Return a hashed integer value representing the dictionary contents. + Returns a hashed integer value representing the dictionary contents. </description> </method> <method name="keys"> <return type="Array"> </return> <description> - Return the list of keys in the [Dictionary]. + Returns the list of keys in the [Dictionary]. </description> </method> <method name="size"> <return type="int"> </return> <description> - Return the size of the dictionary (in pairs). + Returns the size of the dictionary (in pairs). </description> </method> <method name="values"> <return type="Array"> </return> <description> - Return the list of values in the [Dictionary]. + Returns the list of values in the [Dictionary]. </description> </method> </methods> diff --git a/doc/classes/Directory.xml b/doc/classes/Directory.xml index 8a81695198..54aac33652 100644 --- a/doc/classes/Directory.xml +++ b/doc/classes/Directory.xml @@ -52,7 +52,7 @@ <return type="bool"> </return> <description> - Return whether the current item processed with the last [method get_next] call is a directory ([code].[/code] and [code]..[/code] are considered directories). + Returns whether the current item processed with the last [method get_next] call is a directory ([code].[/code] and [code]..[/code] are considered directories). </description> </method> <method name="dir_exists"> @@ -61,7 +61,7 @@ <argument index="0" name="path" type="String"> </argument> <description> - Return whether the target directory exists. The argument can be relative to the current directory, or an absolute path. + Returns whether the target directory exists. The argument can be relative to the current directory, or an absolute path. </description> </method> <method name="file_exists"> @@ -70,14 +70,14 @@ <argument index="0" name="path" type="String"> </argument> <description> - Return whether the target file exists. The argument can be relative to the current directory, or an absolute path. + Returns whether the target file exists. The argument can be relative to the current directory, or an absolute path. </description> </method> <method name="get_current_dir"> <return type="String"> </return> <description> - Return the absolute path to the currently opened directory (e.g. [code]res://folder[/code] or [code]C:\tmp\folder[/code]). + Returns the absolute path to the currently opened directory (e.g. [code]res://folder[/code] or [code]C:\tmp\folder[/code]). </description> </method> <method name="get_current_drive"> @@ -107,7 +107,7 @@ <return type="String"> </return> <description> - Return the next element (file or directory) in the current directory (including [code].[/code] and [code]..[/code], unless [code]skip_navigational[/code] was given to [method list_dir_begin]). + Returns the next element (file or directory) in the current directory (including [code].[/code] and [code]..[/code], unless [code]skip_navigational[/code] was given to [method list_dir_begin]). The name of the file or directory is returned (and not its full path). Once the stream has been fully processed, the method returns an empty String and closes the stream automatically (i.e. [method list_dir_end] would not be mandatory in such a case). </description> </method> @@ -155,7 +155,7 @@ </argument> <description> Create a target directory and all necessary intermediate directories in its path, by calling [method make_dir] recursively. The argument can be relative to the current directory, or an absolute path. - Return one of the error code constants defined in [@GlobalScope] (OK, FAILED or ERR_*). + Returns one of the error code constants defined in [@GlobalScope] (OK, FAILED or ERR_*). </description> </method> <method name="open"> @@ -175,7 +175,7 @@ </argument> <description> Delete the target file or an empty directory. The argument can be relative to the current directory, or an absolute path. If the target directory is not empty, the operation will fail. - Return one of the error code constants defined in [@GlobalScope] (OK or FAILED). + Returns one of the error code constants defined in [@GlobalScope] (OK or FAILED). </description> </method> <method name="rename"> @@ -187,7 +187,7 @@ </argument> <description> Rename (move) the [i]from[/i] file to the [i]to[/i] destination. Both arguments should be paths to files, either relative or absolute. If the destination file exists and is not access-protected, it will be overwritten. - Return one of the error code constants defined in [@GlobalScope] (OK or FAILED). + Returns one of the error code constants defined in [@GlobalScope] (OK or FAILED). </description> </method> </methods> diff --git a/doc/classes/EditorExportPlugin.xml b/doc/classes/EditorExportPlugin.xml index 998b05d495..4e4e29dc4e 100644 --- a/doc/classes/EditorExportPlugin.xml +++ b/doc/classes/EditorExportPlugin.xml @@ -21,6 +21,12 @@ <description> </description> </method> + <method name="_export_end" qualifiers="virtual"> + <return type="void"> + </return> + <description> + </description> + </method> <method name="_export_file" qualifiers="virtual"> <return type="void"> </return> diff --git a/doc/classes/EditorFileSystem.xml b/doc/classes/EditorFileSystem.xml index 531af4c4e0..1c7a68fc0b 100644 --- a/doc/classes/EditorFileSystem.xml +++ b/doc/classes/EditorFileSystem.xml @@ -38,14 +38,14 @@ <return type="float"> </return> <description> - Return the scan progress for 0 to 1 if the FS is being scanned. + Returns the scan progress for 0 to 1 if the FS is being scanned. </description> </method> <method name="is_scanning" qualifiers="const"> <return type="bool"> </return> <description> - Return [code]true[/code] of the filesystem is being scanned. + Returns [code]true[/code] of the filesystem is being scanned. </description> </method> <method name="scan"> diff --git a/doc/classes/EditorInspectorPlugin.xml b/doc/classes/EditorInspectorPlugin.xml index f2dcd2177c..c2b13ff89e 100644 --- a/doc/classes/EditorInspectorPlugin.xml +++ b/doc/classes/EditorInspectorPlugin.xml @@ -21,7 +21,7 @@ <argument index="0" name="control" type="Control"> </argument> <description> - Add a custom control, not necesarily a property editor. + Add a custom control, not necessarily a property editor. </description> </method> <method name="add_property_editor"> @@ -54,7 +54,7 @@ <argument index="0" name="object" type="Object"> </argument> <description> - Return true if this object can be handled by this plugin. + Returns true if this object can be handled by this plugin. </description> </method> <method name="parse_begin" qualifiers="virtual"> diff --git a/doc/classes/EditorNavigationMeshGenerator.xml b/doc/classes/EditorNavigationMeshGenerator.xml new file mode 100644 index 0000000000..3956e12509 --- /dev/null +++ b/doc/classes/EditorNavigationMeshGenerator.xml @@ -0,0 +1,31 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="EditorNavigationMeshGenerator" inherits="Object" category="Core" version="3.2"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + <method name="bake"> + <return type="void"> + </return> + <argument index="0" name="nav_mesh" type="NavigationMesh"> + </argument> + <argument index="1" name="root_node" type="Node"> + </argument> + <description> + </description> + </method> + <method name="clear"> + <return type="void"> + </return> + <argument index="0" name="nav_mesh" type="NavigationMesh"> + </argument> + <description> + </description> + </method> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/EditorPlugin.xml b/doc/classes/EditorPlugin.xml index 7981c90f86..3d91bff0aa 100644 --- a/doc/classes/EditorPlugin.xml +++ b/doc/classes/EditorPlugin.xml @@ -241,7 +241,7 @@ <return type="EditorInterface"> </return> <description> - Return the [EditorInterface] object that gives you control over Godot editor's window and its functionalities. + Returns the [EditorInterface] object that gives you control over Godot editor's window and its functionalities. </description> </method> <method name="get_plugin_icon" qualifiers="virtual"> @@ -299,7 +299,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if this is a main screen editor plugin (it goes in the workspaces selector together with '2D', '3D', and 'Script'). + Returns [code]true[/code] if this is a main screen editor plugin (it goes in the workspaces selector together with '2D', '3D', and 'Script'). </description> </method> <method name="hide_bottom_panel"> @@ -471,6 +471,7 @@ <return type="int"> </return> <description> + Updates the overlays of the editor (2D/3D) viewport. </description> </method> </methods> @@ -524,6 +525,10 @@ </constant> <constant name="CONTAINER_PROPERTY_EDITOR_BOTTOM" value="9" enum="CustomControlContainer"> </constant> + <constant name="CONTAINER_PROJECT_SETTING_TAB_LEFT" value="10" enum="CustomControlContainer"> + </constant> + <constant name="CONTAINER_PROJECT_SETTING_TAB_RIGHT" value="11" enum="CustomControlContainer"> + </constant> <constant name="DOCK_SLOT_LEFT_UL" value="0" enum="DockSlot"> </constant> <constant name="DOCK_SLOT_LEFT_BL" value="1" enum="DockSlot"> diff --git a/doc/classes/EditorResourcePreviewGenerator.xml b/doc/classes/EditorResourcePreviewGenerator.xml index 6592ffd1a8..156cc62941 100644 --- a/doc/classes/EditorResourcePreviewGenerator.xml +++ b/doc/classes/EditorResourcePreviewGenerator.xml @@ -9,6 +9,14 @@ <tutorials> </tutorials> <methods> + <method name="can_generate_small_preview" qualifiers="virtual"> + <return type="bool"> + </return> + <description> + If this function returns true the generator will call [method generate] or [method generate_from_path] for small previews too. + By default it returns false. + </description> + </method> <method name="generate" qualifiers="virtual"> <return type="Texture"> </return> @@ -35,13 +43,21 @@ Care must be taken because this function is always called from a thread (not the main thread). </description> </method> + <method name="generate_small_preview_automatically" qualifiers="virtual"> + <return type="bool"> + </return> + <description> + If this function returns true the generator will automatically generate the small previews from the normal preview texture generated by the methods [method generate] or [method generate_from_path]. + By default it returns false. + </description> + </method> <method name="handles" qualifiers="virtual"> <return type="bool"> </return> <argument index="0" name="type" type="String"> </argument> <description> - Return if your generator supports this resource type. + Returns if your generator supports this resource type. </description> </method> </methods> diff --git a/doc/classes/EditorSpatialGizmo.xml b/doc/classes/EditorSpatialGizmo.xml index da7fee1cf7..5d5c37b212 100644 --- a/doc/classes/EditorSpatialGizmo.xml +++ b/doc/classes/EditorSpatialGizmo.xml @@ -123,7 +123,7 @@ <return type="EditorSpatialGizmoPlugin"> </return> <description> - Return the [EditorSpatialGizmoPlugin] that owns this gizmo. It's useful to retrieve materials using [method EditorSpatialGizmoPlugin.get_material]. + Returns the [EditorSpatialGizmoPlugin] that owns this gizmo. It's useful to retrieve materials using [method EditorSpatialGizmoPlugin.get_material]. </description> </method> <method name="get_spatial_node" qualifiers="const"> diff --git a/doc/classes/FileDialog.xml b/doc/classes/FileDialog.xml index 66e6fa5314..953f364bdb 100644 --- a/doc/classes/FileDialog.xml +++ b/doc/classes/FileDialog.xml @@ -43,7 +43,7 @@ <return type="VBoxContainer"> </return> <description> - Return the vertical box container of the dialog, custom controls can be added to it. + Returns the vertical box container of the dialog, custom controls can be added to it. </description> </method> <method name="invalidate"> diff --git a/doc/classes/Font.xml b/doc/classes/Font.xml index bd189928b0..d65dad9fe1 100644 --- a/doc/classes/Font.xml +++ b/doc/classes/Font.xml @@ -51,21 +51,21 @@ <return type="float"> </return> <description> - Return the font ascent (number of pixels above the baseline). + Returns the font ascent (number of pixels above the baseline). </description> </method> <method name="get_descent" qualifiers="const"> <return type="float"> </return> <description> - Return the font descent (number of pixels below the baseline). + Returns the font descent (number of pixels below the baseline). </description> </method> <method name="get_height" qualifiers="const"> <return type="float"> </return> <description> - Return the total font height (ascent plus descent) in pixels. + Returns the total font height (ascent plus descent) in pixels. </description> </method> <method name="get_string_size" qualifiers="const"> @@ -74,7 +74,17 @@ <argument index="0" name="string" type="String"> </argument> <description> - Return the size of a string, taking kerning and advance into account. + Returns the size of a string, taking kerning and advance into account. + </description> + </method> + <method name="get_wordwrap_string_size" qualifiers="const"> + <return type="Vector2"> + </return> + <argument index="0" name="string" type="String"> + </argument> + <argument index="1" name="p_width" type="float"> + </argument> + <description> </description> </method> <method name="has_outline" qualifiers="const"> diff --git a/doc/classes/FuncRef.xml b/doc/classes/FuncRef.xml index 3f84316503..e35d7a68c5 100644 --- a/doc/classes/FuncRef.xml +++ b/doc/classes/FuncRef.xml @@ -17,6 +17,12 @@ Calls the referenced function previously set by [method set_function] or [method @GDScript.funcref]. </description> </method> + <method name="is_valid" qualifiers="const"> + <return type="bool"> + </return> + <description> + </description> + </method> <method name="set_function"> <return type="void"> </return> diff --git a/doc/classes/Geometry.xml b/doc/classes/Geometry.xml index 68539d7ecb..e2ba3fb7b0 100644 --- a/doc/classes/Geometry.xml +++ b/doc/classes/Geometry.xml @@ -59,6 +59,29 @@ Clips the polygon defined by the points in [code]points[/code] against the [code]plane[/code] and returns the points of the clipped polygon. </description> </method> + <method name="clip_polygons_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon_a" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon_b" type="PoolVector2Array"> + </argument> + <description> + Clips [code]polygon_a[/code] against [code]polygon_b[/code] and returns an array of clipped polygons. This performs [code]OPERATION_DIFFERENCE[/code] between polygons. Returns an empty array if [code]polygon_b[/code] completely overlaps [code]polygon_a[/code]. + If [code]polygon_b[/code] is enclosed by [code]polygon_a[/code], returns an outer polygon (boundary) and inner polygon (hole) which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> + <method name="clip_polyline_with_polygon_2d"> + <return type="Array"> + </return> + <argument index="0" name="polyline" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon" type="PoolVector2Array"> + </argument> + <description> + Clips [code]polyline[/code] against [code]polygon[/code] and returns an array of clipped polylines. This performs [code]OPERATION_DIFFERENCE[/code] between the polyline and the polygon. This operation can be thought of as cutting a line with a closed shape. + </description> + </method> <method name="convex_hull_2d"> <return type="PoolVector2Array"> </return> @@ -68,6 +91,18 @@ Given an array of [Vector2]s, returns the convex hull as a list of points in counter-clockwise order. The last point is the same as the first one. </description> </method> + <method name="exclude_polygons_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon_a" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon_b" type="PoolVector2Array"> + </argument> + <description> + Mutually excludes common area defined by intersection of [code]polygon_a[/code] and [code]polygon_b[/code] (see [method intersect_polygons_2d]) and returns an array of excluded polygons. This performs [code]OPERATION_XOR[/code] between polygons. In other words, returns all but common area between polygons. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> <method name="get_closest_point_to_segment"> <return type="Vector3"> </return> @@ -158,6 +193,38 @@ <description> </description> </method> + <method name="intersect_polygons_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon_a" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon_b" type="PoolVector2Array"> + </argument> + <description> + Intersects [code]polygon_a[/code] with [code]polygon_b[/code] and returns an array of intersected polygons. This performs [code]OPERATION_INTERSECTION[/code] between polygons. In other words, returns common area shared by polygons. Returns an empty array if no intersection occurs. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> + <method name="intersect_polyline_with_polygon_2d"> + <return type="Array"> + </return> + <argument index="0" name="polyline" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon" type="PoolVector2Array"> + </argument> + <description> + Intersects [code]polyline[/code] with [code]polygon[/code] and returns an array of intersected polylines. This performs [code]OPERATION_INTERSECTION[/code] between the polyline and the polygon. This operation can be thought of as chopping a line with a closed shape. + </description> + </method> + <method name="is_polygon_clockwise"> + <return type="bool"> + </return> + <argument index="0" name="polygon" type="PoolVector2Array"> + </argument> + <description> + Returns [code]true[/code] if [code]polygon[/code]'s vertices are ordered in clockwise order, otherwise returns [code]false[/code]. + </description> + </method> <method name="line_intersects_line_2d"> <return type="Variant"> </return> @@ -182,6 +249,51 @@ Given an array of [Vector2]s representing tiles, builds an atlas. The returned dictionary has two keys: [code]points[/code] is a vector of [Vector2] that specifies the positions of each tile, [code]size[/code] contains the overall size of the whole atlas as [Vector2]. </description> </method> + <method name="merge_polygons_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon_a" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon_b" type="PoolVector2Array"> + </argument> + <description> + Merges (combines) [code]polygon_a[/code] and [code]polygon_b[/code] and returns an array of merged polygons. This performs [code]OPERATION_UNION[/code] between polygons. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> + <method name="offset_polygon_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon" type="PoolVector2Array"> + </argument> + <argument index="1" name="delta" type="float"> + </argument> + <argument index="2" name="join_type" type="int" enum="Geometry.PolyJoinType" default="0"> + </argument> + <description> + Inflates or deflates [code]polygon[/code] by [code]delta[/code] units (pixels). If [code]delta[/code] is positive, makes the polygon grow outward. If [code]delta[/code] is negative, shrinks the polygon inward. Returns an array of polygons because inflating/deflating may result in multiple discrete polygons. Returns an empty array if [code]delta[/code] is negative and the absolute value of it approximately exceeds the minimum bounding rectangle dimensions of the polygon. + Each polygon's vertices will be rounded as determined by [code]join_type[/code], see [enum Geometry.PolyJoinType]. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> + <method name="offset_polyline_2d"> + <return type="Array"> + </return> + <argument index="0" name="polyline" type="PoolVector2Array"> + </argument> + <argument index="1" name="delta" type="float"> + </argument> + <argument index="2" name="join_type" type="int" enum="Geometry.PolyJoinType" default="0"> + </argument> + <argument index="3" name="end_type" type="int" enum="Geometry.PolyEndType" default="3"> + </argument> + <description> + Inflates or deflates [code]polyline[/code] by [code]delta[/code] units (pixels), producing polygons. If [code]delta[/code] is positive, makes the polyline grow outward. Returns an array of polygons because inflating/deflating may result in multiple discrete polygons. If [code]delta[/code] is negative, returns an empty array. + Each polygon's vertices will be rounded as determined by [code]join_type[/code], see [enum Geometry.PolyJoinType]. + Each polygon's endpoints will be rounded as determined by [code]end_type[/code], see [enum Geometry.PolyEndType]. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> <method name="point_is_inside_triangle" qualifiers="const"> <return type="bool"> </return> @@ -304,6 +416,27 @@ Tests if the segment ([code]from[/code], [code]to[/code]) intersects the triangle [code]a[/code], [code]b[/code], [code]c[/code]. If yes, returns the point of intersection as [Vector3]. If no intersection takes place, an empty [Variant] is returned. </description> </method> + <method name="transform_points_2d"> + <return type="PoolVector2Array"> + </return> + <argument index="0" name="points" type="PoolVector2Array"> + </argument> + <argument index="1" name="transform" type="Transform2D"> + </argument> + <description> + Transforms an array of points by [code]transform[/code] and returns the result. + Can be useful in conjuction with performing polygon boolean operations in CSG manner, see [method merge_polygons_2d], [method clip_polygons_2d], [method intersect_polygons_2d], [method exclude_polygons_2d]. + </description> + </method> + <method name="triangulate_delaunay_2d"> + <return type="PoolIntArray"> + </return> + <argument index="0" name="points" type="PoolVector2Array"> + </argument> + <description> + Triangulates the area specified by discrete set of [code]points[/code] such that no point is inside the circumcircle of any resulting triangle. Returns a [PoolIntArray] where each triangle consists of three consecutive point indices into [code]points[/code] (i.e. the returned array will have [code]n * 3[/code] elements, with [code]n[/code] being the number of found triangles). If the triangulation did not succeed, an empty [PoolIntArray] is returned. + </description> + </method> <method name="triangulate_polygon"> <return type="PoolIntArray"> </return> @@ -315,5 +448,41 @@ </method> </methods> <constants> + <constant name="OPERATION_UNION" value="0" enum="PolyBooleanOperation"> + Create regions where either subject or clip polygons (or both) are filled. + </constant> + <constant name="OPERATION_DIFFERENCE" value="1" enum="PolyBooleanOperation"> + Create regions where subject polygons are filled except where clip polygons are filled. + </constant> + <constant name="OPERATION_INTERSECTION" value="2" enum="PolyBooleanOperation"> + Create regions where both subject and clip polygons are filled. + </constant> + <constant name="OPERATION_XOR" value="3" enum="PolyBooleanOperation"> + Create regions where either subject or clip polygons are filled but not where both are filled. + </constant> + <constant name="JOIN_SQUARE" value="0" enum="PolyJoinType"> + Squaring is applied uniformally at all convex edge joins at [code]1 * delta[/code]. + </constant> + <constant name="JOIN_ROUND" value="1" enum="PolyJoinType"> + While flattened paths can never perfectly trace an arc, they are approximated by a series of arc chords. + </constant> + <constant name="JOIN_MITER" value="2" enum="PolyJoinType"> + There's a necessary limit to mitered joins since offsetting edges that join at very acute angles will produce excessively long and narrow 'spikes'. For any given edge join, when miter offsetting would exceed that maximum distance, 'square' joining is applied. + </constant> + <constant name="END_POLYGON" value="0" enum="PolyEndType"> + Endpoints are joined using the [enum PolyJoinType] value and the path filled as a polygon. + </constant> + <constant name="END_JOINED" value="1" enum="PolyEndType"> + Endpoints are joined using the [enum PolyJoinType] value and the path filled as a polyline. + </constant> + <constant name="END_BUTT" value="2" enum="PolyEndType"> + Endpoints are squared off with no extension. + </constant> + <constant name="END_SQUARE" value="3" enum="PolyEndType"> + Endpoints are squared off and extended by [code]delta[/code] units. + </constant> + <constant name="END_ROUND" value="4" enum="PolyEndType"> + Endpoints are rounded off and extended by [code]delta[/code] units. + </constant> </constants> </class> diff --git a/doc/classes/GeometryInstance.xml b/doc/classes/GeometryInstance.xml index 6a89d81aa0..674f786149 100644 --- a/doc/classes/GeometryInstance.xml +++ b/doc/classes/GeometryInstance.xml @@ -9,6 +9,15 @@ <tutorials> </tutorials> <methods> + <method name="set_custom_aabb"> + <return type="void"> + </return> + <argument index="0" name="aabb" type="AABB"> + </argument> + <description> + Overrides the bounding box of this node with a custom one. To remove it, set an AABB with all fields set to zero. + </description> + </method> </methods> <members> <member name="cast_shadow" type="int" setter="set_cast_shadows_setting" getter="get_cast_shadows_setting" enum="GeometryInstance.ShadowCastingSetting"> diff --git a/doc/classes/GraphEdit.xml b/doc/classes/GraphEdit.xml index 145cd243bc..db186eab35 100644 --- a/doc/classes/GraphEdit.xml +++ b/doc/classes/GraphEdit.xml @@ -80,7 +80,7 @@ <return type="Array"> </return> <description> - Return an Array containing the list of connections. A connection consists in a structure of the form {from_port: 0, from: "GraphNode name 0", to_port: 1, to: "GraphNode name 1" } + Returns an Array containing the list of connections. A connection consists in a structure of the form {from_port: 0, from: "GraphNode name 0", to_port: 1, to: "GraphNode name 1" } </description> </method> <method name="get_zoom_hbox"> @@ -101,7 +101,7 @@ <argument index="3" name="to_port" type="int"> </argument> <description> - Return [code]true[/code] if the 'from_port' slot of 'from' GraphNode is connected to the 'to_port' slot of 'to' GraphNode. + Returns [code]true[/code] if the 'from_port' slot of 'from' GraphNode is connected to the 'to_port' slot of 'to' GraphNode. </description> </method> <method name="is_valid_connection_type" qualifiers="const"> diff --git a/doc/classes/GraphNode.xml b/doc/classes/GraphNode.xml index 4d6f3180d0..a19676798b 100644 --- a/doc/classes/GraphNode.xml +++ b/doc/classes/GraphNode.xml @@ -31,14 +31,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the color of the input connection 'idx'. + Returns the color of the input connection 'idx'. </description> </method> <method name="get_connection_input_count"> <return type="int"> </return> <description> - Return the number of enabled input slots (connections) to the GraphNode. + Returns the number of enabled input slots (connections) to the GraphNode. </description> </method> <method name="get_connection_input_position"> @@ -47,7 +47,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the position of the input connection 'idx'. + Returns the position of the input connection 'idx'. </description> </method> <method name="get_connection_input_type"> @@ -56,7 +56,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the type of the input connection 'idx'. + Returns the type of the input connection 'idx'. </description> </method> <method name="get_connection_output_color"> @@ -65,14 +65,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the color of the output connection 'idx'. + Returns the color of the output connection 'idx'. </description> </method> <method name="get_connection_output_count"> <return type="int"> </return> <description> - Return the number of enabled output slots (connections) of the GraphNode. + Returns the number of enabled output slots (connections) of the GraphNode. </description> </method> <method name="get_connection_output_position"> @@ -81,7 +81,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the position of the output connection 'idx'. + Returns the position of the output connection 'idx'. </description> </method> <method name="get_connection_output_type"> @@ -90,7 +90,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the type of the output connection 'idx'. + Returns the type of the output connection 'idx'. </description> </method> <method name="get_slot_color_left" qualifiers="const"> @@ -99,7 +99,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the color set to 'idx' left (input) slot. + Returns the color set to 'idx' left (input) slot. </description> </method> <method name="get_slot_color_right" qualifiers="const"> @@ -108,7 +108,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the color set to 'idx' right (output) slot. + Returns the color set to 'idx' right (output) slot. </description> </method> <method name="get_slot_type_left" qualifiers="const"> @@ -117,7 +117,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the (integer) type of left (input) 'idx' slot. + Returns the (integer) type of left (input) 'idx' slot. </description> </method> <method name="get_slot_type_right" qualifiers="const"> @@ -126,7 +126,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the (integer) type of right (output) 'idx' slot. + Returns the (integer) type of right (output) 'idx' slot. </description> </method> <method name="is_slot_enabled_left" qualifiers="const"> @@ -135,7 +135,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return [code]true[/code] if left (input) slot 'idx' is enabled, [code]false[/code] otherwise. + Returns [code]true[/code] if left (input) slot 'idx' is enabled, [code]false[/code] otherwise. </description> </method> <method name="is_slot_enabled_right" qualifiers="const"> @@ -144,7 +144,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return [code]true[/code] if right (output) slot 'idx' is enabled, [code]false[/code] otherwise. + Returns [code]true[/code] if right (output) slot 'idx' is enabled, [code]false[/code] otherwise. </description> </method> <method name="set_slot"> diff --git a/doc/classes/HeightMapShape.xml b/doc/classes/HeightMapShape.xml index 5ffeda1c10..22896535b9 100644 --- a/doc/classes/HeightMapShape.xml +++ b/doc/classes/HeightMapShape.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="HeightMapShape" inherits="Shape" category="Core" version="3.2"> <brief_description> - Height map shape for 3D physics (bullet only) + Height map shape for 3D physics (Bullet only). </brief_description> <description> Height map shape resource, which can be added to a [PhysicsBody] or [Area]. diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml index 641bd64599..8dfabdd884 100644 --- a/doc/classes/Image.xml +++ b/doc/classes/Image.xml @@ -603,6 +603,8 @@ If the image does not have mipmaps, they will be generated and used internally, but no mipmaps will be generated on the resulting image. (Note that if you intend to scale multiple copies of the original image, it's better to call [code]generate_mipmaps[/code] on it in advance, to avoid wasting processing power in generating them again and again.) On the other hand, if the image already has mipmaps, they will be used, and a new set will be generated for the resulting image. </constant> + <constant name="INTERPOLATE_LANCZOS" value="4" enum="Interpolation"> + </constant> <constant name="ALPHA_NONE" value="0" enum="AlphaMode"> </constant> <constant name="ALPHA_BIT" value="1" enum="AlphaMode"> diff --git a/doc/classes/ImageTexture.xml b/doc/classes/ImageTexture.xml index 15ecd4ee6d..e5a8fee767 100644 --- a/doc/classes/ImageTexture.xml +++ b/doc/classes/ImageTexture.xml @@ -40,7 +40,7 @@ <return type="int" enum="Image.Format"> </return> <description> - Return the format of the [ImageTexture], one of [enum Image.Format]. + Returns the format of the [ImageTexture], one of [enum Image.Format]. </description> </method> <method name="load"> diff --git a/doc/classes/Input.xml b/doc/classes/Input.xml index 319f84b8d2..9c41e4bf1d 100644 --- a/doc/classes/Input.xml +++ b/doc/classes/Input.xml @@ -194,7 +194,7 @@ <return type="int" enum="Input.MouseMode"> </return> <description> - Return the mouse mode. See the constants for more information. + Returns the mouse mode. See the constants for more information. </description> </method> <method name="is_action_just_pressed" qualifiers="const"> diff --git a/doc/classes/ItemList.xml b/doc/classes/ItemList.xml index 663eeda77a..ba3a7fe6d8 100644 --- a/doc/classes/ItemList.xml +++ b/doc/classes/ItemList.xml @@ -64,7 +64,7 @@ <return type="int"> </return> <description> - Return count of items currently in the item list. + Returns count of items currently in the item list. </description> </method> <method name="get_item_custom_bg_color" qualifiers="const"> @@ -122,7 +122,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the text for specified item index. + Returns the text for specified item index. </description> </method> <method name="get_item_tooltip" qualifiers="const"> @@ -131,7 +131,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return tooltip hint for specified item index. + Returns tooltip hint for specified item index. </description> </method> <method name="get_selected_items"> diff --git a/doc/classes/KinematicBody2D.xml b/doc/classes/KinematicBody2D.xml index 05a8129cc5..b7ff4bac84 100644 --- a/doc/classes/KinematicBody2D.xml +++ b/doc/classes/KinematicBody2D.xml @@ -9,6 +9,8 @@ Kinematic Characters: KinematicBody2D also has an API for moving objects (the [method move_and_collide] and [method move_and_slide] methods) while performing collision tests. This makes them really useful to implement characters that collide against a world, but that don't require advanced physics. </description> <tutorials> + <link>https://docs.godotengine.org/en/latest/tutorials/physics/kinematic_character_2d.html</link> + <link>https://docs.godotengine.org/en/latest/tutorials/physics/using_kinematic_body_2d.html</link> </tutorials> <methods> <method name="get_floor_velocity" qualifiers="const"> diff --git a/doc/classes/Line2D.xml b/doc/classes/Line2D.xml index 623b23807f..c55760767a 100644 --- a/doc/classes/Line2D.xml +++ b/doc/classes/Line2D.xml @@ -14,8 +14,11 @@ </return> <argument index="0" name="position" type="Vector2"> </argument> + <argument index="1" name="at_position" type="int" default="-1"> + </argument> <description> Add a point at the [code]position[/code]. Appends the point at the end of the line. + If [code]at_position[/code] is given, the point is inserted before the point number [code]at_position[/code], moving that point (and every point after) after the inserted point. If [code]at_position[/code] is not given, or is an illegal value ([code]at_position < 0[/code] or [code]at_position >= [method get_point_count][/code]), the point will be appended at the end of the point list. </description> </method> <method name="clear_points"> diff --git a/doc/classes/LineEdit.xml b/doc/classes/LineEdit.xml index 6ea097ec2f..184987d2dd 100644 --- a/doc/classes/LineEdit.xml +++ b/doc/classes/LineEdit.xml @@ -1,10 +1,19 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="LineEdit" inherits="Control" category="Core" version="3.2"> <brief_description> - Control that provides single line string editing. + Control that provides single-line string editing. </brief_description> <description> - LineEdit provides a single line string editor, used for text fields. + LineEdit provides a single-line string editor, used for text fields. It features many built-in shortcuts which will always be available: + - Ctrl + C: Copy + - Ctrl + X: Cut + - Ctrl + V or Ctrl + Y: Paste/"yank" + - Ctrl + Z: Undo + - Ctrl + Shift + Z: Redo + - Ctrl + U: Delete text from the cursor position to the beginning of the line + - Ctrl + K: Delete text from the cursor position to the end of the line + - Ctrl + A: Select all text + - Up/Down arrow: Move the cursor to the beginning/end of the line </description> <tutorials> </tutorials> @@ -157,6 +166,7 @@ </constant> <constant name="MENU_PASTE" value="2" enum="MenuItems"> Pastes the clipboard text over the selected text (or at the cursor's position). + Non-printable escape characters are automatically stripped from the OS clipboard via [method String.strip_escapes]. </constant> <constant name="MENU_CLEAR" value="3" enum="MenuItems"> Erases the whole [LineEdit] text. diff --git a/doc/classes/Marshalls.xml b/doc/classes/Marshalls.xml index 0d07d8b649..c7118a4d9f 100644 --- a/doc/classes/Marshalls.xml +++ b/doc/classes/Marshalls.xml @@ -15,7 +15,7 @@ <argument index="0" name="base64_str" type="String"> </argument> <description> - Return [PoolByteArray] of a given base64 encoded String. + Returns [PoolByteArray] of a given base64 encoded String. </description> </method> <method name="base64_to_utf8"> @@ -24,7 +24,7 @@ <argument index="0" name="base64_str" type="String"> </argument> <description> - Return utf8 String of a given base64 encoded String. + Returns utf8 String of a given base64 encoded String. </description> </method> <method name="base64_to_variant"> @@ -35,7 +35,7 @@ <argument index="1" name="allow_objects" type="bool" default="false"> </argument> <description> - Return [Variant] of a given base64 encoded String. When [code]allow_objects[/code] is [code]true[/code] decoding objects is allowed. + Returns [Variant] of a given base64 encoded String. When [code]allow_objects[/code] is [code]true[/code] decoding objects is allowed. [b]WARNING:[/b] Deserialized object can contain code which gets executed. Do not use this option if the serialized object comes from untrusted sources to avoid potential security threats (remote code execution). </description> </method> @@ -45,7 +45,7 @@ <argument index="0" name="array" type="PoolByteArray"> </argument> <description> - Return base64 encoded String of a given [PoolByteArray]. + Returns base64 encoded String of a given [PoolByteArray]. </description> </method> <method name="utf8_to_base64"> @@ -54,7 +54,7 @@ <argument index="0" name="utf8_str" type="String"> </argument> <description> - Return base64 encoded String of a given utf8 String. + Returns base64 encoded String of a given utf8 String. </description> </method> <method name="variant_to_base64"> @@ -65,7 +65,7 @@ <argument index="1" name="full_objects" type="bool" default="false"> </argument> <description> - Return base64 encoded String of a given [Variant]. When [code]full_objects[/code] is [code]true[/code] encoding objects is allowed (and can potentially include code). + Returns base64 encoded String of a given [Variant]. When [code]full_objects[/code] is [code]true[/code] encoding objects is allowed (and can potentially include code). </description> </method> </methods> diff --git a/doc/classes/MenuButton.xml b/doc/classes/MenuButton.xml index dadc31b794..1043aa1087 100644 --- a/doc/classes/MenuButton.xml +++ b/doc/classes/MenuButton.xml @@ -13,7 +13,7 @@ <return type="PopupMenu"> </return> <description> - Return the [PopupMenu] contained in this button. + Returns the [PopupMenu] contained in this button. </description> </method> <method name="set_disable_shortcuts"> diff --git a/doc/classes/Mesh.xml b/doc/classes/Mesh.xml index ae035341f6..b8bc5cbd11 100644 --- a/doc/classes/Mesh.xml +++ b/doc/classes/Mesh.xml @@ -50,7 +50,7 @@ <return type="int"> </return> <description> - Return the amount of surfaces that the [Mesh] holds. + Returns the amount of surfaces that the [Mesh] holds. </description> </method> <method name="surface_get_arrays" qualifiers="const"> @@ -77,7 +77,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return a [Material] in a given surface. Surface is rendered using this material. + Returns a [Material] in a given surface. Surface is rendered using this material. </description> </method> </methods> diff --git a/doc/classes/MeshLibrary.xml b/doc/classes/MeshLibrary.xml index de4f6cdf72..ad5824640d 100644 --- a/doc/classes/MeshLibrary.xml +++ b/doc/classes/MeshLibrary.xml @@ -37,7 +37,7 @@ <return type="PoolIntArray"> </return> <description> - Return the list of items. + Returns the list of items. </description> </method> <method name="get_item_mesh" qualifiers="const"> @@ -46,7 +46,7 @@ <argument index="0" name="id" type="int"> </argument> <description> - Return the mesh of the item. + Returns the mesh of the item. </description> </method> <method name="get_item_name" qualifiers="const"> @@ -55,7 +55,7 @@ <argument index="0" name="id" type="int"> </argument> <description> - Return the name of the item. + Returns the name of the item. </description> </method> <method name="get_item_navmesh" qualifiers="const"> diff --git a/doc/classes/MultiMesh.xml b/doc/classes/MultiMesh.xml index 7148871e8c..0784fc3a42 100644 --- a/doc/classes/MultiMesh.xml +++ b/doc/classes/MultiMesh.xml @@ -17,7 +17,7 @@ <return type="AABB"> </return> <description> - Return the visibility AABB. + Returns the visibility AABB. </description> </method> <method name="get_instance_color" qualifiers="const"> @@ -35,7 +35,7 @@ <argument index="0" name="instance" type="int"> </argument> <description> - Return the custom data that has been set for a specific instance. + Returns the custom data that has been set for a specific instance. </description> </method> <method name="get_instance_transform" qualifiers="const"> @@ -44,7 +44,7 @@ <argument index="0" name="instance" type="int"> </argument> <description> - Return the transform of a specific instance. + Returns the [Transform] of a specific instance. </description> </method> <method name="get_instance_transform_2d" qualifiers="const"> @@ -53,6 +53,18 @@ <argument index="0" name="instance" type="int"> </argument> <description> + Returns the [Transform2D] of a specific instance. + </description> + </method> + <method name="set_as_bulk_array"> + <return type="void"> + </return> + <argument index="0" name="array" type="PoolRealArray"> + </argument> + <description> + Set all data related to the instances in one go. This is especially useful when loading the data from disk or preparing the data from GDNative. + All data is packed in one large float array. An array may look like this: Transform for instance 1, color data for instance 1, custom data for instance 1, transform for instance 2, color data for instance 2, etc... + [Transform] is stored as 12 floats, [Transform2D] is stored as 8 floats, COLOR_8BIT / CUSTOM_DATA_8BIT is stored as 1 float (4 bytes as is) and COLOR_FLOAT / CUSTOM_DATA_FLOAT is stored as 4 floats. </description> </method> <method name="set_instance_color"> @@ -86,7 +98,7 @@ <argument index="1" name="transform" type="Transform"> </argument> <description> - Set the transform for a specific instance. + Set the [Transform] for a specific instance. </description> </method> <method name="set_instance_transform_2d"> @@ -97,6 +109,7 @@ <argument index="1" name="transform" type="Transform2D"> </argument> <description> + Set the [Transform2D] for a specific instance. </description> </method> </methods> @@ -108,7 +121,7 @@ Format of custom data in custom data array that gets passed to shader. </member> <member name="instance_count" type="int" setter="set_instance_count" getter="get_instance_count"> - Number of instances that will get drawn. + Number of instances that will get drawn. This clears and (re)sizes the buffers. By default all instances are drawn but you can limit this with [member visible_instance_count]. </member> <member name="mesh" type="Mesh" setter="set_mesh" getter="get_mesh"> Mesh to be drawn. @@ -117,6 +130,7 @@ Format of transform used to transform mesh, either 2D or 3D. </member> <member name="visible_instance_count" type="int" setter="set_visible_instance_count" getter="get_visible_instance_count"> + Limits the number of instances drawn, -1 draws all instances. Changing this does not change the sizes of the buffers. </member> </members> <constants> diff --git a/doc/classes/NavigationMesh.xml b/doc/classes/NavigationMesh.xml index 2788eb053a..79ad7f63ae 100644 --- a/doc/classes/NavigationMesh.xml +++ b/doc/classes/NavigationMesh.xml @@ -29,6 +29,14 @@ <description> </description> </method> + <method name="get_collision_mask_bit" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <description> + </description> + </method> <method name="get_polygon"> <return type="PoolIntArray"> </return> @@ -49,6 +57,16 @@ <description> </description> </method> + <method name="set_collision_mask_bit"> + <return type="void"> + </return> + <argument index="0" name="bit" type="int"> + </argument> + <argument index="1" name="value" type="bool"> + </argument> + <description> + </description> + </method> <method name="set_vertices"> <return type="void"> </return> @@ -85,6 +103,10 @@ </member> <member name="filter/low_hanging_obstacles" type="bool" setter="set_filter_low_hanging_obstacles" getter="get_filter_low_hanging_obstacles"> </member> + <member name="geometry/collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask"> + </member> + <member name="geometry/parsed_geometry_type" type="int" setter="set_parsed_geometry_type" getter="get_parsed_geometry_type"> + </member> <member name="polygon/verts_per_poly" type="float" setter="set_verts_per_poly" getter="get_verts_per_poly"> </member> <member name="region/merge_size" type="float" setter="set_region_merge_size" getter="get_region_merge_size"> @@ -101,5 +123,11 @@ </constant> <constant name="SAMPLE_PARTITION_LAYERS" value="2"> </constant> + <constant name="PARSED_GEOMETRY_MESH_INSTANCES" value="0"> + </constant> + <constant name="PARSED_GEOMETRY_STATIC_COLLIDERS" value="1"> + </constant> + <constant name="PARSED_GEOMETRY_BOTH" value="2"> + </constant> </constants> </class> diff --git a/doc/classes/NodePath.xml b/doc/classes/NodePath.xml index 73739ba79a..554858d895 100644 --- a/doc/classes/NodePath.xml +++ b/doc/classes/NodePath.xml @@ -68,14 +68,14 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if the node path is absolute (not relative). + Returns [code]true[/code] if the node path is absolute (not relative). </description> </method> <method name="is_empty"> <return type="bool"> </return> <description> - Return [code]true[/code] if the node path is empty. + Returns [code]true[/code] if the node path is empty. </description> </method> </methods> diff --git a/doc/classes/OS.xml b/doc/classes/OS.xml index c9c83bc0e0..dd0fcd63e7 100644 --- a/doc/classes/OS.xml +++ b/doc/classes/OS.xml @@ -97,6 +97,8 @@ </argument> <argument index="3" name="output" type="Array" default="[ ]"> </argument> + <argument index="4" name="read_stderr" type="bool" default="false"> + </argument> <description> Execute the file at the given path with the arguments passed as an array of strings. Platform path resolution will take place. The resolved file must exist and be executable. The arguments are used in the given order and separated by a space, so [code]OS.execute('ping', ['-w', '3', 'godotengine.org'], false)[/code] will resolve to [code]ping -w 3 godotengine.org[/code] in the system's shell. @@ -697,7 +699,8 @@ <argument index="0" name="icon" type="Image"> </argument> <description> - Sets the game's icon. + Sets the game's icon using an [Image] resource. + The same image is used for window caption, taskbar/dock and window selection dialog. Image is scaled as needed. </description> </method> <method name="set_ime_active"> @@ -718,6 +721,17 @@ Sets position of IME suggestion list popup (in window coordinates). </description> </method> + <method name="set_native_icon"> + <return type="void"> + </return> + <argument index="0" name="filename" type="String"> + </argument> + <description> + Sets the game's icon using a multi-size platform-specific icon file ([code]*.ico[/code] on Windows and [code]*.icns[/code] on macOS). + Appropriate size sub-icons are used for window caption, taskbar/dock and window selection dialog. + Note: This method is only implemented on macOS and Windows. + </description> + </method> <method name="set_thread_name"> <return type="int" enum="Error"> </return> diff --git a/doc/classes/Object.xml b/doc/classes/Object.xml index 4fe43814d1..dbbd974b04 100644 --- a/doc/classes/Object.xml +++ b/doc/classes/Object.xml @@ -57,6 +57,14 @@ Sets a property. Returns [code]true[/code] if the [code]property[/code] exists. </description> </method> + <method name="_to_string" qualifiers="virtual"> + <return type="String"> + </return> + <description> + Returns a [String] representing the object. Default is [code]"[ClassName:RID]"[/code]. + Override this method to customize the [String] representation of the object when it's being converted to a string, for example: [code]print(obj)[/code]. + </description> + </method> <method name="add_user_signal"> <return type="void"> </return> @@ -327,6 +335,14 @@ <description> </description> </method> + <method name="remove_meta"> + <return type="void"> + </return> + <argument index="0" name="name" type="String"> + </argument> + <description> + </description> + </method> <method name="set"> <return type="void"> </return> @@ -396,6 +412,14 @@ Set a script into the object, scripts extend the object functionality. </description> </method> + <method name="to_string"> + <return type="String"> + </return> + <description> + Returns a [String] representing the object. Default is [code]"[ClassName:RID]"[/code]. + Override the method [method _to_string] to customize the [String] representation. + </description> + </method> <method name="tr" qualifiers="const"> <return type="String"> </return> diff --git a/doc/classes/OptionButton.xml b/doc/classes/OptionButton.xml index 51d2cbc867..1f714656de 100644 --- a/doc/classes/OptionButton.xml +++ b/doc/classes/OptionButton.xml @@ -51,7 +51,7 @@ <return type="int"> </return> <description> - Return the amount of items in the OptionButton. + Returns the amount of items in the OptionButton. </description> </method> <method name="get_item_icon" qualifiers="const"> @@ -60,7 +60,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the icon of the item at index "idx". + Returns the icon of the item at index "idx". </description> </method> <method name="get_item_id" qualifiers="const"> @@ -69,7 +69,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the ID of the item at index [code]idx[/code]. + Returns the ID of the item at index [code]idx[/code]. </description> </method> <method name="get_item_index" qualifiers="const"> @@ -78,7 +78,7 @@ <argument index="0" name="id" type="int"> </argument> <description> - Return the index of the item with the given [code]id[/code]. + Returns the index of the item with the given [code]id[/code]. </description> </method> <method name="get_item_metadata" qualifiers="const"> @@ -95,14 +95,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the text of the item at index "idx". + Returns the text of the item at index "idx". </description> </method> <method name="get_popup" qualifiers="const"> <return type="PopupMenu"> </return> <description> - Return the [PopupMenu] contained in this button. + Returns the [PopupMenu] contained in this button. </description> </method> <method name="get_selected_id" qualifiers="const"> @@ -202,14 +202,14 @@ </members> <signals> <signal name="item_focused"> - <argument index="0" name="ID" type="int"> + <argument index="0" name="id" type="int"> </argument> <description> This signal is emitted when user navigated to an item using [code]ui_up[/code] or [code]ui_down[/code] action. ID of the item selected is passed as argument. </description> </signal> <signal name="item_selected"> - <argument index="0" name="ID" type="int"> + <argument index="0" name="id" type="int"> </argument> <description> This signal is emitted when the current item was changed by the user. Index of the item selected is passed as argument. diff --git a/doc/classes/PacketPeer.xml b/doc/classes/PacketPeer.xml index 5a54c7ba1c..4109d9d462 100644 --- a/doc/classes/PacketPeer.xml +++ b/doc/classes/PacketPeer.xml @@ -13,7 +13,7 @@ <return type="int"> </return> <description> - Return the number of packets currently available in the ring-buffer. + Returns the number of packets currently available in the ring-buffer. </description> </method> <method name="get_packet"> @@ -27,7 +27,7 @@ <return type="int" enum="Error"> </return> <description> - Return the error state of the last packet received (via [method get_packet] and [method get_var]). + Returns the error state of the last packet received (via [method get_packet] and [method get_var]). </description> </method> <method name="get_var"> diff --git a/doc/classes/PacketPeerUDP.xml b/doc/classes/PacketPeerUDP.xml index 5892eb17b7..9843c16108 100644 --- a/doc/classes/PacketPeerUDP.xml +++ b/doc/classes/PacketPeerUDP.xml @@ -20,21 +20,21 @@ <return type="String"> </return> <description> - Return the IP of the remote peer that sent the last packet(that was received with [method PacketPeer.get_packet] or [method PacketPeer.get_var]). + Returns the IP of the remote peer that sent the last packet(that was received with [method PacketPeer.get_packet] or [method PacketPeer.get_var]). </description> </method> <method name="get_packet_port" qualifiers="const"> <return type="int"> </return> <description> - Return the port of the remote peer that sent the last packet(that was received with [method PacketPeer.get_packet] or [method PacketPeer.get_var]). + Returns the port of the remote peer that sent the last packet(that was received with [method PacketPeer.get_packet] or [method PacketPeer.get_var]). </description> </method> <method name="is_listening" qualifiers="const"> <return type="bool"> </return> <description> - Return whether this [PacketPeerUDP] is listening. + Returns whether this [PacketPeerUDP] is listening. </description> </method> <method name="listen"> diff --git a/doc/classes/Panel.xml b/doc/classes/Panel.xml index 1cee2b5386..c9c3f80e7b 100644 --- a/doc/classes/Panel.xml +++ b/doc/classes/Panel.xml @@ -15,9 +15,5 @@ <theme_items> <theme_item name="panel" type="StyleBox"> </theme_item> - <theme_item name="panelf" type="StyleBox"> - </theme_item> - <theme_item name="panelnc" type="StyleBox"> - </theme_item> </theme_items> </class> diff --git a/doc/classes/Path2D.xml b/doc/classes/Path2D.xml index c77e00a28e..ce15b3eab2 100644 --- a/doc/classes/Path2D.xml +++ b/doc/classes/Path2D.xml @@ -5,6 +5,7 @@ </brief_description> <description> Can have [PathFollow2D] child-nodes moving along the [Curve2D]. See [PathFollow2D] for more information on this usage. + Note that the path is considered as relative to the moved nodes (children of [PathFollow2D]) - usually the curve should start with a zero vector (0, 0). </description> <tutorials> </tutorials> diff --git a/doc/classes/Physics2DServer.xml b/doc/classes/Physics2DServer.xml index 641e1898ff..172420e4ca 100644 --- a/doc/classes/Physics2DServer.xml +++ b/doc/classes/Physics2DServer.xml @@ -18,6 +18,8 @@ </argument> <argument index="2" name="transform" type="Transform2D" default="Transform2D( 1, 0, 0, 1, 0, 0 )"> </argument> + <argument index="3" name="disabled" type="bool" default="false"> + </argument> <description> Adds a shape to the area, along with a transform matrix. Shapes are usually referenced by their index, so you should track which shape has a given index. </description> @@ -251,7 +253,7 @@ </argument> <argument index="1" name="shape_idx" type="int"> </argument> - <argument index="2" name="disable" type="bool"> + <argument index="2" name="disabled" type="bool"> </argument> <description> Disables a given shape in an area. @@ -346,6 +348,8 @@ </argument> <argument index="2" name="transform" type="Transform2D" default="Transform2D( 1, 0, 0, 1, 0, 0 )"> </argument> + <argument index="3" name="disabled" type="bool" default="false"> + </argument> <description> Adds a shape to the body, along with a transform matrix. Shapes are usually referenced by their index, so you should track which shape has a given index. </description> @@ -746,7 +750,7 @@ </argument> <argument index="1" name="shape_idx" type="int"> </argument> - <argument index="2" name="disable" type="bool"> + <argument index="2" name="disabled" type="bool"> </argument> <description> Disables shape in body if [code]disable[/code] is [code]true[/code]. diff --git a/doc/classes/PhysicsBody.xml b/doc/classes/PhysicsBody.xml index 4d94c57ad1..fc4f2e18fd 100644 --- a/doc/classes/PhysicsBody.xml +++ b/doc/classes/PhysicsBody.xml @@ -32,7 +32,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Returns an individual bit on the collision mask. + Returns an individual bit on the [member collision_layer]. </description> </method> <method name="get_collision_mask_bit" qualifiers="const"> @@ -41,7 +41,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Returns an individual bit on the collision mask. + Returns an individual bit on the [member collision_mask]. </description> </method> <method name="remove_collision_exception_with"> @@ -61,7 +61,7 @@ <argument index="1" name="value" type="bool"> </argument> <description> - Sets individual bits on the layer mask. Use this if you only need to change one layer's value. + Sets individual bits on the [member collision_layer] bitmask. Use this if you only need to change one layer's value. </description> </method> <method name="set_collision_mask_bit"> @@ -72,18 +72,20 @@ <argument index="1" name="value" type="bool"> </argument> <description> - Sets individual bits on the collision mask. Use this if you only need to change one layer's value. + Sets individual bits on the [member collision_mask] bitmask. Use this if you only need to change one layer's value. </description> </method> </methods> <members> <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer"> The physics layers this area is in. - Collidable objects can exist in any of 32 different layers. These layers work like a tagging system, and are not visual. A collidable can use these layers to select with which objects it can collide, using the collision_mask property. + Collidable objects can exist in any of 32 different layers. These layers work like a tagging system, and are not visual. A collidable can use these layers to select with which objects it can collide, using the [member collision_mask] property. A contact is detected if object A is in any of the layers that object B scans, or object B is in any layer scanned by object A. + Default value: 1 (the first layer/bit is enabled). </member> <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask"> The physics layers this area scans for collisions. + Default value: 1 (the first layer/bit is enabled). </member> </members> <constants> diff --git a/doc/classes/PhysicsBody2D.xml b/doc/classes/PhysicsBody2D.xml index faa992ef7a..a5024c2432 100644 --- a/doc/classes/PhysicsBody2D.xml +++ b/doc/classes/PhysicsBody2D.xml @@ -32,7 +32,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Returns an individual bit on the collision mask. + Returns an individual bit on the [member collision_layer]. </description> </method> <method name="get_collision_mask_bit" qualifiers="const"> @@ -41,7 +41,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Returns an individual bit on the collision mask. + Returns an individual bit on the [member collision_mask]. </description> </method> <method name="remove_collision_exception_with"> @@ -61,7 +61,7 @@ <argument index="1" name="value" type="bool"> </argument> <description> - Sets individual bits on the layer mask. Use this if you only need to change one layer's value. + Sets individual bits on the [member collision_layer] bitmask. Use this if you only need to change one layer's value. </description> </method> <method name="set_collision_mask_bit"> @@ -72,18 +72,20 @@ <argument index="1" name="value" type="bool"> </argument> <description> - Sets individual bits on the collision mask. Use this if you only need to change one layer's value. + Sets individual bits on the [member collision_mask] bitmask. Use this if you only need to change one layer's value. </description> </method> </methods> <members> <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer"> The physics layers this area is in. - Collidable objects can exist in any of 32 different layers. These layers work like a tagging system, and are not visual. A collidable can use these layers to select with which objects it can collide, using the collision_mask property. + Collidable objects can exist in any of 32 different layers. These layers work like a tagging system, and are not visual. A collidable can use these layers to select with which objects it can collide, using the [member collision_mask] property. A contact is detected if object A is in any of the layers that object B scans, or object B is in any layer scanned by object A. + Default value: 1 (the first layer/bit is enabled). </member> <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask"> The physics layers this area scans for collisions. + Default value: 1 (the first layer/bit is enabled). </member> <member name="layers" type="int" setter="_set_layers" getter="_get_layers"> Both [member collision_layer] and [member collision_mask]. Returns [member collision_layer] when accessed. Updates [member collision_layer] and [member collision_mask] when modified. diff --git a/doc/classes/PhysicsServer.xml b/doc/classes/PhysicsServer.xml index 25869a853c..78a6ed8ac0 100644 --- a/doc/classes/PhysicsServer.xml +++ b/doc/classes/PhysicsServer.xml @@ -18,6 +18,8 @@ </argument> <argument index="2" name="transform" type="Transform" default="Transform( 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0 )"> </argument> + <argument index="3" name="disabled" type="bool" default="false"> + </argument> <description> Adds a shape to the area, along with a transform matrix. Shapes are usually referenced by their index, so you should track which shape has a given index. </description> @@ -246,6 +248,18 @@ Substitutes a given area shape by another. The old shape is selected by its index, the new one by its [RID]. </description> </method> + <method name="area_set_shape_disabled"> + <return type="void"> + </return> + <argument index="0" name="area" type="RID"> + </argument> + <argument index="1" name="shape_idx" type="int"> + </argument> + <argument index="2" name="disabled" type="bool"> + </argument> + <description> + </description> + </method> <method name="area_set_shape_transform"> <return type="void"> </return> @@ -334,6 +348,8 @@ </argument> <argument index="2" name="transform" type="Transform" default="Transform( 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0 )"> </argument> + <argument index="3" name="disabled" type="bool" default="false"> + </argument> <description> Adds a shape to the body, along with a transform matrix. Shapes are usually referenced by their index, so you should track which shape has a given index. </description> @@ -750,6 +766,18 @@ Substitutes a given body shape by another. The old shape is selected by its index, the new one by its [RID]. </description> </method> + <method name="body_set_shape_disabled"> + <return type="void"> + </return> + <argument index="0" name="body" type="RID"> + </argument> + <argument index="1" name="shape_idx" type="int"> + </argument> + <argument index="2" name="disabled" type="bool"> + </argument> + <description> + </description> + </method> <method name="body_set_shape_transform"> <return type="void"> </return> diff --git a/doc/classes/PlaneMesh.xml b/doc/classes/PlaneMesh.xml index a8927f8479..a507f9f145 100644 --- a/doc/classes/PlaneMesh.xml +++ b/doc/classes/PlaneMesh.xml @@ -4,7 +4,7 @@ Class representing a planar [PrimitiveMesh]. </brief_description> <description> - Class representing a planar [PrimitiveMesh]. This flat mesh does not have a thickness. + Class representing a planar [PrimitiveMesh]. This flat mesh does not have a thickness. By default, this mesh is aligned on the X and Z axes; this default rotation isn't suited for use with billboarded materials. For billboarded materials, use [QuadMesh] instead. </description> <tutorials> </tutorials> @@ -15,10 +15,10 @@ Size of the generated plane. Defaults to (2.0, 2.0). </member> <member name="subdivide_depth" type="int" setter="set_subdivide_depth" getter="get_subdivide_depth"> - Number of subdivision along the z-axis. Defaults to 0. + Number of subdivision along the Z axis. Defaults to 0. </member> <member name="subdivide_width" type="int" setter="set_subdivide_width" getter="get_subdivide_width"> - Number of subdivision along the x-axis. Defaults to 0. + Number of subdivision along the X axis. Defaults to 0. </member> </members> <constants> diff --git a/doc/classes/PoolByteArray.xml b/doc/classes/PoolByteArray.xml index f46cb243d7..cb99b660ae 100644 --- a/doc/classes/PoolByteArray.xml +++ b/doc/classes/PoolByteArray.xml @@ -116,14 +116,14 @@ <return type="String"> </return> <description> - Return SHA256 string of the PoolByteArray. + Returns SHA256 string of the PoolByteArray. </description> </method> <method name="size"> <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> <method name="subarray"> diff --git a/doc/classes/PoolColorArray.xml b/doc/classes/PoolColorArray.xml index d16029a8d7..efc3582ba4 100644 --- a/doc/classes/PoolColorArray.xml +++ b/doc/classes/PoolColorArray.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PoolIntArray.xml b/doc/classes/PoolIntArray.xml index 83d73c8a24..fca1083c25 100644 --- a/doc/classes/PoolIntArray.xml +++ b/doc/classes/PoolIntArray.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the array size. + Returns the array size. </description> </method> </methods> diff --git a/doc/classes/PoolRealArray.xml b/doc/classes/PoolRealArray.xml index e1da99519c..c5f6062175 100644 --- a/doc/classes/PoolRealArray.xml +++ b/doc/classes/PoolRealArray.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PoolStringArray.xml b/doc/classes/PoolStringArray.xml index 6ef4222996..01dca93be3 100644 --- a/doc/classes/PoolStringArray.xml +++ b/doc/classes/PoolStringArray.xml @@ -91,7 +91,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PoolVector2Array.xml b/doc/classes/PoolVector2Array.xml index 50ded06b90..45f619dc5d 100644 --- a/doc/classes/PoolVector2Array.xml +++ b/doc/classes/PoolVector2Array.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PoolVector3Array.xml b/doc/classes/PoolVector3Array.xml index 69b4e54692..0a682e2baf 100644 --- a/doc/classes/PoolVector3Array.xml +++ b/doc/classes/PoolVector3Array.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/Popup.xml b/doc/classes/Popup.xml index c3256f2f5b..e1b51463b2 100644 --- a/doc/classes/Popup.xml +++ b/doc/classes/Popup.xml @@ -27,6 +27,17 @@ Popup (show the control in modal form) in the center of the screen relative to its current canvas transform, at the current size, or at a size determined by "size". </description> </method> + <method name="popup_centered_clamped"> + <return type="void"> + </return> + <argument index="0" name="size" type="Vector2" default="Vector2( 0, 0 )"> + </argument> + <argument index="1" name="fallback_ratio" type="float" default="0.75"> + </argument> + <description> + Popup (show the control in modal form) in the center of the screen relative to the current canvas transform, clamping the size to [code]size[/code], then ensuring the popup is no larger than the viewport size multiplied by [code]fallback_ratio[/code]. + </description> + </method> <method name="popup_centered_minsize"> <return type="void"> </return> diff --git a/doc/classes/PopupMenu.xml b/doc/classes/PopupMenu.xml index 4924175b6e..d6249f73aa 100644 --- a/doc/classes/PopupMenu.xml +++ b/doc/classes/PopupMenu.xml @@ -178,14 +178,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the accelerator of the item at index "idx". Accelerators are special combinations of keys that activate the item, no matter which control is focused. + Returns the accelerator of the item at index "idx". Accelerators are special combinations of keys that activate the item, no matter which control is focused. </description> </method> <method name="get_item_count" qualifiers="const"> <return type="int"> </return> <description> - Return the amount of items. + Returns the amount of items. </description> </method> <method name="get_item_icon" qualifiers="const"> @@ -194,7 +194,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the icon of the item at index "idx". + Returns the icon of the item at index "idx". </description> </method> <method name="get_item_id" qualifiers="const"> @@ -203,7 +203,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the id of the item at index "idx". + Returns the id of the item at index "idx". </description> </method> <method name="get_item_index" qualifiers="const"> @@ -221,7 +221,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the metadata of an item, which might be of any type. You can set it with [method set_item_metadata], which provides a simple way of assigning context data to items. + Returns the metadata of an item, which might be of any type. You can set it with [method set_item_metadata], which provides a simple way of assigning context data to items. </description> </method> <method name="get_item_shortcut" qualifiers="const"> @@ -238,7 +238,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the submenu name of the item at index "idx". + Returns the submenu name of the item at index "idx". </description> </method> <method name="get_item_text" qualifiers="const"> @@ -247,7 +247,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the text of the item at index "idx". + Returns the text of the item at index "idx". </description> </method> <method name="get_item_tooltip" qualifiers="const"> @@ -270,7 +270,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item at index "idx" is checkable in some way, i.e., whether has a checkbox or radio button. Note that checkable items just display a checkmark or radio button, but don't have any built-in checking behavior and must be checked/unchecked manually. + Returns whether the item at index "idx" is checkable in some way, i.e., whether has a checkbox or radio button. Note that checkable items just display a checkmark or radio button, but don't have any built-in checking behavior and must be checked/unchecked manually. </description> </method> <method name="is_item_checked" qualifiers="const"> @@ -279,7 +279,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item at index "idx" is checked. + Returns whether the item at index "idx" is checked. </description> </method> <method name="is_item_disabled" qualifiers="const"> @@ -288,7 +288,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item at index "idx" is disabled. When it is disabled it can't be selected, or its action invoked. + Returns whether the item at index "idx" is disabled. When it is disabled it can't be selected, or its action invoked. </description> </method> <method name="is_item_radio_checkable" qualifiers="const"> @@ -297,7 +297,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item at index "idx" has radio-button-style checkability. Remember this is just cosmetic and you have to add the logic for checking/unchecking items in radio groups. + Returns whether the item at index "idx" has radio-button-style checkability. Remember this is just cosmetic and you have to add the logic for checking/unchecking items in radio groups. </description> </method> <method name="is_item_separator" qualifiers="const"> @@ -306,7 +306,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item is a separator. If it is, it would be displayed as a line. + Returns whether the item is a separator. If it is, it would be displayed as a line. </description> </method> <method name="is_item_shortcut_disabled" qualifiers="const"> @@ -515,6 +515,9 @@ </method> </methods> <members> + <member name="allow_search" type="bool" setter="set_allow_search" getter="get_allow_search"> + If [code]true[/code], allows to navigate [PopupMenu] with letter keys. Default value: [code]false[/code]. + </member> <member name="hide_on_checkable_item_selection" type="bool" setter="set_hide_on_checkable_item_selection" getter="is_hide_on_checkable_item_selection"> </member> <member name="hide_on_item_selection" type="bool" setter="set_hide_on_item_selection" getter="is_hide_on_item_selection"> @@ -527,14 +530,14 @@ </members> <signals> <signal name="id_focused"> - <argument index="0" name="ID" type="int"> + <argument index="0" name="id" type="int"> </argument> <description> This event is emitted when user navigated to an item of some id using [code]ui_up[/code] or [code]ui_down[/code] action. </description> </signal> <signal name="id_pressed"> - <argument index="0" name="ID" type="int"> + <argument index="0" name="id" type="int"> </argument> <description> This event is emitted when an item of some id is pressed or its accelerator is activated. diff --git a/doc/classes/PrismMesh.xml b/doc/classes/PrismMesh.xml index 0d0f330647..62f1278bba 100644 --- a/doc/classes/PrismMesh.xml +++ b/doc/classes/PrismMesh.xml @@ -12,19 +12,19 @@ </methods> <members> <member name="left_to_right" type="float" setter="set_left_to_right" getter="get_left_to_right"> - Displacement of the upper edge along the x-axis. 0.0 positions edge straight above the bottome left edge. Defaults to 0.5 (positioned on the midpoint). + Displacement of the upper edge along the X axis. 0.0 positions edge straight above the bottom-left edge. Defaults to 0.5 (positioned on the midpoint). </member> <member name="size" type="Vector3" setter="set_size" getter="get_size"> Size of the prism. Defaults to (2.0, 2.0, 2.0). </member> <member name="subdivide_depth" type="int" setter="set_subdivide_depth" getter="get_subdivide_depth"> - Number of added edge loops along the z-axis. Defaults to 0. + Number of added edge loops along the Z axis. Defaults to 0. </member> <member name="subdivide_height" type="int" setter="set_subdivide_height" getter="get_subdivide_height"> - Number of added edge loops along the y-axis. Defaults to 0. + Number of added edge loops along the Y axis. Defaults to 0. </member> <member name="subdivide_width" type="int" setter="set_subdivide_width" getter="get_subdivide_width"> - Number of added edge loops along the x-axis. Defaults to 0. + Number of added edge loops along the X axis. Defaults to 0. </member> </members> <constants> diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index 1da134d441..5bcd39a8d6 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -4,7 +4,7 @@ Contains global variables accessible from everywhere. </brief_description> <description> - Contains global variables accessible from everywhere. Use "ProjectSettings.get_setting(variable)", "ProjectSettings.set_setting(variable,value)" or "ProjectSettings.has_setting(variable)" to access them. Variables stored in project.godot are also loaded into ProjectSettings, making this object very useful for reading custom game configuration options. + Contains global variables accessible from everywhere. Use [method get_setting], [method set_setting] or [method has_setting] to access them. Variables stored in [code]project.godot[/code] are also loaded into ProjectSettings, making this object very useful for reading custom game configuration options. </description> <tutorials> </tutorials> @@ -15,7 +15,7 @@ <argument index="0" name="hint" type="Dictionary"> </argument> <description> - Add a custom property info to a property. The dictionary must contain: name:[String](the name of the property) and type:[int](see TYPE_* in [@GlobalScope]), and optionally hint:[int](see PROPERTY_HINT_* in [@GlobalScope]), hint_string:[String]. + Adds a custom property info to a property. The dictionary must contain: name:[String](the property's name) and type:[int](see TYPE_* in [@GlobalScope]), and optionally hint:[int](see PROPERTY_HINT_* in [@GlobalScope]), hint_string:[String]. Example: [codeblock] ProjectSettings.set("category/property_name", 0) @@ -37,7 +37,7 @@ <argument index="0" name="name" type="String"> </argument> <description> - Clear the whole configuration (not recommended, may break things). + Clears the whole configuration (not recommended, may break things). </description> </method> <method name="get_order" qualifiers="const"> @@ -46,7 +46,7 @@ <argument index="0" name="name" type="String"> </argument> <description> - Return the order of a configuration value (influences when saved to the config file). + Returns the order of a configuration value (influences when saved to the config file). </description> </method> <method name="get_setting" qualifiers="const"> @@ -63,7 +63,7 @@ <argument index="0" name="path" type="String"> </argument> <description> - Convert a localized path (res://) to a full native OS path. + Converts a localized path ([code]res://[/code]) to a full native OS path. </description> </method> <method name="has_setting" qualifiers="const"> @@ -72,7 +72,7 @@ <argument index="0" name="name" type="String"> </argument> <description> - Return [code]true[/code] if a configuration value is present. + Returns [code]true[/code] if a configuration value is present. </description> </method> <method name="load_resource_pack"> @@ -81,7 +81,7 @@ <argument index="0" name="pack" type="String"> </argument> <description> - Loads the contents of the .pck or .zip file specified by [code]pack[/code] into the resource filesystem (res://). Returns [code]true[/code] on success. + Loads the contents of the .pck or .zip file specified by [code]pack[/code] into the resource filesystem ([code]res://[/code]). Returns [code]true[/code] on success. Note: If a file from [code]pack[/code] shares the same path as a file already in the resource filesystem, any attempts to load that file will use the file from [code]pack[/code]. </description> </method> @@ -91,7 +91,7 @@ <argument index="0" name="path" type="String"> </argument> <description> - Convert a path to a localized path (res:// path). + Convert a path to a localized path ([code]res://[/code] path). </description> </method> <method name="property_can_revert"> @@ -109,14 +109,14 @@ <argument index="0" name="name" type="String"> </argument> <description> - Returns the initial value of the specified property. Returns null if the property does not exist. + Returns the specified property's initial value. Returns [code]null[/code] if the property does not exist. </description> </method> <method name="save"> <return type="int" enum="Error"> </return> <description> - Saves the configuration to the project.godot file. + Saves the configuration to the [code]project.godot[/code] file. </description> </method> <method name="save_custom"> @@ -146,7 +146,7 @@ <argument index="1" name="position" type="int"> </argument> <description> - Set the order of a configuration value (influences when saved to the config file). + Sets the order of a configuration value (influences when saved to the config file). </description> </method> <method name="set_setting"> @@ -168,62 +168,68 @@ Background color for the boot splash. </member> <member name="application/boot_splash/fullsize" type="bool" setter="" getter=""> - Scale the boot splash image to the full window length when engine starts (will leave it as default pixel size otherwise). + If [code]true[/code], scale the boot splash image to the full window length when engine starts. If [code]false[/code], the engine will leave it at the default pixel size. </member> <member name="application/boot_splash/image" type="String" setter="" getter=""> - Path to an image used for boot splash. + Path to an image used as the boot splash. </member> <member name="application/config/custom_user_dir_name" type="String" setter="" getter=""> - This user directory is used for storing persistent data ([code]user://[/code] filesystem). By default (no custom name defined), [code]user://[/code] resolves to a project-specific folder in Godot's own configuration folder (see [method OS.get_user_data_dir]). If a custom directory name is defined, this name will be used instead and appended to the system-specific user data directory (same parent folder as the Godot configuration folder documented in [method OS.get_user_data_dir]). + This user directory is used for storing persistent data ([code]user://[/code] filesystem). If left empty, [code]user://[/code] resolves to a project-specific folder in Godot's own configuration folder (see [method OS.get_user_data_dir]). If a custom directory name is defined, this name will be used instead and appended to the system-specific user data directory (same parent folder as the Godot configuration folder documented in [method OS.get_user_data_dir]). The [member application/config/use_custom_user_dir] setting must be enabled for this to take effect. </member> <member name="application/config/icon" type="String" setter="" getter=""> - Icon used for the project, set when project loads. Exporters will use this icon when possible to. + Icon used for the project, set when project loads. Exporters will also use this icon when possible. + </member> + <member name="application/config/macos_native_icon" type="String" setter="" getter=""> </member> <member name="application/config/name" type="String" setter="" getter=""> - Name of the project. It is used from both project manager and by the exporters. Overriding this as name.locale allows setting it in multiple languages. + The project's name. It is used both by the Project Manager and by exporters. The project name can be translated by translating its value in localization files. </member> <member name="application/config/project_settings_override" type="String" setter="" getter=""> Specifies a file to override project settings. For example: [code]user://custom_settings.cfg[/code]. </member> <member name="application/config/use_custom_user_dir" type="bool" setter="" getter=""> - Allow the project to save to its own custom user dir (see [member application/config/custom_user_dir_name]). This setting only works for desktop platforms. A name must be set in the [member application/config/custom_user_dir_name] setting for this to take effect. + If [code]true[/code], the project will save user data to its own user directory (see [member application/config/custom_user_dir_name]). This setting is only effective on desktop platforms. A name must be set in the [member application/config/custom_user_dir_name] setting for this to take effect. If [code]false[/code], the project will save user data to [code](OS user data directory)/Godot/app_userdata/(project name)[/code]. + </member> + <member name="application/config/windows_native_icon" type="String" setter="" getter=""> </member> <member name="application/run/disable_stderr" type="bool" setter="" getter=""> - Disable printing to stderr on exported build. + If [code]true[/code], disables printing to standard error in an exported build. </member> <member name="application/run/disable_stdout" type="bool" setter="" getter=""> - Disable printing to stdout on exported build. + If [code]true[/code], disables printing to standard output in an exported build. </member> <member name="application/run/frame_delay_msec" type="int" setter="" getter=""> - Force a delay between frames in the main loop. This may be useful if you plan to disable vsync. + Forces a delay between frames in the main loop (in milliseconds). This may be useful if you plan to disable vertical synchronization. </member> <member name="application/run/low_processor_mode" type="bool" setter="" getter=""> - Turn on low processor mode. This setting only works on desktops. The screen is not redrawn if nothing changes visually. This is meant for writing applications and editors, but is pretty useless (and can hurt performance) on games. + If [code]true[/code], enables low-processor usage mode. This setting only works on desktop platforms. The screen is not redrawn if nothing changes visually. This is meant for writing applications and editors, but is pretty useless (and can hurt performance) in most games. </member> <member name="application/run/low_processor_mode_sleep_usec" type="int" setter="" getter=""> - Amount of sleeping between frames when the low_processor_mode is enabled. This effectively reduces CPU usage when this mode is enabled. + Amount of sleeping between frames when the low-processor usage mode is enabled (in microseconds). Higher values will result in lower CPU usage. </member> <member name="application/run/main_scene" type="String" setter="" getter=""> Path to the main scene file that will be loaded when the project runs. </member> <member name="audio/channel_disable_threshold_db" type="float" setter="" getter=""> - Audio buses will disable automatically when sound goes below a given DB threshold for a given time. This saves CPU as effects assigned to that bus will no longer do any processing. + Audio buses will disable automatically when sound goes below a given dB threshold for a given time. This saves CPU as effects assigned to that bus will no longer do any processing. </member> <member name="audio/channel_disable_time" type="float" setter="" getter=""> - Audio buses will disable automatically when sound goes below a given DB threshold for a given time. This saves CPU as effects assigned to that bus will no longer do any processing. + Audio buses will disable automatically when sound goes below a given dB threshold for a given time. This saves CPU as effects assigned to that bus will no longer do any processing. </member> <member name="audio/default_bus_layout" type="String" setter="" getter=""> </member> <member name="audio/driver" type="String" setter="" getter=""> + Specifies the audio driver to use. This setting is platform-dependent as each platform supports different audio drivers. If left empty, the default audio driver will be used. </member> <member name="audio/enable_audio_input" type="bool" setter="" getter=""> - This option should be enabled if project works with microphone. + If [code]true[/code], microphone input will be allowed. This requires appropriate permissions to be set when exporting to Android or iOS. </member> <member name="audio/mix_rate" type="int" setter="" getter=""> - Mix rate used for audio. In general, it's better to not touch this and leave it to the host operating system. + Mixing rate used for audio. In general, it's better to not touch this and leave it to the host operating system. </member> <member name="audio/output_latency" type="int" setter="" getter=""> + Output latency in milliseconds for audio. Lower values will result in lower audio latency at the cost of increased CPU usage. Low values may result in audible cracking on slower hardware. </member> <member name="audio/video_delay_compensation_ms" type="int" setter="" getter=""> Setting to hardcode audio delay when playing video. Best to leave this untouched unless you know what you are doing. @@ -232,75 +238,105 @@ Default compression level for gzip. Affects compressed scenes and resources. </member> <member name="compression/formats/zlib/compression_level" type="int" setter="" getter=""> - Default compression level for zlib. Affects compressed scenes and resources. + Default compression level for Zlib. Affects compressed scenes and resources. </member> <member name="compression/formats/zstd/compression_level" type="int" setter="" getter=""> - Default compression level for zstd. Affects compressed scenes and resources. + Default compression level for Zstandard. Affects compressed scenes and resources. </member> <member name="compression/formats/zstd/long_distance_matching" type="bool" setter="" getter=""> - Enable long distance matching in zstd. + Enables long-distance matching in Zstandard. </member> <member name="compression/formats/zstd/window_log_size" type="int" setter="" getter=""> </member> <member name="debug/gdscript/completion/autocomplete_setters_and_getters" type="bool" setter="" getter=""> + If [code]true[/code], displays getters and setters in autocompletion results in the script editor. This setting is meant to be used when porting old projects (Godot 2), as using member variables is the preferred style from Godot 3 onwards. </member> <member name="debug/gdscript/warnings/constant_used_as_function" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a constant is used as a function. </member> <member name="debug/gdscript/warnings/deprecated_keyword" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when deprecated keywords such as [code]slave[/code] are used. </member> <member name="debug/gdscript/warnings/enable" type="bool" setter="" getter=""> + If [code]true[/code], enables specific GDScript warnings (see [code]debug/gdscript/warnings/*[/code] settings). If [code]false[/code], disables all GDScript warnings. </member> <member name="debug/gdscript/warnings/function_conflicts_constant" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a function is declared with the same name as a constant. </member> <member name="debug/gdscript/warnings/function_conflicts_variable" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a function is declared with the same name as a variable. This will turn into an error in a future version when first-class functions become supported in GDScript. </member> <member name="debug/gdscript/warnings/function_may_yield" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a function assigned to a variable may yield and return a function state instead of a value. </member> <member name="debug/gdscript/warnings/function_used_as_property" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when using a function as if it was a property. </member> <member name="debug/gdscript/warnings/incompatible_ternary" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a ternary operator may emit values with incompatible types. </member> <member name="debug/gdscript/warnings/integer_division" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when dividing an integer by another integer (the decimal part will be discarded). </member> <member name="debug/gdscript/warnings/narrowing_conversion" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when passing a floating-point value to a function that expects an integer (it will be converted and lose precision). </member> <member name="debug/gdscript/warnings/property_used_as_function" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when using a property as if it was a function. </member> <member name="debug/gdscript/warnings/return_value_discarded" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when calling a function without using its return value (by assigning it to a variable or using it as a function argument). Such return values are sometimes used to denote possible errors using the [enum Error] enum. </member> <member name="debug/gdscript/warnings/shadowed_variable" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when defining a local or subclass member variable that would shadow a variable at an upper level (such as a member variable). </member> <member name="debug/gdscript/warnings/standalone_expression" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when calling an expression that has no effect on the surrounding code, such as writing [code]2 + 2[/code] as a statement. </member> <member name="debug/gdscript/warnings/treat_warnings_as_errors" type="bool" setter="" getter=""> + If [code]true[/code], all warnings will be reported as if they were errors. </member> <member name="debug/gdscript/warnings/unassigned_variable" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when using a variable that wasn't previously assigned. </member> <member name="debug/gdscript/warnings/unassigned_variable_op_assign" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when assigning a variable using an assignment operator like [code]+=[/code] if the variable wasn't previously assigned. </member> <member name="debug/gdscript/warnings/unreachable_code" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when unreachable code is detected (such as after a [code]return[/code] statement that will always be executed). </member> <member name="debug/gdscript/warnings/unsafe_call_argument" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when using an expression whose type may not be compatible with the function parameter expected. </member> <member name="debug/gdscript/warnings/unsafe_cast" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when performing an unsafe cast. </member> <member name="debug/gdscript/warnings/unsafe_method_access" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when calling a method whose presence is not guaranteed at compile-time in the class. </member> <member name="debug/gdscript/warnings/unsafe_property_access" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when accessing a property whose presence is not guaranteed at compile-time in the class. </member> <member name="debug/gdscript/warnings/unused_argument" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a function parameter is unused. </member> <member name="debug/gdscript/warnings/unused_class_variable" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a member variable is unused. </member> <member name="debug/gdscript/warnings/unused_signal" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a signal is unused. </member> <member name="debug/gdscript/warnings/unused_variable" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a local variable is unused. </member> <member name="debug/gdscript/warnings/variable_conflicts_function" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when a variable is declared with the same name as a function. This will turn into an error in a future version when first-class functions become supported in GDScript. </member> <member name="debug/gdscript/warnings/void_assignment" type="bool" setter="" getter=""> + If [code]true[/code], enables warnings when assigning the result of a function that returns [code]void[/code] to a variable. </member> <member name="debug/settings/crash_handler/message" type="String" setter="" getter=""> + Message to be displayed before the backtrace when the engine crashes. </member> <member name="debug/settings/fps/force_fps" type="int" setter="" getter=""> </member> @@ -311,34 +347,34 @@ Maximum amount of functions per frame allowed when profiling. </member> <member name="debug/settings/stdout/print_fps" type="bool" setter="" getter=""> - Print frames per second to stdout. Not very useful in general. + Print frames per second to standard output every second. </member> <member name="debug/settings/stdout/verbose_stdout" type="bool" setter="" getter=""> - Print more information to stdout when running. It shows info such as memory leaks, which scenes and resources are being loaded, etc. + Print more information to standard output when running. It displays information such as memory leaks, which scenes and resources are being loaded, etc. </member> <member name="debug/settings/visual_script/max_call_stack" type="int" setter="" getter=""> Maximum call stack in visual scripting, to avoid infinite recursion. </member> <member name="display/mouse_cursor/custom_image" type="String" setter="" getter=""> - Custom image for the mouse cursor. + Custom image for the mouse cursor (limited to 256x256). </member> <member name="display/mouse_cursor/custom_image_hotspot" type="Vector2" setter="" getter=""> Hotspot for the custom mouse cursor image. </member> <member name="display/mouse_cursor/tooltip_position_offset" type="Vector2" setter="" getter=""> - Position offset for tooltips, relative to the hotspot of the mouse cursor. + Position offset for tooltips, relative to the mouse cursor's hotspot. </member> <member name="display/window/dpi/allow_hidpi" type="bool" setter="" getter=""> - Allow HiDPI display on Windows and OSX. On Desktop Linux, this can't be enabled or disabled. + If [code]true[/code], allows HiDPI display on Windows and macOS. This setting has no effect on desktop Linux, as DPI-awareness fallbacks are not supported there. </member> <member name="display/window/energy_saving/keep_screen_on" type="bool" setter="" getter=""> - Force keep the screen on, so the screensaver does not take over. Works on Desktop and Mobile. + If [code]true[/code], keeps the screen on (even in case of inactivity), so the screensaver does not take over. Works on desktop and mobile platforms. </member> <member name="display/window/handheld/orientation" type="String" setter="" getter=""> - Default orientation for cell phone or tablet. + Default orientation on mobile devices. </member> <member name="display/window/per_pixel_transparency/allowed" type="bool" setter="" getter=""> - Allow per pixel transparency in a Desktop window. This affects performance if not needed, so leave it off. + If [code]true[/code], allows per-pixel transparency in a desktop window. This affects performance if not needed, so leave it on [code]false[/code] unless you need it. </member> <member name="display/window/per_pixel_transparency/enabled" type="bool" setter="" getter=""> </member> @@ -357,42 +393,44 @@ Set the main window height. On desktop, this is the default window size. Stretch mode settings use this also as a reference when enabled. </member> <member name="display/window/size/resizable" type="bool" setter="" getter=""> - Allow the window to be resizable by default. + Allows the window to be resizable by default. </member> <member name="display/window/size/test_height" type="int" setter="" getter=""> - Test a different height for the window. The main use for this is to test with stretch modes. + If greater than zero, uses a different height for the window when running from the editor. The main use for this is to test with stretch modes. </member> <member name="display/window/size/test_width" type="int" setter="" getter=""> - Test a different width for the window. The main use for this is to test with stretch modes. + If greater than zero, uses a different width for the window when running from the editor. The main use for this is to test with stretch modes. </member> <member name="display/window/size/width" type="int" setter="" getter=""> - Set the main window width. On desktop, this is the default window size. Stretch mode settings use this also as a reference when enabled. + Sets the main window width. On desktop platforms, this is the default window size. Stretch mode settings use this also as a reference when enabled. </member> <member name="display/window/vsync/use_vsync" type="bool" setter="" getter=""> - Use VSync. Don't be stupid, don't turn this off. + If [code]true[/code], enables vertical synchronization. This eliminates tearing that may appear in moving scenes, at the cost of higher input latency and stuttering at lower framerates. If [code]false[/code], vertical synchronization will be disabled, however, many platforms will enforce it regardless (such as mobile platforms and HTML5). </member> <member name="editor/active" type="bool" setter="" getter=""> Internal editor setting, don't touch. </member> + <member name="editor/search_in_file_extensions" type="PoolStringArray" setter="" getter=""> + </member> <member name="gui/common/default_scroll_deadzone" type="int" setter="" getter=""> </member> <member name="gui/common/swap_ok_cancel" type="bool" setter="" getter=""> - Enable swap OK and Cancel buttons on dialogs. This is because Windows/MacOS/Desktop Linux may use them in different order, so the GUI swaps them depending on the host OS. Disable this behavior by turning this setting off. + If [code]true[/code], swaps OK and Cancel buttons in dialogs on Windows and UWP to follow interface conventions. </member> <member name="gui/theme/custom" type="String" setter="" getter=""> Use a custom theme resource, set a path to it here. </member> <member name="gui/theme/custom_font" type="String" setter="" getter=""> - USe a custom default font resource, set a path to it here. + Use a custom default font resource, set a path to it here. </member> <member name="gui/theme/use_hidpi" type="bool" setter="" getter=""> - Make sure the theme used works with hidpi. + If [code]true[/code], makes sure the theme used works with HiDPI. </member> <member name="gui/timers/incremental_search_max_interval_msec" type="int" setter="" getter=""> - Timer setting for incremental search in Tree, IntemList, etc. controls. + Timer setting for incremental search in Tree, IntemList, etc. controls (in milliseconds). </member> <member name="gui/timers/text_edit_idle_detect_sec" type="float" setter="" getter=""> - Timer for detecting idle in the editor. + Timer for detecting idle in the editor (in seconds). </member> <member name="input/ui_accept" type="Dictionary" setter="" getter=""> </member> @@ -421,8 +459,10 @@ <member name="input/ui_up" type="Dictionary" setter="" getter=""> </member> <member name="input_devices/pointing/emulate_mouse_from_touch" type="bool" setter="" getter=""> + If [code]true[/code], sends mouse input events when tapping or swiping on the touchscreen. </member> <member name="input_devices/pointing/emulate_touch_from_mouse" type="bool" setter="" getter=""> + If [code]true[/code], sends touch input events when clicking or dragging the mouse. </member> <member name="layer_names/2d_physics/layer_1" type="String" setter="" getter=""> </member> @@ -585,23 +625,25 @@ <member name="layer_names/3d_render/layer_9" type="String" setter="" getter=""> </member> <member name="locale/fallback" type="String" setter="" getter=""> + The locale to fall back to if a translation isn't available in a given language. If left empty, [code]en[/code] (English) will be used. </member> <member name="locale/test" type="String" setter="" getter=""> + If non-empty, this locale will be used when running the project from the editor. </member> <member name="logging/file_logging/enable_file_logging" type="bool" setter="" getter=""> - Log all output to a file. + If [code]true[/code], logs all output to files. </member> <member name="logging/file_logging/log_path" type="String" setter="" getter=""> - Path to logs withint he project. Using an [code]user://[/code] based path is recommended. + Path to logs within the project. Using an [code]user://[/code] path is recommended. </member> <member name="logging/file_logging/max_log_files" type="int" setter="" getter=""> - Amount of log files (used for rotation). + Specifies the maximum amount of log files allowed (used for rotation). </member> <member name="memory/limits/message_queue/max_size_kb" type="int" setter="" getter=""> Godot uses a message queue to defer some function calls. If you run out of space on it (you will see an error), you can increase the size here. </member> <member name="memory/limits/multithreaded_server/rid_pool_prealloc" type="int" setter="" getter=""> - This is used by servers when used in multi threading mode (servers and visual). RIDs are preallocated to avoid stalling the server requesting them on threads. If servers get stalled too often when loading resources in a thread, increase this number. + This is used by servers when used in multi-threading mode (servers and visual). RIDs are preallocated to avoid stalling the server requesting them on threads. If servers get stalled too often when loading resources in a thread, increase this number. </member> <member name="network/limits/debugger_stdout/max_chars_per_second" type="int" setter="" getter=""> Maximum amount of characters allowed to send as output from the debugger. Over this value, content is dropped. This helps not to stall the debugger connection. @@ -613,7 +655,7 @@ Maximum amount of messages allowed to send as output from the debugger. Over this value, content is dropped. This helps not to stall the debugger connection. </member> <member name="network/limits/packet_peer_stream/max_buffer_po2" type="int" setter="" getter=""> - Default size of packet peer stream for deserializing godot data. Over this size, data is dropped. + Default size of packet peer stream for deserializing Godot data. Over this size, data is dropped. </member> <member name="network/limits/websocket_client/max_in_buffer_kb" type="int" setter="" getter=""> </member> @@ -632,13 +674,13 @@ <member name="network/limits/websocket_server/max_out_packets" type="int" setter="" getter=""> </member> <member name="network/remote_fs/page_read_ahead" type="int" setter="" getter=""> - Amount of read ahead used by remote filesystem. Improves latency. + Amount of read ahead used by remote filesystem. Higher values decrease the effects of latency at the cost of higher bandwidth usage. </member> <member name="network/remote_fs/page_size" type="int" setter="" getter=""> - Page size used by remote filesystem. + Page size used by remote filesystem (in bytes). </member> <member name="node/name_casing" type="int" setter="" getter=""> - When creating nodes names automatically, set the type of casing in this project. This is mostly an editor setting. + When creating node names automatically, set the type of casing in this project. This is mostly an editor setting. </member> <member name="node/name_num_separator" type="int" setter="" getter=""> What to use to separate node name from number. This is mostly an editor setting. @@ -646,20 +688,21 @@ <member name="physics/2d/physics_engine" type="String" setter="" getter=""> </member> <member name="physics/2d/thread_model" type="int" setter="" getter=""> - Set whether physics is run on the main thread or a separate one. Running the server on a thread increases performance, but restricts API Access to only physics process. + Sets whether physics is run on the main thread or a separate one. Running the server on a thread increases performance, but restricts API access to only physics process. </member> <member name="physics/3d/active_soft_world" type="bool" setter="" getter=""> </member> <member name="physics/3d/physics_engine" type="String" setter="" getter=""> + Sets which physics engine to use. </member> <member name="physics/common/physics_fps" type="int" setter="" getter=""> Frames per second used in the physics. Physics always needs a fixed amount of frames per second. </member> <member name="physics/common/physics_jitter_fix" type="float" setter="" getter=""> - Fix to improve physics jitter, specially on monitors where refresh rate is different than physics FPS. + Fix to improve physics jitter, specially on monitors where refresh rate is different than the physics FPS. </member> <member name="rendering/environment/default_clear_color" type="Color" setter="" getter=""> - Default background clear color. Overridable per [Viewport] using its [Environment]. See [member Environment.background_mode] and [member Environment.background_color] in particular. To change this default color programmatically, use [method VisualServer.set_default_clear_color]. + Default background clear color. Overriddable per [Viewport] using its [Environment]. See [member Environment.background_mode] and [member Environment.background_color] in particular. To change this default color programmatically, use [method VisualServer.set_default_clear_color]. </member> <member name="rendering/limits/buffers/blend_shape_max_buffer_size_kb" type="int" setter="" getter=""> Max buffer size for blend shapes. Any blend shape bigger than this will not work. @@ -674,68 +717,70 @@ Max buffer size for drawing immediate objects (ImmediateGeometry nodes). Nodes using more than this size will not work. </member> <member name="rendering/limits/rendering/max_renderable_elements" type="int" setter="" getter=""> - Max amount of elements renderable in a frame. If more than this are visible per frame, they will be dropped. Keep in mind elements refer to mesh surfaces and not mesh themselves. + Max amount of elements renderable in a frame. If more than this are visible per frame, they will be dropped. Keep in mind elements refer to mesh surfaces and not meshes themselves. </member> <member name="rendering/limits/time/time_rollover_secs" type="float" setter="" getter=""> - Shaders have a time variable that constantly increases. At some point it needs to be rolled back to zero to avoid numerical errors on shader animations. This setting specifies when. + Shaders have a time variable that constantly increases. At some point, it needs to be rolled back to zero to avoid precision errors on shader animations. This setting specifies when (in seconds). </member> <member name="rendering/quality/2d/gles2_use_nvidia_rect_flicker_workaround" type="bool" setter="" getter=""> - Some Nvidia GPU drivers have a bug, which produces flickering issues for the [code]draw_rect[/code] method, especially as used in [TileMap]. Refer to https://github.com/godotengine/godot/issues/9913 for details. - If [code]true[/code], this option enables a "safe" code path for such Nvidia GPUs, at the cost of performance. This option only impacts the GLES2 rendering backend (so the bug stays if you use GLES3), and only desktop platforms. Default value: [code]false[/code]. + Some NVIDIA GPU drivers have a bug which produces flickering issues for the [code]draw_rect[/code] method, especially as used in [TileMap]. Refer to [url=https://github.com/godotengine/godot/issues/9913][/url] for details. + If [code]true[/code], this option enables a "safe" code path for such NVIDIA GPUs at the cost of performance. This option only impacts the GLES2 rendering backend (so the bug stays if you use GLES3), and only desktop platforms. </member> <member name="rendering/quality/2d/use_pixel_snap" type="bool" setter="" getter=""> - Force snapping of polygons to pixels in 2D rendering. May help in some pixel art styles. + If [code]true[/code], forces snapping of polygons to pixels in 2D rendering. May help in some pixel art styles. </member> <member name="rendering/quality/depth_prepass/disable_for_vendors" type="String" setter="" getter=""> Disable depth pre-pass for some GPU vendors (usually mobile), as their architecture already does this. </member> <member name="rendering/quality/depth_prepass/enable" type="bool" setter="" getter=""> - Do a previous depth pass before rendering materials. This increases performance in scenes with high overdraw, when complex materials and lighting are used. + If [code]true[/code], performs a previous depth pass before rendering materials. This increases performance in scenes with high overdraw, when complex materials and lighting are used. </member> <member name="rendering/quality/directional_shadow/size" type="int" setter="" getter=""> - Size in pixels of the directional shadow. + The directional shadow's size in pixels. Higher values will result in sharper shadows, at the cost of performance. </member> <member name="rendering/quality/directional_shadow/size.mobile" type="int" setter="" getter=""> </member> <member name="rendering/quality/driver/driver_name" type="String" setter="" getter=""> - Name of the configured video driver ("GLES2" or "GLES3"). - Note that the backend in use can be overridden at runtime via the [code]--video-driver[/code] command line argument, or by the [member rendering/quality/driver/fallback_to_gles2] option if the target system does not support GLES3 and falls back to GLES2. In such cases, this property is not updated, so use [method OS.get_current_video_driver] to query it at runtime. + The video driver to use ("GLES2" or "GLES3"). + Note that the backend in use can be overridden at runtime via the [code]--video-driver[/code] command line argument, or by the [member rendering/quality/driver/fallback_to_gles2] option if the target system does not support GLES3 and falls back to GLES2. In such cases, this property is not updated, so use [method OS.get_current_video_driver] to query it at run-time. </member> <member name="rendering/quality/driver/fallback_to_gles2" type="bool" setter="" getter=""> - Whether to allow falling back to the GLES2 driver if the GLES3 driver is not supported. Default value: [code]false[/code]. - Note that the two video drivers are not drop-in replacements for each other, so a game designed for GLES3 might not work properly when falling back to GLES2. In particular, some features of the GLES3 backend are not available in GLES2. Enabling this setting also means that both ETC and ETC2 VRAM-compressed textures will be exported on Android and iOS, increasing the size of the game data pack. + If [code]true[/code], allows falling back to the GLES2 driver if the GLES3 driver is not supported. + Note that the two video drivers are not drop-in replacements for each other, so a game designed for GLES3 might not work properly when falling back to GLES2. In particular, some features of the GLES3 backend are not available in GLES2. Enabling this setting also means that both ETC and ETC2 VRAM-compressed textures will be exported on Android and iOS, increasing the data pack's size. </member> <member name="rendering/quality/filters/anisotropic_filter_level" type="int" setter="" getter=""> - Maximum Anisotropic filter level used for textures when anisotropy enabled. + Maximum anisotropic filter level used for textures with anisotropy enabled. Higher values will result in sharper textures when viewed from oblique angles, at the cost of performance. Only power-of-two values are valid (2, 4, 8, 16). </member> <member name="rendering/quality/filters/use_nearest_mipmap_filter" type="bool" setter="" getter=""> - Force to use nearest mipmap filtering when using mipmaps. This may increase performance in mobile as less memory bandwidth is used. + If [code]true[/code], uses nearest-neighbor mipmap filtering when using mipmaps (also called "bilinear filtering"), which will result in visible seams appearing between mipmap stages. This may increase performance in mobile as less memory bandwidth is used. If [code]false[/code], linear mipmap filtering (also called "trilinear filtering") is used. </member> <member name="rendering/quality/intended_usage/framebuffer_allocation" type="int" setter="" getter=""> - Strategy used for framebuffer allocation. The simpler it is, the less memory it uses (but the least features it supports). + Strategy used for framebuffer allocation. The simpler it is, the less resources it uses (but the less features it supports). </member> <member name="rendering/quality/intended_usage/framebuffer_allocation.mobile" type="int" setter="" getter=""> </member> <member name="rendering/quality/reflections/high_quality_ggx" type="bool" setter="" getter=""> - For reflection probes and panorama backgrounds (sky), use a high amount of samples to create ggx blurred versions (used for roughness). + If [code]true[/code], uses a high amount of samples to create blurred variants of reflection probes and panorama backgrounds (sky). Those blurred variants are used by rough materials. </member> <member name="rendering/quality/reflections/high_quality_ggx.mobile" type="bool" setter="" getter=""> </member> <member name="rendering/quality/reflections/texture_array_reflections" type="bool" setter="" getter=""> - For reflection probes and panorama backgrounds (sky), use a texture array instead of mipmaps. This reduces jitter noise on reflections, but costs more performance and memory. + If [code]true[/code], uses texture arrays instead of mipmaps for reflection probes and panorama backgrounds (sky). This reduces jitter noise on reflections, but costs more performance and memory. </member> <member name="rendering/quality/reflections/texture_array_reflections.mobile" type="bool" setter="" getter=""> </member> <member name="rendering/quality/shading/force_blinn_over_ggx" type="bool" setter="" getter=""> + If [code]true[/code], uses faster but lower-quality Blinn model to generate blurred reflections instead of the GGX model. </member> <member name="rendering/quality/shading/force_blinn_over_ggx.mobile" type="bool" setter="" getter=""> </member> <member name="rendering/quality/shading/force_lambert_over_burley" type="bool" setter="" getter=""> + If [code]true[/code], uses faster but lower-quality Lambert material lighting model instead of Burley. </member> <member name="rendering/quality/shading/force_lambert_over_burley.mobile" type="bool" setter="" getter=""> </member> <member name="rendering/quality/shading/force_vertex_shading" type="bool" setter="" getter=""> - Force vertex shading for all rendering. This can increase performance a lot, but also reduces quality immensely. Can work to optimize on very low end mobile. + If [code]true[/code], forces vertex shading for all rendering. This can increase performance a lot, but also reduces quality immensely. Can be used to optimize performance on low-end mobile devices. </member> <member name="rendering/quality/shading/force_vertex_shading.mobile" type="bool" setter="" getter=""> </member> @@ -752,12 +797,12 @@ Subdivision quadrant size for shadow mapping. See shadow mapping documentation. </member> <member name="rendering/quality/shadow_atlas/size" type="int" setter="" getter=""> - Size for shadow atlas (used for point and omni lights). See documentation. + Size for shadow atlas (used for OmniLights and SpotLights). See documentation. </member> <member name="rendering/quality/shadow_atlas/size.mobile" type="int" setter="" getter=""> </member> <member name="rendering/quality/shadows/filter_mode" type="int" setter="" getter=""> - Shadow filter mode. The more complex the filter, the more memory bandwidth required. + Shadow filter mode. Higher-quality settings result in smoother shadows that flicker less when moving. "Disabled" is the fastest option, but also has the lowest quality. "PCF5" is smoother but is also slower. "PCF13" is the smoothest option, but is also the slowest. </member> <member name="rendering/quality/shadows/filter_mode.mobile" type="int" setter="" getter=""> </member> @@ -773,24 +818,25 @@ Weight subsurface scattering samples. Helps to avoid reading samples from unrelated parts of the screen. </member> <member name="rendering/quality/voxel_cone_tracing/high_quality" type="bool" setter="" getter=""> - Use high quality voxel cone tracing (looks better, but requires a higher end GPU). + Use high-quality voxel cone tracing. This results in better-looking reflections, but is much more expensive on the GPU. </member> <member name="rendering/threads/thread_model" type="int" setter="" getter=""> - Thread model for rendering. Rendering on a thread can vastly improve performance, but syncinc to the main thread can cause a bit more jitter. + Thread model for rendering. Rendering on a thread can vastly improve performance, but synchronizing to the main thread can cause a bit more jitter. </member> <member name="rendering/vram_compression/import_bptc" type="bool" setter="" getter=""> + If [code]true[/code], the texture importer will import VRAM-compressed textures using the BPTC algorithm. This texture compression algorithm is only supported on desktop platforms, and only when using the GLES3 renderer. </member> <member name="rendering/vram_compression/import_etc" type="bool" setter="" getter=""> - If the project uses this compression (usually low end mobile), texture importer will import these. + If [code]true[/code], the texture importer will import VRAM-compressed textures using the Ericsson Texture Compression algorithm. This algorithm doesn't support alpha channels in textures. </member> <member name="rendering/vram_compression/import_etc2" type="bool" setter="" getter=""> - If the project uses this compression (usually high end mobile), texture importer will import these. + If [code]true[/code], the texture importer will import VRAM-compressed textures using the Ericsson Texture Compression 2 algorithm. This texture compression algorithm is only supported when using the GLES3 renderer. </member> <member name="rendering/vram_compression/import_pvrtc" type="bool" setter="" getter=""> - If the project uses this compression (usually iOS), texture importer will import these. + If [code]true[/code], the texture importer will import VRAM-compressed textures using the PowerVR Texture Compression algorithm. This texture compression algorithm is only supported on iOS. </member> <member name="rendering/vram_compression/import_s3tc" type="bool" setter="" getter=""> - If the project uses this compression (usually Desktop and Consoles), texture importer will import these. + If [code]true[/code], the texture importer will import VRAM-compressed textures using the S3 Texture Compression algorithm. This algorithm is only supported on desktop platforms and consoles. </member> <member name="script" type="Script" setter="" getter=""> </member> diff --git a/doc/classes/QuadMesh.xml b/doc/classes/QuadMesh.xml index 1b33f62e0f..779ce11180 100644 --- a/doc/classes/QuadMesh.xml +++ b/doc/classes/QuadMesh.xml @@ -4,7 +4,7 @@ Class representing a square mesh. </brief_description> <description> - Class representing a square mesh with size (2,2,0). Consider using a [PlaneMesh] if you require a differently sized plane. + Class representing a square [PrimitiveMesh]. This flat mesh does not have a thickness. By default, this mesh is aligned on the X and Y axes; this default rotation is more suited for use with billboarded materials. Unlike [PlaneMesh], this mesh doesn't provide subdivision options. </description> <tutorials> </tutorials> diff --git a/doc/classes/Quat.xml b/doc/classes/Quat.xml index f7134e580d..3ef65e1edb 100644 --- a/doc/classes/Quat.xml +++ b/doc/classes/Quat.xml @@ -84,7 +84,7 @@ <return type="Vector3"> </return> <description> - Return Euler angles (in the YXZ convention: first Z, then X, and Y last) corresponding to the rotation represented by the unit quaternion. Returned vector contains the rotation angles in the format (X-angle, Y-angle, Z-angle). + Returns Euler angles (in the YXZ convention: first Z, then X, and Y last) corresponding to the rotation represented by the unit quaternion. Returned vector contains the rotation angles in the format (X-angle, Y-angle, Z-angle). </description> </method> <method name="inverse"> diff --git a/doc/classes/RayCast.xml b/doc/classes/RayCast.xml index 1d2999a1ed..1368143b67 100644 --- a/doc/classes/RayCast.xml +++ b/doc/classes/RayCast.xml @@ -50,7 +50,7 @@ <return type="Object"> </return> <description> - Return the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). + Returns the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> <method name="get_collider_shape" qualifiers="const"> @@ -87,7 +87,7 @@ <return type="bool"> </return> <description> - Return whether any object is intersecting with the ray's vector (considering the vector length). + Returns whether any object is intersecting with the ray's vector (considering the vector length). </description> </method> <method name="remove_exception"> diff --git a/doc/classes/RayCast2D.xml b/doc/classes/RayCast2D.xml index 7a16e9e5e0..90e0178ddb 100644 --- a/doc/classes/RayCast2D.xml +++ b/doc/classes/RayCast2D.xml @@ -49,7 +49,7 @@ <return type="Object"> </return> <description> - Return the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). + Returns the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> <method name="get_collider_shape" qualifiers="const"> @@ -65,7 +65,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Return an individual bit on the collision mask. + Returns an individual bit on the collision mask. </description> </method> <method name="get_collision_normal" qualifiers="const"> @@ -86,7 +86,7 @@ <return type="bool"> </return> <description> - Return whether any object is intersecting with the ray's vector (considering the vector length). + Returns whether any object is intersecting with the ray's vector (considering the vector length). </description> </method> <method name="remove_exception"> diff --git a/doc/classes/Resource.xml b/doc/classes/Resource.xml index 8b6fb549aa..211bda1a09 100644 --- a/doc/classes/Resource.xml +++ b/doc/classes/Resource.xml @@ -7,7 +7,7 @@ Resource is the base class for all resource types, serving primarily as data containers. They are reference counted and freed when no longer in use. They are also loaded only once from disk, and further attempts to load the resource will return the same reference (all this in contrast to a [Node], which is not reference counted and can be instanced from disk as many times as desired). Resources can be saved externally on disk or bundled into another object, such as a [Node] or another resource. </description> <tutorials> - <link>https://docs.godotengine.org/en/stable/getting_started/step_by_step/resources.html</link> + <link>https://docs.godotengine.org/en/latest/getting_started/step_by_step/resources.html</link> </tutorials> <methods> <method name="_setup_local_to_scene" qualifiers="virtual"> diff --git a/doc/classes/ResourceInteractiveLoader.xml b/doc/classes/ResourceInteractiveLoader.xml index 6b37cb25fb..bb9826999c 100644 --- a/doc/classes/ResourceInteractiveLoader.xml +++ b/doc/classes/ResourceInteractiveLoader.xml @@ -13,21 +13,21 @@ <return type="Resource"> </return> <description> - Return the loaded resource (only if loaded). Otherwise, returns null. + Returns the loaded resource (only if loaded). Otherwise, returns null. </description> </method> <method name="get_stage" qualifiers="const"> <return type="int"> </return> <description> - Return the load stage. The total amount of stages can be queried with [method get_stage_count] + Returns the load stage. The total amount of stages can be queried with [method get_stage_count] </description> </method> <method name="get_stage_count" qualifiers="const"> <return type="int"> </return> <description> - Return the total amount of stages (calls to [method poll]) needed to completely load this resource. + Returns the total amount of stages (calls to [method poll]) needed to completely load this resource. </description> </method> <method name="poll"> diff --git a/doc/classes/ResourceLoader.xml b/doc/classes/ResourceLoader.xml index 70deb4509f..76b7c39191 100644 --- a/doc/classes/ResourceLoader.xml +++ b/doc/classes/ResourceLoader.xml @@ -33,7 +33,7 @@ <argument index="0" name="type" type="String"> </argument> <description> - Return the list of recognized extensions for a resource type. + Returns the list of recognized extensions for a resource type. </description> </method> <method name="has"> diff --git a/doc/classes/RigidBody.xml b/doc/classes/RigidBody.xml index 25b896ec3a..8dadca49e1 100644 --- a/doc/classes/RigidBody.xml +++ b/doc/classes/RigidBody.xml @@ -86,7 +86,7 @@ <return type="Array"> </return> <description> - Return a list of the bodies colliding with this one. By default, number of max contacts reported is at 0, see the [member contacts_reported] property to increase it. Note that the result of this test is not immediate after moving objects. For performance, list of collisions is updated once per frame and before the physics step. Consider using signals instead. + Returns a list of the bodies colliding with this one. By default, number of max contacts reported is at 0, see the [member contacts_reported] property to increase it. Note that the result of this test is not immediate after moving objects. For performance, list of collisions is updated once per frame and before the physics step. Consider using signals instead. </description> </method> <method name="set_axis_velocity"> @@ -119,10 +119,10 @@ Lock the body's movement in the x-axis. </member> <member name="axis_lock_linear_y" type="bool" setter="set_axis_lock" getter="get_axis_lock"> - Lock the body's movement in the x-axis. + Lock the body's movement in the y-axis. </member> <member name="axis_lock_linear_z" type="bool" setter="set_axis_lock" getter="get_axis_lock"> - Lock the body's movement in the x-axis. + Lock the body's movement in the z-axis. </member> <member name="bounce" type="float" setter="set_bounce" getter="get_bounce"> RigidBody's bounciness. diff --git a/doc/classes/RigidBody2D.xml b/doc/classes/RigidBody2D.xml index 16ee1a444c..9a1802b515 100644 --- a/doc/classes/RigidBody2D.xml +++ b/doc/classes/RigidBody2D.xml @@ -7,7 +7,8 @@ This node implements simulated 2D physics. You do not control a RigidBody2D directly. Instead you apply forces to it (gravity, impulses, etc.) and the physics simulation calculates the resulting movement based on its mass, friction, and other physical properties. A RigidBody2D has 4 behavior [member mode]s: Rigid, Static, Character, and Kinematic. [b]Note:[/b] You should not change a RigidBody2D's [code]position[/code] or [code]linear_velocity[/code] every frame or even very often. If you need to directly affect the body's state, use [method _integrate_forces], which allows you to directly access the physics state. - If you need to override the default physics behavior, you can write a custom force integration. See [member custom_integrator]. + Please also keep in mind that physics bodies manage their own transform which overwrites the ones you set. So any direct or indirect transformation (including scaling of the node or its parent) will be visible in the editor only, and immediately reset at runtime. + If you need to override the default physics behavior or add a transformation at runtime, you can write a custom force integration. See [member custom_integrator]. </description> <tutorials> </tutorials> diff --git a/doc/classes/SceneTree.xml b/doc/classes/SceneTree.xml index 0b1f659da3..a236d776c7 100644 --- a/doc/classes/SceneTree.xml +++ b/doc/classes/SceneTree.xml @@ -359,6 +359,12 @@ Emitted whenever a node is removed from the SceneTree. </description> </signal> + <signal name="node_renamed"> + <argument index="0" name="node" type="Node"> + </argument> + <description> + </description> + </signal> <signal name="physics_frame"> <description> Emitted immediately before [method Node._physics_process] is called on every node in the SceneTree. diff --git a/doc/classes/ScriptEditor.xml b/doc/classes/ScriptEditor.xml index 666ab15802..28e1f75ac1 100644 --- a/doc/classes/ScriptEditor.xml +++ b/doc/classes/ScriptEditor.xml @@ -55,6 +55,15 @@ Returns an array with all [Script] objects which are currently open in editor. </description> </method> + <method name="goto_line"> + <return type="void"> + </return> + <argument index="0" name="line_number" type="int"> + </argument> + <description> + Goes to the specified line in the current script. + </description> + </method> <method name="open_script_create_dialog"> <return type="void"> </return> diff --git a/doc/classes/Shape2D.xml b/doc/classes/Shape2D.xml index dec3c2b43c..c887e23de0 100644 --- a/doc/classes/Shape2D.xml +++ b/doc/classes/Shape2D.xml @@ -52,7 +52,7 @@ <argument index="4" name="shape_motion" type="Vector2"> </argument> <description> - Return whether this shape would collide with another, if a given movement was applied. + Returns whether this shape would collide with another, if a given movement was applied. This method needs the transformation matrix for this shape ([code]local_xform[/code]), the movement to test on this shape ([code]local_motion[/code]), the shape to check collisions with ([code]with_shape[/code]), the transformation matrix of that shape ([code]shape_xform[/code]), and the movement to test onto the other object ([code]shape_motion[/code]). </description> </method> diff --git a/doc/classes/Skeleton.xml b/doc/classes/Skeleton.xml index 8fab778a48..b693ee0a5e 100644 --- a/doc/classes/Skeleton.xml +++ b/doc/classes/Skeleton.xml @@ -44,14 +44,14 @@ <argument index="0" name="name" type="String"> </argument> <description> - Return the bone index that matches "name" as its name. + Returns the bone index that matches "name" as its name. </description> </method> <method name="get_bone_count" qualifiers="const"> <return type="int"> </return> <description> - Return the amount of bones in the skeleton. + Returns the amount of bones in the skeleton. </description> </method> <method name="get_bone_custom_pose" qualifiers="const"> @@ -60,7 +60,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the custom pose of the specified bone. Custom pose is applied on top of the rest pose. + Returns the custom pose of the specified bone. Custom pose is applied on top of the rest pose. </description> </method> <method name="get_bone_global_pose" qualifiers="const"> @@ -69,7 +69,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the overall transform of the specified bone, with respect to the skeleton. Being relative to the skeleton frame, this is not the actual "global" transform of the bone. + Returns the overall transform of the specified bone, with respect to the skeleton. Being relative to the skeleton frame, this is not the actual "global" transform of the bone. </description> </method> <method name="get_bone_name" qualifiers="const"> @@ -78,7 +78,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the name of the bone at index "index". + Returns the name of the bone at index "index". </description> </method> <method name="get_bone_parent" qualifiers="const"> @@ -87,7 +87,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the bone index which is the parent of the bone at "bone_idx". If -1, then bone has no parent. Note that the parent bone returned will always be less than "bone_idx". + Returns the bone index which is the parent of the bone at "bone_idx". If -1, then bone has no parent. Note that the parent bone returned will always be less than "bone_idx". </description> </method> <method name="get_bone_pose" qualifiers="const"> @@ -96,7 +96,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the pose transform of the specified bone. Pose is applied on top of the custom pose, which is applied on top the rest pose. + Returns the pose transform of the specified bone. Pose is applied on top of the custom pose, which is applied on top the rest pose. </description> </method> <method name="get_bone_rest" qualifiers="const"> @@ -105,7 +105,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the rest transform for a bone "bone_idx". + Returns the rest transform for a bone "bone_idx". </description> </method> <method name="get_bone_transform" qualifiers="const"> @@ -114,7 +114,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the combination of custom pose and pose. The returned transform is in skeleton's reference frame. + Returns the combination of custom pose and pose. The returned transform is in skeleton's reference frame. </description> </method> <method name="get_bound_child_nodes_to_bone" qualifiers="const"> @@ -229,7 +229,7 @@ <argument index="1" name="pose" type="Transform"> </argument> <description> - Return the pose transform for bone "bone_idx". + Returns the pose transform for bone "bone_idx". </description> </method> <method name="set_bone_rest"> diff --git a/doc/classes/SpatialMaterial.xml b/doc/classes/SpatialMaterial.xml index 8e93160af9..f0df5fac4a 100644 --- a/doc/classes/SpatialMaterial.xml +++ b/doc/classes/SpatialMaterial.xml @@ -120,6 +120,8 @@ <member name="flags_use_point_size" type="bool" setter="set_flag" getter="get_flag"> If [code]true[/code], render point size can be changed. Note: this is only effective for objects whose geometry is point-based rather than triangle-based. See also [member params_point_size]. </member> + <member name="flags_use_shadow_to_opacity" type="bool" setter="set_flag" getter="get_flag"> + </member> <member name="flags_vertex_lighting" type="bool" setter="set_flag" getter="get_flag"> If [code]true[/code], lighting is calculated per vertex rather than per pixel. This may increase performance on low-end devices. Default value: [code]false[/code]. </member> @@ -390,7 +392,9 @@ </constant> <constant name="FLAG_ENSURE_CORRECT_NORMALS" value="16" enum="Flags"> </constant> - <constant name="FLAG_MAX" value="18" enum="Flags"> + <constant name="FLAG_USE_SHADOW_TO_OPACITY" value="18" enum="Flags"> + </constant> + <constant name="FLAG_MAX" value="19" enum="Flags"> </constant> <constant name="DIFFUSE_BURLEY" value="0" enum="DiffuseMode"> Default diffuse scattering algorithm. diff --git a/doc/classes/SphereMesh.xml b/doc/classes/SphereMesh.xml index 0124d8a4b0..4ebb2e919d 100644 --- a/doc/classes/SphereMesh.xml +++ b/doc/classes/SphereMesh.xml @@ -15,7 +15,7 @@ Full height of the sphere. Defaults to 2.0. </member> <member name="is_hemisphere" type="bool" setter="set_is_hemisphere" getter="get_is_hemisphere"> - Determines whether a full sphere or a hemisphere is created. Attention: To get a regular hemisphere the height and radius of the sphere have to equal. Defaults to [code]false[/code]. + Determines whether a full sphere or a hemisphere is created. Attention: To get a regular hemisphere, the height and radius of the sphere have to equal. Defaults to [code]false[/code]. </member> <member name="radial_segments" type="int" setter="set_radial_segments" getter="get_radial_segments"> Number of radial segments on the sphere. Defaults to 64. diff --git a/doc/classes/Sprite.xml b/doc/classes/Sprite.xml index cc5fe93567..26ff67cc74 100644 --- a/doc/classes/Sprite.xml +++ b/doc/classes/Sprite.xml @@ -13,7 +13,13 @@ <return type="Rect2"> </return> <description> - Returns a Rect2 representing the Sprite's boundary relative to its local coordinates. + Returns a [Rect2] representing the Sprite's boundary in local coordinates. Can be used to detect if the Sprite was clicked. Example: + [codeblock] + func _input(event): + if event is InputEventMouseButton and event.pressed and event.button_index == BUTTON_LEFT: + if get_rect().has_point(to_local(event.position)): + print("A click!") + [/codeblock] </description> </method> <method name="is_pixel_opaque" qualifiers="const"> @@ -48,7 +54,7 @@ The texture's drawing offset. </member> <member name="region_enabled" type="bool" setter="set_region" getter="is_region"> - If [code]true[/code], texture is cut from a larger atlas texture. See [code]region_rect[/code]. Default value: [code]false[/code]. + If [code]true[/code], texture is cut from a larger atlas texture. See [member region_rect]. Default value: [code]false[/code]. </member> <member name="region_filter_clip" type="bool" setter="set_region_filter_clip" getter="is_region_filter_clip_enabled"> If [code]true[/code], the outermost pixels get blurred out. diff --git a/doc/classes/StreamPeer.xml b/doc/classes/StreamPeer.xml index af8e43944c..d278312fc3 100644 --- a/doc/classes/StreamPeer.xml +++ b/doc/classes/StreamPeer.xml @@ -41,7 +41,7 @@ <return type="int"> </return> <description> - Return the amount of bytes this [StreamPeer] has available. + Returns the amount of bytes this [StreamPeer] has available. </description> </method> <method name="get_data"> @@ -50,7 +50,7 @@ <argument index="0" name="bytes" type="int"> </argument> <description> - Return a chunk data with the received bytes. The amount of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will block until the desired amount is received. This function returns two values, an Error code and a data array. + Returns a chunk data with the received bytes. The amount of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will block until the desired amount is received. This function returns two values, an Error code and a data array. </description> </method> <method name="get_double"> @@ -73,7 +73,7 @@ <argument index="0" name="bytes" type="int"> </argument> <description> - Return a chunk data with the received bytes. The amount of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will return how many were actually received. This function returns two values, an Error code, and a data array. + Returns a chunk data with the received bytes. The amount of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will return how many were actually received. This function returns two values, an Error code, and a data array. </description> </method> <method name="get_string"> diff --git a/doc/classes/StreamPeerSSL.xml b/doc/classes/StreamPeerSSL.xml index f7fd36ed58..f28e6e5544 100644 --- a/doc/classes/StreamPeerSSL.xml +++ b/doc/classes/StreamPeerSSL.xml @@ -42,7 +42,7 @@ <return type="int" enum="StreamPeerSSL.Status"> </return> <description> - Return the status of the connection, one of STATUS_* enum. + Returns the status of the connection, one of STATUS_* enum. </description> </method> <method name="poll"> diff --git a/doc/classes/StreamPeerTCP.xml b/doc/classes/StreamPeerTCP.xml index 16bf69110d..0edea42521 100644 --- a/doc/classes/StreamPeerTCP.xml +++ b/doc/classes/StreamPeerTCP.xml @@ -31,21 +31,21 @@ <return type="String"> </return> <description> - Return the IP of this peer. + Returns the IP of this peer. </description> </method> <method name="get_connected_port" qualifiers="const"> <return type="int"> </return> <description> - Return the port of this peer. + Returns the port of this peer. </description> </method> <method name="get_status"> <return type="int" enum="StreamPeerTCP.Status"> </return> <description> - Return the status of the connection, see [enum StreamPeerTCP.Status]. + Returns the status of the connection, see [enum StreamPeerTCP.Status]. </description> </method> <method name="is_connected_to_host" qualifiers="const"> diff --git a/doc/classes/String.xml b/doc/classes/String.xml index 526a9427dc..a5a8766ca0 100644 --- a/doc/classes/String.xml +++ b/doc/classes/String.xml @@ -7,6 +7,7 @@ This is the built-in string class (and the one used by GDScript). It supports Unicode and provides all necessary means for string handling. Strings are reference counted and use a copy-on-write approach, so passing them around is cheap in resources. </description> <tutorials> + <link>https://docs.godotengine.org/en/latest/getting_started/scripting/gdscript/gdscript_format_string.html</link> </tutorials> <methods> <method name="String"> @@ -740,7 +741,14 @@ <argument index="1" name="right" type="bool" default="True"> </argument> <description> - Returns a copy of the string stripped of any non-printable character at the beginning and the end. The optional arguments are used to toggle stripping on the left and right edges respectively. + Returns a copy of the string stripped of any non-printable character (including tabulations, spaces and line breaks) at the beginning and the end. The optional arguments are used to toggle stripping on the left and right edges respectively. + </description> + </method> + <method name="strip_escapes"> + <return type="String"> + </return> + <description> + Returns a copy of the string stripped of any escape character. These include all non-printable control characters of the first page of the ASCII table (< 32), such as tabulation ([code]\t[/code] in C) and newline ([code]\n[/code] and [code]\r[/code]) characters, but not spaces. </description> </method> <method name="substr"> diff --git a/doc/classes/StyleBox.xml b/doc/classes/StyleBox.xml index 40cb2632b6..a156f134e7 100644 --- a/doc/classes/StyleBox.xml +++ b/doc/classes/StyleBox.xml @@ -37,7 +37,7 @@ <argument index="0" name="margin" type="int" enum="Margin"> </argument> <description> - Return the content margin offset for the specified margin + Returns the content margin offset for the specified margin Positive values reduce size inwards, unlike [Control]'s margin values. </description> </method> @@ -45,14 +45,14 @@ <return type="Vector2"> </return> <description> - Return the minimum size that this stylebox can be shrunk to. + Returns the minimum size that this stylebox can be shrunk to. </description> </method> <method name="get_offset" qualifiers="const"> <return type="Vector2"> </return> <description> - Return the "offset" of a stylebox, this is a helper function, like writing [code]Vector2(style.get_margin(MARGIN_LEFT), style.get_margin(MARGIN_TOP))[/code]. + Returns the "offset" of a stylebox, this is a helper function, like writing [code]Vector2(style.get_margin(MARGIN_LEFT), style.get_margin(MARGIN_TOP))[/code]. </description> </method> <method name="test_mask" qualifiers="const"> diff --git a/doc/classes/SurfaceTool.xml b/doc/classes/SurfaceTool.xml index 25188a80db..e97f9995ee 100644 --- a/doc/classes/SurfaceTool.xml +++ b/doc/classes/SurfaceTool.xml @@ -169,6 +169,12 @@ Returns a constructed [ArrayMesh] from current information passed in. If an existing [ArrayMesh] is passed in as an argument, will add an extra surface to the existing [ArrayMesh]. </description> </method> + <method name="commit_to_arrays"> + <return type="Array"> + </return> + <description> + </description> + </method> <method name="create_from"> <return type="void"> </return> @@ -180,6 +186,18 @@ Creates a vertex array from an existing [Mesh]. </description> </method> + <method name="create_from_blend_shape"> + <return type="void"> + </return> + <argument index="0" name="existing" type="Mesh"> + </argument> + <argument index="1" name="surface" type="int"> + </argument> + <argument index="2" name="blend_shape" type="String"> + </argument> + <description> + </description> + </method> <method name="deindex"> <return type="void"> </return> diff --git a/doc/classes/TCP_Server.xml b/doc/classes/TCP_Server.xml index ac9b33bc34..663d3248e8 100644 --- a/doc/classes/TCP_Server.xml +++ b/doc/classes/TCP_Server.xml @@ -13,7 +13,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if a connection is available for taking. + Returns [code]true[/code] if a connection is available for taking. </description> </method> <method name="listen"> diff --git a/doc/classes/TextEdit.xml b/doc/classes/TextEdit.xml index 1817055bab..eb70d7a1c3 100644 --- a/doc/classes/TextEdit.xml +++ b/doc/classes/TextEdit.xml @@ -41,6 +41,7 @@ <argument index="0" name="line" type="int"> </argument> <description> + Returns if the given line is foldable, that is, it has indented lines right below it. </description> </method> <method name="clear_colors"> @@ -68,14 +69,14 @@ <return type="int"> </return> <description> - Return the column the editing cursor is at. + Returns the column the editing cursor is at. </description> </method> <method name="cursor_get_line" qualifiers="const"> <return type="int"> </return> <description> - Return the line the editing cursor is at. + Returns the line the editing cursor is at. </description> </method> <method name="cursor_set_column"> @@ -120,6 +121,7 @@ <return type="void"> </return> <description> + Folds all lines that are possible to be folded (see [method can_fold]). </description> </method> <method name="fold_line"> @@ -128,13 +130,14 @@ <argument index="0" name="line" type="int"> </argument> <description> + Folds the given line, if possible (see [method can_fold]). </description> </method> <method name="get_breakpoints" qualifiers="const"> <return type="Array"> </return> <description> - Return an array containing the line number of each breakpoint. + Returns an array containing the line number of each breakpoint. </description> </method> <method name="get_keyword_color" qualifiers="const"> @@ -151,55 +154,56 @@ <argument index="0" name="line" type="int"> </argument> <description> - Return the text of a specific line. + Returns the text of a specific line. </description> </method> <method name="get_line_count" qualifiers="const"> <return type="int"> </return> <description> - Return the amount of total lines in the text. + Returns the amount of total lines in the text. </description> </method> <method name="get_menu" qualifiers="const"> <return type="PopupMenu"> </return> <description> + Returns the [PopupMenu] of this [TextEdit]. By default, this menu is displayed when right-clicking on the [TextEdit]. </description> </method> <method name="get_selection_from_column" qualifiers="const"> <return type="int"> </return> <description> - Return the selection begin column. + Returns the selection begin column. </description> </method> <method name="get_selection_from_line" qualifiers="const"> <return type="int"> </return> <description> - Return the selection begin line. + Returns the selection begin line. </description> </method> <method name="get_selection_text" qualifiers="const"> <return type="String"> </return> <description> - Return the text inside the selection. + Returns the text inside the selection. </description> </method> <method name="get_selection_to_column" qualifiers="const"> <return type="int"> </return> <description> - Return the selection end column. + Returns the selection end column. </description> </method> <method name="get_selection_to_line" qualifiers="const"> <return type="int"> </return> <description> - Return the selection end line. + Returns the selection end line. </description> </method> <method name="get_word_under_cursor" qualifiers="const"> @@ -231,6 +235,7 @@ <argument index="0" name="line" type="int"> </argument> <description> + Returns if the given line is folded. </description> </method> <method name="is_line_hidden" qualifiers="const"> @@ -245,7 +250,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if the selection is active. + Returns [code]true[/code] if the selection is active. </description> </method> <method name="menu_option"> @@ -346,6 +351,7 @@ <argument index="0" name="line" type="int"> </argument> <description> + Unfolds the given line, if folded. </description> </method> <method name="unhide_all_lines"> @@ -376,6 +382,15 @@ <member name="context_menu_enabled" type="bool" setter="set_context_menu_enabled" getter="is_context_menu_enabled"> If [code]true[/code], a right click displays the context menu. </member> + <member name="draw_spaces" type="bool" setter="set_draw_spaces" getter="is_drawing_spaces"> + If [code]true[/code], the "space" character will have a visible representation. + </member> + <member name="draw_tabs" type="bool" setter="set_draw_tabs" getter="is_drawing_tabs"> + If [code]true[/code], the "tab" character will have a visible representation. + </member> + <member name="fold_gutter" type="bool" setter="set_fold_gutter_enabled" getter="is_fold_gutter_enabled"> + If [code]true[/code], the fold gutter is visible. This enables folding groups of indented lines. + </member> <member name="hiding_enabled" type="int" setter="set_hiding_enabled" getter="is_hiding_enabled"> </member> <member name="highlight_all_occurrences" type="bool" setter="set_highlight_all_occurrences" getter="is_highlight_all_occurrences_enabled"> @@ -482,6 +497,8 @@ <theme_items> <theme_item name="background_color" type="Color"> </theme_item> + <theme_item name="bookmark_color" type="Color"> + </theme_item> <theme_item name="brace_mismatch_color" type="Color"> </theme_item> <theme_item name="breakpoint_color" type="Color"> @@ -512,8 +529,14 @@ </theme_item> <theme_item name="current_line_color" type="Color"> </theme_item> + <theme_item name="executing_line_color" type="Color"> + </theme_item> <theme_item name="focus" type="StyleBox"> </theme_item> + <theme_item name="fold" type="Texture"> + </theme_item> + <theme_item name="folded" type="Texture"> + </theme_item> <theme_item name="font" type="Font"> </theme_item> <theme_item name="font_color" type="Color"> @@ -540,6 +563,8 @@ </theme_item> <theme_item name="selection_color" type="Color"> </theme_item> + <theme_item name="space" type="Texture"> + </theme_item> <theme_item name="symbol_color" type="Color"> </theme_item> <theme_item name="tab" type="Texture"> diff --git a/doc/classes/Texture.xml b/doc/classes/Texture.xml index 39f3ee447c..4418a6ce8f 100644 --- a/doc/classes/Texture.xml +++ b/doc/classes/Texture.xml @@ -74,21 +74,21 @@ <return type="int"> </return> <description> - Return the texture height. + Returns the texture height. </description> </method> <method name="get_size" qualifiers="const"> <return type="Vector2"> </return> <description> - Return the texture size. + Returns the texture size. </description> </method> <method name="get_width" qualifiers="const"> <return type="int"> </return> <description> - Return the texture width. + Returns the texture width. </description> </method> <method name="has_alpha" qualifiers="const"> diff --git a/doc/classes/Theme.xml b/doc/classes/Theme.xml index bc44ec161a..8fdef5540b 100644 --- a/doc/classes/Theme.xml +++ b/doc/classes/Theme.xml @@ -8,6 +8,7 @@ Theme resources can be alternatively loaded by writing them in a .theme file, see docs for more info. </description> <tutorials> + <link>https://docs.godotengine.org/en/latest/tutorials/gui/gui_skinning.html</link> </tutorials> <methods> <method name="clear"> diff --git a/doc/classes/TileSet.xml b/doc/classes/TileSet.xml index 0bf602dcf7..f29a7990ed 100644 --- a/doc/classes/TileSet.xml +++ b/doc/classes/TileSet.xml @@ -10,6 +10,18 @@ <tutorials> </tutorials> <methods> + <method name="_forward_atlas_subtile_selection" qualifiers="virtual"> + <return type="Vector2"> + </return> + <argument index="0" name="atlastile_id" type="int"> + </argument> + <argument index="1" name="tilemap" type="Object"> + </argument> + <argument index="2" name="tile_location" type="Vector2"> + </argument> + <description> + </description> + </method> <method name="_forward_subtile_selection" qualifiers="virtual"> <return type="Vector2"> </return> diff --git a/doc/classes/Translation.xml b/doc/classes/Translation.xml index 5d51f7ee09..eea4f8ed03 100644 --- a/doc/classes/Translation.xml +++ b/doc/classes/Translation.xml @@ -7,8 +7,8 @@ Translations are resources that can be loaded/unloaded on demand. They map a string to another string. </description> <tutorials> - <link>https://docs.godotengine.org/en/stable/tutorials/i18n/internationalizing_games.html</link> - <link>https://docs.godotengine.org/en/stable/tutorials/i18n/locales.html</link> + <link>https://docs.godotengine.org/en/latest/tutorials/i18n/internationalizing_games.html</link> + <link>https://docs.godotengine.org/en/latest/tutorials/i18n/locales.html</link> </tutorials> <methods> <method name="add_message"> diff --git a/doc/classes/TranslationServer.xml b/doc/classes/TranslationServer.xml index a3acc2c659..400a6e31d5 100644 --- a/doc/classes/TranslationServer.xml +++ b/doc/classes/TranslationServer.xml @@ -7,8 +7,8 @@ Server that manages all translations. Translations can be set to it and removed from it. </description> <tutorials> - <link>https://docs.godotengine.org/en/stable/tutorials/i18n/internationalizing_games.html</link> - <link>https://docs.godotengine.org/en/stable/tutorials/i18n/locales.html</link> + <link>https://docs.godotengine.org/en/latest/tutorials/i18n/internationalizing_games.html</link> + <link>https://docs.godotengine.org/en/latest/tutorials/i18n/locales.html</link> </tutorials> <methods> <method name="add_translation"> @@ -27,6 +27,12 @@ Clears the server from all translations. </description> </method> + <method name="get_loaded_locales" qualifiers="const"> + <return type="Array"> + </return> + <description> + </description> + </method> <method name="get_locale" qualifiers="const"> <return type="String"> </return> diff --git a/doc/classes/Tree.xml b/doc/classes/Tree.xml index b60673bb5b..0272efeecb 100644 --- a/doc/classes/Tree.xml +++ b/doc/classes/Tree.xml @@ -271,6 +271,12 @@ Emitted when a cell with the [code]CELL_MODE_CUSTOM[/code] is clicked to be edited. </description> </signal> + <signal name="empty_rmb"> + <argument index="0" name="position" type="Vector2"> + </argument> + <description> + </description> + </signal> <signal name="empty_tree_rmb_selected"> <argument index="0" name="position" type="Vector2"> </argument> diff --git a/doc/classes/TreeItem.xml b/doc/classes/TreeItem.xml index 9524e048bb..f7887a87c8 100644 --- a/doc/classes/TreeItem.xml +++ b/doc/classes/TreeItem.xml @@ -163,8 +163,11 @@ <method name="get_next_visible"> <return type="TreeItem"> </return> + <argument index="0" name="wrap" type="bool" default="false"> + </argument> <description> Returns the next visible TreeItem in the tree. + If [code]wrap[/code] is enabled, the method will wrap around to the first visible element in the tree when called on the last visible element, otherwise it returns [code]null[/code]. </description> </method> <method name="get_parent"> @@ -184,8 +187,11 @@ <method name="get_prev_visible"> <return type="TreeItem"> </return> + <argument index="0" name="wrap" type="bool" default="false"> + </argument> <description> Returns the previous visible TreeItem in the tree. + If [code]wrap[/code] is enabled, the method will wrap around to the last visible element in the tree when called on the first visible element, otherwise it returns [code]null[/code]. </description> </method> <method name="get_range" qualifiers="const"> diff --git a/doc/classes/Vector2.xml b/doc/classes/Vector2.xml index e6fb32a032..243dbceced 100644 --- a/doc/classes/Vector2.xml +++ b/doc/classes/Vector2.xml @@ -185,6 +185,17 @@ Returns the result of the linear interpolation between this vector and [code]b[/code] by amount [code]t[/code]. [code]t[/code] is in the range of [code]0.0 - 1.0[/code], representing the amount of interpolation. </description> </method> + <method name="move_toward"> + <return type="Vector2"> + </return> + <argument index="0" name="to" type="Vector2"> + </argument> + <argument index="1" name="delta" type="float"> + </argument> + <description> + Moves the vector toward [code]to[/code] by the fixed [code]delta[/code] amount. + </description> + </method> <method name="normalized"> <return type="Vector2"> </return> @@ -216,7 +227,7 @@ <argument index="0" name="phi" type="float"> </argument> <description> - Returns the vector rotated by [code]phi[/code] radians. + Returns the vector rotated by [code]phi[/code] radians. See also [method @GDScript.deg2rad]. </description> </method> <method name="round"> diff --git a/doc/classes/Vector3.xml b/doc/classes/Vector3.xml index bcd745945e..99bf3d2610 100644 --- a/doc/classes/Vector3.xml +++ b/doc/classes/Vector3.xml @@ -175,6 +175,17 @@ Returns the axis of the vector's smallest value. See [code]AXIS_*[/code] constants. </description> </method> + <method name="move_toward"> + <return type="Vector3"> + </return> + <argument index="0" name="to" type="Vector3"> + </argument> + <argument index="1" name="delta" type="float"> + </argument> + <description> + Moves the vector toward [code]to[/code] by the fixed [code]delta[/code] amount. + </description> + </method> <method name="normalized"> <return type="Vector3"> </return> diff --git a/doc/classes/VehicleWheel.xml b/doc/classes/VehicleWheel.xml index f8dac82cb5..c3b668c170 100644 --- a/doc/classes/VehicleWheel.xml +++ b/doc/classes/VehicleWheel.xml @@ -9,6 +9,12 @@ <tutorials> </tutorials> <methods> + <method name="get_rpm" qualifiers="const"> + <return type="float"> + </return> + <description> + </description> + </method> <method name="get_skidinfo" qualifiers="const"> <return type="float"> </return> diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index b48dc9de35..53e66cee74 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -253,6 +253,9 @@ <member name="physics_object_picking" type="bool" setter="set_physics_object_picking" getter="get_physics_object_picking"> If [code]true[/code], the objects rendered by viewport become subjects of mouse picking process. Default value: [code]false[/code]. </member> + <member name="render_direct_to_screen" type="bool" setter="set_use_render_direct_to_screen" getter="is_using_render_direct_to_screen"> + If [code]true[/code], renders the Viewport directly to the screen instead of to the root viewport. Only available in GLES2. This is a low-level optimization and should not be used in most cases. If used, reading from the Viewport or from [code]SCREEN_TEXTURE[/code] becomes unavailable. For more information see [method VisualServer.viewport_set_render_direct_to_screen]. Default value: [code]false[/code]. + </member> <member name="render_target_clear_mode" type="int" setter="set_clear_mode" getter="get_clear_mode" enum="Viewport.ClearMode"> The clear mode when viewport used as a render target. Default value: [code]CLEAR_MODE_ALWAYS[/code]. </member> diff --git a/doc/classes/VisualServer.xml b/doc/classes/VisualServer.xml index 87bf0b79b6..3997798cca 100644 --- a/doc/classes/VisualServer.xml +++ b/doc/classes/VisualServer.xml @@ -2085,6 +2085,17 @@ <description> </description> </method> + <method name="light_set_use_gi"> + <return type="void"> + </return> + <argument index="0" name="light" type="RID"> + </argument> + <argument index="1" name="enabled" type="bool"> + </argument> + <description> + Sets whether GI probes capture light information from this light. + </description> + </method> <method name="lightmap_capture_create"> <return type="RID"> </return> @@ -3579,7 +3590,14 @@ <argument index="2" name="screen" type="int" default="0"> </argument> <description> - Attaches a viewport to a screen. + Copies viewport to a region of the screen specified by [code]rect[/code]. If Viewport.[member Viewport.render_direct_to_screen] is [code]true[/code], then viewport does not use a framebuffer and the contents of the viewport are rendered directly to screen. However, note that the root viewport is drawn last, therefore it will draw over the screen. Accordingly, you must set the root viewport to an area that does not cover the area that you have attached this viewport to. + For example, you can set the root viewport to not render at all with the following code: + [codeblock] + func _ready(): + get_viewport().set_attach_to_screen_rect(Rect2()) + $Viewport.set_attach_to_screen_rect(Rect2(0, 0, 600, 600)) + [/codeblock] + Using this can result in significant optimization, especially on lower-end devices. However, it comes at the cost of having to manage your viewports manually. For a further optimization see, [method viewport_set_render_direct_to_screen]. </description> </method> <method name="viewport_create"> @@ -3778,6 +3796,17 @@ Sets the viewport's parent to another viewport. </description> </method> + <method name="viewport_set_render_direct_to_screen"> + <return type="void"> + </return> + <argument index="0" name="viewport" type="RID"> + </argument> + <argument index="1" name="enabled" type="bool"> + </argument> + <description> + If [code]true[/code], render the contents of the viewport directly to screen. This allows a low-level optimization where you can skip drawing a viewport to the root viewport. While this optimization can result in a significant increase in speed (especially on older devices), it comes at a cost of usability. When this is enabled, you cannot read from the viewport or from the [code]SCREEN_TEXTURE[/code]. You also lose the benefit of certain window settings, such as the various stretch modes. Another consequence to be aware of is that in 2D the rendering happens in window coordinates, so if you have a viewport that is double the size of the window, and you set this, then only the portion that fits within the window will be drawn, no automatic scaling is possible, even if your game scene is significantly larger than the window size. + </description> + </method> <method name="viewport_set_scenario"> <return type="void"> </return> diff --git a/doc/classes/VisualShader.xml b/doc/classes/VisualShader.xml index d399f69c96..6d5f53d992 100644 --- a/doc/classes/VisualShader.xml +++ b/doc/classes/VisualShader.xml @@ -53,6 +53,22 @@ <description> </description> </method> + <method name="connect_nodes_forced"> + <return type="void"> + </return> + <argument index="0" name="type" type="int" enum="VisualShader.Type"> + </argument> + <argument index="1" name="from_node" type="int"> + </argument> + <argument index="2" name="from_port" type="int"> + </argument> + <argument index="3" name="to_node" type="int"> + </argument> + <argument index="4" name="to_port" type="int"> + </argument> + <description> + </description> + </method> <method name="disconnect_nodes"> <return type="void"> </return> @@ -129,6 +145,12 @@ <description> </description> </method> + <method name="rebuild"> + <return type="void"> + </return> + <description> + </description> + </method> <method name="remove_node"> <return type="void"> </return> diff --git a/doc/classes/VisualShaderNodeExpression.xml b/doc/classes/VisualShaderNodeExpression.xml new file mode 100644 index 0000000000..8a5477280f --- /dev/null +++ b/doc/classes/VisualShaderNodeExpression.xml @@ -0,0 +1,23 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeExpression" inherits="VisualShaderNodeGroupBase" category="Core" version="3.2"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + <method name="build"> + <return type="void"> + </return> + <description> + </description> + </method> + </methods> + <members> + <member name="expression" type="String" setter="set_expression" getter="get_expression"> + </member> + </members> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeFresnel.xml b/doc/classes/VisualShaderNodeFresnel.xml new file mode 100644 index 0000000000..2484a44fcd --- /dev/null +++ b/doc/classes/VisualShaderNodeFresnel.xml @@ -0,0 +1,13 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeFresnel" inherits="VisualShaderNode" category="Core" version="3.2"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeGroupBase.xml b/doc/classes/VisualShaderNodeGroupBase.xml new file mode 100644 index 0000000000..37d48956f6 --- /dev/null +++ b/doc/classes/VisualShaderNodeGroupBase.xml @@ -0,0 +1,205 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeGroupBase" inherits="VisualShaderNode" category="Core" version="3.2"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> + <methods> + <method name="add_input_port"> + <return type="void"> + </return> + <argument index="0" name="id" type="int"> + </argument> + <argument index="1" name="type" type="int"> + </argument> + <argument index="2" name="name" type="String"> + </argument> + <description> + </description> + </method> + <method name="add_output_port"> + <return type="void"> + </return> + <argument index="0" name="id" type="int"> + </argument> + <argument index="1" name="type" type="int"> + </argument> + <argument index="2" name="name" type="String"> + </argument> + <description> + </description> + </method> + <method name="clear_input_ports"> + <return type="void"> + </return> + <description> + </description> + </method> + <method name="clear_output_ports"> + <return type="void"> + </return> + <description> + </description> + </method> + <method name="get_control"> + <return type="Control"> + </return> + <argument index="0" name="index" type="int"> + </argument> + <description> + </description> + </method> + <method name="get_free_input_port_id" qualifiers="const"> + <return type="int"> + </return> + <description> + </description> + </method> + <method name="get_free_output_port_id" qualifiers="const"> + <return type="int"> + </return> + <description> + </description> + </method> + <method name="get_input_port_count" qualifiers="const"> + <return type="int"> + </return> + <description> + </description> + </method> + <method name="get_inputs" qualifiers="const"> + <return type="String"> + </return> + <description> + </description> + </method> + <method name="get_output_port_count" qualifiers="const"> + <return type="int"> + </return> + <description> + </description> + </method> + <method name="get_outputs" qualifiers="const"> + <return type="String"> + </return> + <description> + </description> + </method> + <method name="get_size" qualifiers="const"> + <return type="Vector2"> + </return> + <description> + </description> + </method> + <method name="has_input_port" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="id" type="int"> + </argument> + <description> + </description> + </method> + <method name="has_output_port" qualifiers="const"> + <return type="bool"> + </return> + <argument index="0" name="id" type="int"> + </argument> + <description> + </description> + </method> + <method name="remove_input_port"> + <return type="void"> + </return> + <argument index="0" name="id" type="int"> + </argument> + <description> + </description> + </method> + <method name="remove_output_port"> + <return type="void"> + </return> + <argument index="0" name="id" type="int"> + </argument> + <description> + </description> + </method> + <method name="set_control"> + <return type="void"> + </return> + <argument index="0" name="control" type="Control"> + </argument> + <argument index="1" name="index" type="int"> + </argument> + <description> + </description> + </method> + <method name="set_input_port_name"> + <return type="void"> + </return> + <argument index="0" name="arg0" type="int"> + </argument> + <argument index="1" name="arg1" type="String"> + </argument> + <description> + </description> + </method> + <method name="set_input_port_type"> + <return type="void"> + </return> + <argument index="0" name="arg0" type="int"> + </argument> + <argument index="1" name="arg1" type="int"> + </argument> + <description> + </description> + </method> + <method name="set_inputs"> + <return type="void"> + </return> + <argument index="0" name="inputs" type="String"> + </argument> + <description> + </description> + </method> + <method name="set_output_port_name"> + <return type="void"> + </return> + <argument index="0" name="arg0" type="int"> + </argument> + <argument index="1" name="arg1" type="String"> + </argument> + <description> + </description> + </method> + <method name="set_output_port_type"> + <return type="void"> + </return> + <argument index="0" name="arg0" type="int"> + </argument> + <argument index="1" name="arg1" type="int"> + </argument> + <description> + </description> + </method> + <method name="set_outputs"> + <return type="void"> + </return> + <argument index="0" name="outputs" type="String"> + </argument> + <description> + </description> + </method> + <method name="set_size"> + <return type="void"> + </return> + <argument index="0" name="size" type="Vector2"> + </argument> + <description> + </description> + </method> + </methods> + <constants> + </constants> +</class> diff --git a/doc/classes/VisualShaderNodeScalarFunc.xml b/doc/classes/VisualShaderNodeScalarFunc.xml index 163276b3bc..b0ee422bbd 100644 --- a/doc/classes/VisualShaderNodeScalarFunc.xml +++ b/doc/classes/VisualShaderNodeScalarFunc.xml @@ -75,5 +75,7 @@ </constant> <constant name="FUNC_TRUNC" value="30" enum="Function"> </constant> + <constant name="FUNC_ONEMINUS" value="31" enum="Function"> + </constant> </constants> </class> diff --git a/doc/classes/VisualShaderNodeVectorFunc.xml b/doc/classes/VisualShaderNodeVectorFunc.xml index 71ce32c04e..e67cb2e07f 100644 --- a/doc/classes/VisualShaderNodeVectorFunc.xml +++ b/doc/classes/VisualShaderNodeVectorFunc.xml @@ -81,5 +81,7 @@ </constant> <constant name="FUNC_TRUNC" value="33" enum="Function"> </constant> + <constant name="FUNC_ONEMINUS" value="34" enum="Function"> + </constant> </constants> </class> diff --git a/doc/classes/WindowDialog.xml b/doc/classes/WindowDialog.xml index 16b7bd84ad..c5d66af984 100644 --- a/doc/classes/WindowDialog.xml +++ b/doc/classes/WindowDialog.xml @@ -13,7 +13,7 @@ <return type="TextureButton"> </return> <description> - Return the close [TextureButton]. + Returns the close [TextureButton]. </description> </method> </methods> |