diff options
Diffstat (limited to 'doc/classes')
205 files changed, 2343 insertions, 982 deletions
diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index 9eeb69d824..33afe38446 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -16,7 +16,7 @@ <return type="Variant" /> <param index="0" name="x" type="Variant" /> <description> - Returns the absolute value of a [Variant] parameter [param x] (i.e. non-negative value). Variant types [int], [float], [Vector2], [Vector2i], [Vector3] and [Vector3i] are supported. + Returns the absolute value of a [Variant] parameter [param x] (i.e. non-negative value). Supported types: [int], [float], [Vector2], [Vector2i], [Vector3], [Vector3i], [Vector4], [Vector4i]. [codeblock] var a = abs(-1) # a is 1 @@ -36,6 +36,7 @@ var f = abs(Vector3i(-7, -8, -9)) # f is (7, 8, 9) [/codeblock] + [b]Note:[/b] For better type safety, use [method absf], [method absi], [method Vector2.abs], [method Vector2i.abs], [method Vector3.abs], [method Vector3i.abs], [method Vector4.abs], or [method Vector4i.abs]. </description> </method> <method name="absf"> @@ -106,6 +107,17 @@ [/codeblock] </description> </method> + <method name="bezier_derivative"> + <return type="float" /> + <param index="0" name="start" type="float" /> + <param index="1" name="control_1" type="float" /> + <param index="2" name="control_2" type="float" /> + <param index="3" name="end" type="float" /> + <param index="4" name="t" type="float" /> + <description> + Returns the derivative at the given [param t] on a one-dimensional [url=https://en.wikipedia.org/wiki/B%C3%A9zier_curve]Bezier curve[/url] defined by the given [param control_1], [param control_2], and [param end] points. + </description> + </method> <method name="bezier_interpolate"> <return type="float" /> <param index="0" name="start" type="float" /> @@ -143,7 +155,7 @@ i = ceil(1.001) # i is 2.0 [/codeblock] See also [method floor], [method round], and [method snapped]. - [b]Note:[/b] For better type safety, see [method ceilf], [method ceili], [method Vector2.ceil], [method Vector3.ceil] and [method Vector4.ceil]. + [b]Note:[/b] For better type safety, use [method ceilf], [method ceili], [method Vector2.ceil], [method Vector3.ceil], or [method Vector4.ceil]. </description> </method> <method name="ceilf"> @@ -168,7 +180,7 @@ <param index="1" name="min" type="Variant" /> <param index="2" name="max" type="Variant" /> <description> - Clamps the [param value], returning a [Variant] not less than [param min] and not more than [param max]. Variant types [int], [float], [Vector2], [Vector2i], [Vector3] and [Vector3i] are supported. + Clamps the [param value], returning a [Variant] not less than [param min] and not more than [param max]. Supported types: [int], [float], [Vector2], [Vector2i], [Vector3], [Vector3i], [Vector4], [Vector4i]. [codeblock] var a = clamp(-10, -1, 5) # a is -1 @@ -188,6 +200,7 @@ var f = clamp(Vector3i(-7, -8, -9), Vector3i(-1, 2, 3), Vector3i(-4, -5, -6)) # f is (-4, -5, -6) [/codeblock] + [b]Note:[/b] For better type safety, use [method clampf], [method clampi], [method Vector2.clamp], [method Vector2i.clamp], [method Vector3.clamp], [method Vector3i.clamp], [method Vector4.clamp], or [method Vector4i.clamp]. </description> </method> <method name="clampf"> @@ -367,7 +380,7 @@ a = floor(-2.99) # a is -3.0 [/codeblock] See also [method ceil], [method round], and [method snapped]. - [b]Note:[/b] For better type safety, see [method floorf], [method floori], [method Vector2.floor], [method Vector3.floor] and [method Vector4.floor]. + [b]Note:[/b] For better type safety, use [method floorf], [method floori], [method Vector2.floor], [method Vector3.floor], or [method Vector4.floor]. </description> </method> <method name="floorf"> @@ -527,7 +540,7 @@ <param index="2" name="weight" type="Variant" /> <description> Linearly interpolates between two values by the factor defined in [param weight]. To perform interpolation, [param weight] should be between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values outside this range are allowed and can be used to perform [i]extrapolation[/i]. If this is not desired, use [method clamp] on the result of this function. - Both [param from] and [param to] must be the same type. Supported types: [float], [Vector2], [Vector3], [Vector4], [Color], [Quaternion], [Basis]. + Both [param from] and [param to] must be the same type. Supported types: [int], [float], [Vector2], [Vector3], [Vector4], [Color], [Quaternion], [Basis]. [codeblock] lerp(0, 4, 0.75) # Returns 3.0 [/codeblock] @@ -572,7 +585,8 @@ <return type="float" /> <param index="0" name="lin" type="float" /> <description> - Converts from linear energy to decibels (audio). This can be used to implement volume sliders that behave as expected (since volume isn't linear). Example: + Converts from linear energy to decibels (audio). This can be used to implement volume sliders that behave as expected (since volume isn't linear). + [b]Example:[/b] [codeblock] # "Slider" refers to a node that inherits Range such as HSlider or VSlider. # Its range must be configured to go from 0 to 1. @@ -782,14 +796,13 @@ </method> <method name="printraw" qualifiers="vararg"> <description> - Prints one or more arguments to strings in the best way possible to console. Unlike [method print], no newline is automatically added at the end. + Prints one or more arguments to strings in the best way possible to the OS terminal. Unlike [method print], no newline is automatically added at the end. [codeblock] printraw("A") printraw("B") printraw("C") - # Prints ABC + # Prints ABC to terminal [/codeblock] - [b]Note:[/b] Due to limitations with Godot's built-in console, this only prints to the terminal. If you need to print in the editor, use another method, such as [method print]. </description> </method> <method name="prints" qualifiers="vararg"> @@ -841,7 +854,7 @@ <return type="PackedInt64Array" /> <param index="0" name="seed" type="int" /> <description> - Given a [param seed], returns a [PackedInt64Array] of size [code]2[/code], where its first element is the randomised [int] value, and the second element is the same as [param seed]. Passing the same [param seed] consistently returns the same array. + Given a [param seed], returns a [PackedInt64Array] of size [code]2[/code], where its first element is the randomized [int] value, and the second element is the same as [param seed]. Passing the same [param seed] consistently returns the same array. [b]Note:[/b] "Seed" here refers to the internal state of the pseudo random number generator, currently implemented as a 64 bit integer. [codeblock] var a = rand_from_seed(4) @@ -949,7 +962,7 @@ round(2.6) # Returns 3 [/codeblock] See also [method floor], [method ceil], and [method snapped]. - [b]Note:[/b] For better type safety, use [method roundf], [method roundi], [method Vector2.round], [method Vector3.round] or [method Vector4.round], instead. + [b]Note:[/b] For better type safety, use [method roundf], [method roundi], [method Vector2.round], [method Vector3.round], or [method Vector4.round]. </description> </method> <method name="roundf"> @@ -986,21 +999,22 @@ <return type="Variant" /> <param index="0" name="x" type="Variant" /> <description> - Returns the sign of [param x] as same type of [Variant] as [param x] with each component being -1, 0 and 1 for each negative, zero and positive values respectively. Variant types [int], [float], [Vector2], [Vector2i], [Vector3] and [Vector3i] are supported. + Returns the same type of [Variant] as [param x], with [code]-1[/code] for negative values, [code]1[/code] for positive values, and [code]0[/code] for zeros. Supported types: [int], [float], [Vector2], [Vector2i], [Vector3], [Vector3i], [Vector4], [Vector4i]. [codeblock] sign(-6.0) # Returns -1 sign(0.0) # Returns 0 sign(6.0) # Returns 1 - sign(Vector3(-6.0, 0.0, 6.0) # Returns (-1, 0, 1) + sign(Vector3(-6.0, 0.0, 6.0)) # Returns (-1, 0, 1) [/codeblock] + [b]Note:[/b] For better type safety, use [method signf], [method signi], [method Vector2.sign], [method Vector2i.sign], [method Vector3.sign], [method Vector3i.sign], [method Vector4.sign], or [method Vector4i.sign]. </description> </method> <method name="signf"> <return type="float" /> <param index="0" name="x" type="float" /> <description> - Returns the sign of [param x] as a [float]: -1.0 or 1.0. Returns 0.0 if [param x] is 0.0. + Returns [code]-1.0[/code] if [param x] is negative, [code]1.0[/code] if [param x] is positive, and [code]0.0[/code] if if [param x] is zero. [codeblock] sign(-6.5) # Returns -1.0 sign(0.0) # Returns 0.0 @@ -1012,7 +1026,7 @@ <return type="int" /> <param index="0" name="x" type="int" /> <description> - Returns the sign of [param x] as an [int]: -1 or 1. Returns 0 if [param x] is 0. + Returns [code]-1[/code] if [param x] is negative, [code]1[/code] if [param x] is positive, and [code]0[/code] if if [param x] is zero. [codeblock] sign(-6) # Returns -1 sign(0) # Returns 0 @@ -1062,16 +1076,46 @@ </description> </method> <method name="snapped"> + <return type="Variant" /> + <param index="0" name="x" type="Variant" /> + <param index="1" name="step" type="Variant" /> + <description> + Returns the multiple of [param step] that is the closest to [param x]. This can also be used to round a floating point number to an arbitrary number of decimals. + The returned value is the same type of [Variant] as [param step]. Supported types: [int], [float], [Vector2], [Vector2i], [Vector3], [Vector3i], [Vector4], [Vector4i]. + [codeblock] + snapped(100, 32) # Returns 96 + snapped(3.14159, 0.01) # Returns 3.14 + + snapped(Vector2(34, 70), Vector2(8, 8)) # Returns (32, 72) + [/codeblock] + See also [method ceil], [method floor], and [method round]. + [b]Note:[/b] For better type safety, use [method snappedf], [method snappedi], [method Vector2.snapped], [method Vector2i.snapped], [method Vector3.snapped], [method Vector3i.snapped], [method Vector4.snapped], or [method Vector4i.snapped]. + </description> + </method> + <method name="snappedf"> <return type="float" /> <param index="0" name="x" type="float" /> <param index="1" name="step" type="float" /> <description> - Snaps the float value [param x] to a given [param step]. This can also be used to round a floating point number to an arbitrary number of decimals. + Returns the multiple of [param step] that is the closest to [param x]. This can also be used to round a floating point number to an arbitrary number of decimals. + A type-safe version of [method snapped], returning a [float]. [codeblock] - snapped(100, 32) # Returns 96 - snapped(3.14159, 0.01) # Returns 3.14 + snapped(32.0, 2.5) # Returns 32.5 + snapped(3.14159, 0.01) # Returns 3.14 + [/codeblock] + </description> + </method> + <method name="snappedi"> + <return type="int" /> + <param index="0" name="x" type="float" /> + <param index="1" name="step" type="int" /> + <description> + Returns the multiple of [param step] that is the closest to [param x]. + A type-safe version of [method snapped], returning an [int]. + [codeblock] + snapped(53, 16) # Returns 48 + snapped(4096, 100) # Returns 4100 [/codeblock] - See also [method ceil], [method floor], and [method round]. </description> </method> <method name="sqrt"> @@ -1465,6 +1509,24 @@ <constant name="INLINE_ALIGNMENT_TEXT_MASK" value="12" enum="InlineAlignment"> A bit mask for [code]INLINE_ALIGNMENT_TO_*[/code] alignment constants. </constant> + <constant name="EULER_ORDER_XYZ" value="0" enum="EulerOrder"> + Specifies that Euler angles should be in XYZ order. When composing, the order is X, Y, Z. When decomposing, the order is reversed, first Z, then Y, and X last. + </constant> + <constant name="EULER_ORDER_XZY" value="1" enum="EulerOrder"> + Specifies that Euler angles should be in XZY order. When composing, the order is X, Z, Y. When decomposing, the order is reversed, first Y, then Z, and X last. + </constant> + <constant name="EULER_ORDER_YXZ" value="2" enum="EulerOrder"> + Specifies that Euler angles should be in YXZ order. When composing, the order is Y, X, Z. When decomposing, the order is reversed, first Z, then X, and Y last. + </constant> + <constant name="EULER_ORDER_YZX" value="3" enum="EulerOrder"> + Specifies that Euler angles should be in YZX order. When composing, the order is Y, Z, X. When decomposing, the order is reversed, first X, then Z, and Y last. + </constant> + <constant name="EULER_ORDER_ZXY" value="4" enum="EulerOrder"> + Specifies that Euler angles should be in ZXY order. When composing, the order is Z, X, Y. When decomposing, the order is reversed, first Y, then X, and Z last. + </constant> + <constant name="EULER_ORDER_ZYX" value="5" enum="EulerOrder"> + Specifies that Euler angles should be in ZYX order. When composing, the order is Z, Y, X. When decomposing, the order is reversed, first X, then Y, and Z last. + </constant> <constant name="KEY_NONE" value="0" enum="Key"> Enum value which doesn't correspond to any key. This is used to initialize [enum Key] properties with a generic state. </constant> @@ -2487,7 +2549,8 @@ </constant> <constant name="OK" value="0" enum="Error"> Methods that return [enum Error] return [constant OK] when no error occurred. - Since [constant OK] has value 0, and all other error constants are positive integers, it can also be used in boolean checks. For example: + Since [constant OK] has value 0, and all other error constants are positive integers, it can also be used in boolean checks. + [b]Example:[/b] [codeblock] var error = method_that_returns_error() if error != OK: @@ -2648,7 +2711,8 @@ The property has no hint for the editor. </constant> <constant name="PROPERTY_HINT_RANGE" value="1" enum="PropertyHint"> - Hints that an [int] or [float] property should be within a range specified via the hint string [code]"min,max"[/code] or [code]"min,max,step"[/code]. The hint string can optionally include [code]"or_greater"[/code] and/or [code]"or_less"[/code] to allow manual input going respectively above the max or below the min values. Example: [code]"-360,360,1,or_greater,or_less"[/code]. + Hints that an [int] or [float] property should be within a range specified via the hint string [code]"min,max"[/code] or [code]"min,max,step"[/code]. The hint string can optionally include [code]"or_greater"[/code] and/or [code]"or_less"[/code] to allow manual input going respectively above the max or below the min values. + [b]Example:[/b] [code]"-360,360,1,or_greater,or_less"[/code]. Additionally, other keywords can be included: [code]"exp"[/code] for exponential range editing, [code]"radians"[/code] for editing radian angles in degrees, [code]"degrees"[/code] to hint at an angle and [code]"hide_slider"[/code] to hide the slider. </constant> <constant name="PROPERTY_HINT_ENUM" value="2" enum="PropertyHint"> @@ -2713,16 +2777,10 @@ <constant name="PROPERTY_HINT_COLOR_NO_ALPHA" value="21" enum="PropertyHint"> Hints that a [Color] property should be edited without affecting its transparency ([member Color.a] is not editable). </constant> - <constant name="PROPERTY_HINT_IMAGE_COMPRESS_LOSSY" value="22" enum="PropertyHint"> - Hints that an image is compressed using lossy compression. The editor does not internally use this property hint. - </constant> - <constant name="PROPERTY_HINT_IMAGE_COMPRESS_LOSSLESS" value="23" enum="PropertyHint"> - Hints that an image is compressed using lossless compression. The editor does not internally use this property hint. - </constant> - <constant name="PROPERTY_HINT_OBJECT_ID" value="24" enum="PropertyHint"> + <constant name="PROPERTY_HINT_OBJECT_ID" value="22" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_TYPE_STRING" value="25" enum="PropertyHint"> - Hints that a property represents a particular type. If a property is [constant TYPE_STRING], allows to set a type from the create dialog. If you need to create an [Array] to contain elements of a specific type, the [code]hint_string[/code] must encode nested types using [code]":"[/code] and [code]"/"[/code] for specifying [Resource] types. For example: + <constant name="PROPERTY_HINT_TYPE_STRING" value="23" enum="PropertyHint"> + Hint that a property represents a particular type. If a property is [constant TYPE_STRING], allows to set a type from the create dialog. If you need to create an [Array] to contain elements of a specific type, the [code]hint_string[/code] must encode nested types using [code]":"[/code] and [code]"/"[/code] for specifying [Resource] types. For instance: [codeblock] hint_string = "%s:" % [TYPE_INT] # Array of integers. hint_string = "%s:%s:" % [TYPE_ARRAY, TYPE_REAL] # Two-dimensional array of floats. @@ -2731,56 +2789,53 @@ [/codeblock] [b]Note:[/b] The final colon is required for properly detecting built-in types. </constant> - <constant name="PROPERTY_HINT_NODE_PATH_TO_EDITED_NODE" value="26" enum="PropertyHint"> + <constant name="PROPERTY_HINT_NODE_PATH_TO_EDITED_NODE" value="24" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_METHOD_OF_VARIANT_TYPE" value="27" enum="PropertyHint"> + <constant name="PROPERTY_HINT_METHOD_OF_VARIANT_TYPE" value="25" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_METHOD_OF_BASE_TYPE" value="28" enum="PropertyHint"> + <constant name="PROPERTY_HINT_METHOD_OF_BASE_TYPE" value="26" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_METHOD_OF_INSTANCE" value="29" enum="PropertyHint"> + <constant name="PROPERTY_HINT_METHOD_OF_INSTANCE" value="27" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_METHOD_OF_SCRIPT" value="30" enum="PropertyHint"> + <constant name="PROPERTY_HINT_METHOD_OF_SCRIPT" value="28" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_PROPERTY_OF_VARIANT_TYPE" value="31" enum="PropertyHint"> + <constant name="PROPERTY_HINT_PROPERTY_OF_VARIANT_TYPE" value="29" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_PROPERTY_OF_BASE_TYPE" value="32" enum="PropertyHint"> + <constant name="PROPERTY_HINT_PROPERTY_OF_BASE_TYPE" value="30" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_PROPERTY_OF_INSTANCE" value="33" enum="PropertyHint"> + <constant name="PROPERTY_HINT_PROPERTY_OF_INSTANCE" value="31" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_PROPERTY_OF_SCRIPT" value="34" enum="PropertyHint"> + <constant name="PROPERTY_HINT_PROPERTY_OF_SCRIPT" value="32" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_OBJECT_TOO_BIG" value="35" enum="PropertyHint"> - Hints that a property's size (in bytes) is too big to be displayed, when debugging a running project. The debugger uses this hint internally. + <constant name="PROPERTY_HINT_OBJECT_TOO_BIG" value="33" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_NODE_PATH_VALID_TYPES" value="36" enum="PropertyHint"> + <constant name="PROPERTY_HINT_NODE_PATH_VALID_TYPES" value="34" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_SAVE_FILE" value="37" enum="PropertyHint"> + <constant name="PROPERTY_HINT_SAVE_FILE" value="35" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_GLOBAL_SAVE_FILE" value="38" enum="PropertyHint"> + <constant name="PROPERTY_HINT_GLOBAL_SAVE_FILE" value="36" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_INT_IS_OBJECTID" value="39" enum="PropertyHint"> + <constant name="PROPERTY_HINT_INT_IS_OBJECTID" value="37" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_INT_IS_POINTER" value="41" enum="PropertyHint"> + <constant name="PROPERTY_HINT_INT_IS_POINTER" value="38" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_ARRAY_TYPE" value="40" enum="PropertyHint"> + <constant name="PROPERTY_HINT_ARRAY_TYPE" value="39" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_LOCALE_ID" value="42" enum="PropertyHint"> - Hints that a [String] property is a locale code. Editing it will show a locale dialog for picking language and country. + <constant name="PROPERTY_HINT_LOCALE_ID" value="40" enum="PropertyHint"> + Hints that a string property is a locale code. Editing it will show a locale dialog for picking language and country. </constant> - <constant name="PROPERTY_HINT_LOCALIZABLE_STRING" value="43" enum="PropertyHint"> - Hints that a [Dictionary] property is string translation map. Dictionary keys are locale codes and, values are translated strings. + <constant name="PROPERTY_HINT_LOCALIZABLE_STRING" value="41" enum="PropertyHint"> + Hints that a dictionary property is string translation map. Dictionary keys are locale codes and, values are translated strings. </constant> - <constant name="PROPERTY_HINT_NODE_TYPE" value="44" enum="PropertyHint"> + <constant name="PROPERTY_HINT_NODE_TYPE" value="42" enum="PropertyHint"> </constant> - <constant name="PROPERTY_HINT_HIDE_QUATERNION_EDIT" value="45" enum="PropertyHint"> - Hints that a [Quaternion] property should disable the temporary euler editor. + <constant name="PROPERTY_HINT_HIDE_QUATERNION_EDIT" value="43" enum="PropertyHint"> + Hints that a quaternion property should disable the temporary euler editor. </constant> - <constant name="PROPERTY_HINT_PASSWORD" value="46" enum="PropertyHint"> - Hints that a [String] property is a password. Every character of the string is displayed as the secret character (typically [code]*[/code]). - An optional placeholder text can be shown on its input field, similarly to [constant PROPERTY_HINT_PLACEHOLDER_TEXT]. + <constant name="PROPERTY_HINT_PASSWORD" value="44" enum="PropertyHint"> + Hints that a string property is a password, and every character is replaced with the secret character. </constant> - <constant name="PROPERTY_HINT_MAX" value="47" enum="PropertyHint"> - Represents the size of the [enum PropertyHint] enum. + <constant name="PROPERTY_HINT_MAX" value="45" enum="PropertyHint"> </constant> <constant name="PROPERTY_USAGE_NONE" value="0" enum="PropertyUsageFlags"> The property is not stored, and does not display in the editor. This is the default for non-exported properties. @@ -2789,13 +2844,13 @@ The property is serialized and saved in the scene file (default). </constant> <constant name="PROPERTY_USAGE_EDITOR" value="4" enum="PropertyUsageFlags"> - The property is shown in the editor Inspector (default). + The property is shown in the [EditorInspector] (default). </constant> <constant name="PROPERTY_USAGE_CHECKABLE" value="8" enum="PropertyUsageFlags"> - The property can be checked in the editor inspector. + The property can be checked in the [EditorInspector]. </constant> <constant name="PROPERTY_USAGE_CHECKED" value="16" enum="PropertyUsageFlags"> - The property is checked in the editor inspector. + The property is checked in the [EditorInspector]. </constant> <constant name="PROPERTY_USAGE_INTERNATIONALIZED" value="32" enum="PropertyUsageFlags"> The property is a translatable string. @@ -2853,7 +2908,7 @@ <constant name="PROPERTY_USAGE_EDITOR_BASIC_SETTING" value="134217728" enum="PropertyUsageFlags"> </constant> <constant name="PROPERTY_USAGE_READ_ONLY" value="268435456" enum="PropertyUsageFlags"> - The property is read-only in the editor Inspector. + The property is read-only in the [EditorInspector]. </constant> <constant name="PROPERTY_USAGE_ARRAY" value="536870912" enum="PropertyUsageFlags"> The property is an array. diff --git a/doc/classes/AcceptDialog.xml b/doc/classes/AcceptDialog.xml index b5a1461876..4da9e41ca8 100644 --- a/doc/classes/AcceptDialog.xml +++ b/doc/classes/AcceptDialog.xml @@ -62,7 +62,7 @@ Sets autowrapping for the text in the dialog. </member> <member name="dialog_close_on_escape" type="bool" setter="set_close_on_escape" getter="get_close_on_escape" default="true"> - If [code]true[/code], the dialog will be hidden when the escape key ([constant @GlobalScope.KEY_ESCAPE]) is pressed. + If [code]true[/code], the dialog will be hidden when the escape key ([constant KEY_ESCAPE]) is pressed. </member> <member name="dialog_hide_on_ok" type="bool" setter="set_hide_on_ok" getter="get_hide_on_ok" default="true"> If [code]true[/code], the dialog is hidden when the OK button is pressed. You can set it to [code]false[/code] if you want to do e.g. input validation when receiving the [signal confirmed] signal, and handle hiding the dialog in your own logic. diff --git a/doc/classes/AnimatedTexture.xml b/doc/classes/AnimatedTexture.xml index f0c86ba47b..57a7f86901 100644 --- a/doc/classes/AnimatedTexture.xml +++ b/doc/classes/AnimatedTexture.xml @@ -57,6 +57,7 @@ <member name="pause" type="bool" setter="set_pause" getter="get_pause" default="false"> If [code]true[/code], the animation will pause where it currently is (i.e. at [member current_frame]). The animation will continue from where it was paused when changing this property to [code]false[/code]. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="speed_scale" type="float" setter="set_speed_scale" getter="get_speed_scale" default="1.0"> The animation speed is multiplied by this value. If set to a negative value, the animation is played in reverse. </member> diff --git a/doc/classes/Animation.xml b/doc/classes/Animation.xml index df0fb11ac7..af8d9c416f 100644 --- a/doc/classes/Animation.xml +++ b/doc/classes/Animation.xml @@ -26,6 +26,7 @@ [/csharp] [/codeblocks] Animations are just data containers, and must be added to nodes such as an [AnimationPlayer] to be played back. Animation tracks have different types, each with its own set of dedicated methods. Check [enum TrackType] to see available types. + [b]Note:[/b] For 3D position/rotation/scale, using the dedicated [constant TYPE_POSITION_3D], [constant TYPE_ROTATION_3D] and [constant TYPE_SCALE_3D] track types instead of [constant TYPE_VALUE] is recommended for performance reasons. </description> <tutorials> <link title="Animation documentation index">$DOCS_URL/tutorials/animation/index.html</link> @@ -209,6 +210,7 @@ <param index="1" name="time" type="float" /> <param index="2" name="amount" type="float" /> <description> + Inserts a key in a given blend shape track. Returns the key index. </description> </method> <method name="clear"> @@ -223,6 +225,8 @@ <param index="1" name="fps" type="int" default="120" /> <param index="2" name="split_tolerance" type="float" default="4.0" /> <description> + Compress the animation and all its tracks in-place. This will make [method track_is_compressed] return [code]true[/code] once called on this [Animation]. Compressed tracks require less memory to be played, and are designed to be used for complex 3D animations (such as cutscenes) imported from external 3D software. Compression is lossy, but the difference is usually not noticeable in real world conditions. + [b]Note:[/b] Compressed tracks have various limitations (such as not being editable from the editor), so only use compressed animations if you actually need them. </description> </method> <method name="copy_track"> @@ -278,6 +282,7 @@ <param index="1" name="time" type="float" /> <param index="2" name="position" type="Vector3" /> <description> + Inserts a key in a given 3D position track. Returns the key index. </description> </method> <method name="remove_track"> @@ -293,6 +298,7 @@ <param index="1" name="time" type="float" /> <param index="2" name="rotation" type="Quaternion" /> <description> + Inserts a key in a given 3D rotation track. Returns the key index. </description> </method> <method name="scale_track_insert_key"> @@ -301,6 +307,7 @@ <param index="1" name="time" type="float" /> <param index="2" name="scale" type="Vector3" /> <description> + Inserts a key in a given 3D scale track. Returns the key index. </description> </method> <method name="track_find_key" qualifiers="const"> @@ -385,6 +392,7 @@ <return type="bool" /> <param index="0" name="track_idx" type="int" /> <description> + Returns [code]true[/code] if the track is compressed, [code]false[/code] otherwise. See also [method compress]. </description> </method> <method name="track_is_enabled" qualifiers="const"> @@ -560,24 +568,21 @@ The animation step value. </member> </members> - <signals> - <signal name="tracks_changed"> - <description> - Emitted when there's a change in the list of tracks, e.g. tracks are added, moved or have changed paths. - </description> - </signal> - </signals> <constants> <constant name="TYPE_VALUE" value="0" enum="TrackType"> - Value tracks set values in node properties, but only those which can be Interpolated. + Value tracks set values in node properties, but only those which can be interpolated. For 3D position/rotation/scale, using the dedicated [constant TYPE_POSITION_3D], [constant TYPE_ROTATION_3D] and [constant TYPE_SCALE_3D] track types instead of [constant TYPE_VALUE] is recommended for performance reasons. </constant> <constant name="TYPE_POSITION_3D" value="1" enum="TrackType"> + 3D position track (values are stored in [Vector3]s). </constant> <constant name="TYPE_ROTATION_3D" value="2" enum="TrackType"> + 3D rotation track (values are stored in [Quaternion]s). </constant> <constant name="TYPE_SCALE_3D" value="3" enum="TrackType"> + 3D scale track (values are stored in [Vector3]s). </constant> <constant name="TYPE_BLEND_SHAPE" value="4" enum="TrackType"> + Blend shape track. </constant> <constant name="TYPE_METHOD" value="5" enum="TrackType"> Method tracks call functions with given arguments per key. @@ -598,7 +603,7 @@ Linear interpolation. </constant> <constant name="INTERPOLATION_CUBIC" value="2" enum="InterpolationType"> - Cubic interpolation. + Cubic interpolation. This looks smoother than linear interpolation, but is more expensive to interpolate. Stick to [constant INTERPOLATION_LINEAR] for complex 3D animations imported from external software, even if it requires using a higher animation framerate in return. </constant> <constant name="INTERPOLATION_LINEAR_ANGLE" value="3" enum="InterpolationType"> Linear interpolation with shortest path rotation. diff --git a/doc/classes/AnimationPlayer.xml b/doc/classes/AnimationPlayer.xml index bf5ac7fa9e..9efd3ac939 100644 --- a/doc/classes/AnimationPlayer.xml +++ b/doc/classes/AnimationPlayer.xml @@ -217,7 +217,7 @@ </member> <member name="current_animation" type="String" setter="set_current_animation" getter="get_current_animation" default=""""> The key of the currently playing animation. If no animation is playing, the property's value is an empty string. Changing this value does not restart the animation. See [method play] for more information on playing animations. - [b]Note:[/b] while this property appears in the inspector, it's not meant to be edited, and it's not saved in the scene. This property is mainly used to get the currently playing animation, and internally for animation playback tracks. For more information, see [Animation]. + [b]Note:[/b] While this property appears in the Inspector, it's not meant to be edited, and it's not saved in the scene. This property is mainly used to get the currently playing animation, and internally for animation playback tracks. For more information, see [Animation]. </member> <member name="current_animation_length" type="float" setter="" getter="get_current_animation_length"> The length (in seconds) of the currently playing animation. diff --git a/doc/classes/Array.xml b/doc/classes/Array.xml index 0f76639caf..603974d619 100644 --- a/doc/classes/Array.xml +++ b/doc/classes/Array.xml @@ -272,6 +272,7 @@ array.Fill(0); // Initialize the 10 elements to 0. [/csharp] [/codeblocks] + [b]Note:[/b] If [param value] is of a reference type ([Object]-derived, [Array], [Dictionary], etc.) then the array is filled with the references to the same object, i.e. no duplicates are created. </description> </method> <method name="filter" qualifiers="const"> @@ -299,13 +300,6 @@ Searches the array for a value and returns its index or [code]-1[/code] if not found. Optionally, the initial search index can be passed. </description> </method> - <method name="find_last" qualifiers="const"> - <return type="int" /> - <param index="0" name="value" type="Variant" /> - <description> - Searches the array in reverse order for a value and returns its index or [code]-1[/code] if not found. - </description> - </method> <method name="front" qualifiers="const"> <return type="Variant" /> <description> @@ -316,13 +310,13 @@ <method name="get_typed_builtin" qualifiers="const"> <return type="int" /> <description> - Returns the [code]TYPE[/code] constant for a typed array. If the [Array] is not typed, returns [constant @GlobalScope.TYPE_NIL]. + Returns the [enum Variant.Type] constant for a typed array. If the [Array] is not typed, returns [constant TYPE_NIL]. </description> </method> <method name="get_typed_class_name" qualifiers="const"> <return type="StringName" /> <description> - Returns a class name of a typed [Array] of type [constant @GlobalScope.TYPE_OBJECT]. + Returns a class name of a typed [Array] of type [constant TYPE_OBJECT]. </description> </method> <method name="get_typed_script" qualifiers="const"> @@ -352,7 +346,6 @@ GD.Print(arr.Contains("7")); // False [/csharp] [/codeblocks] - [b]Note:[/b] This is equivalent to using the [code]in[/code] operator as follows: [codeblocks] [gdscript] @@ -542,7 +535,7 @@ <param index="1" name="class_name" type="StringName" /> <param index="2" name="script" type="Variant" /> <description> - Makes the [Array] typed. The [param type] should be one of the [@GlobalScope] [code]TYPE[/code] constants. [param class_name] is optional and can only be provided for [constant @GlobalScope.TYPE_OBJECT]. [param script] can only be provided if [param class_name] is not empty. + Makes the [Array] typed. The [param type] should be one of the [enum Variant.Type] constants. [param class_name] is optional and can only be provided for [constant TYPE_OBJECT]. [param script] can only be provided if [param class_name] is not empty. The method fails if an array is already typed. </description> </method> diff --git a/doc/classes/ArrayMesh.xml b/doc/classes/ArrayMesh.xml index ab948dd0de..b9c8ab0f6c 100644 --- a/doc/classes/ArrayMesh.xml +++ b/doc/classes/ArrayMesh.xml @@ -25,10 +25,12 @@ m.mesh = arr_mesh [/gdscript] [csharp] - var vertices = new Godot.Collections.Array<Vector3>(); - vertices.Add(new Vector3(0, 1, 0)); - vertices.Add(new Vector3(1, 0, 0)); - vertices.Add(new Vector3(0, 0, 1)); + var vertices = new Vector3[] + { + new Vector3(0, 1, 0), + new Vector3(1, 0, 0), + new Vector3(0, 0, 1), + }; // Initialize the ArrayMesh. var arrMesh = new ArrayMesh(); @@ -38,7 +40,7 @@ // Create the Mesh. arrMesh.AddSurfaceFromArrays(Mesh.PrimitiveType.Triangles, arrays); - var m = new MeshInstance(); + var m = new MeshInstance3D(); m.Mesh = arrMesh; [/csharp] [/codeblocks] diff --git a/doc/classes/AtlasTexture.xml b/doc/classes/AtlasTexture.xml index 809d983a9d..fc75459e46 100644 --- a/doc/classes/AtlasTexture.xml +++ b/doc/classes/AtlasTexture.xml @@ -23,5 +23,6 @@ <member name="region" type="Rect2" setter="set_region" getter="get_region" default="Rect2(0, 0, 0, 0)"> The region used to draw the [member atlas]. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> </members> </class> diff --git a/doc/classes/AudioEffectDistortion.xml b/doc/classes/AudioEffectDistortion.xml index 6bd8522459..ef39a9c60e 100644 --- a/doc/classes/AudioEffectDistortion.xml +++ b/doc/classes/AudioEffectDistortion.xml @@ -2,11 +2,11 @@ <class name="AudioEffectDistortion" inherits="AudioEffect" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> Adds a distortion audio effect to an Audio bus. - Modify the sound to make it distorted. + Modifies the sound to make it distorted. </brief_description> <description> Different types are available: clip, tan, lo-fi (bit crushing), overdrive, or waveshape. - By distorting the waveform the frequency content change, which will often make the sound "crunchy" or "abrasive". For games, it can simulate sound coming from some saturated device or speaker very efficiently. + By distorting the waveform the frequency content changes, which will often make the sound "crunchy" or "abrasive". For games, it can simulate sound coming from some saturated device or speaker very efficiently. </description> <tutorials> <link title="Audio buses">$DOCS_URL/tutorials/audio/audio_buses.html</link> @@ -22,10 +22,10 @@ Distortion type. </member> <member name="post_gain" type="float" setter="set_post_gain" getter="get_post_gain" default="0.0"> - Increases or decreases the volume after the effect. Value can range from -80 to 24. + Increases or decreases the volume after the effect, in decibels. Value can range from -80 to 24. </member> <member name="pre_gain" type="float" setter="set_pre_gain" getter="get_pre_gain" default="0.0"> - Increases or decreases the volume before the effect. Value can range from -60 to 60. + Increases or decreases the volume before the effect, in decibels. Value can range from -60 to 60. </member> </members> <constants> @@ -35,10 +35,10 @@ <constant name="MODE_ATAN" value="1" enum="Mode"> </constant> <constant name="MODE_LOFI" value="2" enum="Mode"> - Low-resolution digital distortion effect. You can use it to emulate the sound of early digital audio devices. + Low-resolution digital distortion effect (bit depth reduction). You can use it to emulate the sound of early digital audio devices. </constant> <constant name="MODE_OVERDRIVE" value="3" enum="Mode"> - Emulates the warm distortion produced by a field effect transistor, which is commonly used in solid-state musical instrument amplifiers. + Emulates the warm distortion produced by a field effect transistor, which is commonly used in solid-state musical instrument amplifiers. The [member drive] property has no effect in this mode. </constant> <constant name="MODE_WAVESHAPE" value="4" enum="Mode"> Waveshaper distortions are used mainly by electronic musicians to achieve an extra-abrasive sound. diff --git a/doc/classes/AudioStreamPlayer2D.xml b/doc/classes/AudioStreamPlayer2D.xml index ae86fd0e66..81755b580f 100644 --- a/doc/classes/AudioStreamPlayer2D.xml +++ b/doc/classes/AudioStreamPlayer2D.xml @@ -29,7 +29,7 @@ <return type="void" /> <param index="0" name="from_position" type="float" default="0.0" /> <description> - Plays the audio from the given position [param from_position], in seconds. + Queues the audio to play on the next physics frame, from the given position [param from_position], in seconds. </description> </method> <method name="seek"> @@ -73,7 +73,7 @@ The pitch and the tempo of the audio, as a multiplier of the audio sample's sample rate. </member> <member name="playing" type="bool" setter="_set_playing" getter="is_playing" default="false"> - If [code]true[/code], audio is playing. + If [code]true[/code], audio is playing or is queued to be played (see [method play]). </member> <member name="stream" type="AudioStream" setter="set_stream" getter="get_stream"> The [AudioStream] object to be played. diff --git a/doc/classes/AudioStreamPlayer3D.xml b/doc/classes/AudioStreamPlayer3D.xml index 11d6e9cc7a..f711210ca1 100644 --- a/doc/classes/AudioStreamPlayer3D.xml +++ b/doc/classes/AudioStreamPlayer3D.xml @@ -29,7 +29,7 @@ <return type="void" /> <param index="0" name="from_position" type="float" default="0.0" /> <description> - Plays the audio from the given position [param from_position], in seconds. + Queues the audio to play on the next physics frame, from the given position [param from_position], in seconds. </description> </method> <method name="seek"> @@ -94,7 +94,7 @@ The pitch and the tempo of the audio, as a multiplier of the audio sample's sample rate. </member> <member name="playing" type="bool" setter="_set_playing" getter="is_playing" default="false"> - If [code]true[/code], audio is playing. + If [code]true[/code], audio is playing or is queued to be played (see [method play]). </member> <member name="stream" type="AudioStream" setter="set_stream" getter="get_stream"> The [AudioStream] resource to be played. diff --git a/doc/classes/BaseButton.xml b/doc/classes/BaseButton.xml index 47e1f85c97..c92e39e08a 100644 --- a/doc/classes/BaseButton.xml +++ b/doc/classes/BaseButton.xml @@ -44,34 +44,38 @@ </method> </methods> <members> - <member name="action_mode" type="int" setter="set_action_mode" getter="get_action_mode" enum="BaseButton.ActionMode"> + <member name="action_mode" type="int" setter="set_action_mode" getter="get_action_mode" enum="BaseButton.ActionMode" default="1"> Determines when the button is considered clicked, one of the [enum ActionMode] constants. </member> <member name="button_group" type="ButtonGroup" setter="set_button_group" getter="get_button_group"> The [ButtonGroup] associated with the button. Not to be confused with node groups. </member> - <member name="button_mask" type="int" setter="set_button_mask" getter="get_button_mask" enum="MouseButton"> + <member name="button_mask" type="int" setter="set_button_mask" getter="get_button_mask" enum="MouseButton" default="1"> Binary mask to choose which mouse buttons this button will respond to. To allow both left-click and right-click, use [code]MOUSE_BUTTON_MASK_LEFT | MOUSE_BUTTON_MASK_RIGHT[/code]. </member> - <member name="button_pressed" type="bool" setter="set_pressed" getter="is_pressed"> + <member name="button_pressed" type="bool" setter="set_pressed" getter="is_pressed" default="false"> If [code]true[/code], the button's state is pressed. Means the button is pressed down or toggled (if [member toggle_mode] is active). Only works if [member toggle_mode] is [code]true[/code]. [b]Note:[/b] Setting [member button_pressed] will result in [signal toggled] to be emitted. If you want to change the pressed state without emitting that signal, use [method set_pressed_no_signal]. </member> - <member name="disabled" type="bool" setter="set_disabled" getter="is_disabled"> + <member name="disabled" type="bool" setter="set_disabled" getter="is_disabled" default="false"> If [code]true[/code], the button is in disabled state and can't be clicked or toggled. </member> - <member name="keep_pressed_outside" type="bool" setter="set_keep_pressed_outside" getter="is_keep_pressed_outside"> + <member name="focus_mode" type="int" setter="set_focus_mode" getter="get_focus_mode" overrides="Control" enum="Control.FocusMode" default="2" /> + <member name="keep_pressed_outside" type="bool" setter="set_keep_pressed_outside" getter="is_keep_pressed_outside" default="false"> If [code]true[/code], the button stays pressed when moving the cursor outside the button while pressing it. [b]Note:[/b] This property only affects the button's visual appearance. Signals will be emitted at the same moment regardless of this property's value. </member> <member name="shortcut" type="Shortcut" setter="set_shortcut" getter="get_shortcut"> [Shortcut] associated to the button. </member> - <member name="shortcut_in_tooltip" type="bool" setter="set_shortcut_in_tooltip" getter="is_shortcut_in_tooltip_enabled"> + <member name="shortcut_feedback" type="bool" setter="set_shortcut_feedback" getter="is_shortcut_feedback" default="true"> + If [code]true[/code], the button will appear pressed when its shortcut is activated. If [code]false[/code] and [member toggle_mode] is [code]false[/code], the shortcut will activate the button without appearing to press the button. + </member> + <member name="shortcut_in_tooltip" type="bool" setter="set_shortcut_in_tooltip" getter="is_shortcut_in_tooltip_enabled" default="true"> If [code]true[/code], the button will add information about its shortcut in the tooltip. </member> - <member name="toggle_mode" type="bool" setter="set_toggle_mode" getter="is_toggle_mode"> + <member name="toggle_mode" type="bool" setter="set_toggle_mode" getter="is_toggle_mode" default="false"> If [code]true[/code], the button is in toggle mode. Makes the button flip state between pressed and unpressed each time its area is clicked. </member> </members> diff --git a/doc/classes/BaseMaterial3D.xml b/doc/classes/BaseMaterial3D.xml index dbc7d0fb29..fbb31cadcd 100644 --- a/doc/classes/BaseMaterial3D.xml +++ b/doc/classes/BaseMaterial3D.xml @@ -115,7 +115,7 @@ The color used by the backlight effect. Represents the light passing through an object. </member> <member name="backlight_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> - If [code]true[/code], the backlight effect is enabled. + If [code]true[/code], the backlight effect is enabled. See also [member subsurf_scatter_transmittance_enabled]. </member> <member name="backlight_texture" type="Texture2D" setter="set_texture" getter="get_texture"> Texture used to control the backlight effect per-pixel. Added to [member backlight]. @@ -289,6 +289,7 @@ [b]Note:[/b] If [member detail_enabled] is [code]true[/code], the [member detail_albedo] texture is drawn [i]below[/i] the [member normal_texture]. To display a normal map [i]above[/i] the [member detail_albedo] texture, use [member detail_normal] instead. </member> <member name="orm_texture" type="Texture2D" setter="set_texture" getter="get_texture"> + The Occlusion/Roughness/Metallic texture to use. This is a more efficient replacement of [member ao_texture], [member roughness_texture] and [member metallic_texture] in [ORMMaterial3D]. Ambient occlusion is stored in the red channel. Roughness map is stored in the green channel. Metallic map is stored in the blue channel. The alpha channel is ignored. </member> <member name="particles_anim_h_frames" type="int" setter="set_particles_anim_h_frames" getter="get_particles_anim_h_frames"> The number of horizontal frames in the particle sprite sheet. Only enabled when using [constant BILLBOARD_PARTICLES]. See [member billboard_mode]. @@ -350,13 +351,13 @@ </member> <member name="specular_mode" type="int" setter="set_specular_mode" getter="get_specular_mode" enum="BaseMaterial3D.SpecularMode" default="0"> The method for rendering the specular blob. See [enum SpecularMode]. - [b]Note:[/b] Only applies to the specular blob. Does not affect specular reflections from the Sky, SSR, or ReflectionProbes. + [b]Note:[/b] [member specular_mode] only applies to the specular blob. It does not affect specular reflections from the sky, screen-space reflections, [VoxelGI], SDFGI or [ReflectionProbe]s. To disable reflections from these sources as well, set [member metallic_specular] to [code]0.0[/code] instead. </member> <member name="subsurf_scatter_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> If [code]true[/code], subsurface scattering is enabled. Emulates light that penetrates an object's surface, is scattered, and then emerges. </member> <member name="subsurf_scatter_skin_mode" type="bool" setter="set_flag" getter="get_flag" default="false"> - If [code]true[/code], subsurface scattering will use a special mode optimized for the color and density of human skin. + If [code]true[/code], subsurface scattering will use a special mode optimized for the color and density of human skin, such as boosting the intensity of the red channel in subsurface scattering. </member> <member name="subsurf_scatter_strength" type="float" setter="set_subsurface_scattering_strength" getter="get_subsurface_scattering_strength" default="0.0"> The strength of the subsurface scattering effect. @@ -365,14 +366,19 @@ Texture used to control the subsurface scattering strength. Stored in the red texture channel. Multiplied by [member subsurf_scatter_strength]. </member> <member name="subsurf_scatter_transmittance_boost" type="float" setter="set_transmittance_boost" getter="get_transmittance_boost" default="0.0"> + The intensity of the subsurface scattering transmittance effect. </member> <member name="subsurf_scatter_transmittance_color" type="Color" setter="set_transmittance_color" getter="get_transmittance_color" default="Color(1, 1, 1, 1)"> + The color to multiply the subsurface scattering transmittance effect with. Ignored if [member subsurf_scatter_skin_mode] is [code]true[/code]. </member> <member name="subsurf_scatter_transmittance_depth" type="float" setter="set_transmittance_depth" getter="get_transmittance_depth" default="0.1"> + The depth of the subsurface scattering transmittance effect. </member> <member name="subsurf_scatter_transmittance_enabled" type="bool" setter="set_feature" getter="get_feature" default="false"> + If [code]true[/code], enables subsurface scattering transmittance. Only effective if [member subsurf_scatter_enabled] is [code]true[/code]. See also [member backlight_enabled]. </member> <member name="subsurf_scatter_transmittance_texture" type="Texture2D" setter="set_texture" getter="get_texture"> + The texture to use for multiplying the intensity of the subsurface scattering transmitteance intensity. See also [member subsurf_scatter_texture]. Ignored if [member subsurf_scatter_skin_mode] is [code]true[/code]. </member> <member name="texture_filter" type="int" setter="set_texture_filter" getter="get_texture_filter" enum="BaseMaterial3D.TextureFilter" default="3"> Filter flags for the texture. See [enum TextureFilter] for options. @@ -385,6 +391,7 @@ If [code]true[/code], transparency is enabled on the body. See also [member blend_mode]. </member> <member name="use_particle_trails" type="bool" setter="set_flag" getter="get_flag" default="false"> + If [code]true[/code], enables parts of the shader required for [GPUParticles3D] trails to function. This also requires using a mesh with appropriate skinning, such as [RibbonTrailMesh] or [TubeTrailMesh]. Enabling this feature outside of materials used in [GPUParticles3D] meshes will break material rendering. </member> <member name="use_point_size" type="bool" setter="set_flag" getter="get_flag" default="false"> If [code]true[/code], render point size can be changed. @@ -522,13 +529,13 @@ The material will use the texture's alpha values for transparency. </constant> <constant name="TRANSPARENCY_ALPHA_SCISSOR" value="2" enum="Transparency"> - The material will cut off all values below a threshold, the rest will remain opaque. + The material will cut off all values below a threshold, the rest will remain opaque. The opaque portions will be rendering in the depth prepass. </constant> <constant name="TRANSPARENCY_ALPHA_HASH" value="3" enum="Transparency"> The material will cut off all values below a spatially-deterministic threshold, the rest will remain opaque. </constant> <constant name="TRANSPARENCY_ALPHA_DEPTH_PRE_PASS" value="4" enum="Transparency"> - The material will use the texture's alpha value for transparency, but will still be rendered in the pre-pass. + The material will use the texture's alpha value for transparency, but will still be rendered in the depth prepass. </constant> <constant name="TRANSPARENCY_MAX" value="5" enum="Transparency"> Represents the size of the [enum Transparency] enum. @@ -606,13 +613,14 @@ Enables AlphaToCoverage and forces all non-zero alpha values to [code]1[/code]. Alpha values in the material are passed to the AntiAliasing sample mask. </constant> <constant name="DEPTH_DRAW_OPAQUE_ONLY" value="0" enum="DepthDrawMode"> - Default depth draw mode. Depth is drawn only for opaque objects. + Default depth draw mode. Depth is drawn only for opaque objects during the opaque prepass (if any) and during the opaque pass. </constant> <constant name="DEPTH_DRAW_ALWAYS" value="1" enum="DepthDrawMode"> - Depth draw is calculated for both opaque and transparent objects. + Objects will write to depth during the opaque and the transparent passes. Transparent objects that are close to the camera may obscure other transparent objects behind them. + [b]Note:[/b] This does not influence whether transparent objects are included in the depth prepass or not. For that, see [enum Transparency]. </constant> <constant name="DEPTH_DRAW_DISABLED" value="2" enum="DepthDrawMode"> - No depth draw. + Objects will not write their depth to the depth buffer, even during the depth prepass (if enabled). </constant> <constant name="CULL_BACK" value="0" enum="CullMode"> Default cull mode. The back of the object is culled when not visible. Back face triangles will be culled when facing the camera. This results in only the front side of triangles being drawn. For closed-surface meshes this means that only the exterior of the mesh will be visible. @@ -624,7 +632,7 @@ No culling is performed. </constant> <constant name="FLAG_DISABLE_DEPTH_TEST" value="0" enum="Flags"> - Disables the depth test, so this object is drawn on top of all others. However, objects drawn after it in the draw order may cover it. + Disables the depth test, so this object is drawn on top of all others drawn before it. This puts the object in the transparent draw pass where it is sorted based on distance to camera. Objects drawn after it in the draw order may cover it. This also disables writing to depth. </constant> <constant name="FLAG_ALBEDO_FROM_VERTEX_COLOR" value="1" enum="Flags"> Set [code]ALBEDO[/code] to the per-vertex color specified in the mesh. @@ -682,6 +690,7 @@ Enables the skin mode for subsurface scattering which is used to improve the look of subsurface scattering when used for human skin. </constant> <constant name="FLAG_PARTICLE_TRAILS_MODE" value="19" enum="Flags"> + Enables parts of the shader required for [GPUParticles3D] trails to function. This also requires using a mesh with appropriate skinning, such as [RibbonTrailMesh] or [TubeTrailMesh]. Enabling this feature outside of materials used in [GPUParticles3D] meshes will break material rendering. </constant> <constant name="FLAG_ALBEDO_TEXTURE_MSDF" value="20" enum="Flags"> Enables multichannel signed distance field rendering shader. diff --git a/doc/classes/Basis.xml b/doc/classes/Basis.xml index 0f1f4b57a9..acc2fd34dd 100644 --- a/doc/classes/Basis.xml +++ b/doc/classes/Basis.xml @@ -70,7 +70,7 @@ <param index="0" name="euler" type="Vector3" /> <param index="1" name="order" type="int" default="2" /> <description> - Creates a [Basis] from the given [Vector3] representing Euler angles. [param order] determines in what order rotation components are applied. Defaults to [constant EULER_ORDER_YXZ]. + Constructs a pure rotation Basis matrix from Euler angles in the specified Euler rotation order. By default, use YXZ order (most common). See the [enum EulerOrder] enum for possible values. </description> </method> <method name="from_scale" qualifiers="static"> @@ -197,24 +197,6 @@ </member> </members> <constants> - <constant name="EULER_ORDER_XYZ" value="0"> - Euler angle composing/decomposing order where X component is first, then Y, then Z. - </constant> - <constant name="EULER_ORDER_XZY" value="1"> - Euler angle composing/decomposing order where X component is first, then Z, then Y. - </constant> - <constant name="EULER_ORDER_YXZ" value="2"> - Euler angle composing/decomposing order where Y component is first, then X, then Z. - </constant> - <constant name="EULER_ORDER_YZX" value="3"> - Euler angle composing/decomposing order where Y component is first, then Z, then X. - </constant> - <constant name="EULER_ORDER_ZXY" value="4"> - Euler angle composing/decomposing order where Z component is first, then X, then Y. - </constant> - <constant name="EULER_ORDER_ZYX" value="5"> - Euler angle composing/decomposing order where Z component is first, then Y, then X. - </constant> <constant name="IDENTITY" value="Basis(1, 0, 0, 0, 1, 0, 0, 0, 1)"> The identity basis, with no rotation or scaling applied. This is identical to calling [code]Basis()[/code] without any parameters. This constant can be used to make your code clearer, and for consistency with C#. diff --git a/doc/classes/BitMap.xml b/doc/classes/BitMap.xml index b3fa55f154..e9774ef485 100644 --- a/doc/classes/BitMap.xml +++ b/doc/classes/BitMap.xml @@ -12,7 +12,7 @@ <method name="convert_to_image" qualifiers="const"> <return type="Image" /> <description> - Returns an image of the same size as the bitmap and with a [enum Image.Format] of type [code]FORMAT_L8[/code]. [code]true[/code] bits of the bitmap are being converted into white pixels, and [code]false[/code] bits into black. + Returns an image of the same size as the bitmap and with a [enum Image.Format] of type [constant Image.FORMAT_L8]. [code]true[/code] bits of the bitmap are being converted into white pixels, and [code]false[/code] bits into black. </description> </method> <method name="create"> diff --git a/doc/classes/Button.xml b/doc/classes/Button.xml index e78cdfc951..d2c9a77486 100644 --- a/doc/classes/Button.xml +++ b/doc/classes/Button.xml @@ -11,7 +11,7 @@ func _ready(): var button = Button.new() button.text = "Click me" - button.connect("pressed", self, "_button_pressed") + button.pressed.connect(self._button_pressed) add_child(button) func _button_pressed(): @@ -22,7 +22,7 @@ { var button = new Button(); button.Text = "Click me"; - button.Connect("pressed", this, nameof(ButtonPressed)); + button.Pressed += ButtonPressed; AddChild(button); } @@ -42,7 +42,7 @@ </tutorials> <members> <member name="alignment" type="int" setter="set_text_alignment" getter="get_text_alignment" enum="HorizontalAlignment" default="1"> - Text alignment policy for the button's text, use one of the [enum @GlobalScope.HorizontalAlignment] constants. + Text alignment policy for the button's text, use one of the [enum HorizontalAlignment] constants. </member> <member name="clip_text" type="bool" setter="set_clip_text" getter="get_clip_text" default="false"> When this property is enabled, text that is too large to fit the button is clipped, when disabled the Button will always be wide enough to hold the text. @@ -58,7 +58,7 @@ To edit margin and spacing of the icon, use [theme_item h_separation] theme property and [code]content_margin_*[/code] properties of the used [StyleBox]es. </member> <member name="icon_alignment" type="int" setter="set_icon_alignment" getter="get_icon_alignment" enum="HorizontalAlignment" default="0"> - Specifies if the icon should be aligned to the left, right, or center of a button. Uses the same [enum @GlobalScope.HorizontalAlignment] constants as the text alignment. If centered, text will draw on top of the icon. + Specifies if the icon should be aligned to the left, right, or center of a button. Uses the same [enum HorizontalAlignment] constants as the text alignment. If centered, text will draw on top of the icon. </member> <member name="language" type="String" setter="set_language" getter="get_language" default=""""> Language code used for line-breaking and text shaping algorithms, if left empty current locale is used instead. diff --git a/doc/classes/Callable.xml b/doc/classes/Callable.xml index dd48ee6790..1fb4f91920 100644 --- a/doc/classes/Callable.xml +++ b/doc/classes/Callable.xml @@ -1,10 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="Callable" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> - An object representing a method in a certain object that can be called. + Built-in type representing a method in an object instance or a standalone function. </brief_description> <description> - [Callable] is a first class object which can be held in variables and passed to functions. It represents a given method in an [Object], and is typically used for signal callbacks. + [Callable] is a built-in [Variant] type that represents a function. It can either be a method within an [Object] instance, or a standalone function not related to any object, like a lambda function. Like all [Variant] types, it can be stored in variables and passed to other functions. It is most commonly used for signal callbacks. [b]Example:[/b] [codeblocks] [gdscript] @@ -32,6 +32,18 @@ } [/csharp] [/codeblocks] + In GDScript, it's possible to create lambda functions within a method. Lambda functions are custom callables that are not associated with an [Object] instance. Optionally, lambda functions can also be named. The name will be displayed in the debugger, or when calling [method get_method]. + [codeblock] + func _init(): + var my_lambda = func (message): + print(message) + + # Prints Hello everyone! + my_lambda.call("Hello everyone!") + + # Prints "Attack!", when the button_pressed signal is emitted. + button_pressed.connect(func(): print("Attack!")) + [/codeblock] </description> <tutorials> </tutorials> @@ -39,7 +51,7 @@ <constructor name="Callable"> <return type="Callable" /> <description> - Constructs a null [Callable] with no object nor method bound. + Constructs an empty [Callable], with no object nor method bound. </description> </constructor> <constructor name="Callable"> @@ -54,7 +66,7 @@ <param index="0" name="object" type="Object" /> <param index="1" name="method" type="StringName" /> <description> - Creates a new [Callable] for the method called [param method] in the specified [param object]. + Creates a new [Callable] for the method named [param method] in the specified [param object]. </description> </constructor> </constructors> @@ -62,7 +74,7 @@ <method name="bind" qualifiers="vararg const"> <return type="Callable" /> <description> - Returns a copy of this [Callable] with the arguments bound. Bound arguments are passed after the arguments supplied by [method call]. + Returns a copy of this [Callable] with one or more arguments bound. When called, the bound arguments are passed [i]after[/i] the arguments supplied by [method call]. </description> </method> <method name="call" qualifiers="vararg const"> @@ -85,13 +97,13 @@ <return type="Variant" /> <param index="0" name="arguments" type="Array" /> <description> - Calls the method represented by this [Callable]. Contrary to [method call], this method does not take a variable number of arguments but expects all arguments to be passed via a single [Array]. + Calls the method represented by this [Callable]. Unlike [method call], this method expects all arguments to be contained inside the [param arguments] [Array]. </description> </method> <method name="get_method" qualifiers="const"> <return type="StringName" /> <description> - Returns the name of the method represented by this [Callable]. + Returns the name of the method represented by this [Callable]. If the callable is a lambda function, returns the function's name. </description> </method> <method name="get_object" qualifiers="const"> @@ -116,7 +128,7 @@ <method name="is_custom" qualifiers="const"> <return type="bool" /> <description> - Returns [code]true[/code] if this [Callable] is a custom callable whose behavior differs based on implementation details. Custom callables are used in the engine for various reasons. If [code]true[/code], you can't use [method get_method]. + Returns [code]true[/code] if this [Callable] is a custom callable. Custom callables are created from [method bind] or [method unbind]. In GDScript, lambda functions are also custom callables. </description> </method> <method name="is_null" qualifiers="const"> @@ -128,33 +140,33 @@ <method name="is_standard" qualifiers="const"> <return type="bool" /> <description> - Returns [code]true[/code] if this [Callable] is a standard callable, referencing an object and a method using a [StringName]. + Returns [code]true[/code] if this [Callable] is a standard callable. This method is the opposite of [method is_custom]. Returns [code]false[/code] if this callable is a lambda function. </description> </method> <method name="is_valid" qualifiers="const"> <return type="bool" /> <description> - Returns [code]true[/code] if the object exists and has a valid function assigned, or is a custom callable. + Returns [code]true[/code] if the callable's object exists and has a valid method name assigned, or is a custom callable. </description> </method> <method name="rpc" qualifiers="vararg const"> <return type="void" /> <description> - Perform an RPC (Remote Procedure Call). This is used for multiplayer and is normally not available unless the function being called has been marked as [i]RPC[/i]. Calling it on unsupported functions will result in an error. + Perform an RPC (Remote Procedure Call). This is used for multiplayer and is normally not available, unless the function being called has been marked as [i]RPC[/i]. Calling this method on unsupported functions will result in an error. </description> </method> <method name="rpc_id" qualifiers="vararg const"> <return type="void" /> <param index="0" name="peer_id" type="int" /> <description> - Perform an RPC (Remote Procedure Call) on a specific peer ID (see multiplayer documentation for reference). This is used for multiplayer and is normally not available unless the function being called has been marked as [i]RPC[/i]. Calling it on unsupported functions will result in an error. + Perform an RPC (Remote Procedure Call) on a specific peer ID (see multiplayer documentation for reference). This is used for multiplayer and is normally not available unless the function being called has been marked as [i]RPC[/i]. Calling this method on unsupported functions will result in an error. </description> </method> <method name="unbind" qualifiers="const"> <return type="Callable" /> <param index="0" name="argcount" type="int" /> <description> - Returns a copy of this [Callable] with the arguments unbound. Calling the returned [Callable] will call the method without the extra arguments that are supplied in the [Callable] on which you are calling this method. + Returns a copy of this [Callable] with the arguments unbound, as defined by [param argcount]. Calling the returned [Callable] will call the method without the extra arguments that are supplied in the [Callable] on which you are calling this method. </description> </method> </methods> diff --git a/doc/classes/CallbackTweener.xml b/doc/classes/CallbackTweener.xml index 6e4ee0380e..626405bc8e 100644 --- a/doc/classes/CallbackTweener.xml +++ b/doc/classes/CallbackTweener.xml @@ -14,7 +14,8 @@ <return type="CallbackTweener" /> <param index="0" name="delay" type="float" /> <description> - Makes the callback call delayed by given time in seconds. Example: + Makes the callback call delayed by given time in seconds. + [b]Example:[/b] [codeblock] var tween = get_tree().create_tween() tween.tween_callback(queue_free).set_delay(2) #this will call queue_free() after 2 seconds diff --git a/doc/classes/CameraAttributes.xml b/doc/classes/CameraAttributes.xml index a741728c14..23dc212069 100644 --- a/doc/classes/CameraAttributes.xml +++ b/doc/classes/CameraAttributes.xml @@ -12,19 +12,19 @@ <tutorials> </tutorials> <members> - <member name="auto_exposure_enabled" type="bool" setter="set_auto_exposure_enabled" getter="is_auto_exposure_enabled"> + <member name="auto_exposure_enabled" type="bool" setter="set_auto_exposure_enabled" getter="is_auto_exposure_enabled" default="false"> If [code]true[/code], enables the tonemapping auto exposure mode of the scene renderer. If [code]true[/code], the renderer will automatically determine the exposure setting to adapt to the scene's illumination and the observed light. </member> - <member name="auto_exposure_scale" type="float" setter="set_auto_exposure_scale" getter="get_auto_exposure_scale"> + <member name="auto_exposure_scale" type="float" setter="set_auto_exposure_scale" getter="get_auto_exposure_scale" default="0.4"> The scale of the auto exposure effect. Affects the intensity of auto exposure. </member> - <member name="auto_exposure_speed" type="float" setter="set_auto_exposure_speed" getter="get_auto_exposure_speed"> + <member name="auto_exposure_speed" type="float" setter="set_auto_exposure_speed" getter="get_auto_exposure_speed" default="0.5"> The speed of the auto exposure effect. Affects the time needed for the camera to perform auto exposure. </member> - <member name="exposure_multiplier" type="float" setter="set_exposure_multiplier" getter="get_exposure_multiplier"> + <member name="exposure_multiplier" type="float" setter="set_exposure_multiplier" getter="get_exposure_multiplier" default="1.0"> Multiplier for the exposure amount. A higher value results in a brighter image. </member> - <member name="exposure_sensitivity" type="float" setter="set_exposure_sensitivity" getter="get_exposure_sensitivity"> + <member name="exposure_sensitivity" type="float" setter="set_exposure_sensitivity" getter="get_exposure_sensitivity" default="100.0"> Sensitivity of camera sensors, measured in ISO. A higher sensitivity results in a brighter image. Only available when [member ProjectSettings.rendering/lights_and_shadows/use_physical_light_units] is enabled. When [member auto_exposure_enabled] this can be used as a method of exposure compensation, doubling the value will increase the exposure value (measured in EV100) by 1 stop. </member> </members> diff --git a/doc/classes/CameraTexture.xml b/doc/classes/CameraTexture.xml index 8eedfe3580..e7020c869e 100644 --- a/doc/classes/CameraTexture.xml +++ b/doc/classes/CameraTexture.xml @@ -16,6 +16,7 @@ <member name="camera_is_active" type="bool" setter="set_camera_active" getter="get_camera_active" default="false"> Convenience property that gives access to the active property of the [CameraFeed]. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="which_feed" type="int" setter="set_which_feed" getter="get_which_feed" enum="CameraServer.FeedImage" default="0"> Which image within the [CameraFeed] we want access to, important if the camera image is split in a Y and CbCr component. </member> diff --git a/doc/classes/CanvasGroup.xml b/doc/classes/CanvasGroup.xml index 3bea8cde21..d2bcf3c7ac 100644 --- a/doc/classes/CanvasGroup.xml +++ b/doc/classes/CanvasGroup.xml @@ -1,8 +1,11 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CanvasGroup" inherits="Node2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Merges several 2D nodes into a single draw operation. </brief_description> <description> + Child [CanvasItem] nodes of a [CanvasGroup] are drawn as a single object. It allows to e.g. draw overlapping translucent 2D nodes without blending (set [member CanvasItem.self_modulate] property of [CanvasGroup] to achieve this effect). + [b]Note:[/b] Since [CanvasGroup] and [member CanvasItem.clip_children] both utilize the backbuffer, children of a [CanvasGroup] who have their [member CanvasItem.clip_children] set to anything other than [constant CanvasItem.CLIP_CHILDREN_DISABLED] will not function correctly. </description> <tutorials> </tutorials> diff --git a/doc/classes/CanvasItem.xml b/doc/classes/CanvasItem.xml index 947e6a3d4c..50bbbc71a0 100644 --- a/doc/classes/CanvasItem.xml +++ b/doc/classes/CanvasItem.xml @@ -114,7 +114,7 @@ <param index="2" name="src_rect" type="Rect2" /> <param index="3" name="modulate" type="Color" default="Color(1, 1, 1, 1)" /> <description> - Draws a textured rectangle region of the font texture with LCD sub-pixel anti-aliasing at a given position, optionally modulated by a color. + Draws a textured rectangle region of the font texture with LCD subpixel anti-aliasing at a given position, optionally modulated by a color. Texture is drawn using the following blend operation, blend mode of the [CanvasItemMaterial] is ignored: [codeblock] dst.r = texture.r * modulate.r * modulate.a + dst.r * (1.0 - texture.r * modulate.a); @@ -416,7 +416,7 @@ <method name="get_global_transform" qualifiers="const"> <return type="Transform2D" /> <description> - Returns the global transform matrix of this item. + Returns the global transform matrix of this item, i.e. the combined transform up to the topmost [CanvasItem] node. The topmost item is a [CanvasItem] that either has no parent, has non-[CanvasItem] parent or it has [member top_level] enabled. </description> </method> <method name="get_global_transform_with_canvas" qualifiers="const"> @@ -456,6 +456,13 @@ Returns this item's transform in relation to the viewport. </description> </method> + <method name="get_visibility_layer_bit" qualifiers="const"> + <return type="bool" /> + <param index="0" name="layer" type="int" /> + <description> + Returns an individual bit on the rendering visibility layer. + </description> + </method> <method name="get_world_2d" qualifiers="const"> <return type="World2D" /> <description> @@ -527,6 +534,14 @@ If [param enable] is [code]true[/code], this node will receive [constant NOTIFICATION_TRANSFORM_CHANGED] when its global transform changes. </description> </method> + <method name="set_visibility_layer_bit"> + <return type="void" /> + <param index="0" name="layer" type="int" /> + <param index="1" name="enabled" type="bool" /> + <description> + Set/clear individual bits on the rendering visibility layer. This simplifies editing this [CanvasItem]'s visibility layer. + </description> + </method> <method name="show"> <return type="void" /> <description> @@ -535,7 +550,7 @@ </method> </methods> <members> - <member name="clip_children" type="bool" setter="set_clip_children" getter="is_clipping_children" default="false"> + <member name="clip_children" type="int" setter="set_clip_children_mode" getter="get_clip_children_mode" enum="CanvasItem.ClipChildrenMode" default="0"> Allows the current node to clip children nodes, essentially acting as a mask. </member> <member name="light_mask" type="int" setter="set_light_mask" getter="get_light_mask" default="1"> @@ -565,6 +580,9 @@ <member name="use_parent_material" type="bool" setter="set_use_parent_material" getter="get_use_parent_material" default="false"> If [code]true[/code], the parent [CanvasItem]'s [member material] property is used as this one's material. </member> + <member name="visibility_layer" type="int" setter="set_visibility_layer" getter="get_visibility_layer" default="1"> + The rendering layer in which this [CanvasItem] is rendered by [Viewport] nodes. A [Viewport] will render a [CanvasItem] if it and all its parents share a layer with the [Viewport]'s canvas cull mask. + </member> <member name="visible" type="bool" setter="set_visible" getter="is_visible" default="true"> If [code]true[/code], this [CanvasItem] is drawn. The node is only visible if all of its antecedents are visible as well (in other words, [method is_visible_in_tree] must return [code]true[/code]). [b]Note:[/b] For controls that inherit [Popup], the correct way to make them visible is to call one of the multiple [code]popup*()[/code] functions instead. @@ -653,5 +671,17 @@ <constant name="TEXTURE_REPEAT_MAX" value="4" enum="TextureRepeat"> Represents the size of the [enum TextureRepeat] enum. </constant> + <constant name="CLIP_CHILDREN_DISABLED" value="0" enum="ClipChildrenMode"> + Child draws over parent and is not clipped. + </constant> + <constant name="CLIP_CHILDREN_ONLY" value="1" enum="ClipChildrenMode"> + Parent is used for the purposes of clipping only. Child is clipped to the parent's visible area, parent is not drawn. + </constant> + <constant name="CLIP_CHILDREN_AND_DRAW" value="2" enum="ClipChildrenMode"> + Parent is used for clipping child, but parent is also drawn underneath child as normal before clipping child to its visible area. + </constant> + <constant name="CLIP_CHILDREN_MAX" value="3" enum="ClipChildrenMode"> + Represents the size of the [enum ClipChildrenMode] enum. + </constant> </constants> </class> diff --git a/doc/classes/CanvasTexture.xml b/doc/classes/CanvasTexture.xml index ac18c2d474..d5bf65835f 100644 --- a/doc/classes/CanvasTexture.xml +++ b/doc/classes/CanvasTexture.xml @@ -1,25 +1,37 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CanvasTexture" inherits="Texture2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Texture with optional normal and specular maps for use in 2D rendering. </brief_description> <description> + [CanvasTexture] is an alternative to [ImageTexture] for 2D rendering. It allows using normal maps and specular maps in any node that inherits from [CanvasItem]. [CanvasTexture] also allows overriding the texture's filter and repeat mode independently of the node's properties (or the project settings). + [b]Note:[/b] [CanvasTexture] cannot be used in 3D rendering. For physically-based materials in 3D, use [BaseMaterial3D] instead. </description> <tutorials> </tutorials> <members> <member name="diffuse_texture" type="Texture2D" setter="set_diffuse_texture" getter="get_diffuse_texture"> + The diffuse (color) texture to use. This is the main texture you want to set in most cases. </member> <member name="normal_texture" type="Texture2D" setter="set_normal_texture" getter="get_normal_texture"> + The normal map texture to use. Only has a visible effect if [Light2D]s are affecting this [CanvasTexture]. + [b]Note:[/b] Godot expects the normal map to use X+, Y+, and Z+ coordinates. See [url=http://wiki.polycount.com/wiki/Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for a comparison of normal map coordinates expected by popular engines. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="specular_color" type="Color" setter="set_specular_color" getter="get_specular_color" default="Color(1, 1, 1, 1)"> + The multiplier for specular reflection colors. The [Light2D]'s color is also taken into account when determining the reflection color. Only has a visible effect if [Light2D]s are affecting this [CanvasTexture]. </member> <member name="specular_shininess" type="float" setter="set_specular_shininess" getter="get_specular_shininess" default="1.0"> + The specular exponent for [Light2D] specular reflections. Higher values result in a more glossy/"wet" look, with reflections becoming more localized and less visible overall. The default value of [code]1.0[/code] disables specular reflections entirely. Only has a visible effect if [Light2D]s are affecting this [CanvasTexture]. </member> <member name="specular_texture" type="Texture2D" setter="set_specular_texture" getter="get_specular_texture"> + The specular map to use for [Light2D] specular reflections. This should be a grayscale or colored texture, with brighter areas resulting in a higher [member specular_shininess] value. Using a colored [member specular_texture] allows controlling specular shininess on a per-channel basis. Only has a visible effect if [Light2D]s are affecting this [CanvasTexture]. </member> <member name="texture_filter" type="int" setter="set_texture_filter" getter="get_texture_filter" enum="CanvasItem.TextureFilter" default="0"> + The texture filtering mode to use when drawing this [CanvasTexture]. </member> <member name="texture_repeat" type="int" setter="set_texture_repeat" getter="get_texture_repeat" enum="CanvasItem.TextureRepeat" default="0"> + The texture repeat mode to use when drawing this [CanvasTexture]. </member> </members> </class> diff --git a/doc/classes/CharacterBody2D.xml b/doc/classes/CharacterBody2D.xml index 2f8e1a7bb8..7395556d05 100644 --- a/doc/classes/CharacterBody2D.xml +++ b/doc/classes/CharacterBody2D.xml @@ -10,7 +10,7 @@ </description> <tutorials> <link title="Kinematic character (2D)">$DOCS_URL/tutorials/physics/kinematic_character_2d.html</link> - <link title="Using KinematicBody2D">$DOCS_URL/tutorials/physics/using_kinematic_body_2d.html</link> + <link title="Using CharacterBody2D">$DOCS_URL/tutorials/physics/using_character_body_2d.html</link> <link title="2D Kinematic Character Demo">https://godotengine.org/asset-library/asset/113</link> <link title="2D Platformer Demo">https://godotengine.org/asset-library/asset/120</link> </tutorials> @@ -152,7 +152,7 @@ </member> <member name="floor_snap_length" type="float" setter="set_floor_snap_length" getter="get_floor_snap_length" default="1.0"> Sets a snapping distance. When set to a value different from [code]0.0[/code], the body is kept attached to slopes when calling [method move_and_slide]. The snapping vector is determined by the given distance along the opposite direction of the [member up_direction]. - As long as the snapping vector is in contact with the ground and the body moves against `up_direction`, the body will remain attached to the surface. Snapping is not applied if the body moves along `up_direction`, so it will be able to detach from the ground when jumping. + As long as the snapping vector is in contact with the ground and the body moves against [member up_direction], the body will remain attached to the surface. Snapping is not applied if the body moves along [member up_direction], so it will be able to detach from the ground when jumping. </member> <member name="floor_stop_on_slope" type="bool" setter="set_floor_stop_on_slope_enabled" getter="is_floor_stop_on_slope_enabled" default="true"> If [code]true[/code], the body will not slide on slopes when calling [method move_and_slide] when the body is standing still. diff --git a/doc/classes/CharacterBody3D.xml b/doc/classes/CharacterBody3D.xml index 6a1975d40f..309e2231a4 100644 --- a/doc/classes/CharacterBody3D.xml +++ b/doc/classes/CharacterBody3D.xml @@ -137,7 +137,7 @@ </member> <member name="floor_snap_length" type="float" setter="set_floor_snap_length" getter="get_floor_snap_length" default="0.1"> Sets a snapping distance. When set to a value different from [code]0.0[/code], the body is kept attached to slopes when calling [method move_and_slide]. The snapping vector is determined by the given distance along the opposite direction of the [member up_direction]. - As long as the snapping vector is in contact with the ground and the body moves against `up_direction`, the body will remain attached to the surface. Snapping is not applied if the body moves along `up_direction`, so it will be able to detach from the ground when jumping. + As long as the snapping vector is in contact with the ground and the body moves against [member up_direction], the body will remain attached to the surface. Snapping is not applied if the body moves along [member up_direction], so it will be able to detach from the ground when jumping. </member> <member name="floor_stop_on_slope" type="bool" setter="set_floor_stop_on_slope_enabled" getter="is_floor_stop_on_slope_enabled" default="true"> If [code]true[/code], the body will not slide on slopes when calling [method move_and_slide] when the body is standing still. diff --git a/doc/classes/CodeEdit.xml b/doc/classes/CodeEdit.xml index ca482a39e0..e7ef5fb289 100644 --- a/doc/classes/CodeEdit.xml +++ b/doc/classes/CodeEdit.xml @@ -4,7 +4,7 @@ Multiline text control intended for editing code. </brief_description> <description> - CodeEdit is a specialised [TextEdit] designed for editing plain text code files. It contains a bunch of features commonly found in code editors such as line numbers, line folding, code completion, indent management and string / comment management. + CodeEdit is a specialized [TextEdit] designed for editing plain text code files. It contains a bunch of features commonly found in code editors such as line numbers, line folding, code completion, indent management and string / comment management. [b]Note:[/b] By default [CodeEdit] always use left-to-right text direction to correctly display source code. </description> <tutorials> @@ -616,8 +616,8 @@ <theme_item name="font_readonly_color" data_type="color" type="Color" default="Color(0.875, 0.875, 0.875, 0.5)"> Sets the font [Color] when [member TextEdit.editable] is disabled. </theme_item> - <theme_item name="font_selected_color" data_type="color" type="Color" default="Color(0, 0, 0, 1)"> - Sets the [Color] of the selected text. [member TextEdit.override_selected_font_color] has to be enabled. + <theme_item name="font_selected_color" data_type="color" type="Color" default="Color(0, 0, 0, 0)"> + Sets the [Color] of the selected text. If equal to [code]Color(0, 0, 0, 0)[/code], it will be ignored. </theme_item> <theme_item name="line_length_guideline_color" data_type="color" type="Color" default="Color(0.3, 0.5, 0.8, 0.1)"> [Color] of the main line length guideline, secondary guidelines will have 50% alpha applied. diff --git a/doc/classes/Color.xml b/doc/classes/Color.xml index a11d7157f1..90fbdcc622 100644 --- a/doc/classes/Color.xml +++ b/doc/classes/Color.xml @@ -141,17 +141,6 @@ [/codeblocks] </description> </method> - <method name="find_named_color" qualifiers="static"> - <return type="int" /> - <param index="0" name="name" type="String" /> - <description> - Returns the index of a named color. Use [method get_named_color] to get the actual color. - [codeblock] - var idx = Color.find_named_color("khaki") - modulate = Color.get_named_color(idx) - [/codeblock] - </description> - </method> <method name="from_hsv" qualifiers="static"> <return type="Color" /> <param index="0" name="h" type="float" /> @@ -208,27 +197,7 @@ <description> Returns the luminance of the color in the [code][0.0, 1.0][/code] range. This is useful when determining light or dark color. Colors with a luminance smaller than 0.5 can be generally considered dark. - [b]Note:[/b] [method get_luminance] relies on the colour being in the linear color space to return an accurate relative luminance value. If the color is in the sRGB color space, use [method srgb_to_linear] to convert it to the linear color space first. - </description> - </method> - <method name="get_named_color" qualifiers="static"> - <return type="Color" /> - <param index="0" name="idx" type="int" /> - <description> - Returns a named color with the given index. You can get the index from [method find_named_color] or iteratively from [method get_named_color_count]. - </description> - </method> - <method name="get_named_color_count" qualifiers="static"> - <return type="int" /> - <description> - Returns the number of available named colors. - </description> - </method> - <method name="get_named_color_name" qualifiers="static"> - <return type="String" /> - <param index="0" name="idx" type="int" /> - <description> - Returns the name of a color with the given index. You can get the index from [method find_named_color] or iteratively from [method get_named_color_count]. + [b]Note:[/b] [method get_luminance] relies on the color being in the linear color space to return an accurate relative luminance value. If the color is in the sRGB color space, use [method srgb_to_linear] to convert it to the linear color space first. </description> </method> <method name="hex" qualifiers="static"> diff --git a/doc/classes/ColorPicker.xml b/doc/classes/ColorPicker.xml index cd1d0b016d..2b287d7546 100644 --- a/doc/classes/ColorPicker.xml +++ b/doc/classes/ColorPicker.xml @@ -55,26 +55,38 @@ </method> </methods> <members> + <member name="can_add_swatches" type="bool" setter="set_can_add_swatches" getter="are_swatches_enabled" default="true"> + If [code]true[/code], it's possible to add presets under Swatches. If [code]false[/code], the button to add presets is disabled. + </member> <member name="color" type="Color" setter="set_pick_color" getter="get_pick_color" default="Color(1, 1, 1, 1)"> The currently selected color. </member> <member name="color_mode" type="int" setter="set_color_mode" getter="get_color_mode" enum="ColorPicker.ColorModeType" default="0"> The currently selected color mode. See [enum ColorModeType]. </member> + <member name="color_modes_visible" type="bool" setter="set_modes_visible" getter="are_modes_visible" default="true"> + If [code]true[/code], the color mode buttons are visible. + </member> <member name="deferred_mode" type="bool" setter="set_deferred_mode" getter="is_deferred_mode" default="false"> If [code]true[/code], the color will apply only after the user releases the mouse button, otherwise it will apply immediately even in mouse motion event (which can cause performance issues). </member> <member name="edit_alpha" type="bool" setter="set_edit_alpha" getter="is_editing_alpha" default="true"> If [code]true[/code], shows an alpha channel slider (opacity). </member> + <member name="hex_visible" type="bool" setter="set_hex_visible" getter="is_hex_visible" default="true"> + If [code]true[/code], the hex color code input field is visible. + </member> <member name="picker_shape" type="int" setter="set_picker_shape" getter="get_picker_shape" enum="ColorPicker.PickerShapeType" default="0"> The shape of the color space view. See [enum PickerShapeType]. </member> - <member name="presets_enabled" type="bool" setter="set_presets_enabled" getter="are_presets_enabled" default="true"> - If [code]true[/code], the "add preset" button is enabled. - </member> <member name="presets_visible" type="bool" setter="set_presets_visible" getter="are_presets_visible" default="true"> - If [code]true[/code], saved color presets are visible. + If [code]true[/code], the Swatches and Recent Colors presets are visible. + </member> + <member name="sampler_visible" type="bool" setter="set_sampler_visible" getter="is_sampler_visible" default="true"> + If [code]true[/code], the color sampler and color preview are visible. + </member> + <member name="sliders_visible" type="bool" setter="set_sliders_visible" getter="are_sliders_visible" default="true"> + If [code]true[/code], the color sliders are visible. </member> <member name="vertical" type="bool" setter="set_vertical" getter="is_vertical" overrides="BoxContainer" default="true" /> </members> @@ -125,6 +137,9 @@ <constant name="SHAPE_OKHSL_CIRCLE" value="3" enum="PickerShapeType"> HSL OK Color Model circle color space. </constant> + <constant name="SHAPE_NONE" value="4" enum="PickerShapeType"> + The color space shape and the shape select button are hidden. Can't be selected from the shapes popup. + </constant> </constants> <theme_items> <theme_item name="h_width" data_type="constant" type="int" default="30"> @@ -151,6 +166,9 @@ <theme_item name="color_hue" data_type="icon" type="Texture2D"> Custom texture for the hue selection slider on the right. </theme_item> + <theme_item name="color_okhsl_hue" data_type="icon" type="Texture2D"> + Custom texture for the H slider in the OKHSL color mode. + </theme_item> <theme_item name="expanded_arrow" data_type="icon" type="Texture2D"> The icon for color preset drop down menu when expanded. </theme_item> diff --git a/doc/classes/CompressedCubemap.xml b/doc/classes/CompressedCubemap.xml index fbb0879fdc..10ee266897 100644 --- a/doc/classes/CompressedCubemap.xml +++ b/doc/classes/CompressedCubemap.xml @@ -1,8 +1,17 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CompressedCubemap" inherits="CompressedTextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + 6-sided texture typically used in 3D rendering, optionally compressed. </brief_description> <description> + A cubemap that is loaded from a [code].ccube[/code] file. This file format is internal to Godot; it is created by importing other image formats with the import system. [CompressedCubemap] can use one of 4 compresson methods: + - Uncompressed (uncompressed on the GPU) + - Lossless (WebP or PNG, uncompressed on the GPU) + - Lossy (WebP, uncompressed on the GPU) + - VRAM Compressed (compressed on the GPU) + Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The [b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required storage on disk, but they will not reduce memory usage on the GPU as the texture is sent to the GPU uncompressed. + Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed textures are faster to load compared to textures using lossless or lossy compression. VRAM compression can exhibit noticeable artifacts and is intended to be used for 3D rendering, not 2D. + See [Cubemap] for a general description of cubemaps. </description> <tutorials> </tutorials> diff --git a/doc/classes/CompressedCubemapArray.xml b/doc/classes/CompressedCubemapArray.xml index ff096cea47..4221241910 100644 --- a/doc/classes/CompressedCubemapArray.xml +++ b/doc/classes/CompressedCubemapArray.xml @@ -1,8 +1,17 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CompressedCubemapArray" inherits="CompressedTextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Array of 6-sided textures typically used in 3D rendering, optionally compressed. </brief_description> <description> + A cubemap array that is loaded from a [code].ccubearray[/code] file. This file format is internal to Godot; it is created by importing other image formats with the import system. [CompressedCubemapArray] can use one of 4 compresson methods: + - Uncompressed (uncompressed on the GPU) + - Lossless (WebP or PNG, uncompressed on the GPU) + - Lossy (WebP, uncompressed on the GPU) + - VRAM Compressed (compressed on the GPU) + Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The [b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required storage on disk, but they will not reduce memory usage on the GPU as the texture is sent to the GPU uncompressed. + Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed textures are faster to load compared to textures using lossless or lossy compression. VRAM compression can exhibit noticeable artifacts and is intended to be used for 3D rendering, not 2D. + See [CubemapArray] for a general description of cubemap arrays. </description> <tutorials> </tutorials> diff --git a/doc/classes/CompressedTexture2D.xml b/doc/classes/CompressedTexture2D.xml index f74265b8d5..660062af7b 100644 --- a/doc/classes/CompressedTexture2D.xml +++ b/doc/classes/CompressedTexture2D.xml @@ -1,10 +1,16 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CompressedTexture2D" inherits="Texture2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> - A [code].ctex[/code] texture. + Texture with 2 dimensions, optionally compressed. </brief_description> <description> - A texture that is loaded from a [code].ctex[/code] file. + A texture that is loaded from a [code].ctex[/code] file. This file format is internal to Godot; it is created by importing other image formats with the import system. [CompressedTexture2D] can use one of 4 compression methods (including a lack of any compression): + - Uncompressed (uncompressed on the GPU) + - Lossless (WebP or PNG, uncompressed on the GPU) + - Lossy (WebP, uncompressed on the GPU) + - VRAM Compressed (compressed on the GPU) + Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The [b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required storage on disk, but they will not reduce memory usage on the GPU as the texture is sent to the GPU uncompressed. + Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed textures are faster to load compared to textures using lossless or lossy compression. VRAM compression can exhibit noticeable artifacts and is intended to be used for 3D rendering, not 2D. </description> <tutorials> </tutorials> @@ -13,13 +19,14 @@ <return type="int" enum="Error" /> <param index="0" name="path" type="String" /> <description> - Loads the texture from the given path. + Loads the texture from the specified [param path]. </description> </method> </methods> <members> <member name="load_path" type="String" setter="load" getter="get_load_path" default=""""> - The CompressedTexture's file path to a [code].ctex[/code] file. + The [CompressedTexture2D]'s file path to a [code].ctex[/code] file. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> </members> </class> diff --git a/doc/classes/CompressedTexture2DArray.xml b/doc/classes/CompressedTexture2DArray.xml index 0c751759af..0bd894a2da 100644 --- a/doc/classes/CompressedTexture2DArray.xml +++ b/doc/classes/CompressedTexture2DArray.xml @@ -1,8 +1,17 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CompressedTexture2DArray" inherits="CompressedTextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Array of 2-dimensional textures, optionally compressed. </brief_description> <description> + A texture array that is loaded from a [code].ctexarray[/code] file. This file format is internal to Godot; it is created by importing other image formats with the import system. [CompressedTexture2DArray] can use one of 4 compresson methods: + - Uncompressed (uncompressed on the GPU) + - Lossless (WebP or PNG, uncompressed on the GPU) + - Lossy (WebP, uncompressed on the GPU) + - VRAM Compressed (compressed on the GPU) + Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The [b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required storage on disk, but they will not reduce memory usage on the GPU as the texture is sent to the GPU uncompressed. + Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed textures are faster to load compared to textures using lossless or lossy compression. VRAM compression can exhibit noticeable artifacts and is intended to be used for 3D rendering, not 2D. + See [Texture2DArray] for a general description of texture arrays. </description> <tutorials> </tutorials> diff --git a/doc/classes/CompressedTexture3D.xml b/doc/classes/CompressedTexture3D.xml index 50bd025861..b11583b684 100644 --- a/doc/classes/CompressedTexture3D.xml +++ b/doc/classes/CompressedTexture3D.xml @@ -1,8 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CompressedTexture3D" inherits="Texture3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Texture with 3 dimensions, optionally compressed. </brief_description> <description> + [CompressedTexture3D] is the VRAM-compressed counterpart of [ImageTexture3D]. The file extension for [CompressedTexture3D] files is [code].ctex3d[/code]. This file format is internal to Godot; it is created by importing other image formats with the import system. + [CompressedTexture3D] uses VRAM compression, which allows to reduce memory usage on the GPU when rendering the texture. This also improves loading times, as VRAM-compressed textures are faster to load compared to textures using lossless compression. VRAM compression can exhibit noticeable artifacts and is intended to be used for 3D rendering, not 2D. + See [Texture3D] for a general description of 3D textures. </description> <tutorials> </tutorials> @@ -11,11 +15,13 @@ <return type="int" enum="Error" /> <param index="0" name="path" type="String" /> <description> + Loads the texture from the specified [param path]. </description> </method> </methods> <members> <member name="load_path" type="String" setter="load" getter="get_load_path" default=""""> + The [CompressedTexture3D]'s file path to a [code].ctex3d[/code] file. </member> </members> </class> diff --git a/doc/classes/CompressedTextureLayered.xml b/doc/classes/CompressedTextureLayered.xml index 547679c0f0..376483ae5c 100644 --- a/doc/classes/CompressedTextureLayered.xml +++ b/doc/classes/CompressedTextureLayered.xml @@ -1,8 +1,16 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="CompressedTextureLayered" inherits="TextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Base class for texture arrays that can optionally be compressed. </brief_description> <description> + A texture array that is loaded from a [code].ctexarray[/code] file. This file format is internal to Godot; it is created by importing other image formats with the import system. [CompressedTexture2D] can use one of 4 compresson methods: + - Uncompressed (uncompressed on the GPU) + - Lossless (WebP or PNG, uncompressed on the GPU) + - Lossy (WebP, uncompressed on the GPU) + - VRAM Compressed (compressed on the GPU) + Only [b]VRAM Compressed[/b] actually reduces the memory usage on the GPU. The [b]Lossless[/b] and [b]Lossy[/b] compression methods will reduce the required storage on disk, but they will not reduce memory usage on the GPU as the texture is sent to the GPU uncompressed. + Using [b]VRAM Compressed[/b] also improves loading times, as VRAM-compressed textures are faster to load compared to textures using lossless or lossy compression. VRAM compression can exhibit noticeable artifacts and is intended to be used for 3D rendering, not 2D. </description> <tutorials> </tutorials> @@ -11,11 +19,13 @@ <return type="int" enum="Error" /> <param index="0" name="path" type="String" /> <description> + Loads the texture at [param path]. </description> </method> </methods> <members> <member name="load_path" type="String" setter="load" getter="get_load_path" default=""""> + The path the texture should be loaded from. </member> </members> </class> diff --git a/doc/classes/ConfigFile.xml b/doc/classes/ConfigFile.xml index 7ba53f852b..4e60df6b96 100644 --- a/doc/classes/ConfigFile.xml +++ b/doc/classes/ConfigFile.xml @@ -163,7 +163,7 @@ <param index="0" name="path" type="String" /> <description> Loads the config file specified as a parameter. The file's contents are parsed and loaded in the [ConfigFile] object which the method was called on. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="load_encrypted"> @@ -172,7 +172,7 @@ <param index="1" name="key" type="PackedByteArray" /> <description> Loads the encrypted config file specified as a parameter, using the provided [param key] to decrypt it. The file's contents are parsed and loaded in the [ConfigFile] object which the method was called on. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="load_encrypted_pass"> @@ -181,7 +181,7 @@ <param index="1" name="password" type="String" /> <description> Loads the encrypted config file specified as a parameter, using the provided [param password] to decrypt it. The file's contents are parsed and loaded in the [ConfigFile] object which the method was called on. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="parse"> @@ -189,7 +189,7 @@ <param index="0" name="data" type="String" /> <description> Parses the passed string as the contents of a config file. The string is parsed and loaded in the ConfigFile object which the method was called on. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="save"> @@ -197,7 +197,7 @@ <param index="0" name="path" type="String" /> <description> Saves the contents of the [ConfigFile] object to the file specified as a parameter. The output file uses an INI-style structure. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="save_encrypted"> @@ -206,7 +206,7 @@ <param index="1" name="key" type="PackedByteArray" /> <description> Saves the contents of the [ConfigFile] object to the AES-256 encrypted file specified as a parameter, using the provided [param key] to encrypt it. The output file uses an INI-style structure. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="save_encrypted_pass"> @@ -215,7 +215,7 @@ <param index="1" name="password" type="String" /> <description> Saves the contents of the [ConfigFile] object to the AES-256 encrypted file specified as a parameter, using the provided [param password] to encrypt it. The output file uses an INI-style structure. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="set_value"> diff --git a/doc/classes/ConfirmationDialog.xml b/doc/classes/ConfirmationDialog.xml index d4c503857d..48b4df9126 100644 --- a/doc/classes/ConfirmationDialog.xml +++ b/doc/classes/ConfirmationDialog.xml @@ -8,10 +8,10 @@ To get cancel action, you can use: [codeblocks] [gdscript] - get_cancel().connect("pressed", self, "cancelled") + get_cancel_button().pressed.connect(self.cancelled) [/gdscript] [csharp] - GetCancel().Connect("pressed", this, nameof(Cancelled)); + GetCancelButton().Pressed += Cancelled; [/csharp] [/codeblocks] </description> diff --git a/doc/classes/Container.xml b/doc/classes/Container.xml index a13e1598b2..0e1ef02573 100644 --- a/doc/classes/Container.xml +++ b/doc/classes/Container.xml @@ -14,14 +14,14 @@ <method name="_get_allowed_size_flags_horizontal" qualifiers="virtual const"> <return type="PackedInt32Array" /> <description> - Implement to return a list of allowed horizontal [enum Control.SizeFlags] for child nodes. This doesn't technically prevent the usages of any other size flags, if your implementation requires that. This only limits the options available to the user in the inspector dock. + Implement to return a list of allowed horizontal [enum Control.SizeFlags] for child nodes. This doesn't technically prevent the usages of any other size flags, if your implementation requires that. This only limits the options available to the user in the Inspector dock. [b]Note:[/b] Having no size flags is equal to having [constant Control.SIZE_SHRINK_BEGIN]. As such, this value is always implicitly allowed. </description> </method> <method name="_get_allowed_size_flags_vertical" qualifiers="virtual const"> <return type="PackedInt32Array" /> <description> - Implement to return a list of allowed vertical [enum Control.SizeFlags] for child nodes. This doesn't technically prevent the usages of any other size flags, if your implementation requires that. This only limits the options available to the user in the inspector dock. + Implement to return a list of allowed vertical [enum Control.SizeFlags] for child nodes. This doesn't technically prevent the usages of any other size flags, if your implementation requires that. This only limits the options available to the user in the Inspector dock. [b]Note:[/b] Having no size flags is equal to having [constant Control.SIZE_SHRINK_BEGIN]. As such, this value is always implicitly allowed. </description> </method> diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index 91e9b65a8a..8a38deeebe 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -12,7 +12,7 @@ Call [method accept_event] so no other node receives the event. Once you accept an input, it becomes handled so [method Node._unhandled_input] will not process it. Only one [Control] node can be in focus. Only the node in focus will receive events. To get the focus, call [method grab_focus]. [Control] nodes lose focus when another node grabs it, or if you hide the node in focus. Sets [member mouse_filter] to [constant MOUSE_FILTER_IGNORE] to tell a [Control] node to ignore mouse or touch events. You'll need it if you place an icon on top of a button. - [Theme] resources change the Control's appearance. If you change the [Theme] on a [Control] node, it affects all of its children. To override some of the theme's parameters, call one of the [code]add_theme_*_override[/code] methods, like [method add_theme_font_override]. You can override the theme with the inspector. + [Theme] resources change the Control's appearance. If you change the [Theme] on a [Control] node, it affects all of its children. To override some of the theme's parameters, call one of the [code]add_theme_*_override[/code] methods, like [method add_theme_font_override]. You can override the theme with the Inspector. [b]Note:[/b] Theme items are [i]not[/i] [Object] properties. This means you can't access their values using [method Object.get] and [method Object.set]. Instead, use the [code]get_theme_*[/code] and [code]add_theme_*_override[/code] methods provided by this class. </description> <tutorials> @@ -110,7 +110,7 @@ <param index="0" name="event" type="InputEvent" /> <description> Virtual method to be implemented by the user. Use this method to process and accept inputs on UI elements. See [method accept_event]. - Example: clicking a control. + [b]Example usage for clicking a control:[/b] [codeblocks] [gdscript] func _gui_input(event): @@ -159,7 +159,7 @@ The returned node will be added as child to a [PopupPanel], so you should only provide the contents of that panel. That [PopupPanel] can be themed using [method Theme.set_stylebox] for the type [code]"TooltipPanel"[/code] (see [member tooltip_text] for an example). [b]Note:[/b] The tooltip is shrunk to minimal size. If you want to ensure it's fully visible, you might want to set its [member custom_minimum_size] to some non-zero value. [b]Note:[/b] The node (and any relevant children) should be [member CanvasItem.visible] when returned, otherwise, the viewport that instantiates it will not be able to calculate its minimum size reliably. - Example of usage with a custom-constructed node: + [b]Example of usage with a custom-constructed node:[/b] [codeblocks] [gdscript] func _make_custom_tooltip(for_text): @@ -176,7 +176,7 @@ } [/csharp] [/codeblocks] - Example of usage with a custom scene instance: + [b]Example of usage with a custom scene instance:[/b] [codeblocks] [gdscript] func _make_custom_tooltip(for_text): @@ -201,7 +201,7 @@ <param index="1" name="text" type="String" /> <description> User defined BiDi algorithm override function. - Returns [code]Array[/code] of [code]Vector2i[/code] text ranges, in the left-to-right order. Ranges should cover full source [param text] without overlaps. BiDi algorithm will be used on each range separately. + Returns an [Array] of [Vector2i] text ranges, in the left-to-right order. Ranges should cover full source [param text] without overlaps. BiDi algorithm will be used on each range separately. </description> </method> <method name="accept_event"> @@ -422,7 +422,7 @@ <description> Returns the position of this [Control] in global screen coordinates (i.e. taking window position into account). Mostly useful for editor plugins. Equals to [member global_position] if the window is embedded (see [member Viewport.gui_embed_subwindows]). - Example usage for showing a popup: + [b]Example usage for showing a popup:[/b] [codeblock] popup_menu.position = get_screen_position() + get_local_mouse_position() popup_menu.reset_size() @@ -528,7 +528,7 @@ <param index="0" name="at_position" type="Vector2" default="Vector2(0, 0)" /> <description> Returns the tooltip text [param at_position] in local coordinates, which will typically appear when the cursor is resting over this control. By default, it returns [member tooltip_text]. - [b]Note:[/b] This method can be overridden to customise its behaviour. If this method returns an empty [String], no tooltip is displayed. + [b]Note:[/b] This method can be overridden to customize its behavior. If this method returns an empty [String], no tooltip is displayed. </description> </method> <method name="grab_click_focus"> @@ -916,7 +916,7 @@ <param index="2" name="margin" type="int" default="0" /> <description> Sets the offsets to a [param preset] from [enum Control.LayoutPreset] enum. This is the code equivalent to using the Layout menu in the 2D editor. - Use parameter [param resize_mode] with constants from [enum Control.LayoutPresetMode] to better determine the resulting size of the [Control]. Constant size will be ignored if used with presets that change size, e.g. [code]PRESET_LEFT_WIDE[/code]. + Use parameter [param resize_mode] with constants from [enum Control.LayoutPresetMode] to better determine the resulting size of the [Control]. Constant size will be ignored if used with presets that change size, e.g. [constant PRESET_LEFT_WIDE]. Use parameter [param margin] to determine the gap between the [Control] and the edges. </description> </method> @@ -979,23 +979,23 @@ The focus access mode for the control (None, Click or All). Only one Control can be focused at the same time, and it will receive keyboard, gamepad, and mouse signals. </member> <member name="focus_neighbor_bottom" type="NodePath" setter="set_focus_neighbor" getter="get_focus_neighbor" default="NodePath("")"> - Tells Godot which node it should give focus to if the user presses the down arrow on the keyboard or down on a gamepad by default. You can change the key by editing the [code]ui_down[/code] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. + Tells Godot which node it should give focus to if the user presses the down arrow on the keyboard or down on a gamepad by default. You can change the key by editing the [member ProjectSettings.input/ui_down] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. </member> <member name="focus_neighbor_left" type="NodePath" setter="set_focus_neighbor" getter="get_focus_neighbor" default="NodePath("")"> - Tells Godot which node it should give focus to if the user presses the left arrow on the keyboard or left on a gamepad by default. You can change the key by editing the [code]ui_left[/code] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the left of this one. + Tells Godot which node it should give focus to if the user presses the left arrow on the keyboard or left on a gamepad by default. You can change the key by editing the [member ProjectSettings.input/ui_left] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the left of this one. </member> <member name="focus_neighbor_right" type="NodePath" setter="set_focus_neighbor" getter="get_focus_neighbor" default="NodePath("")"> - Tells Godot which node it should give focus to if the user presses the right arrow on the keyboard or right on a gamepad by default. You can change the key by editing the [code]ui_right[/code] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. + Tells Godot which node it should give focus to if the user presses the right arrow on the keyboard or right on a gamepad by default. You can change the key by editing the [member ProjectSettings.input/ui_right] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. </member> <member name="focus_neighbor_top" type="NodePath" setter="set_focus_neighbor" getter="get_focus_neighbor" default="NodePath("")"> - Tells Godot which node it should give focus to if the user presses the top arrow on the keyboard or top on a gamepad by default. You can change the key by editing the [code]ui_top[/code] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. + Tells Godot which node it should give focus to if the user presses the top arrow on the keyboard or top on a gamepad by default. You can change the key by editing the [member ProjectSettings.input/ui_up] input action. The node must be a [Control]. If this property is not set, Godot will give focus to the closest [Control] to the bottom of this one. </member> <member name="focus_next" type="NodePath" setter="set_focus_next" getter="get_focus_next" default="NodePath("")"> - Tells Godot which node it should give focus to if the user presses [kbd]Tab[/kbd] on a keyboard by default. You can change the key by editing the [code]ui_focus_next[/code] input action. + Tells Godot which node it should give focus to if the user presses [kbd]Tab[/kbd] on a keyboard by default. You can change the key by editing the [member ProjectSettings.input/ui_focus_next] input action. If this property is not set, Godot will select a "best guess" based on surrounding nodes in the scene tree. </member> <member name="focus_previous" type="NodePath" setter="set_focus_previous" getter="get_focus_previous" default="NodePath("")"> - Tells Godot which node it should give focus to if the user presses [kbd]Shift + Tab[/kbd] on a keyboard by default. You can change the key by editing the [code]ui_focus_prev[/code] input action. + Tells Godot which node it should give focus to if the user presses [kbd]Shift + Tab[/kbd] on a keyboard by default. You can change the key by editing the [member ProjectSettings.input/ui_focus_prev] input action. If this property is not set, Godot will select a "best guess" based on surrounding nodes in the scene tree. </member> <member name="global_position" type="Vector2" setter="_set_global_position" getter="get_global_position"> @@ -1010,6 +1010,10 @@ <member name="layout_direction" type="int" setter="set_layout_direction" getter="get_layout_direction" enum="Control.LayoutDirection" default="0"> Controls layout direction and text writing direction. Right-to-left layouts are necessary for certain languages (e.g. Arabic and Hebrew). </member> + <member name="localize_numeral_system" type="bool" setter="set_localize_numeral_system" getter="is_localizing_numeral_system" default="true"> + If [code]true[/code], automatically converts code line numbers, list indices, [SpinBox] and [ProgressBar] values from the Western Arabic (0..9) to the numeral systems used in current locale. + [b]Note:[/b] Numbers within the text are not automatically converted, it can be done manually, using [method TextServer.format_number]. + </member> <member name="mouse_default_cursor_shape" type="int" setter="set_default_cursor_shape" getter="get_default_cursor_shape" enum="Control.CursorShape" default="0"> The default cursor shape for this control. Useful for Godot plugins and applications or games that use the system's mouse cursors. [b]Note:[/b] On Linux, shapes may vary depending on the cursor theme of the system. @@ -1019,7 +1023,7 @@ </member> <member name="mouse_force_pass_scroll_events" type="bool" setter="set_force_pass_scroll_events" getter="is_force_pass_scroll_events" default="true"> When enabled, scroll wheel events processed by [method _gui_input] will be passed to the parent control even if [member mouse_filter] is set to [constant MOUSE_FILTER_STOP]. As it defaults to true, this allows nested scrollable containers to work out of the box. - You should disable it on the root of your UI if you do not want scroll events to go to the [code]_unhandled_input[/code] processing. + You should disable it on the root of your UI if you do not want scroll events to go to the [method Node._unhandled_input] processing. </member> <member name="offset_bottom" type="float" setter="set_offset" getter="get_offset" default="0.0"> Distance between the node's bottom edge and its parent control, based on [member anchor_bottom]. @@ -1048,7 +1052,7 @@ </member> <member name="scale" type="Vector2" setter="set_scale" getter="get_scale" default="Vector2(1, 1)"> The node's scale, relative to its [member size]. Change this property to scale the node around its [member pivot_offset]. The Control's [member tooltip_text] will also scale according to this value. - [b]Note:[/b] This property is mainly intended to be used for animation purposes. Text inside the Control will look pixelated or blurry when the Control is scaled. To support multiple resolutions in your project, use an appropriate viewport stretch mode as described in the [url=$DOCS_URL/tutorials/viewports/multiple_resolutions.html]documentation[/url] instead of scaling Controls individually. + [b]Note:[/b] This property is mainly intended to be used for animation purposes. Text inside the Control will look pixelated or blurry when the Control is scaled. To support multiple resolutions in your project, use an appropriate viewport stretch mode as described in the [url=$DOCS_URL/tutorials/rendering/multiple_resolutions.html]documentation[/url] instead of scaling Controls individually. [b]Note:[/b] If the Control node is a child of a [Container] node, the scale will be reset to [code]Vector2(1, 1)[/code] when the scene is instantiated. To set the Control's scale when it's instantiated, wait for one frame using [code]await get_tree().process_frame[/code] then set its [member scale] property. </member> <member name="shortcut_context" type="Node" setter="set_shortcut_context" getter="get_shortcut_context"> @@ -1076,7 +1080,7 @@ [b]Note:[/b] Theme items are looked for in the tree order, from branch to root, where each [Control] node is checked for its [member theme] property. The earliest match against any type/class name is returned. The project-level Theme and the default Theme are checked last. </member> <member name="tooltip_text" type="String" setter="set_tooltip_text" getter="get_tooltip_text" default=""""> - The default tooltip text. The tooltip appears when the user's mouse cursor stays idle over this control for a few moments, provided that the [member mouse_filter] property is not [constant MOUSE_FILTER_IGNORE]. The time required for the tooltip to appear can be changed with the [code]gui/timers/tooltip_delay_sec[/code] option in Project Settings. See also [method get_tooltip]. + The default tooltip text. The tooltip appears when the user's mouse cursor stays idle over this control for a few moments, provided that the [member mouse_filter] property is not [constant MOUSE_FILTER_IGNORE]. The time required for the tooltip to appear can be changed with the [member ProjectSettings.gui/timers/tooltip_delay_sec] option. See also [method get_tooltip]. The tooltip popup will use either a default implementation, or a custom one that you can provide by overriding [method _make_custom_tooltip]. The default tooltip includes a [PopupPanel] and [Label] whose theme properties can be customized using [Theme] methods with the [code]"TooltipPanel"[/code] and [code]"TooltipLabel"[/code] respectively. For example: [codeblocks] [gdscript] @@ -1330,7 +1334,7 @@ The control will receive mouse button input events through [method _gui_input] if clicked on. And the control will receive the [signal mouse_entered] and [signal mouse_exited] signals. These events are automatically marked as handled, and they will not propagate further to other controls. This also results in blocking signals in other controls. </constant> <constant name="MOUSE_FILTER_PASS" value="1" enum="MouseFilter"> - The control will receive mouse button input events through [method _gui_input] if clicked on. And the control will receive the [signal mouse_entered] and [signal mouse_exited] signals. If this control does not handle the event, the parent control (if any) will be considered, and so on until there is no more parent control to potentially handle it. This also allows signals to fire in other controls. If no control handled it, the event will be passed to `_unhandled_input` for further processing. + The control will receive mouse button input events through [method _gui_input] if clicked on. And the control will receive the [signal mouse_entered] and [signal mouse_exited] signals. If this control does not handle the event, the parent control (if any) will be considered, and so on until there is no more parent control to potentially handle it. This also allows signals to fire in other controls. If no control handled it, the event will be passed to [method Node._unhandled_input] for further processing. </constant> <constant name="MOUSE_FILTER_IGNORE" value="2" enum="MouseFilter"> The control will not receive mouse button input events through [method _gui_input]. The control will also not receive the [signal mouse_entered] nor [signal mouse_exited] signals. This will not block other controls from receiving these events or firing the signals. Ignored events will not be handled automatically. diff --git a/doc/classes/Cubemap.xml b/doc/classes/Cubemap.xml index 0cdebeda95..46ddede9b1 100644 --- a/doc/classes/Cubemap.xml +++ b/doc/classes/Cubemap.xml @@ -4,8 +4,9 @@ 6-sided texture typically used in 3D rendering. </brief_description> <description> - A cubemap is made of 6 textures organized in layers. They are typically used for faking reflections (see [ReflectionProbe]) in 3D rendering. It can be used to make an object look as if it's reflecting its surroundings. This usually delivers much better performance than other reflection methods. - This resource is typically used as a uniform in custom shaders. Few core Godot methods make use of Cubemap resources. + A cubemap is made of 6 textures organized in layers. They are typically used for faking reflections in 3D rendering (see [ReflectionProbe]). It can be used to make an object look as if it's reflecting its surroundings. This usually delivers much better performance than other reflection methods. + This resource is typically used as a uniform in custom shaders. Few core Godot methods make use of [Cubemap] resources. + To create such a texture file yourself, reimport your image files using the Godot Editor import presets. [b]Note:[/b] Godot doesn't support using cubemaps in a [PanoramaSkyMaterial]. You can use [url=https://danilw.github.io/GLSL-howto/cubemap_to_panorama_js/cubemap_to_panorama.html]this tool[/url] to convert a cubemap to an equirectangular sky map. </description> <tutorials> diff --git a/doc/classes/CubemapArray.xml b/doc/classes/CubemapArray.xml index 07e401a13d..2fd55b66c6 100644 --- a/doc/classes/CubemapArray.xml +++ b/doc/classes/CubemapArray.xml @@ -5,8 +5,9 @@ </brief_description> <description> [CubemapArray]s are made of an array of [Cubemap]s. Accordingly, like [Cubemap]s they are made of multiple textures the amount of which must be divisible by 6 (one image for each face of the cube). The primary benefit of [CubemapArray]s is that they can be accessed in shader code using a single texture reference. In other words, you can pass multiple [Cubemap]s into a shader using a single [CubemapArray]. - Generally, [CubemapArray]s provide a more efficient way for storing multiple [Cubemap]s, than storing multiple [Cubemap]s themselves in an array. - Internally Godot, uses [CubemapArray]s for many effects including the [Sky], if you set [member ProjectSettings.rendering/reflections/sky_reflections/texture_array_reflections] to [code]true[/code]. + Generally, [CubemapArray]s provide a more efficient way for storing multiple [Cubemap]s compared to storing multiple [Cubemap]s themselves in an array. + Internally, Godot uses [CubemapArray]s for many effects including the [Sky], if you set [member ProjectSettings.rendering/reflections/sky_reflections/texture_array_reflections] to [code]true[/code]. + To create such a texture file yourself, reimport your image files using the Godot Editor import presets. [b]Note:[/b] [CubemapArray] is not supported in the OpenGL 3 rendering backend. </description> <tutorials> diff --git a/doc/classes/Curve.xml b/doc/classes/Curve.xml index 20b9dafd0d..d5864f30fa 100644 --- a/doc/classes/Curve.xml +++ b/doc/classes/Curve.xml @@ -30,7 +30,7 @@ <method name="clean_dupes"> <return type="void" /> <description> - Removes points that are closer than [code]CMP_EPSILON[/code] (0.00001) units to their neighbor on the curve. + Removes duplicate points, i.e. points that are less than 0.00001 units (engine epsilon value) away from their neighbor on the curve. </description> </method> <method name="clear_points"> diff --git a/doc/classes/Curve2D.xml b/doc/classes/Curve2D.xml index cc4124d084..ccdf085319 100644 --- a/doc/classes/Curve2D.xml +++ b/doc/classes/Curve2D.xml @@ -102,6 +102,22 @@ Cubic interpolation tends to follow the curves better, but linear is faster (and often, precise enough). </description> </method> + <method name="sample_baked_with_rotation" qualifiers="const"> + <return type="Transform2D" /> + <param index="0" name="offset" type="float" /> + <param index="1" name="cubic" type="bool" default="false" /> + <param index="2" name="loop" type="bool" default="true" /> + <param index="3" name="lookahead" type="float" default="4.0" /> + <description> + Similar to [method sample_baked], but returns [Transform2D] that includes a rotation along the curve. Returns empty transform if length of the curve is [code]0[/code]. + Use [param loop] to smooth the tangent at the end of the curve. [param lookahead] defines the distance to a nearby point for calculating the tangent vector. + [codeblock] + var transform = curve.sample_baked_with_rotation(offset) + position = transform.get_origin() + rotation = transform.get_rotation() + [/codeblock] + </description> + </method> <method name="samplef" qualifiers="const"> <return type="Vector2" /> <param index="0" name="fofs" type="float" /> diff --git a/doc/classes/Curve3D.xml b/doc/classes/Curve3D.xml index 3e4e05f51a..67e4e45e52 100644 --- a/doc/classes/Curve3D.xml +++ b/doc/classes/Curve3D.xml @@ -132,6 +132,15 @@ If the curve has no up vectors, the function sends an error to the console, and returns [code](0, 1, 0)[/code]. </description> </method> + <method name="sample_baked_with_rotation" qualifiers="const"> + <return type="Transform3D" /> + <param index="0" name="offset" type="float" /> + <param index="1" name="cubic" type="bool" default="false" /> + <param index="2" name="apply_tilt" type="bool" default="false" /> + <description> + Similar with [code]interpolate_baked()[/code]. The the return value is [code]Transform3D[/code], with [code]origin[/code] as point position, [code]basis.x[/code] as sideway vector, [code]basis.y[/code] as up vector, [code]basis.z[/code] as forward vector. When the curve length is 0, there is no reasonable way to caculate the rotation, all vectors aligned with global space axes. + </description> + </method> <method name="samplef" qualifiers="const"> <return type="Vector3" /> <param index="0" name="fofs" type="float" /> @@ -183,6 +192,15 @@ [param tolerance_degrees] controls how many degrees the midpoint of a segment may deviate from the real curve, before the segment has to be subdivided. </description> </method> + <method name="tessellate_even_length" qualifiers="const"> + <return type="PackedVector3Array" /> + <param index="0" name="max_stages" type="int" default="5" /> + <param index="1" name="tolerance_length" type="float" default="0.2" /> + <description> + Returns a list of points along the curve, with almost uniform density. [param max_stages] controls how many subdivisions a curve segment may face before it is considered approximate enough. Each subdivision splits the segment in half, so the default 5 stages may mean up to 32 subdivisions per curve segment. Increase with care! + [param tolerance_length] controls the maximal distance between two neighbouring points, before the segment has to be subdivided. + </description> + </method> </methods> <members> <member name="bake_interval" type="float" setter="set_bake_interval" getter="get_bake_interval" default="0.2"> diff --git a/doc/classes/CurveTexture.xml b/doc/classes/CurveTexture.xml index 85473fc237..03e008d738 100644 --- a/doc/classes/CurveTexture.xml +++ b/doc/classes/CurveTexture.xml @@ -13,6 +13,7 @@ <member name="curve" type="Curve" setter="set_curve" getter="get_curve"> The [Curve] that is rendered onto the texture. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="texture_mode" type="int" setter="set_texture_mode" getter="get_texture_mode" enum="CurveTexture.TextureMode" default="0"> The format the texture should be generated with. When passing a CurveTexture as a input to a [Shader], this may need to be adjusted. </member> diff --git a/doc/classes/CurveXYZTexture.xml b/doc/classes/CurveXYZTexture.xml index e3f2e8fc45..8c4e2dce0f 100644 --- a/doc/classes/CurveXYZTexture.xml +++ b/doc/classes/CurveXYZTexture.xml @@ -19,6 +19,7 @@ <member name="curve_z" type="Curve" setter="set_curve_z" getter="get_curve_z"> The [Curve] that is rendered onto the texture's blue channel. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="width" type="int" setter="set_width" getter="get_width" default="256"> The width of the texture (in pixels). Higher values make it possible to represent high-frequency data better (such as sudden direction changes), at the cost of increased generation time and memory usage. </member> diff --git a/doc/classes/Dictionary.xml b/doc/classes/Dictionary.xml index ac1f63af56..9842288d35 100644 --- a/doc/classes/Dictionary.xml +++ b/doc/classes/Dictionary.xml @@ -339,7 +339,7 @@ <return type="Variant" /> <param index="0" name="key" type="Variant" /> <description> - Retunrs a value at the given [param key] or [code]null[/code] and error if the key does not exist. For safe access, use [method get] or [method has]. + Returns a value at the given [param key] or [code]null[/code] and error if the key does not exist. For safe access, use [method get] or [method has]. </description> </operator> </operators> diff --git a/doc/classes/DirAccess.xml b/doc/classes/DirAccess.xml index 7d1612e59c..181d2eb485 100644 --- a/doc/classes/DirAccess.xml +++ b/doc/classes/DirAccess.xml @@ -70,7 +70,7 @@ <param index="0" name="to_dir" type="String" /> <description> Changes the currently opened directory to the one passed as an argument. The argument can be relative to the current directory (e.g. [code]newdir[/code] or [code]../newdir[/code]), or an absolute path (e.g. [code]/tmp/newdir[/code] or [code]res://somedir/newdir[/code]). - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="copy"> @@ -81,7 +81,7 @@ <description> Copies the [param from] file to the [param to] destination. Both arguments should be paths to files, either relative or absolute. If the destination file exists and is not access-protected, it will be overwritten. If [param chmod_flags] is different than [code]-1[/code], the Unix permissions for the destination path will be set to the provided value, if available on the current operating system. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="copy_absolute" qualifiers="static"> @@ -221,7 +221,7 @@ <param index="0" name="path" type="String" /> <description> Creates a directory. The argument can be relative to the current directory, or an absolute path. The target directory should be placed in an already existing directory (to create the full path recursively, see [method make_dir_recursive]). - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="make_dir_absolute" qualifiers="static"> @@ -236,7 +236,7 @@ <param index="0" name="path" type="String" /> <description> Creates a target directory and all necessary intermediate directories in its path, by calling [method make_dir] recursively. The argument can be relative to the current directory, or an absolute path. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="make_dir_recursive_absolute" qualifiers="static"> @@ -260,7 +260,7 @@ <description> Permanently deletes the target file or an empty directory. The argument can be relative to the current directory, or an absolute path. If the target directory is not empty, the operation will fail. If you don't want to delete the file/directory permanently, use [method OS.move_to_trash] instead. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="remove_absolute" qualifiers="static"> @@ -276,7 +276,7 @@ <param index="1" name="to" type="String" /> <description> Renames (move) the [param from] file or directory to the [param to] destination. Both arguments should be paths to files or directories, either relative or absolute. If the destination file or directory exists and is not access-protected, it will be overwritten. - Returns one of the [enum Error] code constants ([code]OK[/code] on success). + Returns one of the [enum Error] code constants ([constant OK] on success). </description> </method> <method name="rename_absolute" qualifiers="static"> diff --git a/doc/classes/DirectionalLight2D.xml b/doc/classes/DirectionalLight2D.xml index a1b8ea86be..7a54980c19 100644 --- a/doc/classes/DirectionalLight2D.xml +++ b/doc/classes/DirectionalLight2D.xml @@ -1,8 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="DirectionalLight2D" inherits="Light2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Directional light from a distance. </brief_description> <description> + A directional light is a type of [Light2D] node that models an infinite number of parallel rays covering the entire scene. It is used for lights with strong intensity that are located far away from the scene (for example: to model sunlight or moonlight). </description> <tutorials> </tutorials> @@ -11,6 +13,7 @@ The height of the light. Used with 2D normal mapping. Ranges from 0 (parallel to the plane) to 1 (perpendicular to the plane). </member> <member name="max_distance" type="float" setter="set_max_distance" getter="get_max_distance" default="10000.0"> + Maximum distance this light covers. Increasing this value will make directional shadows visible from further away, at the cost of lower overall shadow detail and performance (due to more objects being included in shadow rendering). </member> </members> </class> diff --git a/doc/classes/DisplayServer.xml b/doc/classes/DisplayServer.xml index 85d9fd34ca..0039301bf6 100644 --- a/doc/classes/DisplayServer.xml +++ b/doc/classes/DisplayServer.xml @@ -1,8 +1,11 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="DisplayServer" inherits="Object" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Singleton for window management functions. </brief_description> <description> + [DisplayServer] handles everything related to window management. This is separated from [OS] as a single operating system may support multiple display servers. + [b]Headless mode:[/b] Starting the engine with the [code]--headless[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url] disables all rendering and window management functions. Most functions from [DisplayServer] will return dummy values in this case. </description> <tutorials> </tutorials> @@ -16,8 +19,8 @@ <method name="clipboard_get_primary" qualifiers="const"> <return type="String" /> <description> - Returns the user's primary clipboard as a string if possible. - [b]Note:[/b] This method is only implemented on Linux. + Returns the user's [url=https://unix.stackexchange.com/questions/139191/whats-the-difference-between-primary-selection-and-clipboard-buffer]primary[/url] clipboard as a string if possible. This is the clipboard that is set when the user selects text in any application, rather than when pressing [kbd]Ctrl + C[/kbd]. The clipboard data can then be pasted by clicking the middle mouse button in any application that supports the primary clipboard mechanism. + [b]Note:[/b] This method is only implemented on Linux (X11). </description> </method> <method name="clipboard_has" qualifiers="const"> @@ -37,22 +40,14 @@ <return type="void" /> <param index="0" name="clipboard_primary" type="String" /> <description> - Sets the user's primary clipboard content to the given string. - [b]Note:[/b] This method is only implemented on Linux. - </description> - </method> - <method name="create_sub_window"> - <return type="int" /> - <param index="0" name="mode" type="int" enum="DisplayServer.WindowMode" /> - <param index="1" name="vsync_mode" type="int" enum="DisplayServer.VSyncMode" /> - <param index="2" name="flags" type="int" /> - <param index="3" name="rect" type="Rect2i" default="Rect2i(0, 0, 0, 0)" /> - <description> + Sets the user's [url=https://unix.stackexchange.com/questions/139191/whats-the-difference-between-primary-selection-and-clipboard-buffer]primary[/url] clipboard content to the given string. This is the clipboard that is set when the user selects text in any application, rather than when pressing [kbd]Ctrl + C[/kbd]. The clipboard data can then be pasted by clicking the middle mouse button in any application that supports the primary clipboard mechanism. + [b]Note:[/b] This method is only implemented on Linux (X11). </description> </method> <method name="cursor_get_shape" qualifiers="const"> <return type="int" enum="DisplayServer.CursorShape" /> <description> + Returns the default mouse cursor shape set by [method cursor_set_shape]. </description> </method> <method name="cursor_set_custom_image"> @@ -61,18 +56,14 @@ <param index="1" name="shape" type="int" enum="DisplayServer.CursorShape" default="0" /> <param index="2" name="hotspot" type="Vector2" default="Vector2(0, 0)" /> <description> + Sets a custom mouse cursor image for the defined [param shape]. This means the user's operating system and mouse cursor theme will no longer influence the mouse cursor's appearance. The image must be [code]256x256[/code] or smaller for correct appearance. [param hotspot] can optionally be set to define the area where the cursor will click. By default, [param hotspot] is set to [code]Vector2(0, 0)[/code], which is the top-left corner of the image. See also [method cursor_set_shape]. </description> </method> <method name="cursor_set_shape"> <return type="void" /> <param index="0" name="shape" type="int" enum="DisplayServer.CursorShape" /> <description> - </description> - </method> - <method name="delete_sub_window"> - <return type="void" /> - <param index="0" name="window_id" type="int" /> - <description> + Sets the default mouse cursor shape. The cursor's appearance will vary depending on the user's operating system and mouse cursor theme. See also [method cursor_get_shape] and [method cursor_set_custom_image]. </description> </method> <method name="dialog_input_text"> @@ -82,6 +73,8 @@ <param index="2" name="existing_text" type="String" /> <param index="3" name="callback" type="Callable" /> <description> + Shows a text input dialog which uses the operating system's native look-and-feel. [param callback] will be called with a [String] argument equal to the text field's contents when the dialog is closed for any reason. + [b]Note:[/b] This method is implemented on macOS. </description> </method> <method name="dialog_show"> @@ -91,17 +84,23 @@ <param index="2" name="buttons" type="PackedStringArray" /> <param index="3" name="callback" type="Callable" /> <description> + Shows a text dialog which uses the operating system's native look-and-feel. [param callback] will be called when the dialog is closed for any reason. + [b]Note:[/b] This method is implemented on macOS. </description> </method> <method name="enable_for_stealing_focus"> <return type="void" /> <param index="0" name="process_id" type="int" /> <description> + Allows the [param process_id] PID to steal focus from this window. In other words, this disables the operating system's focus stealing protection for the specified PID. + [b]Note:[/b] This method is implemented on Windows. </description> </method> <method name="force_process_and_drop_events"> <return type="void" /> <description> + Forces window manager processing while ignoring all [InputEvent]s. See also [method process_events]. + [b]Note:[/b] This method is implemented on Windows and macOS. </description> </method> <method name="get_accent_color" qualifiers="const"> @@ -127,27 +126,43 @@ <method name="get_name" qualifiers="const"> <return type="String" /> <description> + Returns the name of the [DisplayServer] currently in use. Most operating systems only have a single [DisplayServer], but Linux has access to more than one [DisplayServer] (although only X11 is currently implemented in Godot). + The names of built-in display servers are [code]Windows[/code], [code]macOS[/code], [code]X11[/code] (Linux), [code]Android[/code], [code]iOS[/code], [code]web[/code] (HTML5) and [code]headless[/code] (when started with the [code]--headless[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url]). </description> </method> <method name="get_screen_count" qualifiers="const"> <return type="int" /> <description> + Returns the number of displays available. </description> </method> <method name="get_swap_cancel_ok"> <return type="bool" /> <description> + Returns [code]true[/code] if positions of [b]OK[/b] and [b]Cancel[/b] buttons are swapped in dialogs. This is enabled by default on Windows and UWP to follow interface conventions, and be toggled by changing [member ProjectSettings.gui/common/swap_cancel_ok]. + [b]Note:[/b] This doesn't affect native dialogs such as the ones spawned by [method DisplayServer.dialog_show]. </description> </method> <method name="get_window_at_screen_position" qualifiers="const"> <return type="int" /> <param index="0" name="position" type="Vector2i" /> <description> + Returns the ID of the window at the specified screen [param position] (in pixels). On multi-monitor setups, the screen position is relative to the virtual desktop area. On multi-monitor setups with different screen resolutions or orientations, the origin may be located outside any display like this: + [codeblock] + * (0, 0) +-------+ + | | + +-------------+ | | + | | | | + | | | | + +-------------+ +-------+ + [/codeblock] </description> </method> <method name="get_window_list" qualifiers="const"> <return type="PackedInt32Array" /> <description> + Returns the list of Godot window IDs belonging to this process. + [b]Note:[/b] Native dialogs are not included in this list. </description> </method> <method name="global_menu_add_check_item"> @@ -362,6 +377,14 @@ [b]Note:[/b] This method is implemented on macOS. </description> </method> + <method name="global_menu_get_item_count" qualifiers="const"> + <return type="int" /> + <param index="0" name="menu_root" type="String" /> + <description> + Returns number of items in the global menu with ID [param menu_root]. + [b]Note:[/b] This method is implemented on macOS. + </description> + </method> <method name="global_menu_get_item_icon" qualifiers="const"> <return type="Texture2D" /> <param index="0" name="menu_root" type="String" /> @@ -665,37 +688,42 @@ <return type="bool" /> <param index="0" name="feature" type="int" enum="DisplayServer.Feature" /> <description> + Returns [code]true[/code] if the specified [param feature] is supported by the current [DisplayServer], [code]false[/code] otherwise. </description> </method> <method name="ime_get_selection" qualifiers="const"> <return type="Vector2i" /> <description> + Returns the text selection in the [url=https://en.wikipedia.org/wiki/Input_method]Input Method Editor[/url] composition string, with the [Vector2i]'s [code]x[/code] component being the caret position and [code]y[/code] being the length of the selection. + [b]Note:[/b] This method is implemented on macOS. </description> </method> <method name="ime_get_text" qualifiers="const"> <return type="String" /> <description> + Returns the composition string contained within the [url=https://en.wikipedia.org/wiki/Input_method]Input Method Editor[/url] window. + [b]Note:[/b] This method is implemented on macOS. </description> </method> <method name="is_dark_mode" qualifiers="const"> <return type="bool" /> <description> Returns [code]true[/code] if OS is using dark mode. - [b]Note:[/b] This method is implemented on macOS, Windows and Linux. + [b]Note:[/b] This method is implemented on macOS, Windows and Linux (X11). </description> </method> <method name="is_dark_mode_supported" qualifiers="const"> <return type="bool" /> <description> Returns [code]true[/code] if OS supports dark mode. - [b]Note:[/b] This method is implemented on macOS, Windows and Linux. + [b]Note:[/b] This method is implemented on macOS, Windows and Linux (X11). </description> </method> <method name="keyboard_get_current_layout" qualifiers="const"> <return type="int" /> <description> Returns active keyboard layout index. - [b]Note:[/b] This method is implemented on Linux, macOS and Windows. + [b]Note:[/b] This method is implemented on Linux (X11), macOS and Windows. </description> </method> <method name="keyboard_get_keycode_from_physical" qualifiers="const"> @@ -703,14 +731,14 @@ <param index="0" name="keycode" type="int" enum="Key" /> <description> Converts a physical (US QWERTY) [param keycode] to one in the active keyboard layout. - [b]Note:[/b] This method is implemented on Linux, macOS and Windows. + [b]Note:[/b] This method is implemented on Linux (X11), macOS and Windows. </description> </method> <method name="keyboard_get_layout_count" qualifiers="const"> <return type="int" /> <description> Returns the number of keyboard layouts. - [b]Note:[/b] This method is implemented on Linux, macOS and Windows. + [b]Note:[/b] This method is implemented on Linux (X11), macOS and Windows. </description> </method> <method name="keyboard_get_layout_language" qualifiers="const"> @@ -718,7 +746,7 @@ <param index="0" name="index" type="int" /> <description> Returns the ISO-639/BCP-47 language code of the keyboard layout at position [param index]. - [b]Note:[/b] This method is implemented on Linux, macOS and Windows. + [b]Note:[/b] This method is implemented on Linux (X11), macOS and Windows. </description> </method> <method name="keyboard_get_layout_name" qualifiers="const"> @@ -726,25 +754,27 @@ <param index="0" name="index" type="int" /> <description> Returns the localized name of the keyboard layout at position [param index]. - [b]Note:[/b] This method is implemented on Linux, macOS and Windows. + [b]Note:[/b] This method is implemented on Linux (X11), macOS and Windows. </description> </method> <method name="keyboard_set_current_layout"> <return type="void" /> <param index="0" name="index" type="int" /> <description> - Sets active keyboard layout. - [b]Note:[/b] This method is implemented on Linux, macOS and Windows. + Sets the active keyboard layout. + [b]Note:[/b] This method is implemented on Linux (X11), macOS and Windows. </description> </method> <method name="mouse_get_button_state" qualifiers="const"> <return type="int" enum="MouseButton" /> <description> + Returns the current state of mouse buttons (whether each button is pressed) as a bitmask. If multiple mouse buttons are pressed at the same time, the bits are added together. Equivalent to [method Input.get_mouse_button_mask]. </description> </method> <method name="mouse_get_mode" qualifiers="const"> <return type="int" enum="DisplayServer.MouseMode" /> <description> + Returns the current mouse mode. See also [method mouse_set_mode]. </description> </method> <method name="mouse_get_position" qualifiers="const"> @@ -757,11 +787,13 @@ <return type="void" /> <param index="0" name="mouse_mode" type="int" enum="DisplayServer.MouseMode" /> <description> + Sets the current mouse mode. See also [method mouse_get_mode]. </description> </method> <method name="process_events"> <return type="void" /> <description> + Perform window manager processing, including input flushing. See also [method force_process_and_drop_events], [method Input.flush_buffered_events] and [member Input.use_accumulated_input]. </description> </method> <method name="screen_get_dpi" qualifiers="const"> @@ -779,7 +811,7 @@ xxhdpi - 480 dpi xxxhdpi - 640 dpi [/codeblock] - [b]Note:[/b] This method is implemented on Android, Linux, macOS and Windows. Returns [code]72[/code] on unsupported platforms. + [b]Note:[/b] This method is implemented on Android, Linux (X11), macOS and Windows. Returns [code]72[/code] on unsupported platforms. </description> </method> <method name="screen_get_max_scale" qualifiers="const"> @@ -794,12 +826,24 @@ <return type="int" enum="DisplayServer.ScreenOrientation" /> <param index="0" name="screen" type="int" default="-1" /> <description> + Returns the [param screen]'s current orientation. See also [method screen_set_orientation]. + [b]Note:[/b] This method is implemented on Android and iOS. </description> </method> <method name="screen_get_position" qualifiers="const"> <return type="Vector2i" /> <param index="0" name="screen" type="int" default="-1" /> <description> + Returns the screen's top-left corner position in pixels. On multi-monitor setups, the screen position is relative to the virtual desktop area. On multi-monitor setups with different screen resolutions or orientations, the origin may be located outside any display like this: + [codeblock] + * (0, 0) +-------+ + | | + +-------------+ | | + | | | | + | | | | + +-------------+ +-------+ + [/codeblock] + See also [method screen_get_size]. </description> </method> <method name="screen_get_refresh_rate" qualifiers="const"> @@ -829,29 +873,34 @@ <return type="Vector2i" /> <param index="0" name="screen" type="int" default="-1" /> <description> + Returns the screen's size in pixels. See also [method screen_get_position] and [method screen_get_usable_rect]. </description> </method> <method name="screen_get_usable_rect" qualifiers="const"> <return type="Rect2i" /> <param index="0" name="screen" type="int" default="-1" /> <description> + Returns the portion of the screen that is not obstructed by a status bar in pixels. See also [method screen_get_size]. </description> </method> <method name="screen_is_kept_on" qualifiers="const"> <return type="bool" /> <description> + Returns [code]true[/code] if the screen should never be turned off by the operating system's power-saving measures. See also [method screen_set_keep_on]. </description> </method> <method name="screen_is_touchscreen" qualifiers="const"> <return type="bool" /> <param index="0" name="screen" type="int" default="-1" /> <description> + Returns [code]true[/code] if the screen can send touch events or if [member ProjectSettings.input_devices/pointing/emulate_touch_from_mouse] is [code]true[/code]. </description> </method> <method name="screen_set_keep_on"> <return type="void" /> <param index="0" name="enable" type="bool" /> <description> + Sets whether the screen should never be turned off by the operating system's power-saving measures. See also [method screen_is_kept_on]. </description> </method> <method name="screen_set_orientation"> @@ -859,18 +908,21 @@ <param index="0" name="orientation" type="int" enum="DisplayServer.ScreenOrientation" /> <param index="1" name="screen" type="int" default="-1" /> <description> + Sets the [param screen]'s [param orientation]. See also [method screen_get_orientation]. </description> </method> <method name="set_icon"> <return type="void" /> <param index="0" name="image" type="Image" /> <description> + Sets the window icon (usually displayed in the top-left corner) in the operating system's [i]native[/i] format. To use icons in the operating system's native format, use [method set_native_icon] instead. </description> </method> <method name="set_native_icon"> <return type="void" /> <param index="0" name="filename" type="String" /> <description> + Sets the window icon (usually displayed in the top-left corner) in the operating system's [i]native[/i] format. The file at [param filename] must be in [code].ico[/code] format on Windows or [code].icns[/code] on macOS. By using specially crafted [code].ico[/code] or [code].icns[/code] icons, [method set_native_icon] allows specifying different icons depending on the size the icon is displayed at. This size is determined by the operating system and user preferences (including the display scale factor). To use icons in other formats, use [method set_icon] instead. </description> </method> <method name="tablet_get_current_driver" qualifiers="const"> @@ -911,7 +963,7 @@ - [code]name[/code] is voice name. - [code]id[/code] is voice identifier. - [code]language[/code] is language code in [code]lang_Variant[/code] format. [code]lang[/code] part is a 2 or 3-letter code based on the ISO-639 standard, in lowercase. And [code]Variant[/code] part is an engine dependent string describing country, region or/and dialect. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="tts_get_voices_for_language" qualifiers="const"> @@ -919,35 +971,35 @@ <param index="0" name="language" type="String" /> <description> Returns an [PackedStringArray] of voice identifiers for the [param language]. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="tts_is_paused" qualifiers="const"> <return type="bool" /> <description> Returns [code]true[/code] if the synthesizer is in a paused state. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="tts_is_speaking" qualifiers="const"> <return type="bool" /> <description> Returns [code]true[/code] if the synthesizer is generating speech, or have utterance waiting in the queue. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="tts_pause"> <return type="void" /> <description> Puts the synthesizer into a paused state. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="tts_resume"> <return type="void" /> <description> Resumes the synthesizer if it was paused. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="tts_set_utterance_callback"> @@ -956,10 +1008,10 @@ <param index="1" name="callable" type="Callable" /> <description> Adds a callback, which is called when the utterance has started, finished, canceled or reached a text boundary. - - [code]TTS_UTTERANCE_STARTED[/code], [code]TTS_UTTERANCE_ENDED[/code], and [code]TTS_UTTERANCE_CANCELED[/code] callable's method should take one [int] parameter, the utterance id. - - [code]TTS_UTTERANCE_BOUNDARY[/code] callable's method should take two [int] parameters, the index of the character and the utterance id. + - [constant TTS_UTTERANCE_STARTED], [constant TTS_UTTERANCE_ENDED], and [constant TTS_UTTERANCE_CANCELED] callable's method should take one [int] parameter, the utterance id. + - [constant TTS_UTTERANCE_BOUNDARY] callable's method should take two [int] parameters, the index of the character and the utterance id. [b]Note:[/b] The granularity of the boundary callbacks is engine dependent. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="tts_speak"> @@ -978,16 +1030,16 @@ - [param pitch] ranges from [code]0.0[/code] (lowest) to [code]2.0[/code] (highest), [code]1.0[/code] is default pitch for the current voice. - [param rate] ranges from [code]0.1[/code] (lowest) to [code]10.0[/code] (highest), [code]1.0[/code] is a normal speaking rate. Other values act as a percentage relative. - [param utterance_id] is passed as a parameter to the callback functions. - [b]Note:[/b] On Windows and Linux, utterance [param text] can use SSML markup. SSML support is engine and voice dependent. If the engine does not support SSML, you should strip out all XML markup before calling [method tts_speak]. + [b]Note:[/b] On Windows and Linux (X11), utterance [param text] can use SSML markup. SSML support is engine and voice dependent. If the engine does not support SSML, you should strip out all XML markup before calling [method tts_speak]. [b]Note:[/b] The granularity of pitch, rate, and volume is engine and voice dependent. Values may be truncated. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="tts_stop"> <return type="void" /> <description> Stops synthesis in progress and removes all utterances from the queue. - [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux (X11), macOS, and Windows. </description> </method> <method name="virtual_keyboard_get_height" qualifiers="const"> @@ -1028,17 +1080,11 @@ Sets the mouse cursor position to the given [param position] relative to an origin at the upper left corner of the currently focused game Window Manager window. </description> </method> - <method name="window_attach_instance_id"> - <return type="void" /> - <param index="0" name="instance_id" type="int" /> - <param index="1" name="window_id" type="int" default="0" /> - <description> - </description> - </method> <method name="window_can_draw" qualifiers="const"> <return type="bool" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Returns [code]true[/code] if anything can be drawn in the window specified by [param window_id], [code]false[/code] otherwise. Using the [code]--disable-render-loop[/code] command line argument or a headless build will return [code]false[/code]. </description> </method> <method name="window_get_active_popup" qualifiers="const"> @@ -1051,12 +1097,14 @@ <return type="int" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Returns the [method Object.get_instance_id] of the [Window] the [param window_id] is attached to. also [method window_get_attached_instance_id]. </description> </method> <method name="window_get_current_screen" qualifiers="const"> <return type="int" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Returns the screen the window specified by [param window_id] is currently positioned on. If the screen overlaps multiple displays, the screen where the window's center is located is returned. See also [method window_set_current_screen]. </description> </method> <method name="window_get_flag" qualifiers="const"> @@ -1071,12 +1119,14 @@ <return type="Vector2i" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Returns the window's maximum size (in pixels). See also [method window_set_max_size]. </description> </method> <method name="window_get_min_size" qualifiers="const"> <return type="Vector2i" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Returns the window's minimum size (in pixels). See also [method window_set_min_size]. </description> </method> <method name="window_get_mode" qualifiers="const"> @@ -1092,7 +1142,7 @@ <param index="1" name="window_id" type="int" default="0" /> <description> Returns internal structure pointers for use in plugins. - [b]Note:[/b] This method is implemented on Android, Linux, macOS and Windows. + [b]Note:[/b] This method is implemented on Android, Linux (X11), macOS and Windows. </description> </method> <method name="window_get_popup_safe_rect" qualifiers="const"> @@ -1113,19 +1163,21 @@ <return type="Vector2i" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Returns the size of the window specified by [param window_id] (in pixels), including the borders drawn by the operating system. See also [method window_get_size]. </description> </method> <method name="window_get_safe_title_margins" qualifiers="const"> <return type="Vector3i" /> <param index="0" name="window_id" type="int" default="0" /> <description> - Returns left margins ([code]x[/code]), right margins ([code]y[/code]) adn height ([code]z[/code]) of the title that are safe to use (contains no buttons or other elements) when [constant WINDOW_FLAG_EXTEND_TO_TITLE] flag is set. + Returns left margins ([code]x[/code]), right margins ([code]y[/code]) and height ([code]z[/code]) of the title that are safe to use (contains no buttons or other elements) when [constant WINDOW_FLAG_EXTEND_TO_TITLE] flag is set. </description> </method> <method name="window_get_size" qualifiers="const"> <return type="Vector2i" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Returns the size of the window specified by [param window_id] (in pixels), excluding the borders drawn by the operating system. This is also called the "client area". See also [method window_get_real_size], [method window_set_size] and [method window_get_position]. </description> </method> <method name="window_get_vsync_mode" qualifiers="const"> @@ -1135,6 +1187,13 @@ Returns the V-Sync mode of the given window. </description> </method> + <method name="window_is_maximize_allowed" qualifiers="const"> + <return type="bool" /> + <param index="0" name="window_id" type="int" default="0" /> + <description> + Returns [code]true[/code] if the given window can be maximized (the maximize button is enabled). + </description> + </method> <method name="window_maximize_on_title_dbl_click" qualifiers="const"> <return type="bool" /> <description> @@ -1153,12 +1212,14 @@ <return type="void" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Moves the window specified by [param window_id] to the foreground, so that it is visible over other windows. </description> </method> <method name="window_request_attention"> <return type="void" /> <param index="0" name="window_id" type="int" default="0" /> <description> + Makes the window specified by [param window_id] request attention, which is materialized by the window title and taskbar entry blinking until the window is focused. This usually has no visible effect if the window is currently focused. The exact behavior varies depending on the operating system. </description> </method> <method name="window_set_current_screen"> @@ -1166,6 +1227,7 @@ <param index="0" name="screen" type="int" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Moves the window specified by [param window_id] to the specified [param screen]. See also [method window_get_current_screen]. </description> </method> <method name="window_set_drop_files_callback"> @@ -1173,6 +1235,8 @@ <param index="0" name="callback" type="Callable" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Sets the [param callback] that should be called when files are dropped from the operating system's file manager to the window specified by [param window_id]. + [b]Note:[/b] This method is implemented on Windows, macOS, Linux (X11) and Web. </description> </method> <method name="window_set_exclusive"> @@ -1199,6 +1263,7 @@ <param index="0" name="active" type="bool" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Sets whether [url=https://en.wikipedia.org/wiki/Input_method]Input Method Editor[/url] should be enabled for the window specified by [param window_id]. See also [method window_set_ime_position]. </description> </method> <method name="window_set_ime_position"> @@ -1206,6 +1271,7 @@ <param index="0" name="position" type="Vector2i" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Sets the position of the [url=https://en.wikipedia.org/wiki/Input_method]Input Method Editor[/url] popup for the specified [param window_id]. Only effective if [method window_set_ime_active] was set to [code]true[/code] for the specified [param window_id]. </description> </method> <method name="window_set_input_event_callback"> @@ -1213,6 +1279,7 @@ <param index="0" name="callback" type="Callable" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Sets the [param callback] that should be called when any [InputEvent] is sent to the window specified by [param window_id]. </description> </method> <method name="window_set_input_text_callback"> @@ -1220,6 +1287,7 @@ <param index="0" name="callback" type="Callable" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Sets the [param callback] that should be called when text is entered using the virtual keyboard to the window specified by [param window_id]. </description> </method> <method name="window_set_max_size"> @@ -1227,6 +1295,8 @@ <param index="0" name="max_size" type="Vector2i" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Sets the maximum size of the window specified by [param window_id] in pixels. Normally, the user will not be able to drag the window to make it smaller than the specified size. See also [method window_get_max_size]. + [b]Note:[/b] Using third-party tools, it is possible for users to disable window geometry restrictions and therefore bypass this limit. </description> </method> <method name="window_set_min_size"> @@ -1234,8 +1304,9 @@ <param index="0" name="min_size" type="Vector2i" /> <param index="1" name="window_id" type="int" default="0" /> <description> - Sets the minimum size for the given window to [param min_size] (in pixels). + Sets the minimum size for the given window to [param min_size] (in pixels). Normally, the user will not be able to drag the window to make it larger than the specified size. See also [method window_get_min_size]. [b]Note:[/b] By default, the main window has a minimum size of [code]Vector2i(64, 64)[/code]. This prevents issues that can arise when the window is resized to a near-zero size. + [b]Note:[/b] Using third-party tools, it is possible for users to disable window geometry restrictions and therefore bypass this limit. </description> </method> <method name="window_set_mode"> @@ -1276,8 +1347,8 @@ DisplayServer.WindowSetMousePassthrough(new Vector2[] {}); [/csharp] [/codeblocks] - [b]Note:[/b] On Windows, the portion of a window that lies outside the region is not drawn, while on Linux and macOS it is. - [b]Note:[/b] This method is implemented on Linux, macOS and Windows. + [b]Note:[/b] On Windows, the portion of a window that lies outside the region is not drawn, while on Linux (X11) and macOS it is. + [b]Note:[/b] This method is implemented on Linux (X11), macOS and Windows. </description> </method> <method name="window_set_popup_safe_rect"> @@ -1293,7 +1364,16 @@ <param index="0" name="position" type="Vector2i" /> <param index="1" name="window_id" type="int" default="0" /> <description> - Sets the position of the given window to [param position]. + Sets the position of the given window to [param position]. On multi-monitor setups, the screen position is relative to the virtual desktop area. On multi-monitor setups with different screen resolutions or orientations, the origin may be located outside any display like this: + [codeblock] + * (0, 0) +-------+ + | | + +-------------+ | | + | | | | + | | | | + +-------------+ +-------+ + [/codeblock] + See also [method window_get_position] and [method window_set_size]. </description> </method> <method name="window_set_rect_changed_callback"> @@ -1301,6 +1381,7 @@ <param index="0" name="callback" type="Callable" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Sets the [param callback] that will be called when the window specified by [param window_id] is moved or resized. </description> </method> <method name="window_set_size"> @@ -1308,7 +1389,7 @@ <param index="0" name="size" type="Vector2i" /> <param index="1" name="window_id" type="int" default="0" /> <description> - Sets the size of the given window to [param size]. + Sets the size of the given window to [param size] (in pixels). See also [method window_get_size] and [method window_get_position]. </description> </method> <method name="window_set_title"> @@ -1317,6 +1398,7 @@ <param index="1" name="window_id" type="int" default="0" /> <description> Sets the title of the given window to [param title]. + [b]Note:[/b] Avoid changing the window title every frame, as this can cause performance issues on certain window managers. Try to change the window title only a few times per second at most. </description> </method> <method name="window_set_transient"> @@ -1352,51 +1434,70 @@ <param index="0" name="callback" type="Callable" /> <param index="1" name="window_id" type="int" default="0" /> <description> + Sets the [param callback] that will be called when an event occurs in the window specified by [param window_id]. </description> </method> </methods> <constants> <constant name="FEATURE_GLOBAL_MENU" value="0" enum="Feature"> + Display server supports global menu. This allows the application to display its menu items in the operating system's top bar. [b]macOS[/b] </constant> <constant name="FEATURE_SUBWINDOWS" value="1" enum="Feature"> + Display server supports multiple windows that can be moved outside of the main window. [b]Windows, macOS, Linux (X11)[/b] </constant> <constant name="FEATURE_TOUCHSCREEN" value="2" enum="Feature"> + Display server supports touchscreen input. [b]Windows, Linux (X11), Android, iOS, Web[/b] </constant> <constant name="FEATURE_MOUSE" value="3" enum="Feature"> + Display server supports mouse input. [b]Windows, macOS, Linux (X11), Android, Web[/b] </constant> <constant name="FEATURE_MOUSE_WARP" value="4" enum="Feature"> + Display server supports warping mouse coordinates to keep the mouse cursor constrained within an area, but looping when one of the edges is reached. [b]Windows, macOS, Linux (X11)[/b] </constant> <constant name="FEATURE_CLIPBOARD" value="5" enum="Feature"> + Display server supports setting and getting clipboard data. See also [constant FEATURE_CLIPBOARD_PRIMARY]. [b]Windows, macOS, Linux (X11), Android, iOS, Web[/b] </constant> <constant name="FEATURE_VIRTUAL_KEYBOARD" value="6" enum="Feature"> + Display server supports popping up a virtual keyboard when requested to input text without a physical keyboard. [b]Android, iOS, Web[/b] </constant> <constant name="FEATURE_CURSOR_SHAPE" value="7" enum="Feature"> + Display server supports setting the mouse cursor shape to be different from the default. [b]Windows, macOS, Linux (X11), Android, Web[/b] </constant> <constant name="FEATURE_CUSTOM_CURSOR_SHAPE" value="8" enum="Feature"> + Display server supports setting the mouse cursor shape to a custom image. [b]Windows, macOS, Linux (X11), Web[/b] </constant> <constant name="FEATURE_NATIVE_DIALOG" value="9" enum="Feature"> + Display server supports spawning dialogs using the operating system's native look-and-feel. [b]macOS[/b] </constant> <constant name="FEATURE_IME" value="10" enum="Feature"> + Display server supports [url=https://en.wikipedia.org/wiki/Input_method]Input Method Editor[/url], which is commonly used for inputting Chinese/Japanese/Korean text. This is handled by the operating system, rather than by Godot. [b]Windows, macOS, Linux (X11)[/b] </constant> <constant name="FEATURE_WINDOW_TRANSPARENCY" value="11" enum="Feature"> + Display server supports windows can use per-pixel transparency to make windows behind them partially or fully visible. [b]Windows, macOS, Linux (X11)[/b] </constant> <constant name="FEATURE_HIDPI" value="12" enum="Feature"> + Display server supports querying the operating system's display scale factor. This allows for [i]reliable[/i] automatic hiDPI display detection, as opposed to guessing based on the screen resolution and reported display DPI (which can be unreliable due to broken monitor EDID). [b]Windows, macOS[/b] </constant> <constant name="FEATURE_ICON" value="13" enum="Feature"> + Display server supports changing the window icon (usually displayed in the top-left corner). [b]Windows, macOS, Linux (X11)[/b] </constant> <constant name="FEATURE_NATIVE_ICON" value="14" enum="Feature"> + Display server supports changing the window icon (usually displayed in the top-left corner). [b]Windows, macOS[/b] </constant> <constant name="FEATURE_ORIENTATION" value="15" enum="Feature"> + Display server supports changing the screen orientation. [b]Android, iOS[/b] </constant> <constant name="FEATURE_SWAP_BUFFERS" value="16" enum="Feature"> + Display server supports V-Sync status can be changed from the default (which is forced to be enabled platforms not supporting this feature). [b]Windows, macOS, Linux (X11)[/b] </constant> <constant name="FEATURE_CLIPBOARD_PRIMARY" value="18" enum="Feature"> + Display server supports Primary clipboard can be used. This is a different clipboard from [constant FEATURE_CLIPBOARD]. [b]Linux (X11)[/b] </constant> <constant name="FEATURE_TEXT_TO_SPEECH" value="19" enum="Feature"> - Display server supports text-to-speech. See [code]tts_*[/code] methods. + Display server supports text-to-speech. See [code]tts_*[/code] methods. [b]Windows, macOS, Linux (X11), Android, iOS, Web[/b] </constant> <constant name="FEATURE_EXTEND_TO_TITLE" value="20" enum="Feature"> - Display server supports expanding window content to the title. See [constant WINDOW_FLAG_EXTEND_TO_TITLE]. + Display server supports expanding window content to the title. See [constant WINDOW_FLAG_EXTEND_TO_TITLE]. [b]macOS[/b] </constant> <constant name="MOUSE_MODE_VISIBLE" value="0" enum="MouseMode"> Makes the mouse cursor visible if it is hidden. @@ -1415,24 +1516,34 @@ Confines the mouse cursor to the game window, and make it hidden. </constant> <constant name="SCREEN_OF_MAIN_WINDOW" value="-1"> + Represents the screen where the main window is located. This is usually the default value in functions that allow specifying one of several screens. </constant> <constant name="MAIN_WINDOW_ID" value="0"> + The ID of the main window spawned by the engine, which can be passed to methods expecting a [code]window_id[/code]. </constant> <constant name="INVALID_WINDOW_ID" value="-1"> + The ID that refers to a nonexisting window. This is be returned by some [DisplayServer] methods if no window matches the requested result. </constant> <constant name="SCREEN_LANDSCAPE" value="0" enum="ScreenOrientation"> + Default landscape orientation. </constant> <constant name="SCREEN_PORTRAIT" value="1" enum="ScreenOrientation"> + Default portrait orienstation. </constant> <constant name="SCREEN_REVERSE_LANDSCAPE" value="2" enum="ScreenOrientation"> + Reverse landscape orientation (upside down). </constant> <constant name="SCREEN_REVERSE_PORTRAIT" value="3" enum="ScreenOrientation"> + Reverse portrait orientation (upside down). </constant> <constant name="SCREEN_SENSOR_LANDSCAPE" value="4" enum="ScreenOrientation"> + Automatic landscape orientation (default or reverse depending on sensor). </constant> <constant name="SCREEN_SENSOR_PORTRAIT" value="5" enum="ScreenOrientation"> + Automatic portrait orientation (default or reverse depending on sensor). </constant> <constant name="SCREEN_SENSOR" value="6" enum="ScreenOrientation"> + Automatic landscape or portrait orientation (default or reverse depending on sensor). </constant> <constant name="KEYBOARD_TYPE_DEFAULT" value="0" enum="VirtualKeyboardType"> Default text virtual keyboard. @@ -1460,40 +1571,58 @@ Virtual keyboard with additional keys to assist with typing URLs. </constant> <constant name="CURSOR_ARROW" value="0" enum="CursorShape"> + Arrow cursor shape. This is the default when not pointing anything that overrides the mouse cursor, such as a [LineEdit] or [TextEdit]. </constant> <constant name="CURSOR_IBEAM" value="1" enum="CursorShape"> + I-beam cursor shape. This is used by default when hovering a control that accepts text input, such as [LineEdit] or [TextEdit]. </constant> <constant name="CURSOR_POINTING_HAND" value="2" enum="CursorShape"> + Pointing hand cursor shape. This is used by default when hovering a [LinkButton] or an URL tag in a [RichTextLabel].⋅ </constant> <constant name="CURSOR_CROSS" value="3" enum="CursorShape"> + Crosshair cursor. This is intended to be displayed when the user needs precise aim over an element, such as a rectangle selection tool or a color picker. </constant> <constant name="CURSOR_WAIT" value="4" enum="CursorShape"> + Wait cursor. On most cursor themes, this displays a spinning icon [i]besides[/i] the arrow. Intended to be used for non-blocking operations (when the user can do something else at the moment). See also [constant CURSOR_BUSY]. </constant> <constant name="CURSOR_BUSY" value="5" enum="CursorShape"> + Wait cursor. On most cursor themes, this [i]replaces[/i] the arrow with a spinning icon. Intended to be used for blocking operations (when the user can't do anything else at the moment). See also [constant CURSOR_WAIT]. </constant> <constant name="CURSOR_DRAG" value="6" enum="CursorShape"> + Dragging hand cursor. This is displayed during drag-and-drop operations. See also [constant CURSOR_CAN_DROP]. </constant> <constant name="CURSOR_CAN_DROP" value="7" enum="CursorShape"> + "Can drop" cursor. This is displayed during drag-and-drop operations if hovering over a [Control] that can accept the drag-and-drop event. On most cursor themes, this displays a dragging hand with an arrow symbol besides it. See also [constant CURSOR_DRAG]. </constant> <constant name="CURSOR_FORBIDDEN" value="8" enum="CursorShape"> + Forbidden cursor. This is displayed during drag-and-drop operations if the hovered [Control] can't accept the drag-and-drop event. </constant> <constant name="CURSOR_VSIZE" value="9" enum="CursorShape"> + Vertical resize cursor. Intended to be displayed when the hovered [Control] can be vertically resized using the mouse. See also [constant CURSOR_VSPLIT]. </constant> <constant name="CURSOR_HSIZE" value="10" enum="CursorShape"> + Horizontal resize cursor. Intended to be displayed when the hovered [Control] can be horizontally resized using the mouse. See also [constant CURSOR_HSPLIT]. </constant> <constant name="CURSOR_BDIAGSIZE" value="11" enum="CursorShape"> + Secondary diagonal resize cursor (top-right/bottom-left). Intended to be displayed when the hovered [Control] can be resized on both axes at once using the mouse. </constant> <constant name="CURSOR_FDIAGSIZE" value="12" enum="CursorShape"> + Main diagonal resize cursor (top-left/bottom-right). Intended to be displayed when the hovered [Control] can be resized on both axes at once using the mouse. </constant> <constant name="CURSOR_MOVE" value="13" enum="CursorShape"> + Move cursor. Intended to be displayed when the hovered [Control] can be moved using the mouse. </constant> <constant name="CURSOR_VSPLIT" value="14" enum="CursorShape"> + Vertical split cursor. This is displayed when hovering a [Control] with splits that can be vertically resized using the mouse, such as [VSplitContainer]. On some cursor themes, this cursor may have the same appearance as [constant CURSOR_VSIZE]. </constant> <constant name="CURSOR_HSPLIT" value="15" enum="CursorShape"> + Horizontal split cursor. This is displayed when hovering a [Control] with splits that can be horizontally resized using the mouse, such as [HSplitContainer]. On some cursor themes, this cursor may have the same appearance as [constant CURSOR_HSIZE]. </constant> <constant name="CURSOR_HELP" value="16" enum="CursorShape"> + Help cursor. On most cursor themes, this displays a question mark icon instead of the mouse cursor. Intended to be used when the user has requested help on the next element that will be clicked. </constant> <constant name="CURSOR_MAX" value="17" enum="CursorShape"> + Represents the size of the [enum CursorShape] enum. </constant> <constant name="WINDOW_MODE_WINDOWED" value="0" enum="WindowMode"> Windowed mode, i.e. [Window] doesn't occupy the whole screen (unless set to the size of the screen). @@ -1505,12 +1634,13 @@ Maximized window mode, i.e. [Window] will occupy whole screen area except task bar and still display its borders. Normally happens when the minimize button is pressed. </constant> <constant name="WINDOW_MODE_FULLSCREEN" value="3" enum="WindowMode"> - Full screen window mode. Note that this is not [i]exclusive[/i] full screen. On Windows and Linux, a borderless window is used to emulate full screen. On macOS, a new desktop is used to display the running project. + Full screen window mode. Note that this is not [i]exclusive[/i] full screen. On Windows and Linux (X11), a borderless window is used to emulate full screen. On macOS, a new desktop is used to display the running project. Regardless of the platform, enabling full screen will change the window size to match the monitor's size. Therefore, make sure your project supports [url=$DOCS_URL/tutorials/rendering/multiple_resolutions.html]multiple resolutions[/url] when enabling full screen mode. </constant> <constant name="WINDOW_MODE_EXCLUSIVE_FULLSCREEN" value="4" enum="WindowMode"> - Exclusive full screen window mode. This mode is implemented on Windows only. On other platforms, it is equivalent to [constant WINDOW_MODE_FULLSCREEN]. - Only one window in exclusive full screen mode can be visible on a given screen at a time. If multiple windows are in exclusive full screen mode for the same screen, the last one being set to this mode takes precedence. + Exclusive full screen window mode. This mode is implemented on Windows and macOS only. On other platforms, it is equivalent to [constant WINDOW_MODE_FULLSCREEN]. + [b]On Windows:[/b] Only one window in exclusive full screen mode can be visible on a given screen at a time. If multiple windows are in exclusive full screen mode for the same screen, the last one being set to this mode takes precedence. + [b]On macOS:[/b] Exclusive full-screen mode prevents Dock and Menu from showing up when the mouse pointer is hovering the edge of the screen. Regardless of the platform, enabling full screen will change the window size to match the monitor's size. Therefore, make sure your project supports [url=$DOCS_URL/tutorials/rendering/multiple_resolutions.html]multiple resolutions[/url] when enabling full screen mode. </constant> <constant name="WINDOW_FLAG_RESIZE_DISABLED" value="0" enum="WindowFlags"> @@ -1525,7 +1655,7 @@ <constant name="WINDOW_FLAG_TRANSPARENT" value="3" enum="WindowFlags"> The window background can be transparent. [b]Note:[/b] This flag has no effect if [member ProjectSettings.display/window/per_pixel_transparency/allowed] is set to [code]false[/code]. - [b]Note:[/b] Transparency support is implemented on Linux, macOS and Windows, but availability might vary depending on GPU driver, display manager, and compositor capabilities. + [b]Note:[/b] Transparency support is implemented on Linux (X11), macOS and Windows, but availability might vary depending on GPU driver, display manager, and compositor capabilities. </constant> <constant name="WINDOW_FLAG_NO_FOCUS" value="4" enum="WindowFlags"> The window can't be focused. No-focus window will ignore all input, except mouse clicks. @@ -1570,35 +1700,43 @@ [b]Note:[/b] This flag is implemented on macOS. </constant> <constant name="VSYNC_DISABLED" value="0" enum="VSyncMode"> - No vertical synchronization, which means the engine will display frames as fast as possible (tearing may be visible). + No vertical synchronization, which means the engine will display frames as fast as possible (tearing may be visible). Framerate is unlimited (nonwithstanding [member Engine.max_fps]). </constant> <constant name="VSYNC_ENABLED" value="1" enum="VSyncMode"> - Default vertical synchronization mode, the image is displayed only on vertical blanking intervals (no tearing is visible). + Default vertical synchronization mode, the image is displayed only on vertical blanking intervals (no tearing is visible). Framerate is limited by the monitor refresh rate (nonwithstanding [member Engine.max_fps]). </constant> <constant name="VSYNC_ADAPTIVE" value="2" enum="VSyncMode"> - Behaves like [constant VSYNC_DISABLED] when the framerate drops below the screen's refresh rate to reduce stuttering (tearing may be visible), otherwise vertical synchronization is enabled to avoid tearing. + Behaves like [constant VSYNC_DISABLED] when the framerate drops below the screen's refresh rate to reduce stuttering (tearing may be visible). Otherwise, vertical synchronization is enabled to avoid tearing. Framerate is limited by the monitor refresh rate (nonwithstanding [member Engine.max_fps]). </constant> <constant name="VSYNC_MAILBOX" value="3" enum="VSyncMode"> - Displays the most recent image in the queue on vertical blanking intervals, while rendering to the other images (no tearing is visible). - Although not guaranteed, the images can be rendered as fast as possible, which may reduce input lag. + Displays the most recent image in the queue on vertical blanking intervals, while rendering to the other images (no tearing is visible). Framerate is unlimited (nonwithstanding [member Engine.max_fps]). + Although not guaranteed, the images can be rendered as fast as possible, which may reduce input lag (also called "Fast" V-Sync mode). [constant VSYNC_MAILBOX] works best when at least twice as many frames as the display refresh rate are rendered. </constant> <constant name="DISPLAY_HANDLE" value="0" enum="HandleType"> Display handle: - - Linux: [code]X11::Display*[/code] for the display. + - Linux (X11): [code]X11::Display*[/code] for the display. </constant> <constant name="WINDOW_HANDLE" value="1" enum="HandleType"> Window handle: - Windows: [code]HWND[/code] for the window. - - Linux: [code]X11::Window*[/code] for the window. + - Linux (X11): [code]X11::Window*[/code] for the window. - macOS: [code]NSWindow*[/code] for the window. - iOS: [code]UIViewController*[/code] for the view controller. - Android: [code]jObject[/code] for the activity. </constant> <constant name="WINDOW_VIEW" value="2" enum="HandleType"> Window view: + - Windows: [code]HDC[/code] for the window (only with the GL Compatibility renderer). - macOS: [code]NSView*[/code] for the window main view. - iOS: [code]UIView*[/code] for the window main view. </constant> + <constant name="OPENGL_CONTEXT" value="3" enum="HandleType"> + OpenGL context (only with the GL Compatibility renderer): + - Windows: [code]HGLRC[/code] for the window. + - Linux: [code]GLXContext*[/code] for the window. + - MacOS: [code]NSOpenGLContext*[/code] for the window. + - Android: [code]EGLContext[/code] for the window. + </constant> <constant name="TTS_UTTERANCE_STARTED" value="0" enum="TTSUtteranceEvent"> Utterance has begun to be spoken. </constant> diff --git a/doc/classes/EditorCommandPalette.xml b/doc/classes/EditorCommandPalette.xml index 53a3fe5d19..380c79fc1a 100644 --- a/doc/classes/EditorCommandPalette.xml +++ b/doc/classes/EditorCommandPalette.xml @@ -5,7 +5,7 @@ </brief_description> <description> Object that holds all the available Commands and their shortcuts text. These Commands can be accessed through [b]Editor > Command Palette[/b] menu. - Command key names use slash delimiters to distinguish sections Example: [code]"example/command1"[/code] then [code]example[/code] will be the section name. + Command key names use slash delimiters to distinguish sections, for example: [code]"example/command1"[/code] then [code]example[/code] will be the section name. [codeblocks] [gdscript] var command_palette = get_editor_interface().get_command_palette() diff --git a/doc/classes/EditorDebuggerPlugin.xml b/doc/classes/EditorDebuggerPlugin.xml index c3e0a995c6..10da1edd56 100644 --- a/doc/classes/EditorDebuggerPlugin.xml +++ b/doc/classes/EditorDebuggerPlugin.xml @@ -1,88 +1,88 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="EditorDebuggerPlugin" inherits="Control" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> +<class name="EditorDebuggerPlugin" inherits="RefCounted" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> A base class to implement debugger plugins. </brief_description> <description> [EditorDebuggerPlugin] provides functions related to the editor side of the debugger. - You don't need to instantiate this class; that is automatically handled by the debugger. [Control] nodes can be added as child nodes to provide a GUI for the plugin. - Do not free or reparent this node, otherwise it becomes unusable. - To use [EditorDebuggerPlugin], register it using the [method EditorPlugin.add_debugger_plugin] method first. + To interact with the debugger, an instance of this class must be added to the editor via [method EditorPlugin.add_debugger_plugin]. + Once added, the [method _setup_session] callback will be called for every [EditorDebuggerSession] available to the plugin, and when new ones are created (the sessions may be inactive during this stage). + You can retrieve the available [EditorDebuggerSession]s via [method get_sessions] or get a specific one via [method get_session]. + [codeblocks] + [gdscript] + @tool + extends EditorPlugin + + class ExampleEditorDebugger extends EditorDebuggerPlugin: + + func _has_capture(prefix): + # Return true if you wish to handle message with this prefix. + return prefix == "my_plugin" + + func _capture(message, data, session_id): + if message == "my_plugin:ping": + get_session(session_id).send_message("my_plugin:echo", data) + + func _setup_session(session_id): + # Add a new tab in the debugger session UI containing a label. + var label = Label.new() + label.name = "Example plugin" + label.text = "Example plugin" + var session = get_session(session_id) + # Listens to the session started and stopped signals. + session.started.connect(func (): print("Session started")) + session.stopped.connect(func (): print("Session stopped")) + session.add_session_tab(label) + + var debugger = ExampleEditorDebugger.new() + + func _enter_tree(): + add_debugger_plugin(debugger) + + func _exit_tree(): + remove_debugger_plugin(debugger) + [/gdscript] + [/codeblocks] </description> <tutorials> </tutorials> <methods> - <method name="has_capture"> - <return type="bool" /> - <param index="0" name="name" type="StringName" /> - <description> - Returns [code]true[/code] if a message capture with given name is present otherwise [code]false[/code]. - </description> - </method> - <method name="is_breaked"> - <return type="bool" /> - <description> - Returns [code]true[/code] if the game is in break state otherwise [code]false[/code]. - </description> - </method> - <method name="is_debuggable"> + <method name="_capture" qualifiers="virtual"> <return type="bool" /> + <param index="0" name="message" type="String" /> + <param index="1" name="data" type="Array" /> + <param index="2" name="session_id" type="int" /> <description> - Returns [code]true[/code] if the game can be debugged otherwise [code]false[/code]. + Override this method to process incoming messages. The [param session_id] is the ID of the [EditorDebuggerSession] that received the message (which you can retrieve via [method get_session]). </description> </method> - <method name="is_session_active"> + <method name="_has_capture" qualifiers="virtual const"> <return type="bool" /> + <param index="0" name="capture" type="String" /> <description> - Returns [code]true[/code] if there is an instance of the game running with the attached debugger otherwise [code]false[/code]. + Override this method to enable receiving messages from the debugger. If [param capture] is "my_message" then messages starting with "my_message:" will be passes to the [method _capture] method. </description> </method> - <method name="register_message_capture"> + <method name="_setup_session" qualifiers="virtual"> <return type="void" /> - <param index="0" name="name" type="StringName" /> - <param index="1" name="callable" type="Callable" /> + <param index="0" name="session_id" type="int" /> <description> - Registers a message capture with given [param name]. If [param name] is "my_message" then messages starting with "my_message:" will be called with the given callable. - Callable must accept a message string and a data array as argument. If the message and data are valid then callable must return [code]true[/code] otherwise [code]false[/code]. + Override this method to be notified whenever a new [EditorDebuggerSession] is created (the session may be inactive during this stage). </description> </method> - <method name="send_message"> - <return type="void" /> - <param index="0" name="message" type="String" /> - <param index="1" name="data" type="Array" /> + <method name="get_session"> + <return type="EditorDebuggerSession" /> + <param index="0" name="id" type="int" /> <description> - Sends a message with given [param message] and [param data] array. + Returns the [EditorDebuggerSession] with the given [param id]. </description> </method> - <method name="unregister_message_capture"> - <return type="void" /> - <param index="0" name="name" type="StringName" /> + <method name="get_sessions"> + <return type="Array" /> <description> - Unregisters the message capture with given name. + Returns an array of [EditorDebuggerSession] currently available to this debugger plugin. + Note: Not sessions in the array may be inactive, check their state via [method EditorDebuggerSession.is_active] </description> </method> </methods> - <signals> - <signal name="breaked"> - <param index="0" name="can_debug" type="bool" /> - <description> - Emitted when the game enters a break state. - </description> - </signal> - <signal name="continued"> - <description> - Emitted when the game exists a break state. - </description> - </signal> - <signal name="started"> - <description> - Emitted when the debugging starts. - </description> - </signal> - <signal name="stopped"> - <description> - Emitted when the debugging stops. - </description> - </signal> - </signals> </class> diff --git a/doc/classes/EditorDebuggerSession.xml b/doc/classes/EditorDebuggerSession.xml new file mode 100644 index 0000000000..faf528c143 --- /dev/null +++ b/doc/classes/EditorDebuggerSession.xml @@ -0,0 +1,86 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="EditorDebuggerSession" inherits="RefCounted" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + A class to interact with the editor debugger. + </brief_description> + <description> + This class cannot be directly instantiated and must be retrieved via a [EditorDebuggerPlugin]. + You can add tabs to the session UI via [method add_session_tab], send messages via [method send_message], and toggle [EngineProfiler]s via [method toggle_profiler]. + </description> + <tutorials> + </tutorials> + <methods> + <method name="add_session_tab"> + <return type="void" /> + <param index="0" name="control" type="Control" /> + <description> + Adds the given [param control] to the debug session UI in the debugger bottom panel. + </description> + </method> + <method name="is_active"> + <return type="bool" /> + <description> + Returns [code]true[/code] if the debug session is currently attached to a remote instance. + </description> + </method> + <method name="is_breaked"> + <return type="bool" /> + <description> + Returns [code]true[/code] if the attached remote instance is currently in the debug loop. + </description> + </method> + <method name="is_debuggable"> + <return type="bool" /> + <description> + Returns [code]true[/code] if the attached remote instance can be debugged. + </description> + </method> + <method name="remove_session_tab"> + <return type="void" /> + <param index="0" name="control" type="Control" /> + <description> + Removes the given [param control] from the debug session UI in the debugger bottom panel. + </description> + </method> + <method name="send_message"> + <return type="void" /> + <param index="0" name="message" type="String" /> + <param index="1" name="data" type="Array" default="[]" /> + <description> + Sends the given [param message] to the attached remote instance, optionally passing additionally [param data]. See [EngineDebugger] for how to retrieve those messages. + </description> + </method> + <method name="toggle_profiler"> + <return type="void" /> + <param index="0" name="profiler" type="String" /> + <param index="1" name="enable" type="bool" /> + <param index="2" name="data" type="Array" default="[]" /> + <description> + Toggle the given [param profiler] on the attached remote instance, optionally passing additionally [param data]. See [EngineProfiler] for more details. + </description> + </method> + </methods> + <signals> + <signal name="breaked"> + <param index="0" name="can_debug" type="bool" /> + <description> + Emitted when the attached remote instance enters a break state. If [param can_debug] is [code]true[/code], the remote instance will enter the debug loop. + </description> + </signal> + <signal name="continued"> + <description> + Emitted when the attached remote instance exits a break state. + </description> + </signal> + <signal name="started"> + <description> + Emitted when a remote instance is attached to this session (i.e. the session becomes active). + </description> + </signal> + <signal name="stopped"> + <description> + Emitted when a remote instance is detached from this session (i.e. the session becomes inactive). + </description> + </signal> + </signals> +</class> diff --git a/doc/classes/EditorFeatureProfile.xml b/doc/classes/EditorFeatureProfile.xml index e216059364..27f61f1bd8 100644 --- a/doc/classes/EditorFeatureProfile.xml +++ b/doc/classes/EditorFeatureProfile.xml @@ -28,7 +28,7 @@ <return type="bool" /> <param index="0" name="class_name" type="StringName" /> <description> - Returns [code]true[/code] if editing for the class specified by [param class_name] is disabled. When disabled, the class will still appear in the Create New Node dialog but the inspector will be read-only when selecting a node that extends the class. + Returns [code]true[/code] if editing for the class specified by [param class_name] is disabled. When disabled, the class will still appear in the Create New Node dialog but the Inspector will be read-only when selecting a node that extends the class. </description> </method> <method name="is_class_property_disabled" qualifiers="const"> @@ -36,7 +36,7 @@ <param index="0" name="class_name" type="StringName" /> <param index="1" name="property" type="StringName" /> <description> - Returns [code]true[/code] if [param property] is disabled in the class specified by [param class_name]. When a property is disabled, it won't appear in the inspector when selecting a node that extends the class specified by [param class_name]. + Returns [code]true[/code] if [param property] is disabled in the class specified by [param class_name]. When a property is disabled, it won't appear in the Inspector when selecting a node that extends the class specified by [param class_name]. </description> </method> <method name="is_feature_disabled" qualifiers="const"> @@ -73,7 +73,7 @@ <param index="0" name="class_name" type="StringName" /> <param index="1" name="disable" type="bool" /> <description> - If [param disable] is [code]true[/code], disables editing for the class specified by [param class_name]. When disabled, the class will still appear in the Create New Node dialog but the inspector will be read-only when selecting a node that extends the class. + If [param disable] is [code]true[/code], disables editing for the class specified by [param class_name]. When disabled, the class will still appear in the Create New Node dialog but the Inspector will be read-only when selecting a node that extends the class. </description> </method> <method name="set_disable_class_property"> @@ -82,7 +82,7 @@ <param index="1" name="property" type="StringName" /> <param index="2" name="disable" type="bool" /> <description> - If [param disable] is [code]true[/code], disables editing for [param property] in the class specified by [param class_name]. When a property is disabled, it won't appear in the inspector when selecting a node that extends the class specified by [param class_name]. + If [param disable] is [code]true[/code], disables editing for [param property] in the class specified by [param class_name]. When a property is disabled, it won't appear in the Inspector when selecting a node that extends the class specified by [param class_name]. </description> </method> <method name="set_disable_feature"> @@ -116,7 +116,10 @@ <constant name="FEATURE_IMPORT_DOCK" value="6" enum="Feature"> The Import dock. If this feature is disabled, the Import dock won't be visible. </constant> - <constant name="FEATURE_MAX" value="7" enum="Feature"> + <constant name="FEATURE_HISTORY_DOCK" value="7" enum="Feature"> + The History dock. If this feature is disabled, the History dock won't be visible. + </constant> + <constant name="FEATURE_MAX" value="8" enum="Feature"> Represents the size of the [enum Feature] enum. </constant> </constants> diff --git a/doc/classes/EditorFileDialog.xml b/doc/classes/EditorFileDialog.xml index 51e3706981..29a8f470a1 100644 --- a/doc/classes/EditorFileDialog.xml +++ b/doc/classes/EditorFileDialog.xml @@ -4,7 +4,7 @@ A modified version of [FileDialog] used by the editor. </brief_description> <description> - [EditorFileDialog] is an enhanced version of [FileDialog] avaiable only to editor plugins. Additional features include list of favorited/recent files and ability to see files as thumbnails grid instead of list. + [EditorFileDialog] is an enhanced version of [FileDialog] available only to editor plugins. Additional features include list of favorited/recent files and ability to see files as thumbnails grid instead of list. </description> <tutorials> </tutorials> diff --git a/doc/classes/EditorInspector.xml b/doc/classes/EditorInspector.xml index a1a43dd5bf..ab35a62794 100644 --- a/doc/classes/EditorInspector.xml +++ b/doc/classes/EditorInspector.xml @@ -7,8 +7,8 @@ This is the control that implements property editing in the editor's Settings dialogs, the Inspector dock, etc. To get the [EditorInspector] used in the editor's Inspector dock, use [method EditorInterface.get_inspector]. [EditorInspector] will show properties in the same order as the array returned by [method Object.get_property_list]. If a property's name is path-like (i.e. if it contains forward slashes), [EditorInspector] will create nested sections for "directories" along the path. For example, if a property is named [code]highlighting/gdscript/node_path_color[/code], it will be shown as "Node Path Color" inside the "GDScript" section nested inside the "Highlighting" section. - If a property has [constant @GlobalScope.PROPERTY_USAGE_GROUP] usage, it will group subsequent properties whose name starts with the property's hint string. The group ends when a property does not start with that hint string or when a new group starts. An empty group name effectively ends the current group. [EditorInspector] will create a top-level section for each group. For example, if a property with group usage is named [code]Collide With[/code] and its hint string is [code]collide_with_[/code], a subsequent [code]collide_with_area[/code] property will be shown as "Area" inside the "Collide With" section. - If a property has [constant @GlobalScope.PROPERTY_USAGE_SUBGROUP] usage, a subgroup will be created in the same way as a group, and a second-level section will be created for each subgroup. + If a property has [constant PROPERTY_USAGE_GROUP] usage, it will group subsequent properties whose name starts with the property's hint string. The group ends when a property does not start with that hint string or when a new group starts. An empty group name effectively ends the current group. [EditorInspector] will create a top-level section for each group. For example, if a property with group usage is named [code]Collide With[/code] and its hint string is [code]collide_with_[/code], a subsequent [code]collide_with_area[/code] property will be shown as "Area" inside the "Collide With" section. There is also a special case: when the hint string contains the name of a property, that property is grouped too. This is mainly to help grouping properties like [code]font[/code], [code]font_color[/code] and [code]font_size[/code] (using the hint string [code]font_[/code]). + If a property has [constant PROPERTY_USAGE_SUBGROUP] usage, a subgroup will be created in the same way as a group, and a second-level section will be created for each subgroup. [b]Note:[/b] Unlike sections created from path-like property names, [EditorInspector] won't capitalize the name for sections created from groups. So properties with group usage usually use capitalized names instead of snake_cased names. </description> <tutorials> @@ -33,7 +33,7 @@ <signal name="object_id_selected"> <param index="0" name="id" type="int" /> <description> - Emitted when the Edit button of an [Object] has been pressed in the inspector. This is mainly used in the remote scene tree inspector. + Emitted when the Edit button of an [Object] has been pressed in the inspector. This is mainly used in the remote scene tree Inspector. </description> </signal> <signal name="property_deleted"> diff --git a/doc/classes/EditorInspectorPlugin.xml b/doc/classes/EditorInspectorPlugin.xml index c8a499260e..ba2f7b24bf 100644 --- a/doc/classes/EditorInspectorPlugin.xml +++ b/doc/classes/EditorInspectorPlugin.xml @@ -1,7 +1,7 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="EditorInspectorPlugin" inherits="RefCounted" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> - Plugin for adding custom property editors on inspector. + Plugin for adding custom property editors on the inspector. </brief_description> <description> [EditorInspectorPlugin] allows adding custom property editors to [EditorInspector]. diff --git a/doc/classes/EditorInterface.xml b/doc/classes/EditorInterface.xml index 0beb2459a3..5d4b83bc27 100644 --- a/doc/classes/EditorInterface.xml +++ b/doc/classes/EditorInterface.xml @@ -48,6 +48,12 @@ [b]Warning:[/b] Removing and freeing this node will render a part of the editor useless and may cause a crash. </description> </method> + <method name="get_current_directory" qualifiers="const"> + <return type="String" /> + <description> + Returns the current directory being viewed in the [FileSystemDock]. If a file is selected, its base directory will be returned using [method String.get_base_dir] instead. + </description> + </method> <method name="get_current_path" qualifiers="const"> <return type="String" /> <description> @@ -131,10 +137,10 @@ [b]Warning:[/b] Removing and freeing this node will render a part of the editor useless and may cause a crash. </description> </method> - <method name="get_selected_path" qualifiers="const"> - <return type="String" /> + <method name="get_selected_paths" qualifiers="const"> + <return type="PackedStringArray" /> <description> - Returns the path of the directory currently selected in the [FileSystemDock]. If a file is selected, its base directory will be returned using [method String.get_base_dir] instead. + Returns an array containing the paths of the currently selected files (and directories) in the [FileSystemDock]. </description> </method> <method name="get_selection"> @@ -152,6 +158,12 @@ Shows the given property on the given [param object] in the editor's Inspector dock. If [param inspector_only] is [code]true[/code], plugins will not attempt to edit [param object]. </description> </method> + <method name="is_movie_maker_enabled" qualifiers="const"> + <return type="bool" /> + <description> + Returns [code]true[/code] if Movie Maker mode is enabled in the editor. See also [method set_movie_maker_enabled]. See [MovieWriter] for more information. + </description> + </method> <method name="is_playing_scene" qualifiers="const"> <return type="bool" /> <description> @@ -216,7 +228,7 @@ <method name="save_scene"> <return type="int" enum="Error" /> <description> - Saves the scene. Returns either [code]OK[/code] or [code]ERR_CANT_CREATE[/code] (see [@GlobalScope] constants). + Saves the scene. Returns either [constant OK] or [constant ERR_CANT_CREATE]. </description> </method> <method name="save_scene_as"> @@ -241,6 +253,13 @@ Sets the editor's current main screen to the one specified in [param name]. [param name] must match the text of the tab in question exactly ([code]2D[/code], [code]3D[/code], [code]Script[/code], [code]AssetLib[/code]). </description> </method> + <method name="set_movie_maker_enabled"> + <return type="void" /> + <param index="0" name="enabled" type="bool" /> + <description> + Sets whether Movie Maker mode is enabled in the editor. See also [method is_movie_maker_enabled]. See [MovieWriter] for more information. + </description> + </method> <method name="set_plugin_enabled"> <return type="void" /> <param index="0" name="plugin" type="String" /> diff --git a/doc/classes/EditorNode3DGizmoPlugin.xml b/doc/classes/EditorNode3DGizmoPlugin.xml index 24e1a2da7c..3ab13ec5c0 100644 --- a/doc/classes/EditorNode3DGizmoPlugin.xml +++ b/doc/classes/EditorNode3DGizmoPlugin.xml @@ -8,7 +8,7 @@ To use [EditorNode3DGizmoPlugin], register it using the [method EditorPlugin.add_node_3d_gizmo_plugin] method first. </description> <tutorials> - <link title="Node3D gizmo plugins">$DOCS_URL/tutorials/plugins/editor/spatial_gizmos.html</link> + <link title="Node3D gizmo plugins">$DOCS_URL/tutorials/plugins/editor/3d_gizmos.html</link> </tutorials> <methods> <method name="_can_be_hidden" qualifiers="virtual const"> diff --git a/doc/classes/EditorPlugin.xml b/doc/classes/EditorPlugin.xml index e413c526f4..adcc87d062 100644 --- a/doc/classes/EditorPlugin.xml +++ b/doc/classes/EditorPlugin.xml @@ -100,7 +100,8 @@ <param index="0" name="viewport_camera" type="Camera3D" /> <param index="1" name="event" type="InputEvent" /> <description> - Called when there is a root node in the current edited scene, [method _handles] is implemented, and an [InputEvent] happens in the 3D viewport. The return value decides whether the [InputEvent] is consumed or forwarded to other [EditorPlugin]s. See [enum AfterGUIInput] for options. Example: + Called when there is a root node in the current edited scene, [method _handles] is implemented, and an [InputEvent] happens in the 3D viewport. The return value decides whether the [InputEvent] is consumed or forwarded to other [EditorPlugin]s. See [enum AfterGUIInput] for options. + [b]Example:[/b] [codeblocks] [gdscript] # Prevents the InputEvent from reaching other Editor classes. @@ -115,7 +116,8 @@ } [/csharp] [/codeblocks] - Must [code]return EditorPlugin.AFTER_GUI_INPUT_PASS[/code] in order to forward the [InputEvent] to other Editor classes. Example: + Must [code]return EditorPlugin.AFTER_GUI_INPUT_PASS[/code] in order to forward the [InputEvent] to other Editor classes. + [b]Example:[/b] [codeblocks] [gdscript] # Consumes InputEventMouseMotion and forwards other InputEvent types. @@ -182,7 +184,8 @@ <return type="bool" /> <param index="0" name="event" type="InputEvent" /> <description> - Called when there is a root node in the current edited scene, [method _handles] is implemented and an [InputEvent] happens in the 2D viewport. Intercepts the [InputEvent], if [code]return true[/code] [EditorPlugin] consumes the [param event], otherwise forwards [param event] to other Editor classes. Example: + Called when there is a root node in the current edited scene, [method _handles] is implemented and an [InputEvent] happens in the 2D viewport. Intercepts the [InputEvent], if [code]return true[/code] [EditorPlugin] consumes the [param event], otherwise forwards [param event] to other Editor classes. + [b]Example:[/b] [codeblocks] [gdscript] # Prevents the InputEvent from reaching other Editor classes. @@ -197,7 +200,8 @@ } [/csharp] [/codeblocks] - Must [code]return false[/code] in order to forward the [InputEvent] to other Editor classes. Example: + Must [code]return false[/code] in order to forward the [InputEvent] to other Editor classes. + [b]Example:[/b] [codeblocks] [gdscript] # Consumes InputEventMouseMotion and forwards other InputEvent types. @@ -411,7 +415,7 @@ </method> <method name="add_debugger_plugin"> <return type="void" /> - <param index="0" name="script" type="Script" /> + <param index="0" name="script" type="EditorDebuggerPlugin" /> <description> Adds a [Script] as debugger plugin to the Debugger. The script must extend [EditorDebuggerPlugin]. </description> @@ -595,7 +599,7 @@ </method> <method name="remove_debugger_plugin"> <return type="void" /> - <param index="0" name="script" type="Script" /> + <param index="0" name="script" type="EditorDebuggerPlugin" /> <description> Removes the debugger plugin with given script from the Debugger. </description> @@ -715,44 +719,64 @@ </signals> <constants> <constant name="CONTAINER_TOOLBAR" value="0" enum="CustomControlContainer"> + Main editor toolbar, next to play buttons. </constant> <constant name="CONTAINER_SPATIAL_EDITOR_MENU" value="1" enum="CustomControlContainer"> + The toolbar that appears when 3D editor is active. </constant> <constant name="CONTAINER_SPATIAL_EDITOR_SIDE_LEFT" value="2" enum="CustomControlContainer"> + Left sidebar of the 3D editor. </constant> <constant name="CONTAINER_SPATIAL_EDITOR_SIDE_RIGHT" value="3" enum="CustomControlContainer"> + Right sidebar of the 3D editor. </constant> <constant name="CONTAINER_SPATIAL_EDITOR_BOTTOM" value="4" enum="CustomControlContainer"> + Bottom panel of the 3D editor. </constant> <constant name="CONTAINER_CANVAS_EDITOR_MENU" value="5" enum="CustomControlContainer"> + The toolbar that appears when 2D editor is active. </constant> <constant name="CONTAINER_CANVAS_EDITOR_SIDE_LEFT" value="6" enum="CustomControlContainer"> + Left sidebar of the 2D editor. </constant> <constant name="CONTAINER_CANVAS_EDITOR_SIDE_RIGHT" value="7" enum="CustomControlContainer"> + Right sidebar of the 2D editor. </constant> <constant name="CONTAINER_CANVAS_EDITOR_BOTTOM" value="8" enum="CustomControlContainer"> + Bottom panel of the 2D editor. </constant> <constant name="CONTAINER_INSPECTOR_BOTTOM" value="9" enum="CustomControlContainer"> + Bottom section of the inspector. </constant> <constant name="CONTAINER_PROJECT_SETTING_TAB_LEFT" value="10" enum="CustomControlContainer"> + Tab of Project Settings dialog, to the left of other tabs. </constant> <constant name="CONTAINER_PROJECT_SETTING_TAB_RIGHT" value="11" enum="CustomControlContainer"> + Tab of Project Settings dialog, to the right of other tabs. </constant> <constant name="DOCK_SLOT_LEFT_UL" value="0" enum="DockSlot"> + Dock slot, left side, upper-left (empty in default layout). </constant> <constant name="DOCK_SLOT_LEFT_BL" value="1" enum="DockSlot"> + Dock slot, left side, bottom-left (empty in default layout). </constant> <constant name="DOCK_SLOT_LEFT_UR" value="2" enum="DockSlot"> + Dock slot, left side, upper-right (in default layout includes Scene and Import docks). </constant> <constant name="DOCK_SLOT_LEFT_BR" value="3" enum="DockSlot"> + Dock slot, left side, bottom-right (in default layout includes FileSystem dock). </constant> <constant name="DOCK_SLOT_RIGHT_UL" value="4" enum="DockSlot"> + Dock slot, right side, upper-left (empty in default layout). </constant> <constant name="DOCK_SLOT_RIGHT_BL" value="5" enum="DockSlot"> + Dock slot, right side, bottom-left (empty in default layout). </constant> <constant name="DOCK_SLOT_RIGHT_UR" value="6" enum="DockSlot"> + Dock slot, right side, upper-right (in default layout includes Inspector, Node and History docks). </constant> <constant name="DOCK_SLOT_RIGHT_BR" value="7" enum="DockSlot"> + Dock slot, right side, bottom-right (empty in default layout). </constant> <constant name="DOCK_SLOT_MAX" value="8" enum="DockSlot"> Represents the size of the [enum DockSlot] enum. diff --git a/doc/classes/EditorProperty.xml b/doc/classes/EditorProperty.xml index 2aca19510b..e18bea1f67 100644 --- a/doc/classes/EditorProperty.xml +++ b/doc/classes/EditorProperty.xml @@ -150,7 +150,7 @@ <param index="1" name="pinned" type="bool" /> <description> Emit it if you want to mark (or unmark) the value of a property for being saved regardless of being equal to the default value. - The default value is the one the property will get when the node is just instantiated and can come from an ancestor scene in the inheritance/instancing chain, a script or a builtin class. + The default value is the one the property will get when the node is just instantiated and can come from an ancestor scene in the inheritance/instantiation chain, a script or a builtin class. </description> </signal> <signal name="resource_selected"> diff --git a/doc/classes/EditorSettings.xml b/doc/classes/EditorSettings.xml index 818dda59bc..07457387a0 100644 --- a/doc/classes/EditorSettings.xml +++ b/doc/classes/EditorSettings.xml @@ -196,10 +196,10 @@ The thumbnail size to use in the FileSystem dock (in pixels). See also [member filesystem/file_dialog/thumbnail_size]. </member> <member name="docks/property_editor/auto_refresh_interval" type="float" setter="" getter=""> - The refresh interval to use for the inspector dock's properties. The effect of this setting is mainly noticeable when adjusting gizmos in the 2D/3D editor and looking at the inspector at the same time. Lower values make the inspector more often, but take up more CPU time. + The refresh interval to use for the Inspector dock's properties. The effect of this setting is mainly noticeable when adjusting gizmos in the 2D/3D editor and looking at the inspector at the same time. Lower values make the inspector more often, but take up more CPU time. </member> <member name="docks/property_editor/subresource_hue_tint" type="float" setter="" getter=""> - The tint intensity to use for the subresources background in the inspector dock. The tint is used to distinguish between different subresources in the inspector. Higher values result in a more noticeable background color difference. + The tint intensity to use for the subresources background in the Inspector dock. The tint is used to distinguish between different subresources in the inspector. Higher values result in a more noticeable background color difference. </member> <member name="docks/scene_tree/auto_expand_to_selected" type="bool" setter="" getter=""> If [code]true[/code], the scene tree dock will automatically unfold nodes when a node that has folded parents is selected. @@ -516,7 +516,7 @@ If set to [b]Auto[/b], the font hinting mode will be set to match the current operating system in use. This means the [b]Light[/b] hinting mode will be used on Windows and Linux, and the [b]None[/b] hinting mode will be used on macOS. </member> <member name="interface/editor/font_subpixel_positioning" type="int" setter="" getter=""> - The subpixel positioning mode to use when rendering editor font glyphs. This affects both the main and code fonts. [b]Disabled[/b] is the fastest to render and uses the least memory. [b]Auto[/b] only uses subpixel positioning for small font sizes (where the benefit is the most noticeable). [b]One half of a pixel[/b] and [b]One quarter of a pixel[/b] force the same subpixel positioning mode for all editor fonts, regardless of their size (with [b]One quarter of a pixel[/b] being the highest-quality option). + The subpixel positioning mode to use when rendering editor font glyphs. This affects both the main and code fonts. [b]Disabled[/b] is the fastest to render and uses the least memory. [b]Auto[/b] only uses subpixel positioning for small font sizes (where the benefit is the most noticeable). [b]One Half of a Pixel[/b] and [b]One Quarter of a Pixel[/b] force the same subpixel positioning mode for all editor fonts, regardless of their size (with [b]One Quarter of a Pixel[/b] being the highest-quality option). </member> <member name="interface/editor/low_processor_mode_sleep_usec" type="float" setter="" getter=""> The amount of sleeping between frames when the low-processor usage mode is enabled (in microseconds). Higher values will result in lower CPU/GPU usage, which can improve battery life on laptops. However, higher values will result in a less responsive editor. The default value is set to allow for maximum smoothness on monitors up to 144 Hz. See also [member interface/editor/unfocused_low_processor_mode_sleep_usec]. diff --git a/doc/classes/EditorSpinSlider.xml b/doc/classes/EditorSpinSlider.xml index 9961e11f7d..de105b32e1 100644 --- a/doc/classes/EditorSpinSlider.xml +++ b/doc/classes/EditorSpinSlider.xml @@ -12,6 +12,7 @@ <member name="flat" type="bool" setter="set_flat" getter="is_flat" default="false"> If [code]true[/code], the slider will not draw background. </member> + <member name="focus_mode" type="int" setter="set_focus_mode" getter="get_focus_mode" overrides="Control" enum="Control.FocusMode" default="2" /> <member name="hide_slider" type="bool" setter="set_hide_slider" getter="is_hiding_slider" default="false"> If [code]true[/code], the slider is hidden. </member> @@ -21,6 +22,8 @@ <member name="read_only" type="bool" setter="set_read_only" getter="is_read_only" default="false"> If [code]true[/code], the slider can't be interacted with. </member> + <member name="size_flags_vertical" type="int" setter="set_v_size_flags" getter="get_v_size_flags" overrides="Control" default="1" /> + <member name="step" type="float" setter="set_step" getter="get_step" overrides="Range" default="1.0" /> <member name="suffix" type="String" setter="set_suffix" getter="get_suffix" default=""""> The suffix to display after the value (in a faded color). This should generally be a plural word. You may have to use an abbreviation if the suffix is too long to be displayed. </member> diff --git a/doc/classes/EditorUndoRedoManager.xml b/doc/classes/EditorUndoRedoManager.xml index 1350e4487c..133ee9db0d 100644 --- a/doc/classes/EditorUndoRedoManager.xml +++ b/doc/classes/EditorUndoRedoManager.xml @@ -107,6 +107,18 @@ </description> </method> </methods> + <signals> + <signal name="history_changed"> + <description> + Emitted when the list of actions in any history has changed, either when an action is committed or a history is cleared. + </description> + </signal> + <signal name="version_changed"> + <description> + Emitted when the version of any history has changed as a result of undo or redo call. + </description> + </signal> + </signals> <constants> <constant name="GLOBAL_HISTORY" value="0" enum="SpecialHistory"> Global history not associated with any scene, but with external resources etc. diff --git a/doc/classes/Engine.xml b/doc/classes/Engine.xml index 821fae37a6..d583e07f59 100644 --- a/doc/classes/Engine.xml +++ b/doc/classes/Engine.xml @@ -275,13 +275,16 @@ If [member ProjectSettings.display/window/vsync/vsync_mode] is [code]Disabled[/code], limiting the FPS to a high value that can be consistently reached on the system can reduce input lag compared to an uncapped framerate. Since this works by ensuring the GPU load is lower than 100%, this latency reduction is only effective in GPU-bottlenecked scenarios, not CPU-bottlenecked scenarios. See also [member physics_ticks_per_second] and [member ProjectSettings.application/run/max_fps]. </member> + <member name="max_physics_steps_per_frame" type="int" setter="set_max_physics_steps_per_frame" getter="get_max_physics_steps_per_frame" default="8"> + Controls the maximum number of physics steps that can be simulated each rendered frame. The default value is tuned to avoid "spiral of death" situations where expensive physics simulations trigger more expensive simulations indefinitely. However, the game will appear to slow down if the rendering FPS is less than [code]1 / max_physics_steps_per_frame[/code] of [member physics_ticks_per_second]. This occurs even if [code]delta[/code] is consistently used in physics calculations. To avoid this, increase [member max_physics_steps_per_frame] if you have increased [member physics_ticks_per_second] significantly above its default value. + </member> <member name="physics_jitter_fix" type="float" setter="set_physics_jitter_fix" getter="get_physics_jitter_fix" default="0.5"> Controls how much physics ticks are synchronized with real time. For 0 or less, the ticks are synchronized. Such values are recommended for network games, where clock synchronization matters. Higher values cause higher deviation of the in-game clock and real clock but smooth out framerate jitters. The default value of 0.5 should be fine for most; values above 2 could cause the game to react to dropped frames with a noticeable delay and are not recommended. [b]Note:[/b] For best results, when using a custom physics interpolation solution, the physics jitter fix should be disabled by setting [member physics_jitter_fix] to [code]0[/code]. </member> <member name="physics_ticks_per_second" type="int" setter="set_physics_ticks_per_second" getter="get_physics_ticks_per_second" default="60"> The number of fixed iterations per second. This controls how often physics simulation and [method Node._physics_process] methods are run. This value should generally always be set to [code]60[/code] or above, as Godot doesn't interpolate the physics step. As a result, values lower than [code]60[/code] will look stuttery. This value can be increased to make input more reactive or work around collision tunneling issues, but keep in mind doing so will increase CPU usage. See also [member max_fps] and [member ProjectSettings.physics/common/physics_ticks_per_second]. - [b]Note:[/b] Only 8 physics ticks may be simulated per rendered frame at most. If more than 8 physics ticks have to be simulated per rendered frame to keep up with rendering, the game will appear to slow down (even if [code]delta[/code] is used consistently in physics calculations). Therefore, it is recommended not to increase [member physics_ticks_per_second] above 240. Otherwise, the game will slow down when the rendering framerate goes below 30 FPS. + [b]Note:[/b] Only [member max_physics_steps_per_frame] physics ticks may be simulated per rendered frame at most. If more physics ticks have to be simulated per rendered frame to keep up with rendering, the project will appear to slow down (even if [code]delta[/code] is used consistently in physics calculations). Therefore, it is recommended to also increase [member max_physics_steps_per_frame] if increasing [member physics_ticks_per_second] significantly above its default value. </member> <member name="print_error_messages" type="bool" setter="set_print_error_messages" getter="is_printing_error_messages" default="true"> If [code]false[/code], stops printing error and warning messages to the console and editor Output log. This can be used to hide error and warning messages during unit test suite runs. This property is equivalent to the [member ProjectSettings.application/run/disable_stderr] project setting. diff --git a/doc/classes/Expression.xml b/doc/classes/Expression.xml index 3a397f56a9..4670e0c382 100644 --- a/doc/classes/Expression.xml +++ b/doc/classes/Expression.xml @@ -12,7 +12,7 @@ var expression = Expression.new() func _ready(): - $LineEdit.connect("text_submitted", self, "_on_text_submitted") + $LineEdit.text_submitted.connect(self._on_text_submitted) func _on_text_submitted(command): var error = expression.parse(command) @@ -28,7 +28,7 @@ public override void _Ready() { - GetNode("LineEdit").Connect("text_submitted", this, nameof(OnTextEntered)); + GetNode("LineEdit").TextSubmitted += OnTextEntered; } private void OnTextEntered(string command) diff --git a/doc/classes/FileSystemDock.xml b/doc/classes/FileSystemDock.xml index 5578f449b3..00f5c7ddff 100644 --- a/doc/classes/FileSystemDock.xml +++ b/doc/classes/FileSystemDock.xml @@ -46,7 +46,7 @@ <description> </description> </signal> - <signal name="instance"> + <signal name="instantiate"> <param index="0" name="files" type="PackedStringArray" /> <description> </description> diff --git a/doc/classes/FlowContainer.xml b/doc/classes/FlowContainer.xml index d449049ef1..7a324160c9 100644 --- a/doc/classes/FlowContainer.xml +++ b/doc/classes/FlowContainer.xml @@ -18,11 +18,25 @@ </method> </methods> <members> + <member name="alignment" type="int" setter="set_alignment" getter="get_alignment" enum="FlowContainer.AlignmentMode" default="0"> + The alignment of the container's children (must be one of [constant ALIGNMENT_BEGIN], [constant ALIGNMENT_CENTER], or [constant ALIGNMENT_END]). + </member> <member name="vertical" type="bool" setter="set_vertical" getter="is_vertical" default="false"> If [code]true[/code], the [FlowContainer] will arrange its children vertically, rather than horizontally. Can't be changed when using [HFlowContainer] and [VFlowContainer]. </member> </members> + <constants> + <constant name="ALIGNMENT_BEGIN" value="0" enum="AlignmentMode"> + The child controls will be arranged at the beginning of the container, i.e. top if orientation is vertical, left if orientation is horizontal (right for RTL layout). + </constant> + <constant name="ALIGNMENT_CENTER" value="1" enum="AlignmentMode"> + The child controls will be centered in the container. + </constant> + <constant name="ALIGNMENT_END" value="2" enum="AlignmentMode"> + The child controls will be arranged at the end of the container, i.e. bottom if orientation is vertical, right if orientation is horizontal (left for RTL layout). + </constant> + </constants> <theme_items> <theme_item name="h_separation" data_type="constant" type="int" default="4"> The horizontal separation of children nodes. diff --git a/doc/classes/FontFile.xml b/doc/classes/FontFile.xml index df378d9d2f..271f6a13e0 100644 --- a/doc/classes/FontFile.xml +++ b/doc/classes/FontFile.xml @@ -14,7 +14,6 @@ [b]Note:[/b] A character is a symbol that represents an item (letter, digit etc.) in an abstract way. [b]Note:[/b] A glyph is a bitmap or shape used to draw a one or more characters in a context-dependent manner. Glyph indices are bound to the specific font data source. [b]Note:[/b] If a none of the font data sources contain glyphs for a character used in a string, the character in question will be replaced with a box displaying its hexadecimal code. - [codeblocks] [gdscript] var f = load("res://BarlowCondensed-Bold.ttf") @@ -262,7 +261,7 @@ <param index="1" name="size" type="Vector2i" /> <param index="2" name="texture_index" type="int" /> <description> - Returns a copy of the array containing the first free pixel in the each column of texture. Should be the same size as texture width or empty. + Returns a copy of the array containing glyph packing data. </description> </method> <method name="get_transform" qualifiers="const"> @@ -522,7 +521,7 @@ <param index="2" name="texture_index" type="int" /> <param index="3" name="offset" type="PackedInt32Array" /> <description> - Sets array containing the first free pixel in the each column of texture. Should be the same size as texture width or empty (for the fonts without dynamic glyph generation support). + Sets array containing glyph packing data. </description> </method> <method name="set_transform"> @@ -589,7 +588,7 @@ Font style name. </member> <member name="subpixel_positioning" type="int" setter="set_subpixel_positioning" getter="get_subpixel_positioning" enum="TextServer.SubpixelPositioning" default="1"> - Font glyph sub-pixel positioning mode. Subpixel positioning provides shaper text and better kerning for smaller font sizes, at the cost of memory usage and font rasterization speed. Use [constant TextServer.SUBPIXEL_POSITIONING_AUTO] to automatically enable it based on the font size. + Font glyph subpixel positioning mode. Subpixel positioning provides shaper text and better kerning for smaller font sizes, at the cost of memory usage and font rasterization speed. Use [constant TextServer.SUBPIXEL_POSITIONING_AUTO] to automatically enable it based on the font size. </member> </members> </class> diff --git a/doc/classes/FontVariation.xml b/doc/classes/FontVariation.xml index 6aa381c2de..e0fad126b9 100644 --- a/doc/classes/FontVariation.xml +++ b/doc/classes/FontVariation.xml @@ -5,7 +5,6 @@ </brief_description> <description> OpenType variations, simulated bold / slant, and additional font settings like OpenType features and extra spacing. - To use simulated bold font variant: [codeblocks] [gdscript] diff --git a/doc/classes/GPUParticles2D.xml b/doc/classes/GPUParticles2D.xml index 043c08eed5..c7d10078e8 100644 --- a/doc/classes/GPUParticles2D.xml +++ b/doc/classes/GPUParticles2D.xml @@ -9,7 +9,8 @@ </description> <tutorials> <link title="Particle systems (2D)">$DOCS_URL/tutorials/2d/particle_systems_2d.html</link> - <link title="2D Dodge The Creeps Demo">https://godotengine.org/asset-library/asset/515</link> + <link title="2D Particles Demo">https://godotengine.org/asset-library/asset/118</link> + <link title="2D Dodge The Creeps Demo (uses GPUParticles2D for the trail behind the player)">https://godotengine.org/asset-library/asset/515</link> </tutorials> <methods> <method name="capture_rect" qualifiers="const"> @@ -88,12 +89,17 @@ Particle texture. If [code]null[/code], particles will be squares. </member> <member name="trail_enabled" type="bool" setter="set_trail_enabled" getter="is_trail_enabled" default="false"> + If [code]true[/code], enables particle trails using a mesh skinning system. + [b]Note:[/b] Unlike [GPUParticles3D], the number of trail sections and subdivisions is set with the [member trail_sections] and [member trail_section_subdivisions] properties. </member> - <member name="trail_length_secs" type="float" setter="set_trail_length" getter="get_trail_length" default="0.3"> + <member name="trail_lifetime" type="float" setter="set_trail_lifetime" getter="get_trail_lifetime" default="0.3"> + The amount of time the particle's trail should represent (in seconds). Only effective if [member trail_enabled] is [code]true[/code]. </member> <member name="trail_section_subdivisions" type="int" setter="set_trail_section_subdivisions" getter="get_trail_section_subdivisions" default="4"> + The number of subdivisions to use for the particle trail rendering. Higher values can result in smoother trail curves, at the cost of performance due to increased mesh complexity. See also [member trail_sections]. Only effective if [member trail_enabled] is [code]true[/code]. </member> <member name="trail_sections" type="int" setter="set_trail_sections" getter="get_trail_sections" default="8"> + The number of sections to use for the particle trail rendering. Higher values can result in smoother trail curves, at the cost of performance due to increased mesh complexity. See also [member trail_section_subdivisions]. Only effective if [member trail_enabled] is [code]true[/code]. </member> <member name="visibility_rect" type="Rect2" setter="set_visibility_rect" getter="get_visibility_rect" default="Rect2(-100, -100, 200, 200)"> The [Rect2] that determines the node's region which needs to be visible on screen for the particle system to be active. diff --git a/doc/classes/GPUParticles3D.xml b/doc/classes/GPUParticles3D.xml index d0be4d784a..ea53c5b4b5 100644 --- a/doc/classes/GPUParticles3D.xml +++ b/doc/classes/GPUParticles3D.xml @@ -116,8 +116,12 @@ <member name="sub_emitter" type="NodePath" setter="set_sub_emitter" getter="get_sub_emitter" default="NodePath("")"> </member> <member name="trail_enabled" type="bool" setter="set_trail_enabled" getter="is_trail_enabled" default="false"> + If [code]true[/code], enables particle trails using a mesh skinning system. Designed to work with [RibbonTrailMesh] and [TubeTrailMesh]. + [b]Note:[/b] [member BaseMaterial3D.use_particle_trails] must also be enabled on the particle mesh's material. Otherwise, setting [member trail_enabled] to [code]true[/code] will have no effect. + [b]Note:[/b] Unlike [GPUParticles2D], the number of trail sections and subdivisions is set in the [RibbonTrailMesh] or the [TubeTrailMesh]'s properties. </member> - <member name="trail_length_secs" type="float" setter="set_trail_length" getter="get_trail_length" default="0.3"> + <member name="trail_lifetime" type="float" setter="set_trail_lifetime" getter="get_trail_lifetime" default="0.3"> + The amount of time the particle's trail should represent (in seconds). Only effective if [member trail_enabled] is [code]true[/code]. </member> <member name="transform_align" type="int" setter="set_transform_align" getter="get_transform_align" enum="GPUParticles3D.TransformAlign" default="0"> </member> diff --git a/doc/classes/GeometryInstance3D.xml b/doc/classes/GeometryInstance3D.xml index 4d8ab91718..90a983d28b 100644 --- a/doc/classes/GeometryInstance3D.xml +++ b/doc/classes/GeometryInstance3D.xml @@ -13,6 +13,7 @@ <return type="Variant" /> <param index="0" name="name" type="StringName" /> <description> + Get the value of a shader parameter as set on this instance. </description> </method> <method name="set_custom_aabb"> @@ -27,26 +28,30 @@ <param index="0" name="name" type="StringName" /> <param index="1" name="value" type="Variant" /> <description> + Set the value of a shader parameter for this instance only. </description> </method> </methods> <members> - <member name="cast_shadow" type="int" setter="set_cast_shadows_setting" getter="get_cast_shadows_setting" enum="GeometryInstance3D.ShadowCastingSetting"> + <member name="cast_shadow" type="int" setter="set_cast_shadows_setting" getter="get_cast_shadows_setting" enum="GeometryInstance3D.ShadowCastingSetting" default="1"> The selected shadow casting flag. See [enum ShadowCastingSetting] for possible values. </member> - <member name="extra_cull_margin" type="float" setter="set_extra_cull_margin" getter="get_extra_cull_margin"> + <member name="extra_cull_margin" type="float" setter="set_extra_cull_margin" getter="get_extra_cull_margin" default="0.0"> The extra distance added to the GeometryInstance3D's bounding box ([AABB]) to increase its cull box. </member> - <member name="gi_lightmap_scale" type="int" setter="set_lightmap_scale" getter="get_lightmap_scale" enum="GeometryInstance3D.LightmapScale"> + <member name="gi_lightmap_scale" type="int" setter="set_lightmap_scale" getter="get_lightmap_scale" enum="GeometryInstance3D.LightmapScale" default="0"> The texel density to use for lightmapping in [LightmapGI]. Greater scale values provide higher resolution in the lightmap, which can result in sharper shadows for lights that have both direct and indirect light baked. However, greater scale values will also increase the space taken by the mesh in the lightmap texture, which increases the memory, storage, and bake time requirements. When using a single mesh at different scales, consider adjusting this value to keep the lightmap texel density consistent across meshes. </member> - <member name="gi_mode" type="int" setter="set_gi_mode" getter="get_gi_mode" enum="GeometryInstance3D.GIMode"> + <member name="gi_mode" type="int" setter="set_gi_mode" getter="get_gi_mode" enum="GeometryInstance3D.GIMode" default="1"> The global illumination mode to use for the whole geometry. To avoid inconsistent results, use a mode that matches the purpose of the mesh during gameplay (static/dynamic). [b]Note:[/b] Lights' bake mode will also affect the global illumination rendering. See [member Light3D.light_bake_mode]. </member> - <member name="ignore_occlusion_culling" type="bool" setter="set_ignore_occlusion_culling" getter="is_ignoring_occlusion_culling"> + <member name="ignore_occlusion_culling" type="bool" setter="set_ignore_occlusion_culling" getter="is_ignoring_occlusion_culling" default="false"> + If [code]true[/code], disables occlusion culling for this instance. Useful for gizmos that must be rendered even when occlusion culling is in use. </member> - <member name="lod_bias" type="float" setter="set_lod_bias" getter="get_lod_bias"> + <member name="lod_bias" type="float" setter="set_lod_bias" getter="get_lod_bias" default="1.0"> + Changes how quickly the mesh transitions to a lower level of detail. A value of 0 will force the mesh to its lowest level of detail, a value of 1 will use the default settings, and larger values will keep the mesh in a higher level of detail at farther distances. + Useful for testing level of detail transitions in the editor. </member> <member name="material_overlay" type="Material" setter="set_material_overlay" getter="get_material_overlay"> The material overlay for the whole geometry. @@ -56,26 +61,26 @@ The material override for the whole geometry. If a material is assigned to this property, it will be used instead of any material set in any material slot of the mesh. </member> - <member name="transparency" type="float" setter="set_transparency" getter="get_transparency"> + <member name="transparency" type="float" setter="set_transparency" getter="get_transparency" default="0.0"> The transparency applied to the whole geometry (as a multiplier of the materials' existing transparency). [code]0.0[/code] is fully opaque, while [code]1.0[/code] is fully transparent. Values greater than [code]0.0[/code] (exclusive) will force the geometry's materials to go through the transparent pipeline, which is slower to render and can exhibit rendering issues due to incorrect transparency sorting. However, unlike using a transparent material, setting [member transparency] to a value greater than [code]0.0[/code] (exclusive) will [i]not[/i] disable shadow rendering. In spatial shaders, [code]1.0 - transparency[/code] is set as the default value of the [code]ALPHA[/code] built-in. [b]Note:[/b] [member transparency] is clamped between [code]0.0[/code] and [code]1.0[/code], so this property cannot be used to make transparent materials more opaque than they originally are. </member> - <member name="visibility_range_begin" type="float" setter="set_visibility_range_begin" getter="get_visibility_range_begin"> + <member name="visibility_range_begin" type="float" setter="set_visibility_range_begin" getter="get_visibility_range_begin" default="0.0"> Starting distance from which the GeometryInstance3D will be visible, taking [member visibility_range_begin_margin] into account as well. The default value of 0 is used to disable the range check. </member> - <member name="visibility_range_begin_margin" type="float" setter="set_visibility_range_begin_margin" getter="get_visibility_range_begin_margin"> + <member name="visibility_range_begin_margin" type="float" setter="set_visibility_range_begin_margin" getter="get_visibility_range_begin_margin" default="0.0"> Margin for the [member visibility_range_begin] threshold. The GeometryInstance3D will only change its visibility state when it goes over or under the [member visibility_range_begin] threshold by this amount. If [member visibility_range_fade_mode] is [constant VISIBILITY_RANGE_FADE_DISABLED], this acts as an hysteresis distance. If [member visibility_range_fade_mode] is [constant VISIBILITY_RANGE_FADE_SELF] or [constant VISIBILITY_RANGE_FADE_DEPENDENCIES], this acts as a fade transition distance and must be set to a value greater than [code]0.0[/code] for the effect to be noticeable. </member> - <member name="visibility_range_end" type="float" setter="set_visibility_range_end" getter="get_visibility_range_end"> + <member name="visibility_range_end" type="float" setter="set_visibility_range_end" getter="get_visibility_range_end" default="0.0"> Distance from which the GeometryInstance3D will be hidden, taking [member visibility_range_end_margin] into account as well. The default value of 0 is used to disable the range check. </member> - <member name="visibility_range_end_margin" type="float" setter="set_visibility_range_end_margin" getter="get_visibility_range_end_margin"> + <member name="visibility_range_end_margin" type="float" setter="set_visibility_range_end_margin" getter="get_visibility_range_end_margin" default="0.0"> Margin for the [member visibility_range_end] threshold. The GeometryInstance3D will only change its visibility state when it goes over or under the [member visibility_range_end] threshold by this amount. If [member visibility_range_fade_mode] is [constant VISIBILITY_RANGE_FADE_DISABLED], this acts as an hysteresis distance. If [member visibility_range_fade_mode] is [constant VISIBILITY_RANGE_FADE_SELF] or [constant VISIBILITY_RANGE_FADE_DEPENDENCIES], this acts as a fade transition distance and must be set to a value greater than [code]0.0[/code] for the effect to be noticeable. </member> - <member name="visibility_range_fade_mode" type="int" setter="set_visibility_range_fade_mode" getter="get_visibility_range_fade_mode" enum="GeometryInstance3D.VisibilityRangeFadeMode"> + <member name="visibility_range_fade_mode" type="int" setter="set_visibility_range_fade_mode" getter="get_visibility_range_fade_mode" enum="GeometryInstance3D.VisibilityRangeFadeMode" default="0"> Controls which instances will be faded when approaching the limits of the visibility range. See [enum VisibilityRangeFadeMode] for possible values. </member> </members> diff --git a/doc/classes/GradientTexture1D.xml b/doc/classes/GradientTexture1D.xml index 3254754ac1..fa572eeed0 100644 --- a/doc/classes/GradientTexture1D.xml +++ b/doc/classes/GradientTexture1D.xml @@ -12,6 +12,7 @@ <member name="gradient" type="Gradient" setter="set_gradient" getter="get_gradient"> The [Gradient] that will be used to fill the texture. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="use_hdr" type="bool" setter="set_use_hdr" getter="is_using_hdr" default="false"> If [code]true[/code], the generated texture will support high dynamic range ([constant Image.FORMAT_RGBAF] format). This allows for glow effects to work if [member Environment.glow_enabled] is [code]true[/code]. If [code]false[/code], the generated texture will use low dynamic range; overbright colors will be clamped ([constant Image.FORMAT_RGBA8] format). </member> diff --git a/doc/classes/GradientTexture2D.xml b/doc/classes/GradientTexture2D.xml index 7561f1b947..87d86e7a59 100644 --- a/doc/classes/GradientTexture2D.xml +++ b/doc/classes/GradientTexture2D.xml @@ -27,6 +27,7 @@ <member name="repeat" type="int" setter="set_repeat" getter="get_repeat" enum="GradientTexture2D.Repeat" default="0"> The gradient repeat type, one of the [enum Repeat] values. The texture is filled starting from [member fill_from] to [member fill_to] offsets by default, but the gradient fill can be repeated to cover the entire texture. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="use_hdr" type="bool" setter="set_use_hdr" getter="is_using_hdr" default="false"> If [code]true[/code], the generated texture will support high dynamic range ([constant Image.FORMAT_RGBAF] format). This allows for glow effects to work if [member Environment.glow_enabled] is [code]true[/code]. If [code]false[/code], the generated texture will use low dynamic range; overbright colors will be clamped ([constant Image.FORMAT_RGBA8] format). </member> diff --git a/doc/classes/HSlider.xml b/doc/classes/HSlider.xml index cb0a8b34db..19bb26a1b0 100644 --- a/doc/classes/HSlider.xml +++ b/doc/classes/HSlider.xml @@ -29,6 +29,7 @@ The background of the area to the left of the grabber. </theme_item> <theme_item name="grabber_area_highlight" data_type="style" type="StyleBox"> + The background of the area to the left of the grabber that displays when it's being hovered or focused. </theme_item> <theme_item name="slider" data_type="style" type="StyleBox"> The background for the whole slider. Determines the height of the [code]grabber_area[/code]. diff --git a/doc/classes/HTTPRequest.xml b/doc/classes/HTTPRequest.xml index 64a3315308..c504e26d58 100644 --- a/doc/classes/HTTPRequest.xml +++ b/doc/classes/HTTPRequest.xml @@ -30,7 +30,6 @@ if error != OK: push_error("An error occurred in the HTTP request.") - # Called when the HTTP request is completed. func _http_request_completed(result, response_code, headers, body): var json = JSON.new() @@ -95,7 +94,6 @@ if error != OK: push_error("An error occurred in the HTTP request.") - # Called when the HTTP request is completed. func _http_request_completed(result, response_code, headers, body): if result != HTTPRequest.RESULT_SUCCESS: diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml index 88cea6820e..be66b8a7b9 100644 --- a/doc/classes/Image.xml +++ b/doc/classes/Image.xml @@ -118,7 +118,7 @@ <param index="2" name="use_mipmaps" type="bool" /> <param index="3" name="format" type="int" enum="Image.Format" /> <description> - Creates an empty image of given size and format. See [enum Format] constants. If [param use_mipmaps] is [code]true[/code] then generate mipmaps for this image. See the [method generate_mipmaps]. + Creates an empty image of given size and format. See [enum Format] constants. If [param use_mipmaps] is [code]true[/code], then generate mipmaps for this image. See the [method generate_mipmaps]. </description> </method> <method name="create_from_data" qualifiers="static"> @@ -241,11 +241,11 @@ This is the same as [method get_pixel], but with a [Vector2i] argument instead of two integer arguments. </description> </method> - <method name="get_rect" qualifiers="const"> + <method name="get_region" qualifiers="const"> <return type="Image" /> - <param index="0" name="rect" type="Rect2i" /> + <param index="0" name="region" type="Rect2i" /> <description> - Returns a new image that is a copy of the image's area specified with [param rect]. + Returns a new [Image] that is a copy of this [Image]'s area specified with [param region]. </description> </method> <method name="get_size" qualifiers="const"> @@ -471,7 +471,8 @@ <param index="1" name="y" type="int" /> <param index="2" name="color" type="Color" /> <description> - Sets the [Color] of the pixel at [code](x, y)[/code] to [param color]. Example: + Sets the [Color] of the pixel at [code](x, y)[/code] to [param color]. + [b]Example:[/b] [codeblocks] [gdscript] var img_width = 10 @@ -498,7 +499,8 @@ <param index="0" name="point" type="Vector2i" /> <param index="1" name="color" type="Color" /> <description> - Sets the [Color] of the pixel at [param point] to [param color]. Example: + Sets the [Color] of the pixel at [param point] to [param color]. + [b]Example:[/b] [codeblocks] [gdscript] var img_width = 10 diff --git a/doc/classes/ImageTexture.xml b/doc/classes/ImageTexture.xml index 45cbd7ac87..03d1947475 100644 --- a/doc/classes/ImageTexture.xml +++ b/doc/classes/ImageTexture.xml @@ -67,4 +67,7 @@ </description> </method> </methods> + <members> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> + </members> </class> diff --git a/doc/classes/ImageTexture3D.xml b/doc/classes/ImageTexture3D.xml index 958c5f90f1..ee26a959aa 100644 --- a/doc/classes/ImageTexture3D.xml +++ b/doc/classes/ImageTexture3D.xml @@ -1,8 +1,11 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="ImageTexture3D" inherits="Texture3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Texture with 3 dimensions. </brief_description> <description> + [ImageTexture3D] is a 3-dimensional [ImageTexture] that has a width, height, and depth. See also [ImageTextureLayered]. + 3D textures are typically used to store density maps for [FogMaterial], color correction LUTs for [Environment], vector fields for [GPUParticlesAttractorVectorField3D] and collision maps for [GPUParticlesCollisionSDF3D]. 3D textures can also be used in custom shaders. </description> <tutorials> </tutorials> @@ -16,12 +19,14 @@ <param index="4" name="use_mipmaps" type="bool" /> <param index="5" name="data" type="Image[]" /> <description> + Creates the [ImageTexture3D] with specified [param width], [param height], and [param depth]. See [enum Image.Format] for [param format] options. If [param use_mipmaps] is [code]true[/code], then generate mipmaps for the [ImageTexture3D]. </description> </method> <method name="update"> <return type="void" /> <param index="0" name="data" type="Image[]" /> <description> + Replaces the texture's existing data with the layers specified in [code]data[/code]. The size of [code]data[/code] must match the parameters that were used for [method create]. In other words, the texture cannot be resized or have its format changed by calling [method update]. </description> </method> </methods> diff --git a/doc/classes/ImageTextureLayered.xml b/doc/classes/ImageTextureLayered.xml index f5786f070a..0aa1d65d5a 100644 --- a/doc/classes/ImageTextureLayered.xml +++ b/doc/classes/ImageTextureLayered.xml @@ -1,8 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="ImageTextureLayered" inherits="TextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Base class for texture types which contain the data of multiple [ImageTexture]s. Each image is of the same size and format. </brief_description> <description> + Base class for [Texture2DArray], [Cubemap] and [CubemapArray]. Cannot be used directly, but contains all the functions necessary for accessing the derived resource types. See also [Texture3D]. </description> <tutorials> </tutorials> @@ -11,7 +13,7 @@ <return type="int" enum="Error" /> <param index="0" name="images" type="Image[]" /> <description> - Creates an [ImageTextureLayered] from an array of [Image]s. The first image decides the width, height, image format and mipmapping setting. The other images must have the same width, height, image format and mipmapping setting. + Creates an [ImageTextureLayered] from an array of [Image]s. See [method Image.create] for the expected data format. The first image decides the width, height, image format and mipmapping setting. The other images [i]must[/i] have the same width, height, image format and mipmapping setting. Each [Image] represents one [code]layer[/code]. </description> </method> @@ -23,7 +25,7 @@ Replaces the existing [Image] data at the given [code]layer[/code] with this new image. The given [Image] must have the same width, height, image format and mipmapping setting (a [code]bool[/code] value) as the rest of the referenced images. If the image format is unsupported, it will be decompressed and converted to a similar and supported [enum Image.Format]. - The update is immediate: synced with the draw. + The update is immediate: it's synchronized with drawing. </description> </method> </methods> diff --git a/doc/classes/ImporterMesh.xml b/doc/classes/ImporterMesh.xml index 1c9655c266..b80857a7bf 100644 --- a/doc/classes/ImporterMesh.xml +++ b/doc/classes/ImporterMesh.xml @@ -5,7 +5,6 @@ </brief_description> <description> ImporterMesh is a type of [Resource] analogous to [ArrayMesh]. It contains vertex array-based geometry, divided in [i]surfaces[/i]. Each surface contains a completely separate array and a material used to draw it. Design wise, a mesh with multiple surfaces is preferred to a single surface, because objects created in 3D editing software commonly contain multiple materials. - Unlike its runtime counterpart, [ImporterMesh] contains mesh data before various import steps, such as lod and shadow mesh generation, have taken place. Modify surface data by calling [method clear], followed by [method add_surface] for each surface. </description> <tutorials> diff --git a/doc/classes/Input.xml b/doc/classes/Input.xml index 56b95fc755..d246e64251 100644 --- a/doc/classes/Input.xml +++ b/doc/classes/Input.xml @@ -157,7 +157,7 @@ <method name="get_mouse_button_mask" qualifiers="const"> <return type="int" enum="MouseButton" /> <description> - Returns mouse buttons as a bitmask. If multiple mouse buttons are pressed at the same time, the bits are added together. + Returns mouse buttons as a bitmask. If multiple mouse buttons are pressed at the same time, the bits are added together. Equivalent to [method DisplayServer.mouse_get_button_state]. </description> </method> <method name="get_vector" qualifiers="const"> @@ -254,7 +254,7 @@ <param index="0" name="event" type="InputEvent" /> <description> Feeds an [InputEvent] to the game. Can be used to artificially trigger input events from code. Also generates [method Node._input] calls. - Example: + [b]Example:[/b] [codeblocks] [gdscript] var cancel_event = InputEventAction.new() @@ -366,7 +366,7 @@ <param index="0" name="position" type="Vector2" /> <description> Sets the mouse position to the specified vector, provided in pixels and relative to an origin at the upper left corner of the currently focused Window Manager game window. - Mouse position is clipped to the limits of the screen resolution, or to the limits of the game window if [enum MouseMode] is set to [code]MOUSE_MODE_CONFINED[/code] or [code]MOUSE_MODE_CONFINED_HIDDEN[/code]. + Mouse position is clipped to the limits of the screen resolution, or to the limits of the game window if [enum MouseMode] is set to [constant MOUSE_MODE_CONFINED] or [constant MOUSE_MODE_CONFINED_HIDDEN]. </description> </method> </methods> diff --git a/doc/classes/InputEventMIDI.xml b/doc/classes/InputEventMIDI.xml index 04d8cab065..67e7ced2e8 100644 --- a/doc/classes/InputEventMIDI.xml +++ b/doc/classes/InputEventMIDI.xml @@ -69,18 +69,18 @@ The MIDI channel of this input event. There are 16 channels, so this value ranges from 0 to 15. MIDI channel 9 is reserved for the use with percussion instruments, the rest of the channels are for non-percussion instruments. </member> <member name="controller_number" type="int" setter="set_controller_number" getter="get_controller_number" default="0"> - If the message is [code]MIDI_MESSAGE_CONTROL_CHANGE[/code], this indicates the controller number, otherwise this is zero. Controllers include devices such as pedals and levers. + If the message is [constant MIDI_MESSAGE_CONTROL_CHANGE], this indicates the controller number, otherwise this is zero. Controllers include devices such as pedals and levers. </member> <member name="controller_value" type="int" setter="set_controller_value" getter="get_controller_value" default="0"> - If the message is [code]MIDI_MESSAGE_CONTROL_CHANGE[/code], this indicates the controller value, otherwise this is zero. Controllers include devices such as pedals and levers. + If the message is [constant MIDI_MESSAGE_CONTROL_CHANGE], this indicates the controller value, otherwise this is zero. Controllers include devices such as pedals and levers. </member> <member name="instrument" type="int" setter="set_instrument" getter="get_instrument" default="0"> The instrument of this input event. This value ranges from 0 to 127. Refer to the instrument list on the General MIDI wikipedia article to see a list of instruments, except that this value is 0-index, so subtract one from every number on that chart. A standard piano will have an instrument number of 0. </member> <member name="message" type="int" setter="set_message" getter="get_message" enum="MIDIMessage" default="0"> - Returns a value indicating the type of message for this MIDI signal. This is a member of the [enum @GlobalScope.MIDIMessage] enum. + Returns a value indicating the type of message for this MIDI signal. This is a member of the [enum MIDIMessage] enum. For MIDI messages between 0x80 and 0xEF, only the left half of the bits are returned as this value, as the other part is the channel (ex: 0x94 becomes 0x9). For MIDI messages from 0xF0 to 0xFF, the value is returned as-is. - Notes will return [code]MIDI_MESSAGE_NOTE_ON[/code] when activated, but they might not always return [code]MIDI_MESSAGE_NOTE_OFF[/code] when deactivated, therefore your code should treat the input as stopped if some period of time has passed. + Notes will return [constant MIDI_MESSAGE_NOTE_ON] when activated, but they might not always return [constant MIDI_MESSAGE_NOTE_OFF] when deactivated, therefore your code should treat the input as stopped if some period of time has passed. For more information, see the MIDI message status byte list chart linked above. </member> <member name="pitch" type="int" setter="set_pitch" getter="get_pitch" default="0"> diff --git a/doc/classes/JSON.xml b/doc/classes/JSON.xml index 125d016632..93731cf553 100644 --- a/doc/classes/JSON.xml +++ b/doc/classes/JSON.xml @@ -54,7 +54,7 @@ <param index="0" name="json_string" type="String" /> <description> Attempts to parse the [param json_string] provided. - Returns an [enum Error]. If the parse was successful, it returns [code]OK[/code] and the result can be retrieved using [member data]. If unsuccessful, use [method get_error_line] and [method get_error_message] for identifying the source of the failure. + Returns an [enum Error]. If the parse was successful, it returns [constant OK] and the result can be retrieved using [member data]. If unsuccessful, use [method get_error_line] and [method get_error_message] for identifying the source of the failure. Non-static variant of [method parse_string], if you want custom error handling. </description> </method> diff --git a/doc/classes/JavaScriptObject.xml b/doc/classes/JavaScriptObject.xml index 26792bd19e..7132cc5cad 100644 --- a/doc/classes/JavaScriptObject.xml +++ b/doc/classes/JavaScriptObject.xml @@ -5,7 +5,7 @@ </brief_description> <description> JavaScriptObject is used to interact with JavaScript objects retrieved or created via [method JavaScriptBridge.get_interface], [method JavaScriptBridge.create_object], or [method JavaScriptBridge.create_callback]. - Example: + [b]Example:[/b] [codeblock] extends Node diff --git a/doc/classes/Label.xml b/doc/classes/Label.xml index 615aceac53..cd87b4558f 100644 --- a/doc/classes/Label.xml +++ b/doc/classes/Label.xml @@ -50,6 +50,7 @@ Controls the text's horizontal alignment. Supports left, center, right, and fill, or justify. Set it to one of the [enum HorizontalAlignment] constants. </member> <member name="label_settings" type="LabelSettings" setter="set_label_settings" getter="get_label_settings"> + A [LabelSettings] resource that can be shared between multiple [Label] nodes. Takes priority over theme properties. </member> <member name="language" type="String" setter="set_language" getter="get_language" default=""""> Language code used for line-breaking and text shaping algorithms, if left empty current locale is used instead. @@ -100,7 +101,7 @@ Default text [Color] of the [Label]. </theme_item> <theme_item name="font_outline_color" data_type="color" type="Color" default="Color(1, 1, 1, 1)"> - The tint of text outline. + The color of text outline. </theme_item> <theme_item name="font_shadow_color" data_type="color" type="Color" default="Color(0, 0, 0, 0)"> [Color] of the text's shadow effect. diff --git a/doc/classes/Label3D.xml b/doc/classes/Label3D.xml index b741dc6e64..0cbca2224e 100644 --- a/doc/classes/Label3D.xml +++ b/doc/classes/Label3D.xml @@ -44,6 +44,7 @@ <member name="billboard" type="int" setter="set_billboard_mode" getter="get_billboard_mode" enum="BaseMaterial3D.BillboardMode" default="0"> The billboard mode to use for the label. See [enum BaseMaterial3D.BillboardMode] for possible values. </member> + <member name="cast_shadow" type="int" setter="set_cast_shadows_setting" getter="get_cast_shadows_setting" overrides="GeometryInstance3D" enum="GeometryInstance3D.ShadowCastingSetting" default="0" /> <member name="double_sided" type="bool" setter="set_draw_flag" getter="get_draw_flag" default="true"> If [code]true[/code], text can be seen from the back as well, if [code]false[/code], it is invisible when looking at it from behind. </member> @@ -57,6 +58,7 @@ Font size of the [Label3D]'s text. To make the font look more detailed when up close, increase [member font_size] while decreasing [member pixel_size] at the same time. Higher font sizes require more time to render new characters, which can cause stuttering during gameplay. </member> + <member name="gi_mode" type="int" setter="set_gi_mode" getter="get_gi_mode" overrides="GeometryInstance3D" enum="GeometryInstance3D.GIMode" default="0" /> <member name="horizontal_alignment" type="int" setter="set_horizontal_alignment" getter="get_horizontal_alignment" enum="HorizontalAlignment" default="1"> Controls the text's horizontal alignment. Supports left, center, right, and fill, or justify. Set it to one of the [enum HorizontalAlignment] constants. </member> diff --git a/doc/classes/LabelSettings.xml b/doc/classes/LabelSettings.xml index aa972f2cf3..d73cb78295 100644 --- a/doc/classes/LabelSettings.xml +++ b/doc/classes/LabelSettings.xml @@ -1,29 +1,40 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="LabelSettings" inherits="Resource" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Collection of common settings to customize label text. </brief_description> <description> + [LabelSettings] is a resource that can be assigned to a [Label] node to customize it. It will take priority over the properties defined in theme. The resource can be shared between multiple labels and swapped on the fly, so it's convenient and flexible way to setup text style. </description> <tutorials> </tutorials> <members> <member name="font" type="Font" setter="set_font" getter="get_font"> + [Font] used for the text. </member> <member name="font_color" type="Color" setter="set_font_color" getter="get_font_color" default="Color(1, 1, 1, 1)"> + Color of the text. </member> <member name="font_size" type="int" setter="set_font_size" getter="get_font_size" default="16"> + Size of the text. </member> <member name="line_spacing" type="float" setter="set_line_spacing" getter="get_line_spacing" default="3.0"> + Vertical space between lines when the text is multiline. </member> <member name="outline_color" type="Color" setter="set_outline_color" getter="get_outline_color" default="Color(1, 1, 1, 1)"> + The color of the outline. </member> <member name="outline_size" type="int" setter="set_outline_size" getter="get_outline_size" default="0"> + Text outline size. </member> <member name="shadow_color" type="Color" setter="set_shadow_color" getter="get_shadow_color" default="Color(0, 0, 0, 0)"> + Color of the shadow effect. If alpha is [code]0[/code], no shadow will be drawn. </member> <member name="shadow_offset" type="Vector2" setter="set_shadow_offset" getter="get_shadow_offset" default="Vector2(1, 1)"> + Offset of the shadow effect, in pixels. </member> <member name="shadow_size" type="int" setter="set_shadow_size" getter="get_shadow_size" default="1"> + Size of the shadow effect. </member> </members> </class> diff --git a/doc/classes/Light3D.xml b/doc/classes/Light3D.xml index e9ebbc0a41..60e20cd97d 100644 --- a/doc/classes/Light3D.xml +++ b/doc/classes/Light3D.xml @@ -55,6 +55,7 @@ </member> <member name="light_angular_distance" type="float" setter="set_param" getter="get_param" default="0.0"> The light's angular size in degrees. Increasing this will make shadows softer at greater distances. Only available for [DirectionalLight3D]s. For reference, the Sun from the Earth is approximately [code]0.5[/code]. + [b]Note:[/b] [member light_angular_distance] is not affected by [member Node3D.scale] (the light's scale or its parent's scale). </member> <member name="light_bake_mode" type="int" setter="set_bake_mode" getter="get_bake_mode" enum="Light3D.BakeMode" default="2"> The light's bake mode. This will affect the global illumination techniques that have an effect on the light's rendering. See [enum BakeMode]. @@ -91,6 +92,7 @@ </member> <member name="light_size" type="float" setter="set_param" getter="get_param" default="0.0"> The size of the light in Godot units. Only available for [OmniLight3D]s and [SpotLight3D]s. Increasing this value will make the light fade out slower and shadows appear blurrier. This can be used to simulate area lights to an extent. + [b]Note:[/b] [member light_size] is not affected by [member Node3D.scale] (the light's scale or its parent's scale). </member> <member name="light_specular" type="float" setter="set_param" getter="get_param" default="0.5"> The intensity of the specular blob in objects affected by the light. At [code]0[/code], the light becomes a pure diffuse light. When not baking emission, this can be used to avoid unrealistic reflections when placing lights above an emissive surface. diff --git a/doc/classes/LineEdit.xml b/doc/classes/LineEdit.xml index 14fb864ca8..e57cc68b36 100644 --- a/doc/classes/LineEdit.xml +++ b/doc/classes/LineEdit.xml @@ -224,6 +224,9 @@ <member name="secret_character" type="String" setter="set_secret_character" getter="get_secret_character" default=""•""> The character to use to mask secret input (defaults to "•"). Only a single character can be used as the secret character. </member> + <member name="select_all_on_focus" type="bool" setter="set_select_all_on_focus" getter="is_select_all_on_focus" default="false"> + If [code]true[/code], the [LineEdit] will select the whole text when it gains focus. + </member> <member name="selecting_enabled" type="bool" setter="set_selecting_enabled" getter="is_selecting_enabled" default="true"> If [code]false[/code], it's impossible to select the text using mouse nor keyboard. </member> diff --git a/doc/classes/LinkButton.xml b/doc/classes/LinkButton.xml index 7c6ff2d4e1..d7701ea184 100644 --- a/doc/classes/LinkButton.xml +++ b/doc/classes/LinkButton.xml @@ -10,9 +10,11 @@ <tutorials> </tutorials> <members> + <member name="focus_mode" type="int" setter="set_focus_mode" getter="get_focus_mode" overrides="Control" enum="Control.FocusMode" default="0" /> <member name="language" type="String" setter="set_language" getter="get_language" default=""""> Language code used for line-breaking and text shaping algorithms, if left empty current locale is used instead. </member> + <member name="mouse_default_cursor_shape" type="int" setter="set_default_cursor_shape" getter="get_default_cursor_shape" overrides="Control" enum="Control.CursorShape" default="2" /> <member name="structured_text_bidi_override" type="int" setter="set_structured_text_bidi_override" getter="get_structured_text_bidi_override" enum="TextServer.StructuredTextParser" default="0"> Set BiDi algorithm override for the structured text. </member> diff --git a/doc/classes/Marker3D.xml b/doc/classes/Marker3D.xml index 5ad1cdf513..0d49b376a8 100644 --- a/doc/classes/Marker3D.xml +++ b/doc/classes/Marker3D.xml @@ -8,4 +8,9 @@ </description> <tutorials> </tutorials> + <members> + <member name="gizmo_extents" type="float" setter="set_gizmo_extents" getter="get_gizmo_extents" default="0.25"> + Size of the gizmo cross that appears in the editor. + </member> + </members> </class> diff --git a/doc/classes/Mesh.xml b/doc/classes/Mesh.xml index facbe5fd0f..4d3fb7ed5c 100644 --- a/doc/classes/Mesh.xml +++ b/doc/classes/Mesh.xml @@ -97,7 +97,7 @@ </description> </method> <method name="create_convex_shape" qualifiers="const"> - <return type="Shape3D" /> + <return type="ConvexPolygonShape3D" /> <param index="0" name="clean" type="bool" default="true" /> <param index="1" name="simplify" type="bool" default="false" /> <description> @@ -115,7 +115,7 @@ </description> </method> <method name="create_trimesh_shape" qualifiers="const"> - <return type="Shape3D" /> + <return type="ConcavePolygonShape3D" /> <description> Calculate a [ConcavePolygonShape3D] from the mesh. </description> @@ -176,7 +176,7 @@ </method> </methods> <members> - <member name="lightmap_size_hint" type="Vector2i" setter="set_lightmap_size_hint" getter="get_lightmap_size_hint"> + <member name="lightmap_size_hint" type="Vector2i" setter="set_lightmap_size_hint" getter="get_lightmap_size_hint" default="Vector2i(0, 0)"> Sets a hint to be used for lightmap resolution. </member> </members> diff --git a/doc/classes/MeshTexture.xml b/doc/classes/MeshTexture.xml index 8e2bccc79f..d09fa4c898 100644 --- a/doc/classes/MeshTexture.xml +++ b/doc/classes/MeshTexture.xml @@ -18,5 +18,6 @@ <member name="mesh" type="Mesh" setter="set_mesh" getter="get_mesh"> Sets the mesh used to draw. It must be a mesh using 2D vertices. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> </members> </class> diff --git a/doc/classes/MissingNode.xml b/doc/classes/MissingNode.xml index b5aa02cfd6..ac54329313 100644 --- a/doc/classes/MissingNode.xml +++ b/doc/classes/MissingNode.xml @@ -4,7 +4,7 @@ This is an internal editor class intended for keeping data of nodes of unknown type. </brief_description> <description> - This is an internal editor class intended for keeping data of nodes of unknown type (most likely this type was supplied by an extension that is no longer loaded). It can´t be manually instantiated or placed in the scene. Ignore it if you don't know what it is. + This is an internal editor class intended for keeping data of nodes of unknown type (most likely this type was supplied by an extension that is no longer loaded). It can't be manually instantiated or placed in the scene. Ignore it if you don't know what it is. </description> <tutorials> </tutorials> diff --git a/doc/classes/MissingResource.xml b/doc/classes/MissingResource.xml index eede6350d8..e5a6c4d064 100644 --- a/doc/classes/MissingResource.xml +++ b/doc/classes/MissingResource.xml @@ -4,7 +4,7 @@ This is an internal editor class intended for keeping data of resources of unknown type. </brief_description> <description> - This is an internal editor class intended for keeping data of resources of unknown type (most likely this type was supplied by an extension that is no longer loaded). It can´t be manually instantiated or placed in the scene. Ignore it if you don't know what it is. + This is an internal editor class intended for keeping data of resources of unknown type (most likely this type was supplied by an extension that is no longer loaded). It can't be manually instantiated or placed in the scene. Ignore it if you don't know what it is. </description> <tutorials> </tutorials> diff --git a/doc/classes/MovieWriter.xml b/doc/classes/MovieWriter.xml index f2509ad2b2..1652dd52aa 100644 --- a/doc/classes/MovieWriter.xml +++ b/doc/classes/MovieWriter.xml @@ -4,7 +4,7 @@ Abstract class for non-real-time video recording encoders. </brief_description> <description> - Godot can record videos with non-real-time simulation. Like the [code]--fixed-fps[/code] command line argument, this forces the reported [code]delta[/code] in [method Node._process] functions to be identical across frames, regardless of how long it actually took to render the frame. This can be used to record high-quality videos with perfect frame pacing regardless of your hardware's capabilities. + Godot can record videos with non-real-time simulation. Like the [code]--fixed-fps[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url], this forces the reported [code]delta[/code] in [method Node._process] functions to be identical across frames, regardless of how long it actually took to render the frame. This can be used to record high-quality videos with perfect frame pacing regardless of your hardware's capabilities. Godot has 2 built-in [MovieWriter]s: - AVI container with MJPEG for video and uncompressed audio ([code].avi[/code] file extension). Lossy compression, medium file sizes, fast encoding. The lossy compression quality can be adjusted by changing [member ProjectSettings.editor/movie_writer/mjpeg_quality]. The resulting file can be viewed in most video players, but it must be converted to another format for viewing on the web or by Godot with [VideoStreamPlayer]. MJPEG does not support transparency. AVI output is currently limited to a file of 4 GB in size at most. - PNG image sequence for video and WAV for audio ([code].png[/code] file extension). Lossless compression, large file sizes, slow encoding. Designed to be encoded to a video file with another tool such as [url=https://ffmpeg.org/]FFmpeg[/url] after recording. Transparency is currently not supported, even if the root viewport is set to be transparent. @@ -46,7 +46,7 @@ <param index="1" name="fps" type="int" /> <param index="2" name="base_path" type="String" /> <description> - Called once before the engine starts writing video and audio data. [param movie_size] is the width and height of the video to save. [param fps] is the number of frames per second specified in the project settings or using the [code]--fixed-fps <fps>[/code] command line argument. + Called once before the engine starts writing video and audio data. [param movie_size] is the width and height of the video to save. [param fps] is the number of frames per second specified in the project settings or using the [code]--fixed-fps <fps>[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url]. </description> </method> <method name="_write_end" qualifiers="virtual"> diff --git a/doc/classes/MultiplayerPeer.xml b/doc/classes/MultiplayerPeer.xml index 0f57ff9e55..dd7dac3f23 100644 --- a/doc/classes/MultiplayerPeer.xml +++ b/doc/classes/MultiplayerPeer.xml @@ -1,11 +1,11 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="MultiplayerPeer" inherits="PacketPeer" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> - A high-level network interface to simplify multiplayer interactions. + Abstract class for specialized [PacketPeer]s used by the [MultiplayerAPI]. </brief_description> <description> - Manages the connection to multiplayer peers. Assigns unique IDs to each client connected to the server. See also [MultiplayerAPI]. - [b]Note:[/b] The high-level multiplayer API protocol is an implementation detail and isn't meant to be used by non-Godot servers. It may change without notice. + Manages the connection with one or more remote peers acting as server or client and assigning unique IDs to each of them. See also [MultiplayerAPI]. + [b]Note:[/b] The [MultiplayerAPI] protocol is an implementation detail and isn't meant to be used by non-Godot servers. It may change without notice. [b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android. </description> <tutorials> @@ -13,6 +13,20 @@ <link title="WebRTC Signaling Demo">https://godotengine.org/asset-library/asset/537</link> </tutorials> <methods> + <method name="close"> + <return type="void" /> + <description> + Immediately close the multiplayer peer returning to the state [constant CONNECTION_DISCONNECTED]. Connected peers will be dropped without emitting [signal peer_disconnected]. + </description> + </method> + <method name="disconnect_peer"> + <return type="void" /> + <param index="0" name="peer" type="int" /> + <param index="1" name="force" type="bool" default="false" /> + <description> + Disconnects the given [param peer] from this host. If [param force] is [code]true[/code] the [signal peer_disconnected] signal will not be emitted for this peer. + </description> + </method> <method name="generate_unique_id" qualifiers="const"> <return type="int" /> <description> @@ -25,10 +39,22 @@ Returns the current state of the connection. See [enum ConnectionStatus]. </description> </method> + <method name="get_packet_channel" qualifiers="const"> + <return type="int" /> + <description> + Returns the channel over which the next available packet was received. See [method PacketPeer.get_available_packet_count]. + </description> + </method> + <method name="get_packet_mode" qualifiers="const"> + <return type="int" enum="MultiplayerPeer.TransferMode" /> + <description> + Returns the [enum MultiplayerPeer.TransferMode] the remote peer used to send the next available packet. See [method PacketPeer.get_available_packet_count]. + </description> + </method> <method name="get_packet_peer" qualifiers="const"> <return type="int" /> <description> - Returns the ID of the [MultiplayerPeer] who sent the most recent packet. + Returns the ID of the [MultiplayerPeer] who sent the next available packet. See [method PacketPeer.get_available_packet_count]. </description> </method> <method name="get_unique_id" qualifiers="const"> @@ -37,6 +63,12 @@ Returns the ID of this [MultiplayerPeer]. </description> </method> + <method name="is_server_relay_supported" qualifiers="const"> + <return type="bool" /> + <description> + Returns true if the server can act as a relay in the current configuration (i.e. if the higher level [MultiplayerAPI] should notify connected clients of other peers, and implement a relay protocol to allow communication between them). + </description> + </method> <method name="poll"> <return type="void" /> <description> @@ -61,53 +93,38 @@ [b]Note:[/b] The default channel ([code]0[/code]) actually works as 3 separate channels (one for each [enum TransferMode]) so that [constant TRANSFER_MODE_RELIABLE] and [constant TRANSFER_MODE_UNRELIABLE_ORDERED] does not interact with each other by default. Refer to the specific network API documentation (e.g. ENet or WebRTC) to learn how to set up channels correctly. </member> <member name="transfer_mode" type="int" setter="set_transfer_mode" getter="get_transfer_mode" enum="MultiplayerPeer.TransferMode" default="2"> - The manner in which to send packets to the [code]target_peer[/code]. See [enum TransferMode]. + The manner in which to send packets to the target peer. See [enum TransferMode], and the [method set_target_peer] method. </member> </members> <signals> - <signal name="connection_failed"> - <description> - Emitted when a connection attempt fails. - </description> - </signal> - <signal name="connection_succeeded"> - <description> - Emitted when a connection attempt succeeds. - </description> - </signal> <signal name="peer_connected"> <param index="0" name="id" type="int" /> <description> - Emitted by the server when a client connects. + Emitted when a remote peer connects. </description> </signal> <signal name="peer_disconnected"> <param index="0" name="id" type="int" /> <description> - Emitted by the server when a client disconnects. - </description> - </signal> - <signal name="server_disconnected"> - <description> - Emitted by clients when the server disconnects. + Emitted when a remote peer has disconnected. </description> </signal> </signals> <constants> <constant name="CONNECTION_DISCONNECTED" value="0" enum="ConnectionStatus"> - The ongoing connection disconnected. + The MultiplayerPeer is disconnected. </constant> <constant name="CONNECTION_CONNECTING" value="1" enum="ConnectionStatus"> - A connection attempt is ongoing. + The MultiplayerPeer is currently connecting to a server. </constant> <constant name="CONNECTION_CONNECTED" value="2" enum="ConnectionStatus"> - The connection attempt succeeded. + This MultiplayerPeer is connected. </constant> <constant name="TARGET_PEER_BROADCAST" value="0"> - Packets are sent to the server and then redistributed to other peers. + Packets are sent to all connected peers. </constant> <constant name="TARGET_PEER_SERVER" value="1"> - Packets are sent to the server alone. + Packets are sent to the remote peer acting as server. </constant> <constant name="TRANSFER_MODE_UNRELIABLE" value="0" enum="TransferMode"> Packets are not acknowledged, no resend attempts are made for lost packets. Packets may arrive in any order. Potentially faster than [constant TRANSFER_MODE_UNRELIABLE_ORDERED]. Use for non-critical data, and always consider whether the order matters. diff --git a/doc/classes/MultiplayerPeerExtension.xml b/doc/classes/MultiplayerPeerExtension.xml index 18bc18e6e7..5717135b80 100644 --- a/doc/classes/MultiplayerPeerExtension.xml +++ b/doc/classes/MultiplayerPeerExtension.xml @@ -9,6 +9,20 @@ <tutorials> </tutorials> <methods> + <method name="_close" qualifiers="virtual"> + <return type="void" /> + <description> + Called when the multiplayer peer should be immediately closed (see [method MultiplayerPeer.close]). + </description> + </method> + <method name="_disconnect_peer" qualifiers="virtual"> + <return type="void" /> + <param index="0" name="p_peer" type="int" /> + <param index="1" name="p_force" type="bool" /> + <description> + Called when the connected [param p_peer] should be forcibly disconnected (see [method MultiplayerPeer.disconnect_peer]). + </description> + </method> <method name="_get_available_packet_count" qualifiers="virtual const"> <return type="int" /> <description> diff --git a/doc/classes/NavigationAgent2D.xml b/doc/classes/NavigationAgent2D.xml index 3437e0eca4..8cf7824ff7 100644 --- a/doc/classes/NavigationAgent2D.xml +++ b/doc/classes/NavigationAgent2D.xml @@ -5,7 +5,7 @@ </brief_description> <description> 2D Agent that is used in navigation to reach a location while avoiding static and dynamic obstacles. The dynamic obstacles are avoided using RVO collision avoidance. The agent needs navigation data to work correctly. [NavigationAgent2D] is physics safe. - [b]Note:[/b] After [method set_target_location] is used it is required to use the [method get_next_location] function once every physics frame to update the internal path logic of the NavigationAgent. The returned vector position from this function should be used as the next movement position for the agent's parent Node. + [b]Note:[/b] After setting [member target_location] it is required to use the [method get_next_location] function once every physics frame to update the internal path logic of the NavigationAgent. The returned vector position from this function should be used as the next movement position for the agent's parent Node. </description> <tutorials> </tutorials> @@ -13,7 +13,7 @@ <method name="distance_to_target" qualifiers="const"> <return type="float" /> <description> - Returns the distance to the target location, using the agent's global position. The user must set the target location with [method set_target_location] in order for this to be accurate. + Returns the distance to the target location, using the agent's global position. The user must set [member target_location] in order for this to be accurate. </description> </method> <method name="get_final_location"> @@ -59,12 +59,6 @@ Returns the [RID] of this agent on the [NavigationServer2D]. </description> </method> - <method name="get_target_location" qualifiers="const"> - <return type="Vector2" /> - <description> - Returns the user defined [Vector2] after setting the target location. - </description> - </method> <method name="is_navigation_finished"> <return type="bool" /> <description> @@ -74,13 +68,13 @@ <method name="is_target_reachable"> <return type="bool" /> <description> - Returns true if the target location is reachable. The target location is set using [method set_target_location]. + Returns true if [member target_location] is reachable. </description> </method> <method name="is_target_reached" qualifiers="const"> <return type="bool" /> <description> - Returns true if the target location is reached. The target location is set using [method set_target_location]. It may not always be possible to reach the target location. It should always be possible to reach the final location though. See [method get_final_location]. + Returns true if [member target_location] is reached. It may not always be possible to reach the target location. It should always be possible to reach the final location though. See [method get_final_location]. </description> </method> <method name="set_navigation_layer_value"> @@ -98,13 +92,6 @@ Sets the [RID] of the navigation map this NavigationAgent node should use and also updates the [code]agent[/code] on the NavigationServer. </description> </method> - <method name="set_target_location"> - <return type="void" /> - <param index="0" name="location" type="Vector2" /> - <description> - Sets the user desired final location. This will clear the current navigation path. - </description> - </method> <method name="set_velocity"> <return type="void" /> <param index="0" name="velocity" type="Vector2" /> @@ -142,6 +129,9 @@ <member name="target_desired_distance" type="float" setter="set_target_desired_distance" getter="get_target_desired_distance" default="1.0"> The distance threshold before the final target point is considered to be reached. This will allow an agent to not have to hit the point of the final target exactly, but only the area. If this value is set to low the NavigationAgent will be stuck in a repath loop cause it will constantly overshoot or undershoot the distance to the final target point on each physics frame update. </member> + <member name="target_location" type="Vector2" setter="set_target_location" getter="get_target_location" default="Vector2(0, 0)"> + The user-defined target location. Setting this property will clear the current navigation path. + </member> <member name="time_horizon" type="float" setter="set_time_horizon" getter="get_time_horizon" default="20.0"> The minimal amount of time for which this agent's velocities, that are computed with the collision avoidance algorithm, are safe with respect to other agents. The larger the number, the sooner the agent will respond to other agents, but less freedom in choosing its velocities. Must be positive. </member> @@ -159,11 +149,11 @@ </signal> <signal name="target_reached"> <description> - Notifies when the player defined target, set with [method set_target_location], is reached. + Notifies when the player-defined [member target_location] is reached. </description> </signal> <signal name="velocity_computed"> - <param index="0" name="safe_velocity" type="Vector3" /> + <param index="0" name="safe_velocity" type="Vector2" /> <description> Notifies when the collision avoidance velocity is calculated. Emitted by [method set_velocity]. Only emitted when [member avoidance_enabled] is true. </description> diff --git a/doc/classes/NavigationAgent3D.xml b/doc/classes/NavigationAgent3D.xml index 3bb5b361ca..44c17647f7 100644 --- a/doc/classes/NavigationAgent3D.xml +++ b/doc/classes/NavigationAgent3D.xml @@ -5,7 +5,7 @@ </brief_description> <description> 3D Agent that is used in navigation to reach a location while avoiding static and dynamic obstacles. The dynamic obstacles are avoided using RVO collision avoidance. The agent needs navigation data to work correctly. [NavigationAgent3D] is physics safe. - [b]Note:[/b] After [method set_target_location] is used it is required to use the [method get_next_location] function once every physics frame to update the internal path logic of the NavigationAgent. The returned vector position from this function should be used as the next movement position for the agent's parent Node. + [b]Note:[/b] After setting [member target_location] it is required to use the [method get_next_location] function once every physics frame to update the internal path logic of the NavigationAgent. The returned vector position from this function should be used as the next movement position for the agent's parent Node. </description> <tutorials> </tutorials> @@ -13,7 +13,7 @@ <method name="distance_to_target" qualifiers="const"> <return type="float" /> <description> - Returns the distance to the target location, using the agent's global position. The user must set the target location with [method set_target_location] in order for this to be accurate. + Returns the distance to the target location, using the agent's global position. The user must set [member target_location] in order for this to be accurate. </description> </method> <method name="get_final_location"> @@ -59,12 +59,6 @@ Returns the [RID] of this agent on the [NavigationServer3D]. </description> </method> - <method name="get_target_location" qualifiers="const"> - <return type="Vector3" /> - <description> - Returns the user defined [Vector3] after setting the target location. - </description> - </method> <method name="is_navigation_finished"> <return type="bool" /> <description> @@ -74,13 +68,13 @@ <method name="is_target_reachable"> <return type="bool" /> <description> - Returns true if the target location is reachable. The target location is set using [method set_target_location]. + Returns true if [member target_location] is reachable. </description> </method> <method name="is_target_reached" qualifiers="const"> <return type="bool" /> <description> - Returns true if the target location is reached. The target location is set using [method set_target_location]. It may not always be possible to reach the target location. It should always be possible to reach the final location though. See [method get_final_location]. + Returns true if [member target_location] is reached. It may not always be possible to reach the target location. It should always be possible to reach the final location though. See [method get_final_location]. </description> </method> <method name="set_navigation_layer_value"> @@ -98,13 +92,6 @@ Sets the [RID] of the navigation map this NavigationAgent node should use and also updates the [code]agent[/code] on the NavigationServer. </description> </method> - <method name="set_target_location"> - <return type="void" /> - <param index="0" name="location" type="Vector3" /> - <description> - Sets the user desired final location. This will clear the current navigation path. - </description> - </method> <method name="set_velocity"> <return type="void" /> <param index="0" name="velocity" type="Vector3" /> @@ -148,6 +135,9 @@ <member name="target_desired_distance" type="float" setter="set_target_desired_distance" getter="get_target_desired_distance" default="1.0"> The distance threshold before the final target point is considered to be reached. This will allow an agent to not have to hit the point of the final target exactly, but only the area. If this value is set to low the NavigationAgent will be stuck in a repath loop cause it will constantly overshoot or undershoot the distance to the final target point on each physics frame update. </member> + <member name="target_location" type="Vector3" setter="set_target_location" getter="get_target_location" default="Vector3(0, 0, 0)"> + The user-defined target location. Setting this property will clear the current navigation path. + </member> <member name="time_horizon" type="float" setter="set_time_horizon" getter="get_time_horizon" default="5.0"> The minimal amount of time for which this agent's velocities, that are computed with the collision avoidance algorithm, are safe with respect to other agents. The larger the number, the sooner the agent will respond to other agents, but less freedom in choosing its velocities. Must be positive. </member> @@ -165,7 +155,7 @@ </signal> <signal name="target_reached"> <description> - Notifies when the player defined target, set with [method set_target_location], is reached. + Notifies when the player-defined [member target_location] is reached. </description> </signal> <signal name="velocity_computed"> diff --git a/doc/classes/Node.xml b/doc/classes/Node.xml index 620895d8d8..0368f29a13 100644 --- a/doc/classes/Node.xml +++ b/doc/classes/Node.xml @@ -39,7 +39,7 @@ <method name="_get_configuration_warnings" qualifiers="virtual const"> <return type="PackedStringArray" /> <description> - The elements in the array returned from this method are displayed as warnings in the Scene Dock if the script that overrides it is a [code]tool[/code] script. + The elements in the array returned from this method are displayed as warnings in the Scene dock if the script that overrides it is a [code]tool[/code] script. Returning an empty array produces no warnings. Call [method update_configuration_warnings] when the warnings need to be updated for this node. </description> @@ -535,7 +535,7 @@ [b]Note:[/b] Internal children can only be moved within their expected "internal range" (see [code]internal[/code] parameter in [method add_child]). </description> </method> - <method name="print_orphan_nodes"> + <method name="print_orphan_nodes" qualifiers="static"> <return type="void" /> <description> Prints all orphan nodes (nodes outside the [SceneTree]). Used for debugging. @@ -560,7 +560,7 @@ <method name="print_tree_pretty"> <return type="void" /> <description> - Similar to [method print_tree], this prints the tree to stdout. This version displays a more graphical representation similar to what is displayed in the scene inspector. It is useful for inspecting larger trees. + Similar to [method print_tree], this prints the tree to stdout. This version displays a more graphical representation similar to what is displayed in the Scene Dock. It is useful for inspecting larger trees. [b]Example output:[/b] [codeblock] ┖╴TheGame @@ -606,7 +606,7 @@ <return type="void" /> <param index="0" name="group" type="StringName" /> <description> - Removes a node from a group. See notes in the description, and the group methods in [SceneTree]. + Removes a node from the [param group]. Does nothing if the node is not in the [param group]. See notes in the description, and the group methods in [SceneTree]. </description> </method> <method name="replace_by"> @@ -630,7 +630,7 @@ <return type="int" enum="Error" /> <param index="0" name="method" type="StringName" /> <description> - Sends a remote procedure call request for the given [param method] to peers on the network (and locally), optionally sending all additional arguments as arguments to the method called by the RPC. The call request will only be received by nodes with the same [NodePath], including the exact same node name. Behaviour depends on the RPC configuration for the given method, see [method rpc_config]. Methods are not exposed to RPCs by default. Returns [code]null[/code]. + Sends a remote procedure call request for the given [param method] to peers on the network (and locally), optionally sending all additional arguments as arguments to the method called by the RPC. The call request will only be received by nodes with the same [NodePath], including the exact same node name. Behavior depends on the RPC configuration for the given method, see [method rpc_config]. Methods are not exposed to RPCs by default. Returns [code]null[/code]. [b]Note:[/b] You can only safely use RPCs on clients after you received the [code]connected_to_server[/code] signal from the [MultiplayerAPI]. You also need to keep track of the connection state, either by the [MultiplayerAPI] signals like [code]server_disconnected[/code] or by checking [code]get_multiplayer().peer.get_connection_status() == CONNECTION_CONNECTED[/code]. </description> </method> @@ -991,7 +991,7 @@ <constant name="DUPLICATE_SCRIPTS" value="4" enum="DuplicateFlags"> Duplicate the node's scripts. </constant> - <constant name="DUPLICATE_USE_INSTANCING" value="8" enum="DuplicateFlags"> + <constant name="DUPLICATE_USE_INSTANTIATION" value="8" enum="DuplicateFlags"> Duplicate using instancing. An instance stays linked to the original so when the original changes, the instance changes too. </constant> diff --git a/doc/classes/Node3D.xml b/doc/classes/Node3D.xml index 3df7ec931f..b6024b1887 100644 --- a/doc/classes/Node3D.xml +++ b/doc/classes/Node3D.xml @@ -290,12 +290,13 @@ <member name="rotation_edit_mode" type="int" setter="set_rotation_edit_mode" getter="get_rotation_edit_mode" enum="Node3D.RotationEditMode" default="0"> Specify how rotation (and scale) will be presented in the editor. </member> - <member name="rotation_order" type="int" setter="set_rotation_order" getter="get_rotation_order" enum="Node3D.RotationOrder" default="2"> + <member name="rotation_order" type="int" setter="set_rotation_order" getter="get_rotation_order" enum="EulerOrder" default="2"> Specify the axis rotation order of the [member rotation] property. The final orientation is constructed by rotating the Euler angles in the order specified by this property. </member> <member name="scale" type="Vector3" setter="set_scale" getter="get_scale" default="Vector3(1, 1, 1)"> Scale part of the local transformation. [b]Note:[/b] Mixed negative scales in 3D are not decomposable from the transformation matrix. Due to the way scale is represented with transformation matrices in Godot, the scale values will either be all positive or all negative. + [b]Note:[/b] Not all nodes are visually scaled by the [member scale] property. For example, [Light3D]s are not visually affected by [member scale]. </member> <member name="top_level" type="bool" setter="set_as_top_level" getter="is_set_as_top_level" default="false"> If [code]true[/code], the node will not inherit its transformations from its parent. Node transformations are only in global space. @@ -341,17 +342,5 @@ </constant> <constant name="ROTATION_EDIT_MODE_BASIS" value="2" enum="RotationEditMode"> </constant> - <constant name="ROTATION_ORDER_XYZ" value="0" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_XZY" value="1" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_YXZ" value="2" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_YZX" value="3" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_ZXY" value="4" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_ZYX" value="5" enum="RotationOrder"> - </constant> </constants> </class> diff --git a/doc/classes/NodePath.xml b/doc/classes/NodePath.xml index 022b4826ea..c82ed5f143 100644 --- a/doc/classes/NodePath.xml +++ b/doc/classes/NodePath.xml @@ -187,12 +187,14 @@ <return type="bool" /> <param index="0" name="right" type="NodePath" /> <description> + Returns [code]true[/code] if two node paths are not equal. </description> </operator> <operator name="operator =="> <return type="bool" /> <param index="0" name="right" type="NodePath" /> <description> + Returns [code]true[/code] if two node paths are equal, i.e. all node names in the path are the same and in the same order. </description> </operator> </operators> diff --git a/doc/classes/OS.xml b/doc/classes/OS.xml index 3aa26cbb21..610f77e3d8 100644 --- a/doc/classes/OS.xml +++ b/doc/classes/OS.xml @@ -4,7 +4,8 @@ Operating System functions. </brief_description> <description> - Operating System functions. OS wraps the most common functionality to communicate with the host operating system, such as the clipboard, video driver, delays, environment variables, execution of binaries, command line, etc. + Operating System functions. [OS] wraps the most common functionality to communicate with the host operating system, such as the clipboard, video driver, delays, environment variables, execution of binaries, command line, etc. + [b]Note:[/b] In Godot 4, [OS] functions related to window management were moved to the [DisplayServer] singleton. </description> <tutorials> <link title="OS Test Demo">https://godotengine.org/asset-library/asset/677</link> @@ -133,7 +134,7 @@ <method name="get_cache_dir" qualifiers="const"> <return type="String" /> <description> - Returns the [i]global[/i] cache data directory according to the operating system's standards. On desktop platforms, this path can be overridden by setting the [code]XDG_CACHE_HOME[/code] environment variable before starting the project. See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths in Godot projects[/url] in the documentation for more information. See also [method get_config_dir] and [method get_data_dir]. + Returns the [i]global[/i] cache data directory according to the operating system's standards. On the Linux/BSD platform, this path can be overridden by setting the [code]XDG_CACHE_HOME[/code] environment variable before starting the project. See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths in Godot projects[/url] in the documentation for more information. See also [method get_config_dir] and [method get_data_dir]. Not to be confused with [method get_user_data_dir], which returns the [i]project-specific[/i] user data path. </description> </method> @@ -181,17 +182,19 @@ <method name="get_cmdline_user_args"> <return type="PackedStringArray" /> <description> - Similar to [method get_cmdline_args], but this returns the user arguments (any argument passed after the double dash [code]--[/code] argument). These are left untouched by Godot for the user. + Similar to [method get_cmdline_args], but this returns the user arguments (any argument passed after the double dash [code]--[/code] or double plus [code]++[/code] argument). These are left untouched by Godot for the user. [code]++[/code] can be used in situations where [code]--[/code] is intercepted by another program (such as [code]startx[/code]). For example, in the command line below, [code]--fullscreen[/code] will not be returned in [method get_cmdline_user_args] and [code]--level 1[/code] will only be returned in [method get_cmdline_user_args]: [codeblock] godot --fullscreen -- --level 1 + # Or: + godot --fullscreen ++ --level 1 [/codeblock] </description> </method> <method name="get_config_dir" qualifiers="const"> <return type="String" /> <description> - Returns the [i]global[/i] user configuration directory according to the operating system's standards. On desktop platforms, this path can be overridden by setting the [code]XDG_CONFIG_HOME[/code] environment variable before starting the project. See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths in Godot projects[/url] in the documentation for more information. See also [method get_cache_dir] and [method get_data_dir]. + Returns the [i]global[/i] user configuration directory according to the operating system's standards. On the Linux/BSD platform, this path can be overridden by setting the [code]XDG_CONFIG_HOME[/code] environment variable before starting the project. See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths in Godot projects[/url] in the documentation for more information. See also [method get_cache_dir] and [method get_data_dir]. Not to be confused with [method get_user_data_dir], which returns the [i]project-specific[/i] user data path. </description> </method> @@ -199,14 +202,14 @@ <return type="PackedStringArray" /> <description> Returns an array of MIDI device names. - The returned array will be empty if the system MIDI driver has not previously been initialised with [method open_midi_inputs]. + The returned array will be empty if the system MIDI driver has not previously been initialized with [method open_midi_inputs]. [b]Note:[/b] This method is implemented on Linux, macOS and Windows. </description> </method> <method name="get_data_dir" qualifiers="const"> <return type="String" /> <description> - Returns the [i]global[/i] user data directory according to the operating system's standards. On desktop platforms, this path can be overridden by setting the [code]XDG_DATA_HOME[/code] environment variable before starting the project. See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths in Godot projects[/url] in the documentation for more information. See also [method get_cache_dir] and [method get_config_dir]. + Returns the [i]global[/i] user data directory according to the operating system's standards. On the Linux/BSD platform, this path can be overridden by setting the [code]XDG_DATA_HOME[/code] environment variable before starting the project. See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths in Godot projects[/url] in the documentation for more information. See also [method get_cache_dir] and [method get_config_dir]. Not to be confused with [method get_user_data_dir], which returns the [i]project-specific[/i] user data path. </description> </method> @@ -451,7 +454,7 @@ Returns the video adapter driver name and version for the user's currently active graphics card. The first element holds the driver name, such as [code]nvidia[/code], [code]amdgpu[/code], etc. The second element holds the driver version. For e.g. the [code]nvidia[/code] driver on a Linux/BSD platform, the version is in the format [code]510.85.02[/code]. For Windows, the driver's format is [code]31.0.15.1659[/code]. - [b]Note:[/b] This method is only supported on the platforms Linux/BSD and Windows. It returns an empty array on other platforms. + [b]Note:[/b] This method is only supported on the platforms Linux/BSD and Windows when not running in headless mode. It returns an empty array on other platforms. </description> </method> <method name="has_environment" qualifiers="const"> @@ -466,7 +469,7 @@ <return type="bool" /> <param index="0" name="tag_name" type="String" /> <description> - Returns [code]true[/code] if the feature for the given feature tag is supported in the currently running instance, depending on the platform, build, etc. Can be used to check whether you're currently running a debug build, on a certain platform or arch, etc. Refer to the [url=$DOCS_URL/getting_started/workflow/export/feature_tags.html]Feature Tags[/url] documentation for more details. + Returns [code]true[/code] if the feature for the given feature tag is supported in the currently running instance, depending on the platform, build, etc. Can be used to check whether you're currently running a debug build, on a certain platform or arch, etc. Refer to the [url=$DOCS_URL/tutorials/export/feature_tags.html]Feature Tags[/url] documentation for more details. [b]Note:[/b] Tag names are case-sensitive. </description> </method> diff --git a/doc/classes/Object.xml b/doc/classes/Object.xml index e663f47ddf..bf15f96291 100644 --- a/doc/classes/Object.xml +++ b/doc/classes/Object.xml @@ -1,33 +1,27 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="Object" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> - Base class for all non-built-in types. + Base class for all other classes in the engine. </brief_description> <description> - Every class which is not a built-in type inherits from this class. - You can construct Objects from scripting languages, using [code]Object.new()[/code] in GDScript, or [code]new Object[/code] in C#. - Objects do not manage memory. If a class inherits from Object, you will have to delete instances of it manually. To do so, call the [method free] method from your script or delete the instance from C++. - Some classes that extend Object add memory management. This is the case of [RefCounted], which counts references and deletes itself automatically when no longer referenced. [Node], another fundamental type, deletes all its children when freed from memory. - Objects export properties, which are mainly useful for storage and editing, but not really so much in programming. Properties are exported in [method _get_property_list] and handled in [method _get] and [method _set]. However, scripting languages and C++ have simpler means to export them. - Property membership can be tested directly in GDScript using [code]in[/code]: - [codeblocks] - [gdscript] - var n = Node2D.new() - print("position" in n) # Prints "true". - print("other_property" in n) # Prints "false". - [/gdscript] - [csharp] - var node = new Node2D(); - // C# has no direct equivalent to GDScript's `in` operator here, but we - // can achieve the same behavior by performing `Get` with a null check. - GD.Print(node.Get("position") != null); // Prints "true". - GD.Print(node.Get("other_property") != null); // Prints "false". - [/csharp] - [/codeblocks] - The [code]in[/code] operator will evaluate to [code]true[/code] as long as the key exists, even if the value is [code]null[/code]. - Objects also receive notifications. Notifications are a simple way to notify the object about different events, so they can all be handled together. See [method _notification]. - [b]Note:[/b] Unlike references to a [RefCounted], references to an Object stored in a variable can become invalid without warning. Therefore, it's recommended to use [RefCounted] for data classes instead of [Object]. - [b]Note:[/b] The [code]script[/code] property is not exposed like most properties, but it does have a setter and getter ([code]set_script()[/code] and [code]get_script()[/code]). + An advanced [Variant] type. All classes in the engine inherit from Object. Each class may define new properties, methods or signals, which are available to all inheriting classes. For example, a [Sprite2D] instance is able to call [method Node.add_child] because it inherits from [Node]. + You can create new instances, using [code]Object.new()[/code] in GDScript, or [code]new Object[/code] in C#. + To delete an Object instance, call [method free]. This is necessary for most classes inheriting Object, because they do not manage memory on their own, and will otherwise cause memory leaks when no longer in use. There are a few classes that perform memory management. For example, [RefCounted] (and by extension [Resource]) deletes itself when no longer referenced, and [Node] deletes its children when freed. + Objects can have a [Script] attached to them. Once the [Script] is instantiated, it effectively acts as an extension to the base class, allowing it to define and inherit new properties, methods and signals. + Inside a [Script], [method _get_property_list] may be overriden to customize properties in several ways. This allows them to be available to the editor, display as lists of options, sub-divide into groups, save on disk, etc. Scripting languages offer easier ways to customize properties, such as with the [annotation @GDScript.@export] annotation. + Godot is very dynamic. An object's script, and therefore its properties, methods and signals, can be changed at run-time. Because of this, there can be occasions where, for example, a property required by a method may not exist. To prevent run-time errors, see methods such as [method set], [method get], [method call], [method has_method], [method has_signal], etc. Note that these methods are [b]much[/b] slower than direct references. + In GDScript, you can also check if a given property, method, or signal name exists in an object with the [code]in[/code] operator: + [codeblock] + var node = Node.new() + print("name" in node) # Prints true + print("get_parent" in node) # Prints true + print("tree_entered" in node) # Prints true + print("unknown" in node) # Prints false + [/codeblock] + Notifications are [int] constants commonly sent and received by objects. For example, on every rendered frame, the [SceneTree] notifies nodes inside the tree with a [constant Node.NOTIFICATION_PROCESS]. The nodes receive it and may call [method Node._process] to update. To make use of notifications, see [method notification] and [method _notification]. + Lastly, every object can also contain metadata (data about data). [method set_meta] can be useful to store information that the object itself does not depend on. To keep your code clean, making excessive use of metadata is discouraged. + [b]Note:[/b] Unlike references to a [RefCounted], references to an object stored in a variable can become invalid without being set to [code]null[/code]. To check if an object has been deleted, do [i]not[/i] compare it against [code]null[/code]. Instead, use [method @GlobalScope.is_instance_valid]. It's also recommended to inherit from [RefCounted] for classes storing data instead of [Object]. + [b]Note:[/b] The [code]script[/code] is not exposed like most properties. To set or get an object's [Script] in code, use [method set_script] and [method get_script], respectively. </description> <tutorials> <link title="When and how to avoid using nodes for everything">$DOCS_URL/tutorials/best_practices/node_alternatives.html</link> @@ -38,46 +32,174 @@ <return type="Variant" /> <param index="0" name="property" type="StringName" /> <description> - Virtual method which can be overridden to customize the return value of [method get]. - Returns the given property. Returns [code]null[/code] if the [param property] does not exist. + Override this method to customize the behavior of [method get]. Should return the given [param property]'s value, or [code]null[/code] if the [param property] should be handled normally. + Combined with [method _set] and [method _get_property_list], this method allows defining custom properties, which is particularly useful for editor plugins. Note that a property must be present in [method get_property_list], otherwise this method will not be called. + [codeblocks] + [gdscript] + func _get(property): + if (property == "fake_property"): + print("Getting my property!") + return 4 + + func _get_property_list(): + return [ + { "name": "fake_property", "type": TYPE_INT } + ] + [/gdscript] + [csharp] + public override Variant _Get(StringName property) + { + if (property == "FakeProperty") + { + GD.Print("Getting my property!"); + return 4; + } + return default; + } + + public override Godot.Collections.Array<Godot.Collections.Dictionary> _GetPropertyList() + { + return new Godot.Collections.Array<Godot.Collections.Dictionary>() + { + new Godot.Collections.Dictionary() + { + { "name", "FakeProperty" }, + { "type", (int)Variant.Type.Int } + } + }; + } + [/csharp] + [/codeblocks] </description> </method> <method name="_get_property_list" qualifiers="virtual"> <return type="Dictionary[]" /> <description> - Virtual method which can be overridden to customize the return value of [method get_property_list]. - Returns the object's property list as an [Array] of dictionaries. - Each property's [Dictionary] must contain at least [code]name: String[/code] and [code]type: int[/code] (see [enum Variant.Type]) entries. Optionally, it can also include [code]hint: int[/code] (see [enum PropertyHint]), [code]hint_string: String[/code], and [code]usage: int[/code] (see [enum PropertyUsageFlags]). + Override this method to customize how script properties should be handled by the engine. + Should return a property list, as an [Array] of dictionaries. The result is added to the array of [method get_property_list], and should be formatted in the same way. Each [Dictionary] must at least contain the [code]name[/code] and [code]type[/code] entries. + The example below displays [code]hammer_type[/code] in the Inspector dock, only if [code]holding_hammer[/code] is [code]true[/code]: + [codeblocks] + [gdscript] + @tool + extends Node2D + + @export var holding_hammer = false: + set(value): + holding_hammer = value + notify_property_list_changed() + var hammer_type = 0 + + func _get_property_list(): + # By default, `hammer_type` is not visible in the editor. + var property_usage = PROPERTY_USAGE_NO_EDITOR + + if holding_hammer: + property_usage = PROPERTY_USAGE_DEFAULT + + var properties = [] + properties.append({ + "name": "hammer_type", + "type": TYPE_INT, + "usage": property_usage, # See above assignment. + "hint": PROPERTY_HINT_ENUM, + "hint_string": "Wooden,Iron,Golden,Enchanted" + }) + + return properties + [/gdscript] + [csharp] + [Tool] + public class MyNode2D : Node2D + { + private bool _holdingHammer; + + [Export] + public bool HoldingHammer + { + get => _holdingHammer; + set + { + _holdingHammer = value; + NotifyPropertyListChanged(); + } + } + + public int HammerType { get; set; } + + public override Godot.Collections.Array<Godot.Collections.Dictionary> _GetPropertyList() + { + // By default, `HammerType` is not visible in the editor. + var propertyUsage = PropertyUsageFlags.NoEditor; + + if (HoldingHammer) + { + propertyUsage = PropertyUsageFlags.Default; + } + + var properties = new Godot.Collections.Array<Godot.Collections.Dictionary>(); + properties.Add(new Godot.Collections.Dictionary() + { + { "name", "HammerType" }, + { "type", (int)Variant.Type.Int }, + { "usage", (int)propertyUsage }, // See above assignment. + { "hint", (int)PropertyHint.Enum }, + { "hint_string", "Wooden,Iron,Golden,Enchanted" } + }); + + return properties; + } + } + [/csharp] + [/codeblocks] + [b]Note:[/b] This method is intended for advanced purposes. For most common use cases, the scripting languages offer easier ways to handle properties. See [annotation @GDScript.@export], [annotation @GDScript.@export_enum], [annotation @GDScript.@export_group], etc. + [b]Note:[/b] If the object's script is not [annotation @GDScript.@tool], this method will not be called in the editor. </description> </method> <method name="_init" qualifiers="virtual"> <return type="void" /> <description> - Called when the object is initialized in memory. Can be defined to take in parameters, that are passed in when constructing. - [b]Note:[/b] If [method _init] is defined with required parameters, then explicit construction is the only valid means of creating an Object of the class. If any other means (such as [method PackedScene.instantiate]) is used, then initialization will fail. + Called when the object's script is instantiated, oftentimes after the object is initialized in memory (through [code]Object.new()[/code] in GDScript, or [code]new Object[/code] in C#). It can be also defined to take in parameters. This method is similar to a constructor in most programming languages. + [b]Note:[/b] If [method _init] is defined with [i]required[/i] parameters, the Object with script may only be created directly. If any other means (such as [method PackedScene.instantiate] or [method Node.duplicate]) are used, the script's initialization will fail. </description> </method> <method name="_notification" qualifiers="virtual"> <return type="void" /> <param index="0" name="what" type="int" /> <description> - Called whenever the object receives a notification, which is identified in [param what] by a constant. The base [Object] has two constants [constant NOTIFICATION_POSTINITIALIZE] and [constant NOTIFICATION_PREDELETE], but subclasses such as [Node] define a lot more notifications which are also received by this method. + Called when the object receives a notification, which can be identified in [param what] by comparing it with a constant. See also [method notification]. + [codeblocks] + [gdscript] + func _notification(what): + if what == NOTIFICATION_PREDELETE: + print("Goodbye!") + [/gdscript] + [csharp] + public override void _Notification(long what) + { + if (what == NotificationPredelete) + { + GD.Print("Goodbye!"); + } + } + [/csharp] + [/codeblocks] + [b]Note:[/b] The base [Object] defines a few notifications ([constant NOTIFICATION_POSTINITIALIZE] and [constant NOTIFICATION_PREDELETE]). Inheriting classes such as [Node] define a lot more notifications, which are also received by this method. </description> </method> <method name="_property_can_revert" qualifiers="virtual"> <return type="bool" /> <param index="0" name="property" type="StringName" /> <description> - Virtual methods that can be overridden to customize the property revert behavior in the editor. - Returns [code]true[/code] if the property identified by [code]name[/code] can be reverted to a default value. Override [method _property_get_revert] to return the actual value. + Override this method to customize the given [param property]'s revert behavior. Should return [code]true[/code] if the [param property] can be reverted in the Inspector dock. Use [method _property_get_revert] to specify the [param property]'s default value. + [b]Note:[/b] This method must return consistently, regardless of the current value of the [param property]. </description> </method> <method name="_property_get_revert" qualifiers="virtual"> <return type="Variant" /> <param index="0" name="property" type="StringName" /> <description> - Virtual methods that can be overridden to customize the property revert behavior in the editor. - Returns the default value of the property identified by [code]name[/code]. [method _property_can_revert] must be overridden as well for this method to be called. + Override this method to customize the given [param property]'s revert behavior. Should return the default value for the [param property]. If the default value differs from the [param property]'s current value, a revert icon is displayed in the Inspector dock. + [b]Note:[/b] [method _property_can_revert] must also be overridden for this method to be called. </description> </method> <method name="_set" qualifiers="virtual"> @@ -85,15 +207,58 @@ <param index="0" name="property" type="StringName" /> <param index="1" name="value" type="Variant" /> <description> - Virtual method which can be overridden to customize the return value of [method set]. - Sets a property. Returns [code]true[/code] if the [param property] exists. + Override this method to customize the behavior of [method set]. Should set the [param property] to [param value] and return [code]true[/code], or [code]false[/code] if the [param property] should be handled normally. The [i]exact[/i] way to set the [param property] is up to this method's implementation. + Combined with [method _get] and [method _get_property_list], this method allows defining custom properties, which is particularly useful for editor plugins. Note that a property [i]must[/i] be present in [method get_property_list], otherwise this method will not be called. + [codeblocks] + [gdscript] + func _set(property, value): + if (property == "fake_property"): + print("Setting my property to ", value) + + func _get_property_list(): + return [ + { "name": "fake_property", "type": TYPE_INT } + ] + [/gdscript] + [csharp] + public override void _Set(StringName property, Variant value) + { + if (property == "FakeProperty") + { + GD.Print($"Setting my property to {value}"); + return true; + } + + return false; + } + + public override Godot.Collections.Array<Godot.Collections.Dictionary> _GetPropertyList() + { + return new Godot.Collections.Array<Godot.Collections.Dictionary>() + { + new Godot.Collections.Dictionary() + { + { "name", "FakeProperty" }, + { "type", (int)Variant.Type.Int } + } + }; + } + [/csharp] + [/codeblocks] </description> </method> <method name="_to_string" qualifiers="virtual"> <return type="String" /> <description> - Virtual method which can be overridden to customize the return value of [method to_string], and thus the object's representation where it is converted to a string, e.g. with [code]print(obj)[/code]. - Returns a [String] representing the object. If not overridden, defaults to [code]"[ClassName:RID]"[/code]. + Override this method to customize the return value of [method to_string], and therefore the object's representation as a [String]. + [codeblock] + func _to_string(): + return "Welcome to Godot 4!" + + func _init(): + print(self) # Prints Welcome to Godot 4!" + var a = str(self) # a is "Welcome to Godot 4!" + [/codeblock] </description> </method> <method name="add_user_signal"> @@ -101,14 +266,37 @@ <param index="0" name="signal" type="String" /> <param index="1" name="arguments" type="Array" default="[]" /> <description> - Adds a user-defined [param signal]. Arguments are optional, but can be added as an [Array] of dictionaries, each containing [code]name: String[/code] and [code]type: int[/code] (see [enum Variant.Type]) entries. + Adds a user-defined [param signal]. Optional arguments for the signal can be added as an [Array] of dictionaries, each defining a [code]name[/code] [String] and a [code]type[/code] [int] (see [enum Variant.Type]). See also [method has_user_signal]. + [codeblocks] + [gdscript] + add_user_signal("hurt", [ + { "name": "damage", "type": TYPE_INT }, + { "name": "source", "type": TYPE_OBJECT } + ]) + [/gdscript] + [csharp] + AddUserSignal("Hurt", new Godot.Collections.Array() + { + new Godot.Collections.Dictionary() + { + { "name", "damage" }, + { "type", (int)Variant.Type.Int } + }, + new Godot.Collections.Dictionary() + { + { "name", "source" }, + { "type", (int)Variant.Type.Object } + } + }); + [/csharp] + [/codeblocks] </description> </method> <method name="call" qualifiers="vararg"> <return type="Variant" /> <param index="0" name="method" type="StringName" /> <description> - Calls the [param method] on the object and returns the result. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example: + Calls the [param method] on the object and returns the result. This method supports a variable number of arguments, so parameters can be passed as a comma separated list. [codeblocks] [gdscript] var node = Node3D.new() @@ -119,14 +307,14 @@ node.Call("rotate", new Vector3(1f, 0f, 0f), 1.571f); [/csharp] [/codeblocks] - [b]Note:[/b] In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase). + [b]Note:[/b] In C#, [param method] must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in the [code]MethodName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="call_deferred" qualifiers="vararg"> <return type="Variant" /> <param index="0" name="method" type="StringName" /> <description> - Calls the [param method] on the object during idle time. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example: + Calls the [param method] on the object during idle time. This method supports a variable number of arguments, so parameters can be passed as a comma separated list. [codeblocks] [gdscript] var node = Node3D.new() @@ -137,7 +325,7 @@ node.CallDeferred("rotate", new Vector3(1f, 0f, 0f), 1.571f); [/csharp] [/codeblocks] - [b]Note:[/b] In C#, the method name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined methods where you should use the same convention as in the C# source (typically PascalCase). + [b]Note:[/b] In C#, [param method] must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in the [code]MethodName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="callv"> @@ -145,7 +333,7 @@ <param index="0" name="method" type="StringName" /> <param index="1" name="arg_array" type="Array" /> <description> - Calls the [param method] on the object and returns the result. Contrarily to [method call], this method does not support a variable number of arguments but expects all parameters to be via a single [Array]. + Calls the [param method] on the object and returns the result. Unlike [method call], this method expects all parameters to be contained inside [param arg_array]. [codeblocks] [gdscript] var node = Node3D.new() @@ -156,12 +344,13 @@ node.Callv("rotate", new Godot.Collections.Array { new Vector3(1f, 0f, 0f), 1.571f }); [/csharp] [/codeblocks] + [b]Note:[/b] In C#, [param method] must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in the [code]MethodName[/code] class to avoid allocating a new [StringName] on each call </description> </method> <method name="can_translate_messages" qualifiers="const"> <return type="bool" /> <description> - Returns [code]true[/code] if the object can translate strings. See [method set_message_translation] and [method tr]. + Returns [code]true[/code] if the object is allowed to translate messages with [method tr] and [method tr_n]. See also [method set_message_translation]. </description> </method> <method name="connect"> @@ -170,23 +359,23 @@ <param index="1" name="callable" type="Callable" /> <param index="2" name="flags" type="int" default="0" /> <description> - Connects a [param signal] to a [param callable]. Use [param flags] to set deferred or one-shot connections. See [enum ConnectFlags] constants. - A signal can only be connected once to a [Callable]. It will print an error if already connected, unless the signal was connected with [constant CONNECT_REFERENCE_COUNTED]. To avoid this, first, use [method is_connected] to check for existing connections. - If the callable's target is destroyed in the game's lifecycle, the connection will be lost. + Connects a [param signal] by name to a [param callable]. Optional [param flags] can be also added to configure the connection's behavior (see [enum ConnectFlags] constants). + A signal can only be connected once to the same [Callable]. If the signal is already connected, this method returns [constant ERR_INVALID_PARAMETER] and pushes an error message, unless the signal is connected with [constant CONNECT_REFERENCE_COUNTED]. To prevent this, use [method is_connected] first to check for existing connections. + If the [param callable]'s object is freed, the connection will be lost. [b]Examples with recommended syntax:[/b] - Connecting signals is one of the most common operations in Godot and the API gives many options to do so, which are described further down. The code block below shows the recommended approach for both GDScript and C#. + Connecting signals is one of the most common operations in Godot and the API gives many options to do so, which are described further down. The code block below shows the recommended approach. [codeblocks] [gdscript] func _ready(): var button = Button.new() - # `button_down` here is a Signal object, and we thus call the Signal.connect() method, - # not Object.connect(). See discussion below for a more in-depth overview of the API. + # `button_down` here is a Signal variant type, and we thus call the Signal.connect() method, not Object.connect(). + # See discussion below for a more in-depth overview of the API. button.button_down.connect(_on_button_down) - # This assumes that a `Player` class exists which defines a `hit` signal. + # This assumes that a `Player` class exists, which defines a `hit` signal. var player = Player.new() - # We use Signal.connect() again, and we also use the Callable.bind() method which - # returns a new Callable with the parameter binds. + # We use Signal.connect() again, and we also use the Callable.bind() method, + # which returns a new Callable with the parameter binds. player.hit.connect(_on_player_hit.bind("sword", 100)) func _on_button_down(): @@ -202,7 +391,7 @@ // C# supports passing signals as events, so we can use this idiomatic construct: button.ButtonDown += OnButtonDown; - // This assumes that a `Player` class exists which defines a `Hit` signal. + // This assumes that a `Player` class exists, which defines a `Hit` signal. var player = new Player(); // Signals as events (`player.Hit += OnPlayerHit;`) do not support argument binding. You have to use: player.Hit.Connect(OnPlayerHit, new Godot.Collections.Array {"sword", 100 }); @@ -259,44 +448,41 @@ } [/csharp] [/codeblocks] - While all options have the same outcome ([code]button[/code]'s [signal BaseButton.button_down] signal will be connected to [code]_on_button_down[/code]), option 3 offers the best validation: it will print a compile-time error if either the [code]button_down[/code] signal or the [code]_on_button_down[/code] callable are undefined. On the other hand, option 2 only relies on string names and will only be able to validate either names at runtime: it will print a runtime error if [code]"button_down"[/code] doesn't correspond to a signal, or if [code]"_on_button_down"[/code] is not a registered method in the object [code]self[/code]. The main reason for using options 1, 2, or 4 would be if you actually need to use strings (e.g. to connect signals programmatically based on strings read from a configuration file). Otherwise, option 3 is the recommended (and fastest) method. - [b]Parameter bindings and passing:[/b] - For legacy or language-specific reasons, there are also several ways to bind parameters to signals. One can pass a [code]binds[/code] [Array] to [method Object.connect] or [method Signal.connect], or use the recommended [method Callable.bind] method to create a new callable from an existing one, with the given parameter binds. - One can also pass additional parameters when emitting the signal with [method emit_signal]. The examples below show the relationship between those two types of parameters. + While all options have the same outcome ([code]button[/code]'s [signal BaseButton.button_down] signal will be connected to [code]_on_button_down[/code]), [b]option 3[/b] offers the best validation: it will print a compile-time error if either the [code]button_down[/code] [Signal] or the [code]_on_button_down[/code] [Callable] are not defined. On the other hand, [b]option 2[/b] only relies on string names and will only be able to validate either names at runtime: it will print a runtime error if [code]"button_down"[/code] doesn't correspond to a signal, or if [code]"_on_button_down"[/code] is not a registered method in the object [code]self[/code]. The main reason for using options 1, 2, or 4 would be if you actually need to use strings (e.g. to connect signals programmatically based on strings read from a configuration file). Otherwise, option 3 is the recommended (and fastest) method. + [b]Binding and passing parameters:[/b] + The syntax to bind parameters is through [method Callable.bind], which returns a copy of the [Callable] with its parameters bound. + When calling [method emit_signal], the signal parameters can be also passed. The examples below show the relationship between these signal parameters and bound parameters. [codeblocks] [gdscript] func _ready(): - # This assumes that a `Player` class exists which defines a `hit` signal. + # This assumes that a `Player` class exists, which defines a `hit` signal. var player = Player.new() - # Option 1: Using Callable.bind(). player.hit.connect(_on_player_hit.bind("sword", 100)) - # Option 2: Using a `binds` Array in Signal.connect() (same syntax for Object.connect()). - player.hit.connect(_on_player_hit, ["sword", 100]) # Parameters added when emitting the signal are passed first. player.emit_signal("hit", "Dark lord", 5) - # Four arguments, since we pass two when emitting (hit_by, level) - # and two when connecting (weapon_type, damage). + # We pass two arguments when emitting (`hit_by`, `level`), + # and bind two more arguments when connecting (`weapon_type`, `damage`). func _on_player_hit(hit_by, level, weapon_type, damage): print("Hit by %s (level %d) with weapon %s for %d damage." % [hit_by, level, weapon_type, damage]) [/gdscript] [csharp] public override void _Ready() { - // This assumes that a `Player` class exists which defines a `Hit` signal. + // This assumes that a `Player` class exists, which defines a `Hit` signal. var player = new Player(); // Option 1: Using Callable.Bind(). This way we can still use signals as events. player.Hit += OnPlayerHit.Bind("sword", 100); - // Option 2: Using a `binds` Array in Signal.Connect() (same syntax for Object.Connect()). + // Option 2: Using a `binds` Array in Signal.Connect(). player.Hit.Connect(OnPlayerHit, new Godot.Collections.Array{ "sword", 100 }); // Parameters added when emitting the signal are passed first. player.EmitSignal("hit", "Dark lord", 5); } - // Four arguments, since we pass two when emitting (hitBy, level) - // and two when connecting (weaponType, damage). + // We pass two arguments when emitting (`hit_by`, `level`), + // and bind two more arguments when connecting (`weapon_type`, `damage`). private void OnPlayerHit(string hitBy, int level, string weaponType, int damage) { GD.Print(String.Format("Hit by {0} (level {1}) with weapon {2} for {3} damage.", hitBy, level, weaponType, damage)); @@ -310,71 +496,98 @@ <param index="0" name="signal" type="StringName" /> <param index="1" name="callable" type="Callable" /> <description> - Disconnects a [param signal] from a given [param callable]. - If you try to disconnect a connection that does not exist, the method will print an error. Use [method is_connected] to ensure that the connection exists. + Disconnects a [param signal] by name from a given [param callable]. If the connection does not exist, generates an error. Use [method is_connected] to make sure that the connection exists. </description> </method> <method name="emit_signal" qualifiers="vararg"> <return type="int" enum="Error" /> <param index="0" name="signal" type="StringName" /> <description> - Emits the given [param signal]. The signal must exist, so it should be a built-in signal of this class or one of its parent classes, or a user-defined signal. This method supports a variable number of arguments, so parameters are passed as a comma separated list. Example: + Emits the given [param signal] by name. The signal must exist, so it should be a built-in signal of this class or one of its inherited classes, or a user-defined signal (see [method add_user_signal]). This method supports a variable number of arguments, so parameters can be passed as a comma separated list. + Returns [constant ERR_UNAVAILABLE] if [param signal] does not exist or the parameters are invalid. [codeblocks] [gdscript] emit_signal("hit", "sword", 100) emit_signal("game_over") [/gdscript] [csharp] - EmitSignal("hit", "sword", 100); - EmitSignal("game_over"); + EmitSignal("Hit", "sword", 100); + EmitSignal("GameOver"); [/csharp] [/codeblocks] + [b]Note:[/b] In C#, [param signal] must be in snake_case when referring to built-in Godot signals. Prefer using the names exposed in the [code]SignalName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="free"> <return type="void" /> <description> - Deletes the object from memory. Any pre-existing reference to the freed object will become invalid, e.g. [code]is_instance_valid(object)[/code] will return [code]false[/code]. + Deletes the object from memory. Pre-existing references to the object become invalid, and any attempt to access them will result in a run-time error. Checking the references with [method @GlobalScope.is_instance_valid] will return [code]false[/code]. </description> </method> <method name="get" qualifiers="const"> <return type="Variant" /> <param index="0" name="property" type="StringName" /> <description> - Returns the [Variant] value of the given [param property]. If the [param property] doesn't exist, this will return [code]null[/code]. - [b]Note:[/b] In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase). + Returns the [Variant] value of the given [param property]. If the [param property] does not exist, this method returns [code]null[/code]. + [codeblocks] + [gdscript] + var node = Node2D.new() + node.rotation = 1.5 + var a = node.get("rotation") # a is 1.5 + [/gdscript] + [csharp] + var node = new Node2D(); + node.Rotation = 1.5f; + var a = node.Get("rotation"); // a is 1.5 + [/csharp] + [/codeblocks] + [b]Note:[/b] In C#, [param property] must be in snake_case when referring to built-in Godot properties. Prefer using the names exposed in the [code]PropertyName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="get_class" qualifiers="const"> <return type="String" /> <description> - Returns the object's class as a [String]. See also [method is_class]. - [b]Note:[/b] [method get_class] does not take [code]class_name[/code] declarations into account. If the object has a [code]class_name[/code] defined, the base class name will be returned instead. + Returns the object's built-in class name, as a [String]. See also [method is_class]. + [b]Note:[/b] This method ignores [code]class_name[/code] declarations. If this object's script has defined a [code]class_name[/code], the base, built-in class name is returned instead. </description> </method> <method name="get_incoming_connections" qualifiers="const"> <return type="Dictionary[]" /> <description> - Returns an [Array] of dictionaries with information about signals that are connected to the object. - Each [Dictionary] contains three String entries: - - [code]source[/code] is a reference to the signal emitter. - - [code]signal_name[/code] is the name of the connected signal. - - [code]method_name[/code] is the name of the method to which the signal is connected. + Returns an [Array] of signal connections received by this object. Each connection is represented as a [Dictionary] that contains three entries: + - [code]signal[/code] is a reference to the [Signal]; + - [code]callable[/code] is a reference to the [Callable]; + - [code]flags[/code] is a combination of [enum ConnectFlags]. </description> </method> <method name="get_indexed" qualifiers="const"> <return type="Variant" /> <param index="0" name="property_path" type="NodePath" /> <description> - Gets the object's property indexed by the given [param property_path]. The path should be a [NodePath] relative to the current object and can use the colon character ([code]:[/code]) to access nested properties. Examples: [code]"position:x"[/code] or [code]"material:next_pass:blend_mode"[/code]. - [b]Note:[/b] Even though the method takes [NodePath] argument, it doesn't support actual paths to [Node]s in the scene tree, only colon-separated sub-property paths. For the purpose of nodes, use [method Node.get_node_and_resource] instead. + Gets the object's property indexed by the given [param property_path]. The path should be a [NodePath] relative to the current object and can use the colon character ([code]:[/code]) to access nested properties. + [b]Examples:[/b] [code]"position:x"[/code] or [code]"material:next_pass:blend_mode"[/code]. + [codeblocks] + [gdscript] + var node = Node2D.new() + node.position = Vector2(5, -10) + var a = node.get_indexed("position") # a is Vector2(5, -10) + var b = node.get_indexed("position:y") # b is -10 + [/gdscript] + [csharp] + var node = new Node2D(); + node.Position = new Vector2(5, -10); + var a = node.GetIndexed("position"); // a is Vector2(5, -10) + var b = node.GetIndexed("position:y"); // b is -10 + [/csharp] + [/codeblocks] + [b]Note:[/b] In C#, [param property_path] must be in snake_case when referring to built-in Godot properties. + [b]Note:[/b] This method does not support actual paths to nodes in the [SceneTree], only sub-property paths. In the context of nodes, use [method Node.get_node_and_resource] instead. </description> </method> <method name="get_instance_id" qualifiers="const"> <return type="int" /> <description> - Returns the object's unique instance ID. - This ID can be saved in [EncodedObjectAsID], and can be used to retrieve the object instance with [method @GlobalScope.instance_from_id]. + Returns the object's unique instance ID. This ID can be saved in [EncodedObjectAsID], and can be used to retrieve this object instance with [method @GlobalScope.instance_from_id]. </description> </method> <method name="get_meta" qualifiers="const"> @@ -382,47 +595,62 @@ <param index="0" name="name" type="StringName" /> <param index="1" name="default" type="Variant" default="null" /> <description> - Returns the object's metadata entry for the given [param name]. - Throws error if the entry does not exist, unless [param default] is not [code]null[/code] (in which case the default value will be returned). See also [method has_meta], [method set_meta] and [method remove_meta]. - [b]Note:[/b] Metadata that has a [param name] starting with an underscore ([code]_[/code]) is considered editor-only. Editor-only metadata is not displayed in the inspector and should not be edited. + Returns the object's metadata value for the given entry [param name]. If the entry does not exist, returns [param default]. If [param default] is [code]null[/code], an error is also generated. + [b]Note:[/b] Metadata that has a [param name] starting with an underscore ([code]_[/code]) is considered editor-only. Editor-only metadata is not displayed in the Inspector dock and should not be edited. </description> </method> <method name="get_meta_list" qualifiers="const"> <return type="PackedStringArray" /> <description> - Returns the object's metadata as a [PackedStringArray]. + Returns the object's metadata entry names as a [PackedStringArray]. </description> </method> <method name="get_method_list" qualifiers="const"> <return type="Dictionary[]" /> <description> - Returns the object's methods and their signatures as an [Array]. + Returns this object's methods and their signatures as an [Array] of dictionaries. Each [Dictionary] contains the following entries: + - [code]name[/code] is the name of the method, as a [String]; + - [code]args[/code] is an [Array] of dictionaries representing the arguments; + - [code]default_args[/code] is the default arguments as an [Array] of variants; + - [code]flags[/code] is a combination of [enum MethodFlags]; + - [code]id[/code] is the method's internal identifier [int]; + - [code]return[/code] is the returned value, as a [Dictionary]; + [b]Note:[/b] The dictionaries of [code]args[/code] and [code]return[/code] are formatted identically to the results of [method get_property_list], although not all entries are used. </description> </method> <method name="get_property_list" qualifiers="const"> <return type="Dictionary[]" /> <description> - Returns the object's property list as an [Array] of dictionaries. - Each property's [Dictionary] contain at least [code]name: String[/code] and [code]type: int[/code] (see [enum Variant.Type]) entries. Optionally, it can also include [code]hint: int[/code] (see [enum PropertyHint]), [code]hint_string: String[/code], and [code]usage: int[/code] (see [enum PropertyUsageFlags]). + Returns the object's property list as an [Array] of dictionaries. Each [Dictionary] contains the following entries: + - [code]name[/code] is the property's name, as a [String]; + - [code]class_name[/code] is an empty [StringName], unless the property is [constant TYPE_OBJECT] and it inherits from a class; + - [code]type[/code] is the property's type, as an [int] (see [enum Variant.Type]); + - [code]hint[/code] is [i]how[/i] the property is meant to be edited (see [enum PropertyHint]); + - [code]hint_string[/code] depends on the hint (see [enum PropertyHint]); + - [code]usage[/code] is a combination of [enum PropertyUsageFlags]. </description> </method> <method name="get_script" qualifiers="const"> <return type="Variant" /> <description> - Returns the object's [Script] instance, or [code]null[/code] if none is assigned. + Returns the object's [Script] instance, or [code]null[/code] if no script is attached. </description> </method> <method name="get_signal_connection_list" qualifiers="const"> <return type="Dictionary[]" /> <param index="0" name="signal" type="StringName" /> <description> - Returns an [Array] of connections for the given [param signal]. + Returns an [Array] of connections for the given [param signal] name. Each connection is represented as a [Dictionary] that contains three entries: + - [code]signal[/code] is a reference to the [Signal]; + - [code]callable[/code] is a reference to the [Callable]; + - [code]flags[/code] is a combination of [enum ConnectFlags]. </description> </method> <method name="get_signal_list" qualifiers="const"> <return type="Dictionary[]" /> <description> - Returns the list of signals as an [Array] of dictionaries. + Returns the list of existing signals as an [Array] of dictionaries. + [b]Note:[/b] Due of the implementation, each [Dictionary] is formatted very similarly to the returned values of [method get_method_list]. </description> </method> <method name="has_meta" qualifiers="const"> @@ -430,34 +658,36 @@ <param index="0" name="name" type="StringName" /> <description> Returns [code]true[/code] if a metadata entry is found with the given [param name]. See also [method get_meta], [method set_meta] and [method remove_meta]. - [b]Note:[/b] Metadata that has a [param name] starting with an underscore ([code]_[/code]) is considered editor-only. Editor-only metadata is not displayed in the inspector and should not be edited. + [b]Note:[/b] Metadata that has a [param name] starting with an underscore ([code]_[/code]) is considered editor-only. Editor-only metadata is not displayed in the Inspector and should not be edited, although it can still be found by this method. </description> </method> <method name="has_method" qualifiers="const"> <return type="bool" /> <param index="0" name="method" type="StringName" /> <description> - Returns [code]true[/code] if the object contains the given [param method]. + Returns [code]true[/code] if the the given [param method] name exists in the object. + [b]Note:[/b] In C#, [param method] must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in the [code]MethodName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="has_signal" qualifiers="const"> <return type="bool" /> <param index="0" name="signal" type="StringName" /> <description> - Returns [code]true[/code] if the given [param signal] exists. + Returns [code]true[/code] if the given [param signal] name exists in the object. + [b]Note:[/b] In C#, [param signal] must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in the [code]SignalName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="has_user_signal" qualifiers="const"> <return type="bool" /> <param index="0" name="signal" type="StringName" /> <description> - Returns [code]true[/code] if the given user-defined [param signal] exists. Only signals added using [method add_user_signal] are taken into account. + Returns [code]true[/code] if the given user-defined [param signal] name exists. Only signals added with [method add_user_signal] are included. </description> </method> <method name="is_blocking_signals" qualifiers="const"> <return type="bool" /> <description> - Returns [code]true[/code] if signal emission blocking is enabled. + Returns [code]true[/code] if the object is blocking its signals from being emitted. See [method set_block_signals]. </description> </method> <method name="is_class" qualifiers="const"> @@ -465,7 +695,21 @@ <param index="0" name="class" type="String" /> <description> Returns [code]true[/code] if the object inherits from the given [param class]. See also [method get_class]. - [b]Note:[/b] [method is_class] does not take [code]class_name[/code] declarations into account. If the object has a [code]class_name[/code] defined, [method is_class] will return [code]false[/code] for that name. + [codeblocks] + [gdscript] + var sprite2d = Sprite2D.new() + sprite2d.is_class("Sprite2D") # Returns true + sprite2d.is_class("Node") # Returns true + sprite2d.is_class("Node3D") # Returns false + [/gdscript] + [csharp] + var sprite2d = new Sprite2D(); + sprite2d.IsClass("Sprite2D"); // Returns true + sprite2d.IsClass("Node"); // Returns true + sprite2d.IsClass("Node3D"); // Returns false + [/csharp] + [/codeblocks] + [b]Note:[/b] This method ignores [code]class_name[/code] declarations in the object's script. </description> </method> <method name="is_connected" qualifiers="const"> @@ -473,7 +717,8 @@ <param index="0" name="signal" type="StringName" /> <param index="1" name="callable" type="Callable" /> <description> - Returns [code]true[/code] if a connection exists for a given [param signal] and [param callable]. + Returns [code]true[/code] if a connection exists between the given [param signal] name and [param callable]. + [b]Note:[/b] In C#, [param signal] must be in snake_case when referring to built-in Godot methods. Prefer using the names exposed in the [code]SignalName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="is_queued_for_deletion" qualifiers="const"> @@ -487,22 +732,44 @@ <param index="0" name="what" type="int" /> <param index="1" name="reversed" type="bool" default="false" /> <description> - Send a given notification to the object, which will also trigger a call to the [method _notification] method of all classes that the object inherits from. - If [param reversed] is [code]true[/code], [method _notification] is called first on the object's own class, and then up to its successive parent classes. If [param reversed] is [code]false[/code], [method _notification] is called first on the highest ancestor ([Object] itself), and then down to its successive inheriting classes. + Sends the given [param what] notification to all classes inherited by the object, triggering calls to [method _notification], starting from the highest ancestor (the [Object] class) and going down to the object's script. + If [param reversed] is [code]true[/code], the call order is reversed. + [codeblocks] + [gdscript] + var player = Node2D.new() + player.set_script(load("res://player.gd")) + + player.notification(NOTIFICATION_ENTER_TREE) + # The call order is Object -> Node -> Node2D -> player.gd. + + player.notification(NOTIFICATION_ENTER_TREE, true) + # The call order is player.gd -> Node2D -> Node -> Object. + [/gdscript] + [csharp] + var player = new Node2D(); + player.SetScript(GD.Load("res://player.gd")); + + player.Notification(NotificationEnterTree); + // The call order is Object -> Node -> Node2D -> player.gd. + + player.notification(NotificationEnterTree, true); + // The call order is player.gd -> Node2D -> Node -> Object. + [/csharp] + [/codeblocks] </description> </method> <method name="notify_property_list_changed"> <return type="void" /> <description> - Notify the editor that the property list has changed by emitting the [signal property_list_changed] signal, so that editor plugins can take the new values into account. + Emits the [signal property_list_changed] signal. This is mainly used to refresh the editor, so that the Inspector and editor plugins are properly updated. </description> </method> <method name="remove_meta"> <return type="void" /> <param index="0" name="name" type="StringName" /> <description> - Removes a given entry from the object's metadata. See also [method has_meta], [method get_meta] and [method set_meta]. - [b]Note:[/b] Metadata that has a [param name] starting with an underscore ([code]_[/code]) is considered editor-only. Editor-only metadata is not displayed in the inspector and should not be edited. + Removes the given entry [param name] from the object's metadata. See also [method has_meta], [method get_meta] and [method set_meta]. + [b]Note:[/b] Metadata that has a [param name] starting with an underscore ([code]_[/code]) is considered editor-only. Editor-only metadata is not displayed in the Inspector and should not be edited. </description> </method> <method name="set"> @@ -510,15 +777,27 @@ <param index="0" name="property" type="StringName" /> <param index="1" name="value" type="Variant" /> <description> - Assigns a new value to the given property. If the [param property] does not exist or the given value's type doesn't match, nothing will happen. - [b]Note:[/b] In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase). + Assigns [param value] to the given [param property]. If the property does not exist or the given [param value]'s type doesn't match, nothing happens. + [codeblocks] + [gdscript] + var node = Node2D.new() + node.set("global_scale", Vector2(8, 2.5)) + print(node.global_scale) # Prints (8, 2.5) + [/gdscript] + [csharp] + var node = new Node2D(); + node.Set("global_scale", new Vector2(8, 2.5)); + GD.Print(node.GlobalScale); // Prints Vector2(8, 2.5) + [/csharp] + [/codeblocks] + [b]Note:[/b] In C#, [param property] must be in snake_case when referring to built-in Godot properties. Prefer using the names exposed in the [code]PropertyName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="set_block_signals"> <return type="void" /> <param index="0" name="enable" type="bool" /> <description> - If set to [code]true[/code], signal emission is blocked. + If set to [code]true[/code], the object becomes unable to emit signals. As such, [method emit_signal] and signal connections will not work, until it is set to [code]false[/code]. </description> </method> <method name="set_deferred"> @@ -526,8 +805,30 @@ <param index="0" name="property" type="StringName" /> <param index="1" name="value" type="Variant" /> <description> - Assigns a new value to the given property, after the current frame's physics step. This is equivalent to calling [method set] via [method call_deferred], i.e. [code]call_deferred("set", property, value)[/code]. - [b]Note:[/b] In C#, the property name must be specified as snake_case if it is defined by a built-in Godot node. This doesn't apply to user-defined properties where you should use the same convention as in the C# source (typically PascalCase). + Assigns [param value] to the given [param property], after the current frame's physics step. This is equivalent to calling [method set] through [method call_deferred]. + [codeblocks] + [gdscript] + var node = Node2D.new() + add_child(node) + + node.rotation = 45.0 + node.set_deferred("rotation", 90.0) + print(node.rotation) # Prints 45.0 + + await get_tree().process_frame + print(node.rotation) # Prints 90.0 + [/gdscript] + [csharp] + var node = new Node2D(); + node.Rotation = 45f; + node.SetDeferred("rotation", 90f); + GD.Print(node.Rotation); // Prints 45.0 + + await ToSignal(GetTree(), SceneTree.SignalName.ProcessFrame); + GD.Print(node.Rotation); // Prints 90.0 + [/csharp] + [/codeblocks] + [b]Note:[/b] In C#, [param property] must be in snake_case when referring to built-in Godot properties. Prefer using the names exposed in the [code]PropertyName[/code] class to avoid allocating a new [StringName] on each call. </description> </method> <method name="set_indexed"> @@ -535,28 +836,29 @@ <param index="0" name="property_path" type="NodePath" /> <param index="1" name="value" type="Variant" /> <description> - Assigns a new value to the property identified by the [param property_path]. The path should be a [NodePath] relative to the current object and can use the colon character ([code]:[/code]) to access nested properties. Example: + Assigns a new [param value] to the property identified by the [param property_path]. The path should be a [NodePath] relative to this object, and can use the colon character ([code]:[/code]) to access nested properties. [codeblocks] [gdscript] var node = Node2D.new() node.set_indexed("position", Vector2(42, 0)) node.set_indexed("position:y", -10) - print(node.position) # (42, -10) + print(node.position) # Prints (42, -10) [/gdscript] [csharp] var node = new Node2D(); node.SetIndexed("position", new Vector2(42, 0)); node.SetIndexed("position:y", -10); - GD.Print(node.Position); // (42, -10) + GD.Print(node.Position); // Prints (42, -10) [/csharp] [/codeblocks] + [b]Note:[/b] In C#, [param property_path] must be in snake_case when referring to built-in Godot properties. </description> </method> <method name="set_message_translation"> <return type="void" /> <param index="0" name="enable" type="bool" /> <description> - Defines whether the object can translate strings (with calls to [method tr]). Enabled by default. + If set to [code]true[/code], allows the object to translate messages with [method tr] and [method tr_n]. Enabled by default. See also [method can_translate_messages]. </description> </method> <method name="set_meta"> @@ -564,24 +866,23 @@ <param index="0" name="name" type="StringName" /> <param index="1" name="value" type="Variant" /> <description> - Adds, changes or removes a given entry in the object's metadata. Metadata are serialized and can take any [Variant] value. - To remove a given entry from the object's metadata, use [method remove_meta]. Metadata is also removed if its value is set to [code]null[/code]. This means you can also use [code]set_meta("name", null)[/code] to remove metadata for [code]"name"[/code]. See also [method has_meta] and [method get_meta]. - [b]Note:[/b] Metadata that has a [param name] starting with an underscore ([code]_[/code]) is considered editor-only. Editor-only metadata is not displayed in the inspector and should not be edited. + Adds or changes the entry [param name] inside the object's metadata. The metadata [param value] can be any [Variant], although some types cannot be serialised correctly. + If [param value] is [code]null[/code], the entry is removed. This is the equivalent of using [method remove_meta]. See also [method has_meta] and [method get_meta]. + [b]Note:[/b] Metadata that has a [param name] starting with an underscore ([code]_[/code]) is considered editor-only. Editor-only metadata is not displayed in the Inspector dock and should not be edited. </description> </method> <method name="set_script"> <return type="void" /> <param index="0" name="script" type="Variant" /> <description> - Assigns a script to the object. Each object can have a single script assigned to it, which are used to extend its functionality. - If the object already had a script, the previous script instance will be freed and its variables and state will be lost. The new script's [method _init] method will be called. + Attaches [param script] to the object, and instantiates it. As a result, the script's [method _init] is called. A [Script] is used to extend the object's functionality. + If a script already exists, its instance is detached, and its property values and state are lost. Built-in property values are still kept. </description> </method> <method name="to_string"> <return type="String" /> <description> - Returns a [String] representing the object. If not overridden, defaults to [code]"[ClassName:RID]"[/code]. - Override the method [method _to_string] to customize the [String] representation. + Returns a [String] representing the object. Defaults to [code]"<ClassName#RID>"[/code]. Override [method _to_string] to customize the string representation of the object. </description> </method> <method name="tr" qualifiers="const"> @@ -589,9 +890,9 @@ <param index="0" name="message" type="StringName" /> <param index="1" name="context" type="StringName" default="""" /> <description> - Translates a message using translation catalogs configured in the Project Settings. An additional context could be used to specify the translation context. - Only works if message translation is enabled (which it is by default), otherwise it returns the [param message] unchanged. See [method set_message_translation]. - See [url=$DOCS_URL/tutorials/i18n/internationalizing_games.html]Internationalizing games[/url] for examples of the usage of this method. + Translates a [param message], using the translation catalogs configured in the Project Settings. Further [param context] can be specified to help with the translation. + If [method can_translate_messages] is [code]false[/code], or no translation is available, this method returns the [param message] without changes. See [method set_message_translation]. + For detailed examples, see [url=$DOCS_URL/tutorials/i18n/internationalizing_games.html]Internationalizing games[/url]. </description> </method> <method name="tr_n" qualifiers="const"> @@ -601,43 +902,45 @@ <param index="2" name="n" type="int" /> <param index="3" name="context" type="StringName" default="""" /> <description> - Translates a message involving plurals using translation catalogs configured in the Project Settings. An additional context could be used to specify the translation context. - Only works if message translation is enabled (which it is by default), otherwise it returns the [param message] or [param plural_message] unchanged. See [method set_message_translation]. - The number [param n] is the number or quantity of the plural object. It will be used to guide the translation system to fetch the correct plural form for the selected language. - [b]Note:[/b] Negative and floating-point values usually represent physical entities for which singular and plural don't clearly apply. In such cases, use [method tr]. - See [url=$DOCS_URL/tutorials/i18n/localization_using_gettext.html]Localization using gettext[/url] for examples of the usage of this method. + Translates a [param message] or [param plural_message], using the translation catalogs configured in the Project Settings. Further [param context] can be specified to help with the translation. + If [method can_translate_messages] is [code]false[/code], or no translation is available, this method returns [param message] or [param plural_message], without changes. See [method set_message_translation]. + The [param n] is the number, or amount, of the message's subject. It is used by the translation system to fetch the correct plural form for the current language. + For detailed examples, see [url=$DOCS_URL/tutorials/i18n/localization_using_gettext.html]Localization using gettext[/url]. + [b]Note:[/b] Negative and [float] numbers may not properly apply to some countable subjects. It's recommended handling these cases with [method tr]. </description> </method> </methods> <signals> <signal name="property_list_changed"> <description> + Emitted when [method notify_property_list_changed] is called. </description> </signal> <signal name="script_changed"> <description> - Emitted whenever the object's script is changed. + Emitted when the object's script is changed. + [b]Note:[/b] When this signal is emitted, the new script is not initialized yet. If you need to access the new script, defer connections to this signal with [constant CONNECT_DEFERRED]. </description> </signal> </signals> <constants> <constant name="NOTIFICATION_POSTINITIALIZE" value="0"> - Called right when the object is initialized. Not available in script. + Notification received when the object is initialized, before its script is attached. Used internally. </constant> <constant name="NOTIFICATION_PREDELETE" value="1"> - Called before the object is about to be deleted. + Notification received when the object is about to be deleted. Can act as the deconstructor of some programming languages. </constant> <constant name="CONNECT_DEFERRED" value="1" enum="ConnectFlags"> - Connects a signal in deferred mode. This way, signal emissions are stored in a queue, then set on idle time. + Deferred connections trigger their [Callable]s on idle time, rather than instantly. </constant> <constant name="CONNECT_PERSIST" value="2" enum="ConnectFlags"> - Persisting connections are saved when the object is serialized to file. + Persisting connections are stored when the object is serialized (such as when using [method PackedScene.pack]). In the editor, connections created through the Node dock are always persisting. </constant> <constant name="CONNECT_ONE_SHOT" value="4" enum="ConnectFlags"> One-shot connections disconnect themselves after emission. </constant> <constant name="CONNECT_REFERENCE_COUNTED" value="8" enum="ConnectFlags"> - Connect a signal as reference-counted. This means that a given signal can be connected several times to the same target, and will only be fully disconnected once no references are left. + Reference-counted connections can be assigned to the same [Callable] multiple times. Each disconnection decreases the internal counter. The signal fully disconnects only when the counter reaches 0. </constant> </constants> </class> diff --git a/doc/classes/OccluderInstance3D.xml b/doc/classes/OccluderInstance3D.xml index 0bebc7ea43..bc16fba500 100644 --- a/doc/classes/OccluderInstance3D.xml +++ b/doc/classes/OccluderInstance3D.xml @@ -42,7 +42,7 @@ </member> <member name="occluder" type="Occluder3D" setter="set_occluder" getter="get_occluder"> The occluder resource for this [OccluderInstance3D]. You can generate an occluder resource by selecting an [OccluderInstance3D] node then using the [b]Bake Occluders[/b] button at the top of the editor. - You can also draw your own 2D occluder polygon by adding a new [PolygonOccluder3D] resource to the [member occluder] property in the inspector. + You can also draw your own 2D occluder polygon by adding a new [PolygonOccluder3D] resource to the [member occluder] property in the Inspector. Alternatively, you can select a primitive occluder to use: [QuadOccluder3D], [BoxOccluder3D] or [SphereOccluder3D]. </member> </members> diff --git a/doc/classes/OfflineMultiplayerPeer.xml b/doc/classes/OfflineMultiplayerPeer.xml new file mode 100644 index 0000000000..5e15992d54 --- /dev/null +++ b/doc/classes/OfflineMultiplayerPeer.xml @@ -0,0 +1,12 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="OfflineMultiplayerPeer" inherits="MultiplayerPeer" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + A [MultiplayerPeer] which is always connected and acts as a server. + </brief_description> + <description> + This is the default [member MultiplayerAPI.multiplayer_peer] for the [member Node.multiplayer]. It mimics the behavior of a server with no peers connected. + This means that the [SceneTree] will act as the multiplayer authority by default. Calls to [method MultiplayerAPI.is_server] will return [code]true[/code], and calls to [method MultiplayerAPI.get_unique_id] will return [constant MultiplayerPeer.TARGET_PEER_SERVER]. + </description> + <tutorials> + </tutorials> +</class> diff --git a/doc/classes/OmniLight3D.xml b/doc/classes/OmniLight3D.xml index ce63dbdbc1..193ae8deeb 100644 --- a/doc/classes/OmniLight3D.xml +++ b/doc/classes/OmniLight3D.xml @@ -15,6 +15,7 @@ </member> <member name="omni_range" type="float" setter="set_param" getter="get_param" default="5.0"> The light's radius. Note that the effectively lit area may appear to be smaller depending on the [member omni_attenuation] in use. No matter the [member omni_attenuation] in use, the light will never reach anything outside this radius. + [b]Note:[/b] [member omni_range] is not affected by [member Node3D.scale] (the light's scale or its parent's scale). </member> <member name="omni_shadow_mode" type="int" setter="set_shadow_mode" getter="get_shadow_mode" enum="OmniLight3D.ShadowMode" default="1"> See [enum ShadowMode]. diff --git a/doc/classes/OptionButton.xml b/doc/classes/OptionButton.xml index 199535298c..e63e822648 100644 --- a/doc/classes/OptionButton.xml +++ b/doc/classes/OptionButton.xml @@ -216,7 +216,7 @@ <signal name="item_focused"> <param index="0" name="index" type="int" /> <description> - Emitted when the user navigates to an item using the [code]ui_up[/code] or [code]ui_down[/code] actions. The index of the item selected is passed as argument. + Emitted when the user navigates to an item using the [member ProjectSettings.input/ui_up] or [member ProjectSettings.input/ui_down] input actions. The index of the item selected is passed as argument. </description> </signal> <signal name="item_selected"> diff --git a/doc/classes/PathFollow3D.xml b/doc/classes/PathFollow3D.xml index ba7207be8f..fa7580b7b6 100644 --- a/doc/classes/PathFollow3D.xml +++ b/doc/classes/PathFollow3D.xml @@ -9,6 +9,16 @@ </description> <tutorials> </tutorials> + <methods> + <method name="correct_posture" qualifiers="static"> + <return type="Transform3D" /> + <param index="0" name="transform" type="Transform3D" /> + <param index="1" name="rotation_mode" type="int" enum="PathFollow3D.RotationMode" /> + <description> + Correct the [code]transform[/code]. [code]rotation_mode[/code] implicitly specifies how posture (forward, up and sideway direction) is caculated. + </description> + </method> + </methods> <members> <member name="cubic_interp" type="bool" setter="set_cubic_interpolation" getter="get_cubic_interpolation" default="true"> If [code]true[/code], the position between two cached points is interpolated cubically, and linearly otherwise. @@ -30,6 +40,9 @@ <member name="rotation_mode" type="int" setter="set_rotation_mode" getter="get_rotation_mode" enum="PathFollow3D.RotationMode" default="3"> Allows or forbids rotation on one or more axes, depending on the [enum RotationMode] constants being used. </member> + <member name="tilt_enabled" type="bool" setter="set_tilt_enabled" getter="is_tilt_enabled" default="true"> + If [code]true[/code], the tilt property of [Curve3D] takes effect. + </member> <member name="v_offset" type="float" setter="set_v_offset" getter="get_v_offset" default="0.0"> The node's offset perpendicular to the curve. </member> diff --git a/doc/classes/PhysicalSkyMaterial.xml b/doc/classes/PhysicalSkyMaterial.xml index 9d303d80e5..a8cfb9abc2 100644 --- a/doc/classes/PhysicalSkyMaterial.xml +++ b/doc/classes/PhysicalSkyMaterial.xml @@ -12,27 +12,28 @@ </tutorials> <members> <member name="energy_multiplier" type="float" setter="set_energy_multiplier" getter="get_energy_multiplier" default="1.0"> + The sky's overall brightness multiplier. Higher values result in a brighter sky. </member> <member name="ground_color" type="Color" setter="set_ground_color" getter="get_ground_color" default="Color(0.1, 0.07, 0.034, 1)"> Modulates the [Color] on the bottom half of the sky to represent the ground. </member> <member name="mie_coefficient" type="float" setter="set_mie_coefficient" getter="get_mie_coefficient" default="0.005"> - Controls the strength of mie scattering for the sky. Mie scattering results from light colliding with larger particles (like water). On earth, mie scattering results in a whitish color around the sun and horizon. + Controls the strength of [url=https://en.wikipedia.org/wiki/Mie_scattering]Mie scattering[/url] for the sky. Mie scattering results from light colliding with larger particles (like water). On earth, Mie scattering results in a whitish color around the sun and horizon. </member> <member name="mie_color" type="Color" setter="set_mie_color" getter="get_mie_color" default="Color(0.69, 0.729, 0.812, 1)"> - Controls the [Color] of the mie scattering effect. While not physically accurate, this allows for the creation of alien-looking planets. + Controls the [Color] of the [url=https://en.wikipedia.org/wiki/Mie_scattering]Mie scattering[/url] effect. While not physically accurate, this allows for the creation of alien-looking planets. </member> <member name="mie_eccentricity" type="float" setter="set_mie_eccentricity" getter="get_mie_eccentricity" default="0.8"> - Controls the direction of the mie scattering. A value of [code]1[/code] means that when light hits a particle it's passing through straight forward. A value of [code]-1[/code] means that all light is scatter backwards. + Controls the direction of the [url=https://en.wikipedia.org/wiki/Mie_scattering]Mie scattering[/url]. A value of [code]1[/code] means that when light hits a particle it's passing through straight forward. A value of [code]-1[/code] means that all light is scatter backwards. </member> <member name="night_sky" type="Texture2D" setter="set_night_sky" getter="get_night_sky"> [Texture2D] for the night sky. This is added to the sky, so if it is bright enough, it may be visible during the day. </member> <member name="rayleigh_coefficient" type="float" setter="set_rayleigh_coefficient" getter="get_rayleigh_coefficient" default="2.0"> - Controls the strength of the Rayleigh scattering. Rayleigh scattering results from light colliding with small particles. It is responsible for the blue color of the sky. + Controls the strength of the [url=https://en.wikipedia.org/wiki/Rayleigh_scattering]Rayleigh scattering[/url]. Rayleigh scattering results from light colliding with small particles. It is responsible for the blue color of the sky. </member> <member name="rayleigh_color" type="Color" setter="set_rayleigh_color" getter="get_rayleigh_color" default="Color(0.3, 0.405, 0.6, 1)"> - Controls the [Color] of the Rayleigh scattering. While not physically accurate, this allows for the creation of alien-looking planets. For example, setting this to a red [Color] results in a Mars-looking atmosphere with a corresponding blue sunset. + Controls the [Color] of the [url=https://en.wikipedia.org/wiki/Rayleigh_scattering]Rayleigh scattering[/url]. While not physically accurate, this allows for the creation of alien-looking planets. For example, setting this to a red [Color] results in a Mars-looking atmosphere with a corresponding blue sunset. </member> <member name="sun_disk_scale" type="float" setter="set_sun_disk_scale" getter="get_sun_disk_scale" default="1.0"> Sets the size of the sun disk. Default value is based on Sol's perceived size from Earth. diff --git a/doc/classes/PhysicsBody2D.xml b/doc/classes/PhysicsBody2D.xml index 59660b4de5..30fa54d669 100644 --- a/doc/classes/PhysicsBody2D.xml +++ b/doc/classes/PhysicsBody2D.xml @@ -25,12 +25,12 @@ </method> <method name="move_and_collide"> <return type="KinematicCollision2D" /> - <param index="0" name="distance" type="Vector2" /> + <param index="0" name="motion" type="Vector2" /> <param index="1" name="test_only" type="bool" default="false" /> <param index="2" name="safe_margin" type="float" default="0.08" /> <param index="3" name="recovery_as_collision" type="bool" default="false" /> <description> - Moves the body along the vector [param distance]. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param distance] should be computed using [code]delta[/code]. + Moves the body along the vector [param motion]. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param motion] should be computed using [code]delta[/code]. Returns a [KinematicCollision2D], which contains information about the collision when stopped, or when touching another body along the motion. If [param test_only] is [code]true[/code], the body does not move but the would-be collision information is given. [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody2D.safe_margin] for more details). @@ -47,13 +47,13 @@ <method name="test_move"> <return type="bool" /> <param index="0" name="from" type="Transform2D" /> - <param index="1" name="distance" type="Vector2" /> + <param index="1" name="motion" type="Vector2" /> <param index="2" name="collision" type="KinematicCollision2D" default="null" /> <param index="3" name="safe_margin" type="float" default="0.08" /> <param index="4" name="recovery_as_collision" type="bool" default="false" /> <description> - Checks for collisions without moving the body. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param distance] should be computed using [code]delta[/code]. - Virtually sets the node's position, scale and rotation to that of the given [Transform2D], then tries to move the body along the vector [param distance]. Returns [code]true[/code] if a collision would stop the body from moving along the whole path. + Checks for collisions without moving the body. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param motion] should be computed using [code]delta[/code]. + Virtually sets the node's position, scale and rotation to that of the given [Transform2D], then tries to move the body along the vector [param motion]. Returns [code]true[/code] if a collision would stop the body from moving along the whole path. [param collision] is an optional object of type [KinematicCollision2D], which contains additional information about the collision when stopped, or when touching another body along the motion. [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody2D.safe_margin] for more details). If [param recovery_as_collision] is [code]true[/code], any depenetration from the recovery phase is also reported as a collision; this is useful for checking whether the body would [i]touch[/i] any other bodies. diff --git a/doc/classes/PhysicsBody3D.xml b/doc/classes/PhysicsBody3D.xml index bf7882a1ea..2ef54683f2 100644 --- a/doc/classes/PhysicsBody3D.xml +++ b/doc/classes/PhysicsBody3D.xml @@ -32,13 +32,13 @@ </method> <method name="move_and_collide"> <return type="KinematicCollision3D" /> - <param index="0" name="distance" type="Vector3" /> + <param index="0" name="motion" type="Vector3" /> <param index="1" name="test_only" type="bool" default="false" /> <param index="2" name="safe_margin" type="float" default="0.001" /> <param index="3" name="recovery_as_collision" type="bool" default="false" /> <param index="4" name="max_collisions" type="int" default="1" /> <description> - Moves the body along the vector [param distance]. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param distance] should be computed using [code]delta[/code]. + Moves the body along the vector [param motion]. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param motion] should be computed using [code]delta[/code]. The body will stop if it collides. Returns a [KinematicCollision3D], which contains information about the collision when stopped, or when touching another body along the motion. If [param test_only] is [code]true[/code], the body does not move but the would-be collision information is given. [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody3D.safe_margin] for more details). @@ -64,14 +64,14 @@ <method name="test_move"> <return type="bool" /> <param index="0" name="from" type="Transform3D" /> - <param index="1" name="distance" type="Vector3" /> + <param index="1" name="motion" type="Vector3" /> <param index="2" name="collision" type="KinematicCollision3D" default="null" /> <param index="3" name="safe_margin" type="float" default="0.001" /> <param index="4" name="recovery_as_collision" type="bool" default="false" /> <param index="5" name="max_collisions" type="int" default="1" /> <description> - Checks for collisions without moving the body. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param distance] should be computed using [code]delta[/code]. - Virtually sets the node's position, scale and rotation to that of the given [Transform3D], then tries to move the body along the vector [param distance]. Returns [code]true[/code] if a collision would stop the body from moving along the whole path. + Checks for collisions without moving the body. In order to be frame rate independent in [method Node._physics_process] or [method Node._process], [param motion] should be computed using [code]delta[/code]. + Virtually sets the node's position, scale and rotation to that of the given [Transform3D], then tries to move the body along the vector [param motion]. Returns [code]true[/code] if a collision would stop the body from moving along the whole path. [param collision] is an optional object of type [KinematicCollision3D], which contains additional information about the collision when stopped, or when touching another body along the motion. [param safe_margin] is the extra margin used for collision recovery (see [member CharacterBody3D.safe_margin] for more details). If [param recovery_as_collision] is [code]true[/code], any depenetration from the recovery phase is also reported as a collision; this is useful for checking whether the body would [i]touch[/i] any other bodies. diff --git a/doc/classes/PhysicsDirectBodyState2D.xml b/doc/classes/PhysicsDirectBodyState2D.xml index fdc3a44e9d..eca6a1cbc7 100644 --- a/doc/classes/PhysicsDirectBodyState2D.xml +++ b/doc/classes/PhysicsDirectBodyState2D.xml @@ -76,6 +76,7 @@ <param index="0" name="torque" type="float" /> <description> Applies a rotational force without affecting position. A force is time dependent and meant to be applied every physics update. + [b]Note:[/b] [member inverse_inertia] is required for this to work. To have [member inverse_inertia], an active [CollisionShape2D] must be a child of the node, or you can manually set [member inverse_inertia]. </description> </method> <method name="apply_torque_impulse"> @@ -84,6 +85,7 @@ <description> Applies a rotational impulse to the body without affecting the position. An impulse is time-independent! Applying an impulse every frame would result in a framerate-dependent force. For this reason, it should only be used when simulating one-time impacts (use the "_force" functions otherwise). + [b]Note:[/b] [member inverse_inertia] is required for this to work. To have [member inverse_inertia], an active [CollisionShape2D] must be a child of the node, or you can manually set [member inverse_inertia]. </description> </method> <method name="get_constant_force" qualifiers="const"> diff --git a/doc/classes/PhysicsDirectBodyState3D.xml b/doc/classes/PhysicsDirectBodyState3D.xml index 04087cbfb6..a809384642 100644 --- a/doc/classes/PhysicsDirectBodyState3D.xml +++ b/doc/classes/PhysicsDirectBodyState3D.xml @@ -76,6 +76,7 @@ <param index="0" name="torque" type="Vector3" /> <description> Applies a rotational force without affecting position. A force is time dependent and meant to be applied every physics update. + [b]Note:[/b] [member inverse_inertia] is required for this to work. To have [member inverse_inertia], an active [CollisionShape3D] must be a child of the node, or you can manually set [member inverse_inertia]. </description> </method> <method name="apply_torque_impulse"> @@ -84,6 +85,7 @@ <description> Applies a rotational impulse to the body without affecting the position. An impulse is time-independent! Applying an impulse every frame would result in a framerate-dependent force. For this reason, it should only be used when simulating one-time impacts (use the "_force" functions otherwise). + [b]Note:[/b] [member inverse_inertia] is required for this to work. To have [member inverse_inertia], an active [CollisionShape3D] must be a child of the node, or you can manually set [member inverse_inertia]. </description> </method> <method name="get_constant_force" qualifiers="const"> diff --git a/doc/classes/PhysicsPointQueryParameters2D.xml b/doc/classes/PhysicsPointQueryParameters2D.xml index a6cbe2d574..e49d2a9f5f 100644 --- a/doc/classes/PhysicsPointQueryParameters2D.xml +++ b/doc/classes/PhysicsPointQueryParameters2D.xml @@ -22,7 +22,7 @@ The physics layers the query will detect (as a bitmask). By default, all collision layers are detected. See [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> <member name="exclude" type="RID[]" setter="set_exclude" getter="get_exclude" default="[]"> - The list of objects or object [RID]s that will be excluded from collisions. + The list of object [RID]s that will be excluded from collisions. Use [method CollisionObject2D.get_rid] to get the [RID] associated with a [CollisionObject2D]-derived node. </member> <member name="position" type="Vector2" setter="set_position" getter="get_position" default="Vector2(0, 0)"> The position being queried for, in global coordinates. diff --git a/doc/classes/PhysicsPointQueryParameters3D.xml b/doc/classes/PhysicsPointQueryParameters3D.xml index bedf05ce99..3270d3686d 100644 --- a/doc/classes/PhysicsPointQueryParameters3D.xml +++ b/doc/classes/PhysicsPointQueryParameters3D.xml @@ -18,8 +18,8 @@ <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="4294967295"> The physics layers the query will detect (as a bitmask). By default, all collision layers are detected. See [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> - <member name="exclude" type="Array" setter="set_exclude" getter="get_exclude" default="[]"> - The list of objects or object [RID]s that will be excluded from collisions. + <member name="exclude" type="RID[]" setter="set_exclude" getter="get_exclude" default="[]"> + The list of object [RID]s that will be excluded from collisions. Use [method CollisionObject3D.get_rid] to get the [RID] associated with a [CollisionObject3D]-derived node. </member> <member name="position" type="Vector3" setter="set_position" getter="get_position" default="Vector3(0, 0, 0)"> The position being queried for, in global coordinates. diff --git a/doc/classes/PhysicsRayQueryParameters2D.xml b/doc/classes/PhysicsRayQueryParameters2D.xml index d6a2662adc..cf5c31d9ec 100644 --- a/doc/classes/PhysicsRayQueryParameters2D.xml +++ b/doc/classes/PhysicsRayQueryParameters2D.xml @@ -35,7 +35,7 @@ The physics layers the query will detect (as a bitmask). By default, all collision layers are detected. See [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> <member name="exclude" type="RID[]" setter="set_exclude" getter="get_exclude" default="[]"> - The list of objects or object [RID]s that will be excluded from collisions. + The list of object [RID]s that will be excluded from collisions. Use [method CollisionObject2D.get_rid] to get the [RID] associated with a [CollisionObject2D]-derived node. </member> <member name="from" type="Vector2" setter="set_from" getter="get_from" default="Vector2(0, 0)"> The starting point of the ray being queried for, in global coordinates. diff --git a/doc/classes/PhysicsRayQueryParameters3D.xml b/doc/classes/PhysicsRayQueryParameters3D.xml index 620aa6bf5f..4f70eedb21 100644 --- a/doc/classes/PhysicsRayQueryParameters3D.xml +++ b/doc/classes/PhysicsRayQueryParameters3D.xml @@ -14,7 +14,7 @@ <param index="0" name="from" type="Vector3" /> <param index="1" name="to" type="Vector3" /> <param index="2" name="collision_mask" type="int" default="4294967295" /> - <param index="3" name="exclude" type="Array" default="[]" /> + <param index="3" name="exclude" type="RID[]" default="[]" /> <description> Returns a new, pre-configured [PhysicsRayQueryParameters3D] object. Use it to quickly create query parameters using the most common options. [codeblock] @@ -34,8 +34,8 @@ <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="4294967295"> The physics layers the query will detect (as a bitmask). By default, all collision layers are detected. See [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> - <member name="exclude" type="Array" setter="set_exclude" getter="get_exclude" default="[]"> - The list of objects or object [RID]s that will be excluded from collisions. + <member name="exclude" type="RID[]" setter="set_exclude" getter="get_exclude" default="[]"> + The list of object [RID]s that will be excluded from collisions. Use [method CollisionObject3D.get_rid] to get the [RID] associated with a [CollisionObject3D]-derived node. </member> <member name="from" type="Vector3" setter="set_from" getter="get_from" default="Vector3(0, 0, 0)"> The starting point of the ray being queried for, in global coordinates. diff --git a/doc/classes/PhysicsShapeQueryParameters2D.xml b/doc/classes/PhysicsShapeQueryParameters2D.xml index 8dcb329e7e..a73e60c6f5 100644 --- a/doc/classes/PhysicsShapeQueryParameters2D.xml +++ b/doc/classes/PhysicsShapeQueryParameters2D.xml @@ -19,7 +19,7 @@ The physics layers the query will detect (as a bitmask). By default, all collision layers are detected. See [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> <member name="exclude" type="RID[]" setter="set_exclude" getter="get_exclude" default="[]"> - The list of objects or object [RID]s that will be excluded from collisions. + The list of object [RID]s that will be excluded from collisions. Use [method CollisionObject2D.get_rid] to get the [RID] associated with a [CollisionObject2D]-derived node. </member> <member name="margin" type="float" setter="set_margin" getter="get_margin" default="0.0"> The collision margin for the shape. diff --git a/doc/classes/PhysicsShapeQueryParameters3D.xml b/doc/classes/PhysicsShapeQueryParameters3D.xml index 64100f847b..a3ff1765f9 100644 --- a/doc/classes/PhysicsShapeQueryParameters3D.xml +++ b/doc/classes/PhysicsShapeQueryParameters3D.xml @@ -18,8 +18,8 @@ <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="4294967295"> The physics layers the query will detect (as a bitmask). By default, all collision layers are detected. See [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> - <member name="exclude" type="Array" setter="set_exclude" getter="get_exclude" default="[]"> - The list of objects or object [RID]s that will be excluded from collisions. + <member name="exclude" type="RID[]" setter="set_exclude" getter="get_exclude" default="[]"> + The list of object [RID]s that will be excluded from collisions. Use [method CollisionObject3D.get_rid] to get the [RID] associated with a [CollisionObject3D]-derived node. </member> <member name="margin" type="float" setter="set_margin" getter="get_margin" default="0.0"> The collision margin for the shape. diff --git a/doc/classes/PhysicsTestMotionParameters2D.xml b/doc/classes/PhysicsTestMotionParameters2D.xml index d8f96511dd..be5e5a3617 100644 --- a/doc/classes/PhysicsTestMotionParameters2D.xml +++ b/doc/classes/PhysicsTestMotionParameters2D.xml @@ -14,9 +14,9 @@ If set to [code]false[/code], shapes of type [constant PhysicsServer2D.SHAPE_SEPARATION_RAY] are only used for separation when overlapping with other bodies. That's the main use for separation ray shapes. </member> <member name="exclude_bodies" type="RID[]" setter="set_exclude_bodies" getter="get_exclude_bodies" default="[]"> - Optional array of body [RID] to exclude from collision. + Optional array of body [RID] to exclude from collision. Use [method CollisionObject2D.get_rid] to get the [RID] associated with a [CollisionObject2D]-derived node. </member> - <member name="exclude_objects" type="Array" setter="set_exclude_objects" getter="get_exclude_objects" default="[]"> + <member name="exclude_objects" type="int[]" setter="set_exclude_objects" getter="get_exclude_objects" default="[]"> Optional array of object unique instance ID to exclude from collision. See [method Object.get_instance_id]. </member> <member name="from" type="Transform2D" setter="set_from" getter="get_from" default="Transform2D(1, 0, 0, 1, 0, 0)"> @@ -30,7 +30,7 @@ </member> <member name="recovery_as_collision" type="bool" setter="set_recovery_as_collision_enabled" getter="is_recovery_as_collision_enabled" default="false"> If set to [code]true[/code], any depenetration from the recovery phase is reported as a collision; this is used e.g. by [CharacterBody2D] for improving floor detection during floor snapping. - If set to [code]false[/code], only collisions resulting from the motion are reported, which is generally the desired behaviour. + If set to [code]false[/code], only collisions resulting from the motion are reported, which is generally the desired behavior. </member> </members> </class> diff --git a/doc/classes/PhysicsTestMotionParameters3D.xml b/doc/classes/PhysicsTestMotionParameters3D.xml index e8f80ae131..be7d05691e 100644 --- a/doc/classes/PhysicsTestMotionParameters3D.xml +++ b/doc/classes/PhysicsTestMotionParameters3D.xml @@ -13,10 +13,10 @@ If set to [code]true[/code], shapes of type [constant PhysicsServer3D.SHAPE_SEPARATION_RAY] are used to detect collisions and can stop the motion. Can be useful when snapping to the ground. If set to [code]false[/code], shapes of type [constant PhysicsServer3D.SHAPE_SEPARATION_RAY] are only used for separation when overlapping with other bodies. That's the main use for separation ray shapes. </member> - <member name="exclude_bodies" type="Array" setter="set_exclude_bodies" getter="get_exclude_bodies" default="[]"> - Optional array of body [RID] to exclude from collision. + <member name="exclude_bodies" type="RID[]" setter="set_exclude_bodies" getter="get_exclude_bodies" default="[]"> + Optional array of body [RID] to exclude from collision. Use [method CollisionObject3D.get_rid] to get the [RID] associated with a [CollisionObject3D]-derived node. </member> - <member name="exclude_objects" type="Array" setter="set_exclude_objects" getter="get_exclude_objects" default="[]"> + <member name="exclude_objects" type="int[]" setter="set_exclude_objects" getter="get_exclude_objects" default="[]"> Optional array of object unique instance ID to exclude from collision. See [method Object.get_instance_id]. </member> <member name="from" type="Transform3D" setter="set_from" getter="get_from" default="Transform3D(1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0)"> @@ -33,7 +33,7 @@ </member> <member name="recovery_as_collision" type="bool" setter="set_recovery_as_collision_enabled" getter="is_recovery_as_collision_enabled" default="false"> If set to [code]true[/code], any depenetration from the recovery phase is reported as a collision; this is used e.g. by [CharacterBody3D] for improving floor detection during floor snapping. - If set to [code]false[/code], only collisions resulting from the motion are reported, which is generally the desired behaviour. + If set to [code]false[/code], only collisions resulting from the motion are reported, which is generally the desired behavior. </member> </members> </class> diff --git a/doc/classes/PlaceholderCubemap.xml b/doc/classes/PlaceholderCubemap.xml index 3617c6ac2c..0892b023a2 100644 --- a/doc/classes/PlaceholderCubemap.xml +++ b/doc/classes/PlaceholderCubemap.xml @@ -1,8 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="PlaceholderCubemap" inherits="PlaceholderTextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Placeholder class for a cubemap texture. </brief_description> <description> + This class is used when loading a project that uses a [Cubemap] subclass in 2 conditions: + - When running the project exported in dedicated server mode, only the texture's dimensions are kept (as they may be relied upon for gameplay purposes or positioning of other elements). This allows reducing the exported PCK's size significantly. + - When this subclass is missing due to using a different engine version or build (e.g. modules disabled). </description> <tutorials> </tutorials> diff --git a/doc/classes/PlaceholderCubemapArray.xml b/doc/classes/PlaceholderCubemapArray.xml index 1fcf1e7795..c7a7e9154c 100644 --- a/doc/classes/PlaceholderCubemapArray.xml +++ b/doc/classes/PlaceholderCubemapArray.xml @@ -1,8 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="PlaceholderCubemapArray" inherits="PlaceholderTextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Placeholder class for a cubemap texture array. </brief_description> <description> + This class is used when loading a project that uses a [CubemapArray] subclass in 2 conditions: + - When running the project exported in dedicated server mode, only the texture's dimensions are kept (as they may be relied upon for gameplay purposes or positioning of other elements). This allows reducing the exported PCK's size significantly. + - When this subclass is missing due to using a different engine version or build (e.g. modules disabled). </description> <tutorials> </tutorials> diff --git a/doc/classes/PlaceholderMaterial.xml b/doc/classes/PlaceholderMaterial.xml index c66641d81c..7febdc7a07 100644 --- a/doc/classes/PlaceholderMaterial.xml +++ b/doc/classes/PlaceholderMaterial.xml @@ -1,8 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="PlaceholderMaterial" inherits="Material" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Placeholder class for a material. </brief_description> <description> + This class is used when loading a project that uses a [Material] subclass in 2 conditions: + - When running the project exported in dedicated server mode, only the texture's dimensions are kept (as they may be relied upon for gameplay purposes or positioning of other elements). This allows reducing the exported PCK's size significantly. + - When this subclass is missing due to using a different engine version or build (e.g. modules disabled). </description> <tutorials> </tutorials> diff --git a/doc/classes/PlaceholderMesh.xml b/doc/classes/PlaceholderMesh.xml index cc688816b6..8021a57878 100644 --- a/doc/classes/PlaceholderMesh.xml +++ b/doc/classes/PlaceholderMesh.xml @@ -1,13 +1,18 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="PlaceholderMesh" inherits="Mesh" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Placeholder class for a mesh. </brief_description> <description> + This class is used when loading a project that uses a [Mesh] subclass in 2 conditions: + - When running the project exported in dedicated server mode, only the texture's dimensions are kept (as they may be relied upon for gameplay purposes or positioning of other elements). This allows reducing the exported PCK's size significantly. + - When this subclass is missing due to using a different engine version or build (e.g. modules disabled). </description> <tutorials> </tutorials> <members> <member name="aabb" type="AABB" setter="set_aabb" getter="get_aabb" default="AABB(0, 0, 0, 0, 0, 0)"> + The smallest [AABB] enclosing this mesh in local space. </member> </members> </class> diff --git a/doc/classes/PlaceholderTexture2D.xml b/doc/classes/PlaceholderTexture2D.xml index 76e575265b..c889055e4d 100644 --- a/doc/classes/PlaceholderTexture2D.xml +++ b/doc/classes/PlaceholderTexture2D.xml @@ -1,13 +1,19 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="PlaceholderTexture2D" inherits="Texture2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Placeholder class for a 2-dimensional texture. </brief_description> <description> + This class is used when loading a project that uses a [Texture2D] subclass in 2 conditions: + - When running the project exported in dedicated server mode, only the texture's dimensions are kept (as they may be relied upon for gameplay purposes or positioning of other elements). This allows reducing the exported PCK's size significantly. + - When this subclass is missing due to using a different engine version or build (e.g. modules disabled). </description> <tutorials> </tutorials> <members> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="size" type="Vector2" setter="set_size" getter="get_size" default="Vector2(1, 1)"> + The texture's size (in pixels). </member> </members> </class> diff --git a/doc/classes/PlaceholderTexture2DArray.xml b/doc/classes/PlaceholderTexture2DArray.xml index a502e5d334..a749e8c039 100644 --- a/doc/classes/PlaceholderTexture2DArray.xml +++ b/doc/classes/PlaceholderTexture2DArray.xml @@ -1,8 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="PlaceholderTexture2DArray" inherits="PlaceholderTextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Placeholder class for a 2-dimensional texture array. </brief_description> <description> + This class is used when loading a project that uses a [Texture2D] subclass in 2 conditions: + - When running the project exported in dedicated server mode, only the texture's dimensions are kept (as they may be relied upon for gameplay purposes or positioning of other elements). This allows reducing the exported PCK's size significantly. + - When this subclass is missing due to using a different engine version or build (e.g. modules disabled). </description> <tutorials> </tutorials> diff --git a/doc/classes/PlaceholderTexture3D.xml b/doc/classes/PlaceholderTexture3D.xml index d31e538307..ccd3c94fc2 100644 --- a/doc/classes/PlaceholderTexture3D.xml +++ b/doc/classes/PlaceholderTexture3D.xml @@ -1,13 +1,18 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="PlaceholderTexture3D" inherits="Texture3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Placeholder class for a 3-dimensional texture. </brief_description> <description> + This class is used when loading a project that uses a [Texture3D] subclass in 2 conditions: + - When running the project exported in dedicated server mode, only the texture's dimensions are kept (as they may be relied upon for gameplay purposes or positioning of other elements). This allows reducing the exported PCK's size significantly. + - When this subclass is missing due to using a different engine version or build (e.g. modules disabled). </description> <tutorials> </tutorials> <members> <member name="size" type="Vector3i" setter="set_size" getter="get_size" default="Vector3i(1, 1, 1)"> + The texture's size (in pixels). </member> </members> </class> diff --git a/doc/classes/PlaceholderTextureLayered.xml b/doc/classes/PlaceholderTextureLayered.xml index 39af08473a..8cc6dd606a 100644 --- a/doc/classes/PlaceholderTextureLayered.xml +++ b/doc/classes/PlaceholderTextureLayered.xml @@ -1,15 +1,21 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="PlaceholderTextureLayered" inherits="TextureLayered" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Placeholder class for a 2-dimensional texture array. </brief_description> <description> + This class is used when loading a project that uses a [TextureLayered] subclass in 2 conditions: + - When running the project exported in dedicated server mode, only the texture's dimensions are kept (as they may be relied upon for gameplay purposes or positioning of other elements). This allows reducing the exported PCK's size significantly. + - When this subclass is missing due to using a different engine version or build (e.g. modules disabled). </description> <tutorials> </tutorials> <members> <member name="layers" type="int" setter="set_layers" getter="get_layers" default="1"> + The number of layers in the texture array. </member> <member name="size" type="Vector2i" setter="set_size" getter="get_size" default="Vector2i(1, 1)"> + The size of each texture layer (in pixels). </member> </members> </class> diff --git a/doc/classes/Polygon2D.xml b/doc/classes/Polygon2D.xml index 12f8055180..a3fc326351 100644 --- a/doc/classes/Polygon2D.xml +++ b/doc/classes/Polygon2D.xml @@ -92,6 +92,7 @@ [b]Note:[/b] This returns a copy of the [PackedVector2Array] rather than a reference. </member> <member name="polygons" type="Array" setter="set_polygons" getter="get_polygons" default="[]"> + The list of polygons, in case more than one is being represented. Every individual polygon is stored as a [PackedInt32Array] where each [int] is an index to a point in [member polygon]. If empty, this property will be ignored, and the resulting single polygon will be composed of all points in [member polygon], using the order they are stored in. </member> <member name="skeleton" type="NodePath" setter="set_skeleton" getter="get_skeleton" default="NodePath("")"> </member> diff --git a/doc/classes/Popup.xml b/doc/classes/Popup.xml index 3fcf0a9b8f..a56bf77774 100644 --- a/doc/classes/Popup.xml +++ b/doc/classes/Popup.xml @@ -4,7 +4,7 @@ Popup is a base window container for popup-like subwindows. </brief_description> <description> - Popup is a base window container for popup-like subwindows. It's a modal by default (see [member popup_window]) and has helpers for custom popup behavior. + Popup is a base window container for popup-like subwindows. It's a modal by default (see [member Window.popup_window]) and has helpers for custom popup behavior. </description> <tutorials> </tutorials> diff --git a/doc/classes/PopupMenu.xml b/doc/classes/PopupMenu.xml index c99760996f..a69163f429 100644 --- a/doc/classes/PopupMenu.xml +++ b/doc/classes/PopupMenu.xml @@ -526,15 +526,14 @@ <signal name="id_focused"> <param index="0" name="id" type="int" /> <description> - Emitted when user navigated to an item of some [param id] using [code]ui_up[/code] or [code]ui_down[/code] action. + Emitted when the user navigated to an item of some [param id] using the [member ProjectSettings.input/ui_up] or [member ProjectSettings.input/ui_down] input action. </description> </signal> <signal name="id_pressed"> <param index="0" name="id" type="int" /> <description> Emitted when an item of some [param id] is pressed or its accelerator is activated. - - [b]Note:[/b] If [param id] is negative (either explicitly or due to overflow), this will return the correponding index instead. + [b]Note:[/b] If [param id] is negative (either explicitly or due to overflow), this will return the corresponding index instead. </description> </signal> <signal name="index_pressed"> @@ -545,6 +544,7 @@ </signal> <signal name="menu_changed"> <description> + Emitted when any item is added, modified or removed. </description> </signal> </signals> @@ -577,8 +577,10 @@ Width of the single indentation level. </theme_item> <theme_item name="item_end_padding" data_type="constant" type="int" default="2"> + Horizontal padding to the right of the items (or left, in RTL layout). </theme_item> <theme_item name="item_start_padding" data_type="constant" type="int" default="2"> + Horizontal padding to the left of the items (or right, in RTL layout). </theme_item> <theme_item name="outline_size" data_type="constant" type="int" default="0"> The size of the item text outline. diff --git a/doc/classes/PortableCompressedTexture2D.xml b/doc/classes/PortableCompressedTexture2D.xml index c7e2f2fbdc..693eaafad3 100644 --- a/doc/classes/PortableCompressedTexture2D.xml +++ b/doc/classes/PortableCompressedTexture2D.xml @@ -21,8 +21,8 @@ <param index="3" name="lossy_quality" type="float" default="0.8" /> <description> Initializes the compressed texture from a base image. The compression mode must be provided. - If this image will be used as a normal map, the "normal map" flag is recommended, to ensure optimum quality. - If lossy compression is requested, the quality setting can optionally be provided. This maps to Lossy WEBP compression quality. + [param normal_map] is recommended to ensure optimum quality if this image will be used as a normal map. + If lossy compression is requested, the quality setting can optionally be provided. This maps to Lossy WebP compression quality. </description> </method> <method name="get_compression_mode" qualifiers="const"> @@ -58,6 +58,7 @@ When running on the editor, this class will keep the source compressed data in memory. Otherwise, the source compressed data is lost after loading and the resource can't be re saved. This flag allows to keep the compressed data in memory if you intend it to persist after loading. </member> + <member name="resource_local_to_scene" type="bool" setter="set_local_to_scene" getter="is_local_to_scene" overrides="Resource" default="false" /> <member name="size_override" type="Vector2" setter="set_size_override" getter="get_size_override" default="Vector2(0, 0)"> Allow overriding the texture size (for 2D only). </member> diff --git a/doc/classes/PrimitiveMesh.xml b/doc/classes/PrimitiveMesh.xml index 1b9ecdbfa0..b1c8907d8e 100644 --- a/doc/classes/PrimitiveMesh.xml +++ b/doc/classes/PrimitiveMesh.xml @@ -34,15 +34,21 @@ </method> </methods> <members> - <member name="custom_aabb" type="AABB" setter="set_custom_aabb" getter="get_custom_aabb"> + <member name="add_uv2" type="bool" setter="set_add_uv2" getter="get_add_uv2" default="false"> + If set, generates UV2 UV coordinates applying a padding using the [member uv2_padding] setting. UV2 is needed for lightmapping. + </member> + <member name="custom_aabb" type="AABB" setter="set_custom_aabb" getter="get_custom_aabb" default="AABB(0, 0, 0, 0, 0, 0)"> Overrides the [AABB] with one defined by user for use with frustum culling. Especially useful to avoid unexpected culling when using a shader to offset vertices. </member> - <member name="flip_faces" type="bool" setter="set_flip_faces" getter="get_flip_faces"> + <member name="flip_faces" type="bool" setter="set_flip_faces" getter="get_flip_faces" default="false"> If set, the order of the vertices in each triangle are reversed resulting in the backside of the mesh being drawn. This gives the same result as using [constant BaseMaterial3D.CULL_FRONT] in [member BaseMaterial3D.cull_mode]. </member> <member name="material" type="Material" setter="set_material" getter="get_material"> The current [Material] of the primitive mesh. </member> + <member name="uv2_padding" type="float" setter="set_uv2_padding" getter="get_uv2_padding" default="2.0"> + If [member add_uv2] is set, specifies the padding in pixels applied along seams of the mesh. If at generation the size of the lightmap texture can't be determined, the UVs are calculated assuming a texture size of 1024x1024. + </member> </members> </class> diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index a8080c70c6..1f0a8d91fa 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -208,7 +208,7 @@ If [code]true[/code], applies linear filtering when scaling the image (recommended for high-resolution artwork). If [code]false[/code], uses nearest-neighbor interpolation (recommended for pixel art). </member> <member name="application/config/custom_user_dir_name" type="String" setter="" getter="" default=""""> - This user directory is used for storing persistent data ([code]user://[/code] filesystem). If left empty, [code]user://[/code] resolves to a project-specific folder in Godot's own configuration folder (see [method OS.get_user_data_dir]). If a custom directory name is defined, this name will be used instead and appended to the system-specific user data directory (same parent folder as the Godot configuration folder documented in [method OS.get_user_data_dir]). + This user directory is used for storing persistent data ([code]user://[/code] filesystem). If a custom directory name is defined, this name will be appended to the system-specific user data directory (same parent folder as the Godot configuration folder documented in [method OS.get_user_data_dir]). The [member application/config/use_custom_user_dir] setting must be enabled for this to take effect. </member> <member name="application/config/description" type="String" setter="" getter="" default=""""> @@ -235,7 +235,8 @@ [b]Note:[/b] Regardless of this setting's value, [code]res://override.cfg[/code] will still be read to override the project settings. </member> <member name="application/config/use_custom_user_dir" type="bool" setter="" getter="" default="false"> - If [code]true[/code], the project will save user data to its own user directory (see [member application/config/custom_user_dir_name]). This setting is only effective on desktop platforms. A name must be set in the [member application/config/custom_user_dir_name] setting for this to take effect. If [code]false[/code], the project will save user data to [code](OS user data directory)/Godot/app_userdata/(project name)[/code]. + If [code]true[/code], the project will save user data to its own user directory. If [member application/config/custom_user_dir_name] is empty, [code]<OS user data directory>/<project name>[/code] directory will be used. If [code]false[/code], the project will save user data to [code]<OS user data directory>/Godot/app_userdata/<project name>[/code]. + See also [url=$DOCS_URL/tutorials/io/data_paths.html#accessing-persistent-user-data-user]File paths in Godot projects[/url]. This setting is only effective on desktop platforms. </member> <member name="application/config/use_hidden_project_data_directory" type="bool" setter="" getter="" default="true"> If [code]true[/code], the project will use a hidden directory ([code].godot[/code]) for storing project-specific data (metadata, shader cache, etc.). @@ -251,7 +252,7 @@ Changes to this setting will only be applied upon restarting the application. </member> <member name="application/run/disable_stdout" type="bool" setter="" getter="" default="false"> - If [code]true[/code], disables printing to standard output. This is equivalent to starting the editor or project with the [code]--quiet[/code] command line argument. See also [member application/run/disable_stderr]. + If [code]true[/code], disables printing to standard output. This is equivalent to starting the editor or project with the [code]--quiet[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url]. See also [member application/run/disable_stderr]. Changes to this setting will only be applied upon restarting the application. </member> <member name="application/run/flush_stdout_on_print" type="bool" setter="" getter="" default="false"> @@ -297,7 +298,7 @@ <member name="audio/driver/driver" type="String" setter="" getter=""> Specifies the audio driver to use. This setting is platform-dependent as each platform supports different audio drivers. If left empty, the default audio driver will be used. The [code]Dummy[/code] audio driver disables all audio playback and recording, which is useful for non-game applications as it reduces CPU usage. It also prevents the engine from appearing as an application playing audio in the OS' audio mixer. - [b]Note:[/b] The driver in use can be overridden at runtime via the [code]--audio-driver[/code] command line argument. + [b]Note:[/b] The driver in use can be overridden at runtime via the [code]--audio-driver[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url]. </member> <member name="audio/driver/enable_input" type="bool" setter="" getter="" default="false"> If [code]true[/code], microphone input will be allowed. This requires appropriate permissions to be set when exporting to Android or iOS. @@ -317,11 +318,13 @@ <member name="audio/driver/output_latency.web" type="int" setter="" getter="" default="50"> Safer override for [member audio/driver/output_latency] in the Web platform, to avoid audio issues especially on mobile devices. </member> - <member name="audio/general/2d_panning_strength" type="float" setter="" getter="" default="1.0"> - The base strength of the panning effect for all AudioStreamPlayer2D nodes. The panning strength can be further scaled on each Node using [member AudioStreamPlayer2D.panning_strength]. + <member name="audio/general/2d_panning_strength" type="float" setter="" getter="" default="0.5"> + The base strength of the panning effect for all [AudioStreamPlayer2D] nodes. The panning strength can be further scaled on each Node using [member AudioStreamPlayer2D.panning_strength]. A value of [code]0.0[/code] disables stereo panning entirely, leaving only volume attenuation in place. A value of [code]1.0[/code] completely mutes one of the channels if the sound is located exactly to the left (or right) of the listener. + The default value of [code]0.5[/code] is tuned for headphones. When using speakers, you may find lower values to sound better as speakers have a lower stereo separation compared to headphones. </member> - <member name="audio/general/3d_panning_strength" type="float" setter="" getter="" default="1.0"> - The base strength of the panning effect for all AudioStreamPlayer3D nodes. The panning strength can be further scaled on each Node using [member AudioStreamPlayer3D.panning_strength]. + <member name="audio/general/3d_panning_strength" type="float" setter="" getter="" default="0.5"> + The base strength of the panning effect for all [AudioStreamPlayer3D] nodes. The panning strength can be further scaled on each Node using [member AudioStreamPlayer3D.panning_strength]. A value of [code]0.0[/code] disables stereo panning entirely, leaving only volume attenuation in place. A value of [code]1.0[/code] completely mutes one of the channels if the sound is located exactly to the left (or right) of the listener. + The default value of [code]0.5[/code] is tuned for headphones. When using speakers, you may find lower values to sound better as speakers have a lower stereo separation compared to headphones. </member> <member name="audio/video/video_delay_compensation_ms" type="int" setter="" getter="" default="0"> Setting to hardcode audio delay when playing video. Best to leave this untouched unless you know what you are doing. @@ -341,6 +344,9 @@ <member name="compression/formats/zstd/window_log_size" type="int" setter="" getter="" default="27"> Largest size limit (in power of 2) allowed when compressing using long-distance matching with Zstandard. Higher values can result in better compression, but will require more memory when compressing and decompressing. </member> + <member name="debug/disable_touch" type="bool" setter="" getter="" default="false"> + Disable touch input. Only has effect on iOS. + </member> <member name="debug/file_logging/enable_file_logging" type="bool" setter="" getter="" default="false"> If [code]true[/code], logs all output to files. </member> @@ -395,7 +401,7 @@ <member name="debug/gdscript/warnings/redundant_await" type="int" setter="" getter="" default="1"> When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when a function that is not a coroutine is called with await. </member> - <member name="debug/gdscript/warnings/return_value_discarded" type="int" setter="" getter="" default="1"> + <member name="debug/gdscript/warnings/return_value_discarded" type="int" setter="" getter="" default="0"> When set to [code]warn[/code] or [code]error[/code], produces a warning or an error respectively when calling a function without using its return value (by assigning it to a variable or using it as a function argument). Such return values are sometimes used to denote possible errors using the [enum Error] enum. </member> <member name="debug/gdscript/warnings/shadowed_global_identifier" type="int" setter="" getter="" default="1"> @@ -480,7 +486,7 @@ Print GPU profile information to standard output every second. This includes how long each frame takes the GPU to render on average, broken down into different steps of the render pipeline, such as CanvasItems, shadows, glow, etc. </member> <member name="debug/settings/stdout/verbose_stdout" type="bool" setter="" getter="" default="false"> - Print more information to standard output when running. It displays information such as memory leaks, which scenes and resources are being loaded, etc. This can also be enabled using the [code]--verbose[/code] or [code]-v[/code] command line argument, even on an exported project. See also [method OS.is_stdout_verbose] and [method @GlobalScope.print_verbose]. + Print more information to standard output when running. It displays information such as memory leaks, which scenes and resources are being loaded, etc. This can also be enabled using the [code]--verbose[/code] or [code]-v[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url], even on an exported project. See also [method OS.is_stdout_verbose] and [method @GlobalScope.print_verbose]. </member> <member name="debug/shapes/collision/contact_color" type="Color" setter="" getter="" default="Color(1, 0.2, 0.1, 0.8)"> Color of the contact points between collision shapes, visible when "Visible Collision Shapes" is enabled in the Debug menu. @@ -552,7 +558,7 @@ Position offset for tooltips, relative to the mouse cursor's hotspot. </member> <member name="display/window/dpi/allow_hidpi" type="bool" setter="" getter="" default="true"> - If [code]true[/code], allows HiDPI display on Windows, macOS, Android, iOS and Web. If [code]false[/code], the platform's low-DPI fallback will be used on HiDPI displays, which causes the window to be displayed in a blurry or pixelated manner (and can cause various window management bugs). Therefore, it is recommended to make your project scale to [url=$DOCS_URL/tutorials/viewports/multiple_resolutions.html]multiple resolutions[/url] instead of disabling this setting. + If [code]true[/code], allows HiDPI display on Windows, macOS, Android, iOS and Web. If [code]false[/code], the platform's low-DPI fallback will be used on HiDPI displays, which causes the window to be displayed in a blurry or pixelated manner (and can cause various window management bugs). Therefore, it is recommended to make your project scale to [url=$DOCS_URL/tutorials/rendering/multiple_resolutions.html]multiple resolutions[/url] instead of disabling this setting. [b]Note:[/b] This setting has no effect on Linux as DPI-awareness fallbacks are not supported there. </member> <member name="display/window/energy_saving/keep_screen_on" type="bool" setter="" getter="" default="true"> @@ -565,6 +571,9 @@ The default screen orientation to use on mobile devices. See [enum DisplayServer.ScreenOrientation] for possible values. [b]Note:[/b] When set to a portrait orientation, this project setting does not flip the project resolution's width and height automatically. Instead, you have to set [member display/window/size/viewport_width] and [member display/window/size/viewport_height] accordingly. </member> + <member name="display/window/ios/allow_high_refresh_rate" type="bool" setter="" getter="" default="true"> + If [code]true[/code], iOS devices that support high refresh rate/"ProMotion" will be allowed to render at up to 120 frames per second. + </member> <member name="display/window/ios/hide_home_indicator" type="bool" setter="" getter="" default="true"> If [code]true[/code], the home indicator is hidden automatically. This only affects iOS devices without a physical home button. </member> @@ -630,7 +639,7 @@ </member> <member name="editor/movie_writer/fps" type="int" setter="" getter="" default="60"> The number of frames per second to record in the video when writing a movie. Simulation speed will adjust to always match the specified framerate, which means the engine will appear to run slower at higher [member editor/movie_writer/fps] values. Certain FPS values will require you to adjust [member editor/movie_writer/mix_rate] to prevent audio from desynchronizing over time. - This can be specified manually on the command line using the [code]--fixed-fps <fps>[/code] command line argument. + This can be specified manually on the command line using the [code]--fixed-fps <fps>[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url]. </member> <member name="editor/movie_writer/mix_rate" type="int" setter="" getter="" default="48000"> The audio mix rate to use in the recorded audio when writing a movie (in Hz). This can be different from [member audio/driver/mix_rate], but this value must be divisible by [member editor/movie_writer/fps] to prevent audio from desynchronizing over time. @@ -694,7 +703,8 @@ Default value for [member ScrollContainer.scroll_deadzone], which will be used for all [ScrollContainer]s unless overridden. </member> <member name="gui/common/swap_cancel_ok" type="bool" setter="" getter=""> - If [code]true[/code], swaps Cancel and OK buttons in dialogs on Windows and UWP to follow interface conventions. + If [code]true[/code], swaps [b]Cancel[/b] and [b]OK[/b] buttons in dialogs on Windows and UWP to follow interface conventions. [method DisplayServer.get_swap_cancel_ok] can be used to query whether buttons are swapped at run-time. + [b]Note:[/b] This doesn't affect native dialogs such as the ones spawned by [method DisplayServer.dialog_show]. </member> <member name="gui/common/text_edit_undo_stack_max_size" type="int" setter="" getter="" default="1024"> Maximum undo/redo history size for [TextEdit] fields. @@ -722,14 +732,14 @@ [b]Note:[/b] This setting does not affect custom [Font]s used within the project. </member> <member name="gui/theme/default_font_subpixel_positioning" type="int" setter="" getter="" default="1"> - Default font glyph sub-pixel positioning mode. See [member FontFile.subpixel_positioning]. + Default font glyph subpixel positioning mode. See [member FontFile.subpixel_positioning]. </member> <member name="gui/theme/default_theme_scale" type="float" setter="" getter="" default="1.0"> - The default scale factor for [Control]s, when not overriden by a [Theme]. + The default scale factor for [Control]s, when not overridden by a [Theme]. [b]Note:[/b] This property is only read when the project starts. To change the default scale at runtime, set [member ThemeDB.fallback_base_scale] instead. </member> <member name="gui/theme/lcd_subpixel_layout" type="int" setter="" getter="" default="1"> - LCD sub-pixel layout used for font anti-aliasing. See [enum TextServer.FontLCDSubpixelLayout]. + LCD subpixel layout used for font anti-aliasing. See [enum TextServer.FontLCDSubpixelLayout]. </member> <member name="gui/timers/incremental_search_max_interval_msec" type="int" setter="" getter="" default="2000"> Timer setting for incremental search in [Tree], [ItemList], etc. controls (in milliseconds). @@ -829,6 +839,14 @@ [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> <member name="input/ui_swap_input_direction" type="Dictionary" setter="" getter=""> + Default [InputEventAction] to swap input direction, i.e. change between left-to-right to right-to-left modes. Affects text-editting controls ([LineEdit], [TextEdit]). + </member> + <member name="input/ui_text_add_selection_for_next_occurrence" type="Dictionary" setter="" getter=""> + If a selection is currently active with the last caret in text fields, searches for the next occurrence of the selection, adds a caret and selects the next occurrence. + If no selection is currently active with the last caret in text fields, selects the word currently under the caret. + The action can be performed sequentially for all occurrences of the selection of the last caret and for all existing carets. + The viewport is adjusted to the latest newly added caret. + [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> <member name="input/ui_text_backspace" type="Dictionary" setter="" getter=""> Default [InputEventAction] to delete the character before the text cursor. @@ -848,6 +866,18 @@ <member name="input/ui_text_backspace_word.macos" type="Dictionary" setter="" getter=""> macOS specific override for the shortcut to delete a word. </member> + <member name="input/ui_text_caret_add_above" type="Dictionary" setter="" getter=""> + Default [InputEventAction] to add an additional caret above every caret of a text + </member> + <member name="input/ui_text_caret_add_above.macos" type="Dictionary" setter="" getter=""> + macOS specific override for the shortcut to add a caret above every caret + </member> + <member name="input/ui_text_caret_add_below" type="Dictionary" setter="" getter=""> + Default [InputEventAction] to add an additional caret below every caret of a text + </member> + <member name="input/ui_text_caret_add_below.macos" type="Dictionary" setter="" getter=""> + macOS specific override for the shortcut to add a caret below every caret + </member> <member name="input/ui_text_caret_document_end" type="Dictionary" setter="" getter=""> Default [InputEventAction] to move the text cursor the the end of the text. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. @@ -914,6 +944,11 @@ <member name="input/ui_text_caret_word_right.macos" type="Dictionary" setter="" getter=""> macOS specific override for the shortcut to move the text cursor forward one word. </member> + <member name="input/ui_text_clear_carets_and_selection" type="Dictionary" setter="" getter=""> + If there's only one caret active and with a selection, clears the selection. + In case there's more than one caret active, removes the secondary carets and clears their selections. + [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. + </member> <member name="input/ui_text_completion_accept" type="Dictionary" setter="" getter=""> Default [InputEventAction] to accept an autocompetion hint. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. @@ -984,14 +1019,14 @@ </member> <member name="input/ui_text_select_word_under_caret" type="Dictionary" setter="" getter=""> If no selection is currently active, selects the word currently under the caret in text fields. If a selection is currently active, deselects the current selection. - [b]Note:[/b] Currently, this is only implemented in [TextEdit], not [LineEdit]. + [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> <member name="input/ui_text_submit" type="Dictionary" setter="" getter=""> Default [InputEventAction] to submit a text field. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> <member name="input/ui_text_toggle_insert_mode" type="Dictionary" setter="" getter=""> - Default [InputEventAction] to toggle [i]instert mode[/i] in a text field. While in insert mode, inserting new text overrides the character after the cursor, unless the next character is a new line. + Default [InputEventAction] to toggle [i]insert mode[/i] in a text field. While in insert mode, inserting new text overrides the character after the cursor, unless the next character is a new line. [b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are necessary for the internal logic of several [Control]s. The events assigned to the action can however be modified. </member> <member name="input/ui_undo" type="Dictionary" setter="" getter=""> @@ -1010,7 +1045,7 @@ </member> <member name="input_devices/pen_tablet/driver" type="String" setter="" getter=""> Specifies the tablet driver to use. If left empty, the default driver will be used. - [b]Note:[/b] The driver in use can be overridden at runtime via the [code]--tablet-driver[/code] command line argument. + [b]Note:[/b] The driver in use can be overridden at runtime via the [code]--tablet-driver[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url]. </member> <member name="input_devices/pen_tablet/driver.windows" type="String" setter="" getter=""> Override for [member input_devices/pen_tablet/driver] on Windows. @@ -1075,8 +1110,8 @@ <member name="internationalization/rendering/text_driver" type="String" setter="" getter="" default=""""> Specifies the [TextServer] to use. If left empty, the default will be used. "ICU / HarfBuzz / Graphite" is the most advanced text driver, supporting right-to-left typesetting and complex scripts (for languages like Arabic, Hebrew, etc). The "Fallback" text driver does not support right-to-left typesetting and complex scripts. - [b]Note:[/b] The driver in use can be overridden at runtime via the [code]--text-driver[/code] command line argument. - [b]Note:[/b] There is an additional [code]Dummy[/code] text driver available, which disables all text rendering and font-related functionality. This driver is not listed in the project settings, but it can be enabled when running the editor or project using the [code]--text-driver Dummy[/code] command line argument. + [b]Note:[/b] The driver in use can be overridden at runtime via the [code]--text-driver[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url]. + [b]Note:[/b] There is an additional [code]Dummy[/code] text driver available, which disables all text rendering and font-related functionality. This driver is not listed in the project settings, but it can be enabled when running the editor or project using the [code]--text-driver Dummy[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url]. </member> <member name="layer_names/2d_navigation/layer_1" type="String" setter="" getter="" default=""""> Optional name for the 2D navigation layer 1. If left empty, the layer will display as "Layer 1". @@ -1780,6 +1815,10 @@ <member name="physics/common/enable_object_picking" type="bool" setter="" getter="" default="true"> Enables [member Viewport.physics_object_picking] on the root viewport. </member> + <member name="physics/common/max_physics_steps_per_frame" type="int" setter="" getter="" default="8"> + Controls the maximum number of physics steps that can be simulated each rendered frame. The default value is tuned to avoid "spiral of death" situations where expensive physics simulations trigger more expensive simulations indefinitely. However, the game will appear to slow down if the rendering FPS is less than [code]1 / max_physics_steps_per_frame[/code] of [member physics/common/physics_ticks_per_second]. This occurs even if [code]delta[/code] is consistently used in physics calculations. To avoid this, increase [member physics/common/max_physics_steps_per_frame] if you have increased [member physics/common/physics_ticks_per_second] significantly above its default value. + [b]Note:[/b] This property is only read when the project starts. To change the maximum number of simulated physics steps per frame at runtime, set [member Engine.max_physics_steps_per_frame] instead. + </member> <member name="physics/common/physics_jitter_fix" type="float" setter="" getter="" default="0.5"> Controls how much physics ticks are synchronized with real time. For 0 or less, the ticks are synchronized. Such values are recommended for network games, where clock synchronization matters. Higher values cause higher deviation of in-game clock and real clock, but allows smoothing out framerate jitters. The default value of 0.5 should be fine for most; values above 2 could cause the game to react to dropped frames with a noticeable delay and are not recommended. [b]Note:[/b] For best results, when using a custom physics interpolation solution, the physics jitter fix should be disabled by setting [member physics/common/physics_jitter_fix] to [code]0[/code]. @@ -1788,7 +1827,7 @@ <member name="physics/common/physics_ticks_per_second" type="int" setter="" getter="" default="60"> The number of fixed iterations per second. This controls how often physics simulation and [method Node._physics_process] methods are run. See also [member application/run/max_fps]. [b]Note:[/b] This property is only read when the project starts. To change the physics FPS at runtime, set [member Engine.physics_ticks_per_second] instead. - [b]Note:[/b] Only 8 physics ticks may be simulated per rendered frame at most. If more than 8 physics ticks have to be simulated per rendered frame to keep up with rendering, the game will appear to slow down (even if [code]delta[/code] is used consistently in physics calculations). Therefore, it is recommended not to increase [member physics/common/physics_ticks_per_second] above 240. Otherwise, the game will slow down when the rendering framerate goes below 30 FPS. + [b]Note:[/b] Only [member physics/common/max_physics_steps_per_frame] physics ticks may be simulated per rendered frame at most. If more physics ticks have to be simulated per rendered frame to keep up with rendering, the project will appear to slow down (even if [code]delta[/code] is used consistently in physics calculations). Therefore, it is recommended to also increase [member physics/common/max_physics_steps_per_frame] if increasing [member physics/common/physics_ticks_per_second] significantly above its default value. </member> <member name="rendering/2d/sdf/oversize" type="int" setter="" getter="" default="1"> </member> @@ -1811,7 +1850,9 @@ Another way to combat specular aliasing is to enable [member rendering/anti_aliasing/screen_space_roughness_limiter/enabled]. </member> <member name="rendering/anti_aliasing/quality/use_debanding" type="bool" setter="" getter="" default="false"> - If [code]true[/code], uses a fast post-processing dithering filter on the default screen [Viewport] to make banding significantly less visible. In some cases, the dithering pattern may be slightly noticable. Note that this will make losslessly compressed (PNG etc.) screenshots larger. + If [code]true[/code], uses a fast post-processing filter to make banding significantly less visible in 3D. 2D rendering is [i]not[/i] affected by debanding unless the [member Environment.background_mode] is [constant Environment.BG_CANVAS]. + In some cases, debanding may introduce a slightly noticeable dithering pattern. It's recommended to enable debanding only when actually needed since the dithering pattern will make lossless-compressed screenshots larger. + [b]Note:[/b] This property is only read when the project starts. To set debanding at run-time, set [member Viewport.use_debanding] on the root [Viewport] instead. </member> <member name="rendering/anti_aliasing/quality/use_taa" type="bool" setter="" getter="" default="false"> Enables Temporal Anti-Aliasing for the default screen [Viewport]. TAA works by jittering the camera and accumulating the images of the last rendered frames, motion vector rendering is used to account for camera and object motion. Enabling TAA can make the image blurrier, which is partially counteracted by automatically using a negative mipmap LOD bias (see [member rendering/textures/default_filters/texture_mipmap_bias]). @@ -1861,7 +1902,7 @@ Sets the quality for rough screen-space reflections. Turning off will make all screen space reflections sharp, while higher values make rough reflections look better. </member> <member name="rendering/environment/ssao/adaptive_target" type="float" setter="" getter="" default="0.5"> - Quality target to use when [member rendering/environment/ssao/quality] is set to [code]ULTRA[/code]. A value of [code]0.0[/code] provides a quality and speed similar to [code]MEDIUM[/code] while a value of [code]1.0[/code] provides much higher quality than any of the other settings at the cost of performance. + Quality target to use when [member rendering/environment/ssao/quality] is set to [code]Ultra[/code]. A value of [code]0.0[/code] provides a quality and speed similar to [code]Medium[/code] while a value of [code]1.0[/code] provides much higher quality than any of the other settings at the cost of performance. </member> <member name="rendering/environment/ssao/blur_passes" type="int" setter="" getter="" default="2"> Number of blur passes to use when computing screen-space ambient occlusion. A higher number will result in a smoother look, but will be slower to compute and will have less high-frequency detail. @@ -1876,10 +1917,10 @@ If [code]true[/code], screen-space ambient occlusion will be rendered at half size and then upscaled before being added to the scene. This is significantly faster but may miss small details. If [code]false[/code], screen-space ambient occlusion will be rendered at full size. </member> <member name="rendering/environment/ssao/quality" type="int" setter="" getter="" default="2"> - Sets the quality of the screen-space ambient occlusion effect. Higher values take more samples and so will result in better quality, at the cost of performance. Setting to [code]ULTRA[/code] will use the [member rendering/environment/ssao/adaptive_target] setting. + Sets the quality of the screen-space ambient occlusion effect. Higher values take more samples and so will result in better quality, at the cost of performance. Setting to [code]Ultra[/code] will use the [member rendering/environment/ssao/adaptive_target] setting. </member> <member name="rendering/environment/ssil/adaptive_target" type="float" setter="" getter="" default="0.5"> - Quality target to use when [member rendering/environment/ssil/quality] is set to [code]ULTRA[/code]. A value of [code]0.0[/code] provides a quality and speed similar to [code]MEDIUM[/code] while a value of [code]1.0[/code] provides much higher quality than any of the other settings at the cost of performance. When using the adaptive target, the performance cost scales with the complexity of the scene. + Quality target to use when [member rendering/environment/ssil/quality] is set to [code]Ultra[/code]. A value of [code]0.0[/code] provides a quality and speed similar to [code]Medium[/code] while a value of [code]1.0[/code] provides much higher quality than any of the other settings at the cost of performance. When using the adaptive target, the performance cost scales with the complexity of the scene. </member> <member name="rendering/environment/ssil/blur_passes" type="int" setter="" getter="" default="4"> Number of blur passes to use when computing screen-space indirect lighting. A higher number will result in a smoother look, but will be slower to compute and will have less high-frequency detail. @@ -1894,7 +1935,7 @@ If [code]true[/code], screen-space indirect lighting will be rendered at half size and then upscaled before being added to the scene. This is significantly faster but may miss small details and may result in some objects appearing to glow at their edges. </member> <member name="rendering/environment/ssil/quality" type="int" setter="" getter="" default="2"> - Sets the quality of the screen-space indirect lighting effect. Higher values take more samples and so will result in better quality, at the cost of performance. Setting to [code]ULTRA[/code] will use the [member rendering/environment/ssil/adaptive_target] setting. + Sets the quality of the screen-space indirect lighting effect. Higher values take more samples and so will result in better quality, at the cost of performance. Setting to [code]Ultra[/code] will use the [member rendering/environment/ssil/adaptive_target] setting. </member> <member name="rendering/environment/subsurface_scattering/subsurface_scattering_depth_scale" type="float" setter="" getter="" default="0.01"> Scales the depth over which the subsurface scattering effect is applied. A high value may allow light to scatter into a part of the mesh or another mesh that is close in screen space but far in depth. @@ -1983,6 +2024,9 @@ <member name="rendering/lightmapping/bake_quality/ultra_quality_ray_count" type="int" setter="" getter="" default="1024"> The number of rays to use for baking lightmaps with [LightmapGI] when [member LightmapGI.quality] is [constant LightmapGI.BAKE_QUALITY_ULTRA]. </member> + <member name="rendering/lightmapping/primitive_meshes/texel_size" type="float" setter="" getter="" default="0.2"> + The texel_size that is used to calculate the [member Mesh.lightmap_size_hint] on [PrimitiveMesh] resources if [member PrimitiveMesh.add_uv2] is enabled. + </member> <member name="rendering/lightmapping/probe_capture/update_speed" type="float" setter="" getter="" default="15"> The framerate-independent update speed when representing dynamic object lighting from [LightmapProbe]s. Higher values make dynamic object lighting update faster. Higher values can prevent fast-moving objects from having "outdated" indirect lighting displayed on them, at the cost of possible flickering when an object moves from a bright area to a shaded area. </member> @@ -2193,9 +2237,6 @@ <member name="rendering/textures/lossless_compression/force_png" type="bool" setter="" getter="" default="false"> If [code]true[/code], the texture importer will import lossless textures using the PNG format. Otherwise, it will default to using WebP. </member> - <member name="rendering/textures/lossless_compression/webp_compression_level" type="int" setter="" getter="" default="2"> - The default compression level for lossless WebP. Higher levels result in smaller files at the cost of compression speed. Decompression speed is mostly unaffected by the compression level. Supported values are 0 to 9. Note that compression levels above 6 are very slow and offer very little savings. - </member> <member name="rendering/textures/vram_compression/import_bptc" type="bool" setter="" getter="" default="false"> If [code]true[/code], the texture importer will import VRAM-compressed textures using the BPTC algorithm. This texture compression algorithm is only supported on desktop platforms, and only when using the Vulkan renderer. [b]Note:[/b] Changing this setting does [i]not[/i] impact textures that were already imported before. To make this setting apply to textures that were already imported, exit the editor, remove the [code].godot/imported/[/code] folder located inside the project folder then restart the editor (see [member application/config/use_hidden_project_data_directory]). @@ -2212,6 +2253,12 @@ If [code]true[/code], the texture importer will import VRAM-compressed textures using the S3 Texture Compression algorithm. This algorithm is only supported on desktop platforms and consoles. [b]Note:[/b] Changing this setting does [i]not[/i] impact textures that were already imported before. To make this setting apply to textures that were already imported, exit the editor, remove the [code].godot/imported/[/code] folder located inside the project folder then restart the editor (see [member application/config/use_hidden_project_data_directory]). </member> + <member name="rendering/textures/webp_compression/compression_method" type="int" setter="" getter="" default="2"> + The default compression method for WebP. Affects both lossy and lossless WebP. A higher value results in smaller files at the cost of compression speed. Decompression speed is mostly unaffected by the compression method. Supported values are 0 to 6. Note that compression methods above 4 are very slow and offer very little savings. + </member> + <member name="rendering/textures/webp_compression/lossless_compression_factor" type="float" setter="" getter="" default="25"> + The default compression factor for lossless WebP. Decompression speed is mostly unaffected by the compression factor. Supported values are 0 to 100. + </member> <member name="rendering/transparent_background" type="bool" setter="" getter="" default="false"> If [code]true[/code], enables [member Viewport.transparent_bg] on the root viewport. This allows per-pixel transparency to be effective after also enabling [member display/window/size/transparent] and [member display/window/per_pixel_transparency/allowed]. </member> @@ -2219,7 +2266,20 @@ Set the default Variable Rate Shading (VRS) mode for the main viewport. See [member Viewport.vrs_mode] to change this at runtime, and [enum Viewport.VRSMode] for possible values. </member> <member name="rendering/vrs/texture" type="String" setter="" getter="" default=""""> - If [member rendering/vrs/mode] is set to texture, this is the path to default texture loaded as the VRS image. + If [member rendering/vrs/mode] is set to [b]Texture[/b], this is the path to default texture loaded as the VRS image. + The texture [i]must[/i] use a lossless compression format so that colors can be matched precisely. The following VRS densities are mapped to various colors, with brighter colors representing a lower level of shading precision: + [codeblock] + - 1x1 = rgb(0, 0, 0) - #000000 + - 1x2 = rgb(0, 85, 0) - #005500 + - 2x1 = rgb(85, 0, 0) - #550000 + - 2x2 = rgb(85, 85, 0) - #555500 + - 2x4 = rgb(85, 170, 0) - #55aa00 + - 4x2 = rgb(170, 85, 0) - #aa5500 + - 4x4 = rgb(170, 170, 0) - #aaaa00 + - 4x8 = rgb(170, 255, 0) - #aaff00 - Not supported on most hardware + - 8x4 = rgb(255, 170, 0) - #ffaa00 - Not supported on most hardware + - 8x8 = rgb(255, 255, 0) - #ffff00 - Not supported on most hardware + [/codeblock] </member> <member name="threading/worker_pool/low_priority_thread_ratio" type="float" setter="" getter="" default="0.3"> </member> @@ -2231,7 +2291,7 @@ Action map configuration to load by default. </member> <member name="xr/openxr/enabled" type="bool" setter="" getter="" default="false"> - If [code]true[/code] Godot will setup and initialise OpenXR on startup. + If [code]true[/code] Godot will setup and initialize OpenXR on startup. </member> <member name="xr/openxr/form_factor" type="int" setter="" getter="" default=""0""> Specify whether OpenXR should be configured for an HMD or a hand held device. diff --git a/doc/classes/PropertyTweener.xml b/doc/classes/PropertyTweener.xml index 78ead65cdd..61e8357809 100644 --- a/doc/classes/PropertyTweener.xml +++ b/doc/classes/PropertyTweener.xml @@ -13,7 +13,8 @@ <method name="as_relative"> <return type="PropertyTweener" /> <description> - When called, the final value will be used as a relative value instead. Example: + When called, the final value will be used as a relative value instead. + [b]Example:[/b] [codeblock] var tween = get_tree().create_tween() tween.tween_property(self, "position", Vector2.RIGHT * 100, 1).as_relative() #the node will move by 100 pixels to the right @@ -24,7 +25,8 @@ <return type="PropertyTweener" /> <param index="0" name="value" type="Variant" /> <description> - Sets a custom initial value to the [PropertyTweener]. Example: + Sets a custom initial value to the [PropertyTweener]. + [b]Example:[/b] [codeblock] var tween = get_tree().create_tween() tween.tween_property(self, "position", Vector2(200, 100), 1).from(Vector2(100, 100)) #this will move the node from position (100, 100) to (200, 100) diff --git a/doc/classes/Quaternion.xml b/doc/classes/Quaternion.xml index 99dffeff9d..ac2eda9f28 100644 --- a/doc/classes/Quaternion.xml +++ b/doc/classes/Quaternion.xml @@ -43,12 +43,6 @@ </constructor> <constructor name="Quaternion"> <return type="Quaternion" /> - <param index="0" name="euler_yxz" type="Vector3" /> - <description> - </description> - </constructor> - <constructor name="Quaternion"> - <return type="Quaternion" /> <param index="0" name="from" type="Basis" /> <description> Constructs a quaternion from the given [Basis]. @@ -86,6 +80,13 @@ <description> </description> </method> + <method name="from_euler" qualifiers="static"> + <return type="Quaternion" /> + <param index="0" name="euler" type="Vector3" /> + <description> + Constructs a Quaternion from Euler angles in YXZ rotation order. + </description> + </method> <method name="get_angle" qualifiers="const"> <return type="float" /> <description> @@ -98,8 +99,9 @@ </method> <method name="get_euler" qualifiers="const"> <return type="Vector3" /> + <param index="0" name="order" type="int" default="2" /> <description> - Returns Euler angles (in the YXZ convention: when decomposing, first Z, then X, and Y last) corresponding to the rotation represented by the unit quaternion. Returned vector contains the rotation angles in the format (X angle, Y angle, Z angle). + Returns the quaternion's rotation in the form of Euler angles. The Euler order depends on the [param order] parameter, for example using the YXZ convention: since this method decomposes, first Z, then X, and Y last. See the [enum EulerOrder] enum for possible values. The returned vector contains the rotation angles in the format (X angle, Y angle, Z angle). </description> </method> <method name="inverse" qualifiers="const"> diff --git a/doc/classes/RDTextureFormat.xml b/doc/classes/RDTextureFormat.xml index 1b70303d2d..3bfcd610a4 100644 --- a/doc/classes/RDTextureFormat.xml +++ b/doc/classes/RDTextureFormat.xml @@ -35,7 +35,7 @@ </member> <member name="texture_type" type="int" setter="set_texture_type" getter="get_texture_type" enum="RenderingDevice.TextureType" default="1"> </member> - <member name="usage_bits" type="int" setter="set_usage_bits" getter="get_usage_bits" default="0"> + <member name="usage_bits" type="int" setter="set_usage_bits" getter="get_usage_bits" enum="RenderingDevice.TextureUsageBits" default="0"> </member> <member name="width" type="int" setter="set_width" getter="get_width" default="1"> </member> diff --git a/doc/classes/Range.xml b/doc/classes/Range.xml index 16e6e86f9e..2dcfc90955 100644 --- a/doc/classes/Range.xml +++ b/doc/classes/Range.xml @@ -16,6 +16,13 @@ Called when the [Range]'s value is changed (following the same conditions as [signal value_changed]). </description> </method> + <method name="set_value_no_signal"> + <return type="void" /> + <param index="0" name="value" type="float" /> + <description> + Sets the [Range]'s current value to the specified [param value], without emitting the [signal value_changed] signal. + </description> + </method> <method name="share"> <return type="void" /> <param index="0" name="with" type="Node" /> @@ -31,35 +38,36 @@ </method> </methods> <members> - <member name="allow_greater" type="bool" setter="set_allow_greater" getter="is_greater_allowed"> + <member name="allow_greater" type="bool" setter="set_allow_greater" getter="is_greater_allowed" default="false"> If [code]true[/code], [member value] may be greater than [member max_value]. </member> - <member name="allow_lesser" type="bool" setter="set_allow_lesser" getter="is_lesser_allowed"> + <member name="allow_lesser" type="bool" setter="set_allow_lesser" getter="is_lesser_allowed" default="false"> If [code]true[/code], [member value] may be less than [member min_value]. </member> - <member name="exp_edit" type="bool" setter="set_exp_ratio" getter="is_ratio_exp"> + <member name="exp_edit" type="bool" setter="set_exp_ratio" getter="is_ratio_exp" default="false"> If [code]true[/code], and [code]min_value[/code] is greater than 0, [code]value[/code] will be represented exponentially rather than linearly. </member> - <member name="max_value" type="float" setter="set_max" getter="get_max"> + <member name="max_value" type="float" setter="set_max" getter="get_max" default="100.0"> Maximum value. Range is clamped if [code]value[/code] is greater than [code]max_value[/code]. </member> - <member name="min_value" type="float" setter="set_min" getter="get_min"> + <member name="min_value" type="float" setter="set_min" getter="get_min" default="0.0"> Minimum value. Range is clamped if [code]value[/code] is less than [code]min_value[/code]. </member> - <member name="page" type="float" setter="set_page" getter="get_page"> + <member name="page" type="float" setter="set_page" getter="get_page" default="0.0"> Page size. Used mainly for [ScrollBar]. ScrollBar's length is its size multiplied by [code]page[/code] over the difference between [code]min_value[/code] and [code]max_value[/code]. </member> <member name="ratio" type="float" setter="set_as_ratio" getter="get_as_ratio"> The value mapped between 0 and 1. </member> - <member name="rounded" type="bool" setter="set_use_rounded_values" getter="is_using_rounded_values"> + <member name="rounded" type="bool" setter="set_use_rounded_values" getter="is_using_rounded_values" default="false"> If [code]true[/code], [code]value[/code] will always be rounded to the nearest integer. </member> - <member name="step" type="float" setter="set_step" getter="get_step"> + <member name="size_flags_vertical" type="int" setter="set_v_size_flags" getter="get_v_size_flags" overrides="Control" default="0" /> + <member name="step" type="float" setter="set_step" getter="get_step" default="0.01"> If greater than 0, [code]value[/code] will always be rounded to a multiple of [code]step[/code]. If [code]rounded[/code] is also [code]true[/code], [code]value[/code] will first be rounded to a multiple of [code]step[/code] then rounded to the nearest integer. </member> - <member name="value" type="float" setter="set_value" getter="get_value"> - Range's current value. + <member name="value" type="float" setter="set_value" getter="get_value" default="0.0"> + Range's current value. Changing this property (even via code) will trigger [signal value_changed] signal. Use [method set_value_no_signal] if you want to avoid it. </member> </members> <signals> diff --git a/doc/classes/Rect2.xml b/doc/classes/Rect2.xml index 28fe42afae..d39e50d5f0 100644 --- a/doc/classes/Rect2.xml +++ b/doc/classes/Rect2.xml @@ -82,9 +82,9 @@ var rect2 = rect.expand(Vector2(0, -1)) [/gdscript] [csharp] - # position (-3, 2), size (1, 1) + // position (-3, 2), size (1, 1) var rect = new Rect2(new Vector2(-3, 2), new Vector2(1, 1)); - # position (-3, -1), size (3, 4), so we fit both rect and Vector2(0, -1) + // position (-3, -1), size (3, 4), so we fit both rect and Vector2(0, -1) var rect2 = rect.Expand(new Vector2(0, -1)); [/csharp] [/codeblocks] diff --git a/doc/classes/Rect2i.xml b/doc/classes/Rect2i.xml index 6d4c113609..325ead0cfa 100644 --- a/doc/classes/Rect2i.xml +++ b/doc/classes/Rect2i.xml @@ -79,9 +79,9 @@ var rect2 = rect.expand(Vector2i(0, -1)) [/gdscript] [csharp] - # position (-3, 2), size (1, 1) + // position (-3, 2), size (1, 1) var rect = new Rect2i(new Vector2i(-3, 2), new Vector2i(1, 1)); - # position (-3, -1), size (3, 4), so we fit both rect and Vector2i(0, -1) + // position (-3, -1), size (3, 4), so we fit both rect and Vector2i(0, -1) var rect2 = rect.Expand(new Vector2i(0, -1)); [/csharp] [/codeblocks] diff --git a/doc/classes/RenderingDevice.xml b/doc/classes/RenderingDevice.xml index eb85a4adb4..8afe6eb935 100644 --- a/doc/classes/RenderingDevice.xml +++ b/doc/classes/RenderingDevice.xml @@ -9,8 +9,8 @@ <methods> <method name="barrier"> <return type="void" /> - <param index="0" name="from" type="int" default="7" /> - <param index="1" name="to" type="int" default="7" /> + <param index="0" name="from" type="int" enum="RenderingDevice.BarrierMask" default="7" /> + <param index="1" name="to" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -19,7 +19,7 @@ <param index="0" name="buffer" type="RID" /> <param index="1" name="offset" type="int" /> <param index="2" name="size_bytes" type="int" /> - <param index="3" name="post_barrier" type="int" default="7" /> + <param index="3" name="post_barrier" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -35,7 +35,7 @@ <param index="1" name="offset" type="int" /> <param index="2" name="size_bytes" type="int" /> <param index="3" name="data" type="PackedByteArray" /> - <param index="4" name="post_barrier" type="int" default="7" /> + <param index="4" name="post_barrier" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -83,7 +83,7 @@ </method> <method name="compute_list_end"> <return type="void" /> - <param index="0" name="post_barrier" type="int" default="7" /> + <param index="0" name="post_barrier" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -223,7 +223,7 @@ </method> <method name="draw_list_end"> <return type="void" /> - <param index="0" name="post_barrier" type="int" default="7" /> + <param index="0" name="post_barrier" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -232,7 +232,7 @@ <param index="0" name="draw_list" type="int" /> <param index="1" name="color" type="Color" /> <description> - Sets blend constants for draw list, blend constants are used only if the graphics pipeline is created with [code]DYNAMIC_STATE_BLEND_CONSTANTS[/code] flag set. + Sets blend constants for draw list, blend constants are used only if the graphics pipeline is created with [constant DYNAMIC_STATE_BLEND_CONSTANTS] flag set. </description> </method> <method name="draw_list_set_push_constant"> @@ -534,7 +534,7 @@ <param index="3" name="mipmap_count" type="int" /> <param index="4" name="base_layer" type="int" /> <param index="5" name="layer_count" type="int" /> - <param index="6" name="post_barrier" type="int" default="7" /> + <param index="6" name="post_barrier" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -549,7 +549,7 @@ <param index="6" name="dst_mipmap" type="int" /> <param index="7" name="src_layer" type="int" /> <param index="8" name="dst_layer" type="int" /> - <param index="9" name="post_barrier" type="int" default="7" /> + <param index="9" name="post_barrier" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -589,7 +589,7 @@ <method name="texture_is_format_supported_for_usage" qualifiers="const"> <return type="bool" /> <param index="0" name="format" type="int" enum="RenderingDevice.DataFormat" /> - <param index="1" name="usage_flags" type="int" /> + <param index="1" name="usage_flags" type="int" enum="RenderingDevice.TextureUsageBits" /> <description> </description> </method> @@ -609,7 +609,7 @@ <return type="int" enum="Error" /> <param index="0" name="from_texture" type="RID" /> <param index="1" name="to_texture" type="RID" /> - <param index="2" name="post_barrier" type="int" default="7" /> + <param index="2" name="post_barrier" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -618,7 +618,7 @@ <param index="0" name="texture" type="RID" /> <param index="1" name="layer" type="int" /> <param index="2" name="data" type="PackedByteArray" /> - <param index="3" name="post_barrier" type="int" default="7" /> + <param index="3" name="post_barrier" type="int" enum="RenderingDevice.BarrierMask" default="7" /> <description> </description> </method> @@ -643,6 +643,16 @@ <description> </description> </method> + <method name="vertex_array_create"> + <return type="RID" /> + <param index="0" name="vertex_count" type="int" /> + <param index="1" name="vertex_format" type="int" /> + <param index="2" name="src_buffers" type="RID[]" /> + <param index="3" name="offsets" type="PackedInt64Array" default="PackedInt64Array()" /> + <description> + Creates a vertex array based on the specified buffers. Optionally, [param offsets] (in bytes) may be defined for each buffer. + </description> + </method> <method name="vertex_buffer_create"> <return type="RID" /> <param index="0" name="size_bytes" type="int" /> @@ -659,16 +669,6 @@ </method> </methods> <constants> - <constant name="BARRIER_MASK_RASTER" value="1"> - </constant> - <constant name="BARRIER_MASK_COMPUTE" value="2"> - </constant> - <constant name="BARRIER_MASK_TRANSFER" value="4"> - </constant> - <constant name="BARRIER_MASK_ALL" value="7"> - </constant> - <constant name="BARRIER_MASK_NO_BARRIER" value="8"> - </constant> <constant name="DEVICE_TYPE_OTHER" value="0" enum="DeviceType"> Rendering device type does not match any of the other enum values or is unknown. </constant> @@ -1151,6 +1151,16 @@ </constant> <constant name="DATA_FORMAT_MAX" value="218" enum="DataFormat"> </constant> + <constant name="BARRIER_MASK_RASTER" value="1" enum="BarrierMask" is_bitfield="true"> + </constant> + <constant name="BARRIER_MASK_COMPUTE" value="2" enum="BarrierMask" is_bitfield="true"> + </constant> + <constant name="BARRIER_MASK_TRANSFER" value="4" enum="BarrierMask" is_bitfield="true"> + </constant> + <constant name="BARRIER_MASK_ALL_BARRIERS" value="7" enum="BarrierMask" is_bitfield="true"> + </constant> + <constant name="BARRIER_MASK_NO_BARRIER" value="8" enum="BarrierMask" is_bitfield="true"> + </constant> <constant name="TEXTURE_TYPE_1D" value="0" enum="TextureType"> </constant> <constant name="TEXTURE_TYPE_2D" value="1" enum="TextureType"> @@ -1183,25 +1193,25 @@ </constant> <constant name="TEXTURE_SAMPLES_MAX" value="7" enum="TextureSamples"> </constant> - <constant name="TEXTURE_USAGE_SAMPLING_BIT" value="1" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_SAMPLING_BIT" value="1" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_COLOR_ATTACHMENT_BIT" value="2" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_COLOR_ATTACHMENT_BIT" value="2" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT" value="4" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT" value="4" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_STORAGE_BIT" value="8" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_STORAGE_BIT" value="8" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_STORAGE_ATOMIC_BIT" value="16" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_STORAGE_ATOMIC_BIT" value="16" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_CPU_READ_BIT" value="32" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_CPU_READ_BIT" value="32" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_CAN_UPDATE_BIT" value="64" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_CAN_UPDATE_BIT" value="64" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_CAN_COPY_FROM_BIT" value="128" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_CAN_COPY_FROM_BIT" value="128" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_CAN_COPY_TO_BIT" value="256" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_CAN_COPY_TO_BIT" value="256" enum="TextureUsageBits" is_bitfield="true"> </constant> - <constant name="TEXTURE_USAGE_INPUT_ATTACHMENT_BIT" value="512" enum="TextureUsageBits"> + <constant name="TEXTURE_USAGE_INPUT_ATTACHMENT_BIT" value="512" enum="TextureUsageBits" is_bitfield="true"> </constant> <constant name="TEXTURE_SWIZZLE_IDENTITY" value="0" enum="TextureSwizzle"> </constant> @@ -1581,6 +1591,10 @@ </constant> <constant name="LIMIT_MAX_COMPUTE_WORKGROUP_SIZE_Z" value="34" enum="Limit"> </constant> + <constant name="LIMIT_MAX_VIEWPORT_DIMENSIONS_X" value="35" enum="Limit"> + </constant> + <constant name="LIMIT_MAX_VIEWPORT_DIMENSIONS_Y" value="36" enum="Limit"> + </constant> <constant name="MEMORY_TEXTURES" value="0" enum="MemoryType"> </constant> <constant name="MEMORY_BUFFERS" value="1" enum="MemoryType"> diff --git a/doc/classes/RenderingServer.xml b/doc/classes/RenderingServer.xml index 6aa9237385..2ffa4dc50b 100644 --- a/doc/classes/RenderingServer.xml +++ b/doc/classes/RenderingServer.xml @@ -13,6 +13,7 @@ Similarly, in 2D, a canvas is needed to draw all canvas items. In 3D, all visible objects are comprised of a resource and an instance. A resource can be a mesh, a particle system, a light, or any other 3D object. In order to be visible resources must be attached to an instance using [method instance_set_base]. The instance must also be attached to the scenario using [method instance_set_scenario] in order to be visible. In 2D, all visible objects are some form of canvas item. In order to be visible, a canvas item needs to be the child of a canvas attached to a viewport, or it needs to be the child of another canvas item that is eventually attached to the canvas. + [b]Headless mode:[/b] Starting the engine with the [code]--headless[/code] [url=$DOCS_URL/tutorials/editor/command_line_tutorial.html]command line argument[/url] disables all rendering and window management functions. Most functions from [RenderingServer] will return dummy values in this case. </description> <tutorials> <link title="Optimization using Servers">$DOCS_URL/tutorials/performance/using_servers.html</link> @@ -498,6 +499,14 @@ Sets if the [CanvasItem] uses its parent's material. </description> </method> + <method name="canvas_item_set_visibility_layer"> + <return type="void" /> + <param index="0" name="item" type="RID" /> + <param index="1" name="visibility_layer" type="int" /> + <description> + Sets the rendering visibility layer associated with this [CanvasItem]. Only [Viewport] nodes with a matching rendering mask will render this [CanvasItem]. + </description> + </method> <method name="canvas_item_set_visibility_notifier"> <return type="void" /> <param index="0" name="item" type="RID" /> @@ -829,6 +838,8 @@ <method name="create_local_rendering_device" qualifiers="const"> <return type="RenderingDevice" /> <description> + Creates a RenderingDevice that can be used to do draw and compute operations on a separate thread. Cannot draw to the screen nor share data with the global RenderingDevice. + [b]Note:[/b] When using the OpenGL backend or when running in headless mode, this function always returns [code]null[/code]. </description> </method> <method name="decal_create"> @@ -1264,6 +1275,8 @@ <method name="get_rendering_device" qualifiers="const"> <return type="RenderingDevice" /> <description> + Returns the global RenderingDevice. + [b]Note:[/b] When using the OpenGL backend or when running in headless mode, this function always returns [code]null[/code]. </description> </method> <method name="get_rendering_info"> @@ -3015,6 +3028,14 @@ <description> </description> </method> + <method name="texture_get_rd_texture" qualifiers="const"> + <return type="RID" /> + <param index="0" name="texture" type="RID" /> + <param index="1" name="srgb" type="bool" default="false" /> + <description> + Returns a texture [RID] that can be used with [RenderingDevice]. + </description> + </method> <method name="texture_proxy_create"> <return type="RID" /> <param index="0" name="base" type="RID" /> @@ -3142,6 +3163,14 @@ If [code]true[/code], sets the viewport active, else sets it inactive. </description> </method> + <method name="viewport_set_canvas_cull_mask"> + <return type="void" /> + <param index="0" name="viewport" type="RID" /> + <param index="1" name="canvas_cull_mask" type="int" /> + <description> + Sets the rendering mask associated with this [Viewport]. Only [CanvasItem] nodes with a matching rendering visibility layer will be rendered by this [Viewport]. + </description> + </method> <method name="viewport_set_canvas_stacking"> <return type="void" /> <param index="0" name="viewport" type="RID" /> @@ -4576,9 +4605,11 @@ </constant> <constant name="CANVAS_GROUP_MODE_DISABLED" value="0" enum="CanvasGroupMode"> </constant> - <constant name="CANVAS_GROUP_MODE_OPAQUE" value="1" enum="CanvasGroupMode"> + <constant name="CANVAS_GROUP_MODE_CLIP_ONLY" value="1" enum="CanvasGroupMode"> + </constant> + <constant name="CANVAS_GROUP_MODE_CLIP_AND_DRAW" value="2" enum="CanvasGroupMode"> </constant> - <constant name="CANVAS_GROUP_MODE_TRANSPARENT" value="2" enum="CanvasGroupMode"> + <constant name="CANVAS_GROUP_MODE_TRANSPARENT" value="3" enum="CanvasGroupMode"> </constant> <constant name="CANVAS_LIGHT_MODE_POINT" value="0" enum="CanvasLightMode"> </constant> diff --git a/doc/classes/Resource.xml b/doc/classes/Resource.xml index b2b8a37e39..e533fc1e32 100644 --- a/doc/classes/Resource.xml +++ b/doc/classes/Resource.xml @@ -24,7 +24,7 @@ <param index="0" name="subresources" type="bool" default="false" /> <description> Duplicates this resource, returning a new resource with its [code]export[/code]ed or [constant PROPERTY_USAGE_STORAGE] properties copied from the original. - If [param subresources] is [code]false[/code], a shallow copy is returned. Nested resources within subresources are not duplicated and are shared from the original resource. This behavior can be overriden by the [constant PROPERTY_USAGE_DO_NOT_SHARE_ON_DUPLICATE] flag. + If [param subresources] is [code]false[/code], a shallow copy is returned. Nested resources within subresources are not duplicated and are shared from the original resource. This behavior can be overridden by the [constant PROPERTY_USAGE_DO_NOT_SHARE_ON_DUPLICATE] flag. [b]Note:[/b] For custom resources, this method will fail if [method Object._init] has been defined with required parameters. </description> </method> @@ -51,7 +51,7 @@ <method name="get_rid" qualifiers="const"> <return type="RID" /> <description> - Returns the [RID] of this resource (or an empty RID). Many resources (such as [Texture2D], [Mesh], and so on) are high-level abstractions of resources stored in a specialised server ([DisplayServer], [RenderingServer], etc.), so this function will return the original [RID]. + Returns the [RID] of this resource (or an empty RID). Many resources (such as [Texture2D], [Mesh], and so on) are high-level abstractions of resources stored in a specialized server ([DisplayServer], [RenderingServer], etc.), so this function will return the original [RID]. </description> </method> <method name="setup_local_to_scene"> diff --git a/doc/classes/ResourceFormatSaver.xml b/doc/classes/ResourceFormatSaver.xml index 05bfcf3446..1f2af6d157 100644 --- a/doc/classes/ResourceFormatSaver.xml +++ b/doc/classes/ResourceFormatSaver.xml @@ -24,6 +24,15 @@ Returns whether the given resource object can be saved by this saver. </description> </method> + <method name="_recognize_path" qualifiers="virtual const"> + <return type="bool" /> + <param index="0" name="resource" type="Resource" /> + <param index="1" name="path" type="String" /> + <description> + Returns [code]true[/code] if this saver handles a given save path and [code]false[/code] otherwise. + If this method is not implemented, the default behavior returns whether the path's extension is within the ones provided by [method _get_recognized_extensions]. + </description> + </method> <method name="_save" qualifiers="virtual"> <return type="int" /> <param index="0" name="resource" type="Resource" /> diff --git a/doc/classes/RichTextLabel.xml b/doc/classes/RichTextLabel.xml index b5a917b2bb..cb2481f705 100644 --- a/doc/classes/RichTextLabel.xml +++ b/doc/classes/RichTextLabel.xml @@ -479,9 +479,6 @@ <member name="meta_underlined" type="bool" setter="set_meta_underline" getter="is_meta_underlined" default="true"> If [code]true[/code], the label underlines meta tags such as [code][url]{text}[/url][/code]. </member> - <member name="override_selected_font_color" type="bool" setter="set_override_selected_font_color" getter="is_overriding_selected_font_color" default="false"> - If [code]true[/code], the label uses the custom font color. - </member> <member name="progress_bar_delay" type="int" setter="set_progress_bar_delay" getter="get_progress_bar_delay" default="1000"> The delay after which the loading progress bar is displayed, in milliseconds. Set to [code]-1[/code] to disable progress bar entirely. [b]Note:[/b] Progress bar is displayed only if [member threaded] is enabled. @@ -629,8 +626,8 @@ <theme_item name="font_outline_color" data_type="color" type="Color" default="Color(1, 1, 1, 1)"> The default tint of text outline. </theme_item> - <theme_item name="font_selected_color" data_type="color" type="Color" default="Color(0, 0, 0, 1)"> - The color of selected text, used when [member selection_enabled] is [code]true[/code]. + <theme_item name="font_selected_color" data_type="color" type="Color" default="Color(0, 0, 0, 0)"> + The color of selected text, used when [member selection_enabled] is [code]true[/code]. If equal to [code]Color(0, 0, 0, 0)[/code], it will be ignored. </theme_item> <theme_item name="font_shadow_color" data_type="color" type="Color" default="Color(0, 0, 0, 0)"> The color of the font's shadow. @@ -668,6 +665,12 @@ <theme_item name="table_v_separation" data_type="constant" type="int" default="3"> The vertical separation of elements in a table. </theme_item> + <theme_item name="text_highlight_h_padding" data_type="constant" type="int" default="3"> + The horizontal padding around a highlighting and background color box. + </theme_item> + <theme_item name="text_highlight_v_padding" data_type="constant" type="int" default="3"> + The vertical padding around a highlighting and background color box. + </theme_item> <theme_item name="bold_font" data_type="font" type="Font"> The font used for bold text. </theme_item> diff --git a/doc/classes/RigidBody2D.xml b/doc/classes/RigidBody2D.xml index 9eedc3a24c..6e3535f14a 100644 --- a/doc/classes/RigidBody2D.xml +++ b/doc/classes/RigidBody2D.xml @@ -87,6 +87,7 @@ <param index="0" name="torque" type="float" /> <description> Applies a rotational force without affecting position. A force is time dependent and meant to be applied every physics update. + [b]Note:[/b] [member inertia] is required for this to work. To have [member inertia], an active [CollisionShape2D] must be a child of the node, or you can manually set [member inertia]. </description> </method> <method name="apply_torque_impulse"> @@ -95,6 +96,7 @@ <description> Applies a rotational impulse to the body without affecting the position. An impulse is time-independent! Applying an impulse every frame would result in a framerate-dependent force. For this reason, it should only be used when simulating one-time impacts (use the "_force" functions otherwise). + [b]Note:[/b] [member inertia] is required for this to work. To have [member inertia], an active [CollisionShape2D] must be a child of the node, or you can manually set [member inertia]. </description> </method> <method name="get_colliding_bodies" qualifiers="const"> diff --git a/doc/classes/RigidBody3D.xml b/doc/classes/RigidBody3D.xml index 3ee3f25df1..8380d56de3 100644 --- a/doc/classes/RigidBody3D.xml +++ b/doc/classes/RigidBody3D.xml @@ -87,6 +87,7 @@ <param index="0" name="torque" type="Vector3" /> <description> Applies a rotational force without affecting position. A force is time dependent and meant to be applied every physics update. + [b]Note:[/b] [member inertia] is required for this to work. To have [member inertia], an active [CollisionShape3D] must be a child of the node, or you can manually set [member inertia]. </description> </method> <method name="apply_torque_impulse"> @@ -95,6 +96,7 @@ <description> Applies a rotational impulse to the body without affecting the position. An impulse is time-independent! Applying an impulse every frame would result in a framerate-dependent force. For this reason, it should only be used when simulating one-time impacts (use the "_force" functions otherwise). + [b]Note:[/b] [member inertia] is required for this to work. To have [member inertia], an active [CollisionShape3D] must be a child of the node, or you can manually set [member inertia]. </description> </method> <method name="get_colliding_bodies" qualifiers="const"> diff --git a/doc/classes/ScrollBar.xml b/doc/classes/ScrollBar.xml index d0dd69408e..247e892c24 100644 --- a/doc/classes/ScrollBar.xml +++ b/doc/classes/ScrollBar.xml @@ -12,6 +12,7 @@ <member name="custom_step" type="float" setter="set_custom_step" getter="get_custom_step" default="-1.0"> Overrides the step used when clicking increment and decrement buttons or when using arrow keys when the [ScrollBar] is focused. </member> + <member name="step" type="float" setter="set_step" getter="get_step" overrides="Range" default="0.0" /> </members> <signals> <signal name="scrolling"> diff --git a/doc/classes/ScrollContainer.xml b/doc/classes/ScrollContainer.xml index f5018c25ff..af39261e81 100644 --- a/doc/classes/ScrollContainer.xml +++ b/doc/classes/ScrollContainer.xml @@ -6,7 +6,7 @@ <description> A ScrollContainer node meant to contain a [Control] child. ScrollContainers will automatically create a scrollbar child ([HScrollBar], [VScrollBar], or both) when needed and will only draw the Control within the ScrollContainer area. Scrollbars will automatically be drawn at the right (for vertical) or bottom (for horizontal) and will enable dragging to move the viewable Control (and its children) within the ScrollContainer. Scrollbars will also automatically resize the grabber based on the [member Control.custom_minimum_size] of the Control relative to the ScrollContainer. - Works great with a [Panel] control. You can set [code]EXPAND[/code] on the children's size flags, so they will upscale to the ScrollContainer's size if it's larger (scroll is invisible for the chosen dimension). + Works great with a [Panel] control. You can set [constant Control.SIZE_EXPAND] on the children's size flags, so they will upscale to the ScrollContainer's size if it's larger (scroll is invisible for the chosen dimension). </description> <tutorials> <link title="GUI containers">$DOCS_URL/tutorials/ui/gui_containers.html</link> @@ -49,6 +49,7 @@ Controls whether horizontal scrollbar can be used and when it should be visible. See [enum ScrollMode] for options. </member> <member name="scroll_deadzone" type="int" setter="set_deadzone" getter="get_deadzone" default="0"> + Deadzone for touch scrolling. Lower deadzone makes the scrolling more sensitive. </member> <member name="scroll_horizontal" type="int" setter="set_h_scroll" getter="get_h_scroll" default="0"> The current horizontal scroll value. diff --git a/doc/classes/ShapeCast2D.xml b/doc/classes/ShapeCast2D.xml index 36c3beecb1..5a8eec3921 100644 --- a/doc/classes/ShapeCast2D.xml +++ b/doc/classes/ShapeCast2D.xml @@ -58,6 +58,13 @@ Returns the collided [Object] of one of the multiple collisions at [param index], or [code]null[/code] if no object is intersecting the shape (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> + <method name="get_collider_rid" qualifiers="const"> + <return type="RID" /> + <param index="0" name="index" type="int" /> + <description> + Returns the [RID] of the collided object of one of the multiple collisions at [param index]. + </description> + </method> <method name="get_collider_shape" qualifiers="const"> <return type="int" /> <param index="0" name="index" type="int" /> diff --git a/doc/classes/ShapeCast3D.xml b/doc/classes/ShapeCast3D.xml index cbdf660133..735b91cee9 100644 --- a/doc/classes/ShapeCast3D.xml +++ b/doc/classes/ShapeCast3D.xml @@ -58,6 +58,13 @@ Returns the collided [Object] of one of the multiple collisions at [param index], or [code]null[/code] if no object is intersecting the shape (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> + <method name="get_collider_rid" qualifiers="const"> + <return type="RID" /> + <param index="0" name="index" type="int" /> + <description> + Returns the [RID] of the collided object of one of the multiple collisions at [param index]. + </description> + </method> <method name="get_collider_shape" qualifiers="const"> <return type="int" /> <param index="0" name="index" type="int" /> diff --git a/doc/classes/Signal.xml b/doc/classes/Signal.xml index d99477ee95..3412cd2140 100644 --- a/doc/classes/Signal.xml +++ b/doc/classes/Signal.xml @@ -1,9 +1,29 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="Signal" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> - Class representing a signal defined in an object. + Built-in type representing a signal defined in an object. </brief_description> <description> + [Signal] is a built-in [Variant] type that represents a signal of an [Object] instance. Like all [Variant] types, it can be stored in variables and passed to functions. Signals allow all connected [Callable]s (and by extension their respective objects) to listen and react to events, without directly referencing one another. This keeps the code flexible and easier to manage. + In GDScript, signals can be declared with the [code]signal[/code] keyword. In C#, you may use the [code][Signal][/code] attribute on a delegate. + [codeblocks] + [gdscript] + signal attacked + + # Additional arguments may be declared. + # These arguments must be passed when the signal is emitted. + signal item_dropped(item_name, amount) + [/gdscript] + [csharp] + [Signal] + delegate void Attacked(); + + // Additional arguments may be declared. + // These arguments must be passed when the signal is emitted. + [Signal] + delegate void ItemDropped(itemName: string, amount: int); + [/csharp] + [/codeblocks] </description> <tutorials> <link title="Using Signals">$DOCS_URL/getting_started/step_by_step/signals.html</link> @@ -13,7 +33,7 @@ <constructor name="Signal"> <return type="Signal" /> <description> - Constructs a null [Signal] with no object nor signal name bound. + Constructs an empty [Signal] with no object nor signal name bound. </description> </constructor> <constructor name="Signal"> @@ -28,7 +48,7 @@ <param index="0" name="object" type="Object" /> <param index="1" name="signal" type="StringName" /> <description> - Creates a new [Signal] with the name [param signal] in the specified [param object]. + Creates a new [Signal] named [param signal] in the specified [param object]. </description> </constructor> </constructors> @@ -38,12 +58,13 @@ <param index="0" name="callable" type="Callable" /> <param index="1" name="flags" type="int" default="0" /> <description> - Connects this signal to the specified [Callable], optionally providing connection flags. You can provide additional arguments to the connected method call by using [method Callable.bind]. + Connects this signal to the specified [param callable]. Optional [param flags] can be also added to configure the connection's behavior (see [enum Object.ConnectFlags] constants). You can provide additional arguments to the connected [param callable] by using [method Callable.bind]. + A signal can only be connected once to the same [Callable]. If the signal is already connected, returns [constant ERR_INVALID_PARAMETER] and pushes an error message, unless the signal is connected with [constant Object.CONNECT_REFERENCE_COUNTED]. To prevent this, use [method is_connected] first to check for existing connections. [codeblock] for button in $Buttons.get_children(): - button.pressed.connect(on_pressed.bind(button)) + button.pressed.connect(_on_pressed.bind(button)) - func on_pressed(button): + func _on_pressed(button): print(button.name, " was pressed") [/codeblock] </description> @@ -52,13 +73,13 @@ <return type="void" /> <param index="0" name="callable" type="Callable" /> <description> - Disconnects this signal from the specified [Callable]. + Disconnects this signal from the specified [Callable]. If the connection does not exist, generates an error. Use [method is_connected] to make sure that the connection exists. </description> </method> <method name="emit" qualifiers="vararg const"> <return type="void" /> <description> - Emits this signal to all connected objects. + Emits this signal. All [Callable]s connected to this signal will be triggered. This method supports a variable number of arguments, so parameters can be passed as a comma separated list. </description> </method> <method name="get_connections" qualifiers="const"> @@ -95,6 +116,7 @@ <method name="is_null" qualifiers="const"> <return type="bool" /> <description> + Returns [code]true[/code] if the signal's name does not exist in its object, or the object is not valid. </description> </method> </methods> @@ -103,12 +125,14 @@ <return type="bool" /> <param index="0" name="right" type="Signal" /> <description> + Returns [code]true[/code] if the signals do not share the same object and name. </description> </operator> <operator name="operator =="> <return type="bool" /> <param index="0" name="right" type="Signal" /> <description> + Returns [code]true[/code] if both signals share the same object and name. </description> </operator> </operators> diff --git a/doc/classes/Slider.xml b/doc/classes/Slider.xml index c3dbd69e59..cecca0a5fb 100644 --- a/doc/classes/Slider.xml +++ b/doc/classes/Slider.xml @@ -13,9 +13,11 @@ <member name="editable" type="bool" setter="set_editable" getter="is_editable" default="true"> If [code]true[/code], the slider can be interacted with. If [code]false[/code], the value can be changed only by code. </member> + <member name="focus_mode" type="int" setter="set_focus_mode" getter="get_focus_mode" overrides="Control" enum="Control.FocusMode" default="2" /> <member name="scrollable" type="bool" setter="set_scrollable" getter="is_scrollable" default="true"> If [code]true[/code], the value can be changed using the mouse wheel. </member> + <member name="step" type="float" setter="set_step" getter="get_step" overrides="Range" default="1.0" /> <member name="tick_count" type="int" setter="set_ticks" getter="get_ticks" default="0"> Number of ticks displayed on the slider, including border ticks. Ticks are uniformly-distributed value markers. </member> diff --git a/doc/classes/SpinBox.xml b/doc/classes/SpinBox.xml index 8df039794a..7d63747bd2 100644 --- a/doc/classes/SpinBox.xml +++ b/doc/classes/SpinBox.xml @@ -46,6 +46,7 @@ </methods> <members> <member name="alignment" type="int" setter="set_horizontal_alignment" getter="get_horizontal_alignment" enum="HorizontalAlignment" default="0"> + Changes the alignment of the underlying [LineEdit]. </member> <member name="custom_arrow_step" type="float" setter="set_custom_arrow_step" getter="get_custom_arrow_step" default="0.0"> If not [code]0[/code], [code]value[/code] will always be rounded to a multiple of [code]custom_arrow_step[/code] when interacting with the arrow buttons of the [SpinBox]. @@ -56,6 +57,11 @@ <member name="prefix" type="String" setter="set_prefix" getter="get_prefix" default=""""> Adds the specified [code]prefix[/code] string before the numerical value of the [SpinBox]. </member> + <member name="select_all_on_focus" type="bool" setter="set_select_all_on_focus" getter="is_select_all_on_focus" default="false"> + If [code]true[/code], the [SpinBox] will select the whole text when the [LineEdit] gains focus. Clicking the up and down arrows won't trigger this behavior. + </member> + <member name="size_flags_vertical" type="int" setter="set_v_size_flags" getter="get_v_size_flags" overrides="Control" default="1" /> + <member name="step" type="float" setter="set_step" getter="get_step" overrides="Range" default="1.0" /> <member name="suffix" type="String" setter="set_suffix" getter="get_suffix" default=""""> Adds the specified [code]suffix[/code] string after the numerical value of the [SpinBox]. </member> diff --git a/doc/classes/SpotLight3D.xml b/doc/classes/SpotLight3D.xml index 62cb55daec..28e2ef0d95 100644 --- a/doc/classes/SpotLight3D.xml +++ b/doc/classes/SpotLight3D.xml @@ -14,6 +14,7 @@ <member name="shadow_bias" type="float" setter="set_param" getter="get_param" overrides="Light3D" default="0.03" /> <member name="spot_angle" type="float" setter="set_param" getter="get_param" default="45.0"> The spotlight's angle in degrees. + [b]Note:[/b] [member spot_angle] is not affected by [member Node3D.scale] (the light's scale or its parent's scale). </member> <member name="spot_angle_attenuation" type="float" setter="set_param" getter="get_param" default="1.0"> The spotlight's angular attenuation curve. @@ -23,6 +24,7 @@ </member> <member name="spot_range" type="float" setter="set_param" getter="get_param" default="5.0"> The maximal range that can be reached by the spotlight. Note that the effectively lit area may appear to be smaller depending on the [member spot_attenuation] in use. No matter the [member spot_attenuation] in use, the light will never reach anything outside this range. + [b]Note:[/b] [member spot_range] is not affected by [member Node3D.scale] (the light's scale or its parent's scale). </member> </members> </class> diff --git a/doc/classes/Sprite2D.xml b/doc/classes/Sprite2D.xml index 83532721b2..235fef0bdd 100644 --- a/doc/classes/Sprite2D.xml +++ b/doc/classes/Sprite2D.xml @@ -13,7 +13,8 @@ <method name="get_rect" qualifiers="const"> <return type="Rect2" /> <description> - Returns a [Rect2] representing the Sprite2D's boundary in local coordinates. Can be used to detect if the Sprite2D was clicked. Example: + Returns a [Rect2] representing the Sprite2D's boundary in local coordinates. Can be used to detect if the Sprite2D was clicked. + [b]Example:[/b] [codeblocks] [gdscript] func _input(event): diff --git a/doc/classes/Sprite3D.xml b/doc/classes/Sprite3D.xml index 956e646702..01671aa04e 100644 --- a/doc/classes/Sprite3D.xml +++ b/doc/classes/Sprite3D.xml @@ -19,6 +19,7 @@ The number of columns in the sprite sheet. </member> <member name="region_enabled" type="bool" setter="set_region_enabled" getter="is_region_enabled" default="false"> + If [code]true[/code], the sprite will use [member region_rect] and display only the specified part of its texture. </member> <member name="region_rect" type="Rect2" setter="set_region_rect" getter="get_region_rect" default="Rect2(0, 0, 0, 0)"> The region of the atlas texture to display. [member region_enabled] must be [code]true[/code]. diff --git a/doc/classes/StandardMaterial3D.xml b/doc/classes/StandardMaterial3D.xml index bd6e5cdfa2..0f6a3168eb 100644 --- a/doc/classes/StandardMaterial3D.xml +++ b/doc/classes/StandardMaterial3D.xml @@ -4,7 +4,7 @@ Physically based rendering (PBR) material that can be applied to 3D objects. </brief_description> <description> - StandardMaterial3D's properties are inherited from [BaseMaterial3D]. + [StandardMaterial3D]'s properties are inherited from [BaseMaterial3D]. [StandardMaterial3D] uses separate textures for ambient occlusion, roughness and metallic maps. To use a single ORM map for all 3 textures, use an [ORMMaterial3D] instead. </description> <tutorials> <link title="Standard Material 3D and ORM Material 3D">$DOCS_URL/tutorials/3d/standard_material_3d.html</link> diff --git a/doc/classes/StreamPeer.xml b/doc/classes/StreamPeer.xml index 4188563695..f05b5f7dbf 100644 --- a/doc/classes/StreamPeer.xml +++ b/doc/classes/StreamPeer.xml @@ -44,7 +44,7 @@ <return type="Array" /> <param index="0" name="bytes" type="int" /> <description> - Returns a chunk data with the received bytes. The number of bytes to be received can be requested in the [param bytes] argument. If not enough bytes are available, the function will block until the desired amount is received. This function returns two values, an [enum @GlobalScope.Error] code and a data array. + Returns a chunk data with the received bytes. The number of bytes to be received can be requested in the [param bytes] argument. If not enough bytes are available, the function will block until the desired amount is received. This function returns two values, an [enum Error] code and a data array. </description> </method> <method name="get_double"> @@ -63,7 +63,7 @@ <return type="Array" /> <param index="0" name="bytes" type="int" /> <description> - Returns a chunk data with the received bytes. The number of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will return how many were actually received. This function returns two values, an [enum @GlobalScope.Error] code, and a data array. + Returns a chunk data with the received bytes. The number of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will return how many were actually received. This function returns two values, an [enum Error] code, and a data array. </description> </method> <method name="get_string"> @@ -144,7 +144,7 @@ <return type="int" enum="Error" /> <param index="0" name="data" type="PackedByteArray" /> <description> - Sends a chunk of data through the connection, blocking if necessary until the data is done sending. This function returns an [enum @GlobalScope.Error] code. + Sends a chunk of data through the connection, blocking if necessary until the data is done sending. This function returns an [enum Error] code. </description> </method> <method name="put_double"> @@ -165,7 +165,7 @@ <return type="Array" /> <param index="0" name="data" type="PackedByteArray" /> <description> - Sends a chunk of data through the connection. If all the data could not be sent at once, only part of it will. This function returns two values, an [enum @GlobalScope.Error] code and an integer, describing how much data was actually sent. + Sends a chunk of data through the connection. If all the data could not be sent at once, only part of it will. This function returns two values, an [enum Error] code and an integer, describing how much data was actually sent. </description> </method> <method name="put_string"> diff --git a/doc/classes/String.xml b/doc/classes/String.xml index 320b9fd737..c186952c74 100644 --- a/doc/classes/String.xml +++ b/doc/classes/String.xml @@ -27,14 +27,14 @@ <return type="String" /> <param index="0" name="from" type="NodePath" /> <description> - Constructs a new String from the given [NodePath]. + Constructs a new [String] from the given [NodePath]. </description> </constructor> <constructor name="String"> <return type="String" /> <param index="0" name="from" type="StringName" /> <description> - Constructs a new String from the given [StringName]. + Constructs a new [String] from the given [StringName]. </description> </constructor> </constructors> @@ -51,7 +51,7 @@ <description> Returns an array containing the bigrams (pairs of consecutive letters) of this string. [codeblock] - print("Bigrams".bigrams()) # Prints "[Bi, ig, gr, ra, am, ms]" + print("Bigrams".bigrams()) # Prints ["Bi", "ig", "gr", "ra", "am", "ms"] [/codeblock] </description> </method> @@ -80,7 +80,7 @@ <method name="c_unescape" qualifiers="const"> <return type="String" /> <description> - Returns a copy of the string with escaped characters replaced by their meanings. Supported escape sequences are [code]\'[/code], [code]\"[/code], [code]\?[/code], [code]\\[/code], [code]\a[/code], [code]\b[/code], [code]\f[/code], [code]\n[/code], [code]\r[/code], [code]\t[/code], [code]\v[/code]. + Returns a copy of the string with escaped characters replaced by their meanings. Supported escape sequences are [code]\'[/code], [code]\"[/code], [code]\\[/code], [code]\a[/code], [code]\b[/code], [code]\f[/code], [code]\n[/code], [code]\r[/code], [code]\t[/code], [code]\v[/code]. [b]Note:[/b] Unlike the GDScript parser, this method doesn't support the [code]\uXXXX[/code] escape sequence. </description> </method> @@ -239,7 +239,7 @@ <description> Splits a string using a [param delimiter] and returns a substring at index [param slice]. Returns an empty string if the index doesn't exist. This is a more performant alternative to [method split] for cases when you need only one element from the array at a fixed index. - Example: + [b]Example:[/b] [codeblock] print("i/am/example/string".get_slice("/", 2)) # Prints 'example'. [/codeblock] @@ -408,7 +408,7 @@ <param index="0" name="parts" type="PackedStringArray" /> <description> Returns a [String] which is the concatenation of the [param parts]. The separator between elements is the string providing this method. - Example: + [b]Example:[/b] [codeblocks] [gdscript] print(", ".join(["One", "Two", "Three", "Four"])) @@ -430,7 +430,7 @@ <param index="0" name="length" type="int" /> <description> Returns a number of characters from the left of the string. If negative [param length] is used, the characters are counted downwards from [String]'s length. - Examples: + [b]Example:[/b] [codeblock] print("sample text".left(3)) #prints "sam" print("sample text".left(-3)) #prints "sample t" @@ -514,7 +514,7 @@ Converts a [float] to a string representation of a decimal number. The number of decimal places can be specified with [param decimals]. If [param decimals] is [code]-1[/code] (default), decimal places will be automatically adjusted so that the string representation has 14 significant digits (counting both digits to the left and the right of the decimal point). Trailing zeros are not included in the string. The last digit will be rounded and not truncated. - Some examples: + [b]Example:[/b] [codeblock] String.num(3.141593) # "3.141593" String.num(3.141593, 3) # "3.142" @@ -617,7 +617,7 @@ <param index="0" name="length" type="int" /> <description> Returns a number of characters from the right of the string. If negative [param length] is used, the characters are counted downwards from [String]'s length. - Examples: + [b]Example:[/b] [codeblock] print("sample text".right(3)) #prints "ext" print("sample text".right(-3)) #prints "ple text" @@ -634,15 +634,15 @@ </method> <method name="rsplit" qualifiers="const"> <return type="PackedStringArray" /> - <param index="0" name="delimiter" type="String" /> + <param index="0" name="delimiter" type="String" default="""" /> <param index="1" name="allow_empty" type="bool" default="true" /> <param index="2" name="maxsplit" type="int" default="0" /> <description> - Splits the string by a [param delimiter] string and returns an array of the substrings, starting from right. + Splits the string by a [param delimiter] string and returns an array of the substrings, starting from right. If [param delimiter] is an empty string, each substring will be a single character. The splits in the returned array are sorted in the same order as the original string, from left to right. If [param allow_empty] is [code]true[/code], and there are two adjacent delimiters in the string, it will add an empty string to the array of substrings at this position. If [param maxsplit] is specified, it defines the number of splits to do from the right up to [param maxsplit]. The default value of 0 means that all items are split, thus giving the same result as [method split]. - Example: + [b]Example:[/b] [codeblocks] [gdscript] var some_string = "One,Two,Three,Four" @@ -710,15 +710,15 @@ </method> <method name="split" qualifiers="const"> <return type="PackedStringArray" /> - <param index="0" name="delimiter" type="String" /> + <param index="0" name="delimiter" type="String" default="""" /> <param index="1" name="allow_empty" type="bool" default="true" /> <param index="2" name="maxsplit" type="int" default="0" /> <description> - Splits the string by a [param delimiter] string and returns an array of the substrings. The [param delimiter] can be of any length. + Splits the string by a [param delimiter] string and returns an array of the substrings. The [param delimiter] can be of any length. If [param delimiter] is an empty string, each substring will be a single character. If [param allow_empty] is [code]true[/code], and there are two adjacent delimiters in the string, it will add an empty string to the array of substrings at this position. If [param maxsplit] is specified, it defines the number of splits to do from the left up to [param maxsplit]. The default value of [code]0[/code] means that all items are split. If you need only one element from the array at a specific index, [method get_slice] is a more performant option. - Example: + [b]Example:[/b] [codeblocks] [gdscript] var some_string = "One,Two,Three,Four" @@ -738,7 +738,7 @@ </description> </method> <method name="split_floats" qualifiers="const"> - <return type="PackedFloat32Array" /> + <return type="PackedFloat64Array" /> <param index="0" name="delimiter" type="String" /> <param index="1" name="allow_empty" type="bool" default="true" /> <description> @@ -920,72 +920,88 @@ <return type="bool" /> <param index="0" name="right" type="String" /> <description> + Returns [code]true[/code] if both strings do not contain the same sequence of characters. </description> </operator> <operator name="operator !="> <return type="bool" /> <param index="0" name="right" type="StringName" /> <description> + Returns [code]true[/code] if this [String] is not equivalent to the given [StringName]. </description> </operator> <operator name="operator %"> <return type="String" /> <param index="0" name="right" type="Variant" /> <description> + Formats the [String], replacing the placeholders with one or more parameters. + To pass multiple parameters, [param right] needs to be an [Array]. + [codeblock] + print("I caught %d fishes!" % 2) # Prints "I caught 2 fishes!" + + var my_message = "Travelling to %s, at %2.2f per second." + var location = "Deep Valley" + var speed = 40.3485 + print(my_message % [location, speed]) # Prints "Travelling to Deep Valley, at 40.35 km/h." + [/codeblock] + In C#, there is no direct equivalent to this operator. Use the [method format] method, instead. + For more information, see the [url=$DOCS_URL/tutorials/scripting/gdscript/gdscript_format_string.html]GDScript format strings[/url] tutorial. </description> </operator> <operator name="operator +"> <return type="String" /> <param index="0" name="right" type="String" /> <description> - </description> - </operator> - <operator name="operator +"> - <return type="String" /> - <param index="0" name="right" type="int" /> - <description> + Appends [param right] at the end of this [String], also known as a string concatenation. </description> </operator> <operator name="operator <"> <return type="bool" /> <param index="0" name="right" type="String" /> <description> + Returns [code]true[/code] if the left [String] comes before [param right] in [url=https://en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode order[/url], which roughly matches the alphabetical order. Useful for sorting. </description> </operator> <operator name="operator <="> <return type="bool" /> <param index="0" name="right" type="String" /> <description> + Returns [code]true[/code] if the left [String] comes before [param right] in [url=https://en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode order[/url], which roughly matches the alphabetical order, or if both are equal. </description> </operator> <operator name="operator =="> <return type="bool" /> <param index="0" name="right" type="String" /> <description> + Returns [code]true[/code] if both strings contain the same sequence of characters. </description> </operator> <operator name="operator =="> <return type="bool" /> <param index="0" name="right" type="StringName" /> <description> + Returns [code]true[/code] if this [String] is equivalent to the given [StringName]. </description> </operator> <operator name="operator >"> <return type="bool" /> <param index="0" name="right" type="String" /> <description> + Returns [code]true[/code] if the left [String] comes after [param right] in [url=https://en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode order[/url], which roughly matches the alphabetical order. Useful for sorting. </description> </operator> <operator name="operator >="> <return type="bool" /> <param index="0" name="right" type="String" /> <description> + Returns [code]true[/code] if the left [String] comes after [param right] in [url=https://en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode order[/url], which roughly matches the alphabetical order, or if both are equal. </description> </operator> <operator name="operator []"> <return type="String" /> <param index="0" name="index" type="int" /> <description> + Returns a new [String] that only contains the character at [param index]. Indices start from [code]0[/code]. If [param index] is greater or equal to [code]0[/code], the character is fetched starting from the beginning of the string. If [param index] is a negative value, it is fetched starting from the end. Accessing a string out-of-bounds will cause a run-time error, pausing the project execution if run from the editor. </description> </operator> </operators> diff --git a/doc/classes/StringName.xml b/doc/classes/StringName.xml index c40d8929fc..02e9c62cd6 100644 --- a/doc/classes/StringName.xml +++ b/doc/classes/StringName.xml @@ -5,7 +5,7 @@ </brief_description> <description> [StringName]s are immutable strings designed for general-purpose representation of unique names (also called "string interning"). [StringName] ensures that only one instance of a given name exists (so two [StringName]s with the same value are the same object). Comparing them is much faster than with regular [String]s, because only the pointers are compared, not the whole strings. - You will usually just pass a [String] to methods expecting a [StringName] and it will be automatically converted, but you may occasionally want to construct a [StringName] ahead of time with [StringName] or the literal syntax [code]&"example"[/code]. + You will usually just pass a [String] to methods expecting a [StringName] and it will be automatically converted, but you may occasionally want to construct a [StringName] ahead of time with [StringName] or, in GDScript, the literal syntax [code]&"example"[/code]. See also [NodePath], which is a similar concept specifically designed to store pre-parsed node paths. </description> <tutorials> @@ -28,7 +28,7 @@ <return type="StringName" /> <param index="0" name="from" type="String" /> <description> - Creates a new [StringName] from the given [String]. [code]StringName("example")[/code] is equivalent to [code]&"example"[/code]. + Creates a new [StringName] from the given [String]. In GDScript, [code]StringName("example")[/code] is equivalent to [code]&"example"[/code]. </description> </constructor> </constructors> @@ -45,48 +45,56 @@ <return type="bool" /> <param index="0" name="right" type="String" /> <description> + Returns [code]true[/code] if this [StringName] is not equivalent to the given [String]. </description> </operator> <operator name="operator !="> <return type="bool" /> <param index="0" name="right" type="StringName" /> <description> + Returns [code]true[/code] if the [StringName] and [param right] do not refer to the same name. Comparisons between [StringName]s are much faster than regular [String] comparisons. </description> </operator> <operator name="operator <"> <return type="bool" /> <param index="0" name="right" type="StringName" /> <description> + Returns [code]true[/code] if the left [String] comes before [param right] in [url=https://en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode order[/url], which roughly matches the alphabetical order. Useful for sorting. </description> </operator> <operator name="operator <="> <return type="bool" /> <param index="0" name="right" type="StringName" /> <description> + Returns [code]true[/code] if the left [String] comes before [param right] in [url=https://en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode order[/url], which roughly matches the alphabetical order, or if both are equal. </description> </operator> <operator name="operator =="> <return type="bool" /> <param index="0" name="right" type="String" /> <description> + Returns [code]true[/code] if this [StringName] is equivalent to the given [String]. </description> </operator> <operator name="operator =="> <return type="bool" /> <param index="0" name="right" type="StringName" /> <description> + Returns [code]true[/code] if the [StringName] and [param right] refer to the same name. Comparisons between [StringName]s are much faster than regular [String] comparisons. </description> </operator> <operator name="operator >"> <return type="bool" /> <param index="0" name="right" type="StringName" /> <description> + Returns [code]true[/code] if the left [StringName] comes after [param right] in [url=https://en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode order[/url], which roughly matches the alphabetical order. Useful for sorting. </description> </operator> <operator name="operator >="> <return type="bool" /> <param index="0" name="right" type="StringName" /> <description> + Returns [code]true[/code] if the left [StringName] comes after [param right] in [url=https://en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode order[/url], which roughly matches the alphabetical order, or if both are equal. </description> </operator> </operators> diff --git a/doc/classes/StyleBox.xml b/doc/classes/StyleBox.xml index 8656cde4a0..ff6d4d8821 100644 --- a/doc/classes/StyleBox.xml +++ b/doc/classes/StyleBox.xml @@ -114,21 +114,21 @@ </method> </methods> <members> - <member name="content_margin_bottom" type="float" setter="set_default_margin" getter="get_default_margin"> + <member name="content_margin_bottom" type="float" setter="set_default_margin" getter="get_default_margin" default="-1.0"> The bottom margin for the contents of this style box. Increasing this value reduces the space available to the contents from the bottom. If this value is negative, it is ignored and a child-specific margin is used instead. For example for [StyleBoxFlat] the border thickness (if any) is used instead. It is up to the code using this style box to decide what these contents are: for example, a [Button] respects this content margin for the textual contents of the button. [method get_margin] should be used to fetch this value as consumer instead of reading these properties directly. This is because it correctly respects negative values and the fallback mentioned above. </member> - <member name="content_margin_left" type="float" setter="set_default_margin" getter="get_default_margin"> + <member name="content_margin_left" type="float" setter="set_default_margin" getter="get_default_margin" default="-1.0"> The left margin for the contents of this style box. Increasing this value reduces the space available to the contents from the left. Refer to [member content_margin_bottom] for extra considerations. </member> - <member name="content_margin_right" type="float" setter="set_default_margin" getter="get_default_margin"> + <member name="content_margin_right" type="float" setter="set_default_margin" getter="get_default_margin" default="-1.0"> The right margin for the contents of this style box. Increasing this value reduces the space available to the contents from the right. Refer to [member content_margin_bottom] for extra considerations. </member> - <member name="content_margin_top" type="float" setter="set_default_margin" getter="get_default_margin"> + <member name="content_margin_top" type="float" setter="set_default_margin" getter="get_default_margin" default="-1.0"> The top margin for the contents of this style box. Increasing this value reduces the space available to the contents from the top. Refer to [member content_margin_bottom] for extra considerations. </member> diff --git a/doc/classes/StyleBoxFlat.xml b/doc/classes/StyleBoxFlat.xml index 7f6628f8ee..d6900f935c 100644 --- a/doc/classes/StyleBoxFlat.xml +++ b/doc/classes/StyleBoxFlat.xml @@ -9,7 +9,8 @@ - Border width (individual width for each border) - Rounded corners (individual radius for each corner) - Shadow (with blur and offset) - Setting corner radius to high values is allowed. As soon as corners overlap, the stylebox will switch to a relative system. Example: + Setting corner radius to high values is allowed. As soon as corners overlap, the stylebox will switch to a relative system. + [b]Example:[/b] [codeblock] height = 30 corner_radius_top_left = 50 diff --git a/doc/classes/SurfaceTool.xml b/doc/classes/SurfaceTool.xml index d56cc9a31b..9d73e9fb39 100644 --- a/doc/classes/SurfaceTool.xml +++ b/doc/classes/SurfaceTool.xml @@ -275,28 +275,28 @@ </methods> <constants> <constant name="CUSTOM_RGBA8_UNORM" value="0" enum="CustomFormat"> - Limits range of data passed to `set_custom` to unsigned normalized 0 to 1 stored in 8 bits per channel. See [constant Mesh.ARRAY_CUSTOM_RGBA8_UNORM]. + Limits range of data passed to [method set_custom] to unsigned normalized 0 to 1 stored in 8 bits per channel. See [constant Mesh.ARRAY_CUSTOM_RGBA8_UNORM]. </constant> <constant name="CUSTOM_RGBA8_SNORM" value="1" enum="CustomFormat"> - Limits range of data passed to `set_custom` to signed normalized -1 to 1 stored in 8 bits per channel. See [constant Mesh.ARRAY_CUSTOM_RGBA8_SNORM]. + Limits range of data passed to [method set_custom] to signed normalized -1 to 1 stored in 8 bits per channel. See [constant Mesh.ARRAY_CUSTOM_RGBA8_SNORM]. </constant> <constant name="CUSTOM_RG_HALF" value="2" enum="CustomFormat"> - Stores data passed to `set_custom` as half precision floats, and uses only red and green color channels. See [constant Mesh.ARRAY_CUSTOM_RG_HALF]. + Stores data passed to [method set_custom] as half precision floats, and uses only red and green color channels. See [constant Mesh.ARRAY_CUSTOM_RG_HALF]. </constant> <constant name="CUSTOM_RGBA_HALF" value="3" enum="CustomFormat"> - Stores data passed to `set_custom` as half precision floats and uses all color channels. See [constant Mesh.ARRAY_CUSTOM_RGBA_HALF]. + Stores data passed to [method set_custom] as half precision floats and uses all color channels. See [constant Mesh.ARRAY_CUSTOM_RGBA_HALF]. </constant> <constant name="CUSTOM_R_FLOAT" value="4" enum="CustomFormat"> - Stores data passed to `set_custom` as full precision floats, and uses only red color channel. See [constant Mesh.ARRAY_CUSTOM_R_FLOAT]. + Stores data passed to [method set_custom] as full precision floats, and uses only red color channel. See [constant Mesh.ARRAY_CUSTOM_R_FLOAT]. </constant> <constant name="CUSTOM_RG_FLOAT" value="5" enum="CustomFormat"> - Stores data passed to `set_custom` as full precision floats, and uses only red and green color channels. See [constant Mesh.ARRAY_CUSTOM_RG_FLOAT]. + Stores data passed to [method set_custom] as full precision floats, and uses only red and green color channels. See [constant Mesh.ARRAY_CUSTOM_RG_FLOAT]. </constant> <constant name="CUSTOM_RGB_FLOAT" value="6" enum="CustomFormat"> - Stores data passed to `set_custom` as full precision floats, and uses only red, green and blue color channels. See [constant Mesh.ARRAY_CUSTOM_RGB_FLOAT]. + Stores data passed to [method set_custom] as full precision floats, and uses only red, green and blue color channels. See [constant Mesh.ARRAY_CUSTOM_RGB_FLOAT]. </constant> <constant name="CUSTOM_RGBA_FLOAT" value="7" enum="CustomFormat"> - Stores data passed to `set_custom` as full precision floats, and uses all color channels. See [constant Mesh.ARRAY_CUSTOM_RGBA_FLOAT]. + Stores data passed to [method set_custom] as full precision floats, and uses all color channels. See [constant Mesh.ARRAY_CUSTOM_RGBA_FLOAT]. </constant> <constant name="CUSTOM_MAX" value="8" enum="CustomFormat"> Used to indicate a disabled custom channel. diff --git a/doc/classes/SystemFont.xml b/doc/classes/SystemFont.xml index c235843f3b..b47d6ded7d 100644 --- a/doc/classes/SystemFont.xml +++ b/doc/classes/SystemFont.xml @@ -41,7 +41,7 @@ Font oversampling factor, if set to [code]0.0[/code] global oversampling factor is used instead. </member> <member name="subpixel_positioning" type="int" setter="set_subpixel_positioning" getter="get_subpixel_positioning" enum="TextServer.SubpixelPositioning" default="1"> - Font glyph sub-pixel positioning mode. Subpixel positioning provides shaper text and better kerning for smaller font sizes, at the cost of memory usage and font rasterization speed. Use [constant TextServer.SUBPIXEL_POSITIONING_AUTO] to automatically enable it based on the font size. + Font glyph subpixel positioning mode. Subpixel positioning provides shaper text and better kerning for smaller font sizes, at the cost of memory usage and font rasterization speed. Use [constant TextServer.SUBPIXEL_POSITIONING_AUTO] to automatically enable it based on the font size. </member> </members> </class> diff --git a/doc/classes/TabContainer.xml b/doc/classes/TabContainer.xml index 302f9b329b..e2e7a0c37e 100644 --- a/doc/classes/TabContainer.xml +++ b/doc/classes/TabContainer.xml @@ -217,7 +217,7 @@ </theme_item> <theme_item name="side_margin" data_type="constant" type="int" default="8"> The space at the left or right edges of the tab bar, accordingly with the current [member tab_alignment]. - The margin is ignored with [code]ALIGNMENT_RIGHT[/code] if the tabs are clipped (see [member clip_tabs]) or a popup has been set (see [method set_popup]). The margin is always ignored with [code]ALIGNMENT_CENTER[/code]. + The margin is ignored with [constant TabBar.ALIGNMENT_RIGHT] if the tabs are clipped (see [member clip_tabs]) or a popup has been set (see [method set_popup]). The margin is always ignored with [constant TabBar.ALIGNMENT_CENTER]. </theme_item> <theme_item name="font" data_type="font" type="Font"> The font used to draw tab names. diff --git a/doc/classes/TextEdit.xml b/doc/classes/TextEdit.xml index b1fda25ecd..d4f5233438 100644 --- a/doc/classes/TextEdit.xml +++ b/doc/classes/TextEdit.xml @@ -63,6 +63,13 @@ Adds a new caret at the given location. Returns the index of the new caret, or [code]-1[/code] if the location is invalid. </description> </method> + <method name="add_caret_at_carets"> + <return type="void" /> + <param index="0" name="below" type="bool" /> + <description> + Adds an additional caret above or below every caret. If [param below] is true the new caret will be added below and above otherwise. + </description> + </method> <method name="add_gutter"> <return type="void" /> <param index="0" name="at" type="int" default="-1" /> @@ -70,6 +77,12 @@ Register a new gutter to this [TextEdit]. Use [param at] to have a specific gutter order. A value of [code]-1[/code] appends the gutter to the right. </description> </method> + <method name="add_selection_for_next_occurrence"> + <return type="void" /> + <description> + Adds a selection and a caret for the next occurrence of the current selection. If there is no active selection, selects word under caret. + </description> + </method> <method name="adjust_carets_after_edit"> <return type="void" /> <param index="0" name="caret" type="int" /> @@ -1097,9 +1110,6 @@ The width, in pixels, of the minimap. </member> <member name="mouse_default_cursor_shape" type="int" setter="set_default_cursor_shape" getter="get_default_cursor_shape" overrides="Control" enum="Control.CursorShape" default="1" /> - <member name="override_selected_font_color" type="bool" setter="set_override_selected_font_color" getter="is_overriding_selected_font_color" default="false"> - If [code]true[/code], custom [code]font_selected_color[/code] will be used for selected text. - </member> <member name="placeholder_text" type="String" setter="set_placeholder" getter="get_placeholder" default=""""> Text shown when the [TextEdit] is empty. It is [b]not[/b] the [TextEdit]'s default value (see [member text]). </member> @@ -1363,8 +1373,8 @@ <theme_item name="font_readonly_color" data_type="color" type="Color" default="Color(0.875, 0.875, 0.875, 0.5)"> Sets the font [Color] when [member editable] is disabled. </theme_item> - <theme_item name="font_selected_color" data_type="color" type="Color" default="Color(1, 1, 1, 1)"> - Sets the [Color] of the selected text. [member override_selected_font_color] has to be enabled. + <theme_item name="font_selected_color" data_type="color" type="Color" default="Color(0, 0, 0, 0)"> + Sets the [Color] of the selected text. If equal to [code]Color(0, 0, 0, 0)[/code], it will be ignored. </theme_item> <theme_item name="search_result_border_color" data_type="color" type="Color" default="Color(0.3, 0.3, 0.3, 0.4)"> [Color] of the border around text that matches the search query. diff --git a/doc/classes/TextLine.xml b/doc/classes/TextLine.xml index 471c1a9040..d1dfdecbd2 100644 --- a/doc/classes/TextLine.xml +++ b/doc/classes/TextLine.xml @@ -144,6 +144,7 @@ </methods> <members> <member name="alignment" type="int" setter="set_horizontal_alignment" getter="get_horizontal_alignment" enum="HorizontalAlignment" default="0"> + Sets text alignment within the line as if the line was horizontal. </member> <member name="direction" type="int" setter="set_direction" getter="get_direction" enum="TextServer.Direction" default="0"> Text writing direction. diff --git a/doc/classes/TextServer.xml b/doc/classes/TextServer.xml index 2512c563c5..f4d92ab9b6 100644 --- a/doc/classes/TextServer.xml +++ b/doc/classes/TextServer.xml @@ -380,7 +380,7 @@ <return type="int" enum="TextServer.SubpixelPositioning" /> <param index="0" name="font_rid" type="RID" /> <description> - Returns font sub-pixel glyph positioning mode. + Returns font subpixel glyph positioning mode. </description> </method> <method name="font_get_supported_chars" qualifiers="const"> @@ -413,7 +413,7 @@ <param index="1" name="size" type="Vector2i" /> <param index="2" name="texture_index" type="int" /> <description> - Returns array containing the first free pixel in the each column of texture. Should be the same size as texture width or empty. + Returns array containing glyph packing data. </description> </method> <method name="font_get_transform" qualifiers="const"> @@ -804,7 +804,7 @@ <param index="0" name="font_rid" type="RID" /> <param index="1" name="subpixel_positioning" type="int" enum="TextServer.SubpixelPositioning" /> <description> - Sets font sub-pixel glyph positioning mode. + Sets font subpixel glyph positioning mode. </description> </method> <method name="font_set_texture_image"> @@ -824,7 +824,7 @@ <param index="2" name="texture_index" type="int" /> <param index="3" name="offset" type="PackedInt32Array" /> <description> - Sets array containing the first free pixel in the each column of texture. Should be the same size as texture width or empty. + Sets array containing glyph packing data. </description> </method> <method name="font_set_transform"> @@ -1416,7 +1416,7 @@ <param index="0" name="shaped" type="RID" /> <param index="1" name="direction" type="int" enum="TextServer.Direction" default="0" /> <description> - Sets desired text direction. If set to [code]TEXT_DIRECTION_AUTO[/code], direction will be detected based on the buffer contents and current locale. + Sets desired text direction. If set to [constant DIRECTION_AUTO], direction will be detected based on the buffer contents and current locale. [b]Note:[/b] Direction is ignored if server does not support [constant FEATURE_BIDI_LAYOUT] feature (supported by [TextServerAdvanced]). </description> </method> @@ -1547,23 +1547,23 @@ </constant> <constant name="FONT_ANTIALIASING_LCD" value="2" enum="FontAntialiasing"> Font glyphs are rasterized for LCD screens. - LCD sub-pixel layout is determined by the value of [code]gui/theme/lcd_subpixel_layout[/code] project settings. - LCD sub-pixel anti-aliasing mode is suitable only for rendering horizontal, unscaled text in 2D. + LCD subpixel layout is determined by the value of [code]gui/theme/lcd_subpixel_layout[/code] project settings. + LCD subpixel anti-aliasing mode is suitable only for rendering horizontal, unscaled text in 2D. </constant> <constant name="FONT_LCD_SUBPIXEL_LAYOUT_NONE" value="0" enum="FontLCDSubpixelLayout"> - Unknown or unsupported sub-pixel layout, LCD sub-pixel anti-aliasing is disabled. + Unknown or unsupported subpixel layout, LCD subpixel antialiasing is disabled. </constant> <constant name="FONT_LCD_SUBPIXEL_LAYOUT_HRGB" value="1" enum="FontLCDSubpixelLayout"> - Horizontal RGB sub-pixel layout. + Horizontal RGB subpixel layout. </constant> <constant name="FONT_LCD_SUBPIXEL_LAYOUT_HBGR" value="2" enum="FontLCDSubpixelLayout"> - Horizontal BGR sub-pixel layout. + Horizontal BGR subpixel layout. </constant> <constant name="FONT_LCD_SUBPIXEL_LAYOUT_VRGB" value="3" enum="FontLCDSubpixelLayout"> - Vertical RGB sub-pixel layout. + Vertical RGB subpixel layout. </constant> <constant name="FONT_LCD_SUBPIXEL_LAYOUT_VBGR" value="4" enum="FontLCDSubpixelLayout"> - Vertical BGR sub-pixel layout. + Vertical BGR subpixel layout. </constant> <constant name="FONT_LCD_SUBPIXEL_LAYOUT_MAX" value="5" enum="FontLCDSubpixelLayout"> </constant> @@ -1823,7 +1823,7 @@ Font have fixed-width characters. </constant> <constant name="STRUCTURED_TEXT_DEFAULT" value="0" enum="StructuredTextParser"> - Use default behavior. Same as [code]STRUCTURED_TEXT_NONE[/code] unless specified otherwise in the control description. + Use default behavior. Same as [constant STRUCTURED_TEXT_NONE] unless specified otherwise in the control description. </constant> <constant name="STRUCTURED_TEXT_URI" value="1" enum="StructuredTextParser"> BiDi override for URI. diff --git a/doc/classes/Texture.xml b/doc/classes/Texture.xml index df6e0433dc..86c9026fd1 100644 --- a/doc/classes/Texture.xml +++ b/doc/classes/Texture.xml @@ -1,8 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="Texture" inherits="Resource" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Base class for all texture types. </brief_description> <description> + [Texture] is the base class for all texture types. Common texture types are [Texture2D] and [ImageTexture]. See also [Image]. </description> <tutorials> </tutorials> diff --git a/doc/classes/Texture2D.xml b/doc/classes/Texture2D.xml index 3dd8c339b2..aac197090a 100644 --- a/doc/classes/Texture2D.xml +++ b/doc/classes/Texture2D.xml @@ -19,6 +19,8 @@ <param index="2" name="modulate" type="Color" /> <param index="3" name="transpose" type="bool" /> <description> + Called when the entire [Texture2D] is requested to be drawn over a [CanvasItem], with the top-left offset specified in [param pos]. [param modulate] specifies a multiplier for the colors being drawn, while [param transpose] specifies whether drawing should be performed in column-major order instead of row-major order (resulting in 90-degree clockwise rotation). + [b]Note:[/b] This is only used in 2D rendering, not 3D. </description> </method> <method name="_draw_rect" qualifiers="virtual const"> @@ -29,6 +31,8 @@ <param index="3" name="modulate" type="Color" /> <param index="4" name="transpose" type="bool" /> <description> + Called when the [Texture2D] is requested to be drawn onto [CanvasItem]'s specified [param rect]. [param modulate] specifies a multiplier for the colors being drawn, while [param transpose] specifies whether drawing should be performed in column-major order instead of row-major order (resulting in 90-degree clockwise rotation). + [b]Note:[/b] This is only used in 2D rendering, not 3D. </description> </method> <method name="_draw_rect_region" qualifiers="virtual const"> @@ -40,21 +44,26 @@ <param index="4" name="transpose" type="bool" /> <param index="5" name="clip_uv" type="bool" /> <description> + Called when a part of the [Texture2D] specified by [param src_rect]'s coordinates is requested to be drawn onto [CanvasItem]'s specified [param rect]. [param modulate] specifies a multiplier for the colors being drawn, while [param transpose] specifies whether drawing should be performed in column-major order instead of row-major order (resulting in 90-degree clockwise rotation). + [b]Note:[/b] This is only used in 2D rendering, not 3D. </description> </method> <method name="_get_height" qualifiers="virtual const"> <return type="int" /> <description> + Called when the [Texture2D]'s height is queried. </description> </method> <method name="_get_width" qualifiers="virtual const"> <return type="int" /> <description> + Called when the [Texture2D]'s width is queried. </description> </method> <method name="_has_alpha" qualifiers="virtual const"> <return type="bool" /> <description> + Called when the presence of an alpha channel in the [Texture2D] is queried. </description> </method> <method name="_is_pixel_opaque" qualifiers="virtual const"> @@ -62,6 +71,7 @@ <param index="0" name="x" type="int" /> <param index="1" name="y" type="int" /> <description> + Called when a pixel's opaque state in the [Texture2D] is queried at the specified [code](x, y)[/code] position. </description> </method> <method name="draw" qualifiers="const"> @@ -100,7 +110,7 @@ <method name="get_height" qualifiers="const"> <return type="int" /> <description> - Returns the texture height. + Returns the texture height in pixels. </description> </method> <method name="get_image" qualifiers="const"> @@ -113,13 +123,13 @@ <method name="get_size" qualifiers="const"> <return type="Vector2" /> <description> - Returns the texture size. + Returns the texture size in pixels. </description> </method> <method name="get_width" qualifiers="const"> <return type="int" /> <description> - Returns the texture width. + Returns the texture width in pixels. </description> </method> <method name="has_alpha" qualifiers="const"> diff --git a/doc/classes/Texture2DArray.xml b/doc/classes/Texture2DArray.xml index 113f37f974..ec00198db1 100644 --- a/doc/classes/Texture2DArray.xml +++ b/doc/classes/Texture2DArray.xml @@ -4,8 +4,9 @@ A single texture resource which consists of multiple, separate images. Each image has the same dimensions and number of mipmap levels. </brief_description> <description> - A Texture2DArray is different from a Texture3D: The Texture2DArray does not support trilinear interpolation between the [Image]s, i.e. no blending. + A Texture2DArray is different from a Texture3D: The Texture2DArray does not support trilinear interpolation between the [Image]s, i.e. no blending. See also [Cubemap] and [CubemapArray], which are texture arrays with specialized cubemap functions. A Texture2DArray is also different from an [AtlasTexture]: In a Texture2DArray, all images are treated separately. In an atlas, the regions (i.e. the single images) can be of different sizes. Furthermore, you usually need to add a padding around the regions, to prevent accidental UV mapping to more than one region. The same goes for mipmapping: Mipmap chains are handled separately for each layer. In an atlas, the slicing has to be done manually in the fragment shader. + To create such a texture file yourself, reimport your image files using the Godot Editor import presets. </description> <tutorials> </tutorials> diff --git a/doc/classes/Texture3D.xml b/doc/classes/Texture3D.xml index 4968f46fe8..1a66932d62 100644 --- a/doc/classes/Texture3D.xml +++ b/doc/classes/Texture3D.xml @@ -1,8 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="Texture3D" inherits="Texture" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Base class for 3-dimensionnal textures. </brief_description> <description> + Base class for [ImageTexture3D] and [CompressedTexture3D]. Cannot be used directly, but contains all the functions necessary for accessing the derived resource types. [Texture3D] is the base class for all 3-dimensional texture types. See also [TextureLayered]. + All images need to have the same width, height and number of mipmap levels. + To create such a texture file yourself, reimport your image files using the Godot Editor import presets. </description> <tutorials> </tutorials> @@ -10,61 +14,73 @@ <method name="_get_data" qualifiers="virtual const"> <return type="Image[]" /> <description> + Called when the [Texture3D]'s data is queried. </description> </method> <method name="_get_depth" qualifiers="virtual const"> <return type="int" /> <description> + Called when the [Texture3D]'s depth is queried. </description> </method> <method name="_get_format" qualifiers="virtual const"> <return type="int" enum="Image.Format" /> <description> + Called when the [Texture3D]'s format is queried. </description> </method> <method name="_get_height" qualifiers="virtual const"> <return type="int" /> <description> + Called when the [Texture3D]'s height is queried. </description> </method> <method name="_get_width" qualifiers="virtual const"> <return type="int" /> <description> + Called when the [Texture3D]'s width is queried. </description> </method> <method name="_has_mipmaps" qualifiers="virtual const"> <return type="bool" /> <description> + Called when the presence of mipmaps in the [Texture3D] is queried. </description> </method> <method name="get_data" qualifiers="const"> <return type="Image[]" /> <description> + Returns the [Texture3D]'s data as an array of [Image]s. Each [Image] represents a [i]slice[/i] of the [Texture3D], with different slices mapping to different depth (Z axis) levels. </description> </method> <method name="get_depth" qualifiers="const"> <return type="int" /> <description> + Returns the [Texture3D]'s depth in pixels. Depth is typically represented by the Z axis (a dimension not present in [Texture2D]). </description> </method> <method name="get_format" qualifiers="const"> <return type="int" enum="Image.Format" /> <description> + Returns the current format being used by this texture. See [enum Image.Format] for details. </description> </method> <method name="get_height" qualifiers="const"> <return type="int" /> <description> + Returns the [Texture3D]'s height in pixels. Width is typically represented by the Y axis. </description> </method> <method name="get_width" qualifiers="const"> <return type="int" /> <description> + Returns the [Texture3D]'s width in pixels. Width is typically represented by the X axis. </description> </method> <method name="has_mipmaps" qualifiers="const"> <return type="bool" /> <description> + Returns [code]true[/code] if the [Texture3D] has generated mipmaps. </description> </method> </methods> diff --git a/doc/classes/TextureButton.xml b/doc/classes/TextureButton.xml index 043eeb9a80..b185828577 100644 --- a/doc/classes/TextureButton.xml +++ b/doc/classes/TextureButton.xml @@ -27,19 +27,19 @@ <member name="texture_click_mask" type="BitMap" setter="set_click_mask" getter="get_click_mask"> Pure black and white [BitMap] image to use for click detection. On the mask, white pixels represent the button's clickable area. Use it to create buttons with curved shapes. </member> - <member name="texture_disabled" type="Texture2D" setter="set_disabled_texture" getter="get_disabled_texture"> + <member name="texture_disabled" type="Texture2D" setter="set_texture_disabled" getter="get_texture_disabled"> Texture to display when the node is disabled. See [member BaseButton.disabled]. </member> - <member name="texture_focused" type="Texture2D" setter="set_focused_texture" getter="get_focused_texture"> + <member name="texture_focused" type="Texture2D" setter="set_texture_focused" getter="get_texture_focused"> Texture to display when the node has mouse or keyboard focus. [member texture_focused] is displayed [i]over[/i] the base texture, so a partially transparent texture should be used to ensure the base texture remains visible. A texture that represents an outline or an underline works well for this purpose. To disable the focus visual effect, assign a fully transparent texture of any size. Note that disabling the focus visual effect will harm keyboard/controller navigation usability, so this is not recommended for accessibility reasons. </member> - <member name="texture_hover" type="Texture2D" setter="set_hover_texture" getter="get_hover_texture"> + <member name="texture_hover" type="Texture2D" setter="set_texture_hover" getter="get_texture_hover"> Texture to display when the mouse hovers the node. </member> - <member name="texture_normal" type="Texture2D" setter="set_normal_texture" getter="get_normal_texture"> + <member name="texture_normal" type="Texture2D" setter="set_texture_normal" getter="get_texture_normal"> Texture to display by default, when the node is [b]not[/b] in the disabled, focused, hover or pressed state. </member> - <member name="texture_pressed" type="Texture2D" setter="set_pressed_texture" getter="get_pressed_texture"> + <member name="texture_pressed" type="Texture2D" setter="set_texture_pressed" getter="get_texture_pressed"> Texture to display on mouse down over the node, if the node has keyboard focus and the player presses the Enter key or if the player presses the [member BaseButton.shortcut] key. </member> </members> diff --git a/doc/classes/TextureLayered.xml b/doc/classes/TextureLayered.xml index 5e6afcbc5c..8f6dff7acf 100644 --- a/doc/classes/TextureLayered.xml +++ b/doc/classes/TextureLayered.xml @@ -4,12 +4,11 @@ Base class for texture types which contain the data of multiple [Image]s. Each image is of the same size and format. </brief_description> <description> - Base class for [Texture2DArray], [Cubemap] and [CubemapArray]. Cannot be used directly, but contains all the functions necessary for accessing the derived resource types. + Base class for [ImageTextureLayered]. Cannot be used directly, but contains all the functions necessary for accessing the derived resource types. See also [Texture3D]. Data is set on a per-layer basis. For [Texture2DArray]s, the layer specifies the array layer. All images need to have the same width, height and number of mipmap levels. - A [TextureLayered] can be loaded with [code]method ResourceFormatLoader.load[/code]. - To create such a texture file yourself, re-import your image files using the Godot Editor import presets. - Internally, Godot maps these files to their respective counterparts in the target rendering driver (GLES3, Vulkan). + A [TextureLayered] can be loaded with [method ResourceLoader.load]. + Internally, Godot maps these files to their respective counterparts in the target rendering driver (Vulkan, GLES3). </description> <tutorials> </tutorials> @@ -17,37 +16,44 @@ <method name="_get_format" qualifiers="virtual const"> <return type="int" enum="Image.Format" /> <description> + Called when the [TextureLayered]'s format is queried. </description> </method> <method name="_get_height" qualifiers="virtual const"> <return type="int" /> <description> + Called when the the [TextureLayered]'s height is queried. </description> </method> <method name="_get_layer_data" qualifiers="virtual const"> <return type="Image" /> <param index="0" name="layer_index" type="int" /> <description> + Called when the data for a layer in the [TextureLayered] is queried. </description> </method> <method name="_get_layered_type" qualifiers="virtual const"> <return type="int" /> <description> + Called when the layers' type in the [TextureLayered] is queried. </description> </method> <method name="_get_layers" qualifiers="virtual const"> <return type="int" /> <description> + Called when the number of layers in the [TextureLayered] is queried. </description> </method> <method name="_get_width" qualifiers="virtual const"> <return type="int" /> <description> + Called when the [TextureLayered]'s width queried. </description> </method> <method name="_has_mipmaps" qualifiers="virtual const"> <return type="bool" /> <description> + Called when the presence of mipmaps in the [TextureLayered] is queried. </description> </method> <method name="get_format" qualifiers="const"> @@ -59,7 +65,7 @@ <method name="get_height" qualifiers="const"> <return type="int" /> <description> - Returns the height of the texture. Height is typically represented by the Y-axis. + Returns the height of the texture in pixels. Height is typically represented by the Y axis. </description> </method> <method name="get_layer_data" qualifiers="const"> @@ -72,6 +78,7 @@ <method name="get_layered_type" qualifiers="const"> <return type="int" enum="TextureLayered.LayeredType" /> <description> + Returns the [TextureLayered]'s type. The type determines how the data is accessed, with cubemaps having special types. </description> </method> <method name="get_layers" qualifiers="const"> @@ -83,7 +90,7 @@ <method name="get_width" qualifiers="const"> <return type="int" /> <description> - Returns the width of the texture. Width is typically represented by the X-axis. + Returns the width of the texture in pixels. Width is typically represented by the X axis. </description> </method> <method name="has_mipmaps" qualifiers="const"> @@ -95,10 +102,13 @@ </methods> <constants> <constant name="LAYERED_TYPE_2D_ARRAY" value="0" enum="LayeredType"> + Texture is a generic [Texture2DArray]. </constant> <constant name="LAYERED_TYPE_CUBEMAP" value="1" enum="LayeredType"> + Texture is a [Cubemap], with each side in its own layer (6 in total). </constant> <constant name="LAYERED_TYPE_CUBEMAP_ARRAY" value="2" enum="LayeredType"> + Texture is a [CubemapArray], with each cubemap being made of 6 layers. </constant> </constants> </class> diff --git a/doc/classes/TextureProgressBar.xml b/doc/classes/TextureProgressBar.xml index fcdb18e10d..d7a9d06a15 100644 --- a/doc/classes/TextureProgressBar.xml +++ b/doc/classes/TextureProgressBar.xml @@ -13,6 +13,7 @@ <return type="int" /> <param index="0" name="margin" type="int" enum="Side" /> <description> + Returns the stretch margin with the specified index. See [member stretch_margin_bottom] and related properties. </description> </method> <method name="set_stretch_margin"> @@ -20,6 +21,7 @@ <param index="0" name="margin" type="int" enum="Side" /> <param index="1" name="value" type="int" /> <description> + Sets the stretch margin with the specified index. See [member stretch_margin_bottom] and related properties. </description> </method> </methods> @@ -27,6 +29,7 @@ <member name="fill_mode" type="int" setter="set_fill_mode" getter="get_fill_mode" default="0"> The fill direction. See [enum FillMode] for possible values. </member> + <member name="mouse_filter" type="int" setter="set_mouse_filter" getter="get_mouse_filter" overrides="Control" enum="Control.MouseFilter" default="1" /> <member name="nine_patch_stretch" type="bool" setter="set_nine_patch_stretch" getter="get_nine_patch_stretch" default="false"> If [code]true[/code], Godot treats the bar's textures like in [NinePatchRect]. Use the [code]stretch_margin_*[/code] properties like [member stretch_margin_bottom] to set up the nine patch's 3×3 grid. When using a radial [member fill_mode], this setting will enable stretching. </member> @@ -40,6 +43,8 @@ <member name="radial_initial_angle" type="float" setter="set_radial_initial_angle" getter="get_radial_initial_angle" default="0.0"> Starting angle for the fill of [member texture_progress] if [member fill_mode] is [constant FILL_CLOCKWISE] or [constant FILL_COUNTER_CLOCKWISE]. When the node's [code]value[/code] is equal to its [code]min_value[/code], the texture doesn't show up at all. When the [code]value[/code] increases, the texture fills and tends towards [member radial_fill_degrees]. </member> + <member name="size_flags_vertical" type="int" setter="set_v_size_flags" getter="get_v_size_flags" overrides="Control" default="1" /> + <member name="step" type="float" setter="set_step" getter="get_step" overrides="Range" default="1.0" /> <member name="stretch_margin_bottom" type="int" setter="set_stretch_margin" getter="get_stretch_margin" default="0"> The height of the 9-patch's bottom row. A margin of 16 means the 9-slice's bottom corners and side will have a height of 16 pixels. You can set all 4 margin values individually to create panels with non-uniform borders. </member> diff --git a/doc/classes/TileData.xml b/doc/classes/TileData.xml index 798a536a88..f815b8d0c3 100644 --- a/doc/classes/TileData.xml +++ b/doc/classes/TileData.xml @@ -1,8 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="TileData" inherits="Object" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> + Settings for a single tile in a [TileSet]. </brief_description> <description> + [TileData] object represents a single tile in a [TileSet]. It is usually edited using the tileset editor, but it can be modified at runtime using [method TileMap._tile_data_runtime_update]. </description> <tutorials> </tutorials> @@ -196,32 +198,43 @@ </methods> <members> <member name="flip_h" type="bool" setter="set_flip_h" getter="get_flip_h" default="false"> + If [code]true[/code], the tile will have its texture flipped horizontally. </member> <member name="flip_v" type="bool" setter="set_flip_v" getter="get_flip_v" default="false"> + If [code]true[/code], the tile will have its texture flipped vertically. </member> <member name="material" type="Material" setter="set_material" getter="get_material"> The [Material] to use for this [TileData]. This can be a [CanvasItemMaterial] to use the default shader, or a [ShaderMaterial] to use a custom shader. </member> <member name="modulate" type="Color" setter="set_modulate" getter="get_modulate" default="Color(1, 1, 1, 1)"> + Color modulation of the tile. </member> <member name="probability" type="float" setter="set_probability" getter="get_probability" default="1.0"> + Relative probability of this tile being selected when drawing a pattern of random tiles. </member> <member name="terrain" type="int" setter="set_terrain" getter="get_terrain" default="-1"> + ID of the terrain from the terrain set that the tile uses. </member> <member name="terrain_set" type="int" setter="set_terrain_set" getter="get_terrain_set" default="-1"> + ID of the terrain set that the tile uses. </member> <member name="texture_offset" type="Vector2i" setter="set_texture_offset" getter="get_texture_offset" default="Vector2i(0, 0)"> + Offsets the position of where the tile is drawn. </member> <member name="transpose" type="bool" setter="set_transpose" getter="get_transpose" default="false"> + If [code]true[/code], the tile will display transposed, i.e. with horizontal and vertical texture UVs swapped. </member> <member name="y_sort_origin" type="int" setter="set_y_sort_origin" getter="get_y_sort_origin" default="0"> + Vertical point of the tile used for determining y-sorted order. </member> <member name="z_index" type="int" setter="set_z_index" getter="get_z_index" default="0"> + Ordering index of this tile, relative to [TileMap]. </member> </members> <signals> <signal name="changed"> <description> + Emitted when any of the properties are changed. </description> </signal> </signals> diff --git a/doc/classes/TileSet.xml b/doc/classes/TileSet.xml index 7ced16d1af..5a24483774 100644 --- a/doc/classes/TileSet.xml +++ b/doc/classes/TileSet.xml @@ -7,7 +7,6 @@ A TileSet is a library of tiles for a [TileMap]. A TileSet handles a list of [TileSetSource], each of them storing a set of tiles. Tiles can either be from a [TileSetAtlasSource], that render tiles out of a texture with support for physics, navigation, etc... or from a [TileSetScenesCollectionSource] which exposes scene-based tiles. Tiles are referenced by using three IDs: their source ID, their atlas coordinates ID and their alternative tile ID. - A TileSet can be configured so that its tiles expose more or less properties. To do so, the TileSet resources uses property layers, that you can add or remove depending on your needs. For example, adding a physics layer allows giving collision shapes to your tiles. Each layer having dedicated properties (physics layer an mask), you may add several TileSet physics layers for each type of collision you need. See the functions to add new layers for more information. diff --git a/doc/classes/TileSetAtlasSource.xml b/doc/classes/TileSetAtlasSource.xml index df469cd030..5efc1da6f9 100644 --- a/doc/classes/TileSetAtlasSource.xml +++ b/doc/classes/TileSetAtlasSource.xml @@ -6,9 +6,7 @@ <description> An atlas is a grid of tiles laid out on a texture. Each tile in the grid must be exposed using [method create_tile]. Those tiles are then indexed using their coordinates in the grid. Each tile can also have a size in the grid coordinates, making it more or less cells in the atlas. - Alternatives version of a tile can be created using [method create_alternative_tile], which are then indexed using an alternative ID. The main tile (the one in the grid), is accessed with an alternative ID equal to 0. - Each tile alternate has a set of properties that is defined by the source's [TileSet] layers. Those properties are stored in a TileData object that can be accessed and modified using [method get_tile_data]. As TileData properties are stored directly in the TileSetAtlasSource resource, their properties might also be set using [code]TileSetAtlasSource.set("<coords_x>:<coords_y>/<alternative_id>/<tile_data_property>")[/code]. </description> diff --git a/doc/classes/TileSetSource.xml b/doc/classes/TileSetSource.xml index e88e725bf4..4ebd7735b0 100644 --- a/doc/classes/TileSetSource.xml +++ b/doc/classes/TileSetSource.xml @@ -7,7 +7,6 @@ Exposes a set of tiles for a [TileSet] resource. Tiles in a source are indexed with two IDs, coordinates ID (of type Vector2i) and an alternative ID (of type int), named according to their use in the [TileSetAtlasSource] class. Depending on the TileSet source type, those IDs might have restrictions on their values, this is why the base [TileSetSource] class only exposes getters for them. - You can iterate over all tiles exposed by a TileSetSource by first iterating over coordinates IDs using [method get_tiles_count] and [method get_tile_id], then over alternative IDs using [method get_alternative_tiles_count] and [method get_alternative_tile_id]. </description> <tutorials> diff --git a/doc/classes/Translation.xml b/doc/classes/Translation.xml index 314be9adf8..ae2f8d8dff 100644 --- a/doc/classes/Translation.xml +++ b/doc/classes/Translation.xml @@ -88,6 +88,12 @@ The number [param n] is the number or quantity of the plural object. It will be used to guide the translation system to fetch the correct plural form for the selected language. </description> </method> + <method name="get_translated_message_list" qualifiers="const"> + <return type="PackedStringArray" /> + <description> + Returns all the messages (translated text). + </description> + </method> </methods> <members> <member name="locale" type="String" setter="set_locale" getter="get_locale" default=""en""> diff --git a/doc/classes/Tree.xml b/doc/classes/Tree.xml index 539ca38190..6a016c3ebd 100644 --- a/doc/classes/Tree.xml +++ b/doc/classes/Tree.xml @@ -84,6 +84,7 @@ <return type="int" /> <param index="0" name="column" type="int" /> <description> + Returns the expand ratio assigned to the column. </description> </method> <method name="get_column_title" qualifiers="const"> @@ -223,12 +224,14 @@ <return type="bool" /> <param index="0" name="column" type="int" /> <description> + Returns [code]true[/code] if the column has enabled clipping (see [method set_column_clip_content]). </description> </method> <method name="is_column_expanding" qualifiers="const"> <return type="bool" /> <param index="0" name="column" type="int" /> <description> + Returns [code]true[/code] if the column has enabled expanding (see [method set_column_expand]). </description> </method> <method name="scroll_to_item"> @@ -244,6 +247,7 @@ <param index="0" name="column" type="int" /> <param index="1" name="enable" type="bool" /> <description> + Allows to enable clipping for column's content, making the content size ignored. </description> </method> <method name="set_column_custom_minimum_width"> @@ -251,7 +255,7 @@ <param index="0" name="column" type="int" /> <param index="1" name="min_width" type="int" /> <description> - Overrides the calculated minimum width of a column. It can be set to `0` to restore the default behavior. Columns that have the "Expand" flag will use their "min_width" in a similar fashion to [member Control.size_flags_stretch_ratio]. + Overrides the calculated minimum width of a column. It can be set to [code]0[/code] to restore the default behavior. Columns that have the "Expand" flag will use their "min_width" in a similar fashion to [member Control.size_flags_stretch_ratio]. </description> </method> <method name="set_column_expand"> @@ -259,7 +263,7 @@ <param index="0" name="column" type="int" /> <param index="1" name="expand" type="bool" /> <description> - If [code]true[/code], the column will have the "Expand" flag of [Control]. Columns that have the "Expand" flag will use their "min_width" in a similar fashion to [member Control.size_flags_stretch_ratio]. + If [code]true[/code], the column will have the "Expand" flag of [Control]. Columns that have the "Expand" flag will use their expand ratio in a similar fashion to [member Control.size_flags_stretch_ratio] (see [method set_column_expand_ratio]). </description> </method> <method name="set_column_expand_ratio"> @@ -267,6 +271,7 @@ <param index="0" name="column" type="int" /> <param index="1" name="ratio" type="int" /> <description> + Sets the relative expand ratio for a column. See [method set_column_expand]. </description> </method> <method name="set_column_title"> @@ -293,6 +298,14 @@ Sets language code of column title used for line-breaking and text shaping algorithms, if left empty current locale is used instead. </description> </method> + <method name="set_selected"> + <return type="void" /> + <param index="0" name="item" type="TreeItem" /> + <param index="1" name="column" type="int" /> + <description> + Selects the specified [TreeItem] and column. + </description> + </method> </methods> <members> <member name="allow_reselect" type="bool" setter="set_allow_reselect" getter="get_allow_reselect" default="false"> diff --git a/doc/classes/Tween.xml b/doc/classes/Tween.xml index acf900ae55..eef35049e5 100644 --- a/doc/classes/Tween.xml +++ b/doc/classes/Tween.xml @@ -177,7 +177,8 @@ <method name="parallel"> <return type="Tween" /> <description> - Makes the next [Tweener] run parallelly to the previous one. Example: + Makes the next [Tweener] run parallelly to the previous one. + [b]Example:[/b] [codeblocks] [gdscript] var tween = create_tween() @@ -272,7 +273,7 @@ <param index="0" name="callback" type="Callable" /> <description> Creates and appends a [CallbackTweener]. This method can be used to call an arbitrary method in any object. Use [method Callable.bind] to bind additional arguments for the call. - Example: object that keeps shooting every 1 second. + [b]Example:[/b] Object that keeps shooting every 1 second: [codeblocks] [gdscript] var tween = get_tree().create_tween().set_loops() @@ -283,7 +284,7 @@ tween.TweenCallback(new Callable(Shoot)).SetDelay(1.0f); [/csharp] [/codeblocks] - Example: turning a sprite red and then blue, with 2 second delay. + [b]Example:[/b] Turning a sprite red and then blue, with 2 second delay: [codeblocks] [gdscript] var tween = get_tree().create_tween() @@ -304,7 +305,7 @@ <param index="0" name="time" type="float" /> <description> Creates and appends an [IntervalTweener]. This method can be used to create delays in the tween animation, as an alternative to using the delay in other [Tweener]s, or when there's no animation (in which case the [Tween] acts as a timer). [param time] is the length of the interval, in seconds. - Example: creating an interval in code execution. + [b]Example:[/b] Creating an interval in code execution: [codeblocks] [gdscript] # ... some code @@ -317,7 +318,7 @@ // ... more code [/csharp] [/codeblocks] - Example: creating an object that moves back and forth and jumps every few seconds. + [b]Example:[/b] Creating an object that moves back and forth and jumps every few seconds: [codeblocks] [gdscript] var tween = create_tween().set_loops() @@ -348,7 +349,7 @@ <param index="3" name="duration" type="float" /> <description> Creates and appends a [MethodTweener]. This method is similar to a combination of [method tween_callback] and [method tween_property]. It calls a method over time with a tweened value provided as an argument. The value is tweened between [param from] and [param to] over the time specified by [param duration], in seconds. Use [method Callable.bind] to bind additional arguments for the call. You can use [method MethodTweener.set_ease] and [method MethodTweener.set_trans] to tweak the easing and transition of the value or [method MethodTweener.set_delay] to delay the tweening. - Example: making a 3D object look from one point to another point. + [b]Example:[/b] Making a 3D object look from one point to another point: [codeblocks] [gdscript] var tween = create_tween() @@ -359,7 +360,7 @@ tween.TweenMethod(new Callable(() => LookAt(Vector3.Up)), new Vector3(-1.0f, 0.0f, -1.0f), new Vector3(1.0f, 0.0f, -1.0f), 1.0f); // The LookAt() method takes up vector as second argument. [/csharp] [/codeblocks] - Example: setting a text of a [Label], using an intermediate method and after a delay. + [b]Example:[/b] Setting the text of a [Label], using an intermediate method and after a delay: [codeblocks] [gdscript] func _ready(): @@ -393,7 +394,8 @@ <param index="2" name="final_val" type="Variant" /> <param index="3" name="duration" type="float" /> <description> - Creates and appends a [PropertyTweener]. This method tweens a [param property] of an [param object] between an initial value and [param final_val] in a span of time equal to [param duration], in seconds. The initial value by default is the property's value at the time the tweening of the [PropertyTweener] starts. For example: + Creates and appends a [PropertyTweener]. This method tweens a [param property] of an [param object] between an initial value and [param final_val] in a span of time equal to [param duration], in seconds. The initial value by default is the property's value at the time the tweening of the [PropertyTweener] starts. + [b]Example:[/b] [codeblocks] [gdscript] var tween = create_tween() @@ -408,7 +410,7 @@ [/codeblocks] will move the sprite to position (100, 200) and then to (200, 300). If you use [method PropertyTweener.from] or [method PropertyTweener.from_current], the starting position will be overwritten by the given value instead. See other methods in [PropertyTweener] to see how the tweening can be tweaked further. [b]Note:[/b] You can find the correct property name by hovering over the property in the Inspector. You can also provide the components of a property directly by using [code]"property:component"[/code] (eg. [code]position:x[/code]), where it would only apply to that particular component. - Example: moving object twice from the same position, with different transition types. + [b]Example:[/b] Moving an object twice from the same position, with different transition types: [codeblocks] [gdscript] var tween = create_tween() diff --git a/doc/classes/VSlider.xml b/doc/classes/VSlider.xml index 488154106f..4bc98dea6f 100644 --- a/doc/classes/VSlider.xml +++ b/doc/classes/VSlider.xml @@ -33,7 +33,7 @@ The background of the area below the grabber. </theme_item> <theme_item name="grabber_area_highlight" data_type="style" type="StyleBox"> - The background of the area below the grabber, to the left of the grabber. + The background of the area below the grabber that displays when it's being hovered or focused. </theme_item> <theme_item name="slider" data_type="style" type="StyleBox"> The background for the whole slider. Determines the width of the [code]grabber_area[/code]. diff --git a/doc/classes/Vector2.xml b/doc/classes/Vector2.xml index 5590f82336..4156030d77 100644 --- a/doc/classes/Vector2.xml +++ b/doc/classes/Vector2.xml @@ -5,7 +5,8 @@ </brief_description> <description> 2-element structure that can be used to represent positions in 2D space or any other pair of numeric values. - It uses floating-point coordinates. See [Vector2i] for its integer counterpart. + It uses floating-point coordinates. By default, these floating-point values use 32-bit precision, unlike [float] which is always 64-bit. If double precision is needed, compile the engine with the option [code]float=64[/code]. + See [Vector2i] for its integer counterpart. [b]Note:[/b] In a boolean context, a Vector2 will evaluate to [code]false[/code] if it's equal to [code]Vector2(0, 0)[/code]. Otherwise, a Vector2 will always evaluate to [code]true[/code]. </description> <tutorials> @@ -85,6 +86,16 @@ Returns the aspect ratio of this vector, the ratio of [member x] to [member y]. </description> </method> + <method name="bezier_derivative" qualifiers="const"> + <return type="Vector2" /> + <param index="0" name="control_1" type="Vector2" /> + <param index="1" name="control_2" type="Vector2" /> + <param index="2" name="end" type="Vector2" /> + <param index="3" name="t" type="float" /> + <description> + Returns the derivative at the given [param t] on the [url=https://en.wikipedia.org/wiki/B%C3%A9zier_curve]Bezier curve[/url] defined by this vector and the given [param control_1], [param control_2], and [param end] points. + </description> + </method> <method name="bezier_interpolate" qualifiers="const"> <return type="Vector2" /> <param index="0" name="control_1" type="Vector2" /> @@ -99,7 +110,7 @@ <return type="Vector2" /> <param index="0" name="n" type="Vector2" /> <description> - Returns the vector "bounced off" from a plane defined by the given normal. + Returns a new vector "bounced off" from a plane defined by the given normal. </description> </method> <method name="ceil" qualifiers="const"> @@ -276,7 +287,7 @@ <method name="normalized" qualifiers="const"> <return type="Vector2" /> <description> - Returns the vector scaled to unit length. Equivalent to [code]v / v.length()[/code]. + Returns a new vector scaled to unit length. Equivalent to [code]v / v.length()[/code]. </description> </method> <method name="orthogonal" qualifiers="const"> @@ -303,21 +314,21 @@ <return type="Vector2" /> <param index="0" name="b" type="Vector2" /> <description> - Returns this vector projected onto the vector [code]b[/code]. + Returns the result of projecting the vector onto the given vector [param b]. </description> </method> <method name="reflect" qualifiers="const"> <return type="Vector2" /> <param index="0" name="n" type="Vector2" /> <description> - Returns the vector reflected (i.e. mirrored, or symmetric) over a line defined by the given direction vector [param n]. + Returns the result of reflecting the vector from a line defined by the given direction vector [param n]. </description> </method> <method name="rotated" qualifiers="const"> <return type="Vector2" /> <param index="0" name="angle" type="float" /> <description> - Returns the vector rotated by [param angle] (in radians). See also [method @GlobalScope.deg_to_rad]. + Returns the result of rotating this vector by [param angle] (in radians). See also [method @GlobalScope.deg_to_rad]. </description> </method> <method name="round" qualifiers="const"> @@ -329,7 +340,7 @@ <method name="sign" qualifiers="const"> <return type="Vector2" /> <description> - Returns a new vector with each component set to one or negative one, depending on the signs of the components, or zero if the component is zero, by calling [method @GlobalScope.sign] on each component. + Returns a new vector with each component set to [code]1.0[/code] if it's positive, [code]-1.0[/code] if it's negative, and [code]0.0[/code] if it's zero. The result is identical to calling [method @GlobalScope.sign] on each component. </description> </method> <method name="slerp" qualifiers="const"> @@ -345,14 +356,14 @@ <return type="Vector2" /> <param index="0" name="n" type="Vector2" /> <description> - Returns this vector slid along a plane defined by the given normal. + Returns the result of sliding the vector along a plane defined by the given normal. </description> </method> <method name="snapped" qualifiers="const"> <return type="Vector2" /> <param index="0" name="step" type="Vector2" /> <description> - Returns this vector with each component snapped to the nearest multiple of [param step]. This can also be used to round to an arbitrary number of decimals. + Returns a new vector with each component snapped to the nearest multiple of the corresponding component in [param step]. This can also be used to round the components to an arbitrary number of decimals. </description> </method> </methods> diff --git a/doc/classes/Vector2i.xml b/doc/classes/Vector2i.xml index eab880e57f..db6bc8f237 100644 --- a/doc/classes/Vector2i.xml +++ b/doc/classes/Vector2i.xml @@ -5,7 +5,7 @@ </brief_description> <description> 2-element structure that can be used to represent positions in 2D space or any other pair of numeric values. - It uses integer coordinates and is therefore preferable to [Vector2] when exact precision is required. + It uses integer coordinates and is therefore preferable to [Vector2] when exact precision is required. Note that the values are limited to 32 bits, and unlike [Vector2] this cannot be configured with an engine build option. Use [int] or [PackedInt64Array] if 64-bit values are needed. [b]Note:[/b] In a boolean context, a Vector2i will evaluate to [code]false[/code] if it's equal to [code]Vector2i(0, 0)[/code]. Otherwise, a Vector2i will always evaluate to [code]true[/code]. </description> <tutorials> @@ -92,7 +92,14 @@ <method name="sign" qualifiers="const"> <return type="Vector2i" /> <description> - Returns a new vector with each component set to one or negative one, depending on the signs of the components, or zero if the component is zero, by calling [method @GlobalScope.sign] on each component. + Returns a new vector with each component set to [code]1[/code] if it's positive, [code]-1[/code] if it's negative, and [code]0[/code] if it's zero. The result is identical to calling [method @GlobalScope.sign] on each component. + </description> + </method> + <method name="snapped" qualifiers="const"> + <return type="Vector2i" /> + <param index="0" name="step" type="Vector2i" /> + <description> + Returns a new vector with each component snapped to the closest multiple of the corresponding component in [param step]. </description> </method> </methods> diff --git a/doc/classes/Vector3.xml b/doc/classes/Vector3.xml index 81e8dd2260..2896408505 100644 --- a/doc/classes/Vector3.xml +++ b/doc/classes/Vector3.xml @@ -5,7 +5,8 @@ </brief_description> <description> 3-element structure that can be used to represent positions in 3D space or any other triplet of numeric values. - It uses floating-point coordinates. See [Vector3i] for its integer counterpart. + It uses floating-point coordinates. By default, these floating-point values use 32-bit precision, unlike [float] which is always 64-bit. If double precision is needed, compile the engine with the option [code]float=64[/code]. + See [Vector3i] for its integer counterpart. [b]Note:[/b] In a boolean context, a Vector3 will evaluate to [code]false[/code] if it's equal to [code]Vector3(0, 0, 0)[/code]. Otherwise, a Vector3 will always evaluate to [code]true[/code]. </description> <tutorials> @@ -61,6 +62,16 @@ Returns the unsigned minimum angle to the given vector, in radians. </description> </method> + <method name="bezier_derivative" qualifiers="const"> + <return type="Vector3" /> + <param index="0" name="control_1" type="Vector3" /> + <param index="1" name="control_2" type="Vector3" /> + <param index="2" name="end" type="Vector3" /> + <param index="3" name="t" type="float" /> + <description> + Returns the derivative at the given [param t] on the [url=https://en.wikipedia.org/wiki/B%C3%A9zier_curve]Bezier curve[/url] defined by this vector and the given [param control_1], [param control_2], and [param end] points. + </description> + </method> <method name="bezier_interpolate" qualifiers="const"> <return type="Vector3" /> <param index="0" name="control_1" type="Vector3" /> @@ -183,7 +194,7 @@ <method name="is_normalized" qualifiers="const"> <return type="bool" /> <description> - Returns [code]true[/code] if the vector is normalized, [code]false[/code] otherwise. + Returns [code]true[/code] if the vector is [method normalized], [code]false[/code] otherwise. </description> </method> <method name="is_zero_approx" qualifiers="const"> @@ -244,18 +255,22 @@ <method name="normalized" qualifiers="const"> <return type="Vector3" /> <description> - Returns the vector scaled to unit length. Equivalent to [code]v / v.length()[/code]. + Returns the vector scaled to unit length. Equivalent to [code]v / v.length()[/code]. See also [method is_normalized]. </description> </method> <method name="octahedron_decode" qualifiers="static"> <return type="Vector3" /> <param index="0" name="uv" type="Vector2" /> <description> + Returns the [Vector3] from an octahedral-compressed form created using [method octahedron_encode] (stored as a [Vector2]). </description> </method> <method name="octahedron_encode" qualifiers="const"> <return type="Vector2" /> <description> + Returns the octahedral-encoded (oct32) form of this [Vector3] as a [Vector2]. Since a [Vector2] occupies 1/3 less memory compared to [Vector3], this form of compression can be used to pass greater amounts of [method normalized] [Vector3]s without increasing storage or memory requirements. See also [method octahedron_decode]. + [b]Note:[/b] [method octahedron_encode] can only be used for [method normalized] vectors. [method octahedron_encode] does [i]not[/i] check whether this [Vector3] is normalized, and will return a value that does not decompress to the original value if the [Vector3] is not normalized. + [b]Note:[/b] Octahedral compression is [i]lossy[/i], although visual differences are rarely perceptible in real world scenarios. </description> </method> <method name="outer" qualifiers="const"> @@ -283,14 +298,14 @@ <return type="Vector3" /> <param index="0" name="b" type="Vector3" /> <description> - Returns this vector projected onto the vector [param b]. + Returns the result of projecting the vector onto the given vector [param b]. </description> </method> <method name="reflect" qualifiers="const"> <return type="Vector3" /> <param index="0" name="n" type="Vector3" /> <description> - Returns this vector reflected from a plane defined by the given normal. + Returns the result of reflecting the vector from a plane defined by the given normal [param n]. </description> </method> <method name="rotated" qualifiers="const"> @@ -298,7 +313,7 @@ <param index="0" name="axis" type="Vector3" /> <param index="1" name="angle" type="float" /> <description> - Rotates this vector around a given axis by [param angle] (in radians). The axis must be a normalized vector. + Returns the result of rotating this vector around a given axis by [param angle] (in radians). The axis must be a normalized vector. See also [method @GlobalScope.deg_to_rad]. </description> </method> <method name="round" qualifiers="const"> @@ -310,7 +325,7 @@ <method name="sign" qualifiers="const"> <return type="Vector3" /> <description> - Returns a new vector with each component set to one or negative one, depending on the signs of the components, or zero if the component is zero, by calling [method @GlobalScope.sign] on each component. + Returns a new vector with each component set to [code]1.0[/code] if it's positive, [code]-1.0[/code] if it's negative, and [code]0.0[/code] if it's zero. The result is identical to calling [method @GlobalScope.sign] on each component. </description> </method> <method name="signed_angle_to" qualifiers="const"> @@ -334,14 +349,14 @@ <return type="Vector3" /> <param index="0" name="n" type="Vector3" /> <description> - Returns this vector slid along a plane defined by the given normal. + Returns a new vector slid along a plane defined by the given normal. </description> </method> <method name="snapped" qualifiers="const"> <return type="Vector3" /> <param index="0" name="step" type="Vector3" /> <description> - Returns this vector with each component snapped to the nearest multiple of [param step]. This can also be used to round to an arbitrary number of decimals. + Returns a new vector with each component snapped to the nearest multiple of the corresponding component in [param step]. This can also be used to round the components to an arbitrary number of decimals. </description> </method> </methods> diff --git a/doc/classes/Vector3i.xml b/doc/classes/Vector3i.xml index 1c2a033f7a..5c6dc3c1c5 100644 --- a/doc/classes/Vector3i.xml +++ b/doc/classes/Vector3i.xml @@ -5,7 +5,7 @@ </brief_description> <description> 3-element structure that can be used to represent positions in 3D space or any other triplet of numeric values. - It uses integer coordinates and is therefore preferable to [Vector3] when exact precision is required. + It uses integer coordinates and is therefore preferable to [Vector3] when exact precision is required. Note that the values are limited to 32 bits, and unlike [Vector3] this cannot be configured with an engine build option. Use [int] or [PackedInt64Array] if 64-bit values are needed. [b]Note:[/b] In a boolean context, a Vector3i will evaluate to [code]false[/code] if it's equal to [code]Vector3i(0, 0, 0)[/code]. Otherwise, a Vector3i will always evaluate to [code]true[/code]. </description> <tutorials> @@ -87,7 +87,14 @@ <method name="sign" qualifiers="const"> <return type="Vector3i" /> <description> - Returns the vector with each component set to one or negative one, depending on the signs of the components. + Returns a new vector with each component set to [code]1[/code] if it's positive, [code]-1[/code] if it's negative, and [code]0[/code] if it's zero. The result is identical to calling [method @GlobalScope.sign] on each component. + </description> + </method> + <method name="snapped" qualifiers="const"> + <return type="Vector3i" /> + <param index="0" name="step" type="Vector3i" /> + <description> + Returns a new vector with each component snapped to the closest multiple of the corresponding component in [param step]. </description> </method> </methods> diff --git a/doc/classes/Vector4.xml b/doc/classes/Vector4.xml index 662d0bce3a..d15ae35b59 100644 --- a/doc/classes/Vector4.xml +++ b/doc/classes/Vector4.xml @@ -5,7 +5,8 @@ </brief_description> <description> 4-element structure that can be used to represent any quadruplet of numeric values. - It uses floating-point coordinates. See [Vector4i] for its integer counterpart. + It uses floating-point coordinates. By default, these floating-point values use 32-bit precision, unlike [float] which is always 64-bit. If double precision is needed, compile the engine with the option [code]float=64[/code]. + See [Vector4i] for its integer counterpart. [b]Note:[/b] In a boolean context, a Vector4 will evaluate to [code]false[/code] if it's equal to [code]Vector4(0, 0, 0, 0)[/code]. Otherwise, a Vector4 will always evaluate to [code]true[/code]. </description> <tutorials> @@ -189,21 +190,21 @@ <method name="normalized" qualifiers="const"> <return type="Vector4" /> <description> - Returns the vector scaled to unit length. Equivalent to [code]v / v.length()[/code]. + Returns the result of scaling the vector to unit length. Equivalent to [code]v / v.length()[/code]. </description> </method> <method name="posmod" qualifiers="const"> <return type="Vector4" /> <param index="0" name="mod" type="float" /> <description> - Returns a vector composed of the [method @GlobalScope.fposmod] of this vector's components and [param mod]. + Returns a new vector composed of the [method @GlobalScope.fposmod] of this vector's components and [param mod]. </description> </method> <method name="posmodv" qualifiers="const"> <return type="Vector4" /> <param index="0" name="modv" type="Vector4" /> <description> - Returns a vector composed of the [method @GlobalScope.fposmod] of this vector's components and [param modv]'s components. + Returns a new vector composed of the [method @GlobalScope.fposmod] of this vector's components and [param modv]'s components. </description> </method> <method name="round" qualifiers="const"> @@ -215,14 +216,14 @@ <method name="sign" qualifiers="const"> <return type="Vector4" /> <description> - Returns a new vector with each component set to one or negative one, depending on the signs of the components, or zero if the component is zero, by calling [method @GlobalScope.sign] on each component. + Returns a new vector with each component set to [code]1.0[/code] if it's positive, [code]-1.0[/code] if it's negative, and [code]0.0[/code] if it's zero. The result is identical to calling [method @GlobalScope.sign] on each component. </description> </method> <method name="snapped" qualifiers="const"> <return type="Vector4" /> <param index="0" name="step" type="Vector4" /> <description> - Returns this vector with each component snapped to the nearest multiple of [param step]. This can also be used to round to an arbitrary number of decimals. + Returns a new vector with each component snapped to the nearest multiple of the corresponding component in [param step]. This can also be used to round the components to an arbitrary number of decimals. </description> </method> </methods> diff --git a/doc/classes/Vector4i.xml b/doc/classes/Vector4i.xml index 3eea93ce1f..95797df90a 100644 --- a/doc/classes/Vector4i.xml +++ b/doc/classes/Vector4i.xml @@ -5,7 +5,7 @@ </brief_description> <description> 4-element structure that can be used to represent 4D grid coordinates or sets of integers. - It uses integer coordinates. See [Vector4] for its floating-point counterpart. + It uses integer coordinates and is therefore preferable to [Vector4] when exact precision is required. Note that the values are limited to 32 bits, and unlike [Vector4] this cannot be configured with an engine build option. Use [int] or [PackedInt64Array] if 64-bit values are needed. </description> <tutorials> </tutorials> @@ -83,7 +83,14 @@ <method name="sign" qualifiers="const"> <return type="Vector4i" /> <description> - Returns a new vector with each component set to one or negative one, depending on the signs of the components, or zero if the component is zero, by calling [method @GlobalScope.sign] on each component. + Returns a new vector with each component set to [code]1[/code] if it's positive, [code]-1[/code] if it's negative, and [code]0[/code] if it's zero. The result is identical to calling [method @GlobalScope.sign] on each component. + </description> + </method> + <method name="snapped" qualifiers="const"> + <return type="Vector4i" /> + <param index="0" name="step" type="Vector4i" /> + <description> + Returns a new vector with each component snapped to the closest multiple of the corresponding component in [param step]. </description> </method> </methods> @@ -133,12 +140,20 @@ <return type="Vector4i" /> <param index="0" name="right" type="Vector4i" /> <description> + Gets the remainder of each component of the [Vector4i] with the components of the given [Vector4i]. This operation uses truncated division, which is often not desired as it does not work well with negative numbers. Consider using [method @GlobalScope.posmod] instead if you want to handle negative numbers. + [codeblock] + print(Vector4i(10, -20, 30, -40) % Vector4i(7, 8, 9, 10)) # Prints "(3, -4, 3, 0)" + [/codeblock] </description> </operator> <operator name="operator %"> <return type="Vector4i" /> <param index="0" name="right" type="int" /> <description> + Gets the remainder of each component of the [Vector4i] with the the given [int]. This operation uses truncated division, which is often not desired as it does not work well with negative numbers. Consider using [method @GlobalScope.posmod] instead if you want to handle negative numbers. + [codeblock] + print(Vector4i(10, -20, 30, -40) % 7) # Prints "(3, -6, 2, -5)" + [/codeblock] </description> </operator> <operator name="operator *"> diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index fce94fe567..236d34383f 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -45,6 +45,13 @@ Returns the currently active 3D camera. </description> </method> + <method name="get_canvas_cull_mask_bit" qualifiers="const"> + <return type="bool" /> + <param index="0" name="layer" type="int" /> + <description> + Returns an individual bit on the rendering layer mask. + </description> + </method> <method name="get_final_transform" qualifiers="const"> <return type="Transform2D" /> <description> @@ -176,6 +183,14 @@ If none of the methods handle the event and [member physics_object_picking] is [code]true[/code], the event is used for physics object picking. </description> </method> + <method name="set_canvas_cull_mask_bit"> + <return type="void" /> + <param index="0" name="layer" type="int" /> + <param index="1" name="enable" type="bool" /> + <description> + Set/clear individual bits on the rendering layer mask. This simplifies editing this [Viewport]'s layers. + </description> + </method> <method name="set_input_as_handled"> <return type="void" /> <description> @@ -205,6 +220,9 @@ <member name="audio_listener_enable_3d" type="bool" setter="set_as_audio_listener_3d" getter="is_audio_listener_3d" default="false"> If [code]true[/code], the viewport will process 3D audio streams. </member> + <member name="canvas_cull_mask" type="int" setter="set_canvas_cull_mask" getter="get_canvas_cull_mask" default="4294967295"> + The rendering layers in which this [Viewport] renders [CanvasItem] nodes. + </member> <member name="canvas_item_default_texture_filter" type="int" setter="set_default_canvas_item_texture_filter" getter="get_default_canvas_item_texture_filter" enum="Viewport.DefaultCanvasItemTextureFilter" default="1"> Sets the default filter mode used by [CanvasItem]s in this Viewport. See [enum DefaultCanvasItemTextureFilter] for options. </member> @@ -306,6 +324,8 @@ If [code]true[/code], the viewport should render its background as transparent. </member> <member name="use_debanding" type="bool" setter="set_use_debanding" getter="is_using_debanding" default="false"> + If [code]true[/code], uses a fast post-processing filter to make banding significantly less visible in 3D. 2D rendering is [i]not[/i] affected by debanding unless the [member Environment.background_mode] is [constant Environment.BG_CANVAS]. See also [member ProjectSettings.rendering/anti_aliasing/quality/use_debanding]. + In some cases, debanding may introduce a slightly noticeable dithering pattern. It's recommended to enable debanding only when actually needed since the dithering pattern will make lossless-compressed screenshots larger. </member> <member name="use_occlusion_culling" type="bool" setter="set_use_occlusion_culling" getter="is_using_occlusion_culling" default="false"> If [code]true[/code], [OccluderInstance3D] nodes will be usable for occlusion culling in 3D for this viewport. For the root viewport, [member ProjectSettings.rendering/occlusion_culling/use_occlusion_culling] must be set to [code]true[/code] instead. @@ -323,6 +343,19 @@ </member> <member name="vrs_texture" type="Texture2D" setter="set_vrs_texture" getter="get_vrs_texture"> Texture to use when [member vrs_mode] is set to [constant Viewport.VRS_TEXTURE]. + The texture [i]must[/i] use a lossless compression format so that colors can be matched precisely. The following VRS densities are mapped to various colors, with brighter colors representing a lower level of shading precision: + [codeblock] + - 1x1 = rgb(0, 0, 0) - #000000 + - 1x2 = rgb(0, 85, 0) - #005500 + - 2x1 = rgb(85, 0, 0) - #550000 + - 2x2 = rgb(85, 85, 0) - #555500 + - 2x4 = rgb(85, 170, 0) - #55aa00 + - 4x2 = rgb(170, 85, 0) - #aa5500 + - 4x4 = rgb(170, 170, 0) - #aaaa00 + - 4x8 = rgb(170, 255, 0) - #aaff00 - Not supported on most hardware + - 8x4 = rgb(255, 170, 0) - #ffaa00 - Not supported on most hardware + - 8x8 = rgb(255, 255, 0) - #ffff00 - Not supported on most hardware + [/codeblock] </member> <member name="world_2d" type="World2D" setter="set_world_2d" getter="get_world_2d"> The custom [World2D] which can be used as 2D environment source. diff --git a/doc/classes/VisualInstance3D.xml b/doc/classes/VisualInstance3D.xml index 94e8c25660..31811f817b 100644 --- a/doc/classes/VisualInstance3D.xml +++ b/doc/classes/VisualInstance3D.xml @@ -56,7 +56,7 @@ </method> </methods> <members> - <member name="layers" type="int" setter="set_layer_mask" getter="get_layer_mask"> + <member name="layers" type="int" setter="set_layer_mask" getter="get_layer_mask" default="1"> The render layer(s) this [VisualInstance3D] is drawn on. This object will only be visible for [Camera3D]s whose cull mask includes the render object this [VisualInstance3D] is set to. For [Light3D]s, this can be used to control which [VisualInstance3D]s are affected by a specific light. For [GPUParticles3D], this can be used to control which particles are effected by a specific attractor. For [Decal]s, this can be used to control which [VisualInstance3D]s are affected by a specific decal. diff --git a/doc/classes/VisualShaderNodeFloatParameter.xml b/doc/classes/VisualShaderNodeFloatParameter.xml index c0fd88294a..3b5bf57b4d 100644 --- a/doc/classes/VisualShaderNodeFloatParameter.xml +++ b/doc/classes/VisualShaderNodeFloatParameter.xml @@ -16,7 +16,7 @@ Enables usage of the [member default_value]. </member> <member name="hint" type="int" setter="set_hint" getter="get_hint" enum="VisualShaderNodeFloatParameter.Hint" default="0"> - A hint applied to the uniform, which controls the values it can take when set through the inspector. + A hint applied to the uniform, which controls the values it can take when set through the Inspector. </member> <member name="max" type="float" setter="set_max" getter="get_max" default="1.0"> Minimum value for range hints. Used if [member hint] is set to [constant HINT_RANGE] or [constant HINT_RANGE_STEP]. diff --git a/doc/classes/VisualShaderNodeInput.xml b/doc/classes/VisualShaderNodeInput.xml index 6268a3fe09..2ebffcfe76 100644 --- a/doc/classes/VisualShaderNodeInput.xml +++ b/doc/classes/VisualShaderNodeInput.xml @@ -19,7 +19,7 @@ </methods> <members> <member name="input_name" type="String" setter="set_input_name" getter="get_input_name" default=""[None]""> - One of the several input constants in lower-case style like: "vertex"([code]VERTEX[/code]) or "point_size"([code]POINT_SIZE[/code]). + One of the several input constants in lower-case style like: "vertex" ([code]VERTEX[/code]) or "point_size" ([code]POINT_SIZE[/code]). </member> </members> <signals> diff --git a/doc/classes/VisualShaderNodeParameter.xml b/doc/classes/VisualShaderNodeParameter.xml index c66022f77d..55b10ac810 100644 --- a/doc/classes/VisualShaderNodeParameter.xml +++ b/doc/classes/VisualShaderNodeParameter.xml @@ -4,7 +4,7 @@ A base type for the parameters within the visual shader graph. </brief_description> <description> - A parameter represents a variable in the shader which is set externally, i.e. from the [ShaderMaterial]. Parameters are exposed as properties in the [ShaderMaterial] and can be assigned from the inspector or from a script. + A parameter represents a variable in the shader which is set externally, i.e. from the [ShaderMaterial]. Parameters are exposed as properties in the [ShaderMaterial] and can be assigned from the Inspector or from a script. </description> <tutorials> </tutorials> diff --git a/doc/classes/VoxelGIData.xml b/doc/classes/VoxelGIData.xml index 92b2e66e5a..bd9df18394 100644 --- a/doc/classes/VoxelGIData.xml +++ b/doc/classes/VoxelGIData.xml @@ -5,7 +5,7 @@ </brief_description> <description> [VoxelGIData] contains baked voxel global illumination for use in a [VoxelGI] node. [VoxelGIData] also offers several properties to adjust the final appearance of the global illumination. These properties can be adjusted at run-time without having to bake the [VoxelGI] node again. - [b]Note:[/b] To prevent text-based scene files ([code].tscn[/code]) from growing too much and becoming slow to load and save, always save [VoxelGIData] to an external binary resource file ([code].res[/code]) instead of embedding it within the scene. This can be done by clicking the dropdown arrow next to the [VoxelGIData] resource, choosing [b]Edit[/b], clicking the floppy disk icon at the top of the inspector then choosing [b]Save As...[/b]. + [b]Note:[/b] To prevent text-based scene files ([code].tscn[/code]) from growing too much and becoming slow to load and save, always save [VoxelGIData] to an external binary resource file ([code].res[/code]) instead of embedding it within the scene. This can be done by clicking the dropdown arrow next to the [VoxelGIData] resource, choosing [b]Edit[/b], clicking the floppy disk icon at the top of the Inspector then choosing [b]Save As...[/b]. </description> <tutorials> <link title="Third Person Shooter Demo">https://godotengine.org/asset-library/asset/678</link> diff --git a/doc/classes/Window.xml b/doc/classes/Window.xml index c278f7031f..8707ef003a 100644 --- a/doc/classes/Window.xml +++ b/doc/classes/Window.xml @@ -491,7 +491,7 @@ Minimized window mode, i.e. [Window] is not visible and available on window manager's window list. Normally happens when the minimize button is pressed. </constant> <constant name="MODE_MAXIMIZED" value="2" enum="Mode"> - Maximized window mode, i.e. [Window] will occupy whole screen area except task bar and still display its borders. Normally happens when the minimize button is pressed. + Maximized window mode, i.e. [Window] will occupy whole screen area except task bar and still display its borders. Normally happens when the maximize button is pressed. </constant> <constant name="MODE_FULLSCREEN" value="3" enum="Mode"> Full screen window mode. Note that this is not [i]exclusive[/i] full screen. On Windows and Linux, a borderless window is used to emulate full screen. On macOS, a new desktop is used to display the running project. diff --git a/doc/classes/XRInterface.xml b/doc/classes/XRInterface.xml index 3e48b8284a..05d5eb6673 100644 --- a/doc/classes/XRInterface.xml +++ b/doc/classes/XRInterface.xml @@ -32,7 +32,17 @@ <method name="get_play_area" qualifiers="const"> <return type="PackedVector3Array" /> <description> - Returns an array of vectors that denotes the physical play area mapped to the virtual space around the [XROrigin3D] point. The points form a convex polygon that can be used to react to or visualise the play area. This returns an empty array if this feature is not supported or if the information is not yet available. + Returns an array of vectors that denotes the physical play area mapped to the virtual space around the [XROrigin3D] point. The points form a convex polygon that can be used to react to or visualize the play area. This returns an empty array if this feature is not supported or if the information is not yet available. + </description> + </method> + <method name="get_projection_for_view"> + <return type="Projection" /> + <param index="0" name="view" type="int" /> + <param index="1" name="aspect" type="float" /> + <param index="2" name="near" type="float" /> + <param index="3" name="far" type="float" /> + <description> + Returns the projection matrix for a view/eye. </description> </method> <method name="get_render_target_size"> @@ -47,6 +57,16 @@ If supported, returns the status of our tracking. This will allow you to provide feedback to the user whether there are issues with positional tracking. </description> </method> + <method name="get_transform_for_view"> + <return type="Transform3D" /> + <param index="0" name="view" type="int" /> + <param index="1" name="cam_transform" type="Transform3D" /> + <description> + Returns the transform for a view/eye. + [param view] is the view/eye index. + [param cam_transform] is the transform that maps device coordinates to scene coordinates, typically the global_transform of the current XROrigin3D. + </description> + </method> <method name="get_view_count"> <return type="int" /> <description> @@ -66,7 +86,7 @@ <method name="is_initialized" qualifiers="const"> <return type="bool" /> <description> - Is [code]true[/code] if this interface has been initialised. + Is [code]true[/code] if this interface has been initialized. </description> </method> <method name="is_passthrough_enabled"> diff --git a/doc/classes/XRInterfaceExtension.xml b/doc/classes/XRInterfaceExtension.xml index 5958999037..0fe54e947f 100644 --- a/doc/classes/XRInterfaceExtension.xml +++ b/doc/classes/XRInterfaceExtension.xml @@ -138,14 +138,7 @@ <method name="_is_initialized" qualifiers="virtual const"> <return type="bool" /> <description> - Returns [code]true[/code] if this interface has been initialised. - </description> - </method> - <method name="_notification" qualifiers="virtual"> - <return type="void" /> - <param index="0" name="what" type="int" /> - <description> - Informs the interface of an applicable system notification. + Returns [code]true[/code] if this interface has been initialized. </description> </method> <method name="_post_draw_viewport" qualifiers="virtual"> diff --git a/doc/classes/float.xml b/doc/classes/float.xml index d7232bb0e9..a196021249 100644 --- a/doc/classes/float.xml +++ b/doc/classes/float.xml @@ -28,6 +28,13 @@ </constructor> <constructor name="float"> <return type="float" /> + <param index="0" name="from" type="String" /> + <description> + Converts a [String] to a [float], following the same rules as [method String.to_float]. + </description> + </constructor> + <constructor name="float"> + <return type="float" /> <param index="0" name="from" type="bool" /> <description> Cast a [bool] value to a floating-point value, [code]float(true)[/code] will be equal to 1.0 and [code]float(false)[/code] will be equal to 0.0. @@ -114,12 +121,17 @@ <return type="Vector4" /> <param index="0" name="right" type="Vector4" /> <description> + Multiplies each component of the [Vector4] by the given [float]. </description> </operator> <operator name="operator *"> <return type="Vector4" /> <param index="0" name="right" type="Vector4i" /> <description> + Multiplies each component of the [Vector4i] by the given [float]. Returns a [Vector4]. + [codeblock] + print(0.9 * Vector4i(10, 15, 20, -10)) # Prints "(9, 13.5, 18, -9)" + [/codeblock] </description> </operator> <operator name="operator *"> @@ -140,12 +152,20 @@ <return type="float" /> <param index="0" name="right" type="float" /> <description> + Raises a [float] to a power of a [float]. + [codeblock] + print(39.0625**0.25) # 2.5 + [/codeblock] </description> </operator> <operator name="operator **"> <return type="float" /> <param index="0" name="right" type="int" /> <description> + Raises a [float] to a power of an [int]. The result is a [float]. + [codeblock] + print(0.9**3) # 0.729 + [/codeblock] </description> </operator> <operator name="operator +"> diff --git a/doc/classes/int.xml b/doc/classes/int.xml index 868a8e9944..93fc8386c6 100644 --- a/doc/classes/int.xml +++ b/doc/classes/int.xml @@ -54,6 +54,13 @@ </constructor> <constructor name="int"> <return type="int" /> + <param index="0" name="from" type="String" /> + <description> + Converts a [String] to an [int], following the same rules as [method String.to_int]. + </description> + </constructor> + <constructor name="int"> + <return type="int" /> <param index="0" name="from" type="bool" /> <description> Cast a [bool] value to an integer value, [code]int(true)[/code] will be equals to 1 and [code]int(false)[/code] will be equals to 0. @@ -161,12 +168,14 @@ <return type="Vector4" /> <param index="0" name="right" type="Vector4" /> <description> + Multiplies each component of the [Vector4] by the given [int]. </description> </operator> <operator name="operator *"> <return type="Vector4i" /> <param index="0" name="right" type="Vector4i" /> <description> + Multiplies each component of the [Vector4i] by the given [int]. </description> </operator> <operator name="operator *"> @@ -187,19 +196,20 @@ <return type="float" /> <param index="0" name="right" type="float" /> <description> + Raises an [int] to a power of a [float]. The result is a [float]. + [codeblock] + print(8**0.25) # 1.68179283050743 + [/codeblock] </description> </operator> <operator name="operator **"> <return type="int" /> <param index="0" name="right" type="int" /> <description> - </description> - </operator> - <operator name="operator +"> - <return type="String" /> - <param index="0" name="right" type="String" /> - <description> - Adds Unicode character with code [int] to the [String]. + Raises an [int] to a power of a [int]. + [codeblock] + print(5**5) # 3125 + [/codeblock] </description> </operator> <operator name="operator +"> |