diff options
Diffstat (limited to 'doc/classes/NavigationMesh.xml')
| -rw-r--r-- | doc/classes/NavigationMesh.xml | 72 |
1 files changed, 36 insertions, 36 deletions
diff --git a/doc/classes/NavigationMesh.xml b/doc/classes/NavigationMesh.xml index b100a20963..3c18b56658 100644 --- a/doc/classes/NavigationMesh.xml +++ b/doc/classes/NavigationMesh.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="NavigationMesh" inherits="Resource" version="4.0"> +<class name="NavigationMesh" inherits="Resource" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> A mesh to approximate the walkable areas and obstacles. </brief_description> @@ -34,7 +34,7 @@ <return type="bool" /> <argument index="0" name="layer_number" type="int" /> <description> - Returns whether or not the specified layer of the [member geometry/collision_mask] is enabled, given a [code]layer_number[/code] between 1 and 32. + Returns whether or not the specified layer of the [member geometry_collision_mask] is enabled, given a [code]layer_number[/code] between 1 and 32. </description> </method> <method name="get_polygon"> @@ -61,7 +61,7 @@ <argument index="0" name="layer_number" type="int" /> <argument index="1" name="value" type="bool" /> <description> - Based on [code]value[/code], enables or disables the specified layer in the [member geometry/collision_mask], given a [code]layer_number[/code] between 1 and 32. + Based on [code]value[/code], enables or disables the specified layer in the [member geometry_collision_mask], given a [code]layer_number[/code] between 1 and 32. </description> </method> <method name="set_vertices"> @@ -73,75 +73,75 @@ </method> </methods> <members> - <member name="agent/height" type="float" setter="set_agent_height" getter="get_agent_height" default="2.0"> + <member name="agent_height" type="float" setter="set_agent_height" getter="get_agent_height" default="1.5"> The minimum floor to ceiling height that will still allow the floor area to be considered walkable. - [b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell/height]. + [b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell_height]. </member> - <member name="agent/max_climb" type="float" setter="set_agent_max_climb" getter="get_agent_max_climb" default="0.9"> + <member name="agent_max_climb" type="float" setter="set_agent_max_climb" getter="get_agent_max_climb" default="0.25"> The minimum ledge height that is considered to still be traversable. - [b]Note:[/b] While baking, this value will be rounded down to the nearest multiple of [member cell/height]. + [b]Note:[/b] While baking, this value will be rounded down to the nearest multiple of [member cell_height]. </member> - <member name="agent/max_slope" type="float" setter="set_agent_max_slope" getter="get_agent_max_slope" default="45.0"> + <member name="agent_max_slope" type="float" setter="set_agent_max_slope" getter="get_agent_max_slope" default="45.0"> The maximum slope that is considered walkable, in degrees. </member> - <member name="agent/radius" type="float" setter="set_agent_radius" getter="get_agent_radius" default="1.0"> + <member name="agent_radius" type="float" setter="set_agent_radius" getter="get_agent_radius" default="0.5"> The distance to erode/shrink the walkable area of the heightfield away from obstructions. - [b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell/size]. + [b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell_size]. </member> - <member name="cell/height" type="float" setter="set_cell_height" getter="get_cell_height" default="0.2"> + <member name="cell_height" type="float" setter="set_cell_height" getter="get_cell_height" default="0.25"> The Y axis cell size to use for fields. </member> - <member name="cell/size" type="float" setter="set_cell_size" getter="get_cell_size" default="0.3"> + <member name="cell_size" type="float" setter="set_cell_size" getter="get_cell_size" default="0.25"> The XZ plane cell size to use for fields. </member> - <member name="detail/sample_distance" type="float" setter="set_detail_sample_distance" getter="get_detail_sample_distance" default="6.0"> + <member name="detail_sample_distance" type="float" setter="set_detail_sample_distance" getter="get_detail_sample_distance" default="6.0"> The sampling distance to use when generating the detail mesh, in cell unit. </member> - <member name="detail/sample_max_error" type="float" setter="set_detail_sample_max_error" getter="get_detail_sample_max_error" default="1.0"> + <member name="detail_sample_max_error" type="float" setter="set_detail_sample_max_error" getter="get_detail_sample_max_error" default="1.0"> The maximum distance the detail mesh surface should deviate from heightfield, in cell unit. </member> - <member name="edge/max_error" type="float" setter="set_edge_max_error" getter="get_edge_max_error" default="1.3"> + <member name="edge_max_error" type="float" setter="set_edge_max_error" getter="get_edge_max_error" default="1.3"> The maximum distance a simplfied contour's border edges should deviate the original raw contour. </member> - <member name="edge/max_length" type="float" setter="set_edge_max_length" getter="get_edge_max_length" default="12.0"> + <member name="edge_max_length" type="float" setter="set_edge_max_length" getter="get_edge_max_length" default="12.0"> The maximum allowed length for contour edges along the border of the mesh. - [b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell/size]. + [b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell_size]. </member> - <member name="filter/filter_walkable_low_height_spans" type="bool" setter="set_filter_walkable_low_height_spans" getter="get_filter_walkable_low_height_spans" default="false"> - If [code]true[/code], marks walkable spans as not walkable if the clearance above the span is less than [member agent/height]. - </member> - <member name="filter/ledge_spans" type="bool" setter="set_filter_ledge_spans" getter="get_filter_ledge_spans" default="false"> + <member name="filter_ledge_spans" type="bool" setter="set_filter_ledge_spans" getter="get_filter_ledge_spans" default="false"> If [code]true[/code], marks spans that are ledges as non-walkable. </member> - <member name="filter/low_hanging_obstacles" type="bool" setter="set_filter_low_hanging_obstacles" getter="get_filter_low_hanging_obstacles" default="false"> - If [code]true[/code], marks non-walkable spans as walkable if their maximum is within [member agent/max_climb] of a walkable neighbor. + <member name="filter_low_hanging_obstacles" type="bool" setter="set_filter_low_hanging_obstacles" getter="get_filter_low_hanging_obstacles" default="false"> + If [code]true[/code], marks non-walkable spans as walkable if their maximum is within [member agent_max_climb] of a walkable neighbor. + </member> + <member name="filter_walkable_low_height_spans" type="bool" setter="set_filter_walkable_low_height_spans" getter="get_filter_walkable_low_height_spans" default="false"> + If [code]true[/code], marks walkable spans as not walkable if the clearance above the span is less than [member agent_height]. </member> - <member name="geometry/collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask"> + <member name="geometry_collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="4294967295"> The physics layers to scan for static colliders. - Only used when [member geometry/parsed_geometry_type] is [constant PARSED_GEOMETRY_STATIC_COLLIDERS] or [constant PARSED_GEOMETRY_BOTH]. + Only used when [member geometry_parsed_geometry_type] is [constant PARSED_GEOMETRY_STATIC_COLLIDERS] or [constant PARSED_GEOMETRY_BOTH]. </member> - <member name="geometry/parsed_geometry_type" type="int" setter="set_parsed_geometry_type" getter="get_parsed_geometry_type" enum="NavigationMesh.ParsedGeometryType" default="0"> + <member name="geometry_parsed_geometry_type" type="int" setter="set_parsed_geometry_type" getter="get_parsed_geometry_type" enum="NavigationMesh.ParsedGeometryType" default="0"> Determines which type of nodes will be parsed as geometry. See [enum ParsedGeometryType] for possible values. </member> - <member name="geometry/source_geometry_mode" type="int" setter="set_source_geometry_mode" getter="get_source_geometry_mode" enum="NavigationMesh.SourceGeometryMode" default="0"> + <member name="geometry_source_geometry_mode" type="int" setter="set_source_geometry_mode" getter="get_source_geometry_mode" enum="NavigationMesh.SourceGeometryMode" default="0"> The source of the geometry used when baking. See [enum SourceGeometryMode] for possible values. </member> - <member name="geometry/source_group_name" type="StringName" setter="set_source_group_name" getter="get_source_group_name"> + <member name="geometry_source_group_name" type="StringName" setter="set_source_group_name" getter="get_source_group_name" default="&"navmesh""> The name of the group to scan for geometry. - Only used when [member geometry/source_geometry_mode] is [constant SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN] or [constant SOURCE_GEOMETRY_GROUPS_EXPLICIT]. + Only used when [member geometry_source_geometry_mode] is [constant SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN] or [constant SOURCE_GEOMETRY_GROUPS_EXPLICIT]. </member> - <member name="polygon/verts_per_poly" type="float" setter="set_verts_per_poly" getter="get_verts_per_poly" default="6.0"> + <member name="polygon_verts_per_poly" type="float" setter="set_verts_per_poly" getter="get_verts_per_poly" default="6.0"> The maximum number of vertices allowed for polygons generated during the contour to polygon conversion process. </member> - <member name="region/merge_size" type="float" setter="set_region_merge_size" getter="get_region_merge_size" default="20.0"> + <member name="region_merge_size" type="float" setter="set_region_merge_size" getter="get_region_merge_size" default="20.0"> Any regions with a size smaller than this will be merged with larger regions if possible. [b]Note:[/b] This value will be squared to calculate the number of cells. For example, a value of 20 will set the number of cells to 400. </member> - <member name="region/min_size" type="float" setter="set_region_min_size" getter="get_region_min_size" default="8.0"> + <member name="region_min_size" type="float" setter="set_region_min_size" getter="get_region_min_size" default="2.0"> The minimum size of a region for it to be created. [b]Note:[/b] This value will be squared to calculate the minimum number of cells allowed to form isolated island areas. For example, a value of 8 will set the number of cells to 64. </member> - <member name="sample_partition_type/sample_partition_type" type="int" setter="set_sample_partition_type" getter="get_sample_partition_type" enum="NavigationMesh.SamplePartitionType" default="0"> + <member name="sample_partition_type" type="int" setter="set_sample_partition_type" getter="get_sample_partition_type" enum="NavigationMesh.SamplePartitionType" default="0"> Partitioning algorithm for creating the navigation mesh polys. See [enum SamplePartitionType] for possible values. </member> </members> @@ -162,7 +162,7 @@ Parses mesh instances as geometry. This includes [MeshInstance3D], [CSGShape3D], and [GridMap] nodes. </constant> <constant name="PARSED_GEOMETRY_STATIC_COLLIDERS" value="1" enum="ParsedGeometryType"> - Parses [StaticBody3D] colliders as geometry. The collider should be in any of the layers specified by [member geometry/collision_mask]. + Parses [StaticBody3D] colliders as geometry. The collider should be in any of the layers specified by [member geometry_collision_mask]. </constant> <constant name="PARSED_GEOMETRY_BOTH" value="2" enum="ParsedGeometryType"> Both [constant PARSED_GEOMETRY_MESH_INSTANCES] and [constant PARSED_GEOMETRY_STATIC_COLLIDERS]. @@ -174,10 +174,10 @@ Scans the child nodes of [NavigationRegion3D] recursively for geometry. </constant> <constant name="SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN" value="1" enum="SourceGeometryMode"> - Scans nodes in a group and their child nodes recursively for geometry. The group is specified by [member geometry/source_group_name]. + Scans nodes in a group and their child nodes recursively for geometry. The group is specified by [member geometry_source_group_name]. </constant> <constant name="SOURCE_GEOMETRY_GROUPS_EXPLICIT" value="2" enum="SourceGeometryMode"> - Uses nodes in a group for geometry. The group is specified by [member geometry/source_group_name]. + Uses nodes in a group for geometry. The group is specified by [member geometry_source_group_name]. </constant> <constant name="SOURCE_GEOMETRY_MAX" value="3" enum="SourceGeometryMode"> Represents the size of the [enum SourceGeometryMode] enum. |