diff options
Diffstat (limited to 'doc/classes/ProjectSettings.xml')
| -rw-r--r-- | doc/classes/ProjectSettings.xml | 102 |
1 files changed, 55 insertions, 47 deletions
diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index fa7fad9e40..ffafff0ff4 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -1639,8 +1639,11 @@ </member> <member name="rendering/2d/snap/snap_2d_vertices_to_pixel" type="bool" setter="" getter="" default="false"> </member> - <member name="rendering/anti_aliasing/quality/msaa" type="int" setter="" getter="" default="0"> - Sets the number of MSAA samples to use (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. See also bilinear scaling 3d [member rendering/scaling_3d/mode] for supersampling, which provides higher quality but is much more expensive. + <member name="rendering/anti_aliasing/quality/msaa_2d" type="int" setter="" getter="" default="0"> + Sets the number of MSAA samples to use for 2D/Canvas rendering (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. This has no effect on shader-induced aliasing or texture aliasing. + </member> + <member name="rendering/anti_aliasing/quality/msaa_3d" type="int" setter="" getter="" default="0"> + Sets the number of MSAA samples to use for 3D rendering (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. See also bilinear scaling 3d [member rendering/scaling_3d/mode] for supersampling, which provides higher quality but is much more expensive. This has no effect on shader-induced aliasing or texture aliasing. </member> <member name="rendering/anti_aliasing/quality/screen_space_aa" type="int" setter="" getter="" default="0"> Sets the screen-space antialiasing mode for the default screen [Viewport]. Screen-space antialiasing works by selectively blurring edges in a post-process shader. It differs from MSAA which takes multiple coverage samples while rendering objects. Screen-space AA methods are typically faster than MSAA and will smooth out specular aliasing, but tend to make scenes appear blurry. The blurriness is partially counteracted by automatically using a negative mipmap LOD bias (see [member rendering/textures/default_filters/texture_mipmap_bias]). @@ -1804,6 +1807,55 @@ <member name="rendering/lightmapping/probe_capture/update_speed" type="float" setter="" getter="" default="15"> The framerate-independent update speed when representing dynamic object lighting from [LightmapProbe]s. Higher values make dynamic object lighting update faster. Higher values can prevent fast-moving objects from having "outdated" indirect lighting displayed on them, at the cost of possible flickering when an object moves from a bright area to a shaded area. </member> + <member name="rendering/lights_and_shadows/directional_shadow/16_bits" type="bool" setter="" getter="" default="true"> + Use 16 bits for shadow depth map. Enabling this results in shadows having less precision and may result in shadow acne, but can lead to performance improvements on some devices. + </member> + <member name="rendering/lights_and_shadows/directional_shadow/size" type="int" setter="" getter="" default="4096"> + The directional shadow's size in pixels. Higher values will result in sharper shadows, at the cost of performance. The value will be rounded up to the nearest power of 2. + </member> + <member name="rendering/lights_and_shadows/directional_shadow/size.mobile" type="int" setter="" getter="" default="2048"> + Lower-end override for [member rendering/lights_and_shadows/directional_shadow/size] on mobile devices, due to performance concerns or driver support. + </member> + <member name="rendering/lights_and_shadows/directional_shadow/soft_shadow_filter_quality" type="int" setter="" getter="" default="2"> + Quality setting for shadows cast by [DirectionalLight3D]s. Higher quality settings use more samples when reading from shadow maps and are thus slower. Low quality settings may result in shadows looking grainy. + [b]Note:[/b] The Soft Very Low setting will automatically multiply [i]constant[/i] shadow blur by 0.75x to reduce the amount of noise visible. This automatic blur change only affects the constant blur factor defined in [member Light3D.shadow_blur], not the variable blur performed by [DirectionalLight3D]s' [member Light3D.light_angular_distance]. + [b]Note:[/b] The Soft High and Soft Ultra settings will automatically multiply [i]constant[/i] shadow blur by 1.5× and 2× respectively to make better use of the increased sample count. This increased blur also improves stability of dynamic object shadows. + </member> + <member name="rendering/lights_and_shadows/directional_shadow/soft_shadow_filter_quality.mobile" type="int" setter="" getter="" default="0"> + Lower-end override for [member rendering/lights_and_shadows/directional_shadow/soft_shadow_filter_quality] on mobile devices, due to performance concerns or driver support. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/atlas_16_bits" type="bool" setter="" getter="" default="true"> + Use 16 bits for shadow depth map. Enabling this results in shadows having less precision and may result in shadow acne, but can lead to performance improvements on some devices. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/atlas_quadrant_0_subdiv" type="int" setter="" getter="" default="2"> + Subdivision quadrant size for shadow mapping. See shadow mapping documentation. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/atlas_quadrant_1_subdiv" type="int" setter="" getter="" default="2"> + Subdivision quadrant size for shadow mapping. See shadow mapping documentation. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/atlas_quadrant_2_subdiv" type="int" setter="" getter="" default="3"> + Subdivision quadrant size for shadow mapping. See shadow mapping documentation. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/atlas_quadrant_3_subdiv" type="int" setter="" getter="" default="4"> + Subdivision quadrant size for shadow mapping. See shadow mapping documentation. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/atlas_size" type="int" setter="" getter="" default="4096"> + Size for shadow atlas (used for OmniLights and SpotLights). See documentation. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/atlas_size.mobile" type="int" setter="" getter="" default="2048"> + Lower-end override for [member rendering/lights_and_shadows/positional_shadow/atlas_size] on mobile devices, due to performance concerns or driver support. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/soft_shadow_filter_quality" type="int" setter="" getter="" default="2"> + Quality setting for shadows cast by [OmniLight3D]s and [SpotLight3D]s. Higher quality settings use more samples when reading from shadow maps and are thus slower. Low quality settings may result in shadows looking grainy. + [b]Note:[/b] The Soft Very Low setting will automatically multiply [i]constant[/i] shadow blur by 0.75x to reduce the amount of noise visible. This automatic blur change only affects the constant blur factor defined in [member Light3D.shadow_blur], not the variable blur performed by [DirectionalLight3D]s' [member Light3D.light_angular_distance]. + [b]Note:[/b] The Soft High and Soft Ultra settings will automatically multiply shadow blur by 1.5× and 2× respectively to make better use of the increased sample count. This increased blur also improves stability of dynamic object shadows. + </member> + <member name="rendering/lights_and_shadows/positional_shadow/soft_shadow_filter_quality.mobile" type="int" setter="" getter="" default="0"> + Lower-end override for [member rendering/lights_and_shadows/positional_shadow/soft_shadow_filter_quality] on mobile devices, due to performance concerns or driver support. + </member> + <member name="rendering/lights_and_shadows/use_physical_light_units" type="bool" setter="" getter="" default="false"> + Enables the use of physically based units for light sources. Physically based units tend to be much larger than the arbitrary units used by Godot, but they can be used to match lighting within Godot to real-world lighting. Due to the large dynamic range of lighting conditions present in nature, Godot bakes exposure into the various lighting quantities before rendering. Most light sources bake exposure automatically at run time based on the active [CameraAttributes] resource, but [LightmapGI] and [VoxelGI] require a [CameraAttributes] resource to be set at bake time to reduce the dynamic range. At run time, Godot will automatically reconcile the baked exposure with the active exposure to ensure lighting remains consistent. + </member> <member name="rendering/limits/cluster_builder/max_clustered_elements" type="float" setter="" getter="" default="512"> </member> <member name="rendering/limits/forward_renderer/threaded_render_minimum_instances" type="int" setter="" getter="" default="500"> @@ -1874,7 +1926,7 @@ Sets the scaling 3D mode. Bilinear scaling renders at different resolution to either undersample or supersample the viewport. FidelityFX Super Resolution 1.0, abbreviated to FSR, is an upscaling technology that produces high quality images at fast framerates by using a spatially aware upscaling algorithm. FSR is slightly more expensive than bilinear, but it produces significantly higher image quality. FSR should be used where possible. </member> <member name="rendering/scaling_3d/scale" type="float" setter="" getter="" default="1.0"> - Scales the 3D render buffer based on the viewport size uses an image filter specified in [member rendering/scaling_3d/mode] to scale the output image to the full viewport size. Values lower than [code]1.0[/code] can be used to speed up 3D rendering at the cost of quality (undersampling). Values greater than [code]1.0[/code] are only valid for bilinear mode and can be used to improve 3D rendering quality at a high performance cost (supersampling). See also [member rendering/anti_aliasing/quality/msaa] for multi-sample antialiasing, which is significantly cheaper but only smoothens the edges of polygons. + Scales the 3D render buffer based on the viewport size uses an image filter specified in [member rendering/scaling_3d/mode] to scale the output image to the full viewport size. Values lower than [code]1.0[/code] can be used to speed up 3D rendering at the cost of quality (undersampling). Values greater than [code]1.0[/code] are only valid for bilinear mode and can be used to improve 3D rendering quality at a high performance cost (supersampling). See also [member rendering/anti_aliasing/quality/msaa_3d] for multi-sample antialiasing, which is significantly cheaper but only smooths the edges of polygons. </member> <member name="rendering/shader_compiler/shader_cache/compress" type="bool" setter="" getter="" default="true"> </member> @@ -1898,50 +1950,6 @@ <member name="rendering/shading/overrides/force_vertex_shading.mobile" type="bool" setter="" getter="" default="true"> Lower-end override for [member rendering/shading/overrides/force_vertex_shading] on mobile devices, due to performance concerns or driver support. </member> - <member name="rendering/shadows/directional_shadow/16_bits" type="bool" setter="" getter="" default="true"> - </member> - <member name="rendering/shadows/directional_shadow/size" type="int" setter="" getter="" default="4096"> - The directional shadow's size in pixels. Higher values will result in sharper shadows, at the cost of performance. The value will be rounded up to the nearest power of 2. - </member> - <member name="rendering/shadows/directional_shadow/size.mobile" type="int" setter="" getter="" default="2048"> - Lower-end override for [member rendering/shadows/directional_shadow/size] on mobile devices, due to performance concerns or driver support. - </member> - <member name="rendering/shadows/directional_shadow/soft_shadow_filter_quality" type="int" setter="" getter="" default="2"> - Quality setting for shadows cast by [DirectionalLight3D]s. Higher quality settings use more samples when reading from shadow maps and are thus slower. Low quality settings may result in shadows looking grainy. - [b]Note:[/b] The Soft Very Low setting will automatically multiply [i]constant[/i] shadow blur by 0.75x to reduce the amount of noise visible. This automatic blur change only affects the constant blur factor defined in [member Light3D.shadow_blur], not the variable blur performed by [DirectionalLight3D]s' [member Light3D.light_angular_distance]. - [b]Note:[/b] The Soft High and Soft Ultra settings will automatically multiply [i]constant[/i] shadow blur by 1.5× and 2× respectively to make better use of the increased sample count. This increased blur also improves stability of dynamic object shadows. - </member> - <member name="rendering/shadows/directional_shadow/soft_shadow_filter_quality.mobile" type="int" setter="" getter="" default="0"> - Lower-end override for [member rendering/shadows/directional_shadow/soft_shadow_filter_quality] on mobile devices, due to performance concerns or driver support. - </member> - <member name="rendering/shadows/positional_shadow/atlas_16_bits" type="bool" setter="" getter="" default="true"> - </member> - <member name="rendering/shadows/positional_shadow/atlas_quadrant_0_subdiv" type="int" setter="" getter="" default="2"> - Subdivision quadrant size for shadow mapping. See shadow mapping documentation. - </member> - <member name="rendering/shadows/positional_shadow/atlas_quadrant_1_subdiv" type="int" setter="" getter="" default="2"> - Subdivision quadrant size for shadow mapping. See shadow mapping documentation. - </member> - <member name="rendering/shadows/positional_shadow/atlas_quadrant_2_subdiv" type="int" setter="" getter="" default="3"> - Subdivision quadrant size for shadow mapping. See shadow mapping documentation. - </member> - <member name="rendering/shadows/positional_shadow/atlas_quadrant_3_subdiv" type="int" setter="" getter="" default="4"> - Subdivision quadrant size for shadow mapping. See shadow mapping documentation. - </member> - <member name="rendering/shadows/positional_shadow/atlas_size" type="int" setter="" getter="" default="4096"> - Size for shadow atlas (used for OmniLights and SpotLights). See documentation. - </member> - <member name="rendering/shadows/positional_shadow/atlas_size.mobile" type="int" setter="" getter="" default="2048"> - Lower-end override for [member rendering/shadows/positional_shadow/atlas_size] on mobile devices, due to performance concerns or driver support. - </member> - <member name="rendering/shadows/positional_shadow/soft_shadow_filter_quality" type="int" setter="" getter="" default="2"> - Quality setting for shadows cast by [OmniLight3D]s and [SpotLight3D]s. Higher quality settings use more samples when reading from shadow maps and are thus slower. Low quality settings may result in shadows looking grainy. - [b]Note:[/b] The Soft Very Low setting will automatically multiply [i]constant[/i] shadow blur by 0.75x to reduce the amount of noise visible. This automatic blur change only affects the constant blur factor defined in [member Light3D.shadow_blur], not the variable blur performed by [DirectionalLight3D]s' [member Light3D.light_angular_distance]. - [b]Note:[/b] The Soft High and Soft Ultra settings will automatically multiply shadow blur by 1.5× and 2× respectively to make better use of the increased sample count. This increased blur also improves stability of dynamic object shadows. - </member> - <member name="rendering/shadows/positional_shadow/soft_shadow_filter_quality.mobile" type="int" setter="" getter="" default="0"> - Lower-end override for [member rendering/shadows/positional_shadow/soft_shadow_filter_quality] on mobile devices, due to performance concerns or driver support. - </member> <member name="rendering/textures/decals/filter" type="int" setter="" getter="" default="3"> The filtering quality to use for [Decal] nodes. When using one of the anisotropic filtering modes, the anisotropic filtering level is controlled by [member rendering/textures/default_filters/anisotropic_filtering_level]. </member> |