diff options
Diffstat (limited to 'doc/classes/Node3D.xml')
| -rw-r--r-- | doc/classes/Node3D.xml | 53 |
1 files changed, 16 insertions, 37 deletions
diff --git a/doc/classes/Node3D.xml b/doc/classes/Node3D.xml index 6958f4f7d5..b6024b1887 100644 --- a/doc/classes/Node3D.xml +++ b/doc/classes/Node3D.xml @@ -6,7 +6,7 @@ <description> Most basic 3D game object, with a 3D [Transform3D] and visibility settings. All other 3D game objects inherit from Node3D. Use [Node3D] as a parent node to move, scale, rotate and show/hide children in a 3D project. Affine operations (rotate, scale, translate) happen in parent's local coordinate system, unless the [Node3D] object is set as top-level. Affine operations in this coordinate system correspond to direct affine operations on the [Node3D]'s transform. The word local below refers to this coordinate system. The coordinate system that is attached to the [Node3D] object itself is referred to as object-local coordinate system. - [b]Note:[/b] Unless otherwise specified, all methods that have angle parameters must have angles specified as [i]radians[/i]. To convert degrees to radians, use [method @GlobalScope.deg2rad]. + [b]Note:[/b] Unless otherwise specified, all methods that have angle parameters must have angles specified as [i]radians[/i]. To convert degrees to radians, use [method @GlobalScope.deg_to_rad]. </description> <tutorials> <link title="Introduction to 3D">$DOCS_URL/tutorials/3d/introduction_to_3d.html</link> @@ -39,7 +39,7 @@ </description> </method> <method name="get_gizmos" qualifiers="const"> - <return type="Array" /> + <return type="Node3DGizmo[]" /> <description> Returns all the gizmos attached to this [code]Node3D[/code]. </description> @@ -113,10 +113,10 @@ <param index="0" name="target" type="Vector3" /> <param index="1" name="up" type="Vector3" default="Vector3(0, 1, 0)" /> <description> - Rotates the node so that the local forward axis (-Z) points toward the [code]target[/code] position. - The local up axis (+Y) points as close to the [code]up[/code] vector as possible while staying perpendicular to the local forward axis. The resulting transform is orthogonal, and the scale is preserved. Non-uniform scaling may not work correctly. - The [code]target[/code] position cannot be the same as the node's position, the [code]up[/code] vector cannot be zero, and the direction from the node's position to the [code]target[/code] vector cannot be parallel to the [code]up[/code] vector. - Operations take place in global space. + Rotates the node so that the local forward axis (-Z) points toward the [param target] position. + The local up axis (+Y) points as close to the [param up] vector as possible while staying perpendicular to the local forward axis. The resulting transform is orthogonal, and the scale is preserved. Non-uniform scaling may not work correctly. + The [param target] position cannot be the same as the node's position, the [param up] vector cannot be zero, and the direction from the node's position to the [param target] vector cannot be parallel to the [param up] vector. + Operations take place in global space, which means that the node must be in the scene tree. </description> </method> <method name="look_at_from_position"> @@ -125,7 +125,7 @@ <param index="1" name="target" type="Vector3" /> <param index="2" name="up" type="Vector3" default="Vector3(0, 1, 0)" /> <description> - Moves the node to the specified [code]position[/code], and then rotates the node to point toward the [code]target[/code] as per [method look_at]. Operations take place in global space. + Moves the node to the specified [param position], and then rotates the node to point toward the [param target] as per [method look_at]. Operations take place in global space. </description> </method> <method name="orthonormalize"> @@ -134,20 +134,6 @@ Resets this node's transformations (like scale, skew and taper) preserving its rotation and translation by performing Gram-Schmidt orthonormalization on this node's [Transform3D]. </description> </method> - <method name="property_can_revert"> - <return type="bool" /> - <param index="0" name="name" type="String" /> - <description> - Returns [code]true[/code] if the property identified by [code]name[/code] can be reverted to a default value. - </description> - </method> - <method name="property_get_revert"> - <return type="Variant" /> - <param index="0" name="name" type="String" /> - <description> - Returns the default value of the Node3D property with given [code]name[/code]. - </description> - </method> <method name="rotate"> <return type="void" /> <param index="0" name="axis" type="Vector3" /> @@ -245,14 +231,14 @@ <return type="Vector3" /> <param index="0" name="local_point" type="Vector3" /> <description> - Transforms [code]local_point[/code] from this node's local space to world space. + Transforms [param local_point] from this node's local space to world space. </description> </method> <method name="to_local" qualifiers="const"> <return type="Vector3" /> <param index="0" name="global_point" type="Vector3" /> <description> - Transforms [code]global_point[/code] from world space to this node's local space. + Transforms [param global_point] from world space to this node's local space. </description> </method> <method name="translate"> @@ -260,7 +246,7 @@ <param index="0" name="offset" type="Vector3" /> <description> Changes the node's position by the given offset [Vector3]. - Note that the translation [code]offset[/code] is affected by the node's scale, so if scaled by e.g. [code](10, 1, 1)[/code], a translation by an offset of [code](2, 0, 0)[/code] would actually add 20 ([code]2 * 10[/code]) to the X coordinate. + Note that the translation [param offset] is affected by the node's scale, so if scaled by e.g. [code](10, 1, 1)[/code], a translation by an offset of [code](2, 0, 0)[/code] would actually add 20 ([code]2 * 10[/code]) to the X coordinate. </description> </method> <method name="translate_object_local"> @@ -304,12 +290,13 @@ <member name="rotation_edit_mode" type="int" setter="set_rotation_edit_mode" getter="get_rotation_edit_mode" enum="Node3D.RotationEditMode" default="0"> Specify how rotation (and scale) will be presented in the editor. </member> - <member name="rotation_order" type="int" setter="set_rotation_order" getter="get_rotation_order" enum="Node3D.RotationOrder" default="2"> + <member name="rotation_order" type="int" setter="set_rotation_order" getter="get_rotation_order" enum="EulerOrder" default="2"> Specify the axis rotation order of the [member rotation] property. The final orientation is constructed by rotating the Euler angles in the order specified by this property. </member> <member name="scale" type="Vector3" setter="set_scale" getter="get_scale" default="Vector3(1, 1, 1)"> Scale part of the local transformation. [b]Note:[/b] Mixed negative scales in 3D are not decomposable from the transformation matrix. Due to the way scale is represented with transformation matrices in Godot, the scale values will either be all positive or all negative. + [b]Note:[/b] Not all nodes are visually scaled by the [member scale] property. For example, [Light3D]s are not visually affected by [member scale]. </member> <member name="top_level" type="bool" setter="set_as_top_level" getter="is_set_as_top_level" default="false"> If [code]true[/code], the node will not inherit its transformations from its parent. Node transformations are only in global space. @@ -345,23 +332,15 @@ <constant name="NOTIFICATION_VISIBILITY_CHANGED" value="43"> Node3D nodes receives this notification when their visibility changes. </constant> + <constant name="NOTIFICATION_LOCAL_TRANSFORM_CHANGED" value="44"> + Node3D nodes receives this notification when their local transform changes. This is not received when the transform of a parent node is changed. + In order for [constant NOTIFICATION_LOCAL_TRANSFORM_CHANGED] to work, users first need to ask for it, with [method set_notify_local_transform]. + </constant> <constant name="ROTATION_EDIT_MODE_EULER" value="0" enum="RotationEditMode"> </constant> <constant name="ROTATION_EDIT_MODE_QUATERNION" value="1" enum="RotationEditMode"> </constant> <constant name="ROTATION_EDIT_MODE_BASIS" value="2" enum="RotationEditMode"> </constant> - <constant name="ROTATION_ORDER_XYZ" value="0" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_XZY" value="1" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_YXZ" value="2" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_YZX" value="3" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_ZXY" value="4" enum="RotationOrder"> - </constant> - <constant name="ROTATION_ORDER_ZYX" value="5" enum="RotationOrder"> - </constant> </constants> </class> |