diff options
Diffstat (limited to 'doc/classes')
70 files changed, 427 insertions, 198 deletions
diff --git a/doc/classes/AcceptDialog.xml b/doc/classes/AcceptDialog.xml index 4adf515abc..db35b2f352 100644 --- a/doc/classes/AcceptDialog.xml +++ b/doc/classes/AcceptDialog.xml @@ -36,14 +36,14 @@ <return type="Label"> </return> <description> - Return the label used for built-in text. + Returns the label used for built-in text. </description> </method> <method name="get_ok"> <return type="Button"> </return> <description> - Return the OK Button. + Returns the OK Button. </description> </method> <method name="register_text_enter"> diff --git a/doc/classes/AnimatedSprite.xml b/doc/classes/AnimatedSprite.xml index 5e63f8aec0..da85f91367 100644 --- a/doc/classes/AnimatedSprite.xml +++ b/doc/classes/AnimatedSprite.xml @@ -13,7 +13,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if an animation if currently being played. + Returns [code]true[/code] if an animation if currently being played. </description> </method> <method name="play"> diff --git a/doc/classes/AnimatedSprite3D.xml b/doc/classes/AnimatedSprite3D.xml index 4c6868d807..96196f7601 100644 --- a/doc/classes/AnimatedSprite3D.xml +++ b/doc/classes/AnimatedSprite3D.xml @@ -13,7 +13,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if an animation if currently being played. + Returns [code]true[/code] if an animation if currently being played. </description> </method> <method name="play"> diff --git a/doc/classes/Animation.xml b/doc/classes/Animation.xml index af3abed256..9b322ac3f7 100644 --- a/doc/classes/Animation.xml +++ b/doc/classes/Animation.xml @@ -263,14 +263,14 @@ <argument index="0" name="path" type="NodePath"> </argument> <description> - Return the index of the specified track. If the track is not found, return -1. + Returns the index of the specified track. If the track is not found, return -1. </description> </method> <method name="get_track_count" qualifiers="const"> <return type="int"> </return> <description> - Return the amount of tracks in the animation. + Returns the amount of tracks in the animation. </description> </method> <method name="method_track_get_key_indices" qualifiers="const"> @@ -283,7 +283,7 @@ <argument index="2" name="delta" type="float"> </argument> <description> - Return all the key indices of a method track, given a position and delta time. + Returns all the key indices of a method track, given a position and delta time. </description> </method> <method name="method_track_get_name" qualifiers="const"> @@ -294,7 +294,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the method name of a method track. + Returns the method name of a method track. </description> </method> <method name="method_track_get_params" qualifiers="const"> @@ -305,7 +305,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the arguments values to be called on a method track for a given key in a given track. + Returns the arguments values to be called on a method track for a given key in a given track. </description> </method> <method name="remove_track"> @@ -345,7 +345,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the interpolation type of a given track, from the INTERPOLATION_* enum. + Returns the interpolation type of a given track, from the INTERPOLATION_* enum. </description> </method> <method name="track_get_key_count" qualifiers="const"> @@ -354,7 +354,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the amount of keys in a given track. + Returns the amount of keys in a given track. </description> </method> <method name="track_get_key_time" qualifiers="const"> @@ -365,7 +365,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the time at which the key is located. + Returns the time at which the key is located. </description> </method> <method name="track_get_key_transition" qualifiers="const"> @@ -376,7 +376,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the transition curve (easing) for a specific key (see built-in math function "ease"). + Returns the transition curve (easing) for a specific key (see built-in math function "ease"). </description> </method> <method name="track_get_key_value" qualifiers="const"> @@ -387,7 +387,7 @@ <argument index="1" name="key_idx" type="int"> </argument> <description> - Return the value of a given key in a given track. + Returns the value of a given key in a given track. </description> </method> <method name="track_get_path" qualifiers="const"> @@ -438,7 +438,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return [code]true[/code] if the given track is imported. Else, return [code]false[/code]. + Returns [code]true[/code] if the given track is imported. Else, return [code]false[/code]. </description> </method> <method name="track_move_down"> @@ -598,7 +598,7 @@ <argument index="1" name="time_sec" type="float"> </argument> <description> - Return the interpolated value of a transform track at a given time (in seconds). An array consisting of 3 elements: position ([Vector3]), rotation ([Quat]) and scale ([Vector3]). + Returns the interpolated value of a transform track at a given time (in seconds). An array consisting of 3 elements: position ([Vector3]), rotation ([Quat]) and scale ([Vector3]). </description> </method> <method name="value_track_get_key_indices" qualifiers="const"> @@ -611,7 +611,7 @@ <argument index="2" name="delta" type="float"> </argument> <description> - Return all the key indices of a value track, given a position and delta time. + Returns all the key indices of a value track, given a position and delta time. </description> </method> <method name="value_track_get_update_mode" qualifiers="const"> @@ -620,7 +620,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the update mode of a value track. + Returns the update mode of a value track. </description> </method> <method name="value_track_set_update_mode"> diff --git a/doc/classes/AnimationNode.xml b/doc/classes/AnimationNode.xml index c1307be924..9854d4c27e 100644 --- a/doc/classes/AnimationNode.xml +++ b/doc/classes/AnimationNode.xml @@ -144,7 +144,7 @@ <return type="String"> </return> <description> - Return [code]true[/code] whether you want the blend tree editor to display filter editing on this node. + Returns [code]true[/code] whether you want the blend tree editor to display filter editing on this node. </description> </method> <method name="is_path_filtered" qualifiers="const"> @@ -153,7 +153,7 @@ <argument index="0" name="path" type="NodePath"> </argument> <description> - Return [code]true[/code] whether a given path is filtered. + Returns [code]true[/code] whether a given path is filtered. </description> </method> <method name="process" qualifiers="virtual"> @@ -204,7 +204,7 @@ </methods> <members> <member name="filter_enabled" type="bool" setter="set_filter_enabled" getter="is_filter_enabled"> - Return whether filtering is enabled. + Returns whether filtering is enabled. </member> </members> <signals> diff --git a/doc/classes/AnimationNodeStateMachine.xml b/doc/classes/AnimationNodeStateMachine.xml index 8f4e6dff69..2834f83d2f 100644 --- a/doc/classes/AnimationNodeStateMachine.xml +++ b/doc/classes/AnimationNodeStateMachine.xml @@ -1,12 +1,13 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="AnimationNodeStateMachine" inherits="AnimationRootNode" category="Core" version="3.2"> <brief_description> + State machine for control of animations. </brief_description> <description> - Contains multiple root nodes as children in a graph. Each node is used as a state, and provides multiple functions to alternate between states. Retrieve the AnimationNodeStateMachinePlayback object from the [AnimationTree] node to control it programmatically. + Contains multiple nodes representing animation states, connected in a graph. Nodes transitions can be configured to happen automatically or via code, using a shortest-path algorithm. Retrieve the AnimationNodeStateMachinePlayback object from the [AnimationTree] node to control it programatically. Example: [codeblock] - var state_machine = anim_tree["parameters/StateMachine/playback"] - state_machine.travel("SomeState") + var state_machine = $AnimationTree.get("parameters/playback") + state_machine.travel("some_state") [/codeblock] </description> <tutorials> @@ -22,6 +23,7 @@ <argument index="2" name="position" type="Vector2" default="Vector2( 0, 0 )"> </argument> <description> + Adds a new node to the graph. The [code]position[/code] is used for display in the editor. </description> </method> <method name="add_transition"> @@ -34,18 +36,21 @@ <argument index="2" name="transition" type="AnimationNodeStateMachineTransition"> </argument> <description> + Adds a transition between the given nodes. </description> </method> <method name="get_end_node" qualifiers="const"> <return type="String"> </return> <description> + Returns the graph's end node. </description> </method> <method name="get_graph_offset" qualifiers="const"> <return type="Vector2"> </return> <description> + Returns the draw offset of the graph. Used for display in the editor. </description> </method> <method name="get_node" qualifiers="const"> @@ -54,6 +59,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Returns the animation node with the given name. </description> </method> <method name="get_node_name" qualifiers="const"> @@ -62,6 +68,7 @@ <argument index="0" name="node" type="AnimationNode"> </argument> <description> + Returns the given animation node's name. </description> </method> <method name="get_node_position" qualifiers="const"> @@ -70,12 +77,14 @@ <argument index="0" name="name" type="String"> </argument> <description> + Returns the given node's coordinates. Used for display in the editor. </description> </method> <method name="get_start_node" qualifiers="const"> <return type="String"> </return> <description> + Returns the graph's end node. </description> </method> <method name="get_transition" qualifiers="const"> @@ -84,12 +93,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> + Returns the given transition. </description> </method> <method name="get_transition_count" qualifiers="const"> <return type="int"> </return> <description> + Returns the number of connections in the graph. </description> </method> <method name="get_transition_from" qualifiers="const"> @@ -98,6 +109,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> + Returns the given transition's start node. </description> </method> <method name="get_transition_to" qualifiers="const"> @@ -106,6 +118,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> + Returns the given transition's end node. </description> </method> <method name="has_node" qualifiers="const"> @@ -114,6 +127,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Returns [code]true[/code] if the graph contains the given node. </description> </method> <method name="has_transition" qualifiers="const"> @@ -124,6 +138,7 @@ <argument index="1" name="to" type="String"> </argument> <description> + Returns [code]true[/code] if there is a transition between the given nodes. </description> </method> <method name="remove_node"> @@ -132,6 +147,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Deletes the given node from the graph. </description> </method> <method name="remove_transition"> @@ -142,6 +158,7 @@ <argument index="1" name="to" type="String"> </argument> <description> + Deletes the given transition. </description> </method> <method name="remove_transition_by_index"> @@ -150,6 +167,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> + Deletes the given transition. </description> </method> <method name="rename_node"> @@ -160,6 +178,7 @@ <argument index="1" name="new_name" type="String"> </argument> <description> + Renames the given node. </description> </method> <method name="set_end_node"> @@ -168,6 +187,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Sets the given node as the graph end point. </description> </method> <method name="set_graph_offset"> @@ -176,6 +196,7 @@ <argument index="0" name="offset" type="Vector2"> </argument> <description> + Sets the draw offset of the graph. Used for display in the editor. </description> </method> <method name="set_node_position"> @@ -186,6 +207,7 @@ <argument index="1" name="position" type="Vector2"> </argument> <description> + Sets the node's coordinates. Used for display in the editor. </description> </method> <method name="set_start_node"> @@ -194,6 +216,7 @@ <argument index="0" name="name" type="String"> </argument> <description> + Sets the given node as the graph start point. </description> </method> </methods> diff --git a/doc/classes/AnimationNodeStateMachinePlayback.xml b/doc/classes/AnimationNodeStateMachinePlayback.xml index fd38c28b16..796d92d7d6 100644 --- a/doc/classes/AnimationNodeStateMachinePlayback.xml +++ b/doc/classes/AnimationNodeStateMachinePlayback.xml @@ -1,8 +1,14 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="AnimationNodeStateMachinePlayback" inherits="Resource" category="Core" version="3.2"> <brief_description> + Playback control for AnimationNodeStateMachine. </brief_description> <description> + Allows control of [AnimationTree] state machines created with [AnimationNodeStateMachine]. Retrieve with [code]$AnimationTree.get("parameters/playback")[/code]. Example: + [codeblock] + var state_machine = $AnimationTree.get("parameters/playback") + state_machine.travel("some_state") + [/codeblock] </description> <tutorials> </tutorials> @@ -11,6 +17,7 @@ <return type="String"> </return> <description> + Returns the currently playing animation state. </description> </method> <method name="get_travel_path" qualifiers="const"> @@ -23,6 +30,7 @@ <return type="bool"> </return> <description> + Returns [code]true[/code] if an animation is playing. </description> </method> <method name="start"> @@ -31,12 +39,14 @@ <argument index="0" name="node" type="String"> </argument> <description> + Starts playing the given animation. </description> </method> <method name="stop"> <return type="void"> </return> <description> + Stops the currently playing animation. </description> </method> <method name="travel"> @@ -45,7 +55,7 @@ <argument index="0" name="to_node" type="String"> </argument> <description> - Transition from the current state to another one, while visiting all the intermediate ones. This is done via the A* algorithm. + Transitions from the current state to another one, following the shortest path. </description> </method> </methods> diff --git a/doc/classes/AnimationTreePlayer.xml b/doc/classes/AnimationTreePlayer.xml index 6160b44076..818565e0dc 100644 --- a/doc/classes/AnimationTreePlayer.xml +++ b/doc/classes/AnimationTreePlayer.xml @@ -256,7 +256,7 @@ <argument index="0" name="id" type="String"> </argument> <description> - Return the input count for a given node. Different types of nodes have different amount of inputs. + Returns the input count for a given node. Different types of nodes have different amount of inputs. </description> </method> <method name="node_get_input_source" qualifiers="const"> @@ -267,7 +267,7 @@ <argument index="1" name="idx" type="int"> </argument> <description> - Return the input source for a given node input. + Returns the input source for a given node input. </description> </method> <method name="node_get_position" qualifiers="const"> diff --git a/doc/classes/Area2D.xml b/doc/classes/Area2D.xml index 2400efe0d3..8d28ddc889 100644 --- a/doc/classes/Area2D.xml +++ b/doc/classes/Area2D.xml @@ -15,7 +15,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Return an individual bit on the layer mask. Describes whether other areas will collide with this one on the given layer. + Returns an individual bit on the layer mask. Describes whether other areas will collide with this one on the given layer. </description> </method> <method name="get_collision_mask_bit" qualifiers="const"> @@ -24,7 +24,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Return an individual bit on the collision mask. Describes whether this area will collide with others on the given layer. + Returns an individual bit on the collision mask. Describes whether this area will collide with others on the given layer. </description> </method> <method name="get_overlapping_areas" qualifiers="const"> diff --git a/doc/classes/ArrayMesh.xml b/doc/classes/ArrayMesh.xml index db0fc77b25..1707ea07e0 100644 --- a/doc/classes/ArrayMesh.xml +++ b/doc/classes/ArrayMesh.xml @@ -98,7 +98,7 @@ <argument index="0" name="name" type="String"> </argument> <description> - Return the index of the first surface with this name held within this [ArrayMesh]. If none are found -1 is returned. + Returns the index of the first surface with this name held within this [ArrayMesh]. If none are found -1 is returned. </description> </method> <method name="surface_get_array_index_len" qualifiers="const"> @@ -107,7 +107,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return the length in indices of the index array in the requested surface (see [method add_surface_from_arrays]). + Returns the length in indices of the index array in the requested surface (see [method add_surface_from_arrays]). </description> </method> <method name="surface_get_array_len" qualifiers="const"> @@ -116,7 +116,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return the length in vertices of the vertex array in the requested surface (see [method add_surface_from_arrays]). + Returns the length in vertices of the vertex array in the requested surface (see [method add_surface_from_arrays]). </description> </method> <method name="surface_get_format" qualifiers="const"> @@ -125,7 +125,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return the format mask of the requested surface (see [method add_surface_from_arrays]). + Returns the format mask of the requested surface (see [method add_surface_from_arrays]). </description> </method> <method name="surface_get_name" qualifiers="const"> @@ -143,7 +143,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return the primitive type of the requested surface (see [method add_surface_from_arrays]). + Returns the primitive type of the requested surface (see [method add_surface_from_arrays]). </description> </method> <method name="surface_remove"> diff --git a/doc/classes/BaseButton.xml b/doc/classes/BaseButton.xml index 7bd346ed5a..6d1a7a8f87 100644 --- a/doc/classes/BaseButton.xml +++ b/doc/classes/BaseButton.xml @@ -29,14 +29,14 @@ <return type="int" enum="BaseButton.DrawMode"> </return> <description> - Return the visual state used to draw the button. This is useful mainly when implementing your own draw code by either overriding _draw() or connecting to "draw" signal. The visual state of the button is defined by the DRAW_* enum. + Returns the visual state used to draw the button. This is useful mainly when implementing your own draw code by either overriding _draw() or connecting to "draw" signal. The visual state of the button is defined by the DRAW_* enum. </description> </method> <method name="is_hovered" qualifiers="const"> <return type="bool"> </return> <description> - Return [code]true[/code] if the mouse has entered the button and has not left it yet. + Returns [code]true[/code] if the mouse has entered the button and has not left it yet. </description> </method> </methods> diff --git a/doc/classes/Basis.xml b/doc/classes/Basis.xml index cee3035eab..ae7a3ff323 100644 --- a/doc/classes/Basis.xml +++ b/doc/classes/Basis.xml @@ -57,7 +57,7 @@ <return type="float"> </return> <description> - Return the determinant of the matrix. + Returns the determinant of the matrix. </description> </method> <method name="get_euler"> @@ -91,7 +91,7 @@ <return type="Basis"> </return> <description> - Return the inverse of the matrix. + Returns the inverse of the matrix. </description> </method> <method name="is_equal_approx"> @@ -108,7 +108,7 @@ <return type="Basis"> </return> <description> - Return the orthonormalized version of the matrix (useful to call from time to time to avoid rounding error for orthogonal matrices). This performs a Gram-Schmidt orthonormalization on the basis of the matrix. + Returns the orthonormalized version of the matrix (useful to call from time to time to avoid rounding error for orthogonal matrices). This performs a Gram-Schmidt orthonormalization on the basis of the matrix. </description> </method> <method name="rotated"> @@ -173,7 +173,7 @@ <return type="Basis"> </return> <description> - Return the transposed version of the matrix. + Returns the transposed version of the matrix. </description> </method> <method name="xform"> @@ -182,7 +182,7 @@ <argument index="0" name="v" type="Vector3"> </argument> <description> - Return a vector transformed (multiplied) by the matrix. + Returns a vector transformed (multiplied) by the matrix. </description> </method> <method name="xform_inv"> @@ -191,7 +191,7 @@ <argument index="0" name="v" type="Vector3"> </argument> <description> - Return a vector transformed (multiplied) by the transposed matrix. Note that this results in a multiplication by the inverse of the matrix only if it represents a rotation-reflection. + Returns a vector transformed (multiplied) by the transposed matrix. Note that this results in a multiplication by the inverse of the matrix only if it represents a rotation-reflection. </description> </method> </methods> diff --git a/doc/classes/Camera2D.xml b/doc/classes/Camera2D.xml index e5d1649c29..fcc99123d2 100644 --- a/doc/classes/Camera2D.xml +++ b/doc/classes/Camera2D.xml @@ -35,7 +35,7 @@ <return type="Vector2"> </return> <description> - Return the camera position. + Returns the camera position. </description> </method> <method name="get_camera_screen_center" qualifiers="const"> diff --git a/doc/classes/CanvasItem.xml b/doc/classes/CanvasItem.xml index 8ba3990933..2426471a49 100644 --- a/doc/classes/CanvasItem.xml +++ b/doc/classes/CanvasItem.xml @@ -342,14 +342,14 @@ <return type="RID"> </return> <description> - Return the [RID] of the [World2D] canvas where this item is in. + Returns the [RID] of the [World2D] canvas where this item is in. </description> </method> <method name="get_canvas_item" qualifiers="const"> <return type="RID"> </return> <description> - Return the canvas item RID used by [VisualServer] for this item. + Returns the canvas item RID used by [VisualServer] for this item. </description> </method> <method name="get_canvas_transform" qualifiers="const"> diff --git a/doc/classes/ClassDB.xml b/doc/classes/ClassDB.xml index b029c85409..ddbe66380a 100644 --- a/doc/classes/ClassDB.xml +++ b/doc/classes/ClassDB.xml @@ -121,7 +121,7 @@ <argument index="1" name="name" type="String"> </argument> <description> - Return whether 'class' or its ancestry has an integer constant called 'name' or not. + Returns whether 'class' or its ancestry has an integer constant called 'name' or not. </description> </method> <method name="class_has_method" qualifiers="const"> @@ -134,7 +134,7 @@ <argument index="2" name="no_inheritance" type="bool" default="false"> </argument> <description> - Return whether 'class' (or its ancestry if 'no_inheritance' is false) has a method called 'method' or not. + Returns whether 'class' (or its ancestry if 'no_inheritance' is false) has a method called 'method' or not. </description> </method> <method name="class_has_signal" qualifiers="const"> @@ -145,7 +145,7 @@ <argument index="1" name="signal" type="String"> </argument> <description> - Return whether 'class' or its ancestry has a signal called 'signal' or not. + Returns whether 'class' or its ancestry has a signal called 'signal' or not. </description> </method> <method name="class_set_property" qualifiers="const"> diff --git a/doc/classes/ColorPicker.xml b/doc/classes/ColorPicker.xml index a58edb5ca8..32e6014c75 100644 --- a/doc/classes/ColorPicker.xml +++ b/doc/classes/ColorPicker.xml @@ -31,7 +31,7 @@ <return type="PoolColorArray"> </return> <description> - Return the list of colors in the presets of the color picker. + Returns the list of colors in the presets of the color picker. </description> </method> </methods> diff --git a/doc/classes/ConcavePolygonShape.xml b/doc/classes/ConcavePolygonShape.xml index afc6ce74a5..62d42f4eb4 100644 --- a/doc/classes/ConcavePolygonShape.xml +++ b/doc/classes/ConcavePolygonShape.xml @@ -13,7 +13,7 @@ <return type="PoolVector3Array"> </return> <description> - Return the faces (an array of triangles). + Returns the faces (an array of triangles). </description> </method> <method name="set_faces"> diff --git a/doc/classes/ConfirmationDialog.xml b/doc/classes/ConfirmationDialog.xml index f39915f4b7..6124bc29b0 100644 --- a/doc/classes/ConfirmationDialog.xml +++ b/doc/classes/ConfirmationDialog.xml @@ -13,7 +13,7 @@ <return type="Button"> </return> <description> - Return the cancel button. + Returns the cancel button. </description> </method> </methods> diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index f888e1ee09..22061322c8 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -221,7 +221,7 @@ <argument index="0" name="position" type="Vector2"> </argument> <description> - Godot calls this method to get data that can be dragged and dropped onto controls that expect drop data. Return null if there is no data to drag. Controls that want to receive drop data should implement [method can_drop_data] and [method drop_data]. [code]position[/code] is local to this control. Drag may be forced with [method force_drag]. + Godot calls this method to get data that can be dragged and dropped onto controls that expect drop data. Returns null if there is no data to drag. Controls that want to receive drop data should implement [method can_drop_data] and [method drop_data]. [code]position[/code] is local to this control. Drag may be forced with [method force_drag]. A preview that will follow the mouse that should represent the data can be set with [method set_drag_preview]. A good time to set the preview is in this method. [codeblock] extends Control diff --git a/doc/classes/Dictionary.xml b/doc/classes/Dictionary.xml index b6b17d03fb..ec70fd311b 100644 --- a/doc/classes/Dictionary.xml +++ b/doc/classes/Dictionary.xml @@ -38,7 +38,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if the dictionary is empty. + Returns [code]true[/code] if the dictionary is empty. </description> </method> <method name="erase"> @@ -67,7 +67,7 @@ <argument index="0" name="key" type="Variant"> </argument> <description> - Return [code]true[/code] if the dictionary has a given key. + Returns [code]true[/code] if the dictionary has a given key. </description> </method> <method name="has_all"> @@ -76,35 +76,35 @@ <argument index="0" name="keys" type="Array"> </argument> <description> - Return [code]true[/code] if the dictionary has all of the keys in the given array. + Returns [code]true[/code] if the dictionary has all of the keys in the given array. </description> </method> <method name="hash"> <return type="int"> </return> <description> - Return a hashed integer value representing the dictionary contents. + Returns a hashed integer value representing the dictionary contents. </description> </method> <method name="keys"> <return type="Array"> </return> <description> - Return the list of keys in the [Dictionary]. + Returns the list of keys in the [Dictionary]. </description> </method> <method name="size"> <return type="int"> </return> <description> - Return the size of the dictionary (in pairs). + Returns the size of the dictionary (in pairs). </description> </method> <method name="values"> <return type="Array"> </return> <description> - Return the list of values in the [Dictionary]. + Returns the list of values in the [Dictionary]. </description> </method> </methods> diff --git a/doc/classes/Directory.xml b/doc/classes/Directory.xml index 8a81695198..54aac33652 100644 --- a/doc/classes/Directory.xml +++ b/doc/classes/Directory.xml @@ -52,7 +52,7 @@ <return type="bool"> </return> <description> - Return whether the current item processed with the last [method get_next] call is a directory ([code].[/code] and [code]..[/code] are considered directories). + Returns whether the current item processed with the last [method get_next] call is a directory ([code].[/code] and [code]..[/code] are considered directories). </description> </method> <method name="dir_exists"> @@ -61,7 +61,7 @@ <argument index="0" name="path" type="String"> </argument> <description> - Return whether the target directory exists. The argument can be relative to the current directory, or an absolute path. + Returns whether the target directory exists. The argument can be relative to the current directory, or an absolute path. </description> </method> <method name="file_exists"> @@ -70,14 +70,14 @@ <argument index="0" name="path" type="String"> </argument> <description> - Return whether the target file exists. The argument can be relative to the current directory, or an absolute path. + Returns whether the target file exists. The argument can be relative to the current directory, or an absolute path. </description> </method> <method name="get_current_dir"> <return type="String"> </return> <description> - Return the absolute path to the currently opened directory (e.g. [code]res://folder[/code] or [code]C:\tmp\folder[/code]). + Returns the absolute path to the currently opened directory (e.g. [code]res://folder[/code] or [code]C:\tmp\folder[/code]). </description> </method> <method name="get_current_drive"> @@ -107,7 +107,7 @@ <return type="String"> </return> <description> - Return the next element (file or directory) in the current directory (including [code].[/code] and [code]..[/code], unless [code]skip_navigational[/code] was given to [method list_dir_begin]). + Returns the next element (file or directory) in the current directory (including [code].[/code] and [code]..[/code], unless [code]skip_navigational[/code] was given to [method list_dir_begin]). The name of the file or directory is returned (and not its full path). Once the stream has been fully processed, the method returns an empty String and closes the stream automatically (i.e. [method list_dir_end] would not be mandatory in such a case). </description> </method> @@ -155,7 +155,7 @@ </argument> <description> Create a target directory and all necessary intermediate directories in its path, by calling [method make_dir] recursively. The argument can be relative to the current directory, or an absolute path. - Return one of the error code constants defined in [@GlobalScope] (OK, FAILED or ERR_*). + Returns one of the error code constants defined in [@GlobalScope] (OK, FAILED or ERR_*). </description> </method> <method name="open"> @@ -175,7 +175,7 @@ </argument> <description> Delete the target file or an empty directory. The argument can be relative to the current directory, or an absolute path. If the target directory is not empty, the operation will fail. - Return one of the error code constants defined in [@GlobalScope] (OK or FAILED). + Returns one of the error code constants defined in [@GlobalScope] (OK or FAILED). </description> </method> <method name="rename"> @@ -187,7 +187,7 @@ </argument> <description> Rename (move) the [i]from[/i] file to the [i]to[/i] destination. Both arguments should be paths to files, either relative or absolute. If the destination file exists and is not access-protected, it will be overwritten. - Return one of the error code constants defined in [@GlobalScope] (OK or FAILED). + Returns one of the error code constants defined in [@GlobalScope] (OK or FAILED). </description> </method> </methods> diff --git a/doc/classes/EditorExportPlugin.xml b/doc/classes/EditorExportPlugin.xml index 998b05d495..4e4e29dc4e 100644 --- a/doc/classes/EditorExportPlugin.xml +++ b/doc/classes/EditorExportPlugin.xml @@ -21,6 +21,12 @@ <description> </description> </method> + <method name="_export_end" qualifiers="virtual"> + <return type="void"> + </return> + <description> + </description> + </method> <method name="_export_file" qualifiers="virtual"> <return type="void"> </return> diff --git a/doc/classes/EditorFileSystem.xml b/doc/classes/EditorFileSystem.xml index 531af4c4e0..1c7a68fc0b 100644 --- a/doc/classes/EditorFileSystem.xml +++ b/doc/classes/EditorFileSystem.xml @@ -38,14 +38,14 @@ <return type="float"> </return> <description> - Return the scan progress for 0 to 1 if the FS is being scanned. + Returns the scan progress for 0 to 1 if the FS is being scanned. </description> </method> <method name="is_scanning" qualifiers="const"> <return type="bool"> </return> <description> - Return [code]true[/code] of the filesystem is being scanned. + Returns [code]true[/code] of the filesystem is being scanned. </description> </method> <method name="scan"> diff --git a/doc/classes/EditorInspectorPlugin.xml b/doc/classes/EditorInspectorPlugin.xml index da23218bdc..c2b13ff89e 100644 --- a/doc/classes/EditorInspectorPlugin.xml +++ b/doc/classes/EditorInspectorPlugin.xml @@ -54,7 +54,7 @@ <argument index="0" name="object" type="Object"> </argument> <description> - Return true if this object can be handled by this plugin. + Returns true if this object can be handled by this plugin. </description> </method> <method name="parse_begin" qualifiers="virtual"> diff --git a/doc/classes/EditorPlugin.xml b/doc/classes/EditorPlugin.xml index 5763d26561..97ad4f6829 100644 --- a/doc/classes/EditorPlugin.xml +++ b/doc/classes/EditorPlugin.xml @@ -241,7 +241,7 @@ <return type="EditorInterface"> </return> <description> - Return the [EditorInterface] object that gives you control over Godot editor's window and its functionalities. + Returns the [EditorInterface] object that gives you control over Godot editor's window and its functionalities. </description> </method> <method name="get_plugin_icon" qualifiers="virtual"> @@ -299,7 +299,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if this is a main screen editor plugin (it goes in the workspaces selector together with '2D', '3D', and 'Script'). + Returns [code]true[/code] if this is a main screen editor plugin (it goes in the workspaces selector together with '2D', '3D', and 'Script'). </description> </method> <method name="hide_bottom_panel"> diff --git a/doc/classes/EditorResourcePreviewGenerator.xml b/doc/classes/EditorResourcePreviewGenerator.xml index 76b9445933..156cc62941 100644 --- a/doc/classes/EditorResourcePreviewGenerator.xml +++ b/doc/classes/EditorResourcePreviewGenerator.xml @@ -57,7 +57,7 @@ <argument index="0" name="type" type="String"> </argument> <description> - Return if your generator supports this resource type. + Returns if your generator supports this resource type. </description> </method> </methods> diff --git a/doc/classes/EditorSpatialGizmo.xml b/doc/classes/EditorSpatialGizmo.xml index da7fee1cf7..5d5c37b212 100644 --- a/doc/classes/EditorSpatialGizmo.xml +++ b/doc/classes/EditorSpatialGizmo.xml @@ -123,7 +123,7 @@ <return type="EditorSpatialGizmoPlugin"> </return> <description> - Return the [EditorSpatialGizmoPlugin] that owns this gizmo. It's useful to retrieve materials using [method EditorSpatialGizmoPlugin.get_material]. + Returns the [EditorSpatialGizmoPlugin] that owns this gizmo. It's useful to retrieve materials using [method EditorSpatialGizmoPlugin.get_material]. </description> </method> <method name="get_spatial_node" qualifiers="const"> diff --git a/doc/classes/FileDialog.xml b/doc/classes/FileDialog.xml index 66e6fa5314..953f364bdb 100644 --- a/doc/classes/FileDialog.xml +++ b/doc/classes/FileDialog.xml @@ -43,7 +43,7 @@ <return type="VBoxContainer"> </return> <description> - Return the vertical box container of the dialog, custom controls can be added to it. + Returns the vertical box container of the dialog, custom controls can be added to it. </description> </method> <method name="invalidate"> diff --git a/doc/classes/Font.xml b/doc/classes/Font.xml index 5792b539e0..d65dad9fe1 100644 --- a/doc/classes/Font.xml +++ b/doc/classes/Font.xml @@ -51,21 +51,21 @@ <return type="float"> </return> <description> - Return the font ascent (number of pixels above the baseline). + Returns the font ascent (number of pixels above the baseline). </description> </method> <method name="get_descent" qualifiers="const"> <return type="float"> </return> <description> - Return the font descent (number of pixels below the baseline). + Returns the font descent (number of pixels below the baseline). </description> </method> <method name="get_height" qualifiers="const"> <return type="float"> </return> <description> - Return the total font height (ascent plus descent) in pixels. + Returns the total font height (ascent plus descent) in pixels. </description> </method> <method name="get_string_size" qualifiers="const"> @@ -74,7 +74,7 @@ <argument index="0" name="string" type="String"> </argument> <description> - Return the size of a string, taking kerning and advance into account. + Returns the size of a string, taking kerning and advance into account. </description> </method> <method name="get_wordwrap_string_size" qualifiers="const"> diff --git a/doc/classes/Geometry.xml b/doc/classes/Geometry.xml index 68539d7ecb..e2ba3fb7b0 100644 --- a/doc/classes/Geometry.xml +++ b/doc/classes/Geometry.xml @@ -59,6 +59,29 @@ Clips the polygon defined by the points in [code]points[/code] against the [code]plane[/code] and returns the points of the clipped polygon. </description> </method> + <method name="clip_polygons_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon_a" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon_b" type="PoolVector2Array"> + </argument> + <description> + Clips [code]polygon_a[/code] against [code]polygon_b[/code] and returns an array of clipped polygons. This performs [code]OPERATION_DIFFERENCE[/code] between polygons. Returns an empty array if [code]polygon_b[/code] completely overlaps [code]polygon_a[/code]. + If [code]polygon_b[/code] is enclosed by [code]polygon_a[/code], returns an outer polygon (boundary) and inner polygon (hole) which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> + <method name="clip_polyline_with_polygon_2d"> + <return type="Array"> + </return> + <argument index="0" name="polyline" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon" type="PoolVector2Array"> + </argument> + <description> + Clips [code]polyline[/code] against [code]polygon[/code] and returns an array of clipped polylines. This performs [code]OPERATION_DIFFERENCE[/code] between the polyline and the polygon. This operation can be thought of as cutting a line with a closed shape. + </description> + </method> <method name="convex_hull_2d"> <return type="PoolVector2Array"> </return> @@ -68,6 +91,18 @@ Given an array of [Vector2]s, returns the convex hull as a list of points in counter-clockwise order. The last point is the same as the first one. </description> </method> + <method name="exclude_polygons_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon_a" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon_b" type="PoolVector2Array"> + </argument> + <description> + Mutually excludes common area defined by intersection of [code]polygon_a[/code] and [code]polygon_b[/code] (see [method intersect_polygons_2d]) and returns an array of excluded polygons. This performs [code]OPERATION_XOR[/code] between polygons. In other words, returns all but common area between polygons. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> <method name="get_closest_point_to_segment"> <return type="Vector3"> </return> @@ -158,6 +193,38 @@ <description> </description> </method> + <method name="intersect_polygons_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon_a" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon_b" type="PoolVector2Array"> + </argument> + <description> + Intersects [code]polygon_a[/code] with [code]polygon_b[/code] and returns an array of intersected polygons. This performs [code]OPERATION_INTERSECTION[/code] between polygons. In other words, returns common area shared by polygons. Returns an empty array if no intersection occurs. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> + <method name="intersect_polyline_with_polygon_2d"> + <return type="Array"> + </return> + <argument index="0" name="polyline" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon" type="PoolVector2Array"> + </argument> + <description> + Intersects [code]polyline[/code] with [code]polygon[/code] and returns an array of intersected polylines. This performs [code]OPERATION_INTERSECTION[/code] between the polyline and the polygon. This operation can be thought of as chopping a line with a closed shape. + </description> + </method> + <method name="is_polygon_clockwise"> + <return type="bool"> + </return> + <argument index="0" name="polygon" type="PoolVector2Array"> + </argument> + <description> + Returns [code]true[/code] if [code]polygon[/code]'s vertices are ordered in clockwise order, otherwise returns [code]false[/code]. + </description> + </method> <method name="line_intersects_line_2d"> <return type="Variant"> </return> @@ -182,6 +249,51 @@ Given an array of [Vector2]s representing tiles, builds an atlas. The returned dictionary has two keys: [code]points[/code] is a vector of [Vector2] that specifies the positions of each tile, [code]size[/code] contains the overall size of the whole atlas as [Vector2]. </description> </method> + <method name="merge_polygons_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon_a" type="PoolVector2Array"> + </argument> + <argument index="1" name="polygon_b" type="PoolVector2Array"> + </argument> + <description> + Merges (combines) [code]polygon_a[/code] and [code]polygon_b[/code] and returns an array of merged polygons. This performs [code]OPERATION_UNION[/code] between polygons. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> + <method name="offset_polygon_2d"> + <return type="Array"> + </return> + <argument index="0" name="polygon" type="PoolVector2Array"> + </argument> + <argument index="1" name="delta" type="float"> + </argument> + <argument index="2" name="join_type" type="int" enum="Geometry.PolyJoinType" default="0"> + </argument> + <description> + Inflates or deflates [code]polygon[/code] by [code]delta[/code] units (pixels). If [code]delta[/code] is positive, makes the polygon grow outward. If [code]delta[/code] is negative, shrinks the polygon inward. Returns an array of polygons because inflating/deflating may result in multiple discrete polygons. Returns an empty array if [code]delta[/code] is negative and the absolute value of it approximately exceeds the minimum bounding rectangle dimensions of the polygon. + Each polygon's vertices will be rounded as determined by [code]join_type[/code], see [enum Geometry.PolyJoinType]. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> + <method name="offset_polyline_2d"> + <return type="Array"> + </return> + <argument index="0" name="polyline" type="PoolVector2Array"> + </argument> + <argument index="1" name="delta" type="float"> + </argument> + <argument index="2" name="join_type" type="int" enum="Geometry.PolyJoinType" default="0"> + </argument> + <argument index="3" name="end_type" type="int" enum="Geometry.PolyEndType" default="3"> + </argument> + <description> + Inflates or deflates [code]polyline[/code] by [code]delta[/code] units (pixels), producing polygons. If [code]delta[/code] is positive, makes the polyline grow outward. Returns an array of polygons because inflating/deflating may result in multiple discrete polygons. If [code]delta[/code] is negative, returns an empty array. + Each polygon's vertices will be rounded as determined by [code]join_type[/code], see [enum Geometry.PolyJoinType]. + Each polygon's endpoints will be rounded as determined by [code]end_type[/code], see [enum Geometry.PolyEndType]. + The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distiguished by calling [method is_polygon_clockwise]. + </description> + </method> <method name="point_is_inside_triangle" qualifiers="const"> <return type="bool"> </return> @@ -304,6 +416,27 @@ Tests if the segment ([code]from[/code], [code]to[/code]) intersects the triangle [code]a[/code], [code]b[/code], [code]c[/code]. If yes, returns the point of intersection as [Vector3]. If no intersection takes place, an empty [Variant] is returned. </description> </method> + <method name="transform_points_2d"> + <return type="PoolVector2Array"> + </return> + <argument index="0" name="points" type="PoolVector2Array"> + </argument> + <argument index="1" name="transform" type="Transform2D"> + </argument> + <description> + Transforms an array of points by [code]transform[/code] and returns the result. + Can be useful in conjuction with performing polygon boolean operations in CSG manner, see [method merge_polygons_2d], [method clip_polygons_2d], [method intersect_polygons_2d], [method exclude_polygons_2d]. + </description> + </method> + <method name="triangulate_delaunay_2d"> + <return type="PoolIntArray"> + </return> + <argument index="0" name="points" type="PoolVector2Array"> + </argument> + <description> + Triangulates the area specified by discrete set of [code]points[/code] such that no point is inside the circumcircle of any resulting triangle. Returns a [PoolIntArray] where each triangle consists of three consecutive point indices into [code]points[/code] (i.e. the returned array will have [code]n * 3[/code] elements, with [code]n[/code] being the number of found triangles). If the triangulation did not succeed, an empty [PoolIntArray] is returned. + </description> + </method> <method name="triangulate_polygon"> <return type="PoolIntArray"> </return> @@ -315,5 +448,41 @@ </method> </methods> <constants> + <constant name="OPERATION_UNION" value="0" enum="PolyBooleanOperation"> + Create regions where either subject or clip polygons (or both) are filled. + </constant> + <constant name="OPERATION_DIFFERENCE" value="1" enum="PolyBooleanOperation"> + Create regions where subject polygons are filled except where clip polygons are filled. + </constant> + <constant name="OPERATION_INTERSECTION" value="2" enum="PolyBooleanOperation"> + Create regions where both subject and clip polygons are filled. + </constant> + <constant name="OPERATION_XOR" value="3" enum="PolyBooleanOperation"> + Create regions where either subject or clip polygons are filled but not where both are filled. + </constant> + <constant name="JOIN_SQUARE" value="0" enum="PolyJoinType"> + Squaring is applied uniformally at all convex edge joins at [code]1 * delta[/code]. + </constant> + <constant name="JOIN_ROUND" value="1" enum="PolyJoinType"> + While flattened paths can never perfectly trace an arc, they are approximated by a series of arc chords. + </constant> + <constant name="JOIN_MITER" value="2" enum="PolyJoinType"> + There's a necessary limit to mitered joins since offsetting edges that join at very acute angles will produce excessively long and narrow 'spikes'. For any given edge join, when miter offsetting would exceed that maximum distance, 'square' joining is applied. + </constant> + <constant name="END_POLYGON" value="0" enum="PolyEndType"> + Endpoints are joined using the [enum PolyJoinType] value and the path filled as a polygon. + </constant> + <constant name="END_JOINED" value="1" enum="PolyEndType"> + Endpoints are joined using the [enum PolyJoinType] value and the path filled as a polyline. + </constant> + <constant name="END_BUTT" value="2" enum="PolyEndType"> + Endpoints are squared off with no extension. + </constant> + <constant name="END_SQUARE" value="3" enum="PolyEndType"> + Endpoints are squared off and extended by [code]delta[/code] units. + </constant> + <constant name="END_ROUND" value="4" enum="PolyEndType"> + Endpoints are rounded off and extended by [code]delta[/code] units. + </constant> </constants> </class> diff --git a/doc/classes/GraphEdit.xml b/doc/classes/GraphEdit.xml index 145cd243bc..db186eab35 100644 --- a/doc/classes/GraphEdit.xml +++ b/doc/classes/GraphEdit.xml @@ -80,7 +80,7 @@ <return type="Array"> </return> <description> - Return an Array containing the list of connections. A connection consists in a structure of the form {from_port: 0, from: "GraphNode name 0", to_port: 1, to: "GraphNode name 1" } + Returns an Array containing the list of connections. A connection consists in a structure of the form {from_port: 0, from: "GraphNode name 0", to_port: 1, to: "GraphNode name 1" } </description> </method> <method name="get_zoom_hbox"> @@ -101,7 +101,7 @@ <argument index="3" name="to_port" type="int"> </argument> <description> - Return [code]true[/code] if the 'from_port' slot of 'from' GraphNode is connected to the 'to_port' slot of 'to' GraphNode. + Returns [code]true[/code] if the 'from_port' slot of 'from' GraphNode is connected to the 'to_port' slot of 'to' GraphNode. </description> </method> <method name="is_valid_connection_type" qualifiers="const"> diff --git a/doc/classes/GraphNode.xml b/doc/classes/GraphNode.xml index 4d6f3180d0..a19676798b 100644 --- a/doc/classes/GraphNode.xml +++ b/doc/classes/GraphNode.xml @@ -31,14 +31,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the color of the input connection 'idx'. + Returns the color of the input connection 'idx'. </description> </method> <method name="get_connection_input_count"> <return type="int"> </return> <description> - Return the number of enabled input slots (connections) to the GraphNode. + Returns the number of enabled input slots (connections) to the GraphNode. </description> </method> <method name="get_connection_input_position"> @@ -47,7 +47,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the position of the input connection 'idx'. + Returns the position of the input connection 'idx'. </description> </method> <method name="get_connection_input_type"> @@ -56,7 +56,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the type of the input connection 'idx'. + Returns the type of the input connection 'idx'. </description> </method> <method name="get_connection_output_color"> @@ -65,14 +65,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the color of the output connection 'idx'. + Returns the color of the output connection 'idx'. </description> </method> <method name="get_connection_output_count"> <return type="int"> </return> <description> - Return the number of enabled output slots (connections) of the GraphNode. + Returns the number of enabled output slots (connections) of the GraphNode. </description> </method> <method name="get_connection_output_position"> @@ -81,7 +81,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the position of the output connection 'idx'. + Returns the position of the output connection 'idx'. </description> </method> <method name="get_connection_output_type"> @@ -90,7 +90,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the type of the output connection 'idx'. + Returns the type of the output connection 'idx'. </description> </method> <method name="get_slot_color_left" qualifiers="const"> @@ -99,7 +99,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the color set to 'idx' left (input) slot. + Returns the color set to 'idx' left (input) slot. </description> </method> <method name="get_slot_color_right" qualifiers="const"> @@ -108,7 +108,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the color set to 'idx' right (output) slot. + Returns the color set to 'idx' right (output) slot. </description> </method> <method name="get_slot_type_left" qualifiers="const"> @@ -117,7 +117,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the (integer) type of left (input) 'idx' slot. + Returns the (integer) type of left (input) 'idx' slot. </description> </method> <method name="get_slot_type_right" qualifiers="const"> @@ -126,7 +126,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the (integer) type of right (output) 'idx' slot. + Returns the (integer) type of right (output) 'idx' slot. </description> </method> <method name="is_slot_enabled_left" qualifiers="const"> @@ -135,7 +135,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return [code]true[/code] if left (input) slot 'idx' is enabled, [code]false[/code] otherwise. + Returns [code]true[/code] if left (input) slot 'idx' is enabled, [code]false[/code] otherwise. </description> </method> <method name="is_slot_enabled_right" qualifiers="const"> @@ -144,7 +144,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return [code]true[/code] if right (output) slot 'idx' is enabled, [code]false[/code] otherwise. + Returns [code]true[/code] if right (output) slot 'idx' is enabled, [code]false[/code] otherwise. </description> </method> <method name="set_slot"> diff --git a/doc/classes/ImageTexture.xml b/doc/classes/ImageTexture.xml index 15ecd4ee6d..e5a8fee767 100644 --- a/doc/classes/ImageTexture.xml +++ b/doc/classes/ImageTexture.xml @@ -40,7 +40,7 @@ <return type="int" enum="Image.Format"> </return> <description> - Return the format of the [ImageTexture], one of [enum Image.Format]. + Returns the format of the [ImageTexture], one of [enum Image.Format]. </description> </method> <method name="load"> diff --git a/doc/classes/Input.xml b/doc/classes/Input.xml index 319f84b8d2..9c41e4bf1d 100644 --- a/doc/classes/Input.xml +++ b/doc/classes/Input.xml @@ -194,7 +194,7 @@ <return type="int" enum="Input.MouseMode"> </return> <description> - Return the mouse mode. See the constants for more information. + Returns the mouse mode. See the constants for more information. </description> </method> <method name="is_action_just_pressed" qualifiers="const"> diff --git a/doc/classes/ItemList.xml b/doc/classes/ItemList.xml index 663eeda77a..ba3a7fe6d8 100644 --- a/doc/classes/ItemList.xml +++ b/doc/classes/ItemList.xml @@ -64,7 +64,7 @@ <return type="int"> </return> <description> - Return count of items currently in the item list. + Returns count of items currently in the item list. </description> </method> <method name="get_item_custom_bg_color" qualifiers="const"> @@ -122,7 +122,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the text for specified item index. + Returns the text for specified item index. </description> </method> <method name="get_item_tooltip" qualifiers="const"> @@ -131,7 +131,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return tooltip hint for specified item index. + Returns tooltip hint for specified item index. </description> </method> <method name="get_selected_items"> diff --git a/doc/classes/Marshalls.xml b/doc/classes/Marshalls.xml index 0d07d8b649..c7118a4d9f 100644 --- a/doc/classes/Marshalls.xml +++ b/doc/classes/Marshalls.xml @@ -15,7 +15,7 @@ <argument index="0" name="base64_str" type="String"> </argument> <description> - Return [PoolByteArray] of a given base64 encoded String. + Returns [PoolByteArray] of a given base64 encoded String. </description> </method> <method name="base64_to_utf8"> @@ -24,7 +24,7 @@ <argument index="0" name="base64_str" type="String"> </argument> <description> - Return utf8 String of a given base64 encoded String. + Returns utf8 String of a given base64 encoded String. </description> </method> <method name="base64_to_variant"> @@ -35,7 +35,7 @@ <argument index="1" name="allow_objects" type="bool" default="false"> </argument> <description> - Return [Variant] of a given base64 encoded String. When [code]allow_objects[/code] is [code]true[/code] decoding objects is allowed. + Returns [Variant] of a given base64 encoded String. When [code]allow_objects[/code] is [code]true[/code] decoding objects is allowed. [b]WARNING:[/b] Deserialized object can contain code which gets executed. Do not use this option if the serialized object comes from untrusted sources to avoid potential security threats (remote code execution). </description> </method> @@ -45,7 +45,7 @@ <argument index="0" name="array" type="PoolByteArray"> </argument> <description> - Return base64 encoded String of a given [PoolByteArray]. + Returns base64 encoded String of a given [PoolByteArray]. </description> </method> <method name="utf8_to_base64"> @@ -54,7 +54,7 @@ <argument index="0" name="utf8_str" type="String"> </argument> <description> - Return base64 encoded String of a given utf8 String. + Returns base64 encoded String of a given utf8 String. </description> </method> <method name="variant_to_base64"> @@ -65,7 +65,7 @@ <argument index="1" name="full_objects" type="bool" default="false"> </argument> <description> - Return base64 encoded String of a given [Variant]. When [code]full_objects[/code] is [code]true[/code] encoding objects is allowed (and can potentially include code). + Returns base64 encoded String of a given [Variant]. When [code]full_objects[/code] is [code]true[/code] encoding objects is allowed (and can potentially include code). </description> </method> </methods> diff --git a/doc/classes/MenuButton.xml b/doc/classes/MenuButton.xml index dadc31b794..1043aa1087 100644 --- a/doc/classes/MenuButton.xml +++ b/doc/classes/MenuButton.xml @@ -13,7 +13,7 @@ <return type="PopupMenu"> </return> <description> - Return the [PopupMenu] contained in this button. + Returns the [PopupMenu] contained in this button. </description> </method> <method name="set_disable_shortcuts"> diff --git a/doc/classes/Mesh.xml b/doc/classes/Mesh.xml index ae035341f6..b8bc5cbd11 100644 --- a/doc/classes/Mesh.xml +++ b/doc/classes/Mesh.xml @@ -50,7 +50,7 @@ <return type="int"> </return> <description> - Return the amount of surfaces that the [Mesh] holds. + Returns the amount of surfaces that the [Mesh] holds. </description> </method> <method name="surface_get_arrays" qualifiers="const"> @@ -77,7 +77,7 @@ <argument index="0" name="surf_idx" type="int"> </argument> <description> - Return a [Material] in a given surface. Surface is rendered using this material. + Returns a [Material] in a given surface. Surface is rendered using this material. </description> </method> </methods> diff --git a/doc/classes/MeshLibrary.xml b/doc/classes/MeshLibrary.xml index de4f6cdf72..ad5824640d 100644 --- a/doc/classes/MeshLibrary.xml +++ b/doc/classes/MeshLibrary.xml @@ -37,7 +37,7 @@ <return type="PoolIntArray"> </return> <description> - Return the list of items. + Returns the list of items. </description> </method> <method name="get_item_mesh" qualifiers="const"> @@ -46,7 +46,7 @@ <argument index="0" name="id" type="int"> </argument> <description> - Return the mesh of the item. + Returns the mesh of the item. </description> </method> <method name="get_item_name" qualifiers="const"> @@ -55,7 +55,7 @@ <argument index="0" name="id" type="int"> </argument> <description> - Return the name of the item. + Returns the name of the item. </description> </method> <method name="get_item_navmesh" qualifiers="const"> diff --git a/doc/classes/MultiMesh.xml b/doc/classes/MultiMesh.xml index 1532fac206..0784fc3a42 100644 --- a/doc/classes/MultiMesh.xml +++ b/doc/classes/MultiMesh.xml @@ -17,7 +17,7 @@ <return type="AABB"> </return> <description> - Return the visibility AABB. + Returns the visibility AABB. </description> </method> <method name="get_instance_color" qualifiers="const"> @@ -35,7 +35,7 @@ <argument index="0" name="instance" type="int"> </argument> <description> - Return the custom data that has been set for a specific instance. + Returns the custom data that has been set for a specific instance. </description> </method> <method name="get_instance_transform" qualifiers="const"> @@ -44,7 +44,7 @@ <argument index="0" name="instance" type="int"> </argument> <description> - Return the [Transform] of a specific instance. + Returns the [Transform] of a specific instance. </description> </method> <method name="get_instance_transform_2d" qualifiers="const"> @@ -53,7 +53,7 @@ <argument index="0" name="instance" type="int"> </argument> <description> - Return the [Transform2D] of a specific instance. + Returns the [Transform2D] of a specific instance. </description> </method> <method name="set_as_bulk_array"> diff --git a/doc/classes/NodePath.xml b/doc/classes/NodePath.xml index 73739ba79a..554858d895 100644 --- a/doc/classes/NodePath.xml +++ b/doc/classes/NodePath.xml @@ -68,14 +68,14 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if the node path is absolute (not relative). + Returns [code]true[/code] if the node path is absolute (not relative). </description> </method> <method name="is_empty"> <return type="bool"> </return> <description> - Return [code]true[/code] if the node path is empty. + Returns [code]true[/code] if the node path is empty. </description> </method> </methods> diff --git a/doc/classes/OptionButton.xml b/doc/classes/OptionButton.xml index 06b4cb165e..1f714656de 100644 --- a/doc/classes/OptionButton.xml +++ b/doc/classes/OptionButton.xml @@ -51,7 +51,7 @@ <return type="int"> </return> <description> - Return the amount of items in the OptionButton. + Returns the amount of items in the OptionButton. </description> </method> <method name="get_item_icon" qualifiers="const"> @@ -60,7 +60,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the icon of the item at index "idx". + Returns the icon of the item at index "idx". </description> </method> <method name="get_item_id" qualifiers="const"> @@ -69,7 +69,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the ID of the item at index [code]idx[/code]. + Returns the ID of the item at index [code]idx[/code]. </description> </method> <method name="get_item_index" qualifiers="const"> @@ -78,7 +78,7 @@ <argument index="0" name="id" type="int"> </argument> <description> - Return the index of the item with the given [code]id[/code]. + Returns the index of the item with the given [code]id[/code]. </description> </method> <method name="get_item_metadata" qualifiers="const"> @@ -95,14 +95,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the text of the item at index "idx". + Returns the text of the item at index "idx". </description> </method> <method name="get_popup" qualifiers="const"> <return type="PopupMenu"> </return> <description> - Return the [PopupMenu] contained in this button. + Returns the [PopupMenu] contained in this button. </description> </method> <method name="get_selected_id" qualifiers="const"> diff --git a/doc/classes/PacketPeer.xml b/doc/classes/PacketPeer.xml index 5a54c7ba1c..4109d9d462 100644 --- a/doc/classes/PacketPeer.xml +++ b/doc/classes/PacketPeer.xml @@ -13,7 +13,7 @@ <return type="int"> </return> <description> - Return the number of packets currently available in the ring-buffer. + Returns the number of packets currently available in the ring-buffer. </description> </method> <method name="get_packet"> @@ -27,7 +27,7 @@ <return type="int" enum="Error"> </return> <description> - Return the error state of the last packet received (via [method get_packet] and [method get_var]). + Returns the error state of the last packet received (via [method get_packet] and [method get_var]). </description> </method> <method name="get_var"> diff --git a/doc/classes/PacketPeerUDP.xml b/doc/classes/PacketPeerUDP.xml index 5892eb17b7..9843c16108 100644 --- a/doc/classes/PacketPeerUDP.xml +++ b/doc/classes/PacketPeerUDP.xml @@ -20,21 +20,21 @@ <return type="String"> </return> <description> - Return the IP of the remote peer that sent the last packet(that was received with [method PacketPeer.get_packet] or [method PacketPeer.get_var]). + Returns the IP of the remote peer that sent the last packet(that was received with [method PacketPeer.get_packet] or [method PacketPeer.get_var]). </description> </method> <method name="get_packet_port" qualifiers="const"> <return type="int"> </return> <description> - Return the port of the remote peer that sent the last packet(that was received with [method PacketPeer.get_packet] or [method PacketPeer.get_var]). + Returns the port of the remote peer that sent the last packet(that was received with [method PacketPeer.get_packet] or [method PacketPeer.get_var]). </description> </method> <method name="is_listening" qualifiers="const"> <return type="bool"> </return> <description> - Return whether this [PacketPeerUDP] is listening. + Returns whether this [PacketPeerUDP] is listening. </description> </method> <method name="listen"> diff --git a/doc/classes/PoolByteArray.xml b/doc/classes/PoolByteArray.xml index f46cb243d7..cb99b660ae 100644 --- a/doc/classes/PoolByteArray.xml +++ b/doc/classes/PoolByteArray.xml @@ -116,14 +116,14 @@ <return type="String"> </return> <description> - Return SHA256 string of the PoolByteArray. + Returns SHA256 string of the PoolByteArray. </description> </method> <method name="size"> <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> <method name="subarray"> diff --git a/doc/classes/PoolColorArray.xml b/doc/classes/PoolColorArray.xml index d16029a8d7..efc3582ba4 100644 --- a/doc/classes/PoolColorArray.xml +++ b/doc/classes/PoolColorArray.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PoolIntArray.xml b/doc/classes/PoolIntArray.xml index 83d73c8a24..fca1083c25 100644 --- a/doc/classes/PoolIntArray.xml +++ b/doc/classes/PoolIntArray.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the array size. + Returns the array size. </description> </method> </methods> diff --git a/doc/classes/PoolRealArray.xml b/doc/classes/PoolRealArray.xml index e1da99519c..c5f6062175 100644 --- a/doc/classes/PoolRealArray.xml +++ b/doc/classes/PoolRealArray.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PoolStringArray.xml b/doc/classes/PoolStringArray.xml index 6ef4222996..01dca93be3 100644 --- a/doc/classes/PoolStringArray.xml +++ b/doc/classes/PoolStringArray.xml @@ -91,7 +91,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PoolVector2Array.xml b/doc/classes/PoolVector2Array.xml index 50ded06b90..45f619dc5d 100644 --- a/doc/classes/PoolVector2Array.xml +++ b/doc/classes/PoolVector2Array.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PoolVector3Array.xml b/doc/classes/PoolVector3Array.xml index 69b4e54692..0a682e2baf 100644 --- a/doc/classes/PoolVector3Array.xml +++ b/doc/classes/PoolVector3Array.xml @@ -82,7 +82,7 @@ <return type="int"> </return> <description> - Return the size of the array. + Returns the size of the array. </description> </method> </methods> diff --git a/doc/classes/PopupMenu.xml b/doc/classes/PopupMenu.xml index a91f765d41..d4f4834a66 100644 --- a/doc/classes/PopupMenu.xml +++ b/doc/classes/PopupMenu.xml @@ -178,14 +178,14 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the accelerator of the item at index "idx". Accelerators are special combinations of keys that activate the item, no matter which control is focused. + Returns the accelerator of the item at index "idx". Accelerators are special combinations of keys that activate the item, no matter which control is focused. </description> </method> <method name="get_item_count" qualifiers="const"> <return type="int"> </return> <description> - Return the amount of items. + Returns the amount of items. </description> </method> <method name="get_item_icon" qualifiers="const"> @@ -194,7 +194,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the icon of the item at index "idx". + Returns the icon of the item at index "idx". </description> </method> <method name="get_item_id" qualifiers="const"> @@ -203,7 +203,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the id of the item at index "idx". + Returns the id of the item at index "idx". </description> </method> <method name="get_item_index" qualifiers="const"> @@ -221,7 +221,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the metadata of an item, which might be of any type. You can set it with [method set_item_metadata], which provides a simple way of assigning context data to items. + Returns the metadata of an item, which might be of any type. You can set it with [method set_item_metadata], which provides a simple way of assigning context data to items. </description> </method> <method name="get_item_shortcut" qualifiers="const"> @@ -238,7 +238,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the submenu name of the item at index "idx". + Returns the submenu name of the item at index "idx". </description> </method> <method name="get_item_text" qualifiers="const"> @@ -247,7 +247,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return the text of the item at index "idx". + Returns the text of the item at index "idx". </description> </method> <method name="get_item_tooltip" qualifiers="const"> @@ -270,7 +270,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item at index "idx" is checkable in some way, i.e., whether has a checkbox or radio button. Note that checkable items just display a checkmark or radio button, but don't have any built-in checking behavior and must be checked/unchecked manually. + Returns whether the item at index "idx" is checkable in some way, i.e., whether has a checkbox or radio button. Note that checkable items just display a checkmark or radio button, but don't have any built-in checking behavior and must be checked/unchecked manually. </description> </method> <method name="is_item_checked" qualifiers="const"> @@ -279,7 +279,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item at index "idx" is checked. + Returns whether the item at index "idx" is checked. </description> </method> <method name="is_item_disabled" qualifiers="const"> @@ -288,7 +288,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item at index "idx" is disabled. When it is disabled it can't be selected, or its action invoked. + Returns whether the item at index "idx" is disabled. When it is disabled it can't be selected, or its action invoked. </description> </method> <method name="is_item_radio_checkable" qualifiers="const"> @@ -297,7 +297,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item at index "idx" has radio-button-style checkability. Remember this is just cosmetic and you have to add the logic for checking/unchecking items in radio groups. + Returns whether the item at index "idx" has radio-button-style checkability. Remember this is just cosmetic and you have to add the logic for checking/unchecking items in radio groups. </description> </method> <method name="is_item_separator" qualifiers="const"> @@ -306,7 +306,7 @@ <argument index="0" name="idx" type="int"> </argument> <description> - Return whether the item is a separator. If it is, it would be displayed as a line. + Returns whether the item is a separator. If it is, it would be displayed as a line. </description> </method> <method name="is_item_shortcut_disabled" qualifiers="const"> diff --git a/doc/classes/Quat.xml b/doc/classes/Quat.xml index f7134e580d..3ef65e1edb 100644 --- a/doc/classes/Quat.xml +++ b/doc/classes/Quat.xml @@ -84,7 +84,7 @@ <return type="Vector3"> </return> <description> - Return Euler angles (in the YXZ convention: first Z, then X, and Y last) corresponding to the rotation represented by the unit quaternion. Returned vector contains the rotation angles in the format (X-angle, Y-angle, Z-angle). + Returns Euler angles (in the YXZ convention: first Z, then X, and Y last) corresponding to the rotation represented by the unit quaternion. Returned vector contains the rotation angles in the format (X-angle, Y-angle, Z-angle). </description> </method> <method name="inverse"> diff --git a/doc/classes/RayCast.xml b/doc/classes/RayCast.xml index 1d2999a1ed..1368143b67 100644 --- a/doc/classes/RayCast.xml +++ b/doc/classes/RayCast.xml @@ -50,7 +50,7 @@ <return type="Object"> </return> <description> - Return the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). + Returns the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> <method name="get_collider_shape" qualifiers="const"> @@ -87,7 +87,7 @@ <return type="bool"> </return> <description> - Return whether any object is intersecting with the ray's vector (considering the vector length). + Returns whether any object is intersecting with the ray's vector (considering the vector length). </description> </method> <method name="remove_exception"> diff --git a/doc/classes/RayCast2D.xml b/doc/classes/RayCast2D.xml index 7a16e9e5e0..90e0178ddb 100644 --- a/doc/classes/RayCast2D.xml +++ b/doc/classes/RayCast2D.xml @@ -49,7 +49,7 @@ <return type="Object"> </return> <description> - Return the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). + Returns the first object that the ray intersects, or [code]null[/code] if no object is intersecting the ray (i.e. [method is_colliding] returns [code]false[/code]). </description> </method> <method name="get_collider_shape" qualifiers="const"> @@ -65,7 +65,7 @@ <argument index="0" name="bit" type="int"> </argument> <description> - Return an individual bit on the collision mask. + Returns an individual bit on the collision mask. </description> </method> <method name="get_collision_normal" qualifiers="const"> @@ -86,7 +86,7 @@ <return type="bool"> </return> <description> - Return whether any object is intersecting with the ray's vector (considering the vector length). + Returns whether any object is intersecting with the ray's vector (considering the vector length). </description> </method> <method name="remove_exception"> diff --git a/doc/classes/ResourceInteractiveLoader.xml b/doc/classes/ResourceInteractiveLoader.xml index 6b37cb25fb..bb9826999c 100644 --- a/doc/classes/ResourceInteractiveLoader.xml +++ b/doc/classes/ResourceInteractiveLoader.xml @@ -13,21 +13,21 @@ <return type="Resource"> </return> <description> - Return the loaded resource (only if loaded). Otherwise, returns null. + Returns the loaded resource (only if loaded). Otherwise, returns null. </description> </method> <method name="get_stage" qualifiers="const"> <return type="int"> </return> <description> - Return the load stage. The total amount of stages can be queried with [method get_stage_count] + Returns the load stage. The total amount of stages can be queried with [method get_stage_count] </description> </method> <method name="get_stage_count" qualifiers="const"> <return type="int"> </return> <description> - Return the total amount of stages (calls to [method poll]) needed to completely load this resource. + Returns the total amount of stages (calls to [method poll]) needed to completely load this resource. </description> </method> <method name="poll"> diff --git a/doc/classes/ResourceLoader.xml b/doc/classes/ResourceLoader.xml index 70deb4509f..76b7c39191 100644 --- a/doc/classes/ResourceLoader.xml +++ b/doc/classes/ResourceLoader.xml @@ -33,7 +33,7 @@ <argument index="0" name="type" type="String"> </argument> <description> - Return the list of recognized extensions for a resource type. + Returns the list of recognized extensions for a resource type. </description> </method> <method name="has"> diff --git a/doc/classes/RigidBody.xml b/doc/classes/RigidBody.xml index 25b896ec3a..9ea6bb0fe1 100644 --- a/doc/classes/RigidBody.xml +++ b/doc/classes/RigidBody.xml @@ -86,7 +86,7 @@ <return type="Array"> </return> <description> - Return a list of the bodies colliding with this one. By default, number of max contacts reported is at 0, see the [member contacts_reported] property to increase it. Note that the result of this test is not immediate after moving objects. For performance, list of collisions is updated once per frame and before the physics step. Consider using signals instead. + Returns a list of the bodies colliding with this one. By default, number of max contacts reported is at 0, see the [member contacts_reported] property to increase it. Note that the result of this test is not immediate after moving objects. For performance, list of collisions is updated once per frame and before the physics step. Consider using signals instead. </description> </method> <method name="set_axis_velocity"> diff --git a/doc/classes/Shape2D.xml b/doc/classes/Shape2D.xml index dec3c2b43c..c887e23de0 100644 --- a/doc/classes/Shape2D.xml +++ b/doc/classes/Shape2D.xml @@ -52,7 +52,7 @@ <argument index="4" name="shape_motion" type="Vector2"> </argument> <description> - Return whether this shape would collide with another, if a given movement was applied. + Returns whether this shape would collide with another, if a given movement was applied. This method needs the transformation matrix for this shape ([code]local_xform[/code]), the movement to test on this shape ([code]local_motion[/code]), the shape to check collisions with ([code]with_shape[/code]), the transformation matrix of that shape ([code]shape_xform[/code]), and the movement to test onto the other object ([code]shape_motion[/code]). </description> </method> diff --git a/doc/classes/Skeleton.xml b/doc/classes/Skeleton.xml index 8fab778a48..b693ee0a5e 100644 --- a/doc/classes/Skeleton.xml +++ b/doc/classes/Skeleton.xml @@ -44,14 +44,14 @@ <argument index="0" name="name" type="String"> </argument> <description> - Return the bone index that matches "name" as its name. + Returns the bone index that matches "name" as its name. </description> </method> <method name="get_bone_count" qualifiers="const"> <return type="int"> </return> <description> - Return the amount of bones in the skeleton. + Returns the amount of bones in the skeleton. </description> </method> <method name="get_bone_custom_pose" qualifiers="const"> @@ -60,7 +60,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the custom pose of the specified bone. Custom pose is applied on top of the rest pose. + Returns the custom pose of the specified bone. Custom pose is applied on top of the rest pose. </description> </method> <method name="get_bone_global_pose" qualifiers="const"> @@ -69,7 +69,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the overall transform of the specified bone, with respect to the skeleton. Being relative to the skeleton frame, this is not the actual "global" transform of the bone. + Returns the overall transform of the specified bone, with respect to the skeleton. Being relative to the skeleton frame, this is not the actual "global" transform of the bone. </description> </method> <method name="get_bone_name" qualifiers="const"> @@ -78,7 +78,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the name of the bone at index "index". + Returns the name of the bone at index "index". </description> </method> <method name="get_bone_parent" qualifiers="const"> @@ -87,7 +87,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the bone index which is the parent of the bone at "bone_idx". If -1, then bone has no parent. Note that the parent bone returned will always be less than "bone_idx". + Returns the bone index which is the parent of the bone at "bone_idx". If -1, then bone has no parent. Note that the parent bone returned will always be less than "bone_idx". </description> </method> <method name="get_bone_pose" qualifiers="const"> @@ -96,7 +96,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the pose transform of the specified bone. Pose is applied on top of the custom pose, which is applied on top the rest pose. + Returns the pose transform of the specified bone. Pose is applied on top of the custom pose, which is applied on top the rest pose. </description> </method> <method name="get_bone_rest" qualifiers="const"> @@ -105,7 +105,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the rest transform for a bone "bone_idx". + Returns the rest transform for a bone "bone_idx". </description> </method> <method name="get_bone_transform" qualifiers="const"> @@ -114,7 +114,7 @@ <argument index="0" name="bone_idx" type="int"> </argument> <description> - Return the combination of custom pose and pose. The returned transform is in skeleton's reference frame. + Returns the combination of custom pose and pose. The returned transform is in skeleton's reference frame. </description> </method> <method name="get_bound_child_nodes_to_bone" qualifiers="const"> @@ -229,7 +229,7 @@ <argument index="1" name="pose" type="Transform"> </argument> <description> - Return the pose transform for bone "bone_idx". + Returns the pose transform for bone "bone_idx". </description> </method> <method name="set_bone_rest"> diff --git a/doc/classes/StreamPeer.xml b/doc/classes/StreamPeer.xml index af8e43944c..d278312fc3 100644 --- a/doc/classes/StreamPeer.xml +++ b/doc/classes/StreamPeer.xml @@ -41,7 +41,7 @@ <return type="int"> </return> <description> - Return the amount of bytes this [StreamPeer] has available. + Returns the amount of bytes this [StreamPeer] has available. </description> </method> <method name="get_data"> @@ -50,7 +50,7 @@ <argument index="0" name="bytes" type="int"> </argument> <description> - Return a chunk data with the received bytes. The amount of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will block until the desired amount is received. This function returns two values, an Error code and a data array. + Returns a chunk data with the received bytes. The amount of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will block until the desired amount is received. This function returns two values, an Error code and a data array. </description> </method> <method name="get_double"> @@ -73,7 +73,7 @@ <argument index="0" name="bytes" type="int"> </argument> <description> - Return a chunk data with the received bytes. The amount of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will return how many were actually received. This function returns two values, an Error code, and a data array. + Returns a chunk data with the received bytes. The amount of bytes to be received can be requested in the "bytes" argument. If not enough bytes are available, the function will return how many were actually received. This function returns two values, an Error code, and a data array. </description> </method> <method name="get_string"> diff --git a/doc/classes/StreamPeerSSL.xml b/doc/classes/StreamPeerSSL.xml index f7fd36ed58..f28e6e5544 100644 --- a/doc/classes/StreamPeerSSL.xml +++ b/doc/classes/StreamPeerSSL.xml @@ -42,7 +42,7 @@ <return type="int" enum="StreamPeerSSL.Status"> </return> <description> - Return the status of the connection, one of STATUS_* enum. + Returns the status of the connection, one of STATUS_* enum. </description> </method> <method name="poll"> diff --git a/doc/classes/StreamPeerTCP.xml b/doc/classes/StreamPeerTCP.xml index 16bf69110d..0edea42521 100644 --- a/doc/classes/StreamPeerTCP.xml +++ b/doc/classes/StreamPeerTCP.xml @@ -31,21 +31,21 @@ <return type="String"> </return> <description> - Return the IP of this peer. + Returns the IP of this peer. </description> </method> <method name="get_connected_port" qualifiers="const"> <return type="int"> </return> <description> - Return the port of this peer. + Returns the port of this peer. </description> </method> <method name="get_status"> <return type="int" enum="StreamPeerTCP.Status"> </return> <description> - Return the status of the connection, see [enum StreamPeerTCP.Status]. + Returns the status of the connection, see [enum StreamPeerTCP.Status]. </description> </method> <method name="is_connected_to_host" qualifiers="const"> diff --git a/doc/classes/StyleBox.xml b/doc/classes/StyleBox.xml index 40cb2632b6..a156f134e7 100644 --- a/doc/classes/StyleBox.xml +++ b/doc/classes/StyleBox.xml @@ -37,7 +37,7 @@ <argument index="0" name="margin" type="int" enum="Margin"> </argument> <description> - Return the content margin offset for the specified margin + Returns the content margin offset for the specified margin Positive values reduce size inwards, unlike [Control]'s margin values. </description> </method> @@ -45,14 +45,14 @@ <return type="Vector2"> </return> <description> - Return the minimum size that this stylebox can be shrunk to. + Returns the minimum size that this stylebox can be shrunk to. </description> </method> <method name="get_offset" qualifiers="const"> <return type="Vector2"> </return> <description> - Return the "offset" of a stylebox, this is a helper function, like writing [code]Vector2(style.get_margin(MARGIN_LEFT), style.get_margin(MARGIN_TOP))[/code]. + Returns the "offset" of a stylebox, this is a helper function, like writing [code]Vector2(style.get_margin(MARGIN_LEFT), style.get_margin(MARGIN_TOP))[/code]. </description> </method> <method name="test_mask" qualifiers="const"> diff --git a/doc/classes/TCP_Server.xml b/doc/classes/TCP_Server.xml index ac9b33bc34..663d3248e8 100644 --- a/doc/classes/TCP_Server.xml +++ b/doc/classes/TCP_Server.xml @@ -13,7 +13,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if a connection is available for taking. + Returns [code]true[/code] if a connection is available for taking. </description> </method> <method name="listen"> diff --git a/doc/classes/TextEdit.xml b/doc/classes/TextEdit.xml index 66c0f0277a..eb70d7a1c3 100644 --- a/doc/classes/TextEdit.xml +++ b/doc/classes/TextEdit.xml @@ -69,14 +69,14 @@ <return type="int"> </return> <description> - Return the column the editing cursor is at. + Returns the column the editing cursor is at. </description> </method> <method name="cursor_get_line" qualifiers="const"> <return type="int"> </return> <description> - Return the line the editing cursor is at. + Returns the line the editing cursor is at. </description> </method> <method name="cursor_set_column"> @@ -137,7 +137,7 @@ <return type="Array"> </return> <description> - Return an array containing the line number of each breakpoint. + Returns an array containing the line number of each breakpoint. </description> </method> <method name="get_keyword_color" qualifiers="const"> @@ -154,14 +154,14 @@ <argument index="0" name="line" type="int"> </argument> <description> - Return the text of a specific line. + Returns the text of a specific line. </description> </method> <method name="get_line_count" qualifiers="const"> <return type="int"> </return> <description> - Return the amount of total lines in the text. + Returns the amount of total lines in the text. </description> </method> <method name="get_menu" qualifiers="const"> @@ -175,35 +175,35 @@ <return type="int"> </return> <description> - Return the selection begin column. + Returns the selection begin column. </description> </method> <method name="get_selection_from_line" qualifiers="const"> <return type="int"> </return> <description> - Return the selection begin line. + Returns the selection begin line. </description> </method> <method name="get_selection_text" qualifiers="const"> <return type="String"> </return> <description> - Return the text inside the selection. + Returns the text inside the selection. </description> </method> <method name="get_selection_to_column" qualifiers="const"> <return type="int"> </return> <description> - Return the selection end column. + Returns the selection end column. </description> </method> <method name="get_selection_to_line" qualifiers="const"> <return type="int"> </return> <description> - Return the selection end line. + Returns the selection end line. </description> </method> <method name="get_word_under_cursor" qualifiers="const"> @@ -250,7 +250,7 @@ <return type="bool"> </return> <description> - Return [code]true[/code] if the selection is active. + Returns [code]true[/code] if the selection is active. </description> </method> <method name="menu_option"> diff --git a/doc/classes/Texture.xml b/doc/classes/Texture.xml index 39f3ee447c..4418a6ce8f 100644 --- a/doc/classes/Texture.xml +++ b/doc/classes/Texture.xml @@ -74,21 +74,21 @@ <return type="int"> </return> <description> - Return the texture height. + Returns the texture height. </description> </method> <method name="get_size" qualifiers="const"> <return type="Vector2"> </return> <description> - Return the texture size. + Returns the texture size. </description> </method> <method name="get_width" qualifiers="const"> <return type="int"> </return> <description> - Return the texture width. + Returns the texture width. </description> </method> <method name="has_alpha" qualifiers="const"> diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index b48dc9de35..53e66cee74 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -253,6 +253,9 @@ <member name="physics_object_picking" type="bool" setter="set_physics_object_picking" getter="get_physics_object_picking"> If [code]true[/code], the objects rendered by viewport become subjects of mouse picking process. Default value: [code]false[/code]. </member> + <member name="render_direct_to_screen" type="bool" setter="set_use_render_direct_to_screen" getter="is_using_render_direct_to_screen"> + If [code]true[/code], renders the Viewport directly to the screen instead of to the root viewport. Only available in GLES2. This is a low-level optimization and should not be used in most cases. If used, reading from the Viewport or from [code]SCREEN_TEXTURE[/code] becomes unavailable. For more information see [method VisualServer.viewport_set_render_direct_to_screen]. Default value: [code]false[/code]. + </member> <member name="render_target_clear_mode" type="int" setter="set_clear_mode" getter="get_clear_mode" enum="Viewport.ClearMode"> The clear mode when viewport used as a render target. Default value: [code]CLEAR_MODE_ALWAYS[/code]. </member> diff --git a/doc/classes/VisualServer.xml b/doc/classes/VisualServer.xml index dae120f09b..3563120f0f 100644 --- a/doc/classes/VisualServer.xml +++ b/doc/classes/VisualServer.xml @@ -3590,7 +3590,14 @@ <argument index="2" name="screen" type="int" default="0"> </argument> <description> - Attaches a viewport to a screen. + Copies viewport to a region of the screen specified by [code]rect[/code]. If Viewport.[member Viewport.render_direct_to_screen] is [code]true[/code], then viewport does not use a framebuffer and the contents of the viewport are rendered directly to screen. However, note that the root viewport is drawn last, therefore it will draw over the screen. Accordingly, you must set the root viewport to an area that does not cover the area that you have attached this viewport to. + For example, you can set the root viewport to not render at all with the following code: + [codeblock] + func _ready(): + get_viewport().set_attach_to_screen_rect(Rect2()) + $Viewport.set_attach_to_screen_rect(Rect2(0, 0, 600, 600)) + [/codeblock] + Using this can result in significant optimization, especially on lower-end devices. However, it comes at the cost of having to manage your viewports manually. For a further optimization see, [method set_render_direct_to_screen]. </description> </method> <method name="viewport_create"> @@ -3789,6 +3796,17 @@ Sets the viewport's parent to another viewport. </description> </method> + <method name="viewport_set_render_direct_to_screen"> + <return type="void"> + </return> + <argument index="0" name="viewport" type="RID"> + </argument> + <argument index="1" name="enabled" type="bool"> + </argument> + <description> + If [code]true[/code], render the contents of the viewport directly to screen. This allows a low-level optimization where you can skip drawing a viewport to the root viewport. While this optimization can result in a significant increase in speed (especially on older devices), it comes at a cost of usability. When this is enabled, you cannot read from the viewport or from the [code]SCREEN_TEXTURE[/code]. You also lose the benefit of certain window settings, such as the various stretch modes. Another consequence to be aware of is that in 2D the rendering happens in window coordinates, so if you have a viewport that is double the size of the window, and you set this, then only the portion that fits within the window will be drawn, no automatic scaling is possible, even if your game scene is significantly larger than the window size. + </description> + </method> <method name="viewport_set_scenario"> <return type="void"> </return> diff --git a/doc/classes/WindowDialog.xml b/doc/classes/WindowDialog.xml index 16b7bd84ad..c5d66af984 100644 --- a/doc/classes/WindowDialog.xml +++ b/doc/classes/WindowDialog.xml @@ -13,7 +13,7 @@ <return type="TextureButton"> </return> <description> - Return the close [TextureButton]. + Returns the close [TextureButton]. </description> </method> </methods> |