110 files changed, 53750 insertions, 14756 deletions

diff --git a/.github/workflows/web_builds.yml b/.github/workflows/web_builds.yml
index b3fb87ed7e..deee91938d 100644
--- a/.github/workflows/web_builds.yml
+++ b/.github/workflows/web_builds.yml
@@ -6,7 +6,7 @@ env:
   # Only used for the cache key. Increment version to force clean build.
   GODOT_BASE_BRANCH: master
   SCONSFLAGS: verbose=yes warnings=extra werror=yes debug_symbols=no
-  EM_VERSION: 3.1.20
+  EM_VERSION: 3.1.18
   EM_CACHE_FOLDER: "emsdk-cache"
 
 concurrency:
diff --git a/doc/translations/ar.po b/doc/translations/ar.po
index 43e62ecab2..bc3fa60d84 100644
--- a/doc/translations/ar.po
+++ b/doc/translations/ar.po
@@ -693,8 +693,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -704,7 +705,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -758,7 +760,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -770,7 +773,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1191,10 +1195,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -5013,19 +5022,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5046,21 +5057,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5070,9 +5085,10 @@ msgstr "يُرجع قيمة ظل الزاوية للمَعلم."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5724,9 +5740,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5900,8 +5916,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8903,8 +8919,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8955,10 +8972,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9201,12 +9228,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9752,7 +9773,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9913,12 +9939,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10066,6 +10096,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10206,7 +10251,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11886,7 +11934,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11979,7 +12027,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12007,9 +12057,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12509,13 +12559,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12541,8 +12592,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12855,12 +12908,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12905,8 +12958,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12954,8 +13009,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13017,7 +13075,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13142,7 +13200,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16138,7 +16199,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18869,7 +18932,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19018,16 +19083,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19173,18 +19239,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "يُرجع قيمة الجيب العكسية للمَعلم."
@@ -24099,8 +24153,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24721,7 +24779,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26309,10 +26369,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27721,8 +27784,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30024,11 +30087,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30874,7 +30940,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30886,6 +30956,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33246,14 +33326,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33261,22 +33341,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "يُرجع جيب المَعلم."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "يُرجع جيب المَعلم."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "يُرجع جيب المَعلم."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "يُرجع جيب المَعلم."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -34853,9 +34937,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35316,7 +35400,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36453,7 +36539,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37279,13 +37365,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40955,7 +41053,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46342,7 +46442,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "يُرجع جيب المَعلم."
 
 #: doc/classes/PopupMenu.xml
@@ -46581,7 +46683,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47311,7 +47415,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49992,8 +50100,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54012,7 +54131,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54156,13 +54277,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55352,7 +55479,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55971,6 +56101,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56305,7 +56443,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57738,7 +57878,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59005,6 +59145,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59066,6 +59209,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59088,7 +59234,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60225,6 +60374,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "يُرجع جيب المَعلم."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60255,6 +60409,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "يُرجع جيب المَعلم."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60296,7 +60455,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65177,21 +65338,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65204,7 +65369,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65233,7 +65398,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65243,22 +65440,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65271,8 +65481,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65470,16 +65682,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74136,7 +74348,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/ca.po b/doc/translations/ca.po
index 2fce9a4d08..7c687eaf1a 100644
--- a/doc/translations/ca.po
+++ b/doc/translations/ca.po
@@ -653,8 +653,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -664,7 +665,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -718,7 +720,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -730,7 +733,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1145,10 +1149,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4959,19 +4968,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4992,21 +5003,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5015,9 +5030,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5669,9 +5685,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5845,8 +5861,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8848,8 +8864,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8900,10 +8917,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9145,12 +9172,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9696,7 +9717,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9857,12 +9883,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10010,6 +10040,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10150,7 +10195,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11828,7 +11876,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11921,7 +11969,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11949,9 +11999,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12448,13 +12498,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12480,8 +12531,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12794,12 +12847,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12844,8 +12897,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12893,8 +12948,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12956,7 +13014,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13081,7 +13139,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16077,7 +16138,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18802,7 +18865,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18951,16 +19016,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19105,18 +19171,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -24023,8 +24077,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24644,7 +24702,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26228,10 +26288,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27638,8 +27701,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29939,11 +30002,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30788,7 +30854,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30800,6 +30870,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33157,14 +33237,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33172,21 +33252,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34763,9 +34843,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35224,7 +35304,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36336,7 +36418,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37151,13 +37233,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40821,7 +40915,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46185,7 +46281,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46424,7 +46522,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47153,7 +47253,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49834,8 +49938,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53852,7 +53967,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53996,13 +54113,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55192,7 +55315,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55811,6 +55937,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56145,7 +56279,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57578,7 +57714,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58843,6 +58979,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58904,6 +59043,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58926,7 +59068,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60063,6 +60208,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60092,6 +60241,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60133,7 +60286,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64998,21 +65153,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65025,7 +65184,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65054,7 +65213,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65064,22 +65255,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65092,8 +65296,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65291,16 +65497,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73930,7 +74136,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/classes.pot b/doc/translations/classes.pot
index b8187d24d5..f8e32bbc21 100644
--- a/doc/translations/classes.pot
+++ b/doc/translations/classes.pot
@@ -533,8 +533,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -544,7 +545,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -598,7 +600,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -610,7 +613,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1025,10 +1029,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4839,19 +4848,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4872,21 +4883,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4895,9 +4910,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5549,9 +5565,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5725,8 +5741,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8728,8 +8744,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8780,10 +8797,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9025,12 +9052,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9576,7 +9597,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9737,12 +9763,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9890,6 +9920,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10030,7 +10075,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11708,7 +11756,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11801,7 +11849,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11829,9 +11879,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12328,13 +12378,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12360,8 +12411,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12674,12 +12727,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12724,8 +12777,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12773,8 +12828,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12836,7 +12894,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12961,7 +13019,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15957,7 +16018,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18682,7 +18745,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18831,16 +18896,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -18985,18 +19051,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23900,8 +23954,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24521,7 +24579,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26105,10 +26165,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27515,8 +27578,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29816,11 +29879,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30665,7 +30731,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30677,6 +30747,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33034,14 +33114,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33049,21 +33129,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34640,9 +34720,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35101,7 +35181,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36213,7 +36295,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37028,13 +37110,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40698,7 +40792,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46062,7 +46158,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46301,7 +46399,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47030,7 +47130,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49711,8 +49815,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53729,7 +53844,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53873,13 +53990,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55069,7 +55192,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55688,6 +55814,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56022,7 +56156,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57455,7 +57591,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58720,6 +58856,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58781,6 +58920,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58803,7 +58945,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59940,6 +60085,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59969,6 +60118,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60010,7 +60163,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64875,21 +65030,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64902,7 +65061,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64931,7 +65090,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64941,22 +65132,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64969,8 +65173,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65168,16 +65374,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73807,7 +74013,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/cs.po b/doc/translations/cs.po
index 878b7e9aae..50eb59aa1c 100644
--- a/doc/translations/cs.po
+++ b/doc/translations/cs.po
@@ -14,12 +14,13 @@
 # DomcaSuzi <dominio122@gmail.com>, 2021.
 # Tomas Dostal <tomas.dostal.cz@gmail.com>, 2021.
 # JoeMoos <josephmoose13@gmail.com>, 2022.
+# Mirinek <mirek.nozicka77@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-03-17 13:59+0000\n"
-"Last-Translator: JoeMoos <josephmoose13@gmail.com>\n"
+"PO-Revision-Date: 2022-08-28 00:17+0000\n"
+"Last-Translator: Mirinek <mirek.nozicka77@gmail.com>\n"
 "Language-Team: Czech <https://hosted.weblate.org/projects/godot-engine/godot-"
 "class-reference/cs/>\n"
 "Language: cs\n"
@@ -27,7 +28,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Weblate 4.12-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -92,15 +93,16 @@ msgstr "Výchozí"
 
 #: doc/tools/make_rst.py
 msgid "Setter"
-msgstr ""
+msgstr "Setter"
 
 #: doc/tools/make_rst.py
 msgid "value"
 msgstr "hodnota"
 
 #: doc/tools/make_rst.py
+#, fuzzy
 msgid "Getter"
-msgstr ""
+msgstr "Getter"
 
 #: doc/tools/make_rst.py
 msgid ""
@@ -789,8 +791,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -800,7 +803,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -875,7 +879,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -887,7 +892,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Lineární interpolace mezi dvěma hodnotami normalizovanou hodnout. Toto je "
 "opak [method inverse_lerp].\n"
@@ -1478,16 +1484,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Mapuje [code]hodnotu[/code] z rozsahu [code][istart, istop][/code] na [code]"
-"[ostart, ostop][/code].\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Vrací 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 #, fuzzy
@@ -5345,19 +5351,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5378,21 +5386,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5402,9 +5414,10 @@ msgstr "Vrátí tangens parametru."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6056,9 +6069,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6232,8 +6245,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -9238,8 +9251,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9290,10 +9304,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9539,12 +9563,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -10090,7 +10108,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10251,12 +10274,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10407,6 +10434,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10547,7 +10589,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12228,7 +12273,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12321,7 +12366,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12349,9 +12396,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12854,13 +12901,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12886,8 +12934,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13200,12 +13250,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13250,8 +13300,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13299,8 +13351,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13362,7 +13417,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13487,7 +13542,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16489,7 +16547,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19244,7 +19304,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19393,16 +19455,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19548,18 +19611,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Vrátí arkus sinus parametru."
@@ -24481,8 +24532,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -25103,7 +25158,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26691,10 +26748,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -28108,8 +28168,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30412,11 +30472,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31265,7 +31328,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31277,6 +31344,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33640,14 +33717,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33655,22 +33732,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Vrátí sinus parametru."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Vrací [code]true[/code] pokud [code]s[/code] je nula nebo téměř nula."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Vrací [code]true[/code] pokud [code]s[/code] je nula nebo téměř nula."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Vrací [code]true[/code] pokud [code]s[/code] je nula nebo téměř nula."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -35249,9 +35330,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35712,7 +35793,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36853,7 +36936,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37682,13 +37765,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41362,7 +41457,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46761,7 +46858,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Vrací [code]true[/code] pokud [code]s[/code] je nula nebo téměř nula."
 
 #: doc/classes/PopupMenu.xml
@@ -47000,7 +47099,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47730,7 +47831,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -50411,8 +50516,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54438,7 +54554,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54583,13 +54701,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55779,7 +55903,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -56399,6 +56526,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56733,7 +56868,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -58167,7 +58304,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59440,6 +59577,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59501,6 +59641,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59523,7 +59666,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60661,6 +60807,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Vrací [code]true[/code] pokud [code]s[/code] je nula nebo téměř nula."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60691,6 +60842,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Vrací [code]true[/code] pokud [code]s[/code] je nula nebo téměř nula."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60732,7 +60888,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65646,21 +65804,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65673,7 +65835,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65702,7 +65864,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65712,22 +65906,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65740,8 +65947,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65939,16 +66148,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74620,7 +74829,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/de.po b/doc/translations/de.po
index 0cf8d9ae17..868315c7fe 100644
--- a/doc/translations/de.po
+++ b/doc/translations/de.po
@@ -48,12 +48,16 @@
 # Christian Packenius <christian@packenius.com>, 2022.
 # Hannes Petersen <01zustrom.baklava@icloud.com>, 2022.
 # Hans Peter <figefi6308@runqx.com>, 2022.
+# Tim <sakul8826@gmail.com>, 2022.
+# Anonynonymouse <tom.spaine60388@gmail.com>, 2022.
+# Felix Bitsch <felix.a.bitsch@gmail.com>, 2022.
+# Coxcopi <master.vogel2015@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-07-23 03:56+0000\n"
-"Last-Translator: Hans Peter <figefi6308@runqx.com>\n"
+"PO-Revision-Date: 2022-09-04 02:43+0000\n"
+"Last-Translator: Coxcopi <master.vogel2015@gmail.com>\n"
 "Language-Team: German <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/de/>\n"
 "Language: de\n"
@@ -61,7 +65,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -89,7 +93,7 @@ msgstr "Signale"
 
 #: doc/tools/make_rst.py
 msgid "Enumerations"
-msgstr "Aufzählungstypen"
+msgstr "Aufzählungen"
 
 #: doc/tools/make_rst.py
 msgid "Constants"
@@ -563,7 +567,7 @@ msgstr ""
 "- Für [code]Dictionary[/code]s, prüft [code]==[/code] nur, ob es dasselbe "
 "Objekt ist .\n"
 "- Für [code]Array[/code]s, [code]==[/code] werden die Arrays elementweise "
-"mit  [code]==[/code] verglichen. Der Elemente-Vergleich ist also wieder "
+"mit [code]==[/code] verglichen. Der Elemente-Vergleich ist also wieder "
 "einfach, nicht tief.\n"
 "Zusammengefasst, immer wenn möglicherweise ein [code]Dictionary[/code] "
 "involviert ist und du einen echten Inhaltsvergleich brauchst, verwende "
@@ -859,6 +863,7 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Returns an interpolation or extrapolation factor considering the range "
 "specified in [code]from[/code] and [code]to[/code], and the interpolated "
@@ -866,8 +871,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -877,7 +883,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "Gibt zurück einen Inter- bzw. Extrapolationsfaktor unter Berücksichtigung "
 "des Zahlenraums von [code]from[/code] bis [code]to[/code], und dem "
@@ -968,12 +975,14 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Linearly interpolates between two values by the factor defined in "
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -985,7 +994,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Interpoliert linear zwischen zwei Werten mit dem in [code]weight[/code] "
 "definierten Faktor. Um eine Interpolation durchzuführen, sollte "
@@ -1721,16 +1731,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Bildet den Wert [code]value[/code] von einem Zahlenbereich [code]istart, "
-"istop[/code] auf einen anderen [code]ostart, ostop[/code] ab.\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Ergibt 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -4091,18 +4101,27 @@ msgid ""
 "MIDI system exclusive message. This has behavior exclusive to the device "
 "you're receiving input from. Getting this data is not implemented in Godot."
 msgstr ""
+"MIDI-System-exklusive Nachricht. Dieses Verhalten gilt nur für das Gerät, "
+"von dem Sie Eingaben empfangen. Das Abrufen dieser Daten ist in Godot nicht "
+"implementiert."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
 "MIDI quarter frame message. Contains timing information that is used to "
 "synchronize MIDI devices. Getting this data is not implemented in Godot."
 msgstr ""
+"MIDI-Viertel-Frame-Meldung. Enthält Zeitinformationen, die zur "
+"Synchronisierung von MIDI-Geräten verwendet werden. Das Abrufen dieser Daten "
+"ist in Godot nicht implementiert."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
 "MIDI song position pointer message. Gives the number of 16th notes since the "
 "start of the song. Getting this data is not implemented in Godot."
 msgstr ""
+"MIDI-Songpositionszeiger-Meldung. Gibt die Anzahl der 16tel-Noten seit "
+"Beginn des Liedes an. Das Abrufen dieser Daten ist in Godot nicht "
+"implementiert."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
@@ -4118,6 +4137,8 @@ msgid ""
 "MIDI tune request message. Upon receiving a tune request, all analog "
 "synthesizers should tune their oscillators."
 msgstr ""
+"MIDI Tune Request Nachricht. Beim Empfang einer Tune-Anforderung sollten "
+"alle analogen Synthesizer ihre Oszillatoren stimmen."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
@@ -4150,6 +4171,8 @@ msgid ""
 "MIDI active sensing message. This message is intended to be sent repeatedly "
 "to tell the receiver that a connection is alive."
 msgstr ""
+"MIDI active sensing message. Diese Meldung soll wiederholt gesendet werden, "
+"um dem Empfänger mitzuteilen, dass eine Verbindung besteht."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
@@ -4436,6 +4459,15 @@ msgid ""
 "specified by appending [code]:integer[/code] to the name, e.g. [code]\"Zero,"
 "One,Three:3,Four,Six:6\"[/code]."
 msgstr ""
+"Weist darauf hin, dass eine Integer-, Float- oder String-Eigenschaft ein "
+"Aufzählungswert ist, der in einer über eine Hinweiszeichenfolge angegebenen "
+"Liste auszuwählen ist.\n"
+"Die Hinweiszeichenkette ist eine durch Kommata getrennte Liste von Namen wie "
+"z. B. [code]\"Hallo,Etwas,Sonst\"[/code]. Bei Integer- und Float-"
+"Eigenschaften hat der erste Name in der Liste den Wert 0, der nächste den "
+"Wert 1 und so weiter. Explizite Werte können auch durch Anhängen von [code]:"
+"integer[/code] an den Namen angegeben werden, z. B. [code]\"Null,Eins,Drei:3,"
+"Vier,Sechs:6\"[/code]."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
@@ -4445,6 +4477,12 @@ msgid ""
 "arbitrary values and can be empty. The list of values serves to suggest "
 "possible values."
 msgstr ""
+"weist darauf hin, dass eine Zeichenketteneigenschaft ein Aufzählungswert "
+"sein kann, der aus einer Liste ausgewählt werden kann, die über eine "
+"Hinweiszeichenfolge wie [code]\"Hallo,Etwas,Sonst\"[/code]\n"
+"m Gegensatz zu [constant PROPERTY_HINT_ENUM] akzeptiert eine Eigenschaft mit "
+"diesem Hinweis weiterhin beliebige Werte und kann leer sein. Die Liste der "
+"Werte dient dazu, mögliche Werte vorzuschlagen."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
@@ -4998,6 +5036,16 @@ msgid ""
 "var box2 = box.expand(Vector3(0, -1, 2))\n"
 "[/codeblock]"
 msgstr ""
+"Gibt eine Kopie dieses [AABB] zurück, erweitert um einen bestimmten Punkt "
+"einzuschließen.\n"
+"[b]Beispiel:[/b]\n"
+"[codeblock]\n"
+"# Position (-3, 2, 0), Größe (1, 1, 1)\n"
+"var box = AABB(Vector3(-3, 2, 0), Vector3(1, 1, 1))\n"
+"# Position (-3, -1, 0), Größe (3, 4, 2), so dass wir sowohl das "
+"ursprüngliche AABB als auch Vector3(0, -1, 2) unterbringen\n"
+"var box2 = box.expand(Vector3(0, -1, 2))\n"
+"[/codeblock]"
 
 #: doc/classes/AABB.xml
 msgid "Returns the volume of the [AABB]."
@@ -5193,6 +5241,11 @@ msgid ""
 "may cause a crash. If you wish to hide it or any of its children, use their "
 "[member CanvasItem.visible] property."
 msgstr ""
+"Gibt die für den eingebauten Text verwendete Bezeichnung zurück.\n"
+"[b]Warnung:[/b] Dies ist ein erforderlicher interner Knoten; das Entfernen "
+"und Freigeben dieses Knotens kann zu einem Absturz führen. Wenn Sie ihn oder "
+"eines seiner Kinder ausblenden möchten, verwenden Sie deren Eigenschaft "
+"[member CanvasItem.visible]."
 
 #: doc/classes/AcceptDialog.xml
 msgid ""
@@ -5201,6 +5254,11 @@ msgid ""
 "may cause a crash. If you wish to hide it or any of its children, use their "
 "[member CanvasItem.visible] property."
 msgstr ""
+"Gibt die OK [Button]-Instanz zurück.\n"
+"[b]Warnung:[/b] Dies ist ein erforderlicher interner Knoten; das Entfernen "
+"und Freigeben dieses Knotens kann zu einem Absturz führen. Wenn Sie ihn oder "
+"eines seiner Kinder ausblenden möchten, verwenden Sie deren Eigenschaft "
+"[member CanvasItem.visible]."
 
 #: doc/classes/AcceptDialog.xml
 msgid ""
@@ -5218,6 +5276,12 @@ msgid ""
 "the [code]button[/code] will no longer emit this dialog's [signal "
 "custom_action] signal or cancel this dialog."
 msgstr ""
+"Entfernt den [code]button[/code] aus dem Dialog. Gibt den [code]button[/"
+"code] NICHT frei. Der [code]button[/code] muss ein [Button] sein, der mit "
+"der [method add_button] oder [method add_cancel] Methode hinzugefügt wurde. "
+"Nach dem Entfernen wird das Drücken des [code]button[/code] nicht mehr das "
+"[signal custom_action]-Signal dieses Dialogs auslösen oder diesen Dialog "
+"abbrechen."
 
 #: doc/classes/AcceptDialog.xml
 msgid "Sets autowrapping for the text in the dialog."
@@ -5433,6 +5497,18 @@ msgid ""
 "code] will make it so the [code]run[/code] animation uses normal and "
 "specular maps."
 msgstr ""
+"[AnimatedSprite] ähnelt dem [Sprite]-Knoten, außer dass er mehrere Texturen "
+"als Animationsrahmen enthält. Animationen werden mit einer [SpriteFrames]-"
+"Ressource erstellt, die es Ihnen ermöglicht, Bilddateien (oder einen Ordner "
+"mit diesen Dateien) zu importieren, um die Animationsrahmen für das Sprite "
+"bereitzustellen. Die [SpriteFrames]-Ressource kann im Editor über die untere "
+"Leiste SpriteFrames konfiguriert werden.\n"
+"[b]Hinweis:[/b] Du kannst eine Reihe von Normal- oder Specular-Maps "
+"zuordnen, indem du zusätzliche [SpriteFrames]-Ressourcen mit einem "
+"[code]_normal[/code] oder [code]_specular[/code] Suffix erstellst. Wenn du "
+"zum Beispiel 3 [SpriteFrames]-Ressourcen [code]run[/code], [code]run_normal[/"
+"code] und [code]run_specular[/code] hast, wird die [code]run[/code]-"
+"Animation normale und spekulare Maps verwenden."
 
 #: doc/classes/AnimatedSprite.xml doc/classes/AnimationPlayer.xml
 msgid "2D Sprite animation"
@@ -5498,6 +5574,9 @@ msgid ""
 "option to load, edit, clear, make unique and save the states of the "
 "[SpriteFrames] resource."
 msgstr ""
+"Die [SpriteFrames]-Ressource, die die Animation(en) enthält. Ermöglicht es "
+"Ihnen, die Zustände der [SpriteFrames]-Ressource zu laden, zu bearbeiten, zu "
+"löschen, eindeutig zu machen und zu speichern."
 
 #: doc/classes/AnimatedSprite.xml doc/classes/Sprite.xml
 #: doc/classes/SpriteBase3D.xml
@@ -6398,26 +6477,22 @@ msgstr ""
 "Knoten nicht zur Addition anzeigen."
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
-"Ruft die Textbeschriftung für diesen Knoten ab (wird von einigen Editoren "
-"verwendet)."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
-"Ruft einen untergeordneten Knoten nach Index ab (wird von Editoren "
-"verwendet, die von [AnimationRootNode] erben)."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
-"Ruft alle Kindknoten in der Reihenfolge als [code]Name: Knoten[/code]-"
-"Wörterbuch ab. Nur nützlich beim Erben von [AnimationRootNode]."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
@@ -6441,17 +6516,22 @@ msgstr ""
 "Bäumen wiederverwendet werden kann."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 "Ruft den Standardwert eines Parameters ab. Parameter sind benutzerdefinierte "
 "lokale Speicher, die für Ihre Knoten verwendet werden, da eine Ressource in "
 "mehreren Bäumen wiederverwendet werden kann."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
@@ -6461,9 +6541,11 @@ msgstr ""
 "ist ähnlich wie bei [method Object.get_property_list]."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 "Gibt [code]true[/code] zurück, ob der Mischbaum-Editor die Filterbearbeitung "
 "an diesem Node anzeigen soll."
@@ -6474,10 +6556,12 @@ msgid "Returns whether the given path is filtered."
 msgstr "Gibt [code]true[/code] zurück, ob ein gegebener Pfad gefiltert ist."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6633,7 +6717,7 @@ msgstr "AnimationTree"
 #: doc/classes/Quat.xml doc/classes/Skeleton.xml doc/classes/SpotLight.xml
 #: doc/classes/StaticBody.xml doc/classes/WorldEnvironment.xml
 msgid "Third Person Shooter Demo"
-msgstr ""
+msgstr "Third Person Shooter Demo"
 
 #: doc/classes/AnimationNodeAnimation.xml
 msgid "Input animation to use in an [AnimationNodeBlendTree]."
@@ -6659,7 +6743,7 @@ msgstr ""
 #: doc/classes/MeshInstance.xml doc/classes/MeshLibrary.xml
 #: doc/classes/ProjectSettings.xml doc/classes/Transform.xml
 msgid "3D Platformer Demo"
-msgstr ""
+msgstr "3D Platformer Demo"
 
 #: doc/classes/AnimationNodeAnimation.xml
 msgid ""
@@ -7332,9 +7416,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -7454,6 +7538,24 @@ msgid ""
 "animation_tree[\"parameters/Seek/seek_position\"] = 12.0\n"
 "[/codeblock]"
 msgstr ""
+"Dieser Knoten kann verwendet werden, um einen Suchbefehl für alle "
+"Unterkinder des Animationsgraphen auszuführen. Verwenden Sie diesen "
+"Knotentyp, um eine [Animation] ab dem Start oder einer bestimmten "
+"Abspielposition innerhalb des [AnimationNodeBlendTree] abzuspielen. Nach dem "
+"Einstellen der Zeit und dem Ändern der Animationswiedergabe geht der "
+"Suchknoten beim nächsten Prozessbild automatisch in den Schlafmodus, indem "
+"er seinen Wert [code]seek_position[/code] auf [code]-1.0[/code] setzt.\n"
+"[codeblock]\n"
+"# Kind-Animation von Anfang an abspielen.\n"
+"animation_tree.set(\"parameters/Seek/seek_position\", 0.0)\n"
+"# Alternativer Syntax (gleiches Ergebnis wie oben).\n"
+"animation_tree[\"parameters/Seek/seek_position\"] = 0.0\n"
+"\n"
+"# Kind-Animation ab dem 12 Sekunden Zeitstempel abspielen.\n"
+"animation_tree.set(\"parameters/Seek/seek_position\", 12.0)\n"
+"# Alternativer Syntax (gleiches Ergebnis wie oben).\n"
+"animation_tree[\"parameters/Seek/seek_position\"] = 12.0\n"
+"[/codeblock]"
 
 #: doc/classes/AnimationNodeTransition.xml
 msgid "A generic animation transition node for [AnimationTree]."
@@ -7570,9 +7672,10 @@ msgstr ""
 "Zeichenkette, wenn nicht gefunden."
 
 #: doc/classes/AnimationPlayer.xml
+#, fuzzy
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 "Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
 "code], wenn nicht gefunden."
@@ -7761,6 +7864,15 @@ msgid ""
 "get the currently playing animation, and internally for animation playback "
 "tracks. For more information, see [Animation]."
 msgstr ""
+"Der Name der aktuell abgespielten Animation. Wenn keine Animation abgespielt "
+"wird, ist der Wert der Eigenschaft eine leere Zeichenkette. Eine Änderung "
+"dieses Wertes führt nicht zum Neustart der Animation. Weitere Informationen "
+"über das Abspielen von Animationen finden Sie unter [method play].\n"
+"[b]Hinweis:[/b] Diese Eigenschaft wird zwar im Inspektor angezeigt, ist aber "
+"nicht zum Bearbeiten gedacht und wird nicht in der Szene gespeichert. Diese "
+"Eigenschaft wird hauptsächlich verwendet, um die aktuell abgespielte "
+"Animation zu erhalten, und intern für Animationswiedergabespuren. Für "
+"weitere Informationen, siehe [Animation]."
 
 #: doc/classes/AnimationPlayer.xml
 msgid "The length (in seconds) of the currently being played animation."
@@ -7814,6 +7926,13 @@ msgid ""
 "defined by the reset animation, if any, with the editor keeping the values "
 "that the nodes had before saving."
 msgstr ""
+"Dies wird vom Editor verwendet. Wenn es auf [code]true[/code] gesetzt wird, "
+"wird die Szene mit den Effekten der Reset-Animation gespeichert (als ob sie "
+"auf Zeit 0 gesucht worden wäre), und nach dem Speichern wieder "
+"zurückgesetzt.\n"
+"Mit anderen Worten, die gespeicherte Szenendatei enthält die \"Standard-"
+"Pose\", wie sie durch die Rücksetz-Animation definiert ist, und der Editor "
+"behält die Werte bei, die die Knoten vor dem Speichern hatten."
 
 #: doc/classes/AnimationPlayer.xml
 msgid "The node from which node path references will travel."
@@ -8073,6 +8192,8 @@ msgid ""
 "Binds a new [Animation] from the [member master_player] to the "
 "[AnimationTreePlayer]'s animation node with name [code]id[/code]."
 msgstr ""
+"Bindet eine neue [Animation] aus dem [member master_player] an den "
+"Animationsknoten des [AnimationTreePlayer] mit dem Namen [code]id[/code]."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -8080,12 +8201,18 @@ msgid ""
 "[code]id[/code] turns off the track modifying the property at [code]path[/"
 "code]. The modified node's children continue to animate."
 msgstr ""
+"Wenn [code]enable[/code] [code]true[/code] ist, schaltet der "
+"Animationsknoten mit der ID [code]id[/code] die Spur aus, die die "
+"Eigenschaft bei [code]path[/code] ändert. Die Kinder des geänderten Knotens "
+"werden weiterhin animiert."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
 "Binds the [Animation] named [code]source[/code] from [member master_player] "
 "to the animation node [code]id[/code]. Recalculates caches."
 msgstr ""
+"Bindet die [Animation] namens [code]source[/code] vom [member master_player] "
+"an den Animationsknoten [code]id[/code]. Berechnet die Caches neu."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8109,6 +8236,12 @@ msgid ""
 "At 0, output is input A. Towards 1, the influence of A gets lessened, the "
 "influence of B gets raised. At 1, output is input B."
 msgstr ""
+"Legt den Überblendungswert eines Blend2-Knotens mit seinem Namen und Wert "
+"fest.\n"
+"Ein Blend2-Knoten überblendet zwei Animationen (A und B) mit einem Wert "
+"zwischen 0 und 1.\n"
+"Bei 0 ist die Ausgabe die Eingabe A. In Richtung 1 wird der Einfluss von A "
+"verringert, der Einfluss von B erhöht. Bei 1 ist die Ausgabe die Eingabe B."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -8116,6 +8249,10 @@ msgid ""
 "[code]id[/code] turns off the track modifying the property at [code]path[/"
 "code]. The modified node's children continue to animate."
 msgstr ""
+"Wenn [code]enable[/code] [code]true[/code] ist, schaltet der Blend2-Knoten "
+"mit dem Namen [code]id[/code] die Spur aus, die die Eigenschaft bei "
+"[code]path[/code] ändert. Die Kinder des geänderten Knotens werden weiterhin "
+"animiert."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8132,6 +8269,15 @@ msgid ""
 "input A. From 0 to 1, the influence of A gets lessened, the influence of B+ "
 "gets raised and the influence of B+ is 0. At 1, output is input B+."
 msgstr ""
+"Legt den Überblendungsgrad eines Blend3-Knotens mit seinem Namen und Wert "
+"fest.\n"
+"Ein Blend3-Knoten überblendet drei Animationen (A, B-, B+) mit einem Wert "
+"zwischen -1 und 1.\n"
+"Bei -1 ist die Ausgabe die Eingabe B-. Von -1 bis 0 wird der Einfluss von B- "
+"verringert, der Einfluss von A wird erhöht und der Einfluss von B+ ist 0. "
+"Bei 0 ist die Ausgabe die Eingabe A. Von 0 bis 1 wird der Einfluss von A "
+"verringert, der Einfluss von B+ wird erhöht und der Einfluss von B+ ist 0. "
+"Bei 1 ist die Ausgabe die Eingabe B+."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8144,6 +8290,10 @@ msgid ""
 "A Blend4 Node blends two pairs of animations.\n"
 "The two pairs are blended like Blend2 and then added together."
 msgstr ""
+"Legt den Überblendungsgrad eines Blend4-Knotens mit seinem Namen und Wert "
+"fest.\n"
+"Ein Blend4-Knoten blendet zwei Paare von Animationen.\n"
+"Die beiden Paare werden wie Blend2 überblendet und dann addiert."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8160,7 +8310,7 @@ msgstr "Trennt das Node, der mit dem angegebenen Eingang verbunden ist."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Returns a [PoolStringArray] containing the name of all nodes."
-msgstr ""
+msgstr "Gibt ein [PoolStringArray] zurück, das die Namen aller Knoten enthält."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8172,16 +8322,22 @@ msgid ""
 "Sets the mix amount of a Mix node given its name and value.\n"
 "A Mix node adds input b to input a by the amount given by ratio."
 msgstr ""
+"Legt die Mischmenge eines Mix-Knotens fest, dessen Name und Wert angegeben "
+"ist.\n"
+"Ein Mix-Knoten fügt Eingang B zu Eingang A um den durch ratio angegebenen "
+"Betrag hinzu."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Check if a node exists (by name)."
-msgstr ""
+msgstr "Prüfen, ob ein Knoten existiert (nach Name)."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
 "Returns the input count for a given node. Different types of nodes have "
 "different amount of inputs."
 msgstr ""
+"Gibt die Anzahl der Eingaben für einen bestimmten Knoten zurück. "
+"Verschiedene Knotentypen haben eine unterschiedliche Anzahl von Eingängen."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8196,6 +8352,7 @@ msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Gets the node type, will return from [enum NodeType] enum."
 msgstr ""
+"Ruft den Knotentyp ab, wird von der Aufzählung [enum NodeType] zurückgegeben."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8243,28 +8400,38 @@ msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
 msgid ""
 "Sets the autorestart property of a OneShot node given its name and value."
 msgstr ""
+"Legt die Autorestart-Eigenschaft eines OneShot-Knotens mit dessen Namen und "
+"Wert fest."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
 "Sets the autorestart delay of a OneShot node given its name and value in "
 "seconds."
 msgstr ""
+"Legt die Autostart-Verzögerung eines OneShot-Knotens fest, wobei der Name "
+"und der Wert in Sekunden angegeben werden."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
 "Sets the autorestart random delay of a OneShot node given its name and value "
 "in seconds."
 msgstr ""
+"Legt die Zufallsverzögerung für den Autorestart eines OneShot-Knotens fest, "
+"wobei der Name und der Wert in Sekunden angegeben werden."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
 "Sets the fade in time of a OneShot node given its name and value in seconds."
 msgstr ""
+"Legt die Einblendzeit eines OneShot-Knotens mit seinem Namen und einem Wert "
+"in Sekunden fest."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
 "Sets the fade out time of a OneShot node given its name and value in seconds."
 msgstr ""
+"Legt die Ausblendzeit eines OneShot-Knotens fest, wobei der Name und der "
+"Wert in Sekunden angegeben werden."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -8272,6 +8439,9 @@ msgid ""
 "[code]id[/code] turns off the track modifying the property at [code]path[/"
 "code]. The modified node's children continue to animate."
 msgstr ""
+"Wenn [code]enable[/code] [code]true[/code] ist, schaltet der OneShot-Knoten "
+"mit der ID [code]id[/code] die Spur aus, die die Eigenschaft bei [code]path[/"
+"code] ändert. Die Kinder des geänderten Knotens werden weiterhin animiert"
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8289,6 +8459,9 @@ msgid ""
 "animation nodes. Needed when external sources modify the animation nodes' "
 "state."
 msgstr ""
+"Berechnet den Cache der von Animationsknoten erzeugten Spurinformationen "
+"manuell neu. Wird benötigt, wenn externe Quellen den Zustand der "
+"Animationsknoten ändern."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8297,7 +8470,7 @@ msgstr "Entfernt die Animation mit dem key [code]name[/code]."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Resets this [AnimationTreePlayer]."
-msgstr ""
+msgstr "Setzt diesen [AnimationTreePlayer] zurück."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8314,6 +8487,12 @@ msgid ""
 "If applied after a blend or mix, affects all input animations to that blend "
 "or mix."
 msgstr ""
+"Setzt die Zeitskala des TimeScale-Knotens mit dem Namen [code]id[/code] auf "
+"[code]scale[/code].\n"
+"Der TimeScale-Knoten wird verwendet, um [Animationen] zu beschleunigen, wenn "
+"die Skala über 1 liegt, oder sie zu verlangsamen, wenn sie unter 1 liegt.\n"
+"Wenn er nach einer Überblendung oder Mischung angewendet wird, wirkt er sich "
+"auf alle Eingangsanimationen für diese Überblendung oder Mischung aus."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -8322,6 +8501,10 @@ msgid ""
 "This functions as a seek in the [Animation] or the blend or mix of "
 "[Animation]s input in it."
 msgstr ""
+"Setzt den Zeitsuchwert des TimeSeek-Knotens mit dem Namen [code]id[/code] "
+"auf [code]seconds[/code].\n"
+"Dies funktioniert wie ein Suchlauf in der [Animation] oder der Mischung oder "
+"dem Mix von [Animation]en, die darin eingegeben werden."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8346,6 +8529,9 @@ msgid ""
 "Returns the number of inputs for the transition node with name [code]id[/"
 "code]. You can add inputs by right-clicking on the transition node."
 msgstr ""
+"Gibt die Anzahl der Eingänge für den Übergangsknoten mit dem Namen [code]id[/"
+"code] zurück. Sie können Eingaben hinzufügen, indem Sie mit der rechten "
+"Maustaste auf den Übergangsknoten klicken."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8360,6 +8546,9 @@ msgid ""
 "transition node with name [code]id[/code] is set to automatically advance to "
 "the next input upon completion."
 msgstr ""
+"Gibt [code]true[/code] zurück, wenn die Eingabe an [code]input_idx[/code] "
+"auf dem Übergangsknoten mit dem Namen [code]id[/code] so eingestellt ist, "
+"dass sie nach Abschluss automatisch zur nächsten Eingabe übergeht."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8375,12 +8564,17 @@ msgid ""
 "The transition node with name [code]id[/code] advances to its next input "
 "automatically when the input at [code]input_idx[/code] completes."
 msgstr ""
+"Der Übergangsknoten mit dem Namen [code]id[/code] geht automatisch zu seiner "
+"nächsten Eingabe über, wenn die Eingabe an [code]input_idx[/code] "
+"abgeschlossen ist."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
 "Resizes the number of inputs available for the transition node with name "
 "[code]id[/code]."
 msgstr ""
+"Verändert die Anzahl der verfügbaren Eingänge für den Übergangsknoten mit "
+"dem Namen [code]id[/code]."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8403,6 +8597,9 @@ msgid ""
 "It accesses the bones, so it should point to the same node the "
 "[AnimationPlayer] would point its Root Node at."
 msgstr ""
+"Der Knoten, von dem aus relativ auf andere Knoten zugegriffen werden kann.\n"
+"Er greift auf die Bones zu, sollte also auf denselben Knoten zeigen, auf den "
+"der [AnimationPlayer] seinen Root Knoten zeigen würde."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -8410,6 +8607,10 @@ msgid ""
 "binds animations to animation nodes.\n"
 "Once set, [Animation] nodes can be added to the [AnimationTreePlayer]."
 msgstr ""
+"Der Pfad zum [AnimationPlayer], von dem dieser [AnimationTreePlayer] "
+"Animationen an Animationsknoten bindet.\n"
+"Einmal festgelegt, können [Animation]-Knoten zum [AnimationTreePlayer] "
+"hinzugefügt werden."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8418,7 +8619,7 @@ msgstr "Die Prozessmeldung, in der die Animationen aktualisiert werden sollen."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Output node."
-msgstr ""
+msgstr "Ausgangsknoten."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8432,27 +8633,27 @@ msgstr "Einmaliger Timer."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Mix node."
-msgstr ""
+msgstr "Mischknoten."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Blend2 node."
-msgstr ""
+msgstr "Blend2 Knoten."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Blend3 node."
-msgstr ""
+msgstr "Blend3 Knoten."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Blend4 node."
-msgstr ""
+msgstr "Blend4 Knoten."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "TimeScale node."
-msgstr ""
+msgstr "TimeScale Knoten."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "TimeSeek node."
-msgstr ""
+msgstr "TimeSeek Knoten."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8478,7 +8679,7 @@ msgstr ""
 #: doc/classes/Area.xml doc/classes/QuadMesh.xml doc/classes/Viewport.xml
 #: doc/classes/ViewportTexture.xml
 msgid "GUI in 3D Demo"
-msgstr ""
+msgstr "Benutzeroberfläche in 3D-Demo"
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8645,10 +8846,15 @@ msgid ""
 "The degree to which this area applies reverb to its associated audio. Ranges "
 "from [code]0[/code] to [code]1[/code] with [code]0.1[/code] precision."
 msgstr ""
+"Der Grad, in dem dieser Bereich Hall auf das zugehörige Audiomaterial "
+"anwendet. Der Bereich reicht von [code]0[/code] bis [code]1[/code] mit einer "
+"Genauigkeit von [code]0.1[/code]."
 
 #: doc/classes/Area.xml
 msgid "If [code]true[/code], the area applies reverb to its associated audio."
 msgstr ""
+"Wenn [code]true[/code], wendet der Bereich Hall auf das zugehörige "
+"Audiomaterial an."
 
 #: doc/classes/Area.xml
 msgid "The reverb bus name to use for this area's associated audio."
@@ -8677,6 +8883,9 @@ msgid ""
 "be set to [code]true[/code].\n"
 "[code]area[/code] the other Area."
 msgstr ""
+"Wird ausgesendet, wenn ein anderer Bereich diesen Bereich betritt. "
+"Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt ist.\n"
+"[code]area[/code] der andere Bereich."
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8684,6 +8893,9 @@ msgid ""
 "be set to [code]true[/code].\n"
 "[code]area[/code] the other Area."
 msgstr ""
+"Wird ausgesendet, wenn ein anderer Bereich diesen Bereich verlässt. "
+"Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt ist.\n"
+"[code]area[/code] der andere Bereich."
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8699,6 +8911,18 @@ msgid ""
 "the [PhysicsServer]. Get the [CollisionShape] node with [code]self."
 "shape_owner_get_owner(local_shape_index)[/code]."
 msgstr ""
+"Wird ausgesendet, wenn [Shape]s eines anderen Bereichs in [Shape]s dieses "
+"Bereichs eintreten. Erfordert, dass [member monitoring] auf [code]true[/"
+"code] gesetzt ist.\n"
+"[code]area_rid[/code] die [RID] des vom [PhysicsServer] verwendeten "
+"[CollisionObject] des anderen Bereichs.\n"
+"[code]area[/code] die andere Area.\n"
+"[code]area_shape_index[/code] der Index des [Shape] des anderen Bereichs, "
+"der vom [PhysicsServer] verwendet wird. Holen Sie den [CollisionShape] "
+"Knoten mit [code]area.shape_owner_get_owner(area_shape_index)[/code].\n"
+"[code]local_shape_index[/code] der Index des [Shape] dieses Bereichs, der "
+"vom [PhysicsServer] verwendet wird. Holen Sie den [CollisionShape] Knoten "
+"mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8708,6 +8932,12 @@ msgid ""
 "[code]body[/code] the [Node], if it exists in the tree, of the other "
 "[PhysicsBody] or [GridMap]."
 msgstr ""
+"Wird ausgesendet, wenn ein [PhysicsBody] oder eine [GridMap] diesen Bereich "
+"betritt. Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt "
+"ist. [GridMap]s werden erkannt, wenn die [MeshLibrary] Kollisions-[Shape]s "
+"hat.\n"
+"[code]body[/code] die [Node] des anderen [PhysicsBody] oder der [GridMap], "
+"wenn er im Baum existiert."
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8717,6 +8947,12 @@ msgid ""
 "[code]body[/code] the [Node], if it exists in the tree, of the other "
 "[PhysicsBody] or [GridMap]."
 msgstr ""
+"Wird ausgesendet, wenn ein [PhysicsBody] oder eine [GridMap] diesen Bereich "
+"verlässt. Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt "
+"ist. [GridMap]s werden erkannt, wenn die [MeshLibrary] Kollisions-[Shape]s "
+"hat.\n"
+"[code]body[/code] der [Node], falls im Baum vorhanden, des anderen "
+"[PhysicsBody] oder der [GridMap]."
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8734,6 +8970,21 @@ msgid ""
 "the [PhysicsServer]. Get the [CollisionShape] node with [code]self."
 "shape_owner_get_owner(local_shape_index)[/code]."
 msgstr ""
+"Wird ausgesendet, wenn eine [Shape] eines [PhysicsBody] oder einer [GridMap] "
+"in eine [Shape] dieses Bereichs eintritt. Erfordert, dass [member "
+"monitoring] auf [code]true[/code] gesetzt ist. [GridMap]s werden erkannt, "
+"wenn die [MeshLibrary] Kollisions-[Shape]s hat.\n"
+"[code]body_rid[/code] die [RID] des [PhysicsBody]s oder [MeshLibrary]s "
+"[CollisionObject], das vom [PhysicsServer] verwendet wird.\n"
+"[code]body[/code] der [Node] des [PhysicsBody] oder der [GridMap], wenn er "
+"im Baum existiert.\n"
+"[code]body_shape_index[/code] der Index des [Shape]s des [PhysicsBody] oder "
+"der [GridMap], der vom [PhysicsServer] verwendet wird. Holen Sie den "
+"[CollisionShape] Knoten mit [code]body."
+"shape_owner_get_owner(body_shape_index)[/code].\n"
+"[code]local_shape_index[/code] der Index des [Shape]s dieses Bereichs, der "
+"vom [PhysicsServer] verwendet wird. Holen Sie den [CollisionShape] Knoten "
+"mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
 
 #: doc/classes/Area.xml doc/classes/Area2D.xml
 msgid "This area does not affect gravity/damping."
@@ -8744,24 +8995,34 @@ msgid ""
 "This area adds its gravity/damping values to whatever has been calculated so "
 "far (in [member priority] order)."
 msgstr ""
+"Dieser Bereich addiert seine Schwerkraft-/Dämpfungswerte zu den bisher "
+"berechneten Werten (in der Reihenfolge der [member priority])."
 
 #: doc/classes/Area.xml doc/classes/Area2D.xml
 msgid ""
 "This area adds its gravity/damping values to whatever has been calculated so "
 "far (in [member priority] order), ignoring any lower priority areas."
 msgstr ""
+"Dieser Bereich addiert seine Schwere-/Dämpfungswerte zu den bisher "
+"berechneten Werten (in der Reihenfolge der [member priority]) und ignoriert "
+"alle Bereiche mit niedrigerer Priorität."
 
 #: doc/classes/Area.xml doc/classes/Area2D.xml
 msgid ""
 "This area replaces any gravity/damping, even the defaults, ignoring any "
 "lower priority areas."
 msgstr ""
+"Dieser Bereich ersetzt jede Schwerkraft/Dämpfung, auch die Standardwerte, "
+"und ignoriert alle Bereiche mit niedrigerer Priorität."
 
 #: doc/classes/Area.xml doc/classes/Area2D.xml
 msgid ""
 "This area replaces any gravity/damping calculated so far (in [member "
 "priority] order), but keeps calculating the rest of the areas."
 msgstr ""
+"Dieser Bereich ersetzt alle bisher berechneten Schwerkraft-/Dämpfungswerte "
+"(in der Reihenfolge der [member priority]), berechnet aber weiterhin die "
+"übrigen Bereiche."
 
 #: doc/classes/Area2D.xml
 #, fuzzy
@@ -8786,13 +9047,13 @@ msgstr "Verwendung von Area2D"
 #: doc/classes/Area2D.xml doc/classes/CollisionShape2D.xml
 #: doc/classes/RectangleShape2D.xml
 msgid "2D Pong Demo"
-msgstr ""
+msgstr "2D Pong Demo"
 
 #: doc/classes/Area2D.xml doc/classes/Camera2D.xml
 #: doc/classes/KinematicBody2D.xml doc/classes/TileMap.xml
 #: doc/classes/TileSet.xml
 msgid "2D Platformer Demo"
-msgstr ""
+msgstr "2D Platformer Demo"
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8905,6 +9166,9 @@ msgid ""
 "to be set to [code]true[/code].\n"
 "[code]area[/code] the other Area2D."
 msgstr ""
+"Wird ausgesendet, wenn ein anderes Area2D dieses Area2D betritt. Erfordert, "
+"dass [member monitoring] auf [code]true[/code] gesetzt ist.\n"
+"[code]area[/code] die andere Area2D."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8912,6 +9176,9 @@ msgid ""
 "to be set to [code]true[/code].\n"
 "[code]area[/code] the other Area2D."
 msgstr ""
+"Wird ausgesendet, wenn ein anderes Area2D dieses Area2D verlässt. Erfordert, "
+"dass [member monitoring] auf [code]true[/code] gesetzt ist.\n"
+"[code]area[/code] die andere Area2D."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8927,6 +9194,18 @@ msgid ""
 "used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
 "[code]self.shape_owner_get_owner(local_shape_index)[/code]."
 msgstr ""
+"Wird ausgesendet, wenn [Shape2D]s eines anderen Area2Ds in [Shape2D]s dieses "
+"Area2Ds verlassen. Erfordert, dass [member monitoring] auf [code]true[/code] "
+"gesetzt ist.\n"
+"[code]area_rid[/code] die [RID] des anderen Area2D's [CollisionObject2D], "
+"das vom [Physics2DServer] verwendet wird.\n"
+"[code]area[/code] die andere Area2D.\n"
+"[code]area_shape_index[/code] der Index des [Shape2D]s des anderen Area2Ds, "
+"das vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
+"Knoten mit [code]area.shape_owner_get_owner(area_shape_index)[/code].\n"
+"[code]local_shape_index[/code] der Index des [Shape2D]s dieses Area2Ds, der "
+"vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
+"Knoten mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8942,6 +9221,18 @@ msgid ""
 "used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
 "[code]self.shape_owner_get_owner(local_shape_index)[/code]."
 msgstr ""
+"Wird ausgesendet, wenn [Shape2D]s eines anderen Area2Ds [Shape2D]s dieses "
+"Area2D verlassen. Erfordert, dass [member monitoring] auf [code]true[/code] "
+"gesetzt ist.\n"
+"[code]area_rid[/code] die [RID] des anderen Area2D's [CollisionObject2D], "
+"das vom [Physics2DServer] verwendet wird.\n"
+"[code]area[/code] die andere Area2D.\n"
+"[code]area_shape_index[/code] der Index des [Shape2D]s des anderen Area2Ds, "
+"das vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
+"Knoten mit [code]area.shape_owner_get_owner(area_shape_index)[/code].\n"
+"[code]local_shape_index[/code] der Index des [Shape2D]s dieses Area2Ds, der "
+"vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
+"Knoten mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8951,6 +9242,12 @@ msgid ""
 "[code]body[/code] the [Node], if it exists in the tree, of the other "
 "[PhysicsBody2D] or [TileMap]."
 msgstr ""
+"Wird ausgesendet, wenn ein [PhysicsBody2D] oder eine [TileMap] diesen Area2D "
+"betritt. Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt "
+"ist. [TileMap]s werden erkannt, wenn das [TileSet] Kollisions-[Shape2D]s "
+"hat.\n"
+"[code]body[/code] der [Node], falls im Baum vorhanden, des anderen "
+"[PhysicsBody2D] oder [TileMap]."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8960,6 +9257,12 @@ msgid ""
 "[code]body[/code] the [Node], if it exists in the tree, of the other "
 "[PhysicsBody2D] or [TileMap]."
 msgstr ""
+"Wird ausgesendet, wenn ein [PhysicsBody2D] oder eine [TileMap] diesen Area2D "
+"verlässt. Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt "
+"ist. [TileMap]s werden erkannt, wenn das [TileSet] Kollisions-[Shape2D]s "
+"hat.\n"
+"[code]body[/code] der [Node], falls im Baum vorhanden, des anderen "
+"[PhysicsBody2D] oder [TileMap]."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8979,6 +9282,21 @@ msgid ""
 "used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
 "[code]self.shape_owner_get_owner(local_shape_index)[/code]."
 msgstr ""
+"Wird ausgesendet, wenn eine der [Shape2D]s eines [PhysicsBody2D] oder einer "
+"[TileMap] in eine der [Shape2D]s dieser Area2D eintritt. Erfordert, dass "
+"[member monitoring] auf [code]true[/code] gesetzt ist. [TileMap]s werden "
+"erkannt, wenn das [TileSet] Kollisions-[Shape2D]s hat.\n"
+"[code]body_rid[/code] die [RID] des [PhysicsBody2D] oder [TileSet]'s "
+"[CollisionObject2D], das vom [Physics2DServer] verwendet wird.\n"
+"[code]body[/code] der [Node] des [PhysicsBody2D] oder der [TileMap], wenn er "
+"im Baum existiert.\n"
+"[code]body_shape_index[/code] der Index des [Shape2D]s des [PhysicsBody2D]s "
+"oder der [TileMap], der vom [Physics2DServer] verwendet wird. Holen Sie sich "
+"den [CollisionShape2D] Knoten mit [code]body."
+"shape_owner_get_owner(body_shape_index)[/code].\n"
+"[code]local_shape_index[/code] der Index des [Shape2D]s dieses Area2Ds, der "
+"vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
+"Knoten mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8998,10 +9316,25 @@ msgid ""
 "used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
 "[code]self.shape_owner_get_owner(local_shape_index)[/code]."
 msgstr ""
+"Wird ausgesendet, wenn eine der [Shape2D]s eines [PhysicsBody2D] oder einer "
+"[TileMap] eine der [Shape2D]s dieser Area2D verlässt. Erfordert, dass "
+"[member monitoring] auf [code]true[/code] gesetzt ist. [TileMap]s werden "
+"erkannt, wenn das [TileSet] Kollisions-[Shape2D]s hat.\n"
+"[code]body_rid[/code] die [RID] des [PhysicsBody2D] oder [TileSet]'s "
+"[CollisionObject2D], das vom [Physics2DServer] verwendet wird.\n"
+"[code]body[/code] der [Node] des [PhysicsBody2D] oder der [TileMap], wenn er "
+"im Baum existiert.\n"
+"[code]body_shape_index[/code] der Index des [Shape2D]s des [PhysicsBody2D]s "
+"oder der [TileMap], der vom [Physics2DServer] verwendet wird. Holen Sie sich "
+"den [CollisionShape2D] Knoten mit [code]body."
+"shape_owner_get_owner(body_shape_index)[/code].\n"
+"[code]local_shape_index[/code] der Index des [Shape2D]s dieses Area2Ds, der "
+"vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
+"Knoten mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
 
 #: doc/classes/Array.xml
 msgid "A generic array datatype."
-msgstr ""
+msgstr "Ein generischer Array Datentyp."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9035,6 +9368,37 @@ msgid ""
 "pushing/removing elements. Using [code]const[/code] will only prevent "
 "assigning the constant with another value after it was initialized."
 msgstr ""
+"Ein generisches Array, das mehrere Elemente beliebiger Typen enthalten kann, "
+"die über einen numerischen Index ab 0 zugänglich sind. Negative Indizes "
+"können verwendet werden, um von hinten zu zählen, wie in Python (-1 ist das "
+"letzte Element, -2 das vorletzte usw.).\n"
+"[b]Zum Beispiel:[/b]\n"
+"[codeblock]\n"
+"var array = [\"Eins\", 2, 3, \"Vier\"]\n"
+"print(array[0]) # Eins.\n"
+"print(array[2]) # 3.\n"
+"print(array[-1]) # Vier.\n"
+"array[2] = \"Drei\"\n"
+"print(array[-2]) # Drei.\n"
+"[/codeblock]\n"
+"Arrays können mit dem Operator [code]+[/code] verbunden werden:\n"
+"[codeblock]\n"
+"var array1 = [\"Eins\", 2]\n"
+"var array2 = [3, \"Vier\"]\n"
+"print(array1 + array2) # [\"Eins\", 2, 3, \"Vier\"]\n"
+"[/codeblock]\n"
+"[b]Hinweis:[/b] Die Verkettung mit dem Operator [code]+=[/code] erzeugt ein "
+"neues Array, was mit Kosten verbunden ist. Wenn Sie ein weiteres Array an "
+"ein bestehendes Array anhängen wollen, ist die [method append_array] "
+"effizienter.\n"
+"[b]Hinweis:[/b] Arrays werden immer per Referenz übergeben. Um eine Kopie "
+"eines Arrays zu erhalten, die unabhängig vom ursprünglichen Array verändert "
+"werden kann, verwenden Sie [method duplicate].\n"
+"[b]Hinweis:[/b] Wenn ein Array mit [code]const[/code] deklariert wird, kann "
+"das Array selbst immer noch verändert werden, indem die Werte an einzelnen "
+"Indizes definiert oder Elemente verschoben/entfernt werden. Die Verwendung "
+"von [code]const[/code] verhindert nur, dass der Konstante ein anderer Wert "
+"zugewiesen wird, nachdem sie initialisiert wurde."
 
 #: doc/classes/Array.xml
 #, fuzzy
@@ -9090,6 +9454,13 @@ msgid ""
 "print(array1) # Prints [1, 2, 3, 4, 5, 6].\n"
 "[/codeblock]"
 msgstr ""
+"Hängt ein weiteres Array an das Ende dieses Array an.\n"
+"[codeblock]\n"
+"var array1 = [1, 2, 3]\n"
+"var array2 = [4, 5, 6]\n"
+"array1.append_array(array2)\n"
+"print(array1) # Prints [1, 2, 3, 4, 5, 6].\n"
+"[/codeblock]"
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9099,6 +9470,12 @@ msgid ""
 "[/code]. If the array is empty, accessing by index will pause project "
 "execution when running from the editor."
 msgstr ""
+"Gibt das letzte Element des Arrays zurück. Gibt einen Fehler aus und liefert "
+"[code]null[/code], wenn das Array leer ist.\n"
+"[b]Hinweis:[/b] Der Aufruf dieser Funktion ist nicht dasselbe wie das "
+"Schreiben von [code]array[-1][/code]. Wenn das Array leer ist, führt der "
+"Zugriff über den Index zu einer Unterbrechung der Projektausführung, wenn es "
+"vom Editor aus ausgeführt wird."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9110,6 +9487,13 @@ msgid ""
 "[b]Note:[/b] Calling [method bsearch] on an unsorted array results in "
 "unexpected behavior."
 msgstr ""
+"Findet den Index eines vorhandenen Wertes (oder den Einfügeindex, der die "
+"Sortierreihenfolge beibehält, wenn der Wert noch nicht im Array vorhanden "
+"ist) mithilfe der binären Suche. Optional kann ein [code]before[/code]-"
+"Spezifizierer übergeben werden. Falls [code]false[/code], kommt der "
+"zurückgegebene Index nach allen vorhandenen Einträgen des Wertes im Array.\n"
+"[b]Hinweis:[/b] Der Aufruf der [method bsearch] auf einem unsortierten Array "
+"führt zu unerwartetem Verhalten."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9149,19 +9533,57 @@ msgid ""
 "[b]Note:[/b] Calling [method bsearch_custom] on an unsorted array results in "
 "unexpected behavior."
 msgstr ""
+"Findet den Index eines vorhandenen Wertes (oder den Einfügeindex, der die "
+"Sortierreihenfolge beibehält, wenn der Wert noch nicht im Array vorhanden "
+"ist) mithilfe der binären Suche und eine benutzerdefinierte "
+"Vergleichsmethode, die im [code]obj[/code] deklariert ist. Optional kann ein "
+"[code]before[/code]-Spezifizierer übergeben werden. Wenn [code]false[/code], "
+"kommt der zurückgegebene Index nach allen vorhandenen Einträgen des Wertes "
+"im Array. Die benutzerdefinierte Methode erhält zwei Argumente (ein Element "
+"aus dem Array und den gesuchten Wert) und muss [code]true[/code] "
+"zurückgeben, wenn das erste Argument kleiner als das zweite ist, und "
+"ansonsten [code]false[/code].\n"
+"[codeblock]\n"
+"func cardinal_to_algebraic(a):\n"
+"    match a:\n"
+"        \"eins\":\n"
+"            return 1\n"
+"        \"zwei\":\n"
+"            return 2\n"
+"        \"drei\":\n"
+"            return 3\n"
+"        \"vier\":\n"
+"            return 4\n"
+"        _:\n"
+"            return 0\n"
+"\n"
+"func compare(a, b):\n"
+"    return cardinal_to_algebraic(a) < cardinal_to_algebraic(b)\n"
+"\n"
+"func _ready():\n"
+"    var a = [\"one\", \"two\", \"three\", \"four\"]\n"
+"    # `compare`ist in diesem Objekt definiert, also benutzen wir `self` als "
+"den `obj` Parameter.\n"
+"    print(a.bsearch_custom(\"three\", self, \"compare\", true)) # Expected "
+"value is 2.\n"
+"[/codeblock]\n"
+"[b]Hinweis:[/b] Der Aufruf der [method bsearch_custom] auf einem "
+"unsortierten Array führt zu unerwartetem Verhalten."
 
 #: doc/classes/Array.xml
 msgid ""
 "Clears the array. This is equivalent to using [method resize] with a size of "
 "[code]0[/code]."
 msgstr ""
+"Löscht das Array. Dies entspricht der Verwendung von [method resize] mit "
+"einer Größe von [code]0[/code]."
 
 #: doc/classes/Array.xml doc/classes/PoolByteArray.xml
 #: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
 #: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
 #: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
 msgid "Returns the number of times an element is in the array."
-msgstr ""
+msgstr "Gibt die Anzahl der Vorkommen eines Elements im Array zurück."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9173,6 +9595,14 @@ msgid ""
 "modifying a sub-array or dictionary in the copy will also impact those "
 "referenced in the source array."
 msgstr ""
+"Gibt eine Kopie des Arrays zurück.\n"
+"Wenn [code]deep[/code] [code]true[/code] ist, wird eine tiefe Kopie "
+"erstellt: alle verschachtelten Arrays und Dictionaries werden dupliziert und "
+"nicht mit dem ursprünglichen Array geteilt. Wenn es [code]false[/code] ist, "
+"wird eine flache Kopie erstellt und Verweise auf die ursprünglichen "
+"verschachtelten Arrays und Dictionaries werden beibehalten, so dass die "
+"Änderung eines Sub-Arrays oder Dictionaries in der Kopie auch Auswirkungen "
+"auf die im Quell-Array referenzierten hat."
 
 #: doc/classes/Array.xml doc/classes/PoolByteArray.xml
 #: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
@@ -9191,6 +9621,15 @@ msgid ""
 "element is close to the beginning of the array (index 0). This is because "
 "all elements placed after the removed element have to be reindexed."
 msgstr ""
+"Entfernt das erste Vorkommen eines Wertes aus dem Array. Wenn der Wert nicht "
+"im Array vorhanden ist, passiert nichts. Um ein Element nach Index zu "
+"entfernen, verwenden Sie stattdessen [method remove].\n"
+"[b]Hinweis:[/b] Diese Methode arbeitet in-place und gibt keinen Wert "
+"zurück.\n"
+"[b]Hinweis:[/b] Bei großen Arrays ist diese Methode langsamer, wenn das "
+"entfernte Element nahe am Anfang des Arrays liegt (Index 0). Das liegt "
+"daran, dass alle Elemente, die nach dem entfernten Element platziert sind, "
+"neu indiziert werden müssen."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9203,6 +9642,14 @@ msgid ""
 "array.fill(0) # Initialize the 10 elements to 0.\n"
 "[/codeblock]"
 msgstr ""
+"Weist allen Elementen des Arrays den angegebenen Wert zu. Dies kann "
+"normalerweise zusammen mit [method resize] verwendet werden, um ein Array "
+"mit einer bestimmten Größe und initialisierten Elementen zu erstellen:\n"
+"[codeblock]\n"
+"var array = []\n"
+"array.resize(10)\n"
+"array.fill(0) # Initialisieren Sie die 10 Elemente auf 0.\n"
+"[/codeblock]"
 
 #: doc/classes/Array.xml doc/classes/PoolByteArray.xml
 #: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
@@ -9213,12 +9660,18 @@ msgid ""
 "not found. Optionally, the initial search index can be passed. Returns "
 "[code]-1[/code] if [code]from[/code] is out of bounds."
 msgstr ""
+"Durchsucht das Array nach einem Wert und gibt dessen Index oder [code]-1[/"
+"code] zurück, wenn er nicht gefunden wurde. Optional kann auch der "
+"anfängliche Suchindex übergeben werden. Gibt [code]-1[/code] zurück, wenn "
+"[code]from[/code] außerhalb der Grenzen liegt."
 
 #: doc/classes/Array.xml
 msgid ""
 "Searches the array in reverse order for a value and returns its index or "
 "[code]-1[/code] if not found."
 msgstr ""
+"Durchsucht das Array in umgekehrter Reihenfolge nach einem Wert und gibt "
+"dessen Index oder [code]-1[/code] zurück, wenn er nicht gefunden wird."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9228,6 +9681,12 @@ msgid ""
 "[/code]. If the array is empty, accessing by index will pause project "
 "execution when running from the editor."
 msgstr ""
+"Gibt das erste Element des Arrays zurück. Gibt einen Fehler aus und liefert "
+"[code]null[/code], wenn das Array leer ist.\n"
+"[b]Hinweis:[/b] Der Aufruf dieser Funktion ist nicht dasselbe wie das "
+"Schreiben von [code]array[0][/code]. Wenn das Array leer ist, führt der "
+"Zugriff über den Index zu einer Unterbrechung der Projektausführung, wenn es "
+"vom Editor aus ausgeführt wird."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9246,6 +9705,20 @@ msgid ""
 "    pass\n"
 "[/codeblock]"
 msgstr ""
+"Gibt [code]true[/code] zurück, wenn das Array den angegebenen Wert enthält.\n"
+"[codeblock]\n"
+"[\"innerhalb\", 7].has(\"innerhalb\") # True\n"
+"[\"innerhalb\", 7].has(\"außerhalb\") # False\n"
+"[\"innerhalb\", 7].has(7) # True\n"
+"[\"innerhalb\", 7].has(\"7\") # False\n"
+"[/codeblock]\n"
+"[b]Hinweis:[/b] Dies entspricht der Verwendung des Operators [code]in[/code] "
+"wie folgt:\n"
+"[codeblock]\n"
+"# Wird als `true` ausgewertet.\n"
+"if 2 in [2, 4, 6, 8]:\n"
+"    pass\n"
+"[/codeblock]"
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9256,6 +9729,13 @@ msgid ""
 "does [i]not[/i] imply the arrays are equal, because different arrays can "
 "have identical hash values due to hash collisions."
 msgstr ""
+"Gibt einen gehashten 32-Bit-Ganzzahlwert zurück, der das Array und seinen "
+"Inhalt darstellt.\n"
+"[b]Hinweis:[/b] [Array]s mit gleichem Inhalt erzeugen immer identische "
+"Hashwerte. Das Gegenteil ist jedoch nicht der Fall. Die Rückgabe von "
+"identischen Hash-Werten bedeutet [i]nicht[/i], dass die Arrays gleich sind, "
+"da verschiedene Arrays aufgrund von Hash-Kollisionen identische Hash-Werte "
+"haben können."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9266,6 +9746,15 @@ msgid ""
 "element is close to the beginning of the array (index 0). This is because "
 "all elements placed after the newly inserted element have to be reindexed."
 msgstr ""
+"Fügt ein neues Element an einer bestimmten Position in das Array ein. Die "
+"Position muss gültig sein oder am Ende des Arrays liegen ([code]pos == size()"
+"[/code]).\n"
+"[b]Hinweis:[/b] Diese Methode arbeitet in-place und gibt keinen Wert "
+"zurück.\n"
+"[b]Hinweis:[/b] Bei großen Arrays wird diese Methode langsamer sein, wenn "
+"das eingefügte Element nahe am Anfang des Arrays (Index 0) liegt. Dies liegt "
+"daran, dass alle Elemente, die nach dem neu eingefügten Element platziert "
+"sind, neu indiziert werden müssen."
 
 #: doc/classes/Array.xml doc/classes/PoolByteArray.xml
 #: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
@@ -9280,6 +9769,9 @@ msgid ""
 "comparable types. If the elements can't be compared, [code]null[/code] is "
 "returned."
 msgstr ""
+"Gibt den größten im Array enthaltenen Wert zurück, wenn alle Elemente von "
+"vergleichbarem Typ sind. Wenn die Elemente nicht verglichen werden können, "
+"wird [code]null[/code] zurückgegeben."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9287,6 +9779,9 @@ msgid ""
 "comparable types. If the elements can't be compared, [code]null[/code] is "
 "returned."
 msgstr ""
+"Gibt den kleinsten im Array enthaltenen Wert zurück, wenn alle Elemente von "
+"vergleichbarem Typ sind. Wenn die Elemente nicht verglichen werden können, "
+"wird [code]null[/code] zurückgegeben."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9300,6 +9795,17 @@ msgid ""
 "removed element. The larger the array and the lower the index of the removed "
 "element, the slower [method pop_at] will be."
 msgstr ""
+"Entfernt das Element des Arrays am Index [code]position[/code] und gibt es "
+"zurück. Falls negativ, wird [code]position[/code] relativ zum Ende des "
+"Arrays betrachtet. Lässt das Array unangetastet und gibt [code]null[/code] "
+"zurück, wenn das Array leer ist oder wenn der Zugriff außerhalb der Grenzen "
+"erfolgt. Es wird eine Fehlermeldung ausgegeben, wenn der Zugriff auf das "
+"Array außerhalb der Grenzen erfolgt, aber nicht, wenn das Array leer ist.\n"
+"[b]Hinweis:[/b] Bei großen Arrays kann diese Methode langsamer sein als "
+"[method pop_back], da sie die Elemente des Arrays, die sich nach dem "
+"entfernten Element befinden, neu indiziert werden müssen. Je größer das "
+"Array und je niedriger der Index des entfernten Elements ist, desto "
+"langsamer wird die [method pop_at] sein."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9307,6 +9813,9 @@ msgid ""
 "if the array is empty, without printing an error message. See also [method "
 "pop_front]."
 msgstr ""
+"Entfernt und gibt das letzte Element des Arrays zurück. Gibt [code]null[/"
+"code] zurück, wenn das Array leer ist, ohne eine Fehlermeldung auszugeben. "
+"Siehe auch [Methode pop_front]."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9317,6 +9826,12 @@ msgid ""
 "pop_back] as it will reindex all the array's elements every time it's "
 "called. The larger the array, the slower [method pop_front] will be."
 msgstr ""
+"Entfernt und gibt das erste Element des Arrays zurück. Gibt [code]null[/"
+"code] zurück, wenn das Array leer ist, ohne eine Fehlermeldung auszugeben. "
+"Siehe auch [Methode pop_back].\n"
+"[b]Hinweis:[/b] Bei großen Arrays ist diese Methode viel langsamer als "
+"[method pop_back], da sie bei jedem Aufruf alle Elemente des Arrays neu "
+"indiziert. Je größer das Array, desto langsamer ist [method pop_front]."
 
 #: doc/classes/Array.xml
 #, fuzzy
@@ -9332,6 +9847,11 @@ msgid ""
 "push_back] as it will reindex all the array's elements every time it's "
 "called. The larger the array, the slower [method push_front] will be."
 msgstr ""
+"Fügt ein Element am Anfang des Arrays hinzu. Siehe auch [Methode "
+"push_back].\n"
+"[b]Hinweis:[/b] Bei großen Arrays ist diese Methode viel langsamer als "
+"[method push_back], da sie bei jedem Aufruf alle Elemente des Arrays neu "
+"indiziert. Je größer das Array, desto langsamer ist [method push_front]."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9343,6 +9863,15 @@ msgid ""
 "element is close to the beginning of the array (index 0). This is because "
 "all elements placed after the removed element have to be reindexed."
 msgstr ""
+"Entfernt ein Element aus dem Array nach Index. Wenn der Index im Array nicht "
+"vorhanden ist, passiert nichts. Um ein Element durch die Suche nach seinem "
+"Wert zu entfernen, verwenden Sie stattdessen [method erase].\n"
+"[b]Hinweis:[/b] Diese Methode arbeitet in-place und gibt keinen Wert "
+"zurück.\n"
+"[b]Hinweis:[/b] Bei großen Arrays ist diese Methode langsamer, wenn das "
+"entfernte Element nahe am Anfang des Arrays liegt (Index 0). Dies liegt "
+"daran, dass alle Elemente, die nach dem entfernten Element platziert sind, "
+"neu indiziert werden müssen."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9350,6 +9879,9 @@ msgid ""
 "size is smaller, elements are cleared, if bigger, new elements are "
 "[code]null[/code]."
 msgstr ""
+"Ändert die Größe des Arrays, damit es eine andere Anzahl von Elementen "
+"enthält. Ist die Größe des Arrays kleiner, werden die Elemente gelöscht, ist "
+"sie größer, sind die neuen Elemente [code]null[/code]."
 
 #: doc/classes/Array.xml doc/classes/PoolByteArray.xml
 #: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
@@ -9361,6 +9893,10 @@ msgid ""
 "the array. If the adjusted start index is out of bounds, this method "
 "searches from the end of the array."
 msgstr ""
+"Durchsucht das Array in umgekehrter Reihenfolge. Optional kann ein Start-"
+"Suchindex übergeben werden. Ist dieser negativ, wird der Startindex relativ "
+"zum Ende des Arrays betrachtet. Liegt der eingestellte Startindex außerhalb "
+"der Grenzen, sucht diese Methode ab dem Ende des Arrays."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9369,6 +9905,11 @@ msgid ""
 "@GDScript.randi]. Call [method @GDScript.randomize] to ensure that a new "
 "seed will be used each time if you want non-reproducible shuffling."
 msgstr ""
+"Mischt das Array so, dass die Elemente eine zufällige Reihenfolge haben. "
+"Diese Methode verwendet den globalen Zufallszahlengenerator, der auch für "
+"Methoden wie [method @GDScript.randi] verwendet wird. Rufen Sie [method "
+"@GDScript.randomize] auf, um sicherzustellen, dass jedes Mal ein neuer Seed "
+"verwendet wird, wenn Sie ein nicht reproduzierbares Mischen wünschen."
 
 #: doc/classes/Array.xml doc/classes/PoolByteArray.xml
 #: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
@@ -9384,6 +9925,11 @@ msgid ""
 "and upper index are inclusive, with the [code]step[/code] describing the "
 "change between indices while slicing."
 msgstr ""
+"Dupliziert die in der Funktion beschriebene Teilmenge und gibt sie in einem "
+"Array zurück, wobei das Array tief kopiert wird, wenn [code]deep[/code] "
+"[code]true[/code] ist. Unterer und oberer Index sind inklusive, wobei "
+"[code]step[/code] den Wechsel zwischen den Indizes während des Slicings "
+"beschreibt."
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9397,6 +9943,16 @@ msgid ""
 "print(strings) # Prints [string1, string10, string11, string2]\n"
 "[/codeblock]"
 msgstr ""
+"Sortiert das Array.\n"
+"[b]Hinweis:[/b] Strings werden in alphabetischer Reihenfolge sortiert (im "
+"Gegensatz zur natürlichen Reihenfolge). Dies kann zu unerwartetem Verhalten "
+"führen, wenn ein Array mit Strings sortiert wird, die mit einer Zahlenfolge "
+"enden. Betrachten Sie das folgende Beispiel:\n"
+"[codeblock]\n"
+"var strings = [\"string1\", \"string2\", \"string10\", \"string11\"]\n"
+"strings.sort()\n"
+"print(strings) # Prints [string1, string10, string11, string2]\n"
+"[/codeblock]"
 
 #: doc/classes/Array.xml
 msgid ""
@@ -9422,11 +9978,33 @@ msgid ""
 "print(my_items) # Prints [[4, Tomato], [5, Potato], [9, Rice]].\n"
 "[/codeblock]"
 msgstr ""
+"Sortiert das Array mit einer eigenen Methode. Die Argumente sind ein Objekt, "
+"das die Methode enthält, und der Name dieser Methode. Die benutzerdefinierte "
+"Methode erhält zwei Argumente (ein Paar von Elementen aus dem Array) und "
+"muss entweder [code]true[/code] oder [code]false[/code] zurückgeben.\n"
+"Für zwei Elemente [code]a[/code] und [code]b[/code], wenn die angegebene "
+"Methode [code]true[/code] zurückgibt, wird Element [code]b[/code] nach "
+"Element [code]a[/code] im Array stehen.\n"
+"[b]Hinweis:[/b] Sie können den Rückgabewert nicht zufällig bestimmen, da der "
+"Heapsort-Algorithmus ein deterministisches Ergebnis erwartet. Dies würde zu "
+"einem unerwarteten Verhalten führen.\n"
+"[codeblock]\n"
+"class MyCustomSorter:\n"
+"    static func sort_ascending(a, b):\n"
+"        if a[0] < b[0]:\n"
+"            return true\n"
+"        return false\n"
+"\n"
+"var my_items = [[5, \"Kartoffel\"], [9, \"Reis\"], [4, \"Tomate\"]]\n"
+"my_items.sort_custom(MyCustomSorter, \"sort_ascending\")\n"
+"print(my_items) # Prints [[4, Tomate], [5, Kartoffel], [9, Reis]].\n"
+"[/codeblock]"
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "[Mesh] type that provides utility for constructing a surface from arrays."
 msgstr ""
+"[Mesh]-Typ, der das Konstruieren einer Oberfläche aus Arrays ermöglicht."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
@@ -9455,12 +10033,40 @@ msgid ""
 "OpenGL/Face-culling]winding order[/url] for front faces of triangle "
 "primitive modes."
 msgstr ""
+"Das [ArrayMesh] wird verwendet, um ein [Mesh] zu konstruieren, indem die "
+"Attribute als Arrays angegeben werden.\n"
+"Das einfachste Beispiel ist die Erstellung eines einzelnen Dreiecks:\n"
+"[codeblock]\n"
+"var vertices = PoolVector3Array()\n"
+"vertices.push_back(Vector3(0, 1, 0))\n"
+"vertices.push_back(Vector3(1, 0, 0))\n"
+"vertices.push_back(Vector3(0, 0, 1))\n"
+"# Initialisiere das ArrayMesh.\n"
+"var arr_mesh = ArrayMesh.new()\n"
+"var arrays = []\n"
+"arrays.resize(ArrayMesh.ARRAY_MAX)\n"
+"arrays[ArrayMesh.ARRAY_VERTEX] = vertices\n"
+"# Erstelle das Mesh.\n"
+"arr_mesh.add_surface_from_arrays(Mesh.PRIMITIVE_TRIANGLES, arrays)\n"
+"var m = MeshInstance.new()\n"
+"m.mesh = arr_mesh\n"
+"[/codeblock]\n"
+"Die [MeshInstance] ist bereit, dem darzustellenden [SceneTree] hinzugefügt "
+"zu werden.\n"
+"Siehe auch [ImmediateGeometry], [MeshDataTool] und [SurfaceTool] für "
+"prozedurale Geometrieerzeugung.\n"
+"[b]Hinweis:[/b] Godot verwendet die [url=https://learnopengl.com/Advanced-"
+"OpenGL/Face-culling]Wickelreihenfolge[/url] im Uhrzeigersinn für "
+"Vorderseiten von Dreiecks-Primitivmodi."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Adds name for a blend shape that will be added with [method "
 "add_surface_from_arrays]. Must be called before surface is added."
 msgstr ""
+"Fügt einen Namen für eine Mischform hinzu, die mit der [method "
+"add_surface_from_arrays] hinzugefügt wird. Muss aufgerufen werden, bevor die "
+"Oberfläche hinzugefügt wird."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
@@ -9479,76 +10085,105 @@ msgid ""
 "length as the vertex array or be empty, except for [constant ARRAY_INDEX] if "
 "it is used."
 msgstr ""
+"Erzeugt eine neue Oberfläche.\n"
+"Flächen werden erstellt, um mit einem [code]primitive[/code] gerendert zu "
+"werden, das einer der in [enum Mesh.PrimitiveType] definierten Typen sein "
+"kann. (Es wird empfohlen, bei der Verwendung von Indizes nur Punkte, Linien "
+"oder Dreiecke zu verwenden). Die [method Mesh.get_surface_count] wird zur "
+"[code]surf_idx[/code] für diese neue Oberfläche.\n"
+"Das Argument [code]arrays[/code] ist ein Array von Arrays. Siehe [enum "
+"ArrayType] für die in diesem Array verwendeten Werte. Zum Beispiel ist "
+"[code]arrays[0][/code] das Array der Vertices. Das erste Vertex-Sub-Array "
+"ist immer erforderlich; die anderen sind optional. Das Hinzufügen eines "
+"Index-Arrays versetzt diese Funktion in den \"Index-Modus\", in dem die "
+"Vertex- und anderen Arrays zu Datenquellen werden und das Index-Array die "
+"Reihenfolge der Vertexe definiert. Alle Sub-Arrays müssen die gleiche Länge "
+"wie das Vertex-Array haben oder leer sein, mit Ausnahme der [constant "
+"ARRAY_INDEX], falls sie verwendet wird."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Removes all blend shapes from this [ArrayMesh]."
-msgstr ""
+msgstr "Entfernt alle Mischformen aus diesem [ArrayMesh]."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Removes all surfaces from this [ArrayMesh]."
-msgstr ""
+msgstr "Entfernt alle Flächen aus diesem [ArrayMesh]."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Returns the number of blend shapes that the [ArrayMesh] holds."
-msgstr ""
+msgstr "Gibt die Anzahl der Blendformen zurück, die das [ArrayMesh] enthält."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Returns the name of the blend shape at this index."
-msgstr ""
+msgstr "Gibt den Namen der Blendform an diesem Index zurück."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Will perform a UV unwrap on the [ArrayMesh] to prepare the mesh for "
 "lightmapping."
 msgstr ""
+"Führt ein UV Unwrap auf dem [ArrayMesh] durch, um das Mesh für das "
+"Lightmapping vorzubereiten."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Will regenerate normal maps for the [ArrayMesh]."
-msgstr ""
+msgstr "Regeneriert Normal Maps für das [ArrayMesh]."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Returns the index of the first surface with this name held within this "
 "[ArrayMesh]. If none are found, -1 is returned."
 msgstr ""
+"Gibt den Index der ersten Fläche mit diesem Namen in diesem [ArrayMesh] "
+"zurück. Wenn keine gefunden wird, wird -1 zurückgegeben."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Returns the length in indices of the index array in the requested surface "
 "(see [method add_surface_from_arrays])."
 msgstr ""
+"Gibt die Länge des Index-Arrays in der angeforderten Oberfläche in Indizes "
+"zurück (siehe [method add_surface_from_arrays])."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Returns the length in vertices of the vertex array in the requested surface "
 "(see [method add_surface_from_arrays])."
 msgstr ""
+"Gibt die Länge des Vertex-Arrays in der angeforderten Oberfläche in Vertices "
+"zurück (siehe [method add_surface_from_arrays])."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Returns the format mask of the requested surface (see [method "
 "add_surface_from_arrays])."
 msgstr ""
+"Gibt die Formatmaske der angeforderten Oberfläche zurück (siehe [method "
+"add_surface_from_arrays])."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Gets the name assigned to this surface."
-msgstr ""
+msgstr "Ruft den dieser Fläche zugewiesenen Namen ab."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Returns the primitive type of the requested surface (see [method "
 "add_surface_from_arrays])."
 msgstr ""
+"Gibt den primitiven Typ der angeforderten Fläche zurück (siehe [method "
+"add_surface_from_arrays])."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Removes a surface at position [code]surf_idx[/code], shifting greater "
 "surfaces one [code]surf_idx[/code] slot down."
 msgstr ""
+"Entfernt eine Fläche an der Position [code]surf_idx[/code] und verschiebt "
+"größere Flächen um einen [code]surf_idx[/code] Slot nach unten."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Sets a name for a given surface."
-msgstr ""
+msgstr "Legt einen Namen für eine bestimmte Oberfläche fest."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
@@ -9556,10 +10191,14 @@ msgid ""
 "[b]Warning:[/b] Only use if you know what you are doing. You can easily "
 "cause crashes by calling this function with improper arguments."
 msgstr ""
+"Aktualisiert einen bestimmten Bereich von Mesh-Arrays auf der GPU.\n"
+"[b]Warnung:[/b] Nur verwenden, wenn Sie wissen, was Sie tun. Sie können "
+"leicht Abstürze verursachen, wenn Sie diese Funktion mit falschen Argumenten "
+"aufrufen."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Sets the blend shape mode to one of [enum Mesh.BlendShapeMode]."
-msgstr ""
+msgstr "Setzt den Blendform-Modus auf einen der [enum Mesh.BlendShapeMode]."
 
 #: doc/classes/ArrayMesh.xml doc/classes/PrimitiveMesh.xml
 msgid ""
@@ -9567,22 +10206,26 @@ msgid ""
 "Especially useful to avoid unexpected culling when using a shader to offset "
 "vertices."
 msgstr ""
+"Überschreibt den [AABB] mit einem vom Benutzer definierten Wert für die "
+"Verwendung mit Frustum Culling. Besonders nützlich, um unerwartetes Culling "
+"zu vermeiden, wenn ein Shader zum Versetzen von Vertices verwendet wird."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Value used internally when no indices are present."
-msgstr ""
+msgstr "Wert wird intern benutzt, wenn keine Indizes vorhanden sind."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Amount of weights/bone indices per vertex (always 4)."
-msgstr ""
+msgstr "Anzahl der Gewichte/Knochenindizes pro Vertex (immer 4)."
 
 #: doc/classes/ArrayMesh.xml
 msgid "[PoolVector3Array], [PoolVector2Array], or [Array] of vertex positions."
 msgstr ""
+"[PoolVector3Array], [PoolVector2Array] oder [Array] von Vertex-Positionen."
 
 #: doc/classes/ArrayMesh.xml
 msgid "[PoolVector3Array] of vertex normals."
-msgstr ""
+msgstr "[PoolVector3Array] von Vertex-Normalen."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
@@ -9590,28 +10233,34 @@ msgid ""
 "first 3 floats determine the tangent, and the last the binormal direction as "
 "-1 or 1."
 msgstr ""
+"[PoolRealArray] von Vertex-Tangenten. Jedes Element in Gruppen von 4 Floats, "
+"die ersten 3 Floats bestimmen die Tangente, und das letzte die binormale "
+"Richtung als -1 oder 1."
 
 #: doc/classes/ArrayMesh.xml
 msgid "[PoolColorArray] of vertex colors."
-msgstr ""
+msgstr "[PoolColorArray] von Vertex-Farben."
 
 #: doc/classes/ArrayMesh.xml
 msgid "[PoolVector2Array] for UV coordinates."
-msgstr ""
+msgstr "[PoolVector2Array] für UV-Koordinaten."
 
 #: doc/classes/ArrayMesh.xml
 msgid "[PoolVector2Array] for second UV coordinates."
-msgstr ""
+msgstr "[PoolVector2Array] für zweite UV-Koordinaten."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "[PoolRealArray] or [PoolIntArray] of bone indices. Each element in groups of "
 "4 floats."
 msgstr ""
+"[PoolRealArray] oder [PoolIntArray] von Knochenindizes. Jedes Element in "
+"Gruppen von 4 Floats."
 
 #: doc/classes/ArrayMesh.xml
 msgid "[PoolRealArray] of bone weights. Each element in groups of 4 floats."
 msgstr ""
+"[PoolRealArray] von Knochengewichten. Jedes Element in Gruppen von 4 Floats."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
@@ -9626,50 +10275,61 @@ msgid ""
 "vertices of each triangle. For lines, the index array is in pairs indicating "
 "the start and end of each line."
 msgstr ""
+"[PoolIntArray] von Ganzzahlen, die als Indizes verwendet werden und auf "
+"Vertices, Farben, Normalen, Tangenten und Texturen verweisen. Alle diese "
+"Arrays müssen die gleiche Anzahl von Elementen haben wie das Vertex-Array. "
+"Kein Index kann über die Größe des Vertex-Arrays hinausgehen. Wenn dieses "
+"Index-Array vorhanden ist, versetzt es die Funktion in den \"Index-Modus\", "
+"in dem der Index den *i*-ten Vertex, die Normale, die Tangente, die Farbe, "
+"die UV, usw. auswählt. Das bedeutet, wenn man verschiedene Normalen oder "
+"Farben entlang einer Kante haben will, muss man die Vertices duplizieren.\n"
+"Bei Dreiecken wird das Index-Array als Tripel interpretiert, das sich auf "
+"die Vertices der einzelnen Dreiecke bezieht. Bei Linien besteht das Index-"
+"Array aus Paaren, die den Anfang und das Ende jeder Linie angeben."
 
 #: doc/classes/ArrayMesh.xml doc/classes/Mesh.xml doc/classes/VisualServer.xml
 msgid "Represents the size of the [enum ArrayType] enum."
-msgstr ""
+msgstr "Stellt die Größe der Aufzählung [enum ArrayType] dar."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Array format will include vertices (mandatory)."
-msgstr ""
+msgstr "Das Array-Format enthält Vertices (obligatorisch)."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Array format will include normals."
-msgstr ""
+msgstr "Das Array-Format enthält Normalen."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Array format will include tangents."
-msgstr ""
+msgstr "Das Array-Format enthält Tangenten."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Array format will include a color array."
-msgstr ""
+msgstr "Das Array-Format enthält ein Farbarray."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Array format will include UVs."
-msgstr ""
+msgstr "Das Array-Format enthält UVs."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Array format will include another set of UVs."
-msgstr ""
+msgstr "Das Array-Format enthält einen weiteren Satz von UVs."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Array format will include bone indices."
-msgstr ""
+msgstr "Das Array-Format enthält Knochenindizes."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Array format will include bone weights."
-msgstr ""
+msgstr "Das Array-Format enthält Knochengewichte."
 
 #: doc/classes/ArrayMesh.xml
 msgid "Index array will be used."
-msgstr ""
+msgstr "Das Index-Array wird verwendet."
 
 #: doc/classes/ARVRAnchor.xml
 msgid "An anchor point in AR space."
-msgstr ""
+msgstr "Ein Ankerpunkt im AR-Raum."
 
 #: doc/classes/ARVRAnchor.xml
 msgid ""
@@ -9687,16 +10347,32 @@ msgid ""
 "more about the real world out there especially if only part of the surface "
 "is in view."
 msgstr ""
+"Der [ARVRAnchor]-Punkt ist ein räumlicher Knoten, der einen von der AR-"
+"Plattform identifizierten Standort in der realen Welt auf eine Position "
+"innerhalb der Spielwelt abbildet. Solange z. B. die Ebenenerkennung in ARKit "
+"aktiviert ist, identifiziert und aktualisiert ARKit die Position von Ebenen "
+"(Tische, Böden usw.) und erstellt Anker für sie.\n"
+"Dieser Knoten wird durch seine eindeutige ID auf einen der Anker abgebildet. "
+"Wenn Sie ein Signal erhalten, dass ein neuer Anker verfügbar ist, sollten "
+"Sie diesen Knoten zu Ihrer Szene für diesen Anker hinzufügen. Sie können "
+"Knoten vordefinieren und die ID festlegen; die Knoten bleiben dann einfach "
+"auf 0,0,0, bis eine Ebene erkannt wird.\n"
+"Denken Sie daran, dass, solange die Ebenenerkennung aktiviert ist, die "
+"Größe, Platzierung und Ausrichtung eines Ankers aktualisiert wird, da die "
+"Erkennungslogik mehr über die reale Welt da draußen erfährt, insbesondere "
+"wenn nur ein Teil der Oberfläche im Blickfeld ist."
 
 #: doc/classes/ARVRAnchor.xml
 msgid "Returns the name given to this anchor."
-msgstr ""
+msgstr "Gibt den Namen zurück, der diesem Anker gegeben wurde."
 
 #: doc/classes/ARVRAnchor.xml
 msgid ""
 "Returns [code]true[/code] if the anchor is being tracked and [code]false[/"
 "code] if no anchor with this ID is currently known."
 msgstr ""
+"Gibt [code]true[/code] zurück, wenn der Anker verfolgt wird, und "
+"[code]false[/code], wenn derzeit kein Anker mit dieser ID bekannt ist."
 
 #: doc/classes/ARVRAnchor.xml
 msgid ""
@@ -9706,11 +10382,18 @@ msgid ""
 "can be used to create shadows/reflections on surfaces or for generating "
 "collision shapes."
 msgstr ""
+"Falls vom [ARVRInterface] bereitgestellt, wird ein Mesh-Objekt für den Anker "
+"zurückgegeben. Bei einem Anker kann es sich um eine Form handeln, die sich "
+"auf das verfolgte Objekt bezieht, oder um ein Mesh, das eine Topologie in "
+"Bezug auf den Anker bietet und zur Erstellung von Schatten/Reflexionen auf "
+"Oberflächen oder zur Erzeugung von Kollisionsformen verwendet werden kann."
 
 #: doc/classes/ARVRAnchor.xml
 msgid ""
 "Returns a plane aligned with our anchor; handy for intersection testing."
 msgstr ""
+"Gibt eine Ebene zurück, die an unserem Anker ausgerichtet ist; praktisch für "
+"Schnittpunkttests."
 
 #: doc/classes/ARVRAnchor.xml
 msgid ""
@@ -9718,6 +10401,9 @@ msgid ""
 "anchor relates to a table in the real world, this is the estimated size of "
 "the surface of that table."
 msgstr ""
+"Gibt die geschätzte Größe der erkannten Fläche zurück. Wenn sich der Anker "
+"beispielsweise auf einen Tisch in der realen Welt bezieht, ist dies die "
+"geschätzte Größe der Oberfläche dieses Tisches."
 
 #: doc/classes/ARVRAnchor.xml
 msgid ""
@@ -9728,6 +10414,12 @@ msgid ""
 "when the AR server identifies that two anchors represent different parts of "
 "the same plane and merges them."
 msgstr ""
+"Die ID des Ankers. Sie können diese festlegen, bevor der Anker selbst "
+"existiert. Der erste Anker erhält eine ID von [code]1[/code], der zweite "
+"eine ID von [code]2[/code] usw. Wenn Anker entfernt werden, kann die Engine "
+"dann die entsprechende ID neuen Ankern zuweisen. Die häufigste Situation, in "
+"der Anker \"verschwinden\", ist, wenn der AR-Server feststellt, dass zwei "
+"Anker verschiedene Teile derselben Ebene darstellen, und sie zusammenführt."
 
 #: doc/classes/ARVRAnchor.xml
 msgid ""
@@ -9735,12 +10427,17 @@ msgid ""
 "available. This is especially important for topology that is constantly "
 "being [code]mesh_updated[/code]."
 msgstr ""
+"Wird ausgesendet, wenn sich das mit dem Anker verbundene Netz ändert oder "
+"eines verfügbar wird. Dies ist besonders wichtig für eine Topologie, die "
+"ständig [code]mesh_updated[/code] wird."
 
 #: doc/classes/ARVRCamera.xml
 msgid ""
 "A camera node with a few overrules for AR/VR applied, such as location "
 "tracking."
 msgstr ""
+"Ein Kameraknoten, der einige Grundregeln für AR/VR anwendet, z. B. die "
+"Standortverfolgung."
 
 #: doc/classes/ARVRCamera.xml
 msgid ""
@@ -9755,10 +10452,23 @@ msgid ""
 "tracking data of the HMD and the location of the ARVRCamera can lag a few "
 "milliseconds behind what is used for rendering as a result."
 msgstr ""
+"Dies ist ein räumlicher Hilfsknoten für unsere Kamera; beachten Sie, dass "
+"bei stereoskopischem Rendering (VR-HMD) die meisten Kameraeigenschaften "
+"ignoriert werden, da die HMD-Informationen sie außer Kraft setzen. Die "
+"einzigen Eigenschaften, auf die man sich verlassen kann, sind die Nah- und "
+"Fern-Ebene.\n"
+"Die Position und Ausrichtung dieses Knotens wird vom ARVR-Server automatisch "
+"aktualisiert, um die Position des HMD darzustellen, wenn eine solche "
+"Verfolgung verfügbar ist, und kann somit von der Spiellogik verwendet "
+"werden. Beachten Sie, dass der Render-Thread im Gegensatz zum ARVR "
+"Controller Zugriff auf die aktuellsten Tracking-Daten des HMD hat und die "
+"Position der ARVRCamera daher einige Millisekunden hinter dem zurückbleiben "
+"kann, was für das Rendering verwendet wird."
 
 #: doc/classes/ARVRController.xml
 msgid "A spatial node representing a spatially-tracked controller."
 msgstr ""
+"Ein räumlicher Knoten, der einen räumlich verfolgten Controller darstellt."
 
 #: doc/classes/ARVRController.xml
 msgid ""
@@ -9775,18 +10485,35 @@ msgid ""
 "[ARVRServer]. This makes this node ideal to add child nodes to visualize the "
 "controller."
 msgstr ""
+"Dies ist ein räumlicher Hilfsknoten, der mit der Verfolgung von Controllern "
+"verbunden ist. Er bietet auch mehrere praktische Durchreichungen für den "
+"Zustand von Schaltflächen und dergleichen auf den Controllern.\n"
+"Controller sind durch ihre ID verknüpft. Sie können Controller-Knoten "
+"erstellen, bevor die Controller verfügbar sind. Wenn Ihr Spiel immer zwei "
+"Controller verwendet (einen für jede Hand), können Sie die Controller mit "
+"der ID 1 und 2 vordefinieren; sie werden aktiv, sobald die Controller "
+"erkannt werden. Wenn Sie erwarten, dass zusätzliche Controller verwendet "
+"werden, sollten Sie auf die Signale reagieren und ARVRController-Knoten zu "
+"Ihrer Szene hinzufügen.\n"
+"Die Position des Controllerknotens wird automatisch durch den [ARVRServer] "
+"aktualisiert. Dies macht diesen Knoten ideal, um Kindknoten zur "
+"Visualisierung des Controllers hinzuzufügen."
 
 #: doc/classes/ARVRController.xml
 msgid ""
 "If active, returns the name of the associated controller if provided by the "
 "AR/VR SDK used."
 msgstr ""
+"Wenn aktiv, wird der Name des zugehörigen Controllers zurückgegeben, sofern "
+"er vom verwendeten AR/VR-SDK bereitgestellt wird."
 
 #: doc/classes/ARVRController.xml
 msgid ""
 "Returns the hand holding this controller, if known. See [enum "
 "ARVRPositionalTracker.TrackerHand]."
 msgstr ""
+"Gibt die Hand zurück, die diesen Controller hält, falls bekannt. Siehe [enum "
+"ARVRPositionalTracker.TrackerHand]."
 
 #: doc/classes/ARVRController.xml
 #, fuzzy
@@ -9802,6 +10529,8 @@ msgid ""
 "Returns the value of the given axis for things like triggers, touchpads, "
 "etc. that are embedded into the controller."
 msgstr ""
+"Gibt den Wert der angegebenen Achse für Dinge wie Trigger, Touchpads usw. "
+"zurück, die in den Controller eingebettet sind."
 
 #: doc/classes/ARVRController.xml
 msgid ""
@@ -9812,12 +10541,22 @@ msgid ""
 "the AR/VR controllers. This ID is purely offered as information so you can "
 "link up the controller with its joystick entry."
 msgstr ""
+"Gibt die ID des Joystick-Objekts zurück, das mit diesem verbunden ist. Jeder "
+"vom [ARVRServer] verfolgte Controller, der Tasten und Achsen hat, wird auch "
+"als Joystick in Godot registriert. Das bedeutet, dass alle normalen Joystick-"
+"Verfolgungen und Eingabe-Zuordnungen für Tasten und Achsen auf den AR/VR-"
+"Controllern funktionieren werden. Diese ID wird lediglich als Information "
+"angeboten, damit Sie den Controller mit seinem Joystick-Eintrag verknüpfen "
+"können."
 
 #: doc/classes/ARVRController.xml
 msgid ""
 "If provided by the [ARVRInterface], this returns a mesh associated with the "
 "controller. This can be used to visualize the controller."
 msgstr ""
+"Falls von der [ARVRInterface] bereitgestellt, wird ein mit dem Controller "
+"verbundenes Netz zurückgegeben. Dieses kann zur Visualisierung des "
+"Controllers verwendet werden."
 
 #: doc/classes/ARVRController.xml
 msgid ""
@@ -9825,6 +10564,9 @@ msgid ""
 "pressed. See [enum JoystickList], in particular the [code]JOY_VR_*[/code] "
 "constants."
 msgstr ""
+"Gibt [code]true[/code] zurück, wenn die Taste bei Index [code]button[/code] "
+"gedrückt ist. Siehe [enum JoystickList], insbesondere die [code]JOY_VR_*[/"
+"code] Konstanten."
 
 #: doc/classes/ARVRController.xml
 msgid ""
@@ -9838,6 +10580,16 @@ msgid ""
 "When a controller is turned off, its slot is freed. This ensures controllers "
 "will keep the same ID even when controllers with lower IDs are turned off."
 msgstr ""
+"Die ID des Controllers.\n"
+"Eine Controller-ID von 0 ist ungebunden und führt immer zu einem inaktiven "
+"Knoten. Die Controller-ID 1 ist für den ersten Controller reserviert, der "
+"sich als linker Controller identifiziert, und die ID 2 ist für den ersten "
+"Controller reserviert, der sich als rechter Controller identifiziert.\n"
+"Für jeden weiteren Controller, den der [ARVRServer] erkennt, wird mit der "
+"Controller-ID 3 fortgefahren.\n"
+"Wenn ein Controller ausgeschaltet wird, wird sein Steckplatz freigegeben. "
+"Dadurch wird sichergestellt, dass die Controller dieselbe ID behalten, auch "
+"wenn Controller mit niedrigeren IDs ausgeschaltet werden."
 
 #: doc/classes/ARVRController.xml
 msgid ""
@@ -9847,14 +10599,21 @@ msgid ""
 "This is a useful property to animate if you want the controller to vibrate "
 "for a limited duration."
 msgstr ""
+"Der Grad, in dem die Steuerung vibriert. Der Bereich reicht von [code]0.0[/"
+"code] bis [code]1.0[/code]. Wenn er geändert wird, wird [member "
+"ARVRPositionalTracker.rumble] entsprechend aktualisiert.\n"
+"Dies ist eine nützliche Eigenschaft zum Animieren, wenn der Controller für "
+"eine begrenzte Dauer vibrieren soll."
 
 #: doc/classes/ARVRController.xml
 msgid "Emitted when a button on this controller is pressed."
 msgstr ""
+"Wird ausgesendet, wenn eine Taste auf diesem Steuergerät gedrückt wird."
 
 #: doc/classes/ARVRController.xml
 msgid "Emitted when a button on this controller is released."
 msgstr ""
+"Wird ausgesendet, wenn eine Taste an diesem Controller losgelassen wird."
 
 #: doc/classes/ARVRController.xml
 msgid ""
@@ -9862,10 +10621,13 @@ msgid ""
 "becomes available. Generally speaking this will be a static mesh after "
 "becoming available."
 msgstr ""
+"Wird ausgesendet, wenn sich das mit dem Controller verknüpfte Netz ändert "
+"oder wenn eines verfügbar wird. Im Allgemeinen wird dies ein statisches Mesh "
+"sein, nachdem es verfügbar geworden ist."
 
 #: doc/classes/ARVRInterface.xml
 msgid "Base class for an AR/VR interface implementation."
-msgstr ""
+msgstr "Basisklasse für die Implementierung einer AR/VR-Schnittstelle."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9878,6 +10640,15 @@ msgid ""
 "give us a working setup. You can query the available interfaces through "
 "[ARVRServer]."
 msgstr ""
+"Diese Klasse muss implementiert werden, um eine AR- oder VR-Plattform für "
+"Godot verfügbar zu machen. Diese sollten als C++-Module oder GDNative-Module "
+"implementiert werden (beachten Sie, dass für GDNative die Unterklasse "
+"ARVRScriptInterface verwendet werden sollte). Ein Teil der Schnittstelle ist "
+"für GDScript offengelegt, so dass Sie eine AR- oder VR-Plattform erkennen, "
+"aktivieren und konfigurieren können.\n"
+"Die Schnittstellen sollten so geschrieben sein, dass man durch einfaches "
+"Aktivieren ein funktionierendes Setup erhält. Sie können die verfügbaren "
+"Schnittstellen über [ARVRServer] abfragen."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9885,22 +10656,31 @@ msgid ""
 "background, this method returns the feed ID in the [CameraServer] for this "
 "interface."
 msgstr ""
+"Wenn es sich um eine AR-Schnittstelle handelt, die die Anzeige eines "
+"Kamerafeeds als Hintergrund erfordert, gibt diese Methode die Feed-ID im "
+"[CameraServer] für diese Schnittstelle zurück."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "Returns a combination of [enum Capabilities] flags providing information "
 "about the capabilities of this interface."
 msgstr ""
+"Gibt eine Kombination von [enum Capabilities]-Flags zurück, die "
+"Informationen über die Fähigkeiten dieser Schnittstelle liefern."
 
 #: doc/classes/ARVRInterface.xml
 msgid "Returns the name of this interface (OpenVR, OpenHMD, ARKit, etc)."
 msgstr ""
+"Gibt den Namen dieser Schnittstelle zurück (OpenVR, OpenHMD, ARKit, etc.)."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "Returns the resolution at which we should render our intermediate results "
 "before things like lens distortion are applied by the VR platform."
 msgstr ""
+"Gibt die Auflösung zurück, mit der wir unsere Zwischenergebnisse rendern "
+"sollten, bevor Dinge wie Linsenverzerrungen von der VR-Plattform angewendet "
+"werden."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9908,6 +10688,9 @@ msgid ""
 "provide feedback to the user whether there are issues with positional "
 "tracking."
 msgstr ""
+"Gibt, falls unterstützt, den Status unserer Positionsbestimmung zurück. So "
+"können Sie dem Benutzer eine Rückmeldung geben, ob es Probleme mit der "
+"Positionsbestimmung gibt."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9928,45 +10711,72 @@ msgid ""
 "wish to do this if you want to track controllers from other platforms. "
 "However, at this point in time only one interface can render to an HMD."
 msgstr ""
+"Rufen Sie dies auf, um diese Schnittstelle zu initialisieren. Die erste "
+"Schnittstelle, die initialisiert wird, wird als primäre Schnittstelle "
+"identifiziert und wird für die Rendering-Ausgabe verwendet.\n"
+"Nach der Initialisierung der Schnittstelle, die Sie verwenden möchten, "
+"müssen Sie den AR/VR-Modus eines Ansichtsfensters aktivieren und das "
+"Rendering sollte beginnen.\n"
+"[b]Hinweis:[/b] Sie müssen den AR/VR-Modus im Haupt-Viewport für jedes Gerät "
+"aktivieren, das die Hauptausgabe von Godot verwendet, z. B. für mobile VR.\n"
+"Wenn Sie dies für eine Plattform tun, die ihre eigene Ausgabe verarbeitet "
+"(wie OpenVR), zeigt Godot nur ein Auge ohne Verzerrung auf dem Bildschirm "
+"an. Alternativ können Sie einen separaten Viewport-Knoten zu Ihrer Szene "
+"hinzufügen und AR/VR in diesem Viewport aktivieren. Es wird für die Ausgabe "
+"an das HMD verwendet, so dass Sie im Hauptfenster alles tun können, was Sie "
+"möchten, z. B. eine separate Kamera als Zuschauerkamera verwenden oder etwas "
+"völlig anderes rendern.\n"
+"Sie können zusätzliche Schnittstellen aktivieren, die derzeit nicht "
+"verwendet werden. Dies kann sinnvoll sein, wenn Sie Controller von anderen "
+"Plattformen verfolgen wollen. Zum jetzigen Zeitpunkt kann jedoch nur eine "
+"Schnittstelle auf ein HMD gerendert werden."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "Returns [code]true[/code] if the current output of this interface is in "
 "stereo."
 msgstr ""
+"Gibt [code]true[/code] zurück, wenn die aktuelle Ausgabe dieser "
+"Schnittstelle in Stereo ist."
 
 #: doc/classes/ARVRInterface.xml
 msgid "Turns the interface off."
-msgstr ""
+msgstr "Schaltet die Schnittstelle aus."
 
 #: doc/classes/ARVRInterface.xml
 msgid "On an AR interface, [code]true[/code] if anchor detection is enabled."
 msgstr ""
+"Auf einer AR-Schnittstelle: [code]true[/code], wenn die Ankererkennung "
+"aktiviert ist."
 
 #: doc/classes/ARVRInterface.xml
 msgid "[code]true[/code] if this interface been initialized."
-msgstr ""
+msgstr "[code]true[/code] wenn diese Schnittstelle initialisiert wurde."
 
 #: doc/classes/ARVRInterface.xml
 msgid "[code]true[/code] if this is the primary interface."
-msgstr ""
+msgstr "[code]true[/code], wenn dies die primäre Schnittstelle ist."
 
 #: doc/classes/ARVRInterface.xml
 msgid "No ARVR capabilities."
-msgstr ""
+msgstr "Keine ARVR-Fähigkeiten."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "This interface can work with normal rendering output (non-HMD based AR)."
 msgstr ""
+"Diese Schnittstelle kann mit normaler Rendering-Ausgabe arbeiten (nicht-HMD-"
+"basierte AR)."
 
 #: doc/classes/ARVRInterface.xml
 msgid "This interface supports stereoscopic rendering."
-msgstr ""
+msgstr "Diese Schnittstelle unterstützt das stereoskopische Rendering."
 
 #: doc/classes/ARVRInterface.xml
 msgid "This interface supports AR (video background and real world tracking)."
 msgstr ""
+"Diese Schnittstelle unterstützt AR (Video-Hintergrund und Real-World-"
+"Tracking)."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9976,6 +10786,12 @@ msgid ""
 "[method get_render_targetsize]). Using a separate viewport node frees up the "
 "main viewport for other purposes."
 msgstr ""
+"Diese Schnittstelle gibt die Daten an ein externes Gerät aus. Wird das "
+"Hauptansichtsfenster verwendet, ist die Bildschirmausgabe ein unveränderter "
+"Puffer entweder des linken oder des rechten Auges (gestreckt, wenn die Größe "
+"des Ansichtsfensters nicht auf das gleiche Seitenverhältnis von [method "
+"get_render_targetsize] geändert wird). Die Verwendung eines separaten "
+"Ansichtsfenster-Knotens macht das Hauptansichtfenster für andere Zwecke frei."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9983,50 +10799,67 @@ msgid ""
 "information for our camera node or when stereo scopic rendering is not "
 "supported."
 msgstr ""
+"Mono-Ausgabe, diese wird meist intern verwendet, wenn "
+"Positionierungsinformationen für unseren Kameraknoten abgerufen werden oder "
+"wenn das stereoskopische Rendering nicht unterstützt wird."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "Left eye output, this is mostly used internally when rendering the image for "
 "the left eye and obtaining positioning and projection information."
 msgstr ""
+"Die Ausgabe für das linke Auge wird hauptsächlich intern verwendet, um das "
+"Bild für das linke Auge zu rendern und Informationen zur Positionierung und "
+"Projektion zu erhalten."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "Right eye output, this is mostly used internally when rendering the image "
 "for the right eye and obtaining positioning and projection information."
 msgstr ""
+"Die Ausgabe für das rechte Auge wird hauptsächlich intern verwendet, um das "
+"Bild für das rechte Auge zu rendern und Informationen zur Positionierung und "
+"Projektion zu erhalten."
 
 #: doc/classes/ARVRInterface.xml
 msgid "Tracking is behaving as expected."
-msgstr ""
+msgstr "Das Tracking verhält sich wie erwartet."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "Tracking is hindered by excessive motion (the player is moving faster than "
 "tracking can keep up)."
 msgstr ""
+"Das Tracking wird durch übermäßige Bewegung behindert (der Spieler bewegt "
+"sich schneller, als die Verfolgung mithalten kann)."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "Tracking is hindered by insufficient features, it's too dark (for camera-"
 "based tracking), player is blocked, etc."
 msgstr ""
+"Das Tracking wird durch unzureichende Fähigkeiten behindert, es ist zu "
+"dunkel (für kamerabasiertes Tracking), der Spieler ist blockiert, usw."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "We don't know the status of the tracking or this interface does not provide "
 "feedback."
 msgstr ""
+"Wir kennen den Status der Nachverfolgung nicht, oder diese Schnittstelle "
+"gibt keine Rückmeldung."
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "Tracking is not functional (camera not plugged in or obscured, lighthouses "
 "turned off, etc.)."
 msgstr ""
+"Das Tracking funktioniert nicht (Kamera nicht eingesteckt oder verdeckt, "
+"Lighthouses ausgeschaltet usw.)."
 
 #: modules/gdnative/doc_classes/ARVRInterfaceGDNative.xml
 msgid "GDNative wrapper for an ARVR interface."
-msgstr ""
+msgstr "GDNative-Wrapper für eine ARVR-Schnittstelle."
 
 #: modules/gdnative/doc_classes/ARVRInterfaceGDNative.xml
 msgid ""
@@ -10034,10 +10867,14 @@ msgid ""
 "To use a GDNative ARVR interface, simply instantiate this object and set "
 "your GDNative library containing the ARVR interface implementation."
 msgstr ""
+"Dies ist eine Wrapper-Klasse für GDNative-Implementierungen der ARVR-"
+"Schnittstelle. Um eine GDNative-ARVR-Schnittstelle zu verwenden, "
+"instanziieren Sie einfach dieses Objekt und definieren Sie Ihre GDNative-"
+"Bibliothek, die die ARVR-Schnittstellenimplementierung enthält."
 
 #: doc/classes/ARVROrigin.xml
 msgid "The origin point in AR/VR."
-msgstr ""
+msgstr "Der Ursprungspunkt in AR/VR."
 
 #: doc/classes/ARVROrigin.xml
 msgid ""
@@ -10054,6 +10891,21 @@ msgid ""
 "be a child node of this car. Or, if you're implementing a teleport system to "
 "move your character, you should change the position of this node."
 msgstr ""
+"Dies ist ein spezieller Knoten innerhalb des AR/VR-Systems, der die "
+"physische Position des Zentrums unseres Tracking-Raums der virtuellen "
+"Position innerhalb unserer Spielwelt zuordnet.\n"
+"Es sollte nur einen dieser Knoten in Ihrer Szene geben und Sie müssen einen "
+"haben. Alle ARVRCamera-, ARVRController- und ARVRAnchor-Knoten sollten "
+"direkte Kinder dieses Knotens sein, damit das räumliche Tracking korrekt "
+"funktioniert.\n"
+"Es ist die Position dieses Knotens, die du aktualisierst, wenn dein "
+"Charakter sich durch deine Spielwelt bewegen muss, während wir uns in der "
+"realen Welt nicht bewegen. Die Bewegung in der realen Welt erfolgt immer in "
+"Bezug auf diesen Ursprungspunkt.\n"
+"Wenn deine Figur zum Beispiel ein Auto fährt, sollte der ARVROrigin-Knoten "
+"ein untergeordneter Knoten dieses Autos sein. Oder wenn du ein Teleport-"
+"System implementierst, um deinen Charakter zu bewegen, solltest du die "
+"Position dieses Knotens ändern."
 
 #: doc/classes/ARVROrigin.xml
 msgid ""
@@ -10061,10 +10913,14 @@ msgid ""
 "assume a scale of 1 game world unit = 1 real world meter.\n"
 "[b]Note:[/b] This method is a passthrough to the [ARVRServer] itself."
 msgstr ""
+"Ermöglicht es Ihnen, den Maßstab an die Einheiten Ihres Spiels anzupassen. "
+"Die meisten AR/VR-Plattformen gehen von einem Maßstab von 1 Einheit der "
+"Spielwelt = 1 Meter der realen Welt aus.\n"
+"[b]Hinweis:[/b] Diese Methode ist ein Passthrough zum [ARVRServer] selbst."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "A tracked object."
-msgstr ""
+msgstr "Ein getracktes Objekt."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid ""
@@ -10079,35 +10935,53 @@ msgid ""
 "hood objects that make this all work. These are mostly exposed so that "
 "GDNative-based interfaces can interact with them."
 msgstr ""
+"Eine Instanz dieses Objekts stellt ein Gerät dar, das verfolgt wird, z. B. "
+"einen Controller oder Ankerpunkt. HMDs werden hier nicht dargestellt, da sie "
+"intern gehandhabt werden.\n"
+"Wenn Controller eingeschaltet werden und die AR/VR-Schnittstelle sie "
+"erkennt, werden Instanzen dieses Objekts automatisch zur Liste der aktiven "
+"Tracking-Objekte hinzugefügt, die über den [ARVRServer] zugänglich sind.\n"
+"Der [ARVRController] und der [ARVRAnchor] verbrauchen beide Objekte dieses "
+"Typs und sollten in Ihrem Projekt verwendet werden. Die Positions-Tracker "
+"sind nur Objekte, die unter der Haube liegen und dafür sorgen, dass das "
+"alles funktioniert. Sie sind meist offengelegt, damit GDNative-basierte "
+"Schnittstellen mit ihnen interagieren können."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid ""
 "Returns the hand holding this tracker, if known. See [enum TrackerHand] "
 "constants."
 msgstr ""
+"Gibt die Hand zurück, die diesen Tracker hält, falls bekannt. Siehe [enum "
+"TrackerHand] Konstanten."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid ""
 "If this is a controller that is being tracked, the controller will also be "
 "represented by a joystick entry with this ID."
 msgstr ""
+"Wenn es sich um einen Controller handelt, der verfolgt wird, wird der "
+"Controller auch durch einen Joystick-Eintrag mit dieser ID dargestellt."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid ""
 "Returns the mesh related to a controller or anchor point if one is available."
 msgstr ""
+"Gibt das Netz zurück, das mit einem Controller oder Ankerpunkt verbunden "
+"ist, falls ein solcher vorhanden ist."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "Returns the controller or anchor point's name if available."
 msgstr ""
+"Gibt den Namen des Controllers oder des Ankerpunkts zurück, falls vorhanden."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "Returns the controller's orientation matrix."
-msgstr ""
+msgstr "Gibt die Orientierungsmatrix des Controllers zurück."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "Returns the world-space controller position."
-msgstr ""
+msgstr "Gibt die Position des Controllers im Raum zurück."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid ""
@@ -10115,60 +10989,75 @@ msgid ""
 "tracker type and matches the ID you need to specify for nodes such as the "
 "[ARVRController] and [ARVRAnchor] nodes."
 msgstr ""
+"Gibt die interne Tracker-ID zurück. Diese identifiziert den Tracker "
+"eindeutig pro Tracker-Typ und entspricht der ID, die Sie für Knoten wie die "
+"[ARVRController]- und [ARVRAnchor]-Knoten angeben müssen."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "Returns [code]true[/code] if this device tracks orientation."
 msgstr ""
+"Gibt [code]true[/code] zurück, wenn dieses Gerät die Ausrichtung verfolgt."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "Returns [code]true[/code] if this device tracks position."
 msgstr ""
+"Gibt [code]true[/code] zurück, wenn dieses Gerät die Position verfolgt."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "Returns the transform combining this device's orientation and position."
 msgstr ""
+"Gibt die Transformation zurück, die die Ausrichtung und Position dieses "
+"Geräts kombiniert."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "Returns the tracker's type."
-msgstr ""
+msgstr "Gibt den Typ des Tracker zurück."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid ""
 "The degree to which the tracker rumbles. Ranges from [code]0.0[/code] to "
 "[code]1.0[/code] with precision [code].01[/code]."
 msgstr ""
+"Der Grad, wie stark der Tracker wackelt. Der Bereich reicht von [code]0.0[/"
+"code] bis [code]1.0[/code] mit einer Genauigkeit von [code].01[/code]."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "The hand this tracker is held in is unknown or not applicable."
 msgstr ""
+"Die Hand, in der dieser Tracker gehalten wird, ist unbekannt oder nicht "
+"anwendbar."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "This tracker is the left hand controller."
-msgstr ""
+msgstr "Dieser Tracker ist der Controller für die linke Hand."
 
 #: doc/classes/ARVRPositionalTracker.xml
 msgid "This tracker is the right hand controller."
-msgstr ""
+msgstr "Dieser Tracker ist der Controller für die rechte Hand."
 
 #: doc/classes/ARVRServer.xml
 msgid "Server for AR and VR features."
-msgstr ""
+msgstr "Server für AR- und VR-Funktionen."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "The AR/VR server is the heart of our Advanced and Virtual Reality solution "
 "and handles all the processing."
 msgstr ""
+"Der AR/VR-Server ist das Herzstück unserer Advanced and Virtual Reality-"
+"Lösung und übernimmt die gesamte Verarbeitung."
 
 #: doc/classes/ARVRServer.xml
 msgid "Registers an [ARVRInterface] object."
-msgstr ""
+msgstr "Registriert ein [ARVRInterface]-Objekt."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "Registers a new [ARVRPositionalTracker] that tracks a spatial location in "
 "real space."
 msgstr ""
+"Registriert einen neuen [ARVRPositionalTracker], der eine räumliche Position "
+"im realen Raum verfolgt."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10192,11 +11081,34 @@ msgid ""
 "button on a controller for a short period of time, or when implementing a "
 "teleport mechanism."
 msgstr ""
+"Das ist eine wichtige Funktion, die man richtig verstehen muss. AR- und VR-"
+"Plattformen gehen alle etwas anders mit der Positionierung um.\n"
+"Bei Plattformen, die kein räumliches Tracking bieten, ist unser "
+"Ursprungspunkt (0,0,0) die Position unseres HMD, aber Sie haben wenig "
+"Kontrolle über die Richtung, in die der Spieler in der realen Welt blickt.\n"
+"Bei Plattformen, die räumliches Tracking bieten, hängt unser Ausgangspunkt "
+"sehr stark vom System ab. Bei OpenVR ist unser Ausgangspunkt in der Regel "
+"das Zentrum des Tracking-Raums, also auf dem Boden. Bei anderen Plattformen "
+"ist es oft die Position der Tracking-Kamera.\n"
+"Mit dieser Methode können Sie Ihren Tracker auf die Position des HMD "
+"zentrieren. Dabei wird die aktuelle Position des HMD verwendet, um alle "
+"Tracking-Daten anzupassen; im Wesentlichen wird die reale Welt an die "
+"aktuelle Position des Spielers in der Spielwelt angepasst.\n"
+"Damit diese Methode brauchbare Ergebnisse liefert, müssen Tracking-"
+"Informationen verfügbar sein. Dies dauert oft ein paar Frames nach dem Start "
+"des Spiels.\n"
+"Sie sollten diese Methode aufrufen, nachdem ein paar Sekunden vergangen "
+"sind. Zum Beispiel, wenn der Benutzer eine Neuausrichtung der Anzeige "
+"anfordert, indem er eine bestimmte Taste auf einem Controller für eine kurze "
+"Zeitspanne gedrückt hält, oder wenn er einen Teleportmechanismus "
+"implementiert."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "Clears our current primary interface if it is set to the provided interface."
 msgstr ""
+"Löscht unsere aktuelle primäre Schnittstelle, wenn sie auf die angegebene "
+"Schnittstelle eingestellt ist."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10204,15 +11116,20 @@ msgid ""
 "capabilities of an AR/VR platform, you can find the interface for that "
 "platform by name and initialize it."
 msgstr ""
+"Findet eine Schnittstelle anhand ihres Namens. Wenn Ihr Projekt z. B. die "
+"Funktionen einer AR/VR-Plattform nutzt, können Sie die Schnittstelle für "
+"diese Plattform anhand ihres Namens finden und sie initialisieren."
 
 #: doc/classes/ARVRServer.xml
 msgid "Returns the primary interface's transformation."
-msgstr ""
+msgstr "Gibt die Transformation der primären Schnittstelle zurück."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "Returns the interface registered at a given index in our list of interfaces."
 msgstr ""
+"Gibt die Schnittstelle zurück, die unter einem bestimmten Index in unserer "
+"Liste der Schnittstellen registriert ist."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10222,11 +11139,18 @@ msgid ""
 "try to initialize each interface and use the first one that returns "
 "[code]true[/code]."
 msgstr ""
+"Gibt die Anzahl der derzeit beim AR/VR-Server registrierten Schnittstellen "
+"zurück. Wenn Ihr Projekt mehrere AR/VR-Plattformen unterstützt, können Sie "
+"die verfügbaren Schnittstellen durchsehen und dem Benutzer entweder eine "
+"Auswahl präsentieren oder einfach versuchen, jede Schnittstelle zu "
+"initialisieren und die erste zu verwenden, die [code]true[/code] zurückgibt."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "Returns a list of available interfaces the ID and name of each interface."
 msgstr ""
+"Liefert eine Liste der verfügbaren Schnittstellen, die ID und den Namen "
+"jeder Schnittstelle."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10234,6 +11158,9 @@ msgid ""
 "the AR/VR eyes to [VisualServer]. The value comes from an internal call to "
 "[method OS.get_ticks_usec]."
 msgstr ""
+"Gibt den absoluten Zeitstempel (in μs) der letzten [ARVRServer]-Übertragung "
+"der AR/VR-Augen an [VisualServer] zurück. Der Wert stammt aus einem internen "
+"Aufruf der [Methode OS.get_ticks_usec]."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10241,6 +11168,9 @@ msgid ""
 "difference between [method get_last_commit_usec] and [method "
 "get_last_process_usec] when committing."
 msgstr ""
+"Gibt die Dauer (in μs) des letzten Frames zurück. Dies wird als Differenz "
+"zwischen [method get_last_commit_usec] und [method get_last_process_usec] "
+"beim Commit berechnet."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10248,46 +11178,55 @@ msgid ""
 "callback. The value comes from an internal call to [method OS."
 "get_ticks_usec]."
 msgstr ""
+"Gibt den absoluten Zeitstempel (in μs) des letzten [ARVRServer]-Prozess-"
+"Callbacks zurück. Der Wert stammt aus einem internen Aufruf der [Methode OS."
+"get_ticks_usec]."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "Returns the reference frame transform. Mostly used internally and exposed "
 "for GDNative build interfaces."
 msgstr ""
+"Gibt die Transformation des Referenzrahmens zurück. Wird meist intern "
+"verwendet und für GDNative-Build-Schnittstellen bereitgestellt."
 
 #: doc/classes/ARVRServer.xml
 msgid "Returns the positional tracker at the given ID."
-msgstr ""
+msgstr "Gibt den Positionstracker an der angegebenen ID zurück."
 
 #: doc/classes/ARVRServer.xml
 msgid "Returns the number of trackers currently registered."
-msgstr ""
+msgstr "Gibt die Anzahl der derzeit registrierten Tracker zurück."
 
 #: doc/classes/ARVRServer.xml
 msgid "Removes this interface."
-msgstr ""
+msgstr "Entfernt diese Schnittstelle."
 
 #: doc/classes/ARVRServer.xml
 msgid "Removes this positional tracker."
-msgstr ""
+msgstr "Entfernt diesen Positionstracker."
 
 #: doc/classes/ARVRServer.xml
 msgid "The primary [ARVRInterface] currently bound to the [ARVRServer]."
 msgstr ""
+"Das primäre [ARVRInterface], das derzeit an den [ARVRServer] gebunden ist."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "Allows you to adjust the scale to your game's units. Most AR/VR platforms "
 "assume a scale of 1 game world unit = 1 real world meter."
 msgstr ""
+"Ermöglicht es Ihnen, den Maßstab an die Einheiten Ihres Spiels anzupassen. "
+"Die meisten AR/VR-Plattformen gehen von einem Maßstab von 1 Einheit der "
+"Spielwelt = 1 Meter der realen Welt aus."
 
 #: doc/classes/ARVRServer.xml
 msgid "Emitted when a new interface has been added."
-msgstr ""
+msgstr "Wird ausgesendet, wenn eine neue Schnittstelle hinzugefügt wurde."
 
 #: doc/classes/ARVRServer.xml
 msgid "Emitted when an interface is removed."
-msgstr ""
+msgstr "Wird ausgesendet, wenn eine Schnittstelle entfernt wird."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10296,6 +11235,11 @@ msgid ""
 "important to react to this signal to add the appropriate [ARVRController] or "
 "[ARVRAnchor] nodes related to this new tracker."
 msgstr ""
+"Wird ausgesendet, wenn ein neuer Tracker hinzugefügt wurde. Wenn Sie keine "
+"feste Anzahl von Controllern verwenden oder wenn Sie [ARVRAnchor]s für eine "
+"AR-Lösung verwenden, ist es wichtig, auf dieses Signal zu reagieren, um die "
+"entsprechenden [ARVRController]- oder [ARVRAnchor]-Knoten für diesen neuen "
+"Tracker hinzuzufügen."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10305,30 +11249,36 @@ msgid ""
 "available (i.e. a new controller is switched on that takes the place of the "
 "previous one)."
 msgstr ""
+"Wird ausgesendet, wenn ein Tracker entfernt wird. Sie sollten alle "
+"[ARVRController]- oder [ARVRAnchor]-Punkte entfernen, falls zutreffend. Dies "
+"ist nicht zwingend erforderlich, die Knoten werden einfach inaktiv und "
+"werden wieder aktiv, wenn ein neuer Tracker verfügbar wird (d. h. ein neuer "
+"Controller wird eingeschaltet, der den vorherigen ersetzt)."
 
 #: doc/classes/ARVRServer.xml
 msgid "The tracker tracks the location of a controller."
-msgstr ""
+msgstr "Der Tracker tracktden Standort eines Controllers."
 
 #: doc/classes/ARVRServer.xml
 msgid "The tracker tracks the location of a base station."
-msgstr ""
+msgstr "Der Tracker trackt den Standort einer Basisstation."
 
 #: doc/classes/ARVRServer.xml
 msgid "The tracker tracks the location and size of an AR anchor."
-msgstr ""
+msgstr "Der Tracker trackt die Position und Größe eines AR-Ankers."
 
 #: doc/classes/ARVRServer.xml
 msgid "Used internally to filter trackers of any known type."
-msgstr ""
+msgstr "Wird intern verwendet, um Tracker jedes bekannten Typs zu filtern."
 
 #: doc/classes/ARVRServer.xml
 msgid "Used internally if we haven't set the tracker type yet."
 msgstr ""
+"Wird intern verwendet, wenn wir den Tracker-Typ noch nicht festgelegt haben."
 
 #: doc/classes/ARVRServer.xml
 msgid "Used internally to select all trackers."
-msgstr ""
+msgstr "Wird intern verwendet, um alle Tracker auszuwählen."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10336,22 +11286,32 @@ msgid ""
 "user is looking to in the real world. The user will look dead ahead in the "
 "virtual world."
 msgstr ""
+"Vollständige Rückstellung der Ausrichtung des HMD. Es spielt keine Rolle, in "
+"welche Richtung der Benutzer in der realen Welt schaut. Der Benutzer blickt "
+"in der virtuellen Welt genau nach vorne."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "Resets the orientation but keeps the tilt of the device. So if we're looking "
 "down, we keep looking down but heading will be reset."
 msgstr ""
+"Setzt die Ausrichtung zurück, behält aber die Neigung des Geräts bei. Wenn "
+"wir also nach unten schauen, schauen wir weiterhin nach unten, aber die "
+"Ausrichtung wird zurückgesetzt."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
 "Does not reset the orientation of the HMD, only the position of the player "
 "gets centered."
 msgstr ""
+"Die Ausrichtung des HMD wird nicht zurückgesetzt, nur die Position des "
+"Spielers wird zentriert."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid "Container that preserves its child controls' aspect ratio."
 msgstr ""
+"Container, der das Seitenverhältnis seiner untergeordneten Steuerelemente "
+"beibehält."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid ""
@@ -10360,6 +11320,11 @@ msgid ""
 "the container size is dynamic and the contents' size needs to adjust "
 "accordingly without losing proportions."
 msgstr ""
+"Ordnet untergeordnete Steuerelemente so an, dass ihr Seitenverhältnis "
+"automatisch erhalten bleibt, wenn die Größe des Containers geändert wird. "
+"Löst das Problem, dass die Größe des Containers dynamisch ist und die Größe "
+"des Inhalts entsprechend angepasst werden muss, ohne dass die Proportionen "
+"verloren gehen."
 
 #: doc/classes/AspectRatioContainer.xml doc/classes/BoxContainer.xml
 #: doc/classes/CenterContainer.xml doc/classes/Container.xml
@@ -10375,16 +11340,21 @@ msgstr "Tabulierter Container."
 #: doc/classes/AspectRatioContainer.xml
 msgid "Specifies the horizontal relative position of child controls."
 msgstr ""
+"Gibt die horizontale relative Position der untergeordneten Steuerelemente an."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid "Specifies the vertical relative position of child controls."
 msgstr ""
+"Gibt die vertikale relative Position der untergeordneten Steuerelemente an."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid ""
 "The aspect ratio to enforce on child controls. This is the width divided by "
 "the height. The ratio depends on the [member stretch_mode]."
 msgstr ""
+"Das Seitenverhältnis, das für untergeordnete Steuerelemente erzwungen werden "
+"soll. Dies ist die Breite geteilt durch die Höhe. Das Verhältnis hängt von "
+"dem [member stretch_mode] ab."
 
 #: doc/classes/AspectRatioContainer.xml
 #, fuzzy
@@ -10396,18 +11366,25 @@ msgid ""
 "The height of child controls is automatically adjusted based on the width of "
 "the container."
 msgstr ""
+"Die Höhe der untergeordneten Steuerelemente wird automatisch an die Breite "
+"des Containers angepasst."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid ""
 "The width of child controls is automatically adjusted based on the height of "
 "the container."
 msgstr ""
+"Die Breite der untergeordneten Steuerelemente wird automatisch an die Höhe "
+"des Containers angepasst."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid ""
 "The bounding rectangle of child controls is automatically adjusted to fit "
 "inside the container while keeping the aspect ratio."
 msgstr ""
+"Das Begrenzungsrechteck der untergeordneten Steuerelemente wird automatisch "
+"so angepasst, dass es in den Container passt, wobei das Seitenverhältnis "
+"beibehalten wird."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid ""
@@ -10418,25 +11395,38 @@ msgid ""
 "and [member Control.rect_clip_content] is enabled, this allows to show only "
 "the container's area restricted by its own bounding rectangle."
 msgstr ""
+"Die Breite und Höhe der untergeordneten Steuerelemente wird automatisch so "
+"angepasst, dass ihr Begrenzungsrechteck den gesamten Bereich des Containers "
+"abdeckt und das Seitenverhältnis beibehalten wird.\n"
+"Wenn das Begrenzungsrechteck der untergeordneten Steuerelemente die Größe "
+"des Containers überschreitet und [member Control.rect_clip_content] "
+"aktiviert ist, ermöglicht dies die Anzeige nur des Bereichs des Containers, "
+"der durch sein eigenes Begrenzungsrechteck begrenzt ist."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid ""
 "Aligns child controls with the beginning (left or top) of the container."
 msgstr ""
+"Richtet untergeordnete Steuerelemente am Anfang (links oder oben) des "
+"Containers aus."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid "Aligns child controls with the center of the container."
-msgstr ""
+msgstr "Richtet untergeordnete Steuerelemente an der Mitte des Containers aus."
 
 #: doc/classes/AspectRatioContainer.xml
 msgid "Aligns child controls with the end (right or bottom) of the container."
 msgstr ""
+"Richtet untergeordnete Steuerelemente am Ende (rechts oder unten) des "
+"Containers aus."
 
 #: doc/classes/AStar.xml
 msgid ""
 "An implementation of A* to find the shortest paths among connected points in "
 "space."
 msgstr ""
+"Eine Implementierung von A*, um die kürzesten Wege zwischen verbundenen "
+"Punkten im Raum zu finden."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10481,12 +11471,59 @@ msgid ""
 "[code]1.0[/code], then this equals the sum of Euclidean distances of all "
 "segments in the path."
 msgstr ""
+"A* ( A Star) ist ein Computeralgorithmus, der häufig bei der Pfadfindung und "
+"der Durchquerung von Graphen eingesetzt wird. Dabei werden kurze Pfade "
+"zwischen Vertices (Punkten) über eine bestimmte Menge von Kanten (Segmenten) "
+"gezeichnet. Aufgrund seiner Leistungsfähigkeit und Genauigkeit ist er weit "
+"verbreitet. Die A*-Implementierung von Godot verwendet standardmäßig Punkte "
+"im dreidimensionalen Raum und euklidische Abstände.\n"
+"Sie müssen Punkte manuell mit [method add_point] hinzufügen und Segmente "
+"manuell mit [method connect_points] erstellen. Anschließend können Sie mit "
+"der Funktion [method are_points_connected] prüfen, ob es einen Pfad zwischen "
+"zwei Punkten gibt, mit [method get_id_path] einen Pfad mit Indizes oder mit "
+"[method get_point_path] einen Pfad mit tatsächlichen Koordinaten erhalten.\n"
+"Es ist auch möglich, nicht-euklidische Distanzen zu verwenden. Erstellen Sie "
+"dazu eine Klasse, die [code]AStar[/code] erweitert und überschreiben Sie die "
+"Methoden [method _compute_cost] und [method _estimate_cost]. Beide nehmen "
+"zwei Indizes und geben eine Länge zurück, wie im folgenden Beispiel gezeigt "
+"wird.\n"
+"[codeblock]\n"
+"class MyAStar:\n"
+"    extends AStar\n"
+"\n"
+"    func _compute_cost(u, v):\n"
+"        return abs(u - v)\n"
+"\n"
+"    func _estimate_cost(u, v):\n"
+"        return min(0, abs(u - v) - 1)\n"
+"[/codeblock]\n"
+"Die [method_estimate_cost] sollte eine Untergrenze des Abstands zurückgeben, "
+"d.h. [code]_estimate_cost(u, v) <= _compute_cost(u, v)[/code]. Dies dient "
+"als Hinweis für den Algorithmus, da die benutzerdefinierten "
+"[code]_compute_cost[/code] möglicherweise sehr rechenintensiv sind. Wenn "
+"dies nicht der Fall ist, sollte [method _estimate_cost] denselben Wert wie "
+"[method _compute_cost] zurückgeben, um dem Algorithmus die genauesten "
+"Informationen zu liefern.\n"
+"Wenn die Standardmethoden [method _estimate_cost] und [method _compute_cost] "
+"verwendet werden oder wenn die mitgelieferte Methode [method _estimate_cost] "
+"eine untere Grenze der Kosten zurückgibt, dann sind die von A* "
+"zurückgegebenen Pfade die Pfade mit den niedrigsten Kosten. Dabei sind die "
+"Kosten eines Pfades gleich der Summe der [method _compute_cost]-Ergebnisse "
+"aller Segmente des Pfades multipliziert mit den [code]weight_scale[/code]s "
+"der Endpunkte der jeweiligen Segmente. Wenn die Standardmethoden verwendet "
+"werden und die [code]weight_scale[/code]s aller Punkte auf [code]1.0[/code] "
+"gesetzt werden, dann entspricht dies der Summe der euklidischen Abstände "
+"aller Segmente im Pfad."
 
 #: doc/classes/AStar.xml
 msgid ""
 "Called when computing the cost between two connected points.\n"
 "Note that this function is hidden in the default [code]AStar[/code] class."
 msgstr ""
+"Wird aufgerufen, wenn die Kosten zwischen zwei verbundenen Punkten berechnet "
+"werden.\n"
+"Beachten Sie, dass diese Funktion in der Standardklasse [code]AStar[/code] "
+"verborgen ist."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10494,6 +11531,10 @@ msgid ""
 "point.\n"
 "Note that this function is hidden in the default [code]AStar[/code] class."
 msgstr ""
+"Wird aufgerufen, wenn die Kosten zwischen einem Punkt und dem Endpunkt des "
+"Pfades geschätzt werden.\n"
+"Beachten Sie, dass diese Funktion in der Standardklasse [code]AStar[/code] "
+"verborgen ist."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10513,6 +11554,21 @@ msgid ""
 "If there already exists a point for the given [code]id[/code], its position "
 "and weight scale are updated to the given values."
 msgstr ""
+"Fügt einen neuen Punkt an der angegebenen Position mit dem angegebenen "
+"Bezeichner hinzu. Die [code]id[/code] muss 0 oder größer sein, und die "
+"[code]weight_scale[/code] muss 0,0 oder größer sein.\n"
+"Der [code]weight_scale[/code] wird mit dem Ergebnis von [method "
+"_compute_cost] multipliziert, um die Gesamtkosten der Reise über ein Segment "
+"von einem benachbarten Punkt zu diesem Punkt zu ermitteln. Unter sonst "
+"gleichen Bedingungen bevorzugt der Algorithmus also Punkte mit niedrigeren "
+"[code]weight_scale[/code]s, um einen Pfad zu bilden.\n"
+"[codeblock]\n"
+"var astar = AStar.new()\n"
+"astar.add_point(1, Vector3(1, 0, 0), 4) # Fügt den Punkt (1, 0, 0) mit "
+"weight_scale 4 und id 1 hinzu\n"
+"[/codeblock]\n"
+"Wenn es bereits einen Punkt für die angegebene [code]id[/code] gibt, werden "
+"seine Position und Gewichtung auf die angegebenen Werte aktualisiert"
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10520,10 +11576,14 @@ msgid ""
 "[code]bidirectional[/code] is [code]false[/code], returns whether movement "
 "from [code]id[/code] to [code]to_id[/code] is possible through this segment."
 msgstr ""
+"Gibt zurück, ob die beiden angegebenen Punkte direkt durch ein Segment "
+"verbunden sind. Wenn [code]bidirectional[/code] [code]false[/code] ist, wird "
+"zurückgegeben, ob eine Bewegung von [code]id[/code] nach [code]to_id[/code] "
+"durch dieses Segment möglich ist."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid "Clears all the points and segments."
-msgstr ""
+msgstr "Löscht alle Punkte und Segmente."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10537,6 +11597,16 @@ msgid ""
 "astar.connect_points(1, 2, false)\n"
 "[/codeblock]"
 msgstr ""
+"Erzeugt ein Segment zwischen den angegebenen Punkten. Wenn "
+"[code]bidirectional[/code] [code]false[/code] ist, ist nur die Bewegung von "
+"[code]id[/code] nach [code]to_id[/code] erlaubt, nicht die umgekehrte "
+"Richtung.\n"
+"[codeblock]\n"
+"var astar = AStar.new()\n"
+"astar.add_point(1, Vector3(1, 1, 0))\n"
+"astar.add_point(2, Vector3(0, 5, 0))\n"
+"astar.connect_points(1, 2, false)\n"
+"[/codeblock]"
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
@@ -10544,10 +11614,15 @@ msgid ""
 "is [code]false[/code], only movement from [code]id[/code] to [code]to_id[/"
 "code] is prevented, and a unidirectional segment possibly remains."
 msgstr ""
+"Löscht das Segment zwischen den angegebenen Punkten. Wenn "
+"[code]bidirectional[/code] [code]false[/code] ist, wird nur die Bewegung von "
+"[code]id[/code] nach [code]to_id[/code] verhindert, und es bleibt "
+"möglicherweise ein unidirektionales Segment übrig."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid "Returns the next available point ID with no point associated to it."
 msgstr ""
+"Gibt die nächste verfügbare Punkte-ID zurück, der kein Punkt zugeordnet ist."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
@@ -10558,6 +11633,12 @@ msgid ""
 "the one with the smallest ID will be returned, ensuring a deterministic "
 "result."
 msgstr ""
+"Gibt die ID des Punktes zurück, der [code]to_position[/code] am nächsten "
+"liegt, optional unter Berücksichtigung deaktivierter Punkte. Gibt [code]-1[/"
+"code] zurück, wenn es keine Punkte im Punktepool gibt.\n"
+"[b]Hinweis:[/b] Wenn mehrere Punkte der [code]to_position[/code] am nächsten "
+"liegen, wird der Punkt mit der kleinsten ID zurückgegeben, um ein "
+"deterministisches Ergebnis zu gewährleisten."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10574,6 +11655,19 @@ msgid ""
 "The result is in the segment that goes from [code]y = 0[/code] to [code]y = "
 "5[/code]. It's the closest position in the segment to the given point."
 msgstr ""
+"Gibt die nächstgelegene Position zu [code]to_position[/code] zurück, die "
+"sich innerhalb eines Segments zwischen zwei verbundenen Punkten befindet.\n"
+"[codeblock]\n"
+"var astar = AStar.new()\n"
+"astar.add_point(1, Vector3(0, 0, 0))\n"
+"astar.add_point(2, Vector3(0, 5, 0))\n"
+"astar.connect_points(1, 2)\n"
+"var res = astar.get_closest_position_in_segment(Vector3(3, 3, 0)) # Gibt (0, "
+"3, 0) zurück\n"
+"[/codeblock]\n"
+"Das Ergebnis liegt in dem Segment, das von [code]y = 0[/code] bis [code]y = "
+"5[/code] reicht. Es ist die Position im Segment, die dem angegebenen Punkt "
+"am nächsten liegt."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10598,12 +11692,34 @@ msgid ""
 "4, 3][/code] instead, because now even though the distance is longer, it's "
 "\"easier\" to get through point 4 than through point 2."
 msgstr ""
+"Gibt ein Array mit den IDs der Punkte zurück, die den von AStar gefundenen "
+"Pfad zwischen den angegebenen Punkten bilden. Das Array ist vom Startpunkt "
+"bis zum Endpunkt des Pfades geordnet.\n"
+"[codeblock]\n"
+"var astar = AStar.new()\n"
+"astar.add_point(1, Vector3(0, 0, 0))\n"
+"astar.add_point(2, Vector3(0, 1, 0), 1) # Standartgewichtung ist 1\n"
+"astar.add_point(3, Vector3(1, 1, 0))\n"
+"astar.add_point(4, Vector3(2, 0, 0))\n"
+"\n"
+"astar.connect_points(1, 2, false)\n"
+"astar.connect_points(2, 3, false)\n"
+"astar.connect_points(4, 3, false)\n"
+"astar.connect_points(1, 4, false)\n"
+"\n"
+"var res = astar.get_id_path(1, 3) # Gibt [1, 2, 3] zurück\n"
+"[/codeblock]\n"
+"Wenn du die Gewichtung des 2. Punktes auf 3 änderst, wird das Ergebnis "
+"stattdessen [code][1, 4, 3][/code] sein, weil es jetzt, obwohl die Strecke "
+"länger ist, \"einfacher\" ist, durch Punkt 4 zu kommen als durch Punkt 2."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
 "Returns the capacity of the structure backing the points, useful in "
 "conjunction with [code]reserve_space[/code]."
 msgstr ""
+"Gibt die Kapazität der Struktur zurück, in der die Punkte gespeichert sind, "
+"nützlich in Verbindung mit [code]reserve_space[/code]."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10622,10 +11738,25 @@ msgid ""
 "var neighbors = astar.get_point_connections(1) # Returns [2, 3]\n"
 "[/codeblock]"
 msgstr ""
+"Gibt ein Array mit den IDs der Punkte zurück, die die Verbindung mit dem "
+"angegebenen Punkt bilden.\n"
+"[codeblock]\n"
+"var astar = AStar.new()\n"
+"astar.add_point(1, Vector3(0, 0, 0))\n"
+"astar.add_point(2, Vector3(0, 1, 0))\n"
+"astar.add_point(3, Vector3(1, 1, 0))\n"
+"astar.add_point(4, Vector3(2, 0, 0))\n"
+"\n"
+"astar.connect_points(1, 2, true)\n"
+"astar.connect_points(1, 3, true)\n"
+"\n"
+"var neighbors = astar.get_point_connections(1) # Gibt [2, 3] zurück\n"
+"[/codeblock]"
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid "Returns the number of points currently in the points pool."
 msgstr ""
+"Gibt die Anzahl der Punkte zurück, die sich derzeit im Punktepool befinden."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10635,38 +11766,53 @@ msgid ""
 "[b]Note:[/b] This method is not thread-safe. If called from a [Thread], it "
 "will return an empty [PoolVector3Array] and will print an error message."
 msgstr ""
+"Gibt ein Array mit den Punkten zurück, die sich auf dem von AStar gefundenen "
+"Pfad zwischen den angegebenen Punkten befinden. Das Array ist vom Startpunkt "
+"bis zum Endpunkt des Pfades geordnet.\n"
+"[b]Hinweis:[/b] Diese Methode ist nicht thread-sicher. Wenn sie von einem "
+"[Thread] aufgerufen wird, gibt sie ein leeres [PoolVector3Array] zurück und "
+"gibt eine Fehlermeldung aus."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
 "Returns the position of the point associated with the given [code]id[/code]."
 msgstr ""
+"Gibt die Position des Punktes zurück, der mit der angegebenen [code]id[/"
+"code] verbunden ist."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
 "Returns the weight scale of the point associated with the given [code]id[/"
 "code]."
 msgstr ""
+"Gibt die Gewichtungsskala des Punktes zurück, der mit der angegebenen "
+"[code]id[/code] verbunden ist."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid "Returns an array of all points."
-msgstr ""
+msgstr "Gibt ein Array mit allen Punkten zurück."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
 "Returns whether a point associated with the given [code]id[/code] exists."
 msgstr ""
+"Gibt zurück, ob ein Punkt mit der angegebenen [code]id[/code] existiert."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
 "Returns whether a point is disabled or not for pathfinding. By default, all "
 "points are enabled."
 msgstr ""
+"Gibt zurück, ob ein Punkt für die Pfadfindung deaktiviert ist oder nicht. "
+"Standardmäßig sind alle Punkte aktiviert."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
 "Removes the point associated with the given [code]id[/code] from the points "
 "pool."
 msgstr ""
+"Entfernt den mit der angegebenen [code]id[/code] verbundenen Punkt aus dem "
+"Punktepool."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
@@ -10674,17 +11820,25 @@ msgid ""
 "you're adding a known large number of points at once, for a grid for "
 "instance. New capacity must be greater or equals to old capacity."
 msgstr ""
+"Reserviert intern Platz für [code]num_nodes[/code] Punkte, was nützlich ist, "
+"wenn Sie eine bekannt große Anzahl von Punkten auf einmal hinzufügen, z. B. "
+"für ein Gitter. Die neue Kapazität muss größer oder gleich der alten "
+"Kapazität sein."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
 "Disables or enables the specified point for pathfinding. Useful for making a "
 "temporary obstacle."
 msgstr ""
+"Deaktiviert oder aktiviert den angegebenen Punkt für die Pfadfindung. "
+"Nützlich für die Erstellung eines temporären Hindernisses."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
 "Sets the [code]position[/code] for the point with the given [code]id[/code]."
 msgstr ""
+"Setzt die [code]Position[/code] für den Punkt mit der angegebenen [code]id[/"
+"code]."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
@@ -10693,22 +11847,33 @@ msgid ""
 "_compute_cost] when determining the overall cost of traveling across a "
 "segment from a neighboring point to this point."
 msgstr ""
+"Setzt den [code]weight_scale[/code] für den Punkt mit der angegebenen "
+"[code]id[/code]. Der [code]weight_scale[/code] wird mit dem Ergebnis von "
+"[method _compute_cost] multipliziert, wenn die Gesamtkosten für die Reise "
+"über ein Segment von einem benachbarten Punkt zu diesem Punkt bestimmt "
+"werden."
 
 #: doc/classes/AStar2D.xml
 msgid "AStar class representation that uses 2D vectors as edges."
-msgstr ""
+msgstr "AStar-Klassendarstellung, die 2D-Vektoren als Kanten verwendet."
 
 #: doc/classes/AStar2D.xml
 msgid ""
 "This is a wrapper for the [AStar] class which uses 2D vectors instead of 3D "
 "vectors."
 msgstr ""
+"Dies ist ein Wrapper für die Klasse [AStar], die 2D-Vektoren anstelle von 3D-"
+"Vektoren verwendet."
 
 #: doc/classes/AStar2D.xml
 msgid ""
 "Called when computing the cost between two connected points.\n"
 "Note that this function is hidden in the default [code]AStar2D[/code] class."
 msgstr ""
+"Wird aufgerufen, wenn die Kosten zwischen zwei verbundenen Punkten berechnet "
+"werden.\n"
+"Beachten Sie, dass diese Funktion in der Standardklasse [code]AStar2D[/code] "
+"verborgen ist."
 
 #: doc/classes/AStar2D.xml
 msgid ""
@@ -10716,6 +11881,10 @@ msgid ""
 "point.\n"
 "Note that this function is hidden in the default [code]AStar2D[/code] class."
 msgstr ""
+"Wird aufgerufen, wenn die Kosten zwischen einem Punkt und dem Endpunkt des "
+"Pfades geschätzt werden.\n"
+"Beachten Sie, dass diese Funktion in der Standardklasse [code]AStar2D[/code] "
+"verborgen ist."
 
 #: doc/classes/AStar2D.xml
 msgid ""
@@ -10735,6 +11904,21 @@ msgid ""
 "If there already exists a point for the given [code]id[/code], its position "
 "and weight scale are updated to the given values."
 msgstr ""
+"Fügt einen neuen Punkt an der angegebenen Position mit dem angegebenen "
+"Bezeichner hinzu. Die [code]id[/code] muss 0 oder größer sein, und die "
+"[code]weight_scale[/code] muss 0,0 oder größer sein.\n"
+"Der [code]weight_scale[/code] wird mit dem Ergebnis von [method "
+"_compute_cost] multipliziert, um die Gesamtkosten der Reise über ein Segment "
+"von einem benachbarten Punkt zu diesem Punkt zu ermitteln. Unter sonst "
+"gleichen Bedingungen bevorzugt der Algorithmus also Punkte mit niedrigeren "
+"[code]weight_scale[/code]s, um einen Pfad zu bilden.\n"
+"[codeblock]\n"
+"var astar = AStar2D.new()\n"
+"astar.add_point(1, Vector2(1, 0), 4) # Fügt den Punkt (1, 0) mit "
+"weight_scale 4 und id 1 hinzu\n"
+"[/codeblock]\n"
+"Wenn für die angegebene [code]id[/code] bereits ein Punkt existiert, werden "
+"dessen Position und Gewichtungsskala auf die angegebenen Werte aktualisiert."
 
 #: doc/classes/AStar2D.xml
 msgid ""
@@ -10742,6 +11926,10 @@ msgid ""
 "[code]bidirectional[/code] is [code]false[/code], returns whether movement "
 "from [code]id[/code] to [code]to_id[/code] is possible through this segment."
 msgstr ""
+"Gibt zurück, ob es eine Verbindung/ein Segment zwischen den angegebenen "
+"Punkten gibt. Wenn [code]bidirectional[/code] [code]false[/code] ist, wird "
+"zurückgegeben, ob eine Bewegung von [code]id[/code] nach [code]to_id[/code] "
+"durch dieses Segment möglich ist."
 
 #: doc/classes/AStar2D.xml
 msgid ""
@@ -10755,6 +11943,16 @@ msgid ""
 "astar.connect_points(1, 2, false)\n"
 "[/codeblock]"
 msgstr ""
+"Erzeugt ein Segment zwischen den angegebenen Punkten. Wenn "
+"[code]bidirectional[/code] [code]false[/code] ist, ist nur die Bewegung von "
+"[code]id[/code] nach [code]to_id[/code] erlaubt, nicht die umgekehrte "
+"Richtung.\n"
+"[codeblock]\n"
+"var astar = AStar2D.new()\n"
+"astar.add_point(1, Vector2(1, 1))\n"
+"astar.add_point(2, Vector2(0, 5))\n"
+"astar.connect_points(1, 2, false)\n"
+"[/codeblock]"
 
 #: doc/classes/AStar2D.xml
 msgid ""
@@ -10771,6 +11969,19 @@ msgid ""
 "The result is in the segment that goes from [code]y = 0[/code] to [code]y = "
 "5[/code]. It's the closest position in the segment to the given point."
 msgstr ""
+"Gibt die nächstgelegene Position zu [code]to_position[/code] zurück, die "
+"sich innerhalb eines Segments zwischen zwei verbundenen Punkten befindet.\n"
+"[codeblock]\n"
+"var astar = AStar2D.new()\n"
+"astar.add_point(1, Vector2(0, 0))\n"
+"astar.add_point(2, Vector2(0, 5))\n"
+"astar.connect_points(1, 2)\n"
+"var res = astar.get_closest_position_in_segment(Vector2(3, 3)) # Gibt (0, 3) "
+"zurück\n"
+"[/codeblock]\n"
+"Das Ergebnis liegt in dem Segment, das von [code]y = 0[/code] bis [code]y = "
+"5[/code] reicht. Es ist die Position im Segment, die dem angegebenen Punkt "
+"am nächsten liegt."
 
 #: doc/classes/AStar2D.xml
 msgid ""
@@ -10795,6 +12006,26 @@ msgid ""
 "4, 3][/code] instead, because now even though the distance is longer, it's "
 "\"easier\" to get through point 4 than through point 2."
 msgstr ""
+"Gibt ein Array mit den IDs der Punkte zurück, die den von AStar2D gefundenen "
+"Pfad zwischen den angegebenen Punkten bilden. Das Array ist vom Startpunkt "
+"bis zum Endpunkt des Pfades geordnet.\n"
+"[codeblock]\n"
+"var astar = AStar2D.new()\n"
+"astar.add_point(1, Vector2(0, 0))\n"
+"astar.add_point(2, Vector2(0, 1), 1) # Standartgewichtung ist 1\n"
+"astar.add_point(3, Vector2(1, 1))\n"
+"astar.add_point(4, Vector2(2, 0))\n"
+"\n"
+"astar.connect_points(1, 2, false)\n"
+"astar.connect_points(2, 3, false)\n"
+"astar.connect_points(4, 3, false)\n"
+"astar.connect_points(1, 4, false)\n"
+"\n"
+"var res = astar.get_id_path(1, 3) # Gibt [1, 2, 3] zurück\n"
+"[/codeblock]\n"
+"Wenn du die Gewichtung des 2. Punktes auf 3 änderst, wird das Ergebnis "
+"stattdessen [code][1, 4, 3][/code] sein, weil es jetzt, obwohl die Strecke "
+"länger ist, \"einfacher\" ist, durch Punkt 4 zu kommen als durch Punkt 2."
 
 #: doc/classes/AStar2D.xml
 msgid ""
@@ -10813,6 +12044,20 @@ msgid ""
 "var neighbors = astar.get_point_connections(1) # Returns [2, 3]\n"
 "[/codeblock]"
 msgstr ""
+"Gibt ein Array mit den IDs der Punkte zurück, die die Verbindung mit dem "
+"angegebenen Punkt bilden.\n"
+"[codeblock]\n"
+"var astar = AStar2D.new()\n"
+"astar.add_point(1, Vector2(0, 0))\n"
+"astar.add_point(2, Vector2(0, 1))\n"
+"astar.add_point(3, Vector2(1, 1))\n"
+"astar.add_point(4, Vector2(2, 0))\n"
+"\n"
+"astar.connect_points(1, 2, true)\n"
+"astar.connect_points(1, 3, true)\n"
+"\n"
+"var neighbors = astar.get_point_connections(1) # Gibt [2, 3] zurück\n"
+"[/codeblock]"
 
 #: doc/classes/AStar2D.xml
 msgid ""
@@ -10822,11 +12067,19 @@ msgid ""
 "[b]Note:[/b] This method is not thread-safe. If called from a [Thread], it "
 "will return an empty [PoolVector2Array] and will print an error message."
 msgstr ""
+"Gibt ein Array mit den Punkten zurück, die sich auf dem von AStar2D "
+"gefundenen Pfad zwischen den angegebenen Punkten befinden. Das Array ist vom "
+"Startpunkt bis zum Endpunkt des Pfades geordnet.\n"
+"[b]Hinweis:[/b] Diese Methode ist nicht thread-sicher. Wenn sie von einem "
+"[Thread] aufgerufen wird, gibt sie ein leeres [PoolVector2Array] zurück und "
+"gibt eine Fehlermeldung aus."
 
 #: doc/classes/AtlasTexture.xml
 msgid ""
 "Crops out one part of a texture, such as a texture from a texture atlas."
 msgstr ""
+"Schneidet einen Teil einer Textur aus, z. B. eine Textur aus einem "
+"Texturatlas."
 
 #: doc/classes/AtlasTexture.xml
 msgid ""
@@ -10846,16 +12099,36 @@ msgid ""
 "FLAG_REPEAT] and [constant Texture.FLAG_MIRRORED_REPEAT] flags are ignored "
 "when using an AtlasTexture."
 msgstr ""
+"Ressource [Texture], die einen Teil der Textur [member atlas], definiert "
+"durch [member region], ausschneidet. Der Hauptanwendungsfall ist das "
+"Ausschneiden von Texturen aus einem Textur-Atlas, der eine große Texturdatei "
+"ist, die mehrere kleinere Texturen enthält. Besteht aus einer [Texture] für "
+"den [member atlas], einer [member region], die den zu verwendenden Bereich "
+"des [member atlas] definiert, und einem [member margin], der die Randbreite "
+"definiert.\n"
+"[AtlasTexture] kann nicht in einer [AnimatedTexture] verwendet werden, kann "
+"nicht in Knoten wie [TextureRect] gekachelt werden und funktioniert nicht "
+"ordnungsgemäß, wenn sie innerhalb von anderen [AtlasTexture]-Ressourcen "
+"verwendet wird. Mehrere [AtlasTexture]-Ressourcen können verwendet werden, "
+"um mehrere Texturen aus dem Atlas zu schneiden. Die Verwendung eines "
+"Texturatlasses hilft, die Videospeicherkosten und Renderaufrufe im Vergleich "
+"zur Verwendung mehrerer kleiner Dateien zu optimieren.\n"
+"[b]Hinweis:[/b] AtlasTexturen unterstützen keine Wiederholungen. Die Flags "
+"[constant Texture.FLAG_REPEAT] und [constant Texture.FLAG_MIRRORED_REPEAT] "
+"werden bei der Verwendung einer AtlasTextur ignoriert."
 
 #: doc/classes/AtlasTexture.xml
 msgid "The texture that contains the atlas. Can be any [Texture] subtype."
 msgstr ""
+"Die Textur, die den Atlas enthält. Kann ein beliebiger [Texture]-Subtyp sein."
 
 #: doc/classes/AtlasTexture.xml
 msgid ""
 "If [code]true[/code], clips the area outside of the region to avoid bleeding "
 "of the surrounding texture pixels."
 msgstr ""
+"Wenn [code]true[/code], wird der Bereich außerhalb der Region abgeschnitten, "
+"um ein Ausbluten der umliegenden Texturpixel zu vermeiden."
 
 #: doc/classes/AtlasTexture.xml
 msgid ""
@@ -10863,87 +12136,124 @@ msgid ""
 "(\"w\" and \"h\" in the editor) resizes the texture so it fits within the "
 "margin."
 msgstr ""
+"Der Rand um die Region. Der Parameter [member Rect2.size] von [Rect2] (\"w\" "
+"und \"h\" im Editor) ändert die Größe der Textur so, dass sie in den Rand "
+"passt."
 
 #: doc/classes/AtlasTexture.xml
 msgid "The AtlasTexture's used region."
-msgstr ""
+msgstr "Die verwendete Region der AtlasTextur."
 
 #: doc/classes/AudioBusLayout.xml
 msgid "Stores information about the audio buses."
-msgstr ""
+msgstr "Speichert Informationen über die Audiobusse."
 
 #: doc/classes/AudioBusLayout.xml
 msgid ""
 "Stores position, muting, solo, bypass, effects, effect position, volume, and "
 "the connections between buses. See [AudioServer] for usage."
 msgstr ""
+"Speichert Position, Stummschaltung, Solo, Bypass, Effekte, Effektposition, "
+"Lautstärke und die Verbindungen zwischen Bussen. Siehe [AudioServer] für die "
+"Verwendung."
 
 #: doc/classes/AudioEffect.xml
 msgid "Audio effect for audio."
-msgstr ""
+msgstr "Audioeffekt für Audio."
 
 #: doc/classes/AudioEffect.xml
 msgid ""
 "Base resource for audio bus. Applies an audio effect on the bus that the "
 "resource is applied on."
 msgstr ""
+"Basisressource für Audiobus. Wendet einen Audioeffekt auf den Bus an, auf "
+"den die Ressource angewendet wird."
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
-msgstr ""
+msgstr "Audio Mic Record Demo"
 
 #: doc/classes/AudioEffectAmplify.xml
 msgid ""
 "Adds an amplifying audio effect to an audio bus.\n"
 "Increases or decreases the volume of the selected audio bus."
 msgstr ""
+"Fügt einen verstärkenden Audioeffekt zu einem Audiobus hinzu.\n"
+"Erhöht oder verringert die Lautstärke des ausgewählten Audiobusses."
 
 #: doc/classes/AudioEffectAmplify.xml
 msgid "Increases or decreases the volume being routed through the audio bus."
-msgstr ""
+msgstr "Erhöht oder verringert die über den Audiobus geleitete Lautstärke."
 
 #: doc/classes/AudioEffectAmplify.xml
 msgid ""
 "Amount of amplification in decibels. Positive values make the sound louder, "
 "negative values make it quieter. Value can range from -80 to 24."
 msgstr ""
+"Betrag der Verstärkung in Dezibel. Positive Werte machen den Ton lauter, "
+"negative Werte machen ihn leiser. Der Wert kann von -80 bis 24 reichen."
 
 #: doc/classes/AudioEffectBandLimitFilter.xml
 msgid "Adds a band limit filter to the audio bus."
-msgstr ""
+msgstr "Fügt dem Audiobus einen Bandbegrenzungsfilter hinzu."
 
 #: doc/classes/AudioEffectBandLimitFilter.xml
 msgid ""
 "Limits the frequencies in a range around the [member AudioEffectFilter."
 "cutoff_hz] and allows frequencies outside of this range to pass."
 msgstr ""
+"Begrenzt die Frequenzen in einem Bereich um den [member AudioEffectFilter."
+"cutoff_hz] und lässt Frequenzen außerhalb dieses Bereichs passieren."
 
 #: doc/classes/AudioEffectBandPassFilter.xml
 msgid "Adds a band pass filter to the audio bus."
-msgstr ""
+msgstr "Fügt dem Audiobus einen Bandpassfilter hinzu."
 
 #: doc/classes/AudioEffectBandPassFilter.xml
 msgid ""
 "Attenuates the frequencies inside of a range around the [member "
 "AudioEffectFilter.cutoff_hz] and cuts frequencies outside of this band."
 msgstr ""
+"Dämpft die Frequenzen innerhalb eines Bereichs um den [member "
+"AudioEffectFilter.cutoff_hz] und schneidet Frequenzen außerhalb dieses "
+"Bereichs ab."
 
 #: doc/classes/AudioEffectCapture.xml
 msgid "Captures audio from an audio bus in real-time."
-msgstr ""
+msgstr "Nimmt Audio von einem Audiobus in Echtzeit auf."
 
 #: doc/classes/AudioEffectCapture.xml
+#, fuzzy
 msgid ""
 "AudioEffectCapture is an AudioEffect which copies all audio frames from the "
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+"AudioEffectCapture ist ein AudioEffect, der alle Audio-Frames vom "
+"angeschlossenen Audio-Effekt-Bus in seinen internen Ringpuffer kopiert.\n"
+"Der Anwendungscode sollte diese Audioframes aus diesem Ringpuffer mit der "
+"[method get_buffer] abrufen und nach Bedarf verarbeiten, z.B. um Daten von "
+"einem Mikrofon zu erfassen, anwendungsdefinierte Effekte zu implementieren "
+"oder um Audio über das Netzwerk zu übertragen. Wenn Audiodaten von einem "
+"Mikrofon aufgenommen werden, ist das Format der Samples Stereo 32-Bit "
+"Floating Point PCM."
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -10957,7 +12267,7 @@ msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
 msgid "Clears the internal ring buffer."
-msgstr ""
+msgstr "Löscht den internen Ringspeicher."
 
 #: doc/classes/AudioEffectCapture.xml
 msgid ""
@@ -10967,6 +12277,11 @@ msgid ""
 "samples if available, or an empty [PoolVector2Array] if insufficient data "
 "was available."
 msgstr ""
+"Ruft die nächsten [code]frames[/code] Audio-Samples aus dem internen "
+"Ringpuffer ab.\n"
+"Gibt ein [PoolVector2Array] zurück, das genau [code]frames[/code] Audio-"
+"Samples enthält, falls verfügbar, oder ein leeres [PoolVector2Array], falls "
+"nicht genügend Daten verfügbar waren."
 
 #: doc/classes/AudioEffectCapture.xml
 #, fuzzy
@@ -10978,11 +12293,15 @@ msgid ""
 "Returns the number of audio frames discarded from the audio bus due to full "
 "buffer."
 msgstr ""
+"Gibt die Anzahl der Audioframes zurück, die aufgrund eines vollen Puffers "
+"vom Audiobus verworfen wurden."
 
 #: doc/classes/AudioEffectCapture.xml
 msgid ""
 "Returns the number of frames available to read using [method get_buffer]."
 msgstr ""
+"Gibt die Anzahl der Bilder zurück, die mit der [methodget_buffer] gelesen "
+"werden können."
 
 #: doc/classes/AudioEffectCapture.xml
 #, fuzzy
@@ -10994,6 +12313,8 @@ msgid ""
 "Length of the internal ring buffer, in seconds. Setting the buffer length "
 "will have no effect if already initialized."
 msgstr ""
+"Länge des internen Ringpuffers, in Sekunden. Die Einstellung der Pufferlänge "
+"hat keine Auswirkungen, wenn sie bereits initialisiert ist."
 
 #: doc/classes/AudioEffectChorus.xml
 msgid "Adds a chorus audio effect."
@@ -11073,7 +12394,7 @@ msgstr ""
 
 #: doc/classes/AudioEffectCompressor.xml
 msgid "Gain applied to the output signal."
-msgstr ""
+msgstr "Auf das Ausgangssignal angewendete Verstärkung."
 
 #: doc/classes/AudioEffectCompressor.xml
 msgid ""
@@ -11190,12 +12511,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -11741,7 +13056,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -11902,12 +13222,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -12059,6 +13383,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 #, fuzzy
 msgid "MP3 audio stream driver."
@@ -12203,7 +13542,10 @@ msgstr "Spielt Audio in 2D."
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -13899,7 +15241,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -13992,7 +15334,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -14020,9 +15364,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -14529,13 +15873,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -14561,8 +15906,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14875,12 +16222,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14925,8 +16272,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14976,8 +16325,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -15039,7 +16391,8 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+#, fuzzy
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr "[CanvasItem] wird aufgefordert zu zeichnen."
 
 #: doc/classes/CanvasItem.xml
@@ -15174,7 +16527,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -18297,7 +19653,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -21065,7 +22423,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -21214,16 +22574,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -21369,18 +22730,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Liefert die Fläche des [Rect2i]."
@@ -26323,8 +27672,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -26949,7 +28302,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -28549,10 +29904,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -29994,8 +31352,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -32325,11 +33683,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -33178,7 +34539,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -33190,6 +34555,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -35609,14 +36984,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -35624,22 +36999,29 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
+"Entfernt den Punkt bei Index [code]Punkt[/code] aus dem Überblendungsbereich."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
+"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
+"Index [code]Dreieck[/code]."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -37219,9 +38601,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -37682,7 +39064,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -38846,7 +40230,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -39688,13 +41072,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41461,11 +42857,11 @@ msgstr "Gobale Position."
 
 #: doc/classes/Node2D.xml
 msgid "Global rotation in radians."
-msgstr ""
+msgstr "Globale Rotation im Bogenmaß."
 
 #: doc/classes/Node2D.xml
 msgid "Global rotation in degrees."
-msgstr ""
+msgstr "Globale Rotation in Grad."
 
 #: doc/classes/Node2D.xml
 msgid "Global scale."
@@ -41515,6 +42911,10 @@ msgid ""
 "VisualServer.CANVAS_ITEM_Z_MIN] and [constant VisualServer."
 "CANVAS_ITEM_Z_MAX] (inclusive)."
 msgstr ""
+"Z-Index. Legt fest, in welcher Reihenfolge die Nodes gerendert werde . Eine "
+"Node mit höherem Z-Index wird über anderen angezeigt. Wert muss zwischen "
+"[constant VisualServer.CANVAS_ITEM_Z_MIN] und [constant VisualServer."
+"CANVAS_ITEM_Z_MAX] liegen (einschließlich)."
 
 #: doc/classes/NodePath.xml
 msgid "Pre-parsed scene tree path."
@@ -43378,7 +44778,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -47933,7 +49335,7 @@ msgstr ""
 
 #: doc/classes/Polygon2D.xml
 msgid "The texture's rotation in degrees."
-msgstr ""
+msgstr "Die Rotation (Drehung) der Textur in Grad."
 
 #: doc/classes/Polygon2D.xml
 msgid ""
@@ -48857,7 +50259,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
 
 #: doc/classes/PopupMenu.xml
@@ -49099,7 +50503,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -49832,7 +51238,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -52520,8 +53930,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -56598,7 +58019,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -56745,13 +58168,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -57943,7 +59372,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -58574,6 +60006,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -58910,7 +60350,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -60362,7 +61804,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -61656,6 +63098,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -61717,6 +63162,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -61739,7 +63187,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -62892,6 +64343,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -62922,6 +64378,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -62963,8 +64424,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+#, fuzzy
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
+"Wird ausgegeben, wenn eine benutzerdefinierte Taste gedrückt wird. Siehe "
+"[method add_button]."
 
 #: doc/classes/Tabs.xml
 msgid "Emitted when a tab is clicked, even if it is the current tab."
@@ -67975,21 +69441,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -68002,7 +69472,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -68031,7 +69501,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -68041,22 +69543,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -68069,8 +69584,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -68268,16 +69785,16 @@ msgid "Unknown error."
 msgstr "unbekannter Fehler."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
-msgstr "UPNP Gerät."
+msgid "Universal Plug and Play (UPnP) device."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -77135,7 +78652,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/el.po b/doc/translations/el.po
index 87eee32604..2a2608c38f 100644
--- a/doc/translations/el.po
+++ b/doc/translations/el.po
@@ -548,8 +548,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -559,7 +560,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -613,7 +615,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -625,7 +628,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1040,10 +1044,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4855,19 +4864,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4888,21 +4899,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4912,9 +4927,10 @@ msgstr "Επιστρέφει την εφαπτομένη της παραμέτρ
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5566,9 +5582,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5742,8 +5758,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8745,8 +8761,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8797,10 +8814,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9043,12 +9070,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9594,7 +9615,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9755,12 +9781,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9908,6 +9938,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10048,7 +10093,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11728,7 +11776,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11821,7 +11869,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11849,9 +11899,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12352,13 +12402,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12384,8 +12435,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12698,12 +12751,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12748,8 +12801,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12797,8 +12852,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12860,7 +12918,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12985,7 +13043,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15981,7 +16042,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18712,7 +18775,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18861,16 +18926,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19016,18 +19082,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Επιστρέφει το τόξο ημιτόνου της παραμέτρου."
@@ -23942,8 +23996,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24564,7 +24622,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26152,10 +26212,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27564,8 +27627,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29867,11 +29930,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30717,7 +30783,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30729,6 +30799,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33089,14 +33169,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33104,22 +33184,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Επιστρέφει το ημίτονο της παραμέτρου."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Επιστρέφει το ημίτονο της παραμέτρου."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Επιστρέφει το ημίτονο της παραμέτρου."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Επιστρέφει το ημίτονο της παραμέτρου."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -34696,9 +34780,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35159,7 +35243,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36290,7 +36376,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37116,13 +37202,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40792,7 +40890,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46166,7 +46266,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Επιστρέφει το ημίτονο της παραμέτρου."
 
 #: doc/classes/PopupMenu.xml
@@ -46405,7 +46507,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47135,7 +47239,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49816,8 +49924,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53836,7 +53955,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53980,13 +54101,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55176,7 +55303,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55795,6 +55925,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56129,7 +56267,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57562,7 +57702,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58829,6 +58969,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58890,6 +59033,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58912,7 +59058,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60049,6 +60198,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Επιστρέφει το ημίτονο της παραμέτρου."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60079,6 +60233,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Επιστρέφει το ημίτονο της παραμέτρου."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60120,7 +60279,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65001,21 +65162,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65028,7 +65193,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65057,7 +65222,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65067,22 +65264,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65095,8 +65305,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65294,16 +65506,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73959,7 +74171,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/es.po b/doc/translations/es.po
index f9d008c41a..f44ab6b4bf 100644
--- a/doc/translations/es.po
+++ b/doc/translations/es.po
@@ -35,12 +35,13 @@
 # Jake-insane <jake0insane@gmail.com>, 2022.
 # Luis Alberto Flores Baca <betofloresbaca@gmail.com>, 2022.
 # emnrx <emanuelermancia@gmail.com>, 2022.
+# BlackNoizE404 <blacknoize404@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-06-16 18:58+0000\n"
-"Last-Translator: emnrx <emanuelermancia@gmail.com>\n"
+"PO-Revision-Date: 2022-08-31 03:18+0000\n"
+"Last-Translator: BlackNoizE404 <blacknoize404@gmail.com>\n"
 "Language-Team: Spanish <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/es/>\n"
 "Language: es\n"
@@ -48,7 +49,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -108,7 +109,7 @@ msgstr "(sobreescribe %s)"
 
 #: doc/tools/make_rst.py
 msgid "Default"
-msgstr "Por defecto"
+msgstr "Predeterminado"
 
 #: doc/tools/make_rst.py
 msgid "Setter"
@@ -523,7 +524,6 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Compares two values by checking their actual contents, recursing into any "
 "[Array] or [Dictionary] up to its deepest level.\n"
@@ -575,13 +575,12 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Converts a dictionary (previously created with [method inst2dict]) back to "
 "an instance. Useful for deserializing."
 msgstr ""
-"Convierte un diccionario (que fue creado previamente con [method inst2dict]) "
-"de nuevo en una instancia. Es útil para deserializar."
+"Convierte un diccionario (previamente creado con [method inst2dict]) de "
+"nuevo en una instancia. Es útil para deserializar."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 #, fuzzy
@@ -624,7 +623,6 @@ msgstr ""
 "avanzadas, utilice [Tween] o [AnimationPlayer]."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "The natural exponential function. It raises the mathematical constant [b]e[/"
 "b] to the power of [code]s[/code] and returns it.\n"
@@ -862,8 +860,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -873,7 +872,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "Devuelve un factor de interpolación o extrapolación, considerando el rango "
 "especificado en [code]from[/code] y [code]to[/code], y el valor interpolado "
@@ -967,7 +967,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -979,7 +980,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Interpola linealmente entre dos valores por un valor normalizado. Esto es la "
 "función inversa de [method inverse_lerp].\n"
@@ -1653,16 +1655,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Transforma un [code]value[/code] entre los rangos [code](istart, istop][/"
-"code] a los rangos [code][ostart, ostop][/code].\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Devuelve 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 #, fuzzy
@@ -6348,25 +6350,22 @@ msgstr ""
 "[AnimationRootNode]. Si no, el editor no mostrará el nodo para añadir."
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
-"Obtiene la leyenda del texto de este nodo (usado por algunos editores)."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
-"Obtiene un nodo hijo por índice (utilizado por los editores que heredan de "
-"[AnimationRootNode])."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
-"Ordena todos los nodos infantiles como un diccionario de [code]name: node[/"
-"code]. Sólo es útil cuando se hereda [AnimationRootNode]."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
@@ -6390,17 +6389,22 @@ msgstr ""
 "reutilizado en múltiples árboles."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 "Obtiene el valor por defecto de un parametro. Los parametros son "
 "personalizados en memoria local utilizados para tus nodos, dado que un "
 "recurso puede ser reutilizado en multiples arboles."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
@@ -6410,9 +6414,11 @@ msgstr ""
 "del [method Object.get_property_list]."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 "Devuelve [code]true[/code] si quieres que el editor del árbol de mezcla "
 "muestre la edición del filtro en este nodo."
@@ -6423,10 +6429,12 @@ msgid "Returns whether the given path is filtered."
 msgstr "Devuelve [code]true[/code] si un camino dado es filtrado."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -7259,9 +7267,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -7495,9 +7503,10 @@ msgstr ""
 "encuentra."
 
 #: doc/classes/AnimationPlayer.xml
+#, fuzzy
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 "Devuelve la [Animation] con clave [code]name[/code] or [code]null[/code] si "
 "no se encuentra."
@@ -11614,8 +11623,9 @@ msgstr ""
 "Recurso base para el bus de audio. Aplica un efecto de audio en el bus en "
 "que el recurso es aplicado."
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -11675,10 +11685,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -11989,12 +12009,6 @@ msgstr ""
 "los juegos, puede simular el sonido proveniente de algún dispositivo "
 "saturado o altavoz muy eficientemente."
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr "Poder de distorsión. El valor puede variar entre 0 y 1."
@@ -12709,10 +12723,13 @@ msgstr ""
 "[code]at_position[/code]."
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
-"Devuelve los nombres de todos los dispositivos de entrada de audio "
-"detectados en el sistema."
 
 #: doc/classes/AudioServer.xml
 msgid "Generates an [AudioBusLayout] using the available buses and effects."
@@ -12906,12 +12923,16 @@ msgstr "Número de buses de audio disponibles."
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -13070,6 +13091,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 #, fuzzy
 msgid "MP3 audio stream driver."
@@ -13228,7 +13264,10 @@ msgstr "Reproduce el sonido 3D en el espacio 3D."
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -15326,7 +15365,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 "Establece la proyección de la cámara en modo frustum (ver [constant "
 "PROJECTION_FRUSTUM]), especificando un [code]size[/code], un [code]offset[/"
@@ -15445,10 +15484,13 @@ msgstr ""
 "- ~121,63 grados en una vista de 21:9"
 
 #: doc/classes/Camera.xml
+#, fuzzy
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 "El desplazamiento de la cámara de frustum. Se puede cambiar desde el valor "
 "predeterminado para crear efectos de \"frustum inclinado\" como [url=https://"
@@ -15485,15 +15527,11 @@ msgstr ""
 "la cámara escala su tamaño percibido."
 
 #: doc/classes/Camera.xml
-#, fuzzy
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
-"El tamaño de la cámara se mide como la mitad de la anchura o la altura. Sólo "
-"aplicable en modo ortogonal. Dado que [member keep_aspect] se bloquea en el "
-"eje, [code]size[/code] establece la longitud del tamaño del otro eje."
 
 #: doc/classes/Camera.xml
 msgid "The vertical (Y) offset of the camera viewport."
@@ -16157,18 +16195,20 @@ msgid "Base class of anything 2D."
 msgstr "Clase base de cualquier cosa 2D."
 
 #: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
 "Base class of anything 2D. Canvas items are laid out in a tree; children "
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -16220,12 +16260,19 @@ msgid "Custom drawing in 2D"
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
-"Función sobreescribible llamada por el motor (si está definida) para dibujar "
-"el objeto canvas."
+"Llamado cuando el nodo entra en el [SceneTree] (por ejemplo, al instalarse, "
+"al cambiar de escena o después de llamar a [method add_child] en un script). "
+"Si el nodo tiene hijos, su llamada a [method _enter_tree] se llamará "
+"primero, y luego la de los hijos.\n"
+"Corresponde a la notificación [constant NOTIFICATION_ENTER_TREE] en [method "
+"Object._notification]."
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -16614,12 +16661,13 @@ msgstr ""
 "Devuelve [code]true[/code] si las notificaciones de transformación global se "
 "comunican a los hijos."
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 "Devuelve [code]true[/code] si el nodo está presente en el [SceneTree], su "
 "propiedad [member visible] es [code]true[/code] y todos sus antecedentes "
@@ -16682,12 +16730,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
-"Pone en la cola el [CanvasItem] para la actualización. La [constant "
-"NOTIFICATION_DRAW] será llamada en tiempo de inactividad para solicitar el "
-"redibujado."
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -16746,11 +16793,12 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
-"Emitido cuando el [CanvasItem] debe ser dibujado de nuevo. Esto sólo puede "
-"ser conectado en tiempo real, ya que en diferido no se podrá dibujar."
 
 #: doc/classes/CanvasItem.xml
 msgid "Emitted when becoming hidden."
@@ -16823,7 +16871,8 @@ msgstr ""
 "set_notify_local_transform]."
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+#, fuzzy
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr "Se solicita al [CanvasItem] que dibuje."
 
 #: doc/classes/CanvasItem.xml
@@ -16993,10 +17042,12 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
-"Establece la capa que sigue a la vista para simular un pseudo efecto 3D."
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
@@ -20889,10 +20940,10 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
-"Roba el foco de otro control y pasa a ser el control enfocado (ver [member "
-"focus_mode])."
 
 #: doc/classes/Control.xml
 #, fuzzy
@@ -24472,10 +24523,13 @@ msgid "A mathematic curve."
 msgstr "Una curva matemática."
 
 #: doc/classes/Curve.xml
+#, fuzzy
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 "Una curva que puede ser guardada y reutilizada para otros objetos. Por "
 "defecto, oscila entre [code]0[/code] y [code]1[/code] en el eje Y y "
@@ -24664,17 +24718,18 @@ msgstr ""
 "Mantiene un cacheo de puntos precalculados a lo largo de la curva, para "
 "acelerar los cálculos."
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 #, fuzzy
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 "Añade un punto a una curva en la posición [code]position[/code], con puntos "
 "de control [code]in[/code] y [code]out[/code].\n"
@@ -24907,27 +24962,6 @@ msgstr ""
 
 #: doc/classes/Curve3D.xml
 #, fuzzy
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-"Añade un punto a una curva en la posición [code]position[/code], con puntos "
-"de control [code]in[/code] y [code]out[/code].\n"
-"Si se da [code]at_position[/code], el punto se inserta antes del número de "
-"punto [code]at_position[/code], desplazando ese punto (y todos los puntos "
-"posteriores) después del punto insertado. Si no se da [code]at_position[/"
-"code], o es un valor ilegal ([code]at_position <0[/code] o [code]at_position "
-">= [method get_point_count][/code]), el punto se añadirá al final de la "
-"lista de puntos."
-
-#: doc/classes/Curve3D.xml
-#, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Devuelve el caché de puntos como un [PackedVector3Array]."
 
@@ -31644,11 +31678,13 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
-"Devuelve todo el archivo como una [String].\n"
-"El texto se interpreta como codificado en UTF-8."
 
 #: doc/classes/File.xml
 #, fuzzy
@@ -32413,13 +32449,16 @@ msgstr ""
 "Véase también [method CanvasItem.draw_string]."
 
 #: doc/classes/Font.xml
+#, fuzzy
 msgid ""
 "Draw character [code]char[/code] into a canvas item using the font at a "
 "given position, with [code]modulate[/code] color, and optionally kerning if "
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 "Dibuja el carácter [code]char[/code] en un elemento del canvas utilizando la "
 "fuente en una posición determinada, con [code]modular[/code] color, y "
@@ -34545,12 +34584,16 @@ msgstr ""
 "entre puntos de color definidos por el usuario."
 
 #: doc/classes/Gradient.xml
+#, fuzzy
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 "Dado un conjunto de colores, este recurso los interpolará en orden. Esto "
 "significa que si tiene el color 1, el color 2 y el color 3, la rampa "
@@ -36333,8 +36376,8 @@ msgstr "Cliente HTTP(Hyper-text transfer protocol)."
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -39548,11 +39591,14 @@ msgstr "Detiene la vibración del joypad."
 #: doc/classes/Input.xml
 #, fuzzy
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 "Vibración de los dispositivos Android e iOS.\n"
 "[b]Nota:[/b] Necesita permiso de VIBRATE para Android en la configuración de "
@@ -40668,7 +40714,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -40683,6 +40733,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -43795,44 +43855,40 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-"Añade un punto en la [code]position[/code]. Añade el punto al final de la "
-"línea.\n"
-"Si se da [code]at_position[/code], el punto se inserta antes del número de "
-"punto [code]at_position[/code], desplazando ese punto (y todos los puntos "
-"posteriores) después del punto insertado. Si no se da [code]at_position[/"
-"code], o es un valor ilegal ([code]at_position < 0[/code] o "
-"[code]at_position >= [method get_point_count][/code]), el punto se añadirá "
-"al final de la lista de puntos."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
+msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid "Removes all points from the line."
 msgstr "Elimina todos los puntos de la línea."
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr "Devuelve la cantidad de puntos de Line2D."
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Devuelve la cantidad de huesos del esqueleto."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr "Devuelve la posición del punto [code]i[/code]."
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Devuelve la posición del punto en el índice [code]point[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr "Elimina el punto en el índice [code]i[/code] de la línea."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 "Sobrescribe la posición en el punto [code]i[/code] con la [code]position[/"
 "code] suministrada."
@@ -45879,9 +45935,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 "MeshInstance es un nodo que toma un recurso [Mesh] y lo añade al escenario "
 "actual creando una instancia del mismo. Esta es la clase más usada para "
@@ -46463,7 +46519,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 "Establece el color de una instancia específica.\n"
 "Para que el color tenga efecto, asegúrate de que [member use_colors] es "
@@ -47819,7 +47877,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -48746,15 +48804,26 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
-#, fuzzy
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
-msgstr "Devuelve el estado actual de la conexión. Ver [enum ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
+msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 #, fuzzy
@@ -53930,7 +53999,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -61141,7 +61212,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Establece el icono del artículo en el índice [code]idx[/code]."
 
 #: doc/classes/PopupMenu.xml
@@ -61458,7 +61531,9 @@ msgstr "Clase para mostrar popups con un fondo de panel."
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 "Clase para mostrar popups con un fondo de panel. En algunos casos puede ser "
 "más simple de usar que el [Popup], ya que proporciona un fondo configurable. "
@@ -62393,10 +62468,12 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
-"Si [code]true[/code], se permitirá la entrada del micrófono. Esto requiere "
-"que se establezcan los permisos apropiados al exportar a Android o iOS."
 
 #: doc/classes/ProjectSettings.xml
 #, fuzzy
@@ -65582,8 +65659,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -70849,7 +70937,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 "Cambia la escena en curso a una nueva instancia de la [PackedScene] dada.\n"
 "Devuelve [constant OK] en el éxito o [constant ERR_CANT_CREATE] si la escena "
@@ -71044,18 +71134,20 @@ msgstr "La escena actual."
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
-"Si [code]true[/code], las formas de colisión serán visibles cuando se "
-"ejecute el juego desde el editor con fines de depuración."
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
-"Si [code]true[/code], los polígonos de navegación serán visibles cuando se "
-"ejecute el juego desde el editor para su depuración."
 
 #: doc/classes/SceneTree.xml
 msgid "The root of the edited scene."
@@ -72462,8 +72554,11 @@ msgstr ""
 "es específico para cada forma y no puede ser configurado."
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
-msgstr "La forma personalizada es un solucionador personalizado."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
+msgstr ""
 
 #: doc/classes/ShortCut.xml
 msgid "A shortcut for binding input."
@@ -73228,6 +73323,18 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+"Devuelve [code]true[/code] si el nodo está presente en el [SceneTree], su "
+"propiedad [member visible] es [code]true[/code] y todos sus antecedentes "
+"también son visibles. Si algún antecedente está oculto, este nodo no será "
+"visible en el árbol de la escena."
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -73673,7 +73780,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -75516,7 +75625,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -77083,6 +77192,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -77161,6 +77273,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -77195,11 +77310,15 @@ msgstr ""
 "en su lugar."
 
 #: doc/classes/String.xml
+#, fuzzy
 msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 "Divide la string en reales usando una string delimitadora y devuelve un "
 "array de las substrings..\n"
@@ -78701,6 +78820,11 @@ msgstr ""
 "está activada."
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Devuelve el texto del artículo en el índice [code]idx[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr "Devuelve el número de pestañas ocultas desplazadas a la izquierda."
 
@@ -78733,6 +78857,11 @@ msgstr ""
 "del ratón."
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Establece un icono para la pestaña en el índice [code]tab_idx[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 "Establece un icono [code]icon[/code] para la pestaña en el índice "
@@ -78790,9 +78919,12 @@ msgstr ""
 "ratón. Ver [member drag_to_rearrange_enabled]."
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+#, fuzzy
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
-"Se emite cuando se hace clic con el botón derecho del ratón en una pestaña."
+"Se emite cuando se presiona un botón personalizado. Ver [method add_button]."
 
 #: doc/classes/Tabs.xml
 msgid "Emitted when a tab is clicked, even if it is the current tab."
@@ -85082,21 +85214,25 @@ msgstr ""
 "sola."
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
-msgstr "Funciones de red de UPNP."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -85109,7 +85245,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -85138,7 +85274,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -85146,24 +85314,38 @@ msgid "Adds the given [UPNPDevice] to the list of discovered devices."
 msgstr "Añade el [UPNPDevice] dado a la lista de dispositivos descubiertos."
 
 #: modules/upnp/doc_classes/UPNP.xml
+#, fuzzy
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 "Añade un mapeo para reenviar el [code]port[/code] externo (entre 1 y 65535) "
@@ -85192,12 +85374,15 @@ msgid "Clears the list of discovered devices."
 msgstr "Borra la lista de dispositivos descubiertos."
 
 #: modules/upnp/doc_classes/UPNP.xml
+#, fuzzy
 msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 "Elimina la asignación de puertos para la combinación de puertos y protocolos "
 "dada en la pasarela por defecto (ver [method get_gateway]) si existe. "
@@ -85443,16 +85628,17 @@ msgid "Unknown error."
 msgstr "Error desconocido."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
-msgstr "Dispositivo UPNP."
+msgid "Universal Plug and Play (UPnP) device."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
+#, fuzzy
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 "Dispositivo UPNP. Véase [UPNP] para las funciones de descubrimiento y "
 "utilidad del UPNP. Proporciona un acceso de bajo nivel a los comandos de "
@@ -96678,8 +96864,13 @@ msgstr ""
 "dependencia cíclica, y permite que las referencias sean liberadas."
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
-msgstr "Devuelve el [Object] al que se refiere este weakref."
+#, fuzzy
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
+msgstr ""
+"Devuelve el valor inicial de la propiedad especificada. Devuelve [code]null[/"
+"code] si la propiedad no existe."
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
 msgid "Closes this data channel, notifying the other peer."
diff --git a/doc/translations/fa.po b/doc/translations/fa.po
index 7416d80072..4be9e9a8e1 100644
--- a/doc/translations/fa.po
+++ b/doc/translations/fa.po
@@ -16,12 +16,13 @@
 # Seyed Fazel Alavi <fazel8195@gmail.com>, 2022.
 # Giga hertz <gigahertzyt@gmail.com>, 2022.
 # ilia khormali <iliakhormaly1384@gmail.com>, 2022.
+# John Smith <pkafsharix@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-06-21 15:55+0000\n"
-"Last-Translator: ilia khormali <iliakhormaly1384@gmail.com>\n"
+"PO-Revision-Date: 2022-09-08 12:47+0000\n"
+"Last-Translator: John Smith <pkafsharix@gmail.com>\n"
 "Language-Team: Persian <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/fa/>\n"
 "Language: fa\n"
@@ -29,7 +30,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -77,11 +78,11 @@ msgstr "توضیحات ویژگی تم"
 
 #: doc/tools/make_rst.py
 msgid "Inherits:"
-msgstr ""
+msgstr "ارث می‌برد از:"
 
 #: doc/tools/make_rst.py
 msgid "Inherited By:"
-msgstr ""
+msgstr "ارث برده شده توسط:"
 
 #: doc/tools/make_rst.py
 msgid "(overrides %s)"
@@ -101,7 +102,7 @@ msgstr "مقدار"
 
 #: doc/tools/make_rst.py
 msgid "Getter"
-msgstr ""
+msgstr "گیرنده"
 
 #: doc/tools/make_rst.py
 msgid ""
@@ -119,16 +120,20 @@ msgstr ""
 msgid ""
 "This method accepts any number of arguments after the ones described here."
 msgstr ""
+"این متد هر تعداد آرگومان را پس از آنهایی که اینجا توضیح داده شده اند قبول "
+"می‌کند."
 
 #: doc/tools/make_rst.py
 msgid "This method is used to construct a type."
-msgstr ""
+msgstr "این متد برای ساختن یک تایپ استفاده میشود."
 
 #: doc/tools/make_rst.py
 msgid ""
 "This method doesn't need an instance to be called, so it can be called "
 "directly using the class name."
 msgstr ""
+"این متد برای صدا زده شدن نیازی به یک مورد ندارد، پس می‌تواند مستقیماً با "
+"استفاده از نام کلاس صدا زده شود."
 
 #: doc/tools/make_rst.py
 msgid ""
@@ -786,8 +791,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -797,7 +803,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -875,7 +882,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -887,7 +895,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "با یک مقدار نرمال شده بین دو مقدار درون یابی می کند. این مخالف [روش "
 "inverse_lerp] است.\n"
@@ -1460,10 +1469,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -5280,19 +5294,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5313,21 +5329,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5336,9 +5356,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5990,9 +6011,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6166,8 +6187,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -9169,8 +9190,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9221,10 +9243,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9466,12 +9498,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -10017,7 +10043,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10178,12 +10209,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10331,6 +10366,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10471,7 +10521,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12149,7 +12202,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12242,7 +12295,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12270,9 +12325,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12769,13 +12824,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12801,8 +12857,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13115,12 +13173,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13165,8 +13223,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13214,8 +13274,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13277,7 +13340,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13402,7 +13465,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16398,7 +16464,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19123,7 +19191,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19272,16 +19342,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19426,18 +19497,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -24344,8 +24403,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24965,7 +25028,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26549,10 +26614,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27959,8 +28027,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30260,11 +30328,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31109,7 +31180,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31121,6 +31196,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33478,14 +33563,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33493,21 +33578,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -35084,9 +35169,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35545,7 +35630,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36663,7 +36750,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37478,13 +37565,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41148,7 +41247,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46524,7 +46625,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46763,7 +46866,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47492,7 +47597,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -50173,8 +50282,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -51981,7 +52101,7 @@ msgstr ""
 
 #: doc/classes/Resource.xml
 msgid "Resources"
-msgstr ""
+msgstr "منابع"
 
 #: doc/classes/Resource.xml
 msgid ""
@@ -54195,7 +54315,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54339,13 +54461,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55535,7 +55663,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -56154,6 +56285,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56488,7 +56627,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57921,7 +58062,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59186,6 +59327,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59247,6 +59391,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59269,7 +59416,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60406,6 +60556,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60435,6 +60589,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60476,7 +60634,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65341,21 +65501,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65368,7 +65532,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65397,7 +65561,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65407,22 +65603,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65435,8 +65644,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65634,16 +65845,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74273,7 +74484,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/fi.po b/doc/translations/fi.po
index b1d940aa14..558873eb70 100644
--- a/doc/translations/fi.po
+++ b/doc/translations/fi.po
@@ -615,8 +615,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -626,7 +627,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -680,7 +682,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -692,7 +695,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1107,10 +1111,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4922,19 +4931,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4955,21 +4966,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4979,9 +4994,10 @@ msgstr "Palauttaa parametrin tangentin."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5633,9 +5649,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5809,8 +5825,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8818,8 +8834,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8870,10 +8887,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9116,12 +9143,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9667,7 +9688,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9828,12 +9854,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9981,6 +10011,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10121,7 +10166,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11802,7 +11850,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11895,7 +11943,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11923,9 +11973,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12427,13 +12477,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12459,8 +12510,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12773,12 +12826,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12823,8 +12876,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12872,8 +12927,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12935,7 +12993,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13060,7 +13118,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16057,7 +16118,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18788,7 +18851,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18937,16 +19002,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19092,18 +19158,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Palauttaa parametrin arkussinin."
@@ -24018,8 +24072,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24640,7 +24698,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26228,10 +26288,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27647,8 +27710,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29950,11 +30013,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30800,7 +30866,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30812,6 +30882,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33173,14 +33253,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33188,22 +33268,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Palauttaa kahden vektorin jäännöksen."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Laskee kahden vektorin ristitulon."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Laskee kahden vektorin ristitulon."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Laskee kahden vektorin ristitulon."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -34780,9 +34864,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35243,7 +35327,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36375,7 +36461,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37201,13 +37287,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40877,7 +40975,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46251,7 +46351,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Laskee kahden vektorin ristitulon."
 
 #: doc/classes/PopupMenu.xml
@@ -46490,7 +46592,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47220,7 +47324,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49901,8 +50009,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53921,7 +54040,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54065,13 +54186,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55261,7 +55388,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55881,6 +56011,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56215,7 +56353,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57649,7 +57789,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58916,6 +59056,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58977,6 +59120,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58999,7 +59145,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60136,6 +60285,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Laskee kahden vektorin ristitulon."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60166,6 +60320,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Laskee kahden vektorin ristitulon."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60207,7 +60366,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65091,21 +65252,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65118,7 +65283,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65147,7 +65312,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65157,22 +65354,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65185,8 +65395,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65384,16 +65596,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74056,7 +74268,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/fil.po b/doc/translations/fil.po
index 42ab5537f4..0f6a2d6ec6 100644
--- a/doc/translations/fil.po
+++ b/doc/translations/fil.po
@@ -549,8 +549,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -560,7 +561,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -614,7 +616,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -626,7 +629,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1041,10 +1045,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4855,19 +4864,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4888,21 +4899,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4911,9 +4926,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5565,9 +5581,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5741,8 +5757,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8744,8 +8760,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8796,10 +8813,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9041,12 +9068,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9592,7 +9613,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9753,12 +9779,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9906,6 +9936,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10046,7 +10091,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11724,7 +11772,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11817,7 +11865,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11845,9 +11895,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12344,13 +12394,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12376,8 +12427,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12690,12 +12743,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12740,8 +12793,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12789,8 +12844,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12852,7 +12910,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12977,7 +13035,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15973,7 +16034,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18698,7 +18761,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18847,16 +18912,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19001,18 +19067,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23919,8 +23973,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24540,7 +24598,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26124,10 +26184,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27534,8 +27597,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29835,11 +29898,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30684,7 +30750,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30696,6 +30766,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33053,14 +33133,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33068,21 +33148,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34659,9 +34739,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35120,7 +35200,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36232,7 +36314,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37047,13 +37129,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40717,7 +40811,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46081,7 +46177,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46320,7 +46418,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47049,7 +47149,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49730,8 +49834,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53748,7 +53863,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53892,13 +54009,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55088,7 +55211,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55707,6 +55833,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56041,7 +56175,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57474,7 +57610,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58739,6 +58875,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58800,6 +58939,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58822,7 +58964,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59959,6 +60104,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59988,6 +60137,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60029,7 +60182,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64894,21 +65049,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64921,7 +65080,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64950,7 +65109,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64960,22 +65151,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64988,8 +65192,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65187,16 +65393,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73826,7 +74032,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/fr.po b/doc/translations/fr.po
index 44d40e1bd5..22533d6b9a 100644
--- a/doc/translations/fr.po
+++ b/doc/translations/fr.po
@@ -61,7 +61,7 @@ msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-08-04 05:23+0000\n"
+"PO-Revision-Date: 2022-08-19 12:56+0000\n"
 "Last-Translator: Maxime Leroy <lisacintosh@gmail.com>\n"
 "Language-Team: French <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/fr/>\n"
@@ -632,8 +632,8 @@ msgstr ""
 "nombre à virgule flottante, avec des valeurs spécifiques conduisant aux "
 "comportements suivants:\n"
 "[codeblock]\n"
-"- Inférieur à -1.0 (exclus) : Plus lent au début et à la fin (\"ease in-out\""
-")\n"
+"- Inférieur à -1.0 (exclus) : Plus lent au début et à la fin (\"ease in-"
+"out\")\n"
 "- 1.0 : Linéaire\n"
 "- Entre -1.0 et 0.0 (exclus) : Plus rapide au début et à la fin (\"ease out-"
 "in\")\n"
@@ -876,6 +876,7 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Returns an interpolation or extrapolation factor considering the range "
 "specified in [code]from[/code] and [code]to[/code], and the interpolated "
@@ -883,8 +884,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -894,7 +896,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "Retourne le facteur d'interpolation ou d'extrapolation suivant l'intervalle "
 "spécifié dans [code]from[/code] et [code]to[/code], et la valeur interpolée "
@@ -985,12 +988,14 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Linearly interpolates between two values by the factor defined in "
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -1002,7 +1007,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "L'interpolation linéaire entre deux valeurs avec un facteur défini par "
 "[code]weight[/code]. Pour faire une interpolation, [code]weight[/code] doit "
@@ -1733,17 +1739,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Permet de trouver la valeur correspondante dans l'intervalle [code][ostart, "
-"ostop][/code] de la valeur [code]value[/code] appartenant à l'intervalle "
-"[code][istart, istop][/code].\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Renvoie la valeur 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1849,26 +1854,27 @@ msgid ""
 "-1.6521) return values[/url]"
 msgstr ""
 "Retourne le résultat de l'interpolation douce de la valeur [code]s[/code] "
-"entre [code]0[/code] et [code]1[/code], basée sur la position de "
-"[code]s[/code] entre [code]from[/code] et [code]to[/code].\n"
+"entre [code]0[/code] et [code]1[/code], basée sur la position de [code]s[/"
+"code] entre [code]from[/code] et [code]to[/code].\n"
 "La valeur retournée est [code]0[/code] si [code]s <= from[/code], et "
 "[code]1[/code] si [code]s >= to[/code]. Si [code]s[/code] se trouve entre "
 "[code]from[/code] et [code]to[/code], la valeur retournée suit une courbe en "
 "S qui représente les positions de [code]s[/code] entre[code]0[/code] et "
 "[code]1[/code].\n"
 "Cette courbe en S est l'interpolation cubique d'Hermite, obtenu par la "
-"fonction mathématique [code]f(y) = 3*y^2 - 2*y^3[/code] où [code]y = (x-from)"
-" / (to-from)[/code].\n"
+"fonction mathématique [code]f(y) = 3*y^2 - 2*y^3[/code] où [code]y = (x-"
+"from) / (to-from)[/code].\n"
 "[codeblock]\n"
 "smoothstep(0, 2, -5.0) # Retourne 0.0\n"
 "smoothstep(0, 2, 0.5) # Retourne 0.15625\n"
 "smoothstep(0, 2, 1.0) # Retourne 0.5\n"
 "smoothstep(0, 2, 2.0) # Retourne 1.0\n"
 "[/codeblock]\n"
-"Comparé à l'utilisateur [method ease] avec une valeur de courbe de [code]-1."
-"6521[/code], [method smoothstep] retourne la courbe la plus douce possible, "
-"sans changement brusque de dérivée. Si vous avez besoin d'effectuer des "
-"transitions plus avancées, utilisez [Tween] ou [AnimationPlayer].\n"
+"Comparé à l'utilisateur [method ease] avec une valeur de courbe de "
+"[code]-1.6521[/code], [method smoothstep] retourne la courbe la plus douce "
+"possible, sans changement brusque de dérivée. Si vous avez besoin "
+"d'effectuer des transitions plus avancées, utilisez [Tween] ou "
+"[AnimationPlayer].\n"
 "[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.4/img/"
 "smoothstep_ease_comparison.png]Comparaison entre les valeurs retournées par "
 "smoothstep() et ease(x, -1.6521)[/url]"
@@ -4008,7 +4014,6 @@ msgid "VR Controller analog trigger."
 msgstr "Gâchette analogique de la manette VR."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "VR Controller analog grip (side buttons)."
 msgstr "Bouton guide du contrôleur de jeu SDL."
 
@@ -6418,25 +6423,22 @@ msgstr ""
 "[AnimationRootNode], sinon les éditeurs n'afficheront pas le nœud pour ajout."
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
-msgstr "Obtient la légende pour ce nœud (utilisé par certains éditeurs)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
+msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
-"Obtient un nœud enfant par son index (utilisé par les éditeurs héritant "
-"d'[AnimationRootNode])."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
-"Obtient tous les nœuds enfants dans l'ordre en tant que dictionnaire "
-"[code]name: node[/code]. Utile uniquement lorsque [AnimationRootNode] est "
-"hérité."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
@@ -6460,17 +6462,22 @@ msgstr ""
 "réutilisé dans plusieurs arbres de nœuds."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 "Obtient la valeur par défaut d'un paramètre. Les paramètres sont la mémoire "
 "locale personnalisé utilisé pour vos nœuds, étant donné qu'une ressource "
 "peut être réutilisé dans plusieurs arbres de nœuds."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
@@ -6480,9 +6487,11 @@ msgstr ""
 "format est similaire à [method Object.get_property_list]."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 "Renvoie [code]true[/code] si vous souhaitez que l'éditeur de mélange d'arbre "
 "affiche l'édition de filtre sur ce nœud."
@@ -6492,10 +6501,12 @@ msgid "Returns whether the given path is filtered."
 msgstr "Retourne quand un chemin donné est filtré."
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -7317,13 +7328,14 @@ msgstr ""
 "court."
 
 #: doc/classes/AnimationNodeStateMachineTransition.xml
+#, fuzzy
 msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -7568,9 +7580,10 @@ msgstr ""
 "Retourne le nom de [code]animation[/code] ou un chaine vide si n'existe pas."
 
 #: doc/classes/AnimationPlayer.xml
+#, fuzzy
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 "Retourne le [Animation] avec la clé [code]name[/code] ou [code]null[/code] "
 "s'il n'est pas trouvé."
@@ -11868,8 +11881,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr "Démo d'enregistrement du microphone"
@@ -11928,12 +11942,22 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
+msgstr "Bus audio"
+
 #: doc/classes/AudioEffectCapture.xml
 msgid ""
 "Returns [code]true[/code] if at least [code]frames[/code] audio frames are "
@@ -12218,12 +12242,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr "Bus audio"
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr "L'intensité de la distorsion. Cette valeur est comprise entre 0 et 1."
@@ -12455,7 +12473,6 @@ msgid "Gain amount of the frequencies after the filter."
 msgstr "La valeur du gain de fréquences après le filtre."
 
 #: doc/classes/AudioEffectFilter.xml
-#, fuzzy
 msgid "Amount of boost in the frequency range near the cutoff frequency."
 msgstr ""
 "Quantité de boost dans les harmoniques près de la fréquence de coupure."
@@ -12906,9 +12923,13 @@ msgstr ""
 "[code]at_position[/code]."
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
-"Retourne le nom de tous les appareils d'entrée audio détectés par le système."
 
 #: doc/classes/AudioServer.xml
 msgid "Generates an [AudioBusLayout] using the available buses and effects."
@@ -13095,13 +13116,18 @@ msgid "Number of available audio buses."
 msgstr "Nombre de bus audio disponibles."
 
 #: doc/classes/AudioServer.xml
+#, fuzzy
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 "Le nom du périphérique actuel pour l'entrée audio (voir [method "
 "get_device_list)]. Sur les systèmes avec plusieurs entrées audio (comme "
@@ -13309,6 +13335,21 @@ msgstr ""
 "langages compilés avec GDNative, mais [method push_frame] peut être "
 "[i]moins[/i] efficace avec GDScript."
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr "Le pilote de flux audio MP3."
@@ -13462,8 +13503,12 @@ msgid "Plays positional sound in 2D space."
 msgstr "Joue un son localisé dans un espace 2D."
 
 #: doc/classes/AudioStreamPlayer2D.xml
+#, fuzzy
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -15631,7 +15676,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -15755,7 +15800,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -15788,14 +15835,10 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
-"La taille de la caméra mesurée comme la moitié de la largeur ou de la "
-"hauteur. N'est applicable qu'en modes orthogonal et frustum. Comme [member "
-"keep_aspect] verrouille l'axe, [code]size[/code] fixe la longueur de la "
-"taille sur l'autre axe."
 
 #: doc/classes/Camera.xml
 msgid "The vertical (Y) offset of the camera viewport."
@@ -16045,18 +16088,16 @@ msgid ""
 "Left margin needed to drag the camera. A value of [code]1[/code] makes the "
 "camera move only when reaching the edge of the screen."
 msgstr ""
-"La marge gauche nécessaire pour glisser la caméra. Une valeur de "
-"[code]1[/code] ne déplace la caméra que lorsqu'elle atteint le bord de "
-"l'écran."
+"La marge gauche nécessaire pour glisser la caméra. Une valeur de [code]1[/"
+"code] ne déplace la caméra que lorsqu'elle atteint le bord de l'écran."
 
 #: doc/classes/Camera2D.xml
 msgid ""
 "Right margin needed to drag the camera. A value of [code]1[/code] makes the "
 "camera move only when reaching the edge of the screen."
 msgstr ""
-"La marge droite nécessaire pour glisser la caméra. Une valeur de "
-"[code]1[/code] ne déplace la caméra que lorsqu'elle atteint le bord de "
-"l'écran."
+"La marge droite nécessaire pour glisser la caméra. Une valeur de [code]1[/"
+"code] ne déplace la caméra que lorsqu'elle atteint le bord de l'écran."
 
 #: doc/classes/Camera2D.xml
 msgid ""
@@ -16425,18 +16466,20 @@ msgid "Base class of anything 2D."
 msgstr "Classe de base de tout ce qui est 2D."
 
 #: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
 "Base class of anything 2D. Canvas items are laid out in a tree; children "
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -16488,10 +16531,19 @@ msgid "Custom drawing in 2D"
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
+"Appelé lorsque le nœud entre dans la [SceneTree] (par exemple en étant "
+"instancié, au changement de scène, ou après avoir appelé [method add_child] "
+"dans un script). Si le nœud a des enfants, sa méthode [méthod enter_tree] "
+"sera appelée d'abord, puis ensuite celle de ses enfants.\n"
+"Correspond à la notification [constant NOTIFICATION_ENTER_TREE] dans [method "
+"Object._notification]."
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -16637,7 +16689,6 @@ msgstr ""
 "avec anti-crénelage."
 
 #: doc/classes/CanvasItem.xml
-#, fuzzy
 msgid ""
 "Draws multiple disconnected lines with a uniform [code]width[/code] and "
 "segment-by-segment coloring. Colors assigned to line segments match by index "
@@ -16982,12 +17033,13 @@ msgstr ""
 "Retourne [code]true[/code] si les notification des transformations globales "
 "sont communiquées aux enfants."
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 "Retourne [code]true[/code] si le nœud est présent dans le [SceneTree], que "
 "sa propriété [member visible] est [code]true[/code] et que tous ses parents "
@@ -17055,11 +17107,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
-"Ajoute le [CanvasItem] pour être mis à jour. [constant NOTIFICATION_DRAW] "
-"sera émise sur le temps inoccupé pour demander la mise à jour."
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -17117,12 +17169,12 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
-"Émis lorsque le [CanvasItem] doit être redessiné. Ça ne peut être que "
-"connecté qu'en temps réel, puisque le différer peut ne pas permettre le "
-"dessin."
 
 #: doc/classes/CanvasItem.xml
 msgid "Emitted when becoming hidden."
@@ -17194,7 +17246,8 @@ msgstr ""
 "reçue que si elle est activée par [method set_notify_local_transform]."
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+#, fuzzy
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr "Le [CanvasItem] est demandé de dessiner."
 
 #: doc/classes/CanvasItem.xml
@@ -17348,7 +17401,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -19277,12 +19333,10 @@ msgid "Antique white color."
 msgstr "Couleur blanc antique."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Aqua color."
 msgstr "Couleur aqua."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Aquamarine color."
 msgstr "Couleur aigue-marine."
 
@@ -19363,7 +19417,6 @@ msgid "Dark cyan color."
 msgstr "Couleur cyan foncé."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Dark goldenrod color."
 msgstr "Couleur verge d'or foncé."
 
@@ -19436,7 +19489,6 @@ msgid "Dim gray color."
 msgstr "Couleur gris pâle."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Dodger blue color."
 msgstr "Couleur bleue Dodger."
 
@@ -19457,7 +19509,6 @@ msgid "Fuchsia color."
 msgstr "Couleur fuchsia."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Gainsboro color."
 msgstr "Couleur Gainsboro."
 
@@ -19470,7 +19521,6 @@ msgid "Gold color."
 msgstr "Couleur or."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Goldenrod color."
 msgstr "Couleur verge d'or."
 
@@ -19599,7 +19649,6 @@ msgid "Maroon color."
 msgstr "Couleur marron."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Medium aquamarine color."
 msgstr "Couleur bleu-marine moyenne."
 
@@ -19684,7 +19733,6 @@ msgid "Orchid color."
 msgstr "Couleur d’orchidée."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Pale goldenrod color."
 msgstr "Couleur verge d'or pâle."
 
@@ -19729,7 +19777,6 @@ msgid "Purple color."
 msgstr "Couleur violette."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Rebecca purple color."
 msgstr "Couleur violette Rebecca."
 
@@ -19766,7 +19813,6 @@ msgid "Seashell color."
 msgstr "Couleur coquillage."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Sienna color."
 msgstr "Couleur Sienne."
 
@@ -19807,7 +19853,6 @@ msgid "Teal color."
 msgstr "Couleur sarcelle."
 
 #: doc/classes/Color.xml
-#, fuzzy
 msgid "Thistle color."
 msgstr "Couleur chardon."
 
@@ -20259,7 +20304,6 @@ msgstr ""
 "Plus c'est haut, plus c'est rapide."
 
 #: doc/classes/ConeTwistJoint.xml doc/classes/PhysicsServer.xml
-#, fuzzy
 msgid ""
 "Defines, how fast the swing- and twist-speed-difference on both sides gets "
 "synced."
@@ -21405,10 +21449,10 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
-"Voler le focus d'un autre contrôle et devenir le contrôle focalisé (voir "
-"[member focus_mode])."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -22990,10 +23034,10 @@ msgid ""
 "variables, like [member anchor_left]. To change all 4 anchors at once, use "
 "[method set_anchors_preset]."
 msgstr ""
-"Magnétise l'un des 4 côtés d'ancrage à l'origine de l'ancrage "
-"[code]Rect[/code], en haut à gauche. Utilisez-le avec l'une des variables "
-"membres [code]anchor_*[/code], comme [member anchor_left]. Pour modifier les "
-"4 ancres à la fois, utilisez [method set_anchors_preset]."
+"Magnétise l'un des 4 côtés d'ancrage à l'origine de l'ancrage [code]Rect[/"
+"code], en haut à gauche. Utilisez-le avec l'une des variables membres "
+"[code]anchor_*[/code], comme [member anchor_left]. Pour modifier les 4 "
+"ancres à la fois, utilisez [method set_anchors_preset]."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -25097,10 +25141,13 @@ msgid "A mathematic curve."
 msgstr "Une courbe mathématique."
 
 #: doc/classes/Curve.xml
+#, fuzzy
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 "Une courbe qui peut être sauvegardée et réutilisée pour d'autres objets. Par "
 "défaut, elle va de [code]0[/code] à [code]1[/code] selon l'axe Y et les "
@@ -25286,26 +25333,28 @@ msgstr ""
 "Ça garde un cache des points calculés le long de la courbe, pour accélérer "
 "les calculs ultérieurs."
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
+#, fuzzy
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 "Ajoute un point à une courbe à la [code]position[/code] par rapport à la "
-"position de la [Curve2D], avec des points de contrôle d'entrée "
-"[code]in[/code] et de sortie [code]out[/code].\n"
+"position de la [Curve2D], avec des points de contrôle d'entrée [code]in[/"
+"code] et de sortie [code]out[/code].\n"
 "Si [code]at_position[/code] est spécifié, le point est inséré juste avant ce "
 "numéro de point [code]at_position[/code], en déplaçant ce point (et tous les "
-"autres points qui suivent) après le point inséré. Si [code]at_position[/code]"
-" n'est pas donné, ou est une valeur invalide ([code]at_position < 0[/code] "
-"ou [code]at_position >= [method get_point_count][/code]), le point sera "
-"ajouté en dernier."
+"autres points qui suivent) après le point inséré. Si [code]at_position[/"
+"code] n'est pas donné, ou est une valeur invalide ([code]at_position < 0[/"
+"code] ou [code]at_position >= [method get_point_count][/code]), le point "
+"sera ajouté en dernier."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
@@ -25520,27 +25569,6 @@ msgstr ""
 "accélérer de nouveaux calculs."
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-"Ajoute un point à la courbe à [code]position[/code] par rapport à la "
-"position [Curve3D], avec des points de contrôle [code]in[/code] et "
-"[code]out[/code].\n"
-"Si [code]at_position[/code] est spécifiée, le point est inséré avant le "
-"numéro de point [code]at_position[/code], deplaçant ce point (et tous les "
-"suivants) après le point inséré. Si [code]at_position[/code] n'est pas "
-"spécifiée, ou est une valeur invalide ([code]at_position <0[/code] ou "
-"[code]at_position >= [method get_point_count][/code]), le point sera ajouté "
-"à la fin de la liste des points."
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Retourne le cache de points sous forme de [PoolVector3Array]."
 
@@ -26418,8 +26446,8 @@ msgstr ""
 "Change le dossier actuellement ouvert par celui donné en argument. "
 "L'argument peut être relatif au répertoire actuel (par exemple "
 "[code]nouveau_dossier[/code] ou [code]./dossier[/code]), ou être un chemin "
-"absolu (par exemple [code]/tmp/dossier[/code] ou [code]res://parent/"
-"dossier[/code]).\n"
+"absolu (par exemple [code]/tmp/dossier[/code] ou [code]res://parent/dossier[/"
+"code]).\n"
 "Retourne une des constantes de code [enum Error] (et [code]OK[/code] en cas "
 "de succès)."
 
@@ -31794,7 +31822,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Environment.xml
-#, fuzzy
 msgid "The screen-space ambient occlusion color."
 msgstr "Le rayon d'occlusion ambiante de l'espace de l'écran primaire."
 
@@ -31852,7 +31879,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Environment.xml
-#, fuzzy
 msgid "The default exposure used for tonemapping."
 msgstr "L’exposition par défaut utilisée pour tonifier."
 
@@ -32292,11 +32318,13 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
-"Retourne le fichier complet en [String].\n"
-"Le texte est interprété comme étant encodé en UTF-8."
 
 #: doc/classes/File.xml
 msgid "Returns next [code]len[/code] bytes of the file as a [PoolByteArray]."
@@ -32959,7 +32987,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/FlowContainer.xml
-#, fuzzy
 msgid "Base class for flow containers."
 msgstr "La classe de base pour les conteneurs de flux."
 
@@ -33013,7 +33040,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -33984,20 +34013,19 @@ msgid ""
 msgstr ""
 "Gonfle ou dégonfle [code]polygon[/code] par la quantité [code]delta[/code] "
 "unités (pixels) dans toutes les directions. Si [code]delta[/code] est "
-"positif, le polygone décale chaque sommet vers l'extérieur. Si "
-"[code]delta[/code] est négatif, décale chaque sommet vers l'intérieur. "
-"Retourne une liste des polygones parce que gonflage/dégonflage peut produire "
-"plusieurs polygones distinctes. Retourne un tableau vide si "
-"[code]delta[/code] est négatif et la valeur absolue de celui-ci dépasse "
-"approximativement les dimensions du rectangle minimal englobant du polygone."
-"\n"
+"positif, le polygone décale chaque sommet vers l'extérieur. Si [code]delta[/"
+"code] est négatif, décale chaque sommet vers l'intérieur. Retourne une liste "
+"des polygones parce que gonflage/dégonflage peut produire plusieurs "
+"polygones distinctes. Retourne un tableau vide si [code]delta[/code] est "
+"négatif et la valeur absolue de celui-ci dépasse approximativement les "
+"dimensions du rectangle minimal englobant du polygone.\n"
 "Les sommets de chaque polygone sont arrondis suivant [code]join_type[/code], "
 "voir [enum PolyJoinType].\n"
 "L'opération peut fournir un polygone extérieur (la limite extérieure) et "
 "plusieurs polygones à intérieur (représentant les trous) qui pourraient être "
 "distingués en appelant [method is_polygon_clockwise].\n"
-"[b]Note :[/b] Pour transformer les sommets en polygone, utilisez la méthode ["
-"method Transform2D.xform]:\n"
+"[b]Note :[/b] Pour transformer les sommets en polygone, utilisez la méthode "
+"[method Transform2D.xform]:\n"
 "[codeblock]\n"
 "var polygon = PoolVector2Array([Vector2(0, 0), Vector2(100, 0), Vector2(100, "
 "100), Vector2(0, 100)])\n"
@@ -34030,8 +34058,8 @@ msgstr ""
 "vide.\n"
 "Les sommets de chaque polygone sont arrondis suivant [code]join_type[/code], "
 "voir [enum PolyJoinType].\n"
-"Chaque point d'extrémité du polygone sera arrondi suivant "
-"[code]end_type[/code], voir [enum PolyEndType].\n"
+"Chaque point d'extrémité du polygone sera arrondi suivant [code]end_type[/"
+"code], voir [enum PolyEndType].\n"
 "L'opération peut fournir un polygone extérieur (la limite extérieur) et "
 "plusieurs polygones à intérieur (représentant les trous) qui pourraient être "
 "distingués en appelant [method is_polygon_clockwise]."
@@ -34861,12 +34889,16 @@ msgstr ""
 "des couleurs entre des points de couleur définis par l'utilisateur."
 
 #: doc/classes/Gradient.xml
+#, fuzzy
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 "À partir d'un ensemble de couleurs, cette ressource les interpolera dans "
 "l'ordre. Cela signifie que si vous avez la couleur 1, la couleur 2 et la "
@@ -35581,8 +35613,8 @@ msgstr ""
 "[code]custom_left[/code]/[code]right[/code] est une texture personnalisée "
 "pour le port de ce côté.\n"
 "[b]Note :[/b] Cette méthode ne définit que les propriétés de l'emplacement. "
-"Pour créer l'emplacement, ajoutez un enfant dérivé de [Control] au GraphNode."
-"\n"
+"Pour créer l'emplacement, ajoutez un enfant dérivé de [Control] au "
+"GraphNode.\n"
 "Les propriétés individuelles peuvent être définies en utilisant l'une des "
 "méthodes [code]set_slot_*[/code]. Vous devez activer au moins un côté de "
 "l'emplacement pour le faire."
@@ -36245,7 +36277,6 @@ msgid "Horizontal version of [FlowContainer]."
 msgstr "La version horizontale du [FlowContainer]."
 
 #: doc/classes/HingeJoint.xml
-#, fuzzy
 msgid "A hinge between two 3D PhysicsBodies."
 msgstr "Une articulation de torsion entre deux corps 3D."
 
@@ -36503,7 +36534,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-#, fuzzy
 msgid "Used when the mouse hovers over the grabber."
 msgstr "Utilisé lorsque la souris survole le glisseur."
 
@@ -36615,11 +36645,12 @@ msgid "Low-level hyper-text transfer protocol client."
 msgstr "Client de protocole de transfert hypertexte de bas niveau."
 
 #: doc/classes/HTTPClient.xml
+#, fuzzy
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -37675,12 +37706,12 @@ msgstr ""
 "des fichiers ou du contenu web via HTTP.\n"
 "[b]Avertissement :[/b] Voir les notes et avertissements du [HTTPClient] pour "
 "les limites, notamment concernant la sécurité SSL.\n"
-"[b]Exemple pour contacter une API REST et afficher les champs retournés :[/b]"
-"\n"
+"[b]Exemple pour contacter une API REST et afficher les champs retournés :[/"
+"b]\n"
 "[codeblock]\n"
 "func _ready():\n"
-"    # Créer un nœud de requête HTTP et le connecter au signal de complétion."
-"\n"
+"    # Créer un nœud de requête HTTP et le connecter au signal de "
+"complétion.\n"
 "    var http_request = HTTPRequest.new()\n"
 "    add_child(http_request)\n"
 "    http_request.connect(\"request_completed\", self, "
@@ -37716,8 +37747,8 @@ msgstr ""
 "HTTPRequest:[/b]\n"
 "[codeblock]\n"
 "func _ready():\n"
-"    # Créer un nœud de requête HTTP et le connecter au signal de complétion."
-"\n"
+"    # Créer un nœud de requête HTTP et le connecter au signal de "
+"complétion.\n"
 "    var http_request = HTTPRequest.new()\n"
 "    add_child(http_request)\n"
 "    http_request.connect(\"request_completed\", self, "
@@ -39364,11 +39395,14 @@ msgstr "Arrête la vibration du joypad."
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -40298,7 +40332,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -40310,6 +40348,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -42409,8 +42457,8 @@ msgid ""
 msgstr ""
 "Définit la priorité de rendu pour la bordure du texte. Les objets les plus "
 "prioritaires seront affichés par-dessus des objets les moins prioritaires.\n"
-"[b]Note :[/b] Cela ne s'applique que si [member alpha_cut] est défini à ["
-"constant ALPHA_CUT_DISABLED] (c'est la valeur par défaut).\n"
+"[b]Note :[/b] Cela ne s'applique que si [member alpha_cut] est défini à "
+"[constant ALPHA_CUT_DISABLED] (c'est la valeur par défaut).\n"
 "[b]Note :[/b] Cela ne s'applique qu'au tri des objets transparents. Cela "
 "n'affectera pas la façon dont les objets transparents sont triés par rapport "
 "aux objets opaques. C'est parce que les objets opaques ne sont pas triés, "
@@ -42434,8 +42482,8 @@ msgid ""
 msgstr ""
 "Définit la priorité de rendu pour le texte. Les objets les plus prioritaires "
 "seront affichés par-dessus des objets les moins prioritaires.\n"
-"[b]Note :[/b] Cela ne s'applique que si [member alpha_cut] est défini à ["
-"constant ALPHA_CUT_DISABLED] (c'est la valeur par défaut).\n"
+"[b]Note :[/b] Cela ne s'applique que si [member alpha_cut] est défini à "
+"[constant ALPHA_CUT_DISABLED] (c'est la valeur par défaut).\n"
 "[b]Note :[/b] Cela ne s'applique qu'au tri des objets transparents. Cela "
 "n'affectera pas la façon dont les objets transparents sont triés par rapport "
 "aux objets opaques. C'est parce que les objets opaques ne sont pas triés, "
@@ -43121,44 +43169,40 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
-"Ajoute un point au [code]position[/code]. Ajoute le point à la fin de la "
-"ligne.\n"
-"Si [code]at_position[/code] est donné, le point est inséré avant l'indice "
-"[code]at_position[/code], en déplaçant ce point (et chaque point après) "
-"après le point inséré. Si [code]at_position[/code] n'est pas donné, ou est "
-"une valeur invalide ([code]at_position < 0[/code] ou [code]at_position >= "
-"[method get_point_count][/code]), le point sera ajouté à la fin de la liste "
-"des points."
 
 #: doc/classes/Line2D.xml
 msgid "Removes all points from the line."
 msgstr "Retire tous les points de la ligne."
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr "Renvoie le nombre de points de la Ligne2D."
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Retourne le nombre d'os dans ce squelette."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr "Renvoie la position du point [code]i[/code]."
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Retourne la position du point à l'index [code]point[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr "Supprime le point à l'index [code]i[/code] de la ligne."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 "Remplace la position du point [code]i[/code] par la [code]position[/code] "
 "spécifiée."
@@ -43262,8 +43306,8 @@ msgid ""
 "The texture used for the line's texture. Uses [code]texture_mode[/code] for "
 "drawing style."
 msgstr ""
-"La texture utilisée pour la texture de la ligne. Utilise "
-"[code]texture_mode[/code] pour le style de dessin."
+"La texture utilisée pour la texture de la ligne. Utilise [code]texture_mode[/"
+"code] pour le style de dessin."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -43572,22 +43616,22 @@ msgid ""
 "# `text_change_rejected` is emitted with \"bye\" as parameter.\n"
 "[/codeblock]"
 msgstr ""
-"La quantité maximale de caractères qui peuvent être entré dans ce "
-"[LineEdit]. Si [code]0[/code], il n'y a aucune limite.\n"
+"La quantité maximale de caractères qui peuvent être entré dans le "
+"[LineEdit]. Aucune limite si [code]0[/code].\n"
 "Quand une limite est définie, le texte est tronqué aux [member max_length] "
-"premiers caractères. Ça arrive pour le [member text] existant lorsque la "
-"longueur maximale est définie, ou quand un nouveau texte est inséré dans le "
+"premiers caractères. Cela s'applique au [member text] existant lorsque la "
+"longueur maximale est définie ou quand un nouveau texte est inséré dans le "
 "[LineEdit], en étant par exemple collé. Si le texte est tronqué, le signal "
 "[signal text_change_rejected] est émis avec le reste du texte tronqué passé "
 "en paramètre.\n"
-"[b]Example:[/b]\n"
+"[b]Exemple:[/b]\n"
 "[codeblock]\n"
 "text = \"Salut le monde\"\n"
 "max_length = 5\n"
 "# `text` est tronqué à \"Salut\".\n"
 "max_length = 11\n"
 "text += \" l'univers\"\n"
-"# `text` becomes \"Salut l'uni\".\n"
+"# `text` devient \"Salut l'uni\".\n"
 "# `text_change_rejected` est émis avec \"vers\" passé en paramètre.\n"
 "[/codeblock]"
 
@@ -44593,18 +44637,24 @@ msgid ""
 "Returns a [Material] in a given surface. Surface is rendered using this "
 "material."
 msgstr ""
+"Retourne le [Material] pour une surface donnée. Le rendu de la surface est "
+"fait en utilisant ce matériau."
 
 #: doc/classes/Mesh.xml
 msgid ""
 "Sets a [Material] for a given surface. Surface will be rendered using this "
 "material."
 msgstr ""
+"Définit un [Material] pour une surface donnée. Le rendu de la surface sera "
+"faite utilisant ce matériau."
 
 #: doc/classes/Mesh.xml
 msgid ""
 "Sets a hint to be used for lightmap resolution in [BakedLightmap]. Overrides "
 "[member BakedLightmap.default_texels_per_unit]."
 msgstr ""
+"Définit un indice à utiliser pour la résolution de la lightmap dans "
+"[BakedLightmap]. Surcharge [member BakedLightmap.default_texels_per_unit]."
 
 #: doc/classes/Mesh.xml
 msgid "Render array as points (one vertex equals one point)."
@@ -44616,11 +44666,13 @@ msgstr "Rend le tableau en ligne (une ligne est créée tous les deux sommets)."
 
 #: doc/classes/Mesh.xml
 msgid "Render array as line strip."
-msgstr ""
+msgstr "Fait le rendu du tableau comme une suite de lignes."
 
 #: doc/classes/Mesh.xml
 msgid "Render array as line loop (like line strip, but closed)."
 msgstr ""
+"Fait le rendu du tableau comme une boucle de ligne (une suite de lignes, "
+"mais fermée)."
 
 #: doc/classes/Mesh.xml
 msgid "Render array as triangles (every three vertices a triangle is created)."
@@ -44629,11 +44681,11 @@ msgstr ""
 
 #: doc/classes/Mesh.xml
 msgid "Render array as triangle strips."
-msgstr ""
+msgstr "Fait le rendu du tableau comme une suite de triangles."
 
 #: doc/classes/Mesh.xml
 msgid "Render array as triangle fans."
-msgstr ""
+msgstr "Fait le rendu du tableau comme un éventail de triangles."
 
 #: doc/classes/Mesh.xml doc/classes/VisualServer.xml
 msgid "Blend shapes are normalized."
@@ -44699,6 +44751,8 @@ msgstr ""
 #: doc/classes/Mesh.xml doc/classes/VisualServer.xml
 msgid "Flag used to mark a compressed (half float) normal array."
 msgstr ""
+"Le drapeau utilisé pour marquer que le tableau de normales est compressé "
+"(avec des demi-flottants)."
 
 #: doc/classes/Mesh.xml doc/classes/VisualServer.xml
 msgid "Flag used to mark a compressed (half float) tangent array."
@@ -44959,8 +45013,8 @@ msgid ""
 msgstr ""
 "Retourne le format du [Mesh]. Le format est un entier composé des drapeaux "
 "de format du [Mesh]. Par exemple, un maillage contenant à la fois des "
-"sommets et des normales retournerait un format de [code]3[/code] parce que ["
-"constant ArrayMesh.ARRAY_FORMAT_VERTEX] est [code]1[/code] et [constant "
+"sommets et des normales retournerait un format de [code]3[/code] parce que "
+"[constant ArrayMesh.ARRAY_FORMAT_VERTEX] est [code]1[/code] et [constant "
 "ArrayMesh.ARRAY_FORMAT_NORMAL] est [code]2[/code].\n"
 "Voir [enum ArrayMesh.ArrayFormat] pour une liste de drapeaux de format."
 
@@ -45069,13 +45123,14 @@ msgid "Node that instances meshes into a scenario."
 msgstr "Nœud qui instancie des meshes dans un scénario."
 
 #: doc/classes/MeshInstance.xml
+#, fuzzy
 msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 "MeshInstance est un nœud qui prend une ressource [Mesh] et l'ajoute au "
 "scénario actuel en créant une instance. C'est la classe la plus souvent "
@@ -45112,6 +45167,9 @@ msgid ""
 "This helper creates a [MeshInstance] child node with gizmos at every vertex "
 "calculated from the mesh geometry. It's mainly used for testing."
 msgstr ""
+"Cett aide crée un nœud [MeshInstance] enfant avec des manipulateur à chaque "
+"sommet calculé à partir de la géométrie de maillages. C'est principalement "
+"utilisé pour les essais."
 
 #: doc/classes/MeshInstance.xml
 msgid ""
@@ -45119,6 +45177,10 @@ msgid ""
 "[ConvexPolygonShape] collision shapes calculated from the mesh geometry via "
 "convex decomposition. It's mainly used for testing."
 msgstr ""
+"Cett aide crée un nœud [StaticBody] enfant avec plusieurs formes de "
+"collision [ConvexPolygonShape] calculées à partir de la géométrie de "
+"maillage via la décomposition de convexes. C'est principalement utilisé pour "
+"les essais."
 
 #: doc/classes/MeshInstance.xml
 msgid ""
@@ -45126,6 +45188,9 @@ msgid ""
 "collision shape calculated from the mesh geometry. It's mainly used for "
 "testing."
 msgstr ""
+"Cette aide crée un nœud [StaticBody] enfant avec une forme de collision "
+"[ConcavePolygonShape] calculée à partir de la géométrie de maillages. C'est "
+"principalement utilisé pour les essais."
 
 #: doc/classes/MeshInstance.xml
 msgid ""
@@ -45135,6 +45200,12 @@ msgid ""
 "[Material] defined in the [Mesh]. For example, if [member GeometryInstance."
 "material_override] is used, all surfaces will return the override material."
 msgstr ""
+"Retourne le [Material] qui sera utilisé par le [Mesh] lors de l'affichage. "
+"Ceci peut renvoyer le [member GeometryInstance.material_override], la "
+"surcharge de surface [Material] définie dans ce [MeshInstance], ou la "
+"surface [Material] définie dans le [Mesh]. Par exemple, si [member "
+"GeometryInstance.material_override] est utilisé, toutes les surfaces "
+"retourneront le matériau de surcharge."
 
 #: doc/classes/MeshInstance.xml
 msgid ""
@@ -45163,8 +45234,8 @@ msgid ""
 "each surface must match, in terms of material, attributes and vertex format."
 msgstr ""
 "Retourne [code]true[/code] si cette [MeshInstance] peut être fusionnée avec "
-"l'autre instance [code]other_mesh_instance[/code], en utilisant la fonction ["
-"method MeshInstance.merge_meshes].\n"
+"l'autre instance [code]other_mesh_instance[/code], en utilisant la fonction "
+"[method MeshInstance.merge_meshes].\n"
 "Pour pouvoir être fusionnées, les propriétés des [MeshInstance] doivent "
 "correspondre, et chaque surface doit correspondre, en termes de matériau, "
 "d'attributs et de format des sommets."
@@ -45256,6 +45327,11 @@ msgid ""
 "toolbar. Select the [Sprite] node, then choose [b]Sprite > Convert to "
 "MeshInstance2D[/b] at the top of the 2D editor viewport."
 msgstr ""
+"Le nœud utilisé pour afficher un [Mesh] en 2D. Un [MeshInstance2D] peut être "
+"automatiquement créé à partir d'un [Sprite] existant via un outil dans la "
+"barre d'outils d'éditeur. Sélectionnez le nœud [Sprite], puis choisissez "
+"[b]Sprite > Convertir en MeshInstance2D[/b] en haut de la fenêtre "
+"d'affichage 2D."
 
 #: doc/classes/MeshInstance2D.xml
 msgid "The [Mesh] that will be drawn by the [MeshInstance2D]."
@@ -45269,12 +45345,22 @@ msgid ""
 "Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
 "a comparison of normal map coordinates expected by popular engines."
 msgstr ""
+"La carte de normales qui sera utilisée si vous utilisez le "
+"[CanvasItemMaterial] par défaut.\n"
+"[b]Note :[/b] Godot s'attend à ce que la carte normale utilise les "
+"coordonnées X+, Y+ et Z+. Voir [url=http://wiki.polycount.com/wiki/"
+"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]cette page[/url] "
+"pour une comparaison des coordonnées des cartes de normales attendues par "
+"certains moteurs populaires."
 
 #: doc/classes/MeshInstance2D.xml doc/classes/MultiMeshInstance2D.xml
 msgid ""
 "The [Texture] that will be used if using the default [CanvasItemMaterial]. "
 "Can be accessed as [code]TEXTURE[/code] in CanvasItem shader."
 msgstr ""
+"La [Texture] qui sera utilisée si vous utilisez le [CanvasItemMaterial] par "
+"défaut. Peut être accédée via [code]TEXTURE[/code] dans le shader du "
+"CanvasItem."
 
 #: doc/classes/MeshInstance2D.xml doc/classes/MultiMeshInstance2D.xml
 msgid "Emitted when the [member texture] is changed."
@@ -45290,6 +45376,10 @@ msgid ""
 "and ID. Each item can also include collision and navigation shapes. This "
 "resource is used in [GridMap]."
 msgstr ""
+"Une bibliothèque de maillages. Contient une liste des ressources [Mesh], "
+"chacune avec un nom et un identifiant. Chaque article peut également inclure "
+"des formes de collision et de navigation. Cette ressource est utilisée dans "
+"[GridMap]."
 
 #: doc/classes/MeshLibrary.xml
 msgid "Clears the library."
@@ -45300,6 +45390,9 @@ msgid ""
 "Creates a new item in the library with the given ID.\n"
 "You can get an unused ID from [method get_last_unused_item_id]."
 msgstr ""
+"Crée un nouvel article dans la bibliothèque avec l'identifiant donné.\n"
+"Vous pouvez obtenir un identifiant inutilisé via [method "
+"get_last_unused_item_id]."
 
 #: doc/classes/MeshLibrary.xml
 msgid "Returns the first item with the given name."
@@ -45315,7 +45408,7 @@ msgstr "Retourne le maillage de l'élément."
 
 #: doc/classes/MeshLibrary.xml
 msgid "Returns the transform applied to the item's mesh."
-msgstr ""
+msgstr "Retourne la transformation appliquée au maillage de l'objet."
 
 #: doc/classes/MeshLibrary.xml
 msgid "Returns the item's name."
@@ -45338,12 +45431,20 @@ msgid ""
 "set_item_preview]. Returns an empty [Texture] if no preview was manually set "
 "in a running project."
 msgstr ""
+"Lors de l'exécution dans l'éditeur, retourne l'aperçu généré d'un élément "
+"(un rendu 3D dans la perspective isométrique). Lorsqu'il est utilisé dans un "
+"projet en cours d'exécution, retourne l'aperçu personnalisé de l'élément qui "
+"peut être défini en utilisant [method set_item_preview]. Retourne une "
+"[Texture] vide si aucun aperçu n'a été défini manuellement dans un projet en "
+"cours d'exécution."
 
 #: doc/classes/MeshLibrary.xml
 msgid ""
 "Returns an item's collision shapes.\n"
 "The array consists of each [Shape] followed by its [Transform]."
 msgstr ""
+"Retourne les formes de collision.\n"
+"Le tableau contient chaque [Shape] aussitôt suivie de sa [Transform]."
 
 #: doc/classes/MeshLibrary.xml
 msgid "Gets an unused ID for a new item."
@@ -45359,7 +45460,7 @@ msgstr "Définit le maillage de l'élément."
 
 #: doc/classes/MeshLibrary.xml
 msgid "Sets the transform to apply to the item's mesh."
-msgstr ""
+msgstr "Régle la transformation à appliquer au maillage de l'objet."
 
 #: doc/classes/MeshLibrary.xml
 msgid ""
@@ -45367,6 +45468,9 @@ msgid ""
 "This name is shown in the editor. It can also be used to look up the item "
 "later using [method find_item_by_name]."
 msgstr ""
+"Définit le nom de l'objet.\n"
+"Ce nom est indiqué dans l'éditeur. Il peut également être utilisé pour "
+"retrouver l'élément par la suite en utilisant [method find_item_by_name]."
 
 #: doc/classes/MeshLibrary.xml
 msgid "Sets the item's navigation mesh."
@@ -45379,7 +45483,7 @@ msgstr ""
 
 #: doc/classes/MeshLibrary.xml
 msgid "Sets a texture to use as the item's preview icon in the editor."
-msgstr ""
+msgstr "Définit la texture pour l'icône d'aperçu de l'élément dans l'éditeur."
 
 #: doc/classes/MeshLibrary.xml
 msgid ""
@@ -45388,6 +45492,10 @@ msgid ""
 "that will be applied to it. For shapes that should not have a transform, use "
 "[constant Transform.IDENTITY]."
 msgstr ""
+"Définit les formes de collision d'un objet.\n"
+"Le tableau doit être composé d'objets [Shape], chacun aussitôt suivi d'une "
+"[Transform] qui lui sera appliqué. Pour les formes qui ne devraient pas "
+"avoir une transformation, utilisez [constant Transform.IDENTITY]."
 
 #: doc/classes/MeshTexture.xml
 msgid "Simple texture that uses a mesh to draw itself."
@@ -45398,6 +45506,9 @@ msgid ""
 "Simple texture that uses a mesh to draw itself. It's limited because flags "
 "can't be changed and region drawing is not supported."
 msgstr ""
+"Une texture simple qui utilise un maillage pour se dessiner elle-même. C'est "
+"assez limité parce que les drapeaux ne peuvent pas être modifiés et que "
+"l'affichage uniquement de cette région n'est pas supporté."
 
 #: doc/classes/MeshTexture.xml
 msgid "Sets the base texture that the Mesh will use to draw."
@@ -45417,6 +45528,8 @@ msgstr ""
 msgid ""
 "Interpolates an abstract value and supplies it to a method called over time."
 msgstr ""
+"Interpole une valeur abstraite et la fournit à une méthode appelée dans le "
+"temps."
 
 #: doc/classes/MethodTweener.xml
 msgid ""
@@ -45428,6 +45541,13 @@ msgid ""
 "create [MethodTweener]. Any [MethodTweener] created manually will not "
 "function correctly."
 msgstr ""
+"[MethodTweener] est comme une combinaison de [CallbackTweener] et de "
+"[PropertyTweener]. Il appelle une méthode en fournissant une valeur "
+"interpolée comme paramètre. Voir [method SceneTreeTween.tween_method] pour "
+"plus d'informations d'utilisation.\n"
+"[b]Note :[/b] [method SceneTreeTween.tween_method] est le seul moyen correct "
+"de créer un [MethodTweener]. Tout [MethodTweener] créé manuellement ne "
+"fonctionnera pas correctement."
 
 #: doc/classes/MethodTweener.xml
 msgid ""
@@ -45442,6 +45562,9 @@ msgid ""
 "Sets the type of used easing from [enum Tween.EaseType]. If not set, the "
 "default easing is used from the [SceneTreeTween] that contains this Tweener."
 msgstr ""
+"Définit le type de comportement utilisé pour [enum Tween.EaseType]. Si n'est "
+"pas défini, le comportement par défaut sera celui utilisé dans le "
+"[SceneTreeTween] qui contient ce Tweener."
 
 #: doc/classes/MethodTweener.xml doc/classes/PropertyTweener.xml
 msgid ""
@@ -45449,6 +45572,9 @@ msgid ""
 "set, the default transition is used from the [SceneTreeTween] that contains "
 "this Tweener."
 msgstr ""
+"Définit le type de transition utilisée pour [enum Tween.TransitionType]. Si "
+"n'est pas définie, la transition par défaut sera celle utilisée dans le "
+"[SceneTreeTween] qui contient ce Tweener."
 
 #: modules/mobile_vr/doc_classes/MobileVRInterface.xml
 msgid "Generic mobile VR implementation."
@@ -45470,6 +45596,20 @@ msgid ""
 "    get_viewport().arvr = true\n"
 "[/codeblock]"
 msgstr ""
+"Il s'agit d'une implémentation VR mobile générique où vous devez fournir des "
+"détails sur le téléphone et le HMD utilisés. Il ne repose sur aucune "
+"bibliothèque existante. C'est l'interface la plus basique que nous avons. "
+"Pour un meilleur résultat, vous avez besoin d'un téléphone mobile avec un "
+"gyroscope et un accéléromètre intégrés.\n"
+"Notez que même s'il n'y a pas de suivi de la position, la caméra suppose que "
+"le casque est à une hauteur de 1.85 mètres. Vous pouvez changer cela en "
+"définissant [member eye_height].\n"
+"Vous pouvez initialiser cette interface ainsi :\n"
+"[codeblock]\n"
+"var interface = ARVRServer.find_interface(\"Native mobile\")\n"
+"if interface and interface.initialize():\n"
+"    get_viewport().arvr = true\n"
+"[/codeblock]"
 
 #: modules/mobile_vr/doc_classes/MobileVRInterface.xml
 msgid ""
@@ -45537,12 +45677,25 @@ msgid ""
 "Since instances may have any behavior, the AABB used for visibility must be "
 "provided by the user."
 msgstr ""
+"MultiMesh fournit un moyen d'instancier des maillages en bas niveau. "
+"L'affichage des milliers de nœuds [MeshInstance] peuvent être lent, puisque "
+"chaque objet est envoyé au GPU puis dessiné individuellement.\n"
+"MultiMesh est beaucoup plus rapide puisqu'il peut dessiner des milliers "
+"d'instances avec un seul appel, ce qui réduit la charge sur l'API.\n"
+"Un des inconvénients c'est que si les instances sont trop éloignées les unes "
+"des autres, les performances peuvent être réduites car chaque instance sera "
+"rendu individuellemen (elles sont indexés spatialement comme étant une "
+"seule, mais pour l'objet entier).\n"
+"Comme les instances peuvent avoir différents comportements, l'AABB utilisée "
+"pour la visibilité doit être fournie par l'utilisateur."
 
 #: doc/classes/MultiMesh.xml
 msgid ""
 "Returns the visibility axis-aligned bounding box in local space. See also "
 "[method VisualInstance.get_transformed_aabb]."
 msgstr ""
+"Retourne la boîte englobante, alignée sur les axes, de visibilité dans "
+"l'espace local. Voir aussi [method VisualInstance.get_transformed_aabb]."
 
 #: doc/classes/MultiMesh.xml
 msgid "Gets a specific instance's color."
@@ -45570,6 +45723,12 @@ msgid ""
 "used when initially placing an instance such as a bullet to prevent "
 "graphical glitches."
 msgstr ""
+"En utilisant [i]l'interpolation physique[/i], cette fonction vous permet "
+"d'empêcher l'interpolation sur une instance durant la trame physique "
+"actuelle.\n"
+"Cela vous permet de déplacer les instances instantanément, et devrait "
+"généralement être utilisé lors du placement initial d'une instance telle "
+"qu'une balle pour éviter les incohérences graphiques."
 
 #: doc/classes/MultiMesh.xml
 msgid ""
@@ -45619,12 +45778,15 @@ msgstr ""
 "l'interpolation."
 
 #: doc/classes/MultiMesh.xml
+#, fuzzy
 msgid ""
 "Sets the color of a specific instance by [i]multiplying[/i] the mesh's "
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 "Définit la couleur d'une instance spécifique en [i]multipliant[/i] les "
 "couleurs des sommets existants du maillage.\n"
@@ -45747,12 +45909,19 @@ msgid ""
 "8 bits can only represent values between 0 and 1, numbers outside that range "
 "will be clamped."
 msgstr ""
+"Compresse les données personnalisées en 8 bits pour les passer au shader. "
+"Cela utilise moins de mémoire et peut être plus rapide, mais réduit la "
+"précision et l'intervalle. Les flottans réduits à 8 bits ne peuvent "
+"représenter que des valeurs entre 0 et 1, les nombres en dehors de cet "
+"intervalle seront limités à ces valeurs."
 
 #: doc/classes/MultiMesh.xml
 msgid ""
 "The [Color] passed into [method set_instance_custom_data] will use 4 floats. "
 "Use this for highest precision."
 msgstr ""
+"La [Color] passée dans [method set_instance_custom_data] utilisera 4 "
+"flottants. Utilisez ce mode pour utiliser la plus haute précision possible."
 
 #: doc/classes/MultiMesh.xml
 msgid ""
@@ -45765,6 +45934,8 @@ msgid ""
 "Attempt to interpolate using Basis slerping (spherical linear interpolation) "
 "where possible, otherwise fall back to lerping."
 msgstr ""
+"Tente d'interpoler à l'aide de l'interpolation linéaire sphérique de Basis "
+"si possible, sinon utilise l'interpolation basique."
 
 #: doc/classes/MultiMeshInstance.xml
 msgid "Node that instances a [MultiMesh]."
@@ -45777,12 +45948,19 @@ msgid ""
 "This is useful to optimize the rendering of a high amount of instances of a "
 "given mesh (for example trees in a forest or grass strands)."
 msgstr ""
+"[MultiMeshInstance] est un nœud spécialisé pour l'instance de "
+"[GeometryInstance] basé sur une ressource [MultiMesh].\n"
+"Ceci est utile pour optimiser le rendu d'une grande quantité d'instances "
+"avec un maillage donné (par exemple des arbres dans une forêt ou des brins "
+"d'herbe)."
 
 #: doc/classes/MultiMeshInstance.xml
 msgid ""
 "The [MultiMesh] resource that will be used and shared among all instances of "
 "the [MultiMeshInstance]."
 msgstr ""
+"La ressource [MultiMesh] qui sera utilisée et partagée entre toutes les "
+"instances de la [MultiMeshInstance]."
 
 #: doc/classes/MultiMeshInstance2D.xml
 msgid "Node that instances a [MultiMesh] in 2D."
@@ -45825,12 +46003,16 @@ msgid ""
 "Clears the current MultiplayerAPI network state (you shouldn't call this "
 "unless you know what you are doing)."
 msgstr ""
+"Efface l'état actuel du réseau MultiplayerAPI (vous ne devriez pas appeler "
+"ceci à moins que vous ne sachiez ce que vous faites)."
 
 #: doc/classes/MultiplayerAPI.xml
 msgid ""
 "Returns the peer IDs of all connected peers of this MultiplayerAPI's [member "
 "network_peer]."
 msgstr ""
+"Retourne les identifiants de tous les pairs connectés à [member "
+"network_peer] de ce MultiplayerAPI."
 
 #: doc/classes/MultiplayerAPI.xml
 msgid ""
@@ -45844,6 +46026,9 @@ msgid ""
 "Returns the sender's peer ID for the RPC currently being executed.\n"
 "[b]Note:[/b] If not inside an RPC this method will return 0."
 msgstr ""
+"Retourne l'identification par les pairs de l'expéditeur pour le RPC en cours "
+"d'exécution.\n"
+"[b]Note :[/b] Si n'est à l'intérieur d'un RPC, cette méthode retournera 0."
 
 #: doc/classes/MultiplayerAPI.xml doc/classes/SceneTree.xml
 msgid "Returns [code]true[/code] if there is a [member network_peer] set."
@@ -45855,6 +46040,8 @@ msgid ""
 "Returns [code]true[/code] if this MultiplayerAPI's [member network_peer] is "
 "in server mode (listening for connections)."
 msgstr ""
+"Retourne [code]true[/code] si le [member network_peer] de ce MultiplayerAPI "
+"est en mode serveur (en attente de nouvelles connections)."
 
 #: doc/classes/MultiplayerAPI.xml
 msgid ""
@@ -45866,6 +46053,14 @@ msgid ""
 "will be executed in the same context of this function (e.g. [code]_process[/"
 "code], [code]physics[/code], [Thread])."
 msgstr ""
+"La méthode utilisée pour vérifier régulièrement le MultijoueurAPI. Vous "
+"n'avez qu'à vous soucier de cela si vous utilisez la surcharge [member Node."
+"custom_multiplayer] ou que vous définissez [member SceneTree."
+"multiplayer_poll] à [code]false[/code]. Par défaut, [SceneTree] polluera son "
+"MultijoueurAPI pour vous.\n"
+"[b]Note :[/b] Cette méthode permet d'appeler les RPC et RSET, de sorte "
+"qu'ils seront exécutés dans le même contexte de cette fonction (par "
+"exemple : [code]_process[/code], [code]physics[/code], [Thread])."
 
 #: doc/classes/MultiplayerAPI.xml
 msgid ""
@@ -45873,6 +46068,10 @@ msgid ""
 "[code]id[/code] (see [method NetworkedMultiplayerPeer.set_target_peer]). "
 "Default ID is [code]0[/code], i.e. broadcast to all peers."
 msgstr ""
+"Envoie le code brut [code]bytes[/code] à un pair spécifique identifié par "
+"[code]id[/code] (voir [method NetworkedMultiplayerPeer.set_target_peer]). "
+"L'identifiant par défaut est [code]0[/code], c'est-à-dire envoyé à tous les "
+"pairs."
 
 #: doc/classes/MultiplayerAPI.xml
 msgid ""
@@ -45983,6 +46182,9 @@ msgid ""
 "method or property for all RPC calls, making it unavailable. Default for all "
 "methods."
 msgstr ""
+"Utilisé avec [method Node.rpc_config] ou [method Node.rset_config] pour "
+"désactiver une méthode ou une propriété pour tous les appels RPC, la rendant "
+"indisponible. C'est la valeur par défaut pour toutes les méthodes."
 
 #: doc/classes/MultiplayerAPI.xml
 msgid ""
@@ -46025,8 +46227,8 @@ msgid ""
 "change locally. Analogous to the [code]remotesync[/code] keyword."
 msgstr ""
 "Se comporte comme [constant RPC_MODE_REMOTE] mais fait aussi l'appel ou le "
-"changement d'un propriété en local. Similaire au mot-clé "
-"[code]remotesync[/code]."
+"changement d'un propriété en local. Similaire au mot-clé [code]remotesync[/"
+"code]."
 
 #: doc/classes/MultiplayerAPI.xml
 msgid ""
@@ -46042,8 +46244,8 @@ msgid ""
 "change locally. Analogous to the [code]mastersync[/code] keyword."
 msgstr ""
 "Se comporte comme [constant RPC_MODE_MASTER] mais fait aussi l'appel ou le "
-"changement d'une propriété en local. Similaire au mot-clé "
-"[code]mastersync[/code]."
+"changement d'une propriété en local. Similaire au mot-clé [code]mastersync[/"
+"code]."
 
 #: doc/classes/MultiplayerAPI.xml
 msgid ""
@@ -46051,8 +46253,8 @@ msgid ""
 "change locally. Analogous to the [code]puppetsync[/code] keyword."
 msgstr ""
 "Se comporte comme [constant RPC_MODE_PUPPET] mais fait aussi l'appel ou le "
-"changement d'une propriété en local. Similaire au mot-clé "
-"[code]puppetsync[/code]."
+"changement d'une propriété en local. Similaire au mot-clé [code]puppetsync[/"
+"code]."
 
 #: doc/classes/Mutex.xml
 msgid "A synchronization mutex (mutual exclusion)."
@@ -46065,6 +46267,11 @@ msgid ""
 "that only one thread can ever acquire the lock at a time. A mutex can be "
 "used to protect a critical section; however, be careful to avoid deadlocks."
 msgstr ""
+"Un mutex de synchronisation (une exclusion mutuelle). Ceci est utilisé pour "
+"synchroniser plusieurs [Thread], et est équivalent à un [Semaphore] binaire. "
+"Il garantit qu'un seul fil d'exécution peut imposer un blocage à la fois. Un "
+"mutex peut être utilisé pour protéger une section critique ; cependant, "
+"soyez prudent pour éviter le blocage total de l'exécution."
 
 #: doc/classes/Mutex.xml
 msgid ""
@@ -46072,6 +46279,10 @@ msgid ""
 "[b]Note:[/b] This function returns without blocking if the thread already "
 "has ownership of the mutex."
 msgstr ""
+"Verrouille ce [Mutex], le bloque jusqu'à ce qu'il soit déverrouillé par le "
+"propriétaire actuel.\n"
+"[b]Note :[/b] Cette fonction retourne sans bloquer si ce fil d'exécution est "
+"déjà le propriétaire du mutex."
 
 #: doc/classes/Mutex.xml
 msgid ""
@@ -46092,6 +46303,11 @@ msgid ""
 "times while already having ownership of the mutex, it must also call [method "
 "unlock] the same number of times in order to unlock it correctly."
 msgstr ""
+"Débloque ce [Mutex], le laissant à d'autres fils d'exécution.\n"
+"[b]Note :[/b] Si un fil d'exécution a appelé [method lock] ou [method "
+"try_lock] plusieurs fois en étant déjà propriétaire du mutex, il doit "
+"également appeler [method unlock] un nombre de fois identifique pour le "
+"déverrouiller correctement."
 
 #: modules/gdnative/doc_classes/NativeScript.xml
 msgid ""
@@ -46133,10 +46349,15 @@ msgid ""
 "passed to the native constructor function. This will change with in a future "
 "API extension."
 msgstr ""
+"Construit un nouvel objet du type de base avec un script de ce type déjà "
+"attaché.\n"
+"[b]Note :[/b] Tout argument passé à cette fonction sera ignoré et ne sera "
+"pas transmis à la fonction native du constructeur. Cela va changer avec dans "
+"une future extension de l'API."
 
 #: doc/classes/Navigation.xml
 msgid "Mesh-based navigation and pathfinding node."
-msgstr ""
+msgstr "Noeuds de navigation à base de maillages et de cheminement."
 
 #: doc/classes/Navigation.xml
 msgid ""
@@ -46149,6 +46370,14 @@ msgid ""
 "class also assists with aligning navigation agents with the meshes they are "
 "navigating on."
 msgstr ""
+"[i]Obsolète.[/i] Le nœud [Navigation] et la méthode [method get_simple_path] "
+"sont rendues obsolètes et seront retiré dans une prochaine version. Utilisez "
+"plutôt [method NavigationServer.map_get_path].\n"
+"Fournit la navigation et le cheminement dans une collection de "
+"[NavigationMesh]. Par défaut, ceux-ci seront automatiquement récupérés "
+"auprès des [NavigationMeshInstance] enfants. En plus du cheminement de base, "
+"cette classe aide également à aligner les agents de navigation sur les "
+"maillages sur lesquels ils naviguent."
 
 #: doc/classes/Navigation.xml doc/classes/NavigationMesh.xml
 #: doc/classes/NavigationServer.xml
@@ -46160,6 +46389,8 @@ msgid ""
 "Returns the navigation point closest to the point given. Points are in local "
 "coordinate space."
 msgstr ""
+"Retourne le point de navigation le plus proche du point donné. Les points "
+"sont dans les coordonnées locales."
 
 #: doc/classes/Navigation.xml
 msgid ""
@@ -46167,6 +46398,9 @@ msgid ""
 "given. Useful for rotating a navigation agent according to the navigation "
 "mesh it moves on."
 msgstr ""
+"Retourne la normale de la surface au point de navigation le plus proche du "
+"point donné. Utile pour la rotation d'un agent de navigation selon "
+"l'inclinaison du maillage de navigation sur lequel il se déplace."
 
 #: doc/classes/Navigation.xml
 msgid ""
@@ -46184,10 +46418,16 @@ msgid ""
 "between segment and navigation meshes. If multiple intersection points are "
 "found, the one closest to the segment start point is returned."
 msgstr ""
+"Retourne le point de navigation le plus proche du segment de ligne donné. "
+"Quand [code]use_collision[/code] est activé, ne considère que les points "
+"d'intersection entre le segment et les maillages de navigation. Si plusieurs "
+"points d'intersection sont trouvés, celui le plus proche du point de départ "
+"du segment est retourné."
 
 #: doc/classes/Navigation.xml
 msgid "Returns the [RID] of the navigation map on the [NavigationServer]."
 msgstr ""
+"Retourne le [RID] de la carte de navigation dans le [NavigationServer]."
 
 #: doc/classes/Navigation.xml
 msgid ""
@@ -46200,8 +46440,8 @@ msgid ""
 "etc.) are considered in the path calculation, otherwise they are ignored."
 msgstr ""
 "[i]Obsolète.[/i] Le nœud [Navigation] la méthode [method get_simple_path] "
-"sont obsolètes se seront retiré dans une prochaine version. Utilisez plutôt ["
-"method NavigationServer.map_get_path].\n"
+"sont obsolètes se seront retiré dans une prochaine version. Utilisez plutôt "
+"[method NavigationServer.map_get_path].\n"
 "Retourne le chemin entre deux points donnés. Les points sont des coordonées "
 "locales. Si [code]optimize[/code] est [code]true[/code] (par défaut), les "
 "propriétés de l'agent associées à chaque [NavigationMesh] (rayon, hauteur, "
@@ -46219,6 +46459,8 @@ msgstr ""
 msgid ""
 "This value is used to detect the near edges to connect compatible regions."
 msgstr ""
+"Cette valeur est utilisée pour détecter les bords proches pour relier les "
+"régions compatibles."
 
 #: doc/classes/Navigation.xml
 msgid ""
@@ -46244,7 +46486,7 @@ msgstr ""
 
 #: doc/classes/Navigation2D.xml
 msgid "2D navigation and pathfinding node."
-msgstr ""
+msgstr "Nœuds de navigation et de cheminement en 2D."
 
 #: doc/classes/Navigation2D.xml
 msgid ""
@@ -46255,6 +46497,13 @@ msgid ""
 "as a collection of [NavigationPolygon] resources. By default, these are "
 "automatically collected from child [NavigationPolygonInstance] nodes."
 msgstr ""
+"[i]Obsolète.[/i] Le nœud [Navigation2D] et la méthode [method "
+"get_simple_path] sont rendues obsolètes et seront retiré dans une prochaine "
+"version. Utilisez plutôt [method NavigationServer.map_get_path].\n"
+"Navigation2D fournit la navigation et le cheminement dans une zone en 2D, "
+"spécifiée comme une collection de ressources [NavigationPolygon]. Par "
+"défaut, elles sont automatiquement récupérées à partir de nœuds "
+"[NavigationPolygonInstance] enfants."
 
 #: doc/classes/Navigation2D.xml doc/classes/Navigation2DServer.xml
 #: doc/classes/NavigationPolygon.xml
@@ -46267,6 +46516,9 @@ msgid ""
 "point closest to the point given. This is usually a "
 "[NavigationPolygonInstance]."
 msgstr ""
+"Retourne le propriétaire du [NavigationPolygon] qui contient le point de "
+"navigation le plus proche du point donné. C'est généralement une "
+"[NavigationPolygonInstance]."
 
 #: doc/classes/Navigation2D.xml
 msgid ""
@@ -46277,10 +46529,17 @@ msgid ""
 "space. If [code]optimize[/code] is [code]true[/code] (the default), the path "
 "is smoothed by merging path segments where possible."
 msgstr ""
+"[i]Obsolète.[/i] Le nœud [Navigation2D] et la méthode [method "
+"get_simple_path] sont rendues obsolètes et seront retiré dans une prochaine "
+"version. Utilisez plutôt [method NavigationServer.map_get_path].\n"
+"Retourne le chemin entre deux points donnés. Les points sont dans les "
+"coordonnées locales. Si [code]optimize[/code] est [code]true[/code] (par "
+"défaut), le chemin est lissé en fusionnant les segments du chemin quand "
+"c'est possible."
 
 #: doc/classes/Navigation2D.xml
 msgid "The XY plane cell size to use for fields."
-msgstr ""
+msgstr "La taille des cellules sur le plan XY pour les champs."
 
 #: doc/classes/Navigation2D.xml
 msgid ""
@@ -46290,10 +46549,9 @@ msgstr ""
 
 #: doc/classes/Navigation2DServer.xml
 msgid "Server interface for low-level 2D navigation access."
-msgstr ""
+msgstr "L'Interface serveur pour un accès bas niveau de la navigation 2D."
 
 #: doc/classes/Navigation2DServer.xml
-#, fuzzy
 msgid ""
 "Navigation2DServer is the server responsible for all 2D navigation. It "
 "handles several objects, namely maps, regions and agents.\n"
@@ -46322,26 +46580,36 @@ msgid ""
 "phase. This means that you can request any change to the map, using any "
 "thread, without worrying."
 msgstr ""
-"Le NavigationServer2D est le serveur responsable pour toutes les navigation "
-"en 2D. Il gère différents objets, nommés carte, régions et agents.\n"
-"Les cartes (\"maps\") sont faites de régions, qui sont faites de maillages "
-"de navigation. Ensemble, ces cartes définissent les aires navigables dans le "
-"monde 2D. Pour que deux régions soient connectées entre elles, elles doivent "
-"avoir une bordure en commun. Une bordure (\"edge\") est considérée connectée "
-"à une autre si elles ont deux sommets rapprochés de moins de la distance ["
-"member Navigation.edge_connection_margin].\n"
-"Pour utiliser le système d'évitement, vous devez utiliser des agents. Vous "
-"pouvez définir la vitesse cible d'un agent, puis le serveur émettra une "
+"Le NavigationServer2D est le serveur responsable de la navigation 2D. Il "
+"gère différents objets appelés cartes, régions et agents.\n"
+"Les cartes (\"maps\") sont constituées de régions qui sont faites d'un "
+"maillage de polygones de navigation. Ensemble, elles définissent les zones "
+"navigables du monde 2D.\n"
+"[b]Note :[/b] La plupart des changements effectués sur un NavigationServer "
+"ne prennent pas effet immédiatement mais après la frame de physique "
+"suivante. Cela inclut tous les changements faits aux cartes, régions ou "
+"agents par des nœuds liés à la navigation dans l'arborescence de la scène ou "
+"par des scripts.\n"
+"Pour que deux régions soient connectées entre elles, celles-ci doivent avoir "
+"une bordure en commun. Une bordure (\"edge\") est considérée connectée à une "
+"autre si ses deux sommets ont une distance inférieure à [member Navigation."
+"edge_connection_margin] des sommets respectifs de l'autre bordure.\n"
+"Vous pouvez assigner des couches de navigation aux régions avec [method "
+"Navigation2DServer.region_set_navigation_layers], qui pourra ensuite être "
+"utilisé en faisant une requête de chemin avec [method Navigation2DServer."
+"map_get_path]. Cela permet d'autoriser ou d'interdire certaines zones aux "
+"objets 2D.\n"
+"Pour utiliser le système d'évitement, vous pouvez utiliser des agents. Vous "
+"pouvez définir la vitesse cible d'un agent, le serveur émettra ensuite une "
 "méthode de rappel avec la vitesse modifiée.\n"
 "[b]Note :[/b] Le système d'évitement des collisions ignorent les régions. "
-"Utiliser la vitesse modifiée telle quelle peut déplacer un agent hors de la "
-"surface de navigable. C'est une limite du système d'évitement des "
-"collisions, et certaines situations plus complexes peuvent nécessiter "
-"l'utilisation du moteur physique.\n"
-"Le serveur garde en mémoire tous les appels et les exécutent durant la phase "
-"de synchronisation. Cela veut dire que vous pouvez demander n'importe quel "
-"changement sur l'ensemble des cartes, via n'importe quel fil d'exécution, "
-"sans soucis."
+"Utiliser la vitesse modifiée telle quelle peut faire sortir un agent d'une "
+"zone navigable. C'est une limite du système d'évitement des collisions et "
+"certaines situations plus complexes peuvent nécessiter l'utilisation du "
+"moteur physique.\n"
+"Le serveur garde en mémoire tous les appels et les exécute durant la phase "
+"de synchronisation. Ainsi, vous pouvez demander n'importe quel changement "
+"sur la carte, depuis n'importe quel fil d'exécution sans problème."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Creates the agent."
@@ -46358,6 +46626,7 @@ msgstr ""
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Returns [code]true[/code] if the map got changed the previous frame."
 msgstr ""
+"Retourne [code]true[/code] si la carte a changé lors de la trame précédente."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid ""
@@ -46389,7 +46658,7 @@ msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the maximum speed of the agent. Must be positive."
-msgstr ""
+msgstr "Définit la vitesse maximale de l'agent. Ça doit être positif."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid ""
@@ -46404,7 +46673,7 @@ msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the position of the agent in world space."
-msgstr ""
+msgstr "Définit la position de l'agent dans l'espace global."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the radius of the agent."
@@ -46429,7 +46698,7 @@ msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the current velocity of the agent."
-msgstr ""
+msgstr "Définit la vitesse actuelle de l'agent."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Destroys the given RID."
@@ -46483,8 +46752,8 @@ msgstr ""
 "Cette fonction peut être utilisée pour calculer immédiatement tous les "
 "maillages de navigation et les connexions entre les régions de la carte de "
 "navigation. Cela permet d'interroger un chemin de navigation pour une carte "
-"modifiée immédiatement et dans la même trame (plusieurs fois si nécessaire)."
-"\n"
+"modifiée immédiatement et dans la même trame (plusieurs fois si "
+"nécessaire).\n"
 "En raison de restrictions techniques, la file de commandes actuelle de "
 "NavigationServer sera exécutée aussitôt. Cela signifie que toutes les "
 "commandes de mise à jour en attente pour cette trame de physique seront "
@@ -46518,6 +46787,8 @@ msgstr ""
 #: doc/classes/Navigation2DServer.xml
 msgid "Returns the map cell height. [b]Note:[/b] Currently not implemented."
 msgstr ""
+"Retourne la hauteur de la cellule. [b]Note :[/b] N'est pas implémenté pour "
+"l'instant."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Returns the map cell size."
@@ -46567,7 +46838,7 @@ msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Returns [code]true[/code] if the map is active."
-msgstr ""
+msgstr "Retourne [code]true[/code] si la carte est active."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the map active."
@@ -46578,10 +46849,14 @@ msgid ""
 "Set the map cell height used to weld the navigation mesh polygons. [b]Note:[/"
 "b] Currently not implemented."
 msgstr ""
+"Définit la hauteur de la cellule de carte utilisée pour souder les polygones "
+"de maillage de navigation. [b]Note :[/b] N'est pas implémenté pour l'instant."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Set the map cell size used to weld the navigation mesh polygons."
 msgstr ""
+"Définit la taille de la cellule de carte utilisée pour souder les polygones "
+"de maillage de navigation."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid ""
@@ -46609,8 +46884,9 @@ msgid ""
 "an index between 0 and the return value of [method "
 "region_get_connections_count]."
 msgstr ""
-"Retourne le point de départ d'une porte de connexion. [code]connection[/code]"
-" est un indice entre 0 et la valeur de [method region_get_connections_count]."
+"Retourne le point de départ d'une porte de connexion. [code]connection[/"
+"code] est un indice entre 0 et la valeur de [method "
+"region_get_connections_count]."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid ""
@@ -46622,15 +46898,15 @@ msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Returns the [code]enter_cost[/code] of this [code]region[/code]."
-msgstr ""
+msgstr "Retourne le [code]enter_cost[/code] de cette [code]region[/code]."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid ""
 "Returns the navigation map [RID] the requested [code]region[/code] is "
 "currently assigned to."
 msgstr ""
-"Retourne le [RID] de la carte de navigation à laquelle la [code]region[/code]"
-" spécifiée est actuellement assignée."
+"Retourne le [RID] de la carte de navigation à laquelle la [code]region[/"
+"code] spécifiée est actuellement assignée."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Returns the region's navigation layers."
@@ -46638,7 +46914,7 @@ msgstr "Retourne les calques de navigation de la région."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Returns the [code]travel_cost[/code] of this [code]region[/code]."
-msgstr ""
+msgstr "Retourne le [code]travel_cost[/code] de cette [code]region[/code]."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid ""
@@ -46673,7 +46949,7 @@ msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the [code]enter_cost[/code] for this [code]region[/code]."
-msgstr ""
+msgstr "Définit le [code]enter_cost[/code] pour cette [code]region[/code]."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the map for the region."
@@ -46698,7 +46974,7 @@ msgstr "Retourne la transformation globale de cette région."
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the [code]travel_cost[/code] for this [code]region[/code]."
-msgstr ""
+msgstr "Définit le [code]travel_cost[/code] pour cette [code]region[/code]."
 
 #: doc/classes/NavigationAgent.xml
 msgid "3D agent used in navigation for collision avoidance."
@@ -46834,12 +47110,16 @@ msgid ""
 "Returns the user-defined target location (set with [method "
 "set_target_location])."
 msgstr ""
+"Retourne l'emplacement de la cible défini par l'utilisateur (défini avec "
+"[method set_target_location])."
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Returns [code]true[/code] if the navigation path's final location has been "
 "reached."
 msgstr ""
+"Retourne [code]true[/code] si l'emplacement final du parcours de navigation "
+"a été atteint."
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
@@ -46856,6 +47136,11 @@ msgid ""
 "possible to reach the target location. It should always be possible to reach "
 "the final location though. See [method get_final_location]."
 msgstr ""
+"Retourne [code]true[/code] si l'emplacement cible est atteint. L'emplacement "
+"cible est défini en utilisant [method set_target_location]. Il peut parfois "
+"ne pas être possible d'atteindre l'emplacement cible. Par contre, il devrait "
+"toujours être possible d'atteindre l'emplacement final. Voir [method "
+"get_final_location]."
 
 #: doc/classes/NavigationAgent.xml
 msgid ""
@@ -46937,7 +47222,7 @@ msgstr ""
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid "The maximum number of neighbors for the agent to consider."
-msgstr ""
+msgstr "Le nombre maximum de voisins à considérer par l'agent."
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid "The maximum speed that an agent can move."
@@ -46956,7 +47241,7 @@ msgstr ""
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid "The distance to search for other agents."
-msgstr ""
+msgstr "La distance pour chercher d'autres agents."
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
@@ -47036,7 +47321,7 @@ msgstr ""
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid "Notifies when the final location is reached."
-msgstr ""
+msgstr "Notifie quand l'emplacement final est atteint."
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
@@ -47055,9 +47340,10 @@ msgstr ""
 "set_target_location], est atteinte."
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
+#, fuzzy
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 "Notifie quand la vitesse d'évitement de collision est calculée après un "
 "appel à [method set_velocity]."
@@ -47167,6 +47453,8 @@ msgstr ""
 #: doc/classes/NavigationMesh.xml
 msgid "A mesh to approximate the walkable areas and obstacles."
 msgstr ""
+"Un maillage pour l'approximation des zones où l'on peut marcher et des "
+"obstacles."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47174,12 +47462,17 @@ msgid ""
 "environment are traversable to aid agents in pathfinding through complicated "
 "spaces."
 msgstr ""
+"Un maillage de navigation est une collection de polygones qui définissent "
+"les zones d'un environnement qui peuvent être traversés pour aider les "
+"agents dans leur cheminement dans les espaces compliqués."
 
 #: doc/classes/NavigationMesh.xml doc/classes/NavigationPolygon.xml
 msgid ""
 "Adds a polygon using the indices of the vertices you get when calling "
 "[method get_vertices]."
 msgstr ""
+"Ajoute un polygone en utilisant les indices des sommets que obtenus avec "
+"[method get_vertices]."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47192,12 +47485,16 @@ msgid ""
 "Initializes the navigation mesh by setting the vertices and indices "
 "according to a [Mesh]."
 msgstr ""
+"Initialise le maillage de navigation en définissant les sommets et les "
+"indices dans un [Mesh]."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
 "Returns whether the specified [code]bit[/code] of the [member "
 "geometry_collision_mask] is set."
 msgstr ""
+"Retourne si le [code]bit[/code] spécifié de [member geometry_collision_mask] "
+"est défini."
 
 #: doc/classes/NavigationMesh.xml doc/classes/NavigationPolygon.xml
 msgid ""
@@ -47209,7 +47506,7 @@ msgstr ""
 
 #: doc/classes/NavigationMesh.xml
 msgid "Returns the number of polygons in the navigation mesh."
-msgstr ""
+msgstr "Retourne le nombre de polygones dans le maillage de navigation."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47236,6 +47533,8 @@ msgid ""
 "Sets the vertices that can be then indexed to create polygons with the "
 "[method add_polygon] method."
 msgstr ""
+"Définit les sommets qui peuvent ensuite être indexés pour créer des "
+"polygones avec la méthode [method add_polygon]."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47244,6 +47543,10 @@ msgid ""
 "[b]Note:[/b] While baking, this value will be rounded up to the nearest "
 "multiple of [member cell_height]."
 msgstr ""
+"La hauteur minimale entre le sol et le plafond qui permettra toujours que la "
+"surface au sol soit considérée comme pouvant être traversée.\n"
+"[b]Note :[/b] Pendant le pré-calcul, cette valeur sera arrondie au multiple "
+"le plus proche de [member cell_height]."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47251,10 +47554,15 @@ msgid ""
 "[b]Note:[/b] While baking, this value will be rounded down to the nearest "
 "multiple of [member cell_height]."
 msgstr ""
+"La hauteur minimale de haie qui est considérée comme toujours pouvant être "
+"traversée.\n"
+"[b]Note :[/b] Pendant le pré-calcul, cette valeur sera arrondie au multiple "
+"le plus proche de [member cell_height]."
 
 #: doc/classes/NavigationMesh.xml
 msgid "The maximum slope that is considered walkable, in degrees."
 msgstr ""
+"La pente maximale qui est considérée comme pouvant être traversée, en degrés."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47266,24 +47574,30 @@ msgstr ""
 
 #: doc/classes/NavigationMesh.xml
 msgid "The Y axis cell size to use for fields."
-msgstr ""
+msgstr "La taille de la cellule suivant l'axe Y pour les champs."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
 "The sampling distance to use when generating the detail mesh, in cell unit."
 msgstr ""
+"La distance d'échantillonnage à utiliser pour générer le maillage de détail, "
+"dans l'unité des cellules."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
 "The maximum distance the detail mesh surface should deviate from "
 "heightfield, in cell unit."
 msgstr ""
+"La distance maximale de la surface de maillage de détail devrait s'écarter "
+"du champ de hauteur, dans l'unité des cellules."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
 "The maximum distance a simplfied contour's border edges should deviate the "
 "original raw contour."
 msgstr ""
+"La distance maximale qu'un contour simplifié peut dévier du contour brut "
+"d'origine."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47291,6 +47605,10 @@ msgid ""
 "[b]Note:[/b] While baking, this value will be rounded up to the nearest "
 "multiple of [member cell_size]."
 msgstr ""
+"La longueur maximale autorisée pour les bords de contour le long de la "
+"bordure du maillage.\n"
+"[b]Note :[/b] Pendant le pré-calcul, cette valeur sera arrondie au multiple "
+"le plus proche de [member cell_height]."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47301,6 +47619,7 @@ msgstr ""
 #: doc/classes/NavigationMesh.xml
 msgid "The position offset applied to the [member filter_baking_aabb] [AABB]."
 msgstr ""
+"Le décalage de position appliqué au [AABB] de [member filter_baking_aabb]."
 
 #: doc/classes/NavigationMesh.xml
 msgid "If [code]true[/code], marks spans that are ledges as non-walkable."
@@ -47341,6 +47660,8 @@ msgid ""
 "The source of the geometry used when baking. See [enum SourceGeometryMode] "
 "for possible values."
 msgstr ""
+"La source de la géométrie utilisée lors du pré-calcul. Voir [enum "
+"SourceGeometryMode] pour les valeurs possibles."
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -47589,6 +47910,8 @@ msgid ""
 "Removes all polygons and vertices from the provided [code]nav_mesh[/code] "
 "resource."
 msgstr ""
+"Enlève tous les polygones et les sommets de la ressource [code]nav_mesh[/"
+"code] fournie."
 
 #: doc/classes/NavigationMeshInstance.xml
 msgid "An instance of a [NavigationMesh]."
@@ -47664,10 +47987,10 @@ msgid ""
 "identify the [NavigationMeshInstance] closest to a point on the merged "
 "navigation map."
 msgstr ""
-"Retourne le [RID] de cette région sur [NavigationServer]. Combiné avec ["
-"method NavigationServer.map_get_closest_point_owner], peut être utilisé pour "
-"identifier le [NavigationMeshInstance] le plus proche d'un point d'une carte "
-"de navigation fusionnée."
+"Retourne le [RID] de cette région sur [NavigationServer]. Combiné avec "
+"[method NavigationServer.map_get_closest_point_owner], peut être utilisé "
+"pour identifier le [NavigationMeshInstance] le plus proche d'un point d'une "
+"carte de navigation fusionnée."
 
 #: doc/classes/NavigationMeshInstance.xml
 msgid "Determines if the [NavigationMeshInstance] is enabled or disabled."
@@ -47707,6 +48030,8 @@ msgstr ""
 #: doc/classes/NavigationMeshInstance.xml
 msgid "Notifies when the navigation mesh bake operation is completed."
 msgstr ""
+"Notifie quand l'opération de pré-calcul de maillage de navigation est "
+"terminée."
 
 #: doc/classes/NavigationMeshInstance.xml
 msgid "Notifies when the [NavigationMesh] has changed."
@@ -47844,8 +48169,8 @@ msgid ""
 "$NavigationPolygonInstance.navpoly = polygon\n"
 "[/codeblock]"
 msgstr ""
-"Il y a deux façons de créer des polygones. Soit en utilisant la méthode ["
-"method add_outline], soit en utilisant la méthode [method add_polygon].\n"
+"Il y a deux façons de créer des polygones. Soit en utilisant la méthode "
+"[method add_outline], soit en utilisant la méthode [method add_polygon].\n"
 "Avec [method add_outline] :\n"
 "[codeblock]\n"
 "var polygon = NavigationPolygon.new()\n"
@@ -47955,20 +48280,20 @@ msgid ""
 "Removes an outline created in the editor or by script. You have to call "
 "[method make_polygons_from_outlines] for the polygons to update."
 msgstr ""
-"Enlève un aperçu créé dans l'éditeur ou par un script. Vous devez appeler ["
-"method make_polygons_from_outlines] pour mettre à jour les polygones."
+"Enlève un aperçu créé dans l'éditeur ou par un script. Vous devez appeler "
+"[method make_polygons_from_outlines] pour mettre à jour les polygones."
 
 #: doc/classes/NavigationPolygon.xml
 msgid ""
 "Changes an outline created in the editor or by script. You have to call "
 "[method make_polygons_from_outlines] for the polygons to update."
 msgstr ""
-"Change un aperçu créé dans l'éditeur ou par un script. Vous devez appeler ["
-"method make_polygons_from_outlines] pour mettre à jour les polygones."
+"Change un aperçu créé dans l'éditeur ou par un script. Vous devez appeler "
+"[method make_polygons_from_outlines] pour mettre à jour les polygones."
 
 #: doc/classes/NavigationPolygonInstance.xml
 msgid "A region of the 2D navigation map."
-msgstr ""
+msgstr "Une région de la carte de navigation 2D."
 
 #: doc/classes/NavigationPolygonInstance.xml
 msgid ""
@@ -47997,8 +48322,8 @@ msgstr ""
 "la carte de navigation du nœud de navigation.\n"
 "Deux régions peuvent être reliées l'une à l'autre si elles partagent un bord "
 "similaire. Vous pouvez définir la distance minimale entre deux sommets "
-"nécessaires pour connecter deux bords en utilisant [method Navigation2DServer"
-".map_set_edge_connection_margin]\n"
+"nécessaires pour connecter deux bords en utilisant [method "
+"Navigation2DServer.map_set_edge_connection_margin]\n"
 "[b]Note :[/b] Embiquer deux régions ne suffit pas pour relier ces deux "
 "régions. Elles doivent partager un bord similaire.\n"
 "Le coût de cheminement de cette région vers une autre peut être contrôlé "
@@ -48015,10 +48340,10 @@ msgid ""
 "identify the [NavigationPolygonInstance] closest to a point on the merged "
 "navigation map."
 msgstr ""
-"Retourne le [RID] de cette région sur le [Navigation2DServer]. Combiné avec ["
-"method Navigation2DServer.map_get_closest_point_propriétaire] peut permettre "
-"d'identifier le [NavigationPolygonInstance] le plus proche d'un point sur la "
-"carte de navigation fusionnée."
+"Retourne le [RID] de cette région sur le [Navigation2DServer]. Combiné avec "
+"[method Navigation2DServer.map_get_closest_point_propriétaire] peut "
+"permettre d'identifier le [NavigationPolygonInstance] le plus proche d'un "
+"point sur la carte de navigation fusionnée."
 
 #: doc/classes/NavigationPolygonInstance.xml
 msgid "Determines if the [NavigationPolygonInstance] is enabled or disabled."
@@ -48038,10 +48363,9 @@ msgstr "La ressource [NavigationPolygon] à utiliser."
 
 #: doc/classes/NavigationServer.xml
 msgid "Server interface for low-level 3D navigation access."
-msgstr ""
+msgstr "Interface serveur pour un accès de navigation 3D de bas niveau."
 
 #: doc/classes/NavigationServer.xml
-#, fuzzy
 msgid ""
 "NavigationServer is the server responsible for all 3D navigation. It handles "
 "several objects, namely maps, regions and agents.\n"
@@ -48089,12 +48413,14 @@ msgstr ""
 
 #: doc/classes/NavigationServer.xml
 msgid "Returns the map cell height."
-msgstr ""
+msgstr "Retourne la hauteur de la cellule de la carte."
 
 #: doc/classes/NavigationServer.xml
 msgid ""
 "Returns the normal for the point returned by [method map_get_closest_point]."
 msgstr ""
+"Retourne la normale pour le point retourné par [method "
+"map_get_closest_point]."
 
 #: doc/classes/NavigationServer.xml
 msgid ""
@@ -48118,6 +48444,8 @@ msgstr "Retourne la direction haut de la carte."
 #: doc/classes/NavigationServer.xml
 msgid "Set the map cell height used to weld the navigation mesh polygons."
 msgstr ""
+"Définit la hauteur de la cellule de carte utilisée pour souder les polygones "
+"de maillage de navigation."
 
 #: doc/classes/NavigationServer.xml
 msgid "Sets the map up direction."
@@ -48157,6 +48485,8 @@ msgid ""
 "A [NetworkedMultiplayerPeer] implementation that can be controlled from a "
 "script."
 msgstr ""
+"Une implémentation de [NetworkedMultiplayerPeer] qui peut être contrôlée à "
+"partir d'un script."
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
@@ -48165,6 +48495,11 @@ msgid ""
 "Its purpose is to allow adding a new backend for the high-Level multiplayer "
 "API without needing to use GDNative."
 msgstr ""
+"Une implémentation de [NetworkedMultiplayerPeer] qui peut être utilisée "
+"comme un [member MultiplayerAPI.network_peer] et contrôlée à partir d'un "
+"script.\n"
+"Son but est de permettre d'ajouter un nouveau backend haut niveau pour l'API "
+"multijoueur sans avoir besoin d'utiliser GDNative."
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
@@ -48173,24 +48508,38 @@ msgid ""
 "(originating from the [signal packet_generated] signal on the sending peer), "
 "passing it to this method will deliver it locally."
 msgstr ""
+"Envoie un paquet au [MultiplayerAPI] local.\n"
+"Lorsque votre script reçoit un paquet d'autres pairs sur le réseau (à partir "
+"du signal [signal packet_generated] sur le pair que l'envoie), il le "
+"transmet à cette méthode en local."
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
-"Retourne l'état actuel de la connexion. Voir [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid "Set the max packet size that this peer can handle."
-msgstr ""
+msgstr "Définit la taille maximale du paquet que ce pair peut traiter."
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
@@ -48199,6 +48548,10 @@ msgid ""
 "the network (which should call [method deliver_packet] with the data when "
 "it's received)."
 msgstr ""
+"Émis lorsque le [MultiplayerAPI] local génère un paquet.\n"
+"Votre script devrait prendre ce paquet et l'envoyer au pair spécifié sur le "
+"réseau (qui devrait appeler [method deliver_packet] avec les données "
+"lorsqu'il reçoit)."
 
 #: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
 msgid ""
@@ -48282,9 +48635,9 @@ msgstr ""
 "client a été créé, [constant ERR_ALREADY_IN_USE] si ce "
 "NetworkedMultiplayerENet a déjà une connexion ouverte (dans quel cas vous "
 "devez appeler [method close_connection] d'abord) ou [constant "
-"ERR_CANT_CREATE] si le client ne peut pas être créé. Si "
-"[code]client_port[/code] est spécifié, le client écoutera également le port "
-"donné ; ceci est utile pour certaines techniques NAT transversale."
+"ERR_CANT_CREATE] si le client ne peut pas être créé. Si [code]client_port[/"
+"code] est spécifié, le client écoutera également le port donné ; ceci est "
+"utile pour certaines techniques NAT transversale."
 
 #: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
 msgid ""
@@ -48340,8 +48693,8 @@ msgid ""
 "Returns the channel of the next packet that will be retrieved via [method "
 "PacketPeer.get_packet]."
 msgstr ""
-"Retourne le canal du prochain paquet qui sera récupéré via [method PacketPeer"
-".get_packet]."
+"Retourne le canal du prochain paquet qui sera récupéré via [method "
+"PacketPeer.get_packet]."
 
 #: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
 #: modules/websocket/doc_classes/WebSocketServer.xml
@@ -49449,11 +49802,11 @@ msgid ""
 "[method get_node] instead. To avoid using [method find_parent] too often, "
 "consider caching the node reference into a variable."
 msgstr ""
-"Trouve le premier parent de ce nœud dont le nom correspond à "
-"[code]mask[/code] suivant le même fonctionnement que pour [method String."
-"match] (c'est-à-dire sensible à la casse, que [code]\"*\"[/code] correspond "
-"à un zéro au un seul caractère, et que [code]\"?\"[/code] correspond à "
-"n'importe quel unique caractère sauf [code]\".\"[/code]).\n"
+"Trouve le premier parent de ce nœud dont le nom correspond à [code]mask[/"
+"code] suivant le même fonctionnement que pour [method String.match] (c'est-à-"
+"dire sensible à la casse, que [code]\"*\"[/code] correspond à un zéro au un "
+"seul caractère, et que [code]\"?\"[/code] correspond à n'importe quel unique "
+"caractère sauf [code]\".\"[/code]).\n"
 "[b]Note :[/b] La correspondance ne se fait pas sur le chemin complet mais "
 "juste les noms des nœuds.\n"
 "[b]Note :[/b] Comme cette méthode liste tous les parents d'un nœud, c'est le "
@@ -49669,9 +50022,9 @@ msgid ""
 "processing unless the frames per second is changed via [member Engine."
 "iterations_per_second]."
 msgstr ""
-"Retourne le temps écoulé (en secondes) depuis la dernière trame physique ("
-"voir [method _physics_process]). C'est toujours une valeur constante dans le "
-"traitement de la physique à moins que les trames par seconde ne soient "
+"Retourne le temps écoulé (en secondes) depuis la dernière trame physique "
+"(voir [method _physics_process]). C'est toujours une valeur constante dans "
+"le traitement de la physique à moins que les trames par seconde ne soient "
 "changés via [member Engine.iterations_per_second]."
 
 #: doc/classes/Node.xml
@@ -49746,6 +50099,8 @@ msgid ""
 "Returns [code]true[/code] if the given node occurs later in the scene "
 "hierarchy than the current node."
 msgstr ""
+"Retourne [code]true[/code] si le nœud donné apparait plus tard dans la "
+"hiérarchie de la scène que le nœud actuel."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -49790,8 +50145,8 @@ msgid ""
 "See [member SceneTree.physics_interpolation] and [member ProjectSettings."
 "physics/common/physics_interpolation]."
 msgstr ""
-"Retourne [code]true[/code] si l'interpolation physique est activée (voir ["
-"member physics_interpolation_mode]) [b]et[/b] activée dans [SceneTree].\n"
+"Retourne [code]true[/code] si l'interpolation physique est activée (voir "
+"[member physics_interpolation_mode]) [b]et[/b] activée dans [SceneTree].\n"
 "Il s'agit d'une version pratique de [method is_physics_interpolated] qui "
 "vérifie également si l'interpolation physique est activée globalement.\n"
 "Voir [member SceneTree.physics_interpolation] et [member ProjectSettings."
@@ -50127,13 +50482,13 @@ msgid ""
 "By default, methods are not exposed to networking (and RPCs). See also "
 "[method rset] and [method rset_config] for properties."
 msgstr ""
-"Change le mode RPC pour la [code]method[/code] donné pour le "
-"[code]mode[/code] spécifié. Voir [enum MultiplayerAPI.RPCMode]. Une "
-"alternative est d'annoter les méthodes et les propriétés avec les mots-clés "
-"correspondants ([code]remote[/code], [code]master[/code], [code]puppet[/code]"
-", [code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/code])"
-". Par défaut, les méthodes ne sont pas exposées au réseaut (et aux RPC). "
-"Voir aussi [method rset] et [method rset_config] pour les propriétés."
+"Change le mode RPC pour la [code]method[/code] donné pour le [code]mode[/"
+"code] spécifié. Voir [enum MultiplayerAPI.RPCMode]. Une alternative est "
+"d'annoter les méthodes et les propriétés avec les mots-clés correspondants "
+"([code]remote[/code], [code]master[/code], [code]puppet[/code], "
+"[code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/code]). "
+"Par défaut, les méthodes ne sont pas exposées au réseaut (et aux RPC). Voir "
+"aussi [method rset] et [method rset_config] pour les propriétés."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50187,22 +50542,26 @@ msgstr ""
 "Change le mode RPC pour la [code]property[/code] donnée au [code]mode[/code] "
 "spécifié. Voir [enum MultiplayerAPI.RPCMode]. Une alternative est "
 "l'annotation des méthodes et des propriétés avec les mots-clés "
-"correspondants ([code]remote[/code], [code]master[/code], [code]puppet[/code]"
-", [code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/code])"
-". Par défaut, les propriétés ne sont pas exposées au réseau (et au RPC). "
-"Voir aussi [method rpc] et [method rpc_config] pour les méthodes."
+"correspondants ([code]remote[/code], [code]master[/code], [code]puppet[/"
+"code], [code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/"
+"code]). Par défaut, les propriétés ne sont pas exposées au réseau (et au "
+"RPC). Voir aussi [method rpc] et [method rpc_config] pour les méthodes."
 
 #: doc/classes/Node.xml
 msgid ""
 "Remotely changes the property's value on a specific peer identified by "
 "[code]peer_id[/code] (see [method NetworkedMultiplayerPeer.set_target_peer])."
 msgstr ""
+"Modifie à distance de la valeur de la propriété indiquée par [code]peer_id[/"
+"code] (voir [method NetworkedMultiplayerPeer.set_target_peer])."
 
 #: doc/classes/Node.xml
 msgid ""
 "Remotely changes the property's value on other peers (and locally) using an "
 "unreliable protocol."
 msgstr ""
+"Modifie à distance la valeur de propriété enregistrée sur d'autres pairs (et "
+"localement) en utilisant un protocole non fiable."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50210,10 +50569,13 @@ msgid ""
 "[code]peer_id[/code] using an unreliable protocol (see [method "
 "NetworkedMultiplayerPeer.set_target_peer])."
 msgstr ""
+"Modifie à distance de la valeur de la propriété suivante sur un pair "
+"spécifique identifié par [code]peer_id[/code] en utilisant un protocole non "
+"fiable (voir [method NetworkedMultiplayerPeer.set_target_peer])."
 
 #: doc/classes/Node.xml
 msgid "Sets the folded state of the node in the Scene dock."
-msgstr ""
+msgstr "Définit l'état réduit du nœud dans le dock de Scène."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50224,6 +50586,12 @@ msgid ""
 "defaults to peer ID 1 (the server). If [code]recursive[/code], the given "
 "peer is recursively set as the master for all children of this node."
 msgstr ""
+"Définit le nœud maître du réseau au pair avec l'identifiant de pair donné. "
+"Le maître du réseau est le pair qui a autorité sur le nœud sur le réseau. "
+"Utile avec les mots-clés [code]master[/code] et [code]puppet[/code]. "
+"Inhérité du nœud parent par défaut, qui a par défaut l'identifiant 1 (le "
+"serveur). Si [code]recursive[/code], le pair donné est récursivement défini "
+"comme le maître pour tous les enfants de ce nœud."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50235,6 +50603,13 @@ msgid ""
 "if [method _physics_process] is overridden. Any calls to this before [method "
 "_ready] will be ignored."
 msgstr ""
+"Active ou désactive le traitement physique (c'est-à-dire les trames fixes). "
+"Lorsqu'un nœud est en cours de traitement, il recevra la notification "
+"[constant NOTIFICATION_PHYSICS_PROCESS] à un intervalle fixe (généralement "
+"60 FPS, voir [member Engine.iterations_per_second] pour le changer), et le "
+"callback [method physique_process] sera appelé s'il existe. Est activé "
+"automatiquement si [method physique_process] est surchargé. Tout appel à "
+"cela avant [method _ready] sera ignoré."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50293,11 +50668,16 @@ msgid ""
 "_unhandled_key_input] is overridden. Any calls to this before [method "
 "_ready] will be ignored."
 msgstr ""
+"Permet un traitement des touches d'entrée non traitées. Activé "
+"automatiquement si [method unhandled_key_input] est surchargé. Tout appel à "
+"cela avant [method _ready] sera ignoré."
 
 #: doc/classes/Node.xml
 msgid ""
 "Sets whether this is an instance load placeholder. See [InstancePlaceholder]."
 msgstr ""
+"Définit s'il s'agit d'un chargeur fictif d'instance. Voir "
+"[InstancePlaceholder]."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50305,12 +50685,17 @@ msgid ""
 "Use [method _get_configuration_warning] to setup the warning message to "
 "display."
 msgstr ""
+"Met à jour l'avertissement affiché pour ce nœud dans le dock de Scène.\n"
+"Utilisez [method get_configuration_warning] pour configurer le message "
+"d'avertissement à afficher."
 
 #: doc/classes/Node.xml
 msgid ""
 "The override to the default [MultiplayerAPI]. Set to [code]null[/code] to "
 "use the default [SceneTree] one."
 msgstr ""
+"La surcharge de la valeur par défaut du [MultiplayerAPI]. Définissez-le à "
+"[code]null[/code] pour utiliser la valeur par défaut de [SceneTree]."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50319,12 +50704,19 @@ msgid ""
 "[code]res://levels/1.tscn[/code]). Otherwise, [member filename] is set to an "
 "empty string."
 msgstr ""
+"Si une scène est instanciée à partir d'un fichier, son nœud le plus haut "
+"contient le chemin de fichier absolu à partir duquel elle a été chargée "
+"depuis [member filename] (par exemple [code]res://levels/1.tscn[/code]). "
+"Sinon, [member filename] sera une chaîne vide."
 
 #: doc/classes/Node.xml
 msgid ""
 "The [MultiplayerAPI] instance associated with this node. Either the [member "
 "custom_multiplayer], or the default SceneTree one (if inside tree)."
 msgstr ""
+"L'instance [MultiplayerAPI] associée à ce nœud. Soit le [member "
+"custom_multiplayer], ou la SceneTree par défaut (si l'intérieur de "
+"l'arborescence)."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50376,6 +50768,11 @@ msgid ""
 "process priority value is [i]lower[/i] will have their processing callbacks "
 "executed first."
 msgstr ""
+"La priorité du nœud dans l'ordre d'exécution des appels de traitement "
+"activés (c'est-à-dire [constant NOTIFICATION_PROCESS], [constant "
+"NOTIFICATION_PHYSICS_PROCESS] et leurs homologues internes). Les nœuds dont "
+"la valeur de priorité d'exécution est [i]plus basse[/i] auront leurs appels "
+"de traitement exécutés en premier."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50393,6 +50790,10 @@ msgid ""
 "This signal is emitted [i]after[/i] the child node's own [constant "
 "NOTIFICATION_ENTER_TREE] and [signal tree_entered]."
 msgstr ""
+"Émis lorsqu'un nœud enfant entre dans l'arborescence, soit parce qu'il est "
+"entré seul ou parce que ce nœud est entré avec lui.\n"
+"Ce signal est émis [i]après[/i] [constant NOTIFICATION_ENTER_TREE] et "
+"[signal tree_entered] de cet enfant."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50403,6 +50804,12 @@ msgid ""
 "tree and valid. This signal is emitted [i]after[/i] the child node's own "
 "[signal tree_exiting] and [constant NOTIFICATION_EXIT_TREE]."
 msgstr ""
+"Émis lorsqu'un nœud d'enfant var quitter l'arborescence, soit parce qu'il "
+"est enlevé ou libéré directement, soit parce que ce nœud sort de "
+"l'arborescence.\n"
+"Lorsque ce signal est reçu, le [code]node[/code] enfant est toujours dans "
+"l'arborescence et valide. Ce signal est émis [i]après[/i] [signal "
+"tree_exiting] et [constant NOTIFICATION_EXIT_TREE] de cet enfant."
 
 #: doc/classes/Node.xml
 msgid "Emitted when the node is ready."
@@ -50418,6 +50825,9 @@ msgid ""
 "This signal is emitted [i]after[/i] the related [constant "
 "NOTIFICATION_ENTER_TREE] notification."
 msgstr ""
+"Émis quand le nœud entre dans l'arborescence.\n"
+"Ce signal est émis [i]après[/i] la notification correspondante [constant "
+"NOTIFICATION_ENTER_TREE]."
 
 #: doc/classes/Node.xml
 msgid "Emitted after the node exits the tree and is no longer active."
@@ -50430,12 +50840,19 @@ msgid ""
 "This signal is emitted [i]before[/i] the related [constant "
 "NOTIFICATION_EXIT_TREE] notification."
 msgstr ""
+"Émis quand le nœud est encore actif mais sur le point de quitter "
+"l'arborescence. C'est le bon endroit pour la de-initialisation (ou d'appel "
+"au \"destructeur\").\n"
+"Ce signal est émis [i]avant[/i] la notification correspondante [constant "
+"NOTIFICATION_EXIT_TREE]."
 
 #: doc/classes/Node.xml
 msgid ""
 "Notification received when the node enters a [SceneTree].\n"
 "This notification is emitted [i]before[/i] the related [signal tree_entered]."
 msgstr ""
+"La notification reçue lorsque le nœud entre dans un [SceneTree].\n"
+"Cette notification est émise [i]avant[/i] la [signal tree_entered]."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50467,24 +50884,34 @@ msgid ""
 "Notification received every frame when the physics process flag is set (see "
 "[method set_physics_process])."
 msgstr ""
+"La notification reçue chaque trame lorsque le drapeau du processus de "
+"physique est défini (voir [method set_physics_process])."
 
 #: doc/classes/Node.xml
 msgid ""
 "Notification received every frame when the process flag is set (see [method "
 "set_process])."
 msgstr ""
+"La notification a reçu chaque trame lorsque le drapeau de processus est "
+"défini (voir [method set_process])."
 
 #: doc/classes/Node.xml
 msgid ""
 "Notification received when a node is set as a child of another node.\n"
 "[b]Note:[/b] This doesn't mean that a node entered the [SceneTree]."
 msgstr ""
+"La notification reçue lorsqu'un nœud est défini comme un enfant d'un autre "
+"nœud.\n"
+"[b]Note :[/b] Cela ne signifie pas que le nœud est nécessairement entré dans "
+"le [SceneTree]."
 
 #: doc/classes/Node.xml
 msgid ""
 "Notification received when a node is unparented (parent removed it from the "
 "list of children)."
 msgstr ""
+"La notification reçue lorsqu'un nœud n'a plus de parent (le parent l'a "
+"retiré de sa liste d'enfants)."
 
 #: doc/classes/Node.xml
 msgid "Notification received when the node is instanced."
@@ -50504,6 +50931,9 @@ msgid ""
 "Notification received when a drag operation ends.\n"
 "Use [method Viewport.gui_is_drag_successful] to check if the drag succeeded."
 msgstr ""
+"La notification reçue à la fin d'une opération de déposé-glissé.\n"
+"Utilisez [method Viewport.gui_is_drag_successful] pour vérifier si "
+"l'opération a réussi."
 
 #: doc/classes/Node.xml
 msgid "Notification received when the node's [NodePath] changed."
@@ -50514,12 +50944,16 @@ msgid ""
 "Notification received every frame when the internal process flag is set (see "
 "[method set_process_internal])."
 msgstr ""
+"La notification a reçu chaque trame lorsque le drapeau interne du processus "
+"est défini (voir [method set_process_internal])."
 
 #: doc/classes/Node.xml
 msgid ""
 "Notification received every frame when the internal physics process flag is "
 "set (see [method set_physics_process_internal])."
 msgstr ""
+"La notification a reçu chaque trame lorsque le drapeau du processus physique "
+"interne est défini (voir [method set_physics_process_internal])."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50527,12 +50961,18 @@ msgid ""
 "NOTIFICATION_READY] is received. Unlike the latter, it's sent every time the "
 "node enters tree, instead of only once."
 msgstr ""
+"La notification reçue lorsque le nœud est prêt, juste avant que [constant "
+"NOTIFICATION_READY] soit reçue. Contrairement à cette dernière, cette "
+"notification est envoyée chaque fois que le nœud entre dans l'arborescence, "
+"et pas juste une seule fois."
 
 #: doc/classes/Node.xml
 msgid ""
 "Notification received when [method reset_physics_interpolation] is called on "
 "the node or parent nodes."
 msgstr ""
+"La notification reçue lorsque [method reset_physics_interpolation] est "
+"appelée sur le nœud ou les nœuds parents."
 
 #: doc/classes/Node.xml
 msgid ""
@@ -50546,25 +50986,32 @@ msgstr "Arrête la mise à jour quand le [SceneTree] est en pause."
 
 #: doc/classes/Node.xml
 msgid "Continue to process regardless of the [SceneTree] pause state."
-msgstr ""
+msgstr "Continuer le processus peu importe l'état de pause de la [SceneTree]."
 
 #: doc/classes/Node.xml
 msgid ""
 "Inherits physics interpolation mode from the node's parent. For the root "
 "node, it is equivalent to [constant PHYSICS_INTERPOLATION_MODE_ON]. Default."
 msgstr ""
+"Inhérit le mode d'interpolation physique de la part du nœud parent. Pour le "
+"nœud racine, c'est équivalent à [constant PHYSICS_INTERPOLATION_MODE_ON]. "
+"C'est la valeur par défaut."
 
 #: doc/classes/Node.xml
 msgid ""
 "Turn off physics interpolation in this node and children set to [constant "
 "PHYSICS_INTERPOLATION_MODE_INHERIT]."
 msgstr ""
+"Désactive l'interpolation physique de ce nœud et ses enfants qui sont "
+"définis à [constant PHYSICS_INTERPOLATION_MODE_INHERIT]."
 
 #: doc/classes/Node.xml
 msgid ""
 "Turn on physics interpolation in this node and children set to [constant "
 "PHYSICS_INTERPOLATION_MODE_INHERIT]."
 msgstr ""
+"Active l'interpolation physique de ce nœud et ses enfants qui sont définis à "
+"[constant PHYSICS_INTERPOLATION_MODE_INHERIT]."
 
 #: doc/classes/Node.xml
 msgid "Duplicate the node's signals."
@@ -50584,12 +51031,17 @@ msgid ""
 "An instance stays linked to the original so when the original changes, the "
 "instance changes too."
 msgstr ""
+"Duplique via instanciation.\n"
+"Une instance reste liée à l'original de sorte que lorsque l'original change, "
+"l'instance change aussi."
 
 #: doc/classes/Node2D.xml
 msgid ""
 "A 2D game object, inherited by all 2D-related nodes. Has a position, "
 "rotation, scale, and Z index."
 msgstr ""
+"Un objet de jeu 2D, hérité de tous les nœuds 2D. A une position, une "
+"rotation, une mise à l'échelle et un indice de profondeur Z."
 
 #: doc/classes/Node2D.xml
 msgid ""
@@ -50598,6 +51050,11 @@ msgid ""
 "Node2D as a parent node to move, scale and rotate children in a 2D project. "
 "Also gives control of the node's render order."
 msgstr ""
+"Un objet 2D de jeu, avec une transformation (position, rotation et mise à "
+"l'échelle). Tous les nœuds 2D, y compris les objets de physique et les "
+"sprites, héritent de Node2D. Utilisez Node2D comme nœud parent pour "
+"déplacer, mettre à l'échelle et pivoter des enfants dans un projet 2D. donne "
+"également le contrôle sur l'ordre de rendu des nœuds."
 
 #: doc/classes/Node2D.xml doc/classes/Vector2.xml
 msgid "All 2D Demos"
@@ -50614,6 +51071,9 @@ msgid ""
 "[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
 "node2d_get_angle_to.png]Illustration of the returned angle.[/url]"
 msgstr ""
+"Retourne l'angle entre le nœud et le [code]point[/code] en radians.\n"
+"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
+"nœud2d_get_angle_to.png]Illustration de l'angle retourné.[/url]"
 
 #: doc/classes/Node2D.xml
 msgid "Returns the [Transform2D] relative to this node's parent."
@@ -50630,6 +51090,8 @@ msgid ""
 "Rotates the node so it points towards the [code]point[/code], which is "
 "expected to use global coordinates."
 msgstr ""
+"Pivote le nœud pour qu'il pointe vers [code]point[/code], en supposant ça se "
+"passe avec des coordonnées globales."
 
 #: doc/classes/Node2D.xml
 msgid ""
@@ -50637,6 +51099,9 @@ msgid ""
 "_process]'s [code]delta[/code]. If [code]scaled[/code] is [code]false[/"
 "code], normalizes the movement."
 msgstr ""
+"Applique un déplacement locale selon l'axe X du nœud suivant [code]delta[/"
+"code] depuis [method Node._process]. Si [code]scaled[/code] est [code]false[/"
+"code], le déplacement sera normalisé."
 
 #: doc/classes/Node2D.xml
 msgid ""
@@ -50644,12 +51109,16 @@ msgid ""
 "_process]'s [code]delta[/code]. If [code]scaled[/code] is [code]false[/"
 "code], normalizes the movement."
 msgstr ""
+"Applique un déplacement locale selon l'axe Y du nœud suivant [code]delta[/"
+"code] depuis [method Node._process]. Si [code]scaled[/code] est [code]false[/"
+"code], le déplacement sera normalisé."
 
 #: doc/classes/Node2D.xml
 msgid ""
 "Applies a rotation to the node, in radians, starting from its current "
 "rotation."
 msgstr ""
+"Applique une rotation au nœud, en radians, à partir de son actuelle rotation."
 
 #: doc/classes/Node2D.xml
 msgid ""
@@ -50698,7 +51167,7 @@ msgstr "[Transform2D] global."
 
 #: doc/classes/Node2D.xml
 msgid "Position, relative to the node's parent."
-msgstr ""
+msgstr "La position, relative au nœud parent."
 
 #: doc/classes/Node2D.xml
 msgid "Rotation in radians, relative to the node's parent."
@@ -50728,6 +51197,9 @@ msgid ""
 "index. If this node's Z index is 2 and its parent's effective Z index is 3, "
 "then this node's effective Z index will be 2 + 3 = 5."
 msgstr ""
+"Si [code]true[/code], l'indice n'est pas défini comme étant relatif à "
+"l'indice Z. Si l'indice Z du nœud est de 2 et que l'indice Z actuel du "
+"parent est de 3, l'indice Z de ce nœud sera au final 2 + 3 = 5."
 
 #: doc/classes/Node2D.xml
 msgid ""
@@ -50736,6 +51208,10 @@ msgid ""
 "VisualServer.CANVAS_ITEM_Z_MIN] and [constant VisualServer."
 "CANVAS_ITEM_Z_MAX] (inclusive)."
 msgstr ""
+"Indice Z. Control l'ordre dans lequel les nœuds sont affichés. Un nœud avec "
+"un indice Z supérieur s'affichera devant les autres. Doit être définit entre "
+"[constant VisualServer.CANVAS_ITEM_Z_MIN] et [constant VisualServer."
+"CANVAS_ITEM_Z_MAX] (inclus)."
 
 #: doc/classes/NodePath.xml
 msgid "Pre-parsed scene tree path."
@@ -50885,6 +51361,19 @@ msgid ""
 "print(property_path) # :position:x\n"
 "[/codeblock]"
 msgstr ""
+"Retourne un chemin de nœud avec un caractère deux points ([code]:[/code]) "
+"ajouté, le transformant en un chemin de propriété pur sans nom de nœud (par "
+"défaut de résolution du nœud actuel).\n"
+"[codeblock]\n"
+"# Ce sera interprété comme un chemin de nœud vers la propriété \"x\" dans le "
+"nœud \"position\".\n"
+"d'appel au nœud_path = NodePath).\n"
+"var node_path = NodePath(\"position:x\")\n"
+"# Cela sera interprété comme un chemin de nœud vers le composant \"x\" de la "
+"propriété \"position\" du nœud actuel.\n"
+"var property_path = node_path.get_as_property_path()\n"
+"print(property_path) # :position:x\n"
+"[/codeblock]"
 
 #: doc/classes/NodePath.xml
 msgid ""
@@ -50929,6 +51418,9 @@ msgid ""
 "get_subname_count]) are not included.\n"
 "For example, [code]\"Path2D/PathFollow2D/Sprite\"[/code] has 3 names."
 msgstr ""
+"Retourne le nombre de noms de nœuds qui composent le chemin. Les sous-noms "
+"(voir [method get_subname_count]) ne sont pas inclus.\n"
+"Par exemple, [code]\"Path2D/PathFollow2D/Sprite\"[/code] a 3 noms."
 
 #: doc/classes/NodePath.xml
 msgid ""
@@ -50956,6 +51448,11 @@ msgid ""
 "For example, [code]\"Path2D/PathFollow2D/Sprite:texture:load_path\"[/code] "
 "has 2 subnames."
 msgstr ""
+"Retourne le nombre de noms de ressources ou de propriétés (\"sous-noms\") "
+"dans le chemin. Chaque sous-nom est répertorié après deux points ([code]:[/"
+"code]) dans le chemin du nœud.\n"
+"Par exemple, [code]\"Path2D/PathFollow2D/Sprite:texture:load_path\"[/code] a "
+"2 sous-noms."
 
 #: doc/classes/NodePath.xml
 msgid ""
@@ -50965,6 +51462,11 @@ msgid ""
 "root\"[/code]) or autoloads (e.g. [code]\"/global\"[/code] if a \"global\" "
 "autoload was registered)."
 msgstr ""
+"Retourne [code]true[/code] si le chemin du nœud est absolu (et non relatif), "
+"ce qui signifie qu'il commence par une barre oblique ([code]/[/code]). Les "
+"chemins de nœuds absolus peuvent être utilisés pour accéder au nœud racine "
+"([code]\"/root\"[/code]) ou pour les chargements automatiques (par exemple "
+"[code]\"/global\"[/code] si \"global\" est chargé automatiquement)."
 
 #: doc/classes/NodePath.xml
 msgid "Returns [code]true[/code] if the node path is empty."
@@ -51010,12 +51512,17 @@ msgid ""
 "If [code]true[/code], the resulting texture contains a normal map created "
 "from the original noise interpreted as a bump map."
 msgstr ""
+"Si [code]true[/code], la texture résultante contient une carte normale créée "
+"à partir du bruit original interprété comme une carte de bosse."
 
 #: modules/opensimplex/doc_classes/NoiseTexture.xml
 msgid ""
 "Strength of the bump maps used in this texture. A higher value will make the "
 "bump maps appear larger while a lower value will make them appear softer."
 msgstr ""
+"L'intensité des cartes de bosse utilisées dans cette texture. Une valeur "
+"plus élevée rendra les cartes de bosse plus grandes alors qu'une valeur plus "
+"basse les rendra plus douces."
 
 #: modules/opensimplex/doc_classes/NoiseTexture.xml
 msgid "Height of the generated texture."
@@ -51031,6 +51538,9 @@ msgid ""
 "of the generated noise. This value is ignored if [member seamless] is "
 "enabled."
 msgstr ""
+"Un décalage utilisé pour préciser la coordonnées de l'espace de bruit du "
+"coin supérieur gauche du bruit généré. Cette valeur est ignorée si [member "
+"seamless] est activé."
 
 #: modules/opensimplex/doc_classes/NoiseTexture.xml
 msgid ""
@@ -51139,6 +51649,10 @@ msgid ""
 "Returns the given property. Returns [code]null[/code] if the [code]property[/"
 "code] does not exist."
 msgstr ""
+"Une méthode virtuelle qui peut être surchargée pour personnaliser la valeur "
+"de retour de [method get].\n"
+"Retourne la propriété donnée. Retourne [code]null[/code] si [code]property[/"
+"code] n'existe pas."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51161,6 +51675,12 @@ msgid ""
 "class. If any other means (such as [method PackedScene.instance]) is used, "
 "then initialization will fail."
 msgstr ""
+"Appelé lorsque l'objet est initialisé en mémoire. Peut prendre des "
+"paramètres, qui sont passés dans lors de la construction.\n"
+"[b]Note :[/b] Si [method _init] est défini avec les paramètres requis, alors "
+"la construction explicite (via le code) est le seul moyen valable de créer "
+"un objet de cette classe. Si d'autres moyens (comme [method PackedScene."
+"instance]) sont utilisés, l'initialisation échouera."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51170,6 +51690,11 @@ msgid ""
 "NOTIFICATION_PREDELETE], but subclasses such as [Node] define a lot more "
 "notifications which are also received by this method."
 msgstr ""
+"Appelé chaque fois que l'objet reçoit une notification, qui est identifiée "
+"par [code]what[/code] qui est une constante. Le [Object] de base a deux "
+"constantes [constant NOTIFICATION_POSTINITIALIZE] et [constant "
+"NOTIFICATION_PREDELETE], mais les sous-classes comme [Node] définissent "
+"beaucoup plus de notifications qui sont également reçues par cette méthode."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51178,6 +51703,10 @@ msgid ""
 "Sets a property. Returns [code]true[/code] if the [code]property[/code] "
 "exists."
 msgstr ""
+"La méthode virtuelle qui peut être surchargée pour personnaliser la valeur "
+"de retour de [method set].\n"
+"Définit une propriété. Retourne [code]true[/code] si la [code]property[/"
+"code] existe."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51187,6 +51716,12 @@ msgid ""
 "Returns a [String] representing the object. If not overridden, defaults to "
 "[code]\"[ClassName:RID]\"[/code]."
 msgstr ""
+"Une méthode virtuelle qui peut être remplacée pour personnaliser la valeur "
+"de retour de [method to_string], et donc la représentation de l'objet s'il "
+"est converti en chaîne de caractère, par exemple avec [code]print(obj)[/"
+"code].\n"
+"Retourne une [String] représentant l'objet. Si ce n'est pas le cas, le "
+"format [code]\"[ClassName:RID]\"[/code] se retourné par défaut."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51269,6 +51804,8 @@ msgid ""
 "Returns [code]true[/code] if the object can translate strings. See [method "
 "set_message_translation] and [method tr]."
 msgstr ""
+"Retourne [code]true[/code] si l'objet peut traduire des chaînes de "
+"caractères. Voir [method set_message_translation] et [method tr]."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51345,6 +51882,11 @@ msgid ""
 "print an error. Use [method is_connected] to ensure that the connection "
 "exists."
 msgstr ""
+"Déconnecte le [code]signal[/code] d'une [code]method[/code] pour la cible "
+"[code]target[/code] donnée.\n"
+"Si vous essayez de déconnecter une connexion qui n'existe pas, la méthode "
+"affichera une erreur. Utiliser [method is_connected] pour s'assurer que la "
+"connexion existe."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51357,6 +51899,15 @@ msgid ""
 "emit_signal(\"game_over\")\n"
 "[/codeblock]"
 msgstr ""
+"Émet le [code]signal[/code] donné. Le signal doit exister, de sorte qu'il "
+"doit être un signal intégré de cette classe ou une de ses classes parentes, "
+"ou un signal défini par l'utilisateur. Cette méthode prend en charge un "
+"nombre variable d'arguments, de sorte que les paramètres sont passés comme "
+"une liste séparée par des virgules. Exemple :\n"
+"[codeblock]\n"
+"emit_signal(\"hit\", weapon_type, damage)\n"
+"emit_signal(\"game_over\")\n"
+"[/codeblock]"
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51387,6 +51938,11 @@ msgid ""
 "declarations into account. If the object has a [code]class_name[/code] "
 "defined, the base class name will be returned instead."
 msgstr ""
+"Retourne la classe de l'objet en tant que [String]. Voir aussi [method "
+"is_class].\n"
+"[b]Note :[/b] [method get_class] ignore les déclarations [code]class_name[/"
+"code]. Si l'objet a un [code]class_name[/code] défini, le nom de classe de "
+"base sera retourné à la place."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51398,6 +51954,13 @@ msgid ""
 "- [code]method_name[/code] is the name of the method to which the signal is "
 "connected."
 msgstr ""
+"Retourne un [Array] de dictionnaires avec des informations sur les signaux "
+"qui sont connectés à l'objet.\n"
+"Chaque [Dictionary] contient trois entrées en String :\n"
+"- [code]source[/code] est une référence à l'émetteur de signal.\n"
+"- [code]signal_name[/code] est le nom du signal connecté.\n"
+"- [code]method_name[/code] est le nom de la méthode à laquelle le signal est "
+"connecté."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51417,6 +51980,10 @@ msgid ""
 "This ID can be saved in [EncodedObjectAsID], and can be used to retrieve the "
 "object instance with [method @GDScript.instance_from_id]."
 msgstr ""
+"Retourne l'identifiant de l'instance unique de l'objet.\n"
+"Cet identifiant peut être enregistré dans [EncodedObjectAsID] et peut être "
+"utilisé pour récupérer l'objet de l'instance avec [method @GDScript."
+"instance_from_id]."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51424,6 +51991,10 @@ msgid ""
 "Throws error if the entry does not exist, unless [code]default[/code] is not "
 "[code]null[/code] (in which case the default value will be returned)."
 msgstr ""
+"Retourne l'entrée de métadonnées de l'objet [code]name[/code] spécifié.\n"
+"Affiche une erreur si l'entrée n'existe pas, sauf si [code]default[/code] "
+"n'est pas [code]null[/code] (dans quel cas la valeur par défaut sera "
+"retournée)."
 
 #: doc/classes/Object.xml
 msgid "Returns the object's metadata as a [PoolStringArray]."
@@ -51442,6 +52013,13 @@ msgid ""
 "[code]hint_string: String[/code], and [code]usage: int[/code] (see [enum "
 "PropertyUsageFlags])."
 msgstr ""
+"Retourne la liste de propriétés de l'objet dans un [Array] de "
+"dictionnaires.\n"
+"Chaque propriété [Dictionary] contient au moins [code]name: String[/code] et "
+"[code]type: int[/code] (voir [enum Variant.Type]). En option, il peut "
+"également inclure [code]hint: int[/code] (voir [enum PropertyHint]), "
+"[code]hint_string: String[/code], et [code]usage: int[/code] (voir [enum "
+"PropertyUsageFlags])."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51485,6 +52063,9 @@ msgid ""
 "exists. Only signals added using [method add_user_signal] are taken into "
 "account."
 msgstr ""
+"Retourne [code]true[/code] si le [code]signal[/code] défini par "
+"l'utilisateur existe. Seuls les signaux ajoutés à [method add_user_signal] "
+"sont pris en compte."
 
 #: doc/classes/Object.xml
 msgid "Returns [code]true[/code] if signal emission blocking is enabled."
@@ -51498,6 +52079,11 @@ msgid ""
 "declarations into account. If the object has a [code]class_name[/code] "
 "defined, [method is_class] will return [code]false[/code] for that name."
 msgstr ""
+"Retourne [code]true[/code] si l'objet hérite de la [code]class[/code] "
+"donnée. Voir aussi [method get_class].\n"
+"[b]Note :[/b] [method is_class] ne prend pas en compte les déclarations "
+"[code]class_name[/code]. Si l'objet a un [code]class_name[/code] défini, "
+"[method is_class] retournera [code]false[/code] pour ce nom."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51579,12 +52165,23 @@ msgid ""
 "print(position) # (42, -10)\n"
 "[/codeblock]"
 msgstr ""
+"Assigne une nouvelle valeur à la propriété identifiée par le [NodePath]. Le "
+"chemin nœud devrait être relatif à l'objet courant et peut utiliser le "
+"caractère des deux points ([code]:[/code]) pour accéder aux propriétés "
+"imbriquées. Par exemple :\n"
+"[codeblock]\n"
+"set_indexed(\"position\", Vector2(42, 0))\n"
+"set_indexed(\"position:y\", -10)\n"
+"print(position) # (42, -10)\n"
+"[/codeblock]"
 
 #: doc/classes/Object.xml
 msgid ""
 "Defines whether the object can translate strings (with calls to [method "
 "tr]). Enabled by default."
 msgstr ""
+"Définit si l'objet peut traduire des chaînes (avec des appels à [method "
+"tr]). Activé par défaut."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51604,6 +52201,11 @@ msgid ""
 "freed and its variables and state will be lost. The new script's [method "
 "_init] method will be called."
 msgstr ""
+"Attribue un script à l'objet. Chaque objet peut avoir un seul script qui lui "
+"est assigné, qui sont utilisés pour étendre ses fonctionnalités.\n"
+"Si l'objet avait déjà un script, l'instance de script précédente sera "
+"libérée, ses variables et son état seront perdus. La méthode [method _init] "
+"du nouveau script sera appelée."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51612,6 +52214,10 @@ msgid ""
 "Override the method [method _to_string] to customize the [String] "
 "representation."
 msgstr ""
+"Retourne une [String] représentant l'objet. Si ce n'est pas le cas, au "
+"format par défaut [code]\"[ClassName:RID]\"[/code].\n"
+"Surcharger la méthode [method to_string] pour personnaliser la "
+"représentation en [String] affichée."
 
 #: doc/classes/Object.xml
 msgid ""
@@ -51621,6 +52227,11 @@ msgid ""
 "otherwise it returns the [code]message[/code] unchanged. See [method "
 "set_message_translation]."
 msgstr ""
+"Traduit un message en utilisant le catalogue de translations définit dans "
+"les réglages du projet.\n"
+"Ne fonctionne que si la traduction de message est activée (par défaut), "
+"sinon elle retourne le [code]message[/code] inchangé. Voir [method "
+"set_message_translation]."
 
 #: doc/classes/Object.xml
 msgid "Emitted whenever the object's script is changed."
@@ -51662,6 +52273,9 @@ msgid ""
 "connected several times to the same target, and will only be fully "
 "disconnected once no references are left."
 msgstr ""
+"Connectez un signal avec un compteur de référence. Cela signifie qu'un "
+"signal donné peut être connecté plusieurs fois à la même cible, et ne sera "
+"complètement déconnecté qu'une fois déconnecté de toutes les références."
 
 #: doc/classes/Occluder.xml
 msgid "Allows [OccluderShape]s to be used for occlusion culling."
@@ -51700,6 +52314,8 @@ msgid ""
 "Editor facility that helps you draw a 2D polygon used as resource for "
 "[LightOccluder2D]."
 msgstr ""
+"Aide de l'édition pour dessiner un polygone 2D utilisé comme ressource pour "
+"un [LightOccluder2D]."
 
 #: doc/classes/OccluderPolygon2D.xml
 msgid ""
@@ -51707,6 +52323,10 @@ msgid ""
 "occludes the light coming from any direction. An opened OccluderPolygon2D "
 "occludes the light only at its outline's direction."
 msgstr ""
+"Si [code]true[/code], ferme (boucle) le polygone. Un OccluderPolygon2D fermé "
+"bloque la lumière provenant de n'importe quelle direction. Un "
+"OccluderPolygon2D ouvert ne bloque que la lumière qui vient en direction de "
+"son alignement."
 
 #: doc/classes/OccluderPolygon2D.xml
 msgid "The culling mode to use."
@@ -51718,6 +52338,9 @@ msgid ""
 "[b]Note:[/b] The returned value is a copy of the underlying array, rather "
 "than a reference."
 msgstr ""
+"Un tableau de [Vector2] avec l'indice pour les positions des sommets.\n"
+"[b]Note :[/b] La valeur retournée est une copie du tableau sous-jacent, et "
+"non pas une référence."
 
 #: doc/classes/OccluderPolygon2D.xml
 msgid "Culling is disabled. See [member cull_mode]."
@@ -51743,6 +52366,8 @@ msgstr ""
 #: doc/classes/OccluderShape.xml
 msgid "[Occluder]s can use any primitive shape derived from [OccluderShape]."
 msgstr ""
+"Les [Occluder] peuvent utiliser toute forme primitive dérivée de "
+"[OccluderShape]."
 
 #: doc/classes/OccluderShapePolygon.xml
 msgid "Polygon occlusion primitive for use with the [Occluder] node."
@@ -51765,7 +52390,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/OccluderShapePolygon.xml
-#, fuzzy
 msgid "Sets an individual hole point position."
 msgstr "Définit la position d'un trou simple."
 
@@ -51775,17 +52399,19 @@ msgstr "Définit la position d'un seul point d'un polygone."
 
 #: doc/classes/OccluderShapePolygon.xml
 msgid "Allows changing the hole geometry from code."
-msgstr ""
+msgstr "Permet de changer la géométrie du trou depuis le code."
 
 #: doc/classes/OccluderShapePolygon.xml
 msgid "Allows changing the polygon geometry from code."
-msgstr ""
+msgstr "Permet de changer la géométrie de polygone depuis le code."
 
 #: doc/classes/OccluderShapePolygon.xml
 msgid ""
 "Specifies whether the occluder should operate from both sides. If "
 "[code]false[/code], the occluder will operate one way only."
 msgstr ""
+"Précise si l'occulteur devrait fonctionner des deux côtés. Si [code]false[/"
+"code], l'occulteur ne fonctionnera que dans un sens."
 
 #: doc/classes/OccluderShapeSphere.xml
 msgid "Spherical occlusion primitive for use with the [Occluder] node."
@@ -51815,6 +52441,9 @@ msgid ""
 "each sphere is stored in the [code]normal[/code], and the radius is stored "
 "in the [code]d[/code] value of the plane."
 msgstr ""
+"Les données de la sphère peuvent être obtenues dans un de tableau de "
+"[Plane]. La position de chaque sphère est enregistrée dans [code]normal[/"
+"code], et le rayon dans la valeur [code]d[/code] du plan."
 
 #: doc/classes/OmniLight.xml
 msgid "Omnidirectional light, such as a light bulb or a candle."
@@ -51867,6 +52496,8 @@ msgid ""
 "Shadows are rendered to a dual-paraboloid texture. Faster than [constant "
 "SHADOW_CUBE], but lower-quality."
 msgstr ""
+"Les ombres sont rendues dans une texture dual-paraboloïde. Plus rapide que "
+"[constant SHADOW_CUBE], mais de qualité inférieure."
 
 #: doc/classes/OmniLight.xml
 msgid ""
@@ -51874,6 +52505,9 @@ msgid ""
 "SHADOW_DUAL_PARABOLOID], but higher-quality. Only supported on GPUs that "
 "feature support for depth cubemaps."
 msgstr ""
+"Les ombres sont rendues à un CubeMap. Plus lent que [constant "
+"SHADOW_DUAL_PARABOLOID], mais de qualité supérieure. Seulement pris en "
+"charge sur les GPU qui disposent du support pour les CubeMap de profondeur."
 
 #: doc/classes/OmniLight.xml
 msgid "Use more detail vertically when computing the shadow."
@@ -51908,6 +52542,25 @@ msgid ""
 "print(noise.get_noise_4d(0.5, 1.9, 4.7, 0.0))\n"
 "[/codeblock]"
 msgstr ""
+"Cette ressource vous permet de configurer et d'échantillonner un espace de "
+"bruit fractal. Voici un court exemple d'utilisation qui configure un "
+"OpenSimplexNoise et obtient des échantillons à différentes positions et "
+"dimensions :\n"
+"[codeblock]\n"
+"var noise = OpenSimplexNoise.new()\n"
+"\n"
+"# Configuration\n"
+"noise.seed = randi()\n"
+"noise.octaves = 4\n"
+"noise.period = 20.0\n"
+"noise.persistence = 0.8\n"
+"\n"
+"# Échantionnage\n"
+"print(\"Valeurs :\")\n"
+"print(noise.get_noise_2d(1.0, 1.0))\n"
+"print(noise.get_noise_3d(0.5, 3.0, 15.0))\n"
+"print(noise.get_noise_4d(0.5, 1.9, 4.7, 0.0))\n"
+"[/codeblock]"
 
 #: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
 msgid ""
@@ -51917,6 +52570,10 @@ msgid ""
 "value is used as the coordinates of the top-left corner of the generated "
 "noise."
 msgstr ""
+"Générer une image de bruit au format [constant Image.FORMAT_L8] à la taille "
+"[code]width[/code] sur [code]height[/code], basé sur les paramètres de bruit "
+"actuels. Si [code]noise_offset[/code] est spécifié, le décalage sera utilisé "
+"comme coordonnées du coin supérieur gauche du bruit généré."
 
 #: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
 msgid ""
@@ -51924,6 +52581,10 @@ msgid ""
 "[b]Note:[/b] This method actually returns the 2D noise value [code][-1,1][/"
 "code] with fixed y-coordinate value 0.0."
 msgstr ""
+"Retourne le code de valeur de bruit 1D dans l'intervalle [code][-1,1][/code] "
+"pour la coordonnée x donnée.\n"
+"[b]Note :[/b] Cette méthode retourne en fait la valeur de bruit 2D dans "
+"l'intervalle [code][-1,1][/code] mais avec la coordonnée y fixée à 0.0."
 
 #: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
 msgid "Returns the 2D noise value [code][-1,1][/code] at the given position."
@@ -51967,6 +52628,8 @@ msgid ""
 "Period of the base octave. A lower period results in a higher-frequency "
 "noise (more value changes across the same distance)."
 msgstr ""
+"La période de l'octave de base. Une période inférieure entraîne un bruit de "
+"fréquence plus élevée (plus de valeur change sur la même distance)."
 
 #: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
 msgid ""
@@ -51974,12 +52637,18 @@ msgid ""
 "value of 1 means all the octaves have the same contribution, a value of 0.5 "
 "means each octave contributes half as much as the previous one."
 msgstr ""
+"Le facteur de contribution des différentes octaves. Une valeur "
+"[code]persistence[/code] de 1 signifie que toutes les octaves ont la même "
+"contribution, une valeur de 0,5 signifie chaque octave contribue à la moitié "
+"de la précédente."
 
 #: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
 msgid ""
 "Seed used to generate random values, different seeds will generate different "
 "noise maps."
 msgstr ""
+"La graine utilisée pour générer des valeurs aléatoires, différentes graines "
+"généreront différentes cartes de bruit."
 
 #: doc/classes/OptionButton.xml
 msgid "Button control that provides selectable options when pressed."
@@ -51993,6 +52662,11 @@ msgid ""
 "See also [BaseButton] which contains common properties and methods "
 "associated with this node."
 msgstr ""
+"OptionButton est un type de bouton qui fournit une liste d'éléments "
+"lorsqu'il est pressé. L'élément sélectionné devient l'élément \"actuel\" et "
+"s'affiche comme le texte du bouton.\n"
+"Voir aussi [BaseButton] qui contient des propriétés et des méthodes communes "
+"associées à ce nœud."
 
 #: doc/classes/OptionButton.xml
 msgid ""
@@ -52000,6 +52674,10 @@ msgid ""
 "(optionally) [code]id[/code]. If no [code]id[/code] is passed, the item "
 "index will be used as the item's ID. New items are appended at the end."
 msgstr ""
+"Ajoute un élément, avec une icône [code]texture[/code], un texte "
+"[code]label[/code] et (en option) un [code]id[/code]. Si aucun [code]id[/"
+"code] n'est spécifié, l'index de l'élément sera utilisé comme identifiant de "
+"l'élément. Les nouveaux éléments sont placés à la fin de la liste."
 
 #: doc/classes/OptionButton.xml
 msgid ""
@@ -52007,12 +52685,19 @@ msgid ""
 "If no [code]id[/code] is passed, the item index will be used as the item's "
 "ID. New items are appended at the end."
 msgstr ""
+"Ajoute un élément, avec le texte [code]label[/code] et (en option) un "
+"[code]id[/code]. Si aucun [code]id[/code] n'est spécifié, l'index de "
+"l'élément sera utilisé comme identifiant de l'élément. Les nouveaux éléments "
+"sont placés à la fin de la liste."
 
 #: doc/classes/OptionButton.xml
 msgid ""
 "Adds a separator to the list of items. Separators help to group items. "
 "Separator also takes up an index and is appended at the end."
 msgstr ""
+"Ajoute un séparateur à la liste des articles. Les séparateurs aident à "
+"regrouper les éléments. Le séparateur prend également un index et est ajouté "
+"à la fin."
 
 #: doc/classes/OptionButton.xml
 msgid "Clears all the items in the [OptionButton]."
@@ -52065,6 +52750,8 @@ msgid ""
 "Gets the metadata of the selected item. Metadata for items can be set using "
 "[method set_item_metadata]."
 msgstr ""
+"Retourne les métadonnées de l'élément sélectionné. Les métadonnées peuvent "
+"être définies en utilisant [method set_item_metadata]."
 
 #: doc/classes/OptionButton.xml
 msgid ""
@@ -52083,6 +52770,10 @@ msgid ""
 "if the item is disabled.\n"
 "Passing [code]-1[/code] as the index deselects any currently selected item."
 msgstr ""
+"Sélectionne un élément par son index et en fait l'élément actuel. Cela "
+"fonctionnera même si l'élément est désactivé.\n"
+"Passer [code]-1[/code] en index désélectionne tout élément actuellement "
+"sélectionné."
 
 #: doc/classes/OptionButton.xml
 msgid ""
@@ -52091,6 +52782,11 @@ msgid ""
 "by the user. If the current selected item is set as disabled, it will remain "
 "selected."
 msgstr ""
+"Définit si l'élément à l'index [code]idx[/code] est désactivé.\n"
+"Les éléments désactivés sont dessinés différemment dans la liste déroulante "
+"et ne peuvent pas être sélectionnés par l'utilisateur. Si l'élément "
+"sélectionné actuel est définit comme désactivé, il restera tout de même "
+"sélectionné."
 
 #: doc/classes/OptionButton.xml
 msgid "Sets the icon of the item at index [code]idx[/code]."
@@ -52105,6 +52801,9 @@ msgid ""
 "Sets the metadata of an item. Metadata may be of any type and can be used to "
 "store extra information about an item, such as an external string ID."
 msgstr ""
+"Définit les métadonnées d'un élément. Les métadonnées peuvent être de "
+"n'importe quel type et peuvent être utilisées pour stocker des informations "
+"supplémentaires sur un élément, comme un identifiant de chaîne externe."
 
 #: doc/classes/OptionButton.xml doc/classes/PopupMenu.xml
 msgid "Sets the text of the item at index [code]idx[/code]."
@@ -52119,6 +52818,8 @@ msgid ""
 "The index of the currently selected item, or [code]-1[/code] if no item is "
 "selected."
 msgstr ""
+"L'index de l'élément actuellement sélectionné, ou [code]-1[/code] si aucun "
+"élément n'est sélectionné."
 
 #: doc/classes/OptionButton.xml
 msgid ""
@@ -52126,12 +52827,17 @@ msgid ""
 "[code]ui_down[/code] actions. The index of the item selected is passed as "
 "argument."
 msgstr ""
+"Émis lorsque l'utilisateur navigue vers un élément utilisant les actions "
+"[code]ui_up[/code] ou [code]ui_down[/code]. L'index de l'élément sélectionné "
+"est passé comme argument."
 
 #: doc/classes/OptionButton.xml
 msgid ""
 "Emitted when the current item has been changed by the user. The index of the "
 "item selected is passed as argument."
 msgstr ""
+"Émis lorsque l'élément actuel a été modifié par l'utilisateur. L'index de "
+"l'élément sélectionné est passé en argument."
 
 #: doc/classes/OptionButton.xml
 msgid "Default text [Color] of the [OptionButton]."
@@ -52147,6 +52853,9 @@ msgid ""
 "normal text color of the button. Disabled, hovered, and pressed states take "
 "precedence over this color."
 msgstr ""
+"La [Color] du texte utilisée quand le [OptionButton] a le focus. Ne remplace "
+"que la couleur normale du texte du bouton. Les états désactivés, survolés et "
+"pressés sont prioritaires sur cette couleur."
 
 #: doc/classes/OptionButton.xml
 msgid "Text [Color] used when the [OptionButton] is being hovered."
@@ -52184,6 +52893,9 @@ msgid ""
 "current [StyleBox], so using [StyleBoxEmpty] will just disable the focus "
 "visual effect."
 msgstr ""
+"Le [StyleBox] utilisé lorsque [OptionButton] a le focus. Elle est affichée "
+"sur la [StyleBox] actuelle, dont utiliser [StyleBoxEmpty] va tout simplement "
+"désactiver l'effet visuel de focus."
 
 #: doc/classes/OptionButton.xml
 msgid "[StyleBox] used when the [OptionButton] is being hovered."
@@ -52219,6 +52931,8 @@ msgid ""
 "Displays a modal dialog box using the host OS' facilities. Execution is "
 "blocked until the dialog is closed."
 msgstr ""
+"Affiche une boîte de dialogue modal en utilisant le système d'exploitation "
+"hôte. L'exécution est bloquée jusqu'à ce que le dialogue soit fermé."
 
 #: doc/classes/OS.xml
 msgid "Returns [code]true[/code] if the host OS allows drawing."
@@ -52236,13 +52950,15 @@ msgstr ""
 
 #: doc/classes/OS.xml
 msgid "Centers the window on the screen if in windowed mode."
-msgstr ""
+msgstr "Centre la fenêtre à l'écran si en mode fenêtre."
 
 #: doc/classes/OS.xml
 msgid ""
 "Shuts down system MIDI driver.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Ferme le système de pilote MIDI.\n"
+"[b]Note :[/b] Cette méthode est implémenté sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52252,6 +52968,12 @@ msgid ""
 "order of preference) [method @GDScript.assert], [method @GDScript."
 "push_error] or [method alert]. See also [method kill]."
 msgstr ""
+"Fait planter le moteur (ou l'éditeur si appelé dans un script avec "
+"[code]tool[/code]). Ceci ne devrait être [i]seulement[/i] utilisé pour "
+"tester le gestionnaire de plantage du système, et non pour toute autre "
+"raison. Pour la déclaration d'erreur générale, utilisez (dans l'ordre des "
+"préférences) : [method @GDScript.assert], [method @GDScript.push_error] ou "
+"[method alert]. Voir aussi [method kill]."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52396,7 +53118,7 @@ msgstr ""
 
 #: doc/classes/OS.xml
 msgid "Returns the scancode of the given string (e.g. \"Escape\")."
-msgstr ""
+msgstr "Retourne le scancode de la chaîne donnée (par exemple \"Escape\")."
 
 #: doc/classes/OS.xml
 msgid "Returns the total number of available audio drivers."
@@ -52404,7 +53126,7 @@ msgstr "Retourne le nombre total de périphériques audio."
 
 #: doc/classes/OS.xml
 msgid "Returns the audio driver name for the given index."
-msgstr ""
+msgstr "Retourne le nom du pilote audio à l'index donné."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52463,12 +53185,18 @@ msgid ""
 "previously been initialised with [method open_midi_inputs].\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Retourne un tableau de noms de périphériques MIDI.\n"
+"Le tableau retourné sera vide si le pilote MIDI n'a pas déjà été initialisé "
+"avec [method open_midi_inputs].\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
 "Returns the currently used video driver, using one of the values from [enum "
 "VideoDriver]."
 msgstr ""
+"Retourne le pilote vidéo actuellement utilisé, en utilisant une des valeurs "
+"de [enum VideoDriver]."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52543,6 +53271,9 @@ msgid ""
 "been granted to the Android application.\n"
 "[b]Note:[/b] This method is implemented on Android."
 msgstr ""
+"Avec cette fonction, vous pouvez obtenir la liste des autorisations "
+"dangereuses qui ont été accordées à cette application Android.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Android."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52552,6 +53283,11 @@ msgid ""
 "notify it of changes to the IME cursor position.\n"
 "[b]Note:[/b] This method is implemented on macOS."
 msgstr ""
+"Retourne la position de curseur IME (la partie actuellement éditée de la "
+"chaîne) par rapport aux caractères de la chaîne de composition.\n"
+"[constant MainLoop.NOTIFICATION_OS_IME_UPDATE] est envoyé à l'application "
+"pour l'informer des modifications apportées à la position du curseur IME.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur macOS."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52560,6 +53296,10 @@ msgid ""
 "notify it of changes to the IME composition string.\n"
 "[b]Note:[/b] This method is implemented on macOS."
 msgstr ""
+"Retourne la chaîne de composition intermédiaire IME.\n"
+"[constant MainLoop.NOTIFICATION_OS_IME_UPDATE] est envoyé à l'application "
+"pour l'informer des modifications apportées à la chaîne de composition IME.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur macOS."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52607,6 +53347,10 @@ msgid ""
 "[b]Note:[/b] Thread IDs are not deterministic and may be reused across "
 "application restarts."
 msgstr ""
+"Retourne l'identifiant du fil d'exécution principal. Voir [method "
+"get_thread_caller_id].\n"
+"[b]Note :[/b] Les identifiants des Thread ne sont pas déterministes mais "
+"peuvent parfois être réutilisés même après des redémarrages de l'application."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52614,6 +53358,9 @@ msgid ""
 "[b]Note:[/b] This method is implemented on Android and iOS. Returns "
 "[code]\"GenericDevice\"[/code] on unsupported platforms."
 msgstr ""
+"Retourne le nom du modèle de l'appareil actuel.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Android et iOS. Retourne "
+"[code]\"GénériqueDevice\"[/code] sur les plateformes non supportées."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52633,6 +53380,10 @@ msgid ""
 "[b]Note:[/b] This method is implemented on Linux and Windows (other OSs will "
 "soon be supported)."
 msgstr ""
+"Retourne les pointeurs de structure internes pour une utilisation dans les "
+"greffons GDNative.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux et Windows (d'autres "
+"OS seront bientôt pris en charge)."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52640,6 +53391,9 @@ msgid ""
 "[code]-1[/code] if power state is unknown.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Retourne la quantité de batterie restante dans l'appareil en pourcentage. "
+"Retourne [code]-1[/code] si l'état de la batterie est inconnu.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52647,6 +53401,10 @@ msgid ""
 "of battery. Returns [code]-1[/code] if power state is unknown.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Retourne une estimation du temps restant en secondes avant que l'appareil "
+"n'ait plus de batterie. Retourne [code]-1[/code] si l'état de la batterie "
+"est inconnu.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52664,6 +53422,9 @@ msgid ""
 "[b]Note:[/b] This method is implemented on Android, iOS, Linux, macOS and "
 "Windows."
 msgstr ""
+"Retourne l'identifiant du processus du projet.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Android, iOS, Linux, macOS "
+"et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52671,6 +53432,9 @@ msgid ""
 "machine. On CPUs with HyperThreading enabled, this number will be greater "
 "than the number of [i]physical[/i] CPU cores."
 msgstr ""
+"Retourne le nombre de cœurs [i]logiques[/i] du CPU disponibles sur la "
+"machine hôte. Sur les processeurs avec le mode HyperThreading activé, ce "
+"nombre sera supérieur au nombre de cœurs [i]physiques[/i] du CPU."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52680,6 +53444,11 @@ msgid ""
 "iOS. On Android, HTML5 and UWP, [method get_processor_name] returns an empty "
 "string."
 msgstr ""
+"Retourne le nom du modèle CPU sur la machine hôte (par exemple \"Intel(R) "
+"Core(TM) i7-6700K CPU @ 4.00GHz\").\n"
+"[b]Note :[/b] Cette méthode n'est implémentée que sur Windows, MacOS, Linux "
+"et iOS. Sur Android, HTML5 et UWP, [method get_processor_name] renvoie une "
+"chaîne vide."
 
 #: doc/classes/OS.xml
 msgid "Returns the window size including decorations like window borders."
@@ -52694,6 +53463,10 @@ msgid ""
 "See also [member InputEventKey.scancode] and [method InputEventKey."
 "get_scancode_with_modifiers]."
 msgstr ""
+"Retourne le scancode spécifié sous forme de chaîne (par exemple valeurs de "
+"retour : [code]\"Escape\"[/code], [code]\"Shift+Escape\"[/code]).\n"
+"Voir aussi [member InputEventKey.scancode] et [method InputEventKey."
+"get_scancode_with_modifiers]."
 
 #: doc/classes/OS.xml
 msgid "Returns the number of displays attached to the host machine."
@@ -52745,6 +53518,11 @@ msgid ""
 "other cases.\n"
 "[b]Note:[/b] This method is implemented on macOS."
 msgstr ""
+"Retourner le plus grand facteur d'échelle de tous les écrans.\n"
+"[b]Note :[/b] Sur macOS la valeur retournée est [code]2.0[/code] s'il y a au "
+"moins un écran hiDPI (Retina) dans le système, et [code]1.0[/code] dans tous "
+"les autres cas.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur macOS."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52772,6 +53550,20 @@ msgid ""
 "    refresh_rate = 60.0\n"
 "[/codeblock]"
 msgstr ""
+"Retourne le taux de rafraîchissement actuel de l'écran spécifié. Si "
+"[code]screen[/code] est [code]-1[/code] (la valeur par défaut), l'écran "
+"actuel sera utilisé.\n"
+"[b]Note :[/b] Retourne [code]-1.0[/code] si Godot ne trouve pas le taux de "
+"rafraîchissement pour l'écran spécifié. Sur HTML5, [method "
+"get_screen_refresh_rate] retournera toujours [code]-1.0[/code] car il n'y a "
+"aucun moyen de récupérer le taux de rafraîchissement sur cette plate-forme.\n"
+"Pour utiliser un taux de rafraîchissement par défaut si la méthode échoue, "
+"essayez :\n"
+"[codeblock]\n"
+"var refresh_rate = OS.get_screen_refresh_rate()\n"
+"if refresh_rate < 0:\n"
+"    refresh_rate = 60.0\n"
+"[/codeblock]"
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52782,6 +53574,12 @@ msgid ""
 "screen, and [code]1.0[/code] for all other cases.\n"
 "[b]Note:[/b] This method is implemented on macOS."
 msgstr ""
+"Retourner le facteur d'échelle de l'écran spécifié à l'index. Si "
+"[code]screen[/code] est [code]-1[/code] (la valeur par défaut), l'écran "
+"actuel sera utilisé.\n"
+"[b]Note :[/b] Sur macOS la valeur retournée est [code]2.0[/code] pour les "
+"écrans hiDPI (Retina) et [code]1.0[/code] pour tous les autres écrans.\n"
+"[b]Note :[/b] Cette méthode est implémentée sous macOS."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52810,6 +53608,8 @@ msgid ""
 "Returns the amount of static memory being used by the program in bytes (only "
 "works in debug)."
 msgstr ""
+"Retourne la quantité de mémoire statique utilisée par le programme en octets "
+"(seulement pour les versions avec débogage)."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52821,6 +53621,14 @@ msgid ""
 "differentiate between app specific and shared directories. Shared "
 "directories have additional restrictions on Android."
 msgstr ""
+"Retourne le chemin réel aux dossiers couramment utilisés sur différentes "
+"plateformes. Les emplacements disponibles sont spécifiés dans [enum "
+"SystemDir].\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Android, Linux, macOS et "
+"Windows.\n"
+"[b]Note :[/b] Le stockage partagé est implémenté sur Android et permet de "
+"différencier entre les applications spécifiques et les dossiers partagés. "
+"Les dossiers partagés ont des restrictions supplémentaires sur Android."
 
 #: doc/classes/OS.xml
 msgid "Returns the epoch time of the operating system in milliseconds."
@@ -52881,11 +53689,16 @@ msgid ""
 "Deprecated, use [method Time.get_time_dict_from_system] instead.\n"
 "Returns current time as a dictionary of keys: hour, minute, second."
 msgstr ""
+"Obsolète, utilisez plutôt [method Time.get_time_dict_from_system].\n"
+"Retourne l'heure actuelle dans un dictionnaire avec les clés : \"hour\", "
+"\"minute\", \"second\"."
 
 #: doc/classes/OS.xml
 msgid ""
 "Returns the current time zone as a dictionary with the keys: bias and name."
 msgstr ""
+"Retourne l'actuel fuseau horaire dans un dictionnaire avec les clés : biais "
+"et nom."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52899,6 +53712,17 @@ msgid ""
 "[b]Note:[/b] Returns an empty string on HTML5 and UWP, as this method isn't "
 "implemented on those platforms yet."
 msgstr ""
+"Retourne une chaîne de caractères unique à l'appareil.\n"
+"[b]Note :[/b] Cette chaîne peut changer sans préavis si l'utilisateur "
+"réinstalle ou met à jour son système d'exploitation ou modifie son matériel. "
+"Cela signifie qu'il ne devrait généralement pas être utilisé pour chiffrer "
+"les données persistantes car des données enregistrées avant ce changement "
+"d'identifiant deviendront inaccessibles. La chaîne retournée peut également "
+"être modifiée manuellement en utilisant des programmes externes, donc ne pas "
+"compter sur la chaîne retournée par [method get_unique_id] pour la "
+"sécurisation.\n"
+"[b]Note :[/b] Retourne une chaîne vide sur HTML5 et UWP, car cette méthode "
+"n'est pas encore implémentée sur ces plateformes."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52908,7 +53732,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -52948,6 +53774,8 @@ msgstr ""
 #: doc/classes/OS.xml
 msgid "Returns the number of video drivers supported on the current platform."
 msgstr ""
+"Retourne le nombre de pilotes vidéo pris en charge sur la plateforme "
+"actuelle."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52955,18 +53783,25 @@ msgid ""
 "index. This index is a value from [enum VideoDriver], and you can use "
 "[method get_current_video_driver] to get the current backend's index."
 msgstr ""
+"Retourne le nom du pilote vidéo correspondant à l'index [code]driver[/code] "
+"donné. Cet index est une valeur de [enum VideoDriver], et vous pouvez "
+"utiliser [method get_current_video_driver] pour obtenir l'index du backend."
 
 #: doc/classes/OS.xml
 msgid ""
 "Returns the on-screen keyboard's height in pixels. Returns 0 if there is no "
 "keyboard or if it is currently hidden."
 msgstr ""
+"Retourne la hauteur du clavier virtuel à l'écran en pixels. Retourne 0 s'il "
+"n'y a pas de clavier ou s'il est actuellement caché."
 
 #: doc/classes/OS.xml
 msgid ""
 "Returns unobscured area of the window where interactive controls should be "
 "rendered."
 msgstr ""
+"Retourne la zone sûre de la fenêtre où les contrôles interactifs doivent "
+"être placés."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52974,18 +53809,26 @@ msgid ""
 "item to the macOS dock icon menu.\n"
 "[b]Note:[/b] This method is implemented on macOS."
 msgstr ""
+"Ajoute un nouvel élément avec le texte \"label\" au menu global. Utilisez le "
+"menu \"_dock\" pour ajouter l'élément au menu du dock sous macOS.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur macOS."
 
 #: doc/classes/OS.xml
 msgid ""
 "Add a separator between items. Separators also occupy an index.\n"
 "[b]Note:[/b] This method is implemented on macOS."
 msgstr ""
+"Ajoute un séparateur entre les éléments. Les séparateurs occupent également "
+"un index.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur macOS."
 
 #: doc/classes/OS.xml
 msgid ""
 "Clear the global menu, in effect removing all items.\n"
 "[b]Note:[/b] This method is implemented on macOS."
 msgstr ""
+"Efface le menu global, en supprimant tous les éléments.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur macOS."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52993,6 +53836,9 @@ msgid ""
 "indexes of items after the removed item are going to be shifted by one.\n"
 "[b]Note:[/b] This method is implemented on macOS."
 msgstr ""
+"Retire l'élément à l'index \"idx\" du menu global. Notez que les index des "
+"éléments après l'élément supprimé seront déplacés de un.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur macOS."
 
 #: doc/classes/OS.xml
 msgid "Returns [code]true[/code] if there is content on the clipboard."
@@ -53005,6 +53851,11 @@ msgid ""
 "[b]Note:[/b] Double-check the casing of [code]variable[/code]. Environment "
 "variable names are case-sensitive on all platforms except Windows."
 msgstr ""
+"Retourne [code]true[/code] si la variable d'environnement avec le nom "
+"[code]variable[/code] existe.\n"
+"[b]Note :[/b] Vérifiez à deux fois la casse de [code]variable[/code]. Les "
+"noms variables d'environnement sont sensibles à la casse sur toutes les "
+"plateformes sauf Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53069,6 +53920,8 @@ msgid ""
 "Returns [code]true[/code] if the input scancode corresponds to a Unicode "
 "character."
 msgstr ""
+"Retourne [code]true[/code] si le code d'entrée correspond à un caractère "
+"Unicode."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53084,6 +53937,10 @@ msgid ""
 "that its state is the same after a player quits and starts the game again. "
 "Relevant to the HTML5 platform, where this persistence may be unavailable."
 msgstr ""
+"Si [code]true[/code], le système de fichiers dans [code]user://[/code] est "
+"persistant, que son état est le même après qu'un joueur quitte et relance le "
+"jeu. Pertinent pour la plate-forme HTML5, où cette persistance peut être "
+"indisponible."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53099,12 +53956,17 @@ msgid ""
 "[b]Note:[/b] Only implemented on desktop platforms. On other platforms, it "
 "will always return [code]true[/code]."
 msgstr ""
+"Retourne [code]true[/code] si la fenêtre a actuellement le focus.\n"
+"[b]Note :[/b] Seulement implémenté sur les ordinateur de bureau. Sur "
+"d'autres plateformes, il retournera toujours [code]true[/code]."
 
 #: doc/classes/OS.xml
 msgid ""
 "Returns active keyboard layout index.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Retourne l'index de la disposition du clavier actif.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53120,6 +53982,9 @@ msgid ""
 "[code]index[/code].\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Retourne le code de langue ISO-639/BCP-47 de la disposition du clavier à la "
+"position [code]index[/code].\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53127,6 +53992,9 @@ msgid ""
 "code].\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Retourne le nom localisé de la disposition du clavier à la position "
+"[code]index[/code].\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53134,12 +54002,17 @@ msgid ""
 "keyboard layout.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Convertit un [code]scancode[/code] physique (US QWERTY) en un dans la "
+"disposition du clavier actif.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
 "Sets active keyboard layout.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Définit la disposition active du clavier.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53151,6 +54024,13 @@ msgid ""
 "[b]Note:[/b] This method is implemented on Android, iOS, Linux, macOS and "
 "Windows."
 msgstr ""
+"Tue (termine) le processus à partir de l'identifiant spécifié ([code]pid[/"
+"code]), c'est-à-dire par celui retourné par [method execute] en mode non-"
+"blocant. Voir aussi [method crash].\n"
+"[b]Note :[/b] Cette méthode peut également être utilisée pour tuer des "
+"processus qui n'ont pas été créés par le jeu.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Android, iOS, Linux, macOS "
+"et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53166,18 +54046,34 @@ msgid ""
 "OS.move_to_trash(ProjectSettings.globalize_path(file_to_remove))\n"
 "[/codeblock]"
 msgstr ""
+"Déplace le fichier ou le dossier dans la corbeille du système. Voir aussi "
+"[method Directory.remove].\n"
+"La méthode ne prend que des chemins globaux, donc vous pouvez avoir besoin "
+"d'utiliser [method ProjectSettings.globalize_path]. Ne l'utilisez pas pour "
+"les fichiers dans [code]res://[/code] car ça ne fonctionnera pas dans le "
+"projet exporté.\n"
+"[b]Note :[/b] Si l'utilisateur a désactivé la corbeille sur son système, le "
+"fichier sera définitivement supprimé.\n"
+"[codeblock]\n"
+"var file_to_remove = \"user://slot1.sav\"\n"
+"OS.move_to_trash(ProjectSettings.globalize_path(file_to_remove))\n"
+"[/codeblock]"
 
 #: doc/classes/OS.xml
 msgid ""
 "Moves the window to the front.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Déplace la fenêtre vers l'avant.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
 "Returns [code]true[/code] if native video is playing.\n"
 "[b]Note:[/b] This method is only implemented on iOS."
 msgstr ""
+"Retourne [code]true[/code] si la vidéo native joue.\n"
+"[b]Note :[/b] Cette méthode n'est implémenté que sur iOS."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53193,6 +54089,9 @@ msgid ""
 "audio and subtitle tracks.\n"
 "[b]Note:[/b] This method is only implemented on iOS."
 msgstr ""
+"Joue la vidéo native depuis le chemin spécifié, au volume donné et avec des "
+"pistes audio et sous-titres.\n"
+"[b]Note :[/b] Cette méthode n'est implémenté que sur iOS."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53215,12 +54114,17 @@ msgid ""
 "Initialises the singleton for the system MIDI driver.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Initialise le singleton pour le système de pilote MIDI.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
 "Shows all resources in the game. Optionally, the list can be written to a "
 "file by specifying a file path in [code]tofile[/code]."
 msgstr ""
+"Affiche toutes les ressources dans le jeu. En option, la liste peut être "
+"écrite à un fichier en spécifiant un chemin de fichier dans [code]tofile[/"
+"code]."
 
 #: doc/classes/OS.xml
 msgid "Shows the list of loaded textures sorted by size in memory."
@@ -53241,12 +54145,19 @@ msgid ""
 "Windows or bounce the dock icon on OSX.\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Demandez l'attention de l'utilisateur sur cette fenêtre. Ça fait clignoter "
+"le bouton de la barre de tâches sur Windows ou fait rebondir l'icône du dock "
+"sur macOS.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
 "At the moment this function is only used by [code]AudioDriverOpenSL[/code] "
 "to request permission for [code]RECORD_AUDIO[/code] on Android."
 msgstr ""
+"Pour le moment cette fonction est uniquement utilisée par "
+"[code]AudioDriverOpenSL[/code] pour demande la permission "
+"[code]RECORD_AUDIO[/code] sur Android."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53255,6 +54166,10 @@ msgid ""
 "applications.\n"
 "[b]Note:[/b] This method is implemented on Android."
 msgstr ""
+"Avec cette fonction, vous pouvez demander des permissions dangereuses "
+"puisque les autorisations normales sont automatiquement accordées à "
+"l'installation dans les applications Android.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Android."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53274,6 +54189,12 @@ msgid ""
 "dialog. Image is scaled as needed.\n"
 "[b]Note:[/b] This method is implemented on HTML5, Linux, macOS and Windows."
 msgstr ""
+"Définit l'icône du jeu en utilisant une ressource [Image].\n"
+"La même image est utilisée pour l'icône de la fenêtre, la barre de tâches ou "
+"du dock et le dialogue de sélection de la fenêtre. L'image est "
+"redimensionnée au besoin.\n"
+"[b]Note :[/b] Cette méthode est implémentée sur HTML5, Linux, macOS et "
+"Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53291,6 +54212,9 @@ msgid ""
 "Sets position of IME suggestion list popup (in window coordinates).\n"
 "[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
 msgstr ""
+"Définit la position de la fenêtre surgissante avec la liste de suggestions "
+"IME (dans les coordonnées de la fenêtre).\n"
+"[b]Note :[/b] Cette méthode est implémentée sur Linux, macOS et Windows."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53460,12 +54384,18 @@ msgid ""
 "If [code]true[/code], the engine optimizes for low processor usage by only "
 "refreshing the screen if needed. Can improve battery consumption on mobile."
 msgstr ""
+"Si [code]true[/code], le moteur réduit la consommation du processeur en "
+"rafraîchissant l'écran uniquement quand nécessaire. Peut améliorer la durée "
+"de batterie sur mobile."
 
 #: doc/classes/OS.xml
 msgid ""
 "The amount of sleeping between frames when the low-processor usage mode is "
 "enabled (in microseconds). Higher values will result in lower CPU usage."
 msgstr ""
+"La quantité d'inactivité entre les trames lorsque le mode de réduction du "
+"processeur est activé (en microsecondes). Des valeurs plus élevées "
+"limiteront l'utilisation du processeur."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53473,6 +54403,9 @@ msgid ""
 "decorations). Does not affect fullscreen mode. Set to [code](0, 0)[/code] to "
 "reset to the system default value."
 msgstr ""
+"La taille maximale de la fenêtre (sans compter les décorations du "
+"gestionnaire de fenêtre). N'affecte pas le mode plein écran. Réglez à [code]"
+"(0, 0)[/code] pour réinitialiser la valeur par défaut du système."
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53513,6 +54446,9 @@ msgid ""
 "[b]Note:[/b] Setting [code]window_borderless[/code] to [code]false[/code] "
 "disables per-pixel transparency."
 msgstr ""
+"Si [code]true[/code], supprime le cadre autour de la fenêtre.\n"
+"[b]Note :[/b] Le réglage [code]window_borderless[/code] à [code]false[/code] "
+"désactivera la transparence par pixel."
 
 #: doc/classes/OS.xml
 msgid "If [code]true[/code], the window is fullscreen."
@@ -53545,6 +54481,8 @@ msgid ""
 "The window position relative to the screen, the origin is the top left "
 "corner, +Y axis goes to the bottom and +X axis goes to the right."
 msgstr ""
+"La position de la fenêtre par rapport à l'écran, l'origine étant le coin "
+"supérieur gauche, l'axe +Y va vers le bas et l'axe +X va à droite."
 
 #: doc/classes/OS.xml
 msgid "If [code]true[/code], the window is resizable by the user."
@@ -53560,12 +54498,16 @@ msgid ""
 "The GLES2 rendering backend. It uses OpenGL ES 2.0 on mobile devices, OpenGL "
 "2.1 on desktop platforms and WebGL 1.0 on the web."
 msgstr ""
+"Le backend de rendu GLES2. Cela utilise OpenGL ES 2.0 sur les appareils "
+"mobiles, OpenGL 2.1 sur les plateformes de bureau et WebGL 1.0 sur le web."
 
 #: doc/classes/OS.xml
 msgid ""
 "The GLES3 rendering backend. It uses OpenGL ES 3.0 on mobile devices, OpenGL "
 "3.3 on desktop platforms and WebGL 2.0 on the web."
 msgstr ""
+"Le backend de rendu GLES3. Cela utilise OpenGL ES 3.0 sur les appareils "
+"mobiles, OpenGL 3.3 sur les plateformes de bureau et WebGL 2.0 sur le web."
 
 #: doc/classes/OS.xml
 msgid "Sunday."
@@ -53651,6 +54593,11 @@ msgid ""
 "implemented)\n"
 "- Android: [code]JNIEnv*[/code] of the application (not yet implemented)"
 msgstr ""
+"Les points de départ de l'application :\n"
+"- Windows : [code]HINSTANCE[/code] de l'application\n"
+"- MacOS : [code]NSApplication*[/code] de l'application (non encore "
+"implémenté)\n"
+"- Android : [code]JNIEnv*[/code] de l'application (pas encore implémenté)"
 
 #: doc/classes/OS.xml
 msgid ""
@@ -53788,7 +54735,7 @@ msgstr "Version de référence de [PackedDataContainer]."
 
 #: doc/classes/PackedScene.xml
 msgid "An abstraction of a serialized scene."
-msgstr ""
+msgstr "Une abstraction d'une scène sérialisée."
 
 #: doc/classes/PackedScene.xml
 msgid ""
@@ -53899,6 +54846,9 @@ msgid ""
 "instantiation(s). Triggers a [constant Node.NOTIFICATION_INSTANCED] "
 "notification on the root node."
 msgstr ""
+"Instancie l'arborescence de la scène. Déclenche l'instanciation des enfants "
+"de la scène. Déclenche une notification [constant Node."
+"NOTIFICATION_INSTANCED] sur le nœud racine."
 
 #: doc/classes/PackedScene.xml
 msgid ""
@@ -53918,6 +54868,8 @@ msgstr ""
 #: doc/classes/PackedScene.xml
 msgid "If passed to [method instance], blocks edits to the scene state."
 msgstr ""
+"S'il est passé à [method instance], bloque les modifications de l'état de la "
+"scène."
 
 #: doc/classes/PackedScene.xml
 msgid ""
@@ -53925,6 +54877,9 @@ msgid ""
 "scene.\n"
 "[b]Note:[/b] Only available in editor builds."
 msgstr ""
+"S'il est passé à [method instance], fournit des ressources de scène locale à "
+"la scène locale.\n"
+"[b]Note :[/b] Seulement disponible dans les éditeurs."
 
 #: doc/classes/PackedScene.xml
 msgid ""
@@ -53932,6 +54887,10 @@ msgid ""
 "scene. Only the main scene should receive the main edit state.\n"
 "[b]Note:[/b] Only available in editor builds."
 msgstr ""
+"S'il est passé à [method instance], fournit des ressources de scène locale à "
+"la scène locale. Seule la scène principale devrait recevoir l'état principal "
+"d'édition.\n"
+"[b]Note :[/b] Seulement disponible dans les éditeurs."
 
 #: doc/classes/PackedScene.xml
 msgid ""
@@ -53939,6 +54898,9 @@ msgid ""
 "scene is being instantiated to be the base of another one.\n"
 "[b]Note:[/b] Only available in editor builds."
 msgstr ""
+"C'est similaire à [constant GEN_EDIT_STATE_MAIN], mais pour le cas où la "
+"scène est instanciée pour être la base d'une autre.\n"
+"[b]Note :[/b] Seulement disponible dans les éditeurs."
 
 #: modules/gltf/doc_classes/PackedSceneGLTF.xml
 msgid ""
@@ -53947,6 +54909,10 @@ msgid ""
 "to [PackedSceneGLTF] within a script will cause an error in an exported "
 "project."
 msgstr ""
+"[b]Note :[/b] Cette classe n'est compilée que dans les éditeurs. Le "
+"chargement et l'enregistrement de glTF n'est [i]pas[/i] disponible dans les "
+"projets exportés. Les références à [PackedSceneGLTF] dans un script "
+"causeront une erreur dans les projets exportés."
 
 #: doc/classes/PacketPeer.xml
 msgid "Abstraction and base class for packet-based protocols."
@@ -54076,6 +55042,9 @@ msgid ""
 "Poll the connection to check for incoming packets. Call this frequently to "
 "update the status and keep the connection working."
 msgstr ""
+"Sondez la connexion pour vérifier les paquets entrants. Appelez cela "
+"fréquemment pour mettre à jour le statut et garder la connexion "
+"fonctionnelle."
 
 #: doc/classes/PacketPeerDTLS.xml
 msgid "A status representing a [PacketPeerDTLS] that is disconnected."
@@ -54086,6 +55055,8 @@ msgid ""
 "A status representing a [PacketPeerDTLS] that is currently performing the "
 "handshake with a remote peer."
 msgstr ""
+"Un statut représentant un [PacketPeerDTLS] qui effectue actuellement la "
+"poignée de main avec un pair distant."
 
 #: doc/classes/PacketPeerDTLS.xml
 msgid ""
@@ -54104,6 +55075,8 @@ msgid ""
 "An error status that shows a mismatch in the DTLS certificate domain "
 "presented by the host and the domain requested for validation."
 msgstr ""
+"Un statut d'erreur qui montre une erreur dans le domaine de certificat DTLS "
+"présenté par l'hôte et le domaine demandé pour validation."
 
 #: doc/classes/PacketPeerStream.xml
 msgid "Wrapper to use a PacketPeer over a StreamPeer."
@@ -54129,10 +55102,12 @@ msgstr "Homologue de paquet UDP."
 msgid ""
 "UDP packet peer. Can be used to send raw UDP packets as well as [Variant]s."
 msgstr ""
+"Un pair de paquet UDP. Peut être utilisé pour envoyer des paquets UDP bruts "
+"mais aussi des [Variant]."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid "Closes the UDP socket the [PacketPeerUDP] is currently listening on."
-msgstr ""
+msgstr "Ferme la prise UDP [PacketPeerUDP] qui est actuellement à l'écoute."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid ""
@@ -54155,18 +55130,24 @@ msgid ""
 "Returns the IP of the remote peer that sent the last packet(that was "
 "received with [method PacketPeer.get_packet] or [method PacketPeer.get_var])."
 msgstr ""
+"Retourne l'IP du pair distant qui a envoyé le dernier paquet (qui a été reçu "
+"avec [method PacketPeer.get_packet] ou [method PacketPeer.get_var])."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid ""
 "Returns the port of the remote peer that sent the last packet(that was "
 "received with [method PacketPeer.get_packet] or [method PacketPeer.get_var])."
 msgstr ""
+"Retourne le port du pair distant qui a envoyé le dernier paquet (qui a été "
+"reçu avec [method PacketPeer.get_packet] ou [method PacketPeer.get_var])."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid ""
 "Returns [code]true[/code] if the UDP socket is open and has been connected "
 "to a remote address. See [method connect_to_host]."
 msgstr ""
+"Retourne [code]true[/code] si le socket UDP est ouverte et a été connectée à "
+"une adresse distante. Voir [method connect_to_host]."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid "Returns whether this [PacketPeerUDP] is listening."
@@ -54181,12 +55162,21 @@ msgid ""
 "[b]Note:[/b] Some Android devices might require the "
 "[code]CHANGE_WIFI_MULTICAST_STATE[/code] permission for multicast to work."
 msgstr ""
+"Joins le groupe multicast spécifié par [code]multicast_address[/code] en "
+"utilisant l'interface identifiée par [code]interface_name[/code].\n"
+"Vous pouvez rejoindre le même groupe multicast avec plusieurs interfaces. "
+"Utilisez [method IP.get_local_interfaces] pour savoir lesquelles sont "
+"disponibles.\n"
+"[b]Note :[/b] Certains appareils Android pourraient nécessiter la permission "
+"[code]CHANGE_WIFI_MULTICAST_STATE[/code] pour faire fonctionner le multicast."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid ""
 "Removes the interface identified by [code]interface_name[/code] from the "
 "multicast group specified by [code]multicast_address[/code]."
 msgstr ""
+"Supprime l'interface identifiée par [code]interface_name[/code] du groupe "
+"multicast spécifié par [code]multicast_address[/code]."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid ""
@@ -54202,6 +55192,18 @@ msgid ""
 "only listen on the interface with that addresses (or fail if no interface "
 "with the given address exists)."
 msgstr ""
+"Fait que ce [PacketPeerUDP] écoute le [code]port[/code] connecté à "
+"[code]bind_address[/code] avec une taille de mémoire tampon de "
+"[code]recv_buf_size[/code].\n"
+"Si [code]bind_address[/code] est défini à [code]\"*\"[/code] (par défaut), "
+"le pair écoutera toutes les adresses disponibles (IPv4 et IPv6.)\n"
+"Si [code]bind_address[/code] est défini à [code]\"0.0.0.0\"[/code] (pour "
+"IPv4) ou [code]\"::\"[/code] (pour IPv6), le pair écoutera toutes les "
+"adresses disponibles correspondant à ce type d'IP.\n"
+"Si [code]bind_address[/code] est défini à toute adresse valide (par exemple "
+"[code]\"192.168.1.101\"[/code], [code]\"::1\"[/code], etc), le pair "
+"n'écoutera que l'interface avec ces adresses (ou échouera si aucune "
+"interface avec l'adresse donnée n'existe)."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid ""
@@ -54212,6 +55214,12 @@ msgid ""
 "[code]CHANGE_WIFI_MULTICAST_STATE[/code] permission and this option to be "
 "enabled to receive broadcast packets too."
 msgstr ""
+"Active ou désactive l'envoi de paquets de diffusion (par exemple "
+"[code]set_dest_address(\"255.255.255.255\", 4343)[/code]. Cette option est "
+"désactivée par défaut.\n"
+"[b]Note :[/b] Certains appareils Android peuvent nécessiter la permission "
+"[code]CHANGE_WIFI_MULTICAST_STATE[/code] et cette option pour être activée "
+"pour recevoir aussi des paquets de diffusion."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid ""
@@ -54220,6 +55228,11 @@ msgid ""
 "[b]Note:[/b] [method set_broadcast_enabled] must be enabled before sending "
 "packets to a broadcast address (e.g. [code]255.255.255.255[/code])."
 msgstr ""
+"Définit l'adresse de destination et le port pour envoyer des paquets et des "
+"variables. Un nom d'hôte sera résolu en utilisant le DNS si nécessaire.\n"
+"[b]Note :[/b] [method set_broadcast_enabled] doit être activé avant "
+"d'envoyer des paquets à une adresse de diffusion (par exemple "
+"[code]255.255.255[/code])."
 
 #: doc/classes/PacketPeerUDP.xml
 msgid ""
@@ -54264,6 +55277,8 @@ msgid ""
 "Panel is a [Control] that displays an opaque background. It's commonly used "
 "as a parent and container for other types of [Control] nodes."
 msgstr ""
+"Le panneau est un [Control] qui affiche un fond opaque. Il est couramment "
+"utilisé comme parent et conteneur pour d'autres types de nœuds [Control]."
 
 #: doc/classes/Panel.xml
 msgid "2D Finite State Machine Demo"
@@ -54286,6 +55301,9 @@ msgid ""
 "Panel container type. This container fits controls inside of the delimited "
 "area of a stylebox. It's useful for giving controls an outline."
 msgstr ""
+"Le type de conteneur. Ce conteneur s'adapte aux contrôles à l'intérieur de "
+"la zone délimitée d'une boîte de style. C'est utile pour donner un contour "
+"aux contrôles."
 
 #: doc/classes/PanelContainer.xml
 msgid "The style of [PanelContainer]'s background."
@@ -56030,7 +57048,6 @@ msgid "Returns the value of a damped spring joint parameter."
 msgstr ""
 
 #: doc/classes/Physics2DServer.xml
-#, fuzzy
 msgid ""
 "Sets a damped spring joint parameter. See [enum DampedStringParam] for a "
 "list of available parameters."
@@ -56402,12 +57419,10 @@ msgid "Constant to set/get whether the body can sleep."
 msgstr "La constante pour définir/obtenir si le corps peut être au repos."
 
 #: doc/classes/Physics2DServer.xml
-#, fuzzy
 msgid "Constant to create pin joints."
 msgstr "Constante pour créer des joints d’épingle."
 
 #: doc/classes/Physics2DServer.xml
-#, fuzzy
 msgid "Constant to create groove joints."
 msgstr "Constante pour créer des joints de rainure."
 
@@ -57373,7 +58388,6 @@ msgid "If [code]true[/code], the query will take [PhysicsBody]s into account."
 msgstr "Si [code]true[/code], le requête prendra les [PhysicsBody] en compte."
 
 #: doc/classes/PinJoint.xml
-#, fuzzy
 msgid "Pin joint for 3D PhysicsBodies."
 msgstr "Joint d’épingle pour les formes 3D."
 
@@ -57402,7 +58416,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PinJoint2D.xml
-#, fuzzy
 msgid "Pin Joint for 2D shapes."
 msgstr "Joint d’épingle pour les formes 2D."
 
@@ -58810,8 +59823,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+#, fuzzy
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
+"Retourne la position de l’élément qui a actuellement le focus. Ou retourne "
+"[code]-1[/code] si aucun n'a le focus."
 
 #: doc/classes/PopupMenu.xml
 msgid "Hides the [PopupMenu] when the window loses focus."
@@ -59067,7 +60085,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -59605,8 +60625,8 @@ msgid ""
 "Returns the specified property's initial value. Returns [code]null[/code] if "
 "the property does not exist."
 msgstr ""
-"Retourne la valeur initiale de la propriété spécifiée. Retourne "
-"[code]null[/code] si la propriété n'existe pas."
+"Retourne la valeur initiale de la propriété spécifiée. Retourne [code]null[/"
+"code] si la propriété n'existe pas."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -59731,9 +60751,9 @@ msgid ""
 "nearest-neighbor interpolation (recommended for pixel art)."
 msgstr ""
 "Si [code]true[/code], applique le filtrage linéaire pour l'étirement de "
-"l'image (recommandé pour les images à haute résolution.) Si "
-"[code]false[/code], utilise l'interpolation la plus proche (recommandée pour "
-"le pixel-art)."
+"l'image (recommandé pour les images à haute résolution.) Si [code]false[/"
+"code], utilise l'interpolation la plus proche (recommandée pour le pixel-"
+"art)."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -59748,9 +60768,9 @@ msgid ""
 "for this to take effect."
 msgstr ""
 "Ce dossier utilisateur est utilisé pour stocker des données persistantes (le "
-"système de fichiers [code]user://[/code]). Si laissé vide, "
-"[code]user://[/code] va pointer vers un dossier spécifique au projet suivant "
-"la configuration de Godot (voir [method OS.get_user_data_dir]). Si un nom de "
+"système de fichiers [code]user://[/code]). Si laissé vide, [code]user://[/"
+"code] va pointer vers un dossier spécifique au projet suivant la "
+"configuration de Godot (voir [method OS.get_user_data_dir]). Si un nom de "
 "dossier personnalisé est défini, ce nom sera utilisé à la place, puis ajouté "
 "au dossier de données utilisateur spécifique au système (le même dossier "
 "parent que celui configuration Godot documenté dans [method OS."
@@ -59830,9 +60850,9 @@ msgid ""
 "default can impact compatibility with some external tools or plugins which "
 "expect the default [code].import[/code] folder."
 msgstr ""
-"Si [code]true[/code], le projet utilisera un dossier caché ([code]."
-"import[/code]) pour stocker des données spécifiques au projet (métadonnées, "
-"cache des shaders, etc.)\n"
+"Si [code]true[/code], le projet utilisera un dossier caché ([code].import[/"
+"code]) pour stocker des données spécifiques au projet (métadonnées, cache "
+"des shaders, etc.)\n"
 "Si [code]false[/code], un dossier non caché ([code]import[/code]) sera "
 "utilisé à la place.\n"
 "[b]Note :[/b] Vous devez redémarrer l'application après avoir modifié ce "
@@ -59961,7 +60981,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -61807,9 +62831,9 @@ msgid ""
 "Desktop override for [member logging/file_logging/enable_file_logging], as "
 "log files are not readily accessible on mobile/Web platforms."
 msgstr ""
-"Le surcharge du bureau pour [member logging/file_logging/enable_file_logging]"
-", car les fichiers de journaux ne sont pas facilement accessibles sur les "
-"plateformes mobiles et web."
+"Le surcharge du bureau pour [member logging/file_logging/"
+"enable_file_logging], car les fichiers de journaux ne sont pas facilement "
+"accessibles sur les plateformes mobiles et web."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -61857,42 +62881,57 @@ msgid ""
 "map_set_cell_height].\n"
 "[b]Note:[/b] Currently not implemented."
 msgstr ""
+"La hauteur de la cellule par défaut pour les cartes de navigation 2D. Voir "
+"[method Navigation2DServer.map_set_cell_height]\n"
+"[b]Note :[/b] N'est pas actuellement implémenté."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Default cell size for 2D navigation maps. See [method Navigation2DServer."
 "map_set_cell_size]."
 msgstr ""
+"La taille par défaut pour les cartes de navigation 2D. Voir [method "
+"Navigation2DServer.map_set_cell_size]."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Default edge connection margin for 2D navigation maps. See [method "
 "Navigation2DServer.map_set_edge_connection_margin]."
 msgstr ""
+"La marge par défaut de connexion des bordures pour les cartes de navigation "
+"2D. Voir [method Navigation2DServer.map_set_edge_connection_margin]."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Default cell height for 3D navigation maps. See [method NavigationServer."
 "map_set_cell_height]."
 msgstr ""
+"La hauteur par défaut pour les cartes de navigation 3D. Voir [method "
+"NavigationServer.map_set_cell_height]."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Default cell size for 3D navigation maps. See [method NavigationServer."
 "map_set_cell_size]."
 msgstr ""
+"La taille par défaut pour les cartes de navigation 3D. Voir [method "
+"NavigationServer.map_set_cell_size]."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Default edge connection margin for 3D navigation maps. See [method "
 "NavigationServer.map_set_edge_connection_margin]."
 msgstr ""
+"La marge par défaut de connexion des bodures pour les cartes de navigation "
+"3D. Voir [method NavigationServer.map_set_edge_connection_margin]."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Default map up vector for 3D navigation maps. See [method NavigationServer."
 "map_set_up]."
 msgstr ""
+"La carte par défaut du vecteur vers haut pour cartes de navigation 3D. Voir "
+"[method NavigationServer.map_set_up]."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -61900,6 +62939,9 @@ msgid ""
 "Over this value, content is dropped. This helps not to stall the debugger "
 "connection."
 msgstr ""
+"La quantité maximale de caractères autorisés à envoyer sur la sortie du "
+"débogueur. Une fois cette valeur dépassée, le nouveau contenu est ignoré. "
+"Cela aide à ne pas bloquer la connexion du déboguer."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -61907,6 +62949,9 @@ msgid ""
 "Over this value, content is dropped. This helps not to stall the debugger "
 "connection."
 msgstr ""
+"Le nombre maximum d'erreurs autorisées à être envoyées à la sortie du "
+"débogueur. Une fois cette valeur dépassée, le nouveau contenu est ignoré. "
+"Cela aide à ne pas bloquer la connexion du déboguer."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -61914,6 +62959,9 @@ msgid ""
 "this value, content is dropped. This helps not to stall the debugger "
 "connection."
 msgstr ""
+"La quantité maximale de messages autorisés à être envoyés à la sortie du "
+"débogueur. Une fois cette valeur dépassée, le nouveau contenu est ignoré. "
+"Cela aide à ne pas bloquer la connexion du déboguer."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -61921,6 +62969,9 @@ msgid ""
 "Over this value, content is dropped. This helps not to stall the debugger "
 "connection."
 msgstr ""
+"Le nombre maximal d'avertissements autorisés à être envoyés à la sortie du "
+"débogueur. Une fois cette valeur dépassée, le nouveau contenu est ignoré. "
+"Cela aide à ne pas bloquer la connexion du déboguer."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -61928,6 +62979,10 @@ msgid ""
 "specified as a power of two). The default value [code]16[/code] is equal to "
 "65,536 bytes. Over this size, data is dropped."
 msgstr ""
+"La taille par défaut du flux par paire de paquets pour décoder les données "
+"Godot (en octets, spécifié par une puissance de deux). La valeur par défaut "
+"[code]16[/code] est égale à 65 536 octets. Une fois cette valeur dépassée, "
+"le nouveau contenu est ignoré."
 
 #: doc/classes/ProjectSettings.xml
 msgid "Timeout (in seconds) for connection attempts using TCP."
@@ -61937,6 +62992,8 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid "Maximum size (in kiB) for the [WebRTCDataChannel] input buffer."
 msgstr ""
+"La taille maximale (en kiB) de la mémoire du tampon d'entrée du "
+"[WebRTCDataChannel]."
 
 #: doc/classes/ProjectSettings.xml
 msgid "Maximum size (in kiB) for the [WebSocketClient] input buffer."
@@ -61985,6 +63042,9 @@ msgid ""
 "Amount of read ahead used by remote filesystem. Higher values decrease the "
 "effects of latency at the cost of higher bandwidth usage."
 msgstr ""
+"La quantité de lecture en avance utilisée par le système de fichiers "
+"distants. Des valeurs plus élevées diminuent les effets de latence mais "
+"augmentent la bande passante."
 
 #: doc/classes/ProjectSettings.xml
 msgid "Page size used by remote filesystem (in bytes)."
@@ -61999,18 +63059,28 @@ msgid ""
 "bundle will be used.\n"
 "If in doubt, leave this setting empty."
 msgstr ""
+"Le pack de certificats CA à utiliser pour les connexions SSL. Si cela est "
+"défini à une valeur non vide, cela [i]écrasera[/i] les certificats par "
+"défaut de Godot venant du [url=https://github.com/godotengine/godot/blob/"
+"master/third/certs/ca-certificates.crt]Pack de certificats de Mozilla[/ur]. "
+"Si laissé vide, ce paquet de certificat par défaut sera utilisé.\n"
+"En cas de doute, laissez ce réglage vide."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "When creating node names automatically, set the type of casing in this "
 "project. This is mostly an editor setting."
 msgstr ""
+"Lorsque vous créez des noms de nœuds automatiquement, définissez le type de "
+"casse dans ce projet. C'est surtout un réglage de l'éditeur."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "What to use to separate node name from number. This is mostly an editor "
 "setting."
 msgstr ""
+"Que faire pour séparer le nom de nœud du numéro. C'est surtout un réglage de "
+"l'éditeur."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62066,6 +63136,14 @@ msgid ""
 "Physics2DServer.AREA_PARAM_GRAVITY, 98)\n"
 "[/codeblock]"
 msgstr ""
+"La force de gravité par défaut en 2D (en pixels par seconde au carré).\n"
+"[b]Note :[/b] Cette propriété est seulement lue au lancement du projet. Pour "
+"modifier la gravité par défaut à l'exécution, utilisez le code suivant :\n"
+"[codeblock]\n"
+"# Réglez la force de gravité par défaut à 98.\n"
+"Physics2DServer.area_set_param(get_viewport().find_world_2d().get_space(), "
+"Physics2DServer.AREA_PARAM_GRAVITY, 98)\n"
+"/[codeblock]"
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62078,6 +63156,14 @@ msgid ""
 "Physics2DServer.AREA_PARAM_GRAVITY_VECTOR, Vector2(0, 1))\n"
 "[/codeblock]"
 msgstr ""
+"La direction de la gravité par défaut en 2D.\n"
+"[b]Note :[/b] Cette propriété est seulement lue au lancement du projet. Pour "
+"modifier la gravité par défaut à l'exécution, utilisez le code suivant :\n"
+"[codeblock]\n"
+"# Définir la direction de gravité par défaut à `Vector2(0, 1)`.\n"
+"Physics2DServer.area_set_param(get_viewport().find_world_2d().get_space(), "
+"Physics2DServer.AREA_PARAM_GRAVITY_VECTOR, Vector2(0, 1))\n"
+"/[codeblock]"
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62139,18 +63225,25 @@ msgid ""
 "Time (in seconds) of inactivity before which a 2D physics body will put to "
 "sleep. See [constant Physics2DServer.SPACE_PARAM_BODY_TIME_TO_SLEEP]."
 msgstr ""
+"Le temps (en secondes) d'inactivité avant lequel un corps de physique 2D "
+"s'endormira. Voir [Constant Physics2DServer.SPACE_PARAM_BODY_TIME_TO_SLEEP]."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Enables the use of bounding volume hierarchy instead of hash grid for 2D "
 "physics spatial partitioning. This may give better performance."
 msgstr ""
+"Permet l'utilisation de la hiérarchie de volume englobant au lieu de la "
+"grille de hachage pour le partitionnement spatial physique 2D. Cela peut "
+"donner des meilleures performances."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Sets whether the 3D physics world will be created with support for "
 "[SoftBody] physics. Only applies to the Bullet physics engine."
 msgstr ""
+"Définit si le monde de physique 3D sera créé avec le support de la physique "
+"[SoftBody]. Seulement s'applique au moteur de physique Bullet."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62393,6 +63486,8 @@ msgid ""
 "When batching is on, this regularly prints a frame diagnosis log. Note that "
 "this will degrade performance."
 msgstr ""
+"Lors de l'affichage en lots, cela affichera régulièrement un diagnostic des "
+"trames. À noter que cela dégrade les performances."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62440,10 +63535,12 @@ msgid ""
 "Turns 2D batching on and off. Batching increases performance by reducing the "
 "amount of graphics API drawcalls."
 msgstr ""
+"Active ou désactive l'affichage 2D par lots. son activation augmente la "
+"performance en réduisant la quantité d'appels de dessins sur API."
 
 #: doc/classes/ProjectSettings.xml
 msgid "Switches on 2D batching within the editor."
-msgstr ""
+msgstr "Active l'affichage 2D par lots dans l'éditeur."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62451,6 +63548,10 @@ msgid ""
 "batches, but there are diminishing returns for the memory used. This should "
 "only have a minor effect on performance."
 msgstr ""
+"La taille de la mémoire tampon réservé aux sommets par lots. Une plus grande "
+"taille permet des lots plus importants, mais le rapport avec la mémoire "
+"utilisée est plus faible. Cela ne devrait avoir qu'une petite influence sur "
+"les performances."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62460,6 +63561,12 @@ msgid ""
 "code] above which vertices will be translated to colored format. A value of "
 "0 will always use colored vertices, 1 will never use colored vertices."
 msgstr ""
+"Inclure la couleur dans le format des sommets a un coût, cependant, ne pas "
+"l'inclure empêche le gestion par lots à travers les changements de couleur. "
+"Ce seuil détermine le rapport de [code]nombre de changements de couleur / "
+"nombre total de sommets[/code] à partir duquel les sommets auront un format "
+"avec la couleur. Une valeur de 0 utilisera toujours des sommets colorés, et "
+"1 n'en utilisera jamais."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62713,6 +63820,11 @@ msgid ""
 "You may want to do that since mobile GPUs generally won't support "
 "ubershaders due to their complexity."
 msgstr ""
+"Une surcharge pour [member rendering/gles3/shaders/shader_compilation_mode], "
+"de sorte que la compilation asynchrone peut être désactivée sur les plates-"
+"formes mobiles.\n"
+"Vous voudrez peut-être le faire puisque les GPU des mobiles ne supportent en "
+"général pas les ubershaders en raison de leur complexité."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62721,6 +63833,12 @@ msgid ""
 "You may want to do that since certain browsers (especially on mobile "
 "platforms) generally won't support ubershaders due to their complexity."
 msgstr ""
+"Une surcharge pour [member rendering/gles3/shaders/shader_compilation_mode], "
+"de sorte que la compilation asynchrone peut être désactivée sur les "
+"plateformes web.\n"
+"Vous pouvez vouloir le faire puisque certains navigateurs (surtout sur les "
+"plates-formes mobiles) ne supportent en général pas les ubershaders en "
+"raison de leur complexité."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62751,8 +63869,8 @@ msgid ""
 "Max buffer size for drawing immediate objects (ImmediateGeometry nodes). "
 "Nodes using more than this size will not work."
 msgstr ""
-"La capacity maximale de la mémoire tampon pour le dessin d'objets immédiats ("
-"les nœuds ImmediateGeometry). Les nœuds utilisant plus que cette taille ne "
+"La capacity maximale de la mémoire tampon pour le dessin d'objets immédiats "
+"(les nœuds ImmediateGeometry). Les nœuds utilisant plus que cette taille ne "
 "fonctionneront pas."
 
 #: doc/classes/ProjectSettings.xml
@@ -63009,8 +64127,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -63092,6 +64221,9 @@ msgid ""
 "Lower-end override for [member rendering/quality/lightmapping/"
 "use_bicubic_sampling] on mobile devices, in order to reduce bandwidth usage."
 msgstr ""
+"Une surcharge pour les appareils d'entrée de gamme, comme les appareils "
+"mobiles, pour [member rendering/quality/lightmapping/use_bicubic_sampling], "
+"afin de réduire l'utilisation de bande passante."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63099,12 +64231,18 @@ msgid ""
 "higher visual quality, while a smaller size will be faster and take up less "
 "memory."
 msgstr ""
+"La taille des atlas utilisés par les sondes de réflexion. Une taille plus "
+"grande peut entraîner une qualité visuelle plus élevée, tandis qu'une taille "
+"plus petite sera plus rapide et prendre moins de mémoire."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "Number of subdivisions to use for the reflection atlas. A higher number "
 "lowers the quality of each atlas, but allows you to use more."
 msgstr ""
+"Le nombre de sous-divisions à utiliser pour l'atlas de réflexion. Un nombre "
+"plus élevé réduit la qualité de chaque atlas, mais vous permet d'en utiliser "
+"plus."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63112,6 +64250,10 @@ msgid ""
 "variants of reflection probes and panorama backgrounds (sky). Those blurred "
 "variants are used by rough materials."
 msgstr ""
+"Si [code]true[/code], utilise une grande quantité d'échantillons pour créer "
+"des variantes floues de sondes de réflexion et d'arrière-plans panoramiques "
+"(les ciels). Ces variantes floues sont utilisées par des matériaux avec "
+"rugosité."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63119,6 +64261,9 @@ msgid ""
 "high_quality_ggx] on mobile devices, due to performance concerns or driver "
 "support."
 msgstr ""
+"Une surcharge pour les appareils d'entrée de gamme, comme les appareils "
+"mobiles, pour [member rendering/quality/reflections/high_quality_ggx], à "
+"cause des potentiels soucis liés aux performances ou aux pilotes."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63137,6 +64282,10 @@ msgid ""
 "probes and panorama backgrounds (sky). This reduces jitter noise on "
 "reflections, but costs more performance and memory."
 msgstr ""
+"Si [code]true[/code], utilise des tableaux de texture au lieu de mipmaps "
+"pour les sondes de réflexion et les arrière-plans en panorama (ciel). Cela "
+"réduit les effets de bruit \"jitter\" sur les réflexions, mais à réduit les "
+"performances et augmente la mémoire utilisée."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63144,12 +64293,18 @@ msgid ""
 "texture_array_reflections] on mobile devices, due to performance concerns or "
 "driver support."
 msgstr ""
+"Une surcharge pour les appareils d'entrée de gamme, comme les appareils "
+"mobiles, pour [member rendering/quality/reflections/"
+"texture_array_reflections], à cause des potentiels soucis liés aux "
+"performances ou aux pilotes."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], uses faster but lower-quality Blinn model to generate "
 "blurred reflections instead of the GGX model."
 msgstr ""
+"Si [code]true[/code], utilise le modèle Blinn plus rapide mais de moins "
+"bonne qualité pour générer des réflexions floues au lieu du modèle GGX."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63157,12 +64312,17 @@ msgid ""
 "force_blinn_over_ggx] on mobile devices, due to performance concerns or "
 "driver support."
 msgstr ""
+"Une surcharge pour les appareils d'entrée de gamme, comme les appareils "
+"mobiles, pour [member rendering/quality/shading/force_blinn_over_ggx], à "
+"cause des potentiels soucis liés aux performances ou aux pilotes."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], uses faster but lower-quality Lambert material "
 "lighting model instead of Burley."
 msgstr ""
+"Si [code]true[/code], utilise le modèle d'éclairage de matériaux Lambert "
+"plus rapide mais de qualité inférieure au modèle Burley."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63170,6 +64330,9 @@ msgid ""
 "force_lambert_over_burley] on mobile devices, due to performance concerns or "
 "driver support."
 msgstr ""
+"Une surcharge pour les appareils d'entrée de gamme, comme les appareils "
+"mobiles, pour [member rendering/quality/shading/force_lambert_over_burley], "
+"à cause des potentiels soucis liés aux performances ou aux pilotes."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63337,6 +64500,11 @@ msgid ""
 "Try enabling this option if you see any visual anomalies in 3D (such as "
 "incorrect object visibility)."
 msgstr ""
+"Si [code]true[/code], une version sûre du BVH (\"Bounding Volume "
+"Hierarchy\") entre fils d'exécution sera utilisée dans le rendu et la "
+"physique de Godot.\n"
+"Essayez d'activer cette option si vous voyez des anomalies visuelles en 3D "
+"(comme un visibilité incorrecte pour un objet)."
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63463,9 +64631,9 @@ msgstr ""
 "exemple :\n"
 "[codeblock]\n"
 "var tween = get_tree().create_tween()\n"
-"tween.tween_property(self, \"position\", Vector2(200, 100), 1).from(Vector2("
-"100, 100) # Ça déplacera le nœud de la position (100, 100) jusqu'à (200, 100)"
-"\n"
+"tween.tween_property(self, \"position\", Vector2(200, 100), 1)."
+"from(Vector2(100, 100) # Ça déplacera le nœud de la position (100, 100) "
+"jusqu'à (200, 100)\n"
 "/[codeblock]"
 
 #: doc/classes/PropertyTweener.xml
@@ -63486,10 +64654,10 @@ msgstr ""
 "départ. Ceci est pareil que [method from] avec la valeur actuelle. Ces deux "
 "appels sont identiques :\n"
 "[codeblock]\n"
-"tween.tween_property(self, \"position\", Vector2(200, 100), 1).from(position)"
-"\n"
-"tween.tween_property(self, \"position\", Vector2(200, 100), 1).from_current()"
-"\n"
+"tween.tween_property(self, \"position\", Vector2(200, 100), 1)."
+"from(position)\n"
+"tween.tween_property(self, \"position\", Vector2(200, 100), 1)."
+"from_current()\n"
 "/[codeblock]"
 
 #: doc/classes/PropertyTweener.xml
@@ -63621,6 +64789,13 @@ msgid ""
 "[b]Note:[/b] This signal is [i]not[/i] emitted by default, as the default "
 "[member dispatch_mode] is [constant MODE_PROXY]."
 msgstr ""
+"Émis lorsque l'utilisateur appelle la méthode [method broadcast] et a défini "
+"[member dispatch_mode] à [constant MODE_SIGNAL].\n"
+"La méthode donnée et ses paramètres sont transmis aux objets qui sont "
+"connectés au signal de cet objet, ainsi qu'à tout nœud [ProximityGroup] où "
+"ce nœud est groupé avec.\n"
+"[b]Note :[/b] Ce signal n'est [i]pas[/i] émis par défaut, car le [member "
+"dispatch_mode] par défaut est [constant MODE_PROXY]."
 
 #: doc/classes/ProximityGroup.xml
 msgid "This [ProximityGroup]'s parent will be target of [method broadcast]."
@@ -63685,6 +64860,10 @@ msgid ""
 "angles (in the YXZ convention: when decomposing, first Z, then X, and Y "
 "last), given in the vector format as (X angle, Y angle, Z angle)."
 msgstr ""
+"Construit un quaternion qui effectuera une rotation spécifiée par les angles "
+"d'Euler (suivant la convention YXZ : lors de la décomposition, d'abord Z, "
+"puis X, et enfin Y), donnée dans le format vectoriel comme (angle X, angle "
+"Y, angle Z)."
 
 #: doc/classes/Quat.xml
 msgid ""
@@ -63778,8 +64957,8 @@ msgid ""
 "convention: when decomposing, first Z, then X, and Y last), given in the "
 "vector format as (X angle, Y angle, Z angle)."
 msgstr ""
-"Définit le quaternion avec une rotation spécifiée par les angles d'Euler ("
-"selon la convention YXZ : lors de la décomposition, d'abord Z, puis X, et "
+"Définit le quaternion avec une rotation spécifiée par les angles d'Euler "
+"(selon la convention YXZ : lors de la décomposition, d'abord Z, puis X, et "
 "enfin Y), donnée dans le format vectoriel comme (angle X, angle Y, angle Z)."
 
 #: doc/classes/Quat.xml
@@ -63789,8 +64968,8 @@ msgid ""
 "[b]Note:[/b] Both quaternions must be normalized."
 msgstr ""
 "Retourne le résultat de l'interpolation linéaire sphérique entre ce "
-"quaternion et [code]to[/code] par la quantité [code]weight[/code] spécifiée."
-"\n"
+"quaternion et [code]to[/code] par la quantité [code]weight[/code] "
+"spécifiée.\n"
 "[b]Note :[/b] Les deux quaternions doivent être normalisés."
 
 #: doc/classes/Quat.xml
@@ -64023,11 +65202,11 @@ msgid ""
 "configured [member step] and [member page] size. See e.g. [ScrollBar] and "
 "[Slider] for examples of higher level nodes using Range."
 msgstr ""
-"Range est une classe de base des nœuds [Control] qui change une "
-"[code]value[/code] flottante entre le [code]minimum[/code] et le "
-"[code]maximum[/code], par étape [code]step[/code] et par [code]page[/code], "
-"par exemple un [ScrollBar]. Voir [ScrollBar] et [Slider] pour des exemples "
-"de nœuds de haut niveau utilisant des Range."
+"Range est une classe de base des nœuds [Control] qui change une [code]value[/"
+"code] flottante entre le [code]minimum[/code] et le [code]maximum[/code], "
+"par étape [code]step[/code] et par [code]page[/code], par exemple un "
+"[ScrollBar]. Voir [ScrollBar] et [Slider] pour des exemples de nœuds de haut "
+"niveau utilisant des Range."
 
 #: doc/classes/Range.xml
 msgid ""
@@ -64108,6 +65287,10 @@ msgid ""
 "[code]value[/code] will first be rounded to a multiple of [code]step[/code] "
 "then rounded to the nearest integer."
 msgstr ""
+"Si supérieure à 0, [code]value[/code] sera toujours arrondie à un multiple "
+"de [code]step[/code]. Si [code]rounded[/code] est également [code]true[/"
+"code], [code]value[/code] sera d'abord arrondie à un multiple de [code]step[/"
+"code] puis arrondie à l'entier le plus proche."
 
 #: doc/classes/Range.xml
 msgid "Range's current value."
@@ -64131,6 +65314,14 @@ msgid ""
 "value_changed] is also emitted when [code]value[/code] is set directly via "
 "code."
 msgstr ""
+"Émis quand [member value] change. Lorsqu'il est utilisé pour un [Slider], "
+"cela s'appelle en continu lors du glissage (voire à chaque trame). Si vous "
+"effectuez une opération coûteuse dans une fonction connectée à [signal "
+"value_changed], essayez d'utiliser un [Timer] pour appeler la fonction moins "
+"souvent.\n"
+"[b]Note :[/b] Contrairement aux signaux tels que [signal LineEdit."
+"text_changed], [signal value_changed] est également émis lorsque "
+"[code]value[/code] est défini directement par code."
 
 #: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
 msgid "Query the closest object intersecting a ray."
@@ -64159,12 +65350,16 @@ msgid ""
 "Adds a collision exception so the ray does not report collisions with the "
 "specified node."
 msgstr ""
+"Ajoute une exception de collision afin que le rayon ne signale pas les "
+"collisions avec le nœud spécifié."
 
 #: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
 msgid ""
 "Adds a collision exception so the ray does not report collisions with the "
 "specified [RID]."
 msgstr ""
+"Ajoute une exception de collision de sorte que le rayon ne signale pas les "
+"collisions avec le [RID] spécifié."
 
 #: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
 msgid "Removes all collision exceptions for this ray."
@@ -64178,6 +65373,12 @@ msgid ""
 "changed state.\n"
 "[b]Note:[/b] [code]enabled[/code] is not required for this to work."
 msgstr ""
+"Met à jour les informations de collision pour le rayon. Utilisez cette "
+"méthode pour mettre à jour les informations de collision immédiatement au "
+"lieu d'attendre le prochain appel à [code]_physics_process[/code], par "
+"exemple si le rayon ou son parent a changé d'état.\n"
+"[b]Note :[/b] [code]enabled[/code] n'est pas nécessaire pour que cela "
+"fonctionne."
 
 #: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
 msgid ""
@@ -64185,6 +65386,9 @@ msgid ""
 "object is intersecting the ray (i.e. [method is_colliding] returns "
 "[code]false[/code])."
 msgstr ""
+"Retourne le premier objet que le rayon intersecte, ou [code]null[/code] si "
+"aucun objet n'intersecte le rayon (c'est-à-dire [method is_colliding] "
+"retourne [code]false[/code])."
 
 #: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
 msgid ""
@@ -64214,10 +65418,10 @@ msgid ""
 "Returns the collision point at which the ray intersects the closest object.\n"
 "[b]Note:[/b] This point is in the [b]global[/b] coordinate system."
 msgstr ""
-"Retourne le point de collision où le rayon intersecte l'objet le plus proche."
-"\n"
-"[b]Note :[/b] Ce point se trouve dans le système de coordonnées "
-"[b]global[/b]."
+"Retourne le point de collision où le rayon intersecte l'objet le plus "
+"proche.\n"
+"[b]Note :[/b] Ce point se trouve dans le système de coordonnées [b]global[/"
+"b]."
 
 #: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
 msgid ""
@@ -64422,8 +65626,8 @@ msgid ""
 "are positive."
 msgstr ""
 "Retourne un [Rect2] avec la même position et aire, modifié de sorte que le "
-"coin supérieur gauche est l'origine et [code]width[/code] et "
-"[code]height[/code] soient positifs."
+"coin supérieur gauche est l'origine et [code]width[/code] et [code]height[/"
+"code] soient positifs."
 
 #: doc/classes/Rect2.xml
 msgid "Returns the intersection of this [Rect2] and b."
@@ -64450,8 +65654,8 @@ msgstr ""
 "[codeblock]\n"
 "# position (-3, 2), size (1, 1)\n"
 "var rect = Rect2(Vector2(-3, 2), Vector2(1, 1))\n"
-"# position (-3, -1), size (3, 4), contient donc à la fois `rect` et Vector2("
-"0, -1)\n"
+"# position (-3, -1), size (3, 4), contient donc à la fois `rect` et "
+"Vector2(0, -1)\n"
 "var rect2 = rect.expand(Vector2(0, -1))\n"
 "/[codeblock]"
 
@@ -64498,8 +65702,8 @@ msgid ""
 "[b]Note:[/b] If the [Rect2] has a negative size and is not flat or empty, "
 "[method has_no_area] will return [code]true[/code]."
 msgstr ""
-"Retourne [code]true[/code] si le [Rect2] est plat ou vide, ou "
-"[code]false[/code] sinon. Voir aussi [method get_area].\n"
+"Retourne [code]true[/code] si le [Rect2] est plat ou vide, ou [code]false[/"
+"code] sinon. Voir aussi [method get_area].\n"
 "[b]Note :[/b] Si le [Rect2] a une taille négative et n'est pas plat ou vide, "
 "[method has_no_area] retournera [code]true[/code]."
 
@@ -66292,8 +67496,8 @@ msgid ""
 "See [member ProjectSettings.physics/3d/default_angular_damp] for more "
 "details about damping."
 msgstr ""
-"Amortit les forces de rotation du corps. Si cette valeur est différente de -"
-"1.0, elle sera ajoutée aux amortissements obtenues du monde et des aires.\n"
+"Amortit les forces de rotation du corps. Si cette valeur est différente de "
+"-1.0, elle sera ajoutée aux amortissements obtenues du monde et des aires.\n"
 "Voir [membre ProjectSettings.physics/3d/default_angular_damp] pour plus de "
 "détails sur l'amortissement."
 
@@ -67448,7 +68652,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -67609,18 +68815,20 @@ msgstr "La scène actuelle."
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
-"Si [code]true[/code], les formes des collisions seront visibles lors du "
-"lancement du jeu depuis l'éditeur pour aider au débogage."
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
-"Si [code]true[/code], les polygones de navigation seront visibles lors du "
-"lancement du jeu depuis l'éditeur pour aider au débogage."
 
 #: doc/classes/SceneTree.xml
 msgid "The root of the edited scene."
@@ -67912,7 +69120,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "[SceneTreeTween] is a tween managed by the scene tree. As opposed to "
 "[Tween], it does not require the instantiation of a node.\n"
@@ -68425,14 +69632,14 @@ msgstr ""
 "tween.tween_property($Sprite, \"position\", Vector2(200, 300), 1)\n"
 "[/codeblock]\n"
 "déplacera la sprite de sa position actuelle à la position (100, 200) puis "
-"ensuite à (200, 300). Si vous utilisez [method PropertyTweener.from] ou ["
-"method PropertyTweener.from_current], la position de départ sera celle "
+"ensuite à (200, 300). Si vous utilisez [method PropertyTweener.from] ou "
+"[method PropertyTweener.from_current], la position de départ sera celle "
 "spécifiée et non l'actuelle. Voir les autres méthodes de [PropertyTweener] "
 "pour connaitre les possibilités.\n"
 "[b]Note :[/b] Vous pouvez trouver les noms corrects des propriétés en "
 "survolant ces propriétés dans l'inspecteur de Godot. Vous pouvez aussi "
-"fournir un seul composant de cette propriété directement en utilisant [code]"
-"\"property:component\"[/code] (ex. [code]position:x[/code]), alors "
+"fournir un seul composant de cette propriété directement en utilisant "
+"[code]\"property:component\"[/code] (ex. [code]position:x[/code]), alors "
 "l'interpolation ne se fera que sur cet unique composant.\n"
 "Exemple : déplacer un objet deux fois depuis la même position vers "
 "différentes positions, avec différents types de transition.\n"
@@ -69036,8 +70243,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
-msgstr "Le biais du solveur personnalisé de la forme."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
+msgstr ""
 
 #: doc/classes/ShortCut.xml
 msgid "A shortcut for binding input."
@@ -69414,6 +70624,8 @@ msgid ""
 "If [code]true[/code], the slider can be interacted with. If [code]false[/"
 "code], the value can be changed only by code."
 msgstr ""
+"Si [code]true[/code], l'utilisateur peut intéragir avec le curseur. Si "
+"[code]false[/code], la valeur ne peut être modifiée que par code."
 
 #: doc/classes/Slider.xml
 msgid "If [code]true[/code], the value can be changed using the mouse wheel."
@@ -69426,12 +70638,16 @@ msgid ""
 "Number of ticks displayed on the slider, including border ticks. Ticks are "
 "uniformly-distributed value markers."
 msgstr ""
+"Le nombre de marqueurs affichées sur le curseur, y compris les marqueurs sur "
+"les bords. Les marqueurs représentent des valeurs distribués uniformément."
 
 #: doc/classes/Slider.xml
 msgid ""
 "If [code]true[/code], the slider will display ticks for minimum and maximum "
 "values."
 msgstr ""
+"Si [code]true[/code], le curseur affichera des marqueurs pour les valeurs "
+"minimales et maximales."
 
 #: doc/classes/Slider.xml
 msgid ""
@@ -69614,6 +70830,8 @@ msgid ""
 "Returns the parent [Spatial], or an empty [Object] if no parent exists or "
 "parent is not of type [Spatial]."
 msgstr ""
+"Retourne le [Spatial] parent, ou un [Object] vide si aucun parent n'existe "
+"ou si le parent n'est pas de type [Spatial]."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69626,6 +70844,9 @@ msgid ""
 "Rotates the global (world) transformation around axis, a unit [Vector3], by "
 "specified angle in radians. The rotation axis is in global coordinate system."
 msgstr ""
+"Pivote la transformation globale autour de l'axe, un [Vector3] unitaire, par "
+"angle spécifié en radians. L'axe de rotation est dans le système de "
+"coordonnées global."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69640,6 +70861,8 @@ msgid ""
 "Moves the global (world) transformation by [Vector3] offset. The offset is "
 "in global coordinate system."
 msgstr ""
+"Déplace la transformation globale par le décalage [Vector3 offset]. Le "
+"décalage est dans le système de coordonnées global."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69653,12 +70876,16 @@ msgid ""
 "Returns whether node notifies about its local transformation changes. "
 "[Spatial] will not propagate this by default."
 msgstr ""
+"Retourne si le nœud notifie ses changements de transformation locale. "
+"[Spatial] ne le propage pas par défaut."
 
 #: doc/classes/Spatial.xml
 msgid ""
 "Returns whether this node uses a scale of [code](1, 1, 1)[/code] or its "
 "local transformation scale."
 msgstr ""
+"Retourne si ce nœud utilise une échelle de [code](1, 1, 1)[/code] ou son "
+"échelle de transformation locale."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69671,6 +70898,20 @@ msgid ""
 "Returns whether the node notifies about its global and local transformation "
 "changes. [Spatial] will not propagate this by default."
 msgstr ""
+"Retourne si le nœud notifie ses changements de transformation globale et "
+"locale. [Spatial] ne le propage pas par défaut."
+
+#: doc/classes/Spatial.xml
+msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+"Retourne [code]true[/code] si le nœud est présent dans le [SceneTree], que "
+"sa propriété [member visible] est [code]true[/code] et que tous ses parents "
+"sont également visibles. Si un parent est caché, ce nœud ne sera pas visible "
+"dans l'arborescence de la scène."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69693,6 +70934,9 @@ msgid ""
 "itself to point toward the [code]target[/code] as per [method look_at]. "
 "Operations take place in global space."
 msgstr ""
+"Déplace le nœud vers la [code]position[/code] spécifiée, puis pivote vers la "
+"cible [code]target[/code] comme avec [method look_at]. Les opérations se "
+"déroulent dans l'espace global."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69706,12 +70950,17 @@ msgid ""
 "Rotates the local transformation around axis, a unit [Vector3], by specified "
 "angle in radians."
 msgstr ""
+"Pivote la transformation locale autour de l'axe, un [Vector3] unitaire, par "
+"angle spécifié en radians."
 
 #: doc/classes/Spatial.xml
 msgid ""
 "Rotates the local transformation around axis, a unit [Vector3], by specified "
 "angle in radians. The rotation axis is in object-local coordinate system."
 msgstr ""
+"Pivote la transformation locale autour de l'axe, un [Vector3] unitaire, par "
+"angle spécifié en radians. L'axe de rotation est dans le système de "
+"coordonnées local à l'objet."
 
 #: doc/classes/Spatial.xml
 msgid "Rotates the local transformation around the X axis by angle in radians."
@@ -69749,24 +70998,33 @@ msgid ""
 "transformation scale. Changes to the local transformation scale are "
 "preserved."
 msgstr ""
+"Définit si le nœud utilise une échelle de [code](1, 1, 1)[/code] ou son "
+"échelle de transformation locale. Les changements de l'échelle de "
+"transformation locale sont préservés."
 
 #: doc/classes/Spatial.xml
 msgid ""
 "Reset all transformations for this node (sets its [Transform] to the "
 "identity matrix)."
 msgstr ""
+"Réinitialise toutes les transformations pour ce nœud (définit sa [Transform] "
+"avec une matrice d'identité)."
 
 #: doc/classes/Spatial.xml
 msgid ""
 "Sets whether the node ignores notification that its transformation (global "
 "or local) changed."
 msgstr ""
+"Définit si le nœud ignore la notification que sa transformation (globale ou "
+"locale) a changé."
 
 #: doc/classes/Spatial.xml
 msgid ""
 "Sets whether the node notifies about its local transformation changes. "
 "[Spatial] will not propagate this by default."
 msgstr ""
+"Définit si le nœud notifie ses changements de transformation locale. "
+"[Spatial] ne le propage pas par défaut."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69774,6 +71032,9 @@ msgid ""
 "changes. [Spatial] will not propagate this by default, unless it is in the "
 "editor context and it has a valid gizmo."
 msgstr ""
+"Définit si le nœud notifie ses changements de transformation globale et "
+"locale. [Spatial] ne le propage pas par défaut, sauf dans le contexte de "
+"l'éditeur et a un manipulateur valide."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69844,6 +71105,8 @@ msgid ""
 "Global position of this node. This is equivalent to [code]global_transform."
 "origin[/code]."
 msgstr ""
+"La position globale de ce nœud. Ceci est équivalent à [code]global_transform."
+"origin[/code]."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69863,6 +71126,8 @@ msgid ""
 "Rotation part of the local transformation in degrees, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle)."
 msgstr ""
+"La partie rotation de la transformation locale, en degrés, spécifiée en "
+"termes d'angles YXZ d'Euler dans le format (angle X, angle Y puis angle Z)."
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -69995,6 +71260,9 @@ msgid ""
 "Sets the [Texture] to be used by the specified [enum TextureParam]. This "
 "function is called when setting members ending in [code]*_texture[/code]."
 msgstr ""
+"Définit la [Texture] à utiliser par le [enum TextureParam] spécifié. Cette "
+"fonction est appelée lorsque les membres se terminent par [code]*_texture[/"
+"code]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The material's base color."
@@ -70025,7 +71293,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -70048,6 +71318,8 @@ msgid ""
 "If [code]true[/code], ambient occlusion is enabled. Ambient occlusion "
 "darkens areas based on the [member ao_texture]."
 msgstr ""
+"Si [code]true[/code], l'occlusion ambiante est activée. L'occlusion ambiante "
+"assombrit les zones basées sur [member ao_texture]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70167,12 +71439,16 @@ msgstr ""
 msgid ""
 "Scales the depth offset effect. A higher number will create a larger depth."
 msgstr ""
+"Met à l'échelle l'effet de décalage de profondeur. Un nombre plus élevé "
+"créera une profondeur plus grande."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "Texture used to determine depth at a given pixel. Depth is always stored in "
 "the red channel."
 msgstr ""
+"La texture déterminant la profondeur à un pixel donné. La profondeur est "
+"toujours enregistrée dans le canal pour la couleur rouge."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Texture that specifies the color of the detail overlay."
@@ -70183,6 +71459,8 @@ msgid ""
 "Specifies how the [member detail_albedo] should blend with the current "
 "[code]ALBEDO[/code]. See [enum BlendMode] for options."
 msgstr ""
+"Spécifie comment [member detail_albedo] devrait se mélanger avec l'actuel "
+"[code]ALBEDO[/code]. Voir [enum BlendMode] pour les options."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70197,6 +71475,8 @@ msgid ""
 "Texture used to specify how the detail textures get blended with the base "
 "textures."
 msgstr ""
+"La texture utilisée pour spécifier comment les textures de détail se "
+"mélangent avec les textures de base."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70315,6 +71595,8 @@ msgid ""
 "If [code]true[/code], transparency is enabled on the body. See also [member "
 "params_blend_mode]."
 msgstr ""
+"Si [code]true[/code], la transparence est activée sur le corps. Voir aussi "
+"[member params_blend_mode]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "If [code]true[/code], the object is unaffected by lighting."
@@ -70326,6 +71608,10 @@ msgid ""
 "[b]Note:[/b] This is only effective for objects whose geometry is point-"
 "based rather than triangle-based. See also [member params_point_size]."
 msgstr ""
+"Si [code]true[/code], la taille de rendu des points peut être modifiée.\n"
+"[b]Note :[/b] Ce n'est efficace que pour les objets dont la géométrie est "
+"définie à partir de points plutôt que de triangles. Voir aussi [member "
+"params_point_size]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70400,11 +71686,11 @@ msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
 msgid "If [code]true[/code], normal mapping is enabled."
-msgstr ""
+msgstr "Si [code]true[/code], la carte normale est activée."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The strength of the normal map's effect."
-msgstr ""
+msgstr "L'intensité de l'effet de la carte normale."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70452,23 +71738,30 @@ msgid ""
 "Which side of the object is not drawn when backfaces are rendered. See [enum "
 "CullMode]."
 msgstr ""
+"Quel côté de l'objet n'est pas dessiné lorsque les faces arrière sont "
+"rendues. Voir [enum CullMode]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "Determines when depth rendering takes place. See [enum DepthDrawMode]. See "
 "also [member flags_transparent]."
 msgstr ""
+"Détermine quand le rendu de profondeur a lieu. Voir [enum DepthDrawMode]. "
+"Voir aussi [member flags_transparent]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "The algorithm used for diffuse light scattering. See [enum DiffuseMode]."
 msgstr ""
+"L'algorithme utilisé pour diffuser la lumière. Voir [enum DiffuseMode]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "If [code]true[/code], enables the vertex grow setting. See [member "
 "params_grow_amount]."
 msgstr ""
+"Si [code]true[/code], active l'inflation des sommets. Voir [member "
+"params_grow_amount]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Grows object vertices in the direction of their normals."
@@ -70491,6 +71784,8 @@ msgid ""
 "If [code]true[/code], the shader will discard all pixels that have an alpha "
 "value less than [member params_alpha_scissor_threshold]."
 msgstr ""
+"Si [code]true[/code], le shadow ignorera tous les pixels ayant une valeur "
+"d'opacité inférieure à [member params_alpha_scisor_threshold]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70498,12 +71793,18 @@ msgid ""
 "when using [constant BILLBOARD_PARTICLES]. See [member "
 "params_billboard_mode]."
 msgstr ""
+"Le nombre de trames horizontales dans la feuille de sprite de particules. "
+"Seulement activé avec [constant BILLBOARD_PARTICLES]. Voir [member "
+"params_billboard_mode]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "If [code]true[/code], particle animations are looped. Only enabled when "
 "using [constant BILLBOARD_PARTICLES]. See [member params_billboard_mode]."
 msgstr ""
+"Si [code]true[/code], les animations de particules sont en boucle. Seulement "
+"activé avec [constant BILLBOARD_PARTICLES]. Voir [member "
+"params_billboard_mode]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70511,12 +71812,17 @@ msgid ""
 "when using [constant BILLBOARD_PARTICLES]. See [member "
 "params_billboard_mode]."
 msgstr ""
+"Le nombre de trames verticales dans la feuille de sprite de particules. "
+"Seulement activé avec [constant BILLBOARD_PARTICLES]. Voir [member "
+"params_billboard_mode]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "Distance over which the fade effect takes place. The larger the distance the "
 "longer it takes for an object to fade."
 msgstr ""
+"Distance sur laquelle l'effet de disparition se produit. Plus la distance "
+"est grande, plus l'objet disparait progressivement."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70537,6 +71843,8 @@ msgid ""
 "The strength of the refraction effect. Higher values result in a more "
 "distorted appearance for the refraction."
 msgstr ""
+"L'intensité de l'effet de réfraction. Des valeurs plus élevées entraînent "
+"une apparence plus déformée pour la réfraction."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70586,6 +71894,9 @@ msgid ""
 "while a value of [code]1[/code] completely blurs the reflection. See also "
 "[member metallic]."
 msgstr ""
+"La réflexion de surface. Une valeur de [code]0[/code] représente un miroir "
+"parfait alors qu'une valeur de [code]1[/code] rend le reflet complètement "
+"flou. Voir aussi [member metallic]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70616,6 +71927,8 @@ msgid ""
 "The color used by the transmission effect. Represents the light passing "
 "through an object."
 msgstr ""
+"La couleur utilisée pour l'effet de transmission. Représente la lumière "
+"passant à travers un objet."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "If [code]true[/code], the transmission effect is enabled."
@@ -70626,6 +71939,8 @@ msgid ""
 "Texture used to control the transmission effect per-pixel. Added to [member "
 "transmission]."
 msgstr ""
+"La texture utilisée pour contrôler l'effet de transmission par pixel. Ajouté "
+"à [member transmission]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70633,12 +71948,17 @@ msgid ""
 "added to [code]UV[/code] in the vertex function. This can be used to offset "
 "a texture."
 msgstr ""
+"La quantité des coordonnées [code]UV[/code] à décaler. Cette quantité sera "
+"ajoutée à [code]UV[/code] dans la fonction \"vertex\". Cela peut être "
+"utilisé pour décaler une texture."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "How much to scale the [code]UV[/code] coordinates. This is multiplied by "
 "[code]UV[/code] in the vertex function."
 msgstr ""
+"La mise à l'échelle des coordonnées [code]UV[/code]. Ceci est multiplié par "
+"[code]UV[/code] dans la fonction \"vertex\"."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70666,12 +71986,17 @@ msgid ""
 "added to [code]UV2[/code] in the vertex function. This can be used to offset "
 "a texture."
 msgstr ""
+"La quantité des coordonnées [code]UV2[/code] à décaler. Cette quantité sera "
+"ajoutée à [code]UV2[/code] dans la fonction \"vertex\". Cela peut être "
+"utilisé pour décaler une texture."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "How much to scale the [code]UV2[/code] coordinates. This is multiplied by "
 "[code]UV2[/code] in the vertex function."
 msgstr ""
+"La mise à l'échelle des coordonnées [code]UV2[/code]. Ceci est multiplié par "
+"[code]UV2[/code] dans la fonction \"vertex\"."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70844,6 +72169,8 @@ msgid ""
 "Default blend mode. The color of the object is blended over the background "
 "based on the object's alpha value."
 msgstr ""
+"Le mode de mélange par défaut. La couleur de l'objet est mélangée sur "
+"l'arrière-plan en fonction de l'opacité de l'objet."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The color of the object is added to the background."
@@ -70866,6 +72193,8 @@ msgstr ""
 #: doc/classes/SpatialMaterial.xml
 msgid "Depth draw is calculated for both opaque and transparent objects."
 msgstr ""
+"Le dessin de la profondeur est calculé pour des objets opaques et aussi "
+"transparents."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "No depth draw."
@@ -70876,6 +72205,8 @@ msgid ""
 "For transparent objects, an opaque pass is made first with the opaque parts, "
 "then transparency is drawn."
 msgstr ""
+"Pour les objets transparents, une passe opaque est faite d'abord avec les "
+"parties opaques, puis la transparence est dessinée."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Default cull mode. The back of the object is culled when not visible."
@@ -70904,6 +72235,8 @@ msgid ""
 "Lighting is calculated per-vertex rather than per-pixel. This can be used to "
 "increase the speed of the shader at the cost of quality."
 msgstr ""
+"L'éclairage est calculé par sommet plutôt que par pixel. Cela peut être "
+"utilisé pour améliorer la vitesse du shader mais réduit la qualité visuelle."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Set [code]ALBEDO[/code] to the per-vertex color specified in the mesh."
@@ -70916,6 +72249,8 @@ msgid ""
 "Vertex color is in sRGB space and needs to be converted to linear. Only "
 "applies in the GLES3 renderer."
 msgstr ""
+"La couleur des sommets est dans l'espace sRGB et doit être convertie en "
+"linéaire. Seulement ne s'applique qu'au rendu GLES3."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70923,11 +72258,16 @@ msgid ""
 "albedo texture lookup to use [code]POINT_COORD[/code] instead of [code]UV[/"
 "code]."
 msgstr ""
+"Utilise la taille d'affichage des points pour modifier pour les primitives "
+"de points. Change également la projection des textures albedo en utilisant "
+"[code]POINT_COORD[/code] au lieu de [code]UV[/code]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "Object is scaled by depth so that it always appears the same size on screen."
 msgstr ""
+"L'objet est mise à l'échelle suivant sa profondeur pour qu'il apparaisse "
+"toujours la même taille à l'écran."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70935,6 +72275,9 @@ msgid ""
 "when billboarding. Only applies when [member params_billboard_mode] is "
 "[constant BILLBOARD_ENABLED]."
 msgstr ""
+"Le shader gardera l'échelle pour le maillage. Sinon, la mise à l'échelle "
+"sera ignoré lors de l'affichage en mode panneau. Ne s'applique que quand "
+"[member params_billboard_mode] est [constant BILLBOARD_ENABLED]."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -70978,6 +72321,8 @@ msgid ""
 "Use world coordinates in the triplanar texture lookup instead of local "
 "coordinates."
 msgstr ""
+"Utilise les coordonnées globales pour la projection de la texture "
+"triplanaire au lieu des coordonnées locales."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Forces the shader to convert albedo from sRGB space to linear space."
@@ -71007,17 +72352,18 @@ msgid "Default diffuse scattering algorithm."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
-#, fuzzy
 msgid "Diffuse scattering ignores roughness."
 msgstr "La diffusion diffuse ignore la rugosité."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Extends Lambert to cover more than 90 degrees when roughness increases."
 msgstr ""
+"Étend le calcul Lambert pour couvrir plus de 90 degrés quand la rugosité "
+"augmente."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Attempts to use roughness to emulate microsurfacing."
-msgstr ""
+msgstr "Tente d'utiliser la rugosité pour simuler le microsurfaçage."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Uses a hard cut for lighting, with smoothing affected by roughness."
@@ -71042,7 +72388,6 @@ msgid "No specular blob."
 msgstr "Pas de blob spéculaire."
 
 #: doc/classes/SpatialMaterial.xml
-#, fuzzy
 msgid "Billboard mode is disabled."
 msgstr "Le mode d'affichage est désactivé."
 
@@ -71061,6 +72406,12 @@ msgid ""
 "The [member ParticlesMaterial.anim_speed] or [member CPUParticles."
 "anim_speed] should also be set to a positive value for the animation to play."
 msgstr ""
+"Utilisé pour les systèmes de particules lorsqu'ils sont affectés aux nœuds "
+"[Particles] et [CPUParticles]. Active les propriétés [code]particles_anim_*[/"
+"code].\n"
+"[member ParticlesMaterial.anim_speed] ou [member CPUParticles.anim_speed] "
+"devrait également être défini à une valeur positive pour que l'animation "
+"soit jouée."
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Used to read from the red channel of a texture."
@@ -71095,6 +72446,8 @@ msgid ""
 "Smoothly fades the object out based on each pixel's distance from the camera "
 "using the alpha channel."
 msgstr ""
+"Fait disparaitre doucement l'objet en fonction de la distance de chaque "
+"pixel par rapport à la caméra en utilisant l'opacité."
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71145,6 +72498,10 @@ msgid ""
 "[b]Note:[/b] To get a regular hemisphere, the height and radius of the "
 "sphere must be equal."
 msgstr ""
+"Si [code]true[/code], un hémisphère (une demi-sphère) est créé plutôt qu'une "
+"sphère entière.\n"
+"[b]Note :[/b] Pour obtenir un hémisphère uniforme, la hauteur et le rayon "
+"doivent être identiques."
 
 #: doc/classes/SphereMesh.xml
 msgid "Number of radial segments on the sphere."
@@ -71167,6 +72524,9 @@ msgid ""
 "Sphere shape for 3D collisions, which can be set into a [PhysicsBody] or "
 "[Area]. This shape is useful for modeling sphere-like 3D objects."
 msgstr ""
+"Une forme sphérique pour les collisions 3D, qui peut être placée dans un "
+"[PhysicsBody] ou une [Area]. Cette forme est utile pour modéliser des objets "
+"3D sphériques."
 
 #: doc/classes/SphereShape.xml
 msgid "The sphere's radius. The shape's diameter is double the radius."
@@ -71279,18 +72639,25 @@ msgid ""
 "Container for splitting two [Control]s vertically or horizontally, with a "
 "grabber that allows adjusting the split offset or ratio."
 msgstr ""
+"Un conteneur pour diviser deux [Control] verticalement ou horizontalement, "
+"avec un séparateur pour régler le décalage ou le rapport entre ces deux "
+"contrôles."
 
 #: doc/classes/SplitContainer.xml
 msgid ""
 "Clamps the [member split_offset] value to not go outside the currently "
 "possible minimal and maximum values."
 msgstr ""
+"Limite la valeur [member split_offset] pour rester dans l'intervalle défini "
+"entre les valeurs minimale et maximale actuellement possibles."
 
 #: doc/classes/SplitContainer.xml
 msgid ""
 "If [code]true[/code], the area of the first [Control] will be collapsed and "
 "the dragger will be disabled."
 msgstr ""
+"Si [code]true[/code], le premier [Control] sera masqué et le glisseur "
+"désactivé."
 
 #: doc/classes/SplitContainer.xml
 msgid ""
@@ -71305,6 +72672,8 @@ msgid ""
 "The initial offset of the splitting between the two [Control]s, with "
 "[code]0[/code] being at the end of the first [Control]."
 msgstr ""
+"Le décalage initial de la séparation entre les deux [Control], avec [code]0[/"
+"code] étant la fin du premier [Control]."
 
 #: doc/classes/SplitContainer.xml
 msgid "Emitted when the dragger is dragged by user."
@@ -71315,7 +72684,6 @@ msgid "The split dragger is visible when the cursor hovers it."
 msgstr "Le dragueur fractionné est visible quand le curseur le survole."
 
 #: doc/classes/SplitContainer.xml
-#, fuzzy
 msgid "The split dragger is never visible."
 msgstr "Le dragueur fractionné n’est jamais visible."
 
@@ -71385,6 +72753,8 @@ msgid ""
 "Adds the [PhysicsBody] object with the given [RID] to the list of "
 "[PhysicsBody] objects excluded from the collision check."
 msgstr ""
+"Ajoute l'objet [PhysicsBody] à la liste des objets [PhysicsBody] ignorés "
+"lors de la vérification des collisions."
 
 #: doc/classes/SpringArm.xml
 msgid ""
@@ -71402,6 +72772,8 @@ msgid ""
 "Removes the given [RID] from the list of [PhysicsBody] objects excluded from "
 "the collision check."
 msgstr ""
+"Supprime le [RID] de la liste des objets [PhysicsBody] ignorés de la "
+"vérification des collisions."
 
 #: doc/classes/SpringArm.xml
 msgid ""
@@ -71410,6 +72782,10 @@ msgid ""
 "and-masks]Collision layers and masks[/url] in the documentation for more "
 "information."
 msgstr ""
+"Les calques selon lesquels le contrôle des collisions doit être effectué. "
+"Voir [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-"
+"layers-and-masks]Calques et masques de collision[/url] dans la documentation "
+"pour plus d'informations."
 
 #: doc/classes/SpringArm.xml
 msgid ""
@@ -71429,6 +72805,9 @@ msgid ""
 "When the shape is set, the SpringArm will cast the [Shape] on its z axis "
 "instead of performing a ray cast."
 msgstr ""
+"La [Shape] à utiliser pour le SpringArm.\n"
+"Lorsque la forme est définie, le SpringArm lancera le [Shape] sur son axe Z "
+"au lieu d'exécuter un lancer de rayon."
 
 #: doc/classes/SpringArm.xml
 msgid ""
@@ -71438,6 +72817,11 @@ msgid ""
 "To know more about how to perform a shape cast or a ray cast, please consult "
 "the [PhysicsDirectSpaceState] documentation."
 msgstr ""
+"L'étendue maximale du SpringArm. Il s'agit d'une longueur tant pour le rayon "
+"que pour la forme utilisée à l'intérieur pour calculer la position souhaitée "
+"pour les nœuds enfants du SpringArm.\n"
+"Pour en savoir plus sur la façon d'effectuer un lancer de forme ou de rayon, "
+"veuillez consulter la documentation de [PhysicsDirectSpaceState]."
 
 #: doc/classes/Sprite.xml
 msgid "General-purpose sprite node."
@@ -71448,6 +72832,9 @@ msgid ""
 "A node that displays a 2D texture. The texture displayed can be a region "
 "from a larger atlas texture, or a frame from a sprite sheet animation."
 msgstr ""
+"Un nœud qui affiche une texture 2D. La texture affichée peut être une région "
+"à partir d'une texture plus grande de l'atlas, ou d'une trame d'une "
+"animation de feuille de sprite."
 
 #: doc/classes/Sprite.xml
 msgid ""
@@ -71461,6 +72848,16 @@ msgid ""
 "            print(\"A click!\")\n"
 "[/codeblock]"
 msgstr ""
+"Retourne un [Rect2] représentant la taille englobante du Sprite dans les "
+"coordonnées locales. Peut être utilisé pour détecter si le Sprite a été "
+"cliqué. Par exemple :\n"
+"[codeblock]\n"
+"func _input(event):\n"
+"    if event is InputEventMouseButton and event.pressed and event."
+"button_index == BUTTON_LEFT:\n"
+"        if get_rect().has_point(to_local(event.position)):\n"
+"            print(\"Un clic !\")\n"
+"[/codeblock]"
 
 #: doc/classes/Sprite.xml
 msgid ""
@@ -71469,6 +72866,10 @@ msgid ""
 "[b]Note:[/b] It also returns [code]false[/code], if the sprite's texture is "
 "[code]null[/code] or if the given position is invalid."
 msgstr ""
+"Retourne [code]true[/code], si le pixel à la position donnée est opaque, ou "
+"[code]false[/code] sinon.\n"
+"[b]Note :[/b] Retourne également [code]false[/code] si la texture du sprite "
+"est [code]null[/code] ou si la position donnée est invalide."
 
 #: doc/classes/Sprite.xml
 msgid "If [code]true[/code], texture is centered."
@@ -71479,6 +72880,8 @@ msgid ""
 "Current frame to display from sprite sheet. [member hframes] or [member "
 "vframes] must be greater than 1."
 msgstr ""
+"La trame actuelle à afficher dans la feuille de sprite. [membres hframes] ou "
+"[membres vframes] doivent être supérieurs à 1."
 
 #: doc/classes/Sprite.xml doc/classes/Sprite3D.xml
 msgid ""
@@ -71486,6 +72889,9 @@ msgid ""
 "for the [member frame] property. [member hframes] or [member vframes] must "
 "be greater than 1."
 msgstr ""
+"Les coordonnées de la trame à afficher de la feuille de sprite. Il s'agit "
+"d'un raccourci de la propriété [member frame]. [membres hframes] ou [membres "
+"vframes] doivent être supérieurs à 1."
 
 #: doc/classes/Sprite.xml doc/classes/Sprite3D.xml
 msgid "The number of columns in the sprite sheet."
@@ -71546,6 +72952,9 @@ msgid ""
 "can be a region from a larger atlas texture, or a frame from a sprite sheet "
 "animation."
 msgstr ""
+"Un nœud qui affiche une texture 2D dans un environnement 3D. La texture "
+"affichée peut être une région à partir d'une texture plus grande de l'atlas, "
+"ou d'une trame d'une animation de feuille de sprite."
 
 #: doc/classes/Sprite3D.xml
 msgid ""
@@ -71556,10 +72965,13 @@ msgstr ""
 "atlas. Voir [member region_rect]."
 
 #: doc/classes/Sprite3D.xml
+#, fuzzy
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
+"La [Texture] à dessiner. Si [member GeometryInstance.material_override] est "
+"utilisé, cette dernière sera utilisée."
 
 #: doc/classes/SpriteBase3D.xml
 msgid "2D sprite node in 3D environment."
@@ -71587,6 +72999,8 @@ msgid ""
 "If [code]true[/code], texture can be seen from the back as well, if "
 "[code]false[/code], it is invisible when looking at it from behind."
 msgstr ""
+"Si [code]true[/code], la texture est aussi affichée de dos, si [code]false[/"
+"code], elle est invisible de dos."
 
 #: doc/classes/SpriteBase3D.xml
 msgid ""
@@ -71632,8 +73046,8 @@ msgid ""
 msgstr ""
 "Définit la priorité de rendu pour le texte. Les objets plus prioritaires "
 "seront affichés par-dessus les objets les moins prioritaites.\n"
-"[b]Note :[/b] Cela ne s'applique que si [member alpha_cut] est défini à ["
-"constant ALPHA_CUT_DISABLED] (c'est la valeur par défaut).\n"
+"[b]Note :[/b] Cela ne s'applique que si [member alpha_cut] est défini à "
+"[constant ALPHA_CUT_DISABLED] (c'est la valeur par défaut).\n"
 "[b]Note :[/b] Cela ne s'applique qu'au tri des objets transparents. Cela "
 "n'affectera pas la façon dont les objets transparents sont triés par rapport "
 "aux objets opaques. C'est parce que les objets opaques ne sont pas triés, "
@@ -71645,33 +73059,43 @@ msgid ""
 "If [code]true[/code], the [Light] in the [Environment] has effects on the "
 "sprite."
 msgstr ""
+"Si [code]true[/code], une [Light] dans le [Environment] a des effets sur le "
+"sprite."
 
 #: doc/classes/SpriteBase3D.xml
 msgid ""
 "If [code]true[/code], the texture's transparency and the opacity are used to "
 "make those parts of the sprite invisible."
 msgstr ""
+"Si [code]true[/code], la transparence et l'opacité des textures sont "
+"utilisées pour rendre invisibles ces parties du sprite."
 
 #: doc/classes/SpriteBase3D.xml
 msgid ""
 "If set, the texture's transparency and the opacity are used to make those "
 "parts of the sprite invisible."
 msgstr ""
+"Si elle est définie, la transparence de la texture et l'opacité sont "
+"utilisées pour rendre invisibles ces parties du sprite."
 
 #: doc/classes/SpriteBase3D.xml
 msgid "If set, lights in the environment affect the sprite."
-msgstr ""
+msgstr "Si définies, les lumières dans l'environnement affecte le sprite."
 
 #: doc/classes/SpriteBase3D.xml
 msgid ""
 "If set, texture can be seen from the back as well, if not, it is invisible "
 "when looking at it from behind."
 msgstr ""
+"Si défini, la texture est aussi visible de derrière, sinon, elle est "
+"invisible quand on la regarde de derrière."
 
 #: doc/classes/SpriteBase3D.xml
 msgid ""
 "Sprite is scaled by depth so that it always appears the same size on screen."
 msgstr ""
+"Sprite est mise à l'échelle suivant sa profondeur pour qu'elle apparaisse "
+"toujours avec la même taille à l'écran."
 
 #: doc/classes/SpriteFrames.xml
 msgid "Sprite frame library for AnimatedSprite and AnimatedSprite3D."
@@ -71708,6 +73132,8 @@ msgid ""
 "Returns [code]true[/code] if the given animation is configured to loop when "
 "it finishes playing. Otherwise, returns [code]false[/code]."
 msgstr ""
+"Retourne [code]true[/code] si l'animation donnée est configurée pour boucler "
+"lorsqu'elle termine de jouer. Sinon, retourne [code]false[/code]."
 
 #: doc/classes/SpriteFrames.xml
 msgid ""
@@ -71785,12 +73211,16 @@ msgid ""
 "The body's constant angular velocity. This does not rotate the body, but "
 "affects other bodies that touch it, as if it was in a state of rotation."
 msgstr ""
+"La vitesse angulaire constante du corps. Cela ne tourne pas le corps, mais "
+"affecte les autres corps qui le touchent, comme s'il pivotait."
 
 #: doc/classes/StaticBody.xml
 msgid ""
 "The body's constant linear velocity. This does not move the body, but "
 "affects other bodies that touch it, as if it was in a state of movement."
 msgstr ""
+"La vitesse linéaire constante du corps. Cela ne déplace pas le corps, mais "
+"affecte les autres corps qui le touchent, comme s'il se déplaçait."
 
 #: doc/classes/StaticBody.xml
 msgid ""
@@ -71827,12 +73257,16 @@ msgid ""
 "The body's constant angular velocity. This does not rotate the body, but "
 "affects colliding bodies, as if it were rotating."
 msgstr ""
+"La vitesse angulaire constante du corps. Cela ne tourne pas le corps, mais "
+"affecte les autres corps qui le touchent, comme s'il pivotait."
 
 #: doc/classes/StaticBody2D.xml
 msgid ""
 "The body's constant linear velocity. This does not move the body, but "
 "affects colliding bodies, as if it were moving."
 msgstr ""
+"La vitesse linéaire constante du corps. Cela ne déplace pas le corps, mais "
+"affecte les autres corps qui le touchent, comme s'il se déplaçait."
 
 #: doc/classes/StaticBody2D.xml
 msgid ""
@@ -71841,6 +73275,10 @@ msgid ""
 "Deprecated, use [member PhysicsMaterial.friction] instead via [member "
 "physics_material_override]."
 msgstr ""
+"Le frottement du corps. Les valeurs vont de [code]0[/code] (pas de friction) "
+"à [code]1[/code] (friction complète).\n"
+"Obsolète, utilisez plutôt [member PhysicsMaterial.friction] avec [member "
+"physics_material_override]."
 
 #: doc/classes/StreamPeer.xml
 msgid "Abstraction and base class for stream-based protocols."
@@ -71852,6 +73290,9 @@ msgid ""
 "as TCP). It provides an API for sending and receiving data through streams "
 "as raw data or strings."
 msgstr ""
+"StreamPeer est une classe abstraite de base pour les protocoles à base de "
+"flux (comme TCP). Elle fournit une API pour l'envoi et la réception de "
+"données par les flux sous forme de données brutes ou textuelles."
 
 #: doc/classes/StreamPeer.xml
 msgid "Gets a signed 16-bit value from the stream."
@@ -71881,6 +73322,11 @@ msgid ""
 "received. This function returns two values, an [enum @GlobalScope.Error] "
 "code and a data array."
 msgstr ""
+"Retourne les morceaux de données avec les octets reçus. Le nombre d'octets à "
+"recevoir peut être spécifié dans l'argument [code]bytes[/code]. Si pas assez "
+"d'octets sont disponibles, la fonction bloquera jusqu'à ce que la quantité "
+"demandée soit reçu. Cette fonction retourne deux valeurs : un code [enum "
+"@GlobalScope.Error] et un tableau de données."
 
 #: doc/classes/StreamPeer.xml
 msgid "Gets a double-precision float from the stream."
@@ -71898,6 +73344,11 @@ msgid ""
 "function returns two values, an [enum @GlobalScope.Error] code, and a data "
 "array."
 msgstr ""
+"Retourne les morceaux de données avec les octets. Le nombre d'octets à "
+"recevoir peut être spécifié dans l'argument [code]byts[/code]. Si pas assez "
+"d'octets sont disponibles, la fonction retournera combien ont effectivement "
+"été reçus. Cette fonction retourne deux valeurs : un code [enum @GlobalScope."
+"Error] et un tableau de données."
 
 #: doc/classes/StreamPeer.xml
 msgid ""
@@ -71905,6 +73356,9 @@ msgid ""
 "[code]bytes[/code] is negative (default) the length will be read from the "
 "stream using the reverse process of [method put_string]."
 msgstr ""
+"Retourne une chaîne ASCII de longeur [code]octets[/code] du flux. Si "
+"[code]bytes[/code] est négatif (par défaut) la longueur sera lue depuis le "
+"flux en utilisant le processus inverse de [method put_string]."
 
 #: doc/classes/StreamPeer.xml
 msgid "Gets an unsigned 16-bit value from the stream."
@@ -71929,6 +73383,10 @@ msgid ""
 "(default) the length will be read from the stream using the reverse process "
 "of [method put_utf8_string]."
 msgstr ""
+"Retourne une chaîne UTF-8 de longueur [code]bytes[/code] du flux (ceci "
+"décode la chaîne envoyée en UTF-8). Si [code]bytes[/code] est négatif (par "
+"défaut) la longueur sera lue depuis le flux en utilisant le processus "
+"inverse de [method put_utf8_string]."
 
 #: doc/classes/StreamPeer.xml
 msgid ""
@@ -71938,6 +73396,12 @@ msgid ""
 "Do not use this option if the serialized object comes from untrusted sources "
 "to avoid potential security threats such as remote code execution."
 msgstr ""
+"Retourne un Variant du flux. Si [code]allow_objects[/code] est [code]true[/"
+"code], le décodage des objets sera autorisé.\n"
+"[b]Avertissement :[/b] Les objets désérialisés peuvent contenir du code qui "
+"sera exécuté. N'utilisez pas cette option si l'objet sérialisé provient de "
+"sources non sûres pour éviter des risques de sécurité telles que l'exécution "
+"de code à distance."
 
 #: doc/classes/StreamPeer.xml
 msgid "Puts a signed 16-bit value into the stream."
@@ -71961,6 +73425,9 @@ msgid ""
 "the data is done sending. This function returns an [enum @GlobalScope.Error] "
 "code."
 msgstr ""
+"Envoie un morceau de données à travers la connexion, en blocant si "
+"nécessaire jusqu'à ce que les données soient envoyées. Cette fonction "
+"retourne un code [enum @GlobalScope.Error]."
 
 #: doc/classes/StreamPeer.xml
 msgid "Puts a double-precision float into the stream."
@@ -71977,6 +73444,10 @@ msgid ""
 "[enum @GlobalScope.Error] code and an integer, describing how much data was "
 "actually sent."
 msgstr ""
+"Envoie un morceau de données par la connexion. Si toutes les données ne "
+"peuvent pas être envoyées à la fois, seule une partie de celle-ci le sera. "
+"Cette fonction retourne deux valeurs : un code [enum @GlobalScope.Error], et "
+"un entier décrivant la quantité de données effectivement envoyées."
 
 #: doc/classes/StreamPeer.xml
 msgid ""
@@ -71988,6 +73459,13 @@ msgid ""
 "put_data(\"Hello world\".to_ascii())\n"
 "[/codeblock]"
 msgstr ""
+"Ajoute une chaîne ASCII (se terminant par le caractère nul) dans le flux "
+"précédée par un entier de 32 bits représentant sa taille.\n"
+"[b]Note :[/b] Pour mettre une chaîne ASCII sans la faire précéder par sa "
+"taille, vous pouvez utiliser [method put_data] :\n"
+"[codeblock]\n"
+"put_data(\"Salut le monde\".to_ascii())\n"
+"[/codeblock]"
 
 #: doc/classes/StreamPeer.xml
 msgid "Puts an unsigned 16-bit value into the stream."
@@ -72015,18 +73493,30 @@ msgid ""
 "put_data(\"Hello world\".to_utf8())\n"
 "[/codeblock]"
 msgstr ""
+"Ajoute une chaîne UTF-8 (se terminant par le caractère nul) dans le flux "
+"précédée par un entier non signé de 32 bits représentant sa taille.\n"
+"[b]Note :[/b] Pour mettre une chaîne UTF-8 sans la faire précéder par sa "
+"taille, vous pouvez utiliser [method put_data] :\n"
+"[codeblock]\n"
+"put_data(\"Salut le monde\".to_utf8())\n"
+"[/codeblock]"
 
 #: doc/classes/StreamPeer.xml
 msgid ""
 "Puts a Variant into the stream. If [code]full_objects[/code] is [code]true[/"
 "code] encoding objects is allowed (and can potentially include code)."
 msgstr ""
+"Ajoute un Variant dans le flux. Si [code]full_objects[/code] est [code]true[/"
+"code], le codage des objects est autorisé (ceux-ci peuvent potentiellement "
+"contenir du code)."
 
 #: doc/classes/StreamPeer.xml
 msgid ""
 "If [code]true[/code], this [StreamPeer] will using big-endian format for "
 "encoding and decoding."
 msgstr ""
+"Si [code]true[/code], ce [StreamPeer] utilisera le format big-endian pour "
+"l'encodage et le décodage."
 
 #: doc/classes/StreamPeerBuffer.xml
 msgid "Data buffer stream peer."
@@ -72050,6 +73540,8 @@ msgstr "Efface le [member data_array] et rétablit le curseur."
 msgid ""
 "Returns a new [StreamPeerBuffer] with the same [member data_array] content."
 msgstr ""
+"Retourne un nouveau [StreamPeerBuffer] avec le même contenu de [member "
+"data_array]."
 
 #: doc/classes/StreamPeerBuffer.xml
 msgid "Returns the current cursor position."
@@ -72069,10 +73561,14 @@ msgid ""
 "Moves the cursor to the specified position. [code]position[/code] must be a "
 "valid index of [member data_array]."
 msgstr ""
+"Déplace le curseur vers la position spécifiée. [code]position[/code] doit "
+"être un index valide de [member data_array]."
 
 #: doc/classes/StreamPeerBuffer.xml
 msgid "The underlying data buffer. Setting this value resets the cursor."
 msgstr ""
+"La mémoire tampon interne. Changer cette valeur réinitialise la position du "
+"curseur."
 
 #: doc/classes/StreamPeerSSL.xml
 msgid "SSL stream peer."
@@ -72083,6 +73579,8 @@ msgid ""
 "SSL stream peer. This object can be used to connect to an SSL server or "
 "accept a single SSL client connection."
 msgstr ""
+"Un pair d'un flux SSL. Cet objet peut être utilisé pour se connecter à un "
+"serveur SSL ou accepter une seule connexion avec un client SSL."
 
 #: doc/classes/StreamPeerSSL.xml
 msgid ""
@@ -72091,6 +73589,10 @@ msgid ""
 "can pass the optional [code]chain[/code] parameter to provide additional CA "
 "chain information along with the certificate."
 msgstr ""
+"Accepte une connexion par les pairs en tant que serveur en utilisant la "
+"[code]private_key[/code] et en fournissant le [code]certificate[/code] donné "
+"au client. Vous pouvez passer le paramètre optionnel [code]chain[/code] pour "
+"fournir des informations supplémentaires sur la chaîne CA avec le certificat."
 
 #: doc/classes/StreamPeerSSL.xml
 msgid ""
@@ -72101,6 +73603,13 @@ msgid ""
 "[b]Note:[/b] Specifying a custom [code]valid_certificate[/code] is not "
 "supported in HTML5 exports due to browsers restrictions."
 msgstr ""
+"Se connecte à un pair en utilisant le [code]stream[/code] interne d'un "
+"[StreamPeer]. Si [code]validate_certs[/code] est [code]true[/code], "
+"[StreamPeerSSL] validera le certificat du pair pour s'assurer qu'il "
+"correspond au [code]for_hostname[/code].\n"
+"[b]Note :[/b] Spécifier un code personnalisé pour [code]valid_certificate[/"
+"code] n'est pas pris en charge dans les exportations HTML5 en raison des "
+"restrictions des navigateurs."
 
 #: doc/classes/StreamPeerSSL.xml doc/classes/StreamPeerTCP.xml
 msgid "Disconnects from host."
@@ -72111,6 +73620,9 @@ msgid ""
 "Poll the connection to check for incoming bytes. Call this right before "
 "[method StreamPeer.get_available_bytes] for it to work properly."
 msgstr ""
+"Sonde la connexion pour vérifier les octets entrants. Appelez ceci avant "
+"[method StreamPeer.get_available_bytes] pour que ça puisse fonctionner "
+"correctement."
 
 #: doc/classes/StreamPeerSSL.xml
 msgid "A status representing a [StreamPeerSSL] that is disconnected."
@@ -72133,6 +73645,8 @@ msgid ""
 "An error status that shows a mismatch in the SSL certificate domain "
 "presented by the host and the domain requested for validation."
 msgstr ""
+"Un statut d'erreur qui montre une erreur dans le domaine de certificat SSL "
+"présenté par l'hôte et le domaine demandé pour validation."
 
 #: doc/classes/StreamPeerTCP.xml
 msgid "TCP stream peer."
@@ -72143,6 +73657,8 @@ msgid ""
 "TCP stream peer. This object can be used to connect to TCP servers, or also "
 "is returned by a TCP server."
 msgstr ""
+"Pair de flux TCP. Cet objet peut être utilisé pour se connecter aux serveurs "
+"TCP, ou est également retourné par un serveur TCP."
 
 #: doc/classes/StreamPeerTCP.xml
 msgid ""
@@ -72150,6 +73666,9 @@ msgid ""
 "resolved if valid. Returns [constant OK] on success or [constant FAILED] on "
 "failure."
 msgstr ""
+"Se connecte au pair [code]host:port[/code] spécifié. Un nom d'hôte sera "
+"résolu si valide. Retourne [constant OK] en cas de succès ou [constant "
+"FAILED] en cas l'échec."
 
 #: doc/classes/StreamPeerTCP.xml
 msgid "Returns the IP of this peer."
@@ -72229,6 +73748,11 @@ msgid ""
 "Strings are reference-counted and use a copy-on-write approach, so passing "
 "them around is cheap in resources."
 msgstr ""
+"C'est la classe de chaîne intégrée (et celle utilisée par GDScript). Il "
+"prend en charge l'Unicode et fournit tous les moyens nécessaires pour la "
+"manipulation des chaînes. Les chaînes sont comptées par référence et "
+"utilisent une approche de copie à l'écriture, donc les passer en argument ne "
+"demande que très peu de ressources."
 
 #: doc/classes/String.xml
 msgid "Constructs a new String from the given [bool]."
@@ -72387,6 +73911,13 @@ msgid ""
 "[b]Note:[/b] Unlike the GDScript parser, this method doesn't support the "
 "[code]\\uXXXX[/code] escape sequence."
 msgstr ""
+"Retourne une copie de la chaîne avec des caractères échappés remplacés par "
+"leurs significations. Les caracètres échappés supportés sont : [code]\\'[/"
+"code], [code]\\\"[/code], [code]\\?[/code], [code]\\\\[/code], [code]\\a[/"
+"code], [code]\\b[/code], [code]\\f[/code], [code]\\n[/code], [code]\\r[/"
+"code], [code]\\t[/code] et [code]\\v[/code].\n"
+"[b]Note :[/b] Contrairement au parseur GDScript, cette méthode ne supporte "
+"pas la séquence d'échappement de caractères Unicode [code]\\uXXXX[/code]."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72397,6 +73928,12 @@ msgid ""
 "code], it will return [code]Capitalize Camel Case Mixed With Underscores[/"
 "code]."
 msgstr ""
+"Change la casse de certaines lettres. Remplace les underscores avec des "
+"espaces, ajoute des espaces avant les caractères majuscules en mots, "
+"convertit toutes les lettres en minuscule, puis met en majuscule la première "
+"lettre et chaque lettre suivant un caractère d'espace. Pour [code]unTexte en "
+"majuscule avec_des_underscores[/code], cela retournera [code]Un Texte En "
+"Majuscule Avec des Underscores[/code]."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72424,6 +73961,10 @@ msgid ""
 "[code]to[/code] equals 0 the whole string will be used. If only [code]to[/"
 "code] equals 0 the remained substring will be used."
 msgstr ""
+"Retourne le nombre d'occurrences de la sous-chaîne [code]what[/code] entre "
+"les positions [code]from[/code] et [code]to[/code]. Si [code]from[/code] et "
+"[code]to[/code] sont égales à 0, la chaîne entière sera utilisée. Si "
+"seulement [code]to[/code] est à 0, la sous-chaîne restante sera utilisée."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72432,6 +73973,11 @@ msgid ""
 "[code]from[/code] and [code]to[/code] equals 0 the whole string will be "
 "used. If only [code]to[/code] equals 0 the remained substring will be used."
 msgstr ""
+"Retourne le nombre d'occurrences de la sous-chaîne [code]what[/code] (en "
+"ignorant la casse) entre les positions [code]from[/code] et [code]to[/code]. "
+"Si [code]from[/code] et [code]to[/code] sont égales à 0, la chaîne entière "
+"sera utilisée. Si seulement [code]to[/code] est à 0, la sous-chaîne restante "
+"sera utilisée."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72537,6 +74083,33 @@ msgid ""
 "\"Godot\"]]))\n"
 "[/codeblock]"
 msgstr ""
+"Formate la chaîne en remplaçant toutes les occurrences de [code]placeholder[/"
+"code] par les éléments de [code]values[/code].\n"
+"[code]values[/code] peut être un [Dictionary] ou un [Array]. Toute occurence "
+"de [code]placeholder[/code] sera remplacée par les clés correspondantes à "
+"l'avance. Les éléments Array utilisent leur index comme clés.\n"
+"[codeblock]\n"
+"# Affiche : 'En attendant Godot' est une pièce de Samuel Beckett, et le "
+"moteur Godot est nommé d'après elle.\n"
+"var use_array_values = \"'En attendant {0}' est une pièce de {1}, et le "
+"moteur {0} est nommé d'après elle.\"\n"
+"print(use_array_values.format([\"Godot\", \"Samuel Beckett\"]))\n"
+"\n"
+"# Affiche : L'utilisateur 42 est Godot.\n"
+"print(\"L'utilisateur {id} est {name}.\".format({\"id\": 42, \"name\": "
+"\"Godot\"}))\n"
+"[/codeblock]\n"
+"Une manipulation supplémentaire est effectuée quand [code]values[/code] est "
+"un tableau. Si [code]placeholder[/code] ne contient pas de underscore "
+"(\"_\"), les éléments du tableau seront utilisés pour remplacer "
+"l'occurrence ; Si un élément de tableau est un autre tableau de 2 éléments, "
+"il sera interprété comme une paire de clé et valeur.\n"
+"[codeblock]\n"
+"# Affiche : L'utilisateur 42 est Godot.\n"
+"print(\"L'utilisateur {} est {}.\".format([42, \"Godot\"], \"{}\"))\n"
+"print(\"L'utilisateur {id} est {name}.\".format([[\"id\", 42], [\"name\", "
+"\"Godot\"]]))\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid "If the string is a valid file path, returns the base directory name."
@@ -72600,6 +74173,15 @@ msgid ""
 "print(\"i/am/example/string\".get_slice(\"/\", 2)) # Prints 'example'.\n"
 "[/codeblock]"
 msgstr ""
+"Divise une chaîne en utilisant un [code]delimiter[/code] et retourne une "
+"sous-chaîne à l'index [code]slice[/code]. Retourne une chaîne vide si "
+"l'index n'existe pas.\n"
+"Il s'agit d'une alternative plus performante à [method split] pour les cas "
+"où vous avez besoin d'un seul élément du tableau à un index fixe.\n"
+"Exemple :\n"
+"[codeblock]\n"
+"print(\"je/suis/un/exemple\".get_slice(\"/\", 3)) # Affiche 'exemple'.\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -72609,6 +74191,13 @@ msgid ""
 "does [i]not[/i] imply the strings are equal, because different strings can "
 "have identical hash values due to hash collisions."
 msgstr ""
+"Retourne la valeur de hachage de 32 bits représentant le contenu de la "
+"chaîne.\n"
+"[b]Note :[/b] Les [String] avec un contenu identique produiront toujours des "
+"valeurs de hachage identiques. Cependant, l'inverse n'est pas vrai. Des "
+"valeurs de hachage identiques n'implique [i]pas[/i] que les chaînes le "
+"soient aussi, car différentes chaînes peuvent avoir des valeurs de hachage "
+"identiques en raison de collisions de hachage."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72651,6 +74240,12 @@ msgid ""
 "http_unescape())\n"
 "[/codeblock]"
 msgstr ""
+"Échappe (décode) une chaine dans le format encodé pour les URL. Également "
+"dénommé \"URL decode\".\n"
+"[codeblock]\n"
+"print(\"https://example.org/?escaped=\" + \"Godot%20Engine%3A%27docs%27\"."
+"http_unescape())\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -72664,6 +74259,16 @@ msgid ""
 "print(size) # prints \"127.5 MiB\"\n"
 "[/codeblock]"
 msgstr ""
+"Convertit [code]size[/code] qui représente un taille en octets dans un "
+"format lisible en utilisant un ensemble internationalisé d'unités de taille "
+"de données, comme : o, Kio, Mio, Gio, Tio, Pio, Eio. Notez que l'unité "
+"proche la plus petite est choisie automatiquement pour s'adapter aux "
+"multiples de 1024.\n"
+"[codeblock]\n"
+"var bytes = 133790307\n"
+"var size = String.humanize_size(bytes)\n"
+"print(size) # Affiche \"127.5 Mio\"\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -72674,6 +74279,14 @@ msgid ""
 "e.g. [code]\"# \"[/code]. See also [method dedent] to remove indentation.\n"
 "[b]Note:[/b] Empty lines are kept empty."
 msgstr ""
+"Retourne une copie de la chaîne avec des lignes identées avec [code]prefix[/"
+"code].\n"
+"Par exemple, la chaîne peut être identée avec deux tabulations en utilisant "
+"[code]\"\\t\\t\"[/code], ou quatre espaces en utilisant [code]\"    \"[/"
+"code]. Le préfixe peut être n'importe quelle chaîne de sorte qu'il peut "
+"également être utilisé pour commenter les chaînes avec par exemple [code]\"# "
+"\"[/code]. Voir aussi [method dedent] pour supprimer l'indentation.\n"
+"[b]Note :[/b] Les lignes vides sont gardées vides."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72688,18 +74301,24 @@ msgid ""
 "If the string is a path to a file or directory, returns [code]true[/code] if "
 "the path is absolute."
 msgstr ""
+"Si la chaîne est un chemin vers un fichier ou un dossier, retourne "
+"[code]true[/code] si le chemin est absolu."
 
 #: doc/classes/String.xml
 msgid ""
 "If the string is a path to a file or directory, returns [code]true[/code] if "
 "the path is relative."
 msgstr ""
+"Si la chaîne est un chemin vers un fichier ou un dossier, retourne "
+"[code]true[/code] si le chemin est relatif."
 
 #: doc/classes/String.xml
 msgid ""
 "Returns [code]true[/code] if this string is a subsequence of the given "
 "string."
 msgstr ""
+"Retourne [code]true[/code] si cette chaîne est une sous-séquence de la "
+"chaîne donnée."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72715,6 +74334,9 @@ msgid ""
 "allowed in file names, those being:\n"
 "[code]: / \\ ? * \" | % < >[/code]"
 msgstr ""
+"Retourne [code]true[/code] si cette chaîne est libre des caractères qui ne "
+"sont pas autorisés dans les noms de fichiers, ceux-ci étant :\n"
+"[code]: / \\ ? * \" | % < >[/code]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -72727,6 +74349,14 @@ msgid ""
 "print(\"Hello\".is_valid_float()) # Prints \"False\"\n"
 "[/codeblock]"
 msgstr ""
+"Retourne [code]true[/code] si cette chaîne contient un flottant valide. Ceci "
+"inclut les entiers, et supporte aussi les exposants :\n"
+"[codeblock]\n"
+"print(\"1.7\".is_valid_float()) # Affiche \"True\"\n"
+"print(\"24\".is_valid_float()) # Affiche \"True\"\n"
+"print(\"7e3\".is_valid_float()) # Affiche \"True\"\n"
+"print(\"Hello\".is_valid_float()) # Affiche \"False\"\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -72735,6 +74365,10 @@ msgid ""
 "the hexadecimal number is determined by [code]0x[/code] prefix, for "
 "instance: [code]0xDEADC0DE[/code]."
 msgstr ""
+"Retourne [code]true[/code] si cette chaîne contient un numéro hexadécimal "
+"valide. Si [code]with_prefix[/code] est [code]true[/code], alors le nombre "
+"hexadécimal doit commencer par [code]0x[/code] pour être valide, comme par "
+"exemple : [code]0xDEADC0DE[/code]."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72743,6 +74377,11 @@ msgid ""
 "[code]hsl()[/code] colors aren't considered valid by this method and will "
 "return [code]false[/code]."
 msgstr ""
+"Retourne [code]true[/code] si cette chaîne contient une couleur valide dans "
+"la notation HTML hexadécimale. D'autres notations HTML telles que les "
+"couleurs nommées ou l'utilisation de [code]hsl()[/code] ne sont pas "
+"considérées comme valides par cette méthode et retourneront toujours "
+"[code]false[/code]."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72755,6 +74394,15 @@ msgid ""
 "print(\"bad_ident_#2\".is_valid_identifier()) # Prints \"False\"\n"
 "[/codeblock]"
 msgstr ""
+"Retourne [code]true[/code] si cette chaîne est un identifiant valide. Un "
+"identifiant valide ne peut contenir que des lettres, des chiffres et des "
+"underlines ([code]_[/code]) et le premier caractère ne peut pas être un "
+"chiffre. Ça représente un nom valide d'une variable ou d'une méthode.\n"
+"[codeblock]\n"
+"print(\"good_ident_1\".is_valid_identifier()) # Affiche \"True\"\n"
+"print(\"1st_bad_ident\".is_valid_identifier()) # Affiche \"False\"\n"
+"print(\"bad_ident_#2\".is_valid_identifier()) # Affiche \"False\"\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -72767,6 +74415,14 @@ msgid ""
 "print(\"-12\".is_valid_integer()) # Prints \"True\"\n"
 "[/codeblock]"
 msgstr ""
+"Retourne [code]true[/code] si cette chaîne contient un entier valide.\n"
+"[codeblock]\n"
+"print(\"7\".is_valid_integer()) # Affiche \"True\"\n"
+"print(\"14.6\".is_valid_integer()) # Affiche \"False\"\n"
+"print(\"L\".is_valid_integer()) # Affiche \"False\"\n"
+"print(\"+3\".is_valid_integer()) # Affiche \"True\"\n"
+"print(\"-12\".is_valid_integer()) # Affiche \"True\"\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -72775,6 +74431,10 @@ msgid ""
 "Reserved_IP_addresses]reserved IP addresses[/url] such as [code]0.0.0.0[/"
 "code] as valid."
 msgstr ""
+"Retourne [code]true[/code] si cette chaîne contient seulement une adresse "
+"IPv4 ou IPv6 correctement formée. Cette méthode considère [url=https://en."
+"wikipedia.org/wiki/Reserved_IP_addresses]les adresses IP réservées[/url] "
+"comme [code]0.0.0.0[/code] comme étant valides."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72785,6 +74445,14 @@ msgid ""
 "print(\", \".join([\"One\", \"Two\", \"Three\", \"Four\"]))\n"
 "[/codeblock]"
 msgstr ""
+"Retourner une [String] qui est la concaténation des éléments [code]parts[/"
+"code]. Le séparateur entre les éléments est la chaîne qui appelle cette "
+"méthode.\n"
+"Exemple :\n"
+"[codeblock]\n"
+"print(\", \".join([\"Un\", \"deux\", \"trois\", \"quatre.\"])) # Affiche "
+"\"Un, deux, trois, quatre.\"\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -72819,6 +74487,11 @@ msgid ""
 "single character except a period ([code]\".\"[/code]). An empty string or "
 "empty expression always evaluates to [code]false[/code]."
 msgstr ""
+"Fait une correspondance simple de l'expression sensible à la casse, où "
+"[code]\"*\"[/code] correspond aucun, un seul ou plusieurs caractères "
+"arbitraires, et [code]\"?\"[/code] correspond à un seule caracètre sauf un "
+"point ([code]\".\"[/code]). Une chaîne ou expression vide est toujours "
+"évaluée [code]false[/code]."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72827,10 +74500,15 @@ msgid ""
 "single character except a period ([code]\".\"[/code]). An empty string or "
 "empty expression always evaluates to [code]false[/code]."
 msgstr ""
+"Fait une correspondance simple de l'expression insensible à la casse, où "
+"[code]\"*\"[/code] correspond aucun, un seul ou plusieurs caractères "
+"arbitraires, et [code]\"?\"[/code] correspond à un seule caracètre sauf un "
+"point ([code]\".\"[/code]). Une chaîne ou expression vide est toujours "
+"évaluée [code]false[/code]."
 
 #: doc/classes/String.xml
 msgid "Returns the MD5 hash of the string as an array of bytes."
-msgstr ""
+msgstr "Retourne le hachage MD5 de la chaîne dans un tableau d'octets."
 
 #: doc/classes/String.xml
 msgid "Returns the MD5 hash of the string as a string."
@@ -72912,6 +74590,9 @@ msgid ""
 "Percent-encodes a string. Encodes parameters in a URL when sending a HTTP "
 "GET request (and bodies of form-urlencoded POST requests)."
 msgstr ""
+"Encode avec des pourcentages une chaîne. Encode les paramètres dans une URL "
+"lors de l'envoi d'une requête HTTP GET (et les corps de requêtes POST sous "
+"forme codée)."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72919,6 +74600,9 @@ msgid ""
 "the string as a subpath. E.g. [code]\"this/is\".plus_file(\"path\") == "
 "\"this/is/path\"[/code]."
 msgstr ""
+"Si la chaîne est un chemin, ajoute [code]file[/code] à la fin de la chaîne "
+"comme sous-chemin. Par exemple : [code]\"vers/un\".plus_file(\"fichier\") == "
+"\"vers/un/fichier\"[/code]."
 
 #: doc/classes/String.xml
 msgid ""
@@ -72967,11 +74651,15 @@ msgstr ""
 "donnée."
 
 #: doc/classes/String.xml
+#, fuzzy
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -73010,6 +74698,12 @@ msgid ""
 "trim_suffix] method that will remove a single suffix string rather than a "
 "set of characters."
 msgstr ""
+"Retourne une copie de la chaîne avec des caractères retirés de la droite. "
+"L'argument [code]chars[/code] est une chaîne spécifiant l'ensemble des "
+"caractères à supprimer.\n"
+"[b]Note :[/b] [code]chars[/code] n'est pas un suffixe. Voir la méthode "
+"[method trim_suffix] qui supprimera une seule chaîne de suffixe plutôt qu'un "
+"ensemble de caractères."
 
 #: doc/classes/String.xml
 msgid "Returns the SHA-1 hash of the string as an array of bytes."
@@ -73064,9 +74758,13 @@ msgid "Returns a simplified canonical path."
 msgstr ""
 
 #: doc/classes/String.xml
+#, fuzzy
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -73104,12 +74802,20 @@ msgstr ""
 "utilisez plutôt la classe [RegEx]."
 
 #: doc/classes/String.xml
+#, fuzzy
 msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
+"Divise la chaîne en flottants en utilisant une chaîne comme délimiteur et "
+"retourne un tableau des sous-chaînes.\n"
+"Par exemple, [code]\"12,5,3\"[/code] retournera [code][1, 2.5, 3][/code] si "
+"délimité par [code]\",\"[/code]."
 
 #: doc/classes/String.xml
 msgid ""
@@ -73118,6 +74824,10 @@ msgid ""
 "end. The optional arguments are used to toggle stripping on the left and "
 "right edges respectively."
 msgstr ""
+"Retourne une copie de la chaîne avec tous les caractères non imprimable "
+"(soient les tabulations, les espaces et les retours à la ligne) supprimés en "
+"début et en fin de chaîne. Les arguments optionnels permettent d'activer ou "
+"non la suppression des caractères en début ou en fin respectivement."
 
 #: doc/classes/String.xml
 msgid ""
@@ -73126,6 +74836,11 @@ msgid ""
 "32), such as tabulation ([code]\\t[/code] in C) and newline ([code]\\n[/"
 "code] and [code]\\r[/code]) characters, but not spaces."
 msgstr ""
+"Retourne une copie de la chaîne avec tous les caractères d'échappement "
+"supprimés. Il s'agit de tous les caractères de commande non-imprimables de "
+"la première page de la table ASCII (< 32), tels que la tabulation "
+"([code]\\t[/code] in C) et le retour à la ligne ([code]\\n[/code] et "
+"[code]\\r[/code]), mais pas les espaces."
 
 #: doc/classes/String.xml
 msgid ""
@@ -73133,6 +74848,10 @@ msgid ""
 "[code]len[/code]. Argument [code]len[/code] is optional and using [code]-1[/"
 "code] will return remaining characters from given position."
 msgstr ""
+"Retourne une partie de la chaîne de la position [code]from[/code] avec la "
+"longueur [code]len[/code]. L'argument [code]len[/code] est optionnel et "
+"l'utilisation [code]-1[/code] renvoie les caractères restants à partir de la "
+"position donnée."
 
 #: doc/classes/String.xml
 msgid ""
@@ -73158,6 +74877,16 @@ msgid ""
 "print(\"1e3\".to_float()) # 1000\n"
 "[/codeblock]"
 msgstr ""
+"Convertit une chaîne contenant un nombre décimal en [code]float[/code]. La "
+"méthode s'arrêtera sur le premier caractère qui n'est pas un chiffre sauf le "
+"premier [code].[/code] (point décimal), et [code]e[/code] qui est utilisé "
+"pour l'exposant.\n"
+"[codeblock]\n"
+"print(\"12.3\".to_float()) # 12.3\n"
+"print(\"1.2.3\".to_float()) # 1.2\n"
+"print(\"12ab3\".to_float()) # 12\n"
+"print(\"1e3\".to_float()) # 1*10^3 = 1000\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid ""
@@ -73170,6 +74899,14 @@ msgid ""
 "print(\"1.2.3\".to_int()) # 1\n"
 "[/codeblock]"
 msgstr ""
+"Convertit une chaîne contenant un nombre entier en [code]int[/code]. La "
+"méthode supprimera tout caractère qui n'est pas un chiffre et s'arrêtera si "
+"elle rencontre un [code].[/code].\n"
+"[codeblock]\n"
+"print(\"123\".to_int()) # 123\n"
+"print(\"a1b2c3\".to_int()) # 123\n"
+"print(\"1.2.3\".to_int()) # 1\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid "Returns the string converted to lowercase."
@@ -73196,6 +74933,8 @@ msgid ""
 "Converts the String (which is an array of characters) to [PoolByteArray] "
 "(which is an array of bytes)."
 msgstr ""
+"Convertit la String (qui est un tableau de caractères) en [PoolByteArray] "
+"(un tableau d'octets)."
 
 #: doc/classes/String.xml
 msgid ""
@@ -73219,6 +74958,9 @@ msgid ""
 "([code].[/code] [code]:[/code] [code]@[/code] [code]/[/code] [code]\"[/"
 "code])."
 msgstr ""
+"Supprimer les caractères de la chaîne qui sont interdits dans les noms de "
+"[Node] ([code].[/code] [code]:[/code] [code]@[/code] [code]/[/code] et "
+"[code]\"[/code])."
 
 #: doc/classes/String.xml
 msgid ""
@@ -73274,6 +75016,8 @@ msgid ""
 "Returns the [CanvasItem] that handles its [constant CanvasItem."
 "NOTIFICATION_DRAW] or [method CanvasItem._draw] callback at this moment."
 msgstr ""
+"Retourne le [CanvasItem] qui gère sa [constant CanvasItem.NOTIFICATION_DRAW] "
+"ou sa méthode [method CanvasItem._draw] actuellement."
 
 #: doc/classes/StyleBox.xml
 msgid "Returns the default value of the specified [enum Margin]."
@@ -73284,6 +75028,9 @@ msgid ""
 "Returns the content margin offset for the specified [enum Margin].\n"
 "Positive values reduce size inwards, unlike [Control]'s margin values."
 msgstr ""
+"Retourne le décalage de la marge de contenu pour la [enum Margin] spécifié.\n"
+"Les valeurs positives réduisent la taille vers l'intérieur, contrairement "
+"aux valeurs des marges de [Control]."
 
 #: doc/classes/StyleBox.xml
 msgid "Returns the minimum size that this stylebox can be shrunk to."
@@ -73297,6 +75044,9 @@ msgid ""
 "equivalent to [code]Vector2(style.get_margin(MARGIN_LEFT), style."
 "get_margin(MARGIN_TOP))[/code]."
 msgstr ""
+"Retourne le \"décalage\" d'une boîte de style. Cette fonction d'aide "
+"retourne une valeur équivalente à [code]Vector2(style."
+"get_margin(MARGIN_LEFT), style.get_margin(MARGIN_TOP))[/code]."
 
 #: doc/classes/StyleBox.xml
 msgid ""
@@ -73333,6 +75083,9 @@ msgid ""
 "reduces the space available to the contents from the left.\n"
 "Refer to [member content_margin_bottom] for extra considerations."
 msgstr ""
+"La marge gauche pour le contenu de cette boîte de style. L'augmentation de "
+"cette valeur réduit l'espace disponible pour le contenu sur la gauche.\n"
+"Voir [membrer content_margin_bottom] pour des considérations supplémentaires."
 
 #: doc/classes/StyleBox.xml
 msgid ""
@@ -73340,6 +75093,9 @@ msgid ""
 "reduces the space available to the contents from the right.\n"
 "Refer to [member content_margin_bottom] for extra considerations."
 msgstr ""
+"La marge droite pour le contenu de cette boîte de style. L'augmentation de "
+"cette valeur réduit l'espace disponible pour le contenu sur la droite.\n"
+"Voir [membrer content_margin_bottom] pour des considérations supplémentaires."
 
 #: doc/classes/StyleBox.xml
 msgid ""
@@ -73347,6 +75103,9 @@ msgid ""
 "reduces the space available to the contents from the top.\n"
 "Refer to [member content_margin_bottom] for extra considerations."
 msgstr ""
+"La marge supérieure pour le contenu de cette boîte de style. Augmenter cette "
+"valeur réduit l'espace disponible pour le contenu en haut.\n"
+"Voir [membrer content_margin_bottom] pour des considérations supplémentaires."
 
 #: doc/classes/StyleBoxEmpty.xml
 msgid "Empty stylebox (does not display anything)."
@@ -73680,6 +75439,8 @@ msgid ""
 "The shadow offset in pixels. Adjusts the position of the shadow relatively "
 "to the stylebox."
 msgstr ""
+"Le décalage de l'ombre en pixels. Ajuste la position de l'ombre relativement "
+"à la boîte de style."
 
 #: doc/classes/StyleBoxFlat.xml
 msgid "The shadow size in pixels."
@@ -73709,6 +75470,8 @@ msgid ""
 "[StyleBox] that displays a single line of a given color and thickness. It "
 "can be used to draw things like separators."
 msgstr ""
+"Une [StyleBox] qui affiche simplement une ligne de couleur et d'épaisseur "
+"données. Ça peut être utilisé pour dessiner des séparateurs par exemple."
 
 #: doc/classes/StyleBoxLine.xml
 msgid "The line's color."
@@ -73773,12 +75536,18 @@ msgid ""
 "Controls how the stylebox's texture will be stretched or tiled horizontally. "
 "See [enum AxisStretchMode] for possible values."
 msgstr ""
+"Contrôle la façon dont la texture de la boîte de style sera étirée ou "
+"répétée horizontalement. Voir [enum AxisStretchMode] pour les valeurs "
+"possibles."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
 "Controls how the stylebox's texture will be stretched or tiled vertically. "
 "See [enum AxisStretchMode] for possible values."
 msgstr ""
+"Contrôle la façon dont la texture de la boîte de style sera étirée ou "
+"répétée verticalement. Voir [enum AxisStretchMode] pour les valeurs "
+"possibles."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
@@ -73790,18 +75559,24 @@ msgid ""
 "Expands the bottom margin of this style box when drawing, causing it to be "
 "drawn larger than requested."
 msgstr ""
+"Augmente la marge du bas de cette boite de style lors de l'affichage, pour "
+"qu'elle soit plus grande que demandé."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
 "Expands the left margin of this style box when drawing, causing it to be "
 "drawn larger than requested."
 msgstr ""
+"Augmente la marge gauche de cette boite de style lors de l'affichage, pour "
+"qu'elle soit plus grande que demandé."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
 "Expands the right margin of this style box when drawing, causing it to be "
 "drawn larger than requested."
 msgstr ""
+"Augmente la marge droite de cette boite de style lors de l'affichage, pour "
+"qu'elle soit plus grande que demandé."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
@@ -73819,6 +75594,12 @@ msgid ""
 "This is also the value used as fallback for [member StyleBox."
 "content_margin_bottom] if it is negative."
 msgstr ""
+"Augmente la marge inférieure de la boîte de texture en 3×3.\n"
+"Une valeur plus élevée signifie qu'une plus grande partie de la texture "
+"source est considérée comme faisant partie de la bordure inférieure de la "
+"boîte en 3×3.\n"
+"C'est aussi la valeur de repli utilisée pour [member StyleBox."
+"content_margin_bottom] si elle est négative."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
@@ -73828,6 +75609,12 @@ msgid ""
 "This is also the value used as fallback for [member StyleBox."
 "content_margin_left] if it is negative."
 msgstr ""
+"Augmente la marge gauche de la boîte de texture en 3×3.\n"
+"Une valeur plus élevée signifie qu'une plus grande partie de la texture "
+"source est considérée comme faisant partie de la bordure gauche de la boîte "
+"3×3.\n"
+"C'est aussi la valeur de repli utilisée pour [member StyleBox."
+"content_margin_left] si elle est négative."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
@@ -73837,6 +75624,12 @@ msgid ""
 "This is also the value used as fallback for [member StyleBox."
 "content_margin_right] if it is negative."
 msgstr ""
+"Augmente la marge droite de la boîte de texture en 3×3.\n"
+"Une valeur plus élevée signifie qu'une plus grande partie de la texture "
+"source est considérée comme faisant partie de la droite frontière de la "
+"boîte 3×3.\n"
+"C'est aussi la valeur de repli utilisée pour [member StyleBox."
+"content_margin_right] si elle est négative."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
@@ -73846,10 +75639,17 @@ msgid ""
 "This is also the value used as fallback for [member StyleBox."
 "content_margin_top] if it is negative."
 msgstr ""
+"Augmente la marge supérieure de la boîte de texture en 3×3.\n"
+"Une valeur plus élevée signifie qu'une plus grande partie de la texture "
+"source est considérée comme faisant partie de la bordure supérieure de la "
+"boîte 3×3.\n"
+"C'est aussi la valeur de repli utilisée pour [member StyleBox."
+"content_margin_top] si elle est négative."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid "Modulates the color of the texture when this style box is drawn."
 msgstr ""
+"Module la couleur de la texture lorsque cette boîte de style est dessinée."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
@@ -73866,6 +75666,9 @@ msgid ""
 "This is equivalent to first wrapping the texture in an [AtlasTexture] with "
 "the same region."
 msgstr ""
+"Spécifié la sous-région de la texture à utiliser.\n"
+"C'est l'équivalent à d'abord mettre la texture dans un [AtlasTexture] avec "
+"la même région."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid "The texture to use when drawing this style box."
@@ -73880,6 +75683,9 @@ msgid ""
 "Stretch the stylebox's texture. This results in visible distortion unless "
 "the texture size matches the stylebox's size perfectly."
 msgstr ""
+"Étire la texture de la boîte de style. Cela entraîne une distorsion visible "
+"à moins que la taille de la texture ne corresponde parfaitement à la taille "
+"de la boîte de style."
 
 #: doc/classes/StyleBoxTexture.xml
 msgid ""
@@ -74004,6 +75810,10 @@ msgid ""
 "current index (if also using index arrays) should use smooth normals for "
 "normal calculation."
 msgstr ""
+"Spécifie si les sommets actuels (uniquement si seulement des tableaux de "
+"sommets sont utilisés) ou l'index courant (si des tableaux d'index sont "
+"également utilisés) devraient utiliser des normales lisses dans le calcul "
+"des normales."
 
 #: doc/classes/SurfaceTool.xml
 msgid ""
@@ -74080,6 +75890,8 @@ msgid ""
 "Called before adding any vertices. Takes the primitive type as an argument "
 "(e.g. [constant Mesh.PRIMITIVE_TRIANGLES])."
 msgstr ""
+"Appelé avant d'ajouter des sommets. Cela prend le type primitif comme "
+"argument (par exemple [constant Mesh. PRIMITIVE_TRIANGES])."
 
 #: doc/classes/SurfaceTool.xml
 msgid "Clear all information passed into the surface tool so far."
@@ -74214,6 +76026,9 @@ msgid ""
 "Returns [code]-1[/code] if the point is outside the control boundaries or if "
 "there's no tab at the queried position."
 msgstr ""
+"Retourne l'index de l'onglet aux coordonnées [code]point[/code] locales. "
+"Retourne [code]-1[/code] si le point est en dehors des limites du contrôle "
+"ou s'il n'y a pas d'onglet à la position demandée."
 
 #: doc/classes/TabContainer.xml
 msgid ""
@@ -74221,16 +76036,22 @@ msgid ""
 "default to the name of the indexed child node, but this can be overridden "
 "with [method set_tab_title]."
 msgstr ""
+"Retourne le titre de l'onglet à l'index [code]tab_idx[/code]. Le titres des "
+"onglets sont par défaut le nom des nœuds enfants indexés, mais ça peut être "
+"changé avec [method set_tab_title]."
 
 #: doc/classes/TabContainer.xml
 msgid "Returns the [TabContainer] rearrange group id."
-msgstr ""
+msgstr "Retourne l'identifiant du groupe de réarrangement du [TabContainer]."
 
 #: doc/classes/TabContainer.xml
 msgid ""
 "If set on a [Popup] node instance, a popup menu icon appears in the top-"
 "right corner of the [TabContainer]. Clicking it will expand the [Popup] node."
 msgstr ""
+"Si défini sur une instance de nœud [Popup], une icône de menu apparaît dans "
+"le coin supérieur droit du [TabContainer]. En cliquant dessus, le nœud "
+"[Popup] sera développé."
 
 #: doc/classes/TabContainer.xml doc/classes/Tabs.xml
 msgid ""
@@ -74257,6 +76078,8 @@ msgid ""
 "Sets a title for the tab at index [code]tab_idx[/code]. Tab titles default "
 "to the name of the indexed child node."
 msgstr ""
+"Définit un titre pour l'onglet à l'index [code]tab_idx[/code]. Les titres "
+"par défaut des onglets sont le nom des nœud indexés."
 
 #: doc/classes/TabContainer.xml
 msgid ""
@@ -74264,12 +76087,18 @@ msgid ""
 "enable tab drag between [TabContainer]. Enable drag with [member "
 "drag_to_rearrange_enabled]."
 msgstr ""
+"Définit l'identifiant de groupe de réarrangement, choisissez pour chaque "
+"[TabContainer] la même valeur pour activer le déposé-glissé entre les "
+"[TabContainer]. Activer le déposé-glissé avec [member "
+"drag_to_rearrange_enabled]."
 
 #: doc/classes/TabContainer.xml
 msgid ""
 "If [code]true[/code], all tabs are drawn in front of the panel. If "
 "[code]false[/code], inactive tabs are drawn behind the panel."
 msgstr ""
+"Si [code]true[/code], tous les onglets sont dessinés devant le panneau. Si "
+"[code]false[/code], les onglets inactifs sont dessinés derrière le panneau."
 
 #: doc/classes/TabContainer.xml
 msgid ""
@@ -74277,6 +76106,9 @@ msgid ""
 "[code]visible[/code] property is set to [code]true[/code] and all others are "
 "set to [code]false[/code]."
 msgstr ""
+"L'index actuel de l'onglet. Quand définie, cette propriété [code]visible[/"
+"code] du nœud [Control] pour cet index sera mis à [code]true[/code] et "
+"toutes les autres seront à [code]false[/code]."
 
 #: doc/classes/TabContainer.xml doc/classes/Tabs.xml
 msgid "If [code]true[/code], tabs can be rearranged with mouse drag."
@@ -74306,6 +76138,9 @@ msgid ""
 "minimum size take into account in the total, instead of only the currently "
 "visible one."
 msgstr ""
+"Si [code]true[/code], les nœuds [Control] enfants qui sont cachés auront "
+"leur taille minimale qui sera prise en compte dans le total, au lieu de "
+"seulement celle actuellement visible."
 
 #: doc/classes/TabContainer.xml
 msgid ""
@@ -74365,6 +76200,10 @@ msgid ""
 "fit in the container width. When the button is disabled (i.e. the first tab "
 "is visible), it appears semi-transparent."
 msgstr ""
+"L'icône pour le bouton flèche de gauche qui apparaît quand il y a trop "
+"d'onglets à afficher dans le conteneur. Lorsque le bouton est désactivé "
+"(c'est-à-dire le premier onglet est visible), il apparaît en semi-"
+"transparent."
 
 #: doc/classes/TabContainer.xml doc/classes/Tabs.xml
 msgid ""
@@ -74372,6 +76211,9 @@ msgid ""
 "fit in the container width. Used when the button is being hovered with the "
 "cursor."
 msgstr ""
+"L'icône pour le bouton flèche de gauche qui apparaît quand il y a trop "
+"d'onglets à afficher dans le conteneur. Utilisé quand le bouton est survolé "
+"par le curseur."
 
 #: doc/classes/TabContainer.xml doc/classes/Tabs.xml
 msgid ""
@@ -74379,6 +76221,10 @@ msgid ""
 "fit in the container width. When the button is disabled (i.e. the last tab "
 "is visible) it appears semi-transparent."
 msgstr ""
+"L'icône pour le bouton flèche de droite qui apparaît quand il y a trop "
+"d'onglets à afficher dans le conteneur. Lorsque le bouton est désactivé "
+"(c'est-à-dire le dernier onglet est visible), il apparaît en semi-"
+"transparent."
 
 #: doc/classes/TabContainer.xml doc/classes/Tabs.xml
 msgid ""
@@ -74386,6 +76232,9 @@ msgid ""
 "fit in the container width. Used when the button is being hovered with the "
 "cursor."
 msgstr ""
+"L'icône pour le bouton flèche de droite qui apparaît quand il y a trop "
+"d'onglets à afficher dans le conteneur. Utilisé quand le bouton est survolé "
+"par le curseur."
 
 #: doc/classes/TabContainer.xml
 msgid "The icon for the menu button (see [method set_popup])."
@@ -74434,13 +76283,16 @@ msgstr "Ajoute un nouvel onglet."
 
 #: doc/classes/Tabs.xml
 msgid "Moves the scroll view to make the tab visible."
-msgstr ""
+msgstr "Déplace la vue de défilement pour rendre l'onglet visible."
 
 #: doc/classes/Tabs.xml
 msgid ""
 "Returns [code]true[/code] if the offset buttons (the ones that appear when "
 "there's not enough space for all tabs) are visible."
 msgstr ""
+"Retourne [code]true[/code] si les boutons de décalage (les boutons qui "
+"apparaissent lorsqu'il n'y a pas assez d'espace pour tous les onglets) sont "
+"visibles."
 
 #: doc/classes/Tabs.xml
 msgid "Returns [code]true[/code] if select with right mouse button is enabled."
@@ -74448,8 +76300,13 @@ msgstr ""
 "Retourne [code]true[/code] si la sélection avec le clic-droit est actif."
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Retourne le titre de l'onglet à la position [code]idx[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
-msgstr ""
+msgstr "Retourne le nombre d'onglets cachés décalés vers la gauche."
 
 #: doc/classes/Tabs.xml
 msgid "Returns tab [Rect2] with local position and size."
@@ -74461,7 +76318,7 @@ msgstr "Retourne le titre de l'onglet à la position [code]idx[/code]."
 
 #: doc/classes/Tabs.xml
 msgid "Returns the [Tabs]' rearrange group ID."
-msgstr ""
+msgstr "Retourne l'identifiant de groupe du [Tab]."
 
 #: doc/classes/Tabs.xml
 msgid "Moves a tab from [code]from[/code] to [code]to[/code]."
@@ -74479,6 +76336,11 @@ msgstr ""
 "le clic droit."
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Définit une icône pour l'onglet à la position [code]tab_idx[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 "Définit une [code]icon[/code] pour l'onglet à la position [code]tab_idx[/"
@@ -74506,6 +76368,8 @@ msgid ""
 "if [code]true[/code], the mouse's scroll wheel can be used to navigate the "
 "scroll view."
 msgstr ""
+"si [code]true[/code], la roue de défilement de la souris permet de naviguer "
+"dans la vue de défilement."
 
 #: doc/classes/Tabs.xml
 msgid "The alignment of all tabs. See [enum TabAlign] for details."
@@ -74517,6 +76381,8 @@ msgid ""
 "Sets when the close button will appear on the tabs. See [enum "
 "CloseButtonDisplayPolicy] for details."
 msgstr ""
+"Définit lorsque le bouton de fermeture apparaîtra sur les onglets. Voir "
+"[enum CloseButtonDisplayPolicy] pour plus de détails."
 
 #: doc/classes/Tabs.xml
 msgid ""
@@ -74527,8 +76393,12 @@ msgstr ""
 "drag_to_rearrange_enabled]."
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
-msgstr "Émis quand un onglet a été cliqué-droit."
+#, fuzzy
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
+msgstr ""
+"Émis lorsqu'un bouton personnalisé est pressé. Voir [method add_button]."
 
 #: doc/classes/Tabs.xml
 msgid "Emitted when a tab is clicked, even if it is the current tab."
@@ -74597,6 +76467,8 @@ msgid ""
 "A TCP server. Listens to connections on a port and returns a [StreamPeerTCP] "
 "when it gets an incoming connection."
 msgstr ""
+"Un serveur TCP. Ecoute les connexions sur un port et retourne un "
+"[StreamPeerTCP] quand il obtient une connexion entrante."
 
 #: doc/classes/TCP_Server.xml
 msgid "Returns [code]true[/code] if a connection is available for taking."
@@ -74654,6 +76526,7 @@ msgstr ""
 #: doc/classes/TextEdit.xml
 msgid "Adds color region (given the delimiters) and its colors."
 msgstr ""
+"Ajoute une région de couleur (à partir des délimiteurs) et ses couleurs."
 
 #: doc/classes/TextEdit.xml
 msgid "Adds a [code]keyword[/code] and its [Color]."
@@ -74664,18 +76537,25 @@ msgid ""
 "Returns if the given line is foldable, that is, it has indented lines right "
 "below it."
 msgstr ""
+"Retourne si la ligne donnée peut être réduite, c'est-à-dire qu'elle indente "
+"les lignes juste en dessous."
 
 #: doc/classes/TextEdit.xml
 msgid ""
 "Centers the viewport on the line the editing cursor is at. This also resets "
 "the [member scroll_horizontal] value to [code]0[/code]."
 msgstr ""
+"Centre le fenêtre d'affichage sur la ligne où est le curseur d'édition. Cela "
+"réinitialise également la valeur [member scroll_horizontal] à [code]0[/code]."
 
 #: doc/classes/TextEdit.xml
 msgid ""
 "Clears all custom syntax coloring information previously added with [method "
 "add_color_region] or [method add_keyword_color]."
 msgstr ""
+"Efface toutes les informations de coloration de syntaxe personnalisées "
+"précédemment ajoutées avec [method add_color_region] ou [method "
+"add_keyword_color]."
 
 #: doc/classes/TextEdit.xml
 msgid "Clears the undo history."
@@ -74699,6 +76579,9 @@ msgid ""
 "If [code]adjust_viewport[/code] is set to [code]true[/code], the viewport "
 "will center at the cursor position after the move occurs."
 msgstr ""
+"Déplace le curseur à l'index [code]column[/code] spécifié.\n"
+"Si [code]adjust_viewport[/code] est défini à [code]true[/code], le fenêtre "
+"d'affichage se centrera à la position du curseur après le mouvement."
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -74720,10 +76603,11 @@ msgstr "Désélectionne la sélection actuelle."
 #: doc/classes/TextEdit.xml
 msgid "Folds all lines that are possible to be folded (see [method can_fold])."
 msgstr ""
+"Réduit toutes les lignes qui peuvent être réduites (voir [method can_fold])."
 
 #: doc/classes/TextEdit.xml
 msgid "Folds the given line, if possible (see [method can_fold])."
-msgstr ""
+msgstr "Réduit la ligne donnée, si possible (voir [method can_fold])."
 
 #: doc/classes/TextEdit.xml
 msgid "Returns an array containing the line number of each breakpoint."
@@ -74742,6 +76626,8 @@ msgid ""
 "Returns the line and column at the given position. In the returned vector, "
 "[code]x[/code] is the column, [code]y[/code] is the line."
 msgstr ""
+"Retourne la ligne et la colonne à la position donnée. Dans le vecteur "
+"retourné, [code]x[/code] est la colonne, [code]y[/code] est la ligne."
 
 #: doc/classes/TextEdit.xml
 msgid "Returns the amount of total lines in the text."
@@ -74749,7 +76635,7 @@ msgstr "Retourne le nombre total de lignes dans le texte."
 
 #: doc/classes/TextEdit.xml
 msgid "Returns the height of a largest line."
-msgstr ""
+msgstr "Retourne la hauteur de la plus grande ligne."
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -74815,7 +76701,7 @@ msgstr ""
 
 #: doc/classes/TextEdit.xml
 msgid "Returns the total amount of lines that could be drawn."
-msgstr ""
+msgstr "Retourne le nombre total des lignes qui pourraient être affichées."
 
 #: doc/classes/TextEdit.xml
 msgid "Returns the number of visible lines, including wrapped text."
@@ -74848,11 +76734,11 @@ msgstr "Insérer le texte spécifié à la position du curseur."
 
 #: doc/classes/TextEdit.xml
 msgid "Returns whether the line at the specified index is folded or not."
-msgstr ""
+msgstr "Retourne si la ligne à l'index spécifié est réduite ou non."
 
 #: doc/classes/TextEdit.xml
 msgid "Returns whether the line at the specified index is hidden or not."
-msgstr ""
+msgstr "Retourne si la ligne de l'index spécifié est cachée ou non."
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -74866,12 +76752,16 @@ msgid ""
 "Returns [code]true[/code] when the specified [code]line[/code] has a "
 "breakpoint."
 msgstr ""
+"Retourne [code]true[/code] lorsque la ligne [code]line[/code] spécifié a un "
+"point d'arrêt."
 
 #: doc/classes/TextEdit.xml
 msgid ""
 "Returns [code]true[/code] when the specified [code]line[/code] is marked as "
 "safe."
 msgstr ""
+"Retourne [code]true[/code] lorsque la ligne [code]line[/code] spécifié est "
+"marquée comme sûre."
 
 #: doc/classes/TextEdit.xml
 msgid "Returns if the given line is wrapped."
@@ -74882,6 +76772,9 @@ msgid ""
 "Returns whether the mouse is over selection. If [code]edges[/code] is "
 "[code]true[/code], the edges are considered part of the selection."
 msgstr ""
+"Retourne si la souris est sur la sélection. Si [code]edges[/code] est "
+"[code]true[/code], les bords sont considérés comme faisant partie de la "
+"sélection."
 
 #: doc/classes/TextEdit.xml
 msgid "Returns [code]true[/code] if the selection is active."
@@ -74908,6 +76801,8 @@ msgid ""
 "Removes all the breakpoints. This will not fire the [signal "
 "breakpoint_toggled] signal."
 msgstr ""
+"Retire tous les points d'arrêt. Cela n'émettra pas [signal "
+"breakpoint_toggled]."
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -74942,6 +76837,9 @@ msgid ""
 "Perform selection, from line/column to line/column.\n"
 "If [member selecting_enabled] is [code]false[/code], no selection will occur."
 msgstr ""
+"Effectue une sélection, de la ligne/colonne à la ligne/colonne.\n"
+"Si [member selection_enabled] est [code]false[/code], aucune sélection ne "
+"sera effectuée."
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -74962,9 +76860,9 @@ msgid ""
 "code]. Deletes the bookmark if [code]bookmark[/code] is [code]false[/code].\n"
 "Bookmarks are shown in the [member breakpoint_gutter]."
 msgstr ""
-"Ajoute un marque-page pour la ligne [code]line[/code] si "
-"[code]bookmark[/code] est [code]true[/code]. Supprime le marque-page si "
-"[code]bookmark[/code] est [code]false[/code].\n"
+"Ajoute un marque-page pour la ligne [code]line[/code] si [code]bookmark[/"
+"code] est [code]true[/code]. Supprime le marque-page si [code]bookmark[/"
+"code] est [code]false[/code].\n"
 "Les marque-pages sont affichés dans [member breakpoint_gutter]."
 
 #: doc/classes/TextEdit.xml
@@ -74972,6 +76870,8 @@ msgid ""
 "Adds or removes the breakpoint in [code]line[/code]. Breakpoints are shown "
 "in the [member breakpoint_gutter]."
 msgstr ""
+"Ajoute ou supprime le point d'arrêt à [code]line[/code]. Les points d'arrêt "
+"sont indiqués dans le [member breakpoint_gutter]."
 
 #: doc/classes/TextEdit.xml
 msgid "If [code]true[/code], hides the line of the specified index."
@@ -74983,10 +76883,13 @@ msgid ""
 "This will show the line number with the color provided in the "
 "[code]safe_line_number_color[/code] theme property."
 msgstr ""
+"Si [code]true[/code], marque la [code]line[/code] comme sûre.\n"
+"Cela montrera le numéro de ligne avec la couleur fournie dans la propriété "
+"[code]safe_line_number_color[/code] du thème."
 
 #: doc/classes/TextEdit.xml
 msgid "Toggle the folding of the code block at the given line."
-msgstr ""
+msgstr "Réduit le bloc de code à la ligne donnée."
 
 #: doc/classes/TextEdit.xml
 msgid "Perform undo operation."
@@ -75001,6 +76904,8 @@ msgid ""
 "Unhide all lines that were previously set to hidden by [method "
 "set_line_as_hidden]."
 msgstr ""
+"Ré-affiche toutes les lignes qui étaient précédemment cachées par [method "
+"set_line_as_hidden]."
 
 #: doc/classes/TextEdit.xml
 msgid "If [code]true[/code], the bookmark gutter is visible."
@@ -75024,6 +76929,10 @@ msgid ""
 "before displaying the context menu.\n"
 "If [code]false[/code], the context menu disregards mouse location."
 msgstr ""
+"Si [code]true[/code], un clic droit déplace le curseur à la position de la "
+"souris avant d'afficher le menu contextuel.\n"
+"Si [code]false[/code], la position du menu contextuel ignore l'emplacement "
+"de la souris."
 
 #: doc/classes/TextEdit.xml
 msgid "If [code]true[/code], a right-click displays the context menu."
@@ -75031,7 +76940,7 @@ msgstr "Si [code]true[/code], un clic droit affiche le menu contextuel."
 
 #: doc/classes/TextEdit.xml
 msgid "If [code]true[/code], allow drag and drop of selected text."
-msgstr ""
+msgstr "Si [code]true[/code], permet le déposé-glissé du texte sélectionné."
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -75056,6 +76965,8 @@ msgid ""
 "If [code]true[/code], all lines that have been set to hidden by [method "
 "set_line_as_hidden], will not be visible."
 msgstr ""
+"Si [code]true[/code], toutes les lignes qui ont été cachées par [method "
+"set_line_as_hidden] ne seront pas visibles."
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -75103,12 +77014,17 @@ msgid ""
 "If there is a horizontal scrollbar, this determines the current horizontal "
 "scroll value in pixels."
 msgstr ""
+"S'il y a une barre de défilement horizontale, cela détermine le décalage de "
+"défilement horizontal actuel en pixels."
 
 #: doc/classes/TextEdit.xml
 msgid ""
 "If there is a vertical scrollbar, this determines the current vertical "
 "scroll value in line numbers, starting at 0 for the top line."
 msgstr ""
+"S'il y a une barre de défilement verticale, cela détermine le décalage de "
+"défilement vertical actuel en nombres de lignes, en commençant par 0 pour la "
+"ligne du haut."
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -75116,29 +77032,39 @@ msgid ""
 "If [code]false[/code], text can not be selected by the user or by the "
 "[method select] or [method select_all] methods."
 msgstr ""
+"Si [code]true[/code], le texte peut être sélectionné.\n"
+"Si [code]false[/code], le texte ne peut pas être sélectionné par "
+"l'utilisateur ou par les méthodes [method select] ou [method select_all]."
 
 #: doc/classes/TextEdit.xml
 msgid ""
 "If [code]true[/code], shortcut keys for context menu items are enabled, even "
 "if the context menu is disabled."
 msgstr ""
+"Si [code]true[/code], les touches de raccourcies pour les éléments de menu "
+"contextuel sont activées, même si le menu contextuel est désactivé."
 
 #: doc/classes/TextEdit.xml
 msgid ""
 "If [code]true[/code], line numbers are displayed to the left of the text."
 msgstr ""
+"Si [code]true[/code], les numéros de ligne sont affichés à gauche du texte."
 
 #: doc/classes/TextEdit.xml
 msgid ""
 "If [code]true[/code], sets the [code]step[/code] of the scrollbars to "
 "[code]0.25[/code] which results in smoother scrolling."
 msgstr ""
+"Si [code]true[/code], définit le [code]step[/code] des barres de défilement "
+"à [code]0.25[/code] qui permet de défiler plus facilement."
 
 #: doc/classes/TextEdit.xml
 msgid ""
 "If [code]true[/code], any custom color properties that have been set for "
 "this [TextEdit] will be visible."
 msgstr ""
+"Si [code]true[/code], toutes les propriétés de couleur personnalisées qui "
+"ont été définies pour ce [TextEdit] seront visibles."
 
 #: doc/classes/TextEdit.xml
 msgid "String value of the [TextEdit]."
@@ -75153,6 +77079,8 @@ msgid ""
 "If [code]true[/code], enables text wrapping when it goes beyond the edge of "
 "what is visible."
 msgstr ""
+"Si [code]true[/code], permet le retour à la ligne quand le texte dépasse ce "
+"qui est visible."
 
 #: doc/classes/TextEdit.xml
 msgid "Emitted when a breakpoint is placed via the breakpoint gutter."
@@ -75228,6 +77156,8 @@ msgid ""
 "Sets the [Color] of the breakpoints. [member breakpoint_gutter] has to be "
 "enabled."
 msgstr ""
+"Définit la [Color] des points d'arrêt. [member breakpoint_gutter] doit être "
+"activé."
 
 #: doc/classes/TextEdit.xml
 msgid "Sets the font [Color]."
@@ -75353,18 +77283,28 @@ msgid ""
 "canvas_item_add_texture_rect] with a rect at [code]position[/code] and the "
 "size of this [Texture]."
 msgstr ""
+"Dessine la texture en utilisant un [CanvasItem] avec l'API du [VisualServer] "
+"à la [code]position[/code] spécifiée. Équivalent à [method VisualServer."
+"canvas_item_add_texture_rect] avec un rectangle à [code]position[/code] et "
+"la taille de cette [Texture]."
 
 #: doc/classes/Texture.xml
 msgid ""
 "Draws the texture using a [CanvasItem] with the [VisualServer] API. "
 "Equivalent to [method VisualServer.canvas_item_add_texture_rect]."
 msgstr ""
+"Dessine la texture en utilisant un [CanvasItem] avec l'API du "
+"[VisualServer]. Équivalent à [method VisualServer."
+"canvas_item_add_texture_rect]."
 
 #: doc/classes/Texture.xml
 msgid ""
 "Draws a part of the texture using a [CanvasItem] with the [VisualServer] "
 "API. Equivalent to [method VisualServer.canvas_item_add_texture_rect_region]."
 msgstr ""
+"Dessine une partie de la texture en utilisant un [CanvasItem] avec l'API du "
+"[VisualServer]. Équivalent à [method VisualServer."
+"canvas_item_add_texture_rect_region]."
 
 #: doc/classes/Texture.xml
 msgid ""
@@ -75389,12 +77329,16 @@ msgstr "Renvoie la largeur de texture."
 #: doc/classes/Texture.xml
 msgid "Returns [code]true[/code] if this [Texture] has an alpha channel."
 msgstr ""
+"Retourne [code]true[/code] si cette [Texture] a une transparence (canal "
+"alpha)."
 
 #: doc/classes/Texture.xml
 msgid ""
 "The texture's [enum Flags]. [enum Flags] are used to set various properties "
 "of the [Texture]."
 msgstr ""
+"Les [enum Flags] de la texture. [enum Flags] sont utilisés pour définir "
+"différentes propriétés de la [Texture]."
 
 #: doc/classes/Texture.xml
 msgid ""
@@ -75418,10 +77362,14 @@ msgid ""
 "[b]Note:[/b] Ignored when using an [AtlasTexture] as these don't support "
 "repetition."
 msgstr ""
+"Répète la texture (au lieu de la limiter aux bords).\n"
+"[b]Note :[/b] Ignoré avec les [AtlasTexture] puisqu'ils ne supportent pas la "
+"répétition."
 
 #: doc/classes/Texture.xml doc/classes/VisualServer.xml
 msgid "Uses a magnifying filter, to enable smooth zooming in of the texture."
 msgstr ""
+"Utilise un filtre grossissant, pour permettre un zoom lisse sur la texture."
 
 #: doc/classes/Texture.xml doc/classes/TextureLayered.xml
 #: doc/classes/VisualServer.xml
@@ -75430,6 +77378,10 @@ msgid ""
 "texture with different aspect ratios.\n"
 "This results in better-looking textures when viewed from oblique angles."
 msgstr ""
+"Utilise le filtrage de mipmap anisotrope. Génère des versions plus petites "
+"de la même texture avec différents ratios d'aspect.\n"
+"Cela donne des textures plus jolies lorsqu'elles sont vues à partir d'angles "
+"obliques."
 
 #: doc/classes/Texture.xml doc/classes/VisualServer.xml
 msgid "Converts the texture to the sRGB color space."
@@ -75441,6 +77393,9 @@ msgid ""
 "[b]Note:[/b] Ignored when using an [AtlasTexture] as these don't support "
 "repetition."
 msgstr ""
+"Répète la texture avec en alternant des sections en miroir.\n"
+"[b]Note :[/b] Ignoré avec les [AtlasTexture] puisqu'ils ne supportent pas la "
+"répétition."
 
 #: doc/classes/Texture.xml doc/classes/VisualServer.xml
 msgid "Texture is a video surface."
@@ -75448,7 +77403,7 @@ msgstr "La texture est une surface vidéo."
 
 #: doc/classes/Texture3D.xml
 msgid "Texture with 3 dimensions."
-msgstr ""
+msgstr "Une texture à 3 dimensions."
 
 #: doc/classes/Texture3D.xml
 msgid ""
@@ -75641,6 +77596,8 @@ msgid ""
 "Texture to display by default, when the node is [b]not[/b] in the disabled, "
 "focused, hover or pressed state."
 msgstr ""
+"La texture à afficher par défault, quand le nœud n'est [b]pas[/b] dans "
+"l'état désactivé, avec focus, survolé or pressé."
 
 #: doc/classes/TextureButton.xml
 msgid ""
@@ -75648,6 +77605,9 @@ msgid ""
 "focus and the player presses the Enter key or if the player presses the "
 "[member BaseButton.shortcut] key."
 msgstr ""
+"La texture à afficher quand la souris appuie sur le nœud, si quand le nœud a "
+"le focus du clavier et que l'utilisateur appuie sur la touche Entrée, ou "
+"quand l'utilisateur appuie sur la touche [member BaseButton.shortcut]."
 
 #: doc/classes/TextureButton.xml doc/classes/TextureRect.xml
 msgid "Scale to fit the node's bounding rectangle."
@@ -76699,7 +78659,6 @@ msgid "If [code]true[/code], this TileMap bakes a navigation region."
 msgstr ""
 
 #: doc/classes/TileMap.xml
-#, fuzzy
 msgid "If [code]true[/code], the cell's UVs will be clipped."
 msgstr "Si [code]true[/code], les UV de la cellule seront limités."
 
@@ -78183,7 +80142,6 @@ msgid "Control to show a tree of items."
 msgstr "Un contrôle pour afficher l'arborescence d'éléments."
 
 #: doc/classes/Tree.xml
-#, fuzzy
 msgid ""
 "This shows a tree of items that can be selected, expanded and collapsed. The "
 "tree can have multiple columns with custom controls like text editing, "
@@ -79099,6 +81057,9 @@ msgid ""
 "using [method get_metadata]. This can be used, for example, to store a "
 "reference to the original data."
 msgstr ""
+"Définit la valeur des métadonnées pour la colonne donnée, qui peut être "
+"récupérée ultérieurement en utilisant [method get_metadata]. Cela peut être "
+"utilisé, par exemple, pour stocker une référence aux données d'origine."
 
 #: doc/classes/TreeItem.xml
 msgid "Sets the value of a [constant CELL_MODE_RANGE] column."
@@ -79111,6 +81072,10 @@ msgid ""
 "If [code]expr[/code] is [code]true[/code], the edit mode slider will use an "
 "exponential scale as with [member Range.exp_edit]."
 msgstr ""
+"Définit la gamme de valeurs acceptées pour une colonne. La colonne doit être "
+"dans le mode [constant CELL_MODE_RANGE].\n"
+"Si [code]expr[/code] est [code]true[/code], le glisseur d'édition utilisera "
+"une échelle exponentielle comme avec [member Range.exp_edit]."
 
 #: doc/classes/TreeItem.xml
 msgid "If [code]true[/code], the given column is selectable."
@@ -79121,6 +81086,8 @@ msgid ""
 "Sets a string to be shown after a column's value (for example, a unit "
 "abbreviation)."
 msgstr ""
+"Définit un texte à afficher après la valeur d'une colonne (par exemple, une "
+"abréviation d'unité)."
 
 #: doc/classes/TreeItem.xml
 msgid "Sets the given column's text value."
@@ -79131,6 +81098,8 @@ msgid ""
 "Sets the given column's text alignment. See [enum TextAlign] for possible "
 "values."
 msgstr ""
+"Définit l'alignement du texte de la colonne donnée. Voir [enum TextAlign] "
+"pour les valeurs possibles."
 
 #: doc/classes/TreeItem.xml
 msgid "Sets the given column's tooltip text."
@@ -79240,6 +81209,15 @@ msgid ""
 "direction of the interpolation. See the class description for more "
 "information."
 msgstr ""
+"Suit la méthode [code]method[/code] de [code]object[/code] et applique la "
+"valeur retournée sur la méthode [code]target_method[/code] de [code]target[/"
+"code], en partant de [code]initial_val[/code] pendant [code]duration[/code] "
+"secondes, après [code]delay[/code] secondes. Les méthodes sont appelées avec "
+"des valeurs consécutives.\n"
+"Utilisez [enum TransitionType] pour le paramètres [code]trans_type[/code] et "
+"[enum EaseType] pour [code]ease_type[/code]. Ces valeurs contrôlent le "
+"comportement et la direction de l'interpolation. Voir la description de la "
+"classe pour plus d'informations."
 
 #: doc/classes/Tween.xml
 msgid ""
@@ -79252,6 +81230,14 @@ msgid ""
 "direction of the interpolation. See the class description for more "
 "information."
 msgstr ""
+"Suit la propriété [code]property[/code] de [code]object[/code] et applique "
+"la valeur retournée sur la propriété [code]target_property[/code] de "
+"[code]target[/code], en partant de [code]initial_val[/code] pendant "
+"[code]duration[/code] secondes, après [code]delay[/code] secondes.\n"
+"Utilisez [enum TransitionType] pour le paramètres [code]trans_type[/code] et "
+"[enum EaseType] pour [code]ease_type[/code]. Ces valeurs contrôlent le "
+"comportement et la direction de l'interpolation. Voir la description de la "
+"classe pour plus d'informations."
 
 #: doc/classes/Tween.xml
 msgid ""
@@ -79259,6 +81245,10 @@ msgid ""
 "one lasting 10 seconds and the other 20 seconds, it would return 20 seconds, "
 "as by that time all tweens would have finished."
 msgstr ""
+"Retourne le temps total nécessaire pour que tous les tweens finissent. Si "
+"vous avez deux tweens, un de 10 secondes et les 20 autres secondes, il sera "
+"retourné 20 secondes, car c'est la durée nécessaire pour que tous les tweens "
+"se terminent."
 
 #: doc/classes/Tween.xml
 msgid ""
@@ -79277,6 +81267,10 @@ msgid ""
 "[code]arg1[/code]-[code]arg5[/code] are arguments to be passed to the "
 "callback."
 msgstr ""
+"Appelle la méthode [code]callback[/code] de [code]object[/code] après "
+"[code]duration[/code] sur le fil d'exécution principal (similaire à [method "
+"Object.call_deferred]). [code]arg1[/code]-[code]arg5[/code] sont les "
+"arguments à passer lors de l'appel."
 
 #: doc/classes/Tween.xml
 msgid ""
@@ -79289,6 +81283,14 @@ msgid ""
 "direction of the interpolation. See the class description for more "
 "information."
 msgstr ""
+"Anime la méthode [code]method[/code] de [code]object[/code] de "
+"[code]initial_val[/code] jusqu'à [code]final_val[/code] pendant "
+"[code]duration[/code] secondes, après [code]delay[/code] secondes. Les "
+"méthodes sont appelées avec des valeurs consécutives.\n"
+"Utilisez [enum TransitionType] pour le paramètres [code]trans_type[/code] et "
+"[enum EaseType] pour [code]ease_type[/code]. Ces valeurs contrôlent le "
+"comportement et la direction de l'interpolation. Voir la description de la "
+"classe pour plus d'informations."
 
 #: doc/classes/Tween.xml
 msgid ""
@@ -79301,12 +81303,23 @@ msgid ""
 "direction of the interpolation. See the class description for more "
 "information."
 msgstr ""
+"Anime la propriété [code]property[/code] de [code]object[/code] de "
+"[code]initial_val[/code] jusqu'à [code]final_val[/code] pendant "
+"[code]duration[/code] secondes, après [code]delay[/code] secondes. Définir "
+"la valeur initiale à [code]null[/code] utilise l'actuelle valeur de la "
+"propriété.\n"
+"Utilisez [enum TransitionType] pour le paramètres [code]trans_type[/code] et "
+"[enum EaseType] pour [code]ease_type[/code]. Ces valeurs contrôlent le "
+"comportement et la direction de l'interpolation. Voir la description de la "
+"classe pour plus d'informations."
 
 #: doc/classes/Tween.xml
 msgid ""
 "Returns [code]true[/code] if any tweens are currently running.\n"
 "[b]Note:[/b] This method doesn't consider tweens that have ended."
 msgstr ""
+"Retourne [code]true[/code] si des tweens sont en cours d'exécution.\n"
+"[b]Note :[/b] Cette méthode ne tient pas compte des tweens qui sont terminés."
 
 #: doc/classes/Tween.xml
 msgid ""
@@ -79314,6 +81327,9 @@ msgid ""
 "pair. By default, all tweens are removed, unless [code]key[/code] is "
 "specified."
 msgstr ""
+"Arrête l'animation et supprime un tween, compte tenu de son objet et de ses "
+"propriétés/méthodes. Par défaut, tous les tweens sont supprimés, sauf si "
+"[code]key[/code] est spécifié."
 
 #: doc/classes/Tween.xml
 msgid "Stops animation and removes all tweens."
@@ -79325,6 +81341,9 @@ msgid ""
 "tween), given its object and property/method pair. By default, all tweens "
 "are reset, unless [code]key[/code] is specified."
 msgstr ""
+"Réinitialise un tween à sa valeur initiale (celle donnée, pas celle avant le "
+"tween), en donnant son objet et ses propriétés/méthodes. Par défaut, tous "
+"les tweens sont réinitialisés, sauf si [code]key[/code] est spécifié."
 
 #: doc/classes/Tween.xml
 msgid ""
@@ -79340,6 +81359,9 @@ msgid ""
 "pair. By default, all tweens are resumed, unless [code]key[/code] is "
 "specified."
 msgstr ""
+"Continue d'animer un tween arrêté, à partir de son objet et des propriétés/"
+"méthodes. Par défaut, tous les tweens sont repris, sauf si [code]key[/code] "
+"est spécifié."
 
 #: doc/classes/Tween.xml
 msgid "Continues animating all stopped tweens."
@@ -79360,12 +81382,15 @@ msgstr ""
 #: doc/classes/Tween.xml
 msgid "Starts the tween. You can define animations both before and after this."
 msgstr ""
+"Lance le tween. Vous pouvez définir des animations avant et après cela."
 
 #: doc/classes/Tween.xml
 msgid ""
 "Stops a tween, given its object and property/method pair. By default, all "
 "tweens are stopped, unless [code]key[/code] is specified."
 msgstr ""
+"Arrête un tween, à partir de son objet et de ses propriétés/méthodes. Par "
+"défaut, tous les tweens sont arrêtés, sauf si [code]key[/code] est spécifié."
 
 #: doc/classes/Tween.xml
 msgid "Stops animating all tweens."
@@ -79382,6 +81407,15 @@ msgid ""
 "direction of the interpolation. See the class description for more "
 "information."
 msgstr ""
+"Anime la méthode [code]method[/code] de [code]object[/code] et applique la "
+"valeur retournée sur la méthode [code]initial_method[/code] jusqu'à "
+"[code]final_val[/code] pendant [code]duration[/code] secondes, après "
+"[code]delay[/code] secondes. Les méthodes sont animées en les appelant avec "
+"des valeurs consécutives.\n"
+"Utilisez [enum TransitionType] pour le paramètres [code]trans_type[/code] et "
+"[enum EaseType] pour [code]ease_type[/code]. Ces valeurs contrôlent le "
+"comportement et la direction de l'interpolation. Voir la description de la "
+"classe pour plus d'informations."
 
 #: doc/classes/Tween.xml
 msgid ""
@@ -79394,6 +81428,14 @@ msgid ""
 "direction of the interpolation. See the class description for more "
 "information."
 msgstr ""
+"Anime la propriété [code]property[/code] de [code]object[/code] et applique "
+"la valeur retournée par la propriété [code]initial_val[/code] de "
+"[code]initial[/code] jusqu'à [code]final_val[/code] pendant [code]duration[/"
+"code] secondes, après [code]delay[/code] secondes.\n"
+"Utilisez [enum TransitionType] pour le paramètres [code]trans_type[/code] et "
+"[enum EaseType] pour [code]ease_type[/code]. Ces valeurs contrôlent le "
+"comportement et la direction de l'interpolation. Voir la description de la "
+"classe pour plus d'informations."
 
 #: doc/classes/Tween.xml
 msgid "Returns the current time of the tween."
@@ -79411,6 +81453,11 @@ msgid ""
 "code] for half of the normal speed. A value of [code]0[/code] pauses the "
 "animation, but see also [method set_active] or [method stop_all] for this."
 msgstr ""
+"Le multiplicateur de la vitesse du tween. Par exemple, [code]1.0[/code] "
+"définit une vitesse normale, [code]2.0[/code] deux fois que la vitesse "
+"normale, et [code]0.5[/code] la moitié de la vitesse normale. Une valeur de "
+"[code]0[/code] met en pause l'animation, mais voir aussi [method set_active] "
+"ou [method stop_all] pour cela."
 
 #: doc/classes/Tween.xml
 msgid "If [code]true[/code], the tween loops."
@@ -79527,6 +81574,7 @@ msgstr ""
 #: doc/classes/Tweener.xml
 msgid "Abstract class for all Tweeners used by [SceneTreeTween]."
 msgstr ""
+"Une classe abstraite pour tous les Tweener utilisés par [SceneTreeTween]."
 
 #: doc/classes/Tweener.xml
 msgid ""
@@ -79535,6 +81583,10 @@ msgid ""
 "can't be created manually, you need to use a dedicated method from "
 "[SceneTreeTween]."
 msgstr ""
+"Les tweeners sont des objets qui effectuent une tâche d'animation "
+"spécifique, par exemple interpoler une propriété ou appeler une méthode à un "
+"moment donné. Un [Tweener] ne peut pas être créé manuellement, vous devez "
+"utiliser une méthode dédiée de [SceneTreeTween]."
 
 #: doc/classes/Tweener.xml
 msgid "Emitted when the [Tweener] has just finished its job."
@@ -79675,6 +81727,10 @@ msgid ""
 "can optionally specify a [code]bind_address[/code] to only listen for "
 "packets sent to that address. See also [method PacketPeerUDP.listen]."
 msgstr ""
+"Démarre le serveur en ouvrant un socket UDP écoutant du port donné. Vous "
+"pouvez en option spécifier une [code]bind_address[/code] pour seulement "
+"écouter les paquets envoyés à cette adresse. Voir aussi [method "
+"PacketPeerUDP.listen]."
 
 #: doc/classes/UDPServer.xml
 msgid ""
@@ -79795,6 +81851,7 @@ msgstr ""
 #: doc/classes/UndoRedo.xml
 msgid "Register a method that will be called when the action is committed."
 msgstr ""
+"Enregistre une méthode qui sera appelée lorsque l'action sera exécutée."
 
 #: doc/classes/UndoRedo.xml
 msgid "Register a property value change for \"do\"."
@@ -79806,6 +81863,9 @@ msgid ""
 "lost. This is useful mostly for new nodes created for the \"do\" call. Do "
 "not use for resources."
 msgstr ""
+"Enregistre une référence pour \"faire\" qui sera effacée si l'historique de "
+"\"faire\" est perdue. Ceci est utile surtout pour les nouveaux nœuds créés "
+"avec l'appel \"faire\". Ne pas l'utiliser pour les ressources."
 
 #: doc/classes/UndoRedo.xml
 msgid "Register a method that will be called when the action is undone."
@@ -79821,6 +81881,9 @@ msgid ""
 "history is lost. This is useful mostly for nodes removed with the \"do\" "
 "call (not the \"undo\" call!)."
 msgstr ""
+"Enregistre une référence pour \"annuler\" qui sera effacée si l'historique "
+"\"annuler\" est perdue. Ceci est utile surtout pour les nœuds retirés avec "
+"l'appel \"faire\" (et non pas l'appel \"annuler\" !)."
 
 #: doc/classes/UndoRedo.xml
 msgid ""
@@ -79828,12 +81891,17 @@ msgid ""
 "Passing [code]false[/code] to [code]increase_version[/code] will prevent the "
 "version number to be increased from this."
 msgstr ""
+"Efface l'historique annuler/refaire et les références associées.\n"
+"Passez [code]false[/code] pour [code]increase_version[/code] pour empêcher "
+"le numéro de version d'être augmenté suite à ça."
 
 #: doc/classes/UndoRedo.xml
 msgid ""
 "Commit the action. All \"do\" methods/properties are called/set when this "
 "function is called."
 msgstr ""
+"Exécute l'action. Toutes les méthodes et propriétés \"faire\" sont appelées/"
+"définies lorsque cette fonction est appelée."
 
 #: doc/classes/UndoRedo.xml
 msgid ""
@@ -79844,6 +81912,12 @@ msgid ""
 "The way actions are merged is dictated by the [code]merge_mode[/code] "
 "argument. See [enum MergeMode] for details."
 msgstr ""
+"Crée une nouvelle action. Une fois appelé, faites tous vos appels avec "
+"[method add_do_method], [method add_undo_method], [method add_do_property], "
+"et [method add_undo_property], puis exécutez l'action avec [method "
+"commit_action].\n"
+"La façon dont les actions sont fusionnées est défini par l'argument "
+"[code]merge_mode[/code]. Voir [enum MergeMode] pour plus de détails."
 
 #: doc/classes/UndoRedo.xml
 msgid "Gets the name of the current action."
@@ -79855,6 +81929,10 @@ msgid ""
 "version number is increased automatically.\n"
 "This is useful mostly to check if something changed from a saved version."
 msgstr ""
+"Retourne la version. Chaque fois qu'une nouvelle action est engagée, le "
+"numéro de version du [UndoRedo] est augmenté automatiquement.\n"
+"Ceci est surtout utile pour vérifier si quelque chose a changé par rapport à "
+"une version sauvegardée."
 
 #: doc/classes/UndoRedo.xml
 msgid ""
@@ -79862,6 +81940,9 @@ msgid ""
 "action, i.e. running its \"do\" method or property change (see [method "
 "commit_action])."
 msgstr ""
+"Retourne [code]true[/code] si le [UndoRedo] engage actuellement l'action, "
+"c'est-à-dire en exécutant sa méthode « faire » ou son changement de "
+"propriété (voir [method commit_action])."
 
 #: doc/classes/UndoRedo.xml
 msgid "Redo the last action."
@@ -79887,27 +81968,34 @@ msgid ""
 "and the \"undo\" operation is from the last subsequent action with the same "
 "name."
 msgstr ""
+"Fait de sorte que l'opération action suivante \"faire\" est de la première "
+"action créée, et que l'opération \"annuler\" est de l'action suivante avec "
+"le même nom."
 
 #: doc/classes/UndoRedo.xml
 msgid "Makes subsequent actions with the same name be merged into one."
 msgstr "Fusionne les actions suivantes avec le même nom dans une seule."
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
-msgstr "Les fonctions de réseau UPNP."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -79920,7 +82008,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -79949,62 +82037,40 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
-msgstr ""
-"Fournis un fonctionnalité UPNP pour découvrir des appareils [UPNPDevice] sur "
-"le réseau local et lancer des commandes sur eux, comme la gestion des ports "
-"(port forwarding) et requêter les adresses IP locales et distantes. À noter "
-"que les méthodes de cette classe sont synchrones et bloquent le fil "
-"d'exécution que les appelle.\n"
-"Pour le forward d'un port :\n"
-"[codeblock]\n"
-"const PORT = 7777\n"
-"var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
-"[/codeblock]\n"
-"Pour fermer le port spécifié (ex. après avoir fini de l'utiliser) :\n"
-"[codeblock]\n"
-"upnp.delete_port_mapping(port)\n"
 "[/codeblock]\n"
-"[b]Note :[/b] la découverte UPnP bloque le fil d'exécution que l'appelle. "
-"Pour ne pas bloquer le fil d'exécution principal, utilisez les [Thread] "
-"comme ceci :\n"
-"[codeblock]\n"
-"# Émis quand la configuration d'un port UPnP est fini (peu importe si c'est "
-"un succès ou un échec).\n"
-"signal upnp_completed(error)\n"
-"\n"
-"# Remplacer ceci avec le port de votre serveur compris entre 1025 et 65535.\n"
-"const SERVER_PORT = 3928\n"
-"var thread = null\n"
-"\n"
-"func _upnp_setup(server_port):\n"
-"    # Les requêtes UPNP prennent un peu de temps\n"
-"    var upnp = UPNP.new()\n"
-"    var err = upnp.discover()\n"
-"\n"
-"    if err != OK:\n"
-"        push_error(str(err))\n"
-"        emit_signal(\"upnp_completed\", err)\n"
-"        return\n"
-"\n"
-"    if upnp.get_gateway() and upnp.get_gateway().is_valid_gateway():\n"
-"        upnp.add_port_mapping(server_port, server_port, ProjectSettings."
-"get_setting(\"application/config/name\"), \"UDP\")\n"
-"        upnp.add_port_mapping(server_port, server_port, ProjectSettings."
-"get_setting(\"application/config/name\"), \"TCP\")\n"
-"        emit_signal(\"upnp_completed\", OK)\n"
-"\n"
-"func _ready():\n"
-"    thread = Thread.new()\n"
-"    thread.start(self, \"_upnp_setup\", SERVER_PORT)\n"
-"\n"
-"func _exit_tree():\n"
-"    # Attendre ici que le fil d'exécution se termine avant que le jeu ne "
-"quitte.\n"
-"    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "Adds the given [UPNPDevice] to the list of discovered devices."
@@ -80013,22 +82079,35 @@ msgstr "Ajouter le [UPNPDevice] spécifié à la liste des appareils découverts
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -80041,8 +82120,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -80055,6 +82136,13 @@ msgid ""
 "this if you know what you're doing.\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
+"Découvre les [UPNPDevice] locaux. Efface la liste des appareils précédemment "
+"découverts.\n"
+"Filtres pour les appareils de type IGD (InternetGatewayDevice) par défaut, "
+"comme ceux gèrent le suivi de port. [code]timeout[/code] est la durée "
+"d'attente des réponses en millisecondes. [code]ttl[/code] est le temps "
+"laissé à vivre; changez-le seulement si vous savez ce que vous faites.\n"
+"Voir [enum UPNPResult] pour les valeurs retournées possibles."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "Returns the [UPNPDevice] at the given [code]index[/code]."
@@ -80070,12 +82158,16 @@ msgid ""
 "Returns the default gateway. That is the first discovered [UPNPDevice] that "
 "is also a valid IGD (InternetGatewayDevice)."
 msgstr ""
+"Retourne la passerelle par défaut. Il s'agit du premier [UPNPDevice] "
+"découvert qui est également un IGD (InternetGatewayDevice) valide."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Returns the external [IP] address of the default gateway (see [method "
 "get_gateway]) as string. Returns an empty string on error."
 msgstr ""
+"Retourne l'adresse [IP] externe de la passerelle par défaut (voir [method "
+"get_gateway]) en tant que chaîne. Retourne une chaîne vide en cas d'erreur."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
@@ -80104,12 +82196,18 @@ msgid ""
 "the source port 1900 (same as destination port). Otherwise, the value will "
 "be used as the port."
 msgstr ""
+"Si [code]0[/code], le port local à utiliser pour la découverte est choisi "
+"automatiquement par le système. Si [code]1[/code], la découverte sera faite "
+"à partir du port source 1900 (même comme port de destination.) Sinon, la "
+"valeur sera utilisée comme port."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Multicast interface to use for discovery. Uses the default multicast "
 "interface if empty."
 msgstr ""
+"L'interface multicast à utiliser pour la découverte. Utilise l'interface "
+"multicast par défaut si vide."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "UPNP command or discovery was successful."
@@ -80120,12 +82218,16 @@ msgid ""
 "Not authorized to use the command on the [UPNPDevice]. May be returned when "
 "the user disabled UPNP on their router."
 msgstr ""
+"Non autorisé à utiliser la commande sur le [UPNPDevice]. Peut être retourné "
+"lorsque l'utilisateur a désactivé UPNP sur son routeur."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "No port mapping was found for the given port, protocol combination on the "
 "given [UPNPDevice]."
 msgstr ""
+"Aucune carte des ports n'a été trouvée pour le port donné, la combinaison de "
+"protocole sur le [UPNPDevice] donné."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "Inconsistent parameters."
@@ -80136,6 +82238,8 @@ msgid ""
 "No such entry in array. May be returned if a given port, protocol "
 "combination is not found on an [UPNPDevice]."
 msgstr ""
+"Pas d'entrée dans le tableau. Peut être retourné si pour un port donné, la "
+"combinaison de protocole n'est pas trouvée sur un [UPNPDevice]."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "The action failed."
@@ -80145,6 +82249,7 @@ msgstr "L’action a échoué."
 msgid ""
 "The [UPNPDevice] does not allow wildcard values for the source IP address."
 msgstr ""
+"Le [UPNPDevice] ne permet pas les valeurs joker pour l'adresse IP source."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "The [UPNPDevice] does not allow wildcard values for the external port."
@@ -80169,6 +82274,8 @@ msgid ""
 "No port maps are available. May also be returned if port mapping "
 "functionality is not available."
 msgstr ""
+"Aucune carte de ports n'est disponible. Peut également être retourné si la "
+"fonctionnalité de carte des ports n'est pas disponible."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
@@ -80176,10 +82283,13 @@ msgid ""
 "UPNP_RESULT_CONFLICT_WITH_OTHER_MAPPING] if a port mapping conflicts with an "
 "existing one."
 msgstr ""
+"Est en conflit avec un autre mécanisme. Peut être retourné au lieu de "
+"[constant UPNP_RESULT_CONFLICT_WITH_OTHER_MAPPING] si une carte des ports "
+"est en conflit avec une carte existante."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "Conflict with an existing port mapping."
-msgstr ""
+msgstr "Est en conflit avec une carte des ports existante."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "External and internal port values must be the same."
@@ -80190,6 +82300,8 @@ msgid ""
 "Only permanent leases are supported. Do not use the [code]duration[/code] "
 "parameter when adding port mappings."
 msgstr ""
+"Seuls les baux permanents sont pris en charge. N'utilisez pas le paramètre "
+"[code]duration[/code] lors de l'ajout de carte des ports."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "Invalid gateway."
@@ -80236,29 +82348,41 @@ msgid ""
 "No gateway available. You may need to call [method discover] first, or "
 "discovery didn't detect any valid IGDs (InternetGatewayDevices)."
 msgstr ""
+"Aucune passerelle disponible. Vous pouvez avoir besoin d'appeler [method "
+"discover] d'abord, ou la découverte n'a pas détecté de IGD "
+"(InternetGatewayDevices) valide."
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "No devices available. You may need to call [method discover] first, or "
 "discovery didn't detect any valid [UPNPDevice]s."
 msgstr ""
+"Aucun appareil disponible. Vous pouvez avoir besoin d'appeler [method "
+"discover] d'abord, ou la découverte n'a pas détecté des [UPNPDevice] valides."
 
 #: modules/upnp/doc_classes/UPNP.xml modules/upnp/doc_classes/UPNPDevice.xml
 msgid "Unknown error."
 msgstr "Erreur inconnue."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
-msgstr "Périphérique UPNP."
+msgid "Universal Plug and Play (UPnP) device."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
+#, fuzzy
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
+"Un appareil UPNP. Voir [UPNP] pour les fonctions UPNP de découverte et "
+"utilitaires. Fournit un accès de bas niveau aux commandes UPNP. Permet de "
+"gérer les cartes de ports (suivi de port) et de demander des informations "
+"réseau sur l'appareil (comme l'adresse IP locale et externe, et le statut). "
+"Notez que les méthodes de cette classe sont synchrones et bloquent le fil "
+"d'exécution dans lequel ces méthodes sont appelées."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
@@ -80266,30 +82390,36 @@ msgid ""
 "for the given protocol to the local machine. See [method UPNP."
 "add_port_mapping]."
 msgstr ""
+"Ajoute une carte des ports pour faire passer le port externe donné sur ce "
+"[UPNPDevice] pour le protocole donné à la machine locale. Voir [method UPNP."
+"add_port_mapping]."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
 "Deletes the port mapping identified by the given port and protocol "
 "combination on this device. See [method UPNP.delete_port_mapping]."
 msgstr ""
+"Supprime la carte des ports identifiée par la combinaison de ports et le "
+"protocole donnée sur cet appareil. Voir [method UPNP.delete_port_mapping]."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
 "Returns [code]true[/code] if this is a valid IGD (InternetGatewayDevice) "
 "which potentially supports port forwarding."
 msgstr ""
+"Retourne [code]true[/code] si c'est un IGD (InternetGatewayDevice) valide "
+"qui supporte potentiellement le suivi de port."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
 "Returns the external IP address of this [UPNPDevice] or an empty string."
-msgstr ""
+msgstr "Retourne l'adresse IP externe de ce [UPNPDevice], ou une chaîne vide."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid "URL to the device description."
 msgstr "URL de la description de l’appareil."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-#, fuzzy
 msgid "IDG control URL."
 msgstr "URL de contrôle IDG."
 
@@ -80475,6 +82605,8 @@ msgstr ""
 msgid ""
 "Returns a new vector with all components in absolute values (i.e. positive)."
 msgstr ""
+"Retourne un nouveau vecteur avec tous les composants en valeurs absolues "
+"(c'est-à-dire toujours positif)."
 
 #: doc/classes/Vector2.xml
 msgid ""
@@ -80496,6 +82628,9 @@ msgid ""
 "[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
 "vector2_angle_to.png]Illustration of the returned angle.[/url]"
 msgstr ""
+"Retourne l'angle au vecteur donné, en radians.\n"
+"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
+"vector2_angle_to.png]Illustration de l'angle retourné.[/url]"
 
 #: doc/classes/Vector2.xml
 msgid ""
@@ -80504,6 +82639,10 @@ msgid ""
 "[url=https://raw.githubusercontent.com/godotengine/godot-docs/stable/img/"
 "vector2_angle_to_point.png]Illustration of the returned angle.[/url]"
 msgstr ""
+"Retourne l'angle entre la ligne reliant les deux points et l'axe X, en "
+"radians.\n"
+"[url=https://raw.githubusercontent.com/godotengine/godot-docs/stable/img/"
+"vector2_angle_to_point.png]Illustration de l'angle retourné.[/url]"
 
 #: doc/classes/Vector2.xml
 msgid ""
@@ -80524,6 +82663,7 @@ msgid ""
 "Returns a new vector with all components rounded up (towards positive "
 "infinity)."
 msgstr ""
+"Retourne un nouveau vecteur avec tous les composants arrondis (vers +infini)."
 
 #: doc/classes/Vector2.xml
 msgid ""
@@ -80555,12 +82695,18 @@ msgid ""
 "result at position [code]weight[/code]. [code]weight[/code] is on the range "
 "of 0.0 to 1.0, representing the amount of interpolation."
 msgstr ""
+"Fait une interpolation cubique entre ce vecteur et [code]b[/code] en "
+"utilisant [code]pre_a[/code] et [code]post_b[/code] comme poignées, et "
+"retourne le résultat suivant [code]weight[/code]. [code]weight[/code] est "
+"dans l'intervalle de 0,0 à 1,0, représentant la quantité interpolée."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
 "Returns the normalized vector pointing from this vector to [code]b[/code]. "
 "This is equivalent to using [code](b - a).normalized()[/code]."
 msgstr ""
+"Retourne le vecteur normalisé de ce vecteur en direction de [code]b[/code]. "
+"Ceci est équivalent à l'utilisation [code]b - a).normalized()[/code]."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -80568,6 +82714,10 @@ msgid ""
 "This method runs faster than [method distance_to], so prefer it if you need "
 "to compare vectors or need the squared distance for some formula."
 msgstr ""
+"Retourne la distance entre ce vecteur et [code]b[/code].\n"
+"Cette méthode est plus rapide que [method distance_to], alors préfèrez-le si "
+"vous avez besoin de comparer des vecteurs ou besoin de la distance carrée "
+"pour une formule."
 
 #: doc/classes/Vector2.xml
 msgid "Returns the distance between this vector and [code]to[/code]."
@@ -80593,6 +82743,8 @@ msgid ""
 "Returns a new vector with all components rounded down (towards negative "
 "infinity)."
 msgstr ""
+"Retourne un nouveau vecteur avec tous les composants arrondis à la valeur "
+"inférieur (vers -infini)."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -80622,6 +82774,10 @@ msgid ""
 "This method runs faster than [method length], so prefer it if you need to "
 "compare vectors or need the squared distance for some formula."
 msgstr ""
+"Retourne la longeur (magnitude) au carré de ce vecteur.\n"
+"Cette méthode est plus rapide que [method length] donc préférez-le si vous "
+"devez comparer des vecteurs ou avoir besoin de la distance carrée pour "
+"certaines formules."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -80637,6 +82793,9 @@ msgid ""
 "[code]to[/code] by amount [code]weight[/code]. [code]weight[/code] is on the "
 "range of 0.0 to 1.0, representing the amount of interpolation."
 msgstr ""
+"Retourne le résultat de l'interpolation linéaire entre ce vecteur et "
+"[code]to[/code] par la quantité [code]weight[/code]. [code]weight[/code] est "
+"compris entre 0,0 et 1,0, représentant la quantité d'interpolation."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -80651,18 +82810,24 @@ msgid ""
 "Returns the vector scaled to unit length. Equivalent to [code]v / v.length()"
 "[/code]."
 msgstr ""
+"Retourne le vecteur de longueur unitaire. Équivalent à [code]v / v.length()[/"
+"code]."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
 "Returns a vector composed of the [method @GDScript.fposmod] of this vector's "
 "components and [code]mod[/code]."
 msgstr ""
+"Retourne un vecteur composé de [method @GDScript.fposmod] de ces composants "
+"vectoriels et [code]mod[/code]."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
 "Returns a vector composed of the [method @GDScript.fposmod] of this vector's "
 "components and [code]modv[/code]'s components."
 msgstr ""
+"Retourne un vecteur composé de [method @GDScript.fposmod] de ces composants "
+"vectoriels et [code]modv[/code])."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid "Returns this vector projected onto the vector [code]b[/code]."
@@ -80673,14 +82838,16 @@ msgid ""
 "Returns the vector reflected (i.e. mirrored, or symmetric) over a line "
 "defined by the given direction vector [code]n[/code]."
 msgstr ""
+"Retourne le vecteur réfléchi (c'est-à-dire en miroir ou symétrique) sur une "
+"ligne définie par le vecteur de direction [code]n[/code] spécifié."
 
 #: doc/classes/Vector2.xml
 msgid ""
 "Returns the vector rotated by [code]angle[/code] (in radians). See also "
 "[method @GDScript.deg2rad]."
 msgstr ""
-"Retourne le vecteur pivoté par [code]angle[/code] (en radians). Voir aussi ["
-"method @GDScript.deg2rad]."
+"Retourne le vecteur pivoté par [code]angle[/code] (en radians). Voir aussi "
+"[method @GDScript.deg2rad]."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -80696,6 +82863,9 @@ msgid ""
 "depending on the signs of the components. If a component is zero, it returns "
 "positive one."
 msgstr ""
+"Retourne un nouveau vecteur avec chaque composant défini à 1 ou -1, selon "
+"les signes des composants. Si un composant est zéro, la valeur retournée "
+"sera positive."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -80704,10 +82874,16 @@ msgid ""
 "the range of 0.0 to 1.0, representing the amount of interpolation.\n"
 "[b]Note:[/b] Both vectors must be normalized."
 msgstr ""
+"Retourne le résultat de l'interpolation linéaire sphérique entre ce vecteur "
+"et [code]to[/code], par la quantité [code]weight[/code]. [code]weight[/code] "
+"est compris entre 0,0 et 1,0, représentant la quantité d'interpolation.\n"
+"[b]Note :[/b] Les deux vecteurs doivent être normalisés."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid "Returns this vector slid along a plane defined by the given normal."
 msgstr ""
+"Retourne ce vecteur ayant glissé le long du plan défini par la normale "
+"donnée."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -80715,6 +82891,9 @@ msgid ""
 "[code]step[/code]. This can also be used to round to an arbitrary number of "
 "decimals."
 msgstr ""
+"Retourne ce vecteur avec chaque composant arrondis au multiple le plus "
+"proche de [code]step[/code]. Cela peut également être utilisé pour arrondir "
+"à un nombre arbitraire de décimales."
 
 #: doc/classes/Vector2.xml
 msgid ""
@@ -80729,12 +82908,16 @@ msgid ""
 "The vector's X component. Also accessible by using the index position [code]"
 "[0][/code]."
 msgstr ""
+"La composante vectorielle X. Également accessible en utilisant le code de "
+"position index [code][0][/code]."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
 "The vector's Y component. Also accessible by using the index position [code]"
 "[1][/code]."
 msgstr ""
+"La composante vectorielle X. Également accessible en utilisant le code de "
+"position index [code][1][/code]."
 
 #: doc/classes/Vector2.xml
 msgid "Enumerated value for the X axis."
@@ -80747,10 +82930,13 @@ msgstr "Les valeurs énumérées pour l'axe Y."
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid "Zero vector, a vector with all components set to [code]0[/code]."
 msgstr ""
+"Le vecteur zéro, un vecteur avec tous ses composants définis [code]0[/code]."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid "One vector, a vector with all components set to [code]1[/code]."
 msgstr ""
+"Le vecteur unitaire, un vecteur avec tous ses composants définis à [code]1[/"
+"code]."
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -80792,6 +82978,11 @@ msgid ""
 "code] if it's equal to [code]Vector3(0, 0, 0)[/code]. Otherwise, a Vector3 "
 "will always evaluate to [code]true[/code]."
 msgstr ""
+"Une structure de 3 éléments qui peut être utilisée pour représenter des "
+"positions dans l'espace 3D ou tout autre trio de valeurs numériques.\n"
+"[b]Note :[/b] Avec des booléens, un Vector3 sera évalué ) [code]false[/code] "
+"s'il est égal à [code]Vector3(0, 0, 0)[/code]. Sinon, un Vector3 sera "
+"toujours évalué à [code]true[/code]."
 
 #: doc/classes/Vector3.xml
 msgid "Returns a Vector3 with the given components."
@@ -80812,6 +83003,10 @@ msgid ""
 "result at position [code]weight[/code]. [code]weight[/code] is on the range "
 "of 0.0 to 1.0, representing the amount of interpolation."
 msgstr ""
+"Exécute une interpolation cubique entre ce vecteur et [code]b[/code] en "
+"utilisant [code]pre_a[/code] et [code]post_b[/code] comme poignées, et "
+"retourne le résultat à la position [code]weight[/code]. [code]weight[/code] "
+"est dans l'intervalle de 0,0 à 1,0, représentant la quantité d'interpolation."
 
 #: doc/classes/Vector3.xml
 msgid "Returns the distance between this vector and [code]b[/code]."
@@ -80846,6 +83041,9 @@ msgid ""
 "[code]to[/code] by amount [code]t[/code]. [code]weight[/code] is on the "
 "range of 0.0 to 1.0, representing the amount of interpolation."
 msgstr ""
+"Retourne le résultat de l'interpolation linéaire entre ce vecteur et "
+"[code]to[/code] par la quantité [code]t[/code]. [code]weight[/code] est dans "
+"l'intervalle 0,0 à 1,0, représentant la quantité d'interpolée."
 
 #: doc/classes/Vector3.xml
 msgid ""
@@ -80853,6 +83051,9 @@ msgid ""
 "constants. If all components are equal, this method returns [constant "
 "AXIS_X]."
 msgstr ""
+"Retourne l'axe de la valeur la plus importante du vecteur. Voir les "
+"constantes[code]AXIS_*[/code]. Si tous les composants sont égaux, cette "
+"méthode retourne [constant AXIS_X]."
 
 #: doc/classes/Vector3.xml
 msgid ""
@@ -80860,6 +83061,9 @@ msgid ""
 "constants. If all components are equal, this method returns [constant "
 "AXIS_Z]."
 msgstr ""
+"Retourne l'axe de la valeur vectorielle la plus petite. Voir les constantes "
+"[code]AXIS_*[/code]. Si tous les composants sont égaux, cette méthode "
+"retourne [constant AXIS_Z]."
 
 #: doc/classes/Vector3.xml
 msgid "Returns the outer product with [code]b[/code]."
@@ -80867,7 +83071,7 @@ msgstr ""
 
 #: doc/classes/Vector3.xml
 msgid "Returns this vector reflected from a plane defined by the given normal."
-msgstr ""
+msgstr "Retourne ce vecteur réfléchi par un plan défini par la normale donnée."
 
 #: doc/classes/Vector3.xml
 msgid ""
@@ -80884,6 +83088,9 @@ msgid ""
 "clockwise direction when viewed from the side specified by the [code]axis[/"
 "code]."
 msgstr ""
+"Retourne l'angle signé du vecteur donné, en radians. Le signe de l'angle est "
+"positif dans une direction horaire inversée et négatif dans l'autre "
+"direction lorsqu'il est vu du côté spécifié par le [code]axis[/code]."
 
 #: doc/classes/Vector3.xml
 msgid ""
@@ -80891,12 +83098,17 @@ msgid ""
 "This is equivalent to a Basis with no rotation or shearing and this vector's "
 "components set as the scale."
 msgstr ""
+"Retourne une matrice diagonale avec ce vecteur comme diagonale principale.\n"
+"Il s'agit d'une Basis qui n'a ni rotation ni déformation, et les composants "
+"de ce vecteur représentent l'échelle."
 
 #: doc/classes/Vector3.xml
 msgid ""
 "The vector's Z component. Also accessible by using the index position [code]"
 "[2][/code]."
 msgstr ""
+"Le composant vectoriel Z. Également accessible en utilisant l'index [code][2]"
+"[/code]."
 
 #: doc/classes/Vector3.xml
 msgid ""
@@ -81097,6 +83309,8 @@ msgid ""
 "The steering angle for the wheel. Setting this to a non-zero value will "
 "result in the vehicle turning when it's moving."
 msgstr ""
+"L'angle de direction du volant pour la roue. Définit de cette valeur à une "
+"valeur non nulle fera tourner le véhicule quand il se déplace."
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
@@ -81105,6 +83319,10 @@ msgid ""
 "will not carry the weight of the vehicle. Good results are often obtained by "
 "a value that is about 3× to 4× this number."
 msgstr ""
+"La force maximale que le ressort peut résister. Cette valeur devrait être "
+"supérieure à un quart du [member RigidBody.mass] du [VehicleBody] ou alors "
+"le ressort ne portera pas le poids du véhicule. Les bons résultats sont "
+"souvent obtenus par une valeur d'environ 3× à 4× ce nombre."
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
@@ -81112,6 +83330,10 @@ msgid ""
 "50 for an off-road car, a value between 50 and 100 for a race car and try "
 "something around 200 for something like a Formula 1 car."
 msgstr ""
+"Cette valeur définit la rigidité de la suspension. Utilisez une valeur "
+"inférieure à 50 pour une voiture tout terrain, une valeur entre 50 et 100 "
+"pour une voiture de course et essayez quelque chose autour de 200 pour "
+"quelque chose comme une voiture de Formule 1."
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
@@ -81119,6 +83341,9 @@ msgid ""
 "equivalent to meters, keep this setting relatively low. Try a value between "
 "0.1 and 0.3 depending on the type of car."
 msgstr ""
+"C'est la distance que la suspension peut parcourir. Comme les unités Godot "
+"sont équivalentes aux mètres, garder ce réglage relativement bas. Essayez "
+"une valeur entre 0,1 et 0,3 selon le type de voiture."
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
@@ -81126,6 +83351,9 @@ msgid ""
 "value is used in conjunction with [member VehicleBody.steering] and ignored "
 "if you are using the per-wheel [member steering] value instead."
 msgstr ""
+"Si [code]true[/code], cette roue sera tournée lorsque la voiture tourne. "
+"Cette valeur est utilisée en conjonction avec [member VehicleBody.steering] "
+"et ignorée si vous utilisez plutôt la valeur [member steering] par roue."
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
@@ -81134,6 +83362,10 @@ msgid ""
 "VehicleBody.engine_force] and ignored if you are using the per-wheel [member "
 "engine_force] value instead."
 msgstr ""
+"Si [code]true[/code], cette roue transfère la force moteur au sol pour "
+"propulser le véhicule vers l'avant. Cette valeur est utilisée en conjonction "
+"avec [member VehicleBody.engine_force] et ignorée si vous utilisez plutôt la "
+"valeur par roue [member engine_force]."
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
@@ -81164,6 +83396,9 @@ msgid ""
 "your vehicle will be prone to rolling over, while a value of 0.0 will resist "
 "body roll."
 msgstr ""
+"Cette valeur affecte le roulade de votre véhicule. Si définit à 1.0 pour "
+"toutes les roues, votre véhicule sera sujet aux roulades, tandis qu'une "
+"valeur de 0.0 résistera au roulade du corps."
 
 #: doc/classes/VFlowContainer.xml
 msgid "Vertical flow container."
@@ -81195,6 +83430,8 @@ msgid ""
 "Returns the video stream's name, or [code]\"<No Stream>\"[/code] if no video "
 "stream is assigned."
 msgstr ""
+"Retourne le nom du flux vidéo, ou [code]\"<No Stream>\"[/code] si aucun flux "
+"vidéo n'est assigné."
 
 #: doc/classes/VideoPlayer.xml
 msgid "Returns the current frame as a [Texture]."
@@ -81205,12 +83442,17 @@ msgid ""
 "Returns [code]true[/code] if the video is playing.\n"
 "[b]Note:[/b] The video is still considered playing if paused during playback."
 msgstr ""
+"Retourne [code]true[/code] si la vidéo joue.\n"
+"[b]Note :[/b] La vidéo est toujours considérée comme en train de jouer si "
+"elle est mise en pause pendant la lecture."
 
 #: doc/classes/VideoPlayer.xml
 msgid ""
 "Starts the video playback from the beginning. If the video is paused, this "
 "will not unpause the video."
 msgstr ""
+"Commence la lecture vidéo dès le début. Si la vidéo est en pause, cela ne la "
+"fera pas reprendre."
 
 #: doc/classes/VideoPlayer.xml
 msgid ""
@@ -81218,6 +83460,9 @@ msgid ""
 "[b]Note:[/b] Although the stream position will be set to 0, the first frame "
 "of the video stream won't become the current frame."
 msgstr ""
+"Arrête la lecture vidéo et fixe la position du flux à 0.\n"
+"[b]Note :[/b] Bien que la position du flux soit définie à 0, la première "
+"trame du flux vidéo ne deviendra pas le trame actuel."
 
 #: doc/classes/VideoPlayer.xml
 msgid "The embedded audio track to play."
@@ -81242,6 +83487,9 @@ msgid ""
 "control minimum size will be automatically adjusted to match the video "
 "stream's dimensions."
 msgstr ""
+"Si [code]true[/code], la taille des contrôles dépendront de la vidéo. Sinon, "
+"la taille minimale des contrôles sera automatiquement ajustée pour "
+"correspondre aux dimensions du flux vidéo."
 
 #: doc/classes/VideoPlayer.xml
 msgid "If [code]true[/code], the video is paused."
@@ -81257,6 +83505,10 @@ msgid ""
 "[b]Note:[/b] Changing this value won't have any effect as seeking is not "
 "implemented yet, except in video formats implemented by a GDNative add-on."
 msgstr ""
+"La position actuelle du flux, en secondes.\n"
+"[b]Note :[/b] La modification de cette valeur n'a pas d'effet puisque le "
+"progression de lecture n'est pas encore implémentée, sauf dans les formats "
+"vidéo implémentés par un greffon GDNative."
 
 #: doc/classes/VideoPlayer.xml
 msgid "Audio volume as a linear value."
@@ -81280,6 +83532,9 @@ msgid ""
 "[VideoStream] can all be used as resource types to play back videos in "
 "[VideoPlayer]."
 msgstr ""
+"Le type de ressources de base pour tous les flux vidéos. Les classes qui "
+"dérivent de [VideoStream] peuvent tous être utilisées comme types de "
+"ressources pour lire des vidéos dans [VideoPlayer]."
 
 #: modules/gdnative/doc_classes/VideoStreamGDNative.xml
 msgid "[VideoStream] resource for video formats implemented via GDNative."
@@ -81293,6 +83548,10 @@ msgid ""
 "videodecoder]godot-videodecoder[/url] which uses the [url=https://ffmpeg."
 "org]FFmpeg[/url] library."
 msgstr ""
+"La ressource [VideoStream] pour les formats vidéo implémenté avec GDNative.\n"
+"Il peut être utilisé via [url=https://github.com/KidRigger/godot-"
+"videodecoder]godot-videodecoder[/url] utilisé par la bibliothèque "
+"[url=https://ffmpeg.org]FFmpeg[/url]."
 
 #: modules/gdnative/doc_classes/VideoStreamGDNative.xml
 msgid "Returns the video file handled by this [VideoStreamGDNative]."
@@ -81305,6 +83564,9 @@ msgid ""
 "supported extensions depend on the GDNative plugins used to expose video "
 "formats."
 msgstr ""
+"Définit le fichier vidéo que cette ressource [VideoStreamGDNative] gère. Les "
+"extensions supportées dépendent des greffons GDNative utilisés pour exposer "
+"les formats vidéo."
 
 #: modules/theora/doc_classes/VideoStreamTheora.xml
 msgid "[VideoStream] resource for Ogg Theora videos."
@@ -81363,6 +83625,9 @@ msgid ""
 "Sets the WebM video file that this [VideoStreamWebm] resource handles. The "
 "[code]file[/code] name should have the [code].webm[/code] extension."
 msgstr ""
+"Définit le fichier vidéo WebM que cette ressource [VideoStreamWebm] gère. Le "
+"nom de fichier [code]file[/code] devrait avoir l'extension [code].webm[/"
+"code]."
 
 #: doc/classes/Viewport.xml
 msgid "Creates a sub-view into the screen."
@@ -81441,6 +83706,8 @@ msgid ""
 "Returns the mouse's position in this [Viewport] using the coordinate system "
 "of this [Viewport]."
 msgstr ""
+"Retourne la position de la souris dans ce [Viewport] en utilisant le système "
+"de coordonnées de ce [Viewport]."
 
 #: doc/classes/Viewport.xml
 msgid "Returns information about the viewport from the rendering pipeline."
@@ -81453,6 +83720,7 @@ msgstr ""
 #: doc/classes/Viewport.xml
 msgid "Returns the size override set with [method set_size_override]."
 msgstr ""
+"Retourne la surcharge de taille définit avec [method set_size_override]."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81465,6 +83733,15 @@ msgid ""
 "img.flip_y()\n"
 "[/codeblock]"
 msgstr ""
+"Retourne la texture de la fenêtre d'affichage.\n"
+"[b]Note :[/b] En raison de la façon dont OpenGL fonctionne, la "
+"[ViewportTexture] finale est à l'envers verticalement. Vous pouvez utiliser "
+"[method Image.flip_y] sur l'image de [method Texture.get_data] pour la "
+"retourner, par exemple :\n"
+"[codeblock]\n"
+"var img = get_viewport().get_texture().get_data()\n"
+"img.flip_y()\n"
+"/[codeblock]"
 
 #: doc/classes/Viewport.xml
 msgid "Returns the viewport's RID from the [VisualServer]."
@@ -81480,10 +83757,12 @@ msgid ""
 "Returns the drag data from the GUI, that was previously returned by [method "
 "Control.get_drag_data]."
 msgstr ""
+"Retourne les données de déposé-glissé de l'interface graphique, qui a été "
+"précédemment retourné par [method Control.get_drag_data]."
 
 #: doc/classes/Viewport.xml
 msgid "Returns [code]true[/code] if there are visible modals on-screen."
-msgstr ""
+msgstr "Retourne [code]true[/code] s'il y a des modales visibles à l'écran."
 
 #: doc/classes/Viewport.xml
 msgid "Returns [code]true[/code] if the drag operation is successful."
@@ -81496,6 +83775,11 @@ msgid ""
 "Alternative to [constant Node.NOTIFICATION_DRAG_BEGIN] and [constant Node."
 "NOTIFICATION_DRAG_END] when you prefer polling the value."
 msgstr ""
+"Retourne [code]true[/code] si la fenêtre d'affichage effectue actuellement "
+"une opération de déposé-glissé.\n"
+"C'est une alternative à [constant Node. NOTIFICATION_DRAG_BEGIN] and "
+"[constant Node. NOTIFICATION_DRAG_END] lorsque vous préférez récupérer "
+"directement la valeur."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81512,6 +83796,9 @@ msgid ""
 "[Viewport] but makes you responsible for updating the position of this "
 "[Viewport] manually."
 msgstr ""
+"Attaque ce [Viewport] au [Viewport] racine avec le rectangle spécifié. Cela "
+"contourne le besoin d'un autre nœud pour afficher ce [Viewport] mais vous "
+"devez mettre à jour de la position de ce [Viewport] manuellement."
 
 #: doc/classes/Viewport.xml
 msgid "Stops the input from propagating further down the [SceneTree]."
@@ -81534,6 +83821,10 @@ msgid ""
 "size. If the size parameter is [code](-1, -1)[/code], it won't update the "
 "size."
 msgstr ""
+"Définit la surcharge de la taille de la fenêtre d'affichage. Si le paramètre "
+"[code]enable[/code] est [code]true[/code], le paramètre de surcharge sera "
+"utilisé, sinon ça utilisera la taille par défaut. Si le paramètre de taille "
+"est [code](-1, -1)[/code], sa taille ne sera pas mise à jour."
 
 #: doc/classes/Viewport.xml
 msgid "Forces update of the 2D and 3D worlds."
@@ -81544,10 +83835,14 @@ msgid ""
 "Moves the mouse pointer to the specified position in this [Viewport] using "
 "the coordinate system of this [Viewport]."
 msgstr ""
+"Déplace le pointeur de la souris à la position spécifiée dans ce [Viewport] "
+"en utilisant le système de coordonnées de ce [Viewport]."
 
 #: doc/classes/Viewport.xml
 msgid "If [code]true[/code], the viewport will be used in AR/VR process."
 msgstr ""
+"Si [code]true[/code], la fenêtre d'affichage sera utilisée dans le processus "
+"AR/VR."
 
 #: doc/classes/Viewport.xml
 msgid "If [code]true[/code], the viewport will process 2D audio streams."
@@ -81563,6 +83858,9 @@ msgid ""
 "positions of all child [CanvasItem]s. This is relative to the global canvas "
 "transform of the viewport."
 msgstr ""
+"La transformation du canevas de la fenpetre d'affichage, utile pour changer "
+"les positions à l'écran de tous les [CanvasItem] enfants. C'est relatif à la "
+"transformation globale du canevas de la fenêtre d'affichage."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81578,12 +83876,16 @@ msgstr ""
 #: doc/classes/Viewport.xml
 msgid "The overlay mode for test rendered geometry in debug purposes."
 msgstr ""
+"Le mode de surcouche (\"overlay\") pour tester la géométrie rendue lors du "
+"débogage."
 
 #: doc/classes/Viewport.xml
 msgid ""
 "If [code]true[/code], the viewport will disable 3D rendering. For actual "
 "disabling use [code]usage[/code]."
 msgstr ""
+"Si [code]true[/code], le viewport désactivera le rendu 3D. Pour le "
+"désactiver réellement, utilisez [code]usage[/code]."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81600,6 +83902,8 @@ msgid ""
 "The global canvas transform of the viewport. The canvas transform is "
 "relative to this."
 msgstr ""
+"La transformation globale de la toile de cette fenêtre d'affichage. La "
+"transformation en toile est relative à cela."
 
 #: doc/classes/Viewport.xml
 msgid "If [code]true[/code], the viewport will not receive input events."
@@ -81612,6 +83916,8 @@ msgid ""
 "If [code]true[/code], the GUI controls on the viewport will lay pixel "
 "perfectly."
 msgstr ""
+"Si [code]true[/code], les contrôles de l'interface graphique dans la fenêtre "
+"d'affichage s'alignent au pixel près."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81658,6 +83964,8 @@ msgid ""
 "If [code]true[/code], the objects rendered by viewport become subjects of "
 "mouse picking process."
 msgstr ""
+"Si [code]true[/code], les objets rendus dans la fenêtre d'affichage peuvent "
+"être sélectionnés par la souris."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81673,10 +83981,15 @@ msgid ""
 "The clear mode when viewport used as a render target.\n"
 "[b]Note:[/b] This property is intended for 2D usage."
 msgstr ""
+"Le mode clair quand la fenêtre d'affichage est utilisé comme cible de "
+"rendu.\n"
+"[b]Note :[/b] Cette propriété est destinée à une utilisation 2D."
 
 #: doc/classes/Viewport.xml
 msgid "The update mode when viewport used as a render target."
 msgstr ""
+"Le mode de mise à jour lorsque la fenêtre d'affichage est utilisé comme "
+"cible de rendu."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81692,18 +84005,22 @@ msgstr ""
 #: doc/classes/Viewport.xml
 msgid "The subdivision amount of the first quadrant on the shadow atlas."
 msgstr ""
+"La quantité de sous-division du premier quadrant de l'atlas de l'ombre."
 
 #: doc/classes/Viewport.xml
 msgid "The subdivision amount of the second quadrant on the shadow atlas."
 msgstr ""
+"La quantité de sous-division du deuxième quadrant de l'atlas de l'ombre."
 
 #: doc/classes/Viewport.xml
 msgid "The subdivision amount of the third quadrant on the shadow atlas."
 msgstr ""
+"La quantité de sous-division du troisième quadrant de l'atlas de l'ombre."
 
 #: doc/classes/Viewport.xml
 msgid "The subdivision amount of the fourth quadrant on the shadow atlas."
 msgstr ""
+"La quantité de sous-division du quatrième quadrant de l'atlas de l'ombre."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81729,10 +84046,15 @@ msgid ""
 "The width and height of viewport. Must be set to a value greater than or "
 "equal to 2 pixels on both dimensions. Otherwise, nothing will be displayed."
 msgstr ""
+"La largeur et la hauteur de la fenêtre d'affichage. Doit être défini à une "
+"valeur supérieure ou égale à 2 pixels dans les deux dimensions. Sinon, rien "
+"ne sera affiché."
 
 #: doc/classes/Viewport.xml
 msgid "If [code]true[/code], the size override affects stretch as well."
 msgstr ""
+"Si [code]true[/code], la surcharge de la taille affecte également "
+"l'étirement."
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -81765,6 +84087,8 @@ msgstr ""
 #: doc/classes/Viewport.xml
 msgid "The custom [World] which can be used as 3D environment source."
 msgstr ""
+"Le [World] personnalisé qui peut être utilisée comme source d'environnement "
+"en 3D."
 
 #: doc/classes/Viewport.xml
 msgid "The custom [World2D] which can be used as 2D environment source."
@@ -81781,6 +84105,9 @@ msgid ""
 "Emitted when the size of the viewport is changed, whether by [method "
 "set_size_override], resize of window, or some other means."
 msgstr ""
+"Émis lorsque la taille de la fenpetre d'affichage a changé, que ce soit par "
+"[method set_size_override], en redimensionnant la fenêtre, ou par d'autres "
+"moyens."
 
 #: doc/classes/Viewport.xml
 msgid "Do not update the render target."
@@ -81797,6 +84124,8 @@ msgstr ""
 msgid ""
 "Update the render target only when it is visible. This is the default value."
 msgstr ""
+"Met à jour la cible de rendu seulement quand elle est visible. C'est la "
+"valeur par défaut."
 
 #: doc/classes/Viewport.xml
 msgid "Always update the render target."
@@ -81804,11 +84133,11 @@ msgstr "Met toujours à jour la cible de rendu."
 
 #: doc/classes/Viewport.xml
 msgid "This quadrant will not be used."
-msgstr ""
+msgstr "Ce quadrant ne sera pas utilisé."
 
 #: doc/classes/Viewport.xml
 msgid "This quadrant will only be used by one shadow map."
-msgstr ""
+msgstr "Ce quadrant ne sera utilisé que par une seule carte d'ombre."
 
 #: doc/classes/Viewport.xml
 msgid "This quadrant will be split in 4 and used by up to 4 shadow maps."
@@ -82283,8 +84612,8 @@ msgid ""
 "Returns [code]true[/code] when the specified layer is enabled in [member "
 "layers] and [code]false[/code] otherwise."
 msgstr ""
-"Retourne [code]true[/code] si le calque spécifié est actif, ou "
-"[code]false[/code] sinon."
+"Retourne [code]true[/code] si le calque spécifié est actif, ou [code]false[/"
+"code] sinon."
 
 #: doc/classes/VisualInstance.xml
 msgid ""
@@ -82502,8 +84831,8 @@ msgid ""
 "target node can have only one sequence port."
 msgstr ""
 "Connecte deux ports d'une séquence. L'exécution passera de "
-"[code]from_output[/code] de [code]from_node[/code] vers [code]to_node[/code]."
-"\n"
+"[code]from_output[/code] de [code]from_node[/code] vers [code]to_node[/"
+"code].\n"
 "Contrairement à [method data_connect], il n'y a pas ∂e [code]to_port[/code], "
 "puisque le nœud cible ne peut avoir qu'un seul port dans la séquence."
 
@@ -82555,8 +84884,8 @@ msgid ""
 "A Visual Script node representing a constant from base types, such as "
 "[constant Vector3.AXIS_X]."
 msgstr ""
-"Un nœud Visual Script représentant une constante des types de base, comme ["
-"constant Vector3.AXIS_X]."
+"Un nœud Visual Script représentant une constante des types de base, comme "
+"[constant Vector3.AXIS_X]."
 
 #: modules/visual_script/doc_classes/VisualScriptBasicTypeConstant.xml
 msgid "The type to get the constant from."
@@ -82739,8 +85068,8 @@ msgid ""
 "the third input. Uses the formula [code]a + (a - b) * t[/code]."
 msgstr ""
 "Retourner un nombre linéairement interpolé entre les deux premières entrées, "
-"basé sur la troisième entrée. Utilise la formule [code]a + (a - b) * "
-"t[/code]."
+"basé sur la troisième entrée. Utilise la formule [code]a + (a - b) * t[/"
+"code]."
 
 #: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
 msgid "Moves the number toward a value, based on the third input."
@@ -83365,8 +85694,8 @@ msgid ""
 "The mode for RPC calls. See [method Node.rpc] for more details and [enum "
 "RPCCallMode] for available options."
 msgstr ""
-"Le mode pour les appels RPC. Voir [method Node.rpc] pour plus de détails et ["
-"enum RPCCallMode] pour les options disponibles."
+"Le mode pour les appels RPC. Voir [method Node.rpc] pour plus de détails et "
+"[enum RPCCallMode] pour les options disponibles."
 
 #: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
 msgid ""
@@ -83840,8 +86169,8 @@ msgid ""
 "The node path to use when [member set_mode] is set to [constant "
 "CALL_MODE_NODE_PATH]."
 msgstr ""
-"Le chemin du nœud à utiliser lorsque [member set_mode] est défini à ["
-"constant CALL_MODE_NODE_PATH]."
+"Le chemin du nœud à utiliser lorsque [member set_mode] est défini à "
+"[constant CALL_MODE_NODE_PATH]."
 
 #: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
 msgid ""
@@ -83913,7 +86242,8 @@ msgstr ""
 #: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
 msgid ""
 "The name of the property to set. Changing this will clear [member index]."
-msgstr "Le nom de la propriété à définir. Changer cela effecera [member index]."
+msgstr ""
+"Le nom de la propriété à définir. Changer cela effecera [member index]."
 
 #: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
 msgid ""
@@ -84290,7 +86620,8 @@ msgstr "Un signal depuis cet [Object] sera utilisé."
 
 #: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
 msgid "A signal from the given [Node] in the scene tree will be used."
-msgstr "Un signal du [Node] donné dans l'arborescence de la scène sera utilisé."
+msgstr ""
+"Un signal du [Node] donné dans l'arborescence de la scène sera utilisé."
 
 #: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
 msgid "A signal from an instanced node with the given type will be used."
@@ -84340,8 +86671,8 @@ msgid ""
 "Sets margin size, where black bars (or images, if [method "
 "black_bars_set_images] was used) are rendered."
 msgstr ""
-"Définit la taille de la marge, où des barres noires (ou des images, si ["
-"method black_bars_set_images] est utilisé) sont rendues."
+"Définit la taille de la marge, où des barres noires (ou des images, si "
+"[method black_bars_set_images] est utilisé) sont rendues."
 
 #: doc/classes/VisualServer.xml
 msgid ""
@@ -84699,7 +87030,7 @@ msgid ""
 "texture_scale]."
 msgstr ""
 "Définit le facteur d'échelle de la texture de lumière. Équivalent à [member "
-"Light2D.texture_scale]"
+"Light2D.texture_scale]."
 
 #: doc/classes/VisualServer.xml
 msgid ""
@@ -84925,7 +87256,7 @@ msgid ""
 "Environment.background_sky_custom_fov]."
 msgstr ""
 "Définit un angle de vue personnalisé pour le ciel [Sky] en arrière-plan. "
-"Équivalent à [member Environnement.background_sky_custom_fov]"
+"Équivalent à [member Environnement.background_sky_custom_fov]."
 
 #: doc/classes/VisualServer.xml
 msgid ""
@@ -84933,7 +87264,7 @@ msgid ""
 "to [member Environment.background_sky_orientation]."
 msgstr ""
 "Définit la rotation du ciel [Sky] en arrière-plan exprimé avec une [Basis]. "
-"Équivalent à [member Environnement.background_sky_orientation]"
+"Équivalent à [member Environnement.background_sky_orientation]."
 
 #: doc/classes/VisualServer.xml
 msgid ""
@@ -85006,8 +87337,8 @@ msgid ""
 "[b]Note:[/b] When running a headless or server binary, this function returns "
 "an empty string."
 msgstr ""
-"Retourne le vendeur de l'adaptateur vidéo (par exemple \"NVIDIA Corporation\""
-").\n"
+"Retourne le vendeur de l'adaptateur vidéo (par exemple \"NVIDIA "
+"Corporation\").\n"
 "[b]Note :[/b] Lors de l'exécution d'une version sans graphique ou de "
 "serveur, cette fonction retourne une chaîne vide."
 
@@ -85060,16 +87391,16 @@ msgid ""
 "Returns the dynamic range set for this GI probe. Equivalent to [member "
 "GIProbe.dynamic_range]."
 msgstr ""
-"Retourne la gamme dynamique pour cette sonde GI. Équivalent à [member GIProbe"
-".dynamic_range]"
+"Retourne la gamme dynamique pour cette sonde GI. Équivalent à [member "
+"GIProbe.dynamic_range]."
 
 #: doc/classes/VisualServer.xml
 msgid ""
 "Returns the energy multiplier for this GI probe. Equivalent to [member "
 "GIProbe.energy]."
 msgstr ""
-"Retourne le multiplicateur d'énergie pour cette sonde GI. Équivalent à ["
-"member GIProbe.energy]"
+"Retourne le multiplicateur d'énergie pour cette sonde GI. Équivalent à "
+"[member GIProbe.energy]."
 
 #: doc/classes/VisualServer.xml
 msgid ""
@@ -85083,7 +87414,7 @@ msgid ""
 "GIProbe.propagation]."
 msgstr ""
 "Retourne la valeur de propagation de cette sonde GI. Équivalent à [member "
-"GIProbe.propagation]"
+"GIProbe.propagation]."
 
 #: doc/classes/VisualServer.xml
 msgid "Returns the Transform set by [method gi_probe_set_to_cell_xform]."
@@ -85095,7 +87426,7 @@ msgid ""
 "is compressed. Equivalent to [member GIProbe.compress]."
 msgstr ""
 "Retourne [code]true[/code] si les données de cette sonde GI sont "
-"compressées. Équivalent à [member GIProbe.compress]"
+"compressées. Équivalent à [member GIProbe.compress]."
 
 #: doc/classes/VisualServer.xml
 msgid ""
@@ -85741,12 +88072,10 @@ msgstr ""
 "utilisant la [method instance_set_base] utilisant le RID retourné."
 
 #: doc/classes/VisualServer.xml
-#, fuzzy
 msgid "Returns a mesh's blend shape count."
 msgstr "Retourne le nombre de formes de mélange d’un maillage."
 
 #: doc/classes/VisualServer.xml
-#, fuzzy
 msgid "Returns a mesh's blend shape mode."
 msgstr "Retourne le mode de forme de mélange d’un maillage."
 
@@ -85763,7 +88092,6 @@ msgid "Removes a mesh's surface."
 msgstr "Supprime la surface d'un maillage."
 
 #: doc/classes/VisualServer.xml
-#, fuzzy
 msgid "Sets a mesh's blend shape count."
 msgstr "Définit le nombre de formes de mélange d’un maillage."
 
@@ -86907,11 +89235,13 @@ msgstr "Nombre de poids / os par sommet."
 
 #: doc/classes/VisualServer.xml
 msgid "The minimum Z-layer for canvas items."
-msgstr "Le niveau minimal du calque de profondeur pour les éléments de canevas."
+msgstr ""
+"Le niveau minimal du calque de profondeur pour les éléments de canevas."
 
 #: doc/classes/VisualServer.xml
 msgid "The maximum Z-layer for canvas items."
-msgstr "Le niveau maximal du calque de profondeur pour les éléments de canevas."
+msgstr ""
+"Le niveau maximal du calque de profondeur pour les éléments de canevas."
 
 #: doc/classes/VisualServer.xml
 msgid ""
@@ -89273,7 +91603,6 @@ msgstr ""
 "ignorant la dernière ligne et colonne de la transformation."
 
 #: doc/classes/VisualShaderNodeUniform.xml
-#, fuzzy
 msgid "A base type for the uniforms within the visual shader graph."
 msgstr "Le type de base pour les uniformes dans le graphe du Visual Shader."
 
@@ -89822,10 +92151,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+#, fuzzy
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
-"Retourne le [Object] que cette référence faible ([code]weakref[/code]) "
-"contient."
+"Retourne la valeur initiale de la propriété spécifiée. Retourne [code]null[/"
+"code] si la propriété n'existe pas."
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
 msgid "Closes this data channel, notifying the other peer."
diff --git a/doc/translations/gl.po b/doc/translations/gl.po
index 207a818761..0f079f0003 100644
--- a/doc/translations/gl.po
+++ b/doc/translations/gl.po
@@ -541,8 +541,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -552,7 +553,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -606,7 +608,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -618,7 +621,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1033,10 +1037,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4847,19 +4856,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4880,21 +4891,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4903,9 +4918,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5557,9 +5573,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5733,8 +5749,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8736,8 +8752,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8788,10 +8805,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9033,12 +9060,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9584,7 +9605,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9745,12 +9771,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9898,6 +9928,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10038,7 +10083,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11716,7 +11764,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11809,7 +11857,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11837,9 +11887,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12336,13 +12386,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12368,8 +12419,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12682,12 +12735,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12732,8 +12785,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12781,8 +12836,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12844,7 +12902,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12969,7 +13027,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15965,7 +16026,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18690,7 +18753,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18839,16 +18904,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -18993,18 +19059,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23908,8 +23962,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24529,7 +24587,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26113,10 +26173,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27523,8 +27586,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29824,11 +29887,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30673,7 +30739,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30685,6 +30755,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33042,14 +33122,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33057,21 +33137,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34648,9 +34728,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35109,7 +35189,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36221,7 +36303,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37036,13 +37118,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40706,7 +40800,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46070,7 +46166,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46309,7 +46407,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47038,7 +47138,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49719,8 +49823,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53737,7 +53852,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53881,13 +53998,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55077,7 +55200,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55696,6 +55822,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56030,7 +56164,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57463,7 +57599,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58728,6 +58864,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58789,6 +58928,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58811,7 +58953,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59948,6 +60093,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59977,6 +60126,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60018,7 +60171,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64883,21 +65038,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64910,7 +65069,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64939,7 +65098,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64949,22 +65140,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64977,8 +65181,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65176,16 +65382,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73815,7 +74021,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/hi.po b/doc/translations/hi.po
index 2df4b9bbe4..68273c5a73 100644
--- a/doc/translations/hi.po
+++ b/doc/translations/hi.po
@@ -5,12 +5,13 @@
 #
 # harvinder rathor <harvinderr09@gmail.com>, 2021.
 # Lalita mishra <yashkebacche1234@gmail.com>, 2022.
+# Yan Chen <cyan97087@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-02-03 13:04+0000\n"
-"Last-Translator: Lalita mishra <yashkebacche1234@gmail.com>\n"
+"PO-Revision-Date: 2022-08-21 06:02+0000\n"
+"Last-Translator: Yan Chen <cyan97087@gmail.com>\n"
 "Language-Team: Hindi <https://hosted.weblate.org/projects/godot-engine/godot-"
 "class-reference/hi/>\n"
 "Language: hi\n"
@@ -18,7 +19,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.11-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -61,7 +62,6 @@ msgid "Method Descriptions"
 msgstr "Method Descriptions"
 
 #: doc/tools/make_rst.py
-#, fuzzy
 msgid "Theme Property Descriptions"
 msgstr "थीम विशेषता"
 
@@ -540,8 +540,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -551,7 +552,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -605,7 +607,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -617,7 +620,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1032,10 +1036,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4846,19 +4855,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4879,21 +4890,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4902,9 +4917,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5556,9 +5572,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5732,8 +5748,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8735,8 +8751,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8787,10 +8804,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9032,12 +9059,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9583,7 +9604,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9744,12 +9770,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9897,6 +9927,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10037,7 +10082,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11715,7 +11763,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11808,7 +11856,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11836,9 +11886,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12335,13 +12385,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12367,8 +12418,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12681,12 +12734,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12731,8 +12784,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12780,8 +12835,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12843,7 +12901,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12968,7 +13026,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15964,7 +16025,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18689,7 +18752,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18838,16 +18903,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -18992,18 +19058,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23907,8 +23961,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24528,7 +24586,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26112,10 +26172,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27522,8 +27585,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29823,11 +29886,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30672,7 +30738,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30684,6 +30754,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33041,14 +33121,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33056,21 +33136,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34647,9 +34727,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35108,7 +35188,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36220,7 +36302,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37035,13 +37117,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40705,7 +40799,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46069,7 +46165,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46308,7 +46406,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47037,7 +47137,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49718,8 +49822,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53736,7 +53851,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53880,13 +53997,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55076,7 +55199,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55695,6 +55821,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56029,7 +56163,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57462,7 +57598,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58727,6 +58863,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58788,6 +58927,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58810,7 +58952,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59947,6 +60092,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59976,6 +60125,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60017,7 +60170,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64882,21 +65037,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64909,7 +65068,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64938,7 +65097,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64948,22 +65139,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64976,8 +65180,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65175,16 +65381,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73814,7 +74020,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/hu.po b/doc/translations/hu.po
index 221206451a..feaff9b12c 100644
--- a/doc/translations/hu.po
+++ b/doc/translations/hu.po
@@ -559,8 +559,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -570,7 +571,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -624,7 +626,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -636,7 +639,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1051,10 +1055,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4865,19 +4874,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4898,21 +4909,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4921,9 +4936,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5575,9 +5591,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5751,8 +5767,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8754,8 +8770,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8806,10 +8823,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9051,12 +9078,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9602,7 +9623,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9763,12 +9789,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9916,6 +9946,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10056,7 +10101,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11734,7 +11782,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11827,7 +11875,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11855,9 +11905,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12354,13 +12404,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12386,8 +12437,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12700,12 +12753,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12750,8 +12803,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12799,8 +12854,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12862,7 +12920,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12987,7 +13045,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15983,7 +16044,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18708,7 +18771,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18857,16 +18922,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19011,18 +19077,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23926,8 +23980,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24547,7 +24605,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26131,10 +26191,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27541,8 +27604,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29842,11 +29905,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30691,7 +30757,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30703,6 +30773,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33060,14 +33140,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33075,21 +33155,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34666,9 +34746,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35127,7 +35207,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36239,7 +36321,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37054,13 +37136,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40724,7 +40818,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46088,7 +46184,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46327,7 +46425,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47056,7 +47156,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49737,8 +49841,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53755,7 +53870,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53899,13 +54016,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55095,7 +55218,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55714,6 +55840,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56048,7 +56182,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57481,7 +57617,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58746,6 +58882,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58807,6 +58946,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58829,7 +58971,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59966,6 +60111,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59995,6 +60144,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60036,7 +60189,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64901,21 +65056,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64928,7 +65087,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64957,7 +65116,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64967,22 +65158,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64995,8 +65199,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65194,16 +65400,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73833,7 +74039,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/id.po b/doc/translations/id.po
index 39310a6160..7d50703868 100644
--- a/doc/translations/id.po
+++ b/doc/translations/id.po
@@ -16,12 +16,13 @@
 # Reza Almanda <rezaalmanda27@gmail.com>, 2022.
 # Tsaqib Fadhlurrahman Soka <sokatsaqib@gmail.com>, 2022.
 # yusuf afandi <afandi.yusuf.04@gmail.com>, 2022.
+# Yan Chen <cyan97087@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-07-09 21:12+0000\n"
-"Last-Translator: yusuf afandi <afandi.yusuf.04@gmail.com>\n"
+"PO-Revision-Date: 2022-08-14 04:02+0000\n"
+"Last-Translator: Yan Chen <cyan97087@gmail.com>\n"
 "Language-Team: Indonesian <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/id/>\n"
 "Language: id\n"
@@ -29,7 +30,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -134,13 +135,12 @@ msgstr ""
 "dipanggil langsung menggunakan nama class."
 
 #: doc/tools/make_rst.py
-#, fuzzy
 msgid ""
 "This method describes a valid operator to use with this type as left-hand "
 "operand."
 msgstr ""
-"Metode ini menjelaskan operator yang valid untuk digunakan dengan jenis ini "
-"sebagai nilai pembilang."
+"Metode ini menjelaskan operator yang valid untuk digunakan dengan tipe ini "
+"sebagai operan kiri."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid "Built-in GDScript functions."
@@ -317,7 +317,6 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Returns the arc tangent of [code]y/x[/code] in radians. Use to get the angle "
 "of tangent [code]y/x[/code]. To compute the value, the method takes into "
@@ -327,13 +326,13 @@ msgid ""
 "a = atan2(0, -1) # a is 3.141593\n"
 "[/codeblock]"
 msgstr ""
-"Mengembalikan tangen busur [code]y/x[/code] dalam radian. Gunakan untuk "
-"mendapatkan sudut tangen [kode]y/x[/kode]. Untuk menghitung nilai, metode "
-"memperhitungkan tanda dari kedua argumen untuk menentukan kuadran.\n"
+"Mengembalikan tangen busur dari [code]y/x[/code] dalam radian. Gunakan untuk "
+"mendapatkan sudut tangen [code]y/x[/code]. Untuk menghitung nilai, metode "
+"ini memperhitungkan tanda kedua argumen untuk menentukan kuadran.\n"
 "Catatan penting: Koordinat Y didahulukan, berdasarkan konvensi.\n"
-"[blok kode]\n"
+"[codeblock]\n"
 "a = atan2(0, -1) # a adalah 3.141593\n"
-"[/blok kode]"
+"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -789,8 +788,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -800,7 +800,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -880,7 +881,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -892,7 +894,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1434,19 +1437,18 @@ msgid ""
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Memetakan sebuah [code] nilai[/code] dari jangkauan [code][istart, istop][/"
-"code] ke [code][ostart, ostop][/code].\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Mengembalikan 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -5263,19 +5265,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5296,21 +5300,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5320,9 +5328,10 @@ msgstr "Mengembalikan nilai hiperbolik tangen dari parameter."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5974,9 +5983,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6150,8 +6159,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -9153,8 +9162,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9205,10 +9215,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9450,12 +9470,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -10001,7 +10015,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10162,12 +10181,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10315,6 +10338,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10455,7 +10493,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12133,7 +12174,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12226,7 +12267,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12254,9 +12297,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12754,13 +12797,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12786,8 +12830,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13100,12 +13146,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13150,8 +13196,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13199,8 +13247,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13262,7 +13313,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13387,7 +13438,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16383,7 +16437,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19108,7 +19164,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19257,16 +19315,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19411,18 +19470,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -24332,8 +24379,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24954,7 +25005,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26542,10 +26595,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27953,8 +28009,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30254,11 +30310,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31103,7 +31162,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31115,6 +31178,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33472,14 +33545,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33487,22 +33560,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Mengembalikan nilai hiperbolik tangen dari parameter."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Mengembalikan nilai hiperbolik tangen dari parameter."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Mengembalikan nilai hiperbolik tangen dari parameter."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Mengembalikan nilai hiperbolik tangen dari parameter."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -35078,9 +35155,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35540,7 +35617,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36671,7 +36750,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37489,13 +37568,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41162,7 +41253,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46543,7 +46636,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Mengembalikan nilai hiperbolik tangen dari parameter."
 
 #: doc/classes/PopupMenu.xml
@@ -46782,7 +46877,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47511,7 +47608,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -50192,8 +50293,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54211,7 +54323,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54355,13 +54469,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55551,7 +55671,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -56170,6 +56293,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56504,7 +56635,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57937,7 +58070,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59204,6 +59337,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59265,6 +59401,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59287,7 +59426,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60424,6 +60566,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Mengembalikan nilai hiperbolik tangen dari parameter."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60453,6 +60600,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Mengembalikan nilai hiperbolik tangen dari parameter."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60494,7 +60646,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65364,21 +65518,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65391,7 +65549,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65420,7 +65578,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65430,22 +65620,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65458,8 +65661,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65657,16 +65862,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74302,7 +74507,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/is.po b/doc/translations/is.po
index e3080abf39..2b748209ad 100644
--- a/doc/translations/is.po
+++ b/doc/translations/is.po
@@ -540,8 +540,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -551,7 +552,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -605,7 +607,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -617,7 +620,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1032,10 +1036,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4846,19 +4855,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4879,21 +4890,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4902,9 +4917,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5556,9 +5572,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5732,8 +5748,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8735,8 +8751,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8787,10 +8804,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9032,12 +9059,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9583,7 +9604,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9744,12 +9770,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9897,6 +9927,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10037,7 +10082,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11715,7 +11763,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11808,7 +11856,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11836,9 +11886,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12335,13 +12385,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12367,8 +12418,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12681,12 +12734,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12731,8 +12784,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12780,8 +12835,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12843,7 +12901,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12968,7 +13026,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15964,7 +16025,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18689,7 +18752,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18838,16 +18903,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -18992,18 +19058,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23907,8 +23961,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24528,7 +24586,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26112,10 +26172,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27522,8 +27585,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29823,11 +29886,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30672,7 +30738,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30684,6 +30754,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33041,14 +33121,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33056,21 +33136,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34647,9 +34727,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35108,7 +35188,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36220,7 +36302,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37035,13 +37117,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40705,7 +40799,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46069,7 +46165,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46308,7 +46406,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47037,7 +47137,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49718,8 +49822,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53736,7 +53851,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53880,13 +53997,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55076,7 +55199,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55695,6 +55821,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56029,7 +56163,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57462,7 +57598,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58727,6 +58863,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58788,6 +58927,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58810,7 +58952,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59947,6 +60092,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59976,6 +60125,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60017,7 +60170,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64882,21 +65037,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64909,7 +65068,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64938,7 +65097,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64948,22 +65139,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64976,8 +65180,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65175,16 +65381,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73814,7 +74020,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/it.po b/doc/translations/it.po
index e07c906b29..019642cd3a 100644
--- a/doc/translations/it.po
+++ b/doc/translations/it.po
@@ -30,7 +30,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-07-31 16:43+0000\n"
+"PO-Revision-Date: 2022-08-12 17:09+0000\n"
 "Last-Translator: Mirko <miknsop@gmail.com>\n"
 "Language-Team: Italian <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/it/>\n"
@@ -62,7 +62,6 @@ msgid "Theme Properties"
 msgstr "Proprietà del tema"
 
 #: doc/tools/make_rst.py
-#, fuzzy
 msgid "Signals"
 msgstr "Segnali"
 
@@ -848,8 +847,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -859,7 +859,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "Ritorna un'interpolazione o un fattore estrapolato considerando il raggio "
 "specificato nel [code]from[/code] e [code]to[/code], e i valori interpolati "
@@ -951,7 +952,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -963,7 +965,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Interpola linearmente tra due valori mediante un valore definito in "
 "[code]weight[/code]. Per interpolare, [code]weight[/code] dovrebbe rimanere "
@@ -1644,16 +1647,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Effettua una mappatura di un valore [code]value[/code] da un intervallo "
-"[code][istart, istop][/code] in [code][ostart, ostop][/code].\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Restituisce 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -5848,19 +5851,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5881,21 +5886,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5905,9 +5914,10 @@ msgstr "Restituisce la tangente del parametro."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6559,9 +6569,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6735,8 +6745,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -9758,8 +9768,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9810,10 +9821,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -10059,12 +10080,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -10610,7 +10625,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10771,12 +10791,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10927,6 +10951,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -11067,7 +11106,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12749,7 +12791,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12842,7 +12884,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12870,9 +12914,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -13377,13 +13421,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -13409,8 +13454,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13723,12 +13770,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13773,8 +13820,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13822,8 +13871,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13885,7 +13937,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14010,7 +14062,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -17071,7 +17126,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19826,7 +19883,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19975,16 +20034,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -20130,18 +20190,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Restituisce l'arco-seno del parametro."
@@ -25065,8 +25113,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -25690,7 +25742,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -27285,10 +27339,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -28711,8 +28768,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -31017,11 +31074,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31869,7 +31929,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31881,6 +31945,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -34256,14 +34330,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34271,22 +34345,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Restituisce il resto dei due vettori."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Calcola il prodotto vettoriale di questo vettore e [code]b[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Calcola il prodotto vettoriale di questo vettore e [code]with[/code]."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Ritorna [code]true[/code] se [code]s[/code] è zero o quasi zero."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -35867,9 +35945,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -36330,7 +36408,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -37474,7 +37554,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -38308,13 +38388,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41993,7 +42085,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -47400,7 +47494,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Calcola il prodotto vettoriale di questo vettore e [code]with[/code]."
 
 #: doc/classes/PopupMenu.xml
@@ -47639,7 +47735,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -48369,7 +48467,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -51050,8 +51152,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -55077,7 +55190,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55223,13 +55338,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -56419,7 +56540,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -57040,6 +57164,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -57374,7 +57506,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -58812,7 +58946,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -60082,6 +60216,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -60143,6 +60280,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -60165,7 +60305,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -61304,6 +61447,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Calcola il prodotto vettoriale di questo vettore e [code]b[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -61334,6 +61482,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Calcola il prodotto vettoriale di questo vettore e [code]b[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -61375,7 +61528,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -66299,21 +66454,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -66326,7 +66485,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -66355,7 +66514,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -66365,22 +66556,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -66393,8 +66597,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -66601,17 +66807,16 @@ msgid "Unknown error."
 msgstr "Errore sconosciuto."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-#, fuzzy
-msgid "UPNP device."
-msgstr "Dispositivo UPNP."
+msgid "Universal Plug and Play (UPnP) device."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -75309,7 +75514,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/ja.po b/doc/translations/ja.po
index fe76c741d0..0e49cb321e 100644
--- a/doc/translations/ja.po
+++ b/doc/translations/ja.po
@@ -814,6 +814,7 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Returns an interpolation or extrapolation factor considering the range "
 "specified in [code]from[/code] and [code]to[/code], and the interpolated "
@@ -821,8 +822,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -832,7 +834,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "[code]from[/code] と [code]to[/code] で指定された範囲と、[code]weight[/code] "
 "で指定された補間値を考慮した、補間または外挿の係数を返します。[code]weight[/"
@@ -918,12 +921,14 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Linearly interpolates between two values by the factor defined in "
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -935,7 +940,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "２つの値および正規化された値から線形補間します。これは [method inverse_lerp] "
 "の逆です。\n"
@@ -1598,16 +1604,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"範囲 [code][istart, istop][/code] の値 [code]value[/code] を、範囲 [code]"
-"[ostart, ostop][/code] へとマップします。\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # 0.5 と返す\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 #, fuzzy
@@ -6218,24 +6224,22 @@ msgstr ""
 "合にのみ有用で、そうでなければエディタは追加用ノードを表示しません。"
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
-msgstr "このノードのテキストキャプションを取得します (特定のエディタで使用)。"
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
+msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
-"子ノードをインデックスで取得します ([AnimationRootNode] を継承したエディタで"
-"使用)。"
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
-"すべての子ノードを順番通りに [code]name: node[/code] の辞書として取得します。"
-"[AnimationRootNode] を継承する場合にのみ有用です。"
 
 #: doc/classes/AnimationNode.xml
 msgid ""
@@ -6256,16 +6260,21 @@ msgstr ""
 "ローカルメモリで、与えられたリソースは複数のツリーで再利用できます。"
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 "特定のパラメータのデフォルト値を取得します。パラメータはノードに使用されるカ"
 "スタムのローカルメモリで、与えられたリソースは複数のツリーで再利用できます。"
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
@@ -6274,9 +6283,11 @@ msgstr ""
 "す。フォーマットは [method Object.get_property_list] に似ています。"
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 "このノードで編集するフィルターを、ブレンドツリーエディタにて表示させたい場合"
 "は [code]true[/code] を返すようにします。"
@@ -6288,10 +6299,12 @@ msgstr ""
 "指定したパスがフィルタリングされていれば [code]true[/code] を返します。"
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -7089,9 +7102,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -7314,9 +7327,10 @@ msgstr ""
 "[code]animation[/code] の名前を返します。もし無ければ、空の文字列を返します。"
 
 #: doc/classes/AnimationPlayer.xml
+#, fuzzy
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 "キー [code]name[/code] を持つ [Animation] を返すか、見つからない場合は "
 "[code]null[/code] を返します。"
@@ -11197,8 +11211,9 @@ msgstr ""
 "オーディオバスの基底リソース。リソースが適用されているバスに対し、オーディオ"
 "エフェクトを適用します。"
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -11258,10 +11273,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -11560,12 +11585,6 @@ msgstr ""
 "「耳ざわり」になります。ゲームにおいては、水没した機器やスピーカーが出すよう"
 "な音を非常に効率的にシミュレートすることができます。"
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr "歪みの強さ。値の範囲は0～1です。"
@@ -12252,8 +12271,13 @@ msgstr ""
 "フェクトを追加します。"
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
-msgstr "システム上で検出されたすべてのオーディオ入力デバイスの名前を返します。"
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid "Generates an [AudioBusLayout] using the available buses and effects."
@@ -12444,12 +12468,16 @@ msgstr "利用可能なオーディオバスの数。"
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -12607,6 +12635,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 #, fuzzy
 msgid "MP3 audio stream driver."
@@ -12762,7 +12805,10 @@ msgstr "3D空間で3Dサウンドを再生します。"
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -14686,7 +14732,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -14779,7 +14825,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -14807,9 +14855,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -15319,13 +15367,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -15351,8 +15400,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -15668,12 +15719,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -15718,8 +15769,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -15767,8 +15820,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -15830,7 +15886,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -15967,7 +16023,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -19020,7 +19079,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -21826,7 +21887,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -21975,16 +22038,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -22130,18 +22194,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "ブレンド軸上のポイントの数を返します。"
@@ -27092,8 +27144,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -27716,7 +27772,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -29324,10 +29382,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -30766,8 +30827,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -33078,11 +33139,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -33934,7 +33998,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -33946,6 +34014,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -36376,14 +36454,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -36391,22 +36469,29 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "アニメーションのトラック数を返します。"
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "インデックス [code]point[/code] のポイントの位置を返します。"
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
+"ブレンド空間からインデックス [code]point[/code] のポイントを削除します。"
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
+"インデックス [code]triangle[/code] の三角形内にある、インデックス "
+"[code]point[/code] のポイントの位置を返します。"
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -37986,9 +38071,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -38456,7 +38541,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -39618,7 +39705,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -40460,13 +40547,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -44155,7 +44254,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -49593,7 +49694,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 "与えられた[code]id[/code]を持つ点の位置[code]position[/code]を設定します。"
 
@@ -49836,7 +49939,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -50572,7 +50677,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53264,8 +53373,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -57329,7 +57449,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -57476,13 +57598,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -58673,7 +58801,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -59302,6 +59433,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -59656,7 +59795,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -61345,7 +61486,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -62635,6 +62776,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -62696,6 +62840,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -62718,7 +62865,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -63868,6 +64018,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "インデックス [code]bus_idx[/code] のバスの音量を dB で返します。"
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -63898,6 +64053,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "インデックス [code]bus_idx[/code] のバスの音量を dB で返します。"
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -63940,8 +64100,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+#, fuzzy
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
+"カスタムボタンが押されたときに表示されます。[method add_button] を参照してく"
+"ださい。"
 
 #: doc/classes/Tabs.xml
 msgid "Emitted when a tab is clicked, even if it is the current tab."
@@ -68905,21 +69070,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -68932,7 +69101,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -68961,7 +69130,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -68971,22 +69172,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -68999,8 +69213,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -69198,16 +69414,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -77981,7 +78197,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/ko.po b/doc/translations/ko.po
index ac9274cee6..05cbf2cdba 100644
--- a/doc/translations/ko.po
+++ b/doc/translations/ko.po
@@ -16,12 +16,13 @@
 # 한수현 <shh1473@ajou.ac.kr>, 2022.
 # vrSono <global.sonogong@gmail.com>, 2022.
 # 김태우 <ogosengi3@gmail.com>, 2022.
+# 이지민 <jiminaleejung@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-06-29 10:30+0000\n"
-"Last-Translator: 김태우 <ogosengi3@gmail.com>\n"
+"PO-Revision-Date: 2022-09-07 02:16+0000\n"
+"Last-Translator: 이지민 <jiminaleejung@gmail.com>\n"
 "Language-Team: Korean <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/ko/>\n"
 "Language: ko\n"
@@ -29,7 +30,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -520,6 +521,8 @@ msgid ""
 "Converts a dictionary (previously created with [method inst2dict]) back to "
 "an instance. Useful for deserializing."
 msgstr ""
+"([메서드 inst2dict]으로 생성된) 딕셔너리를 인스턴스로 변경합니다. 역직렬화에 "
+"유용하게 사용됩니다."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -690,8 +693,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -701,7 +705,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -725,11 +730,15 @@ msgid ""
 "Returns whether [code]instance[/code] is a valid object (e.g. has not been "
 "deleted from memory)."
 msgstr ""
+"[code]인스턴스[/code]가 유효한 객체인지 여부를 반환합니다 (예시. 메모리에서 "
+"삭제되지 않았는지)."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Returns whether [code]s[/code] is a NaN (\"Not a Number\" or invalid) value."
 msgstr ""
+"[code]s[/code]가 NaN (\"Not a Number\" 혹은 유효하지 않은) 값인지 여부를 반환"
+"합니다."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -737,6 +746,9 @@ msgid ""
 "This method is faster than using [method is_equal_approx] with one value as "
 "zero."
 msgstr ""
+"[code]s[/code]가 0이거나 0에 인접한 값이면 [code]true[/code]를 반환합니다. \n"
+"이 메서드는 [메서드 is_equal_approx]에 0을 인자값으로 사용하는 경우보다 빠릅"
+"니다."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -755,7 +767,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -767,7 +780,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1198,10 +1212,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -5019,19 +5038,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5052,21 +5073,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5076,9 +5101,10 @@ msgstr "매개변수의 탄젠트 값을 반환합니다."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5730,9 +5756,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5906,8 +5932,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8910,8 +8936,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8962,10 +8989,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9208,12 +9245,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9759,7 +9790,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9920,12 +9956,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10073,6 +10113,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10213,7 +10268,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11893,7 +11951,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11986,7 +12044,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12014,9 +12074,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12517,13 +12577,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12548,10 +12609,19 @@ msgid "Custom drawing in 2D"
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
+"노드가 [SceneTree]에 들어갈 때 호출됩니다 (예를 들어 인스턴싱되거나, 씬이 바"
+"뀌거나 스크립트에서 [method add_child]를 호출한 경우). 노드가 자손을 가지고 "
+"있다면 자신의 [method _enter_tree]가 먼저 불리고 자손이 그 다음에 불릴 것입니"
+"다.\n"
+"[method Object._notification]의 [constant NOTIFICATION_ENTER_TREE] 노티에 대"
+"응합니다."
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -12863,12 +12933,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12913,8 +12983,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12962,8 +13034,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13025,7 +13100,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13150,7 +13225,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16180,7 +16258,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18911,7 +18991,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19060,16 +19142,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19215,18 +19298,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "매개변수의 아크사인 값을 반환합니다."
@@ -24202,8 +24273,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24825,7 +24900,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26413,10 +26490,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27825,8 +27905,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30134,11 +30214,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30984,7 +31067,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30996,6 +31083,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33357,14 +33454,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33372,22 +33469,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "매개변수의 사인 값을 반환합니다."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "매개변수의 사인 값을 반환합니다."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "매개변수의 사인 값을 반환합니다."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "매개변수의 사인 값을 반환합니다."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -34964,9 +35065,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35427,7 +35528,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36564,7 +36667,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37390,13 +37493,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41192,7 +41307,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46578,7 +46695,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "매개변수의 사인 값을 반환합니다."
 
 #: doc/classes/PopupMenu.xml
@@ -46817,7 +46936,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47547,7 +47668,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -50228,8 +50353,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54248,7 +54384,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54392,13 +54530,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55588,7 +55732,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -56207,6 +56354,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56541,7 +56696,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57974,7 +58131,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59241,6 +59398,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59302,6 +59462,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59324,7 +59487,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60461,6 +60627,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "매개변수의 사인 값을 반환합니다."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60491,6 +60662,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "매개변수의 사인 값을 반환합니다."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60532,7 +60708,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65413,21 +65591,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65440,7 +65622,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65469,7 +65651,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65479,22 +65693,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65507,8 +65734,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65706,16 +65935,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74383,7 +74612,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/lt.po b/doc/translations/lt.po
index 79790f5e70..54bc7dd212 100644
--- a/doc/translations/lt.po
+++ b/doc/translations/lt.po
@@ -550,8 +550,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -561,7 +562,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -615,7 +617,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -627,7 +630,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1042,10 +1046,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4856,19 +4865,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4889,21 +4900,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4912,9 +4927,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5566,9 +5582,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5742,8 +5758,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8745,8 +8761,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8797,10 +8814,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9042,12 +9069,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9593,7 +9614,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9754,12 +9780,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9907,6 +9937,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10047,7 +10092,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11725,7 +11773,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11818,7 +11866,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11846,9 +11896,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12345,13 +12395,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12377,8 +12428,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12691,12 +12744,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12741,8 +12794,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12790,8 +12845,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12853,7 +12911,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12978,7 +13036,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15974,7 +16035,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18699,7 +18762,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18848,16 +18913,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19002,18 +19068,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23917,8 +23971,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24538,7 +24596,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26122,10 +26182,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27532,8 +27595,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29833,11 +29896,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30682,7 +30748,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30694,6 +30764,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33051,14 +33131,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33066,21 +33146,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34657,9 +34737,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35118,7 +35198,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36230,7 +36312,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37045,13 +37127,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40715,7 +40809,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46079,7 +46175,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46318,7 +46416,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47047,7 +47147,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49728,8 +49832,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53746,7 +53861,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53890,13 +54007,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55086,7 +55209,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55705,6 +55831,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56039,7 +56173,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57472,7 +57608,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58737,6 +58873,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58798,6 +58937,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58820,7 +58962,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59957,6 +60102,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59986,6 +60135,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60027,7 +60180,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64892,21 +65047,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64919,7 +65078,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64948,7 +65107,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64958,22 +65149,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64986,8 +65190,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65185,16 +65391,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73824,7 +74030,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/lv.po b/doc/translations/lv.po
index 1f63bf69bb..36c46e6754 100644
--- a/doc/translations/lv.po
+++ b/doc/translations/lv.po
@@ -555,8 +555,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -566,7 +567,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -620,7 +622,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -632,7 +635,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1047,10 +1051,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4861,19 +4870,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4894,21 +4905,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4917,9 +4932,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5571,9 +5587,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5747,8 +5763,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8750,8 +8766,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8802,10 +8819,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9047,12 +9074,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9598,7 +9619,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9759,12 +9785,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9912,6 +9942,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10052,7 +10097,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11730,7 +11778,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11823,7 +11871,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11851,9 +11901,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12350,13 +12400,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12382,8 +12433,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12696,12 +12749,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12746,8 +12799,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12795,8 +12850,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12858,7 +12916,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12983,7 +13041,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15979,7 +16040,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18704,7 +18767,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18853,16 +18918,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19007,18 +19073,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23925,8 +23979,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24546,7 +24604,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26130,10 +26190,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27540,8 +27603,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29841,11 +29904,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30690,7 +30756,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30702,6 +30772,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33059,14 +33139,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33074,21 +33154,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34665,9 +34745,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35126,7 +35206,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36238,7 +36320,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37053,13 +37135,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40723,7 +40817,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46087,7 +46183,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46326,7 +46424,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47055,7 +47155,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49736,8 +49840,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53754,7 +53869,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53898,13 +54015,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55094,7 +55217,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55713,6 +55839,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56047,7 +56181,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57480,7 +57616,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58745,6 +58881,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58806,6 +58945,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58828,7 +58970,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59965,6 +60110,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59994,6 +60143,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60035,7 +60188,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64900,21 +65055,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64927,7 +65086,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64956,7 +65115,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64966,22 +65157,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64994,8 +65198,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65193,16 +65399,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73832,7 +74038,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/mr.po b/doc/translations/mr.po
index 32832a4d8f..de37d7ffe8 100644
--- a/doc/translations/mr.po
+++ b/doc/translations/mr.po
@@ -538,8 +538,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -549,7 +550,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -603,7 +605,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -615,7 +618,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1030,10 +1034,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4844,19 +4853,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4877,21 +4888,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4900,9 +4915,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5554,9 +5570,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5730,8 +5746,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8733,8 +8749,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8785,10 +8802,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9030,12 +9057,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9581,7 +9602,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9742,12 +9768,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9895,6 +9925,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10035,7 +10080,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11713,7 +11761,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11806,7 +11854,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11834,9 +11884,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12333,13 +12383,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12365,8 +12416,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12679,12 +12732,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12729,8 +12782,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12778,8 +12833,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12841,7 +12899,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12966,7 +13024,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15962,7 +16023,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18687,7 +18750,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18836,16 +18901,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -18990,18 +19056,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23905,8 +23959,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24526,7 +24584,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26110,10 +26170,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27520,8 +27583,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29821,11 +29884,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30670,7 +30736,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30682,6 +30752,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33039,14 +33119,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33054,21 +33134,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34645,9 +34725,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35106,7 +35186,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36218,7 +36300,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37033,13 +37115,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40703,7 +40797,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46067,7 +46163,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46306,7 +46404,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47035,7 +47135,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49716,8 +49820,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53734,7 +53849,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53878,13 +53995,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55074,7 +55197,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55693,6 +55819,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56027,7 +56161,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57460,7 +57596,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58725,6 +58861,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58786,6 +58925,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58808,7 +58950,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59945,6 +60090,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59974,6 +60123,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60015,7 +60168,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64880,21 +65035,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64907,7 +65066,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64936,7 +65095,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64946,22 +65137,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64974,8 +65178,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65173,16 +65379,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73812,7 +74018,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/nb.po b/doc/translations/nb.po
index 42dca83c45..ffc7df03eb 100644
--- a/doc/translations/nb.po
+++ b/doc/translations/nb.po
@@ -550,8 +550,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -561,7 +562,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -615,7 +617,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -627,7 +630,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1042,10 +1046,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4856,19 +4865,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4889,21 +4900,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4912,9 +4927,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5566,9 +5582,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5742,8 +5758,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8745,8 +8761,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8797,10 +8814,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9042,12 +9069,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9593,7 +9614,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9754,12 +9780,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9907,6 +9937,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10047,7 +10092,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11725,7 +11773,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11818,7 +11866,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11846,9 +11896,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12345,13 +12395,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12377,8 +12428,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12691,12 +12744,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12741,8 +12794,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12790,8 +12845,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12853,7 +12911,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12978,7 +13036,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15974,7 +16035,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18699,7 +18762,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18848,16 +18913,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19002,18 +19068,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23917,8 +23971,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24538,7 +24596,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26122,10 +26182,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27532,8 +27595,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29833,11 +29896,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30682,7 +30748,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30694,6 +30764,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33051,14 +33131,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33066,21 +33146,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34657,9 +34737,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35118,7 +35198,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36230,7 +36312,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37045,13 +37127,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40715,7 +40809,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46079,7 +46175,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46318,7 +46416,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47047,7 +47147,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49728,8 +49832,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53746,7 +53861,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53890,13 +54007,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55086,7 +55209,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55705,6 +55831,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56039,7 +56173,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57472,7 +57608,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58737,6 +58873,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58798,6 +58937,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58820,7 +58962,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59957,6 +60102,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59986,6 +60135,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60027,7 +60180,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64892,21 +65047,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64919,7 +65078,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64948,7 +65107,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64958,22 +65149,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64986,8 +65190,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65185,16 +65391,16 @@ msgid "Unknown error."
 msgstr "Ukjent feil."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73824,7 +74030,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/ne.po b/doc/translations/ne.po
index 0ba02ba939..a4a37692f7 100644
--- a/doc/translations/ne.po
+++ b/doc/translations/ne.po
@@ -538,8 +538,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -549,7 +550,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -603,7 +605,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -615,7 +618,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1030,10 +1034,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4844,19 +4853,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4877,21 +4888,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4900,9 +4915,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5554,9 +5570,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5730,8 +5746,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8733,8 +8749,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8785,10 +8802,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9030,12 +9057,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9581,7 +9602,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9742,12 +9768,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9895,6 +9925,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10035,7 +10080,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11713,7 +11761,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11806,7 +11854,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11834,9 +11884,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12333,13 +12383,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12365,8 +12416,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12679,12 +12732,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12729,8 +12782,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12778,8 +12833,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12841,7 +12899,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12966,7 +13024,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15962,7 +16023,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18687,7 +18750,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18836,16 +18901,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -18990,18 +19056,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23905,8 +23959,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24526,7 +24584,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26110,10 +26170,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27520,8 +27583,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29821,11 +29884,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30670,7 +30736,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30682,6 +30752,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33039,14 +33119,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33054,21 +33134,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34645,9 +34725,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35106,7 +35186,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36218,7 +36300,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37033,13 +37115,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40703,7 +40797,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46067,7 +46163,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46306,7 +46404,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47035,7 +47135,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49716,8 +49820,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53734,7 +53849,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53878,13 +53995,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55074,7 +55197,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55693,6 +55819,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56027,7 +56161,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57460,7 +57596,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58725,6 +58861,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58786,6 +58925,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58808,7 +58950,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59945,6 +60090,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59974,6 +60123,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60015,7 +60168,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64880,21 +65035,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64907,7 +65066,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64936,7 +65095,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64946,22 +65137,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64974,8 +65178,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65173,16 +65379,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73812,7 +74018,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/nl.po b/doc/translations/nl.po
index 3053cadb2b..fbecc31cd7 100644
--- a/doc/translations/nl.po
+++ b/doc/translations/nl.po
@@ -8,12 +8,13 @@
 # Pierre Stempin <pierre.stempin@gmail.com>, 2020.
 # Daan van Luijk <daanvl@outlook.be>, 2021.
 # voylin <0voylin0@gmail.com>, 2022.
+# Gert-dev <qnyasgjhapqyuhoibr@kiabws.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-03-15 01:57+0000\n"
-"Last-Translator: voylin <0voylin0@gmail.com>\n"
+"PO-Revision-Date: 2022-08-06 05:37+0000\n"
+"Last-Translator: Gert-dev <qnyasgjhapqyuhoibr@kiabws.com>\n"
 "Language-Team: Dutch <https://hosted.weblate.org/projects/godot-engine/godot-"
 "class-reference/nl/>\n"
 "Language: nl\n"
@@ -21,7 +22,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.12-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -599,8 +600,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -610,7 +612,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -664,7 +667,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -676,7 +680,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1091,10 +1096,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4913,19 +4923,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4946,21 +4958,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4969,9 +4985,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5623,9 +5640,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5799,8 +5816,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8802,8 +8819,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8854,10 +8872,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9099,12 +9127,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9650,7 +9672,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9811,12 +9838,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9964,6 +9995,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10104,7 +10150,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11782,7 +11831,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11875,7 +11924,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11903,9 +11954,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12402,13 +12453,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12434,8 +12486,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12748,12 +12802,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12798,8 +12852,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12847,8 +12903,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12910,7 +12969,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13035,7 +13094,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16031,7 +16093,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18756,7 +18820,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18905,16 +18971,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19059,18 +19126,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23977,8 +24032,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24598,7 +24657,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26182,10 +26243,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27592,8 +27656,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29893,11 +29957,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30742,7 +30809,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30754,6 +30825,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33111,14 +33192,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33126,21 +33207,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34717,9 +34798,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35178,7 +35259,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36290,7 +36373,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37105,13 +37188,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -37680,7 +37775,7 @@ msgstr ""
 
 #: doc/classes/Node.xml
 msgid "Nodes and Scenes"
-msgstr ""
+msgstr "Noden en scènes"
 
 #: doc/classes/Node.xml
 msgid "All Demos"
@@ -40775,7 +40870,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46139,7 +46236,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46378,7 +46477,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47107,7 +47208,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49788,8 +49893,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53807,7 +53923,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53951,13 +54069,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55147,7 +55271,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55766,6 +55893,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56100,7 +56235,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57533,7 +57670,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58798,6 +58935,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58859,6 +58999,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58881,7 +59024,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60018,6 +60164,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60047,6 +60197,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60088,7 +60242,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64953,21 +65109,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64980,7 +65140,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65009,7 +65169,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65019,22 +65211,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65047,8 +65252,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65246,16 +65453,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73885,7 +74092,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/pl.po b/doc/translations/pl.po
index 729b6a654c..1286b90c40 100644
--- a/doc/translations/pl.po
+++ b/doc/translations/pl.po
@@ -834,8 +834,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -845,7 +846,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -923,7 +925,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -935,7 +938,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Interpoluje liniowo pomiędzy dwoma wartościami poprzez znormalizowaną "
 "wartość. Jest to odwrotność [method inverse_lerp].\n"
@@ -1503,10 +1507,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -5349,19 +5358,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5382,21 +5393,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5406,9 +5421,10 @@ msgstr "Zwraca tangens parametru."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6060,9 +6076,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6237,8 +6253,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -9247,8 +9263,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9299,10 +9316,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9545,12 +9572,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -10096,7 +10117,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10257,12 +10283,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10410,6 +10440,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10550,7 +10595,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12231,7 +12279,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12324,7 +12372,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12352,9 +12402,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12862,13 +12912,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12894,8 +12945,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13208,12 +13261,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13258,8 +13311,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13307,8 +13362,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13370,7 +13428,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13495,7 +13553,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16496,7 +16557,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19227,7 +19290,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19376,16 +19441,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19531,18 +19597,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Zwraca arcus sinus parametru."
@@ -24467,8 +24521,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -25089,7 +25147,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26680,10 +26740,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -28105,8 +28168,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30409,11 +30472,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31259,7 +31325,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31271,6 +31341,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33652,14 +33732,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33667,22 +33747,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Zwraca minimalny kąt w radianach tego wektora."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Liczy iloczyn wektorowy tego wektora oraz [code]b[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Liczy iloczyn wektorowy tego wektora oraz [code]with[/code]."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Liczy iloczyn wektorowy tego wektora oraz [code]b[/code]."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -35264,9 +35348,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35727,7 +35811,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36877,7 +36963,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37708,13 +37794,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41387,7 +41485,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46792,7 +46892,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Liczy iloczyn wektorowy tego wektora oraz [code]with[/code]."
 
 #: doc/classes/PopupMenu.xml
@@ -47031,7 +47133,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47761,7 +47865,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -50442,8 +50550,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54470,7 +54589,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54617,13 +54738,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55813,7 +55940,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -56433,6 +56563,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56767,7 +56905,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -58203,7 +58343,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59470,6 +59610,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59531,6 +59674,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59553,7 +59699,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60690,6 +60839,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Liczy iloczyn wektorowy tego wektora oraz [code]b[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60720,6 +60874,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Liczy iloczyn wektorowy tego wektora oraz [code]b[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60761,7 +60920,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65657,21 +65818,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65684,7 +65849,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65713,7 +65878,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65723,22 +65920,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65751,8 +65961,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65950,16 +66162,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74637,7 +74849,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/pt.po b/doc/translations/pt.po
index c99a8e1cd6..3ad0c8660d 100644
--- a/doc/translations/pt.po
+++ b/doc/translations/pt.po
@@ -10,12 +10,16 @@
 # Diogo Gomes <dgomes@graphnode.com>, 2022.
 # El_ExpertPlayer <xpertnathan37@gmail.com>, 2022.
 # Esdras Caleb Oliveira Silva <acheicaleb@gmail.com>, 2022.
+# Rafael Testa <rafael1testa@gmail.com>, 2022.
+# Lucas Campos <lucas@lcmps.dev>, 2022.
+# Nathan Soares <eu@nathan.com.br>, 2022.
+# Baiterson <baiter160@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-06-29 10:31+0000\n"
-"Last-Translator: Esdras Caleb Oliveira Silva <acheicaleb@gmail.com>\n"
+"PO-Revision-Date: 2022-08-25 13:04+0000\n"
+"Last-Translator: Baiterson <baiter160@gmail.com>\n"
 "Language-Team: Portuguese <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/pt/>\n"
 "Language: pt\n"
@@ -23,7 +27,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -513,6 +517,23 @@ msgid ""
 "want a true content-aware comparison, you have to use [code]deep_equal[/"
 "code]."
 msgstr ""
+"Compara dois valores verificando seu conteúdo real, por meio de recursão em "
+"um [Array] ou [Dictionary] em todos os seus níveis.\n"
+"Esta função se asemelha ou difere de [code]==[/code] de diversas maneiras:\n"
+"- Para [code]null[/code], [code]int[/code], [code]float[/code], "
+"[code]String[/code], [code]Object[/code] e [code] RID[/code] tanto "
+"[code]deep_equal[/code] quanto [code]==[/code] funcionam da mesma forma.\n"
+"- Para [code]Dictionary[/code], [code]==[/code] considera-se igual se, e "
+"somente se, ambas as variáveis apontarem para o mesmo [code]Dictionary[/"
+"code], sem recursão ou checagem de seu conteúdo.\n"
+"- Para [code]Array[/code], [code]==[/code] considera igual se, e somente se, "
+"cada item no primeiro [code]Array[/code] for igual ao seu homólogo no "
+"segundo [ code]Array[/code], conforme informado pelo próprio [code]==[/"
+"code]. Isso implica que [code]==[/code] se faz a recursão em [code]Array[/"
+"code], mas não em [code]Dictionary[/code].\n"
+"Resumindo, sempre que um [code]Dictionary[/code] estiver potencialmente "
+"envolvido, se você quiser uma comparação verdadeira com verificação de "
+"conteúdo, você deve usar [code]deep_equal[/code]."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -802,6 +823,7 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Returns an interpolation or extrapolation factor considering the range "
 "specified in [code]from[/code] and [code]to[/code], and the interpolated "
@@ -809,8 +831,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -820,7 +843,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "Returna um fator de interpolação ou extrapolação considerando o alcance "
 "especifico em [code]from[/code] e [code]to[/code], e o valor interpolado "
@@ -908,12 +932,14 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Linearly interpolates between two values by the factor defined in "
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -925,7 +951,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Interpola linearmente entre dois valores pelo fator definido em "
 "[code]weight[/code]. Para realizar a interpolação, [code]weight[/code] deve "
@@ -1340,7 +1367,6 @@ msgstr ""
 "rastreamento de pilha quando um erro ou aviso é impresso ."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Like [method print], but includes the current stack frame when running with "
 "the debugger turned on.\n"
@@ -1350,11 +1376,12 @@ msgid ""
 "   At: res://test.gd:15:_process()\n"
 "[/codeblock]"
 msgstr ""
-"Imprime a pilha de chamadas no local do código, só funciona com o depurador "
-"ativado.\n"
-"Saída no console vai parecer assim:\n"
+"Similar à [method print], mas inclui a pilha de chamadas no local do código "
+"quando o depurador esta ativado.\n"
+"A saída no console será exibida da seguinte maneira:\n"
 "[codeblock]\n"
-"Frame 0 - res://test.gd:16 in function '_process'\n"
+"Test print\n"
+"   At: res://test.gd:15:_process()\n"
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1607,20 +1634,59 @@ msgid ""
 "3\n"
 "[/codeblock]"
 msgstr ""
+"Retorna um [Array] com o intervalo fornecido. [method range] pode ser "
+"invocado de três maneiras:\n"
+"- [code]range(n: int)[/code]: inicia em 0, incrementa 1 passo até parar "
+"[i]antes[/i] de [code]n[/code]. O argumento [code]n[/code] é [b]exclusivo[/"
+"b].\n"
+"[código]intervalo(b: int, n: int)[/código]: inicia em [código]b[/código], "
+"incrementa 1 passo até parar [i]antes[/i] de [code]n[/code]. Os argumentos "
+"[code]b[/code] e [code]n[/code] são [b]inclusivo[/b] e [b]exclusivo[/b], "
+"respectivamente.\n"
+"- [code]range(b: int, n: int, s: int)[/code]: inicia em [code]b[/code], "
+"aumenta/diminui [code]s[/code] passos até parar [i]antes[/i] de [code]n[/"
+"code]. Os argumentos [code]b[/code] e [code]n[/code] são [b]inclusivo[/b] e "
+"[b]exclusivo[/b], respectivamente. O argumento [code]s[/code] [b]pode[/b] "
+"ser negativo, mas não [code]0[/code]. Se [code]s[/code] for [code]0[/code], "
+"uma mensagem de erro será exibida.\n"
+"- [method range] converte todos os argumentos em [int] antes do "
+"processamento.\n"
+"[b]Observação:[/b] Retorna uma matriz vazia se nenhum valor atender às "
+"restrições do intervalo (por exemplo, [code]range(2, 5, -1)[/code] ou "
+"[code]range(5, 5, 1)[/code]).\n"
+"Exemplos:\n"
+"[codeblock]\n"
+"print(range(4))        # Escreve [0, 1, 2, 3]\n"
+"print(range(2, 5))     # Escreve [2, 3, 4]\n"
+"print(range(0, 6, 2))  # Escreve [0, 2, 4]\n"
+"print(range(4, 1, -1)) # Escreve [4, 3, 2]\n"
+"[/codeblock]\n"
+"Para iterar sobre um [Array] para trás, use:\n"
+"[codeblock]\n"
+"var array = [3, 6, 9]\n"
+"for i in range(array.size(), 0, -1):\n"
+"    print(array[i - 1])\n"
+"[/codeblock]\n"
+"Saída:\n"
+"[codeblock]\n"
+"9\n"
+"6\n"
+"3\n"
+"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Mapeia um [code]value[/code] do intervalo [code][istart, istop][/code] para "
-"o intervalo [code][ostart, ostop][/code].\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Retorna 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1633,6 +1699,14 @@ msgid ""
 "[/codeblock]\n"
 "See also [method floor], [method ceil], [method stepify], and [int]."
 msgstr ""
+"Arredonda [code]s[/code] para o número inteiro mais próximo, com a metade "
+"arredondada para cima.\n"
+"[codeblock]\n"
+"a = round(2.49) # a is 2.0\n"
+"a = round(2.5) # a is 3.0\n"
+"a = round(2.51) # a is 3.0\n"
+"[/codeblock]\n"
+"Veja também[method floor], [method ceil], [method stepify], e [int]."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1717,6 +1791,29 @@ msgid ""
 "smoothstep_ease_comparison.png]Comparison between smoothstep() and ease(x, "
 "-1.6521) return values[/url]"
 msgstr ""
+"Retorna o resultado da interpolação suave do valor de [code]s[/code] entre "
+"[code]0[/code] e [code]1[/code], na qual [code]s[/code] se encontra incluso "
+"no intervalo dos limites [code]from[/code] e [code]to[/code].\n"
+"O valor de retornado é [code]0[/code] se [code]s <= from[/code], e [code]1[/"
+"code] se [code]s >= to[/code]. Se [code]s[/code] estiver entre [code]from[/"
+"code] e [code]to[/code], o valor retornado segue uma curva em forma de S que "
+"mapeia [code]s[/code] entre [ code]0[/code] e [code]1[/code].\n"
+"Esta curva em forma de S é o interpolador cúbico de Hermite, dado por "
+"[code]f(y) = 3*y^2 - 2*y^3[/code] na qual [code]y = (x-from) / (to -from)[/"
+"code].\n"
+"[codeblock]\n"
+"smoothstep(0, 2, -5.0) # Retorna 0.0\n"
+"smoothstep(0, 2, 0.5) # Retorna 0.15625\n"
+"smoothstep(0, 2, 1.0) # Retorna 0.5\n"
+"smoothstep(0, 2, 2.0) # Retorna 1.0\n"
+"[/codeblock]\n"
+"Comparado [method ease] com um valor de curva de [code]-1.6521[/code], "
+"[method smoothstep] retorna a curva mais suave possível sem mudanças "
+"repentinas na derivada. Se você precisar realizar transições mais avançadas, "
+"use [Tween] ou [AnimationPlayer].\n"
+"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.5/img/"
+"smoothstep_ease_comparison.png]Comparação entre os valores retornados por "
+"smoothstep() e ease(x, -1.6521)[/url]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1728,8 +1825,17 @@ msgid ""
 "[b]Note:[/b] Negative values of [code]s[/code] return NaN. If you need "
 "negative inputs, use [code]System.Numerics.Complex[/code] in C#."
 msgstr ""
+"Retorna a raiz quadrada de [code]s[/code], onde [code]s[/code] é um número "
+"não-negativo.\n"
+"[codeblock]\n"
+"sqrt(9) # Retorna 3\n"
+"[/codeblock]\n"
+"[b]Nota:[/b] Valores negativos de [code]s[/code] retornam NaN. Se você "
+"necessita de inputs negativos, use [code]System.Numerics.Complex[/code] em "
+"C#."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Returns the position of the first non-zero digit, after the decimal point. "
 "Note that the maximum return value is 10, which is a design decision in the "
@@ -1740,6 +1846,14 @@ msgid ""
 "n = step_decimals(0.000000005) # n is 9\n"
 "[/codeblock]"
 msgstr ""
+"Retorna a posição do primeiro dígito diferente de 0 após o ponto decimal. "
+"Note que o valor máximo retornado é 10, que é uma decisão de design na "
+"implementação.\n"
+"[codeblock]\n"
+"n = step_decimals(5)           # n é 0\n"
+"n = step_decimals(1.0005)      # n é 4\n"
+"n = step_decimals(0.000000005) # n é 9\n"
+"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1752,6 +1866,14 @@ msgid ""
 "[/codeblock]\n"
 "See also [method ceil], [method floor], [method round], and [int]."
 msgstr ""
+"Fixa valor flutuante [code]s[/code] para um dado [code]step[/code]. Também "
+"pode ser usado para arredondar um número flutuante para um número arbitrário "
+"de decimais.\n"
+"[codeblock]\n"
+"stepify(100, 32) # Retorna 96.0\n"
+"stepify(3.14159, 0.01) # Retorna 3.14\n"
+"[/codeblock]\n"
+"Veja também [method ceil], [method floor], [method round], e [int]."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1764,6 +1886,14 @@ msgid ""
 "len(b) # Returns 12\n"
 "[/codeblock]"
 msgstr ""
+"Converte um ou mais argumentos de quaisquer tipos para string na melhor "
+"maneira possível.\n"
+"[codeblock]\n"
+"var a = [10, 20, 30]\n"
+"var b = str(a);\n"
+"len(a) # Retorna 3\n"
+"len(b) # Retorna 12\n"
+"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1803,6 +1933,11 @@ msgid ""
 "b = tanh(a)  # b is 0.6\n"
 "[/codeblock]"
 msgstr ""
+"Retorna a tangente hiperbólica de [code]s[/code].\n"
+"[codeblock]\n"
+"a = log(2.0) # a é 0.693147\n"
+"b = tanh(a)  # b é 0.6\n"
+"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1845,6 +1980,11 @@ msgid ""
 "type_exists(\"Variant\") # Returns false\n"
 "[/codeblock]"
 msgstr ""
+"Retorna se uma dada classe existe em [ClassDB].\n"
+"[codeblock]\n"
+"type_exists(\"Sprite\") # Retorna true\n"
+"type_exists(\"Variant\") # Retorna false\n"
+"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -2177,16 +2317,22 @@ msgid "Global scope constants and variables."
 msgstr "Constantes e variáveis de escopo global."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid ""
 "Global scope constants and variables. This is all that resides in the "
 "globals, constants regarding error codes, scancodes, property hints, etc.\n"
 "Singletons are also documented here, since they can be accessed from "
 "anywhere."
 msgstr ""
+"Constante e variáveis de escopo global. É tudo aquilo que reside no escopo "
+"global, constantes relacionadas a códigos de erro, scancodes, dicas de "
+"propriedades, etc.\n"
+"Singletons também estão documentados aqui, uma vez que podem ser acessados "
+"de qualquer lugar."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [ARVRServer] singleton."
-msgstr ""
+msgstr "O singleton [ARVRServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [AudioServer] singleton."
@@ -2206,7 +2352,7 @@ msgstr "O singleton [Engine]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [Geometry] singleton."
-msgstr ""
+msgstr "O singleton [Geometry]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [IP] singleton."
@@ -2245,19 +2391,16 @@ msgid "The [Marshalls] singleton."
 msgstr "O singleton [Marshalls]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [Navigation2DServer] singleton."
-msgstr "O singleton [TranslationServer]."
+msgstr "O singleton [Navigation2DServer]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [NavigationMeshGenerator] singleton."
-msgstr "O singleton [TranslationServer]."
+msgstr "O singleton [NavigationMeshGenerator]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [NavigationServer] singleton."
-msgstr "O singleton [TranslationServer]."
+msgstr "O singleton [NavigationServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [OS] singleton."
@@ -2269,11 +2412,11 @@ msgstr "O singleton [Performance]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [Physics2DServer] singleton."
-msgstr ""
+msgstr "O singleton [Physics2DServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [PhysicsServer] singleton."
-msgstr ""
+msgstr "O singleton [PhysicsServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [ProjectSettings] singleton."
@@ -2289,7 +2432,7 @@ msgstr "O singleton [ResourceSaver]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [Time] singleton."
-msgstr ""
+msgstr "O singleton [Time]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [TranslationServer] singleton."
@@ -2301,7 +2444,7 @@ msgstr "O singleton [VisualScriptEditor]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [VisualServer] singleton."
-msgstr ""
+msgstr "O singleton [VisualServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Left margin, usually used for [Control] or [StyleBox]-derived classes."
@@ -2393,7 +2536,7 @@ msgstr ""
 
 #: doc/classes/@GlobalScope.xml
 msgid "Scancodes with this bit applied are non-printable."
-msgstr ""
+msgstr "Scancodes com este bit aplicado não são printáveis."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Escape key."
@@ -2405,7 +2548,7 @@ msgstr "Tecla Tab."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Shift+Tab key."
-msgstr ""
+msgstr "Tecla Shift+Tab."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Backspace key."
@@ -2665,8 +2808,9 @@ msgid ""
 msgstr "Tecla Voltar Media. Não confundir com tecla Voltar no device Android."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "Media forward key."
-msgstr ""
+msgstr "Tecla avançar Mídia."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Media stop key."
@@ -2674,7 +2818,7 @@ msgstr "Tecla de parada de mídia."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Media refresh key."
-msgstr ""
+msgstr "Tecla repetir Mídia."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Volume down key."
@@ -3565,6 +3709,11 @@ msgid ""
 "- Linux: Up to 80 buttons.\n"
 "- Windows and macOS: Up to 128 buttons."
 msgstr ""
+"O número máximo de botões de controle suportados pela engine. O limite poder "
+"ser menor em plataformas específicas:\n"
+"- Android: Até 36 botões.\n"
+"- Linux: Até 80 botões.\n"
+"- Windows e macOS: Até 128 botões."
 
 #: doc/classes/@GlobalScope.xml
 msgid "DualShock circle button."
@@ -3584,35 +3733,35 @@ msgstr "Botão triângulo do Dualshock."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Xbox controller B button."
-msgstr ""
+msgstr "Botão B do controle de Xbox."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Xbox controller A button."
-msgstr ""
+msgstr "Botão A do controle de Xbox."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Xbox controller X button."
-msgstr ""
+msgstr "Botão X do controle de Xbox."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Xbox controller Y button."
-msgstr ""
+msgstr "Botão Y do controle de Xbox."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Nintendo controller A button."
-msgstr ""
+msgstr "Botão A do controle da Nintendo."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Nintendo controller B button."
-msgstr ""
+msgstr "Botão B do controle da Nintendo."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Nintendo controller X button."
-msgstr ""
+msgstr "Botão X do controle da Nintendo."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Nintendo controller Y button."
-msgstr ""
+msgstr "Botão Y do controle da Nintendo."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Grip (side) buttons on a VR controller."
@@ -3678,35 +3827,36 @@ msgstr "Botão direito no direcional do controle."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad SDL guide button."
-msgstr ""
+msgstr "Botão guia do controle SDL."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad SDL miscellaneous button."
 msgstr "Botão diverso SDL do controle."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "Gamepad SDL paddle 1 button."
-msgstr ""
+msgstr "Botão paddle 1 do controle SDL."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad SDL paddle 2 button."
-msgstr ""
+msgstr "Botão paddle 2 do controle SDL."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad SDL paddle 3 button."
-msgstr ""
+msgstr "Botão paddle 3 do controle SDL."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad SDL paddle 4 button."
-msgstr ""
+msgstr "Botão paddle 4 do controle SDL."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad SDL touchpad button."
-msgstr ""
+msgstr "Touchpad do controle SDL."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad left Shoulder button."
-msgstr ""
+msgstr "Touchpad botão L1."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad left trigger."
@@ -3718,7 +3868,7 @@ msgstr "Clique na alavanca esquerda do controle."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad right Shoulder button."
-msgstr ""
+msgstr "Touchpad botão L2."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Gamepad right trigger."
@@ -3785,8 +3935,9 @@ msgid "VR Controller analog trigger."
 msgstr "Gatilho analógico do controle VR."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "VR Controller analog grip (side buttons)."
-msgstr ""
+msgstr "VR Controle analógico (botões laterais)"
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
@@ -3809,30 +3960,38 @@ msgid ""
 "MIDI note OFF message. See the documentation of [InputEventMIDI] for "
 "information of how to use MIDI inputs."
 msgstr ""
+"MIDI nota OFF mensagem. Ver na documentação [InputEventMIDI] como usar."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
 "MIDI note ON message. See the documentation of [InputEventMIDI] for "
 "information of how to use MIDI inputs."
-msgstr ""
+msgstr "MIDI nota ON mensagem. Ver na documentação [InputEventMIDI] como usar."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
 "MIDI aftertouch message. This message is most often sent by pressing down on "
 "the key after it \"bottoms out\"."
 msgstr ""
+"MIDI aftertouch mensagem. Essa mensagem é mais enviada quando pressionada a "
+"tecla e depois de \"bottons out\"."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid ""
 "MIDI control change message. This message is sent when a controller value "
 "changes. Controllers include devices such as pedals and levers."
 msgstr ""
+"MIDI control change mensagem. Essa mensagem é enviada quando um valor de um "
+"controle muda. Controles do tipo pedais e alavancas."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
 "MIDI program change message. This message sent when the program patch number "
 "changes."
 msgstr ""
+"MIDI program change message. Essa mensagem é enviada quando o número de um "
+"patch de um programa."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
@@ -3925,6 +4084,19 @@ msgid ""
 "    print(\"Still failing!\")\n"
 "[/codeblock]"
 msgstr ""
+"Métodos que retornam [enum Error] retornam [constant OK] quando nenhum erro "
+"ocorre. Note que muitas funções não retornam um código de erro, mas "
+"imprimirão mensagens de erro na saída padrão.\n"
+"Uma vez que [constant OK] tem valor 0 e todos os outros códigos de erro são "
+"inteiros positivos, também pode ser usado em uma checagem booleana, ex:\n"
+"[codeblock]\n"
+"var err = method_that_returns_error()\n"
+"if err != OK:\n"
+"    print(\"Failure!\")\n"
+"# Ou o equivalente:\n"
+"if err:\n"
+"    print(\"Still failing!\")\n"
+"[/codeblock]"
 
 #: doc/classes/@GlobalScope.xml
 msgid "Generic error."
@@ -3932,31 +4104,34 @@ msgstr "Erro genérico."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Unavailable error."
-msgstr ""
+msgstr "Erro não disponível."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Unconfigured error."
-msgstr ""
+msgstr "Erro não configurado."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Unauthorized error."
-msgstr ""
+msgstr "Erro não autorizado."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "Parameter range error."
-msgstr ""
+msgstr "Erro de intervalo de parâmetro."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Out of memory (OOM) error."
-msgstr ""
+msgstr "Erro de falta de memória (OOM)."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "File: Not found error."
-msgstr ""
+msgstr "Arquivo: Erro de arquivo não encontrado."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "File: Bad drive error."
-msgstr ""
+msgstr "Arquivo: Erro unidade defeituosa."
 
 #: doc/classes/@GlobalScope.xml
 msgid "File: Bad path error."
@@ -3971,24 +4146,29 @@ msgid "File: Already in use error."
 msgstr "Ficheiro: Erro ficheiro já em uso."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "File: Can't open error."
-msgstr ""
+msgstr "Arquivo: Erro não foi possível abrir."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "File: Can't write error."
-msgstr ""
+msgstr "Arquivo: Erro não foi possível escrever."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "File: Can't read error."
-msgstr ""
+msgstr "Arquivo: Erro não foi possível ler."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "File: Unrecognized error."
-msgstr ""
+msgstr "Arquivo: Erro não reconhecido."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "File: Corrupt error."
-msgstr ""
+msgstr "Arquivo: Erro corrompido."
 
 #: doc/classes/@GlobalScope.xml
 msgid "File: Missing dependencies error."
@@ -3996,27 +4176,28 @@ msgstr "Ficheiro: Erro faltam dependências."
 
 #: doc/classes/@GlobalScope.xml
 msgid "File: End of file (EOF) error."
-msgstr ""
+msgstr "Arquivo: Erro fim do arquivo (EOF)."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Can't open error."
-msgstr ""
+msgstr "Erro não foi possível abrir."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Can't create error."
-msgstr ""
+msgstr "Erro não foi possível criar."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Query failed error."
-msgstr ""
+msgstr "Erro falha na consulta."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Already in use error."
-msgstr ""
+msgstr "Erro já está sendo utilizado."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "Locked error."
-msgstr ""
+msgstr "Erro Bloqueado (Locked error)."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Timeout error."
@@ -4024,7 +4205,7 @@ msgstr ""
 
 #: doc/classes/@GlobalScope.xml
 msgid "Can't connect error."
-msgstr ""
+msgstr "Erro não foi possível conectar."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Can't resolve error."
@@ -4036,15 +4217,15 @@ msgstr "Erro de conexão."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Can't acquire resource error."
-msgstr ""
+msgstr "Erro não foi possível adquirir o recurso."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Can't fork process error."
-msgstr ""
+msgstr "Erro não foi possível dividir o processo."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Invalid data error."
-msgstr ""
+msgstr "Erro dados inválidos."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Invalid parameter error."
@@ -4079,8 +4260,9 @@ msgid "Linking failed error."
 msgstr ""
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "Script failed error."
-msgstr ""
+msgstr "Erro falha no script."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Cycling link (import cycle) error."
@@ -4095,8 +4277,9 @@ msgid "Duplicate symbol error."
 msgstr "Erro de símbolo duplicado."
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid "Parse error."
-msgstr ""
+msgstr "Erro de parse."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Busy error."
@@ -4112,13 +4295,15 @@ msgstr "Erro de ajuda."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Bug error."
-msgstr ""
+msgstr "Erro bug."
 
 #: doc/classes/@GlobalScope.xml
 msgid ""
 "Printer on fire error. (This is an easter egg, no engine methods return this "
 "error code.)"
 msgstr ""
+"Erro impressora em chamas. (Isso é um easter egg, nenhum método da engine "
+"retornará esse código de erro.)"
 
 #: doc/classes/@GlobalScope.xml
 msgid "No hint for the edited property."
@@ -4165,12 +4350,17 @@ msgid ""
 msgstr ""
 
 #: doc/classes/@GlobalScope.xml
+#, fuzzy
 msgid ""
 "Hints that a float property should be edited via an exponential easing "
 "function. The hint string can include [code]\"attenuation\"[/code] to flip "
 "the curve horizontally and/or [code]\"inout\"[/code] to also include in/out "
 "easing."
 msgstr ""
+"Sugere que uma propriedade float deve ser editada através de uma função de "
+"suavização. A string de sugestão pode incluir [code]\"attenuation\"[/code] "
+"para virar a curva horizontalmente e/ou [code]\"inout\"[/code] para incluir "
+"também a suavização in/out."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Deprecated hint, unused."
@@ -5666,19 +5856,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5699,21 +5891,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5723,9 +5919,10 @@ msgstr "Retorna o RID do ecrã usada por essa camada."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6384,9 +6581,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6560,8 +6757,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -9563,8 +9760,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9615,10 +9813,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9860,12 +10068,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr "Poder de distorção. O valor pode variar de 0 a 1."
@@ -10411,7 +10613,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10572,12 +10779,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10725,6 +10936,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10865,7 +11091,10 @@ msgstr "Reproduz um som posicional em espaço 2D."
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12548,7 +12777,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12641,7 +12870,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12669,9 +12900,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -13171,13 +13402,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -13203,8 +13435,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13517,12 +13751,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13567,8 +13801,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13616,8 +13852,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13683,7 +13922,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13819,10 +14058,12 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
-"Define que a camada irá seguir a janela para simular um efeito pseudo-3D."
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
@@ -16831,7 +17072,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19568,7 +19811,9 @@ msgstr "Uma curva matemática."
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19717,16 +19962,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19871,18 +20117,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -24797,8 +25031,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -25420,7 +25658,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -27008,10 +27248,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -28419,8 +28662,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30720,11 +30963,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31573,7 +31819,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31585,6 +31835,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33954,14 +34214,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33969,22 +34229,28 @@ msgid "Removes all points from the line."
 msgstr "Remove todos os pontos da linha."
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+#, fuzzy
+msgid "Returns the amount of points in the line."
 msgstr "Retorna a quantidade de pontos de uma Line2D."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Retorna o tipo do nó em at [code]idx[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Retorna o tipo do nó em at [code]idx[/code]."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
+"Retorna [code]true[/code] se a guia no índice [code]tab_idx[/code] estiver "
+"oculta."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -35562,9 +35828,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -36024,7 +36290,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -37160,7 +37428,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37985,13 +38253,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -38559,6 +38839,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Node.xml
+#, fuzzy
 msgid "Nodes and Scenes"
 msgstr "Nós e Cenas"
 
@@ -41657,7 +41938,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -47026,7 +47309,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Retorna o nome do nó em [code]idx[/code]."
 
 #: doc/classes/PopupMenu.xml
@@ -47266,7 +47551,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47995,7 +48282,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -50739,8 +51030,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54758,7 +55060,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54902,13 +55206,19 @@ msgstr "A cena atual."
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -56101,7 +56411,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -56721,6 +57034,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -57055,7 +57376,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -58506,7 +58829,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59773,6 +60096,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59834,6 +60160,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59856,7 +60185,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60995,6 +61327,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Retorna o tipo do nó em at [code]idx[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -61024,6 +61361,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Retorna o tipo do nó em at [code]idx[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -61065,8 +61407,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+#, fuzzy
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
+"Emitido quando um botão personalizado é pressionado. Veja [method "
+"add_button]."
 
 #: doc/classes/Tabs.xml
 msgid "Emitted when a tab is clicked, even if it is the current tab."
@@ -65948,21 +66295,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65975,7 +66326,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -66004,7 +66355,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -66014,22 +66397,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -66042,8 +66438,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -66241,16 +66639,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74893,7 +75291,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/pt_BR.po b/doc/translations/pt_BR.po
index ea624fdf2c..62d868632e 100644
--- a/doc/translations/pt_BR.po
+++ b/doc/translations/pt_BR.po
@@ -19,7 +19,7 @@
 # Lucas E. <lukas.ed45@gmail.com>, 2021.
 # Júlio César <diolandajr@gmail.com>, 2021, 2022.
 # Kett Lovahr <vagnerlunes@gmail.com>, 2021.
-# Jaide Alonso Ambrosio <jaide.sp@gmail.com>, 2021.
+# Jaide Alonso Ambrosio <jaide.sp@gmail.com>, 2021, 2022.
 # DeeJayLSP <djlsplays@gmail.com>, 2021.
 # Douglas Leão <djlsplays@gmail.com>, 2021.
 # Cauê Henrique Sousa Ferrareto <caue313@gmail.com>, 2021.
@@ -42,12 +42,13 @@
 # Daniel Abrante <danielabrante@protonmail.com>, 2022.
 # lucas rossy brasil coelho <lucasrossy270@gmail.com>, 2022.
 # Felipe Kinoshita <kinofhek@gmail.com>, 2022.
+# Mr.Albino <ricmorsoleto@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-08-04 06:40+0000\n"
-"Last-Translator: Felipe Kinoshita <kinofhek@gmail.com>\n"
+"PO-Revision-Date: 2022-08-21 06:02+0000\n"
+"Last-Translator: Jaide Alonso Ambrosio <jaide.sp@gmail.com>\n"
 "Language-Team: Portuguese (Brazil) <https://hosted.weblate.org/projects/"
 "godot-engine/godot-class-reference/pt_BR/>\n"
 "Language: pt_BR\n"
@@ -853,6 +854,7 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Returns an interpolation or extrapolation factor considering the range "
 "specified in [code]from[/code] and [code]to[/code], and the interpolated "
@@ -860,8 +862,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -871,7 +874,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "Retornar a interpolação ou extrapolação do fator considerando o ranger "
 "específico [code ]para[/code]"
@@ -945,12 +949,14 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Linearly interpolates between two values by the factor defined in "
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -962,7 +968,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Interpola linearmente entre dois valores pelo fator definido em "
 "[code]weight[/code]. Para realizar a interpolação, [code]weight[/code] deve "
@@ -1642,16 +1649,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Mapeia um [code]value[/code] do intervalo [code][istart, istop][/code] para "
-"o intervalo [code][ostart, ostop][/code].\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Retorna 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -5886,19 +5893,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5919,21 +5928,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5943,9 +5956,10 @@ msgstr "Retorna a tangente do parâmetro."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6604,9 +6618,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6781,8 +6795,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -9800,8 +9814,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9852,10 +9867,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -10099,12 +10124,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr "Poder de distorção. O valor pode variar de 0 a 1."
@@ -10650,7 +10669,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10811,12 +10835,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10964,6 +10992,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -11104,7 +11147,10 @@ msgstr "Reproduz um som posicional em espaço 2D."
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12789,7 +12835,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12882,7 +12928,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12910,9 +12958,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -13418,13 +13466,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -13450,8 +13499,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13764,12 +13815,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13814,8 +13865,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13863,8 +13916,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13930,7 +13986,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14067,10 +14123,12 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
-"Define que a camada irá seguir a janela para simular um efeito pseudo-3D."
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
@@ -17121,7 +17179,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19858,7 +19918,9 @@ msgstr "Uma curva matemática."
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -20007,16 +20069,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -20162,18 +20225,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Retorna o arco-seno do parâmetro."
@@ -25100,8 +25151,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -25723,7 +25778,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -27315,10 +27372,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -28748,8 +28808,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -31054,11 +31114,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31908,7 +31971,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31920,6 +31987,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -34300,14 +34377,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34315,22 +34392,27 @@ msgid "Removes all points from the line."
 msgstr "Remove todos os pontos da linha."
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+#, fuzzy
+msgid "Returns the amount of points in the line."
 msgstr "Retorna a quantidade de pontos de uma Line2D."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Retorna o tipo do nó em at [code]idx[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Retorna o nome do nó em [code]idx[/code]."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
+"Retorna a largura em píxeis de [code]wrap_index[/code] em [code]line[/code]."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -35909,9 +35991,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -36372,7 +36454,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -37520,7 +37604,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -38354,13 +38438,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -42032,7 +42128,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -47441,7 +47539,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Retorna o nome do nó em [code]idx[/code]."
 
 #: doc/classes/PopupMenu.xml
@@ -47682,7 +47782,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -48412,7 +48514,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -51094,8 +51200,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -55122,7 +55239,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55266,13 +55385,19 @@ msgstr "A cena atual."
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -56466,7 +56591,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -57088,6 +57216,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -57422,7 +57558,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -58876,7 +59014,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -60143,6 +60281,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -60204,6 +60345,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -60226,7 +60370,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -61365,6 +61512,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Retorna o tipo do nó em at [code]idx[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -61395,6 +61547,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Retorna o tipo do nó em at [code]idx[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -61436,8 +61593,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+#, fuzzy
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
+"Emitido quando um botão personalizado é pressionado. Veja [method "
+"add_button]."
 
 #: doc/classes/Tabs.xml
 msgid "Emitted when a tab is clicked, even if it is the current tab."
@@ -66347,21 +66509,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -66374,7 +66540,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -66403,7 +66569,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -66413,22 +66611,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -66441,8 +66652,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -66640,16 +66853,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -75332,7 +75545,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
@@ -76712,6 +76927,8 @@ msgid ""
 "Skips the current section. If the node contains other elements, they will be "
 "ignored and the cursor will go to the closing of the current element."
 msgstr ""
+"Pula a seção atual. Se o nó contêm outros elementos, eles serão ignorados e "
+"o cursor irá para o encerramento do elemento atual."
 
 #: doc/classes/XMLParser.xml
 msgid "There's no node (no file or buffer opened)."
diff --git a/doc/translations/ro.po b/doc/translations/ro.po
index 332dbd0801..b0a4b2085c 100644
--- a/doc/translations/ro.po
+++ b/doc/translations/ro.po
@@ -566,8 +566,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -577,7 +578,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -631,7 +633,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -643,7 +646,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1058,10 +1062,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4876,19 +4885,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4909,21 +4920,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4932,9 +4947,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5586,9 +5602,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5762,8 +5778,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8765,8 +8781,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8817,10 +8834,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9062,12 +9089,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9613,7 +9634,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9774,12 +9800,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9927,6 +9957,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10067,7 +10112,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11745,7 +11793,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11838,7 +11886,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11866,9 +11916,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12365,13 +12415,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12397,8 +12448,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12711,12 +12764,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12761,8 +12814,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12810,8 +12865,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12873,7 +12931,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12998,7 +13056,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15994,7 +16055,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18719,7 +18782,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18868,16 +18933,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19022,18 +19088,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23940,8 +23994,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24561,7 +24619,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26145,10 +26205,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27555,8 +27618,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29856,11 +29919,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30705,7 +30771,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30717,6 +30787,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33074,14 +33154,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33089,21 +33169,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34680,9 +34760,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35141,7 +35221,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36253,7 +36335,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37069,13 +37151,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40739,7 +40833,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46103,7 +46199,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46342,7 +46440,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47071,7 +47171,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49752,8 +49856,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53770,7 +53885,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53914,13 +54031,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55110,7 +55233,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55729,6 +55855,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56063,7 +56197,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57496,7 +57632,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58761,6 +58897,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58822,6 +58961,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58844,7 +58986,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59981,6 +60126,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60010,6 +60159,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60051,7 +60204,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64916,21 +65071,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64943,7 +65102,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64972,7 +65131,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64982,22 +65173,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65010,8 +65214,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65209,16 +65415,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73848,7 +74054,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/ru.po b/doc/translations/ru.po
index b148868ce6..7355406513 100644
--- a/doc/translations/ru.po
+++ b/doc/translations/ru.po
@@ -5,7 +5,7 @@
 #
 # Alex <Alex.Gorichev@protonmail.com>, 2020.
 # Nikita <Kulacnikita@ya.ru>, 2020.
-# Алексей Смирнов <tir74@mail.ru>, 2020, 2021.
+# Алексей Смирнов <tir74@mail.ru>, 2020, 2021, 2022.
 # Chaosus89 <chaosus89@gmail.com>, 2020.
 # John Smith <19georginos97@gmail.com>, 2020.
 # NeoLan Qu <it.bulla@mail.ru>, 2020.
@@ -50,21 +50,23 @@
 # МАН69К <weblate@mah69k.net>, 2022.
 # Vadim Mitroshkin <Vadim7540@yandex.ru>, 2022.
 # SonicStalker Games <dmitriyusolsev1971@gmail.com>, 2022.
+# Kedr <lava20121991@gmail.com>, 2022.
+# Lost Net <pc.mirkn@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-08-04 06:40+0000\n"
-"Last-Translator: SonicStalker Games <dmitriyusolsev1971@gmail.com>\n"
+"PO-Revision-Date: 2022-08-28 00:17+0000\n"
+"Last-Translator: Алексей Смирнов <tir74@mail.ru>\n"
 "Language-Team: Russian <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/ru/>\n"
 "Language: ru\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
-"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
+"n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -862,6 +864,7 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Returns an interpolation or extrapolation factor considering the range "
 "specified in [code]from[/code] and [code]to[/code], and the interpolated "
@@ -869,8 +872,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -880,7 +884,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "Возвращает коэффициент интерполяции или экстраполяции с учетом диапазона, "
 "указанного в [code]от[/code] и [code]до[/code], и интерполированное "
@@ -972,12 +977,14 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Linearly interpolates between two values by the factor defined in "
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -989,7 +996,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Линейно интерполирует между двумя значениями с помощью коэффициента, "
 "определенного в [code]weight[/code]. Для выполнения интерполяции [code]вес[/"
@@ -1714,16 +1722,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"Сопоставляет [code]value[/code] из диапазона [code][istart, istop][/code] в "
-"[code][ostart, ostop][/code].\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Возвращает 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -1849,13 +1857,13 @@ msgstr ""
 "smoothstep(0, 2, 2.0) # Returns 1.0\n"
 "[/codeblock]\n"
 "\n"
-"Compared to [method ease] with a curve value of [code]-1.6521[/code], ["
-"method smoothstep] returns the smoothest possible curve with no sudden "
+"Compared to [method ease] with a curve value of [code]-1.6521[/code], "
+"[method smoothstep] returns the smoothest possible curve with no sudden "
 "changes in the derivative. If you need to perform more advanced transitions, "
 "use [Tween] or [AnimationPlayer].\n"
 "[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.5/img/"
-"smoothstep_ease_comparison.png]Comparison between smoothstep() and ease(x, -1"
-".6521) return values[/url]"
+"smoothstep_ease_comparison.png]Comparison between smoothstep() and ease(x, "
+"-1.6521) return values[/url]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 #, fuzzy
@@ -1902,7 +1910,6 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Snaps float value [code]s[/code] to a given [code]step[/code]. This can also "
 "be used to round a floating point number to an arbitrary number of "
@@ -1919,10 +1926,10 @@ msgstr ""
 "[codeblock]\n"
 "stepify(100, 32) # Возвращает 96\n"
 "stepify(3.14159, 0.01) # Возвращает 3.14\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"Смотрите также [method ceil], [method floor], [method round], и [int]."
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Converts one or more arguments of any type to string in the best way "
 "possible.\n"
@@ -1933,8 +1940,8 @@ msgid ""
 "len(b) # Returns 12\n"
 "[/codeblock]"
 msgstr ""
-"Преобразует один или более аргументов в строку наилучшим возможным "
-"образом. \n"
+"Преобразует один или несколько аргументов любого типа в строку наилучшим из "
+"возможных способов.\n"
 "[codeblock]\n"
 "var a = [10, 20, 30]\n"
 "var b = str(a);\n"
@@ -2373,23 +2380,21 @@ msgid "Global scope constants and variables."
 msgstr "Константы и переменные глобальной области видимости."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid ""
 "Global scope constants and variables. This is all that resides in the "
 "globals, constants regarding error codes, scancodes, property hints, etc.\n"
 "Singletons are also documented here, since they can be accessed from "
 "anywhere."
 msgstr ""
-"Константы и переменные глобальной области видимости. Всё, что находится в "
-"глобальных переменных, константах, касающихся кодов ошибок, кодов клавиш, "
-"подсказок свойств и др.\n"
-"Здесь также задокументированы синглтоны, поскольку доступ к ним можно "
-"получить из любого места."
+"Константы и переменные глобальной области видимости. Это все, что находится "
+"в глобальной области видимости, константы, касающиеся кодов ошибок, "
+"сканкодов, подсказок свойств и т.д.\n"
+"Синглтоны также документируются здесь, поскольку к ним можно получить доступ "
+"из любой точки."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [ARVRServer] singleton."
-msgstr "Синглтон [XRServer]."
+msgstr "Синглтон [ARVRServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [AudioServer] singleton."
@@ -2408,9 +2413,8 @@ msgid "The [Engine] singleton."
 msgstr "Синглтон [Engine]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [Geometry] singleton."
-msgstr "Синглтон [Geometry2D]."
+msgstr "Синглтон [Geometry]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [IP] singleton."
@@ -2449,19 +2453,16 @@ msgid "The [Marshalls] singleton."
 msgstr "Синглтон [Marshalls]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [Navigation2DServer] singleton."
-msgstr "Синглтон [TranslationServer]."
+msgstr "Синглтон [Navigation2DServer]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [NavigationMeshGenerator] singleton."
 msgstr "Синглтон [NavigationMeshGenerator]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [NavigationServer] singleton."
-msgstr "Синглтон [TranslationServer]."
+msgstr "Синглтон [NavigationServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [OS] singleton."
@@ -2472,14 +2473,12 @@ msgid "The [Performance] singleton."
 msgstr "Синглтон [Performance]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [Physics2DServer] singleton."
-msgstr "Синглтон [PhysicsServer2D]."
+msgstr "Синглтон [Physics2DServer]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [PhysicsServer] singleton."
-msgstr "Синглтон [PhysicsServer2D]."
+msgstr "Синглтон [PhysicsServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [ProjectSettings] singleton."
@@ -2494,9 +2493,8 @@ msgid "The [ResourceSaver] singleton."
 msgstr "Синглтон [ResourceSaver]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [Time] singleton."
-msgstr "Синглтон [Engine]."
+msgstr "Синглтон [Time]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "The [TranslationServer] singleton."
@@ -2507,9 +2505,8 @@ msgid "The [VisualScriptEditor] singleton."
 msgstr "Синглтон [VisualScriptEditor]."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "The [VisualServer] singleton."
-msgstr "Синглтон [DisplayServer]."
+msgstr "Синглтон [VisualServer]."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Left margin, usually used for [Control] or [StyleBox]-derived classes."
@@ -2553,57 +2550,55 @@ msgid "Bottom-left corner."
 msgstr "Нижний левый угол."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid ""
 "General vertical alignment, usually used for [Separator], [ScrollBar], "
 "[Slider], etc."
 msgstr ""
-"Общее выравнивание по вертикали, обычно используемое для [Separator], "
+"Общее вертикальное выравнивание, обычно используется для [Separator], "
 "[ScrollBar], [Slider] и т.д."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid ""
 "General horizontal alignment, usually used for [Separator], [ScrollBar], "
 "[Slider], etc."
 msgstr ""
-"Общее выравнивание по горизонтали, обычно используемое для [Separator], "
-"[ScrollBar], [Slider] и др."
+"Общее горизонтальное выравнивание, обычно используется для [Separator], "
+"[ScrollBar], [Slider] и т.д."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "Horizontal left alignment, usually for text-derived classes."
-msgstr "Выравнивание по горизонтали слева, обычно для текстовых классов."
+msgstr ""
+"Горизонтальное выравнивание по левому краю, обычно для классов, содержащих "
+"текст."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "Horizontal center alignment, usually for text-derived classes."
-msgstr "Выравнивание по центру по горизонтали, обычно для текстовых классов."
+msgstr ""
+"Горизонтальное выравнивание по центру, обычно для классов, содержащих текст."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "Horizontal right alignment, usually for text-derived classes."
-msgstr "Выравнивание по горизонтали справа, обычно для текстовых классов."
+msgstr ""
+"Горизонтальное выравнивание по правому краю, обычно для классов, содержащих "
+"текст."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "Vertical top alignment, usually for text-derived classes."
-msgstr "Выравнивание по вертикали сверху, обычно для текстовых классов."
+msgstr ""
+"Вертикальное выравнивание сверху, обычно для классов, содержащих текст."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "Vertical center alignment, usually for text-derived classes."
-msgstr "Выравнивание по центру по вертикали, обычно для текстовых классов."
+msgstr ""
+"Вертикальное выравнивание по центру, обычно для классов, содержащих текст."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "Vertical bottom alignment, usually for text-derived classes."
-msgstr "Выравнивание по вертикали внизу, обычно для текстовых классов."
+msgstr "Вертикальное выравнивание снизу, обычно для классов, содержащих текст."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "Scancodes with this bit applied are non-printable."
-msgstr "Коды клавиш с этим битом — не печатаемые."
+msgstr "Сканкоды с таким битом непечатаемые."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Escape key."
@@ -2614,9 +2609,8 @@ msgid "Tab key."
 msgstr "Клавиша Tab."
 
 #: doc/classes/@GlobalScope.xml
-#, fuzzy
 msgid "Shift+Tab key."
-msgstr "Клавиша Shift + Tab."
+msgstr "Клавиша Shift+Tab."
 
 #: doc/classes/@GlobalScope.xml
 msgid "Backspace key."
@@ -6330,19 +6324,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -6363,21 +6359,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -6387,9 +6387,10 @@ msgstr "Возвращает [Texture2D] заданного кадра."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -7041,9 +7042,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -7226,10 +7227,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
+#, fuzzy
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
+"Воспроизводит анимацию с именем [code]anim[/code]. Если [code]anim[/code] не "
+"указан, воспроизводится текущая анимация."
 
 #: doc/classes/AnimationPlayer.xml
 msgid "Returns the list of stored animation names."
@@ -10422,8 +10426,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -10474,10 +10479,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -10725,12 +10740,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr "Сила искажения. Значение может варьироваться от 0 до 1."
@@ -11278,7 +11287,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -11439,12 +11453,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -11595,6 +11613,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -11735,7 +11768,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -13428,7 +13464,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -13521,7 +13557,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -13549,9 +13587,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -14058,13 +14096,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -14090,8 +14129,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14407,12 +14448,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14457,8 +14498,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14506,8 +14549,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14569,7 +14615,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -14700,7 +14746,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -17783,7 +17832,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19793,7 +19844,7 @@ msgstr ""
 #: modules/csg/doc_classes/CSGShape.xml modules/csg/doc_classes/CSGSphere.xml
 #: modules/csg/doc_classes/CSGTorus.xml
 msgid "Prototyping levels with CSG"
-msgstr ""
+msgstr "Прототипирование уровней с помощью CSG"
 
 #: modules/csg/doc_classes/CSGBox.xml
 msgid "Depth of the box measured from the center of the box."
@@ -20542,7 +20593,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -20691,16 +20744,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -20846,18 +20900,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Возвращает арксинус параметра."
@@ -25796,8 +25838,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -26419,7 +26465,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -28012,10 +28060,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -29439,8 +29490,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -31744,11 +31795,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -32597,7 +32651,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -32609,6 +32667,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -35006,14 +35074,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -35021,22 +35089,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Возвращает количество дорожек в анимации."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Возвращает скалярное произведение с вектором [code]b[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Возвращает скалярное произведение с вектором [code]b[/code]."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Возвращает скалярное произведение с вектором [code]b[/code]."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -36617,9 +36689,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -37080,7 +37152,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -38230,7 +38304,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -39078,13 +39152,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -42839,7 +42925,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -48273,7 +48361,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Возвращает скалярное произведение с вектором [code]b[/code]."
 
 #: doc/classes/PopupMenu.xml
@@ -48515,7 +48605,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -49251,7 +49343,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -51939,8 +52035,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -56016,7 +56123,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -56161,13 +56270,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -57357,7 +57472,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -57983,6 +58101,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -58317,7 +58443,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -59755,7 +59883,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -61050,6 +61178,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -61111,6 +61242,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -61133,7 +61267,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -62274,6 +62411,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Возвращает скалярное произведение с вектором [code]b[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -62304,6 +62446,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Возвращает скалярное произведение с вектором [code]b[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -62345,8 +62492,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+#, fuzzy
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
+"Излучается при нажатии пользовательской кнопки. Смотрите [method add_button]."
 
 #: doc/classes/Tabs.xml
 msgid "Emitted when a tab is clicked, even if it is the current tab."
@@ -67285,21 +67436,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -67312,7 +67467,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -67341,7 +67496,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -67351,22 +67538,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -67379,8 +67579,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -67578,16 +67780,16 @@ msgid "Unknown error."
 msgstr "Неизвестная ошибка."
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -76410,7 +76612,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
@@ -77856,6 +78060,14 @@ msgid ""
 "the same space as the parent YSort, allowing to better organize a scene or "
 "divide it in multiple ones, yet keep the unique sorting."
 msgstr ""
+"Сортировка всех дочерних узлов на основе их положения по оси Y. Для "
+"сортировки дочерний узел должен наследоваться от [CanvasItem]. Узлы, имеющие "
+"более высокую позицию по Y, будут отрисованы позже, поэтому они появятся "
+"поверх узлов, имеющих более низкую позицию по Y.\n"
+"Вложенность узлов YSort возможна. Дочерние узлы YSort будут отсортированы в "
+"том же пространстве, что и родительский YSort, что позволяет лучше "
+"организовать сцену или разделить ее на несколько, сохраняя при этом "
+"уникальную сортировку."
 
 #: doc/classes/YSort.xml
 msgid ""
diff --git a/doc/translations/sk.po b/doc/translations/sk.po
index ddcdeb10f1..35664c2df0 100644
--- a/doc/translations/sk.po
+++ b/doc/translations/sk.po
@@ -541,8 +541,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -552,7 +553,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -606,7 +608,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -618,7 +621,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1033,10 +1037,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4847,19 +4856,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4880,21 +4891,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4903,9 +4918,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5557,9 +5573,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5733,8 +5749,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8736,8 +8752,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8788,10 +8805,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9033,12 +9060,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9584,7 +9605,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9745,12 +9771,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9898,6 +9928,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10038,7 +10083,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11716,7 +11764,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11809,7 +11857,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11837,9 +11887,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12336,13 +12386,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12368,8 +12419,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12682,12 +12735,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12732,8 +12785,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12781,8 +12836,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12844,7 +12902,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12969,7 +13027,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15965,7 +16026,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18690,7 +18753,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18839,16 +18904,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -18993,18 +19059,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23911,8 +23965,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24532,7 +24590,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26116,10 +26176,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27526,8 +27589,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29827,11 +29890,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30676,7 +30742,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30688,6 +30758,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33045,14 +33125,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33060,21 +33140,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34651,9 +34731,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35112,7 +35192,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36224,7 +36306,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37039,13 +37121,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40709,7 +40803,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46073,7 +46169,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46312,7 +46410,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47041,7 +47141,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49722,8 +49826,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53740,7 +53855,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53884,13 +54001,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55080,7 +55203,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55699,6 +55825,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56033,7 +56167,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57466,7 +57602,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58731,6 +58867,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58792,6 +58931,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58814,7 +58956,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59951,6 +60096,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59980,6 +60129,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60021,7 +60174,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64886,21 +65041,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64913,7 +65072,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64942,7 +65101,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64952,22 +65143,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64980,8 +65184,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65179,16 +65385,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73818,7 +74024,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/sr_Cyrl.po b/doc/translations/sr_Cyrl.po
index 6a336f195b..7c73175270 100644
--- a/doc/translations/sr_Cyrl.po
+++ b/doc/translations/sr_Cyrl.po
@@ -552,8 +552,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -563,7 +564,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -617,7 +619,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -629,7 +632,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1044,10 +1048,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4858,19 +4867,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4891,21 +4902,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4914,9 +4929,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5568,9 +5584,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5744,8 +5760,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8747,8 +8763,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8799,10 +8816,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9044,12 +9071,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9595,7 +9616,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9756,12 +9782,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9909,6 +9939,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10049,7 +10094,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11727,7 +11775,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11820,7 +11868,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11848,9 +11898,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12347,13 +12397,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12379,8 +12430,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12693,12 +12746,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12743,8 +12796,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12792,8 +12847,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12855,7 +12913,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12980,7 +13038,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15976,7 +16037,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18701,7 +18764,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18850,16 +18915,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19004,18 +19070,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23922,8 +23976,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24543,7 +24601,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26127,10 +26187,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27537,8 +27600,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29838,11 +29901,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30687,7 +30753,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30699,6 +30769,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33056,14 +33136,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33071,21 +33151,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34662,9 +34742,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35123,7 +35203,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36235,7 +36317,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37050,13 +37132,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40720,7 +40814,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46084,7 +46180,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46323,7 +46421,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47052,7 +47152,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49733,8 +49837,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53751,7 +53866,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53895,13 +54012,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55091,7 +55214,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55710,6 +55836,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56044,7 +56178,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57477,7 +57613,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58742,6 +58878,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58803,6 +58942,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58825,7 +58967,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59962,6 +60107,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59991,6 +60140,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60032,7 +60185,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64897,21 +65052,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64924,7 +65083,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64953,7 +65112,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64963,22 +65154,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64991,8 +65195,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65190,16 +65396,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73829,7 +74035,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/sv.po b/doc/translations/sv.po
index b582952401..0d3aa2aa94 100644
--- a/doc/translations/sv.po
+++ b/doc/translations/sv.po
@@ -542,8 +542,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -553,7 +554,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -607,7 +609,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -619,7 +622,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1034,10 +1038,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4848,19 +4857,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4881,21 +4892,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4904,9 +4919,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5558,9 +5574,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5734,8 +5750,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8737,8 +8753,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8789,10 +8806,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9034,12 +9061,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9585,7 +9606,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9746,12 +9772,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9899,6 +9929,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10039,7 +10084,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11717,7 +11765,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11810,7 +11858,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11838,9 +11888,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12337,13 +12387,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12369,8 +12420,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12683,12 +12736,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12733,8 +12786,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12782,8 +12837,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12845,7 +12903,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12970,7 +13028,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -15966,7 +16027,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18691,7 +18754,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18840,16 +18905,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -18994,18 +19060,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23909,8 +23963,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24530,7 +24588,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26114,10 +26174,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27524,8 +27587,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29825,11 +29888,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30674,7 +30740,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30686,6 +30756,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33043,14 +33123,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33058,21 +33138,21 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34649,9 +34729,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35110,7 +35190,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36222,7 +36304,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37037,13 +37119,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40707,7 +40801,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46071,7 +46167,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46310,7 +46408,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47039,7 +47139,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49720,8 +49824,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53738,7 +53853,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53882,13 +53999,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55078,7 +55201,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55697,6 +55823,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56031,7 +56165,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57464,7 +57600,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58729,6 +58865,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58790,6 +58929,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58812,7 +58954,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -59949,6 +60094,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -59978,6 +60127,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60019,7 +60172,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -64884,21 +65039,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -64911,7 +65070,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -64940,7 +65099,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -64950,22 +65141,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -64978,8 +65182,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65177,16 +65383,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73816,7 +74022,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/th.po b/doc/translations/th.po
index 3b8c2afd36..f8e2b189b2 100644
--- a/doc/translations/th.po
+++ b/doc/translations/th.po
@@ -619,8 +619,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -630,7 +631,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -684,7 +686,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -696,7 +699,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1118,10 +1122,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4948,19 +4957,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4981,21 +4992,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5005,9 +5020,10 @@ msgstr "คืนค่าชื่อของอุปกรณ์เสีย
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5660,9 +5676,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5837,8 +5853,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8841,8 +8857,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8893,10 +8910,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9139,12 +9166,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9690,7 +9711,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9851,12 +9877,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10004,6 +10034,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10144,7 +10189,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11822,7 +11870,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11915,7 +11963,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11943,9 +11993,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12444,13 +12494,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12476,8 +12527,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12790,12 +12843,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12840,8 +12893,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12889,8 +12944,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12952,7 +13010,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13077,7 +13135,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16074,7 +16135,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18799,7 +18862,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18948,16 +19013,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19102,18 +19168,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -24022,8 +24076,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24644,7 +24702,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26231,10 +26291,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27642,8 +27705,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29965,11 +30028,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30834,7 +30900,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30846,6 +30916,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33215,14 +33295,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33230,22 +33310,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "คืนค่าการกำหนดค่าของลำโพง"
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "คืนค่าการกำหนดค่าของลำโพง"
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "คืนค่าการกำหนดค่าของลำโพง"
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "คืนค่าการกำหนดค่าของลำโพง"
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -34821,9 +34905,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35283,7 +35367,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36409,7 +36495,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37228,13 +37314,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40951,7 +41049,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46323,7 +46423,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "คืนค่าการกำหนดค่าของลำโพง"
 
 #: doc/classes/PopupMenu.xml
@@ -46562,7 +46664,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47291,7 +47395,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49977,8 +50085,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53998,7 +54117,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54142,13 +54263,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55338,7 +55465,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55957,6 +56087,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56291,7 +56429,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57725,7 +57865,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58992,6 +59132,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59053,6 +59196,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59075,7 +59221,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60212,6 +60361,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "คืนค่าการกำหนดค่าของลำโพง"
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60241,6 +60395,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "คืนค่าการกำหนดค่าของลำโพง"
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60282,7 +60441,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65152,21 +65313,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65179,7 +65344,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65208,7 +65373,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65218,22 +65415,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65246,8 +65456,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65445,16 +65657,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74103,7 +74315,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/tl.po b/doc/translations/tl.po
index 6fe51a2de6..481c9d5527 100644
--- a/doc/translations/tl.po
+++ b/doc/translations/tl.po
@@ -617,8 +617,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -628,7 +629,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -682,7 +684,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -694,7 +697,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1109,10 +1113,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4923,19 +4932,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4956,21 +4967,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4979,9 +4994,10 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5633,9 +5649,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5809,8 +5825,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8812,8 +8828,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8864,10 +8881,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9109,12 +9136,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9664,7 +9685,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9825,12 +9851,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9978,6 +10008,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10118,7 +10163,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11796,7 +11844,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11889,7 +11937,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11917,9 +11967,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12419,13 +12469,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12451,8 +12502,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12765,12 +12818,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12815,8 +12868,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12864,8 +12919,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12927,7 +12985,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13052,7 +13110,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16048,7 +16109,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18773,7 +18836,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18922,16 +18987,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19076,18 +19142,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr ""
 
@@ -23997,8 +24051,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24618,7 +24676,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26202,10 +26262,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27612,8 +27675,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29913,11 +29976,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30762,7 +30828,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30774,6 +30844,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33140,14 +33220,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33155,21 +33235,24 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
+msgid "Returns the amount of points in the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
 msgstr ""
+"Kung [code]true[/code], ang mga child nodes ay inaayos, kung hindi ang pag-"
+"so-sort ay hindi pinapagana."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -34749,9 +34832,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35210,7 +35293,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36334,7 +36419,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37149,13 +37234,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40819,7 +40916,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46186,7 +46285,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -46425,7 +46526,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47154,7 +47257,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49835,8 +49942,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53853,7 +53971,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -53997,13 +54117,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55193,7 +55319,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55812,6 +55941,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56146,7 +56283,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57579,7 +57718,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58844,6 +58983,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -58905,6 +59047,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -58927,7 +59072,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60064,6 +60212,10 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60093,6 +60245,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr ""
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60134,7 +60290,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65008,21 +65166,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65035,7 +65197,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65064,7 +65226,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65074,22 +65268,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65102,8 +65309,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65301,16 +65510,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -73943,7 +74152,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/tr.po b/doc/translations/tr.po
index ffa15621df..0c74573082 100644
--- a/doc/translations/tr.po
+++ b/doc/translations/tr.po
@@ -21,12 +21,13 @@
 # paledega <paledega@yandex.ru>, 2022.
 # Yekez <yasintonge@gmail.com>, 2022.
 # Deleted User <noreply+46858@weblate.org>, 2022.
+# Mustafa Said Ağca <m.said.agca@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-07-23 03:56+0000\n"
-"Last-Translator: Deleted User <noreply+46858@weblate.org>\n"
+"PO-Revision-Date: 2022-08-08 15:59+0000\n"
+"Last-Translator: Mustafa Said Ağca <m.said.agca@gmail.com>\n"
 "Language-Team: Turkish <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/tr/>\n"
 "Language: tr\n"
@@ -90,7 +91,7 @@ msgstr "Kalıtılan:"
 
 #: doc/tools/make_rst.py
 msgid "(overrides %s)"
-msgstr ""
+msgstr "(%s'yi geçersiz kılar)"
 
 #: doc/tools/make_rst.py
 msgid "Default"
@@ -808,8 +809,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -819,7 +821,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -899,7 +902,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -911,7 +915,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "Doğrusal olarak iki sayı arasında, sınırlandırma öğesine (0 ila 1 arasında) "
 "göre ara değer hesaplar (interpolate). [method inverse_lerp] yönteminin "
@@ -1590,18 +1595,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"[code]value[/code] değerini [code][istart, istop][/code] aralığından yola "
-"çıkarak [code][ostart, ostop][/code] aralığındaki karşılığına ölçekledirerek "
-"yerleştirir (haritalandırır).\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # 0.5 sonucunu döndürür. value=75, ilk aralık "
-"0 ila100, ikinci aralık -1 ila 1.\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 #, fuzzy
@@ -5636,19 +5639,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5669,21 +5674,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5693,9 +5702,10 @@ msgstr "Verilen değerin tanjantını döndürür."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6347,9 +6357,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6523,8 +6533,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -9526,8 +9536,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9578,10 +9589,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9824,12 +9845,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -10375,7 +10390,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10536,12 +10556,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10689,6 +10713,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10829,7 +10868,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12509,7 +12551,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12602,7 +12644,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12630,9 +12674,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -13140,13 +13184,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -13172,8 +13217,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13486,12 +13533,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13536,8 +13583,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13585,8 +13634,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13648,7 +13700,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13773,7 +13825,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16771,7 +16826,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19502,7 +19559,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19651,16 +19710,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19806,18 +19866,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Verilen bir değerin ark-sinüsünü döndürür."
@@ -24736,8 +24784,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -25362,7 +25414,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26952,10 +27006,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -28368,8 +28425,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30671,11 +30728,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31521,7 +31581,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31533,6 +31597,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33901,14 +33975,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33916,22 +33990,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Verilen değerin sinüsünü döndürür."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Verilen değerin sinüsünü döndürür."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Verilen değerin sinüsünü döndürür."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Verilen değerin sinüsünü döndürür."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -35511,9 +35589,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35974,7 +36052,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -37114,7 +37194,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37944,13 +38024,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41620,7 +41712,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -47017,7 +47111,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Verilen değerin sinüsünü döndürür."
 
 #: doc/classes/PopupMenu.xml
@@ -47256,7 +47352,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47986,7 +48084,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -50667,8 +50769,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54694,7 +54807,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54838,13 +54953,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -56034,7 +56155,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -56653,6 +56777,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56987,7 +57119,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -58422,7 +58556,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59689,6 +59823,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59750,6 +59887,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59772,7 +59912,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60909,6 +61052,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Verilen değerin sinüsünü döndürür."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60939,6 +61087,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Verilen değerin sinüsünü döndürür."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60980,7 +61133,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65865,21 +66020,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65892,7 +66051,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65921,7 +66080,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65931,22 +66122,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65959,8 +66163,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -66158,16 +66364,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74832,7 +75038,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/uk.po b/doc/translations/uk.po
index b1272c6b3e..2ebf849588 100644
--- a/doc/translations/uk.po
+++ b/doc/translations/uk.po
@@ -13,12 +13,14 @@
 # Vladyslav Anisimov <uniss@ua.fm>, 2022.
 # Мирослав <hlopukmyroslav@gmail.com>, 2022.
 # Гліб Соколов <ramithes@i.ua>, 2022.
+# Yan Chen <cyan97087@gmail.com>, 2022.
+# Богдан Матвіїв <bomtvv@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-06-14 15:48+0000\n"
-"Last-Translator: Мирослав <hlopukmyroslav@gmail.com>\n"
+"PO-Revision-Date: 2022-08-23 03:39+0000\n"
+"Last-Translator: Богдан Матвіїв <bomtvv@gmail.com>\n"
 "Language-Team: Ukrainian <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/uk/>\n"
 "Language: uk\n"
@@ -27,7 +29,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
 "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -70,9 +72,8 @@ msgid "Method Descriptions"
 msgstr "Описи методів"
 
 #: doc/tools/make_rst.py
-#, fuzzy
 msgid "Theme Property Descriptions"
-msgstr "Описи Властивостей Теми"
+msgstr "Описи тематичної нерухомості"
 
 #: doc/tools/make_rst.py
 msgid "Inherits:"
@@ -441,18 +442,15 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Returns the hyperbolic cosine of [code]s[/code] in radians.\n"
 "[codeblock]\n"
 "print(cosh(1)) # Prints 1.543081\n"
 "[/codeblock]"
 msgstr ""
-"Повертає абсолютне значення параметру [code]s[/code] (тобто значення без "
-"знака, працює для цілих чисел і чисел із рухомою крапкою).\n"
+"Повертає гіперболічний косинус [code]s[/code] у радіанах.\n"
 "[codeblock]\n"
-"# a дорівнює 1\n"
-"a = abs(-1)\n"
+"print(cosh(1)) # Виведе 1.543081\n"
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -676,8 +674,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -687,7 +686,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -741,7 +741,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -753,7 +754,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -944,7 +946,6 @@ msgid ""
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Returns the result of [code]base[/code] raised to the power of [code]exp[/"
 "code].\n"
@@ -952,12 +953,9 @@ msgid ""
 "pow(2, 5) # Returns 32.0\n"
 "[/codeblock]"
 msgstr ""
-"Повертає арксинус [code]s[/code] у радіанах. Використовується для отримання "
-"кута синуса [code]s[/code].\n"
+"Повертає результат [code]base[/code], піднятий до степеню [code]exp[/code].\n"
 "[codeblock]\n"
-"# s дорівнює 0.523599 або 30 градусів, якщо конвертувати за допомогою "
-"rad2deg(s)\n"
-"s = asin(0.5)\n"
+"pow(2, 5) # Повертає 32.0\n"
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1176,10 +1174,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4998,19 +5001,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5031,21 +5036,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5055,9 +5064,10 @@ msgstr "Повертає тангенс параметра."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5709,9 +5719,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5885,8 +5895,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8894,8 +8904,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8946,12 +8957,22 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
+msgstr "Звукові шини"
+
 #: doc/classes/AudioEffectCapture.xml
 msgid ""
 "Returns [code]true[/code] if at least [code]frames[/code] audio frames are "
@@ -9192,12 +9213,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr "Звукові шини"
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9743,7 +9758,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9904,12 +9924,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10057,6 +10081,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10197,7 +10236,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11878,7 +11920,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11971,7 +12013,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11999,9 +12043,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12503,13 +12547,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12535,8 +12580,10 @@ msgstr "Власне малювання в 2D"
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12849,12 +12896,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12899,8 +12946,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12948,8 +12997,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13011,7 +13063,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13136,7 +13188,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16133,7 +16188,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18864,7 +18921,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19013,16 +19072,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19168,18 +19228,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Повертає арксинус параметра."
@@ -24091,8 +24139,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24713,7 +24765,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26301,10 +26355,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27720,8 +27777,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30023,11 +30080,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30873,7 +30933,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30885,6 +30949,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33246,14 +33320,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33261,22 +33335,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Повертає мінімальний кут до заданого вектора у радіанах."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Обчислює векторний добуток цього вектора і [code]b[/code]."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Обчислює векторний добуток двох векторів та [code]with[/code]."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Обчислює векторний добуток цього вектора і [code]b[/code]."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -34853,9 +34931,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35316,7 +35394,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36455,7 +36535,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37281,13 +37361,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40957,7 +41049,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -41918,7 +42012,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PacketPeer.xml
-#, fuzzy
 msgid ""
 "[i]Deprecated.[/i] Use [code]get_var[/code] and [code]put_var[/code] "
 "parameters instead.\n"
@@ -41928,12 +42021,14 @@ msgid ""
 "Do not use this option if the serialized object comes from untrusted sources "
 "to avoid potential security threats such as remote code execution."
 msgstr ""
-"Декодує масив байтів назад у значення. Якщо [code]allow_objects[/code] "
-"дорівнює [code]true[/code], декодування об'єктів дозволено.\n"
-"[b]ПОПЕРЕДЖЕННЯ:[/b] десеріалізований об'єкт може містити виконуваний код. "
-"Не використовуйте цю опцію, якщо серіалізований об'єкт отримано із "
-"неперевірених джерел задля уникнення потенційних порушень безпеки "
-"(віддаленого виконування коду)."
+"[i]Застаріло.[/i] Натомість використовуйте параметри [code]get_var[/code] і "
+"[code]put_var[/code].\n"
+"Якщо [code]true[/code], PacketPeer дозволить кодувати та декодувати об’єкт "
+"за допомогою [method get_var] і [method put_var].\n"
+"[b]Попередження: [/b] Десеріалізовані об’єкти можуть містити код, який "
+"виконується. Не використовуйте цей параметр, якщо серіалізований об’єкт "
+"походить із ненадійних джерел, щоб уникнути потенційних загроз безпеці, "
+"наприклад віддаленого виконання коду."
 
 #: doc/classes/PacketPeer.xml
 msgid ""
@@ -46345,7 +46440,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Обчислює векторний добуток двох векторів та [code]with[/code]."
 
 #: doc/classes/PopupMenu.xml
@@ -46584,7 +46681,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47314,7 +47413,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49995,8 +50098,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54015,7 +54129,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54159,13 +54275,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55355,7 +55477,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55975,6 +56100,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56309,7 +56442,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57743,7 +57878,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59010,6 +59145,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59071,6 +59209,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59093,7 +59234,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60230,6 +60374,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Обчислює векторний добуток цього вектора і [code]b[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60260,6 +60409,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Обчислює векторний добуток цього вектора і [code]b[/code]."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60301,7 +60455,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65185,21 +65341,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65212,7 +65372,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65241,7 +65401,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65251,22 +65443,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65279,8 +65484,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65478,16 +65685,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74150,7 +74357,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/doc/translations/vi.po b/doc/translations/vi.po
index 60ab8769ab..bc880f2cf4 100644
--- a/doc/translations/vi.po
+++ b/doc/translations/vi.po
@@ -8,12 +8,13 @@
 # Hung <hungthitkhia@gmail.com>, 2021.
 # Giacat Buile <hatconan20024@gmail.com>, 2021.
 # Quinn Le <quinnsgn@gmail.com>, 2021.
+# TrieuPhong <trieuphong965@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-04-25 15:12+0000\n"
-"Last-Translator: IoeCmcomc <hopdaigia2004@gmail.com>\n"
+"PO-Revision-Date: 2022-09-09 12:42+0000\n"
+"Last-Translator: TrieuPhong <trieuphong965@gmail.com>\n"
 "Language-Team: Vietnamese <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/vi/>\n"
 "Language: vi\n"
@@ -21,7 +22,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.12.1-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -796,8 +797,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -807,7 +809,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -879,7 +882,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -891,7 +895,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1393,10 +1398,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -5298,19 +5308,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5331,21 +5343,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5355,9 +5371,10 @@ msgstr "Trả về [Texture2D] của khung hình được cho."
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6009,9 +6026,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -6184,10 +6201,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
+#, fuzzy
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
+"Chạy hoạt ảnh tên là [code]anim[/code]. Nếu không cung cấp [code]anim[/code] "
+"nào, thì chạy hoạt ảnh hiện tại."
 
 #: doc/classes/AnimationPlayer.xml
 msgid "Returns the list of stored animation names."
@@ -9189,8 +9209,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -9241,10 +9262,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9487,12 +9518,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -10038,7 +10063,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10199,12 +10229,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10352,6 +10386,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10492,7 +10541,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12173,7 +12225,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12266,7 +12318,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12294,9 +12348,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12799,13 +12853,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12831,8 +12886,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13145,12 +13202,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13195,8 +13252,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13244,8 +13303,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13307,7 +13369,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13432,7 +13494,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16431,7 +16496,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -19163,7 +19230,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -19312,16 +19381,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19467,18 +19537,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "Trả về sin nghịch đảo của tham số."
@@ -24393,8 +24451,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -25015,7 +25077,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26603,10 +26667,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -28017,8 +28084,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -30321,11 +30388,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31171,7 +31241,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -31183,6 +31257,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33546,14 +33630,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33561,22 +33645,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "Trả về sin của tham số."
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "Trả về sin của tham số."
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "Trả về sin của tham số."
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "Trả về sin của tham số."
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -35154,9 +35242,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35617,7 +35705,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36756,7 +36846,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37585,13 +37675,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -41261,7 +41363,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46657,7 +46761,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "Trả về sin của tham số."
 
 #: doc/classes/PopupMenu.xml
@@ -46897,7 +47003,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47627,7 +47735,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -50311,8 +50423,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -54336,7 +54459,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54480,13 +54605,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55676,7 +55807,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -56297,6 +56431,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56631,7 +56773,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -58066,7 +58210,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -59333,6 +59477,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59394,6 +59541,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59416,7 +59566,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60553,6 +60706,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Trả về sin của tham số."
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60583,6 +60741,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "Trả về sin của tham số."
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60624,7 +60787,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65511,21 +65676,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65538,7 +65707,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65567,7 +65736,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65577,22 +65778,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65605,8 +65819,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65804,16 +66020,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74489,7 +74705,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
@@ -75915,3 +76133,5 @@ msgstr ""
 msgid ""
 "If [code]true[/code], child nodes are sorted, otherwise sorting is disabled."
 msgstr ""
+"Nếu [code] true [/code], các nút con sẽ được sắp xếp, nếu không, tính năng "
+"sắp xếp sẽ bị vô hiệu hóa."
diff --git a/doc/translations/zh_CN.po b/doc/translations/zh_CN.po
index 7647bf0081..a69559f289 100644
--- a/doc/translations/zh_CN.po
+++ b/doc/translations/zh_CN.po
@@ -58,11 +58,12 @@
 # 苏轼 <youwanyuyu@gmail.com>, 2021.
 # ErrorDreemurr <diandaokui@qq.com>, 2021.
 # 烧风 <hk-shao@foxmail.com>, 2022.
+# Yan Chen <cyan97087@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-07-31 16:43+0000\n"
+"PO-Revision-Date: 2022-09-08 07:39+0000\n"
 "Last-Translator: Haoyu Qiu <timothyqiu32@gmail.com>\n"
 "Language-Team: Chinese (Simplified) <https://hosted.weblate.org/projects/"
 "godot-engine/godot-class-reference/zh_Hans/>\n"
@@ -71,7 +72,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -369,7 +370,7 @@ msgid ""
 "not use this option if the serialized object comes from untrusted sources to "
 "avoid potential security threats (remote code execution)."
 msgstr ""
-"将字节数组解码返回一个值。当 [code]allow_objects[/code] 为 [code]true[/code] "
+"将字节数组解码回一个值。当 [code]allow_objects[/code] 为 [code]true[/code] "
 "时，允许解码对象。\n"
 "[b]警告：[/b]反序列化得到的对象可能包含可执行的代码。如果序列化的对象的来源不"
 "可信，请不要激活此选项，以避免潜在的安全威胁（远程执行代码）。"
@@ -827,6 +828,7 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Returns an interpolation or extrapolation factor considering the range "
 "specified in [code]from[/code] and [code]to[/code], and the interpolated "
@@ -834,8 +836,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -845,7 +848,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 "返回插值或外推的因子。范围用 [code]from[/code] 和 [code]to[/code] 指定，插值"
 "后的值用 [code]weight[/code] 指定。如果 [code]weight[/code] 在 [code]from[/"
@@ -922,12 +926,14 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
+#, fuzzy
 msgid ""
 "Linearly interpolates between two values by the factor defined in "
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -939,7 +945,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr ""
 "在两个值之间按照 [code]weight[/code] 定义的因数进行线性插值。进行插值时，"
 "[code]weight[/code] 应该在 [code]0.0[/code] 和 [code]1.0[/code] 之间（包"
@@ -1612,16 +1619,16 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
-"将 [code]value[/code] 从范围 [code][istart, istop][/code] 映射到 [code]"
-"[ostart, ostop][/code]。\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # 返回 0.5\n"
-"[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
@@ -6002,22 +6009,22 @@ msgstr ""
 "[AnimationRootNode] 时才有用，否则编辑器将不会显示你的节点进行添加。"
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
-msgstr "获取此节点的文本标题（由某些编辑器使用）。"
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
+msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
-msgstr "按索引获取一个子节点（由继承 [AnimationRootNode] 的编辑器使用）。"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
+msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
-"按照 [code]name: node[/code] 字典的顺序获取所有子节点。仅在继承 "
-"[AnimationRootNode] 时有用。"
 
 #: doc/classes/AnimationNode.xml
 msgid ""
@@ -6038,16 +6045,21 @@ msgstr ""
 "中重复使用。"
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 "获取一个参数的默认值。参数是用于节点的自定义本地内存，给定资源可以在多个树中"
 "重用。"
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
@@ -6055,9 +6067,11 @@ msgstr ""
 "树中重复使用。格式类似于[method Object.get_property_list]。"
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr "返回 [code]true[/code]，是否希望混合树编辑器在此节点上显示过滤器编辑。"
 
 #: doc/classes/AnimationNode.xml
@@ -6065,10 +6079,12 @@ msgid "Returns whether the given path is filtered."
 msgstr "返回是否对给定的路径进行过滤。"
 
 #: doc/classes/AnimationNode.xml
+#, fuzzy
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -6806,23 +6822,24 @@ msgid ""
 msgstr "按照最短路径从当前状态过渡到另一个状态。"
 
 #: doc/classes/AnimationNodeStateMachineTransition.xml
+#, fuzzy
 msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
 "[/codeblock]"
 msgstr ""
-"设置此条件，开启自动前进。提供的名称将成为 [AnimationTree] 上的一个布尔参数，"
-"可以通过代码控制，请参阅 [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]。例如，如果 [member AnimationTree."
-"tree_root] 是一个 [AnimationNodeStateMachine]，[member advance_condition] 被"
-"设置为 [code]\"idle\"[/code]。\n"
+"这个条件为真时，将开启自动前进。提供的名称将成为 [AnimationTree] 上的布尔参"
+"数，可以通过代码控制，请参阅 [url=$DOCS_URL/tutorials/animation/"
+"animation_tree.html#controlling-from-code][/url]。例如，如果 [member "
+"AnimationTree.tree_root] 是一个 [AnimationNodeStateMachine]，[member "
+"advance_condition] 被设置为 [code]\"idle\"[/code]：\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -7030,9 +7047,10 @@ msgid ""
 msgstr "返回 [code]animation[/code] 的名称，如果没有找到，则返回一个空字符串。"
 
 #: doc/classes/AnimationPlayer.xml
+#, fuzzy
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 "返回键为 [code]name[/code] 的 [Animation] 动画，未找到时为 [code]null[/"
 "code]。"
@@ -7634,7 +7652,7 @@ msgstr "返回给定其名称的 OneShot 节点的淡出时间。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Returns whether a OneShot node will auto restart given its name."
-msgstr "返回OneShot节点是否会根据其名称自动重新启动。"
+msgstr "返回 OneShot 节点是否会根据其名称自动重新启动。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "Returns whether a OneShot node is active given its name."
@@ -7716,8 +7734,9 @@ msgid ""
 "If applied after a blend or mix, affects all input animations to that blend "
 "or mix."
 msgstr ""
-"设置名称为 [code]id[/code] 的TimeScale节点的时间缩放为[code]scale[/code]。\n"
-"时间缩放节点用来加快[Animation]的速度，如果缩放高于1，就会减慢它们。\n"
+"设置名称为 [code]id[/code] 的 TimeScale 节点的时间缩放为 [code]scale[/"
+"code]。\n"
+"时间缩放节点用来加快 [Animation] 的速度，如果缩放高于1，就会减慢它们。\n"
 "如果在混合后应用，会影响到该混合的所有输入动画。"
 
 #: doc/classes/AnimationTreePlayer.xml
@@ -7727,9 +7746,9 @@ msgid ""
 "This functions as a seek in the [Animation] or the blend or mix of "
 "[Animation]s input in it."
 msgstr ""
-"设置名称为 [code]id[/code] 的TimeSeek节点的时间查寻值为[code]seconds[/"
+"设置名称为 [code]id[/code] 的 TimeSeek 节点的时间查寻值为 [code]seconds[/"
 "code]。\n"
-"这在[Animation]或输入的[Animation]的混合中起到查寻的作用。"
+"这在 [Animation] 或输入的 [Animation] 的混合中起到查寻的作用。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -7763,8 +7782,8 @@ msgid ""
 "transition node with name [code]id[/code] is set to automatically advance to "
 "the next input upon completion."
 msgstr ""
-"如果过渡节点上名称为 [code]id[/code] 的[code]input_idx[/code]的输入被设置为在"
-"完成后自动前进到下一个输入，则返回 [code]true[/code]。"
+"如果过渡节点上名称为 [code]id[/code] 的 [code]input_idx[/code] 的输入被设置为"
+"在完成后自动前进到下一个输入，则返回 [code]true[/code]。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -7778,8 +7797,8 @@ msgid ""
 "The transition node with name [code]id[/code] advances to its next input "
 "automatically when the input at [code]input_idx[/code] completes."
 msgstr ""
-"当[code]input_idx[/code]处的输入完成后，名称为 [code]id[/code] 的过渡节点自动"
-"进行到下一个输入。"
+"当 [code]input_idx[/code] 处的输入完成后，名称为 [code]id[/code] 的过渡节点自"
+"动进行到下一个输入。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -7792,13 +7811,13 @@ msgid ""
 "The transition node with name [code]id[/code] sets its cross fade time to "
 "[code]time_sec[/code]."
 msgstr ""
-"名称为 [code]id[/code] 的过渡节点将其交叉淡化时间设置为[code]time_sec[/"
+"名称为 [code]id[/code] 的过渡节点将其交叉淡化时间设置为 [code]time_sec[/"
 "code]。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
 "If [code]true[/code], the [AnimationTreePlayer] is able to play animations."
-msgstr "如果为 [code]true[/code]，[AnimationTreePlayer]就能够播放动画。"
+msgstr "如果为 [code]true[/code]，[AnimationTreePlayer] 就能够播放动画。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -7807,7 +7826,7 @@ msgid ""
 "[AnimationPlayer] would point its Root Node at."
 msgstr ""
 "相对访问其他节点的节点。\n"
-"它访问骨骼，应该指向[AnimationPlayer]将指向其根节点的同一个节点。"
+"它访问骨骼，应该指向 [AnimationPlayer] 将指向其根节点的同一个节点。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -7817,7 +7836,7 @@ msgid ""
 msgstr ""
 "通过 [AnimationPlayer] 的路径，此 [AnimationTreePlayer] 将动画绑定到动画节"
 "点。\n"
-"设置后，[Animation]节点可以添加到[AnimationPlayer]。"
+"设置后，[Animation] 节点可以添加到 [AnimationPlayer]。"
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid "The thread in which to update animations."
@@ -7946,7 +7965,7 @@ msgid ""
 "details about damping."
 msgstr ""
 "物体在此区域停止旋转的速度。代表每秒损失的角速度.\n"
-"关于阻尼的更多细节，见[member ProjectSettings.physics/3d/"
+"关于阻尼的更多细节，见 [member ProjectSettings.physics/3d/"
 "default_angular_damp]。"
 
 #: doc/classes/Area.xml doc/classes/Area2D.xml
@@ -8051,7 +8070,7 @@ msgid ""
 "be set to [code]true[/code].\n"
 "[code]area[/code] the other Area."
 msgstr ""
-"当另一个 Area 进入这个 Area 时触发。需要将监控 [member monitoring] 设置为 "
+"当另一个 Area 进入这个 Area 时触发。需要 [member monitoring] 被设置为 "
 "[code]true[/code]。\n"
 "[code]area[/code] 参数是另外一个 Area。"
 
@@ -8061,9 +8080,9 @@ msgid ""
 "be set to [code]true[/code].\n"
 "[code]area[/code] the other Area."
 msgstr ""
-"当另一个区域退出这个区域时发出的。要求监控[member monitoring]被设置为 "
+"当另一个区域退出这个区域时发出的。要求 [member monitoring] 被设置为 "
 "[code]true[/code]。\n"
-"[code]area[/code]参数是另外一个Area。"
+"[code]area[/code] 参数是另外一个 Area。"
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8079,17 +8098,17 @@ msgid ""
 "the [PhysicsServer]. Get the [CollisionShape] node with [code]self."
 "shape_owner_get_owner(local_shape_index)[/code]."
 msgstr ""
-"当另一个区域的一个[Shape]进入这个区域的一个[Shape]时发出的。要求[member "
+"当另一个区域的一个 [Shape] 进入这个区域的一个 [Shape] 时发出的。要求 [member "
 "monitoring] 被设置为 [code]true[/code]。\n"
-"[code]area_rid[/code] [PhysicsServer]使用的其他区域的[CollisionObject]的"
+"[code]area_rid[/code] [PhysicsServer]使用的其他区域的 [CollisionObject] 的 "
 "[RID]。\n"
 "[code]area[/code] 其他区域。\n"
-"[code]area_shape_index[/code] [PhysicsServer]使用的其他区域的[Shape]的索引。"
-"用[code]area.shape_owner_get_owner(area_shape_index)[/code]获得"
-"[CollisionShape]节点。\n"
-"[code]local_shape_index[/code]是[PhysicsServer]使用的该区域的[Shape]的索引。"
-"用[code]self.shape_owner_get_owner(local_shape_index)[/code]获得"
-"[CollisionShape]节点。"
+"[code]area_shape_index[/code] [PhysicsServer] 使用的其他区域的 [Shape] 的索"
+"引。用 [code]area.shape_owner_get_owner(area_shape_index)[/code] 获得 "
+"[CollisionShape] 节点。\n"
+"[code]local_shape_index[/code] [PhysicsServer] 使用的该区域的 [Shape] 的索"
+"引。用 [code]self.shape_owner_get_owner(local_shape_index)[/code] 获得 "
+"[CollisionShape] 节点。"
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8143,7 +8162,7 @@ msgstr ""
 "[code]body[/code] [PhysicsBody] 或 [GridMap] 的 [Node]，如果它存在于树中的"
 "话。\n"
 "[code]body_shape_index[/code] [PhysicsServer] 使用的 [PhysicsBody] 或 "
-"[GridMap] 的 [Shape]的索引。用 [code]body."
+"[GridMap] 的 [Shape] 的索引。用 [code]body."
 "shape_owner_get_owner(body_shape_index)[/code] 获取 [CollisionShape] 节点。\n"
 "[code]local_shape_index[/code] 这个区域的 [Shape] 的索引，由 [PhysicsServer] "
 "使用。用 [code]self.shape_owner_get_owner(local_shape_index)[/code] 获得 "
@@ -8465,7 +8484,7 @@ msgstr ""
 "点。\n"
 "[code]local_shape_index[/code] 这个 Area2D 的 [Shape2D] 的索引，由 "
 "[Physics2DServer] 使用。用 [code]self."
-"shape_owner_get_owner(local_shape_index)[/code]获取[CollisionShape2D]节点。"
+"shape_owner_get_owner(local_shape_index)[/code]获取 [CollisionShape2D] 节点。"
 
 #: doc/classes/Array.xml
 msgid "A generic array datatype."
@@ -8991,8 +9010,8 @@ msgid ""
 "and upper index are inclusive, with the [code]step[/code] describing the "
 "change between indices while slicing."
 msgstr ""
-"复制函数中描述的子集并以数组形式返回，如果[code]deep[/code]为 [code]true[/"
-"code]，则深度复制数组。下索引和上索引是包含的，[code]step[/code]描述了分片时"
+"复制函数中描述的子集并以数组形式返回，如果 [code]deep[/code] 为 [code]true[/"
+"code]，则深度复制数组。下索引和上索引是包含的，[code]step[/code] 描述了分片时"
 "索引之间的变化。"
 
 #: doc/classes/Array.xml
@@ -9109,9 +9128,8 @@ msgstr ""
 "var m = MeshInstance.new()\n"
 "m.mesh = arr_mesh\n"
 "[/codeblock]\n"
-"这个 [MeshInstance] 已经准备就绪，以添加到要显示的 [SceneTree] 中。\n"
-"程序式几何体生成，请参阅 [ImmediateGeometry]、[MeshDataTool]、"
-"[SurfaceTool]。\n"
+"这个 [MeshInstance] 就可以添加到要显示的 [SceneTree] 中了。\n"
+"程序式几何体生成请参阅 [ImmediateGeometry]、[MeshDataTool]、[SurfaceTool]。\n"
 "[b]注意：[/b]Godot 对三角形图元模式的正面使用顺时针[url=https://learnopengl-"
 "cn.github.io/04%20Advanced%20OpenGL/04%20Face%20culling/]环绕顺序[/url]。"
 
@@ -9549,7 +9567,7 @@ msgid ""
 "If provided by the [ARVRInterface], this returns a mesh associated with the "
 "controller. This can be used to visualize the controller."
 msgstr ""
-"如果由 [ARVRInterface]提供，则返回与控制器相关的网格。这可用于可视化控制器。"
+"如果由 [ARVRInterface] 提供，则返回与控制器相关的网格。这可用于可视化控制器。"
 
 #: doc/classes/ARVRController.xml
 msgid ""
@@ -9588,8 +9606,8 @@ msgid ""
 "This is a useful property to animate if you want the controller to vibrate "
 "for a limited duration."
 msgstr ""
-"控制器振动的程度。范围从 [code]0.0[/code] 到 [code]1.0[/code]。如果更改，"
-"会相应地更新 [member ARVRPositionalTracker.rumble]。\n"
+"控制器振动的程度。范围从 [code]0.0[/code] 到 [code]1.0[/code]。如果更改，会相"
+"应地更新 [member ARVRPositionalTracker.rumble]。\n"
 "如果你想让控制器在限定时间内振动，这是一个有用的属性，可以将其动画化。"
 
 #: doc/classes/ARVRController.xml
@@ -9685,8 +9703,8 @@ msgid ""
 msgstr ""
 "调用这个来初始化这个接口。第一个被初始化的接口确定为主接口，用于渲染输出。\n"
 "在初始化了接口之后，需要启用视窗的 AR/VR 模式，将开始渲染。\n"
-"[b]注意：[/b]对于任何使用Godot主输出的设备，如移动VR，你必须在主视窗上启用 "
-"AR/VR 模式。\n"
+"[b]注意：[/b]对于任何使用 Godot 主输出的设备，如移动 VR，你必须在主视窗上启"
+"用 AR/VR 模式。\n"
 "如果你为一个处理自己输出的平台这样做（如 OpenVR），Godot 就会在屏幕上只显示一"
 "只眼睛而不失真。另外，你可以在场景中添加一个单独的视窗节点，在该视窗上启用 "
 "AR/VR。它将被用来输出到 HMD，让你在主窗口中做你喜欢的事情，比如用一个单独的相"
@@ -10527,7 +10545,7 @@ msgstr ""
 "var res = astar.get_id_path(1, 3) # 返回 [1, 2, 3]\n"
 "[/codeblock]\n"
 "如果你把第 2 点的权重改为 3，那么结果就会变成 [code][1, 4, 3][/code]，因为现"
-"在虽然距离长了，但通过第 4 点比通过第 2 点 “容易”。"
+"在虽然距离长了，但通过第 4 点比通过第 2 点“容易”。"
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
@@ -10841,10 +10859,10 @@ msgid ""
 "[b]Note:[/b] This method is not thread-safe. If called from a [Thread], it "
 "will return an empty [PoolVector2Array] and will print an error message."
 msgstr ""
-"返回一个数组，该数组包含了AStar2D在给定点之间找到的路径中的点。该数组从路径的"
-"起点到终点排序。\n"
-"[b]注意：[/b]这个方法不是线程安全的。如果从一个[Thread]线程中调用，它将返回一"
-"个空的[PoolVector2Array]，并打印一个错误信息。"
+"返回一个数组，该数组包含了 AStar2D 在给定点之间找到的路径中的点。该数组从路径"
+"的起点到终点排序。\n"
+"[b]注意：[/b]这个方法不是线程安全的。如果从 [Thread] 线程中调用，它将返回一个"
+"空的 [PoolVector2Array]，并打印一个错误信息。"
 
 #: doc/classes/AtlasTexture.xml
 msgid ""
@@ -10914,7 +10932,7 @@ msgid ""
 "the connections between buses. See [AudioServer] for usage."
 msgstr ""
 "存储位置、静音、独奏、旁通、效果、效果位置、音量以及总线之间的连接。使用方法"
-"参阅 [AudioServer] 。"
+"见 [AudioServer] 。"
 
 #: doc/classes/AudioEffect.xml
 msgid "Audio effect for audio."
@@ -10926,8 +10944,9 @@ msgid ""
 "resource is applied on."
 msgstr "音频总线的基础资源。在该资源所应用的总线上应用音频效果。"
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr "音频麦克风录音演示"
@@ -10981,15 +11000,20 @@ msgid "Captures audio from an audio bus in real-time."
 msgstr "从音频总线上实时捕捉音频。"
 
 #: doc/classes/AudioEffectCapture.xml
+#, fuzzy
 msgid ""
 "AudioEffectCapture is an AudioEffect which copies all audio frames from the "
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 "AudioEffectCapture 是一种 AudioEffect，可将所附音频效果总线的所有音频帧复制到"
 "其内部的环形缓冲器中。\n"
@@ -10997,17 +11021,23 @@ msgstr ""
 "需要进行处理，例如从麦克风捕获数据、实现应用程序定义的效果或通过网络传输音"
 "频。从麦克风捕获音频数据时，样本的格式为立体声 32 位浮点数 PCM。"
 
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
+msgstr "音频总线"
+
 #: doc/classes/AudioEffectCapture.xml
 msgid ""
 "Returns [code]true[/code] if at least [code]frames[/code] audio frames are "
 "available to read in the internal ring buffer."
 msgstr ""
-"如果内部环缓冲器中至少有[code]frames[/code]音频帧可供读取，则返回 "
+"如果内部环形缓冲区中至少有 [code]frames[/code] 个音频帧可供读取，则返回 "
 "[code]true[/code]。"
 
 #: doc/classes/AudioEffectCapture.xml
 msgid "Clears the internal ring buffer."
-msgstr "清除内部环缓冲区。"
+msgstr "清除内部环形缓冲区。"
 
 #: doc/classes/AudioEffectCapture.xml
 msgid ""
@@ -11017,13 +11047,13 @@ msgid ""
 "samples if available, or an empty [PoolVector2Array] if insufficient data "
 "was available."
 msgstr ""
-"从内部环缓冲区获取下一个[code]frames[/code]音频样本。\n"
-"如果有的话，返回一个正好包含[code]frames[/code]音频样本的[PoolVector2Array]，"
-"如果没有足够的数据，则返回一个空[PoolVector2Array]。"
+"从内部环形缓冲区获取后续 [code]frames[/code] 个音频样本。\n"
+"如果有的话，返回一个正好包含 [code]frames[/code] 个音频样本的 "
+"[PoolVector2Array]，如果没有足够的数据，则返回一个空 [PoolVector2Array]。"
 
 #: doc/classes/AudioEffectCapture.xml
 msgid "Returns the total size of the internal ring buffer in frames."
-msgstr "返回内部环缓冲区的总大小，以帧为单位。"
+msgstr "返回内部环形缓冲区的总大小，以帧为单位。"
 
 #: doc/classes/AudioEffectCapture.xml
 msgid ""
@@ -11045,7 +11075,7 @@ msgid ""
 "Length of the internal ring buffer, in seconds. Setting the buffer length "
 "will have no effect if already initialized."
 msgstr ""
-"内部环缓冲区的长度，单位是秒。如果已经初始化，设置缓冲区长度将没有效果。"
+"内部环形缓冲区的长度，单位为秒。如果已经初始化，设置缓冲区长度将没有效果。"
 
 #: doc/classes/AudioEffectChorus.xml
 msgid "Adds a chorus audio effect."
@@ -11270,12 +11300,6 @@ msgstr ""
 "通过扭曲波形，频率内容会发生变化，这通常会使声音“清脆”或“粗糙”。对于游戏，它"
 "可以非常有效地模拟来自一些饱和设备或扬声器的声音。"
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr "音频总线"
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr "失真度。值的范围可在 0 到 1 之间。"
@@ -11932,8 +11956,13 @@ msgstr ""
 "[AudioEffect] 效果。"
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
-msgstr "返回系统上检测到的所有音频输入设备的名称。"
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid "Generates an [AudioBusLayout] using the available buses and effects."
@@ -12092,7 +12121,7 @@ msgid ""
 "Sets the volume of the bus at index [code]bus_idx[/code] to [code]volume_db[/"
 "code]."
 msgstr ""
-"将索引 [code]bus_idx[/code] 处的总线容量设置为 [code]volume_db[/code]。"
+"将索引 [code]bus_idx[/code] 处的总线音量设置为 [code]volume_db[/code]。"
 
 #: doc/classes/AudioServer.xml
 msgid "Swaps the position of two effects in bus [code]bus_idx[/code]."
@@ -12109,13 +12138,18 @@ msgid "Number of available audio buses."
 msgstr "可用音频总线的数量。"
 
 #: doc/classes/AudioServer.xml
-msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+#, fuzzy
+msgid ""
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 "当前音频输出设备的名称（见 [method get_device_list]）。在具有多个音频输出的系"
 "统中（例如模拟、USB、HDMI 音频），可用于选择音频输出设备。为 "
@@ -12304,6 +12338,21 @@ msgstr ""
 "[method push_buffer] 效率低，但在 GDScript 中 [method push_frame] 可能[i]更高"
 "效[/i]。"
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr "MP3 音频流驱动程序。"
@@ -12323,7 +12372,7 @@ msgstr "如果为 [code]true[/code]，当流到达末尾时将自动循环。"
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 #: modules/stb_vorbis/doc_classes/AudioStreamOGGVorbis.xml
 msgid "Time in seconds at which the stream starts after being looped."
-msgstr "循环后流开始的时间（秒）。"
+msgstr "循环时，流开始的时间，单位为秒。"
 
 #: modules/stb_vorbis/doc_classes/AudioStreamOGGVorbis.xml
 msgid "OGG Vorbis audio stream driver."
@@ -12455,8 +12504,12 @@ msgid "Plays positional sound in 2D space."
 msgstr "在 2D 空间中播放与位置相关的声音。"
 
 #: doc/classes/AudioStreamPlayer2D.xml
+#, fuzzy
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -12464,10 +12517,10 @@ msgid ""
 "audible to human hearing)."
 msgstr ""
 "播放音频，随着与屏幕中心的距离而减弱。\n"
-"参阅 [AudioStreamPlayer] 来播放非位置性的声音。\n"
-"[b]注意：[/b]隐藏一个 [AudioStreamPlayer2D] 节点并不能禁用其音频输出。要暂时"
-"禁用 [AudioStreamPlayer2D] 的音频输出，请将 [member volume_db] 设置为一个非常"
-"低的值，如[code]-100[/code]（人的听觉听不到）。"
+"另请参阅 [AudioStreamPlayer] 来播放非位置性的声音。\n"
+"[b]注意：[/b]隐藏 [AudioStreamPlayer2D] 节点并不能禁用其音频输出。要暂时禁用 "
+"[AudioStreamPlayer2D] 的音频输出，请将 [member volume_db] 设置为非常低的值，"
+"如 [code]-100[/code]（人的听觉听不到）。"
 
 #: doc/classes/AudioStreamPlayer2D.xml doc/classes/AudioStreamPlayer3D.xml
 msgid "Returns the position in the [AudioStream]."
@@ -12530,14 +12583,14 @@ msgid ""
 "audible to human hearing)."
 msgstr ""
 "播放具有定向性的声音效果，如果需要，可随着距离的增加而减弱，产生空间中可听到"
-"的位置效果。为了更逼真，低通滤波器会自动应用于远处的声音。这可以通过设置"
-"[member attenuation_filter_cutoff_hz]为[code]20500[/code]来禁用。\n"
-"默认情况下，音频是从相机的位置听到的，这可以通过在场景中添加一个[Listener]节"
-"点，并通过对其调用[method Listener.make_current]来启用它，以改变。\n"
-"参阅[AudioStreamPlayer]来播放非位置的声音。\n"
-"[b]注意：[/b]隐藏一个[AudioStreamPlayer3D]节点并不能禁用其音频输出。要暂时禁"
-"用[AudioStreamPlayer3D]的音频输出，请将[member unit_db]设置为一个非常低的值，"
-"如[code]-100[/code]（人的听觉听不到）。"
+"的位置效果。为了更逼真，低通滤波器会自动应用于远处的声音。这可以通过设置 "
+"[member attenuation_filter_cutoff_hz] 为 [code]20500[/code] 来禁用。\n"
+"默认情况下，音频是从相机的位置听到的，这可以通过在场景中添加一个 [Listener] "
+"节点，并通过对其调用 [method Listener.make_current] 来启用它，以改变。\n"
+"参阅 [AudioStreamPlayer] 来播放非位置的声音。\n"
+"[b]注意：[/b]隐藏一个 [AudioStreamPlayer3D] 节点并不能禁用其音频输出。要暂时"
+"禁用 [AudioStreamPlayer3D] 的音频输出，请将 [member unit_db] 设置为一个非常低"
+"的值，如 [code]-100[/code]（人的听觉听不到）。"
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
@@ -12609,8 +12662,9 @@ msgid ""
 "doppler_tracking] property is set to a value other than [constant Camera."
 "DOPPLER_TRACKING_DISABLED]."
 msgstr ""
-"决定 [url=https://en.wikipedia.org/wiki/Doppler_effect]多普勒效应[/url] 应该"
-"在哪一步计算。\n"
+"决定[url=https://zh.wikipedia.org/wiki/"
+"%E5%A4%9A%E6%99%AE%E5%8B%92%E6%95%88%E5%BA%94]多普勒效应[/url]应该在哪一步计"
+"算。\n"
 "[b]注意：[/b]仅当当前 [Camera] 的 [member Camera.doppler_tracking] 属性设置"
 "为 [constant Camera.DOPPLER_TRACKING_DISABLED] 以外的值时有效。"
 
@@ -12640,7 +12694,7 @@ msgstr "设置声级的绝对最大值，以分贝为单位。"
 msgid ""
 "Sets the distance from which the [member out_of_range_mode] takes effect. "
 "Has no effect if set to 0."
-msgstr "设置[member out_of_range_mode]生效的距离。设置为0时没有效果。"
+msgstr "设置 [member out_of_range_mode] 生效的距离。设置为 0 时没有效果。"
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
@@ -12785,7 +12839,7 @@ msgstr ""
 
 #: doc/classes/AudioStreamSample.xml
 msgid "Audio format. See [enum Format] constants for values."
-msgstr "音频格式。参阅 [enum Format] 常量的值。"
+msgstr "音频格式。取值见 [enum Format] 常量。"
 
 #: doc/classes/AudioStreamSample.xml
 msgid ""
@@ -13151,7 +13205,7 @@ msgid ""
 "When enabled, a lightmap denoiser will be used to reduce the noise inherent "
 "to Monte Carlo based global illumination."
 msgstr ""
-"启用后，将使用光照贴图降噪器来减少基于Monte Carlo的全局照明固有的噪声。"
+"启用后，将使用光照贴图降噪器来减少基于 Monte Carlo 的全局照明固有的噪声。"
 
 #: doc/classes/BakedLightmap.xml
 msgid ""
@@ -13197,12 +13251,12 @@ msgid ""
 "Returns if no viable save path is found. This can happen where an [member "
 "image_path] is not specified or when the save location is invalid."
 msgstr ""
-"如果没有找到合适的保存路径，则返回。这可能发生在没有指定[member image_path]或"
-"者保存位置无效的情况下。"
+"如果没有找到合适的保存路径，则返回。这可能发生在没有指定 [member image_path] "
+"或者保存位置无效的情况下。"
 
 #: doc/classes/BakedLightmap.xml doc/classes/SpatialMaterial.xml
 msgid "Currently unused."
-msgstr "当前未使用."
+msgstr "当前未使用。"
 
 #: doc/classes/BakedLightmap.xml
 msgid "Returns when the baker cannot save per-mesh textures to file."
@@ -13753,7 +13807,7 @@ msgstr ""
 #: doc/classes/BitMap.xml
 msgid ""
 "Creates a bitmap with the specified size, filled with [code]false[/code]."
-msgstr "创建一个指定尺寸的位图，用[code]false[/code]填充。"
+msgstr "创建一个指定尺寸的位图，用 [code]false[/code] 填充。"
 
 #: doc/classes/BitMap.xml
 msgid ""
@@ -13777,7 +13831,7 @@ msgstr "返回位图的尺寸。"
 #: doc/classes/BitMap.xml
 msgid ""
 "Returns the amount of bitmap elements that are set to [code]true[/code]."
-msgstr "返回设置为 [code]true[/code]的位图元素的数量。"
+msgstr "返回设置为 [code]true[/code] 的位图元素的数量。"
 
 #: doc/classes/BitMap.xml
 msgid ""
@@ -13811,9 +13865,9 @@ msgid ""
 "bmfont/]BMFont[/url] format.\n"
 "Handles files with the [code].fnt[/code] extension."
 msgstr ""
-"使用[url=https://www.angelcode.com/products/bmfont/]BMFont[/url]格式的字体来"
-"渲染文本。\n"
-"处理扩展名为[code].fnt[/code]的文件。"
+"使用 [url=https://www.angelcode.com/products/bmfont/]BMFont[/url] 格式的字体"
+"来渲染文本。\n"
+"处理扩展名为 [code].fnt[/code] 的文件。"
 
 #: doc/classes/BitmapFont.xml
 msgid ""
@@ -14262,7 +14316,7 @@ msgstr "将文本向左对齐。"
 
 #: doc/classes/Button.xml
 msgid "Align the text to the center."
-msgstr "将文本居中对齐。。"
+msgstr "将文本居中对齐。"
 
 #: doc/classes/Button.xml
 msgid "Align the text to the right."
@@ -14413,7 +14467,7 @@ msgid ""
 "[code]enable_next[/code] is [code]true[/code], request to make the next "
 "camera current, if any."
 msgstr ""
-"如果这是当前相机，则将其从当前相机中移除。如果[code]enable_next[/code]是"
+"如果这是当前相机，则将其从当前相机中移除。如果 [code]enable_next[/code] 为 "
 "[code]true[/code]，请求使下一个相机成为当前相机（如果有）。"
 
 #: doc/classes/Camera.xml
@@ -14436,8 +14490,8 @@ msgid ""
 "Returns [code]true[/code] if the given [code]layer[/code] in the [member "
 "cull_mask] is enabled, [code]false[/code] otherwise."
 msgstr ""
-"如果[member cull_mask]中给定的[code]layer[/code]被启用，返回 [code]true[/"
-"code]，否则返回 [code]false[/code]。"
+"如果 [member cull_mask] 中给定的 [code]layer[/code] 被启用，则返回 "
+"[code]true[/code]，否则返回 [code]false[/code]。"
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -14507,14 +14561,15 @@ msgstr ""
 #: doc/classes/Camera.xml
 msgid ""
 "Enables or disables the given [code]layer[/code] in the [member cull_mask]."
-msgstr "启用或禁用[member cull_mask]中给定的[code]layer[/code]。"
+msgstr "启用或禁用 [member cull_mask] 中给定的 [code]layer[/code]。"
 
 #: doc/classes/Camera.xml
+#, fuzzy
 msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 "通过指定大小 [code]size[/code] 、偏移量 [code]offset[/code] 以及以世界空间为"
 "单位的 [code]z_near[/code] 和 [code]z_far[/code] 裁剪平面，将相机投影设置为视"
@@ -14643,10 +14698,13 @@ msgstr ""
 "- 在 21:9 视窗中约117.06 度"
 
 #: doc/classes/Camera.xml
+#, fuzzy
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 "相机的机身偏移。可以更改默认值，以创建 \"倾斜frustum \"效果，如[url=https://"
 "zdoom.org/wiki/Y-shearing]Y-shearing[/url]。"
@@ -14680,12 +14738,10 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
-"相机的尺寸，以 1/2 的宽度或高度为单位。仅适用于正交及视锥模式。由于 [member "
-"keep_aspect] 锁定在轴上，因此 [code]size[/code] 设置其他轴的尺寸长度。"
 
 #: doc/classes/Camera.xml
 msgid "The vertical (Y) offset of the camera viewport."
@@ -14860,7 +14916,7 @@ msgstr ""
 msgid ""
 "Make this the current 2D camera for the scene (viewport and layer), in case "
 "there are many cameras in the scene."
-msgstr "使之成为场景（视窗和图层）的当前 2D 相机，以防场景中有很多相机。"
+msgstr "使之成为该场景（视区和图层）的当前 2D 相机，以防场景中有很多相机。"
 
 #: doc/classes/Camera2D.xml
 msgid ""
@@ -14906,8 +14962,8 @@ msgid ""
 "The custom [Viewport] node attached to the [Camera2D]. If [code]null[/code] "
 "or not a [Viewport], uses the default viewport instead."
 msgstr ""
-"连接到[Camera2D]的自定义[Viewport]节点。如果[code]null[/code]或不是"
-"[Viewport]，则使用默认的 Viewpor。"
+"连接到 [Camera2D] 的自定义 [Viewport] 节点。如果为 [code]null[/code] 或者不"
+"是 [Viewport]，则使用默认的视区。"
 
 #: doc/classes/Camera2D.xml
 msgid ""
@@ -15038,7 +15094,7 @@ msgstr ""
 
 #: doc/classes/Camera2D.xml
 msgid "The camera's process callback. See [enum Camera2DProcessMode]."
-msgstr "相机的过程回调。请参阅[enum Camera2DProcessMode]。"
+msgstr "相机的过程回调。见 [enum Camera2DProcessMode]。"
 
 #: doc/classes/Camera2D.xml
 msgid "If [code]true[/code], the camera view rotates with the target."
@@ -15264,18 +15320,20 @@ msgid "Base class of anything 2D."
 msgstr "任何 2D 对象的基类。"
 
 #: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
 "Base class of anything 2D. Canvas items are laid out in a tree; children "
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -15317,10 +15375,18 @@ msgid "Custom drawing in 2D"
 msgstr "2D 中的自定义绘图"
 
 #: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
-msgstr "引擎调用的可覆盖函数（如果定义了）来绘制画布项目。"
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
+msgstr ""
+"当节点进入 [SceneTree] 时调用（例如实例化时，场景改变时，或者在脚本中调用 "
+"[method add_child] 后）。如果节点有子节点，则首先调用它的 [method "
+"_enter_tree] 回调函数，然后再调用子节点的回调函数。\n"
+"对应于 [method Object._notification] 中的 [constant NOTIFICATION_ENTER_TREE] "
+"通知。"
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -15721,7 +15787,7 @@ msgstr "返回这个项目相对于视区的变换。"
 
 #: doc/classes/CanvasItem.xml
 msgid "Returns the [World2D] where this item is in."
-msgstr "返回此物品所在的[World2D]。"
+msgstr "返回此物品所在的 [World2D]。"
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -15742,7 +15808,7 @@ msgid ""
 "Returns [code]true[/code] if the node is set as top-level. See [method "
 "set_as_toplevel]."
 msgstr ""
-"如果节点设置为顶层，则返回 [code]true[/code]。参阅 [method set_as_toplevel]。"
+"如果节点设置为顶层，则返回 [code]true[/code]。见 [method set_as_toplevel]。"
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -15750,12 +15816,13 @@ msgid ""
 "to children."
 msgstr "如果将全局变换通知传达给子级，则返回 [code]true[/code]。"
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
+#, fuzzy
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 "如果该节点位于 [SceneTree] 中，并且其 [member visible] 属性为 [code]true[/"
 "code]，并且其所有上层节点也均可见，则返回 [code]true[/code]。如果任何上层节点"
@@ -15814,11 +15881,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
-"将 [CanvasItem] 排队等待更新。在空闲时间将调用 [constant NOTIFICATION_DRAW] "
-"以请求重绘。"
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -15873,10 +15940,12 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
-"当 [CanvasItem] 必须重绘时发出。这只能是实时连接，因为延迟将不允许绘制。"
 
 #: doc/classes/CanvasItem.xml
 msgid "Emitted when becoming hidden."
@@ -15945,7 +16014,8 @@ msgstr ""
 "set_notify_local_transform] 启用时，才会收到这个通知。"
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+#, fuzzy
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr "要求绘制[CanvasItem]。"
 
 #: doc/classes/CanvasItem.xml
@@ -16097,9 +16167,12 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
-msgstr "将图层设置为跟随视区，以模拟伪 3D 效果。"
+msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
@@ -16642,10 +16715,10 @@ msgid ""
 "[b]Note:[/b] In exported release builds the debug info is not available, so "
 "the returned dictionaries will contain only method names."
 msgstr ""
-"如果[code]no_inheritance[/code]是[code]false[/code]，返回一个包含"
-"[code]class[/code]或其父级所有方法的数组。数组的每个元素都是一个"
-"[Dictionary]，其键值如:[code]args[/code], [code]default_args[/code], "
-"[code]flags[/code], [code]id[/code], [code]name[/code], [code]return:"
+"如果 [code]no_inheritance[/code] 为 [code]false[/code]，返回一个包含 "
+"[code]class[/code] 或其父级所有方法的数组。数组的每个元素都是一个 "
+"[Dictionary]，包含的键有：[code]args[/code]、[code]default_args[/code]、"
+"[code]flags[/code]、[code]id[/code]、[code]name[/code]、[code]return:"
 "(class_name, hint, hint_string, name, type, usage)[/code]。\n"
 "[b]注意：[/b]在导出的发布版本中，调试信息不可用，所以返回的字典将只包含方法名"
 "称。"
@@ -16895,8 +16968,8 @@ msgid ""
 "Returns an [Array] of [code]owner_id[/code] identifiers. You can use these "
 "ids in other methods that take [code]owner_id[/code] as an argument."
 msgstr ""
-"返回一个[code]owner_id[/code]标识符的[Array]。你可以在其他使用"
-"[code]owner_id[/code]作为参数的方法中使用这些id。"
+"返回一个 [code]owner_id[/code] 标识符的 [Array]。你可以在其他使用 "
+"[code]owner_id[/code] 作为参数的方法中使用这些id。"
 
 #: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
 msgid "If [code]true[/code], the shape owner and its shapes are disabled."
@@ -17546,10 +17619,10 @@ msgid ""
 "var darkgreen = green.darkened(0.2) # 20% darker than regular green\n"
 "[/codeblock]"
 msgstr ""
-"返回一个新的颜色，这个颜色按指定的百分比（比例从0 到 1）变暗。\n"
+"返回一个新的颜色，这个颜色按指定的百分比（比例从 0 到 1）变暗。\n"
 "[codeblock]\n"
 "var green = Color(0.0, 1.0, 0.0)\n"
-"var darkgreen = green.darkened(0.2) # 20% darker than regular green\n"
+"var darkgreen = green.darkened(0.2) # 比普通的绿色深 20%\n"
 "[/codeblock]"
 
 #: doc/classes/Color.xml
@@ -19799,8 +19872,10 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
-msgstr "从另一个控件中窃取焦点，并成为焦点控件（请参阅[member focus_mode]）。"
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
+msgstr ""
 
 #: doc/classes/Control.xml
 msgid ""
@@ -19955,9 +20030,9 @@ msgid ""
 "changed. Setting [member rect_min_size] directly calls this method "
 "automatically."
 msgstr ""
-"使此节点和父节点（直至最高级别）中的大小缓存无效。打算在更改返回值时与"
-"[method get_minimum_size]一起使用。设置[member rect_min_size]直接直接自动调用"
-"此方法。"
+"使这个节点及其直至最顶层的各级父节点中的大小缓存失效。应在 [method "
+"get_minimum_size] 的返回值发生变化时配合使用。直接设置 [member "
+"rect_min_size] 会自动调用这个方法。"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20300,10 +20375,10 @@ msgid ""
 "must be a [Control]. If this property is not set, Godot will give focus to "
 "the closest [Control] to the bottom of this one."
 msgstr ""
-"告诉Godot，默认情况下，如果用户按下键盘上的向下箭头或游戏手柄上的向下箭头，则"
-"应将焦点对准哪个节点。您可以通过编辑[code]ui_down[/code]输入操作来更改键。该"
-"节点必须是[Control]。如果未设置此属性，则Godot会将焦点放在该控件底部最接近的"
-"[Control]。"
+"告诉 Godot，默认情况下，如果用户按下键盘上的向下箭头或游戏手柄上的向下箭头，"
+"则应将焦点对准哪个节点。您可以通过编辑 [code]ui_down[/code] 输入操作来更改"
+"键。该节点必须是 [Control]。如果未设置此属性，则 Godot 会将焦点放在该控件底部"
+"最接近的 [Control]。"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20313,10 +20388,10 @@ msgid ""
 "must be a [Control]. If this property is not set, Godot will give focus to "
 "the closest [Control] to the left of this one."
 msgstr ""
-"告诉Godot，默认情况下，如果用户按下键盘上的向左箭头或游戏手柄上的向左键，应该"
-"将焦点对准键盘上的哪个节点。您可以通过编辑[code]ui_left[/code]输入操作来更改"
-"键。该节点必须是[Control]。如果未设置此属性，则Godot会将焦点放在该控件左侧最"
-"接近的[Control]。"
+"告诉 Godot，默认情况下，如果用户按下键盘上的向左箭头或游戏手柄上的向左键，应"
+"该将焦点对准键盘上的哪个节点。您可以通过编辑 [code]ui_left[/code] 输入操作来"
+"更改键。该节点必须是 [Control]。如果未设置此属性，则 Godot 会将焦点放在该控件"
+"左侧最接近的 [Control]。"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20326,10 +20401,10 @@ msgid ""
 "must be a [Control]. If this property is not set, Godot will give focus to "
 "the closest [Control] to the bottom of this one."
 msgstr ""
-"告诉Godot，如果用户按键盘上的右键或默认的游戏手柄上的右键，它应该把键盘焦点给"
-"哪个节点。你可以通过编辑[code]ui_right[/code]输入动作来改变这个键。该节点必须"
-"是一个[Control]。如果没有设置这个属性，Godot将把焦点交给离这个节点底部最近的"
-"[Control]。"
+"告诉 Godot，如果用户按键盘上的右键或默认的游戏手柄上的右键，它应该把键盘焦点"
+"给哪个节点。你可以通过编辑 [code]ui_right[/code] 输入动作来改变这个键。该节点"
+"必须是一个 [Control]。如果没有设置这个属性，Godot 将把焦点交给离这个节点底部"
+"最近的 [Control]。"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20339,10 +20414,10 @@ msgid ""
 "[Control]. If this property is not set, Godot will give focus to the closest "
 "[Control] to the bottom of this one."
 msgstr ""
-"告诉Godot默认情况下，如果用户按下键盘上的顶部箭头或游戏手柄上的顶部，则应该将"
-"焦点对准键盘上的哪个节点。您可以通过编辑[code]ui_top[/code]输入操作来更改键。"
-"该节点必须是[Control]。如果未设置此属性，则Godot会将焦点放在该控件底部最接近"
-"的[Control]。"
+"告诉 Godot 默认情况下，如果用户按下键盘上的顶部箭头或游戏手柄上的顶部，则应该"
+"将焦点对准键盘上的哪个节点。您可以通过编辑 [code]ui_top[/code] 输入操作来更改"
+"键。该节点必须是 [Control]。如果未设置此属性，则 Godot 会将焦点放在该控件底部"
+"最接近的 [Control]。"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20352,9 +20427,9 @@ msgid ""
 "If this property is not set, Godot will select a \"best guess\" based on "
 "surrounding nodes in the scene tree."
 msgstr ""
-"告诉Godot，如果用户默认按键盘上的Tab键，它应该把键盘焦点给哪个节点。你可以通"
-"过编辑[code]ui_focus_next[/code]输入动作来改变这个键。\n"
-"如果这个属性没有设置，Godot会根据场景树中的周围节点选择一个 \"最佳猜测\"。"
+"告诉 Godot，如果用户默认按键盘上的 Tab 键，它应该把键盘焦点给哪个节点。你可以"
+"通过编辑 [code]ui_focus_next[/code] 输入动作来改变这个键。\n"
+"如果这个属性没有设置，Godot 会根据场景树中的周围节点选择一个“最佳猜测”。"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20364,9 +20439,9 @@ msgid ""
 "If this property is not set, Godot will select a \"best guess\" based on "
 "surrounding nodes in the scene tree."
 msgstr ""
-"告诉Godot，如果用户按键盘上的Shift+Tab键，它应该把键盘焦点给哪个节点，这是默"
-"认。你可以通过编辑[code]ui_focus_prev[/code]输入动作来改变这个键。\n"
-"如果没有设置这个属性，Godot会根据场景树中的周围节点选择一个 \"最佳猜测\"。"
+"告诉 Godot，如果用户按键盘上的 Shift+Tab 键，它应该把键盘焦点给哪个节点，这是"
+"默认。你可以通过编辑 [code]ui_focus_prev[/code] 输入动作来改变这个键。\n"
+"如果没有设置这个属性，Godot 会根据场景树中的周围节点选择一个“最佳猜测”。"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20409,18 +20484,19 @@ msgid ""
 "[/codeblock]"
 msgstr ""
 "改变工具提示的文本。当用户的鼠标光标在这个控件上停留片刻，工具提示就会出现，"
-"前提是[member mouse_filter]属性非[constant MOUSE_FILTER_IGNORE]。你可以用项目"
-"设置中的[code]gui/timers/tooltip_delay_sec[/code]选项改变工具提示出现的时"
-"间。\n"
-"工具提示的弹出将使用默认的实现，或者你可以通过覆盖[method "
-"_make_custom_tooltip]提供一个自定义的实现。默认的工具提示包括一个[PopupPanel]"
-"和[Label]，其主题属性可以通过[code]\"TooltipPanel\"[/code]和"
-"[code]\"TooltipLabel\"[/code]方法分别进行自定义。如:\n"
+"前提是 [member mouse_filter] 属性非 [constant MOUSE_FILTER_IGNORE]。你可以用"
+"项目设置中的 [code]gui/timers/tooltip_delay_sec[/code] 选项改变工具提示出现的"
+"时间。\n"
+"工具提示的弹出将使用默认的实现，或者你可以通过覆盖 [method "
+"_make_custom_tooltip] 提供一个自定义的实现。默认的工具提示包括一个 "
+"[PopupPanel] 和 [Label]，其主题属性可以通过 [Theme] 的方法对 "
+"[code]\"TooltipPanel\"[/code] 和 [code]\"TooltipLabel\"[/code] 分别进行自定"
+"义。如：\n"
 "[codeblock]\n"
 "var style_box = StyleBoxFlat.new()\n"
 "style_box.set_bg_color(Color(1, 1, 0))\n"
 "style_box.set_border_width_all(2)\n"
-"# 我们在这里假设`theme`属性已经被事先分配了一个自定义的Theme。\n"
+"# 我们在这里假设`theme`属性已经被事先分配了一个自定义的 Theme。\n"
 "theme.set_stylebox(\"panel\", \"TooltipPanel\", style_box)\n"
 "theme.set_color(\"font_color\", \"TooltipLabel\", Color(0, 1, 1))\n"
 "[/codeblock]"
@@ -20432,9 +20508,9 @@ msgid ""
 "handling. The viewport first hides the modal and after marks the input as "
 "handled."
 msgstr ""
-"启用当你关闭控件模态时，输入是否传播。\n"
-"如果为 [code]false[/code]，在视区输入事件处理时将停止事件处理。视区首先隐藏模"
-"态，之后将输入标记为已处理。"
+"关闭模态控件时，输入是否传播。\n"
+"如果为 [code]false[/code]，事件处理将停止在视区的输入事件处理。该视区会先将模"
+"态控件隐藏，然后再将输入标记为已处理。"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -21324,7 +21400,7 @@ msgstr "返回由 [enum Parameter] 指定的参数的随机性系数。"
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid ""
 "Returns the enabled state of the given flag (see [enum Flags] for options)."
-msgstr "返回给定标志的启用状态（有关选项，请参阅 [enum Flags]）。"
+msgstr "返回给定标志的启用状态（可选项见 [enum Flags]）。"
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid "Restarts the particle emitter."
@@ -21345,7 +21421,7 @@ msgstr "设置 [enum Parameter] 指定的参数的随机性因子。"
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid "Enables or disables the given flag (see [enum Flags] for options)."
-msgstr "启用或禁用给定标志（有关选项，请参阅 [enum Flags]）。"
+msgstr "启用或禁用给定标志（可选项见 [enum Flags]）。"
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/Particles.xml doc/classes/Particles2D.xml
@@ -21463,7 +21539,7 @@ msgstr "指定粒子发射方向的单位向量。"
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/Particles.xml doc/classes/Particles2D.xml
 msgid "Particle draw order. Uses [enum DrawOrder] values."
-msgstr "粒子绘制顺序。使用 [enum DrawOrder] 值。"
+msgstr "粒子绘制顺序。使用 [enum DrawOrder] 的值。"
 
 #: doc/classes/CPUParticles.xml
 msgid ""
@@ -21611,7 +21687,7 @@ msgstr "色相变化随机率。"
 msgid ""
 "Initial velocity magnitude for each particle. Direction comes from [member "
 "spread] and the node's orientation."
-msgstr "每个粒子的初始速度大小。方向来自[member spread]和节点的方向。"
+msgstr "每个粒子的初始速度大小。方向取决于 [member spread] 和该节点的朝向。"
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/ParticlesMaterial.xml
@@ -21621,7 +21697,7 @@ msgstr "初始速度随机率。"
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/Particles.xml doc/classes/Particles2D.xml
 msgid "The amount of time each particle will exist (in seconds)."
-msgstr "每个粒子存在的时间，以秒为单位。"
+msgstr "每个粒子存在的时间（以秒为单位）。"
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/ParticlesMaterial.xml
@@ -21677,7 +21753,7 @@ msgid ""
 msgstr ""
 "应用于每个粒子的轨道速度。使粒子在局部XY平面上绕原点旋转。用每秒绕原点旋转的"
 "次数来表示。\n"
-"只有当[member flag_disable_z]为 [code]true[/code] 时，此属性才可用。"
+"只有当 [member flag_disable_z] 为 [code]true[/code] 时，此属性才可用。"
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid "Each particle's orbital velocity will vary along this [Curve]."
@@ -21998,8 +22074,8 @@ msgid ""
 "the value to 2 will make the particles render at 2 frames per second. Note "
 "this does not slow down the simulation of the particle system itself."
 msgstr ""
-"粒子系统的帧速率固定为一个值。例如，将值更改为2将使粒子以每秒2帧的速度渲染。"
-"注意，这不会减慢粒子系统本身的仿真速度。"
+"粒子系统的帧速率固定为一个值。例如，将值更改为 2 将使粒子以每秒 2 帧的速度渲"
+"染。注意，这不会减慢粒子系统本身的仿真速度。"
 
 #: doc/classes/CPUParticles2D.xml doc/classes/Particles2D.xml
 msgid ""
@@ -22146,8 +22222,8 @@ msgid ""
 "[b]Note:[/b] The maximum size of accepted ciphertext is limited by the key "
 "size."
 msgstr ""
-"用提供的私人[code]key[/code]解密给定的[code]ciphertext[/code]。\n"
-"[b]注意：[/b]所接受的密码文本的最大尺寸受到密钥大小限制。"
+"用提供的私钥 [code]key[/code] 解密给定的密文 [code]ciphertext[/code]。\n"
+"[b]注意：[/b]所接受的密文的最大尺寸受到密钥大小的限制。"
 
 #: doc/classes/Crypto.xml
 msgid ""
@@ -22156,8 +22232,8 @@ msgid ""
 "[b]Note:[/b] The maximum size of accepted plaintext is limited by the key "
 "size."
 msgstr ""
-"用提供的公钥 [code]key[/code] 加密给定的[code]plaintext[/code]。\n"
-"[b]注意：[/b]接受的明文的最大尺寸受到密钥大小的限制。"
+"用提供的公钥 [code]key[/code] 加密给定的明文 [code]plaintext[/code]。\n"
+"[b]注意：[/b]所接受的明文的最大尺寸受到密钥大小的限制。"
 
 #: doc/classes/Crypto.xml
 msgid ""
@@ -22217,9 +22293,9 @@ msgid ""
 "Currently, only [constant HashingContext.HASH_SHA256] and [constant "
 "HashingContext.HASH_SHA1] are supported."
 msgstr ""
-"使用 [code]key[/code] 生成 [code]msg[/code] 的 [url=https://en.wikipedia.org/"
-"wiki/HMAC]HMAC[/url] 摘要。[code]hash_type[/code] 参数是用于内部和外部哈希的"
-"哈希算法。\n"
+"使用密钥 [code]key[/code] 生成 [code]msg[/code] 的 [url=https://en.wikipedia."
+"org/wiki/HMAC]HMAC[/url] 摘要。[code]hash_type[/code] 参数是用于内部和外部哈"
+"希的哈希算法。\n"
 "目前仅支持 [constant HashingContext.HASH_SHA256] 和 [constant HashingContext."
 "HASH_SHA1]。"
 
@@ -22591,7 +22667,7 @@ msgid ""
 "coordinates will match geometry exactly with no tiling."
 msgstr ""
 "当 [member mode] 为 [constant MODE_PATH] 时，这是纹理坐标沿着路径的距离，以米"
-"为单位，将进行平铺。当设置为0时，纹理坐标将与几何图形完全匹配，没有平铺。"
+"为单位，将进行平铺。当设置为 0 时，纹理坐标将与几何图形完全匹配，没有平铺。"
 
 #: modules/csg/doc_classes/CSGPolygon.xml
 msgid ""
@@ -22671,16 +22747,16 @@ msgid ""
 "will determine the distance, in meters, each interval of the path will "
 "extrude."
 msgstr ""
-"当 [member mode] 被设置为路径[constant MODE_PATH] 时，[member path_interval] "
-"将决定路径的每个间隔将被挤出的距离，单位为米。"
+"当 [member mode] 被设置为 [constant MODE_PATH] 时，[member path_interval] 将"
+"决定路径的每个间隔将被挤出的距离，单位为米。"
 
 #: modules/csg/doc_classes/CSGPolygon.xml
 msgid ""
 "When [member mode] is set to [constant MODE_PATH], [member path_interval] "
 "will subdivide the polygons along the path."
 msgstr ""
-"当 [member mode] 被设置为路径 [constant MODE_PATH]时，[member path_interval] "
-"将沿着路径细分多边形。"
+"当 [member mode] 被设置为 [constant MODE_PATH]时，[member path_interval] 将沿"
+"着路径细分多边形。"
 
 #: modules/csg/doc_classes/CSGPrimitive.xml
 msgid "Base class for CSG primitives."
@@ -22806,8 +22882,8 @@ msgid ""
 "CSG child node as the operation is between this node and the previous child "
 "of this nodes parent."
 msgstr ""
-"在此形状上执行的操作。对于第一个CSG子节点，将忽略此操作，因为操作是在此节点与"
-"该节点父级的上一个子级之间进行的。"
+"在此形状上执行的操作。对于第一个 CSG 子节点，将忽略此操作，因为操作是在此节点"
+"与该节点父级的上一个子级之间进行的。"
 
 #: modules/csg/doc_classes/CSGShape.xml
 msgid ""
@@ -22824,8 +22900,8 @@ msgid ""
 "always act like a static body. Note that the collision shape is still active "
 "even if the CSG shape itself is hidden."
 msgstr ""
-"为我们的 CSG 形状向物理引擎添加碰撞形状。这将始终像一个静态物体。请注意，即使"
-"CSG形状本身被隐藏，碰撞形状仍处于活动状态。"
+"为我们的 CSG 形状向物理引擎添加碰撞形状。这将始终像一个静态物体。请注意，即"
+"使 CSG 形状本身被隐藏，碰撞形状仍处于活动状态。"
 
 #: modules/csg/doc_classes/CSGShape.xml
 msgid ""
@@ -22930,8 +23006,8 @@ msgid ""
 "effect making the torus seem rounded. If [code]false[/code] the torus will "
 "have a flat shaded look."
 msgstr ""
-"如果[code]true[/code]设置圆环的法线以提供平滑效果，则使圆环看起来是圆形的。如"
-"果为 [code]false[/code]，则圆环将具有平坦的阴影表现。"
+"如果 [code]true[/code] 设置圆环的法线以提供平滑效果，则使圆环看起来是圆形的。"
+"如果为 [code]false[/code]，则圆环将具有平坦的阴影表现。"
 
 #: modules/mono/doc_classes/CSharpScript.xml
 msgid ""
@@ -23240,10 +23316,13 @@ msgid "A mathematic curve."
 msgstr "数学曲线。"
 
 #: doc/classes/Curve.xml
+#, fuzzy
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 "可以保存并重新用于其他对象的曲线。默认情况下，它在 Y 轴上的范围在 [code]0[/"
 "code] 到 [code]1[/code] 之间，并且位置点相对于 [code]0.5[/code] Y 位置。"
@@ -23407,16 +23486,18 @@ msgstr ""
 "动采样用于其他目的。\n"
 "它保留了沿曲线的预计算点的缓存，以加快进一步的计算。"
 
-#: doc/classes/Curve2D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
+#, fuzzy
+msgid ""
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 "在曲线的 [code]position[/code] 上添加一个点，相对于该 [Curve2D] 的位置，以及"
 "控制点 [code]in[/code] 和 [code]out[/code]。\n"
@@ -23476,8 +23557,8 @@ msgid ""
 "console, and returns [code](0, 0)[/code]."
 msgstr ""
 "返回从顶点 [code]idx[/code] 引出的控制点位置。返回的位置是相对于顶点 "
-"[code]idx[/code]。如果索引越界，函数会向控制台发送错误，并返回 [code](0, "
-"0)[/code]。"
+"[code]idx[/code]。如果索引越界，函数会向控制台发送错误，并返回 [code](0, 0)[/"
+"code]。"
 
 #: doc/classes/Curve2D.xml
 msgid ""
@@ -23621,25 +23702,6 @@ msgstr ""
 "它沿曲线保留了一个预先计算好的点缓存，以加快进一步的计算。"
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-"在曲线的 [code]position[/code] 上添加一个点，相对于该 [Curve2D] 的位置，以及"
-"控制点 [code]in[/code] 和 [code]out[/code]。\n"
-"如果给定了 [code]at_position[/code]，这个点会被插入到点号 [code]at_position[/"
-"code] 之前，并将这个点（以及之后的每一个点）移到被插入点之后。如果 "
-"[code]at_position[/code] 没有给定，或者是非法值（[code]at_position <0[/code] "
-"或 [code]at_position >= [method get_point_count][/code]），该点将被追加在点列"
-"表的最后。"
-
-#: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "以 [PoolVector3Array] 的形式返回缓存的点。"
 
@@ -24599,7 +24661,7 @@ msgid ""
 "Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
 msgstr ""
 "创建一个目录。参数可以是当前目录的相对路径，也可以是绝对路径。目标目录应该放"
-"置在一个已经存在的目录中（如果要递归创建完整的路径，请参阅[method "
+"置在一个已经存在的目录中（如果要递归创建完整的路径，请参阅 [method "
 "make_dir_recursive]）。\n"
 "返回 [enum Error] 代码常量之一（成功时返回 [code]OK[/code]）。"
 
@@ -24886,11 +24948,11 @@ msgstr "返回给定 [code]type[/code] 的间距（见 [enum SpacingType]）。"
 
 #: doc/classes/DynamicFont.xml
 msgid "Removes the fallback font at index [code]idx[/code]."
-msgstr "移除位于索引[code]idx[/code]处的后备字体。"
+msgstr "移除位于索引 [code]idx[/code] 处的后备字体。"
 
 #: doc/classes/DynamicFont.xml
 msgid "Sets the fallback font at index [code]idx[/code]."
-msgstr "设置索引[code]idx[/code]处的后备字体。"
+msgstr "设置索引 [code]idx[/code] 处的后备字体。"
 
 #: doc/classes/DynamicFont.xml
 msgid ""
@@ -25013,7 +25075,7 @@ msgstr "矢量字体文件的路径。"
 
 #: doc/classes/DynamicFontData.xml
 msgid "The font hinting mode used by FreeType. See [enum Hinting] for options."
-msgstr "FreeType 使用的字体提示模式。参阅 [enum Hinting] 选项。"
+msgstr "FreeType 使用的字体提示模式。可选项见 [enum Hinting]。"
 
 #: doc/classes/DynamicFontData.xml
 msgid ""
@@ -25237,8 +25299,8 @@ msgid ""
 "specified by [code]class_name[/code]."
 msgstr ""
 "如果 [code]class_name[/code] 指定的类中的 [code]property[/code] 属性被禁用，"
-"则返回 [code]true[/code]。禁用某一属性后，当选中继承自 "
-"[code]class_name[/code] 类的节点时，该属性将不会出现在检查器中。"
+"则返回 [code]true[/code]。禁用某一属性后，当选中继承自 [code]class_name[/"
+"code] 类的节点时，该属性将不会出现在检查器中。"
 
 #: doc/classes/EditorFeatureProfile.xml
 msgid ""
@@ -25254,9 +25316,8 @@ msgid ""
 "format obtained by using the feature profile manager's [b]Export[/b] button "
 "or the [method save_to_file] method."
 msgstr ""
-"从文件中加载一个编辑器功能配置文件。该文件必须遵循 JSON "
-"格式，通过使用功能配置文件管理器的[b]导出[/b]按钮或 [method save_to_file] "
-"方法获得。"
+"从文件中加载一个编辑器功能配置文件。该文件必须遵循 JSON 格式，通过使用功能配"
+"置文件管理器的[b]导出[/b]按钮或 [method save_to_file] 方法获得。"
 
 #: doc/classes/EditorFeatureProfile.xml
 msgid ""
@@ -25264,9 +25325,8 @@ msgid ""
 "imported using the feature profile manager's [b]Import[/b] button or the "
 "[method load_from_file] method."
 msgstr ""
-"将编辑器的功能配置保存到 JSON "
-"格式的文件中。然后可以使用功能配置文件管理器的[b]导入[/b]按钮或 [method "
-"load_from_file] 方法导入它。"
+"将编辑器的功能配置保存到 JSON 格式的文件中。然后可以使用功能配置文件管理器的"
+"[b]导入[/b]按钮或 [method load_from_file] 方法导入它。"
 
 #: doc/classes/EditorFeatureProfile.xml
 msgid ""
@@ -25274,9 +25334,8 @@ msgid ""
 "by [code]class_name[/code]. When disabled, the class won't appear in the "
 "Create New Node dialog."
 msgstr ""
-"如果 [code]disable[/code] 为 [code]true[/code]，则禁用 "
-"[code]class_name[/code] 指定的类。禁用后，该类不会出现在“创建新 "
-"Node”对话框中。"
+"如果 [code]disable[/code] 为 [code]true[/code]，则禁用 [code]class_name[/"
+"code] 指定的类。禁用后，该类不会出现在“创建新 Node”对话框中。"
 
 #: doc/classes/EditorFeatureProfile.xml
 msgid ""
@@ -25285,9 +25344,9 @@ msgid ""
 "appear in the Create New Node dialog but the inspector will be read-only "
 "when selecting a node that extends the class."
 msgstr ""
-"如果 [code]disable[/code] 为 [code]true[/code]，则禁用 "
-"[code]class_name[/code] 指定的类的编辑。禁用后，该类仍然会出现在“创建新 "
-"Node”对话框中，但在选中继承的节点时，检查器将只读。"
+"如果 [code]disable[/code] 为 [code]true[/code]，则禁用 [code]class_name[/"
+"code] 指定的类的编辑。禁用后，该类仍然会出现在“创建新 Node”对话框中，但在选中"
+"继承的节点时，检查器将只读。"
 
 #: doc/classes/EditorFeatureProfile.xml
 msgid ""
@@ -25296,10 +25355,9 @@ msgid ""
 "When a property is disabled, it won't appear in the inspector when selecting "
 "a node that extends the class specified by [code]class_name[/code]."
 msgstr ""
-"如果 [code]disable[/code] 为 [code]true[/code]，则禁用 "
-"[code]class_name[/code] 指定的类中的 [code]property[/code] "
-"属性的编辑。禁用某一属性后，选中继承自 [code]class_name[/code] "
-"指定的类的节点时，这个属性将不会出现在检查器中。"
+"如果 [code]disable[/code] 为 [code]true[/code]，则禁用 [code]class_name[/"
+"code] 指定的类中的 [code]property[/code] 属性的编辑。禁用某一属性后，选中继承"
+"自 [code]class_name[/code] 指定的类的节点时，这个属性将不会出现在检查器中。"
 
 #: doc/classes/EditorFeatureProfile.xml
 msgid ""
@@ -29688,8 +29746,8 @@ msgid ""
 "HDR values to be suitable for rendering on a SDR display. (Godot doesn't "
 "support rendering on HDR displays yet.)"
 msgstr ""
-"要使用的色调映射模式。色调映射是将 HDR 值“转换”为适合在 SDR "
-"显示器上呈现的值过程。（Godot 尚不支持在 HDR 显示器上进行渲染。）"
+"要使用的色调映射模式。色调映射是将 HDR 值“转换”为适合在 SDR 显示器上呈现的值"
+"过程。（Godot 尚不支持在 HDR 显示器上进行渲染。）"
 
 #: doc/classes/Environment.xml
 msgid ""
@@ -30146,11 +30204,13 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
-"将整个文件作为 [String] 字符串返回。\n"
-"将按照 UTF-8 编码解析文本。"
 
 #: doc/classes/File.xml
 msgid "Returns next [code]len[/code] bytes of the file as a [PoolByteArray]."
@@ -30932,13 +30992,16 @@ msgstr ""
 "另请参阅 [method CanvasItem.draw_string]。"
 
 #: doc/classes/Font.xml
+#, fuzzy
 msgid ""
 "Draw character [code]char[/code] into a canvas item using the font at a "
 "given position, with [code]modulate[/code] color, and optionally kerning if "
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 "使用字体在画布项目的指定位置绘制字符 [code]char[/code]，使用的颜色是 "
 "[code]modulate[/code]，并且会根据宽度做裁剪，如果传入了 [code]next[/code] 还"
@@ -31905,11 +31968,11 @@ msgid ""
 "(hole) produced which could be distinguished by calling [method "
 "is_polygon_clockwise]."
 msgstr ""
-"将[code]polygon_a[/code]与[code]polygon_b[/code]相交并返回相交的多边形数组。"
-"这在多边形之间执行[constant OPERATION_INTERSECTION]。换句话说，返回多边形共享"
-"的公共区域。如果没有发生相交，则返回一个空数组。\n"
-"该操作可能导致产生外部多边形（边界）和内部多边形（孔），可以通过调用[method "
-"is_polygon_clockwise]来区分。"
+"将 [code]polygon_a[/code] 与 [code]polygon_b[/code] 相交并返回相交的多边形数"
+"组。这在多边形之间执行 [constant OPERATION_INTERSECTION]。换句话说，返回多边"
+"形共享的公共区域。如果没有发生相交，则返回一个空数组。\n"
+"该操作可能导致产生外部多边形（边界）和内部多边形（孔），可以通过调用 [method "
+"is_polygon_clockwise] 来区分。"
 
 #: doc/classes/Geometry.xml
 msgid ""
@@ -31968,10 +32031,9 @@ msgid ""
 "[Vector2] that specifies the positions of each tile, [code]size[/code] "
 "contains the overall size of the whole atlas as [Vector2]."
 msgstr ""
-"给定表示图块的 [Vector2] "
-"数组，构建一个地图集。返回的字典有两个键：[code]points[/code] 是 [Vector2] "
-"的数组，用于指定每个图块的位置，[code]size[/code] 包含整个图集的整体大小，"
-"是一个 [Vector2]。"
+"给定表示图块的 [Vector2] 数组，构建一个地图集。返回的字典有两个键："
+"[code]points[/code] 是 [Vector2] 的数组，用于指定每个图块的位置，[code]size[/"
+"code] 包含整个图集的整体大小，是一个 [Vector2]。"
 
 #: doc/classes/Geometry.xml
 msgid ""
@@ -32047,14 +32109,14 @@ msgid ""
 "(hole) produced which could be distinguished by calling [method "
 "is_polygon_clockwise]."
 msgstr ""
-"通过[code]delta[/code]单位（像素）对[code]多边形线polyline[/code]进行充气或放"
-"气，产生多边形。如果[code]delta[/code]为正数，则使多段线向外增长。返回一个多"
-"边形数组，因为充气/放气可能导致多个离散的多边形。如果[code]delta[/code]为负"
-"数，返回一个空数组。\n"
-"每个多边形的顶点将由[code]join_type[/code]决定，见[enum PolyJoinType]。\n"
-"每个多边形的端点将由[code]end_type[/code]决定，见[enum PolyEndType]。\n"
-"该操作可能会产生一个外部多边形（边界）和内部多边形（孔），可以通过调用"
-"[method is_polygon_clockwise]来区分。"
+"对多段线 [code]polyline[/code]进行 [code]delta[/code] 个单位（像素）的充气或"
+"放气，产生多边形。如果 [code]delta[/code] 为正数，则使多段线向外增长。返回一"
+"个多边形数组，因为充气/放气可能导致多个离散的多边形。如果 [code]delta[/code] "
+"为负数，返回一个空数组。\n"
+"每个多边形的顶点将由 [code]join_type[/code] 决定，见 [enum PolyJoinType]。\n"
+"每个多边形的端点将由 [code]end_type[/code] 决定，见 [enum PolyEndType]。\n"
+"该操作可能会产生一个外部多边形（边界）和内部多边形（孔），可以通过调用 "
+"[method is_polygon_clockwise] 来区分。"
 
 #: doc/classes/Geometry.xml
 msgid ""
@@ -32071,9 +32133,9 @@ msgid ""
 "[code]b[/code] and [code]c[/code]. If yes, returns the point of intersection "
 "as [Vector3]. If no intersection takes place, an empty [Variant] is returned."
 msgstr ""
-"测试从[code]from[/code]开始，方向为[code]dir[/code]的3D射线是否与[code]a[/"
-"code]、[code]b[/code]和[code]c[/code]指定的三角形相交。如果是，返回相交点为"
-"[Vector3]。如果没有发生相交，将返回一个空的[Variant]。"
+"测试从 [code]from[/code] 开始，方向为 [code]dir[/code] 的 3D 射线是否与 "
+"[code]a[/code]、[code]b[/code] 和 [code]c[/code] 指定的三角形相交。如果是，返"
+"回相交点为 [Vector3]。如果没有发生相交，将返回一个空的 [Variant]。"
 
 #: doc/classes/Geometry.xml
 msgid ""
@@ -32893,12 +32955,16 @@ msgid ""
 msgstr "颜色插值器资源，可用于在用户定义的颜色点之间生成颜色。"
 
 #: doc/classes/Gradient.xml
+#, fuzzy
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 "给定一组颜色，这个资源将依次两两插值。这意味着，如果你有颜色 1、颜色 2和颜色 "
 "3，渐变将从颜色 1 插值到颜色2、从颜色 2 插值到颜色 3。渐变最初有两种颜色（黑"
@@ -33204,8 +33270,8 @@ msgid ""
 "Makes it not possible to connect between two different slot types. The type "
 "is defined with the [method GraphNode.set_slot] method."
 msgstr ""
-"使得两个不同槽型之间的连接成为不可能。该类型是通过[method GraphNode.set_slot]"
-"方法定义的。"
+"使得两个不同槽型之间的连接成为不可能。该类型是通过 [method GraphNode."
+"set_slot] 方法定义的。"
 
 #: doc/classes/GraphEdit.xml
 msgid ""
@@ -33231,7 +33297,7 @@ msgstr ""
 
 #: doc/classes/GraphEdit.xml
 msgid "Sets the specified [code]node[/code] as the one selected."
-msgstr "选中一个特定的节点 [code]node[/code]."
+msgstr "将指定的 [code]node[/code] 节点设置为选中的节点。"
 
 #: doc/classes/GraphEdit.xml
 msgid "If [code]true[/code], the minimap is visible."
@@ -33251,7 +33317,8 @@ msgstr "小图矩形的大小。地图自身基于网格区域的大小，并被
 msgid ""
 "If [code]true[/code], enables disconnection of existing connections in the "
 "GraphEdit by dragging the right end."
-msgstr "如果为 [code]true[/code]，通过拖动右端，可以断开 GraphEdit 中现有的连接。"
+msgstr ""
+"如果为 [code]true[/code]，通过拖动右端，可以断开 GraphEdit 中现有的连接。"
 
 #: doc/classes/GraphEdit.xml
 msgid "The scroll offset."
@@ -33501,7 +33568,7 @@ msgstr "返回槽[code]idx[/code]的左边（输入）颜色[Color]。"
 
 #: doc/classes/GraphNode.xml
 msgid "Returns the right (output) [Color] of the slot [code]idx[/code]."
-msgstr "返回槽[code]idx[/code]的右边（输出）颜色[Color]。"
+msgstr "返回槽[code]idx[/code]的右边（输出）颜色 [Color]。"
 
 #: doc/classes/GraphNode.xml
 msgid "Returns the left (input) type of the slot [code]idx[/code]."
@@ -33539,17 +33606,17 @@ msgid ""
 "Individual properties can be set using one of the [code]set_slot_*[/code] "
 "methods. You must enable at least one side of the slot to do so."
 msgstr ""
-"设置ID为[code]idx[/code]的插槽的属性。\n"
-"如果[code]enable_left[/code]/[code]right[/code]，就会出现一个端口，该插槽就可"
-"以从这一侧连接。\n"
-"[code]type_left[/code]/[code]right[/code]是端口的一个任意类型。只有具有相同类"
-"型值的端口才能被连接。\n"
-"[code]color_left[/code]/[code]right[/code]是端口在这一侧的图标的色调。\n"
-"[code]custom_left[/code]/[code]right[/code]是这一侧的端口的自定义纹理。\n"
-"[b]注意：[/b]这个方法只设置槽的属性。要创建槽，需要在GraphNode中添加一个"
-"[Control]的派生类。\n"
-"可以使用[code]set_slot_*[/code]方法之一来设置单个属性。你必须至少启用插槽的一"
-"边才能这样做。"
+"设置 ID 为 [code]idx[/code] 的插槽的属性。\n"
+"如果 [code]enable_left[/code]/[code]right[/code]，就会出现一个端口，该插槽就"
+"可以从这一侧连接。\n"
+"[code]type_left[/code]/[code]right[/code] 是端口的一个任意类型。只有具有相同"
+"类型值的端口才能被连接。\n"
+"[code]color_left[/code]/[code]right[/code] 是端口在这一侧的图标的色调。\n"
+"[code]custom_left[/code]/[code]right[/code] 是这一侧的端口的自定义纹理。\n"
+"[b]注意：[/b]这个方法只设置槽的属性。要创建槽，需要在 GraphNode 中添加一个 "
+"[Control] 的派生类。\n"
+"可以使用 [code]set_slot_*[/code] 方法之一来设置单个属性。你必须至少启用插槽的"
+"一边才能这样做。"
 
 #: doc/classes/GraphNode.xml
 msgid ""
@@ -33563,7 +33630,8 @@ msgstr ""
 msgid ""
 "Sets the [Color] of the right (output) side of the slot [code]idx[/code] to "
 "[code]color_right[/code]."
-msgstr "将插槽 [code]idx[/code] 的右侧（输出）的颜色 [Color] 设置为 "
+msgstr ""
+"将插槽 [code]idx[/code] 的右侧（输出）的颜色 [Color] 设置为 "
 "[code]color_right[/code]。"
 
 #: doc/classes/GraphNode.xml
@@ -33622,9 +33690,9 @@ msgid ""
 "[b]Note:[/b] Dragging the handle will only emit the [signal resize_request] "
 "signal, the GraphNode needs to be resized manually."
 msgstr ""
-"如果为 [code]true[/code]，用户可以调整图形节点GraphNode的大小。\n"
-"[b]注意：[/b]拖动手柄只会发出 [signal resize_request] 信号，图形节点GraphNode"
-"需要手动调整大小。"
+"如果为 [code]true[/code]，用户可以调整 GraphNode 的大小。\n"
+"[b]注意：[/b]拖动手柄只会发出 [signal resize_request] 信号，GraphNode 需要手"
+"动调整大小。"
 
 #: doc/classes/GraphNode.xml
 msgid "If [code]true[/code], the GraphNode is selected."
@@ -33637,7 +33705,7 @@ msgid ""
 "the GraphNode needs to be removed manually."
 msgstr ""
 "如果为 [code]true[/code]，则关闭按钮将可见。\n"
-"[b]注意：[/b]按下它只会发出[signal close_request]信号，需要手动删除图形节点"
+"[b]注意：[/b]按下它只会发出 [signal close_request] 信号，需要手动删除 "
 "GraphNode。"
 
 #: doc/classes/GraphNode.xml
@@ -34561,11 +34629,12 @@ msgid "Low-level hyper-text transfer protocol client."
 msgstr "低级别的超文本传输协议客户端。"
 
 #: doc/classes/HTTPClient.xml
+#, fuzzy
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -37088,7 +37157,7 @@ msgstr "下一个顶点的 UV。"
 
 #: doc/classes/ImmediateGeometry.xml
 msgid "The next vertex's second layer UV."
-msgstr "下一个顶点的第二层UV。"
+msgstr "下一个顶点的第二层 UV。"
 
 #: doc/classes/Input.xml
 msgid "A singleton that deals with inputs."
@@ -37163,13 +37232,13 @@ msgid ""
 "measurement for each axis is m/s² while on iOS and UWP it's a multiple of "
 "the Earth's gravitational acceleration [code]g[/code] (~9.81 m/s²)."
 msgstr ""
-"如果设备有加速度传感器，则返回设备的加速度。否则，该方法返回[constant "
+"如果设备有加速度传感器，则返回设备的加速度。否则，该方法返回 [constant "
 "Vector3.ZERO]。\n"
-"请注意，即使你的设备有一个加速度计，当从编辑器运行时，该方法也会返回一个空的"
-"[Vector3]。你必须将项目导出到一个支持的设备上，以便从加速度计上读取数值。\n"
-"[b]注意：[/b]这个方法只在iOS、Android和UWP上工作。在其他平台上，它总是返回"
-"[constant Vector3.ZERO]。在Android上，每个轴的测量单位是m/s²，而在iOS和UWP"
-"上，它是地球重力加速度的倍数[code]g[/code]（~9.81 m/s²）。"
+"请注意，即使你的设备有加速度计，当从编辑器运行时，该方法也会返回空的 "
+"[Vector3]。你必须将项目导出到支持的设备上，才能从加速度计上读到数值。\n"
+"[b]注意：[/b]这个方法只在 iOS、Android 和 UWP 上有效。在其他平台上，它总是返"
+"回 [constant Vector3.ZERO]。在 Android 上，每个轴的测量单位是 m/s²，而在 iOS "
+"和 UWP 上，它是地球重力加速度的倍数 [code]g[/code]（~9.81 m/s²）。"
 
 #: doc/classes/Input.xml
 msgid ""
@@ -37321,9 +37390,9 @@ msgid ""
 "[b]Note:[/b] This method only works on Android, iOS and UWP. On other "
 "platforms, it always returns [constant Vector3.ZERO]."
 msgstr ""
-"如果设备有磁力传感器，则返回设备所有轴的磁场强度，微特斯拉。否则，该方法返回"
-"[constant Vector3.ZERO]。\n"
-"[b]注意：[/b]这个方法只在Android、iOS和UWP上有效。在其他平台上，总是返回"
+"如果设备有磁力传感器，则返回设备所有轴的磁场强度，单位为微特斯拉。否则，该方"
+"法返回 [constant Vector3.ZERO]。\n"
+"[b]注意：[/b]这个方法只在 Android、iOS 和 UWP 上有效。在其他平台上，总是返回 "
 "[constant Vector3.ZERO]。"
 
 #: doc/classes/Input.xml
@@ -37422,7 +37491,7 @@ msgid ""
 "Returns [code]true[/code] if you are pressing the joypad button (see [enum "
 "JoystickList])."
 msgstr ""
-"如果你正在按下手柄按钮，则返回 [code]true[/code]，参阅[enum JoystickList]。"
+"如果你正在按下手柄按钮，则返回 [code]true[/code]（见 [enum JoystickList]）。"
 
 #: doc/classes/Input.xml
 msgid ""
@@ -37641,12 +37710,16 @@ msgid "Stops the vibration of the joypad."
 msgstr "停止游戏手柄的振动。"
 
 #: doc/classes/Input.xml
+#, fuzzy
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 "振动 Android 和 iOS 设备。\n"
 "[b]注意：[/b]Android 需要导出设置中的 [code]VIBRATE[/code] 权限。iOS 不支持持"
@@ -37824,13 +37897,13 @@ msgstr "移动光标。表示那些东西可以移动。"
 msgid ""
 "Vertical split mouse cursor. On Windows, it's the same as [constant "
 "CURSOR_VSIZE]."
-msgstr "垂直拆分鼠标光标。在 Windows 上，它与 [constant CURSOR_VSIZE] 相同。"
+msgstr "垂直拆分鼠标光标。在 Windows 上与 [constant CURSOR_VSIZE] 相同。"
 
 #: doc/classes/Input.xml
 msgid ""
 "Horizontal split mouse cursor. On Windows, it's the same as [constant "
 "CURSOR_HSIZE]."
-msgstr "水平分割的鼠标光标。在 Windows 上，它与 [constant CURSOR_HSIZE] 相同。"
+msgstr "水平分割的鼠标光标。在 Windows 上与 [constant CURSOR_HSIZE] 相同。"
 
 #: doc/classes/Input.xml
 msgid "Help cursor. Usually a question mark."
@@ -38712,8 +38785,12 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
-msgstr "不是线程安全的。如果从线程调用，请使用 [method Object.call_deferred]。"
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
+msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
@@ -38726,6 +38803,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -38892,8 +38979,8 @@ msgid ""
 "Removes all of a [code]hostname[/code]'s cached references. If no "
 "[code]hostname[/code] is given, all cached IP addresses are removed."
 msgstr ""
-"移除所有[code]hostname[/code]主机名的缓存引用。如果没有给出[code]hostname[/"
-"code]，所有缓存的IP地址将被删除。"
+"移除所有 [code]hostname[/code] 主机名的缓存引用。如果没有给出 "
+"[code]hostname[/code]，所有缓存的 IP 地址将被删除。"
 
 #: doc/classes/IP.xml
 msgid ""
@@ -38939,7 +39026,7 @@ msgid ""
 "[method get_resolve_item_status])."
 msgstr ""
 "给定队列 [code]id[/code]，返回排队主机名的 IP 地址。出现错误或解析尚未发生时"
-"返回一个空字符串（参阅 [method get_resolve_item_status]）。"
+"返回一个空字符串（见 [method get_resolve_item_status]）。"
 
 #: doc/classes/IP.xml
 msgid ""
@@ -39460,11 +39547,11 @@ msgstr "指导线的颜色[Color]。指导线是在每行项目之间画的一�
 
 #: doc/classes/ItemList.xml
 msgid "The horizontal spacing between items."
-msgstr "项目菜单之间的水平间距。"
+msgstr "项目之间的水平间距。"
 
 #: doc/classes/ItemList.xml
 msgid "The spacing between item's icon and text."
-msgstr "项目菜单的图标和文本之间的间距。"
+msgstr "项目的图标和文本之间的间距。"
 
 #: doc/classes/ItemList.xml
 msgid "The vertical spacing between each line of text."
@@ -39482,31 +39569,31 @@ msgstr "项目文本的字体 [Font] 。"
 msgid ""
 "Default [StyleBox] for the [ItemList], i.e. used when the control is not "
 "being focused."
-msgstr "[ItemList] 的默认样式盒 [StyleBox]，即在控件未获得焦点时使用。"
+msgstr "该 [ItemList] 的默认样式盒 [StyleBox]，即会在该控件未获得焦点时使用。"
 
 #: doc/classes/ItemList.xml
 msgid "[StyleBox] used when the [ItemList] is being focused."
-msgstr "当 [ItemList] 被聚焦时使用的样式盒 [StyleBox]。"
+msgstr "当该 [ItemList] 获得焦点时所使用的样式盒 [StyleBox]。"
 
 #: doc/classes/ItemList.xml
 msgid "[StyleBox] used for the cursor, when the [ItemList] is being focused."
-msgstr "当 [ItemList] 被聚焦时，用于光标的样式盒 [StyleBox]。"
+msgstr "当该 [ItemList] 获得焦点时，用作光标的样式盒 [StyleBox]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "[StyleBox] used for the cursor, when the [ItemList] is not being focused."
-msgstr "当 [ItemList] 没有被聚焦时，用于光标的样式盒 [StyleBox]。"
+msgstr "当该 [ItemList] 未获得焦点时，用作光标的样式盒 [StyleBox]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "[StyleBox] for the selected items, used when the [ItemList] is not being "
 "focused."
-msgstr "所选项的样式盒 [StyleBox]，当 [ItemList] 没有获得焦点时使用。"
+msgstr "所选项的样式盒 [StyleBox]，当该 [ItemList] 未获得焦点时使用。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "[StyleBox] for the selected items, used when the [ItemList] is being focused."
-msgstr "所选项的样式盒 [StyleBox]，当 [ItemList] 没有获得焦点时使用。"
+msgstr "所选项的样式盒 [StyleBox]，当该 [ItemList] 获得焦点时使用。"
 
 #: doc/classes/JavaScript.xml
 msgid ""
@@ -39538,8 +39625,8 @@ msgid ""
 "JavaScript. The reference must be kept until the callback happens, or it "
 "won't be called at all. See [JavaScriptObject] for usage."
 msgstr ""
-"创建脚本函数的引用，可以被JavaScript用作回调。这个引用必须保持到回调发生为"
-"止，否则它就不会被调用。使用方法参阅[JavaScriptObject]。"
+"创建脚本函数的引用，可以被 JavaScript 用作回调。这个引用必须保持到回调发生为"
+"止，否则它就不会被调用。使用方法见 [JavaScriptObject]。"
 
 #: doc/classes/JavaScript.xml
 msgid ""
@@ -39547,8 +39634,9 @@ msgid ""
 "[code]object[/code] must a valid property of the JavaScript [code]window[/"
 "code]. See [JavaScriptObject] for usage."
 msgstr ""
-"使用[code]new[/code]构造函数创建新的JavaScript对象。[code]object[/code]必须是"
-"JavaScript[code]window[/code]的有效属性。使用方法参阅[JavaScriptObject]。"
+"使用 [code]new[/code] 构造函数创建新的 JavaScript 对象。[code]object[/code] "
+"必须是 JavaScript [code]window[/code] 的有效属性。使用方法见 "
+"[JavaScriptObject]。"
 
 #: doc/classes/JavaScript.xml
 msgid ""
@@ -39563,12 +39651,12 @@ msgid ""
 "[b]Note:[/b] Browsers might ask the user for permission or block the "
 "download if multiple download requests are made in a quick succession."
 msgstr ""
-"提示用户下载一个包含指定[code]buffer[/code]缓冲区的文件。该文件将具有给定的"
-"[code]name[/code]和[code]mime[/code]类型。\n"
-"[b]注意：[/b]浏览器可能会根据文件[code]name[/code]的扩展名，覆盖所提供的"
-"[url=https://en.wikipedia.org/wiki/Media_type]MIME类型[/url]。\n"
-"[b]注意：[/b]如果[method download_buffer]不是由用户交互调用，如点击按钮，浏览"
-"器可能会阻止下载。\n"
+"提示用户下载一个包含指定 [code]buffer[/code] 缓冲区的文件。该文件将具有给定"
+"的 [code]name[/code] 和 [code]mime[/code] 类型。\n"
+"[b]注意：[/b]浏览器可能会根据文件 [code]name[/code] 的扩展名，覆盖所提供的 "
+"[url=https://en.wikipedia.org/wiki/Media_type]MIME 类型[/url]。\n"
+"[b]注意：[/b]如果 [method download_buffer] 不是由用户交互调用，如点击按钮，浏"
+"览器可能会阻止下载。\n"
 "[b]注意：[/b]如果快速连续提出多个下载请求，浏览器可能会要求用户同意或阻止下"
 "载。"
 
@@ -39582,10 +39670,11 @@ msgid ""
 "evaluated in the execution context of a function within the engine's runtime "
 "environment."
 msgstr ""
-"在浏览器窗口中执行字符串[code]code[/code]作为JavaScript代码。这是对实际的全局"
-"JavaScript函数[code]eval()[/code]的调用。\n"
-"如果[code]use_global_execution_context[/code]是[code]true[/code]，代码将在全"
-"局执行环境中被求值。否则，它将在引擎运行时环境中函数的执行上下文中进行求值。"
+"在浏览器窗口中将 [code]code[/code] 字符串作为 JavaScript 代码执行。这是对实际"
+"的全局 JavaScript 函数 [code]eval()[/code] 的调用。\n"
+"如果 [code]use_global_execution_context[/code] 为 [code]true[/code]，代码将在"
+"全局执行环境中被求值。否则，它将在引擎运行时环境中函数的执行上下文中进行求"
+"值。"
 
 #: doc/classes/JavaScript.xml
 msgid ""
@@ -39595,9 +39684,9 @@ msgid ""
 "which will contain the JavaScript [code]arguments[/code]. See "
 "[JavaScriptObject] for usage."
 msgstr ""
-"返回可以被脚本使用的JavaScript对象的接口。这个[code]interface[/code]必须是"
-"JavaScript[code]window[/code]的一个有效属性。回调必须接受一个[Array]参数，它"
-"将包含JavaScript [code]arguments[/code]。参阅[JavaScriptObject]的用法。"
+"返回可以被脚本使用的 JavaScript 对象的接口。这个 [code]interface[/code] 必须"
+"是 JavaScript [code]window[/code] 的一个有效属性。回调必须接受一个 [Array] 参"
+"数，它将包含JavaScript [code]arguments[/code]。用法见 [JavaScriptObject]。"
 
 #: doc/classes/JavaScript.xml
 msgid ""
@@ -39796,7 +39885,8 @@ msgstr ""
 #: doc/classes/Joint2D.xml
 msgid ""
 "If [code]true[/code], [member node_a] and [member node_b] can not collide."
-msgstr "如果为 [code]true[/code]，[member node_a]和[member node_b]不能碰撞。"
+msgstr ""
+"如果为 [code]true[/code]，则 [member node_a] 和 [member node_b] 无法碰撞。"
 
 #: doc/classes/Joint2D.xml
 msgid "The first body attached to the joint. Must derive from [PhysicsBody2D]."
@@ -39805,7 +39895,7 @@ msgstr "连接到关节的第一个实体。必须继承自 [PhysicsBody2D] 。"
 #: doc/classes/Joint2D.xml
 msgid ""
 "The second body attached to the joint. Must derive from [PhysicsBody2D]."
-msgstr "连接到关节的第二实体。必须继承自 [PhysicsBody2D]。"
+msgstr "连接到关节的第二个实体。必须继承自 [PhysicsBody2D]。"
 
 #: doc/classes/JSON.xml
 msgid "Helper class for parsing JSON data."
@@ -40009,10 +40099,10 @@ msgid ""
 "standard on top of [Dictionary]; you will have to convert between a "
 "[Dictionary] and [JSON] with other functions."
 msgstr ""
-"[url=https://www.jsonrpc.org/]JSON-RPC[/url]是一个标准，它将一个方法调用包装"
-"在一个[JSON]对象中。该对象有一个特定的结构，并标识出哪个方法被调用，该函数的"
-"参数，并携带一个ID来跟踪响应。这个类在[Dictionary]之上实现了该标准；你必须用"
-"其他函数在[Dictionary]和[JSON]之间进行转换。"
+"[url=https://www.jsonrpc.org/]JSON-RPC[/url] 是一项标准，它将方法调用包装在一"
+"个 [JSON] 对象中。该对象有一个特定的结构，并标识出哪个方法被调用，该函数的参"
+"数，并携带一个 ID 来跟踪响应。这个类在 [Dictionary] 之上实现了该标准；你必须"
+"用其他函数在 [Dictionary] 和 [JSON] 之间进行转换。"
 
 #: doc/classes/JSONRPC.xml
 msgid ""
@@ -40154,8 +40244,8 @@ msgid ""
 "move_and_slide_with_snap] and when [method is_on_floor] returns [code]true[/"
 "code]."
 msgstr ""
-"返回最后一个碰撞点的地板的表面法线。只有在调用[method move_and_slide]或"
-"[method move_and_slide_with_snap]后，以及[method is_on_floor]返回 "
+"返回最后一个碰撞点的地板的表面法线。只有在调用 [method move_and_slide] 或 "
+"[method move_and_slide_with_snap] 后，以及 [method is_on_floor] 返回 "
 "[code]true[/code] 时才有效。"
 
 #: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
@@ -40326,8 +40416,8 @@ msgid ""
 "[code]lock[/code]. See also [member move_lock_x], [member move_lock_y] and "
 "[member move_lock_z]."
 msgstr ""
-"根据[code]lock[/code]的值，锁定或解锁指定的[code]axis[/code]。参阅[member "
-"move_lock_x]、[member move_lock_y]和[member move_lock_z]。"
+"根据 [code]lock[/code] 的值，锁定或解锁指定的 [code]axis[/code]。另请参阅 "
+"[member move_lock_x]、[member move_lock_y] 和 [member move_lock_z]。"
 
 #: doc/classes/KinematicBody.xml
 msgid ""
@@ -40369,8 +40459,8 @@ msgid ""
 "scale to avoid visible jittering, or for stability with a stack of kinematic "
 "bodies."
 msgstr ""
-"在运动函数中用于碰撞恢复的额外边距，参阅 [method move_and_collide]、[method "
-"move_and_slide]、[method move_and_slide_with_snap]。\n"
+"在运动函数中用于碰撞恢复的额外边距（见 [method move_and_collide]、[method "
+"move_and_slide]、[method move_and_slide_with_snap]）。\n"
 "如果物体离另一个物体至少这么近，它就会认为它们正在发生碰撞，并在执行实际运动"
 "之前被推开。\n"
 "一个较高的值意味着它在检测碰撞时更加灵活，这有助于持续检测墙壁和地板。\n"
@@ -40384,9 +40474,9 @@ msgid ""
 "for example on moving platforms. Do [b]not[/b] use together with [method "
 "move_and_slide] or [method move_and_collide] functions."
 msgstr ""
-"如果为 [code]true[/code]，则物体的运动将与物理帧同步。当通过[AnimationPlayer]"
-"为运动设置动画时，例如在移动平台上，这个功能很有用。请[b]不要[/b]与 [method "
-"move_and_slide] 或 [method move_and_collide] 函数一起使用。"
+"如果为 [code]true[/code]，则物体的运动将与物理帧同步。当通过 "
+"[AnimationPlayer] 为运动设置动画时，例如在移动平台上，这个功能很有用。请[b]不"
+"要[/b]与 [method move_and_slide] 或 [method move_and_collide] 函数一起使用。"
 
 #: doc/classes/KinematicBody.xml
 msgid ""
@@ -40455,14 +40545,14 @@ msgid ""
 "characters that collide against a world, but don't require advanced physics."
 msgstr ""
 "运动体是特殊类型的物体，旨在让用户控制。它们完全不受物理影响；对于其他类型的"
-"物体，如角色或刚体，它们与静态体一样。然而，它们有两个主要用途:\n"
-"[b]模拟运动：[/b]当这些物体被手动移动时，无论是从代码还是从"
-"[AnimationPlayer]，将[member AnimationPlayer.playback_process_mode]设置为 "
-"\"physics\"，物理将自动计算其线性和角速度的估值。这使得它们对于移动平台或其他"
-"AnimationPlayer控制的物体非常有用，比如一扇门、一座能打开的桥等。\n"
-"[b]运动型角色：[/b] KinematicBody2D也有一个API用于移动物体（[method "
-"move_and_collide]和[method move_and_slide]方法），同时进行碰撞测试。这使得它"
-"们在实现对世界进行碰撞，但不需要高级物理的角色时非常有用。"
+"物体，如角色或刚体，它们与静态体一样。然而，它们有两个主要用途：\n"
+"[b]模拟运动：[/b]当这些物体被手动移动时，无论是从代码还是从 "
+"[AnimationPlayer]，将 [member AnimationPlayer.playback_process_mode] 设置"
+"为“physics”，物理将自动计算其线性和角速度的估值。这使得它们对于移动平台或其"
+"他 AnimationPlayer 控制的物体非常有用，比如门、吊桥等。\n"
+"[b]运动学角色：[/b]KinematicBody2D 也有一个 API 用于移动物体（[method "
+"move_and_collide] 和 [method move_and_slide] 方法），同时进行碰撞测试。这使得"
+"它们在实现对世界进行碰撞，但不需要高级物理的角色时非常有用。"
 
 #: doc/classes/KinematicBody2D.xml
 msgid "Using KinematicBody2D"
@@ -41028,8 +41118,8 @@ msgid ""
 "sorted from back to front (subject to priority)."
 msgstr ""
 "设置文本轮廓的渲染优先级。优先级高的物体将被排序在优先级低的物体前面。\n"
-"[b]注意：[/b]仅在 [member alpha_cut] 为 [constant "
-"ALPHA_CUT_DISABLED]（默认值）时适用。\n"
+"[b]注意：[/b]仅在 [member alpha_cut] 为 [constant ALPHA_CUT_DISABLED]（默认"
+"值）时适用。\n"
 "[b]注意：[/b]仅适用于透明物体的排序。这不会影响透明物体相对于不透明物体的排序"
 "方式。这是因为不透明对象不被排序，而透明对象则从后往前排序（取决于优先级）。"
 
@@ -41049,8 +41139,8 @@ msgid ""
 "sorted from back to front (subject to priority)."
 msgstr ""
 "设置文本的渲染优先级。优先级高的物体将被排序在优先级低的物体前面。\n"
-"[b]注意：[/b]仅在 [member alpha_cut] 为 [constant "
-"ALPHA_CUT_DISABLED]（默认值）时适用。\n"
+"[b]注意：[/b]仅在 [member alpha_cut] 为 [constant ALPHA_CUT_DISABLED]（默认"
+"值）时适用。\n"
 "[b]注意：[/b]仅适用于透明物体的排序。这不会影响透明物体相对于不透明物体的排序"
 "方式。这是因为不透明对象不被排序，而透明对象则从后往前排序（取决于优先级）。"
 
@@ -41657,42 +41747,40 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-"在 [code]position[/code] 添加点。将点追加到直线的末尾。\n"
-"如果给定了位置 [code]at_position[/code]，则在位置 [code]at_position[/code] 之"
-"前插入该点，并将该点（以及之后的每个点）移动到插入点之后。如果未给出位置处的 "
-"[code]at_position[/code]，或者是非法值（[code]at_position < 0[/code] 或 "
-"[code]at_position >= [method get_point_count][/code]），则该点将追加到点列表"
-"的末尾。"
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
+msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid "Removes all points from the line."
 msgstr "移除直线上的所有点。"
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr "返回该 Line2D 上点的数量。"
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "返回骨架中的骨骼数量。"
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr "返回点 [code]i[/code] 的位置。"
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "返回索引 [code]point[/code] 处的点的位置。"
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
 msgstr "将索引 [code]i[/code] 处的点从直线中移除。"
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
 msgstr ""
 "用提供的 [code]position[/code] 位置覆盖索引 [code]i[/code] 处点的位置。"
 
@@ -42323,7 +42411,7 @@ msgstr ""
 #: doc/classes/LinkButton.xml
 msgid ""
 "Determines when to show the underline. See [enum UnderlineMode] for options."
-msgstr "决定何时显示下划线。参阅 [enum UnderlineMode] 的选项。"
+msgstr "决定何时显示下划线。可选项见 [enum UnderlineMode]。"
 
 #: doc/classes/LinkButton.xml
 msgid "The LinkButton will always show an underline at the bottom of its text."
@@ -42992,7 +43080,7 @@ msgstr ""
 
 #: doc/classes/MenuButton.xml
 msgid "Emitted when [PopupMenu] of this MenuButton is about to show."
-msgstr "当此 MenuButton 的 [PopupMenu] 即将显示时触发。"
+msgstr "当这个 MenuButton 的 [PopupMenu] 即将显示时触发。"
 
 #: doc/classes/MenuButton.xml
 msgid "Default text [Color] of the [MenuButton]."
@@ -43590,13 +43678,14 @@ msgid "Node that instances meshes into a scenario."
 msgstr "网格实例与场景相结合的节点。"
 
 #: doc/classes/MeshInstance.xml
+#, fuzzy
 msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 "MeshInstance 是一个节点，它获取 [Mesh] 资源并创建一个实例，将其添加到当前场景"
 "中。这是最常被用来渲染 3D 几何体的类，这可以在很多地方使用 [Mesh] 实例，它允"
@@ -43798,8 +43887,8 @@ msgid ""
 "The [Texture] that will be used if using the default [CanvasItemMaterial]. "
 "Can be accessed as [code]TEXTURE[/code] in CanvasItem shader."
 msgstr ""
-"如果使用默认的[CanvasItemMaterial]，就会使用[Texture]。可以在CanvasItem着色器"
-"中作为[code]TEXTURE[/code]访问。"
+"如果使用默认的 [CanvasItemMaterial]，就会使用 [Texture]。可以在 CanvasItem 着"
+"色器中作为 [code]TEXTURE[/code] 访问。"
 
 #: doc/classes/MeshInstance2D.xml doc/classes/MultiMeshInstance2D.xml
 msgid "Emitted when the [member texture] is changed."
@@ -44169,12 +44258,15 @@ msgstr ""
 "set_as_bulk_array] 也可以进行插值。"
 
 #: doc/classes/MultiMesh.xml
+#, fuzzy
 msgid ""
 "Sets the color of a specific instance by [i]multiplying[/i] the mesh's "
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 "通过[i]乘以[/i]网格的现有顶点颜色来设置特定实例的颜色。\n"
 "为了使颜色生效，请确保[MultiMesh]上的[member color_format]不是[code]null[/"
@@ -44435,7 +44527,7 @@ msgid ""
 "[code]id[/code] (see [method NetworkedMultiplayerPeer.set_target_peer]). "
 "Default ID is [code]0[/code], i.e. broadcast to all peers."
 msgstr ""
-"将给定的原始字节 [code]bytes[/code]发送到由 [code]id[/code] 确定的特定对等体"
+"将给定的原始字节 [code]bytes[/code] 发送到由 [code]id[/code] 确定的特定对等体"
 "（见 [method NetworkedMultiplayerPeer.set_target_peer]）。默认 ID 是 "
 "[code]0[/code]，即向所有对等体广播。"
 
@@ -44621,7 +44713,7 @@ msgid ""
 "Behave like [constant RPC_MODE_MASTER] but also make the call or property "
 "change locally. Analogous to the [code]mastersync[/code] keyword."
 msgstr ""
-"类似于 [constant RPC_MODE_MASTER]，但也使方法调用或属性改变本地。类似于 "
+"行为类似于 [constant RPC_MODE_MASTER]，但也使方法调用或属性改变本地。类似于 "
 "[code]mastersync[/code] 关键字。"
 
 #: doc/classes/MultiplayerAPI.xml
@@ -44663,9 +44755,9 @@ msgid ""
 "[b]Note:[/b] This function returns [constant OK] if the thread already has "
 "ownership of the mutex."
 msgstr ""
-"试图锁定此[Mutex]，但并不阻塞。成功时返回[constant OK]，否则返回[constant "
+"试图锁定此 [Mutex]，但并不阻塞。成功时返回 [constant OK]，否则返回 [constant "
 "ERR_BUSY]。\n"
-"[b]注意：[/b]如果线程已经拥有了该Mutex的所有权，该函数返回[constant OK]。"
+"[b]注意：[/b]如果线程已经拥有了该 Mutex 的所有权，该函数返回 [constant OK]。"
 
 #: doc/classes/Mutex.xml
 msgid ""
@@ -44720,7 +44812,7 @@ msgid ""
 msgstr ""
 "构建基础类型的新对象，并附加此类型的脚本。\n"
 "[b]注意：[/b]传递给这个函数的任何参数将被忽略，不会传递给局部构造函数。这将在"
-"未来的API扩展中改变。"
+"未来的 API 扩展中改变。"
 
 #: doc/classes/Navigation.xml
 msgid "Mesh-based navigation and pathfinding node."
@@ -45475,7 +45567,7 @@ msgstr "忽略 Y 轴上的碰撞。在水平面上移动时必须为 [code]true[
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid "The maximum number of neighbors for the agent to consider."
-msgstr "代理所需考虑的最大邻居数。"
+msgstr "该代理所需考虑的最大邻居数。"
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid "The maximum speed that an agent can move."
@@ -45576,9 +45668,10 @@ msgid ""
 msgstr "抵达由 [method set_target_location] 设置的玩家定义目标时发出通知。"
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
+#, fuzzy
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr "调用 [method set_velocity] 后，计算出防撞速度时发出通知。"
 
 #: doc/classes/NavigationAgent2D.xml
@@ -45680,14 +45773,14 @@ msgid ""
 "environment are traversable to aid agents in pathfinding through complicated "
 "spaces."
 msgstr ""
-"导航网格是多边形的集合，用于定义环境中的哪些区域是可遍历的，以帮助代理在复杂"
+"导航网格是多边形的集合，用于定义环境中的哪些区域是可以穿越的，帮助代理在复杂"
 "的空间中寻路。"
 
 #: doc/classes/NavigationMesh.xml doc/classes/NavigationPolygon.xml
 msgid ""
 "Adds a polygon using the indices of the vertices you get when calling "
 "[method get_vertices]."
-msgstr "使用调用[method get_vertices]得到的顶点的索引添加一个多边形。"
+msgstr "使用调用 [method get_vertices] 得到的顶点的索引添加一个多边形。"
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -45711,7 +45804,7 @@ msgstr ""
 msgid ""
 "Returns a [PoolIntArray] containing the indices of the vertices of a created "
 "polygon."
-msgstr "返回包含创建的多边形顶点索引的[PoolIntArray]。"
+msgstr "返回包含创建的多边形顶点索引的 [PoolIntArray]。"
 
 #: doc/classes/NavigationMesh.xml
 msgid "Returns the number of polygons in the navigation mesh."
@@ -45721,7 +45814,7 @@ msgstr "返回导航网格中的多边形数量。"
 msgid ""
 "Returns a [PoolVector3Array] containing all the vertices being used to "
 "create the polygons."
-msgstr "返回包含用于创建多边形的所有顶点的[PoolVector3Array]。"
+msgstr "返回包含用于创建多边形的所有顶点的 [PoolVector3Array]。"
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -45739,7 +45832,7 @@ msgstr ""
 msgid ""
 "Sets the vertices that can be then indexed to create polygons with the "
 "[method add_polygon] method."
-msgstr "设置顶点，然后使用 [method add_polygon] 方法创建多边形。"
+msgstr "设置顶点，可以使用 [method add_polygon] 方法对其进行索引，创建多边形。"
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -45781,7 +45874,7 @@ msgstr "用于字段 Y 轴单元的尺寸。"
 #: doc/classes/NavigationMesh.xml
 msgid ""
 "The sampling distance to use when generating the detail mesh, in cell unit."
-msgstr "生成细分网格时使用的采样距离，以单元为单位。"
+msgstr "生成细分网格时使用的采样距离，以单元格为单位。"
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -45802,7 +45895,7 @@ msgid ""
 "multiple of [member cell_size]."
 msgstr ""
 "沿网格边界的轮廓的最大允许长度。\n"
-"[b]注意：[/b]烘焙时，这个值会向上取整到最接近的[member cell_size]的倍数。"
+"[b]注意：[/b]烘焙时，这个值会向上取整到最接近的 [member cell_size] 的倍数。"
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -45856,7 +45949,7 @@ msgstr ""
 msgid ""
 "The source of the geometry used when baking. See [enum SourceGeometryMode] "
 "for possible values."
-msgstr "烘焙时使用的几何体的源。可能的取值见 [enum SourceGeometryMode]。"
+msgstr "烘焙时使用的几何体的来源。可能的取值见 [enum SourceGeometryMode]。"
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -45865,7 +45958,7 @@ msgid ""
 "SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN] or [constant "
 "SOURCE_GEOMETRY_GROUPS_EXPLICIT]."
 msgstr ""
-"要扫描的几何体组的名称。\n"
+"分组的名称，会在该分组中扫描几何体。\n"
 "只有当 [member geometry_source_geometry_mode] 是 [constant "
 "SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN] 或 [constant "
 "SOURCE_GEOMETRY_GROUPS_EXPLICIT] 时才使用。"
@@ -45884,8 +45977,8 @@ msgid ""
 "For example, a value of 20 will set the number of cells to 400."
 msgstr ""
 "如果可能的话，任何小于这个尺寸的区域将与较大的区域合并。\n"
-"[b]注意：[/b]这个值将被平方来计算单元格的数量。例如，一个20的值将把单元格的数"
-"量设为400。"
+"[b]注意：[/b]这个值将被平方来计算单元格的数量。例如，值为 20 时将把单元格的数"
+"量设为 400。"
 
 #: doc/classes/NavigationMesh.xml
 msgid ""
@@ -46093,13 +46186,13 @@ msgid ""
 "The cost of traveling distances inside this region can be controlled with "
 "the [member travel_cost] multiplier."
 msgstr ""
-"[NavigationMesh] 的实例。[Navigation] 节点根据它的 [NavigationMesh] "
-"资源来确定哪些可以进行导航、哪些不能。\n"
+"[NavigationMesh] 的实例。[Navigation] 节点根据它的 [NavigationMesh] 资源来确"
+"定哪些可以进行导航、哪些不能。\n"
 "默认情况下，这个节点会在默认的 [World] 导航地图中进行注册。如果这个节点是 "
 "[Navigation] 节点的子项，就会在该导航节点的导航地图中进行注册。\n"
 "如果两个地图共享类似的边界，就可以相互连接。你可以通过 [method "
-"NavigationServer.map_set_edge_connection_margin] "
-"设置两个顶点连接两条边界所需的最小距离。\n"
+"NavigationServer.map_set_edge_connection_margin] 设置两个顶点连接两条边界所需"
+"的最小距离。\n"
 "[b]注意：[/b]将两个地区的导航网格相互重叠并不足以将其相连。它们必须共享类似的"
 "边界。\n"
 "从另一个地区进入这个地图的消耗可以通过 [member enter_cost] 进行控制。\n"
@@ -46430,13 +46523,13 @@ msgid ""
 "The pathfinding cost of traveling distances inside this region can be "
 "controlled with the [member travel_cost] multiplier."
 msgstr ""
-"导航地图上的地区。[Navigation2DServer] 根据它的 [NavigationPolygon] "
-"资源来确定哪些可以进行导航、哪些不能。\n"
+"导航地图上的地区。[Navigation2DServer] 根据它的 [NavigationPolygon] 资源来确"
+"定哪些可以进行导航、哪些不能。\n"
 "默认情况下，这个节点会在默认的 [World2D] 导航地图中进行注册。如果这个节点是 "
 "[Navigation2D] 节点的子项，就会在该导航节点的导航地图中进行注册。\n"
 "如果两个地图共享类似的边界，就可以相互连接。你可以通过 [method "
-"Navigation2DServer.map_set_edge_connection_margin] "
-"设置两个顶点连接两条边界所需的最小距离。\n"
+"Navigation2DServer.map_set_edge_connection_margin] 设置两个顶点连接两条边界所"
+"需的最小距离。\n"
 "[b]注意：[/b]将两个地区的导航网格相互重叠并不足以将其相连。它们必须共享类似的"
 "边界。\n"
 "从另一个地区进入这个地图的寻路消耗可以通过 [member enter_cost] 进行控制。\n"
@@ -46610,15 +46703,26 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
-msgstr "使用给定的 [code]peer_id[/code] 初始化该对等体（必须在 1 和 2147483647 "
-"之间）。"
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
+msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
-msgstr "设置连接的状态。见 [enum NetworkedMultiplayerPeer.ConnectionStatus]。"
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
+msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid "Set the max packet size that this peer can handle."
@@ -46632,15 +46736,15 @@ msgid ""
 "it's received)."
 msgstr ""
 "当本地 [MultiplayerAPI] 生成数据包时触发。\n"
-"你的脚本应当获取这个数据包并将其通过网络发送给请求的对等体（"
-"对方收到该数据时应当调用 [method deliver_packet]）。"
+"你的脚本应当获取这个数据包并将其通过网络发送给请求的对等体（对方收到该数据时"
+"应当调用 [method deliver_packet]）。"
 
 #: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
 msgid ""
 "PacketPeer implementation using the [url=http://enet.bespin.org/index."
 "html]ENet[/url] library."
 msgstr ""
-"使用[url=http://enet.bespin.org/index.html]ENet[/url]库实现PacketPeer。"
+"使用 [url=http://enet.bespin.org/index.html]ENet[/url] 库实现 PacketPeer。"
 
 #: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
 msgid ""
@@ -46772,8 +46876,9 @@ msgid ""
 "needs to be in IPv4 or IPv6 address format, for example: "
 "[code]\"192.168.1.1\"[/code]."
 msgstr ""
-"创建服务器时使用的IP。默认情况下，这被设置为通配符[code]\"*\"[/code]，它绑定"
-"到所有可用的接口。IP地址格式为IPv4或IPv6，例如:[code]\"192.168.1.1\"[/code]。"
+"创建服务器时使用的 IP。默认情况下，这被设置为通配符 [code]\"*\"[/code]，它绑"
+"定到所有可用的接口。给定的 IP 地址格式需要是 IPv4 或 IPv6，例如："
+"[code]\"192.168.1.1\"[/code]。"
 
 #: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
 msgid ""
@@ -46932,8 +47037,8 @@ msgid ""
 "requiring the fewest CPU resources. This option may also be used to make "
 "network debugging using tools like Wireshark easier."
 msgstr ""
-"无压缩。这使用最多的带宽，但具有占用最少 CPU 资源的好处。这个选项可以用于"
-"Wireshark等工具使用，更容易进行网络调试。"
+"无压缩。这使用最多的带宽，但具有占用最少 CPU 资源的好处。这个选项可以用于 "
+"Wireshark 等工具使用，更容易进行网络调试。"
 
 #: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
 msgid ""
@@ -46960,13 +47065,13 @@ msgid ""
 "packets smaller than 4 KB. Therefore, it's recommended to use other "
 "compression algorithms in most cases."
 msgstr ""
-"[url=https://www.zlib.net/]Zlib[/url]压缩。与 [constant COMPRESS_FASTLZ] 相"
+"[url=https://www.zlib.net/]Zlib[/url] 压缩。与 [constant COMPRESS_FASTLZ] 相"
 "比，这个选项使用较少的带宽，但代价是使用更多的 CPU 资源。请注意，这种算法对小"
 "于4KB的数据包不是很有效。因此，建议在大多数情况下使用其他压缩算法。"
 
 #: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
 msgid "[url=https://facebook.github.io/zstd/]Zstandard[/url] compression."
-msgstr "[url=https://facebook.github.io/zstd/]Zstandard[/url]压缩。"
+msgstr "[url=https://facebook.github.io/zstd/]Zstandard[/url] 压缩。"
 
 #: doc/classes/NetworkedMultiplayerPeer.xml
 msgid "A high-level network interface to simplify multiplayer interactions."
@@ -47068,8 +47173,8 @@ msgid ""
 "consider whether the order matters."
 msgstr ""
 "数据包不被确认，对丢失的数据包不进行重发尝试。数据包可以以任何顺序到达。可能"
-"比[constant TRANSFER_MODE_UNRELIABLE_ORDERED]快。用于非关键数据，并注意考虑顺"
-"序是否重要。"
+"比 [constant TRANSFER_MODE_UNRELIABLE_ORDERED] 快。用于非关键数据，并注意考虑"
+"顺序是否重要。"
 
 #: doc/classes/NetworkedMultiplayerPeer.xml
 msgid ""
@@ -47080,8 +47185,8 @@ msgid ""
 "example movement and positional data."
 msgstr ""
 "数据包不被确认，对丢失的数据包不进行重发尝试。数据包按其发送顺序接收。有可能"
-"比[constant TRANSFER_MODE_RELIABLE]快。用于非关键数据或由于重发尝试而迟迟不能"
-"收到的数据，例如运动和位置数据。"
+"比 [constant TRANSFER_MODE_RELIABLE] 快。用于非关键数据或由于重发尝试而迟迟不"
+"能收到的数据，例如运动和位置数据。"
 
 #: doc/classes/NetworkedMultiplayerPeer.xml
 msgid ""
@@ -47094,8 +47199,8 @@ msgid ""
 msgstr ""
 "数据包必须被接收，并应进行重发尝试，直到数据包被确认。数据包必须按照其发送的"
 "顺序接收。最可靠的传输模式，但由于开销很大，可能是最慢的。用于必须按顺序传输"
-"和到达的关键数据，例如，正在触发的能力或聊天信息。仔细考虑信息是否真的是关键"
-"的，并尽量少用。"
+"和到达的关键数据，例如触发的能力或聊天信息。仔细考虑信息是否真的是关键的，并"
+"尽量少用。"
 
 #: doc/classes/NetworkedMultiplayerPeer.xml
 msgid "The ongoing connection disconnected."
@@ -47444,8 +47549,8 @@ msgstr ""
 "set_input_as_handled]。\n"
 "对于游戏输入，[method _unhandled_input] 和 [method _unhandled_key_input] 通常"
 "更适合，因为它们允许 GUI 首先拦截事件。\n"
-"[b]注意：[/b]这个方法只有在节点存在于场景树中时才会被调用（也就是说，如果它"
-"非“孤儿”）。"
+"[b]注意：[/b]这个方法只有在节点存在于场景树中时才会被调用（也就是说，如果它不"
+"是“孤儿”）。"
 
 #: doc/classes/Node.xml
 msgid ""
@@ -47508,8 +47613,8 @@ msgid ""
 "call with [method request_ready], which may be called anywhere before adding "
 "the node again."
 msgstr ""
-"当节点“就绪”时被调用。子节点的 [method _ready] 回调会首先被触发，而父节点会在"
-"之后收到就绪通知。\n"
+"当该节点“就绪”时被调用。子节点的 [method _ready] 回调会首先被触发，而父节点会"
+"在之后收到就绪通知。\n"
 "对应于 [method Object._notification] 中的 [constant NOTIFICATION_READY] 通"
 "知。也请参阅变量的 [code]onready[/code] 关键字。\n"
 "通常用于初始化。对于更早的初始化，可以使用 [method Object._init]。也请参阅 "
@@ -47625,10 +47730,10 @@ msgid ""
 "will have a human-readable name based on the name of the node being "
 "instanced instead of its type."
 msgstr ""
-"添加[code]child_node[/code]作为子节点。该子节点在子节点列表中被置于给定的"
-"[code]node[/code]之下。\n"
-"如果[code]legible_unique_name[/code]是[code]true[/code]，子节点将有一个基于被"
-"实例化的节点名称，而不是其类型可读的名称。"
+"将 [code]child_node[/code] 添加为子节点。该子节点在子节点列表中被置于给定的 "
+"[code]node[/code] 之下。\n"
+"如果 [code]legible_unique_name[/code] 为 [code]true[/code]，子节点将有一个基"
+"于被实例化的节点名称，而不是其类型可读的名称。"
 
 #: doc/classes/Node.xml
 msgid ""
@@ -47685,10 +47790,10 @@ msgid ""
 "constructor arguments (i.e. needs to supply arguments to [method Object."
 "_init] method). In that case, the node will be duplicated without a script."
 msgstr ""
-"复制节点，返回一个新的节点。\n"
-"你可以使用[code]flags[/code]来微调这个行为（见[enum DuplicateFlags]）。\n"
-"[b]注意：[/b]如果节点包含一个带有构造参数的脚本（即需要向[method Object."
-"_init]方法提供参数），它将不能正常工作。在这种情况下，节点将被复制而没有脚"
+"复制该节点，返回一个新的节点。\n"
+"你可以使用 [code]flags[/code] 来微调这个行为（见 [enum DuplicateFlags]）。\n"
+"[b]注意：[/b]如果节点包含一个带有构造参数的脚本（即需要向 [method Object."
+"_init] 方法提供参数），它将不能正常工作。在这种情况下，节点将被复制而没有脚"
 "本。"
 
 #: doc/classes/Node.xml
@@ -47746,9 +47851,9 @@ msgid ""
 "method is often used for iterating all children of a node.\n"
 "To access a child node via its name, use [method get_node]."
 msgstr ""
-"按索引返回一个子节点（见[method get_child_count]）。这个方法经常被用于遍历一"
+"按索引返回一个子节点（见 [method get_child_count]）。这个方法经常被用于遍历一"
 "个节点的所有子节点。\n"
-"要通过一个子节点的名字访问它，请使用[method get_node]。"
+"要通过一个子节点的名字访问它，请使用 [method get_node]。"
 
 #: doc/classes/Node.xml
 msgid "Returns the number of child nodes."
@@ -47793,13 +47898,13 @@ msgstr ""
 #: doc/classes/Node.xml
 msgid ""
 "Returns the node's index, i.e. its position among the siblings of its parent."
-msgstr "返回节点的索引，即它在其父节点的兄弟节点中的位置。"
+msgstr "返回该节点的索引，即它在其父节点的兄弟节点中的位置。"
 
 #: doc/classes/Node.xml
 msgid ""
 "Returns the peer ID of the network master for this node. See [method "
 "set_network_master]."
-msgstr "返回此节点的网络主节点的对等 ID。见 [method set_network_master]。"
+msgstr "返回这个节点的网络主节点的对等 ID。见 [method set_network_master]。"
 
 #: doc/classes/Node.xml
 msgid ""
@@ -47990,7 +48095,7 @@ msgstr "如果给定节点是当前节点的直接或间接子节点，则返回
 msgid ""
 "Returns [code]true[/code] if the node is folded (collapsed) in the Scene "
 "dock."
-msgstr "如果节点在场景dock中折叠(collapsed)，则返回 [code]true[/code]。"
+msgstr "如果该节点在场景面板中折叠，则返回 [code]true[/code]。"
 
 #: doc/classes/Node.xml
 msgid ""
@@ -48225,10 +48330,10 @@ msgid ""
 "of it. After using [code]raise[/code], a Control will be drawn on top of its "
 "siblings."
 msgstr ""
-"将此节点移到父节点的子节点层次的底部。这在GUI（[Control]节点）中通常很有用，"
-"因为它们的绘制顺序取决于它们在树中的顺序。最上面的节点首先被绘制出来，然后在"
-"层次结构中最上面的节点下面的所有同级被依次绘制在它的上面。使用[code]raise[/"
-"code]后，一个控件将被绘制在其同级的上面。"
+"将这个节点移到父节点的子节点层次的底部。这在 GUI（[Control]节点）中通常很有"
+"用，因为它们的绘制顺序取决于它们在树中的顺序。最上面的节点首先被绘制出来，然"
+"后在层次结构中最上面的节点下面的所有同级被依次绘制在它的上面。使用 "
+"[code]raise[/code] 后，控件将被绘制在其同级之上。"
 
 #: doc/classes/Node.xml
 msgid ""
@@ -48595,8 +48700,8 @@ msgid ""
 "character, which is reserved for unique names when using [method add_child]. "
 "When setting the name manually, any [code]@[/code] will be removed."
 msgstr ""
-"节点的名称。此名称在兄弟节点（来自同一父节点的其他子节点）中是唯一的。当设置"
-"为现有名称时，节点将自动重命名。\n"
+"该节点的名称。这个名称在兄弟节点（来自同一父节点的其他子节点）中是唯一的。当"
+"设置为现有名称时，节点将自动重命名。\n"
 "[b]注意：[/b]自动生成的名称可能包含 [code]@[/code] 字符，在使用 [method "
 "add_child] 时保留该字符用于唯一名称。手动设置名称时，将删除任何 [code]@[/"
 "code]。"
@@ -48617,9 +48722,10 @@ msgid ""
 "will not be visible in the scene tree, though it will be visible in the "
 "2D/3D view."
 msgstr ""
-"节点的所有者。节点的所有者可以是任何其他节点（需要是父节点或祖父节点等，即场"
-"景树上的祖先）。（通过 [PackedScene]）保存一个节点时，它拥有的所有节点也会随"
-"之保存。这样就可以创建复杂的 [SceneTree]，能够进行实例化与次实例化。\n"
+"该节点的所有者。节点的所有者可以是任何其他节点（需要是沿场景树向上的有效节"
+"点，如父节点、祖父节点等）。（通过 [PackedScene]）保存节点时，它拥有的所有节"
+"点也会随之保存。这样就可以创建复杂的 [SceneTree]，能够进行实例化与次实例"
+"化。\n"
 "[b]注意：[/b]如果想要将子节点持久化进 [PackedScene]，除了调用 [method "
 "add_child] 之外你还必须设置 [member owner]。通常在[url=$DOCS_URL/tutorials/"
 "plugins/running_code_in_the_editor.html]工具脚本[/url]和[url=$DOCS_URL/"
@@ -48650,7 +48756,7 @@ msgid ""
 "process priority value is [i]lower[/i] will have their processing callbacks "
 "executed first."
 msgstr ""
-"节点在已启用的处理回调（即 [constant NOTIFICATION_PROCESS]、[constant "
+"该节点在已启用的处理回调（即 [constant NOTIFICATION_PROCESS]、[constant "
 "NOTIFICATION_PHYSICS_PROCESS] 及其内部对应物）的执行顺序中的优先级。进程优先"
 "级值[i]较低[/i]的节点将首先执行其处理回调。"
 
@@ -50342,8 +50448,8 @@ msgid ""
 msgstr ""
 "为这个 [OmniLight] 使用的阴影渲染模式。见 [enum ShadowMode]。\n"
 "[b]注意：[/b]在 GLES2 中，只有支持深度立方体贴图功能的 GPU 才支持 [constant "
-"SHADOW_CUBE]。Radeon HD 4000 系列等较老的 GPU "
-"不支持立方体贴图阴影，因此会回退到使用双抛物面阴影。"
+"SHADOW_CUBE]。Radeon HD 4000 系列等较老的 GPU 不支持立方体贴图阴影，因此会回"
+"退到使用双抛物面阴影。"
 
 #: doc/classes/OmniLight.xml
 msgid ""
@@ -50358,8 +50464,8 @@ msgid ""
 "SHADOW_DUAL_PARABOLOID], but higher-quality. Only supported on GPUs that "
 "feature support for depth cubemaps."
 msgstr ""
-"阴影被渲染至一个立方体贴图。比 [constant SHADOW_DUAL_PARABOLOID] "
-"慢，但质量更高。仅在支持深度立方体贴图功能的 GPU 上支持。"
+"阴影被渲染至一个立方体贴图。比 [constant SHADOW_DUAL_PARABOLOID] 慢，但质量更"
+"高。仅在支持深度立方体贴图功能的 GPU 上支持。"
 
 #: doc/classes/OmniLight.xml
 msgid "Use more detail vertically when computing the shadow."
@@ -50488,8 +50594,8 @@ msgid ""
 "value of 1 means all the octaves have the same contribution, a value of 0.5 "
 "means each octave contributes half as much as the previous one."
 msgstr ""
-"不同八度音阶的贡献因子。[code]persistence[/code]值为1表示所有的八度有相同的贡"
-"献，值为0.5表示每个八度的贡献是前一个的一半。"
+"不同八度的贡献因子。[code]persistence[/code] 值为 1 表示所有的八度有相同的贡"
+"献，值为 0.5 表示每个八度的贡献是前一个的一半。"
 
 #: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
 msgid ""
@@ -51607,6 +51713,7 @@ msgstr ""
 "[b]注意：[/b]返回 HTML5 和 UWP 上的空字符串，因为此方法尚未在这些平台上实施。"
 
 #: doc/classes/OS.xml
+#, fuzzy
 msgid ""
 "Returns the current UNIX epoch timestamp in seconds.\n"
 "[b]Important:[/b] This is the system clock that the user can manually set. "
@@ -51614,7 +51721,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 "以秒为单位返回当前的 UNIX 纪元时间戳。\n"
 "[b]重要：[/b]这是用户可以手动设置的系统时钟。[b]永远不要使用[/b]这种方法进行"
@@ -51798,12 +51907,12 @@ msgid ""
 "template (debug or release), use [code]OS.has_feature(\"standalone\")[/code] "
 "instead."
 msgstr ""
-"如果用于运行项目的Godot二进制文件是[i]debug[/i]导出，或在编辑器中运行时，返"
-"回 [code]true[/code]。\n"
-"如果用于运行项目的Godot二进制文件是[i]release[/i]导出，则返回 [code]false[/"
-"code]。\n"
-"要检查用于运行项目的Godot二进制文件是否是被导出版本（调试或发布），请使用"
-"[code]OS.has_feature(\"standalone\")[/code]代替。"
+"如果用于运行项目的 Godot 二进制文件是[i]调试[/i]导出模板，或是在编辑器中运行"
+"时，则返回 [code]true[/code]。\n"
+"如果用于运行项目的 Godot 二进制文件是[i]发布[/i]导出模板，则返回 "
+"[code]false[/code]。\n"
+"要检查用于运行项目的 Godot 二进制文件是否为导出模板（调试或发布），请使用 "
+"[code]OS.has_feature(\"standalone\")[/code] 代替。"
 
 #: doc/classes/OS.xml
 msgid ""
@@ -52904,10 +53013,9 @@ msgid ""
 "[constant ERR_OUT_OF_MEMORY]."
 msgstr ""
 "编码 [Variant] 时允许的最大缓冲区大小。提高此值以支持更大的内存分配。\n"
-"[method put_var] 方法在堆栈上分配内存，使用的缓冲区将自动增长到最接近的二次"
-"方，以匹配 [Variant] 的大小。如果 [Variant] 大于 "
-"[code]encode_buffer_max_size[/code]，则该方法将以 [constant "
-"ERR_OUT_OF_MEMORY] 出错。"
+"[method put_var] 方法在栈上分配内存，使用的缓冲区将自动增长到最接近的二次方，"
+"以匹配 [Variant] 的大小。如果 [Variant] 大于 [code]encode_buffer_max_size[/"
+"code]，则该方法将以 [constant ERR_OUT_OF_MEMORY] 出错。"
 
 #: doc/classes/PacketPeerDTLS.xml
 msgid "DTLS packet peer."
@@ -54632,7 +54740,7 @@ msgstr ""
 "返回一个包含运动的安全和不安全比例（0 到 1 之间）的数组。安全比例是在没有碰撞"
 "的情况下可以进行的运动的最大比例。不安全比例是碰撞必须移动的距离的最小部分。"
 "如果没有检测到碰撞，将返回 [code][1.0, 1.0][/code] 的结果。\n"
-"[b]注意：[/b]任何已经碰撞的[Shape2D](比如内部的)会被忽略。使用 [method "
+"[b]注意：[/b]任何已经碰撞的 [Shape2D]（比如内部的）会被忽略。使用 [method "
 "collide_shape] 确定形状已经碰撞的 [Shape2D]。"
 
 #: doc/classes/Physics2DDirectSpaceState.xml
@@ -54667,20 +54775,20 @@ msgid ""
 "[code]rid[/code]: The intersecting object's [RID].\n"
 "[code]shape[/code]: The shape index of the colliding shape."
 msgstr ""
-"通过[Physics2DShapeQueryParameters]对象给出的形状与空间的检查交点。如果它与一"
-"个以上的形状发生碰撞，则选择最近的一个。如果该形状没有与任何对象相交，那么将"
-"返回一个空字典。\n"
-"[b]注意：[/b]这个方法不考虑对象的[code]motion[/code]属性。返回的对象是包含以"
-"下字段的字典。\n"
-"[code]collider_id[/code]:碰撞对象的ID。\n"
-"[code]linear_velocity[/code]:碰撞物体的速度[Vector2]。如果对象是一个"
-"[Area2D]，结果是[code](0, 0)[/code]。\n"
-"[code]metadata[/code]:相交形状的元数据。这个元数据与[method Object.get_meta]"
-"不同，它是用[method Physics2DServer.shape_set_data]设置的。\n"
-"[code]normal[/code]:物体在交点处的表面法线。\n"
-"[code]point[/code]:相交点。\n"
-"[code]rid[/code]:相交物体的[RID]。\n"
-"[code]shape[/code]:碰撞形状的形状索引。"
+"通过 [Physics2DShapeQueryParameters] 对象给出的形状与空间的检查交点。如果它与"
+"一个以上的形状发生碰撞，则选择最近的一个。如果该形状没有与任何对象相交，那么"
+"将返回一个空字典。\n"
+"[b]注意：[/b]这个方法不考虑对象的 [code]motion[/code] 属性。返回的对象是包含"
+"以下字段的字典。\n"
+"[code]collider_id[/code]：碰撞对象的 ID。\n"
+"[code]linear_velocity[/code]：碰撞物体的速度 [Vector2]。如果对象是一个 "
+"[Area2D]，结果是 [code](0, 0)[/code]。\n"
+"[code]metadata[/code]：相交形状的元数据。这个元数据与 [method Object."
+"get_meta] 不同，它是用 [method Physics2DServer.shape_set_data] 设置的。\n"
+"[code]normal[/code]：物体在交点处的表面法线。\n"
+"[code]point[/code]：相交点。\n"
+"[code]rid[/code]：相交物体的 [RID]。\n"
+"[code]shape[/code]：碰撞形状的形状索引。"
 
 #: doc/classes/Physics2DDirectSpaceState.xml
 msgid ""
@@ -55912,7 +56020,7 @@ msgstr ""
 "返回一个包含运动的安全和不安全比例（0 到 1 之间）的数组。安全比例是在没有碰撞"
 "的情况下可以进行的运动的最大比例。不安全比例是碰撞必须移动的距离的最小部分。"
 "如果未检测到碰撞，将返回 [code][1.0, 1.0][/code] 的结果。\n"
-"[b]注意：[/b]任何已经碰撞的[Shape2D](比如内部的)会被忽略。使用 [method "
+"[b]注意：[/b]任何已经碰撞的 [Shape2D]（比如内部的）会被忽略。使用 [method "
 "collide_shape] 确定形状已经碰撞的 [Shape]。"
 
 #: doc/classes/PhysicsDirectSpaceState.xml
@@ -57622,7 +57730,8 @@ msgid ""
 "Returns a [String] with each element of the array joined with the given "
 "[code]delimiter[/code]."
 msgstr ""
-"返回一个[String]，数组的每个元素都用给定的[code]delimiter[/code]分隔符连接。"
+"返回一个 [String]，数组的每个元素都用给定的 [code]delimiter[/code] 分隔符连"
+"接。"
 
 #: doc/classes/PoolStringArray.xml
 msgid "Appends a string element at end of the array."
@@ -58270,7 +58379,10 @@ msgstr ""
 "[b]注意：[/b]被移除项后的项的索引将被移位 1。"
 
 #: doc/classes/PopupMenu.xml
-msgid "Sets the currently focused item as the given [code]index[/code]."
+#, fuzzy
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "将当前聚焦项目设置为给定的索引 [code]index[/code]。"
 
 #: doc/classes/PopupMenu.xml
@@ -58529,10 +58641,13 @@ msgid "Class for displaying popups with a panel background."
 msgstr "用于显示带有面板背景的弹出窗口的类。"
 
 #: doc/classes/PopupPanel.xml
+#, fuzzy
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 "用于显示具有面板背景的弹出窗口的类。在某些情况下，它可能比 [Popup] 更容易使"
 "用，因为它提供了一个可配置的背景。如果你正在制作窗口，最好是查看 "
@@ -59490,10 +59605,12 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
-"如果为 [code]true[/code]，将允许麦克风输入。导出到 Android 或 iOS 时须设置适"
-"当的权限。"
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -59878,7 +59995,7 @@ msgstr ""
 
 #: doc/classes/ProjectSettings.xml
 msgid "Maximum call stack allowed for debugging GDScript."
-msgstr "调试GDScript时允许的最大调用堆栈。"
+msgstr "调试 GDScript 时允许的最大调用堆栈。"
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62805,11 +62922,20 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
-"用于启用各向异性的纹理的最大各向异性过滤器级别。从倾斜角度查看时，较高的值将"
-"导致更清晰的纹理，但会牺牲性能。只有二的指数倍的值是有效（如 2、4、8、16）。"
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -63863,7 +63989,7 @@ msgstr ""
 "pcg-random.org/]PCG32[/url]。\n"
 "[b]注意：[/b]底层算法是实现细节。因此，跨 Godot 版本的可重复随机流不应该依赖"
 "于此。\n"
-"要根据时间相关种子生成随机浮点数，在给定范围内：\n"
+"要根据时间相关种子生成（给定范围内的）随机浮点数：\n"
 "[codeblock]\n"
 "var rng = RandomNumberGenerator.new()\n"
 "func _ready():\n"
@@ -63883,14 +64009,14 @@ msgid ""
 "Generates a pseudo-random float between [code]0.0[/code] and [code]1.0[/"
 "code] (inclusive)."
 msgstr ""
-"生成一个[code]0.0[/code]和[code]1.0[/code]（包括端点）之间的伪随机浮点数。"
+"生成一个 [code]0.0[/code] 和 [code]1.0[/code]（包括端点）之间的伪随机浮点数。"
 
 #: doc/classes/RandomNumberGenerator.xml
 msgid ""
 "Generates a pseudo-random float between [code]from[/code] and [code]to[/"
 "code] (inclusive)."
 msgstr ""
-"生成一个[code]from[/code]和[code]to[/code]（包括端点）之间的伪随机浮点数。"
+"生成一个 [code]from[/code] 和 [code]to[/code]（包括端点）之间的伪随机浮点数。"
 
 #: doc/classes/RandomNumberGenerator.xml
 msgid ""
@@ -64040,14 +64166,14 @@ msgid ""
 "Maximum value. Range is clamped if [code]value[/code] is greater than "
 "[code]max_value[/code]."
 msgstr ""
-"最大值。如果[code]value[/code]大于[code]max_value[/code]，则会被范围限制。"
+"最大值。如果 [code]value[/code] 大于 [code]max_value[/code]，则会被范围限制。"
 
 #: doc/classes/Range.xml
 msgid ""
 "Minimum value. Range is clamped if [code]value[/code] is less than "
 "[code]min_value[/code]."
 msgstr ""
-"最小值。如果[code]value[/code]小于[code]min_value[/code]，则会被范围限制。"
+"最小值。如果 [code]value[/code] 小于 [code]min_value[/code]，则会被范围限制。"
 
 #: doc/classes/Range.xml
 msgid ""
@@ -64593,7 +64719,7 @@ msgstr ""
 
 #: doc/classes/ReferenceRect.xml
 msgid "Reference frame for GUI."
-msgstr "GUI的引用框架。"
+msgstr "GUI 的参考框。"
 
 #: doc/classes/ReferenceRect.xml
 msgid ""
@@ -64607,21 +64733,21 @@ msgstr ""
 
 #: doc/classes/ReferenceRect.xml
 msgid "Sets the border [Color] of the [ReferenceRect]."
-msgstr "设置 [ReferenceRect] 的边框 [Color]。"
+msgstr "设置该 [ReferenceRect] 的边框 [Color]。"
 
 #: doc/classes/ReferenceRect.xml
 msgid ""
 "Sets the border width of the [ReferenceRect]. The border grows both inwards "
 "and outwards with respect to the rectangle box."
-msgstr "设置 [ReferenceRect] 的边框宽度。边界相对于矩形框向内和向外生长。"
+msgstr "设置该 [ReferenceRect] 的边框宽度。边界相对于矩形框同时向内向外伸长。"
 
 #: doc/classes/ReferenceRect.xml
 msgid ""
 "If set to [code]true[/code], the [ReferenceRect] will only be visible while "
 "in editor. Otherwise, [ReferenceRect] will be visible in game."
 msgstr ""
-"如果设置为 [code]true[/code]，[ReferenceRect]将只在编辑器中可见。否则，"
-"[ReferenceRect]将在游戏中可见。"
+"如果设置为 [code]true[/code]，该 [ReferenceRect] 将只在编辑器中可见。否则，"
+"[ReferenceRect] 将在游戏中可见。"
 
 #: doc/classes/ReflectionProbe.xml
 msgid ""
@@ -64729,7 +64855,7 @@ msgstr "定义反射强度。"
 msgid ""
 "Sets the ambient light color to be used when this probe is set to [member "
 "interior_enable]."
-msgstr "设置环境光的颜色，当此探针被设置为[member interior_enable]时使用。"
+msgstr "设置环境光的颜色，当此探针被设置为 [member interior_enable] 时使用。"
 
 #: doc/classes/ReflectionProbe.xml
 msgid ""
@@ -64745,7 +64871,7 @@ msgid ""
 "Sets the energy multiplier for this reflection probe's ambient light "
 "contribution when set to [member interior_enable]."
 msgstr ""
-"当设置为[member interior_enable]时，为该反射探针的环境光贡献设置能量乘数。"
+"当设置为 [member interior_enable] 时，为该反射探针的环境光贡献设置能量乘数。"
 
 #: doc/classes/ReflectionProbe.xml
 msgid ""
@@ -64753,8 +64879,8 @@ msgid ""
 "lighting is then controlled by the [code]interior_ambient_*[/code] "
 "properties."
 msgstr ""
-"如果为 [code]true[/code]，反射将忽略天空的贡献。然后环境照明由"
-"[code]internal_ambient_*[/code]属性控制。"
+"如果为 [code]true[/code]，反射将忽略天空的贡献。然后环境照明由 "
+"[code]internal_ambient_*[/code] 属性控制。"
 
 #: doc/classes/ReflectionProbe.xml
 msgid ""
@@ -64787,7 +64913,7 @@ msgid ""
 "Sets how frequently the [ReflectionProbe] is updated. Can be [constant "
 "UPDATE_ONCE] or [constant UPDATE_ALWAYS]."
 msgstr ""
-"设置 [ReflectionProbe] 的更新频率。可以是 [constant UPDATE_ONCE] 或 "
+"设置该 [ReflectionProbe] 的更新频率。可以是 [constant UPDATE_ONCE] 或 "
 "[constant UPDATE_ALWAYS]。"
 
 #: doc/classes/ReflectionProbe.xml
@@ -65059,9 +65185,9 @@ msgid ""
 "Returns -1 if the group did not match or doesn't exist."
 msgstr ""
 "返回源字符串中匹配的起始位置。捕获组的起始位置可以通过提供它的组号作为一个整"
-"数或它的字符串名称（如果它是一个命名组）来检索。默认值为0，指的是整个表达"
+"数或它的字符串名称（如果它是一个命名组）来检索。默认值为 0，指的是整个表达"
 "式。\n"
-"如果组没有匹配或不存在，返回-1。"
+"如果组没有匹配或不存在，返回 -1。"
 
 #: modules/regex/doc_classes/RegExMatch.xml
 msgid ""
@@ -65072,7 +65198,7 @@ msgid ""
 "Returns an empty string if the group did not match or doesn't exist."
 msgstr ""
 "返回源字符串中匹配的子串。捕获组可以通过提供它的组号作为整数或它的字符串名称"
-"（如果它是一个命名组）来检索。默认值为0，指的是整个表达式。\n"
+"（如果它是一个命名组）来检索。默认值为 0，指的是整个表达式。\n"
 "如果组没有匹配或不存在，则返回一个空字符串。"
 
 #: modules/regex/doc_classes/RegExMatch.xml
@@ -65164,7 +65290,7 @@ msgid ""
 msgstr ""
 "RemoteTransform2D 将自己的 [Transform2D] 推送到场景中另一个 [CanvasItem] 派生"
 "的节点（称为远程节点）。\n"
-"它可以被设置为更新另一个Node的位置、旋转或比例。它可以使用全局坐标或局部坐"
+"它可以被设置为更新另一个 Node 的位置、旋转或比例。它可以使用全局坐标或局部坐"
 "标。"
 
 #: doc/classes/RemoteTransform2D.xml
@@ -65237,12 +65363,13 @@ msgid ""
 msgstr ""
 "复制资源，返回一个复制了导出成员属性的新资源。[b]注意：[/b]为了复制资源，构造"
 "函数被调用，没有参数。当构造函数没有默认值时，这个方法会出错。\n"
-"默认情况下，为了提高效率，子资源在资源副本之间被共享。这可以通过向"
-"[code]subresources[/code]参数传递[code]true[/code]来改变，它将复制子资源。\n"
-"[b]注意：[/b]如果[code]subresources[/code]是[code]true[/code]，这个方法将只执"
-"行一个浅层拷贝。子资源中的嵌套资源不会被复制，仍然会被共享。\n"
-"[b]注意：[/b]当复制一个资源时，只有导出[code]export[/code]的属性被复制。其他"
-"属性将被设置为新资源中的默认值。"
+"默认情况下，为了提高效率，子资源在资源副本之间被共享。这可以通过向 "
+"[code]subresources[/code] 参数传递 [code]true[/code] 来改变，它将复制子资"
+"源。\n"
+"[b]注意：[/b]如果 [code]subresources[/code] 为 [code]true[/code]，这个方法将"
+"只执行一个浅层拷贝。子资源中的嵌套资源不会被复制，仍然会被共享。\n"
+"[b]注意：[/b]当复制一个资源时，只有导出 [code]export[/code] 的属性被复制。其"
+"他属性将被设置为新资源中的默认值。"
 
 #: doc/classes/Resource.xml
 msgid ""
@@ -65480,7 +65607,7 @@ msgid ""
 "Returns the list of extensions available for saving the resource object, "
 "provided it is recognized (see [method recognize])."
 msgstr ""
-"返回可用于保存资源对象的扩展列表，前提是它被识别（见[method recognize]）。"
+"返回可用于保存资源对象的扩展列表，前提是它被识别（见 [method recognize]）。"
 
 #: doc/classes/ResourceFormatSaver.xml
 msgid "Returns whether the given resource object can be saved by this saver."
@@ -65509,7 +65636,7 @@ msgid ""
 "[EditorImportPlugin]."
 msgstr ""
 "这是在核心部分实现的资源导入器的基类。要使用编辑器插件实现你自己的资源导入"
-"器，请参阅[EditorImportPlugin]。"
+"器，见 [EditorImportPlugin]。"
 
 #: doc/classes/ResourceImporter.xml
 msgid "Import plugins"
@@ -65574,11 +65701,11 @@ msgid ""
 "Returns another [enum Error] code if the poll has failed."
 msgstr ""
 "对加载操作进行轮询，即加载一个数据块到下一个阶段。\n"
-"如果轮询成功，但加载操作还没有完成（中间阶段），则返回[constant OK]。这意味着"
-"[method poll]将不得不再次被调用，直到最后阶段完成。\n"
-"如果加载操作已经成功完成，返回[constant ERR_FILE_EOF]。可以通过调用[method "
-"get_resource]获得加载的资源。\n"
-"如果轮询失败，返回另一个[enum Error]错误代码。"
+"如果轮询成功，但加载操作还没有完成（中间阶段），则返回 [constant OK]。这意味"
+"着 [method poll] 将不得不再次被调用，直到最后阶段完成。\n"
+"如果加载操作已经成功完成，返回 [constant ERR_FILE_EOF]。可以通过调用 [method "
+"get_resource] 获得加载的资源。\n"
+"如果轮询失败，返回另一个 [enum Error] 错误代码。"
 
 #: doc/classes/ResourceInteractiveLoader.xml
 msgid ""
@@ -65590,10 +65717,10 @@ msgid ""
 "Returns another [enum Error] code if a poll has failed, aborting the "
 "operation."
 msgstr ""
-"连续地对加载操作进行轮询，直到资源被完全加载或方法[method poll]轮询失败。\n"
-"如果加载操作成功完成，返回[constant ERR_FILE_EOF]。可以通过调用[method "
-"get_resource]获得加载的资源。\n"
-"如果轮询失败，返回另一个[enum Error]错误代码，中止操作。"
+"连续地对加载操作进行轮询，直到资源被完全加载或方法 [method poll] 轮询失败。\n"
+"如果加载操作成功完成，返回 [constant ERR_FILE_EOF]。可以通过调用 [method "
+"get_resource] 获得加载的资源。\n"
+"如果轮询失败，返回另一个 [enum Error] 错误代码，中止操作。"
 
 #: doc/classes/ResourceLoader.xml
 msgid "Singleton used to load resource files."
@@ -65607,7 +65734,7 @@ msgid ""
 "them to a format that can be used by the engine."
 msgstr ""
 "用于从文件系统加载资源文件的单例。\n"
-"它使用在引擎中注册的许多[ResourceFormatLoader]类（无论是内置的还是来自插件"
+"它使用在引擎中注册的许多 [ResourceFormatLoader] 类（无论是内置的还是来自插件"
 "的）来将文件加载到内存中，并将它们转换为引擎可以使用的格式。"
 
 #: doc/classes/ResourceLoader.xml
@@ -65646,10 +65773,10 @@ msgid ""
 "can be overridden by using [method Resource.take_over_path] on a new "
 "resource for that same path."
 msgstr ""
-"返回给定路径[code]path[/code]的缓存资源是否可用。\n"
-"一旦资源被引擎加载，它就会被缓存在内存中，以便更快地访问，未来对[method load]"
-"或[method load_interactive]方法的调用将使用缓存的版本。缓存的资源可以通过对同"
-"一路径的新资源使用[method Resource.take_over_path]来覆盖。"
+"返回给定路径 [code]path[/code] 的缓存资源是否可用。\n"
+"一旦资源被引擎加载，它就会被缓存在内存中，以便更快地访问，未来对 [method "
+"load] 或 [method load_interactive] 方法的调用将使用缓存的版本。缓存的资源可以"
+"通过对同一路径的新资源使用 [method Resource.take_over_path] 来覆盖。"
 
 #: doc/classes/ResourceLoader.xml
 msgid ""
@@ -65671,17 +65798,17 @@ msgid ""
 "be used in most situations, leaving the use of [ResourceLoader] for more "
 "advanced scenarios."
 msgstr ""
-"在给定的路径[code]path[/code]上加载一个资源，缓存结果以便进一步访问。\n"
-"依次查询注册的[ResourceFormatLoader]，找到第一个可以处理该文件扩展名的加载"
-"器，然后尝试加载。如果加载失败，其余的ResourceFormatLoaders也会被尝试。\n"
-"一个可选的[code]type_hint[/code]类型提示可以用来进一步指定"
-"[ResourceFormatLoader]应处理的[Resource]资源类型。任何继承自[Resource]的东西"
-"都可以被用作类型提示，例如图像[Image]。\n"
-"如果[code]no_cache[/code]是[code]true[/code]，资源缓存将被绕过，资源将被重新"
-"加载。否则，如果缓存的资源存在，将被返回。\n"
-"如果没有[ResourceFormatLoader]可以处理该文件，则返回一个空资源。\n"
-"GDScript有一个简化的[method @GDScript.load]内置方法，可以在大多数情况下使用，"
-"把[ResourceLoader]的使用留给更高级的场景。"
+"在给定的路径 [code]path[/code] 上加载一个资源，缓存结果以便进一步访问。\n"
+"依次查询注册的 [ResourceFormatLoader]，找到第一个可以处理该文件扩展名的加载"
+"器，然后尝试加载。如果加载失败，其余的 ResourceFormatLoader 也会被尝试。\n"
+"一个可选的 [code]type_hint[/code] 类型提示可以用来进一步指定 "
+"[ResourceFormatLoader] 应处理的 [Resource] 资源类型。任何继承自 [Resource] 的"
+"东西都可以被用作类型提示，例如 [Image]。\n"
+"如果 [code]no_cache[/code] 是 [code]true[/code]，资源缓存将被绕过，资源将被重"
+"新加载。否则，如果缓存的资源存在，将被返回。\n"
+"如果没有 [ResourceFormatLoader] 可以处理该文件，则返回一个空资源。\n"
+"GDScript 有一个简化的 [method @GDScript.load] 内置方法，可以在大多数情况下使"
+"用，把 [ResourceLoader] 的使用留给更高级的场景。"
 
 #: doc/classes/ResourceLoader.xml
 msgid ""
@@ -65694,11 +65821,11 @@ msgid ""
 "Anything that inherits from [Resource] can be used as a type hint, for "
 "example [Image]."
 msgstr ""
-"开始交互式加载一个资源。返回的[ResourceInteractiveLoader]对象允许以高粒度加"
-"载，连续调用其[method ResourceInteractiveLoader.poll]轮询方法来加载分块。\n"
-"一个可选的[code]type_hint[/code]类型提示可以用来进一步指定应该由"
-"[ResourceFormatLoader]处理的资源[Resource]类型。任何继承自[Resource]的东西都"
-"可以被用作类型提示，例如[Image]。"
+"开始交互式加载一个资源。返回的 [ResourceInteractiveLoader] 对象允许以高粒度加"
+"载，连续调用其 [method ResourceInteractiveLoader.poll] 轮询方法来加载分块。\n"
+"一个可选的 [code]type_hint[/code] 类型提示可以用来进一步指定应该由 "
+"[ResourceFormatLoader] 处理的资源 [Resource] 类型。任何继承自 [Resource] 的东"
+"西都可以被用作类型提示，例如 [Image]。"
 
 #: doc/classes/ResourceLoader.xml
 msgid ""
@@ -65731,9 +65858,9 @@ msgid ""
 "will be renamed to \"[code]name[/code] N\" where N is an incrementing number "
 "starting from 2."
 msgstr ""
-"将一个资源添加到预加载器中，并给出[code]name[/code]。如果给定的[code]name[/"
-"code]的资源已经存在，新的资源将被重命名为\"[code]name[/code] N\"，其中N是一个"
-"从2开始的递增数字。"
+"将一个资源添加到预加载器中，并给出 [code]name[/code]。如果给定的 [code]name[/"
+"code] 的资源已经存在，新的资源将被重命名为 \"[code]name[/code] N\"，其中 N 是"
+"一个从 2 开始的递增数字。"
 
 #: doc/classes/ResourcePreloader.xml
 msgid "Returns the resource associated to [code]name[/code]."
@@ -65748,22 +65875,23 @@ msgid ""
 "Returns [code]true[/code] if the preloader contains a resource associated to "
 "[code]name[/code]."
 msgstr ""
-"如果预加载器包含一个与[code]name[/code]相关的资源，则返回 [code]true[/code]。"
+"如果预加载器包含一个与 [code]name[/code] 相关的资源，则返回 [code]true[/"
+"code]。"
 
 #: doc/classes/ResourcePreloader.xml
 msgid ""
 "Removes the resource associated to [code]name[/code] from the preloader."
-msgstr "从预加载器中删除与[code]name[/code]有关的资源。"
+msgstr "从预加载器中删除与 [code]name[/code] 有关的资源。"
 
 #: doc/classes/ResourcePreloader.xml
 msgid ""
 "Renames a resource inside the preloader from [code]name[/code] to "
 "[code]newname[/code]."
-msgstr "将预加载器中的资源从[code]name[/code]重命名为[code]newname[/code]。"
+msgstr "将预加载器中的资源从 [code]name[/code] 重命名为 [code]newname[/code]。"
 
 #: doc/classes/ResourceSaver.xml
 msgid "Singleton for saving Godot-specific resource types."
-msgstr "用于保存Godot特定资源类型的单例。"
+msgstr "用于保存 Godot 特定资源类型的单例。"
 
 #: doc/classes/ResourceSaver.xml
 msgid ""
@@ -65773,10 +65901,10 @@ msgid ""
 "text-based (e.g. [code].tres[/code] or [code].tscn[/code]) or binary files "
 "(e.g. [code].res[/code] or [code].scn[/code])."
 msgstr ""
-"用于将Godot特定的资源类型保存到文件系统的单例。\n"
-"它使用在引擎中注册的许多[ResourceFormatSaver]类（无论是内置的还是来自插件"
-"的），将引擎特定的资源数据保存到基于文本（如[code].res[/code]或[code].tscn[/"
-"code]）或二进制文件（如[code].res[/code]或[code].scn[/code]）。"
+"用于将 Godot 特定的资源类型保存到文件系统的单例。\n"
+"它使用在引擎中注册的许多 [ResourceFormatSaver] 类（无论是内置的还是来自插件"
+"的），将引擎特定的资源数据保存到基于文本（如 [code].res[/code] 或 [code]."
+"tscn[/code]）或二进制文件（如 [code].res[/code] 或 [code].scn[/code]）。"
 
 #: doc/classes/ResourceSaver.xml
 msgid ""
@@ -65792,9 +65920,9 @@ msgid ""
 "behavior.\n"
 "Returns [constant OK] on success."
 msgstr ""
-"使用识别资源对象的[ResourceFormatSaver]将资源保存到给定路径的磁盘。\n"
+"使用识别资源对象的 [ResourceFormatSaver] 将资源保存到给定路径的磁盘。\n"
 "可以指定 [code]flags[/code] 位掩码来自定义保存行为。\n"
-"成功后返回[constant OK]。"
+"成功后返回 [constant OK]。"
 
 #: doc/classes/ResourceSaver.xml
 msgid "Save the resource with a path relative to the scene which uses it."
@@ -65869,8 +65997,8 @@ msgid ""
 "successfully. If the method returns [code]false[/code], it will skip "
 "transformation to avoid displaying broken text."
 msgstr ""
-"覆盖这个方法来修改[code]char_fx[/code]中的属性。如果字符可以被成功转换，该方"
-"法必须返回 [code]true[/code]。如果该方法返回 [code]false[/code]，它将跳过转"
+"覆盖这个方法来修改 [code]char_fx[/code] 中的属性。如果字符可以被成功转换，该"
+"方法必须返回 [code]true[/code]。如果该方法返回 [code]false[/code]，它将跳过转"
 "换，以避免显示破碎的文本。"
 
 #: doc/classes/RichTextLabel.xml
@@ -65902,9 +66030,9 @@ msgid ""
 "characters instead. This will be resolved in Godot 4.0."
 msgstr ""
 "富文本可以包含自定义文本、字体、图像和一些基本格式。该标签会将这些以内部标签"
-"堆栈的形式进行管理。它还可以适应给定的宽度/高度。\n"
-"[b]注意：[/b]为 [member bbcode_text] 设置内容会清除标签堆栈并根据该属性的内容"
-"重建。对 [member bbcode_text] 所做的任何编辑都将删除先前从其他手动来源（例如 "
+"栈的形式进行管理。它还可以适应给定的宽度/高度。\n"
+"[b]注意：[/b]为 [member bbcode_text] 设置内容会清除标签栈并根据该属性的内容重"
+"建。对 [member bbcode_text] 所做的任何编辑都将删除先前从其他手动来源（例如 "
 "[method append_bbcode] 和 [code]push_*[/code] / [method pop] 方法）所做的编"
 "辑。\n"
 "[b]注意：[/b]RichTextLabel 不支持纠缠的 BBCode 标签。例如，不要使用 [code]"
@@ -65934,7 +66062,7 @@ msgid ""
 "If [code]width[/code] or [code]height[/code] is set to 0, the image size "
 "will be adjusted in order to keep the original aspect ratio."
 msgstr ""
-"将图像的开头和结尾标签添加到标签堆中，可以选择提供 [code]width[/code] 和 "
+"将图像的开头和结尾标签添加到标签栈中，可以选择提供 [code]width[/code] 和 "
 "[code]height[/code] 来调整图像的大小。\n"
 "如果 [code]width[/code] 或 [code]height[/code] 被设置为 0，图像的大小被调整为"
 "保持原始长宽比。"
@@ -65955,7 +66083,7 @@ msgid ""
 "[b]Note:[/b] This method internals' can't possibly fail, but an error code "
 "is returned for backwards compatibility, which will always be [constant OK]."
 msgstr ""
-"解析 [code]bbcode[/code] 并根据需要将标签添加到标签堆栈中。\n"
+"解析 [code]bbcode[/code] 并根据需要将标签添加到标签栈中。\n"
 "[b]注意：[/b]使用此方法，您无法关闭在之前的 [method append_bbcode] 调用中打开"
 "的标签。这样做是为了提高性能，特别是在更新大型 RichTextLabel 时，因为每次重建"
 "整个 BBCode 会更慢。如果您绝对需要在将来的方法调用中关闭标签，请附加 [member "
@@ -65965,7 +66093,7 @@ msgstr ""
 
 #: doc/classes/RichTextLabel.xml
 msgid "Clears the tag stack and sets [member bbcode_text] to an empty string."
-msgstr "清除标记堆栈并将 [member bbcode_text] 设置为空字符串。"
+msgstr "清除标签栈并将 [member bbcode_text] 设置为空字符串。"
 
 #: doc/classes/RichTextLabel.xml
 msgid "Returns the height of the content."
@@ -66000,7 +66128,7 @@ msgstr ""
 
 #: doc/classes/RichTextLabel.xml
 msgid "Adds a newline tag to the tag stack."
-msgstr "在标签堆中添加一个换行标签。"
+msgstr "在标签栈中添加一个换行标签。"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
@@ -66039,40 +66167,40 @@ msgid ""
 "the same as adding a [code][b][/code] tag if not currently in a [code][i][/"
 "code] tag."
 msgstr ""
-"在标签堆中添加一个[code][font][/code]标签，字体为黑体。如果当前没有[code][i]"
-"[/code]标签，这与添加一个[code][b][/code]标签相同。"
+"在标签栈中添加一个 [code][font][/code] 标签，字体为黑体。如果当前没有 [code]"
+"[i][/code] 标签，这与添加一个 [code][b][/code] 标签相同。"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
 "Adds a [code][font][/code] tag with a bold italics font to the tag stack."
-msgstr "在标签堆中添加一个[code][font][/code]标签，字体为粗斜体。"
+msgstr "在标签栈中添加一个 [code][font][/code] 标签，字体为粗斜体。"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
 "Adds a [code][cell][/code] tag to the tag stack. Must be inside a [code]"
 "[table][/code] tag. See [method push_table] for details."
 msgstr ""
-"将一个[code][cell][/code]标签添加到标签堆中。必须在一个[code][table][/code]标"
-"签内。详情见[method push_table]。"
+"在标签栈中添加一个 [code][cell][/code] 标签。必须位于 [code][table][/code] 标"
+"签内。详见 [method push_table]。"
 
 #: doc/classes/RichTextLabel.xml
 msgid "Adds a [code][color][/code] tag to the tag stack."
-msgstr "将一个[code][color][/code]标签添加到标签堆。"
+msgstr "在标签栈中添加一个 [code][color][/code] 标签。"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
 "Adds a [code][font][/code] tag to the tag stack. Overrides default fonts for "
 "its duration."
 msgstr ""
-"将一个[code][font][/code]标签添加到标签堆中。在其有效期内覆盖默认字体。"
+"在标签栈中添加一个 [code][font][/code] 标签。在其有效期内覆盖默认字体。"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
 "Adds an [code][indent][/code] tag to the tag stack. Multiplies [code]level[/"
 "code] by current [member tab_size] to determine new margin length."
 msgstr ""
-"将 [code][indent][/code] 标签添加到标签堆栈。将 [code]level[/code] 乘以当前 "
-"[member tab_size] 以确定新的边距长度。"
+"在标签栈中添加一个 [code][indent][/code] 标签。将 [code]level[/code] 乘以当"
+"前 [member tab_size] 以确定新的边距长度。"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
@@ -66080,8 +66208,8 @@ msgid ""
 "the same as adding a [code][i][/code] tag if not currently in a [code][b][/"
 "code] tag."
 msgstr ""
-"在标签堆中添加一个[code][font][/code]标签，字体为斜体。如果当前没有[code][b]"
-"[/code]标签，这与添加[code][i][/code]标签相同。"
+"在标签栈中添加一个 [code][font][/code] 标签，字体为斜体。如果当前没有 [code]"
+"[b][/code] 标签，这与添加 [code][i][/code] 标签相同。"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
@@ -66089,36 +66217,36 @@ msgid ""
 "[code][ol][/code] or [code][ul][/code], but supports more list types. Not "
 "fully implemented!"
 msgstr ""
-"在标签栈中添加一个[code][list][/code]标签。类似于BBCodes [code][ol][/code] "
-"或 [code][ul][/code] ，但支持更多的列表类型。未完全实现!"
+"在标签栈中添加一个 [code][list][/code] 标签。类似于 BBCode 的 [code][ol][/"
+"code] 或 [code][ul][/code] ，但支持更多的列表类型。未完全实现！"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
 "Adds a [code][meta][/code] tag to the tag stack. Similar to the BBCode [code]"
 "[url=something]{text}[/url][/code], but supports non-[String] metadata types."
 msgstr ""
-"添加一个[code][meta][/code]标签到标签堆中。类似于BBCode [code][url=something]"
-"{text}[/url][/code]，但支持非[String]元数据类型。"
+"在标签栈中添加一个 [code][meta][/code] 标签。类似于BBCode 的 [code]"
+"[url=something]{text}[/url][/code]，但支持非 [String] 元数据类型。"
 
 #: doc/classes/RichTextLabel.xml
 msgid "Adds a [code][font][/code] tag with a monospace font to the tag stack."
-msgstr "在标签堆中添加一个[code][font][/code]标签，该标签为等宽字体。"
+msgstr "在标签栈中添加一个 [code][font][/code] 标签，该标签为等宽字体。"
 
 #: doc/classes/RichTextLabel.xml
 msgid "Adds a [code][font][/code] tag with a normal font to the tag stack."
-msgstr "在标签堆中添加一个具有正常字体的[code][font][/code]标签。"
+msgstr "在标签栈中添加一个具有正常字体的 [code][font][/code] 标签。"
 
 #: doc/classes/RichTextLabel.xml
 msgid "Adds a [code][s][/code] tag to the tag stack."
-msgstr "将一个[code][s][/code]标签添加到标签堆中。"
+msgstr "在标签栈中添加一个 [code][s][/code] 标签。"
 
 #: doc/classes/RichTextLabel.xml
 msgid "Adds a [code][table=columns][/code] tag to the tag stack."
-msgstr "将一个[code][table=columns][/code]标签添加到标签栈。"
+msgstr "在标签栈中添加一个 [code][table=columns][/code] 标签。"
 
 #: doc/classes/RichTextLabel.xml
 msgid "Adds a [code][u][/code] tag to the tag stack."
-msgstr "将一个[code][u][/code]标签添加到标签堆中。"
+msgstr "在标签栈中添加一个 [code][u][/code] 标签。"
 
 #: doc/classes/RichTextLabel.xml
 msgid ""
@@ -66259,7 +66387,7 @@ msgid ""
 "Does not parse BBCodes. Does not modify [member bbcode_text]."
 msgstr ""
 "标签的原始文本。\n"
-"设置后，清除标签堆栈并在其顶部添加一个原始文本标签。不解析 BBCode。不修改 "
+"设置后，清除标签栈并在其顶部添加一个原始文本标签。不解析 BBCode。不修改 "
 "[member bbcode_text]。"
 
 #: doc/classes/RichTextLabel.xml
@@ -66283,7 +66411,7 @@ msgid ""
 msgstr ""
 "当用户点击元标记之间的内容时触发。如果元是在文本中定义的，例如[code]"
 "[url={\"data\"=\"hi\"}]hi[/url][/code]，则该信号的参数为[String]类型。如果需"
-"要特定类型或对象，则必须使用 [method push_meta] 方法将数据手动插入标签堆栈。"
+"要特定类型或对象，则必须使用 [method push_meta] 方法将数据手动插入标签栈。"
 
 #: doc/classes/RichTextLabel.xml
 msgid "Triggers when the mouse exits a meta tag."
@@ -66892,8 +67020,8 @@ msgid ""
 "Rigid body mode. This is the \"natural\" state of a rigid body. It is "
 "affected by forces, and can move, rotate, and be affected by user code."
 msgstr ""
-"刚体模式。这是一个刚体的“自然”状态。它受到力的影响，可以移动、旋转，并受到用"
-"户代码的影响。"
+"刚体模式。这是刚体的“自然”状态。它受到力的影响，可以移动、旋转，并受到用户代"
+"码的影响。"
 
 #: doc/classes/RigidBody.xml
 msgid ""
@@ -67003,7 +67131,7 @@ msgid ""
 "collision (should there be one)."
 msgstr ""
 "如果在给定的向量中移动会导致碰撞，则返回 [code]true[/code]。[code]margin[/"
-"code]增加参与碰撞检测的形状的大小，[code]result[/code] 是一个 "
+"code] 增加参与碰撞检测的形状的大小，[code]result[/code] 是一个 "
 "[Physics2DTestMotionResult] 类型的对象，它包含关于碰撞的额外信息（如果有的"
 "话）。"
 
@@ -67725,8 +67853,8 @@ msgid ""
 msgstr ""
 "在转换过程中，[Room] 内对象的几何形状，或自定义指定的手动绑定，用于生成 [b]凸"
 "多边形绑定[/b]。\n"
-"这个凸多边形在可见性系统中是 [b]必需的[/b]，并且用于许多目的。最重要的是，它"
-"用于决定[Camera]（或物体）是否在[Room]内。凸多边形生成算法很好，但有时它会创"
+"这个凸多边形在可见性系统中是[b]必需的[/b]，并且用于许多目的。最重要的是，它用"
+"于决定 [Camera]（或物体）是否在 [Room] 内。凸多边形生成算法很好，但有时它会创"
 "建太多（或太少）的平面，无法很好地表示空间体积。\n"
 "[code]room_simplify[/code] 值可用于对该过程进行精细控制。它决定了如何相似平面"
 "才能将它们视为相同（并删除重复项）。该值可以设置在 0（无简化）和 1（最大简"
@@ -68138,13 +68266,16 @@ msgstr ""
 "[method change_scene] 调用之后，你无法立即访问到它。"
 
 #: doc/classes/SceneTree.xml
+#, fuzzy
 msgid ""
 "Changes the running scene to a new instance of the given [PackedScene].\n"
 "Returns [constant OK] on success or [constant ERR_CANT_CREATE] if the scene "
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 "将正在运行的场景改变为给定的 [PackedScene] 的新实例。\n"
 "成功时返回 [constant OK]，如果场景不能被实例化，则返回 [constant "
@@ -68331,18 +68462,20 @@ msgstr "当前场景。"
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
-"如果为 [code]true[/code]，以调试为目的从编辑器运行游戏时，碰撞形状将是可见"
-"的。"
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
-"如果为 [code]true[/code]，以调试为目的从编辑器运行游戏时，导航多边形将是可见"
-"的。"
 
 #: doc/classes/SceneTree.xml
 msgid "The root of the edited scene."
@@ -69930,8 +70063,11 @@ msgstr ""
 "[code]color[/code]。确切的绘制方法是每个形状特有的，无法配置。"
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
-msgstr "形状的自定义求解器偏置。"
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
+msgstr ""
 
 #: doc/classes/ShortCut.xml
 msgid "A shortcut for binding input."
@@ -70688,24 +70824,35 @@ msgstr ""
 msgid ""
 "Returns whether this node uses a scale of [code](1, 1, 1)[/code] or its "
 "local transformation scale."
-msgstr "返回该节点是否使用[code](1, 1, 1)[/code]的比例或其本地转换比例。"
+msgstr "返回该节点是否使用 [code](1, 1, 1)[/code] 的比例或其本地变换比例。"
 
 #: doc/classes/Spatial.xml
 msgid ""
 "Returns whether this node is set as Toplevel, that is whether it ignores its "
 "parent nodes transformations."
-msgstr "返回该节点是否被设置为Toplevel，也就是是否忽略其父节点的变换。"
+msgstr "返回该节点是否被设置为顶层（Toplevel），即是否忽略其父节点的变换。"
 
 #: doc/classes/Spatial.xml
 msgid ""
 "Returns whether the node notifies about its global and local transformation "
 "changes. [Spatial] will not propagate this by default."
 msgstr ""
-"返回节点是否通知其全局和局部的变换变化。默认情况下，[Spatial]不会对此进行传"
+"返回节点是否通知其全局和局部的变换变化。默认情况下 [Spatial] 不会对此进行传"
 "播。"
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+"如果该节点位于 [SceneTree] 中，并且其 [member visible] 属性为 [code]true[/"
+"code]，并且其所有上层节点也均可见，则返回 [code]true[/code]。如果任何上层节点"
+"被隐藏，则该节点在场景树中将不可见。"
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -70733,8 +70880,8 @@ msgid ""
 "itself to point toward the [code]target[/code] as per [method look_at]. "
 "Operations take place in global space."
 msgstr ""
-"将节点移动到指定的[code]position[/code]，然后按照[method look_at]的要求旋转自"
-"己以指向[code]target[/code]。操作是在全局空间进行的。"
+"将节点移动到指定的 [code]position[/code]，然后按照 [method look_at] 的要求旋"
+"转自己以指向 [code]target[/code]。操作是在全局空间进行的。"
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -70756,7 +70903,7 @@ msgid ""
 "Rotates the local transformation around axis, a unit [Vector3], by specified "
 "angle in radians. The rotation axis is in object-local coordinate system."
 msgstr ""
-"围绕轴（单位 [Vector3]）旋转本地变换，指定角度（弧度）。旋转轴是在物体的本地"
+"围绕轴（单位 [Vector3]）旋转局部变换，指定角度（弧度）。旋转轴是在物体的本地"
 "坐标系中。"
 
 #: doc/classes/Spatial.xml
@@ -70979,9 +71126,9 @@ msgid ""
 msgstr ""
 "当空间节点的全局变换发生变化时，空间节点会收到这个通知。这意味着当前节点或父"
 "节点改变了它的变换。\n"
-"为了使[constant NOTIFICATION_TRANSFORM_CHANGED]生效，用户首先需要用[method "
-"set_notify_transform]发送请求。如果节点是在编辑器的上下文中，并且它有一个有效"
-"的gizmo，那么该通知也会被发送。"
+"为了使 [constant NOTIFICATION_TRANSFORM_CHANGED] 生效，用户首先需要用 "
+"[method set_notify_transform] 发送请求。如果节点是在编辑器的上下文中，并且它"
+"有一个有效的控制器（Gizmo），那么该通知也会被发送。"
 
 #: doc/classes/Spatial.xml
 msgid ""
@@ -71033,8 +71180,7 @@ msgid ""
 "Returns [code]true[/code], if the specified flag is enabled. See [enum "
 "Flags] enumerator for options."
 msgstr ""
-"如果指定的标志被启用，返回 [code]true[/code]。参阅 [enum Flags] 枚举器的选"
-"项。"
+"如果指定的标志被启用，返回 [code]true[/code]。选项见 [enum Flags] 枚举值。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71063,8 +71209,8 @@ msgid ""
 msgstr ""
 "如果为 [code]true[/code]，则启用指定的标志。标志是可以打开和关闭的可选行为。"
 "使用该函数一次只能启用一个标志，不能将标志枚举值像位掩码一样进行合并，一次启"
-"用或禁用多个标志。也可以通过将相应成员设置为 [code]true[/code] 来启用标志。有"
-"关选项，请参阅 [enum Flags] 枚举器。"
+"用或禁用多个标志。也可以通过将相应成员设置为 [code]true[/code] 来启用标志。选"
+"项见 [enum Flags] 枚举值。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71094,6 +71240,7 @@ msgstr ""
 "纹理，那么这个值会与其 Alpha 通道相乘。"
 
 #: doc/classes/SpatialMaterial.xml
+#, fuzzy
 msgid ""
 "If [code]true[/code], anisotropy is enabled. Anisotropy changes the shape of "
 "the specular blob and aligns it to tangent space. This is useful for brushed "
@@ -71103,7 +71250,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 "如果为 [code]true[/code]，则启用各向异性。各向异性会改变镜面反射斑点的形状并"
 "将其与切线空间对其。可用于拉丝铝材和毛发反射。\n"
@@ -71391,7 +71540,7 @@ msgstr "指定要使用的淡入淡出类型。可以是任何一个 [enum Dista
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The emitted light's color. See [member emission_enabled]."
-msgstr "发出的光的颜色。参阅 [member emission_enabled]。"
+msgstr "发出的光的颜色。见 [member emission_enabled]。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71428,7 +71577,7 @@ msgstr "纹理，指定某点的表面发光的程度。"
 msgid ""
 "Forces a conversion of the [member albedo_texture] from sRGB space to linear "
 "space."
-msgstr "强制将 [member albedo_texture] 从sRGB空间转换为线性空间。"
+msgstr "强制将 [member albedo_texture] 从 sRGB 空间转换为线性空间。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Enables signed distance field rendering shader."
@@ -71464,7 +71613,7 @@ msgid ""
 "If [code]true[/code], transparency is enabled on the body. See also [member "
 "params_blend_mode]."
 msgstr ""
-"如果为 [code]true[/code]，则启用物体的透明度。参阅 [member "
+"如果为 [code]true[/code]，则启用物体的透明度。另请参阅 [member "
 "params_blend_mode]。"
 
 #: doc/classes/SpatialMaterial.xml
@@ -71565,7 +71714,7 @@ msgstr ""
 msgid ""
 "Texture used to specify metallic for an object. This is multiplied by "
 "[member metallic]."
-msgstr "用于指定对象的金属质感。此值乘 [member metallic]。"
+msgstr "用于指定对象的金属质感。这个值会与 [member metallic] 相乘。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71634,9 +71783,9 @@ msgid ""
 "head instead of on the table. See [url=https://github.com/godotengine/godot/"
 "issues/41567]GitHub issue #41567[/url] for details."
 msgstr ""
-"控制对象如何面向摄像机。参阅[enum BillboardMode]。\n"
-"[b]注意：[/b]广告牌模式不适合VR，因为当屏幕贴在你的头部而不是在桌子上时，摄像"
-"机的左右向量不是水平的。参阅[url=https://github.com/godotengine/godot/"
+"控制对象如何面向摄像机。见 [enum BillboardMode]。\n"
+"[b]注意：[/b]广告牌模式不适合 VR，因为当屏幕贴在你的头部而不是在桌子上时，摄"
+"像机的左右向量不是水平的。详见 [url=https://github.com/godotengine/godot/"
 "issues/41567]GitHub issue #41567[/url]。"
 
 #: doc/classes/SpatialMaterial.xml
@@ -71646,7 +71795,7 @@ msgid ""
 "transparent pipeline. See [enum BlendMode]."
 msgstr ""
 "材质的混合模式。\n"
-"[b]注意：[/b]除 [code]Mix[/code] 以外的值会强制对象进入透明管道。参阅 [enum "
+"[b]注意：[/b]除 [code]Mix[/code] 以外的值会强制对象进入透明管道。见 [enum "
 "BlendMode]。"
 
 #: doc/classes/SpatialMaterial.xml
@@ -71673,7 +71822,7 @@ msgid ""
 "If [code]true[/code], enables the vertex grow setting. See [member "
 "params_grow_amount]."
 msgstr ""
-"如果为 [code]true[/code]，启用顶点生长设置。参见[member params_grow_amount]。"
+"如果为 [code]true[/code]，启用顶点生长设置。见 [member params_grow_amount]。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Grows object vertices in the direction of their normals."
@@ -71685,19 +71834,19 @@ msgstr "目前在 Godot 中未实现。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The point size in pixels. See [member flags_use_point_size]."
-msgstr "点的大小，以像素为单位。参见[member flags_use_point_size]。"
+msgstr "点的大小，以像素为单位。见 [member flags_use_point_size]。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The method for rendering the specular blob. See [enum SpecularMode]."
-msgstr "镜面反射斑点的渲染方法。请参阅 [enum SpecularMode]。"
+msgstr "镜面反射斑点的渲染方法。见 [enum SpecularMode]。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
 "If [code]true[/code], the shader will discard all pixels that have an alpha "
 "value less than [member params_alpha_scissor_threshold]."
 msgstr ""
-"如果为 [code]true[/code]，着色器将丢弃所有alpha值小于[member "
-"params_alpha_scissor_threshold]的像素。"
+"如果为 [code]true[/code]，着色器将丢弃所有 Alpha 值小于 [member "
+"params_alpha_scissor_threshold] 的像素。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71705,7 +71854,7 @@ msgid ""
 "when using [constant BILLBOARD_PARTICLES]. See [member "
 "params_billboard_mode]."
 msgstr ""
-"粒子精灵表中的水平帧数。仅在使用 [constant BILLBOARD_PARTICLES] 时启用。参阅"
+"粒子精灵表中的水平帧数。仅在使用 [constant BILLBOARD_PARTICLES] 时启用。见 "
 "[member params_billboard_mode]。"
 
 #: doc/classes/SpatialMaterial.xml
@@ -71714,7 +71863,7 @@ msgid ""
 "using [constant BILLBOARD_PARTICLES]. See [member params_billboard_mode]."
 msgstr ""
 "如果为 [code]true[/code]，循环粒子动画。仅在使用 [constant "
-"BILLBOARD_PARTICLES] 时启用。参阅[member params_billboard_mode]。"
+"BILLBOARD_PARTICLES] 时启用。见 [member params_billboard_mode]。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71722,7 +71871,7 @@ msgid ""
 "when using [constant BILLBOARD_PARTICLES]. See [member "
 "params_billboard_mode]."
 msgstr ""
-"粒子精灵表中的垂直帧数。仅在使用 [constant BILLBOARD_PARTICLES] 时启用。参阅"
+"粒子精灵表中的垂直帧数。仅在使用 [constant BILLBOARD_PARTICLES] 时启用。见 "
 "[member params_billboard_mode]。"
 
 #: doc/classes/SpatialMaterial.xml
@@ -71760,7 +71909,7 @@ msgstr "折射效果的强度。较高的值会使折射的表现更加扭曲。
 msgid ""
 "Texture that controls the strength of the refraction per-pixel. Multiplied "
 "by [member refraction_scale]."
-msgstr "控制每个像素折射强度的纹理。乘以[member refraction_scale]。"
+msgstr "控制每个像素折射强度的纹理。会与 [member refraction_scale] 相乘。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71770,9 +71919,9 @@ msgid ""
 "stored metallic in the red channel, roughness in the blue, and ambient "
 "occlusion in the green you could reduce the number of textures you use."
 msgstr ""
-"指定存储折射信息的[member refraction_texture]的通道。当你在纹理中存储多种效果"
-"的信息时，这很有用。例如，如果你在红色通道中存储金属效果，在蓝色通道中存储粗"
-"糙度，在绿色通道中存储环境遮挡，就可以减少使用纹理的数量。"
+"指定存储折射信息的 [member refraction_texture] 的通道。当你在纹理中存储多种效"
+"果的信息时，这很有用。例如，如果你在红色通道中存储金属效果，在蓝色通道中存储"
+"粗糙度，在绿色通道中存储环境遮挡，就可以减少使用纹理的数量。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Sets the strength of the rim lighting effect."
@@ -71794,7 +71943,7 @@ msgstr ""
 msgid ""
 "Texture used to set the strength of the rim lighting effect per-pixel. "
 "Multiplied by [member rim]."
-msgstr "纹理用于设置每个像素的边缘光照效果的强度。乘以 [member rim]。"
+msgstr "纹理用于设置每个像素的边缘光照效果的强度。会与 [member rim] 相乘。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71818,7 +71967,7 @@ msgstr ""
 msgid ""
 "Texture used to control the roughness per-pixel. Multiplied by [member "
 "roughness]."
-msgstr "用于控制每个像素粗糙度的纹理。乘以 [member roughness]。"
+msgstr "用于控制每个像素粗糙度的纹理。会与 [member roughness] 相乘。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71837,8 +71986,8 @@ msgid ""
 "Texture used to control the subsurface scattering strength. Stored in the "
 "red texture channel. Multiplied by [member subsurf_scatter_strength]."
 msgstr ""
-"用于控制次表面散射强度的纹理。存储在红色纹理通道中。乘以 [member "
-"subsurf_scatter_strength]。"
+"用于控制次表面散射强度的纹理。存储在红色纹理通道中。会与 [member "
+"subsurf_scatter_strength] 相乘。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71854,7 +72003,7 @@ msgstr "如果为 [code]true[/code]，则启用传输效果。"
 msgid ""
 "Texture used to control the transmission effect per-pixel. Added to [member "
 "transmission]."
-msgstr "纹理用于控制每个像素的传输效果。添加到 [member transmission]。"
+msgstr "纹理用于控制每个像素的传输效果。会与 [member transmission] 相加。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71862,7 +72011,7 @@ msgid ""
 "added to [code]UV[/code] in the vertex function. This can be used to offset "
 "a texture."
 msgstr ""
-"[code]UV[/code]坐标的偏移量。这个量将被添加到顶点函数中的 [code]UV[/code] "
+"[code]UV[/code] 坐标的偏移量。这个量将被添加到顶点函数中的 [code]UV[/code] "
 "中。这可以用来偏移纹理。"
 
 #: doc/classes/SpatialMaterial.xml
@@ -71870,7 +72019,7 @@ msgid ""
 "How much to scale the [code]UV[/code] coordinates. This is multiplied by "
 "[code]UV[/code] in the vertex function."
 msgstr ""
-"缩放 [code]UV[/code] 坐标的多少。这个值乘以顶点函数中的 [code]UV[/code]。"
+"[code]UV[/code] 坐标的缩放量。这个值会与顶点函数中的 [code]UV[/code] 相乘。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71912,7 +72061,7 @@ msgid ""
 "How much to scale the [code]UV2[/code] coordinates. This is multiplied by "
 "[code]UV2[/code] in the vertex function."
 msgstr ""
-"缩放 [code]UV[/code] 坐标的多少。这个值乘以顶点函数中的 [code]UV[/code]。"
+"[code]UV2[/code] 坐标的缩放量。这个值会与顶点函数中的 [code]UV2[/code] 相乘。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -71979,7 +72128,7 @@ msgstr "指定每个像素流图方向的纹理，用于 [member anisotropy]。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Texture specifying per-pixel ambient occlusion value."
-msgstr "指定每个像素环境遮挡值的纹理。"
+msgstr "指定每个像素环境光遮蔽的纹理。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Texture specifying per-pixel depth."
@@ -71987,7 +72136,7 @@ msgstr "指定每个像素深度的纹理。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Texture specifying per-pixel subsurface scattering."
-msgstr "指定每个像素的亚表面散射的纹理。"
+msgstr "指定每个像素的次表面散射的纹理。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Texture specifying per-pixel transmission color."
@@ -72097,7 +72246,7 @@ msgstr "不透明和透明的对象都要计算深度绘制。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "No depth draw."
-msgstr "没有深度的绘制。"
+msgstr "不进行深度绘制。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -72107,7 +72256,7 @@ msgstr "对于透明对象，首先对不透明部分进行不透明传递，然
 
 #: doc/classes/SpatialMaterial.xml
 msgid "Default cull mode. The back of the object is culled when not visible."
-msgstr "默认的裁剪模式。当不可见时，对象的背面会被剔除。"
+msgstr "默认的剔除模式。对象的背面会在不可见时被剔除。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The front of the object is culled when not visible."
@@ -72259,11 +72408,11 @@ msgstr "广告牌模式被禁用。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The object's Z axis will always face the camera."
-msgstr "对象的Z轴将始终面向相机。"
+msgstr "对象的 Z 轴将始终面向相机。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid "The object's X axis will always face the camera."
-msgstr "对象的X轴将始终面向相机。"
+msgstr "对象的 X 轴将始终面向相机。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -72319,7 +72468,7 @@ msgid ""
 "faster than [constant DISTANCE_FADE_PIXEL_ALPHA]."
 msgstr ""
 "根据每个像素与相机的距离，使用抖动方法平滑地淡化对象。抖动会根据设定的模式丢"
-"弃像素，在不启用透明的情况下平滑淡化。在某些硬件上，这比 [constant "
+"弃像素，在不启用透明的情况下平滑淡化。在某些硬件上比 [constant "
 "DISTANCE_FADE_PIXEL_ALPHA] 更快。"
 
 #: doc/classes/SpatialMaterial.xml
@@ -72330,8 +72479,8 @@ msgid ""
 "faster than [constant DISTANCE_FADE_PIXEL_ALPHA]."
 msgstr ""
 "根据对象与相机的距离，使用抖动的方法平滑地淡化对象。抖动根据设定的模式丢弃像"
-"素，在不启用透明度的情况下平滑淡化。在某些硬件上，这可能比[constant "
-"DISTANCE_FADE_PIXEL_ALPHA]更快。"
+"素，在不启用透明度的情况下平滑淡化。在某些硬件上可能比 [constant "
+"DISTANCE_FADE_PIXEL_ALPHA] 更快。"
 
 #: doc/classes/SpatialMaterial.xml
 msgid ""
@@ -72826,9 +72975,10 @@ msgstr ""
 "region_rect]。"
 
 #: doc/classes/Sprite3D.xml
+#, fuzzy
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 "要绘制的 [Texture] 对象。如果 [member GeometryInstance.material_override] 被"
 "使用，这将被覆盖。"
@@ -72919,8 +73069,8 @@ msgid ""
 "sorted from back to front (subject to priority)."
 msgstr ""
 "设置该精灵的渲染优先级。优先级高的物体将被排序在优先级低的物体前面。\n"
-"[b]注意：[/b]仅在 [member alpha_cut] 为 [constant "
-"ALPHA_CUT_DISABLED]（默认值）时适用。\n"
+"[b]注意：[/b]仅在 [member alpha_cut] 为 [constant ALPHA_CUT_DISABLED]（默认"
+"值）时适用。\n"
 "[b]注意：[/b]仅适用于透明物体的排序。这不会影响透明物体相对于不透明物体的排序"
 "方式。这是因为不透明对象不被排序，而透明对象则从后往前排序（取决于优先级）。"
 
@@ -73703,7 +73853,7 @@ msgstr ""
 msgid ""
 "Returns a copy of the string with special characters escaped using the C "
 "language standard."
-msgstr "返回一个使用C语言标准转义的特殊字符的字符串的副本。"
+msgstr "返回一个使用 C 语言标准转义的特殊字符的字符串的副本。"
 
 #: doc/classes/String.xml
 msgid ""
@@ -74421,11 +74571,15 @@ msgid "Returns the right side of the string from a given position."
 msgstr "返回该字符串指定位置右侧的内容。"
 
 #: doc/classes/String.xml
+#, fuzzy
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -74510,9 +74664,13 @@ msgid "Returns a simplified canonical path."
 msgstr "返回简化的规范路径。"
 
 #: doc/classes/String.xml
+#, fuzzy
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -74545,11 +74703,15 @@ msgstr ""
 "如果您需要使用更复杂的规则拆分字符串，请改用 [RegEx] 类。"
 
 #: doc/classes/String.xml
+#, fuzzy
 msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 "使用分隔符字符串将字符串拆分为浮点数，并返回子字符串数组。\n"
 "例如，如果被 [code]\",\"[/code] 分割，[code]\"1,2.5,3\"[/code] 将返回 [code]"
@@ -75970,6 +76132,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr "如果启用鼠标右键选择，则返回 [code]true[/code]。"
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "返回索引 [code]tab_idx[/code] 处的选项卡的标题。"
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr "返回向左偏移的隐藏选项卡的数量。"
 
@@ -75999,6 +76166,11 @@ msgid ""
 msgstr "如果为 [code]true[/code]，启用鼠标右键选择选项卡。"
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "为索引 [code]tab_idx[/code] 处的选项卡设置图标。"
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr "为索引 [code]tab_idx[/code] 处的选项卡设置 [code]icon[/code]。"
 
@@ -76012,8 +76184,8 @@ msgid ""
 "dragging tabs between [Tabs]. Enable drag with [member "
 "drag_to_rearrange_enabled]."
 msgstr ""
-"定义重新排列组的ID。为每个[Tabs]选择相同的值，以便在[Tabs]之间拖动标签。用"
-"[member drag_to_rearrange_enabled]启用拖动。"
+"定义重新排列组的 ID。为每个 [Tabs] 选择相同的值，以便在 [Tabs] 之间拖动标签。"
+"用 [member drag_to_rearrange_enabled] 启用拖动。"
 
 #: doc/classes/Tabs.xml
 msgid "Select tab at index [code]tab_idx[/code]."
@@ -76042,12 +76214,14 @@ msgid ""
 "Emitted when the active tab is rearranged via mouse drag. See [member "
 "drag_to_rearrange_enabled]."
 msgstr ""
-"通过鼠标拖动重新排列活动选项卡时发出。参阅 [member "
-"drag_to_rearrange_enabled]。"
+"通过鼠标拖动重新排列活动选项卡时发出。见 [member drag_to_rearrange_enabled]。"
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
-msgstr "当选项卡被右键单击时发出。"
+#, fuzzy
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
+msgstr "按下自定义按钮时发出。见 [method add_button]。"
 
 #: doc/classes/Tabs.xml
 msgid "Emitted when a tab is clicked, even if it is the current tab."
@@ -76473,13 +76647,13 @@ msgid ""
 "    var res_column = result[TextEdit.SEARCH_RESULT_COLUMN]\n"
 "[/codeblock]"
 msgstr ""
-"在文本内部进行搜索。搜索标志可以在[enum SearchFlags]枚举中指定。\n"
-"如果没有找到结果，返回一个空的[code]PoolIntArray[/code]。否则，可以通过[enum "
-"SearchResult]枚举中指定的索引访问结果行和列，例如。\n"
+"在文本内部进行搜索。搜索标志可以用 [enum SearchFlags] 枚举指定。\n"
+"如果没有找到结果，返回一个空的 [code]PoolIntArray[/code]。否则，可以通过 "
+"[enum SearchResult] 枚举中指定的索引访问结果行和列，例如：\n"
 "[codeblock]\n"
 "var result = search(key, flags, line, column)\n"
 "if result.size() > 0:\n"
-"    # 找到的结果。\n"
+"    # 找到结果。\n"
 "    var res_line = result[TextEdit.SEARCH_RESULT_LINE)\n"
 "    var res_column = result[TextEdit.SEARCH_RESULT_COLUMN]\n"
 "[/codeblock]"
@@ -76510,8 +76684,8 @@ msgid ""
 "code]. Deletes the bookmark if [code]bookmark[/code] is [code]false[/code].\n"
 "Bookmarks are shown in the [member breakpoint_gutter]."
 msgstr ""
-"如果 [code]bookmark[/code] 为 [code]true[/code]，则为行 [code]line[/code] "
-"设置书签。如果 [code]bookmark[/code] 为 [code]false[/code]，则删除该书签。\n"
+"如果 [code]bookmark[/code] 为 [code]true[/code]，则为行 [code]line[/code] 设"
+"置书签。如果 [code]bookmark[/code] 为 [code]false[/code]，则删除该书签。\n"
 "书签显示在 [member breakpoint_gutter] 中。"
 
 #: doc/classes/TextEdit.xml
@@ -76944,7 +77118,7 @@ msgid ""
 "Returns an [Image] that is a copy of data from this [Texture]. [Image]s can "
 "be accessed and manipulated directly."
 msgstr ""
-"返回一个 [Image]，它是此 [Texture] 中数据的副本。[Image] 图像可以直接访问和操"
+"返回一个 [Image]，它是这个 [Texture] 中数据的副本。[Image] 可以直接访问和操"
 "作。"
 
 #: doc/classes/Texture.xml
@@ -77290,7 +77464,7 @@ msgstr "返回纹理的高度。高度通常由Y轴表示。"
 #: doc/classes/TextureLayered.xml
 msgid ""
 "Returns an [Image] resource with the data from specified [code]layer[/code]."
-msgstr "返回一个带有指定[code]layer[/code]层数据的[Image]图像资源。"
+msgstr "返回一个带有指定 [code]layer[/code] 层数据的 [Image] 图像资源。"
 
 #: doc/classes/TextureLayered.xml
 msgid ""
@@ -78335,14 +78509,14 @@ msgid ""
 "Returns a [Vector2] array with the positions of all cells containing a tile "
 "from the tileset (i.e. a tile index different from [code]-1[/code])."
 msgstr ""
-"返回一个[Vector2]数组，其中包含图块集中所有单元格的位置（图块索引非[code]-1[/"
-"code]）。"
+"返回一个 [Vector2] 数组，其中包含图块集中所有单元格的位置（图块索引非 "
+"[code]-1[/code]）。"
 
 #: doc/classes/TileMap.xml
 msgid ""
 "Returns an array of all cells with the given tile index specified in "
 "[code]id[/code]."
-msgstr "返回所有具有[code]id[/code]中指定的图块索引的单元格的数组。"
+msgstr "返回所有具有 [code]id[/code] 中指定的图块索引的单元格的数组。"
 
 #: doc/classes/TileMap.xml
 msgid "Returns a rectangle enclosing the used (non-empty) tiles of the map."
@@ -79678,7 +79852,7 @@ msgid ""
 "[b]Note:[/b] This is a \"pass-by\" (not \"bypass\") press mode."
 msgstr ""
 "如果为 [code]true[/code]，只要按下的手指进出按钮，就会发出 [signal pressed] "
-"和[signal released] ]信号，即使压力开始于按钮的有效区域之外。\n"
+"和 [signal released] 信号，即使压力开始于按钮的有效区域之外。\n"
 "[b]注意：[/b]这是一种“pass-by”的按压模式 ，而不是“bypass”。"
 
 #: doc/classes/TouchScreenButton.xml
@@ -81989,21 +82163,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr "使具有相同名称的后续动作合并为一个。"
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
-msgstr "UPNP 网络功能。"
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -82016,7 +82194,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -82045,81 +82223,78 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
-msgstr ""
-"提供 UPNP 功能来发现本地网络上的 [UPNPDevice]，并对它们执行指令，如管理端口映"
-"射（端口转发）和查询本地和远程网络 IP 地址。注意，这个类的方法是同步的，会阻"
-"塞调用线程。\n"
-"要转发一个特定的端口：\n"
-"[codeblock]\n"
-"const PORT = 7777\n"
-"var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
 "[/codeblock]\n"
-"要关闭一个特定的端口（例如，在你使用完它之后）：\n"
-"[codeblock]\n"
-"upnp.delete_port_mapping(port)\n"
-"[/codeblock]\n"
-"[b]注意：[/b]UPnP 发现会阻塞当前线程。要在不阻塞主线程的情况下执行发现，可以"
-"像这样使用 [Thread]：\n"
-"[codeblock]\n"
-"# 当完成 UPnP 端口映射设置时发出（无论成功或失败）。\n"
-"signal upnp_completed(error)\n"
-"\n"
-"# 将其替换为您自己的服务器端口号（介于 1025 和 65535之间）。\n"
-"const SERVER_PORT = 3928\n"
-"var thread = null\n"
-"\n"
-"func _upnp_setup(server_port):\n"
-"    # UPNP 查询需要一些时间。\n"
-"    var upnp = UPNP.new()\n"
-"    var err = upnp.discover()\n"
-"\n"
-"    if err != OK:\n"
-"        push_error(str(err))\n"
-"        emit_signal(\"upnp_completed\", err)\n"
-"        return\n"
-"\n"
-"    if upnp.get_gateway() and upnp.get_gateway().is_valid_gateway():\n"
-"        upnp.add_port_mapping(server_port, server_port, ProjectSettings."
-"get_setting(\"application/config/name\"), \"UDP\")\n"
-"        upnp.add_port_mapping(server_port, server_port, ProjectSettings."
-"get_setting(\"application/config/name\"), \"TCP\")\n"
-"        emit_signal(\"upnp_completed\", OK)\n"
-"\n"
-"func _ready():\n"
-"    thread = Thread.new()\n"
-"    thread.start(self, \"_upnp_setup\", SERVER_PORT)\n"
-"\n"
-"func _exit_tree():\n"
-"    # 当线程正在运行时，在这里等待线程结束来处理游戏退出。\n"
-"    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid "Adds the given [UPNPDevice] to the list of discovered devices."
 msgstr "将给定的 [UPNPDevice] 添加到已发现设备的列表中。"
 
 #: modules/upnp/doc_classes/UPNP.xml
+#, fuzzy
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 "添加一个映射，将默认网关上的外部[code]port[/code]，介于1和65535之间，转发到本"
@@ -82140,12 +82315,15 @@ msgid "Clears the list of discovered devices."
 msgstr "清除已发现设备的列表。"
 
 #: modules/upnp/doc_classes/UPNP.xml
+#, fuzzy
 msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 "如果默认网关上存在给定的端口和协议组合的端口映射（见 [method get_gateway]），"
 "则将其删除。[code]port[/code] 必须是 1 到 65535 之间的有效端口，[code]proto[/"
@@ -82371,16 +82549,17 @@ msgid "Unknown error."
 msgstr "未知错误。"
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
-msgstr "UPNP 设备。"
+msgid "Universal Plug and Play (UPnP) device."
+msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
+#, fuzzy
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 "UPNP 设备。参阅 [UPNP] 了解 UPNP 发现和实用功能。提供对 UPNP 控制命令的低层访"
 "问。允许管理端口映射（端口转发）和查询设备的网络信息，如本地和外部IP地址和状"
@@ -82468,7 +82647,7 @@ msgstr "未知设备。"
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid "Invalid control."
-msgstr "无效控件。"
+msgstr "无效控制。"
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid "Memory allocation error."
@@ -82891,8 +83070,8 @@ msgid ""
 "Returns a vector composed of the [method @GDScript.fposmod] of this vector's "
 "components and [code]modv[/code]'s components."
 msgstr ""
-"返回一个由这个向量的[code]modv[/code]分量和[method @GDScript.fposmod]分量组成"
-"的向量。"
+"返回一个由这个向量的 [code]modv[/code] 分量和 [method @GDScript.fposmod] 分量"
+"组成的向量。"
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid "Returns this vector projected onto the vector [code]b[/code]."
@@ -82958,7 +83137,7 @@ msgstr ""
 msgid ""
 "Returns a perpendicular vector rotated 90 degrees counter-clockwise compared "
 "to the original, with the same length."
-msgstr "返回一个与原来相比逆时针旋转90度的垂直向量，长度不变。"
+msgstr "返回一个与原来相比逆时针旋转 90 度的垂直向量，长度不变。"
 
 #: doc/classes/Vector2.xml doc/classes/Vector3.xml
 msgid ""
@@ -83320,8 +83499,9 @@ msgid ""
 "skidding. 0.0 is skidding (the wheel has lost grip, e.g. icy terrain), 1.0 "
 "means not skidding (the wheel has full grip, e.g. dry asphalt road)."
 msgstr ""
-"返回一个介于0.0和1.0之间的值，表示这个轮子是否打滑。0.0表示打滑，即车轮失去了"
-"抓地力，例如冰雪地形，1.0表示不打滑，即车轮有充分的抓地力，例如干燥的沥青路。"
+"返回一个介于 0.0 和 1.0 之间的值，表示这个轮子是否打滑。0.0 表示打滑（车轮失"
+"去了抓地力，例如冰雪地形），1.0 表示不打滑（车轮有充分的抓地力，例如干燥的沥"
+"青路）。"
 
 #: doc/classes/VehicleWheel.xml
 msgid "Returns [code]true[/code] if this wheel is in contact with a surface."
@@ -84069,10 +84249,10 @@ msgid ""
 "Viewport or from [code]SCREEN_TEXTURE[/code] becomes unavailable. For more "
 "information see [method VisualServer.viewport_set_render_direct_to_screen]."
 msgstr ""
-"如果为 [code]true[/code]，会直接将 Viewport 渲染到屏幕上，而不是渲染到根视窗"
-"上。只在 GLES2 中可用。这是一个低级别的优化，在大多数情况下不应该使用。如果使"
-"用，从 Viewport 或从 [code]SCREEN_TEXTURE[/code] 读取将变得不可用。更多信息参"
-"阅 [method VisualServer.viewport_set_render_direct_to_screen]。"
+"如果为 [code]true[/code]，会直接将该 Viewport 渲染到屏幕上，而不是渲染到根视"
+"窗上。只在 GLES2 中可用。这是一个低级别的优化，在大多数情况下不应该使用。如果"
+"使用，从该 Viewport 或从 [code]SCREEN_TEXTURE[/code] 读取将变得不可用。更多信"
+"息参阅 [method VisualServer.viewport_set_render_direct_to_screen]。"
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -84133,17 +84313,17 @@ msgid ""
 "Values around [code]0.5[/code] generally give the best results. See also "
 "[member fxaa]."
 msgstr ""
-"如果设置为大于[code]0.0[/code]的值，对比度适应性锐化将被应用到3D视窗中。这具"
-"有较低的性能成本，可以用来恢复使用FXAA所损失的一些锐度。一般来说，[code]0.5[/"
-"code]左右的数值可以得到最好的效果。参阅[member fxaa]。"
+"如果设置为大于 [code]0.0[/code] 的值，对比度适应性锐化将被应用到3D视窗中。这"
+"具有较低的性能成本，可以用来恢复使用 FXAA 所损失的一些锐度。一般来说，"
+"[code]0.5[/code] 左右的数值可以得到最好的效果。另请参阅 [member fxaa]。"
 
 #: doc/classes/Viewport.xml
 msgid ""
 "The width and height of viewport. Must be set to a value greater than or "
 "equal to 2 pixels on both dimensions. Otherwise, nothing will be displayed."
 msgstr ""
-"视窗的宽度和高度。必须在两个维度上设置为大于或等于2像素的值。否则，将不会显示"
-"任何东西。"
+"视窗的宽度和高度。必须在两个维度上设置为大于或等于 2 像素的值。否则，将不会显"
+"示任何东西。"
 
 #: doc/classes/Viewport.xml
 msgid "If [code]true[/code], the size override affects stretch as well."
@@ -84201,7 +84381,7 @@ msgid ""
 "Emitted when the size of the viewport is changed, whether by [method "
 "set_size_override], resize of window, or some other means."
 msgstr ""
-"当视窗的大小被改变时，无论是通过[method set_size_override]，调整窗口的大小，"
+"当视窗的大小被改变时，无论是通过 [method set_size_override]、调整窗口的大小，"
 "还是其他方式，都会触发。"
 
 #: doc/classes/Viewport.xml
@@ -84236,11 +84416,11 @@ msgstr "此象限将分为 4 个，最多使用 4 个阴影贴图。"
 
 #: doc/classes/Viewport.xml
 msgid "This quadrant will be split 16 ways and used by up to 16 shadow maps."
-msgstr "此象限将被分成16个方向，并被最多16张阴影贴图使用。"
+msgstr "此象限将被分成 16 个方向，并被最多 16 张阴影贴图使用。"
 
 #: doc/classes/Viewport.xml
 msgid "This quadrant will be split 64 ways and used by up to 64 shadow maps."
-msgstr "这个象限将被分成64个方向，并被最多64张阴影贴图使用。"
+msgstr "这个象限将被分成 64 个方向，并被最多 64 张阴影贴图使用。"
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -84248,7 +84428,7 @@ msgid ""
 "Unless the [member shadow_atlas_size] is very high, the shadows in this "
 "quadrant will be very low resolution."
 msgstr ""
-"这个象限将被分成256个方向，并被最多256个阴影贴图使用。除非 [member "
+"这个象限将被分成 256 个方向，并被最多 256 个阴影贴图使用。除非 [member "
 "shadow_atlas_size] 非常高，否则这个象限内的阴影分辨率会非常低。"
 
 #: doc/classes/Viewport.xml
@@ -84257,12 +84437,12 @@ msgid ""
 "Unless the [member shadow_atlas_size] is very high, the shadows in this "
 "quadrant will be very low resolution."
 msgstr ""
-"这个象限将被分成1024个方向，并被最多1024个阴影贴图使用。除非 [member "
+"这个象限将被分成 1024 个方向，并被最多 1024 个阴影贴图使用。除非 [member "
 "shadow_atlas_size] 非常高，否则这个象限内的阴影分辨率会非常低。"
 
 #: doc/classes/Viewport.xml
 msgid "Represents the size of the [enum ShadowAtlasQuadrantSubdiv] enum."
-msgstr "代表[enum ShadowAtlasQuadrantSubdiv]枚举的大小。"
+msgstr "代表 [enum ShadowAtlasQuadrantSubdiv] 枚举的大小。"
 
 #: doc/classes/Viewport.xml
 msgid "Amount of objects in frame."
@@ -84882,7 +85062,7 @@ msgstr "返回给定函数的屏幕中心的位置。"
 
 #: modules/visual_script/doc_classes/VisualScript.xml
 msgid "Returns a node given its id and its function."
-msgstr "返回一个节点，指定它的id和它的函数。"
+msgstr "返回一个节点，指定它的 id 和它的函数。"
 
 #: modules/visual_script/doc_classes/VisualScript.xml
 msgid "Returns a node's position in pixels."
@@ -85175,7 +85355,7 @@ msgid ""
 "Return a number linearly interpolated between the first two inputs, based on "
 "the third input. Uses the formula [code]a + (a - b) * t[/code]."
 msgstr ""
-"返回一个在前两个输入之间线性插值的数字，以第三个输入为基础。使用公式[code]a "
+"返回一个在前两个输入之间线性插值的数字，以第三个输入为基础。使用公式 [code]a "
 "+ (a - b) * t[/code]。"
 
 #: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
@@ -85203,16 +85383,16 @@ msgid ""
 "N (where N is smaller than 2^32 - 1), you can use it with the remainder "
 "function."
 msgstr ""
-"返回一个随机的32位整数值。为了获得0到N之间的随机值（其中N小于2^32 - 1），你可"
-"以将其与余数函数一起使用。"
+"返回一个随机的 32 位整数值。为了获得 0 到 N 之间的随机值（其中 N 小于 2^32 - "
+"1），你可以将其与余数函数一起使用。"
 
 #: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
 msgid ""
 "Return a random floating-point value between 0 and 1. To obtain a random "
 "value between 0 to N, you can use it with multiplication."
 msgstr ""
-"返回一个介于0 到 1之间的随机浮点值。要获得一个介于0到N之间的随机值，可以将其"
-"与乘法结合使用。"
+"返回一个介于 0 到 1 之间的随机浮点值。要获得一个介于 0 到 N 之间的随机值，可"
+"以将其与乘法结合使用。"
 
 #: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
 msgid "Return a random floating-point value between the two inputs."
@@ -85347,7 +85527,7 @@ msgid ""
 "[/codeblock]"
 msgstr ""
 "返回一个在前两个输入之间平滑内插的数字，基于第三个输入。类似于 [constant "
-"MATH_LERP]，但在开始时插值较快，结束时插值较慢。使用Hermite插值公式。\n"
+"MATH_LERP]，但在开始时插值较快，结束时插值较慢。使用 Hermite 插值公式。\n"
 "[codeblock]\n"
 "var t = clamp((weight - from) / (to - from), 0.0, 1.0)\n"
 "return t * t * (3.0 - 2.0 * t)\n"
@@ -85592,15 +85772,15 @@ msgid ""
 "When returning, you can mask the returned value with one of the "
 "[code]STEP_*[/code] constants."
 msgstr ""
-"执行自定义节点的逻辑，返回要使用的输出序列端口的索引，或者在有错误时返回一个"
+"执行自定义节点的逻辑，返回要使用的输出序列端口的索引，或者在有错误时返回一个 "
 "[String]。\n"
-"[code]inputs[/code]数组包含输入端口的值。\n"
-"[code]output[/code]是一个数组，其索引应被设置为相应的输出。\n"
-"[code]start_mode[/code]通常是[constant START_MODE_BEGIN_SEQUENCE]，除非你使用"
-"了[code]STEP_*[/code]常量。\n"
-"[code]working_mem[/code]是一个数组，可以用来在自定义节点的运行之间持续保存信"
-"息。其大小需要用[method _get_working_memory_size]来预定义。\n"
-"当返回时，你可以用[code]STEP_*[/code]中的一个常量来屏蔽返回值。"
+"[code]inputs[/code] 数组包含输入端口的值。\n"
+"[code]output[/code] 是一个数组，其索引应被设置为相应的输出。\n"
+"[code]start_mode[/code] 通常是[constant START_MODE_BEGIN_SEQUENCE]，除非你使"
+"用了 [code]STEP_*[/code] 常量。\n"
+"[code]working_mem[/code] 是一个数组，可以用来在自定义节点的运行之间持续保存信"
+"息。其大小需要用 [method _get_working_memory_size] 来预定义。\n"
+"当返回时，你可以用 [code]STEP_*[/code] 中的一个常量来屏蔽返回值。"
 
 #: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
 msgid "The start mode used the first time when [method _step] is called."
@@ -86103,7 +86283,7 @@ msgstr "数学常量。"
 
 #: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
 msgid "Unity: [code]1[/code]."
-msgstr "Unity：[code]1[/code]。"
+msgstr "单位一：[code]1[/code]。"
 
 #: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
 msgid "Pi: [code]3.141593[/code]."
@@ -86438,7 +86618,7 @@ msgid ""
 "[b]Output Ports:[/b]\n"
 "none"
 msgstr ""
-"结束一个函数的执行并将控制权返回给调用函数。可选，它可以返回一个[Variant]"
+"结束一个函数的执行并将控制权返回给调用函数。可选，它可以返回一个 [Variant] "
 "值。\n"
 "[b]输入端口：[/b]\n"
 "- 序列\n"
@@ -89274,9 +89454,8 @@ msgid ""
 "viewport_set_use_32_bpc_depth].\n"
 "[b]Note:[/b] Only available on the GLES3 backend."
 msgstr ""
-"如果为 "
-"[code]true[/code]，该视区会渲染至高动态范围（HDR）而不是标准动态范围（SDR）。"
-"另请参阅 [method viewport_set_use_32_bpc_depth]。\n"
+"如果为 [code]true[/code]，该视区会渲染至高动态范围（HDR）而不是标准动态范围"
+"（SDR）。另请参阅 [method viewport_set_use_32_bpc_depth]。\n"
 "[b]注意：[/b]仅在 GLES3 后端可用。"
 
 #: doc/classes/VisualServer.xml
@@ -89382,8 +89561,8 @@ msgid ""
 "on the same [Viewport] to set HDR to [code]true[/code].\n"
 "[b]Note:[/b] Only available on the GLES3 backend."
 msgstr ""
-"如果为 [code]true[/code]，分配该视区的帧缓冲时将使用完整浮点数精度（32 "
-"位）而不是半浮点数精度（16 位）。只有在同一个 [Viewport] 上通过 [method "
+"如果为 [code]true[/code]，分配该视区的帧缓冲时将使用完整浮点数精度（32 位）而"
+"不是半浮点数精度（16 位）。只有在同一个 [Viewport] 上通过 [method "
 "viewport_set_use_32_bpc_depth] 将 HDR 设为 [code]true[/code] 时有效。\n"
 "[b]注意：[/b]仅在 GLES3 后端中可用。"
 
@@ -90873,8 +91052,8 @@ msgid ""
 "function]. Returns a boolean scalar. Translates to [code]if[/code] "
 "instruction in shader code."
 msgstr ""
-"通过 [member function] 比较[code]a[/code]和[code]b[/code]的 [member type]。返"
-"回一个布尔标量。在着色器代码中转换成[code]if[/code]指令。"
+"通过 [member function] 比较 [code]a[/code] 和 [code]b[/code] 的 [member "
+"type]。返回一个布尔标量。在着色器代码中转换成 [code]if[/code] 指令。"
 
 #: doc/classes/VisualShaderNodeCompare.xml
 msgid ""
@@ -91397,12 +91576,12 @@ msgstr "移除所有先前指定的输出端口。"
 #: doc/classes/VisualShaderNodeGroupBase.xml
 msgid ""
 "Returns a free input port ID which can be used in [method add_input_port]."
-msgstr "返回一个空闲的输入端口ID，可以在[method add_input_port]中使用。"
+msgstr "返回一个空闲的输入端口 ID，可以在 [method add_input_port] 中使用。"
 
 #: doc/classes/VisualShaderNodeGroupBase.xml
 msgid ""
 "Returns a free output port ID which can be used in [method add_output_port]."
-msgstr "返回一个空闲的输出端口ID，可以在[method add_output_port]中使用。"
+msgstr "返回一个空闲的输出端口 ID，可以在 [method add_output_port] 中使用。"
 
 #: doc/classes/VisualShaderNodeGroupBase.xml
 msgid ""
@@ -92509,8 +92688,11 @@ msgstr ""
 "依赖，并允许引用被释放。"
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
-msgstr "返回此弱引用所指的 [Object]。"
+#, fuzzy
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
+msgstr "返回指定属性的初始值。如果属性不存在，则返回 [code]null[/code]。"
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
 msgid "Closes this data channel, notifying the other peer."
@@ -93353,7 +93535,7 @@ msgstr ""
 
 #: modules/websocket/doc_classes/WebSocketServer.xml
 msgid "Returns [code]true[/code] if a peer with the given ID is connected."
-msgstr "如果一个具有给定ID的对等体被连接，则返回 [code]true[/code]。"
+msgstr "如果一个具有给定 ID 的对等体被连接，则返回 [code]true[/code]。"
 
 #: modules/websocket/doc_classes/WebSocketServer.xml
 msgid ""
@@ -93473,8 +93655,8 @@ msgid ""
 "[b]Note:[/b] This signal is [i]not[/i] emitted when used as high-level "
 "multiplayer peer."
 msgstr ""
-"当收到一个新消息时触发。\n"
-"[b]注意：[/b]这个信号在用作高级多人对等的时候，[i]不会[/i]触发。"
+"当收到新消息时触发。\n"
+"[b]注意：[/b]这个信号[i]不会[/i]在用作高级多人对等体时触发。"
 
 #: modules/webxr/doc_classes/WebXRInterface.xml
 msgid "AR/VR interface using WebXR."
@@ -93936,10 +94118,10 @@ msgid ""
 msgstr ""
 "发出该消息以表明引用空间已被重置或重新配置。\n"
 "何时或是否发出取决于用户的浏览器或设备，但可能包括当用户改变了他们的游戏空间"
-"的尺寸，你可以通过[member bounds_geometry]访问，或按下/按住一个按钮来重新定位"
-"他们的位置。\n"
-"参阅[url=https://developer.mozilla.org/en-US/docs/Web/API/XRReferenceSpace/"
-"reset_event]WebXR的XRReferenceSpace重置事件[/url]。"
+"的尺寸，你可以通过 [member bounds_geometry] 访问，或按下/按住一个按钮来重新定"
+"位他们的位置。\n"
+"详情见 [url=https://developer.mozilla.org/en-US/docs/Web/API/"
+"XRReferenceSpace/reset_event]WebXR 的 XRReferenceSpace 重置事件[/url]。"
 
 #: modules/webxr/doc_classes/WebXRInterface.xml
 msgid ""
@@ -94275,7 +94457,7 @@ msgstr "从 [code]path[/code] 路径加载证书（“*.crt”文件）。"
 msgid ""
 "Saves a certificate to the given [code]path[/code] (should be a \"*.crt\" "
 "file)."
-msgstr "将一个证书保存到给定的 [code]path[/code]，应是一个“*.crt”文件。"
+msgstr "将证书保存到给定的 [code]path[/code]（应是“*.crt”文件）。"
 
 #: doc/classes/XMLParser.xml
 msgid ""
@@ -94291,8 +94473,8 @@ msgid ""
 "flexible standard, this interface is low-level so it can be applied to any "
 "possible schema."
 msgstr ""
-"这个类可以作为制作自定义 XML 解析器的基础。由于 XML 是一个非常灵活的标准，这"
-"个接口也是底层的，可被应用于任何可能的模式。"
+"这个类可以作为制作自定义 XML 解析器的基础。由于 XML 是非常灵活的标准，这个接"
+"口也是底层的，可被应用于任何可能的模式。"
 
 #: doc/classes/XMLParser.xml
 msgid "Gets the amount of attributes in the current element."
@@ -94398,7 +94580,7 @@ msgstr "没有节点，未打开文件或缓冲区。"
 
 #: doc/classes/XMLParser.xml
 msgid "Element (tag)."
-msgstr "元素，即标签。"
+msgstr "元素（标签）。"
 
 #: doc/classes/XMLParser.xml
 msgid "End of element."
@@ -94437,7 +94619,7 @@ msgstr ""
 "根据子节点的 Y 坐标对所有子节点进行排序。子节点必须继承自 [CanvasItem]，才能"
 "进行排序。Y 坐标较高的节点将后绘制，因此它们将出现在 Y 坐标较低的节点之上。\n"
 "YSort 节点可以嵌套。子节点将与父节点在相同的空间内进行排序，这样可以更好地组"
-"织一个场景或将其分为多个场景，但又能保持唯一的排序。"
+"织场景或将其分为多个场景，但又能保持唯一的排序。"
 
 #: doc/classes/YSort.xml
 msgid ""
diff --git a/doc/translations/zh_TW.po b/doc/translations/zh_TW.po
index 59cd8b199b..fd6f0ff27c 100644
--- a/doc/translations/zh_TW.po
+++ b/doc/translations/zh_TW.po
@@ -14,12 +14,13 @@
 # 曹恩逢 <nelson22768384@gmail.com>, 2022.
 # Otis Kao <momoslim@gmail.com>, 2022.
 # YuChiang Chang <chiang.c.tw@gmail.com>, 2022.
+# Hugel <qihu@nfschina.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-05-31 22:35+0000\n"
-"Last-Translator: YuChiang Chang <chiang.c.tw@gmail.com>\n"
+"PO-Revision-Date: 2022-08-25 13:04+0000\n"
+"Last-Translator: Hugel <qihu@nfschina.com>\n"
 "Language-Team: Chinese (Traditional) <https://hosted.weblate.org/projects/"
 "godot-engine/godot-class-reference/zh_Hant/>\n"
 "Language: zh_TW\n"
@@ -27,7 +28,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -87,7 +88,7 @@ msgstr ""
 
 #: doc/tools/make_rst.py
 msgid "Default"
-msgstr ""
+msgstr "默認"
 
 #: doc/tools/make_rst.py
 msgid "Setter"
@@ -119,7 +120,7 @@ msgstr ""
 
 #: doc/tools/make_rst.py
 msgid "This method is used to construct a type."
-msgstr ""
+msgstr "此方法用於構造類型。"
 
 #: doc/tools/make_rst.py
 msgid ""
@@ -634,8 +635,9 @@ msgid ""
 "[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
 "[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
 "located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/"
-"code]).\n"
+"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
+"Use [method clamp] on the result of [method inverse_lerp] if this is not "
+"desired.\n"
 "[codeblock]\n"
 "# The interpolation ratio in the `lerp()` call below is 0.75.\n"
 "var middle = lerp(20, 30, 0.75)\n"
@@ -645,7 +647,8 @@ msgid ""
 "var ratio = inverse_lerp(20, 30, 27.5)\n"
 "# `ratio` is now 0.75.\n"
 "[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation."
+"See also [method lerp] which performs the reverse of this operation, and "
+"[method range_lerp] to map a continuous series of values to another."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -700,7 +703,8 @@ msgid ""
 "[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
 "between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
 "outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i].\n"
+"i]. Use [method clamp] on the result of [method lerp] if this is not "
+"desired.\n"
 "If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
 "[float], the return value is a [float].\n"
 "If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
@@ -712,7 +716,8 @@ msgid ""
 "[/codeblock]\n"
 "See also [method inverse_lerp] which performs the reverse of this operation. "
 "To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]."
+"ease] or [method smoothstep]. See also [method range_lerp] to map a "
+"continuous series of values to another."
 msgstr "**fdffffffffffffffwsfsdfsdfsfdsdf**"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1134,10 +1139,15 @@ msgstr ""
 #: modules/gdscript/doc_classes/@GDScript.xml
 msgid ""
 "Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code].\n"
+"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
+"[code]value[/code] is outside [code][istart, istop][/code], then the "
+"resulting value will also be outside [code][ostart, ostop][/code]. Use "
+"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
 "[codeblock]\n"
 "range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"For complex use cases where you need multiple ranges, consider using [Curve] "
+"or [Gradient] instead."
 msgstr ""
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -4956,19 +4966,21 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
-msgid "Gets the text caption for this node (used by some editors)."
+msgid ""
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"override the text caption for this node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets a child node by index (used by editors inheriting from "
-"[AnimationRootNode])."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a child node by its [code]name[/code]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets all children nodes in order as a [code]name: node[/code] dictionary. "
-"Only useful when inheriting [AnimationRootNode]."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return all children nodes in order as a [code]name: node[/code] dictionary."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -4989,21 +5001,25 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the default value of a parameter. Parameters are custom local memory "
-"used for your nodes, given a resource can be reused in multiple trees."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return the default value of parameter \"[code]name[/code]\". Parameters are "
+"custom local memory used for your nodes, given a resource can be reused in "
+"multiple trees."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Gets the property information for parameter. Parameters are custom local "
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return a list of the properties on this node. Parameters are custom local "
 "memory used for your nodes, given a resource can be reused in multiple "
 "trees. Format is similar to [method Object.get_property_list]."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"Returns [code]true[/code] whether you want the blend tree editor to display "
-"filter editing on this node."
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"return whether the blend tree editor should display filter editing on this "
+"node."
 msgstr ""
 
 #: doc/classes/AnimationNode.xml
@@ -5013,9 +5029,10 @@ msgstr "回傳參數的正切值。"
 
 #: doc/classes/AnimationNode.xml
 msgid ""
-"User-defined callback called when a custom node is processed. The "
-"[code]time[/code] parameter is a relative delta, unless [code]seek[/code] is "
-"[code]true[/code], in which case it is absolute.\n"
+"When inheriting from [AnimationRootNode], implement this virtual method to "
+"run some code when this node is processed. The [code]time[/code] parameter "
+"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
+"case it is absolute.\n"
 "Here, call the [method blend_input], [method blend_node] or [method "
 "blend_animation] functions. You can also use [method get_parameter] and "
 "[method set_parameter] to modify local memory.\n"
@@ -5667,9 +5684,9 @@ msgid ""
 "Turn on auto advance when this condition is set. The provided name will "
 "become a boolean parameter on the [AnimationTree] that can be controlled "
 "from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). For example, if [member AnimationTree."
-"tree_root] is an [AnimationNodeStateMachine] and [member advance_condition] "
-"is set to [code]\"idle\"[/code]:\n"
+"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
+"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
+"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
 "[codeblock]\n"
 "$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
 "(linear_velocity.x == 0)\n"
@@ -5843,8 +5860,8 @@ msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
 msgid ""
-"Returns the [Animation] with key [code]name[/code] or [code]null[/code] if "
-"not found."
+"Returns the [Animation] with the key [code]name[/code]. If the animation "
+"does not exist, [code]null[/code] is returned and an error is logged."
 msgstr ""
 
 #: doc/classes/AnimationPlayer.xml
@@ -8849,8 +8866,9 @@ msgid ""
 "resource is applied on."
 msgstr ""
 
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectRecord.xml
-#: doc/classes/AudioServer.xml doc/classes/AudioStream.xml
+#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
+#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
+#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
 #: doc/classes/AudioStreamPlayer.xml
 msgid "Audio Mic Record Demo"
 msgstr ""
@@ -8901,10 +8919,20 @@ msgid ""
 "attached audio effect bus into its internal ring buffer.\n"
 "Application code should consume these audio frames from this ring buffer "
 "using [method get_buffer] and process it as needed, for example to capture "
-"data from a microphone, implement application defined effects, or to "
-"transmit audio over the network. When capturing audio data from a "
+"data from an [AudioStreamMicrophone], implement application-defined effects, "
+"or to transmit audio over the network. When capturing audio data from a "
 "microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM."
+"PCM.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
+#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
+#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
+#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
+msgid "Audio buses"
 msgstr ""
 
 #: doc/classes/AudioEffectCapture.xml
@@ -9147,12 +9175,6 @@ msgid ""
 "coming from some saturated device or speaker very efficiently."
 msgstr ""
 
-#: doc/classes/AudioEffectDistortion.xml doc/classes/AudioEffectFilter.xml
-#: doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
 #: doc/classes/AudioEffectDistortion.xml
 msgid "Distortion power. Value can range from 0 to 1."
 msgstr ""
@@ -9698,7 +9720,12 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio input devices detected on the system."
+msgid ""
+"Returns the names of all audio input devices detected on the system.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -9859,12 +9886,16 @@ msgstr ""
 
 #: doc/classes/AudioServer.xml
 msgid ""
-"Name of the current device for audio input (see [method get_device_list]). "
-"On systems with multiple audio inputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio input device. The value "
-"[code]\"Default\"[/code] will record audio on the system-wide default audio "
-"input. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
+"Name of the current device for audio input (see [method "
+"capture_get_device_list]). On systems with multiple audio inputs (such as "
+"analog, USB and HDMI audio), this can be used to select the audio input "
+"device. The value [code]\"Default\"[/code] will record audio on the system-"
+"wide default audio input. If an invalid device name is set, the value will "
+"be reverted back to [code]\"Default\"[/code].\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
 msgstr ""
 
 #: doc/classes/AudioServer.xml
@@ -10012,6 +10043,21 @@ msgid ""
 "GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
 msgstr ""
 
+#: doc/classes/AudioStreamMicrophone.xml
+msgid "Plays real-time audio input data."
+msgstr ""
+
+#: doc/classes/AudioStreamMicrophone.xml
+msgid ""
+"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
+"plays back microphone input in real-time. This can be used in conjunction "
+"with [AudioEffectCapture] to process the data or save it.\n"
+"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
+"[code]true[/code] for audio input to work. See also that setting's "
+"description for caveats related to permissions and operating system privacy "
+"settings."
+msgstr ""
+
 #: modules/minimp3/doc_classes/AudioStreamMP3.xml
 msgid "MP3 audio stream driver."
 msgstr ""
@@ -10152,7 +10198,10 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer2D.xml
 msgid ""
-"Plays audio that dampens with distance from screen center.\n"
+"Plays audio that dampens with distance from a given position.\n"
+"By default, audio is heard from the screen center. This can be changed by "
+"adding a [Listener2D] node to the scene and enabling it by calling [method "
+"Listener2D.make_current] on it.\n"
 "See also [AudioStreamPlayer] to play a sound non-positionally.\n"
 "[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
 "output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
@@ -11833,7 +11882,7 @@ msgid ""
 "Sets the camera projection to frustum mode (see [constant "
 "PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
 "code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units."
+"world space units. See also [member frustum_offset]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11926,7 +11975,9 @@ msgstr ""
 msgid ""
 "The camera's frustum offset. This can be changed from the default to create "
 "\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url]."
+"shearing[/url].\n"
+"[b]Note:[/b] Only effective if [member projection] is [constant "
+"PROJECTION_FRUSTUM]."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -11954,9 +12005,9 @@ msgstr ""
 
 #: doc/classes/Camera.xml
 msgid ""
-"The camera's size measured as 1/2 the width or height. Only applicable in "
-"orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
-"[code]size[/code] sets the other axis' size length."
+"The camera's size in meters measured as the diameter of the width or height, "
+"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
+"modes."
 msgstr ""
 
 #: doc/classes/Camera.xml
@@ -12458,13 +12509,14 @@ msgid ""
 "inherit and extend their parent's transform. [CanvasItem] is extended by "
 "[Control] for anything GUI-related, and by [Node2D] for anything related to "
 "the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] must be called, then "
-"[constant NOTIFICATION_DRAW] will be received on idle time to request "
-"redraw. Because of this, canvas items don't need to be redrawn on every "
-"frame, improving the performance significantly. Several functions for "
+"Any [CanvasItem] can draw. For this, [method update] is called by the "
+"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
+"request redraw. Because of this, canvas items don't need to be redrawn on "
+"every frame, improving the performance significantly. Several functions for "
 "drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside the [method Object."
-"_notification], signal or [method _draw] virtual functions.\n"
+"functions). However, they can only be used inside [method _draw], its "
+"corresponding [method Object._notification] or methods connected to the "
+"[signal draw] signal.\n"
 "Canvas items are drawn in tree order. By default, children are on top of "
 "their parents so a root [CanvasItem] will be drawn behind everything. This "
 "behavior can be changed on a per-item basis.\n"
@@ -12490,8 +12542,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Overridable function called by the engine (if defined) to draw the canvas "
-"item."
+"Called when [CanvasItem] has been requested to redraw (when [method update] "
+"is called, either manually or by the engine).\n"
+"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
+"Object._notification]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12804,12 +12858,12 @@ msgid ""
 "to children."
 msgstr ""
 
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
+#: doc/classes/CanvasItem.xml
 msgid ""
 "Returns [code]true[/code] if the node is present in the [SceneTree], its "
 "[member visible] property is [code]true[/code] and all its antecedents are "
 "also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
+"the scene tree, and is consequently not drawn (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12854,8 +12908,10 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Queue the [CanvasItem] for update. [constant NOTIFICATION_DRAW] will be "
-"called on idle time to request redraw."
+"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
+"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
+"This only occurs [b]once[/b] per frame, even if this method has been called "
+"multiple times."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12903,8 +12959,11 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"Emitted when the [CanvasItem] must redraw. This can only be connected "
-"realtime, as deferred will not allow drawing."
+"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
+"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
+"is called.\n"
+"[b]Note:[/b] Deferred connections do not allow drawing through the "
+"[code]draw_*[/code] methods."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12966,7 +13025,7 @@ msgid ""
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] is requested to draw."
+msgid "The [CanvasItem] is requested to draw (see [method _draw])."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -13091,7 +13150,10 @@ msgstr ""
 
 #: doc/classes/CanvasLayer.xml
 msgid ""
-"Sets the layer to follow the viewport in order to simulate a pseudo 3D "
+"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
+"move when camera moves instead of being anchored in a fixed position on the "
+"screen.\n"
+"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
 "effect."
 msgstr ""
 
@@ -16088,7 +16150,9 @@ msgstr ""
 #: doc/classes/Control.xml
 msgid ""
 "Steal the focus from another control and become the focused control (see "
-"[member focus_mode])."
+"[member focus_mode]).\n"
+"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
+"makes it more reliable, especially when called inside [method Node._ready]."
 msgstr ""
 
 #: doc/classes/Control.xml
@@ -18819,7 +18883,9 @@ msgstr ""
 msgid ""
 "A curve that can be saved and re-used for other objects. By default, it "
 "ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position."
+"points relative to the [code]0.5[/code] Y position.\n"
+"See also [Gradient] which is designed for color interpolation. See also "
+"[Curve2D] and [Curve3D]."
 msgstr ""
 
 #: doc/classes/Curve.xml
@@ -18968,16 +19034,17 @@ msgid ""
 "further calculations."
 msgstr ""
 
-#: doc/classes/Curve2D.xml
+#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve2D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the "
+"curve's own position, with control points [code]in[/code] and [code]out[/"
+"code]. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
@@ -19123,18 +19190,6 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Curve3D.xml
-msgid ""
-"Adds a point to a curve at [code]position[/code] relative to the [Curve3D]'s "
-"position, with control points [code]in[/code] and [code]out[/code].\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position <0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
 #, fuzzy
 msgid "Returns the cache of points as a [PoolVector3Array]."
 msgstr "回傳參數的反正弦值。"
@@ -24049,8 +24104,12 @@ msgstr ""
 
 #: doc/classes/File.xml
 msgid ""
-"Returns the whole file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
+"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
+"encoded.\n"
+"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
+"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
+"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
+"convention)."
 msgstr ""
 
 #: doc/classes/File.xml
@@ -24671,7 +24730,9 @@ msgid ""
 "[code]next[/code] is passed. clipping the width. [code]position[/code] "
 "specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
 "must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character."
+"making this function useful for drawing strings character by character.\n"
+"If [code]outline[/code] is [code]true[/code], the outline of the character "
+"is drawn instead of the character itself."
 msgstr ""
 
 #: doc/classes/Font.xml
@@ -26259,10 +26320,13 @@ msgstr ""
 #: doc/classes/Gradient.xml
 msgid ""
 "Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the ramp will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The ramp "
-"will initially have 2 colors (black and white), one (black) at ramp lower "
-"offset 0 and the other (white) at the ramp higher offset 1."
+"means that if you have color 1, color 2 and color 3, the gradient will "
+"interpolate from color 1 to color 2 and from color 2 to color 3. The "
+"gradient will initially have 2 colors (black and white), one (black) at "
+"gradient lower offset 0 and the other (white) at the gradient higher offset "
+"1.\n"
+"See also [Curve] which supports more complex easing methods, but does not "
+"support colors."
 msgstr ""
 
 #: doc/classes/Gradient.xml
@@ -27678,8 +27742,8 @@ msgstr ""
 msgid ""
 "Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
 "to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases. [b]See the "
-"[HTTPRequest] node for a higher-level alternative.[/b]\n"
+"or to communicate with various services, among other use cases.\n"
+"See the [HTTPRequest] node for a higher-level alternative.\n"
 "[b]Note:[/b] This client only needs to connect to a host once (see [method "
 "connect_to_host]) to send multiple requests. Because of this, methods that "
 "take URLs usually take just the part after the host instead of the full URL, "
@@ -29981,11 +30045,14 @@ msgstr ""
 
 #: doc/classes/Input.xml
 msgid ""
-"Vibrate Android and iOS devices.\n"
+"Vibrate handheld devices.\n"
+"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
 "[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
 "permission in the export preset.\n"
 "[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later."
+"later.\n"
+"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
+"support this method."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30831,7 +30898,11 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
-"Not thread-safe. Use [method Object.call_deferred] if calling from a thread."
+"Call this method to actually load in the node. The created node will be "
+"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
+"tree. The [Node]'s reference is also returned for convenience.\n"
+"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
+"call_deferred] if calling from a thread."
 msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
@@ -30843,6 +30914,16 @@ msgstr ""
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
+"Returns the list of properties that will be applied to the node when [method "
+"create_instance] is called.\n"
+"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
+"code] (note the leading period) is added to the dictionary. This [code]."
+"order[/code] key is an [Array] of [String] property names specifying the "
+"order in which properties will be applied (with index 0 being the first)."
+msgstr ""
+
+#: doc/classes/InstancePlaceholder.xml
+msgid ""
 "Replaces this placeholder by the scene handed as an argument, or the "
 "original scene if no argument is given. As for all resources, the scene is "
 "loaded only if it's not loaded already. By manually loading the scene "
@@ -33204,14 +33285,14 @@ msgstr ""
 
 #: doc/classes/Line2D.xml
 msgid ""
-"Adds a point at the [code]position[/code]. Appends the point at the end of "
-"the line.\n"
-"If [code]at_position[/code] is given, the point is inserted before the point "
-"number [code]at_position[/code], moving that point (and every point after) "
-"after the inserted point. If [code]at_position[/code] is not given, or is an "
-"illegal value ([code]at_position < 0[/code] or [code]at_position >= [method "
-"get_point_count][/code]), the point will be appended at the end of the point "
-"list."
+"Adds a point with the specified [code]position[/code] relative to the line's "
+"own position. Appends the new point at the end of the point list.\n"
+"If [code]index[/code] is given, the new point is inserted before the "
+"existing point identified by index [code]index[/code]. Every existing point "
+"starting from [code]index[/code] is shifted further down the list of points. "
+"The index must be greater than or equal to [code]0[/code] and must not "
+"exceed the number of existing points in the line. See [method "
+"get_point_count]."
 msgstr ""
 
 #: doc/classes/Line2D.xml
@@ -33219,22 +33300,26 @@ msgid "Removes all points from the line."
 msgstr ""
 
 #: doc/classes/Line2D.xml
-msgid "Returns the Line2D's amount of points."
-msgstr ""
+#, fuzzy
+msgid "Returns the amount of points in the line."
+msgstr "回傳參數的正弦值。"
 
 #: doc/classes/Line2D.xml
-msgid "Returns point [code]i[/code]'s position."
-msgstr ""
+#, fuzzy
+msgid "Returns the position of the point at index [code]index[/code]."
+msgstr "計算兩個向量的外積。"
 
 #: doc/classes/Line2D.xml
-msgid "Removes the point at index [code]i[/code] from the line."
-msgstr ""
+#, fuzzy
+msgid "Removes the point at index [code]index[/code] from the line."
+msgstr "計算兩個向量的外積。"
 
 #: doc/classes/Line2D.xml
+#, fuzzy
 msgid ""
-"Overwrites the position in point [code]i[/code] with the supplied "
-"[code]position[/code]."
-msgstr ""
+"Overwrites the position of the point at index [code]index[/code] with the "
+"supplied [code]position[/code]."
+msgstr "計算兩個向量的外積。"
 
 #: doc/classes/Line2D.xml
 msgid ""
@@ -34811,9 +34896,9 @@ msgid ""
 "MeshInstance is a node that takes a [Mesh] resource and adds it to the "
 "current scenario by creating an instance of it. This is the class most often "
 "used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows to reuse geometry and save on resources. When a "
-"[Mesh] has to be instanced more than thousands of times at close proximity, "
-"consider using a [MultiMesh] in a [MultiMeshInstance] instead."
+"in many places. This allows reusing geometry, which can save on resources. "
+"When a [Mesh] has to be instanced more than thousands of times at close "
+"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35274,7 +35359,9 @@ msgid ""
 "existing vertex colors.\n"
 "For the color to take effect, ensure that [member color_format] is non-"
 "[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material."
+"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
+"color doesn't look as expected, make sure the material's albedo color is set "
+"to pure white ([code]Color(1, 1, 1)[/code])."
 msgstr ""
 
 #: doc/classes/MultiMesh.xml
@@ -36412,7 +36499,7 @@ msgstr ""
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
 "Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]."
+"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
 msgstr ""
 
 #: doc/classes/NavigationAgent2D.xml
@@ -37238,13 +37325,25 @@ msgstr ""
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647)."
+"and 2147483647).\n"
+"Can only be called if the connection status is [constant "
+"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
+"set_connection_status]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
 msgid ""
 "Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus]."
+"ConnectionStatus].\n"
+"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
+"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
+"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
+"status and if the peer has the unique network id of [code]1[/code].\n"
+"You can only change to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
+"CONNECTION_CONNECTING]."
 msgstr ""
 
 #: doc/classes/NetworkedMultiplayerCustom.xml
@@ -40914,7 +41013,9 @@ msgid ""
 "are also subject to automatic adjustments by the operating system. [b]Always "
 "use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
 "calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease)."
+"decrease).\n"
+"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
+"use [method Time.get_unix_time_from_system]."
 msgstr ""
 
 #: doc/classes/OS.xml
@@ -46300,7 +46401,9 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 #, fuzzy
-msgid "Sets the currently focused item as the given [code]index[/code]."
+msgid ""
+"Sets the currently focused item as the given [code]index[/code].\n"
+"Passing [code]-1[/code] as the index makes so that no item is focused."
 msgstr "計算兩個向量的外積。"
 
 #: doc/classes/PopupMenu.xml
@@ -46539,7 +46642,9 @@ msgstr ""
 msgid ""
 "Class for displaying popups with a panel background. In some cases it might "
 "be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog]."
+"If you are making windows, better check [WindowDialog].\n"
+"If any [Control] node is added as a child of this [PopupPanel], it will be "
+"stretched to fit the panel's size (similar to how [PanelContainer] works)."
 msgstr ""
 
 #: doc/classes/PopupPanel.xml
@@ -47269,7 +47374,11 @@ msgstr ""
 #: doc/classes/ProjectSettings.xml
 msgid ""
 "If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS."
+"appropriate permissions to be set when exporting to Android or iOS.\n"
+"[b]Note:[/b] If the operating system blocks access to audio input devices "
+"(due to the user's privacy settings), audio capture will only return "
+"silence. On Windows 10 and later, make sure that apps are allowed to access "
+"the microphone in the OS' privacy settings."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49950,8 +50059,19 @@ msgstr ""
 msgid ""
 "Maximum anisotropic filter level used for textures with anisotropy enabled. "
 "Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. Only power-of-two values are valid (2, "
-"4, 8, 16)."
+"angles, at the cost of performance. With the exception of [code]1[/code], "
+"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
+"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
+"anisotropic filtering, even on textures where it is enabled.\n"
+"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
+"enabled by default[/i] on textures. For this setting to have an effect, "
+"anisotropic texture filtering can be enabled by selecting a texture in the "
+"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
+"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
+"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
+"meaningful visual difference.\n"
+"[b]Note:[/b] This property is only read when the project starts. There is "
+"currently no way to change this setting at run-time."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -53970,7 +54090,9 @@ msgid ""
 "cannot be instantiated.\n"
 "[b]Note:[/b] The scene change is deferred, which means that the new scene "
 "node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call."
+"immediately after the [method change_scene_to] call.\n"
+"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
+"unload the current scene without loading a new one."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -54114,13 +54236,19 @@ msgstr ""
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes."
+"from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_collisions_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
 msgid ""
 "If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes."
+"game from the editor for debugging purposes.\n"
+"[b]Note:[/b] This property is not designed to be changed at run-time. "
+"Changing the value of [member debug_navigation_hint] while the project is "
+"running will not have the desired effect."
 msgstr ""
 
 #: doc/classes/SceneTree.xml
@@ -55310,7 +55438,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Shape2D.xml
-msgid "The shape's custom solver bias."
+msgid ""
+"The shape's custom solver bias. Defines how much bodies react to enforce "
+"contact separation when this shape is involved.\n"
+"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
 msgstr ""
 
 #: doc/classes/ShortCut.xml
@@ -55930,6 +56061,14 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Returns [code]true[/code] if the node is present in the [SceneTree], its "
+"[member visible] property is [code]true[/code] and all its antecedents are "
+"also visible. If any antecedent is hidden, this node will not be visible in "
+"the scene tree."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotates the node so that the local forward axis (-Z) points toward the "
 "[code]target[/code] position.\n"
 "The local up axis (+Y) points as close to the [code]up[/code] vector as "
@@ -56264,7 +56403,9 @@ msgid ""
 "[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
 "texture filtering. Anisotropic texture filtering can be enabled by selecting "
 "a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]."
+"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
+"filtering level can be changed by adjusting [member ProjectSettings."
+"rendering/quality/filters/anisotropic_filter_level]."
 msgstr ""
 
 #: doc/classes/SpatialMaterial.xml
@@ -57698,7 +57839,7 @@ msgstr ""
 #: doc/classes/Sprite3D.xml
 msgid ""
 "[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden."
+"used, this will be overridden. The size information is still used."
 msgstr ""
 
 #: doc/classes/SpriteBase3D.xml
@@ -58965,6 +59106,9 @@ msgid ""
 "the substrings, starting from right.\n"
 "The splits in the returned array are sorted in the same order as the "
 "original string, from left to right.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the right up to [code]maxsplit[/code]. The default value of 0 means "
 "that all items are split, thus giving the same result as [method split].\n"
@@ -59026,6 +59170,9 @@ msgstr ""
 msgid ""
 "Splits the string by a [code]delimiter[/code] string and returns an array of "
 "the substrings. The [code]delimiter[/code] can be of any length.\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position.\n"
 "If [code]maxsplit[/code] is specified, it defines the number of splits to do "
 "from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
 "code] means that all items are split.\n"
@@ -59048,7 +59195,10 @@ msgid ""
 "Splits the string in floats by using a delimiter string and returns an array "
 "of the substrings.\n"
 "For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code]."
+"split by [code]\",\"[/code].\n"
+"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
+"delimiters in the string, it will add an empty string to the array of "
+"substrings at this position."
 msgstr ""
 
 #: doc/classes/String.xml
@@ -60185,6 +60335,11 @@ msgid "Returns [code]true[/code] if select with right mouse button is enabled."
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "計算兩個向量的外積。"
+
+#: doc/classes/Tabs.xml
 msgid "Returns the number of hidden tabs offsetted to the left."
 msgstr ""
 
@@ -60215,6 +60370,11 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
+#, fuzzy
+msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
+msgstr "計算兩個向量的外積。"
+
+#: doc/classes/Tabs.xml
 msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
 msgstr ""
 
@@ -60256,7 +60416,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Tabs.xml
-msgid "Emitted when a tab is right-clicked."
+msgid ""
+"Emitted when a tab's right button is pressed. See [method "
+"set_tab_button_icon]."
 msgstr ""
 
 #: doc/classes/Tabs.xml
@@ -65140,21 +65302,25 @@ msgid "Makes subsequent actions with the same name be merged into one."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP network functions."
+msgid ""
+"Universal Plug and Play (UPnP) functions for network device discovery, "
+"querying and port forwarding."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
-"Provides UPNP functionality to discover [UPNPDevice]s on the local network "
-"and execute commands on them, like managing port mappings (port forwarding) "
-"and querying the local and remote network IP address. Note that methods on "
-"this class are synchronous and block the calling thread.\n"
-"To forward a specific port:\n"
+"This class can be used to discover compatible [UPNPDevice]s on the local "
+"network and execute commands on them, like managing port mappings (for port "
+"forwarding/NAT traversal) and querying the local and remote network IP "
+"address. Note that methods on this class are synchronous and block the "
+"calling thread.\n"
+"To forward a specific port (here [code]7777[/code], note both [method "
+"discover] and [method add_port_mapping] can return errors that should be "
+"checked):\n"
 "[codeblock]\n"
-"const PORT = 7777\n"
 "var upnp = UPNP.new()\n"
-"upnp.discover(2000, 2, \"InternetGatewayDevice\")\n"
-"upnp.add_port_mapping(port)\n"
+"upnp.discover()\n"
+"upnp.add_port_mapping(7777)\n"
 "[/codeblock]\n"
 "To close a specific port (e.g. after you have finished using it):\n"
 "[codeblock]\n"
@@ -65167,7 +65333,7 @@ msgid ""
 "or failure).\n"
 "signal upnp_completed(error)\n"
 "\n"
-"# Replace this with your own server port number between 1025 and 65535.\n"
+"# Replace this with your own server port number between 1024 and 65535.\n"
 "const SERVER_PORT = 3928\n"
 "var thread = null\n"
 "\n"
@@ -65196,7 +65362,39 @@ msgid ""
 "    # Wait for thread finish here to handle game exit while the thread is "
 "running.\n"
 "    thread.wait_to_finish()\n"
-"[/codeblock]"
+"[/codeblock]\n"
+"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
+"\"internet gateway device\", short IGD) refers to network devices that allow "
+"computers in the local network to access the internet (\"wide area "
+"network\", WAN). These gateways are often also called \"routers\".\n"
+"[b]Pitfalls:[/b]\n"
+"- As explained above, these calls are blocking and shouldn't be run on the "
+"main thread, especially as they can block for multiple seconds at a time. "
+"Use threading!\n"
+"- Networking is physical and messy. Packets get lost in transit or get "
+"filtered, addresses, free ports and assigned mappings change, and devices "
+"may leave or join the network at any time. Be mindful of this, be diligent "
+"when checking and handling errors, and handle these gracefully if you can: "
+"add clear error UI, timeouts and re-try handling.\n"
+"- Port mappings may change (and be removed) at any time, and the remote/"
+"external IP address of the gateway can change likewise. You should consider "
+"re-querying the external IP and try to update/refresh the port mapping "
+"periodically (for example, every 5 minutes and on networking failures).\n"
+"- Not all devices support UPnP, and some users disable UPnP support. You "
+"need to handle this (e.g. documenting and requiring the user to manually "
+"forward ports, or adding alternative methods of NAT traversal, like a relay/"
+"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
+"- Consider what happens on mapping conflicts. Maybe multiple users on the "
+"same network would like to play your game at the same time, or maybe another "
+"application uses the same port. Make the port configurable, and optimally "
+"choose a port automatically (re-trying with a different port on failure).\n"
+"[b]Further reading:[/b] If you want to know more about UPnP (and the "
+"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
+"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
+"is a good first stop, the specification can be found at the [url=https://"
+"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
+"Connectivity Foundation[/url] and Godot's implementation is based on the "
+"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65206,22 +65404,35 @@ msgstr ""
 #: modules/upnp/doc_classes/UPNP.xml
 msgid ""
 "Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535) on the default gateway (see [method get_gateway]) to the "
-"[code]internal_port[/code] on the local machine for the given protocol "
-"[code]proto[/code] (either [code]TCP[/code] or [code]UDP[/code], with UDP "
-"being the default). If a port mapping for the given port and protocol "
-"combination already exists on that gateway device, this method tries to "
-"overwrite it. If that is not desired, you can retrieve the gateway manually "
-"with [method get_gateway] and call [method add_port_mapping] on it, if any.\n"
+"65535, although recommended to use port 1024 or above) on the default "
+"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
+"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
+"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
+"for the given port and protocol combination already exists on that gateway "
+"device, this method tries to overwrite it. If that is not desired, you can "
+"retrieve the gateway manually with [method get_gateway] and call [method "
+"add_port_mapping] on it, if any. Note that forwarding a well-known port "
+"(below 1024) with UPnP may fail depending on the device.\n"
+"Depending on the gateway device, if a mapping for that port already exists, "
+"it will either be updated or it will refuse this command due to that "
+"conflict, especially if the existing mapping for that port wasn't created "
+"via UPnP or points to a different network address (or device) than this "
+"one.\n"
 "If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
 "number is used for both the external and the internal port (the [code]port[/"
 "code] value).\n"
-"The description ([code]desc[/code]) is shown in some router UIs and can be "
-"used to point out which application added the mapping. The mapping's lease "
-"duration can be limited by specifying a [code]duration[/code] (in seconds). "
-"However, some routers are incompatible with one or both of these, so use "
-"with caution and add fallback logic in case of errors to retry without them "
-"if in doubt.\n"
+"The description ([code]desc[/code]) is shown in some routers management UIs "
+"and can be used to point out which application added the mapping.\n"
+"The mapping's lease [code]duration[/code] can be limited by specifying a "
+"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
+"permanent lease and notably some devices only support these permanent "
+"leases. Note that whether permanent or not, this is only a request and the "
+"gateway may still decide at any point to remove the mapping (which usually "
+"happens on a reboot of the gateway, when its external IP address changes, or "
+"on some models when it detects a port mapping has become inactive, i.e. had "
+"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
+"allowed range according to spec is between [code]120[/code] (2 minutes) and "
+"[code]86400[/code] seconds (24 hours).\n"
 "See [enum UPNPResult] for possible return values."
 msgstr ""
 
@@ -65234,8 +65445,10 @@ msgid ""
 "Deletes the port mapping for the given port and protocol combination on the "
 "default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
 "must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. See [enum UPNPResult] for possible "
-"return values."
+"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
+"to addresses other than this one, for well-known ports (below 1024), or for "
+"mappings not added via UPnP. See [enum UPNPResult] for possible return "
+"values."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNP.xml
@@ -65433,16 +65646,16 @@ msgid "Unknown error."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "UPNP device."
+msgid "Universal Plug and Play (UPnP) device."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
 msgid ""
-"UPNP device. See [UPNP] for UPNP discovery and utility functions. Provides "
-"low-level access to UPNP control commands. Allows to manage port mappings "
-"(port forwarding) and to query network information of the device (like local "
-"and external IP address and status). Note that methods on this class are "
-"synchronous and block the calling thread."
+"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
+"utility functions. Provides low-level access to UPNP control commands. "
+"Allows to manage port mappings (port forwarding) and to query network "
+"information of the device (like local and external IP address and status). "
+"Note that methods on this class are synchronous and block the calling thread."
 msgstr ""
 
 #: modules/upnp/doc_classes/UPNPDevice.xml
@@ -74101,7 +74314,9 @@ msgid ""
 msgstr ""
 
 #: doc/classes/WeakRef.xml
-msgid "Returns the [Object] this weakref is referring to."
+msgid ""
+"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
+"if that object no longer exists."
 msgstr ""
 
 #: modules/webrtc/doc_classes/WebRTCDataChannel.xml
diff --git a/editor/scene_tree_editor.cpp b/editor/scene_tree_editor.cpp
index 50bb6496e1..137574640e 100644
--- a/editor/scene_tree_editor.cpp
+++ b/editor/scene_tree_editor.cpp
@@ -603,7 +603,7 @@ void SceneTreeEditor::_update_tree(bool p_scroll_to_selected) {
 	updating_tree = false;
 	tree_dirty = false;
 
-	if (!filter.is_empty()) {
+	if (!filter.strip_edges().is_empty()) {
 		_update_filter(nullptr, p_scroll_to_selected);
 	}
 }
@@ -618,18 +618,28 @@ bool SceneTreeEditor::_update_filter(TreeItem *p_parent, bool p_scroll_to_select
 		return false;
 	}
 
-	bool keep = false;
+	bool keep_for_children = false;
 	for (TreeItem *child = p_parent->get_first_child(); child; child = child->get_next()) {
-		keep = _update_filter(child, p_scroll_to_selected) || keep;
+		// Always keep if at least one of the children are kept.
+		keep_for_children = _update_filter(child, p_scroll_to_selected) || keep_for_children;
 	}
 
-	if (!keep) {
-		StringName node_type = get_node(p_parent->get_metadata(0))->get_class();
-		bool is_kept_by_type = (filter.begins_with("type:") && filter.trim_prefix("type:").is_subsequence_ofn(node_type)) || (filter.begins_with("t:") && filter.trim_prefix("t:").is_subsequence_ofn(node_type));
-		keep = (filter.is_subsequence_ofn(p_parent->get_text(0)) || is_kept_by_type);
+	// Now find other reasons to keep this Node, too.
+	PackedStringArray terms = filter.to_lower().split_spaces();
+	bool keep = _item_matches_all_terms(p_parent, terms);
+
+	p_parent->set_visible(keep_for_children || keep);
+	if (keep_for_children) {
+		if (keep) {
+			p_parent->clear_custom_color(0);
+			p_parent->set_selectable(0, true);
+		} else {
+			p_parent->set_custom_color(0, get_theme_color(SNAME("disabled_font_color"), SNAME("Editor")));
+			p_parent->set_selectable(0, false);
+			p_parent->deselect(0);
+		}
 	}
 
-	p_parent->set_visible(keep);
 	if (editor_selection) {
 		Node *n = get_node(p_parent->get_metadata(0));
 		if (keep) {
@@ -644,7 +654,68 @@ bool SceneTreeEditor::_update_filter(TreeItem *p_parent, bool p_scroll_to_select
 		}
 	}
 
-	return keep;
+	return keep || keep_for_children;
+}
+
+bool SceneTreeEditor::_item_matches_all_terms(TreeItem *p_item, PackedStringArray p_terms) {
+	if (p_terms.is_empty()) {
+		return true;
+	}
+
+	for (int i = 0; i < p_terms.size(); i++) {
+		String term = p_terms[i];
+
+		// Recognise special filter.
+		if (term.contains(":") && !term.get_slicec(':', 0).is_empty()) {
+			String parameter = term.get_slicec(':', 0);
+			String argument = term.get_slicec(':', 1);
+
+			if (parameter == "type" || parameter == "t") {
+				// Filter by Type.
+				String node_type = get_node(p_item->get_metadata(0))->get_class().to_lower();
+
+				if (!node_type.contains(argument)) {
+					return false;
+				}
+			} else if (parameter == "group" || parameter == "g") {
+				// Filter by Group.
+				Node *node = get_node(p_item->get_metadata(0));
+
+				List<Node::GroupInfo> group_info_list;
+				node->get_groups(&group_info_list);
+				if (group_info_list.is_empty()) {
+					return false;
+				}
+				// When argument is empty, match all Nodes belonging to any group.
+				if (!argument.is_empty()) {
+					bool term_in_groups = false;
+					for (int j = 0; j < group_info_list.size(); j++) {
+						// Ignore private groups.
+						if (String(group_info_list[j].name).begins_with("__")) {
+							continue;
+						}
+						if (String(group_info_list[j].name).to_lower().contains(argument)) {
+							term_in_groups = true;
+							break;
+						}
+					}
+					if (!term_in_groups) {
+						return false;
+					}
+				}
+			} else {
+				WARN_PRINT(vformat(TTR("Special Node filter \"%s\" is not recognised. Available filters include \"type\" and \"group\"."), parameter));
+				continue;
+			}
+		} else {
+			// Default.
+			if (!p_item->get_text(0).to_lower().contains(term)) {
+				return false;
+			}
+		}
+	}
+
+	return true;
 }
 
 void SceneTreeEditor::_compute_hash(Node *p_node, uint64_t &hash) {
diff --git a/editor/scene_tree_editor.h b/editor/scene_tree_editor.h
index 0c13ad96cd..28ffa4b11b 100644
--- a/editor/scene_tree_editor.h
+++ b/editor/scene_tree_editor.h
@@ -78,6 +78,7 @@ class SceneTreeEditor : public Control {
 	void _test_update_tree();
 	void _update_tree(bool p_scroll_to_selected = false);
 	bool _update_filter(TreeItem *p_parent = nullptr, bool p_scroll_to_selected = false);
+	bool _item_matches_all_terms(TreeItem *p_item, PackedStringArray p_terms);
 	void _tree_changed();
 	void _tree_process_mode_changed();
 	void _node_removed(Node *p_node);
diff --git a/editor/translations/af.po b/editor/translations/af.po
index f2e389b6f5..8ada9c3379 100644
--- a/editor/translations/af.po
+++ b/editor/translations/af.po
@@ -4588,6 +4588,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7430,7 +7431,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15506,18 +15508,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nodus Naam:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nodus Naam:"
 
 #: editor/scene_tree_dock.cpp
@@ -15717,6 +15719,11 @@ msgstr ""
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nodus Naam:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Koppel tans Sein:"
 
@@ -15781,6 +15788,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17655,6 +17666,21 @@ msgstr "Alle Seleksie"
 msgid "Auto Update Project"
 msgstr "Projek Stigters"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Vervang Alles"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Kies 'n Gids"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Kies 'n Gids"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19446,6 +19472,11 @@ msgstr "Anim Dupliseer Sleutels"
 msgid "Custom BG Color"
 msgstr "Anim Dupliseer Sleutels"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Anim Verander Transform"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -20282,6 +20313,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Ongeldige naam."
diff --git a/editor/translations/ar.po b/editor/translations/ar.po
index cda76c44c8..adaef249f8 100644
--- a/editor/translations/ar.po
+++ b/editor/translations/ar.po
@@ -67,14 +67,15 @@
 # Jhon Smith <jhonsmaith3@gmail.com>, 2022.
 # Oo mohab oO <mohab9225@gmail.com>, 2022.
 # عبد الرحمن أبو سعدة ||Abd Alrahman abo saada <abdalrahmanabs2005@gmail.com>, 2022.
+# xX-Void-Xx <arandomdude75@gmail.com>, 2022.
+# أحمد النور <ahmed2699@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-23 03:57+0000\n"
-"Last-Translator: عبد الرحمن أبو سعدة ||Abd Alrahman abo saada "
-"<abdalrahmanabs2005@gmail.com>\n"
+"PO-Revision-Date: 2022-09-08 07:39+0000\n"
+"Last-Translator: أحمد النور <ahmed2699@gmail.com>\n"
 "Language-Team: Arabic <https://hosted.weblate.org/projects/godot-engine/"
 "godot/ar/>\n"
 "Language: ar\n"
@@ -83,7 +84,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 "
 "&& n%100<=10 ? 3 : n%100>=11 ? 4 : 5;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -452,9 +453,8 @@ msgid "Command"
 msgstr "مفتاح Command"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr "(فيزيائي)"
+msgstr "فيزيائي"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
@@ -508,7 +508,7 @@ msgstr "الضغط"
 
 #: core/os/input_event.cpp
 msgid "Pen Inverted"
-msgstr ""
+msgstr "قُلب القلم"
 
 #: core/os/input_event.cpp
 msgid "Relative"
@@ -1199,7 +1199,7 @@ msgstr "خطوة الدوران:"
 #: editor/animation_track_editor.cpp editor/script_editor_debugger.cpp
 #: modules/visual_script/visual_script_nodes.cpp scene/gui/range.cpp
 msgid "Value"
-msgstr "القيمة"
+msgstr "قيمة"
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
@@ -4575,6 +4575,7 @@ msgstr "أدوات مشروع أو مشهد متنوعة."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "مشروع"
 
@@ -5402,9 +5403,8 @@ msgid "Icon And Font Color"
 msgstr "لون الأيقونة والخط"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Base Color"
-msgstr "الألوان"
+msgstr "اللون الاساسي"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5434,9 +5434,8 @@ msgid "Use Graph Node Headers"
 msgstr "استخدم رؤوس وحدات الرسم البياني"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Additional Spacing"
-msgstr "تكرار الرسوم المتحركة"
+msgstr "مساحة اضافية"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5444,9 +5443,8 @@ msgid "Custom Theme"
 msgstr "مظهر المحرر/برنامج-جودوه"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Script Button"
-msgstr "زر العجلة يميناً"
+msgstr "اضهار زر السكربت"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5464,9 +5462,8 @@ msgid "Default Project Path"
 msgstr "مسار المشروع:"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "On Save"
-msgstr "حفظ"
+msgstr "عند الحفظ"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5501,9 +5498,8 @@ msgid "Start Create Dialog Fully Expanded"
 msgstr "بدء نافذة حوار الإنشاء موسعة بالكامل"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Always Show Folders"
-msgstr "إظهار الشبكة دوماً"
+msgstr "إظهار الملفات دوماً"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5567,14 +5563,12 @@ msgid "Convert Indent On Save"
 msgstr "تحويل المسافة البادئة إلى مسافات"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Draw Tabs"
-msgstr "استدعاءات الرسم:"
+msgstr "رسم فراغات زر التاب"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Draw Spaces"
-msgstr "استدعاءات الرسم:"
+msgstr "رسم فراغات زر السبايس"
 
 #: editor/editor_settings.cpp editor/plugins/spatial_editor_plugin.cpp
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/tile_map.cpp
@@ -5592,9 +5586,8 @@ msgid "V Scroll Speed"
 msgstr "سرعة التمرير العمودي"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Minimap"
-msgstr "إظهار المركز"
+msgstr "إظهار الخريطة"
 
 #: editor/editor_settings.cpp
 msgid "Minimap Width"
@@ -5618,9 +5611,8 @@ msgid "Appearance"
 msgstr "المظهر"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Show Line Numbers"
-msgstr "رقم الخط:"
+msgstr "اضهار رقم الخط"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5661,9 +5653,8 @@ msgid "Line Length Guideline Hard Column"
 msgstr "عمود غامق لتوجيه طول السطر"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
-#, fuzzy
 msgid "Script List"
-msgstr "محرر النص البرمجي"
+msgstr "لائحة السكربتات"
 
 #: editor/editor_settings.cpp
 msgid "Show Members Overview"
@@ -5725,16 +5716,14 @@ msgid "Caret Blink Speed"
 msgstr "سرعة وميض علامة الإقحام"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Right Click Moves Caret"
-msgstr "اضغط بالزر الأيمن لإضافة نقطة"
+msgstr "اضغط بالزر الأيمن لإضافة علامة الإقحام"
 
 #: editor/editor_settings.cpp modules/gdscript/gdscript.cpp
 #: modules/gdscript/gdscript_editor.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion"
-msgstr "نسخ المُحدد"
+msgstr "تكملة"
 
 #: editor/editor_settings.cpp
 msgid "Idle Parse Delay"
@@ -5793,14 +5782,12 @@ msgid "Grid Map"
 msgstr "خريطة الشبكة"
 
 #: editor/editor_settings.cpp modules/gridmap/grid_map_editor_plugin.cpp
-#, fuzzy
 msgid "Pick Distance"
-msgstr "اختر المسافة:"
+msgstr "اختر المسافة"
 
 #: editor/editor_settings.cpp editor/plugins/tile_map_editor_plugin.cpp
-#, fuzzy
 msgid "Preview Size"
-msgstr "عرض"
+msgstr "حجم العرض"
 
 #: editor/editor_settings.cpp
 msgid "Primary Grid Color"
@@ -7500,7 +7487,8 @@ msgid "8 Bit"
 msgstr "8 بت"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "احاديه"
 
@@ -15550,18 +15538,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "اجعله محلياً"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "إسم العقدة:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "لقد تم استخدام هذا الاسم في وظيفة برمجية/ مُتغيّر/ إشارة، من قبل:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "إسم العقدة:"
 
 #: editor/scene_tree_dock.cpp
@@ -15761,6 +15750,11 @@ msgid "Button Group"
 msgstr "مجموعة الأزرار"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "إسم العقدة:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(الإتصال من)"
 
@@ -15836,6 +15830,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "اسم عُقدة غير صالح، إن الأحرف التالية غير مسموحة:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "إعادة تسمية العُقدة"
 
@@ -17272,7 +17270,7 @@ msgstr ""
 #: modules/gltf/gltf_node.cpp scene/3d/spatial.cpp
 #, fuzzy
 msgid "Translation"
-msgstr "الترجمات"
+msgstr "الترجمة"
 
 #: modules/gltf/gltf_node.cpp
 #, fuzzy
@@ -17706,6 +17704,21 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "تحديث المشروع تلقائيًا"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "إظهار الكل"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "حدد الوجهة"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "حدد الوجهة"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "نهاية تتبع مكدس الاستثناء الداخلي"
@@ -19575,6 +19588,11 @@ msgstr "قص العُقد"
 msgid "Custom BG Color"
 msgstr "قص العُقد"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "توسيع الكل"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20432,6 +20450,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "اسم الرُزمة القصير غير صالح."
 
diff --git a/editor/translations/az.po b/editor/translations/az.po
index af28a85240..d4ffe0665e 100644
--- a/editor/translations/az.po
+++ b/editor/translations/az.po
@@ -4444,6 +4444,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7176,7 +7177,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14914,18 +14916,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Animasiya Addımını Dəyişdirin"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Animasiya Addımını Dəyişdirin"
 
 #: editor/scene_tree_dock.cpp
@@ -15115,6 +15117,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Animasiya Addımını Dəyişdirin"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15178,6 +15185,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16983,6 +16994,19 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "Əlaqəni redaktə edin:"
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Layihə Qurucuları"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18707,6 +18731,11 @@ msgstr "Funksiyalar:"
 msgid "Custom BG Color"
 msgstr "Funksiyalar:"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "3D Transformasya izi"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19503,6 +19532,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/bg.po b/editor/translations/bg.po
index d2d7a56dc3..46640b0b55 100644
--- a/editor/translations/bg.po
+++ b/editor/translations/bg.po
@@ -4506,6 +4506,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Проект"
 
@@ -7336,7 +7337,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15161,18 +15163,19 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Име на обекта:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Името вече е заето от друга функция/променлива/сигнал:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Име на обекта:"
 
 #: editor/scene_tree_dock.cpp
@@ -15364,6 +15367,11 @@ msgid "Button Group"
 msgstr "Група бутони"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Име на обекта:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Свързване от)"
 
@@ -15427,6 +15435,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17325,6 +17337,21 @@ msgstr "Запълване на избраното"
 msgid "Auto Update Project"
 msgstr "Редактиране на проекта"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Показване на всичко"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Изберете папка"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Изберете папка"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Край на вътрешния стек на проследяване за изключението"
@@ -19126,6 +19153,11 @@ msgstr "Персонализиран обект"
 msgid "Custom BG Color"
 msgstr "Персонализиран обект"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Задаване на отстъп"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19974,6 +20006,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Неправилно кратко име на пакет."
 
diff --git a/editor/translations/bn.po b/editor/translations/bn.po
index 6f1e8f945d..f32a090f27 100644
--- a/editor/translations/bn.po
+++ b/editor/translations/bn.po
@@ -4748,6 +4748,7 @@ msgstr "প্রকল্প অথবা দৃশ্যে-ব্যাপী
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 #, fuzzy
 msgid "Project"
 msgstr "নতুন প্রকল্প"
@@ -7789,7 +7790,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -16332,18 +16334,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "স্থানীয় করুন"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "নোডের নাম:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "নামটি ইতিমধ্যেই অপর ফাংশন/চলক(ভেরিয়েবল)/সংকেত(সিগন্যাল)-এ ব্যবহৃত হয়েছে:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "নোডের নাম:"
 
 #: editor/scene_tree_dock.cpp
@@ -16560,6 +16563,11 @@ msgstr "বোতাম ৭"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "নোডের নাম:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "সংযোগ..."
 
@@ -16640,6 +16648,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "অগ্রহণযোগ্য নোডের নাম, নীম্নোক্ত অক্ষরসমূহ গ্রহণযোগ্য নয়:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "নোড পুনঃনামকরণ করুন"
 
@@ -18644,6 +18656,21 @@ msgstr "সব সিলেক্ট করুন"
 msgid "Auto Update Project"
 msgstr "নামহীন প্রকল্প"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Normal প্রদর্শন"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "একটি স্থান পছন্দ করুন"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "একটি স্থান পছন্দ করুন"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -20545,6 +20572,11 @@ msgstr "নোড-সমূহ কর্তন/কাট করুন"
 msgid "Custom BG Color"
 msgstr "নোড-সমূহ কর্তন/কাট করুন"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "ধারক/বাহক পর্যন্ত বিস্তৃত করুন"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -21398,6 +21430,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "অগ্রহণযোগ্য ক্লাস নাম"
diff --git a/editor/translations/br.po b/editor/translations/br.po
index 823490a280..7b92059104 100644
--- a/editor/translations/br.po
+++ b/editor/translations/br.po
@@ -4371,6 +4371,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7071,7 +7072,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14762,18 +14764,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Cheñch Pazenn ar Fiñvskeudenn"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Cheñch Pazenn ar Fiñvskeudenn"
 
 #: editor/scene_tree_dock.cpp
@@ -14963,6 +14965,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Cheñch Pazenn ar Fiñvskeudenn"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15026,6 +15033,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16816,6 +16827,18 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18520,6 +18543,11 @@ msgstr "Fonksionoù :"
 msgid "Custom BG Color"
 msgstr "Fonksionoù :"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Roudenn Treuzfurmadur 3D"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19309,6 +19337,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/ca.po b/editor/translations/ca.po
index 04c9b7761c..b08b3be823 100644
--- a/editor/translations/ca.po
+++ b/editor/translations/ca.po
@@ -4569,6 +4569,7 @@ msgstr "Eines vàries o d'escena."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projecte"
 
@@ -7508,7 +7509,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15819,18 +15821,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Fer Local"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nom del node:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Nom usat en un altra funció/variable/senyal:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nom del node:"
 
 #: editor/scene_tree_dock.cpp
@@ -16034,6 +16037,11 @@ msgid "Button Group"
 msgstr "Grup de botons"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nom del node:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Connectant des de)"
 
@@ -16110,6 +16118,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "El Nom del node no és vàlid. No es permeten els caràcters següents:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Reanomena el Node"
 
@@ -18069,6 +18081,21 @@ msgstr "Omplir la Selecció"
 msgid "Auto Update Project"
 msgstr "Projecte sense nom"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Mostra-ho tot"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Tria un Directori"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Tria un Directori"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Final de la traça de la pila d'excepció interna"
@@ -19976,6 +20003,11 @@ msgstr "Talla els Nodes"
 msgid "Custom BG Color"
 msgstr "Talla els Nodes"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Expandir tot"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20832,6 +20864,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "El nom curt del paquet no és vàlid."
diff --git a/editor/translations/cs.po b/editor/translations/cs.po
index 1e92a92ae7..ed04f66e4b 100644
--- a/editor/translations/cs.po
+++ b/editor/translations/cs.po
@@ -30,13 +30,14 @@
 # Jakub Janšta <jansta.ja@gmail.com>, 2021.
 # Petr Voparil <voparil.petr96@gmail.com>, 2022.
 # JoeMoos <josephmoose13@gmail.com>, 2022.
+# Mirinek <mirek.nozicka77@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-04-08 07:29+0000\n"
-"Last-Translator: Zbyněk <zbynek.fiala@gmail.com>\n"
+"PO-Revision-Date: 2022-08-30 03:11+0000\n"
+"Last-Translator: Petr Voparil <voparil.petr96@gmail.com>\n"
 "Language-Team: Czech <https://hosted.weblate.org/projects/godot-engine/godot/"
 "cs/>\n"
 "Language: cs\n"
@@ -44,7 +45,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Weblate 4.12-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -65,7 +66,7 @@ msgstr "Kód pro ukončení (exit code)"
 #: core/bind/core_bind.cpp
 #, fuzzy
 msgid "V-Sync Enabled"
-msgstr "Povolit"
+msgstr "V-Sync Zapnutý"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "V-Sync Via Compositor"
@@ -78,7 +79,7 @@ msgstr ""
 #: core/bind/core_bind.cpp
 #, fuzzy
 msgid "Low Processor Usage Mode"
-msgstr "Režim přesouvání"
+msgstr "Režim Nízkého Využití Procesoru"
 
 #: core/bind/core_bind.cpp
 msgid "Low Processor Usage Mode Sleep (µsec)"
@@ -90,14 +91,12 @@ msgid "Keep Screen On"
 msgstr "Nechat ladící program otevřený"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Min Window Size"
-msgstr "Velikost obrysu:"
+msgstr "Minimální Velikost Okna"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Max Window Size"
-msgstr "Velikost obrysu:"
+msgstr "Maximální Velikost Okna"
 
 #: core/bind/core_bind.cpp
 #, fuzzy
@@ -116,8 +115,9 @@ msgid "Borderless"
 msgstr "Hraniční pixely"
 
 #: core/bind/core_bind.cpp
+#, fuzzy
 msgid "Per Pixel Transparency Enabled"
-msgstr ""
+msgstr "Per Pixel Průhlednost Aktivována"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp
 #, fuzzy
@@ -136,7 +136,7 @@ msgstr "Inicializovat"
 #: core/bind/core_bind.cpp core/project_settings.cpp scene/gui/dialogs.cpp
 #: scene/gui/graph_node.cpp
 msgid "Resizable"
-msgstr ""
+msgstr "Přizpůsobitelná velikost"
 
 #: core/bind/core_bind.cpp core/os/input_event.cpp scene/2d/node_2d.cpp
 #: scene/2d/physics_body_2d.cpp scene/2d/remote_transform_2d.cpp
@@ -170,7 +170,7 @@ msgstr "Editor"
 
 #: core/bind/core_bind.cpp
 msgid "Print Error Messages"
-msgstr ""
+msgstr "Vypsat chybové hlášky"
 
 #: core/bind/core_bind.cpp
 #, fuzzy
@@ -183,9 +183,8 @@ msgid "Target FPS"
 msgstr "Cíl"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Time Scale"
-msgstr "Uzel TimeScale"
+msgstr "Časová Osa"
 
 #: core/bind/core_bind.cpp main/main.cpp
 #, fuzzy
@@ -213,7 +212,7 @@ msgstr "Výsledky hledání"
 
 #: core/command_queue_mt.cpp core/message_queue.cpp main/main.cpp
 msgid "Memory"
-msgstr ""
+msgstr "Paměť"
 
 #: core/command_queue_mt.cpp core/message_queue.cpp
 #: core/register_core_types.cpp drivers/gles2/rasterizer_canvas_base_gles2.cpp
@@ -229,11 +228,11 @@ msgstr ""
 #: core/command_queue_mt.cpp
 #, fuzzy
 msgid "Command Queue"
-msgstr "Příkaz: Otočit"
+msgstr "Fronta Příkazů"
 
 #: core/command_queue_mt.cpp
 msgid "Multithreading Queue Size (KB)"
-msgstr ""
+msgstr "Velikost vícevláknové fronty (KB)"
 
 #: core/func_ref.cpp modules/visual_script/visual_script_builtin_funcs.cpp
 #: modules/visual_script/visual_script_func_nodes.cpp
@@ -263,9 +262,8 @@ msgid "Remote FS"
 msgstr "Vzdálený "
 
 #: core/io/file_access_network.cpp
-#, fuzzy
 msgid "Page Size"
-msgstr "Strana: "
+msgstr "Velikost Stránky"
 
 #: core/io/file_access_network.cpp
 msgid "Page Read Ahead"
@@ -292,11 +290,11 @@ msgstr "Kreslené objekty:"
 #: core/io/multiplayer_api.cpp core/io/packet_peer.cpp
 #, fuzzy
 msgid "Allow Object Decoding"
-msgstr "Povolit Onion Skinning"
+msgstr "Povolit Dekódování Objektu"
 
 #: core/io/multiplayer_api.cpp scene/main/scene_tree.cpp
 msgid "Refuse New Network Connections"
-msgstr ""
+msgstr "Odmítnout nová síťová připojení"
 
 #: core/io/multiplayer_api.cpp scene/main/scene_tree.cpp
 #, fuzzy
@@ -309,9 +307,8 @@ msgid "Root Node"
 msgstr "Název kořenového uzlu"
 
 #: core/io/networked_multiplayer_peer.cpp
-#, fuzzy
 msgid "Refuse New Connections"
-msgstr "Připojit"
+msgstr "Odmítnout Nová Připojení"
 
 #: core/io/networked_multiplayer_peer.cpp
 #, fuzzy
@@ -398,8 +395,9 @@ msgstr "Při volání '%s':"
 
 #: core/math/random_number_generator.cpp
 #: modules/opensimplex/open_simplex_noise.cpp
+#, fuzzy
 msgid "Seed"
-msgstr ""
+msgstr "Seed"
 
 #: core/math/random_number_generator.cpp
 #, fuzzy
@@ -412,7 +410,7 @@ msgstr ""
 
 #: core/message_queue.cpp
 msgid "Max Size (KB)"
-msgstr ""
+msgstr "Maximální Velikost (KB)"
 
 #: core/os/input.cpp
 #, fuzzy
@@ -435,8 +433,9 @@ msgid "Alt"
 msgstr "všichni"
 
 #: core/os/input_event.cpp
+#, fuzzy
 msgid "Shift"
-msgstr ""
+msgstr "Shift"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -450,7 +449,7 @@ msgstr ""
 #: core/os/input_event.cpp
 #, fuzzy
 msgid "Command"
-msgstr "Komunita"
+msgstr "Příkaz"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -462,7 +461,7 @@ msgstr "Fyzická Klávesa"
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
 msgid "Pressed"
-msgstr "Profil"
+msgstr "Stisknuté"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -475,8 +474,9 @@ msgid "Physical Scancode"
 msgstr "Fyzická Klávesa"
 
 #: core/os/input_event.cpp
+#, fuzzy
 msgid "Unicode"
-msgstr ""
+msgstr "Unicode"
 
 #: core/os/input_event.cpp
 msgid "Echo"
@@ -488,9 +488,8 @@ msgid "Button Mask"
 msgstr "Tlačítko"
 
 #: core/os/input_event.cpp scene/2d/node_2d.cpp scene/gui/control.cpp
-#, fuzzy
 msgid "Global Position"
-msgstr "Konstantní"
+msgstr "Globální Pozice"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -503,12 +502,14 @@ msgid "Button Index"
 msgstr "Index tlačítka myši:"
 
 #: core/os/input_event.cpp
+#, fuzzy
 msgid "Doubleclick"
-msgstr ""
+msgstr "Dvojklik"
 
 #: core/os/input_event.cpp
+#, fuzzy
 msgid "Tilt"
-msgstr ""
+msgstr "Sklon"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -556,11 +557,12 @@ msgstr "Akce"
 #: core/os/input_event.cpp scene/resources/environment.cpp
 #: scene/resources/material.cpp
 msgid "Strength"
-msgstr ""
+msgstr "Síla"
 
 #: core/os/input_event.cpp
+#, fuzzy
 msgid "Delta"
-msgstr ""
+msgstr "Delta"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -648,12 +650,12 @@ msgstr "Hlavní scéna"
 #: core/project_settings.cpp
 #, fuzzy
 msgid "Disable stdout"
-msgstr "Deaktivovat Autotile"
+msgstr "Deaktivovat stdout"
 
 #: core/project_settings.cpp
 #, fuzzy
 msgid "Disable stderr"
-msgstr "Deaktivovaná položka"
+msgstr "Deaktivovat stderr"
 
 #: core/project_settings.cpp
 msgid "Use Hidden Project Data Directory"
@@ -678,7 +680,7 @@ msgstr "Zobrazit všechny"
 #: modules/opensimplex/noise_texture.cpp scene/2d/line_2d.cpp
 #: scene/3d/label_3d.cpp scene/gui/text_edit.cpp scene/resources/texture.cpp
 msgid "Width"
-msgstr ""
+msgstr "Šířka"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/gltf/gltf_node.cpp modules/opensimplex/noise_texture.cpp
@@ -686,13 +688,13 @@ msgstr ""
 #: scene/resources/capsule_shape_2d.cpp scene/resources/cylinder_shape.cpp
 #: scene/resources/font.cpp scene/resources/navigation_mesh.cpp
 #: scene/resources/primitive_meshes.cpp scene/resources/texture.cpp
-#, fuzzy
 msgid "Height"
-msgstr "Světlo"
+msgstr "Výška"
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "Always On Top"
-msgstr ""
+msgstr "Vždy na hoře"
 
 #: core/project_settings.cpp
 #, fuzzy
@@ -757,7 +759,7 @@ msgstr "Přidat vstup"
 
 #: core/project_settings.cpp
 msgid "UI Accept"
-msgstr ""
+msgstr "Potvrdit"
 
 #: core/project_settings.cpp
 #, fuzzy
@@ -790,8 +792,9 @@ msgid "UI Right"
 msgstr "Vpravo nahoře"
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "UI Up"
-msgstr ""
+msgstr "Nahoře"
 
 #: core/project_settings.cpp
 #, fuzzy
@@ -836,7 +839,7 @@ msgstr "Fyzikální snímek %"
 #: scene/3d/physics_body.cpp scene/resources/world.cpp
 #: servers/physics/space_sw.cpp servers/physics_server.cpp
 msgid "3D"
-msgstr ""
+msgstr "3D"
 
 #: core/project_settings.cpp
 #, fuzzy
@@ -864,7 +867,7 @@ msgstr "Vykreslovač:"
 #: scene/resources/multimesh.cpp servers/visual/visual_server_scene.cpp
 #: servers/visual_server.cpp
 msgid "Quality"
-msgstr ""
+msgstr "Kvalita"
 
 #: core/project_settings.cpp scene/gui/file_dialog.cpp
 #: scene/main/scene_tree.cpp scene/resources/navigation_mesh.cpp
@@ -874,8 +877,9 @@ msgid "Filters"
 msgstr "Filtry:"
 
 #: core/project_settings.cpp scene/main/viewport.cpp
+#, fuzzy
 msgid "Sharpen Intensity"
-msgstr ""
+msgstr "Intenzita Zaostření"
 
 #: core/project_settings.cpp editor/editor_export.cpp editor/editor_node.cpp
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
@@ -924,8 +928,9 @@ msgid "Long Distance Matching"
 msgstr ""
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "Compression Level"
-msgstr ""
+msgstr "Úroveň Komprese"
 
 #: core/project_settings.cpp
 msgid "Window Log Size"
@@ -937,19 +942,20 @@ msgstr ""
 
 #: core/project_settings.cpp
 msgid "Gzip"
-msgstr ""
+msgstr "Gzip"
 
 #: core/project_settings.cpp platform/android/export/export.cpp
 msgid "Android"
-msgstr ""
+msgstr "Android"
 
 #: core/project_settings.cpp
 msgid "Modules"
-msgstr ""
+msgstr "Moduly"
 
 #: core/register_core_types.cpp
+#, fuzzy
 msgid "TCP"
-msgstr ""
+msgstr "TCP"
 
 #: core/register_core_types.cpp
 #, fuzzy
@@ -966,12 +972,11 @@ msgstr ""
 
 #: core/register_core_types.cpp editor/editor_settings.cpp main/main.cpp
 msgid "SSL"
-msgstr ""
+msgstr "SSL"
 
 #: core/register_core_types.cpp main/main.cpp
-#, fuzzy
 msgid "Certificates"
-msgstr "Vrcholy:"
+msgstr "Certifikáty"
 
 #: core/resource.cpp editor/dependency_editor.cpp
 #: editor/editor_resource_picker.cpp
@@ -1042,8 +1047,9 @@ msgstr "EiB"
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 #: drivers/gles3/rasterizer_storage_gles3.cpp modules/gltf/gltf_state.cpp
+#, fuzzy
 msgid "Buffers"
-msgstr ""
+msgstr "Vyrovnávací Paměti"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
@@ -1065,7 +1071,7 @@ msgstr ""
 #: servers/physics_2d/space_2d_sw.cpp servers/physics_2d_server.cpp
 #: servers/visual_server.cpp
 msgid "2D"
-msgstr ""
+msgstr "2D"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
@@ -1144,7 +1150,7 @@ msgstr ""
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp scene/resources/environment.cpp
 msgid "High Quality"
-msgstr ""
+msgstr "Vysoká Kvalita"
 
 #: drivers/gles3/rasterizer_storage_gles3.cpp
 msgid "Blend Shape Max Buffer Size (KB)"
@@ -4645,6 +4651,7 @@ msgstr "Různé nástroje pro projekt nebo scény."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -7576,7 +7583,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15659,18 +15667,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Změnit na lokální"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Název uzlu:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Jméno už je použito jinou funkcí/proměnnou/signálem:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Název uzlu:"
 
 #: editor/scene_tree_dock.cpp
@@ -15868,6 +15877,11 @@ msgid "Button Group"
 msgstr "Skupina tlačítek"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Název uzlu:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Připojování z)"
 
@@ -15943,6 +15957,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Neplatný název uzlu, následující znaky nejsou povoleny:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Přejmenovat uzel"
 
@@ -17871,6 +17889,21 @@ msgstr "Vyplnit výběr"
 msgid "Auto Update Project"
 msgstr "Nepojmenovaný projekt"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Zobrazit všechny"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Vyberte složku"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Vyberte složku"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Konec zásobníku trasování vnitřní výjimky"
@@ -19742,6 +19775,11 @@ msgstr "Vyjmout uzly"
 msgid "Custom BG Color"
 msgstr "Vyjmout uzly"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Rozbalit vše"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20596,6 +20634,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Neplatné krátké jméno balíčku."
 
diff --git a/editor/translations/da.po b/editor/translations/da.po
index 1bb05be6f9..e83ef150e4 100644
--- a/editor/translations/da.po
+++ b/editor/translations/da.po
@@ -4697,6 +4697,7 @@ msgstr "Diverse projekt eller scene redskaber."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -7636,7 +7637,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15864,18 +15866,19 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Node Navn:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Navnet allerede bruges af en anden func/var/signal:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Node Navn:"
 
 #: editor/scene_tree_dock.cpp
@@ -16083,6 +16086,11 @@ msgstr "Føj til Gruppe"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Node Navn:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Forbindelses fejl"
 
@@ -16147,6 +16155,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -18072,6 +18084,21 @@ msgstr "All selection"
 msgid "Auto Update Project"
 msgstr "Eksporter Projekt"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Vis alle"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Vælg en Mappe"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Vælg en Mappe"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19921,6 +19948,11 @@ msgstr "Indsæt Node"
 msgid "Custom BG Color"
 msgstr "Indsæt Node"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Udvid alle"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20770,6 +20802,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Ugyldigt navn."
diff --git a/editor/translations/de.po b/editor/translations/de.po
index aa92914ada..a34395385c 100644
--- a/editor/translations/de.po
+++ b/editor/translations/de.po
@@ -83,13 +83,16 @@
 # Sajeg <jfx@posteo.de>, 2022.
 # Tobias Jacobs <tobi@jacobs.rocks>, 2022.
 # JeremyStarTM <jeremystartm@tuta.io>, 2022.
+# Tim <sakul8826@gmail.com>, 2022.
+# Anonynonymouse <tom.spaine60388@gmail.com>, 2022.
+# Felix Bitsch <felix.a.bitsch@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-31 18:34+0000\n"
-"Last-Translator: JeremyStarTM <jeremystartm@tuta.io>\n"
+"PO-Revision-Date: 2022-08-30 03:11+0000\n"
+"Last-Translator: Felix Bitsch <felix.a.bitsch@gmail.com>\n"
 "Language-Team: German <https://hosted.weblate.org/projects/godot-engine/"
 "godot/de/>\n"
 "Language: de\n"
@@ -97,7 +100,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -478,7 +481,7 @@ msgstr "Gedrückt"
 
 #: core/os/input_event.cpp
 msgid "Scancode"
-msgstr "Tastencode"
+msgstr "Scancode"
 
 #: core/os/input_event.cpp
 msgid "Physical Scancode"
@@ -1633,7 +1636,7 @@ msgstr "Methodenaufrufsspurschlüssel hinzufügen"
 
 #: editor/animation_track_editor.cpp
 msgid "Method not found in object:"
-msgstr "Methode im Objekt nicht gefunden:"
+msgstr "Methode nicht im Objekt gefunden:"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Move Keys"
@@ -2815,9 +2818,8 @@ msgid "Project export for platform:"
 msgstr "Projektexport für Plattform:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "Fertiggestellt mit Fehlern."
+msgstr "Unter Warnungen fertiggestellt."
 
 #: editor/editor_export.cpp
 msgid "Completed successfully."
@@ -3501,7 +3503,7 @@ msgstr "Stile"
 
 #: editor/editor_help.cpp
 msgid "Enumerations"
-msgstr "Aufzählungstypen"
+msgstr "Aufzählungen"
 
 #: editor/editor_help.cpp
 msgid "Property Descriptions"
@@ -4564,6 +4566,7 @@ msgstr "Sonstiges Projekt oder szenenübergreifende Werkzeuge."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -5462,7 +5465,7 @@ msgstr "Vorschaubildgröße"
 
 #: editor/editor_settings.cpp
 msgid "Docks"
-msgstr "Leisten"
+msgstr "Docks"
 
 #: editor/editor_settings.cpp
 msgid "Scene Tree"
@@ -5571,7 +5574,7 @@ msgstr "Auswahl ziehen und fallen lassen"
 
 #: editor/editor_settings.cpp
 msgid "Stay In Script Editor On Node Selected"
-msgstr "Im Skript Editor bei ausgewähltem Node bleiben"
+msgstr "Im Skript-Editor bei ausgewähltem Node bleiben"
 
 #: editor/editor_settings.cpp
 msgid "Appearance"
@@ -7339,7 +7342,8 @@ msgid "8 Bit"
 msgstr "8-Bit"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Mono"
 
@@ -15359,17 +15363,20 @@ msgstr ""
 msgid "Make Local"
 msgstr "Lokal machen"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
+msgstr "Szenen-eindeutigen Namen aktivieren"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Unique names already used by another node in the scene:"
 msgstr ""
 "Ein anderes Node nutzt schon diesen einzigartigen Namen in dieser Szene."
 
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
-msgstr "Szenen-eindeutigen Namen aktivieren"
-
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Szenen-eindeutigen Namen deaktivieren"
 
 #: editor/scene_tree_dock.cpp
@@ -15569,6 +15576,10 @@ msgid "Button Group"
 msgstr "Knopf-Gruppe"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "Szenen-eindeutigen Namen deaktivieren"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Verbindung von)"
 
@@ -15648,6 +15659,11 @@ msgstr ""
 "Ungültiger Name für ein Node, die folgenden Zeichen sind nicht gestattet:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+"Ein anderes Node nutzt schon diesen einzigartigen Namen in dieser Szene."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Node umbenennen"
 
@@ -17427,6 +17443,21 @@ msgstr "Solution bauen"
 msgid "Auto Update Project"
 msgstr "Projekt automatisch aktualisieren"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Anzeigename"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Wähle ein Verzeichnis"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Wähle ein Verzeichnis"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Ende des inneren Exception-Stack-Traces"
@@ -19192,6 +19223,11 @@ msgstr "Eigene Hintergrundfarbe verwenden"
 msgid "Custom BG Color"
 msgstr "Eigene Hintergrundfarbe"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Export-Icon"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19653,8 +19689,8 @@ msgid ""
 "Could not start codesign executable, make sure Xcode command line tools are "
 "installed."
 msgstr ""
-"Codesign-Anwendung konnte nicht gestartet werden, stelle sicher dass die "
-"Xcode-Kommandozeilen-Tools installiert sind."
+"Codesign-Anwendung konnte nicht gestartet werden, bitte sicher stellen dass "
+"die Xcode-Kommandozeilen-Hilfsprogramme installiert sind."
 
 #: platform/osx/export/export.cpp platform/windows/export/export.cpp
 msgid "No identity found."
@@ -20022,6 +20058,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr "Zeige Name bei Viereck 310 X 310"
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Ungültiger Paket-Kurzname."
 
@@ -20146,21 +20188,19 @@ msgid "Could not find wine executable at \"%s\"."
 msgstr "Anwendung wine konnte nicht gefunden werden in „%s“."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid ""
 "Could not start rcedit executable. Configure rcedit path in the Editor "
 "Settings (Export > Windows > Rcedit), or disable \"Application > Modify "
 "Resources\" in the export preset."
 msgstr ""
 "Anwendung rcedit konnte nicht gestartet werden. Bitte rcedit-Pfad in "
-"Editoreinstellungen festlegen (Export > Windows > Rcedit)."
+"Editoreinstellungen festlegen (Export > Windows > Rcedit) oder die "
+"Einstellung „Application > Modify Resources“ in der Exportvorlage "
+"deaktivieren."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "rcedit failed to modify executable: %s."
-msgstr ""
-"Modifikation der Anwendung durch rcedit fehlgeschlagen:\n"
-"%s"
+msgstr "Modifikation der Anwendung durch rcedit fehlgeschlagen: %s."
 
 #: platform/windows/export/export.cpp
 msgid "Could not find signtool executable at \"%s\"."
@@ -20179,21 +20219,18 @@ msgid "Invalid timestamp server."
 msgstr "Ungültiger Zeitstempelserver."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid ""
 "Could not start signtool executable. Configure signtool path in the Editor "
 "Settings (Export > Windows > Signtool), or disable \"Codesign\" in the "
 "export preset."
 msgstr ""
 "Anwendung signtool konnte nicht gestartet werden. Bitte signtool-Pfad in "
-"Editoreinstellungen festlegen (Export > Windows > Signtool)."
+"Editoreinstellungen festlegen (Export > Windows > Signtool) oder Einstellung "
+"„Codesign“ in Exportvorlage deaktivieren."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Signtool failed to sign executable: %s."
-msgstr ""
-"Signieren der Anwendung durch Signtool ist fehlgeschlagen:\n"
-"%s"
+msgstr "Signieren der Anwendung durch Signtool ist fehlgeschlagen: %s."
 
 #: platform/windows/export/export.cpp
 msgid "Failed to remove temporary file \"%s\"."
diff --git a/editor/translations/editor.pot b/editor/translations/editor.pot
index 23c58c5ffb..fb76a2c2c7 100644
--- a/editor/translations/editor.pot
+++ b/editor/translations/editor.pot
@@ -4315,6 +4315,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -6983,7 +6984,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14642,16 +14644,16 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
+#: editor/scene_tree_dock.cpp
+msgid "Enable Scene Unique Name(s)"
 msgstr ""
 
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+msgid "Disable Scene Unique Name(s)"
 msgstr ""
 
 #: editor/scene_tree_dock.cpp
@@ -14841,6 +14843,10 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -14904,6 +14910,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16677,6 +16687,18 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18358,6 +18380,10 @@ msgstr ""
 msgid "Custom BG Color"
 msgstr ""
 
+#: platform/iphone/export/export.cpp
+msgid "Export Icons"
+msgstr ""
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19133,6 +19159,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/el.po b/editor/translations/el.po
index 4b71ed8528..3ab08f3dbd 100644
--- a/editor/translations/el.po
+++ b/editor/translations/el.po
@@ -4612,6 +4612,7 @@ msgstr "Λοιπά έργα ή εργαλεία για όλη τη σκηνή."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Έργο"
 
@@ -7583,7 +7584,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15791,18 +15793,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Κάνε τοπικό"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Όνομα κόμβου:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Το όνομα χρησιμοποιείται ήδη από μία άλλη συνάρτηση/μεταβλητή/σήμα:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Όνομα κόμβου:"
 
 #: editor/scene_tree_dock.cpp
@@ -16006,6 +16009,11 @@ msgid "Button Group"
 msgstr "Ομαδοποίηση Κουμπιών"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Όνομα κόμβου:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Πηγή Σύνδεση)"
 
@@ -16081,6 +16089,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Άκυρο όνομα κόμβου, οι ακόλουθοι χαρακτήρες δεν επιτρέπονται:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Μετονομασία κόμβου"
 
@@ -18019,6 +18031,21 @@ msgstr "Γέμισμα Επιλογής"
 msgid "Auto Update Project"
 msgstr "Ανώνυμο έργο"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Εμφάνιση όλων"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Επιλέξτε ένα λεξικό"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Επιλέξτε ένα λεξικό"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Τέλος ιχνηλάτησης στοίβας εσωτερικής εξαίρεσης"
@@ -19913,6 +19940,11 @@ msgstr "Αποκοπή κόμβων"
 msgid "Custom BG Color"
 msgstr "Αποκοπή κόμβων"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Ανάπτυξη Όλων"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20769,6 +20801,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Άκυρο σύντομο όνομα πακέτου."
 
diff --git a/editor/translations/en_Shaw.po b/editor/translations/en_Shaw.po
index 361c10ce1a..63ce9ca3d5 100644
--- a/editor/translations/en_Shaw.po
+++ b/editor/translations/en_Shaw.po
@@ -4341,6 +4341,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7028,7 +7029,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14704,18 +14706,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "𐑗𐑱𐑯𐑡 𐑨𐑯𐑦𐑥𐑱𐑖𐑩𐑯 𐑤𐑧𐑙𐑒𐑔"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "𐑗𐑱𐑯𐑡 𐑨𐑯𐑦𐑥𐑱𐑖𐑩𐑯 𐑤𐑧𐑙𐑒𐑔"
 
 #: editor/scene_tree_dock.cpp
@@ -14905,6 +14907,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "𐑗𐑱𐑯𐑡 𐑨𐑯𐑦𐑥𐑱𐑖𐑩𐑯 𐑤𐑧𐑙𐑒𐑔"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -14968,6 +14975,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16747,6 +16758,18 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18443,6 +18466,11 @@ msgstr "𐑓𐑳𐑙𐑒𐑖𐑩𐑯𐑟:"
 msgid "Custom BG Color"
 msgstr "𐑓𐑳𐑙𐑒𐑖𐑩𐑯𐑟:"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "3-𐑛 𐑑𐑮𐑨𐑯𐑕𐑓𐑹𐑥 𐑑𐑮𐑨𐑒"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19229,6 +19257,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/eo.po b/editor/translations/eo.po
index 0139382972..2bcbc62274 100644
--- a/editor/translations/eo.po
+++ b/editor/translations/eo.po
@@ -19,7 +19,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-06-03 02:51+0000\n"
+"PO-Revision-Date: 2022-08-21 06:01+0000\n"
 "Last-Translator: Kedr <lava20121991@gmail.com>\n"
 "Language-Team: Esperanto <https://hosted.weblate.org/projects/godot-engine/"
 "godot/eo/>\n"
@@ -27,12 +27,11 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
-#, fuzzy
 msgid "Tablet Driver"
-msgstr "Pelilo de tabulo"
+msgstr "Pelilo de e-tabulo"
 
 #: core/bind/core_bind.cpp
 msgid "Clipboard"
@@ -72,14 +71,12 @@ msgid "Keep Screen On"
 msgstr ""
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Min Window Size"
-msgstr "Grando de konturo:"
+msgstr "Minimuma fenestra grando"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Max Window Size"
-msgstr "Grando de konturo:"
+msgstr "Maksimuma fenestra grando"
 
 #: core/bind/core_bind.cpp
 #, fuzzy
@@ -138,9 +135,8 @@ msgstr "Pozicio de doko"
 #: scene/resources/primitive_meshes.cpp scene/resources/sky.cpp
 #: scene/resources/style_box.cpp scene/resources/texture.cpp
 #: scene/resources/visual_shader.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "Size"
-msgstr "Grando: "
+msgstr "Grando"
 
 #: core/bind/core_bind.cpp
 msgid "Endian Swap"
@@ -166,9 +162,8 @@ msgid "Target FPS"
 msgstr "Celo"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Time Scale"
-msgstr "Skalo:"
+msgstr "Skalo de tempo"
 
 #: core/bind/core_bind.cpp main/main.cpp
 #, fuzzy
@@ -180,14 +175,12 @@ msgid "Error"
 msgstr ""
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Error String"
-msgstr "Eraro dum movado de:"
+msgstr "Literĉeno de eraro"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Error Line"
-msgstr "Eraro dum movado de:"
+msgstr "Lineo de eraroj"
 
 #: core/bind/core_bind.cpp
 #, fuzzy
@@ -221,9 +214,8 @@ msgstr ""
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_nodes.cpp
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Function"
-msgstr "Funkcioj:"
+msgstr "Funkcio"
 
 #: core/image.cpp core/packed_data_container.cpp scene/2d/polygon_2d.cpp
 #: scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
@@ -240,14 +232,12 @@ msgid "Network"
 msgstr "Reta Profililo"
 
 #: core/io/file_access_network.cpp
-#, fuzzy
 msgid "Remote FS"
-msgstr "Fora "
+msgstr "Fora DS"
 
 #: core/io/file_access_network.cpp
-#, fuzzy
 msgid "Page Size"
-msgstr "Paĝo: "
+msgstr "Grando de paĝo"
 
 #: core/io/file_access_network.cpp
 msgid "Page Read Ahead"
@@ -285,9 +275,8 @@ msgid "Network Peer"
 msgstr "Reta Profililo"
 
 #: core/io/multiplayer_api.cpp scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Root Node"
-msgstr "Krei radikan nodon:"
+msgstr "Radika nodo"
 
 #: core/io/networked_multiplayer_peer.cpp
 #, fuzzy
@@ -328,9 +317,8 @@ msgid "Blocking Handshake"
 msgstr ""
 
 #: core/io/udp_server.cpp
-#, fuzzy
 msgid "Max Pending Connections"
-msgstr "Redakti Konekton:"
+msgstr "Maksimuma kvanto de atendeblaj konektoj"
 
 #: core/math/expression.cpp modules/gdscript/gdscript_functions.cpp
 #: modules/visual_script/visual_script_builtin_funcs.cpp
@@ -475,9 +463,8 @@ msgid "Factor"
 msgstr ""
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Button Index"
-msgstr "Indekso de musbutono:"
+msgstr "Indekso de butono"
 
 #: core/os/input_event.cpp
 msgid "Doubleclick"
@@ -505,9 +492,8 @@ msgstr "Kapti relative"
 #: scene/3d/cpu_particles.cpp scene/3d/interpolated_camera.cpp
 #: scene/animation/animation_player.cpp scene/resources/environment.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Speed"
-msgstr "Skalo:"
+msgstr "Rapideco"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: scene/3d/sprite_3d.cpp
@@ -520,9 +506,8 @@ msgid "Axis Value"
 msgstr "(valoro)"
 
 #: core/os/input_event.cpp modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Index"
-msgstr "Indekso:"
+msgstr "Indekso"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: modules/visual_script/visual_script_nodes.cpp
@@ -550,9 +535,8 @@ msgid "Message"
 msgstr "Ŝanĝu"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Pitch"
-msgstr "Skalo:"
+msgstr "Alteco"
 
 #: core/os/input_event.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/physics_body_2d.cpp scene/3d/cpu_particles.cpp
@@ -565,9 +549,8 @@ msgid "Instrument"
 msgstr ""
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Controller Number"
-msgstr "Lineo-Numeron:"
+msgstr "Numero de kontrolilo"
 
 #: core/os/input_event.cpp
 msgid "Controller Value"
@@ -586,9 +569,8 @@ msgid "Config"
 msgstr "Agordi kapton"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Project Settings Override"
-msgstr "Projektaj agordoj..."
+msgstr "Redifino de projekta agordoj"
 
 #: core/project_settings.cpp core/resource.cpp
 #: editor/animation_track_editor.cpp editor/editor_autoload_settings.cpp
@@ -683,9 +665,8 @@ msgid "Audio"
 msgstr "Aŭdio"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Default Bus Layout"
-msgstr "Ŝargi la defaŭlta busaranĝo."
+msgstr "Busaranĝo je defaŭlto"
 
 #: core/project_settings.cpp editor/editor_export.cpp
 #: editor/editor_file_system.cpp editor/editor_node.cpp
@@ -695,14 +676,12 @@ msgid "Editor"
 msgstr "Redaktilo"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Main Run Args"
-msgstr "Parametroj de ĉefa sceno:"
+msgstr "Bazaj parametroj de lanĉo"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Scene Naming"
-msgstr "Scena dosierindiko:"
+msgstr "Nomado de scenoj"
 
 #: core/project_settings.cpp
 msgid "Search In File Extensions"
@@ -733,9 +712,8 @@ msgid "UI Accept"
 msgstr ""
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Select"
-msgstr "Elekti"
+msgstr "UI Elekti"
 
 #: core/project_settings.cpp
 #, fuzzy
@@ -772,9 +750,8 @@ msgid "UI Down"
 msgstr "Elŝuta"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Page Up"
-msgstr "Paĝo: "
+msgstr "UI paĝon supren"
 
 #: core/project_settings.cpp
 msgid "UI Page Down"
@@ -825,9 +802,8 @@ msgstr "Krei fratan triangulo-maŝan kolizifiguron"
 #: modules/lightmapper_cpu/register_types.cpp scene/main/scene_tree.cpp
 #: scene/main/viewport.cpp servers/visual/visual_server_scene.cpp
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Rendering"
-msgstr "Bildigilo:"
+msgstr "Bildigo"
 
 #: core/project_settings.cpp drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_scene_gles3.cpp
@@ -842,9 +818,8 @@ msgstr ""
 #: core/project_settings.cpp scene/gui/file_dialog.cpp
 #: scene/main/scene_tree.cpp scene/resources/navigation_mesh.cpp
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Filters"
-msgstr "Filtriloj:"
+msgstr "Filtriloj"
 
 #: core/project_settings.cpp scene/main/viewport.cpp
 msgid "Sharpen Intensity"
@@ -925,9 +900,8 @@ msgid "TCP"
 msgstr ""
 
 #: core/register_core_types.cpp
-#, fuzzy
 msgid "Connect Timeout Seconds"
-msgstr "Konektoj al metodo:"
+msgstr "Atendtempo de konekto en sekundoj"
 
 #: core/register_core_types.cpp
 msgid "Packet Peer Stream"
@@ -1099,9 +1073,8 @@ msgstr ""
 #: scene/animation/animation_blend_tree.cpp scene/gui/control.cpp
 #: scene/main/canvas_layer.cpp scene/resources/environment.cpp
 #: scene/resources/material.cpp scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Scale"
-msgstr "Skalo:"
+msgstr "Skalo"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Follow Surface"
@@ -1150,11 +1123,11 @@ msgstr "Enmetu ŝlosilon ĉi tien"
 
 #: editor/animation_bezier_editor.cpp
 msgid "Duplicate Selected Key(s)"
-msgstr "Duplikati Elektita(j)n Ŝlosilo(j)n"
+msgstr "Duplikati elektita(j)n ŝlosilo(j)n"
 
 #: editor/animation_bezier_editor.cpp
 msgid "Delete Selected Key(s)"
-msgstr "Forigi Elektita(j)n Ŝlosilo(j)n"
+msgstr "Forigi elektita(j)n ŝlosilo(j)n"
 
 #: editor/animation_bezier_editor.cpp
 msgid "Add Bezier Point"
@@ -1215,9 +1188,8 @@ msgstr "Lokaĵigado"
 #: editor/animation_track_editor.cpp modules/gltf/gltf_node.cpp
 #: scene/2d/polygon_2d.cpp scene/2d/remote_transform_2d.cpp
 #: scene/3d/remote_transform.cpp scene/3d/spatial.cpp scene/gui/control.cpp
-#, fuzzy
 msgid "Rotation"
-msgstr "Rotacia paŝo:"
+msgstr "Rotacio"
 
 #: editor/animation_track_editor.cpp editor/script_editor_debugger.cpp
 #: modules/visual_script/visual_script_nodes.cpp scene/gui/range.cpp
@@ -1259,14 +1231,12 @@ msgid "Stream"
 msgstr ""
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Start Offset"
-msgstr "Krada deŝovo:"
+msgstr "Komenca deŝovo"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "End Offset"
-msgstr "Krada deŝovo:"
+msgstr "Fina deŝovo"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_scene.cpp
@@ -1389,14 +1359,12 @@ msgid "Remove this track."
 msgstr "Forigi ĉi tiun trakon."
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Time (s):"
-msgstr "Fojo (s): "
+msgstr "Tempo (s):"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Position:"
-msgstr "Pozicio de doko"
+msgstr "Pozicio:"
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
@@ -1418,9 +1386,8 @@ msgid "Type:"
 msgstr ""
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "(Invalid, expected type: %s)"
-msgstr "Nevalida kromprogramo."
+msgstr "(Nevalida, atendebla tipo: %s)"
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
@@ -1442,9 +1409,8 @@ msgid "Stream:"
 msgstr ""
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Start (s):"
-msgstr "Komenci"
+msgstr "Komenco (s):"
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
@@ -1669,9 +1635,8 @@ msgid "Add Method Track Key"
 msgstr "Aldoni metodan trakan ŝlosilon"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Method not found in object:"
-msgstr "Metodon ne trovis en objekto: "
+msgstr "En objekto ne estas tia metodo:"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Move Keys"
@@ -1746,11 +1711,11 @@ msgstr "Averto: Redaktanti importis animadon"
 
 #: editor/animation_track_editor.cpp
 msgid "Select an AnimationPlayer node to create and edit animations."
-msgstr "Elektu AnimationPlayer-a nodo por krei kaj redakti animadojn."
+msgstr "Elektu AnimationPlayer-nodon por krei kaj redakti animaciojn."
 
 #: editor/animation_track_editor.cpp
 msgid "Only show tracks from nodes selected in tree."
-msgstr "Nur vidigi trakojn el elektitajn nodojn en la arbo."
+msgstr "Vidigi trakojn nur el elektitajn nodojn en la arbo."
 
 #: editor/animation_track_editor.cpp
 msgid "Group tracks by node or display them as plain list."
@@ -1906,7 +1871,7 @@ msgstr "Kopii"
 
 #: editor/animation_track_editor.cpp
 msgid "Select All/None"
-msgstr "Elekti Ĉiuj/Neniuj"
+msgstr "Elekti Ĉiujn/Neniujn"
 
 #: editor/animation_track_editor_plugins.cpp
 msgid "Add Audio Track Clip"
@@ -2578,7 +2543,7 @@ msgstr "Solo"
 
 #: editor/editor_audio_buses.cpp
 msgid "Mute"
-msgstr "Mute"
+msgstr "Surdigi"
 
 #: editor/editor_audio_buses.cpp
 msgid "Bypass"
@@ -2642,9 +2607,8 @@ msgid "There is no '%s' file."
 msgstr "Estas neniu dosiero '%s'."
 
 #: editor/editor_audio_buses.cpp
-#, fuzzy
 msgid "Layout:"
-msgstr "Aranĝo"
+msgstr "Aranĝo:"
 
 #: editor/editor_audio_buses.cpp
 msgid "Invalid file, not an audio bus layout."
@@ -2818,7 +2782,7 @@ msgstr "[ne konservis]"
 
 #: editor/editor_dir_dialog.cpp
 msgid "Please select a base directory first."
-msgstr "Bonvolu selekti bazan dosierujon unue."
+msgstr "Bonvolu elektu bazan dosierujon."
 
 #: editor/editor_dir_dialog.cpp
 msgid "Choose a Directory"
@@ -2852,19 +2816,16 @@ msgid "Project export for platform:"
 msgstr ""
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "Kopii elektaron"
+msgstr "Finite kun eraroj."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed successfully."
-msgstr "Pakaĵo instalis sukcese!"
+msgstr "Finite sen eraroj."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed."
-msgstr "Eraris:"
+msgstr "Malsukcesis."
 
 #: editor/editor_export.cpp
 msgid "Storing File:"
@@ -2889,14 +2850,12 @@ msgid "Cannot create file \"%s\"."
 msgstr "Ne povis krei dosierujon."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to export project files."
-msgstr "Ne eble komencas subprocezon!"
+msgstr "Malsukcesis eksporti dosierojn de projekto."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Can't open file to read from path \"%s\"."
-msgstr "Ne malfermeblas dosieron por skribi:"
+msgstr "Ne malfermeblas dosieron por legado el vojo \"%s\"."
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -3024,9 +2983,8 @@ msgid "Custom release template not found."
 msgstr "Propra eldona ŝablono ne trovitis."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Prepare Template"
-msgstr "Ŝablono:"
+msgstr "Pretigi ŝablonon"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
 #, fuzzy
@@ -3034,9 +2992,8 @@ msgid "The given export path doesn't exist."
 msgstr "La provizinta dosierindiko ne ekzistas."
 
 #: editor/editor_export.cpp platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Template file not found: \"%s\"."
-msgstr "Ŝablonan dosieron ne trovis:"
+msgstr "Ŝablona dosiero ne troviĝas: \"%s\"."
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -3107,8 +3064,7 @@ msgid ""
 "Allows to work with signals and groups of the node selected in the Scene "
 "dock."
 msgstr ""
-"Permesas labori la signalojn kaj la grupojn de la nodo elektitas en la Sceno-"
-"doko."
+"Permesas labori kun signaloj kaj grupoj de la elektita nodo en sceno-panelo."
 
 #: editor/editor_feature_profile.cpp
 msgid "Allows to browse the local file system via a dedicated dock."
@@ -3132,7 +3088,7 @@ msgstr "(nenio)"
 
 #: editor/editor_feature_profile.cpp
 msgid "Remove currently selected profile, '%s'? Cannot be undone."
-msgstr "Forigi aktuale elektitan profilon '%s'? Ne malfareblas."
+msgstr "Forigi kurantan elektitan profilon '%s'? Ne malfareblas."
 
 #: editor/editor_feature_profile.cpp
 msgid "Profile must be a valid filename and must not contain '.'"
@@ -3266,7 +3222,7 @@ msgstr "Profilo de funkciaro de Godot"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "Select Current Folder"
-msgstr "Elekti aktualan dosierujon"
+msgstr "Elekti kurantan dosierujon"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "File exists, overwrite?"
@@ -3334,14 +3290,12 @@ msgid "Save a File"
 msgstr "Konservi dosieron"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Access"
-msgstr "Sukceso!"
+msgstr "Atingo"
 
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Display Mode"
-msgstr "Reĝimo de ludado:"
+msgstr "Reĝimo de montro"
 
 #: editor/editor_file_dialog.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -3359,19 +3313,16 @@ msgid "Mode"
 msgstr "Panoramada reĝimo"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Current Dir"
-msgstr "Aktuala profilo:"
+msgstr "Kuranta dosierujo"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Current File"
-msgstr "Aktuala profilo:"
+msgstr "Kuranta dosiero"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Current Path"
-msgstr "Aktuala profilo:"
+msgstr "Kuranta vojo"
 
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp
 #: scene/gui/file_dialog.cpp
@@ -4475,9 +4426,8 @@ msgid "Inspector"
 msgstr "Inspektoro"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Default Property Name Style"
-msgstr "Projekta vojo:"
+msgstr "Defaŭlta stilo de eca nomo"
 
 #: editor/editor_node.cpp
 msgid "Default Float Step"
@@ -4623,6 +4573,7 @@ msgstr "Diversa projekto aŭ tut-scenaj iloj."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekto"
 
@@ -4889,9 +4840,8 @@ msgid "Play Custom Scene"
 msgstr "Ludi laŭmendan scenon"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Changing the video driver requires restarting the editor."
-msgstr "Ŝanĝanto de la videa pelilo postulas rekomenci la redaktilon."
+msgstr "Por ŝanĝo de videopelilo, necesas restarto de redaktilo."
 
 #: editor/editor_node.cpp editor/project_settings_editor.cpp
 #: editor/settings_config_dialog.cpp
@@ -4941,7 +4891,7 @@ msgstr "Instali el dosiero"
 
 #: editor/editor_node.cpp
 msgid "Select android sources file"
-msgstr ""
+msgstr "Elekti Android dosieron de risurcoj"
 
 #: editor/editor_node.cpp
 msgid ""
@@ -5021,9 +4971,8 @@ msgid "Select"
 msgstr "Elekti"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Select Current"
-msgstr "Elekti aktualan dosierujon"
+msgstr "Elekti kurantan"
 
 #: editor/editor_node.cpp
 msgid "Open 2D Editor"
@@ -5091,9 +5040,8 @@ msgstr "Ĝisdatigi"
 #: editor/editor_plugin_settings.cpp platform/android/export/export_plugin.cpp
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Version"
-msgstr "Versio:"
+msgstr "Versio"
 
 #: editor/editor_plugin_settings.cpp
 #, fuzzy
@@ -5230,14 +5178,12 @@ msgstr "Elektinta nodo ne estas Viewport!"
 #: editor/editor_properties_array_dict.cpp
 #: editor/plugins/spatial_editor_plugin.cpp
 #: editor/plugins/sprite_frames_editor_plugin.cpp
-#, fuzzy
 msgid "Size:"
-msgstr "Grando: "
+msgstr "Grando"
 
 #: editor/editor_properties_array_dict.cpp
-#, fuzzy
 msgid "Page:"
-msgstr "Paĝo: "
+msgstr "Paĝo"
 
 #: editor/editor_properties_array_dict.cpp
 #: editor/plugins/theme_editor_plugin.cpp
@@ -5324,9 +5270,8 @@ msgid "Extend Script"
 msgstr "Etendi skripton"
 
 #: editor/editor_resource_picker.cpp
-#, fuzzy
 msgid "Script Owner"
-msgstr "Nomo de skripto:"
+msgstr "Posedanto de scenaro"
 
 #: editor/editor_run_native.cpp
 msgid ""
@@ -5502,14 +5447,12 @@ msgid "Directories"
 msgstr "Direktoj"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Autoscan Project Path"
-msgstr "Projekta vojo:"
+msgstr "Vojo de projektaj aŭtoskano"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Default Project Path"
-msgstr "Projekta vojo:"
+msgstr "Projekta vojo defaŭlte"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5530,9 +5473,8 @@ msgid "File Dialog"
 msgstr ""
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Thumbnail Size"
-msgstr "Bildeto..."
+msgstr "Grando de miniaturoj"
 
 #: editor/editor_settings.cpp
 msgid "Docks"
@@ -5666,14 +5608,12 @@ msgid "Appearance"
 msgstr ""
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Show Line Numbers"
-msgstr "Lineo-Numeron:"
+msgstr "Aperigi numeroj de literĉenoj"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Line Numbers Zero Padded"
-msgstr "Lineo-Numeron:"
+msgstr "Numeroj de literĉenoj kun nulaj plenigiloj"
 
 #: editor/editor_settings.cpp
 msgid "Show Bookmark Gutter"
@@ -5842,9 +5782,8 @@ msgid "Pick Distance"
 msgstr "Elektu ĉefan scenon"
 
 #: editor/editor_settings.cpp editor/plugins/tile_map_editor_plugin.cpp
-#, fuzzy
 msgid "Preview Size"
-msgstr "Antaŭrigardo:"
+msgstr "Grando de antaŭrigardo"
 
 #: editor/editor_settings.cpp
 msgid "Primary Grid Color"
@@ -5891,14 +5830,12 @@ msgid "Shape"
 msgstr ""
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Primary Grid Steps"
-msgstr "Krada paŝo:"
+msgstr "Bazaj paŝoj de krado"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Grid Size"
-msgstr "Krada paŝo:"
+msgstr "Grando de krado"
 
 #: editor/editor_settings.cpp
 msgid "Grid Division Level Max"
@@ -6073,9 +6010,8 @@ msgid "Bone Color 2"
 msgstr "Renomi nodon"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Bone Selected Color"
-msgstr "Agordi elektitan profilon:"
+msgstr "Koloro de elektita osto"
 
 #: editor/editor_settings.cpp
 msgid "Bone IK Color"
@@ -6086,9 +6022,8 @@ msgid "Bone Outline Color"
 msgstr ""
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Bone Outline Size"
-msgstr "Grando de konturo:"
+msgstr "Grando de osta konturo"
 
 #: editor/editor_settings.cpp
 msgid "Viewport Border Color"
@@ -6181,9 +6116,8 @@ msgid "Auto Save"
 msgstr "Ne konservi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Save Before Running"
-msgstr "Konservu scenon antaŭ ruloto..."
+msgstr "Konservi antaŭ lanĉo"
 
 #: editor/editor_settings.cpp
 msgid "Font Size"
@@ -6191,9 +6125,8 @@ msgstr ""
 
 #: editor/editor_settings.cpp
 #: modules/gdscript/language_server/gdscript_language_server.cpp
-#, fuzzy
 msgid "Remote Host"
-msgstr "Fora "
+msgstr "Fora retnodo"
 
 #: editor/editor_settings.cpp
 #: modules/gdscript/language_server/gdscript_language_server.cpp
@@ -6226,9 +6159,8 @@ msgstr "Mastrumilo de Projektoj"
 
 #. TRANSLATORS: Project Manager here refers to the tool used to create/manage Godot projects.
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Sorting Order"
-msgstr "Renomas dosierujon:"
+msgstr "Ordo de disspecigo"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Symbol Color"
@@ -6260,9 +6192,8 @@ msgid "Comment Color"
 msgstr ""
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "String Color"
-msgstr "Memoras dosieron:"
+msgstr "Koloro de literĉeno"
 
 #: editor/editor_settings.cpp platform/javascript/export/export.cpp
 #: platform/uwp/export/export.cpp
@@ -6298,14 +6229,12 @@ msgid "Text Color"
 msgstr "Elekti koloron"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Line Number Color"
-msgstr "Lineo-Numeron:"
+msgstr "Koloro de lineaj numeroj"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Safe Line Number Color"
-msgstr "Lineo-Numeron:"
+msgstr "Koloro de senriskaj lineaj je numeroj"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Caret Color"
@@ -6348,9 +6277,8 @@ msgid "Number Color"
 msgstr ""
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Function Color"
-msgstr "Funkcioj:"
+msgstr "Koloro de funkcio"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -6408,9 +6336,8 @@ msgid "Hide Slider"
 msgstr "Videblaj koliziaj formoj"
 
 #: editor/editor_sub_scene.cpp
-#, fuzzy
 msgid "Select Node(s) to Import"
-msgstr "Selektu nodo(j)n por enporti"
+msgstr "Elektu nodo(j)n por importado"
 
 #: editor/editor_sub_scene.cpp editor/project_manager.cpp
 msgid "Browse"
@@ -7556,7 +7483,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15556,18 +15484,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nomo de nodo:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nomo de nodo:"
 
 #: editor/scene_tree_dock.cpp
@@ -15765,6 +15693,11 @@ msgid "Button Group"
 msgstr "Grupo de butono"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nomo de nodo:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Konektas el)"
 
@@ -15840,6 +15773,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Malvalida nomo de nodo, la jenaj signoj ne permesas:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Renomi nodon"
 
@@ -17745,6 +17682,21 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "Sennoma projekto"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Vidigi tutan"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Elekti dosierujon"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Elekti dosierujon"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19572,6 +19524,11 @@ msgstr "Eltondi nodo(j)n"
 msgid "Custom BG Color"
 msgstr "Eltondi nodo(j)n"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Etendi tuton"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20419,6 +20376,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Nevalida grupa nomo."
diff --git a/editor/translations/es.po b/editor/translations/es.po
index 173b195cc4..2788483a33 100644
--- a/editor/translations/es.po
+++ b/editor/translations/es.po
@@ -85,12 +85,16 @@
 # Angel Andrade <aandradeb99@gmail.com>, 2022.
 # Juan Felipe Gómez López <juanfgomez0912@gmail.com>, 2022.
 # Pineappletooth <yochank003@gmail.com>, 2022.
+# David A. Rodas S. <woshianima@gmail.com>, 2022.
+# Fernando Joaquin Manzano Lopez <ticantin12@gmail.com>, 2022.
+# M3CG <cgmario1999@gmail.com>, 2022.
+# Chalan <Valentin06ch@outlook.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-08-05 01:04+0000\n"
+"PO-Revision-Date: 2022-09-07 21:02+0000\n"
 "Last-Translator: Javier Ocampos <xavier.ocampos@gmail.com>\n"
 "Language-Team: Spanish <https://hosted.weblate.org/projects/godot-engine/"
 "godot/es/>\n"
@@ -99,7 +103,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -478,7 +482,7 @@ msgstr "Física"
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Pressed"
-msgstr "Preset"
+msgstr "Presionado"
 
 #: core/os/input_event.cpp
 msgid "Scancode"
@@ -601,11 +605,11 @@ msgstr "Valor del Controlador"
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
 #: platform/windows/export/export.cpp
 msgid "Application"
-msgstr "Aplicação"
+msgstr "Aplicación"
 
 #: core/project_settings.cpp main/main.cpp
 msgid "Config"
-msgstr "Configuração"
+msgstr "Configuración"
 
 #: core/project_settings.cpp
 msgid "Project Settings Override"
@@ -652,11 +656,11 @@ msgstr "Desactivar stderr"
 
 #: core/project_settings.cpp
 msgid "Use Hidden Project Data Directory"
-msgstr "Utilizar el Directorio de Datos Ocultos del Proyecto"
+msgstr "Usar Directorio de Datos Ocultos del Proyecto"
 
 #: core/project_settings.cpp
 msgid "Use Custom User Dir"
-msgstr "Utilizar Directorio de Usuario Personalizado"
+msgstr "Usar Directorio de Usuario Personalizado"
 
 #: core/project_settings.cpp
 msgid "Custom User Dir Name"
@@ -702,7 +706,7 @@ msgstr "Audio"
 
 #: core/project_settings.cpp
 msgid "Default Bus Layout"
-msgstr "Layout de Bus por Defecto"
+msgstr "Layout de Bus Predeterminado"
 
 #: core/project_settings.cpp editor/editor_export.cpp
 #: editor/editor_file_system.cpp editor/editor_node.cpp
@@ -966,7 +970,7 @@ msgstr "Idioma"
 
 #: core/translation.cpp
 msgid "Test"
-msgstr "Probar"
+msgstr "Test"
 
 #: core/translation.cpp scene/resources/font.cpp
 msgid "Fallback"
@@ -1239,11 +1243,11 @@ msgstr "Stream"
 
 #: editor/animation_track_editor.cpp
 msgid "Start Offset"
-msgstr "Desplazamiento de Inicio"
+msgstr "Offset de Inicio"
 
 #: editor/animation_track_editor.cpp
 msgid "End Offset"
-msgstr "Desplazamiento Final"
+msgstr "Offset Final"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_scene.cpp
@@ -1700,12 +1704,12 @@ msgstr ""
 "Esta animación pertenece a una escena importada, por lo que los cambios en "
 "las pistas importadas no se guardarán.\n"
 "\n"
-"Para habilitar la capacidad de añadir pistas personalizadas, ve a la "
+"Para habilitar la posibilidad de añadir pistas personalizadas, ve a la "
 "configuración de importación de la escena y establece\n"
-"\"Animation > Storage\" a \"Files\", activa \"Animation > Keep Custom "
-"Tracks\", y luego reimporta.\n"
-"También puedes usar un preset de importación que importa animaciones para "
-"separar archivos."
+"\"Animación > Almacenamiento\" a \"Archivos\", active \"Animación > Mantener "
+"Pistas Personalizadas\", y vuelve a importar.\n"
+"Como alternativa, utiliza un preset de importación que importe las "
+"animaciones a archivos separados."
 
 #: editor/animation_track_editor.cpp
 msgid "Warning: Editing imported animation"
@@ -1791,7 +1795,7 @@ msgstr "Ir al Paso Anterior"
 
 #: editor/animation_track_editor.cpp
 msgid "Apply Reset"
-msgstr "Aplicar Restablecer"
+msgstr "Aplicar Reset"
 
 #: editor/animation_track_editor.cpp
 msgid "Optimize Animation"
@@ -2649,11 +2653,11 @@ msgstr "Guardar este Bus Layout a un archivo."
 
 #: editor/editor_audio_buses.cpp editor/import_dock.cpp
 msgid "Load Default"
-msgstr "Cargar Valores por Defecto"
+msgstr "Cargar Valores Predeterminados"
 
 #: editor/editor_audio_buses.cpp
 msgid "Load the default Bus Layout."
-msgstr "Cargar el Bus Layout predeterminado."
+msgstr "Cargue el Layout del Bus predeterminado."
 
 #: editor/editor_audio_buses.cpp
 msgid "Create a new Bus Layout."
@@ -2689,7 +2693,7 @@ msgstr "No debe coincidir con una constante global existente."
 
 #: editor/editor_autoload_settings.cpp
 msgid "Keyword cannot be used as an autoload name."
-msgstr "La palabra clave no se puede utilizar como nombre de autoload."
+msgstr "La palabra clave no se puede usar como nombre de autoload."
 
 #: editor/editor_autoload_settings.cpp
 msgid "Autoload '%s' already exists!"
@@ -2817,9 +2821,8 @@ msgid "Project export for platform:"
 msgstr "Exportar proyecto para la plataforma:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "Completado con errores."
+msgstr "Completado con advertencias."
 
 #: editor/editor_export.cpp
 msgid "Completed successfully."
@@ -3150,7 +3153,7 @@ msgstr "Error al guardar el perfil en la ruta: '%s'."
 
 #: editor/editor_feature_profile.cpp
 msgid "Reset to Default"
-msgstr "Restablecer Valores por Defecto"
+msgstr "Restablecer Valores Predeterminados"
 
 #: editor/editor_feature_profile.cpp
 msgid "Current Profile:"
@@ -3221,7 +3224,7 @@ msgstr "Administrar Perfiles de Características del Editor"
 
 #: editor/editor_feature_profile.cpp
 msgid "Default Feature Profile"
-msgstr "Perfil de Características por Defecto"
+msgstr "Perfil de Características Predeterminado"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "Select Current Folder"
@@ -3920,9 +3923,9 @@ msgid ""
 "To restore the Default layout to its base settings, use the Delete Layout "
 "option and delete the Default layout."
 msgstr ""
-"Layout por defecto del editor sobreescrita.\n"
-"Para recuperar el layout por defecto, utiliza la opción Eliminar Layout y "
-"borra el Layout por defecto."
+"Layout por defecto del editor anulado.\n"
+"Para recuperar el layout predeterminado, utiliza la opción Eliminar Layout y "
+"borra el layout Predeterminado."
 
 #: editor/editor_node.cpp
 msgid "Layout name not found!"
@@ -3930,7 +3933,7 @@ msgstr "¡Nombre de layout no encontrado!"
 
 #: editor/editor_node.cpp
 msgid "Restored the Default layout to its base settings."
-msgstr "Se restauró el diseño por defecto a su configuración básica."
+msgstr "Se restauró el diseño predeterminado a su configuración básica."
 
 #: editor/editor_node.cpp
 msgid ""
@@ -4282,7 +4285,7 @@ msgstr "Eliminar Layout"
 #: editor/editor_node.cpp editor/import_dock.cpp
 #: editor/script_create_dialog.cpp
 msgid "Default"
-msgstr "Por defecto"
+msgstr "Predeterminado"
 
 #: editor/editor_node.cpp editor/editor_resource_picker.cpp
 #: editor/plugins/script_editor_plugin.cpp editor/property_editor.cpp
@@ -4415,11 +4418,11 @@ msgstr "Inspector"
 
 #: editor/editor_node.cpp
 msgid "Default Property Name Style"
-msgstr "Estilo por Defecto del Nombrado de Propiedades"
+msgstr "Estilo del nombre de la Propiedad Predeterminada"
 
 #: editor/editor_node.cpp
 msgid "Default Float Step"
-msgstr "Escalonado de Flotantes por Defecto"
+msgstr "Escalonado de Flotantes Predeterminado"
 
 #: editor/editor_node.cpp scene/gui/tree.cpp
 msgid "Disable Folding"
@@ -4447,7 +4450,7 @@ msgstr "Recursos Para Abrir En Nuevo Inspector"
 
 #: editor/editor_node.cpp
 msgid "Default Color Picker Mode"
-msgstr "Modo De Selección De Color Por Defecto"
+msgstr "Modo de Selección de Color Predeterminado"
 
 #: editor/editor_node.cpp editor/plugins/version_control_editor_plugin.cpp
 msgid "Version Control"
@@ -4557,6 +4560,7 @@ msgstr "Herramientas variadas de proyecto o escena."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Proyecto"
 
@@ -4617,8 +4621,8 @@ msgstr ""
 "Cuando esta opción está activada, al utilizar el despliegue con un clic, el "
 "ejecutable intentará conectarse a la IP de este equipo para que el proyecto "
 "en ejecución pueda ser depurado.\n"
-"Esta opción está pensada para ser usada en la depuración remota "
-"( normalmente con un dispositivo móvil).\n"
+"Esta opción está pensada para ser usada en la depuración remota (normalmente "
+"con un dispositivo móvil).\n"
 "No es necesario habilitarla para usar el depurador GDScript localmente."
 
 #: editor/editor_node.cpp
@@ -5435,7 +5439,7 @@ msgstr "Autoescaneo de la Ruta del Proyecto"
 
 #: editor/editor_settings.cpp
 msgid "Default Project Path"
-msgstr "Ruta del Proyecto por Defecto"
+msgstr "Ruta del Proyecto Predeterminada"
 
 #: editor/editor_settings.cpp
 msgid "On Save"
@@ -5702,7 +5706,7 @@ msgstr "Colocar Tooltip de Llamada Debajo de la Línea Actual"
 
 #: editor/editor_settings.cpp
 msgid "Callhint Tooltip Offset"
-msgstr "Desplazamiento del Tooltip de Llamada"
+msgstr "Offset del Tooltip de Llamada"
 
 #: editor/editor_settings.cpp
 msgid "Complete File Paths"
@@ -5714,7 +5718,7 @@ msgstr "Añadir Sugerencias de Tipo"
 
 #: editor/editor_settings.cpp
 msgid "Use Single Quotes"
-msgstr "Utilizar Comillas Simples"
+msgstr "Usar Comillas Simples"
 
 #: editor/editor_settings.cpp
 msgid "Show Help Index"
@@ -5818,19 +5822,19 @@ msgstr "Cuadrícula Plano YZ"
 
 #: editor/editor_settings.cpp
 msgid "Default FOV"
-msgstr "Campo de Visión por Defecto"
+msgstr "FOV Predeterminado"
 
 #: editor/editor_settings.cpp
 msgid "Default Z Near"
-msgstr "Z Cercana por Defecto"
+msgstr "Z Cercano Predeterminado"
 
 #: editor/editor_settings.cpp
 msgid "Default Z Far"
-msgstr "Z Lejana por Defecto"
+msgstr "Z Lejano Predeterminado"
 
 #: editor/editor_settings.cpp
 msgid "Lightmap Baking Number Of CPU Threads"
-msgstr "Número de hilos de la CPU para el Lightmap Baking"
+msgstr "Número de Hilos de la CPU para el Lightmap Baking"
 
 #: editor/editor_settings.cpp
 msgid "Navigation Scheme"
@@ -6002,7 +6006,7 @@ msgstr "Crear Pistas Bézier Predeterminadas"
 
 #: editor/editor_settings.cpp
 msgid "Default Create Reset Tracks"
-msgstr "Crear Pistas de Reinicio por Defecto"
+msgstr "Crear Pistas de Reinicio Predeterminado"
 
 #: editor/editor_settings.cpp
 msgid "Onion Layers Past Color"
@@ -6118,7 +6122,7 @@ msgstr "Color de los Comentarios"
 
 #: editor/editor_settings.cpp
 msgid "String Color"
-msgstr "Color de Cadena"
+msgstr "Color del String"
 
 #: editor/editor_settings.cpp platform/javascript/export/export.cpp
 #: platform/uwp/export/export.cpp
@@ -6176,7 +6180,7 @@ msgstr "Color de Selección"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Brace Mismatch Color"
-msgstr ""
+msgstr "Color de Corchetes Incompletos"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Current Line Color"
@@ -6184,7 +6188,7 @@ msgstr "Color de Línea Actual"
 
 #: editor/editor_settings.cpp
 msgid "Line Length Guideline Color"
-msgstr ""
+msgstr "Color de Guía de la Línea de Longitud"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Word Highlighted Color"
@@ -6192,11 +6196,11 @@ msgstr "Color de la Palabra Resaltada"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Number Color"
-msgstr "Número del Color"
+msgstr "Color del Número"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Function Color"
-msgstr "Función Color"
+msgstr "Color de la Función"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Member Variable Color"
@@ -6212,15 +6216,15 @@ msgstr "Color del Marcador"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Breakpoint Color"
-msgstr "Puntos de Interrupción"
+msgstr "Color de Puntos de Interrupción"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Executing Line Color"
-msgstr "Color de la línea de ejecución"
+msgstr "Color de la línea en ejecución"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Code Folding Color"
-msgstr ""
+msgstr "Color del Código Plegado"
 
 #: editor/editor_settings.cpp
 msgid "Search Result Color"
@@ -6246,7 +6250,7 @@ msgstr "Ocultar Deslizador"
 
 #: editor/editor_sub_scene.cpp
 msgid "Select Node(s) to Import"
-msgstr "Selecciona nodo(s) a importar"
+msgstr "Seleccione nodo(s) a importar"
 
 #: editor/editor_sub_scene.cpp editor/project_manager.cpp
 msgid "Browse"
@@ -6279,7 +6283,7 @@ msgstr "No hay espejos disponibles."
 
 #: editor/export_template_manager.cpp
 msgid "Retrieving the mirror list..."
-msgstr "Recuperar la lista de espejos..."
+msgstr "Recuperar el listado de mirrors..."
 
 #: editor/export_template_manager.cpp
 msgid "Starting the download..."
@@ -6291,7 +6295,7 @@ msgstr "Error al solicitar la URL:"
 
 #: editor/export_template_manager.cpp
 msgid "Connecting to the mirror..."
-msgstr "Conectando con el espejo..."
+msgstr "Conectando con el mirror..."
 
 #: editor/export_template_manager.cpp
 msgid "Can't resolve the requested address."
@@ -6299,11 +6303,11 @@ msgstr "No se puede resolver la dirección solicitada."
 
 #: editor/export_template_manager.cpp
 msgid "Can't connect to the mirror."
-msgstr "No se puede conectar al espejo."
+msgstr "No se puede conectar con el mirror."
 
 #: editor/export_template_manager.cpp
 msgid "No response from the mirror."
-msgstr "No hay respuesta del espejo."
+msgstr "No hay respuesta del mirror."
 
 #: editor/export_template_manager.cpp
 #: editor/plugins/asset_library_editor_plugin.cpp
@@ -6320,7 +6324,7 @@ msgstr "Petición fallida:"
 
 #: editor/export_template_manager.cpp
 msgid "Download complete; extracting templates..."
-msgstr "Descarga completa; extracción de plantillas..."
+msgstr "Descarga completa; extrayendo plantillas..."
 
 #: editor/export_template_manager.cpp
 msgid "Cannot remove temporary file:"
@@ -6336,17 +6340,17 @@ msgstr ""
 
 #: editor/export_template_manager.cpp
 msgid "Error getting the list of mirrors."
-msgstr "Error al obtener la lista de espejos."
+msgstr "Error al obtener el listado de mirrors."
 
 #: editor/export_template_manager.cpp
 msgid "Error parsing JSON with the list of mirrors. Please report this issue!"
 msgstr ""
-"Error al analizar el JSON con la lista de espejos ¡Por favor, reporta este "
+"Error al leer el JSON con la lista de mirrors ¡Por favor, informa de este "
 "problema!"
 
 #: editor/export_template_manager.cpp
 msgid "Best available mirror"
-msgstr "El mejor espejo disponible"
+msgstr "Mejor mirror disponible"
 
 #: editor/export_template_manager.cpp
 msgid ""
@@ -6540,7 +6544,7 @@ msgstr ""
 
 #: editor/fileserver/editor_file_server.cpp
 msgid "File Server"
-msgstr ""
+msgstr "Servidor de Archivos"
 
 #: editor/fileserver/editor_file_server.cpp
 #: editor/plugins/version_control_editor_plugin.cpp
@@ -6913,11 +6917,11 @@ msgstr "Administrar Grupos"
 
 #: editor/import/editor_import_collada.cpp
 msgid "Collada"
-msgstr ""
+msgstr "Collada"
 
 #: editor/import/editor_import_collada.cpp
 msgid "Use Ambient"
-msgstr ""
+msgstr "Usar Ambiente"
 
 #: editor/import/resource_importer_bitmask.cpp
 msgid "Create From"
@@ -6926,7 +6930,7 @@ msgstr "Crear Desde"
 #: editor/import/resource_importer_bitmask.cpp
 #: servers/audio/effects/audio_effect_compressor.cpp
 msgid "Threshold"
-msgstr ""
+msgstr "Umbral"
 
 #: editor/import/resource_importer_csv_translation.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -7011,7 +7015,7 @@ msgstr "Escalar Mesh"
 
 #: editor/import/resource_importer_obj.cpp
 msgid "Offset Mesh"
-msgstr "Offset de Malla"
+msgstr "Offset de Mesh"
 
 #: editor/import/resource_importer_obj.cpp
 #: editor/import/resource_importer_scene.cpp
@@ -7089,7 +7093,7 @@ msgstr "Almacenamiento"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Use Legacy Names"
-msgstr ""
+msgstr "Usar Nombres Heredados"
 
 #: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
 msgid "Materials"
@@ -7117,7 +7121,7 @@ msgstr "Tamaño Lightmap Texel"
 
 #: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
 msgid "Skins"
-msgstr ""
+msgstr "Skins"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Use Named Skins"
@@ -7129,7 +7133,7 @@ msgstr "Archivos Externos"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Store In Subdir"
-msgstr ""
+msgstr "Guardar en el Subdirectorio"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Filter Script"
@@ -7231,16 +7235,21 @@ msgid ""
 "%s: Texture detected as used as a normal map in 3D. Enabling red-green "
 "texture compression to reduce memory usage (blue channel is discarded)."
 msgstr ""
+"%s: Textura detectada siendo usada como mapa de normales en 3D. Activando la "
+"compresión de la textura rojo-verde para reducir el uso de memoria (el canal "
+"azul se descarta)."
 
 #: editor/import/resource_importer_texture.cpp
 msgid ""
 "%s: Texture detected as used in 3D. Enabling filter, repeat, mipmap "
 "generation and VRAM texture compression."
 msgstr ""
+"%s: Textura detectada siendo usada en 3D. Activando el filtro, la "
+"repetición, la generación de mipmaps y la compresión de textura VRAM."
 
 #: editor/import/resource_importer_texture.cpp
 msgid "2D, Detect 3D"
-msgstr ""
+msgstr "2D, Detectar 3D"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "2D Pixel"
@@ -7248,7 +7257,7 @@ msgstr "Pixel 2D"
 
 #: editor/import/resource_importer_texture.cpp scene/resources/texture.cpp
 msgid "Lossy Quality"
-msgstr ""
+msgstr "Con Pérdidas de Calidad"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "HDR Mode"
@@ -7256,14 +7265,14 @@ msgstr "Modo HDR"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "BPTC LDR"
-msgstr ""
+msgstr "BPTC LDR"
 
 #: editor/import/resource_importer_texture.cpp
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/mesh_instance_2d.cpp scene/2d/multimesh_instance_2d.cpp
 #: scene/2d/particles_2d.cpp scene/2d/sprite.cpp scene/resources/style_box.cpp
 msgid "Normal Map"
-msgstr ""
+msgstr "Mapa de Normales"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "Process"
@@ -7271,7 +7280,7 @@ msgstr "Proceso"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "Fix Alpha Border"
-msgstr ""
+msgstr "Corregir Borde Alfa"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "Premult Alpha"
@@ -7279,7 +7288,7 @@ msgstr "Premult Alpha"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "Hdr As Srgb"
-msgstr ""
+msgstr "Hdr como Srgb"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "Invert Color"
@@ -7295,7 +7304,7 @@ msgstr "Tamaño Límite"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "Detect 3D"
-msgstr ""
+msgstr "Detectar 3D"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "SVG"
@@ -7306,6 +7315,9 @@ msgid ""
 "Warning, no suitable PC VRAM compression enabled in Project Settings. This "
 "texture will not display correctly on PC."
 msgstr ""
+"Advertencia, no se ha activado la compresión VRAM para PC en la "
+"configuración del proyecto. Esta textura no se mostrará correctamente en el "
+"PC."
 
 #: editor/import/resource_importer_texture_atlas.cpp
 msgid "Atlas File"
@@ -7321,7 +7333,7 @@ msgstr "Recortar la Región"
 
 #: editor/import/resource_importer_texture_atlas.cpp
 msgid "Trim Alpha Border From Region"
-msgstr ""
+msgstr "Recortar Borde Alfa de la Región"
 
 #: editor/import/resource_importer_wav.cpp scene/2d/physics_body_2d.cpp
 msgid "Force"
@@ -7329,12 +7341,13 @@ msgstr "Fuerza"
 
 #: editor/import/resource_importer_wav.cpp
 msgid "8 Bit"
-msgstr ""
+msgstr "8 Bit"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
-msgstr ""
+msgstr "Mono"
 
 #: editor/import/resource_importer_wav.cpp
 msgid "Max Rate"
@@ -7346,7 +7359,7 @@ msgstr "Tasa Máxima Hz"
 
 #: editor/import/resource_importer_wav.cpp
 msgid "Trim"
-msgstr ""
+msgstr "Recorte"
 
 #: editor/import/resource_importer_wav.cpp
 msgid "Normalize"
@@ -7377,7 +7390,7 @@ msgstr "Importador:"
 
 #: editor/import_defaults_editor.cpp
 msgid "Reset to Defaults"
-msgstr "Restablecer Valores por Defecto"
+msgstr "Restablecer Valores Predeterminados"
 
 #: editor/import_dock.cpp
 msgid "Keep File (No Import)"
@@ -7393,7 +7406,7 @@ msgstr "Establecer como predeterminado para '%s'"
 
 #: editor/import_dock.cpp
 msgid "Clear Default for '%s'"
-msgstr "Restablecer Predeterminado para '%s'"
+msgstr "Eliminar los Valores Predeterminados para '%s'"
 
 #: editor/import_dock.cpp
 msgid "Reimport"
@@ -7461,7 +7474,7 @@ msgstr "Localizado"
 
 #: editor/inspector_dock.cpp
 msgid "Localization not available for current language."
-msgstr ""
+msgstr "La traducción no está disponible para el idioma actual."
 
 #: editor/inspector_dock.cpp
 msgid "Copy Properties"
@@ -8341,7 +8354,7 @@ msgstr "Filtros..."
 
 #: editor/plugins/asset_library_editor_plugin.cpp scene/main/http_request.cpp
 msgid "Use Threads"
-msgstr ""
+msgstr "Usar Hilos"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
 msgid "Contents:"
@@ -8569,7 +8582,7 @@ msgstr "Prueba"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
 msgid "Failed to get repository configuration."
-msgstr ""
+msgstr "Fallo en la obtención de la configuración del repositorio."
 
 #: editor/plugins/asset_library_editor_plugin.cpp
 msgid "Assets ZIP File"
@@ -8599,8 +8612,8 @@ msgstr ""
 #: editor/plugins/baked_lightmap_editor_plugin.cpp
 msgid "Failed creating lightmap images, make sure path is writable."
 msgstr ""
-"Error al crear las imágenes del \"lighmap\", asegúrate de que se puede "
-"escribir en la ruta."
+"Error al crear las imágenes del lightmap, asegúrate de que se puede escribir "
+"en la ruta."
 
 #: editor/plugins/baked_lightmap_editor_plugin.cpp
 msgid "Failed determining lightmap size. Maximum lightmap size too small?"
@@ -8646,7 +8659,7 @@ msgstr "Configurar Snap"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid "Grid Offset:"
-msgstr "Desplazamiento de Cuadrícula:"
+msgstr "Offset de Cuadrícula:"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid "Grid Step:"
@@ -8702,7 +8715,7 @@ msgstr "Crear Guías Horizontales y Verticales"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid "Set CanvasItem \"%s\" Pivot Offset to (%d, %d)"
-msgstr "Ajusta el Offset del pivote del CanvasItem \"%s\" a (%d, %d)"
+msgstr "Fija el Offset del pivote del CanvasItem \"%s\" a (%d, %d)"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid "Rotate %d CanvasItems"
@@ -9326,7 +9339,7 @@ msgstr "Error al instanciar escena desde %s"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid "Change Default Type"
-msgstr "Cambiar Tipo por Defecto"
+msgstr "Cambiar Tipo Predeterminado"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid ""
@@ -9502,11 +9515,11 @@ msgstr "Degradado Editado"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
 msgid "Swap GradientTexture2D Fill Points"
-msgstr ""
+msgstr "Intercambiar Puntos de Relleno de GradientTexture2D"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
 msgid "Swap Gradient Fill Points"
-msgstr ""
+msgstr "Intercambiar Puntos de Relleno de Degradado"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
 msgid "Toggle Grid Snap"
@@ -9529,7 +9542,7 @@ msgstr "Icono"
 
 #: editor/plugins/item_list_editor_plugin.cpp
 msgid "ID"
-msgstr ""
+msgstr "ID"
 
 #: editor/plugins/item_list_editor_plugin.cpp
 #: scene/resources/default_theme/default_theme.cpp
@@ -10312,11 +10325,11 @@ msgstr "Configurar Cuadrícula:"
 
 #: editor/plugins/polygon_2d_editor_plugin.cpp
 msgid "Grid Offset X:"
-msgstr "Desplazamiento de Cuadrícula en X:"
+msgstr "Offset de Cuadrícula en X:"
 
 #: editor/plugins/polygon_2d_editor_plugin.cpp
 msgid "Grid Offset Y:"
-msgstr "Desplazamiento de Cuadrícula en Y:"
+msgstr "Offset de Cuadrícula en Y:"
 
 #: editor/plugins/polygon_2d_editor_plugin.cpp
 msgid "Grid Step X:"
@@ -10332,7 +10345,7 @@ msgstr "Sincronizar Huesos con el Polígono"
 
 #: editor/plugins/ray_cast_2d_editor_plugin.cpp
 msgid "Set cast_to"
-msgstr ""
+msgstr "Establecer cast_to"
 
 #: editor/plugins/resource_preloader_editor_plugin.cpp
 msgid "ERROR: Couldn't load resource!"
@@ -10663,11 +10676,11 @@ msgstr "Resultados de la Búsqueda"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Open Dominant Script On Scene Change"
-msgstr ""
+msgstr "Abrir el Script Principal en el Cambio de Escena"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "External"
-msgstr ""
+msgstr "Externo"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Use External Editor"
@@ -10683,11 +10696,11 @@ msgstr "Temperatura del Script Activada"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Highlight Current Script"
-msgstr ""
+msgstr "Resaltar Script Actual"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Script Temperature History Size"
-msgstr ""
+msgstr "Tamaño de Historial de Temperatura del Script"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Current Script Background Color"
@@ -10707,7 +10720,7 @@ msgstr "Lista de Nombres de Script Como"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Exec Flags"
-msgstr ""
+msgstr "Indicadores de Ejecución"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Clear Recent Scripts"
@@ -11284,7 +11297,7 @@ msgid ""
 "It cannot be used as a reliable indication of in-game performance."
 msgstr ""
 "Nota: El valor FPS que se muestra es la velocidad de fotogramas del editor.\n"
-"No se puede utilizar como un indicador fiable del rendimiento en el juego."
+"No se puede usar como un indicador fiable del rendimiento en el juego."
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Convert Rooms"
@@ -11403,7 +11416,7 @@ msgstr "Incrementar el Campo de Visión"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Reset Field of View to Default"
-msgstr "Restablecer el Campo de Visión por Defecto"
+msgstr "Restablecer el Campo de Visión Predeterminado"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Snap Object to Floor"
@@ -11524,11 +11537,11 @@ msgstr "Posterior"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Manipulator Gizmo Size"
-msgstr ""
+msgstr "Tamaño del Gizmo Manipulador"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Manipulator Gizmo Opacity"
-msgstr ""
+msgstr "Opacidad del Gizmo Manipulador"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Show Viewport Rotation Gizmo"
@@ -12220,13 +12233,13 @@ msgstr "Establer tipo de base"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Show Default"
-msgstr "Mostrar Por Defecto"
+msgstr "Mostrar por Defecto"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Show default type items alongside items that have been overridden."
 msgstr ""
-"Mostrar los elementos de tipo por defecto junto a los elementos que han sido "
-"anulados."
+"Mostrar los elementos de tipo predeterminado junto a los elementos que han "
+"sido anulados."
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Override All"
@@ -12234,7 +12247,7 @@ msgstr "Anular Todo"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Override all default type items."
-msgstr "Anular todos los elementos de tipo por defecto."
+msgstr "Anular todos los elementos de tipo predeterminado."
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Select the variation base type from a list of available types."
@@ -12268,7 +12281,7 @@ msgstr "Añadir Vista Previa"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Default Preview"
-msgstr "Vista Previa Por Defecto"
+msgstr "Vista Previa Predeterminada"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Select UI Scene:"
@@ -12877,7 +12890,7 @@ msgstr "Opciones de Ajuste"
 #: scene/main/canvas_layer.cpp scene/resources/material.cpp
 #: scene/resources/particles_material.cpp scene/resources/style_box.cpp
 msgid "Offset"
-msgstr "Desplazamiento"
+msgstr "Offset"
 
 #: editor/plugins/tile_set_editor_plugin.cpp editor/rename_dialog.cpp
 #: scene/gui/range.cpp scene/resources/animation.cpp
@@ -12907,7 +12920,7 @@ msgstr "Textura"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Tex Offset"
-msgstr "Desplazamiento de Textura"
+msgstr "Offset de Textura"
 
 #: editor/plugins/tile_set_editor_plugin.cpp modules/csg/csg_shape.cpp
 #: scene/2d/canvas_item.cpp scene/2d/particles_2d.cpp
@@ -12938,15 +12951,15 @@ msgstr "Espaciado de Subtile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Occluder Offset"
-msgstr "Desplazamiento del Oclusor"
+msgstr "Offset del Oclusor"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Navigation Offset"
-msgstr "Desplazamiento de Navegación"
+msgstr "Offset de Navegación"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Shape Offset"
-msgstr "Desplazamiento del Shape"
+msgstr "Offset del Shape"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Shape Transform"
@@ -14066,11 +14079,13 @@ msgstr "Ejecutable"
 
 #: editor/project_export.cpp
 msgid "Export the project for all the presets defined."
-msgstr ""
+msgstr "Exportar el proyecto para todos los presets definidos."
 
 #: editor/project_export.cpp
 msgid "All presets must have an export path defined for Export All to work."
 msgstr ""
+"Todos los presets deben tener una ruta de exportación definida para que "
+"Exportar Todo funcione."
 
 #: editor/project_export.cpp
 msgid "Delete preset '%s'?"
@@ -14183,6 +14198,8 @@ msgid ""
 "Note: Encryption key needs to be stored in the binary,\n"
 "you need to build the export templates from source."
 msgstr ""
+"Nota: La clave de encriptación debe ser almacenada en el binario,\n"
+"es necesario construir las plantillas de exportación desde el código fuente."
 
 #: editor/project_export.cpp
 msgid "More Info..."
@@ -14944,7 +14961,7 @@ msgstr "Plugins"
 
 #: editor/project_settings_editor.cpp
 msgid "Import Defaults"
-msgstr "Valores de Importación por Defecto"
+msgstr "Valores de Importación Predeterminados"
 
 #: editor/property_editor.cpp
 msgid "Preset..."
@@ -15323,8 +15340,8 @@ msgid ""
 "Disabling \"editable_instance\" will cause all properties of the node to be "
 "reverted to their default."
 msgstr ""
-"Desactivar \"editable_instance\" causara que todas las propiedades del nodo "
-"vuelvan a sus valores por defecto."
+"Desactivar \"editable_instance\" causará que todas las propiedades del nodo "
+"vuelvan a sus valores predeterminados."
 
 #: editor/scene_tree_dock.cpp
 msgid ""
@@ -15332,23 +15349,26 @@ msgid ""
 "cause all properties of the node to be reverted to their default."
 msgstr ""
 "Activar \"Cargar Como Placeholder\" desactivará \"Hijos Editables\" y "
-"causará que todas las propiedades del nodo se reviertan a sus valores por "
-"defecto."
+"causará que todas las propiedades del nodo se reviertan a sus valores "
+"predeterminados."
 
 #: editor/scene_tree_dock.cpp
 msgid "Make Local"
 msgstr "Crear Local"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
 msgstr "Activar Nombre Único de Escena"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Unique names already used by another node in the scene:"
+msgstr "Otro nodo ya utiliza este nombre único en la escena."
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Desactivar Nombre Único de Escena"
 
 #: editor/scene_tree_dock.cpp
@@ -15425,7 +15445,7 @@ msgstr "Sub-Recursos"
 
 #: editor/scene_tree_dock.cpp
 msgid "Access as Scene Unique Name"
-msgstr ""
+msgstr "Acceso como Nombre Único de Escena"
 
 #: editor/scene_tree_dock.cpp
 msgid "Clear Inheritance"
@@ -15529,7 +15549,7 @@ msgstr "Mostrar Selección de la Raíz del Árbol de Escenas"
 
 #: editor/scene_tree_dock.cpp
 msgid "Derive Script Globals By Name"
-msgstr ""
+msgstr "Derivar Script Globales por Nombre"
 
 #: editor/scene_tree_dock.cpp
 msgid "Use Favorites Root Selection"
@@ -15548,6 +15568,10 @@ msgid "Button Group"
 msgstr "Grupo de Botones"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "Desactivar Nombre Único de Escena"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Conectando Desde)"
 
@@ -15561,6 +15585,9 @@ msgid ""
 "with the '%s' prefix in a node path.\n"
 "Click to disable this."
 msgstr ""
+"Se puede acceder a este nodo desde cualquier parte de la escena anteponiendo "
+"el prefijo '%s' en una ruta de nodo.\n"
+"Haz clic para desactivar esto."
 
 #: editor/scene_tree_editor.cpp
 msgid ""
@@ -15624,6 +15651,10 @@ msgstr ""
 "El nombre del nodo no es correcto, las siguientes letras no están permitidas:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "Otro nodo ya utiliza este nombre único en la escena."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Renombrar Nodo"
 
@@ -15853,15 +15884,15 @@ msgstr "Filtrar variables apiladas"
 
 #: editor/script_editor_debugger.cpp
 msgid "Auto Switch To Remote Scene Tree"
-msgstr ""
+msgstr "Cambio Automático al Árbol de Escenas Remoto"
 
 #: editor/script_editor_debugger.cpp
 msgid "Remote Scene Tree Refresh Interval"
-msgstr ""
+msgstr "Intervalo de Refresco del Árbol de Escenas Remoto"
 
 #: editor/script_editor_debugger.cpp
 msgid "Remote Inspect Refresh Interval"
-msgstr ""
+msgstr "Intervalo de Refresco de la Inspección Remota"
 
 #: editor/script_editor_debugger.cpp
 msgid "Network Profiler"
@@ -15959,7 +15990,7 @@ msgstr "Cambiar Radio de Luces"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Stream Player 3D"
-msgstr ""
+msgstr "Stream Player 3D"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Change AudioStreamPlayer3D Emission Angle"
@@ -15969,7 +16000,7 @@ msgstr "Cambiar Ángulo de Emisión de AudioStreamPlayer3D"
 #: platform/osx/export/export.cpp
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Camera"
-msgstr ""
+msgstr "Cámara"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Change Camera FOV"
@@ -15981,7 +16012,7 @@ msgstr "Cambiar Tamaño de Cámara"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Visibility Notifier"
-msgstr ""
+msgstr "Notificador de Visibilidad"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Change Notifier AABB"
@@ -16053,19 +16084,19 @@ msgstr "Navegación Sólida Desactivada"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Joint Body A"
-msgstr ""
+msgstr "Unir cuerpo A"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Joint Body B"
-msgstr ""
+msgstr "Unir cuerpo B"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Room Edge"
-msgstr ""
+msgstr "Límite del Room"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Room Overlap"
-msgstr ""
+msgstr "Solapamiento del Room"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Set Room Point Position"
@@ -16077,11 +16108,11 @@ msgstr "Margen del Portal"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Edge"
-msgstr ""
+msgstr "Borde del Portal"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Arrow"
-msgstr ""
+msgstr "Puntero del Portal"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Set Portal Point Position"
@@ -16089,7 +16120,7 @@ msgstr "Establecer Posición del Portal Point"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Front"
-msgstr ""
+msgstr "Frente del portal"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Back"
@@ -16130,7 +16161,7 @@ msgstr "Orificio Oclusor"
 
 #: main/main.cpp
 msgid "Godot Physics"
-msgstr ""
+msgstr "Físicas de Godot"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_sw.cpp
 #: servers/visual/visual_server_scene.cpp
@@ -16152,7 +16183,7 @@ msgstr "Servidor Multihilo"
 
 #: main/main.cpp
 msgid "RID Pool Prealloc"
-msgstr ""
+msgstr "RID Pool Prealloc"
 
 #: main/main.cpp
 msgid "Debugger stdout"
@@ -16160,31 +16191,31 @@ msgstr "Depurador stdout"
 
 #: main/main.cpp
 msgid "Max Chars Per Second"
-msgstr ""
+msgstr "Máx. Caracteres Por Segundo"
 
 #: main/main.cpp
 msgid "Max Messages Per Frame"
-msgstr ""
+msgstr "Máx. Llamadas Por Fotograma"
 
 #: main/main.cpp
 msgid "Max Errors Per Second"
-msgstr ""
+msgstr "Máx. Errores Por Segundo"
 
 #: main/main.cpp
 msgid "Max Warnings Per Second"
-msgstr ""
+msgstr "Máx. Alertas Por Segundo"
 
 #: main/main.cpp
 msgid "Flush stdout On Print"
-msgstr ""
+msgstr "Vaciar stdout Al Imprimir"
 
 #: main/main.cpp servers/visual_server.cpp
 msgid "Logging"
-msgstr ""
+msgstr "Registro"
 
 #: main/main.cpp
 msgid "File Logging"
-msgstr ""
+msgstr "Registro De Archivos"
 
 #: main/main.cpp
 msgid "Enable File Logging"
@@ -16196,11 +16227,11 @@ msgstr "Ruta del Registro"
 
 #: main/main.cpp
 msgid "Max Log Files"
-msgstr ""
+msgstr "Registro Máx. De Archivos"
 
 #: main/main.cpp
 msgid "Driver"
-msgstr ""
+msgstr "Controlador"
 
 #: main/main.cpp
 msgid "Driver Name"
@@ -16208,19 +16239,19 @@ msgstr "Nombre del Controlador"
 
 #: main/main.cpp
 msgid "Fallback To GLES2"
-msgstr ""
+msgstr "Altenar A GLES2"
 
 #: main/main.cpp
 msgid "Use Nvidia Rect Flicker Workaround"
-msgstr ""
+msgstr "Usar la solución de Nvidia Rect Flicker"
 
 #: main/main.cpp
 msgid "DPI"
-msgstr ""
+msgstr "DPI"
 
 #: main/main.cpp
 msgid "Allow hiDPI"
-msgstr ""
+msgstr "Permitir hiDPI"
 
 #: main/main.cpp
 msgid "V-Sync"
@@ -16232,15 +16263,15 @@ msgstr "Usar Sincronización Vertical"
 
 #: main/main.cpp
 msgid "Per Pixel Transparency"
-msgstr ""
+msgstr "Transparencia Por Pixel"
 
 #: main/main.cpp
 msgid "Allowed"
-msgstr ""
+msgstr "Permitido"
 
 #: main/main.cpp
 msgid "Intended Usage"
-msgstr ""
+msgstr "Uso Planteado"
 
 #: main/main.cpp
 msgid "Framebuffer Allocation"
@@ -16252,7 +16283,7 @@ msgstr "Ahorro de Energía"
 
 #: main/main.cpp
 msgid "Threads"
-msgstr ""
+msgstr "Hilos"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_wrap_mt.h
 msgid "Thread Model"
@@ -16260,11 +16291,11 @@ msgstr "Modelo de Hilo"
 
 #: main/main.cpp
 msgid "Thread Safe BVH"
-msgstr ""
+msgstr "Hilo Seguro BVH"
 
 #: main/main.cpp
 msgid "Handheld"
-msgstr ""
+msgstr "Manipulador"
 
 #: main/main.cpp platform/javascript/export/export.cpp
 #: platform/uwp/export/export.cpp
@@ -16274,7 +16305,7 @@ msgstr "Orientación"
 #: main/main.cpp scene/gui/scroll_container.cpp scene/gui/text_edit.cpp
 #: scene/main/scene_tree.cpp scene/register_scene_types.cpp
 msgid "Common"
-msgstr "Común"
+msgstr "Más información"
 
 #: main/main.cpp
 msgid "Physics FPS"
@@ -16286,25 +16317,25 @@ msgstr "Forzar FPS"
 
 #: main/main.cpp
 msgid "Enable Pause Aware Picking"
-msgstr ""
+msgstr "Activar Selección en Pausa"
 
 #: main/main.cpp scene/gui/item_list.cpp scene/gui/popup_menu.cpp
 #: scene/gui/scroll_container.cpp scene/gui/text_edit.cpp scene/gui/tree.cpp
 #: scene/main/viewport.cpp scene/register_scene_types.cpp
 msgid "GUI"
-msgstr ""
+msgstr "GUI"
 
 #: main/main.cpp
 msgid "Drop Mouse On GUI Input Disabled"
-msgstr ""
+msgstr "Colocar el Mouse en la Entrada de la GUI Desactivada"
 
 #: main/main.cpp
 msgid "stdout"
-msgstr ""
+msgstr "stdout"
 
 #: main/main.cpp
 msgid "Print FPS"
-msgstr ""
+msgstr "Imprimir FPS"
 
 #: main/main.cpp
 msgid "Verbose stdout"
@@ -16324,19 +16355,19 @@ msgstr "Retraso de los Fotogramas Msec"
 
 #: main/main.cpp
 msgid "Low Processor Mode"
-msgstr ""
+msgstr "Modo Para Procesadores Lentos"
 
 #: main/main.cpp
 msgid "Delta Sync After Draw"
-msgstr ""
+msgstr "Sincronizar Delta Después Del Evento Draw"
 
 #: main/main.cpp
 msgid "iOS"
-msgstr ""
+msgstr "iOS"
 
 #: main/main.cpp
 msgid "Hide Home Indicator"
-msgstr ""
+msgstr "Ocultar Indicador de Inicio"
 
 #: main/main.cpp
 msgid "Input Devices"
@@ -16344,15 +16375,15 @@ msgstr "Dispositivos de Entrada"
 
 #: main/main.cpp
 msgid "Pointing"
-msgstr "Apuntador"
+msgstr "Puntero"
 
 #: main/main.cpp
 msgid "Touch Delay"
-msgstr ""
+msgstr "Retraso De Toque"
 
 #: main/main.cpp servers/visual_server.cpp
 msgid "GLES3"
-msgstr ""
+msgstr "GLES3"
 
 #: main/main.cpp servers/visual_server.cpp
 msgid "Shaders"
@@ -16370,11 +16401,11 @@ msgstr "Entorno"
 
 #: main/main.cpp
 msgid "Default Clear Color"
-msgstr ""
+msgstr "Color Claro Predeterminado"
 
 #: main/main.cpp
 msgid "Boot Splash"
-msgstr ""
+msgstr "Pantalla de Splash"
 
 #: main/main.cpp
 msgid "Show Image"
@@ -16382,11 +16413,11 @@ msgstr "Mostrar Imagen"
 
 #: main/main.cpp
 msgid "Image"
-msgstr ""
+msgstr "imagen"
 
 #: main/main.cpp
 msgid "Fullsize"
-msgstr ""
+msgstr "Tamaño completo"
 
 #: main/main.cpp scene/resources/dynamic_font.cpp
 msgid "Use Filter"
@@ -16402,23 +16433,23 @@ msgstr "Icono Nativo de macOS"
 
 #: main/main.cpp
 msgid "Windows Native Icon"
-msgstr ""
+msgstr "Icono Nativo Para Windows"
 
 #: main/main.cpp
 msgid "Buffering"
-msgstr ""
+msgstr "Buffering"
 
 #: main/main.cpp
 msgid "Agile Event Flushing"
-msgstr ""
+msgstr "Evento Ágil de Vaciado"
 
 #: main/main.cpp
 msgid "Emulate Touch From Mouse"
-msgstr ""
+msgstr "Emular Toque Desde El Mouse"
 
 #: main/main.cpp
 msgid "Emulate Mouse From Touch"
-msgstr ""
+msgstr "Emular Mouse con el Toque"
 
 #: main/main.cpp
 msgid "Mouse Cursor"
@@ -16430,11 +16461,11 @@ msgstr "Imagen Personalizada"
 
 #: main/main.cpp
 msgid "Custom Image Hotspot"
-msgstr ""
+msgstr "Imagen personalizada para el Hotspot"
 
 #: main/main.cpp
 msgid "Tooltip Position Offset"
-msgstr "Desplazamiento de Posición del Tooltip"
+msgstr "Offset de Posición del Tooltip"
 
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
 msgid "Debugger Agent"
@@ -16450,11 +16481,11 @@ msgstr "Tiempo de Espera"
 
 #: main/main.cpp
 msgid "Runtime"
-msgstr ""
+msgstr "Tiempo De Ejecución"
 
 #: main/main.cpp
 msgid "Unhandled Exception Policy"
-msgstr ""
+msgstr "Política de Excepciones No Controladas"
 
 #: main/main.cpp
 msgid "Main Loop Type"
@@ -16471,11 +16502,11 @@ msgstr "Aspecto"
 
 #: main/main.cpp
 msgid "Shrink"
-msgstr ""
+msgstr "Reducción"
 
 #: main/main.cpp scene/main/scene_tree.cpp
 msgid "Auto Accept Quit"
-msgstr ""
+msgstr "Aceptar Cierre Del Programa Automáticamente"
 
 #: main/main.cpp scene/main/scene_tree.cpp
 msgid "Quit On Go Back"
@@ -16487,19 +16518,19 @@ msgstr "Ajustar Controles a Píxeles"
 
 #: main/main.cpp
 msgid "Dynamic Fonts"
-msgstr ""
+msgstr "Fuentes Dinámicas"
 
 #: main/main.cpp
 msgid "Use Oversampling"
-msgstr ""
+msgstr "Usar Sobremuestreo"
 
 #: modules/bullet/register_types.cpp modules/bullet/space_bullet.cpp
 msgid "Active Soft World"
-msgstr ""
+msgstr "Soft World Activo"
 
 #: modules/csg/csg_gizmos.cpp
 msgid "CSG"
-msgstr ""
+msgstr "CSG"
 
 #: modules/csg/csg_gizmos.cpp
 msgid "Change Cylinder Radius"
@@ -16523,7 +16554,7 @@ msgstr "Operación"
 
 #: modules/csg/csg_shape.cpp
 msgid "Calculate Tangents"
-msgstr ""
+msgstr "Calcular Tangentes"
 
 #: modules/csg/csg_shape.cpp
 msgid "Use Collision"
@@ -16572,7 +16603,7 @@ msgstr "Lados"
 
 #: modules/csg/csg_shape.cpp
 msgid "Cone"
-msgstr ""
+msgstr "Cono"
 
 #: modules/csg/csg_shape.cpp
 msgid "Inner Radius"
@@ -16584,7 +16615,7 @@ msgstr "Radio Exterior"
 
 #: modules/csg/csg_shape.cpp
 msgid "Ring Sides"
-msgstr ""
+msgstr "Lados del Anillo"
 
 #: modules/csg/csg_shape.cpp scene/2d/collision_polygon_2d.cpp
 #: scene/2d/light_occluder_2d.cpp scene/2d/polygon_2d.cpp
@@ -16594,11 +16625,11 @@ msgstr "Polígono"
 
 #: modules/csg/csg_shape.cpp
 msgid "Spin Degrees"
-msgstr ""
+msgstr "Grados de Giro"
 
 #: modules/csg/csg_shape.cpp
 msgid "Spin Sides"
-msgstr ""
+msgstr "Lados de Giro"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path Node"
@@ -16610,11 +16641,11 @@ msgstr "Tipo de Intervalo de Ruta"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path Interval"
-msgstr ""
+msgstr "Intervalo de Ruta"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path Simplify Angle"
-msgstr ""
+msgstr "Simplificar Ángulo de Ruta"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path Rotation"
@@ -16654,15 +16685,15 @@ msgstr "Siempre Ordenado"
 
 #: modules/enet/networked_multiplayer_enet.cpp
 msgid "Server Relay"
-msgstr ""
+msgstr "Repetidor del Servidor"
 
 #: modules/enet/networked_multiplayer_enet.cpp
 msgid "DTLS Verify"
-msgstr ""
+msgstr "Verificar DTLS"
 
 #: modules/enet/networked_multiplayer_enet.cpp
 msgid "DTLS Hostname"
-msgstr ""
+msgstr "Nombre de Host DTLS"
 
 #: modules/enet/networked_multiplayer_enet.cpp
 msgid "Use DTLS"
@@ -16670,11 +16701,11 @@ msgstr "Usar DTLS"
 
 #: modules/fbx/editor_scene_importer_fbx.cpp
 msgid "FBX"
-msgstr ""
+msgstr "FBX"
 
 #: modules/fbx/editor_scene_importer_fbx.cpp
 msgid "Use FBX"
-msgstr ""
+msgstr "Usar FBX"
 
 #: modules/gdnative/gdnative.cpp
 msgid "Config File"
@@ -16774,7 +16805,7 @@ msgstr "GDScript"
 
 #: modules/gdscript/editor/gdscript_highlighter.cpp
 msgid "Function Definition Color"
-msgstr ""
+msgstr "Función Definición de Color"
 
 #: modules/gdscript/editor/gdscript_highlighter.cpp
 msgid "Node Path Color"
@@ -16786,15 +16817,15 @@ msgstr ""
 
 #: modules/gdscript/gdscript.cpp
 msgid "Treat Warnings As Errors"
-msgstr ""
+msgstr "Tratar las Advertencias como Errores"
 
 #: modules/gdscript/gdscript.cpp
 msgid "Exclude Addons"
-msgstr ""
+msgstr "Excluir Addons"
 
 #: modules/gdscript/gdscript.cpp
 msgid "Autocomplete Setters And Getters"
-msgstr ""
+msgstr "Autocompletar Setters y Getters"
 
 #: modules/gdscript/gdscript_functions.cpp
 msgid "Step argument is zero!"
@@ -16846,11 +16877,11 @@ msgstr "Activar Smart Resolve"
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
 msgid "Show Native Symbols In Editor"
-msgstr ""
+msgstr "Mostrar Símbolos Nativos en el Editor"
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
 msgid "Use Thread"
-msgstr ""
+msgstr "Usar Hilo"
 
 #: modules/gltf/editor_scene_exporter_gltf_plugin.cpp
 msgid "Export Mesh GLTF2"
@@ -16866,7 +16897,7 @@ msgstr "Vista del Buffer"
 
 #: modules/gltf/gltf_accessor.cpp modules/gltf/gltf_buffer_view.cpp
 msgid "Byte Offset"
-msgstr "Desplazamiento de Byte"
+msgstr "Offset de Byte"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Component Type"
@@ -16894,11 +16925,11 @@ msgstr "Recuento Parcial"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Indices Buffer View"
-msgstr ""
+msgstr "Vista del Buffer de Índices Esparcidos"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Indices Byte Offset"
-msgstr ""
+msgstr "Índices Dispersos del Offset de Bytes"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Indices Component Type"
@@ -16906,11 +16937,11 @@ msgstr "Índices Dispersos de Tipo de Componente"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Values Buffer View"
-msgstr ""
+msgstr "Vista del Buffer de Valores Esparcidos"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Values Byte Offset"
-msgstr ""
+msgstr "Valores Dispersos del Offset de Bytes"
 
 #: modules/gltf/gltf_buffer_view.cpp
 msgid "Buffer"
@@ -16934,7 +16965,7 @@ msgstr "Tamaño de FOV"
 
 #: modules/gltf/gltf_camera.cpp
 msgid "Zfar"
-msgstr ""
+msgstr "Zfar"
 
 #: modules/gltf/gltf_camera.cpp
 msgid "Znear"
@@ -16954,7 +16985,7 @@ msgstr "Color"
 #: modules/gltf/gltf_light.cpp scene/3d/reflection_probe.cpp
 #: scene/resources/environment.cpp
 msgid "Intensity"
-msgstr ""
+msgstr "Intensidad"
 
 #: modules/gltf/gltf_light.cpp scene/2d/light_2d.cpp scene/3d/light.cpp
 msgid "Range"
@@ -16962,11 +16993,11 @@ msgstr "Rango"
 
 #: modules/gltf/gltf_light.cpp
 msgid "Inner Cone Angle"
-msgstr ""
+msgstr "Ángulo del Cono Interior"
 
 #: modules/gltf/gltf_light.cpp
 msgid "Outer Cone Angle"
-msgstr ""
+msgstr "Ángulo del Cono Exterior"
 
 #: modules/gltf/gltf_mesh.cpp
 msgid "Blend Weights"
@@ -16986,7 +17017,7 @@ msgstr "Xform"
 
 #: modules/gltf/gltf_node.cpp scene/3d/mesh_instance.cpp
 msgid "Skin"
-msgstr ""
+msgstr "Skin"
 
 #: modules/gltf/gltf_node.cpp scene/3d/spatial.cpp
 msgid "Translation"
@@ -17002,11 +17033,11 @@ msgstr "Articulaciones"
 
 #: modules/gltf/gltf_skeleton.cpp modules/gltf/gltf_skin.cpp
 msgid "Roots"
-msgstr ""
+msgstr "Raíces"
 
 #: modules/gltf/gltf_skeleton.cpp modules/gltf/gltf_state.cpp
 msgid "Unique Names"
-msgstr ""
+msgstr "Nombres Únicos"
 
 #: modules/gltf/gltf_skeleton.cpp
 msgid "Godot Bone Node"
@@ -17022,7 +17053,7 @@ msgstr "Articulaciones Originales"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Inverse Binds"
-msgstr ""
+msgstr "Enlaces Inversos"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Non Joints"
@@ -17030,27 +17061,27 @@ msgstr "Sin Articulaciones"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Joint I To Bone I"
-msgstr ""
+msgstr "Unir I a Hueso I"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Joint I To Name"
-msgstr ""
+msgstr "Unir I a Nombre"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Godot Skin"
-msgstr ""
+msgstr "Skin de Godot"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Diffuse Img"
-msgstr ""
+msgstr "Imagen Difusa"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Diffuse Factor"
-msgstr ""
+msgstr "Factor Difuso"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Gloss Factor"
-msgstr ""
+msgstr "Factor de Brillo"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Specular Factor"
@@ -17103,7 +17134,7 @@ msgstr "Texturas"
 
 #: modules/gltf/gltf_state.cpp platform/uwp/export/export.cpp
 msgid "Images"
-msgstr ""
+msgstr "Imágenes"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Cameras"
@@ -17131,7 +17162,7 @@ msgstr "Animaciones"
 
 #: modules/gltf/gltf_texture.cpp
 msgid "Src Image"
-msgstr "Imagen de Origen"
+msgstr "Origen de la Imagen"
 
 #: modules/gridmap/grid_map.cpp
 msgid "Mesh Library"
@@ -17364,7 +17395,7 @@ msgstr ""
 #: modules/stb_vorbis/audio_stream_ogg_vorbis.cpp
 #: modules/stb_vorbis/resource_importer_ogg_vorbis.cpp
 msgid "Loop Offset"
-msgstr "Desplazamiento de Ciclo"
+msgstr "Offset de Bucle"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "Eye Height"
@@ -17406,6 +17437,21 @@ msgstr "Crear Solución"
 msgid "Auto Update Project"
 msgstr "Actualización Automática del Proyecto"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Nombre a Mostrar"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Selecciona un directorio"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Selecciona un directorio"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Fin del reporte de la pila de excepciones"
@@ -17495,7 +17541,7 @@ msgstr ""
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "Noise Offset"
-msgstr "Desplazamiento de Ruido"
+msgstr "Offset de Ruido"
 
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Octaves"
@@ -17566,8 +17612,8 @@ msgid ""
 "A node yielded without working memory, please read the docs on how to yield "
 "properly!"
 msgstr ""
-"¡Un nodo ejecutó un yield sin memoria de trabajo. Prueba leyendo la "
-"documentación sobre cómo utilizar yield!"
+"¡Un nodo realizo un yield sin memoria de trabajo, por favor, lee la "
+"documentación sobre cómo usar yield correctamente!"
 
 #: modules/visual_script/visual_script.cpp
 msgid ""
@@ -17617,7 +17663,7 @@ msgstr "Cambiar Nombre del Argumento"
 
 #: modules/visual_script/visual_script_editor.cpp
 msgid "Set Variable Default Value"
-msgstr "Establecer Valor por Defecto de la Variable"
+msgstr "Fijar Valor Predeterminado de la Variable"
 
 #: modules/visual_script/visual_script_editor.cpp
 msgid "Set Variable Type"
@@ -18034,7 +18080,7 @@ msgstr "Ruta del Nodo"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "Use Default Args"
-msgstr "Usar Argumentos por Defecto"
+msgstr "Usar Argumentos Predeterminados"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "Validate"
@@ -18787,7 +18833,7 @@ msgid ""
 "\"Target SDK\" %d is higher than the default version %d. This may work, but "
 "wasn't tested and may be unstable."
 msgstr ""
-"\"SDK de Destino\" %d es superior a la versión por defecto %d. Podría "
+"\"SDK de Destino\" %d es superior a la versión predeterminada %d. Podría "
 "funcionar, pero no se ha probado y puede ser inestable."
 
 #: platform/android/export/export_plugin.cpp
@@ -19169,6 +19215,11 @@ msgstr "Usar Color de Fondo Personalizado"
 msgid "Custom BG Color"
 msgstr "Color de Fondo Personalizado"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Icono de Exportación"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19994,6 +20045,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Nombre corto del paquete inválido."
 
@@ -20020,43 +20077,41 @@ msgstr "Color de fondo inválido."
 #: platform/uwp/export/export.cpp
 msgid "Invalid Store Logo image dimensions (should be 50x50)."
 msgstr ""
-"Las dimensiones de la imagen para el Store Logo son inválidas (debería ser "
-"50x50)."
+"Las dimensiones del logo de la tienda son inválidas (debería ser 50x50)."
 
 #: platform/uwp/export/export.cpp
 msgid "Invalid square 44x44 logo image dimensions (should be 44x44)."
 msgstr ""
-"Las dimensiones de la imagen para el logo cuadrado de 44x44 son inválidas "
-"(debería ser 44x44)."
+"Las dimensiones de la imagen del logo cuadrado 44x44 son inválidas (deben "
+"ser 44x44)."
 
 #: platform/uwp/export/export.cpp
 msgid "Invalid square 71x71 logo image dimensions (should be 71x71)."
 msgstr ""
-"Las dimensiones de la imagen para el logo cuadrado de 71x71 son inválidas "
-"(debería ser 71x71)."
+"Las dimensiones de la imagen del logo cuadrado 71x71 son inválidas ( deben "
+"ser 71x71)."
 
 #: platform/uwp/export/export.cpp
 msgid "Invalid square 150x150 logo image dimensions (should be 150x150)."
 msgstr ""
-"Las dimensiones de la imagen para el logo cuadrado de 150x150 son inválidas "
-"(debería ser 150x150)."
+"Las dimensiones de la imagen del logo cuadrado 150x150 son inválidas ( deben "
+"ser 150x150)."
 
 #: platform/uwp/export/export.cpp
 msgid "Invalid square 310x310 logo image dimensions (should be 310x310)."
 msgstr ""
-"Las dimensiones de la imagen para el logo cuadrado de 310x310 son inválidas "
-"(debería ser 310x310)."
+"Las dimensiones de la imagen del logo cuadrado 310x310 son inválidas ( deben "
+"ser 310x310)."
 
 #: platform/uwp/export/export.cpp
 msgid "Invalid wide 310x150 logo image dimensions (should be 310x150)."
-msgstr ""
-"Las dimensiones de la imagen para el logo ancho de 310x150 son inválidas "
-"(debería ser 310x150)."
+msgstr "Las dimensiones del logo son inválidas (deben ser 310x150)."
 
 #: platform/uwp/export/export.cpp
 msgid "Invalid splash screen image dimensions (should be 620x300)."
 msgstr ""
-"Las dimensiones de la imagen del splash son inválidas (debería ser 620x300)."
+"Las dimensiones de la imagen de la pantalla de splash son inválidas (deben "
+"ser 620x300)."
 
 #: platform/uwp/export/export.cpp
 msgid "UWP"
@@ -20131,19 +20186,18 @@ msgid "Could not find wine executable at \"%s\"."
 msgstr "No se pudo encontrar el ejecutable de wine en \"%s\"."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid ""
 "Could not start rcedit executable. Configure rcedit path in the Editor "
 "Settings (Export > Windows > Rcedit), or disable \"Application > Modify "
 "Resources\" in the export preset."
 msgstr ""
-"No se ha podido iniciar el ejecutable rcedit, configura la ruta de rcedit en "
-"la configuración del editor (Exportar > Windows > Rcedit)."
+"No se ha podido iniciar el ejecutable de rcedit. Configura la ruta de rcedit "
+"en la configuración del editor (Exportar > Windows > Rcedit), o desactiva "
+"\"Aplicación > Modificar Recursos\" en el preset de exportación."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "rcedit failed to modify executable: %s."
-msgstr "Fallo al abrir el archivo ejecutable \"%s\"."
+msgstr "rcedit falló al modificar el ejecutable: %s."
 
 #: platform/windows/export/export.cpp
 msgid "Could not find signtool executable at \"%s\"."
@@ -20162,19 +20216,18 @@ msgid "Invalid timestamp server."
 msgstr "Servidor de marcas de tiempo inválido."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid ""
 "Could not start signtool executable. Configure signtool path in the Editor "
 "Settings (Export > Windows > Signtool), or disable \"Codesign\" in the "
 "export preset."
 msgstr ""
-"No se ha podido iniciar el ejecutable de signtool, configura la ruta de "
-"signtool en la configuración del editor (Exportar > Windows > Signtool)."
+"No se ha podido iniciar el ejecutable de signtool. Configura la ruta de "
+"signtool en la configuración del editor (Exportar > Windows > Signtool), o "
+"desactiva \"Codesign\" en el preset de exportación."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Signtool failed to sign executable: %s."
-msgstr "Fallo al abrir el archivo ejecutable \"%s\"."
+msgstr "Signtool no pudo firmar el ejecutable: %s."
 
 #: platform/windows/export/export.cpp
 msgid "Failed to remove temporary file \"%s\"."
@@ -20865,12 +20918,12 @@ msgstr "Curva de Velocidad"
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
 msgid "Offset Random"
-msgstr "Desplazamiento Aleatorio"
+msgstr "Offset Aleatorio"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
 msgid "Offset Curve"
-msgstr "Curva de Desplazamiento"
+msgstr "Curva de Offset"
 
 #: scene/2d/joints_2d.cpp
 msgid "Node A and Node B must be PhysicsBody2Ds"
@@ -20921,7 +20974,7 @@ msgstr ""
 
 #: scene/2d/joints_2d.cpp
 msgid "Initial Offset"
-msgstr "Desplazamiento Inicial"
+msgstr "Offset Inicial"
 
 #: scene/2d/joints_2d.cpp scene/3d/vehicle_body.cpp
 msgid "Rest Length"
@@ -21016,7 +21069,7 @@ msgstr "Curva de Ancho"
 
 #: scene/2d/line_2d.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Default Color"
-msgstr "Color por Defecto"
+msgstr "Color Predeterminado"
 
 #: scene/2d/line_2d.cpp scene/resources/texture.cpp
 msgid "Fill"
@@ -21128,7 +21181,7 @@ msgstr "Velocidad Máxima"
 msgid ""
 "The NavigationAgent2D can be used only under a Node2D inheriting parent node."
 msgstr ""
-"El NavigationAgent2D sólo puede utilizarse bajo un nodo padre hijo de Node2D."
+"El NavigationAgent2D solo puede usarse con un nodo padre del tipo Node2D."
 
 #: scene/2d/navigation_obstacle_2d.cpp scene/3d/navigation_obstacle.cpp
 msgid "Estimate Radius"
@@ -21194,7 +21247,7 @@ msgstr "Scroll"
 
 #: scene/2d/parallax_background.cpp
 msgid "Base Offset"
-msgstr "Desplazamiento Base"
+msgstr "Offset Base"
 
 #: scene/2d/parallax_background.cpp
 msgid "Base Scale"
@@ -21291,15 +21344,15 @@ msgstr ""
 
 #: scene/2d/path_2d.cpp scene/3d/path.cpp
 msgid "Unit Offset"
-msgstr "Desplazamiento de Unidad"
+msgstr "Offset de Unidad"
 
 #: scene/2d/path_2d.cpp scene/3d/camera.cpp scene/3d/path.cpp
 msgid "H Offset"
-msgstr "Desplazamiento H"
+msgstr "Offset H"
 
 #: scene/2d/path_2d.cpp scene/3d/camera.cpp scene/3d/path.cpp
 msgid "V Offset"
-msgstr "Desplazamiento V"
+msgstr "Offset V"
 
 #: scene/2d/path_2d.cpp scene/3d/path.cpp
 msgid "Cubic Interp"
@@ -21338,7 +21391,7 @@ msgstr ""
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
 msgid "Default Gravity"
-msgstr "Gravedad por Defecto"
+msgstr "Gravedad Predeterminada"
 
 #: scene/2d/physics_body_2d.cpp
 msgid ""
@@ -21517,7 +21570,7 @@ msgstr "Ruta Remota"
 
 #: scene/2d/remote_transform_2d.cpp scene/3d/remote_transform.cpp
 msgid "Use Global Coordinates"
-msgstr "Utilizar Coordenadas Globales"
+msgstr "Usar Coordenadas Globales"
 
 #: scene/2d/skeleton_2d.cpp scene/3d/skeleton.cpp
 msgid "Rest"
@@ -21525,7 +21578,7 @@ msgstr "Reposo"
 
 #: scene/2d/skeleton_2d.cpp
 msgid "Default Length"
-msgstr "Longitud por Defecto"
+msgstr "Longitud Predeterminada"
 
 #: scene/2d/skeleton_2d.cpp
 msgid "This Bone2D chain should end at a Skeleton2D node."
@@ -21583,7 +21636,7 @@ msgstr "Transformación Personalizada"
 
 #: scene/2d/tile_map.cpp
 msgid "Half Offset"
-msgstr "Medio Desplazamiento"
+msgstr "Medio Offset"
 
 #: scene/2d/tile_map.cpp
 msgid "Tile Origin"
@@ -21877,7 +21930,7 @@ msgstr "Propagación"
 
 #: scene/3d/baked_lightmap.cpp
 msgid "Image Path"
-msgstr ""
+msgstr "Ruta de la Imagen"
 
 #: scene/3d/baked_lightmap.cpp
 msgid "Light Data"
@@ -22263,7 +22316,7 @@ msgstr "Altura de la Celda"
 
 #: scene/3d/navigation_agent.cpp
 msgid "Agent Height Offset"
-msgstr ""
+msgstr "Offset de Altura del Agente"
 
 #: scene/3d/navigation_agent.cpp
 msgid "Ignore Y"
@@ -22273,7 +22326,7 @@ msgstr "Ignorar Y"
 msgid ""
 "The NavigationAgent can be used only under a Spatial inheriting parent node."
 msgstr ""
-"El NavigationAgent solo puede utilizarse en un nodo padre de tipo Spatial."
+"El NavigationAgent solo puede usarse con un nodo padre de tipo Spatial."
 
 #: scene/3d/navigation_mesh_instance.cpp scene/resources/mesh_library.cpp
 msgid "NavMesh"
@@ -22557,7 +22610,7 @@ msgstr "Punto de Equilibrio Angular"
 
 #: scene/3d/physics_body.cpp
 msgid "Body Offset"
-msgstr "Desplazamiento del Cuerpo"
+msgstr "Offset del Cuerpo"
 
 #: scene/3d/physics_joint.cpp
 msgid "Node A and Node B must be PhysicsBodies"
@@ -22761,7 +22814,7 @@ msgstr "Sala Vinculada"
 
 #: scene/3d/portal.cpp
 msgid "Use Default Margin"
-msgstr "Usar Margen por Defecto"
+msgstr "Usar Margen Predeterminado"
 
 #: scene/3d/proximity_group.cpp
 msgid "Group Name"
@@ -22789,7 +22842,7 @@ msgstr "Modo de Actualización"
 
 #: scene/3d/reflection_probe.cpp
 msgid "Origin Offset"
-msgstr "Desplazamiento de Origen"
+msgstr "Offset de Origen"
 
 #: scene/3d/reflection_probe.cpp
 msgid "Box Projection"
@@ -22842,7 +22895,7 @@ msgstr ""
 
 #: scene/3d/room.cpp
 msgid "Use Default Simplify"
-msgstr ""
+msgstr "Usar Simplificación Predeterminada"
 
 #: scene/3d/room.cpp scene/3d/room_manager.cpp
 msgid "Room Simplify"
@@ -22945,7 +22998,7 @@ msgstr ""
 
 #: scene/3d/room_manager.cpp
 msgid "Default Portal Margin"
-msgstr "Margen del Portal por Defecto"
+msgstr "Margen del Portal Predeterminado"
 
 #: scene/3d/room_manager.cpp
 msgid "Roaming Expansion Margin"
@@ -23351,7 +23404,7 @@ msgstr "Opciones de Reproducción"
 
 #: scene/animation/animation_player.cpp
 msgid "Default Blend Time"
-msgstr "Tiempo de Mezcla por Defecto"
+msgstr "Tiempo de Mezcla Predeterminado"
 
 #: scene/animation/animation_player.cpp
 msgid "Method Call Mode"
@@ -23618,7 +23671,7 @@ msgstr "Tamaño Mínimo"
 
 #: scene/gui/control.cpp
 msgid "Pivot Offset"
-msgstr "Pivote de Desplazamiento"
+msgstr "Pivote de Offset"
 
 #: scene/gui/control.cpp
 msgid "Clip Content"
@@ -23666,7 +23719,7 @@ msgstr ""
 
 #: scene/gui/control.cpp
 msgid "Default Cursor Shape"
-msgstr "Forma del Cursor por Defecto"
+msgstr "Forma del Cursor Predeterminado"
 
 #: scene/gui/control.cpp
 msgid "Pass On Modal Close Click"
@@ -23718,7 +23771,7 @@ msgstr "Desconexión Correcta"
 
 #: scene/gui/graph_edit.cpp
 msgid "Scroll Offset"
-msgstr "Desplazamiento de Scroll"
+msgstr "Offset de Scroll"
 
 #: scene/gui/graph_edit.cpp
 msgid "Snap Distance"
@@ -24035,7 +24088,6 @@ msgid "Elapsed Time"
 msgstr "Tiempo Transcurrido"
 
 #: scene/gui/rich_text_effect.cpp
-#, fuzzy
 msgid "Env"
 msgstr "Env"
 
@@ -24107,7 +24159,7 @@ msgstr "Vertical Activada"
 
 #: scene/gui/scroll_container.cpp
 msgid "Default Scroll Deadzone"
-msgstr ""
+msgstr "Zona Muerta Predeterminada del Scroll"
 
 #: scene/gui/slider.cpp
 msgid "Scrollable"
@@ -24131,7 +24183,7 @@ msgstr "Sufijo"
 
 #: scene/gui/split_container.cpp
 msgid "Split Offset"
-msgstr "Desplazamiento de División"
+msgstr "Offset de División"
 
 #: scene/gui/split_container.cpp scene/gui/tree.cpp
 msgid "Collapsed"
@@ -24260,7 +24312,7 @@ msgstr "Progreso"
 
 #: scene/gui/texture_progress.cpp
 msgid "Progress Offset"
-msgstr ""
+msgstr "Offset de Progreso"
 
 #: scene/gui/texture_progress.cpp
 msgid "Fill Mode"
@@ -24284,7 +24336,7 @@ msgstr "Completar Grados"
 
 #: scene/gui/texture_progress.cpp scene/resources/primitive_meshes.cpp
 msgid "Center Offset"
-msgstr "Desplazamiento Central"
+msgstr "Offset Central"
 
 #: scene/gui/texture_progress.cpp
 msgid "Nine Patch Stretch"
@@ -24515,15 +24567,16 @@ msgstr ""
 
 #: scene/main/scene_tree.cpp
 msgid "Default Environment"
-msgstr "Entorno por Defecto"
+msgstr "Entorno Predeterminado"
 
 #: scene/main/scene_tree.cpp
 msgid ""
 "Default Environment as specified in Project Settings (Rendering -> "
 "Environment -> Default Environment) could not be loaded."
 msgstr ""
-"El Entorno por Defecto como se especifica en Configuración del Proyecto "
-"(Rendering -> Environment -> Default Environment) no se ha podido cargar."
+"No se ha podido cargar el entorno predeterminado especificado en la "
+"configuración del proyecto (Renderizado -> Entorno -> Entorno "
+"Predeterminado)."
 
 #: scene/main/scene_tree.cpp
 msgid "Enable Object Picking"
@@ -24536,11 +24589,11 @@ msgid ""
 "Consider using a script's process loop instead of relying on a Timer for "
 "very low wait times."
 msgstr ""
-"Los tiempos de espera del temporizador muy bajos (< 0,05 segundos) pueden "
-"comportarse de manera significativamente diferente dependiendo de la "
-"velocidad de fotogramas renderizados o de la física.\n"
-"Considera la posibilidad de utilizar un bucle en process dentro del script "
-"en lugar de depender de un Timer para tiempos de espera muy bajos."
+"Los tiempos de espera del temporizador son muy bajos (< 0.05 segundos) y se "
+"puede comportar de manera muy diferente dependiendo de la tasa de fotogramas "
+"renderizados o de la física.\n"
+"Considera la posibilidad de utilizar un bucle de procesos en un script en "
+"lugar de depender de un Timer para tiempos de espera muy bajos."
 
 #: scene/main/timer.cpp
 msgid "Autostart"
@@ -24605,7 +24658,6 @@ msgid "FXAA"
 msgstr "FXAA"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Debanding"
 msgstr "Debanding"
 
@@ -24686,9 +24738,8 @@ msgid "Tooltip Delay (sec)"
 msgstr "Retraso del Tooltip (sec)"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "Swap OK Cancel"
-msgstr "Intercambio OK Cancelar"
+msgstr "Cancelar"
 
 #: scene/register_scene_types.cpp
 msgid "Layer Names"
@@ -24832,7 +24883,6 @@ msgid "Check V Adjust"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "On Disabled"
 msgstr "Desactivado"
 
@@ -24854,11 +24904,11 @@ msgstr "Modulación del Contorno de la Fuente"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Shadow Offset X"
-msgstr "Desplazamiento de la Sombra en X"
+msgstr "Offset de Sombra en X"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Shadow Offset Y"
-msgstr "Desplazamiento de la Sombra en Y"
+msgstr "Offset de Sombra en Y"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Shadow As Outline"
@@ -24923,43 +24973,36 @@ msgid "Completion Lines"
 msgstr "Finalización de Líneas"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion Max Width"
-msgstr "Completar"
+msgstr "Completar Ancho Máximo"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion Scroll Width"
-msgstr "Importar Seleccionado"
+msgstr "Completar Ancho de Scroll"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Focus"
-msgstr "Llenar superficie"
+msgstr "Enfoque de Scroll"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Grabber"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grabber Highlight"
-msgstr "Resaltador de Sintaxis"
+msgstr "Agarre Resaltado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grabber Pressed"
-msgstr "Preset"
+msgstr "Agarre Presionado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Increment"
-msgstr "Instrumento"
+msgstr "Incremento"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Increment Highlight"
-msgstr "Resaltador de Sintaxis"
+msgstr "Incremento Resaltado"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Increment Pressed"
@@ -24970,9 +25013,8 @@ msgid "Decrement"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Decrement Highlight"
-msgstr "Resaltador de Sintaxis"
+msgstr "Decremento Resaltado"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Decrement Pressed"
@@ -24991,9 +25033,8 @@ msgid "Grabber Area Highlight"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grabber Disabled"
-msgstr "Desactivar Elemento"
+msgstr "Agarre Desactivado"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Tick"
@@ -25004,74 +25045,60 @@ msgid "Updown"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scaleborder Size"
-msgstr "Tamaño del Borde"
+msgstr "Tamaño del Borde de la Escala"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Font"
-msgstr "Código Fuente"
+msgstr "Fuente del Título"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Color"
-msgstr "Color de Texto"
+msgstr "Color del Título"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Height"
-msgstr "Prueba"
+msgstr "Altura del Título"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close Highlight"
-msgstr "Resaltado"
+msgstr "Cierre Resaltado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close H Offset"
-msgstr "Desplazamiento de Ruido"
+msgstr "Cerrar Offset H"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close V Offset"
-msgstr "Desplazamiento de Ruido"
+msgstr "Cerrar Offset V"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Parent Folder"
-msgstr "Crear Carpeta"
+msgstr "Carpeta Padre"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Toggle Hidden"
-msgstr "Act./Desact. Archivos Ocultos"
+msgstr "Oculto"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Panel Disabled"
-msgstr "Clip Deshabilitado"
+msgstr "Panel Desactivado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Labeled Separator Left"
-msgstr "Separador con nombre"
+msgstr "Separador con Etiqueta a la Izquierda"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Labeled Separator Right"
-msgstr "Separador con nombre"
+msgstr "Separador con Etiqueta a la Derecha"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Separator"
-msgstr "Separador de Color de Fuentes"
+msgstr "Separación de Fuente"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color Accel"
-msgstr "Color Hueso 1"
+msgstr "Color de Fuente Accel"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Font Color Separator"
@@ -25082,230 +25109,188 @@ msgid "V Separation"
 msgstr "Separación en V"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Selected Frame"
-msgstr "Seleccionar Fotogramas"
+msgstr "Cuadro Seleccionado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Default Frame"
-msgstr "Z Lejana por Defecto"
+msgstr "Cuadro Predeterminado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Default Focus"
-msgstr "Por defecto"
+msgstr "Enfoque Predeterminado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Comment Focus"
-msgstr "Confirmar"
+msgstr "Comentario Enfocado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Breakpoint"
-msgstr "Puntos de interrupción"
+msgstr "Punto de Ruptura"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Resizer"
-msgstr "Redimensionable"
+msgstr "Reajuste"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close Color"
-msgstr "Colores"
+msgstr "Cerrar Color"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Resizer Color"
-msgstr "Colores"
+msgstr "Cambiar Color"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Offset"
-msgstr "Desplazamiento de Byte"
+msgstr "Offset del Título"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close Offset"
-msgstr "Desplazamiento de Ruido"
+msgstr "Offset de Cierre"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Port Offset"
-msgstr "Pivote de Desplazamiento"
+msgstr "Offset del Puerto"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "BG Focus"
-msgstr "Foco en Ruta"
+msgstr "Enfocar BG"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Selected Focus"
-msgstr "Seleccionar"
+msgstr "Enfoque Seleccionado"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Cursor Unfocused"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Button Pressed"
-msgstr "Preset"
+msgstr "Botón Presionado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Button Normal"
-msgstr "Botón de Conmutación"
+msgstr "Botón del Título Normal"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Button Pressed"
-msgstr "Botón de Conmutación"
+msgstr "Botón del Título Presionado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Button Hover"
-msgstr "Botón de Conmutación"
+msgstr "Botón de Título Hover"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Custom Button"
-msgstr "CustomNode"
+msgstr "Botón Personalizado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Custom Button Pressed"
-msgstr "Opciones de Bus"
+msgstr "Botón Personalizado Presionado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Custom Button Hover"
-msgstr "CustomNode"
+msgstr "Botón Personalizado Hover"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Select Arrow"
-msgstr "Seleccionar Todo"
+msgstr "Seleccionar Flecha"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Arrow Collapsed"
-msgstr "Colapsar Todo"
+msgstr "Flecha Colapsada"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Button Font"
-msgstr "Botón de Conmutación"
+msgstr "Fuente del Título del Botón"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Button Color"
-msgstr "Color de Selección"
+msgstr "Color del Título del Botón"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Guide Color"
-msgstr "Color de Guías"
+msgstr "Guía de Colores"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Drop Position Color"
-msgstr "Posición del Dock"
+msgstr "Posición del Gotero de Color"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Relationship Line Color"
-msgstr "Opacidad De Línea De Relación"
+msgstr "Color de la Línea de Relación"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Custom Button Font Highlight"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Item Margin"
-msgstr "Asignar Margen"
+msgstr "Margen del Ítem"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Button Margin"
-msgstr "Máscara de Botones"
+msgstr "Margen del Botón"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Draw Relationship Lines"
-msgstr "Opacidad De Línea De Relación"
+msgstr "Dibujar Líneas de Relación"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Draw Guides"
-msgstr "Mostrar Guías"
+msgstr "Guías de Dibujo"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Border"
-msgstr "Desplazarse Verticalmente"
+msgstr "Borde del Scroll"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Speed"
-msgstr "Velocidad Desplazamiento V"
+msgstr "Velocidad del Scroll"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Icon Margin"
-msgstr "Asignar Margen"
+msgstr "Margen del Icono"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Line Separation"
 msgstr "Separación de Líneas"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Tab FG"
-msgstr "Tab 1"
+msgstr "Pestaña FG"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Tab BG"
-msgstr "Tab 1"
+msgstr "Pestaña BG"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Tab Disabled"
-msgstr "Desactivar Elemento"
+msgstr "Pestaña Desactivada"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Menu"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Menu Highlight"
-msgstr "Resaltado"
+msgstr "Menú Resaltado"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color FG"
-msgstr "Color Hueso 1"
+msgstr "Color de Fuente FG"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color BG"
-msgstr "Color Hueso 1"
+msgstr "Color de Fuente BG"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Side Margin"
-msgstr "Asignar Margen"
+msgstr "Margen Lateral"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Top Margin"
-msgstr "Asignar Margen"
+msgstr "Margen Superior"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Label V Align FG"
@@ -25316,86 +25301,72 @@ msgid "Label V Align BG"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Large"
-msgstr "Objetivo"
+msgstr "Largo"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Folder"
 msgstr "Carpeta"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Folder Icon Modulate"
-msgstr "Forzar Modulación en Blanco"
+msgstr "Modular Icono de Carpeta"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "File Icon Modulate"
-msgstr "Modo de Icono"
+msgstr "Modular Icono de Archivo"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Files Disabled"
-msgstr "Clip Deshabilitado"
+msgstr "Archivos Desactivados"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "SV Width"
-msgstr "Ancho Izquierda"
+msgstr "Ancho SV"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "SV Height"
-msgstr "Luz"
+msgstr "Alto SV"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "H Width"
-msgstr "Ancho Izquierda"
+msgstr "Ancho H"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Label Width"
-msgstr "Ancho Izquierda"
+msgstr "Ancho de Etiqueta"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Screen Picker"
 msgstr "Selector de Pantalla"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Add Preset"
-msgstr "Cargar Ajuste Predeterminado"
+msgstr "Añadir Preset"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Color Hue"
-msgstr "Textura de Color"
+msgstr "Tono de Color"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Color Sample"
-msgstr "Colores"
+msgstr "Muestra de Color"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Preset BG"
-msgstr "Preajuste"
+msgstr "Preset BG"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Overbright Indicator"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Preset FG"
-msgstr "Preajuste"
+msgstr "Preset FG"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Preset BG Icon"
-msgstr "Preajuste"
+msgstr "Preset Icono BG"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Normal Font"
@@ -25414,9 +25385,8 @@ msgid "Bold Italics Font"
 msgstr "Fuente Negrita y Cursiva"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Mono Font"
-msgstr "Fuente Principal"
+msgstr "Fuente Mono"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Table H Separation"
@@ -25443,9 +25413,8 @@ msgid "Margin Bottom"
 msgstr "Margen Inferior"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Autohide"
-msgstr "Corte Automático"
+msgstr "Ocultar Automáticamente"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Minus"
@@ -25456,76 +25425,64 @@ msgid "More"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grid Minor"
-msgstr "Color de Cuadrícula"
+msgstr "Grid Menor"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grid Major"
-msgstr "Mapeo de Cuadrícula"
+msgstr "Grid Mayor"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Selection Fill"
-msgstr "Sólo selección"
+msgstr "Relleno de Selección"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Selection Stroke"
-msgstr "Seleccionar Propiedad"
+msgstr "Selección de Stroke"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Activity"
-msgstr "Acción"
+msgstr "Actividad"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Bezier Len Pos"
-msgstr "Mover Puntos Bezier"
+msgstr "Bezier Len Pos"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Bezier Len Neg"
-msgstr "Bezier"
+msgstr "Bezier Len Neg"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Port Grab Distance Horizontal"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Port Grab Distance Vertical"
-msgstr "WaitInstanceSignal"
+msgstr "Distancia Vertical del Puerto de Agarre"
 
 #: scene/resources/dynamic_font.cpp
 msgid "Hinting"
 msgstr ""
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Override Oversampling"
-msgstr "Elemento de Anulación"
+msgstr "Anular Sobremuestreo"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Font Path"
-msgstr "Foco en Ruta"
+msgstr "Ruta de la Fuente"
 
 #: scene/resources/dynamic_font.cpp
 msgid "Outline Size"
 msgstr "Tamaño del Contorno"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Outline Color"
-msgstr "Función"
+msgstr "Color del Contorno"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Use Mipmaps"
-msgstr "Señales"
+msgstr "Usar Mipmaps"
 
 #: scene/resources/dynamic_font.cpp
 msgid "Extra Spacing"
@@ -25536,9 +25493,8 @@ msgid "Char"
 msgstr "Char"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Font Data"
-msgstr "Con Datos"
+msgstr "Datos de la Fuente"
 
 #: scene/resources/environment.cpp
 msgid "Background"
@@ -25549,14 +25505,12 @@ msgid "Sky"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sky Custom FOV"
-msgstr "CustomNode"
+msgstr "FOV Personalizado del Cielo"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sky Orientation"
-msgstr "Documentación en línea"
+msgstr "Orientación del Cielo"
 
 #: scene/resources/environment.cpp
 msgid "Sky Rotation"
@@ -25575,14 +25529,12 @@ msgid "Camera Feed ID"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Ambient Light"
-msgstr "Indentar a la Derecha"
+msgstr "Luz Ambiental"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sky Contribution"
-msgstr "Condición"
+msgstr "Contribución del Cielo"
 
 #: scene/resources/environment.cpp
 msgid "Fog"
@@ -25597,64 +25549,52 @@ msgid "Sun Amount"
 msgstr "Cantidad de Sol"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth Enabled"
-msgstr "Profundidad"
+msgstr "Profundidad Activada"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth Begin"
-msgstr "Profundidad"
+msgstr "Inicio de la Profundidad"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth End"
-msgstr "Profundidad"
+msgstr "Fin de la Profundidad"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth Curve"
-msgstr "Partir Curva"
+msgstr "Curva de Profundidad"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Transmit Enabled"
-msgstr "Filtrar señales"
+msgstr "Transmisión Activada"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Transmit Curve"
-msgstr "Partir Curva"
+msgstr "Curva de Transmisión"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Height Enabled"
-msgstr "Filtrar señales"
+msgstr "Altura Activada"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Height Min"
-msgstr "Luz"
+msgstr "Altura Mínima"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Height Max"
-msgstr "Luz"
+msgstr "Altura Máxima"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Height Curve"
-msgstr "Partir Curva"
+msgstr "Curva de Altura"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Tonemap"
-msgstr "Remapeos"
+msgstr "Tonemap"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Exposure"
-msgstr "Exportar"
+msgstr "Exposición"
 
 #: scene/resources/environment.cpp
 msgid "White"
@@ -25673,14 +25613,12 @@ msgid "Max Luma"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "SS Reflections"
-msgstr "Escalar Selección"
+msgstr "Reflexiones SS"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Max Steps"
-msgstr "Paso"
+msgstr "Pasos Máximos"
 
 #: scene/resources/environment.cpp
 msgid "Fade In"
@@ -25691,9 +25629,8 @@ msgid "Fade Out"
 msgstr "Fundido de Salida"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth Tolerance"
-msgstr "Profundidad"
+msgstr "Tolerancia de Profundidad"
 
 #: scene/resources/environment.cpp scene/resources/material.cpp
 msgid "Roughness"
@@ -25712,14 +25649,12 @@ msgid "Intensity 2"
 msgstr ""
 
 #: scene/resources/environment.cpp scene/resources/material.cpp
-#, fuzzy
 msgid "Light Affect"
-msgstr "Ancho Derecha"
+msgstr "Influencia de la Luz"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "AO Channel Affect"
-msgstr "Depuración del Canal UV"
+msgstr "Influencia del Canal AO"
 
 #: scene/resources/environment.cpp
 msgid "Blur"
@@ -25750,42 +25685,40 @@ msgid "Glow"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Levels"
-msgstr "Desarrolladores"
+msgstr "Niveles"
 
 #: scene/resources/environment.cpp
 #: servers/audio/effects/audio_effect_chorus.cpp
 msgid "1"
-msgstr ""
+msgstr "1"
 
 #: scene/resources/environment.cpp
 #: servers/audio/effects/audio_effect_chorus.cpp
 msgid "2"
-msgstr ""
+msgstr "2"
 
 #: scene/resources/environment.cpp
 #: servers/audio/effects/audio_effect_chorus.cpp
-#, fuzzy
 msgid "3"
-msgstr "3D"
+msgstr "3"
 
 #: scene/resources/environment.cpp
 #: servers/audio/effects/audio_effect_chorus.cpp
 msgid "4"
-msgstr ""
+msgstr "4"
 
 #: scene/resources/environment.cpp
 msgid "5"
-msgstr ""
+msgstr "5"
 
 #: scene/resources/environment.cpp
 msgid "6"
-msgstr ""
+msgstr "6"
 
 #: scene/resources/environment.cpp
 msgid "7"
-msgstr ""
+msgstr "7"
 
 #: scene/resources/environment.cpp
 msgid "Bloom"
@@ -25800,9 +25733,8 @@ msgid "HDR Luminance Cap"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "HDR Scale"
-msgstr "Escala"
+msgstr "Escala HDR"
 
 #: scene/resources/environment.cpp
 msgid "Bicubic Upscale"
@@ -25813,9 +25745,8 @@ msgid "Adjustments"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Brightness"
-msgstr "Luz"
+msgstr "Luminosidad"
 
 #: scene/resources/environment.cpp
 msgid "Saturation"
@@ -25830,60 +25761,52 @@ msgid "Ascent"
 msgstr "Aumento"
 
 #: scene/resources/font.cpp
-#, fuzzy
 msgid "Distance Field"
-msgstr "Modo Sin Distracciones"
+msgstr "Campo de Distancia"
 
 #: scene/resources/gradient.cpp
-#, fuzzy
 msgid "Raw Data"
-msgstr "Profundidad"
+msgstr "Datos en Crudo"
 
 #: scene/resources/gradient.cpp
 msgid "Offsets"
-msgstr "Desplazamientos"
+msgstr "Offsets"
 
 #: scene/resources/height_map_shape.cpp
 msgid "Map Width"
 msgstr ""
 
 #: scene/resources/height_map_shape.cpp
-#, fuzzy
 msgid "Map Depth"
-msgstr "Profundidad"
+msgstr "Mapa de Profundidad"
 
 #: scene/resources/height_map_shape.cpp
-#, fuzzy
 msgid "Map Data"
-msgstr "Profundidad"
+msgstr "Datos del Mapa"
 
 #: scene/resources/line_shape_2d.cpp
 msgid "D"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Next Pass"
-msgstr "Siguiente Plano"
+msgstr "Siguiente Paso"
 
 #: scene/resources/material.cpp
 msgid "Use Shadow To Opacity"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Unshaded"
-msgstr "Mostrar Sin Sombreado"
+msgstr "Sin Sombreado"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Vertex Lighting"
-msgstr "Iluminación directa"
+msgstr "Iluminación de Vértices"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Use Point Size"
-msgstr "Vista Frontal"
+msgstr "Usar Tamaño del Punto"
 
 #: scene/resources/material.cpp
 msgid "World Triplanar"
@@ -25898,23 +25821,20 @@ msgid "Do Not Receive Shadows"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Disable Ambient Light"
-msgstr "Indentar a la Derecha"
+msgstr "Desactivar Luz Ambiental"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Ensure Correct Normals"
-msgstr "Transformar Normales"
+msgstr "Asegurar Normales Correctas"
 
 #: scene/resources/material.cpp
 msgid "Albedo Tex MSDF"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Vertex Color"
-msgstr "Vértice"
+msgstr "Color del Vértice"
 
 #: scene/resources/material.cpp
 msgid "Use As Albedo"
@@ -25929,39 +25849,32 @@ msgid "Parameters"
 msgstr "Parámetros"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Diffuse Mode"
-msgstr "Modo desplazamiento lateral"
+msgstr "Modo Difuso"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Specular Mode"
-msgstr "Modo de Regla"
+msgstr "Modo Especular"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Depth Draw Mode"
-msgstr "Modo de Interpolación"
+msgstr "Modo de Dibujo de Profundidad"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Line Width"
-msgstr "Ancho Izquierda"
+msgstr "Ancho de Línea"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Point Size"
-msgstr "Vista Frontal"
+msgstr "Tamaño de Punto"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Billboard Mode"
-msgstr "Modo de Regla"
+msgstr "Modo Billboard"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Billboard Keep Scale"
-msgstr "Modo de Regla"
+msgstr "Mantener Escala del Billboard"
 
 #: scene/resources/material.cpp
 msgid "Grow"
@@ -25976,19 +25889,16 @@ msgid "Use Alpha Scissor"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Particles Anim"
-msgstr "Partículas"
+msgstr "Animación de Partículas"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "H Frames"
-msgstr "Fotograma %"
+msgstr "Cuadros H"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "V Frames"
-msgstr "Fotograma %"
+msgstr "Cuadros V"
 
 #: scene/resources/material.cpp
 msgid "Albedo"
@@ -25999,14 +25909,12 @@ msgid "Metallic"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Texture Channel"
-msgstr "Región de Textura"
+msgstr "Canal de Textura"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Emission"
-msgstr "Máscara de Emisión"
+msgstr "Emisión"
 
 #: scene/resources/material.cpp
 msgid "On UV2"
@@ -26021,9 +25929,8 @@ msgid "Rim"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Clearcoat"
-msgstr "Limpiar"
+msgstr "Transparencia"
 
 #: scene/resources/material.cpp
 msgid "Gloss"
@@ -26038,32 +25945,28 @@ msgid "Flowmap"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Ambient Occlusion"
-msgstr "Oclusión"
+msgstr "Oclusión Ambiental"
 
 #: scene/resources/material.cpp
 msgid "Deep Parallax"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Min Layers"
-msgstr "Capa"
+msgstr "Capas Mínimas"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Max Layers"
-msgstr "Capa"
+msgstr "Capas Máximas"
 
 #: scene/resources/material.cpp
 msgid "Flip Tangent"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Flip Binormal"
-msgstr "Voltear Portal"
+msgstr "Voltear Binormal"
 
 #: scene/resources/material.cpp
 msgid "Subsurf Scatter"
@@ -26082,14 +25985,12 @@ msgid "Detail"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "UV Layer"
-msgstr "Capa"
+msgstr "Capa UV"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "UV1"
-msgstr "UV"
+msgstr "UV1"
 
 #: scene/resources/material.cpp
 msgid "Triplanar"
@@ -26100,42 +26001,36 @@ msgid "Triplanar Sharpness"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "UV2"
-msgstr "UV"
+msgstr "UV2"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Proximity Fade"
-msgstr "Modo de Prioridad"
+msgstr "Desvanecimiento de Proximidad"
 
 #: scene/resources/material.cpp
 msgid "Distance Fade"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Async Mode"
-msgstr "Modo desplazamiento lateral"
+msgstr "Modo Asíncrono"
 
 #: scene/resources/mesh.cpp
-#, fuzzy
 msgid "Lightmap Size Hint"
-msgstr "Calcular Lightmaps"
+msgstr "Sugerencia de Tamaño del Lightmap"
 
 #: scene/resources/mesh.cpp scene/resources/primitive_meshes.cpp
 msgid "Custom AABB"
 msgstr ""
 
 #: scene/resources/mesh_library.cpp
-#, fuzzy
 msgid "Mesh Transform"
-msgstr "Transformar"
+msgstr "Transformación de Mesh"
 
 #: scene/resources/mesh_library.cpp
-#, fuzzy
 msgid "NavMesh Transform"
-msgstr "Reestablecer Transformación"
+msgstr "Transformación de NavMesh"
 
 #: scene/resources/multimesh.cpp
 msgid "Color Format"
@@ -26150,9 +26045,8 @@ msgid "Custom Data Format"
 msgstr ""
 
 #: scene/resources/multimesh.cpp
-#, fuzzy
 msgid "Instance Count"
-msgstr "Instanciar"
+msgstr "Conteo de Instancias"
 
 #: scene/resources/multimesh.cpp
 msgid "Visible Instance Count"
@@ -26163,9 +26057,8 @@ msgid "Sampling"
 msgstr "Muestreo"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Partition Type"
-msgstr "Establecer tipo de base de variación"
+msgstr "Tipo de Partición"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Parsed Geometry Type"
@@ -26176,18 +26069,16 @@ msgid "Source Geometry Mode"
 msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Source Group Name"
-msgstr "Fuente"
+msgstr "Nombre del Grupo de Origen"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Cells"
 msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Agents"
-msgstr "Segmentos"
+msgstr "Agentes"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Max Climb"
@@ -26198,14 +26089,12 @@ msgid "Max Slope"
 msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Regions"
-msgstr "Región"
+msgstr "Regiones"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Merge Size"
-msgstr "Unir desde escena"
+msgstr "Tamaño de Unión"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Edges"
@@ -26220,9 +26109,8 @@ msgid "Verts Per Poly"
 msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Details"
-msgstr "Mostrar Por Defecto"
+msgstr "Detalles"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Sample Distance"
@@ -26245,14 +26133,12 @@ msgid "Walkable Low Height Spans"
 msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Baking AABB"
-msgstr "Generando AABB"
+msgstr "Bakear AABB"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Baking AABB Offset"
-msgstr "Desplazamiento Base"
+msgstr "Bakear Offset AABB"
 
 #: scene/resources/occluder_shape.cpp
 msgid "Spheres"
@@ -26263,14 +26149,12 @@ msgid "OccluderShapeSphere Set Spheres"
 msgstr "Establecer Esferas OccluderShapeSphere"
 
 #: scene/resources/occluder_shape_polygon.cpp
-#, fuzzy
 msgid "Polygon Points"
-msgstr "Polígonos"
+msgstr "Puntos de Polígonos"
 
 #: scene/resources/occluder_shape_polygon.cpp
-#, fuzzy
 msgid "Hole Points"
-msgstr "Mover Puntos"
+msgstr "Puntos de Rotura"
 
 #: scene/resources/packed_scene.cpp
 msgid "Bundled"
@@ -26281,9 +26165,8 @@ msgid "Trail"
 msgstr ""
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Divisor"
-msgstr "Dividir %s"
+msgstr "Divisor"
 
 #: scene/resources/particles_material.cpp
 msgid "Size Modifier"
@@ -26306,9 +26189,8 @@ msgid "Color Texture"
 msgstr "Textura de Color"
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Point Count"
-msgstr "Añadir Puerto de Entrada"
+msgstr "Conteo de Puntos"
 
 #: scene/resources/particles_material.cpp
 msgid "Scale Random"
@@ -26367,9 +26249,8 @@ msgid "Is Hemisphere"
 msgstr ""
 
 #: scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Curve Step"
-msgstr "Partir Curva"
+msgstr "Paso de Curva"
 
 #: scene/resources/ray_shape.cpp scene/resources/segment_shape_2d.cpp
 msgid "Slips On Slope"
@@ -26384,19 +26265,16 @@ msgid "Custom Solver Bias"
 msgstr ""
 
 #: scene/resources/skin.cpp
-#, fuzzy
 msgid "Bind Count"
-msgstr "Añadir Puerto de Entrada"
+msgstr "Conteo de Vinculaciones"
 
 #: scene/resources/skin.cpp
-#, fuzzy
 msgid "Bind"
 msgstr "Vinculación"
 
 #: scene/resources/skin.cpp
-#, fuzzy
 msgid "Bone"
-msgstr "Huesos"
+msgstr "Hueso"
 
 #: scene/resources/sky.cpp
 msgid "Radiance Size"
@@ -26407,9 +26285,8 @@ msgid "Panorama"
 msgstr ""
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Top Color"
-msgstr "Siguiente Plano"
+msgstr "Color Superior"
 
 #: scene/resources/sky.cpp
 msgid "Horizon Color"
@@ -26420,19 +26297,16 @@ msgid "Ground"
 msgstr "Suelo"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Bottom Color"
-msgstr "Marcadores"
+msgstr "Color Inferior"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Sun"
-msgstr "Ejecutar"
+msgstr "Sol"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Latitude"
-msgstr "Sustituir"
+msgstr "Latitud"
 
 #: scene/resources/sky.cpp
 msgid "Longitude"
@@ -26447,23 +26321,20 @@ msgid "Angle Max"
 msgstr ""
 
 #: scene/resources/style_box.cpp
-#, fuzzy
 msgid "Content Margin"
-msgstr "Asignar Margen"
+msgstr "Margen de Contenido"
 
 #: scene/resources/style_box.cpp
-#, fuzzy
 msgid "Expand Margin"
-msgstr "Expandir Todo"
+msgstr "Expandir Margen"
 
 #: scene/resources/style_box.cpp
 msgid "Skew"
 msgstr ""
 
 #: scene/resources/style_box.cpp
-#, fuzzy
 msgid "Corner Radius"
-msgstr "Cambiar Radio Interno de Torus"
+msgstr "Radio de Esquina"
 
 #: scene/resources/style_box.cpp
 msgid "Corner Detail"
@@ -26482,121 +26353,100 @@ msgid "Grow End"
 msgstr ""
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Load Path"
-msgstr "Cargar Ajuste Predeterminado"
+msgstr "Ruta de Carga"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Base Texture"
-msgstr "Eliminar Textura"
+msgstr "Textura Base"
 
 #: scene/resources/texture.cpp
 msgid "Image Size"
 msgstr "Tamaño de la Imagen"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Side"
-msgstr "Mostrar Guías"
+msgstr "Lado"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Front"
-msgstr "Vista Frontal"
+msgstr "Frente"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Back"
-msgstr "Retroceder"
+msgstr "Posterior"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Storage Mode"
-msgstr "Modo de Escalado"
+msgstr "Modo de Almacenamiento"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Lossy Storage Quality"
-msgstr "Captura"
+msgstr "Calidad de Almacenamiento con Pérdidas"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "From"
-msgstr "Rellene Desde"
+msgstr "Desde"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "To"
-msgstr "Superior"
+msgstr "A"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Base"
-msgstr "Tipo Base"
+msgstr "Base"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Current Frame"
-msgstr "Nombre de la escena actual"
+msgstr "Cuadro Actual"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Pause"
-msgstr "Modo desplazamiento lateral"
+msgstr "Pausa"
 
 #: scene/resources/texture.cpp
 msgid "Which Feed"
 msgstr ""
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Camera Is Active"
-msgstr "Respetar Mayúsculas/Minúsculas"
+msgstr "Cámara Activa"
 
 #: scene/resources/theme.cpp
-#, fuzzy
 msgid "Default Font"
-msgstr "Por defecto"
+msgstr "Fuente Predeterminada"
 
 #: scene/resources/visual_shader.cpp
 msgid "Output Port For Preview"
 msgstr ""
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Depth Draw"
-msgstr "Modo de Interpolación"
+msgstr "Dibujo de Profundidad"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Cull"
-msgstr "Modo de Regla"
+msgstr "Cull"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Diffuse"
-msgstr "Modo desplazamiento lateral"
+msgstr "Difuso"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Async"
-msgstr "Modo desplazamiento lateral"
+msgstr "Asíncrono"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Modes"
-msgstr "Modo"
+msgstr "Modos"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Input Name"
-msgstr "Mapa de Entrada"
+msgstr "Nombre de Entrada"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Uniform Name"
-msgstr "Establecer Nombre de Uniform"
+msgstr "Nombre del Uniform"
 
 #: scene/resources/visual_shader_nodes.cpp
 msgid ""
@@ -26615,85 +26465,72 @@ msgid "Invalid source for shader."
 msgstr "Fuente inválida para el shader."
 
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Texture Type"
-msgstr "Región de Textura"
+msgstr "Tipo de Textura"
 
 #: scene/resources/visual_shader_nodes.cpp
 msgid "Cube Map"
 msgstr ""
 
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Default Value Enabled"
-msgstr "Perfil de Características de Godot"
+msgstr "Valor Predeterminado Activado"
 
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Default Value"
-msgstr "Cambiar Valor de Entrada"
+msgstr "Valor Predeterminado"
 
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Color Default"
-msgstr "Cargar Valores por Defecto"
+msgstr "Color Predeterminado"
 
 #: scene/resources/visual_shader_nodes.cpp
 msgid "Invalid comparison function for that type."
 msgstr "Función de comparación inválida para este tipo."
 
 #: scene/resources/world.cpp
-#, fuzzy
 msgid "Fallback Environment"
-msgstr "Ver Entorno"
+msgstr "Entorno de Retorno"
 
 #: scene/resources/world.cpp
-#, fuzzy
 msgid "Scenario"
-msgstr "Escena"
+msgstr "Escenario"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Navigation Map"
-msgstr "Navegación"
+msgstr "Mapa de Navegación"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
 msgid "Direct Space State"
 msgstr ""
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Gravity Vector"
-msgstr "Vista Previa Por Defecto"
+msgstr "Vector de Gravedad Predeterminado"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Linear Damp"
-msgstr "Izquierda Lineal"
+msgstr "Amortiguación Lineal Predeterminada"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
 msgid "Default Angular Damp"
-msgstr ""
+msgstr "Amortiguación Angular Predeterminada"
 
 #: scene/resources/world.cpp
-#, fuzzy
 msgid "Default Map Up"
-msgstr "Escalonado de Flotantes por Defecto"
+msgstr "Mapa Superior Predeterminado"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Cell Size"
-msgstr "Vista Previa Por Defecto"
+msgstr "Vista Previa Predeterminada"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Cell Height"
-msgstr "Prueba"
+msgstr "Altura de Celda Predeterminada"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Edge Connection Margin"
-msgstr "Margen de Conexión de Bordes"
+msgstr "Margen de Conexión de Bordes Predeterminado"
 
 #: scene/resources/world_2d.cpp
 msgid "Canvas"
@@ -26704,9 +26541,8 @@ msgid "Is Primary"
 msgstr ""
 
 #: servers/arvr/arvr_interface.cpp
-#, fuzzy
 msgid "Is Initialized"
-msgstr "Inicializar"
+msgstr "Inicializado"
 
 #: servers/arvr/arvr_interface.cpp
 msgid "AR"
@@ -26717,14 +26553,12 @@ msgid "Is Anchor Detection Enabled"
 msgstr ""
 
 #: servers/arvr_server.cpp
-#, fuzzy
 msgid "Primary Interface"
-msgstr "Interfaz de usuario"
+msgstr "Interfaz Principal"
 
 #: servers/audio/audio_stream.cpp
-#, fuzzy
 msgid "Audio Stream"
-msgstr "Radio Elemento"
+msgstr "Audio Stream"
 
 #: servers/audio/audio_stream.cpp
 msgid "Random Pitch"
@@ -26766,9 +26600,8 @@ msgid "Rate Hz"
 msgstr ""
 
 #: servers/audio/effects/audio_effect_chorus.cpp
-#, fuzzy
 msgid "Depth (ms)"
-msgstr "Profundidad"
+msgstr "Profundidad (ms)"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_delay.cpp
@@ -26791,9 +26624,8 @@ msgid "Attack (µs)"
 msgstr ""
 
 #: servers/audio/effects/audio_effect_compressor.cpp
-#, fuzzy
 msgid "Release (ms)"
-msgstr "Release"
+msgstr "Release (ms)"
 
 #: servers/audio/effects/audio_effect_compressor.cpp
 msgid "Mix"
@@ -26814,14 +26646,12 @@ msgstr ""
 #: servers/audio/effects/audio_effect_delay.cpp
 #: servers/audio/effects/audio_effect_phaser.cpp
 #: servers/audio/effects/audio_effect_reverb.cpp
-#, fuzzy
 msgid "Feedback"
-msgstr "Enviar Feedback de la Documentación"
+msgstr "Feedback"
 
 #: servers/audio/effects/audio_effect_delay.cpp
-#, fuzzy
 msgid "Low-pass"
-msgstr "Omitir"
+msgstr "Paso Bajo"
 
 #: servers/audio/effects/audio_effect_distortion.cpp
 msgid "Pre Gain"
@@ -26836,14 +26666,12 @@ msgid "Drive"
 msgstr ""
 
 #: servers/audio/effects/audio_effect_distortion.cpp
-#, fuzzy
 msgid "Post Gain"
-msgstr "Posterior"
+msgstr "Ganancia Puntual"
 
 #: servers/audio/effects/audio_effect_filter.cpp
-#, fuzzy
 msgid "Resonance"
-msgstr "Recursos"
+msgstr "Resonancia"
 
 #: servers/audio/effects/audio_effect_limiter.cpp
 msgid "Ceiling dB"
@@ -26891,9 +26719,8 @@ msgid "Room Size"
 msgstr ""
 
 #: servers/audio/effects/audio_effect_reverb.cpp
-#, fuzzy
 msgid "High-pass"
-msgstr "Omitir"
+msgstr "Paso Alto"
 
 #: servers/audio/effects/audio_effect_spectrum_analyzer.cpp
 msgid "Tap Back Pos"
@@ -26912,51 +26739,44 @@ msgid "Surround"
 msgstr ""
 
 #: servers/audio_server.cpp
-#, fuzzy
 msgid "Enable Audio Input"
-msgstr "Renombrar Bus de Audio"
+msgstr "Activar Entrada de Audio"
 
 #: servers/audio_server.cpp
-#, fuzzy
 msgid "Output Latency"
-msgstr "Salida"
+msgstr "Latencia de Salida"
 
 #: servers/audio_server.cpp
 msgid "Channel Disable Threshold dB"
 msgstr ""
 
 #: servers/audio_server.cpp
-#, fuzzy
 msgid "Channel Disable Time"
-msgstr "Cambiar Tiempo de Mezcla"
+msgstr "Tiempo de Desconexión del Canal"
 
 #: servers/audio_server.cpp
 msgid "Video Delay Compensation (ms)"
 msgstr ""
 
 #: servers/audio_server.cpp
-#, fuzzy
 msgid "Bus Count"
-msgstr "Añadir Puerto de Entrada"
+msgstr "Conteo de Buses"
 
 #: servers/audio_server.cpp
-#, fuzzy
 msgid "Capture Device"
-msgstr "Capturar desde píxel"
+msgstr "Dispositivo de Captura"
 
 #: servers/audio_server.cpp
-#, fuzzy
 msgid "Global Rate Scale"
-msgstr "Variable"
+msgstr "Escala Global de Porcentajes"
 
 #: servers/camera/camera_feed.cpp
 msgid "Feed"
 msgstr ""
 
 #: servers/camera/camera_feed.cpp
-#, fuzzy
 msgid "Is Active"
-msgstr "Perspectiva"
+msgstr "Activo"
 
 #: servers/physics/space_sw.cpp servers/physics_2d/space_2d_sw.cpp
 msgid "Sleep Threshold Linear"
@@ -26983,28 +26803,24 @@ msgid "Inverse Mass"
 msgstr ""
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Inverse Inertia"
-msgstr "Vista Libre Izquierda"
+msgstr "Inercia Inversa"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Total Angular Damp"
 msgstr ""
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Total Linear Damp"
-msgstr "Lineal"
+msgstr "Amortiguación Lineal Total"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Total Gravity"
-msgstr "Vista Previa Por Defecto"
+msgstr "Gravedad Total"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Linear Velocity"
-msgstr "Inicializar"
+msgstr "Velocidad Lineal"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Exclude"
@@ -27015,9 +26831,8 @@ msgid "Shape RID"
 msgstr ""
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collide With Bodies"
-msgstr "Modo de Colisión"
+msgstr "Colisión de Cuerpos"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Collide With Areas"
@@ -27028,39 +26843,32 @@ msgid "Motion Remainder"
 msgstr ""
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Point"
-msgstr "Modo de Colisión"
+msgstr "Punto de Colisión"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Normal"
-msgstr "Modo de Colisión"
+msgstr "Colisión Normal"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Depth"
-msgstr "Modo de Colisión"
+msgstr "Profundidad de Colisión"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Safe Fraction"
-msgstr "Modo de Colisión"
+msgstr "Fracción Segura de Colisión"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Unsafe Fraction"
-msgstr "Modo de Colisión"
+msgstr "Fracción Insegura de Colisión"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Physics Engine"
-msgstr "Fotogramas de Física %"
+msgstr "Motor de Física"
 
 #: servers/physics_server.cpp
-#, fuzzy
 msgid "Center Of Mass"
-msgstr "Centro Izquierda"
+msgstr "Centro de la Masa"
 
 #: servers/physics_server.cpp
 msgid "Principal Inertia Axes"
@@ -27071,22 +26879,20 @@ msgid "Varying may not be assigned in the '%s' function."
 msgstr "No se puede asignar la variable en la función '%s'."
 
 #: servers/visual/shader_language.cpp
-#, fuzzy
 msgid ""
 "Varyings which were assigned in 'vertex' function may not be reassigned in "
 "'fragment' or 'light'."
 msgstr ""
-"Las variaciones asignadas en función 'vértice' no pueden reasignarse en "
-"'fragmento' o 'luz'."
+"Las variaciones que se asignaron en la función 'vertex'no pueden reasignarse "
+"en 'fragment' o 'light'."
 
 #: servers/visual/shader_language.cpp
-#, fuzzy
 msgid ""
 "Varyings which were assigned in 'fragment' function may not be reassigned in "
 "'vertex' or 'light'."
 msgstr ""
-"Varyings Cuál asignó en 'fragmento' la función no puede ser reasignada en "
-"'vértice' o 'ligero'."
+"Las variaciones que se asignaron en la función 'fragment' no pueden "
+"reasignarse en 'vertex' o 'light'."
 
 #: servers/visual/shader_language.cpp
 msgid "Assignment to function."
@@ -27105,48 +26911,40 @@ msgid "Spatial Partitioning"
 msgstr "Partición de Espacios"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Render Loop Enabled"
-msgstr "Filtrar señales"
+msgstr "Bucle de Renderización Activado"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "VRAM Compression"
-msgstr "Expresión"
+msgstr "Compresión VRAM"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import BPTC"
-msgstr "Importar"
+msgstr "Importar BPTC"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import S3TC"
-msgstr "Importar"
+msgstr "Importar S3TC"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import ETC"
-msgstr "Importar"
+msgstr "Importar ETC"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import ETC2"
-msgstr "Importar"
+msgstr "Importar ETC2"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import PVRTC"
-msgstr "Importar Theme"
+msgstr "Importar PVRTC"
 
 #: servers/visual_server.cpp
 msgid "Lossless Compression"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Force PNG"
-msgstr "Forzar Push"
+msgstr "Forzar PNG"
 
 #: servers/visual_server.cpp
 msgid "WebP Compression Level"
@@ -27157,9 +26955,8 @@ msgid "Time Rollover Secs"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Cubemap Size"
-msgstr "Cambiar Tamaño de Cámara"
+msgstr "Tamaño del Cubemap"
 
 #: servers/visual_server.cpp
 msgid "Quadrant 0 Subdiv"
@@ -27178,19 +26975,16 @@ msgid "Quadrant 3 Subdiv"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Shadows"
-msgstr "Shader"
+msgstr "Sombras"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Filter Mode"
-msgstr "Filtrar nodos"
+msgstr "Modo de Filtrado"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Texture Array Reflections"
-msgstr "Centrar Selección"
+msgstr "Reflejos del Array de Texturas"
 
 #: servers/visual_server.cpp
 msgid "High Quality GGX"
@@ -27201,9 +26995,8 @@ msgid "Irradiance Max Size"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Shading"
-msgstr "Relleno"
+msgstr "Sombreado"
 
 #: servers/visual_server.cpp
 msgid "Force Vertex Shading"
@@ -27222,9 +27015,8 @@ msgid "Mesh Storage"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Split Stream"
-msgstr "Partir Curva"
+msgstr "Stream Dividido"
 
 #: servers/visual_server.cpp
 msgid "Use Physical Light Attenuation"
@@ -27263,23 +27055,20 @@ msgid "Use Software Skinning"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Ninepatch Mode"
-msgstr "Modo de Interpolación"
+msgstr "Modo Ninepatch"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "OpenGL"
-msgstr "Abrir"
+msgstr "OpenGL"
 
 #: servers/visual_server.cpp
 msgid "Batching Send Null"
-msgstr ""
+msgstr "Envío de Lotes Nulo"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Batching Stream"
-msgstr "Renombrar por lote"
+msgstr "Flujo de Lotes"
 
 #: servers/visual_server.cpp
 msgid "Legacy Orphan Buffers"
@@ -27291,16 +27080,15 @@ msgstr ""
 
 #: servers/visual_server.cpp
 msgid "Batching"
-msgstr "Puesta en marcha"
+msgstr "División en Lotes"
 
 #: servers/visual_server.cpp
 msgid "Use Batching"
-msgstr ""
+msgstr "Usar División en Lotes"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Use Batching In Editor"
-msgstr "Actualización del editor"
+msgstr "Usar División en Lotes en el Editor"
 
 #: servers/visual_server.cpp
 msgid "Single Rect Fallback"
@@ -27332,12 +27120,11 @@ msgstr ""
 
 #: servers/visual_server.cpp
 msgid "Flash Batching"
-msgstr ""
+msgstr "Procesamiento Instantáneo de Lotes"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Diagnose Frame"
-msgstr "Pegar Fotograma"
+msgstr "Diagnosticar Cuadro"
 
 #: servers/visual_server.cpp
 msgid "GLES2"
@@ -27352,9 +27139,8 @@ msgid "Disable Half Float"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Enable High Float"
-msgstr "Activar Prioridad"
+msgstr "Activar Flotante Alto"
 
 #: servers/visual_server.cpp
 msgid "Precision"
@@ -27369,9 +27155,8 @@ msgid "UV Contract Amount"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Use Simple PVS"
-msgstr "Usar Ajuste de Escalado"
+msgstr "Usar PVS Simple"
 
 #: servers/visual_server.cpp
 msgid "PVS Logging"
@@ -27382,18 +27167,16 @@ msgid "Use Signals"
 msgstr "Usar Señales"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Remove Danglers"
-msgstr "Eliminar Tile"
+msgstr "Eliminar Danglers"
 
 #: servers/visual_server.cpp
 msgid "Flip Imported Portals"
 msgstr "Voltear Portales Importados"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Occlusion Culling"
-msgstr "Ver Eliminación de Oclusión"
+msgstr "Occlusion Culling"
 
 #: servers/visual_server.cpp
 msgid "Max Active Spheres"
diff --git a/editor/translations/es_AR.po b/editor/translations/es_AR.po
index 10a562d0b8..5babe4ff23 100644
--- a/editor/translations/es_AR.po
+++ b/editor/translations/es_AR.po
@@ -4584,6 +4584,7 @@ msgstr "Herramientas misceláneas a nivel proyecto o escena."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Proyecto"
 
@@ -7533,7 +7534,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15614,18 +15616,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Crear Local"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nombre de Nodo:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "El nombre ya está en uso por otra función/variable/señal:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nombre de Nodo:"
 
 #: editor/scene_tree_dock.cpp
@@ -15828,6 +15831,11 @@ msgid "Button Group"
 msgstr "Grupo de Botones"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nombre de Nodo:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Conectando Desde)"
 
@@ -15904,6 +15912,10 @@ msgstr ""
 "Nombre de nodo inválido, los siguientes caracteres no están permitidos:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Renombrar Nodo"
 
@@ -17830,6 +17842,21 @@ msgstr "Construir Solución"
 msgid "Auto Update Project"
 msgstr "Proyecto Sin Nombre"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Mostrar Todo"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Elegí un Directorio"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Elegí un Directorio"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Fin del stack trace de excepción interna"
@@ -19698,6 +19725,11 @@ msgstr "CustomNode"
 msgid "Custom BG Color"
 msgstr "CustomNode"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Expandir Todos"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20593,6 +20625,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Nombre corto de paquete inválido."
 
diff --git a/editor/translations/et.po b/editor/translations/et.po
index 3976c9f0bd..20da09ffc5 100644
--- a/editor/translations/et.po
+++ b/editor/translations/et.po
@@ -4507,6 +4507,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -7299,7 +7300,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15134,18 +15136,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Sõlme nimi:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Sõlme nimi:"
 
 #: editor/scene_tree_dock.cpp
@@ -15337,6 +15339,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Sõlme nimi:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15400,6 +15407,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17256,6 +17267,21 @@ msgstr "Poolresolutioon"
 msgid "Auto Update Project"
 msgstr "Projekt"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Kuva kõik"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Vali kataloog"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Vali kataloog"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19042,6 +19068,11 @@ msgstr "Kustuta sõlm(ed)"
 msgid "Custom BG Color"
 msgstr "Kustuta sõlm(ed)"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Laienda kõik"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19877,6 +19908,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/eu.po b/editor/translations/eu.po
index 3e69f3c4b9..c0f1953269 100644
--- a/editor/translations/eu.po
+++ b/editor/translations/eu.po
@@ -4426,6 +4426,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Proiektua"
 
@@ -7197,7 +7198,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14999,18 +15001,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Animazio berriaren izena:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Animazio berriaren izena:"
 
 #: editor/scene_tree_dock.cpp
@@ -15200,6 +15202,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Animazio berriaren izena:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15263,6 +15270,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17102,6 +17113,21 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "Proiektua"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Erakutsi guztiak"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Ireki direktorioa"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Ireki direktorioa"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18861,6 +18887,11 @@ msgstr "Funtzioak:"
 msgid "Custom BG Color"
 msgstr "Funtzioak:"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Esportatu"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19684,6 +19715,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/fa.po b/editor/translations/fa.po
index 86b847e530..186ab7264e 100644
--- a/editor/translations/fa.po
+++ b/editor/translations/fa.po
@@ -26,13 +26,18 @@
 # Seyed Fazel Alavi <fazel8195@gmail.com>, 2022.
 # Giga hertz <gigahertzyt@gmail.com>, 2022.
 # Aryan Azadeh <aryan@azadeh.email>, 2022.
+# Mitsuha Miamizu <mitsuha.miamizu4444@gmail.com>, 2022.
+# LordProfo <nimaentity30@gmail.com>, 2022.
+# LordProfo (Nima) <nimaentity30@gmail.com>, 2022.
+# John Smith <pkafsharix@gmail.com>, 2022.
+# Ali Jafari <ali.jafari.sn@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-06-20 06:44+0000\n"
-"Last-Translator: Aryan Azadeh <aryan@azadeh.email>\n"
+"PO-Revision-Date: 2022-09-09 12:36+0000\n"
+"Last-Translator: LordProfo (Nima) <nimaentity30@gmail.com>\n"
 "Language-Team: Persian <https://hosted.weblate.org/projects/godot-engine/"
 "godot/fa/>\n"
 "Language: fa\n"
@@ -40,107 +45,97 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
-msgstr ""
+msgstr "درایور تبلت"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Clipboard"
-msgstr "حافظه پنهان خالی است!"
+msgstr "کلیپ‌بورد"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Current Screen"
-msgstr "حرکت دادن گره(ها)"
+msgstr "صفحه کنونی"
 
 #: core/bind/core_bind.cpp
 msgid "Exit Code"
-msgstr ""
+msgstr "کد خروج"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "V-Sync Enabled"
-msgstr "روشن"
+msgstr "V-Sync فعال شد"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "V-Sync Via Compositor"
-msgstr ""
+msgstr "V-Sync از طریق کامپوزیتور"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Delta Smoothing"
-msgstr ""
+msgstr "هموارسازی دلتا"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Low Processor Usage Mode"
-msgstr "حالت صدور:"
+msgstr "حالت استفادهٔ کم پردازنده"
 
 #: core/bind/core_bind.cpp
 msgid "Low Processor Usage Mode Sleep (µsec)"
-msgstr ""
+msgstr "حالت خواب استفاده کم پردازنده (µsec)"
 
 #: core/bind/core_bind.cpp main/main.cpp platform/uwp/os_uwp.cpp
 msgid "Keep Screen On"
-msgstr ""
+msgstr "روشن نگه داشتن صفحه نمایش"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Min Window Size"
-msgstr "باز کردن و اجرای یک اسکریپت"
+msgstr "حداقل اندازهٔ پنجره"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Max Window Size"
-msgstr "باز کردن و اجرای یک اسکریپت"
+msgstr "حداکثر اندازهٔ پنجره"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Screen Orientation"
-msgstr "شمارش ها"
+msgstr "جهت صفحه نمایش"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp main/main.cpp
 #: platform/uwp/os_uwp.cpp
-#, fuzzy
 msgid "Window"
-msgstr "چارچوب جدید"
+msgstr "پنجره"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp
 msgid "Borderless"
-msgstr ""
+msgstr "بدون حاشیه"
 
 #: core/bind/core_bind.cpp
 msgid "Per Pixel Transparency Enabled"
-msgstr ""
+msgstr "شفافیت پیکسل به پیکسل فعال است"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp
-#, fuzzy
 msgid "Fullscreen"
 msgstr "حالت تمام صفحه"
 
 #: core/bind/core_bind.cpp
 msgid "Maximized"
-msgstr ""
+msgstr "حداکثر اندازه"
 
 #: core/bind/core_bind.cpp
 msgid "Minimized"
-msgstr ""
+msgstr "حداقل اندازه"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp scene/gui/dialogs.cpp
 #: scene/gui/graph_node.cpp
 msgid "Resizable"
-msgstr ""
+msgstr "قابل تغییر اندازه"
 
 #: core/bind/core_bind.cpp core/os/input_event.cpp scene/2d/node_2d.cpp
 #: scene/2d/physics_body_2d.cpp scene/2d/remote_transform_2d.cpp
 #: scene/3d/physics_body.cpp scene/3d/remote_transform.cpp
 #: scene/gui/control.cpp scene/gui/line_edit.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Position"
-msgstr "برداشتن موج"
+msgstr "موقعیت"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp editor/editor_settings.cpp
 #: main/main.cpp modules/gridmap/grid_map.cpp
@@ -152,61 +147,55 @@ msgstr "برداشتن موج"
 #: scene/resources/style_box.cpp scene/resources/texture.cpp
 #: scene/resources/visual_shader.cpp servers/visual_server.cpp
 msgid "Size"
-msgstr ""
+msgstr "اندازه"
 
 #: core/bind/core_bind.cpp
 msgid "Endian Swap"
-msgstr ""
+msgstr "جا‌به‌جایی اندیان"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Editor Hint"
-msgstr "ویرایشگر"
+msgstr "راهنمای ویرایشگر"
 
 #: core/bind/core_bind.cpp
 msgid "Print Error Messages"
-msgstr ""
+msgstr "چاپ کردن پیام خطا"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Iterations Per Second"
-msgstr "حالت درون یابی(درون‌یابی روشی است برای یافتن مقدار تابع درون یک بازه)"
+msgstr "تکرار در ثانیه"
 
 #: core/bind/core_bind.cpp
 msgid "Target FPS"
-msgstr ""
+msgstr "FPS هدف"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Time Scale"
-msgstr "بومی"
+msgstr "مقیاس زمانی"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Physics Jitter Fix"
-msgstr ""
+msgstr "حل لرزش فیزیک"
 
 #: core/bind/core_bind.cpp editor/plugins/version_control_editor_plugin.cpp
 msgid "Error"
-msgstr ""
+msgstr "خطا"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Error String"
-msgstr "خطا در بارگذاری:"
+msgstr "رشته خطا"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Error Line"
-msgstr "خطا در بارگذاری:"
+msgstr "خط خطا"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Result"
-msgstr "جستجوی راهنما"
+msgstr "نتیجه"
 
 #: core/command_queue_mt.cpp core/message_queue.cpp main/main.cpp
 msgid "Memory"
-msgstr ""
+msgstr "مموری"
 
 #: core/command_queue_mt.cpp core/message_queue.cpp
 #: core/register_core_types.cpp drivers/gles2/rasterizer_canvas_base_gles2.cpp
@@ -217,46 +206,43 @@ msgstr ""
 #: modules/webrtc/webrtc_data_channel.h modules/websocket/websocket_macros.h
 #: servers/visual_server.cpp
 msgid "Limits"
-msgstr ""
+msgstr "محدودیت‌ها"
 
 #: core/command_queue_mt.cpp
 msgid "Command Queue"
-msgstr ""
+msgstr "صف فرمان"
 
 #: core/command_queue_mt.cpp
 msgid "Multithreading Queue Size (KB)"
-msgstr ""
+msgstr "انداهٔ صف چند رشته‌ای (کیلوبایت)"
 
 #: core/func_ref.cpp modules/visual_script/visual_script_builtin_funcs.cpp
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_nodes.cpp
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Function"
-msgstr "توابع"
+msgstr "تابع"
 
 #: core/image.cpp core/packed_data_container.cpp scene/2d/polygon_2d.cpp
 #: scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
 msgid "Data"
-msgstr ""
+msgstr "داده"
 
 #: core/io/file_access_network.cpp core/register_core_types.cpp
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp main/main.cpp
 #: modules/gdscript/language_server/gdscript_language_server.cpp
 #: modules/webrtc/webrtc_data_channel.h modules/websocket/websocket_macros.h
 #: scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Network"
-msgstr "صدور پروژه"
+msgstr "شبکه"
 
 #: core/io/file_access_network.cpp
-#, fuzzy
 msgid "Remote FS"
-msgstr "برداشتن"
+msgstr "ریموت FS"
 
 #: core/io/file_access_network.cpp
 msgid "Page Size"
-msgstr ""
+msgstr "اندازهٔ صفحه"
 
 #: core/io/file_access_network.cpp
 msgid "Page Read Ahead"
@@ -264,81 +250,77 @@ msgstr ""
 
 #: core/io/http_client.cpp
 msgid "Blocking Mode Enabled"
-msgstr ""
+msgstr "حالت مسدود کردن فعال شد"
 
 #: core/io/http_client.cpp
-#, fuzzy
 msgid "Connection"
 msgstr "اتصال"
 
 #: core/io/http_client.cpp
+#, fuzzy
 msgid "Read Chunk Size"
-msgstr ""
+msgstr "خواندن اندازه تکه"
 
 #: core/io/marshalls.cpp
 msgid "Object ID"
-msgstr ""
+msgstr "شناسهٔ شیء"
 
 #: core/io/multiplayer_api.cpp core/io/packet_peer.cpp
 msgid "Allow Object Decoding"
-msgstr ""
+msgstr "اجازه رمزگشایی شی"
 
 #: core/io/multiplayer_api.cpp scene/main/scene_tree.cpp
 msgid "Refuse New Network Connections"
-msgstr ""
+msgstr "رد کردن اتصالات شبکه جدید"
 
 #: core/io/multiplayer_api.cpp scene/main/scene_tree.cpp
-#, fuzzy
 msgid "Network Peer"
-msgstr "صدور پروژه"
+msgstr "همتای شبکه"
 
 #: core/io/multiplayer_api.cpp scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Root Node"
-msgstr "تغییر نام"
+msgstr "نود ریشه ای"
 
 #: core/io/networked_multiplayer_peer.cpp
-#, fuzzy
 msgid "Refuse New Connections"
-msgstr "اتصال"
+msgstr "از اتصالات جدید خودداری کنید"
 
 #: core/io/networked_multiplayer_peer.cpp
-#, fuzzy
 msgid "Transfer Mode"
-msgstr "گره جابجای"
+msgstr "حالت انتقال"
 
 #: core/io/packet_peer.cpp
 msgid "Encode Buffer Max Size"
-msgstr ""
+msgstr "رمزگذاری حداکثر اندازه بافر"
 
 #: core/io/packet_peer.cpp
 msgid "Input Buffer Max Size"
-msgstr ""
+msgstr "ورود حداکثر اندازه بافر"
 
 #: core/io/packet_peer.cpp
 msgid "Output Buffer Max Size"
-msgstr ""
+msgstr "حد اکثر اندازه خروجی بافر"
 
 #: core/io/packet_peer.cpp
 msgid "Stream Peer"
-msgstr ""
+msgstr "جریان همتا"
 
 #: core/io/stream_peer.cpp
 msgid "Big Endian"
-msgstr ""
+msgstr "اندیان بزرگ"
 
 #: core/io/stream_peer.cpp
 msgid "Data Array"
-msgstr ""
+msgstr "آرایه داده"
 
 #: core/io/stream_peer_ssl.cpp
+#, fuzzy
 msgid "Blocking Handshake"
-msgstr ""
+msgstr "مسدود کردن دست دادن"
 
 #: core/io/udp_server.cpp
-#, fuzzy
 msgid "Max Pending Connections"
-msgstr "ویرایش اتصال:"
+msgstr "حداکثر اتصالات معلق"
 
 #: core/math/expression.cpp modules/gdscript/gdscript_functions.cpp
 #: modules/visual_script/visual_script_builtin_funcs.cpp
@@ -347,28 +329,27 @@ msgstr "نوع نامعتبر ورودی برای ()convert، ثوابت *_TYPE�
 
 #: core/math/expression.cpp modules/gdscript/gdscript_functions.cpp
 msgid "Expected a string of length 1 (a character)."
-msgstr "یک رشته به‌طول 1 ( یک کاراکتر) مورد انتظار است."
+msgstr "یک رشته (string) به اندازه 1 (کاراکتر) مورد انتظار است."
 
 #: core/math/expression.cpp modules/gdscript/gdscript_functions.cpp
 #: modules/mono/glue/gd_glue.cpp
 #: modules/visual_script/visual_script_builtin_funcs.cpp
 msgid "Not enough bytes for decoding bytes, or invalid format."
 msgstr ""
-"تعداد بایت های مورد نظر برای رمزگشایی بایت ها کافی نیست،‌ و یا فرمت نامعتبر "
+"تعداد بایت‌های مورد نظر برای رمزگشایی بایت‌ها کافی نیست،‌ و یا فرمت نامعتبر "
 "است ."
 
 #: core/math/expression.cpp
-#, fuzzy
 msgid "Invalid input %d (not passed) in expression"
-msgstr "ورودی نامعتبر i% (تایید نشده) در عبارت"
+msgstr "ورودی نامعتبر %d (تایید نشده) در عبارت"
 
 #: core/math/expression.cpp
 msgid "self can't be used because instance is null (not passed)"
-msgstr "از self نمی‌توان استفاده کرد زیرا نمونه صفر است (رد نشده است)"
+msgstr "از self نمی‌توان استفاده کرد زیرا نمونه null است (مقدار نگرفته است)"
 
 #: core/math/expression.cpp
 msgid "Invalid operands to operator %s, %s and %s."
-msgstr "عملگر های نامعتبر به عملگر %s, %s و %s."
+msgstr "عملوند های نامعتبر به عملگر %s, %s , %s."
 
 #: core/math/expression.cpp
 msgid "Invalid index of type %s for base type %s"
@@ -384,34 +365,32 @@ msgstr "آرگومان های نامعتبر برای ساخت '%s'"
 
 #: core/math/expression.cpp
 msgid "On call to '%s':"
-msgstr "به هنگام فراخوان تابع'%s':"
+msgstr "به هنگام فراخوان تابع '%s':"
 
 #: core/math/random_number_generator.cpp
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Seed"
-msgstr ""
+msgstr "دانه"
 
 #: core/math/random_number_generator.cpp
-#, fuzzy
 msgid "State"
-msgstr "وضعیت:"
+msgstr "وضعیت"
 
 #: core/message_queue.cpp
 msgid "Message Queue"
-msgstr ""
+msgstr "صف پیام"
 
 #: core/message_queue.cpp
 msgid "Max Size (KB)"
-msgstr ""
+msgstr "حداکثر اندازه (کیلوبایت)"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Mouse Mode"
-msgstr "انتخاب حالت"
+msgstr "حالت ماوس"
 
 #: core/os/input.cpp
 msgid "Use Accumulated Input"
-msgstr ""
+msgstr "استفاده از ورودی انباشته"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: servers/audio_server.cpp
@@ -419,105 +398,93 @@ msgid "Device"
 msgstr "دستگاه"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Alt"
-msgstr "همه"
+msgstr "آلت"
 
 #: core/os/input_event.cpp
 msgid "Shift"
-msgstr ""
+msgstr "شیفت"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Control"
-msgstr "مهار نسخه"
+msgstr "کنترل"
 
 #: core/os/input_event.cpp
 msgid "Meta"
-msgstr ""
+msgstr "متا"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Command"
-msgstr "جامعه"
+msgstr "دستور"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr "روشن"
+msgstr "فیزیکی"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Pressed"
-msgstr "بازنشانی بزرگنمایی"
+msgstr "فشرده‌شده"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Scancode"
-msgstr "پویش"
+msgstr "اسکن‌کد"
 
 #: core/os/input_event.cpp
 msgid "Physical Scancode"
-msgstr ""
+msgstr "اسکن‌کد فیزیکی"
 
 #: core/os/input_event.cpp
 msgid "Unicode"
-msgstr ""
+msgstr "یونیکد"
 
 #: core/os/input_event.cpp
 msgid "Echo"
-msgstr ""
+msgstr "اکو"
 
 #: core/os/input_event.cpp scene/gui/base_button.cpp
-#, fuzzy
 msgid "Button Mask"
-msgstr "Button"
+msgstr "ماسک دکمه"
 
 #: core/os/input_event.cpp scene/2d/node_2d.cpp scene/gui/control.cpp
-#, fuzzy
 msgid "Global Position"
-msgstr "ثابت"
+msgstr "موقعیت عمومی"
 
 #: core/os/input_event.cpp
 msgid "Factor"
-msgstr ""
+msgstr "عامل"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Button Index"
-msgstr "Button"
+msgstr "ایندکس دکمه"
 
 #: core/os/input_event.cpp
 msgid "Doubleclick"
-msgstr ""
+msgstr "دابل‌کلیک"
 
 #: core/os/input_event.cpp
 msgid "Tilt"
-msgstr ""
+msgstr "شیب"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Pressure"
-msgstr "بازنشانی بزرگنمایی"
+msgstr "فشار"
 
 #: core/os/input_event.cpp
 msgid "Pen Inverted"
-msgstr ""
+msgstr "قلم معکوس"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Relative"
-msgstr "GDNative"
+msgstr "نسبت"
 
 #: core/os/input_event.cpp scene/2d/camera_2d.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/interpolated_camera.cpp
 #: scene/animation/animation_player.cpp scene/resources/environment.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Speed"
-msgstr "بومی"
+msgstr "سرعت"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: scene/3d/sprite_3d.cpp
@@ -525,80 +492,72 @@ msgid "Axis"
 msgstr "محور"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Axis Value"
-msgstr "(مقدار)"
+msgstr "مقدار محور"
 
 #: core/os/input_event.cpp modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Index"
-msgstr "اندیس:"
+msgstr "ایندکس"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: modules/visual_script/visual_script_nodes.cpp
 #: scene/2d/touch_screen_button.cpp
-#, fuzzy
 msgid "Action"
-msgstr "افزودن وظیفه"
+msgstr "عمل"
 
 #: core/os/input_event.cpp scene/resources/environment.cpp
 #: scene/resources/material.cpp
 msgid "Strength"
-msgstr ""
+msgstr "قدرت"
 
 #: core/os/input_event.cpp
 msgid "Delta"
-msgstr ""
+msgstr "دلتا"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Channel"
-msgstr "تغییر بده"
+msgstr "کانال"
 
 #: core/os/input_event.cpp main/main.cpp
-#, fuzzy
 msgid "Message"
-msgstr "تغییر بده"
+msgstr "پیام"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Pitch"
-msgstr "سوییچ"
+msgstr ""
 
 #: core/os/input_event.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/physics_body_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/3d/physics_body.cpp scene/resources/particles_material.cpp
 msgid "Velocity"
-msgstr ""
+msgstr "سرعت"
 
 #: core/os/input_event.cpp
+#, fuzzy
 msgid "Instrument"
-msgstr ""
+msgstr "ابزار"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Controller Number"
-msgstr "شماره خط:"
+msgstr "شماره کنترلر"
 
 #: core/os/input_event.cpp
 msgid "Controller Value"
-msgstr ""
+msgstr "مقدار کنترلر"
 
 #: core/project_settings.cpp editor/editor_node.cpp main/main.cpp
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Application"
-msgstr "افزودن وظیفه"
+msgstr "اپلیکیشن"
 
 #: core/project_settings.cpp main/main.cpp
 msgid "Config"
-msgstr ""
+msgstr "پیکربندی"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Project Settings Override"
-msgstr "تنظیمات طرح…"
+msgstr "لغو تنظیمات پروژه"
 
 #: core/project_settings.cpp core/resource.cpp
 #: editor/animation_track_editor.cpp editor/editor_autoload_settings.cpp
@@ -629,7 +588,7 @@ msgstr "اجرا"
 #: core/project_settings.cpp editor/editor_node.cpp
 #: editor/run_settings_dialog.cpp main/main.cpp
 msgid "Main Scene"
-msgstr ""
+msgstr "صحنهٔ اصلی"
 
 #: core/project_settings.cpp
 #, fuzzy
@@ -643,28 +602,27 @@ msgstr "غیرفعال شده"
 
 #: core/project_settings.cpp
 msgid "Use Hidden Project Data Directory"
-msgstr ""
+msgstr "استفاده از فهرست داده‌های پروژه پنهان"
 
 #: core/project_settings.cpp
 msgid "Use Custom User Dir"
-msgstr ""
+msgstr "استفاده از Custom User Dir"
 
 #: core/project_settings.cpp
 msgid "Custom User Dir Name"
-msgstr ""
+msgstr "نام دلخواه برای دایرکتوری کاربر"
 
 #: core/project_settings.cpp main/main.cpp
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
 #: platform/uwp/os_uwp.cpp
-#, fuzzy
 msgid "Display"
-msgstr "نشان دادن همه"
+msgstr "نمایش"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/opensimplex/noise_texture.cpp scene/2d/line_2d.cpp
 #: scene/3d/label_3d.cpp scene/gui/text_edit.cpp scene/resources/texture.cpp
 msgid "Width"
-msgstr ""
+msgstr "عرض"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/gltf/gltf_node.cpp modules/opensimplex/noise_texture.cpp
@@ -673,21 +631,19 @@ msgstr ""
 #: scene/resources/font.cpp scene/resources/navigation_mesh.cpp
 #: scene/resources/primitive_meshes.cpp scene/resources/texture.cpp
 msgid "Height"
-msgstr ""
+msgstr "ارتفاع"
 
 #: core/project_settings.cpp
 msgid "Always On Top"
-msgstr ""
+msgstr "همیشه در بالا"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Test Width"
-msgstr "خطی"
+msgstr "آزمایش عرض"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Test Height"
-msgstr "آزمودن"
+msgstr "آزمایش ارتفاع"
 
 #: core/project_settings.cpp editor/animation_track_editor.cpp
 #: editor/editor_audio_buses.cpp main/main.cpp servers/audio_server.cpp
@@ -695,56 +651,54 @@ msgid "Audio"
 msgstr "صدا"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Default Bus Layout"
-msgstr "طرح پیش فرض اتوبوس را بارگیری کنید."
+msgstr "چیدمان اتوبوس پیش‌فرض"
 
 #: core/project_settings.cpp editor/editor_export.cpp
 #: editor/editor_file_system.cpp editor/editor_node.cpp
 #: editor/editor_settings.cpp editor/script_create_dialog.cpp
 #: scene/2d/camera_2d.cpp scene/3d/light.cpp scene/main/node.cpp
 msgid "Editor"
-msgstr "ویرایِشگَر"
+msgstr "ویرایشگر"
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "Main Run Args"
-msgstr ""
+msgstr "آرگومان های اصلی اجرا"
 
 #: core/project_settings.cpp
 msgid "Scene Naming"
-msgstr ""
+msgstr "نام‌گذاری صحنه"
 
 #: core/project_settings.cpp
 msgid "Search In File Extensions"
-msgstr ""
+msgstr "جستجو در پسوند فایل"
 
 #: core/project_settings.cpp
 msgid "Script Templates Search Path"
-msgstr ""
+msgstr "مسیر جستجوی الگوهای اسکریپت"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Autoload On Startup"
-msgstr "مهار نسخه"
+msgstr "بارگذاری خودکار نسخهٔ کنترل در هنگام راه‌اندازی"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Plugin Name"
-msgstr "مهار نسخه"
+msgstr "نام افزونه کنترل نسخه"
 
 #: core/project_settings.cpp scene/2d/collision_object_2d.cpp
 #: scene/3d/collision_object.cpp scene/gui/control.cpp
 msgid "Input"
-msgstr ""
+msgstr "ورودی"
 
 #: core/project_settings.cpp
 msgid "UI Accept"
-msgstr ""
+msgstr "پذیرش UI"
 
 #: core/project_settings.cpp
 #, fuzzy
 msgid "UI Select"
-msgstr "انتخاب شده را حذف کن"
+msgstr "انتخاب رابط کاربری"
 
 #: core/project_settings.cpp
 #, fuzzy
@@ -752,45 +706,46 @@ msgid "UI Cancel"
 msgstr "لغو"
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "UI Focus Next"
-msgstr ""
+msgstr "تمرکز بعدی رابط کاربری"
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "UI Focus Prev"
-msgstr ""
+msgstr "تمرکز قبلی رابط کاربری"
 
 #: core/project_settings.cpp
 msgid "UI Left"
-msgstr ""
+msgstr "کلید چپ"
 
 #: core/project_settings.cpp
 msgid "UI Right"
-msgstr ""
+msgstr "کلید راست"
 
 #: core/project_settings.cpp
 msgid "UI Up"
-msgstr ""
+msgstr "کلید بالا"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Down"
-msgstr "پایین"
+msgstr "UI پایین"
 
 #: core/project_settings.cpp
 msgid "UI Page Up"
-msgstr ""
+msgstr "کلید Page Up"
 
 #: core/project_settings.cpp
 msgid "UI Page Down"
-msgstr ""
+msgstr "کلید Page Down"
 
 #: core/project_settings.cpp
 msgid "UI Home"
-msgstr ""
+msgstr "UI خانه"
 
 #: core/project_settings.cpp
 msgid "UI End"
-msgstr ""
+msgstr "UI پایان"
 
 #: core/project_settings.cpp main/main.cpp modules/bullet/register_types.cpp
 #: modules/bullet/space_bullet.cpp scene/2d/physics_body_2d.cpp
@@ -801,7 +756,7 @@ msgstr ""
 #: servers/physics_2d/space_2d_sw.cpp servers/physics_2d_server.cpp
 #: servers/physics_server.cpp
 msgid "Physics"
-msgstr ""
+msgstr "فیزیک"
 
 #: core/project_settings.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -811,11 +766,11 @@ msgstr ""
 #: scene/3d/physics_body.cpp scene/resources/world.cpp
 #: servers/physics/space_sw.cpp servers/physics_server.cpp
 msgid "3D"
-msgstr ""
+msgstr "سه بعدی"
 
 #: core/project_settings.cpp
 msgid "Smooth Trimesh Collision"
-msgstr ""
+msgstr "برخورد روان مش مثلثی"
 
 #: core/project_settings.cpp drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles2/rasterizer_scene_gles2.cpp
@@ -827,7 +782,7 @@ msgstr ""
 #: scene/main/viewport.cpp servers/visual/visual_server_scene.cpp
 #: servers/visual_server.cpp
 msgid "Rendering"
-msgstr ""
+msgstr "رندر کردن"
 
 #: core/project_settings.cpp drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_scene_gles3.cpp
@@ -837,18 +792,17 @@ msgstr ""
 #: scene/resources/multimesh.cpp servers/visual/visual_server_scene.cpp
 #: servers/visual_server.cpp
 msgid "Quality"
-msgstr ""
+msgstr "کیفیت"
 
 #: core/project_settings.cpp scene/gui/file_dialog.cpp
 #: scene/main/scene_tree.cpp scene/resources/navigation_mesh.cpp
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Filters"
-msgstr "صافی:"
+msgstr "فیلترها"
 
 #: core/project_settings.cpp scene/main/viewport.cpp
 msgid "Sharpen Intensity"
-msgstr ""
+msgstr "تیز کردن شدت"
 
 #: core/project_settings.cpp editor/editor_export.cpp editor/editor_node.cpp
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
@@ -864,14 +818,13 @@ msgstr "اشکال یابی"
 
 #: core/project_settings.cpp main/main.cpp modules/gdscript/gdscript.cpp
 #: modules/visual_script/visual_script.cpp scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Settings"
-msgstr "ترجیحات"
+msgstr "تنظیمات"
 
 #: core/project_settings.cpp editor/script_editor_debugger.cpp main/main.cpp
 #: modules/mono/mono_gd/gd_mono.cpp
 msgid "Profiler"
-msgstr ""
+msgstr "پروفایلر"
 
 #: core/project_settings.cpp
 #, fuzzy
@@ -879,13 +832,12 @@ msgid "Max Functions"
 msgstr "تغییر نام نقش"
 
 #: core/project_settings.cpp scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Compression"
-msgstr "انتقال را در انیمیشن تغییر بده"
+msgstr "فشرده‌سازی"
 
 #: core/project_settings.cpp
 msgid "Formats"
-msgstr ""
+msgstr "فرمت‌ها"
 
 #: core/project_settings.cpp
 msgid "Zstd"
@@ -893,11 +845,11 @@ msgstr ""
 
 #: core/project_settings.cpp
 msgid "Long Distance Matching"
-msgstr ""
+msgstr "تطبیق مسافت طولانی"
 
 #: core/project_settings.cpp
 msgid "Compression Level"
-msgstr ""
+msgstr "سطح فشرده‌سازی"
 
 #: core/project_settings.cpp
 msgid "Window Log Size"
@@ -913,20 +865,19 @@ msgstr ""
 
 #: core/project_settings.cpp platform/android/export/export.cpp
 msgid "Android"
-msgstr ""
+msgstr "اندروید"
 
 #: core/project_settings.cpp
 msgid "Modules"
-msgstr ""
+msgstr "ماژول‌ها"
 
 #: core/register_core_types.cpp
 msgid "TCP"
-msgstr ""
+msgstr "تی‌سی‌پی"
 
 #: core/register_core_types.cpp
-#, fuzzy
 msgid "Connect Timeout Seconds"
-msgstr "اتصال به گره:"
+msgstr ""
 
 #: core/register_core_types.cpp
 msgid "Packet Peer Stream"
@@ -934,11 +885,11 @@ msgstr ""
 
 #: core/register_core_types.cpp
 msgid "Max Buffer (Power of 2)"
-msgstr ""
+msgstr "حداکثر بافر (به توان 2)"
 
 #: core/register_core_types.cpp editor/editor_settings.cpp main/main.cpp
 msgid "SSL"
-msgstr ""
+msgstr "SSL"
 
 #: core/register_core_types.cpp main/main.cpp
 #, fuzzy
@@ -964,22 +915,20 @@ msgid "Path"
 msgstr "آدرس"
 
 #: core/script_language.cpp
-#, fuzzy
 msgid "Source Code"
-msgstr "منبع"
+msgstr "کد منبع"
 
 #: core/translation.cpp editor/project_settings_editor.cpp
 msgid "Locale"
 msgstr "بومی"
 
 #: core/translation.cpp
-#, fuzzy
 msgid "Test"
-msgstr "آزمودن"
+msgstr "آزمایش"
 
 #: core/translation.cpp scene/resources/font.cpp
 msgid "Fallback"
-msgstr ""
+msgstr "بازگشت"
 
 #: core/ustring.cpp scene/resources/segment_shape_2d.cpp
 msgid "B"
@@ -1015,17 +964,19 @@ msgstr "اگزابایت"
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 #: drivers/gles3/rasterizer_storage_gles3.cpp modules/gltf/gltf_state.cpp
 msgid "Buffers"
-msgstr ""
+msgstr "بافرها"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+#, fuzzy
 msgid "Canvas Polygon Buffer Size (KB)"
-msgstr ""
+msgstr "اندازه بافر پرده چندضعلی (کیلوبایت)"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+#, fuzzy
 msgid "Canvas Polygon Index Buffer Size (KB)"
-msgstr ""
+msgstr "اندازه بافر شاخص پرده چندضعلی (کیلوبایت)"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp editor/editor_settings.cpp
@@ -1037,7 +988,7 @@ msgstr ""
 #: servers/physics_2d/space_2d_sw.cpp servers/physics_2d_server.cpp
 #: servers/visual_server.cpp
 msgid "2D"
-msgstr ""
+msgstr "دو بعدی"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
@@ -1047,44 +998,46 @@ msgstr "چفت:"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+#, fuzzy
 msgid "Use GPU Pixel Snap"
-msgstr ""
+msgstr "استفاده از قالب زنی پیکسل کارت گرافیک"
 
 #: drivers/gles2/rasterizer_scene_gles2.cpp
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Immediate Buffer Size (KB)"
-msgstr ""
+msgstr "اندازه بافر فوری (کیلوبایت)"
 
 #: drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_storage_gles3.cpp
+#, fuzzy
 msgid "Lightmapping"
-msgstr ""
+msgstr "نقشه برداری نور"
 
 #: drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_storage_gles3.cpp
 msgid "Use Bicubic Sampling"
-msgstr ""
+msgstr "استفاده از نمونه برداری دو مکعبی"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Max Renderable Elements"
-msgstr ""
+msgstr "حداکثر عناصر قابل اجرا"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
+#, fuzzy
 msgid "Max Renderable Lights"
-msgstr ""
+msgstr "حداکثر نور های قابل رندر"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
-#, fuzzy
 msgid "Max Renderable Reflections"
-msgstr "انتخاب شده را حذف کن"
+msgstr "حداکثر بازتاب‌های قابل رندر"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Max Lights Per Object"
-msgstr ""
+msgstr "حداکثر نور ها در هر شیء"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Subsurface Scattering"
-msgstr ""
+msgstr "پراکندگی زیر سطحی"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp editor/animation_track_editor.cpp
 #: editor/import/resource_importer_texture.cpp
@@ -1096,29 +1049,29 @@ msgstr ""
 #: scene/animation/animation_blend_tree.cpp scene/gui/control.cpp
 #: scene/main/canvas_layer.cpp scene/resources/environment.cpp
 #: scene/resources/material.cpp scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Scale"
-msgstr "بومی"
+msgstr "مقیاس"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Follow Surface"
-msgstr ""
+msgstr "دنبال کردن سطح"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Weight Samples"
-msgstr ""
+msgstr "نمونه‌های وزنی"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Voxel Cone Tracing"
-msgstr ""
+msgstr "ردیابی مخروط واکسلی"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp scene/resources/environment.cpp
 msgid "High Quality"
-msgstr ""
+msgstr "کیفیت بالا"
 
 #: drivers/gles3/rasterizer_storage_gles3.cpp
+#, fuzzy
 msgid "Blend Shape Max Buffer Size (KB)"
-msgstr ""
+msgstr "حداکثر اندازه بافر شکل ترکیبی (کیلوبایت)"
 
 #. TRANSLATORS: Adjective, refers to the mode for Bezier handles (Free, Balanced, Mirror).
 #: editor/animation_bezier_editor.cpp
@@ -1163,11 +1116,11 @@ msgstr "انتقال نقاط بِزیِر"
 
 #: editor/animation_bezier_editor.cpp editor/animation_track_editor.cpp
 msgid "Anim Duplicate Keys"
-msgstr "تکرار کلید ‌های متحرک"
+msgstr "تکرار کلیدهای متحرک"
 
 #: editor/animation_bezier_editor.cpp editor/animation_track_editor.cpp
 msgid "Anim Delete Keys"
-msgstr "حذف کلید های متحرک"
+msgstr "حذف کلیدهای متحرک"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Change Keyframe Time"
@@ -1192,67 +1145,63 @@ msgstr "تغییر فراخوان متحرک"
 #: editor/animation_track_editor.cpp scene/2d/animated_sprite.cpp
 #: scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Frame"
-msgstr "انتخاب یک گره"
+msgstr "فریم"
 
 #: editor/animation_track_editor.cpp editor/editor_profiler.cpp
 #: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
 #: scene/resources/particles_material.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "Time"
-msgstr "زمان:"
+msgstr "زمان"
 
 #: editor/animation_track_editor.cpp editor/import/resource_importer_scene.cpp
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Location"
-msgstr "بومی‌سازی"
+msgstr "مکان"
 
 #: editor/animation_track_editor.cpp modules/gltf/gltf_node.cpp
 #: scene/2d/polygon_2d.cpp scene/2d/remote_transform_2d.cpp
 #: scene/3d/remote_transform.cpp scene/3d/spatial.cpp scene/gui/control.cpp
-#, fuzzy
 msgid "Rotation"
-msgstr "وضعیت:"
+msgstr "چرخش"
 
 #: editor/animation_track_editor.cpp editor/script_editor_debugger.cpp
 #: modules/visual_script/visual_script_nodes.cpp scene/gui/range.cpp
 msgid "Value"
-msgstr ""
+msgstr "مقدار"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Arg Count"
-msgstr "افزودن عمل ورودی"
+msgstr "تعداد Arg"
 
 #: editor/animation_track_editor.cpp main/main.cpp
 #: modules/mono/mono_gd/gd_mono.cpp
 msgid "Args"
-msgstr ""
+msgstr "آرگومان‌ها"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
 #: editor/script_editor_debugger.cpp modules/gltf/gltf_accessor.cpp
 #: modules/gltf/gltf_light.cpp modules/visual_script/visual_script_nodes.cpp
 #: scene/3d/physics_body.cpp scene/resources/visual_shader_nodes.cpp
 msgid "Type"
-msgstr ""
+msgstr "تایپ"
 
 #: editor/animation_track_editor.cpp
+#, fuzzy
 msgid "In Handle"
-msgstr ""
+msgstr "دسته داخل"
 
 #: editor/animation_track_editor.cpp
 msgid "Out Handle"
-msgstr ""
+msgstr "دسته بیرون"
 
 #: editor/animation_track_editor.cpp
 #: editor/import/resource_importer_texture.cpp
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 #: scene/audio/audio_stream_player.cpp scene/gui/video_player.cpp
 msgid "Stream"
-msgstr ""
+msgstr "استریم"
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
@@ -1262,7 +1211,7 @@ msgstr "انتخاب حالت"
 #: editor/animation_track_editor.cpp
 #, fuzzy
 msgid "End Offset"
-msgstr "ساختن گره"
+msgstr "انحراف پایانی"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_scene.cpp
@@ -1275,8 +1224,9 @@ msgid "Animation"
 msgstr "انیمیشن"
 
 #: editor/animation_track_editor.cpp
+#, fuzzy
 msgid "Easing"
-msgstr ""
+msgstr "آسان کردن"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Multi Change Keyframe Time"
@@ -1313,7 +1263,7 @@ msgstr "ویژگی مسیر"
 
 #: editor/animation_track_editor.cpp
 msgid "3D Transform Track"
-msgstr "مسیر دگرشکل 3D"
+msgstr "مسیر دگرشکل سه‌بعدی"
 
 #: editor/animation_track_editor.cpp
 msgid "Call Method Track"
@@ -1321,7 +1271,7 @@ msgstr "فراخوان تابع مسیر"
 
 #: editor/animation_track_editor.cpp
 msgid "Bezier Curve Track"
-msgstr "مسیر منحنی بِزیِر"
+msgstr "مسیر منحنی Bezier"
 
 #: editor/animation_track_editor.cpp
 msgid "Audio Playback Track"
@@ -1329,19 +1279,19 @@ msgstr "مسیر Audio Playback"
 
 #: editor/animation_track_editor.cpp
 msgid "Animation Playback Track"
-msgstr "مسیر پخش Animation"
+msgstr "مسیر پخش انیمیشن"
 
 #: editor/animation_track_editor.cpp
 msgid "Animation length (frames)"
-msgstr "طول انیمیشن ( frames)"
+msgstr "طول انیمیشن (فریم)"
 
 #: editor/animation_track_editor.cpp
 msgid "Animation length (seconds)"
-msgstr "طول انیمیشن (seconds)"
+msgstr "طول انیمیشن (ثانیه)"
 
 #: editor/animation_track_editor.cpp
 msgid "Add Track"
-msgstr "ترک را اضافه کن"
+msgstr "افزودن ترک"
 
 #: editor/animation_track_editor.cpp
 msgid "Animation Looping"
@@ -1354,15 +1304,15 @@ msgstr "وظایف:"
 
 #: editor/animation_track_editor.cpp
 msgid "Audio Clips:"
-msgstr "کلیپ های صوتی:"
+msgstr "کلیپ‌های صوتی:"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Clips:"
-msgstr "کلیپ های انیمیشن:"
+msgstr "کلیپ‌های انیمیشن:"
 
 #: editor/animation_track_editor.cpp
 msgid "Change Track Path"
-msgstr "تغییرمیسر path"
+msgstr "تغییرمسیر ترک"
 
 #: editor/animation_track_editor.cpp
 msgid "Toggle this track on/off."
@@ -1370,11 +1320,11 @@ msgstr "دِگرحالتِ روشن/خاموش این قطعه."
 
 #: editor/animation_track_editor.cpp
 msgid "Update Mode (How this property is set)"
-msgstr "حالت بروزرسانی (نحوه تنظیم این ویژگی)"
+msgstr "حالت به‌روزرسانی (نحوه تنظیم این ویژگی)"
 
 #: editor/animation_track_editor.cpp scene/resources/gradient.cpp
 msgid "Interpolation Mode"
-msgstr "حالت درون یابی(درون‌یابی روشی است برای یافتن مقدار تابع درون یک بازه)"
+msgstr "حالت درون‌یابی"
 
 #: editor/animation_track_editor.cpp
 msgid "Loop Wrap Mode (Interpolate end with beginning on loop)"
@@ -1385,25 +1335,22 @@ msgid "Remove this track."
 msgstr "این ترک را حذف کن."
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Time (s):"
-msgstr "زمان(s): "
+msgstr "زمان:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Position:"
-msgstr "برداشتن موج"
+msgstr "موقعیت:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Rotation:"
-msgstr "وضعیت:"
+msgstr "چرخش:"
 
 #: editor/animation_track_editor.cpp
 #: editor/plugins/animation_tree_player_editor_plugin.cpp
 #: editor/plugins/multimesh_editor_plugin.cpp
 msgid "Scale:"
-msgstr ""
+msgstr "مقیاس:"
 
 #: editor/animation_track_editor.cpp
 #: editor/plugins/resource_preloader_editor_plugin.cpp
@@ -1411,17 +1358,15 @@ msgstr ""
 #: editor/scene_tree_editor.cpp editor/script_editor_debugger.cpp
 #: modules/visual_script/visual_script_editor.cpp
 msgid "Type:"
-msgstr ""
+msgstr "نوع:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "(Invalid, expected type: %s)"
-msgstr "نام دارایی ایندکس نامعتبر."
+msgstr "(نامعتبر, نوع مورد انتظار: %s)"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Easing:"
-msgstr "انتقال"
+msgstr "تسهیل:"
 
 #: editor/animation_track_editor.cpp
 msgid "In-Handle:"
@@ -1432,23 +1377,20 @@ msgid "Out-Handle:"
 msgstr ""
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Stream:"
-msgstr "افزودن مورد"
+msgstr "استریم"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Start (s):"
-msgstr "شروع"
+msgstr "شروع:"
 
 #: editor/animation_track_editor.cpp
 msgid "End (s):"
-msgstr ""
+msgstr "پایان(ها):"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Animation Clip:"
-msgstr "گره انیمیشن"
+msgstr "کلیپ انیمیشن:"
 
 #: editor/animation_track_editor.cpp
 msgid "Toggle Track Enabled"
@@ -1507,7 +1449,7 @@ msgstr "اضافه کردن مقدار(های) ریست"
 
 #: editor/animation_track_editor.cpp
 msgid "Delete Key(s)"
-msgstr "حذف کلید(key)"
+msgstr "حذف کلید(ها)"
 
 #: editor/animation_track_editor.cpp
 msgid "Change Animation Update Mode"
@@ -1515,11 +1457,11 @@ msgstr "تغییر حالت بروزرسانی انیمیشن"
 
 #: editor/animation_track_editor.cpp
 msgid "Change Animation Interpolation Mode"
-msgstr "تغییر حالت درون یابی(Interpolation ) انیمیشن"
+msgstr "تغییر حالت درون یابی (Interpolation) انیمیشن"
 
 #: editor/animation_track_editor.cpp
 msgid "Change Animation Loop Mode"
-msgstr "تغییر حالت تکررار (Loop) انیمیشن"
+msgstr "تغییر حالت تکرار (Loop) انیمیشن"
 
 #: editor/animation_track_editor.cpp
 msgid "Remove Anim Track"
@@ -1532,14 +1474,12 @@ msgstr "حذف ترک انیمشین"
 #: editor/plugins/tile_map_editor_plugin.cpp editor/scene_tree_dock.cpp
 #: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
 #: modules/gridmap/grid_map_editor_plugin.cpp
-#, fuzzy
 msgid "Editors"
-msgstr "ویرایشگر"
+msgstr "ویرایشگرها"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Confirm Insert Track"
-msgstr "درج ترک و کلید در انیمیشن"
+msgstr "درج آهنگ را تأیید کنید"
 
 #. TRANSLATORS: %s will be replaced by a phrase describing the target of track.
 #: editor/animation_track_editor.cpp
@@ -1561,7 +1501,7 @@ msgstr "ساختن %d قطعه جدید و درج کلیدها؟"
 #: editor/script_create_dialog.cpp
 #: modules/visual_script/visual_script_editor.cpp
 msgid "Create"
-msgstr "تولید"
+msgstr "ایجاد کردن"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Insert"
@@ -1584,7 +1524,7 @@ msgstr "انیمیشن پلیر نمی تواند خود را انیمیت کن�
 #. TRANSLATORS: This describes the target of new animation track, will be inserted into another string.
 #: editor/animation_track_editor.cpp
 msgid "property '%s'"
-msgstr "ویژگی \"٪ s\""
+msgstr "ویژگی '%s'"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Create & Insert"
@@ -1617,14 +1557,14 @@ msgid ""
 "-AudioStreamPlayer2D\n"
 "-AudioStreamPlayer3D"
 msgstr ""
-"آهنگ های صوتی فقط می توانند به گره های نوع (nodes) اشاره کنند\n"
+"آهنگ‌های صوتی فقط می‌توانند به گره‌های نوع (nodes) اشاره کنند:\n"
 "-AudioStreamPlayer\n"
 "-AudioStreamPlayer2D\n"
 "-AudioStreamPlayer3D"
 
 #: editor/animation_track_editor.cpp
 msgid "Animation tracks can only point to AnimationPlayer nodes."
-msgstr "آهنگ های انیمیشن فقط می توانند به گره های انیمش پلیر اشاره کنند."
+msgstr "آهنگ‌های انیمیشن فقط می‌توانند به گره‌های انیمیشن پلیر اشاره کنند."
 
 #: editor/animation_track_editor.cpp
 msgid "Not possible to add a new track without a root"
@@ -1632,11 +1572,11 @@ msgstr "بدون ریشه اضافه کردن مسیر امکان پذیر نی�
 
 #: editor/animation_track_editor.cpp
 msgid "Invalid track for Bezier (no suitable sub-properties)"
-msgstr "مسیر نامعتبر برای بِزیِر( زیر-خواص نامناسب)"
+msgstr "مسیر نامعتبر برای Bezier ( زیر-خواص نامناسب)"
 
 #: editor/animation_track_editor.cpp
 msgid "Add Bezier Track"
-msgstr "افزودن مسیر بِزیِر"
+msgstr "افزودن مسیر Bezier"
 
 #: editor/animation_track_editor.cpp
 msgid "Track path is invalid, so can't add a key."
@@ -1644,7 +1584,7 @@ msgstr "مسیر قطعه نامعتبر، پس نمی‌توان یک کلید
 
 #: editor/animation_track_editor.cpp
 msgid "Track is not of type Spatial, can't insert key"
-msgstr "آهنگ از نوع مکانی نیست ، نمی تواند کلید را وارد کند"
+msgstr "آهنگ از نوع مکانی نیست، نمی‌تواند کلید را وارد کند"
 
 #: editor/animation_track_editor.cpp
 msgid "Add Transform Track Key"
@@ -1652,7 +1592,7 @@ msgstr "افزودن کلید مسیر دگرشکل"
 
 #: editor/animation_track_editor.cpp
 msgid "Add Track Key"
-msgstr "افزودن کلید مسیر"
+msgstr "افزودن کلید ترک"
 
 #: editor/animation_track_editor.cpp
 msgid "Track path is invalid, so can't add a method key."
@@ -1677,7 +1617,7 @@ msgstr "کلیدها را در انیمیشن جابجا کن"
 #: servers/camera/camera_feed.cpp servers/physics_2d_server.cpp
 #: servers/physics_server.cpp
 msgid "Transform"
-msgstr ""
+msgstr "تبدیل"
 
 #: editor/animation_track_editor.cpp editor/editor_help.cpp
 msgid "Methods"
@@ -1685,7 +1625,7 @@ msgstr "روش ها"
 
 #: editor/animation_track_editor.cpp
 msgid "Bezier"
-msgstr ""
+msgstr "بزیه"
 
 #: editor/animation_track_editor.cpp
 #: modules/visual_script/visual_script_editor.cpp
@@ -2275,8 +2215,9 @@ msgid "Open"
 msgstr "باز کن"
 
 #: editor/dependency_editor.cpp
+#, fuzzy
 msgid "Owners of: %s (Total: %d)"
-msgstr ""
+msgstr "صاحبان: %s (کل: %d)"
 
 #: editor/dependency_editor.cpp
 msgid ""
@@ -2402,7 +2343,7 @@ msgstr "مؤلفان"
 
 #: editor/editor_about.cpp
 msgid "Platinum Sponsors"
-msgstr "حامیان پلاتین"
+msgstr "حامیان سطح platinum"
 
 #: editor/editor_about.cpp
 msgid "Gold Sponsors"
@@ -2418,7 +2359,7 @@ msgstr "اهداکنندگان برنزیحامیان مالی"
 
 #: editor/editor_about.cpp
 msgid "Mini Sponsors"
-msgstr "حامیان مالی کوچک"
+msgstr "حامیان سطح Mini"
 
 #: editor/editor_about.cpp
 msgid "Gold Donors"
@@ -2835,22 +2776,21 @@ msgid "Choose"
 msgstr "انتخاب کنید"
 
 #: editor/editor_export.cpp
+#, fuzzy
 msgid "Project export for platform:"
-msgstr ""
+msgstr "خروجی پروژه برای سکو:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "کپی کردن مسیر node"
+msgstr "با هشدار تکمیل شد."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed successfully."
-msgstr "بسته با موفقیت نصب شد!"
+msgstr "با موفقیت انجام شد."
 
 #: editor/editor_export.cpp
 msgid "Failed."
-msgstr ""
+msgstr "ناموفق."
 
 #: editor/editor_export.cpp
 msgid "Storing File:"
@@ -2865,45 +2805,40 @@ msgid "Packing"
 msgstr "بسته بندی"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save PCK"
-msgstr "ذخیره در"
+msgstr "ذخیره PCk"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Cannot create file \"%s\"."
-msgstr "ناتوان در ساختن پوشه."
+msgstr "نمیتوان فایل \"%s\" راساخت."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to export project files."
-msgstr "نمی‌تواند یک پوشه ایجاد شود."
+msgstr "نمیتوان از فایلهای پروژه خروجی گرفت ."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Can't open file to read from path \"%s\"."
-msgstr "ناتوان در گشودن پروژه"
+msgstr "نمیتوان فایل را از مسیر \"%s\" برای خواندن بازکرد."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save ZIP"
-msgstr "ذخیره در"
+msgstr "ذخیره ZIP"
 
 #: editor/editor_export.cpp
 msgid ""
 "Target platform requires 'ETC' texture compression for GLES2. Enable 'Import "
 "Etc' in Project Settings."
 msgstr ""
-"پلتفرم مورد نظر به فشرده سازی تکستچر 'ETC'  برای GLES2 نیاز دارد . 'واردکردن "
-"ETC' را در تنظیمات پروژه فعال کنید."
+"پلتفرم مورد نظر به فشرده سازی تکستچر 'ETC' برای GLES2 نیاز دارد . 'Import "
+"Etc' را در تنظیمات پروژه فعال کنید."
 
 #: editor/editor_export.cpp
 msgid ""
 "Target platform requires 'ETC2' texture compression for GLES3. Enable "
 "'Import Etc 2' in Project Settings."
 msgstr ""
-"پلتفرم مورد نظر به فشرده سازی تکستچر 'ETC'  برای GLES2 نیاز دارد . 'واردکردن "
-"ETC' را در تنظیمات پروژه فعال کنید."
+"پلتفرم مورد نظر به فشرده سازی تکستچر 'ETC2' برای GLES3 نیاز دارد . 'Import "
+"Etc2' را در تنظیمات پروژه فعال کنید."
 
 #: editor/editor_export.cpp
 msgid ""
@@ -2914,8 +2849,8 @@ msgid ""
 msgstr ""
 "پلتفرم هدف به فشرده‌سازی بافت 'ETC' برای بازگرداندن درایور به GLES2 نیاز "
 "دارد.\n"
-"'استخراج Etc' را در تنظیمات پروژه فعال کنید یا \"Driver Fallback Enabled\" "
-"را غیرفعال کنید."
+"'Import Etc' را در تنظیمات پروژه فعال کنید یا \"Driver Fallback Enabled\" را "
+"غیرفعال کنید."
 
 #: editor/editor_export.cpp
 msgid ""
@@ -2940,6 +2875,10 @@ msgid ""
 "Enable 'Import Pvrtc' in Project Settings, or disable 'Driver Fallback "
 "Enabled'."
 msgstr ""
+"پلت فرم هدف نیاز به فشرده سازی بافت 'PVRTC' برای بازگشت درایور به GLES2 "
+"دارد.\n"
+"\"Import Pvrtc\" را در تنظیمات پروژه فعال کنید یا \"Driver Fallback "
+"Enabled\" را غیرفعال کنید."
 
 #: editor/editor_export.cpp platform/android/export/export_plugin.cpp
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
@@ -2953,7 +2892,7 @@ msgstr "عضوها"
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
 #: platform/uwp/export/export.cpp
 msgid "Release"
-msgstr ""
+msgstr "انتشار"
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -2962,11 +2901,11 @@ msgstr "انتقال را در انیمیشن تغییر بده"
 
 #: editor/editor_export.cpp
 msgid "64 Bits"
-msgstr ""
+msgstr "۶۴ بیت"
 
 #: editor/editor_export.cpp
 msgid "Embed PCK"
-msgstr ""
+msgstr "جاسازی PCK"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
 #, fuzzy
@@ -2979,15 +2918,15 @@ msgstr ""
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
 msgid "S3TC"
-msgstr ""
+msgstr "S3TC"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
 msgid "ETC"
-msgstr ""
+msgstr "ای‌تی‌سی"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
 msgid "ETC2"
-msgstr ""
+msgstr "ای‌تی‌سی‌۲"
 
 #: editor/editor_export.cpp
 msgid "No BPTC Fallbacks"
@@ -2997,13 +2936,13 @@ msgstr ""
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp platform/uwp/export/export.cpp
 msgid "Custom debug template not found."
-msgstr ""
+msgstr "قالب اشکال زدایی سفارشی یافت نشد."
 
 #: editor/editor_export.cpp platform/android/export/export_plugin.cpp
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp platform/uwp/export/export.cpp
 msgid "Custom release template not found."
-msgstr ""
+msgstr "قالب انتشار سفارشی یافت نشد."
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -3028,15 +2967,16 @@ msgstr "نام دارایی ایندکس نامعتبر."
 #: editor/editor_export.cpp platform/windows/export/export.cpp
 #: platform/x11/export/export.cpp
 msgid "PCK Embedding"
-msgstr ""
+msgstr "تعبیه پی‌سی‌کی"
 
 #: editor/editor_export.cpp
 msgid "On 32-bit exports the embedded PCK cannot be bigger than 4 GiB."
 msgstr ""
+"در خروجی های ۳۲ بیتی پی‌سی‌کی تعبیه شده نمی‌تواند از ۴ گیگابایت بزرگ‌تر باشد."
 
 #: editor/editor_export.cpp
 msgid "Convert Text Resources To Binary On Export"
-msgstr ""
+msgstr "تبدیل منابع متنی به دوتایی هنگام خروجی"
 
 #: editor/editor_feature_profile.cpp
 msgid "3D Editor"
@@ -3053,7 +2993,7 @@ msgstr "کتابخانه دارایی"
 
 #: editor/editor_feature_profile.cpp
 msgid "Scene Tree Editing"
-msgstr ""
+msgstr "ویرایش درخت صحنه"
 
 #: editor/editor_feature_profile.cpp
 msgid "Node Dock"
@@ -3070,15 +3010,15 @@ msgstr "وارد کردن لنگرگاه"
 
 #: editor/editor_feature_profile.cpp
 msgid "Allows to view and edit 3D scenes."
-msgstr ""
+msgstr "اجازه دیدن و ویرایش صحنه های ۳ بعدی را می‌دهد."
 
 #: editor/editor_feature_profile.cpp
 msgid "Allows to edit scripts using the integrated script editor."
-msgstr ""
+msgstr "اجازهٔ ویرایش اسکریپت‌ها با استفاده از ویرایشگر اسکریپت داخلی را می‌دهد."
 
 #: editor/editor_feature_profile.cpp
 msgid "Provides built-in access to the Asset Library."
-msgstr ""
+msgstr "دسترسی داخلی به کتابخانهٔ دارایی را فراهم می‌کند."
 
 #: editor/editor_feature_profile.cpp
 msgid "Allows editing the node hierarchy in the Scene dock."
@@ -3089,32 +3029,35 @@ msgid ""
 "Allows to work with signals and groups of the node selected in the Scene "
 "dock."
 msgstr ""
+"به کار کردن با سیگنال ها و گروه ها ی گره انتخاب شده از داک صحنه اجازه میدهد."
 
 #: editor/editor_feature_profile.cpp
 msgid "Allows to browse the local file system via a dedicated dock."
-msgstr ""
+msgstr "به مرور سیستم فایل محلی از طریق یک داک اختصاصی اجازه می دهد."
 
 #: editor/editor_feature_profile.cpp
 msgid ""
 "Allows to configure import settings for individual assets. Requires the "
 "FileSystem dock to function."
 msgstr ""
+"به پیکربندی تنظیمات Import برای دارایی های فردی اجازه می دهد. برای عملکرد به "
+"داک FileSystem نیاز دارد."
 
 #: editor/editor_feature_profile.cpp
 msgid "(current)"
-msgstr ""
+msgstr "(کنونی)"
 
 #: editor/editor_feature_profile.cpp
 msgid "(none)"
-msgstr ""
+msgstr "(هیچ)"
 
 #: editor/editor_feature_profile.cpp
 msgid "Remove currently selected profile, '%s'? Cannot be undone."
-msgstr ""
+msgstr "نمایه انتخابی فعلی، '%s' حذف شود؟ قابل واگرد نیست."
 
 #: editor/editor_feature_profile.cpp
 msgid "Profile must be a valid filename and must not contain '.'"
-msgstr ""
+msgstr "پروفایل باید یک نام فایل معتبر باشد و نباید حاوی «.» باشد"
 
 #: editor/editor_feature_profile.cpp
 msgid "Profile with this name already exists."
@@ -3122,7 +3065,7 @@ msgstr "نمایه با این نام در حال حاضر وجود دارد."
 
 #: editor/editor_feature_profile.cpp
 msgid "(Editor Disabled, Properties Disabled)"
-msgstr ""
+msgstr "(ویرایشگر غیرفعال است، ویژگی‌ها غیرفعال است)"
 
 #: editor/editor_feature_profile.cpp
 msgid "(Properties Disabled)"
@@ -3141,52 +3084,48 @@ msgid "Enable Contextual Editor"
 msgstr "فعال کردن ویرایشگر متنی"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Class Properties:"
-msgstr "صافی کردن گره‌ها"
+msgstr "دارایی‌های کلاس:"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Main Features:"
-msgstr "ویژگی‌ها"
+msgstr "ویژگی‌های اصلی:"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Nodes and Classes:"
-msgstr "کلاس های فعال شده:"
+msgstr "نودها (Nodes) و کلاس‌ها:"
 
 #: editor/editor_feature_profile.cpp
 msgid "File '%s' format is invalid, import aborted."
-msgstr ""
+msgstr "فرمت فایل '%s' نامعتبر است، وارد کردن متوقف شد."
 
 #: editor/editor_feature_profile.cpp
 msgid ""
 "Profile '%s' already exists. Remove it first before importing, import "
 "aborted."
 msgstr ""
+"پروفایل '%s' از قبل وجود دارد. قبل از وارد کردن، ابتدا آن را حذف کنید، وارد "
+"کردن متوقف شد."
 
 #: editor/editor_feature_profile.cpp
 msgid "Error saving profile to path: '%s'."
 msgstr "خطای ذخیره نمایه در مسیر: '%s'."
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Reset to Default"
-msgstr "بارگیری پیش فرض"
+msgstr "بازنشانی به پیشفرض"
 
 #: editor/editor_feature_profile.cpp
 msgid "Current Profile:"
 msgstr "نمایه موجود:"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Create Profile"
-msgstr "پاک کردن نمایه"
+msgstr "ایجاد پروفایل"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Remove Profile"
-msgstr "حذف قالب"
+msgstr "حذف پروفایل"
 
 #: editor/editor_feature_profile.cpp
 msgid "Available Profiles:"
@@ -3211,18 +3150,16 @@ msgid "Export"
 msgstr "خروجی"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Configure Selected Profile:"
-msgstr "نمایه موجود:"
+msgstr "پیکربندی پروفایل انتخاب شده:"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Extra Options:"
-msgstr "گزینه‌های کلاس:"
+msgstr "گزینه‌های اضافی:"
 
 #: editor/editor_feature_profile.cpp
 msgid "Create or import a profile to edit available classes and properties."
-msgstr ""
+msgstr "یک پروفایل برای ویرایش کلاس‌ها و ویژگی‌های موجود ایجاد یا وارد کنید."
 
 #: editor/editor_feature_profile.cpp
 msgid "New profile name:"
@@ -3245,9 +3182,8 @@ msgid "Manage Editor Feature Profiles"
 msgstr "مدیریت ویژگی نمایه‌های ویرایشگر"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Default Feature Profile"
-msgstr "ویژگی نمایه Godot"
+msgstr "پروفایل ویژگی پیش‌فرض"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "Select Current Folder"
@@ -3264,7 +3200,7 @@ msgstr "برگزیدن این پوشه"
 
 #: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
 msgid "Copy Path"
-msgstr ""
+msgstr "کپی کردن مسیر"
 
 #: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
 msgid "Open in File Manager"
@@ -3281,7 +3217,7 @@ msgstr "ساختن پوشه..."
 
 #: editor/editor_file_dialog.cpp editor/find_in_files.cpp
 msgid "Refresh"
-msgstr ""
+msgstr "تازه‌سازی"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "All Recognized"
@@ -3320,14 +3256,12 @@ msgid "Save a File"
 msgstr "یک پرونده را ذخیره کن"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Access"
-msgstr "موفقیت!"
+msgstr "دسترسی"
 
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Display Mode"
-msgstr "حالت صدور:"
+msgstr "حالت نمایش"
 
 #: editor/editor_file_dialog.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -3340,71 +3274,67 @@ msgstr "حالت صدور:"
 #: scene/resources/environment.cpp scene/resources/material.cpp
 #: scene/resources/visual_shader.cpp
 #: servers/audio/effects/audio_effect_distortion.cpp
-#, fuzzy
 msgid "Mode"
-msgstr "انتخاب حالت"
+msgstr "حالت"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 #, fuzzy
 msgid "Current Dir"
-msgstr "نمایه موجود:"
+msgstr "دایرکتوری کنونی"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Current File"
-msgstr "نمایه موجود:"
+msgstr "فایل فعلی"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Current Path"
-msgstr "نمایه موجود:"
+msgstr "مسیر فعلی"
 
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp
 #: scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Show Hidden Files"
-msgstr "نمایش در فایل‌سیستم"
+msgstr "نمایش فایل‌های پنهان شده"
 
 #: editor/editor_file_dialog.cpp
 msgid "Disable Overwrite Warning"
-msgstr ""
+msgstr "غیرفعال کردن هشدار بازنویسی"
 
 #: editor/editor_file_dialog.cpp
 msgid "Go Back"
-msgstr ""
+msgstr "به عقب بازگردید"
 
 #: editor/editor_file_dialog.cpp
 msgid "Go Forward"
-msgstr ""
+msgstr "جلو بروید"
 
 #: editor/editor_file_dialog.cpp
 msgid "Go Up"
-msgstr ""
+msgstr "بالا بروید"
 
 #: editor/editor_file_dialog.cpp
 msgid "Toggle Hidden Files"
-msgstr ""
+msgstr "تغییر فایل‌های پنهان"
 
 #: editor/editor_file_dialog.cpp
 msgid "Toggle Favorite"
-msgstr ""
+msgstr "تغییر موارد دلخواه"
 
 #: editor/editor_file_dialog.cpp editor/editor_resource_picker.cpp
 #: scene/gui/base_button.cpp
 msgid "Toggle Mode"
-msgstr ""
+msgstr "تغییر حالت"
 
 #: editor/editor_file_dialog.cpp
 msgid "Focus Path"
-msgstr ""
+msgstr "مسیر تمرکز"
 
 #: editor/editor_file_dialog.cpp
 msgid "Move Favorite Up"
-msgstr ""
+msgstr "انتقال موارد دلخواه به بالا"
 
 #: editor/editor_file_dialog.cpp
 msgid "Move Favorite Down"
-msgstr ""
+msgstr "انتقال موارد دلخواه به پایین"
 
 #: editor/editor_file_dialog.cpp
 msgid "Go to previous folder."
@@ -3428,15 +3358,15 @@ msgstr "پوشه موجود (غیر)محبوب."
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "Toggle the visibility of hidden files."
-msgstr ""
+msgstr "تغییر پدیدار بودن فایل‌های مخفی شده."
 
 #: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
 msgid "View items as a grid of thumbnails."
-msgstr ""
+msgstr "دیدن موارد به صورت جدولی از پیش‌نمایش‌ها."
 
 #: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
 msgid "View items as a list."
-msgstr ""
+msgstr "مشاهده موارد به عنوان فهرست‌."
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "Directories & Files:"
@@ -3445,7 +3375,7 @@ msgstr "پوشه‌ها و پرونده‌ها:"
 #: editor/editor_file_dialog.cpp editor/plugins/sprite_editor_plugin.cpp
 #: editor/plugins/style_box_editor_plugin.cpp editor/rename_dialog.cpp
 msgid "Preview:"
-msgstr ""
+msgstr "پیش‌نمایش:"
 
 #: editor/editor_file_dialog.cpp
 #: editor/plugins/version_control_editor_plugin.cpp scene/gui/file_dialog.cpp
@@ -3454,27 +3384,30 @@ msgstr "پرونده:"
 
 #: editor/editor_file_system.cpp
 msgid "ScanSources"
-msgstr ""
+msgstr "منابع‌اسکن"
 
 #: editor/editor_file_system.cpp
 msgid ""
 "There are multiple importers for different types pointing to file %s, import "
 "aborted"
 msgstr ""
+"چندین واردکننده برای انواع مختلف وجود دارد که به فایل %s اشاره می‌کنند، وارد "
+"کردن لغو شد"
 
 #: editor/editor_file_system.cpp
 msgid "(Re)Importing Assets"
 msgstr "(در حال) وارد کردن دوباره عست ها"
 
 #: editor/editor_file_system.cpp
+#, fuzzy
 msgid "Reimport Missing Imported Files"
-msgstr ""
+msgstr "وارد کردن دوباره فایل های وارد شده ناپیدا"
 
 #: editor/editor_help.cpp scene/2d/camera_2d.cpp scene/gui/control.cpp
 #: scene/gui/nine_patch_rect.cpp scene/resources/dynamic_font.cpp
 #: scene/resources/style_box.cpp scene/resources/texture.cpp
 msgid "Top"
-msgstr ""
+msgstr "بالا"
 
 #: editor/editor_help.cpp
 msgid "Class:"
@@ -3483,7 +3416,7 @@ msgstr "کلاس:"
 #: editor/editor_help.cpp editor/scene_tree_editor.cpp
 #: editor/script_create_dialog.cpp
 msgid "Inherits:"
-msgstr "میراث:"
+msgstr "ارث می‌برد از:"
 
 #: editor/editor_help.cpp
 msgid "Inherited by:"
@@ -3491,7 +3424,7 @@ msgstr "به ارث رسیده به وسیله:"
 
 #: editor/editor_help.cpp
 msgid "Online Tutorials"
-msgstr ""
+msgstr "آموزش‌های آنلاین"
 
 #: editor/editor_help.cpp
 msgid "Properties"
@@ -3499,7 +3432,7 @@ msgstr "خصوصیات"
 
 #: editor/editor_help.cpp
 msgid "overrides %s:"
-msgstr ""
+msgstr "%s را لغو می کند:"
 
 #: editor/editor_help.cpp
 msgid "default:"
@@ -3513,7 +3446,7 @@ msgstr "خصوصیات زمینه"
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/gradient.cpp
 msgid "Colors"
-msgstr ""
+msgstr "رنگ‌ها"
 
 #: editor/editor_help.cpp editor/plugins/theme_editor_plugin.cpp
 msgid "Constants"
@@ -3521,16 +3454,16 @@ msgstr "ثابت ها"
 
 #: editor/editor_help.cpp editor/plugins/theme_editor_plugin.cpp
 msgid "Fonts"
-msgstr ""
+msgstr "فونت‌ها"
 
 #: editor/editor_help.cpp editor/plugins/theme_editor_plugin.cpp
 #: platform/iphone/export/export.cpp
 msgid "Icons"
-msgstr ""
+msgstr "آیکون‌ها"
 
 #: editor/editor_help.cpp
 msgid "Styles"
-msgstr ""
+msgstr "استایل‌ها"
 
 #: editor/editor_help.cpp
 msgid "Enumerations"
@@ -3565,9 +3498,8 @@ msgstr ""
 #: editor/plugins/script_text_editor.cpp
 #: modules/gdscript/editor/gdscript_highlighter.cpp
 #: modules/gdscript/gdscript_editor.cpp
-#, fuzzy
 msgid "Text Editor"
-msgstr "گشودن در ویرایشگر"
+msgstr "ویرایشگر متن"
 
 #: editor/editor_help.cpp editor/editor_node.cpp editor/editor_settings.cpp
 #: editor/plugins/shader_editor_plugin.cpp
@@ -3576,7 +3508,7 @@ msgstr "راهنما"
 
 #: editor/editor_help.cpp
 msgid "Sort Functions Alphabetically"
-msgstr ""
+msgstr "مرتب کردن توابع بر اساس حروف الفبا"
 
 #: editor/editor_help_search.cpp editor/editor_node.cpp
 #: editor/plugins/script_editor_plugin.cpp
@@ -3635,7 +3567,7 @@ msgstr "روش"
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "Signal"
-msgstr "سیگنال‌"
+msgstr "سیگنال"
 
 #: editor/editor_help_search.cpp modules/visual_script/visual_script_nodes.cpp
 #: scene/resources/visual_shader_nodes.cpp
@@ -3657,43 +3589,40 @@ msgstr "ویژگی:"
 
 #: editor/editor_inspector.cpp editor/editor_spin_slider.cpp
 msgid "Label"
-msgstr ""
+msgstr "برچسب"
 
 #: editor/editor_inspector.cpp editor/editor_spin_slider.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Read Only"
-msgstr "تنها روش‌ها"
+msgstr "فقط مطالعه"
 
 #: editor/editor_inspector.cpp editor/plugins/item_list_editor_plugin.cpp
 msgid "Checkable"
-msgstr ""
+msgstr "قابل بررسی"
 
 #: editor/editor_inspector.cpp editor/plugins/item_list_editor_plugin.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Checked"
-msgstr "همه‌ی انتخاب ها"
+msgstr "بررسی شده"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Draw Red"
-msgstr "فراخوانی"
+msgstr "رسم قرمز"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Keying"
-msgstr "پخش"
+msgstr "کلیدزدن"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Pin value"
-msgstr "(مقدار)"
+msgstr "مقدار سنجاق"
 
 #: editor/editor_inspector.cpp
 msgid ""
 "Pinning a value forces it to be saved even if it's equal to the default."
 msgstr ""
+"پین کردن یک مقدار آن را مجبور می کند حتی اگر برابر با مقدار پیش فرض باشد "
+"ذخیره شود."
 
 #: editor/editor_inspector.cpp
 msgid "Pin value [Disabled because '%s' is editor-only]"
@@ -3714,26 +3643,23 @@ msgstr "تعیین چندگانه:"
 
 #: editor/editor_inspector.cpp
 msgid "Pinned %s"
-msgstr ""
+msgstr "%s سنجاق شد"
 
 #: editor/editor_inspector.cpp
 msgid "Unpinned %s"
-msgstr ""
+msgstr "سنجاق %s برداشته شد"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Copy Property"
-msgstr "خصوصیات"
+msgstr "کپی کردن دارایی"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Paste Property"
-msgstr "خصوصیات"
+msgstr "چسباندن دارایی"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Copy Property Path"
-msgstr "رونوشت مسیر گره"
+msgstr "کپی کردن مسیر دارایی"
 
 #: editor/editor_log.cpp
 msgid "Output:"
@@ -3741,7 +3667,7 @@ msgstr "خروجی:"
 
 #: editor/editor_log.cpp editor/plugins/tile_map_editor_plugin.cpp
 msgid "Copy Selection"
-msgstr "کپی برگزیده"
+msgstr "کپی انتخاب"
 
 #: editor/editor_log.cpp editor/editor_network_profiler.cpp
 #: editor/editor_profiler.cpp editor/editor_resource_picker.cpp
@@ -3786,19 +3712,19 @@ msgstr "گره"
 
 #: editor/editor_network_profiler.cpp
 msgid "Incoming RPC"
-msgstr ""
+msgstr "ورودی RPC"
 
 #: editor/editor_network_profiler.cpp
 msgid "Incoming RSET"
-msgstr ""
+msgstr "ورودی RSET"
 
 #: editor/editor_network_profiler.cpp
 msgid "Outgoing RPC"
-msgstr ""
+msgstr "خروجی RPC"
 
 #: editor/editor_network_profiler.cpp
 msgid "Outgoing RSET"
-msgstr ""
+msgstr "خروجی RSET"
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 msgid "New Window"
@@ -3817,11 +3743,11 @@ msgstr ""
 
 #: editor/editor_node.cpp
 msgid "Spins when the editor window redraws."
-msgstr ""
+msgstr "هنگامی که پنجره ویرایشگر دوباره ترسیم می شود می چرخد."
 
 #: editor/editor_node.cpp
 msgid "Imported resources can't be saved."
-msgstr ""
+msgstr "منابع وارد شده را نمی‌توان ذخیره کرد."
 
 #: editor/editor_node.cpp editor/plugins/script_editor_plugin.cpp
 #: editor/plugins/theme_editor_plugin.cpp
@@ -3845,19 +3771,19 @@ msgstr "ذخیره منبع از ..."
 
 #: editor/editor_node.cpp
 msgid "Can't open file for writing:"
-msgstr ""
+msgstr "نمی‌توان فایل را برای نوشتن باز کرد:"
 
 #: editor/editor_node.cpp
 msgid "Requested file format unknown:"
-msgstr ""
+msgstr "فرمت فایل درخواست شده ناشناخته است:"
 
 #: editor/editor_node.cpp
 msgid "Error while saving."
-msgstr ""
+msgstr "خطا در هنگام ذخیره‌سازی."
 
 #: editor/editor_node.cpp editor/plugins/script_editor_plugin.cpp
 msgid "Can't open '%s'. The file could have been moved or deleted."
-msgstr ""
+msgstr "نمی‌توان %s را باز کرد. این فایل می‌تواند انتقال یافته یا حذف شده باشد."
 
 #: editor/editor_node.cpp
 msgid "Error while parsing '%s'."
@@ -3865,7 +3791,7 @@ msgstr "خطا هنگام تجزیه '%s'."
 
 #: editor/editor_node.cpp
 msgid "Unexpected end of file '%s'."
-msgstr ""
+msgstr "پایان غیر منتظرهٔ فایل '%s'."
 
 #: editor/editor_node.cpp
 msgid "Missing '%s' or its dependencies."
@@ -3885,7 +3811,7 @@ msgstr "در حال پردازش"
 
 #: editor/editor_node.cpp
 msgid "Creating Thumbnail"
-msgstr ""
+msgstr "ایجاد بند انگشتی"
 
 #: editor/editor_node.cpp
 msgid "This operation can't be done without a tree root."
@@ -3902,10 +3828,11 @@ msgid ""
 "Couldn't save scene. Likely dependencies (instances or inheritance) couldn't "
 "be satisfied."
 msgstr ""
+"صحنه ذخیره نشد. وابستگی‌های احتمالی (نمونه‌ها یا وراثت) را نمی‌توان راضی کرد."
 
 #: editor/editor_node.cpp
 msgid "Could not save one or more scenes!"
-msgstr ""
+msgstr "نمی‌توان یک یا چند صحنه را ذخیره کرد!"
 
 #: editor/editor_node.cpp
 msgid "Save All Scenes"
@@ -3913,15 +3840,15 @@ msgstr "ذخیره صحنه"
 
 #: editor/editor_node.cpp editor/scene_tree_dock.cpp
 msgid "Can't overwrite scene that is still open!"
-msgstr ""
+msgstr "نمی‌توان صحنه‌ای که هنوز باز است را بازنویسی کرد!"
 
 #: editor/editor_node.cpp
 msgid "Can't load MeshLibrary for merging!"
-msgstr ""
+msgstr "نمی‌توان MeshLibrary را برای ادغام بارگیری کرد!"
 
 #: editor/editor_node.cpp
 msgid "Error saving MeshLibrary!"
-msgstr ""
+msgstr "خطا در ذخیره MeshLibrary!"
 
 #: editor/editor_node.cpp
 msgid "Can't load TileSet for merging!"
@@ -3936,6 +3863,8 @@ msgid ""
 "An error occurred while trying to save the editor layout.\n"
 "Make sure the editor's user data path is writable."
 msgstr ""
+"هنگام تلاش برای ذخیرهٔ چیدمان ویرایشگر خطایی روی داد.\n"
+" مطمئن شوید که مسیر داده کاربر در ویرایشگر قابل نوشتن است."
 
 #: editor/editor_node.cpp
 msgid ""
@@ -3946,11 +3875,11 @@ msgstr ""
 
 #: editor/editor_node.cpp
 msgid "Layout name not found!"
-msgstr ""
+msgstr "نام چیدمان پیدا نشد!"
 
 #: editor/editor_node.cpp
 msgid "Restored the Default layout to its base settings."
-msgstr ""
+msgstr "طرح‌بندی پیش‌فرض را به تنظیمات پایه آن بازگرداند."
 
 #: editor/editor_node.cpp
 msgid ""
@@ -3970,6 +3899,8 @@ msgid ""
 "This resource was imported, so it's not editable. Change its settings in the "
 "import panel and then re-import."
 msgstr ""
+"این منبع وارد شده است، بنابراین قابل ویرایش نیست. تنظیمات آن را در پنل وارد "
+"کردن تغییر دهید و سپس دوباره وارد کنید."
 
 #: editor/editor_node.cpp
 msgid ""
@@ -3978,6 +3909,9 @@ msgid ""
 "Please read the documentation relevant to importing scenes to better "
 "understand this workflow."
 msgstr ""
+"این صحنه وارد شده است، بنابراین تغییرات در آن حفظ نخواهد شد. نمونه‌برداری یا "
+"به ارث بردن آن اجازه می‌دهد تا تغییراتی در آن ایجاد کنید. لطفاً اسناد مربوط به "
+"وارد کردن صحنه‌ها را بخوانید تا این گردش کار را بهتر درک کنید."
 
 #: editor/editor_node.cpp
 msgid ""
@@ -4541,6 +4475,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "پروژه"
 
@@ -4922,7 +4857,7 @@ msgstr "خطاهای بارگذاری"
 #: editor/editor_node.cpp editor/plugins/tile_map_editor_plugin.cpp
 #: modules/visual_script/visual_script_nodes.cpp
 msgid "Select"
-msgstr ""
+msgstr "انتخاب"
 
 #: editor/editor_node.cpp
 #, fuzzy
@@ -5089,7 +5024,7 @@ msgstr ""
 #: scene/3d/collision_object.cpp scene/3d/soft_body.cpp
 #: scene/main/canvas_layer.cpp
 msgid "Layer"
-msgstr ""
+msgstr "لایه"
 
 #: editor/editor_properties.cpp
 msgid "Bit %d, value %d"
@@ -5101,7 +5036,7 @@ msgstr ""
 
 #: editor/editor_properties.cpp editor/plugins/root_motion_editor_plugin.cpp
 msgid "Assign..."
-msgstr ""
+msgstr "واگذار کردن..."
 
 #: editor/editor_properties.cpp
 #, fuzzy
@@ -6847,7 +6782,7 @@ msgstr "تغییر نام"
 
 #: editor/filesystem_dock.cpp
 msgid "Overwrite"
-msgstr ""
+msgstr "بازنویسی"
 
 #: editor/filesystem_dock.cpp
 #, fuzzy
@@ -7445,7 +7380,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -7689,7 +7625,7 @@ msgstr ""
 
 #: editor/plugin_config_dialog.cpp
 msgid "Subfolder:"
-msgstr ""
+msgstr "زیرپوشه:"
 
 #: editor/plugin_config_dialog.cpp
 #: editor/plugins/version_control_editor_plugin.cpp
@@ -7703,7 +7639,7 @@ msgstr "نسخه:"
 
 #: editor/plugin_config_dialog.cpp editor/script_create_dialog.cpp
 msgid "Language:"
-msgstr ""
+msgstr "زبان:"
 
 #: editor/plugin_config_dialog.cpp
 #, fuzzy
@@ -7850,7 +7786,7 @@ msgstr ""
 #: editor/plugins/animation_blend_space_1d_editor.cpp
 #: editor/plugins/animation_blend_space_2d_editor.cpp
 msgid "Point"
-msgstr ""
+msgstr "نقطه"
 
 #: editor/plugins/animation_blend_space_1d_editor.cpp
 #: editor/plugins/animation_blend_space_2d_editor.cpp
@@ -8279,16 +8215,16 @@ msgstr "افزودن گره"
 
 #: editor/plugins/animation_state_machine_editor.cpp
 msgid "End"
-msgstr ""
+msgstr "پایان"
 
 #: editor/plugins/animation_state_machine_editor.cpp
 msgid "Immediate"
-msgstr ""
+msgstr "فوری"
 
 #: editor/plugins/animation_state_machine_editor.cpp
 #: scene/animation/animation_blend_tree.cpp
 msgid "Sync"
-msgstr ""
+msgstr "همگام‌سازی"
 
 #: editor/plugins/animation_state_machine_editor.cpp
 msgid "At End"
@@ -8298,7 +8234,7 @@ msgstr ""
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #: scene/3d/vehicle_body.cpp
 msgid "Travel"
-msgstr ""
+msgstr "سفر"
 
 #: editor/plugins/animation_state_machine_editor.cpp
 msgid "Start and end nodes are needed for a sub-transition."
@@ -9600,7 +9536,7 @@ msgstr ""
 
 #: editor/plugins/cpu_particles_editor_plugin.cpp
 msgid "CPUParticles"
-msgstr ""
+msgstr "ذرات سی‌پی‌یو"
 
 #: editor/plugins/cpu_particles_editor_plugin.cpp
 #: editor/plugins/particles_editor_plugin.cpp
@@ -9712,14 +9648,14 @@ msgstr "یک Breakpoint درج کن"
 #: scene/gui/rich_text_label.cpp scene/gui/text_edit.cpp
 #: scene/resources/primitive_meshes.cpp
 msgid "Text"
-msgstr ""
+msgstr "متن"
 
 #: editor/plugins/item_list_editor_plugin.cpp
 #: editor/plugins/tile_set_editor_plugin.cpp main/main.cpp
 #: platform/osx/export/export.cpp platform/windows/export/export.cpp
 #: scene/gui/button.cpp scene/gui/item_list.cpp
 msgid "Icon"
-msgstr ""
+msgstr "آیکون"
 
 #: editor/plugins/item_list_editor_plugin.cpp
 msgid "ID"
@@ -10256,7 +10192,7 @@ msgstr ""
 #: editor/plugins/visual_shader_editor_plugin.cpp editor/project_export.cpp
 #: main/main.cpp servers/visual_server.cpp
 msgid "Options"
-msgstr ""
+msgstr "گزینه ها"
 
 #: editor/plugins/path_2d_editor_plugin.cpp
 #: editor/plugins/path_editor_plugin.cpp
@@ -10408,7 +10344,7 @@ msgstr "ویرایش سیگنال"
 
 #: editor/plugins/polygon_2d_editor_plugin.cpp scene/3d/skeleton.cpp
 msgid "Bones"
-msgstr ""
+msgstr "استخوان‌ها"
 
 #: editor/plugins/polygon_2d_editor_plugin.cpp
 #, fuzzy
@@ -10467,7 +10403,7 @@ msgstr ""
 
 #: editor/plugins/polygon_2d_editor_plugin.cpp
 msgid "Radius:"
-msgstr ""
+msgstr "شعاع:"
 
 #: editor/plugins/polygon_2d_editor_plugin.cpp
 msgid "Copy Polygon to UV"
@@ -10954,7 +10890,7 @@ msgstr "منبع"
 #: editor/plugins/script_text_editor.cpp platform/uwp/export/export.cpp
 #: scene/3d/interpolated_camera.cpp scene/animation/skeleton_ik.cpp
 msgid "Target"
-msgstr ""
+msgstr "هدف"
 
 #: editor/plugins/script_text_editor.cpp
 #, fuzzy
@@ -11018,7 +10954,7 @@ msgstr ""
 #: editor/plugins/script_text_editor.cpp
 #: editor/plugins/shader_editor_plugin.cpp editor/plugins/text_editor.cpp
 msgid "Bookmarks"
-msgstr ""
+msgstr "نشانک‌ها"
 
 #: editor/plugins/script_text_editor.cpp
 #, fuzzy
@@ -11180,8 +11116,9 @@ msgid "Create Rest Pose from Bones"
 msgstr "پخش سفارشی صحنه"
 
 #: editor/plugins/skeleton_2d_editor_plugin.cpp
+#, fuzzy
 msgid "Skeleton2D"
-msgstr ""
+msgstr "اسکلت2D"
 
 #: editor/plugins/skeleton_2d_editor_plugin.cpp
 #, fuzzy
@@ -11200,7 +11137,7 @@ msgstr ""
 #: modules/gltf/gltf_node.cpp modules/gltf/gltf_skin.cpp
 #: scene/2d/polygon_2d.cpp scene/3d/mesh_instance.cpp
 msgid "Skeleton"
-msgstr ""
+msgstr "اسکلت"
 
 #: editor/plugins/skeleton_editor_plugin.cpp
 #, fuzzy
@@ -11303,7 +11240,7 @@ msgstr ""
 #: editor/plugins/texture_region_editor_plugin.cpp
 #: editor/plugins/theme_editor_plugin.cpp scene/resources/visual_shader.cpp
 msgid "None"
-msgstr ""
+msgstr "هیچکدام"
 
 #: editor/plugins/spatial_editor_plugin.cpp scene/2d/path_2d.cpp
 #, fuzzy
@@ -11695,8 +11632,9 @@ msgid "4 Viewports"
 msgstr ""
 
 #: editor/plugins/spatial_editor_plugin.cpp
+#, fuzzy
 msgid "Gizmos"
-msgstr ""
+msgstr "گیزمو‌ها"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "View Origin"
@@ -11884,7 +11822,7 @@ msgstr ""
 
 #: editor/plugins/sprite_editor_plugin.cpp
 msgid "Sprite"
-msgstr ""
+msgstr "اسپرایت"
 
 #: editor/plugins/sprite_editor_plugin.cpp
 #, fuzzy
@@ -12022,11 +11960,11 @@ msgstr "انتخاب یک گره"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Horizontal:"
-msgstr ""
+msgstr "افقی:"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Vertical:"
-msgstr ""
+msgstr "عمودی:"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 #: editor/plugins/texture_region_editor_plugin.cpp
@@ -12037,7 +11975,7 @@ msgstr "شمارش ها:"
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 #: editor/plugins/texture_region_editor_plugin.cpp
 msgid "Offset:"
-msgstr ""
+msgstr "انحراف:"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 #, fuzzy
@@ -12078,11 +12016,11 @@ msgstr ""
 
 #: editor/plugins/texture_region_editor_plugin.cpp
 msgid "Step:"
-msgstr ""
+msgstr "قدم:"
 
 #: editor/plugins/texture_region_editor_plugin.cpp
 msgid "TextureRegion"
-msgstr ""
+msgstr "ناحیه تکسچر"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Styleboxes"
@@ -12632,7 +12570,7 @@ msgstr "غیرفعال شده"
 
 #: editor/plugins/theme_editor_preview.cpp scene/resources/mesh_library.cpp
 msgid "Item"
-msgstr ""
+msgstr "مورد"
 
 #: editor/plugins/theme_editor_preview.cpp
 #, fuzzy
@@ -12663,7 +12601,7 @@ msgstr ""
 #: editor/plugins/theme_editor_preview.cpp
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Submenu"
-msgstr ""
+msgstr "زیر‌منو"
 
 #: editor/plugins/theme_editor_preview.cpp
 msgid "Subitem 1"
@@ -12675,11 +12613,11 @@ msgstr ""
 
 #: editor/plugins/theme_editor_preview.cpp
 msgid "Has"
-msgstr ""
+msgstr "دارد"
 
 #: editor/plugins/theme_editor_preview.cpp
 msgid "Many"
-msgstr ""
+msgstr "بسیاری"
 
 #: editor/plugins/theme_editor_preview.cpp
 #, fuzzy
@@ -12705,11 +12643,11 @@ msgstr "فرزند قابل ویرایش"
 
 #: editor/plugins/theme_editor_preview.cpp
 msgid "Subtree"
-msgstr ""
+msgstr "زیر‌درخت"
 
 #: editor/plugins/theme_editor_preview.cpp
 msgid "Has,Many,Options"
-msgstr ""
+msgstr "دارد،بسیار،گزینه‌ها"
 
 #: editor/plugins/theme_editor_preview.cpp
 msgid "Invalid path, the PackedScene resource was probably moved or removed."
@@ -12771,8 +12709,9 @@ msgid "Find Tile"
 msgstr "یافتن"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
+#, fuzzy
 msgid "Transpose"
-msgstr ""
+msgstr "جا‌به‌جا کردن"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
 msgid "Disable Autotile"
@@ -13611,11 +13550,11 @@ msgstr ""
 
 #: editor/plugins/visual_shader_editor_plugin.cpp
 msgid "Vector"
-msgstr ""
+msgstr "بردار"
 
 #: editor/plugins/visual_shader_editor_plugin.cpp
 msgid "Boolean"
-msgstr ""
+msgstr "بولی"
 
 #: editor/plugins/visual_shader_editor_plugin.cpp
 #, fuzzy
@@ -13715,7 +13654,7 @@ msgstr "تغییر بده"
 
 #: editor/plugins/visual_shader_editor_plugin.cpp
 msgid "Vertex"
-msgstr ""
+msgstr "رأس"
 
 #: editor/plugins/visual_shader_editor_plugin.cpp
 #, fuzzy
@@ -13725,7 +13664,7 @@ msgstr "نشانوندها:"
 #: editor/plugins/visual_shader_editor_plugin.cpp modules/gltf/gltf_node.cpp
 #: scene/3d/light.cpp
 msgid "Light"
-msgstr ""
+msgstr "نور"
 
 #: editor/plugins/visual_shader_editor_plugin.cpp
 #, fuzzy
@@ -14431,7 +14370,7 @@ msgstr ""
 
 #: editor/plugins/visual_shader_editor_plugin.cpp
 msgid "VisualShader"
-msgstr ""
+msgstr "شیدر دیداری"
 
 #: editor/plugins/visual_shader_editor_plugin.cpp
 #, fuzzy
@@ -14445,7 +14384,7 @@ msgstr "تغییر بده"
 
 #: editor/project_export.cpp
 msgid "Runnable"
-msgstr ""
+msgstr "قابل اجرا"
 
 #: editor/project_export.cpp
 msgid "Export the project for all the presets defined."
@@ -14472,11 +14411,11 @@ msgstr "صدور پروژه"
 
 #: editor/project_export.cpp
 msgid "Presets"
-msgstr ""
+msgstr "پیش فرض ها"
 
 #: editor/project_export.cpp editor/project_settings_editor.cpp
 msgid "Add..."
-msgstr ""
+msgstr "افزودن..."
 
 #: editor/project_export.cpp
 msgid ""
@@ -14490,15 +14429,15 @@ msgstr "منابع"
 
 #: editor/project_export.cpp
 msgid "Export all resources in the project"
-msgstr ""
+msgstr "صدور همه منابع در پروژه"
 
 #: editor/project_export.cpp
 msgid "Export selected scenes (and dependencies)"
-msgstr ""
+msgstr "صدور صحنه های انتخاب شده (و وابستگی ها)"
 
 #: editor/project_export.cpp
 msgid "Export selected resources (and dependencies)"
-msgstr ""
+msgstr "صدور منابع انتخاب شده (و وابستگی ها)"
 
 #: editor/project_export.cpp
 msgid "Export Mode:"
@@ -14748,8 +14687,9 @@ msgid "Project Installation Path:"
 msgstr "مسیر پروژه:"
 
 #: editor/project_manager.cpp
+#, fuzzy
 msgid "Renderer:"
-msgstr ""
+msgstr "رندرر:"
 
 #: editor/project_manager.cpp
 msgid "OpenGL ES 3.0"
@@ -15232,7 +15172,7 @@ msgstr "تنظیمات پروژه (پروژه.گودات)"
 
 #: editor/project_settings_editor.cpp editor/settings_config_dialog.cpp
 msgid "General"
-msgstr "هَمِگان"
+msgstr "عمومی"
 
 #: editor/project_settings_editor.cpp
 msgid "Override For..."
@@ -15340,11 +15280,11 @@ msgstr ""
 
 #: editor/property_editor.cpp
 msgid "File..."
-msgstr ""
+msgstr "فایل..."
 
 #: editor/property_editor.cpp
 msgid "Dir..."
-msgstr ""
+msgstr "دایرکتوری..."
 
 #: editor/property_editor.cpp
 msgid "Assign"
@@ -15405,7 +15345,7 @@ msgstr ""
 
 #: editor/rename_dialog.cpp
 msgid "Substitute"
-msgstr ""
+msgstr "جایگزین"
 
 #: editor/rename_dialog.cpp
 #, fuzzy
@@ -15453,8 +15393,9 @@ msgid "Amount by which counter is incremented for each node"
 msgstr ""
 
 #: editor/rename_dialog.cpp
+#, fuzzy
 msgid "Padding"
-msgstr ""
+msgstr "لایه گذاری"
 
 #: editor/rename_dialog.cpp
 msgid ""
@@ -15464,15 +15405,16 @@ msgstr ""
 
 #: editor/rename_dialog.cpp
 msgid "Post-Process"
-msgstr ""
+msgstr "پس-پردازش"
 
 #: editor/rename_dialog.cpp
 msgid "Style"
-msgstr ""
+msgstr "شیوه"
 
 #: editor/rename_dialog.cpp
+#, fuzzy
 msgid "Keep"
-msgstr ""
+msgstr "نگه داشتن"
 
 #: editor/rename_dialog.cpp
 msgid "PascalCase to snake_case"
@@ -15699,18 +15641,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "محلی"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "نام گره:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "نام هم‌اکنون توسط تابع/متغیر/سیگنال استفاده شده است:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "نام گره:"
 
 #: editor/scene_tree_dock.cpp
@@ -15919,6 +15862,11 @@ msgstr "دکمه"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "نام گره:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "خطای اتصال"
 
@@ -15983,6 +15931,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "تغییر نام گره"
 
@@ -17913,6 +17865,21 @@ msgstr "همه‌ی انتخاب ها"
 msgid "Auto Update Project"
 msgstr "پروژه بی نام"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "نشان دادن همه"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "یک فهرست انتخاب کنید"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "یک فهرست انتخاب کنید"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19764,6 +19731,11 @@ msgstr "ساختن گره"
 msgid "Custom BG Color"
 msgstr "ساختن گره"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "خروجی"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20610,6 +20582,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "نام نامعتبر."
@@ -28377,4 +28355,4 @@ msgstr ""
 
 #: servers/visual_server.cpp
 msgid "Shader Cache Size (MB)"
-msgstr ""
+msgstr "اندازه کش شیدر (مگابایت)"
diff --git a/editor/translations/fi.po b/editor/translations/fi.po
index db841ef48a..c560e51b01 100644
--- a/editor/translations/fi.po
+++ b/editor/translations/fi.po
@@ -4636,6 +4636,7 @@ msgstr "Sekalaiset projekti- tai kohtaustyökalut."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekti"
 
@@ -7574,7 +7575,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15634,18 +15636,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Tee paikallinen"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Solmun nimi:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Nimi on jo toisen funktion/muuttujan/signaalin käytössä:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Solmun nimi:"
 
 #: editor/scene_tree_dock.cpp
@@ -15848,6 +15851,11 @@ msgid "Button Group"
 msgstr "Painikeryhmä"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Solmun nimi:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Yhdistetään paikasta)"
 
@@ -15923,6 +15931,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Virheellinen solmun nimi, seuraavat merkit eivät ole sallittuja:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Nimeä solmu uudelleen"
 
@@ -17850,6 +17862,21 @@ msgstr "Muodosta ratkaisu"
 msgid "Auto Update Project"
 msgstr "Nimetön projekti"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Näytä kaikki"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Valitse hakemisto"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Valitse hakemisto"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Sisemmän poikkeuksen kutsupinon loppu"
@@ -19718,6 +19745,11 @@ msgstr "Mukautettu solmu"
 msgid "Custom BG Color"
 msgstr "Mukautettu solmu"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Laajenna kaikki"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20615,6 +20647,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Paketin lyhyt nimi on virheellinen."
 
diff --git a/editor/translations/fil.po b/editor/translations/fil.po
index 0a154fd6ae..e6d675f5ca 100644
--- a/editor/translations/fil.po
+++ b/editor/translations/fil.po
@@ -12,7 +12,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-05-15 09:38+0000\n"
+"PO-Revision-Date: 2022-08-30 03:11+0000\n"
 "Last-Translator: Marco Santos <enum.scima@gmail.com>\n"
 "Language-Team: Filipino <https://hosted.weblate.org/projects/godot-engine/"
 "godot/fil/>\n"
@@ -21,7 +21,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1 && n != 2 && n != 3 && (n % 10 == 4 "
 "|| n % 10 == 6 || n % 10 == 9);\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -33,7 +33,7 @@ msgstr "Clipboard"
 
 #: core/bind/core_bind.cpp
 msgid "Current Screen"
-msgstr "Kasalukuyang Screen"
+msgstr "Screen Ngayon"
 
 #: core/bind/core_bind.cpp
 msgid "Exit Code"
@@ -41,15 +41,15 @@ msgstr "Umalis sa Code"
 
 #: core/bind/core_bind.cpp
 msgid "V-Sync Enabled"
-msgstr "Binuksan ang V-Sync"
+msgstr "Nakabukas na ang V-Sync"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "V-Sync Via Compositor"
-msgstr "V-Sync Via Compositor"
+msgstr "V-Sync gamit Compositor"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Delta Smoothing"
-msgstr "Delta Smoothing"
+msgstr "Pagkinis sa Delta"
 
 #: core/bind/core_bind.cpp
 msgid "Low Processor Usage Mode"
@@ -57,7 +57,7 @@ msgstr "Mababang Paggamit sa Processor"
 
 #: core/bind/core_bind.cpp
 msgid "Low Processor Usage Mode Sleep (µsec)"
-msgstr "Mababang Paggamit sa Processor Tulog (µsec)"
+msgstr "Pagtulog ng Mababang Paggamit sa Processor (µsec)"
 
 #: core/bind/core_bind.cpp main/main.cpp platform/uwp/os_uwp.cpp
 msgid "Keep Screen On"
@@ -65,15 +65,15 @@ msgstr "Panatilihing Nakabukas ang Screen"
 
 #: core/bind/core_bind.cpp
 msgid "Min Window Size"
-msgstr "Min na Laki ng Window"
+msgstr "Min na Sukat ng Window"
 
 #: core/bind/core_bind.cpp
 msgid "Max Window Size"
-msgstr "Max na Laki ng Window"
+msgstr "Max na Sukat ng Window"
 
 #: core/bind/core_bind.cpp
 msgid "Screen Orientation"
-msgstr "Screen Orientation"
+msgstr "Orientation ng Screen"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp main/main.cpp
 #: platform/uwp/os_uwp.cpp
@@ -86,7 +86,7 @@ msgstr "Walang border"
 
 #: core/bind/core_bind.cpp
 msgid "Per Pixel Transparency Enabled"
-msgstr "Nakabukas ang Kada Pixel na Transparency"
+msgstr "Nakabukas na ang Kada Pixel na Transparency"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp
 msgid "Fullscreen"
@@ -123,7 +123,7 @@ msgstr "Posisyon"
 #: scene/resources/style_box.cpp scene/resources/texture.cpp
 #: scene/resources/visual_shader.cpp servers/visual_server.cpp
 msgid "Size"
-msgstr "Laki"
+msgstr "Sukat"
 
 #: core/bind/core_bind.cpp
 msgid "Endian Swap"
@@ -131,15 +131,15 @@ msgstr "Endian Swap"
 
 #: core/bind/core_bind.cpp
 msgid "Editor Hint"
-msgstr "Editor Hint"
+msgstr "Hint sa Editor"
 
 #: core/bind/core_bind.cpp
 msgid "Print Error Messages"
-msgstr "I-print mga Mensahe ng Error"
+msgstr "I-print ang mga Mensahe ng Error"
 
 #: core/bind/core_bind.cpp
 msgid "Iterations Per Second"
-msgstr "Ikot Kada Segundo"
+msgstr "Iteration Kada Segundo"
 
 #: core/bind/core_bind.cpp
 msgid "Target FPS"
@@ -313,9 +313,8 @@ msgid "Not enough bytes for decoding bytes, or invalid format."
 msgstr "Kulang sa bytes para i-decode ang bytes, o invalid na format."
 
 #: core/math/expression.cpp
-#, fuzzy
 msgid "Invalid input %d (not passed) in expression"
-msgstr "Invalid na input %i (di pinasa) sa expression"
+msgstr "Invalid na input na %d (di pinasa) sa expression"
 
 #: core/math/expression.cpp
 msgid "self can't be used because instance is null (not passed)"
@@ -359,13 +358,12 @@ msgid "Max Size (KB)"
 msgstr "Max na Laki (KB)"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Mouse Mode"
-msgstr "Kopya"
+msgstr "Mouse Mode"
 
 #: core/os/input.cpp
 msgid "Use Accumulated Input"
-msgstr ""
+msgstr "Gamitin ang Nakolektang Input"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: servers/audio_server.cpp
@@ -393,9 +391,8 @@ msgid "Command"
 msgstr "Command"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr "Pisika"
+msgstr "Pisikal"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
@@ -425,7 +422,7 @@ msgstr "Mask ng Button"
 
 #: core/os/input_event.cpp scene/2d/node_2d.cpp scene/gui/control.cpp
 msgid "Global Position"
-msgstr "Global na Posisyon"
+msgstr "Pandaigdigang Posisyon"
 
 #: core/os/input_event.cpp
 msgid "Factor"
@@ -441,7 +438,7 @@ msgstr "Dobleng pindot"
 
 #: core/os/input_event.cpp
 msgid "Tilt"
-msgstr "Kiling"
+msgstr "Tabingi"
 
 #: core/os/input_event.cpp
 msgid "Pressure"
@@ -449,7 +446,7 @@ msgstr "Presyur"
 
 #: core/os/input_event.cpp
 msgid "Pen Inverted"
-msgstr ""
+msgstr "Baligtad na Pen"
 
 #: core/os/input_event.cpp
 msgid "Relative"
@@ -479,7 +476,7 @@ msgstr "Index"
 #: modules/visual_script/visual_script_nodes.cpp
 #: scene/2d/touch_screen_button.cpp
 msgid "Action"
-msgstr "Gawain"
+msgstr "Kilos"
 
 #: core/os/input_event.cpp scene/resources/environment.cpp
 #: scene/resources/material.cpp
@@ -532,7 +529,7 @@ msgstr "Config"
 
 #: core/project_settings.cpp
 msgid "Project Settings Override"
-msgstr "Override sa Pagsasaayos ng Proyekto"
+msgstr "Override sa Pagsasaayos sa Proyekto"
 
 #: core/project_settings.cpp core/resource.cpp
 #: editor/animation_track_editor.cpp editor/editor_autoload_settings.cpp
@@ -575,7 +572,7 @@ msgstr "Patayin ang stderr"
 
 #: core/project_settings.cpp
 msgid "Use Hidden Project Data Directory"
-msgstr "Gamitin ang Hidden Project Data Directory"
+msgstr "Gamitin ang Nakatagong Directory ng Data ng Proyekto"
 
 #: core/project_settings.cpp
 msgid "Use Custom User Dir"
@@ -589,13 +586,13 @@ msgstr "Pangalan ng Sariling User Dir"
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
 #: platform/uwp/os_uwp.cpp
 msgid "Display"
-msgstr ""
+msgstr "Pagpapakita"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/opensimplex/noise_texture.cpp scene/2d/line_2d.cpp
 #: scene/3d/label_3d.cpp scene/gui/text_edit.cpp scene/resources/texture.cpp
 msgid "Width"
-msgstr ""
+msgstr "Lapad"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/gltf/gltf_node.cpp modules/opensimplex/noise_texture.cpp
@@ -604,19 +601,19 @@ msgstr ""
 #: scene/resources/font.cpp scene/resources/navigation_mesh.cpp
 #: scene/resources/primitive_meshes.cpp scene/resources/texture.cpp
 msgid "Height"
-msgstr ""
+msgstr "Tangkad"
 
 #: core/project_settings.cpp
 msgid "Always On Top"
-msgstr ""
+msgstr "Palaging Nasa Taas"
 
 #: core/project_settings.cpp
 msgid "Test Width"
-msgstr ""
+msgstr "Lapad ng Test"
 
 #: core/project_settings.cpp
 msgid "Test Height"
-msgstr ""
+msgstr "Tangkad ng Test"
 
 #: core/project_settings.cpp editor/animation_track_editor.cpp
 #: editor/editor_audio_buses.cpp main/main.cpp servers/audio_server.cpp
@@ -640,7 +637,7 @@ msgstr "Pangunahing Args sa Pagtakbo"
 
 #: core/project_settings.cpp
 msgid "Scene Naming"
-msgstr ""
+msgstr "Pagpangalan sa Eksena"
 
 #: core/project_settings.cpp
 msgid "Search In File Extensions"
@@ -4358,6 +4355,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7074,7 +7072,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14797,18 +14796,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Pagbago ng Haba ng Animation"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Pagbago ng Haba ng Animation"
 
 #: editor/scene_tree_dock.cpp
@@ -14998,6 +14997,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Pagbago ng Haba ng Animation"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15061,6 +15065,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16867,6 +16875,19 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "Ilipat Ang Mga Bezier Points"
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Gamitin ang Nakatagong Directory ng Data ng Proyekto"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18580,6 +18601,11 @@ msgstr "Mga Functions:"
 msgid "Custom BG Color"
 msgstr "Mga Functions:"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "3D Transform Track"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19376,6 +19402,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/fr.po b/editor/translations/fr.po
index 88c4966b54..b65ff797d7 100644
--- a/editor/translations/fr.po
+++ b/editor/translations/fr.po
@@ -102,13 +102,15 @@
 # Jérémie Guegain <mirejai@orange.fr>, 2022.
 # cwulveryck <cwulveryck@online.fr>, 2022.
 # Helix Sir <vincentbarkmann@gmail.com>, 2022.
+# SCHUTZ Lucas <lucas.schutz0954@gmail.com>, 2022.
+# EGuillemot <Elouen.Guillemot@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-08-05 01:04+0000\n"
-"Last-Translator: Helix Sir <vincentbarkmann@gmail.com>\n"
+"PO-Revision-Date: 2022-09-02 23:49+0000\n"
+"Last-Translator: DinosaurHorseSword <ewenlandry@mailfence.com>\n"
 "Language-Team: French <https://hosted.weblate.org/projects/godot-engine/"
 "godot/fr/>\n"
 "Language: fr\n"
@@ -116,7 +118,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -226,7 +228,7 @@ msgstr "Échange d'Endians"
 
 #: core/bind/core_bind.cpp
 msgid "Editor Hint"
-msgstr "Conseil(s) Éditeur"
+msgstr "Suggestion d’éditeur"
 
 #: core/bind/core_bind.cpp
 msgid "Print Error Messages"
@@ -3045,7 +3047,7 @@ msgstr "Bibliothèque d'assets"
 
 #: editor/editor_feature_profile.cpp
 msgid "Scene Tree Editing"
-msgstr "Édition de l'arbre de scène"
+msgstr "Édition d'arborescence de scène"
 
 #: editor/editor_feature_profile.cpp
 msgid "Node Dock"
@@ -3319,7 +3321,7 @@ msgstr "Accès"
 
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp
 msgid "Display Mode"
-msgstr "Mode d'Affichage"
+msgstr "Mode d'affichage"
 
 #: editor/editor_file_dialog.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -3876,7 +3878,7 @@ msgstr "Analyse"
 
 #: editor/editor_node.cpp
 msgid "Creating Thumbnail"
-msgstr "Création de l'aperçu"
+msgstr "Création de vignette"
 
 #: editor/editor_node.cpp
 msgid "This operation can't be done without a tree root."
@@ -4150,7 +4152,7 @@ msgstr "Lancer une scène rapidement…"
 
 #: editor/editor_node.cpp
 msgid "Quit"
-msgstr "Quitter"
+msgstr "Fermer"
 
 #: editor/editor_node.cpp
 msgid "Yes"
@@ -4171,13 +4173,13 @@ msgstr ""
 
 #: editor/editor_node.cpp
 msgid "Save & Quit"
-msgstr "Sauvegarder & quitter"
+msgstr "Sauvegarder & fermer"
 
 #: editor/editor_node.cpp
 msgid "Save changes to the following scene(s) before quitting?"
 msgstr ""
 "Sauvegarder les modifications sur la (les) scène(s) suivante(s) avant de "
-"quitter ?"
+"fermer ?"
 
 #: editor/editor_node.cpp
 msgid "Save changes to the following scene(s) before opening Project Manager?"
@@ -4405,7 +4407,7 @@ msgstr "Toujours fermer la sortie à l'arrêt"
 
 #: editor/editor_node.cpp
 msgid "Save On Focus Loss"
-msgstr "Enregistrer lorsque le focus est perdu"
+msgstr "Enregistrer à la perte de focus"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 msgid "Save Each Scene On Quit"
@@ -4413,7 +4415,7 @@ msgstr "Enregistrer toutes les scènes à la fermeture"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 msgid "Quit Confirmation"
-msgstr "Confirmer avant de quitter"
+msgstr "Confirmation avant la fermeture"
 
 #: editor/editor_node.cpp
 msgid "Show Update Spinner"
@@ -4421,24 +4423,23 @@ msgstr "Afficher l'indicateur d'activité"
 
 #: editor/editor_node.cpp
 msgid "Update Continuously"
-msgstr "Mettre à jour en continu"
+msgstr "Mise à jour continue"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Update Vital Only"
-msgstr "Changements de matériau"
+msgstr "Mise à jour uniquement si vital"
 
 #: editor/editor_node.cpp
 msgid "Localize Settings"
-msgstr "Traduction des réglages"
+msgstr "Traduction des paramètres"
 
 #: editor/editor_node.cpp
 msgid "Restore Scenes On Load"
-msgstr "Restaurer les scènes au chargement"
+msgstr "Rouvrir les scènes au chargement"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 msgid "Show Thumbnail On Hover"
-msgstr "Afficher l’aperçu au survol"
+msgstr "Afficher vignette au survol"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 msgid "Inspector"
@@ -4588,6 +4589,7 @@ msgstr "Outils divers liés au projet ou à la scène."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projet"
 
@@ -5045,7 +5047,7 @@ msgstr "Création des prévisualisations des maillages"
 
 #: editor/editor_plugin.cpp
 msgid "Thumbnail..."
-msgstr "Aperçu…"
+msgstr "Vignette…"
 
 #: editor/editor_plugin_settings.cpp
 msgid "Main Script:"
@@ -5339,15 +5341,15 @@ msgstr "Avez-vous oublié la méthode « _run » ?"
 
 #: editor/editor_settings.cpp
 msgid "Editor Language"
-msgstr "Langue de l'Éditeur"
+msgstr "Langue de l'éditeur"
 
 #: editor/editor_settings.cpp
 msgid "Display Scale"
-msgstr "Échelle de l'affichage"
+msgstr "Échelle d'affichage"
 
 #: editor/editor_settings.cpp
 msgid "Custom Display Scale"
-msgstr "Échelle personnalisé de l'affichage"
+msgstr "Échelle personnalisée d'affichage"
 
 #: editor/editor_settings.cpp
 msgid "Main Font Size"
@@ -5363,7 +5365,7 @@ msgstr "Police anticrénelée"
 
 #: editor/editor_settings.cpp
 msgid "Font Hinting"
-msgstr "Indication de police"
+msgstr "Optimisation de rendu de police"
 
 #: editor/editor_settings.cpp
 msgid "Main Font"
@@ -5371,11 +5373,11 @@ msgstr "Police Principale"
 
 #: editor/editor_settings.cpp
 msgid "Main Font Bold"
-msgstr "Principale police grasse"
+msgstr "Police principale en gras"
 
 #: editor/editor_settings.cpp
 msgid "Code Font"
-msgstr "Police du Code"
+msgstr "Police du code"
 
 #: editor/editor_settings.cpp
 msgid "Dim Editor On Dialog Popup"
@@ -5465,7 +5467,7 @@ msgstr "Scan auto du chemin du projet"
 
 #: editor/editor_settings.cpp
 msgid "Default Project Path"
-msgstr "Chemin du Projet par Défaut"
+msgstr "Chemin de projet par défaut"
 
 #: editor/editor_settings.cpp
 msgid "On Save"
@@ -5485,15 +5487,15 @@ msgstr "Fenêtre de sélection de fichiers"
 
 #: editor/editor_settings.cpp
 msgid "Thumbnail Size"
-msgstr "Taille de la vignette"
+msgstr "Taille de vignette"
 
 #: editor/editor_settings.cpp
 msgid "Docks"
-msgstr "S'attache"
+msgstr "Docks"
 
 #: editor/editor_settings.cpp
 msgid "Scene Tree"
-msgstr "une arborescence, arbre des scènes"
+msgstr "Arborescence de scène"
 
 #: editor/editor_settings.cpp
 msgid "Start Create Dialog Fully Expanded"
@@ -5547,7 +5549,7 @@ msgstr "Surligner les lignes à types sûrs"
 
 #: editor/editor_settings.cpp
 msgid "Indent"
-msgstr "Indenter"
+msgstr "Indentation"
 
 #: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
 msgid "Auto Indent"
@@ -5574,7 +5576,7 @@ msgstr "Navigation"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
 msgid "Smooth Scrolling"
-msgstr "Défilement Doux"
+msgstr "Défilement doux"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
 msgid "V Scroll Speed"
@@ -5606,7 +5608,7 @@ msgstr "Apparence"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
 msgid "Show Line Numbers"
-msgstr "Afficher les Numéros de Ligne"
+msgstr "Afficher les numéros de Ligne"
 
 #: editor/editor_settings.cpp
 msgid "Line Numbers Zero Padded"
@@ -5646,7 +5648,7 @@ msgstr "Colonne dure des guides de longueur de ligne"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
 msgid "Script List"
-msgstr "Liste des Scripts"
+msgstr "Liste de scripts"
 
 #: editor/editor_settings.cpp
 msgid "Show Members Overview"
@@ -5666,7 +5668,7 @@ msgstr "Intervalle entre les sauvegardes automatiques (en secondes)"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
 msgid "Restore Scripts On Load"
-msgstr "Restaurer les scripts au chargement"
+msgstr "Rouvrir les scripts au chargement"
 
 #: editor/editor_settings.cpp
 msgid "Auto Reload And Parse Scripts On Save"
@@ -5717,7 +5719,7 @@ msgstr "Complétion"
 
 #: editor/editor_settings.cpp
 msgid "Idle Parse Delay"
-msgstr ""
+msgstr "Délai du traitement passif"
 
 #: editor/editor_settings.cpp
 msgid "Auto Brace Complete"
@@ -5757,11 +5759,11 @@ msgstr "Taille de la police de l'aide"
 
 #: editor/editor_settings.cpp
 msgid "Help Source Font Size"
-msgstr "Taille de la police de l'aide de la source"
+msgstr "Taille de police d'origine de l'aide"
 
 #: editor/editor_settings.cpp
 msgid "Help Title Font Size"
-msgstr "Taille de la police du titre Aide"
+msgstr "Taille de police du titre de l'aide"
 
 #: editor/editor_settings.cpp modules/gridmap/grid_map_editor_plugin.cpp
 msgid "Grid Map"
@@ -5773,7 +5775,7 @@ msgstr "Choisissez la distance"
 
 #: editor/editor_settings.cpp editor/plugins/tile_map_editor_plugin.cpp
 msgid "Preview Size"
-msgstr "Aperçu de la taille"
+msgstr "Taille d'aperçu"
 
 #: editor/editor_settings.cpp
 msgid "Primary Grid Color"
@@ -5821,7 +5823,7 @@ msgstr "Pas de la grille principale"
 
 #: editor/editor_settings.cpp
 msgid "Grid Size"
-msgstr "Taille de la Grille"
+msgstr "Taille de la grille"
 
 #: editor/editor_settings.cpp
 msgid "Grid Division Level Max"
@@ -5833,7 +5835,7 @@ msgstr "Niveau minimal de division de la grille"
 
 #: editor/editor_settings.cpp
 msgid "Grid Division Level Bias"
-msgstr "Niveau de biais de la division de grille"
+msgstr "Niveau de biais de division de la grille"
 
 #: editor/editor_settings.cpp
 msgid "Grid XZ Plane"
@@ -5877,11 +5879,11 @@ msgstr "Inverser l'axe X"
 
 #: editor/editor_settings.cpp
 msgid "Zoom Style"
-msgstr "Style de Zoom"
+msgstr "Style de zoom"
 
 #: editor/editor_settings.cpp
 msgid "Emulate Numpad"
-msgstr "Émuler un pavé numérique"
+msgstr "Émuler pavé numérique"
 
 #: editor/editor_settings.cpp
 msgid "Emulate 3 Button Mouse"
@@ -5889,24 +5891,23 @@ msgstr "Émuler souris à 3 boutons"
 
 #: editor/editor_settings.cpp
 msgid "Orbit Modifier"
-msgstr "Modificateur d'orbite"
+msgstr "Touche de combinaison : Orbite"
 
 #: editor/editor_settings.cpp
 msgid "Pan Modifier"
-msgstr "Modificateur panoramique"
+msgstr "Touche de combinaison : Panoramique"
 
 #: editor/editor_settings.cpp
 msgid "Zoom Modifier"
-msgstr "Multiplicateur de Zoom"
+msgstr "Touche de combinaison : Zoom"
 
 #: editor/editor_settings.cpp editor/plugins/spatial_editor_plugin.cpp
 msgid "Warped Mouse Panning"
 msgstr ""
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Navigation Feel"
-msgstr "Mode Navigation"
+msgstr "Préférences de navigation"
 
 #: editor/editor_settings.cpp
 msgid "Orbit Sensitivity"
@@ -5914,15 +5915,15 @@ msgstr "Sensibilité de l'orbite"
 
 #: editor/editor_settings.cpp
 msgid "Orbit Inertia"
-msgstr "Inertie de l'orbite"
+msgstr "Inertie d'orbite"
 
 #: editor/editor_settings.cpp
 msgid "Translation Inertia"
-msgstr "Inertie de la Translation"
+msgstr "Inertie de la translation"
 
 #: editor/editor_settings.cpp
 msgid "Zoom Inertia"
-msgstr "Inertie du Zoom"
+msgstr "Inertie du zoom"
 
 #: editor/editor_settings.cpp
 msgid "Freelook"
@@ -5946,7 +5947,7 @@ msgstr "Vitesse de base de la vue libre"
 
 #: editor/editor_settings.cpp
 msgid "Freelook Activation Modifier"
-msgstr "Modificateur d'activation de la vue libre"
+msgstr "Touche de combinaison : Activation vue libre"
 
 #: editor/editor_settings.cpp
 msgid "Freelook Speed Zoom Link"
@@ -5954,7 +5955,7 @@ msgstr "Lien de zoom rapide de la vue libre"
 
 #: editor/editor_settings.cpp editor/plugins/tile_map_editor_plugin.cpp
 msgid "Grid Color"
-msgstr "Couleur de la Grille"
+msgstr "Couleur de la grille"
 
 #: editor/editor_settings.cpp
 msgid "Guides Color"
@@ -5978,7 +5979,7 @@ msgstr "Couleur d'os 2"
 
 #: editor/editor_settings.cpp
 msgid "Bone Selected Color"
-msgstr "Couleur de l'os sélectionnée"
+msgstr "Couleur d'os sélectionné"
 
 #: editor/editor_settings.cpp
 msgid "Bone IK Color"
@@ -5990,7 +5991,7 @@ msgstr "Couleur de contour d'os"
 
 #: editor/editor_settings.cpp
 msgid "Bone Outline Size"
-msgstr "Taille du contour de l'os"
+msgstr "Taille de contour d'os"
 
 #: editor/editor_settings.cpp
 msgid "Viewport Border Color"
@@ -5998,7 +5999,7 @@ msgstr "Couleur de bordure de la fenêtre d'affichage"
 
 #: editor/editor_settings.cpp
 msgid "Constrain Editor View"
-msgstr "Restreindre la fenêtre d'Éditeur"
+msgstr "Restreindre la fenêtre d'éditeur"
 
 #: editor/editor_settings.cpp
 msgid "Simple Panning"
@@ -6010,7 +6011,7 @@ msgstr "Panoramique au défilement"
 
 #: editor/editor_settings.cpp
 msgid "Pan Speed"
-msgstr "Vitesse Panoramique"
+msgstr "Vitesse panoramique"
 
 #: editor/editor_settings.cpp editor/plugins/polygon_2d_editor_plugin.cpp
 msgid "Poly Editor"
@@ -6018,7 +6019,7 @@ msgstr "Éditeur de polygones"
 
 #: editor/editor_settings.cpp
 msgid "Point Grab Radius"
-msgstr "Rayon de saisie par point"
+msgstr "Rayon de saisie de point"
 
 #: editor/editor_settings.cpp editor/plugins/polygon_2d_editor_plugin.cpp
 msgid "Show Previous Outline"
@@ -6156,28 +6157,27 @@ msgstr "Couleur des chaînes de caractères"
 #: platform/uwp/export/export.cpp
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Background Color"
-msgstr "Couleur d’Arrière-Plan"
+msgstr "Couleur d’arrière-plan"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Completion Background Color"
 msgstr "Couleur d'arrière-plan de complétion"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion Selected Color"
-msgstr "Importer la sélection"
+msgstr "Couleur de la complétion sélectionnée"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Completion Existing Color"
-msgstr ""
+msgstr "Couleur de la partie existante de la complétion"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Completion Scroll Color"
-msgstr ""
+msgstr "Couleur de défilement de complétion"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Completion Font Color"
-msgstr ""
+msgstr "Couleur de police de complétion"
 
 #: editor/editor_settings.cpp
 msgid "Text Color"
@@ -6185,7 +6185,7 @@ msgstr "Couleur du Texte"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Line Number Color"
-msgstr "Couleur du Numéro de Ligne"
+msgstr "Couleur des numéros de lignes"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Safe Line Number Color"
@@ -6236,9 +6236,8 @@ msgid "Member Variable Color"
 msgstr "Couleur des variables de membres"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Mark Color"
-msgstr "Prélever une couleur"
+msgstr "Couleur de la marque"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Bookmark Color"
@@ -6976,9 +6975,8 @@ msgid "Delimiter"
 msgstr "Délimiteur"
 
 #: editor/import/resource_importer_layered_texture.cpp
-#, fuzzy
 msgid "ColorCorrect"
-msgstr "Correction de Couleur"
+msgstr "ColorCorrect"
 
 #: editor/import/resource_importer_layered_texture.cpp
 msgid "No BPTC If RGB"
@@ -7140,9 +7138,8 @@ msgid "Meshes"
 msgstr "Maillages"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Ensure Tangents"
-msgstr "Modifier la tangente de courbes"
+msgstr "Vérifier les tangentes"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Light Baking"
@@ -7378,7 +7375,8 @@ msgid "8 Bit"
 msgstr "8 Bit"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Mono"
 
@@ -9313,7 +9311,7 @@ msgstr "Diviser le pas de la grille par 2"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid "Pan View"
-msgstr "Vue panoramique"
+msgstr "Panoramique de vue"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid "Zoom to 3.125%"
@@ -10351,7 +10349,7 @@ msgstr "Paramètres de la grille"
 #: editor/plugins/polygon_2d_editor_plugin.cpp modules/csg/csg_shape.cpp
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Snap"
-msgstr "Aligner"
+msgstr "Magnétisme, Aimantation"
 
 #: editor/plugins/polygon_2d_editor_plugin.cpp
 msgid "Enable Snap"
@@ -10746,11 +10744,11 @@ msgstr "Taille de l'historique des températures de script"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Current Script Background Color"
-msgstr "Couleur d'Arrière-Plan du Script Actuel"
+msgstr "Couleur d'arrière-plan du script actuel"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Group Help Pages"
-msgstr "Pages d'aide de groupe"
+msgstr "Grouper les pages d'aide"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Sort Scripts By"
@@ -11315,11 +11313,11 @@ msgstr "Vue libre bas"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Freelook Speed Modifier"
-msgstr "Modificateur de vitesse de la vue libre"
+msgstr "Touche de combinaison : Vitesse de vue libre"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Freelook Slow Modifier"
-msgstr "Ralentissement de la vue libre"
+msgstr "Touche de combinaison : Ralentissement de vue libre"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Toggle Camera Preview"
@@ -12564,9 +12562,8 @@ msgid "Palette Min Width"
 msgstr "Largeur minimale de la palette"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
-#, fuzzy
 msgid "Palette Item H Separation"
-msgstr "Séparateur nommé"
+msgstr "Séparation horizontale des éléments de palette"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
 msgid "Show Tile Names"
@@ -12587,7 +12584,7 @@ msgstr "Aperçu du remplissage"
 #: editor/plugins/tile_map_editor_plugin.cpp
 #: modules/gridmap/grid_map_editor_plugin.cpp
 msgid "Editor Side"
-msgstr "Coté Éditeur"
+msgstr "Coté de l'éditeur"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
 msgid "Display Grid"
@@ -15423,16 +15420,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Rendre local"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr "Un autre Nœud utilise ce nom unique dans la scène."
-
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
 msgstr "Activer le nom unique de la scène"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Unique names already used by another node in the scene:"
+msgstr "Un autre Nœud utilise ce nom unique dans la scène."
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Désactiver le nom unique de la scène"
 
 #: editor/scene_tree_dock.cpp
@@ -15634,6 +15634,10 @@ msgid "Button Group"
 msgstr "Bouton de groupe"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "Désactiver le nom unique de la scène"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Connexion à partir de)"
 
@@ -15712,6 +15716,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Nom de nœud invalide, les caractères suivants ne sont pas autorisés :"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "Un autre Nœud utilise ce nom unique dans la scène."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Renommer le nœud"
 
@@ -16082,7 +16090,7 @@ msgstr "Changer particules AABB"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Reflection Probe"
-msgstr "Sonde de Réflexion"
+msgstr "Sonde de réflexion"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Change Probe Extents"
@@ -16090,7 +16098,7 @@ msgstr "Changer les ampleurs de la sonde"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "GI Probe"
-msgstr "Sonde GI"
+msgstr "Sonde d'illumination globale"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Baked Indirect Light"
@@ -16162,11 +16170,11 @@ msgstr "Définir la position du point de la pièce"
 
 #: editor/spatial_editor_gizmos.cpp scene/3d/portal.cpp
 msgid "Portal Margin"
-msgstr "Marge du portail"
+msgstr "Marge de portail"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Edge"
-msgstr "Bords du portail"
+msgstr "Bord de portail"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Arrow"
@@ -16241,7 +16249,7 @@ msgstr "Serveur à tâches parallèles"
 
 #: main/main.cpp
 msgid "RID Pool Prealloc"
-msgstr ""
+msgstr "Pré-allocation des RIDs de pool"
 
 #: main/main.cpp
 msgid "Debugger stdout"
@@ -16300,8 +16308,9 @@ msgid "Fallback To GLES2"
 msgstr "Se replier sur GLES2"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Use Nvidia Rect Flicker Workaround"
-msgstr ""
+msgstr "Utiliser le contournement Nvidia pour éviter le clignotement"
 
 #: main/main.cpp
 msgid "DPI"
@@ -16348,8 +16357,9 @@ msgid "Thread Model"
 msgstr "Modèle de Parallélisme"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Thread Safe BVH"
-msgstr ""
+msgstr "BVH avec Thread Sécurisés"
 
 #: main/main.cpp
 msgid "Handheld"
@@ -16375,7 +16385,7 @@ msgstr "Forces les trames par seconde"
 
 #: main/main.cpp
 msgid "Enable Pause Aware Picking"
-msgstr ""
+msgstr "Activer la sélection prenant en compte la mise en pause"
 
 #: main/main.cpp scene/gui/item_list.cpp scene/gui/popup_menu.cpp
 #: scene/gui/scroll_container.cpp scene/gui/text_edit.cpp scene/gui/tree.cpp
@@ -16385,7 +16395,7 @@ msgstr "GUI"
 
 #: main/main.cpp
 msgid "Drop Mouse On GUI Input Disabled"
-msgstr ""
+msgstr "Lâcher la souris quand le saisie GUI est désactivée"
 
 #: main/main.cpp
 msgid "stdout"
@@ -16417,7 +16427,7 @@ msgstr "Mode Processeur Faible"
 
 #: main/main.cpp
 msgid "Delta Sync After Draw"
-msgstr ""
+msgstr "Synchroniser le Delta Après l'Affichage"
 
 #: main/main.cpp
 msgid "iOS"
@@ -16499,7 +16509,7 @@ msgstr "Mise en mémoire tampon"
 
 #: main/main.cpp
 msgid "Agile Event Flushing"
-msgstr ""
+msgstr "Purge d'événement agile"
 
 #: main/main.cpp
 msgid "Emulate Touch From Mouse"
@@ -16519,7 +16529,7 @@ msgstr "Image personnalisée"
 
 #: main/main.cpp
 msgid "Custom Image Hotspot"
-msgstr ""
+msgstr "Point d'accès d'image personnalisé"
 
 #: main/main.cpp
 msgid "Tooltip Position Offset"
@@ -16568,7 +16578,7 @@ msgstr "Accepter automatiquement la fermeture"
 
 #: main/main.cpp scene/main/scene_tree.cpp
 msgid "Quit On Go Back"
-msgstr "Quitter au retour"
+msgstr "Fermer sur retour"
 
 #: main/main.cpp scene/main/viewport.cpp
 msgid "Snap Controls To Pixels"
@@ -16584,7 +16594,7 @@ msgstr "Utiliser le suréchantillonnage"
 
 #: modules/bullet/register_types.cpp modules/bullet/space_bullet.cpp
 msgid "Active Soft World"
-msgstr ""
+msgstr "Activer le support des SoftBody par le Monde"
 
 #: modules/csg/csg_gizmos.cpp
 msgid "CSG"
@@ -16694,9 +16704,8 @@ msgid "Path Node"
 msgstr "Noeud de chemin"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Path Interval Type"
-msgstr "Créer un vertex interne"
+msgstr "Type d'intervalle de chemin"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path Interval"
@@ -17016,9 +17025,8 @@ msgid "Byte Stride"
 msgstr ""
 
 #: modules/gltf/gltf_buffer_view.cpp
-#, fuzzy
 msgid "Indices"
-msgstr "Tous les périphérique"
+msgstr "Indices"
 
 #: modules/gltf/gltf_camera.cpp
 msgid "FOV Size"
@@ -17026,12 +17034,11 @@ msgstr "Taille du FOV"
 
 #: modules/gltf/gltf_camera.cpp
 msgid "Zfar"
-msgstr ""
+msgstr "Zfar"
 
 #: modules/gltf/gltf_camera.cpp
-#, fuzzy
 msgid "Znear"
-msgstr "Linéaire"
+msgstr "Znear"
 
 #: modules/gltf/gltf_light.cpp scene/2d/canvas_modulate.cpp
 #: scene/2d/cpu_particles_2d.cpp scene/2d/light_2d.cpp scene/2d/polygon_2d.cpp
@@ -17055,16 +17062,15 @@ msgstr "Plage"
 
 #: modules/gltf/gltf_light.cpp
 msgid "Inner Cone Angle"
-msgstr ""
+msgstr "Angle intérieur du cône"
 
 #: modules/gltf/gltf_light.cpp
 msgid "Outer Cone Angle"
-msgstr ""
+msgstr "Angle extérieur du cône"
 
 #: modules/gltf/gltf_mesh.cpp
-#, fuzzy
 msgid "Blend Weights"
-msgstr "Précalculer les lightmaps"
+msgstr "Mélanger les poids"
 
 #: modules/gltf/gltf_mesh.cpp
 msgid "Instance Materials"
@@ -17075,9 +17081,8 @@ msgid "Parent"
 msgstr "Parent"
 
 #: modules/gltf/gltf_node.cpp
-#, fuzzy
 msgid "Xform"
-msgstr "Plateforme"
+msgstr "Xform"
 
 #: modules/gltf/gltf_node.cpp scene/3d/mesh_instance.cpp
 msgid "Skin"
@@ -17469,16 +17474,15 @@ msgstr "Hauteur de l’œil"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "IOD"
-msgstr ""
+msgstr "Distance interoculaire"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "Display Width"
 msgstr "Afficher la largeur"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
-#, fuzzy
 msgid "Display To Lens"
-msgstr "Afficher sans ombrage"
+msgstr "Distance affichage-lentille"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "Oversample"
@@ -17504,6 +17508,21 @@ msgstr "Compiler la solution"
 msgid "Auto Update Project"
 msgstr "Mettre à jour le projet automatiquement"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Afficher le nom"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Choisir un répertoire"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Choisir un répertoire"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Fin de la trace d'appel (stack trace) intrinsèque"
@@ -18454,13 +18473,14 @@ msgid "Optional Features"
 msgstr "Fonctionnalités Optionnelles"
 
 #: modules/webxr/webxr_interface.cpp
+#, fuzzy
 msgid "Requested Reference Space Types"
-msgstr ""
+msgstr "Type d'espace référence requis"
 
 #: modules/webxr/webxr_interface.cpp
 #, fuzzy
 msgid "Reference Space Type"
-msgstr "Type de référentiel spatial"
+msgstr "Type d'espace référence"
 
 #: modules/webxr/webxr_interface.cpp
 msgid "Visibility State"
@@ -18473,24 +18493,23 @@ msgstr "Géométrie des limites"
 #: modules/webxr/webxr_interface.cpp
 #, fuzzy
 msgid "XR Standard Mapping"
-msgstr "Magnétisme intelligent"
+msgstr "Mapping Standard AR/VR"
 
 #: platform/android/export/export.cpp
 msgid "Android SDK Path"
 msgstr "Chemin du SDK Android"
 
 #: platform/android/export/export.cpp
-#, fuzzy
 msgid "Debug Keystore"
-msgstr "Débogueur"
+msgstr "Keystore de débogage"
 
 #: platform/android/export/export.cpp
 msgid "Debug Keystore User"
-msgstr ""
+msgstr "Utilisateur du Keystore de débogage"
 
 #: platform/android/export/export.cpp
 msgid "Debug Keystore Pass"
-msgstr ""
+msgstr "Passe du Keystore de débogage"
 
 #: platform/android/export/export.cpp
 msgid "Force System User"
@@ -18570,9 +18589,8 @@ msgid "Architectures"
 msgstr "Architectures"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Keystore"
-msgstr "Débogueur"
+msgstr "Keystore"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Debug User"
@@ -19292,6 +19310,11 @@ msgstr "Utiliser la couleur d'arrière-plan personnalisée"
 msgid "Custom BG Color"
 msgstr "Couleur d'arrière-plan personnalisée"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Icône d'exportation"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19597,8 +19620,9 @@ msgid "Allow JIT Code Execution"
 msgstr "Autoriser l'exécution du code JIT"
 
 #: platform/osx/export/export.cpp
+#, fuzzy
 msgid "Allow Unsigned Executable Memory"
-msgstr ""
+msgstr "Autoriser la mémoire exécutable non signée"
 
 #: platform/osx/export/export.cpp
 msgid "Allow Dyld Environment Variables"
@@ -20126,6 +20150,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr "Afficher le nom sur le carré 310 X 310"
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Nom abrégé du paquet invalide."
 
@@ -20147,7 +20177,7 @@ msgstr "GUID éditeur invalide."
 
 #: platform/uwp/export/export.cpp
 msgid "Invalid background color."
-msgstr "Couleur de fond invalide."
+msgstr "Couleur d'arrière-plan invalide."
 
 #: platform/uwp/export/export.cpp
 msgid "Invalid Store Logo image dimensions (should be 50x50)."
@@ -22224,8 +22254,9 @@ msgid "Include In Bound"
 msgstr ""
 
 #: scene/3d/cull_instance.cpp
+#, fuzzy
 msgid "Allow Merging"
-msgstr ""
+msgstr "Autoriser la fusion"
 
 #: scene/3d/cull_instance.cpp
 msgid "Autoplace Priority"
@@ -22956,7 +22987,7 @@ msgstr ""
 
 #: scene/3d/proximity_group.cpp
 msgid "Grid Radius"
-msgstr "Rayon de la Grille"
+msgstr "Rayon de la grille"
 
 #: scene/3d/ray_cast.cpp
 msgid "Debug Shape"
@@ -22972,7 +23003,7 @@ msgstr "Mode de mise à jour"
 
 #: scene/3d/reflection_probe.cpp
 msgid "Origin Offset"
-msgstr "Décalage de la Grille"
+msgstr "Décalage de l'origine"
 
 #: scene/3d/reflection_probe.cpp
 msgid "Box Projection"
@@ -23131,9 +23162,8 @@ msgid "Overlap Warning Threshold"
 msgstr ""
 
 #: scene/3d/room_manager.cpp
-#, fuzzy
 msgid "Preview Camera"
-msgstr "Aperçu"
+msgstr "Aperçu de caméra"
 
 #: scene/3d/room_manager.cpp
 msgid "Portal Depth Limit"
@@ -23261,8 +23291,9 @@ msgid "Volume Stiffness"
 msgstr ""
 
 #: scene/3d/soft_body.cpp
+#, fuzzy
 msgid "Pressure Coefficient"
-msgstr ""
+msgstr "Coefficient de pression"
 
 #: scene/3d/soft_body.cpp
 msgid "Damping Coefficient"
@@ -23297,12 +23328,11 @@ msgstr "Transformation Globale"
 
 #: scene/3d/spatial.cpp
 msgid "Matrix"
-msgstr ""
+msgstr "Matrice"
 
 #: scene/3d/spatial.cpp
-#, fuzzy
 msgid "Gizmo"
-msgstr "Gadgets"
+msgstr "Gizmo"
 
 #: scene/3d/spatial_velocity_tracker.cpp
 #, fuzzy
@@ -23311,16 +23341,15 @@ msgstr "Image physique %"
 
 #: scene/3d/spring_arm.cpp
 msgid "Spring Length"
-msgstr ""
+msgstr "Longueur du ressort"
 
 #: scene/3d/sprite_3d.cpp scene/gui/graph_edit.cpp
 msgid "Opacity"
-msgstr ""
+msgstr "Opacité"
 
 #: scene/3d/sprite_3d.cpp scene/resources/material.cpp
-#, fuzzy
 msgid "Transparent"
-msgstr "Transposer"
+msgstr "Transparent"
 
 #: scene/3d/sprite_3d.cpp
 msgid ""
@@ -23339,26 +23368,24 @@ msgstr ""
 "l'utiliser comme enfant d'un VehicleBody."
 
 #: scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Per-Wheel Motion"
-msgstr "Molette vers le bas"
+msgstr "Mouvement par roue"
 
 #: scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Engine Force"
-msgstr "Documentation en ligne"
+msgstr "Force du moteur"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Brake"
-msgstr ""
+msgstr "Frein"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Steering"
-msgstr ""
+msgstr "Direction"
 
 #: scene/3d/vehicle_body.cpp
 msgid "VehicleBody Motion"
-msgstr ""
+msgstr "Mouvement du VehicleBody"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Use As Traction"
@@ -23366,7 +23393,7 @@ msgstr "Utiliser comme traction"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Use As Steering"
-msgstr ""
+msgstr "Utiliser comme direction"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Wheel"
@@ -23374,68 +23401,59 @@ msgstr "Molette"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Roll Influence"
-msgstr ""
+msgstr "Influence de rotation"
 
 #: scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Friction Slip"
-msgstr "Fonction"
+msgstr "Glissement par friction"
 
 #: scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Suspension"
-msgstr "Expression"
+msgstr "Suspension"
 
 #: scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Max Force"
-msgstr "Erreur"
+msgstr "Force max"
 
 #: scene/3d/visibility_notifier.cpp
 msgid "AABB"
-msgstr ""
+msgstr "AABB"
 
 #: scene/3d/visual_instance.cpp scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Geometry"
-msgstr "Réessayer"
+msgstr "Géométrie"
 
 #: scene/3d/visual_instance.cpp
-#, fuzzy
 msgid "Material Override"
-msgstr "Redéfinition"
+msgstr "Redéfinition du matériau"
 
 #: scene/3d/visual_instance.cpp
 msgid "Material Overlay"
 msgstr "Superposition de Matériau"
 
 #: scene/3d/visual_instance.cpp
-#, fuzzy
 msgid "Cast Shadow"
-msgstr "Créer un nœud Shader"
+msgstr "Projeter des ombres"
 
 #: scene/3d/visual_instance.cpp
 msgid "Extra Cull Margin"
 msgstr "Marge supplémentaire de détermination des faces cachées"
 
 #: scene/3d/visual_instance.cpp
-#, fuzzy
 msgid "Baked Light"
-msgstr "Précalculer les lightmaps"
+msgstr "Lumières pré-calculées"
 
 #: scene/3d/visual_instance.cpp
-#, fuzzy
 msgid "Generate Lightmap"
-msgstr "Génération des lightmaps"
+msgstr "Générer des lightmaps"
 
 #: scene/3d/visual_instance.cpp
-#, fuzzy
 msgid "Lightmap Scale"
-msgstr "LightMap Bake"
+msgstr "Échelle de Lightmap"
 
 #: scene/3d/visual_instance.cpp
 msgid "LOD"
-msgstr ""
+msgstr "Niveau de détail (LOD)"
 
 #: scene/3d/visual_instance.cpp scene/animation/skeleton_ik.cpp
 #: scene/resources/material.cpp
@@ -23444,11 +23462,11 @@ msgstr "Distance Minimale"
 
 #: scene/3d/visual_instance.cpp
 msgid "Min Hysteresis"
-msgstr ""
+msgstr "Hystérèse min"
 
 #: scene/3d/visual_instance.cpp
 msgid "Max Hysteresis"
-msgstr ""
+msgstr "Hystérèse max"
 
 #: scene/3d/world_environment.cpp
 msgid ""
@@ -23483,9 +23501,8 @@ msgid "Animation not found: '%s'"
 msgstr "Animation introuvable : « %s »"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Mix Mode"
-msgstr "Mélanger le nœud"
+msgstr "Mode de mélange"
 
 #: scene/animation/animation_blend_tree.cpp
 msgid "Fadein Time"
@@ -23505,30 +23522,27 @@ msgstr "Redémarrage Automatique"
 
 #: scene/animation/animation_blend_tree.cpp
 msgid "Delay"
-msgstr ""
+msgstr "Délai"
 
 #: scene/animation/animation_blend_tree.cpp
 msgid "Random Delay"
 msgstr "Retard aléatoire"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Add Amount"
-msgstr "Quantité"
+msgstr "Ajouter une quantité"
 
 #: scene/animation/animation_blend_tree.cpp
 msgid "Blend Amount"
 msgstr "Quantité de mélange"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Seek Position"
-msgstr "Définir position d'entrée de la courbe"
+msgstr "Chercher la position"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Input Count"
-msgstr "Ajouter un port d'entrée"
+msgstr "Nombre d'entrées"
 
 #: scene/animation/animation_blend_tree.cpp
 #: scene/animation/animation_node_state_machine.cpp
@@ -23538,58 +23552,51 @@ msgstr "Durée du fondu croisé"
 #: scene/animation/animation_node_state_machine.cpp
 #, fuzzy
 msgid "Switch Mode"
-msgstr "Switch"
+msgstr "Mode de Switch"
 
 #: scene/animation/animation_node_state_machine.cpp
-#, fuzzy
 msgid "Auto Advance"
-msgstr "Définir la progression automatique"
+msgstr "Progression automatique"
 
 #: scene/animation/animation_node_state_machine.cpp
-#, fuzzy
 msgid "Advance Condition"
-msgstr "Options avancées"
+msgstr "Condition de progression"
 
 #: scene/animation/animation_player.cpp
 msgid "Anim Apply Reset"
 msgstr "Animer Appliquer Réinitialiser"
 
 #: scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Current Animation"
-msgstr "Définir l'animation"
+msgstr "Animation actuelle"
 
 #: scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Assigned Animation"
-msgstr "Ajouter une Animation"
+msgstr "Animation assignée"
 
 #: scene/animation/animation_player.cpp
 msgid "Reset On Save"
-msgstr ""
+msgstr "Réinitialiser en sauvegardant"
 
 #: scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Current Animation Length"
-msgstr "Modifier la durée de l’animation"
+msgstr "Durée de l’animation actuelle"
 
 #: scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Current Animation Position"
-msgstr "Ajouter un point d'animation"
+msgstr "Position dans l'animation actuelle"
 
 #: scene/animation/animation_player.cpp
 msgid "Playback Options"
 msgstr "Options de Lecture"
 
 #: scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Default Blend Time"
-msgstr "Thème par défaut"
+msgstr "Temps de fondu par défaut"
 
 #: scene/animation/animation_player.cpp
 msgid "Method Call Mode"
-msgstr ""
+msgstr "Mode d'appel de méthode"
 
 #: scene/animation/animation_tree.cpp
 msgid "In node '%s', invalid animation: '%s'."
@@ -23627,18 +23634,16 @@ msgid "Tree Root"
 msgstr "Racine de l’Arbre"
 
 #: scene/animation/animation_tree.cpp
-#, fuzzy
 msgid "Anim Player"
-msgstr "Épingler AnimationPlayer"
+msgstr "Animation Player"
 
 #: scene/animation/animation_tree.cpp
 msgid "Root Motion"
-msgstr ""
+msgstr "Mouvement de racine"
 
 #: scene/animation/animation_tree.cpp
-#, fuzzy
 msgid "Track"
-msgstr "Ajouter une piste"
+msgstr "Piste"
 
 #: scene/animation/animation_tree_player.cpp
 msgid "This node has been deprecated. Use AnimationTree instead."
@@ -23655,66 +23660,56 @@ msgid "Master Player"
 msgstr "Coller les paramètres"
 
 #: scene/animation/animation_tree_player.cpp
-#, fuzzy
 msgid "Base Path"
-msgstr "Chemin d'exportation"
+msgstr "Chemin de base"
 
 #: scene/animation/root_motion_view.cpp
-#, fuzzy
 msgid "Animation Path"
-msgstr "Animation"
+msgstr "Chemin d'animation"
 
 #: scene/animation/root_motion_view.cpp
-#, fuzzy
 msgid "Zero Y"
-msgstr "Zéro"
+msgstr "Mettre Y à zéro"
 
 #: scene/animation/skeleton_ik.cpp
-#, fuzzy
 msgid "Root Bone"
-msgstr "Nom de nœud racine"
+msgstr "Os racine"
 
 #: scene/animation/skeleton_ik.cpp
-#, fuzzy
 msgid "Tip Bone"
-msgstr "Os"
+msgstr "Os d'extrémité"
 
 #: scene/animation/skeleton_ik.cpp
-#, fuzzy
 msgid "Interpolation"
-msgstr "Mode d’interpolation"
+msgstr "Interpolation"
 
 #: scene/animation/skeleton_ik.cpp
-#, fuzzy
 msgid "Override Tip Basis"
-msgstr "Redéfinition"
+msgstr "Redéfinir la base d’extrémité"
 
 #: scene/animation/skeleton_ik.cpp
 msgid "Use Magnet"
-msgstr ""
+msgstr "Utiliser le magnétisme"
 
 #: scene/animation/skeleton_ik.cpp
 msgid "Magnet"
-msgstr ""
+msgstr "Magnétisme"
 
 #: scene/animation/skeleton_ik.cpp
-#, fuzzy
 msgid "Target Node"
-msgstr "Re-parenter le nœud"
+msgstr "Nœud cible"
 
 #: scene/animation/skeleton_ik.cpp
-#, fuzzy
 msgid "Max Iterations"
-msgstr "Faire fonction"
+msgstr "Itérations max"
 
 #: scene/animation/tween.cpp
 msgid "Playback Process Mode"
-msgstr ""
+msgstr "Mode du processus de lecture"
 
 #: scene/animation/tween.cpp
-#, fuzzy
 msgid "Playback Speed"
-msgstr "Lancer la scène"
+msgstr "Vitesse de lecture"
 
 #: scene/audio/audio_stream_player.cpp
 #, fuzzy
@@ -23723,29 +23718,25 @@ msgstr "Cible"
 
 #: scene/gui/aspect_ratio_container.cpp scene/gui/range.cpp
 #: servers/audio/effects/audio_effect_compressor.cpp
-#, fuzzy
 msgid "Ratio"
-msgstr "Conserver les Proportions"
+msgstr "Ratio"
 
 #: scene/gui/aspect_ratio_container.cpp scene/gui/texture_button.cpp
 #: scene/gui/texture_rect.cpp
-#, fuzzy
 msgid "Stretch Mode"
-msgstr "Mode sélection"
+msgstr "Mode d’étirement"
 
 #: scene/gui/aspect_ratio_container.cpp scene/gui/box_container.cpp
 msgid "Alignment"
-msgstr ""
+msgstr "Alignement"
 
 #: scene/gui/base_button.cpp
-#, fuzzy
 msgid "Shortcut In Tooltip"
-msgstr "Afficher l'origine"
+msgstr "Raccourci dans l'info-bulle"
 
 #: scene/gui/base_button.cpp
-#, fuzzy
 msgid "Action Mode"
-msgstr "Mode Icône"
+msgstr "Mode d'action"
 
 #: scene/gui/base_button.cpp
 msgid "Enabled Focus Mode"
@@ -23756,14 +23747,12 @@ msgid "Keep Pressed Outside"
 msgstr ""
 
 #: scene/gui/base_button.cpp scene/gui/shortcut.cpp
-#, fuzzy
 msgid "Shortcut"
-msgstr "Raccourcis"
+msgstr "Raccourci"
 
 #: scene/gui/base_button.cpp
-#, fuzzy
 msgid "Group"
-msgstr "Groupes"
+msgstr "Groupe"
 
 #: scene/gui/button.cpp scene/gui/label.cpp
 #, fuzzy
@@ -23773,11 +23762,11 @@ msgstr "Copier le texte"
 #: scene/gui/button.cpp scene/gui/label.cpp scene/gui/line_edit.cpp
 #: scene/gui/spin_box.cpp
 msgid "Align"
-msgstr ""
+msgstr "Aligner"
 
 #: scene/gui/button.cpp
 msgid "Icon Align"
-msgstr ""
+msgstr "Aligner l'icône"
 
 #: scene/gui/button.cpp
 #, fuzzy
@@ -23785,9 +23774,8 @@ msgid "Expand Icon"
 msgstr "Développer tout"
 
 #: scene/gui/center_container.cpp
-#, fuzzy
 msgid "Use Top Left"
-msgstr "En haut à gauche"
+msgstr "Utiliser haut à gauche"
 
 #: scene/gui/color_picker.cpp
 msgid ""
@@ -23800,34 +23788,28 @@ msgstr ""
 "Clic droit : Supprimer le préréglage"
 
 #: scene/gui/color_picker.cpp
-#, fuzzy
 msgid "Edit Alpha"
-msgstr "Modifier le polygone"
+msgstr "Modifier alpha"
 
 #: scene/gui/color_picker.cpp
-#, fuzzy
 msgid "HSV Mode"
-msgstr "Mode sélection"
+msgstr "Mode HSV"
 
 #: scene/gui/color_picker.cpp
-#, fuzzy
 msgid "Raw Mode"
-msgstr "Mode navigation"
+msgstr "Mode brut"
 
 #: scene/gui/color_picker.cpp
-#, fuzzy
 msgid "Deferred Mode"
-msgstr "Différé"
+msgstr "Mode différé"
 
 #: scene/gui/color_picker.cpp
-#, fuzzy
 msgid "Presets Enabled"
-msgstr "Préréglages"
+msgstr "Préréglages activés"
 
 #: scene/gui/color_picker.cpp
-#, fuzzy
 msgid "Presets Visible"
-msgstr "Rendre visible"
+msgstr "Préréglages visibles"
 
 #: scene/gui/color_picker.cpp
 msgid "Pick a color from the editor window."
@@ -23857,9 +23839,8 @@ msgstr ""
 "Control."
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Theme Overrides"
-msgstr "Redéfinition"
+msgstr "Redéfinitions de thème"
 
 #: scene/gui/control.cpp
 msgid ""
@@ -23871,14 +23852,12 @@ msgstr ""
 "souris sur \"Stop\" ou \"Pass\"."
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Anchor"
-msgstr "Uniquement les ancres"
+msgstr "Ancre"
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Grow Direction"
-msgstr "Directions"
+msgstr "Direction d'expansion"
 
 #: scene/gui/control.cpp scene/resources/navigation_mesh.cpp
 msgid "Min Size"
@@ -23895,12 +23874,11 @@ msgstr "Constante de classe"
 
 #: scene/gui/control.cpp scene/resources/visual_shader_nodes.cpp
 msgid "Hint"
-msgstr ""
+msgstr "Suggestion"
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Tooltip"
-msgstr "Outils"
+msgstr "Info-bulle"
 
 #: scene/gui/control.cpp scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -23909,20 +23887,19 @@ msgstr "Focaliser le chemin"
 
 #: scene/gui/control.cpp
 msgid "Neighbour Left"
-msgstr ""
+msgstr "Voisin gauche"
 
 #: scene/gui/control.cpp
 msgid "Neighbour Top"
-msgstr ""
+msgstr "Voisin au dessus"
 
 #: scene/gui/control.cpp
 msgid "Neighbour Right"
-msgstr ""
+msgstr "Voisin à droite"
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Neighbour Bottom"
-msgstr "Centrée en bas"
+msgstr "Voisin en dessous"
 
 #: scene/gui/control.cpp
 msgid "Next"
@@ -23934,7 +23911,7 @@ msgstr "Précédent"
 
 #: scene/gui/control.cpp
 msgid "Mouse"
-msgstr ""
+msgstr "Souris"
 
 #: scene/gui/control.cpp
 msgid "Default Cursor Shape"
@@ -23949,9 +23926,8 @@ msgid "Size Flags"
 msgstr "Drapeaux de Taille"
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Stretch Ratio"
-msgstr "Mode sélection"
+msgstr "Ratio d’étirement"
 
 #: scene/gui/control.cpp
 #, fuzzy
@@ -23960,12 +23936,11 @@ msgstr "Propriétés du thème"
 
 #: scene/gui/dialogs.cpp
 msgid "Window Title"
-msgstr ""
+msgstr "Titre de la fenêtre"
 
 #: scene/gui/dialogs.cpp
-#, fuzzy
 msgid "Dialog"
-msgstr "Dialogue XForm"
+msgstr "Boîte de dialogue"
 
 #: scene/gui/dialogs.cpp
 msgid "Hide On OK"
@@ -24501,7 +24476,7 @@ msgstr ""
 
 #: scene/gui/tabs.cpp
 msgid "Scrolling Enabled"
-msgstr ""
+msgstr "Défilement activé"
 
 #: scene/gui/text_edit.cpp
 msgid "Readonly"
@@ -24815,44 +24790,40 @@ msgstr "Nouvelle racine de scène"
 
 #: scene/main/scene_tree.cpp
 msgid "Root"
-msgstr ""
+msgstr "Racine"
 
 #: scene/main/scene_tree.cpp
-#, fuzzy
 msgid "Multiplayer Poll"
-msgstr "Multiplier %s"
+msgstr "Poll d'attente active (polling) multijoueur"
 
 #: scene/main/scene_tree.cpp scene/resources/mesh_library.cpp
 #: scene/resources/shape_2d.cpp
 msgid "Shapes"
-msgstr ""
+msgstr "Formes"
 
 #: scene/main/scene_tree.cpp
 msgid "Shape Color"
-msgstr ""
+msgstr "Couleur de forme"
 
 #: scene/main/scene_tree.cpp
-#, fuzzy
 msgid "Contact Color"
-msgstr "Prélever une couleur"
+msgstr "Couleur de contact"
 
 #: scene/main/scene_tree.cpp
 msgid "Geometry Color"
-msgstr ""
+msgstr "Couleur de géométrie"
 
 #: scene/main/scene_tree.cpp
-#, fuzzy
 msgid "Disabled Geometry Color"
-msgstr "Item désactivé"
+msgstr "Couleur des géométries désactivées"
 
 #: scene/main/scene_tree.cpp
 msgid "Max Contacts Displayed"
-msgstr ""
+msgstr "Maximum de contacts affichés"
 
 #: scene/main/scene_tree.cpp scene/resources/shape_2d.cpp
-#, fuzzy
 msgid "Draw 2D Outlines"
-msgstr "Créer le contour"
+msgstr "Dessiner les contours 2D"
 
 #: scene/main/scene_tree.cpp servers/visual_server.cpp
 msgid "Reflections"
@@ -24864,15 +24835,15 @@ msgstr "Taille de l'Atlas"
 
 #: scene/main/scene_tree.cpp
 msgid "Atlas Subdiv"
-msgstr ""
+msgstr "Subdivision d'atlas"
 
 #: scene/main/scene_tree.cpp scene/main/viewport.cpp
 msgid "MSAA"
-msgstr ""
+msgstr "MSAA"
 
 #: scene/main/scene_tree.cpp
 msgid "Use FXAA"
-msgstr ""
+msgstr "Utiliser FXAA"
 
 #: scene/main/scene_tree.cpp
 msgid "Use Debanding"
@@ -24880,16 +24851,15 @@ msgstr ""
 
 #: scene/main/scene_tree.cpp scene/main/viewport.cpp
 msgid "HDR"
-msgstr ""
+msgstr "HDR (High Dynamic Range)"
 
 #: scene/main/scene_tree.cpp scene/main/viewport.cpp
 msgid "Use 32 BPC Depth"
-msgstr ""
+msgstr "Utiliser profondeur de couleur 32 bits"
 
 #: scene/main/scene_tree.cpp
-#, fuzzy
 msgid "Default Environment"
-msgstr "Voir environnement"
+msgstr "Environnement par défaut"
 
 #: scene/main/scene_tree.cpp
 msgid ""
@@ -24921,9 +24891,8 @@ msgid "Autostart"
 msgstr "Démarrage Automatique"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Viewport Path"
-msgstr "Chemin d'exportation"
+msgstr "Chemin de la fenêtre d'affichage"
 
 #: scene/main/viewport.cpp
 msgid ""
@@ -24941,10 +24910,15 @@ msgid ""
 "Effects.\n"
 "HDR will be disabled for this Viewport."
 msgstr ""
+"Cette fenêtre d'affichage utilise le HDR mais son Utilisation est 2D ou 2D "
+"No-Sampling.\n"
+"Le HDR est supporte uniquement sur les fenêtres d'affichage avec une "
+"Utilisation 3D ou 3D No-Effects.\n"
+"Le HDR sera désactivé pour cette fenêtre d'affichage."
 
 #: scene/main/viewport.cpp
 msgid "ARVR"
-msgstr ""
+msgstr "ARVR"
 
 #: scene/main/viewport.cpp
 #, fuzzy
@@ -24952,30 +24926,29 @@ msgid "Size Override Stretch"
 msgstr "Remplacer l'item"
 
 #: scene/main/viewport.cpp
+#, fuzzy
 msgid "Own World"
-msgstr ""
+msgstr "Propre Monde"
 
 #: scene/main/viewport.cpp scene/resources/world_2d.cpp
 msgid "World"
-msgstr ""
+msgstr "Monde"
 
 #: scene/main/viewport.cpp
 msgid "World 2D"
-msgstr ""
+msgstr "Monde 2D"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Transparent BG"
-msgstr "Transposer"
+msgstr "Arrière-plan transparent"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Handle Input Locally"
-msgstr "Changer nom de l'entrée"
+msgstr "Gérer les entrées localement"
 
 #: scene/main/viewport.cpp
 msgid "FXAA"
-msgstr ""
+msgstr "FXAA"
 
 #: scene/main/viewport.cpp
 #, fuzzy
@@ -24983,23 +24956,20 @@ msgid "Debanding"
 msgstr "Liaison"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Disable 3D"
-msgstr "Item désactivé"
+msgstr "Désactiver 3D"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Keep 3D Linear"
-msgstr "Linéaire gauche"
+msgstr "Garder 3D linéaire"
 
 #: scene/main/viewport.cpp
 msgid "Render Direct To Screen"
-msgstr ""
+msgstr "Rendre directement vers l’écran"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Debug Draw"
-msgstr "Débogage"
+msgstr "Déboguer appel de dessin"
 
 #: scene/main/viewport.cpp
 msgid "Render Target"
@@ -25007,7 +24977,7 @@ msgstr "Rendre la cible"
 
 #: scene/main/viewport.cpp
 msgid "V Flip"
-msgstr ""
+msgstr "Miroir V"
 
 #: scene/main/viewport.cpp
 #, fuzzy
@@ -25015,14 +24985,12 @@ msgid "Clear Mode"
 msgstr "Mode Règle"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Enable 2D"
-msgstr "Activer"
+msgstr "Activer 2D"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Enable 3D"
-msgstr "Activer"
+msgstr "Activer 3D"
 
 #: scene/main/viewport.cpp
 #, fuzzy
@@ -25030,9 +24998,8 @@ msgid "Object Picking"
 msgstr "Activer l'effet « pelure d'oignon »"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Disable Input"
-msgstr "Item désactivé"
+msgstr "Désactiver entrées"
 
 #: scene/main/viewport.cpp servers/visual_server.cpp
 #, fuzzy
@@ -25041,97 +25008,84 @@ msgstr "Nouvel Atlas"
 
 #: scene/main/viewport.cpp
 msgid "Quad 0"
-msgstr ""
+msgstr "Quad 0"
 
 #: scene/main/viewport.cpp
 msgid "Quad 1"
-msgstr ""
+msgstr "Quad 1"
 
 #: scene/main/viewport.cpp
 msgid "Quad 2"
-msgstr ""
+msgstr "Quad 2"
 
 #: scene/main/viewport.cpp
 msgid "Quad 3"
-msgstr ""
+msgstr "Quad 3"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Canvas Transform"
-msgstr "Supprimer la transformation"
+msgstr "Transformation du canevas"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Global Canvas Transform"
-msgstr "Conserver la transformation globale"
+msgstr "Transformation du canevas global"
 
 #: scene/main/viewport.cpp
 msgid "Tooltip Delay (sec)"
-msgstr ""
+msgstr "Délai de l'info-bulle (sec)"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "Swap OK Cancel"
-msgstr "Annuler"
+msgstr "Inverser OK et Annuler"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "Layer Names"
-msgstr "Nom"
+msgstr "Noms des couches"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "2D Render"
-msgstr "Rendu"
+msgstr "Rendu 2D"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "3D Render"
-msgstr "Rendu"
+msgstr "Rendu 3D"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "2D Physics"
-msgstr "Physique"
+msgstr "Physique 2D"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "3D Physics"
-msgstr "Physique"
+msgstr "Physique 3D"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "2D Navigation"
-msgstr "Navigation"
+msgstr "Navigation 2D"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "3D Navigation"
-msgstr "Navigation"
+msgstr "Navigation 3D"
 
 #: scene/register_scene_types.cpp
 msgid "Use hiDPI"
-msgstr ""
+msgstr "Utiliser hiDPI"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "Custom"
-msgstr "Nœud Personnalisé"
+msgstr "Personnalisé"
 
 #: scene/register_scene_types.cpp
-#, fuzzy
 msgid "Custom Font"
-msgstr "Nœud Personnalisé"
+msgstr "Police personnalisée"
 
 #: scene/resources/audio_stream_sample.cpp
 #: servers/audio/effects/audio_stream_generator.cpp servers/audio_server.cpp
-#, fuzzy
 msgid "Mix Rate"
-msgstr "Mélanger le nœud"
+msgstr "Taux de mélange"
 
 #: scene/resources/audio_stream_sample.cpp
 msgid "Stereo"
-msgstr ""
+msgstr "Stéréo"
 
 #: scene/resources/concave_polygon_shape_2d.cpp
 msgid "Segments"
@@ -25148,121 +25102,103 @@ msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Panel"
-msgstr ""
+msgstr "Panneau"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color"
-msgstr "Prélever une couleur"
+msgstr "Couleur de police"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color Pressed"
-msgstr "Renommer l'item de couleur"
+msgstr "Couleur de police quand pressé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color Hover"
-msgstr "Renommer l'item de couleur"
+msgstr "Couleur de police au survol"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color Focus"
-msgstr "Remplir la surface"
+msgstr "Couleur de police quand actif"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color Disabled"
-msgstr "Âgrafe désactivée"
+msgstr "Couleur de police quand désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "H Separation"
-msgstr "Séparation H"
+msgstr "Séparation horizontale"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Underline Spacing"
-msgstr "Bouclage de l’animation"
+msgstr "Espacement du soulignage"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Arrow"
-msgstr ""
+msgstr "Flèche"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Arrow Margin"
-msgstr "Définir la marge"
+msgstr "Marge de flèche"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Hover Pressed"
-msgstr "Pressé"
+msgstr "Survol pressé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Checked Disabled"
-msgstr "Item à cocher"
+msgstr "Coché désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Unchecked"
-msgstr "Item coché"
+msgstr "Non coché"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Unchecked Disabled"
-msgstr "Item désactivé"
+msgstr "Non coché désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Radio Checked"
-msgstr "Item coché"
+msgstr "Radio coché"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Radio Checked Disabled"
-msgstr "(Éditeur désactivé)"
+msgstr "Radio coché désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Radio Unchecked"
-msgstr ""
+msgstr "Radio non coché"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Radio Unchecked Disabled"
-msgstr ""
+msgstr "Radio non coché désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Font Color Hover Pressed"
-msgstr ""
+msgstr "Couleur de police au survol pressé"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Check V Adjust"
-msgstr ""
+msgstr "Ajustement V de la case à cocher"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "On Disabled"
-msgstr "Item désactivé"
+msgstr "Quand désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Off"
-msgstr "Décalage"
+msgstr "Éteint"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Off Disabled"
-msgstr "Item désactivé"
+msgstr "Éteint désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color Shadow"
-msgstr "Renommer l'item de couleur"
+msgstr "Couleur de police de l'ombre"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Outline Modulate"
-msgstr "Forcer la modulation blanche"
+msgstr "Moduler le contour de la police"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Shadow Offset X"
@@ -25273,23 +25209,20 @@ msgid "Shadow Offset Y"
 msgstr "Décalage Y de l'ombre"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Shadow As Outline"
-msgstr "Plan précédent"
+msgstr "Ombre comme contour"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color Selected"
-msgstr "Déverrouillage Sélectionné"
+msgstr "Couleur de police quand sélectionné"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Font Color Uneditable"
-msgstr ""
+msgstr "Couleur de police quand non-éditable"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Cursor Color"
-msgstr "Nœud Personnalisé"
+msgstr "Couleur du curseur"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25307,25 +25240,22 @@ msgid "Minimum Spaces"
 msgstr "Scène principale"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "BG"
-msgstr "o"
+msgstr "Arrière-plan"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "FG"
-msgstr ""
+msgstr "Premier plan"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Tab"
-msgstr "Onglet 1"
+msgstr "Onglet"
 
 #: scene/resources/default_theme/default_theme.cpp
 #: scene/resources/dynamic_font.cpp scene/resources/world.cpp
 #: scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Space"
-msgstr "Scène principale"
+msgstr "Espace"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Folded"
@@ -25337,86 +25267,75 @@ msgstr "Replier"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Font Color Readonly"
-msgstr ""
+msgstr "Couleur de police quand en lecture seule"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion Lines"
-msgstr "Complétion"
+msgstr "Lignes de complétion"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion Max Width"
-msgstr "Complétion"
+msgstr "Largeur maximale de complétion"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion Scroll Width"
-msgstr "Importer la sélection"
+msgstr "Largeur de la barre de défilement de complétion"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Focus"
-msgstr "Remplir la surface"
+msgstr "Arrière de la barre quand active"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Grabber"
-msgstr ""
+msgstr "Poignée"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grabber Highlight"
-msgstr "Coloration syntaxique"
+msgstr "Poignée au survol"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grabber Pressed"
-msgstr "Pressé"
+msgstr "Poignée quand pressée"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Increment"
-msgstr "Voir environnement"
+msgstr "Incrémenteur"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Increment Highlight"
-msgstr "Coloration syntaxique"
+msgstr "Incrémenteur au survol"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Increment Pressed"
-msgstr ""
+msgstr "Incrémenteur quand pressé"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Decrement"
-msgstr ""
+msgstr "Décrémenteur"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Decrement Highlight"
-msgstr "Coloration syntaxique"
+msgstr "Décrémenteur au survol"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Decrement Pressed"
-msgstr ""
+msgstr "Décrémenteur quand pressé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Slider"
-msgstr "Mode collision"
+msgstr "Arrière de la barre"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Grabber Area"
-msgstr ""
+msgstr "Zone de la poignée"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Grabber Area Highlight"
-msgstr ""
+msgstr "Zone de la poignée au survol"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grabber Disabled"
-msgstr "Item désactivé"
+msgstr "Poignée quand désactivée"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Tick"
@@ -25432,24 +25351,20 @@ msgid "Scaleborder Size"
 msgstr "Pixels de bordure"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Font"
-msgstr "Police du Code"
+msgstr "Police du titre"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Color"
-msgstr "Couleur du Texte"
+msgstr "Couleur du titre"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Height"
-msgstr "En période de test"
+msgstr "Hauteur du titre"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close Highlight"
-msgstr "Éclairage direct"
+msgstr "\"Fermer\" au survol"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Close H Offset"
@@ -25460,29 +25375,24 @@ msgid "Close V Offset"
 msgstr "Fermer décalage V"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Parent Folder"
-msgstr "Créer un dossier"
+msgstr "Dossier parent"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Toggle Hidden"
-msgstr "Basculer les fichiers cachés"
+msgstr "Cacher/Montrer"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Panel Disabled"
-msgstr "Âgrafe désactivée"
+msgstr "Panneau désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Labeled Separator Left"
-msgstr "Séparateur nommé"
+msgstr "Séparateur nommé gauche"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Labeled Separator Right"
-msgstr "Séparateur nommé"
+msgstr "Séparateur nommé droit"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Font Separator"
@@ -25502,14 +25412,12 @@ msgid "V Separation"
 msgstr "Séparation V"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Selected Frame"
-msgstr "Sélectionner des Trames"
+msgstr "Trame sélectionnée"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Default Frame"
-msgstr "Défaut"
+msgstr "Trame par défaut"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25522,38 +25430,32 @@ msgid "Comment Focus"
 msgstr "Enregistrer"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Breakpoint"
-msgstr "Point d'arrêts"
+msgstr "Point d'arrêt"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Resizer"
-msgstr "Redimensionnable"
+msgstr "Redimensionneur"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close Color"
-msgstr "Couleurs"
+msgstr "Couleur du bouton Fermer"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Resizer Color"
-msgstr "Couleurs"
+msgstr "Couleur du redimensionneur"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Offset"
-msgstr "Décalage d’Octet"
+msgstr "Décalage du titre"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Close Offset"
 msgstr "Fermer de décalage"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Port Offset"
-msgstr "Décalage du Pivot"
+msgstr "Décalage du port"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25567,12 +25469,11 @@ msgstr "Sélectionner"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Cursor Unfocused"
-msgstr ""
+msgstr "Curseur quand inactif"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Button Pressed"
-msgstr "Pressé"
+msgstr "Bouton quand pressé"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25590,19 +25491,16 @@ msgid "Title Button Hover"
 msgstr "Bouton à bascule (toggle)"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Custom Button"
-msgstr "Nœud Personnalisé"
+msgstr "Bouton personnalisé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Custom Button Pressed"
-msgstr "Options de bus"
+msgstr "Bouton personnalisé quand pressé"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Custom Button Hover"
-msgstr "Nœud Personnalisé"
+msgstr "Bouton personnalisé au survol"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25625,9 +25523,8 @@ msgid "Title Button Color"
 msgstr "Couleur de la Sélection"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Guide Color"
-msgstr "Prélever une couleur"
+msgstr "Couleur des guides"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25635,75 +25532,64 @@ msgid "Drop Position Color"
 msgstr "Position du dock"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Relationship Line Color"
-msgstr "Couleur de la Ligne Actuelle"
+msgstr "Couleur des lignes de relation"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Custom Button Font Highlight"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Item Margin"
-msgstr "Définir la marge"
+msgstr "Marge d'élément"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Button Margin"
-msgstr "Bouton"
+msgstr "Marge de bouton"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Draw Relationship Lines"
-msgstr ""
+msgstr "Afficher les lignes de relation"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Draw Guides"
 msgstr "Afficher les guides"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Border"
-msgstr "Défilement Vertical"
+msgstr "Bordure de la barre de défilement"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Speed"
-msgstr "Décalage du Défilement"
+msgstr "Vitesse de défilement"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Icon Margin"
-msgstr "Définir la marge"
+msgstr "Marge d’icône"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Line Separation"
 msgstr "Séparation de line"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Tab FG"
-msgstr "Onglet 1"
+msgstr "Premier plan d'onglet"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Tab BG"
-msgstr "Onglet 1"
+msgstr "Arrière-plan d'onglet"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Tab Disabled"
-msgstr "Item désactivé"
+msgstr "Onglet désactivé"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Menu"
-msgstr ""
+msgstr "Menu"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Menu Highlight"
-msgstr "Éclairage direct"
+msgstr "Menu au survol"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25716,14 +25602,12 @@ msgid "Font Color BG"
 msgstr "Renommer l'item de couleur"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Side Margin"
-msgstr "Définir la marge"
+msgstr "Marge de coté"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Top Margin"
-msgstr "Définir la marge"
+msgstr "Marge en haut"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Label V Align FG"
@@ -25734,28 +25618,24 @@ msgid "Label V Align BG"
 msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Large"
-msgstr "Cible"
+msgstr "Grand"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Folder"
 msgstr "Dossier"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Folder Icon Modulate"
-msgstr "Forcer la modulation blanche"
+msgstr "Moduler l’icône du dossier"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "File Icon Modulate"
-msgstr "Mode Icône"
+msgstr "Moduler l'icône du fichier"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Files Disabled"
-msgstr "Âgrafe désactivée"
+msgstr "Fichiers désactivés"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25773,71 +25653,60 @@ msgid "H Width"
 msgstr "Étendu à Gauche"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Label Width"
-msgstr "Étendu à Gauche"
+msgstr "Largeur du label"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Screen Picker"
 msgstr "Sélecteur d'écran"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Add Preset"
-msgstr "Charger un préréglage"
+msgstr "Ajouter préréglage"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Color Hue"
-msgstr "Thème de l'éditeur"
+msgstr "Teinte de couleur"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Color Sample"
-msgstr "Couleurs"
+msgstr "Échantillon de couleur"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Preset BG"
-msgstr "Préréglage"
+msgstr "Préréglage arrière-plan"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Overbright Indicator"
-msgstr ""
+msgstr "Indicateur de surluminosité"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Preset FG"
-msgstr "Préréglage"
+msgstr "Préréglage avant-plan"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Preset BG Icon"
-msgstr "Préréglage"
+msgstr "Préréglage icône d'arrière-plan"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Normal Font"
-msgstr "Format"
+msgstr "Police normale"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Bold Font"
-msgstr "Police du Code"
+msgstr "Police en gras"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Italics Font"
-msgstr "Police Principale"
+msgstr "Police italique"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Bold Italics Font"
-msgstr ""
+msgstr "Police italique grasse"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Mono Font"
-msgstr "Police Principale"
+msgstr "Police monospace"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Table H Separation"
@@ -25848,62 +25717,52 @@ msgid "Table V Separation"
 msgstr "Séparation V de table"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Margin Left"
-msgstr "Définir la marge"
+msgstr "Marge à gauche"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Margin Top"
-msgstr "Définir la marge"
+msgstr "Marge en haut"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Margin Right"
-msgstr "Indenter vers la droite"
+msgstr "Marge à droite"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Margin Bottom"
-msgstr "Mode sélection"
+msgstr "Marge en bas"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Autohide"
-msgstr "Coupe automatique"
+msgstr "Cacher automatiquement"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Minus"
-msgstr ""
+msgstr "Moins"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "More"
-msgstr ""
+msgstr "Plus"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grid Minor"
-msgstr "Couleur de la Grille"
+msgstr "Grille secondaire"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Grid Major"
-msgstr "Grille"
+msgstr "Grille principale"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Selection Fill"
-msgstr "Sélection uniquement"
+msgstr "Remplissage de la sélection"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Selection Stroke"
-msgstr "Sélectionnez une propriété"
+msgstr "Trait de la sélection"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Activity"
-msgstr "Action"
+msgstr "Activité"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25916,40 +25775,35 @@ msgstr ""
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Port Grab Distance Horizontal"
-msgstr ""
+msgstr "Distance horizontale de capture de port"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Port Grab Distance Vertical"
-msgstr "WaitInstanceSignal"
+msgstr "Distance verticale de capture de port"
 
 #: scene/resources/dynamic_font.cpp
 msgid "Hinting"
-msgstr ""
+msgstr "Optimisation de rendu (hinting)"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Override Oversampling"
-msgstr "Remplacer l'item"
+msgstr "Remplacer le suréchantillonnage"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Font Path"
-msgstr "Focaliser le chemin"
+msgstr "Chemin de la police"
 
 #: scene/resources/dynamic_font.cpp
 msgid "Outline Size"
 msgstr "Taille de Contour"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Outline Color"
-msgstr "Fonction"
+msgstr "Couleur de contour"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Use Mipmaps"
-msgstr "Signaux"
+msgstr "Utiliser les Mipmaps"
 
 #: scene/resources/dynamic_font.cpp
 msgid "Extra Spacing"
@@ -25960,27 +25814,24 @@ msgid "Char"
 msgstr "Char"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Font Data"
-msgstr "Avec données"
+msgstr "Données de police"
 
 #: scene/resources/environment.cpp
 msgid "Background"
-msgstr ""
+msgstr "Arrière-plan"
 
 #: scene/resources/environment.cpp scene/resources/sky.cpp
 msgid "Sky"
-msgstr ""
+msgstr "Ciel"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sky Custom FOV"
-msgstr "Nœud Personnalisé"
+msgstr "Champ de vision personnalisé du ciel"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sky Orientation"
-msgstr "Documentation en ligne"
+msgstr "Orientation du ciel"
 
 #: scene/resources/environment.cpp
 msgid "Sky Rotation"
@@ -25996,17 +25847,15 @@ msgstr ""
 
 #: scene/resources/environment.cpp scene/resources/texture.cpp
 msgid "Camera Feed ID"
-msgstr ""
+msgstr "ID de flux de la caméra"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Ambient Light"
-msgstr "Indenter vers la droite"
+msgstr "Lumière ambiante"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sky Contribution"
-msgstr "Condition"
+msgstr "Contribution du ciel"
 
 #: scene/resources/environment.cpp
 msgid "Fog"
@@ -26021,79 +25870,68 @@ msgid "Sun Amount"
 msgstr "Quantité de Soleil"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth Enabled"
-msgstr "Profondeur"
+msgstr "Profondeur activée"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth Begin"
-msgstr "Profondeur"
+msgstr "Départ de la profondeur"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth End"
-msgstr "Profondeur"
+msgstr "Fin de la profondeur"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth Curve"
-msgstr "Scinder la courbe"
+msgstr "Courbe de profondeur"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Transmit Enabled"
-msgstr "Filtrer les signaux"
+msgstr "Transmission activée"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Transmit Curve"
-msgstr "Scinder la courbe"
+msgstr "Courbe de transmission"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Height Enabled"
-msgstr "Filtrer les signaux"
+msgstr "Hauteur activée"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Height Min"
-msgstr "Lumière"
+msgstr "Hauteur minimum"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Height Max"
-msgstr "Lumière"
+msgstr "Hauteur maximum"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Height Curve"
-msgstr "Scinder la courbe"
+msgstr "Courbe de hauteur"
 
 #: scene/resources/environment.cpp
 msgid "Tonemap"
 msgstr "Tonemap"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Exposure"
-msgstr "Exporter"
+msgstr "Exposition"
 
 #: scene/resources/environment.cpp
 msgid "White"
-msgstr ""
+msgstr "Blanc"
 
 #: scene/resources/environment.cpp
 msgid "Auto Exposure"
-msgstr ""
+msgstr "Exposition auto"
 
 #: scene/resources/environment.cpp
 msgid "Min Luma"
-msgstr ""
+msgstr "Lumen minimum"
 
 #: scene/resources/environment.cpp
 msgid "Max Luma"
-msgstr ""
+msgstr "Lumen maximum"
 
 #: scene/resources/environment.cpp
 #, fuzzy
@@ -26101,9 +25939,8 @@ msgid "SS Reflections"
 msgstr "Mettre à l'échelle la sélection"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Max Steps"
-msgstr "Pas"
+msgstr "Pas maximum"
 
 #: scene/resources/environment.cpp
 msgid "Fade In"
@@ -26114,17 +25951,16 @@ msgid "Fade Out"
 msgstr "Fondu sortant"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Depth Tolerance"
-msgstr "Profondeur"
+msgstr "Tolérance de profondeur"
 
 #: scene/resources/environment.cpp scene/resources/material.cpp
 msgid "Roughness"
-msgstr ""
+msgstr "Dureté"
 
 #: scene/resources/environment.cpp
 msgid "SSAO"
-msgstr ""
+msgstr "SSAO"
 
 #: scene/resources/environment.cpp
 msgid "Radius 2"
@@ -26132,7 +25968,7 @@ msgstr "Rayon 2"
 
 #: scene/resources/environment.cpp
 msgid "Intensity 2"
-msgstr ""
+msgstr "Intensité 2"
 
 #: scene/resources/environment.cpp scene/resources/material.cpp
 #, fuzzy
@@ -26146,15 +25982,15 @@ msgstr "Débogage du canal UV"
 
 #: scene/resources/environment.cpp
 msgid "Blur"
-msgstr ""
+msgstr "Flou"
 
 #: scene/resources/environment.cpp
 msgid "Edge Sharpness"
-msgstr ""
+msgstr "Netteté des bords"
 
 #: scene/resources/environment.cpp
 msgid "DOF Far Blur"
-msgstr ""
+msgstr "Flou d'éloigné de la profondeur de champ"
 
 #: scene/resources/environment.cpp scene/resources/material.cpp
 msgid "Distance"
@@ -26166,21 +26002,20 @@ msgstr "Transition"
 
 #: scene/resources/environment.cpp
 msgid "DOF Near Blur"
-msgstr ""
+msgstr "Flou de rapproché de la profondeur de champ"
 
 #: scene/resources/environment.cpp
 msgid "Glow"
-msgstr ""
+msgstr "Luisance"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Levels"
-msgstr "Développeurs"
+msgstr "Niveaux"
 
 #: scene/resources/environment.cpp
 #: servers/audio/effects/audio_effect_chorus.cpp
 msgid "1"
-msgstr ""
+msgstr "1"
 
 #: scene/resources/environment.cpp
 #: servers/audio/effects/audio_effect_chorus.cpp
@@ -26378,19 +26213,16 @@ msgid "Use Alpha Scissor"
 msgstr "Utiliser la découpe alpha"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Particles Anim"
-msgstr "Particules"
+msgstr "Animation de particules"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "H Frames"
-msgstr "Image %"
+msgstr "Trames H"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "V Frames"
-msgstr "Image %"
+msgstr "Trames V"
 
 #: scene/resources/material.cpp
 msgid "Albedo"
@@ -26398,25 +26230,23 @@ msgstr "Albédo"
 
 #: scene/resources/material.cpp
 msgid "Metallic"
-msgstr ""
+msgstr "Métallique"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Texture Channel"
-msgstr "RegionDeTexture"
+msgstr "Canal de texture"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Emission"
-msgstr "Masque d'émission"
+msgstr "Émission"
 
 #: scene/resources/material.cpp
 msgid "On UV2"
-msgstr ""
+msgstr "Sur UV2"
 
 #: scene/resources/material.cpp
 msgid "NormalMap"
-msgstr ""
+msgstr "NormalMap"
 
 #: scene/resources/material.cpp
 msgid "Rim"
@@ -26429,20 +26259,19 @@ msgstr "Effacer"
 
 #: scene/resources/material.cpp
 msgid "Gloss"
-msgstr ""
+msgstr "Éclat"
 
 #: scene/resources/material.cpp
 msgid "Anisotropy"
-msgstr ""
+msgstr "Anisotropie"
 
 #: scene/resources/material.cpp
 msgid "Flowmap"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Ambient Occlusion"
-msgstr "Occlusion"
+msgstr "Occlusion ambiante"
 
 #: scene/resources/material.cpp
 msgid "Deep Parallax"
@@ -26469,7 +26298,7 @@ msgstr "Retourner le Portal"
 
 #: scene/resources/material.cpp
 msgid "Subsurf Scatter"
-msgstr ""
+msgstr "Transluminescence"
 
 #: scene/resources/material.cpp
 msgid "Transmission"
@@ -26481,30 +26310,27 @@ msgstr "Réfraction"
 
 #: scene/resources/material.cpp
 msgid "Detail"
-msgstr ""
+msgstr "Détail"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "UV Layer"
-msgstr "Calque"
+msgstr "Couche UV"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "UV1"
-msgstr "UV"
+msgstr "UV1"
 
 #: scene/resources/material.cpp
 msgid "Triplanar"
-msgstr ""
+msgstr "Triplanaire"
 
 #: scene/resources/material.cpp
 msgid "Triplanar Sharpness"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "UV2"
-msgstr "UV"
+msgstr "UV2"
 
 #: scene/resources/material.cpp
 #, fuzzy
@@ -26516,9 +26342,8 @@ msgid "Distance Fade"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Async Mode"
-msgstr "Mode navigation"
+msgstr "Mode asynchrone"
 
 #: scene/resources/mesh.cpp
 #, fuzzy
@@ -26530,14 +26355,12 @@ msgid "Custom AABB"
 msgstr ""
 
 #: scene/resources/mesh_library.cpp
-#, fuzzy
 msgid "Mesh Transform"
-msgstr "Transformation"
+msgstr "Transformation de Mesh"
 
 #: scene/resources/mesh_library.cpp
-#, fuzzy
 msgid "NavMesh Transform"
-msgstr "Supprimer la transformation"
+msgstr "Transformation de NavMesh"
 
 #: scene/resources/multimesh.cpp
 msgid "Color Format"
@@ -26552,22 +26375,20 @@ msgid "Custom Data Format"
 msgstr ""
 
 #: scene/resources/multimesh.cpp
-#, fuzzy
 msgid "Instance Count"
-msgstr "Instance"
+msgstr "Nombre d'instances"
 
 #: scene/resources/multimesh.cpp
 msgid "Visible Instance Count"
-msgstr ""
+msgstr "Nombre d'instances visibles"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Sampling"
 msgstr "Échantillonnage"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Partition Type"
-msgstr "Définir type de variable"
+msgstr "Type de partition"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Parsed Geometry Type"
@@ -26584,12 +26405,11 @@ msgstr "Source"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Cells"
-msgstr ""
+msgstr "Cellules"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Agents"
-msgstr "Segments"
+msgstr "Agents"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Max Climb"
@@ -26597,12 +26417,11 @@ msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Max Slope"
-msgstr ""
+msgstr "Pente maximale"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Regions"
-msgstr "Région"
+msgstr "Régions"
 
 #: scene/resources/navigation_mesh.cpp
 #, fuzzy
@@ -26611,7 +26430,7 @@ msgstr "Fusionner depuis la scène"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Edges"
-msgstr ""
+msgstr "Arêtes"
 
 #: scene/resources/navigation_mesh.cpp
 #, fuzzy
@@ -26623,9 +26442,8 @@ msgid "Verts Per Poly"
 msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Details"
-msgstr "Afficher par défaut"
+msgstr "Détails"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Sample Distance"
@@ -26660,34 +26478,31 @@ msgstr "Décalage :"
 
 #: scene/resources/occluder_shape.cpp
 msgid "Spheres"
-msgstr ""
+msgstr "Sphères"
 
 #: scene/resources/occluder_shape.cpp
 msgid "OccluderShapeSphere Set Spheres"
 msgstr "Définir les sphères pour OccluderShapeSphere"
 
 #: scene/resources/occluder_shape_polygon.cpp
-#, fuzzy
 msgid "Polygon Points"
-msgstr "Polygones"
+msgstr "Points de polygone"
 
 #: scene/resources/occluder_shape_polygon.cpp
-#, fuzzy
 msgid "Hole Points"
-msgstr "Déplacer de points"
+msgstr "Points de trou"
 
 #: scene/resources/packed_scene.cpp
 msgid "Bundled"
-msgstr ""
+msgstr "Empaqueté"
 
 #: scene/resources/particles_material.cpp
 msgid "Trail"
-msgstr ""
+msgstr "Traînée"
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Divisor"
-msgstr "Diviser %s"
+msgstr "Diviseur"
 
 #: scene/resources/particles_material.cpp
 #, fuzzy
@@ -26713,9 +26528,8 @@ msgid "Color Texture"
 msgstr "Thème de l'éditeur"
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Point Count"
-msgstr "Ajouter un port d'entrée"
+msgstr "Nombre de points"
 
 #: scene/resources/particles_material.cpp
 msgid "Scale Random"
@@ -26732,16 +26546,15 @@ msgstr ""
 
 #: scene/resources/physics_material.cpp
 msgid "Absorbent"
-msgstr ""
+msgstr "Absorbant"
 
 #: scene/resources/plane_shape.cpp
 msgid "Plane"
 msgstr "Plan"
 
 #: scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Flip Faces"
-msgstr "Retourner les Portals"
+msgstr "Retourner les faces"
 
 #: scene/resources/primitive_meshes.cpp
 msgid "Mid Height"
@@ -26749,15 +26562,15 @@ msgstr ""
 
 #: scene/resources/primitive_meshes.cpp
 msgid "Subdivide Width"
-msgstr ""
+msgstr "Largeur de subdivision"
 
 #: scene/resources/primitive_meshes.cpp
 msgid "Subdivide Height"
-msgstr ""
+msgstr "Hauteur de subdivision"
 
 #: scene/resources/primitive_meshes.cpp
 msgid "Subdivide Depth"
-msgstr ""
+msgstr "Profondeur de subdivision"
 
 #: scene/resources/primitive_meshes.cpp
 msgid "Top Radius"
@@ -26769,43 +26582,38 @@ msgid "Bottom Radius"
 msgstr "En bas à droite"
 
 #: scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Left To Right"
-msgstr "En haut à droite"
+msgstr "Gauche à droite"
 
 #: scene/resources/primitive_meshes.cpp
 msgid "Is Hemisphere"
-msgstr ""
+msgstr "Est une hémisphère"
 
 #: scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Curve Step"
-msgstr "Scinder la courbe"
+msgstr "Pas de la courbe"
 
 #: scene/resources/ray_shape.cpp scene/resources/segment_shape_2d.cpp
 msgid "Slips On Slope"
-msgstr ""
+msgstr "Glisse sur pente"
 
 #: scene/resources/segment_shape_2d.cpp
 msgid "A"
-msgstr ""
+msgstr "A"
 
 #: scene/resources/shape_2d.cpp
 msgid "Custom Solver Bias"
 msgstr ""
 
 #: scene/resources/skin.cpp
-#, fuzzy
 msgid "Bind Count"
-msgstr "Ajouter un port d'entrée"
+msgstr "Nombre de liaisons"
 
 #: scene/resources/skin.cpp
-#, fuzzy
 msgid "Bind"
 msgstr "Liaison"
 
 #: scene/resources/skin.cpp
-#, fuzzy
 msgid "Bone"
 msgstr "Os"
 
@@ -26815,53 +26623,47 @@ msgstr "Taille du rayonnement"
 
 #: scene/resources/sky.cpp
 msgid "Panorama"
-msgstr ""
+msgstr "Panorama"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Top Color"
-msgstr "Étage suivant"
+msgstr "Couleur du haut"
 
 #: scene/resources/sky.cpp
 msgid "Horizon Color"
 msgstr "Couleur de l’Horizon"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Ground"
-msgstr "Groupé"
+msgstr "Sol"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Bottom Color"
-msgstr "Signets"
+msgstr "Couleur du bas"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Sun"
-msgstr "Lancer"
+msgstr "Soleil"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Latitude"
-msgstr "Remplacer"
+msgstr "Latitude"
 
 #: scene/resources/sky.cpp
 msgid "Longitude"
-msgstr ""
+msgstr "Longitude"
 
 #: scene/resources/sky.cpp
 msgid "Angle Min"
-msgstr ""
+msgstr "Angle min"
 
 #: scene/resources/sky.cpp
 msgid "Angle Max"
-msgstr ""
+msgstr "Angle max"
 
 #: scene/resources/style_box.cpp
-#, fuzzy
 msgid "Content Margin"
-msgstr "Définir la marge"
+msgstr "Marge de contenu"
 
 #: scene/resources/style_box.cpp
 #, fuzzy
@@ -26870,7 +26672,7 @@ msgstr "Développer tout"
 
 #: scene/resources/style_box.cpp
 msgid "Skew"
-msgstr ""
+msgstr "Biseau"
 
 #: scene/resources/style_box.cpp
 #, fuzzy
@@ -26883,7 +26685,7 @@ msgstr ""
 
 #: scene/resources/style_box.cpp
 msgid "Anti Aliasing"
-msgstr ""
+msgstr "Anticrénelage"
 
 #: scene/resources/style_box.cpp
 msgid "Grow Begin"
@@ -26899,81 +26701,68 @@ msgid "Load Path"
 msgstr "Charger un préréglage"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Base Texture"
-msgstr "Supprimer la texture"
+msgstr "Texture de base"
 
 #: scene/resources/texture.cpp
 msgid "Image Size"
 msgstr "Taille de l'image"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Side"
-msgstr "Afficher les guides"
+msgstr "Coté"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Front"
-msgstr "Vue de devant"
+msgstr "Avant"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Back"
-msgstr "Retourner"
+msgstr "Arrière"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Storage Mode"
-msgstr "Mode mise à l'échelle"
+msgstr "Mode de stockage"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Lossy Storage Quality"
-msgstr "Capturer"
+msgstr "Qualité de stockage avec pertes"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "From"
-msgstr "Remplir à Partir de"
+msgstr "De"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "To"
-msgstr "Dessus"
+msgstr "À"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Base"
-msgstr "Changer le type de base"
+msgstr "Base"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Current Frame"
-msgstr "Nom de la scène courante"
+msgstr "Trame actuelle"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Pause"
-msgstr "Mode navigation"
+msgstr "Pause"
 
 #: scene/resources/texture.cpp
 msgid "Which Feed"
 msgstr ""
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Camera Is Active"
-msgstr "Sensible à la casse"
+msgstr "La caméra est active"
 
 #: scene/resources/theme.cpp
-#, fuzzy
 msgid "Default Font"
-msgstr "Défaut"
+msgstr "Police par défaut"
 
 #: scene/resources/visual_shader.cpp
 msgid "Output Port For Preview"
-msgstr ""
+msgstr "Port de sortie de l'aperçu"
 
 #: scene/resources/visual_shader.cpp
 #, fuzzy
@@ -26986,29 +26775,24 @@ msgid "Cull"
 msgstr "Mode Règle"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Diffuse"
-msgstr "Mode navigation"
+msgstr "Diffus"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Async"
-msgstr "Mode navigation"
+msgstr "Asynchrone"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Modes"
-msgstr "Mode"
+msgstr "Modes"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Input Name"
-msgstr "Contrôles"
+msgstr "Nom de l'entrée"
 
 #: scene/resources/visual_shader.cpp
-#, fuzzy
 msgid "Uniform Name"
-msgstr "Définir le nom de l'uniforme"
+msgstr "Nom de l'uniforme"
 
 #: scene/resources/visual_shader_nodes.cpp
 msgid ""
@@ -27024,16 +26808,15 @@ msgstr "Source invalide pour la prévisualisation."
 
 #: scene/resources/visual_shader_nodes.cpp
 msgid "Invalid source for shader."
-msgstr "Source invalide pour la forme."
+msgstr "Source invalide pour le shader."
 
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Texture Type"
-msgstr "RegionDeTexture"
+msgstr "Type de texture"
 
 #: scene/resources/visual_shader_nodes.cpp
 msgid "Cube Map"
-msgstr ""
+msgstr "Textures en cube"
 
 #: scene/resources/visual_shader_nodes.cpp
 #, fuzzy
@@ -27041,42 +26824,36 @@ msgid "Default Value Enabled"
 msgstr "Profil des fonctionnalités de Godot"
 
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Default Value"
-msgstr "Changer nom de l'entrée"
+msgstr "Valeur par défaut"
 
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Color Default"
-msgstr "Charger défaut"
+msgstr "Couleur par défaut"
 
 #: scene/resources/visual_shader_nodes.cpp
 msgid "Invalid comparison function for that type."
 msgstr "Fonction de comparaison invalide pour ce type."
 
 #: scene/resources/world.cpp
-#, fuzzy
 msgid "Fallback Environment"
-msgstr "Voir environnement"
+msgstr "Environnement de repli"
 
 #: scene/resources/world.cpp
-#, fuzzy
 msgid "Scenario"
-msgstr "Scène"
+msgstr "Scénario"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Navigation Map"
-msgstr "Navigation"
+msgstr "Carte de navigation"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
 msgid "Direct Space State"
 msgstr ""
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Gravity Vector"
-msgstr "Aperçu par défaut"
+msgstr "Vecteur de gravité par défaut"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
 #, fuzzy
@@ -27093,14 +26870,12 @@ msgid "Default Map Up"
 msgstr "Défaut"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Cell Size"
-msgstr "Aperçu par défaut"
+msgstr "Taille de cellule par défaut"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Cell Height"
-msgstr "En période de test"
+msgstr "Hauteur de cellule par défaut"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
 msgid "Default Edge Connection Margin"
@@ -27108,34 +26883,31 @@ msgstr "Marge de connexion des bords par défaut"
 
 #: scene/resources/world_2d.cpp
 msgid "Canvas"
-msgstr ""
+msgstr "Canevas"
 
 #: servers/arvr/arvr_interface.cpp
 msgid "Is Primary"
-msgstr ""
+msgstr "Est primaire"
 
 #: servers/arvr/arvr_interface.cpp
-#, fuzzy
 msgid "Is Initialized"
-msgstr "Initialiser"
+msgstr "Est initialisé"
 
 #: servers/arvr/arvr_interface.cpp
 msgid "AR"
-msgstr ""
+msgstr "AR"
 
 #: servers/arvr/arvr_interface.cpp
 msgid "Is Anchor Detection Enabled"
 msgstr ""
 
 #: servers/arvr_server.cpp
-#, fuzzy
 msgid "Primary Interface"
-msgstr "Interface utilisateur"
+msgstr "Interface primaire"
 
 #: servers/audio/audio_stream.cpp
-#, fuzzy
 msgid "Audio Stream"
-msgstr "Item radio"
+msgstr "Flux audio"
 
 #: servers/audio/audio_stream.cpp
 msgid "Random Pitch"
@@ -27145,46 +26917,45 @@ msgstr "Pitch Aléatoire"
 #: servers/audio/effects/audio_effect_spectrum_analyzer.cpp
 #: servers/audio/effects/audio_stream_generator.cpp
 msgid "Buffer Length"
-msgstr ""
+msgstr "Taille du tampon"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 msgid "Voice Count"
-msgstr ""
+msgstr "Nombre de voix"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_delay.cpp
 #: servers/audio/effects/audio_effect_reverb.cpp
 msgid "Dry"
-msgstr ""
+msgstr "Sec"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_reverb.cpp
 msgid "Wet"
-msgstr ""
+msgstr "Humide"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 msgid "Voice"
-msgstr ""
+msgstr "Voix"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_delay.cpp
 msgid "Delay (ms)"
-msgstr ""
+msgstr "Délai (ms)"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_phaser.cpp
 msgid "Rate Hz"
-msgstr ""
+msgstr "Débit (Hz)"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
-#, fuzzy
 msgid "Depth (ms)"
-msgstr "Profondeur"
+msgstr "Profondeur (ms)"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_delay.cpp
 msgid "Level dB"
-msgstr ""
+msgstr "Niveau (dB)"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_delay.cpp
@@ -27195,16 +26966,15 @@ msgstr "Pan"
 #: servers/audio/effects/audio_effect_compressor.cpp
 #: servers/audio/effects/audio_effect_filter.cpp
 msgid "Gain"
-msgstr ""
+msgstr "Gain"
 
 #: servers/audio/effects/audio_effect_compressor.cpp
 msgid "Attack (µs)"
-msgstr ""
+msgstr "Attaque (µs)"
 
 #: servers/audio/effects/audio_effect_compressor.cpp
-#, fuzzy
 msgid "Release (ms)"
-msgstr "Publication (release)"
+msgstr "Relâche (ms)"
 
 #: servers/audio/effects/audio_effect_compressor.cpp
 msgid "Mix"
@@ -27225,36 +26995,32 @@ msgstr ""
 #: servers/audio/effects/audio_effect_delay.cpp
 #: servers/audio/effects/audio_effect_phaser.cpp
 #: servers/audio/effects/audio_effect_reverb.cpp
-#, fuzzy
 msgid "Feedback"
-msgstr "Envoyez vos retours sur la documentation"
+msgstr "Larsen"
 
 #: servers/audio/effects/audio_effect_delay.cpp
-#, fuzzy
 msgid "Low-pass"
-msgstr "Contourner"
+msgstr "Passe-bas"
 
 #: servers/audio/effects/audio_effect_distortion.cpp
 msgid "Pre Gain"
-msgstr ""
+msgstr "Pré-gain"
 
 #: servers/audio/effects/audio_effect_distortion.cpp
 msgid "Keep Hf Hz"
-msgstr ""
+msgstr "Garder haute fréquences (Hz)"
 
 #: servers/audio/effects/audio_effect_distortion.cpp
 msgid "Drive"
 msgstr ""
 
 #: servers/audio/effects/audio_effect_distortion.cpp
-#, fuzzy
 msgid "Post Gain"
-msgstr "Post"
+msgstr "Post-gain"
 
 #: servers/audio/effects/audio_effect_filter.cpp
-#, fuzzy
 msgid "Resonance"
-msgstr "Ressource"
+msgstr "Résonance"
 
 #: servers/audio/effects/audio_effect_limiter.cpp
 msgid "Ceiling dB"
@@ -27424,22 +27190,19 @@ msgstr "Collisions avec les zones"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Motion Remainder"
-msgstr ""
+msgstr "Reste de mouvement"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Point"
-msgstr "Mode collision"
+msgstr "Point de collision"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Normal"
-msgstr "Mode collision"
+msgstr "Normale de collision"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Depth"
-msgstr "Mode collision"
+msgstr "Profondeur de collision"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 #, fuzzy
@@ -27452,18 +27215,16 @@ msgid "Collision Unsafe Fraction"
 msgstr "Mode collision"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Physics Engine"
-msgstr "Image physique %"
+msgstr "Moteur physique"
 
 #: servers/physics_server.cpp
-#, fuzzy
 msgid "Center Of Mass"
-msgstr "Centré à Gauche"
+msgstr "Centre de la masse"
 
 #: servers/physics_server.cpp
 msgid "Principal Inertia Axes"
-msgstr ""
+msgstr "Axes principaux d'inertie"
 
 #: servers/visual/shader_language.cpp
 msgid "Varying may not be assigned in the '%s' function."
@@ -27509,47 +27270,40 @@ msgid "Render Loop Enabled"
 msgstr "Filtrer les signaux"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "VRAM Compression"
-msgstr "Expression"
+msgstr "Compression VRAM"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import BPTC"
-msgstr "Importation"
+msgstr "Importer BPTC"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import S3TC"
-msgstr "Importation"
+msgstr "Importer S3TC"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import ETC"
-msgstr "Importation"
+msgstr "Importer ETC"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import ETC2"
-msgstr "Importation"
+msgstr "Importer ETC2"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Import PVRTC"
-msgstr "Importer un thème"
+msgstr "Importer PVRTC"
 
 #: servers/visual_server.cpp
 msgid "Lossless Compression"
-msgstr ""
+msgstr "Compression sans perte"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Force PNG"
-msgstr "Force-pousser"
+msgstr "Forcer PNG"
 
 #: servers/visual_server.cpp
 msgid "WebP Compression Level"
-msgstr ""
+msgstr "Niveau de compression WebP"
 
 #: servers/visual_server.cpp
 msgid "Time Rollover Secs"
@@ -27577,14 +27331,12 @@ msgid "Quadrant 3 Subdiv"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Shadows"
-msgstr "Ombrage"
+msgstr "Ombres"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Filter Mode"
-msgstr "Filtrer les nœuds"
+msgstr "Mode de filtrage"
 
 #: servers/visual_server.cpp
 #, fuzzy
@@ -27593,16 +27345,15 @@ msgstr "Centrer sur la sélection"
 
 #: servers/visual_server.cpp
 msgid "High Quality GGX"
-msgstr ""
+msgstr "GGX haute qualité"
 
 #: servers/visual_server.cpp
 msgid "Irradiance Max Size"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Shading"
-msgstr "Remplissage(Padding)"
+msgstr "Ombrage"
 
 #: servers/visual_server.cpp
 msgid "Force Vertex Shading"
@@ -27610,11 +27361,11 @@ msgstr ""
 
 #: servers/visual_server.cpp
 msgid "Force Lambert Over Burley"
-msgstr ""
+msgstr "Forcer Lambert au lieu de Burley"
 
 #: servers/visual_server.cpp
 msgid "Force Blinn Over GGX"
-msgstr ""
+msgstr "Forcer Blinn au lieu de GGX"
 
 #: servers/visual_server.cpp
 msgid "Mesh Storage"
@@ -27639,15 +27390,15 @@ msgstr ""
 
 #: servers/visual_server.cpp
 msgid "Anisotropic Filter Level"
-msgstr ""
+msgstr "Niveau de filtrage anisotropique"
 
 #: servers/visual_server.cpp
 msgid "Use Nearest Mipmap Filter"
-msgstr ""
+msgstr "Utiliser le filtre Mipmap le plus proche"
 
 #: servers/visual_server.cpp
 msgid "Skinning"
-msgstr ""
+msgstr "Enveloppement"
 
 #: servers/visual_server.cpp
 msgid "Software Skinning Fallback"
@@ -27674,9 +27425,8 @@ msgid "Batching Send Null"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Batching Stream"
-msgstr "Renommer par lot"
+msgstr "Flux de traitement en lot"
 
 #: servers/visual_server.cpp
 msgid "Legacy Orphan Buffers"
@@ -27724,7 +27474,7 @@ msgstr "Taille de tampon des lots"
 
 #: servers/visual_server.cpp
 msgid "Item Reordering Lookahead"
-msgstr ""
+msgstr "Anticipation de réorganisation d’éléments"
 
 #: servers/visual_server.cpp
 msgid "Flash Batching"
diff --git a/editor/translations/ga.po b/editor/translations/ga.po
index 87e005f5f3..246c04dc63 100644
--- a/editor/translations/ga.po
+++ b/editor/translations/ga.po
@@ -4360,6 +4360,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7057,7 +7058,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14756,18 +14758,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nód Beochana"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nód Beochana"
 
 #: editor/scene_tree_dock.cpp
@@ -14957,6 +14959,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nód Beochana"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15020,6 +15027,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16823,6 +16834,18 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18530,6 +18553,10 @@ msgstr "Cruthaigh"
 msgid "Custom BG Color"
 msgstr "Cruthaigh"
 
+#: platform/iphone/export/export.cpp
+msgid "Export Icons"
+msgstr ""
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19326,6 +19353,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/gl.po b/editor/translations/gl.po
index 29db0e8063..2445ec4783 100644
--- a/editor/translations/gl.po
+++ b/editor/translations/gl.po
@@ -4631,6 +4631,7 @@ msgstr "Ferramentas varias do proxecto ou escena."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Proxecto"
 
@@ -7532,7 +7533,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15575,18 +15577,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nome do Nodo:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nome do Nodo:"
 
 #: editor/scene_tree_dock.cpp
@@ -15779,6 +15781,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nome do Nodo:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15842,6 +15849,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Renomear Nodo"
 
@@ -17741,6 +17752,21 @@ msgstr "Resolución á Metade"
 msgid "Auto Update Project"
 msgstr "Proxecto Sen Nome"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Amosar Todo"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Elixir un Directorio"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Elixir un Directorio"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19565,6 +19591,11 @@ msgstr "Cortar Nodos"
 msgid "Custom BG Color"
 msgstr "Cortar Nodos"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Expandir Todo"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20414,6 +20445,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/he.po b/editor/translations/he.po
index abaada7880..e0a690c9b4 100644
--- a/editor/translations/he.po
+++ b/editor/translations/he.po
@@ -22,13 +22,14 @@
 # Ram Tourgeman <ramtorgeman@gmail.com>, 2021.
 # Shailee Eliyahu <dev.sle.il@gmail.com>, 2021.
 # Mati Borlak <matiborlak@gmail.com>, 2022.
+# Tamir Livneh <fkeyzuwu@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-06-08 06:48+0000\n"
-"Last-Translator: Mati Borlak <matiborlak@gmail.com>\n"
+"PO-Revision-Date: 2022-09-05 11:17+0000\n"
+"Last-Translator: Tamir Livneh <fkeyzuwu@gmail.com>\n"
 "Language-Team: Hebrew <https://hosted.weblate.org/projects/godot-engine/"
 "godot/he/>\n"
 "Language: he\n"
@@ -37,7 +38,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=4; plural=(n == 1) ? 0 : ((n == 2) ? 1 : ((n > 10 && "
 "n % 10 == 0) ? 2 : 3));\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -4545,6 +4546,7 @@ msgstr "כלים שונים למיזם או למגוון סצנות."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "מיזם"
 
@@ -5026,7 +5028,7 @@ msgstr "יוצרים"
 #: editor/editor_plugin_settings.cpp
 #: modules/gdnative/gdnative_library_singleton_editor.cpp
 msgid "Status"
-msgstr ""
+msgstr "מצב"
 
 #: editor/editor_profiler.cpp
 msgid "Measure:"
@@ -5091,9 +5093,8 @@ msgid "Profiler Frame Max Functions"
 msgstr "שינוי שם פונקציה"
 
 #: editor/editor_properties.cpp
-#, fuzzy
 msgid "Edit Text:"
-msgstr "חברים"
+msgstr "ערוך טקסט:"
 
 #: editor/editor_properties.cpp editor/script_create_dialog.cpp
 #: scene/resources/default_theme/default_theme.cpp
@@ -5105,7 +5106,7 @@ msgstr ""
 #: scene/3d/collision_object.cpp scene/3d/soft_body.cpp
 #: scene/main/canvas_layer.cpp
 msgid "Layer"
-msgstr ""
+msgstr "שכבה"
 
 #: editor/editor_properties.cpp
 msgid "Bit %d, value %d"
@@ -5160,19 +5161,19 @@ msgstr ""
 #: editor/editor_properties_array_dict.cpp
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Remove Item"
-msgstr ""
+msgstr "הסר פריט"
 
 #: editor/editor_properties_array_dict.cpp
 msgid "New Key:"
-msgstr ""
+msgstr "מפתח חדש:"
 
 #: editor/editor_properties_array_dict.cpp
 msgid "New Value:"
-msgstr ""
+msgstr "ערך חדש:"
 
 #: editor/editor_properties_array_dict.cpp
 msgid "Add Key/Value Pair"
-msgstr ""
+msgstr "הוסף זוג מפתח/ערך"
 
 #: editor/editor_resource_picker.cpp
 msgid ""
@@ -5186,7 +5187,7 @@ msgstr ""
 
 #: editor/editor_resource_picker.cpp editor/property_editor.cpp
 msgid "Make Unique"
-msgstr ""
+msgstr "הפוך לייחודי"
 
 #: editor/editor_resource_picker.cpp
 #: editor/plugins/animation_blend_space_1d_editor.cpp
@@ -5200,7 +5201,7 @@ msgstr ""
 #: editor/plugins/tile_map_editor_plugin.cpp editor/property_editor.cpp
 #: editor/scene_tree_dock.cpp scene/gui/line_edit.cpp scene/gui/text_edit.cpp
 msgid "Paste"
-msgstr "הדבקה"
+msgstr "הדבק"
 
 #: editor/editor_resource_picker.cpp editor/property_editor.cpp
 #, fuzzy
@@ -5233,7 +5234,7 @@ msgstr "הפעלה"
 
 #: editor/editor_resource_picker.cpp editor/property_editor.cpp
 msgid "New Script"
-msgstr ""
+msgstr "סקריפט חדש"
 
 #: editor/editor_resource_picker.cpp editor/scene_tree_dock.cpp
 #, fuzzy
@@ -7474,7 +7475,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15677,18 +15679,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "הפיכה למקומי"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "שם המפרק:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "השם כבר בשימוש של פונקציה/משתנה/אות אחר:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "שם המפרק:"
 
 #: editor/scene_tree_dock.cpp
@@ -15882,6 +15885,11 @@ msgid "Button Group"
 msgstr "קבוצת לחצנים"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "שם המפרק:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(מתחבר מ)"
 
@@ -15957,6 +15965,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "שם מפרק לא חוקי, התווים הבאים אינם מותרים:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "שינוי שם מפרק"
 
@@ -17864,6 +17876,21 @@ msgstr "מילוי הבחירה"
 msgid "Auto Update Project"
 msgstr "ייצוא מיזם"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "הצג הכל"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "נא לבחור תיקייה"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "נא לבחור תיקייה"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "סוף מחסנית מעקב לחריגה פנימית"
@@ -19716,6 +19743,11 @@ msgstr "גזירת מפרקים"
 msgid "Custom BG Color"
 msgstr "גזירת מפרקים"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "להרחיב הכול"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20567,6 +20599,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "שם קצר של חבילה לא חוקי."
 
diff --git a/editor/translations/hi.po b/editor/translations/hi.po
index e5a41404d0..5e3b28ff79 100644
--- a/editor/translations/hi.po
+++ b/editor/translations/hi.po
@@ -4549,6 +4549,7 @@ msgstr "विविध परियोजना या दृश्य-व्�
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "परियोजना"
 
@@ -7430,7 +7431,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15380,18 +15382,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "नोड का नाम:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "नोड का नाम:"
 
 #: editor/scene_tree_dock.cpp
@@ -15588,6 +15590,11 @@ msgstr ""
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "नोड का नाम:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "कनेक्ट करने के लिए संकेत:"
 
@@ -15652,6 +15659,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17527,6 +17538,21 @@ msgstr "सभी खंड"
 msgid "Auto Update Project"
 msgstr "परियोजना"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "सब दिखाइए"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "डायरेक्टरी चुनें"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "डायरेक्टरी चुनें"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19330,6 +19356,11 @@ msgstr "प्रतिलिपि"
 msgid "Custom BG Color"
 msgstr "प्रतिलिपि"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "सभी बढाय"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20171,6 +20202,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "गलत फॉण्ट का आकार |"
diff --git a/editor/translations/hr.po b/editor/translations/hr.po
index e473c6556c..b634136191 100644
--- a/editor/translations/hr.po
+++ b/editor/translations/hr.po
@@ -4437,6 +4437,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7213,7 +7214,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15012,18 +15014,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Naziv Čvora(node):"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Naziv Čvora(node):"
 
 #: editor/scene_tree_dock.cpp
@@ -15213,6 +15215,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Naziv Čvora(node):"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15276,6 +15283,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17118,6 +17129,21 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "Uredi vezu:"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Način reprodukcije:"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Otvori direktorij"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Otvori direktorij"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18871,6 +18897,11 @@ msgstr "Funkcije"
 msgid "Custom BG Color"
 msgstr "Funkcije"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Izvoz"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19686,6 +19717,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/hu.po b/editor/translations/hu.po
index b35be76368..996249e619 100644
--- a/editor/translations/hu.po
+++ b/editor/translations/hu.po
@@ -4662,6 +4662,7 @@ msgstr "Egyéb projekt- vagy Scene-szintű eszközök."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -7570,7 +7571,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15520,18 +15522,19 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Node neve:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "A nevet már használja egy függvény/változó/jelzés:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Node neve:"
 
 #: editor/scene_tree_dock.cpp
@@ -15723,6 +15726,11 @@ msgid "Button Group"
 msgstr "Gombcsoport"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Node neve:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Csatlakozás Innen)"
 
@@ -15786,6 +15794,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17698,6 +17710,21 @@ msgstr "Kijelölés kitöltése"
 msgid "Auto Update Project"
 msgstr "Névtelen projekt"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Az összes megjelenítése"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Válasszon egy Könyvtárat"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Válasszon egy Könyvtárat"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19524,6 +19551,11 @@ msgstr "Node-ok kivágása"
 msgid "Custom BG Color"
 msgstr "Node-ok kivágása"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Összes kinyitása"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20374,6 +20406,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Érvénytelen rövid csomagnév."
 
diff --git a/editor/translations/id.po b/editor/translations/id.po
index 7d839357cd..696799d370 100644
--- a/editor/translations/id.po
+++ b/editor/translations/id.po
@@ -4576,6 +4576,7 @@ msgstr "Perkakas macam-macam proyek atau lingkup skena."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Proyek"
 
@@ -7470,7 +7471,8 @@ msgid "8 Bit"
 msgstr "8 Bit"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15624,18 +15626,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Jadikan Local"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nama Unik"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Nama telah digunakan oleh fungsi/variabel/sinyal yang lain:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nama Unik"
 
 #: editor/scene_tree_dock.cpp
@@ -15839,6 +15842,11 @@ msgid "Button Group"
 msgstr "Tombol Grup"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nama Unik"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Menghubungkan dari)"
 
@@ -15914,6 +15922,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Nama node tidak valid, karakter berikut tidak diperbolehkan:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Ubah Nama Node"
 
@@ -17795,6 +17807,21 @@ msgstr "Isi Pilihan"
 msgid "Auto Update Project"
 msgstr "Proyek Tanpa Nama"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Nama Tampilan"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Pilih sebuah Direktori"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Pilih sebuah Direktori"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Akhir dari inner exception stack trace"
@@ -19648,6 +19675,11 @@ msgstr "Potong Node"
 msgid "Custom BG Color"
 msgstr "Potong Node"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Ikon Ekspor"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20510,6 +20542,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr "Tampilkan Nama Pada Persegi 310 X 310"
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Nama pendek paket tidak valid."
 
diff --git a/editor/translations/ig.po b/editor/translations/ig.po
new file mode 100644
index 0000000000..8d96de35f3
--- /dev/null
+++ b/editor/translations/ig.po
@@ -0,0 +1,26106 @@
+# Igbo translation of the Godot Engine editor.
+# Copyright (c) 2007-2022 Juan Linietsky, Ariel Manzur.
+# Copyright (c) 2014-2022 Godot Engine contributors (cf. AUTHORS.md).
+# This file is distributed under the same license as the Godot source code.
+#
+# Chenny <optimusdev12@gmail.com>, 2022.
+msgid ""
+msgstr ""
+"Project-Id-Version: Godot Engine editor\n"
+"Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
+"PO-Revision-Date: 2022-08-07 18:37+0000\n"
+"Last-Translator: Chenny <optimusdev12@gmail.com>\n"
+"Language-Team: Igbo <https://hosted.weblate.org/projects/godot-engine/godot/"
+"ig/>\n"
+"Language: ig\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8-bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Weblate 4.14-dev\n"
+
+#: core/bind/core_bind.cpp main/main.cpp
+msgid "Tablet Driver"
+msgstr "Onye na-anya mbadamba mbadamba"
+
+#: core/bind/core_bind.cpp
+msgid "Clipboard"
+msgstr "Klipbọọdụ"
+
+#: core/bind/core_bind.cpp
+msgid "Current Screen"
+msgstr "Ihuenyo dị ugbu a"
+
+#: core/bind/core_bind.cpp
+msgid "Exit Code"
+msgstr "Koodu ọpụpụ"
+
+#: core/bind/core_bind.cpp
+msgid "V-Sync Enabled"
+msgstr "Agbanyere V-mmekọrịta"
+
+#: core/bind/core_bind.cpp main/main.cpp
+msgid "V-Sync Via Compositor"
+msgstr "V-mmekọrịta Site na ihe mejupụtara"
+
+#: core/bind/core_bind.cpp main/main.cpp
+msgid "Delta Smoothing"
+msgstr "Delta na-ehi ụra"
+
+#: core/bind/core_bind.cpp
+msgid "Low Processor Usage Mode"
+msgstr "Ụdị ojiji Processor dị ala"
+
+#: core/bind/core_bind.cpp
+msgid "Low Processor Usage Mode Sleep (µsec)"
+msgstr "Ụdị ihi ụra dị ala (µ sec)"
+
+#: core/bind/core_bind.cpp main/main.cpp platform/uwp/os_uwp.cpp
+msgid "Keep Screen On"
+msgstr "Debe ihuenyo"
+
+#: core/bind/core_bind.cpp
+msgid "Min Window Size"
+msgstr "Ogo Obere Obere"
+
+#: core/bind/core_bind.cpp
+msgid "Max Window Size"
+msgstr "Oke windo kacha"
+
+#: core/bind/core_bind.cpp
+msgid "Screen Orientation"
+msgstr "Usoro ihuenyo"
+
+#: core/bind/core_bind.cpp core/project_settings.cpp main/main.cpp
+#: platform/uwp/os_uwp.cpp
+msgid "Window"
+msgstr "Ohere"
+
+#: core/bind/core_bind.cpp core/project_settings.cpp
+msgid "Borderless"
+msgstr "Enweghị oke"
+
+#: core/bind/core_bind.cpp
+msgid "Per Pixel Transparency Enabled"
+msgstr "Agbanyere nghọta kwa Pixel"
+
+#: core/bind/core_bind.cpp core/project_settings.cpp
+msgid "Fullscreen"
+msgstr "Ihuenyo zuru oke"
+
+#: core/bind/core_bind.cpp
+msgid "Maximized"
+msgstr "Oke kachasị"
+
+#: core/bind/core_bind.cpp
+msgid "Minimized"
+msgstr "Ebelatala"
+
+#: core/bind/core_bind.cpp core/project_settings.cpp scene/gui/dialogs.cpp
+#: scene/gui/graph_node.cpp
+msgid "Resizable"
+msgstr "Enwere ike ịgbanwe"
+
+#: core/bind/core_bind.cpp core/os/input_event.cpp scene/2d/node_2d.cpp
+#: scene/2d/physics_body_2d.cpp scene/2d/remote_transform_2d.cpp
+#: scene/3d/physics_body.cpp scene/3d/remote_transform.cpp
+#: scene/gui/control.cpp scene/gui/line_edit.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Position"
+msgstr "Ọnọdụ"
+
+#: core/bind/core_bind.cpp core/project_settings.cpp editor/editor_settings.cpp
+#: main/main.cpp modules/gridmap/grid_map.cpp
+#: modules/visual_script/visual_script_nodes.cpp scene/2d/tile_map.cpp
+#: scene/3d/camera.cpp scene/3d/light.cpp scene/gui/control.cpp
+#: scene/gui/graph_edit.cpp scene/main/viewport.cpp
+#: scene/resources/dynamic_font.cpp scene/resources/navigation_mesh.cpp
+#: scene/resources/primitive_meshes.cpp scene/resources/sky.cpp
+#: scene/resources/style_box.cpp scene/resources/texture.cpp
+#: scene/resources/visual_shader.cpp servers/visual_server.cpp
+msgid "Size"
+msgstr "Nha"
+
+#: core/bind/core_bind.cpp
+msgid "Endian Swap"
+msgstr "Endian gbanwere"
+
+#: core/bind/core_bind.cpp
+msgid "Editor Hint"
+msgstr "Ntuziaka nchịkọta akụkọ"
+
+#: core/bind/core_bind.cpp
+msgid "Print Error Messages"
+msgstr "Bipụta ozi mperi"
+
+#: core/bind/core_bind.cpp
+msgid "Iterations Per Second"
+msgstr "Nkwagharị kwa nkeji"
+
+#: core/bind/core_bind.cpp
+msgid "Target FPS"
+msgstr "Ebumnuche FPS"
+
+#: core/bind/core_bind.cpp
+msgid "Time Scale"
+msgstr "Ogologo oge"
+
+#: core/bind/core_bind.cpp main/main.cpp
+msgid "Physics Jitter Fix"
+msgstr ""
+
+#: core/bind/core_bind.cpp editor/plugins/version_control_editor_plugin.cpp
+msgid "Error"
+msgstr "Njehie"
+
+#: core/bind/core_bind.cpp
+msgid "Error String"
+msgstr "Eriri mperi"
+
+#: core/bind/core_bind.cpp
+msgid "Error Line"
+msgstr "Ahịrị mperi"
+
+#: core/bind/core_bind.cpp
+msgid "Result"
+msgstr "Nsonaazụ"
+
+#: core/command_queue_mt.cpp core/message_queue.cpp main/main.cpp
+msgid "Memory"
+msgstr "Ebe nchekwa"
+
+#: core/command_queue_mt.cpp core/message_queue.cpp
+#: core/register_core_types.cpp drivers/gles2/rasterizer_canvas_base_gles2.cpp
+#: drivers/gles2/rasterizer_scene_gles2.cpp
+#: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+#: drivers/gles3/rasterizer_storage_gles3.cpp main/main.cpp
+#: modules/webrtc/webrtc_data_channel.h modules/websocket/websocket_macros.h
+#: servers/visual_server.cpp
+msgid "Limits"
+msgstr "Oke"
+
+#: core/command_queue_mt.cpp
+msgid "Command Queue"
+msgstr "Queue iwu"
+
+#: core/command_queue_mt.cpp
+msgid "Multithreading Queue Size (KB)"
+msgstr "Ogo Queue Multithreading (KB)"
+
+#: core/func_ref.cpp modules/visual_script/visual_script_builtin_funcs.cpp
+#: modules/visual_script/visual_script_func_nodes.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Function"
+msgstr "Ọrụ"
+
+#: core/image.cpp core/packed_data_container.cpp scene/2d/polygon_2d.cpp
+#: scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
+msgid "Data"
+msgstr "Data"
+
+#: core/io/file_access_network.cpp core/register_core_types.cpp
+#: editor/editor_file_dialog.cpp editor/editor_settings.cpp main/main.cpp
+#: modules/gdscript/language_server/gdscript_language_server.cpp
+#: modules/webrtc/webrtc_data_channel.h modules/websocket/websocket_macros.h
+#: scene/gui/file_dialog.cpp
+msgid "Network"
+msgstr "Netwọk"
+
+#: core/io/file_access_network.cpp
+msgid "Remote FS"
+msgstr "FS dịpụrụ adịpụ"
+
+#: core/io/file_access_network.cpp
+msgid "Page Size"
+msgstr "Nha ibe"
+
+#: core/io/file_access_network.cpp
+msgid "Page Read Ahead"
+msgstr "Ibe Gụọ n'ihu"
+
+#: core/io/http_client.cpp
+msgid "Blocking Mode Enabled"
+msgstr "Agbanyere ọnọdụ mgbochi"
+
+#: core/io/http_client.cpp
+msgid "Connection"
+msgstr "Njikọ"
+
+#: core/io/http_client.cpp
+msgid "Read Chunk Size"
+msgstr "Gụọ nha nha"
+
+#: core/io/marshalls.cpp
+msgid "Object ID"
+msgstr "NJ ihe"
+
+#: core/io/multiplayer_api.cpp core/io/packet_peer.cpp
+msgid "Allow Object Decoding"
+msgstr "Kwe ka Nhazi ihe"
+
+#: core/io/multiplayer_api.cpp scene/main/scene_tree.cpp
+msgid "Refuse New Network Connections"
+msgstr "Jụ njikọ netwọkụ ọhụrụ"
+
+#: core/io/multiplayer_api.cpp scene/main/scene_tree.cpp
+msgid "Network Peer"
+msgstr "Ndị ọgbọ netwọk"
+
+#: core/io/multiplayer_api.cpp scene/animation/animation_player.cpp
+msgid "Root Node"
+msgstr "Mgbọrọgwụ Node"
+
+#: core/io/networked_multiplayer_peer.cpp
+msgid "Refuse New Connections"
+msgstr "Jụ njikọ ọhụrụ"
+
+#: core/io/networked_multiplayer_peer.cpp
+msgid "Transfer Mode"
+msgstr "Ụdị nnyefe"
+
+#: core/io/packet_peer.cpp
+msgid "Encode Buffer Max Size"
+msgstr "Gbanye ihe nchekwa oke nha"
+
+#: core/io/packet_peer.cpp
+msgid "Input Buffer Max Size"
+msgstr "Ntinye ihe nchekwa oke oke"
+
+#: core/io/packet_peer.cpp
+msgid "Output Buffer Max Size"
+msgstr ""
+
+#: core/io/packet_peer.cpp
+msgid "Stream Peer"
+msgstr ""
+
+#: core/io/stream_peer.cpp
+msgid "Big Endian"
+msgstr ""
+
+#: core/io/stream_peer.cpp
+msgid "Data Array"
+msgstr ""
+
+#: core/io/stream_peer_ssl.cpp
+msgid "Blocking Handshake"
+msgstr ""
+
+#: core/io/udp_server.cpp
+msgid "Max Pending Connections"
+msgstr ""
+
+#: core/math/expression.cpp modules/gdscript/gdscript_functions.cpp
+#: modules/visual_script/visual_script_builtin_funcs.cpp
+msgid "Invalid type argument to convert(), use TYPE_* constants."
+msgstr ""
+
+#: core/math/expression.cpp modules/gdscript/gdscript_functions.cpp
+msgid "Expected a string of length 1 (a character)."
+msgstr ""
+
+#: core/math/expression.cpp modules/gdscript/gdscript_functions.cpp
+#: modules/mono/glue/gd_glue.cpp
+#: modules/visual_script/visual_script_builtin_funcs.cpp
+msgid "Not enough bytes for decoding bytes, or invalid format."
+msgstr ""
+
+#: core/math/expression.cpp
+msgid "Invalid input %d (not passed) in expression"
+msgstr ""
+
+#: core/math/expression.cpp
+msgid "self can't be used because instance is null (not passed)"
+msgstr ""
+
+#: core/math/expression.cpp
+msgid "Invalid operands to operator %s, %s and %s."
+msgstr ""
+
+#: core/math/expression.cpp
+msgid "Invalid index of type %s for base type %s"
+msgstr ""
+
+#: core/math/expression.cpp
+msgid "Invalid named index '%s' for base type %s"
+msgstr ""
+
+#: core/math/expression.cpp
+msgid "Invalid arguments to construct '%s'"
+msgstr ""
+
+#: core/math/expression.cpp
+msgid "On call to '%s':"
+msgstr ""
+
+#: core/math/random_number_generator.cpp
+#: modules/opensimplex/open_simplex_noise.cpp
+msgid "Seed"
+msgstr ""
+
+#: core/math/random_number_generator.cpp
+msgid "State"
+msgstr ""
+
+#: core/message_queue.cpp
+msgid "Message Queue"
+msgstr ""
+
+#: core/message_queue.cpp
+msgid "Max Size (KB)"
+msgstr ""
+
+#: core/os/input.cpp
+msgid "Mouse Mode"
+msgstr ""
+
+#: core/os/input.cpp
+msgid "Use Accumulated Input"
+msgstr ""
+
+#: core/os/input_event.cpp editor/project_settings_editor.cpp
+#: servers/audio_server.cpp
+msgid "Device"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Alt"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Shift"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Control"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Meta"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Command"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Physical"
+msgstr ""
+
+#: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
+#: scene/gui/base_button.cpp scene/gui/texture_button.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Pressed"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Scancode"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Physical Scancode"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Unicode"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Echo"
+msgstr ""
+
+#: core/os/input_event.cpp scene/gui/base_button.cpp
+msgid "Button Mask"
+msgstr ""
+
+#: core/os/input_event.cpp scene/2d/node_2d.cpp scene/gui/control.cpp
+msgid "Global Position"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Factor"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Button Index"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Doubleclick"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Tilt"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Pressure"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Pen Inverted"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Relative"
+msgstr ""
+
+#: core/os/input_event.cpp scene/2d/camera_2d.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/interpolated_camera.cpp
+#: scene/animation/animation_player.cpp scene/resources/environment.cpp
+#: scene/resources/particles_material.cpp
+msgid "Speed"
+msgstr ""
+
+#: core/os/input_event.cpp editor/project_settings_editor.cpp
+#: scene/3d/sprite_3d.cpp
+msgid "Axis"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Axis Value"
+msgstr ""
+
+#: core/os/input_event.cpp modules/visual_script/visual_script_func_nodes.cpp
+msgid "Index"
+msgstr ""
+
+#: core/os/input_event.cpp editor/project_settings_editor.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+#: scene/2d/touch_screen_button.cpp
+msgid "Action"
+msgstr ""
+
+#: core/os/input_event.cpp scene/resources/environment.cpp
+#: scene/resources/material.cpp
+msgid "Strength"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Delta"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Channel"
+msgstr ""
+
+#: core/os/input_event.cpp main/main.cpp
+msgid "Message"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Pitch"
+msgstr ""
+
+#: core/os/input_event.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/2d/physics_body_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/3d/physics_body.cpp scene/resources/particles_material.cpp
+msgid "Velocity"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Instrument"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Controller Number"
+msgstr ""
+
+#: core/os/input_event.cpp
+msgid "Controller Value"
+msgstr ""
+
+#: core/project_settings.cpp editor/editor_node.cpp main/main.cpp
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+#: platform/windows/export/export.cpp
+msgid "Application"
+msgstr ""
+
+#: core/project_settings.cpp main/main.cpp
+msgid "Config"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Project Settings Override"
+msgstr ""
+
+#: core/project_settings.cpp core/resource.cpp
+#: editor/animation_track_editor.cpp editor/editor_autoload_settings.cpp
+#: editor/editor_help_search.cpp editor/editor_plugin_settings.cpp
+#: editor/editor_profiler.cpp editor/plugins/tile_set_editor_plugin.cpp
+#: editor/project_manager.cpp editor/settings_config_dialog.cpp
+#: modules/gdnative/nativescript/nativescript.cpp
+#: platform/android/export/export_plugin.cpp platform/iphone/export/export.cpp
+#: platform/osx/export/export.cpp scene/2d/area_2d.cpp scene/3d/area.cpp
+#: scene/3d/skeleton.cpp scene/main/node.cpp scene/resources/mesh_library.cpp
+#: scene/resources/skin.cpp
+msgid "Name"
+msgstr ""
+
+#: core/project_settings.cpp editor/editor_help.cpp
+#: modules/visual_script/visual_script_nodes.cpp platform/uwp/export/export.cpp
+#: platform/windows/export/export.cpp
+msgid "Description"
+msgstr ""
+
+#: core/project_settings.cpp editor/editor_node.cpp editor/editor_settings.cpp
+#: editor/plugins/script_editor_plugin.cpp editor/project_manager.cpp
+#: main/main.cpp platform/android/export/export_plugin.cpp
+#: platform/javascript/export/export.cpp
+msgid "Run"
+msgstr ""
+
+#: core/project_settings.cpp editor/editor_node.cpp
+#: editor/run_settings_dialog.cpp main/main.cpp
+msgid "Main Scene"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Disable stdout"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Disable stderr"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Use Hidden Project Data Directory"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Use Custom User Dir"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Custom User Dir Name"
+msgstr ""
+
+#: core/project_settings.cpp main/main.cpp
+#: platform/javascript/export/export.cpp platform/osx/export/export.cpp
+#: platform/uwp/os_uwp.cpp
+msgid "Display"
+msgstr ""
+
+#: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
+#: modules/opensimplex/noise_texture.cpp scene/2d/line_2d.cpp
+#: scene/3d/label_3d.cpp scene/gui/text_edit.cpp scene/resources/texture.cpp
+msgid "Width"
+msgstr ""
+
+#: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
+#: modules/gltf/gltf_node.cpp modules/opensimplex/noise_texture.cpp
+#: scene/2d/light_2d.cpp scene/resources/capsule_shape.cpp
+#: scene/resources/capsule_shape_2d.cpp scene/resources/cylinder_shape.cpp
+#: scene/resources/font.cpp scene/resources/navigation_mesh.cpp
+#: scene/resources/primitive_meshes.cpp scene/resources/texture.cpp
+msgid "Height"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Always On Top"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Test Width"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Test Height"
+msgstr ""
+
+#: core/project_settings.cpp editor/animation_track_editor.cpp
+#: editor/editor_audio_buses.cpp main/main.cpp servers/audio_server.cpp
+msgid "Audio"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Default Bus Layout"
+msgstr ""
+
+#: core/project_settings.cpp editor/editor_export.cpp
+#: editor/editor_file_system.cpp editor/editor_node.cpp
+#: editor/editor_settings.cpp editor/script_create_dialog.cpp
+#: scene/2d/camera_2d.cpp scene/3d/light.cpp scene/main/node.cpp
+msgid "Editor"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Main Run Args"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Scene Naming"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Search In File Extensions"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Script Templates Search Path"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Version Control Autoload On Startup"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Version Control Plugin Name"
+msgstr ""
+
+#: core/project_settings.cpp scene/2d/collision_object_2d.cpp
+#: scene/3d/collision_object.cpp scene/gui/control.cpp
+msgid "Input"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Accept"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Select"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Cancel"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Focus Next"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Focus Prev"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Left"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Right"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Up"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Down"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Page Up"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Page Down"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI Home"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "UI End"
+msgstr ""
+
+#: core/project_settings.cpp main/main.cpp modules/bullet/register_types.cpp
+#: modules/bullet/space_bullet.cpp scene/2d/physics_body_2d.cpp
+#: scene/3d/physics_body.cpp scene/main/scene_tree.cpp scene/main/viewport.cpp
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+#: servers/physics/space_sw.cpp servers/physics_2d/physics_2d_server_sw.cpp
+#: servers/physics_2d/physics_2d_server_wrap_mt.h
+#: servers/physics_2d/space_2d_sw.cpp servers/physics_2d_server.cpp
+#: servers/physics_server.cpp
+msgid "Physics"
+msgstr ""
+
+#: core/project_settings.cpp editor/editor_settings.cpp
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp
+#: editor/plugins/spatial_editor_plugin.cpp main/main.cpp
+#: modules/bullet/register_types.cpp modules/bullet/space_bullet.cpp
+#: scene/3d/physics_body.cpp scene/resources/world.cpp
+#: servers/physics/space_sw.cpp servers/physics_server.cpp
+msgid "3D"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Smooth Trimesh Collision"
+msgstr ""
+
+#: core/project_settings.cpp drivers/gles2/rasterizer_canvas_base_gles2.cpp
+#: drivers/gles2/rasterizer_scene_gles2.cpp
+#: drivers/gles2/rasterizer_storage_gles2.cpp
+#: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+#: drivers/gles3/rasterizer_storage_gles3.cpp main/main.cpp
+#: modules/lightmapper_cpu/register_types.cpp scene/main/scene_tree.cpp
+#: scene/main/viewport.cpp servers/visual/visual_server_scene.cpp
+#: servers/visual_server.cpp
+msgid "Rendering"
+msgstr ""
+
+#: core/project_settings.cpp drivers/gles2/rasterizer_storage_gles2.cpp
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+#: drivers/gles3/rasterizer_storage_gles3.cpp main/main.cpp
+#: modules/lightmapper_cpu/register_types.cpp scene/3d/baked_lightmap.cpp
+#: scene/main/scene_tree.cpp scene/resources/environment.cpp
+#: scene/resources/multimesh.cpp servers/visual/visual_server_scene.cpp
+#: servers/visual_server.cpp
+msgid "Quality"
+msgstr ""
+
+#: core/project_settings.cpp scene/gui/file_dialog.cpp
+#: scene/main/scene_tree.cpp scene/resources/navigation_mesh.cpp
+#: servers/visual_server.cpp
+msgid "Filters"
+msgstr ""
+
+#: core/project_settings.cpp scene/main/viewport.cpp
+msgid "Sharpen Intensity"
+msgstr ""
+
+#: core/project_settings.cpp editor/editor_export.cpp editor/editor_node.cpp
+#: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
+#: editor/project_export.cpp main/main.cpp modules/gdscript/gdscript.cpp
+#: modules/visual_script/visual_script.cpp
+#: platform/android/export/export_plugin.cpp platform/iphone/export/export.cpp
+#: platform/javascript/export/export.cpp platform/osx/export/export.cpp
+#: platform/uwp/export/export.cpp scene/3d/room_manager.cpp
+#: scene/main/scene_tree.cpp scene/resources/shape_2d.cpp
+#: servers/visual_server.cpp
+msgid "Debug"
+msgstr ""
+
+#: core/project_settings.cpp main/main.cpp modules/gdscript/gdscript.cpp
+#: modules/visual_script/visual_script.cpp scene/resources/dynamic_font.cpp
+msgid "Settings"
+msgstr ""
+
+#: core/project_settings.cpp editor/script_editor_debugger.cpp main/main.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
+msgid "Profiler"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Max Functions"
+msgstr ""
+
+#: core/project_settings.cpp scene/3d/vehicle_body.cpp
+msgid "Compression"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Formats"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Zstd"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Long Distance Matching"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Compression Level"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Window Log Size"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Zlib"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Gzip"
+msgstr ""
+
+#: core/project_settings.cpp platform/android/export/export.cpp
+msgid "Android"
+msgstr ""
+
+#: core/project_settings.cpp
+msgid "Modules"
+msgstr ""
+
+#: core/register_core_types.cpp
+msgid "TCP"
+msgstr ""
+
+#: core/register_core_types.cpp
+msgid "Connect Timeout Seconds"
+msgstr ""
+
+#: core/register_core_types.cpp
+msgid "Packet Peer Stream"
+msgstr ""
+
+#: core/register_core_types.cpp
+msgid "Max Buffer (Power of 2)"
+msgstr ""
+
+#: core/register_core_types.cpp editor/editor_settings.cpp main/main.cpp
+msgid "SSL"
+msgstr ""
+
+#: core/register_core_types.cpp main/main.cpp
+msgid "Certificates"
+msgstr ""
+
+#: core/resource.cpp editor/dependency_editor.cpp
+#: editor/editor_resource_picker.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Resource"
+msgstr ""
+
+#: core/resource.cpp
+msgid "Local To Scene"
+msgstr ""
+
+#: core/resource.cpp editor/dependency_editor.cpp
+#: editor/editor_autoload_settings.cpp editor/plugins/path_editor_plugin.cpp
+#: editor/project_manager.cpp editor/project_settings_editor.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Path"
+msgstr ""
+
+#: core/script_language.cpp
+msgid "Source Code"
+msgstr ""
+
+#: core/translation.cpp editor/project_settings_editor.cpp
+msgid "Locale"
+msgstr ""
+
+#: core/translation.cpp
+msgid "Test"
+msgstr ""
+
+#: core/translation.cpp scene/resources/font.cpp
+msgid "Fallback"
+msgstr ""
+
+#: core/ustring.cpp scene/resources/segment_shape_2d.cpp
+msgid "B"
+msgstr ""
+
+#: core/ustring.cpp
+msgid "KiB"
+msgstr ""
+
+#: core/ustring.cpp
+msgid "MiB"
+msgstr ""
+
+#: core/ustring.cpp
+msgid "GiB"
+msgstr ""
+
+#: core/ustring.cpp
+msgid "TiB"
+msgstr ""
+
+#: core/ustring.cpp
+msgid "PiB"
+msgstr ""
+
+#: core/ustring.cpp
+msgid "EiB"
+msgstr ""
+
+#: drivers/gles2/rasterizer_canvas_base_gles2.cpp
+#: drivers/gles2/rasterizer_scene_gles2.cpp
+#: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+#: drivers/gles3/rasterizer_storage_gles3.cpp modules/gltf/gltf_state.cpp
+msgid "Buffers"
+msgstr ""
+
+#: drivers/gles2/rasterizer_canvas_base_gles2.cpp
+#: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+msgid "Canvas Polygon Buffer Size (KB)"
+msgstr ""
+
+#: drivers/gles2/rasterizer_canvas_base_gles2.cpp
+#: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+msgid "Canvas Polygon Index Buffer Size (KB)"
+msgstr ""
+
+#: drivers/gles2/rasterizer_canvas_base_gles2.cpp
+#: drivers/gles3/rasterizer_canvas_base_gles3.cpp editor/editor_settings.cpp
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp main/main.cpp
+#: scene/2d/physics_body_2d.cpp scene/resources/world_2d.cpp
+#: servers/physics_2d/physics_2d_server_sw.cpp
+#: servers/physics_2d/physics_2d_server_wrap_mt.h
+#: servers/physics_2d/space_2d_sw.cpp servers/physics_2d_server.cpp
+#: servers/visual_server.cpp
+msgid "2D"
+msgstr ""
+
+#: drivers/gles2/rasterizer_canvas_base_gles2.cpp
+#: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+msgid "Snapping"
+msgstr ""
+
+#: drivers/gles2/rasterizer_canvas_base_gles2.cpp
+#: drivers/gles3/rasterizer_canvas_base_gles3.cpp
+msgid "Use GPU Pixel Snap"
+msgstr ""
+
+#: drivers/gles2/rasterizer_scene_gles2.cpp
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Immediate Buffer Size (KB)"
+msgstr ""
+
+#: drivers/gles2/rasterizer_storage_gles2.cpp
+#: drivers/gles3/rasterizer_storage_gles3.cpp
+msgid "Lightmapping"
+msgstr ""
+
+#: drivers/gles2/rasterizer_storage_gles2.cpp
+#: drivers/gles3/rasterizer_storage_gles3.cpp
+msgid "Use Bicubic Sampling"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Max Renderable Elements"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Max Renderable Lights"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Max Renderable Reflections"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Max Lights Per Object"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Subsurface Scattering"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp editor/animation_track_editor.cpp
+#: editor/import/resource_importer_texture.cpp
+#: editor/plugins/spatial_editor_plugin.cpp modules/gltf/gltf_node.cpp
+#: modules/gridmap/grid_map.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/2d/node_2d.cpp scene/2d/parallax_layer.cpp scene/2d/polygon_2d.cpp
+#: scene/2d/remote_transform_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/3d/remote_transform.cpp scene/3d/spatial.cpp
+#: scene/animation/animation_blend_tree.cpp scene/gui/control.cpp
+#: scene/main/canvas_layer.cpp scene/resources/environment.cpp
+#: scene/resources/material.cpp scene/resources/particles_material.cpp
+msgid "Scale"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Follow Surface"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Weight Samples"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp
+msgid "Voxel Cone Tracing"
+msgstr ""
+
+#: drivers/gles3/rasterizer_scene_gles3.cpp scene/resources/environment.cpp
+msgid "High Quality"
+msgstr ""
+
+#: drivers/gles3/rasterizer_storage_gles3.cpp
+msgid "Blend Shape Max Buffer Size (KB)"
+msgstr ""
+
+#. TRANSLATORS: Adjective, refers to the mode for Bezier handles (Free, Balanced, Mirror).
+#: editor/animation_bezier_editor.cpp
+msgid "Free"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp
+msgid "Balanced"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp
+msgid "Mirror"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp editor/editor_profiler.cpp
+msgid "Time:"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp editor/animation_track_editor.cpp
+msgid "Value:"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp
+msgid "Insert Key Here"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp
+msgid "Duplicate Selected Key(s)"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp
+msgid "Delete Selected Key(s)"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp
+msgid "Add Bezier Point"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp
+msgid "Move Bezier Points"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp editor/animation_track_editor.cpp
+msgid "Anim Duplicate Keys"
+msgstr ""
+
+#: editor/animation_bezier_editor.cpp editor/animation_track_editor.cpp
+msgid "Anim Delete Keys"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Change Keyframe Time"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Change Transition"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Change Transform"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Change Keyframe Value"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Change Call"
+msgstr ""
+
+#: editor/animation_track_editor.cpp scene/2d/animated_sprite.cpp
+#: scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Frame"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/editor_profiler.cpp
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+#: scene/resources/particles_material.cpp servers/visual_server.cpp
+msgid "Time"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/import/resource_importer_scene.cpp
+#: platform/osx/export/export.cpp
+msgid "Location"
+msgstr ""
+
+#: editor/animation_track_editor.cpp modules/gltf/gltf_node.cpp
+#: scene/2d/polygon_2d.cpp scene/2d/remote_transform_2d.cpp
+#: scene/3d/remote_transform.cpp scene/3d/spatial.cpp scene/gui/control.cpp
+msgid "Rotation"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/script_editor_debugger.cpp
+#: modules/visual_script/visual_script_nodes.cpp scene/gui/range.cpp
+msgid "Value"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Arg Count"
+msgstr ""
+
+#: editor/animation_track_editor.cpp main/main.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
+msgid "Args"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/editor_settings.cpp
+#: editor/script_editor_debugger.cpp modules/gltf/gltf_accessor.cpp
+#: modules/gltf/gltf_light.cpp modules/visual_script/visual_script_nodes.cpp
+#: scene/3d/physics_body.cpp scene/resources/visual_shader_nodes.cpp
+msgid "Type"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "In Handle"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Out Handle"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+#: editor/import/resource_importer_texture.cpp
+#: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
+#: scene/audio/audio_stream_player.cpp scene/gui/video_player.cpp
+msgid "Stream"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Start Offset"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "End Offset"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/editor_settings.cpp
+#: editor/import/resource_importer_scene.cpp
+#: editor/plugins/animation_player_editor_plugin.cpp editor/scene_tree_dock.cpp
+#: scene/2d/animated_sprite.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/2d/sprite.cpp scene/3d/cpu_particles.cpp scene/3d/sprite_3d.cpp
+#: scene/animation/animation_blend_tree.cpp
+#: scene/resources/particles_material.cpp
+msgid "Animation"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Easing"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Multi Change Keyframe Time"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Multi Change Transition"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Multi Change Transform"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Multi Change Keyframe Value"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Multi Change Call"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Change Animation Length"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Change Animation Loop"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Property Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "3D Transform Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Call Method Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Bezier Curve Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Audio Playback Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Animation Playback Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Animation length (frames)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Animation length (seconds)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Add Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Animation Looping"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Functions:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Audio Clips:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Clips:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Change Track Path"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Toggle this track on/off."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Update Mode (How this property is set)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp scene/resources/gradient.cpp
+msgid "Interpolation Mode"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Loop Wrap Mode (Interpolate end with beginning on loop)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Remove this track."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Time (s):"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Position:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Rotation:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Scale:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+#: editor/plugins/theme_editor_plugin.cpp editor/project_settings_editor.cpp
+#: editor/scene_tree_editor.cpp editor/script_editor_debugger.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Type:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "(Invalid, expected type: %s)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Easing:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "In-Handle:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Out-Handle:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Stream:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Start (s):"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "End (s):"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Animation Clip:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Toggle Track Enabled"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Continuous"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Discrete"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Trigger"
+msgstr ""
+
+#: editor/animation_track_editor.cpp scene/3d/baked_lightmap.cpp
+msgid "Capture"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Nearest"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/plugins/curve_editor_plugin.cpp
+#: editor/property_editor.cpp scene/2d/physics_body_2d.cpp
+#: scene/3d/physics_body.cpp
+msgid "Linear"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Cubic"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Clamp Loop Interp"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Wrap Loop Interp"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Insert Key"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Duplicate Key(s)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Add RESET Value(s)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Delete Key(s)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Change Animation Update Mode"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Change Animation Interpolation Mode"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Change Animation Loop Mode"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Remove Anim Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/editor_settings.cpp
+#: editor/plugins/path_editor_plugin.cpp
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+#: editor/plugins/tile_map_editor_plugin.cpp editor/scene_tree_dock.cpp
+#: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Editors"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/editor_settings.cpp
+msgid "Confirm Insert Track"
+msgstr ""
+
+#. TRANSLATORS: %s will be replaced by a phrase describing the target of track.
+#: editor/animation_track_editor.cpp
+msgid "Create NEW track for %s and insert key?"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Create %d NEW tracks and insert keys?"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/create_dialog.cpp
+#: editor/editor_audio_buses.cpp editor/editor_feature_profile.cpp
+#: editor/editor_plugin_settings.cpp editor/plugin_config_dialog.cpp
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+#: editor/plugins/particles_editor_plugin.cpp
+#: editor/plugins/version_control_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+#: editor/script_create_dialog.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Create"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Insert"
+msgstr ""
+
+#. TRANSLATORS: This describes the target of new animation track, will be inserted into another string.
+#: editor/animation_track_editor.cpp
+msgid "node '%s'"
+msgstr ""
+
+#. TRANSLATORS: This describes the target of new animation track, will be inserted into another string.
+#: editor/animation_track_editor.cpp
+msgid "animation"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "AnimationPlayer can't animate itself, only other players."
+msgstr ""
+
+#. TRANSLATORS: This describes the target of new animation track, will be inserted into another string.
+#: editor/animation_track_editor.cpp
+msgid "property '%s'"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Create & Insert"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Insert Track & Key"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Insert Key"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Change Animation Step"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Rearrange Tracks"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Transform tracks only apply to Spatial-based nodes."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid ""
+"Audio tracks can only point to nodes of type:\n"
+"-AudioStreamPlayer\n"
+"-AudioStreamPlayer2D\n"
+"-AudioStreamPlayer3D"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Animation tracks can only point to AnimationPlayer nodes."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Not possible to add a new track without a root"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Invalid track for Bezier (no suitable sub-properties)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Add Bezier Track"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Track path is invalid, so can't add a key."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Track is not of type Spatial, can't insert key"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Add Transform Track Key"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Add Track Key"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Track path is invalid, so can't add a method key."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Add Method Track Key"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Method not found in object:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Move Keys"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/plugins/spatial_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp scene/2d/node_2d.cpp
+#: scene/3d/spatial.cpp scene/main/canvas_layer.cpp
+#: servers/camera/camera_feed.cpp servers/physics_2d_server.cpp
+#: servers/physics_server.cpp
+msgid "Transform"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/editor_help.cpp
+msgid "Methods"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Bezier"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Clipboard is empty!"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Paste Tracks"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Scale Keys"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid ""
+"This option does not work for Bezier editing, as it's only a single track."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim Add RESET Keys"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid ""
+"This animation belongs to an imported scene, so changes to imported tracks "
+"will not be saved.\n"
+"\n"
+"To enable the ability to add custom tracks, navigate to the scene's import "
+"settings and set\n"
+"\"Animation > Storage\" to \"Files\", enable \"Animation > Keep Custom "
+"Tracks\", then re-import.\n"
+"Alternatively, use an import preset that imports animations to separate "
+"files."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Warning: Editing imported animation"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Select an AnimationPlayer node to create and edit animations."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Only show tracks from nodes selected in tree."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Group tracks by node or display them as plain list."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Snap:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Animation step value."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Seconds"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/import/resource_importer_scene.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp main/main.cpp
+#: scene/resources/texture.cpp
+msgid "FPS"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/editor_plugin_settings.cpp
+#: editor/editor_resource_picker.cpp editor/import/resource_importer_wav.cpp
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp
+#: editor/plugins/shader_editor_plugin.cpp editor/plugins/text_editor.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp editor/project_manager.cpp
+#: editor/project_settings_editor.cpp editor/property_editor.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Edit"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Animation properties."
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Copy Tracks"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Scale Selection"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Scale From Cursor"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/plugins/script_text_editor.cpp
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Duplicate Selection"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Duplicate Transposed"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Delete Selection"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Go to Next Step"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Go to Previous Step"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Apply Reset"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Optimize Animation"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Clean-Up Animation"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Pick the node that will be animated:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Use Bezier Curves"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Create RESET Track(s)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Anim. Optimizer"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Max. Linear Error:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Max. Angular Error:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Max Optimizable Angle:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp scene/3d/room_manager.cpp
+#: servers/visual_server.cpp
+msgid "Optimize"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Remove invalid keys"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Remove unresolved and empty tracks"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Clean-up all animations"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Clean-Up Animation(s) (NO UNDO!)"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Clean-Up"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Scale Ratio:"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Select Tracks to Copy"
+msgstr ""
+
+#: editor/animation_track_editor.cpp editor/editor_log.cpp
+#: editor/editor_resource_picker.cpp
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp editor/property_editor.cpp
+#: editor/scene_tree_dock.cpp scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Copy"
+msgstr ""
+
+#: editor/animation_track_editor.cpp
+msgid "Select All/None"
+msgstr ""
+
+#: editor/animation_track_editor_plugins.cpp
+msgid "Add Audio Track Clip"
+msgstr ""
+
+#: editor/animation_track_editor_plugins.cpp
+msgid "Change Audio Track Clip Start Offset"
+msgstr ""
+
+#: editor/animation_track_editor_plugins.cpp
+msgid "Change Audio Track Clip End Offset"
+msgstr ""
+
+#: editor/array_property_edit.cpp
+msgid "Resize Array"
+msgstr ""
+
+#: editor/array_property_edit.cpp
+msgid "Change Array Value Type"
+msgstr ""
+
+#: editor/array_property_edit.cpp
+msgid "Change Array Value"
+msgstr ""
+
+#: editor/code_editor.cpp
+msgid "Go to Line"
+msgstr ""
+
+#: editor/code_editor.cpp
+msgid "Line Number:"
+msgstr ""
+
+#: editor/code_editor.cpp
+msgid "%d replaced."
+msgstr ""
+
+#: editor/code_editor.cpp editor/editor_help.cpp
+msgid "%d match."
+msgstr ""
+
+#: editor/code_editor.cpp editor/editor_help.cpp
+msgid "%d matches."
+msgstr ""
+
+#: editor/code_editor.cpp editor/find_in_files.cpp
+msgid "Match Case"
+msgstr ""
+
+#: editor/code_editor.cpp editor/find_in_files.cpp
+msgid "Whole Words"
+msgstr ""
+
+#: editor/code_editor.cpp
+msgid "Replace"
+msgstr ""
+
+#: editor/code_editor.cpp
+msgid "Replace All"
+msgstr ""
+
+#: editor/code_editor.cpp
+msgid "Selection Only"
+msgstr ""
+
+#: editor/code_editor.cpp editor/plugins/script_text_editor.cpp
+#: editor/plugins/text_editor.cpp
+msgid "Standard"
+msgstr ""
+
+#: editor/code_editor.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Toggle Scripts Panel"
+msgstr ""
+
+#: editor/code_editor.cpp editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+#: editor/plugins/texture_region_editor_plugin.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp scene/gui/graph_edit.cpp
+msgid "Zoom In"
+msgstr ""
+
+#: editor/code_editor.cpp editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+#: editor/plugins/texture_region_editor_plugin.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp scene/gui/graph_edit.cpp
+msgid "Zoom Out"
+msgstr ""
+
+#: editor/code_editor.cpp
+msgid "Reset Zoom"
+msgstr ""
+
+#: editor/code_editor.cpp modules/gdscript/gdscript.cpp
+msgid "Warnings"
+msgstr ""
+
+#: editor/code_editor.cpp
+msgid "Line and column numbers."
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Method in target node must be specified."
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Method name must be a valid identifier."
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid ""
+"Target method not found. Specify a valid method or attach a script to the "
+"target node."
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Connect to Node:"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Connect to Script:"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "From Signal:"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Scene does not contain any script."
+msgstr ""
+
+#: editor/connections_dialog.cpp editor/editor_autoload_settings.cpp
+#: editor/groups_editor.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+#: editor/plugins/item_list_editor_plugin.cpp
+#: editor/plugins/theme_editor_plugin.cpp editor/project_settings_editor.cpp
+msgid "Add"
+msgstr ""
+
+#: editor/connections_dialog.cpp editor/dependency_editor.cpp
+#: editor/groups_editor.cpp editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+#: editor/plugins/version_control_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp editor/project_manager.cpp
+#: editor/project_settings_editor.cpp
+msgid "Remove"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Add Extra Call Argument:"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Extra Call Arguments:"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Receiver Method:"
+msgstr ""
+
+#: editor/connections_dialog.cpp scene/3d/room_manager.cpp
+#: servers/visual_server.cpp
+msgid "Advanced"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Deferred"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid ""
+"Defers the signal, storing it in a queue and only firing it at idle time."
+msgstr ""
+
+#: editor/connections_dialog.cpp scene/resources/texture.cpp
+msgid "Oneshot"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Disconnects the signal after its first emission."
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Cannot connect signal"
+msgstr ""
+
+#: editor/connections_dialog.cpp editor/dependency_editor.cpp
+#: editor/export_template_manager.cpp editor/groups_editor.cpp
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/asset_library_editor_plugin.cpp
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+#: editor/plugins/theme_editor_plugin.cpp editor/project_export.cpp
+#: editor/project_settings_editor.cpp editor/property_editor.cpp
+#: editor/run_settings_dialog.cpp editor/settings_config_dialog.cpp
+#: modules/visual_script/visual_script_editor.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Close"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Connect"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Signal:"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Connect '%s' to '%s'"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Disconnect '%s' from '%s'"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Disconnect all from signal: '%s'"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Connect..."
+msgstr ""
+
+#: editor/connections_dialog.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Disconnect"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Connect a Signal to a Method"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Edit Connection:"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Are you sure you want to remove all connections from the \"%s\" signal?"
+msgstr ""
+
+#: editor/connections_dialog.cpp editor/editor_help.cpp editor/node_dock.cpp
+msgid "Signals"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Filter signals"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Are you sure you want to remove all connections from this signal?"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Disconnect All"
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Edit..."
+msgstr ""
+
+#: editor/connections_dialog.cpp
+msgid "Go to Method"
+msgstr ""
+
+#: editor/create_dialog.cpp
+msgid "Change %s Type"
+msgstr ""
+
+#: editor/create_dialog.cpp editor/project_settings_editor.cpp
+msgid "Change"
+msgstr ""
+
+#: editor/create_dialog.cpp
+msgid "Create New %s"
+msgstr ""
+
+#: editor/create_dialog.cpp editor/plugins/asset_library_editor_plugin.cpp
+msgid "No results for \"%s\"."
+msgstr ""
+
+#: editor/create_dialog.cpp editor/property_selector.cpp
+msgid "No description available for %s."
+msgstr ""
+
+#: editor/create_dialog.cpp editor/editor_file_dialog.cpp
+#: editor/filesystem_dock.cpp
+msgid "Favorites:"
+msgstr ""
+
+#: editor/create_dialog.cpp editor/editor_file_dialog.cpp
+msgid "Recent:"
+msgstr ""
+
+#: editor/create_dialog.cpp editor/editor_quick_open.cpp
+#: editor/plugins/script_editor_plugin.cpp editor/property_selector.cpp
+#: editor/rename_dialog.cpp
+#: modules/visual_script/visual_script_property_selector.cpp
+msgid "Search:"
+msgstr ""
+
+#: editor/create_dialog.cpp editor/editor_quick_open.cpp
+#: editor/plugins/script_editor_plugin.cpp editor/property_selector.cpp
+#: modules/visual_script/visual_script_property_selector.cpp
+msgid "Matches:"
+msgstr ""
+
+#: editor/create_dialog.cpp editor/editor_feature_profile.cpp
+#: editor/editor_plugin_settings.cpp editor/plugin_config_dialog.cpp
+#: editor/plugins/asset_library_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp editor/property_selector.cpp
+#: modules/visual_script/visual_script_property_selector.cpp
+msgid "Description:"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Search Replacement For:"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Dependencies For:"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid ""
+"Scene '%s' is currently being edited.\n"
+"Changes will only take effect when reloaded."
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid ""
+"Resource '%s' is in use.\n"
+"Changes will only take effect when reloaded."
+msgstr ""
+
+#: editor/dependency_editor.cpp
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Dependencies"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Dependencies:"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Fix Broken"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Dependency Editor"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Search Replacement Resource:"
+msgstr ""
+
+#: editor/dependency_editor.cpp editor/editor_file_dialog.cpp
+#: editor/editor_help_search.cpp editor/editor_node.cpp
+#: editor/editor_quick_open.cpp editor/filesystem_dock.cpp
+#: editor/plugins/script_editor_plugin.cpp editor/property_selector.cpp
+#: editor/script_create_dialog.cpp
+#: modules/visual_script/visual_script_property_selector.cpp
+#: scene/gui/file_dialog.cpp
+msgid "Open"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Owners of: %s (Total: %d)"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid ""
+"Remove the selected files from the project? (Cannot be undone.)\n"
+"Depending on your filesystem configuration, the files will either be moved "
+"to the system trash or deleted permanently."
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid ""
+"The files being removed are required by other resources in order for them to "
+"work.\n"
+"Remove them anyway? (Cannot be undone.)\n"
+"Depending on your filesystem configuration, the files will either be moved "
+"to the system trash or deleted permanently."
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Cannot remove:"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Error loading:"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Load failed due to missing dependencies:"
+msgstr ""
+
+#: editor/dependency_editor.cpp editor/editor_node.cpp
+msgid "Open Anyway"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Which action should be taken?"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Fix Dependencies"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Errors loading!"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Permanently delete %d item(s)? (No undo!)"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Show Dependencies"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Orphan Resource Explorer"
+msgstr ""
+
+#: editor/dependency_editor.cpp editor/editor_audio_buses.cpp
+#: editor/editor_file_dialog.cpp editor/editor_node.cpp
+#: editor/filesystem_dock.cpp editor/plugins/item_list_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp editor/project_export.cpp
+#: editor/project_settings_editor.cpp editor/scene_tree_dock.cpp
+msgid "Delete"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Owns"
+msgstr ""
+
+#: editor/dependency_editor.cpp
+msgid "Resources Without Explicit Ownership:"
+msgstr ""
+
+#: editor/dictionary_property_edit.cpp
+msgid "Change Dictionary Key"
+msgstr ""
+
+#: editor/dictionary_property_edit.cpp
+msgid "Change Dictionary Value"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Thanks from the Godot community!"
+msgstr ""
+
+#: editor/editor_about.cpp editor/editor_node.cpp editor/project_manager.cpp
+msgid "Click to copy."
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Godot Engine contributors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Project Founders"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Lead Developer"
+msgstr ""
+
+#. TRANSLATORS: This refers to a job title.
+#: editor/editor_about.cpp
+msgctxt "Job Title"
+msgid "Project Manager"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Developers"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Authors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Platinum Sponsors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Gold Sponsors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Silver Sponsors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Bronze Sponsors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Mini Sponsors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Gold Donors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Silver Donors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Bronze Donors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Donors"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "License"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Third-party Licenses"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid ""
+"Godot Engine relies on a number of third-party free and open source "
+"libraries, all compatible with the terms of its MIT license. The following "
+"is an exhaustive list of all such third-party components with their "
+"respective copyright statements and license terms."
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "All Components"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Components"
+msgstr ""
+
+#: editor/editor_about.cpp
+msgid "Licenses"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "Error opening asset file for \"%s\" (not in ZIP format)."
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "%s (already exists)"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "Contents of asset \"%s\" - %d file(s) conflict with your project:"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "Contents of asset \"%s\" - No files conflict with your project:"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "Uncompressing Assets"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "The following files failed extraction from asset \"%s\":"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "(and %s more files)"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "Asset \"%s\" installed successfully!"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Success!"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp editor/editor_node.cpp
+msgid "Install"
+msgstr ""
+
+#: editor/editor_asset_installer.cpp
+msgid "Asset Installer"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Speakers"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Add Effect"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Rename Audio Bus"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Change Audio Bus Volume"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Toggle Audio Bus Solo"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Toggle Audio Bus Mute"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Toggle Audio Bus Bypass Effects"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Select Audio Bus Send"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Add Audio Bus Effect"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Move Bus Effect"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Delete Bus Effect"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Drag & drop to rearrange."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Solo"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Mute"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Bypass"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Bus Options"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp editor/filesystem_dock.cpp
+#: editor/project_export.cpp editor/scene_tree_dock.cpp
+msgid "Duplicate"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Reset Volume"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Delete Effect"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Add Audio Bus"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Master bus can't be deleted!"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Delete Audio Bus"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Duplicate Audio Bus"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Reset Bus Volume"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Move Audio Bus"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Save Audio Bus Layout As..."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Location for New Layout..."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Open Audio Bus Layout"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "There is no '%s' file."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Layout:"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Invalid file, not an audio bus layout."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Error saving file: %s"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Add Bus"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Add a new Audio Bus to this layout."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp editor/editor_resource_picker.cpp
+#: editor/plugins/animation_player_editor_plugin.cpp editor/property_editor.cpp
+#: editor/script_create_dialog.cpp
+msgid "Load"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Load an existing Bus Layout."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Save As"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Save this Bus Layout to a file."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp editor/import_dock.cpp
+msgid "Load Default"
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Load the default Bus Layout."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Create a new Bus Layout."
+msgstr ""
+
+#: editor/editor_audio_buses.cpp
+msgid "Audio Bus Layout"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Invalid name."
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Cannot begin with a digit."
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Valid characters:"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Must not collide with an existing engine class name."
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Must not collide with an existing built-in type name."
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Must not collide with an existing global constant name."
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Keyword cannot be used as an autoload name."
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Autoload '%s' already exists!"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Rename Autoload"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Toggle AutoLoad Globals"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Move Autoload"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Remove Autoload"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp editor/editor_plugin_settings.cpp
+#: modules/gdscript/gdscript.cpp platform/android/export/export_plugin.cpp
+#: platform/osx/export/export.cpp platform/windows/export/export.cpp
+#: scene/2d/polygon_2d.cpp scene/3d/area.cpp scene/3d/physics_joint.cpp
+#: scene/3d/reflection_probe.cpp scene/main/canvas_layer.cpp
+#: scene/resources/material.cpp servers/visual_server.cpp
+msgid "Enable"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Rearrange Autoloads"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Can't add autoload:"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "%s is an invalid path. File does not exist."
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "%s is an invalid path. Not in resource path (res://)."
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Add AutoLoad"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp editor/editor_file_dialog.cpp
+#: editor/editor_plugin_settings.cpp
+#: editor/plugins/animation_tree_editor_plugin.cpp
+#: editor/script_create_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Path:"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Node Name:"
+msgstr ""
+
+#: editor/editor_autoload_settings.cpp
+msgid "Global Variable"
+msgstr ""
+
+#: editor/editor_data.cpp
+msgid "Paste Params"
+msgstr ""
+
+#: editor/editor_data.cpp
+msgid "Updating Scene"
+msgstr ""
+
+#: editor/editor_data.cpp
+msgid "Storing local changes..."
+msgstr ""
+
+#: editor/editor_data.cpp
+msgid "Updating scene..."
+msgstr ""
+
+#: editor/editor_data.cpp editor/editor_resource_picker.cpp
+msgid "[empty]"
+msgstr ""
+
+#: editor/editor_data.cpp editor/plugins/script_text_editor.cpp
+#: editor/plugins/text_editor.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "[unsaved]"
+msgstr ""
+
+#: editor/editor_dir_dialog.cpp
+msgid "Please select a base directory first."
+msgstr ""
+
+#: editor/editor_dir_dialog.cpp
+msgid "Choose a Directory"
+msgstr ""
+
+#: editor/editor_dir_dialog.cpp editor/editor_file_dialog.cpp
+#: editor/filesystem_dock.cpp editor/project_manager.cpp
+#: scene/gui/file_dialog.cpp
+msgid "Create Folder"
+msgstr ""
+
+#: editor/editor_dir_dialog.cpp editor/editor_file_dialog.cpp
+#: editor/editor_plugin_settings.cpp editor/filesystem_dock.cpp
+#: editor/plugins/theme_editor_plugin.cpp editor/project_export.cpp
+#: editor/script_create_dialog.cpp
+#: modules/visual_script/visual_script_editor.cpp scene/gui/file_dialog.cpp
+msgid "Name:"
+msgstr ""
+
+#: editor/editor_dir_dialog.cpp editor/editor_file_dialog.cpp
+#: editor/filesystem_dock.cpp scene/gui/file_dialog.cpp
+msgid "Could not create folder."
+msgstr ""
+
+#: editor/editor_dir_dialog.cpp
+msgid "Choose"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Project export for platform:"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Completed with warnings."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Completed successfully."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Failed."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Storing File:"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "No export template found at the expected path:"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Packing"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Save PCK"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Cannot create file \"%s\"."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Failed to export project files."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Can't open file to read from path \"%s\"."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Save ZIP"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid ""
+"Target platform requires 'ETC' texture compression for GLES2. Enable 'Import "
+"Etc' in Project Settings."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid ""
+"Target platform requires 'ETC2' texture compression for GLES3. Enable "
+"'Import Etc 2' in Project Settings."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid ""
+"Target platform requires 'ETC' texture compression for the driver fallback "
+"to GLES2.\n"
+"Enable 'Import Etc' in Project Settings, or disable 'Driver Fallback "
+"Enabled'."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid ""
+"Target platform requires 'PVRTC' texture compression for GLES2. Enable "
+"'Import Pvrtc' in Project Settings."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid ""
+"Target platform requires 'ETC2' or 'PVRTC' texture compression for GLES3. "
+"Enable 'Import Etc 2' or 'Import Pvrtc' in Project Settings."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid ""
+"Target platform requires 'PVRTC' texture compression for the driver fallback "
+"to GLES2.\n"
+"Enable 'Import Pvrtc' in Project Settings, or disable 'Driver Fallback "
+"Enabled'."
+msgstr ""
+
+#: editor/editor_export.cpp platform/android/export/export_plugin.cpp
+#: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
+#: platform/osx/export/export.cpp platform/uwp/export/export.cpp
+msgid "Custom Template"
+msgstr ""
+
+#: editor/editor_export.cpp editor/project_export.cpp
+#: platform/android/export/export_plugin.cpp platform/iphone/export/export.cpp
+#: platform/javascript/export/export.cpp platform/osx/export/export.cpp
+#: platform/uwp/export/export.cpp
+msgid "Release"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Binary Format"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "64 Bits"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Embed PCK"
+msgstr ""
+
+#: editor/editor_export.cpp platform/osx/export/export.cpp
+msgid "Texture Format"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "BPTC"
+msgstr ""
+
+#: editor/editor_export.cpp platform/osx/export/export.cpp
+msgid "S3TC"
+msgstr ""
+
+#: editor/editor_export.cpp platform/osx/export/export.cpp
+msgid "ETC"
+msgstr ""
+
+#: editor/editor_export.cpp platform/osx/export/export.cpp
+msgid "ETC2"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "No BPTC Fallbacks"
+msgstr ""
+
+#: editor/editor_export.cpp platform/android/export/export_plugin.cpp
+#: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
+#: platform/osx/export/export.cpp platform/uwp/export/export.cpp
+msgid "Custom debug template not found."
+msgstr ""
+
+#: editor/editor_export.cpp platform/android/export/export_plugin.cpp
+#: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
+#: platform/osx/export/export.cpp platform/uwp/export/export.cpp
+msgid "Custom release template not found."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Prepare Template"
+msgstr ""
+
+#: editor/editor_export.cpp platform/osx/export/export.cpp
+msgid "The given export path doesn't exist."
+msgstr ""
+
+#: editor/editor_export.cpp platform/javascript/export/export.cpp
+msgid "Template file not found: \"%s\"."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Failed to copy export template."
+msgstr ""
+
+#: editor/editor_export.cpp platform/windows/export/export.cpp
+#: platform/x11/export/export.cpp
+msgid "PCK Embedding"
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "On 32-bit exports the embedded PCK cannot be bigger than 4 GiB."
+msgstr ""
+
+#: editor/editor_export.cpp
+msgid "Convert Text Resources To Binary On Export"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "3D Editor"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Script Editor"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+#: editor/plugins/asset_library_editor_plugin.cpp editor/project_manager.cpp
+msgid "Asset Library"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Scene Tree Editing"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Node Dock"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "FileSystem Dock"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Import Dock"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Allows to view and edit 3D scenes."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Allows to edit scripts using the integrated script editor."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Provides built-in access to the Asset Library."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Allows editing the node hierarchy in the Scene dock."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid ""
+"Allows to work with signals and groups of the node selected in the Scene "
+"dock."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Allows to browse the local file system via a dedicated dock."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid ""
+"Allows to configure import settings for individual assets. Requires the "
+"FileSystem dock to function."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "(current)"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "(none)"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Remove currently selected profile, '%s'? Cannot be undone."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Profile must be a valid filename and must not contain '.'"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Profile with this name already exists."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "(Editor Disabled, Properties Disabled)"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "(Properties Disabled)"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "(Editor Disabled)"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Class Options:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Enable Contextual Editor"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Class Properties:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Main Features:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Nodes and Classes:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "File '%s' format is invalid, import aborted."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid ""
+"Profile '%s' already exists. Remove it first before importing, import "
+"aborted."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Error saving profile to path: '%s'."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Reset to Default"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Current Profile:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Create Profile"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Remove Profile"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Available Profiles:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Make Current"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp editor/editor_node.cpp
+#: editor/import/resource_importer_scene.cpp
+#: editor/plugins/theme_editor_plugin.cpp editor/project_manager.cpp
+#: modules/fbx/editor_scene_importer_fbx.cpp
+msgid "Import"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp editor/project_export.cpp
+#: platform/android/export/export.cpp platform/android/export/export_plugin.cpp
+#: platform/javascript/export/export.cpp platform/osx/export/export.cpp
+#: platform/uwp/export/export.cpp platform/windows/export/export.cpp
+msgid "Export"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Configure Selected Profile:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Extra Options:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Create or import a profile to edit available classes and properties."
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "New profile name:"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Godot Feature Profile"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Import Profile(s)"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Export Profile"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Manage Editor Feature Profiles"
+msgstr ""
+
+#: editor/editor_feature_profile.cpp
+msgid "Default Feature Profile"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Select Current Folder"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "File exists, overwrite?"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Select This Folder"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
+msgid "Copy Path"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
+msgid "Open in File Manager"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/editor_node.cpp
+#: editor/filesystem_dock.cpp editor/project_manager.cpp
+msgid "Show in File Manager"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
+msgid "New Folder..."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/find_in_files.cpp
+msgid "Refresh"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "All Recognized"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "All Files (*)"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Open a File"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Open File(s)"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Open a Directory"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Open a File or Directory"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/editor_node.cpp
+#: editor/editor_resource_picker.cpp editor/import_defaults_editor.cpp
+#: editor/inspector_dock.cpp editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/theme_editor_plugin.cpp scene/gui/file_dialog.cpp
+msgid "Save"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Save a File"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Access"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/editor_settings.cpp
+msgid "Display Mode"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp
+#: editor/import/resource_importer_wav.cpp main/main.cpp
+#: modules/csg/csg_shape.cpp modules/visual_script/visual_script_nodes.cpp
+#: scene/2d/light_2d.cpp scene/2d/physics_body_2d.cpp scene/2d/tile_map.cpp
+#: scene/3d/baked_lightmap.cpp scene/3d/light.cpp scene/3d/physics_body.cpp
+#: scene/gui/control.cpp scene/gui/file_dialog.cpp
+#: scene/resources/environment.cpp scene/resources/material.cpp
+#: scene/resources/visual_shader.cpp
+#: servers/audio/effects/audio_effect_distortion.cpp
+msgid "Mode"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Current Dir"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Current File"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Current Path"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/editor_settings.cpp
+#: scene/gui/file_dialog.cpp
+msgid "Show Hidden Files"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Disable Overwrite Warning"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Go Back"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Go Forward"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Go Up"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Toggle Hidden Files"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Toggle Favorite"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/editor_resource_picker.cpp
+#: scene/gui/base_button.cpp
+msgid "Toggle Mode"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Focus Path"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Move Favorite Up"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Move Favorite Down"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Go to previous folder."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "Go to next folder."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Go to parent folder."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Refresh files."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+msgid "(Un)favorite current folder."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Toggle the visibility of hidden files."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
+msgid "View items as a grid of thumbnails."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/filesystem_dock.cpp
+msgid "View items as a list."
+msgstr ""
+
+#: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
+msgid "Directories & Files:"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp editor/plugins/sprite_editor_plugin.cpp
+#: editor/plugins/style_box_editor_plugin.cpp editor/rename_dialog.cpp
+msgid "Preview:"
+msgstr ""
+
+#: editor/editor_file_dialog.cpp
+#: editor/plugins/version_control_editor_plugin.cpp scene/gui/file_dialog.cpp
+msgid "File:"
+msgstr ""
+
+#: editor/editor_file_system.cpp
+msgid "ScanSources"
+msgstr ""
+
+#: editor/editor_file_system.cpp
+msgid ""
+"There are multiple importers for different types pointing to file %s, import "
+"aborted"
+msgstr ""
+
+#: editor/editor_file_system.cpp
+msgid "(Re)Importing Assets"
+msgstr ""
+
+#: editor/editor_file_system.cpp
+msgid "Reimport Missing Imported Files"
+msgstr ""
+
+#: editor/editor_help.cpp scene/2d/camera_2d.cpp scene/gui/control.cpp
+#: scene/gui/nine_patch_rect.cpp scene/resources/dynamic_font.cpp
+#: scene/resources/style_box.cpp scene/resources/texture.cpp
+msgid "Top"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Class:"
+msgstr ""
+
+#: editor/editor_help.cpp editor/scene_tree_editor.cpp
+#: editor/script_create_dialog.cpp
+msgid "Inherits:"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Inherited by:"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Online Tutorials"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Properties"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "overrides %s:"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "default:"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Theme Properties"
+msgstr ""
+
+#: editor/editor_help.cpp editor/plugins/theme_editor_plugin.cpp
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/gradient.cpp
+msgid "Colors"
+msgstr ""
+
+#: editor/editor_help.cpp editor/plugins/theme_editor_plugin.cpp
+msgid "Constants"
+msgstr ""
+
+#: editor/editor_help.cpp editor/plugins/theme_editor_plugin.cpp
+msgid "Fonts"
+msgstr ""
+
+#: editor/editor_help.cpp editor/plugins/theme_editor_plugin.cpp
+#: platform/iphone/export/export.cpp
+msgid "Icons"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Styles"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Enumerations"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Property Descriptions"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "(value)"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid ""
+"There is currently no description for this property. Please help us by "
+"[color=$color][url=$url]contributing one[/url][/color]!"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Method Descriptions"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid ""
+"There is currently no description for this method. Please help us by "
+"[color=$color][url=$url]contributing one[/url][/color]!"
+msgstr ""
+
+#: editor/editor_help.cpp editor/editor_settings.cpp
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp
+#: modules/gdscript/editor/gdscript_highlighter.cpp
+#: modules/gdscript/gdscript_editor.cpp
+msgid "Text Editor"
+msgstr ""
+
+#: editor/editor_help.cpp editor/editor_node.cpp editor/editor_settings.cpp
+#: editor/plugins/shader_editor_plugin.cpp
+msgid "Help"
+msgstr ""
+
+#: editor/editor_help.cpp
+msgid "Sort Functions Alphabetically"
+msgstr ""
+
+#: editor/editor_help_search.cpp editor/editor_node.cpp
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Search Help"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Case Sensitive"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Show Hierarchy"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Display All"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Classes Only"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Methods Only"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Signals Only"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Constants Only"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Properties Only"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Theme Properties Only"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Member Type"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Class"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Method"
+msgstr ""
+
+#: editor/editor_help_search.cpp editor/plugins/script_text_editor.cpp
+#: modules/visual_script/visual_script_func_nodes.cpp
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "Signal"
+msgstr ""
+
+#: editor/editor_help_search.cpp modules/visual_script/visual_script_nodes.cpp
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Constant"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Property"
+msgstr ""
+
+#: editor/editor_help_search.cpp
+msgid "Theme Property"
+msgstr ""
+
+#: editor/editor_inspector.cpp editor/project_settings_editor.cpp
+msgid "Property:"
+msgstr ""
+
+#: editor/editor_inspector.cpp editor/editor_spin_slider.cpp
+msgid "Label"
+msgstr ""
+
+#: editor/editor_inspector.cpp editor/editor_spin_slider.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Read Only"
+msgstr ""
+
+#: editor/editor_inspector.cpp editor/plugins/item_list_editor_plugin.cpp
+msgid "Checkable"
+msgstr ""
+
+#: editor/editor_inspector.cpp editor/plugins/item_list_editor_plugin.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Checked"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Draw Red"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Keying"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Pin value"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid ""
+"Pinning a value forces it to be saved even if it's equal to the default."
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Pin value [Disabled because '%s' is editor-only]"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+#: editor/plugins/gradient_texture_2d_editor_plugin.cpp
+#: editor/scene_tree_dock.cpp
+#: modules/visual_script/visual_script_func_nodes.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+#: modules/visual_script/visual_script_property_selector.cpp
+msgid "Set %s"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Set Multiple:"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Pinned %s"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Unpinned %s"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Copy Property"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Paste Property"
+msgstr ""
+
+#: editor/editor_inspector.cpp
+msgid "Copy Property Path"
+msgstr ""
+
+#: editor/editor_log.cpp
+msgid "Output:"
+msgstr ""
+
+#: editor/editor_log.cpp editor/plugins/tile_map_editor_plugin.cpp
+msgid "Copy Selection"
+msgstr ""
+
+#: editor/editor_log.cpp editor/editor_network_profiler.cpp
+#: editor/editor_profiler.cpp editor/editor_resource_picker.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+#: editor/property_editor.cpp editor/scene_tree_dock.cpp
+#: editor/script_editor_debugger.cpp
+#: modules/gdnative/gdnative_library_editor_plugin.cpp scene/gui/line_edit.cpp
+#: scene/gui/text_edit.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Clear"
+msgstr ""
+
+#: editor/editor_log.cpp
+msgid "Clear Output"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp editor/editor_node.cpp
+#: editor/editor_profiler.cpp
+msgid "Stop"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp editor/editor_profiler.cpp
+#: editor/plugins/animation_state_machine_editor.cpp editor/rename_dialog.cpp
+msgid "Start"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp
+msgid "%s/s"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp
+msgid "Down"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp
+msgid "Up"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp editor/editor_node.cpp
+#: scene/main/node.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Node"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp
+msgid "Incoming RPC"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp
+msgid "Incoming RSET"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp
+msgid "Outgoing RPC"
+msgstr ""
+
+#: editor/editor_network_profiler.cpp
+msgid "Outgoing RSET"
+msgstr ""
+
+#: editor/editor_node.cpp editor/project_manager.cpp
+msgid "New Window"
+msgstr ""
+
+#: editor/editor_node.cpp editor/project_manager.cpp
+msgid "Unnamed Project"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Spins when the editor window redraws.\n"
+"Update Continuously is enabled, which can increase power usage. Click to "
+"disable it."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Spins when the editor window redraws."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Imported resources can't be saved."
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/theme_editor_plugin.cpp
+#: modules/gltf/editor_scene_exporter_gltf_plugin.cpp scene/gui/dialogs.cpp
+msgid "OK"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/animation_player_editor_plugin.cpp
+msgid "Error saving resource!"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This resource can't be saved because it does not belong to the edited scene. "
+"Make it unique first."
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/animation_player_editor_plugin.cpp
+msgid "Save Resource As..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Can't open file for writing:"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Requested file format unknown:"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Error while saving."
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Can't open '%s'. The file could have been moved or deleted."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Error while parsing '%s'."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Unexpected end of file '%s'."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Missing '%s' or its dependencies."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Error while loading '%s'."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Saving Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Analyzing"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Creating Thumbnail"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "This operation can't be done without a tree root."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This scene can't be saved because there is a cyclic instancing inclusion.\n"
+"Please resolve it and then attempt to save again."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Couldn't save scene. Likely dependencies (instances or inheritance) couldn't "
+"be satisfied."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Could not save one or more scenes!"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save All Scenes"
+msgstr ""
+
+#: editor/editor_node.cpp editor/scene_tree_dock.cpp
+msgid "Can't overwrite scene that is still open!"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Can't load MeshLibrary for merging!"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Error saving MeshLibrary!"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Can't load TileSet for merging!"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Error saving TileSet!"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"An error occurred while trying to save the editor layout.\n"
+"Make sure the editor's user data path is writable."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Default editor layout overridden.\n"
+"To restore the Default layout to its base settings, use the Delete Layout "
+"option and delete the Default layout."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Layout name not found!"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Restored the Default layout to its base settings."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This resource belongs to a scene that was imported, so it's not editable.\n"
+"Please read the documentation relevant to importing scenes to better "
+"understand this workflow."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This resource belongs to a scene that was instanced or inherited.\n"
+"Changes to it won't be kept when saving the current scene."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This resource was imported, so it's not editable. Change its settings in the "
+"import panel and then re-import."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This scene was imported, so changes to it won't be kept.\n"
+"Instancing it or inheriting will allow making changes to it.\n"
+"Please read the documentation relevant to importing scenes to better "
+"understand this workflow."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This is a remote object, so changes to it won't be kept.\n"
+"Please read the documentation relevant to debugging to better understand "
+"this workflow."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "There is no defined scene to run."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save scene before running..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Could not start subprocess!"
+msgstr ""
+
+#: editor/editor_node.cpp editor/filesystem_dock.cpp
+msgid "Open Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open Base Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Quick Open..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Quick Open Scene..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Quick Open Script..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save & Reload"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save changes to '%s' before reloading?"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save & Close"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save changes to '%s' before closing?"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "%s no longer exists! Please specify a new save location."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"The current scene has no root node, but %d modified external resource(s) "
+"were saved anyway."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"A root node is required to save the scene. You can add a root node using the "
+"Scene tree dock."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save Scene As..."
+msgstr ""
+
+#: editor/editor_node.cpp modules/gltf/editor_scene_exporter_gltf_plugin.cpp
+msgid "This operation can't be done without a scene."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Export Mesh Library"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "This operation can't be done without a root node."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Export Tile Set"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "This operation can't be done without a selected node."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Current scene not saved. Open anyway?"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Can't undo while mouse buttons are pressed."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Nothing to undo."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Undo: %s"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Can't redo while mouse buttons are pressed."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Nothing to redo."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Redo: %s"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Can't reload a scene that was never saved."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Reload Saved Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"The current scene has unsaved changes.\n"
+"Reload the saved scene anyway? This action cannot be undone."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Quick Run Scene..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Quit"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Yes"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Exit the editor?"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open Project Manager?"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save changes to the following scene(s) before reloading?"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save & Quit"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save changes to the following scene(s) before quitting?"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save changes to the following scene(s) before opening Project Manager?"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This option is deprecated. Situations where refresh must be forced are now "
+"considered a bug. Please report."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Pick a Main Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Close Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Reopen Closed Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Unable to enable addon plugin at: '%s' parsing of config failed."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Unable to find script field for addon plugin at: '%s'."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Unable to load addon script from path: '%s'."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Unable to load addon script from path: '%s'. This might be due to a code "
+"error in that script.\n"
+"Disabling the addon at '%s' to prevent further errors."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Unable to load addon script from path: '%s' Base type is not EditorPlugin."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Unable to load addon script from path: '%s' Script is not in tool mode."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Scene '%s' was automatically imported, so it can't be modified.\n"
+"To make changes to it, a new inherited scene can be created."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Error loading scene, it must be inside the project path. Use 'Import' to "
+"open the scene, then save it inside the project path."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Scene '%s' has broken dependencies:"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Clear Recent Scenes"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"No main scene has ever been defined, select one?\n"
+"You can change it later in \"Project Settings\" under the 'application' "
+"category."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Selected scene '%s' does not exist, select a valid one?\n"
+"You can change it later in \"Project Settings\" under the 'application' "
+"category."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Selected scene '%s' is not a scene file, select a valid one?\n"
+"You can change it later in \"Project Settings\" under the 'application' "
+"category."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save Layout"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Delete Layout"
+msgstr ""
+
+#: editor/editor_node.cpp editor/import_dock.cpp
+#: editor/script_create_dialog.cpp
+msgid "Default"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_resource_picker.cpp
+#: editor/plugins/script_editor_plugin.cpp editor/property_editor.cpp
+msgid "Show in FileSystem"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Play This Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Close Tab"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Undo Close Tab"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Close Other Tabs"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Close Tabs to the Right"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Close All Tabs"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Switch Scene Tab"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "%d more files or folders"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "%d more folders"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "%d more files"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"Unable to write to file '%s', file in use, locked or lacking permissions."
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp editor/scene_tree_dock.cpp
+#: servers/arvr/arvr_interface.cpp
+msgid "Interface"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Scene Tabs"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Always Show Close Button"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Resize If Many Tabs"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Minimum Width"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Output"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Always Clear Output On Play"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Always Open Output On Play"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Always Close Output On Stop"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save On Focus Loss"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Save Each Scene On Quit"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Quit Confirmation"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Show Update Spinner"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Update Continuously"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Update Vital Only"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Localize Settings"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Restore Scenes On Load"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Show Thumbnail On Hover"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+msgid "Inspector"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Default Property Name Style"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Default Float Step"
+msgstr ""
+
+#: editor/editor_node.cpp scene/gui/tree.cpp
+msgid "Disable Folding"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Auto Unfold Foreign Scenes"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Horizontal Vector2 Editing"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Horizontal Vector Types Editing"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open Resources In Current Inspector"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Resources To Open In New Inspector"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Default Color Picker Mode"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/version_control_editor_plugin.cpp
+msgid "Version Control"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/version_control_editor_plugin.cpp
+msgid "Username"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/version_control_editor_plugin.cpp
+msgid "SSH Public Key Path"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/version_control_editor_plugin.cpp
+msgid "SSH Private Key Path"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Dock Position"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_plugin.cpp
+msgid "Distraction Free Mode"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Toggle distraction-free mode."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Add a new scene."
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/theme_editor_plugin.cpp
+msgid "Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Go to previously opened scene."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Copy Text"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Next tab"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Previous tab"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Filter Files..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Operations with scene files."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "New Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "New Inherited Scene..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open Scene..."
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Open Recent"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Save Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Convert To..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "MeshLibrary..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "TileSet..."
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/script_text_editor.cpp
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Undo"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/script_text_editor.cpp
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Redo"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Miscellaneous project or scene-wide tools."
+msgstr ""
+
+#: editor/editor_node.cpp editor/project_manager.cpp
+#: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Project"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Project Settings..."
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/version_control_editor_plugin.cpp
+msgid "Set Up Version Control"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Shut Down Version Control"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Export..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Install Android Build Template..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open User Data Folder"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Tools"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Orphan Resource Explorer..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Reload Current Project"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Quit to Project List"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Deploy with Remote Debug"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"When this option is enabled, using one-click deploy will make the executable "
+"attempt to connect to this computer's IP so the running project can be "
+"debugged.\n"
+"This option is intended to be used for remote debugging (typically with a "
+"mobile device).\n"
+"You don't need to enable it to use the GDScript debugger locally."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Small Deploy with Network Filesystem"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"When this option is enabled, using one-click deploy for Android will only "
+"export an executable without the project data.\n"
+"The filesystem will be provided from the project by the editor over the "
+"network.\n"
+"On Android, deploying will use the USB cable for faster performance. This "
+"option speeds up testing for projects with large assets."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Visible Collision Shapes"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"When this option is enabled, collision shapes and raycast nodes (for 2D and "
+"3D) will be visible in the running project."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Visible Navigation"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"When this option is enabled, navigation meshes and polygons will be visible "
+"in the running project."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Force Shader Fallbacks"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"When this option is enabled, shaders will be used in their fallback form "
+"(either visible via an ubershader or hidden) during all the run time.\n"
+"This is useful for verifying the look and performance of fallbacks, which "
+"are normally displayed briefly.\n"
+"Asynchronous shader compilation must be enabled in the project settings for "
+"this option to make a difference."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Synchronize Scene Changes"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"When this option is enabled, any changes made to the scene in the editor "
+"will be replicated in the running project.\n"
+"When used remotely on a device, this is more efficient when the network "
+"filesystem option is enabled."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Synchronize Script Changes"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"When this option is enabled, any script that is saved will be reloaded in "
+"the running project.\n"
+"When used remotely on a device, this is more efficient when the network "
+"filesystem option is enabled."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Editor Settings..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Editor Layout"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Take Screenshot"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Screenshots are stored in the Editor Data/Settings Folder."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Toggle Fullscreen"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open Editor Data/Settings Folder"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open Editor Data Folder"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open Editor Settings Folder"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Manage Editor Features..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Manage Export Templates..."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Online Documentation"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Questions & Answers"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Report a Bug"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Suggest a Feature"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Send Docs Feedback"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/asset_library_editor_plugin.cpp
+msgid "Community"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "About Godot"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Support Godot Development"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Play the project."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Play"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Pause the scene execution for debugging."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Pause Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Stop the scene."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Play the edited scene."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Play Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Play custom scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Play Custom Scene"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Changing the video driver requires restarting the editor."
+msgstr ""
+
+#: editor/editor_node.cpp editor/project_settings_editor.cpp
+#: editor/settings_config_dialog.cpp
+msgid "Save & Restart"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Update All Changes"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Update Vital Changes"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Hide Update Spinner"
+msgstr ""
+
+#: editor/editor_node.cpp editor/editor_settings.cpp
+#: editor/fileserver/editor_file_server.cpp
+#: modules/fbx/editor_scene_importer_fbx.cpp
+msgid "FileSystem"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Expand Bottom Panel"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Don't Save"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Android build template is missing, please install relevant templates."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Manage Templates"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Install from file"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Select android sources file"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"This will set up your project for custom Android builds by installing the "
+"source template to \"res://android/build\".\n"
+"You can then apply modifications and build your own custom APK on export "
+"(adding modules, changing the AndroidManifest.xml, etc.).\n"
+"Note that in order to make custom builds instead of using pre-built APKs, "
+"the \"Use Custom Build\" option should be enabled in the Android export "
+"preset."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"The Android build template is already installed in this project and it won't "
+"be overwritten.\n"
+"Remove the \"res://android/build\" directory manually before attempting this "
+"operation again."
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Import Templates From ZIP File"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Template Package"
+msgstr ""
+
+#: editor/editor_node.cpp modules/gltf/editor_scene_exporter_gltf_plugin.cpp
+msgid "Export Library"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Merge With Existing"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Apply MeshInstance Transforms"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open & Run a Script"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid ""
+"The following files are newer on disk.\n"
+"What action should be taken?"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/shader_editor_plugin.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Reload"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/shader_editor_plugin.cpp
+msgid "Resave"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "New Inherited"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Load Errors"
+msgstr ""
+
+#: editor/editor_node.cpp editor/plugins/tile_map_editor_plugin.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Select"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Select Current"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open 2D Editor"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open 3D Editor"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open Script Editor"
+msgstr ""
+
+#: editor/editor_node.cpp editor/project_manager.cpp
+msgid "Open Asset Library"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open the next Editor"
+msgstr ""
+
+#: editor/editor_node.cpp
+msgid "Open the previous Editor"
+msgstr ""
+
+#: editor/editor_node.h
+msgid "Warning!"
+msgstr ""
+
+#: editor/editor_path.cpp
+msgid "No sub-resources found."
+msgstr ""
+
+#: editor/editor_path.cpp
+msgid "Open a list of sub-resources."
+msgstr ""
+
+#: editor/editor_plugin.cpp
+msgid "Creating Mesh Previews"
+msgstr ""
+
+#: editor/editor_plugin.cpp
+msgid "Thumbnail..."
+msgstr ""
+
+#: editor/editor_plugin_settings.cpp
+msgid "Main Script:"
+msgstr ""
+
+#: editor/editor_plugin_settings.cpp
+msgid "Edit Plugin"
+msgstr ""
+
+#: editor/editor_plugin_settings.cpp
+msgid "Installed Plugins:"
+msgstr ""
+
+#: editor/editor_plugin_settings.cpp editor/plugin_config_dialog.cpp
+#: scene/2d/remote_transform_2d.cpp scene/3d/remote_transform.cpp
+msgid "Update"
+msgstr ""
+
+#: editor/editor_plugin_settings.cpp platform/android/export/export_plugin.cpp
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+#: platform/uwp/export/export.cpp
+msgid "Version"
+msgstr ""
+
+#: editor/editor_plugin_settings.cpp
+msgid "Author"
+msgstr ""
+
+#: editor/editor_plugin_settings.cpp
+#: modules/gdnative/gdnative_library_singleton_editor.cpp
+msgid "Status"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Measure:"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Frame Time (ms)"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Average Time (ms)"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Frame %"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Physics Frame %"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Inclusive"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Self"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid ""
+"Inclusive: Includes time from other functions called by this function.\n"
+"Use this to spot bottlenecks.\n"
+"\n"
+"Self: Only count the time spent in the function itself, not in other "
+"functions called by that function.\n"
+"Use this to find individual functions to optimize."
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Frame #:"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Calls"
+msgstr ""
+
+#: editor/editor_profiler.cpp editor/plugins/script_editor_plugin.cpp
+#: editor/script_editor_debugger.cpp
+msgid "Debugger"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Profiler Frame History Size"
+msgstr ""
+
+#: editor/editor_profiler.cpp
+msgid "Profiler Frame Max Functions"
+msgstr ""
+
+#: editor/editor_properties.cpp
+msgid "Edit Text:"
+msgstr ""
+
+#: editor/editor_properties.cpp editor/script_create_dialog.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "On"
+msgstr ""
+
+#: editor/editor_properties.cpp modules/gridmap/grid_map.cpp
+#: scene/2d/collision_object_2d.cpp scene/2d/tile_map.cpp
+#: scene/3d/collision_object.cpp scene/3d/soft_body.cpp
+#: scene/main/canvas_layer.cpp
+msgid "Layer"
+msgstr ""
+
+#: editor/editor_properties.cpp
+msgid "Bit %d, value %d"
+msgstr ""
+
+#: editor/editor_properties.cpp
+msgid "[Empty]"
+msgstr ""
+
+#: editor/editor_properties.cpp editor/plugins/root_motion_editor_plugin.cpp
+msgid "Assign..."
+msgstr ""
+
+#: editor/editor_properties.cpp
+msgid "Invalid RID"
+msgstr ""
+
+#: editor/editor_properties.cpp
+msgid ""
+"Can't create a ViewportTexture on resources saved as a file.\n"
+"Resource needs to belong to a scene."
+msgstr ""
+
+#: editor/editor_properties.cpp
+msgid ""
+"Can't create a ViewportTexture on this resource because it's not set as "
+"local to scene.\n"
+"Please switch on the 'local to scene' property on it (and all resources "
+"containing it up to a node)."
+msgstr ""
+
+#: editor/editor_properties.cpp editor/property_editor.cpp
+msgid "Pick a Viewport"
+msgstr ""
+
+#: editor/editor_properties.cpp editor/property_editor.cpp
+msgid "Selected node is not a Viewport!"
+msgstr ""
+
+#: editor/editor_properties_array_dict.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Size:"
+msgstr ""
+
+#: editor/editor_properties_array_dict.cpp
+msgid "Page:"
+msgstr ""
+
+#: editor/editor_properties_array_dict.cpp
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove Item"
+msgstr ""
+
+#: editor/editor_properties_array_dict.cpp
+msgid "New Key:"
+msgstr ""
+
+#: editor/editor_properties_array_dict.cpp
+msgid "New Value:"
+msgstr ""
+
+#: editor/editor_properties_array_dict.cpp
+msgid "Add Key/Value Pair"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp
+msgid ""
+"The selected resource (%s) does not match any type expected for this "
+"property (%s)."
+msgstr ""
+
+#: editor/editor_resource_picker.cpp
+msgid "Quick Load"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp editor/property_editor.cpp
+msgid "Make Unique"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/animation_state_machine_editor.cpp
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+#: editor/plugins/tile_map_editor_plugin.cpp editor/property_editor.cpp
+#: editor/scene_tree_dock.cpp scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Paste"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp editor/property_editor.cpp
+msgid "Convert to %s"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp editor/property_editor.cpp
+msgid "New %s"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp editor/plugins/theme_editor_plugin.cpp
+#: modules/visual_script/visual_script_flow_control.cpp
+#: modules/visual_script/visual_script_func_nodes.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "Base Type"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp
+msgid "Edited Resource"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp scene/gui/line_edit.cpp
+#: scene/gui/slider.cpp scene/gui/spin_box.cpp
+msgid "Editable"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp editor/property_editor.cpp
+msgid "New Script"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp editor/scene_tree_dock.cpp
+msgid "Extend Script"
+msgstr ""
+
+#: editor/editor_resource_picker.cpp
+msgid "Script Owner"
+msgstr ""
+
+#: editor/editor_run_native.cpp
+msgid ""
+"No runnable export preset found for this platform.\n"
+"Please add a runnable preset in the Export menu or define an existing preset "
+"as runnable."
+msgstr ""
+
+#: editor/editor_run_native.cpp
+msgid "Project Run"
+msgstr ""
+
+#: editor/editor_run_script.cpp
+msgid "Write your logic in the _run() method."
+msgstr ""
+
+#: editor/editor_run_script.cpp
+msgid "There is an edited scene already."
+msgstr ""
+
+#: editor/editor_run_script.cpp
+msgid "Couldn't instance script:"
+msgstr ""
+
+#: editor/editor_run_script.cpp
+msgid "Did you forget the 'tool' keyword?"
+msgstr ""
+
+#: editor/editor_run_script.cpp
+msgid "Couldn't run script:"
+msgstr ""
+
+#: editor/editor_run_script.cpp
+msgid "Did you forget the '_run' method?"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Editor Language"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Display Scale"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Custom Display Scale"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Main Font Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Code Font Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Font Antialiased"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Font Hinting"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Main Font"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Main Font Bold"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Code Font"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Dim Editor On Dialog Popup"
+msgstr ""
+
+#: editor/editor_settings.cpp main/main.cpp
+msgid "Low Processor Mode Sleep (µsec)"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Unfocused Low Processor Mode Sleep (µsec)"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Separate Distraction Mode"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Automatically Open Screenshots"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Max Array Dictionary Items Per Page"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/theme_editor_plugin.cpp scene/gui/control.cpp
+#: scene/register_scene_types.cpp
+msgid "Theme"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/import_dock.cpp
+msgid "Preset"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Icon And Font Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Base Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Accent Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/environment.cpp
+msgid "Contrast"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Relationship Line Opacity"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Highlight Tabs"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Border Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Use Graph Node Headers"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Additional Spacing"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Custom Theme"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Show Script Button"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Directories"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Autoscan Project Path"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Default Project Path"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "On Save"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Compress Binary Resources"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Safe Save On Backup Then Rename"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "File Dialog"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Thumbnail Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Docks"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Scene Tree"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Start Create Dialog Fully Expanded"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Always Show Folders"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Property Editor"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Auto Refresh Interval"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Subresource Hue Tint"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Color Theme"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/3d/label_3d.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Line Spacing"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
+#: modules/gdscript/editor/gdscript_highlighter.cpp
+msgid "Highlighting"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/gui/text_edit.cpp
+msgid "Syntax Highlighting"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/gui/text_edit.cpp
+msgid "Highlight All Occurrences"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/gui/text_edit.cpp
+msgid "Highlight Current Line"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
+msgid "Highlight Type Safe Lines"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Indent"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
+msgid "Auto Indent"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Convert Indent On Save"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/gui/text_edit.cpp
+msgid "Draw Tabs"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/gui/text_edit.cpp
+msgid "Draw Spaces"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/spatial_editor_plugin.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/tile_map.cpp
+#: scene/main/scene_tree.cpp scene/resources/world.cpp
+#: scene/resources/world_2d.cpp
+msgid "Navigation"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/gui/text_edit.cpp
+msgid "Smooth Scrolling"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/gui/text_edit.cpp
+msgid "V Scroll Speed"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Show Minimap"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Minimap Width"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Mouse Extra Buttons Navigate History"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Drag And Drop Selection"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Stay In Script Editor On Node Selected"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Appearance"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/gui/text_edit.cpp
+msgid "Show Line Numbers"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Line Numbers Zero Padded"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Show Bookmark Gutter"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Show Breakpoint Gutter"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Show Info Gutter"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Code Folding"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Word Wrap"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Show Line Length Guidelines"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Line Length Guideline Soft Column"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Line Length Guideline Hard Column"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Script List"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Show Members Overview"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Files"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Trim Trailing Whitespace On Save"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Autosave Interval Secs"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Restore Scripts On Load"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Auto Reload And Parse Scripts On Save"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Auto Reload Scripts On External Change"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Create Signal Callbacks"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Sort Members Outline Alphabetically"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Cursor"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Scroll Past End Of File"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Block Caret"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Caret Blink"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Caret Blink Speed"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Right Click Moves Caret"
+msgstr ""
+
+#: editor/editor_settings.cpp modules/gdscript/gdscript.cpp
+#: modules/gdscript/gdscript_editor.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Completion"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Idle Parse Delay"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Auto Brace Complete"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Code Complete Delay"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Put Callhint Tooltip Below Current Line"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Callhint Tooltip Offset"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Complete File Paths"
+msgstr ""
+
+#: editor/editor_settings.cpp modules/gdscript/gdscript_editor.cpp
+msgid "Add Type Hints"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Use Single Quotes"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Show Help Index"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Help Font Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Help Source Font Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Help Title Font Size"
+msgstr ""
+
+#: editor/editor_settings.cpp modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Grid Map"
+msgstr ""
+
+#: editor/editor_settings.cpp modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Pick Distance"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/tile_map_editor_plugin.cpp
+msgid "Preview Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Primary Grid Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Secondary Grid Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Selection Box Color"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/path_editor_plugin.cpp
+#: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
+msgid "3D Gizmos"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/path_editor_plugin.cpp
+#: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
+msgid "Gizmo Colors"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Instanced"
+msgstr ""
+
+#: editor/editor_settings.cpp modules/gltf/gltf_node.cpp
+#: scene/3d/physics_body.cpp
+msgid "Joint"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/2d/collision_shape_2d.cpp
+#: scene/2d/cpu_particles_2d.cpp scene/2d/touch_screen_button.cpp
+#: scene/3d/collision_shape.cpp scene/3d/cpu_particles.cpp
+#: scene/3d/occluder.cpp scene/3d/spring_arm.cpp
+#: scene/resources/particles_material.cpp servers/physics_2d_server.cpp
+#: servers/physics_server.cpp
+msgid "Shape"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Primary Grid Steps"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Grid Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Grid Division Level Max"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Grid Division Level Min"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Grid Division Level Bias"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Grid XZ Plane"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Grid XY Plane"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Grid YZ Plane"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Default FOV"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Default Z Near"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Default Z Far"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Lightmap Baking Number Of CPU Threads"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Navigation Scheme"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Invert Y Axis"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Invert X Axis"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Zoom Style"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Emulate Numpad"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Emulate 3 Button Mouse"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Orbit Modifier"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Pan Modifier"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Zoom Modifier"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/spatial_editor_plugin.cpp
+msgid "Warped Mouse Panning"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Navigation Feel"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Orbit Sensitivity"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Orbit Inertia"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Translation Inertia"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Zoom Inertia"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Freelook"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Freelook Navigation Scheme"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Freelook Sensitivity"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Freelook Inertia"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Freelook Base Speed"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Freelook Activation Modifier"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Freelook Speed Zoom Link"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/tile_map_editor_plugin.cpp
+msgid "Grid Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Guides Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Smart Snapping Line Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Bone Width"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Bone Color 1"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Bone Color 2"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Bone Selected Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Bone IK Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Bone Outline Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Bone Outline Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Viewport Border Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Constrain Editor View"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Simple Panning"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Scroll To Pan"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Pan Speed"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Poly Editor"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Point Grab Radius"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Show Previous Outline"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/scene_tree_dock.cpp
+msgid "Autorename Animation Tracks"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Default Create Bezier Tracks"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Default Create Reset Tracks"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Onion Layers Past Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Onion Layers Future Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Visual Editors"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Minimap Opacity"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Window Placement"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/2d/back_buffer_copy.cpp scene/2d/sprite.cpp
+#: scene/2d/visibility_notifier_2d.cpp scene/3d/sprite_3d.cpp
+#: scene/gui/control.cpp
+msgid "Rect"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Rect Custom Position"
+msgstr ""
+
+#: editor/editor_settings.cpp platform/android/export/export_plugin.cpp
+msgid "Screen"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Auto Save"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Save Before Running"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Font Size"
+msgstr ""
+
+#: editor/editor_settings.cpp
+#: modules/gdscript/language_server/gdscript_language_server.cpp
+msgid "Remote Host"
+msgstr ""
+
+#: editor/editor_settings.cpp
+#: modules/gdscript/language_server/gdscript_language_server.cpp
+msgid "Remote Port"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Editor SSL Certificates"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "HTTP Proxy"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Host"
+msgstr ""
+
+#: editor/editor_settings.cpp editor/fileserver/editor_file_server.cpp
+#: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Port"
+msgstr ""
+
+#. TRANSLATORS: Project Manager here refers to the tool used to create/manage Godot projects.
+#: editor/editor_settings.cpp
+msgid "Project Manager"
+msgstr ""
+
+#. TRANSLATORS: Project Manager here refers to the tool used to create/manage Godot projects.
+#: editor/editor_settings.cpp
+msgid "Sorting Order"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Symbol Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Keyword Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Control Flow Keyword Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Base Type Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Engine Type Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "User Type Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Comment Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "String Color"
+msgstr ""
+
+#: editor/editor_settings.cpp platform/javascript/export/export.cpp
+#: platform/uwp/export/export.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Background Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Completion Background Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Completion Selected Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Completion Existing Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Completion Scroll Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Completion Font Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Text Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Line Number Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Safe Line Number Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Caret Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Caret Background Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Text Selected Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Selection Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Brace Mismatch Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Current Line Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Line Length Guideline Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Word Highlighted Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Number Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Function Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Member Variable Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Mark Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Bookmark Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Breakpoint Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Executing Line Color"
+msgstr ""
+
+#: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Code Folding Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Search Result Color"
+msgstr ""
+
+#: editor/editor_settings.cpp
+msgid "Search Result Border Color"
+msgstr ""
+
+#: editor/editor_spin_slider.cpp
+msgid "Hold %s to round to integers. Hold Shift for more precise changes."
+msgstr ""
+
+#: editor/editor_spin_slider.cpp scene/gui/button.cpp
+msgid "Flat"
+msgstr ""
+
+#: editor/editor_spin_slider.cpp
+msgid "Hide Slider"
+msgstr ""
+
+#: editor/editor_sub_scene.cpp
+msgid "Select Node(s) to Import"
+msgstr ""
+
+#: editor/editor_sub_scene.cpp editor/project_manager.cpp
+msgid "Browse"
+msgstr ""
+
+#: editor/editor_sub_scene.cpp
+msgid "Scene Path:"
+msgstr ""
+
+#: editor/editor_sub_scene.cpp
+msgid "Import From Node:"
+msgstr ""
+
+#. TRANSLATORS: %s refers to the name of a version control system (e.g. "Git").
+#: editor/editor_vcs_interface.cpp
+msgid "%s Error"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Open the folder containing these templates."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Uninstall these templates."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "There are no mirrors available."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Retrieving the mirror list..."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Starting the download..."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Error requesting URL:"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Connecting to the mirror..."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Can't resolve the requested address."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Can't connect to the mirror."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "No response from the mirror."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Request failed."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Request ended up in a redirect loop."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Request failed:"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Download complete; extracting templates..."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Cannot remove temporary file:"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid ""
+"Templates installation failed.\n"
+"The problematic templates archives can be found at '%s'."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Error getting the list of mirrors."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Error parsing JSON with the list of mirrors. Please report this issue!"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Best available mirror"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid ""
+"No download links found for this version. Direct download is only available "
+"for official releases."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Disconnected"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Resolving"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Can't Resolve"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Connecting..."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Can't Connect"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Connected"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Requesting..."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Downloading"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Connection Error"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "SSL Handshake Error"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Can't open the export templates file."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Invalid version.txt format inside the export templates file: %s."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "No version.txt found inside the export templates file."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Error creating path for extracting templates:"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Extracting Export Templates"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Importing:"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Remove templates for the version '%s'?"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Uncompressing Android Build Sources"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Export Template Manager"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Current Version:"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Export templates are missing. Download them or install from a file."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Export templates are installed and ready to be used."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Open Folder"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Open the folder containing installed templates for the current version."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Uninstall"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Uninstall templates for the current version."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Download from:"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Open in Web Browser"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Copy Mirror URL"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Download and Install"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid ""
+"Download and install templates for the current version from the best "
+"possible mirror."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Official export templates aren't available for development builds."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Install from File"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Install templates from a local file."
+msgstr ""
+
+#: editor/export_template_manager.cpp editor/find_in_files.cpp
+#: editor/progress_dialog.cpp scene/gui/dialogs.cpp
+msgid "Cancel"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Cancel the download of the templates."
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Other Installed Versions:"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Uninstall Template"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Select Template File"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid "Godot Export Templates"
+msgstr ""
+
+#: editor/export_template_manager.cpp
+msgid ""
+"The templates will continue to download.\n"
+"You may experience a short editor freeze when they finish."
+msgstr ""
+
+#: editor/fileserver/editor_file_server.cpp
+msgid "File Server"
+msgstr ""
+
+#: editor/fileserver/editor_file_server.cpp
+#: editor/plugins/version_control_editor_plugin.cpp
+#: platform/uwp/export/export.cpp platform/windows/export/export.cpp
+msgid "Password"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Favorites"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Status: Import of file failed. Please fix file and reimport manually."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid ""
+"Importing has been disabled for this file, so it can't be opened for editing."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Cannot move/rename resources root."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Cannot move a folder into itself."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Error moving:"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Error duplicating:"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Unable to update dependencies:"
+msgstr ""
+
+#: editor/filesystem_dock.cpp editor/scene_tree_editor.cpp
+msgid "No name provided."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Provided name contains invalid characters."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "A file or folder with this name already exists."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Name contains invalid characters."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid ""
+"This file extension is not recognized by the editor.\n"
+"If you want to rename it anyway, use your operating system's file manager.\n"
+"After renaming to an unknown extension, the file won't be shown in the "
+"editor anymore."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid ""
+"The following files or folders conflict with items in the target location "
+"'%s':\n"
+"\n"
+"%s\n"
+"\n"
+"Do you wish to overwrite them?"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Renaming file:"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Renaming folder:"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Duplicating file:"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Duplicating folder:"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "New Inherited Scene"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Set As Main Scene"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Open Scenes"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Instance"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Add to Favorites"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Remove from Favorites"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Edit Dependencies..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "View Owners..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Move To..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "New Scene..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp editor/plugins/script_editor_plugin.cpp
+msgid "New Script..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "New Resource..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp editor/inspector_dock.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+#: editor/script_editor_debugger.cpp
+msgid "Expand All"
+msgstr ""
+
+#: editor/filesystem_dock.cpp editor/inspector_dock.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+#: editor/script_editor_debugger.cpp
+msgid "Collapse All"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Sort files"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Sort by Name (Ascending)"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Sort by Name (Descending)"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Sort by Type (Ascending)"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Sort by Type (Descending)"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Sort by Last Modified"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Sort by First Modified"
+msgstr ""
+
+#: editor/filesystem_dock.cpp editor/plugins/animation_player_editor_plugin.cpp
+msgid "Duplicate..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp editor/plugins/animation_player_editor_plugin.cpp
+msgid "Rename..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Focus the search box"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Previous Folder/File"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Next Folder/File"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Re-Scan Filesystem"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Toggle Split Mode"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Search files"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid ""
+"Scanning Files,\n"
+"Please Wait..."
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Move"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+#: editor/project_manager.cpp editor/rename_dialog.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Rename"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Overwrite"
+msgstr ""
+
+#: editor/filesystem_dock.cpp
+msgid "Create Scene"
+msgstr ""
+
+#: editor/filesystem_dock.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Create Script"
+msgstr ""
+
+#: editor/find_in_files.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Find in Files"
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid "Find:"
+msgstr ""
+
+#: editor/find_in_files.cpp editor/rename_dialog.cpp
+msgid "Replace:"
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid "Folder:"
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid "Filters:"
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid ""
+"Include the files with the following extensions. Add or remove them in "
+"ProjectSettings."
+msgstr ""
+
+#: editor/find_in_files.cpp editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp
+msgid "Find..."
+msgstr ""
+
+#: editor/find_in_files.cpp editor/plugins/script_text_editor.cpp
+msgid "Replace..."
+msgstr ""
+
+#: editor/find_in_files.cpp editor/plugins/script_editor_plugin.cpp
+msgid "Replace in Files"
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid "Replace All (NO UNDO)"
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid "Searching..."
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid "%d match in %d file."
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid "%d matches in %d file."
+msgstr ""
+
+#: editor/find_in_files.cpp
+msgid "%d matches in %d files."
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Add to Group"
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Remove from Group"
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Group name already exists."
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Invalid group name."
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Rename Group"
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Delete Group"
+msgstr ""
+
+#: editor/groups_editor.cpp editor/node_dock.cpp
+msgid "Groups"
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Nodes Not in Group"
+msgstr ""
+
+#: editor/groups_editor.cpp editor/scene_tree_dock.cpp
+#: editor/scene_tree_editor.cpp
+msgid "Filter nodes"
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Nodes in Group"
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Empty groups will be automatically removed."
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Group Editor"
+msgstr ""
+
+#: editor/groups_editor.cpp
+msgid "Manage Groups"
+msgstr ""
+
+#: editor/import/editor_import_collada.cpp
+msgid "Collada"
+msgstr ""
+
+#: editor/import/editor_import_collada.cpp
+msgid "Use Ambient"
+msgstr ""
+
+#: editor/import/resource_importer_bitmask.cpp
+msgid "Create From"
+msgstr ""
+
+#: editor/import/resource_importer_bitmask.cpp
+#: servers/audio/effects/audio_effect_compressor.cpp
+msgid "Threshold"
+msgstr ""
+
+#: editor/import/resource_importer_csv_translation.cpp
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_scene.cpp
+#: editor/import/resource_importer_texture.cpp
+#: editor/import/resource_importer_wav.cpp scene/3d/gi_probe.cpp
+msgid "Compress"
+msgstr ""
+
+#: editor/import/resource_importer_csv_translation.cpp
+msgid "Delimiter"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+msgid "ColorCorrect"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+msgid "No BPTC If RGB"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
+#: scene/resources/material.cpp scene/resources/particles_material.cpp
+#: scene/resources/texture.cpp scene/resources/visual_shader.cpp
+msgid "Flags"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp scene/animation/tween.cpp
+#: scene/resources/texture.cpp
+msgid "Repeat"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp scene/2d/light_2d.cpp
+#: scene/gui/control.cpp
+msgid "Filter"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp
+msgid "Mipmaps"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp
+msgid "Anisotropic"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+#: editor/import/resource_importer_texture.cpp
+msgid "sRGB"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+msgid "Slices"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+#: scene/gui/aspect_ratio_container.cpp scene/gui/control.cpp
+#: scene/gui/nine_patch_rect.cpp scene/gui/scroll_container.cpp
+#: scene/resources/style_box.cpp
+msgid "Horizontal"
+msgstr ""
+
+#: editor/import/resource_importer_layered_texture.cpp
+#: scene/gui/aspect_ratio_container.cpp scene/gui/control.cpp
+#: scene/gui/nine_patch_rect.cpp scene/gui/scroll_container.cpp
+#: scene/resources/style_box.cpp
+msgid "Vertical"
+msgstr ""
+
+#: editor/import/resource_importer_obj.cpp
+msgid "Generate Tangents"
+msgstr ""
+
+#: editor/import/resource_importer_obj.cpp
+msgid "Scale Mesh"
+msgstr ""
+
+#: editor/import/resource_importer_obj.cpp
+msgid "Offset Mesh"
+msgstr ""
+
+#: editor/import/resource_importer_obj.cpp
+#: editor/import/resource_importer_scene.cpp
+msgid "Octahedral Compression"
+msgstr ""
+
+#: editor/import/resource_importer_obj.cpp
+msgid "Optimize Mesh Flags"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import as Single Scene"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import with Separate Animations"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import with Separate Materials"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import with Separate Objects"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import with Separate Objects+Materials"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import with Separate Objects+Animations"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import with Separate Materials+Animations"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import with Separate Objects+Materials+Animations"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import as Multiple Scenes"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Import as Multiple Scenes+Materials"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
+#: scene/3d/physics_joint.cpp
+msgid "Nodes"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Root Type"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Root Name"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Root Scale"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Custom Script"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp scene/resources/texture.cpp
+msgid "Storage"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Use Legacy Names"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
+msgid "Materials"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Keep On Reimport"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
+msgid "Meshes"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Ensure Tangents"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Light Baking"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Lightmap Texel Size"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
+msgid "Skins"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Use Named Skins"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "External Files"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Store In Subdir"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Filter Script"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Keep Custom Tracks"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Optimizer"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+#: editor/plugins/item_list_editor_plugin.cpp main/main.cpp
+#: modules/mono/mono_gd/gd_mono.cpp platform/javascript/export/export.cpp
+#: platform/osx/export/export.cpp scene/2d/camera_2d.cpp scene/2d/light_2d.cpp
+#: scene/2d/navigation_polygon.cpp scene/2d/ray_cast_2d.cpp scene/2d/sprite.cpp
+#: scene/2d/y_sort.cpp scene/3d/audio_stream_player_3d.cpp
+#: scene/3d/baked_lightmap.cpp scene/3d/interpolated_camera.cpp
+#: scene/3d/light.cpp scene/3d/navigation_mesh_instance.cpp
+#: scene/3d/physics_joint.cpp scene/3d/ray_cast.cpp scene/3d/skeleton.cpp
+#: scene/3d/sprite_3d.cpp scene/gui/graph_edit.cpp
+#: scene/gui/rich_text_label.cpp scene/resources/curve.cpp
+#: scene/resources/environment.cpp scene/resources/material.cpp
+msgid "Enabled"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Max Linear Error"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Max Angular Error"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Max Angle"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Remove Unused Tracks"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Clips"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/2d/particles_2d.cpp scene/3d/area.cpp scene/3d/cpu_particles.cpp
+#: scene/3d/particles.cpp scene/resources/environment.cpp
+msgid "Amount"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Import Scene"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Importing Scene..."
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Generating Lightmaps"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Generating for Mesh:"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Running Custom Script..."
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Couldn't load post-import script:"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Invalid/broken script for post-import (check console):"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Error running post-import script:"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Did you return a Node-derived object in the `post_import()` method?"
+msgstr ""
+
+#: editor/import/resource_importer_scene.cpp
+msgid "Saving..."
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid ""
+"%s: Texture detected as used as a normal map in 3D. Enabling red-green "
+"texture compression to reduce memory usage (blue channel is discarded)."
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid ""
+"%s: Texture detected as used in 3D. Enabling filter, repeat, mipmap "
+"generation and VRAM texture compression."
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "2D, Detect 3D"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "2D Pixel"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp scene/resources/texture.cpp
+msgid "Lossy Quality"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "HDR Mode"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "BPTC LDR"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/2d/mesh_instance_2d.cpp scene/2d/multimesh_instance_2d.cpp
+#: scene/2d/particles_2d.cpp scene/2d/sprite.cpp scene/resources/style_box.cpp
+msgid "Normal Map"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "Process"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "Fix Alpha Border"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "Premult Alpha"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "Hdr As Srgb"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "Invert Color"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "Normal Map Invert Y"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "Size Limit"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "Detect 3D"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid "SVG"
+msgstr ""
+
+#: editor/import/resource_importer_texture.cpp
+msgid ""
+"Warning, no suitable PC VRAM compression enabled in Project Settings. This "
+"texture will not display correctly on PC."
+msgstr ""
+
+#: editor/import/resource_importer_texture_atlas.cpp
+msgid "Atlas File"
+msgstr ""
+
+#: editor/import/resource_importer_texture_atlas.cpp
+msgid "Import Mode"
+msgstr ""
+
+#: editor/import/resource_importer_texture_atlas.cpp
+msgid "Crop To Region"
+msgstr ""
+
+#: editor/import/resource_importer_texture_atlas.cpp
+msgid "Trim Alpha Border From Region"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp scene/2d/physics_body_2d.cpp
+msgid "Force"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp
+msgid "8 Bit"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp main/main.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
+msgid "Mono"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp
+msgid "Max Rate"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp
+msgid "Max Rate Hz"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp
+msgid "Trim"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp
+msgid "Normalize"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp
+#: scene/resources/audio_stream_sample.cpp
+msgid "Loop Mode"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp
+#: scene/resources/audio_stream_sample.cpp
+msgid "Loop Begin"
+msgstr ""
+
+#: editor/import/resource_importer_wav.cpp
+#: scene/resources/audio_stream_sample.cpp
+msgid "Loop End"
+msgstr ""
+
+#: editor/import_defaults_editor.cpp
+msgid "Select Importer"
+msgstr ""
+
+#: editor/import_defaults_editor.cpp
+msgid "Importer:"
+msgstr ""
+
+#: editor/import_defaults_editor.cpp
+msgid "Reset to Defaults"
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid "Keep File (No Import)"
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid "%d Files"
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid "Set as Default for '%s'"
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid "Clear Default for '%s'"
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid "Reimport"
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid ""
+"You have pending changes that haven't been applied yet. Click Reimport to "
+"apply changes made to the import options.\n"
+"Selecting another resource in the FileSystem dock without clicking Reimport "
+"first will discard changes made in the Import dock."
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid "Import As:"
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid "Save Scenes, Re-Import, and Restart"
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid "Changing the type of an imported file requires editor restart."
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid ""
+"WARNING: Assets exist that use this resource, they may stop loading properly."
+msgstr ""
+
+#: editor/import_dock.cpp
+msgid ""
+"Select a resource file in the filesystem or in the inspector to adjust "
+"import settings."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Failed to load resource."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Property Name Style"
+msgstr ""
+
+#: editor/inspector_dock.cpp scene/gui/color_picker.cpp
+msgid "Raw"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Capitalized"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Localized"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Localization not available for current language."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Copy Properties"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Paste Properties"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Make Sub-Resources Unique"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Create a new resource in memory and edit it."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Load an existing resource from disk and edit it."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Save the currently edited resource."
+msgstr ""
+
+#: editor/inspector_dock.cpp editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Save As..."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Extra resource options."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Edit Resource from Clipboard"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Copy Resource"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Make Resource Built-In"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Go to the previous edited object in history."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Go to the next edited object in history."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "History of recently edited objects."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Open documentation for this object."
+msgstr ""
+
+#: editor/inspector_dock.cpp editor/scene_tree_dock.cpp
+msgid "Open Documentation"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Filter properties"
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Manage object properties."
+msgstr ""
+
+#: editor/inspector_dock.cpp
+msgid "Changes may be lost!"
+msgstr ""
+
+#: editor/multi_node_edit.cpp
+msgid "MultiNode Set"
+msgstr ""
+
+#: editor/node_dock.cpp
+msgid "Select a single node to edit its signals and groups."
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp
+msgid "Edit a Plugin"
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp
+msgid "Create a Plugin"
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp
+msgid "Plugin Name:"
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp
+msgid "Subfolder:"
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Author:"
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Version:"
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp editor/script_create_dialog.cpp
+msgid "Language:"
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp
+msgid "Script Name:"
+msgstr ""
+
+#: editor/plugin_config_dialog.cpp
+msgid "Activate now?"
+msgstr ""
+
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Create Polygon"
+msgstr ""
+
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Create points."
+msgstr ""
+
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+msgid ""
+"Edit points.\n"
+"LMB: Move Point\n"
+"RMB: Erase Point"
+msgstr ""
+
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+msgid "Erase points."
+msgstr ""
+
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+msgid "Edit Polygon"
+msgstr ""
+
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+msgid "Insert Point"
+msgstr ""
+
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+msgid "Edit Polygon (Remove Point)"
+msgstr ""
+
+#: editor/plugins/abstract_polygon_2d_editor.cpp
+msgid "Remove Polygon And Point"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/animation_state_machine_editor.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Add Animation"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_state_machine_editor.cpp
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Add %s"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Load..."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Move Node Point"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+msgid "Change BlendSpace1D Limits"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+msgid "Change BlendSpace1D Labels"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "This type of node can't be used. Only root nodes are allowed."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Add Node Point"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Add Animation Point"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+msgid "Remove BlendSpace1D Point"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+msgid "Move BlendSpace1D Node Point"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid ""
+"AnimationTree is inactive.\n"
+"Activate to enable playback, check node warnings if activation fails."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Set the blending position within the space"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Select and move points, create points with RMB."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp scene/gui/graph_edit.cpp
+msgid "Enable snap and show grid."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Point"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Open Editor"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_1d_editor.cpp
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Open Animation Node"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Triangle already exists."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Add Triangle"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Change BlendSpace2D Limits"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Change BlendSpace2D Labels"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Remove BlendSpace2D Point"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Remove BlendSpace2D Triangle"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "BlendSpace2D does not belong to an AnimationTree node."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "No triangles exist, so no blending can take place."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Toggle Auto Triangles"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Create triangles by connecting points."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Erase points and triangles."
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+msgid "Generate blend triangles automatically (instead of manually)"
+msgstr ""
+
+#: editor/plugins/animation_blend_space_2d_editor.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Blend:"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Parameter Changed:"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Edit Filters"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Output node can't be added to the blend tree."
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Add Node to BlendTree"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Node Moved"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Unable to connect, port may be in use or connection may be invalid."
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Nodes Connected"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Nodes Disconnected"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Set Animation"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Delete Node"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Delete Node(s)"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Toggle Filter On/Off"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Change Filter"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "No animation player set, so unable to retrieve track names."
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Player path set is invalid, so unable to retrieve track names."
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/root_motion_editor_plugin.cpp
+msgid ""
+"Animation player has no valid root node path, so unable to retrieve track "
+"names."
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Anim Clips"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Audio Clips"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Functions"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Node Renamed"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Add Node..."
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+#: editor/plugins/root_motion_editor_plugin.cpp
+msgid "Edit Filtered Tracks:"
+msgstr ""
+
+#: editor/plugins/animation_blend_tree_editor_plugin.cpp
+msgid "Enable Filtering"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Toggle Autoplay"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "New Animation Name:"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "New Anim"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Create New Animation"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Change Animation Name:"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Rename Animation"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Delete Animation?"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Remove Animation"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Invalid animation name!"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Animation name already exists!"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Duplicate Animation"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Blend Next Changed"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Change Blend Time"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Load Animation"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "No animation resource on clipboard!"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Pasted Animation"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Paste Animation"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Play selected animation backwards from current pos. (A)"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Play selected animation backwards from end. (Shift+A)"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Stop animation playback. (S)"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Play selected animation from start. (Shift+D)"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Play selected animation from current pos. (D)"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Animation position (in seconds)."
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Scale animation playback globally for the node."
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Animation Tools"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "New"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Paste As Reference"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Edit Transitions..."
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Open in Inspector"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Display list of animations in player."
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Autoplay on Load"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Enable Onion Skinning"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Onion Skinning Options"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Directions"
+msgstr ""
+
+#. TRANSLATORS: Opposite of "Future", refers to a direction in animation onion skinning.
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Past"
+msgstr ""
+
+#. TRANSLATORS: Opposite of "Past", refers to a direction in animation onion skinning.
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Future"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp modules/csg/csg_shape.cpp
+#: scene/3d/collision_polygon.cpp scene/main/scene_tree.cpp
+#: scene/resources/material.cpp scene/resources/primitive_meshes.cpp
+#: servers/audio/effects/audio_effect_phaser.cpp
+msgid "Depth"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "1 step"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "2 steps"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "3 steps"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Differences Only"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Force White Modulate"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Include Gizmos (3D)"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Pin AnimationPlayer"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Animation Name:"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp editor/property_editor.cpp
+msgid "Error!"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Blend Times:"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Next (Auto Queue):"
+msgstr ""
+
+#: editor/plugins/animation_player_editor_plugin.cpp
+msgid "Cross-Animation Blend Times"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Move Node"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Transition exists!"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Add Transition"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Node"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "End"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Immediate"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+#: scene/animation/animation_blend_tree.cpp
+msgid "Sync"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "At End"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+#: scene/3d/vehicle_body.cpp
+msgid "Travel"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Start and end nodes are needed for a sub-transition."
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "No playback resource set at path: %s."
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Node Removed"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Transition Removed"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Set Start Node (Autoplay)"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid ""
+"Select and move nodes.\n"
+"RMB to add new nodes.\n"
+"Shift+LMB to create connections."
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Create new nodes."
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Connect nodes."
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Remove selected node or transition."
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Toggle autoplay this animation on start, restart or seek to zero."
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Set the end animation. This is useful for sub-transitions."
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Transition:"
+msgstr ""
+
+#: editor/plugins/animation_state_machine_editor.cpp
+msgid "Play Mode:"
+msgstr ""
+
+#: editor/plugins/animation_tree_editor_plugin.cpp
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "AnimationTree"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "New name:"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Fade In (s):"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Fade Out (s):"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+#: scene/resources/style_box.cpp scene/resources/visual_shader.cpp
+msgid "Blend"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Auto Restart:"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Restart (s):"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Random Restart (s):"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Start!"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Amount:"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Blend 0:"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Blend 1:"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "X-Fade Time (s):"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Input"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Clear Auto-Advance"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Set Auto-Advance"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Delete Input"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Animation tree is valid."
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Animation tree is invalid."
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Animation Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "OneShot Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Mix Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Blend2 Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Blend3 Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Blend4 Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "TimeScale Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "TimeSeek Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Transition Node"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Import Animations..."
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Edit Node Filters"
+msgstr ""
+
+#: editor/plugins/animation_tree_player_editor_plugin.cpp
+msgid "Filters..."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp scene/main/http_request.cpp
+msgid "Use Threads"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Contents:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "View Files"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Download"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Connection error, please try again."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Can't connect."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Can't connect to host:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "No response from host:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "No response."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Can't resolve hostname:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Can't resolve."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Request failed, return code:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Cannot save response to:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Write error."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Request failed, too many redirects"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Redirect loop."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Request failed, timeout"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Timeout."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Failed:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Bad download hash, assuming file has been tampered with."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Expected:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Got:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Failed SHA-256 hash check"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Asset Download Error:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Downloading (%s / %s)..."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Downloading..."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Resolving..."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Error making request"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Idle"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Install..."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Retry"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Download Error"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Available URLs"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Download for this asset is already in progress!"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Recently Updated"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Least Recently Updated"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Name (A-Z)"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Name (Z-A)"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "License (A-Z)"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "License (Z-A)"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Loading..."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgctxt "Pagination"
+msgid "First"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgctxt "Pagination"
+msgid "Previous"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgctxt "Pagination"
+msgid "Next"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgctxt "Pagination"
+msgid "Last"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "All"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Search templates, projects, and demos"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Search assets (excluding templates, projects, and demos)"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Import..."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Plugins..."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp editor/project_manager.cpp
+msgid "Sort:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Category:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Site:"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Support"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Official"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Testing"
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Failed to get repository configuration."
+msgstr ""
+
+#: editor/plugins/asset_library_editor_plugin.cpp
+msgid "Assets ZIP File"
+msgstr ""
+
+#: editor/plugins/audio_stream_editor_plugin.cpp
+msgid "Audio Preview Play/Pause"
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid ""
+"Can't determine a save path for lightmap images.\n"
+"Save your scene and try again."
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid ""
+"No meshes to bake. Make sure they contain an UV2 channel and that the 'Use "
+"In Baked Light' and 'Generate Lightmap' flags are on."
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid "Failed creating lightmap images, make sure path is writable."
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid "Failed determining lightmap size. Maximum lightmap size too small?"
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid ""
+"Some mesh is invalid. Make sure the UV2 channel values are contained within "
+"the [0.0,1.0] square region."
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid ""
+"Godot editor was built without ray tracing support, lightmaps can't be baked."
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid "Bake Lightmaps"
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid "LightMap Bake"
+msgstr ""
+
+#: editor/plugins/baked_lightmap_editor_plugin.cpp
+msgid "Select lightmap bake file:"
+msgstr ""
+
+#: editor/plugins/camera_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp scene/resources/mesh_library.cpp
+msgid "Preview"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Configure Snap"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Grid Offset:"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Grid Step:"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Primary Line Every:"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "steps"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Rotation Offset:"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Rotation Step:"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Scale Step:"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Move Vertical Guide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Create Vertical Guide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Remove Vertical Guide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Move Horizontal Guide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Create Horizontal Guide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Remove Horizontal Guide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Create Horizontal and Vertical Guides"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Set CanvasItem \"%s\" Pivot Offset to (%d, %d)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Rotate %d CanvasItems"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Rotate CanvasItem \"%s\" to %d degrees"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Move CanvasItem \"%s\" Anchor"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Scale Node2D \"%s\" to (%s, %s)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Resize Control \"%s\" to (%d, %d)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Scale %d CanvasItems"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Scale CanvasItem \"%s\" to (%s, %s)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Move %d CanvasItems"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Move CanvasItem \"%s\" to (%d, %d)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Locked"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Grouped"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid ""
+"Children of containers have their anchors and margins values overridden by "
+"their parent."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Presets for the anchors and margins values of a Control node."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid ""
+"When active, moving Control nodes changes their anchors instead of their "
+"margins."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp scene/resources/style_box.cpp
+msgid "Top Left"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp scene/resources/style_box.cpp
+msgid "Top Right"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp scene/resources/style_box.cpp
+msgid "Bottom Right"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp scene/resources/style_box.cpp
+msgid "Bottom Left"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Center Left"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Center Top"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Center Right"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Center Bottom"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Center"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Left Wide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Top Wide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Right Wide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Bottom Wide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "VCenter Wide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "HCenter Wide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Full Rect"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Keep Ratio"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Anchors only"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Change Anchors and Margins"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Change Anchors"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid ""
+"Project Camera Override\n"
+"Overrides the running project's camera with the editor viewport camera."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid ""
+"Project Camera Override\n"
+"No project instance running. Run the project from the editor to use this "
+"feature."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Lock Selected"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Unlock Selected"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Group Selected"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Ungroup Selected"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Paste Pose"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Clear Guides"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Create Custom Bone(s) from Node(s)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Clear Bones"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Make IK Chain"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Clear IK Chain"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid ""
+"Warning: Children of a container get their position and size determined only "
+"by their parent."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+#: editor/plugins/texture_region_editor_plugin.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp scene/gui/graph_edit.cpp
+msgid "Zoom Reset"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp scene/gui/item_list.cpp
+#: scene/gui/tree.cpp
+msgid "Select Mode"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Drag: Rotate selected node around pivot."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Alt+Drag: Move selected node."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Alt+Drag: Scale selected node."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "V: Set selected node's pivot position."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Alt+RMB: Show list of all nodes at position clicked, including locked."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "RMB: Add node at position clicked."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Move Mode"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Rotate Mode"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Scale Mode"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Shift: Scale proportionally."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid ""
+"Show a list of all objects at the position clicked\n"
+"(same as Alt+RMB in select mode)."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Click to change object's rotation pivot."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Pan Mode"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Ruler Mode"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Toggle smart snapping."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Use Smart Snap"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Toggle grid snapping."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Use Grid Snap"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Snapping Options"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Use Rotation Snap"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Use Scale Snap"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Snap Relative"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Use Pixel Snap"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Smart Snapping"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Configure Snap..."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Snap to Parent"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Snap to Node Anchor"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Snap to Node Sides"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Snap to Node Center"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Snap to Other Nodes"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Snap to Guides"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Lock the selected object in place (can't be moved)."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Lock Selected Node(s)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Unlock the selected object (can be moved)."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Unlock Selected Node(s)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Makes sure the object's children are not selectable."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Group Selected Node(s)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Restores the object's children's ability to be selected."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Ungroup Selected Node(s)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Skeleton Options"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show Bones"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Make Custom Bone(s) from Node(s)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Clear Custom Bones"
+msgstr ""
+
+#. TRANSLATORS: Noun, name of the 2D/3D View menus.
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show When Snapping"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Hide"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Toggle Grid"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Grid"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show Helpers"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show Rulers"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show Guides"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show Origin"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show Viewport"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Show Group And Lock Icons"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Center Selection"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Frame Selection"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Preview Canvas Scale"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Layout"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Translation mask for inserting keys."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Rotation mask for inserting keys."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Scale mask for inserting keys."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Insert keys (based on mask)."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid ""
+"Auto insert keys when objects are translated, rotated or scaled (based on "
+"mask).\n"
+"Keys are only added to existing tracks, no new tracks will be created.\n"
+"Keys must be inserted manually for the first time."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Auto Insert Key"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Animation Key and Pose Options"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Insert Key (Existing Tracks)"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Copy Pose"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Clear Pose"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Add Node Here"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Instance Scene Here"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Multiply grid step by 2"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Divide grid step by 2"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Pan View"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 3.125%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 6.25%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 12.5%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 25%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 50%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 100%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 200%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 400%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 800%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Zoom to 1600%"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Adding %s..."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Cannot instantiate multiple nodes without root."
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp editor/scene_tree_dock.cpp
+msgid "Create Node"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+#: editor/plugins/spatial_editor_plugin.cpp editor/scene_tree_dock.cpp
+msgid "Error instancing scene from %s"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid "Change Default Type"
+msgstr ""
+
+#: editor/plugins/canvas_item_editor_plugin.cpp
+msgid ""
+"Drag & drop + Shift : Add node as sibling\n"
+"Drag & drop + Alt : Change node type"
+msgstr ""
+
+#: editor/plugins/collision_polygon_editor_plugin.cpp
+msgid "Create Polygon3D"
+msgstr ""
+
+#: editor/plugins/collision_polygon_editor_plugin.cpp
+msgid "Edit Poly"
+msgstr ""
+
+#: editor/plugins/collision_polygon_editor_plugin.cpp
+msgid "Edit Poly (Remove Point)"
+msgstr ""
+
+#: editor/plugins/collision_shape_2d_editor_plugin.cpp
+msgid "Set Handle"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Load Emission Mask"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/cpu_particles_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Restart"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Clear Emission Mask"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_editor_plugin.cpp editor/spatial_editor_gizmos.cpp
+msgid "Particles"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Generated Point Count:"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Emission Mask"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Solid Pixels"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Border Pixels"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Directed Border Pixels"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Capture from Pixel"
+msgstr ""
+
+#: editor/plugins/cpu_particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Emission Colors"
+msgstr ""
+
+#: editor/plugins/cpu_particles_editor_plugin.cpp
+msgid "CPUParticles"
+msgstr ""
+
+#: editor/plugins/cpu_particles_editor_plugin.cpp
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Create Emission Points From Mesh"
+msgstr ""
+
+#: editor/plugins/cpu_particles_editor_plugin.cpp
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Create Emission Points From Node"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Flat 0"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Flat 1"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp editor/property_editor.cpp
+msgid "Ease In"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp editor/property_editor.cpp
+msgid "Ease Out"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Smoothstep"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Modify Curve Point"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Modify Curve Tangent"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Load Curve Preset"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Add Point"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Remove Point"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Left Linear"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Right Linear"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Load Preset"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Remove Curve Point"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Toggle Curve Linear Tangent"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Hold Shift to edit tangents individually"
+msgstr ""
+
+#: editor/plugins/curve_editor_plugin.cpp
+msgid "Right click to add point"
+msgstr ""
+
+#: editor/plugins/gi_probe_editor_plugin.cpp
+msgid "Bake GI Probe"
+msgstr ""
+
+#: editor/plugins/gradient_editor_plugin.cpp
+msgid "Gradient Edited"
+msgstr ""
+
+#: editor/plugins/gradient_texture_2d_editor_plugin.cpp
+msgid "Swap GradientTexture2D Fill Points"
+msgstr ""
+
+#: editor/plugins/gradient_texture_2d_editor_plugin.cpp
+msgid "Swap Gradient Fill Points"
+msgstr ""
+
+#: editor/plugins/gradient_texture_2d_editor_plugin.cpp
+msgid "Toggle Grid Snap"
+msgstr ""
+
+#: editor/plugins/item_list_editor_plugin.cpp editor/project_export.cpp
+#: scene/3d/label_3d.cpp scene/gui/button.cpp scene/gui/dialogs.cpp
+#: scene/gui/label.cpp scene/gui/line_edit.cpp scene/gui/link_button.cpp
+#: scene/gui/rich_text_label.cpp scene/gui/text_edit.cpp
+#: scene/resources/primitive_meshes.cpp
+msgid "Text"
+msgstr ""
+
+#: editor/plugins/item_list_editor_plugin.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp main/main.cpp
+#: platform/osx/export/export.cpp platform/windows/export/export.cpp
+#: scene/gui/button.cpp scene/gui/item_list.cpp
+msgid "Icon"
+msgstr ""
+
+#: editor/plugins/item_list_editor_plugin.cpp
+msgid "ID"
+msgstr ""
+
+#: editor/plugins/item_list_editor_plugin.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Separator"
+msgstr ""
+
+#: editor/plugins/item_list_editor_plugin.cpp
+msgid "Item %d"
+msgstr ""
+
+#: editor/plugins/item_list_editor_plugin.cpp
+msgid "Items"
+msgstr ""
+
+#: editor/plugins/item_list_editor_plugin.cpp
+msgid "Item List Editor"
+msgstr ""
+
+#: editor/plugins/light_occluder_2d_editor_plugin.cpp
+msgid "Create Occluder Polygon"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Mesh is empty!"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Couldn't create a Trimesh collision shape."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Static Trimesh Body"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "This doesn't work on scene root!"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Trimesh Static Shape"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Can't create a single convex collision shape for the scene root."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Couldn't create a single convex collision shape."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Simplified Convex Shape"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Single Convex Shape"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Can't create multiple convex collision shapes for the scene root."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Couldn't create any collision shapes."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Multiple Convex Shapes"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Navigation Mesh"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Contained Mesh is not of type ArrayMesh."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "UV Unwrap failed, mesh may not be manifold?"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "No mesh to debug."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Mesh has no UV in layer %d."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "MeshInstance lacks a Mesh!"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Mesh has not surface to create outlines from!"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Mesh primitive type is not PRIMITIVE_TRIANGLES!"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Could not create outline!"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Outline"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp modules/csg/csg_shape.cpp
+#: modules/gltf/gltf_mesh.cpp modules/gltf/gltf_node.cpp
+#: scene/2d/mesh_instance_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/3d/mesh_instance.cpp scene/resources/mesh_library.cpp
+#: scene/resources/multimesh.cpp scene/resources/primitive_meshes.cpp
+#: scene/resources/texture.cpp
+msgid "Mesh"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Trimesh Static Body"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid ""
+"Creates a StaticBody and assigns a polygon-based collision shape to it "
+"automatically.\n"
+"This is the most accurate (but slowest) option for collision detection."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Trimesh Collision Sibling"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid ""
+"Creates a polygon-based collision shape.\n"
+"This is the most accurate (but slowest) option for collision detection."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Single Convex Collision Sibling"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid ""
+"Creates a single convex collision shape.\n"
+"This is the fastest (but least accurate) option for collision detection."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Simplified Convex Collision Sibling"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid ""
+"Creates a simplified convex collision shape.\n"
+"This is similar to single collision shape, but can result in a simpler "
+"geometry in some cases, at the cost of accuracy."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Multiple Convex Collision Siblings"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid ""
+"Creates a polygon-based collision shape.\n"
+"This is a performance middle-ground between a single convex collision and a "
+"polygon-based collision."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Outline Mesh..."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid ""
+"Creates a static outline mesh. The outline mesh will have its normals "
+"flipped automatically.\n"
+"This can be used instead of the SpatialMaterial Grow property when using "
+"that property isn't possible."
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "View UV1"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "View UV2"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Unwrap UV2 for Lightmap/AO"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Create Outline Mesh"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "Outline Size:"
+msgstr ""
+
+#: editor/plugins/mesh_instance_editor_plugin.cpp
+msgid "UV Channel Debug"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Remove item %d?"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid ""
+"Update from existing scene?:\n"
+"%s"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "MeshLibrary"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Add Item"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Remove Selected Item"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Import from Scene (Ignore Transforms)"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Import from Scene (Apply Transforms)"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Update from Scene"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Apply without Transforms"
+msgstr ""
+
+#: editor/plugins/mesh_library_editor_plugin.cpp
+msgid "Apply with Transforms"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "No mesh source specified (and no MultiMesh set in node)."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "No mesh source specified (and MultiMesh contains no Mesh)."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Mesh source is invalid (invalid path)."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Mesh source is invalid (not a MeshInstance)."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Mesh source is invalid (contains no Mesh resource)."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "No surface source specified."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Surface source is invalid (invalid path)."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Surface source is invalid (no geometry)."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Surface source is invalid (no faces)."
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Select a Source Mesh:"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Select a Target Surface:"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Populate Surface"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Populate MultiMesh"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Target Surface:"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Source Mesh:"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "X-Axis"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Y-Axis"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Z-Axis"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Mesh Up Axis:"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Random Rotation:"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Random Tilt:"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Random Scale:"
+msgstr ""
+
+#: editor/plugins/multimesh_editor_plugin.cpp
+msgid "Populate"
+msgstr ""
+
+#: editor/plugins/navigation_polygon_editor_plugin.cpp
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Create Navigation Polygon"
+msgstr ""
+
+#: editor/plugins/particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Convert to CPUParticles"
+msgstr ""
+
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Generating Visibility Rect"
+msgstr ""
+
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Generate Visibility Rect"
+msgstr ""
+
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Can only set point into a ParticlesMaterial process material"
+msgstr ""
+
+#: editor/plugins/particles_2d_editor_plugin.cpp
+msgid "Convert to CPUParticles2D"
+msgstr ""
+
+#: editor/plugins/particles_2d_editor_plugin.cpp
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Generation Time (sec):"
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "The geometry's faces don't contain any area."
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "The geometry doesn't contain any faces."
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "\"%s\" doesn't inherit from Spatial."
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "\"%s\" doesn't contain geometry."
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "\"%s\" doesn't contain face geometry."
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Create Emitter"
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Emission Points:"
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Surface Points"
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Surface Points+Normal (Directed)"
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp scene/gui/video_player.cpp
+msgid "Volume"
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Emission Source:"
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "A processor material of type 'ParticlesMaterial' is required."
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Generating AABB"
+msgstr ""
+
+#: editor/plugins/particles_editor_plugin.cpp
+msgid "Generate Visibility AABB"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Remove Point from Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Remove Out-Control from Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Remove In-Control from Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Add Point to Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Split Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Move Point in Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Move In-Control in Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Move Out-Control in Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Select Points"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Shift+Drag: Select Control Points"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Click: Add Point"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Left Click: Split Segment (in curve)"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Right Click: Delete Point"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+msgid "Select Control Points (Shift+Drag)"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Add Point (in empty space)"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Delete Point"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Close Curve"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+#: editor/plugins/theme_editor_preview.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp editor/project_export.cpp
+#: main/main.cpp servers/visual_server.cpp
+msgid "Options"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Mirror Handle Angles"
+msgstr ""
+
+#: editor/plugins/path_2d_editor_plugin.cpp
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Mirror Handle Lengths"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Curve Point #"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Set Curve Point Position"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Set Curve In Position"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Set Curve Out Position"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Split Path"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Remove Path Point"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Remove Out-Control Point"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Remove In-Control Point"
+msgstr ""
+
+#: editor/plugins/path_editor_plugin.cpp
+msgid "Split Segment (in curve)"
+msgstr ""
+
+#: editor/plugins/physical_bone_plugin.cpp
+msgid "Move Joint"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid ""
+"The skeleton property of the Polygon2D does not point to a Skeleton2D node"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Sync Bones"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid ""
+"No texture in this polygon.\n"
+"Set a texture to be able to edit UV."
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Create UV Map"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid ""
+"Polygon 2D has internal vertices, so it can no longer be edited in the "
+"viewport."
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Create Polygon & UV"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Create Internal Vertex"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Remove Internal Vertex"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Invalid Polygon (need 3 different vertices)"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Add Custom Polygon"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Remove Custom Polygon"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Transform UV Map"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Transform Polygon"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Paint Bone Weights"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Open Polygon 2D UV editor."
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Polygon 2D UV Editor"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp scene/2d/polygon_2d.cpp
+msgid "UV"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/2d/line_2d.cpp scene/3d/cpu_particles.cpp scene/3d/portal.cpp
+#: scene/3d/room.cpp scene/resources/convex_polygon_shape.cpp
+#: scene/resources/convex_polygon_shape_2d.cpp
+msgid "Points"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp scene/2d/polygon_2d.cpp
+#: scene/resources/navigation_mesh.cpp
+msgid "Polygons"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp scene/3d/skeleton.cpp
+msgid "Bones"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Move Points"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Command: Rotate"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Shift: Move All"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Shift+Command: Scale"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Ctrl: Rotate"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Shift+Ctrl: Scale"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Move Polygon"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Rotate Polygon"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Scale Polygon"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Create a custom polygon. Enables custom polygon rendering."
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid ""
+"Remove a custom polygon. If none remain, custom polygon rendering is "
+"disabled."
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Paint weights with specified intensity."
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Unpaint weights with specified intensity."
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Radius:"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Copy Polygon to UV"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Copy UV to Polygon"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Clear UV"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Grid Settings"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp modules/csg/csg_shape.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Snap"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Enable Snap"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Show Grid"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Configure Grid:"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Grid Offset X:"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Grid Offset Y:"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Grid Step X:"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Grid Step Y:"
+msgstr ""
+
+#: editor/plugins/polygon_2d_editor_plugin.cpp
+msgid "Sync Bones to Polygon"
+msgstr ""
+
+#: editor/plugins/ray_cast_2d_editor_plugin.cpp
+msgid "Set cast_to"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+msgid "ERROR: Couldn't load resource!"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+msgid "Add Resource"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+msgid "Rename Resource"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Delete Resource"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+msgid "Resource clipboard is empty!"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+msgid "Paste Resource"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+#: editor/scene_tree_editor.cpp
+msgid "Instance:"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+msgid "Open in Editor"
+msgstr ""
+
+#: editor/plugins/resource_preloader_editor_plugin.cpp
+msgid "Load Resource"
+msgstr ""
+
+#: editor/plugins/room_manager_editor_plugin.cpp
+msgid "Flip Portals"
+msgstr ""
+
+#: editor/plugins/room_manager_editor_plugin.cpp
+msgid "Room Generate Points"
+msgstr ""
+
+#: editor/plugins/room_manager_editor_plugin.cpp
+msgid "Generate Points"
+msgstr ""
+
+#: editor/plugins/room_manager_editor_plugin.cpp
+msgid "Flip Portal"
+msgstr ""
+
+#: editor/plugins/room_manager_editor_plugin.cpp
+msgid "Occluder Set Transform"
+msgstr ""
+
+#: editor/plugins/room_manager_editor_plugin.cpp
+msgid "Center Node"
+msgstr ""
+
+#: editor/plugins/root_motion_editor_plugin.cpp
+msgid "AnimationTree has no path set to an AnimationPlayer"
+msgstr ""
+
+#: editor/plugins/root_motion_editor_plugin.cpp
+msgid "Path to AnimationPlayer is invalid"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Clear Recent Files"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Close and save changes?"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Error writing TextFile:"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Could not load file at:"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Error saving file!"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Error while saving theme."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Error Saving"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Error importing theme."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Error Importing"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "New Text File..."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Open File"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Save File As..."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Can't obtain the script for running."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Script failed reloading, check console for errors."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Script is not in tool mode, will not be able to run."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid ""
+"To run this script, it must inherit EditorScript and be set to tool mode."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Import Theme"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Error while saving theme"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Error saving"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Save Theme As..."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "%s Class Reference"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp
+msgid "Find Next"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp
+msgid "Find Previous"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Filter scripts"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Toggle alphabetical sorting of the method list."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Filter methods"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp scene/2d/y_sort.cpp
+msgid "Sort"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp editor/scene_tree_dock.cpp
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Move Up"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp editor/scene_tree_dock.cpp
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Move Down"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Next Script"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Previous Script"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "File"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Open..."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Reopen Closed Script"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Save All"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Soft Reload Script"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Copy Script Path"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "History Previous"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "History Next"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Import Theme..."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Reload Theme"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Save Theme"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Close All"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Close Docs"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/script_text_editor.cpp
+#: editor/plugins/shader_editor_plugin.cpp editor/plugins/text_editor.cpp
+#: editor/plugins/visual_shader_editor_plugin.cpp
+#: editor/project_settings_editor.cpp editor/settings_config_dialog.cpp
+msgid "Search"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp editor/script_editor_debugger.cpp
+msgid "Step Into"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp editor/script_editor_debugger.cpp
+msgid "Step Over"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp editor/script_editor_debugger.cpp
+msgid "Break"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp editor/project_manager.cpp
+#: editor/script_editor_debugger.cpp
+msgid "Continue"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Keep Debugger Open"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Debug with External Editor"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+#: editor/plugins/shader_editor_plugin.cpp
+msgid "Online Docs"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Open Godot online documentation."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Search the reference documentation."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Go to previous edited document."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Go to next edited document."
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Discard"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid ""
+"The following files are newer on disk.\n"
+"What action should be taken?:"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Search Results"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Open Dominant Script On Scene Change"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "External"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Use External Editor"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Exec Path"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Script Temperature Enabled"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Highlight Current Script"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Script Temperature History Size"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Current Script Background Color"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Group Help Pages"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Sort Scripts By"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "List Script Names As"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Exec Flags"
+msgstr ""
+
+#: editor/plugins/script_editor_plugin.cpp
+msgid "Clear Recent Scripts"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Connections to method:"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp editor/script_editor_debugger.cpp
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Source"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp platform/uwp/export/export.cpp
+#: scene/3d/interpolated_camera.cpp scene/animation/skeleton_ik.cpp
+msgid "Target"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid ""
+"Missing connected method '%s' for signal '%s' from node '%s' to node '%s'."
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "[Ignore]"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Line"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Go to Function"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Only resources from filesystem can be dropped."
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Can't drop nodes because script '%s' is not used in this scene."
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Lookup Symbol"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Pick Color"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp editor/plugins/text_editor.cpp
+msgid "Convert Case"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp editor/plugins/text_editor.cpp
+#: scene/3d/label_3d.cpp scene/gui/label.cpp
+#: scene/resources/primitive_meshes.cpp
+msgid "Uppercase"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp editor/plugins/text_editor.cpp
+msgid "Lowercase"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp editor/plugins/text_editor.cpp
+msgid "Capitalize"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp editor/plugins/text_editor.cpp
+msgid "Syntax Highlighter"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+#: editor/plugins/shader_editor_plugin.cpp editor/plugins/text_editor.cpp
+msgid "Bookmarks"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Breakpoints"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+#: editor/plugins/shader_editor_plugin.cpp editor/plugins/text_editor.cpp
+msgid "Go To"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp editor/scene_tree_dock.cpp
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Cut"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp editor/plugins/theme_editor_plugin.cpp
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Select All"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Delete Line"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Indent Left"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Indent Right"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Toggle Comment"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Fold/Unfold Line"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Fold All Lines"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Unfold All Lines"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Complete Symbol"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Evaluate Selection"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Trim Trailing Whitespace"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Convert Indent to Spaces"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Convert Indent to Tabs"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Find in Files..."
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Replace in Files..."
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Contextual Help"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Toggle Bookmark"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Go to Next Bookmark"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Go to Previous Bookmark"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Remove All Bookmarks"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Go to Function..."
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Go to Line..."
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Toggle Breakpoint"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Remove All Breakpoints"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Go to Next Breakpoint"
+msgstr ""
+
+#: editor/plugins/script_text_editor.cpp
+msgid "Go to Previous Breakpoint"
+msgstr ""
+
+#: editor/plugins/shader_editor_plugin.cpp
+msgid ""
+"This shader has been modified on on disk.\n"
+"What action should be taken?"
+msgstr ""
+
+#: editor/plugins/shader_editor_plugin.cpp scene/resources/material.cpp
+msgid "Shader"
+msgstr ""
+
+#: editor/plugins/skeleton_2d_editor_plugin.cpp
+msgid "This skeleton has no bones, create some children Bone2D nodes."
+msgstr ""
+
+#: editor/plugins/skeleton_2d_editor_plugin.cpp
+msgid "Set Rest Pose to Bones"
+msgstr ""
+
+#: editor/plugins/skeleton_2d_editor_plugin.cpp
+msgid "Create Rest Pose from Bones"
+msgstr ""
+
+#: editor/plugins/skeleton_2d_editor_plugin.cpp
+msgid "Skeleton2D"
+msgstr ""
+
+#: editor/plugins/skeleton_2d_editor_plugin.cpp
+msgid "Reset to Rest Pose"
+msgstr ""
+
+#: editor/plugins/skeleton_2d_editor_plugin.cpp
+msgid "Overwrite Rest Pose"
+msgstr ""
+
+#: editor/plugins/skeleton_editor_plugin.cpp
+msgid "Create physical bones"
+msgstr ""
+
+#: editor/plugins/skeleton_editor_plugin.cpp editor/spatial_editor_gizmos.cpp
+#: modules/gltf/gltf_node.cpp modules/gltf/gltf_skin.cpp
+#: scene/2d/polygon_2d.cpp scene/3d/mesh_instance.cpp
+msgid "Skeleton"
+msgstr ""
+
+#: editor/plugins/skeleton_editor_plugin.cpp
+msgid "Create physical skeleton"
+msgstr ""
+
+#: editor/plugins/skeleton_ik_editor_plugin.cpp
+msgid "Play IK"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Orthogonal"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp modules/gltf/gltf_camera.cpp
+msgid "Perspective"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Top Orthogonal"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Top Perspective"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Bottom Orthogonal"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Bottom Perspective"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Left Orthogonal"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Left Perspective"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Right Orthogonal"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Right Perspective"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Front Orthogonal"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Front Perspective"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Rear Orthogonal"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Rear Perspective"
+msgstr ""
+
+#. TRANSLATORS: This will be appended to the view name when Auto Orthogonal is enabled.
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid " [auto]"
+msgstr ""
+
+#. TRANSLATORS: This will be appended to the view name when Portal Occulusion is enabled.
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid " [portals active]"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Transform Aborted."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "X-Axis Transform."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Y-Axis Transform."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Z-Axis Transform."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Plane Transform."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+#: editor/plugins/texture_region_editor_plugin.cpp
+#: editor/plugins/theme_editor_plugin.cpp scene/resources/visual_shader.cpp
+msgid "None"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp scene/2d/path_2d.cpp
+msgid "Rotate"
+msgstr ""
+
+#. TRANSLATORS: This refers to the movement that changes the position of an object.
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Translate"
+msgstr ""
+
+#. TRANSLATORS: Refers to changing the scale of a node in the 3D editor.
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Scaling:"
+msgstr ""
+
+#. TRANSLATORS: Refers to changing the position of a node in the 3D editor.
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Translating:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Rotating %s degrees."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Keying is disabled (no key inserted)."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Animation Key Inserted."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Pitch:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Yaw:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Objects Drawn:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Material Changes:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Shader Changes:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Surface Changes:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Draw Calls:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Vertices:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "FPS: %d (%s ms)"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Top View."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Bottom View."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Left View."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Right View."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Front View."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Rear View."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Align Transform with View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Align Rotation with View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp editor/scene_tree_dock.cpp
+msgid "No parent to instance a child at."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp editor/scene_tree_dock.cpp
+msgid "This operation requires a single selected node."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Auto Orthogonal Enabled"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Lock View Rotation"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Display Normal"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Display Wireframe"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Display Overdraw"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Display Unshaded"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Environment"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Gizmos"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Information"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View FPS"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Half Resolution"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp scene/main/viewport.cpp
+msgid "Audio Listener"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Enable Doppler"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Cinematic Preview"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "(Not in GLES2)"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid ""
+"Debug draw modes are only available when using the GLES3 renderer, not GLES2."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Freelook Left"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Freelook Right"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Freelook Forward"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Freelook Backwards"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Freelook Up"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Freelook Down"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Freelook Speed Modifier"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Freelook Slow Modifier"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Toggle Camera Preview"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Rotation Locked"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid ""
+"To zoom further, change the camera's clipping planes (View -> Settings...)"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid ""
+"Note: The FPS value displayed is the editor's framerate.\n"
+"It cannot be used as a reliable indication of in-game performance."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Convert Rooms"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "XForm Dialog"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid ""
+"Click to toggle between visibility states.\n"
+"\n"
+"Open eye: Gizmo is visible.\n"
+"Closed eye: Gizmo is hidden.\n"
+"Half-open eye: Gizmo is also visible through opaque surfaces (\"x-ray\")."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Snap Nodes to Floor"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Couldn't find a solid floor to snap the selection to."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Use Local Space"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp scene/gui/graph_edit.cpp
+msgid "Use Snap"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Converts rooms for portal culling."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Bottom View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Top View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Rear View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Front View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Left View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Right View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Orbit View Down"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Orbit View Left"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Orbit View Right"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Orbit View Up"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Orbit View 180"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Switch Perspective/Orthogonal View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Insert Animation Key"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Focus Origin"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Focus Selection"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Toggle Freelook"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Decrease Field of View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Increase Field of View"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Reset Field of View to Default"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Snap Object to Floor"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Transform Dialog..."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "1 Viewport"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "2 Viewports"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "2 Viewports (Alt)"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "3 Viewports"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "3 Viewports (Alt)"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "4 Viewports"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Gizmos"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Origin"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Grid"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Portal Culling"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Occlusion Culling"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Settings..."
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Snap Settings"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Translate Snap:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Rotate Snap (deg.):"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Scale Snap (%):"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Viewport Settings"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Perspective FOV (deg.):"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Z-Near:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "View Z-Far:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Transform Change"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Translate:"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Rotate (deg.):"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Scale (ratio):"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Transform Type"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Pre"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Post"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Manipulator Gizmo Size"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Manipulator Gizmo Opacity"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Show Viewport Rotation Gizmo"
+msgstr ""
+
+#: editor/plugins/spatial_editor_plugin.cpp
+msgid "Unnamed Gizmo"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Create Mesh2D"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Mesh2D Preview"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Create Polygon2D"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Polygon2D Preview"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Create CollisionPolygon2D"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "CollisionPolygon2D Preview"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Create LightOccluder2D"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "LightOccluder2D Preview"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Sprite is empty!"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Can't convert a sprite using animation frames to mesh."
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Invalid geometry, can't replace by mesh."
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Convert to MeshInstance2D"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Invalid geometry, can't create polygon."
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Convert to Polygon2D"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Invalid geometry, can't create collision polygon."
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Create CollisionPolygon2D Sibling"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Invalid geometry, can't create light occluder."
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Create LightOccluder2D Sibling"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Sprite"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Simplification:"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Shrink (Pixels):"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Grow (Pixels):"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Update Preview"
+msgstr ""
+
+#: editor/plugins/sprite_editor_plugin.cpp
+msgid "Settings:"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "No Frames Selected"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Add %d Frame(s)"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Add Frame"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Unable to load images"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "ERROR: Couldn't load frame resource!"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Resource clipboard is empty or not a texture!"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Paste Frame"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Add Empty"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Change Animation FPS"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "(empty)"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Move Frame"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Animations:"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "New Animation"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Filter animations"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Speed:"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+#: modules/gltf/gltf_animation.cpp modules/minimp3/audio_stream_mp3.cpp
+#: modules/minimp3/resource_importer_mp3.cpp
+#: modules/stb_vorbis/audio_stream_ogg_vorbis.cpp
+#: modules/stb_vorbis/resource_importer_ogg_vorbis.cpp scene/2d/path_2d.cpp
+#: scene/3d/path.cpp scene/resources/animation.cpp scene/resources/material.cpp
+msgid "Loop"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Animation Frames:"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Add a Texture from File"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Add Frames from a Sprite Sheet"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Insert Empty (Before)"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Insert Empty (After)"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Move (Before)"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Move (After)"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Select Frames"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Horizontal:"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Vertical:"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Separation:"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Offset:"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Select/Clear All Frames"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "Create Frames from Sprite Sheet"
+msgstr ""
+
+#: editor/plugins/sprite_frames_editor_plugin.cpp
+msgid "SpriteFrames"
+msgstr ""
+
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Set Region Rect"
+msgstr ""
+
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Set Margin"
+msgstr ""
+
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Snap Mode:"
+msgstr ""
+
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Pixel Snap"
+msgstr ""
+
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Grid Snap"
+msgstr ""
+
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Auto Slice"
+msgstr ""
+
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "Step:"
+msgstr ""
+
+#: editor/plugins/texture_region_editor_plugin.cpp
+msgid "TextureRegion"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Styleboxes"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "{num} color(s)"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "No colors found."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "{num} constant(s)"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "No constants found."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "{num} font(s)"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "No fonts found."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "{num} icon(s)"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "No icons found."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "{num} stylebox(es)"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "No styleboxes found."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "{num} currently selected"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Nothing was selected for the import."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Importing Theme Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Importing items {n}/{n}"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Updating the editor"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Finalizing"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Filter:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "With Data"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select by data type:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible color items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible color items and their data."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Deselect all visible color items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible constant items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible constant items and their data."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Deselect all visible constant items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible font items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible font items and their data."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Deselect all visible font items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible icon items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible icon items and their data."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Deselect all visible icon items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible stylebox items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all visible stylebox items and their data."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Deselect all visible stylebox items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid ""
+"Caution: Adding icon data may considerably increase the size of your Theme "
+"resource."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Collapse types."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Expand types."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all Theme items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select With Data"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select all Theme items with item data."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Deselect All"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Deselect all Theme items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Import Selected"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid ""
+"Import Items tab has some items selected. Selection will be lost upon "
+"closing this window.\n"
+"Close anyway?"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove Type"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid ""
+"Select a theme type from the list to edit its items.\n"
+"You can add a custom type or import a type with its items from another theme."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove All Color Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Rename Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove All Constant Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove All Font Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove All Icon Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove All StyleBox Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid ""
+"This theme type is empty.\n"
+"Add more items to it manually or by importing from another theme."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Theme Type"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove Theme Type"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Color Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Constant Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Font Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Icon Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Stylebox Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Rename Color Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Rename Constant Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Rename Font Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Rename Icon Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Rename Stylebox Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Invalid file, not a Theme resource."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Invalid file, same as the edited Theme resource."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Manage Theme Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Edit Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Types:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Type:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Item:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add StyleBox Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove Items:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove Class Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove Custom Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Remove All Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Theme Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Old Name:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Import Items"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Default Theme"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Editor Theme"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select Another Theme Resource:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Theme Resource"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Another Theme"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Type"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Filter the list of types or create a new custom type:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Available Node-based types:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Type name is empty!"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Are you sure you want to create an empty type?"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Confirm Item Rename"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Cancel Item Rename"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Override Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Unpin this StyleBox as a main style."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid ""
+"Pin this StyleBox as a main style. Editing its properties will update the "
+"same properties in all other StyleBoxes of this type."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Item Type"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Set Variation Base Type"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Set Base Type"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Show Default"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Show default type items alongside items that have been overridden."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Override All"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Override all default type items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select the variation base type from a list of available types."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid ""
+"A type associated with a built-in class cannot be marked as a variation of "
+"another type."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Theme:"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Manage Items..."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add, remove, organize and import Theme items."
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Add Preview"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Default Preview"
+msgstr ""
+
+#: editor/plugins/theme_editor_plugin.cpp
+msgid "Select UI Scene:"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid ""
+"Toggle the control picker, allowing to visually select control types for "
+"edit."
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Toggle Button"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Disabled Button"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp scene/resources/mesh_library.cpp
+msgid "Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Disabled Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Check Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Checked Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Radio Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Checked Radio Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Named Separator"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Submenu"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Subitem 1"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Subitem 2"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Has"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Many"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Disabled LineEdit"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Tab 1"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Tab 2"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Tab 3"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Editable Item"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Subtree"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Has,Many,Options"
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Invalid path, the PackedScene resource was probably moved or removed."
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Invalid PackedScene resource, must have a Control node at its root."
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Invalid file, not a PackedScene resource."
+msgstr ""
+
+#: editor/plugins/theme_editor_preview.cpp
+msgid "Reload the scene to reflect its most actual state."
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Erase Selection"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Fix Invalid Tiles"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Cut Selection"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Paint TileMap"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Line Draw"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Rectangle Paint"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Bucket Fill"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Erase TileMap"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Find Tile"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Transpose"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Disable Autotile"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Enable Priority"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Filter tiles"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Give a TileSet resource to this TileMap to use its tiles."
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Paint Tile"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid ""
+"Shift+LMB: Line Draw\n"
+"Shift+Command+LMB: Rectangle Paint"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid ""
+"Shift+LMB: Line Draw\n"
+"Shift+Ctrl+LMB: Rectangle Paint"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Pick Tile"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Rotate Left"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Rotate Right"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Flip Horizontally"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Flip Vertically"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Clear Transform"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Tile Map"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Palette Min Width"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Palette Item H Separation"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Show Tile Names"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Show Tile Ids"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Sort Tiles By Name"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Bucket Fill Preview"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Editor Side"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Display Grid"
+msgstr ""
+
+#: editor/plugins/tile_map_editor_plugin.cpp
+msgid "Axis Color"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Add Texture(s) to TileSet."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Remove selected Texture from TileSet."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Create from Scene"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Merge from Scene"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "New Single Tile"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "New Autotile"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "New Atlas"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Next Coordinate"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Select the next shape, subtile, or Tile."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Previous Coordinate"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Select the previous shape, subtile, or Tile."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/sprite.cpp
+#: scene/3d/sprite_3d.cpp scene/resources/texture.cpp
+msgid "Region"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp modules/csg/csg_shape.cpp
+#: modules/gridmap/grid_map.cpp scene/2d/collision_object_2d.cpp
+#: scene/2d/physics_body_2d.cpp scene/2d/tile_map.cpp
+#: scene/3d/collision_object.cpp scene/3d/physics_body.cpp
+#: scene/3d/physics_joint.cpp scene/3d/soft_body.cpp scene/main/scene_tree.cpp
+#: scene/resources/shape_2d.cpp
+msgid "Collision"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Occlusion"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/touch_screen_button.cpp
+msgid "Bitmask"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/area_2d.cpp
+#: scene/3d/area.cpp scene/3d/physics_joint.cpp
+#: scene/animation/animation_node_state_machine.cpp
+msgid "Priority"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/node_2d.cpp
+msgid "Z Index"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Region Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Collision Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Occlusion Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Navigation Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Bitmask Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Priority Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp scene/gui/item_list.cpp
+msgid "Icon Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Z Index Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Copy bitmask."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Paste bitmask."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Erase bitmask."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Create a new rectangle."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "New Rectangle"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Create a new polygon."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "New Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Delete Selected Shape"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Keep polygon inside region Rect."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Enable snap and show grid (configurable via the Inspector)."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Display Tile Names (Hold Alt Key)"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid ""
+"Add or select a texture on the left panel to edit the tiles bound to it."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Remove selected texture? This will remove all tiles which use it."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "You haven't selected a texture to remove."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Create from scene? This will overwrite all current tiles."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Merge from scene?"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Remove Texture"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "%s file(s) were not added because was already on the list."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid ""
+"Drag handles to edit Rect.\n"
+"Click on another Tile to edit it."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Delete selected Rect."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid ""
+"Select current edited sub-tile.\n"
+"Click on another Tile to edit it."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Delete polygon."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid ""
+"LMB: Set bit on.\n"
+"RMB: Set bit off.\n"
+"Shift+LMB: Set wildcard bit.\n"
+"Click on another Tile to edit it."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid ""
+"Select sub-tile to use as icon, this will be also used on invalid autotile "
+"bindings.\n"
+"Click on another Tile to edit it."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid ""
+"Select sub-tile to change its priority.\n"
+"Click on another Tile to edit it."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid ""
+"Select sub-tile to change its z index.\n"
+"Click on another Tile to edit it."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Set Tile Region"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Create Tile"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Set Tile Icon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Edit Tile Bitmask"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Edit Collision Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Edit Occlusion Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Edit Navigation Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Paste Tile Bitmask"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Clear Tile Bitmask"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Make Polygon Concave"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Make Polygon Convex"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Remove Tile"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Remove Collision Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Remove Occlusion Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Remove Navigation Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Edit Tile Priority"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Edit Tile Z Index"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Make Convex"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Make Concave"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Create Collision Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Create Occlusion Polygon"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "This property can't be changed."
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Snap Options"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/animated_sprite.cpp
+#: scene/2d/camera_2d.cpp scene/2d/cpu_particles_2d.cpp scene/2d/light_2d.cpp
+#: scene/2d/parallax_background.cpp scene/2d/parallax_layer.cpp
+#: scene/2d/path_2d.cpp scene/2d/polygon_2d.cpp scene/2d/sprite.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/label_3d.cpp scene/3d/path.cpp
+#: scene/3d/physics_body.cpp scene/3d/soft_body.cpp scene/3d/sprite_3d.cpp
+#: scene/gui/graph_node.cpp scene/gui/rich_text_effect.cpp
+#: scene/main/canvas_layer.cpp scene/resources/material.cpp
+#: scene/resources/particles_material.cpp scene/resources/style_box.cpp
+msgid "Offset"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp editor/rename_dialog.cpp
+#: scene/gui/range.cpp scene/resources/animation.cpp
+#: scene/resources/visual_shader_nodes.cpp servers/physics_2d_server.cpp
+#: servers/physics_server.cpp
+msgid "Step"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Separation"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Selected Tile"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/2d/light_2d.cpp scene/2d/line_2d.cpp scene/2d/mesh_instance_2d.cpp
+#: scene/2d/multimesh_instance_2d.cpp scene/2d/particles_2d.cpp
+#: scene/2d/polygon_2d.cpp scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
+#: scene/gui/nine_patch_rect.cpp scene/gui/texture_rect.cpp
+#: scene/resources/material.cpp scene/resources/sky.cpp
+#: scene/resources/style_box.cpp scene/resources/visual_shader_nodes.cpp
+msgid "Texture"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Tex Offset"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp modules/csg/csg_shape.cpp
+#: scene/2d/canvas_item.cpp scene/2d/particles_2d.cpp
+#: scene/3d/mesh_instance.cpp scene/resources/primitive_meshes.cpp
+msgid "Material"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp scene/2d/canvas_item.cpp
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp scene/resources/style_box.cpp
+msgid "Modulate"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Tile Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Autotile Bitmask Mode"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Subtile Size"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Subtile Spacing"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Occluder Offset"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Navigation Offset"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Shape Offset"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Shape Transform"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Selected Collision"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Selected Collision One Way"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Selected Collision One Way Margin"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Selected Navigation"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Selected Occlusion"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "Tileset Script"
+msgstr ""
+
+#: editor/plugins/tile_set_editor_plugin.cpp
+msgid "TileSet"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "No VCS plugins are available."
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid ""
+"Remote settings are empty. VCS features that use the network may not work."
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "No commit message was provided."
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Commit"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Staged Changes"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Unstaged Changes"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Commit:"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Date:"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Subtitle:"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Do you want to remove the %s branch?"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Do you want to remove the %s remote?"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Apply"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Version Control System"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Initialize"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Remote Login"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Select SSH public key path"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Select SSH private key path"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "SSH Passphrase"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Detect new changes"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Discard all changes"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Stage all changes"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Unstage all changes"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Commit Message"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Commit Changes"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Commit List"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Commit list size"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Branches"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Create New Branch"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Remove Branch"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Branch Name"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Remotes"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Create New Remote"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Remove Remote"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Remote Name"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Remote URL"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Fetch"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Pull"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Push"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Force Push"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Modified"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Renamed"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Deleted"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Typechange"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Unmerged"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "View:"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Split"
+msgstr ""
+
+#: editor/plugins/version_control_editor_plugin.cpp
+msgid "Unified"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "(GLES3 only)"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Add Output"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Scalar"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Vector"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Boolean"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Sampler"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Add input port"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Add output port"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Change input port type"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Change output port type"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Change input port name"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Change output port name"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Remove input port"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Remove output port"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Set expression"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Resize VisualShader node"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Set Uniform Name"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Set Input Default Port"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Add Node to Visual Shader"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Node(s) Moved"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Duplicate Nodes"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Paste Nodes"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Delete Nodes"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Visual Shader Input Type Changed"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "UniformRef Name Changed"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Vertex"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Fragment"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp modules/gltf/gltf_node.cpp
+#: scene/3d/light.cpp
+msgid "Light"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Show resulted shader code."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Create Shader Node"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Color function."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Color operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Grayscale function."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Converts HSV vector to RGB equivalent."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Converts RGB vector to HSV equivalent."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Sepia function."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Burn operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Darken operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Difference operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Dodge operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "HardLight operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Lighten operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Overlay operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Screen operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "SoftLight operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Color constant."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Color uniform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the boolean result of the %s comparison between two parameters."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Equal (==)"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Greater Than (>)"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Greater Than or Equal (>=)"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns an associated vector if the provided scalars are equal, greater or "
+"less."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns the boolean result of the comparison between INF and a scalar "
+"parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns the boolean result of the comparison between NaN and a scalar "
+"parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Less Than (<)"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Less Than or Equal (<=)"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Not Equal (!=)"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns an associated vector if the provided boolean value is true or false."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns an associated scalar if the provided boolean value is true or false."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the boolean result of the comparison between two parameters."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns the boolean result of the comparison between INF (or NaN) and a "
+"scalar parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Boolean constant."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Boolean uniform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "'%s' input parameter for all shader modes."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Input parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "'%s' input parameter for vertex and fragment shader modes."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "'%s' input parameter for fragment and light shader modes."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "'%s' input parameter for fragment shader mode."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "'%s' input parameter for light shader mode."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "'%s' input parameter for vertex shader mode."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "'%s' input parameter for vertex and fragment shader mode."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Scalar function."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Scalar operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "E constant (2.718282). Represents the base of the natural logarithm."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Epsilon constant (0.00001). Smallest possible scalar number."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Phi constant (1.618034). Golden ratio."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Pi/4 constant (0.785398) or 45 degrees."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Pi/2 constant (1.570796) or 90 degrees."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Pi constant (3.141593) or 180 degrees."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Tau constant (6.283185) or 360 degrees."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Sqrt2 constant (1.414214). Square root of 2."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the absolute value of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the arc-cosine of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the inverse hyperbolic cosine of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the arc-sine of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the inverse hyperbolic sine of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the arc-tangent of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the arc-tangent of the parameters."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the inverse hyperbolic tangent of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Finds the nearest integer that is greater than or equal to the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Constrains a value to lie between two further values."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the cosine of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the hyperbolic cosine of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Converts a quantity in radians to degrees."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Base-e Exponential."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Base-2 Exponential."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Finds the nearest integer less than or equal to the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Computes the fractional part of the argument."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the inverse of the square root of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Natural logarithm."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Base-2 logarithm."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the greater of two values."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the lesser of two values."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Linear interpolation between two scalars."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the opposite value of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "1.0 - scalar"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns the value of the first parameter raised to the power of the second."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Converts a quantity in degrees to radians."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "1.0 / scalar"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Finds the nearest integer to the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Finds the nearest even integer to the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Clamps the value between 0.0 and 1.0."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Extracts the sign of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the sine of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the hyperbolic sine of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the square root of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"SmoothStep function( scalar(edge0), scalar(edge1), scalar(x) ).\n"
+"\n"
+"Returns 0.0 if 'x' is smaller than 'edge0' and 1.0 if x is larger than "
+"'edge1'. Otherwise the return value is interpolated between 0.0 and 1.0 "
+"using Hermite polynomials."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Step function( scalar(edge), scalar(x) ).\n"
+"\n"
+"Returns 0.0 if 'x' is smaller than 'edge' and otherwise 1.0."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the tangent of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the hyperbolic tangent of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Finds the truncated value of the parameter."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Adds scalar to scalar."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Divides scalar by scalar."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Multiplies scalar by scalar."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the remainder of the two scalars."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Subtracts scalar from scalar."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Scalar constant."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Scalar uniform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Perform the cubic texture lookup."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Perform the texture lookup."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Cubic texture uniform lookup."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "2D texture uniform lookup."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "2D texture uniform lookup with triplanar."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Transform function."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Calculate the outer product of a pair of vectors.\n"
+"\n"
+"OuterProduct treats the first parameter 'c' as a column vector (matrix with "
+"one column) and the second parameter 'r' as a row vector (matrix with one "
+"row) and does a linear algebraic matrix multiply 'c * r', yielding a matrix "
+"whose number of rows is the number of components in 'c' and whose number of "
+"columns is the number of components in 'r'."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Composes transform from four vectors."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Decomposes transform to four vectors."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Calculates the determinant of a transform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Calculates the inverse of a transform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Calculates the transpose of a transform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Multiplies transform by transform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Multiplies vector by transform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Transform constant."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Transform uniform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Vector function."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Vector operator."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Composes vector from three scalars."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Decomposes vector to three scalars."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Calculates the cross product of two vectors."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the distance between two points."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Calculates the dot product of two vectors."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns the vector that points in the same direction as a reference vector. "
+"The function has three vector parameters : N, the vector to orient, I, the "
+"incident vector, and Nref, the reference vector. If the dot product of I and "
+"Nref is smaller than zero the return value is N. Otherwise -N is returned."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Calculates the length of a vector."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Linear interpolation between two vectors."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Linear interpolation between two vectors using scalar."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Calculates the normalize product of vector."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "1.0 - vector"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "1.0 / vector"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns the vector that points in the direction of reflection ( a : incident "
+"vector, b : normal vector )."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the vector that points in the direction of refraction."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"SmoothStep function( vector(edge0), vector(edge1), vector(x) ).\n"
+"\n"
+"Returns 0.0 if 'x' is smaller than 'edge0' and 1.0 if 'x' is larger than "
+"'edge1'. Otherwise the return value is interpolated between 0.0 and 1.0 "
+"using Hermite polynomials."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"SmoothStep function( scalar(edge0), scalar(edge1), vector(x) ).\n"
+"\n"
+"Returns 0.0 if 'x' is smaller than 'edge0' and 1.0 if 'x' is larger than "
+"'edge1'. Otherwise the return value is interpolated between 0.0 and 1.0 "
+"using Hermite polynomials."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Step function( vector(edge), vector(x) ).\n"
+"\n"
+"Returns 0.0 if 'x' is smaller than 'edge' and otherwise 1.0."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Step function( scalar(edge), vector(x) ).\n"
+"\n"
+"Returns 0.0 if 'x' is smaller than 'edge' and otherwise 1.0."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Adds vector to vector."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Divides vector by vector."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Multiplies vector by vector."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Returns the remainder of the two vectors."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Subtracts vector from vector."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Vector constant."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Vector uniform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Custom Godot Shader Language expression, with custom amount of input and "
+"output ports. This is a direct injection of code into the vertex/fragment/"
+"light function, do not use it to write the function declarations inside."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Returns falloff based on the dot product of surface normal and view "
+"direction of camera (pass associated inputs to it)."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"Custom Godot Shader Language expression, which is placed on top of the "
+"resulted shader. You can place various function definitions inside and call "
+"it later in the Expressions. You can also declare varyings, uniforms and "
+"constants."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "A reference to an existing uniform."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "(Fragment/Light mode only) Scalar derivative function."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "(Fragment/Light mode only) Vector derivative function."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"(Fragment/Light mode only) (Vector) Derivative in 'x' using local "
+"differencing."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"(Fragment/Light mode only) (Scalar) Derivative in 'x' using local "
+"differencing."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"(Fragment/Light mode only) (Vector) Derivative in 'y' using local "
+"differencing."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"(Fragment/Light mode only) (Scalar) Derivative in 'y' using local "
+"differencing."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"(Fragment/Light mode only) (Vector) Sum of absolute derivative in 'x' and "
+"'y'."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid ""
+"(Fragment/Light mode only) (Scalar) Sum of absolute derivative in 'x' and "
+"'y'."
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "VisualShader"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Edit Visual Property:"
+msgstr ""
+
+#: editor/plugins/visual_shader_editor_plugin.cpp
+msgid "Visual Shader Mode Changed"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Runnable"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export the project for all the presets defined."
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "All presets must have an export path defined for Export All to work."
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Delete preset '%s'?"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Exporting All"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export Path"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Presets"
+msgstr ""
+
+#: editor/project_export.cpp editor/project_settings_editor.cpp
+msgid "Add..."
+msgstr ""
+
+#: editor/project_export.cpp
+msgid ""
+"If checked, the preset will be available for use in one-click deploy.\n"
+"Only one preset per platform may be marked as runnable."
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Resources"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export all resources in the project"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export selected scenes (and dependencies)"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export selected resources (and dependencies)"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export Mode:"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Resources to export:"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid ""
+"Filters to export non-resource files/folders\n"
+"(comma-separated, e.g: *.json, *.txt, docs/*)"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid ""
+"Filters to exclude files/folders from project\n"
+"(comma-separated, e.g: *.json, *.txt, docs/*)"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Features"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Custom (comma-separated):"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Feature List:"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Script"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "GDScript Export Mode:"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Compiled Bytecode (Faster Loading)"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Encrypted (Provide Key Below)"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Invalid Encryption Key (must be 64 hexadecimal characters long)"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "GDScript Encryption Key (256-bits as hexadecimal):"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid ""
+"Note: Encryption key needs to be stored in the binary,\n"
+"you need to build the export templates from source."
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "More Info..."
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export PCK/Zip..."
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export Project..."
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export All"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Choose an export mode:"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export All..."
+msgstr ""
+
+#: editor/project_export.cpp editor/project_manager.cpp
+msgid "ZIP File"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Godot Project Pack"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export templates for this platform are missing:"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Project Export"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Manage Export Templates"
+msgstr ""
+
+#: editor/project_export.cpp
+msgid "Export With Debug"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "The path specified doesn't exist."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Error opening package file (it's not in ZIP format)."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Invalid \".zip\" project file; it doesn't contain a \"project.godot\" file."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Please choose an empty folder."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Please choose a \"project.godot\" or \".zip\" file."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "This directory already contains a Godot project."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "New Game Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Imported Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Invalid project name."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Couldn't create folder."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "There is already a folder in this path with the specified name."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "It would be a good idea to name your project."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Invalid project path (changed anything?)."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Couldn't load project.godot in project path (error %d). It may be missing or "
+"corrupted."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Couldn't edit project.godot in project path."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Couldn't create project.godot in project path."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Error opening package file, not in ZIP format."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "The following files failed extraction from package:"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Package installed successfully!"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Rename Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Import Existing Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Import & Edit"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Create New Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Create & Edit"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Install Project:"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Install & Edit"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Project Name:"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Project Path:"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Project Installation Path:"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Renderer:"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "OpenGL ES 3.0"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Not supported by your GPU drivers."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Higher visual quality\n"
+"All features available\n"
+"Incompatible with older hardware\n"
+"Not recommended for web games"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "OpenGL ES 2.0"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Lower visual quality\n"
+"Some features not available\n"
+"Works on most hardware\n"
+"Recommended for web games"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Renderer can be changed later, but scenes may need to be adjusted."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Missing Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Error: Project is missing on the filesystem."
+msgstr ""
+
+#: editor/project_manager.cpp editor/scene_tree_dock.cpp
+msgid "Local"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Local Projects"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Asset Library Projects"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Can't open project at '%s'."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Are you sure to open more than one project?"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"The following project settings file does not specify the version of Godot "
+"through which it was created.\n"
+"\n"
+"%s\n"
+"\n"
+"If you proceed with opening it, it will be converted to Godot's current "
+"configuration file format.\n"
+"Warning: You won't be able to open the project with previous versions of the "
+"engine anymore."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"The following project settings file was generated by an older engine "
+"version, and needs to be converted for this version:\n"
+"\n"
+"%s\n"
+"\n"
+"Do you want to convert it?\n"
+"Warning: You won't be able to open the project with previous versions of the "
+"engine anymore."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"The project settings were created by a newer engine version, whose settings "
+"are not compatible with this version."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Can't run project: no main scene defined.\n"
+"Please edit the project and set the main scene in the Project Settings under "
+"the \"Application\" category."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Can't run project: Assets need to be imported.\n"
+"Please edit the project to trigger the initial import."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Are you sure to run %d projects at once?"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Remove %d projects from the list?"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Remove this project from the list?"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Remove all missing projects from the list?\n"
+"The project folders' contents won't be modified."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Language changed.\n"
+"The interface will update after restarting the editor or project manager."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"Are you sure to scan %s folders for existing Godot projects?\n"
+"This could take a while."
+msgstr ""
+
+#. TRANSLATORS: This refers to the application where users manage their Godot projects.
+#: editor/project_manager.cpp
+msgctxt "Application"
+msgid "Project Manager"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Last Modified"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Loading, please wait..."
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Edit Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Run Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Scan"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Scan Projects"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Select a Folder to Scan"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "New Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Import Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Remove Project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Remove Missing"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "About"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Restart Now"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Remove All"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Also delete project contents (no undo!)"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Can't run project"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"You currently don't have any projects.\n"
+"Would you like to explore official example projects in the Asset Library?"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid "Filter projects"
+msgstr ""
+
+#: editor/project_manager.cpp
+msgid ""
+"This field filters projects by name and last path component.\n"
+"To filter projects by name and full path, the query must contain at least "
+"one `/` character."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Physical Key"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Key "
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Joy Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Joy Axis"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Mouse Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid ""
+"Invalid action name. It cannot be empty nor contain '/', ':', '=', '\\' or "
+"'\"'"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "An action with the name '%s' already exists."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Rename Input Action Event"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Change Action deadzone"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Add Input Action Event"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "All Devices"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid " (Physical)"
+msgstr ""
+
+#: editor/project_settings_editor.cpp editor/settings_config_dialog.cpp
+msgid "Press a Key..."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Mouse Button Index:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Left Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Right Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Middle Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Wheel Up Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Wheel Down Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Wheel Left Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Wheel Right Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "X Button 1"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "X Button 2"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Joypad Axis Index:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Joypad Button Index:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Erase Input Action"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Erase Input Action Event"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Add Event"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Button"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Left Button."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Right Button."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Middle Button."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Wheel Up."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Wheel Down."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Add Global Property"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Select a setting item first!"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "No property '%s' exists."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Setting '%s' is internal, and it can't be deleted."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Delete Item"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid ""
+"Invalid action name. It cannot be empty nor contain '/', ':', '=', '\\' or "
+"'\"'."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Add Input Action"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Error saving settings."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Settings saved OK."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Moved Input Action Event"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Override for Feature"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Add %d Translations"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Remove Translation"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Translation Resource Remap: Add %d Path(s)"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Translation Resource Remap: Add %d Remap(s)"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Change Resource Remap Language"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Remove Resource Remap"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Remove Resource Remap Option"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Changed Locale Filter"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Changed Locale Filter Mode"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Project Settings (project.godot)"
+msgstr ""
+
+#: editor/project_settings_editor.cpp editor/settings_config_dialog.cpp
+msgid "General"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Override For..."
+msgstr ""
+
+#: editor/project_settings_editor.cpp editor/settings_config_dialog.cpp
+msgid "The editor must be restarted for changes to take effect."
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Input Map"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Action:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp scene/gui/scroll_container.cpp
+msgid "Deadzone"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Device:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Index:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Localization"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Translations"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Translations:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Remaps"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Resources:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Remaps by Locale:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Locales Filter"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Show All Locales"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Show Selected Locales Only"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Filter mode:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Locales:"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "AutoLoad"
+msgstr ""
+
+#: editor/project_settings_editor.cpp platform/android/export/export_plugin.cpp
+#: platform/iphone/export/export.cpp
+msgid "Plugins"
+msgstr ""
+
+#: editor/project_settings_editor.cpp
+msgid "Import Defaults"
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Preset..."
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Zero"
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Easing In-Out"
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Easing Out-In"
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "File..."
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Dir..."
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Assign"
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Select Node"
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Error loading file: Not a resource!"
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Pick a Node"
+msgstr ""
+
+#: editor/property_editor.cpp
+msgid "Bit %d, val %d."
+msgstr ""
+
+#: editor/property_selector.cpp
+msgid "Select Property"
+msgstr ""
+
+#: editor/property_selector.cpp
+msgid "Select Virtual Method"
+msgstr ""
+
+#: editor/property_selector.cpp
+msgid "Select Method"
+msgstr ""
+
+#: editor/rename_dialog.cpp editor/scene_tree_dock.cpp
+msgid "Batch Rename"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Prefix:"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Suffix:"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Use Regular Expressions"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Advanced Options"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Substitute"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Node name"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Node's parent name, if available"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Node type"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Current scene name"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Root node name"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid ""
+"Sequential integer counter.\n"
+"Compare counter options."
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Per-level Counter"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "If set, the counter restarts for each group of child nodes."
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Initial value for the counter"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Amount by which counter is incremented for each node"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Padding"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid ""
+"Minimum number of digits for the counter.\n"
+"Missing digits are padded with leading zeros."
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Post-Process"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Style"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Keep"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "PascalCase to snake_case"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "snake_case to PascalCase"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Case"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "To Lowercase"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "To Uppercase"
+msgstr ""
+
+#: editor/rename_dialog.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Reset"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "Regular Expression Error:"
+msgstr ""
+
+#: editor/rename_dialog.cpp
+msgid "At character %s"
+msgstr ""
+
+#: editor/reparent_dialog.cpp editor/scene_tree_dock.cpp
+msgid "Reparent Node"
+msgstr ""
+
+#: editor/reparent_dialog.cpp
+msgid "Reparent Location (Select new Parent):"
+msgstr ""
+
+#: editor/reparent_dialog.cpp
+msgid "Keep Global Transform"
+msgstr ""
+
+#: editor/reparent_dialog.cpp editor/scene_tree_dock.cpp
+msgid "Reparent"
+msgstr ""
+
+#: editor/run_settings_dialog.cpp
+msgid "Run Mode:"
+msgstr ""
+
+#: editor/run_settings_dialog.cpp scene/main/scene_tree.cpp
+msgid "Current Scene"
+msgstr ""
+
+#: editor/run_settings_dialog.cpp
+msgid "Main Scene Arguments:"
+msgstr ""
+
+#: editor/run_settings_dialog.cpp
+msgid "Scene Run Settings"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "No parent to instance the scenes at."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Error loading scene from %s"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Cannot instance the scene '%s' because the current scene exists within one "
+"of its nodes."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Instance Scene(s)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Replace with Branch Scene"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Instance Child Scene"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Can't paste root node into the same scene."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Paste Node(s)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Detach Script"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "This operation can't be done on the tree root."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Move Node In Parent"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Move Nodes In Parent"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Duplicate Node(s)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Can't reparent nodes in inherited scenes, order of nodes can't change."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Node must belong to the edited scene to become root."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Instantiated scenes can't become root"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Make node as Root"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Delete %d nodes and any children?"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Delete %d nodes?"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Delete the root node \"%s\"?"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Delete node \"%s\" and its children?"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Delete node \"%s\"?"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Saving the branch as a scene requires having a scene open in the editor."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Saving the branch as a scene requires selecting only one node, but you have "
+"selected %d nodes."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Can't save the root node branch as an instanced scene.\n"
+"To create an editable copy of the current scene, duplicate it using the "
+"FileSystem dock context menu\n"
+"or create an inherited scene using Scene > New Inherited Scene... instead."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Can't save the branch of an already instanced scene.\n"
+"To create a variation of a scene, you can make an inherited scene based on "
+"the instanced scene using Scene > New Inherited Scene... instead."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Can't save a branch which is a child of an already instantiated scene.\n"
+"To save this branch into its own scene, open the original scene, right click "
+"on this branch, and select \"Save Branch as Scene\"."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Can't save a branch which is part of an inherited scene.\n"
+"To save this branch into its own scene, open the original scene, right click "
+"on this branch, and select \"Save Branch as Scene\"."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Save New Scene As..."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Disabling \"editable_instance\" will cause all properties of the node to be "
+"reverted to their default."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Enabling \"Load As Placeholder\" will disable \"Editable Children\" and "
+"cause all properties of the node to be reverted to their default."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Make Local"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Enable Scene Unique Name(s)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Disable Scene Unique Name(s)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "New Scene Root"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Create Root Node:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "2D Scene"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "3D Scene"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "User Interface"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Other Node"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Can't operate on nodes from a foreign scene!"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Can't operate on nodes the current scene inherits from!"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "This operation can't be done on instanced scenes."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Attach Script"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Cut Node(s)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Remove Node(s)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Change type of node(s)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Couldn't save new scene. Likely dependencies (instances) couldn't be "
+"satisfied."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Error saving scene."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Error duplicating scene to save it."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Sub-Resources"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Access as Scene Unique Name"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Clear Inheritance"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Editable Children"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Load As Placeholder"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Cannot attach a script: there are no languages registered.\n"
+"This is probably because this editor was built with all language modules "
+"disabled."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Add Child Node"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Expand/Collapse All"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Change Type"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Reparent to New Node"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Make Scene Root"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Merge From Scene"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp editor/script_editor_debugger.cpp
+msgid "Save Branch as Scene"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp editor/script_editor_debugger.cpp
+msgid "Copy Node Path"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Delete (No Confirm)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Add/Create a New Node."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"Instance a scene file as a Node. Creates an inherited scene if no root node "
+"exists."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Attach a new or existing script to the selected node."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Detach the script from the selected node."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Remote"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid ""
+"If selected, the Remote scene tree dock will cause the project to stutter "
+"every time it updates.\n"
+"Switch back to the Local scene tree dock to improve performance."
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Clear Inheritance? (No Undo!)"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Show Scene Tree Root Selection"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Derive Script Globals By Name"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
+msgid "Use Favorites Root Selection"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Toggle Visible"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Unlock Node"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Button Group"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "(Connecting From)"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Node configuration warning:"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid ""
+"This node can be accessed from within anywhere in the scene by preceding it "
+"with the '%s' prefix in a node path.\n"
+"Click to disable this."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid ""
+"Node has %s connection(s) and %s group(s).\n"
+"Click to show signals dock."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid ""
+"Node has %s connection(s).\n"
+"Click to show signals dock."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid ""
+"Node is in %s group(s).\n"
+"Click to show groups dock."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Open Script:"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid ""
+"Node is locked.\n"
+"Click to unlock it."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid ""
+"Children are not selectable.\n"
+"Click to make selectable."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Toggle Visibility"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid ""
+"AnimationPlayer is pinned.\n"
+"Click to unpin."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Invalid node name, the following characters are not allowed:"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Rename Node"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Scene Tree (Nodes):"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Node Configuration Warning!"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
+msgid "Select a Node"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Path is empty."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Filename is empty."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Path is not local."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Invalid base path."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "A directory with the same name exists."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "File does not exist."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Invalid extension."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Wrong extension chosen."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Error loading template '%s'"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Error - Could not create script in filesystem."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Error loading script from %s"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Overrides"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "N/A"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Open Script / Choose Location"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Open Script"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "File exists, it will be reused."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Invalid path."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Invalid class name."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Invalid inherited parent name or path."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Script path/name is valid."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Allowed: a-z, A-Z, 0-9, _ and ."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Built-in script (into scene file)."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Will create a new script file."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Will load an existing script file."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Script file already exists."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid ""
+"Note: Built-in scripts have some limitations and can't be edited using an "
+"external editor."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid ""
+"Warning: Having the script name be the same as a built-in type is usually "
+"not desired."
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Class Name:"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Template:"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Built-in Script:"
+msgstr ""
+
+#: editor/script_create_dialog.cpp
+msgid "Attach Node Script"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Remote %s:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Bytes:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Warning:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Error:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "C++ Error"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "C++ Error:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "C++ Source"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Source:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "C++ Source:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Stack Trace"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Errors"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Child process connected."
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Copy Error"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Open C++ Source on GitHub"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Video RAM"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Skip Breakpoints"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Inspect Previous Instance"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Inspect Next Instance"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Stack Frames"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Filter stack variables"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Auto Switch To Remote Scene Tree"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Remote Scene Tree Refresh Interval"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Remote Inspect Refresh Interval"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Network Profiler"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Monitor"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Monitors"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Pick one or more items from the list to display the graph."
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "List of Video Memory Usage by Resource:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Total:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Export list to a CSV file"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Resource Path"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp scene/resources/audio_stream_sample.cpp
+#: servers/audio/effects/audio_effect_record.cpp
+msgid "Format"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp scene/main/viewport.cpp
+msgid "Usage"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp servers/visual_server.cpp
+msgid "Misc"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Clicked Control:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Clicked Control Type:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Live Edit Root:"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Set From Tree"
+msgstr ""
+
+#: editor/script_editor_debugger.cpp
+msgid "Export measures as CSV"
+msgstr ""
+
+#: editor/settings_config_dialog.cpp
+msgid "Erase Shortcut"
+msgstr ""
+
+#: editor/settings_config_dialog.cpp
+msgid "Restore Shortcut"
+msgstr ""
+
+#: editor/settings_config_dialog.cpp
+msgid "Change Shortcut"
+msgstr ""
+
+#: editor/settings_config_dialog.cpp
+msgid "Editor Settings"
+msgstr ""
+
+#: editor/settings_config_dialog.cpp
+msgid "Shortcuts"
+msgstr ""
+
+#: editor/settings_config_dialog.cpp
+msgid "Binding"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Light Radius"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Stream Player 3D"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change AudioStreamPlayer3D Emission Angle"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp modules/gltf/gltf_node.cpp
+#: platform/osx/export/export.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Camera"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Camera FOV"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Camera Size"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Visibility Notifier"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Notifier AABB"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Particles AABB"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Reflection Probe"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Probe Extents"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "GI Probe"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Baked Indirect Light"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
+msgid "Change Sphere Shape Radius"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
+msgid "Change Box Shape Extents"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Capsule Shape Radius"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Capsule Shape Height"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Cylinder Shape Radius"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Cylinder Shape Height"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Change Ray Shape Length"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Navigation Edge"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Navigation Edge Disabled"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Navigation Solid"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Navigation Solid Disabled"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Joint Body A"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Joint Body B"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Room Edge"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Room Overlap"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Set Room Point Position"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp scene/3d/portal.cpp
+msgid "Portal Margin"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Portal Edge"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Portal Arrow"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Set Portal Point Position"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Portal Front"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Portal Back"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp scene/2d/light_occluder_2d.cpp
+#: scene/2d/tile_map.cpp
+msgid "Occluder"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Set Occluder Sphere Radius"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Set Occluder Sphere Position"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Set Occluder Polygon Point Position"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Set Occluder Hole Point Position"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Occluder Polygon Front"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Occluder Polygon Back"
+msgstr ""
+
+#: editor/spatial_editor_gizmos.cpp
+msgid "Occluder Hole"
+msgstr ""
+
+#: main/main.cpp
+msgid "Godot Physics"
+msgstr ""
+
+#: main/main.cpp servers/physics_2d/physics_2d_server_sw.cpp
+#: servers/visual/visual_server_scene.cpp
+msgid "Use BVH"
+msgstr ""
+
+#: main/main.cpp servers/physics_2d/physics_2d_server_sw.cpp
+#: servers/visual/visual_server_scene.cpp
+msgid "BVH Collision Margin"
+msgstr ""
+
+#: main/main.cpp
+msgid "Crash Handler"
+msgstr ""
+
+#: main/main.cpp
+msgid "Multithreaded Server"
+msgstr ""
+
+#: main/main.cpp
+msgid "RID Pool Prealloc"
+msgstr ""
+
+#: main/main.cpp
+msgid "Debugger stdout"
+msgstr ""
+
+#: main/main.cpp
+msgid "Max Chars Per Second"
+msgstr ""
+
+#: main/main.cpp
+msgid "Max Messages Per Frame"
+msgstr ""
+
+#: main/main.cpp
+msgid "Max Errors Per Second"
+msgstr ""
+
+#: main/main.cpp
+msgid "Max Warnings Per Second"
+msgstr ""
+
+#: main/main.cpp
+msgid "Flush stdout On Print"
+msgstr ""
+
+#: main/main.cpp servers/visual_server.cpp
+msgid "Logging"
+msgstr ""
+
+#: main/main.cpp
+msgid "File Logging"
+msgstr ""
+
+#: main/main.cpp
+msgid "Enable File Logging"
+msgstr ""
+
+#: main/main.cpp
+msgid "Log Path"
+msgstr ""
+
+#: main/main.cpp
+msgid "Max Log Files"
+msgstr ""
+
+#: main/main.cpp
+msgid "Driver"
+msgstr ""
+
+#: main/main.cpp
+msgid "Driver Name"
+msgstr ""
+
+#: main/main.cpp
+msgid "Fallback To GLES2"
+msgstr ""
+
+#: main/main.cpp
+msgid "Use Nvidia Rect Flicker Workaround"
+msgstr ""
+
+#: main/main.cpp
+msgid "DPI"
+msgstr ""
+
+#: main/main.cpp
+msgid "Allow hiDPI"
+msgstr ""
+
+#: main/main.cpp
+msgid "V-Sync"
+msgstr ""
+
+#: main/main.cpp
+msgid "Use V-Sync"
+msgstr ""
+
+#: main/main.cpp
+msgid "Per Pixel Transparency"
+msgstr ""
+
+#: main/main.cpp
+msgid "Allowed"
+msgstr ""
+
+#: main/main.cpp
+msgid "Intended Usage"
+msgstr ""
+
+#: main/main.cpp
+msgid "Framebuffer Allocation"
+msgstr ""
+
+#: main/main.cpp platform/uwp/os_uwp.cpp
+msgid "Energy Saving"
+msgstr ""
+
+#: main/main.cpp
+msgid "Threads"
+msgstr ""
+
+#: main/main.cpp servers/physics_2d/physics_2d_server_wrap_mt.h
+msgid "Thread Model"
+msgstr ""
+
+#: main/main.cpp
+msgid "Thread Safe BVH"
+msgstr ""
+
+#: main/main.cpp
+msgid "Handheld"
+msgstr ""
+
+#: main/main.cpp platform/javascript/export/export.cpp
+#: platform/uwp/export/export.cpp
+msgid "Orientation"
+msgstr ""
+
+#: main/main.cpp scene/gui/scroll_container.cpp scene/gui/text_edit.cpp
+#: scene/main/scene_tree.cpp scene/register_scene_types.cpp
+msgid "Common"
+msgstr ""
+
+#: main/main.cpp
+msgid "Physics FPS"
+msgstr ""
+
+#: main/main.cpp
+msgid "Force FPS"
+msgstr ""
+
+#: main/main.cpp
+msgid "Enable Pause Aware Picking"
+msgstr ""
+
+#: main/main.cpp scene/gui/item_list.cpp scene/gui/popup_menu.cpp
+#: scene/gui/scroll_container.cpp scene/gui/text_edit.cpp scene/gui/tree.cpp
+#: scene/main/viewport.cpp scene/register_scene_types.cpp
+msgid "GUI"
+msgstr ""
+
+#: main/main.cpp
+msgid "Drop Mouse On GUI Input Disabled"
+msgstr ""
+
+#: main/main.cpp
+msgid "stdout"
+msgstr ""
+
+#: main/main.cpp
+msgid "Print FPS"
+msgstr ""
+
+#: main/main.cpp
+msgid "Verbose stdout"
+msgstr ""
+
+#: main/main.cpp scene/main/scene_tree.cpp scene/resources/multimesh.cpp
+msgid "Physics Interpolation"
+msgstr ""
+
+#: main/main.cpp
+msgid "Enable Warnings"
+msgstr ""
+
+#: main/main.cpp
+msgid "Frame Delay Msec"
+msgstr ""
+
+#: main/main.cpp
+msgid "Low Processor Mode"
+msgstr ""
+
+#: main/main.cpp
+msgid "Delta Sync After Draw"
+msgstr ""
+
+#: main/main.cpp
+msgid "iOS"
+msgstr ""
+
+#: main/main.cpp
+msgid "Hide Home Indicator"
+msgstr ""
+
+#: main/main.cpp
+msgid "Input Devices"
+msgstr ""
+
+#: main/main.cpp
+msgid "Pointing"
+msgstr ""
+
+#: main/main.cpp
+msgid "Touch Delay"
+msgstr ""
+
+#: main/main.cpp servers/visual_server.cpp
+msgid "GLES3"
+msgstr ""
+
+#: main/main.cpp servers/visual_server.cpp
+msgid "Shaders"
+msgstr ""
+
+#: main/main.cpp
+msgid "Debug Shader Fallbacks"
+msgstr ""
+
+#: main/main.cpp scene/3d/baked_lightmap.cpp scene/3d/camera.cpp
+#: scene/3d/world_environment.cpp scene/main/scene_tree.cpp
+#: scene/resources/world.cpp
+msgid "Environment"
+msgstr ""
+
+#: main/main.cpp
+msgid "Default Clear Color"
+msgstr ""
+
+#: main/main.cpp
+msgid "Boot Splash"
+msgstr ""
+
+#: main/main.cpp
+msgid "Show Image"
+msgstr ""
+
+#: main/main.cpp
+msgid "Image"
+msgstr ""
+
+#: main/main.cpp
+msgid "Fullsize"
+msgstr ""
+
+#: main/main.cpp scene/resources/dynamic_font.cpp
+msgid "Use Filter"
+msgstr ""
+
+#: main/main.cpp scene/resources/style_box.cpp
+msgid "BG Color"
+msgstr ""
+
+#: main/main.cpp
+msgid "macOS Native Icon"
+msgstr ""
+
+#: main/main.cpp
+msgid "Windows Native Icon"
+msgstr ""
+
+#: main/main.cpp
+msgid "Buffering"
+msgstr ""
+
+#: main/main.cpp
+msgid "Agile Event Flushing"
+msgstr ""
+
+#: main/main.cpp
+msgid "Emulate Touch From Mouse"
+msgstr ""
+
+#: main/main.cpp
+msgid "Emulate Mouse From Touch"
+msgstr ""
+
+#: main/main.cpp
+msgid "Mouse Cursor"
+msgstr ""
+
+#: main/main.cpp
+msgid "Custom Image"
+msgstr ""
+
+#: main/main.cpp
+msgid "Custom Image Hotspot"
+msgstr ""
+
+#: main/main.cpp
+msgid "Tooltip Position Offset"
+msgstr ""
+
+#: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
+msgid "Debugger Agent"
+msgstr ""
+
+#: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
+msgid "Wait For Debugger"
+msgstr ""
+
+#: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
+msgid "Wait Timeout"
+msgstr ""
+
+#: main/main.cpp
+msgid "Runtime"
+msgstr ""
+
+#: main/main.cpp
+msgid "Unhandled Exception Policy"
+msgstr ""
+
+#: main/main.cpp
+msgid "Main Loop Type"
+msgstr ""
+
+#: main/main.cpp scene/gui/texture_progress.cpp
+#: scene/gui/viewport_container.cpp
+msgid "Stretch"
+msgstr ""
+
+#: main/main.cpp
+msgid "Aspect"
+msgstr ""
+
+#: main/main.cpp
+msgid "Shrink"
+msgstr ""
+
+#: main/main.cpp scene/main/scene_tree.cpp
+msgid "Auto Accept Quit"
+msgstr ""
+
+#: main/main.cpp scene/main/scene_tree.cpp
+msgid "Quit On Go Back"
+msgstr ""
+
+#: main/main.cpp scene/main/viewport.cpp
+msgid "Snap Controls To Pixels"
+msgstr ""
+
+#: main/main.cpp
+msgid "Dynamic Fonts"
+msgstr ""
+
+#: main/main.cpp
+msgid "Use Oversampling"
+msgstr ""
+
+#: modules/bullet/register_types.cpp modules/bullet/space_bullet.cpp
+msgid "Active Soft World"
+msgstr ""
+
+#: modules/csg/csg_gizmos.cpp
+msgid "CSG"
+msgstr ""
+
+#: modules/csg/csg_gizmos.cpp
+msgid "Change Cylinder Radius"
+msgstr ""
+
+#: modules/csg/csg_gizmos.cpp
+msgid "Change Cylinder Height"
+msgstr ""
+
+#: modules/csg/csg_gizmos.cpp
+msgid "Change Torus Inner Radius"
+msgstr ""
+
+#: modules/csg/csg_gizmos.cpp
+msgid "Change Torus Outer Radius"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Operation"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Calculate Tangents"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Use Collision"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp servers/physics_2d_server.cpp
+msgid "Collision Layer"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp scene/2d/ray_cast_2d.cpp scene/3d/camera.cpp
+#: scene/3d/ray_cast.cpp scene/3d/spring_arm.cpp
+#: scene/resources/navigation_mesh.cpp servers/physics_server.cpp
+msgid "Collision Mask"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Invert Faces"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp scene/2d/navigation_agent_2d.cpp
+#: scene/2d/navigation_obstacle_2d.cpp scene/3d/navigation_agent.cpp
+#: scene/3d/navigation_obstacle.cpp scene/3d/vehicle_body.cpp
+#: scene/animation/root_motion_view.cpp scene/resources/capsule_shape.cpp
+#: scene/resources/capsule_shape_2d.cpp scene/resources/circle_shape_2d.cpp
+#: scene/resources/cylinder_shape.cpp scene/resources/environment.cpp
+#: scene/resources/navigation_mesh.cpp scene/resources/primitive_meshes.cpp
+#: scene/resources/sphere_shape.cpp
+msgid "Radius"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp scene/resources/primitive_meshes.cpp
+msgid "Radial Segments"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp scene/resources/primitive_meshes.cpp
+msgid "Rings"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Smooth Faces"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Sides"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Cone"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Inner Radius"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Outer Radius"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Ring Sides"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp scene/2d/collision_polygon_2d.cpp
+#: scene/2d/light_occluder_2d.cpp scene/2d/polygon_2d.cpp
+#: scene/3d/collision_polygon.cpp
+msgid "Polygon"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Spin Degrees"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Spin Sides"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path Node"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path Interval Type"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path Interval"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path Simplify Angle"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path Rotation"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path Local"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path Continuous U"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path U Distance"
+msgstr ""
+
+#: modules/csg/csg_shape.cpp
+msgid "Path Joined"
+msgstr ""
+
+#: modules/enet/networked_multiplayer_enet.cpp
+msgid "Compression Mode"
+msgstr ""
+
+#: modules/enet/networked_multiplayer_enet.cpp
+msgid "Transfer Channel"
+msgstr ""
+
+#: modules/enet/networked_multiplayer_enet.cpp
+msgid "Channel Count"
+msgstr ""
+
+#: modules/enet/networked_multiplayer_enet.cpp
+msgid "Always Ordered"
+msgstr ""
+
+#: modules/enet/networked_multiplayer_enet.cpp
+msgid "Server Relay"
+msgstr ""
+
+#: modules/enet/networked_multiplayer_enet.cpp
+msgid "DTLS Verify"
+msgstr ""
+
+#: modules/enet/networked_multiplayer_enet.cpp
+msgid "DTLS Hostname"
+msgstr ""
+
+#: modules/enet/networked_multiplayer_enet.cpp
+msgid "Use DTLS"
+msgstr ""
+
+#: modules/fbx/editor_scene_importer_fbx.cpp
+msgid "FBX"
+msgstr ""
+
+#: modules/fbx/editor_scene_importer_fbx.cpp
+msgid "Use FBX"
+msgstr ""
+
+#: modules/gdnative/gdnative.cpp
+msgid "Config File"
+msgstr ""
+
+#: modules/gdnative/gdnative.cpp
+msgid "Load Once"
+msgstr ""
+
+#: modules/gdnative/gdnative.cpp
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Singleton"
+msgstr ""
+
+#: modules/gdnative/gdnative.cpp
+msgid "Symbol Prefix"
+msgstr ""
+
+#: modules/gdnative/gdnative.cpp
+msgid "Reloadable"
+msgstr ""
+
+#: modules/gdnative/gdnative.cpp
+#: modules/gdnative/gdnative_library_singleton_editor.cpp
+#: modules/gdnative/nativescript/nativescript.cpp
+msgid "Library"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Select the dynamic library for this entry"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Select dependencies of the library for this entry"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Remove current entry"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Double click to create a new entry"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Platform:"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Platform"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Dynamic Library"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "Add an architecture entry"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_editor_plugin.cpp
+msgid "GDNativeLibrary"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_singleton_editor.cpp
+msgid "Enabled GDNative Singleton"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_singleton_editor.cpp
+msgid "Disabled GDNative Singleton"
+msgstr ""
+
+#: modules/gdnative/gdnative_library_singleton_editor.cpp
+msgid "Libraries:"
+msgstr ""
+
+#: modules/gdnative/nativescript/nativescript.cpp
+msgid "Class Name"
+msgstr ""
+
+#: modules/gdnative/nativescript/nativescript.cpp
+msgid "Script Class"
+msgstr ""
+
+#: modules/gdnative/nativescript/nativescript.cpp
+msgid "Icon Path"
+msgstr ""
+
+#: modules/gdnative/register_types.cpp
+msgid "GDNative"
+msgstr ""
+
+#: modules/gdscript/editor/gdscript_highlighter.cpp
+#: modules/gdscript/gdscript.cpp
+msgid "GDScript"
+msgstr ""
+
+#: modules/gdscript/editor/gdscript_highlighter.cpp
+msgid "Function Definition Color"
+msgstr ""
+
+#: modules/gdscript/editor/gdscript_highlighter.cpp
+msgid "Node Path Color"
+msgstr ""
+
+#: modules/gdscript/gdscript.cpp modules/visual_script/visual_script.cpp
+msgid "Max Call Stack"
+msgstr ""
+
+#: modules/gdscript/gdscript.cpp
+msgid "Treat Warnings As Errors"
+msgstr ""
+
+#: modules/gdscript/gdscript.cpp
+msgid "Exclude Addons"
+msgstr ""
+
+#: modules/gdscript/gdscript.cpp
+msgid "Autocomplete Setters And Getters"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Step argument is zero!"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Not a script with an instance"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Not based on a script"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Not based on a resource file"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Invalid instance dictionary format (missing @path)"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Invalid instance dictionary format (can't load script at @path)"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Invalid instance dictionary format (invalid script at @path)"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Invalid instance dictionary (invalid subclasses)"
+msgstr ""
+
+#: modules/gdscript/gdscript_functions.cpp
+msgid "Object can't provide a length."
+msgstr ""
+
+#: modules/gdscript/language_server/gdscript_language_server.cpp
+msgid "Language Server"
+msgstr ""
+
+#: modules/gdscript/language_server/gdscript_language_server.cpp
+msgid "Enable Smart Resolve"
+msgstr ""
+
+#: modules/gdscript/language_server/gdscript_language_server.cpp
+msgid "Show Native Symbols In Editor"
+msgstr ""
+
+#: modules/gdscript/language_server/gdscript_language_server.cpp
+msgid "Use Thread"
+msgstr ""
+
+#: modules/gltf/editor_scene_exporter_gltf_plugin.cpp
+msgid "Export Mesh GLTF2"
+msgstr ""
+
+#: modules/gltf/editor_scene_exporter_gltf_plugin.cpp
+msgid "Export GLTF..."
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Buffer View"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp modules/gltf/gltf_buffer_view.cpp
+msgid "Byte Offset"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Component Type"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Normalized"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Count"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp scene/resources/visual_shader_nodes.cpp
+msgid "Min"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp scene/resources/visual_shader_nodes.cpp
+msgid "Max"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Sparse Count"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Sparse Indices Buffer View"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Sparse Indices Byte Offset"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Sparse Indices Component Type"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Sparse Values Buffer View"
+msgstr ""
+
+#: modules/gltf/gltf_accessor.cpp
+msgid "Sparse Values Byte Offset"
+msgstr ""
+
+#: modules/gltf/gltf_buffer_view.cpp
+msgid "Buffer"
+msgstr ""
+
+#: modules/gltf/gltf_buffer_view.cpp
+msgid "Byte Length"
+msgstr ""
+
+#: modules/gltf/gltf_buffer_view.cpp
+msgid "Byte Stride"
+msgstr ""
+
+#: modules/gltf/gltf_buffer_view.cpp
+msgid "Indices"
+msgstr ""
+
+#: modules/gltf/gltf_camera.cpp
+msgid "FOV Size"
+msgstr ""
+
+#: modules/gltf/gltf_camera.cpp
+msgid "Zfar"
+msgstr ""
+
+#: modules/gltf/gltf_camera.cpp
+msgid "Znear"
+msgstr ""
+
+#: modules/gltf/gltf_light.cpp scene/2d/canvas_modulate.cpp
+#: scene/2d/cpu_particles_2d.cpp scene/2d/light_2d.cpp scene/2d/polygon_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/light.cpp
+#: scene/animation/root_motion_view.cpp scene/gui/color_picker.cpp
+#: scene/gui/color_rect.cpp scene/gui/rich_text_effect.cpp
+#: scene/resources/environment.cpp scene/resources/material.cpp
+#: scene/resources/particles_material.cpp scene/resources/sky.cpp
+#: scene/resources/style_box.cpp
+msgid "Color"
+msgstr ""
+
+#: modules/gltf/gltf_light.cpp scene/3d/reflection_probe.cpp
+#: scene/resources/environment.cpp
+msgid "Intensity"
+msgstr ""
+
+#: modules/gltf/gltf_light.cpp scene/2d/light_2d.cpp scene/3d/light.cpp
+msgid "Range"
+msgstr ""
+
+#: modules/gltf/gltf_light.cpp
+msgid "Inner Cone Angle"
+msgstr ""
+
+#: modules/gltf/gltf_light.cpp
+msgid "Outer Cone Angle"
+msgstr ""
+
+#: modules/gltf/gltf_mesh.cpp
+msgid "Blend Weights"
+msgstr ""
+
+#: modules/gltf/gltf_mesh.cpp
+msgid "Instance Materials"
+msgstr ""
+
+#: modules/gltf/gltf_node.cpp scene/3d/skeleton.cpp
+msgid "Parent"
+msgstr ""
+
+#: modules/gltf/gltf_node.cpp
+msgid "Xform"
+msgstr ""
+
+#: modules/gltf/gltf_node.cpp scene/3d/mesh_instance.cpp
+msgid "Skin"
+msgstr ""
+
+#: modules/gltf/gltf_node.cpp scene/3d/spatial.cpp
+msgid "Translation"
+msgstr ""
+
+#: modules/gltf/gltf_node.cpp
+msgid "Children"
+msgstr ""
+
+#: modules/gltf/gltf_skeleton.cpp modules/gltf/gltf_skin.cpp
+msgid "Joints"
+msgstr ""
+
+#: modules/gltf/gltf_skeleton.cpp modules/gltf/gltf_skin.cpp
+msgid "Roots"
+msgstr ""
+
+#: modules/gltf/gltf_skeleton.cpp modules/gltf/gltf_state.cpp
+msgid "Unique Names"
+msgstr ""
+
+#: modules/gltf/gltf_skeleton.cpp
+msgid "Godot Bone Node"
+msgstr ""
+
+#: modules/gltf/gltf_skin.cpp
+msgid "Skin Root"
+msgstr ""
+
+#: modules/gltf/gltf_skin.cpp
+msgid "Joints Original"
+msgstr ""
+
+#: modules/gltf/gltf_skin.cpp
+msgid "Inverse Binds"
+msgstr ""
+
+#: modules/gltf/gltf_skin.cpp
+msgid "Non Joints"
+msgstr ""
+
+#: modules/gltf/gltf_skin.cpp
+msgid "Joint I To Bone I"
+msgstr ""
+
+#: modules/gltf/gltf_skin.cpp
+msgid "Joint I To Name"
+msgstr ""
+
+#: modules/gltf/gltf_skin.cpp
+msgid "Godot Skin"
+msgstr ""
+
+#: modules/gltf/gltf_spec_gloss.cpp
+msgid "Diffuse Img"
+msgstr ""
+
+#: modules/gltf/gltf_spec_gloss.cpp
+msgid "Diffuse Factor"
+msgstr ""
+
+#: modules/gltf/gltf_spec_gloss.cpp
+msgid "Gloss Factor"
+msgstr ""
+
+#: modules/gltf/gltf_spec_gloss.cpp
+msgid "Specular Factor"
+msgstr ""
+
+#: modules/gltf/gltf_spec_gloss.cpp
+msgid "Spec Gloss Img"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Json"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Major Version"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Minor Version"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "GLB Data"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Use Named Skin Binds"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Buffer Views"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Accessors"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Scene Name"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Root Nodes"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp scene/2d/particles_2d.cpp
+#: scene/gui/texture_button.cpp scene/gui/texture_progress.cpp
+msgid "Textures"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp platform/uwp/export/export.cpp
+msgid "Images"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Cameras"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp servers/visual_server.cpp
+msgid "Lights"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Unique Animation Names"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Skeletons"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Skeleton To Node"
+msgstr ""
+
+#: modules/gltf/gltf_state.cpp
+msgid "Animations"
+msgstr ""
+
+#: modules/gltf/gltf_texture.cpp
+msgid "Src Image"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp
+msgid "Mesh Library"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp
+msgid "Physics Material"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp scene/3d/visual_instance.cpp
+msgid "Use In Baked Light"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp scene/2d/tile_map.cpp
+msgid "Cell"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp
+msgid "Octant Size"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp
+msgid "Center X"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp
+msgid "Center Y"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp
+msgid "Center Z"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp scene/2d/collision_object_2d.cpp
+#: scene/2d/tile_map.cpp scene/3d/collision_object.cpp scene/3d/soft_body.cpp
+#: scene/resources/material.cpp
+msgid "Mask"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp scene/2d/tile_map.cpp
+msgid "Bake Navigation"
+msgstr ""
+
+#: modules/gridmap/grid_map.cpp scene/2d/navigation_2d.cpp
+#: scene/2d/navigation_agent_2d.cpp scene/2d/navigation_polygon.cpp
+#: scene/2d/tile_map.cpp scene/3d/navigation.cpp scene/3d/navigation_agent.cpp
+#: scene/3d/navigation_mesh_instance.cpp
+msgid "Navigation Layers"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Next Plane"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Previous Plane"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Plane:"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Next Floor"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Previous Floor"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Floor:"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "GridMap Delete Selection"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "GridMap Fill Selection"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "GridMap Paste Selection"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "GridMap Paint"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "GridMap Selection"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Snap View"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Clip Disabled"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Clip Above"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Clip Below"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Edit X Axis"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Edit Y Axis"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Edit Z Axis"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Cursor Rotate X"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Cursor Rotate Y"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Cursor Rotate Z"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Cursor Back Rotate X"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Cursor Back Rotate Y"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Cursor Back Rotate Z"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Cursor Clear Rotation"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Paste Selects"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Clear Selection"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Fill Selection"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "GridMap Settings"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Pick Distance:"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Filter meshes"
+msgstr ""
+
+#: modules/gridmap/grid_map_editor_plugin.cpp
+msgid "Give a MeshLibrary resource to this GridMap to use its meshes."
+msgstr ""
+
+#: modules/lightmapper_cpu/lightmapper_cpu.cpp
+msgid "Begin Bake"
+msgstr ""
+
+#: modules/lightmapper_cpu/lightmapper_cpu.cpp
+msgid "Preparing data structures"
+msgstr ""
+
+#: modules/lightmapper_cpu/lightmapper_cpu.cpp
+msgid "Generate buffers"
+msgstr ""
+
+#: modules/lightmapper_cpu/lightmapper_cpu.cpp
+msgid "Direct lighting"
+msgstr ""
+
+#: modules/lightmapper_cpu/lightmapper_cpu.cpp
+msgid "Indirect lighting"
+msgstr ""
+
+#: modules/lightmapper_cpu/lightmapper_cpu.cpp
+msgid "Post processing"
+msgstr ""
+
+#: modules/lightmapper_cpu/lightmapper_cpu.cpp
+msgid "Plotting lightmaps"
+msgstr ""
+
+#: modules/lightmapper_cpu/register_types.cpp
+msgid "CPU Lightmapper"
+msgstr ""
+
+#: modules/lightmapper_cpu/register_types.cpp
+msgid "Low Quality Ray Count"
+msgstr ""
+
+#: modules/lightmapper_cpu/register_types.cpp
+msgid "Medium Quality Ray Count"
+msgstr ""
+
+#: modules/lightmapper_cpu/register_types.cpp
+msgid "High Quality Ray Count"
+msgstr ""
+
+#: modules/lightmapper_cpu/register_types.cpp
+msgid "Ultra Quality Ray Count"
+msgstr ""
+
+#: modules/minimp3/audio_stream_mp3.cpp
+#: modules/minimp3/resource_importer_mp3.cpp
+#: modules/stb_vorbis/audio_stream_ogg_vorbis.cpp
+#: modules/stb_vorbis/resource_importer_ogg_vorbis.cpp
+msgid "Loop Offset"
+msgstr ""
+
+#: modules/mobile_vr/mobile_vr_interface.cpp
+msgid "Eye Height"
+msgstr ""
+
+#: modules/mobile_vr/mobile_vr_interface.cpp
+msgid "IOD"
+msgstr ""
+
+#: modules/mobile_vr/mobile_vr_interface.cpp
+msgid "Display Width"
+msgstr ""
+
+#: modules/mobile_vr/mobile_vr_interface.cpp
+msgid "Display To Lens"
+msgstr ""
+
+#: modules/mobile_vr/mobile_vr_interface.cpp
+msgid "Oversample"
+msgstr ""
+
+#: modules/mobile_vr/mobile_vr_interface.cpp
+msgid "K1"
+msgstr ""
+
+#: modules/mobile_vr/mobile_vr_interface.cpp
+msgid "K2"
+msgstr ""
+
+#: modules/mono/csharp_script.cpp
+msgid "Class name can't be a reserved keyword"
+msgstr ""
+
+#: modules/mono/csharp_script.cpp
+msgid "Build Solution"
+msgstr ""
+
+#: modules/mono/editor/csharp_project.cpp
+msgid "Auto Update Project"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
+#: modules/mono/mono_gd/gd_mono_utils.cpp
+msgid "End of inner exception stack trace"
+msgstr ""
+
+#: modules/navigation/navigation_mesh_editor_plugin.cpp
+#: scene/3d/navigation_mesh_instance.cpp
+msgid "A NavigationMesh resource must be set or created for this node to work."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_editor_plugin.cpp
+msgid "Bake NavMesh"
+msgstr ""
+
+#: modules/navigation/navigation_mesh_editor_plugin.cpp
+msgid "Clear the navigation mesh."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Setting up Configuration..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Calculating grid size..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Creating heightfield..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Marking walkable triangles..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Constructing compact heightfield..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Eroding walkable area..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Partitioning..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Creating contours..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Creating polymesh..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Converting to native navigation mesh..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Navigation Mesh Generator Setup:"
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Parsing Geometry..."
+msgstr ""
+
+#: modules/navigation/navigation_mesh_generator.cpp
+msgid "Done!"
+msgstr ""
+
+#: modules/opensimplex/noise_texture.cpp
+msgid "Seamless"
+msgstr ""
+
+#: modules/opensimplex/noise_texture.cpp
+msgid "As Normal Map"
+msgstr ""
+
+#: modules/opensimplex/noise_texture.cpp
+msgid "Bump Strength"
+msgstr ""
+
+#: modules/opensimplex/noise_texture.cpp
+msgid "Noise"
+msgstr ""
+
+#: modules/opensimplex/noise_texture.cpp
+msgid "Noise Offset"
+msgstr ""
+
+#: modules/opensimplex/open_simplex_noise.cpp
+msgid "Octaves"
+msgstr ""
+
+#: modules/opensimplex/open_simplex_noise.cpp
+msgid "Period"
+msgstr ""
+
+#: modules/opensimplex/open_simplex_noise.cpp
+msgid "Persistence"
+msgstr ""
+
+#: modules/opensimplex/open_simplex_noise.cpp
+msgid "Lacunarity"
+msgstr ""
+
+#: modules/regex/regex.cpp
+msgid "Subject"
+msgstr ""
+
+#: modules/regex/regex.cpp
+msgid "Names"
+msgstr ""
+
+#: modules/regex/regex.cpp
+msgid "Strings"
+msgstr ""
+
+#: modules/upnp/upnp.cpp
+msgid "Discover Multicast If"
+msgstr ""
+
+#: modules/upnp/upnp.cpp
+msgid "Discover Local Port"
+msgstr ""
+
+#: modules/upnp/upnp.cpp
+msgid "Discover IPv6"
+msgstr ""
+
+#: modules/upnp/upnp_device.cpp
+msgid "Description URL"
+msgstr ""
+
+#: modules/upnp/upnp_device.cpp
+msgid "Service Type"
+msgstr ""
+
+#: modules/upnp/upnp_device.cpp
+msgid "IGD Control URL"
+msgstr ""
+
+#: modules/upnp/upnp_device.cpp
+msgid "IGD Service Type"
+msgstr ""
+
+#: modules/upnp/upnp_device.cpp
+msgid "IGD Our Addr"
+msgstr ""
+
+#: modules/upnp/upnp_device.cpp
+msgid "IGD Status"
+msgstr ""
+
+#: modules/visual_script/visual_script.cpp
+msgid ""
+"A node yielded without working memory, please read the docs on how to yield "
+"properly!"
+msgstr ""
+
+#: modules/visual_script/visual_script.cpp
+msgid ""
+"Node yielded, but did not return a function state in the first working "
+"memory."
+msgstr ""
+
+#: modules/visual_script/visual_script.cpp
+msgid ""
+"Return value must be assigned to first element of node working memory! Fix "
+"your node please."
+msgstr ""
+
+#: modules/visual_script/visual_script.cpp
+msgid "Node returned an invalid sequence output:"
+msgstr ""
+
+#: modules/visual_script/visual_script.cpp
+msgid "Found sequence bit but not the node in the stack, report bug!"
+msgstr ""
+
+#: modules/visual_script/visual_script.cpp
+msgid "Stack overflow with stack depth:"
+msgstr ""
+
+#: modules/visual_script/visual_script.cpp
+msgid "Visual Script"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Signal Arguments"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Argument Type"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Argument name"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Set Variable Default Value"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Set Variable Type"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Input Port"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Output Port"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Port Type"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Port Name"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Override an existing built-in function."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Create a new function."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Variables:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Create a new variable."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Signals:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Create a new signal."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Name is not a valid identifier:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Name already in use by another func/var/signal:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Rename Function"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Rename Variable"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Rename Signal"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Function"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Delete input port"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Variable"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Signal"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Remove Input Port"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Remove Output Port"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Expression"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Can't copy the function node."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Paste VisualScript Nodes"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Remove VisualScript Nodes"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Duplicate VisualScript Nodes"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Hold %s to drop a Getter. Hold Shift to drop a generic signature."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Hold Ctrl to drop a Getter. Hold Shift to drop a generic signature."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Hold %s to drop a simple reference to the node."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Hold Ctrl to drop a simple reference to the node."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Hold %s to drop a Variable Setter."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Hold Ctrl to drop a Variable Setter."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Preload Node"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Node(s)"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Node(s) From Tree"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid ""
+"Can't drop properties because script '%s' is not used in this scene.\n"
+"Drop holding 'Shift' to just copy the signature."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Getter Property"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Setter Property"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Base Type"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Move Node(s)"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Remove VisualScript Node"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Connect Nodes"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Disconnect Nodes"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Connect Node Data"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Connect Node Sequence"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Script already has function '%s'"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Input Value"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Resize Comment"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Can't create function with a function node."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Can't create function of nodes from nodes of multiple functions."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Select at least one node with sequence port."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Try to only have one sequence input in selection."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Create Function"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Remove Function"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Remove Variable"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Editing Variable:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Remove Signal"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Editing Signal:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Make Tool:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Members:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Change Base Type:"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Nodes..."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Add Function..."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "function_name"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Select or create a function to edit its graph."
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Delete Selected"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Find Node Type"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Copy Nodes"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Cut Nodes"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Make Function"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Refresh Graph"
+msgstr ""
+
+#: modules/visual_script/visual_script_editor.cpp
+msgid "Edit Member"
+msgstr ""
+
+#: modules/visual_script/visual_script_expression.cpp
+#: scene/resources/visual_shader.cpp
+msgid "Expression"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Return"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Return Enabled"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Return Type"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Condition"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "if (cond) is:"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "While"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "while (cond):"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Iterator"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "for (elem) in (input):"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Input type not iterable:"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Iterator became invalid"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Iterator became invalid:"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Sequence"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "in order:"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Steps"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Switch"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "'input' is:"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Type Cast"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+msgid "Is %s?"
+msgstr ""
+
+#: modules/visual_script/visual_script_flow_control.cpp
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Base Script"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "On %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "On Self"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "Call Mode"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Basic Type"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "Node Path"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Use Default Args"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Validate"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "RPC Call Mode"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Subtract %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Multiply %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Divide %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Mod %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "ShiftLeft %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "ShiftRight %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "BitAnd %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "BitOr %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "BitXor %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Set Mode"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Assign Op"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+#: modules/visual_script/visual_script_nodes.cpp
+#: modules/visual_script/visual_script_property_selector.cpp
+msgid "Get %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Invalid index property name."
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Base object is not a Node!"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Path does not lead to Node!"
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Invalid index property name '%s' in node %s."
+msgstr ""
+
+#: modules/visual_script/visual_script_func_nodes.cpp
+msgid "Emit %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Compose Array"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp scene/resources/material.cpp
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Operator"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Invalid argument of type:"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Invalid arguments:"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "a if cond, else b"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Var Name"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "VariableGet not found in script:"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "VariableSet not found in script:"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Preload"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Get Index"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Set Index"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Global Constant"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Class Constant"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Basic Constant"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Math Constant"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Get Engine Singleton"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Get Scene Node"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Get Scene Tree"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Get Self"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "CustomNode"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Custom node has no _step() method, can't process graph."
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid ""
+"Invalid return value from _step(), must be integer (seq out), or string "
+"(error)."
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "SubCall"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp scene/gui/graph_node.cpp
+msgid "Title"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Construct %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Get Local Var"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Set Local Var"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Action %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_nodes.cpp
+msgid "Deconstruct %s"
+msgstr ""
+
+#: modules/visual_script/visual_script_property_selector.cpp
+msgid "Search VisualScript"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "Yield"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "Wait"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "Next Frame"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "Next Physics Frame"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "%s sec(s)"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp scene/main/timer.cpp
+msgid "Wait Time"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "WaitSignal"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "WaitNodeSignal"
+msgstr ""
+
+#: modules/visual_script/visual_script_yield_nodes.cpp
+msgid "WaitInstanceSignal"
+msgstr ""
+
+#: modules/webrtc/webrtc_data_channel.cpp
+msgid "Write Mode"
+msgstr ""
+
+#: modules/webrtc/webrtc_data_channel.h
+msgid "WebRTC"
+msgstr ""
+
+#: modules/webrtc/webrtc_data_channel.h
+msgid "Max Channel In Buffer (KB)"
+msgstr ""
+
+#: modules/websocket/websocket_client.cpp
+msgid "Verify SSL"
+msgstr ""
+
+#: modules/websocket/websocket_client.cpp
+msgid "Trusted SSL Certificate"
+msgstr ""
+
+#: modules/websocket/websocket_macros.h
+msgid "WebSocket Client"
+msgstr ""
+
+#: modules/websocket/websocket_macros.h
+msgid "Max In Buffer (KB)"
+msgstr ""
+
+#: modules/websocket/websocket_macros.h
+msgid "Max In Packets"
+msgstr ""
+
+#: modules/websocket/websocket_macros.h
+msgid "Max Out Buffer (KB)"
+msgstr ""
+
+#: modules/websocket/websocket_macros.h
+msgid "Max Out Packets"
+msgstr ""
+
+#: modules/websocket/websocket_macros.h
+msgid "WebSocket Server"
+msgstr ""
+
+#: modules/websocket/websocket_server.cpp
+msgid "Bind IP"
+msgstr ""
+
+#: modules/websocket/websocket_server.cpp
+msgid "Private Key"
+msgstr ""
+
+#: modules/websocket/websocket_server.cpp platform/javascript/export/export.cpp
+msgid "SSL Certificate"
+msgstr ""
+
+#: modules/websocket/websocket_server.cpp
+msgid "CA Chain"
+msgstr ""
+
+#: modules/websocket/websocket_server.cpp
+msgid "Handshake Timeout"
+msgstr ""
+
+#: modules/webxr/webxr_interface.cpp
+msgid "Session Mode"
+msgstr ""
+
+#: modules/webxr/webxr_interface.cpp
+msgid "Required Features"
+msgstr ""
+
+#: modules/webxr/webxr_interface.cpp
+msgid "Optional Features"
+msgstr ""
+
+#: modules/webxr/webxr_interface.cpp
+msgid "Requested Reference Space Types"
+msgstr ""
+
+#: modules/webxr/webxr_interface.cpp
+msgid "Reference Space Type"
+msgstr ""
+
+#: modules/webxr/webxr_interface.cpp
+msgid "Visibility State"
+msgstr ""
+
+#: modules/webxr/webxr_interface.cpp
+msgid "Bounds Geometry"
+msgstr ""
+
+#: modules/webxr/webxr_interface.cpp
+msgid "XR Standard Mapping"
+msgstr ""
+
+#: platform/android/export/export.cpp
+msgid "Android SDK Path"
+msgstr ""
+
+#: platform/android/export/export.cpp
+msgid "Debug Keystore"
+msgstr ""
+
+#: platform/android/export/export.cpp
+msgid "Debug Keystore User"
+msgstr ""
+
+#: platform/android/export/export.cpp
+msgid "Debug Keystore Pass"
+msgstr ""
+
+#: platform/android/export/export.cpp
+msgid "Force System User"
+msgstr ""
+
+#: platform/android/export/export.cpp
+msgid "Shutdown ADB On Exit"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Launcher Icons"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Main 192 X 192"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Adaptive Foreground 432 X 432"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Adaptive Background 432 X 432"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Package name is missing."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Package segments must be of non-zero length."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "The character '%s' is not allowed in Android application package names."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "A digit cannot be the first character in a package segment."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "The character '%s' cannot be the first character in a package segment."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "The package must have at least one '.' separator."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Custom Build"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Use Custom Build"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Export Format"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Min SDK"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Target SDK"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp platform/iphone/export/export.cpp
+msgid "Architectures"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Keystore"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Debug User"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
+msgid "Debug Password"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Release User"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Release Password"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "One Click Deploy"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Clear Previous Install"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Code"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
+msgid "Package"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
+msgid "Unique Name"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Signed"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Classify As Game"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Retain Data On Uninstall"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Exclude From Recents"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Graphics"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "OpenGL Debug"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "XR Features"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "XR Mode"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Hand Tracking"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Hand Tracking Frequency"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Passthrough"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Immersive Mode"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Support Small"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Support Normal"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Support Large"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Support Xlarge"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "User Data Backup"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Allow"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
+msgid "Command Line"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
+msgid "Extra Args"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "APK Expansion"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Salt"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Public Key"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Permissions"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Custom Permissions"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Select device from the list"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Running on %s"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Exporting APK..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Uninstalling..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Installing to device, please wait..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not install to device: %s"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Running on device..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not execute on device."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Android build template not installed in the project. Install it from the "
+"Project menu."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Either Debug Keystore, Debug User AND Debug Password settings must be "
+"configured OR none of them."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Debug keystore not configured in the Editor Settings nor in the preset."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Either Release Keystore, Release User AND Release Password settings must be "
+"configured OR none of them."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Release keystore incorrectly configured in the export preset."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "A valid Android SDK path is required in Editor Settings."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Invalid Android SDK path in Editor Settings."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Missing 'platform-tools' directory!"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Unable to find Android SDK platform-tools' adb command."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Please check in the Android SDK directory specified in Editor Settings."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Missing 'build-tools' directory!"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Unable to find Android SDK build-tools' apksigner command."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Invalid public key for APK expansion."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Invalid package name:"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Invalid \"GodotPaymentV3\" module included in the \"android/modules\" "
+"project setting (changed in Godot 3.2.2).\n"
+"Replace it with the first-party \"GodotGooglePlayBilling\" plugin.\n"
+"Note that the singleton was also renamed from \"GodotPayments\" to "
+"\"GodotGooglePlayBilling\"."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "\"Use Custom Build\" must be enabled to use the plugins."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"\"Hand Tracking\" is only valid when \"XR Mode\" is \"Oculus Mobile VrApi\" "
+"or \"OpenXR\"."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "\"Passthrough\" is only valid when \"XR Mode\" is \"OpenXR\"."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "\"Export AAB\" is only valid when \"Use Custom Build\" is enabled."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"\"Min SDK\" can only be overridden when \"Use Custom Build\" is enabled."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "\"Min SDK\" should be a valid integer, but got \"%s\" which is invalid."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"\"Min SDK\" cannot be lower than %d, which is the version needed by the "
+"Godot library."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"\"Target SDK\" can only be overridden when \"Use Custom Build\" is enabled."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"\"Target SDK\" should be a valid integer, but got \"%s\" which is invalid."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"\"Target SDK\" %d is higher than the default version %d. This may work, but "
+"wasn't tested and may be unstable."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "\"Target SDK\" version must be greater or equal to \"Min SDK\" version."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp platform/osx/export/export.cpp
+#: platform/windows/export/export.cpp
+msgid "Code Signing"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"'apksigner' could not be found. Please check that the command is available "
+"in the Android SDK build-tools directory. The resulting %s is unsigned."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Signing debug %s..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Signing release %s..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not find keystore, unable to export."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not start apksigner executable."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "'apksigner' returned with error #%d"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Verifying %s..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "'apksigner' verification of %s failed."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Exporting for Android"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Invalid filename! Android App Bundle requires the *.aab extension."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "APK Expansion not compatible with Android App Bundle."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Invalid filename! Android APK requires the *.apk extension."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Unsupported export format!"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Trying to build from a custom built template, but no version info for it "
+"exists. Please reinstall from the 'Project' menu."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Android build version mismatch: Template installed: %s, Godot version: %s. "
+"Please reinstall Android build template from 'Project' menu."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Unable to overwrite res://android/build/res/*.xml files with project name."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not export project files to gradle project."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not write expansion package file!"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Building Android Project (gradle)"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Building of Android project failed, check output for the error. "
+"Alternatively visit docs.godotengine.org for Android build documentation."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Moving output"
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Unable to copy and rename export file, check gradle project directory for "
+"outputs."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Package not found: \"%s\"."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Creating APK..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not find template APK to export: \"%s\"."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid ""
+"Missing libraries in the export template for the selected architectures: %s. "
+"Please build a template with all required libraries, or uncheck the missing "
+"architectures in the export preset."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Adding files..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not export project files."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Aligning APK..."
+msgstr ""
+
+#: platform/android/export/export_plugin.cpp
+msgid "Could not unzip temporary unaligned APK."
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Identifier is missing."
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "The character '%s' is not allowed in Identifier."
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Landscape Launch Screens"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 2436 X 1125"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 2208 X 1242"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPad 1024 X 768"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPad 2048 X 1536"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Portrait Launch Screens"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 640 X 960"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 640 X 1136"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 750 X 1334"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 1125 X 2436"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPad 768 X 1024"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPad 1536 X 2048"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 1242 X 2208"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "App Store Team ID"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Provisioning Profile UUID Debug"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Code Sign Identity Debug"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Export Method Debug"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Provisioning Profile UUID Release"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Code Sign Identity Release"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Export Method Release"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Targeted Device Family"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Info"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Identifier"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Signature"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Short Version"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+#: platform/windows/export/export.cpp
+msgid "Copyright"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Capabilities"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Access Wi-Fi"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Push Notifications"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "User Data"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Accessible From Files App"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Accessible From iTunes Sharing"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Privacy"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Camera Usage Description"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Microphone Usage Description"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Photolibrary Usage Description"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 120 X 120"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPhone 180 X 180"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPad 76 X 76"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPad 152 X 152"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "iPad 167 X 167"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "App Store 1024 X 1024"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Spotlight 40 X 40"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Spotlight 80 X 80"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Storyboard"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Use Launch Screen Storyboard"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Image Scale Mode"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Custom Image @2x"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Custom Image @3x"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Use Custom BG Color"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Custom BG Color"
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Export Icons"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
+#: platform/osx/export/export.cpp
+msgid "Prepare Templates"
+msgstr ""
+
+#: platform/iphone/export/export.cpp platform/osx/export/export.cpp
+msgid "Export template not found."
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "App Store Team ID not specified - cannot configure the project."
+msgstr ""
+
+#: platform/iphone/export/export.cpp
+msgid "Invalid Identifier:"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Stop HTTP Server"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Run in Browser"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Run exported HTML in the system's default browser."
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Could not open template for export: \"%s\"."
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Invalid export template: \"%s\"."
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Could not write file: \"%s\"."
+msgstr ""
+
+#: platform/javascript/export/export.cpp platform/osx/export/export.cpp
+msgid "Icon Creation"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Could not read file: \"%s\"."
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "PWA"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Variant"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Export Type"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "VRAM Texture Compression"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "For Desktop"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "For Mobile"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "HTML"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Export Icon"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Custom HTML Shell"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Head Include"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Canvas Resize Policy"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Focus Canvas On Start"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Experimental Virtual Keyboard"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Progressive Web App"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Offline Page"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Icon 144 X 144"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Icon 180 X 180"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Icon 512 X 512"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Could not read HTML shell: \"%s\"."
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Could not create HTTP server directory: %s."
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Error starting HTTP server: %d."
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Web"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "HTTP Host"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "HTTP Port"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "Use SSL"
+msgstr ""
+
+#: platform/javascript/export/export.cpp
+msgid "SSL Key"
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Can't get filesystem access."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Failed to get Info.plist hash."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Invalid Info.plist, no exe name."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Invalid Info.plist, no bundle id."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Invalid Info.plist, can't load."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Failed to create \"%s\" subfolder."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Failed to extract thin binary."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Invalid binary format."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Already signed!"
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Failed to process nested resources."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Failed to create _CodeSignature subfolder."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Failed to get CodeResources hash."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp platform/osx/export/export.cpp
+msgid "Invalid entitlements file."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Invalid executable file."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Can't resize signature load command."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Failed to create fat binary."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Unknown bundle type."
+msgstr ""
+
+#: platform/osx/export/codesign.cpp
+msgid "Unknown object type."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "App Category"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "High Res"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Location Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Address Book Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Calendar Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Photos Library Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Desktop Folder Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Documents Folder Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Downloads Folder Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Network Volumes Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Removable Volumes Usage Description"
+msgstr ""
+
+#: platform/osx/export/export.cpp platform/windows/export/export.cpp
+msgid "Codesign"
+msgstr ""
+
+#: platform/osx/export/export.cpp platform/uwp/export/export.cpp
+#: platform/windows/export/export.cpp
+msgid "Identity"
+msgstr ""
+
+#: platform/osx/export/export.cpp platform/windows/export/export.cpp
+msgid "Timestamp"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Hardened Runtime"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Replace Existing Signature"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Entitlements"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Custom File"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Allow JIT Code Execution"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Allow Unsigned Executable Memory"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Allow Dyld Environment Variables"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Disable Library Validation"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Audio Input"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Address Book"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Calendars"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Photos Library"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Apple Events"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Debugging"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "App Sandbox"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Network Server"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Network Client"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Device USB"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Device Bluetooth"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Files Downloads"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Files Pictures"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Files Music"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Files Movies"
+msgstr ""
+
+#: platform/osx/export/export.cpp platform/windows/export/export.cpp
+msgid "Custom Options"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Apple ID Name"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Apple ID Password"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Apple Team ID"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Could not open icon file \"%s\"."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Could not start xcrun executable."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization failed."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization request UUID: \"%s\""
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"The notarization process generally takes less than an hour. When the process "
+"is completed, you'll receive an email."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"You can check progress manually by opening a Terminal and running the "
+"following command:"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Run the following command to staple the notarization ticket to the exported "
+"application (optional):"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Timestamping is not compatible with ad-hoc signature, and was disabled!"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Hardened Runtime is not compatible with ad-hoc signature, and was disabled!"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Built-in CodeSign failed with error \"%s\"."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Built-in CodeSign require regex module."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Could not start codesign executable, make sure Xcode command line tools are "
+"installed."
+msgstr ""
+
+#: platform/osx/export/export.cpp platform/windows/export/export.cpp
+msgid "No identity found."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Cannot sign file %s."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Relative symlinks are not supported, exported \"%s\" might be broken!"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "DMG Creation"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Could not start hdiutil executable."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "`hdiutil create` failed - file exists."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "`hdiutil create` failed."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Creating app bundle"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Could not find template app to export: \"%s\"."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Invalid export format."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Relative symlinks are not supported on this OS, the exported project might "
+"be broken!"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Requested template binary \"%s\" not found. It might be missing from your "
+"template archive."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Making PKG"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Ad-hoc signed applications require the 'Disable Library Validation' "
+"entitlement to load dynamic libraries."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Code signing bundle"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Making DMG"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Code signing DMG"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Making ZIP"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Notarization requires the app to be archived first, select the DMG or ZIP "
+"export format instead."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Sending archive for notarization"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "ZIP Creation"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Could not open file to read from path \"%s\"."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Invalid bundle identifier:"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Warning: Built-in \"codesign\" is selected in the Editor Settings. Code "
+"signing is limited to ad-hoc signature only."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Warning: Xcode command line tools are not installed, using built-in "
+"\"codesign\". Code signing is limited to ad-hoc signature only."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization: Notarization with an ad-hoc signature is not supported."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization: Code signing is required for notarization."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization: Hardened runtime is required for notarization."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization: Timestamp runtime is required for notarization."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization: Apple ID name not specified."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Notarization: Apple ID password not specified."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Warning: Notarization is disabled. The exported project will be blocked by "
+"Gatekeeper if it's downloaded from an unknown source."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Code signing is disabled. The exported project will not run on Macs with "
+"enabled Gatekeeper and Apple Silicon powered Macs."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Hardened Runtime is not compatible with ad-hoc signature, and will be "
+"disabled!"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Timestamping is not compatible with ad-hoc signature, and will be disabled!"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Warning: Notarization is not supported from this OS. The exported project "
+"will be blocked by Gatekeeper if it's downloaded from an unknown source."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Privacy: Microphone access is enabled, but usage description is not "
+"specified."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Privacy: Camera access is enabled, but usage description is not specified."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Privacy: Location information access is enabled, but usage description is "
+"not specified."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Privacy: Address book access is enabled, but usage description is not "
+"specified."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Privacy: Calendar access is enabled, but usage description is not specified."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid ""
+"Privacy: Photo library access is enabled, but usage description is not "
+"specified."
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "macOS"
+msgstr ""
+
+#: platform/osx/export/export.cpp
+msgid "Force Builtin Codesign"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Architecture"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Display Name"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Short Name"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Publisher"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Publisher Display Name"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Product GUID"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Publisher GUID"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Signing"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Certificate"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Algorithm"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Major"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Minor"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Build"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Revision"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Landscape"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Portrait"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Landscape Flipped"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Portrait Flipped"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Store Logo"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Square 44 X 44 Logo"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Square 71 X 71 Logo"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Square 150 X 150 Logo"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Square 310 X 310 Logo"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Wide 310 X 150 Logo"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Splash Screen"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Tiles"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Show Name On Square 150 X 150"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Show Name On Wide 310 X 150"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Show Name On Square 310 X 310"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid package short name."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid package unique name."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid package publisher display name."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid product GUID."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid publisher GUID."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid background color."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid Store Logo image dimensions (should be 50x50)."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid square 44x44 logo image dimensions (should be 44x44)."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid square 71x71 logo image dimensions (should be 71x71)."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid square 150x150 logo image dimensions (should be 150x150)."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid square 310x310 logo image dimensions (should be 310x310)."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid wide 310x150 logo image dimensions (should be 310x150)."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Invalid splash screen image dimensions (should be 620x300)."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "UWP"
+msgstr ""
+
+#: platform/uwp/export/export.cpp platform/windows/export/export.cpp
+msgid "Signtool"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Debug Certificate"
+msgstr ""
+
+#: platform/uwp/export/export.cpp
+msgid "Debug Algorithm"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Failed to rename temporary file \"%s\"."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Identity Type"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Timestamp Server URL"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Digest Algorithm"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Modify Resources"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "File Version"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Product Version"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Company Name"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Product Name"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "File Description"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Trademarks"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Resources Modification"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Could not find rcedit executable at \"%s\"."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Could not find wine executable at \"%s\"."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid ""
+"Could not start rcedit executable. Configure rcedit path in the Editor "
+"Settings (Export > Windows > Rcedit), or disable \"Application > Modify "
+"Resources\" in the export preset."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "rcedit failed to modify executable: %s."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Could not find signtool executable at \"%s\"."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Could not find osslsigncode executable at \"%s\"."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Invalid identity type."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Invalid timestamp server."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid ""
+"Could not start signtool executable. Configure signtool path in the Editor "
+"Settings (Export > Windows > Signtool), or disable \"Codesign\" in the "
+"export preset."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Signtool failed to sign executable: %s."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Failed to remove temporary file \"%s\"."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid ""
+"The rcedit tool must be configured in the Editor Settings (Export > Windows "
+"> Rcedit) to change the icon or app information data."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Invalid icon path:"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Invalid file version:"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Invalid product version:"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Windows executables cannot be >= 4 GiB."
+msgstr ""
+
+#: platform/windows/export/export.cpp platform/x11/export/export.cpp
+msgid "Failed to open executable file \"%s\"."
+msgstr ""
+
+#: platform/windows/export/export.cpp platform/x11/export/export.cpp
+msgid "Executable file header corrupted."
+msgstr ""
+
+#: platform/windows/export/export.cpp platform/x11/export/export.cpp
+msgid "Executable \"pck\" section not found."
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Windows"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Rcedit"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Osslsigncode"
+msgstr ""
+
+#: platform/windows/export/export.cpp
+msgid "Wine"
+msgstr ""
+
+#: platform/x11/export/export.cpp
+msgid "32-bit executables cannot have embedded data >= 4 GiB."
+msgstr ""
+
+#: scene/2d/animated_sprite.cpp scene/3d/sprite_3d.cpp
+#: scene/resources/texture.cpp
+msgid "Frames"
+msgstr ""
+
+#: scene/2d/animated_sprite.cpp
+msgid ""
+"A SpriteFrames resource must be created or set in the \"Frames\" property in "
+"order for AnimatedSprite to display frames."
+msgstr ""
+
+#: scene/2d/animated_sprite.cpp scene/2d/cpu_particles_2d.cpp
+#: scene/2d/particles_2d.cpp scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Speed Scale"
+msgstr ""
+
+#: scene/2d/animated_sprite.cpp scene/2d/audio_stream_player_2d.cpp
+#: scene/3d/audio_stream_player_3d.cpp scene/3d/sprite_3d.cpp
+#: scene/audio/audio_stream_player.cpp
+msgid "Playing"
+msgstr ""
+
+#: scene/2d/animated_sprite.cpp scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
+msgid "Centered"
+msgstr ""
+
+#: scene/2d/animated_sprite.cpp scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
+#: scene/gui/texture_button.cpp scene/gui/texture_rect.cpp
+msgid "Flip H"
+msgstr ""
+
+#: scene/2d/animated_sprite.cpp scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
+#: scene/gui/texture_button.cpp scene/gui/texture_rect.cpp
+msgid "Flip V"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Monitoring"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Monitorable"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Physics Overrides"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Space Override"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Gravity Point"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Gravity Distance Scale"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Gravity Vec"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/2d/cpu_particles_2d.cpp scene/3d/area.cpp
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Gravity"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Linear Damp"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Angular Damp"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Audio Bus"
+msgstr ""
+
+#: scene/2d/area_2d.cpp scene/3d/area.cpp
+msgid "Override"
+msgstr ""
+
+#: scene/2d/audio_stream_player_2d.cpp scene/audio/audio_stream_player.cpp
+#: scene/gui/video_player.cpp servers/audio/effects/audio_effect_amplify.cpp
+msgid "Volume dB"
+msgstr ""
+
+#: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
+#: scene/audio/audio_stream_player.cpp
+#: servers/audio/effects/audio_effect_pitch_shift.cpp
+msgid "Pitch Scale"
+msgstr ""
+
+#: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
+#: scene/audio/audio_stream_player.cpp scene/gui/video_player.cpp
+msgid "Autoplay"
+msgstr ""
+
+#: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
+#: scene/audio/audio_stream_player.cpp
+msgid "Stream Paused"
+msgstr ""
+
+#: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
+#: scene/3d/light.cpp scene/3d/reflection_probe.cpp
+#: scene/3d/visibility_notifier.cpp scene/3d/visual_instance.cpp
+#: scene/resources/material.cpp
+msgid "Max Distance"
+msgstr ""
+
+#: scene/2d/audio_stream_player_2d.cpp scene/3d/light.cpp
+msgid "Attenuation"
+msgstr ""
+
+#: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
+#: scene/audio/audio_stream_player.cpp scene/gui/video_player.cpp
+msgid "Bus"
+msgstr ""
+
+#: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
+msgid "Area Mask"
+msgstr ""
+
+#: scene/2d/back_buffer_copy.cpp
+msgid "Copy Mode"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Anchor Mode"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Rotating"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp scene/2d/listener_2d.cpp scene/3d/camera.cpp
+#: scene/3d/listener.cpp scene/animation/animation_blend_tree.cpp
+msgid "Current"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp scene/gui/graph_edit.cpp
+msgid "Zoom"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp scene/main/canvas_layer.cpp
+msgid "Custom Viewport"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp scene/3d/camera.cpp scene/3d/interpolated_camera.cpp
+#: scene/animation/animation_player.cpp scene/animation/animation_tree.cpp
+#: scene/animation/animation_tree_player.cpp scene/main/timer.cpp
+msgid "Process Mode"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Limit"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp scene/gui/control.cpp scene/gui/nine_patch_rect.cpp
+#: scene/resources/style_box.cpp scene/resources/texture.cpp
+msgid "Left"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp scene/gui/control.cpp scene/gui/nine_patch_rect.cpp
+#: scene/resources/style_box.cpp scene/resources/texture.cpp
+msgid "Right"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp scene/gui/control.cpp scene/gui/nine_patch_rect.cpp
+#: scene/resources/dynamic_font.cpp scene/resources/style_box.cpp
+#: scene/resources/texture.cpp
+msgid "Bottom"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Smoothed"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Draw Margin"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Drag Margin H Enabled"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Drag Margin V Enabled"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Smoothing"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "H"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "V"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Drag Margin"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Draw Screen"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Draw Limits"
+msgstr ""
+
+#: scene/2d/camera_2d.cpp
+msgid "Draw Drag Margin"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp scene/resources/environment.cpp
+#: scene/resources/material.cpp
+msgid "Blend Mode"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Light Mode"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Particles Animation"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Particles Anim H Frames"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Particles Anim V Frames"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Particles Anim Loop"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp scene/3d/spatial.cpp
+msgid "Visibility"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp scene/3d/spatial.cpp scene/gui/progress_bar.cpp
+#: scene/gui/rich_text_effect.cpp scene/main/canvas_layer.cpp
+msgid "Visible"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Self Modulate"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Show Behind Parent"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Show On Top"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp scene/2d/light_occluder_2d.cpp
+#: scene/2d/tile_map.cpp
+msgid "Light Mask"
+msgstr ""
+
+#: scene/2d/canvas_item.cpp
+msgid "Use Parent Material"
+msgstr ""
+
+#: scene/2d/canvas_modulate.cpp
+msgid ""
+"Only one visible CanvasModulate is allowed per scene (or set of instanced "
+"scenes). The first created one will work, while the rest will be ignored."
+msgstr ""
+
+#: scene/2d/collision_object_2d.cpp
+msgid ""
+"This node has no shape, so it can't collide or interact with other objects.\n"
+"Consider adding a CollisionShape2D or CollisionPolygon2D as a child to "
+"define its shape."
+msgstr ""
+
+#: scene/2d/collision_object_2d.cpp
+msgid "Pickable"
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp
+msgid ""
+"CollisionPolygon2D only serves to provide a collision shape to a "
+"CollisionObject2D derived node. Please only use it as a child of Area2D, "
+"StaticBody2D, RigidBody2D, KinematicBody2D, etc. to give them a shape."
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp
+msgid "An empty CollisionPolygon2D has no effect on collision."
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp
+msgid "Invalid polygon. At least 3 points are needed in 'Solids' build mode."
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp
+msgid "Invalid polygon. At least 2 points are needed in 'Segments' build mode."
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp scene/2d/collision_shape_2d.cpp
+msgid ""
+"The One Way Collision property will be ignored when the parent is an Area2D."
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp
+msgid "Build Mode"
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp scene/2d/collision_shape_2d.cpp
+#: scene/3d/collision_polygon.cpp scene/3d/collision_shape.cpp
+#: scene/animation/animation_node_state_machine.cpp scene/gui/base_button.cpp
+#: scene/gui/texture_button.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Disabled"
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp scene/2d/collision_shape_2d.cpp
+msgid "One Way Collision"
+msgstr ""
+
+#: scene/2d/collision_polygon_2d.cpp scene/2d/collision_shape_2d.cpp
+msgid "One Way Collision Margin"
+msgstr ""
+
+#: scene/2d/collision_shape_2d.cpp
+msgid ""
+"CollisionShape2D only serves to provide a collision shape to a "
+"CollisionObject2D derived node. Please only use it as a child of Area2D, "
+"StaticBody2D, RigidBody2D, KinematicBody2D, etc. to give them a shape."
+msgstr ""
+
+#: scene/2d/collision_shape_2d.cpp
+msgid ""
+"A shape must be provided for CollisionShape2D to function. Please create a "
+"shape resource for it!"
+msgstr ""
+
+#: scene/2d/collision_shape_2d.cpp
+msgid ""
+"Polygon-based shapes are not meant be used nor edited directly through the "
+"CollisionShape2D node. Please use the CollisionPolygon2D node instead."
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp
+msgid ""
+"CPUParticles2D animation requires the usage of a CanvasItemMaterial with "
+"\"Particles Animation\" enabled."
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Emitting"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Lifetime"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp scene/main/timer.cpp
+msgid "One Shot"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Preprocess"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Explosiveness"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Randomness"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Lifetime Randomness"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Fixed FPS"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Fract Delta"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Drawing"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Local Coords"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
+msgid "Draw Order"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Emission Shape"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Sphere Radius"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp
+msgid "Rect Extents"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+msgid "Normals"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Align Y"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Direction"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "Spread"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Initial Velocity"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Velocity Random"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp servers/physics_2d_server.cpp
+#: servers/physics_server.cpp
+msgid "Angular Velocity"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Velocity Curve"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Orbit Velocity"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Linear Accel"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Accel"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Accel Random"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Accel Curve"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Radial Accel"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Tangential Accel"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/2d/joints_2d.cpp
+#: scene/3d/cpu_particles.cpp scene/3d/physics_body.cpp
+#: scene/3d/physics_joint.cpp scene/3d/vehicle_body.cpp
+#: scene/resources/particles_material.cpp
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "Damping"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Damping Random"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Damping Curve"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp scene/3d/light.cpp
+#: scene/resources/particles_material.cpp
+msgid "Angle"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Angle Random"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Angle Curve"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+msgid "Scale Amount"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+msgid "Scale Amount Random"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+msgid "Scale Amount Curve"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Color Ramp"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Color Initial Ramp"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Hue Variation"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Variation"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Variation Random"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Variation Curve"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Speed Random"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Speed Curve"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Offset Random"
+msgstr ""
+
+#: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
+#: scene/resources/particles_material.cpp
+msgid "Offset Curve"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp
+msgid "Node A and Node B must be PhysicsBody2Ds"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp
+msgid "Node A must be a PhysicsBody2D"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp
+msgid "Node B must be a PhysicsBody2D"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp
+msgid "Joint is not connected to two PhysicsBody2Ds"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp
+msgid "Node A and Node B must be different PhysicsBody2Ds"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp scene/3d/physics_joint.cpp
+msgid "Node A"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp scene/3d/physics_joint.cpp
+msgid "Node B"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
+#: scene/3d/light.cpp scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
+#: scene/resources/environment.cpp
+msgid "Bias"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp
+msgid "Disable Collision"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
+msgid "Softness"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp scene/resources/animation.cpp
+#: scene/resources/ray_shape.cpp scene/resources/segment_shape_2d.cpp
+msgid "Length"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp
+msgid "Initial Offset"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp scene/3d/vehicle_body.cpp
+msgid "Rest Length"
+msgstr ""
+
+#: scene/2d/joints_2d.cpp scene/3d/physics_joint.cpp scene/3d/vehicle_body.cpp
+msgid "Stiffness"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid ""
+"A texture with the shape of the light must be supplied to the \"Texture\" "
+"property."
+msgstr ""
+
+#: scene/2d/light_2d.cpp scene/3d/light.cpp scene/gui/reference_rect.cpp
+msgid "Editor Only"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Texture Scale"
+msgstr ""
+
+#: scene/2d/light_2d.cpp scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
+#: scene/3d/light.cpp scene/resources/environment.cpp
+#: scene/resources/material.cpp scene/resources/sky.cpp
+msgid "Energy"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Z Min"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Z Max"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Layer Min"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Layer Max"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Item Cull Mask"
+msgstr ""
+
+#: scene/2d/light_2d.cpp scene/3d/light.cpp scene/resources/style_box.cpp
+msgid "Shadow"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Buffer Size"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Gradient Length"
+msgstr ""
+
+#: scene/2d/light_2d.cpp
+msgid "Filter Smooth"
+msgstr ""
+
+#: scene/2d/light_occluder_2d.cpp
+msgid "Closed"
+msgstr ""
+
+#: scene/2d/light_occluder_2d.cpp scene/resources/material.cpp
+msgid "Cull Mode"
+msgstr ""
+
+#: scene/2d/light_occluder_2d.cpp
+msgid ""
+"An occluder polygon must be set (or drawn) for this occluder to take effect."
+msgstr ""
+
+#: scene/2d/light_occluder_2d.cpp
+msgid "The occluder polygon for this occluder is empty. Please draw a polygon."
+msgstr ""
+
+#: scene/2d/line_2d.cpp
+msgid "Width Curve"
+msgstr ""
+
+#: scene/2d/line_2d.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Default Color"
+msgstr ""
+
+#: scene/2d/line_2d.cpp scene/resources/texture.cpp
+msgid "Fill"
+msgstr ""
+
+#: scene/2d/line_2d.cpp scene/resources/texture.cpp
+msgid "Gradient"
+msgstr ""
+
+#: scene/2d/line_2d.cpp
+msgid "Texture Mode"
+msgstr ""
+
+#: scene/2d/line_2d.cpp
+msgid "Capping"
+msgstr ""
+
+#: scene/2d/line_2d.cpp
+msgid "Joint Mode"
+msgstr ""
+
+#: scene/2d/line_2d.cpp
+msgid "Begin Cap Mode"
+msgstr ""
+
+#: scene/2d/line_2d.cpp
+msgid "End Cap Mode"
+msgstr ""
+
+#: scene/2d/line_2d.cpp scene/2d/polygon_2d.cpp scene/resources/style_box.cpp
+msgid "Border"
+msgstr ""
+
+#: scene/2d/line_2d.cpp
+msgid "Sharp Limit"
+msgstr ""
+
+#: scene/2d/line_2d.cpp
+msgid "Round Precision"
+msgstr ""
+
+#: scene/2d/line_2d.cpp scene/2d/polygon_2d.cpp
+#: scene/resources/dynamic_font.cpp
+msgid "Antialiased"
+msgstr ""
+
+#: scene/2d/multimesh_instance_2d.cpp scene/3d/multimesh_instance.cpp
+msgid "Multimesh"
+msgstr ""
+
+#: scene/2d/navigation_2d.cpp scene/3d/baked_lightmap.cpp
+#: scene/3d/navigation.cpp scene/animation/root_motion_view.cpp
+#: scene/resources/world_2d.cpp servers/physics_2d/physics_2d_server_sw.cpp
+msgid "Cell Size"
+msgstr ""
+
+#: scene/2d/navigation_2d.cpp scene/3d/navigation.cpp
+msgid "Edge Connection Margin"
+msgstr ""
+
+#: scene/2d/navigation_2d.cpp
+msgid ""
+"'Navigation2D' node and 'Navigation2D.get_simple_path()' are deprecated and "
+"will be removed in a future version. Use 'Navigation2DServer.map_get_path()' "
+"instead."
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Pathfinding"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Path Desired Distance"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Target Desired Distance"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Path Max Distance"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Avoidance"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Avoidance Enabled"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Neighbor Dist"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Max Neighbors"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Time Horizon"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
+msgid "Max Speed"
+msgstr ""
+
+#: scene/2d/navigation_agent_2d.cpp
+msgid ""
+"The NavigationAgent2D can be used only under a Node2D inheriting parent node."
+msgstr ""
+
+#: scene/2d/navigation_obstacle_2d.cpp scene/3d/navigation_obstacle.cpp
+msgid "Estimate Radius"
+msgstr ""
+
+#: scene/2d/navigation_obstacle_2d.cpp
+msgid ""
+"The NavigationObstacle2D only serves to provide collision avoidance to a "
+"Node2D object."
+msgstr ""
+
+#: scene/2d/navigation_polygon.cpp
+msgid ""
+"A NavigationPolygon resource must be set or created for this node to work. "
+"Please set a property or draw a polygon."
+msgstr ""
+
+#: scene/2d/navigation_polygon.cpp
+msgid "Navpoly"
+msgstr ""
+
+#: scene/2d/navigation_polygon.cpp scene/3d/navigation_mesh_instance.cpp
+msgid "Enter Cost"
+msgstr ""
+
+#: scene/2d/navigation_polygon.cpp scene/3d/navigation_mesh_instance.cpp
+msgid "Travel Cost"
+msgstr ""
+
+#: scene/2d/node_2d.cpp scene/2d/polygon_2d.cpp scene/3d/spatial.cpp
+#: scene/main/canvas_layer.cpp
+msgid "Rotation Degrees"
+msgstr ""
+
+#: scene/2d/node_2d.cpp scene/3d/spatial.cpp
+msgid "Global Rotation"
+msgstr ""
+
+#: scene/2d/node_2d.cpp
+msgid "Global Rotation Degrees"
+msgstr ""
+
+#: scene/2d/node_2d.cpp
+msgid "Global Scale"
+msgstr ""
+
+#: scene/2d/node_2d.cpp scene/3d/spatial.cpp
+msgid "Global Transform"
+msgstr ""
+
+#: scene/2d/node_2d.cpp
+msgid "Z As Relative"
+msgstr ""
+
+#: scene/2d/parallax_background.cpp scene/gui/scroll_container.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Scroll"
+msgstr ""
+
+#: scene/2d/parallax_background.cpp
+msgid "Base Offset"
+msgstr ""
+
+#: scene/2d/parallax_background.cpp
+msgid "Base Scale"
+msgstr ""
+
+#: scene/2d/parallax_background.cpp
+msgid "Limit Begin"
+msgstr ""
+
+#: scene/2d/parallax_background.cpp
+msgid "Limit End"
+msgstr ""
+
+#: scene/2d/parallax_background.cpp
+msgid "Ignore Camera Zoom"
+msgstr ""
+
+#: scene/2d/parallax_layer.cpp
+msgid ""
+"ParallaxLayer node only works when set as child of a ParallaxBackground node."
+msgstr ""
+
+#: scene/2d/parallax_layer.cpp scene/2d/physics_body_2d.cpp
+#: scene/3d/physics_body.cpp scene/3d/vehicle_body.cpp
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Motion"
+msgstr ""
+
+#: scene/2d/parallax_layer.cpp
+msgid "Mirroring"
+msgstr ""
+
+#: scene/2d/particles_2d.cpp
+msgid ""
+"GPU-based particles are not supported by the GLES2 video driver.\n"
+"Use the CPUParticles2D node instead. You can use the \"Convert to "
+"CPUParticles2D\" toolbar option for this purpose."
+msgstr ""
+
+#: scene/2d/particles_2d.cpp
+msgid ""
+"On macOS, Particles2D rendering is much slower than CPUParticles2D due to "
+"transform feedback being implemented on the CPU instead of the GPU.\n"
+"Consider using CPUParticles2D instead when targeting macOS.\n"
+"You can use the \"Convert to CPUParticles2D\" toolbar option for this "
+"purpose."
+msgstr ""
+
+#: scene/2d/particles_2d.cpp scene/3d/particles.cpp
+msgid ""
+"A material to process the particles is not assigned, so no behavior is "
+"imprinted."
+msgstr ""
+
+#: scene/2d/particles_2d.cpp
+msgid ""
+"Particles2D animation requires the usage of a CanvasItemMaterial with "
+"\"Particles Animation\" enabled."
+msgstr ""
+
+#: scene/2d/particles_2d.cpp
+msgid "Visibility Rect"
+msgstr ""
+
+#: scene/2d/particles_2d.cpp scene/3d/particles.cpp
+msgid "Process Material"
+msgstr ""
+
+#: scene/2d/path_2d.cpp scene/3d/path.cpp scene/resources/sky.cpp
+#: scene/resources/texture.cpp
+msgid "Curve"
+msgstr ""
+
+#: scene/2d/path_2d.cpp
+msgid "PathFollow2D only works when set as a child of a Path2D node."
+msgstr ""
+
+#: scene/2d/path_2d.cpp scene/3d/path.cpp
+msgid "Unit Offset"
+msgstr ""
+
+#: scene/2d/path_2d.cpp scene/3d/camera.cpp scene/3d/path.cpp
+msgid "H Offset"
+msgstr ""
+
+#: scene/2d/path_2d.cpp scene/3d/camera.cpp scene/3d/path.cpp
+msgid "V Offset"
+msgstr ""
+
+#: scene/2d/path_2d.cpp scene/3d/path.cpp
+msgid "Cubic Interp"
+msgstr ""
+
+#: scene/2d/path_2d.cpp
+msgid "Lookahead"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/visual_instance.cpp
+msgid "Layers"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Constant Linear Velocity"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Constant Angular Velocity"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/2d/tile_map.cpp scene/3d/physics_body.cpp
+#: scene/resources/physics_material.cpp
+msgid "Friction"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/2d/tile_map.cpp scene/3d/physics_body.cpp
+#: scene/resources/physics_material.cpp
+msgid "Bounce"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Physics Material Override"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Default Gravity"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp
+msgid ""
+"Size changes to RigidBody2D (in character or rigid modes) will be overridden "
+"by the physics engine when running.\n"
+"Change the size in children collision shapes instead."
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Mass"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp
+msgid "Inertia"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Weight"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Gravity Scale"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Custom Integrator"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Continuous CD"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Contacts Reported"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Contact Monitor"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Sleeping"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Can Sleep"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Damp"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Angular"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp
+msgid "Applied Forces"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp
+msgid "Torque"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Safe Margin"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Sync To Physics"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Moving Platform"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Apply Velocity On Leave"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/2d/touch_screen_button.cpp
+#: scene/3d/physics_body.cpp scene/gui/texture_button.cpp
+#: scene/resources/default_theme/default_theme.cpp
+#: scene/resources/line_shape_2d.cpp scene/resources/material.cpp
+msgid "Normal"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Remainder"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Local Shape"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collider"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collider ID"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collider RID"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collider Shape"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Collider Shape Index"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collider Velocity"
+msgstr ""
+
+#: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
+msgid "Collider Metadata"
+msgstr ""
+
+#: scene/2d/polygon_2d.cpp
+msgid "Invert"
+msgstr ""
+
+#: scene/2d/polygon_2d.cpp
+msgid "Vertex Colors"
+msgstr ""
+
+#: scene/2d/polygon_2d.cpp
+msgid "Internal Vertex Count"
+msgstr ""
+
+#: scene/2d/position_2d.cpp
+msgid "Gizmo Extents"
+msgstr ""
+
+#: scene/2d/ray_cast_2d.cpp scene/3d/ray_cast.cpp
+msgid "Exclude Parent"
+msgstr ""
+
+#: scene/2d/ray_cast_2d.cpp scene/3d/ray_cast.cpp
+msgid "Cast To"
+msgstr ""
+
+#: scene/2d/ray_cast_2d.cpp scene/3d/ray_cast.cpp
+msgid "Collide With"
+msgstr ""
+
+#: scene/2d/ray_cast_2d.cpp scene/3d/camera.cpp scene/3d/ray_cast.cpp
+msgid "Areas"
+msgstr ""
+
+#: scene/2d/ray_cast_2d.cpp scene/3d/camera.cpp scene/3d/ray_cast.cpp
+msgid "Bodies"
+msgstr ""
+
+#: scene/2d/remote_transform_2d.cpp
+msgid "Path property must point to a valid Node2D node to work."
+msgstr ""
+
+#: scene/2d/remote_transform_2d.cpp scene/3d/remote_transform.cpp
+msgid "Remote Path"
+msgstr ""
+
+#: scene/2d/remote_transform_2d.cpp scene/3d/remote_transform.cpp
+msgid "Use Global Coordinates"
+msgstr ""
+
+#: scene/2d/skeleton_2d.cpp scene/3d/skeleton.cpp
+msgid "Rest"
+msgstr ""
+
+#: scene/2d/skeleton_2d.cpp
+msgid "Default Length"
+msgstr ""
+
+#: scene/2d/skeleton_2d.cpp
+msgid "This Bone2D chain should end at a Skeleton2D node."
+msgstr ""
+
+#: scene/2d/skeleton_2d.cpp
+msgid "A Bone2D only works with a Skeleton2D or another Bone2D as parent node."
+msgstr ""
+
+#: scene/2d/skeleton_2d.cpp
+msgid ""
+"This bone lacks a proper REST pose. Go to the Skeleton2D node and set one."
+msgstr ""
+
+#: scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
+msgid "Hframes"
+msgstr ""
+
+#: scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
+msgid "Vframes"
+msgstr ""
+
+#: scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
+msgid "Frame Coords"
+msgstr ""
+
+#: scene/2d/sprite.cpp scene/resources/texture.cpp
+msgid "Filter Clip"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid ""
+"TileMap with Use Parent on needs a parent CollisionObject2D to give shapes "
+"to. Please use it as a child of Area2D, StaticBody2D, RigidBody2D, "
+"KinematicBody2D, etc. to give them a shape."
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Tile Set"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Quadrant Size"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Custom Transform"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Half Offset"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Tile Origin"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Y Sort"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Show Collision"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Compatibility Mode"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Centered Textures"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Cell Clip UV"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Use Parent"
+msgstr ""
+
+#: scene/2d/tile_map.cpp
+msgid "Use Kinematic"
+msgstr ""
+
+#: scene/2d/touch_screen_button.cpp
+msgid "Shape Centered"
+msgstr ""
+
+#: scene/2d/touch_screen_button.cpp
+msgid "Shape Visible"
+msgstr ""
+
+#: scene/2d/touch_screen_button.cpp
+msgid "Passby Press"
+msgstr ""
+
+#: scene/2d/touch_screen_button.cpp
+msgid "Visibility Mode"
+msgstr ""
+
+#: scene/2d/visibility_notifier_2d.cpp
+msgid ""
+"VisibilityEnabler2D works best when used with the edited scene root directly "
+"as parent."
+msgstr ""
+
+#: scene/2d/visibility_notifier_2d.cpp scene/3d/visibility_notifier.cpp
+msgid "Pause Animations"
+msgstr ""
+
+#: scene/2d/visibility_notifier_2d.cpp scene/3d/visibility_notifier.cpp
+msgid "Freeze Bodies"
+msgstr ""
+
+#: scene/2d/visibility_notifier_2d.cpp
+msgid "Pause Particles"
+msgstr ""
+
+#: scene/2d/visibility_notifier_2d.cpp
+msgid "Pause Animated Sprites"
+msgstr ""
+
+#: scene/2d/visibility_notifier_2d.cpp
+msgid "Process Parent"
+msgstr ""
+
+#: scene/2d/visibility_notifier_2d.cpp
+msgid "Physics Process Parent"
+msgstr ""
+
+#: scene/3d/area.cpp
+msgid "Reverb Bus"
+msgstr ""
+
+#: scene/3d/area.cpp
+msgid "Uniformity"
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp
+msgid "ARVRCamera must have an ARVROrigin node as its parent."
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp
+msgid "Controller ID"
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp servers/arvr/arvr_positional_tracker.cpp
+msgid "Rumble"
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp
+msgid "ARVRController must have an ARVROrigin node as its parent."
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp
+msgid ""
+"The controller ID must not be 0 or this controller won't be bound to an "
+"actual controller."
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp
+msgid "Anchor ID"
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp
+msgid "ARVRAnchor must have an ARVROrigin node as its parent."
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp
+msgid ""
+"The anchor ID must not be 0 or this anchor won't be bound to an actual "
+"anchor."
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp
+msgid "ARVROrigin requires an ARVRCamera child node."
+msgstr ""
+
+#: scene/3d/arvr_nodes.cpp servers/arvr_server.cpp
+msgid "World Scale"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Attenuation Model"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Unit dB"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Unit Size"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Max dB"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Out Of Range Mode"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Emission Angle"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Degrees"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Filter Attenuation dB"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Attenuation Filter"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+#: servers/audio/effects/audio_effect_chorus.cpp
+#: servers/audio/effects/audio_effect_filter.cpp
+msgid "Cutoff Hz"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+#: servers/audio/effects/audio_effect_filter.cpp
+msgid "dB"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Doppler"
+msgstr ""
+
+#: scene/3d/audio_stream_player_3d.cpp
+msgid "Tracking"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
+#: scene/3d/reflection_probe.cpp
+msgid "Interior"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Finding meshes and lights"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Preparing geometry (%d/%d)"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Preparing environment"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Generating capture"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Saving lightmaps"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Done"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
+#: scene/3d/reflection_probe.cpp scene/resources/box_shape.cpp
+#: scene/resources/rectangle_shape_2d.cpp
+msgid "Extents"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Tweaks"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Bounces"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Bounce Indirect Energy"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Use Denoiser"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp scene/resources/texture.cpp
+msgid "Use HDR"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Use Color"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Default Texels Per Unit"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp scene/resources/texture.cpp
+msgid "Atlas"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Generate"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Max Size"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Custom Sky"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Custom Sky Rotation Degrees"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp scene/3d/ray_cast.cpp
+msgid "Custom Color"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Custom Energy"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Min Light"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
+msgid "Propagation"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Image Path"
+msgstr ""
+
+#: scene/3d/baked_lightmap.cpp
+msgid "Light Data"
+msgstr ""
+
+#: scene/3d/bone_attachment.cpp scene/3d/physics_body.cpp
+msgid "Bone Name"
+msgstr ""
+
+#: scene/3d/camera.cpp
+msgid "Keep Aspect"
+msgstr ""
+
+#: scene/3d/camera.cpp scene/3d/light.cpp scene/3d/reflection_probe.cpp
+msgid "Cull Mask"
+msgstr ""
+
+#: scene/3d/camera.cpp
+msgid "Doppler Tracking"
+msgstr ""
+
+#: scene/3d/camera.cpp
+msgid "Projection"
+msgstr ""
+
+#: scene/3d/camera.cpp
+msgid "FOV"
+msgstr ""
+
+#: scene/3d/camera.cpp
+msgid "Frustum Offset"
+msgstr ""
+
+#: scene/3d/camera.cpp
+msgid "Near"
+msgstr ""
+
+#: scene/3d/camera.cpp
+msgid "Far"
+msgstr ""
+
+#: scene/3d/camera.cpp scene/3d/collision_polygon.cpp scene/3d/spring_arm.cpp
+#: scene/gui/control.cpp scene/resources/default_theme/default_theme.cpp
+#: scene/resources/shape.cpp scene/resources/style_box.cpp
+#: scene/resources/texture.cpp servers/physics_2d_server.cpp
+#: servers/physics_server.cpp
+msgid "Margin"
+msgstr ""
+
+#: scene/3d/camera.cpp
+msgid "Clip To"
+msgstr ""
+
+#: scene/3d/collision_object.cpp scene/3d/soft_body.cpp
+msgid "Ray Pickable"
+msgstr ""
+
+#: scene/3d/collision_object.cpp
+msgid "Capture On Drag"
+msgstr ""
+
+#: scene/3d/collision_object.cpp
+msgid ""
+"This node has no shape, so it can't collide or interact with other objects.\n"
+"Consider adding a CollisionShape or CollisionPolygon as a child to define "
+"its shape."
+msgstr ""
+
+#: scene/3d/collision_polygon.cpp
+msgid ""
+"CollisionPolygon only serves to provide a collision shape to a "
+"CollisionObject derived node. Please only use it as a child of Area, "
+"StaticBody, RigidBody, KinematicBody, etc. to give them a shape."
+msgstr ""
+
+#: scene/3d/collision_polygon.cpp
+msgid "An empty CollisionPolygon has no effect on collision."
+msgstr ""
+
+#: scene/3d/collision_shape.cpp
+msgid ""
+"CollisionShape only serves to provide a collision shape to a CollisionObject "
+"derived node. Please only use it as a child of Area, StaticBody, RigidBody, "
+"KinematicBody, etc. to give them a shape."
+msgstr ""
+
+#: scene/3d/collision_shape.cpp
+msgid ""
+"A shape must be provided for CollisionShape to function. Please create a "
+"shape resource for it."
+msgstr ""
+
+#: scene/3d/collision_shape.cpp
+msgid ""
+"Plane shapes don't work well and will be removed in future versions. Please "
+"don't use them."
+msgstr ""
+
+#: scene/3d/collision_shape.cpp
+msgid ""
+"ConcavePolygonShape doesn't support RigidBody in another mode than static."
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp
+msgid "Nothing is visible because no mesh has been assigned."
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp
+msgid ""
+"CPUParticles animation requires the usage of a SpatialMaterial whose "
+"Billboard Mode is set to \"Particle Billboard\"."
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Box Extents"
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Ring Radius"
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Ring Inner Radius"
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Ring Height"
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Ring Axis"
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Rotate Y"
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Disable Z"
+msgstr ""
+
+#: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
+msgid "Flatness"
+msgstr ""
+
+#: scene/3d/cull_instance.cpp servers/visual_server.cpp
+msgid "Portals"
+msgstr ""
+
+#: scene/3d/cull_instance.cpp
+msgid "Portal Mode"
+msgstr ""
+
+#: scene/3d/cull_instance.cpp
+msgid "Include In Bound"
+msgstr ""
+
+#: scene/3d/cull_instance.cpp
+msgid "Allow Merging"
+msgstr ""
+
+#: scene/3d/cull_instance.cpp
+msgid "Autoplace Priority"
+msgstr ""
+
+#: scene/3d/gi_probe.cpp
+msgid "Plotting Meshes"
+msgstr ""
+
+#: scene/3d/gi_probe.cpp
+msgid "Finishing Plot"
+msgstr ""
+
+#: scene/3d/gi_probe.cpp
+msgid ""
+"GIProbes are not supported by the GLES2 video driver.\n"
+"Use a BakedLightmap instead."
+msgstr ""
+
+#: scene/3d/gi_probe.cpp
+msgid ""
+"The GIProbe Compress property has been deprecated due to known bugs and no "
+"longer has any effect.\n"
+"To remove this warning, disable the GIProbe's Compress property."
+msgstr ""
+
+#: scene/3d/gi_probe.cpp
+msgid "Subdiv"
+msgstr ""
+
+#: scene/3d/gi_probe.cpp
+msgid "Dynamic Range"
+msgstr ""
+
+#: scene/3d/gi_probe.cpp scene/3d/light.cpp
+msgid "Normal Bias"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
+#: scene/resources/primitive_meshes.cpp
+msgid "Pixel Size"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
+msgid "Billboard"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
+msgid "Shaded"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
+msgid "Double Sided"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp scene/resources/material.cpp
+msgid "No Depth Test"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp scene/resources/material.cpp
+msgid "Fixed Size"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
+msgid "Alpha Cut"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/resources/material.cpp
+msgid "Alpha Scissor Threshold"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp scene/resources/material.cpp
+msgid "Render Priority"
+msgstr ""
+
+#: scene/3d/label_3d.cpp
+msgid "Outline Render Priority"
+msgstr ""
+
+#: scene/3d/label_3d.cpp
+msgid "Outline Modulate"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/resources/default_theme/default_theme.cpp
+#: scene/resources/dynamic_font.cpp scene/resources/primitive_meshes.cpp
+msgid "Font"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/resources/primitive_meshes.cpp
+msgid "Horizontal Alignment"
+msgstr ""
+
+#: scene/3d/label_3d.cpp
+msgid "Vertical Alignment"
+msgstr ""
+
+#: scene/3d/label_3d.cpp scene/gui/dialogs.cpp scene/gui/label.cpp
+msgid "Autowrap"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Indirect Energy"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Negative"
+msgstr ""
+
+#: scene/3d/light.cpp scene/resources/material.cpp
+#: scene/resources/visual_shader.cpp
+msgid "Specular"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Bake Mode"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Contact"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Reverse Cull Face"
+msgstr ""
+
+#: scene/3d/light.cpp servers/visual_server.cpp
+msgid "Directional Shadow"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Split 1"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Split 2"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Split 3"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Blend Splits"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Bias Split Scale"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Depth Range"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Omni"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Shadow Mode"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Shadow Detail"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "A SpotLight with an angle wider than 90 degrees cannot cast shadows."
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Spot"
+msgstr ""
+
+#: scene/3d/light.cpp
+msgid "Angle Attenuation"
+msgstr ""
+
+#: scene/3d/mesh_instance.cpp
+msgid "Software Skinning"
+msgstr ""
+
+#: scene/3d/mesh_instance.cpp
+msgid "Transform Normals"
+msgstr ""
+
+#: scene/3d/navigation.cpp
+msgid ""
+"'Navigation' node and 'Navigation.get_simple_path()' are deprecated and will "
+"be removed in a future version. Use 'NavigationServer.map_get_path()' "
+"instead."
+msgstr ""
+
+#: scene/3d/navigation.cpp scene/resources/curve.cpp
+msgid "Up Vector"
+msgstr ""
+
+#: scene/3d/navigation.cpp
+msgid "Cell Height"
+msgstr ""
+
+#: scene/3d/navigation_agent.cpp
+msgid "Agent Height Offset"
+msgstr ""
+
+#: scene/3d/navigation_agent.cpp
+msgid "Ignore Y"
+msgstr ""
+
+#: scene/3d/navigation_agent.cpp
+msgid ""
+"The NavigationAgent can be used only under a Spatial inheriting parent node."
+msgstr ""
+
+#: scene/3d/navigation_mesh_instance.cpp scene/resources/mesh_library.cpp
+msgid "NavMesh"
+msgstr ""
+
+#: scene/3d/navigation_obstacle.cpp
+msgid ""
+"The NavigationObstacle only serves to provide collision avoidance to a "
+"Spatial inheriting parent object."
+msgstr ""
+
+#: scene/3d/occluder.cpp
+msgid "No shape is set."
+msgstr ""
+
+#: scene/3d/occluder.cpp
+msgid "Only uniform scales are supported."
+msgstr ""
+
+#: scene/3d/particles.cpp
+msgid ""
+"GPU-based particles are not supported by the GLES2 video driver.\n"
+"Use the CPUParticles node instead. You can use the \"Convert to "
+"CPUParticles\" toolbar option for this purpose."
+msgstr ""
+
+#: scene/3d/particles.cpp
+msgid ""
+"On macOS, Particles rendering is much slower than CPUParticles due to "
+"transform feedback being implemented on the CPU instead of the GPU.\n"
+"Consider using CPUParticles instead when targeting macOS.\n"
+"You can use the \"Convert to CPUParticles\" toolbar option for this purpose."
+msgstr ""
+
+#: scene/3d/particles.cpp
+msgid ""
+"Nothing is visible because meshes have not been assigned to draw passes."
+msgstr ""
+
+#: scene/3d/particles.cpp
+msgid ""
+"Particles animation requires the usage of a SpatialMaterial whose Billboard "
+"Mode is set to \"Particle Billboard\"."
+msgstr ""
+
+#: scene/3d/particles.cpp
+msgid "Visibility AABB"
+msgstr ""
+
+#: scene/3d/particles.cpp
+msgid "Draw Passes"
+msgstr ""
+
+#: scene/3d/particles.cpp
+msgid "Passes"
+msgstr ""
+
+#: scene/3d/path.cpp
+msgid "PathFollow only works when set as a child of a Path node."
+msgstr ""
+
+#: scene/3d/path.cpp
+msgid ""
+"PathFollow's ROTATION_ORIENTED requires \"Up Vector\" to be enabled in its "
+"parent Path's Curve resource."
+msgstr ""
+
+#: scene/3d/path.cpp
+msgid "Rotation Mode"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid ""
+"Size changes to RigidBody (in character or rigid modes) will be overridden "
+"by the physics engine when running.\n"
+"Change the size in children collision shapes instead."
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Axis Lock"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear X"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Y"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Z"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular X"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Y"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Z"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Motion X"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Motion Y"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Motion Z"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Joint Constraints"
+msgstr ""
+
+#: scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
+msgid "Impulse Clamp"
+msgstr ""
+
+#: scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
+msgid "Swing Span"
+msgstr ""
+
+#: scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
+msgid "Twist Span"
+msgstr ""
+
+#: scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
+#: scene/3d/vehicle_body.cpp
+msgid "Relaxation"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Limit Enabled"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Limit Upper"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Limit Lower"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Limit Bias"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Limit Softness"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Limit Relaxation"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Limit Upper"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Limit Lower"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Limit Softness"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Limit Restitution"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Limit Damping"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Limit Restitution"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Limit Damping"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "X"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Y"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Z"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Limit Enabled"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Spring Enabled"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Spring Stiffness"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Spring Damping"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Equilibrium Point"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Restitution"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Linear Damping"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Restitution"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Damping"
+msgstr ""
+
+#: scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
+msgid "ERP"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Spring Enabled"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Spring Stiffness"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Spring Damping"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Angular Equilibrium Point"
+msgstr ""
+
+#: scene/3d/physics_body.cpp
+msgid "Body Offset"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Node A and Node B must be PhysicsBodies"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Node A must be a PhysicsBody"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Node B must be a PhysicsBody"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Joint is not connected to any PhysicsBodies"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Node A and Node B must be different PhysicsBodies"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Solver"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Exclude Nodes"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Params"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Limit"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Upper"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Lower"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Motor"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Target Velocity"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Max Impulse"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Limit"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Upper Distance"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Lower Distance"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Restitution"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Motion"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Ortho"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Upper Angle"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Lower Angle"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Motion"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Ortho"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Limit X"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Motor X"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Force Limit"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Spring X"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Equilibrium Point"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Limit X"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Motor X"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Spring X"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Limit Y"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Motor Y"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Spring Y"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Limit Y"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Motor Y"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Spring Y"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Limit Z"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Motor Z"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Linear Spring Z"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Limit Z"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Motor Z"
+msgstr ""
+
+#: scene/3d/physics_joint.cpp
+msgid "Angular Spring Z"
+msgstr ""
+
+#: scene/3d/portal.cpp
+msgid "The RoomManager should not be a child or grandchild of a Portal."
+msgstr ""
+
+#: scene/3d/portal.cpp
+msgid "A Room should not be a child or grandchild of a Portal."
+msgstr ""
+
+#: scene/3d/portal.cpp
+msgid "A RoomGroup should not be a child or grandchild of a Portal."
+msgstr ""
+
+#: scene/3d/portal.cpp
+msgid "Portal Active"
+msgstr ""
+
+#: scene/3d/portal.cpp scene/resources/occluder_shape_polygon.cpp
+msgid "Two Way"
+msgstr ""
+
+#: scene/3d/portal.cpp
+msgid "Linked Room"
+msgstr ""
+
+#: scene/3d/portal.cpp
+msgid "Use Default Margin"
+msgstr ""
+
+#: scene/3d/proximity_group.cpp
+msgid "Group Name"
+msgstr ""
+
+#: scene/3d/proximity_group.cpp
+msgid "Dispatch Mode"
+msgstr ""
+
+#: scene/3d/proximity_group.cpp
+msgid "Grid Radius"
+msgstr ""
+
+#: scene/3d/ray_cast.cpp
+msgid "Debug Shape"
+msgstr ""
+
+#: scene/3d/ray_cast.cpp scene/resources/style_box.cpp
+msgid "Thickness"
+msgstr ""
+
+#: scene/3d/reflection_probe.cpp scene/main/viewport.cpp
+msgid "Update Mode"
+msgstr ""
+
+#: scene/3d/reflection_probe.cpp
+msgid "Origin Offset"
+msgstr ""
+
+#: scene/3d/reflection_probe.cpp
+msgid "Box Projection"
+msgstr ""
+
+#: scene/3d/reflection_probe.cpp
+msgid "Enable Shadows"
+msgstr ""
+
+#: scene/3d/reflection_probe.cpp
+msgid "Ambient Color"
+msgstr ""
+
+#: scene/3d/reflection_probe.cpp
+msgid "Ambient Energy"
+msgstr ""
+
+#: scene/3d/reflection_probe.cpp
+msgid "Ambient Contrib"
+msgstr ""
+
+#: scene/3d/remote_transform.cpp
+msgid ""
+"The \"Remote Path\" property must point to a valid Spatial or Spatial-"
+"derived node to work."
+msgstr ""
+
+#: scene/3d/room.cpp
+msgid "A Room cannot have another Room as a child or grandchild."
+msgstr ""
+
+#: scene/3d/room.cpp
+msgid "The RoomManager should not be placed inside a Room."
+msgstr ""
+
+#: scene/3d/room.cpp
+msgid "A RoomGroup should not be placed inside a Room."
+msgstr ""
+
+#: scene/3d/room.cpp
+msgid ""
+"Room convex hull contains a large number of planes.\n"
+"Consider simplifying the room bound in order to increase performance."
+msgstr ""
+
+#: scene/3d/room.cpp
+msgid "Use Default Simplify"
+msgstr ""
+
+#: scene/3d/room.cpp scene/3d/room_manager.cpp
+msgid "Room Simplify"
+msgstr ""
+
+#: scene/3d/room.cpp
+msgid "Bound"
+msgstr ""
+
+#: scene/3d/room_group.cpp
+msgid "Roomgroup Priority"
+msgstr ""
+
+#: scene/3d/room_group.cpp
+msgid "The RoomManager should not be placed inside a RoomGroup."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "The RoomList has not been assigned."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "The RoomList node should be a Spatial (or derived from Spatial)."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid ""
+"Portal Depth Limit is set to Zero.\n"
+"Only the Room that the Camera is in will render."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "There should only be one RoomManager in the SceneTree."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Main"
+msgstr ""
+
+#: scene/3d/room_manager.cpp scene/animation/animation_blend_tree.cpp
+#: scene/animation/animation_player.cpp scene/animation/animation_tree.cpp
+#: scene/animation/animation_tree_player.cpp
+#: servers/audio/effects/audio_effect_delay.cpp
+msgid "Active"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Roomlist"
+msgstr ""
+
+#: scene/3d/room_manager.cpp servers/visual_server.cpp
+msgid "PVS"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "PVS Mode"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "PVS Filename"
+msgstr ""
+
+#: scene/3d/room_manager.cpp servers/visual_server.cpp
+msgid "Gameplay"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Gameplay Monitor"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Use Secondary PVS"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Merge Meshes"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Show Margins"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Debug Sprawl"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Overlap Warning Threshold"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Preview Camera"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Portal Depth Limit"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Default Portal Margin"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Roaming Expansion Margin"
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid ""
+"RoomList path is invalid.\n"
+"Please check the RoomList branch has been assigned in the RoomManager."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "RoomList contains no Rooms, aborting."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Misnamed nodes detected, check output log for details. Aborting."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid "Portal link room not found, check output log for details."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid ""
+"Portal autolink failed, check output log for details.\n"
+"Check the portal is facing outwards from the source room."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid ""
+"Room overlap detected, cameras may work incorrectly in overlapping area.\n"
+"Check output log for details."
+msgstr ""
+
+#: scene/3d/room_manager.cpp
+msgid ""
+"Error calculating room bounds.\n"
+"Ensure all rooms contain geometry or manual bounds."
+msgstr ""
+
+#: scene/3d/skeleton.cpp scene/resources/skin.cpp
+msgid "Pose"
+msgstr ""
+
+#: scene/3d/skeleton.cpp
+msgid "Bound Children"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Pinned Points"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Attachments"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Point Index"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Spatial Attachment Path"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Physics Enabled"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Parent Collision Ignore"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Simulation Precision"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Total Mass"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Linear Stiffness"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Areaangular Stiffness"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Volume Stiffness"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Pressure Coefficient"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Damping Coefficient"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Drag Coefficient"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "Pose Matching Coefficient"
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid "This body will be ignored until you set a mesh."
+msgstr ""
+
+#: scene/3d/soft_body.cpp
+msgid ""
+"Size changes to SoftBody will be overridden by the physics engine when "
+"running.\n"
+"Change the size in children collision shapes instead."
+msgstr ""
+
+#: scene/3d/spatial.cpp
+msgid "Global Translation"
+msgstr ""
+
+#: scene/3d/spatial.cpp
+msgid "Matrix"
+msgstr ""
+
+#: scene/3d/spatial.cpp
+msgid "Gizmo"
+msgstr ""
+
+#: scene/3d/spatial_velocity_tracker.cpp
+msgid "Track Physics Step"
+msgstr ""
+
+#: scene/3d/spring_arm.cpp
+msgid "Spring Length"
+msgstr ""
+
+#: scene/3d/sprite_3d.cpp scene/gui/graph_edit.cpp
+msgid "Opacity"
+msgstr ""
+
+#: scene/3d/sprite_3d.cpp scene/resources/material.cpp
+msgid "Transparent"
+msgstr ""
+
+#: scene/3d/sprite_3d.cpp
+msgid ""
+"A SpriteFrames resource must be created or set in the \"Frames\" property in "
+"order for AnimatedSprite3D to display frames."
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid ""
+"VehicleWheel serves to provide a wheel system to a VehicleBody. Please use "
+"it as a child of a VehicleBody."
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Per-Wheel Motion"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Engine Force"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Brake"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Steering"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "VehicleBody Motion"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Use As Traction"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Use As Steering"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Wheel"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Roll Influence"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Friction Slip"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Suspension"
+msgstr ""
+
+#: scene/3d/vehicle_body.cpp
+msgid "Max Force"
+msgstr ""
+
+#: scene/3d/visibility_notifier.cpp
+msgid "AABB"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp scene/resources/navigation_mesh.cpp
+msgid "Geometry"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Material Override"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Material Overlay"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Cast Shadow"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Extra Cull Margin"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Baked Light"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Generate Lightmap"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Lightmap Scale"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "LOD"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp scene/animation/skeleton_ik.cpp
+#: scene/resources/material.cpp
+msgid "Min Distance"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Min Hysteresis"
+msgstr ""
+
+#: scene/3d/visual_instance.cpp
+msgid "Max Hysteresis"
+msgstr ""
+
+#: scene/3d/world_environment.cpp
+msgid ""
+"WorldEnvironment requires its \"Environment\" property to contain an "
+"Environment to have a visible effect."
+msgstr ""
+
+#: scene/3d/world_environment.cpp
+msgid ""
+"Only one WorldEnvironment is allowed per scene (or set of instanced scenes)."
+msgstr ""
+
+#: scene/3d/world_environment.cpp
+msgid ""
+"This WorldEnvironment is ignored. Either add a Camera (for 3D scenes) or set "
+"this environment's Background Mode to Canvas (for 2D scenes)."
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "On BlendTree node '%s', animation not found: '%s'"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Animation not found: '%s'"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Mix Mode"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Fadein Time"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Fadeout Time"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Auto Restart"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Autorestart"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Delay"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Random Delay"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Add Amount"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Blend Amount"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Seek Position"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+msgid "Input Count"
+msgstr ""
+
+#: scene/animation/animation_blend_tree.cpp
+#: scene/animation/animation_node_state_machine.cpp
+msgid "Xfade Time"
+msgstr ""
+
+#: scene/animation/animation_node_state_machine.cpp
+msgid "Switch Mode"
+msgstr ""
+
+#: scene/animation/animation_node_state_machine.cpp
+msgid "Auto Advance"
+msgstr ""
+
+#: scene/animation/animation_node_state_machine.cpp
+msgid "Advance Condition"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Anim Apply Reset"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Current Animation"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Assigned Animation"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Reset On Save"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Current Animation Length"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Current Animation Position"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Playback Options"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Default Blend Time"
+msgstr ""
+
+#: scene/animation/animation_player.cpp
+msgid "Method Call Mode"
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "In node '%s', invalid animation: '%s'."
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "Invalid animation: '%s'."
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "Nothing connected to input '%s' of node '%s'."
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "No root AnimationNode for the graph is set."
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "Path to an AnimationPlayer node containing animations is not set."
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "Path set for AnimationPlayer does not lead to an AnimationPlayer node."
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "The AnimationPlayer root node is not a valid node."
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "Tree Root"
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "Anim Player"
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "Root Motion"
+msgstr ""
+
+#: scene/animation/animation_tree.cpp
+msgid "Track"
+msgstr ""
+
+#: scene/animation/animation_tree_player.cpp
+msgid "This node has been deprecated. Use AnimationTree instead."
+msgstr ""
+
+#: scene/animation/animation_tree_player.cpp
+msgid "Playback"
+msgstr ""
+
+#: scene/animation/animation_tree_player.cpp
+msgid "Master Player"
+msgstr ""
+
+#: scene/animation/animation_tree_player.cpp
+msgid "Base Path"
+msgstr ""
+
+#: scene/animation/root_motion_view.cpp
+msgid "Animation Path"
+msgstr ""
+
+#: scene/animation/root_motion_view.cpp
+msgid "Zero Y"
+msgstr ""
+
+#: scene/animation/skeleton_ik.cpp
+msgid "Root Bone"
+msgstr ""
+
+#: scene/animation/skeleton_ik.cpp
+msgid "Tip Bone"
+msgstr ""
+
+#: scene/animation/skeleton_ik.cpp
+msgid "Interpolation"
+msgstr ""
+
+#: scene/animation/skeleton_ik.cpp
+msgid "Override Tip Basis"
+msgstr ""
+
+#: scene/animation/skeleton_ik.cpp
+msgid "Use Magnet"
+msgstr ""
+
+#: scene/animation/skeleton_ik.cpp
+msgid "Magnet"
+msgstr ""
+
+#: scene/animation/skeleton_ik.cpp
+msgid "Target Node"
+msgstr ""
+
+#: scene/animation/skeleton_ik.cpp
+msgid "Max Iterations"
+msgstr ""
+
+#: scene/animation/tween.cpp
+msgid "Playback Process Mode"
+msgstr ""
+
+#: scene/animation/tween.cpp
+msgid "Playback Speed"
+msgstr ""
+
+#: scene/audio/audio_stream_player.cpp
+msgid "Mix Target"
+msgstr ""
+
+#: scene/gui/aspect_ratio_container.cpp scene/gui/range.cpp
+#: servers/audio/effects/audio_effect_compressor.cpp
+msgid "Ratio"
+msgstr ""
+
+#: scene/gui/aspect_ratio_container.cpp scene/gui/texture_button.cpp
+#: scene/gui/texture_rect.cpp
+msgid "Stretch Mode"
+msgstr ""
+
+#: scene/gui/aspect_ratio_container.cpp scene/gui/box_container.cpp
+msgid "Alignment"
+msgstr ""
+
+#: scene/gui/base_button.cpp
+msgid "Shortcut In Tooltip"
+msgstr ""
+
+#: scene/gui/base_button.cpp
+msgid "Action Mode"
+msgstr ""
+
+#: scene/gui/base_button.cpp
+msgid "Enabled Focus Mode"
+msgstr ""
+
+#: scene/gui/base_button.cpp
+msgid "Keep Pressed Outside"
+msgstr ""
+
+#: scene/gui/base_button.cpp scene/gui/shortcut.cpp
+msgid "Shortcut"
+msgstr ""
+
+#: scene/gui/base_button.cpp
+msgid "Group"
+msgstr ""
+
+#: scene/gui/button.cpp scene/gui/label.cpp
+msgid "Clip Text"
+msgstr ""
+
+#: scene/gui/button.cpp scene/gui/label.cpp scene/gui/line_edit.cpp
+#: scene/gui/spin_box.cpp
+msgid "Align"
+msgstr ""
+
+#: scene/gui/button.cpp
+msgid "Icon Align"
+msgstr ""
+
+#: scene/gui/button.cpp
+msgid "Expand Icon"
+msgstr ""
+
+#: scene/gui/center_container.cpp
+msgid "Use Top Left"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid ""
+"Color: #%s\n"
+"LMB: Apply color\n"
+"RMB: Remove preset"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "Edit Alpha"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "HSV Mode"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "Raw Mode"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "Deferred Mode"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "Presets Enabled"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "Presets Visible"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "Pick a color from the editor window."
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "HSV"
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "Switch between hexadecimal and code values."
+msgstr ""
+
+#: scene/gui/color_picker.cpp
+msgid "Add current color as a preset."
+msgstr ""
+
+#: scene/gui/container.cpp
+msgid ""
+"Container by itself serves no purpose unless a script configures its "
+"children placement behavior.\n"
+"If you don't intend to add a script, use a plain Control node instead."
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Theme Overrides"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid ""
+"The Hint Tooltip won't be displayed as the control's Mouse Filter is set to "
+"\"Ignore\". To solve this, set the Mouse Filter to \"Stop\" or \"Pass\"."
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Anchor"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Grow Direction"
+msgstr ""
+
+#: scene/gui/control.cpp scene/resources/navigation_mesh.cpp
+msgid "Min Size"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Pivot Offset"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Clip Content"
+msgstr ""
+
+#: scene/gui/control.cpp scene/resources/visual_shader_nodes.cpp
+msgid "Hint"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Tooltip"
+msgstr ""
+
+#: scene/gui/control.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Focus"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Neighbour Left"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Neighbour Top"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Neighbour Right"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Neighbour Bottom"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Next"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Previous"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Mouse"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Default Cursor Shape"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Pass On Modal Close Click"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Size Flags"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Stretch Ratio"
+msgstr ""
+
+#: scene/gui/control.cpp
+msgid "Theme Type Variation"
+msgstr ""
+
+#: scene/gui/dialogs.cpp
+msgid "Window Title"
+msgstr ""
+
+#: scene/gui/dialogs.cpp
+msgid "Dialog"
+msgstr ""
+
+#: scene/gui/dialogs.cpp
+msgid "Hide On OK"
+msgstr ""
+
+#: scene/gui/dialogs.cpp
+msgid "Alert!"
+msgstr ""
+
+#: scene/gui/dialogs.cpp
+msgid "Please Confirm..."
+msgstr ""
+
+#: scene/gui/file_dialog.cpp
+msgid "Mode Overrides Title"
+msgstr ""
+
+#: scene/gui/file_dialog.cpp
+msgid "Must use a valid extension."
+msgstr ""
+
+#: scene/gui/graph_edit.cpp
+msgid "Right Disconnects"
+msgstr ""
+
+#: scene/gui/graph_edit.cpp
+msgid "Scroll Offset"
+msgstr ""
+
+#: scene/gui/graph_edit.cpp
+msgid "Snap Distance"
+msgstr ""
+
+#: scene/gui/graph_edit.cpp
+msgid "Zoom Min"
+msgstr ""
+
+#: scene/gui/graph_edit.cpp
+msgid "Zoom Max"
+msgstr ""
+
+#: scene/gui/graph_edit.cpp
+msgid "Zoom Step"
+msgstr ""
+
+#: scene/gui/graph_edit.cpp
+msgid "Show Zoom Label"
+msgstr ""
+
+#: scene/gui/graph_edit.cpp scene/gui/text_edit.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Minimap"
+msgstr ""
+
+#: scene/gui/graph_edit.cpp
+msgid "Enable grid minimap."
+msgstr ""
+
+#: scene/gui/graph_node.cpp
+msgid "Show Close"
+msgstr ""
+
+#: scene/gui/graph_node.cpp scene/gui/option_button.cpp
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Selected"
+msgstr ""
+
+#: scene/gui/graph_node.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Comment"
+msgstr ""
+
+#: scene/gui/graph_node.cpp
+msgid "Overlay"
+msgstr ""
+
+#: scene/gui/grid_container.cpp scene/gui/item_list.cpp scene/gui/tree.cpp
+msgid "Columns"
+msgstr ""
+
+#: scene/gui/item_list.cpp scene/gui/popup_menu.cpp scene/gui/text_edit.cpp
+#: scene/gui/tree.cpp scene/main/viewport.cpp
+msgid "Timers"
+msgstr ""
+
+#: scene/gui/item_list.cpp scene/gui/popup_menu.cpp scene/gui/tree.cpp
+msgid "Incremental Search Max Interval Msec"
+msgstr ""
+
+#: scene/gui/item_list.cpp scene/gui/tree.cpp
+msgid "Allow Reselect"
+msgstr ""
+
+#: scene/gui/item_list.cpp scene/gui/tree.cpp
+msgid "Allow RMB Select"
+msgstr ""
+
+#: scene/gui/item_list.cpp
+msgid "Max Text Lines"
+msgstr ""
+
+#: scene/gui/item_list.cpp
+msgid "Auto Height"
+msgstr ""
+
+#: scene/gui/item_list.cpp
+msgid "Max Columns"
+msgstr ""
+
+#: scene/gui/item_list.cpp
+msgid "Same Column Width"
+msgstr ""
+
+#: scene/gui/item_list.cpp
+msgid "Fixed Column Width"
+msgstr ""
+
+#: scene/gui/item_list.cpp
+msgid "Icon Scale"
+msgstr ""
+
+#: scene/gui/item_list.cpp
+msgid "Fixed Icon Size"
+msgstr ""
+
+#: scene/gui/label.cpp
+msgid "V Align"
+msgstr ""
+
+#: scene/gui/label.cpp scene/gui/rich_text_label.cpp
+msgid "Visible Characters"
+msgstr ""
+
+#: scene/gui/label.cpp scene/gui/rich_text_label.cpp
+msgid "Percent Visible"
+msgstr ""
+
+#: scene/gui/label.cpp
+msgid "Lines Skipped"
+msgstr ""
+
+#: scene/gui/label.cpp
+msgid "Max Lines Visible"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/resources/navigation_mesh.cpp
+msgid "Max Length"
+msgstr ""
+
+#: scene/gui/line_edit.cpp
+msgid "Secret"
+msgstr ""
+
+#: scene/gui/line_edit.cpp
+msgid "Secret Character"
+msgstr ""
+
+#: scene/gui/line_edit.cpp
+msgid "Expand To Text Length"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Context Menu Enabled"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Virtual Keyboard Enabled"
+msgstr ""
+
+#: scene/gui/line_edit.cpp
+msgid "Clear Button Enabled"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Shortcut Keys Enabled"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Middle Mouse Paste Enabled"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Selecting Enabled"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/rich_text_label.cpp
+#: scene/gui/text_edit.cpp
+msgid "Deselect On Focus Loss Enabled"
+msgstr ""
+
+#: scene/gui/line_edit.cpp
+msgid "Right Icon"
+msgstr ""
+
+#: scene/gui/line_edit.cpp
+msgid "Placeholder"
+msgstr ""
+
+#: scene/gui/line_edit.cpp
+msgid "Alpha"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Caret"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Blink"
+msgstr ""
+
+#: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
+msgid "Blink Speed"
+msgstr ""
+
+#: scene/gui/link_button.cpp
+msgid "Underline"
+msgstr ""
+
+#: scene/gui/menu_button.cpp
+msgid "Switch On Hover"
+msgstr ""
+
+#: scene/gui/nine_patch_rect.cpp scene/resources/style_box.cpp
+msgid "Draw Center"
+msgstr ""
+
+#: scene/gui/nine_patch_rect.cpp scene/resources/style_box.cpp
+msgid "Region Rect"
+msgstr ""
+
+#: scene/gui/nine_patch_rect.cpp
+msgid "Patch Margin"
+msgstr ""
+
+#: scene/gui/nine_patch_rect.cpp scene/resources/style_box.cpp
+msgid "Axis Stretch"
+msgstr ""
+
+#: scene/gui/nine_patch_rect.cpp
+msgid ""
+"The Tile and Tile Fit options for Axis Stretch properties are only effective "
+"when using the GLES3 rendering backend.\n"
+"The GLES2 backend is currently in use, so these modes will act like Stretch "
+"instead."
+msgstr ""
+
+#: scene/gui/popup.cpp
+msgid "Popup"
+msgstr ""
+
+#: scene/gui/popup.cpp
+msgid "Exclusive"
+msgstr ""
+
+#: scene/gui/popup.cpp
+msgid ""
+"Popups will hide by default unless you call popup() or any of the popup*() "
+"functions. Making them visible for editing is fine, but they will hide upon "
+"running."
+msgstr ""
+
+#: scene/gui/popup_menu.cpp
+msgid "Hide On Item Selection"
+msgstr ""
+
+#: scene/gui/popup_menu.cpp
+msgid "Hide On Checkable Item Selection"
+msgstr ""
+
+#: scene/gui/popup_menu.cpp
+msgid "Hide On State Item Selection"
+msgstr ""
+
+#: scene/gui/popup_menu.cpp
+msgid "Submenu Popup Delay"
+msgstr ""
+
+#: scene/gui/popup_menu.cpp
+msgid "Allow Search"
+msgstr ""
+
+#: scene/gui/progress_bar.cpp
+msgid "Percent"
+msgstr ""
+
+#: scene/gui/range.cpp
+msgid "If \"Exp Edit\" is enabled, \"Min Value\" must be greater than 0."
+msgstr ""
+
+#: scene/gui/range.cpp scene/resources/curve.cpp
+msgid "Min Value"
+msgstr ""
+
+#: scene/gui/range.cpp scene/resources/curve.cpp
+msgid "Max Value"
+msgstr ""
+
+#: scene/gui/range.cpp
+msgid "Page"
+msgstr ""
+
+#: scene/gui/range.cpp
+msgid "Exp Edit"
+msgstr ""
+
+#: scene/gui/range.cpp
+msgid "Rounded"
+msgstr ""
+
+#: scene/gui/range.cpp
+msgid "Allow Greater"
+msgstr ""
+
+#: scene/gui/range.cpp
+msgid "Allow Lesser"
+msgstr ""
+
+#: scene/gui/reference_rect.cpp
+msgid "Border Color"
+msgstr ""
+
+#: scene/gui/reference_rect.cpp scene/resources/style_box.cpp
+msgid "Border Width"
+msgstr ""
+
+#: scene/gui/rich_text_effect.cpp
+msgid "Relative Index"
+msgstr ""
+
+#: scene/gui/rich_text_effect.cpp
+msgid "Absolute Index"
+msgstr ""
+
+#: scene/gui/rich_text_effect.cpp
+msgid "Elapsed Time"
+msgstr ""
+
+#: scene/gui/rich_text_effect.cpp
+msgid "Env"
+msgstr ""
+
+#: scene/gui/rich_text_effect.cpp
+msgid "Character"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp
+msgid "BBCode"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp
+msgid "Meta Underlined"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp
+msgid "Tab Size"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp
+msgid "Fit Content Height"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp
+msgid "Scroll Active"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp
+msgid "Scroll Following"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp
+msgid "Selection Enabled"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp scene/gui/text_edit.cpp
+msgid "Override Selected Font Color"
+msgstr ""
+
+#: scene/gui/rich_text_label.cpp
+msgid "Custom Effects"
+msgstr ""
+
+#: scene/gui/scroll_bar.cpp
+msgid "Custom Step"
+msgstr ""
+
+#: scene/gui/scroll_container.cpp
+msgid ""
+"ScrollContainer is intended to work with a single child control.\n"
+"Use a container as child (VBox, HBox, etc.), or a Control and set the custom "
+"minimum size manually."
+msgstr ""
+
+#: scene/gui/scroll_container.cpp
+msgid "Follow Focus"
+msgstr ""
+
+#: scene/gui/scroll_container.cpp
+msgid "Horizontal Enabled"
+msgstr ""
+
+#: scene/gui/scroll_container.cpp
+msgid "Vertical Enabled"
+msgstr ""
+
+#: scene/gui/scroll_container.cpp
+msgid "Default Scroll Deadzone"
+msgstr ""
+
+#: scene/gui/slider.cpp
+msgid "Scrollable"
+msgstr ""
+
+#: scene/gui/slider.cpp
+msgid "Tick Count"
+msgstr ""
+
+#: scene/gui/slider.cpp
+msgid "Ticks On Borders"
+msgstr ""
+
+#: scene/gui/spin_box.cpp
+msgid "Prefix"
+msgstr ""
+
+#: scene/gui/spin_box.cpp
+msgid "Suffix"
+msgstr ""
+
+#: scene/gui/split_container.cpp
+msgid "Split Offset"
+msgstr ""
+
+#: scene/gui/split_container.cpp scene/gui/tree.cpp
+msgid "Collapsed"
+msgstr ""
+
+#: scene/gui/split_container.cpp
+msgid "Dragger Visibility"
+msgstr ""
+
+#: scene/gui/tab_container.cpp scene/gui/tabs.cpp
+msgid "Tab Align"
+msgstr ""
+
+#: scene/gui/tab_container.cpp scene/gui/tabs.cpp
+msgid "Current Tab"
+msgstr ""
+
+#: scene/gui/tab_container.cpp
+msgid "Tabs Visible"
+msgstr ""
+
+#: scene/gui/tab_container.cpp
+msgid "All Tabs In Front"
+msgstr ""
+
+#: scene/gui/tab_container.cpp scene/gui/tabs.cpp
+msgid "Drag To Rearrange Enabled"
+msgstr ""
+
+#: scene/gui/tab_container.cpp
+msgid "Use Hidden Tabs For Min Size"
+msgstr ""
+
+#: scene/gui/tabs.cpp
+msgid "Tab Close Display Policy"
+msgstr ""
+
+#: scene/gui/tabs.cpp
+msgid "Scrolling Enabled"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Readonly"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Bookmark Gutter"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Breakpoint Gutter"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Fold Gutter"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Drag And Drop Selection Enabled"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Hiding Enabled"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Wrap Enabled"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Scroll Vertical"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Scroll Horizontal"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Draw"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Block Mode"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Moving By Right Click"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Text Edit Idle Detect (sec)"
+msgstr ""
+
+#: scene/gui/text_edit.cpp
+msgid "Text Edit Undo Stack Max Size"
+msgstr ""
+
+#: scene/gui/texture_button.cpp scene/resources/default_theme/default_theme.cpp
+msgid "Hover"
+msgstr ""
+
+#: scene/gui/texture_button.cpp
+msgid "Focused"
+msgstr ""
+
+#: scene/gui/texture_button.cpp
+msgid "Click Mask"
+msgstr ""
+
+#: scene/gui/texture_button.cpp scene/gui/texture_rect.cpp
+#: scene/gui/video_player.cpp
+msgid "Expand"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Under"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Over"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Progress"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Progress Offset"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Fill Mode"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp scene/resources/material.cpp
+msgid "Tint"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Radial Fill"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Initial Angle"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Fill Degrees"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp scene/resources/primitive_meshes.cpp
+msgid "Center Offset"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Nine Patch Stretch"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Stretch Margin Left"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Stretch Margin Top"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Stretch Margin Right"
+msgstr ""
+
+#: scene/gui/texture_progress.cpp
+msgid "Stretch Margin Bottom"
+msgstr ""
+
+#: scene/gui/tree.cpp
+msgid "Custom Minimum Height"
+msgstr ""
+
+#: scene/gui/tree.cpp
+msgid "(Other)"
+msgstr ""
+
+#: scene/gui/tree.cpp
+msgid "Column Titles Visible"
+msgstr ""
+
+#: scene/gui/tree.cpp
+msgid "Hide Folding"
+msgstr ""
+
+#: scene/gui/tree.cpp
+msgid "Hide Root"
+msgstr ""
+
+#: scene/gui/tree.cpp
+msgid "Drop Mode Flags"
+msgstr ""
+
+#: scene/gui/video_player.cpp
+msgid "Audio Track"
+msgstr ""
+
+#: scene/gui/video_player.cpp scene/main/scene_tree.cpp scene/main/timer.cpp
+msgid "Paused"
+msgstr ""
+
+#: scene/gui/video_player.cpp
+msgid "Buffering Msec"
+msgstr ""
+
+#: scene/gui/video_player.cpp
+msgid "Stream Position"
+msgstr ""
+
+#: scene/gui/viewport_container.cpp
+msgid "Stretch Shrink"
+msgstr ""
+
+#: scene/main/canvas_layer.cpp
+msgid "Follow Viewport"
+msgstr ""
+
+#: scene/main/http_request.cpp
+msgid "Download File"
+msgstr ""
+
+#: scene/main/http_request.cpp
+msgid "Download Chunk Size"
+msgstr ""
+
+#: scene/main/http_request.cpp
+msgid "Body Size Limit"
+msgstr ""
+
+#: scene/main/http_request.cpp
+msgid "Max Redirects"
+msgstr ""
+
+#: scene/main/http_request.cpp
+msgid "Timeout"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid ""
+"Setting node name '%s' to be unique within scene for '%s', but it's already "
+"claimed by '%s'. This node is no longer set unique."
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Name Num Separator"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Name Casing"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Editor Description"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Pause Mode"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Physics Interpolation Mode"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Display Folded"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Filename"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Owner"
+msgstr ""
+
+#: scene/main/node.cpp scene/main/scene_tree.cpp
+msgid "Multiplayer"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Custom Multiplayer"
+msgstr ""
+
+#: scene/main/node.cpp
+msgid "Process Priority"
+msgstr ""
+
+#: scene/main/scene_tree.cpp scene/main/timer.cpp
+msgid "Time Left"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Debug Collisions Hint"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Debug Navigation Hint"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Use Font Oversampling"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Edited Scene Root"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Root"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Multiplayer Poll"
+msgstr ""
+
+#: scene/main/scene_tree.cpp scene/resources/mesh_library.cpp
+#: scene/resources/shape_2d.cpp
+msgid "Shapes"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Shape Color"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Contact Color"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Geometry Color"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Disabled Geometry Color"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Max Contacts Displayed"
+msgstr ""
+
+#: scene/main/scene_tree.cpp scene/resources/shape_2d.cpp
+msgid "Draw 2D Outlines"
+msgstr ""
+
+#: scene/main/scene_tree.cpp servers/visual_server.cpp
+msgid "Reflections"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Atlas Size"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Atlas Subdiv"
+msgstr ""
+
+#: scene/main/scene_tree.cpp scene/main/viewport.cpp
+msgid "MSAA"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Use FXAA"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Use Debanding"
+msgstr ""
+
+#: scene/main/scene_tree.cpp scene/main/viewport.cpp
+msgid "HDR"
+msgstr ""
+
+#: scene/main/scene_tree.cpp scene/main/viewport.cpp
+msgid "Use 32 BPC Depth"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Default Environment"
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid ""
+"Default Environment as specified in Project Settings (Rendering -> "
+"Environment -> Default Environment) could not be loaded."
+msgstr ""
+
+#: scene/main/scene_tree.cpp
+msgid "Enable Object Picking"
+msgstr ""
+
+#: scene/main/timer.cpp
+msgid ""
+"Very low timer wait times (< 0.05 seconds) may behave in significantly "
+"different ways depending on the rendered or physics frame rate.\n"
+"Consider using a script's process loop instead of relying on a Timer for "
+"very low wait times."
+msgstr ""
+
+#: scene/main/timer.cpp
+msgid "Autostart"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Viewport Path"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid ""
+"The Viewport size must be greater than or equal to 2 pixels on both "
+"dimensions to render anything."
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid ""
+"This Viewport has HDR enabled, but its Usage is set to 2D or 2D No-"
+"Sampling.\n"
+"HDR is only supported in Viewports that have their Usage set to 3D or 3D No-"
+"Effects.\n"
+"HDR will be disabled for this Viewport."
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "ARVR"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Size Override Stretch"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Own World"
+msgstr ""
+
+#: scene/main/viewport.cpp scene/resources/world_2d.cpp
+msgid "World"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "World 2D"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Transparent BG"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Handle Input Locally"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "FXAA"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Debanding"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Disable 3D"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Keep 3D Linear"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Render Direct To Screen"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Debug Draw"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Render Target"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "V Flip"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Clear Mode"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Enable 2D"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Enable 3D"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Object Picking"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Disable Input"
+msgstr ""
+
+#: scene/main/viewport.cpp servers/visual_server.cpp
+msgid "Shadow Atlas"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Quad 0"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Quad 1"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Quad 2"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Quad 3"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Canvas Transform"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Global Canvas Transform"
+msgstr ""
+
+#: scene/main/viewport.cpp
+msgid "Tooltip Delay (sec)"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "Swap OK Cancel"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "Layer Names"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "2D Render"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "3D Render"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "2D Physics"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "3D Physics"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "2D Navigation"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "3D Navigation"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "Use hiDPI"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "Custom"
+msgstr ""
+
+#: scene/register_scene_types.cpp
+msgid "Custom Font"
+msgstr ""
+
+#: scene/resources/audio_stream_sample.cpp
+#: servers/audio/effects/audio_stream_generator.cpp servers/audio_server.cpp
+msgid "Mix Rate"
+msgstr ""
+
+#: scene/resources/audio_stream_sample.cpp
+msgid "Stereo"
+msgstr ""
+
+#: scene/resources/concave_polygon_shape_2d.cpp
+msgid "Segments"
+msgstr ""
+
+#: scene/resources/curve.cpp
+msgid "Bake Resolution"
+msgstr ""
+
+#: scene/resources/curve.cpp
+msgid "Bake Interval"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Panel"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Hover"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Focus"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "H Separation"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Underline Spacing"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Arrow"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Arrow Margin"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Hover Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Checked Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Unchecked"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Unchecked Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Radio Checked"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Radio Checked Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Radio Unchecked"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Radio Unchecked Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Hover Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Check V Adjust"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "On Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Off"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Off Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Shadow"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Outline Modulate"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Shadow Offset X"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Shadow Offset Y"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Shadow As Outline"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Selected"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Uneditable"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Cursor Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Clear Button Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Clear Button Color Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Minimum Spaces"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "BG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "FG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Tab"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+#: scene/resources/dynamic_font.cpp scene/resources/world.cpp
+#: scene/resources/world_2d.cpp
+msgid "Space"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Folded"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Fold"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Readonly"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Completion Lines"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Completion Max Width"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Completion Scroll Width"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Scroll Focus"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Grabber"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Grabber Highlight"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Grabber Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Increment"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Increment Highlight"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Increment Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Decrement"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Decrement Highlight"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Decrement Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Slider"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Grabber Area"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Grabber Area Highlight"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Grabber Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Tick"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Updown"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Scaleborder Size"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Font"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Height"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Close Highlight"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Close H Offset"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Close V Offset"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Parent Folder"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Toggle Hidden"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Panel Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Labeled Separator Left"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Labeled Separator Right"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Separator"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Accel"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color Separator"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "V Separation"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Selected Frame"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Default Frame"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Default Focus"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Comment Focus"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Breakpoint"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Resizer"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Close Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Resizer Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Offset"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Close Offset"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Port Offset"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "BG Focus"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Selected Focus"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Cursor Unfocused"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Button Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Button Normal"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Button Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Button Hover"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Custom Button"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Custom Button Pressed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Custom Button Hover"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Select Arrow"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Arrow Collapsed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Button Font"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Title Button Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Guide Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Drop Position Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Relationship Line Color"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Custom Button Font Highlight"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Item Margin"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Button Margin"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Draw Relationship Lines"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Draw Guides"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Scroll Border"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Scroll Speed"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Icon Margin"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Line Separation"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Tab FG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Tab BG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Tab Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Menu"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Menu Highlight"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color FG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Font Color BG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Side Margin"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Top Margin"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Label V Align FG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Label V Align BG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Large"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Folder"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Folder Icon Modulate"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "File Icon Modulate"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Files Disabled"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "SV Width"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "SV Height"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "H Width"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Label Width"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Screen Picker"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Add Preset"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Color Hue"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Color Sample"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Preset BG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Overbright Indicator"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Preset FG"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Preset BG Icon"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Normal Font"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Bold Font"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Italics Font"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Bold Italics Font"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Mono Font"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Table H Separation"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Table V Separation"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Margin Left"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Margin Top"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Margin Right"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Margin Bottom"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Autohide"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Minus"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "More"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Grid Minor"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Grid Major"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Selection Fill"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Selection Stroke"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Activity"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Bezier Len Pos"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Bezier Len Neg"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Port Grab Distance Horizontal"
+msgstr ""
+
+#: scene/resources/default_theme/default_theme.cpp
+msgid "Port Grab Distance Vertical"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Hinting"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Override Oversampling"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Font Path"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Outline Size"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Outline Color"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Use Mipmaps"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Extra Spacing"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Char"
+msgstr ""
+
+#: scene/resources/dynamic_font.cpp
+msgid "Font Data"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Background"
+msgstr ""
+
+#: scene/resources/environment.cpp scene/resources/sky.cpp
+msgid "Sky"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Sky Custom FOV"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Sky Orientation"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Sky Rotation"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Sky Rotation Degrees"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Canvas Max Layer"
+msgstr ""
+
+#: scene/resources/environment.cpp scene/resources/texture.cpp
+msgid "Camera Feed ID"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Ambient Light"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Sky Contribution"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Fog"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Sun Color"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Sun Amount"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Depth Enabled"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Depth Begin"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Depth End"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Depth Curve"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Transmit Enabled"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Transmit Curve"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Height Enabled"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Height Min"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Height Max"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Height Curve"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Tonemap"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Exposure"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "White"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Auto Exposure"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Min Luma"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Max Luma"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "SS Reflections"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Max Steps"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Fade In"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Fade Out"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Depth Tolerance"
+msgstr ""
+
+#: scene/resources/environment.cpp scene/resources/material.cpp
+msgid "Roughness"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "SSAO"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Radius 2"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Intensity 2"
+msgstr ""
+
+#: scene/resources/environment.cpp scene/resources/material.cpp
+msgid "Light Affect"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "AO Channel Affect"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Blur"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Edge Sharpness"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "DOF Far Blur"
+msgstr ""
+
+#: scene/resources/environment.cpp scene/resources/material.cpp
+msgid "Distance"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Transition"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "DOF Near Blur"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Glow"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Levels"
+msgstr ""
+
+#: scene/resources/environment.cpp
+#: servers/audio/effects/audio_effect_chorus.cpp
+msgid "1"
+msgstr ""
+
+#: scene/resources/environment.cpp
+#: servers/audio/effects/audio_effect_chorus.cpp
+msgid "2"
+msgstr ""
+
+#: scene/resources/environment.cpp
+#: servers/audio/effects/audio_effect_chorus.cpp
+msgid "3"
+msgstr ""
+
+#: scene/resources/environment.cpp
+#: servers/audio/effects/audio_effect_chorus.cpp
+msgid "4"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "5"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "6"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "7"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Bloom"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "HDR Threshold"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "HDR Luminance Cap"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "HDR Scale"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Bicubic Upscale"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Adjustments"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Brightness"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Saturation"
+msgstr ""
+
+#: scene/resources/environment.cpp
+msgid "Color Correction"
+msgstr ""
+
+#: scene/resources/font.cpp
+msgid "Ascent"
+msgstr ""
+
+#: scene/resources/font.cpp
+msgid "Distance Field"
+msgstr ""
+
+#: scene/resources/gradient.cpp
+msgid "Raw Data"
+msgstr ""
+
+#: scene/resources/gradient.cpp
+msgid "Offsets"
+msgstr ""
+
+#: scene/resources/height_map_shape.cpp
+msgid "Map Width"
+msgstr ""
+
+#: scene/resources/height_map_shape.cpp
+msgid "Map Depth"
+msgstr ""
+
+#: scene/resources/height_map_shape.cpp
+msgid "Map Data"
+msgstr ""
+
+#: scene/resources/line_shape_2d.cpp
+msgid "D"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Next Pass"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Use Shadow To Opacity"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Unshaded"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Vertex Lighting"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Use Point Size"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "World Triplanar"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Albedo Tex Force sRGB"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Do Not Receive Shadows"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Disable Ambient Light"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Ensure Correct Normals"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Albedo Tex MSDF"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Vertex Color"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Use As Albedo"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Is sRGB"
+msgstr ""
+
+#: scene/resources/material.cpp servers/visual_server.cpp
+msgid "Parameters"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Diffuse Mode"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Specular Mode"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Depth Draw Mode"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Line Width"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Point Size"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Billboard Mode"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Billboard Keep Scale"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Grow"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Grow Amount"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Use Alpha Scissor"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Particles Anim"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "H Frames"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "V Frames"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Albedo"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Metallic"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Texture Channel"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Emission"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "On UV2"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "NormalMap"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Rim"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Clearcoat"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Gloss"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Anisotropy"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Flowmap"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Ambient Occlusion"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Deep Parallax"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Min Layers"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Max Layers"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Flip Tangent"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Flip Binormal"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Subsurf Scatter"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Transmission"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Refraction"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Detail"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "UV Layer"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "UV1"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Triplanar"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Triplanar Sharpness"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "UV2"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Proximity Fade"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Distance Fade"
+msgstr ""
+
+#: scene/resources/material.cpp
+msgid "Async Mode"
+msgstr ""
+
+#: scene/resources/mesh.cpp
+msgid "Lightmap Size Hint"
+msgstr ""
+
+#: scene/resources/mesh.cpp scene/resources/primitive_meshes.cpp
+msgid "Custom AABB"
+msgstr ""
+
+#: scene/resources/mesh_library.cpp
+msgid "Mesh Transform"
+msgstr ""
+
+#: scene/resources/mesh_library.cpp
+msgid "NavMesh Transform"
+msgstr ""
+
+#: scene/resources/multimesh.cpp
+msgid "Color Format"
+msgstr ""
+
+#: scene/resources/multimesh.cpp
+msgid "Transform Format"
+msgstr ""
+
+#: scene/resources/multimesh.cpp
+msgid "Custom Data Format"
+msgstr ""
+
+#: scene/resources/multimesh.cpp
+msgid "Instance Count"
+msgstr ""
+
+#: scene/resources/multimesh.cpp
+msgid "Visible Instance Count"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Sampling"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Partition Type"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Parsed Geometry Type"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Source Geometry Mode"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Source Group Name"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Cells"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Agents"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Max Climb"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Max Slope"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Regions"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Merge Size"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Edges"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Max Error"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Verts Per Poly"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Details"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Sample Distance"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Sample Max Error"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Low Hanging Obstacles"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Ledge Spans"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Walkable Low Height Spans"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Baking AABB"
+msgstr ""
+
+#: scene/resources/navigation_mesh.cpp
+msgid "Baking AABB Offset"
+msgstr ""
+
+#: scene/resources/occluder_shape.cpp
+msgid "Spheres"
+msgstr ""
+
+#: scene/resources/occluder_shape.cpp
+msgid "OccluderShapeSphere Set Spheres"
+msgstr ""
+
+#: scene/resources/occluder_shape_polygon.cpp
+msgid "Polygon Points"
+msgstr ""
+
+#: scene/resources/occluder_shape_polygon.cpp
+msgid "Hole Points"
+msgstr ""
+
+#: scene/resources/packed_scene.cpp
+msgid "Bundled"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Trail"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Divisor"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Size Modifier"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Color Modifier"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Point Texture"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Normal Texture"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Color Texture"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Point Count"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Scale Random"
+msgstr ""
+
+#: scene/resources/particles_material.cpp
+msgid "Scale Curve"
+msgstr ""
+
+#: scene/resources/physics_material.cpp
+msgid "Rough"
+msgstr ""
+
+#: scene/resources/physics_material.cpp
+msgid "Absorbent"
+msgstr ""
+
+#: scene/resources/plane_shape.cpp
+msgid "Plane"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Flip Faces"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Mid Height"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Subdivide Width"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Subdivide Height"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Subdivide Depth"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Top Radius"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Bottom Radius"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Left To Right"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Is Hemisphere"
+msgstr ""
+
+#: scene/resources/primitive_meshes.cpp
+msgid "Curve Step"
+msgstr ""
+
+#: scene/resources/ray_shape.cpp scene/resources/segment_shape_2d.cpp
+msgid "Slips On Slope"
+msgstr ""
+
+#: scene/resources/segment_shape_2d.cpp
+msgid "A"
+msgstr ""
+
+#: scene/resources/shape_2d.cpp
+msgid "Custom Solver Bias"
+msgstr ""
+
+#: scene/resources/skin.cpp
+msgid "Bind Count"
+msgstr ""
+
+#: scene/resources/skin.cpp
+msgid "Bind"
+msgstr ""
+
+#: scene/resources/skin.cpp
+msgid "Bone"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Radiance Size"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Panorama"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Top Color"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Horizon Color"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Ground"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Bottom Color"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Sun"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Latitude"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Longitude"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Angle Min"
+msgstr ""
+
+#: scene/resources/sky.cpp
+msgid "Angle Max"
+msgstr ""
+
+#: scene/resources/style_box.cpp
+msgid "Content Margin"
+msgstr ""
+
+#: scene/resources/style_box.cpp
+msgid "Expand Margin"
+msgstr ""
+
+#: scene/resources/style_box.cpp
+msgid "Skew"
+msgstr ""
+
+#: scene/resources/style_box.cpp
+msgid "Corner Radius"
+msgstr ""
+
+#: scene/resources/style_box.cpp
+msgid "Corner Detail"
+msgstr ""
+
+#: scene/resources/style_box.cpp
+msgid "Anti Aliasing"
+msgstr ""
+
+#: scene/resources/style_box.cpp
+msgid "Grow Begin"
+msgstr ""
+
+#: scene/resources/style_box.cpp
+msgid "Grow End"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Load Path"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Base Texture"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Image Size"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Side"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Front"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Back"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Storage Mode"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Lossy Storage Quality"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "From"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "To"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Base"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Current Frame"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Pause"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Which Feed"
+msgstr ""
+
+#: scene/resources/texture.cpp
+msgid "Camera Is Active"
+msgstr ""
+
+#: scene/resources/theme.cpp
+msgid "Default Font"
+msgstr ""
+
+#: scene/resources/visual_shader.cpp
+msgid "Output Port For Preview"
+msgstr ""
+
+#: scene/resources/visual_shader.cpp
+msgid "Depth Draw"
+msgstr ""
+
+#: scene/resources/visual_shader.cpp
+msgid "Cull"
+msgstr ""
+
+#: scene/resources/visual_shader.cpp
+msgid "Diffuse"
+msgstr ""
+
+#: scene/resources/visual_shader.cpp
+msgid "Async"
+msgstr ""
+
+#: scene/resources/visual_shader.cpp
+msgid "Modes"
+msgstr ""
+
+#: scene/resources/visual_shader.cpp
+msgid "Input Name"
+msgstr ""
+
+#: scene/resources/visual_shader.cpp
+msgid "Uniform Name"
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid ""
+"The sampler port is connected but not used. Consider changing the source to "
+"'SamplerPort'."
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Invalid source for preview."
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Invalid source for shader."
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Texture Type"
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Cube Map"
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Default Value Enabled"
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Default Value"
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Color Default"
+msgstr ""
+
+#: scene/resources/visual_shader_nodes.cpp
+msgid "Invalid comparison function for that type."
+msgstr ""
+
+#: scene/resources/world.cpp
+msgid "Fallback Environment"
+msgstr ""
+
+#: scene/resources/world.cpp
+msgid "Scenario"
+msgstr ""
+
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Navigation Map"
+msgstr ""
+
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Direct Space State"
+msgstr ""
+
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Default Gravity Vector"
+msgstr ""
+
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Default Linear Damp"
+msgstr ""
+
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Default Angular Damp"
+msgstr ""
+
+#: scene/resources/world.cpp
+msgid "Default Map Up"
+msgstr ""
+
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Default Cell Size"
+msgstr ""
+
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Default Cell Height"
+msgstr ""
+
+#: scene/resources/world.cpp scene/resources/world_2d.cpp
+msgid "Default Edge Connection Margin"
+msgstr ""
+
+#: scene/resources/world_2d.cpp
+msgid "Canvas"
+msgstr ""
+
+#: servers/arvr/arvr_interface.cpp
+msgid "Is Primary"
+msgstr ""
+
+#: servers/arvr/arvr_interface.cpp
+msgid "Is Initialized"
+msgstr ""
+
+#: servers/arvr/arvr_interface.cpp
+msgid "AR"
+msgstr ""
+
+#: servers/arvr/arvr_interface.cpp
+msgid "Is Anchor Detection Enabled"
+msgstr ""
+
+#: servers/arvr_server.cpp
+msgid "Primary Interface"
+msgstr ""
+
+#: servers/audio/audio_stream.cpp
+msgid "Audio Stream"
+msgstr ""
+
+#: servers/audio/audio_stream.cpp
+msgid "Random Pitch"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_capture.cpp
+#: servers/audio/effects/audio_effect_spectrum_analyzer.cpp
+#: servers/audio/effects/audio_stream_generator.cpp
+msgid "Buffer Length"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+msgid "Voice Count"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+#: servers/audio/effects/audio_effect_delay.cpp
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "Dry"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "Wet"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+msgid "Voice"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+#: servers/audio/effects/audio_effect_delay.cpp
+msgid "Delay (ms)"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+#: servers/audio/effects/audio_effect_phaser.cpp
+msgid "Rate Hz"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+msgid "Depth (ms)"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+#: servers/audio/effects/audio_effect_delay.cpp
+msgid "Level dB"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_chorus.cpp
+#: servers/audio/effects/audio_effect_delay.cpp
+#: servers/audio/effects/audio_effect_panner.cpp
+msgid "Pan"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_compressor.cpp
+#: servers/audio/effects/audio_effect_filter.cpp
+msgid "Gain"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_compressor.cpp
+msgid "Attack (µs)"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_compressor.cpp
+msgid "Release (ms)"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_compressor.cpp
+msgid "Mix"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_compressor.cpp
+msgid "Sidechain"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_delay.cpp
+msgid "Tap 1"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_delay.cpp
+msgid "Tap 2"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_delay.cpp
+#: servers/audio/effects/audio_effect_phaser.cpp
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "Feedback"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_delay.cpp
+msgid "Low-pass"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_distortion.cpp
+msgid "Pre Gain"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_distortion.cpp
+msgid "Keep Hf Hz"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_distortion.cpp
+msgid "Drive"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_distortion.cpp
+msgid "Post Gain"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_filter.cpp
+msgid "Resonance"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_limiter.cpp
+msgid "Ceiling dB"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_limiter.cpp
+msgid "Threshold dB"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_limiter.cpp
+msgid "Soft Clip dB"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_limiter.cpp
+msgid "Soft Clip Ratio"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_phaser.cpp
+msgid "Range Min Hz"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_phaser.cpp
+msgid "Range Max Hz"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_pitch_shift.cpp
+msgid "Oversampling"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_pitch_shift.cpp
+#: servers/audio/effects/audio_effect_spectrum_analyzer.cpp
+msgid "FFT Size"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "Predelay"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "Msec"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "Room Size"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_reverb.cpp
+msgid "High-pass"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_spectrum_analyzer.cpp
+msgid "Tap Back Pos"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_stereo_enhance.cpp
+msgid "Pan Pullout"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_stereo_enhance.cpp
+msgid "Time Pullout (ms)"
+msgstr ""
+
+#: servers/audio/effects/audio_effect_stereo_enhance.cpp
+msgid "Surround"
+msgstr ""
+
+#: servers/audio_server.cpp
+msgid "Enable Audio Input"
+msgstr ""
+
+#: servers/audio_server.cpp
+msgid "Output Latency"
+msgstr ""
+
+#: servers/audio_server.cpp
+msgid "Channel Disable Threshold dB"
+msgstr ""
+
+#: servers/audio_server.cpp
+msgid "Channel Disable Time"
+msgstr ""
+
+#: servers/audio_server.cpp
+msgid "Video Delay Compensation (ms)"
+msgstr ""
+
+#: servers/audio_server.cpp
+msgid "Bus Count"
+msgstr ""
+
+#: servers/audio_server.cpp
+msgid "Capture Device"
+msgstr ""
+
+#: servers/audio_server.cpp
+msgid "Global Rate Scale"
+msgstr ""
+
+#: servers/camera/camera_feed.cpp
+msgid "Feed"
+msgstr ""
+
+#: servers/camera/camera_feed.cpp
+msgid "Is Active"
+msgstr ""
+
+#: servers/physics/space_sw.cpp servers/physics_2d/space_2d_sw.cpp
+msgid "Sleep Threshold Linear"
+msgstr ""
+
+#: servers/physics/space_sw.cpp servers/physics_2d/space_2d_sw.cpp
+msgid "Sleep Threshold Angular"
+msgstr ""
+
+#: servers/physics/space_sw.cpp servers/physics_2d/space_2d_sw.cpp
+msgid "Time Before Sleep"
+msgstr ""
+
+#: servers/physics_2d/physics_2d_server_sw.cpp
+msgid "BP Hash Table Size"
+msgstr ""
+
+#: servers/physics_2d/physics_2d_server_sw.cpp
+msgid "Large Object Surface Threshold In Cells"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Inverse Mass"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Inverse Inertia"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Total Angular Damp"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Total Linear Damp"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Total Gravity"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Linear Velocity"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Exclude"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Shape RID"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collide With Bodies"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collide With Areas"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Motion Remainder"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collision Point"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collision Normal"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collision Depth"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collision Safe Fraction"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Collision Unsafe Fraction"
+msgstr ""
+
+#: servers/physics_2d_server.cpp servers/physics_server.cpp
+msgid "Physics Engine"
+msgstr ""
+
+#: servers/physics_server.cpp
+msgid "Center Of Mass"
+msgstr ""
+
+#: servers/physics_server.cpp
+msgid "Principal Inertia Axes"
+msgstr ""
+
+#: servers/visual/shader_language.cpp
+msgid "Varying may not be assigned in the '%s' function."
+msgstr ""
+
+#: servers/visual/shader_language.cpp
+msgid ""
+"Varyings which were assigned in 'vertex' function may not be reassigned in "
+"'fragment' or 'light'."
+msgstr ""
+
+#: servers/visual/shader_language.cpp
+msgid ""
+"Varyings which were assigned in 'fragment' function may not be reassigned in "
+"'vertex' or 'light'."
+msgstr ""
+
+#: servers/visual/shader_language.cpp
+msgid "Assignment to function."
+msgstr ""
+
+#: servers/visual/shader_language.cpp
+msgid "Assignment to uniform."
+msgstr ""
+
+#: servers/visual/shader_language.cpp
+msgid "Constants cannot be modified."
+msgstr ""
+
+#: servers/visual/visual_server_scene.cpp
+msgid "Spatial Partitioning"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Render Loop Enabled"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "VRAM Compression"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Import BPTC"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Import S3TC"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Import ETC"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Import ETC2"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Import PVRTC"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Lossless Compression"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Force PNG"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "WebP Compression Level"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Time Rollover Secs"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Cubemap Size"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Quadrant 0 Subdiv"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Quadrant 1 Subdiv"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Quadrant 2 Subdiv"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Quadrant 3 Subdiv"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Shadows"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Filter Mode"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Texture Array Reflections"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "High Quality GGX"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Irradiance Max Size"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Shading"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Force Vertex Shading"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Force Lambert Over Burley"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Force Blinn Over GGX"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Mesh Storage"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Split Stream"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Use Physical Light Attenuation"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Depth Prepass"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Disable For Vendors"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Anisotropic Filter Level"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Use Nearest Mipmap Filter"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Skinning"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Software Skinning Fallback"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Force Software Skinning"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Use Software Skinning"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Ninepatch Mode"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "OpenGL"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Batching Send Null"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Batching Stream"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Legacy Orphan Buffers"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Legacy Stream"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Batching"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Use Batching"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Use Batching In Editor"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Single Rect Fallback"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Max Join Item Commands"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Colored Vertex Format Threshold"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Scissor Area Threshold"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Max Join Items"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Batch Buffer Size"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Item Reordering Lookahead"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Flash Batching"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Diagnose Frame"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "GLES2"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Compatibility"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Disable Half Float"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Enable High Float"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Precision"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "UV Contract"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "UV Contract Amount"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Use Simple PVS"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "PVS Logging"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Use Signals"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Remove Danglers"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Flip Imported Portals"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Occlusion Culling"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Max Active Spheres"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Max Active Polygons"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Shader Compilation Mode"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Max Simultaneous Compiles"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Log Active Async Compiles Count"
+msgstr ""
+
+#: servers/visual_server.cpp
+msgid "Shader Cache Size (MB)"
+msgstr ""
diff --git a/editor/translations/is.po b/editor/translations/is.po
index 512c660eef..8514155c68 100644
--- a/editor/translations/is.po
+++ b/editor/translations/is.po
@@ -4425,6 +4425,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7154,7 +7155,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14981,18 +14983,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Fjarlægja val"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Fjarlægja val"
 
 #: editor/scene_tree_dock.cpp
@@ -15185,6 +15187,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Fjarlægja val"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15248,6 +15255,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17070,6 +17081,19 @@ msgstr "Allt úrvalið"
 msgid "Auto Update Project"
 msgstr "Verkefna Stjóri"
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Verkefna Stjóri"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18799,6 +18823,11 @@ msgstr "Tvíteknir lyklar"
 msgid "Custom BG Color"
 msgstr "Tvíteknir lyklar"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Breyta..."
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19597,6 +19626,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/it.po b/editor/translations/it.po
index 2c9f7eb6fe..c520b1567d 100644
--- a/editor/translations/it.po
+++ b/editor/translations/it.po
@@ -71,12 +71,13 @@
 # conecat <ilgrandemax190@gmail.com>, 2022.
 # Gico2006 <gradaellig@protonmail.com>, 2022.
 # ale piccia <picciatialessio2@gmail.com>, 2022.
+# Simone Starace <simone.starace93@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-31 18:34+0000\n"
+"PO-Revision-Date: 2022-08-30 03:11+0000\n"
 "Last-Translator: Mirko <miknsop@gmail.com>\n"
 "Language-Team: Italian <https://hosted.weblate.org/projects/godot-engine/"
 "godot/it/>\n"
@@ -85,7 +86,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -456,7 +457,7 @@ msgstr "Comando"
 #: core/os/input_event.cpp
 #, fuzzy
 msgid "Physical"
-msgstr " (Fisico)"
+msgstr "Fisico"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
@@ -465,8 +466,9 @@ msgid "Pressed"
 msgstr "Premuto"
 
 #: core/os/input_event.cpp
+#, fuzzy
 msgid "Scancode"
-msgstr "Scansione Codice"
+msgstr "Scancode"
 
 #: core/os/input_event.cpp
 msgid "Physical Scancode"
@@ -901,7 +903,6 @@ msgid "Modules"
 msgstr "Moduli"
 
 #: core/register_core_types.cpp
-#, fuzzy
 msgid "TCP"
 msgstr "TCP"
 
@@ -1272,7 +1273,7 @@ msgstr "Cambia la durata dell'animazione"
 #: editor/animation_track_editor.cpp
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Change Animation Loop"
-msgstr "Commuta ciclicità animazione"
+msgstr "Cambia ciclo di animazione"
 
 #: editor/animation_track_editor.cpp
 msgid "Property Track"
@@ -1379,9 +1380,8 @@ msgid "Type:"
 msgstr "Tipo:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "(Invalid, expected type: %s)"
-msgstr "Template di esportazione non valido:"
+msgstr "(Non valido, tipo previsto: %s)"
 
 #: editor/animation_track_editor.cpp
 msgid "Easing:"
@@ -1398,9 +1398,8 @@ msgid "Out-Handle:"
 msgstr "Imposta Maniglia"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Stream:"
-msgstr "Stream"
+msgstr "Flusso:"
 
 #: editor/animation_track_editor.cpp
 msgid "Start (s):"
@@ -1540,6 +1539,7 @@ msgid "animation"
 msgstr "animazione"
 
 #: editor/animation_track_editor.cpp
+#, fuzzy
 msgid "AnimationPlayer can't animate itself, only other players."
 msgstr "AnimationPlayer non può animare se stesso, solo altri nodi."
 
@@ -1630,7 +1630,6 @@ msgid "Add Method Track Key"
 msgstr "Aggiungi una chiave a una traccia di chiamate metodi"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Method not found in object:"
 msgstr "Metodo non trovato nell'oggetto:"
 
@@ -2115,7 +2114,6 @@ msgid "Are you sure you want to remove all connections from the \"%s\" signal?"
 msgstr "Sei sicuro di voler rimuovere tutte le connessioni dal segnale \"%s\"?"
 
 #: editor/connections_dialog.cpp editor/editor_help.cpp editor/node_dock.cpp
-#, fuzzy
 msgid "Signals"
 msgstr "Segnali"
 
@@ -2813,9 +2811,8 @@ msgid "Project export for platform:"
 msgstr "Esportazione del progetto per la piattaforma:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "Completato con errori."
+msgstr "Completato con avvertimenti."
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -4565,6 +4562,7 @@ msgstr "Strumenti di progetto o scena vari."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Progetto"
 
@@ -6998,7 +6996,6 @@ msgstr "Anisotropico"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp
-#, fuzzy
 msgid "sRGB"
 msgstr "sRGB"
 
@@ -7355,7 +7352,8 @@ msgid "8 Bit"
 msgstr "8 Bit"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Mono"
 
@@ -10571,7 +10569,6 @@ msgstr "Script precedente"
 
 #: editor/plugins/script_editor_plugin.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "File"
 msgstr "File"
 
@@ -15409,16 +15406,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Rendi Locale"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr "Un altro nodo sta già usando questo nome unico nella scena."
-
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
 msgstr "Abilita Nome Unico Scena"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Unique names already used by another node in the scene:"
+msgstr "Un altro nodo sta già usando questo nome unico nella scena."
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Disabilita Nome Unico Scena"
 
 #: editor/scene_tree_dock.cpp
@@ -15618,6 +15618,10 @@ msgid "Button Group"
 msgstr "Gruppo Pulsanti"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "Disabilita Nome Unico Scena"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Collegamento da)"
 
@@ -15696,6 +15700,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Nome nodo invalido, i caratteri seguenti non sono consentiti:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "Un altro nodo sta già usando questo nome unico nella scena."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Rinomina Nodo"
 
@@ -17499,6 +17507,21 @@ msgstr "Crea Soluzione"
 msgid "Auto Update Project"
 msgstr "Auto-Aggiorna Progetto"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Nome Display"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Scegli una cartella"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Scegli una cartella"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 #, fuzzy
 msgid "End of inner exception stack trace"
@@ -19331,6 +19354,11 @@ msgstr "Taglia nodi"
 msgid "Custom BG Color"
 msgstr "Taglia nodi"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Espandi Tutto"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20186,6 +20214,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Nome breve del pacchetto non valido."
 
@@ -22217,7 +22251,7 @@ msgstr "Gizmos"
 
 #: scene/3d/baked_lightmap.cpp
 msgid "Tweaks"
-msgstr ""
+msgstr "Ritocchi"
 
 #: scene/3d/baked_lightmap.cpp
 msgid "Bounces"
@@ -25200,7 +25234,7 @@ msgstr "Imposta più valori:"
 #: scene/main/scene_tree.cpp scene/resources/mesh_library.cpp
 #: scene/resources/shape_2d.cpp
 msgid "Shapes"
-msgstr ""
+msgstr "Forme"
 
 #: scene/main/scene_tree.cpp
 msgid "Shape Color"
diff --git a/editor/translations/ja.po b/editor/translations/ja.po
index 60458e89df..f086111ef2 100644
--- a/editor/translations/ja.po
+++ b/editor/translations/ja.po
@@ -40,13 +40,15 @@
 # jp.owo.Manda <admin@alterbaum.net>, 2022.
 # KokiOgawa <mupimupicandy@gmail.com>, 2022.
 # cacapon <takuma.tsubo@amazingengine.co.jp>, 2022.
+# fadhliazhari <m.fadhliazhari@gmail.com>, 2022.
+# Chia-Hsiang Cheng <cche0109@student.monash.edu>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-06-06 01:50+0000\n"
-"Last-Translator: nitenook <admin@alterbaum.net>\n"
+"PO-Revision-Date: 2022-08-21 06:01+0000\n"
+"Last-Translator: KokiOgawa <mupimupicandy@gmail.com>\n"
 "Language-Team: Japanese <https://hosted.weblate.org/projects/godot-engine/"
 "godot/ja/>\n"
 "Language: ja\n"
@@ -54,7 +56,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -171,9 +173,8 @@ msgid "Print Error Messages"
 msgstr "エラーメッセージを表示"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Iterations Per Second"
-msgstr "補間モード"
+msgstr "毎秒反復回数"
 
 #: core/bind/core_bind.cpp
 msgid "Target FPS"
@@ -186,21 +187,19 @@ msgstr "タイムスケール"
 #: core/bind/core_bind.cpp main/main.cpp
 #, fuzzy
 msgid "Physics Jitter Fix"
-msgstr "物理フレーム %"
+msgstr "物理ジッタ修正"
 
 #: core/bind/core_bind.cpp editor/plugins/version_control_editor_plugin.cpp
 msgid "Error"
 msgstr "エラー"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Error String"
-msgstr "保存中にエラーが発生しました"
+msgstr "エラー文字列"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Error Line"
-msgstr "保存中にエラーが発生しました"
+msgstr "エラー行"
 
 #: core/bind/core_bind.cpp
 msgid "Result"
@@ -350,9 +349,8 @@ msgid "Not enough bytes for decoding bytes, or invalid format."
 msgstr "デコードするにはバイトが足りないか、または無効な形式です。"
 
 #: core/math/expression.cpp
-#, fuzzy
 msgid "Invalid input %d (not passed) in expression"
-msgstr "式中の無効な入力 %i (渡されていません)"
+msgstr "式に無効入力 %d (渡されていません)"
 
 #: core/math/expression.cpp
 msgid "self can't be used because instance is null (not passed)"
@@ -396,14 +394,12 @@ msgid "Max Size (KB)"
 msgstr "最大サイズ (KB)"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Mouse Mode"
-msgstr "移動モード"
+msgstr "マウスモード"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Use Accumulated Input"
-msgstr "入力を削除"
+msgstr "蓄積入力使用"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: servers/audio_server.cpp
@@ -431,16 +427,14 @@ msgid "Command"
 msgstr "Command"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr " (物理的)"
+msgstr "物理"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Pressed"
-msgstr "プリセット"
+msgstr "押下"
 
 #: core/os/input_event.cpp
 msgid "Scancode"
@@ -489,7 +483,7 @@ msgstr "圧力"
 #: core/os/input_event.cpp
 #, fuzzy
 msgid "Pen Inverted"
-msgstr "反転"
+msgstr "ペン反転"
 
 #: core/os/input_event.cpp
 msgid "Relative"
@@ -549,9 +543,8 @@ msgid "Velocity"
 msgstr "ベロシティ"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Instrument"
-msgstr "インストゥルメント"
+msgstr "楽器"
 
 #: core/os/input_event.cpp
 msgid "Controller Number"
@@ -623,16 +616,14 @@ msgid "Use Custom User Dir"
 msgstr "カスタムユーザディレクトリを使用"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Custom User Dir Name"
-msgstr "カスタムユーザディレクトリ名"
+msgstr "カスタムユーザフォルダ名"
 
 #: core/project_settings.cpp main/main.cpp
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
 #: platform/uwp/os_uwp.cpp
-#, fuzzy
 msgid "Display"
-msgstr "すべて表示"
+msgstr "表示"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/opensimplex/noise_texture.cpp scene/2d/line_2d.cpp
@@ -654,14 +645,12 @@ msgid "Always On Top"
 msgstr "常に最前面"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Test Width"
-msgstr "左伸長"
+msgstr "幅テスト"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Test Height"
-msgstr "試験的"
+msgstr "高さテスト"
 
 #: core/project_settings.cpp editor/animation_track_editor.cpp
 #: editor/editor_audio_buses.cpp main/main.cpp servers/audio_server.cpp
@@ -680,9 +669,8 @@ msgid "Editor"
 msgstr "エディター"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Main Run Args"
-msgstr "メインシーンの引数:"
+msgstr "メイン実行引数"
 
 #: core/project_settings.cpp
 msgid "Scene Naming"
@@ -697,14 +685,12 @@ msgid "Script Templates Search Path"
 msgstr "スクリプトテンプレートの検索パス"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Autoload On Startup"
-msgstr "起動時の自動読み込み"
+msgstr "起動時のVCS自動読み込み"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Plugin Name"
-msgstr "バージョンコントロール"
+msgstr "VCSプラグイン名"
 
 #: core/project_settings.cpp scene/2d/collision_object_2d.cpp
 #: scene/3d/collision_object.cpp scene/gui/control.cpp
@@ -713,66 +699,55 @@ msgstr "入力"
 
 #: core/project_settings.cpp
 msgid "UI Accept"
-msgstr ""
+msgstr "UI 同意"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Select"
-msgstr "選択"
+msgstr "UI 選択"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Cancel"
-msgstr "キャンセル"
+msgstr "UI キャンセル"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Focus Next"
-msgstr "パスにフォーカス"
+msgstr "UI 次へフォーカス"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Focus Prev"
-msgstr "パスにフォーカス"
+msgstr "UI 前へフォーカス"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Left"
-msgstr "左"
+msgstr "UI 左"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Right"
-msgstr "右"
+msgstr "UI 右"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Up"
-msgstr "上"
+msgstr "UI 上"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Down"
-msgstr "下"
+msgstr "UI 下"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Page Up"
-msgstr "ページアップ"
+msgstr "UI ページアップ"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Page Down"
-msgstr "ページダウン"
+msgstr "UI ページダウン"
 
 #: core/project_settings.cpp
 msgid "UI Home"
 msgstr "ホーム"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI End"
-msgstr "エンド"
+msgstr "UI エンド"
 
 #: core/project_settings.cpp main/main.cpp modules/bullet/register_types.cpp
 #: modules/bullet/space_bullet.cpp scene/2d/physics_body_2d.cpp
@@ -782,9 +757,8 @@ msgstr "エンド"
 #: servers/physics_2d/physics_2d_server_wrap_mt.h
 #: servers/physics_2d/space_2d_sw.cpp servers/physics_2d_server.cpp
 #: servers/physics_server.cpp
-#, fuzzy
 msgid "Physics"
-msgstr "(物理的)"
+msgstr "物理"
 
 #: core/project_settings.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -799,7 +773,7 @@ msgstr "3D"
 #: core/project_settings.cpp
 #, fuzzy
 msgid "Smooth Trimesh Collision"
-msgstr "三角形メッシュ コリジョンの兄弟を作成"
+msgstr "スムーズ三角形メッシュコリジョン"
 
 #: core/project_settings.cpp drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles2/rasterizer_scene_gles2.cpp
@@ -828,7 +802,7 @@ msgstr "品質"
 #: servers/visual_server.cpp
 #, fuzzy
 msgid "Filters"
-msgstr "フィルター:"
+msgstr "フィルター"
 
 #: core/project_settings.cpp scene/main/viewport.cpp
 msgid "Sharpen Intensity"
@@ -859,7 +833,7 @@ msgstr "プロファイラー"
 #: core/project_settings.cpp
 #, fuzzy
 msgid "Max Functions"
-msgstr "関数を作成"
+msgstr "最大関数"
 
 #: core/project_settings.cpp scene/3d/vehicle_body.cpp
 msgid "Compression"
@@ -910,8 +884,9 @@ msgid "Connect Timeout Seconds"
 msgstr "接続タイムアウトの秒数"
 
 #: core/register_core_types.cpp
+#, fuzzy
 msgid "Packet Peer Stream"
-msgstr ""
+msgstr "パケットピアストリーム"
 
 #: core/register_core_types.cpp
 msgid "Max Buffer (Power of 2)"
@@ -1078,7 +1053,7 @@ msgstr "スケール"
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 #, fuzzy
 msgid "Follow Surface"
-msgstr "サーフェスを投入する"
+msgstr "サーフェスをフォローする"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Weight Samples"
@@ -1170,7 +1145,7 @@ msgstr "アニメーション呼び出しの変更"
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
 msgid "Frame"
-msgstr "フレーム %"
+msgstr "フレーム"
 
 #: editor/animation_track_editor.cpp editor/editor_profiler.cpp
 #: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
@@ -1181,16 +1156,14 @@ msgstr "時間"
 
 #: editor/animation_track_editor.cpp editor/import/resource_importer_scene.cpp
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Location"
-msgstr "ローカライズ"
+msgstr "位置"
 
 #: editor/animation_track_editor.cpp modules/gltf/gltf_node.cpp
 #: scene/2d/polygon_2d.cpp scene/2d/remote_transform_2d.cpp
 #: scene/3d/remote_transform.cpp scene/3d/spatial.cpp scene/gui/control.cpp
-#, fuzzy
 msgid "Rotation"
-msgstr "回転のステップ:"
+msgstr "回転"
 
 #: editor/animation_track_editor.cpp editor/script_editor_debugger.cpp
 #: modules/visual_script/visual_script_nodes.cpp scene/gui/range.cpp
@@ -1200,7 +1173,7 @@ msgstr "値"
 #: editor/animation_track_editor.cpp
 #, fuzzy
 msgid "Arg Count"
-msgstr "総計:"
+msgstr "引数数"
 
 #: editor/animation_track_editor.cpp main/main.cpp
 #: modules/mono/mono_gd/gd_mono.cpp
@@ -1217,12 +1190,12 @@ msgstr "タイプ(型)"
 #: editor/animation_track_editor.cpp
 #, fuzzy
 msgid "In Handle"
-msgstr "ハンドルを設定する"
+msgstr "インハンドル"
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
 msgid "Out Handle"
-msgstr "ハンドルを設定する"
+msgstr "アウトハンドル"
 
 #: editor/animation_track_editor.cpp
 #: editor/import/resource_importer_texture.cpp
@@ -1234,12 +1207,12 @@ msgstr "ストリーム"
 #: editor/animation_track_editor.cpp
 #, fuzzy
 msgid "Start Offset"
-msgstr "グリッドのオフセット:"
+msgstr "始点オフセット"
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
 msgid "End Offset"
-msgstr "オフセット:"
+msgstr "終点オフセット"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_scene.cpp
@@ -2257,8 +2230,9 @@ msgid "Open"
 msgstr "開く"
 
 #: editor/dependency_editor.cpp
+#, fuzzy
 msgid "Owners of: %s (Total: %d)"
-msgstr ""
+msgstr "所有者: %s (合計: %d)"
 
 #: editor/dependency_editor.cpp
 msgid ""
@@ -2817,8 +2791,9 @@ msgid "Choose"
 msgstr "選ぶ"
 
 #: editor/editor_export.cpp
+#, fuzzy
 msgid "Project export for platform:"
-msgstr ""
+msgstr "プラットフォーム用のプロジェクトエクスポート:"
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -2951,8 +2926,9 @@ msgid "64 Bits"
 msgstr "64ビット"
 
 #: editor/editor_export.cpp
+#, fuzzy
 msgid "Embed PCK"
-msgstr ""
+msgstr "組み込みPCK"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
 #, fuzzy
@@ -2960,12 +2936,14 @@ msgid "Texture Format"
 msgstr "テクスチャ領域"
 
 #: editor/editor_export.cpp
+#, fuzzy
 msgid "BPTC"
-msgstr ""
+msgstr "BPTC"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
+#, fuzzy
 msgid "S3TC"
-msgstr ""
+msgstr "S3TC"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
 #, fuzzy
@@ -2973,8 +2951,9 @@ msgid "ETC"
 msgstr "TCP"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
+#, fuzzy
 msgid "ETC2"
-msgstr ""
+msgstr "ETC2"
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -4427,24 +4406,28 @@ msgid "Default Property Name Style"
 msgstr "デフォルトのプロジェクトパス"
 
 #: editor/editor_node.cpp
+#, fuzzy
 msgid "Default Float Step"
-msgstr ""
+msgstr "デフォルトフロートステップ"
 
 #: editor/editor_node.cpp scene/gui/tree.cpp
 msgid "Disable Folding"
 msgstr "折りたたみを無効化"
 
 #: editor/editor_node.cpp
+#, fuzzy
 msgid "Auto Unfold Foreign Scenes"
-msgstr ""
+msgstr "自動展開外来シーン"
 
 #: editor/editor_node.cpp
+#, fuzzy
 msgid "Horizontal Vector2 Editing"
-msgstr ""
+msgstr "水平ベクトル2編集"
 
 #: editor/editor_node.cpp
+#, fuzzy
 msgid "Horizontal Vector Types Editing"
-msgstr ""
+msgstr "水平ベクトルタイプ編集"
 
 #: editor/editor_node.cpp
 msgid "Open Resources In Current Inspector"
@@ -4567,6 +4550,7 @@ msgstr "その他のプロジェクトまたはシーン全体のツール。"
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "プロジェクト"
 
@@ -5112,13 +5096,14 @@ msgid "Debugger"
 msgstr "デバッガー"
 
 #: editor/editor_profiler.cpp
+#, fuzzy
 msgid "Profiler Frame History Size"
-msgstr ""
+msgstr "プロファイラフレーム履歴サイズ"
 
 #: editor/editor_profiler.cpp
 #, fuzzy
 msgid "Profiler Frame Max Functions"
-msgstr "関数名を変更"
+msgstr "プロファイラフレーム最大関数数"
 
 #: editor/editor_properties.cpp
 msgid "Edit Text:"
@@ -5187,9 +5172,8 @@ msgid "Size:"
 msgstr "サイズ:"
 
 #: editor/editor_properties_array_dict.cpp
-#, fuzzy
 msgid "Page:"
-msgstr "ページ: "
+msgstr "ページ:"
 
 #: editor/editor_properties_array_dict.cpp
 #: editor/plugins/theme_editor_plugin.cpp
@@ -5361,12 +5345,14 @@ msgid "Dim Editor On Dialog Popup"
 msgstr "ダイアログのポップアップ時にエディターを薄暗くする"
 
 #: editor/editor_settings.cpp main/main.cpp
+#, fuzzy
 msgid "Low Processor Mode Sleep (µsec)"
-msgstr ""
+msgstr "低プロセッサ モード スリープ (マイクロ秒)"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Unfocused Low Processor Mode Sleep (µsec)"
-msgstr ""
+msgstr "フォーカスされていない低プロセッサ モード スリープ (マイクロ秒)"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5374,12 +5360,14 @@ msgid "Separate Distraction Mode"
 msgstr "集中モード"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Automatically Open Screenshots"
-msgstr ""
+msgstr "自動的にスクリーンショットを開く"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Max Array Dictionary Items Per Page"
-msgstr ""
+msgstr "ページあたりの最大配列辞書項目数"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
 #: editor/plugins/theme_editor_plugin.cpp scene/gui/control.cpp
@@ -5408,8 +5396,9 @@ msgid "Contrast"
 msgstr "コントラスト"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Relationship Line Opacity"
-msgstr ""
+msgstr "関係線の不透明度"
 
 #: editor/editor_settings.cpp
 msgid "Highlight Tabs"
@@ -5420,8 +5409,9 @@ msgid "Border Size"
 msgstr "ボーダーサイズ"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Use Graph Node Headers"
-msgstr ""
+msgstr "グラフ ノード ヘッダーを使用する"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5460,8 +5450,9 @@ msgid "Compress Binary Resources"
 msgstr "リソースをコピー"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Safe Save On Backup Then Rename"
-msgstr ""
+msgstr "バックアップ時に安全に保存してから名前を変更する"
 
 #: editor/editor_settings.cpp
 msgid "File Dialog"
@@ -5472,16 +5463,18 @@ msgid "Thumbnail Size"
 msgstr "サムネイルのサイズ"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Docks"
-msgstr ""
+msgstr "Docks"
 
 #: editor/editor_settings.cpp
 msgid "Scene Tree"
 msgstr "シーンツリー"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Start Create Dialog Fully Expanded"
-msgstr ""
+msgstr "完全に展開された作成ダイアログを開始する"
 
 #: editor/editor_settings.cpp
 msgid "Always Show Folders"
@@ -5574,8 +5567,9 @@ msgid "Minimap Width"
 msgstr "ミニマップの幅"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Mouse Extra Buttons Navigate History"
-msgstr ""
+msgstr "マウス追加ボタンナビゲート履歴"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5583,8 +5577,9 @@ msgid "Drag And Drop Selection"
 msgstr "GridMap の選択"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Stay In Script Editor On Node Selected"
-msgstr ""
+msgstr "ノード選択時にスクリプトエディタにとどまる"
 
 #: editor/editor_settings.cpp
 msgid "Appearance"
@@ -5599,8 +5594,9 @@ msgid "Line Numbers Zero Padded"
 msgstr "行番号をゼロ埋め"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Show Bookmark Gutter"
-msgstr ""
+msgstr "ブックマークガターを表示"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5608,36 +5604,41 @@ msgid "Show Breakpoint Gutter"
 msgstr "ブレークポイントをスキップする"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Show Info Gutter"
-msgstr ""
+msgstr "情報ガターを表示"
 
 #: editor/editor_settings.cpp
 msgid "Code Folding"
 msgstr "コードの折りたたみ"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Word Wrap"
-msgstr ""
+msgstr "ワードラップ"
 
 #: editor/editor_settings.cpp
 msgid "Show Line Length Guidelines"
 msgstr "行の長さのガイド線を表示"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Line Length Guideline Soft Column"
-msgstr ""
+msgstr "行長ガイドラインソフト列"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Line Length Guideline Hard Column"
-msgstr ""
+msgstr "行長ガイドライン ハード列"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
 msgid "Script List"
 msgstr "スクリプト一覧"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Show Members Overview"
-msgstr ""
+msgstr "メンバー概要を表示"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
 #, fuzzy
@@ -5669,16 +5670,18 @@ msgid "Create Signal Callbacks"
 msgstr "シグナルのコールバックを作成"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Sort Members Outline Alphabetically"
-msgstr ""
+msgstr "メンバーのアウトラインをアルファベット順に並べ替える"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Cursor"
 msgstr "カーソル"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Scroll Past End Of File"
-msgstr ""
+msgstr "ファイルの終わりを過ぎてスクロールする"
 
 #: editor/editor_settings.cpp
 msgid "Block Caret"
@@ -5703,24 +5706,29 @@ msgid "Completion"
 msgstr "完了"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Idle Parse Delay"
-msgstr ""
+msgstr "アイドル解析遅延"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Auto Brace Complete"
-msgstr ""
+msgstr "自動ブレース補完"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Code Complete Delay"
-msgstr ""
+msgstr "コード補完遅延"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Put Callhint Tooltip Below Current Line"
-msgstr ""
+msgstr "コールヒントツールチップを現在の行の下に配置"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Callhint Tooltip Offset"
-msgstr ""
+msgstr "コールヒントツールチップオフセット"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5805,7 +5813,7 @@ msgstr "点"
 #: scene/resources/particles_material.cpp servers/physics_2d_server.cpp
 #: servers/physics_server.cpp
 msgid "Shape"
-msgstr ""
+msgstr "シェイプ"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5818,16 +5826,19 @@ msgid "Grid Size"
 msgstr "グリッドのステップ:"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Grid Division Level Max"
-msgstr ""
+msgstr "グリッド分割レベル最大"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Grid Division Level Min"
-msgstr ""
+msgstr "グリッド分割レベル最小"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Grid Division Level Bias"
-msgstr ""
+msgstr "グリッド分割レベルバイアス"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5901,8 +5912,9 @@ msgid "Zoom Modifier"
 msgstr "変更済み"
 
 #: editor/editor_settings.cpp editor/plugins/spatial_editor_plugin.cpp
+#, fuzzy
 msgid "Warped Mouse Panning"
-msgstr ""
+msgstr "ワープマウスパンニング"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5910,12 +5922,14 @@ msgid "Navigation Feel"
 msgstr "ナビゲーションモード"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Orbit Sensitivity"
-msgstr ""
+msgstr "軌道感度"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Orbit Inertia"
-msgstr ""
+msgstr "軌道慣性"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -6003,16 +6017,19 @@ msgid "Viewport Border Color"
 msgstr "ビューポートのボーダーの色"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Constrain Editor View"
-msgstr ""
+msgstr "エディター ビューを制限"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Simple Panning"
-msgstr ""
+msgstr "簡易パンニング"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Scroll To Pan"
-msgstr ""
+msgstr "スクロールしてパンニング"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -6025,8 +6042,9 @@ msgid "Poly Editor"
 msgstr "Polygon 2D UV エディター"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Point Grab Radius"
-msgstr ""
+msgstr "ポイントグラブ半径"
 
 #: editor/editor_settings.cpp editor/plugins/polygon_2d_editor_plugin.cpp
 #, fuzzy
@@ -6039,8 +6057,9 @@ msgid "Autorename Animation Tracks"
 msgstr "アニメーションの名前を変更"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Default Create Bezier Tracks"
-msgstr ""
+msgstr "デフォルトベジェトラックを作成"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -6048,12 +6067,14 @@ msgid "Default Create Reset Tracks"
 msgstr "RESETトラックを作成"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Onion Layers Past Color"
-msgstr ""
+msgstr "オニオンレイヤー過去の色"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Onion Layers Future Color"
-msgstr ""
+msgstr "オニオンレイヤー将来の色"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -6065,8 +6086,9 @@ msgid "Minimap Opacity"
 msgstr "ミニマップの不透明度"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Window Placement"
-msgstr ""
+msgstr "ウィンドウの配置"
 
 #: editor/editor_settings.cpp scene/2d/back_buffer_copy.cpp scene/2d/sprite.cpp
 #: scene/2d/visibility_notifier_2d.cpp scene/3d/sprite_3d.cpp
@@ -6082,7 +6104,7 @@ msgstr "曲線のOut-Controlの位置を指定"
 
 #: editor/editor_settings.cpp platform/android/export/export_plugin.cpp
 msgid "Screen"
-msgstr ""
+msgstr "画面"
 
 #: editor/editor_settings.cpp
 msgid "Auto Save"
@@ -6183,16 +6205,19 @@ msgid "Completion Selected Color"
 msgstr "選択されたものをインポート"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+#, fuzzy
 msgid "Completion Existing Color"
-msgstr ""
+msgstr "既存の色の補完"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+#, fuzzy
 msgid "Completion Scroll Color"
-msgstr ""
+msgstr "スクロール色の補完"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
+#, fuzzy
 msgid "Completion Font Color"
-msgstr ""
+msgstr "フォント色の補完"
 
 #: editor/editor_settings.cpp
 msgid "Text Color"
@@ -6958,8 +6983,9 @@ msgid "Collada"
 msgstr "Collada"
 
 #: editor/import/editor_import_collada.cpp
+#, fuzzy
 msgid "Use Ambient"
-msgstr ""
+msgstr "アンビエントを使用"
 
 #: editor/import/resource_importer_bitmask.cpp
 #, fuzzy
@@ -6968,8 +6994,9 @@ msgstr "フォルダーを作成"
 
 #: editor/import/resource_importer_bitmask.cpp
 #: servers/audio/effects/audio_effect_compressor.cpp
+#, fuzzy
 msgid "Threshold"
-msgstr ""
+msgstr "閾"
 
 #: editor/import/resource_importer_csv_translation.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -6981,8 +7008,9 @@ msgid "Compress"
 msgstr "コンポーネント"
 
 #: editor/import/resource_importer_csv_translation.cpp
+#, fuzzy
 msgid "Delimiter"
-msgstr ""
+msgstr "区切り文字"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #, fuzzy
@@ -6990,8 +7018,9 @@ msgid "ColorCorrect"
 msgstr "Color関数。"
 
 #: editor/import/resource_importer_layered_texture.cpp
+#, fuzzy
 msgid "No BPTC If RGB"
-msgstr ""
+msgstr "RGB使用中の場合はBPTCを使用しない"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp scene/2d/cpu_particles_2d.cpp
@@ -7004,8 +7033,9 @@ msgstr "フラグ"
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp scene/animation/tween.cpp
 #: scene/resources/texture.cpp
+#, fuzzy
 msgid "Repeat"
-msgstr ""
+msgstr "繰り返し"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp scene/2d/light_2d.cpp
@@ -7022,13 +7052,14 @@ msgstr "シグナル"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid "Anisotropic"
-msgstr ""
+msgstr "異方性"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp
 msgid "sRGB"
-msgstr ""
+msgstr "sRGB"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #, fuzzy
@@ -7149,8 +7180,9 @@ msgid "Storage"
 msgstr "ファイルの保存:"
 
 #: editor/import/resource_importer_scene.cpp
+#, fuzzy
 msgid "Use Legacy Names"
-msgstr ""
+msgstr "従来の名前を使用"
 
 #: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
 #, fuzzy
@@ -7183,8 +7215,9 @@ msgid "Lightmap Texel Size"
 msgstr "ライトマップを焼き込む"
 
 #: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
+#, fuzzy
 msgid "Skins"
-msgstr ""
+msgstr "スキン"
 
 #: editor/import/resource_importer_scene.cpp
 #, fuzzy
@@ -7197,8 +7230,9 @@ msgid "External Files"
 msgstr "外部"
 
 #: editor/import/resource_importer_scene.cpp
+#, fuzzy
 msgid "Store In Subdir"
-msgstr ""
+msgstr "サブディレクトリに保存"
 
 #: editor/import/resource_importer_scene.cpp
 #, fuzzy
@@ -7306,20 +7340,28 @@ msgid "Saving..."
 msgstr "保存中..."
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid ""
 "%s: Texture detected as used as a normal map in 3D. Enabling red-green "
 "texture compression to reduce memory usage (blue channel is discarded)."
 msgstr ""
+"%s: 3Dで法線マップとして使用されているテクスチャが検出されました。赤緑テクス"
+"チャ圧縮を有効にしてメモリ使用量を削減します（青チャンネルはすでに破棄されま"
+"した）。"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid ""
 "%s: Texture detected as used in 3D. Enabling filter, repeat, mipmap "
 "generation and VRAM texture compression."
 msgstr ""
+"%s: 3Dで使用されているテクスチャが検出されました。フィルター、繰り返し、ミッ"
+"プマップ生成、VRAMテクスチャ圧縮を有効にします。"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid "2D, Detect 3D"
-msgstr ""
+msgstr "2D、3D検出"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
@@ -7327,8 +7369,9 @@ msgid "2D Pixel"
 msgstr "凝集ピクセル"
 
 #: editor/import/resource_importer_texture.cpp scene/resources/texture.cpp
+#, fuzzy
 msgid "Lossy Quality"
-msgstr ""
+msgstr "損失のある品質"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
@@ -7337,14 +7380,15 @@ msgstr "選択モード"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "BPTC LDR"
-msgstr ""
+msgstr "BPTC LDR"
 
 #: editor/import/resource_importer_texture.cpp
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/mesh_instance_2d.cpp scene/2d/multimesh_instance_2d.cpp
 #: scene/2d/particles_2d.cpp scene/2d/sprite.cpp scene/resources/style_box.cpp
+#, fuzzy
 msgid "Normal Map"
-msgstr ""
+msgstr "法線マップ"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
@@ -7352,8 +7396,9 @@ msgid "Process"
 msgstr "前処理"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid "Fix Alpha Border"
-msgstr ""
+msgstr "アルファボーダーを修正"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
@@ -7361,8 +7406,9 @@ msgid "Premult Alpha"
 msgstr "ポリゴンを編集"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid "Hdr As Srgb"
-msgstr ""
+msgstr "SrgbとしてHdr"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
@@ -7379,8 +7425,9 @@ msgid "Size Limit"
 msgstr "サイズ制限"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid "Detect 3D"
-msgstr ""
+msgstr "3Dを検出"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
@@ -7388,10 +7435,13 @@ msgid "SVG"
 msgstr "CSG"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid ""
 "Warning, no suitable PC VRAM compression enabled in Project Settings. This "
 "texture will not display correctly on PC."
 msgstr ""
+"警告、プロジェクト設定で有効な適切なPC VRAM圧縮がありません。このテクスチャ"
+"は PCで正しく表示されません。"
 
 #: editor/import/resource_importer_texture_atlas.cpp
 #, fuzzy
@@ -7409,8 +7459,9 @@ msgid "Crop To Region"
 msgstr "タイル領域を設定"
 
 #: editor/import/resource_importer_texture_atlas.cpp
+#, fuzzy
 msgid "Trim Alpha Border From Region"
-msgstr ""
+msgstr "アルファ境界線を領域からトリミング"
 
 #: editor/import/resource_importer_wav.cpp scene/2d/physics_body_2d.cpp
 #, fuzzy
@@ -7418,11 +7469,13 @@ msgid "Force"
 msgstr "強制プッシュ"
 
 #: editor/import/resource_importer_wav.cpp
+#, fuzzy
 msgid "8 Bit"
-msgstr ""
+msgstr "8ビット"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Mono"
 
@@ -7437,8 +7490,9 @@ msgid "Max Rate Hz"
 msgstr "ミックス ノード"
 
 #: editor/import/resource_importer_wav.cpp
+#, fuzzy
 msgid "Trim"
-msgstr ""
+msgstr "トリム"
 
 #: editor/import/resource_importer_wav.cpp
 #, fuzzy
@@ -7558,8 +7612,9 @@ msgid "Localized"
 msgstr "ロケール"
 
 #: editor/inspector_dock.cpp
+#, fuzzy
 msgid "Localization not available for current language."
-msgstr ""
+msgstr "現地語化は現在の言語では使用できません。"
 
 #: editor/inspector_dock.cpp
 msgid "Copy Properties"
@@ -8663,8 +8718,9 @@ msgid "Testing"
 msgstr "試験的"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
+#, fuzzy
 msgid "Failed to get repository configuration."
-msgstr ""
+msgstr "リポジトリを構成できませんでした。"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
 msgid "Assets ZIP File"
@@ -9591,12 +9647,14 @@ msgid "Gradient Edited"
 msgstr "グラデーション編集"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
+#, fuzzy
 msgid "Swap GradientTexture2D Fill Points"
-msgstr ""
+msgstr "GradientTexture2D 塗りつぶしポイントを入れ替え"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
+#, fuzzy
 msgid "Swap Gradient Fill Points"
-msgstr ""
+msgstr "Gradient の塗りつぶしポイントを入れ替え"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
 #, fuzzy
@@ -9620,7 +9678,7 @@ msgstr "アイコン"
 
 #: editor/plugins/item_list_editor_plugin.cpp
 msgid "ID"
-msgstr ""
+msgstr "ID"
 
 #: editor/plugins/item_list_editor_plugin.cpp
 #: scene/resources/default_theme/default_theme.cpp
@@ -10416,8 +10474,9 @@ msgid "Sync Bones to Polygon"
 msgstr "ボーンをポリゴンに同期させる"
 
 #: editor/plugins/ray_cast_2d_editor_plugin.cpp
+#, fuzzy
 msgid "Set cast_to"
-msgstr ""
+msgstr "cast_to を設定"
 
 #: editor/plugins/resource_preloader_editor_plugin.cpp
 msgid "ERROR: Couldn't load resource!"
@@ -10748,8 +10807,9 @@ msgid "Search Results"
 msgstr "検索結果"
 
 #: editor/plugins/script_editor_plugin.cpp
+#, fuzzy
 msgid "Open Dominant Script On Scene Change"
-msgstr ""
+msgstr "シーン変更時にドミナントスクリプトを開く"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "External"
@@ -10773,8 +10833,9 @@ msgid "Highlight Current Script"
 msgstr "現在のスクリプトをハイライトする"
 
 #: editor/plugins/script_editor_plugin.cpp
+#, fuzzy
 msgid "Script Temperature History Size"
-msgstr ""
+msgstr "スクリプト温度履歴サイズ"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Current Script Background Color"
@@ -10794,8 +10855,9 @@ msgid "List Script Names As"
 msgstr "スクリプト名:"
 
 #: editor/plugins/script_editor_plugin.cpp
+#, fuzzy
 msgid "Exec Flags"
-msgstr ""
+msgstr "実行フラグ"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Clear Recent Scripts"
@@ -11613,12 +11675,14 @@ msgid "Post"
 msgstr "後"
 
 #: editor/plugins/spatial_editor_plugin.cpp
+#, fuzzy
 msgid "Manipulator Gizmo Size"
-msgstr ""
+msgstr "マニピュレータギズモサイズ"
 
 #: editor/plugins/spatial_editor_plugin.cpp
+#, fuzzy
 msgid "Manipulator Gizmo Opacity"
-msgstr ""
+msgstr "マニピュレータギズモ不透明度"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 #, fuzzy
@@ -12334,14 +12398,18 @@ msgid "Override all default type items."
 msgstr "すべてのデフォルトタイプのアイテムをオーバーライドする。"
 
 #: editor/plugins/theme_editor_plugin.cpp
+#, fuzzy
 msgid "Select the variation base type from a list of available types."
-msgstr ""
+msgstr "使用可能なタイプのリストからバリエーション基底型を選択。"
 
 #: editor/plugins/theme_editor_plugin.cpp
+#, fuzzy
 msgid ""
 "A type associated with a built-in class cannot be marked as a variation of "
 "another type."
 msgstr ""
+"組み込みクラスに関連する型を、別の型のバリエーションとしてマークすることはで"
+"きません。"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Theme:"
@@ -14168,8 +14236,9 @@ msgid "Runnable"
 msgstr "実行可能"
 
 #: editor/project_export.cpp
+#, fuzzy
 msgid "Export the project for all the presets defined."
-msgstr ""
+msgstr "定義されたすべてのプリセットのプロジェクトをエクスポート。"
 
 #: editor/project_export.cpp
 msgid "All presets must have an export path defined for Export All to work."
@@ -15440,18 +15509,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "ローカルにする"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "ノード名:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "他の関数/変数/シグナルによりすでに使われている名前:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "ノード名:"
 
 #: editor/scene_tree_dock.cpp
@@ -15654,6 +15724,11 @@ msgid "Button Group"
 msgstr "ボタングループ"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "ノード名:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(接続元)"
 
@@ -15729,6 +15804,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "無効なノード名。以下の文字は使えません:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "ノードの名前を変更"
 
@@ -17597,6 +17676,21 @@ msgstr "ソリューションをビルド"
 msgid "Auto Update Project"
 msgstr "名無しのプロジェクト"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "表示スケール"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "ディレクトリを選択"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "ディレクトリを選択"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "内部例外スタックトレースの終了"
@@ -17703,12 +17797,14 @@ msgid "Persistence"
 msgstr "透視投影"
 
 #: modules/opensimplex/open_simplex_noise.cpp
+#, fuzzy
 msgid "Lacunarity"
-msgstr ""
+msgstr "空隙性"
 
 #: modules/regex/regex.cpp
+#, fuzzy
 msgid "Subject"
-msgstr ""
+msgstr "対象"
 
 #: modules/regex/regex.cpp
 #, fuzzy
@@ -17718,47 +17814,52 @@ msgstr "名前"
 #: modules/regex/regex.cpp
 #, fuzzy
 msgid "Strings"
-msgstr "設定:"
+msgstr "文字列"
 
 #: modules/upnp/upnp.cpp
+#, fuzzy
 msgid "Discover Multicast If"
-msgstr ""
+msgstr "マルチキャストの検出"
 
 #: modules/upnp/upnp.cpp
+#, fuzzy
 msgid "Discover Local Port"
-msgstr ""
+msgstr "ローカルポートの検出"
 
 #: modules/upnp/upnp.cpp
+#, fuzzy
 msgid "Discover IPv6"
-msgstr ""
+msgstr "IPv6 の検出"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
 msgid "Description URL"
-msgstr "説明"
+msgstr "説明 URL"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
 msgid "Service Type"
-msgstr "変数の型を設定"
+msgstr "サービス種類"
 
 #: modules/upnp/upnp_device.cpp
+#, fuzzy
 msgid "IGD Control URL"
-msgstr ""
+msgstr "IGD コントロール URL"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
 msgid "IGD Service Type"
-msgstr "変数の型を設定"
+msgstr "IGD サービス 種類"
 
 #: modules/upnp/upnp_device.cpp
+#, fuzzy
 msgid "IGD Our Addr"
-msgstr ""
+msgstr "IGD 当方アドレス"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
 msgid "IGD Status"
-msgstr "ステータス"
+msgstr "IGD 状態"
 
 #: modules/visual_script/visual_script.cpp
 msgid ""
@@ -19463,6 +19564,11 @@ msgstr "ノードを切り取る"
 msgid "Custom BG Color"
 msgstr "ノードを切り取る"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "すべて展開"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20317,6 +20423,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "パッケージのショートネームが無効です。"
 
diff --git a/editor/translations/ka.po b/editor/translations/ka.po
index 2e6e0e70e7..f085051bf7 100644
--- a/editor/translations/ka.po
+++ b/editor/translations/ka.po
@@ -4539,6 +4539,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7343,7 +7344,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15330,18 +15332,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "მოშორება"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "მოშორება"
 
 #: editor/scene_tree_dock.cpp
@@ -15538,6 +15540,11 @@ msgstr ""
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "მოშორება"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "დამაკავშირებელი სიგნალი:"
 
@@ -15602,6 +15609,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17465,6 +17476,20 @@ msgstr "ყველა მონიშნვა"
 msgid "Auto Update Project"
 msgstr "პროექტის დამფუძნებლები"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "ყველას ჩანაცვლება"
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "პროექტის დამფუძნებლები"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19238,6 +19263,11 @@ msgstr "ანიმაციის გასაღებების ასლ�
 msgid "Custom BG Color"
 msgstr "ანიმაციის გასაღებების ასლის შექმნა"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "ანიმაციის გარდაქმნის ცვლილება"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -20056,6 +20086,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "არასწორი ფონტის ზომა."
diff --git a/editor/translations/km.po b/editor/translations/km.po
index 522cb30363..3d39686d68 100644
--- a/editor/translations/km.po
+++ b/editor/translations/km.po
@@ -4327,6 +4327,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7005,7 +7006,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14685,18 +14687,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "បញ្ចូល Key នៅទីនេះ"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "បញ្ចូល Key នៅទីនេះ"
 
 #: editor/scene_tree_dock.cpp
@@ -14886,6 +14888,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "បញ្ចូល Key នៅទីនេះ"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -14949,6 +14956,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16729,6 +16740,18 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18415,6 +18438,10 @@ msgstr ""
 msgid "Custom BG Color"
 msgstr ""
 
+#: platform/iphone/export/export.cpp
+msgid "Export Icons"
+msgstr ""
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19194,6 +19221,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/ko.po b/editor/translations/ko.po
index a91450dd41..e3edb07ce4 100644
--- a/editor/translations/ko.po
+++ b/editor/translations/ko.po
@@ -36,13 +36,15 @@
 # Seonghyeon Cho <seonghyeoncho96@gmail.com>, 2022.
 # Haoyu Qiu <timothyqiu32@gmail.com>, 2022.
 # 김태우 <ogosengi3@gmail.com>, 2022.
+# 박민규 <80dots@gmail.com>, 2022.
+# 이지민 <jiminaleejung@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-06-26 16:16+0000\n"
-"Last-Translator: 김태우 <ogosengi3@gmail.com>\n"
+"PO-Revision-Date: 2022-09-07 06:16+0000\n"
+"Last-Translator: 이지민 <jiminaleejung@gmail.com>\n"
 "Language-Team: Korean <https://hosted.weblate.org/projects/godot-engine/"
 "godot/ko/>\n"
 "Language: ko\n"
@@ -50,7 +52,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -387,9 +389,8 @@ msgid "Max Size (KB)"
 msgstr "최대 크기(KB)"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Mouse Mode"
-msgstr "이동 모드"
+msgstr "마우스 모드"
 
 #: core/os/input.cpp
 #, fuzzy
@@ -411,7 +412,7 @@ msgstr "Shift"
 
 #: core/os/input_event.cpp
 msgid "Control"
-msgstr "조작"
+msgstr "Control"
 
 #: core/os/input_event.cpp
 msgid "Meta"
@@ -422,9 +423,8 @@ msgid "Command"
 msgstr "명령"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr " (물리)"
+msgstr "물리"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
@@ -680,14 +680,12 @@ msgid "Script Templates Search Path"
 msgstr "스크립트 템플릿 검색 경로"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Autoload On Startup"
-msgstr "스타트업으로 자동 로드"
+msgstr "시작할 때 자동으로 Version Control 로드"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Plugin Name"
-msgstr "버전 컨트롤"
+msgstr "버전 컨트롤 플러그인 이름"
 
 #: core/project_settings.cpp scene/2d/collision_object_2d.cpp
 #: scene/3d/collision_object.cpp scene/gui/control.cpp
@@ -2757,12 +2755,11 @@ msgstr "선택"
 
 #: editor/editor_export.cpp
 msgid "Project export for platform:"
-msgstr ""
+msgstr "플랫폼으로 프로젝트 내보내기:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "파일 경로 완성"
+msgstr "완료하였지만 경고가 있습니다."
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -2770,9 +2767,8 @@ msgid "Completed successfully."
 msgstr "패키지를 성공적으로 설치했습니다!"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed."
-msgstr "실패함:"
+msgstr "실패함."
 
 #: editor/editor_export.cpp
 msgid "Storing File:"
@@ -2787,29 +2783,24 @@ msgid "Packing"
 msgstr "패킹 중"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save PCK"
-msgstr "다른 이름으로 저장"
+msgstr "PCK를 저장합니다."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Cannot create file \"%s\"."
-msgstr "폴더를 만들 수 없습니다."
+msgstr "\"%s\" 파일을 생성할 수 없습니다."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to export project files."
-msgstr "프로젝트 파일을 내보낼 수 없었습니다"
+msgstr "프로젝트 파일을 내보낼 수 없습니다."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Can't open file to read from path \"%s\"."
-msgstr "파일을 쓰기 모드로 열 수 없음:"
+msgstr "\"%s\" 경로의 파일을 읽기 위해 열지 못했습니다."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save ZIP"
-msgstr "다른 이름으로 저장"
+msgstr "ZIP파일로 저장"
 
 #: editor/editor_export.cpp
 msgid ""
@@ -2934,14 +2925,12 @@ msgid "Prepare Template"
 msgstr "템플릿 관리"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "The given export path doesn't exist."
-msgstr "주어진 내보내기 경로가 없음:"
+msgstr "Export하려고 했으나 해당 경로가 존재하지 않습니다."
 
 #: editor/editor_export.cpp platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Template file not found: \"%s\"."
-msgstr "템플릿 파일을 찾을 수 없습니다:"
+msgstr "템플릿 파일을 찾을 수 없습니다: \"%s\""
 
 #: editor/editor_export.cpp
 #, fuzzy
@@ -4486,6 +4475,7 @@ msgstr "프로젝트 또는 씬 관련 여러가지 툴."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "프로젝트"
 
@@ -5194,9 +5184,8 @@ msgstr ""
 "있도록 정의해주세요."
 
 #: editor/editor_run_native.cpp
-#, fuzzy
 msgid "Project Run"
-msgstr "프로젝트"
+msgstr "프로젝트 실행"
 
 #: editor/editor_run_script.cpp
 msgid "Write your logic in the _run() method."
@@ -5374,7 +5363,7 @@ msgstr "썸네일 크기"
 
 #: editor/editor_settings.cpp
 msgid "Docks"
-msgstr "결합"
+msgstr "독"
 
 #: editor/editor_settings.cpp
 msgid "Scene Tree"
@@ -5478,9 +5467,8 @@ msgid "Mouse Extra Buttons Navigate History"
 msgstr "마우스 부가 버튼으로 히스토리 둘러보기"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Drag And Drop Selection"
-msgstr "그리드맵 선택"
+msgstr "선택된 항목을 Drag and drop"
 
 #: editor/editor_settings.cpp
 msgid "Stay In Script Editor On Node Selected"
@@ -5766,7 +5754,7 @@ msgstr "줌 방식"
 
 #: editor/editor_settings.cpp
 msgid "Emulate Numpad"
-msgstr "숫자 패드 모방"
+msgstr "숫자패드 모방"
 
 #: editor/editor_settings.cpp
 msgid "Emulate 3 Button Mouse"
@@ -6106,12 +6094,11 @@ msgstr "행 번호:"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Caret Color"
-msgstr ""
+msgstr "탈자 기호 색"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Caret Background Color"
-msgstr "잘못된 배경 색상."
+msgstr "탈자 기호 배경 색"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -7326,7 +7313,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -12594,7 +12582,7 @@ msgstr "콜리전"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Occlusion"
-msgstr "어클루전"
+msgstr "오클루전"
 
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/touch_screen_button.cpp
 msgid "Bitmask"
@@ -15343,18 +15331,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "로컬로 만들기"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "노드 이름:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "이미 다른 함수/변수/시그널로 사용된 이름:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "노드 이름:"
 
 #: editor/scene_tree_dock.cpp
@@ -15553,6 +15542,11 @@ msgid "Button Group"
 msgstr "버튼 그룹"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "노드 이름:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(연결 시작 지점)"
 
@@ -15628,6 +15622,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "잘못된 노드 이름입니다. 다음 문자는 허용하지 않습니다:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "노드 이름 바꾸기"
 
@@ -17551,6 +17549,21 @@ msgstr "솔루션 빌드"
 msgid "Auto Update Project"
 msgstr "이름 없는 프로젝트"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "모두 표시"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "디렉토리를 선택하세요"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "디렉토리를 선택하세요"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "내부 예외 스택 추적의 끝"
@@ -19424,6 +19437,11 @@ msgstr "노드 잘라내기"
 msgid "Custom BG Color"
 msgstr "노드 잘라내기"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "모두 펼치기"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20195,9 +20213,8 @@ msgid "Certificate"
 msgstr "정점:"
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Algorithm"
-msgstr "디버거"
+msgstr "알고리즘"
 
 #: platform/uwp/export/export.cpp
 msgid "Major"
@@ -20213,9 +20230,8 @@ msgid "Build"
 msgstr "자 모드"
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Revision"
-msgstr "표현식 설정"
+msgstr "개정"
 
 #: platform/uwp/export/export.cpp
 msgid "Landscape"
@@ -20282,6 +20298,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "잘못된 패키지 단축 이름."
 
@@ -22620,9 +22642,8 @@ msgid "Alpha Scissor Threshold"
 msgstr ""
 
 #: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp scene/resources/material.cpp
-#, fuzzy
 msgid "Render Priority"
-msgstr "우선 순위 활성화"
+msgstr "렌더 우선 순위"
 
 #: scene/3d/label_3d.cpp
 #, fuzzy
@@ -24599,7 +24620,7 @@ msgstr ""
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
 msgid "Caret"
-msgstr ""
+msgstr "탈자 기호"
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
 msgid "Blink"
diff --git a/editor/translations/lt.po b/editor/translations/lt.po
index 66891e3f0e..e89e801a9b 100644
--- a/editor/translations/lt.po
+++ b/editor/translations/lt.po
@@ -4505,6 +4505,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7325,7 +7326,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15320,18 +15322,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Panaikinti"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Panaikinti"
 
 #: editor/scene_tree_dock.cpp
@@ -15528,6 +15530,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Panaikinti"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15592,6 +15599,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17461,6 +17472,20 @@ msgstr "Visas Pasirinkimas"
 msgid "Auto Update Project"
 msgstr "Redaguoti Filtrus"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Importuoti iš Nodo:"
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Aprašymas:"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19243,6 +19268,11 @@ msgstr "Transition Nodas"
 msgid "Custom BG Color"
 msgstr "Transition Nodas"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Importuoti iš Nodo:"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -20077,6 +20107,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Netinkamas šrifto dydis."
diff --git a/editor/translations/lv.po b/editor/translations/lv.po
index c00e8d1a44..7234ac270a 100644
--- a/editor/translations/lv.po
+++ b/editor/translations/lv.po
@@ -4570,6 +4570,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekts"
 
@@ -7384,7 +7385,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15138,18 +15140,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Mezgla Vārds:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Mezgla Vārds:"
 
 #: editor/scene_tree_dock.cpp
@@ -15339,6 +15341,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Mezgla Vārds:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Savienojas No)"
 
@@ -15404,6 +15411,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17268,6 +17279,21 @@ msgstr "Būvēt risinājumu"
 msgid "Auto Update Project"
 msgstr "Nenosaukts Projekts"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Parādīt Visu"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Izvēlēties Direktoriju"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Izvēlēties Direktoriju"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19049,6 +19075,11 @@ msgstr "Izgriezt mezglu(s)"
 msgid "Custom BG Color"
 msgstr "Izgriezt mezglu(s)"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Izvērst apakšējo paneli"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19886,6 +19917,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Nederīgs paketes īsais nosaukums."
 
diff --git a/editor/translations/mk.po b/editor/translations/mk.po
index 2d183ec609..d0be6e7036 100644
--- a/editor/translations/mk.po
+++ b/editor/translations/mk.po
@@ -4340,6 +4340,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7030,7 +7031,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14718,18 +14720,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Внеси клуч тука"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Внеси клуч тука"
 
 #: editor/scene_tree_dock.cpp
@@ -14919,6 +14921,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Внеси клуч тука"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -14982,6 +14989,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16767,6 +16778,18 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18459,6 +18482,10 @@ msgstr ""
 msgid "Custom BG Color"
 msgstr ""
 
+#: platform/iphone/export/export.cpp
+msgid "Export Icons"
+msgstr ""
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19238,6 +19265,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/ml.po b/editor/translations/ml.po
index 7568bc881e..35845df066 100644
--- a/editor/translations/ml.po
+++ b/editor/translations/ml.po
@@ -4357,6 +4357,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7047,7 +7048,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14742,18 +14744,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "ചലനത്തിൻറെ നേരം മാറ്റുക"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "ചലനത്തിൻറെ നേരം മാറ്റുക"
 
 #: editor/scene_tree_dock.cpp
@@ -14943,6 +14945,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "ചലനത്തിൻറെ നേരം മാറ്റുക"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15006,6 +15013,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16792,6 +16803,18 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18490,6 +18513,11 @@ msgstr "പ്രവൃത്തികൾ:"
 msgid "Custom BG Color"
 msgstr "പ്രവൃത്തികൾ:"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "ത്രിമാന പരിവർത്തനം നോക്കുക"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19278,6 +19306,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/mr.po b/editor/translations/mr.po
index 4bdf5ba4fb..6baf1dc52e 100644
--- a/editor/translations/mr.po
+++ b/editor/translations/mr.po
@@ -4351,6 +4351,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7044,7 +7045,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14736,18 +14738,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "अ‍ॅनिमेशन नाव:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "अ‍ॅनिमेशन नाव:"
 
 #: editor/scene_tree_dock.cpp
@@ -14937,6 +14939,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "अ‍ॅनिमेशन नाव:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15000,6 +15007,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16793,6 +16804,19 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "प्ले मोड:"
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18491,6 +18515,10 @@ msgstr ""
 msgid "Custom BG Color"
 msgstr ""
 
+#: platform/iphone/export/export.cpp
+msgid "Export Icons"
+msgstr ""
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19279,6 +19307,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/ms.po b/editor/translations/ms.po
index 61a60ad8fe..adb377d13a 100644
--- a/editor/translations/ms.po
+++ b/editor/translations/ms.po
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-06-12 13:19+0000\n"
+"PO-Revision-Date: 2022-09-09 12:36+0000\n"
 "Last-Translator: Keviindran Ramachandran <keviinx@yahoo.com>\n"
 "Language-Team: Malay <https://hosted.weblate.org/projects/godot-engine/godot/"
 "ms/>\n"
@@ -25,7 +25,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -361,14 +361,12 @@ msgid "Max Size (KB)"
 msgstr "Saiz Maksimum (KB)"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Mouse Mode"
-msgstr "Mod Alih"
+msgstr "Mod Tetikus"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Use Accumulated Input"
-msgstr "Padam Input"
+msgstr "Gunakan Input Terkumpul"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: servers/audio_server.cpp
@@ -396,9 +394,8 @@ msgid "Command"
 msgstr "Perintah"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr "Fizik"
+msgstr "Fizikal"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
@@ -452,7 +449,7 @@ msgstr "Tekanan"
 
 #: core/os/input_event.cpp
 msgid "Pen Inverted"
-msgstr ""
+msgstr "Pen Terbalik"
 
 #: core/os/input_event.cpp
 msgid "Relative"
@@ -642,9 +639,8 @@ msgid "Main Run Args"
 msgstr "Jalan Utama Args"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Scene Naming"
-msgstr "Laluan Adegan:"
+msgstr "Penamaan Adegan"
 
 #: core/project_settings.cpp
 msgid "Search In File Extensions"
@@ -655,14 +651,12 @@ msgid "Script Templates Search Path"
 msgstr "Laluan Carian Templat Skrip"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Autoload On Startup"
-msgstr "Muatkan Automatik Semasa Permulaan"
+msgstr "Automuat Kawalan Versi Semasa Permulaan"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Plugin Name"
-msgstr "Kawalan Versi"
+msgstr "Nama Plugin Kawalan Versi"
 
 #: core/project_settings.cpp scene/2d/collision_object_2d.cpp
 #: scene/3d/collision_object.cpp scene/gui/control.cpp
@@ -4516,6 +4510,7 @@ msgstr "Pelbagai projek atau alatan seluruh adegan."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projek"
 
@@ -7405,7 +7400,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15296,18 +15292,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nama Nod:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nama Nod:"
 
 #: editor/scene_tree_dock.cpp
@@ -15501,6 +15497,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nama Nod:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15564,6 +15565,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17453,6 +17458,21 @@ msgstr "Semua Pilihan"
 msgid "Auto Update Project"
 msgstr "Projek"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Paparkan Semua"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Pilih Direktori"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Pilih Direktori"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19254,6 +19274,11 @@ msgstr "Potong Nod"
 msgid "Custom BG Color"
 msgstr "Potong Nod"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Kembangkan Semua"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20093,6 +20118,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/nb.po b/editor/translations/nb.po
index 542d5987ca..b39bc2a602 100644
--- a/editor/translations/nb.po
+++ b/editor/translations/nb.po
@@ -4690,6 +4690,7 @@ msgstr "Diverse prosjekt- eller scene-relaterte verktøy"
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Prosjekt"
 
@@ -7654,7 +7655,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15944,18 +15946,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Lag Ben"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nodenavn:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Navnet er allerede i bruk av annen funk/var/signal:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nodenavn:"
 
 #: editor/scene_tree_dock.cpp
@@ -16164,6 +16167,11 @@ msgstr "Legg til i Gruppe"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nodenavn:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Tilkoblingsfeil"
 
@@ -16228,6 +16236,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -18184,6 +18196,21 @@ msgstr "Alle valg"
 msgid "Auto Update Project"
 msgstr "Eksporter Prosjekt"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Vis alle"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Velg en Mappe"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Velg en Mappe"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -20053,6 +20080,11 @@ msgstr "Klipp ut Noder"
 msgid "Custom BG Color"
 msgstr "Klipp ut Noder"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Utvid alle"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20905,6 +20937,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Ugyldig navn."
diff --git a/editor/translations/nl.po b/editor/translations/nl.po
index aaa0f38a1d..9410069ae4 100644
--- a/editor/translations/nl.po
+++ b/editor/translations/nl.po
@@ -58,13 +58,15 @@
 # Rémi Verschelde <remi@godotengine.org>, 2022.
 # Wouter <mysticaldev@hotmail.com>, 2022.
 # voylin <0voylin0@gmail.com>, 2022.
+# Gert-dev <qnyasgjhapqyuhoibr@kiabws.com>, 2022.
+# Nnn <irri2020@outlook.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-03-17 13:58+0000\n"
-"Last-Translator: voylin <0voylin0@gmail.com>\n"
+"PO-Revision-Date: 2022-08-30 03:11+0000\n"
+"Last-Translator: Nnn <irri2020@outlook.com>\n"
 "Language-Team: Dutch <https://hosted.weblate.org/projects/godot-engine/godot/"
 "nl/>\n"
 "Language: nl\n"
@@ -72,110 +74,97 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.12-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
-msgstr ""
+msgstr "Tablet-stuurprogramma"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Clipboard"
-msgstr "Plakbord is leeg!"
+msgstr "Klembord"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Current Screen"
-msgstr "Huidige scène"
+msgstr "Huidig scherm"
 
 #: core/bind/core_bind.cpp
 msgid "Exit Code"
-msgstr ""
+msgstr "Afsluitcode"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "V-Sync Enabled"
-msgstr "Inschakelen"
+msgstr "V-Sync ingeschakeld"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "V-Sync Via Compositor"
-msgstr ""
+msgstr "V-Sync via compositor"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Delta Smoothing"
-msgstr ""
+msgstr "Delta-gladmaken"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Low Processor Usage Mode"
-msgstr "Verplaatsingsmodus"
+msgstr "Lage energieverbruiksmodus processor"
 
 #: core/bind/core_bind.cpp
 msgid "Low Processor Usage Mode Sleep (µsec)"
-msgstr ""
+msgstr "Lage energieverbruiksmodus processor slaap (µs)"
 
 #: core/bind/core_bind.cpp main/main.cpp platform/uwp/os_uwp.cpp
-#, fuzzy
 msgid "Keep Screen On"
-msgstr "Houd Debugger Open"
+msgstr "Scherm aanhouden"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Min Window Size"
-msgstr "Omlijningsgrootte:"
+msgstr "Minimale venstergrootte"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Max Window Size"
-msgstr "Omlijningsgrootte:"
+msgstr "Maximale venstergrootte"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Screen Orientation"
-msgstr "Scherm operator."
+msgstr "Schermoriëntering"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp main/main.cpp
 #: platform/uwp/os_uwp.cpp
-#, fuzzy
 msgid "Window"
-msgstr "Nieuw Venster"
+msgstr "Venster"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp
-#, fuzzy
 msgid "Borderless"
-msgstr "Randpixels"
+msgstr "Naadloos"
 
 #: core/bind/core_bind.cpp
 msgid "Per Pixel Transparency Enabled"
-msgstr ""
+msgstr "Transparantie per pixel ingeschakeld"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp
-#, fuzzy
 msgid "Fullscreen"
 msgstr "Volledig scherm"
 
 #: core/bind/core_bind.cpp
 msgid "Maximized"
-msgstr ""
+msgstr "Gemaximaliseerd"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Minimized"
-msgstr "Initialiseren"
+msgstr "Geminimaliseerd"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp scene/gui/dialogs.cpp
 #: scene/gui/graph_node.cpp
 msgid "Resizable"
-msgstr ""
+msgstr "Verstelbare grootte"
 
 #: core/bind/core_bind.cpp core/os/input_event.cpp scene/2d/node_2d.cpp
 #: scene/2d/physics_body_2d.cpp scene/2d/remote_transform_2d.cpp
 #: scene/3d/physics_body.cpp scene/3d/remote_transform.cpp
 #: scene/gui/control.cpp scene/gui/line_edit.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Position"
-msgstr "Tabbladpositie"
+msgstr "Positie"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp editor/editor_settings.cpp
 #: main/main.cpp modules/gridmap/grid_map.cpp
@@ -186,65 +175,56 @@ msgstr "Tabbladpositie"
 #: scene/resources/primitive_meshes.cpp scene/resources/sky.cpp
 #: scene/resources/style_box.cpp scene/resources/texture.cpp
 #: scene/resources/visual_shader.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "Size"
-msgstr "Grootte: "
+msgstr "Grootte"
 
 #: core/bind/core_bind.cpp
 msgid "Endian Swap"
-msgstr ""
+msgstr "Endian omwisselen"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Editor Hint"
-msgstr "Editor"
+msgstr "Editor-hint"
 
 #: core/bind/core_bind.cpp
 msgid "Print Error Messages"
-msgstr ""
+msgstr "Foutboodschappen tonen"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Iterations Per Second"
-msgstr "Interpolatiemodus"
+msgstr "Iteraties per seconde"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Target FPS"
-msgstr "Doel"
+msgstr "Beoogde FPS"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Time Scale"
-msgstr "Tijdschaalknoop"
+msgstr "Tijdschaal"
 
 #: core/bind/core_bind.cpp main/main.cpp
-#, fuzzy
 msgid "Physics Jitter Fix"
-msgstr "Physics Frame %"
+msgstr "Oplossing Jitter Fysica"
 
 #: core/bind/core_bind.cpp editor/plugins/version_control_editor_plugin.cpp
 msgid "Error"
 msgstr "Fout"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Error String"
-msgstr "Fout bij het opslaan"
+msgstr "Foutboodschap"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Error Line"
-msgstr "Fout bij het opslaan"
+msgstr "Lijn fout"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Result"
-msgstr "Zoek Resultaten"
+msgstr "Resultaat"
 
 #: core/command_queue_mt.cpp core/message_queue.cpp main/main.cpp
 msgid "Memory"
-msgstr ""
+msgstr "Geheugen"
 
 #: core/command_queue_mt.cpp core/message_queue.cpp
 #: core/register_core_types.cpp drivers/gles2/rasterizer_canvas_base_gles2.cpp
@@ -255,12 +235,11 @@ msgstr ""
 #: modules/webrtc/webrtc_data_channel.h modules/websocket/websocket_macros.h
 #: servers/visual_server.cpp
 msgid "Limits"
-msgstr ""
+msgstr "Limieten"
 
 #: core/command_queue_mt.cpp
-#, fuzzy
 msgid "Command Queue"
-msgstr "Ctrl: Roteer"
+msgstr "Commandowachtrij"
 
 #: core/command_queue_mt.cpp
 msgid "Multithreading Queue Size (KB)"
@@ -294,9 +273,8 @@ msgid "Remote FS"
 msgstr "Remote "
 
 #: core/io/file_access_network.cpp
-#, fuzzy
 msgid "Page Size"
-msgstr "Pagina: "
+msgstr "Pagina grootte"
 
 #: core/io/file_access_network.cpp
 msgid "Page Read Ahead"
@@ -307,9 +285,8 @@ msgid "Blocking Mode Enabled"
 msgstr ""
 
 #: core/io/http_client.cpp
-#, fuzzy
 msgid "Connection"
-msgstr "Verbinden"
+msgstr "Verbinding"
 
 #: core/io/http_client.cpp
 msgid "Read Chunk Size"
@@ -497,9 +474,8 @@ msgid "Pressed"
 msgstr "Voorinstellingen"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Scancode"
-msgstr "Inlezen"
+msgstr "Scancode"
 
 #: core/os/input_event.cpp
 msgid "Physical Scancode"
@@ -507,7 +483,7 @@ msgstr ""
 
 #: core/os/input_event.cpp
 msgid "Unicode"
-msgstr ""
+msgstr "Unicode"
 
 #: core/os/input_event.cpp
 msgid "Echo"
@@ -980,7 +956,7 @@ msgstr ""
 
 #: core/register_core_types.cpp
 msgid "TCP"
-msgstr ""
+msgstr "TCP"
 
 #: core/register_core_types.cpp
 #, fuzzy
@@ -4694,6 +4670,7 @@ msgstr "Overig project of scène-brede hulpmiddelen."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Project"
 
@@ -5608,7 +5585,7 @@ msgstr "Voorbeeld..."
 
 #: editor/editor_settings.cpp
 msgid "Docks"
-msgstr ""
+msgstr "panelen"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -7246,7 +7223,7 @@ msgstr ""
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp
 msgid "sRGB"
-msgstr ""
+msgstr "sRGB"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #, fuzzy
@@ -7642,7 +7619,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -9765,7 +9743,7 @@ msgstr "Plat 0"
 
 #: editor/plugins/curve_editor_plugin.cpp
 msgid "Flat 1"
-msgstr "Plat 1"
+msgstr "Vlak 1"
 
 #: editor/plugins/curve_editor_plugin.cpp editor/property_editor.cpp
 msgid "Ease In"
@@ -11497,7 +11475,7 @@ msgstr "Hoekpunten"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "FPS: %d (%s ms)"
-msgstr ""
+msgstr "FPS: %d (%s ms)"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Top View."
@@ -15838,18 +15816,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Maak locaal"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Knoopnaam:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Naam wordt al gebruikt door een andere functie, variabele of signaal:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Knoopnaam:"
 
 #: editor/scene_tree_dock.cpp
@@ -16047,6 +16026,11 @@ msgid "Button Group"
 msgstr "Knoppen Groep"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Knoopnaam:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Verbonden vanaf)"
 
@@ -16122,6 +16106,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Ongeldige knoopnaam, deze karakters zijn niet toegestaan:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Knoop hernoemen"
 
@@ -18052,6 +18040,21 @@ msgstr "Vul selectie"
 msgid "Auto Update Project"
 msgstr "Naamloos Project"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Alles tonen"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Kies een map"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Kies een map"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Einde van innerlijke exception stack trace"
@@ -18613,7 +18616,7 @@ msgstr ""
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "While"
-msgstr ""
+msgstr "Terwijl"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "while (cond):"
@@ -18952,7 +18955,7 @@ msgstr "Zoek VisualScript"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "Yield"
-msgstr ""
+msgstr "Opgeven"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "Wait"
@@ -19934,6 +19937,11 @@ msgstr "Knopen knippen"
 msgid "Custom BG Color"
 msgstr "Knopen knippen"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Alles uitklappen"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20791,6 +20799,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Ongeldige pakket korte naam."
 
@@ -25121,7 +25135,7 @@ msgstr ""
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
 msgid "Caret"
-msgstr ""
+msgstr "Invoercursor"
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
 msgid "Blink"
@@ -28727,7 +28741,7 @@ msgstr ""
 #: servers/visual_server.cpp
 #, fuzzy
 msgid "Use Batching In Editor"
-msgstr "Editor afsluiten?"
+msgstr "Gebruik Batching In Editor"
 
 #: servers/visual_server.cpp
 msgid "Single Rect Fallback"
@@ -28785,9 +28799,8 @@ msgid "Enable High Float"
 msgstr "Prioriteit Inschakelen"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Precision"
-msgstr "Stel expressie in"
+msgstr "Precisie"
 
 #: servers/visual_server.cpp
 msgid "UV Contract"
diff --git a/editor/translations/pl.po b/editor/translations/pl.po
index 3e4664c317..7b7e680cff 100644
--- a/editor/translations/pl.po
+++ b/editor/translations/pl.po
@@ -63,13 +63,14 @@
 # DK0492 <doriankaczmarek28@gmail.com>, 2022.
 # Dawid Skubij <davidsd@tlen.pl>, 2022.
 # kingofsponges <q.patex.q@gmail.com>, 2022.
+# Patryk Morawski <gormit7@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-08-04 06:38+0000\n"
-"Last-Translator: kingofsponges <q.patex.q@gmail.com>\n"
+"PO-Revision-Date: 2022-08-17 18:20+0000\n"
+"Last-Translator: Patryk Morawski <gormit7@gmail.com>\n"
 "Language-Team: Polish <https://hosted.weblate.org/projects/godot-engine/"
 "godot/pl/>\n"
 "Language: pl\n"
@@ -4384,7 +4385,7 @@ msgstr "Zawsze Zamykaj Wyjście Po Zatrzymaniu"
 
 #: editor/editor_node.cpp
 msgid "Save On Focus Loss"
-msgstr ""
+msgstr "Zapisz przy utracie skupienia"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 #, fuzzy
@@ -4436,7 +4437,7 @@ msgstr "Ścieżka do projektu:"
 
 #: editor/editor_node.cpp
 msgid "Default Float Step"
-msgstr ""
+msgstr "Domyślny krok zmiennoprzecinkowy"
 
 #: editor/editor_node.cpp scene/gui/tree.cpp
 #, fuzzy
@@ -4445,15 +4446,15 @@ msgstr "Wyłączony przycisk"
 
 #: editor/editor_node.cpp
 msgid "Auto Unfold Foreign Scenes"
-msgstr ""
+msgstr "Automatyczne rozwijanie zagranicznych scen"
 
 #: editor/editor_node.cpp
 msgid "Horizontal Vector2 Editing"
-msgstr ""
+msgstr "Edycja pozioma Vector2"
 
 #: editor/editor_node.cpp
 msgid "Horizontal Vector Types Editing"
-msgstr ""
+msgstr "Edycja poziomych typów wektorów"
 
 #: editor/editor_node.cpp
 #, fuzzy
@@ -4578,6 +4579,7 @@ msgstr "Różne narzędzia dla scen lub projektu."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -5338,7 +5340,7 @@ msgstr "Pokaż wszystko"
 
 #: editor/editor_settings.cpp
 msgid "Custom Display Scale"
-msgstr ""
+msgstr "Niestandardowa skala wyświetlania"
 
 #: editor/editor_settings.cpp
 msgid "Main Font Size"
@@ -5346,15 +5348,15 @@ msgstr "Rozmiar głównej czcionki"
 
 #: editor/editor_settings.cpp
 msgid "Code Font Size"
-msgstr ""
+msgstr "Rozmiar czcionki kodu"
 
 #: editor/editor_settings.cpp
 msgid "Font Antialiased"
-msgstr ""
+msgstr "Wygładzana czcionka"
 
 #: editor/editor_settings.cpp
 msgid "Font Hinting"
-msgstr ""
+msgstr "Czcionka podpowiedzi"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5377,11 +5379,11 @@ msgstr "Przygaś edytor przy wyskakującym oknie"
 
 #: editor/editor_settings.cpp main/main.cpp
 msgid "Low Processor Mode Sleep (µsec)"
-msgstr ""
+msgstr "Niski tryb uśpienia procesora (µsec)"
 
 #: editor/editor_settings.cpp
 msgid "Unfocused Low Processor Mode Sleep (µsec)"
-msgstr ""
+msgstr "Nieskoncentrowany tryb uśpienia w trybie niskiego procesora (µsec)"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5394,7 +5396,7 @@ msgstr "Automatycznie otwieraj zrzuty ekranu"
 
 #: editor/editor_settings.cpp
 msgid "Max Array Dictionary Items Per Page"
-msgstr ""
+msgstr "Maksymalna liczba pozycji słownika tablicy na stronie"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
 #: editor/plugins/theme_editor_plugin.cpp scene/gui/control.cpp
@@ -5408,7 +5410,7 @@ msgstr "Profil"
 
 #: editor/editor_settings.cpp
 msgid "Icon And Font Color"
-msgstr ""
+msgstr "Kolor ikony i czcionki"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5426,7 +5428,7 @@ msgstr "Kontrast"
 
 #: editor/editor_settings.cpp
 msgid "Relationship Line Opacity"
-msgstr ""
+msgstr "Przezroczystość linii relacji"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5440,7 +5442,7 @@ msgstr "Brzegowe piksele"
 
 #: editor/editor_settings.cpp
 msgid "Use Graph Node Headers"
-msgstr ""
+msgstr "Użyj wykresu nagłówków węzłów"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5484,7 +5486,7 @@ msgstr "Kopiuj zasób"
 
 #: editor/editor_settings.cpp
 msgid "Safe Save On Backup Then Rename"
-msgstr ""
+msgstr "Bezpieczne zapisywanie kopii zapasowej, a następnie zmiana nazwy"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5507,7 +5509,7 @@ msgstr "Pozyskaj drzewo sceny"
 
 #: editor/editor_settings.cpp
 msgid "Start Create Dialog Fully Expanded"
-msgstr ""
+msgstr "Rozpocznij tworzenie w pełni rozwiniętego okna dialogowego"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5559,7 +5561,7 @@ msgstr "Podświetl obecną linię"
 
 #: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
 msgid "Highlight Type Safe Lines"
-msgstr ""
+msgstr "Wyróżnij typy bezpiecznych linii"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5598,7 +5600,7 @@ msgstr "Płynne przewijanie"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
 msgid "V Scroll Speed"
-msgstr ""
+msgstr "Pionowa szybkość przewijania"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5611,7 +5613,7 @@ msgstr "Szerokość minimapy"
 
 #: editor/editor_settings.cpp
 msgid "Mouse Extra Buttons Navigate History"
-msgstr ""
+msgstr "Historia nawigacji dodatkowych przycisków myszy"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5620,7 +5622,7 @@ msgstr "Wybór GridMap"
 
 #: editor/editor_settings.cpp
 msgid "Stay In Script Editor On Node Selected"
-msgstr ""
+msgstr "Pozostań w edytorze skryptów na wybranym węźle"
 
 #: editor/editor_settings.cpp
 msgid "Appearance"
@@ -5638,7 +5640,7 @@ msgstr "Numer linii:"
 
 #: editor/editor_settings.cpp
 msgid "Show Bookmark Gutter"
-msgstr ""
+msgstr "Pokaż ciek zakładek"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5647,23 +5649,23 @@ msgstr "Pomiń punkty wstrzymania"
 
 #: editor/editor_settings.cpp
 msgid "Show Info Gutter"
-msgstr ""
+msgstr "Pokaż ciek informacji"
 
 #: editor/editor_settings.cpp
 msgid "Code Folding"
-msgstr ""
+msgstr "Zawijanie kodu"
 
 #: editor/editor_settings.cpp
 msgid "Word Wrap"
-msgstr ""
+msgstr "Zawijanie tekstu"
 
 #: editor/editor_settings.cpp
 msgid "Show Line Length Guidelines"
-msgstr ""
+msgstr "Pokaż wytyczne dotyczące długości linii"
 
 #: editor/editor_settings.cpp
 msgid "Line Length Guideline Soft Column"
-msgstr ""
+msgstr "Wytyczne dotyczące długości linii miękkiej kolumny"
 
 #: editor/editor_settings.cpp
 msgid "Line Length Guideline Hard Column"
@@ -7517,7 +7519,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15574,18 +15577,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Uczyń lokalnym"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nazwa węzła:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Nazwa jest już użyta przez inną funkcję/zmienną/sygnał:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nazwa węzła:"
 
 #: editor/scene_tree_dock.cpp
@@ -15787,6 +15791,11 @@ msgid "Button Group"
 msgstr "Grupa przycisków"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nazwa węzła:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(łączony teraz)"
 
@@ -15862,6 +15871,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Nieprawidłowa nazwa węzła, następujące znaki są niedozwolone:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Zmień nazwę węzła"
 
@@ -17789,6 +17802,21 @@ msgstr "Zbuduj rozwiązanie"
 msgid "Auto Update Project"
 msgstr "Projekt bez nazwy"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Pokaż wszystko"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Wybierz katalog"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Wybierz katalog"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Koniec śladu stosu wewnętrznego wyjątku"
@@ -19645,6 +19673,11 @@ msgstr "NiestandardowyWęzeł"
 msgid "Custom BG Color"
 msgstr "NiestandardowyWęzeł"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Rozwiń wszystko"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20540,6 +20573,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Niepoprawna krótka nazwa paczki."
 
diff --git a/editor/translations/pr.po b/editor/translations/pr.po
index 4c073f8542..e8e4e5c79d 100644
--- a/editor/translations/pr.po
+++ b/editor/translations/pr.po
@@ -4494,6 +4494,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7309,7 +7310,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15326,18 +15328,20 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Discharge ye' Signal"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+"Yer name be backstabin'! She be used by another dastardly func/var/signal:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Discharge ye' Signal"
 
 #: editor/scene_tree_dock.cpp
@@ -15537,6 +15541,11 @@ msgstr ""
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Discharge ye' Signal"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Slit th' Node"
 
@@ -15601,6 +15610,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17481,6 +17494,20 @@ msgstr "All yer Booty"
 msgid "Auto Update Project"
 msgstr "Rename Function"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Slit th' Node"
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Yer functions:"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19295,6 +19322,11 @@ msgstr "Slit th' Node"
 msgid "Custom BG Color"
 msgstr "Slit th' Node"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Edit"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20127,6 +20159,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Yer unique name be evil."
diff --git a/editor/translations/pt.po b/editor/translations/pt.po
index f284e0ece8..271dcc1e8b 100644
--- a/editor/translations/pt.po
+++ b/editor/translations/pt.po
@@ -26,13 +26,15 @@
 # Esdras Caleb Oliveira Silva <acheicaleb@gmail.com>, 2022.
 # Ednaldo Pereira Confia <filat51823@storypo.com>, 2022.
 # Zé Beato Página Oficial <zebeato@gmail.com>, 2022.
+# Rafael Testa <rafael1testa@gmail.com>, 2022.
+# Baiterson <baiter160@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-23 03:57+0000\n"
-"Last-Translator: Zé Beato Página Oficial <zebeato@gmail.com>\n"
+"PO-Revision-Date: 2022-08-25 13:04+0000\n"
+"Last-Translator: Baiterson <baiter160@gmail.com>\n"
 "Language-Team: Portuguese <https://hosted.weblate.org/projects/godot-engine/"
 "godot/pt/>\n"
 "Language: pt\n"
@@ -410,9 +412,8 @@ msgid "Command"
 msgstr "Comando"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr " (Físico)"
+msgstr "Físico"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
@@ -466,7 +467,7 @@ msgstr "Pressione"
 
 #: core/os/input_event.cpp
 msgid "Pen Inverted"
-msgstr ""
+msgstr "Caneta Invertida"
 
 #: core/os/input_event.cpp
 msgid "Relative"
@@ -2754,9 +2755,8 @@ msgid "Project export for platform:"
 msgstr "Exportação do projeto para plataforma:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "Concluído com erros."
+msgstr "Concluído com advertências."
 
 #: editor/editor_export.cpp
 msgid "Completed successfully."
@@ -2779,29 +2779,24 @@ msgid "Packing"
 msgstr "Empacotamento"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save PCK"
-msgstr "Guardar Como"
+msgstr "Salvar Como PCK"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Cannot create file \"%s\"."
-msgstr "Não consegui criar pasta."
+msgstr "Não pôde criar arquivo \"%s\"."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to export project files."
-msgstr "Incapaz de exportar ficheiros do projeto"
+msgstr "Falha ao exportar arquivos do projeto."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Can't open file to read from path \"%s\"."
-msgstr "Incapaz de abrir o ficheiro para escrita:"
+msgstr "Incapaz de abrir o arquivo pelo caminho \"%s\"."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save ZIP"
-msgstr "Guardar Como"
+msgstr "Salvar como ZIP"
 
 #: editor/editor_export.cpp
 msgid ""
@@ -2862,9 +2857,8 @@ msgstr ""
 #: editor/editor_export.cpp platform/android/export/export_plugin.cpp
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Custom Template"
-msgstr "Editor de Tema"
+msgstr "Modelo customizado"
 
 #: editor/editor_export.cpp editor/project_export.cpp
 #: platform/android/export/export_plugin.cpp platform/iphone/export/export.cpp
@@ -2886,9 +2880,8 @@ msgid "Embed PCK"
 msgstr "Incorporar PCK"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Texture Format"
-msgstr "TextureRegion"
+msgstr "Formato de Textura"
 
 #: editor/editor_export.cpp
 msgid "BPTC"
@@ -2924,12 +2917,10 @@ msgid "Custom release template not found."
 msgstr "Modelo de lançamento personalizado não encontrado."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Prepare Template"
-msgstr "Gerir Modelos"
+msgstr "Preparar Modelos"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "The given export path doesn't exist."
 msgstr "O caminho de exportação não existe:"
 
@@ -2938,15 +2929,13 @@ msgid "Template file not found: \"%s\"."
 msgstr "Ficheiro Modelo não encontrado"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to copy export template."
-msgstr "Modelo de exportação inválido:"
+msgstr "Falha ao copiar Modelo de exportação."
 
 #: editor/editor_export.cpp platform/windows/export/export.cpp
 #: platform/x11/export/export.cpp
-#, fuzzy
 msgid "PCK Embedding"
-msgstr "Preenchimento"
+msgstr "Encorporar PCK"
 
 #: editor/editor_export.cpp
 msgid "On 32-bit exports the embedded PCK cannot be bigger than 4 GiB."
@@ -3160,9 +3149,8 @@ msgid "Manage Editor Feature Profiles"
 msgstr "Gerir Editor Perfis de Funcionalidades"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Default Feature Profile"
-msgstr "Perfil de Funcionalidades Godot"
+msgstr "Perfil de Funcionalidades padrão"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "Select Current Folder"
@@ -3252,9 +3240,8 @@ msgstr "Modo de Visualização"
 #: scene/resources/environment.cpp scene/resources/material.cpp
 #: scene/resources/visual_shader.cpp
 #: servers/audio/effects/audio_effect_distortion.cpp
-#, fuzzy
 msgid "Mode"
-msgstr "Modo deslocamento"
+msgstr "Modo"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
 msgid "Current Dir"
@@ -3270,9 +3257,8 @@ msgstr "Caminho Atual"
 
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp
 #: scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Show Hidden Files"
-msgstr "Alternar Ficheiros Escondidos"
+msgstr "Mostrar arquivos ocultos"
 
 #: editor/editor_file_dialog.cpp
 msgid "Disable Overwrite Warning"
@@ -3570,24 +3556,20 @@ msgid "Property:"
 msgstr "Propriedade:"
 
 #: editor/editor_inspector.cpp editor/editor_spin_slider.cpp
-#, fuzzy
 msgid "Label"
-msgstr "Valor"
+msgstr "Texto"
 
 #: editor/editor_inspector.cpp editor/editor_spin_slider.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Read Only"
-msgstr "Apenas Métodos"
+msgstr "Apenas Leitura"
 
 #: editor/editor_inspector.cpp editor/plugins/item_list_editor_plugin.cpp
-#, fuzzy
 msgid "Checkable"
 msgstr "Marcar item"
 
 #: editor/editor_inspector.cpp editor/plugins/item_list_editor_plugin.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Checked"
 msgstr "Item Marcado"
 
@@ -3596,7 +3578,6 @@ msgid "Draw Red"
 msgstr "Desenhar Vermelho"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Keying"
 msgstr "Executar"
 
@@ -3962,14 +3943,12 @@ msgid "Quick Open Script..."
 msgstr "Abrir Script de forma rápida..."
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Save & Reload"
-msgstr "Guardar & Reiniciar"
+msgstr "Salvar E Reiniciar"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Save changes to '%s' before reloading?"
-msgstr "Guardar alterações a '%s' antes de fechar?"
+msgstr "Salvar alterações '%s' antes de reiniciar?"
 
 #: editor/editor_node.cpp
 msgid "Save & Close"
@@ -4088,9 +4067,8 @@ msgid "Open Project Manager?"
 msgstr "Abrir Gestor de Projeto?"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Save changes to the following scene(s) before reloading?"
-msgstr "Guardar alterações da(s) seguinte(s) cena(s) antes de sair?"
+msgstr "Salvar alterações da(s) seguinte(s) cena(s) antes de reiniciar?"
 
 #: editor/editor_node.cpp
 msgid "Save & Quit"
@@ -4283,19 +4261,16 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/editor_settings.cpp editor/scene_tree_dock.cpp
 #: servers/arvr/arvr_interface.cpp
-#, fuzzy
 msgid "Interface"
-msgstr "Interface do Utilizador"
+msgstr "Interface"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Scene Tabs"
-msgstr "Trocar Aba de Cena"
+msgstr "Abas da Cena"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Always Show Close Button"
-msgstr "Mostrar Grelha Sempre"
+msgstr "Sempre mostrar o Botão de Fechar"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 msgid "Resize If Many Tabs"
@@ -4310,9 +4285,8 @@ msgid "Output"
 msgstr "Saída"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Always Clear Output On Play"
-msgstr "Limpar Saída"
+msgstr "Sempre Apagar Output quando Iniciar"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 msgid "Always Open Output On Play"
@@ -4327,19 +4301,16 @@ msgid "Save On Focus Loss"
 msgstr "Salvar ao Perder o Foco"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Save Each Scene On Quit"
-msgstr "Guardar Ramo como Cena"
+msgstr "Salvar Cada Cena ao Sair"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Quit Confirmation"
-msgstr "Ver informação"
+msgstr "Confirmação de Saida"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Show Update Spinner"
-msgstr "Esconder Roleta de Atualização"
+msgstr "Mostra Ícone de Atualização"
 
 #: editor/editor_node.cpp
 msgid "Update Continuously"
@@ -4350,14 +4321,12 @@ msgid "Update Vital Only"
 msgstr "Só Atualizar Vital"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Localize Settings"
-msgstr "Localização"
+msgstr "Configuração de tradução"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Restore Scenes On Load"
-msgstr "Obter Nó da Cena"
+msgstr "Restaurar Cenas quando carregar"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 msgid "Show Thumbnail On Hover"
@@ -4376,7 +4345,6 @@ msgid "Default Float Step"
 msgstr "FloatStep Padrão"
 
 #: editor/editor_node.cpp scene/gui/tree.cpp
-#, fuzzy
 msgid "Disable Folding"
 msgstr "Desativar Botão"
 
@@ -4393,14 +4361,12 @@ msgid "Horizontal Vector Types Editing"
 msgstr "Edição de Tipo de Vetor Horizontal"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Open Resources In Current Inspector"
-msgstr "Abrir no Inspetor"
+msgstr "Abrir Recursos no Inspetor atual"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Resources To Open In New Inspector"
-msgstr "Abrir no Inspetor"
+msgstr "Abrir Recursos em um novo Inspetor"
 
 #: editor/editor_node.cpp
 msgid "Default Color Picker Mode"
@@ -4514,6 +4480,7 @@ msgstr "Ferramentas diversas de projeto ou cena."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projeto"
 
@@ -4792,9 +4759,8 @@ msgid "Save & Restart"
 msgstr "Guardar & Reiniciar"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Update All Changes"
-msgstr "Atualizar quando há Alterações"
+msgstr "Atualizar todas as Mudanças"
 
 #: editor/editor_node.cpp
 msgid "Update Vital Changes"
@@ -5062,9 +5028,8 @@ msgid "Profiler Frame History Size"
 msgstr "Tamanho do Histórico do Perfilador de Quadro"
 
 #: editor/editor_profiler.cpp
-#, fuzzy
 msgid "Profiler Frame Max Functions"
-msgstr "Mudar nome da Função"
+msgstr "Profiler Frame Max Funções"
 
 #: editor/editor_properties.cpp
 msgid "Edit Text:"
@@ -5133,9 +5098,8 @@ msgid "Size:"
 msgstr "Tamanho:"
 
 #: editor/editor_properties_array_dict.cpp
-#, fuzzy
 msgid "Page:"
-msgstr "Página: "
+msgstr "Página:"
 
 #: editor/editor_properties_array_dict.cpp
 #: editor/plugins/theme_editor_plugin.cpp
@@ -5197,18 +5161,15 @@ msgstr "Novo %s"
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_nodes.cpp
 #: modules/visual_script/visual_script_yield_nodes.cpp
-#, fuzzy
 msgid "Base Type"
 msgstr "Mudar tipo base"
 
 #: editor/editor_resource_picker.cpp
-#, fuzzy
 msgid "Edited Resource"
-msgstr "Adicionar recurso"
+msgstr "Recurso Editado"
 
 #: editor/editor_resource_picker.cpp scene/gui/line_edit.cpp
 #: scene/gui/slider.cpp scene/gui/spin_box.cpp
-#, fuzzy
 msgid "Editable"
 msgstr "Item Editável"
 
@@ -5236,7 +5197,6 @@ msgstr ""
 "definido existente como executável."
 
 #: editor/editor_run_native.cpp
-#, fuzzy
 msgid "Project Run"
 msgstr "Projeto"
 
@@ -5265,14 +5225,12 @@ msgid "Did you forget the '_run' method?"
 msgstr "Esqueceu-se do método '_run'?"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Editor Language"
-msgstr "Apresentação do Editor"
+msgstr "Linguagem do Editor"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Display Scale"
-msgstr "Mostrar Tudo"
+msgstr "Escala do Editor"
 
 #: editor/editor_settings.cpp
 msgid "Custom Display Scale"
@@ -5295,18 +5253,16 @@ msgid "Font Hinting"
 msgstr "Alinhar Fonte"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Main Font"
-msgstr "Cena Principal"
+msgstr "Fonte Principal"
 
 #: editor/editor_settings.cpp
 msgid "Main Font Bold"
 msgstr "Fonte Principal em Negrito"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Code Font"
-msgstr "Adicionar Ponto Nó"
+msgstr "Fonte do Código"
 
 #: editor/editor_settings.cpp
 msgid "Dim Editor On Dialog Popup"
@@ -5321,7 +5277,6 @@ msgid "Unfocused Low Processor Mode Sleep (µsec)"
 msgstr "Duração do Modo de Baixo Consumo do Processador Fora de Foco (µsec)"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Separate Distraction Mode"
 msgstr "Modo Livre de Distrações"
 
@@ -5412,9 +5367,8 @@ msgid "Safe Save On Backup Then Rename"
 msgstr "Salvar com Segurança no Backup e Renomear"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "File Dialog"
-msgstr "Diálogo XForm"
+msgstr "Arquivo de Diálogo"
 
 #: editor/editor_settings.cpp
 msgid "Thumbnail Size"
@@ -5425,37 +5379,32 @@ msgid "Docks"
 msgstr "Painéis"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Scene Tree"
-msgstr "Obter Árvore da Cena"
+msgstr "Grupo de Cenas"
 
 #: editor/editor_settings.cpp
 msgid "Start Create Dialog Fully Expanded"
 msgstr "Iniciar Diálogo de Criação Totalmente Expandido"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Always Show Folders"
-msgstr "Mostrar Grelha Sempre"
+msgstr "Sempre mostrar Pastas"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Property Editor"
-msgstr "Editor de Grupo"
+msgstr "Editor de propriedades"
 
 #: editor/editor_settings.cpp
 msgid "Auto Refresh Interval"
 msgstr "Intervalo de Atualização Automática"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Subresource Hue Tint"
-msgstr "Sub-recursos"
+msgstr "Sub-recursos Cor Hue"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Color Theme"
-msgstr "Editor de Tema"
+msgstr "Cor do Tema"
 
 #: editor/editor_settings.cpp scene/3d/label_3d.cpp
 #: scene/resources/default_theme/default_theme.cpp
@@ -5468,9 +5417,8 @@ msgid "Highlighting"
 msgstr "Destaque"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Syntax Highlighting"
-msgstr "Destaque de Sintaxe"
+msgstr "Destaque da Sintaxe"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
 msgid "Highlight All Occurrences"
@@ -5485,18 +5433,16 @@ msgid "Highlight Type Safe Lines"
 msgstr "Destacar Linhas com Tipo Seguro"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Indent"
-msgstr "Indentar à esquerda"
+msgstr "Indentar"
 
 #: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
 msgid "Auto Indent"
 msgstr "Indentação Automática"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Convert Indent On Save"
-msgstr "Converter Indentação em Espaços"
+msgstr "Converter Indentação ao Salvar"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
 msgid "Draw Tabs"
@@ -5522,9 +5468,8 @@ msgid "V Scroll Speed"
 msgstr "Velocidade de Rolagem V"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Minimap"
-msgstr "Mostrar Origem"
+msgstr "Mostrar Minimapa"
 
 #: editor/editor_settings.cpp
 msgid "Minimap Width"
@@ -5535,13 +5480,12 @@ msgid "Mouse Extra Buttons Navigate History"
 msgstr "Botões extra do Mouse para Navegar no Histórico"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Drag And Drop Selection"
-msgstr "Seleção de GridMap"
+msgstr "Arrastar e soltar"
 
 #: editor/editor_settings.cpp
 msgid "Stay In Script Editor On Node Selected"
-msgstr ""
+msgstr "Manter editor de script no Nodo selecionado"
 
 #: editor/editor_settings.cpp
 msgid "Appearance"
@@ -5560,9 +5504,8 @@ msgid "Show Bookmark Gutter"
 msgstr "Mostrar Barra de Favoritos"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Breakpoint Gutter"
-msgstr "Saltar Pontos de Paragem"
+msgstr "Mostrar Pontos de Parada"
 
 #: editor/editor_settings.cpp
 msgid "Show Info Gutter"
@@ -5589,23 +5532,20 @@ msgid "Line Length Guideline Hard Column"
 msgstr "Diretriz de Comprimento de Linha de Coluna Rígida"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
-#, fuzzy
 msgid "Script List"
-msgstr "Editor de Script"
+msgstr "Lista de Scripts"
 
 #: editor/editor_settings.cpp
 msgid "Show Members Overview"
 msgstr "Mostrar Visão Geral dos Membros"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
-#, fuzzy
 msgid "Files"
-msgstr "Ficheiro"
+msgstr "Arquivos"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Trim Trailing Whitespace On Save"
-msgstr "Apagar Espaços nos Limites"
+msgstr "Apagar Espaços nos Limites ao Salvar"
 
 #: editor/editor_settings.cpp
 msgid "Autosave Interval Secs"
@@ -5624,9 +5564,8 @@ msgid "Auto Reload Scripts On External Change"
 msgstr "Recarregamento Automático de Scripts em Caso de Mudança Externa"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Create Signal Callbacks"
-msgstr "Forçar Shader de Reserva"
+msgstr "Criar Sinais de Chamadas"
 
 #: editor/editor_settings.cpp
 msgid "Sort Members Outline Alphabetically"
@@ -7369,7 +7308,8 @@ msgid "8 Bit"
 msgstr "8 Bits"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Mono"
 
@@ -15402,18 +15342,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Tornar Local"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr "Outro nó já usa esse nome exclusivo na cena."
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nome do Nó:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Outro nó já usa esse nome exclusivo na cena."
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nome do Nó:"
 
 #: editor/scene_tree_dock.cpp
@@ -15615,6 +15556,11 @@ msgid "Button Group"
 msgstr "Grupo Botão"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nome do Nó:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(A Ligar de)"
 
@@ -15693,6 +15639,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Nome de nó inválido, os caracteres seguintes não são permitidos:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "Outro nó já usa esse nome exclusivo na cena."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Renomear Nó"
 
@@ -17563,6 +17513,21 @@ msgstr "Construir Solução"
 msgid "Auto Update Project"
 msgstr "Projeto sem nome"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Mostrar Tudo"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Escolha uma Diretoria"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Escolha uma Diretoria"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Fim do stack trace de exceção interna"
@@ -19412,6 +19377,11 @@ msgstr "CustomNode"
 msgid "Custom BG Color"
 msgstr "CustomNode"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Expandir Tudo"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20266,6 +20236,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Nome curto de pacote inválido."
 
@@ -28344,7 +28320,7 @@ msgstr "Modo de Interpolação"
 
 #: servers/visual_server.cpp
 msgid "Max Simultaneous Compiles"
-msgstr ""
+msgstr "Compilação simultânea Maxima"
 
 #: servers/visual_server.cpp
 msgid "Log Active Async Compiles Count"
diff --git a/editor/translations/pt_BR.po b/editor/translations/pt_BR.po
index 84a5ac45c3..4541da85ee 100644
--- a/editor/translations/pt_BR.po
+++ b/editor/translations/pt_BR.po
@@ -144,13 +144,20 @@
 # Ednaldo Pereira Confia <filat51823@storypo.com>, 2022.
 # Mauricio <mauricio.fidalgo1@gmail.com>, 2022.
 # Felipe Kinoshita <kinofhek@gmail.com>, 2022.
+# TLAliceDev <calicedev@protonmail.com>, 2022.
+# Mr.Albino <ricmorsoleto@gmail.com>, 2022.
+# Jaide Alonso Ambrosio <jaide.sp@gmail.com>, 2022.
+# Paulo Sergio Campos de Lima <cloverfieldor@gmail.com>, 2022.
+# Avery <jarreed0@gmail.com>, 2022.
+# TheJC <the-green-green.0rvdk@simplelogin.fr>, 2022.
+# Mauricio Mazur <mauricio.mazur12@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: 2016-05-30\n"
-"PO-Revision-Date: 2022-08-04 06:38+0000\n"
-"Last-Translator: Felipe Kinoshita <kinofhek@gmail.com>\n"
+"PO-Revision-Date: 2022-09-05 11:17+0000\n"
+"Last-Translator: TheJC <the-green-green.0rvdk@simplelogin.fr>\n"
 "Language-Team: Portuguese (Brazil) <https://hosted.weblate.org/projects/"
 "godot-engine/godot/pt_BR/>\n"
 "Language: pt_BR\n"
@@ -158,7 +165,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -363,7 +370,7 @@ msgstr "Página lida adiante"
 
 #: core/io/http_client.cpp
 msgid "Blocking Mode Enabled"
-msgstr "Modo de Bloqueio Ativado"
+msgstr "Modo de bloqueio Ativado"
 
 #: core/io/http_client.cpp
 msgid "Connection"
@@ -929,7 +936,7 @@ msgstr "Profilador"
 
 #: core/project_settings.cpp
 msgid "Max Functions"
-msgstr "Funções máximas"
+msgstr "Máximo de Funções"
 
 #: core/project_settings.cpp scene/3d/vehicle_body.cpp
 msgid "Compression"
@@ -1121,7 +1128,7 @@ msgstr "Máximo de luzes renderizáveis"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Max Renderable Reflections"
-msgstr "Máximo de Reflexões Renderizáveis"
+msgstr "Máximo de Reflexos renderizáveis"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Max Lights Per Object"
@@ -1668,7 +1675,7 @@ msgstr "Adicionar Trilha Bezier"
 
 #: editor/animation_track_editor.cpp
 msgid "Track path is invalid, so can't add a key."
-msgstr "Caminho da faixa é inválido, então não pode adicionar uma chave."
+msgstr "Caminho da trilha é inválido, então não pode adicionar uma chave."
 
 #: editor/animation_track_editor.cpp
 msgid "Track is not of type Spatial, can't insert key"
@@ -2868,9 +2875,8 @@ msgid "Project export for platform:"
 msgstr "Exportação do projeto para plataforma:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "Concluído com erros."
+msgstr "Concluído com avisos."
 
 #: editor/editor_export.cpp
 msgid "Completed successfully."
@@ -2992,7 +2998,7 @@ msgstr "64 Bits"
 
 #: editor/editor_export.cpp
 msgid "Embed PCK"
-msgstr "PCK Incorporado"
+msgstr "Embutir PCK"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
 msgid "Texture Format"
@@ -4598,6 +4604,7 @@ msgstr "Ferramentas diversas atuantes no projeto ou cena."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projeto"
 
@@ -5605,7 +5612,7 @@ msgstr "Seleção Arrasta e Solta"
 
 #: editor/editor_settings.cpp
 msgid "Stay In Script Editor On Node Selected"
-msgstr ""
+msgstr "Ficar no Editor de Script ao Selecionar Nó"
 
 #: editor/editor_settings.cpp
 msgid "Appearance"
@@ -5819,7 +5826,7 @@ msgstr "Junção"
 #: scene/resources/particles_material.cpp servers/physics_2d_server.cpp
 #: servers/physics_server.cpp
 msgid "Shape"
-msgstr "Form"
+msgstr "Forma"
 
 #: editor/editor_settings.cpp
 msgid "Primary Grid Steps"
@@ -7234,7 +7241,7 @@ msgstr "Importando Cena..."
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Generating Lightmaps"
-msgstr "Generando Lightmaps"
+msgstr "Gerando Lightmaps"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Generating for Mesh:"
@@ -7299,7 +7306,7 @@ msgstr "Modo HDR"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "BPTC LDR"
-msgstr ""
+msgstr "BPTC LDR"
 
 #: editor/import/resource_importer_texture.cpp
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/cpu_particles_2d.cpp
@@ -7318,7 +7325,7 @@ msgstr "Corrigir Alpha da Borda"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "Premult Alpha"
-msgstr ""
+msgstr "Pré-Multiplicar Alpha"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "Hdr As Srgb"
@@ -7378,7 +7385,8 @@ msgid "8 Bit"
 msgstr "8 Bits"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Mono"
 
@@ -11724,9 +11732,8 @@ msgid "New Animation"
 msgstr "Nova animação"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
-#, fuzzy
 msgid "Filter animations"
-msgstr "Filtrar métodos"
+msgstr "Filtrar animações"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Speed:"
@@ -12529,9 +12536,8 @@ msgid "Palette Min Width"
 msgstr "Largura Mínima de Paleta"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
-#, fuzzy
 msgid "Palette Item H Separation"
-msgstr "Separador Nomeado"
+msgstr "Separação Horizontal dos Itens de Paleta"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
 msgid "Show Tile Names"
@@ -12560,9 +12566,8 @@ msgid "Display Grid"
 msgstr "Mostrar Grid"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
-#, fuzzy
 msgid "Axis Color"
-msgstr "Escolher Cor"
+msgstr "Cor do Eixo"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Add Texture(s) to TileSet."
@@ -12606,7 +12611,7 @@ msgstr "Coordenada Anterior"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Select the previous shape, subtile, or Tile."
-msgstr "Selecione a forma, subtile ou tile anterior."
+msgstr "Selecione a forma anterior, subtile ou Tile."
 
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/sprite.cpp
 #: scene/3d/sprite_3d.cpp scene/resources/texture.cpp
@@ -12714,7 +12719,7 @@ msgstr "Ative o snap e mostre a grade (configurável através do Inspetor)."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Display Tile Names (Hold Alt Key)"
-msgstr "Exibir nomes de mosaico (segure a tecla Alt)"
+msgstr "Exibir nomes dos Tiles (segure a tecla Alt)"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid ""
@@ -12725,7 +12730,8 @@ msgstr ""
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Remove selected texture? This will remove all tiles which use it."
-msgstr "Remover Texture Selecionada e TODAS PEÇAS que a usam."
+msgstr ""
+"Remover textura selecionada? Todos os tiles que a usam serão removidos."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "You haven't selected a texture to remove."
@@ -12733,7 +12739,7 @@ msgstr "Você não selecionou uma textura para remover."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Create from scene? This will overwrite all current tiles."
-msgstr "Criar a partir de cena? Isso substituirá todos os blocos atuais."
+msgstr "Criar a partir de cena? Isso substituirá todos os tiles atuais."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Merge from scene?"
@@ -12753,7 +12759,7 @@ msgid ""
 "Click on another Tile to edit it."
 msgstr ""
 "Arraste alças para editar o Rect.\n"
-"Clique em outro Mosaico para editá-lo."
+"Clique em outro Tile para editá-lo."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Delete selected Rect."
@@ -12764,8 +12770,8 @@ msgid ""
 "Select current edited sub-tile.\n"
 "Click on another Tile to edit it."
 msgstr ""
-"Selecione o sub-bloco editado atual.\n"
-"Clique em outro Mosaico para editá-lo."
+"Selecione o sub-tile editado atual.\n"
+"Clique em outro Tile para editá-lo."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Delete polygon."
@@ -12781,7 +12787,7 @@ msgstr ""
 "LMB: Ligar bit.\n"
 "RMB: Desligar bit.\n"
 "Shift+LMB: Escolher bit curinga.\n"
-"Clique em outro Mosaico para editá-lo."
+"Clique em outro Tile para editá-lo."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid ""
@@ -12789,41 +12795,41 @@ msgid ""
 "bindings.\n"
 "Click on another Tile to edit it."
 msgstr ""
-"Selecione o sub-bloco para usar como ícone, isso também será usado em "
-"ligações inválidas do autotile.\n"
-"Clique em outro Mosaico para editá-lo."
+"Selecione o sub-tile para usar como ícone, ele também será usado em ligações "
+"inválidas do autotile.\n"
+"Clique em outro Tile para editá-lo."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid ""
 "Select sub-tile to change its priority.\n"
 "Click on another Tile to edit it."
 msgstr ""
-"Selecione o sub-bloco para alterar sua prioridade.\n"
-"Clique em outro Mosaico para editá-lo."
+"Selecione o sub-tile para alterar sua prioridade.\n"
+"Clique em outro Tile para editá-lo."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid ""
 "Select sub-tile to change its z index.\n"
 "Click on another Tile to edit it."
 msgstr ""
-"Selecione o sub-bloco para alterar seu índice z.\n"
-"Clique em outro Mosaico para editá-lo."
+"Selecione o sub-tile para alterar seu índice z.\n"
+"Clique em outro Tile para editá-lo."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Set Tile Region"
-msgstr "Definir a região do Mosaico"
+msgstr "Definir a região do Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Create Tile"
-msgstr "Criar Telha"
+msgstr "Criar Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Set Tile Icon"
-msgstr "Definir ícone de telha"
+msgstr "Definir Ícone do Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Edit Tile Bitmask"
-msgstr "Editar o Bitmask da telha"
+msgstr "Editar o Bitmask do Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Edit Collision Polygon"
@@ -12839,11 +12845,11 @@ msgstr "Editar polígono de navegação"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Paste Tile Bitmask"
-msgstr "Colar Máscara Bitmask"
+msgstr "Colar Bitmask de Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Clear Tile Bitmask"
-msgstr "Limpar o Bitmask da telha"
+msgstr "Limpar Bitmask do Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Make Polygon Concave"
@@ -12855,7 +12861,7 @@ msgstr "Tornar o Polígono Convexo"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Remove Tile"
-msgstr "Remover Telha"
+msgstr "Remover Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Remove Collision Polygon"
@@ -12871,11 +12877,11 @@ msgstr "Remover Polígono de Navegação"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Edit Tile Priority"
-msgstr "Editar prioridade da telha"
+msgstr "Editar Prioridade do Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Edit Tile Z Index"
-msgstr "Editar índice de telha Z"
+msgstr "Editar Índice Z do Tile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Make Convex"
@@ -12898,9 +12904,8 @@ msgid "This property can't be changed."
 msgstr "Esta propriedade não pode ser alterada."
 
 #: editor/plugins/tile_set_editor_plugin.cpp
-#, fuzzy
 msgid "Snap Options"
-msgstr "Opções de encaixe"
+msgstr "Opções de Encaixe"
 
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/animated_sprite.cpp
 #: scene/2d/camera_2d.cpp scene/2d/cpu_particles_2d.cpp scene/2d/light_2d.cpp
@@ -12941,9 +12946,8 @@ msgid "Texture"
 msgstr "Textura"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
-#, fuzzy
 msgid "Tex Offset"
-msgstr "Deslocamento do Byte"
+msgstr "Deslocamento da Textura"
 
 #: editor/plugins/tile_set_editor_plugin.cpp modules/csg/csg_shape.cpp
 #: scene/2d/canvas_item.cpp scene/2d/particles_2d.cpp
@@ -12953,31 +12957,28 @@ msgstr "Material"
 
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/canvas_item.cpp
 #: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp scene/resources/style_box.cpp
-#, fuzzy
 msgid "Modulate"
-msgstr "Popular"
+msgstr "Modular"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Tile Mode"
 msgstr "Modo de Tiles"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
-#, fuzzy
 msgid "Autotile Bitmask Mode"
-msgstr "Modo Bitmask"
+msgstr "Modo Bitmask do Autotile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Subtile Size"
-msgstr "Tamanho do Sub Título"
+msgstr "Tamanho do Subtile"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Subtile Spacing"
 msgstr "Espaçamento dos Subtiles"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
-#, fuzzy
 msgid "Occluder Offset"
-msgstr "Criar Polígono de Oclusão"
+msgstr "Deslocamento de Oclusor"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "Navigation Offset"
@@ -12996,9 +12997,8 @@ msgid "Selected Collision"
 msgstr "Colisão Selecionada"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
-#, fuzzy
 msgid "Selected Collision One Way"
-msgstr "Selecionar Apenas"
+msgstr "Colisão em sentido único selecionada"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 #, fuzzy
@@ -13019,7 +13019,7 @@ msgstr "Scripts do Tileset"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 msgid "TileSet"
-msgstr "Conjunto de Telha"
+msgstr "TileSet"
 
 #: editor/plugins/version_control_editor_plugin.cpp
 msgid "No VCS plugins are available."
@@ -13054,7 +13054,7 @@ msgstr "Commit:"
 
 #: editor/plugins/version_control_editor_plugin.cpp
 msgid "Date:"
-msgstr "Encontro:"
+msgstr "Data:"
 
 #: editor/plugins/version_control_editor_plugin.cpp
 msgid "Subtitle:"
@@ -13158,6 +13158,7 @@ msgid "Remove Remote"
 msgstr "Remover remoto"
 
 #: editor/plugins/version_control_editor_plugin.cpp
+#, fuzzy
 msgid "Remote Name"
 msgstr "Nome Remoto"
 
@@ -15373,19 +15374,20 @@ msgstr ""
 msgid "Make Local"
 msgstr "Tornar Local"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr "Outro nó já está usando este nome único na cena atual."
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
+msgstr "Habilitar Nome Único de Cena"
 
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
-msgstr "Nome Único"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Outro nó já está usando este nome único na cena atual."
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
-msgstr "Nome Único"
+msgid "Disable Scene Unique Name(s)"
+msgstr "Desabilitar Nome Único de Cena"
 
 #: editor/scene_tree_dock.cpp
 msgid "New Scene Root"
@@ -15586,6 +15588,10 @@ msgid "Button Group"
 msgstr "Grupo de Botões"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "Desabilitar Nome Único de Cena"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Conectando de)"
 
@@ -15664,6 +15670,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Nome de nó inválido, os seguintes caracteres não são permitidos:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "Outro nó já está usando este nome único na cena atual."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Renomear Nó"
 
@@ -15888,9 +15898,8 @@ msgid "Stack Frames"
 msgstr "Pilha de Quadros"
 
 #: editor/script_editor_debugger.cpp
-#, fuzzy
 msgid "Filter stack variables"
-msgstr "Filtros do tile"
+msgstr "Filtrar variáveis stack"
 
 #: editor/script_editor_debugger.cpp
 msgid "Auto Switch To Remote Scene Tree"
@@ -16033,23 +16042,20 @@ msgid "Change Particles AABB"
 msgstr "Alterar o AABB das Partículas"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Reflection Probe"
-msgstr "Selecionar Propriedade"
+msgstr "Sonda de Reflexão"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Change Probe Extents"
 msgstr "Alterar a Extensão da Sonda"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "GI Probe"
-msgstr "Cozinhar Sonda GI"
+msgstr "Sonda GI"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Baked Indirect Light"
-msgstr "Iluminação indireta"
+msgstr "Pré-Processar Iluminação indireta"
 
 #: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
 msgid "Change Sphere Shape Radius"
@@ -16084,9 +16090,8 @@ msgid "Navigation Edge"
 msgstr "Bordas de Navegação"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Navigation Edge Disabled"
-msgstr "Modo Navegação"
+msgstr "Bordas de Navegação Desativadas"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Navigation Solid"
@@ -16117,9 +16122,8 @@ msgid "Set Room Point Position"
 msgstr "Definir Posição Do Ponto Da Sala"
 
 #: editor/spatial_editor_gizmos.cpp scene/3d/portal.cpp
-#, fuzzy
 msgid "Portal Margin"
-msgstr "Definir Margem"
+msgstr "Margem do Portal"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Edge"
@@ -16138,15 +16142,13 @@ msgid "Portal Front"
 msgstr "Frente do Portal"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Portal Back"
-msgstr "Voltar"
+msgstr "Voltar ao Portal"
 
 #: editor/spatial_editor_gizmos.cpp scene/2d/light_occluder_2d.cpp
 #: scene/2d/tile_map.cpp
-#, fuzzy
 msgid "Occluder"
-msgstr "Modo Oclusão"
+msgstr "Oclusor"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Set Occluder Sphere Radius"
@@ -16159,27 +16161,25 @@ msgstr "Definir Posição Da Esfera Do Oclusor"
 #: editor/spatial_editor_gizmos.cpp
 #, fuzzy
 msgid "Set Occluder Polygon Point Position"
-msgstr "Definir Posição Do Ponto Do Portal"
+msgstr "Definir Posição do Ponto do Polígono Oclusor"
 
 #: editor/spatial_editor_gizmos.cpp
 #, fuzzy
 msgid "Set Occluder Hole Point Position"
-msgstr "Definir Posição do Ponto da Curva"
+msgstr "Definir Posição do Ponto do Buraco Oclusor"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Occluder Polygon Front"
-msgstr "Criar Polígono de Oclusão"
+msgstr "Frente do Polígono Oclusor"
 
 #: editor/spatial_editor_gizmos.cpp
 #, fuzzy
 msgid "Occluder Polygon Back"
-msgstr "Criar Polígono de Oclusão"
+msgstr "Costas do Polígono Oclusor"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Occluder Hole"
-msgstr "Criar Polígono de Oclusão"
+msgstr "Buraco Oclusor"
 
 #: main/main.cpp
 msgid "Godot Physics"
@@ -16192,19 +16192,16 @@ msgstr "Usar BVH"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_sw.cpp
 #: servers/visual/visual_server_scene.cpp
-#, fuzzy
 msgid "BVH Collision Margin"
-msgstr "Modo Colisão"
+msgstr "Margem de Colisão BVH"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Crash Handler"
-msgstr "Definir Manipulador"
+msgstr "Gerenciador de Falhas"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Multithreaded Server"
-msgstr "Conjunto de MultiNode"
+msgstr "Servidor com Multi-Thread"
 
 #: main/main.cpp
 msgid "RID Pool Prealloc"
@@ -16243,14 +16240,12 @@ msgid "File Logging"
 msgstr "Registrando Log de Arquivos"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Enable File Logging"
-msgstr "Habilitar Filtragem"
+msgstr "Habilitar Log de Arquivos"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Log Path"
-msgstr "Copiar Caminho"
+msgstr "Caminho de Log"
 
 #: main/main.cpp
 msgid "Max Log Files"
@@ -16301,9 +16296,8 @@ msgid "Intended Usage"
 msgstr "Intenção de Uso"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Framebuffer Allocation"
-msgstr "Seleção de Frame"
+msgstr "Alocação de Framebuffer"
 
 #: main/main.cpp platform/uwp/os_uwp.cpp
 msgid "Energy Saving"
@@ -16314,9 +16308,8 @@ msgid "Threads"
 msgstr "Threads"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_wrap_mt.h
-#, fuzzy
 msgid "Thread Model"
-msgstr "Alternar Modo"
+msgstr "Modelo de Thread"
 
 #: main/main.cpp
 msgid "Thread Safe BVH"
@@ -16337,9 +16330,8 @@ msgid "Common"
 msgstr "Comum"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Physics FPS"
-msgstr "Frame de Física %"
+msgstr "FPS da Fisíca"
 
 #: main/main.cpp
 msgid "Force FPS"
@@ -16347,7 +16339,7 @@ msgstr "Forçar FPS"
 
 #: main/main.cpp
 msgid "Enable Pause Aware Picking"
-msgstr "Habilitar Escolha que é Ciente à Pausas"
+msgstr "Habilitar Seleção Ciente a Pausas"
 
 #: main/main.cpp scene/gui/item_list.cpp scene/gui/popup_menu.cpp
 #: scene/gui/scroll_container.cpp scene/gui/text_edit.cpp scene/gui/tree.cpp
@@ -16372,9 +16364,8 @@ msgid "Verbose stdout"
 msgstr "stdout Verboso"
 
 #: main/main.cpp scene/main/scene_tree.cpp scene/resources/multimesh.cpp
-#, fuzzy
 msgid "Physics Interpolation"
-msgstr "Modo de Interpolação"
+msgstr "Interpolação da Física"
 
 #: main/main.cpp
 msgid "Enable Warnings"
@@ -16402,14 +16393,12 @@ msgid "Hide Home Indicator"
 msgstr "Esconder Indicador de Home"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Input Devices"
-msgstr "Todos os dispositivos"
+msgstr "Dispositivos de Entrada"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Pointing"
-msgstr "Ponto"
+msgstr "Apontando"
 
 #: main/main.cpp
 msgid "Touch Delay"
@@ -16424,9 +16413,8 @@ msgid "Shaders"
 msgstr "Shaders"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Debug Shader Fallbacks"
-msgstr "Forçar Fallbacks do Shader"
+msgstr "Depurar Fallbacks do Shader"
 
 #: main/main.cpp scene/3d/baked_lightmap.cpp scene/3d/camera.cpp
 #: scene/3d/world_environment.cpp scene/main/scene_tree.cpp
@@ -16436,7 +16424,7 @@ msgstr "Ambiente"
 
 #: main/main.cpp
 msgid "Default Clear Color"
-msgstr "Cor de Limpeza Padrão"
+msgstr "Cor Limpa Padrão"
 
 #: main/main.cpp
 msgid "Boot Splash"
@@ -16459,9 +16447,8 @@ msgid "Use Filter"
 msgstr "Usar Filtro"
 
 #: main/main.cpp scene/resources/style_box.cpp
-#, fuzzy
 msgid "BG Color"
-msgstr "Cores"
+msgstr "Cor do Plano de Fundo"
 
 #: main/main.cpp
 msgid "macOS Native Icon"
@@ -16473,7 +16460,7 @@ msgstr "Ícone Windows Nativo"
 
 #: main/main.cpp
 msgid "Buffering"
-msgstr ""
+msgstr "Buffering"
 
 #: main/main.cpp
 msgid "Agile Event Flushing"
@@ -16504,9 +16491,8 @@ msgid "Tooltip Position Offset"
 msgstr "Deslocamento de Posição da Dica de Ferramenta"
 
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
-#, fuzzy
 msgid "Debugger Agent"
-msgstr "Depurador"
+msgstr "Agente Depurador"
 
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
 msgid "Wait For Debugger"
@@ -16525,9 +16511,8 @@ msgid "Unhandled Exception Policy"
 msgstr "Politica de Tratamento Exceções"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Main Loop Type"
-msgstr "Localizar Tipo de Nó"
+msgstr "Tipo de Loop Principal"
 
 #: main/main.cpp scene/gui/texture_progress.cpp
 #: scene/gui/viewport_container.cpp
@@ -16549,7 +16534,7 @@ msgstr "Aceitar Sair Automaticamente"
 #: main/main.cpp scene/main/scene_tree.cpp
 #, fuzzy
 msgid "Quit On Go Back"
-msgstr "Voltar"
+msgstr "Sair em Voltar"
 
 #: main/main.cpp scene/main/viewport.cpp
 #, fuzzy
@@ -16570,7 +16555,7 @@ msgstr "Ativar Mundo Macio"
 
 #: modules/csg/csg_gizmos.cpp
 msgid "CSG"
-msgstr ""
+msgstr "CSG"
 
 #: modules/csg/csg_gizmos.cpp
 msgid "Change Cylinder Radius"
@@ -16638,23 +16623,20 @@ msgid "Smooth Faces"
 msgstr "Suavizar Faces"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Sides"
-msgstr "Mostrar Guias"
+msgstr "Lados"
 
 #: modules/csg/csg_shape.cpp
 msgid "Cone"
 msgstr "Cone"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Inner Radius"
-msgstr "Alterar Raio Interno do Toro"
+msgstr "Raio Interno"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Outer Radius"
-msgstr "Alterar Raio Externo do Toro"
+msgstr "Raio Externo"
 
 #: modules/csg/csg_shape.cpp
 msgid "Ring Sides"
@@ -16763,9 +16745,8 @@ msgstr "Carregar Apenas uma Vez"
 
 #: modules/gdnative/gdnative.cpp
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Singleton"
-msgstr "Esqueleto"
+msgstr "Singleton"
 
 #: modules/gdnative/gdnative.cpp
 msgid "Symbol Prefix"
@@ -16855,9 +16836,8 @@ msgid "Function Definition Color"
 msgstr "Cor de Definição de Função"
 
 #: modules/gdscript/editor/gdscript_highlighter.cpp
-#, fuzzy
 msgid "Node Path Color"
-msgstr "Copiar Caminho do Nó"
+msgstr "Cor do Caminho do Nó"
 
 #: modules/gdscript/gdscript.cpp modules/visual_script/visual_script.cpp
 msgid "Max Call Stack"
@@ -16918,9 +16898,8 @@ msgid "Language Server"
 msgstr "Servidor de Idioma"
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
-#, fuzzy
 msgid "Enable Smart Resolve"
-msgstr "Não foi possível resolver"
+msgstr "Habilitar Resolução Inteligente"
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
 msgid "Show Native Symbols In Editor"
@@ -16952,9 +16931,8 @@ msgid "Component Type"
 msgstr "Tipo do Componente"
 
 #: modules/gltf/gltf_accessor.cpp
-#, fuzzy
 msgid "Normalized"
-msgstr "Formato"
+msgstr "Normalizado"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Count"
@@ -17046,11 +17024,11 @@ msgstr "Intervalo"
 
 #: modules/gltf/gltf_light.cpp
 msgid "Inner Cone Angle"
-msgstr ""
+msgstr "Ângulo interno do cone"
 
 #: modules/gltf/gltf_light.cpp
 msgid "Outer Cone Angle"
-msgstr ""
+msgstr "Ângulo externo do cone"
 
 #: modules/gltf/gltf_mesh.cpp
 #, fuzzy
@@ -17062,9 +17040,8 @@ msgid "Instance Materials"
 msgstr "Materiais da Instância"
 
 #: modules/gltf/gltf_node.cpp scene/3d/skeleton.cpp
-#, fuzzy
 msgid "Parent"
-msgstr "Reparentar"
+msgstr "Pai"
 
 #: modules/gltf/gltf_node.cpp
 #, fuzzy
@@ -17100,9 +17077,8 @@ msgid "Godot Bone Node"
 msgstr "Nó de Osso Godot"
 
 #: modules/gltf/gltf_skin.cpp
-#, fuzzy
 msgid "Skin Root"
-msgstr "Nova Raiz de Cena"
+msgstr "Raiz da Skin"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Joints Original"
@@ -17119,11 +17095,11 @@ msgstr "Mover Junta"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Joint I To Bone I"
-msgstr ""
+msgstr "Junta I ao Osso I"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Joint I To Name"
-msgstr ""
+msgstr "Junta I ao Nome"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Godot Skin"
@@ -17131,15 +17107,15 @@ msgstr ""
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Diffuse Img"
-msgstr ""
+msgstr "Difusa Img"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Diffuse Factor"
-msgstr ""
+msgstr "Difusa Fator"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Gloss Factor"
-msgstr ""
+msgstr "Fator de Brilho"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Specular Factor"
@@ -17178,7 +17154,7 @@ msgstr "Visão Traseira"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Accessors"
-msgstr ""
+msgstr "Assessores"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Scene Name"
@@ -17231,9 +17207,8 @@ msgid "Mesh Library"
 msgstr "Biblioteca de Malhas"
 
 #: modules/gridmap/grid_map.cpp
-#, fuzzy
 msgid "Physics Material"
-msgstr "Frame de Física %"
+msgstr "Material de Física"
 
 #: modules/gridmap/grid_map.cpp scene/3d/visual_instance.cpp
 #, fuzzy
@@ -17268,9 +17243,8 @@ msgid "Mask"
 msgstr "Máscara"
 
 #: modules/gridmap/grid_map.cpp scene/2d/tile_map.cpp
-#, fuzzy
 msgid "Bake Navigation"
-msgstr "Navegação"
+msgstr "Navegação Pré-Processada"
 
 #: modules/gridmap/grid_map.cpp scene/2d/navigation_2d.cpp
 #: scene/2d/navigation_agent_2d.cpp scene/2d/navigation_polygon.cpp
@@ -17436,25 +17410,24 @@ msgid "Plotting lightmaps"
 msgstr "Traçando mapas de luz"
 
 #: modules/lightmapper_cpu/register_types.cpp
-#, fuzzy
 msgid "CPU Lightmapper"
-msgstr "Faça mapas de luz"
+msgstr "Mapeamento de Luz da CPU"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Low Quality Ray Count"
-msgstr ""
+msgstr "Quantidade de Raios de Baixa Qualidade"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Medium Quality Ray Count"
-msgstr ""
+msgstr "Quantidade de Raios de Qualidade Média"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "High Quality Ray Count"
-msgstr ""
+msgstr "Quantidade de Raios de Qualidade Alta"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Ultra Quality Ray Count"
-msgstr ""
+msgstr "Quantidade de Raios de Qualidade Ultra"
 
 #: modules/minimp3/audio_stream_mp3.cpp
 #: modules/minimp3/resource_importer_mp3.cpp
@@ -17465,16 +17438,15 @@ msgstr "Deslocamento do Loop"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "Eye Height"
-msgstr ""
+msgstr "Altura do Olho"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "IOD"
 msgstr ""
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
-#, fuzzy
 msgid "Display Width"
-msgstr "Exibição Wireframe"
+msgstr "Largura de Tela"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 #, fuzzy
@@ -17502,9 +17474,23 @@ msgid "Build Solution"
 msgstr "Construir Solução"
 
 #: modules/mono/editor/csharp_project.cpp
-#, fuzzy
 msgid "Auto Update Project"
-msgstr "Projeto Sem Nome"
+msgstr "Atualizar Projeto Automaticamente"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Nome de Exibição"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Escolha um Diretório"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Escolha um Diretório"
 
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
@@ -17591,7 +17577,7 @@ msgstr ""
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "Noise"
-msgstr ""
+msgstr "Ruído"
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "Noise Offset"
@@ -17603,25 +17589,23 @@ msgstr "Oitavas"
 
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Period"
-msgstr ""
+msgstr "Período"
 
 #: modules/opensimplex/open_simplex_noise.cpp
-#, fuzzy
 msgid "Persistence"
-msgstr "Perspectiva"
+msgstr "Persistência"
 
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Lacunarity"
-msgstr ""
+msgstr "Lacunaridade"
 
 #: modules/regex/regex.cpp
 msgid "Subject"
 msgstr "Sujeito"
 
 #: modules/regex/regex.cpp
-#, fuzzy
 msgid "Names"
-msgstr "Nome"
+msgstr "Nomes"
 
 #: modules/regex/regex.cpp
 msgid "Strings"
@@ -17633,11 +17617,11 @@ msgstr ""
 
 #: modules/upnp/upnp.cpp
 msgid "Discover Local Port"
-msgstr ""
+msgstr "Descobrir Porta Local"
 
 #: modules/upnp/upnp.cpp
 msgid "Discover IPv6"
-msgstr ""
+msgstr "Descobrir IPv6"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
@@ -17645,27 +17629,24 @@ msgid "Description URL"
 msgstr "Descrição"
 
 #: modules/upnp/upnp_device.cpp
-#, fuzzy
 msgid "Service Type"
-msgstr "Definir o Tipo da Variável"
+msgstr "Tipo de Serviço"
 
 #: modules/upnp/upnp_device.cpp
 msgid "IGD Control URL"
-msgstr ""
+msgstr "URL de Controle IGD"
 
 #: modules/upnp/upnp_device.cpp
-#, fuzzy
 msgid "IGD Service Type"
-msgstr "Definir o Tipo da Variável"
+msgstr "Tipo de Serviço IGD"
 
 #: modules/upnp/upnp_device.cpp
 msgid "IGD Our Addr"
 msgstr ""
 
 #: modules/upnp/upnp_device.cpp
-#, fuzzy
 msgid "IGD Status"
-msgstr "Estado"
+msgstr "Estado do IGD"
 
 #: modules/visual_script/visual_script.cpp
 msgid ""
@@ -17704,9 +17685,8 @@ msgid "Stack overflow with stack depth:"
 msgstr "Sobrecarga da pilha com profundidade:"
 
 #: modules/visual_script/visual_script.cpp
-#, fuzzy
 msgid "Visual Script"
-msgstr "Buscar VisualScript"
+msgstr "Script Visual"
 
 #: modules/visual_script/visual_script_editor.cpp
 msgid "Change Signal Arguments"
@@ -18041,9 +18021,8 @@ msgid "Return Enabled"
 msgstr "Executável"
 
 #: modules/visual_script/visual_script_flow_control.cpp
-#, fuzzy
 msgid "Return Type"
-msgstr "Retornar"
+msgstr "Tipo de Retorno"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 #: scene/resources/visual_shader_nodes.cpp
@@ -18084,17 +18063,15 @@ msgstr "Iterador tornou-se inválido:"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Sequence"
-msgstr "Seqüência"
+msgstr "Sequência"
 
 #: modules/visual_script/visual_script_flow_control.cpp
-#, fuzzy
 msgid "in order:"
-msgstr "Renomear pasta:"
+msgstr "em ordem:"
 
 #: modules/visual_script/visual_script_flow_control.cpp
-#, fuzzy
 msgid "Steps"
-msgstr "Passo"
+msgstr "Passos"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Switch"
@@ -18110,17 +18087,16 @@ msgstr "Tipo de Projeção"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Is %s?"
-msgstr ""
+msgstr "É %s?"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Base Script"
-msgstr "Novo Script"
+msgstr "Script Base"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "On %s"
-msgstr ""
+msgstr "Em %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
@@ -18129,59 +18105,53 @@ msgstr "Self"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_yield_nodes.cpp
-#, fuzzy
 msgid "Call Mode"
-msgstr "Modo de Escalonamento"
+msgstr "Modo de Chamada"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Basic Type"
-msgstr "Mudar Tipo Base"
+msgstr "Tipo Base"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_nodes.cpp
 #: modules/visual_script/visual_script_yield_nodes.cpp
-#, fuzzy
 msgid "Node Path"
-msgstr "Copiar Caminho do Nó"
+msgstr "Caminho do Nó"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Use Default Args"
-msgstr "Redefinir para o padrão"
+msgstr "Usar Argumentos Padrão"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "Validate"
 msgstr "Validar"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "RPC Call Mode"
-msgstr "Modo de Escalonamento"
+msgstr "Modo de Chamada RPC"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Subtract %s"
-msgstr "Para caractere %s"
+msgstr "Subtrair %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "Multiply %s"
-msgstr ""
+msgstr "Multiplicar %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "Divide %s"
-msgstr ""
+msgstr "Dividir %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
 msgid "Mod %s"
-msgstr "Adicionar %s"
+msgstr "Mod %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
 msgid "ShiftLeft %s"
-msgstr "Conjunto %s"
+msgstr "ShiftLeft %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "ShiftRight %s"
@@ -18190,7 +18160,7 @@ msgstr ""
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
 msgid "BitAnd %s"
-msgstr "Adicionar %s"
+msgstr "BitAnd %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "BitOr %s"
@@ -18208,7 +18178,7 @@ msgstr "Modo de Seleção"
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
 msgid "Assign Op"
-msgstr "Atribuir"
+msgstr "Atribuir Op"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_nodes.cpp
@@ -18225,23 +18195,20 @@ msgid "Base object is not a Node!"
 msgstr "Objeto base não é um Nó!"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Path does not lead to Node!"
-msgstr "Caminho não leva a um Nó!"
+msgstr "Caminho não leva ao Nó!"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "Invalid index property name '%s' in node %s."
 msgstr "Nome de propriedade '%s' inválido no nó %s."
 
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Emit %s"
-msgstr "Conjunto %s"
+msgstr "Emitir %s"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Compose Array"
-msgstr "Redimensionar Vetor"
+msgstr "Compôr Vetor"
 
 #: modules/visual_script/visual_script_nodes.cpp scene/resources/material.cpp
 #: scene/resources/visual_shader_nodes.cpp
@@ -18261,9 +18228,8 @@ msgid "a if cond, else b"
 msgstr ""
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Var Name"
-msgstr "Nome"
+msgstr "Nome da Variável"
 
 #: modules/visual_script/visual_script_nodes.cpp
 msgid "VariableGet not found in script:"
@@ -18274,64 +18240,53 @@ msgid "VariableSet not found in script:"
 msgstr "VariableSet não encontrado no script:"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Preload"
-msgstr "Recarregar"
+msgstr "Pré Carregar"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Get Index"
-msgstr "Índice Z"
+msgstr "Obter Índice"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Set Index"
-msgstr "Índice Z"
+msgstr "Definir Índice"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Global Constant"
-msgstr "Constante"
+msgstr "Constante Global"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Class Constant"
-msgstr "Constante"
+msgstr "Classe Constante"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Basic Constant"
-msgstr "Constante"
+msgstr "Constante Básica"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Math Constant"
-msgstr "Constante"
+msgstr "Constante Matemática"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Get Engine Singleton"
-msgstr "Singleton GDNative ativado"
+msgstr "Obter Singleton da Engine"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Get Scene Node"
-msgstr "Nó TimeSeek"
+msgstr "Obter Nó da Cena"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Get Scene Tree"
-msgstr "Edição da Árvore de Cena"
+msgstr "Obter Árvore de Cenas"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Get Self"
-msgstr "Self"
+msgstr "Obter Sí Mesmo"
 
 #: modules/visual_script/visual_script_nodes.cpp
 #, fuzzy
 msgid "CustomNode"
-msgstr "Recortar Nós"
+msgstr "CustomNode"
 
 #: modules/visual_script/visual_script_nodes.cpp
 msgid "Custom node has no _step() method, can't process graph."
@@ -18350,35 +18305,31 @@ msgstr ""
 #: modules/visual_script/visual_script_nodes.cpp
 #, fuzzy
 msgid "SubCall"
-msgstr "Chamadas"
+msgstr "SubCall"
 
 #: modules/visual_script/visual_script_nodes.cpp scene/gui/graph_node.cpp
 msgid "Title"
 msgstr "Título"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Construct %s"
-msgstr "Constantes"
+msgstr "Construir %s"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Get Local Var"
-msgstr "Usar Espaço Local"
+msgstr "Obter Variável Local"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Set Local Var"
-msgstr "Usar Espaço Local"
+msgstr "Definir Variável Local"
 
 #: modules/visual_script/visual_script_nodes.cpp
-#, fuzzy
 msgid "Action %s"
-msgstr "Ação"
+msgstr "Ação %s"
 
 #: modules/visual_script/visual_script_nodes.cpp
 msgid "Deconstruct %s"
-msgstr ""
+msgstr "Desconstruir %s"
 
 #: modules/visual_script/visual_script_property_selector.cpp
 msgid "Search VisualScript"
@@ -18386,45 +18337,42 @@ msgstr "Buscar VisualScript"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "Yield"
-msgstr ""
+msgstr "Yield"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "Wait"
 msgstr "Esperar"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
-#, fuzzy
 msgid "Next Frame"
-msgstr "Mover Quadro"
+msgstr "Próximo Quadro"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
-#, fuzzy
 msgid "Next Physics Frame"
-msgstr "Frame de Física %"
+msgstr "Próximo Quadro de Física"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "%s sec(s)"
-msgstr ""
+msgstr "%s s"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp scene/main/timer.cpp
-#, fuzzy
 msgid "Wait Time"
-msgstr "Pintar Tile"
+msgstr "Tempo de Espera"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 #, fuzzy
 msgid "WaitSignal"
-msgstr "Sinal"
+msgstr "WaitSignal"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 #, fuzzy
 msgid "WaitNodeSignal"
-msgstr "Sinal"
+msgstr "WaitNodeSignal"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 #, fuzzy
 msgid "WaitInstanceSignal"
-msgstr "Instância"
+msgstr "WaitInstanceSignal"
 
 #: modules/webrtc/webrtc_data_channel.cpp
 #, fuzzy
@@ -18442,57 +18390,51 @@ msgstr "Tamanho do buffer do índice do polígono da tela (KB)"
 
 #: modules/websocket/websocket_client.cpp
 msgid "Verify SSL"
-msgstr ""
+msgstr "Verificar SSL"
 
 #: modules/websocket/websocket_client.cpp
 msgid "Trusted SSL Certificate"
-msgstr ""
+msgstr "Certificados SSL Confiáveis"
 
 #: modules/websocket/websocket_macros.h
-#, fuzzy
 msgid "WebSocket Client"
-msgstr "Perfis de rede"
+msgstr "Cliente WebSocket"
 
 #: modules/websocket/websocket_macros.h
-#, fuzzy
 msgid "Max In Buffer (KB)"
-msgstr "Tamanho Máximo (KB)"
+msgstr "Buffer de Entrada Máximo (KB)"
 
 #: modules/websocket/websocket_macros.h
 msgid "Max In Packets"
-msgstr ""
+msgstr "Máximo de Pacotes de Entrada"
 
 #: modules/websocket/websocket_macros.h
-#, fuzzy
 msgid "Max Out Buffer (KB)"
-msgstr "Tamanho Máximo (KB)"
+msgstr "Buffer de Saída Máximo (KB)"
 
 #: modules/websocket/websocket_macros.h
 msgid "Max Out Packets"
-msgstr ""
+msgstr "Máximo de Pacotes de Saída"
 
 #: modules/websocket/websocket_macros.h
-#, fuzzy
 msgid "WebSocket Server"
-msgstr "Perfis de rede"
+msgstr "Servidor WebSocket"
 
 #: modules/websocket/websocket_server.cpp
 msgid "Bind IP"
 msgstr ""
 
 #: modules/websocket/websocket_server.cpp
-#, fuzzy
 msgid "Private Key"
-msgstr "Caminho da chave privada SSH"
+msgstr "Chave Privada"
 
 #: modules/websocket/websocket_server.cpp platform/javascript/export/export.cpp
 msgid "SSL Certificate"
-msgstr ""
+msgstr "Certificado SSL"
 
 #: modules/websocket/websocket_server.cpp
-#, fuzzy
 msgid "CA Chain"
-msgstr "Limpar Cadeia de IK"
+msgstr "Cadeia CA"
 
 #: modules/websocket/websocket_server.cpp
 msgid "Handshake Timeout"
@@ -18520,9 +18462,8 @@ msgid "Reference Space Type"
 msgstr ""
 
 #: modules/webxr/webxr_interface.cpp
-#, fuzzy
 msgid "Visibility State"
-msgstr "Alternar Visibilidade"
+msgstr "Estado de Visibilidade"
 
 #: modules/webxr/webxr_interface.cpp
 #, fuzzy
@@ -18536,7 +18477,7 @@ msgstr "Encaixe inteligente"
 
 #: platform/android/export/export.cpp
 msgid "Android SDK Path"
-msgstr ""
+msgstr "Caminho para SDK Android"
 
 #: platform/android/export/export.cpp
 #, fuzzy
@@ -18557,23 +18498,23 @@ msgstr ""
 
 #: platform/android/export/export.cpp
 msgid "Shutdown ADB On Exit"
-msgstr ""
+msgstr "Desligar ADB Quando Sair"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Launcher Icons"
-msgstr ""
+msgstr "Ícones do Iniciador"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Main 192 X 192"
-msgstr ""
+msgstr "Principal 192 X 192"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Adaptive Foreground 432 X 432"
-msgstr ""
+msgstr "Primeiro Plano Adaptável 432 X 432"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Adaptive Background 432 X 432"
-msgstr ""
+msgstr "Fundo Adaptável 432 X 432"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Package name is missing."
@@ -18613,23 +18554,20 @@ msgid "Use Custom Build"
 msgstr "Usar Diretório de Usuário Personalizado"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Export Format"
-msgstr "Caminho de Exportação"
+msgstr "Exportar Formato"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Min SDK"
 msgstr "SDK Mínimo"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Target SDK"
-msgstr "FPS alvo"
+msgstr "SDK Alvo"
 
 #: platform/android/export/export_plugin.cpp platform/iphone/export/export.cpp
-#, fuzzy
 msgid "Architectures"
-msgstr "Arquitetura"
+msgstr "Arquiteturas"
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -18658,30 +18596,27 @@ msgstr "Senha"
 
 #: platform/android/export/export_plugin.cpp
 msgid "One Click Deploy"
-msgstr ""
+msgstr "Um Clique Implantar"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Clear Previous Install"
-msgstr "Inspecionar a Instância Anterior"
+msgstr "Limpar Instalação Anterior"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Code"
 msgstr "Código"
 
 #: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Package"
-msgstr "Empacotando"
+msgstr "Pacote"
 
 #: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
 msgid "Unique Name"
 msgstr "Nome Único"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Signed"
-msgstr "Sinal"
+msgstr "Assinado"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Classify As Game"
@@ -18689,12 +18624,11 @@ msgstr "Classificar como Jogo"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Retain Data On Uninstall"
-msgstr ""
+msgstr "Manter Dados ao Desinstalar"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Exclude From Recents"
-msgstr "Excluir Nós"
+msgstr "Excluir de Recentes"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Graphics"
@@ -18706,14 +18640,12 @@ msgid "OpenGL Debug"
 msgstr "Abrir"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "XR Features"
-msgstr "Funcionalidades"
+msgstr "Funcionalidades XR"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "XR Mode"
-msgstr "Modo Panorâmico"
+msgstr "Modo XR"
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -18722,16 +18654,15 @@ msgstr "Empacotando"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Hand Tracking Frequency"
-msgstr ""
+msgstr "Frequência de Rastreamento de Mão"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Passthrough"
-msgstr ""
+msgstr "Atravessar"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Immersive Mode"
-msgstr "Modo Prioridade"
+msgstr "Modo Imersivo"
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -18754,18 +18685,16 @@ msgid "Support Xlarge"
 msgstr "Suporte"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "User Data Backup"
-msgstr "Interface de Usuário"
+msgstr "Backup de Dados do Usuário"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Allow"
 msgstr "Permitir"
 
 #: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Command Line"
-msgstr "Command"
+msgstr "Linha de Comando"
 
 #: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
 msgid "Extra Args"
@@ -18781,19 +18710,16 @@ msgid "Salt"
 msgstr "Sal"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Public Key"
-msgstr "Caminho da chave pública SSH"
+msgstr "Chave Pública"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Permissions"
-msgstr "Máscara de Emissão"
+msgstr "Permissões"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Custom Permissions"
-msgstr "Rodar Outra Cena"
+msgstr "Permissões Personalizadas"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Select device from the list"
@@ -18912,6 +18838,11 @@ msgid ""
 "Note that the singleton was also renamed from \"GodotPayments\" to "
 "\"GodotGooglePlayBilling\"."
 msgstr ""
+"Módulo \"GodotPaymentV3\" inválido incluído na configuração do projeto "
+"\"android/modules\" (alterado no Godot 3.2.2).\n"
+"Substitua-o pelo plug-in \"GodotGooglePlayBilling\" original.\n"
+"Observe que o singleton também foi renomeado de \"GodotPayments\" para "
+"\"GodotGooglePlayBilling\"."
 
 #: platform/android/export/export_plugin.cpp
 msgid "\"Use Custom Build\" must be enabled to use the plugins."
@@ -18950,12 +18881,16 @@ msgstr ""
 #: platform/android/export/export_plugin.cpp
 msgid "\"Min SDK\" should be a valid integer, but got \"%s\" which is invalid."
 msgstr ""
+"\"Min SDK\" deve ser um número inteiro válido, mas obteve \"%s\" que é "
+"inválido."
 
 #: platform/android/export/export_plugin.cpp
 msgid ""
 "\"Min SDK\" cannot be lower than %d, which is the version needed by the "
 "Godot library."
 msgstr ""
+"\"Min SDK\" não pode ser inferior a %d, que é a versão necessária para a "
+"biblioteca Godot."
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -18969,12 +18904,16 @@ msgstr ""
 msgid ""
 "\"Target SDK\" should be a valid integer, but got \"%s\" which is invalid."
 msgstr ""
+"\"Target SDK\" deve ser um número inteiro válido, mas obteve \"%s\", que é "
+"inválido."
 
 #: platform/android/export/export_plugin.cpp
 msgid ""
 "\"Target SDK\" %d is higher than the default version %d. This may work, but "
 "wasn't tested and may be unstable."
 msgstr ""
+"\"Target SDK\" %d é superior à versão padrão %d. Isso pode funcionar, mas "
+"não foi testado e pode ser instável."
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -18985,9 +18924,8 @@ msgstr ""
 
 #: platform/android/export/export_plugin.cpp platform/osx/export/export.cpp
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Code Signing"
-msgstr "Sinal"
+msgstr "Assinatura de Código"
 
 #: platform/android/export/export_plugin.cpp
 msgid ""
@@ -19065,12 +19003,11 @@ msgstr ""
 "'Projeto'."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid ""
 "Unable to overwrite res://android/build/res/*.xml files with project name."
 msgstr ""
 "Incapaz de sobrescrever os arquivos res://android/build/res/*.xml com o nome "
-"do projeto"
+"do projeto."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Could not export project files to gradle project."
@@ -19246,30 +19183,25 @@ msgid "Identifier"
 msgstr "Identificador"
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Signature"
-msgstr "Sinal"
+msgstr "Assinatura"
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Short Version"
-msgstr "Versão"
+msgstr "Versão Curta"
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Copyright"
-msgstr "Superior Direita"
+msgstr "Direitos Autorais"
 
 #: platform/iphone/export/export.cpp
-#, fuzzy
 msgid "Capabilities"
-msgstr "Colar Propriedades"
+msgstr "Capacidades"
 
 #: platform/iphone/export/export.cpp
-#, fuzzy
 msgid "Access Wi-Fi"
-msgstr "Acesso"
+msgstr "Acessar Wi-Fi"
 
 #: platform/iphone/export/export.cpp
 msgid "Push Notifications"
@@ -19288,19 +19220,16 @@ msgid "Accessible From iTunes Sharing"
 msgstr ""
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Privacy"
-msgstr "Caminho da chave privada SSH"
+msgstr "Privacidade"
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Camera Usage Description"
-msgstr "Descrição"
+msgstr "Descrição do Uso da Câmera"
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Microphone Usage Description"
-msgstr "Descrições da Propriedade"
+msgstr "Descrição do Uso do Microfone"
 
 #: platform/iphone/export/export.cpp
 #, fuzzy
@@ -19329,7 +19258,7 @@ msgstr "iPad 167 X 167"
 
 #: platform/iphone/export/export.cpp
 msgid "App Store 1024 X 1024"
-msgstr ""
+msgstr "Apple Store 1024 X 1024"
 
 #: platform/iphone/export/export.cpp
 msgid "Spotlight 40 X 40"
@@ -19348,9 +19277,8 @@ msgid "Use Launch Screen Storyboard"
 msgstr ""
 
 #: platform/iphone/export/export.cpp
-#, fuzzy
 msgid "Image Scale Mode"
-msgstr "Modo de Escalonamento"
+msgstr "Modo de Escalonamento de Imagem"
 
 #: platform/iphone/export/export.cpp
 #, fuzzy
@@ -19363,25 +19291,26 @@ msgid "Custom Image @3x"
 msgstr "Recortar Nós"
 
 #: platform/iphone/export/export.cpp
-#, fuzzy
 msgid "Use Custom BG Color"
-msgstr "Recortar Nós"
+msgstr "Usar Cor Personalizada de Fundo"
 
 #: platform/iphone/export/export.cpp
-#, fuzzy
 msgid "Custom BG Color"
-msgstr "Recortar Nós"
+msgstr "Cor Personalizada de Fundo"
+
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Exportar Ícone"
 
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Prepare Templates"
-msgstr "Gerenciar Templates"
+msgstr "Preparar Templates"
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Export template not found."
-msgstr "Template customizado de release não encontrado."
+msgstr "Template exportado não encontrado."
 
 #: platform/iphone/export/export.cpp
 msgid "App Store Team ID not specified - cannot configure the project."
@@ -19417,9 +19346,8 @@ msgid "Could not write file: \"%s\"."
 msgstr "Não foi possível escrever o arquivo: \"%s\"."
 
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Icon Creation"
-msgstr "Definir Margem"
+msgstr "Criação de Ícone"
 
 #: platform/javascript/export/export.cpp
 msgid "Could not read file: \"%s\"."
@@ -19434,9 +19362,8 @@ msgid "Variant"
 msgstr "Variante"
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Export Type"
-msgstr "Exportação"
+msgstr "Tipo de Exportação"
 
 #: platform/javascript/export/export.cpp
 #, fuzzy
@@ -19456,9 +19383,8 @@ msgid "HTML"
 msgstr "HTML"
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Export Icon"
-msgstr "Expandir Tudo"
+msgstr "Exportar Ícone"
 
 #: platform/javascript/export/export.cpp
 #, fuzzy
@@ -19474,14 +19400,12 @@ msgid "Canvas Resize Policy"
 msgstr ""
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Focus Canvas On Start"
 msgstr "Focar Canvas ao Iniciar"
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Experimental Virtual Keyboard"
-msgstr "Filtrar sinais"
+msgstr "Teclado Virtual Experimental"
 
 #: platform/javascript/export/export.cpp
 msgid "Progressive Web App"
@@ -19493,15 +19417,15 @@ msgstr "Página Offline"
 
 #: platform/javascript/export/export.cpp
 msgid "Icon 144 X 144"
-msgstr ""
+msgstr "Ícone 144 X 144"
 
 #: platform/javascript/export/export.cpp
 msgid "Icon 180 X 180"
-msgstr ""
+msgstr "Ícone 180 X 180"
 
 #: platform/javascript/export/export.cpp
 msgid "Icon 512 X 512"
-msgstr ""
+msgstr "Ícone 512 X 512"
 
 #: platform/javascript/export/export.cpp
 msgid "Could not read HTML shell: \"%s\"."
@@ -19521,16 +19445,15 @@ msgstr "Web"
 
 #: platform/javascript/export/export.cpp
 msgid "HTTP Host"
-msgstr ""
+msgstr "Host HTTP"
 
 #: platform/javascript/export/export.cpp
 msgid "HTTP Port"
-msgstr ""
+msgstr "Porta HTTP"
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Use SSL"
-msgstr "Use Encaixar"
+msgstr "Usar SSL"
 
 #: platform/javascript/export/export.cpp
 msgid "SSL Key"
@@ -19538,7 +19461,7 @@ msgstr "Chave SSL"
 
 #: platform/osx/export/codesign.cpp
 msgid "Can't get filesystem access."
-msgstr ""
+msgstr "Não conseguiu acesso ao sistema de arquivos."
 
 #: platform/osx/export/codesign.cpp
 msgid "Failed to get Info.plist hash."
@@ -19559,27 +19482,24 @@ msgid "Invalid Info.plist, can't load."
 msgstr "Geometria inválida, não é possível criar o polígono."
 
 #: platform/osx/export/codesign.cpp
-#, fuzzy
 msgid "Failed to create \"%s\" subfolder."
-msgstr "Não foi possível criar a pasta."
+msgstr "Falha ao criar sub-pasta \"%s\"."
 
 #: platform/osx/export/codesign.cpp
 msgid "Failed to extract thin binary."
 msgstr ""
 
 #: platform/osx/export/codesign.cpp
-#, fuzzy
 msgid "Invalid binary format."
-msgstr "Caminho base inválido."
+msgstr "Formato de binário inválido."
 
 #: platform/osx/export/codesign.cpp
 msgid "Already signed!"
 msgstr "Já assinado!"
 
 #: platform/osx/export/codesign.cpp
-#, fuzzy
 msgid "Failed to process nested resources."
-msgstr "Falha ao carregar recurso."
+msgstr "Falha ao processar recursos aninhados."
 
 #: platform/osx/export/codesign.cpp
 msgid "Failed to create _CodeSignature subfolder."
@@ -19596,9 +19516,8 @@ msgid "Invalid entitlements file."
 msgstr "Extensão inválida."
 
 #: platform/osx/export/codesign.cpp
-#, fuzzy
 msgid "Invalid executable file."
-msgstr "Extensão inválida."
+msgstr "Arquivo executável inválido."
 
 #: platform/osx/export/codesign.cpp
 msgid "Can't resize signature load command."
@@ -19625,37 +19544,32 @@ msgid "High Res"
 msgstr "Alta Resolução"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Location Usage Description"
-msgstr "Descrição"
+msgstr "Descrição do Uso da Localização"
 
 #: platform/osx/export/export.cpp
 msgid "Address Book Usage Description"
-msgstr ""
+msgstr "Descrição do Uso dos Contatos"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Calendar Usage Description"
-msgstr "Descrição"
+msgstr "Descrição do Uso do Calendário"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Photos Library Usage Description"
-msgstr "Descrições da Propriedade"
+msgstr "Descrição do Uso da Biblioteca de Fotos"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Desktop Folder Usage Description"
-msgstr "Descrições do Método"
+msgstr "Descrição do Uso da Pasta da Área de Trabalho"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Documents Folder Usage Description"
-msgstr "Descrições do Método"
+msgstr "Descrição do Uso da Pasta de Documentos"
 
 #: platform/osx/export/export.cpp
 msgid "Downloads Folder Usage Description"
-msgstr ""
+msgstr "Descrição do Uso da Pasta de Downloads"
 
 #: platform/osx/export/export.cpp
 msgid "Network Volumes Usage Description"
@@ -19672,23 +19586,20 @@ msgstr "Nós"
 
 #: platform/osx/export/export.cpp platform/uwp/export/export.cpp
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Identity"
-msgstr "Recuar Esquerda"
+msgstr "Identidade"
 
 #: platform/osx/export/export.cpp platform/windows/export/export.cpp
-#, fuzzy
 msgid "Timestamp"
-msgstr "Tempo"
+msgstr "Registro do Tempo"
 
 #: platform/osx/export/export.cpp
 msgid "Hardened Runtime"
 msgstr ""
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Replace Existing Signature"
-msgstr "Substituir em Arquivos"
+msgstr "Substituir Assinatura Existente"
 
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19696,9 +19607,8 @@ msgid "Entitlements"
 msgstr "Gizmos"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Custom File"
-msgstr "Recortar Nós"
+msgstr "Arquivo Personalizado"
 
 #: platform/osx/export/export.cpp
 msgid "Allow JIT Code Execution"
@@ -19713,14 +19623,12 @@ msgid "Allow Dyld Environment Variables"
 msgstr ""
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Disable Library Validation"
-msgstr "Botão Desativado"
+msgstr "Desativar Validação da Biblioteca"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Audio Input"
-msgstr "Adicionar Entrada"
+msgstr "Entrada de Áudio"
 
 #: platform/osx/export/export.cpp
 msgid "Address Book"
@@ -19731,17 +19639,14 @@ msgid "Calendars"
 msgstr "Calendários"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Photos Library"
-msgstr "Exportar Biblioteca"
+msgstr "Biblioteca de Fotos"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Apple Events"
-msgstr "Adicionar VEvento"
+msgstr "Eventos Apple"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Debugging"
 msgstr "Depuração"
 
@@ -19750,28 +19655,24 @@ msgid "App Sandbox"
 msgstr ""
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Network Server"
-msgstr "Perfis de rede"
+msgstr "Servidor de Rede"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Network Client"
-msgstr "Perfis de rede"
+msgstr "Cliente de Rede"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Device USB"
-msgstr "Dispositivo"
+msgstr "Dispositivo USB"
 
 #: platform/osx/export/export.cpp
 msgid "Device Bluetooth"
 msgstr "Bluetooth do Dispositivo"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Files Downloads"
-msgstr "Baixar"
+msgstr "Download de Arquivos"
 
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19789,9 +19690,8 @@ msgid "Files Movies"
 msgstr "Filtros do tile"
 
 #: platform/osx/export/export.cpp platform/windows/export/export.cpp
-#, fuzzy
 msgid "Custom Options"
-msgstr "Opções do canal"
+msgstr "Opções Personalizadas"
 
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19800,7 +19700,7 @@ msgstr "Localização"
 
 #: platform/osx/export/export.cpp
 msgid "Apple ID Name"
-msgstr ""
+msgstr "Nome Apple ID"
 
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19809,7 +19709,7 @@ msgstr "Senha"
 
 #: platform/osx/export/export.cpp
 msgid "Apple Team ID"
-msgstr ""
+msgstr "ID Apple Team"
 
 #: platform/osx/export/export.cpp
 msgid "Could not open icon file \"%s\"."
@@ -19873,23 +19773,20 @@ msgstr ""
 "utilidades de linha de comando do Xcode estão instaladas."
 
 #: platform/osx/export/export.cpp platform/windows/export/export.cpp
-#, fuzzy
 msgid "No identity found."
-msgstr "Ícones não encontrados."
+msgstr "Nenhuma identidade encontrada."
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Cannot sign file %s."
-msgstr "Erro ao salvar o arquivo: %s"
+msgstr "Erro ao assinar arquivo %s."
 
 #: platform/osx/export/export.cpp
 msgid "Relative symlinks are not supported, exported \"%s\" might be broken!"
 msgstr ""
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "DMG Creation"
-msgstr "Direções"
+msgstr "Criação de DMG"
 
 #: platform/osx/export/export.cpp
 msgid "Could not start hdiutil executable."
@@ -19897,11 +19794,11 @@ msgstr "Não foi possível iniciar o executável hdiutil."
 
 #: platform/osx/export/export.cpp
 msgid "`hdiutil create` failed - file exists."
-msgstr ""
+msgstr "`hdiutil create` falhou - arquivo existe."
 
 #: platform/osx/export/export.cpp
 msgid "`hdiutil create` failed."
-msgstr ""
+msgstr "`hdiutil create` falhou."
 
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19966,9 +19863,8 @@ msgid "Sending archive for notarization"
 msgstr ""
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "ZIP Creation"
-msgstr "Projeção"
+msgstr "Criação de ZIP"
 
 #: platform/osx/export/export.cpp
 msgid "Could not open file to read from path \"%s\"."
@@ -20023,6 +19919,8 @@ msgid ""
 "Warning: Notarization is disabled. The exported project will be blocked by "
 "Gatekeeper if it's downloaded from an unknown source."
 msgstr ""
+"Aviso: Notarização está desativada. O projeto exportado será bloqueado pelo "
+"Gatekeeper se for baixado de uma fonte desconhecida."
 
 #: platform/osx/export/export.cpp
 msgid ""
@@ -20106,9 +20004,8 @@ msgid "Architecture"
 msgstr "Arquitetura"
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Display Name"
-msgstr "Exibir Tudo"
+msgstr "Nome de Exibição"
 
 #: platform/uwp/export/export.cpp
 msgid "Short Name"
@@ -20137,9 +20034,8 @@ msgid "Signing"
 msgstr "Sinal"
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Certificate"
-msgstr "Certificados"
+msgstr "Certificado"
 
 #: platform/uwp/export/export.cpp
 msgid "Algorithm"
@@ -20167,9 +20063,8 @@ msgid "Landscape"
 msgstr "Paisagem"
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Portrait"
-msgstr "Inverter Horizontalmente"
+msgstr "Retrato"
 
 #: platform/uwp/export/export.cpp
 msgid "Landscape Flipped"
@@ -20186,19 +20081,19 @@ msgstr "Modo de Escalonamento"
 
 #: platform/uwp/export/export.cpp
 msgid "Square 44 X 44 Logo"
-msgstr ""
+msgstr "Logo Quadrada 44 X 44"
 
 #: platform/uwp/export/export.cpp
 msgid "Square 71 X 71 Logo"
-msgstr ""
+msgstr "Logo Quadrada 71 X 71"
 
 #: platform/uwp/export/export.cpp
 msgid "Square 150 X 150 Logo"
-msgstr ""
+msgstr "Logo Quadrada 150 X 150"
 
 #: platform/uwp/export/export.cpp
 msgid "Square 310 X 310 Logo"
-msgstr ""
+msgstr "Logo Quadrada 310 X 310"
 
 #: platform/uwp/export/export.cpp
 msgid "Wide 310 X 150 Logo"
@@ -20209,9 +20104,8 @@ msgid "Splash Screen"
 msgstr "Tela de Abertura"
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Tiles"
-msgstr "Arquivo"
+msgstr "Tiles"
 
 #: platform/uwp/export/export.cpp
 msgid "Show Name On Square 150 X 150"
@@ -20226,6 +20120,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Nome de pacote inválido."
 
@@ -20291,9 +20191,8 @@ msgid "Debug Certificate"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Debug Algorithm"
-msgstr "Depurador"
+msgstr "Algoritmo de Depuração"
 
 #: platform/windows/export/export.cpp
 msgid "Failed to rename temporary file \"%s\"."
@@ -20314,14 +20213,12 @@ msgid "Digest Algorithm"
 msgstr "Depurador"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Modify Resources"
-msgstr "Copiar Recurso"
+msgstr "Modificar Recursos"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "File Version"
-msgstr "Versão"
+msgstr "Versão do Arquivo"
 
 #: platform/windows/export/export.cpp
 msgid "Product Version"
@@ -20336,18 +20233,16 @@ msgid "Product Name"
 msgstr "Nome do Produto"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "File Description"
-msgstr "Descrição"
+msgstr "Descrição do Arquivo"
 
 #: platform/windows/export/export.cpp
 msgid "Trademarks"
 msgstr "Marca Registrada (Trademarks)"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Resources Modification"
-msgstr "Notificações Push"
+msgstr "Modificações dos Recursos"
 
 #: platform/windows/export/export.cpp
 #, fuzzy
@@ -20426,7 +20321,7 @@ msgstr "Versão de produto inválida:"
 
 #: platform/windows/export/export.cpp
 msgid "Windows executables cannot be >= 4 GiB."
-msgstr ""
+msgstr "Executáveis Windows não podem ser >= 4GiB."
 
 #: platform/windows/export/export.cpp platform/x11/export/export.cpp
 #, fuzzy
@@ -20438,13 +20333,13 @@ msgid "Executable file header corrupted."
 msgstr ""
 
 #: platform/windows/export/export.cpp platform/x11/export/export.cpp
+#, fuzzy
 msgid "Executable \"pck\" section not found."
-msgstr ""
+msgstr "Executável seção \"pck\" não encontrado."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Windows"
-msgstr "Nova Janela"
+msgstr "Windows"
 
 #: platform/windows/export/export.cpp
 msgid "Rcedit"
@@ -20456,7 +20351,7 @@ msgstr ""
 
 #: platform/windows/export/export.cpp
 msgid "Wine"
-msgstr ""
+msgstr "Wine"
 
 #: platform/x11/export/export.cpp
 msgid "32-bit executables cannot have embedded data >= 4 GiB."
@@ -20464,9 +20359,8 @@ msgstr ""
 
 #: scene/2d/animated_sprite.cpp scene/3d/sprite_3d.cpp
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Frames"
-msgstr "Frame %"
+msgstr "Quadros"
 
 #: scene/2d/animated_sprite.cpp
 msgid ""
@@ -20478,21 +20372,18 @@ msgstr ""
 
 #: scene/2d/animated_sprite.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/particles_2d.cpp scene/3d/cpu_particles.cpp scene/3d/particles.cpp
-#, fuzzy
 msgid "Speed Scale"
-msgstr "Escala"
+msgstr "Escalonamento da Velocidade"
 
 #: scene/2d/animated_sprite.cpp scene/2d/audio_stream_player_2d.cpp
 #: scene/3d/audio_stream_player_3d.cpp scene/3d/sprite_3d.cpp
 #: scene/audio/audio_stream_player.cpp
-#, fuzzy
 msgid "Playing"
-msgstr "Rodar"
+msgstr "Rodando"
 
 #: scene/2d/animated_sprite.cpp scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
-#, fuzzy
 msgid "Centered"
-msgstr "Centro"
+msgstr "Centralizado"
 
 #: scene/2d/animated_sprite.cpp scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
 #: scene/gui/texture_button.cpp scene/gui/texture_rect.cpp
@@ -20505,14 +20396,12 @@ msgid "Flip V"
 msgstr ""
 
 #: scene/2d/area_2d.cpp scene/3d/area.cpp
-#, fuzzy
 msgid "Monitoring"
-msgstr "Monitor"
+msgstr "Monitorando"
 
 #: scene/2d/area_2d.cpp scene/3d/area.cpp
-#, fuzzy
 msgid "Monitorable"
-msgstr "Monitor"
+msgstr "Monitorável"
 
 #: scene/2d/area_2d.cpp scene/3d/area.cpp
 #, fuzzy
@@ -20525,9 +20414,8 @@ msgid "Space Override"
 msgstr "Sobrescreve"
 
 #: scene/2d/area_2d.cpp scene/3d/area.cpp
-#, fuzzy
 msgid "Gravity Point"
-msgstr "Gerar Pontos"
+msgstr "Ponto de Gravidade"
 
 #: scene/2d/area_2d.cpp scene/3d/area.cpp
 #, fuzzy
@@ -20554,38 +20442,33 @@ msgid "Angular Damp"
 msgstr ""
 
 #: scene/2d/area_2d.cpp scene/3d/area.cpp
-#, fuzzy
 msgid "Audio Bus"
-msgstr "Adicionar Canal de Áudio"
+msgstr "Canal de Áudio"
 
 #: scene/2d/area_2d.cpp scene/3d/area.cpp
-#, fuzzy
 msgid "Override"
-msgstr "Sobrescreve"
+msgstr "Sobrescrever"
 
 #: scene/2d/audio_stream_player_2d.cpp scene/audio/audio_stream_player.cpp
 #: scene/gui/video_player.cpp servers/audio/effects/audio_effect_amplify.cpp
-#, fuzzy
 msgid "Volume dB"
-msgstr "Volume"
+msgstr "Volume dB (decibéis)"
 
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 #: scene/audio/audio_stream_player.cpp
 #: servers/audio/effects/audio_effect_pitch_shift.cpp
-#, fuzzy
 msgid "Pitch Scale"
-msgstr "Escala"
+msgstr "Escalonamento de Pitch"
 
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 #: scene/audio/audio_stream_player.cpp scene/gui/video_player.cpp
-#, fuzzy
 msgid "Autoplay"
-msgstr "Alternar Início Automático"
+msgstr "Rodar automaticamente"
 
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 #: scene/audio/audio_stream_player.cpp
 msgid "Stream Paused"
-msgstr ""
+msgstr "Fluxo Pausado"
 
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 #: scene/3d/light.cpp scene/3d/reflection_probe.cpp
@@ -20601,23 +20484,20 @@ msgstr "Animação"
 
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 #: scene/audio/audio_stream_player.cpp scene/gui/video_player.cpp
-#, fuzzy
 msgid "Bus"
-msgstr "Adicionar Canal"
+msgstr "Canal"
 
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 msgid "Area Mask"
 msgstr ""
 
 #: scene/2d/back_buffer_copy.cpp
-#, fuzzy
 msgid "Copy Mode"
-msgstr "Copiar Nós"
+msgstr "Mode de Cópia"
 
 #: scene/2d/camera_2d.cpp
-#, fuzzy
 msgid "Anchor Mode"
-msgstr "Modo Ícone"
+msgstr "Modo de Âncora"
 
 #: scene/2d/camera_2d.cpp
 msgid "Rotating"
@@ -20629,9 +20509,8 @@ msgid "Current"
 msgstr "Atual"
 
 #: scene/2d/camera_2d.cpp scene/gui/graph_edit.cpp
-#, fuzzy
 msgid "Zoom"
-msgstr "Ampliar"
+msgstr "Zoom"
 
 #: scene/2d/camera_2d.cpp scene/main/canvas_layer.cpp
 #, fuzzy
@@ -20651,27 +20530,23 @@ msgstr "Limite"
 
 #: scene/2d/camera_2d.cpp scene/gui/control.cpp scene/gui/nine_patch_rect.cpp
 #: scene/resources/style_box.cpp scene/resources/texture.cpp
-#, fuzzy
 msgid "Left"
-msgstr "Esquerda (UI)"
+msgstr "Esquerda"
 
 #: scene/2d/camera_2d.cpp scene/gui/control.cpp scene/gui/nine_patch_rect.cpp
 #: scene/resources/style_box.cpp scene/resources/texture.cpp
-#, fuzzy
 msgid "Right"
-msgstr "Luz"
+msgstr "Direita"
 
 #: scene/2d/camera_2d.cpp scene/gui/control.cpp scene/gui/nine_patch_rect.cpp
 #: scene/resources/dynamic_font.cpp scene/resources/style_box.cpp
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Bottom"
-msgstr "Inferior Esquerda"
+msgstr "Embaixo"
 
 #: scene/2d/camera_2d.cpp
-#, fuzzy
 msgid "Smoothed"
-msgstr "Passo suave"
+msgstr "Suavizado"
 
 #: scene/2d/camera_2d.cpp
 #, fuzzy
@@ -20689,9 +20564,8 @@ msgid "Drag Margin V Enabled"
 msgstr "Definir Margem"
 
 #: scene/2d/camera_2d.cpp
-#, fuzzy
 msgid "Smoothing"
-msgstr "Passo suave"
+msgstr "Suavizamento"
 
 #: scene/2d/camera_2d.cpp
 msgid "H"
@@ -20732,9 +20606,8 @@ msgid "Light Mode"
 msgstr "Largura Direita"
 
 #: scene/2d/canvas_item.cpp
-#, fuzzy
 msgid "Particles Animation"
-msgstr "Partículas"
+msgstr "Animação de Partículas"
 
 #: scene/2d/canvas_item.cpp
 msgid "Particles Anim H Frames"
@@ -20750,15 +20623,13 @@ msgid "Particles Anim Loop"
 msgstr "Partículas"
 
 #: scene/2d/canvas_item.cpp scene/3d/spatial.cpp
-#, fuzzy
 msgid "Visibility"
-msgstr "Alternar Visibilidade"
+msgstr "Visibilidade"
 
 #: scene/2d/canvas_item.cpp scene/3d/spatial.cpp scene/gui/progress_bar.cpp
 #: scene/gui/rich_text_effect.cpp scene/main/canvas_layer.cpp
-#, fuzzy
 msgid "Visible"
-msgstr "Alternar Visibilidade"
+msgstr "Visível"
 
 #: scene/2d/canvas_item.cpp
 #, fuzzy
@@ -20767,22 +20638,20 @@ msgstr "Popular"
 
 #: scene/2d/canvas_item.cpp
 msgid "Show Behind Parent"
-msgstr ""
+msgstr "Mostrar Atrás do Pai"
 
 #: scene/2d/canvas_item.cpp
-#, fuzzy
 msgid "Show On Top"
-msgstr "Mostrar Origem"
+msgstr "Mostrar Em Cima"
 
 #: scene/2d/canvas_item.cpp scene/2d/light_occluder_2d.cpp
 #: scene/2d/tile_map.cpp
-#, fuzzy
 msgid "Light Mask"
-msgstr "Luz"
+msgstr "Máscara de Luz"
 
 #: scene/2d/canvas_item.cpp
 msgid "Use Parent Material"
-msgstr ""
+msgstr "Usar Material do Pai"
 
 #: scene/2d/canvas_modulate.cpp
 msgid ""
@@ -20805,9 +20674,8 @@ msgstr ""
 "para definir sua forma."
 
 #: scene/2d/collision_object_2d.cpp
-#, fuzzy
 msgid "Pickable"
-msgstr "Escolher Tile"
+msgstr "Pegável"
 
 #: scene/2d/collision_polygon_2d.cpp
 msgid ""
@@ -20849,9 +20717,8 @@ msgstr "Modo de Régua"
 #: scene/3d/collision_polygon.cpp scene/3d/collision_shape.cpp
 #: scene/animation/animation_node_state_machine.cpp scene/gui/base_button.cpp
 #: scene/gui/texture_button.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Disabled"
-msgstr "Item Desativado"
+msgstr "Desativado"
 
 #: scene/2d/collision_polygon_2d.cpp scene/2d/collision_shape_2d.cpp
 #, fuzzy
@@ -20935,9 +20802,8 @@ msgstr ""
 
 #: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
-#, fuzzy
 msgid "Fixed FPS"
-msgstr "Ver FPS"
+msgstr "FPS Fixado"
 
 #: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
@@ -20951,9 +20817,8 @@ msgstr "Desenhando"
 
 #: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
-#, fuzzy
 msgid "Local Coords"
-msgstr "Projetos Locais"
+msgstr "Coordenadas Locais"
 
 #: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
@@ -20962,9 +20827,8 @@ msgstr "Ordem de Desenho"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Emission Shape"
-msgstr "Máscara de Emissão"
+msgstr "Forma de Emissão"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
@@ -20977,9 +20841,8 @@ msgid "Rect Extents"
 msgstr "Gizmos"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
-#, fuzzy
 msgid "Normals"
-msgstr "Formato"
+msgstr "Normais"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
@@ -20989,9 +20852,8 @@ msgstr "Atribuir"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Direction"
-msgstr "Direções"
+msgstr "Direção"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
@@ -21001,15 +20863,13 @@ msgstr "Espalhar"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Initial Velocity"
-msgstr "Inicializar"
+msgstr "Velocidade Inicial"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Velocity Random"
-msgstr "Velocidade"
+msgstr "Velocidade Aleatória"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp servers/physics_2d_server.cpp
@@ -21019,48 +20879,43 @@ msgstr "Velocidade Angular"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Velocity Curve"
-msgstr "Velocidade"
+msgstr "Curva de Velocidade"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Orbit Velocity"
-msgstr "Orbitar Visão para a Direita"
+msgstr "Velocidade Orbital"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Linear Accel"
-msgstr "Linear"
+msgstr "Aceleração Linear"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Accel"
-msgstr "Acesso"
+msgstr "Aceleração"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
 msgid "Accel Random"
-msgstr ""
+msgstr "Aceleração Aleatória"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Accel Curve"
-msgstr "Dvidir Curva"
+msgstr "Curva de Aceleração"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
 msgid "Radial Accel"
-msgstr ""
+msgstr "Aceleração Radial"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
 msgid "Tangential Accel"
-msgstr ""
+msgstr "Aceleração Tangencial"
 
 #: scene/2d/cpu_particles_2d.cpp scene/2d/joints_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/physics_body.cpp
@@ -21089,13 +20944,12 @@ msgstr "Ângulo"
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
 msgid "Angle Random"
-msgstr ""
+msgstr "Ângulo Aleatório"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Angle Curve"
-msgstr "Fechar Curva"
+msgstr "Curva do Ângulo"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 msgid "Scale Amount"
@@ -21143,15 +20997,13 @@ msgstr "Curva de Variação"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Speed Random"
-msgstr "Escala"
+msgstr "Velocidade Aleatória"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Speed Curve"
-msgstr "Dvidir Curva"
+msgstr "Curva de Velocidade"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
@@ -21199,9 +21051,8 @@ msgid "Bias"
 msgstr ""
 
 #: scene/2d/joints_2d.cpp
-#, fuzzy
 msgid "Disable Collision"
-msgstr "Botão Desativado"
+msgstr "Desativar Colisão"
 
 #: scene/2d/joints_2d.cpp scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
 msgid "Softness"
@@ -21238,9 +21089,8 @@ msgid "Editor Only"
 msgstr "Editor"
 
 #: scene/2d/light_2d.cpp
-#, fuzzy
 msgid "Texture Scale"
-msgstr "Região da Textura"
+msgstr "Escalonamento da Textura"
 
 #: scene/2d/light_2d.cpp scene/3d/baked_lightmap.cpp scene/3d/gi_probe.cpp
 #: scene/3d/light.cpp scene/resources/environment.cpp
@@ -21271,9 +21121,8 @@ msgid "Item Cull Mask"
 msgstr ""
 
 #: scene/2d/light_2d.cpp scene/3d/light.cpp scene/resources/style_box.cpp
-#, fuzzy
 msgid "Shadow"
-msgstr "Shader"
+msgstr "Sombra"
 
 #: scene/2d/light_2d.cpp
 #, fuzzy
@@ -21281,9 +21130,8 @@ msgid "Buffer Size"
 msgstr "Visão Traseira"
 
 #: scene/2d/light_2d.cpp
-#, fuzzy
 msgid "Gradient Length"
-msgstr "Gradiente Editado"
+msgstr "Comprimento do Gradiente"
 
 #: scene/2d/light_2d.cpp
 #, fuzzy
@@ -21291,9 +21139,8 @@ msgid "Filter Smooth"
 msgstr "Filtrar métodos"
 
 #: scene/2d/light_occluder_2d.cpp
-#, fuzzy
 msgid "Closed"
-msgstr "Fechar"
+msgstr "Fechado"
 
 #: scene/2d/light_occluder_2d.cpp scene/resources/material.cpp
 #, fuzzy
@@ -21313,28 +21160,24 @@ msgstr ""
 "O polígono para este oclusor está vazio. Por favor desenhe um polígono."
 
 #: scene/2d/line_2d.cpp
-#, fuzzy
 msgid "Width Curve"
-msgstr "Dvidir Curva"
+msgstr "Largura da Curva"
 
 #: scene/2d/line_2d.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Default Color"
-msgstr "Padrão"
+msgstr "Cor Padrão"
 
 #: scene/2d/line_2d.cpp scene/resources/texture.cpp
 msgid "Fill"
 msgstr "Preencher"
 
 #: scene/2d/line_2d.cpp scene/resources/texture.cpp
-#, fuzzy
 msgid "Gradient"
-msgstr "Gradiente Editado"
+msgstr "Gradiente"
 
 #: scene/2d/line_2d.cpp
-#, fuzzy
 msgid "Texture Mode"
-msgstr "Região da Textura"
+msgstr "Modo de Textura"
 
 #: scene/2d/line_2d.cpp
 msgid "Capping"
@@ -21364,7 +21207,7 @@ msgstr ""
 
 #: scene/2d/line_2d.cpp
 msgid "Round Precision"
-msgstr ""
+msgstr "Precisão do Arredondamento"
 
 #: scene/2d/line_2d.cpp scene/2d/polygon_2d.cpp
 #: scene/resources/dynamic_font.cpp
@@ -21548,7 +21391,6 @@ msgid "Mirroring"
 msgstr "Espelhar"
 
 #: scene/2d/particles_2d.cpp
-#, fuzzy
 msgid ""
 "GPU-based particles are not supported by the GLES2 video driver.\n"
 "Use the CPUParticles2D node instead. You can use the \"Convert to "
@@ -21594,9 +21436,8 @@ msgstr ""
 
 #: scene/2d/path_2d.cpp scene/3d/path.cpp scene/resources/sky.cpp
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Curve"
-msgstr "Dvidir Curva"
+msgstr "Curva"
 
 #: scene/2d/path_2d.cpp
 msgid "PathFollow2D only works when set as a child of a Path2D node."
@@ -21624,9 +21465,8 @@ msgid "Lookahead"
 msgstr ""
 
 #: scene/2d/physics_body_2d.cpp scene/3d/visual_instance.cpp
-#, fuzzy
 msgid "Layers"
-msgstr "Camada"
+msgstr "Camadas"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 msgid "Constant Linear Velocity"
@@ -21638,9 +21478,8 @@ msgstr "Velocidade Angular Constante"
 
 #: scene/2d/physics_body_2d.cpp scene/2d/tile_map.cpp scene/3d/physics_body.cpp
 #: scene/resources/physics_material.cpp
-#, fuzzy
 msgid "Friction"
-msgstr "Funções"
+msgstr "Fricção"
 
 #: scene/2d/physics_body_2d.cpp scene/2d/tile_map.cpp scene/3d/physics_body.cpp
 #: scene/resources/physics_material.cpp
@@ -21653,9 +21492,8 @@ msgstr ""
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Gravity"
-msgstr "Prévia Padrão"
+msgstr "Gravidade Padrão"
 
 #: scene/2d/physics_body_2d.cpp
 msgid ""
@@ -21676,13 +21514,12 @@ msgid "Inertia"
 msgstr "Inércia"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Weight"
-msgstr "Luz"
+msgstr "Peso"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 msgid "Gravity Scale"
-msgstr ""
+msgstr "Escala da Gravidade"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 msgid "Custom Integrator"
@@ -21722,7 +21559,7 @@ msgstr "Angular"
 
 #: scene/2d/physics_body_2d.cpp
 msgid "Applied Forces"
-msgstr ""
+msgstr "Forças Aplicadas"
 
 #: scene/2d/physics_body_2d.cpp
 msgid "Torque"
@@ -21750,56 +21587,49 @@ msgstr "Aplicar Velocidade ao Sair"
 #: scene/3d/physics_body.cpp scene/gui/texture_button.cpp
 #: scene/resources/default_theme/default_theme.cpp
 #: scene/resources/line_shape_2d.cpp scene/resources/material.cpp
-#, fuzzy
 msgid "Normal"
-msgstr "Formato"
+msgstr "Normal"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 msgid "Remainder"
 msgstr "Restante"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Local Shape"
-msgstr "Localizar"
+msgstr "Forma Local"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collider"
-msgstr "Modo Colisão"
+msgstr "Colisor"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Collider ID"
-msgstr ""
+msgstr "ID do Colisor"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collider RID"
-msgstr "RID inválido"
+msgstr "RID do Colisor"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collider Shape"
-msgstr "Modo Colisão"
+msgstr "Forma do Colisor"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Collider Shape Index"
-msgstr "Modo Colisão"
+msgstr "Índice da Forma do Colisor"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collider Velocity"
-msgstr "Orbitar Visão para a Direita"
+msgstr "Velocidade do Colisor"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 msgid "Collider Metadata"
-msgstr ""
+msgstr "Metadados do Colisor"
 
 #: scene/2d/polygon_2d.cpp
 msgid "Invert"
@@ -21822,7 +21652,7 @@ msgstr "Gizmos"
 
 #: scene/2d/ray_cast_2d.cpp scene/3d/ray_cast.cpp
 msgid "Exclude Parent"
-msgstr ""
+msgstr "Excluir Pai"
 
 #: scene/2d/ray_cast_2d.cpp scene/3d/ray_cast.cpp
 #, fuzzy
@@ -21848,14 +21678,12 @@ msgstr ""
 "funcionar."
 
 #: scene/2d/remote_transform_2d.cpp scene/3d/remote_transform.cpp
-#, fuzzy
 msgid "Remote Path"
-msgstr "Remover Ponto"
+msgstr "Remover Caminho"
 
 #: scene/2d/remote_transform_2d.cpp scene/3d/remote_transform.cpp
-#, fuzzy
 msgid "Use Global Coordinates"
-msgstr "Próxima Coordenada"
+msgstr "Usar Coordenadas Globais"
 
 #: scene/2d/skeleton_2d.cpp scene/3d/skeleton.cpp
 #, fuzzy
@@ -21910,14 +21738,12 @@ msgstr ""
 "KinematicBody2D, etc. para dar-lhes uma forma."
 
 #: scene/2d/tile_map.cpp
-#, fuzzy
 msgid "Tile Set"
-msgstr "Conjunto de Telha"
+msgstr "Tile Set"
 
 #: scene/2d/tile_map.cpp
-#, fuzzy
 msgid "Quadrant Size"
-msgstr "Alterar Tamanho da Câmera"
+msgstr "Tamanho do Quadrante"
 
 #: scene/2d/tile_map.cpp
 #, fuzzy
@@ -21930,9 +21756,8 @@ msgid "Half Offset"
 msgstr "Inicializar"
 
 #: scene/2d/tile_map.cpp
-#, fuzzy
 msgid "Tile Origin"
-msgstr "Ver Origem"
+msgstr "Origem do Tile"
 
 #: scene/2d/tile_map.cpp
 #, fuzzy
@@ -21957,7 +21782,7 @@ msgstr ""
 
 #: scene/2d/tile_map.cpp
 msgid "Use Parent"
-msgstr ""
+msgstr "Usar Pai"
 
 #: scene/2d/tile_map.cpp
 msgid "Use Kinematic"
@@ -21965,20 +21790,19 @@ msgstr ""
 
 #: scene/2d/touch_screen_button.cpp
 msgid "Shape Centered"
-msgstr ""
+msgstr "Forma Centralizada"
 
 #: scene/2d/touch_screen_button.cpp
 msgid "Shape Visible"
-msgstr ""
+msgstr "Forma Visível"
 
 #: scene/2d/touch_screen_button.cpp
 msgid "Passby Press"
 msgstr ""
 
 #: scene/2d/touch_screen_button.cpp
-#, fuzzy
 msgid "Visibility Mode"
-msgstr "Modo Prioridade"
+msgstr "Modo de Visibilidade"
 
 #: scene/2d/visibility_notifier_2d.cpp
 msgid ""
@@ -21989,23 +21813,20 @@ msgstr ""
 "diretamente como pai."
 
 #: scene/2d/visibility_notifier_2d.cpp scene/3d/visibility_notifier.cpp
-#, fuzzy
 msgid "Pause Animations"
-msgstr "Colar Animação"
+msgstr "Pausar Animações"
 
 #: scene/2d/visibility_notifier_2d.cpp scene/3d/visibility_notifier.cpp
 msgid "Freeze Bodies"
-msgstr ""
+msgstr "Congelar Corpos"
 
 #: scene/2d/visibility_notifier_2d.cpp
-#, fuzzy
 msgid "Pause Particles"
-msgstr "Partículas"
+msgstr "Pausar Partículas"
 
 #: scene/2d/visibility_notifier_2d.cpp
-#, fuzzy
 msgid "Pause Animated Sprites"
-msgstr "Colar Animação"
+msgstr "Pausar Sprites Animados"
 
 #: scene/2d/visibility_notifier_2d.cpp
 #, fuzzy
@@ -22035,7 +21856,7 @@ msgstr ""
 
 #: scene/3d/arvr_nodes.cpp servers/arvr/arvr_positional_tracker.cpp
 msgid "Rumble"
-msgstr ""
+msgstr "Vibrar"
 
 #: scene/3d/arvr_nodes.cpp
 msgid "ARVRController must have an ARVROrigin node as its parent."
@@ -22120,14 +21941,12 @@ msgstr ""
 
 #: scene/3d/audio_stream_player_3d.cpp
 #: servers/audio/effects/audio_effect_filter.cpp
-#, fuzzy
 msgid "dB"
-msgstr "B"
+msgstr "dB"
 
 #: scene/3d/audio_stream_player_3d.cpp
-#, fuzzy
 msgid "Doppler"
-msgstr "Ativar Doppler"
+msgstr "Doppler"
 
 #: scene/3d/audio_stream_player_3d.cpp
 #, fuzzy
@@ -22191,9 +22010,8 @@ msgid "Use HDR"
 msgstr "Usar HDR"
 
 #: scene/3d/baked_lightmap.cpp
-#, fuzzy
 msgid "Use Color"
-msgstr "Cores"
+msgstr "Usar Cor"
 
 #: scene/3d/baked_lightmap.cpp
 #, fuzzy
@@ -22205,32 +22023,28 @@ msgid "Atlas"
 msgstr "Atlas"
 
 #: scene/3d/baked_lightmap.cpp
-#, fuzzy
 msgid "Generate"
-msgstr "Geral"
+msgstr "Gerar"
 
 #: scene/3d/baked_lightmap.cpp
 msgid "Max Size"
 msgstr "Tamanho Máximo"
 
 #: scene/3d/baked_lightmap.cpp
-#, fuzzy
 msgid "Custom Sky"
-msgstr "Recortar Nós"
+msgstr "Céu Personalizado"
 
 #: scene/3d/baked_lightmap.cpp
 msgid "Custom Sky Rotation Degrees"
 msgstr "Graus de Rotação do Céu Personalizados"
 
 #: scene/3d/baked_lightmap.cpp scene/3d/ray_cast.cpp
-#, fuzzy
 msgid "Custom Color"
-msgstr "Recortar Nós"
+msgstr "Cor Personalizada"
 
 #: scene/3d/baked_lightmap.cpp
-#, fuzzy
 msgid "Custom Energy"
-msgstr "Mover Efeito de Canal"
+msgstr "Energia Personalizada"
 
 #: scene/3d/baked_lightmap.cpp
 #, fuzzy
@@ -22406,28 +22220,24 @@ msgid "Ring Axis"
 msgstr "Avisos"
 
 #: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Rotate Y"
-msgstr "Rotacionar"
+msgstr "Rotacionar em Y"
 
 #: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Disable Z"
-msgstr "Item Desativado"
+msgstr "Desativar Z"
 
 #: scene/3d/cpu_particles.cpp scene/resources/particles_material.cpp
 msgid "Flatness"
 msgstr ""
 
 #: scene/3d/cull_instance.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "Portals"
-msgstr "Inverter Horizontalmente"
+msgstr "Portais"
 
 #: scene/3d/cull_instance.cpp
-#, fuzzy
 msgid "Portal Mode"
-msgstr "Modo Prioridade"
+msgstr "Modo Portal"
 
 #: scene/3d/cull_instance.cpp
 msgid "Include In Bound"
@@ -22482,9 +22292,8 @@ msgstr ""
 
 #: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
 #: scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Pixel Size"
-msgstr "Snap de Pixel"
+msgstr "Tamanho de Pixel"
 
 #: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
 msgid "Billboard"
@@ -22505,9 +22314,8 @@ msgid "No Depth Test"
 msgstr ""
 
 #: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp scene/resources/material.cpp
-#, fuzzy
 msgid "Fixed Size"
-msgstr "Visão Frontal"
+msgstr "Tamanho Fixo"
 
 #: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp
 msgid "Alpha Cut"
@@ -22534,18 +22342,16 @@ msgstr "Forçar Módulo Branco"
 
 #: scene/3d/label_3d.cpp scene/resources/default_theme/default_theme.cpp
 #: scene/resources/dynamic_font.cpp scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Font"
-msgstr "Fontes"
+msgstr "Fonte"
 
 #: scene/3d/label_3d.cpp scene/resources/primitive_meshes.cpp
 msgid "Horizontal Alignment"
 msgstr "Alinhamento Horizontal"
 
 #: scene/3d/label_3d.cpp
-#, fuzzy
 msgid "Vertical Alignment"
-msgstr "Filtrar sinais"
+msgstr "Alinhamento Vertical"
 
 #: scene/3d/label_3d.cpp scene/gui/dialogs.cpp scene/gui/label.cpp
 #, fuzzy
@@ -22553,9 +22359,8 @@ msgid "Autowrap"
 msgstr "AutoLoad"
 
 #: scene/3d/light.cpp
-#, fuzzy
 msgid "Indirect Energy"
-msgstr "Cores de Emissão"
+msgstr "Energia Indireta"
 
 #: scene/3d/light.cpp
 msgid "Negative"
@@ -22631,7 +22436,7 @@ msgstr "Um SpotLight com um ângulo maior que 90 graus não pode criar sombras."
 
 #: scene/3d/light.cpp
 msgid "Spot"
-msgstr ""
+msgstr "Ponto"
 
 #: scene/3d/light.cpp
 msgid "Angle Attenuation"
@@ -22669,9 +22474,8 @@ msgid "Agent Height Offset"
 msgstr ""
 
 #: scene/3d/navigation_agent.cpp
-#, fuzzy
 msgid "Ignore Y"
-msgstr "(Ignore)"
+msgstr "Ignorar Y"
 
 #: scene/3d/navigation_agent.cpp
 msgid ""
@@ -22679,9 +22483,8 @@ msgid ""
 msgstr ""
 
 #: scene/3d/navigation_mesh_instance.cpp scene/resources/mesh_library.cpp
-#, fuzzy
 msgid "NavMesh"
-msgstr "Bake NavMesh"
+msgstr "NavMesh"
 
 #: scene/3d/navigation_obstacle.cpp
 msgid ""
@@ -22698,7 +22501,6 @@ msgid "Only uniform scales are supported."
 msgstr "Apenas escalas uniformes são suportadas."
 
 #: scene/3d/particles.cpp
-#, fuzzy
 msgid ""
 "GPU-based particles are not supported by the GLES2 video driver.\n"
 "Use the CPUParticles node instead. You can use the \"Convert to "
@@ -22731,9 +22533,8 @@ msgstr ""
 "Billboard está definido como \"Particle Billboard\"."
 
 #: scene/3d/particles.cpp
-#, fuzzy
 msgid "Visibility AABB"
-msgstr "Alternar Visibilidade"
+msgstr "Visibilidade AABB"
 
 #: scene/3d/particles.cpp
 msgid "Draw Passes"
@@ -22756,7 +22557,6 @@ msgstr ""
 "no recurso de Curva do Caminho do seu pai."
 
 #: scene/3d/path.cpp
-#, fuzzy
 msgid "Rotation Mode"
 msgstr "Modo de Rotação"
 
@@ -22776,31 +22576,28 @@ msgid "Axis Lock"
 msgstr "Eixo"
 
 #: scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Linear X"
-msgstr "Linear"
+msgstr "X Linear"
 
 #: scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Linear Y"
-msgstr "Linear"
+msgstr "Y Linear"
 
 #: scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Linear Z"
-msgstr "Linear"
+msgstr "Z Linear"
 
 #: scene/3d/physics_body.cpp
 msgid "Angular X"
-msgstr ""
+msgstr "X Angular"
 
 #: scene/3d/physics_body.cpp
 msgid "Angular Y"
-msgstr ""
+msgstr "Y Angular"
 
 #: scene/3d/physics_body.cpp
 msgid "Angular Z"
-msgstr ""
+msgstr "Z Angular"
 
 #: scene/3d/physics_body.cpp
 #, fuzzy
@@ -22841,9 +22638,8 @@ msgid "Relaxation"
 msgstr "Relaxamento"
 
 #: scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Angular Limit Enabled"
-msgstr "Filtrar sinais"
+msgstr "Limite Angular Habilitado"
 
 #: scene/3d/physics_body.cpp
 #, fuzzy
@@ -22918,9 +22714,8 @@ msgid "Z"
 msgstr "Z"
 
 #: scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Linear Limit Enabled"
-msgstr "Linear"
+msgstr "Limite Linear Habilitado"
 
 #: scene/3d/physics_body.cpp
 #, fuzzy
@@ -22938,9 +22733,8 @@ msgid "Linear Spring Damping"
 msgstr "Linear"
 
 #: scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Linear Equilibrium Point"
-msgstr "Linear"
+msgstr "Ponto de Equilíbrio Linear"
 
 #: scene/3d/physics_body.cpp
 #, fuzzy
@@ -22964,7 +22758,7 @@ msgstr "Animação"
 
 #: scene/3d/physics_body.cpp scene/3d/physics_joint.cpp
 msgid "ERP"
-msgstr ""
+msgstr "ERP"
 
 #: scene/3d/physics_body.cpp
 #, fuzzy
@@ -22981,7 +22775,7 @@ msgstr ""
 
 #: scene/3d/physics_body.cpp
 msgid "Angular Equilibrium Point"
-msgstr ""
+msgstr "Ponto de Equilíbrio Angular"
 
 #: scene/3d/physics_body.cpp
 msgid "Body Offset"
@@ -22989,11 +22783,11 @@ msgstr "Deslocamento do Corpo"
 
 #: scene/3d/physics_joint.cpp
 msgid "Node A and Node B must be PhysicsBodies"
-msgstr "Nó A e Nó B devem ser PhysicsBodys"
+msgstr "Nó A e Nó B devem ser PhysicsBodies"
 
 #: scene/3d/physics_joint.cpp
 msgid "Node A must be a PhysicsBody"
-msgstr "Nó A deve ser PhysicsBody"
+msgstr "Nó A deve ser um PhysicsBody"
 
 #: scene/3d/physics_joint.cpp
 msgid "Node B must be a PhysicsBody"
@@ -23005,14 +22799,13 @@ msgstr "A junta não está conectada a nenhum PhysicsBody"
 
 #: scene/3d/physics_joint.cpp
 msgid "Node A and Node B must be different PhysicsBodies"
-msgstr "Nó A e Nó B devem ser diferente PhysicsBodies"
+msgstr "Nó A e Nó B devem ser diferentes PhysicsBodies"
 
 #: scene/3d/physics_joint.cpp
 msgid "Solver"
 msgstr ""
 
 #: scene/3d/physics_joint.cpp
-#, fuzzy
 msgid "Exclude Nodes"
 msgstr "Excluir Nós"
 
@@ -23022,7 +22815,7 @@ msgstr "Parâmetros"
 
 #: scene/3d/physics_joint.cpp
 msgid "Angular Limit"
-msgstr ""
+msgstr "Limite Angular"
 
 #: scene/3d/physics_joint.cpp
 #, fuzzy
@@ -23048,9 +22841,8 @@ msgid "Max Impulse"
 msgstr "Impulso Máximo"
 
 #: scene/3d/physics_joint.cpp
-#, fuzzy
 msgid "Linear Limit"
-msgstr "Linear"
+msgstr "Limite Linear"
 
 #: scene/3d/physics_joint.cpp
 msgid "Upper Distance"
@@ -23115,7 +22907,7 @@ msgstr "Linear"
 
 #: scene/3d/physics_joint.cpp
 msgid "Equilibrium Point"
-msgstr ""
+msgstr "Ponto de Equilíbrio"
 
 #: scene/3d/physics_joint.cpp
 msgid "Angular Limit X"
@@ -23213,9 +23005,8 @@ msgid "Use Default Margin"
 msgstr "Padrão"
 
 #: scene/3d/proximity_group.cpp
-#, fuzzy
 msgid "Group Name"
-msgstr "Agrupado"
+msgstr "Nome do Grupo"
 
 #: scene/3d/proximity_group.cpp
 msgid "Dispatch Mode"
@@ -23249,19 +23040,16 @@ msgid "Box Projection"
 msgstr "Projeto"
 
 #: scene/3d/reflection_probe.cpp
-#, fuzzy
 msgid "Enable Shadows"
-msgstr "Ativar Snap"
+msgstr "Habilitar Sombras"
 
 #: scene/3d/reflection_probe.cpp
-#, fuzzy
 msgid "Ambient Color"
-msgstr "Escolher Cor"
+msgstr "Cor Ambiente"
 
 #: scene/3d/reflection_probe.cpp
-#, fuzzy
 msgid "Ambient Energy"
-msgstr "Cores de Emissão"
+msgstr "Energia Ambiente"
 
 #: scene/3d/reflection_probe.cpp
 #, fuzzy
@@ -23335,7 +23123,7 @@ msgstr ""
 
 #: scene/3d/room_manager.cpp
 msgid "There should only be one RoomManager in the SceneTree."
-msgstr "Só Deve existir um RoomManager na SceneTree."
+msgstr "Só deve existir um RoomManager na SceneTree."
 
 #: scene/3d/room_manager.cpp
 msgid "Main"
@@ -23345,32 +23133,28 @@ msgstr "Principal"
 #: scene/animation/animation_player.cpp scene/animation/animation_tree.cpp
 #: scene/animation/animation_tree_player.cpp
 #: servers/audio/effects/audio_effect_delay.cpp
-#, fuzzy
 msgid "Active"
-msgstr "Ação"
+msgstr "Ativo"
 
 #: scene/3d/room_manager.cpp
 msgid "Roomlist"
 msgstr ""
 
 #: scene/3d/room_manager.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "PVS"
-msgstr "FPS"
+msgstr "PVS"
 
 #: scene/3d/room_manager.cpp
-#, fuzzy
 msgid "PVS Mode"
-msgstr "Modo Panorâmico"
+msgstr "Modo PVS"
 
 #: scene/3d/room_manager.cpp
-#, fuzzy
 msgid "PVS Filename"
-msgstr "Arquivo ZIP"
+msgstr "Nome do Arquivo PVS"
 
 #: scene/3d/room_manager.cpp servers/visual_server.cpp
 msgid "Gameplay"
-msgstr ""
+msgstr "Jogabilidade"
 
 #: scene/3d/room_manager.cpp
 #, fuzzy
@@ -23378,19 +23162,16 @@ msgid "Gameplay Monitor"
 msgstr "Monitor"
 
 #: scene/3d/room_manager.cpp
-#, fuzzy
 msgid "Use Secondary PVS"
-msgstr "Usar Encaixe Escalar"
+msgstr "Usar PVS Secundário"
 
 #: scene/3d/room_manager.cpp
-#, fuzzy
 msgid "Merge Meshes"
-msgstr "Malha"
+msgstr "Mesclar Malhas"
 
 #: scene/3d/room_manager.cpp
-#, fuzzy
 msgid "Show Margins"
-msgstr "Mostrar Origem"
+msgstr "Mostrar Margens"
 
 #: scene/3d/room_manager.cpp
 #, fuzzy
@@ -23411,9 +23192,8 @@ msgid "Portal Depth Limit"
 msgstr ""
 
 #: scene/3d/room_manager.cpp
-#, fuzzy
 msgid "Default Portal Margin"
-msgstr "Definir Margem"
+msgstr "Margem Padrão de Portal"
 
 #: scene/3d/room_manager.cpp
 #, fuzzy
@@ -23499,9 +23279,8 @@ msgid "Spatial Attachment Path"
 msgstr ""
 
 #: scene/3d/soft_body.cpp
-#, fuzzy
 msgid "Physics Enabled"
-msgstr "Frame de Física %"
+msgstr "Física Ativada"
 
 #: scene/3d/soft_body.cpp
 #, fuzzy
@@ -23530,7 +23309,7 @@ msgstr ""
 
 #: scene/3d/soft_body.cpp
 msgid "Pressure Coefficient"
-msgstr ""
+msgstr "Coeficiente de Pressão"
 
 #: scene/3d/soft_body.cpp
 msgid "Damping Coefficient"
@@ -23559,18 +23338,16 @@ msgstr ""
 "Altere o tamanho em formas de colisão de crianças."
 
 #: scene/3d/spatial.cpp
-#, fuzzy
 msgid "Global Translation"
-msgstr "Manter Transformação Global"
+msgstr "Transformação Global"
 
 #: scene/3d/spatial.cpp
 msgid "Matrix"
 msgstr "Matriz"
 
 #: scene/3d/spatial.cpp
-#, fuzzy
 msgid "Gizmo"
-msgstr "Gizmos"
+msgstr "Gizmo"
 
 #: scene/3d/spatial_velocity_tracker.cpp
 #, fuzzy
@@ -23611,13 +23388,12 @@ msgid "Per-Wheel Motion"
 msgstr "Roda para Baixo"
 
 #: scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Engine Force"
-msgstr "Documentação Online"
+msgstr "Força do Motor"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Brake"
-msgstr ""
+msgstr "Freio"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Steering"
@@ -23649,9 +23425,8 @@ msgid "Friction Slip"
 msgstr "Funções"
 
 #: scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Suspension"
-msgstr "Expressão"
+msgstr "Suspensão"
 
 #: scene/3d/vehicle_body.cpp
 #, fuzzy
@@ -23660,12 +23435,11 @@ msgstr "Erro"
 
 #: scene/3d/visibility_notifier.cpp
 msgid "AABB"
-msgstr ""
+msgstr "AABB"
 
 #: scene/3d/visual_instance.cpp scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Geometry"
-msgstr "Tentar Novamente"
+msgstr "Geometria"
 
 #: scene/3d/visual_instance.cpp
 #, fuzzy
@@ -23701,7 +23475,7 @@ msgstr ""
 
 #: scene/3d/visual_instance.cpp
 msgid "LOD"
-msgstr ""
+msgstr "LOD (Nível de Detalhe)"
 
 #: scene/3d/visual_instance.cpp scene/animation/skeleton_ik.cpp
 #: scene/resources/material.cpp
@@ -24455,7 +24229,7 @@ msgstr "Carregar como Substituto"
 
 #: scene/gui/line_edit.cpp
 msgid "Alpha"
-msgstr ""
+msgstr "Alfa"
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
 msgid "Caret"
@@ -24629,7 +24403,7 @@ msgstr "Caractere"
 
 #: scene/gui/rich_text_label.cpp
 msgid "BBCode"
-msgstr ""
+msgstr "BBCode"
 
 #: scene/gui/rich_text_label.cpp
 msgid "Meta Underlined"
@@ -25008,7 +24782,7 @@ msgstr "Separador Nomeado"
 
 #: scene/main/node.cpp
 msgid "Name Casing"
-msgstr ""
+msgstr "Capitalização do Nome"
 
 #: scene/main/node.cpp
 #, fuzzy
@@ -25021,9 +24795,8 @@ msgid "Pause Mode"
 msgstr "Modo Panorâmico"
 
 #: scene/main/node.cpp
-#, fuzzy
 msgid "Physics Interpolation Mode"
-msgstr "Modo de Interpolação"
+msgstr "Modo de Interpolação da Física"
 
 #: scene/main/node.cpp
 #, fuzzy
@@ -25091,7 +24864,7 @@ msgstr "Formas"
 
 #: scene/main/scene_tree.cpp
 msgid "Shape Color"
-msgstr ""
+msgstr "Cor da Forma"
 
 #: scene/main/scene_tree.cpp
 #, fuzzy
@@ -25100,7 +24873,7 @@ msgstr "Escolher Cor"
 
 #: scene/main/scene_tree.cpp
 msgid "Geometry Color"
-msgstr ""
+msgstr "Cor da Geometria"
 
 #: scene/main/scene_tree.cpp
 #, fuzzy
@@ -25149,9 +24922,8 @@ msgid "Use 32 BPC Depth"
 msgstr ""
 
 #: scene/main/scene_tree.cpp
-#, fuzzy
 msgid "Default Environment"
-msgstr "Visualizar Ambiente"
+msgstr "Ambiente Padrão"
 
 #: scene/main/scene_tree.cpp
 msgid ""
@@ -25227,9 +24999,8 @@ msgid "World 2D"
 msgstr "Mundo 2D"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Transparent BG"
-msgstr "Transpor"
+msgstr "Fundo Transparente"
 
 #: scene/main/viewport.cpp
 #, fuzzy
@@ -25256,7 +25027,6 @@ msgid "Keep 3D Linear"
 msgstr "Linear Esquerda"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Render Direct To Screen"
 msgstr "Renderizar Diretamente para a Tela"
 
@@ -25573,7 +25343,7 @@ msgstr "Cena Principal"
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
 msgid "BG"
-msgstr "B"
+msgstr "Plano de Fundo"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "FG"
@@ -25834,7 +25604,7 @@ msgstr "Selecionar"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Cursor Unfocused"
-msgstr ""
+msgstr "Cursor Desfocado"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25954,7 +25724,7 @@ msgstr "Guia 1"
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
 msgid "Tab BG"
-msgstr "Guia 1"
+msgstr "Plano de Fundo da Aba"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26062,9 +25832,8 @@ msgid "Color Sample"
 msgstr "Cores"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Preset BG"
-msgstr "Predefinição"
+msgstr "Fundo Predefinido"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Overbright Indicator"
@@ -26076,9 +25845,8 @@ msgid "Preset FG"
 msgstr "Predefinição"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Preset BG Icon"
-msgstr "Predefinição"
+msgstr "Ícone de Fundo Predefinido"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26231,7 +25999,7 @@ msgstr "Com Dados"
 
 #: scene/resources/environment.cpp
 msgid "Background"
-msgstr ""
+msgstr "Plano de Fundo"
 
 #: scene/resources/environment.cpp scene/resources/sky.cpp
 msgid "Sky"
@@ -26583,7 +26351,7 @@ msgstr ""
 
 #: scene/resources/material.cpp
 msgid "Do Not Receive Shadows"
-msgstr ""
+msgstr "Não Receber Sombras"
 
 #: scene/resources/material.cpp
 #, fuzzy
@@ -26843,7 +26611,7 @@ msgstr "Instância"
 
 #: scene/resources/multimesh.cpp
 msgid "Visible Instance Count"
-msgstr ""
+msgstr "Quantidade de Instâncias Visíveis"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Sampling"
@@ -26903,7 +26671,7 @@ msgstr "Erro"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Verts Per Poly"
-msgstr ""
+msgstr "Vértices Por Polígono"
 
 #: scene/resources/navigation_mesh.cpp
 #, fuzzy
@@ -26943,7 +26711,7 @@ msgstr "Deslocamento Base"
 
 #: scene/resources/occluder_shape.cpp
 msgid "Spheres"
-msgstr ""
+msgstr "Esferas"
 
 #: scene/resources/occluder_shape.cpp
 msgid "OccluderShapeSphere Set Spheres"
@@ -27390,11 +27158,11 @@ msgstr "Margem de Ligação da Borda"
 
 #: scene/resources/world_2d.cpp
 msgid "Canvas"
-msgstr ""
+msgstr "Canvas"
 
 #: servers/arvr/arvr_interface.cpp
 msgid "Is Primary"
-msgstr ""
+msgstr "É Principal"
 
 #: servers/arvr/arvr_interface.cpp
 #, fuzzy
@@ -27431,7 +27199,7 @@ msgstr ""
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 msgid "Voice Count"
-msgstr ""
+msgstr "Quantidade de Vozes"
 
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_delay.cpp
@@ -27610,9 +27378,8 @@ msgid "Enable Audio Input"
 msgstr "Renomear Canal de Áudio"
 
 #: servers/audio_server.cpp
-#, fuzzy
 msgid "Output Latency"
-msgstr "Saída"
+msgstr "Latência de Saída"
 
 #: servers/audio_server.cpp
 msgid "Channel Disable Threshold dB"
@@ -27661,7 +27428,7 @@ msgstr ""
 
 #: servers/physics/space_sw.cpp servers/physics_2d/space_2d_sw.cpp
 msgid "Time Before Sleep"
-msgstr ""
+msgstr "Tempo Antes de Dormir"
 
 #: servers/physics_2d/physics_2d_server_sw.cpp
 msgid "BP Hash Table Size"
@@ -27673,12 +27440,11 @@ msgstr ""
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Inverse Mass"
-msgstr ""
+msgstr "Inverter Massa"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Inverse Inertia"
-msgstr "Visão Livre na Esquerda"
+msgstr "Inverter Inércia"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Total Angular Damp"
@@ -27701,7 +27467,7 @@ msgstr "Inicializar"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Exclude"
-msgstr ""
+msgstr "Excluir"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Shape RID"
@@ -27714,7 +27480,7 @@ msgstr "Modo Colisão"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Collide With Areas"
-msgstr ""
+msgstr "Colidir com Áreas"
 
 #: servers/physics_2d_server.cpp servers/physics_server.cpp
 msgid "Motion Remainder"
@@ -27834,7 +27600,7 @@ msgstr "Importar Tema"
 
 #: servers/visual_server.cpp
 msgid "Lossless Compression"
-msgstr ""
+msgstr "Compressão Sem Perda"
 
 #: servers/visual_server.cpp
 #, fuzzy
@@ -27843,7 +27609,7 @@ msgstr "Forçar Push"
 
 #: servers/visual_server.cpp
 msgid "WebP Compression Level"
-msgstr ""
+msgstr "Nível de Compressão WebP"
 
 #: servers/visual_server.cpp
 msgid "Time Rollover Secs"
@@ -27887,7 +27653,7 @@ msgstr "Seleção Central"
 
 #: servers/visual_server.cpp
 msgid "High Quality GGX"
-msgstr ""
+msgstr "GGX de Alta Qualidade"
 
 #: servers/visual_server.cpp
 msgid "Irradiance Max Size"
@@ -28034,7 +27800,7 @@ msgstr "Colar Frame"
 
 #: servers/visual_server.cpp
 msgid "GLES2"
-msgstr ""
+msgstr "GLES2"
 
 #: servers/visual_server.cpp
 msgid "Compatibility"
@@ -28056,11 +27822,11 @@ msgstr "Expressão"
 
 #: servers/visual_server.cpp
 msgid "UV Contract"
-msgstr ""
+msgstr "Contrato UV"
 
 #: servers/visual_server.cpp
 msgid "UV Contract Amount"
-msgstr ""
+msgstr "Valor do Contrato UV"
 
 #: servers/visual_server.cpp
 #, fuzzy
@@ -28093,7 +27859,7 @@ msgstr "Ver Ocultação Pela Oclusão"
 
 #: servers/visual_server.cpp
 msgid "Max Active Spheres"
-msgstr ""
+msgstr "Máximo de Esferas Ativas"
 
 #: servers/visual_server.cpp
 #, fuzzy
@@ -28107,13 +27873,12 @@ msgstr "Modo de Interpolação"
 
 #: servers/visual_server.cpp
 msgid "Max Simultaneous Compiles"
-msgstr ""
+msgstr "Compilações Simultâneas Máximas"
 
 #: servers/visual_server.cpp
 msgid "Log Active Async Compiles Count"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Shader Cache Size (MB)"
-msgstr "Alterar Tamanho da Câmera"
+msgstr "Tamanho do Cache de Shader (MB)"
diff --git a/editor/translations/ro.po b/editor/translations/ro.po
index a78712c6ba..0dc49c7dba 100644
--- a/editor/translations/ro.po
+++ b/editor/translations/ro.po
@@ -4608,6 +4608,7 @@ msgstr "Proiect Divers sau unelte pentru scenă."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Proiect"
 
@@ -7508,7 +7509,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15712,18 +15714,18 @@ msgstr ""
 msgid "Make Local"
 msgstr "Creează Oase"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Nume Nod:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Nume Nod:"
 
 #: editor/scene_tree_dock.cpp
@@ -15930,6 +15932,11 @@ msgstr "Adaugă în Grup"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Nume Nod:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Eroare de Conexiune"
 
@@ -15993,6 +16000,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17921,6 +17932,21 @@ msgstr "Toată selecția"
 msgid "Auto Update Project"
 msgstr "Exportă Proiectul"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Afișează Tot"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Alegeţi un Director"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Alegeţi un Director"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19752,6 +19778,11 @@ msgstr "Creează Nod"
 msgid "Custom BG Color"
 msgstr "Creează Nod"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Extinde Toate"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20600,6 +20631,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Nume nevalid."
diff --git a/editor/translations/ru.po b/editor/translations/ru.po
index 1df1d87308..b79923abf1 100644
--- a/editor/translations/ru.po
+++ b/editor/translations/ru.po
@@ -78,7 +78,7 @@
 # Alex Tern <ternvein@gmail.com>, 2020.
 # Varion Drakon Neonovich <variondrakon@gmail.com>, 2020.
 # d2cyb <dmitrydpb@gmail.com>, 2020.
-# Алексей Смирнов <tir74@mail.ru>, 2020.
+# Алексей Смирнов <tir74@mail.ru>, 2020, 2022.
 # Calamander <Calamander@yandex.ru>, 2020.
 # Terminator <fresh-ter@yandex.com>, 2020.
 # Anatoly Kuznetsov <muffinnorth@yandex.ru>, 2020.
@@ -119,13 +119,18 @@
 # Vadim Mitroshkin <Vadim7540@yandex.ru>, 2022.
 # Maksim Marchukov <mar.maksim63@gmail.com>, 2022.
 # Slava Beloglazov <slavathedeveloper@gmail.com>, 2022.
+# Sned Of Bread <d.cto20181389@gmail.com>, 2022.
+# Kedr <lava20121991@gmail.com>, 2022.
+# Gulpy <yak.aryslan.1999@gmail.com>, 2022.
+# Sergey Karmanov <ppoocpel8888@gmail.com>, 2022.
+# Дмитрий <Dimega@inbox.ru>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-26 01:55+0000\n"
-"Last-Translator: NeoLan Qu <it.bulla@mail.ru>\n"
+"PO-Revision-Date: 2022-09-01 15:11+0000\n"
+"Last-Translator: Дмитрий <Dimega@inbox.ru>\n"
 "Language-Team: Russian <https://hosted.weblate.org/projects/godot-engine/"
 "godot/ru/>\n"
 "Language: ru\n"
@@ -134,7 +139,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
 "n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -506,9 +511,8 @@ msgid "Command"
 msgstr "Command"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr "(Физическая)"
+msgstr "Физический"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
@@ -764,14 +768,12 @@ msgid "Script Templates Search Path"
 msgstr "Путь поиска шаблонов скриптов"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Autoload On Startup"
-msgstr "Автозагрузка при запуске"
+msgstr "Автозагрузка системы управления версиями при запуске"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Plugin Name"
-msgstr "Контроль версий"
+msgstr "Название плагина контроля версий"
 
 #: core/project_settings.cpp scene/2d/collision_object_2d.cpp
 #: scene/3d/collision_object.cpp scene/gui/control.cpp
@@ -2852,7 +2854,6 @@ msgid "Project export for platform:"
 msgstr "Экспорт проекта для платформы:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
 msgstr "Завершено с ошибками."
 
@@ -2861,9 +2862,8 @@ msgid "Completed successfully."
 msgstr "Завершено без ошибок."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed."
-msgstr "Не удалось:"
+msgstr "Ошибка."
 
 #: editor/editor_export.cpp
 msgid "Storing File:"
@@ -2882,24 +2882,20 @@ msgid "Save PCK"
 msgstr "Сохранить PCK"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Cannot create file \"%s\"."
-msgstr "Невозможно создать папку."
+msgstr "Невозможно создать файл \"%s\"."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to export project files."
-msgstr "Не удалось экспортировать файлы проекта"
+msgstr "Не удалось экспортировать файлы проекта."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Can't open file to read from path \"%s\"."
-msgstr "Невозможно открыть файл для записи:"
+msgstr "Не удается открыть файл для чтения из пути \"%s\"."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save ZIP"
-msgstr "Сохранить как"
+msgstr "Сохранить ZIP"
 
 #: editor/editor_export.cpp
 msgid ""
@@ -3019,30 +3015,25 @@ msgid "Custom release template not found."
 msgstr "Пользовательский релизный шаблон не найден."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Prepare Template"
-msgstr "Управление шаблонами"
+msgstr "Подготовить шаблон"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "The given export path doesn't exist."
-msgstr "Данный путь экспорта не существует:"
+msgstr "Указанный путь экспорта не существует."
 
 #: editor/editor_export.cpp platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Template file not found: \"%s\"."
-msgstr "Файл шаблона не найден:"
+msgstr "Не найден файл шаблона: \"%s\"."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to copy export template."
-msgstr "Неверный шаблон экспорта:"
+msgstr "Не удалось скопировать шаблон экспорта."
 
 #: editor/editor_export.cpp platform/windows/export/export.cpp
 #: platform/x11/export/export.cpp
-#, fuzzy
 msgid "PCK Embedding"
-msgstr "Отступ"
+msgstr "Встраивание PCK"
 
 #: editor/editor_export.cpp
 msgid "On 32-bit exports the embedded PCK cannot be bigger than 4 GiB."
@@ -4594,6 +4585,7 @@ msgstr "Прочие инструменты."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Проект"
 
@@ -5311,9 +5303,8 @@ msgstr ""
 "существующий пресет как активный."
 
 #: editor/editor_run_native.cpp
-#, fuzzy
 msgid "Project Run"
-msgstr "Проект"
+msgstr "Запуск проекта"
 
 #: editor/editor_run_script.cpp
 msgid "Write your logic in the _run() method."
@@ -5596,13 +5587,12 @@ msgid "Mouse Extra Buttons Navigate History"
 msgstr "Навигация по истории дополнительными кнопками мыши"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Drag And Drop Selection"
-msgstr "Выделение сетки"
+msgstr "DragAndDrop выделение"
 
 #: editor/editor_settings.cpp
 msgid "Stay In Script Editor On Node Selected"
-msgstr ""
+msgstr "Остаться в Редакторе Скриптов На Выбранном Узле"
 
 #: editor/editor_settings.cpp
 msgid "Appearance"
@@ -7366,7 +7356,8 @@ msgid "8 Bit"
 msgstr "8-бит"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Моно"
 
@@ -11599,9 +11590,8 @@ msgid "Invalid geometry, can't replace by mesh."
 msgstr "Недопустимая геометрия, не может быть заменена полисеткой."
 
 #: editor/plugins/sprite_editor_plugin.cpp
-#, fuzzy
 msgid "Convert to MeshInstance2D"
-msgstr "Преобразовать в Mesh2D"
+msgstr "Преобразование в MeshInstance2D"
 
 #: editor/plugins/sprite_editor_plugin.cpp
 msgid "Invalid geometry, can't create polygon."
@@ -11707,7 +11697,7 @@ msgstr "Новая анимация"
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 #, fuzzy
 msgid "Filter animations"
-msgstr "Фильтр методов"
+msgstr "Фильтровать анимации"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Speed:"
@@ -14231,12 +14221,10 @@ msgid "Export All"
 msgstr "Экспортировать всё"
 
 #: editor/project_export.cpp
-#, fuzzy
 msgid "Choose an export mode:"
-msgstr "Пожалуйста, выберите пустую папку."
+msgstr "Пожалуйста, выберите режим экспорта:"
 
 #: editor/project_export.cpp
-#, fuzzy
 msgid "Export All..."
 msgstr "Экспортировать всё"
 
@@ -14393,7 +14381,7 @@ msgstr "Отрисовщик:"
 
 #: editor/project_manager.cpp
 msgid "OpenGL ES 3.0"
-msgstr "ОткрытыйGL ES 3.0"
+msgstr "OpenGL ES 3.0"
 
 #: editor/project_manager.cpp
 msgid "Not supported by your GPU drivers."
@@ -14413,7 +14401,7 @@ msgstr ""
 
 #: editor/project_manager.cpp
 msgid "OpenGL ES 2.0"
-msgstr "ОткрытыйGL ES 2.0"
+msgstr "OpenGL ES 2.0"
 
 #: editor/project_manager.cpp
 msgid ""
@@ -15370,16 +15358,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Сделать локальным"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr "Данное уникальное имя уже использовано у другого узла в сцене."
-
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
 msgstr "Добавить уникальное имя сцене"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Unique names already used by another node in the scene:"
+msgstr "Данное уникальное имя уже использовано у другого узла в сцене."
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Убрать уникальное имя в сцене"
 
 #: editor/scene_tree_dock.cpp
@@ -15580,6 +15571,10 @@ msgid "Button Group"
 msgstr "Группа кнопок"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "Убрать уникальное имя в сцене"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Источник)"
 
@@ -15657,6 +15652,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Некорректное имя узла, следующие символы недопустимы:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "Данное уникальное имя уже использовано у другого узла в сцене."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Переименовать узел"
 
@@ -17051,12 +17050,12 @@ msgstr "Узел кости Godot"
 #: modules/gltf/gltf_skin.cpp
 #, fuzzy
 msgid "Skin Root"
-msgstr "Новый корень сцены"
+msgstr "Корневой скин"
 
 #: modules/gltf/gltf_skin.cpp
 #, fuzzy
 msgid "Joints Original"
-msgstr "Сфокусироваться на начале координат"
+msgstr "Суставы Оригинал"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Inverse Binds"
@@ -17065,7 +17064,7 @@ msgstr "Инвертировать Связи"
 #: modules/gltf/gltf_skin.cpp
 #, fuzzy
 msgid "Non Joints"
-msgstr "Передвинуть сустав"
+msgstr "Не Суставы"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Joint I To Bone I"
@@ -17098,7 +17097,7 @@ msgstr "Зеркальный коэффициент"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Spec Gloss Img"
-msgstr ""
+msgstr "Зеркальное Глянцевое Изображение"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Json"
@@ -17115,16 +17114,16 @@ msgstr "Младшая версия"
 #: modules/gltf/gltf_state.cpp
 #, fuzzy
 msgid "GLB Data"
-msgstr "С данными"
+msgstr "GLB Данные"
 
 #: modules/gltf/gltf_state.cpp
+#, fuzzy
 msgid "Use Named Skin Binds"
-msgstr ""
+msgstr "Использовать Связи Именованного Скина"
 
 #: modules/gltf/gltf_state.cpp
-#, fuzzy
 msgid "Buffer Views"
-msgstr "Вид сзади"
+msgstr "Буфер видов"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Accessors"
@@ -17389,23 +17388,23 @@ msgstr "Построение карт освещения"
 #: modules/lightmapper_cpu/register_types.cpp
 #, fuzzy
 msgid "CPU Lightmapper"
-msgstr "Запекать карты освещения"
+msgstr "CPU Карты освещения"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Low Quality Ray Count"
-msgstr ""
+msgstr "Количество Лучей Низкого Качества"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Medium Quality Ray Count"
-msgstr ""
+msgstr "Количество Лучей Среднего Качества"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "High Quality Ray Count"
-msgstr ""
+msgstr "Количество Лучей Высокого Качества"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Ultra Quality Ray Count"
-msgstr ""
+msgstr "Количество Лучей Ультра Качества"
 
 #: modules/minimp3/audio_stream_mp3.cpp
 #: modules/minimp3/resource_importer_mp3.cpp
@@ -17420,7 +17419,7 @@ msgstr "Высота глаз"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "IOD"
-msgstr ""
+msgstr "IOD"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 #, fuzzy
@@ -17434,15 +17433,15 @@ msgstr "Режим без теней"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "Oversample"
-msgstr ""
+msgstr "Передискретизация"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "K1"
-msgstr ""
+msgstr "K1"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "K2"
-msgstr ""
+msgstr "K2"
 
 #: modules/mono/csharp_script.cpp
 msgid "Class name can't be a reserved keyword"
@@ -17456,6 +17455,21 @@ msgstr "Собрать решение"
 msgid "Auto Update Project"
 msgstr "Автообновление проекта"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Масштаб отображения"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Выбрать каталог"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Выбрать каталог"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Конец трассировки внутреннего стека исключений"
@@ -17536,7 +17550,7 @@ msgstr "Как карта нормалей"
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "Bump Strength"
-msgstr ""
+msgstr "Сила Bump"
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "Noise"
@@ -17562,7 +17576,7 @@ msgstr "Перспективный"
 
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Lacunarity"
-msgstr ""
+msgstr "Лакунарность"
 
 #: modules/regex/regex.cpp
 msgid "Subject"
@@ -17578,7 +17592,7 @@ msgstr "Строки"
 
 #: modules/upnp/upnp.cpp
 msgid "Discover Multicast If"
-msgstr ""
+msgstr "Обнаружить Многоадресную Рассылку, Если"
 
 #: modules/upnp/upnp.cpp
 msgid "Discover Local Port"
@@ -17586,7 +17600,7 @@ msgstr "Обнаружить локальный порт"
 
 #: modules/upnp/upnp.cpp
 msgid "Discover IPv6"
-msgstr ""
+msgstr "Обнаружить IPv6"
 
 #: modules/upnp/upnp_device.cpp
 msgid "Description URL"
@@ -17598,7 +17612,7 @@ msgstr "Тип сервиса"
 
 #: modules/upnp/upnp_device.cpp
 msgid "IGD Control URL"
-msgstr ""
+msgstr "IDG Контроль URL"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
@@ -17607,7 +17621,7 @@ msgstr "Установить тип переменной"
 
 #: modules/upnp/upnp_device.cpp
 msgid "IGD Our Addr"
-msgstr ""
+msgstr "IGD Наш Адр"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
@@ -18413,12 +18427,14 @@ msgid "Optional Features"
 msgstr "Дополнительные Компоненты"
 
 #: modules/webxr/webxr_interface.cpp
+#, fuzzy
 msgid "Requested Reference Space Types"
-msgstr ""
+msgstr "Запрошенные Типы Опорного Пространства"
 
 #: modules/webxr/webxr_interface.cpp
+#, fuzzy
 msgid "Reference Space Type"
-msgstr ""
+msgstr "Тип Опорного Пространства"
 
 #: modules/webxr/webxr_interface.cpp
 msgid "Visibility State"
@@ -18443,12 +18459,14 @@ msgid "Debug Keystore"
 msgstr "Отладочное хранилище ключей"
 
 #: platform/android/export/export.cpp
+#, fuzzy
 msgid "Debug Keystore User"
-msgstr ""
+msgstr "Отладочное Хранилище ключей Пользователя"
 
 #: platform/android/export/export.cpp
+#, fuzzy
 msgid "Debug Keystore Pass"
-msgstr ""
+msgstr "Отладочное Хранилище ключей Паролей"
 
 #: platform/android/export/export.cpp
 msgid "Force System User"
@@ -18590,9 +18608,8 @@ msgid "Graphics"
 msgstr "Смещение графа"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "OpenGL Debug"
-msgstr "Открыть"
+msgstr "OpenGL Отладка"
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -18950,11 +18967,9 @@ msgstr ""
 "%s. Пожалуйста, переустановите шаблон сборки Android из меню «Проект»."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid ""
 "Unable to overwrite res://android/build/res/*.xml files with project name."
-msgstr ""
-"Невозможно перезаписать файлы res://android/build/res/*.xml с именем проекта"
+msgstr "Невозможно перезаписать res://android/build/res/*.xml с именем проекта"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Could not export project files to gradle project."
@@ -18990,9 +19005,8 @@ msgstr ""
 "проекта gradle на наличие выходных данных."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Package not found: \"%s\"."
-msgstr "Пакет не найден: %s"
+msgstr "Пакет не найден: \"%s\"."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Creating APK..."
@@ -19017,9 +19031,8 @@ msgid "Adding files..."
 msgstr "Добавление файлов..."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Could not export project files."
-msgstr "Не удалось экспортировать файлы проекта"
+msgstr "Не удалось экспортировать файлы проекта."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Aligning APK..."
@@ -19257,6 +19270,11 @@ msgstr "Пользовательский цвет"
 msgid "Custom BG Color"
 msgstr "Пользовательский цвет"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Развернуть все"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19289,19 +19307,16 @@ msgid "Run exported HTML in the system's default browser."
 msgstr "Запустить HTML в системном браузере по умолчанию."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not open template for export: \"%s\"."
-msgstr "Не удалось открыть шаблон для экспорта:"
+msgstr "Не удалось открыть шаблон для экспорта: \"%s\"."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Invalid export template: \"%s\"."
-msgstr "Неверный шаблон экспорта:"
+msgstr "Неверный шаблон экспорта: \"%s\"."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not write file: \"%s\"."
-msgstr "Не удалось записать файл:"
+msgstr "Не удалось записать файл: \"%s\"."
 
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
 #, fuzzy
@@ -19309,9 +19324,8 @@ msgid "Icon Creation"
 msgstr "Задать отступ"
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not read file: \"%s\"."
-msgstr "Не удалось прочитать файл:"
+msgstr "Не удалось прочитать файл: \"%s\"."
 
 #: platform/javascript/export/export.cpp
 msgid "PWA"
@@ -19392,14 +19406,12 @@ msgid "Icon 512 X 512"
 msgstr ""
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not read HTML shell: \"%s\"."
-msgstr "Не удалось прочитать HTML-оболочку:"
+msgstr "Не удалось прочитать HTML-оболочку: \"%s\"."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not create HTTP server directory: %s."
-msgstr "Не удалось создать каталог HTTP-сервера:"
+msgstr "Не удалось создать каталог HTTP-сервера: %s."
 
 #: platform/javascript/export/export.cpp
 #, fuzzy
@@ -20144,6 +20156,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Недопустимое короткое имя пакета."
 
@@ -26223,9 +26241,8 @@ msgid "Camera Feed ID"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Ambient Light"
-msgstr "Отступ вправо"
+msgstr "Рассеянный свет"
 
 #: scene/resources/environment.cpp
 #, fuzzy
@@ -26458,7 +26475,7 @@ msgstr ""
 
 #: scene/resources/environment.cpp
 msgid "Adjustments"
-msgstr ""
+msgstr "Adjustments (настройки)"
 
 #: scene/resources/environment.cpp
 #, fuzzy
@@ -27900,7 +27917,7 @@ msgstr "Режим интерполяции"
 
 #: servers/visual_server.cpp
 msgid "OpenGL"
-msgstr "ОткрытыйGL"
+msgstr "OpenGL"
 
 #: servers/visual_server.cpp
 msgid "Batching Send Null"
@@ -27990,8 +28007,9 @@ msgid "Precision"
 msgstr "Точность"
 
 #: servers/visual_server.cpp
+#, fuzzy
 msgid "UV Contract"
-msgstr ""
+msgstr "UV Контракт"
 
 #: servers/visual_server.cpp
 msgid "UV Contract Amount"
@@ -28017,7 +28035,7 @@ msgstr "Удалить тайл"
 #: servers/visual_server.cpp
 #, fuzzy
 msgid "Flip Imported Portals"
-msgstr "Перевернуть порталы"
+msgstr "Перевернуть Импортированные Порталы"
 
 #: servers/visual_server.cpp
 #, fuzzy
diff --git a/editor/translations/si.po b/editor/translations/si.po
index 8ce2d1d628..5e99894cf1 100644
--- a/editor/translations/si.po
+++ b/editor/translations/si.po
@@ -4394,6 +4394,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7117,7 +7118,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14891,18 +14893,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "සජීවීකරණ පුනරාවර්ථනය"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "සජීවීකරණ පුනරාවර්ථනය"
 
 #: editor/scene_tree_dock.cpp
@@ -15094,6 +15096,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "සජීවීකරණ පුනරාවර්ථනය"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15157,6 +15164,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16975,6 +16986,19 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "මෙම ලුහුබදින්නා ඉවත් කරන්න."
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "නිවේශන මාදිලිය"
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18700,6 +18724,11 @@ msgstr "යතුරු පිටපත් කරන්න"
 msgid "Custom BG Color"
 msgstr "යතුරු පිටපත් කරන්න"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Anim පරිවර්තනය වෙනස් කරන්න"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19496,6 +19525,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/sk.po b/editor/translations/sk.po
index 7cba3886ba..ebd2256728 100644
--- a/editor/translations/sk.po
+++ b/editor/translations/sk.po
@@ -4623,6 +4623,7 @@ msgstr "Zmiešanosti projektových alebo scénových wide tool-ov."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -7541,7 +7542,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15643,18 +15645,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Meno Node-u:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Meno Node-u:"
 
 #: editor/scene_tree_dock.cpp
@@ -15855,6 +15857,11 @@ msgid "Button Group"
 msgstr "Tlačidlo"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Meno Node-u:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Pripájanie z)"
 
@@ -15919,6 +15926,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17845,6 +17856,21 @@ msgstr "Všetky vybrané"
 msgid "Auto Update Project"
 msgstr "Projekt"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Zobraziť Všetko"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Vyberte adresár"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Vyberte adresár"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19676,6 +19702,11 @@ msgstr "Vložiť"
 msgid "Custom BG Color"
 msgstr "Vložiť"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Expandovať Všetky"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20524,6 +20555,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Nesprávna veľkosť písma."
diff --git a/editor/translations/sl.po b/editor/translations/sl.po
index ceb21aa750..f0e227266d 100644
--- a/editor/translations/sl.po
+++ b/editor/translations/sl.po
@@ -12,15 +12,15 @@
 # Arnold Marko <arnold.marko@gmail.com>, 2019.
 # Alex <alexrixhardson@gmail.com>, 2019.
 # Andrew Poženel <andrej.pozenel@outlook.com>, 2020, 2022.
-# Jakob Tadej Vrtačnik <minecraftalka2@gmail.com>, 2021.
+# Jakob Tadej Vrtačnik <minecraftalka2@gmail.com>, 2021, 2022.
 # Andrew Poženel <andrew.pozenel@protonmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-06-23 16:41+0000\n"
-"Last-Translator: Andrew Poženel <andrew.pozenel@protonmail.com>\n"
+"PO-Revision-Date: 2022-08-12 17:08+0000\n"
+"Last-Translator: Jakob Tadej Vrtačnik <minecraftalka2@gmail.com>\n"
 "Language-Team: Slovenian <https://hosted.weblate.org/projects/godot-engine/"
 "godot/sl/>\n"
 "Language: sl\n"
@@ -29,7 +29,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=4; plural=n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || "
 "n%100==4 ? 2 : 3;\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -320,9 +320,8 @@ msgid "Not enough bytes for decoding bytes, or invalid format."
 msgstr "Ni dovolj bajtov za dekodiranje, ali pa je neveljaven format."
 
 #: core/math/expression.cpp
-#, fuzzy
 msgid "Invalid input %d (not passed) in expression"
-msgstr "Napačen vnos %i(ni podan) v izrazu"
+msgstr "Napačen vnos %d (ni podan) v izrazu"
 
 #: core/math/expression.cpp
 msgid "self can't be used because instance is null (not passed)"
@@ -351,70 +350,63 @@ msgstr "Na klic '%s':"
 #: core/math/random_number_generator.cpp
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Seed"
-msgstr ""
+msgstr "Seme"
 
 #: core/math/random_number_generator.cpp
-#, fuzzy
 msgid "State"
-msgstr "Način Vrtenja"
+msgstr "Stanje"
 
 #: core/message_queue.cpp
 msgid "Message Queue"
-msgstr ""
+msgstr "Vrsta sporočil"
 
 #: core/message_queue.cpp
 msgid "Max Size (KB)"
-msgstr ""
+msgstr "Največja velikost (KB)"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Mouse Mode"
-msgstr "Način Premika"
+msgstr "Način kazalca"
 
 #: core/os/input.cpp
-#, fuzzy
 msgid "Use Accumulated Input"
-msgstr "Izbriši Vnos"
+msgstr "Uporabi zbran vnos"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: servers/audio_server.cpp
 msgid "Device"
-msgstr ""
+msgstr "Naprava"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Alt"
-msgstr "Vse"
+msgstr "Alt"
 
 #: core/os/input_event.cpp
 msgid "Shift"
-msgstr ""
+msgstr "Shift"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Control"
-msgstr "Različica:"
+msgstr "Control"
 
 #: core/os/input_event.cpp
 msgid "Meta"
 msgstr ""
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Command"
-msgstr "Skupnost"
+msgstr "Ukaz"
 
 #: core/os/input_event.cpp
 #, fuzzy
 msgid "Physical"
-msgstr "Fizikalni Okvir %"
+msgstr "Fizikalno"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Pressed"
-msgstr "Prednastavitev..."
+msgstr "Pritisnjeno"
 
 #: core/os/input_event.cpp
 msgid "Scancode"
@@ -430,98 +422,87 @@ msgstr "Unicode"
 
 #: core/os/input_event.cpp
 msgid "Echo"
-msgstr ""
+msgstr "Odmev"
 
 #: core/os/input_event.cpp scene/gui/base_button.cpp
 #, fuzzy
 msgid "Button Mask"
-msgstr "Dodaj v Skupino"
+msgstr "Maska gumba"
 
 #: core/os/input_event.cpp scene/2d/node_2d.cpp scene/gui/control.cpp
-#, fuzzy
 msgid "Global Position"
-msgstr "Konstanta"
+msgstr "Globalna pozicija"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Factor"
-msgstr "Nadzornik"
+msgstr "Faktor"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Button Index"
-msgstr "Način Plošče"
+msgstr "Kazalo gumba"
 
 #: core/os/input_event.cpp
 msgid "Doubleclick"
-msgstr ""
+msgstr "Dvojni klik"
 
 #: core/os/input_event.cpp
 msgid "Tilt"
-msgstr ""
+msgstr "Nagib"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Pressure"
-msgstr "Prednastavitev..."
+msgstr "Pritisk"
 
 #: core/os/input_event.cpp
 msgid "Pen Inverted"
-msgstr ""
+msgstr "Obrnjeno pero"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Relative"
-msgstr "Pripni Relativno"
+msgstr "Relativno"
 
 #: core/os/input_event.cpp scene/2d/camera_2d.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/interpolated_camera.cpp
 #: scene/animation/animation_player.cpp scene/resources/environment.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Speed"
-msgstr "Prilagodi Velikost:"
+msgstr "Hitrost"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: scene/3d/sprite_3d.cpp
 msgid "Axis"
-msgstr ""
+msgstr "Os"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Axis Value"
-msgstr "Novo ime:"
+msgstr "Vrednost osi"
 
 #: core/os/input_event.cpp modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Index"
-msgstr "Način Plošče"
+msgstr "Kazalo"
 
 #: core/os/input_event.cpp editor/project_settings_editor.cpp
 #: modules/visual_script/visual_script_nodes.cpp
 #: scene/2d/touch_screen_button.cpp
-#, fuzzy
 msgid "Action"
-msgstr "Premakni Dejanje"
+msgstr "Akcija"
 
 #: core/os/input_event.cpp scene/resources/environment.cpp
 #: scene/resources/material.cpp
 msgid "Strength"
-msgstr ""
+msgstr "Moč"
 
 #: core/os/input_event.cpp
 msgid "Delta"
 msgstr ""
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Channel"
-msgstr "Spremeni"
+msgstr "Kanal"
 
 #: core/os/input_event.cpp main/main.cpp
-#, fuzzy
 msgid "Message"
-msgstr "Usklajuj Spremembe Skript"
+msgstr "Sporočilo"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -532,11 +513,11 @@ msgstr "Prilagodi Velikost:"
 #: scene/2d/physics_body_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/3d/physics_body.cpp scene/resources/particles_material.cpp
 msgid "Velocity"
-msgstr ""
+msgstr "Hitrost"
 
 #: core/os/input_event.cpp
 msgid "Instrument"
-msgstr ""
+msgstr "Inštrument"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -550,19 +531,16 @@ msgstr ""
 #: core/project_settings.cpp editor/editor_node.cpp main/main.cpp
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Application"
-msgstr "Premakni Dejanje"
+msgstr "Aplikacija"
 
 #: core/project_settings.cpp main/main.cpp
-#, fuzzy
 msgid "Config"
-msgstr "Nastavi Zaskok"
+msgstr "Konfiguracija"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Project Settings Override"
-msgstr "Nastavitve Projekta"
+msgstr "Preglasi nastavitve projekta"
 
 #: core/project_settings.cpp core/resource.cpp
 #: editor/animation_track_editor.cpp editor/editor_autoload_settings.cpp
@@ -580,9 +558,8 @@ msgstr "Ime"
 #: core/project_settings.cpp editor/editor_help.cpp
 #: modules/visual_script/visual_script_nodes.cpp platform/uwp/export/export.cpp
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Description"
-msgstr "Opis:"
+msgstr "Opis"
 
 #: core/project_settings.cpp editor/editor_node.cpp editor/editor_settings.cpp
 #: editor/plugins/script_editor_plugin.cpp editor/project_manager.cpp
@@ -594,42 +571,42 @@ msgstr "Zaženi"
 #: core/project_settings.cpp editor/editor_node.cpp
 #: editor/run_settings_dialog.cpp main/main.cpp
 msgid "Main Scene"
-msgstr ""
+msgstr "Glavna scena"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Disable stdout"
-msgstr "Onemogočen"
+msgstr "Onemogoči stdout"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Disable stderr"
-msgstr "Onemogočen"
+msgstr "Onemogoči stderr"
 
 #: core/project_settings.cpp
 msgid "Use Hidden Project Data Directory"
-msgstr ""
+msgstr "Uporabi imenik skritih podatkov projekta"
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "Use Custom User Dir"
-msgstr ""
+msgstr "Uporabi posebno uporabniško (režijo?)"
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "Custom User Dir Name"
-msgstr ""
+msgstr "Posebno uporabniško ime (režije?)"
 
 #: core/project_settings.cpp main/main.cpp
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
 #: platform/uwp/os_uwp.cpp
 #, fuzzy
 msgid "Display"
-msgstr "Zamenjaj Vse"
+msgstr "Zaslon(glagol ali samostalnik?)"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/opensimplex/noise_texture.cpp scene/2d/line_2d.cpp
 #: scene/3d/label_3d.cpp scene/gui/text_edit.cpp scene/resources/texture.cpp
 msgid "Width"
-msgstr ""
+msgstr "Širina"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/gltf/gltf_node.cpp modules/opensimplex/noise_texture.cpp
@@ -638,21 +615,19 @@ msgstr ""
 #: scene/resources/font.cpp scene/resources/navigation_mesh.cpp
 #: scene/resources/primitive_meshes.cpp scene/resources/texture.cpp
 msgid "Height"
-msgstr ""
+msgstr "Višina"
 
 #: core/project_settings.cpp
 msgid "Always On Top"
-msgstr ""
+msgstr "Vedno na vrhu"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Test Width"
-msgstr "Linearno"
+msgstr "Testiraj širino"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Test Height"
-msgstr "Preskušanje"
+msgstr "Testiraj višino"
 
 #: core/project_settings.cpp editor/animation_track_editor.cpp
 #: editor/editor_audio_buses.cpp main/main.cpp servers/audio_server.cpp
@@ -662,7 +637,7 @@ msgstr "Zvok"
 #: core/project_settings.cpp
 #, fuzzy
 msgid "Default Bus Layout"
-msgstr "Naloži prevezeto Postavitev Vodila."
+msgstr "Privzeta postavitev (?)"
 
 #: core/project_settings.cpp editor/editor_export.cpp
 #: editor/editor_file_system.cpp editor/editor_node.cpp
@@ -673,95 +648,84 @@ msgstr "Urejevalnik"
 
 #: core/project_settings.cpp
 msgid "Main Run Args"
-msgstr ""
+msgstr "Glavni zagonski argumenti"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Scene Naming"
-msgstr "Pot Prizora:"
+msgstr "Imenovanje scene"
 
 #: core/project_settings.cpp
 msgid "Search In File Extensions"
-msgstr ""
+msgstr "Išči v razširitvah datotek"
 
 #: core/project_settings.cpp
 msgid "Script Templates Search Path"
-msgstr ""
+msgstr "Pot iskanja predlogov skript"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Autoload On Startup"
-msgstr "Različica:"
+msgstr "Samodejno nalaganje nadzora različic ob zagonu"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Plugin Name"
-msgstr "Različica:"
+msgstr "Ime vtičnika za nadzor različic"
 
 #: core/project_settings.cpp scene/2d/collision_object_2d.cpp
 #: scene/3d/collision_object.cpp scene/gui/control.cpp
-#, fuzzy
 msgid "Input"
-msgstr "Dodaj Vnos"
+msgstr "Vnos"
 
 #: core/project_settings.cpp
 msgid "UI Accept"
-msgstr ""
+msgstr "UI Sprejmi"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Select"
-msgstr "Izberi"
+msgstr "UI Izberi"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Cancel"
-msgstr "Prekliči"
+msgstr "UI Prekini"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Focus Next"
-msgstr "Poudari Pot"
+msgstr "UI Osredotoči naslednje"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Focus Prev"
-msgstr "Poudari Pot"
+msgstr "UI Osredotoči prejšnje"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Left"
-msgstr "Način Vrtenja"
+msgstr "UI Levo"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Right"
-msgstr "Način Vrtenja"
+msgstr "UI Desno"
 
 #: core/project_settings.cpp
 msgid "UI Up"
-msgstr ""
+msgstr "UI Gor"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Down"
-msgstr "Prenesi"
+msgstr "UI Dol"
 
 #: core/project_settings.cpp
 msgid "UI Page Up"
-msgstr ""
+msgstr "UI Page Up"
 
 #: core/project_settings.cpp
 msgid "UI Page Down"
-msgstr ""
+msgstr "UI Page Down"
 
 #: core/project_settings.cpp
 msgid "UI Home"
-msgstr ""
+msgstr "UI Home"
 
 #: core/project_settings.cpp
 msgid "UI End"
-msgstr ""
+msgstr "UI End"
 
 #: core/project_settings.cpp main/main.cpp modules/bullet/register_types.cpp
 #: modules/bullet/space_bullet.cpp scene/2d/physics_body_2d.cpp
@@ -773,7 +737,7 @@ msgstr ""
 #: servers/physics_server.cpp
 #, fuzzy
 msgid "Physics"
-msgstr "Fizikalni Okvir %"
+msgstr "Fizika"
 
 #: core/project_settings.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -783,11 +747,11 @@ msgstr "Fizikalni Okvir %"
 #: scene/3d/physics_body.cpp scene/resources/world.cpp
 #: servers/physics/space_sw.cpp servers/physics_server.cpp
 msgid "3D"
-msgstr ""
+msgstr "3D"
 
 #: core/project_settings.cpp
 msgid "Smooth Trimesh Collision"
-msgstr ""
+msgstr "Gladko trimeško trčenje"
 
 #: core/project_settings.cpp drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles2/rasterizer_scene_gles2.cpp
@@ -799,7 +763,7 @@ msgstr ""
 #: scene/main/viewport.cpp servers/visual/visual_server_scene.cpp
 #: servers/visual_server.cpp
 msgid "Rendering"
-msgstr ""
+msgstr "Upodabljanje"
 
 #: core/project_settings.cpp drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_scene_gles3.cpp
@@ -809,18 +773,17 @@ msgstr ""
 #: scene/resources/multimesh.cpp servers/visual/visual_server_scene.cpp
 #: servers/visual_server.cpp
 msgid "Quality"
-msgstr ""
+msgstr "Kakovost"
 
 #: core/project_settings.cpp scene/gui/file_dialog.cpp
 #: scene/main/scene_tree.cpp scene/resources/navigation_mesh.cpp
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Filters"
-msgstr "Filtri..."
+msgstr "Filtri"
 
 #: core/project_settings.cpp scene/main/viewport.cpp
 msgid "Sharpen Intensity"
-msgstr ""
+msgstr "Izostri intenzivnost"
 
 #: core/project_settings.cpp editor/editor_export.cpp editor/editor_node.cpp
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
@@ -836,28 +799,27 @@ msgstr "Razhroščevalnik"
 
 #: core/project_settings.cpp main/main.cpp modules/gdscript/gdscript.cpp
 #: modules/visual_script/visual_script.cpp scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Settings"
-msgstr "Nastavitve Zaskočenja"
+msgstr "Nastavitve"
 
 #: core/project_settings.cpp editor/script_editor_debugger.cpp main/main.cpp
 #: modules/mono/mono_gd/gd_mono.cpp
+#, fuzzy
 msgid "Profiler"
-msgstr ""
+msgstr "Zabeležnik(?)"
 
 #: core/project_settings.cpp
 #, fuzzy
 msgid "Max Functions"
-msgstr "Preimenuj Funkcijo"
+msgstr "Največja količina funkcij"
 
 #: core/project_settings.cpp scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Compression"
-msgstr "Trenutna Različica:"
+msgstr "Kompresija"
 
 #: core/project_settings.cpp
 msgid "Formats"
-msgstr ""
+msgstr "Formati"
 
 #: core/project_settings.cpp
 msgid "Zstd"
@@ -869,11 +831,12 @@ msgstr ""
 
 #: core/project_settings.cpp
 msgid "Compression Level"
-msgstr ""
+msgstr "Nivo kompresije"
 
 #: core/project_settings.cpp
+#, fuzzy
 msgid "Window Log Size"
-msgstr ""
+msgstr "Velikost beležnega okna"
 
 #: core/project_settings.cpp
 msgid "Zlib"
@@ -885,20 +848,19 @@ msgstr ""
 
 #: core/project_settings.cpp platform/android/export/export.cpp
 msgid "Android"
-msgstr ""
+msgstr "Android"
 
 #: core/project_settings.cpp
 msgid "Modules"
-msgstr ""
+msgstr "Moduli"
 
 #: core/register_core_types.cpp
 msgid "TCP"
 msgstr "TCP"
 
 #: core/register_core_types.cpp
-#, fuzzy
 msgid "Connect Timeout Seconds"
-msgstr "Poveži se z Gradnikom:"
+msgstr "Časovna omejitev povezave v sekundah"
 
 #: core/register_core_types.cpp
 msgid "Packet Peer Stream"
@@ -906,16 +868,15 @@ msgstr ""
 
 #: core/register_core_types.cpp
 msgid "Max Buffer (Power of 2)"
-msgstr ""
+msgstr "Največja količina medpomnilnikov (Večkratnik 2)"
 
 #: core/register_core_types.cpp editor/editor_settings.cpp main/main.cpp
 msgid "SSL"
 msgstr ""
 
 #: core/register_core_types.cpp main/main.cpp
-#, fuzzy
 msgid "Certificates"
-msgstr "Lastnosti"
+msgstr "Certifikati"
 
 #: core/resource.cpp editor/dependency_editor.cpp
 #: editor/editor_resource_picker.cpp
@@ -924,9 +885,8 @@ msgid "Resource"
 msgstr "Viri"
 
 #: core/resource.cpp
-#, fuzzy
 msgid "Local To Scene"
-msgstr "Zapri Prizor"
+msgstr "Lokalno tej sceni"
 
 #: core/resource.cpp editor/dependency_editor.cpp
 #: editor/editor_autoload_settings.cpp editor/plugins/path_editor_plugin.cpp
@@ -936,18 +896,16 @@ msgid "Path"
 msgstr "Pot"
 
 #: core/script_language.cpp
-#, fuzzy
 msgid "Source Code"
-msgstr "Viri"
+msgstr "Izvirna koda"
 
 #: core/translation.cpp editor/project_settings_editor.cpp
 msgid "Locale"
 msgstr ""
 
 #: core/translation.cpp
-#, fuzzy
 msgid "Test"
-msgstr "Preskušanje"
+msgstr "Test"
 
 #: core/translation.cpp scene/resources/font.cpp
 msgid "Fallback"
@@ -987,17 +945,17 @@ msgstr "EiB"
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 #: drivers/gles3/rasterizer_storage_gles3.cpp modules/gltf/gltf_state.cpp
 msgid "Buffers"
-msgstr ""
+msgstr "Predpomnilnik"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
 msgid "Canvas Polygon Buffer Size (KB)"
-msgstr ""
+msgstr "Platno mnogotnik predpomnilnik velikost (KB)"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
 msgid "Canvas Polygon Index Buffer Size (KB)"
-msgstr ""
+msgstr "Platno mnogokotnik kazalo predpomnilnik velikost (KB)"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp editor/editor_settings.cpp
@@ -1009,13 +967,12 @@ msgstr ""
 #: servers/physics_2d/space_2d_sw.cpp servers/physics_2d_server.cpp
 #: servers/visual_server.cpp
 msgid "2D"
-msgstr ""
+msgstr "2D"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
-#, fuzzy
 msgid "Snapping"
-msgstr "Pametno pripenjanje"
+msgstr "Pripenjanje"
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
@@ -1026,7 +983,7 @@ msgstr "Uporabi Pripenjanje Pikslov"
 #: drivers/gles2/rasterizer_scene_gles2.cpp
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Immediate Buffer Size (KB)"
-msgstr ""
+msgstr "Takojšnja velikost predpomnilnika (KB)"
 
 #: drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_storage_gles3.cpp
@@ -1036,29 +993,30 @@ msgstr "Zapeči Svetlobne karte"
 
 #: drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_storage_gles3.cpp
+#, fuzzy
 msgid "Use Bicubic Sampling"
-msgstr ""
+msgstr "Uporabite bikubično vzorčenje"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Max Renderable Elements"
-msgstr ""
+msgstr "Največ upodobljivih elementov"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Max Renderable Lights"
-msgstr ""
+msgstr "Največ upodobljivih luči"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
-#, fuzzy
 msgid "Max Renderable Reflections"
-msgstr "GridMap Izbriši Izbor"
+msgstr "Največ upodobljivih refleksij"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Max Lights Per Object"
-msgstr ""
+msgstr "Največ luči na objekt"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
+#, fuzzy
 msgid "Subsurface Scattering"
-msgstr ""
+msgstr "Podpovršinsko razprševanje"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp editor/animation_track_editor.cpp
 #: editor/import/resource_importer_texture.cpp
@@ -1070,29 +1028,30 @@ msgstr ""
 #: scene/animation/animation_blend_tree.cpp scene/gui/control.cpp
 #: scene/main/canvas_layer.cpp scene/resources/environment.cpp
 #: scene/resources/material.cpp scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Scale"
-msgstr "Prilagodi Velikost:"
+msgstr "Velikost"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Follow Surface"
-msgstr ""
+msgstr "Sledi površini"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Weight Samples"
-msgstr ""
+msgstr "Vzorci teže"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
+#, fuzzy
 msgid "Voxel Cone Tracing"
-msgstr ""
+msgstr "Sledenje (voxel?) stožca"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp scene/resources/environment.cpp
 msgid "High Quality"
-msgstr ""
+msgstr "Visoka kakovost"
 
 #: drivers/gles3/rasterizer_storage_gles3.cpp
+#, fuzzy
 msgid "Blend Shape Max Buffer Size (KB)"
-msgstr ""
+msgstr "Mešanica oblike največja velikost predpomnilnika (KB)"
 
 #. TRANSLATORS: Adjective, refers to the mode for Bezier handles (Free, Balanced, Mirror).
 #: editor/animation_bezier_editor.cpp
@@ -1166,9 +1125,8 @@ msgstr "Animacija Spremeni klic"
 #: editor/animation_track_editor.cpp scene/2d/animated_sprite.cpp
 #: scene/2d/sprite.cpp scene/3d/sprite_3d.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Frame"
-msgstr "Okvir %"
+msgstr "Okvir"
 
 #: editor/animation_track_editor.cpp editor/editor_profiler.cpp
 #: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
@@ -1179,38 +1137,35 @@ msgstr "Čas"
 
 #: editor/animation_track_editor.cpp editor/import/resource_importer_scene.cpp
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Location"
-msgstr "Rotacijski Korak:"
+msgstr "Lokacija"
 
 #: editor/animation_track_editor.cpp modules/gltf/gltf_node.cpp
 #: scene/2d/polygon_2d.cpp scene/2d/remote_transform_2d.cpp
 #: scene/3d/remote_transform.cpp scene/3d/spatial.cpp scene/gui/control.cpp
-#, fuzzy
 msgid "Rotation"
-msgstr "Rotacijski Korak:"
+msgstr "Rotacija"
 
 #: editor/animation_track_editor.cpp editor/script_editor_debugger.cpp
 #: modules/visual_script/visual_script_nodes.cpp scene/gui/range.cpp
 msgid "Value"
-msgstr ""
+msgstr "Vrednost"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Arg Count"
-msgstr "Količina:"
+msgstr "Količina argumentov"
 
 #: editor/animation_track_editor.cpp main/main.cpp
 #: modules/mono/mono_gd/gd_mono.cpp
 msgid "Args"
-msgstr ""
+msgstr "Argumenti"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
 #: editor/script_editor_debugger.cpp modules/gltf/gltf_accessor.cpp
 #: modules/gltf/gltf_light.cpp modules/visual_script/visual_script_nodes.cpp
 #: scene/3d/physics_body.cpp scene/resources/visual_shader_nodes.cpp
 msgid "Type"
-msgstr ""
+msgstr "Način"
 
 #: editor/animation_track_editor.cpp
 msgid "In Handle"
@@ -1225,17 +1180,15 @@ msgstr ""
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 #: scene/audio/audio_stream_player.cpp scene/gui/video_player.cpp
 msgid "Stream"
-msgstr ""
+msgstr "Tok"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Start Offset"
-msgstr "Mrežni Zamik:"
+msgstr "Začetni odmik"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "End Offset"
-msgstr "Mrežni Zamik:"
+msgstr "Končni odmik"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_scene.cpp
@@ -1249,7 +1202,7 @@ msgstr "Animacija"
 
 #: editor/animation_track_editor.cpp
 msgid "Easing"
-msgstr ""
+msgstr "Popuščanje"
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
@@ -1313,7 +1266,7 @@ msgstr "Ustavi predvajanje animacije. (S)"
 #: editor/animation_track_editor.cpp
 #, fuzzy
 msgid "Animation length (frames)"
-msgstr "Dolžina animacije (v sekundah)."
+msgstr "Dolžina animacije (v slikah?)."
 
 #: editor/animation_track_editor.cpp
 #, fuzzy
@@ -1326,9 +1279,8 @@ msgid "Add Track"
 msgstr "Animacija Dodaj sled"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Animation Looping"
-msgstr "Približaj animacijo."
+msgstr "Animacija v zanki"
 
 #: editor/animation_track_editor.cpp
 #: modules/visual_script/visual_script_editor.cpp
@@ -1337,7 +1289,7 @@ msgstr "Funkcije:"
 
 #: editor/animation_track_editor.cpp
 msgid "Audio Clips:"
-msgstr ""
+msgstr "Zvočni posnetki:"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Clips:"
@@ -4694,6 +4646,7 @@ msgstr "Različna projektna ali prizorska orodja."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -7627,7 +7580,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15903,18 +15857,19 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Ime Gradnika:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Ime že uporablja druga funkcija/sprem/signal:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Ime Gradnika:"
 
 #: editor/scene_tree_dock.cpp
@@ -16121,6 +16076,11 @@ msgstr "Dodaj v Skupino"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Ime Gradnika:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Napaka Pri Povezavi"
 
@@ -16185,6 +16145,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -18118,6 +18082,21 @@ msgstr "Celotna izbira"
 msgid "Auto Update Project"
 msgstr "Izvozi Projekt"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Zamenjaj Vse"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Izberi Mapo"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Izberi Mapo"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19970,6 +19949,11 @@ msgstr "Gradnik Prehod"
 msgid "Custom BG Color"
 msgstr "Gradnik Prehod"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Razširi vse"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20820,6 +20804,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Neveljavno ime."
diff --git a/editor/translations/sq.po b/editor/translations/sq.po
index af72b686b9..f8ffd0e88d 100644
--- a/editor/translations/sq.po
+++ b/editor/translations/sq.po
@@ -4632,6 +4632,7 @@ msgstr "Vegla të ndryshme për projektin ose skenën."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekti"
 
@@ -7527,7 +7528,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15491,18 +15493,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Emri i Nyjes:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Emri i Nyjes:"
 
 #: editor/scene_tree_dock.cpp
@@ -15699,6 +15701,11 @@ msgstr "Shto te Grupi"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Emri i Nyjes:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Gabim në Lidhje"
 
@@ -15763,6 +15770,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17644,6 +17655,21 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "Eksporto Projektin"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Shfaqi të Gjitha"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Zgjidh një Direktori"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Zgjidh një Direktori"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19455,6 +19481,11 @@ msgstr "Dyfisho Nyjet"
 msgid "Custom BG Color"
 msgstr "Dyfisho Nyjet"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Zgjero të Gjitha"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20297,6 +20328,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Emër i palejuar."
diff --git a/editor/translations/sr_Cyrl.po b/editor/translations/sr_Cyrl.po
index 4231d62c6b..f2f6a5bf09 100644
--- a/editor/translations/sr_Cyrl.po
+++ b/editor/translations/sr_Cyrl.po
@@ -4878,6 +4878,7 @@ msgstr "Разни алати за пројекат или сцену."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Пројекат"
 
@@ -7944,7 +7945,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -17014,18 +17016,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Направи кости"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Име чвора:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Име је већ у употреби у функ/пром/сигналу:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Име чвора:"
 
 #: editor/scene_tree_dock.cpp
@@ -17258,6 +17261,11 @@ msgstr "Група Дугмића"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Име чвора:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "(Повезивање од)"
 
@@ -17343,6 +17351,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Неважеће име чвора, следећи карактери нису дозвољени:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 #, fuzzy
 msgid "Rename Node"
 msgstr "Преименуј Чвор"
@@ -19420,6 +19432,21 @@ msgstr "Испуни одабрано"
 msgid "Auto Update Project"
 msgstr "Неименован Пројекат"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Прикажи нормалу"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Одабери директоријум"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Одабери директоријум"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 #, fuzzy
 msgid "End of inner exception stack trace"
@@ -21351,6 +21378,11 @@ msgstr "Направи чвор"
 msgid "Custom BG Color"
 msgstr "Направи чвор"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Прошири све"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -22211,6 +22243,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Неважеће кратко име паковања."
diff --git a/editor/translations/sr_Latn.po b/editor/translations/sr_Latn.po
index b898108402..8af5b1daaf 100644
--- a/editor/translations/sr_Latn.po
+++ b/editor/translations/sr_Latn.po
@@ -4411,6 +4411,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7151,7 +7152,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14924,18 +14926,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Obriši Selekciju"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Obriši Selekciju"
 
 #: editor/scene_tree_dock.cpp
@@ -15128,6 +15130,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Obriši Selekciju"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15191,6 +15198,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17031,6 +17042,19 @@ msgstr "Sve sekcije"
 msgid "Auto Update Project"
 msgstr "Izmjeni Selekciju Krivulje"
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Izmjeni Selekciju Krivulje"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18778,6 +18802,11 @@ msgstr "Animacija Uduplaj Ključeve"
 msgid "Custom BG Color"
 msgstr "Animacija Uduplaj Ključeve"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Homogenost Boje."
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19579,6 +19608,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/sv.po b/editor/translations/sv.po
index 9fd6b9bf67..44b6fcf8b6 100644
--- a/editor/translations/sv.po
+++ b/editor/translations/sv.po
@@ -32,8 +32,8 @@ msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-23 03:57+0000\n"
-"Last-Translator: Kenny Andersson <kenny@ordinary.se>\n"
+"PO-Revision-Date: 2022-08-30 03:11+0000\n"
+"Last-Translator: Björn Åkesson <bjorn.akesson@gmail.com>\n"
 "Language-Team: Swedish <https://hosted.weblate.org/projects/godot-engine/"
 "godot/sv/>\n"
 "Language: sv\n"
@@ -41,7 +41,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 #, fuzzy
@@ -49,9 +49,8 @@ msgid "Tablet Driver"
 msgstr "Drivrutin för surfplatta"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Clipboard"
-msgstr "Klippbordet är tomt!"
+msgstr "Urklipp"
 
 #: core/bind/core_bind.cpp
 msgid "Current Screen"
@@ -4662,6 +4661,7 @@ msgstr "Diverse projekt eller scenövergripande-verktyg."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Projekt"
 
@@ -7565,7 +7565,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15718,18 +15719,18 @@ msgstr ""
 msgid "Make Local"
 msgstr "Gör Patch"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Node Namn:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Node Namn:"
 
 #: editor/scene_tree_dock.cpp
@@ -15934,6 +15935,11 @@ msgstr "Lägg till i Grupp"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Node Namn:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Anslutningsfel"
 
@@ -15999,6 +16005,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Byt namn på Node"
 
@@ -17909,6 +17919,21 @@ msgstr "Alla urval"
 msgid "Auto Update Project"
 msgstr "Namnlöst Projekt"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Ersätt Alla"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Välj en Katalog"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Välj en Katalog"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19734,6 +19759,11 @@ msgstr "Klipp ut Noder"
 msgid "Custom BG Color"
 msgstr "Klipp ut Noder"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Expandera alla"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20583,6 +20613,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "Ogiltigt namn."
diff --git a/editor/translations/te.po b/editor/translations/te.po
index af4c65f062..fe9f95b213 100644
--- a/editor/translations/te.po
+++ b/editor/translations/te.po
@@ -4330,6 +4330,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7008,7 +7009,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -14677,16 +14679,16 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
+#: editor/scene_tree_dock.cpp
+msgid "Enable Scene Unique Name(s)"
 msgstr ""
 
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+msgid "Disable Scene Unique Name(s)"
 msgstr ""
 
 #: editor/scene_tree_dock.cpp
@@ -14876,6 +14878,10 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -14939,6 +14945,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -16723,6 +16733,18 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr ""
 
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Assembly Name"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "C# Project Directory"
+msgstr ""
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -18417,6 +18439,10 @@ msgstr ""
 msgid "Custom BG Color"
 msgstr ""
 
+#: platform/iphone/export/export.cpp
+msgid "Export Icons"
+msgstr ""
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19198,6 +19224,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/th.po b/editor/translations/th.po
index f1eb8b716f..6e4b0e578f 100644
--- a/editor/translations/th.po
+++ b/editor/translations/th.po
@@ -4623,6 +4623,7 @@ msgstr "โปรเจกต์และเครื่องมืออื่
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "โปรเจกต์"
 
@@ -7560,7 +7561,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15655,18 +15657,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "ทำให้เป็นภายใน"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "ชื่อโนด:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "มีฟังก์ชัน/ตัวแปร/สัญญาณอื่นใช้ชื่อนี้แล้ว:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "ชื่อโนด:"
 
 #: editor/scene_tree_dock.cpp
@@ -15862,6 +15865,11 @@ msgid "Button Group"
 msgstr "ชุดของปุ่ม"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "ชื่อโนด:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(เชื่อมต่อจาก)"
 
@@ -15937,6 +15945,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "ชื่อโหนดไม่ถูกต้อง ใช้ตัวอักษรต่อไปนี้ไม่ได้:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "เปลี่ยนชื่อโหนด"
 
@@ -17864,6 +17876,21 @@ msgstr "เติมส่วนที่เลือก"
 msgid "Auto Update Project"
 msgstr "โปรเจกต์ไม่มีชื่อ"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "แสดงทั้งหมด"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "เลือกโฟลเดอร์"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "เลือกโฟลเดอร์"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "สิ้นสุดสแตคข้อผิดพลาดภายใน"
@@ -19716,6 +19743,11 @@ msgstr "ตัดโหนด"
 msgid "Custom BG Color"
 msgstr "ตัดโหนด"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "ขยายออก"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20572,6 +20604,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "ชื่อแพ็คเกจแบบสั้นผิดพลาด"
 
diff --git a/editor/translations/tl.po b/editor/translations/tl.po
index fec7766383..bf39f11166 100644
--- a/editor/translations/tl.po
+++ b/editor/translations/tl.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-04-08 07:29+0000\n"
+"PO-Revision-Date: 2022-08-12 17:08+0000\n"
 "Last-Translator: Napstaguy04 <brokenscreen3@gmail.com>\n"
 "Language-Team: Tagalog <https://hosted.weblate.org/projects/godot-engine/"
 "godot/tl/>\n"
@@ -18,7 +18,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1 && n != 2 && n != 3 && (n % 10 == 4 "
 "|| n % 10 == 6 || n % 10 == 9);\n"
-"X-Generator: Weblate 4.12-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -523,30 +523,26 @@ msgid "Delta"
 msgstr ""
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Channel"
-msgstr "Baguhin"
+msgstr ""
 
 #: core/os/input_event.cpp main/main.cpp
-#, fuzzy
 msgid "Message"
-msgstr "I-commit Lahat ng Pagbabago"
+msgstr "Mensahe"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Pitch"
-msgstr "Switch"
+msgstr "Taas ng Tunog"
 
 #: core/os/input_event.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/physics_body_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/3d/physics_body.cpp scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Velocity"
-msgstr "Simulan"
+msgstr "Bilis"
 
 #: core/os/input_event.cpp
 msgid "Instrument"
-msgstr ""
+msgstr "Instrumento"
 
 #: core/os/input_event.cpp
 #, fuzzy
@@ -627,15 +623,14 @@ msgstr ""
 #: core/project_settings.cpp main/main.cpp
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
 #: platform/uwp/os_uwp.cpp
-#, fuzzy
 msgid "Display"
-msgstr "Ipakita Lahat"
+msgstr ""
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/opensimplex/noise_texture.cpp scene/2d/line_2d.cpp
 #: scene/3d/label_3d.cpp scene/gui/text_edit.cpp scene/resources/texture.cpp
 msgid "Width"
-msgstr ""
+msgstr "Lapad"
 
 #: core/project_settings.cpp main/main.cpp modules/csg/csg_shape.cpp
 #: modules/gltf/gltf_node.cpp modules/opensimplex/noise_texture.cpp
@@ -644,11 +639,11 @@ msgstr ""
 #: scene/resources/font.cpp scene/resources/navigation_mesh.cpp
 #: scene/resources/primitive_meshes.cpp scene/resources/texture.cpp
 msgid "Height"
-msgstr ""
+msgstr "Taas"
 
 #: core/project_settings.cpp
 msgid "Always On Top"
-msgstr ""
+msgstr "Parating Nasa Taas"
 
 #: core/project_settings.cpp
 msgid "Test Width"
@@ -742,30 +737,27 @@ msgstr "I-urong Pakanan"
 
 #: core/project_settings.cpp
 msgid "UI Up"
-msgstr ""
+msgstr "UI Taas"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Down"
-msgstr "Baba"
+msgstr "UI Baba"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI Page Up"
-msgstr "Pahina: "
+msgstr "UI Pahinang Taas"
 
 #: core/project_settings.cpp
 msgid "UI Page Down"
-msgstr ""
+msgstr "UI Pahinang Baba"
 
 #: core/project_settings.cpp
 msgid "UI Home"
-msgstr ""
+msgstr "UI Panimula"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "UI End"
-msgstr "Sa Huli"
+msgstr "UI Wakas"
 
 #: core/project_settings.cpp main/main.cpp modules/bullet/register_types.cpp
 #: modules/bullet/space_bullet.cpp scene/2d/physics_body_2d.cpp
@@ -776,7 +768,7 @@ msgstr "Sa Huli"
 #: servers/physics_2d/space_2d_sw.cpp servers/physics_2d_server.cpp
 #: servers/physics_server.cpp
 msgid "Physics"
-msgstr ""
+msgstr "Pisika"
 
 #: core/project_settings.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -786,7 +778,7 @@ msgstr ""
 #: scene/3d/physics_body.cpp scene/resources/world.cpp
 #: servers/physics/space_sw.cpp servers/physics_server.cpp
 msgid "3D"
-msgstr ""
+msgstr "3D"
 
 #: core/project_settings.cpp
 msgid "Smooth Trimesh Collision"
@@ -802,7 +794,7 @@ msgstr ""
 #: scene/main/viewport.cpp servers/visual/visual_server_scene.cpp
 #: servers/visual_server.cpp
 msgid "Rendering"
-msgstr ""
+msgstr "Pagre-render"
 
 #: core/project_settings.cpp drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_scene_gles3.cpp
@@ -812,18 +804,17 @@ msgstr ""
 #: scene/resources/multimesh.cpp servers/visual/visual_server_scene.cpp
 #: servers/visual_server.cpp
 msgid "Quality"
-msgstr ""
+msgstr "Kalidad"
 
 #: core/project_settings.cpp scene/gui/file_dialog.cpp
 #: scene/main/scene_tree.cpp scene/resources/navigation_mesh.cpp
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Filters"
-msgstr "Salain ang mga node"
+msgstr "Mga Pansala"
 
 #: core/project_settings.cpp scene/main/viewport.cpp
 msgid "Sharpen Intensity"
-msgstr ""
+msgstr "Tindi ng Pagkatulis"
 
 #: core/project_settings.cpp editor/editor_export.cpp editor/editor_node.cpp
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
@@ -839,9 +830,8 @@ msgstr "Debug"
 
 #: core/project_settings.cpp main/main.cpp modules/gdscript/gdscript.cpp
 #: modules/visual_script/visual_script.cpp scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Settings"
-msgstr "Kaayusan:"
+msgstr "Pagsasaayos:"
 
 #: core/project_settings.cpp editor/script_editor_debugger.cpp main/main.cpp
 #: modules/mono/mono_gd/gd_mono.cpp
@@ -849,18 +839,16 @@ msgid "Profiler"
 msgstr ""
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Max Functions"
-msgstr "Gumawa ng Punsyon"
+msgstr "Max na Punksyon"
 
 #: core/project_settings.cpp scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Compression"
-msgstr "Ekspresyon"
+msgstr "Kompresyon"
 
 #: core/project_settings.cpp
 msgid "Formats"
-msgstr ""
+msgstr "Mga Format"
 
 #: core/project_settings.cpp
 msgid "Zstd"
@@ -868,15 +856,15 @@ msgstr ""
 
 #: core/project_settings.cpp
 msgid "Long Distance Matching"
-msgstr ""
+msgstr "Pagtugma sa Mahabang Layo"
 
 #: core/project_settings.cpp
 msgid "Compression Level"
-msgstr ""
+msgstr "Tindi ng Kompresyon"
 
 #: core/project_settings.cpp
 msgid "Window Log Size"
-msgstr ""
+msgstr "Laki ng Log ng Window"
 
 #: core/project_settings.cpp
 msgid "Zlib"
@@ -892,16 +880,15 @@ msgstr ""
 
 #: core/project_settings.cpp
 msgid "Modules"
-msgstr ""
+msgstr "Mga Modyul"
 
 #: core/register_core_types.cpp
 msgid "TCP"
 msgstr ""
 
 #: core/register_core_types.cpp
-#, fuzzy
 msgid "Connect Timeout Seconds"
-msgstr "Ikabit sa Node:"
+msgstr ""
 
 #: core/register_core_types.cpp
 msgid "Packet Peer Stream"
@@ -917,7 +904,7 @@ msgstr ""
 
 #: core/register_core_types.cpp main/main.cpp
 msgid "Certificates"
-msgstr ""
+msgstr "Mga Katibayan"
 
 #: core/resource.cpp editor/dependency_editor.cpp
 #: editor/editor_resource_picker.cpp
@@ -926,9 +913,8 @@ msgid "Resource"
 msgstr ""
 
 #: core/resource.cpp
-#, fuzzy
 msgid "Local To Scene"
-msgstr "Isara ang Eksena"
+msgstr "Lokal sa Eksena"
 
 #: core/resource.cpp editor/dependency_editor.cpp
 #: editor/editor_autoload_settings.cpp editor/plugins/path_editor_plugin.cpp
@@ -943,7 +929,7 @@ msgstr ""
 
 #: core/translation.cpp editor/project_settings_editor.cpp
 msgid "Locale"
-msgstr ""
+msgstr "Wika"
 
 #: core/translation.cpp
 #, fuzzy
@@ -1019,9 +1005,8 @@ msgstr ""
 
 #: drivers/gles2/rasterizer_canvas_base_gles2.cpp
 #: drivers/gles3/rasterizer_canvas_base_gles3.cpp
-#, fuzzy
 msgid "Use GPU Pixel Snap"
-msgstr "Paguurong na Pa-pixel"
+msgstr "Gamiting ang GPU Paguurong na Pa-pixel"
 
 #: drivers/gles2/rasterizer_scene_gles2.cpp
 #: drivers/gles3/rasterizer_scene_gles3.cpp
@@ -1070,11 +1055,11 @@ msgstr ""
 #: scene/main/canvas_layer.cpp scene/resources/environment.cpp
 #: scene/resources/material.cpp scene/resources/particles_material.cpp
 msgid "Scale"
-msgstr ""
+msgstr "Iskala"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Follow Surface"
-msgstr ""
+msgstr "Sundan ang Ibabaw"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Weight Samples"
@@ -1086,7 +1071,7 @@ msgstr ""
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp scene/resources/environment.cpp
 msgid "High Quality"
-msgstr ""
+msgstr "Mataas na Kalidad"
 
 #: drivers/gles3/rasterizer_storage_gles3.cpp
 msgid "Blend Shape Max Buffer Size (KB)"
@@ -1095,7 +1080,7 @@ msgstr ""
 #. TRANSLATORS: Adjective, refers to the mode for Bezier handles (Free, Balanced, Mirror).
 #: editor/animation_bezier_editor.cpp
 msgid "Free"
-msgstr "Walang Bayad"
+msgstr "Malaya"
 
 #: editor/animation_bezier_editor.cpp
 msgid "Balanced"
@@ -4497,6 +4482,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Proyekto"
 
@@ -7300,7 +7286,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -11524,27 +11511,27 @@ msgstr "Sariwain ang Preview"
 
 #: editor/plugins/sprite_editor_plugin.cpp
 msgid "Settings:"
-msgstr "Kaayusan:"
+msgstr "Pagsasaayos:"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "No Frames Selected"
-msgstr ""
+msgstr "Walang Pinipiling Frames"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Add %d Frame(s)"
-msgstr ""
+msgstr "Magdagdag ng %d Frame(s)"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Add Frame"
-msgstr ""
+msgstr "Magdagdag ng Frame"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Unable to load images"
-msgstr ""
+msgstr "Hindi mai-karga ang mga larawan"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "ERROR: Couldn't load frame resource!"
-msgstr ""
+msgstr "ERROR: Hindi mai-karga ang frame resource!"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Resource clipboard is empty or not a texture!"
@@ -11560,7 +11547,7 @@ msgstr "Magdagdag ng Puwang"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Change Animation FPS"
-msgstr ""
+msgstr "Palitan ang FPS ng Animation"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "(empty)"
@@ -11579,9 +11566,8 @@ msgid "New Animation"
 msgstr ""
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
-#, fuzzy
 msgid "Filter animations"
-msgstr "Salain ang mga method"
+msgstr "Salain ang mga animation"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Speed:"
@@ -11630,16 +11616,16 @@ msgstr ""
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Horizontal:"
-msgstr ""
+msgstr "Pahalang:"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Vertical:"
-msgstr ""
+msgstr "Patayo:"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 #: editor/plugins/texture_region_editor_plugin.cpp
 msgid "Separation:"
-msgstr ""
+msgstr "Pagkakahiwalay:"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 #: editor/plugins/texture_region_editor_plugin.cpp
@@ -11668,7 +11654,7 @@ msgstr ""
 
 #: editor/plugins/texture_region_editor_plugin.cpp
 msgid "Snap Mode:"
-msgstr "Paraan ng Paguurong:"
+msgstr "Paraan ng Pag-uurong:"
 
 #: editor/plugins/texture_region_editor_plugin.cpp
 msgid "Pixel Snap"
@@ -11716,15 +11702,15 @@ msgstr ""
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "No fonts found."
-msgstr ""
+msgstr "Walang font na mahanap."
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "{num} icon(s)"
-msgstr ""
+msgstr "(mga) {num} icon"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "No icons found."
-msgstr ""
+msgstr "Walang icon na mahanap."
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "{num} stylebox(es)"
@@ -11732,15 +11718,15 @@ msgstr ""
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "No styleboxes found."
-msgstr ""
+msgstr "Walang stylebox ang nahanap."
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "{num} currently selected"
-msgstr ""
+msgstr "{num} ang kasalukuyang pinipili"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Nothing was selected for the import."
-msgstr ""
+msgstr "Walang pinili upang i-import."
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Importing Theme Items"
@@ -11764,7 +11750,7 @@ msgstr ""
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "With Data"
-msgstr ""
+msgstr "May Data"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Select by data type:"
@@ -11878,9 +11864,8 @@ msgid ""
 msgstr ""
 
 #: editor/plugins/theme_editor_plugin.cpp
-#, fuzzy
 msgid "Remove Type"
-msgstr "Alisin ang Tile"
+msgstr "Alisin ang Type"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid ""
@@ -15086,18 +15071,19 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Pangalan ng Node:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Ginagamit na ang pangalan ng ibang punsyon/var/hudyat:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Pangalan ng Node:"
 
 #: editor/scene_tree_dock.cpp
@@ -15288,6 +15274,11 @@ msgid "Button Group"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Pangalan ng Node:"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr ""
 
@@ -15353,6 +15344,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17219,6 +17214,21 @@ msgstr ""
 msgid "Auto Update Project"
 msgstr "Bumalik sa Talaproyektuhan"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Ipakita Lahat"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Pumili ng Lalagyanan"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Pumili ng Lalagyanan"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19007,6 +19017,11 @@ msgstr "Kopyahin ang mga Node"
 msgid "Custom BG Color"
 msgstr "Kopyahin ang mga Node"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Palakihin lahat"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19847,6 +19862,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/tr.po b/editor/translations/tr.po
index ab58a87c36..e115c4d368 100644
--- a/editor/translations/tr.po
+++ b/editor/translations/tr.po
@@ -78,13 +78,19 @@
 # Emre <mr.inkaya@gmail.com>, 2022.
 # Deleted User <noreply+46858@weblate.org>, 2022.
 # Ümid Quliyev <lucifer25x@protonmail.com>, 2022.
+# Mustafa Said Ağca <m.said.agca@gmail.com>, 2022.
+# Yaşar Anıl Sansak <anilsansak@gmail.com>, 2022.
+# Hasan Hüseyin Cihangir <hashusfb@gmail.com>, 2022.
+# Volkan Gezer <volkangezer@gmail.com>, 2022.
+# bsr <bsndrn16@gmail.com>, 2022.
+# Ramazan SANCAR <ramazansancar4545@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-08-05 01:04+0000\n"
-"Last-Translator: Ümid Quliyev <lucifer25x@protonmail.com>\n"
+"PO-Revision-Date: 2022-08-30 03:11+0000\n"
+"Last-Translator: Ramazan SANCAR <ramazansancar4545@gmail.com>\n"
 "Language-Team: Turkish <https://hosted.weblate.org/projects/godot-engine/"
 "godot/tr/>\n"
 "Language: tr\n"
@@ -92,7 +98,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -107,6 +113,7 @@ msgid "Current Screen"
 msgstr "Şu anki Ekran"
 
 #: core/bind/core_bind.cpp
+#, fuzzy
 msgid "Exit Code"
 msgstr "Çıkış Kodu"
 
@@ -136,11 +143,11 @@ msgstr "Ekranı Açık Tut"
 
 #: core/bind/core_bind.cpp
 msgid "Min Window Size"
-msgstr "Minimum Pencere Boyutu"
+msgstr "Minimum Ekran Boyutu"
 
 #: core/bind/core_bind.cpp
 msgid "Max Window Size"
-msgstr "Maksimum Pencere Boyutu"
+msgstr "Maksimum Ekran Boyutu"
 
 #: core/bind/core_bind.cpp
 msgid "Screen Orientation"
@@ -202,7 +209,7 @@ msgstr "Endian Değişimi"
 
 #: core/bind/core_bind.cpp
 msgid "Editor Hint"
-msgstr "Düzenleyici İpucusu"
+msgstr "Editör İpucu"
 
 #: core/bind/core_bind.cpp
 msgid "Print Error Messages"
@@ -214,7 +221,7 @@ msgstr "Saniye Başına Yineleme"
 
 #: core/bind/core_bind.cpp
 msgid "Target FPS"
-msgstr "Hedef FPS"
+msgstr "Hedeflenen FPS"
 
 #: core/bind/core_bind.cpp
 msgid "Time Scale"
@@ -256,6 +263,7 @@ msgid "Limits"
 msgstr "Limitler"
 
 #: core/command_queue_mt.cpp
+#, fuzzy
 msgid "Command Queue"
 msgstr "Komut Sırası"
 
@@ -349,7 +357,7 @@ msgstr "Çıkış Arabelleği Maksimum Boyutu"
 
 #: core/io/packet_peer.cpp
 msgid "Stream Peer"
-msgstr ""
+msgstr "Akış Eşi"
 
 #: core/io/stream_peer.cpp
 msgid "Big Endian"
@@ -425,7 +433,7 @@ msgstr "Mesaj Sırası"
 
 #: core/message_queue.cpp
 msgid "Max Size (KB)"
-msgstr "En Büyük Boyut (KB)"
+msgstr "Maksimum Boyut (KB)"
 
 #: core/os/input.cpp
 msgid "Mouse Mode"
@@ -515,7 +523,6 @@ msgid "Pressure"
 msgstr "Baskı"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Pen Inverted"
 msgstr "Ters Kalem"
 
@@ -567,9 +574,8 @@ msgid "Message"
 msgstr "Mesaj"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Pitch"
-msgstr "Perde"
+msgstr "Eğim"
 
 #: core/os/input_event.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/physics_body_2d.cpp scene/3d/cpu_particles.cpp
@@ -644,7 +650,7 @@ msgstr "Stderr'i devre dışı bırak"
 
 #: core/project_settings.cpp
 msgid "Use Hidden Project Data Directory"
-msgstr "Gizlenmiş Proje Verileri Dizinini Kullan"
+msgstr "Gizli Proje Veri Dizinini Kullan"
 
 #: core/project_settings.cpp
 msgid "Use Custom User Dir"
@@ -704,12 +710,10 @@ msgid "Editor"
 msgstr "Düzenleyici"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Main Run Args"
-msgstr "Ana Sahne Değiştirgenleri:"
+msgstr "Oynatma Argümanları"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Scene Naming"
 msgstr "Sahne Adlandırma"
 
@@ -722,14 +726,12 @@ msgid "Script Templates Search Path"
 msgstr "Script Dosyalarını Aramak İçin Dosya Yolu"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Autoload On Startup"
 msgstr "Başlangıçta Otomatik Sürüm Kontrolü"
 
 #: core/project_settings.cpp
-#, fuzzy
 msgid "Version Control Plugin Name"
-msgstr "Sürüm Denetimi Eklenti Adı"
+msgstr "Sürüm Denetim Eklentisi Adı"
 
 #: core/project_settings.cpp scene/2d/collision_object_2d.cpp
 #: scene/3d/collision_object.cpp scene/gui/control.cpp
@@ -864,9 +866,8 @@ msgstr "Ayarlar"
 
 #: core/project_settings.cpp editor/script_editor_debugger.cpp main/main.cpp
 #: modules/mono/mono_gd/gd_mono.cpp
-#, fuzzy
 msgid "Profiler"
-msgstr "Kesitçi"
+msgstr "Profil Oluşturucu"
 
 #: core/project_settings.cpp
 msgid "Max Functions"
@@ -921,7 +922,6 @@ msgid "Connect Timeout Seconds"
 msgstr "Bağlanma Zaman Aşımı Süresi(Saniye)"
 
 #: core/register_core_types.cpp
-#, fuzzy
 msgid "Packet Peer Stream"
 msgstr "Paket Eş Akışı"
 
@@ -963,7 +963,6 @@ msgid "Locale"
 msgstr "Yerel"
 
 #: core/translation.cpp
-#, fuzzy
 msgid "Test"
 msgstr "Deneme"
 
@@ -1051,9 +1050,8 @@ msgstr "Işık Haritalama"
 
 #: drivers/gles2/rasterizer_storage_gles2.cpp
 #: drivers/gles3/rasterizer_storage_gles3.cpp
-#, fuzzy
 msgid "Use Bicubic Sampling"
-msgstr "Bicubic Örneklemeyi Kullanın"
+msgstr "Çift Kübik Örneklemeyi Kullan"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Max Renderable Elements"
@@ -1073,7 +1071,7 @@ msgstr "Maks. Objeye düşen Işık Sayısı"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
 msgid "Subsurface Scattering"
-msgstr ""
+msgstr "Yüzeyaltı Saçılması"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp editor/animation_track_editor.cpp
 #: editor/import/resource_importer_texture.cpp
@@ -1097,9 +1095,8 @@ msgid "Weight Samples"
 msgstr "Ağırlık Örnekleri"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp
-#, fuzzy
 msgid "Voxel Cone Tracing"
-msgstr "Işın İzleme"
+msgstr "Voksel Koni İzleme"
 
 #: drivers/gles3/rasterizer_scene_gles3.cpp scene/resources/environment.cpp
 msgid "High Quality"
@@ -1112,7 +1109,7 @@ msgstr "Karışım Şekli Maksimum Arabellek Boyutu (KB)"
 #. TRANSLATORS: Adjective, refers to the mode for Bezier handles (Free, Balanced, Mirror).
 #: editor/animation_bezier_editor.cpp
 msgid "Free"
-msgstr "Özgür"
+msgstr "Serbest"
 
 #: editor/animation_bezier_editor.cpp
 msgid "Balanced"
@@ -1151,16 +1148,19 @@ msgid "Move Bezier Points"
 msgstr "Bezier Noktalarını Taşı"
 
 #: editor/animation_bezier_editor.cpp editor/animation_track_editor.cpp
+#, fuzzy
 msgid "Anim Duplicate Keys"
-msgstr "Animasyon Anahtarlarını Çoğalt"
+msgstr "Animasyon Anahtarları Çoğalt"
 
 #: editor/animation_bezier_editor.cpp editor/animation_track_editor.cpp
+#, fuzzy
 msgid "Anim Delete Keys"
 msgstr "Animasyon Anahtarları Sil"
 
 #: editor/animation_track_editor.cpp
+#, fuzzy
 msgid "Anim Change Keyframe Time"
-msgstr "Anim Anahtar-kare Zamanını Değiştir"
+msgstr "Animasyon Bağımsız Kare Zamanını Değiştir"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Change Transition"
@@ -1171,8 +1171,9 @@ msgid "Anim Change Transform"
 msgstr "Animasyon Değişikliği Dönüşümü"
 
 #: editor/animation_track_editor.cpp
+#, fuzzy
 msgid "Anim Change Keyframe Value"
-msgstr "Anim Anahtar-kare Değerini Değiştir"
+msgstr "Animasyon Bağımsız Kare Değerini Değiştir"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Change Call"
@@ -1224,32 +1225,27 @@ msgid "Type"
 msgstr "Tür"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "In Handle"
-msgstr "Tutamacı Ayarla"
+msgstr "İç Kulp"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Out Handle"
-msgstr "Tutamacı Ayarla"
+msgstr "Dış Kulp"
 
 #: editor/animation_track_editor.cpp
 #: editor/import/resource_importer_texture.cpp
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/audio_stream_player_3d.cpp
 #: scene/audio/audio_stream_player.cpp scene/gui/video_player.cpp
-#, fuzzy
 msgid "Stream"
-msgstr "Aktarım"
+msgstr "Akış"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Start Offset"
-msgstr "Izgarayı Kaydır:"
+msgstr "Başlangıç Dengeleme"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "End Offset"
-msgstr "Kaydırma:"
+msgstr "Bitiş Dengeleme"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
 #: editor/import/resource_importer_scene.cpp
@@ -1266,8 +1262,9 @@ msgid "Easing"
 msgstr "Yumuşatma"
 
 #: editor/animation_track_editor.cpp
+#, fuzzy
 msgid "Anim Multi Change Keyframe Time"
-msgstr "Animasyon Anahtar-Çerçeve Zamanını Değiştir"
+msgstr "Animasyon Çoklu Bağımsız Kare Zamanı Değiştir"
 
 #: editor/animation_track_editor.cpp
 msgid "Anim Multi Change Transition"
@@ -1300,7 +1297,7 @@ msgstr "Özellik Parçası"
 
 #: editor/animation_track_editor.cpp
 msgid "3D Transform Track"
-msgstr "3D Dönüştürücü İzi"
+msgstr "3B Dönüştürücü İzi"
 
 #: editor/animation_track_editor.cpp
 msgid "Call Method Track"
@@ -1398,41 +1395,34 @@ msgid "Type:"
 msgstr "Tür:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "(Invalid, expected type: %s)"
-msgstr "(Geçersiz Dışa Aktarım Şablonu: %s)"
+msgstr "(Geçersiz, beklenen tür: %s)"
 
 #: editor/animation_track_editor.cpp
 msgid "Easing:"
 msgstr "Yumuşatma:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "In-Handle:"
-msgstr "Tutamacı Ayarla"
+msgstr "İç-Kulp:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Out-Handle:"
-msgstr "Tutamacı Ayarla"
+msgstr "Dış-Kulp:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Stream:"
-msgstr "Aktarım:"
+msgstr "Akış:"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Start (s):"
-msgstr "Başlangıç (lar):"
+msgstr "Başlangıç (saniye):"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "End (s):"
-msgstr "Bitiş (ler):"
+msgstr "Bitiş (saniye):"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Animation Clip:"
 msgstr "Animasyon Klibi:"
 
@@ -1518,12 +1508,10 @@ msgstr "Animasyon İzini Kaldır"
 #: editor/plugins/tile_map_editor_plugin.cpp editor/scene_tree_dock.cpp
 #: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
 #: modules/gridmap/grid_map_editor_plugin.cpp
-#, fuzzy
 msgid "Editors"
-msgstr "Düzenleyici"
+msgstr "Editörler"
 
 #: editor/animation_track_editor.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Confirm Insert Track"
 msgstr "Parça Eklemeyi Onayla"
 
@@ -1650,7 +1638,6 @@ msgid "Add Method Track Key"
 msgstr "Yöntem İz Anahtarı Ekle"
 
 #: editor/animation_track_editor.cpp
-#, fuzzy
 msgid "Method not found in object:"
 msgstr "Metot, nesne içinde bulunamadı:"
 
@@ -1672,7 +1659,7 @@ msgstr "Metodlar"
 
 #: editor/animation_track_editor.cpp
 msgid "Bezier"
-msgstr ""
+msgstr "Bezier Eğrisi"
 
 #: editor/animation_track_editor.cpp
 #: modules/visual_script/visual_script_editor.cpp
@@ -1845,7 +1832,7 @@ msgstr "Maks. Eniyileştirilebilir Açı:"
 #: editor/animation_track_editor.cpp scene/3d/room_manager.cpp
 #: servers/visual_server.cpp
 msgid "Optimize"
-msgstr "İyileştir"
+msgstr "En İyileştir"
 
 #: editor/animation_track_editor.cpp
 msgid "Remove invalid keys"
@@ -2262,7 +2249,6 @@ msgid "Open"
 msgstr "Aç"
 
 #: editor/dependency_editor.cpp
-#, fuzzy
 msgid "Owners of: %s (Total: %d)"
 msgstr "Sahipleri: %s (Toplam: %d)"
 
@@ -2376,7 +2362,6 @@ msgstr "Baş Geliştirici"
 
 #. TRANSLATORS: This refers to a job title.
 #: editor/editor_about.cpp
-#, fuzzy
 msgctxt "Job Title"
 msgid "Project Manager"
 msgstr "Proje Yöneticisi"
@@ -2621,9 +2606,8 @@ msgid "There is no '%s' file."
 msgstr "'%s' dosyası bulunamadı."
 
 #: editor/editor_audio_buses.cpp
-#, fuzzy
 msgid "Layout:"
-msgstr "Yerleşim Düzeni:"
+msgstr "Düzen:"
 
 #: editor/editor_audio_buses.cpp
 msgid "Invalid file, not an audio bus layout."
@@ -2672,7 +2656,6 @@ msgid "Create a new Bus Layout."
 msgstr "Yeni bir Bus Yerleşim Düzeni oluştur."
 
 #: editor/editor_audio_buses.cpp
-#, fuzzy
 msgid "Audio Bus Layout"
 msgstr "Ses Veri Yolu Düzeni"
 
@@ -2682,7 +2665,7 @@ msgstr "Geçersiz ad."
 
 #: editor/editor_autoload_settings.cpp
 msgid "Cannot begin with a digit."
-msgstr "Basamak ile başlayamaz."
+msgstr "Rakamla başlanamaz."
 
 #: editor/editor_autoload_settings.cpp
 msgid "Valid characters:"
@@ -2826,22 +2809,18 @@ msgid "Choose"
 msgstr "Seç"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Project export for platform:"
 msgstr "Platform için proje dışa aktarımı:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "Hatalarla tamamlandı."
+msgstr "Uyarılar ile tamamlandı."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed successfully."
 msgstr "Başarıyla tamamlandı."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed."
 msgstr "Başarısız."
 
@@ -2855,32 +2834,27 @@ msgstr "Beklenen adreste dışa aktarım şablonu bulunamadı:"
 
 #: editor/editor_export.cpp
 msgid "Packing"
-msgstr "Çıkınla"
+msgstr "Paketle"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save PCK"
-msgstr "PCK'yi kaydet"
+msgstr "PCK Dosyasına Kaydet"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Cannot create file \"%s\"."
 msgstr "\"%s\" dosyası oluşturulamıyor."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to export project files."
 msgstr "Proje dosyaları dışa aktarılamadı."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Can't open file to read from path \"%s\"."
 msgstr "\"%s\" yolundan okunacak dosya açılamıyor."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Save ZIP"
-msgstr "ZIP dosyasını kaydet"
+msgstr "ZIP Dosyasına Kaydet"
 
 #: editor/editor_export.cpp
 msgid ""
@@ -2941,7 +2915,6 @@ msgstr ""
 #: editor/editor_export.cpp platform/android/export/export_plugin.cpp
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Custom Template"
 msgstr "Özel Şablon"
 
@@ -2953,49 +2926,40 @@ msgid "Release"
 msgstr "Yayınlamak"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Binary Format"
-msgstr "Çift Biçim"
+msgstr "Binary Biçimi"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "64 Bits"
 msgstr "64 Bit"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Embed PCK"
-msgstr "PCK'yı yerleştirin"
+msgstr "PCK'yi Yerleştir"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Texture Format"
 msgstr "Doku Biçimi"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "BPTC"
 msgstr "BPTC"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "S3TC"
 msgstr "S3TC"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "ETC"
 msgstr "ETC"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "ETC2"
 msgstr "ETC2"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "No BPTC Fallbacks"
-msgstr "Shader Yedeklerini Zorla"
+msgstr "BPTC Gerilemesi Yok"
 
 #: editor/editor_export.cpp platform/android/export/export_plugin.cpp
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
@@ -3010,39 +2974,33 @@ msgid "Custom release template not found."
 msgstr "Özel yayınlama şablonu bulunamadı."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Prepare Template"
 msgstr "Şablon Hazırla"
 
 #: editor/editor_export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "The given export path doesn't exist."
-msgstr "Belirtilen Dışa aktarım yolu mevcut değil:"
+msgstr "Belirtilen dışa aktarım yolu mevcut değil."
 
 #: editor/editor_export.cpp platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Template file not found: \"%s\"."
 msgstr "Şablon dosyası bulunamadı: \"%s\"."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Failed to copy export template."
-msgstr "Dışa aktarma şablonu kopyalanamadı."
+msgstr "Dışa aktarım şablonu kopyalanamadı."
 
 #: editor/editor_export.cpp platform/windows/export/export.cpp
 #: platform/x11/export/export.cpp
-#, fuzzy
 msgid "PCK Embedding"
-msgstr "Dolgulama"
+msgstr "PCK Gömme"
 
 #: editor/editor_export.cpp
 msgid "On 32-bit exports the embedded PCK cannot be bigger than 4 GiB."
 msgstr "32-bit dışa aktarımlarda gömülü PCK 4GiB'tan büyük olamaz."
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Convert Text Resources To Binary On Export"
-msgstr "Dışa Aktarmada Metin Kaynaklarını İkili Dosyaya Dönüştür"
+msgstr "Dışa Aktarım Sırasında Metin Kaynaklarını Binary Formata Dönüştür"
 
 #: editor/editor_feature_profile.cpp
 msgid "3D Editor"
@@ -3063,19 +3021,19 @@ msgstr "Sahne Ağacı Düzenleme"
 
 #: editor/editor_feature_profile.cpp
 msgid "Node Dock"
-msgstr "Dock Nod"
+msgstr "Node Rıhtımı"
 
 #: editor/editor_feature_profile.cpp
 msgid "FileSystem Dock"
-msgstr "Dosya Sistemi"
+msgstr "Dosya Sistemi Rıhtımı"
 
 #: editor/editor_feature_profile.cpp
 msgid "Import Dock"
-msgstr "Dock İçe Aktar"
+msgstr "Rıhtım İçe Aktar"
 
 #: editor/editor_feature_profile.cpp
 msgid "Allows to view and edit 3D scenes."
-msgstr "3D sahneleri görüntülemeye ve düzenlemeye izin verir."
+msgstr "Üç boyutlu sahneleri görüntülemeye ve düzenlemeye izin verir."
 
 #: editor/editor_feature_profile.cpp
 msgid "Allows to edit scripts using the integrated script editor."
@@ -3113,7 +3071,7 @@ msgstr ""
 
 #: editor/editor_feature_profile.cpp
 msgid "(current)"
-msgstr "(Şu anki)"
+msgstr "(mevcut)"
 
 #: editor/editor_feature_profile.cpp
 msgid "(none)"
@@ -3251,7 +3209,6 @@ msgid "Manage Editor Feature Profiles"
 msgstr "Dışa Aktarım Şablonlarını Yönet"
 
 #: editor/editor_feature_profile.cpp
-#, fuzzy
 msgid "Default Feature Profile"
 msgstr "Varsayılan Özellik Profili"
 
@@ -3325,14 +3282,12 @@ msgid "Save a File"
 msgstr "Bir Dosya Kaydet"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Access"
 msgstr "Erişim"
 
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Display Mode"
-msgstr "Ekran Modu"
+msgstr "Görüntüleme Modu"
 
 #: editor/editor_file_dialog.cpp
 #: editor/import/resource_importer_layered_texture.cpp
@@ -3345,33 +3300,27 @@ msgstr "Ekran Modu"
 #: scene/resources/environment.cpp scene/resources/material.cpp
 #: scene/resources/visual_shader.cpp
 #: servers/audio/effects/audio_effect_distortion.cpp
-#, fuzzy
 msgid "Mode"
 msgstr "Mod"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Current Dir"
 msgstr "Geçerli Dizin"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Current File"
 msgstr "Geçerli Dosya"
 
 #: editor/editor_file_dialog.cpp scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Current Path"
 msgstr "Geçerli Yol"
 
 #: editor/editor_file_dialog.cpp editor/editor_settings.cpp
 #: scene/gui/file_dialog.cpp
-#, fuzzy
 msgid "Show Hidden Files"
 msgstr "Gizli Dosyaları Göster"
 
 #: editor/editor_file_dialog.cpp
-#, fuzzy
 msgid "Disable Overwrite Warning"
 msgstr "Üzerine Yazma Uyarısını Devre Dışı Bırak"
 
@@ -3475,9 +3424,8 @@ msgid "(Re)Importing Assets"
 msgstr "Varlıklar Yeniden-İçe Aktarılıyor"
 
 #: editor/editor_file_system.cpp
-#, fuzzy
 msgid "Reimport Missing Imported Files"
-msgstr "İçe Aktarılan Eksik Dosyaları Yeniden İçe Aktar"
+msgstr "Eksik Dosyaları Yeniden İçe Aktar"
 
 #: editor/editor_help.cpp scene/2d/camera_2d.cpp scene/gui/control.cpp
 #: scene/gui/nine_patch_rect.cpp scene/resources/dynamic_font.cpp
@@ -3507,7 +3455,6 @@ msgid "Properties"
 msgstr "Özellikler"
 
 #: editor/editor_help.cpp
-#, fuzzy
 msgid "overrides %s:"
 msgstr "%s'yi geçersiz kılar:"
 
@@ -3579,9 +3526,8 @@ msgstr ""
 #: editor/plugins/script_text_editor.cpp
 #: modules/gdscript/editor/gdscript_highlighter.cpp
 #: modules/gdscript/gdscript_editor.cpp
-#, fuzzy
 msgid "Text Editor"
-msgstr "Metin Düzenleyici"
+msgstr "Metin Editörü"
 
 #: editor/editor_help.cpp editor/editor_node.cpp editor/editor_settings.cpp
 #: editor/plugins/shader_editor_plugin.cpp
@@ -3589,7 +3535,6 @@ msgid "Help"
 msgstr "Yardım"
 
 #: editor/editor_help.cpp
-#, fuzzy
 msgid "Sort Functions Alphabetically"
 msgstr "Fonksiyonları Alfabetik Olarak Sırala"
 
@@ -3671,40 +3616,34 @@ msgid "Property:"
 msgstr "Özellik:"
 
 #: editor/editor_inspector.cpp editor/editor_spin_slider.cpp
-#, fuzzy
 msgid "Label"
 msgstr "Etiket"
 
 #: editor/editor_inspector.cpp editor/editor_spin_slider.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Read Only"
-msgstr "Sadece Okunur"
+msgstr "Salt Okunur"
 
 #: editor/editor_inspector.cpp editor/plugins/item_list_editor_plugin.cpp
-#, fuzzy
 msgid "Checkable"
-msgstr "Kontrol edilebilir"
+msgstr "Denetlenebilir"
 
 #: editor/editor_inspector.cpp editor/plugins/item_list_editor_plugin.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Checked"
-msgstr "Kontrol edildi"
+msgstr "Denetlendi"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Draw Red"
 msgstr "Kırmızı Çiz"
 
 #: editor/editor_inspector.cpp
-#, fuzzy
 msgid "Keying"
 msgstr "Anahtarlama"
 
 #: editor/editor_inspector.cpp
 msgid "Pin value"
-msgstr "İğneleme değeri"
+msgstr "Sabitleme değeri"
 
 #: editor/editor_inspector.cpp
 msgid ""
@@ -3715,7 +3654,7 @@ msgstr ""
 #: editor/editor_inspector.cpp
 msgid "Pin value [Disabled because '%s' is editor-only]"
 msgstr ""
-"Değer sabitle [Devre dışı bırakıldı çünkü '%s' sadece editör için aktiftir]"
+"Sabitleme değeri [Devre dışı bırakıldı çünkü '%s' sadece editör içindir]"
 
 #: editor/editor_inspector.cpp
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
@@ -3732,11 +3671,11 @@ msgstr "Çoklu Ayarla:"
 
 #: editor/editor_inspector.cpp
 msgid "Pinned %s"
-msgstr "% Sabitlenmişler"
+msgstr "%s sabitlendi"
 
 #: editor/editor_inspector.cpp
 msgid "Unpinned %s"
-msgstr "%Sabitlenmemişler"
+msgstr "%s serbest bırakıldı"
 
 #: editor/editor_inspector.cpp
 msgid "Copy Property"
@@ -4063,14 +4002,12 @@ msgid "Quick Open Script..."
 msgstr "Betiği Hızlı Aç..."
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Save & Reload"
 msgstr "Kaydet ve Yeniden Yükle"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Save changes to '%s' before reloading?"
-msgstr "Çıkmadan önce değişiklikler '%s' ‘ye kaydedilsin mi?"
+msgstr "Yeniden yüklemeden önce değişiklikler '%s' dosyasına kaydedilsin mi?"
 
 #: editor/editor_node.cpp
 msgid "Save & Close"
@@ -4189,9 +4126,9 @@ msgid "Open Project Manager?"
 msgstr "Proje Yöneticisi Açılsın Mı?"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Save changes to the following scene(s) before reloading?"
-msgstr "Çıkmadan önce değişiklikler sahne(ler)e kaydedilsin mi?"
+msgstr ""
+"Yeniden yüklemeden önce şu sahne(ler)deki değişiklikler kaydedilsin mi?"
 
 #: editor/editor_node.cpp
 msgid "Save & Quit"
@@ -4375,7 +4312,6 @@ msgid "%d more files"
 msgstr "%d daha fazla dosyalar"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid ""
 "Unable to write to file '%s', file in use, locked or lacking permissions."
 msgstr ""
@@ -4419,70 +4355,60 @@ msgid "Always Close Output On Stop"
 msgstr "Durdurulduğunda Çıktıyı Daima Kapat"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Save On Focus Loss"
-msgstr "Odak Kaybından Tasarruf Edin"
+msgstr "Odak Kaybında Kaydet"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Save Each Scene On Quit"
-msgstr "Dalı Sahne olarak Kaydet"
+msgstr "Çıkışta Her Sahneyi Kaydet"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Quit Confirmation"
-msgstr "Bilgi Göster"
+msgstr "Çıkış Onayı"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Show Update Spinner"
-msgstr "Güncelleme Topacını Gizle"
+msgstr "Güncelleme İkonunu Göster"
 
 #: editor/editor_node.cpp
 msgid "Update Continuously"
 msgstr "Sürekli Güncelle"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Update Vital Only"
-msgstr "Materyal Değişiklikleri:"
+msgstr "Sadece Önemli Güncellemeler"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Localize Settings"
-msgstr "Yerelleştirme"
+msgstr "Yerelleştirme Ayarları"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Restore Scenes On Load"
-msgstr "Sahne Düğümünü Al"
+msgstr "Açılışta Sahneleri Geri Yükle"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Thumbnail On Hover"
-msgstr "Fareyle üzerine gelindiğinde  küçük resmi  göster"
+msgstr "Üzerine Gelindiğinde Küçük Resim Göster"
 
 #: editor/editor_node.cpp editor/editor_settings.cpp
 msgid "Inspector"
-msgstr "Denetçi"
+msgstr "Denetleyici"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Default Property Name Style"
-msgstr "Proje Yolu:"
+msgstr "Varsayılan Özellik İsim Biçimi"
 
 #: editor/editor_node.cpp
 msgid "Default Float Step"
-msgstr ""
+msgstr "Varsayılan Ondalık Adımı"
 
 #: editor/editor_node.cpp scene/gui/tree.cpp
-#, fuzzy
 msgid "Disable Folding"
-msgstr "Pasif Düğme"
+msgstr "Katlamayı Devre Dışı Bırak"
 
 #: editor/editor_node.cpp
 msgid "Auto Unfold Foreign Scenes"
-msgstr ""
+msgstr "Harici Sahneleri Otomatik Olarak Yay"
 
 #: editor/editor_node.cpp
 msgid "Horizontal Vector2 Editing"
@@ -4493,19 +4419,16 @@ msgid "Horizontal Vector Types Editing"
 msgstr "Yatay Vector tipleri düzenleme"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Open Resources In Current Inspector"
-msgstr "Gözetmen Bölümünde Aç"
+msgstr "Kaynakları Mevcut Denetleyicide Aç"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Resources To Open In New Inspector"
-msgstr "Gözetmen Bölümünde Aç"
+msgstr "Yeni Denetleyicide Açılacak Kaynaklar"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Default Color Picker Mode"
-msgstr "Varsayılan renk seçme modu"
+msgstr "Varsayılan Renk Seçme Modu"
 
 #: editor/editor_node.cpp editor/plugins/version_control_editor_plugin.cpp
 msgid "Version Control"
@@ -4615,6 +4538,7 @@ msgstr "Çeşitli proje ya da sahne-çapında araçlar."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Proje"
 
@@ -4896,14 +4820,12 @@ msgid "Save & Restart"
 msgstr "Kaydet ve Baştan Başlat"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Update All Changes"
-msgstr "Değişiklik Olduğunda Güncelle"
+msgstr "Tüm Değişiklikleri Güncelle"
 
 #: editor/editor_node.cpp
-#, fuzzy
 msgid "Update Vital Changes"
-msgstr "Materyal Değişiklikleri:"
+msgstr "Önemli Değişiklikleri Güncelle"
 
 #: editor/editor_node.cpp
 msgid "Hide Update Spinner"
@@ -5164,12 +5086,11 @@ msgstr "Hata Ayıklayıcı"
 
 #: editor/editor_profiler.cpp
 msgid "Profiler Frame History Size"
-msgstr ""
+msgstr "Profil Oluşturucu Çerçeve Geçmişi Boyutu"
 
 #: editor/editor_profiler.cpp
-#, fuzzy
 msgid "Profiler Frame Max Functions"
-msgstr "İşlevi Yeniden Adlandır"
+msgstr "Profil Oluşturucu Çerçeve Maksimum Fonksiyon Sayısı"
 
 #: editor/editor_properties.cpp
 msgid "Edit Text:"
@@ -5302,20 +5223,17 @@ msgstr "Yeni %s"
 #: modules/visual_script/visual_script_func_nodes.cpp
 #: modules/visual_script/visual_script_nodes.cpp
 #: modules/visual_script/visual_script_yield_nodes.cpp
-#, fuzzy
 msgid "Base Type"
-msgstr "Temel Tipi Değiştir"
+msgstr "Temel Tür"
 
 #: editor/editor_resource_picker.cpp
-#, fuzzy
 msgid "Edited Resource"
-msgstr "Kaynak Ekle"
+msgstr "Değiştirilmiş Kaynak"
 
 #: editor/editor_resource_picker.cpp scene/gui/line_edit.cpp
 #: scene/gui/slider.cpp scene/gui/spin_box.cpp
-#, fuzzy
 msgid "Editable"
-msgstr "Düzenlenebilir Öge"
+msgstr "Düzenlenebilir"
 
 #: editor/editor_resource_picker.cpp editor/property_editor.cpp
 msgid "New Script"
@@ -5326,9 +5244,8 @@ msgid "Extend Script"
 msgstr "Betik Aç"
 
 #: editor/editor_resource_picker.cpp
-#, fuzzy
 msgid "Script Owner"
-msgstr "Betik Adı:"
+msgstr "Senaryo Sahibi"
 
 #: editor/editor_run_native.cpp
 msgid ""
@@ -5341,9 +5258,8 @@ msgstr ""
 "bir ön ayarı çalıştırılabilir olarak tanımlayın."
 
 #: editor/editor_run_native.cpp
-#, fuzzy
 msgid "Project Run"
-msgstr "Proje"
+msgstr "Proje Koşusu"
 
 #: editor/editor_run_script.cpp
 msgid "Write your logic in the _run() method."
@@ -5370,14 +5286,12 @@ msgid "Did you forget the '_run' method?"
 msgstr "'_run()' metodunu unuttunuz mu?"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Editor Language"
-msgstr "Düzenleyici Yerleşim Düzeni"
+msgstr "Editör Dili"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Display Scale"
-msgstr "Hepsini Görüntüle"
+msgstr "Ölçeği Görüntüle"
 
 #: editor/editor_settings.cpp
 msgid "Custom Display Scale"
@@ -5397,48 +5311,43 @@ msgstr "Kenarı yumuşatılmış font"
 
 #: editor/editor_settings.cpp
 msgid "Font Hinting"
-msgstr ""
+msgstr "Yazıtipi İpucusu"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Main Font"
-msgstr "Ana Sahne"
+msgstr "Ana Yazı Tipi"
 
 #: editor/editor_settings.cpp
 msgid "Main Font Bold"
 msgstr "Ana font kalınlığı"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Code Font"
-msgstr "Düğüm Noktası Ekle"
+msgstr "Kod Yazı Tipi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Dim Editor On Dialog Popup"
-msgstr "İletişim penceresinde Dim Editörü"
+msgstr "Popup Diyalog Çıktığında Editörü Karart"
 
 #: editor/editor_settings.cpp main/main.cpp
 msgid "Low Processor Mode Sleep (µsec)"
-msgstr ""
+msgstr "Düşük İşlemci Modu Uykusu (mikrosaniye)"
 
 #: editor/editor_settings.cpp
 msgid "Unfocused Low Processor Mode Sleep (µsec)"
-msgstr ""
+msgstr "Odaklanılmamış Düşük İşlemci Modu Uykusu (mikrosaniye)"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Separate Distraction Mode"
-msgstr "Dikkat Dağıtmayan Kip"
+msgstr "Ayrık Dikkat Modu"
 
 #: editor/editor_settings.cpp
 msgid "Automatically Open Screenshots"
 msgstr "Otomatik olarak ekran görüntülerini aç"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Max Array Dictionary Items Per Page"
-msgstr "Her sayfada maks dizi sözlüğü öğesi"
+msgstr "Sayfa Başına Maksimum Dizi Sözlüğü Öğesi"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
 #: editor/plugins/theme_editor_plugin.cpp scene/gui/control.cpp
@@ -5455,14 +5364,12 @@ msgid "Icon And Font Color"
 msgstr "Simge ve Font rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Base Color"
-msgstr "Renkler"
+msgstr "Temel Renk"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Accent Color"
-msgstr "Renk Seç"
+msgstr "Vurgu Rengi"
 
 #: editor/editor_settings.cpp scene/resources/environment.cpp
 msgid "Contrast"
@@ -5470,113 +5377,96 @@ msgstr "Kontrast"
 
 #: editor/editor_settings.cpp
 msgid "Relationship Line Opacity"
-msgstr ""
+msgstr "İlişki Hattı Opaklığı"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Highlight Tabs"
-msgstr "Işık-haritaları kaydediliyor"
+msgstr "Tab Karakterlerini Vurgula"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Border Size"
-msgstr "Kenar Pikselleri"
+msgstr "Kenarlık Boyutu"
 
 #: editor/editor_settings.cpp
 msgid "Use Graph Node Headers"
-msgstr ""
+msgstr "Grafik Node Üstbilgilerini Kullan"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Additional Spacing"
-msgstr "Animasyon Döngüsü"
+msgstr "Ek Boşluk"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Custom Theme"
-msgstr "Editör Teması"
+msgstr "Özel Tema"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Script Button"
-msgstr "Tekerlek Sağ Düğme"
+msgstr "Senaryo Düğmesini Göster"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Directories"
-msgstr "Yönler"
+msgstr "Klasörler"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Autoscan Project Path"
-msgstr "Proje Yolu:"
+msgstr "Proje Yolunu Otomatik Tara"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Default Project Path"
-msgstr "Proje Yolu:"
+msgstr "Varsayılan Proje Yolu"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "On Save"
-msgstr "Kaydet"
+msgstr "Kayıtta"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Compress Binary Resources"
-msgstr "Kaynağı Tıpkıla"
+msgstr "Binary Kaynakları Sıkıştır"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Safe Save On Backup Then Rename"
-msgstr ""
+msgstr "İsimlendirdikten Sonra Yedeğe Güvenli Kaydet"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "File Dialog"
-msgstr "XForm İletişim Kutusu"
+msgstr "Dosya Diyaloğu"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Thumbnail Size"
-msgstr "Küçük Resim..."
+msgstr "Küçük Resim Boyutu"
 
 #: editor/editor_settings.cpp
 msgid "Docks"
-msgstr "Eklentiler"
+msgstr "Rıhtımlar"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Scene Tree"
-msgstr "Sahne Ağacını Al"
+msgstr "Sahne Ağacı"
 
 #: editor/editor_settings.cpp
 msgid "Start Create Dialog Fully Expanded"
-msgstr ""
+msgstr "Oluştur Diyaloğunu Tam Boy Başlat"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Always Show Folders"
-msgstr "Daima Izgarayı Göster"
+msgstr "Klasörleri Daima Göster"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Property Editor"
-msgstr "Grup Düzenleyici"
+msgstr "Özellik Editörü"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Auto Refresh Interval"
-msgstr "Otomatik yenileme intervalı"
+msgstr "Otomatik Yenileme Aralığı"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Subresource Hue Tint"
-msgstr "Alt Kaynaklar"
+msgstr "Alt Kaynak Renk Tonu"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Color Theme"
-msgstr "Editör Teması"
+msgstr "Renk Teması"
 
 #: editor/editor_settings.cpp scene/3d/label_3d.cpp
 #: scene/resources/default_theme/default_theme.cpp
@@ -5585,50 +5475,44 @@ msgstr "Satır aralığı"
 
 #: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
 #: modules/gdscript/editor/gdscript_highlighter.cpp
-#, fuzzy
 msgid "Highlighting"
-msgstr "Doğrudan aydınlatma"
+msgstr "Vurgulama"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Syntax Highlighting"
-msgstr "Yazım Vurgulama"
+msgstr "Sözdizim Vurgulama"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
 msgid "Highlight All Occurrences"
-msgstr ""
+msgstr "Tüm Olayları Vurgula"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
 msgid "Highlight Current Line"
-msgstr "Geçerli satırı vurgula"
+msgstr "Mevcut Satırı Vurgula"
 
 #: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
 msgid "Highlight Type Safe Lines"
-msgstr ""
+msgstr "Tip Güvenliğine Tabi Satırları Vurgula"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Indent"
-msgstr "Sola Girintile"
+msgstr "Girintile"
 
 #: editor/editor_settings.cpp editor/plugins/script_text_editor.cpp
 msgid "Auto Indent"
 msgstr "Kendinden Girintili"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Convert Indent On Save"
-msgstr "Girintiyi Boşluklara Dönüştür"
+msgstr "Kayıt Sırasında Girintileri Dönüştür"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Draw Tabs"
-msgstr "Çizim Çağrıları:"
+msgstr "Tab Karakterlerini Çiz"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Draw Spaces"
-msgstr "Çizim Çağrıları:"
+msgstr "Boşluk Karakterlerini Çiz"
 
 #: editor/editor_settings.cpp editor/plugins/spatial_editor_plugin.cpp
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/tile_map.cpp
@@ -5646,9 +5530,8 @@ msgid "V Scroll Speed"
 msgstr "V kaydırma hızı"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Minimap"
-msgstr "Başlatımı Göster"
+msgstr "Mini Haritayı Göster"
 
 #: editor/editor_settings.cpp
 msgid "Minimap Width"
@@ -5656,113 +5539,102 @@ msgstr "Küçük Harita Genişliği"
 
 #: editor/editor_settings.cpp
 msgid "Mouse Extra Buttons Navigate History"
-msgstr ""
+msgstr "Ek Fare Butonları Geçmişte Gezinmek İçin Kullanılsın"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Drag And Drop Selection"
-msgstr "GridMap Seçimi"
+msgstr "Sürükle ve Bırak Seçimi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Stay In Script Editor On Node Selected"
-msgstr "Seçilmiş Düğümde Script Editöründe Kal"
+msgstr "Node Seçiminde Senaryo Editöründe Kal"
 
 #: editor/editor_settings.cpp
 msgid "Appearance"
 msgstr "Dış görünüş"
 
 #: editor/editor_settings.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Show Line Numbers"
-msgstr "Satır Numarası:"
+msgstr "Satır Numaralarını Göster"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Line Numbers Zero Padded"
-msgstr "Satır Numarası:"
+msgstr "Satır Numaralarının Başına Sıfır Ekle"
 
 #: editor/editor_settings.cpp
 msgid "Show Bookmark Gutter"
-msgstr ""
+msgstr "Yer İmi Boşluğunu Göster"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Breakpoint Gutter"
-msgstr "İşaret Noktalarını Atla"
+msgstr "Breakpoint Boşluğunu Göster"
 
 #: editor/editor_settings.cpp
 msgid "Show Info Gutter"
-msgstr ""
+msgstr "Bilgi Boşluğunu Göster"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Code Folding"
-msgstr "Kod katlama"
+msgstr "Kod Katlama"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Word Wrap"
-msgstr "Kelime Paketle"
+msgstr "Sözcük Kaydırma"
 
 #: editor/editor_settings.cpp
 msgid "Show Line Length Guidelines"
-msgstr ""
+msgstr "Satır Uzunluğu Yönergelerini Göster"
 
 #: editor/editor_settings.cpp
 msgid "Line Length Guideline Soft Column"
-msgstr ""
+msgstr "Satır Uzunluğu Yönergesi Yumuşak Sütun"
 
 #: editor/editor_settings.cpp
 msgid "Line Length Guideline Hard Column"
-msgstr ""
+msgstr "Satır Uzunluğu Yönergesi Sert Sütun"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
-#, fuzzy
 msgid "Script List"
-msgstr "Kod Düzenleyici"
+msgstr "Senaryo Listesi"
 
 #: editor/editor_settings.cpp
 msgid "Show Members Overview"
 msgstr "Üyelerin Genel Bakışını Göster"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
-#, fuzzy
 msgid "Files"
-msgstr "Dosya"
+msgstr "Dosyalar"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Trim Trailing Whitespace On Save"
-msgstr "İzleyenin Boşluklarını Kırp"
+msgstr "Kaydederken Satır Sonundaki Boşlukları Sil"
 
 #: editor/editor_settings.cpp
 msgid "Autosave Interval Secs"
-msgstr ""
+msgstr "Otomatik Kayıt Aralığı Saniye"
 
 #: editor/editor_settings.cpp editor/plugins/script_editor_plugin.cpp
-#, fuzzy
 msgid "Restore Scripts On Load"
-msgstr "Script'leri Yüklemede Eski Haline Getir"
+msgstr "Yükleme Sırasında Komut Dizilerini Eski Hallerine Getir"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Auto Reload And Parse Scripts On Save"
-msgstr "Kaydederken Script'leri Otomatik Tekrar yükle ve Ayrıştır"
+msgstr ""
+"Kayıt Sırasında Komut Dizilerini Otomatik Olarak Tekrar Yükle ve Çözümle"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Auto Reload Scripts On External Change"
-msgstr "Dış Değişiklikte Otomatik Olarak Script'i Geri Yükle"
+msgstr ""
+"Dışarıdan Bir Değişiklik Yapıldığında Komut Dizilerini Otomatik Olarak "
+"Yeniden Yükle"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Create Signal Callbacks"
-msgstr "Shader Yedeklerini Zorla"
+msgstr "Sinyal Geri Çağırması Oluştur"
 
 #: editor/editor_settings.cpp
 msgid "Sort Members Outline Alphabetically"
-msgstr ""
+msgstr "Fonksiyonları Alfabetik Sırala"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Cursor"
@@ -5774,35 +5646,33 @@ msgstr "Dosyanın Sonunu Kaydır"
 
 #: editor/editor_settings.cpp
 msgid "Block Caret"
-msgstr ""
+msgstr "Blok İmleç"
 
 #: editor/editor_settings.cpp
 msgid "Caret Blink"
-msgstr ""
+msgstr "Karet Yansön"
 
 #: editor/editor_settings.cpp
 msgid "Caret Blink Speed"
-msgstr ""
+msgstr "Karet Yansön Hızı"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Right Click Moves Caret"
-msgstr "Nokta eklemek için sağ tıkla"
+msgstr "Sağ Tık Kareti Hareket Ettirsin"
 
 #: editor/editor_settings.cpp modules/gdscript/gdscript.cpp
 #: modules/gdscript/gdscript_editor.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion"
-msgstr "Seçimi Kopyala"
+msgstr "Tamamlanma"
 
 #: editor/editor_settings.cpp
 msgid "Idle Parse Delay"
-msgstr ""
+msgstr "Boşta Çözümleme Gecikmesi"
 
 #: editor/editor_settings.cpp
 msgid "Auto Brace Complete"
-msgstr ""
+msgstr "Süslü Ayraçları Otomatik Eşle"
 
 #: editor/editor_settings.cpp
 msgid "Code Complete Delay"
@@ -5810,84 +5680,73 @@ msgstr "Kod Tamamlama Gecikme Süresi"
 
 #: editor/editor_settings.cpp
 msgid "Put Callhint Tooltip Below Current Line"
-msgstr ""
+msgstr "Çağırma Araç İpucunu Mavcut Satırın Altında Tut"
 
 #: editor/editor_settings.cpp
 msgid "Callhint Tooltip Offset"
-msgstr ""
+msgstr "Çağırma Araç İpucu Göreli Konumu"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Complete File Paths"
-msgstr "Düğüm Yolunu Kopyala"
+msgstr "Dosya Yollarını Tamamla"
 
 #: editor/editor_settings.cpp modules/gdscript/gdscript_editor.cpp
-#, fuzzy
 msgid "Add Type Hints"
-msgstr "Tür Ekle"
+msgstr "Tür İpuçlarını Ekle"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Use Single Quotes"
-msgstr "Yeni Döşeme Parçacığı"
+msgstr "Tek Tırnak İşareti Kullan"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Show Help Index"
-msgstr "Yardımcıları Göster"
+msgstr "Yardım İndeksini Göster"
 
 #: editor/editor_settings.cpp
 msgid "Help Font Size"
-msgstr ""
+msgstr "Yardım Yazı Tipi Boyutu"
 
 #: editor/editor_settings.cpp
 msgid "Help Source Font Size"
-msgstr ""
+msgstr "Yardım Kaynak Yazı Tipi Boyutu"
 
 #: editor/editor_settings.cpp
 msgid "Help Title Font Size"
-msgstr ""
+msgstr "Yardım Başlık Yazı Tipi Boyutu"
 
 #: editor/editor_settings.cpp modules/gridmap/grid_map_editor_plugin.cpp
 msgid "Grid Map"
 msgstr "Izgara Haritası"
 
 #: editor/editor_settings.cpp modules/gridmap/grid_map_editor_plugin.cpp
-#, fuzzy
 msgid "Pick Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Mesafe Seç"
 
 #: editor/editor_settings.cpp editor/plugins/tile_map_editor_plugin.cpp
-#, fuzzy
 msgid "Preview Size"
-msgstr "Önizleme"
+msgstr "Önizleme Boyutu"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Primary Grid Color"
 msgstr "Birincil Izgara Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Secondary Grid Color"
 msgstr "İkincil Izgara Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Selection Box Color"
-msgstr "Yalnızca Seçim"
+msgstr "Seçim Kutusu Rengi"
 
 #: editor/editor_settings.cpp editor/plugins/path_editor_plugin.cpp
 #: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
-#, fuzzy
 msgid "3D Gizmos"
-msgstr "Gizmolar"
+msgstr "Üç Boyutlu Gizmolar"
 
 #: editor/editor_settings.cpp editor/plugins/path_editor_plugin.cpp
 #: editor/spatial_editor_gizmos.cpp modules/csg/csg_gizmos.cpp
-#, fuzzy
 msgid "Gizmo Colors"
-msgstr "Emisyon Renkleri"
+msgstr "Gizmo Renkleri"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -5896,9 +5755,8 @@ msgstr "Örnek"
 
 #: editor/editor_settings.cpp modules/gltf/gltf_node.cpp
 #: scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Joint"
-msgstr "Nokta"
+msgstr "Eklem"
 
 #: editor/editor_settings.cpp scene/2d/collision_shape_2d.cpp
 #: scene/2d/cpu_particles_2d.cpp scene/2d/touch_screen_button.cpp
@@ -5910,112 +5768,96 @@ msgid "Shape"
 msgstr "Şekil"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Primary Grid Steps"
-msgstr "Izgara Adımı:"
+msgstr "Birincil Izgara Adımları"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Grid Size"
-msgstr "Izgara Adımı:"
+msgstr "Izgara Boyutu"
 
 #: editor/editor_settings.cpp
 msgid "Grid Division Level Max"
-msgstr ""
+msgstr "Maksimum Izgara Bölme Seviyesi"
 
 #: editor/editor_settings.cpp
 msgid "Grid Division Level Min"
-msgstr ""
+msgstr "Minimum Izgara Bölme Seviyesi"
 
 #: editor/editor_settings.cpp
 msgid "Grid Division Level Bias"
-msgstr ""
+msgstr "Izgara Bölme Seviyesi Sapması"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Grid XZ Plane"
-msgstr "IzgaraHaritası Boyama"
+msgstr "Izgara XZ Düzlemi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Grid XY Plane"
-msgstr "IzgaraHaritası Boyama"
+msgstr "Izgara XY Düzlemi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Grid YZ Plane"
-msgstr "IzgaraHaritası Boyama"
+msgstr "Izgara YZ Düzlemi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Default FOV"
-msgstr "Varsayılan"
+msgstr "Varsayılan Görüş Alanı"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Default Z Near"
-msgstr "Varsayılan tema"
+msgstr "Varsayılan Z Yakın"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Default Z Far"
-msgstr "Varsayılan"
+msgstr "Varsayılan Z Uzak"
 
 #: editor/editor_settings.cpp
 msgid "Lightmap Baking Number Of CPU Threads"
-msgstr ""
+msgstr "Işık Haritası Pişirme İş Parçacığı Sayısı"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Navigation Scheme"
-msgstr "Gezinim Kipi"
+msgstr "Navigasyon Düzeni"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Invert Y Axis"
-msgstr "Y Eksenini Düzenle"
+msgstr "Y Eksenini Çevir"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Invert X Axis"
-msgstr "X Eksenini Düzenle"
+msgstr "X Eksenini Çevir"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Zoom Style"
-msgstr "Uzaklaştır"
+msgstr "Zoom Biçimi"
 
 #: editor/editor_settings.cpp
 msgid "Emulate Numpad"
-msgstr ""
+msgstr "Sayı Tuşlarını Emüle Et"
 
 #: editor/editor_settings.cpp
 msgid "Emulate 3 Button Mouse"
-msgstr ""
+msgstr "3 Butonlu Fareyi Emüle Et"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Orbit Modifier"
-msgstr "İlk Değişiklik Tarihi'ne göre sırala"
+msgstr "Yörünge Değiştirici"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Pan Modifier"
-msgstr "Kaydırma Biçimi"
+msgstr "Kaydırma Değiştirici"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Zoom Modifier"
-msgstr "Değişti"
+msgstr "Zoom Değiştirici"
 
 #: editor/editor_settings.cpp editor/plugins/spatial_editor_plugin.cpp
 msgid "Warped Mouse Panning"
-msgstr ""
+msgstr "Çarpık Fare Kaydırması"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Navigation Feel"
-msgstr "Gezinim Kipi"
+msgstr "Navigasyon Hissi"
 
 #: editor/editor_settings.cpp
 msgid "Orbit Sensitivity"
@@ -6023,47 +5865,39 @@ msgstr "Yörünge Hassasiyeti"
 
 #: editor/editor_settings.cpp
 msgid "Orbit Inertia"
-msgstr ""
+msgstr "Yörünge Ataleti"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Translation Inertia"
-msgstr "Çeviriler"
+msgstr "Öteleme Ataleti"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Zoom Inertia"
-msgstr "Yaklaştır"
+msgstr "Zoom Ataleti"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Freelook"
-msgstr "Yukarı Serbest Bakış"
+msgstr "Serbest Bakış"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Freelook Navigation Scheme"
-msgstr "Yönlendirici Örüntüsü Oluştur"
+msgstr "Serbest Bakış Navigasyon Düzeni"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Freelook Sensitivity"
-msgstr "Sola Serbest Bakış"
+msgstr "Serbest Bakış Hassasiyeti"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Freelook Inertia"
-msgstr "Sola Serbest Bakış"
+msgstr "Serbest Bakış Ataleti"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Freelook Base Speed"
-msgstr "Serbest Bakış Hız Değiştirici"
+msgstr "Serbest Bakış Baz Hızı"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Freelook Activation Modifier"
-msgstr "Serbest Bakış Hız Değiştirici"
+msgstr "Serbest Bakış Aktivasyon Değiştirici"
 
 #: editor/editor_settings.cpp
 #, fuzzy
@@ -6071,72 +5905,64 @@ msgid "Freelook Speed Zoom Link"
 msgstr "Serbest Bakış Hız Değiştirici"
 
 #: editor/editor_settings.cpp editor/plugins/tile_map_editor_plugin.cpp
-#, fuzzy
 msgid "Grid Color"
-msgstr "Renk Seç"
+msgstr "Izgara Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Guides Color"
-msgstr "Renk Seç"
+msgstr "Kılavuz Çizgi Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Smart Snapping Line Color"
-msgstr "Akıllı Hizalama"
+msgstr "Akıllı Yapışma Satır Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Bone Width"
-msgstr ""
+msgstr "Kemik Genişliği"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Bone Color 1"
-msgstr "Renk Öğesini Yeniden Adlandır"
+msgstr "Kemik Rengi 1"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Bone Color 2"
-msgstr "Renk Öğesini Yeniden Adlandır"
+msgstr "Kemik Rengi 2"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Bone Selected Color"
-msgstr "Seçilen Profili Yapılandır:"
+msgstr "Seçilmiş Kemik Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Bone IK Color"
-msgstr ""
+msgstr "Kemik TK Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Bone Outline Color"
-msgstr ""
+msgstr "Kemik Kontur Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Bone Outline Size"
-msgstr "Kontur Boyutu:"
+msgstr "Kemik Kontur Boyutu"
 
 #: editor/editor_settings.cpp
 msgid "Viewport Border Color"
-msgstr ""
+msgstr "Çerçeve Sınır Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Constrain Editor View"
-msgstr ""
+msgstr "Düzenleyici Görünümünü Kısıtla"
 
 #: editor/editor_settings.cpp
 msgid "Simple Panning"
-msgstr ""
+msgstr "Basit Kaydırma"
 
 #: editor/editor_settings.cpp
 msgid "Scroll To Pan"
-msgstr ""
+msgstr "Kaydırmak İçin Tut"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Pan Speed"
-msgstr "Hız:"
+msgstr "Pan Yapma Hızı"
 
 #: editor/editor_settings.cpp editor/plugins/polygon_2d_editor_plugin.cpp
 #, fuzzy
@@ -6145,109 +5971,103 @@ msgstr "Çokgen 2B UV Düzenleyicisi"
 
 #: editor/editor_settings.cpp
 msgid "Point Grab Radius"
-msgstr ""
+msgstr "Nokta Yakalama Yarıçapı"
 
 #: editor/editor_settings.cpp editor/plugins/polygon_2d_editor_plugin.cpp
-#, fuzzy
 msgid "Show Previous Outline"
-msgstr "Önceki sekme"
+msgstr "Önceki Konturu Göster"
 
 #: editor/editor_settings.cpp editor/scene_tree_dock.cpp
 #, fuzzy
 msgid "Autorename Animation Tracks"
-msgstr "Animasyonu Yeniden Adlandır"
+msgstr "Animasyon İzlerini Otomatik Yeniden Adlandır"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Default Create Bezier Tracks"
-msgstr ""
+msgstr "Varsayılan Bezier İz Oluştur"
 
 #: editor/editor_settings.cpp
 #, fuzzy
 msgid "Default Create Reset Tracks"
-msgstr "RESET İz(ler)i oluşturun"
+msgstr "Varsayılan İzleri Sıfırla ve Oluştur"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Onion Layers Past Color"
-msgstr ""
+msgstr "Eski Soğan Katman Rengi"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Onion Layers Future Color"
-msgstr ""
+msgstr "Yeni Soğan Katmanı Rengi"
 
 #: editor/editor_settings.cpp
 #, fuzzy
 msgid "Visual Editors"
-msgstr "Grup Düzenleyici"
+msgstr "Görsel Editörler"
 
 #: editor/editor_settings.cpp
 msgid "Minimap Opacity"
-msgstr ""
+msgstr "Mini Harita Şeffaflığı"
 
 #: editor/editor_settings.cpp
 msgid "Window Placement"
-msgstr ""
+msgstr "Pencere Yerleşimi"
 
 #: editor/editor_settings.cpp scene/2d/back_buffer_copy.cpp scene/2d/sprite.cpp
 #: scene/2d/visibility_notifier_2d.cpp scene/3d/sprite_3d.cpp
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Rect"
-msgstr "Tam Kare"
+msgstr "Dikdörtgen"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Rect Custom Position"
-msgstr "Eğri Çıkış Konumunu Ayarla"
+msgstr "Dikdörtgen Özel Konumu"
 
 #: editor/editor_settings.cpp platform/android/export/export_plugin.cpp
 msgid "Screen"
-msgstr ""
+msgstr "Ekran"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Auto Save"
-msgstr "Otomatik Dilimle"
+msgstr "Otomatik Kaydet"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Save Before Running"
-msgstr "Çalıştırmadan önce sahneyi kaydedin..."
+msgstr "Çalıştırmadan Önce Kaydet"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Font Size"
-msgstr "Önden Görünüm"
+msgstr "Yazı Tipi Boyutu"
 
 #: editor/editor_settings.cpp
 #: modules/gdscript/language_server/gdscript_language_server.cpp
-#, fuzzy
 msgid "Remote Host"
 msgstr "Uzak Ana Bilgisayar"
 
 #: editor/editor_settings.cpp
 #: modules/gdscript/language_server/gdscript_language_server.cpp
-#, fuzzy
 msgid "Remote Port"
-msgstr "Noktayı kaldır"
+msgstr "Uzak Port"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Editor SSL Certificates"
-msgstr "Düzenleyici Ayarları"
+msgstr "Düzenleyicinin SSL Sertifikası"
 
 #: editor/editor_settings.cpp
 msgid "HTTP Proxy"
-msgstr ""
+msgstr "HTTP Proxy"
 
 #: editor/editor_settings.cpp
 msgid "Host"
-msgstr ""
+msgstr "Ana Bilgisayar"
 
 #: editor/editor_settings.cpp editor/fileserver/editor_file_server.cpp
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Port"
-msgstr ""
+msgstr "Port"
 
 #. TRANSLATORS: Project Manager here refers to the tool used to create/manage Godot projects.
 #: editor/editor_settings.cpp
@@ -6256,171 +6076,150 @@ msgstr "Proje Yöneticisi"
 
 #. TRANSLATORS: Project Manager here refers to the tool used to create/manage Godot projects.
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Sorting Order"
-msgstr "Klasör yeniden adlandırma:"
+msgstr "Sıralama Yöntemi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Symbol Color"
-msgstr ""
+msgstr "Simge Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Keyword Color"
-msgstr ""
+msgstr "Anahtar Sözcük Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Control Flow Keyword Color"
-msgstr ""
+msgstr "Akış Kontrolü Anahtar Sözcüğü Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Base Type Color"
-msgstr "Temel Tipi Değiştir"
+msgstr "Temel Tür Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Engine Type Color"
-msgstr ""
+msgstr "Motor Tür Rengi"
 
 #: editor/editor_settings.cpp
 msgid "User Type Color"
-msgstr ""
+msgstr "Üye Tür Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Comment Color"
-msgstr ""
+msgstr "Yorum Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "String Color"
-msgstr "Dosya Depolama:"
+msgstr "String Rengi"
 
 #: editor/editor_settings.cpp platform/javascript/export/export.cpp
 #: platform/uwp/export/export.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Background Color"
-msgstr "Geçersiz arkaplan rengi."
+msgstr "Arkaplan Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion Background Color"
-msgstr "Geçersiz arkaplan rengi."
+msgstr "Tamamlanma Arkaplan Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Completion Selected Color"
-msgstr "Seçileni İçe Aktar"
+msgstr "Tamamlayıcı Seçim Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Completion Existing Color"
-msgstr ""
+msgstr "Tamamlayıcı Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Completion Scroll Color"
-msgstr ""
+msgstr "Tamamlayıcı Kaydırma Çubuğu Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Completion Font Color"
-msgstr ""
+msgstr "Tamamlayıcı Yazı Tipi Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Text Color"
-msgstr "Sonraki Zemin"
+msgstr "Metin Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Line Number Color"
-msgstr "Satır Numarası:"
+msgstr "Satır Numarası Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Safe Line Number Color"
-msgstr "Satır Numarası:"
+msgstr "Güvenli Satır Numarası Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Caret Color"
-msgstr ""
+msgstr "İmleç Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Caret Background Color"
-msgstr "Geçersiz arkaplan rengi."
+msgstr "Karet Arkaplan Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Text Selected Color"
-msgstr "Seçilenleri Sil"
+msgstr "Seçili Metin Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Selection Color"
-msgstr "Yalnızca Seçim"
+msgstr "Seçim Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Brace Mismatch Color"
-msgstr ""
+msgstr "Ayraç Uyumsuz Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Current Line Color"
-msgstr "Şu anki Sahne"
+msgstr "Geçerli Satır Rengi"
 
 #: editor/editor_settings.cpp
 msgid "Line Length Guideline Color"
-msgstr ""
+msgstr "Satır Uzunluğu Sınır Çizgisi Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Word Highlighted Color"
-msgstr "Yazım Vurgulama"
+msgstr "Vurgulu Kelime Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Number Color"
-msgstr ""
+msgstr "Sayı Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Function Color"
-msgstr "Fonksiyon"
+msgstr "Fonksiyon Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Member Variable Color"
-msgstr "Değişkeni Yeniden Adlandır"
+msgstr "Üye Değişken Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Mark Color"
-msgstr "Renk Seç"
+msgstr "İşaret Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Bookmark Color"
-msgstr "Yer imleri"
+msgstr "Yer İmi Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Breakpoint Color"
-msgstr "Hata ayıklama noktaları"
+msgstr "Kesme Noktası Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Executing Line Color"
-msgstr ""
+msgstr "Yürütülen Satır Rengi"
 
 #: editor/editor_settings.cpp scene/resources/default_theme/default_theme.cpp
 msgid "Code Folding Color"
-msgstr ""
+msgstr "Kod Katlama Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Search Result Color"
-msgstr "Arama Sonuçları"
+msgstr "Arama Sonuç Rengi"
 
 #: editor/editor_settings.cpp
-#, fuzzy
 msgid "Search Result Border Color"
-msgstr "Arama Sonuçları"
+msgstr "Arama Sonuç Sınır Rengi"
 
 #: editor/editor_spin_slider.cpp
 msgid "Hold %s to round to integers. Hold Shift for more precise changes."
@@ -6429,14 +6228,12 @@ msgstr ""
 "Shift tuşuna basılı tutun."
 
 #: editor/editor_spin_slider.cpp scene/gui/button.cpp
-#, fuzzy
 msgid "Flat"
-msgstr "Sade 0"
+msgstr "Düz"
 
 #: editor/editor_spin_slider.cpp
-#, fuzzy
 msgid "Hide Slider"
-msgstr "Temas Kipi"
+msgstr "Kaydırıcıyı Gizle"
 
 #: editor/editor_sub_scene.cpp
 msgid "Select Node(s) to Import"
@@ -6729,7 +6526,7 @@ msgstr ""
 
 #: editor/fileserver/editor_file_server.cpp
 msgid "File Server"
-msgstr ""
+msgstr "Dosya Sunucusu"
 
 #: editor/fileserver/editor_file_server.cpp
 #: editor/plugins/version_control_editor_plugin.cpp
@@ -6797,6 +6594,11 @@ msgid ""
 "After renaming to an unknown extension, the file won't be shown in the "
 "editor anymore."
 msgstr ""
+"Bu dosya uzantısı editör tarafından tanınmadı.\n"
+"Yine de isimlendirmek istiyorsanız, işletim sisteminizin dosya yöneticisini "
+"kullanın.\n"
+"Bilinmeyen bir uzantı isimlendirildikten sonra dosya artık editörde "
+"görüntülenmeyecek."
 
 #: editor/filesystem_dock.cpp
 msgid ""
@@ -7097,43 +6899,41 @@ msgstr "Grupları Düzenle"
 
 #: editor/import/editor_import_collada.cpp
 msgid "Collada"
-msgstr ""
+msgstr "Collada"
 
 #: editor/import/editor_import_collada.cpp
 msgid "Use Ambient"
-msgstr ""
+msgstr "Çevreyi Kullan"
 
 #: editor/import/resource_importer_bitmask.cpp
-#, fuzzy
 msgid "Create From"
-msgstr "Klasör Oluştur"
+msgstr "Şuradan Oluştur"
 
 #: editor/import/resource_importer_bitmask.cpp
 #: servers/audio/effects/audio_effect_compressor.cpp
 msgid "Threshold"
-msgstr ""
+msgstr "Eşik"
 
 #: editor/import/resource_importer_csv_translation.cpp
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_scene.cpp
 #: editor/import/resource_importer_texture.cpp
 #: editor/import/resource_importer_wav.cpp scene/3d/gi_probe.cpp
-#, fuzzy
 msgid "Compress"
-msgstr "Bileşenler"
+msgstr "Sıkıştırma"
 
 #: editor/import/resource_importer_csv_translation.cpp
 msgid "Delimiter"
-msgstr ""
+msgstr "Sınırlayıcı"
 
 #: editor/import/resource_importer_layered_texture.cpp
-#, fuzzy
 msgid "ColorCorrect"
-msgstr "Renk işlevi."
+msgstr "ColorCorrect"
 
 #: editor/import/resource_importer_layered_texture.cpp
+#, fuzzy
 msgid "No BPTC If RGB"
-msgstr ""
+msgstr "RGB ise BPTC Yok"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp scene/2d/cpu_particles_2d.cpp
@@ -7141,31 +6941,29 @@ msgstr ""
 #: scene/resources/material.cpp scene/resources/particles_material.cpp
 #: scene/resources/texture.cpp scene/resources/visual_shader.cpp
 msgid "Flags"
-msgstr ""
+msgstr "Bayraklar"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp scene/animation/tween.cpp
 #: scene/resources/texture.cpp
 msgid "Repeat"
-msgstr ""
+msgstr "Tekrar Et"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp scene/2d/light_2d.cpp
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Filter"
-msgstr "Süzgeçler:"
+msgstr "Filtre"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp
-#, fuzzy
 msgid "Mipmaps"
-msgstr "sinyaller"
+msgstr "Mipmap'ler"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp
 msgid "Anisotropic"
-msgstr ""
+msgstr "Eşyönsüz"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: editor/import/resource_importer_texture.cpp
@@ -7173,51 +6971,43 @@ msgid "sRGB"
 msgstr "sRGB"
 
 #: editor/import/resource_importer_layered_texture.cpp
-#, fuzzy
 msgid "Slices"
-msgstr "Otomatik Dilimle"
+msgstr "Dilimler"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: scene/gui/aspect_ratio_container.cpp scene/gui/control.cpp
 #: scene/gui/nine_patch_rect.cpp scene/gui/scroll_container.cpp
 #: scene/resources/style_box.cpp
-#, fuzzy
 msgid "Horizontal"
-msgstr "Yatay:"
+msgstr "Yatay"
 
 #: editor/import/resource_importer_layered_texture.cpp
 #: scene/gui/aspect_ratio_container.cpp scene/gui/control.cpp
 #: scene/gui/nine_patch_rect.cpp scene/gui/scroll_container.cpp
 #: scene/resources/style_box.cpp
-#, fuzzy
 msgid "Vertical"
-msgstr "Dikey:"
+msgstr "Dikey"
 
 #: editor/import/resource_importer_obj.cpp
-#, fuzzy
 msgid "Generate Tangents"
-msgstr "Noktalar Oluştur"
+msgstr "Teğetler Oluştur"
 
 #: editor/import/resource_importer_obj.cpp
-#, fuzzy
 msgid "Scale Mesh"
-msgstr "Esnetme Şekli"
+msgstr "Mesh Ölçeği"
 
 #: editor/import/resource_importer_obj.cpp
-#, fuzzy
 msgid "Offset Mesh"
-msgstr "Kaydırma:"
+msgstr "Mesh Kaydırma"
 
 #: editor/import/resource_importer_obj.cpp
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Octahedral Compression"
-msgstr "İfade"
+msgstr "Octahedral Sıkıştırma"
 
 #: editor/import/resource_importer_obj.cpp
-#, fuzzy
 msgid "Optimize Mesh Flags"
-msgstr "Boyut:"
+msgstr "Örüntü Bayraklarını En İyileştir"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Import as Single Scene"
@@ -7261,53 +7051,44 @@ msgstr "Çoklu Sahneler+Materyaller olarak İçe Aktar"
 
 #: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
 #: scene/3d/physics_joint.cpp
-#, fuzzy
 msgid "Nodes"
-msgstr "Düğüm"
+msgstr "Düğümler"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Root Type"
-msgstr "Dön"
+msgstr "Kök Türü"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Root Name"
-msgstr "Uzak Depo Adı"
+msgstr "Kök İsmi"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Root Scale"
-msgstr "Ölçekle"
+msgstr "Kök Ölçeği"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Custom Script"
-msgstr "ÖzelSınıf"
+msgstr "Özel Betik"
 
 #: editor/import/resource_importer_scene.cpp scene/resources/texture.cpp
-#, fuzzy
 msgid "Storage"
-msgstr "Dosya Depolama:"
+msgstr "Depolama"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Use Legacy Names"
-msgstr ""
+msgstr "Eski İsimleri Kullan"
 
 #: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
-#, fuzzy
 msgid "Materials"
-msgstr "Materyal Değişiklikleri:"
+msgstr "Materyaller"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Keep On Reimport"
-msgstr "Yeniden İçe Aktar"
+msgstr "Yeniden İçe Aktarmaya Devam Et"
 
 #: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
-#, fuzzy
 msgid "Meshes"
-msgstr "Örgü"
+msgstr "Örgüler"
 
 #: editor/import/resource_importer_scene.cpp
 #, fuzzy
@@ -7320,42 +7101,36 @@ msgid "Light Baking"
 msgstr "Işık-Haritalarını Pişir"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Lightmap Texel Size"
-msgstr "Işık-Haritalarını Pişir"
+msgstr "Işık Haritası Texel Boyutu"
 
 #: editor/import/resource_importer_scene.cpp modules/gltf/gltf_state.cpp
 msgid "Skins"
-msgstr ""
+msgstr "Kaplamalar"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Use Named Skins"
-msgstr "Esnetme Hizalaması Kullan"
+msgstr "İsimlendirilmiş Kaplamaları Kullan"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "External Files"
-msgstr "Bir Dosya Aç"
+msgstr "Harici Dosyalar"
 
 #: editor/import/resource_importer_scene.cpp
 msgid "Store In Subdir"
-msgstr ""
+msgstr "Alt Dizine Depola"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Filter Script"
-msgstr "Betikleri Süz"
+msgstr "Betik Süz"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Keep Custom Tracks"
-msgstr "Dönüşüm"
+msgstr "Özel İzleri Tut"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Optimizer"
-msgstr "İyileştir"
+msgstr "En İyileştirici"
 
 #: editor/import/resource_importer_scene.cpp
 #: editor/plugins/item_list_editor_plugin.cpp main/main.cpp
@@ -7374,36 +7149,30 @@ msgid "Enabled"
 msgstr "Etkin"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Max Linear Error"
-msgstr "Maks. Doğrusal Hata:"
+msgstr "Maksimum Doğrusal Hata"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Max Angular Error"
-msgstr "Maks. Açısal Hata:"
+msgstr "Maksimum Açısal Hata"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Max Angle"
-msgstr "Değer"
+msgstr "Maksimum Açı"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Remove Unused Tracks"
-msgstr "Animasyon İzini Kaldır"
+msgstr "Kullanılmayan İzleri Kaldır"
 
 #: editor/import/resource_importer_scene.cpp
-#, fuzzy
 msgid "Clips"
-msgstr "Animasyon Klipleri"
+msgstr "Klipler"
 
 #: editor/import/resource_importer_scene.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/particles_2d.cpp scene/3d/area.cpp scene/3d/cpu_particles.cpp
 #: scene/3d/particles.cpp scene/resources/environment.cpp
-#, fuzzy
 msgid "Amount"
-msgstr "Değer:"
+msgstr "Miktar"
 
 #: editor/import/resource_importer_scene.cpp
 #: editor/plugins/mesh_library_editor_plugin.cpp
@@ -7456,28 +7225,30 @@ msgid ""
 msgstr ""
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid ""
 "%s: Texture detected as used in 3D. Enabling filter, repeat, mipmap "
 "generation and VRAM texture compression."
 msgstr ""
+"%s: Dokunun 3B olarak kullanıldığı tespit edildi. Filtreleme, tekrarlama, "
+"mipmap oluşturma ve VRAM doku sıkıştırma etkileştiriliyor."
 
 #: editor/import/resource_importer_texture.cpp
 msgid "2D, Detect 3D"
-msgstr ""
+msgstr "2D, 3D Algıla"
 
 #: editor/import/resource_importer_texture.cpp
-#, fuzzy
 msgid "2D Pixel"
-msgstr "Şekil Pikselleri"
+msgstr "2D Pixel"
 
 #: editor/import/resource_importer_texture.cpp scene/resources/texture.cpp
+#, fuzzy
 msgid "Lossy Quality"
-msgstr ""
+msgstr "Kayıplı Kalite"
 
 #: editor/import/resource_importer_texture.cpp
-#, fuzzy
 msgid "HDR Mode"
-msgstr "Kip Seç"
+msgstr "HDR Modu"
 
 #: editor/import/resource_importer_texture.cpp
 msgid "BPTC LDR"
@@ -7487,8 +7258,9 @@ msgstr ""
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/cpu_particles_2d.cpp
 #: scene/2d/mesh_instance_2d.cpp scene/2d/multimesh_instance_2d.cpp
 #: scene/2d/particles_2d.cpp scene/2d/sprite.cpp scene/resources/style_box.cpp
+#, fuzzy
 msgid "Normal Map"
-msgstr ""
+msgstr "Normal Haritası"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
@@ -7496,27 +7268,28 @@ msgid "Process"
 msgstr "Rötuş"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid "Fix Alpha Border"
-msgstr ""
+msgstr "Alfa Sınırını Düzelt"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
 msgid "Premult Alpha"
-msgstr "Çokluyu Düzenleyin"
+msgstr "İlk Alfa"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid "Hdr As Srgb"
-msgstr ""
+msgstr "SRGB Olarak HDR"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
 msgid "Invert Color"
-msgstr "Köşe"
+msgstr "Rengi Ters Çevir"
 
 #: editor/import/resource_importer_texture.cpp
-#, fuzzy
 msgid "Normal Map Invert Y"
-msgstr "Rastgele Ölçek:"
+msgstr "Normal Haritası Y Eksenini Ters Çevir"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
@@ -7524,89 +7297,89 @@ msgid "Size Limit"
 msgstr "Boyut Limiti"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid "Detect 3D"
-msgstr ""
+msgstr "3D Algıla"
 
 #: editor/import/resource_importer_texture.cpp
 #, fuzzy
 msgid "SVG"
-msgstr "HSV"
+msgstr "SVG"
 
 #: editor/import/resource_importer_texture.cpp
+#, fuzzy
 msgid ""
 "Warning, no suitable PC VRAM compression enabled in Project Settings. This "
 "texture will not display correctly on PC."
 msgstr ""
+"Uyarı, proje ayarlarında uygun PC VRAM sıkıştırması etkin değil. Bu doku "
+"PC'de düzgün görüntülenmez."
 
 #: editor/import/resource_importer_texture_atlas.cpp
-#, fuzzy
 msgid "Atlas File"
-msgstr "Kontur Boyutu:"
+msgstr "Atlas Dosyası"
 
 #: editor/import/resource_importer_texture_atlas.cpp
-#, fuzzy
 msgid "Import Mode"
-msgstr "Dışa Aktarma Biçimi:"
+msgstr "İçe Aktarım Modu"
 
 #: editor/import/resource_importer_texture_atlas.cpp
 #, fuzzy
 msgid "Crop To Region"
-msgstr "Döşeme Bölgesi Ata"
+msgstr "Bölgeye Kırp"
 
 #: editor/import/resource_importer_texture_atlas.cpp
 msgid "Trim Alpha Border From Region"
-msgstr ""
+msgstr "Alfa Sınırını Bölgeden Kırp"
 
 #: editor/import/resource_importer_wav.cpp scene/2d/physics_body_2d.cpp
 #, fuzzy
 msgid "Force"
-msgstr "Zorla Gönder"
+msgstr "Zorla"
 
 #: editor/import/resource_importer_wav.cpp
 msgid "8 Bit"
-msgstr ""
+msgstr "8 Bit"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
+#, fuzzy
 msgid "Mono"
-msgstr ""
+msgstr "Tek"
 
 #: editor/import/resource_importer_wav.cpp
 #, fuzzy
 msgid "Max Rate"
-msgstr "Düğümü Çırp"
+msgstr "Maximum Oran"
 
 #: editor/import/resource_importer_wav.cpp
 #, fuzzy
 msgid "Max Rate Hz"
-msgstr "Düğümü Çırp"
+msgstr "Maximum Hz Oranı"
 
 #: editor/import/resource_importer_wav.cpp
 msgid "Trim"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp
-#, fuzzy
 msgid "Normalize"
-msgstr "Biçem"
+msgstr "Normalleştir"
 
 #: editor/import/resource_importer_wav.cpp
 #: scene/resources/audio_stream_sample.cpp
-#, fuzzy
 msgid "Loop Mode"
-msgstr "Biçimi Taşı"
+msgstr "Döngü Modu"
 
 #: editor/import/resource_importer_wav.cpp
 #: scene/resources/audio_stream_sample.cpp
-#, fuzzy
 msgid "Loop Begin"
-msgstr "Biçimi Taşı"
+msgstr "Döngü Başlangıcı"
 
 #: editor/import/resource_importer_wav.cpp
 #: scene/resources/audio_stream_sample.cpp
-#, fuzzy
 msgid "Loop End"
-msgstr "Biçimi Taşı"
+msgstr "Döngü Sonu"
 
 #: editor/import_defaults_editor.cpp
 msgid "Select Importer"
@@ -7686,27 +7459,24 @@ msgid "Failed to load resource."
 msgstr "Kaynak yükleme başarısız oldu."
 
 #: editor/inspector_dock.cpp
-#, fuzzy
 msgid "Property Name Style"
-msgstr "Proje Adı:"
+msgstr "Özellik İsim Biçimi"
 
 #: editor/inspector_dock.cpp scene/gui/color_picker.cpp
 msgid "Raw"
 msgstr "Ham"
 
 #: editor/inspector_dock.cpp
-#, fuzzy
 msgid "Capitalized"
-msgstr "Büyük harfe çevirme"
+msgstr "Büyük Harfe Çevrilmiş"
 
 #: editor/inspector_dock.cpp
-#, fuzzy
 msgid "Localized"
-msgstr "Yerel"
+msgstr "Yerelleştirilmiş"
 
 #: editor/inspector_dock.cpp
 msgid "Localization not available for current language."
-msgstr ""
+msgstr "Geçerli dil için yerelleştirme mevcut değil."
 
 #: editor/inspector_dock.cpp
 msgid "Copy Properties"
@@ -8247,9 +8017,8 @@ msgid "New"
 msgstr "Yeni"
 
 #: editor/plugins/animation_player_editor_plugin.cpp
-#, fuzzy
 msgid "Paste As Reference"
-msgstr "%s Class referansı"
+msgstr "Referans. Olarak Yapıştır"
 
 #: editor/plugins/animation_player_editor_plugin.cpp
 msgid "Edit Transitions..."
@@ -8581,7 +8350,7 @@ msgstr "Süzgeçler..."
 
 #: editor/plugins/asset_library_editor_plugin.cpp scene/main/http_request.cpp
 msgid "Use Threads"
-msgstr ""
+msgstr "Thread'leri Kullan"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
 msgid "Contents:"
@@ -8708,9 +8477,8 @@ msgid "Download Error"
 msgstr "İndirme Hatası"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
-#, fuzzy
 msgid "Available URLs"
-msgstr "Kullanılabilir Profiller:"
+msgstr "Uygun URL'ler"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
 msgid "Download for this asset is already in progress!"
@@ -8745,25 +8513,21 @@ msgid "Loading..."
 msgstr "Yükle..."
 
 #: editor/plugins/asset_library_editor_plugin.cpp
-#, fuzzy
 msgctxt "Pagination"
 msgid "First"
 msgstr "İlk"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
-#, fuzzy
 msgctxt "Pagination"
 msgid "Previous"
 msgstr "Önceki"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
-#, fuzzy
 msgctxt "Pagination"
 msgid "Next"
 msgstr "Sonraki"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
-#, fuzzy
 msgctxt "Pagination"
 msgid "Last"
 msgstr "Son"
@@ -8813,8 +8577,9 @@ msgid "Testing"
 msgstr "Deneme"
 
 #: editor/plugins/asset_library_editor_plugin.cpp
+#, fuzzy
 msgid "Failed to get repository configuration."
-msgstr ""
+msgstr "Depo yapılandırması alınamadı."
 
 #: editor/plugins/asset_library_editor_plugin.cpp
 msgid "Assets ZIP File"
@@ -8871,8 +8636,9 @@ msgid "Bake Lightmaps"
 msgstr "Işık-Haritalarını Pişir"
 
 #: editor/plugins/baked_lightmap_editor_plugin.cpp
+#, fuzzy
 msgid "LightMap Bake"
-msgstr ""
+msgstr "Işık Haritasını Pişir"
 
 #: editor/plugins/baked_lightmap_editor_plugin.cpp
 msgid "Select lightmap bake file:"
@@ -9378,23 +9144,21 @@ msgid "View"
 msgstr "Görüş"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
-#, fuzzy
 msgid "Show"
-msgstr "Izgarayı Göster"
+msgstr "Göster"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
-#, fuzzy
 msgid "Show When Snapping"
-msgstr "Akıllı Hizalama"
+msgstr "Yapışırken Göster"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 msgid "Hide"
-msgstr ""
+msgstr "Gizle"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 #, fuzzy
 msgid "Toggle Grid"
-msgstr "Aç / Kapat Biçimi"
+msgstr "Izgarayı Aç/Kapat"
 
 #: editor/plugins/canvas_item_editor_plugin.cpp
 #: editor/plugins/polygon_2d_editor_plugin.cpp
@@ -9745,16 +9509,15 @@ msgstr "Renk Geçişi Düzenlendi"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
 msgid "Swap GradientTexture2D Fill Points"
-msgstr ""
+msgstr "GradientTexture2D Dolgu Noktalarını Değiştir"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
 msgid "Swap Gradient Fill Points"
-msgstr ""
+msgstr "Gradient Doldurma Noktalarını Değiştir"
 
 #: editor/plugins/gradient_texture_2d_editor_plugin.cpp
-#, fuzzy
 msgid "Toggle Grid Snap"
-msgstr "Aç / Kapat Biçimi"
+msgstr "Snap Aç/Kapat"
 
 #: editor/plugins/item_list_editor_plugin.cpp editor/project_export.cpp
 #: scene/3d/label_3d.cpp scene/gui/button.cpp scene/gui/dialogs.cpp
@@ -9777,9 +9540,8 @@ msgstr ""
 
 #: editor/plugins/item_list_editor_plugin.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Separator"
-msgstr "Ayrım:"
+msgstr "Ayraç"
 
 #: editor/plugins/item_list_editor_plugin.cpp
 msgid "Item %d"
@@ -10013,9 +9775,8 @@ msgstr ""
 "%s"
 
 #: editor/plugins/mesh_library_editor_plugin.cpp
-#, fuzzy
 msgid "MeshLibrary"
-msgstr "Model Kütüphanesi"
+msgstr ""
 
 #: editor/plugins/mesh_library_editor_plugin.cpp
 msgid "Add Item"
@@ -10038,14 +9799,12 @@ msgid "Update from Scene"
 msgstr "Sahneden Güncelle"
 
 #: editor/plugins/mesh_library_editor_plugin.cpp
-#, fuzzy
 msgid "Apply without Transforms"
-msgstr "MeshInstance dönüşümlerini uygula"
+msgstr "Dönüşümler olmadan uygula"
 
 #: editor/plugins/mesh_library_editor_plugin.cpp
-#, fuzzy
 msgid "Apply with Transforms"
-msgstr "MeshInstance dönüşümlerini uygula"
+msgstr "Dönüşümlerle uygula"
 
 #: editor/plugins/multimesh_editor_plugin.cpp
 msgid "No mesh source specified (and no MultiMesh set in node)."
@@ -10211,9 +9970,8 @@ msgid "Volume"
 msgstr "Oylum"
 
 #: editor/plugins/particles_editor_plugin.cpp
-#, fuzzy
 msgid "Emission Source:"
-msgstr "Emisyon Kaynağı:"
+msgstr "Emission Kaynağı:"
 
 #: editor/plugins/particles_editor_plugin.cpp
 msgid "A processor material of type 'ParticlesMaterial' is required."
@@ -10569,7 +10327,7 @@ msgstr "Kemikleri Çokgene Eşleştir"
 
 #: editor/plugins/ray_cast_2d_editor_plugin.cpp
 msgid "Set cast_to"
-msgstr ""
+msgstr "cast_to ayarla"
 
 #: editor/plugins/resource_preloader_editor_plugin.cpp
 msgid "ERROR: Couldn't load resource!"
@@ -10899,12 +10657,13 @@ msgid "Search Results"
 msgstr "Arama Sonuçları"
 
 #: editor/plugins/script_editor_plugin.cpp
+#, fuzzy
 msgid "Open Dominant Script On Scene Change"
-msgstr ""
+msgstr "Sahne Değişiminde Baskın Betiği Aç"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "External"
-msgstr ""
+msgstr "Harici"
 
 #: editor/plugins/script_editor_plugin.cpp
 #, fuzzy
@@ -10922,17 +10681,17 @@ msgid "Script Temperature Enabled"
 msgstr "Şablon Dosyası Seç"
 
 #: editor/plugins/script_editor_plugin.cpp
+#, fuzzy
 msgid "Highlight Current Script"
-msgstr ""
+msgstr "Geçerli Betiği Vurgula"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Script Temperature History Size"
 msgstr ""
 
 #: editor/plugins/script_editor_plugin.cpp
-#, fuzzy
 msgid "Current Script Background Color"
-msgstr "Geçersiz arkaplan rengi."
+msgstr "Mevcut Komut Dizisi Arkaplan Rengi"
 
 #: editor/plugins/script_editor_plugin.cpp
 #, fuzzy
@@ -10945,9 +10704,8 @@ msgid "Sort Scripts By"
 msgstr "Betik Oluştur"
 
 #: editor/plugins/script_editor_plugin.cpp
-#, fuzzy
 msgid "List Script Names As"
-msgstr "Betik Adı:"
+msgstr "Script İsimlerini Listele"
 
 #: editor/plugins/script_editor_plugin.cpp
 msgid "Exec Flags"
@@ -11210,7 +10968,7 @@ msgstr "Oynat IK"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 msgid "Orthogonal"
-msgstr "Dikey"
+msgstr "Dik Açılı"
 
 #: editor/plugins/spatial_editor_plugin.cpp modules/gltf/gltf_camera.cpp
 msgid "Perspective"
@@ -11764,12 +11522,14 @@ msgid "Post"
 msgstr "Sonrası"
 
 #: editor/plugins/spatial_editor_plugin.cpp
+#, fuzzy
 msgid "Manipulator Gizmo Size"
-msgstr ""
+msgstr "Gizmo Boyutu Ayarlayıcı"
 
 #: editor/plugins/spatial_editor_plugin.cpp
+#, fuzzy
 msgid "Manipulator Gizmo Opacity"
-msgstr ""
+msgstr "Gizmo Şeffaflığı Ayarlayıcı"
 
 #: editor/plugins/spatial_editor_plugin.cpp
 #, fuzzy
@@ -11932,9 +11692,8 @@ msgid "New Animation"
 msgstr "Yeni Animasyon"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
-#, fuzzy
 msgid "Filter animations"
-msgstr "Metotları filtrele"
+msgstr "Animasyonları filtrele"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Speed:"
@@ -12416,7 +12175,7 @@ msgstr "Tür Ekle"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Filter the list of types or create a new custom type:"
-msgstr "Tip listesini süz veya yeni bir özel tip oluştur."
+msgstr "Tip listesini filtrele veya yeni bir özel tip oluştur:"
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Available Node-based types:"
@@ -12485,14 +12244,18 @@ msgid "Override all default type items."
 msgstr "Tüm varsayılan tür öğelerini geçersiz kıl."
 
 #: editor/plugins/theme_editor_plugin.cpp
+#, fuzzy
 msgid "Select the variation base type from a list of available types."
-msgstr ""
+msgstr "Kullanılabilir tipler listesinden temel varyasyon tipini seçin."
 
 #: editor/plugins/theme_editor_plugin.cpp
+#, fuzzy
 msgid ""
 "A type associated with a built-in class cannot be marked as a variation of "
 "another type."
 msgstr ""
+"Yerleşik sınıfla ilişkili bir tür başka bir türün varyasyonu olarak "
+"belirlenemez."
 
 #: editor/plugins/theme_editor_plugin.cpp
 msgid "Theme:"
@@ -12738,7 +12501,7 @@ msgstr "TileMap'i Boya"
 #: editor/plugins/tile_map_editor_plugin.cpp
 #: modules/gridmap/grid_map_editor_plugin.cpp
 msgid "Palette Min Width"
-msgstr ""
+msgstr "Palet Minimum Genişliği"
 
 #: editor/plugins/tile_map_editor_plugin.cpp
 #, fuzzy
@@ -13132,9 +12895,8 @@ msgstr "Hizalama Ayarları"
 #: scene/gui/graph_node.cpp scene/gui/rich_text_effect.cpp
 #: scene/main/canvas_layer.cpp scene/resources/material.cpp
 #: scene/resources/particles_material.cpp scene/resources/style_box.cpp
-#, fuzzy
 msgid "Offset"
-msgstr "Kaydırma:"
+msgstr "Kaydırma"
 
 #: editor/plugins/tile_set_editor_plugin.cpp editor/rename_dialog.cpp
 #: scene/gui/range.cpp scene/resources/animation.cpp
@@ -13145,9 +12907,8 @@ msgstr "Adım"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Separation"
-msgstr "Ayrım:"
+msgstr "Ayrım"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 #, fuzzy
@@ -13168,14 +12929,13 @@ msgstr "Yazı"
 #: editor/plugins/tile_set_editor_plugin.cpp
 #, fuzzy
 msgid "Tex Offset"
-msgstr "Izgarayı Kaydır:"
+msgstr "Izgarayı Kaydır"
 
 #: editor/plugins/tile_set_editor_plugin.cpp modules/csg/csg_shape.cpp
 #: scene/2d/canvas_item.cpp scene/2d/particles_2d.cpp
 #: scene/3d/mesh_instance.cpp scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Material"
-msgstr "Materyal Değişiklikleri:"
+msgstr "Materyal"
 
 #: editor/plugins/tile_set_editor_plugin.cpp scene/2d/canvas_item.cpp
 #: scene/3d/label_3d.cpp scene/3d/sprite_3d.cpp scene/resources/style_box.cpp
@@ -13194,9 +12954,8 @@ msgid "Autotile Bitmask Mode"
 msgstr "Bitmask Kipi"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
-#, fuzzy
 msgid "Subtile Size"
-msgstr "Kontur Boyutu:"
+msgstr "Alt Döşeme Boyutu"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 #, fuzzy
@@ -13214,9 +12973,8 @@ msgid "Navigation Offset"
 msgstr "Gezinim Kipi"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
-#, fuzzy
 msgid "Shape Offset"
-msgstr "Kaydırma:"
+msgstr "Şekil Kaydırması"
 
 #: editor/plugins/tile_set_editor_plugin.cpp
 #, fuzzy
@@ -14332,11 +14090,14 @@ msgstr "Koşturulabilir"
 
 #: editor/project_export.cpp
 msgid "Export the project for all the presets defined."
-msgstr ""
+msgstr "Tanımlanan tüm ön ayarlar için projeyi dışa aktarın."
 
 #: editor/project_export.cpp
+#, fuzzy
 msgid "All presets must have an export path defined for Export All to work."
 msgstr ""
+"Bütün ön ayarlar Hepsini Dışa Aktar işlemi için bir dışa aktarım dizinine "
+"sahip olmalıdır."
 
 #: editor/project_export.cpp
 msgid "Delete preset '%s'?"
@@ -14446,10 +14207,13 @@ msgid "GDScript Encryption Key (256-bits as hexadecimal):"
 msgstr "GDScript Şifreleme Anahtarı (On altılı sayı sisteminde 256-bit):"
 
 #: editor/project_export.cpp
+#, fuzzy
 msgid ""
 "Note: Encryption key needs to be stored in the binary,\n"
 "you need to build the export templates from source."
 msgstr ""
+"Not: Şifreleme anahtarının iki sayı sistemi olarak saklanması gerekir,\n"
+"kaynaktan dışa aktarım şablonlarınızı derlemelisiniz."
 
 #: editor/project_export.cpp
 #, fuzzy
@@ -14457,28 +14221,24 @@ msgid "More Info..."
 msgstr "Şuraya Taşı..."
 
 #: editor/project_export.cpp
-#, fuzzy
 msgid "Export PCK/Zip..."
-msgstr "PCK/Zip Dışa Aktar"
+msgstr "PCK/Zip Dışa Aktar..."
 
 #: editor/project_export.cpp
-#, fuzzy
 msgid "Export Project..."
-msgstr "Projeyi Dışa Aktar"
+msgstr "Projeyi Dışa Aktar..."
 
 #: editor/project_export.cpp
 msgid "Export All"
 msgstr "Tümünü Dışa Aktar"
 
 #: editor/project_export.cpp
-#, fuzzy
 msgid "Choose an export mode:"
-msgstr "Lütfen boş bir klasör seçin."
+msgstr "Bir dışa aktarım modu seç:"
 
 #: editor/project_export.cpp
-#, fuzzy
 msgid "Export All..."
-msgstr "Tümünü Dışa Aktar"
+msgstr "Tümünü Dışa Aktar..."
 
 #: editor/project_export.cpp editor/project_manager.cpp
 msgid "ZIP File"
@@ -15600,19 +15360,20 @@ msgstr ""
 msgid "Make Local"
 msgstr "Yerelleştir"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
+msgstr "Sahne Benzersiz İsmini Etkin Kıl"
 
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
-msgstr "Düğüm adı:"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Başka bir düğüm sahnede bu benzersiz adı zaten kullanıyor."
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
-msgstr "Düğüm adı:"
+msgid "Disable Scene Unique Name(s)"
+msgstr "Sahne Benzersiz İsmini Etkisiz Kıl"
 
 #: editor/scene_tree_dock.cpp
 msgid "New Scene Root"
@@ -15790,8 +15551,9 @@ msgid "Show Scene Tree Root Selection"
 msgstr "Merkez Seçimi"
 
 #: editor/scene_tree_dock.cpp
+#, fuzzy
 msgid "Derive Script Globals By Name"
-msgstr ""
+msgstr "Ada Göre Betik Globallerini Türet"
 
 #: editor/scene_tree_dock.cpp
 #, fuzzy
@@ -15811,6 +15573,10 @@ msgid "Button Group"
 msgstr "Düğme Grubu"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "Sahne Benzersiz İsmini Etkisiz Kıl"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Gelen Bağlantı)"
 
@@ -15819,11 +15585,15 @@ msgid "Node configuration warning:"
 msgstr "Düğüm yapılandırma uyarısı:"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid ""
 "This node can be accessed from within anywhere in the scene by preceding it "
 "with the '%s' prefix in a node path.\n"
 "Click to disable this."
 msgstr ""
+"Bu düğüme, bir düğüm adresinde önüne '%s' ön eki koyarak sahnenin herhangi "
+"bir yerinden erişilebilir.\n"
+"Bunu devre dışı bırakmak için tıklayın."
 
 #: editor/scene_tree_editor.cpp
 msgid ""
@@ -15886,6 +15656,11 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Geçersiz düğüm adı, aşağıdaki karakterlere izin verilmiyor:"
 
 #: editor/scene_tree_editor.cpp
+#, fuzzy
+msgid "Another node already uses this unique name in the scene."
+msgstr "Başka bir düğüm sahnede bu benzersiz adı zaten kullanıyor."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Düğümü Yeniden Adlandır"
 
@@ -16115,16 +15890,19 @@ msgid "Filter stack variables"
 msgstr "Döşemelerde Bul"
 
 #: editor/script_editor_debugger.cpp
+#, fuzzy
 msgid "Auto Switch To Remote Scene Tree"
-msgstr ""
+msgstr "Uzak Sahne Ağacına Otomatik Geçiş"
 
 #: editor/script_editor_debugger.cpp
+#, fuzzy
 msgid "Remote Scene Tree Refresh Interval"
-msgstr ""
+msgstr "Uzak Sahne Ağacı Yenileme Sıklığı"
 
 #: editor/script_editor_debugger.cpp
+#, fuzzy
 msgid "Remote Inspect Refresh Interval"
-msgstr ""
+msgstr "Uzaktan İnceleme Yenileme Aralığı"
 
 #: editor/script_editor_debugger.cpp
 msgid "Network Profiler"
@@ -16232,7 +16010,7 @@ msgstr "AudioStreamPlayer3D Emisyon Açısı Değişimi"
 #: platform/osx/export/export.cpp
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Camera"
-msgstr ""
+msgstr "Kamera"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Change Camera FOV"
@@ -16243,8 +16021,9 @@ msgid "Change Camera Size"
 msgstr "Kamera Boyutunu Değiştir"
 
 #: editor/spatial_editor_gizmos.cpp
+#, fuzzy
 msgid "Visibility Notifier"
-msgstr ""
+msgstr "Görünürlük Bildiricisi"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Change Notifier AABB"
@@ -16374,8 +16153,9 @@ msgid "Occluder"
 msgstr "Örtü Kipi"
 
 #: editor/spatial_editor_gizmos.cpp
+#, fuzzy
 msgid "Set Occluder Sphere Radius"
-msgstr "Engelleyici Silindir Yarıçapını Ayarla"
+msgstr "Engelleyici Küre Yarıçapını Ayarla"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Set Occluder Sphere Position"
@@ -16407,8 +16187,9 @@ msgid "Occluder Hole"
 msgstr "Engelleyici Çokgeni Oluştur"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Godot Physics"
-msgstr ""
+msgstr "Godot Fiziği"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_sw.cpp
 #: servers/visual/visual_server_scene.cpp
@@ -16441,32 +16222,35 @@ msgid "Debugger stdout"
 msgstr "Hata Ayıklayıcı"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Max Chars Per Second"
-msgstr ""
+msgstr "Saniye başı maksimum karakter sayısı"
 
 #: main/main.cpp
 msgid "Max Messages Per Frame"
-msgstr ""
+msgstr "Kare Başına Maksimum Mesaj"
 
 #: main/main.cpp
 msgid "Max Errors Per Second"
-msgstr ""
+msgstr "Saniye Başına Maksimum Hata"
 
 #: main/main.cpp
 msgid "Max Warnings Per Second"
-msgstr ""
+msgstr "Saniye Başına Maksimum Uyarı"
 
 #: main/main.cpp
 msgid "Flush stdout On Print"
 msgstr ""
 
 #: main/main.cpp servers/visual_server.cpp
+#, fuzzy
 msgid "Logging"
-msgstr ""
+msgstr "Kayıt tutma"
 
 #: main/main.cpp
+#, fuzzy
 msgid "File Logging"
-msgstr ""
+msgstr "Dosya Kaaydı Tutma"
 
 #: main/main.cpp
 #, fuzzy
@@ -16480,16 +16264,15 @@ msgstr "Dosya Yolunu Kopyala"
 
 #: main/main.cpp
 msgid "Max Log Files"
-msgstr ""
+msgstr "Maksimum Kayıt Dosyası"
 
 #: main/main.cpp
 msgid "Driver"
-msgstr ""
+msgstr "Sürücü"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Driver Name"
-msgstr "Betik Adı:"
+msgstr "Sürücü Adı"
 
 #: main/main.cpp
 msgid "Fallback To GLES2"
@@ -16500,8 +16283,9 @@ msgid "Use Nvidia Rect Flicker Workaround"
 msgstr ""
 
 #: main/main.cpp
+#, fuzzy
 msgid "DPI"
-msgstr ""
+msgstr "DPI"
 
 #: main/main.cpp
 msgid "Allow hiDPI"
@@ -16518,16 +16302,18 @@ msgid "Use V-Sync"
 msgstr "Yapışma Kullan"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Per Pixel Transparency"
-msgstr ""
+msgstr "Piksel Başına Şeffaflık"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Allowed"
-msgstr ""
+msgstr "İzin Verildi"
 
 #: main/main.cpp
 msgid "Intended Usage"
-msgstr ""
+msgstr "Kullanım Amacı"
 
 #: main/main.cpp
 #, fuzzy
@@ -16541,7 +16327,7 @@ msgstr "Kaydedilirken hata"
 
 #: main/main.cpp
 msgid "Threads"
-msgstr ""
+msgstr "İş parçacıkları"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_wrap_mt.h
 #, fuzzy
@@ -16585,8 +16371,9 @@ msgstr ""
 #: main/main.cpp scene/gui/item_list.cpp scene/gui/popup_menu.cpp
 #: scene/gui/scroll_container.cpp scene/gui/text_edit.cpp scene/gui/tree.cpp
 #: scene/main/viewport.cpp scene/register_scene_types.cpp
+#, fuzzy
 msgid "GUI"
-msgstr ""
+msgstr "Grafiksel Kullanıcı Arayüzü"
 
 #: main/main.cpp
 msgid "Drop Mouse On GUI Input Disabled"
@@ -16597,8 +16384,9 @@ msgid "stdout"
 msgstr ""
 
 #: main/main.cpp
+#, fuzzy
 msgid "Print FPS"
-msgstr ""
+msgstr "Saniyedeki kare sayısını(FPS) yazdır"
 
 #: main/main.cpp
 msgid "Verbose stdout"
@@ -16620,8 +16408,9 @@ msgid "Frame Delay Msec"
 msgstr "Çerçeve Seçimi"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Low Processor Mode"
-msgstr ""
+msgstr "Düşük İşlemci Modu"
 
 #: main/main.cpp
 msgid "Delta Sync After Draw"
@@ -16646,8 +16435,9 @@ msgid "Pointing"
 msgstr "Nokta"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Touch Delay"
-msgstr ""
+msgstr "Dokunma Gecikmesi"
 
 #: main/main.cpp servers/visual_server.cpp
 msgid "GLES3"
@@ -16671,8 +16461,9 @@ msgid "Environment"
 msgstr "Ortamı Göster"
 
 #: main/main.cpp
+#, fuzzy
 msgid "Default Clear Color"
-msgstr ""
+msgstr "Varsayılan Temizleme Rengi"
 
 #: main/main.cpp
 msgid "Boot Splash"
@@ -16685,16 +16476,15 @@ msgstr "Kemikleri Göster"
 
 #: main/main.cpp
 msgid "Image"
-msgstr ""
+msgstr "Görüntü"
 
 #: main/main.cpp
 msgid "Fullsize"
-msgstr ""
+msgstr "Tam boyut"
 
 #: main/main.cpp scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Use Filter"
-msgstr "Süzgeç:"
+msgstr "Filtre Kullan"
 
 #: main/main.cpp scene/resources/style_box.cpp
 #, fuzzy
@@ -16741,9 +16531,8 @@ msgid "Custom Image Hotspot"
 msgstr ""
 
 #: main/main.cpp
-#, fuzzy
 msgid "Tooltip Position Offset"
-msgstr "Dönme Kayması:"
+msgstr "Araç İpucu Pozisyon Kaydırması"
 
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
 #, fuzzy
@@ -16756,9 +16545,8 @@ msgid "Wait For Debugger"
 msgstr "Hata Ayıklayıcı"
 
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
-#, fuzzy
 msgid "Wait Timeout"
-msgstr "Zaman aşımı."
+msgstr "Bekleme Zaman Aşımı"
 
 #: main/main.cpp
 msgid "Runtime"
@@ -16873,14 +16661,12 @@ msgstr "Büyük/Küçük Harf Dönüştür"
 #: scene/resources/cylinder_shape.cpp scene/resources/environment.cpp
 #: scene/resources/navigation_mesh.cpp scene/resources/primitive_meshes.cpp
 #: scene/resources/sphere_shape.cpp
-#, fuzzy
 msgid "Radius"
-msgstr "Yarıçap:"
+msgstr "Yarıçap"
 
 #: modules/csg/csg_shape.cpp scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Radial Segments"
-msgstr "Ana Sahne Değiştirgenleri:"
+msgstr "Radyal Dilimler"
 
 #: modules/csg/csg_shape.cpp scene/resources/primitive_meshes.cpp
 #, fuzzy
@@ -16949,9 +16735,8 @@ msgid "Path Simplify Angle"
 msgstr ""
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Path Rotation"
-msgstr "Rastgele Döndürme:"
+msgstr "Yol Rotasyonu"
 
 #: modules/csg/csg_shape.cpp
 #, fuzzy
@@ -16964,9 +16749,8 @@ msgid "Path Continuous U"
 msgstr "Sürekli"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Path U Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Yol U Mesafesi"
 
 #: modules/csg/csg_shape.cpp
 #, fuzzy
@@ -17019,9 +16803,8 @@ msgid "Use FBX"
 msgstr ""
 
 #: modules/gdnative/gdnative.cpp
-#, fuzzy
 msgid "Config File"
-msgstr "Dosya Depolama:"
+msgstr "Konfigürasyon Dosyası"
 
 #: modules/gdnative/gdnative.cpp
 #, fuzzy
@@ -17037,7 +16820,7 @@ msgstr "İskelet"
 #: modules/gdnative/gdnative.cpp
 #, fuzzy
 msgid "Symbol Prefix"
-msgstr "Ön Ek:"
+msgstr "Sembol Ön Eki"
 
 #: modules/gdnative/gdnative.cpp
 #, fuzzy
@@ -17099,14 +16882,12 @@ msgid "Libraries:"
 msgstr "Kütüphaneler:"
 
 #: modules/gdnative/nativescript/nativescript.cpp
-#, fuzzy
 msgid "Class Name"
-msgstr "Sınıf İsmi:"
+msgstr "Sınıf İsmi"
 
 #: modules/gdnative/nativescript/nativescript.cpp
-#, fuzzy
 msgid "Script Class"
-msgstr "Betik Adı:"
+msgstr "Betik Sınıfı"
 
 #: modules/gdnative/nativescript/nativescript.cpp
 #, fuzzy
@@ -17185,9 +16966,8 @@ msgid "Object can't provide a length."
 msgstr "Nesne bir uzunluk sağlayamaz."
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
-#, fuzzy
 msgid "Language Server"
-msgstr "Dil:"
+msgstr "Dil Sunucusu"
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
 #, fuzzy
@@ -17216,9 +16996,8 @@ msgid "Buffer View"
 msgstr "Arkadan Görünüm"
 
 #: modules/gltf/gltf_accessor.cpp modules/gltf/gltf_buffer_view.cpp
-#, fuzzy
 msgid "Byte Offset"
-msgstr "Izgarayı Kaydır:"
+msgstr ""
 
 #: modules/gltf/gltf_accessor.cpp
 #, fuzzy
@@ -17259,9 +17038,8 @@ msgid "Sparse Indices Byte Offset"
 msgstr ""
 
 #: modules/gltf/gltf_accessor.cpp
-#, fuzzy
 msgid "Sparse Indices Component Type"
-msgstr "Geometri Ayrıştırılıyor..."
+msgstr "Seyrek Dizinler Bileşen Tipi"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Values Buffer View"
@@ -17291,9 +17069,8 @@ msgid "Indices"
 msgstr "Tüm Aygıtlar"
 
 #: modules/gltf/gltf_camera.cpp
-#, fuzzy
 msgid "FOV Size"
-msgstr "Boyut:"
+msgstr "Görüş Alanı Boyutu"
 
 #: modules/gltf/gltf_camera.cpp
 msgid "Zfar"
@@ -17342,7 +17119,7 @@ msgstr "Işık-Haritalarını Pişir"
 #: modules/gltf/gltf_mesh.cpp
 #, fuzzy
 msgid "Instance Materials"
-msgstr "Materyal Değişiklikleri:"
+msgstr "Örnek Malzemeler"
 
 #: modules/gltf/gltf_node.cpp scene/3d/skeleton.cpp
 #, fuzzy
@@ -17430,9 +17207,8 @@ msgid "Gloss Factor"
 msgstr ""
 
 #: modules/gltf/gltf_spec_gloss.cpp
-#, fuzzy
 msgid "Specular Factor"
-msgstr "Katsayı operatörü."
+msgstr "Yansıtıcı Etkeni"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Spec Gloss Img"
@@ -17471,9 +17247,8 @@ msgid "Accessors"
 msgstr ""
 
 #: modules/gltf/gltf_state.cpp
-#, fuzzy
 msgid "Scene Name"
-msgstr "Sahne Yolu:"
+msgstr "Sahne Adı"
 
 #: modules/gltf/gltf_state.cpp
 #, fuzzy
@@ -17502,7 +17277,7 @@ msgstr "Işık"
 #: modules/gltf/gltf_state.cpp
 #, fuzzy
 msgid "Unique Animation Names"
-msgstr "Yeni Animasyon İsmi:"
+msgstr "Benzersiz Animasyon Adları"
 
 #: modules/gltf/gltf_state.cpp
 #, fuzzy
@@ -17515,9 +17290,8 @@ msgid "Skeleton To Node"
 msgstr "Bir Düğüm Seç"
 
 #: modules/gltf/gltf_state.cpp
-#, fuzzy
 msgid "Animations"
-msgstr "Animasyonlar:"
+msgstr "Animasyonlar"
 
 #: modules/gltf/gltf_texture.cpp
 #, fuzzy
@@ -17764,7 +17538,7 @@ msgstr ""
 #: modules/stb_vorbis/resource_importer_ogg_vorbis.cpp
 #, fuzzy
 msgid "Loop Offset"
-msgstr "Kaydırma:"
+msgstr "Döngü Kaydırma"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "Eye Height"
@@ -17809,6 +17583,21 @@ msgstr "Solüsyonu İnşa Et"
 msgid "Auto Update Project"
 msgstr "Adsız Proje"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Hepsini Görüntüle"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Bir Dizin Seç"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Bir Dizin Seç"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "İç özel durum yığını izlemesinin sonu"
@@ -17887,7 +17676,7 @@ msgstr ""
 #: modules/opensimplex/noise_texture.cpp
 #, fuzzy
 msgid "As Normal Map"
-msgstr "Rastgele Ölçek:"
+msgstr "Normal Haritalama Olarak"
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "Bump Strength"
@@ -17900,7 +17689,7 @@ msgstr ""
 #: modules/opensimplex/noise_texture.cpp
 #, fuzzy
 msgid "Noise Offset"
-msgstr "Izgarayı Kaydır:"
+msgstr "Gürültü Kaydırma"
 
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Octaves"
@@ -17929,9 +17718,8 @@ msgid "Names"
 msgstr "İsim"
 
 #: modules/regex/regex.cpp
-#, fuzzy
 msgid "Strings"
-msgstr "Ayarlar:"
+msgstr "Dizgiler"
 
 #: modules/upnp/upnp.cpp
 msgid "Discover Multicast If"
@@ -18009,7 +17797,7 @@ msgstr "Bit dizisi bulundu fakat yığındaki düğüm değil, kusuru bildir!"
 #: modules/visual_script/visual_script.cpp
 #, fuzzy
 msgid "Stack overflow with stack depth:"
-msgstr "Şu derinlikte yığın taşması: "
+msgstr "Şu derinlikte yığın taşması:"
 
 #: modules/visual_script/visual_script.cpp
 #, fuzzy
@@ -18381,7 +18169,7 @@ msgstr ""
 #: modules/visual_script/visual_script_flow_control.cpp
 #, fuzzy
 msgid "Input type not iterable:"
-msgstr "Girdi türü yinelenebilir değil: "
+msgstr "Girdi türü yinelenebilir değil:"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Iterator became invalid"
@@ -18390,7 +18178,7 @@ msgstr "Yineleyici geçersiz durumda"
 #: modules/visual_script/visual_script_flow_control.cpp
 #, fuzzy
 msgid "Iterator became invalid:"
-msgstr "Yineleyici geçersiz durumda: "
+msgstr "Yineleyici geçersiz durumda:"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Sequence"
@@ -18462,9 +18250,8 @@ msgid "Use Default Args"
 msgstr "Varsayılanlara dön"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Validate"
-msgstr "Geçerli karakterler:"
+msgstr "Doğrula"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
@@ -18553,19 +18340,18 @@ msgstr "Diziyi Yeniden Boyutlandır"
 
 #: modules/visual_script/visual_script_nodes.cpp scene/resources/material.cpp
 #: scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Operator"
-msgstr "Kaplama opeartörü."
+msgstr "Operatör"
 
 #: modules/visual_script/visual_script_nodes.cpp
 #, fuzzy
 msgid "Invalid argument of type:"
-msgstr ": Şu tür için geçersiz değiştirgen: "
+msgstr ": Şu tür için geçersiz değiştirgen:"
 
 #: modules/visual_script/visual_script_nodes.cpp
 #, fuzzy
 msgid "Invalid arguments:"
-msgstr ": Geçersiz değiştirgenler: "
+msgstr ": Geçersiz değiştirgenler:"
 
 #: modules/visual_script/visual_script_nodes.cpp
 msgid "a if cond, else b"
@@ -18579,12 +18365,12 @@ msgstr "İsim"
 #: modules/visual_script/visual_script_nodes.cpp
 #, fuzzy
 msgid "VariableGet not found in script:"
-msgstr "VariableGet betikte bulunamadı: "
+msgstr "VariableGet betikte bulunamadı:"
 
 #: modules/visual_script/visual_script_nodes.cpp
 #, fuzzy
 msgid "VariableSet not found in script:"
-msgstr "VariableSet betikte bulunamadı: "
+msgstr "VariableSet betikte bulunamadı:"
 
 #: modules/visual_script/visual_script_nodes.cpp
 msgid "Preload"
@@ -18683,7 +18469,7 @@ msgstr "Görsel Betikte Ara"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "Yield"
-msgstr "Yield"
+msgstr "Verim"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "Wait"
@@ -18785,9 +18571,8 @@ msgid "CA Chain"
 msgstr "IK Zincirini Temizle"
 
 #: modules/websocket/websocket_server.cpp
-#, fuzzy
 msgid "Handshake Timeout"
-msgstr "Zaman aşımı."
+msgstr "Tokalaşma Zaman Aşımı"
 
 #: modules/webxr/webxr_interface.cpp
 #, fuzzy
@@ -18795,14 +18580,12 @@ msgid "Session Mode"
 msgstr "Bölge Kipi"
 
 #: modules/webxr/webxr_interface.cpp
-#, fuzzy
 msgid "Required Features"
-msgstr "Ana Özellikler:"
+msgstr "Gerekli Özellikler"
 
 #: modules/webxr/webxr_interface.cpp
-#, fuzzy
 msgid "Optional Features"
-msgstr "Ana Özellikler:"
+msgstr "İsteğe Bağlı Özellikler"
 
 #: modules/webxr/webxr_interface.cpp
 msgid "Requested Reference Space Types"
@@ -18907,9 +18690,8 @@ msgid "Export Format"
 msgstr "Dışa aktarım Yolu"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Min SDK"
-msgstr "Kontur Boyutu:"
+msgstr "Minimum SDK"
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -18960,14 +18742,12 @@ msgid "Code"
 msgstr ""
 
 #: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Package"
-msgstr "Çıkınla"
+msgstr "Paket"
 
 #: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Unique Name"
-msgstr "Düğüm adı:"
+msgstr "Benzersiz Ad"
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -18975,9 +18755,8 @@ msgid "Signed"
 msgstr "Sinyal"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Classify As Game"
-msgstr "Sınıf İsmi:"
+msgstr "Oyun Olarak Sınıflandır"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Retain Data On Uninstall"
@@ -18989,9 +18768,8 @@ msgid "Exclude From Recents"
 msgstr "Düğümleri Sil"
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Graphics"
-msgstr "Izgarayı Kaydır:"
+msgstr "Grafikler"
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -19063,7 +18841,7 @@ msgstr "Topluluk"
 #: platform/android/export/export_plugin.cpp platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Extra Args"
-msgstr "Ekstra Çağrı Argümanları:"
+msgstr "Ek Çağrı Argümanları"
 
 #: platform/android/export/export_plugin.cpp
 #, fuzzy
@@ -19282,10 +19060,8 @@ msgid ""
 "'apksigner' could not be found. Please check that the command is available "
 "in the Android SDK build-tools directory. The resulting %s is unsigned."
 msgstr ""
-"'apksigner' bulunamadı.\n"
-"Lütfen komutun Android SDK build-tools dizininde bulunup bulunmadığını "
-"kontrol edin.\n"
-"Elde edilen %s imzasız."
+"'apksigner' bulunamadı. Lütfen komutun Android SDK build-tools dizininde "
+"bulunup bulunmadığını kontrol edin. Elde edilen %s imzasız."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Signing debug %s..."
@@ -19300,9 +19076,8 @@ msgid "Could not find keystore, unable to export."
 msgstr "Anahtar deposu bulunamadı, dışa aktarılamadı."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Could not start apksigner executable."
-msgstr "Alt işlem başlatılamadı!"
+msgstr "apksigner uygulaması başlatılamadı."
 
 #: platform/android/export/export_plugin.cpp
 msgid "'apksigner' returned with error #%d"
@@ -19333,9 +19108,8 @@ msgid "Invalid filename! Android APK requires the *.apk extension."
 msgstr "Geçersiz dosya adı! Android APK, * .apk uzantısını gerektirir."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Unsupported export format!"
-msgstr "Desteklenmeyen dışa aktarma biçimi!\n"
+msgstr "Desteklenmeyen dışa aktarım biçimi!"
 
 #: platform/android/export/export_plugin.cpp
 msgid ""
@@ -19346,27 +19120,22 @@ msgstr ""
 "için sürüm bilgisi yok. Lütfen 'Proje' menüsünden yeniden yükleyin."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid ""
 "Android build version mismatch: Template installed: %s, Godot version: %s. "
 "Please reinstall Android build template from 'Project' menu."
 msgstr ""
-"Android derlemesi sürüm uyumsuzluğu:\n"
-"   Yüklü Şablon: %s\n"
-"   Godot Versiyonu: %s\n"
+"Android derlemesi sürüm uyumsuzluğu: Yüklü Şablon: %s, Godot versiyonu: %s. "
 "Lütfen 'Proje' menüsünden Android derleme şablonunu yeniden yükleyin."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid ""
 "Unable to overwrite res://android/build/res/*.xml files with project name."
 msgstr ""
-"Proje adıyla res://android/build/res/*.xml dosyalarının üzerine yazılamıyor"
+"Proje adıyla res://android/build/res/*.xml dosyalarının üzerine yazılamıyor."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Could not export project files to gradle project."
-msgstr "Proje dosyaları gradle projesine aktarılamadı\n"
+msgstr "Proje dosyaları gradle projesine aktarılamadı."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Could not write expansion package file!"
@@ -19382,10 +19151,9 @@ msgid ""
 "Building of Android project failed, check output for the error. "
 "Alternatively visit docs.godotengine.org for Android build documentation."
 msgstr ""
-"Android projesinin oluşturulması başarısız oldu, hatayı çıktı için kontrol "
-"edin.\n"
-"Alternatif olarak, Android derleme dokümantasyonu için docs.godotengine.org "
-"adresini ziyaret edin.."
+"Android projesinin oluşturulması başarısız oldu, hata. için çıktıyı kontrol "
+"edin. Alternatif olarak, Android derleme dokümantasyonu için docs."
+"godotengine.org adresini ziyaret edin."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Moving output"
@@ -19400,40 +19168,34 @@ msgstr ""
 "için gradle proje dizinini kontrol edin."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Package not found: \"%s\"."
-msgstr "Paket bulunamadı: %s"
+msgstr "Paket bulunamadı: \"%s\"."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Creating APK..."
 msgstr "APK oluşturuluyor..."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Could not find template APK to export: \"%s\"."
-msgstr ""
-"Dışa aktarılacak şablon APK bulunamadı:\n"
-"%s"
+msgstr "Dışa aktarılacak şablon APK bulunamadı: \"%s\"."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid ""
 "Missing libraries in the export template for the selected architectures: %s. "
 "Please build a template with all required libraries, or uncheck the missing "
 "architectures in the export preset."
 msgstr ""
-"Seçili mimariler için dışa aktarma şablonunda eksik kitaplıklar: %s.\n"
-"Lütfen tüm gerekli kitaplıkları içeren bir şablon oluşturun veya dışa "
-"aktarma ön ayarındaki eksik mimarilerin işaretini kaldırın."
+"Seçili mimariler için dışa aktarma şablonunda eksik kitaplıklar: %s. Lütfen "
+"tüm gerekli kitaplıkları içeren bir şablon oluşturun veya dışa aktarma ön "
+"ayarındaki eksik mimarilerin işaretini kaldırın."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Adding files..."
 msgstr "Dosyalar ekleniyor..."
 
 #: platform/android/export/export_plugin.cpp
-#, fuzzy
 msgid "Could not export project files."
-msgstr "Proje dosyaları dışa aktarılamadı"
+msgstr "Proje dosyaları dışa aktarılamadı."
 
 #: platform/android/export/export_plugin.cpp
 msgid "Aligning APK..."
@@ -19529,9 +19291,8 @@ msgid "Code Sign Identity Release"
 msgstr ""
 
 #: platform/iphone/export/export.cpp
-#, fuzzy
 msgid "Export Method Release"
-msgstr "Dışa Aktarma Biçimi:"
+msgstr "Dışa Aktarma Yöntemi Sürümü"
 
 #: platform/iphone/export/export.cpp
 msgid "Targeted Device Family"
@@ -19542,9 +19303,8 @@ msgid "Info"
 msgstr ""
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
-#, fuzzy
 msgid "Identifier"
-msgstr "Geçersiz Tanımlayıcı:"
+msgstr "Tanımlayıcı"
 
 #: platform/iphone/export/export.cpp platform/osx/export/export.cpp
 #, fuzzy
@@ -19570,12 +19330,12 @@ msgstr "Özellikleri Yapıştır"
 #: platform/iphone/export/export.cpp
 #, fuzzy
 msgid "Access Wi-Fi"
-msgstr "Başarılı!"
+msgstr "Wi-Fi'ye Eriş"
 
 #: platform/iphone/export/export.cpp
 #, fuzzy
 msgid "Push Notifications"
-msgstr "Rastgele Döndürme:"
+msgstr "Rastgele Döndürme"
 
 #: platform/iphone/export/export.cpp
 #, fuzzy
@@ -19675,6 +19435,11 @@ msgstr "ÖzelSınıf"
 msgid "Custom BG Color"
 msgstr "ÖzelSınıf"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Hepsini Genişlet"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19707,19 +19472,16 @@ msgid "Run exported HTML in the system's default browser."
 msgstr "Dışa aktarılmış HTML'yi sistemin varsayılan tarayıcısında çalıştır."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not open template for export: \"%s\"."
-msgstr "Dışa aktarma için şablon açılamadı:"
+msgstr "Dışa aktarım için şablon açılamadı: \"%s\"."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Invalid export template: \"%s\"."
-msgstr "Geçersiz Dışa Aktarım Şablonu:"
+msgstr "Geçersiz dışa aktarım şablonu: \"%s\"."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not write file: \"%s\"."
-msgstr "Dosya yazılamadı:"
+msgstr "Dosya yazılamadı: \"%s\"."
 
 #: platform/javascript/export/export.cpp platform/osx/export/export.cpp
 #, fuzzy
@@ -19727,18 +19489,16 @@ msgid "Icon Creation"
 msgstr "Kenar Boşluk Belirle"
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not read file: \"%s\"."
-msgstr "Dosya okunamadı:"
+msgstr "Dosya okunamadı: \"%s\"."
 
 #: platform/javascript/export/export.cpp
 msgid "PWA"
 msgstr ""
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Variant"
-msgstr "Ayrım:"
+msgstr "Varyant"
 
 #: platform/javascript/export/export.cpp
 #, fuzzy
@@ -19810,19 +19570,16 @@ msgid "Icon 512 X 512"
 msgstr ""
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not read HTML shell: \"%s\"."
-msgstr "HTML kabuğu okunamadı:"
+msgstr "HTML kabuğu okunamadı: \"%s\"."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Could not create HTTP server directory: %s."
-msgstr "HTTP sunucu klasörü oluşturulamadı:"
+msgstr "HTTP sunucu klasörü oluşturulamadı: \"%s\"."
 
 #: platform/javascript/export/export.cpp
-#, fuzzy
 msgid "Error starting HTTP server: %d."
-msgstr "HTTP sunucusu başlatılırken hata:"
+msgstr "HTTP sunucusu başlatılırken hata: %d."
 
 #: platform/javascript/export/export.cpp
 msgid "Web"
@@ -19926,9 +19683,8 @@ msgid "Unknown object type."
 msgstr ""
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "App Category"
-msgstr "Kategori:"
+msgstr "Uygulama Kategorisi"
 
 #: platform/osx/export/export.cpp
 msgid "High Res"
@@ -20122,19 +19878,16 @@ msgid "Apple Team ID"
 msgstr ""
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Could not open icon file \"%s\"."
-msgstr "Proje dosyaları dışa aktarılamadı"
+msgstr "İkon dosyası \"%s\" açılamadı."
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Could not start xcrun executable."
-msgstr "Alt işlem başlatılamadı!"
+msgstr "xcrun uygulaması başlatılamadı."
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Notarization failed."
-msgstr "Yerelleştirme"
+msgstr "Noter tasdiki başarısız oldu."
 
 #: platform/osx/export/export.cpp
 msgid "Notarization request UUID: \"%s\""
@@ -20187,9 +19940,8 @@ msgid "No identity found."
 msgstr "Simge bulunamadı."
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Cannot sign file %s."
-msgstr "%s dosyası kaydedilirken hata"
+msgstr "%s dosyası imzalanamadı."
 
 #: platform/osx/export/export.cpp
 msgid "Relative symlinks are not supported, exported \"%s\" might be broken!"
@@ -20201,9 +19953,8 @@ msgid "DMG Creation"
 msgstr "Yönler"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Could not start hdiutil executable."
-msgstr "Alt işlem başlatılamadı!"
+msgstr "hdiutil uygulaması başlatılamadı."
 
 #: platform/osx/export/export.cpp
 msgid "`hdiutil create` failed - file exists."
@@ -20219,16 +19970,12 @@ msgid "Creating app bundle"
 msgstr "Küçük Bediz Oluşturuluyor"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Could not find template app to export: \"%s\"."
-msgstr ""
-"Dışa aktarılacak şablon APK bulunamadı:\n"
-"%s"
+msgstr "Dışa aktarım için şablon uygulaması bulunamadı: \"%s\"."
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Invalid export format."
-msgstr "Geçersiz Dışa Aktarım Şablonu:"
+msgstr "Geçersiz dışa aktarım biçimi."
 
 #: platform/osx/export/export.cpp
 msgid ""
@@ -20284,9 +20031,8 @@ msgid "ZIP Creation"
 msgstr "Proje"
 
 #: platform/osx/export/export.cpp
-#, fuzzy
 msgid "Could not open file to read from path \"%s\"."
-msgstr "Proje dosyaları gradle projesine aktarılamadı\n"
+msgstr "\"%s\" yolundan okunacak dosya açılamadı."
 
 #: platform/osx/export/export.cpp
 msgid "Invalid bundle identifier:"
@@ -20413,23 +20159,20 @@ msgid "Display Name"
 msgstr "Hepsini Görüntüle"
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Short Name"
-msgstr "Betik Adı:"
+msgstr "Kısa Ad"
 
 #: platform/uwp/export/export.cpp
 msgid "Publisher"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Publisher Display Name"
-msgstr "Geçersiz paket yayıncı görünen adı."
+msgstr "Görünen Yayıncı Adı"
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Product GUID"
-msgstr "Geçersiz ürün GUID'i."
+msgstr "Ürün GUID"
 
 #: platform/uwp/export/export.cpp
 #, fuzzy
@@ -20444,7 +20187,7 @@ msgstr "Sinyal"
 #: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Certificate"
-msgstr "Köşenoktalar:"
+msgstr "Sertifika"
 
 #: platform/uwp/export/export.cpp
 #, fuzzy
@@ -20512,9 +20255,8 @@ msgid "Wide 310 X 150 Logo"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Splash Screen"
-msgstr "Çizim Çağrıları:"
+msgstr "Başlangıç Ekranı"
 
 #: platform/uwp/export/export.cpp
 #, fuzzy
@@ -20534,6 +20276,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Geçersiz paket kısa ismi."
 
@@ -20604,9 +20352,8 @@ msgid "Debug Algorithm"
 msgstr "Hata Ayıklayıcı"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Failed to rename temporary file \"%s\"."
-msgstr "Geçici dosya kaldırılamıyor:"
+msgstr "\"%s\" geçici dosyasının yeniden adlandırılması başarısız oldu."
 
 #: platform/windows/export/export.cpp
 msgid "Identity Type"
@@ -20632,19 +20379,16 @@ msgid "File Version"
 msgstr "Sürüm"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Product Version"
-msgstr "Geçersiz ürün GUID'i."
+msgstr "Ürün Sürümü"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Company Name"
-msgstr "Düğüm adı:"
+msgstr "Şirket Adı"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Product Name"
-msgstr "Proje Adı:"
+msgstr "Ürün Adı"
 
 #: platform/windows/export/export.cpp
 #, fuzzy
@@ -20693,9 +20437,8 @@ msgid "Could not find osslsigncode executable at \"%s\"."
 msgstr "Anahtar deposu bulunamadı, dışa aktarılamadı."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Invalid identity type."
-msgstr "Geçersiz Tanımlayıcı:"
+msgstr "Geçersiz kimlik türü."
 
 #: platform/windows/export/export.cpp
 #, fuzzy
@@ -20715,9 +20458,8 @@ msgid "Signtool failed to sign executable: %s."
 msgstr "Geçersiz uzantı."
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Failed to remove temporary file \"%s\"."
-msgstr "Geçici dosya kaldırılamıyor:"
+msgstr "\"%s\" geçici dosyasının silinme işlemi başarısız oldu."
 
 #: platform/windows/export/export.cpp
 msgid ""
@@ -20726,19 +20468,16 @@ msgid ""
 msgstr ""
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Invalid icon path:"
-msgstr "Geçersiz yol."
+msgstr "Geçersiz ikon yolu:"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Invalid file version:"
-msgstr "Geçersiz uzantı."
+msgstr "Geçersiz dosya sürümü:"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Invalid product version:"
-msgstr "Geçersiz ürün GUID'i."
+msgstr "Geçersiz ürün sürümü:"
 
 #: platform/windows/export/export.cpp
 msgid "Windows executables cannot be >= 4 GiB."
@@ -20875,7 +20614,6 @@ msgid "Audio Bus"
 msgstr "Audio Bus Ekle"
 
 #: scene/2d/area_2d.cpp scene/3d/area.cpp
-#, fuzzy
 msgid "Override"
 msgstr "Üzerine Yaz"
 
@@ -20907,9 +20645,8 @@ msgstr ""
 #: scene/3d/light.cpp scene/3d/reflection_probe.cpp
 #: scene/3d/visibility_notifier.cpp scene/3d/visual_instance.cpp
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Max Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Maksimum Uzaklık"
 
 #: scene/2d/audio_stream_player_2d.cpp scene/3d/light.cpp
 #, fuzzy
@@ -20937,15 +20674,14 @@ msgid "Anchor Mode"
 msgstr "Simge Kipi"
 
 #: scene/2d/camera_2d.cpp
-#, fuzzy
 msgid "Rotating"
-msgstr "Dönme Adımı:"
+msgstr "Döndürme"
 
 #: scene/2d/camera_2d.cpp scene/2d/listener_2d.cpp scene/3d/camera.cpp
 #: scene/3d/listener.cpp scene/animation/animation_blend_tree.cpp
 #, fuzzy
 msgid "Current"
-msgstr "Geçerli:"
+msgstr "Geçerli"
 
 #: scene/2d/camera_2d.cpp scene/gui/graph_edit.cpp
 #, fuzzy
@@ -21027,14 +20763,12 @@ msgid "Drag Margin"
 msgstr "Kenar Boşluk Belirle"
 
 #: scene/2d/camera_2d.cpp
-#, fuzzy
 msgid "Draw Screen"
-msgstr "Çizim Çağrıları:"
+msgstr "Çizim Ekranı"
 
 #: scene/2d/camera_2d.cpp
-#, fuzzy
 msgid "Draw Limits"
-msgstr "Çizim Çağrıları:"
+msgstr "Çizim Sınırları"
 
 #: scene/2d/camera_2d.cpp
 #, fuzzy
@@ -21248,9 +20982,8 @@ msgstr ""
 
 #: scene/2d/cpu_particles_2d.cpp scene/2d/particles_2d.cpp
 #: scene/3d/cpu_particles.cpp scene/3d/particles.cpp
-#, fuzzy
 msgid "Randomness"
-msgstr "Rastgele Yeniden Başlama (sn):"
+msgstr "Rastgelelik"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
@@ -21292,9 +21025,8 @@ msgstr "Emisyon Maskesi"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Sphere Radius"
-msgstr "Emisyon Kaynağı: "
+msgstr "Küre Yarıçapı"
 
 #: scene/2d/cpu_particles_2d.cpp
 #, fuzzy
@@ -21364,7 +21096,7 @@ msgstr "Doğrusal"
 #: scene/resources/particles_material.cpp
 #, fuzzy
 msgid "Accel"
-msgstr "Başarılı!"
+msgstr "Hızlanma"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
@@ -21423,9 +21155,8 @@ msgid "Angle Curve"
 msgstr "Eğriyi Kapat"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
-#, fuzzy
 msgid "Scale Amount"
-msgstr "Değer:"
+msgstr "Ölçek Miktarı"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 msgid "Scale Amount Random"
@@ -21451,13 +21182,12 @@ msgstr ""
 #: scene/resources/particles_material.cpp
 #, fuzzy
 msgid "Hue Variation"
-msgstr "Ayrım:"
+msgstr "Renk Tonu Varyasyonu"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Variation"
-msgstr "Ayrım:"
+msgstr "Varyasyon"
 
 #: scene/2d/cpu_particles_2d.cpp scene/3d/cpu_particles.cpp
 #: scene/resources/particles_material.cpp
@@ -21687,9 +21417,8 @@ msgid "End Cap Mode"
 msgstr "Yapışma Kipi:"
 
 #: scene/2d/line_2d.cpp scene/2d/polygon_2d.cpp scene/resources/style_box.cpp
-#, fuzzy
 msgid "Border"
-msgstr "Klasör yeniden adlandırma:"
+msgstr "Kenar"
 
 #: scene/2d/line_2d.cpp
 msgid "Sharp Limit"
@@ -21743,9 +21472,8 @@ msgid "Target Desired Distance"
 msgstr ""
 
 #: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
-#, fuzzy
 msgid "Path Max Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Yol Maksimum Mesafesi"
 
 #: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
 #, fuzzy
@@ -21771,9 +21499,8 @@ msgid "Time Horizon"
 msgstr "Yatay Yansıt"
 
 #: scene/2d/navigation_agent_2d.cpp scene/3d/navigation_agent.cpp
-#, fuzzy
 msgid "Max Speed"
-msgstr "Hız:"
+msgstr "Maksimum Hız"
 
 #: scene/2d/navigation_agent_2d.cpp
 #, fuzzy
@@ -21817,9 +21544,8 @@ msgstr "Seyahat"
 
 #: scene/2d/node_2d.cpp scene/2d/polygon_2d.cpp scene/3d/spatial.cpp
 #: scene/main/canvas_layer.cpp
-#, fuzzy
 msgid "Rotation Degrees"
-msgstr "%s Düzey Dönüyor."
+msgstr "Dönüş Açıları"
 
 #: scene/2d/node_2d.cpp scene/3d/spatial.cpp
 #, fuzzy
@@ -21827,14 +21553,12 @@ msgid "Global Rotation"
 msgstr "Genel Sabit"
 
 #: scene/2d/node_2d.cpp
-#, fuzzy
 msgid "Global Rotation Degrees"
-msgstr "%s Düzey Dönüyor."
+msgstr "Genel Dönüş Açıları"
 
 #: scene/2d/node_2d.cpp
-#, fuzzy
 msgid "Global Scale"
-msgstr "Rastgele Ölçek:"
+msgstr "Küresel Ölçek"
 
 #: scene/2d/node_2d.cpp scene/3d/spatial.cpp
 #, fuzzy
@@ -22022,9 +21746,8 @@ msgid "Mass"
 msgstr ""
 
 #: scene/2d/physics_body_2d.cpp
-#, fuzzy
 msgid "Inertia"
-msgstr "Dikey:"
+msgstr "Eylemsizlik"
 
 #: scene/2d/physics_body_2d.cpp scene/3d/physics_body.cpp
 #, fuzzy
@@ -22308,9 +22031,8 @@ msgid "Compatibility Mode"
 msgstr "Öncelik Kipi"
 
 #: scene/2d/tile_map.cpp
-#, fuzzy
 msgid "Centered Textures"
-msgstr "Ana Özellikler:"
+msgstr "Merkezlenmiş Dokular"
 
 #: scene/2d/tile_map.cpp
 msgid "Cell Clip UV"
@@ -22434,9 +22156,8 @@ msgid "ARVROrigin requires an ARVRCamera child node."
 msgstr "ARVROrigin bir ARVRCamera alt düğümü gerektirir."
 
 #: scene/3d/arvr_nodes.cpp servers/arvr_server.cpp
-#, fuzzy
 msgid "World Scale"
-msgstr "Rastgele Ölçek:"
+msgstr "Dünya Ölçeği"
 
 #: scene/3d/audio_stream_player_3d.cpp
 #, fuzzy
@@ -22465,9 +22186,8 @@ msgid "Emission Angle"
 msgstr "Emisyon Renkleri"
 
 #: scene/3d/audio_stream_player_3d.cpp
-#, fuzzy
 msgid "Degrees"
-msgstr "%s Düzey Dönüyor."
+msgstr "Açılar"
 
 #: scene/3d/audio_stream_player_3d.cpp
 #, fuzzy
@@ -22578,9 +22298,8 @@ msgid "Generate"
 msgstr "Genel"
 
 #: scene/3d/baked_lightmap.cpp
-#, fuzzy
 msgid "Max Size"
-msgstr "Boyut:"
+msgstr "Maksimum Boyut"
 
 #: scene/3d/baked_lightmap.cpp
 #, fuzzy
@@ -22588,9 +22307,8 @@ msgid "Custom Sky"
 msgstr "ÖzelSınıf"
 
 #: scene/3d/baked_lightmap.cpp
-#, fuzzy
 msgid "Custom Sky Rotation Degrees"
-msgstr "%s Düzey Dönüyor."
+msgstr "Özel Gökyüzü Dönüş Açıları"
 
 #: scene/3d/baked_lightmap.cpp scene/3d/ray_cast.cpp
 #, fuzzy
@@ -22909,14 +22627,12 @@ msgstr "Beyaz Modüle Etme Kuvveti"
 
 #: scene/3d/label_3d.cpp scene/resources/default_theme/default_theme.cpp
 #: scene/resources/dynamic_font.cpp scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Font"
-msgstr "Yazı Tipleri"
+msgstr "Yazı Tipi"
 
 #: scene/3d/label_3d.cpp scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Horizontal Alignment"
-msgstr "Yatay:"
+msgstr "Yatay Hizalama"
 
 #: scene/3d/label_3d.cpp
 #, fuzzy
@@ -23026,9 +22742,8 @@ msgid "Software Skinning"
 msgstr ""
 
 #: scene/3d/mesh_instance.cpp
-#, fuzzy
 msgid "Transform Normals"
-msgstr "Dönüşüm Durduruldu."
+msgstr "Dönüşüm Normalleri"
 
 #: scene/3d/navigation.cpp
 msgid ""
@@ -23239,9 +22954,8 @@ msgid "Angular Limit Upper"
 msgstr "Doğrusal"
 
 #: scene/3d/physics_body.cpp
-#, fuzzy
 msgid "Angular Limit Lower"
-msgstr "Maks. Açısal Hata:"
+msgstr "Açısal Limit Alt"
 
 #: scene/3d/physics_body.cpp
 #, fuzzy
@@ -23406,9 +23120,8 @@ msgid "Exclude Nodes"
 msgstr "Düğümleri Sil"
 
 #: scene/3d/physics_joint.cpp
-#, fuzzy
 msgid "Params"
-msgstr "Parametre Değiştirildi:"
+msgstr "Parametreler"
 
 #: scene/3d/physics_joint.cpp
 msgid "Angular Limit"
@@ -23436,7 +23149,7 @@ msgstr "Yörünge Görünümü Sağ"
 #: scene/3d/physics_joint.cpp
 #, fuzzy
 msgid "Max Impulse"
-msgstr "Hız:"
+msgstr "Maksimum İtme"
 
 #: scene/3d/physics_joint.cpp
 #, fuzzy
@@ -23444,14 +23157,12 @@ msgid "Linear Limit"
 msgstr "Doğrusal"
 
 #: scene/3d/physics_joint.cpp
-#, fuzzy
 msgid "Upper Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Üst Mesafe"
 
 #: scene/3d/physics_joint.cpp
-#, fuzzy
 msgid "Lower Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Alt Mesafe"
 
 #: scene/3d/physics_joint.cpp
 #, fuzzy
@@ -23499,9 +23210,8 @@ msgid "Linear Motor X"
 msgstr "Etkinleştir"
 
 #: scene/3d/physics_joint.cpp
-#, fuzzy
 msgid "Force Limit"
-msgstr "Çizim Çağrıları:"
+msgstr "Kuvvet Sınırı"
 
 #: scene/3d/physics_joint.cpp
 #, fuzzy
@@ -23619,9 +23329,8 @@ msgid "Dispatch Mode"
 msgstr ""
 
 #: scene/3d/proximity_group.cpp
-#, fuzzy
 msgid "Grid Radius"
-msgstr "Yarıçap:"
+msgstr "Izgara Yarıçapı"
 
 #: scene/3d/ray_cast.cpp
 #, fuzzy
@@ -23908,14 +23617,12 @@ msgid "Parent Collision Ignore"
 msgstr "Temas Çokgeni Oluştur"
 
 #: scene/3d/soft_body.cpp
-#, fuzzy
 msgid "Simulation Precision"
-msgstr "Animasyon ağacı geçersizdir."
+msgstr "Simülasyon Hassasiyeti"
 
 #: scene/3d/soft_body.cpp
-#, fuzzy
 msgid "Total Mass"
-msgstr "Toplam:"
+msgstr "Toplam Kütle"
 
 #: scene/3d/soft_body.cpp
 msgid "Linear Stiffness"
@@ -23984,7 +23691,7 @@ msgstr ""
 
 #: scene/3d/sprite_3d.cpp scene/gui/graph_edit.cpp
 msgid "Opacity"
-msgstr ""
+msgstr "Şeffaflık"
 
 #: scene/3d/sprite_3d.cpp scene/resources/material.cpp
 #, fuzzy
@@ -24039,9 +23746,8 @@ msgid "Use As Steering"
 msgstr ""
 
 #: scene/3d/vehicle_body.cpp
-#, fuzzy
 msgid "Wheel"
-msgstr "Tekerlek Yukarı."
+msgstr "Tekerlek"
 
 #: scene/3d/vehicle_body.cpp
 msgid "Roll Influence"
@@ -24111,9 +23817,8 @@ msgstr ""
 
 #: scene/3d/visual_instance.cpp scene/animation/skeleton_ik.cpp
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Min Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Minimum Mesafe"
 
 #: scene/3d/visual_instance.cpp
 msgid "Min Hysteresis"
@@ -24162,31 +23867,30 @@ msgstr "Düğümü Çırp"
 #: scene/animation/animation_blend_tree.cpp
 #, fuzzy
 msgid "Fadein Time"
-msgstr "X-Sönülme Süresi (sn):"
+msgstr "Solma Süresi"
 
 #: scene/animation/animation_blend_tree.cpp
 #, fuzzy
 msgid "Fadeout Time"
-msgstr "X-Sönülme Süresi (sn):"
+msgstr "Kararma Süresi"
 
 #: scene/animation/animation_blend_tree.cpp
 #, fuzzy
 msgid "Auto Restart"
-msgstr "Kendiliğinden Yeniden Başlat:"
+msgstr "Otomatik Yeniden Başlat"
 
 #: scene/animation/animation_blend_tree.cpp
 #, fuzzy
 msgid "Autorestart"
-msgstr "Kendiliğinden Yeniden Başlat:"
+msgstr "Otomatik Yeniden Başlatma"
 
 #: scene/animation/animation_blend_tree.cpp
 msgid "Delay"
 msgstr ""
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Random Delay"
-msgstr "Rastgele Eğilme:"
+msgstr "Rastgele Gecikme"
 
 #: scene/animation/animation_blend_tree.cpp
 #, fuzzy
@@ -24196,7 +23900,7 @@ msgstr "Değer:"
 #: scene/animation/animation_blend_tree.cpp
 #, fuzzy
 msgid "Blend Amount"
-msgstr "Değer:"
+msgstr "Karıştırma Miktarı"
 
 #: scene/animation/animation_blend_tree.cpp
 #, fuzzy
@@ -24212,7 +23916,7 @@ msgstr "Giriş Portu Ekle"
 #: scene/animation/animation_node_state_machine.cpp
 #, fuzzy
 msgid "Xfade Time"
-msgstr "X-Sönülme Süresi (sn):"
+msgstr "X-Sönülme Süresi"
 
 #: scene/animation/animation_node_state_machine.cpp
 #, fuzzy
@@ -24258,9 +23962,8 @@ msgid "Current Animation Position"
 msgstr "Animasyon Noktası Ekle"
 
 #: scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Playback Options"
-msgstr "Sınıf Seçenekleri:"
+msgstr "Oynatma Seçenekleri"
 
 #: scene/animation/animation_player.cpp
 #, fuzzy
@@ -24304,7 +24007,7 @@ msgstr "AnimationOynatıcı kök düğümü geçerli bir düğüm değil."
 #: scene/animation/animation_tree.cpp
 #, fuzzy
 msgid "Tree Root"
-msgstr "Kök Düğüm Oluştur:"
+msgstr "Ağaç Kökü"
 
 #: scene/animation/animation_tree.cpp
 #, fuzzy
@@ -24562,9 +24265,8 @@ msgid "Grow Direction"
 msgstr "Yönler"
 
 #: scene/gui/control.cpp scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Min Size"
-msgstr "Kontur Boyutu:"
+msgstr "Minimum Boyut"
 
 #: scene/gui/control.cpp
 #, fuzzy
@@ -24620,18 +24322,16 @@ msgid "Mouse"
 msgstr ""
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Default Cursor Shape"
-msgstr "Varsayılan Bus Yerleşim Düzenini Yükle."
+msgstr "Varsayılan İmleç Şekli"
 
 #: scene/gui/control.cpp
 msgid "Pass On Modal Close Click"
 msgstr ""
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Size Flags"
-msgstr "Boyut: "
+msgstr "Boyut Etiketleri"
 
 #: scene/gui/control.cpp
 #, fuzzy
@@ -24784,9 +24484,8 @@ msgid "Fixed Column Width"
 msgstr ""
 
 #: scene/gui/item_list.cpp
-#, fuzzy
 msgid "Icon Scale"
-msgstr "Rastgele Ölçek:"
+msgstr "Simge Ölçeği"
 
 #: scene/gui/item_list.cpp
 #, fuzzy
@@ -24799,9 +24498,8 @@ msgid "V Align"
 msgstr "Ata"
 
 #: scene/gui/label.cpp scene/gui/rich_text_label.cpp
-#, fuzzy
 msgid "Visible Characters"
-msgstr "Geçerli karakterler:"
+msgstr "Görünür Karakterler"
 
 #: scene/gui/label.cpp scene/gui/rich_text_label.cpp
 #, fuzzy
@@ -24825,9 +24523,8 @@ msgid "Secret"
 msgstr ""
 
 #: scene/gui/line_edit.cpp
-#, fuzzy
 msgid "Secret Character"
-msgstr "Geçerli karakterler:"
+msgstr "Gizli Karakter"
 
 #: scene/gui/line_edit.cpp
 msgid "Expand To Text Length"
@@ -24884,16 +24581,15 @@ msgstr ""
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
 msgid "Caret"
-msgstr "Karet"
+msgstr "İmleç"
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
 msgid "Blink"
 msgstr ""
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Blink Speed"
-msgstr "Hız:"
+msgstr "Yanıp Sönme Hızı"
 
 #: scene/gui/link_button.cpp
 msgid "Underline"
@@ -24980,9 +24676,8 @@ msgid "Allow Search"
 msgstr "Ara"
 
 #: scene/gui/progress_bar.cpp
-#, fuzzy
 msgid "Percent"
-msgstr "Yakın zamanda:"
+msgstr "Yüzde"
 
 #: scene/gui/range.cpp
 msgid "If \"Exp Edit\" is enabled, \"Min Value\" must be greater than 0."
@@ -24999,9 +24694,8 @@ msgid "Max Value"
 msgstr "Değer"
 
 #: scene/gui/range.cpp
-#, fuzzy
 msgid "Page"
-msgstr "Sayfa: "
+msgstr "Sayfa"
 
 #: scene/gui/range.cpp
 #, fuzzy
@@ -25042,9 +24736,8 @@ msgid "Absolute Index"
 msgstr "Kendinden Girintili"
 
 #: scene/gui/rich_text_effect.cpp
-#, fuzzy
 msgid "Elapsed Time"
-msgstr "Süreleri Karıştır:"
+msgstr "Geçen Süre"
 
 #: scene/gui/rich_text_effect.cpp
 #, fuzzy
@@ -25052,9 +24745,8 @@ msgid "Env"
 msgstr "Bitiş"
 
 #: scene/gui/rich_text_effect.cpp
-#, fuzzy
 msgid "Character"
-msgstr "Geçerli karakterler:"
+msgstr "Karakter"
 
 #: scene/gui/rich_text_label.cpp
 msgid "BBCode"
@@ -25065,9 +24757,8 @@ msgid "Meta Underlined"
 msgstr ""
 
 #: scene/gui/rich_text_label.cpp
-#, fuzzy
 msgid "Tab Size"
-msgstr "Boyut:"
+msgstr "Sekme Boyutu"
 
 #: scene/gui/rich_text_label.cpp
 #, fuzzy
@@ -25143,17 +24834,15 @@ msgstr "Renk Seç"
 #: scene/gui/slider.cpp
 #, fuzzy
 msgid "Ticks On Borders"
-msgstr "Klasör yeniden adlandırma:"
+msgstr "Kenarlar Üzerindeki İşaretler"
 
 #: scene/gui/spin_box.cpp
-#, fuzzy
 msgid "Prefix"
-msgstr "Ön Ek:"
+msgstr "Ön Ek"
 
 #: scene/gui/spin_box.cpp
-#, fuzzy
 msgid "Suffix"
-msgstr "Son Ek (Suffix) :"
+msgstr "Son Ek"
 
 #: scene/gui/split_container.cpp
 #, fuzzy
@@ -25175,9 +24864,8 @@ msgid "Tab Align"
 msgstr ""
 
 #: scene/gui/tab_container.cpp scene/gui/tabs.cpp
-#, fuzzy
 msgid "Current Tab"
-msgstr "Geçerli:"
+msgstr "Geçerli Sekme"
 
 #: scene/gui/tab_container.cpp
 #, fuzzy
@@ -25189,9 +24877,8 @@ msgid "All Tabs In Front"
 msgstr ""
 
 #: scene/gui/tab_container.cpp scene/gui/tabs.cpp
-#, fuzzy
 msgid "Drag To Rearrange Enabled"
-msgstr "Düzenlemek için Sürükle-Bırak."
+msgstr "Sürükleyerek Yeniden Düzenleme Aktifleştirildi"
 
 #: scene/gui/tab_container.cpp
 msgid "Use Hidden Tabs For Min Size"
@@ -25240,19 +24927,17 @@ msgid "Wrap Enabled"
 msgstr "Etkin"
 
 #: scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Scroll Vertical"
-msgstr "Dikey:"
+msgstr "Dikey Kaydırma"
 
 #: scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Scroll Horizontal"
-msgstr "Yatay:"
+msgstr "Yatay Kaydırma"
 
 #: scene/gui/text_edit.cpp
 #, fuzzy
 msgid "Draw"
-msgstr "Çizim Çağrıları:"
+msgstr "Çiz"
 
 #: scene/gui/text_edit.cpp
 #, fuzzy
@@ -25312,7 +24997,7 @@ msgstr ""
 #: scene/gui/texture_progress.cpp
 #, fuzzy
 msgid "Fill Mode"
-msgstr "Oynatma Modu:"
+msgstr "Doldurma Modu"
 
 #: scene/gui/texture_progress.cpp scene/resources/material.cpp
 msgid "Tint"
@@ -25328,9 +25013,8 @@ msgid "Initial Angle"
 msgstr "Etkinleştir"
 
 #: scene/gui/texture_progress.cpp
-#, fuzzy
 msgid "Fill Degrees"
-msgstr "%s Düzey Dönüyor."
+msgstr "Dolgu Aşamaları"
 
 #: scene/gui/texture_progress.cpp scene/resources/primitive_meshes.cpp
 #, fuzzy
@@ -25381,9 +25065,8 @@ msgid "Hide Folding"
 msgstr "Pasif Düğme"
 
 #: scene/gui/tree.cpp
-#, fuzzy
 msgid "Hide Root"
-msgstr "Kök Düğüm Oluştur:"
+msgstr "Kökü Gizle"
 
 #: scene/gui/tree.cpp
 msgid "Drop Mode Flags"
@@ -25437,9 +25120,8 @@ msgid "Max Redirects"
 msgstr ""
 
 #: scene/main/http_request.cpp
-#, fuzzy
 msgid "Timeout"
-msgstr "Zaman aşımı."
+msgstr "Zaman Aşımı"
 
 #: scene/main/node.cpp
 msgid ""
@@ -25567,9 +25249,8 @@ msgid "Draw 2D Outlines"
 msgstr "Anahat Oluştur"
 
 #: scene/main/scene_tree.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "Reflections"
-msgstr "Yönler"
+msgstr "Yansımalar"
 
 #: scene/main/scene_tree.cpp
 #, fuzzy
@@ -25631,9 +25312,8 @@ msgstr ""
 "döngüsünü kullanmayı tercih edin."
 
 #: scene/main/timer.cpp
-#, fuzzy
 msgid "Autostart"
-msgstr "Kendiliğinden Yeniden Başlat:"
+msgstr "Otomatik başlatma"
 
 #: scene/main/viewport.cpp
 #, fuzzy
@@ -25961,9 +25641,8 @@ msgid "On Disabled"
 msgstr "Pasif Öge"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Off"
-msgstr "Kaydırma:"
+msgstr "Kapat"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26046,9 +25725,8 @@ msgid "Space"
 msgstr "Ana Sahne"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Folded"
-msgstr "Dosya:"
+msgstr "Katlanmış"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26207,9 +25885,8 @@ msgid "Labeled Separator Right"
 msgstr "İsimli Ayraç"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Separator"
-msgstr "Renk operatörü."
+msgstr "Yazı Tipi Ayracı"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26217,9 +25894,8 @@ msgid "Font Color Accel"
 msgstr "Renk Öğesini Yeniden Adlandır"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Font Color Separator"
-msgstr "Renk operatörü."
+msgstr "Yazı Tipi Rengi Ayracı"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26389,14 +26065,12 @@ msgid "Draw Guides"
 msgstr "Kılavuz çizgilerini göster"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Border"
-msgstr "Dikey:"
+msgstr "Kaydırma Kenarlığı"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Speed"
-msgstr "Izgarayı Kaydır:"
+msgstr "Kaydırma Hızı"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26466,9 +26140,8 @@ msgid "Large"
 msgstr "Hedef"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Folder"
-msgstr "Dosya:"
+msgstr "Klasör"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26506,9 +26179,8 @@ msgid "Label Width"
 msgstr "Soldan Görünüm"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Screen Picker"
-msgstr "Screen Etkisi operatörü."
+msgstr "Ekran Seçici"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -26671,7 +26343,7 @@ msgstr "Yola Odaklan"
 #: scene/resources/dynamic_font.cpp
 #, fuzzy
 msgid "Outline Size"
-msgstr "Kontur Boyutu:"
+msgstr "Kontur Boyutu"
 
 #: scene/resources/dynamic_font.cpp
 #, fuzzy
@@ -26684,14 +26356,12 @@ msgid "Use Mipmaps"
 msgstr "sinyaller"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Extra Spacing"
-msgstr "İlave Seçenekler:"
+msgstr "Ekstra Boşluk"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Char"
-msgstr "Geçerli karakterler:"
+msgstr "karakter"
 
 #: scene/resources/dynamic_font.cpp
 #, fuzzy
@@ -26722,9 +26392,8 @@ msgid "Sky Rotation"
 msgstr "Dönme Adımı:"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sky Rotation Degrees"
-msgstr "%s Düzey Dönüyor."
+msgstr "Gökyüzü Dönüş Açıları"
 
 #: scene/resources/environment.cpp
 msgid "Canvas Max Layer"
@@ -26749,14 +26418,13 @@ msgid "Fog"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sun Color"
-msgstr "Dosya Depolama:"
+msgstr "Güneş Rengi"
 
 #: scene/resources/environment.cpp
 #, fuzzy
 msgid "Sun Amount"
-msgstr "Değer:"
+msgstr "Güneş Miktarı"
 
 #: scene/resources/environment.cpp
 #, fuzzy
@@ -26845,14 +26513,13 @@ msgid "Max Steps"
 msgstr "Adım"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Fade In"
-msgstr "Açılma (sn):"
+msgstr "Solma"
 
 #: scene/resources/environment.cpp
 #, fuzzy
 msgid "Fade Out"
-msgstr "Karartma (sn):"
+msgstr "Kararma"
 
 #: scene/resources/environment.cpp
 #, fuzzy
@@ -26870,7 +26537,7 @@ msgstr ""
 #: scene/resources/environment.cpp
 #, fuzzy
 msgid "Radius 2"
-msgstr "Yarıçap:"
+msgstr "Yarıçap 2"
 
 #: scene/resources/environment.cpp
 msgid "Intensity 2"
@@ -26899,14 +26566,12 @@ msgid "DOF Far Blur"
 msgstr ""
 
 #: scene/resources/environment.cpp scene/resources/material.cpp
-#, fuzzy
 msgid "Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Mesafe"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Transition"
-msgstr "Geçiş: "
+msgstr "Geçiş"
 
 #: scene/resources/environment.cpp
 msgid "DOF Near Blur"
@@ -26984,14 +26649,12 @@ msgid "Brightness"
 msgstr "Işık"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Saturation"
-msgstr "Ayrım:"
+msgstr "Doygunluk"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Color Correction"
-msgstr "Renk işlevi."
+msgstr "Renk Düzeltme"
 
 #: scene/resources/font.cpp
 #, fuzzy
@@ -27073,9 +26736,8 @@ msgid "Disable Ambient Light"
 msgstr "Sağa Girintile"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Ensure Correct Normals"
-msgstr "Dönüşüm Durduruldu."
+msgstr "Doğru Normalleri Sağla"
 
 #: scene/resources/material.cpp
 msgid "Albedo Tex MSDF"
@@ -27095,9 +26757,8 @@ msgid "Is sRGB"
 msgstr ""
 
 #: scene/resources/material.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "Parameters"
-msgstr "Parametre Değiştirildi:"
+msgstr "Parametreler"
 
 #: scene/resources/material.cpp
 #, fuzzy
@@ -27139,9 +26800,8 @@ msgid "Grow"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Grow Amount"
-msgstr "Değer:"
+msgstr "Büyüme Miktarı"
 
 #: scene/resources/material.cpp
 msgid "Use Alpha Scissor"
@@ -27244,7 +26904,7 @@ msgstr ""
 #: scene/resources/material.cpp
 #, fuzzy
 msgid "Transmission"
-msgstr "Geçiş: "
+msgstr "Aktarma"
 
 #: scene/resources/material.cpp
 #, fuzzy
@@ -27312,14 +26972,12 @@ msgid "NavMesh Transform"
 msgstr "Dönüşümü Temizle"
 
 #: scene/resources/multimesh.cpp
-#, fuzzy
 msgid "Color Format"
-msgstr "Renk operatörü."
+msgstr "Renk Biçimi"
 
 #: scene/resources/multimesh.cpp
-#, fuzzy
 msgid "Transform Format"
-msgstr "Dönüşüm Durduruldu."
+msgstr "Dönüşüm Biçimi"
 
 #: scene/resources/multimesh.cpp
 msgid "Custom Data Format"
@@ -27335,9 +26993,8 @@ msgid "Visible Instance Count"
 msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Sampling"
-msgstr "Ölçekleniyor: "
+msgstr "Örnekleme"
 
 #: scene/resources/navigation_mesh.cpp
 #, fuzzy
@@ -27345,9 +27002,8 @@ msgid "Partition Type"
 msgstr "Değişken Tipini Ayarla"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Parsed Geometry Type"
-msgstr "Geometri Ayrıştırılıyor..."
+msgstr "Çözümlenmiş Geometri Tipi"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Source Geometry Mode"
@@ -27363,9 +27019,8 @@ msgid "Cells"
 msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Agents"
-msgstr "Ana Sahne Değiştirgenleri:"
+msgstr "Ajanlar"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Max Climb"
@@ -27404,9 +27059,8 @@ msgid "Details"
 msgstr "Varsayılanı Göster"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Sample Distance"
-msgstr "Uzaklık Seç:"
+msgstr "Örnek Mesafe"
 
 #: scene/resources/navigation_mesh.cpp
 #, fuzzy
@@ -27437,7 +27091,7 @@ msgstr "Kaydırma:"
 
 #: scene/resources/occluder_shape.cpp
 msgid "Spheres"
-msgstr ""
+msgstr "Küreler"
 
 #: scene/resources/occluder_shape.cpp
 msgid "OccluderShapeSphere Set Spheres"
@@ -27477,14 +27131,12 @@ msgid "Color Modifier"
 msgstr "Serbest Bakış Hız Değiştirici"
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Point Texture"
-msgstr "Emisyon Noktaları:"
+msgstr "Nokta Dokusu"
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Normal Texture"
-msgstr "Emisyon Kaynağı: "
+msgstr "Normal Doku"
 
 #: scene/resources/particles_material.cpp
 #, fuzzy
@@ -27497,9 +27149,8 @@ msgid "Point Count"
 msgstr "Giriş Portu Ekle"
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Scale Random"
-msgstr "Ölçek Oranı:"
+msgstr "Rastgele Ölçeklendir"
 
 #: scene/resources/particles_material.cpp
 #, fuzzy
@@ -27515,9 +27166,8 @@ msgid "Absorbent"
 msgstr ""
 
 #: scene/resources/plane_shape.cpp
-#, fuzzy
 msgid "Plane"
-msgstr "Sekme:"
+msgstr "Uçak"
 
 #: scene/resources/primitive_meshes.cpp
 #, fuzzy
@@ -27541,9 +27191,8 @@ msgid "Subdivide Depth"
 msgstr ""
 
 #: scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Top Radius"
-msgstr "Yarıçap:"
+msgstr "Üst Yarıçap"
 
 #: scene/resources/primitive_meshes.cpp
 #, fuzzy
@@ -27556,8 +27205,9 @@ msgid "Left To Right"
 msgstr "Sağ Üst"
 
 #: scene/resources/primitive_meshes.cpp
+#, fuzzy
 msgid "Is Hemisphere"
-msgstr ""
+msgstr "Yarım Küre Mi"
 
 #: scene/resources/primitive_meshes.cpp
 #, fuzzy
@@ -27606,9 +27256,8 @@ msgid "Top Color"
 msgstr "Sonraki Zemin"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Horizon Color"
-msgstr "Dosya Depolama:"
+msgstr "Horizon Renk"
 
 #: scene/resources/sky.cpp
 #, fuzzy
@@ -27688,9 +27337,8 @@ msgid "Base Texture"
 msgstr "Dokuyu Kaldır"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "Image Size"
-msgstr "Sayfa: "
+msgstr "Görüntü Boyutu"
 
 #: scene/resources/texture.cpp
 #, fuzzy
@@ -27718,9 +27366,8 @@ msgid "Lossy Storage Quality"
 msgstr "Yakala"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "From"
-msgstr "Oynatma Modu:"
+msgstr "Kimden"
 
 #: scene/resources/texture.cpp
 #, fuzzy
@@ -27890,7 +27537,7 @@ msgstr "Deneme"
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
 #, fuzzy
 msgid "Default Edge Connection Margin"
-msgstr "Bağlantıyı Düzenle:"
+msgstr "Varsayılan Kenar Bağlantı Marjı"
 
 #: scene/resources/world_2d.cpp
 msgid "Canvas"
@@ -28076,7 +27723,7 @@ msgstr ""
 #: servers/audio/effects/audio_effect_spectrum_analyzer.cpp
 #, fuzzy
 msgid "FFT Size"
-msgstr "Boyut:"
+msgstr "FFT Boyutu"
 
 #: servers/audio/effects/audio_effect_reverb.cpp
 msgid "Predelay"
@@ -28104,9 +27751,8 @@ msgid "Pan Pullout"
 msgstr ""
 
 #: servers/audio/effects/audio_effect_stereo_enhance.cpp
-#, fuzzy
 msgid "Time Pullout (ms)"
-msgstr "Zaman aşımı."
+msgstr "Zaman Çıkışı (ms)"
 
 #: servers/audio/effects/audio_effect_stereo_enhance.cpp
 msgid "Surround"
@@ -28292,9 +27938,8 @@ msgid "Constants cannot be modified."
 msgstr "Sabit değerler değiştirilemez."
 
 #: servers/visual/visual_server_scene.cpp
-#, fuzzy
 msgid "Spatial Partitioning"
-msgstr "Bölümleniyor..."
+msgstr "Uzaysal Ayırma"
 
 #: servers/visual_server.cpp
 #, fuzzy
@@ -28458,7 +28103,7 @@ msgstr "Ara Değerleme Kipi"
 #: servers/visual_server.cpp
 #, fuzzy
 msgid "OpenGL"
-msgstr "Aç"
+msgstr "OpenGL"
 
 #: servers/visual_server.cpp
 msgid "Batching Send Null"
@@ -28467,7 +28112,7 @@ msgstr ""
 #: servers/visual_server.cpp
 #, fuzzy
 msgid "Batching Stream"
-msgstr "Tümden Yeniden Adlandır"
+msgstr "Yığınlama Akışı"
 
 #: servers/visual_server.cpp
 msgid "Legacy Orphan Buffers"
@@ -28482,13 +28127,14 @@ msgid "Batching"
 msgstr "Yığınlama"
 
 #: servers/visual_server.cpp
+#, fuzzy
 msgid "Use Batching"
-msgstr ""
+msgstr "Yığınlama Kullan"
 
 #: servers/visual_server.cpp
 #, fuzzy
 msgid "Use Batching In Editor"
-msgstr "Editörün güncellenmesi"
+msgstr "Editörde Yığınlama Kullan"
 
 #: servers/visual_server.cpp
 msgid "Single Rect Fallback"
@@ -28507,13 +28153,13 @@ msgid "Scissor Area Threshold"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Max Join Items"
-msgstr "Öğeleri Yönet..."
+msgstr "Maksimum Birleşen Maddeler"
 
 #: servers/visual_server.cpp
+#, fuzzy
 msgid "Batch Buffer Size"
-msgstr ""
+msgstr "Yığınlama Arabellek Boyutu"
 
 #: servers/visual_server.cpp
 msgid "Item Reordering Lookahead"
@@ -28526,7 +28172,7 @@ msgstr ""
 #: servers/visual_server.cpp
 #, fuzzy
 msgid "Diagnose Frame"
-msgstr "Çerçeveyi Yapıştır"
+msgstr "Kareyi Tespit Et"
 
 #: servers/visual_server.cpp
 msgid "GLES2"
@@ -28586,7 +28232,7 @@ msgstr "Emilme Ayırmayı Görüntüle"
 
 #: servers/visual_server.cpp
 msgid "Max Active Spheres"
-msgstr "Maks. Aktif Küre Sayısı"
+msgstr "Maksimum Aktif Küre Sayısı"
 
 #: servers/visual_server.cpp
 msgid "Max Active Polygons"
@@ -28598,8 +28244,9 @@ msgid "Shader Compilation Mode"
 msgstr "Ara Değerleme Kipi"
 
 #: servers/visual_server.cpp
+#, fuzzy
 msgid "Max Simultaneous Compiles"
-msgstr ""
+msgstr "Maksimum Eşzamanlı Derleme"
 
 #: servers/visual_server.cpp
 msgid "Log Active Async Compiles Count"
diff --git a/editor/translations/uk.po b/editor/translations/uk.po
index d87aa168d7..fe0bc96c04 100644
--- a/editor/translations/uk.po
+++ b/editor/translations/uk.po
@@ -11,7 +11,7 @@
 # Олександр Пилипчук <pilipchukap@rambler.ru>, 2018.
 # Kirill Omelchenko <kirill.omelchenko@gmail.com>, 2018.
 # Александр <ol-vin@mail.ru>, 2018.
-# Богдан Матвіїв <bomtvv@gmail.com>, 2019.
+# Богдан Матвіїв <bomtvv@gmail.com>, 2019, 2022.
 # Tymofij Lytvynenko <till.svit@gmail.com>, 2020, 2021.
 # Vladislav Glinsky <cl0ne@mithril.org.ua>, 2020.
 # Микола Тимошенко <9081@ukr.net>, 2020.
@@ -29,7 +29,7 @@ msgstr ""
 "Project-Id-Version: Ukrainian (Godot Engine)\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-26 01:55+0000\n"
+"PO-Revision-Date: 2022-08-25 13:04+0000\n"
 "Last-Translator: Artem <artem@molotov.work>\n"
 "Language-Team: Ukrainian <https://hosted.weblate.org/projects/godot-engine/"
 "godot/uk/>\n"
@@ -412,9 +412,8 @@ msgid "Command"
 msgstr "Команда"
 
 #: core/os/input_event.cpp
-#, fuzzy
 msgid "Physical"
-msgstr " (фізичний)"
+msgstr "Фізичний"
 
 #: core/os/input_event.cpp scene/2d/touch_screen_button.cpp
 #: scene/gui/base_button.cpp scene/gui/texture_button.cpp
@@ -469,7 +468,7 @@ msgstr "Тиск"
 #: core/os/input_event.cpp
 #, fuzzy
 msgid "Pen Inverted"
-msgstr "Інвертувати"
+msgstr "Перо перевернуте"
 
 #: core/os/input_event.cpp
 msgid "Relative"
@@ -2757,9 +2756,8 @@ msgid "Project export for platform:"
 msgstr "Експортування проєкту для платформи:"
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "Завершено з помилками."
+msgstr "Завершено з попередженнями."
 
 #: editor/editor_export.cpp
 msgid "Completed successfully."
@@ -4492,6 +4490,7 @@ msgstr "Різні проєктні або сценографічні інстр
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Проєкт"
 
@@ -4635,7 +4634,7 @@ msgid ""
 msgstr ""
 "Якщо цей параметр увімкнено, будь-які зміни, внесені у сцену в редакторі, "
 "будуть відтворені у запущеному проєкті.\n"
-"При віддаленому використанні на пристрої, це більш ефективно з мережевою "
+"При віддаленому використанні на пристрої, це ефективніше з мережевою "
 "файловою системою."
 
 #: editor/editor_node.cpp
@@ -4651,7 +4650,7 @@ msgid ""
 msgstr ""
 "Якщо цей параметр увімкнено, будь-який скрипт, який буде збережено, буде "
 "перезавантажено у запущеному проєкті.\n"
-"При віддаленому використанні на пристрої, це більш ефективно з мережевою "
+"При віддаленому використанні на пристрої, це ефективніше з мережевою "
 "файловою системою."
 
 #: editor/editor_node.cpp
@@ -5499,11 +5498,12 @@ msgstr "Додаткові кнопки миші для навігації жу�
 #: editor/editor_settings.cpp
 #, fuzzy
 msgid "Drag And Drop Selection"
-msgstr "Вибір GridMap"
+msgstr "Перетягніть виділення"
 
 #: editor/editor_settings.cpp
+#, fuzzy
 msgid "Stay In Script Editor On Node Selected"
-msgstr ""
+msgstr "Залишитися в редакторі скриптів на вибраному вузлі"
 
 #: editor/editor_settings.cpp
 msgid "Appearance"
@@ -7269,7 +7269,8 @@ msgid "8 Bit"
 msgstr "8-бітова"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Моно"
 
@@ -9366,7 +9367,7 @@ msgstr "Плаский 0"
 
 #: editor/plugins/curve_editor_plugin.cpp
 msgid "Flat 1"
-msgstr "Площина 1"
+msgstr "Плоский 1"
 
 #: editor/plugins/curve_editor_plugin.cpp editor/property_editor.cpp
 msgid "Ease In"
@@ -11618,9 +11619,8 @@ msgid "New Animation"
 msgstr "Нова анімація"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
-#, fuzzy
 msgid "Filter animations"
-msgstr "Фільтрувати методи"
+msgstr "Фільтрувати анімації"
 
 #: editor/plugins/sprite_frames_editor_plugin.cpp
 msgid "Speed:"
@@ -15270,16 +15270,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "Зробити локальним"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr "Цю унікальну назву у сцені вже використано іншим вузлом."
-
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
 msgstr "Увімкнути унікальну назву сцени"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Unique names already used by another node in the scene:"
+msgstr "Цю унікальну назву у сцені вже використано іншим вузлом."
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Вимкнути унікальна назва сцени"
 
 #: editor/scene_tree_dock.cpp
@@ -15480,6 +15483,10 @@ msgid "Button Group"
 msgstr "Група кнопок"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "Вимкнути унікальна назва сцени"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "(Джерело з'єднання)"
 
@@ -15558,6 +15565,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Некоректна назва вузла. Не можна використовувати такі символи:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "Цю унікальну назву у сцені вже використано іншим вузлом."
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Перейменувати вузол"
 
@@ -16837,12 +16848,14 @@ msgid "Sparse Indices Component Type"
 msgstr "Тип компонентів індексів розсіювання"
 
 #: modules/gltf/gltf_accessor.cpp
+#, fuzzy
 msgid "Sparse Values Buffer View"
-msgstr ""
+msgstr "Буферне подання розріджених значень"
 
 #: modules/gltf/gltf_accessor.cpp
+#, fuzzy
 msgid "Sparse Values Byte Offset"
-msgstr ""
+msgstr "Зміщення байтів розріджених значень"
 
 #: modules/gltf/gltf_buffer_view.cpp
 msgid "Buffer"
@@ -16854,7 +16867,7 @@ msgstr "Байтова довжина"
 
 #: modules/gltf/gltf_buffer_view.cpp
 msgid "Byte Stride"
-msgstr ""
+msgstr "Байтовий крок"
 
 #: modules/gltf/gltf_buffer_view.cpp
 msgid "Indices"
@@ -16953,8 +16966,9 @@ msgid "Joints Original"
 msgstr "Початок з'єднання"
 
 #: modules/gltf/gltf_skin.cpp
+#, fuzzy
 msgid "Inverse Binds"
-msgstr ""
+msgstr "Зворотні зв'язки"
 
 #: modules/gltf/gltf_skin.cpp
 msgid "Non Joints"
@@ -17340,6 +17354,21 @@ msgstr "Зібрати рішення"
 msgid "Auto Update Project"
 msgstr "Проєкт без назви"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Показана назва"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Виберіть каталог"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Виберіть каталог"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "Кінець трасування стека для внутрішнього виключення"
@@ -19132,6 +19161,11 @@ msgstr "Нетиповий колір тла"
 msgid "Custom BG Color"
 msgstr "Нетиповий колір тла"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Експортування піктограми"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19984,6 +20018,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Некоректна скорочена назва пакунка."
 
@@ -20218,7 +20258,7 @@ msgstr ""
 
 #: platform/windows/export/export.cpp
 msgid "Windows"
-msgstr "Вікна"
+msgstr "Windows"
 
 #: platform/windows/export/export.cpp
 msgid "Rcedit"
@@ -25748,7 +25788,7 @@ msgstr "7"
 
 #: scene/resources/environment.cpp
 msgid "Bloom"
-msgstr "Цвітіння"
+msgstr "Світіння"
 
 #: scene/resources/environment.cpp
 msgid "HDR Threshold"
diff --git a/editor/translations/ur_PK.po b/editor/translations/ur_PK.po
index a428250cc7..d09218a600 100644
--- a/editor/translations/ur_PK.po
+++ b/editor/translations/ur_PK.po
@@ -4449,6 +4449,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr ""
 
@@ -7232,7 +7233,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15193,18 +15195,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "ریموٹ "
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "ریموٹ "
 
 #: editor/scene_tree_dock.cpp
@@ -15404,6 +15406,11 @@ msgstr ""
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "ریموٹ "
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr ".تمام کا انتخاب"
 
@@ -15468,6 +15475,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -17334,6 +17345,20 @@ msgstr ".تمام کا انتخاب"
 msgid "Auto Update Project"
 msgstr ".تمام کا انتخاب"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "ایکشن منتقل کریں"
+
+#: modules/mono/godotsharp_dirs.cpp
+msgid "Solution Directory"
+msgstr ""
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "سب سکریپشن بنائیں"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19109,6 +19134,11 @@ msgstr "ایکشن منتقل کریں"
 msgid "Custom BG Color"
 msgstr "ایکشن منتقل کریں"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr ".سپورٹ"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19931,6 +19961,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr ""
 
diff --git a/editor/translations/vi.po b/editor/translations/vi.po
index 0a6885872f..2a0fadcf9f 100644
--- a/editor/translations/vi.po
+++ b/editor/translations/vi.po
@@ -21,13 +21,14 @@
 # IoeCmcomc <hopdaigia2004@gmail.com>, 2021, 2022.
 # Hung <hungthitkhia@gmail.com>, 2021.
 # Paweł Fertyk <pfertyk@pfertyk.me>, 2022.
+# MInhTriet <luckyblockblack@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-05-10 13:14+0000\n"
-"Last-Translator: Paweł Fertyk <pfertyk@pfertyk.me>\n"
+"PO-Revision-Date: 2022-08-17 18:20+0000\n"
+"Last-Translator: MInhTriet <luckyblockblack@gmail.com>\n"
 "Language-Team: Vietnamese <https://hosted.weblate.org/projects/godot-engine/"
 "godot/vi/>\n"
 "Language: vi\n"
@@ -35,44 +36,44 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.12.1\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
-msgstr ""
+msgstr "Trình điều khiển màn hình"
 
 #: core/bind/core_bind.cpp
 msgid "Clipboard"
-msgstr "Bảng tạm"
+msgstr "Bộ nhớ tạm"
 
 #: core/bind/core_bind.cpp
 msgid "Current Screen"
-msgstr "Màn hình hiện tại"
+msgstr "Màn hình hiện có"
 
 #: core/bind/core_bind.cpp
 msgid "Exit Code"
-msgstr "Mã thoát"
+msgstr "Mã lỗi"
 
 #: core/bind/core_bind.cpp
 msgid "V-Sync Enabled"
-msgstr "Sử dụng V-Sync"
+msgstr "V-sync Enabled"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "V-Sync Via Compositor"
-msgstr ""
+msgstr "V-Sync thông qua Compositor"
 
 #: core/bind/core_bind.cpp main/main.cpp
+#, fuzzy
 msgid "Delta Smoothing"
-msgstr "Làm mượt delta"
+msgstr "Delta smoothing"
 
 #: core/bind/core_bind.cpp
-#, fuzzy
 msgid "Low Processor Usage Mode"
-msgstr "Chế độ Di chuyển"
+msgstr "Chế độ tiết kiệm của bộ vi xử lý"
 
 #: core/bind/core_bind.cpp
 msgid "Low Processor Usage Mode Sleep (µsec)"
-msgstr ""
+msgstr "Chế độ tiết kiệm năng lượng bộ vi xử lý (tính bằng µsec)"
 
 #: core/bind/core_bind.cpp main/main.cpp platform/uwp/os_uwp.cpp
 msgid "Keep Screen On"
@@ -80,11 +81,11 @@ msgstr "Giữ màn hình mở"
 
 #: core/bind/core_bind.cpp
 msgid "Min Window Size"
-msgstr "Cỡ cửa sổ tối thiểu"
+msgstr "Kính cỡ nhỏ nhất của màn hình"
 
 #: core/bind/core_bind.cpp
 msgid "Max Window Size"
-msgstr "Cỡ cửa sổ tối đa"
+msgstr "Kích cỡ tối đa của màn hình"
 
 #: core/bind/core_bind.cpp
 msgid "Screen Orientation"
@@ -97,11 +98,11 @@ msgstr "Cửa sổ"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp
 msgid "Borderless"
-msgstr "Tràn viền"
+msgstr "Không có viền cửa sổ"
 
 #: core/bind/core_bind.cpp
 msgid "Per Pixel Transparency Enabled"
-msgstr "Bật độ trong suốt mỗi điểm ảnh"
+msgstr "Chế độ trong suốt từng pixel đã được bật"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp
 msgid "Fullscreen"
@@ -109,11 +110,11 @@ msgstr "Toàn màn hình"
 
 #: core/bind/core_bind.cpp
 msgid "Maximized"
-msgstr "Đã cực đại hoá"
+msgstr "Đã phóng to"
 
 #: core/bind/core_bind.cpp
 msgid "Minimized"
-msgstr "Đã cực tiểu hoá"
+msgstr "Đã thu nhỏ"
 
 #: core/bind/core_bind.cpp core/project_settings.cpp scene/gui/dialogs.cpp
 #: scene/gui/graph_node.cpp
@@ -142,7 +143,7 @@ msgstr "Kích thước"
 
 #: core/bind/core_bind.cpp
 msgid "Endian Swap"
-msgstr ""
+msgstr "Hoán đổi endian"
 
 #: core/bind/core_bind.cpp
 msgid "Editor Hint"
@@ -158,7 +159,7 @@ msgstr "Số lần lặp mỗi giây"
 
 #: core/bind/core_bind.cpp
 msgid "Target FPS"
-msgstr "FPS mục tiêu:"
+msgstr "FPS cần đạt tới"
 
 #: core/bind/core_bind.cpp
 #, fuzzy
@@ -4516,6 +4517,7 @@ msgstr "Dự án ngoài lề hoặc các công cụ toàn phân cảnh."
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "Dự Án"
 
@@ -7393,7 +7395,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15491,18 +15494,19 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Tên Node:"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Unique names already used by another node in the scene:"
+msgstr "Tên đã được sử dụng bởi func/var/signal khác:"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "Tên Node:"
 
 #: editor/scene_tree_dock.cpp
@@ -15705,6 +15709,11 @@ msgstr "Thêm vào Nhóm"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Tên Node:"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "Kết nối bị lỗi"
 
@@ -15780,6 +15789,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "Tên nút không hợp lệ, các ký tự sau bị cấm:"
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "Đổi tên nút"
 
@@ -17713,6 +17726,21 @@ msgstr "Chọn tất cả"
 msgid "Auto Update Project"
 msgstr "Dự án không tên"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "Hiển thị tất cả"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "Chọn một Thư mục"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "Chọn một Thư mục"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19579,6 +19607,11 @@ msgstr "Cắt các nút"
 msgid "Custom BG Color"
 msgstr "Cắt các nút"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "Mở rộng Tất cả"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20436,6 +20469,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "Gói có tên ngắn không hợp lệ."
 
diff --git a/editor/translations/zh_CN.po b/editor/translations/zh_CN.po
index f25a372128..86a37e167f 100644
--- a/editor/translations/zh_CN.po
+++ b/editor/translations/zh_CN.po
@@ -89,7 +89,7 @@ msgstr ""
 "Project-Id-Version: Chinese (Simplified) (Godot Engine)\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: 2018-01-20 12:15+0200\n"
-"PO-Revision-Date: 2022-07-29 01:36+0000\n"
+"PO-Revision-Date: 2022-08-25 13:04+0000\n"
 "Last-Translator: Haoyu Qiu <timothyqiu32@gmail.com>\n"
 "Language-Team: Chinese (Simplified) <https://hosted.weblate.org/projects/"
 "godot-engine/godot/zh_Hans/>\n"
@@ -2791,9 +2791,8 @@ msgid "Project export for platform:"
 msgstr "针对平台导出项目："
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "已完成，存在错误。"
+msgstr "已完成，存在警告。"
 
 #: editor/editor_export.cpp
 msgid "Completed successfully."
@@ -4466,6 +4465,7 @@ msgstr "其他项目或全场景工具。"
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "项目"
 
@@ -7189,7 +7189,8 @@ msgid "8 Bit"
 msgstr "8 位"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Mono"
 
@@ -15020,16 +15021,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "转为本地"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr "该场景中已有使用该唯一名称的节点。"
-
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
 msgstr "启用场景唯一名称"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Unique names already used by another node in the scene:"
+msgstr "该场景中已有使用该唯一名称的节点。"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "禁用场景唯一名称"
 
 #: editor/scene_tree_dock.cpp
@@ -15223,6 +15227,10 @@ msgid "Button Group"
 msgstr "按钮组"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "禁用场景唯一名称"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "（连接来源）"
 
@@ -15300,6 +15308,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "节点名称无效，不允许包含以下字符："
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "该场景中已有使用该唯一名称的节点。"
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "重命名节点"
 
@@ -17073,6 +17085,21 @@ msgstr "构建解决方案"
 msgid "Auto Update Project"
 msgstr "自动更新项目"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "显示名称"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "选择目录"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "选择目录"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "内部异常堆栈追朔结束"
@@ -18773,6 +18800,11 @@ msgstr "使用自定义背景色"
 msgid "Custom BG Color"
 msgstr "自定义背景色"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "导出图标"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 msgid "Prepare Templates"
@@ -19557,6 +19589,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr "在正方形 310×310 上显示名称"
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "无效的包短名称。"
 
@@ -19681,21 +19719,17 @@ msgid "Could not find wine executable at \"%s\"."
 msgstr "无法在“%s”找到 wine 可执行文件。"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid ""
 "Could not start rcedit executable. Configure rcedit path in the Editor "
 "Settings (Export > Windows > Rcedit), or disable \"Application > Modify "
 "Resources\" in the export preset."
 msgstr ""
-"无法启动 rcedit 可执行文件，请在编辑器设置中配置 rcedit 路径（导出 > Windows "
-"> Rcedit）。"
+"无法启动 rcedit 可执行文件。请在编辑器设置中配置 rcedit 路径（导出 > Windows "
+"> Rcedit），或在导出预设中禁用“应用 > 修改资源”。"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "rcedit failed to modify executable: %s."
-msgstr ""
-"rcedit 修改可执行文件失败：\n"
-"%s"
+msgstr "rcedit 修改可执行文件失败：%s。"
 
 #: platform/windows/export/export.cpp
 msgid "Could not find signtool executable at \"%s\"."
@@ -19714,21 +19748,17 @@ msgid "Invalid timestamp server."
 msgstr "时间戳服务器无效。"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid ""
 "Could not start signtool executable. Configure signtool path in the Editor "
 "Settings (Export > Windows > Signtool), or disable \"Codesign\" in the "
 "export preset."
 msgstr ""
-"无法启动 signtool 可执行文件，请在编辑器设置中配置 signtool 路径（导出 > "
-"Windows > Signtool）。"
+"无法启动 signtool 可执行文件。请在编辑器设置中配置 signtool 路径（导出 > "
+"Windows > Signtool），或在导出预设中禁用“代码签名”。"
 
 #: platform/windows/export/export.cpp
-#, fuzzy
 msgid "Signtool failed to sign executable: %s."
-msgstr ""
-"Signtool 签名可执行文件失败：\n"
-"%s"
+msgstr "Signtool 签名可执行文件失败：%s。"
 
 #: platform/windows/export/export.cpp
 msgid "Failed to remove temporary file \"%s\"."
@@ -21505,7 +21535,7 @@ msgstr "ConcavePolygonShape 只支持静态模式下的 RigidBody。"
 
 #: scene/3d/cpu_particles.cpp
 msgid "Nothing is visible because no mesh has been assigned."
-msgstr "无物可见，因为没有指定网格。"
+msgstr "未指定网格，无可见内容。"
 
 #: scene/3d/cpu_particles.cpp
 msgid ""
@@ -23470,7 +23500,7 @@ msgstr "最小值"
 
 #: scene/gui/range.cpp scene/resources/curve.cpp
 msgid "Max Value"
-msgstr "最大之"
+msgstr "最大值"
 
 #: scene/gui/range.cpp
 msgid "Page"
@@ -23486,11 +23516,11 @@ msgstr "舍入"
 
 #: scene/gui/range.cpp
 msgid "Allow Greater"
-msgstr "允许更多"
+msgstr "允许更大"
 
 #: scene/gui/range.cpp
 msgid "Allow Lesser"
-msgstr "允许更少"
+msgstr "允许更小"
 
 #: scene/gui/reference_rect.cpp
 msgid "Border Color"
@@ -25296,11 +25326,11 @@ msgstr "公告板保持缩放"
 
 #: scene/resources/material.cpp
 msgid "Grow"
-msgstr "发光"
+msgstr "生长"
 
 #: scene/resources/material.cpp
 msgid "Grow Amount"
-msgstr "发光量"
+msgstr "生长量"
 
 #: scene/resources/material.cpp
 msgid "Use Alpha Scissor"
diff --git a/editor/translations/zh_HK.po b/editor/translations/zh_HK.po
index 79760d0de7..f8529ea3ca 100644
--- a/editor/translations/zh_HK.po
+++ b/editor/translations/zh_HK.po
@@ -4,13 +4,14 @@
 # This file is distributed under the same license as the Godot source code.
 # Wesley (zx-wt) <ZX_WT@ymail.com>, 2016-2017, 2020.
 # cnieFIT <dtotncq@gmail.com>, 2019.
+# Peppa Pig <hansongming88@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2020-05-01 11:43+0000\n"
-"Last-Translator: zx-wt <ZX_WT@ymail.com>\n"
+"PO-Revision-Date: 2022-08-23 03:39+0000\n"
+"Last-Translator: Peppa Pig <hansongming88@gmail.com>\n"
 "Language-Team: Chinese (Traditional, Hong Kong) <https://hosted.weblate.org/"
 "projects/godot-engine/godot/zh_Hant_HK/>\n"
 "Language: zh_HK\n"
@@ -18,7 +19,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.0.2\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -36,7 +37,7 @@ msgstr "未儲存當前場景。仍要開啟？"
 
 #: core/bind/core_bind.cpp
 msgid "Exit Code"
-msgstr ""
+msgstr "退出码"
 
 #: core/bind/core_bind.cpp
 #, fuzzy
@@ -4660,6 +4661,7 @@ msgstr ""
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "專案"
 
@@ -7583,7 +7585,8 @@ msgid "8 Bit"
 msgstr ""
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr ""
 
@@ -15840,18 +15843,18 @@ msgstr ""
 msgid "Make Local"
 msgstr ""
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr ""
-
 #: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Enable Scene Unique Name"
+msgid "Enable Scene Unique Name(s)"
 msgstr "Node名稱"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
+#: editor/scene_tree_dock.cpp
+msgid "Unique names already used by another node in the scene:"
+msgstr ""
+
+#: editor/scene_tree_dock.cpp
 #, fuzzy
-msgid "Disable Scene Unique Name"
+msgid "Disable Scene Unique Name(s)"
 msgstr "Node名稱"
 
 #: editor/scene_tree_dock.cpp
@@ -16061,6 +16064,11 @@ msgstr "按鍵"
 
 #: editor/scene_tree_editor.cpp
 #, fuzzy
+msgid "Disable Scene Unique Name"
+msgstr "Node名稱"
+
+#: editor/scene_tree_editor.cpp
+#, fuzzy
 msgid "(Connecting From)"
 msgstr "連到..."
 
@@ -16125,6 +16133,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr ""
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr ""
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr ""
 
@@ -18052,6 +18064,21 @@ msgstr "所有選項"
 msgid "Auto Update Project"
 msgstr "專案"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "全部取代"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "選擇資料夾"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "選擇資料夾"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr ""
@@ -19877,6 +19904,11 @@ msgstr "貼上"
 msgid "Custom BG Color"
 msgstr "貼上"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "全部展開"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -20725,6 +20757,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 #, fuzzy
 msgid "Invalid package short name."
 msgstr "無效名稱"
diff --git a/editor/translations/zh_TW.po b/editor/translations/zh_TW.po
index 8ad86d4b2a..994c49156e 100644
--- a/editor/translations/zh_TW.po
+++ b/editor/translations/zh_TW.po
@@ -36,13 +36,14 @@
 # 菘菘 <rrt467778@gmail.com>, 2022.
 # marktwtn <marktwtn@gmail.com>, 2022.
 # Shi-Xun Hong <jimmy3421@gmail.com>, 2022.
+# Hugel <qihu@nfschina.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine editor\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-31 18:34+0000\n"
-"Last-Translator: BinotaLIU <me@binota.org>\n"
+"PO-Revision-Date: 2022-09-07 06:16+0000\n"
+"Last-Translator: Chia-Hsiang Cheng <cche0109@student.monash.edu>\n"
 "Language-Team: Chinese (Traditional) <https://hosted.weblate.org/projects/"
 "godot-engine/godot/zh_Hant/>\n"
 "Language: zh_TW\n"
@@ -50,7 +51,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.14-dev\n"
+"X-Generator: Weblate 4.14.1-dev\n"
 
 #: core/bind/core_bind.cpp main/main.cpp
 msgid "Tablet Driver"
@@ -2743,9 +2744,8 @@ msgid "Project export for platform:"
 msgstr "專案匯出平台："
 
 #: editor/editor_export.cpp
-#, fuzzy
 msgid "Completed with warnings."
-msgstr "已完成，存在錯誤。"
+msgstr "完成並帶有警告。"
 
 #: editor/editor_export.cpp
 msgid "Completed successfully."
@@ -4147,7 +4147,7 @@ msgstr "刪除配置"
 #: editor/editor_node.cpp editor/import_dock.cpp
 #: editor/script_create_dialog.cpp
 msgid "Default"
-msgstr "預設"
+msgstr "默認"
 
 #: editor/editor_node.cpp editor/editor_resource_picker.cpp
 #: editor/plugins/script_editor_plugin.cpp editor/property_editor.cpp
@@ -4420,6 +4420,7 @@ msgstr "其他專案或全場景共通工具。"
 
 #: editor/editor_node.cpp editor/project_manager.cpp
 #: editor/script_create_dialog.cpp modules/mono/editor/csharp_project.cpp
+#: modules/mono/godotsharp_dirs.cpp
 msgid "Project"
 msgstr "專案"
 
@@ -7142,7 +7143,8 @@ msgid "8 Bit"
 msgstr "8位元組"
 
 #: editor/import/resource_importer_wav.cpp main/main.cpp
-#: modules/mono/editor/csharp_project.cpp modules/mono/mono_gd/gd_mono.cpp
+#: modules/mono/editor/csharp_project.cpp modules/mono/godotsharp_dirs.cpp
+#: modules/mono/mono_gd/gd_mono.cpp
 msgid "Mono"
 msgstr "Mono"
 
@@ -14973,16 +14975,19 @@ msgstr ""
 msgid "Make Local"
 msgstr "轉為本地"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Another node already uses this unique name in the scene."
-msgstr "另一個節點已在該場景中使用了這個不可重複的名稱。"
-
 #: editor/scene_tree_dock.cpp
-msgid "Enable Scene Unique Name"
+#, fuzzy
+msgid "Enable Scene Unique Name(s)"
 msgstr "啟用場景獨立名稱"
 
-#: editor/scene_tree_dock.cpp editor/scene_tree_editor.cpp
-msgid "Disable Scene Unique Name"
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Unique names already used by another node in the scene:"
+msgstr "另一個節點已在該場景中使用了這個不可重複的名稱。"
+
+#: editor/scene_tree_dock.cpp
+#, fuzzy
+msgid "Disable Scene Unique Name(s)"
 msgstr "停用場景獨立名稱"
 
 #: editor/scene_tree_dock.cpp
@@ -15176,6 +15181,10 @@ msgid "Button Group"
 msgstr "按鍵分組"
 
 #: editor/scene_tree_editor.cpp
+msgid "Disable Scene Unique Name"
+msgstr "停用場景獨立名稱"
+
+#: editor/scene_tree_editor.cpp
 msgid "(Connecting From)"
 msgstr "（連接自）"
 
@@ -15253,6 +15262,10 @@ msgid "Invalid node name, the following characters are not allowed:"
 msgstr "無效的節點名稱，名稱不可包含下列字元："
 
 #: editor/scene_tree_editor.cpp
+msgid "Another node already uses this unique name in the scene."
+msgstr "另一個節點已在該場景中使用了這個不可重複的名稱。"
+
+#: editor/scene_tree_editor.cpp
 msgid "Rename Node"
 msgstr "重新命名節點"
 
@@ -15669,47 +15682,44 @@ msgid "Navigation Edge Disabled"
 msgstr "已禁用導航邊界"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Navigation Solid"
-msgstr "導航模式"
+msgstr "導航實體"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Navigation Solid Disabled"
-msgstr "導航模式"
+msgstr "停用導航實體"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Joint Body A"
-msgstr ""
+msgstr "關節形體A"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Joint Body B"
-msgstr ""
+msgstr "關節形體B"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Room Edge"
-msgstr ""
+msgstr "空間邊緣"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Room Overlap"
-msgstr ""
+msgstr "空間重疊"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Set Room Point Position"
 msgstr "設定空間控制點位置"
 
 #: editor/spatial_editor_gizmos.cpp scene/3d/portal.cpp
-#, fuzzy
 msgid "Portal Margin"
-msgstr "設定外邊距"
+msgstr "入口邊距"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Edge"
-msgstr ""
+msgstr "入口邊緣"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Arrow"
-msgstr ""
+msgstr "入口箭頭"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Set Portal Point Position"
@@ -15717,18 +15727,16 @@ msgstr "設定入口控制點位置"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Portal Front"
-msgstr ""
+msgstr "入口正面"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Portal Back"
-msgstr "上一頁"
+msgstr "入口背面"
 
 #: editor/spatial_editor_gizmos.cpp scene/2d/light_occluder_2d.cpp
 #: scene/2d/tile_map.cpp
-#, fuzzy
 msgid "Occluder"
-msgstr "遮擋模式"
+msgstr "遮擋器"
 
 #: editor/spatial_editor_gizmos.cpp
 msgid "Set Occluder Sphere Radius"
@@ -15739,109 +15747,98 @@ msgid "Set Occluder Sphere Position"
 msgstr "設定遮擋球體位置"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Set Occluder Polygon Point Position"
-msgstr "設定入口控制點位置"
+msgstr "設定遮擋器多邊形頂點位置"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Set Occluder Hole Point Position"
-msgstr "設定曲線控制點位置"
+msgstr "設定遮擋器空洞頂點位置"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Occluder Polygon Front"
-msgstr "建立遮光多邊形"
+msgstr "遮擋器多邊形正面"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Occluder Polygon Back"
-msgstr "建立遮光多邊形"
+msgstr "遮擋器多邊形背面"
 
 #: editor/spatial_editor_gizmos.cpp
-#, fuzzy
 msgid "Occluder Hole"
-msgstr "建立遮光多邊形"
+msgstr "遮擋器空洞"
 
 #: main/main.cpp
 msgid "Godot Physics"
-msgstr ""
+msgstr "Godot 物理"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_sw.cpp
 #: servers/visual/visual_server_scene.cpp
 msgid "Use BVH"
-msgstr ""
+msgstr "使用 BVH"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_sw.cpp
 #: servers/visual/visual_server_scene.cpp
-#, fuzzy
 msgid "BVH Collision Margin"
-msgstr "碰撞模式"
+msgstr "BVH 碰撞邊距"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Crash Handler"
-msgstr "設定處理程式"
+msgstr "當機處理常式"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Multithreaded Server"
-msgstr "多節點組"
+msgstr "多執行緒伺服器"
 
 #: main/main.cpp
 msgid "RID Pool Prealloc"
-msgstr ""
+msgstr "RID集區預配置"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Debugger stdout"
-msgstr "除錯工具"
+msgstr "除錯工具標準輸出"
 
 #: main/main.cpp
 msgid "Max Chars Per Second"
-msgstr ""
+msgstr "每秒最大字元數"
 
 #: main/main.cpp
 msgid "Max Messages Per Frame"
-msgstr ""
+msgstr "每影格最大訊息數"
 
 #: main/main.cpp
 msgid "Max Errors Per Second"
-msgstr ""
+msgstr "每秒最大錯誤數"
 
 #: main/main.cpp
 msgid "Max Warnings Per Second"
-msgstr ""
+msgstr "每秒最大警告數"
 
 #: main/main.cpp
 msgid "Flush stdout On Print"
-msgstr ""
+msgstr "列印時刷新標準輸出"
 
 #: main/main.cpp servers/visual_server.cpp
 msgid "Logging"
-msgstr ""
+msgstr "記錄"
 
 #: main/main.cpp
 msgid "File Logging"
-msgstr ""
+msgstr "檔案記錄"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Enable File Logging"
-msgstr "啟用條件篩選"
+msgstr "啟用檔案紀錄"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Log Path"
-msgstr "複製路徑"
+msgstr "紀錄路徑"
 
 #: main/main.cpp
 msgid "Max Log Files"
-msgstr ""
+msgstr "最大紀錄檔案數"
 
 #: main/main.cpp
 msgid "Driver"
-msgstr ""
+msgstr "驅動程式"
 
 #: main/main.cpp
 msgid "Driver Name"
@@ -15849,85 +15846,77 @@ msgstr "驅動名稱"
 
 #: main/main.cpp
 msgid "Fallback To GLES2"
-msgstr ""
+msgstr "回降至 GLES2"
 
 #: main/main.cpp
 msgid "Use Nvidia Rect Flicker Workaround"
-msgstr ""
+msgstr "使用Nvidia Rect閃爍解決方法"
 
 #: main/main.cpp
 msgid "DPI"
-msgstr ""
+msgstr "DPI"
 
 #: main/main.cpp
 msgid "Allow hiDPI"
-msgstr ""
+msgstr "允許 hiDPI"
 
 #: main/main.cpp
-#, fuzzy
 msgid "V-Sync"
-msgstr "同步"
+msgstr "垂直同步"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Use V-Sync"
-msgstr "使用吸附"
+msgstr "使用垂直同步"
 
 #: main/main.cpp
 msgid "Per Pixel Transparency"
-msgstr ""
+msgstr "每像素透明度"
 
 #: main/main.cpp
 msgid "Allowed"
-msgstr ""
+msgstr "允許"
 
 #: main/main.cpp
 msgid "Intended Usage"
-msgstr ""
+msgstr "預期用途"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Framebuffer Allocation"
-msgstr "完整顯示所選"
+msgstr "影格緩衝區分配"
 
 #: main/main.cpp platform/uwp/os_uwp.cpp
-#, fuzzy
 msgid "Energy Saving"
-msgstr "保存時發生錯誤"
+msgstr "節能"
 
 #: main/main.cpp
 msgid "Threads"
-msgstr ""
+msgstr "執行緒"
 
 #: main/main.cpp servers/physics_2d/physics_2d_server_wrap_mt.h
-#, fuzzy
 msgid "Thread Model"
-msgstr "切換模式"
+msgstr "執行緒模型"
 
 #: main/main.cpp
 msgid "Thread Safe BVH"
-msgstr ""
+msgstr "執行緒安全 BVH"
 
 #: main/main.cpp
 msgid "Handheld"
-msgstr ""
+msgstr "攜帶型"
 
 #: main/main.cpp platform/javascript/export/export.cpp
 #: platform/uwp/export/export.cpp
-#, fuzzy
 msgid "Orientation"
-msgstr "線上說明文件"
+msgstr "方向"
 
 #: main/main.cpp scene/gui/scroll_container.cpp scene/gui/text_edit.cpp
 #: scene/main/scene_tree.cpp scene/register_scene_types.cpp
-#, fuzzy
 msgid "Common"
-msgstr "社群"
+msgstr "常見"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Physics FPS"
-msgstr "物理影格 %"
+msgstr "物理 FPS"
 
 #: main/main.cpp
 msgid "Force FPS"
@@ -15935,87 +15924,81 @@ msgstr "強制 FPS"
 
 #: main/main.cpp
 msgid "Enable Pause Aware Picking"
-msgstr ""
+msgstr "啟用暫停感知拾取"
 
 #: main/main.cpp scene/gui/item_list.cpp scene/gui/popup_menu.cpp
 #: scene/gui/scroll_container.cpp scene/gui/text_edit.cpp scene/gui/tree.cpp
 #: scene/main/viewport.cpp scene/register_scene_types.cpp
 msgid "GUI"
-msgstr ""
+msgstr "圖形使用者介面"
 
 #: main/main.cpp
 msgid "Drop Mouse On GUI Input Disabled"
-msgstr ""
+msgstr "停用 GUI 輸入時釋放滑鼠鍵"
 
 #: main/main.cpp
 msgid "stdout"
-msgstr ""
+msgstr "標準輸出"
 
 #: main/main.cpp
 msgid "Print FPS"
-msgstr ""
+msgstr "列印 FPS"
 
 #: main/main.cpp
 msgid "Verbose stdout"
-msgstr ""
+msgstr "詳細標準輸出"
 
 #: main/main.cpp scene/main/scene_tree.cpp scene/resources/multimesh.cpp
-#, fuzzy
 msgid "Physics Interpolation"
-msgstr "插值模式"
+msgstr "物理插值"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Enable Warnings"
-msgstr "啟用條件篩選"
+msgstr "啟用警告"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Frame Delay Msec"
-msgstr "完整顯示所選"
+msgstr "影格延遲毫秒"
 
 #: main/main.cpp
 msgid "Low Processor Mode"
-msgstr ""
+msgstr "低處理器模式"
 
 #: main/main.cpp
 msgid "Delta Sync After Draw"
-msgstr ""
+msgstr "繪製後的差量同步"
 
 #: main/main.cpp
 msgid "iOS"
-msgstr ""
+msgstr "iOS"
 
 #: main/main.cpp
 msgid "Hide Home Indicator"
-msgstr ""
+msgstr "隱藏 Home 橫條"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Input Devices"
-msgstr "所有裝置"
+msgstr "輸入裝置"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Pointing"
-msgstr "點"
+msgstr "指點"
 
 #: main/main.cpp
 msgid "Touch Delay"
-msgstr ""
+msgstr "觸控延遲"
 
 #: main/main.cpp servers/visual_server.cpp
 msgid "GLES3"
-msgstr ""
+msgstr "GLES3"
 
 #: main/main.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "Shaders"
 msgstr "著色器"
 
 #: main/main.cpp
 msgid "Debug Shader Fallbacks"
-msgstr ""
+msgstr "偵錯著色器後備"
 
 #: main/main.cpp scene/3d/baked_lightmap.cpp scene/3d/camera.cpp
 #: scene/3d/world_environment.cpp scene/main/scene_tree.cpp
@@ -16025,86 +16008,79 @@ msgstr "環境"
 
 #: main/main.cpp
 msgid "Default Clear Color"
-msgstr ""
+msgstr "預設清除顏色"
 
 #: main/main.cpp
 msgid "Boot Splash"
-msgstr ""
+msgstr "啟動畫面"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Show Image"
-msgstr "顯示骨骼"
+msgstr "顯示圖像"
 
 #: main/main.cpp
 msgid "Image"
-msgstr ""
+msgstr "圖像"
 
 #: main/main.cpp
 msgid "Fullsize"
-msgstr ""
+msgstr "全尺寸"
 
 #: main/main.cpp scene/resources/dynamic_font.cpp
 msgid "Use Filter"
 msgstr "使用篩選器"
 
 #: main/main.cpp scene/resources/style_box.cpp
-#, fuzzy
 msgid "BG Color"
-msgstr "顏色"
+msgstr "背景顏色"
 
 #: main/main.cpp
-#, fuzzy
 msgid "macOS Native Icon"
-msgstr "設定圖塊圖示"
+msgstr "macOS 原生圖標"
 
 #: main/main.cpp
 msgid "Windows Native Icon"
-msgstr ""
+msgstr "Windows 原生圖標"
 
 #: main/main.cpp
 msgid "Buffering"
-msgstr ""
+msgstr "緩衝"
 
 #: main/main.cpp
 msgid "Agile Event Flushing"
-msgstr ""
+msgstr "敏捷事件刷新"
 
 #: main/main.cpp
 msgid "Emulate Touch From Mouse"
-msgstr ""
+msgstr "以滑鼠模擬觸控"
 
 #: main/main.cpp
 msgid "Emulate Mouse From Touch"
-msgstr ""
+msgstr "以觸控模擬滑鼠"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Mouse Cursor"
-msgstr "滑鼠按鈕"
+msgstr "滑鼠游標"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Custom Image"
-msgstr "剪下節點"
+msgstr "自定義圖像"
 
 #: main/main.cpp
 msgid "Custom Image Hotspot"
-msgstr ""
+msgstr "自定義圖像熱點"
 
 #: main/main.cpp
 msgid "Tooltip Position Offset"
 msgstr "工具提示位置偏移"
 
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
-#, fuzzy
 msgid "Debugger Agent"
-msgstr "除錯工具"
+msgstr "除錯工具代理"
 
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
-#, fuzzy
 msgid "Wait For Debugger"
-msgstr "除錯工具"
+msgstr "等待除錯工具"
 
 #: main/main.cpp modules/mono/mono_gd/gd_mono.cpp
 msgid "Wait Timeout"
@@ -16112,60 +16088,58 @@ msgstr "等待逾時"
 
 #: main/main.cpp
 msgid "Runtime"
-msgstr ""
+msgstr "執行階段"
 
 #: main/main.cpp
 msgid "Unhandled Exception Policy"
-msgstr ""
+msgstr "未處理的例外方針"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Main Loop Type"
-msgstr "尋找節點型別"
+msgstr "主迴圈類型"
 
 #: main/main.cpp scene/gui/texture_progress.cpp
 #: scene/gui/viewport_container.cpp
 msgid "Stretch"
-msgstr ""
+msgstr "伸縮"
 
 #: main/main.cpp
-#, fuzzy
 msgid "Aspect"
-msgstr "屬性面板"
+msgstr "方位"
 
 #: main/main.cpp
 msgid "Shrink"
-msgstr ""
+msgstr "收縮"
 
 #: main/main.cpp scene/main/scene_tree.cpp
 msgid "Auto Accept Quit"
-msgstr ""
+msgstr "自動接受退出"
 
 #: main/main.cpp scene/main/scene_tree.cpp
-#, fuzzy
 msgid "Quit On Go Back"
-msgstr "上一頁"
+msgstr "返回時退出"
 
 #: main/main.cpp scene/main/viewport.cpp
 #, fuzzy
 msgid "Snap Controls To Pixels"
-msgstr "吸附至節點側邊"
+msgstr "吸附控制至像素"
 
 #: main/main.cpp
 msgid "Dynamic Fonts"
-msgstr ""
+msgstr "動態字體"
 
 #: main/main.cpp
 msgid "Use Oversampling"
-msgstr ""
+msgstr "使用過取樣"
 
 #: modules/bullet/register_types.cpp modules/bullet/space_bullet.cpp
+#, fuzzy
 msgid "Active Soft World"
-msgstr ""
+msgstr "當前軟世界"
 
 #: modules/csg/csg_gizmos.cpp
 msgid "CSG"
-msgstr ""
+msgstr "CSG"
 
 #: modules/csg/csg_gizmos.cpp
 msgid "Change Cylinder Radius"
@@ -16184,35 +16158,30 @@ msgid "Change Torus Outer Radius"
 msgstr "更改環面外半徑"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Operation"
-msgstr "選項"
+msgstr "操作"
 
 #: modules/csg/csg_shape.cpp
 msgid "Calculate Tangents"
-msgstr ""
+msgstr "計算切線"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Use Collision"
-msgstr "碰撞"
+msgstr "使用碰撞"
 
 #: modules/csg/csg_shape.cpp servers/physics_2d_server.cpp
-#, fuzzy
 msgid "Collision Layer"
-msgstr "碰撞模式"
+msgstr "碰撞層"
 
 #: modules/csg/csg_shape.cpp scene/2d/ray_cast_2d.cpp scene/3d/camera.cpp
 #: scene/3d/ray_cast.cpp scene/3d/spring_arm.cpp
 #: scene/resources/navigation_mesh.cpp servers/physics_server.cpp
-#, fuzzy
 msgid "Collision Mask"
-msgstr "碰撞模式"
+msgstr "碰撞遮罩"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Invert Faces"
-msgstr "轉換大小寫"
+msgstr "反轉表面"
 
 #: modules/csg/csg_shape.cpp scene/2d/navigation_agent_2d.cpp
 #: scene/2d/navigation_obstacle_2d.cpp scene/3d/navigation_agent.cpp
@@ -16230,84 +16199,74 @@ msgid "Radial Segments"
 msgstr "徑向段數"
 
 #: modules/csg/csg_shape.cpp scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Rings"
-msgstr "警告"
+msgstr "環數"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Smooth Faces"
-msgstr "平滑插值"
+msgstr "光滑表面"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Sides"
-msgstr "顯示參考線"
+msgstr "邊數"
 
 #: modules/csg/csg_shape.cpp
 msgid "Cone"
-msgstr ""
+msgstr "錐體"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Inner Radius"
-msgstr "更改環面內半徑"
+msgstr "內半徑"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Outer Radius"
-msgstr "更改環面外半徑"
+msgstr "外半徑"
 
 #: modules/csg/csg_shape.cpp
 msgid "Ring Sides"
-msgstr ""
+msgstr "環邊數"
 
 #: modules/csg/csg_shape.cpp scene/2d/collision_polygon_2d.cpp
 #: scene/2d/light_occluder_2d.cpp scene/2d/polygon_2d.cpp
 #: scene/3d/collision_polygon.cpp
-#, fuzzy
 msgid "Polygon"
 msgstr "多邊形"
 
 #: modules/csg/csg_shape.cpp
 msgid "Spin Degrees"
-msgstr ""
+msgstr "旋轉度數"
 
 #: modules/csg/csg_shape.cpp
 msgid "Spin Sides"
-msgstr ""
+msgstr "旋轉邊數"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Path Node"
-msgstr "貼上節點"
+msgstr "路徑節點"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Path Interval Type"
-msgstr "建立內部頂點"
+msgstr "路徑間隔類型"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path Interval"
-msgstr ""
+msgstr "路徑間隔"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path Simplify Angle"
-msgstr ""
+msgstr "路徑簡化角度"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path Rotation"
 msgstr "路徑旋轉"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Path Local"
-msgstr "轉為本地"
+msgstr "路徑本地"
 
 #: modules/csg/csg_shape.cpp
-#, fuzzy
 msgid "Path Continuous U"
-msgstr "連續"
+msgstr "路徑連續 U"
 
 #: modules/csg/csg_shape.cpp
 msgid "Path U Distance"
@@ -16318,73 +16277,65 @@ msgid "Path Joined"
 msgstr "路徑接合"
 
 #: modules/enet/networked_multiplayer_enet.cpp
-#, fuzzy
 msgid "Compression Mode"
-msgstr "碰撞模式"
+msgstr "壓縮模式"
 
 #: modules/enet/networked_multiplayer_enet.cpp
-#, fuzzy
 msgid "Transfer Channel"
-msgstr "修改變換"
+msgstr "傳輸通道"
 
 #: modules/enet/networked_multiplayer_enet.cpp
-#, fuzzy
 msgid "Channel Count"
-msgstr "實體"
+msgstr "通道數"
 
 #: modules/enet/networked_multiplayer_enet.cpp
-#, fuzzy
 msgid "Always Ordered"
-msgstr "永遠顯示網格"
+msgstr "永遠排序"
 
 #: modules/enet/networked_multiplayer_enet.cpp
 msgid "Server Relay"
-msgstr ""
+msgstr "伺服器中繼"
 
 #: modules/enet/networked_multiplayer_enet.cpp
 msgid "DTLS Verify"
-msgstr ""
+msgstr "DTLS 驗證"
 
 #: modules/enet/networked_multiplayer_enet.cpp
 msgid "DTLS Hostname"
-msgstr ""
+msgstr "DTLS 主機名"
 
 #: modules/enet/networked_multiplayer_enet.cpp
-#, fuzzy
 msgid "Use DTLS"
-msgstr "使用吸附"
+msgstr "使用 DTLS"
 
 #: modules/fbx/editor_scene_importer_fbx.cpp
 msgid "FBX"
-msgstr ""
+msgstr "FBX"
 
 #: modules/fbx/editor_scene_importer_fbx.cpp
 msgid "Use FBX"
-msgstr ""
+msgstr "使用 FBX"
 
 #: modules/gdnative/gdnative.cpp
 msgid "Config File"
 msgstr "組態檔案"
 
 #: modules/gdnative/gdnative.cpp
-#, fuzzy
 msgid "Load Once"
-msgstr "載入資源"
+msgstr "載入一次"
 
 #: modules/gdnative/gdnative.cpp
 #: modules/visual_script/visual_script_func_nodes.cpp
-#, fuzzy
 msgid "Singleton"
-msgstr "骨架"
+msgstr "單例"
 
 #: modules/gdnative/gdnative.cpp
 msgid "Symbol Prefix"
 msgstr "符號前綴"
 
 #: modules/gdnative/gdnative.cpp
-#, fuzzy
 msgid "Reloadable"
-msgstr "重新載入"
+msgstr "可重新載入"
 
 #: modules/gdnative/gdnative.cpp
 #: modules/gdnative/gdnative_library_singleton_editor.cpp
@@ -16449,9 +16400,8 @@ msgid "Script Class"
 msgstr "腳本類別"
 
 #: modules/gdnative/nativescript/nativescript.cpp
-#, fuzzy
 msgid "Icon Path"
-msgstr "聚焦路徑"
+msgstr "圖示路徑"
 
 #: modules/gdnative/register_types.cpp
 msgid "GDNative"
@@ -16459,34 +16409,33 @@ msgstr "GDNative"
 
 #: modules/gdscript/editor/gdscript_highlighter.cpp
 #: modules/gdscript/gdscript.cpp
-#, fuzzy
 msgid "GDScript"
-msgstr "腳本"
+msgstr "GDScript"
 
 #: modules/gdscript/editor/gdscript_highlighter.cpp
+#, fuzzy
 msgid "Function Definition Color"
-msgstr ""
+msgstr "函數定義顏色"
 
 #: modules/gdscript/editor/gdscript_highlighter.cpp
-#, fuzzy
 msgid "Node Path Color"
-msgstr "複製節點路徑"
+msgstr "節點路徑顏色"
 
 #: modules/gdscript/gdscript.cpp modules/visual_script/visual_script.cpp
 msgid "Max Call Stack"
-msgstr ""
+msgstr "最大呼叫堆疊"
 
 #: modules/gdscript/gdscript.cpp
 msgid "Treat Warnings As Errors"
-msgstr ""
+msgstr "將警告視為錯誤"
 
 #: modules/gdscript/gdscript.cpp
 msgid "Exclude Addons"
-msgstr ""
+msgstr "排除外掛程式"
 
 #: modules/gdscript/gdscript.cpp
 msgid "Autocomplete Setters And Getters"
-msgstr ""
+msgstr "自動完成 Setters 和 Getters"
 
 #: modules/gdscript/gdscript_functions.cpp
 msgid "Step argument is zero!"
@@ -16529,17 +16478,16 @@ msgid "Language Server"
 msgstr "語言伺服器"
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
-#, fuzzy
 msgid "Enable Smart Resolve"
-msgstr "無法解析"
+msgstr "啟用智慧解析"
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
 msgid "Show Native Symbols In Editor"
-msgstr ""
+msgstr "在編輯器中顯示原生符號"
 
 #: modules/gdscript/language_server/gdscript_language_server.cpp
 msgid "Use Thread"
-msgstr ""
+msgstr "使用執行緒"
 
 #: modules/gltf/editor_scene_exporter_gltf_plugin.cpp
 msgid "Export Mesh GLTF2"
@@ -16550,50 +16498,44 @@ msgid "Export GLTF..."
 msgstr "匯出GLTF..."
 
 #: modules/gltf/gltf_accessor.cpp
-#, fuzzy
 msgid "Buffer View"
-msgstr "後視圖"
+msgstr "緩衝區視圖"
 
 #: modules/gltf/gltf_accessor.cpp modules/gltf/gltf_buffer_view.cpp
 msgid "Byte Offset"
 msgstr "字節偏移"
 
 #: modules/gltf/gltf_accessor.cpp
-#, fuzzy
 msgid "Component Type"
-msgstr "元件"
+msgstr "元件類型"
 
 #: modules/gltf/gltf_accessor.cpp
-#, fuzzy
 msgid "Normalized"
-msgstr "格式"
+msgstr "標準化"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Count"
 msgstr "數量"
 
 #: modules/gltf/gltf_accessor.cpp scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Min"
-msgstr "MiB"
+msgstr "最小值"
 
 #: modules/gltf/gltf_accessor.cpp scene/resources/visual_shader_nodes.cpp
-#, fuzzy
 msgid "Max"
-msgstr "混合 (Mix)"
+msgstr "最大值"
 
 #: modules/gltf/gltf_accessor.cpp
-#, fuzzy
 msgid "Sparse Count"
-msgstr "實體"
+msgstr "稀疏數量"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Indices Buffer View"
-msgstr ""
+msgstr "稀疏索引緩衝區視圖"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Indices Byte Offset"
-msgstr ""
+msgstr "稀疏索引位元組偏移"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Indices Component Type"
@@ -16601,30 +16543,27 @@ msgstr "稀疏頂點元件型別"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Values Buffer View"
-msgstr ""
+msgstr "稀疏值緩衝區視圖"
 
 #: modules/gltf/gltf_accessor.cpp
 msgid "Sparse Values Byte Offset"
-msgstr ""
+msgstr "稀疏值位元組偏移"
 
 #: modules/gltf/gltf_buffer_view.cpp
-#, fuzzy
 msgid "Buffer"
-msgstr "後視圖"
+msgstr "緩衝區"
 
 #: modules/gltf/gltf_buffer_view.cpp
-#, fuzzy
 msgid "Byte Length"
-msgstr "預設主題"
+msgstr "位元組長度"
 
 #: modules/gltf/gltf_buffer_view.cpp
 msgid "Byte Stride"
-msgstr ""
+msgstr "位元組跨距"
 
 #: modules/gltf/gltf_buffer_view.cpp
-#, fuzzy
 msgid "Indices"
-msgstr "所有裝置"
+msgstr "索引"
 
 #: modules/gltf/gltf_camera.cpp
 msgid "FOV Size"
@@ -16632,12 +16571,11 @@ msgstr "FOV 大小"
 
 #: modules/gltf/gltf_camera.cpp
 msgid "Zfar"
-msgstr ""
+msgstr "Zfar"
 
 #: modules/gltf/gltf_camera.cpp
-#, fuzzy
 msgid "Znear"
-msgstr "線性"
+msgstr "Znear"
 
 #: modules/gltf/gltf_light.cpp scene/2d/canvas_modulate.cpp
 #: scene/2d/cpu_particles_2d.cpp scene/2d/light_2d.cpp scene/2d/polygon_2d.cpp
@@ -16647,14 +16585,13 @@ msgstr "線性"
 #: scene/resources/environment.cpp scene/resources/material.cpp
 #: scene/resources/particles_material.cpp scene/resources/sky.cpp
 #: scene/resources/style_box.cpp
-#, fuzzy
 msgid "Color"
 msgstr "顏色"
 
 #: modules/gltf/gltf_light.cpp scene/3d/reflection_probe.cpp
 #: scene/resources/environment.cpp
 msgid "Intensity"
-msgstr ""
+msgstr "強度"
 
 #: modules/gltf/gltf_light.cpp scene/2d/light_2d.cpp scene/3d/light.cpp
 #, fuzzy
@@ -16663,11 +16600,11 @@ msgstr "更改"
 
 #: modules/gltf/gltf_light.cpp
 msgid "Inner Cone Angle"
-msgstr ""
+msgstr "內圓錐角"
 
 #: modules/gltf/gltf_light.cpp
 msgid "Outer Cone Angle"
-msgstr ""
+msgstr "外圓錐角"
 
 #: modules/gltf/gltf_mesh.cpp
 #, fuzzy
@@ -16689,8 +16626,9 @@ msgid "Xform"
 msgstr "平台"
 
 #: modules/gltf/gltf_node.cpp scene/3d/mesh_instance.cpp
+#, fuzzy
 msgid "Skin"
-msgstr ""
+msgstr "皮膚"
 
 #: modules/gltf/gltf_node.cpp scene/3d/spatial.cpp
 #, fuzzy
@@ -16708,12 +16646,14 @@ msgid "Joints"
 msgstr "點"
 
 #: modules/gltf/gltf_skeleton.cpp modules/gltf/gltf_skin.cpp
+#, fuzzy
 msgid "Roots"
-msgstr ""
+msgstr "根"
 
 #: modules/gltf/gltf_skeleton.cpp modules/gltf/gltf_state.cpp
+#, fuzzy
 msgid "Unique Names"
-msgstr ""
+msgstr "獨立名稱"
 
 #: modules/gltf/gltf_skeleton.cpp
 #, fuzzy
@@ -16731,8 +16671,9 @@ msgid "Joints Original"
 msgstr "聚焦原點"
 
 #: modules/gltf/gltf_skin.cpp
+#, fuzzy
 msgid "Inverse Binds"
-msgstr ""
+msgstr "反轉綁定"
 
 #: modules/gltf/gltf_skin.cpp
 #, fuzzy
@@ -16740,40 +16681,47 @@ msgid "Non Joints"
 msgstr "移動關節"
 
 #: modules/gltf/gltf_skin.cpp
+#, fuzzy
 msgid "Joint I To Bone I"
-msgstr ""
+msgstr "關節 I 至骨骼 I"
 
 #: modules/gltf/gltf_skin.cpp
+#, fuzzy
 msgid "Joint I To Name"
-msgstr ""
+msgstr "關節 I 至名稱"
 
 #: modules/gltf/gltf_skin.cpp
+#, fuzzy
 msgid "Godot Skin"
-msgstr ""
+msgstr "Godot 外觀"
 
 #: modules/gltf/gltf_spec_gloss.cpp
+#, fuzzy
 msgid "Diffuse Img"
-msgstr ""
+msgstr "漫射圖像"
 
 #: modules/gltf/gltf_spec_gloss.cpp
+#, fuzzy
 msgid "Diffuse Factor"
-msgstr ""
+msgstr "漫射係數"
 
 #: modules/gltf/gltf_spec_gloss.cpp
+#, fuzzy
 msgid "Gloss Factor"
-msgstr ""
+msgstr "光澤係數"
 
 #: modules/gltf/gltf_spec_gloss.cpp
 msgid "Specular Factor"
 msgstr "鏡面反射係數"
 
 #: modules/gltf/gltf_spec_gloss.cpp
+#, fuzzy
 msgid "Spec Gloss Img"
-msgstr ""
+msgstr "規格光澤圖像"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Json"
-msgstr ""
+msgstr "Json"
 
 #: modules/gltf/gltf_state.cpp
 #, fuzzy
@@ -16791,8 +16739,9 @@ msgid "GLB Data"
 msgstr "包含數據"
 
 #: modules/gltf/gltf_state.cpp
+#, fuzzy
 msgid "Use Named Skin Binds"
-msgstr ""
+msgstr "使用已命名的外觀綁定"
 
 #: modules/gltf/gltf_state.cpp
 #, fuzzy
@@ -16801,7 +16750,7 @@ msgstr "後視圖"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Accessors"
-msgstr ""
+msgstr "存取器"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Scene Name"
@@ -16820,11 +16769,11 @@ msgstr "功能"
 
 #: modules/gltf/gltf_state.cpp platform/uwp/export/export.cpp
 msgid "Images"
-msgstr ""
+msgstr "圖像"
 
 #: modules/gltf/gltf_state.cpp
 msgid "Cameras"
-msgstr ""
+msgstr "攝影機"
 
 #: modules/gltf/gltf_state.cpp servers/visual_server.cpp
 #, fuzzy
@@ -16869,8 +16818,9 @@ msgid "Use In Baked Light"
 msgstr "烘焙光照圖"
 
 #: modules/gridmap/grid_map.cpp scene/2d/tile_map.cpp
+#, fuzzy
 msgid "Cell"
-msgstr ""
+msgstr "單位格"
 
 #: modules/gridmap/grid_map.cpp
 #, fuzzy
@@ -16896,7 +16846,7 @@ msgstr "中央"
 #: scene/2d/tile_map.cpp scene/3d/collision_object.cpp scene/3d/soft_body.cpp
 #: scene/resources/material.cpp
 msgid "Mask"
-msgstr ""
+msgstr "遮罩"
 
 #: modules/gridmap/grid_map.cpp scene/2d/tile_map.cpp
 #, fuzzy
@@ -17074,19 +17024,19 @@ msgstr "烘焙光照圖"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Low Quality Ray Count"
-msgstr ""
+msgstr "低品質射線數"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Medium Quality Ray Count"
-msgstr ""
+msgstr "中等品質射線數"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "High Quality Ray Count"
-msgstr ""
+msgstr "高品質射線數"
 
 #: modules/lightmapper_cpu/register_types.cpp
 msgid "Ultra Quality Ray Count"
-msgstr ""
+msgstr "超高品量射線數"
 
 #: modules/minimp3/audio_stream_mp3.cpp
 #: modules/minimp3/resource_importer_mp3.cpp
@@ -17096,12 +17046,13 @@ msgid "Loop Offset"
 msgstr "循環偏移"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
+#, fuzzy
 msgid "Eye Height"
-msgstr ""
+msgstr "眼睛高度"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "IOD"
-msgstr ""
+msgstr "IOD"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 #, fuzzy
@@ -17115,15 +17066,15 @@ msgstr "顯示無陰影"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "Oversample"
-msgstr ""
+msgstr "過取樣"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "K1"
-msgstr ""
+msgstr "K1"
 
 #: modules/mobile_vr/mobile_vr_interface.cpp
 msgid "K2"
-msgstr ""
+msgstr "K2"
 
 #: modules/mono/csharp_script.cpp
 msgid "Class name can't be a reserved keyword"
@@ -17138,6 +17089,21 @@ msgstr "建構解決方案"
 msgid "Auto Update Project"
 msgstr "未命名專案"
 
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Assembly Name"
+msgstr "全部顯示"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "Solution Directory"
+msgstr "選擇資料夾"
+
+#: modules/mono/godotsharp_dirs.cpp
+#, fuzzy
+msgid "C# Project Directory"
+msgstr "選擇資料夾"
+
 #: modules/mono/mono_gd/gd_mono_utils.cpp
 msgid "End of inner exception stack trace"
 msgstr "內部異常堆疊回溯結束"
@@ -17209,19 +17175,21 @@ msgstr "完成！"
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "Seamless"
-msgstr ""
+msgstr "無縫"
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "As Normal Map"
 msgstr "作為法線貼圖"
 
 #: modules/opensimplex/noise_texture.cpp
+#, fuzzy
 msgid "Bump Strength"
-msgstr ""
+msgstr "凹凸強度"
 
 #: modules/opensimplex/noise_texture.cpp
+#, fuzzy
 msgid "Noise"
-msgstr ""
+msgstr "噪音"
 
 #: modules/opensimplex/noise_texture.cpp
 msgid "Noise Offset"
@@ -17229,11 +17197,11 @@ msgstr "噪聲偏移"
 
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Octaves"
-msgstr ""
+msgstr "八度"
 
 #: modules/opensimplex/open_simplex_noise.cpp
 msgid "Period"
-msgstr ""
+msgstr "週期"
 
 #: modules/opensimplex/open_simplex_noise.cpp
 #, fuzzy
@@ -17241,12 +17209,13 @@ msgid "Persistence"
 msgstr "透視"
 
 #: modules/opensimplex/open_simplex_noise.cpp
+#, fuzzy
 msgid "Lacunarity"
-msgstr ""
+msgstr "空隙性"
 
 #: modules/regex/regex.cpp
 msgid "Subject"
-msgstr ""
+msgstr "對象"
 
 #: modules/regex/regex.cpp
 #, fuzzy
@@ -17258,16 +17227,18 @@ msgid "Strings"
 msgstr "字串"
 
 #: modules/upnp/upnp.cpp
+#, fuzzy
 msgid "Discover Multicast If"
-msgstr ""
+msgstr "發現多播介面"
 
 #: modules/upnp/upnp.cpp
+#, fuzzy
 msgid "Discover Local Port"
-msgstr ""
+msgstr "發現本地通訊埠"
 
 #: modules/upnp/upnp.cpp
 msgid "Discover IPv6"
-msgstr ""
+msgstr "DiscoverIPv6"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
@@ -17281,7 +17252,7 @@ msgstr "設定變數型別"
 
 #: modules/upnp/upnp_device.cpp
 msgid "IGD Control URL"
-msgstr ""
+msgstr "IGD 控制 URL"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
@@ -17290,7 +17261,7 @@ msgstr "設定變數型別"
 
 #: modules/upnp/upnp_device.cpp
 msgid "IGD Our Addr"
-msgstr ""
+msgstr "IGD 我方位址"
 
 #: modules/upnp/upnp_device.cpp
 #, fuzzy
@@ -17653,7 +17624,7 @@ msgstr "設定表示式"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Return"
-msgstr ""
+msgstr "返回"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 #, fuzzy
@@ -17672,24 +17643,27 @@ msgid "Condition"
 msgstr "動畫"
 
 #: modules/visual_script/visual_script_flow_control.cpp
+#, fuzzy
 msgid "if (cond) is:"
-msgstr ""
+msgstr "如果（cond）是："
 
 #: modules/visual_script/visual_script_flow_control.cpp
+#, fuzzy
 msgid "While"
-msgstr ""
+msgstr "當"
 
 #: modules/visual_script/visual_script_flow_control.cpp
+#, fuzzy
 msgid "while (cond):"
-msgstr ""
+msgstr "當（cond）："
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Iterator"
-msgstr ""
+msgstr "迭代器"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "for (elem) in (input):"
-msgstr ""
+msgstr "對每個 (elem) 在 (input) 之中:"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Input type not iterable:"
@@ -17705,7 +17679,7 @@ msgstr "迭代器無效："
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Sequence"
-msgstr ""
+msgstr "序列"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 #, fuzzy
@@ -17723,7 +17697,7 @@ msgstr "切換"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "'input' is:"
-msgstr ""
+msgstr "'input' 是："
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Type Cast"
@@ -17731,7 +17705,7 @@ msgstr "型別轉換"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 msgid "Is %s?"
-msgstr ""
+msgstr "是 %s？"
 
 #: modules/visual_script/visual_script_flow_control.cpp
 #: modules/visual_script/visual_script_func_nodes.cpp
@@ -17741,7 +17715,7 @@ msgstr "新增腳本"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "On %s"
-msgstr ""
+msgstr "在 %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
@@ -17788,11 +17762,11 @@ msgstr "位於字元 %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "Multiply %s"
-msgstr ""
+msgstr "%s 乘以"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "Divide %s"
-msgstr ""
+msgstr "%s 除以"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
@@ -17806,7 +17780,7 @@ msgstr "設定 %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 msgid "ShiftRight %s"
-msgstr ""
+msgstr "將 %s 向右移動"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
@@ -17814,12 +17788,14 @@ msgid "BitAnd %s"
 msgstr "新增 %"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
+#, fuzzy
 msgid "BitOr %s"
-msgstr ""
+msgstr "位元運算 OR %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
+#, fuzzy
 msgid "BitXor %s"
-msgstr ""
+msgstr "位元預算 XOR %s"
 
 #: modules/visual_script/visual_script_func_nodes.cpp
 #, fuzzy
@@ -17879,7 +17855,7 @@ msgstr "無效的引數:"
 
 #: modules/visual_script/visual_script_nodes.cpp
 msgid "a if cond, else b"
-msgstr ""
+msgstr "如果 cond 則 a ，否則 b"
 
 #: modules/visual_script/visual_script_nodes.cpp
 #, fuzzy
@@ -17971,7 +17947,7 @@ msgstr "呼叫"
 
 #: modules/visual_script/visual_script_nodes.cpp scene/gui/graph_node.cpp
 msgid "Title"
-msgstr ""
+msgstr "標題"
 
 #: modules/visual_script/visual_script_nodes.cpp
 #, fuzzy
@@ -17995,7 +17971,7 @@ msgstr "操作"
 
 #: modules/visual_script/visual_script_nodes.cpp
 msgid "Deconstruct %s"
-msgstr ""
+msgstr "解構 %s"
 
 #: modules/visual_script/visual_script_property_selector.cpp
 msgid "Search VisualScript"
@@ -18021,7 +17997,7 @@ msgstr "物理影格 %"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp
 msgid "%s sec(s)"
-msgstr ""
+msgstr "%s 秒"
 
 #: modules/visual_script/visual_script_yield_nodes.cpp scene/main/timer.cpp
 #, fuzzy
@@ -18050,7 +18026,7 @@ msgstr "優先模式"
 
 #: modules/webrtc/webrtc_data_channel.h
 msgid "WebRTC"
-msgstr ""
+msgstr "WebRTC"
 
 #: modules/webrtc/webrtc_data_channel.h
 #, fuzzy
@@ -18059,11 +18035,11 @@ msgstr "畫布多邊形索引緩衝區大小（KB）"
 
 #: modules/websocket/websocket_client.cpp
 msgid "Verify SSL"
-msgstr ""
+msgstr "驗證 SSL"
 
 #: modules/websocket/websocket_client.cpp
 msgid "Trusted SSL Certificate"
-msgstr ""
+msgstr "受信任的 SSL 憑證"
 
 #: modules/websocket/websocket_macros.h
 #, fuzzy
@@ -18077,7 +18053,7 @@ msgstr "最大大小（KB）"
 
 #: modules/websocket/websocket_macros.h
 msgid "Max In Packets"
-msgstr ""
+msgstr "封包上限"
 
 #: modules/websocket/websocket_macros.h
 #, fuzzy
@@ -18086,7 +18062,7 @@ msgstr "最大大小（KB）"
 
 #: modules/websocket/websocket_macros.h
 msgid "Max Out Packets"
-msgstr ""
+msgstr "輸出封包上限"
 
 #: modules/websocket/websocket_macros.h
 #, fuzzy
@@ -18095,7 +18071,7 @@ msgstr "網路分析工具"
 
 #: modules/websocket/websocket_server.cpp
 msgid "Bind IP"
-msgstr ""
+msgstr "綁定 IP"
 
 #: modules/websocket/websocket_server.cpp
 #, fuzzy
@@ -18104,7 +18080,7 @@ msgstr "實體按鍵"
 
 #: modules/websocket/websocket_server.cpp platform/javascript/export/export.cpp
 msgid "SSL Certificate"
-msgstr ""
+msgstr "SSL 憑證"
 
 #: modules/websocket/websocket_server.cpp
 #, fuzzy
@@ -18130,11 +18106,11 @@ msgstr "可選特性"
 
 #: modules/webxr/webxr_interface.cpp
 msgid "Requested Reference Space Types"
-msgstr ""
+msgstr "被請求的參照空間類型"
 
 #: modules/webxr/webxr_interface.cpp
 msgid "Reference Space Type"
-msgstr ""
+msgstr "參照空間類型"
 
 #: modules/webxr/webxr_interface.cpp
 #, fuzzy
@@ -18153,7 +18129,7 @@ msgstr "智慧型吸附"
 
 #: platform/android/export/export.cpp
 msgid "Android SDK Path"
-msgstr ""
+msgstr "Android SDK 路徑"
 
 #: platform/android/export/export.cpp
 #, fuzzy
@@ -18162,31 +18138,31 @@ msgstr "除錯工具"
 
 #: platform/android/export/export.cpp
 msgid "Debug Keystore User"
-msgstr ""
+msgstr "偵錯金鑰儲存區使用者"
 
 #: platform/android/export/export.cpp
 msgid "Debug Keystore Pass"
-msgstr ""
+msgstr "金鑰儲存區偵錯密碼"
 
 #: platform/android/export/export.cpp
 msgid "Force System User"
-msgstr ""
+msgstr "強制系統使用者"
 
 #: platform/android/export/export.cpp
 msgid "Shutdown ADB On Exit"
-msgstr ""
+msgstr "退出時關閉 ADB"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Launcher Icons"
-msgstr ""
+msgstr "啟動器圖示"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Main 192 X 192"
-msgstr ""
+msgstr "主圖示 192 X 192"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Adaptive Foreground 432 X 432"
-msgstr ""
+msgstr "自適應前景 432 X 432"
 
 #: platform/android/export/export_plugin.cpp
 msgid "Adaptive Background 432 X 432"
@@ -18948,6 +18924,11 @@ msgstr "剪下節點"
 msgid "Custom BG Color"
 msgstr "剪下節點"
 
+#: platform/iphone/export/export.cpp
+#, fuzzy
+msgid "Export Icons"
+msgstr "展開全部"
+
 #: platform/iphone/export/export.cpp platform/javascript/export/export.cpp
 #: platform/osx/export/export.cpp
 #, fuzzy
@@ -19781,6 +19762,12 @@ msgid "Show Name On Square 310 X 310"
 msgstr ""
 
 #: platform/uwp/export/export.cpp
+msgid ""
+"Godot's Mono version does not support the UWP platform. Use the standard "
+"build (no C# support) if you wish to target UWP."
+msgstr ""
+
+#: platform/uwp/export/export.cpp
 msgid "Invalid package short name."
 msgstr "無效的套件段名稱。"
 
@@ -23275,43 +23262,36 @@ msgid "Mix Mode"
 msgstr "Mix 節點"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Fadein Time"
-msgstr "淡入與淡出時間（秒）："
+msgstr "淡入時間"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Fadeout Time"
-msgstr "淡入與淡出時間（秒）："
+msgstr "淡出時間"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Auto Restart"
-msgstr "自動重新開始："
+msgstr "自動重新開始"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Autorestart"
-msgstr "自動重新開始："
+msgstr "自動重新開始"
 
 #: scene/animation/animation_blend_tree.cpp
 msgid "Delay"
 msgstr ""
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Random Delay"
-msgstr "隨機傾斜："
+msgstr "隨機延遲"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Add Amount"
-msgstr "數量："
+msgstr "增加數量"
 
 #: scene/animation/animation_blend_tree.cpp
-#, fuzzy
 msgid "Blend Amount"
-msgstr "數量："
+msgstr "混合量"
 
 #: scene/animation/animation_blend_tree.cpp
 #, fuzzy
@@ -23325,14 +23305,12 @@ msgstr "新增輸入埠口"
 
 #: scene/animation/animation_blend_tree.cpp
 #: scene/animation/animation_node_state_machine.cpp
-#, fuzzy
 msgid "Xfade Time"
-msgstr "淡入與淡出時間（秒）："
+msgstr "Xfade 時間"
 
 #: scene/animation/animation_node_state_machine.cpp
-#, fuzzy
 msgid "Switch Mode"
-msgstr "仰角："
+msgstr "切換模式"
 
 #: scene/animation/animation_node_state_machine.cpp
 #, fuzzy
@@ -23373,9 +23351,8 @@ msgid "Current Animation Position"
 msgstr "新增動畫頂點"
 
 #: scene/animation/animation_player.cpp
-#, fuzzy
 msgid "Playback Options"
-msgstr "類別選項："
+msgstr "播放選項"
 
 #: scene/animation/animation_player.cpp
 #, fuzzy
@@ -23415,9 +23392,8 @@ msgid "The AnimationPlayer root node is not a valid node."
 msgstr "AnimationPlayer 的根節點並非有效節點。"
 
 #: scene/animation/animation_tree.cpp
-#, fuzzy
 msgid "Tree Root"
-msgstr "建立根節點："
+msgstr "樹根節點"
 
 #: scene/animation/animation_tree.cpp
 #, fuzzy
@@ -23673,14 +23649,12 @@ msgid "Grow Direction"
 msgstr "方向"
 
 #: scene/gui/control.cpp scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Min Size"
-msgstr "輪廓尺寸："
+msgstr "最小尺寸"
 
 #: scene/gui/control.cpp
-#, fuzzy
 msgid "Pivot Offset"
-msgstr "網格偏移量："
+msgstr "樞紐偏移量"
 
 #: scene/gui/control.cpp
 #, fuzzy
@@ -23740,7 +23714,7 @@ msgstr ""
 
 #: scene/gui/control.cpp
 msgid "Size Flags"
-msgstr "大小 Flag："
+msgstr "大小 Flag"
 
 #: scene/gui/control.cpp
 #, fuzzy
@@ -23788,14 +23762,12 @@ msgid "Right Disconnects"
 msgstr "斷開訊號連接"
 
 #: scene/gui/graph_edit.cpp
-#, fuzzy
 msgid "Scroll Offset"
-msgstr "網格偏移量："
+msgstr "捲軸偏移量"
 
 #: scene/gui/graph_edit.cpp
-#, fuzzy
 msgid "Snap Distance"
-msgstr "選擇距離："
+msgstr "吸附距離"
 
 #: scene/gui/graph_edit.cpp
 #, fuzzy
@@ -23895,7 +23867,7 @@ msgstr ""
 #: scene/gui/item_list.cpp
 #, fuzzy
 msgid "Icon Scale"
-msgstr "隨機縮放："
+msgstr "圖示比例"
 
 #: scene/gui/item_list.cpp
 #, fuzzy
@@ -23908,9 +23880,8 @@ msgid "V Align"
 msgstr "指派"
 
 #: scene/gui/label.cpp scene/gui/rich_text_label.cpp
-#, fuzzy
 msgid "Visible Characters"
-msgstr "可使用的字元："
+msgstr "可見字符"
 
 #: scene/gui/label.cpp scene/gui/rich_text_label.cpp
 #, fuzzy
@@ -23934,9 +23905,8 @@ msgid "Secret"
 msgstr ""
 
 #: scene/gui/line_edit.cpp
-#, fuzzy
 msgid "Secret Character"
-msgstr "可使用的字元："
+msgstr "秘密字元"
 
 #: scene/gui/line_edit.cpp
 msgid "Expand To Text Length"
@@ -24000,18 +23970,16 @@ msgid "Blink"
 msgstr ""
 
 #: scene/gui/line_edit.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Blink Speed"
-msgstr "速度："
+msgstr "閃爍速度"
 
 #: scene/gui/link_button.cpp
 msgid "Underline"
 msgstr ""
 
 #: scene/gui/menu_button.cpp
-#, fuzzy
 msgid "Switch On Hover"
-msgstr "仰角："
+msgstr "懸停時切換"
 
 #: scene/gui/nine_patch_rect.cpp scene/resources/style_box.cpp
 #, fuzzy
@@ -24087,9 +24055,8 @@ msgid "Allow Search"
 msgstr "搜尋"
 
 #: scene/gui/progress_bar.cpp
-#, fuzzy
 msgid "Percent"
-msgstr "最近存取："
+msgstr "百分比"
 
 #: scene/gui/range.cpp
 msgid "If \"Exp Edit\" is enabled, \"Min Value\" must be greater than 0."
@@ -24148,9 +24115,8 @@ msgid "Absolute Index"
 msgstr "自動縮排"
 
 #: scene/gui/rich_text_effect.cpp
-#, fuzzy
 msgid "Elapsed Time"
-msgstr "混合時間："
+msgstr "經過時間"
 
 #: scene/gui/rich_text_effect.cpp
 #, fuzzy
@@ -24158,9 +24124,8 @@ msgid "Env"
 msgstr "結束"
 
 #: scene/gui/rich_text_effect.cpp
-#, fuzzy
 msgid "Character"
-msgstr "可使用的字元："
+msgstr "字元"
 
 #: scene/gui/rich_text_label.cpp
 msgid "BBCode"
@@ -24171,9 +24136,8 @@ msgid "Meta Underlined"
 msgstr ""
 
 #: scene/gui/rich_text_label.cpp
-#, fuzzy
 msgid "Tab Size"
-msgstr "大小："
+msgstr "分頁大小"
 
 #: scene/gui/rich_text_label.cpp
 #, fuzzy
@@ -24194,9 +24158,8 @@ msgid "Selection Enabled"
 msgstr "僅搜尋所選區域"
 
 #: scene/gui/rich_text_label.cpp scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Override Selected Font Color"
-msgstr "設定所選之設定檔："
+msgstr "覆蓋所選字型顏色"
 
 #: scene/gui/rich_text_label.cpp
 #, fuzzy
@@ -24224,9 +24187,8 @@ msgid "Follow Focus"
 msgstr "填充表面"
 
 #: scene/gui/scroll_container.cpp
-#, fuzzy
 msgid "Horizontal Enabled"
-msgstr "水平："
+msgstr "已啟用水平"
 
 #: scene/gui/scroll_container.cpp
 #, fuzzy
@@ -24247,24 +24209,20 @@ msgid "Tick Count"
 msgstr "選擇顏色"
 
 #: scene/gui/slider.cpp
-#, fuzzy
 msgid "Ticks On Borders"
-msgstr "重新命名資料夾："
+msgstr "邊框刻度"
 
 #: scene/gui/spin_box.cpp
-#, fuzzy
 msgid "Prefix"
-msgstr "前置："
+msgstr "前綴"
 
 #: scene/gui/spin_box.cpp
-#, fuzzy
 msgid "Suffix"
-msgstr "後置："
+msgstr "後綴"
 
 #: scene/gui/split_container.cpp
-#, fuzzy
 msgid "Split Offset"
-msgstr "網格偏移量："
+msgstr "拆分偏移"
 
 #: scene/gui/split_container.cpp scene/gui/tree.cpp
 #, fuzzy
@@ -24281,9 +24239,8 @@ msgid "Tab Align"
 msgstr ""
 
 #: scene/gui/tab_container.cpp scene/gui/tabs.cpp
-#, fuzzy
 msgid "Current Tab"
-msgstr "目前："
+msgstr "當前分頁"
 
 #: scene/gui/tab_container.cpp
 #, fuzzy
@@ -24327,7 +24284,7 @@ msgstr "跳過中斷點"
 #: scene/gui/text_edit.cpp
 #, fuzzy
 msgid "Fold Gutter"
-msgstr "資料夾："
+msgstr "摺疊格線"
 
 #: scene/gui/text_edit.cpp
 #, fuzzy
@@ -24345,19 +24302,16 @@ msgid "Wrap Enabled"
 msgstr "啟用"
 
 #: scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Scroll Vertical"
-msgstr "垂直："
+msgstr "垂直滾動"
 
 #: scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Scroll Horizontal"
-msgstr "水平："
+msgstr "水平滾動"
 
 #: scene/gui/text_edit.cpp
-#, fuzzy
 msgid "Draw"
-msgstr "繪製呼叫："
+msgstr "繪製"
 
 #: scene/gui/text_edit.cpp
 #, fuzzy
@@ -24415,9 +24369,8 @@ msgid "Progress Offset"
 msgstr ""
 
 #: scene/gui/texture_progress.cpp
-#, fuzzy
 msgid "Fill Mode"
-msgstr "播放模式："
+msgstr "填充模式"
 
 #: scene/gui/texture_progress.cpp scene/resources/material.cpp
 msgid "Tint"
@@ -24485,9 +24438,8 @@ msgid "Hide Folding"
 msgstr "已停用的按鈕"
 
 #: scene/gui/tree.cpp
-#, fuzzy
 msgid "Hide Root"
-msgstr "建立根節點："
+msgstr "隱藏根節點"
 
 #: scene/gui/tree.cpp
 msgid "Drop Mode Flags"
@@ -24585,19 +24537,16 @@ msgid "Filename"
 msgstr "重新命名"
 
 #: scene/main/node.cpp
-#, fuzzy
 msgid "Owner"
-msgstr "為下列之擁有者："
+msgstr "擁有者"
 
 #: scene/main/node.cpp scene/main/scene_tree.cpp
-#, fuzzy
 msgid "Multiplayer"
-msgstr "設定多個："
+msgstr "多人"
 
 #: scene/main/node.cpp
-#, fuzzy
 msgid "Custom Multiplayer"
-msgstr "設定多個："
+msgstr "自定義多人"
 
 #: scene/main/node.cpp
 #, fuzzy
@@ -24635,7 +24584,7 @@ msgstr ""
 #: scene/main/scene_tree.cpp
 #, fuzzy
 msgid "Multiplayer Poll"
-msgstr "設定多個："
+msgstr "多人投票調查"
 
 #: scene/main/scene_tree.cpp scene/resources/mesh_library.cpp
 #: scene/resources/shape_2d.cpp
@@ -24676,7 +24625,7 @@ msgstr "反射"
 #: scene/main/scene_tree.cpp
 #, fuzzy
 msgid "Atlas Size"
-msgstr "輪廓尺寸："
+msgstr "地圖集大小"
 
 #: scene/main/scene_tree.cpp
 msgid "Atlas Subdiv"
@@ -24732,9 +24681,8 @@ msgstr ""
 "建議使用腳本的處理迴圈（Process Loop）而非這類計時器。"
 
 #: scene/main/timer.cpp
-#, fuzzy
 msgid "Autostart"
-msgstr "自動重新開始："
+msgstr "自動開始"
 
 #: scene/main/viewport.cpp
 #, fuzzy
@@ -24816,9 +24764,8 @@ msgid "Debug Draw"
 msgstr "偵錯"
 
 #: scene/main/viewport.cpp
-#, fuzzy
 msgid "Render Target"
-msgstr "算繪引擎："
+msgstr "算繪目標"
 
 #: scene/main/viewport.cpp
 msgid "V Flip"
@@ -24951,7 +24898,7 @@ msgstr ""
 #: scene/resources/concave_polygon_shape_2d.cpp
 #, fuzzy
 msgid "Segments"
-msgstr "主場景引數："
+msgstr "分段"
 
 #: scene/resources/curve.cpp
 #, fuzzy
@@ -24992,9 +24939,8 @@ msgid "Font Color Disabled"
 msgstr "剪裁已禁用"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "H Separation"
-msgstr "分隔："
+msgstr "水平分離"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25062,9 +25008,8 @@ msgid "On Disabled"
 msgstr "已停用的項目"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Off"
-msgstr "偏移："
+msgstr "關閉"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25082,14 +25027,12 @@ msgid "Font Outline Modulate"
 msgstr "強制使用白色調變"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Shadow Offset X"
-msgstr "網格 X 偏移："
+msgstr "陰影 X 偏移"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Shadow Offset Y"
-msgstr "網格 Y 偏移："
+msgstr "陰影 Y 偏移"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25147,14 +25090,12 @@ msgid "Space"
 msgstr "主場景"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Folded"
-msgstr "資料夾："
+msgstr "已折叠"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Fold"
-msgstr "資料夾："
+msgstr "折疊"
 
 #: scene/resources/default_theme/default_theme.cpp
 msgid "Font Color Readonly"
@@ -25273,14 +25214,12 @@ msgid "Close Highlight"
 msgstr "向性光照"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close H Offset"
-msgstr "網格偏移量："
+msgstr "關閉水平偏移"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close V Offset"
-msgstr "網格偏移量："
+msgstr "關閉垂直偏移"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25321,9 +25260,8 @@ msgid "Font Color Separator"
 msgstr "分隔線字體顏色"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "V Separation"
-msgstr "分隔："
+msgstr "垂直分隔"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25366,19 +25304,16 @@ msgid "Resizer Color"
 msgstr "顏色"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Title Offset"
-msgstr "網格偏移量："
+msgstr "標題偏移量"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Close Offset"
-msgstr "網格偏移量："
+msgstr "關閉偏移"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Port Offset"
-msgstr "網格偏移量："
+msgstr "連接埠偏移量"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25489,9 +25424,8 @@ msgid "Draw Guides"
 msgstr "顯示參考線"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Scroll Border"
-msgstr "垂直："
+msgstr "捲軸邊框"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25504,9 +25438,8 @@ msgid "Icon Margin"
 msgstr "設定外邊距"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Line Separation"
-msgstr "分隔："
+msgstr "行分隔"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25566,9 +25499,8 @@ msgid "Large"
 msgstr "目標"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Folder"
-msgstr "資料夾："
+msgstr "資料夾"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25668,14 +25600,12 @@ msgid "Mono Font"
 msgstr "主場景"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Table H Separation"
-msgstr "分隔："
+msgstr "表格水平分隔"
 
 #: scene/resources/default_theme/default_theme.cpp
-#, fuzzy
 msgid "Table V Separation"
-msgstr "分隔："
+msgstr "表格垂直分隔"
 
 #: scene/resources/default_theme/default_theme.cpp
 #, fuzzy
@@ -25769,9 +25699,8 @@ msgid "Font Path"
 msgstr "聚焦路徑"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Outline Size"
-msgstr "輪廓尺寸："
+msgstr "輪廓尺寸"
 
 #: scene/resources/dynamic_font.cpp
 #, fuzzy
@@ -25784,14 +25713,12 @@ msgid "Use Mipmaps"
 msgstr "訊號"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Extra Spacing"
-msgstr "更多選項："
+msgstr "額外間距"
 
 #: scene/resources/dynamic_font.cpp
-#, fuzzy
 msgid "Char"
-msgstr "可使用的字元："
+msgstr "字元"
 
 #: scene/resources/dynamic_font.cpp
 #, fuzzy
@@ -25817,9 +25744,8 @@ msgid "Sky Orientation"
 msgstr "線上說明文件"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sky Rotation"
-msgstr "旋轉步長："
+msgstr "天空旋轉"
 
 #: scene/resources/environment.cpp
 msgid "Sky Rotation Degrees"
@@ -25848,14 +25774,12 @@ msgid "Fog"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sun Color"
-msgstr "儲存檔案："
+msgstr "太陽顏色"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Sun Amount"
-msgstr "數量："
+msgstr "太陽亮度"
 
 #: scene/resources/environment.cpp
 #, fuzzy
@@ -25944,14 +25868,12 @@ msgid "Max Steps"
 msgstr "步長"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Fade In"
-msgstr "淡入（秒）："
+msgstr "淡入"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Fade Out"
-msgstr "淡出（秒）："
+msgstr "淡出"
 
 #: scene/resources/environment.cpp
 #, fuzzy
@@ -25967,9 +25889,8 @@ msgid "SSAO"
 msgstr ""
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Radius 2"
-msgstr "半徑："
+msgstr "半徑2"
 
 #: scene/resources/environment.cpp
 msgid "Intensity 2"
@@ -25998,9 +25919,8 @@ msgid "DOF Far Blur"
 msgstr ""
 
 #: scene/resources/environment.cpp scene/resources/material.cpp
-#, fuzzy
 msgid "Distance"
-msgstr "選擇距離："
+msgstr "距離"
 
 #: scene/resources/environment.cpp
 msgid "Transition"
@@ -26082,9 +26002,8 @@ msgid "Brightness"
 msgstr "燈光"
 
 #: scene/resources/environment.cpp
-#, fuzzy
 msgid "Saturation"
-msgstr "分隔："
+msgstr "飽和度"
 
 #: scene/resources/environment.cpp
 msgid "Color Correction"
@@ -26093,7 +26012,7 @@ msgstr "顏色校正"
 #: scene/resources/font.cpp
 #, fuzzy
 msgid "Ascent"
-msgstr "最近存取："
+msgstr "上升"
 
 #: scene/resources/font.cpp
 #, fuzzy
@@ -26106,9 +26025,8 @@ msgid "Raw Data"
 msgstr "深度"
 
 #: scene/resources/gradient.cpp
-#, fuzzy
 msgid "Offsets"
-msgstr "偏移："
+msgstr "偏移"
 
 #: scene/resources/height_map_shape.cpp
 msgid "Map Width"
@@ -26191,9 +26109,8 @@ msgid "Is sRGB"
 msgstr ""
 
 #: scene/resources/material.cpp servers/visual_server.cpp
-#, fuzzy
 msgid "Parameters"
-msgstr "已更改參數："
+msgstr "參數"
 
 #: scene/resources/material.cpp
 #, fuzzy
@@ -26235,9 +26152,8 @@ msgid "Grow"
 msgstr ""
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Grow Amount"
-msgstr "數量："
+msgstr "生成量"
 
 #: scene/resources/material.cpp
 msgid "Use Alpha Scissor"
@@ -26342,9 +26258,8 @@ msgid "Transmission"
 msgstr "轉場"
 
 #: scene/resources/material.cpp
-#, fuzzy
 msgid "Refraction"
-msgstr "分隔："
+msgstr "折射"
 
 #: scene/resources/material.cpp
 msgid "Detail"
@@ -26429,7 +26344,7 @@ msgstr ""
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Sampling"
-msgstr "縮放："
+msgstr "取樣"
 
 #: scene/resources/navigation_mesh.cpp
 #, fuzzy
@@ -26456,7 +26371,7 @@ msgstr ""
 #: scene/resources/navigation_mesh.cpp
 #, fuzzy
 msgid "Agents"
-msgstr "主場景引數："
+msgstr "代理"
 
 #: scene/resources/navigation_mesh.cpp
 msgid "Max Climb"
@@ -26495,9 +26410,8 @@ msgid "Details"
 msgstr "顯示預設"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Sample Distance"
-msgstr "選擇距離："
+msgstr "採樣距離"
 
 #: scene/resources/navigation_mesh.cpp
 #, fuzzy
@@ -26522,9 +26436,8 @@ msgid "Baking AABB"
 msgstr "正在產生 AABB"
 
 #: scene/resources/navigation_mesh.cpp
-#, fuzzy
 msgid "Baking AABB Offset"
-msgstr "偏移："
+msgstr "烘焙 AABB 偏移"
 
 #: scene/resources/occluder_shape.cpp
 msgid "Spheres"
@@ -26567,9 +26480,8 @@ msgid "Color Modifier"
 msgstr "放慢自由視圖速度"
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Point Texture"
-msgstr "發射點："
+msgstr "點紋理貼圖"
 
 #: scene/resources/particles_material.cpp
 msgid "Normal Texture"
@@ -26585,9 +26497,8 @@ msgid "Point Count"
 msgstr "新增輸入埠口"
 
 #: scene/resources/particles_material.cpp
-#, fuzzy
 msgid "Scale Random"
-msgstr "縮放比例："
+msgstr "縮放隨機"
 
 #: scene/resources/particles_material.cpp
 #, fuzzy
@@ -26603,9 +26514,8 @@ msgid "Absorbent"
 msgstr ""
 
 #: scene/resources/plane_shape.cpp
-#, fuzzy
 msgid "Plane"
-msgstr "平面："
+msgstr "平面"
 
 #: scene/resources/primitive_meshes.cpp
 #, fuzzy
@@ -26629,9 +26539,8 @@ msgid "Subdivide Depth"
 msgstr ""
 
 #: scene/resources/primitive_meshes.cpp
-#, fuzzy
 msgid "Top Radius"
-msgstr "半徑："
+msgstr "頂部半徑"
 
 #: scene/resources/primitive_meshes.cpp
 #, fuzzy
@@ -26680,9 +26589,8 @@ msgid "Bone"
 msgstr "骨骼"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Radiance Size"
-msgstr "輪廓尺寸："
+msgstr "光澤大小"
 
 #: scene/resources/sky.cpp
 msgid "Panorama"
@@ -26694,9 +26602,8 @@ msgid "Top Color"
 msgstr "下一個地板"
 
 #: scene/resources/sky.cpp
-#, fuzzy
 msgid "Horizon Color"
-msgstr "儲存檔案："
+msgstr "地平線顏色"
 
 #: scene/resources/sky.cpp
 #, fuzzy
@@ -26805,9 +26712,8 @@ msgid "Lossy Storage Quality"
 msgstr "截取"
 
 #: scene/resources/texture.cpp
-#, fuzzy
 msgid "From"
-msgstr "播放模式："
+msgstr "來自"
 
 #: scene/resources/texture.cpp
 #, fuzzy
@@ -26973,9 +26879,8 @@ msgid "Default Cell Height"
 msgstr "測試"
 
 #: scene/resources/world.cpp scene/resources/world_2d.cpp
-#, fuzzy
 msgid "Default Edge Connection Margin"
-msgstr "編輯連接內容："
+msgstr "預設邊緣連接邊距"
 
 #: scene/resources/world_2d.cpp
 msgid "Canvas"
@@ -27009,9 +26914,8 @@ msgid "Audio Stream"
 msgstr "單選項"
 
 #: servers/audio/audio_stream.cpp
-#, fuzzy
 msgid "Random Pitch"
-msgstr "隨機傾斜："
+msgstr "隨機音高"
 
 #: servers/audio/effects/audio_effect_capture.cpp
 #: servers/audio/effects/audio_effect_spectrum_analyzer.cpp
@@ -27061,9 +26965,8 @@ msgstr ""
 #: servers/audio/effects/audio_effect_chorus.cpp
 #: servers/audio/effects/audio_effect_delay.cpp
 #: servers/audio/effects/audio_effect_panner.cpp
-#, fuzzy
 msgid "Pan"
-msgstr "平面："
+msgstr "平移"
 
 #: servers/audio/effects/audio_effect_compressor.cpp
 #: servers/audio/effects/audio_effect_filter.cpp
@@ -27159,9 +27062,8 @@ msgstr ""
 
 #: servers/audio/effects/audio_effect_pitch_shift.cpp
 #: servers/audio/effects/audio_effect_spectrum_analyzer.cpp
-#, fuzzy
 msgid "FFT Size"
-msgstr "大小："
+msgstr "FFT 大小"
 
 #: servers/audio/effects/audio_effect_reverb.cpp
 msgid "Predelay"
@@ -27452,7 +27354,6 @@ msgid "Filter Mode"
 msgstr "篩選節點"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Texture Array Reflections"
 msgstr "紋理貼圖陣列反射"
 
@@ -27511,22 +27412,18 @@ msgid "Use Nearest Mipmap Filter"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Skinning"
 msgstr "外觀變更"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Software Skinning Fallback"
 msgstr "軟體外觀變更後備"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Force Software Skinning"
 msgstr "強制軟體外觀變更"
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Use Software Skinning"
 msgstr "使用軟體外觀變更"
 
@@ -27587,7 +27484,6 @@ msgid "Scissor Area Threshold"
 msgstr ""
 
 #: servers/visual_server.cpp
-#, fuzzy
 msgid "Max Join Items"
 msgstr "最大加入項目數"