Small Issues & Maintenance

-=-=-=-=-=-=-=-=-=-=-=-=-=

-Begin work on Navigation Meshes (simple pathfinding for now, will improve soon)
-More doc on theme overriding
-Upgraded OpenSSL to version without bugs
-Misc bugfixes

16 files changed, 0 insertions, 4649 deletions

diff --git a/drivers/builtin_openssl/crypto/rc4/asm/rc4-586.pl b/drivers/builtin_openssl/crypto/rc4/asm/rc4-586.pl
deleted file mode 100644
index 5c9ac6ad28..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/asm/rc4-586.pl
+++ /dev/null
@@ -1,410 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# At some point it became apparent that the original SSLeay RC4
-# assembler implementation performs suboptimally on latest IA-32
-# microarchitectures. After re-tuning performance has changed as
-# following:
-#
-# Pentium	-10%
-# Pentium III	+12%
-# AMD		+50%(*)
-# P4		+250%(**)
-#
-# (*)	This number is actually a trade-off:-) It's possible to
-#	achieve	+72%, but at the cost of -48% off PIII performance.
-#	In other words code performing further 13% faster on AMD
-#	would perform almost 2 times slower on Intel PIII...
-#	For reference! This code delivers ~80% of rc4-amd64.pl
-#	performance on the same Opteron machine.
-# (**)	This number requires compressed key schedule set up by
-#	RC4_set_key [see commentary below for further details].
-#
-#					<appro@fy.chalmers.se>
-
-# May 2011
-#
-# Optimize for Core2 and Westmere [and incidentally Opteron]. Current
-# performance in cycles per processed byte (less is better) and
-# improvement relative to previous version of this module is:
-#
-# Pentium	10.2			# original numbers
-# Pentium III	7.8(*)
-# Intel P4	7.5
-#
-# Opteron	6.1/+20%		# new MMX numbers
-# Core2		5.3/+67%(**)
-# Westmere	5.1/+94%(**)
-# Sandy Bridge	5.0/+8%
-# Atom		12.6/+6%
-#
-# (*)	PIII can actually deliver 6.6 cycles per byte with MMX code,
-#	but this specific code performs poorly on Core2. And vice
-#	versa, below MMX/SSE code delivering 5.8/7.1 on Core2 performs
-#	poorly on PIII, at 8.0/14.5:-( As PIII is not a "hot" CPU
-#	[anymore], I chose to discard PIII-specific code path and opt
-#	for original IALU-only code, which is why MMX/SSE code path
-#	is guarded by SSE2 bit (see below), not MMX/SSE.
-# (**)	Performance vs. block size on Core2 and Westmere had a maximum
-#	at ... 64 bytes block size. And it was quite a maximum, 40-60%
-#	in comparison to largest 8KB block size. Above improvement
-#	coefficients are for the largest block size.
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"rc4-586.pl");
-
-$xx="eax";
-$yy="ebx";
-$tx="ecx";
-$ty="edx";
-$inp="esi";
-$out="ebp";
-$dat="edi";
-
-sub RC4_loop {
-  my $i=shift;
-  my $func = ($i==0)?*mov:*or;
-
-	&add	(&LB($yy),&LB($tx));
-	&mov	($ty,&DWP(0,$dat,$yy,4));
-	&mov	(&DWP(0,$dat,$yy,4),$tx);
-	&mov	(&DWP(0,$dat,$xx,4),$ty);
-	&add	($ty,$tx);
-	&inc	(&LB($xx));
-	&and	($ty,0xff);
-	&ror	($out,8)	if ($i!=0);
-	if ($i<3) {
-	  &mov	($tx,&DWP(0,$dat,$xx,4));
-	} else {
-	  &mov	($tx,&wparam(3));	# reload [re-biased] out
-	}
-	&$func	($out,&DWP(0,$dat,$ty,4));
-}
-
-if ($alt=0) {
-  # >20% faster on Atom and Sandy Bridge[!], 8% faster on Opteron,
-  # but ~40% slower on Core2 and Westmere... Attempt to add movz
-  # brings down Opteron by 25%, Atom and Sandy Bridge by 15%, yet
-  # on Core2 with movz it's almost 20% slower than below alternative
-  # code... Yes, it's a total mess...
-  my @XX=($xx,$out);
-  $RC4_loop_mmx = sub {		# SSE actually...
-    my $i=shift;
-    my $j=$i<=0?0:$i>>1;
-    my $mm=$i<=0?"mm0":"mm".($i&1);
-
-	&add	(&LB($yy),&LB($tx));
-	&lea	(@XX[1],&DWP(1,@XX[0]));
-	&pxor	("mm2","mm0")				if ($i==0);
-	&psllq	("mm1",8)				if ($i==0);
-	&and	(@XX[1],0xff);
-	&pxor	("mm0","mm0")				if ($i<=0);
-	&mov	($ty,&DWP(0,$dat,$yy,4));
-	&mov	(&DWP(0,$dat,$yy,4),$tx);
-	&pxor	("mm1","mm2")				if ($i==0);
-	&mov	(&DWP(0,$dat,$XX[0],4),$ty);
-	&add	(&LB($ty),&LB($tx));
-	&movd	(@XX[0],"mm7")				if ($i==0);
-	&mov	($tx,&DWP(0,$dat,@XX[1],4));
-	&pxor	("mm1","mm1")				if ($i==1);
-	&movq	("mm2",&QWP(0,$inp))			if ($i==1);
-	&movq	(&QWP(-8,(@XX[0],$inp)),"mm1")		if ($i==0);
-	&pinsrw	($mm,&DWP(0,$dat,$ty,4),$j);
-
-	push	(@XX,shift(@XX))			if ($i>=0);
-  }
-} else {
-  # Using pinsrw here improves performane on Intel CPUs by 2-3%, but
-  # brings down AMD by 7%...
-  $RC4_loop_mmx = sub {
-    my $i=shift;
-
-	&add	(&LB($yy),&LB($tx));
-	&psllq	("mm1",8*(($i-1)&7))			if (abs($i)!=1);
-	&mov	($ty,&DWP(0,$dat,$yy,4));
-	&mov	(&DWP(0,$dat,$yy,4),$tx);
-	&mov	(&DWP(0,$dat,$xx,4),$ty);
-	&inc	($xx);
-	&add	($ty,$tx);
-	&movz	($xx,&LB($xx));				# (*)
-	&movz	($ty,&LB($ty));				# (*)
-	&pxor	("mm2",$i==1?"mm0":"mm1")		if ($i>=0);
-	&movq	("mm0",&QWP(0,$inp))			if ($i<=0);
-	&movq	(&QWP(-8,($out,$inp)),"mm2")		if ($i==0);
-	&mov	($tx,&DWP(0,$dat,$xx,4));
-	&movd	($i>0?"mm1":"mm2",&DWP(0,$dat,$ty,4));
-
-	# (*)	This is the key to Core2 and Westmere performance.
-	#	Whithout movz out-of-order execution logic confuses
-	#	itself and fails to reorder loads and stores. Problem
-	#	appears to be fixed in Sandy Bridge...
-  }
-}
-
-&external_label("OPENSSL_ia32cap_P");
-
-# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out);
-&function_begin("RC4");
-	&mov	($dat,&wparam(0));	# load key schedule pointer
-	&mov	($ty, &wparam(1));	# load len
-	&mov	($inp,&wparam(2));	# load inp
-	&mov	($out,&wparam(3));	# load out
-
-	&xor	($xx,$xx);		# avoid partial register stalls
-	&xor	($yy,$yy);
-
-	&cmp	($ty,0);		# safety net
-	&je	(&label("abort"));
-
-	&mov	(&LB($xx),&BP(0,$dat));	# load key->x
-	&mov	(&LB($yy),&BP(4,$dat));	# load key->y
-	&add	($dat,8);
-
-	&lea	($tx,&DWP(0,$inp,$ty));
-	&sub	($out,$inp);		# re-bias out
-	&mov	(&wparam(1),$tx);	# save input+len
-
-	&inc	(&LB($xx));
-
-	# detect compressed key schedule...
-	&cmp	(&DWP(256,$dat),-1);
-	&je	(&label("RC4_CHAR"));
-
-	&mov	($tx,&DWP(0,$dat,$xx,4));
-
-	&and	($ty,-4);		# how many 4-byte chunks?
-	&jz	(&label("loop1"));
-
-	&test	($ty,-8);
-	&mov	(&wparam(3),$out);	# $out as accumulator in these loops
-	&jz	(&label("go4loop4"));
-
-	&picmeup($out,"OPENSSL_ia32cap_P");
-	&bt	(&DWP(0,$out),26);	# check SSE2 bit [could have been MMX]
-	&jnc	(&label("go4loop4"));
-
-	&mov	($out,&wparam(3))	if (!$alt);
-	&movd	("mm7",&wparam(3))	if ($alt);
-	&and	($ty,-8);
-	&lea	($ty,&DWP(-8,$inp,$ty));
-	&mov	(&DWP(-4,$dat),$ty);	# save input+(len/8)*8-8
-
-	&$RC4_loop_mmx(-1);
-	&jmp(&label("loop_mmx_enter"));
-
-	&set_label("loop_mmx",16);
-		&$RC4_loop_mmx(0);
-	&set_label("loop_mmx_enter");
-		for 	($i=1;$i<8;$i++) { &$RC4_loop_mmx($i); }
-		&mov	($ty,$yy);
-		&xor	($yy,$yy);		# this is second key to Core2
-		&mov	(&LB($yy),&LB($ty));	# and Westmere performance...
-		&cmp	($inp,&DWP(-4,$dat));
-		&lea	($inp,&DWP(8,$inp));
-	&jb	(&label("loop_mmx"));
-
-    if ($alt) {
-	&movd	($out,"mm7");
-	&pxor	("mm2","mm0");
-	&psllq	("mm1",8);
-	&pxor	("mm1","mm2");
-	&movq	(&QWP(-8,$out,$inp),"mm1");
-    } else {
-	&psllq	("mm1",56);
-	&pxor	("mm2","mm1");
-	&movq	(&QWP(-8,$out,$inp),"mm2");
-    }
-	&emms	();
-
-	&cmp	($inp,&wparam(1));	# compare to input+len
-	&je	(&label("done"));
-	&jmp	(&label("loop1"));
-
-&set_label("go4loop4",16);
-	&lea	($ty,&DWP(-4,$inp,$ty));
-	&mov	(&wparam(2),$ty);	# save input+(len/4)*4-4
-
-	&set_label("loop4");
-		for ($i=0;$i<4;$i++) { RC4_loop($i); }
-		&ror	($out,8);
-		&xor	($out,&DWP(0,$inp));
-		&cmp	($inp,&wparam(2));	# compare to input+(len/4)*4-4
-		&mov	(&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here
-		&lea	($inp,&DWP(4,$inp));
-		&mov	($tx,&DWP(0,$dat,$xx,4));
-	&jb	(&label("loop4"));
-
-	&cmp	($inp,&wparam(1));	# compare to input+len
-	&je	(&label("done"));
-	&mov	($out,&wparam(3));	# restore $out
-
-	&set_label("loop1",16);
-		&add	(&LB($yy),&LB($tx));
-		&mov	($ty,&DWP(0,$dat,$yy,4));
-		&mov	(&DWP(0,$dat,$yy,4),$tx);
-		&mov	(&DWP(0,$dat,$xx,4),$ty);
-		&add	($ty,$tx);
-		&inc	(&LB($xx));
-		&and	($ty,0xff);
-		&mov	($ty,&DWP(0,$dat,$ty,4));
-		&xor	(&LB($ty),&BP(0,$inp));
-		&lea	($inp,&DWP(1,$inp));
-		&mov	($tx,&DWP(0,$dat,$xx,4));
-		&cmp	($inp,&wparam(1));	# compare to input+len
-		&mov	(&BP(-1,$out,$inp),&LB($ty));
-	&jb	(&label("loop1"));
-
-	&jmp	(&label("done"));
-
-# this is essentially Intel P4 specific codepath...
-&set_label("RC4_CHAR",16);
-	&movz	($tx,&BP(0,$dat,$xx));
-	# strangely enough unrolled loop performs over 20% slower...
-	&set_label("cloop1");
-		&add	(&LB($yy),&LB($tx));
-		&movz	($ty,&BP(0,$dat,$yy));
-		&mov	(&BP(0,$dat,$yy),&LB($tx));
-		&mov	(&BP(0,$dat,$xx),&LB($ty));
-		&add	(&LB($ty),&LB($tx));
-		&movz	($ty,&BP(0,$dat,$ty));
-		&add	(&LB($xx),1);
-		&xor	(&LB($ty),&BP(0,$inp));
-		&lea	($inp,&DWP(1,$inp));
-		&movz	($tx,&BP(0,$dat,$xx));
-		&cmp	($inp,&wparam(1));
-		&mov	(&BP(-1,$out,$inp),&LB($ty));
-	&jb	(&label("cloop1"));
-
-&set_label("done");
-	&dec	(&LB($xx));
-	&mov	(&DWP(-4,$dat),$yy);		# save key->y
-	&mov	(&BP(-8,$dat),&LB($xx));	# save key->x
-&set_label("abort");
-&function_end("RC4");
-
-########################################################################
-
-$inp="esi";
-$out="edi";
-$idi="ebp";
-$ido="ecx";
-$idx="edx";
-
-# void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data);
-&function_begin("private_RC4_set_key");
-	&mov	($out,&wparam(0));		# load key
-	&mov	($idi,&wparam(1));		# load len
-	&mov	($inp,&wparam(2));		# load data
-	&picmeup($idx,"OPENSSL_ia32cap_P");
-
-	&lea	($out,&DWP(2*4,$out));		# &key->data
-	&lea	($inp,&DWP(0,$inp,$idi));	# $inp to point at the end
-	&neg	($idi);
-	&xor	("eax","eax");
-	&mov	(&DWP(-4,$out),$idi);		# borrow key->y
-
-	&bt	(&DWP(0,$idx),20);		# check for bit#20
-	&jc	(&label("c1stloop"));
-
-&set_label("w1stloop",16);
-	&mov	(&DWP(0,$out,"eax",4),"eax");	# key->data[i]=i;
-	&add	(&LB("eax"),1);			# i++;
-	&jnc	(&label("w1stloop"));
-
-	&xor	($ido,$ido);
-	&xor	($idx,$idx);
-
-&set_label("w2ndloop",16);
-	&mov	("eax",&DWP(0,$out,$ido,4));
-	&add	(&LB($idx),&BP(0,$inp,$idi));
-	&add	(&LB($idx),&LB("eax"));
-	&add	($idi,1);
-	&mov	("ebx",&DWP(0,$out,$idx,4));
-	&jnz	(&label("wnowrap"));
-	  &mov	($idi,&DWP(-4,$out));
-	&set_label("wnowrap");
-	&mov	(&DWP(0,$out,$idx,4),"eax");
-	&mov	(&DWP(0,$out,$ido,4),"ebx");
-	&add	(&LB($ido),1);
-	&jnc	(&label("w2ndloop"));
-&jmp	(&label("exit"));
-
-# Unlike all other x86 [and x86_64] implementations, Intel P4 core
-# [including EM64T] was found to perform poorly with above "32-bit" key
-# schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded
-# assembler turned out to be 3.5x if re-coded for compressed 8-bit one,
-# a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit
-# schedule for x86[_64], because non-P4 implementations suffer from
-# significant performance losses then, e.g. PIII exhibits >2x
-# deterioration, and so does Opteron. In order to assure optimal
-# all-round performance, we detect P4 at run-time and set up compressed
-# key schedule, which is recognized by RC4 procedure.
-
-&set_label("c1stloop",16);
-	&mov	(&BP(0,$out,"eax"),&LB("eax"));	# key->data[i]=i;
-	&add	(&LB("eax"),1);			# i++;
-	&jnc	(&label("c1stloop"));
-
-	&xor	($ido,$ido);
-	&xor	($idx,$idx);
-	&xor	("ebx","ebx");
-
-&set_label("c2ndloop",16);
-	&mov	(&LB("eax"),&BP(0,$out,$ido));
-	&add	(&LB($idx),&BP(0,$inp,$idi));
-	&add	(&LB($idx),&LB("eax"));
-	&add	($idi,1);
-	&mov	(&LB("ebx"),&BP(0,$out,$idx));
-	&jnz	(&label("cnowrap"));
-	  &mov	($idi,&DWP(-4,$out));
-	&set_label("cnowrap");
-	&mov	(&BP(0,$out,$idx),&LB("eax"));
-	&mov	(&BP(0,$out,$ido),&LB("ebx"));
-	&add	(&LB($ido),1);
-	&jnc	(&label("c2ndloop"));
-
-	&mov	(&DWP(256,$out),-1);		# mark schedule as compressed
-
-&set_label("exit");
-	&xor	("eax","eax");
-	&mov	(&DWP(-8,$out),"eax");		# key->x=0;
-	&mov	(&DWP(-4,$out),"eax");		# key->y=0;
-&function_end("private_RC4_set_key");
-
-# const char *RC4_options(void);
-&function_begin_B("RC4_options");
-	&call	(&label("pic_point"));
-&set_label("pic_point");
-	&blindpop("eax");
-	&lea	("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax"));
-	&picmeup("edx","OPENSSL_ia32cap_P");
-	&mov	("edx",&DWP(0,"edx"));
-	&bt	("edx",20);
-	&jc	(&label("1xchar"));
-	&bt	("edx",26);
-	&jnc	(&label("ret"));
-	&add	("eax",25);
-	&ret	();
-&set_label("1xchar");
-	&add	("eax",12);
-&set_label("ret");
-	&ret	();
-&set_label("opts",64);
-&asciz	("rc4(4x,int)");
-&asciz	("rc4(1x,char)");
-&asciz	("rc4(8x,mmx)");
-&asciz	("RC4 for x86, CRYPTOGAMS by <appro\@openssl.org>");
-&align	(64);
-&function_end_B("RC4_options");
-
-&asm_finish();
-
diff --git a/drivers/builtin_openssl/crypto/rc4/asm/rc4-ia64.pl b/drivers/builtin_openssl/crypto/rc4/asm/rc4-ia64.pl
deleted file mode 100644
index 49cd5b5e69..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/asm/rc4-ia64.pl
+++ /dev/null
@@ -1,755 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by David Mosberger <David.Mosberger@acm.org> based on the
-# Itanium optimized Crypto code which was released by HP Labs at
-# http://www.hpl.hp.com/research/linux/crypto/.
-#
-# Copyright (c) 2005 Hewlett-Packard Development Company, L.P.
-#
-# Permission is hereby granted, free of charge, to any person obtaining
-# a copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish,
-# distribute, sublicense, and/or sell copies of the Software, and to
-# permit persons to whom the Software is furnished to do so, subject to
-# the following conditions:
-#
-# The above copyright notice and this permission notice shall be
-# included in all copies or substantial portions of the Software.
-
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
-
-
-
-# This is a little helper program which generates a software-pipelined
-# for RC4 encryption.  The basic algorithm looks like this:
-#
-#   for (counter = 0; counter < len; ++counter)
-#     {
-#       in = inp[counter];
-#       SI = S[I];
-#       J = (SI + J) & 0xff;
-#       SJ = S[J];
-#       T = (SI + SJ) & 0xff;
-#       S[I] = SJ, S[J] = SI;
-#       ST = S[T];
-#       outp[counter] = in ^ ST;
-#       I = (I + 1) & 0xff;
-#     }
-#
-# Pipelining this loop isn't easy, because the stores to the S[] array
-# need to be observed in the right order.  The loop generated by the
-# code below has the following pipeline diagram:
-#
-#      cycle
-#     | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 |16 |17 |
-# iter
-#   1: xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
-#   2:             xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
-#   3:                         xxx LDI xxx xxx xxx LDJ xxx SWP xxx LDT xxx xxx
-#
-#   where:
-# 	LDI = load of S[I]
-# 	LDJ = load of S[J]
-# 	SWP = swap of S[I] and S[J]
-# 	LDT = load of S[T]
-#
-# Note that in the above diagram, the major trouble-spot is that LDI
-# of the 2nd iteration is performed BEFORE the SWP of the first
-# iteration.  Fortunately, this is easy to detect (I of the 1st
-# iteration will be equal to J of the 2nd iteration) and when this
-# happens, we simply forward the proper value from the 1st iteration
-# to the 2nd one.  The proper value in this case is simply the value
-# of S[I] from the first iteration (thanks to the fact that SWP
-# simply swaps the contents of S[I] and S[J]).
-#
-# Another potential trouble-spot is in cycle 7, where SWP of the 1st
-# iteration issues at the same time as the LDI of the 3rd iteration.
-# However, thanks to IA-64 execution semantics, this can be taken
-# care of simply by placing LDI later in the instruction-group than
-# SWP.  IA-64 CPUs will automatically forward the value if they
-# detect that the SWP and LDI are accessing the same memory-location.
-
-# The core-loop that can be pipelined then looks like this (annotated
-# with McKinley/Madison issue port & latency numbers, assuming L1
-# cache hits for the most part):
-
-# operation:	    instruction:		    issue-ports:  latency
-# ------------------  -----------------------------   ------------- -------
-
-# Data = *inp++       ld1 data = [inp], 1             M0-M1         1 cyc     c0
-#                     shladd Iptr = I, KeyTable, 3    M0-M3, I0, I1 1 cyc
-# I = (I + 1) & 0xff  padd1 nextI = I, one            M0-M3, I0, I1 3 cyc
-#                     ;;
-# SI = S[I]           ld8 SI = [Iptr]                 M0-M1         1 cyc     c1 * after SWAP!
-#                     ;;
-#                     cmp.eq.unc pBypass = I, J                                  * after J is valid!
-# J = SI + J          add J = J, SI                   M0-M3, I0, I1 1 cyc     c2
-#                     (pBypass) br.cond.spnt Bypass
-#                     ;;
-# ---------------------------------------------------------------------------------------
-# J = J & 0xff        zxt1 J = J                      I0, I1, 1 cyc           c3
-#                     ;;
-#                     shladd Jptr = J, KeyTable, 3    M0-M3, I0, I1 1 cyc     c4
-#                     ;;
-# SJ = S[J]           ld8 SJ = [Jptr]                 M0-M1         1 cyc     c5
-#                     ;;
-# ---------------------------------------------------------------------------------------
-# T = (SI + SJ)       add T = SI, SJ                  M0-M3, I0, I1 1 cyc     c6
-#                     ;;
-# T = T & 0xff        zxt1 T = T                      I0, I1        1 cyc
-# S[I] = SJ           st8 [Iptr] = SJ                 M2-M3                   c7
-# S[J] = SI           st8 [Jptr] = SI                 M2-M3
-#                     ;;
-#                     shladd Tptr = T, KeyTable, 3    M0-M3, I0, I1 1 cyc     c8
-#                     ;;
-# ---------------------------------------------------------------------------------------
-# T = S[T]            ld8 T = [Tptr]                  M0-M1         1 cyc     c9
-#                     ;;
-# data ^= T           xor data = data, T              M0-M3, I0, I1 1 cyc     c10
-#                     ;;
-# *out++ = Data ^ T   dep word = word, data, 8, POS   I0, I1        1 cyc     c11
-#                     ;;
-# ---------------------------------------------------------------------------------------
-
-# There are several points worth making here:
-
-#   - Note that due to the bypass/forwarding-path, the first two
-#     phases of the loop are strangly mingled together.  In
-#     particular, note that the first stage of the pipeline is
-#     using the value of "J", as calculated by the second stage.
-#   - Each bundle-pair will have exactly 6 instructions.
-#   - Pipelined, the loop can execute in 3 cycles/iteration and
-#     4 stages.  However, McKinley/Madison can issue "st1" to
-#     the same bank at a rate of at most one per 4 cycles.  Thus,
-#     instead of storing each byte, we accumulate them in a word
-#     and then write them back at once with a single "st8" (this
-#     implies that the setup code needs to ensure that the output
-#     buffer is properly aligned, if need be, by encoding the
-#     first few bytes separately).
-#   - There is no space for a "br.ctop" instruction.  For this
-#     reason we can't use module-loop support in IA-64 and have
-#     to do a traditional, purely software-pipelined loop.
-#   - We can't replace any of the remaining "add/zxt1" pairs with
-#     "padd1" because the latency for that instruction is too high
-#     and would push the loop to the point where more bypasses
-#     would be needed, which we don't have space for.
-#   - The above loop runs at around 3.26 cycles/byte, or roughly
-#     440 MByte/sec on a 1.5GHz Madison.  This is well below the
-#     system bus bandwidth and hence with judicious use of
-#     "lfetch" this loop can run at (almost) peak speed even when
-#     the input and output data reside in memory.  The
-#     max. latency that can be tolerated is (PREFETCH_DISTANCE *
-#     L2_LINE_SIZE * 3 cyc), or about 384 cycles assuming (at
-#     least) 1-ahead prefetching of 128 byte cache-lines.  Note
-#     that we do NOT prefetch into L1, since that would only
-#     interfere with the S[] table values stored there.  This is
-#     acceptable because there is a 10 cycle latency between
-#     load and first use of the input data.
-#   - We use a branch to out-of-line bypass-code of cycle-pressure:
-#     we calculate the next J, check for the need to activate the
-#     bypass path, and activate the bypass path ALL IN THE SAME
-#     CYCLE.  If we didn't have these constraints, we could do
-#     the bypass with a simple conditional move instruction.
-#     Fortunately, the bypass paths get activated relatively
-#     infrequently, so the extra branches don't cost all that much
-#     (about 0.04 cycles/byte, measured on a 16396 byte file with
-#     random input data).
-#
-
-$phases = 4;		# number of stages/phases in the pipelined-loop
-$unroll_count = 6;	# number of times we unrolled it
-$pComI = (1 << 0);
-$pComJ = (1 << 1);
-$pComT = (1 << 2);
-$pOut  = (1 << 3);
-
-$NData = 4;
-$NIP = 3;
-$NJP = 2;
-$NI = 2;
-$NSI = 3;
-$NSJ = 2;
-$NT = 2;
-$NOutWord = 2;
-
-#
-# $threshold is the minimum length before we attempt to use the
-# big software-pipelined loop.  It MUST be greater-or-equal
-# to:
-#  		PHASES * (UNROLL_COUNT + 1) + 7
-#
-# The "+ 7" comes from the fact we may have to encode up to
-#   7 bytes separately before the output pointer is aligned.
-#
-$threshold = (3 * ($phases * ($unroll_count + 1)) + 7);
-
-sub I {
-    local *code = shift;
-    local $format = shift;
-    $code .= sprintf ("\t\t".$format."\n", @_);
-}
-
-sub P {
-    local *code = shift;
-    local $format = shift;
-    $code .= sprintf ($format."\n", @_);
-}
-
-sub STOP {
-    local *code = shift;
-    $code .=<<___;
-		;;
-___
-}
-
-sub emit_body {
-    local *c = shift;
-    local *bypass = shift;
-    local ($iteration, $p) = @_;
-
-    local $i0 = $iteration;
-    local $i1 = $iteration - 1;
-    local $i2 = $iteration - 2;
-    local $i3 = $iteration - 3;
-    local $iw0 = ($iteration - 3) / 8;
-    local $iw1 = ($iteration > 3) ? ($iteration - 4) / 8 : 1;
-    local $byte_num = ($iteration - 3) % 8;
-    local $label = $iteration + 1;
-    local $pAny = ($p & 0xf) == 0xf;
-    local $pByp = (($p & $pComI) && ($iteration > 0));
-
-    $c.=<<___;
-//////////////////////////////////////////////////
-___
-
-    if (($p & 0xf) == 0) {
-	$c.="#ifdef HOST_IS_BIG_ENDIAN\n";
-	&I(\$c,"shr.u	OutWord[%u] = OutWord[%u], 32;;",
-				$iw1 % $NOutWord, $iw1 % $NOutWord);
-	$c.="#endif\n";
-	&I(\$c, "st4 [OutPtr] = OutWord[%u], 4", $iw1 % $NOutWord);
-	return;
-    }
-
-    # Cycle 0
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "ld1    Data[%u] = [InPtr], 1", $i0 % $NData)     if ($p & $pComI);
-    &I(\$c, "padd1  I[%u] = One, I[%u]", $i0 % $NI, $i1 % $NI)if ($p & $pComI);
-    &I(\$c, "zxt1   J = J")				      if ($p & $pComJ);
-    &I(\$c, "}")					      if ($pAny);
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "LKEY   T[%u] = [T[%u]]", $i1 % $NT, $i1 % $NT)   if ($p & $pOut);
-    &I(\$c, "add    T[%u] = SI[%u], SJ[%u]",
-       $i0 % $NT, $i2 % $NSI, $i1 % $NSJ)		      if ($p & $pComT);
-    &I(\$c, "KEYADDR(IPr[%u], I[%u])", $i0 % $NIP, $i1 % $NI) if ($p & $pComI);
-    &I(\$c, "}")					      if ($pAny);
-    &STOP(\$c);
-
-    # Cycle 1
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "SKEY   [IPr[%u]] = SJ[%u]", $i2 % $NIP, $i1%$NSJ)if ($p & $pComT);
-    &I(\$c, "SKEY   [JP[%u]] = SI[%u]", $i1 % $NJP, $i2%$NSI) if ($p & $pComT);
-    &I(\$c, "zxt1   T[%u] = T[%u]", $i0 % $NT, $i0 % $NT)     if ($p & $pComT);
-    &I(\$c, "}")					      if ($pAny);
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "LKEY   SI[%u] = [IPr[%u]]", $i0 % $NSI, $i0%$NIP)if ($p & $pComI);
-    &I(\$c, "KEYADDR(JP[%u], J)", $i0 % $NJP)		      if ($p & $pComJ);
-    &I(\$c, "xor    Data[%u] = Data[%u], T[%u]",
-       $i3 % $NData, $i3 % $NData, $i1 % $NT)		      if ($p & $pOut);
-    &I(\$c, "}")					      if ($pAny);
-    &STOP(\$c);
-
-    # Cycle 2
-    &I(\$c, "{ .mmi")					      if ($pAny);
-    &I(\$c, "LKEY   SJ[%u] = [JP[%u]]", $i0 % $NSJ, $i0%$NJP) if ($p & $pComJ);
-    &I(\$c, "cmp.eq pBypass, p0 = I[%u], J", $i1 % $NI)	      if ($pByp);
-    &I(\$c, "dep OutWord[%u] = Data[%u], OutWord[%u], BYTE_POS(%u), 8",
-       $iw0%$NOutWord, $i3%$NData, $iw1%$NOutWord, $byte_num) if ($p & $pOut);
-    &I(\$c, "}")					      if ($pAny);
-    &I(\$c, "{ .mmb")					      if ($pAny);
-    &I(\$c, "add    J = J, SI[%u]", $i0 % $NSI)		      if ($p & $pComI);
-    &I(\$c, "KEYADDR(T[%u], T[%u])", $i0 % $NT, $i0 % $NT)    if ($p & $pComT);
-    &P(\$c, "(pBypass)\tbr.cond.spnt.many .rc4Bypass%u",$label)if ($pByp);
-    &I(\$c, "}") if ($pAny);
-    &STOP(\$c);
-
-    &P(\$c, ".rc4Resume%u:", $label)			      if ($pByp);
-    if ($byte_num == 0 && $iteration >= $phases) {
-	&I(\$c, "st8 [OutPtr] = OutWord[%u], 8",
-	   $iw1 % $NOutWord)				      if ($p & $pOut);
-	if ($iteration == (1 + $unroll_count) * $phases - 1) {
-	    if ($unroll_count == 6) {
-		&I(\$c, "mov OutWord[%u] = OutWord[%u]",
-		   $iw1 % $NOutWord, $iw0 % $NOutWord);
-	    }
-	    &I(\$c, "lfetch.nt1 [InPrefetch], %u",
-	       $unroll_count * $phases);
-	    &I(\$c, "lfetch.excl.nt1 [OutPrefetch], %u",
-	       $unroll_count * $phases);
-	    &I(\$c, "br.cloop.sptk.few .rc4Loop");
-	}
-    }
-
-    if ($pByp) {
-	&P(\$bypass, ".rc4Bypass%u:", $label);
-	&I(\$bypass, "sub J = J, SI[%u]", $i0 % $NSI);
-	&I(\$bypass, "nop 0");
-	&I(\$bypass, "nop 0");
-	&I(\$bypass, ";;");
-	&I(\$bypass, "add J = J, SI[%u]", $i1 % $NSI);
-	&I(\$bypass, "mov SI[%u] = SI[%u]", $i0 % $NSI, $i1 % $NSI);
-	&I(\$bypass, "br.sptk.many .rc4Resume%u\n", $label);
-	&I(\$bypass, ";;");
-    }
-}
-
-$code=<<___;
-.ident \"rc4-ia64.s, version 3.0\"
-.ident \"Copyright (c) 2005 Hewlett-Packard Development Company, L.P.\"
-
-#define LCSave		r8
-#define PRSave		r9
-
-/* Inputs become invalid once rotation begins!  */
-
-#define StateTable	in0
-#define DataLen		in1
-#define InputBuffer	in2
-#define OutputBuffer	in3
-
-#define KTable		r14
-#define J		r15
-#define InPtr		r16
-#define OutPtr		r17
-#define InPrefetch	r18
-#define OutPrefetch	r19
-#define One		r20
-#define LoopCount	r21
-#define Remainder	r22
-#define IFinal		r23
-#define EndPtr		r24
-
-#define tmp0		r25
-#define tmp1		r26
-
-#define pBypass		p6
-#define pDone		p7
-#define pSmall		p8
-#define pAligned	p9
-#define pUnaligned	p10
-
-#define pComputeI	pPhase[0]
-#define pComputeJ	pPhase[1]
-#define pComputeT	pPhase[2]
-#define pOutput		pPhase[3]
-
-#define RetVal		r8
-#define L_OK		p7
-#define L_NOK		p8
-
-#define	_NINPUTS	4
-#define	_NOUTPUT	0
-
-#define	_NROTATE	24
-#define	_NLOCALS	(_NROTATE - _NINPUTS - _NOUTPUT)
-
-#ifndef SZ
-# define SZ	4	// this must be set to sizeof(RC4_INT)
-#endif
-
-#if SZ == 1
-# define LKEY			ld1
-# define SKEY			st1
-# define KEYADDR(dst, i)	add dst = i, KTable
-#elif SZ == 2
-# define LKEY			ld2
-# define SKEY			st2
-# define KEYADDR(dst, i)	shladd dst = i, 1, KTable
-#elif SZ == 4
-# define LKEY			ld4
-# define SKEY			st4
-# define KEYADDR(dst, i)	shladd dst = i, 2, KTable
-#else
-# define LKEY			ld8
-# define SKEY			st8
-# define KEYADDR(dst, i)	shladd dst = i, 3, KTable
-#endif
-
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-# define ADDP	addp4
-#else
-# define ADDP	add
-#endif
-
-/* Define a macro for the bit number of the n-th byte: */
-
-#if defined(_HPUX_SOURCE) || defined(B_ENDIAN)
-# define HOST_IS_BIG_ENDIAN
-# define BYTE_POS(n)	(56 - (8 * (n)))
-#else
-# define BYTE_POS(n)	(8 * (n))
-#endif
-
-/*
-   We must perform the first phase of the pipeline explicitly since
-   we will always load from the stable the first time. The br.cexit
-   will never be taken since regardless of the number of bytes because
-   the epilogue count is 4.
-*/
-/* MODSCHED_RC4 macro was split to _PROLOGUE and _LOOP, because HP-UX
-   assembler failed on original macro with syntax error. <appro> */
-#define MODSCHED_RC4_PROLOGUE						   \\
-	{								   \\
-				ld1		Data[0] = [InPtr], 1;	   \\
-				add		IFinal = 1, I[1];	   \\
-				KEYADDR(IPr[0], I[1]);			   \\
-	} ;;								   \\
-	{								   \\
-				LKEY		SI[0] = [IPr[0]];	   \\
-				mov		pr.rot = 0x10000;	   \\
-				mov		ar.ec = 4;		   \\
-	} ;;								   \\
-	{								   \\
-				add		J = J, SI[0];		   \\
-				zxt1		I[0] = IFinal;		   \\
-				br.cexit.spnt.few .+16; /* never taken */  \\
-	} ;;
-#define MODSCHED_RC4_LOOP(label)					   \\
-label:									   \\
-	{	.mmi;							   \\
-		(pComputeI)	ld1		Data[0] = [InPtr], 1;	   \\
-		(pComputeI)	add		IFinal = 1, I[1];	   \\
-		(pComputeJ)	zxt1		J = J;			   \\
-	}{	.mmi;							   \\
-		(pOutput)	LKEY		T[1] = [T[1]];		   \\
-		(pComputeT)	add		T[0] = SI[2], SJ[1];	   \\
-		(pComputeI)	KEYADDR(IPr[0], I[1]);			   \\
-	} ;;								   \\
-	{	.mmi;							   \\
-		(pComputeT)	SKEY		[IPr[2]] = SJ[1];	   \\
-		(pComputeT)	SKEY		[JP[1]] = SI[2];	   \\
-		(pComputeT)	zxt1		T[0] = T[0];		   \\
-	}{	.mmi;							   \\
-		(pComputeI)	LKEY		SI[0] = [IPr[0]];	   \\
-		(pComputeJ)	KEYADDR(JP[0], J);			   \\
-		(pComputeI)	cmp.eq.unc	pBypass, p0 = I[1], J;	   \\
-	} ;;								   \\
-	{	.mmi;							   \\
-		(pComputeJ)	LKEY		SJ[0] = [JP[0]];	   \\
-		(pOutput)	xor		Data[3] = Data[3], T[1];   \\
-				nop		0x0;			   \\
-	}{	.mmi;							   \\
-		(pComputeT)	KEYADDR(T[0], T[0]);			   \\
-		(pBypass)	mov		SI[0] = SI[1];		   \\
-		(pComputeI)	zxt1		I[0] = IFinal;		   \\
-	} ;;								   \\
-	{	.mmb;							   \\
-		(pOutput)	st1		[OutPtr] = Data[3], 1;	   \\
-		(pComputeI)	add		J = J, SI[0];		   \\
-				br.ctop.sptk.few label;			   \\
-	} ;;
-
-	.text
-
-	.align	32
-
-	.type	RC4, \@function
-	.global	RC4
-
-	.proc	RC4
-	.prologue
-
-RC4:
-	{
-	  	.mmi
-		alloc	r2 = ar.pfs, _NINPUTS, _NLOCALS, _NOUTPUT, _NROTATE
-
-		.rotr Data[4], I[2], IPr[3], SI[3], JP[2], SJ[2], T[2], \\
-		      OutWord[2]
-		.rotp pPhase[4]
-
-		ADDP		InPrefetch = 0, InputBuffer
-		ADDP		KTable = 0, StateTable
-	}
-	{
-		.mmi
-		ADDP		InPtr = 0, InputBuffer
-		ADDP		OutPtr = 0, OutputBuffer
-		mov		RetVal = r0
-	}
-	;;
-	{
-		.mmi
-		lfetch.nt1	[InPrefetch], 0x80
-		ADDP		OutPrefetch = 0, OutputBuffer
-	}
-	{               // Return 0 if the input length is nonsensical
-        	.mib
-		ADDP		StateTable = 0, StateTable
-        	cmp.ge.unc  	L_NOK, L_OK = r0, DataLen
-	(L_NOK) br.ret.sptk.few rp
-	}
-	;;
-	{
-        	.mib
-        	cmp.eq.or  	L_NOK, L_OK = r0, InPtr
-        	cmp.eq.or  	L_NOK, L_OK = r0, OutPtr
-		nop		0x0
-	}
-	{
-		.mib
-        	cmp.eq.or  	L_NOK, L_OK = r0, StateTable
-		nop		0x0
-	(L_NOK) br.ret.sptk.few rp
-	}
-	;;
-		LKEY		I[1] = [KTable], SZ
-/* Prefetch the state-table. It contains 256 elements of size SZ */
-
-#if SZ == 1
-		ADDP		tmp0 = 1*128, StateTable
-#elif SZ == 2
-		ADDP		tmp0 = 3*128, StateTable
-		ADDP		tmp1 = 2*128, StateTable
-#elif SZ == 4
-		ADDP		tmp0 = 7*128, StateTable
-		ADDP		tmp1 = 6*128, StateTable
-#elif SZ == 8
-		ADDP		tmp0 = 15*128, StateTable
-		ADDP		tmp1 = 14*128, StateTable
-#endif
-		;;
-#if SZ >= 8
-		lfetch.fault.nt1		[tmp0], -256	// 15
-		lfetch.fault.nt1		[tmp1], -256;;
-		lfetch.fault.nt1		[tmp0], -256	// 13
-		lfetch.fault.nt1		[tmp1], -256;;
-		lfetch.fault.nt1		[tmp0], -256	// 11
-		lfetch.fault.nt1		[tmp1], -256;;
-		lfetch.fault.nt1		[tmp0], -256	//  9
-		lfetch.fault.nt1		[tmp1], -256;;
-#endif
-#if SZ >= 4
-		lfetch.fault.nt1		[tmp0], -256	//  7
-		lfetch.fault.nt1		[tmp1], -256;;
-		lfetch.fault.nt1		[tmp0], -256	//  5
-		lfetch.fault.nt1		[tmp1], -256;;
-#endif
-#if SZ >= 2
-		lfetch.fault.nt1		[tmp0], -256	//  3
-		lfetch.fault.nt1		[tmp1], -256;;
-#endif
-	{
-		.mii
-		lfetch.fault.nt1		[tmp0]		//  1
-		add		I[1]=1,I[1];;
-		zxt1		I[1]=I[1]
-	}
-	{
-		.mmi
-		lfetch.nt1	[InPrefetch], 0x80
-		lfetch.excl.nt1	[OutPrefetch], 0x80
-		.save		pr, PRSave
-		mov		PRSave = pr
-	} ;;
-	{
-		.mmi
-		lfetch.excl.nt1	[OutPrefetch], 0x80
-		LKEY		J = [KTable], SZ
-		ADDP		EndPtr = DataLen, InPtr
-	}  ;;
-	{
-		.mmi
-		ADDP		EndPtr = -1, EndPtr	// Make it point to
-							// last data byte.
-		mov		One = 1
-		.save		ar.lc, LCSave
-		mov		LCSave = ar.lc
-		.body
-	} ;;
-	{
-		.mmb
-		sub		Remainder = 0, OutPtr
-		cmp.gtu		pSmall, p0 = $threshold, DataLen
-(pSmall)	br.cond.dpnt	.rc4Remainder		// Data too small for
-							// big loop.
-	} ;;
-	{
-		.mmi
-		and		Remainder = 0x7, Remainder
-		;;
-		cmp.eq		pAligned, pUnaligned = Remainder, r0
-		nop		0x0
-	} ;;
-	{
-		.mmb
-.pred.rel	"mutex",pUnaligned,pAligned
-(pUnaligned)	add		Remainder = -1, Remainder
-(pAligned)	sub		Remainder = EndPtr, InPtr
-(pAligned)	br.cond.dptk.many .rc4Aligned
-	} ;;
-	{
-		.mmi
-		nop		0x0
-		nop		0x0
-		mov.i		ar.lc = Remainder
-	}
-
-/* Do the initial few bytes via the compact, modulo-scheduled loop
-   until the output pointer is 8-byte-aligned.  */
-
-		MODSCHED_RC4_PROLOGUE
-		MODSCHED_RC4_LOOP(.RC4AlignLoop)
-
-	{
-		.mib
-		sub		Remainder = EndPtr, InPtr
-		zxt1		IFinal = IFinal
-		clrrrb				// Clear CFM.rrb.pr so
-		;;				// next "mov pr.rot = N"
-						// does the right thing.
-	}
-	{
-		.mmi
-		mov		I[1] = IFinal
-		nop		0x0
-		nop		0x0
-	} ;;
-
-
-.rc4Aligned:
-
-/*
-   Unrolled loop count = (Remainder - ($unroll_count+1)*$phases)/($unroll_count*$phases)
- */
-
-	{
-		.mlx
-		add	LoopCount = 1 - ($unroll_count + 1)*$phases, Remainder
-		movl		Remainder = 0xaaaaaaaaaaaaaaab
-	} ;;
-	{
-		.mmi
-		setf.sig	f6 = LoopCount		// M2, M3	6 cyc
-		setf.sig	f7 = Remainder		// M2, M3	6 cyc
-		nop		0x0
-	} ;;
-	{
-		.mfb
-		nop		0x0
-		xmpy.hu		f6 = f6, f7
-		nop		0x0
-	} ;;
-	{
-		.mmi
-		getf.sig	LoopCount = f6;;	// M2		5 cyc
-		nop		0x0
-		shr.u		LoopCount = LoopCount, 4
-	} ;;
-	{
-		.mmi
-		nop		0x0
-		nop		0x0
-		mov.i		ar.lc = LoopCount
-	} ;;
-
-/* Now comes the unrolled loop: */
-
-.rc4Prologue:
-___
-
-$iteration = 0;
-
-# Generate the prologue:
-$predicates = 1;
-for ($i = 0; $i < $phases; ++$i) {
-    &emit_body (\$code, \$bypass, $iteration++, $predicates);
-    $predicates = ($predicates << 1) | 1;
-}
-
-$code.=<<___;
-.rc4Loop:
-___
-
-# Generate the body:
-for ($i = 0; $i < $unroll_count*$phases; ++$i) {
-    &emit_body (\$code, \$bypass, $iteration++, $predicates);
-}
-
-$code.=<<___;
-.rc4Epilogue:
-___
-
-# Generate the epilogue:
-for ($i = 0; $i < $phases; ++$i) {
-    $predicates <<= 1;
-    &emit_body (\$code, \$bypass, $iteration++, $predicates);
-}
-
-$code.=<<___;
-	{
-		.mmi
-		lfetch.nt1	[EndPtr]	// fetch line with last byte
-		mov		IFinal = I[1]
-		nop		0x0
-	}
-
-.rc4Remainder:
-	{
-		.mmi
-		sub		Remainder = EndPtr, InPtr	// Calculate
-								// # of bytes
-								// left - 1
-		nop		0x0
-		nop		0x0
-	} ;;
-	{
-		.mib
-		cmp.eq		pDone, p0 = -1, Remainder // done already?
-		mov.i		ar.lc = Remainder
-(pDone)		br.cond.dptk.few .rc4Complete
-	}
-
-/* Do the remaining bytes via the compact, modulo-scheduled loop */
-
-		MODSCHED_RC4_PROLOGUE
-		MODSCHED_RC4_LOOP(.RC4RestLoop)
-
-.rc4Complete:
-	{
-		.mmi
-		add		KTable = -SZ, KTable
-		add		IFinal = -1, IFinal
-		mov		ar.lc = LCSave
-	} ;;
-	{
-		.mii
-		SKEY		[KTable] = J,-SZ
-		zxt1		IFinal = IFinal
-		mov		pr = PRSave, 0x1FFFF
-	} ;;
-	{
-		.mib
-		SKEY		[KTable] = IFinal
-		add		RetVal = 1, r0
-		br.ret.sptk.few	rp
-	} ;;
-___
-
-# Last but not least, emit the code for the bypass-code of the unrolled loop:
-
-$code.=$bypass;
-
-$code.=<<___;
-	.endp RC4
-___
-
-print $code;
diff --git a/drivers/builtin_openssl/crypto/rc4/asm/rc4-md5-x86_64.pl b/drivers/builtin_openssl/crypto/rc4/asm/rc4-md5-x86_64.pl
deleted file mode 100644
index 272fa91e1a..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/asm/rc4-md5-x86_64.pl
+++ /dev/null
@@ -1,632 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# June 2011
-#
-# This is RC4+MD5 "stitch" implementation. The idea, as spelled in
-# http://download.intel.com/design/intarch/papers/323686.pdf, is that
-# since both algorithms exhibit instruction-level parallelism, ILP,
-# below theoretical maximum, interleaving them would allow to utilize
-# processor resources better and achieve better performance. RC4
-# instruction sequence is virtually identical to rc4-x86_64.pl, which
-# is heavily based on submission by Maxim Perminov, Maxim Locktyukhin
-# and Jim Guilford of Intel. MD5 is fresh implementation aiming to
-# minimize register usage, which was used as "main thread" with RC4
-# weaved into it, one RC4 round per one MD5 round. In addition to the
-# stiched subroutine the script can generate standalone replacement
-# md5_block_asm_data_order and RC4. Below are performance numbers in
-# cycles per processed byte, less is better, for these the standalone
-# subroutines, sum of them, and stitched one:
-#
-#		RC4	MD5	RC4+MD5	stitch	gain
-# Opteron	6.5(*)	5.4	11.9	7.0	+70%(*)
-# Core2		6.5	5.8	12.3	7.7	+60%
-# Westmere	4.3	5.2	9.5	7.0	+36%
-# Sandy Bridge	4.2	5.5	9.7	6.8	+43%
-# Atom		9.3	6.5	15.8	11.1	+42%
-#
-# (*)	rc4-x86_64.pl delivers 5.3 on Opteron, so real improvement
-#	is +53%...
-
-my ($rc4,$md5)=(1,1);	# what to generate?
-my $D="#" if (!$md5);	# if set to "#", MD5 is stitched into RC4(),
-			# but its result is discarded. Idea here is
-			# to be able to use 'openssl speed rc4' for
-			# benchmarking the stitched subroutine... 
-
-my $flavour = shift;
-my $output  = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
-
-my $win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; my $dir=$1; my $xlate;
-( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
-( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
-die "can't locate x86_64-xlate.pl";
-
-open OUT,"| \"$^X\" $xlate $flavour $output";
-*STDOUT=*OUT;
-
-my ($dat,$in0,$out,$ctx,$inp,$len, $func,$nargs);
-
-if ($rc4 && !$md5) {
-  ($dat,$len,$in0,$out) = ("%rdi","%rsi","%rdx","%rcx");
-  $func="RC4";				$nargs=4;
-} elsif ($md5 && !$rc4) {
-  ($ctx,$inp,$len) = ("%rdi","%rsi","%rdx");
-  $func="md5_block_asm_data_order";	$nargs=3;
-} else {
-  ($dat,$in0,$out,$ctx,$inp,$len) = ("%rdi","%rsi","%rdx","%rcx","%r8","%r9");
-  $func="rc4_md5_enc";			$nargs=6;
-  # void rc4_md5_enc(
-  #		RC4_KEY *key,		#
-  #		const void *in0,	# RC4 input
-  #		void *out,		# RC4 output
-  #		MD5_CTX *ctx,		#
-  #		const void *inp,	# MD5 input
-  #		size_t len);		# number of 64-byte blocks
-}
-
-my @K=(	0xd76aa478,0xe8c7b756,0x242070db,0xc1bdceee,
-	0xf57c0faf,0x4787c62a,0xa8304613,0xfd469501,
-	0x698098d8,0x8b44f7af,0xffff5bb1,0x895cd7be,
-	0x6b901122,0xfd987193,0xa679438e,0x49b40821,
-
-	0xf61e2562,0xc040b340,0x265e5a51,0xe9b6c7aa,
-	0xd62f105d,0x02441453,0xd8a1e681,0xe7d3fbc8,
-	0x21e1cde6,0xc33707d6,0xf4d50d87,0x455a14ed,
-	0xa9e3e905,0xfcefa3f8,0x676f02d9,0x8d2a4c8a,
-
-	0xfffa3942,0x8771f681,0x6d9d6122,0xfde5380c,
-	0xa4beea44,0x4bdecfa9,0xf6bb4b60,0xbebfbc70,
-	0x289b7ec6,0xeaa127fa,0xd4ef3085,0x04881d05,
-	0xd9d4d039,0xe6db99e5,0x1fa27cf8,0xc4ac5665,
-
-	0xf4292244,0x432aff97,0xab9423a7,0xfc93a039,
-	0x655b59c3,0x8f0ccc92,0xffeff47d,0x85845dd1,
-	0x6fa87e4f,0xfe2ce6e0,0xa3014314,0x4e0811a1,
-	0xf7537e82,0xbd3af235,0x2ad7d2bb,0xeb86d391	);
-
-my @V=("%r8d","%r9d","%r10d","%r11d");	# MD5 registers
-my $tmp="%r12d";
-
-my @XX=("%rbp","%rsi");			# RC4 registers
-my @TX=("%rax","%rbx");
-my $YY="%rcx";
-my $TY="%rdx";
-
-my $MOD=32;				# 16, 32 or 64
-
-$code.=<<___;
-.text
-.align 16
-
-.globl	$func
-.type	$func,\@function,$nargs
-$func:
-	cmp	\$0,$len
-	je	.Labort
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	sub	\$40,%rsp
-.Lbody:
-___
-if ($rc4) {
-$code.=<<___;
-$D#md5#	mov	$ctx,%r11		# reassign arguments
-	mov	$len,%r12
-	mov	$in0,%r13
-	mov	$out,%r14
-$D#md5#	mov	$inp,%r15
-___
-    $ctx="%r11"	if ($md5);		# reassign arguments
-    $len="%r12";
-    $in0="%r13";
-    $out="%r14";
-    $inp="%r15"	if ($md5);
-    $inp=$in0	if (!$md5);
-$code.=<<___;
-	xor	$XX[0],$XX[0]
-	xor	$YY,$YY
-
-	lea	8($dat),$dat
-	mov	-8($dat),$XX[0]#b
-	mov	-4($dat),$YY#b
-
-	inc	$XX[0]#b
-	sub	$in0,$out
-	movl	($dat,$XX[0],4),$TX[0]#d
-___
-$code.=<<___ if (!$md5);
-	xor	$TX[1],$TX[1]
-	test	\$-128,$len
-	jz	.Loop1
-	sub	$XX[0],$TX[1]
-	and	\$`$MOD-1`,$TX[1]
-	jz	.Loop${MOD}_is_hot
-	sub	$TX[1],$len
-.Loop${MOD}_warmup:
-	add	$TX[0]#b,$YY#b
-	movl	($dat,$YY,4),$TY#d
-	movl	$TX[0]#d,($dat,$YY,4)
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TY#b,$TX[0]#b
-	inc	$XX[0]#b
-	movl	($dat,$TX[0],4),$TY#d
-	movl	($dat,$XX[0],4),$TX[0]#d
-	xorb	($in0),$TY#b
-	movb	$TY#b,($out,$in0)
-	lea	1($in0),$in0
-	dec	$TX[1]
-	jnz	.Loop${MOD}_warmup
-
-	mov	$YY,$TX[1]
-	xor	$YY,$YY
-	mov	$TX[1]#b,$YY#b
-
-.Loop${MOD}_is_hot:
-	mov	$len,32(%rsp)		# save original $len
-	shr	\$6,$len		# number of 64-byte blocks
-___
-  if ($D && !$md5) {			# stitch in dummy MD5
-    $md5=1;
-    $ctx="%r11";
-    $inp="%r15";
-    $code.=<<___;
-	mov	%rsp,$ctx
-	mov	$in0,$inp
-___
-  }
-}
-$code.=<<___;
-#rc4#	add	$TX[0]#b,$YY#b
-#rc4#	lea	($dat,$XX[0],4),$XX[1]
-	shl	\$6,$len
-	add	$inp,$len		# pointer to the end of input
-	mov	$len,16(%rsp)
-
-#md5#	mov	$ctx,24(%rsp)		# save pointer to MD5_CTX
-#md5#	mov	0*4($ctx),$V[0]		# load current hash value from MD5_CTX
-#md5#	mov	1*4($ctx),$V[1]
-#md5#	mov	2*4($ctx),$V[2]
-#md5#	mov	3*4($ctx),$V[3]
-	jmp	.Loop
-
-.align	16
-.Loop:
-#md5#	mov	$V[0],0*4(%rsp)		# put aside current hash value
-#md5#	mov	$V[1],1*4(%rsp)
-#md5#	mov	$V[2],2*4(%rsp)
-#md5#	mov	$V[3],$tmp		# forward reference
-#md5#	mov	$V[3],3*4(%rsp)
-___
-
-sub R0 {
-  my ($i,$a,$b,$c,$d)=@_;
-  my @rot0=(7,12,17,22);
-  my $j=$i%16;
-  my $k=$i%$MOD;
-  my $xmm="%xmm".($j&1);
-    $code.="	movdqu	($in0),%xmm2\n"		if ($rc4 && $j==15);
-    $code.="	add	\$$MOD,$XX[0]#b\n"	if ($rc4 && $j==15 && $k==$MOD-1);
-    $code.="	pxor	$xmm,$xmm\n"		if ($rc4 && $j<=1);
-    $code.=<<___;
-#rc4#	movl	($dat,$YY,4),$TY#d
-#md5#	xor	$c,$tmp
-#rc4#	movl	$TX[0]#d,($dat,$YY,4)
-#md5#	and	$b,$tmp
-#md5#	add	4*`$j`($inp),$a
-#rc4#	add	$TY#b,$TX[0]#b
-#rc4#	movl	`4*(($k+1)%$MOD)`(`$k==$MOD-1?"$dat,$XX[0],4":"$XX[1]"`),$TX[1]#d
-#md5#	add	\$$K[$i],$a
-#md5#	xor	$d,$tmp
-#rc4#	movz	$TX[0]#b,$TX[0]#d
-#rc4#	movl	$TY#d,4*$k($XX[1])
-#md5#	add	$tmp,$a
-#rc4#	add	$TX[1]#b,$YY#b
-#md5#	rol	\$$rot0[$j%4],$a
-#md5#	mov	`$j==15?"$b":"$c"`,$tmp		# forward reference
-#rc4#	pinsrw	\$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n
-#md5#	add	$b,$a
-___
-    $code.=<<___ if ($rc4 && $j==15 && $k==$MOD-1);
-	mov	$YY,$XX[1]
-	xor	$YY,$YY				# keyword to partial register
-	mov	$XX[1]#b,$YY#b
-	lea	($dat,$XX[0],4),$XX[1]
-___
-    $code.=<<___ if ($rc4 && $j==15);
-	psllq	\$8,%xmm1
-	pxor	%xmm0,%xmm2
-	pxor	%xmm1,%xmm2
-___
-}
-sub R1 {
-  my ($i,$a,$b,$c,$d)=@_;
-  my @rot1=(5,9,14,20);
-  my $j=$i%16;
-  my $k=$i%$MOD;
-  my $xmm="%xmm".($j&1);
-    $code.="	movdqu	16($in0),%xmm3\n"	if ($rc4 && $j==15);
-    $code.="	add	\$$MOD,$XX[0]#b\n"	if ($rc4 && $j==15 && $k==$MOD-1);
-    $code.="	pxor	$xmm,$xmm\n"		if ($rc4 && $j<=1);
-    $code.=<<___;
-#rc4#	movl	($dat,$YY,4),$TY#d
-#md5#	xor	$b,$tmp
-#rc4#	movl	$TX[0]#d,($dat,$YY,4)
-#md5#	and	$d,$tmp
-#md5#	add	4*`((1+5*$j)%16)`($inp),$a
-#rc4#	add	$TY#b,$TX[0]#b
-#rc4#	movl	`4*(($k+1)%$MOD)`(`$k==$MOD-1?"$dat,$XX[0],4":"$XX[1]"`),$TX[1]#d
-#md5#	add	\$$K[$i],$a
-#md5#	xor	$c,$tmp
-#rc4#	movz	$TX[0]#b,$TX[0]#d
-#rc4#	movl	$TY#d,4*$k($XX[1])
-#md5#	add	$tmp,$a
-#rc4#	add	$TX[1]#b,$YY#b
-#md5#	rol	\$$rot1[$j%4],$a
-#md5#	mov	`$j==15?"$c":"$b"`,$tmp		# forward reference
-#rc4#	pinsrw	\$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n
-#md5#	add	$b,$a
-___
-    $code.=<<___ if ($rc4 && $j==15 && $k==$MOD-1);
-	mov	$YY,$XX[1]
-	xor	$YY,$YY				# keyword to partial register
-	mov	$XX[1]#b,$YY#b
-	lea	($dat,$XX[0],4),$XX[1]
-___
-    $code.=<<___ if ($rc4 && $j==15);
-	psllq	\$8,%xmm1
-	pxor	%xmm0,%xmm3
-	pxor	%xmm1,%xmm3
-___
-}
-sub R2 {
-  my ($i,$a,$b,$c,$d)=@_;
-  my @rot2=(4,11,16,23);
-  my $j=$i%16;
-  my $k=$i%$MOD;
-  my $xmm="%xmm".($j&1);
-    $code.="	movdqu	32($in0),%xmm4\n"	if ($rc4 && $j==15);
-    $code.="	add	\$$MOD,$XX[0]#b\n"	if ($rc4 && $j==15 && $k==$MOD-1);
-    $code.="	pxor	$xmm,$xmm\n"		if ($rc4 && $j<=1);
-    $code.=<<___;
-#rc4#	movl	($dat,$YY,4),$TY#d
-#md5#	xor	$c,$tmp
-#rc4#	movl	$TX[0]#d,($dat,$YY,4)
-#md5#	xor	$b,$tmp
-#md5#	add	4*`((5+3*$j)%16)`($inp),$a
-#rc4#	add	$TY#b,$TX[0]#b
-#rc4#	movl	`4*(($k+1)%$MOD)`(`$k==$MOD-1?"$dat,$XX[0],4":"$XX[1]"`),$TX[1]#d
-#md5#	add	\$$K[$i],$a
-#rc4#	movz	$TX[0]#b,$TX[0]#d
-#md5#	add	$tmp,$a
-#rc4#	movl	$TY#d,4*$k($XX[1])
-#rc4#	add	$TX[1]#b,$YY#b
-#md5#	rol	\$$rot2[$j%4],$a
-#md5#	mov	`$j==15?"\\\$-1":"$c"`,$tmp	# forward reference
-#rc4#	pinsrw	\$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n
-#md5#	add	$b,$a
-___
-    $code.=<<___ if ($rc4 && $j==15 && $k==$MOD-1);
-	mov	$YY,$XX[1]
-	xor	$YY,$YY				# keyword to partial register
-	mov	$XX[1]#b,$YY#b
-	lea	($dat,$XX[0],4),$XX[1]
-___
-    $code.=<<___ if ($rc4 && $j==15);
-	psllq	\$8,%xmm1
-	pxor	%xmm0,%xmm4
-	pxor	%xmm1,%xmm4
-___
-}
-sub R3 {
-  my ($i,$a,$b,$c,$d)=@_;
-  my @rot3=(6,10,15,21);
-  my $j=$i%16;
-  my $k=$i%$MOD;
-  my $xmm="%xmm".($j&1);
-    $code.="	movdqu	48($in0),%xmm5\n"	if ($rc4 && $j==15);
-    $code.="	add	\$$MOD,$XX[0]#b\n"	if ($rc4 && $j==15 && $k==$MOD-1);
-    $code.="	pxor	$xmm,$xmm\n"		if ($rc4 && $j<=1);
-    $code.=<<___;
-#rc4#	movl	($dat,$YY,4),$TY#d
-#md5#	xor	$d,$tmp
-#rc4#	movl	$TX[0]#d,($dat,$YY,4)
-#md5#	or	$b,$tmp
-#md5#	add	4*`((7*$j)%16)`($inp),$a
-#rc4#	add	$TY#b,$TX[0]#b
-#rc4#	movl	`4*(($k+1)%$MOD)`(`$k==$MOD-1?"$dat,$XX[0],4":"$XX[1]"`),$TX[1]#d
-#md5#	add	\$$K[$i],$a
-#rc4#	movz	$TX[0]#b,$TX[0]#d
-#md5#	xor	$c,$tmp
-#rc4#	movl	$TY#d,4*$k($XX[1])
-#md5#	add	$tmp,$a
-#rc4#	add	$TX[1]#b,$YY#b
-#md5#	rol	\$$rot3[$j%4],$a
-#md5#	mov	\$-1,$tmp			# forward reference
-#rc4#	pinsrw	\$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n
-#md5#	add	$b,$a
-___
-    $code.=<<___ if ($rc4 && $j==15);
-	mov	$XX[0],$XX[1]
-	xor	$XX[0],$XX[0]			# keyword to partial register
-	mov	$XX[1]#b,$XX[0]#b
-	mov	$YY,$XX[1]
-	xor	$YY,$YY				# keyword to partial register
-	mov	$XX[1]#b,$YY#b
-	lea	($dat,$XX[0],4),$XX[1]
-	psllq	\$8,%xmm1
-	pxor	%xmm0,%xmm5
-	pxor	%xmm1,%xmm5
-___
-}
-
-my $i=0;
-for(;$i<16;$i++) { R0($i,@V); unshift(@V,pop(@V)); push(@TX,shift(@TX)); }
-for(;$i<32;$i++) { R1($i,@V); unshift(@V,pop(@V)); push(@TX,shift(@TX)); }
-for(;$i<48;$i++) { R2($i,@V); unshift(@V,pop(@V)); push(@TX,shift(@TX)); }
-for(;$i<64;$i++) { R3($i,@V); unshift(@V,pop(@V)); push(@TX,shift(@TX)); }
-
-$code.=<<___;
-#md5#	add	0*4(%rsp),$V[0]		# accumulate hash value
-#md5#	add	1*4(%rsp),$V[1]
-#md5#	add	2*4(%rsp),$V[2]
-#md5#	add	3*4(%rsp),$V[3]
-
-#rc4#	movdqu	%xmm2,($out,$in0)	# write RC4 output
-#rc4#	movdqu	%xmm3,16($out,$in0)
-#rc4#	movdqu	%xmm4,32($out,$in0)
-#rc4#	movdqu	%xmm5,48($out,$in0)
-#md5#	lea	64($inp),$inp
-#rc4#	lea	64($in0),$in0
-	cmp	16(%rsp),$inp		# are we done?
-	jb	.Loop
-
-#md5#	mov	24(%rsp),$len		# restore pointer to MD5_CTX
-#rc4#	sub	$TX[0]#b,$YY#b		# correct $YY
-#md5#	mov	$V[0],0*4($len)		# write MD5_CTX
-#md5#	mov	$V[1],1*4($len)
-#md5#	mov	$V[2],2*4($len)
-#md5#	mov	$V[3],3*4($len)
-___
-$code.=<<___ if ($rc4 && (!$md5 || $D));
-	mov	32(%rsp),$len		# restore original $len
-	and	\$63,$len		# remaining bytes
-	jnz	.Loop1
-	jmp	.Ldone
-	
-.align	16
-.Loop1:
-	add	$TX[0]#b,$YY#b
-	movl	($dat,$YY,4),$TY#d
-	movl	$TX[0]#d,($dat,$YY,4)
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TY#b,$TX[0]#b
-	inc	$XX[0]#b
-	movl	($dat,$TX[0],4),$TY#d
-	movl	($dat,$XX[0],4),$TX[0]#d
-	xorb	($in0),$TY#b
-	movb	$TY#b,($out,$in0)
-	lea	1($in0),$in0
-	dec	$len
-	jnz	.Loop1
-
-.Ldone:
-___
-$code.=<<___;
-#rc4#	sub	\$1,$XX[0]#b
-#rc4#	movl	$XX[0]#d,-8($dat)
-#rc4#	movl	$YY#d,-4($dat)
-
-	mov	40(%rsp),%r15
-	mov	48(%rsp),%r14
-	mov	56(%rsp),%r13
-	mov	64(%rsp),%r12
-	mov	72(%rsp),%rbp
-	mov	80(%rsp),%rbx
-	lea	88(%rsp),%rsp
-.Lepilogue:
-.Labort:
-	ret
-.size $func,.-$func
-___
-
-if ($rc4 && $D) {	# sole purpose of this section is to provide
-			# option to use the generated module as drop-in
-			# replacement for rc4-x86_64.pl for debugging
-			# and testing purposes...
-my ($idx,$ido)=("%r8","%r9");
-my ($dat,$len,$inp)=("%rdi","%rsi","%rdx");
-
-$code.=<<___;
-.globl	RC4_set_key
-.type	RC4_set_key,\@function,3
-.align	16
-RC4_set_key:
-	lea	8($dat),$dat
-	lea	($inp,$len),$inp
-	neg	$len
-	mov	$len,%rcx
-	xor	%eax,%eax
-	xor	$ido,$ido
-	xor	%r10,%r10
-	xor	%r11,%r11
-	jmp	.Lw1stloop
-
-.align	16
-.Lw1stloop:
-	mov	%eax,($dat,%rax,4)
-	add	\$1,%al
-	jnc	.Lw1stloop
-
-	xor	$ido,$ido
-	xor	$idx,$idx
-.align	16
-.Lw2ndloop:
-	mov	($dat,$ido,4),%r10d
-	add	($inp,$len,1),$idx#b
-	add	%r10b,$idx#b
-	add	\$1,$len
-	mov	($dat,$idx,4),%r11d
-	cmovz	%rcx,$len
-	mov	%r10d,($dat,$idx,4)
-	mov	%r11d,($dat,$ido,4)
-	add	\$1,$ido#b
-	jnc	.Lw2ndloop
-
-	xor	%eax,%eax
-	mov	%eax,-8($dat)
-	mov	%eax,-4($dat)
-	ret
-.size	RC4_set_key,.-RC4_set_key
-
-.globl	RC4_options
-.type	RC4_options,\@abi-omnipotent
-.align	16
-RC4_options:
-	lea	.Lopts(%rip),%rax
-	ret
-.align	64
-.Lopts:
-.asciz	"rc4(64x,int)"
-.align	64
-.size	RC4_options,.-RC4_options
-___
-}
-# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
-#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
-if ($win64) {
-my $rec="%rcx";
-my $frame="%rdx";
-my $context="%r8";
-my $disp="%r9";
-
-$code.=<<___;
-.extern	__imp_RtlVirtualUnwind
-.type	se_handler,\@abi-omnipotent
-.align	16
-se_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	120($context),%rax	# pull context->Rax
-	mov	248($context),%rbx	# pull context->Rip
-
-	lea	.Lbody(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip<.Lbody
-	jb	.Lin_prologue
-
-	mov	152($context),%rax	# pull context->Rsp
-
-	lea	.Lepilogue(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip>=.Lepilogue
-	jae	.Lin_prologue
-
-	mov	40(%rax),%r15
-	mov	48(%rax),%r14
-	mov	56(%rax),%r13
-	mov	64(%rax),%r12
-	mov	72(%rax),%rbp
-	mov	80(%rax),%rbx
-	lea	88(%rax),%rax
-
-	mov	%rbx,144($context)	# restore context->Rbx
-	mov	%rbp,160($context)	# restore context->Rbp
-	mov	%r12,216($context)	# restore context->R12
-	mov	%r13,224($context)	# restore context->R12
-	mov	%r14,232($context)	# restore context->R14
-	mov	%r15,240($context)	# restore context->R15
-
-.Lin_prologue:
-	mov	8(%rax),%rdi
-	mov	16(%rax),%rsi
-	mov	%rax,152($context)	# restore context->Rsp
-	mov	%rsi,168($context)	# restore context->Rsi
-	mov	%rdi,176($context)	# restore context->Rdi
-
-	mov	40($disp),%rdi		# disp->ContextRecord
-	mov	$context,%rsi		# context
-	mov	\$154,%ecx		# sizeof(CONTEXT)
-	.long	0xa548f3fc		# cld; rep movsq
-
-	mov	$disp,%rsi
-	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
-	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
-	mov	0(%rsi),%r8		# arg3, disp->ControlPc
-	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
-	mov	40(%rsi),%r10		# disp->ContextRecord
-	lea	56(%rsi),%r11		# &disp->HandlerData
-	lea	24(%rsi),%r12		# &disp->EstablisherFrame
-	mov	%r10,32(%rsp)		# arg5
-	mov	%r11,40(%rsp)		# arg6
-	mov	%r12,48(%rsp)		# arg7
-	mov	%rcx,56(%rsp)		# arg8, (NULL)
-	call	*__imp_RtlVirtualUnwind(%rip)
-
-	mov	\$1,%eax		# ExceptionContinueSearch
-	add	\$64,%rsp
-	popfq
-	pop	%r15
-	pop	%r14
-	pop	%r13
-	pop	%r12
-	pop	%rbp
-	pop	%rbx
-	pop	%rdi
-	pop	%rsi
-	ret
-.size	se_handler,.-se_handler
-
-.section	.pdata
-.align	4
-	.rva	.LSEH_begin_$func
-	.rva	.LSEH_end_$func
-	.rva	.LSEH_info_$func
-
-.section	.xdata
-.align	8
-.LSEH_info_$func:
-	.byte	9,0,0,0
-	.rva	se_handler
-___
-}
-
-sub reg_part {
-my ($reg,$conv)=@_;
-    if ($reg =~ /%r[0-9]+/)     { $reg .= $conv; }
-    elsif ($conv eq "b")        { $reg =~ s/%[er]([^x]+)x?/%$1l/;       }
-    elsif ($conv eq "w")        { $reg =~ s/%[er](.+)/%$1/;             }
-    elsif ($conv eq "d")        { $reg =~ s/%[er](.+)/%e$1/;            }
-    return $reg;
-}
-
-$code =~ s/(%[a-z0-9]+)#([bwd])/reg_part($1,$2)/gem;
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-$code =~ s/pinsrw\s+\$0,/movd	/gm;
-
-$code =~ s/#md5#//gm	if ($md5);
-$code =~ s/#rc4#//gm	if ($rc4);
-
-print $code;
-
-close STDOUT;
diff --git a/drivers/builtin_openssl/crypto/rc4/asm/rc4-parisc.pl b/drivers/builtin_openssl/crypto/rc4/asm/rc4-parisc.pl
deleted file mode 100644
index ad7e65651c..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/asm/rc4-parisc.pl
+++ /dev/null
@@ -1,314 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# RC4 for PA-RISC.
-
-# June 2009.
-#
-# Performance is 33% better than gcc 3.2 generated code on PA-7100LC.
-# For reference, [4x] unrolled loop is >40% faster than folded one.
-# It's possible to unroll loop 8 times on PA-RISC 2.0, but improvement
-# is believed to be not sufficient to justify the effort...
-#
-# Special thanks to polarhome.com for providing HP-UX account.
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-
-$flavour = shift;
-$output = shift;
-open STDOUT,">$output";
-
-if ($flavour =~ /64/) {
-	$LEVEL		="2.0W";
-	$SIZE_T		=8;
-	$FRAME_MARKER	=80;
-	$SAVED_RP	=16;
-	$PUSH		="std";
-	$PUSHMA		="std,ma";
-	$POP		="ldd";
-	$POPMB		="ldd,mb";
-} else {
-	$LEVEL		="1.0";
-	$SIZE_T		=4;
-	$FRAME_MARKER	=48;
-	$SAVED_RP	=20;
-	$PUSH		="stw";
-	$PUSHMA		="stwm";
-	$POP		="ldw";
-	$POPMB		="ldwm";
-}
-
-$FRAME=4*$SIZE_T+$FRAME_MARKER;	# 4 saved regs + frame marker
-				#                [+ argument transfer]
-$SZ=1;				# defaults to RC4_CHAR
-if (open CONF,"<${dir}../../opensslconf.h") {
-    while(<CONF>) {
-	if (m/#\s*define\s+RC4_INT\s+(.*)/) {
-	    $SZ = ($1=~/char$/) ? 1 : 4;
-	    last;
-	}
-    }
-    close CONF;
-}
-
-if ($SZ==1) {	# RC4_CHAR
-    $LD="ldb";
-    $LDX="ldbx";
-    $MKX="addl";
-    $ST="stb";
-} else {	# RC4_INT (~5% faster than RC4_CHAR on PA-7100LC)
-    $LD="ldw";
-    $LDX="ldwx,s";
-    $MKX="sh2addl";
-    $ST="stw";
-}
-
-$key="%r26";
-$len="%r25";
-$inp="%r24";
-$out="%r23";
-
-@XX=("%r19","%r20");
-@TX=("%r21","%r22");
-$YY="%r28";
-$TY="%r29";
-
-$acc="%r1";
-$ix="%r2";
-$iy="%r3";
-$dat0="%r4";
-$dat1="%r5";
-$rem="%r6";
-$mask="%r31";
-
-sub unrolledloopbody {
-for ($i=0;$i<4;$i++) {
-$code.=<<___;
-	ldo	1($XX[0]),$XX[1]
-	`sprintf("$LDX	%$TY(%$key),%$dat1") if ($i>0)`	
-	and	$mask,$XX[1],$XX[1]
-	$LDX	$YY($key),$TY
-	$MKX	$YY,$key,$ix
-	$LDX	$XX[1]($key),$TX[1]
-	$MKX	$XX[0],$key,$iy
-	$ST	$TX[0],0($ix)
-	comclr,<> $XX[1],$YY,%r0	; conditional
-	copy	$TX[0],$TX[1]		; move
-	`sprintf("%sdep	%$dat1,%d,8,%$acc",$i==1?"z":"",8*($i-1)+7) if ($i>0)`
-	$ST	$TY,0($iy)
-	addl	$TX[0],$TY,$TY
-	addl	$TX[1],$YY,$YY
-	and	$mask,$TY,$TY
-	and	$mask,$YY,$YY
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-} }
-
-sub foldedloop {
-my ($label,$count)=@_;
-$code.=<<___;
-$label
-	$MKX	$YY,$key,$iy
-	$LDX	$YY($key),$TY
-	$MKX	$XX[0],$key,$ix
-	$ST	$TX[0],0($iy)
-	ldo	1($XX[0]),$XX[0]
-	$ST	$TY,0($ix)
-	addl	$TX[0],$TY,$TY
-	ldbx	$inp($out),$dat1
-	and	$mask,$TY,$TY
-	and	$mask,$XX[0],$XX[0]
-	$LDX	$TY($key),$acc
-	$LDX	$XX[0]($key),$TX[0]
-	ldo	1($out),$out
-	xor	$dat1,$acc,$acc
-	addl	$TX[0],$YY,$YY
-	stb	$acc,-1($out)
-	addib,<> -1,$count,$label	; $count is always small
-	and	$mask,$YY,$YY
-___
-}
-
-$code=<<___;
-	.LEVEL	$LEVEL
-	.SPACE	\$TEXT\$
-	.SUBSPA	\$CODE\$,QUAD=0,ALIGN=8,ACCESS=0x2C,CODE_ONLY
-
-	.EXPORT	RC4,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR
-RC4
-	.PROC
-	.CALLINFO	FRAME=`$FRAME-4*$SIZE_T`,NO_CALLS,SAVE_RP,ENTRY_GR=6
-	.ENTRY
-	$PUSH	%r2,-$SAVED_RP(%sp)	; standard prologue
-	$PUSHMA	%r3,$FRAME(%sp)
-	$PUSH	%r4,`-$FRAME+1*$SIZE_T`(%sp)
-	$PUSH	%r5,`-$FRAME+2*$SIZE_T`(%sp)
-	$PUSH	%r6,`-$FRAME+3*$SIZE_T`(%sp)
-
-	cmpib,*= 0,$len,L\$abort
-	sub	$inp,$out,$inp		; distance between $inp and $out
-
-	$LD	`0*$SZ`($key),$XX[0]
-	$LD	`1*$SZ`($key),$YY
-	ldo	`2*$SZ`($key),$key
-
-	ldi	0xff,$mask
-	ldi	3,$dat0		
-
-	ldo	1($XX[0]),$XX[0]	; warm up loop
-	and	$mask,$XX[0],$XX[0]
-	$LDX	$XX[0]($key),$TX[0]
-	addl	$TX[0],$YY,$YY
-	cmpib,*>>= 6,$len,L\$oop1	; is $len large enough to bother?
-	and	$mask,$YY,$YY
-
-	and,<>	$out,$dat0,$rem		; is $out aligned?
-	b	L\$alignedout
-	subi	4,$rem,$rem
-	sub	$len,$rem,$len
-___
-&foldedloop("L\$alignout",$rem);	# process till $out is aligned
-
-$code.=<<___;
-L\$alignedout				; $len is at least 4 here
-	and,<>	$inp,$dat0,$acc		; is $inp aligned?
-	b	L\$oop4
-	sub	$inp,$acc,$rem		; align $inp
-
-	sh3addl	$acc,%r0,$acc
-	subi	32,$acc,$acc
-	mtctl	$acc,%cr11		; load %sar with vshd align factor
-	ldwx	$rem($out),$dat0
-	ldo	4($rem),$rem
-L\$oop4misalignedinp
-___
-&unrolledloopbody();
-$code.=<<___;
-	$LDX	$TY($key),$ix
-	ldwx	$rem($out),$dat1
-	ldo	-4($len),$len
-	or	$ix,$acc,$acc		; last piece, no need to dep
-	vshd	$dat0,$dat1,$iy		; align data
-	copy	$dat1,$dat0
-	xor	$iy,$acc,$acc
-	stw	$acc,0($out)
-	cmpib,*<< 3,$len,L\$oop4misalignedinp
-	ldo	4($out),$out
-	cmpib,*= 0,$len,L\$done
-	nop
-	b	L\$oop1
-	nop
-
-	.ALIGN	8
-L\$oop4
-___
-&unrolledloopbody();
-$code.=<<___;
-	$LDX	$TY($key),$ix
-	ldwx	$inp($out),$dat0
-	ldo	-4($len),$len
-	or	$ix,$acc,$acc		; last piece, no need to dep
-	xor	$dat0,$acc,$acc
-	stw	$acc,0($out)
-	cmpib,*<< 3,$len,L\$oop4
-	ldo	4($out),$out
-	cmpib,*= 0,$len,L\$done
-	nop
-___
-&foldedloop("L\$oop1",$len);
-$code.=<<___;
-L\$done
-	$POP	`-$FRAME-$SAVED_RP`(%sp),%r2
-	ldo	-1($XX[0]),$XX[0]	; chill out loop
-	sub	$YY,$TX[0],$YY
-	and	$mask,$XX[0],$XX[0]
-	and	$mask,$YY,$YY
-	$ST	$XX[0],`-2*$SZ`($key)
-	$ST	$YY,`-1*$SZ`($key)
-	$POP	`-$FRAME+1*$SIZE_T`(%sp),%r4
-	$POP	`-$FRAME+2*$SIZE_T`(%sp),%r5
-	$POP	`-$FRAME+3*$SIZE_T`(%sp),%r6
-L\$abort
-	bv	(%r2)
-	.EXIT
-	$POPMB	-$FRAME(%sp),%r3
-	.PROCEND
-___
-
-$code.=<<___;
-
-	.EXPORT	private_RC4_set_key,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR
-	.ALIGN	8
-private_RC4_set_key
-	.PROC
-	.CALLINFO	NO_CALLS
-	.ENTRY
-	$ST	%r0,`0*$SZ`($key)
-	$ST	%r0,`1*$SZ`($key)
-	ldo	`2*$SZ`($key),$key
-	copy	%r0,@XX[0]
-L\$1st
-	$ST	@XX[0],0($key)
-	ldo	1(@XX[0]),@XX[0]
-	bb,>=	@XX[0],`31-8`,L\$1st	; @XX[0]<256
-	ldo	$SZ($key),$key
-
-	ldo	`-256*$SZ`($key),$key	; rewind $key
-	addl	$len,$inp,$inp		; $inp to point at the end
-	sub	%r0,$len,%r23		; inverse index
-	copy	%r0,@XX[0]
-	copy	%r0,@XX[1]
-	ldi	0xff,$mask
-
-L\$2nd
-	$LDX	@XX[0]($key),@TX[0]
-	ldbx	%r23($inp),@TX[1]
-	addi,nuv 1,%r23,%r23		; increment and conditional
-	sub	%r0,$len,%r23		; inverse index
-	addl	@TX[0],@XX[1],@XX[1]
-	addl	@TX[1],@XX[1],@XX[1]
-	and	$mask,@XX[1],@XX[1]
-	$MKX	@XX[0],$key,$TY
-	$LDX	@XX[1]($key),@TX[1]
-	$MKX	@XX[1],$key,$YY
-	ldo	1(@XX[0]),@XX[0]
-	$ST	@TX[0],0($YY)
-	bb,>=	@XX[0],`31-8`,L\$2nd	; @XX[0]<256
-	$ST	@TX[1],0($TY)
-
-	bv,n	(%r2)
-	.EXIT
-	nop
-	.PROCEND
-
-	.EXPORT	RC4_options,ENTRY
-	.ALIGN	8
-RC4_options
-	.PROC
-	.CALLINFO	NO_CALLS
-	.ENTRY
-	blr	%r0,%r28
-	ldi	3,%r1
-L\$pic
-	andcm	%r28,%r1,%r28
-	bv	(%r2)
-	.EXIT
-	ldo	L\$opts-L\$pic(%r28),%r28
-	.PROCEND
-	.ALIGN	8
-L\$opts
-	.STRINGZ "rc4(4x,`$SZ==1?"char":"int"`)"
-	.STRINGZ "RC4 for PA-RISC, CRYPTOGAMS by <appro\@openssl.org>"
-___
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-$code =~ s/cmpib,\*/comib,/gm	if ($SIZE_T==4);
-$code =~ s/\bbv\b/bve/gm	if ($SIZE_T==8);
-
-print $code;
-close STDOUT;
diff --git a/drivers/builtin_openssl/crypto/rc4/asm/rc4-s390x.pl b/drivers/builtin_openssl/crypto/rc4/asm/rc4-s390x.pl
deleted file mode 100644
index 7528ece13c..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/asm/rc4-s390x.pl
+++ /dev/null
@@ -1,234 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# February 2009
-#
-# Performance is 2x of gcc 3.4.6 on z10. Coding "secret" is to
-# "cluster" Address Generation Interlocks, so that one pipeline stall
-# resolves several dependencies.
-
-# November 2010.
-#
-# Adapt for -m31 build. If kernel supports what's called "highgprs"
-# feature on Linux [see /proc/cpuinfo], it's possible to use 64-bit
-# instructions and achieve "64-bit" performance even in 31-bit legacy
-# application context. The feature is not specific to any particular
-# processor, as long as it's "z-CPU". Latter implies that the code
-# remains z/Architecture specific. On z990 it was measured to perform
-# 50% better than code generated by gcc 4.3.
-
-$flavour = shift;
-
-if ($flavour =~ /3[12]/) {
-	$SIZE_T=4;
-	$g="";
-} else {
-	$SIZE_T=8;
-	$g="g";
-}
-
-while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
-
-$rp="%r14";
-$sp="%r15";
-$code=<<___;
-.text
-
-___
-
-# void RC4(RC4_KEY *key,size_t len,const void *inp,void *out)
-{
-$acc="%r0";
-$cnt="%r1";
-$key="%r2";
-$len="%r3";
-$inp="%r4";
-$out="%r5";
-
-@XX=("%r6","%r7");
-@TX=("%r8","%r9");
-$YY="%r10";
-$TY="%r11";
-
-$code.=<<___;
-.globl	RC4
-.type	RC4,\@function
-.align	64
-RC4:
-	stm${g}	%r6,%r11,6*$SIZE_T($sp)
-___
-$code.=<<___ if ($flavour =~ /3[12]/);
-	llgfr	$len,$len
-___
-$code.=<<___;
-	llgc	$XX[0],0($key)
-	llgc	$YY,1($key)
-	la	$XX[0],1($XX[0])
-	nill	$XX[0],0xff
-	srlg	$cnt,$len,3
-	ltgr	$cnt,$cnt
-	llgc	$TX[0],2($XX[0],$key)
-	jz	.Lshort
-	j	.Loop8
-
-.align	64
-.Loop8:
-___
-for ($i=0;$i<8;$i++) {
-$code.=<<___;
-	la	$YY,0($YY,$TX[0])	# $i
-	nill	$YY,255
-	la	$XX[1],1($XX[0])
-	nill	$XX[1],255
-___
-$code.=<<___ if ($i==1);
-	llgc	$acc,2($TY,$key)
-___
-$code.=<<___ if ($i>1);
-	sllg	$acc,$acc,8
-	ic	$acc,2($TY,$key)
-___
-$code.=<<___;
-	llgc	$TY,2($YY,$key)
-	stc	$TX[0],2($YY,$key)
-	llgc	$TX[1],2($XX[1],$key)
-	stc	$TY,2($XX[0],$key)
-	cr	$XX[1],$YY
-	jne	.Lcmov$i
-	la	$TX[1],0($TX[0])
-.Lcmov$i:
-	la	$TY,0($TY,$TX[0])
-	nill	$TY,255
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));     # "rotate" registers
-}
-
-$code.=<<___;
-	lg	$TX[1],0($inp)
-	sllg	$acc,$acc,8
-	la	$inp,8($inp)
-	ic	$acc,2($TY,$key)
-	xgr	$acc,$TX[1]
-	stg	$acc,0($out)
-	la	$out,8($out)
-	brctg	$cnt,.Loop8
-
-.Lshort:
-	lghi	$acc,7
-	ngr	$len,$acc
-	jz	.Lexit
-	j	.Loop1
-
-.align	16
-.Loop1:
-	la	$YY,0($YY,$TX[0])
-	nill	$YY,255
-	llgc	$TY,2($YY,$key)
-	stc	$TX[0],2($YY,$key)
-	stc	$TY,2($XX[0],$key)
-	ar	$TY,$TX[0]
-	ahi	$XX[0],1
-	nill	$TY,255
-	nill	$XX[0],255
-	llgc	$acc,0($inp)
-	la	$inp,1($inp)
-	llgc	$TY,2($TY,$key)
-	llgc	$TX[0],2($XX[0],$key)
-	xr	$acc,$TY
-	stc	$acc,0($out)
-	la	$out,1($out)
-	brct	$len,.Loop1
-
-.Lexit:
-	ahi	$XX[0],-1
-	stc	$XX[0],0($key)
-	stc	$YY,1($key)
-	lm${g}	%r6,%r11,6*$SIZE_T($sp)
-	br	$rp
-.size	RC4,.-RC4
-.string	"RC4 for s390x, CRYPTOGAMS by <appro\@openssl.org>"
-
-___
-}
-
-# void RC4_set_key(RC4_KEY *key,unsigned int len,const void *inp)
-{
-$cnt="%r0";
-$idx="%r1";
-$key="%r2";
-$len="%r3";
-$inp="%r4";
-$acc="%r5";
-$dat="%r6";
-$ikey="%r7";
-$iinp="%r8";
-
-$code.=<<___;
-.globl	private_RC4_set_key
-.type	private_RC4_set_key,\@function
-.align	64
-private_RC4_set_key:
-	stm${g}	%r6,%r8,6*$SIZE_T($sp)
-	lhi	$cnt,256
-	la	$idx,0(%r0)
-	sth	$idx,0($key)
-.align	4
-.L1stloop:
-	stc	$idx,2($idx,$key)
-	la	$idx,1($idx)
-	brct	$cnt,.L1stloop
-
-	lghi	$ikey,-256
-	lr	$cnt,$len
-	la	$iinp,0(%r0)
-	la	$idx,0(%r0)
-.align	16
-.L2ndloop:
-	llgc	$acc,2+256($ikey,$key)
-	llgc	$dat,0($iinp,$inp)
-	la	$idx,0($idx,$acc)
-	la	$ikey,1($ikey)
-	la	$idx,0($idx,$dat)
-	nill	$idx,255
-	la	$iinp,1($iinp)
-	tml	$ikey,255
-	llgc	$dat,2($idx,$key)
-	stc	$dat,2+256-1($ikey,$key)
-	stc	$acc,2($idx,$key)
-	jz	.Ldone
-	brct	$cnt,.L2ndloop
-	lr	$cnt,$len
-	la	$iinp,0(%r0)
-	j	.L2ndloop
-.Ldone:
-	lm${g}	%r6,%r8,6*$SIZE_T($sp)
-	br	$rp
-.size	private_RC4_set_key,.-private_RC4_set_key
-
-___
-}
-
-# const char *RC4_options()
-$code.=<<___;
-.globl	RC4_options
-.type	RC4_options,\@function
-.align	16
-RC4_options:
-	larl	%r2,.Loptions
-	br	%r14
-.size	RC4_options,.-RC4_options
-.section	.rodata
-.Loptions:
-.align	8
-.string	"rc4(8x,char)"
-___
-
-print $code;
-close STDOUT;	# force flush
diff --git a/drivers/builtin_openssl/crypto/rc4/asm/rc4-x86_64.pl b/drivers/builtin_openssl/crypto/rc4/asm/rc4-x86_64.pl
deleted file mode 100755
index 75750dbf33..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/asm/rc4-x86_64.pl
+++ /dev/null
@@ -1,677 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# July 2004
-#
-# 2.22x RC4 tune-up:-) It should be noted though that my hand [as in
-# "hand-coded assembler"] doesn't stand for the whole improvement
-# coefficient. It turned out that eliminating RC4_CHAR from config
-# line results in ~40% improvement (yes, even for C implementation).
-# Presumably it has everything to do with AMD cache architecture and
-# RAW or whatever penalties. Once again! The module *requires* config
-# line *without* RC4_CHAR! As for coding "secret," I bet on partial
-# register arithmetics. For example instead of 'inc %r8; and $255,%r8'
-# I simply 'inc %r8b'. Even though optimization manual discourages
-# to operate on partial registers, it turned out to be the best bet.
-# At least for AMD... How IA32E would perform remains to be seen...
-
-# November 2004
-#
-# As was shown by Marc Bevand reordering of couple of load operations
-# results in even higher performance gain of 3.3x:-) At least on
-# Opteron... For reference, 1x in this case is RC4_CHAR C-code
-# compiled with gcc 3.3.2, which performs at ~54MBps per 1GHz clock.
-# Latter means that if you want to *estimate* what to expect from
-# *your* Opteron, then multiply 54 by 3.3 and clock frequency in GHz.
-
-# November 2004
-#
-# Intel P4 EM64T core was found to run the AMD64 code really slow...
-# The only way to achieve comparable performance on P4 was to keep
-# RC4_CHAR. Kind of ironic, huh? As it's apparently impossible to
-# compose blended code, which would perform even within 30% marginal
-# on either AMD and Intel platforms, I implement both cases. See
-# rc4_skey.c for further details...
-
-# April 2005
-#
-# P4 EM64T core appears to be "allergic" to 64-bit inc/dec. Replacing 
-# those with add/sub results in 50% performance improvement of folded
-# loop...
-
-# May 2005
-#
-# As was shown by Zou Nanhai loop unrolling can improve Intel EM64T
-# performance by >30% [unlike P4 32-bit case that is]. But this is
-# provided that loads are reordered even more aggressively! Both code
-# pathes, AMD64 and EM64T, reorder loads in essentially same manner
-# as my IA-64 implementation. On Opteron this resulted in modest 5%
-# improvement [I had to test it], while final Intel P4 performance
-# achieves respectful 432MBps on 2.8GHz processor now. For reference.
-# If executed on Xeon, current RC4_CHAR code-path is 2.7x faster than
-# RC4_INT code-path. While if executed on Opteron, it's only 25%
-# slower than the RC4_INT one [meaning that if CPU µ-arch detection
-# is not implemented, then this final RC4_CHAR code-path should be
-# preferred, as it provides better *all-round* performance].
-
-# March 2007
-#
-# Intel Core2 was observed to perform poorly on both code paths:-( It
-# apparently suffers from some kind of partial register stall, which
-# occurs in 64-bit mode only [as virtually identical 32-bit loop was
-# observed to outperform 64-bit one by almost 50%]. Adding two movzb to
-# cloop1 boosts its performance by 80%! This loop appears to be optimal
-# fit for Core2 and therefore the code was modified to skip cloop8 on
-# this CPU.
-
-# May 2010
-#
-# Intel Westmere was observed to perform suboptimally. Adding yet
-# another movzb to cloop1 improved performance by almost 50%! Core2
-# performance is improved too, but nominally...
-
-# May 2011
-#
-# The only code path that was not modified is P4-specific one. Non-P4
-# Intel code path optimization is heavily based on submission by Maxim
-# Perminov, Maxim Locktyukhin and Jim Guilford of Intel. I've used
-# some of the ideas even in attempt to optmize the original RC4_INT
-# code path... Current performance in cycles per processed byte (less
-# is better) and improvement coefficients relative to previous
-# version of this module are:
-#
-# Opteron	5.3/+0%(*)
-# P4		6.5
-# Core2		6.2/+15%(**)
-# Westmere	4.2/+60%
-# Sandy Bridge	4.2/+120%
-# Atom		9.3/+80%
-#
-# (*)	But corresponding loop has less instructions, which should have
-#	positive effect on upcoming Bulldozer, which has one less ALU.
-#	For reference, Intel code runs at 6.8 cpb rate on Opteron.
-# (**)	Note that Core2 result is ~15% lower than corresponding result
-#	for 32-bit code, meaning that it's possible to improve it,
-#	but more than likely at the cost of the others (see rc4-586.pl
-#	to get the idea)...
-
-$flavour = shift;
-$output  = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
-
-$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
-( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
-die "can't locate x86_64-xlate.pl";
-
-open OUT,"| \"$^X\" $xlate $flavour $output";
-*STDOUT=*OUT;
-
-$dat="%rdi";	    # arg1
-$len="%rsi";	    # arg2
-$inp="%rdx";	    # arg3
-$out="%rcx";	    # arg4
-
-{
-$code=<<___;
-.text
-.extern	OPENSSL_ia32cap_P
-
-.globl	RC4
-.type	RC4,\@function,4
-.align	16
-RC4:	or	$len,$len
-	jne	.Lentry
-	ret
-.Lentry:
-	push	%rbx
-	push	%r12
-	push	%r13
-.Lprologue:
-	mov	$len,%r11
-	mov	$inp,%r12
-	mov	$out,%r13
-___
-my $len="%r11";		# reassign input arguments
-my $inp="%r12";
-my $out="%r13";
-
-my @XX=("%r10","%rsi");
-my @TX=("%rax","%rbx");
-my $YY="%rcx";
-my $TY="%rdx";
-
-$code.=<<___;
-	xor	$XX[0],$XX[0]
-	xor	$YY,$YY
-
-	lea	8($dat),$dat
-	mov	-8($dat),$XX[0]#b
-	mov	-4($dat),$YY#b
-	cmpl	\$-1,256($dat)
-	je	.LRC4_CHAR
-	mov	OPENSSL_ia32cap_P(%rip),%r8d
-	xor	$TX[1],$TX[1]
-	inc	$XX[0]#b
-	sub	$XX[0],$TX[1]
-	sub	$inp,$out
-	movl	($dat,$XX[0],4),$TX[0]#d
-	test	\$-16,$len
-	jz	.Lloop1
-	bt	\$30,%r8d	# Intel CPU?
-	jc	.Lintel
-	and	\$7,$TX[1]
-	lea	1($XX[0]),$XX[1]
-	jz	.Loop8
-	sub	$TX[1],$len
-.Loop8_warmup:
-	add	$TX[0]#b,$YY#b
-	movl	($dat,$YY,4),$TY#d
-	movl	$TX[0]#d,($dat,$YY,4)
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TY#b,$TX[0]#b
-	inc	$XX[0]#b
-	movl	($dat,$TX[0],4),$TY#d
-	movl	($dat,$XX[0],4),$TX[0]#d
-	xorb	($inp),$TY#b
-	movb	$TY#b,($out,$inp)
-	lea	1($inp),$inp
-	dec	$TX[1]
-	jnz	.Loop8_warmup
-
-	lea	1($XX[0]),$XX[1]
-	jmp	.Loop8
-.align	16
-.Loop8:
-___
-for ($i=0;$i<8;$i++) {
-$code.=<<___ if ($i==7);
-	add	\$8,$XX[1]#b
-___
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	movl	($dat,$YY,4),$TY#d
-	movl	$TX[0]#d,($dat,$YY,4)
-	movl	`4*($i==7?-1:$i)`($dat,$XX[1],4),$TX[1]#d
-	ror	\$8,%r8				# ror is redundant when $i=0
-	movl	$TY#d,4*$i($dat,$XX[0],4)
-	add	$TX[0]#b,$TY#b
-	movb	($dat,$TY,4),%r8b
-___
-push(@TX,shift(@TX)); #push(@XX,shift(@XX));	# "rotate" registers
-}
-$code.=<<___;
-	add	\$8,$XX[0]#b
-	ror	\$8,%r8
-	sub	\$8,$len
-
-	xor	($inp),%r8
-	mov	%r8,($out,$inp)
-	lea	8($inp),$inp
-
-	test	\$-8,$len
-	jnz	.Loop8
-	cmp	\$0,$len
-	jne	.Lloop1
-	jmp	.Lexit
-
-.align	16
-.Lintel:
-	test	\$-32,$len
-	jz	.Lloop1
-	and	\$15,$TX[1]
-	jz	.Loop16_is_hot
-	sub	$TX[1],$len
-.Loop16_warmup:
-	add	$TX[0]#b,$YY#b
-	movl	($dat,$YY,4),$TY#d
-	movl	$TX[0]#d,($dat,$YY,4)
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TY#b,$TX[0]#b
-	inc	$XX[0]#b
-	movl	($dat,$TX[0],4),$TY#d
-	movl	($dat,$XX[0],4),$TX[0]#d
-	xorb	($inp),$TY#b
-	movb	$TY#b,($out,$inp)
-	lea	1($inp),$inp
-	dec	$TX[1]
-	jnz	.Loop16_warmup
-
-	mov	$YY,$TX[1]
-	xor	$YY,$YY
-	mov	$TX[1]#b,$YY#b
-
-.Loop16_is_hot:
-	lea	($dat,$XX[0],4),$XX[1]
-___
-sub RC4_loop {
-  my $i=shift;
-  my $j=$i<0?0:$i;
-  my $xmm="%xmm".($j&1);
-
-    $code.="	add	\$16,$XX[0]#b\n"		if ($i==15);
-    $code.="	movdqu	($inp),%xmm2\n"			if ($i==15);
-    $code.="	add	$TX[0]#b,$YY#b\n"		if ($i<=0);
-    $code.="	movl	($dat,$YY,4),$TY#d\n";
-    $code.="	pxor	%xmm0,%xmm2\n"			if ($i==0);
-    $code.="	psllq	\$8,%xmm1\n"			if ($i==0);
-    $code.="	pxor	$xmm,$xmm\n"			if ($i<=1);
-    $code.="	movl	$TX[0]#d,($dat,$YY,4)\n";
-    $code.="	add	$TY#b,$TX[0]#b\n";
-    $code.="	movl	`4*($j+1)`($XX[1]),$TX[1]#d\n"	if ($i<15);
-    $code.="	movz	$TX[0]#b,$TX[0]#d\n";
-    $code.="	movl	$TY#d,4*$j($XX[1])\n";
-    $code.="	pxor	%xmm1,%xmm2\n"			if ($i==0);
-    $code.="	lea	($dat,$XX[0],4),$XX[1]\n"	if ($i==15);
-    $code.="	add	$TX[1]#b,$YY#b\n"		if ($i<15);
-    $code.="	pinsrw	\$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n";
-    $code.="	movdqu	%xmm2,($out,$inp)\n"		if ($i==0);
-    $code.="	lea	16($inp),$inp\n"		if ($i==0);
-    $code.="	movl	($XX[1]),$TX[1]#d\n"		if ($i==15);
-}
-	RC4_loop(-1);
-$code.=<<___;
-	jmp	.Loop16_enter
-.align	16
-.Loop16:
-___
-
-for ($i=0;$i<16;$i++) {
-    $code.=".Loop16_enter:\n"		if ($i==1);
-	RC4_loop($i);
-	push(@TX,shift(@TX)); 		# "rotate" registers
-}
-$code.=<<___;
-	mov	$YY,$TX[1]
-	xor	$YY,$YY			# keyword to partial register
-	sub	\$16,$len
-	mov	$TX[1]#b,$YY#b
-	test	\$-16,$len
-	jnz	.Loop16
-
-	psllq	\$8,%xmm1
-	pxor	%xmm0,%xmm2
-	pxor	%xmm1,%xmm2
-	movdqu	%xmm2,($out,$inp)
-	lea	16($inp),$inp
-
-	cmp	\$0,$len
-	jne	.Lloop1
-	jmp	.Lexit
-
-.align	16
-.Lloop1:
-	add	$TX[0]#b,$YY#b
-	movl	($dat,$YY,4),$TY#d
-	movl	$TX[0]#d,($dat,$YY,4)
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TY#b,$TX[0]#b
-	inc	$XX[0]#b
-	movl	($dat,$TX[0],4),$TY#d
-	movl	($dat,$XX[0],4),$TX[0]#d
-	xorb	($inp),$TY#b
-	movb	$TY#b,($out,$inp)
-	lea	1($inp),$inp
-	dec	$len
-	jnz	.Lloop1
-	jmp	.Lexit
-
-.align	16
-.LRC4_CHAR:
-	add	\$1,$XX[0]#b
-	movzb	($dat,$XX[0]),$TX[0]#d
-	test	\$-8,$len
-	jz	.Lcloop1
-	jmp	.Lcloop8
-.align	16
-.Lcloop8:
-	mov	($inp),%r8d
-	mov	4($inp),%r9d
-___
-# unroll 2x4-wise, because 64-bit rotates kill Intel P4...
-for ($i=0;$i<4;$i++) {
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	lea	1($XX[0]),$XX[1]
-	movzb	($dat,$YY),$TY#d
-	movzb	$XX[1]#b,$XX[1]#d
-	movzb	($dat,$XX[1]),$TX[1]#d
-	movb	$TX[0]#b,($dat,$YY)
-	cmp	$XX[1],$YY
-	movb	$TY#b,($dat,$XX[0])
-	jne	.Lcmov$i			# Intel cmov is sloooow...
-	mov	$TX[0],$TX[1]
-.Lcmov$i:
-	add	$TX[0]#b,$TY#b
-	xor	($dat,$TY),%r8b
-	ror	\$8,%r8d
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-}
-for ($i=4;$i<8;$i++) {
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	lea	1($XX[0]),$XX[1]
-	movzb	($dat,$YY),$TY#d
-	movzb	$XX[1]#b,$XX[1]#d
-	movzb	($dat,$XX[1]),$TX[1]#d
-	movb	$TX[0]#b,($dat,$YY)
-	cmp	$XX[1],$YY
-	movb	$TY#b,($dat,$XX[0])
-	jne	.Lcmov$i			# Intel cmov is sloooow...
-	mov	$TX[0],$TX[1]
-.Lcmov$i:
-	add	$TX[0]#b,$TY#b
-	xor	($dat,$TY),%r9b
-	ror	\$8,%r9d
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-}
-$code.=<<___;
-	lea	-8($len),$len
-	mov	%r8d,($out)
-	lea	8($inp),$inp
-	mov	%r9d,4($out)
-	lea	8($out),$out
-
-	test	\$-8,$len
-	jnz	.Lcloop8
-	cmp	\$0,$len
-	jne	.Lcloop1
-	jmp	.Lexit
-___
-$code.=<<___;
-.align	16
-.Lcloop1:
-	add	$TX[0]#b,$YY#b
-	movzb	$YY#b,$YY#d
-	movzb	($dat,$YY),$TY#d
-	movb	$TX[0]#b,($dat,$YY)
-	movb	$TY#b,($dat,$XX[0])
-	add	$TX[0]#b,$TY#b
-	add	\$1,$XX[0]#b
-	movzb	$TY#b,$TY#d
-	movzb	$XX[0]#b,$XX[0]#d
-	movzb	($dat,$TY),$TY#d
-	movzb	($dat,$XX[0]),$TX[0]#d
-	xorb	($inp),$TY#b
-	lea	1($inp),$inp
-	movb	$TY#b,($out)
-	lea	1($out),$out
-	sub	\$1,$len
-	jnz	.Lcloop1
-	jmp	.Lexit
-
-.align	16
-.Lexit:
-	sub	\$1,$XX[0]#b
-	movl	$XX[0]#d,-8($dat)
-	movl	$YY#d,-4($dat)
-
-	mov	(%rsp),%r13
-	mov	8(%rsp),%r12
-	mov	16(%rsp),%rbx
-	add	\$24,%rsp
-.Lepilogue:
-	ret
-.size	RC4,.-RC4
-___
-}
-
-$idx="%r8";
-$ido="%r9";
-
-$code.=<<___;
-.globl	private_RC4_set_key
-.type	private_RC4_set_key,\@function,3
-.align	16
-private_RC4_set_key:
-	lea	8($dat),$dat
-	lea	($inp,$len),$inp
-	neg	$len
-	mov	$len,%rcx
-	xor	%eax,%eax
-	xor	$ido,$ido
-	xor	%r10,%r10
-	xor	%r11,%r11
-
-	mov	OPENSSL_ia32cap_P(%rip),$idx#d
-	bt	\$20,$idx#d	# RC4_CHAR?
-	jc	.Lc1stloop
-	jmp	.Lw1stloop
-
-.align	16
-.Lw1stloop:
-	mov	%eax,($dat,%rax,4)
-	add	\$1,%al
-	jnc	.Lw1stloop
-
-	xor	$ido,$ido
-	xor	$idx,$idx
-.align	16
-.Lw2ndloop:
-	mov	($dat,$ido,4),%r10d
-	add	($inp,$len,1),$idx#b
-	add	%r10b,$idx#b
-	add	\$1,$len
-	mov	($dat,$idx,4),%r11d
-	cmovz	%rcx,$len
-	mov	%r10d,($dat,$idx,4)
-	mov	%r11d,($dat,$ido,4)
-	add	\$1,$ido#b
-	jnc	.Lw2ndloop
-	jmp	.Lexit_key
-
-.align	16
-.Lc1stloop:
-	mov	%al,($dat,%rax)
-	add	\$1,%al
-	jnc	.Lc1stloop
-
-	xor	$ido,$ido
-	xor	$idx,$idx
-.align	16
-.Lc2ndloop:
-	mov	($dat,$ido),%r10b
-	add	($inp,$len),$idx#b
-	add	%r10b,$idx#b
-	add	\$1,$len
-	mov	($dat,$idx),%r11b
-	jnz	.Lcnowrap
-	mov	%rcx,$len
-.Lcnowrap:
-	mov	%r10b,($dat,$idx)
-	mov	%r11b,($dat,$ido)
-	add	\$1,$ido#b
-	jnc	.Lc2ndloop
-	movl	\$-1,256($dat)
-
-.align	16
-.Lexit_key:
-	xor	%eax,%eax
-	mov	%eax,-8($dat)
-	mov	%eax,-4($dat)
-	ret
-.size	private_RC4_set_key,.-private_RC4_set_key
-
-.globl	RC4_options
-.type	RC4_options,\@abi-omnipotent
-.align	16
-RC4_options:
-	lea	.Lopts(%rip),%rax
-	mov	OPENSSL_ia32cap_P(%rip),%edx
-	bt	\$20,%edx
-	jc	.L8xchar
-	bt	\$30,%edx
-	jnc	.Ldone
-	add	\$25,%rax
-	ret
-.L8xchar:
-	add	\$12,%rax
-.Ldone:
-	ret
-.align	64
-.Lopts:
-.asciz	"rc4(8x,int)"
-.asciz	"rc4(8x,char)"
-.asciz	"rc4(16x,int)"
-.asciz	"RC4 for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
-.align	64
-.size	RC4_options,.-RC4_options
-___
-
-# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
-#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
-if ($win64) {
-$rec="%rcx";
-$frame="%rdx";
-$context="%r8";
-$disp="%r9";
-
-$code.=<<___;
-.extern	__imp_RtlVirtualUnwind
-.type	stream_se_handler,\@abi-omnipotent
-.align	16
-stream_se_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	120($context),%rax	# pull context->Rax
-	mov	248($context),%rbx	# pull context->Rip
-
-	lea	.Lprologue(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip<prologue label
-	jb	.Lin_prologue
-
-	mov	152($context),%rax	# pull context->Rsp
-
-	lea	.Lepilogue(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip>=epilogue label
-	jae	.Lin_prologue
-
-	lea	24(%rax),%rax
-
-	mov	-8(%rax),%rbx
-	mov	-16(%rax),%r12
-	mov	-24(%rax),%r13
-	mov	%rbx,144($context)	# restore context->Rbx
-	mov	%r12,216($context)	# restore context->R12
-	mov	%r13,224($context)	# restore context->R13
-
-.Lin_prologue:
-	mov	8(%rax),%rdi
-	mov	16(%rax),%rsi
-	mov	%rax,152($context)	# restore context->Rsp
-	mov	%rsi,168($context)	# restore context->Rsi
-	mov	%rdi,176($context)	# restore context->Rdi
-
-	jmp	.Lcommon_seh_exit
-.size	stream_se_handler,.-stream_se_handler
-
-.type	key_se_handler,\@abi-omnipotent
-.align	16
-key_se_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	152($context),%rax	# pull context->Rsp
-	mov	8(%rax),%rdi
-	mov	16(%rax),%rsi
-	mov	%rsi,168($context)	# restore context->Rsi
-	mov	%rdi,176($context)	# restore context->Rdi
-
-.Lcommon_seh_exit:
-
-	mov	40($disp),%rdi		# disp->ContextRecord
-	mov	$context,%rsi		# context
-	mov	\$154,%ecx		# sizeof(CONTEXT)
-	.long	0xa548f3fc		# cld; rep movsq
-
-	mov	$disp,%rsi
-	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
-	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
-	mov	0(%rsi),%r8		# arg3, disp->ControlPc
-	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
-	mov	40(%rsi),%r10		# disp->ContextRecord
-	lea	56(%rsi),%r11		# &disp->HandlerData
-	lea	24(%rsi),%r12		# &disp->EstablisherFrame
-	mov	%r10,32(%rsp)		# arg5
-	mov	%r11,40(%rsp)		# arg6
-	mov	%r12,48(%rsp)		# arg7
-	mov	%rcx,56(%rsp)		# arg8, (NULL)
-	call	*__imp_RtlVirtualUnwind(%rip)
-
-	mov	\$1,%eax		# ExceptionContinueSearch
-	add	\$64,%rsp
-	popfq
-	pop	%r15
-	pop	%r14
-	pop	%r13
-	pop	%r12
-	pop	%rbp
-	pop	%rbx
-	pop	%rdi
-	pop	%rsi
-	ret
-.size	key_se_handler,.-key_se_handler
-
-.section	.pdata
-.align	4
-	.rva	.LSEH_begin_RC4
-	.rva	.LSEH_end_RC4
-	.rva	.LSEH_info_RC4
-
-	.rva	.LSEH_begin_private_RC4_set_key
-	.rva	.LSEH_end_private_RC4_set_key
-	.rva	.LSEH_info_private_RC4_set_key
-
-.section	.xdata
-.align	8
-.LSEH_info_RC4:
-	.byte	9,0,0,0
-	.rva	stream_se_handler
-.LSEH_info_private_RC4_set_key:
-	.byte	9,0,0,0
-	.rva	key_se_handler
-___
-}
-
-sub reg_part {
-my ($reg,$conv)=@_;
-    if ($reg =~ /%r[0-9]+/)	{ $reg .= $conv; }
-    elsif ($conv eq "b")	{ $reg =~ s/%[er]([^x]+)x?/%$1l/;	}
-    elsif ($conv eq "w")	{ $reg =~ s/%[er](.+)/%$1/;		}
-    elsif ($conv eq "d")	{ $reg =~ s/%[er](.+)/%e$1/;		}
-    return $reg;
-}
-
-$code =~ s/(%[a-z0-9]+)#([bwd])/reg_part($1,$2)/gem;
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-
-print $code;
-
-close STDOUT;
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4.c b/drivers/builtin_openssl/crypto/rc4/rc4.c
deleted file mode 100644
index c900b26055..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/* crypto/rc4/rc4.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/rc4.h>
-#include <openssl/evp.h>
-
-char *usage[]={
-"usage: rc4 args\n",
-"\n",
-" -in arg         - input file - default stdin\n",
-" -out arg        - output file - default stdout\n",
-" -key key        - password\n",
-NULL
-};
-
-int main(int argc, char *argv[])
-	{
-	FILE *in=NULL,*out=NULL;
-	char *infile=NULL,*outfile=NULL,*keystr=NULL;
-	RC4_KEY key;
-	char buf[BUFSIZ];
-	int badops=0,i;
-	char **pp;
-	unsigned char md[MD5_DIGEST_LENGTH];
-
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if 	(strcmp(*argv,"-in") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			}
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-key") == 0)
-			{
-			if (--argc < 1) goto bad;
-			keystr= *(++argv);
-			}
-		else
-			{
-			fprintf(stderr,"unknown option %s\n",*argv);
-			badops=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (badops)
-		{
-bad:
-		for (pp=usage; (*pp != NULL); pp++)
-			fprintf(stderr,"%s",*pp);
-		exit(1);
-		}
-
-	if (infile == NULL)
-		in=stdin;
-	else
-		{
-		in=fopen(infile,"r");
-		if (in == NULL)
-			{
-			perror("open");
-			exit(1);
-			}
-
-		}
-	if (outfile == NULL)
-		out=stdout;
-	else
-		{
-		out=fopen(outfile,"w");
-		if (out == NULL)
-			{
-			perror("open");
-			exit(1);
-			}
-		}
-		
-#ifdef OPENSSL_SYS_MSDOS
-	/* This should set the file to binary mode. */
-	{
-#include <fcntl.h>
-	setmode(fileno(in),O_BINARY);
-	setmode(fileno(out),O_BINARY);
-	}
-#endif
-
-	if (keystr == NULL)
-		{ /* get key */
-		i=EVP_read_pw_string(buf,BUFSIZ,"Enter RC4 password:",0);
-		if (i != 0)
-			{
-			OPENSSL_cleanse(buf,BUFSIZ);
-			fprintf(stderr,"bad password read\n");
-			exit(1);
-			}
-		keystr=buf;
-		}
-
-	EVP_Digest((unsigned char *)keystr,strlen(keystr),md,NULL,EVP_md5(),NULL);
-	OPENSSL_cleanse(keystr,strlen(keystr));
-	RC4_set_key(&key,MD5_DIGEST_LENGTH,md);
-	
-	for(;;)
-		{
-		i=fread(buf,1,BUFSIZ,in);
-		if (i == 0) break;
-		if (i < 0)
-			{
-			perror("read");
-			exit(1);
-			}
-		RC4(&key,(unsigned int)i,(unsigned char *)buf,
-			(unsigned char *)buf);
-		i=fwrite(buf,(unsigned int)i,1,out);
-		if (i != 1)
-			{
-			perror("write");
-			exit(1);
-			}
-		}
-	fclose(out);
-	fclose(in);
-	exit(0);
-	return(1);
-	}
-
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4.h b/drivers/builtin_openssl/crypto/rc4/rc4.h
deleted file mode 100644
index 88ceb46bc5..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* crypto/rc4/rc4.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_RC4_H
-#define HEADER_RC4_H
-
-#include <openssl/opensslconf.h> /* OPENSSL_NO_RC4, RC4_INT */
-#ifdef OPENSSL_NO_RC4
-#error RC4 is disabled.
-#endif
-
-#include <stddef.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct rc4_key_st
-	{
-	RC4_INT x,y;
-	RC4_INT data[256];
-	} RC4_KEY;
-
- 
-const char *RC4_options(void);
-void RC4_set_key(RC4_KEY *key, int len, const unsigned char *data);
-void private_RC4_set_key(RC4_KEY *key, int len, const unsigned char *data);
-void RC4(RC4_KEY *key, size_t len, const unsigned char *indata,
-		unsigned char *outdata);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4_enc.c b/drivers/builtin_openssl/crypto/rc4/rc4_enc.c
deleted file mode 100644
index 8c4fc6c7a3..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4_enc.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/* crypto/rc4/rc4_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc4.h>
-#include "rc4_locl.h"
-
-/* RC4 as implemented from a posting from
- * Newsgroups: sci.crypt
- * From: sterndark@netcom.com (David Sterndark)
- * Subject: RC4 Algorithm revealed.
- * Message-ID: <sternCvKL4B.Hyy@netcom.com>
- * Date: Wed, 14 Sep 1994 06:35:31 GMT
- */
-
-void RC4(RC4_KEY *key, size_t len, const unsigned char *indata,
-	     unsigned char *outdata)
-	{
-        register RC4_INT *d;
-        register RC4_INT x,y,tx,ty;
-	size_t i;
-        
-        x=key->x;     
-        y=key->y;     
-        d=key->data; 
-
-#if defined(RC4_CHUNK)
-	/*
-	 * The original reason for implementing this(*) was the fact that
-	 * pre-21164a Alpha CPUs don't have byte load/store instructions
-	 * and e.g. a byte store has to be done with 64-bit load, shift,
-	 * and, or and finally 64-bit store. Peaking data and operating
-	 * at natural word size made it possible to reduce amount of
-	 * instructions as well as to perform early read-ahead without
-	 * suffering from RAW (read-after-write) hazard. This resulted
-	 * in ~40%(**) performance improvement on 21064 box with gcc.
-	 * But it's not only Alpha users who win here:-) Thanks to the
-	 * early-n-wide read-ahead this implementation also exhibits
-	 * >40% speed-up on SPARC and 20-30% on 64-bit MIPS (depending
-	 * on sizeof(RC4_INT)).
-	 *
-	 * (*)	"this" means code which recognizes the case when input
-	 *	and output pointers appear to be aligned at natural CPU
-	 *	word boundary
-	 * (**)	i.e. according to 'apps/openssl speed rc4' benchmark,
-	 *	crypto/rc4/rc4speed.c exhibits almost 70% speed-up...
-	 *
-	 * Cavets.
-	 *
-	 * - RC4_CHUNK="unsigned long long" should be a #1 choice for
-	 *   UltraSPARC. Unfortunately gcc generates very slow code
-	 *   (2.5-3 times slower than one generated by Sun's WorkShop
-	 *   C) and therefore gcc (at least 2.95 and earlier) should
-	 *   always be told that RC4_CHUNK="unsigned long".
-	 *
-	 *					<appro@fy.chalmers.se>
-	 */
-
-# define RC4_STEP	( \
-			x=(x+1) &0xff,	\
-			tx=d[x],	\
-			y=(tx+y)&0xff,	\
-			ty=d[y],	\
-			d[y]=tx,	\
-			d[x]=ty,	\
-			(RC4_CHUNK)d[(tx+ty)&0xff]\
-			)
-
-	if ( ( ((size_t)indata  & (sizeof(RC4_CHUNK)-1)) | 
-	       ((size_t)outdata & (sizeof(RC4_CHUNK)-1)) ) == 0 )
-		{
-		RC4_CHUNK ichunk,otp;
-		const union { long one; char little; } is_endian = {1};
-
-		/*
-		 * I reckon we can afford to implement both endian
-		 * cases and to decide which way to take at run-time
-		 * because the machine code appears to be very compact
-		 * and redundant 1-2KB is perfectly tolerable (i.e.
-		 * in case the compiler fails to eliminate it:-). By
-		 * suggestion from Terrel Larson <terr@terralogic.net>
-		 * who also stands for the is_endian union:-)
-		 *
-		 * Special notes.
-		 *
-		 * - is_endian is declared automatic as doing otherwise
-		 *   (declaring static) prevents gcc from eliminating
-		 *   the redundant code;
-		 * - compilers (those I've tried) don't seem to have
-		 *   problems eliminating either the operators guarded
-		 *   by "if (sizeof(RC4_CHUNK)==8)" or the condition
-		 *   expressions themselves so I've got 'em to replace
-		 *   corresponding #ifdefs from the previous version;
-		 * - I chose to let the redundant switch cases when
-		 *   sizeof(RC4_CHUNK)!=8 be (were also #ifdefed
-		 *   before);
-		 * - in case you wonder "&(sizeof(RC4_CHUNK)*8-1)" in
-		 *   [LB]ESHFT guards against "shift is out of range"
-		 *   warnings when sizeof(RC4_CHUNK)!=8 
-		 *
-		 *			<appro@fy.chalmers.se>
-		 */
-		if (!is_endian.little)
-			{	/* BIG-ENDIAN CASE */
-# define BESHFT(c)	(((sizeof(RC4_CHUNK)-(c)-1)*8)&(sizeof(RC4_CHUNK)*8-1))
-			for (;len&(0-sizeof(RC4_CHUNK));len-=sizeof(RC4_CHUNK))
-				{
-				ichunk  = *(RC4_CHUNK *)indata;
-				otp  = RC4_STEP<<BESHFT(0);
-				otp |= RC4_STEP<<BESHFT(1);
-				otp |= RC4_STEP<<BESHFT(2);
-				otp |= RC4_STEP<<BESHFT(3);
-				if (sizeof(RC4_CHUNK)==8)
-					{
-					otp |= RC4_STEP<<BESHFT(4);
-					otp |= RC4_STEP<<BESHFT(5);
-					otp |= RC4_STEP<<BESHFT(6);
-					otp |= RC4_STEP<<BESHFT(7);
-					}
-				*(RC4_CHUNK *)outdata = otp^ichunk;
-				indata  += sizeof(RC4_CHUNK);
-				outdata += sizeof(RC4_CHUNK);
-				}
-			if (len)
-				{
-				RC4_CHUNK mask=(RC4_CHUNK)-1, ochunk;
-
-				ichunk = *(RC4_CHUNK *)indata;
-				ochunk = *(RC4_CHUNK *)outdata;
-				otp = 0;
-				i = BESHFT(0);
-				mask <<= (sizeof(RC4_CHUNK)-len)<<3;
-				switch (len&(sizeof(RC4_CHUNK)-1))
-					{
-					case 7:	otp  = RC4_STEP<<i, i-=8;
-					case 6:	otp |= RC4_STEP<<i, i-=8;
-					case 5:	otp |= RC4_STEP<<i, i-=8;
-					case 4:	otp |= RC4_STEP<<i, i-=8;
-					case 3:	otp |= RC4_STEP<<i, i-=8;
-					case 2:	otp |= RC4_STEP<<i, i-=8;
-					case 1:	otp |= RC4_STEP<<i, i-=8;
-					case 0: ; /*
-						   * it's never the case,
-						   * but it has to be here
-						   * for ultrix?
-						   */
-					}
-				ochunk &= ~mask;
-				ochunk |= (otp^ichunk) & mask;
-				*(RC4_CHUNK *)outdata = ochunk;
-				}
-			key->x=x;     
-			key->y=y;
-			return;
-			}
-		else
-			{	/* LITTLE-ENDIAN CASE */
-# define LESHFT(c)	(((c)*8)&(sizeof(RC4_CHUNK)*8-1))
-			for (;len&(0-sizeof(RC4_CHUNK));len-=sizeof(RC4_CHUNK))
-				{
-				ichunk  = *(RC4_CHUNK *)indata;
-				otp  = RC4_STEP;
-				otp |= RC4_STEP<<8;
-				otp |= RC4_STEP<<16;
-				otp |= RC4_STEP<<24;
-				if (sizeof(RC4_CHUNK)==8)
-					{
-					otp |= RC4_STEP<<LESHFT(4);
-					otp |= RC4_STEP<<LESHFT(5);
-					otp |= RC4_STEP<<LESHFT(6);
-					otp |= RC4_STEP<<LESHFT(7);
-					}
-				*(RC4_CHUNK *)outdata = otp^ichunk;
-				indata  += sizeof(RC4_CHUNK);
-				outdata += sizeof(RC4_CHUNK);
-				}
-			if (len)
-				{
-				RC4_CHUNK mask=(RC4_CHUNK)-1, ochunk;
-
-				ichunk = *(RC4_CHUNK *)indata;
-				ochunk = *(RC4_CHUNK *)outdata;
-				otp = 0;
-				i   = 0;
-				mask >>= (sizeof(RC4_CHUNK)-len)<<3;
-				switch (len&(sizeof(RC4_CHUNK)-1))
-					{
-					case 7:	otp  = RC4_STEP,    i+=8;
-					case 6:	otp |= RC4_STEP<<i, i+=8;
-					case 5:	otp |= RC4_STEP<<i, i+=8;
-					case 4:	otp |= RC4_STEP<<i, i+=8;
-					case 3:	otp |= RC4_STEP<<i, i+=8;
-					case 2:	otp |= RC4_STEP<<i, i+=8;
-					case 1:	otp |= RC4_STEP<<i, i+=8;
-					case 0: ; /*
-						   * it's never the case,
-						   * but it has to be here
-						   * for ultrix?
-						   */
-					}
-				ochunk &= ~mask;
-				ochunk |= (otp^ichunk) & mask;
-				*(RC4_CHUNK *)outdata = ochunk;
-				}
-			key->x=x;     
-			key->y=y;
-			return;
-			}
-		}
-#endif
-#define LOOP(in,out) \
-		x=((x+1)&0xff); \
-		tx=d[x]; \
-		y=(tx+y)&0xff; \
-		d[x]=ty=d[y]; \
-		d[y]=tx; \
-		(out) = d[(tx+ty)&0xff]^ (in);
-
-#ifndef RC4_INDEX
-#define RC4_LOOP(a,b,i)	LOOP(*((a)++),*((b)++))
-#else
-#define RC4_LOOP(a,b,i)	LOOP(a[i],b[i])
-#endif
-
-	i=len>>3;
-	if (i)
-		{
-		for (;;)
-			{
-			RC4_LOOP(indata,outdata,0);
-			RC4_LOOP(indata,outdata,1);
-			RC4_LOOP(indata,outdata,2);
-			RC4_LOOP(indata,outdata,3);
-			RC4_LOOP(indata,outdata,4);
-			RC4_LOOP(indata,outdata,5);
-			RC4_LOOP(indata,outdata,6);
-			RC4_LOOP(indata,outdata,7);
-#ifdef RC4_INDEX
-			indata+=8;
-			outdata+=8;
-#endif
-			if (--i == 0) break;
-			}
-		}
-	i=len&0x07;
-	if (i)
-		{
-		for (;;)
-			{
-			RC4_LOOP(indata,outdata,0); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,1); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,2); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,3); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,4); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,5); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,6); if (--i == 0) break;
-			}
-		}               
-	key->x=x;     
-	key->y=y;
-	}
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4_locl.h b/drivers/builtin_openssl/crypto/rc4/rc4_locl.h
deleted file mode 100644
index c712e1632e..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4_locl.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef HEADER_RC4_LOCL_H
-#define HEADER_RC4_LOCL_H
-#include <openssl/opensslconf.h>
-#include <cryptlib.h>
-#endif
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4_skey.c b/drivers/builtin_openssl/crypto/rc4/rc4_skey.c
deleted file mode 100644
index fda27636e7..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4_skey.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* crypto/rc4/rc4_skey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc4.h>
-#include "rc4_locl.h"
-#include <openssl/opensslv.h>
-
-const char RC4_version[]="RC4" OPENSSL_VERSION_PTEXT;
-
-const char *RC4_options(void)
-	{
-#ifdef RC4_INDEX
-	if (sizeof(RC4_INT) == 1)
-		return("rc4(idx,char)");
-	else
-		return("rc4(idx,int)");
-#else
-	if (sizeof(RC4_INT) == 1)
-		return("rc4(ptr,char)");
-	else
-		return("rc4(ptr,int)");
-#endif
-	}
-
-/* RC4 as implemented from a posting from
- * Newsgroups: sci.crypt
- * From: sterndark@netcom.com (David Sterndark)
- * Subject: RC4 Algorithm revealed.
- * Message-ID: <sternCvKL4B.Hyy@netcom.com>
- * Date: Wed, 14 Sep 1994 06:35:31 GMT
- */
-
-void private_RC4_set_key(RC4_KEY *key, int len, const unsigned char *data)
-	{
-        register RC4_INT tmp;
-        register int id1,id2;
-        register RC4_INT *d;
-        unsigned int i;
-        
-        d= &(key->data[0]);
-        key->x = 0;     
-        key->y = 0;     
-        id1=id2=0;     
-
-#define SK_LOOP(d,n) { \
-		tmp=d[(n)]; \
-		id2 = (data[id1] + tmp + id2) & 0xff; \
-		if (++id1 == len) id1=0; \
-		d[(n)]=d[id2]; \
-		d[id2]=tmp; }
-
-	for (i=0; i < 256; i++) d[i]=i;
-	for (i=0; i < 256; i+=4)
-		{
-		SK_LOOP(d,i+0);
-		SK_LOOP(d,i+1);
-		SK_LOOP(d,i+2);
-		SK_LOOP(d,i+3);
-		}
-	}
-    
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4_utl.c b/drivers/builtin_openssl/crypto/rc4/rc4_utl.c
deleted file mode 100644
index ab3f02fe6a..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4_utl.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* crypto/rc4/rc4_utl.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2011 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#include <openssl/opensslv.h>
-#include <openssl/crypto.h>
-#include <openssl/rc4.h>
-
-void RC4_set_key(RC4_KEY *key, int len, const unsigned char *data)
-	{
-#ifdef OPENSSL_FIPS
-	fips_cipher_abort(RC4);
-#endif
-	private_RC4_set_key(key, len, data);
-	}
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4s.cpp b/drivers/builtin_openssl/crypto/rc4/rc4s.cpp
deleted file mode 100644
index 3814fde997..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4s.cpp
+++ /dev/null
@@ -1,73 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/rc4.h>
-
-void main(int argc,char *argv[])
-	{
-	unsigned char buffer[1024];
-	RC4_KEY ctx;
-	unsigned long s1,s2,e1,e2;
-	unsigned char k[16];
-	unsigned long data[2];
-	unsigned char iv[8];
-	int i,num=64,numm;
-	int j=0;
-
-	if (argc >= 2)
-		num=atoi(argv[1]);
-
-	if (num == 0) num=256;
-	if (num > 1024-16) num=1024-16;
-	numm=num+8;
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<10; i++) /**/
-			{
-			RC4(&ctx,numm,buffer,buffer);
-			GetTSC(s1);
-			RC4(&ctx,numm,buffer,buffer);
-			GetTSC(e1);
-			GetTSC(s2);
-			RC4(&ctx,num,buffer,buffer);
-			GetTSC(e2);
-			RC4(&ctx,num,buffer,buffer);
-			}
-
-		printf("RC4 (%d bytes) %d %d (%d) - 8 bytes\n",num,
-			e1-s1,e2-s2,(e1-s1)-(e2-s2));
-		}
-	}
-
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4speed.c b/drivers/builtin_openssl/crypto/rc4/rc4speed.c
deleted file mode 100644
index 0ebd38123d..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4speed.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/* crypto/rc4/rc4speed.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
-/* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/rc4.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-#ifndef CLK_TCK
-#define HZ	100.0
-#else /* CLK_TCK */
-#define HZ ((double)CLK_TCK)
-#endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi) || defined(_AIX)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static unsigned char key[] ={
-			0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-			0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
-			};
-	RC4_KEY sch;
-	double a,b,c,d;
-#ifndef SIGALRM
-	long ca,cb,cc;
-#endif
-
-#ifndef TIMES
-	printf("To get the most accurate results, try to run this\n");
-	printf("program when this computer is idle.\n");
-#endif
-
-#ifndef SIGALRM
-	printf("First we calculate the approximate speed ...\n");
-	RC4_set_key(&sch,16,key);
-	count=10;
-	do	{
-		long i;
-		unsigned long data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			RC4(&sch,8,buf,buf);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count/512;
-	cc=count*8/BUFSIZE+1;
-	printf("Doing RC4_set_key %ld times\n",ca);
-#define COND(d)	(count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c)	(run)
-#define COUNT(d) (count)
-	signal(SIGALRM,sig_done);
-	printf("Doing RC4_set_key for 10 seconds\n");
-	alarm(10);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(ca); count+=4)
-		{
-		RC4_set_key(&sch,16,key);
-		RC4_set_key(&sch,16,key);
-		RC4_set_key(&sch,16,key);
-		RC4_set_key(&sch,16,key);
-		}
-	d=Time_F(STOP);
-	printf("%ld RC4_set_key's in %.2f seconds\n",count,d);
-	a=((double)COUNT(ca))/d;
-
-#ifdef SIGALRM
-	printf("Doing RC4 on %ld byte blocks for 10 seconds\n",BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing RC4 %ld times on %ld byte blocks\n",cc,BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cc); count++)
-		RC4(&sch,BUFSIZE,buf,buf);
-	d=Time_F(STOP);
-	printf("%ld RC4's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	c=((double)COUNT(cc)*BUFSIZE)/d;
-
-	printf("RC4 set_key per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
-	printf("RC4   bytes per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
-
diff --git a/drivers/builtin_openssl/crypto/rc4/rc4test.c b/drivers/builtin_openssl/crypto/rc4/rc4test.c
deleted file mode 100644
index 4312605ccb..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rc4test.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/* crypto/rc4/rc4test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_RC4
-int main(int argc, char *argv[])
-{
-    printf("No RC4 support\n");
-    return(0);
-}
-#else
-#include <openssl/rc4.h>
-#include <openssl/sha.h>
-
-static unsigned char keys[7][30]={
-	{8,0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef},
-	{8,0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef},
-	{8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{4,0xef,0x01,0x23,0x45},
-	{8,0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef},
-	{4,0xef,0x01,0x23,0x45},
-	};
-
-static unsigned char data_len[7]={8,8,8,20,28,10};
-static unsigned char data[7][30]={
-	{0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	   0x00,0x00,0x00,0x00,0xff},
-	{0x12,0x34,0x56,0x78,0x9A,0xBC,0xDE,0xF0,
-	   0x12,0x34,0x56,0x78,0x9A,0xBC,0xDE,0xF0,
-	   0x12,0x34,0x56,0x78,0x9A,0xBC,0xDE,0xF0,
-	   0x12,0x34,0x56,0x78,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff},
-	{0},
-	};
-
-static unsigned char output[7][30]={
-	{0x75,0xb7,0x87,0x80,0x99,0xe0,0xc5,0x96,0x00},
-	{0x74,0x94,0xc2,0xe7,0x10,0x4b,0x08,0x79,0x00},
-	{0xde,0x18,0x89,0x41,0xa3,0x37,0x5d,0x3a,0x00},
-	{0xd6,0xa1,0x41,0xa7,0xec,0x3c,0x38,0xdf,
-	 0xbd,0x61,0x5a,0x11,0x62,0xe1,0xc7,0xba,
-	 0x36,0xb6,0x78,0x58,0x00},
-	{0x66,0xa0,0x94,0x9f,0x8a,0xf7,0xd6,0x89,
-	 0x1f,0x7f,0x83,0x2b,0xa8,0x33,0xc0,0x0c,
-	 0x89,0x2e,0xbe,0x30,0x14,0x3c,0xe2,0x87,
-	 0x40,0x01,0x1e,0xcf,0x00},
-	{0xd6,0xa1,0x41,0xa7,0xec,0x3c,0x38,0xdf,0xbd,0x61,0x00},
-	{0},
-	};
-
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	int j;
-	unsigned char *p;
-	RC4_KEY key;
-	unsigned char obuf[512];
-
-#if !defined(OPENSSL_PIC)
-	void OPENSSL_cpuid_setup(void);
-
-	OPENSSL_cpuid_setup();
-#endif
-
-	for (i=0; i<6; i++)
-		{
-		RC4_set_key(&key,keys[i][0],&(keys[i][1]));
-		memset(obuf,0x00,sizeof(obuf));
-		RC4(&key,data_len[i],&(data[i][0]),obuf);
-		if (memcmp(obuf,output[i],data_len[i]+1) != 0)
-			{
-			printf("error calculating RC4\n");
-			printf("output:");
-			for (j=0; j<data_len[i]+1; j++)
-				printf(" %02x",obuf[j]);
-			printf("\n");
-			printf("expect:");
-			p= &(output[i][0]);
-			for (j=0; j<data_len[i]+1; j++)
-				printf(" %02x",*(p++));
-			printf("\n");
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		}
-	printf("test end processing ");
-	for (i=0; i<data_len[3]; i++)
-		{
-		RC4_set_key(&key,keys[3][0],&(keys[3][1]));
-		memset(obuf,0x00,sizeof(obuf));
-		RC4(&key,i,&(data[3][0]),obuf);
-		if ((memcmp(obuf,output[3],i) != 0) || (obuf[i] != 0))
-			{
-			printf("error in RC4 length processing\n");
-			printf("output:");
-			for (j=0; j<i+1; j++)
-				printf(" %02x",obuf[j]);
-			printf("\n");
-			printf("expect:");
-			p= &(output[3][0]);
-			for (j=0; j<i; j++)
-				printf(" %02x",*(p++));
-			printf(" 00\n");
-			err++;
-			}
-		else
-			{
-			printf(".");
-			fflush(stdout);
-			}
-		}
-	printf("done\n");
-	printf("test multi-call ");
-	for (i=0; i<data_len[3]; i++)
-		{
-		RC4_set_key(&key,keys[3][0],&(keys[3][1]));
-		memset(obuf,0x00,sizeof(obuf));
-		RC4(&key,i,&(data[3][0]),obuf);
-		RC4(&key,data_len[3]-i,&(data[3][i]),&(obuf[i]));
-		if (memcmp(obuf,output[3],data_len[3]+1) != 0)
-			{
-			printf("error in RC4 multi-call processing\n");
-			printf("output:");
-			for (j=0; j<data_len[3]+1; j++)
-				printf(" %02x",obuf[j]);
-			printf("\n");
-			printf("expect:");
-			p= &(output[3][0]);
-			for (j=0; j<data_len[3]+1; j++)
-				printf(" %02x",*(p++));
-			err++;
-			}
-		else
-			{
-			printf(".");
-			fflush(stdout);
-			}
-		}
-	printf("done\n");
-	printf("bulk test ");
-	{   unsigned char buf[513];
-	    SHA_CTX c;
-	    unsigned char md[SHA_DIGEST_LENGTH];
-	    static unsigned char expected[]={
-		0xa4,0x7b,0xcc,0x00,0x3d,0xd0,0xbd,0xe1,0xac,0x5f,
-		0x12,0x1e,0x45,0xbc,0xfb,0x1a,0xa1,0xf2,0x7f,0xc5 };
-
-		RC4_set_key(&key,keys[0][0],&(keys[3][1]));
-		memset(buf,'\0',sizeof(buf));
-		SHA1_Init(&c);
-		for (i=0;i<2571;i++) {
-			RC4(&key,sizeof(buf),buf,buf);
-			SHA1_Update(&c,buf,sizeof(buf));
-		}
-		SHA1_Final(md,&c);
-
-		if (memcmp(md,expected,sizeof(md))) {
-			printf("error in RC4 bulk test\n");
-			printf("output:");
-			for (j=0; j<(int)sizeof(md); j++)
-				printf(" %02x",md[j]);
-			printf("\n");
-			printf("expect:");
-			for (j=0; j<(int)sizeof(md); j++)
-				printf(" %02x",expected[j]);
-			printf("\n");
-			err++;
-		}
-		else	printf("ok\n");
-	}
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EXIT(err);
-	return(0);
-	}
-#endif
diff --git a/drivers/builtin_openssl/crypto/rc4/rrc4.doc b/drivers/builtin_openssl/crypto/rc4/rrc4.doc
deleted file mode 100644
index 2f9a953c12..0000000000
--- a/drivers/builtin_openssl/crypto/rc4/rrc4.doc
+++ /dev/null
@@ -1,278 +0,0 @@
-Newsgroups: sci.crypt,alt.security,comp.security.misc,alt.privacy
-Path: ghost.dsi.unimi.it!univ-lyon1.fr!jussieu.fr!zaphod.crihan.fr!warwick!clyde.open.ac.uk!strath-cs!bnr.co.uk!bt!pipex!howland.reston.ans.net!europa.eng.gtefsd.com!MathWorks.Com!yeshua.marcam.com!charnel.ecst.csuchico.edu!csusac!csus.edu!netcom.com!sterndark
-From: sterndark@netcom.com (David Sterndark)
-Subject: RC4 Algorithm revealed.
-Message-ID: <sternCvKL4B.Hyy@netcom.com>
-Sender: sterndark@netcom.com 
-Organization: NETCOM On-line Communication Services (408 261-4700 guest)
-X-Newsreader: TIN [version 1.2 PL1]
-Date: Wed, 14 Sep 1994 06:35:31 GMT
-Lines: 263
-Xref: ghost.dsi.unimi.it sci.crypt:27332 alt.security:14732 comp.security.misc:11701 alt.privacy:16026
-
-I am shocked,  shocked, I tell you,  shocked, to discover
-that the cypherpunks have illegaly and criminally revealed
-a crucial RSA trade secret and harmed the security of
-America by reverse engineering the RC4 algorithm and
-publishing it to the world.
- 
-On Saturday morning an anonymous cypherpunk wrote:
- 
- 
-   SUBJECT:  RC4 Source Code
- 
- 
-   I've tested this.  It is compatible with the RC4 object module
-   that comes in the various RSA toolkits.  
- 
-   /* rc4.h */
-   typedef struct rc4_key
-   {      
-        unsigned char state[256];       
-        unsigned char x;        
-        unsigned char y;
-   } rc4_key;
-   void prepare_key(unsigned char *key_data_ptr,int key_data_len,
-   rc4_key *key);
-   void rc4(unsigned char *buffer_ptr,int buffer_len,rc4_key * key);
-   
-   
-   /*rc4.c */
-   #include "rc4.h"
-   static void swap_byte(unsigned char *a, unsigned char *b);
-   void prepare_key(unsigned char *key_data_ptr, int key_data_len,
-   rc4_key *key)
-   {
-        unsigned char swapByte;
-        unsigned char index1;
-        unsigned char index2;
-        unsigned char* state;
-        short counter;     
-        
-        state = &key->state[0];         
-        for(counter = 0; counter < 256; counter++)              
-        state[counter] = counter;               
-        key->x = 0;     
-        key->y = 0;     
-        index1 = 0;     
-        index2 = 0;             
-        for(counter = 0; counter < 256; counter++)      
-        {               
-             index2 = (key_data_ptr[index1] + state[counter] +
-                index2) % 256;                
-             swap_byte(&state[counter], &state[index2]);            
-   
-             index1 = (index1 + 1) % key_data_len;  
-        }       
-    }
-    
-    void rc4(unsigned char *buffer_ptr, int buffer_len, rc4_key *key)
-    { 
-        unsigned char x;
-        unsigned char y;
-        unsigned char* state;
-        unsigned char xorIndex;
-        short counter;              
-        
-        x = key->x;     
-        y = key->y;     
-        
-        state = &key->state[0];         
-        for(counter = 0; counter < buffer_len; counter ++)      
-        {               
-             x = (x + 1) % 256;                      
-             y = (state[x] + y) % 256;               
-             swap_byte(&state[x], &state[y]);                        
-                  
-             xorIndex = (state[x] + state[y]) % 256;                 
-                  
-             buffer_ptr[counter] ^= state[xorIndex];         
-         }               
-         key->x = x;     
-         key->y = y;
-    }
-    
-    static void swap_byte(unsigned char *a, unsigned char *b)
-    {
-        unsigned char swapByte; 
-        
-        swapByte = *a; 
-        *a = *b;      
-        *b = swapByte;
-    }
- 
- 
- 
-Another cypherpunk, this one not anonymous, tested the
-output from this algorithm against the output from
-official RC4 object code
- 
- 
-   Date: Tue, 13 Sep 94 18:37:56 PDT
-   From: ekr@eit.COM (Eric Rescorla)
-   Message-Id: <9409140137.AA17743@eitech.eit.com>
-   Subject: RC4 compatibility testing
-   Cc: cypherpunks@toad.com
-   
-   One data point:
-   
-   I can't say anything about the internals of RC4 versus the
-   algorithm that Bill Sommerfeld is rightly calling 'Alleged RC4',
-   since I don't know anything about RC4's internals. 
-   
-   However, I do have a (legitimately acquired) copy of BSAFE2 and
-   so I'm able to compare the output of this algorithm to the output
-   of genuine RC4 as found in BSAFE. I chose a set of test vectors
-   and ran them through both algorithms. The algorithms appear to
-   give identical results, at least with these key/plaintext pairs.
-   
-   I note that this is the algorithm _without_ Hal Finney's
-   proposed modification
-   
-   (see <199409130605.XAA24133@jobe.shell.portal.com>).
-   
-   The vectors I used (together with the ciphertext they produce)
-   follow at the end of this message.
-   
-   -Ekr
-   
-   Disclaimer: This posting does not reflect the opinions of EIT.
-   
-   --------------------results follow--------------
-   Test vector 0
-   Key: 0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef 
-   Input: 0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef 
-   0 Output: 0x75 0xb7 0x87 0x80 0x99 0xe0 0xc5 0x96 
-   
-   Test vector 1
-   Key: 0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef 
-   Input: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
-   0 Output: 0x74 0x94 0xc2 0xe7 0x10 0x4b 0x08 0x79 
-   
-   Test vector 2
-   Key: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
-   Input: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
-   0 Output: 0xde 0x18 0x89 0x41 0xa3 0x37 0x5d 0x3a 
-   
-   Test vector 3
-   Key: 0xef 0x01 0x23 0x45 
-   Input: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
-   0 Output: 0xd6 0xa1 0x41 0xa7 0xec 0x3c 0x38 0xdf 0xbd 0x61 
-   
-   Test vector 4
-   Key: 0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef 
-   Input: 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 
-   0 Output: 0x75 0x95 0xc3 0xe6 0x11 0x4a 0x09 0x78 0x0c 0x4a 0xd4 
-   0x52 0x33 0x8e 0x1f 0xfd 0x9a 0x1b 0xe9 0x49 0x8f 
-   0x81 0x3d 0x76 0x53 0x34 0x49 0xb6 0x77 0x8d 0xca 
-   0xd8 0xc7 0x8a 0x8d 0x2b 0xa9 0xac 0x66 0x08 0x5d 
-   0x0e 0x53 0xd5 0x9c 0x26 0xc2 0xd1 0xc4 0x90 0xc1 
-   0xeb 0xbe 0x0c 0xe6 0x6d 0x1b 0x6b 0x1b 0x13 0xb6 
-   0xb9 0x19 0xb8 0x47 0xc2 0x5a 0x91 0x44 0x7a 0x95 
-   0xe7 0x5e 0x4e 0xf1 0x67 0x79 0xcd 0xe8 0xbf 0x0a 
-   0x95 0x85 0x0e 0x32 0xaf 0x96 0x89 0x44 0x4f 0xd3 
-   0x77 0x10 0x8f 0x98 0xfd 0xcb 0xd4 0xe7 0x26 0x56 
-   0x75 0x00 0x99 0x0b 0xcc 0x7e 0x0c 0xa3 0xc4 0xaa 
-   0xa3 0x04 0xa3 0x87 0xd2 0x0f 0x3b 0x8f 0xbb 0xcd 
-   0x42 0xa1 0xbd 0x31 0x1d 0x7a 0x43 0x03 0xdd 0xa5 
-   0xab 0x07 0x88 0x96 0xae 0x80 0xc1 0x8b 0x0a 0xf6 
-   0x6d 0xff 0x31 0x96 0x16 0xeb 0x78 0x4e 0x49 0x5a 
-   0xd2 0xce 0x90 0xd7 0xf7 0x72 0xa8 0x17 0x47 0xb6 
-   0x5f 0x62 0x09 0x3b 0x1e 0x0d 0xb9 0xe5 0xba 0x53 
-   0x2f 0xaf 0xec 0x47 0x50 0x83 0x23 0xe6 0x71 0x32 
-   0x7d 0xf9 0x44 0x44 0x32 0xcb 0x73 0x67 0xce 0xc8 
-   0x2f 0x5d 0x44 0xc0 0xd0 0x0b 0x67 0xd6 0x50 0xa0 
-   0x75 0xcd 0x4b 0x70 0xde 0xdd 0x77 0xeb 0x9b 0x10 
-   0x23 0x1b 0x6b 0x5b 0x74 0x13 0x47 0x39 0x6d 0x62 
-   0x89 0x74 0x21 0xd4 0x3d 0xf9 0xb4 0x2e 0x44 0x6e 
-   0x35 0x8e 0x9c 0x11 0xa9 0xb2 0x18 0x4e 0xcb 0xef 
-   0x0c 0xd8 0xe7 0xa8 0x77 0xef 0x96 0x8f 0x13 0x90 
-   0xec 0x9b 0x3d 0x35 0xa5 0x58 0x5c 0xb0 0x09 0x29 
-   0x0e 0x2f 0xcd 0xe7 0xb5 0xec 0x66 0xd9 0x08 0x4b 
-   0xe4 0x40 0x55 0xa6 0x19 0xd9 0xdd 0x7f 0xc3 0x16 
-   0x6f 0x94 0x87 0xf7 0xcb 0x27 0x29 0x12 0x42 0x64 
-   0x45 0x99 0x85 0x14 0xc1 0x5d 0x53 0xa1 0x8c 0x86 
-   0x4c 0xe3 0xa2 0xb7 0x55 0x57 0x93 0x98 0x81 0x26 
-   0x52 0x0e 0xac 0xf2 0xe3 0x06 0x6e 0x23 0x0c 0x91 
-   0xbe 0xe4 0xdd 0x53 0x04 0xf5 0xfd 0x04 0x05 0xb3 
-   0x5b 0xd9 0x9c 0x73 0x13 0x5d 0x3d 0x9b 0xc3 0x35 
-   0xee 0x04 0x9e 0xf6 0x9b 0x38 0x67 0xbf 0x2d 0x7b 
-   0xd1 0xea 0xa5 0x95 0xd8 0xbf 0xc0 0x06 0x6f 0xf8 
-   0xd3 0x15 0x09 0xeb 0x0c 0x6c 0xaa 0x00 0x6c 0x80 
-   0x7a 0x62 0x3e 0xf8 0x4c 0x3d 0x33 0xc1 0x95 0xd2 
-   0x3e 0xe3 0x20 0xc4 0x0d 0xe0 0x55 0x81 0x57 0xc8 
-   0x22 0xd4 0xb8 0xc5 0x69 0xd8 0x49 0xae 0xd5 0x9d 
-   0x4e 0x0f 0xd7 0xf3 0x79 0x58 0x6b 0x4b 0x7f 0xf6 
-   0x84 0xed 0x6a 0x18 0x9f 0x74 0x86 0xd4 0x9b 0x9c 
-   0x4b 0xad 0x9b 0xa2 0x4b 0x96 0xab 0xf9 0x24 0x37 
-   0x2c 0x8a 0x8f 0xff 0xb1 0x0d 0x55 0x35 0x49 0x00 
-   0xa7 0x7a 0x3d 0xb5 0xf2 0x05 0xe1 0xb9 0x9f 0xcd 
-   0x86 0x60 0x86 0x3a 0x15 0x9a 0xd4 0xab 0xe4 0x0f 
-   0xa4 0x89 0x34 0x16 0x3d 0xdd 0xe5 0x42 0xa6 0x58 
-   0x55 0x40 0xfd 0x68 0x3c 0xbf 0xd8 0xc0 0x0f 0x12 
-   0x12 0x9a 0x28 0x4d 0xea 0xcc 0x4c 0xde 0xfe 0x58 
-   0xbe 0x71 0x37 0x54 0x1c 0x04 0x71 0x26 0xc8 0xd4 
-   0x9e 0x27 0x55 0xab 0x18 0x1a 0xb7 0xe9 0x40 0xb0 
-   0xc0 
-   
-
-
--- 
- ---------------------------------------------------------------------
-We have the right to defend ourselves and our
-property, because of the kind of animals that we              James A. Donald
-are.  True law derives from this right, not from
-the arbitrary power of the omnipotent state.                jamesd@netcom.com
-
-