diff options
54 files changed, 125 insertions, 125 deletions
diff --git a/doc/classes/AnimationNodeStateMachineTransition.xml b/doc/classes/AnimationNodeStateMachineTransition.xml index aeb44a789b..0ba3e7057e 100644 --- a/doc/classes/AnimationNodeStateMachineTransition.xml +++ b/doc/classes/AnimationNodeStateMachineTransition.xml @@ -16,7 +16,7 @@ [/codeblock] </member> <member name="auto_advance" type="bool" setter="set_auto_advance" getter="has_auto_advance"> - Turn on the transition automatically when this state is reached. This works best with [code]SWITCH_MODE_AT_END[/code]. + Turn on the transition automatically when this state is reached. This works best with [constant SWITCH_MODE_AT_END]. </member> <member name="disabled" type="bool" setter="set_disabled" getter="is_disabled"> Don't use this transition during [method AnimationNodeStateMachinePlayback.travel] or [member auto_advance]. diff --git a/doc/classes/AnimationPlayer.xml b/doc/classes/AnimationPlayer.xml index ff91db2e28..3e2fad8a92 100644 --- a/doc/classes/AnimationPlayer.xml +++ b/doc/classes/AnimationPlayer.xml @@ -239,7 +239,7 @@ The position (in seconds) of the currently playing animation. </member> <member name="method_call_mode" type="int" setter="set_method_call_mode" getter="get_method_call_mode" enum="AnimationPlayer.AnimationMethodCallMode"> - The call mode to use for Call Method tracks. Default value: [code]ANIMATION_METHOD_CALL_DEFERRED[/code]. + The call mode to use for Call Method tracks. Default value: [constant ANIMATION_METHOD_CALL_DEFERRED]. </member> <member name="playback_active" type="bool" setter="set_active" getter="is_active"> If [code]true[/code], updates animations in response to process-related notifications. Default value: [code]true[/code]. @@ -248,7 +248,7 @@ The default time in which to blend animations. Ranges from 0 to 4096 with 0.01 precision. Default value: [code]0[/code]. </member> <member name="playback_process_mode" type="int" setter="set_animation_process_mode" getter="get_animation_process_mode" enum="AnimationPlayer.AnimationProcessMode"> - The process notification in which to update animations. Default value: [code]ANIMATION_PROCESS_IDLE[/code]. + The process notification in which to update animations. Default value: [constant ANIMATION_PROCESS_IDLE]. </member> <member name="playback_speed" type="float" setter="set_speed_scale" getter="get_speed_scale"> The speed scaling ratio. For instance, if this value is 1 then the animation plays at normal speed. If it's 0.5 then it plays at half speed. If it's 2 then it plays at double speed. Default value: [code]1[/code]. diff --git a/doc/classes/AnimationTreePlayer.xml b/doc/classes/AnimationTreePlayer.xml index 818565e0dc..179dc5577b 100644 --- a/doc/classes/AnimationTreePlayer.xml +++ b/doc/classes/AnimationTreePlayer.xml @@ -616,7 +616,7 @@ Once set, Animation nodes can be added to the AnimationTreePlayer. </member> <member name="playback_process_mode" type="int" setter="set_animation_process_mode" getter="get_animation_process_mode" enum="AnimationTreePlayer.AnimationProcessMode"> - The thread in which to update animations. Default value: [code]ANIMATION_PROCESS_IDLE[/code]. + The thread in which to update animations. Default value: [constant ANIMATION_PROCESS_IDLE]. </member> </members> <constants> diff --git a/doc/classes/ArrayMesh.xml b/doc/classes/ArrayMesh.xml index 3e3f040d26..19fe833334 100644 --- a/doc/classes/ArrayMesh.xml +++ b/doc/classes/ArrayMesh.xml @@ -48,7 +48,7 @@ <description> Creates a new surface. Surfaces are created to be rendered using a "primitive", which may be PRIMITIVE_POINTS, PRIMITIVE_LINES, PRIMITIVE_LINE_STRIP, PRIMITIVE_LINE_LOOP, PRIMITIVE_TRIANGLES, PRIMITIVE_TRIANGLE_STRIP, PRIMITIVE_TRIANGLE_FAN. See [Mesh] for details. (As a note, when using indices, it is recommended to only use points, lines or triangles). [method Mesh.get_surface_count] will become the [code]surf_idx[/code] for this new surface. - The [code]arrays[/code] argument is an array of arrays. See [enum ArrayType] for the values used in this array. For example, [code]arrays[0][/code] is the array of vertices. That first vertex sub-array is always required; the others are optional. Adding an index array puts this function into "index mode" where the vertex and other arrays become the sources of data and the index array defines the vertex order. All sub-arrays must have the same length as the vertex array or be empty, except for [code]ARRAY_INDEX[/code] if it is used. + The [code]arrays[/code] argument is an array of arrays. See [enum ArrayType] for the values used in this array. For example, [code]arrays[0][/code] is the array of vertices. That first vertex sub-array is always required; the others are optional. Adding an index array puts this function into "index mode" where the vertex and other arrays become the sources of data and the index array defines the vertex order. All sub-arrays must have the same length as the vertex array or be empty, except for [constant ARRAY_INDEX] if it is used. Adding an index array puts this function into "index mode" where the vertex and other arrays become the sources of data, and the index array defines the order of the vertices. Godot uses clockwise winding order for front faces of triangle primitive modes. </description> diff --git a/doc/classes/AudioEffectDistortion.xml b/doc/classes/AudioEffectDistortion.xml index 4393f942f0..cf02a8fb6d 100644 --- a/doc/classes/AudioEffectDistortion.xml +++ b/doc/classes/AudioEffectDistortion.xml @@ -20,7 +20,7 @@ High-pass filter. Frequencies higher than this value will not be affected by the distortion. Value can range from 1 to 20000. Default value: [code]16000[/code]. </member> <member name="mode" type="int" setter="set_mode" getter="get_mode" enum="AudioEffectDistortion.Mode"> - Distortion type. Default value: [code]MODE_CLIP[/code]. + Distortion type. Default value: [constant MODE_CLIP]. </member> <member name="post_gain" type="float" setter="set_post_gain" getter="get_post_gain"> Increases or decreases the volume after the effect. Value can range from -80 to 24. Default value: [code]0[/code]. diff --git a/doc/classes/BackBufferCopy.xml b/doc/classes/BackBufferCopy.xml index 65e8774c59..1ee4f08a38 100644 --- a/doc/classes/BackBufferCopy.xml +++ b/doc/classes/BackBufferCopy.xml @@ -12,10 +12,10 @@ </methods> <members> <member name="copy_mode" type="int" setter="set_copy_mode" getter="get_copy_mode" enum="BackBufferCopy.CopyMode"> - Buffer mode. See [code]COPY_MODE_*[/code] constants. + Buffer mode. See [enum CopyMode] constants. </member> <member name="rect" type="Rect2" setter="set_rect" getter="get_rect"> - The area covered by the BackBufferCopy. Only used if [code]copy_mode[/code] is [code]COPY_MODE_RECT[/code]. + The area covered by the BackBufferCopy. Only used if [member copy_mode] is [constant COPY_MODE_RECT]. </member> </members> <constants> diff --git a/doc/classes/Camera.xml b/doc/classes/Camera.xml index cc869d28a2..b7d983afa2 100644 --- a/doc/classes/Camera.xml +++ b/doc/classes/Camera.xml @@ -168,7 +168,7 @@ If [code]true[/code], the ancestor [Viewport] is currently using this Camera. Default value: [code]false[/code]. </member> <member name="doppler_tracking" type="int" setter="set_doppler_tracking" getter="get_doppler_tracking" enum="Camera.DopplerTracking"> - If not [code]DOPPLER_TRACKING_DISABLED[/code] this Camera will simulate the Doppler effect for objects changed in particular [code]_process[/code] methods. Default value: [code]DOPPLER_TRACKING_DISABLED[/code]. + If not [constant DOPPLER_TRACKING_DISABLED] this Camera will simulate the Doppler effect for objects changed in particular [code]_process[/code] methods. Default value: [constant DOPPLER_TRACKING_DISABLED]. </member> <member name="environment" type="Environment" setter="set_environment" getter="get_environment"> The [Environment] to use for this Camera. @@ -185,13 +185,13 @@ The horizontal (X) offset of the Camera viewport. </member> <member name="keep_aspect" type="int" setter="set_keep_aspect_mode" getter="get_keep_aspect_mode" enum="Camera.KeepAspect"> - The axis to lock during [member fov]/[member size] adjustments. Can be either [code]KEEP_WIDTH[/code] or [code]KEEP_HEIGHT[/code]. + The axis to lock during [member fov]/[member size] adjustments. Can be either [constant KEEP_WIDTH] or [constant KEEP_HEIGHT]. </member> <member name="near" type="float" setter="set_znear" getter="get_znear"> The distance to the near culling boundary for this Camera relative to its local z-axis. </member> <member name="projection" type="int" setter="set_projection" getter="get_projection" enum="Camera.Projection"> - The camera's projection mode. In [code]PROJECTION_PERSPECTIVE[/code] mode, objects' z-distance from the camera's local space scales their perceived size. + The camera's projection mode. In [constant PROJECTION_PERSPECTIVE] mode, objects' z-distance from the camera's local space scales their perceived size. </member> <member name="size" type="float" setter="set_size" getter="get_size"> The camera's size measured as 1/2 the width or height. Only applicable in orthogonal mode. Since [member keep_aspect] locks on axis, [code]size[/code] sets the other axis' size length. diff --git a/doc/classes/CollisionPolygon2D.xml b/doc/classes/CollisionPolygon2D.xml index 3d609fa965..b0c514affc 100644 --- a/doc/classes/CollisionPolygon2D.xml +++ b/doc/classes/CollisionPolygon2D.xml @@ -12,7 +12,7 @@ </methods> <members> <member name="build_mode" type="int" setter="set_build_mode" getter="get_build_mode" enum="CollisionPolygon2D.BuildMode"> - Collision build mode. Use one of the [code]BUILD_*[/code] constants. Default value: [code]BUILD_SOLIDS[/code]. + Collision build mode. Use one of the [code]BUILD_*[/code] constants. Default value: [constant BUILD_SOLIDS]. </member> <member name="disabled" type="bool" setter="set_disabled" getter="is_disabled"> If [code]true[/code], no collisions will be detected. diff --git a/doc/classes/ConfigFile.xml b/doc/classes/ConfigFile.xml index 68831a886a..b65f3c5609 100644 --- a/doc/classes/ConfigFile.xml +++ b/doc/classes/ConfigFile.xml @@ -94,7 +94,7 @@ <argument index="0" name="path" type="String"> </argument> <description> - Loads the config file specified as a parameter. The file's contents are parsed and loaded in the ConfigFile object which the method was called on. Returns one of the [code]OK[/code], [code]FAILED[/code] or [code]ERR_*[/code] constants listed in [@GlobalScope]. If the load was successful, the return value is [code]OK[/code]. + Loads the config file specified as a parameter. The file's contents are parsed and loaded in the ConfigFile object which the method was called on. Returns one of the [constant OK], [constant FAILED] or [code]ERR_*[/code] constants listed in [@GlobalScope]. If the load was successful, the return value is [constant OK]. </description> </method> <method name="save"> @@ -103,7 +103,7 @@ <argument index="0" name="path" type="String"> </argument> <description> - Saves the contents of the ConfigFile object to the file specified as a parameter. The output file uses an INI-style structure. Returns one of the [code]OK[/code], [code]FAILED[/code] or [code]ERR_*[/code] constants listed in [@GlobalScope]. If the load was successful, the return value is [code]OK[/code]. + Saves the contents of the ConfigFile object to the file specified as a parameter. The output file uses an INI-style structure. Returns one of the [constant OK], [constant FAILED] or [code]ERR_*[/code] constants listed in [@GlobalScope]. If the load was successful, the return value is [constant OK]. </description> </method> <method name="set_value"> diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index fea706987c..d2c6b02e6e 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -645,16 +645,16 @@ </methods> <members> <member name="anchor_bottom" type="float" setter="_set_anchor" getter="get_anchor"> - Anchors the bottom edge of the node to the origin, the center, or the end of its parent control. It changes how the bottom margin updates when the node moves or changes size. You can use one of the [code]ANCHOR_*[/code] constants for convenience. Default value: [code]ANCHOR_BEGIN[/code]. + Anchors the bottom edge of the node to the origin, the center, or the end of its parent control. It changes how the bottom margin updates when the node moves or changes size. You can use one of the [code]ANCHOR_*[/code] constants for convenience. Default value: [constant ANCHOR_BEGIN]. </member> <member name="anchor_left" type="float" setter="_set_anchor" getter="get_anchor"> - Anchors the left edge of the node to the origin, the center or the end of its parent control. It changes how the left margin updates when the node moves or changes size. You can use one of the [code]ANCHOR_*[/code] constants for convenience.Default value: [code]ANCHOR_BEGIN[/code]. + Anchors the left edge of the node to the origin, the center or the end of its parent control. It changes how the left margin updates when the node moves or changes size. You can use one of the [code]ANCHOR_*[/code] constants for convenience.Default value: [constant ANCHOR_BEGIN]. </member> <member name="anchor_right" type="float" setter="_set_anchor" getter="get_anchor"> - Anchors the right edge of the node to the origin, the center or the end of its parent control. It changes how the right margin updates when the node moves or changes size. You can use one of the [code]ANCHOR_*[/code] constants for convenience. Default value: [code]ANCHOR_BEGIN[/code]. + Anchors the right edge of the node to the origin, the center or the end of its parent control. It changes how the right margin updates when the node moves or changes size. You can use one of the [code]ANCHOR_*[/code] constants for convenience. Default value: [constant ANCHOR_BEGIN]. </member> <member name="anchor_top" type="float" setter="_set_anchor" getter="get_anchor"> - Anchors the top edge of the node to the origin, the center or the end of its parent control. It changes how the top margin updates when the node moves or changes size. You can use one of the [code]ANCHOR_*[/code] constants for convenience. Default value: [code]ANCHOR_BEGIN[/code]. + Anchors the top edge of the node to the origin, the center or the end of its parent control. It changes how the top margin updates when the node moves or changes size. You can use one of the [code]ANCHOR_*[/code] constants for convenience. Default value: [constant ANCHOR_BEGIN]. </member> <member name="focus_mode" type="int" setter="set_focus_mode" getter="get_focus_mode" enum="Control.FocusMode"> The focus access mode for the control (None, Click or All). Only one Control can be focused at the same time, and it will receive keyboard signals. @@ -739,7 +739,7 @@ Tells the parent [Container] nodes how they should resize and place the node on the X axis. Use one of the [code]SIZE_*[/code] constants to change the flags. See the constants to learn what each does. </member> <member name="size_flags_stretch_ratio" type="float" setter="set_stretch_ratio" getter="get_stretch_ratio"> - If the node and at least one of its neighbours uses the [code]SIZE_EXPAND[/code] size flag, the parent [Container] will let it take more or less space depending on this property. If this node has a stretch ratio of 2 and its neighbour a ratio of 1, this node will take two thirds of the available space. + If the node and at least one of its neighbours uses the [constant SIZE_EXPAND] size flag, the parent [Container] will let it take more or less space depending on this property. If this node has a stretch ratio of 2 and its neighbour a ratio of 1, this node will take two thirds of the available space. </member> <member name="size_flags_vertical" type="int" setter="set_v_size_flags" getter="get_v_size_flags"> Tells the parent [Container] nodes how they should resize and place the node on the Y axis. Use one of the [code]SIZE_*[/code] constants to change the flags. See the constants to learn what each does. @@ -871,16 +871,16 @@ Show the system's window resize mouse cursor when the user hovers the node. The cursor is a double headed arrow that goes from the bottom left to the top right. It tells the user they can resize the window or the panel both horizontally and vertically. </constant> <constant name="CURSOR_FDIAGSIZE" value="12" enum="CursorShape"> - Show the system's window resize mouse cursor when the user hovers the node. The cursor is a double headed arrow that goes from the top left to the bottom right, the opposite of [code]CURSOR_BDIAGSIZE[/code]. It tells the user they can resize the window or the panel both horizontally and vertically. + Show the system's window resize mouse cursor when the user hovers the node. The cursor is a double headed arrow that goes from the top left to the bottom right, the opposite of [constant CURSOR_BDIAGSIZE]. It tells the user they can resize the window or the panel both horizontally and vertically. </constant> <constant name="CURSOR_MOVE" value="13" enum="CursorShape"> Show the system's move mouse cursor when the user hovers the node. It shows 2 double-headed arrows at a 90 degree angle. It tells the user they can move a UI element freely. </constant> <constant name="CURSOR_VSPLIT" value="14" enum="CursorShape"> - Show the system's vertical split mouse cursor when the user hovers the node. On Windows, it's the same as [code]CURSOR_VSIZE[/code]. + Show the system's vertical split mouse cursor when the user hovers the node. On Windows, it's the same as [constant CURSOR_VSIZE]. </constant> <constant name="CURSOR_HSPLIT" value="15" enum="CursorShape"> - Show the system's horizontal split mouse cursor when the user hovers the node. On Windows, it's the same as [code]CURSOR_HSIZE[/code]. + Show the system's horizontal split mouse cursor when the user hovers the node. On Windows, it's the same as [constant CURSOR_HSIZE]. </constant> <constant name="CURSOR_HELP" value="16" enum="CursorShape"> Show the system's help mouse cursor when the user hovers the node, a question mark. diff --git a/doc/classes/Curve.xml b/doc/classes/Curve.xml index 20afb03048..f7af2c159f 100644 --- a/doc/classes/Curve.xml +++ b/doc/classes/Curve.xml @@ -23,7 +23,7 @@ <argument index="4" name="right_mode" type="int" enum="Curve.TangentMode" default="0"> </argument> <description> - Adds a point to the curve. For each side, if the [code]*_mode[/code] is [code]TANGENT_LINEAR[/code], the [code]*_tangent[/code] angle (in degrees) uses the slope of the curve halfway to the adjacent point. Allows custom assignments to the [code]*_tangent[/code] angle if [code]*_mode[/code] is set to [code]TANGENT_FREE[/code]. + Adds a point to the curve. For each side, if the [code]*_mode[/code] is [constant TANGENT_LINEAR], the [code]*_tangent[/code] angle (in degrees) uses the slope of the curve halfway to the adjacent point. Allows custom assignments to the [code]*_tangent[/code] angle if [code]*_mode[/code] is set to [constant TANGENT_FREE]. </description> </method> <method name="bake"> diff --git a/doc/classes/Curve3D.xml b/doc/classes/Curve3D.xml index 7fda8aaa93..2966e2f8c0 100644 --- a/doc/classes/Curve3D.xml +++ b/doc/classes/Curve3D.xml @@ -246,7 +246,7 @@ The distance in meters between two adjacent cached points. Changing it forces the cache to be recomputed the next time the [method get_baked_points] or [method get_baked_length] function is called. The smaller the distance, the more points in the cache and the more memory it will consume, so use with care. </member> <member name="up_vector_enabled" type="bool" setter="set_up_vector_enabled" getter="is_up_vector_enabled"> - If [code]true[/code], the curve will bake up vectors used for orientation. This is used when a [member PathFollow.rotation_mode] is set to [code]ROTATION_ORIENTED[/code], see [PathFollow] for details. Changing it forces the cache to be recomputed. + If [code]true[/code], the curve will bake up vectors used for orientation. This is used when [member PathFollow.rotation_mode] is set to [constant PathFollow.ROTATION_ORIENTED]. Changing it forces the cache to be recomputed. </member> </members> <constants> diff --git a/doc/classes/EditorImportPlugin.xml b/doc/classes/EditorImportPlugin.xml index c3f38e9e20..e66596412b 100644 --- a/doc/classes/EditorImportPlugin.xml +++ b/doc/classes/EditorImportPlugin.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="EditorImportPlugin" inherits="Reference" category="Core" version="3.2"> +<class name="EditorImportPlugin" inherits="ResourceImporter" category="Core" version="3.2"> <brief_description> Registers a custom resource importer in the editor. Use the class to parse any file and import it as a new resource type. </brief_description> diff --git a/doc/classes/FileDialog.xml b/doc/classes/FileDialog.xml index 908c017ac9..f8df356da2 100644 --- a/doc/classes/FileDialog.xml +++ b/doc/classes/FileDialog.xml @@ -74,7 +74,7 @@ Set dialog to open or save mode, changes selection behavior. See enum [code]Mode[/code] constants. </member> <member name="mode_overrides_title" type="bool" setter="set_mode_overrides_title" getter="is_mode_overriding_title"> - If [code]true[/code], changing the [code]Mode[/code] property will set the window title accordingly (e.g. setting mode to [code]MODE_OPEN_FILE[/code] will change the window title to "Open a File"). + If [code]true[/code], changing the [code]Mode[/code] property will set the window title accordingly (e.g. setting mode to [constant MODE_OPEN_FILE] will change the window title to "Open a File"). </member> <member name="show_hidden_files" type="bool" setter="set_show_hidden_files" getter="is_showing_hidden_files"> If [code]true[/code], the dialog will show hidden files. diff --git a/doc/classes/Geometry.xml b/doc/classes/Geometry.xml index 4fd2bcf3c7..002b224d6f 100644 --- a/doc/classes/Geometry.xml +++ b/doc/classes/Geometry.xml @@ -67,7 +67,7 @@ <argument index="1" name="polygon_b" type="PoolVector2Array"> </argument> <description> - Clips [code]polygon_a[/code] against [code]polygon_b[/code] and returns an array of clipped polygons. This performs [code]OPERATION_DIFFERENCE[/code] between polygons. Returns an empty array if [code]polygon_b[/code] completely overlaps [code]polygon_a[/code]. + Clips [code]polygon_a[/code] against [code]polygon_b[/code] and returns an array of clipped polygons. This performs [constant OPERATION_DIFFERENCE] between polygons. Returns an empty array if [code]polygon_b[/code] completely overlaps [code]polygon_a[/code]. If [code]polygon_b[/code] is enclosed by [code]polygon_a[/code], returns an outer polygon (boundary) and inner polygon (hole) which could be distinguished by calling [method is_polygon_clockwise]. </description> </method> @@ -79,7 +79,7 @@ <argument index="1" name="polygon" type="PoolVector2Array"> </argument> <description> - Clips [code]polyline[/code] against [code]polygon[/code] and returns an array of clipped polylines. This performs [code]OPERATION_DIFFERENCE[/code] between the polyline and the polygon. This operation can be thought of as cutting a line with a closed shape. + Clips [code]polyline[/code] against [code]polygon[/code] and returns an array of clipped polylines. This performs [constant OPERATION_DIFFERENCE] between the polyline and the polygon. This operation can be thought of as cutting a line with a closed shape. </description> </method> <method name="convex_hull_2d"> @@ -99,7 +99,7 @@ <argument index="1" name="polygon_b" type="PoolVector2Array"> </argument> <description> - Mutually excludes common area defined by intersection of [code]polygon_a[/code] and [code]polygon_b[/code] (see [method intersect_polygons_2d]) and returns an array of excluded polygons. This performs [code]OPERATION_XOR[/code] between polygons. In other words, returns all but common area between polygons. + Mutually excludes common area defined by intersection of [code]polygon_a[/code] and [code]polygon_b[/code] (see [method intersect_polygons_2d]) and returns an array of excluded polygons. This performs [constant OPERATION_XOR] between polygons. In other words, returns all but common area between polygons. The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distinguished by calling [method is_polygon_clockwise]. </description> </method> @@ -201,7 +201,7 @@ <argument index="1" name="polygon_b" type="PoolVector2Array"> </argument> <description> - Intersects [code]polygon_a[/code] with [code]polygon_b[/code] and returns an array of intersected polygons. This performs [code]OPERATION_INTERSECTION[/code] between polygons. In other words, returns common area shared by polygons. Returns an empty array if no intersection occurs. + Intersects [code]polygon_a[/code] with [code]polygon_b[/code] and returns an array of intersected polygons. This performs [constant OPERATION_INTERSECTION] between polygons. In other words, returns common area shared by polygons. Returns an empty array if no intersection occurs. The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distinguished by calling [method is_polygon_clockwise]. </description> </method> @@ -213,7 +213,7 @@ <argument index="1" name="polygon" type="PoolVector2Array"> </argument> <description> - Intersects [code]polyline[/code] with [code]polygon[/code] and returns an array of intersected polylines. This performs [code]OPERATION_INTERSECTION[/code] between the polyline and the polygon. This operation can be thought of as chopping a line with a closed shape. + Intersects [code]polyline[/code] with [code]polygon[/code] and returns an array of intersected polylines. This performs [constant OPERATION_INTERSECTION] between the polyline and the polygon. This operation can be thought of as chopping a line with a closed shape. </description> </method> <method name="is_point_in_polygon"> @@ -268,7 +268,7 @@ <argument index="1" name="polygon_b" type="PoolVector2Array"> </argument> <description> - Merges (combines) [code]polygon_a[/code] and [code]polygon_b[/code] and returns an array of merged polygons. This performs [code]OPERATION_UNION[/code] between polygons. + Merges (combines) [code]polygon_a[/code] and [code]polygon_b[/code] and returns an array of merged polygons. This performs [constant OPERATION_UNION] between polygons. The operation may result in an outer polygon (boundary) and inner polygon (hole) produced which could be distinguished by calling [method is_polygon_clockwise]. </description> </method> diff --git a/doc/classes/HTTPClient.xml b/doc/classes/HTTPClient.xml index 16f9531dbd..325e6ca48e 100644 --- a/doc/classes/HTTPClient.xml +++ b/doc/classes/HTTPClient.xml @@ -193,7 +193,7 @@ HTTP POST method. The POST method is used to submit an entity to the specified resource, often causing a change in state or side effects on the server. This is often used for forms and submitting data or uploading files. </constant> <constant name="METHOD_PUT" value="3" enum="Method"> - HTTP PUT method. The PUT method asks to replace all current representations of the target resource with the request payload. (You can think of [code]POST[/code] as "create or update" and [code]PUT[/code] as "update", although many services tend to not make a clear distinction or change their meaning). + HTTP PUT method. The PUT method asks to replace all current representations of the target resource with the request payload. (You can think of POST as "create or update" and PUT as "update", although many services tend to not make a clear distinction or change their meaning). </constant> <constant name="METHOD_DELETE" value="4" enum="Method"> HTTP DELETE method. The DELETE method requests to delete the specified resource. diff --git a/doc/classes/HTTPRequest.xml b/doc/classes/HTTPRequest.xml index 3dccc8e741..fcf1c32f7f 100644 --- a/doc/classes/HTTPRequest.xml +++ b/doc/classes/HTTPRequest.xml @@ -54,7 +54,7 @@ </argument> <description> Creates request on the underlying [HTTPClient]. If there is no configuration errors, it tries to connect using [method HTTPClient.connect_to_host] and passes parameters onto [method HTTPClient.request]. - Returns [code]OK[/code] if request is successfully created. (Does not imply that the server has responded), [code]ERR_UNCONFIGURED[/code] if not in the tree, [code]ERR_BUSY[/code] if still processing previous request, [code]ERR_INVALID_PARAMETER[/code] if given string is not a valid URL format, or [code]ERR_CANT_CONNECT[/code] if not using thread and the [HTTPClient] cannot connect to host. + Returns [constant @GlobalScope.OK] if request is successfully created. (Does not imply that the server has responded), [constant @GlobalScope.ERR_UNCONFIGURED] if not in the tree, [constant @GlobalScope.ERR_BUSY] if still processing previous request, [constant @GlobalScope.ERR_INVALID_PARAMETER] if given string is not a valid URL format, or [constant @GlobalScope.ERR_CANT_CONNECT] if not using thread and the [HTTPClient] cannot connect to host. </description> </method> </methods> diff --git a/doc/classes/IP.xml b/doc/classes/IP.xml index 65b1700333..1d64ee1085 100644 --- a/doc/classes/IP.xml +++ b/doc/classes/IP.xml @@ -105,10 +105,10 @@ DNS hostname resolver status: Error. </constant> <constant name="RESOLVER_MAX_QUERIES" value="32"> - Maximum number of concurrent DNS resolver queries allowed, [code]RESOLVER_INVALID_ID[/code] is returned if exceeded. + Maximum number of concurrent DNS resolver queries allowed, [constant RESOLVER_INVALID_ID] is returned if exceeded. </constant> <constant name="RESOLVER_INVALID_ID" value="-1"> - Invalid ID constant. Returned if [code]RESOLVER_MAX_QUERIES[/code] is exceeded. + Invalid ID constant. Returned if [constant RESOLVER_MAX_QUERIES] is exceeded. </constant> <constant name="TYPE_NONE" value="0" enum="Type"> Address type: None. diff --git a/doc/classes/Image.xml b/doc/classes/Image.xml index d7c3c0af78..f2b6ddc7e9 100644 --- a/doc/classes/Image.xml +++ b/doc/classes/Image.xml @@ -600,7 +600,7 @@ </constant> <constant name="INTERPOLATE_TRILINEAR" value="3" enum="Interpolation"> Performs bilinear separately on the two most suited mipmap levels, then linearly interpolates between them. - It's slower than [code]INTERPOLATE_BILINEAR[/code], but produces higher quality results, with much less aliasing artifacts. + It's slower than [constant INTERPOLATE_BILINEAR], but produces higher quality results, with much less aliasing artifacts. If the image does not have mipmaps, they will be generated and used internally, but no mipmaps will be generated on the resulting image. (Note that if you intend to scale multiple copies of the original image, it's better to call [code]generate_mipmaps[/code] on it in advance, to avoid wasting processing power in generating them again and again.) On the other hand, if the image already has mipmaps, they will be used, and a new set will be generated for the resulting image. </constant> diff --git a/doc/classes/ImageTexture.xml b/doc/classes/ImageTexture.xml index e5a8fee767..00a3c5c614 100644 --- a/doc/classes/ImageTexture.xml +++ b/doc/classes/ImageTexture.xml @@ -73,7 +73,7 @@ </methods> <members> <member name="lossy_quality" type="float" setter="set_lossy_storage_quality" getter="get_lossy_storage_quality"> - The storage quality for [code]STORAGE_COMPRESS_LOSSY[/code]. + The storage quality for [constant STORAGE_COMPRESS_LOSSY]. </member> <member name="storage" type="int" setter="set_storage" getter="get_storage" enum="ImageTexture.Storage"> The storage type (raw, lossy, or compressed). diff --git a/doc/classes/Input.xml b/doc/classes/Input.xml index 9c41e4bf1d..1c2826ee57 100644 --- a/doc/classes/Input.xml +++ b/doc/classes/Input.xml @@ -316,7 +316,7 @@ <argument index="0" name="shape" type="int" enum="Input.CursorShape" default="0"> </argument> <description> - Sets the default cursor shape to be used in the viewport instead of [code]CURSOR_ARROW[/code]. + Sets the default cursor shape to be used in the viewport instead of [constant CURSOR_ARROW]. Note that if you want to change the default cursor shape for [Control]'s nodes, use [member Control.mouse_default_cursor_shape] instead. </description> </method> @@ -413,7 +413,7 @@ Wait cursor. Indicates that the application is busy performing an operation. </constant> <constant name="CURSOR_BUSY" value="5" enum="CursorShape"> - Busy cursor. See [code]CURSOR_WAIT[/code]. + Busy cursor. See [constant CURSOR_WAIT]. </constant> <constant name="CURSOR_DRAG" value="6" enum="CursorShape"> Drag cursor. Usually displayed when dragging something. @@ -434,16 +434,16 @@ Window resize mouse cursor. The cursor is a double headed arrow that goes from the bottom left to the top right. It tells the user they can resize the window or the panel both horizontally and vertically. </constant> <constant name="CURSOR_FDIAGSIZE" value="12" enum="CursorShape"> - Window resize mouse cursor. The cursor is a double headed arrow that goes from the top left to the bottom right, the opposite of [code]CURSOR_BDIAGSIZE[/code]. It tells the user they can resize the window or the panel both horizontally and vertically. + Window resize mouse cursor. The cursor is a double headed arrow that goes from the top left to the bottom right, the opposite of [constant CURSOR_BDIAGSIZE]. It tells the user they can resize the window or the panel both horizontally and vertically. </constant> <constant name="CURSOR_MOVE" value="13" enum="CursorShape"> Move cursor. Indicates that something can be moved. </constant> <constant name="CURSOR_VSPLIT" value="14" enum="CursorShape"> - Vertical split mouse cursor. On Windows, it's the same as [code]CURSOR_VSIZE[/code]. + Vertical split mouse cursor. On Windows, it's the same as [constant CURSOR_VSIZE]. </constant> <constant name="CURSOR_HSPLIT" value="15" enum="CursorShape"> - Horizontal split mouse cursor. On Windows, it's the same as [code]CURSOR_HSIZE[/code]. + Horizontal split mouse cursor. On Windows, it's the same as [constant CURSOR_HSIZE]. </constant> <constant name="CURSOR_HELP" value="16" enum="CursorShape"> Help cursor. Usually a question mark. diff --git a/doc/classes/InputEvent.xml b/doc/classes/InputEvent.xml index 934597d0c6..335506867f 100644 --- a/doc/classes/InputEvent.xml +++ b/doc/classes/InputEvent.xml @@ -49,7 +49,7 @@ <argument index="0" name="action" type="String"> </argument> <description> - Returns [code]true[/code] if the given action is being pressed (and is not an echo event for KEY events). Not relevant for the event types [code]MOUSE_MOTION[/code], [code]SCREEN_DRAG[/code] or [code]NONE[/code]. + Returns [code]true[/code] if the given action is being pressed (and is not an echo event for [InputEventKey] events). Not relevant for events of type [InputEventMouseMotion] or [InputEventScreenDrag]. </description> </method> <method name="is_action_released" qualifiers="const"> @@ -58,28 +58,28 @@ <argument index="0" name="action" type="String"> </argument> <description> - Returns [code]true[/code] if the given action is released (i.e. not pressed). Not relevant for the event types [code]MOUSE_MOTION[/code], [code]SCREEN_DRAG[/code] or [code]NONE[/code]. + Returns [code]true[/code] if the given action is released (i.e. not pressed). Not relevant for events of type [InputEventMouseMotion] or [InputEventScreenDrag]. </description> </method> <method name="is_action_type" qualifiers="const"> <return type="bool"> </return> <description> - Returns [code]true[/code] if this input event's type is one of the [InputEvent] constants. + Returns [code]true[/code] if this input event's type is one that can be assigned to an input action. </description> </method> <method name="is_echo" qualifiers="const"> <return type="bool"> </return> <description> - Returns [code]true[/code] if this input event is an echo event (only for events of type KEY). + Returns [code]true[/code] if this input event is an echo event (only for events of type [InputEventKey]). </description> </method> <method name="is_pressed" qualifiers="const"> <return type="bool"> </return> <description> - Returns [code]true[/code] if this input event is pressed. Not relevant for the event types [code]MOUSE_MOTION[/code], [code]SCREEN_DRAG[/code] or [code]NONE[/code]. + Returns [code]true[/code] if this input event is pressed. Not relevant for events of type [InputEventMouseMotion] or [InputEventScreenDrag]. </description> </method> <method name="shortcut_match" qualifiers="const"> diff --git a/doc/classes/InputEventWithModifiers.xml b/doc/classes/InputEventWithModifiers.xml index de120446fb..9ea9ff7bef 100644 --- a/doc/classes/InputEventWithModifiers.xml +++ b/doc/classes/InputEventWithModifiers.xml @@ -4,7 +4,7 @@ Base class for keys events with modifiers. </brief_description> <description> - Contains keys events information with modifiers support like [code]SHIFT[/code] or [code]ALT[/code]. See [method Node._input]. + Contains keys events information with modifiers support like [code]Shift[/code] or [code]Alt[/code]. See [method Node._input]. </description> <tutorials> <link>https://docs.godotengine.org/en/latest/tutorials/inputs/inputevent.html</link> @@ -13,19 +13,19 @@ </methods> <members> <member name="alt" type="bool" setter="set_alt" getter="get_alt"> - State of the Alt modifier. + State of the [code]Alt[/code] modifier. </member> <member name="command" type="bool" setter="set_command" getter="get_command"> - State of the Command modifier. + State of the [code]Command[/code] modifier. </member> <member name="control" type="bool" setter="set_control" getter="get_control"> - State of the Ctrl modifier. + State of the [code]Ctrl[/code] modifier. </member> <member name="meta" type="bool" setter="set_metakey" getter="get_metakey"> - State of the Meta modifier. + State of the [code]Meta[/code] modifier. </member> <member name="shift" type="bool" setter="set_shift" getter="get_shift"> - State of the Shift modifier. + State of the [code]Shift[/code] modifier. </member> </members> <constants> diff --git a/doc/classes/Light2D.xml b/doc/classes/Light2D.xml index bc3fafdf55..a83b48da88 100644 --- a/doc/classes/Light2D.xml +++ b/doc/classes/Light2D.xml @@ -43,7 +43,7 @@ Minimum layer value of objects that are affected by the Light2D. Default value: [code]0[/code]. </member> <member name="range_z_max" type="int" setter="set_z_range_max" getter="get_z_range_max"> - Maximum [code]Z[/code] value of objects that are affected by the Light2D. Default value: [code]1024[/code]. + Maximum [code]z[/code] value of objects that are affected by the Light2D. Default value: [code]1024[/code]. </member> <member name="range_z_min" type="int" setter="set_z_range_min" getter="get_z_range_min"> Minimum [code]z[/code] value of objects that are affected by the Light2D. Default value: [code]-1024[/code]. diff --git a/doc/classes/Line2D.xml b/doc/classes/Line2D.xml index c55760767a..8a13e044f0 100644 --- a/doc/classes/Line2D.xml +++ b/doc/classes/Line2D.xml @@ -67,13 +67,13 @@ </methods> <members> <member name="begin_cap_mode" type="int" setter="set_begin_cap_mode" getter="get_begin_cap_mode" enum="Line2D.LineCapMode"> - Controls the style of the line's first point. Use [code]LINE_CAP_*[/code] constants. Default value: [code]LINE_CAP_NONE[/code]. + Controls the style of the line's first point. Use [code]LINE_CAP_*[/code] constants. Default value: [constant LINE_CAP_NONE]. </member> <member name="default_color" type="Color" setter="set_default_color" getter="get_default_color"> The line's color. Will not be used if a gradient is set. </member> <member name="end_cap_mode" type="int" setter="set_end_cap_mode" getter="get_end_cap_mode" enum="Line2D.LineCapMode"> - Controls the style of the line's last point. Use [code]LINE_CAP_*[/code] constants. Default value: [code]LINE_CAP_NONE[/code]. + Controls the style of the line's last point. Use [code]LINE_CAP_*[/code] constants. Default value: [constant LINE_CAP_NONE]. </member> <member name="gradient" type="Gradient" setter="set_gradient" getter="get_gradient"> The gradient is drawn through the whole line from start to finish. The default color will not be used if a gradient is set. @@ -88,13 +88,13 @@ The smoothness of the rounded joints and caps. This is only used if a cap or joint is set as round. </member> <member name="sharp_limit" type="float" setter="set_sharp_limit" getter="get_sharp_limit"> - The direction difference in radians between vector points. This value is only used if [code]joint mode[/code] is set to [code]LINE_JOINT_SHARP[/code]. + The direction difference in radians between vector points. This value is only used if [code]joint mode[/code] is set to [constant LINE_JOINT_SHARP]. </member> <member name="texture" type="Texture" setter="set_texture" getter="get_texture"> The texture used for the line's texture. Uses [code]texture_mode[/code] for drawing style. </member> <member name="texture_mode" type="int" setter="set_texture_mode" getter="get_texture_mode" enum="Line2D.LineTextureMode"> - The style to render the [code]texture[/code] on the line. Use [code]LINE_TEXTURE_*[/code] constants. Default value: [code]LINE_TEXTURE_NONE[/code]. + The style to render the [code]texture[/code] on the line. Use [code]LINE_TEXTURE_*[/code] constants. Default value: [constant LINE_TEXTURE_NONE]. </member> <member name="width" type="float" setter="set_width" getter="get_width"> The line's width. diff --git a/doc/classes/MeshDataTool.xml b/doc/classes/MeshDataTool.xml index eeb251c8c7..5cee9915ff 100644 --- a/doc/classes/MeshDataTool.xml +++ b/doc/classes/MeshDataTool.xml @@ -46,7 +46,7 @@ </argument> <description> Uses specified surface of given [Mesh] to populate data for MeshDataTool. - Requires [Mesh] with primitive type [code]PRIMITIVE_TRIANGLES[/code]. + Requires [Mesh] with primitive type [constant Mesh.PRIMITIVE_TRIANGLES]. </description> </method> <method name="get_edge_count" qualifiers="const"> @@ -139,8 +139,8 @@ <return type="int"> </return> <description> - Returns format of [Mesh]. Format is an integer made up of [Mesh] format flags combined together. For example, a mesh containing both vertices and normals would return a format of [code]3[/code] because [code]ARRAY_FORMAT_VERTEX[/code] is [code]1[/code] and [code]ARRAY_FORMAT_NORMAL[/code] is [code]2[/code]. - For list of format flags see [ArrayMesh]. + Returns format of [Mesh]. Format is an integer made up of [Mesh] format flags combined together. For example, a mesh containing both vertices and normals would return a format of [code]3[/code] because [constant ArrayMesh.ARRAY_FORMAT_VERTEX] is [code]1[/code] and [constant ArrayMesh.ARRAY_FORMAT_NORMAL] is [code]2[/code]. + For list of format flags see [enum ArrayMesh.ArrayFormat]. </description> </method> <method name="get_material" qualifiers="const"> diff --git a/doc/classes/MultiplayerAPI.xml b/doc/classes/MultiplayerAPI.xml index 7b5794bbfc..b67d83efec 100644 --- a/doc/classes/MultiplayerAPI.xml +++ b/doc/classes/MultiplayerAPI.xml @@ -152,19 +152,19 @@ Used with [method Node.rpc_config] or [method Node.rset_config] to set a method to be called or a property to be changed only on puppets for this node. Analogous to the [code]puppet[/code] keyword. Only accepts calls or property changes from the node's network master, see [method Node.set_network_master]. </constant> <constant name="RPC_MODE_SLAVE" value="3" enum="RPCMode"> - Deprecated. Use [code]RPC_MODE_PUPPET[/code] instead. Analogous to the [code]slave[/code] keyword. + Deprecated. Use [constant RPC_MODE_PUPPET] instead. Analogous to the [code]slave[/code] keyword. </constant> <constant name="RPC_MODE_REMOTESYNC" value="4" enum="RPCMode"> - Behave like [code]RPC_MODE_REMOTE[/code] but also make the call or property change locally. Analogous to the [code]remotesync[/code] keyword. + Behave like [constant RPC_MODE_REMOTE] but also make the call or property change locally. Analogous to the [code]remotesync[/code] keyword. </constant> <constant name="RPC_MODE_SYNC" value="4" enum="RPCMode"> - Deprecated. Use [code]RPC_MODE_REMOTESYNC[/code] instead. Analogous to the [code]sync[/code] keyword. + Deprecated. Use [constant RPC_MODE_REMOTESYNC] instead. Analogous to the [code]sync[/code] keyword. </constant> <constant name="RPC_MODE_MASTERSYNC" value="5" enum="RPCMode"> - Behave like [code]RPC_MODE_MASTER[/code] but also make the call or property change locally. Analogous to the [code]mastersync[/code] keyword. + Behave like [constant RPC_MODE_MASTER] but also make the call or property change locally. Analogous to the [code]mastersync[/code] keyword. </constant> <constant name="RPC_MODE_PUPPETSYNC" value="6" enum="RPCMode"> - Behave like [code]RPC_MODE_PUPPET[/code] but also make the call or property change locally. Analogous to the [code]puppetsync[/code] keyword. + Behave like [constant RPC_MODE_PUPPET] but also make the call or property change locally. Analogous to the [code]puppetsync[/code] keyword. </constant> </constants> </class> diff --git a/doc/classes/Mutex.xml b/doc/classes/Mutex.xml index 73c0a53f59..2f41e100fc 100644 --- a/doc/classes/Mutex.xml +++ b/doc/classes/Mutex.xml @@ -20,7 +20,7 @@ <return type="int" enum="Error"> </return> <description> - Try locking this [Mutex], does not block. Returns [code]OK[/code] on success, [code]ERR_BUSY[/code] otherwise. + Try locking this [Mutex], does not block. Returns [constant OK] on success, [constant ERR_BUSY] otherwise. </description> </method> <method name="unlock"> diff --git a/doc/classes/NetworkedMultiplayerPeer.xml b/doc/classes/NetworkedMultiplayerPeer.xml index e5cadb6ffe..ac84c32b5e 100644 --- a/doc/classes/NetworkedMultiplayerPeer.xml +++ b/doc/classes/NetworkedMultiplayerPeer.xml @@ -45,7 +45,7 @@ </argument> <description> Sets the peer to which packets will be sent. - The [code]id[/code] can be one of: [code]TARGET_PEER_BROADCAST[/code] to send to all connected peers, [code]TARGET_PEER_SERVER[/code] to send to the peer acting as server, a valid peer ID to send to that specific peer, a negative peer ID to send to all peers except that one. Default: [code]TARGET_PEER_BROADCAST[/code] + The [code]id[/code] can be one of: [constant TARGET_PEER_BROADCAST] to send to all connected peers, [constant TARGET_PEER_SERVER] to send to the peer acting as server, a valid peer ID to send to that specific peer, a negative peer ID to send to all peers except that one. Default: [constant TARGET_PEER_BROADCAST] </description> </method> </methods> @@ -90,10 +90,10 @@ </signals> <constants> <constant name="TRANSFER_MODE_UNRELIABLE" value="0" enum="TransferMode"> - Packets are not acknowledged, no resend attempts are made for lost packets. Packets may arrive in any order. Potentially faster than [code]TRANSFER_MODE_UNRELIABLE_ORDERED[/code]. Use for non-critical data, and always consider whether the order matters. + Packets are not acknowledged, no resend attempts are made for lost packets. Packets may arrive in any order. Potentially faster than [constant TRANSFER_MODE_UNRELIABLE_ORDERED]. Use for non-critical data, and always consider whether the order matters. </constant> <constant name="TRANSFER_MODE_UNRELIABLE_ORDERED" value="1" enum="TransferMode"> - Packets are not acknowledged, no resend attempts are made for lost packets. Packets are received in the order they were sent in. Potentially faster than [code]TRANSFER_MODE_RELIABLE[/code]. Use for non-critical data or data that would be outdated if received late due to resend attempt(s) anyway, for example movement and positional data. + Packets are not acknowledged, no resend attempts are made for lost packets. Packets are received in the order they were sent in. Potentially faster than [constant TRANSFER_MODE_RELIABLE]. Use for non-critical data or data that would be outdated if received late due to resend attempt(s) anyway, for example movement and positional data. </constant> <constant name="TRANSFER_MODE_RELIABLE" value="2" enum="TransferMode"> Packets must be received and resend attempts should be made until the packets are acknowledged. Packets must be received in the order they were sent in. Most reliable transfer mode, but potentially slowest due to the overhead. Use for critical data that must be transmitted and arrive in order, for example an ability being triggered or a chat message. Consider carefully if the information really is critical, and use sparingly. diff --git a/doc/classes/OccluderPolygon2D.xml b/doc/classes/OccluderPolygon2D.xml index f1d7d55cb9..a52d51fa7d 100644 --- a/doc/classes/OccluderPolygon2D.xml +++ b/doc/classes/OccluderPolygon2D.xml @@ -12,10 +12,10 @@ </methods> <members> <member name="closed" type="bool" setter="set_closed" getter="is_closed"> - If [code]true[/code], closes the polygon. A closed OccluderPolygon2D occludes the light coming from any direction. An opened OccluderPolygon2D occludes the light only at its outline's direction. Default value [code]true[/code]. + If [code]true[/code], closes the polygon. A closed OccluderPolygon2D occludes the light coming from any direction. An opened OccluderPolygon2D occludes the light only at its outline's direction. Default value: [code]true[/code]. </member> <member name="cull_mode" type="int" setter="set_cull_mode" getter="get_cull_mode" enum="OccluderPolygon2D.CullMode"> - Set the direction of the occlusion culling when not [code]CULL_DISABLED[/code]. Default value [code]DISABLED[/code]. + Set the direction of the occlusion culling or disable it. Default value: [constant CULL_DISABLED]. </member> <member name="polygon" type="PoolVector2Array" setter="set_polygon" getter="get_polygon"> A [Vector2] array with the index for polygon's vertices positions. Note that the returned value is a copy of the underlying array, rather than a reference. diff --git a/doc/classes/PackedScene.xml b/doc/classes/PackedScene.xml index 777e5221ed..7827571178 100644 --- a/doc/classes/PackedScene.xml +++ b/doc/classes/PackedScene.xml @@ -50,7 +50,7 @@ <argument index="0" name="edit_state" type="int" enum="PackedScene.GenEditState" default="0"> </argument> <description> - Instantiates the scene's node hierarchy. Triggers child scene instantiation(s). Triggers [Node]'s [code]NOTIFICATION_INSTANCED[/code] notification on the root node. + Instantiates the scene's node hierarchy. Triggers child scene instantiation(s). Triggers a [constant Node.NOTIFICATION_INSTANCED] notification on the root node. </description> </method> <method name="pack"> diff --git a/doc/classes/Particles.xml b/doc/classes/Particles.xml index a29b621406..d7e939ba31 100644 --- a/doc/classes/Particles.xml +++ b/doc/classes/Particles.xml @@ -31,7 +31,7 @@ Number of particles to emit. </member> <member name="draw_order" type="int" setter="set_draw_order" getter="get_draw_order" enum="Particles.DrawOrder"> - Particle draw order. Uses [code]DRAW_ORDER_*[/code] values. Default value: [code]DRAW_ORDER_INDEX[/code]. + Particle draw order. Uses [code]DRAW_ORDER_*[/code] values. Default value: [constant DRAW_ORDER_INDEX]. </member> <member name="draw_pass_1" type="Mesh" setter="set_draw_pass_mesh" getter="get_draw_pass_mesh"> [Mesh] that is drawn for the first draw pass. diff --git a/doc/classes/Particles2D.xml b/doc/classes/Particles2D.xml index 78114e985d..a874e8f6a0 100644 --- a/doc/classes/Particles2D.xml +++ b/doc/classes/Particles2D.xml @@ -31,7 +31,7 @@ Number of particles emitted in one emission cycle. </member> <member name="draw_order" type="int" setter="set_draw_order" getter="get_draw_order" enum="Particles2D.DrawOrder"> - Particle draw order. Uses [code]DRAW_ORDER_*[/code] values. Default value: [code]DRAW_ORDER_INDEX[/code]. + Particle draw order. Uses [code]DRAW_ORDER_*[/code] values. Default value: [constant DRAW_ORDER_INDEX]. </member> <member name="emitting" type="bool" setter="set_emitting" getter="is_emitting"> If [code]true[/code], particles are being emitted. Default value: [code]true[/code]. diff --git a/doc/classes/ParticlesMaterial.xml b/doc/classes/ParticlesMaterial.xml index cb06593bc2..00862e5672 100644 --- a/doc/classes/ParticlesMaterial.xml +++ b/doc/classes/ParticlesMaterial.xml @@ -67,25 +67,25 @@ Damping randomness ratio. Default value: [code]0[/code]. </member> <member name="emission_box_extents" type="Vector3" setter="set_emission_box_extents" getter="get_emission_box_extents"> - The box's extents if [code]emission_shape[/code] is set to [code]EMISSION_SHAPE_BOX[/code]. + The box's extents if [code]emission_shape[/code] is set to [constant EMISSION_SHAPE_BOX]. </member> <member name="emission_color_texture" type="Texture" setter="set_emission_color_texture" getter="get_emission_color_texture"> Particle color will be modulated by color determined by sampling this texture at the same point as the [member emission_point_texture]. </member> <member name="emission_normal_texture" type="Texture" setter="set_emission_normal_texture" getter="get_emission_normal_texture"> - Particle velocity and rotation will be set by sampling this texture at the same point as the [member emission_point_texture]. Used only in [code]EMISSION_SHAPE_DIRECTED[/code]. Can be created automatically from mesh or node by selecting "Create Emission Points from Mesh/Node" under the "Particles" tool in the toolbar. + Particle velocity and rotation will be set by sampling this texture at the same point as the [member emission_point_texture]. Used only in [constant EMISSION_SHAPE_DIRECTED_POINTS]. Can be created automatically from mesh or node by selecting "Create Emission Points from Mesh/Node" under the "Particles" tool in the toolbar. </member> <member name="emission_point_count" type="int" setter="set_emission_point_count" getter="get_emission_point_count"> - The number of emission points if [code]emission_shape[/code] is set to [code]EMISSION_SHAPE_POINTS[/code] or [code]EMISSION_SHAPE_DIRECTED_POINTS[/code]. + The number of emission points if [code]emission_shape[/code] is set to [constant EMISSION_SHAPE_POINTS] or [constant EMISSION_SHAPE_DIRECTED_POINTS]. </member> <member name="emission_point_texture" type="Texture" setter="set_emission_point_texture" getter="get_emission_point_texture"> - Particles will be emitted at positions determined by sampling this texture at a random position. Used with [code]EMISSION_SHAPE_POINTS[/code] and [code]EMISSION_SHAPE_DIRECTED_POINTS[/code]. Can be created automatically from mesh or node by selecting "Create Emission Points from Mesh/Node" under the "Particles" tool in the toolbar. + Particles will be emitted at positions determined by sampling this texture at a random position. Used with [constant EMISSION_SHAPE_POINTS] and [constant EMISSION_SHAPE_DIRECTED_POINTS]. Can be created automatically from mesh or node by selecting "Create Emission Points from Mesh/Node" under the "Particles" tool in the toolbar. </member> <member name="emission_shape" type="int" setter="set_emission_shape" getter="get_emission_shape" enum="ParticlesMaterial.EmissionShape"> - Particles will be emitted inside this region. Use [code]EMISSION_SHAPE_*[/code] constants for values. Default value: [code]EMISSION_SHAPE_POINT[/code]. + Particles will be emitted inside this region. Use [code]EMISSION_SHAPE_*[/code] constants for values. Default value: [constant EMISSION_SHAPE_POINT]. </member> <member name="emission_sphere_radius" type="float" setter="set_emission_sphere_radius" getter="get_emission_sphere_radius"> - The sphere's radius if [code]emission_shape[/code] is set to [code]EMISSION_SHAPE_SPHERE[/code]. + The sphere's radius if [code]emission_shape[/code] is set to [constant EMISSION_SHAPE_SPHERE]. </member> <member name="flag_align_y" type="bool" setter="set_flag" getter="get_flag"> Align y-axis of particle with the direction of its velocity. diff --git a/doc/classes/RichTextLabel.xml b/doc/classes/RichTextLabel.xml index c8dd7821a3..a097e2076f 100644 --- a/doc/classes/RichTextLabel.xml +++ b/doc/classes/RichTextLabel.xml @@ -35,7 +35,7 @@ <argument index="0" name="bbcode" type="String"> </argument> <description> - Parses [code]bbcode[/code] and adds tags to the tag stack as needed. Returns the result of the parsing, [code]OK[/code] if successful. + Parses [code]bbcode[/code] and adds tags to the tag stack as needed. Returns the result of the parsing, [constant OK] if successful. </description> </method> <method name="clear"> @@ -93,7 +93,7 @@ <argument index="0" name="bbcode" type="String"> </argument> <description> - The assignment version of [method append_bbcode]. Clears the tag stack and inserts the new content. Returns [code]OK[/code] if parses [code]bbcode[/code] successfully. + The assignment version of [method append_bbcode]. Clears the tag stack and inserts the new content. Returns [constant OK] if parses [code]bbcode[/code] successfully. </description> </method> <method name="pop"> diff --git a/doc/classes/RigidBody2D.xml b/doc/classes/RigidBody2D.xml index 9a1802b515..3fdc367cc5 100644 --- a/doc/classes/RigidBody2D.xml +++ b/doc/classes/RigidBody2D.xml @@ -138,8 +138,8 @@ The maximum number of contacts to report. Default value: [code]0[/code]. </member> <member name="continuous_cd" type="int" setter="set_continuous_collision_detection_mode" getter="get_continuous_collision_detection_mode" enum="RigidBody2D.CCDMode"> - Continuous collision detection mode. Default value: [code]CCD_MODE_DISABLED[/code]. - Continuous collision detection tries to predict where a moving body will collide instead of moving it and correcting its movement after collision. Continuous collision detection is slower, but more precise and misses fewer collisions with small, fast-moving objects. Raycasting and shapecasting methods are available. See [code]CCD_MODE_[/code] constants for details. + Continuous collision detection mode. Default value: [constant CCD_MODE_DISABLED]. + Continuous collision detection tries to predict where a moving body will collide instead of moving it and correcting its movement after collision. Continuous collision detection is slower, but more precise and misses fewer collisions with small, fast-moving objects. Raycasting and shapecasting methods are available. See [enum CCDMode] for details. </member> <member name="custom_integrator" type="bool" setter="set_use_custom_integrator" getter="is_using_custom_integrator"> If [code]true[/code], internal force integration is disabled for this body. Aside from collision response, the body will only move as determined by the [method _integrate_forces] function. @@ -163,7 +163,7 @@ The body's mass. Default value: [code]1[/code]. </member> <member name="mode" type="int" setter="set_mode" getter="get_mode" enum="RigidBody2D.Mode"> - The body's mode. See [code]MODE_*[/code] constants. Default value: [code]MODE_RIGID[/code]. + The body's mode. See [code]MODE_*[/code] constants. Default value: [constant MODE_RIGID]. </member> <member name="physics_material_override" type="PhysicsMaterial" setter="set_physics_material_override" getter="get_physics_material_override"> </member> @@ -229,7 +229,7 @@ Static mode. The body behaves like a [StaticBody2D] and does not move. </constant> <constant name="MODE_CHARACTER" value="2" enum="Mode"> - Character mode. Similar to [code]MODE_RIGID[/code], but the body can not rotate. + Character mode. Similar to [constant MODE_RIGID], but the body can not rotate. </constant> <constant name="MODE_KINEMATIC" value="3" enum="Mode"> Kinematic mode. The body behaves like a [KinematicBody2D], and must be moved by code. diff --git a/doc/classes/Semaphore.xml b/doc/classes/Semaphore.xml index dadb445d4b..412913807d 100644 --- a/doc/classes/Semaphore.xml +++ b/doc/classes/Semaphore.xml @@ -13,14 +13,14 @@ <return type="int" enum="Error"> </return> <description> - Lowers the [Semaphore], allowing one more thread in. Returns [code]OK[/code] on success, [code]ERR_BUSY[/code] otherwise. + Lowers the [Semaphore], allowing one more thread in. Returns [constant OK] on success, [constant ERR_BUSY] otherwise. </description> </method> <method name="wait"> <return type="int" enum="Error"> </return> <description> - Tries to wait for the [Semaphore], if its value is zero, blocks until non-zero. Returns [code]OK[/code] on success, [code]ERR_BUSY[/code] otherwise. + Tries to wait for the [Semaphore], if its value is zero, blocks until non-zero. Returns [constant OK] on success, [constant ERR_BUSY] otherwise. </description> </method> </methods> diff --git a/doc/classes/Shader.xml b/doc/classes/Shader.xml index 668fb6bafa..b14351ee28 100644 --- a/doc/classes/Shader.xml +++ b/doc/classes/Shader.xml @@ -22,7 +22,7 @@ <return type="int" enum="Shader.Mode"> </return> <description> - Returns the shader mode for the shader, either [code]MODE_CANVAS_ITEM[/code], [code]MODE_SPATIAL[/code] or [code]MODE_PARTICLES[/code] + Returns the shader mode for the shader, either [constant MODE_CANVAS_ITEM], [constant MODE_SPATIAL] or [constant MODE_PARTICLES] </description> </method> <method name="has_param" qualifiers="const"> diff --git a/doc/classes/Spatial.xml b/doc/classes/Spatial.xml index 9d1761ba9f..f4c0134471 100644 --- a/doc/classes/Spatial.xml +++ b/doc/classes/Spatial.xml @@ -329,7 +329,7 @@ <constants> <constant name="NOTIFICATION_TRANSFORM_CHANGED" value="2000"> Spatial nodes receives this notification when their global transform changes. This means that either the current or a parent node changed its transform. - In order for [code]NOTIFICATION_TRANSFORM_CHANGED[/code] to work, users first need to ask for it, with [method set_notify_transform]. + In order for [constant NOTIFICATION_TRANSFORM_CHANGED] to work, users first need to ask for it, with [method set_notify_transform]. </constant> <constant name="NOTIFICATION_ENTER_WORLD" value="41"> Spatial nodes receives this notification when they are registered to new [World] resource. diff --git a/doc/classes/StreamPeerTCP.xml b/doc/classes/StreamPeerTCP.xml index e28fa3491e..49c6272606 100644 --- a/doc/classes/StreamPeerTCP.xml +++ b/doc/classes/StreamPeerTCP.xml @@ -17,7 +17,7 @@ <argument index="1" name="port" type="int"> </argument> <description> - Connect to the specified host:port pair. A hostname will be resolved if valid. Returns [code]OK[/code] on success or [code]FAILED[/code] on failure. + Connect to the specified host:port pair. A hostname will be resolved if valid. Returns [constant OK] on success or [constant FAILED] on failure. </description> </method> <method name="disconnect_from_host"> diff --git a/doc/classes/SurfaceTool.xml b/doc/classes/SurfaceTool.xml index e97f9995ee..ef8db3ca77 100644 --- a/doc/classes/SurfaceTool.xml +++ b/doc/classes/SurfaceTool.xml @@ -90,7 +90,7 @@ </argument> <description> Insert a triangle fan made of array data into [Mesh] being constructed. - Requires primitive type be set to [code]PRIMITIVE_TRIANGLES[/code]. + Requires primitive type be set to [constant Mesh.PRIMITIVE_TRIANGLES]. </description> </method> <method name="add_uv"> @@ -148,7 +148,7 @@ <argument index="0" name="primitive" type="int" enum="Mesh.PrimitiveType"> </argument> <description> - Called before adding any Vertices. Takes the primitive type as an argument (e.g. Mesh.PRIMITIVE_TRIANGLES). + Called before adding any Vertices. Takes the primitive type as an argument (e.g. [constant Mesh.PRIMITIVE_TRIANGLES]). </description> </method> <method name="clear"> @@ -212,8 +212,8 @@ </argument> <description> Generates normals from Vertices so you do not have to do it manually. - Setting "flip" [code]true[/code] inverts resulting normals. - Requires primitive type to be set to [code]PRIMITIVE_TRIANGLES[/code]. + Setting [code]flip[/code] to [code]true[/code] inverts the resulting normals. + Requires primitive type to be set to [constant Mesh.PRIMITIVE_TRIANGLES]. </description> </method> <method name="generate_tangents"> diff --git a/doc/classes/TextureProgress.xml b/doc/classes/TextureProgress.xml index ae306c6862..3bbc05dfe7 100644 --- a/doc/classes/TextureProgress.xml +++ b/doc/classes/TextureProgress.xml @@ -18,14 +18,14 @@ If [code]true[/code], Godot treats the bar's textures like [NinePatchRect]. Use [code]stretch_margin_*[/code], like [member stretch_margin_bottom], to set up the nine patch's 3x3 grid. Default value: [code]false[/code]. </member> <member name="radial_center_offset" type="Vector2" setter="set_radial_center_offset" getter="get_radial_center_offset"> - Offsets [member texture_progress] if [member fill_mode] is [code]FILL_CLOCKWISE[/code] or [code]FILL_COUNTER_CLOCKWISE[/code]. + Offsets [member texture_progress] if [member fill_mode] is [constant FILL_CLOCKWISE] or [constant FILL_COUNTER_CLOCKWISE]. </member> <member name="radial_fill_degrees" type="float" setter="set_fill_degrees" getter="get_fill_degrees"> - Upper limit for the fill of [member texture_progress] if [member fill_mode] is [code]FILL_CLOCKWISE[/code] or [code]FILL_COUNTER_CLOCKWISE[/code]. When the node's [code]value[/code] is equal to its [code]max_value[/code], the texture fills up to this angle. + Upper limit for the fill of [member texture_progress] if [member fill_mode] is [constant FILL_CLOCKWISE] or [constant FILL_COUNTER_CLOCKWISE]. When the node's [code]value[/code] is equal to its [code]max_value[/code], the texture fills up to this angle. See [member Range.value], [member Range.max_value]. </member> <member name="radial_initial_angle" type="float" setter="set_radial_initial_angle" getter="get_radial_initial_angle"> - Starting angle for the fill of [member texture_progress] if [member fill_mode] is [code]FILL_CLOCKWISE[/code] or [code]FILL_COUNTER_CLOCKWISE[/code]. When the node's [code]value[/code] is equal to its [code]min_value[/code], the texture doesn't show up at all. When the [code]value[/code] increases, the texture fills and tends towards [member radial_fill_degrees]. + Starting angle for the fill of [member texture_progress] if [member fill_mode] is [constant FILL_CLOCKWISE] or [constant FILL_COUNTER_CLOCKWISE]. When the node's [code]value[/code] is equal to its [code]min_value[/code], the texture doesn't show up at all. When the [code]value[/code] increases, the texture fills and tends towards [member radial_fill_degrees]. </member> <member name="stretch_margin_bottom" type="int" setter="set_stretch_margin" getter="get_stretch_margin"> The height of the 9-patch's bottom row. A margin of 16 means the 9-slice's bottom corners and side will have a height of 16 pixels. You can set all 4 margin values individually to create panels with non-uniform borders. diff --git a/doc/classes/TextureRect.xml b/doc/classes/TextureRect.xml index 829105d561..b0b786a722 100644 --- a/doc/classes/TextureRect.xml +++ b/doc/classes/TextureRect.xml @@ -29,7 +29,7 @@ </members> <constants> <constant name="STRETCH_SCALE_ON_EXPAND" value="0" enum="StretchMode"> - Scale to fit the node's bounding rectangle, only if [code]expand[/code] is [code]true[/code]. Default [code]stretch_mode[/code], for backwards compatibility. Until you set [code]expand[/code] to [code]true[/code], the texture will behave like [code]STRETCH_KEEP[/code]. + Scale to fit the node's bounding rectangle, only if [code]expand[/code] is [code]true[/code]. Default [code]stretch_mode[/code], for backwards compatibility. Until you set [code]expand[/code] to [code]true[/code], the texture will behave like [constant STRETCH_KEEP]. </constant> <constant name="STRETCH_SCALE" value="1" enum="StretchMode"> Scale to fit the node's bounding rectangle. diff --git a/doc/classes/Tree.xml b/doc/classes/Tree.xml index 0272efeecb..aa287b1ed0 100644 --- a/doc/classes/Tree.xml +++ b/doc/classes/Tree.xml @@ -92,7 +92,7 @@ <argument index="0" name="position" type="Vector2"> </argument> <description> - If [member drop_mode_flags] includes [code]DROP_MODE_INBETWEEN[/code], returns -1 if [code]position[/code] is the upper part of a tree item at that position, 1 for the lower part, and additionally 0 for the middle part if [member drop_mode_flags] includes [code]DROP_MODE_ON_ITEM[/code]. + If [member drop_mode_flags] includes [constant DROP_MODE_INBETWEEN], returns -1 if [code]position[/code] is the upper part of a tree item at that position, 1 for the lower part, and additionally 0 for the middle part if [member drop_mode_flags] includes [constant DROP_MODE_ON_ITEM]. Otherwise, returns 0. If there are no tree item at [code]position[/code], returns -100. </description> </method> @@ -228,7 +228,7 @@ The amount of columns. </member> <member name="drop_mode_flags" type="int" setter="set_drop_mode_flags" getter="get_drop_mode_flags"> - The drop mode as an OR combination of flags. See [code]DROP_MODE_*[/code] constants. Once dropping is done, reverts to [code]DROP_MODE_DISABLED[/code]. Setting this during [method Control.can_drop_data] is recommended. + The drop mode as an OR combination of flags. See [code]DROP_MODE_*[/code] constants. Once dropping is done, reverts to [constant DROP_MODE_DISABLED]. Setting this during [method Control.can_drop_data] is recommended. </member> <member name="hide_folding" type="bool" setter="set_hide_folding" getter="is_folding_hidden"> If [code]true[/code], the folding arrow is hidden. @@ -268,7 +268,7 @@ <argument index="0" name="arrow_clicked" type="bool"> </argument> <description> - Emitted when a cell with the [code]CELL_MODE_CUSTOM[/code] is clicked to be edited. + Emitted when a cell with the [constant TreeItem.CELL_MODE_CUSTOM] is clicked to be edited. </description> </signal> <signal name="empty_rmb"> @@ -335,7 +335,7 @@ <argument index="2" name="selected" type="bool"> </argument> <description> - Emitted instead of [code]item_selected[/code] when [code]select_mode[/code] is [code]SELECT_MULTI[/code]. + Emitted instead of [code]item_selected[/code] when [code]select_mode[/code] is [constant SELECT_MULTI]. </description> </signal> <signal name="nothing_selected"> diff --git a/doc/classes/Tween.xml b/doc/classes/Tween.xml index d121fdc125..ff1413cb94 100644 --- a/doc/classes/Tween.xml +++ b/doc/classes/Tween.xml @@ -14,7 +14,7 @@ tween.start() [/codeblock] Many methods require a property name, such as "position" above. You can find the correct property name by hovering over the property in the Inspector. You can also provide the components of a property directly by using "property:component" (eg. [code]position:x[/code]), where it would only apply to that particular component. - Many of the methods accept [code]trans_type[/code] and [code]ease_type[/code]. The first accepts an [enum TransitionType] constant, and refers to the way the timing of the animation is handled (see [code]http://easings.net/[/code] for some examples). The second accepts an [enum EaseType] constant, and controls the where [code]trans_type[/code] is applied to the interpolation (in the beginning, the end, or both). If you don't know which transition and easing to pick, you can try different [enum TransitionType] constants with [code]EASE_IN_OUT[/code], and use the one that looks best. + Many of the methods accept [code]trans_type[/code] and [code]ease_type[/code]. The first accepts an [enum TransitionType] constant, and refers to the way the timing of the animation is handled (see [code]http://easings.net/[/code] for some examples). The second accepts an [enum EaseType] constant, and controls the where [code]trans_type[/code] is applied to the interpolation (in the beginning, the end, or both). If you don't know which transition and easing to pick, you can try different [enum TransitionType] constants with [constant EASE_IN_OUT], and use the one that looks best. </description> <tutorials> </tutorials> diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index de3cdbbe13..caaaf662dc 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -222,7 +222,7 @@ The canvas transform of the viewport, useful for changing the on-screen positions of all child [CanvasItem]s. This is relative to the global canvas transform of the viewport. </member> <member name="debug_draw" type="int" setter="set_debug_draw" getter="get_debug_draw" enum="Viewport.DebugDraw"> - The overlay mode for test rendered geometry in debug purposes. Default value: [code]DEBUG_DRAW_DISABLED[/code]. + The overlay mode for test rendered geometry in debug purposes. Default value: [constant DEBUG_DRAW_DISABLED]. </member> <member name="disable_3d" type="bool" setter="set_disable_3d" getter="is_3d_disabled"> If [code]true[/code], the viewport will disable 3D rendering. For actual disabling use [code]usage[/code]. Default value: [code]false[/code]. @@ -245,7 +245,7 @@ If [code]true[/code], the result after 3D rendering will not have a linear to sRGB color conversion applied. This is important when the viewport is used as a render target where the result is used as a texture on a 3D object rendered in another viewport. It is also important if the viewport is used to create data that is not color based (noise, heightmaps, pickmaps, etc.). Do not enable this when the viewport is used as a texture on a 2D object or if the viewport is your final output. </member> <member name="msaa" type="int" setter="set_msaa" getter="get_msaa" enum="Viewport.MSAA"> - The multisample anti-aliasing mode. Default value: [code]MSAA_DISABLED[/code]. + The multisample anti-aliasing mode. Default value: [constant MSAA_DISABLED]. </member> <member name="own_world" type="bool" setter="set_use_own_world" getter="is_using_own_world"> If [code]true[/code], the viewport will use [World] defined in [code]world[/code] property. Default value: [code]false[/code]. @@ -257,10 +257,10 @@ If [code]true[/code], renders the Viewport directly to the screen instead of to the root viewport. Only available in GLES2. This is a low-level optimization and should not be used in most cases. If used, reading from the Viewport or from [code]SCREEN_TEXTURE[/code] becomes unavailable. For more information see [method VisualServer.viewport_set_render_direct_to_screen]. Default value: [code]false[/code]. </member> <member name="render_target_clear_mode" type="int" setter="set_clear_mode" getter="get_clear_mode" enum="Viewport.ClearMode"> - The clear mode when viewport used as a render target. Default value: [code]CLEAR_MODE_ALWAYS[/code]. + The clear mode when viewport used as a render target. Default value: [constant CLEAR_MODE_ALWAYS]. </member> <member name="render_target_update_mode" type="int" setter="set_update_mode" getter="get_update_mode" enum="Viewport.UpdateMode"> - The update mode when viewport used as a render target. Default value: [code]UPDATE_WHEN_VISIBLE[/code]. + The update mode when viewport used as a render target. Default value: [constant UPDATE_WHEN_VISIBLE]. </member> <member name="render_target_v_flip" type="bool" setter="set_vflip" getter="get_vflip"> If [code]true[/code], the result of rendering will be flipped vertically. Default value: [code]false[/code]. @@ -308,7 +308,7 @@ Do not update the render target. </constant> <constant name="UPDATE_ONCE" value="1" enum="UpdateMode"> - Update the render target once, then switch to [code]UPDATE_DISABLED[/code]. + Update the render target once, then switch to [constant UPDATE_DISABLED]. </constant> <constant name="UPDATE_WHEN_VISIBLE" value="2" enum="UpdateMode"> Update the render target only when it is visible. This is the default value. @@ -392,7 +392,7 @@ Never clear the render target. </constant> <constant name="CLEAR_MODE_ONLY_NEXT_FRAME" value="2" enum="ClearMode"> - Clear the render target next frame, then switch to [code]CLEAR_MODE_NEVER[/code]. + Clear the render target next frame, then switch to [constant CLEAR_MODE_NEVER]. </constant> </constants> </class> diff --git a/doc/classes/VisualServer.xml b/doc/classes/VisualServer.xml index 552aba14ac..565d8b3ae0 100644 --- a/doc/classes/VisualServer.xml +++ b/doc/classes/VisualServer.xml @@ -4221,7 +4221,7 @@ The viewport is never cleared before drawing. </constant> <constant name="VIEWPORT_CLEAR_ONLY_NEXT_FRAME" value="2" enum="ViewportClearMode"> - The viewport is cleared once, then the clear mode is set to [code]VIEWPORT_CLEAR_NEVER[/code]. + The viewport is cleared once, then the clear mode is set to [constant VIEWPORT_CLEAR_NEVER]. </constant> <constant name="VIEWPORT_MSAA_DISABLED" value="0" enum="ViewportMSAA"> Multisample antialiasing is disabled. diff --git a/doc/classes/XMLParser.xml b/doc/classes/XMLParser.xml index a11e95db79..55dfb5d489 100644 --- a/doc/classes/XMLParser.xml +++ b/doc/classes/XMLParser.xml @@ -70,7 +70,7 @@ <return type="String"> </return> <description> - Get the name of the current element node. This will raise an error if the current node type is not [code]NODE_ELEMENT[/code] nor [code]NODE_ELEMENT_END[/code] + Get the name of the current element node. This will raise an error if the current node type is not [constant NODE_ELEMENT] nor [constant NODE_ELEMENT_END] </description> </method> <method name="get_node_offset" qualifiers="const"> diff --git a/modules/enet/doc_classes/NetworkedMultiplayerENet.xml b/modules/enet/doc_classes/NetworkedMultiplayerENet.xml index d3d1e58b7b..187e8d349d 100644 --- a/modules/enet/doc_classes/NetworkedMultiplayerENet.xml +++ b/modules/enet/doc_classes/NetworkedMultiplayerENet.xml @@ -34,7 +34,7 @@ <argument index="4" name="client_port" type="int" default="0"> </argument> <description> - Create client that connects to a server at [code]address[/code] using specified [code]port[/code]. The given address needs to be either a fully qualified domain name (e.g. [code]www.example.com[/code]) or an IP address in IPv4 or IPv6 format (e.g. [code]192.168.1.1[/code]). The [code]port[/code] is the port the server is listening on. The [code]in_bandwidth[/code] and [code]out_bandwidth[/code] parameters can be used to limit the incoming and outgoing bandwidth to the given number of bytes per second. The default of 0 means unlimited bandwidth. Note that ENet will strategically drop packets on specific sides of a connection between peers to ensure the peer's bandwidth is not overwhelmed. The bandwidth parameters also determine the window size of a connection which limits the amount of reliable packets that may be in transit at any given time. Returns [code]OK[/code] if a client was created, [code]ERR_ALREADY_IN_USE[/code] if this NetworkedMultiplayerEnet instance already has an open connection (in which case you need to call [method close_connection] first) or [code]ERR_CANT_CREATE[/code] if the client could not be created. If [code]client_port[/code] is specified, the client will also listen to the given port, this is useful in some NAT traversal technique. + Create client that connects to a server at [code]address[/code] using specified [code]port[/code]. The given address needs to be either a fully qualified domain name (e.g. [code]www.example.com[/code]) or an IP address in IPv4 or IPv6 format (e.g. [code]192.168.1.1[/code]). The [code]port[/code] is the port the server is listening on. The [code]in_bandwidth[/code] and [code]out_bandwidth[/code] parameters can be used to limit the incoming and outgoing bandwidth to the given number of bytes per second. The default of 0 means unlimited bandwidth. Note that ENet will strategically drop packets on specific sides of a connection between peers to ensure the peer's bandwidth is not overwhelmed. The bandwidth parameters also determine the window size of a connection which limits the amount of reliable packets that may be in transit at any given time. Returns [constant OK] if a client was created, [constant ERR_ALREADY_IN_USE] if this NetworkedMultiplayerEnet instance already has an open connection (in which case you need to call [method close_connection] first) or [constant ERR_CANT_CREATE] if the client could not be created. If [code]client_port[/code] is specified, the client will also listen to the given port, this is useful in some NAT traversal technique. </description> </method> <method name="create_server"> @@ -49,7 +49,7 @@ <argument index="3" name="out_bandwidth" type="int" default="0"> </argument> <description> - Create server that listens to connections via [code]port[/code]. The port needs to be an available, unused port between 0 and 65535. Note that ports below 1024 are privileged and may require elevated permissions depending on the platform. To change the interface the server listens on, use [method set_bind_ip]. The default IP is the wildcard [code]*[/code], which listens on all available interfaces. [code]max_clients[/code] is the maximum number of clients that are allowed at once, any number up to 4096 may be used, although the achievable number of simultaneous clients may be far lower and depends on the application. For additional details on the bandwidth parameters, see [method create_client]. Returns [code]OK[/code] if a server was created, [code]ERR_ALREADY_IN_USE[/code] if this NetworkedMultiplayerEnet instance already has an open connection (in which case you need to call [method close_connection] first) or [code]ERR_CANT_CREATE[/code] if the server could not be created. + Create server that listens to connections via [code]port[/code]. The port needs to be an available, unused port between 0 and 65535. Note that ports below 1024 are privileged and may require elevated permissions depending on the platform. To change the interface the server listens on, use [method set_bind_ip]. The default IP is the wildcard [code]*[/code], which listens on all available interfaces. [code]max_clients[/code] is the maximum number of clients that are allowed at once, any number up to 4096 may be used, although the achievable number of simultaneous clients may be far lower and depends on the application. For additional details on the bandwidth parameters, see [method create_client]. Returns [constant OK] if a server was created, [constant ERR_ALREADY_IN_USE] if this NetworkedMultiplayerEnet instance already has an open connection (in which case you need to call [method close_connection] first) or [constant ERR_CANT_CREATE] if the server could not be created. </description> </method> <method name="disconnect_peer"> @@ -107,7 +107,7 @@ </methods> <members> <member name="always_ordered" type="bool" setter="set_always_ordered" getter="is_always_ordered"> - Always use [code]TRANSFER_MODE_ORDERED[/code] in place of [code]TRANSFER_MODE_UNRELIABLE[/code]. This is the only way to use ordering with the RPC system. + Enforce ordered packets when using [constant NetworkedMultiplayerPeer.TRANSFER_MODE_UNRELIABLE] (thus behaving similarly to [constant NetworkedMultiplayerPeer.TRANSFER_MODE_UNRELIABLE_ORDERED]). This is the only way to use ordering with the RPC system. </member> <member name="channel_count" type="int" setter="set_channel_count" getter="get_channel_count"> The number of channels to be used by ENet. Default: [code]3[/code]. Channels are used to separate different kinds of data. In reliable or ordered mode, for example, the packet delivery order is ensured on a per channel basis. diff --git a/modules/upnp/doc_classes/UPNP.xml b/modules/upnp/doc_classes/UPNP.xml index 0516ea9d54..6530fd614e 100644 --- a/modules/upnp/doc_classes/UPNP.xml +++ b/modules/upnp/doc_classes/UPNP.xml @@ -171,7 +171,7 @@ No port maps are available. May also be returned if port mapping functionality is not available. </constant> <constant name="UPNP_RESULT_CONFLICT_WITH_OTHER_MECHANISM" value="12" enum="UPNPResult"> - Conflict with other mechanism. May be returned instead of [code]UPNP_RESULT_CONFLICT_WITH_OTHER_MAPPING[/code] if a port mapping conflicts with an existing one. + Conflict with other mechanism. May be returned instead of [constant UPNP_RESULT_CONFLICT_WITH_OTHER_MAPPING] if a port mapping conflicts with an existing one. </constant> <constant name="UPNP_RESULT_CONFLICT_WITH_OTHER_MAPPING" value="13" enum="UPNPResult"> Conflict with an existing port mapping. diff --git a/modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml b/modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml index ea6ba7cf43..b88d2890e1 100644 --- a/modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml +++ b/modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml @@ -194,19 +194,19 @@ Serialize a [Variant] to a string. </constant> <constant name="STR_TO_VAR" value="60" enum="BuiltinFunc"> - Deserialize a [Variant] from a string serialized using [code]VAR_TO_STR[/code]. + Deserialize a [Variant] from a string serialized using [constant VAR_TO_STR]. </constant> <constant name="VAR_TO_BYTES" value="61" enum="BuiltinFunc"> Serialize a [Variant] to a [PoolByteArray]. </constant> <constant name="BYTES_TO_VAR" value="62" enum="BuiltinFunc"> - Deserialize a [Variant] from a [PoolByteArray] serialized using [code]VAR_TO_BYTES[/code]. + Deserialize a [Variant] from a [PoolByteArray] serialized using [constant VAR_TO_BYTES]. </constant> <constant name="COLORN" value="63" enum="BuiltinFunc"> Return the [Color] with the given name and alpha ranging from 0 to 1. Note: names are defined in color_names.inc. </constant> <constant name="MATH_SMOOTHSTEP" value="64" enum="BuiltinFunc"> - Return a number smoothly interpolated between the first two inputs, based on the third input. Similar to [code]MATH_LERP[/code], but interpolates faster at the beginning and slower at the end. Using Hermite interpolation formula: + Return a number smoothly interpolated between the first two inputs, based on the third input. Similar to [constant MATH_LERP], but interpolates faster at the beginning and slower at the end. Using Hermite interpolation formula: [codeblock] var t = clamp((weight - from) / (to - from), 0.0, 1.0) return t * t * (3.0 - 2.0 * t) diff --git a/modules/visual_script/doc_classes/VisualScriptCustomNode.xml b/modules/visual_script/doc_classes/VisualScriptCustomNode.xml index 1ab9f807fb..cd3a663e81 100644 --- a/modules/visual_script/doc_classes/VisualScriptCustomNode.xml +++ b/modules/visual_script/doc_classes/VisualScriptCustomNode.xml @@ -125,7 +125,7 @@ Execute the custom node's logic, returning the index of the output sequence port to use or a [String] when there is an error. The [code]inputs[/code] array contains the values of the input ports. [code]outputs[/code] is an array whose indices should be set to the respective outputs. - The [code]start_mode[/code] is usually [code]START_MODE_BEGIN_SEQUENCE[/code], unless you have used the STEP_* constants. + The [code]start_mode[/code] is usually [constant START_MODE_BEGIN_SEQUENCE], unless you have used the STEP_* constants. [code]working_mem[/code] is an array which can be used to persist information between runs of the custom node. When returning, you can mask the returned value with one of the STEP_* constants. </description> diff --git a/modules/webrtc/doc_classes/WebRTCPeerConnection.xml b/modules/webrtc/doc_classes/WebRTCPeerConnection.xml index ae709877f4..4c2938d0db 100644 --- a/modules/webrtc/doc_classes/WebRTCPeerConnection.xml +++ b/modules/webrtc/doc_classes/WebRTCPeerConnection.xml @@ -7,7 +7,7 @@ A WebRTC connection between the local computer and a remote peer. Provides an interface to connect, maintain and monitor the connection. Setting up a WebRTC connection between two peers from now on) may not seem a trivial task, but it can be broken down into 3 main steps: - The peer that wants to initiate the connection ([code]A[/code] from now on) creates an offer and send it to the other peer ([code]B[/code] from now on). - - [code]B[/code] receives the offer, generate and answer, and sends it to [code]B[/code]). + - [code]B[/code] receives the offer, generate and answer, and sends it to [code]A[/code]). - [code]A[/code] and [code]B[/code] then generates and exchange ICE candidates with each other. After these steps, the connection should become connected. Keep on reading or look into the tutorial for more information. </description> @@ -68,7 +68,7 @@ </return> <description> Creates a new SDP offer to start a WebRTC connection with a remote peer. At least one [WebRTCDataChannel] must have been created before calling this method. - If this functions returns [code]OK[/code], [signal session_description_created] will be called when the session is ready to be sent. + If this functions returns [constant OK], [signal session_description_created] will be called when the session is ready to be sent. </description> </method> <method name="get_connection_state" qualifiers="const"> diff --git a/modules/websocket/doc_classes/WebSocketServer.xml b/modules/websocket/doc_classes/WebSocketServer.xml index 51945d410a..5c4647b1ce 100644 --- a/modules/websocket/doc_classes/WebSocketServer.xml +++ b/modules/websocket/doc_classes/WebSocketServer.xml @@ -71,7 +71,7 @@ Start listening on the given port. You can specify the desired subprotocols via the "protocols" array. If the list empty (default), "binary" will be used. If [code]true[/code] is passed as [code]gd_mp_api[/code], the server will behave like a network peer for the [MultiplayerAPI], connections from non Godot clients will not work, and [signal data_received] will not be emitted. - If [code]false[/code] is passed instead (default), you must call [PacketPeer] functions ([code]put_packet[/code], [code]get_packet[/code], etc.), on the [WebSocketPeer] returned via [code]get_peer(ID)[/code] to communicate with the peer with given [code]ID[/code] (e.g. [code]get_peer(ID).get_available_packet_count[/code]). + If [code]false[/code] is passed instead (default), you must call [PacketPeer] functions ([code]put_packet[/code], [code]get_packet[/code], etc.), on the [WebSocketPeer] returned via [code]get_peer(id)[/code] to communicate with the peer with given [code]id[/code] (e.g. [code]get_peer(id).get_available_packet_count[/code]). </description> </method> <method name="stop"> |