i18n: Sync classref translations with Weblate

(cherry picked from commit 7379f2c76adfa9ce739bdee98c2feaf4169de9b8)

41 files changed, 5106 insertions, 1840 deletions

diff --git a/doc/classes/VehicleWheel3D.xml b/doc/classes/VehicleWheel3D.xml
index 1c164d7c9a..ac126f824e 100644
--- a/doc/classes/VehicleWheel3D.xml
+++ b/doc/classes/VehicleWheel3D.xml
@@ -48,7 +48,7 @@
 			The damping applied to the spring when relaxing. This value should be between 0.0 (no damping) and 1.0. This value should always be slightly higher than the [member damping_compression] property. For a [member damping_compression] value of 0.3, try a relaxation value of 0.5.
 		</member>
 		<member name="engine_force" type="float" setter="set_engine_force" getter="get_engine_force" default="0.0">
-			Accelerates the wheel by applying an engine force. The wheel is only speed up if it is in contact with a surface. The [member RigidDynamicBody3D.mass] of the vehicle has an effect on the acceleration of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 range for acceleration.
+			Accelerates the wheel by applying an engine force. The wheel is only sped up if it is in contact with a surface. The [member RigidDynamicBody3D.mass] of the vehicle has an effect on the acceleration of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 range for acceleration.
 			[b]Note:[/b] The simulation does not take the effect of gears into account, you will need to add logic for this if you wish to simulate gears.
 			A negative value will result in the wheel reversing.
 		</member>
diff --git a/doc/translations/ar.po b/doc/translations/ar.po
index b21374a37f..a4488f3339 100644
--- a/doc/translations/ar.po
+++ b/doc/translations/ar.po
@@ -10132,7 +10132,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10297,7 +10303,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28607,13 +28619,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30029,9 +30042,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30605,10 +30618,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30621,6 +30637,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45558,6 +45580,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54487,7 +54516,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54527,15 +54557,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56011,11 +56042,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66053,11 +66103,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66137,8 +66187,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/ca.po b/doc/translations/ca.po
index 0e33b91074..bd84c415cc 100644
--- a/doc/translations/ca.po
+++ b/doc/translations/ca.po
@@ -10078,7 +10078,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10243,7 +10249,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28526,13 +28538,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29946,9 +29959,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30522,10 +30535,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30538,6 +30554,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45405,6 +45427,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54329,7 +54358,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54369,15 +54399,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55853,11 +55884,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65874,11 +65924,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65958,8 +66008,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/classes.pot b/doc/translations/classes.pot
index 8d833031fe..90ebdbf9f3 100644
--- a/doc/translations/classes.pot
+++ b/doc/translations/classes.pot
@@ -9958,7 +9958,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10123,7 +10129,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28403,13 +28415,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29823,9 +29836,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30399,10 +30412,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30415,6 +30431,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45282,6 +45304,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54206,7 +54235,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54246,15 +54276,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55730,11 +55761,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65751,7 +65801,7 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set "
 "to [code]true[/code] and are in contact with a surface. The [member "
 "RigidBody.mass] of the vehicle has an effect on the acceleration of the "
 "vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
@@ -65835,7 +65885,7 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
+"Accelerates the wheel by applying an engine force. The wheel is only sped "
 "up if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
diff --git a/doc/translations/cs.po b/doc/translations/cs.po
index 85a9d50b28..48a79d9ec3 100644
--- a/doc/translations/cs.po
+++ b/doc/translations/cs.po
@@ -10475,7 +10475,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10640,7 +10646,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28996,13 +29008,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30419,9 +30432,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30995,10 +31008,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -31010,6 +31026,15 @@ msgid "Mouse and input coordinates"
 msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
+#, fuzzy
+msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+"Vrací [code]true[/code] pokud si jsou [code]a[/code] a [code]b[/code] "
+"přiblížně rovny."
+
+#: doc/classes/InputEventMouseMotion.xml
 msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
@@ -45974,6 +45999,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54913,7 +54945,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54953,15 +54986,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56438,11 +56472,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66526,11 +66579,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66610,8 +66663,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/de.po b/doc/translations/de.po
index ae8d8f2165..ba4e24c02b 100644
--- a/doc/translations/de.po
+++ b/doc/translations/de.po
@@ -12026,7 +12026,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -12192,7 +12198,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -30778,13 +30790,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -32210,9 +32223,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -32786,10 +32799,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -32801,6 +32817,14 @@ msgid "Mouse and input coordinates"
 msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
+#, fuzzy
+msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+"Liefert [code]true[/code] wenn die Länge der Zeichenkette [code]0[/code] ist."
+
+#: doc/classes/InputEventMouseMotion.xml
 msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
@@ -47902,6 +47926,14 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+#, fuzzy
+msgid "Sorts the elements of the array in ascending order."
+msgstr "Entfernt das Element der Arrays dessen Position übergeben wurde."
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -56953,7 +56985,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56993,15 +57026,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -58489,11 +58523,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -68828,11 +68881,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -68912,8 +68965,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/el.po b/doc/translations/el.po
index d3cbf69925..c7236b41df 100644
--- a/doc/translations/el.po
+++ b/doc/translations/el.po
@@ -9976,7 +9976,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10141,7 +10147,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28452,13 +28464,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29874,9 +29887,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30450,10 +30463,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30466,6 +30482,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45384,6 +45406,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54313,7 +54342,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54353,15 +54383,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55837,11 +55868,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65879,11 +65929,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65963,8 +66013,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/es.po b/doc/translations/es.po
index e38eb521c0..50425a97d9 100644
--- a/doc/translations/es.po
+++ b/doc/translations/es.po
@@ -13142,8 +13142,14 @@ msgstr ""
 "escena."
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
-msgstr "El bus en el que se está reproduciendo este audio."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
+msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
 msgid ""
@@ -13329,9 +13335,14 @@ msgstr ""
 "escena."
 
 #: doc/classes/AudioStreamPlayer3D.xml
-#, fuzzy
-msgid "The bus on which this audio is playing."
-msgstr "El bus en el que se está reproduciendo este audio."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
+msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
@@ -37678,13 +37689,14 @@ msgstr "Número máximo de redirecciones permitidas."
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -39554,9 +39566,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 "Habilita o deshabilita la acumulación de eventos de entrada similares "
 "enviados por el sistema operativo. Cuando la acumulación de entrada está "
@@ -40315,10 +40327,13 @@ msgstr "Tipo de evento de entrada para los eventos de movimiento del ratón."
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -40342,6 +40357,15 @@ msgid "Mouse and input coordinates"
 msgstr "Medio desplazamiento en la coordenada X."
 
 #: doc/classes/InputEventMouseMotion.xml
+#, fuzzy
+msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+"Devuelve el número de disposiciones del teclado.\n"
+"[b]Nota:[/b] Este método está implementado en Linux, macOS y Windows."
+
+#: doc/classes/InputEventMouseMotion.xml
 msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
@@ -60077,6 +60101,14 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr "Cambia el byte en el índice dado."
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+#, fuzzy
+msgid "Sorts the elements of the array in ascending order."
+msgstr "Elimina un elemento del array por indice."
+
 #: doc/classes/PoolByteArray.xml
 #, fuzzy
 msgid ""
@@ -71442,7 +71474,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -71482,15 +71515,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -73306,11 +73340,41 @@ msgstr ""
 
 #: doc/classes/Spatial.xml
 #, fuzzy
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+"Parte de la rotación de la transformación local en radianes, especificada en "
+"términos de ángulos YXZ-Euler en el formato (ángulo X, ángulo Y, ángulo Z).\n"
+"[b]Nota:[/b] En el sentido matemático, la rotación es una matriz y no un "
+"vector. Los tres ángulos de Euler, que son los tres parámetros "
+"independientes de la parametrización del ángulo de Euler de la matriz de "
+"rotación, se almacenan en una estructura de datos [Vector3] no porque la "
+"rotación sea un vector, sino sólo porque el [Vector3] existe como una "
+"estructura de datos conveniente para almacenar 3 números reales. Por lo "
+"tanto, la aplicación de operaciones afines en el \"vector\" de rotación no "
+"es significativa."
+
+#: doc/classes/Spatial.xml
+#, fuzzy
 msgid "World space (global) [Transform] of this node."
 msgstr "World3D espacio (global) [Transform] de este nodo."
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -86302,11 +86366,11 @@ msgstr ""
 #, fuzzy
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -86430,8 +86494,8 @@ msgstr ""
 #: doc/classes/VehicleWheel.xml
 #, fuzzy
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/fa.po b/doc/translations/fa.po
index db8018d209..5f170b2b28 100644
--- a/doc/translations/fa.po
+++ b/doc/translations/fa.po
@@ -10399,7 +10399,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10564,7 +10570,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28847,13 +28859,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30267,9 +30280,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30843,10 +30856,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30859,6 +30875,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45744,6 +45766,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54672,7 +54701,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54712,15 +54742,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56196,11 +56227,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66217,11 +66267,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66301,8 +66351,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/fi.po b/doc/translations/fi.po
index 9317c255a7..0ab098fd33 100644
--- a/doc/translations/fi.po
+++ b/doc/translations/fi.po
@@ -10049,7 +10049,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10214,7 +10220,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28535,13 +28547,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29957,9 +29970,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30533,10 +30546,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30549,6 +30565,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45469,6 +45491,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54398,7 +54427,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54438,15 +54468,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55923,11 +55954,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65972,11 +66022,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66056,8 +66106,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/fil.po b/doc/translations/fil.po
index f7a8c0fd9b..2dabe612e9 100644
--- a/doc/translations/fil.po
+++ b/doc/translations/fil.po
@@ -9974,7 +9974,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10139,7 +10145,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28422,13 +28434,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29842,9 +29855,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30418,10 +30431,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30434,6 +30450,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45301,6 +45323,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54225,7 +54254,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54265,15 +54295,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55749,11 +55780,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65770,11 +65820,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65854,8 +65904,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/fr.po b/doc/translations/fr.po
index 7b3d3c7435..9d5c5f4a01 100644
--- a/doc/translations/fr.po
+++ b/doc/translations/fr.po
@@ -61,7 +61,7 @@ msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
 "POT-Creation-Date: \n"
-"PO-Revision-Date: 2022-07-06 04:47+0000\n"
+"PO-Revision-Date: 2022-07-18 08:12+0000\n"
 "Last-Translator: Maxime Leroy <lisacintosh@gmail.com>\n"
 "Language-Team: French <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/fr/>\n"
@@ -70,7 +70,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -8364,6 +8364,9 @@ msgid ""
 "Returns the number of inputs for the transition node with name [code]id[/"
 "code]. You can add inputs by right-clicking on the transition node."
 msgstr ""
+"Retourne le nombre d'entrées pour le nœud de transition nommé [code]id[/"
+"code]. Vous pouvez ajouter des entrées en faisant un clic droit sur le nœud "
+"de transition."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8378,6 +8381,9 @@ msgid ""
 "transition node with name [code]id[/code] is set to automatically advance to "
 "the next input upon completion."
 msgstr ""
+"Retourne [code]true[/code] si l'entrée [code]input_idx[/code] du nœud de "
+"transition nommé [code]id[/code] est définie pour avancer automatiquement "
+"vers la prochaine entrée dès que la transition se termine."
 
 #: doc/classes/AnimationTreePlayer.xml
 #, fuzzy
@@ -8393,6 +8399,8 @@ msgid ""
 "The transition node with name [code]id[/code] advances to its next input "
 "automatically when the input at [code]input_idx[/code] completes."
 msgstr ""
+"Le nœud de transition nommé [code]id[/code] avance à sa prochaine entrée "
+"automatiquement lorsque l'entrée [code]input_idx[/code] se termine."
 
 #: doc/classes/AnimationTreePlayer.xml
 msgid ""
@@ -8490,6 +8498,10 @@ msgid ""
 "exiting. Can also alter or override local physics parameters (gravity, "
 "damping) and route audio to custom audio buses."
 msgstr ""
+"La zone 3D qui détecte nœuds [CollisionObject] qui se chevauchent, entrent "
+"ou sortent. Peut également modifier ou surcharger les paramètres de physique "
+"locale (gravité, amortissement) et passer l'audio à des bus audio "
+"personnalisés."
 
 #: doc/classes/Area.xml doc/classes/QuadMesh.xml doc/classes/Viewport.xml
 #: doc/classes/ViewportTexture.xml
@@ -8570,6 +8582,10 @@ msgid ""
 "See [member ProjectSettings.physics/3d/default_angular_damp] for more "
 "details about damping."
 msgstr ""
+"La vitesse à laquelle les objets s'arrêtent de tourner dans cette zone. "
+"Représente la vitesse angulaire perdue par seconde.\n"
+"Voir [member ProjectSettings.physics/3d/default_angular_damp] pour plus de "
+"détails sur l'amortissement."
 
 #: doc/classes/Area.xml doc/classes/Area2D.xml
 msgid "The name of the area's audio bus."
@@ -8681,6 +8697,9 @@ msgid ""
 "be set to [code]true[/code].\n"
 "[code]area[/code] the other Area."
 msgstr ""
+"Émis quand une autre Area entre dans cette zone. Nécessite [member "
+"monitoring] d'être défini à [code]true[/code].\n"
+"[code]area[/code] l'autre Area."
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8688,6 +8707,9 @@ msgid ""
 "be set to [code]true[/code].\n"
 "[code]area[/code] the other Area."
 msgstr ""
+"Émis quand une autre Area quitte cette Area. Nécessite [member monitoring] "
+"d'être défini à [code]true[/code].\n"
+"[code]area[/code] l'autre Area."
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8855,6 +8877,14 @@ msgid ""
 "list is modified once during the physics step, not immediately after objects "
 "are moved. Consider using signals instead."
 msgstr ""
+"Retourne la liste des intersections entre les [PhysiqueBody2D]. Le calque "
+"[member CollisionObject2D.collision_layer] du corps entrant en intersection "
+"doit être dans le masque [member CollisionObject2D.collision_mask] de ce "
+"corps pour être détecté.\n"
+"Pour des raisons de performance (les collisions sont toutes traitées en même "
+"temps) cette liste est modifiée une fois pendant l'étape physique, pas "
+"immédiatement après le déplacement des objets. Considérez plutôt "
+"l'utilisation des signaux."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8863,6 +8893,11 @@ msgid ""
 "For performance, the list of overlaps is updated once per frame and before "
 "the physics step. Consider using signals instead."
 msgstr ""
+"Si [code]true[/code], la zone donnée recouvre la Area2D.\n"
+"[b]Note :[/b] Le résultat de ce test n'est pas immédiat après le déplacement "
+"des objets. Pour des raisons de performance, la liste des collisions est "
+"mise à jour une fois par trame et avant l'étape physique. Considérez plutôt "
+"l'utilisation des signaux."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8913,6 +8948,10 @@ msgid ""
 "See [member ProjectSettings.physics/2d/default_linear_damp] for more details "
 "about damping."
 msgstr ""
+"La vitesse à laquelle les objets arrêtent de se déplacer dans cette zone. "
+"Représente la vitesse linéaire perdue par seconde.\n"
+"Voir [member ProjectSettings.physics/2d/default_linear_damp] pour plus de "
+"détails sur l'amortissement."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8920,6 +8959,9 @@ msgid ""
 "to be set to [code]true[/code].\n"
 "[code]area[/code] the other Area2D."
 msgstr ""
+"Émis quand une autre Area2D entre dans cette Area2D. Nécessite [member "
+"monitoring] d'être défini à [code]true[/code].\n"
+"[code]area[/code] l'autre Area2D."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -8927,6 +8969,9 @@ msgid ""
 "to be set to [code]true[/code].\n"
 "[code]area[/code] the other Area2D."
 msgstr ""
+"Émis quand une autre Area2D quitte cette Area2D. Nécessite [member "
+"monitoring] d'être défini à [code]true[/code].\n"
+"[code]area[/code] l'autre Area2D."
 
 #: doc/classes/Area2D.xml
 msgid ""
@@ -9858,7 +9903,7 @@ msgstr ""
 
 #: doc/classes/ArrayMesh.xml
 msgid "Will regenerate normal maps for the [ArrayMesh]."
-msgstr ""
+msgstr "Régénérera les cartes normales pour le [ArrayMesh]."
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
@@ -9873,12 +9918,16 @@ msgid ""
 "Returns the length in indices of the index array in the requested surface "
 "(see [method add_surface_from_arrays])."
 msgstr ""
+"Retourne la longueur des indices du tableau d'indices pour la surface "
+"spécifiée (voir [method add_surface_from_arrays].)"
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
 "Returns the length in vertices of the vertex array in the requested surface "
 "(see [method add_surface_from_arrays])."
 msgstr ""
+"Retourne la longueur des sommets du tableau des sommets dans la surface "
+"spécifiée (voir [method add_surface_from_arrays].)"
 
 #: doc/classes/ArrayMesh.xml
 msgid ""
@@ -9926,7 +9975,7 @@ msgstr ""
 
 #: doc/classes/ArrayMesh.xml
 msgid "Sets the blend shape mode to one of [enum Mesh.BlendShapeMode]."
-msgstr ""
+msgstr "Définit le mode de forme de mélange avec [enum Mesh.BlendShapeMode]"
 
 #: doc/classes/ArrayMesh.xml doc/classes/PrimitiveMesh.xml
 msgid ""
@@ -10865,7 +10914,7 @@ msgid ""
 msgstr ""
 "Retourne l'horodatage absolu (en μs) de la dernière mise à jour des yeux AR/"
 "VR du [ARVRServer] envoyée au [VisualServer]. La valeur est récupérée via un "
-"appel interne à [method OS.get_ticks_usec]"
+"appel interne à [method OS.get_ticks_usec]."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10885,7 +10934,7 @@ msgid ""
 msgstr ""
 "Retourne l'horodatage absolu (en μs) du dernier appel de mise à jour du "
 "[ARVRServer]. La valeur vient est récupérée via un appel interne à [method "
-"OS.get_ticks_usec]"
+"OS.get_ticks_usec]."
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -11406,6 +11455,8 @@ msgid ""
 "Returns the capacity of the structure backing the points, useful in "
 "conjunction with [code]reserve_space[/code]."
 msgstr ""
+"Retourne la capacité de la structure qui garde les points en cache, utile "
+"avec [code]reserve_space[/code]."
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -11468,6 +11519,8 @@ msgid ""
 "Returns the weight scale of the point associated with the given [code]id[/"
 "code]."
 msgstr ""
+"Retourne l'échelle de poids du point associé pour le [code]id[/code] "
+"spécifié."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid "Returns an array of all points."
@@ -11484,6 +11537,8 @@ msgid ""
 "Returns whether a point is disabled or not for pathfinding. By default, all "
 "points are enabled."
 msgstr ""
+"Retourne si un point est désactivé ou non pour le calcul du chemin. Par "
+"défaut, tous les points sont activés."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
@@ -11499,6 +11554,9 @@ msgid ""
 "you're adding a known large number of points at once, for a grid for "
 "instance. New capacity must be greater or equals to old capacity."
 msgstr ""
+"Réserve l'espace interne pour [code]num_nodes[/code] points, utile si vous "
+"voulez ajouter un grand nombre de points à la fois, pour une grille par "
+"exemple. La nouvelle capacité doit être supérieure ou égale à l'ancienne."
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
@@ -11859,6 +11917,9 @@ msgid ""
 "Limits the frequencies in a range around the [member AudioEffectFilter."
 "cutoff_hz] and allows frequencies outside of this range to pass."
 msgstr ""
+"Limite l'intensité des fréquences dans la gamme autour de [member "
+"AudioEffectFilter.cutoff_hz], et permet aux fréquences en dehors de cette "
+"gamme de passer."
 
 #: doc/classes/AudioEffectBandPassFilter.xml
 msgid "Adds a band pass filter to the audio bus."
@@ -11869,6 +11930,9 @@ msgid ""
 "Attenuates the frequencies inside of a range around the [member "
 "AudioEffectFilter.cutoff_hz] and cuts frequencies outside of this band."
 msgstr ""
+"Atténue les fréquences à l'intérieur de la gamme autour de [member "
+"AudioEffectFilter.cutoff_hz] et coupe les fréquences en dehors de cette "
+"gamme."
 
 #: doc/classes/AudioEffectCapture.xml
 msgid "Captures audio from an audio bus in real-time."
@@ -12058,6 +12122,9 @@ msgid ""
 "Compressor's delay time to stop reducing the signal after the signal level "
 "falls below the threshold, in milliseconds. Value can range from 20 to 2000."
 msgstr ""
+"Le retard du compresseur avant d'arrêter de réduire le signal après que le "
+"niveau de signal sous le seuil, en millisecondes. La valeur peut aller de 20 "
+"à 2000."
 
 #: doc/classes/AudioEffectCompressor.xml
 msgid "Reduce the sound level using another audio bus for threshold detection."
@@ -12090,6 +12157,10 @@ msgid ""
 "echo. Delay effects range from a subtle echo effect to a pronounced blending "
 "of previous sounds with new sounds."
 msgstr ""
+"Joue le signal d'entrée après une période de temps. Le signal retardé peut "
+"être joué plusieurs fois pour créer un écho qui s'amortit dans le temps. Les "
+"effets de retard vont d'un subtil écho à un mélange prononcé de sons "
+"précédents avec les nouveaux sons."
 
 #: doc/classes/AudioEffectDelay.xml
 msgid ""
@@ -12128,6 +12199,8 @@ msgid ""
 "Pan position for [code]tap1[/code]. Value can range from -1 (fully left) to "
 "1 (fully right)."
 msgstr ""
+"La position gauche-droite pour [code]tap1[/code]. La valeur peut aller de -1 "
+"(complètement à gauche) à 1 (complètement à droite)."
 
 #: doc/classes/AudioEffectDelay.xml
 msgid "If [code]true[/code], [code]tap2[/code] will be enabled."
@@ -12146,6 +12219,8 @@ msgid ""
 "Pan position for [code]tap2[/code]. Value can range from -1 (fully left) to "
 "1 (fully right)."
 msgstr ""
+"La position gauche-droite pour [code]tap2[/code]. La valeur peut aller de -1 "
+"(complètement à gauche) à 1 (complètement à droite)."
 
 #: doc/classes/AudioEffectDistortion.xml
 msgid ""
@@ -12488,15 +12563,22 @@ msgid ""
 "Attenuates frequencies in a narrow band around the [member AudioEffectFilter."
 "cutoff_hz] and cuts frequencies outside of this range."
 msgstr ""
+"Atténue les fréquences dans une bande étroite autour du [member "
+"AudioEffectFilter.cutoff_hz] et coupe les fréquences en dehors de cette "
+"gamme."
 
 #: doc/classes/AudioEffectPanner.xml
 msgid "Adds a panner audio effect to an Audio bus. Pans sound left or right."
 msgstr ""
+"Ajoute un effet audio de balance à un bus audio. Balance les sons à gauche "
+"ou à droite."
 
 #: doc/classes/AudioEffectPanner.xml
 msgid ""
 "Determines how much of an audio signal is sent to the left and right buses."
 msgstr ""
+"Détermine quelle quantité d'un signal audio est envoyé aux bus de gauche et "
+"de droite."
 
 #: doc/classes/AudioEffectPanner.xml
 msgid "Pan position. Value can range from -1 (fully left) to 1 (fully right)."
@@ -12510,6 +12592,9 @@ msgid ""
 "Combines the original signal with a copy that is slightly out of phase with "
 "the original."
 msgstr ""
+"Ajoute un effet audio de phaseur à un bus audio.\n"
+"Combine le signal original avec une copie de l'original légèrement hors "
+"phase."
 
 #: doc/classes/AudioEffectPhaser.xml
 msgid ""
@@ -13334,8 +13419,14 @@ msgstr ""
 "scènes."
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
-msgstr "Bus sur lequel cet audio joue."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
+msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
 msgid ""
@@ -13548,8 +13639,14 @@ msgstr ""
 "ajouté à la scène."
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
-msgstr "Le bus sur lequel cet audio est joué."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
+msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
@@ -13585,7 +13682,7 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid "Sets the absolute maximum of the soundlevel, in decibels."
-msgstr ""
+msgstr "Définit le maximum absolu du niveau sonore, en décibels."
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
@@ -13617,13 +13714,15 @@ msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid "The base sound level unaffected by dampening, in decibels."
-msgstr ""
+msgstr "Le niveau sonore de base non affecté par l'amortissement, en décibels."
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
 "The factor for the attenuation effect. Higher values make the sound audible "
 "over a larger distance."
 msgstr ""
+"Le facteur pour l'effet d'atténuation. Des valeurs plus élevées rendent le "
+"son audible sur une distance plus grande."
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid "Linear dampening of loudness according to distance."
@@ -13654,6 +13753,10 @@ msgid ""
 "but keeps the sound playing at the correct position if the camera leaves and "
 "enters the [AudioStreamPlayer3D]'s [member max_distance] radius."
 msgstr ""
+"Mélanger ce son, même lorsqu'il est hors de portée. Cela augmente "
+"l'utilisation de CPU, mais garde le son à la bonne position de lecture si la "
+"caméra quitte puis entre à nouveau dans le rayon [member max_distance] du "
+"[AudioStreamPlayer3D]."
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
@@ -13661,6 +13764,9 @@ msgid ""
 "will cause the sound to restart if the camera leaves and enters the "
 "[AudioStreamPlayer3D]'s [member max_distance] radius."
 msgstr ""
+"Pause ce son quand il hors de portée. Cela diminue l'utilisation du CPU, "
+"mais cela fera redémarrer le son si la caméra quitte puis entre dans le "
+"rayon [member max_distance] du [AudioStreamPlayer3D]."
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid "Disables doppler tracking."
@@ -14057,6 +14163,8 @@ msgid ""
 "Deprecated, in previous versions it determined the location where lightmaps "
 "were be saved."
 msgstr ""
+"Obsolète, dans les versions précédentes ça déterminait l'emplacement où les "
+"textures de lumière étaient enregistrées."
 
 #: doc/classes/BakedLightmap.xml
 msgid "The calculated light data."
@@ -14094,6 +14202,15 @@ msgid ""
 "lightmap banding even when using the GLES2 backend or if [member "
 "ProjectSettings.rendering/quality/depth/hdr] is [code]false[/code]."
 msgstr ""
+"Si [code]true[/code], enregistre les textures de lumière dans un format de "
+"plage dynamique élevée (type EXR). Si [code]false[/code], enregistre les "
+"textures de lumière dans une image PNG de plage dynamique faible. Ceci peut "
+"être défini à [code]false[/code] pour réduire l'usage du disque, mais les "
+"valeurs lumineuses supérieures à 1.0 seront limitées et vous pouvez voir un "
+"effet de bandes qui apparaissent à cause de cette précision réduite.\n"
+"[b]Note :[/b] Définir [member use_hdr] à [code]true[/code] réduira l'effet "
+"de bandes même sous GLES2 ou quand [member ProjectSettings.rendering/quality/"
+"depth/hdr] est [code]false[/code]."
 
 #: doc/classes/BakedLightmap.xml
 msgid "The lowest bake quality mode. Fastest to calculate."
@@ -14120,6 +14237,9 @@ msgid ""
 "Returns if no viable save path is found. This can happen where an [member "
 "image_path] is not specified or when the save location is invalid."
 msgstr ""
+"Retourne si aucun chemin d'enregistrement invalid n'est trouvé. Cela peut se "
+"produire lorsqu'un [member image_path] n'est pas spécifié ou lorsque "
+"l'emplacement de sauvegarde est invalide."
 
 #: doc/classes/BakedLightmap.xml doc/classes/SpatialMaterial.xml
 msgid "Currently unused."
@@ -14342,6 +14462,8 @@ msgid ""
 "If [code]true[/code], the button is in toggle mode. Makes the button flip "
 "state between pressed and unpressed each time its area is clicked."
 msgstr ""
+"Si [code]true[/code], le bouton est en mode basculement. Fait basculer le "
+"bouton entre les états pressé et non-pressé chaque fois qu'il est cliqué."
 
 #: doc/classes/BaseButton.xml
 msgid "Emitted when the button starts being held down."
@@ -14359,6 +14481,11 @@ msgid ""
 "If you need to know the button's pressed state (and [member toggle_mode] is "
 "active), use [signal toggled] instead."
 msgstr ""
+"Émis quand le bouton est basculé ou pressé. Émis lors de [signal "
+"button_down] si [member action_mode] est [constant ACTION_MODE_BUTTON_PRESS] "
+"et lors de [signal button_up] sinon.\n"
+"Si vous avez besoin de connaître l'état du bouton (et que [member "
+"toggle_mode] est actif), utilisez plutôt [signal toggled]."
 
 #: doc/classes/BaseButton.xml
 msgid ""
@@ -14366,6 +14493,9 @@ msgid ""
 "(only if [member toggle_mode] is active). The new state is contained in the "
 "[code]button_pressed[/code] argument."
 msgstr ""
+"Émis lorsque le bouton a été juste basculé entre les états pressé et normal "
+"(seulement si [member toggle_mode] est actif). Le nouvel état est passé dans "
+"l'argument [code]button_pressed[/code]."
 
 #: doc/classes/BaseButton.xml
 msgid ""
@@ -14606,6 +14736,10 @@ msgid ""
 "[b]Note:[/b] This results in a multiplication by the inverse of the matrix "
 "only if it represents a rotation-reflection."
 msgstr ""
+"Retourne un vecteur transformé (multiplié) par la matrice de base "
+"transposée.\n"
+"[b]Note :[/b] Cela entraîne une multiplication par l'inverse de la matrice "
+"seulement si elle représente une rotation-réflexion."
 
 #: doc/classes/Basis.xml doc/classes/Transform2D.xml
 msgid ""
@@ -14772,6 +14906,10 @@ msgid ""
 "Supports distance fields. For using vector font files like TTF directly, see "
 "[DynamicFont]."
 msgstr ""
+"Rend le texte en utilisant les atlas des texture contenues dans le fichier "
+"[code]*.fnt[/code]. Supporte les champs de distance. Pour utiliser "
+"directement des fichiers de police vectorielles, comme le TTF, voir "
+"[DynamicFont]."
 
 #: doc/classes/BitmapFont.xml
 msgid ""
@@ -14781,6 +14919,11 @@ msgid ""
 "alignment for the character and [code]advance[/code] is the (optional) "
 "advance."
 msgstr ""
+"Ajoute un caractère à la police, où [code]character[/code] est la valeur "
+"Unicode, [code]texture[/code] est l'index de la texture, [code]rect[/code] "
+"est la région de la texture (en pixels !), [code]align[/code] est "
+"l'alignement (optionnel) du caractère et [code]advance[/code] est "
+"l'avancement (optionnel)."
 
 #: doc/classes/BitmapFont.xml
 msgid ""
@@ -14851,6 +14994,17 @@ msgid ""
 "menu option, from the code, you need to iterate over the bones to set their "
 "individual rest poses."
 msgstr ""
+"Utilise une hiérarchie [code]Bone2D[/code] liée à un [Skeleton2D] pour "
+"contrôler et animer d'autres nœuds [Node2D].\n"
+"Vous pouvez utiliser les nœuds [code]Bone2D[/code] et [code]Skeleton2D[/"
+"code] pour animer les maillages 2D créées avec l'éditeur d'UV de Polygon "
+"2D.\n"
+"Chaque os a une transformation de repos [member rest] que vous pouvez "
+"réinitialiser avec [method apply_rest]. Ces poses de repos sont par rapport "
+"au parent de l'os.\n"
+"Si dans l'éditeur vous pouvez définir la pose de repos d'un squelette entier "
+"en utilisant une option de menu, à partir du code, vous devez itérer sur les "
+"os pour définir leurs poses de repos individuelles."
 
 #: doc/classes/Bone2D.xml
 msgid "Stores the node's current transforms in [member rest]."
@@ -15439,6 +15593,9 @@ msgid ""
 "[b]Note:[/b] A position which returns [code]false[/code] may still be "
 "outside the camera's field of view."
 msgstr ""
+"Retourne [code]true[/code] si la position donnée est derrière la caméra.\n"
+"[b]Note :[/b] Une position qui retourne [code]false[/code] peut quand même "
+"être en dehors du champ de vision de la caméra."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15446,6 +15603,10 @@ msgid ""
 "description). If the camera node is outside the scene tree, it will attempt "
 "to become current once it's added."
 msgstr ""
+"Fait que cette caméra devient l'actuelle pour le [Viewport] (voir la "
+"description de la classe). Si le nœud de la caméra est en dehors de "
+"l'arborescence de la scène, il tentera de devenir l'actuel dès qu'il sera "
+"ajouté."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15460,6 +15621,9 @@ msgid ""
 "the [Viewport] rectangle on a plane that is the given [code]z_depth[/code] "
 "distance into the scene away from the camera."
 msgstr ""
+"Retourne le point 3D dans l'espace global qui correspond à la coordonnées 2D "
+"donnée dans le rectangle du [Viewport] sur un plan qui est à la distance "
+"[code]z_depth[/code] donnée dans la scène par rapport à la caméra."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15468,6 +15632,10 @@ msgid ""
 "useful for casting rays in the form of (origin, normal) for object "
 "intersection or picking."
 msgstr ""
+"Retourne la normale dans l'espace global, qui est le résultat de la "
+"projection d'un point sur le rectangle [Viewport] par la projection inverse "
+"de la caméra. Ceci est utile pour lancer des rayons sous la forme (origine, "
+"normale) pour l'intersection ou la sélection d'objets."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15476,6 +15644,10 @@ msgid ""
 "useful for casting rays in the form of (origin, normal) for object "
 "intersection or picking."
 msgstr ""
+"Retourne la position 3D dans l'espace global, qui est le résultat de "
+"projeter un point sur le rectangle [Viewport] par la projection inverse de "
+"la caméra. Ceci est utile pour lancer des rayons sous la forme (origine, "
+"normale) pour l'intersection ou la sélection d'objets."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15620,6 +15792,8 @@ msgid ""
 "The axis to lock during [member fov]/[member size] adjustments. Can be "
 "either [constant KEEP_WIDTH] or [constant KEEP_HEIGHT]."
 msgstr ""
+"L'axe à verrouiller pendant les réglages [member fov] ou [member size]. Peut "
+"être soit [constant KEEP_WIDTH] ou [constant KEEP_HEIGHT]."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15633,6 +15807,9 @@ msgid ""
 "objects' Z distance from the camera's local space scales their perceived "
 "size."
 msgstr ""
+"Le mode de projection de la caméra. Dans le mode [constant "
+"PROJECTION_PERSPECTIVE], la distance des objets dans l'espace local de la "
+"caméra détermine la taille apparante de ces objets."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15640,6 +15817,10 @@ msgid ""
 "orthogonal and frustum modes. Since [member keep_aspect] locks on axis, "
 "[code]size[/code] sets the other axis' size length."
 msgstr ""
+"La taille de la caméra mesurée comme la moitié de la largeur ou de la "
+"hauteur. N'est applicable qu'en modes orthogonal et frustum. Comme [member "
+"keep_aspect] verrouille l'axe, [code]size[/code] fixe la longueur de la "
+"taille sur l'autre axe."
 
 #: doc/classes/Camera.xml
 msgid "The vertical (Y) offset of the camera viewport."
@@ -15658,6 +15839,9 @@ msgid ""
 "Orthogonal projection, also known as orthographic projection. Objects remain "
 "the same size on the screen no matter how far away they are."
 msgstr ""
+"La projection orthogonale, également connue sous le nom de projection "
+"orthographique. Les objets gardent la même taille à l'écran, indépendamment "
+"de leur distance."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15678,6 +15862,10 @@ msgid ""
 "usually the best option for projects running in landscape mode, as wider "
 "aspect ratios will automatically benefit from a wider horizontal FOV."
 msgstr ""
+"Préserve le rapport d'aspect vertical ; également connu sous le nom "
+"d'échelle Hor+. C'est généralement la meilleure option pour les projets en "
+"mode paysage, car les ratios d'aspect plus larges bénéficieront "
+"automatiquement d'un champ de vision horizontal plus large."
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -15778,6 +15966,11 @@ msgid ""
 "or [member Node2D.global_position], as it is affected by the [code]drag[/"
 "code] properties."
 msgstr ""
+"Retourne la [code]position[/code] de la caméra (le point suivi que la caméra "
+"essaye de suivre), par rapport à l'origine.\n"
+"[b]Note :[/b] La valeur retournée n'est pas la même que [member Node2D."
+"position] ou [member Node2D.global_position], car elle est aussi affectée "
+"par les propriétés [code]drag[/code]."
 
 #: doc/classes/Camera2D.xml
 msgid ""
@@ -15786,12 +15979,18 @@ msgid ""
 "[b]Note:[/b] The real [code]position[/code] of the camera may be different, "
 "see [method get_camera_position]."
 msgstr ""
+"Retourne l'emplacement du centre de l'écran de la [Camera2D], par rapport à "
+"l'origine.\n"
+"[b]Note :[/b] La véritable [code]position[/code] de la caméra peut être "
+"différente, voir [method get_camera_position]."
 
 #: doc/classes/Camera2D.xml
 msgid ""
 "Returns the specified margin. See also [member drag_margin_bottom], [member "
 "drag_margin_top], [member drag_margin_left], and [member drag_margin_right]."
 msgstr ""
+"Retourne la marge spécifiée. Voir aussi [member drag_margin_bottom], [member "
+"drag_margin_top], [member drag_margin_left], et [member drag_margin_right]."
 
 #: doc/classes/Camera2D.xml
 msgid ""
@@ -15862,24 +16061,36 @@ msgid ""
 "drag margins. If [code]false[/code], the camera moves horizontally "
 "regardless of margins."
 msgstr ""
+"Si [code]true[/code], la caméra ne bouge que lorsqu'elle atteint les marges "
+"horizontales de glissage. Si [code]false[/code], la caméra se déplace "
+"horizontalement indépendamment des marges."
 
 #: doc/classes/Camera2D.xml
 msgid ""
 "Left margin needed to drag the camera. A value of [code]1[/code] makes the "
 "camera move only when reaching the edge of the screen."
 msgstr ""
+"La marge gauche nécessaire pour pour glisser la caméra. Une valeur de "
+"[code]1[/code] ne déplace la caméra que lorsqu'elle atteint le bord de "
+"l'écran."
 
 #: doc/classes/Camera2D.xml
 msgid ""
 "Right margin needed to drag the camera. A value of [code]1[/code] makes the "
 "camera move only when reaching the edge of the screen."
 msgstr ""
+"La marge droite nécessaire pour pour glisser la caméra. Une valeur de "
+"[code]1[/code] ne déplace la caméra que lorsqu'elle atteint le bord de "
+"l'écran."
 
 #: doc/classes/Camera2D.xml
 msgid ""
 "Top margin needed to drag the camera. A value of [code]1[/code] makes the "
 "camera move only when reaching the edge of the screen."
 msgstr ""
+"La marge supérieure nécessaire pour pour glisser la caméra. Une valeur de "
+"[code]1[/code] ne déplacer la caméra que lorsqu'elle atteint le bord de "
+"l'écran."
 
 #: doc/classes/Camera2D.xml
 msgid ""
@@ -15887,16 +16098,23 @@ msgid ""
 "margins. If [code]false[/code], the camera moves vertically regardless of "
 "margins."
 msgstr ""
+"Si [code]true[/code], la caméra ne bouge que lorsqu'elle atteint les marges "
+"verticales de glissage. Si [code]false[/code], la caméra se déplace "
+"verticalement indépendamment des marges."
 
 #: doc/classes/Camera2D.xml
 msgid ""
 "If [code]true[/code], draws the camera's drag margin rectangle in the editor."
 msgstr ""
+"Si [code]true[/code], dessine le rectangle de la marge de glissage de la "
+"caméra activée dans l'éditeur."
 
 #: doc/classes/Camera2D.xml
 msgid ""
 "If [code]true[/code], draws the camera's limits rectangle in the editor."
 msgstr ""
+"Si [code]true[/code], dessine le rectangle des limites de la caméra activée "
+"dans l'éditeur."
 
 #: doc/classes/Camera2D.xml
 msgid ""
@@ -15966,12 +16184,19 @@ msgid ""
 "not updated in any way if drag margins are enabled and can be used to set "
 "initial offset."
 msgstr ""
+"Le décalage horizontal de la caméra, par rapport aux marges de glissage.\n"
+"[b]Note :[/b] Le décalage H est utilisé uniquement pour forcer le décalage "
+"par rapport aux marges. Elle n'est pas mise à jour même si les marges de "
+"glissage sont activées et peuvent être utilisées pour régler le décalage "
+"initial."
 
 #: doc/classes/Camera2D.xml
 msgid ""
 "The vertical offset of the camera, relative to the drag margins.\n"
 "[b]Note:[/b] Used the same as [member offset_h]."
 msgstr ""
+"Le décalage vertical de la caméra, par rapport aux marges de glissage.\n"
+"[b]Note :[/b] Utilisé de la même manière que [member offset_h]."
 
 #: doc/classes/Camera2D.xml
 msgid "The camera's process callback. See [enum Camera2DProcessMode]."
@@ -16202,6 +16427,10 @@ msgid ""
 "[b]Note:[/b] Many cameras supply YCbCr images which need to be converted in "
 "a shader."
 msgstr ""
+"Cette texture donne accès à la texture de la caméra fournie par "
+"[CameraFeed].\n"
+"[b]Note :[/b] Beaucoup de caméras fournissent des images au format YCbCr qui "
+"doivent être converties dans un shader."
 
 #: doc/classes/CameraTexture.xml
 msgid "The ID of the [CameraFeed] for which we want to display the image."
@@ -16212,13 +16441,15 @@ msgstr ""
 msgid ""
 "Convenience property that gives access to the active property of the "
 "[CameraFeed]."
-msgstr ""
+msgstr "Propriété utile qui donne accès à la propriété active du [CameraFeed]."
 
 #: doc/classes/CameraTexture.xml
 msgid ""
 "Which image within the [CameraFeed] we want access to, important if the "
 "camera image is split in a Y and CbCr component."
 msgstr ""
+"L'image du [CameraFeed] pour laquelle nous voulons accéder, important si "
+"l'image de la caméra est divisée en composants Y et CbCr."
 
 #: doc/classes/CanvasItem.xml
 msgid "Base class of anything 2D."
@@ -16880,6 +17111,8 @@ msgid ""
 "The color applied to textures on this [CanvasItem]. This is not inherited by "
 "children [CanvasItem]s."
 msgstr ""
+"La couleur appliquée aux textures sur ce [CanvasItem]. Cela n'est pas hérité "
+"pour les [CanvasItem] enfants."
 
 #: doc/classes/CanvasItem.xml
 msgid "If [code]true[/code], the object draws behind its parent."
@@ -16934,7 +17167,7 @@ msgid ""
 msgstr ""
 "Émis quand la position ou la taille du [Rect2] a changé, ou lorsqu'une "
 "action a changé ces valeurs là (par exemple en changeant [member Sprite."
-"texture])"
+"texture])."
 
 #: doc/classes/CanvasItem.xml
 msgid "Emitted when the visibility (hidden/visible) changes."
@@ -16945,6 +17178,8 @@ msgid ""
 "Mix blending mode. Colors are assumed to be independent of the alpha "
 "(opacity) value."
 msgstr ""
+"Le mode de mélange. Les couleurs sont supposées être indépendantes de "
+"l'opacité."
 
 #: doc/classes/CanvasItem.xml doc/classes/CanvasItemMaterial.xml
 msgid "Additive blending mode."
@@ -16963,6 +17198,8 @@ msgid ""
 "Mix blending mode. Colors are assumed to be premultiplied by the alpha "
 "(opacity) value."
 msgstr ""
+"Le mode de mélange. Les couleurs sont supposées être prémultipliées par leur "
+"opacité."
 
 #: doc/classes/CanvasItem.xml
 msgid ""
@@ -16976,12 +17213,16 @@ msgid ""
 "The [CanvasItem]'s global transform has changed. This notification is only "
 "received if enabled by [method set_notify_transform]."
 msgstr ""
+"La transformation globale du [CanvasItem] a changé. Cette notification n'est "
+"reçue que si elle est activée par [method set_notify_transform]."
 
 #: doc/classes/CanvasItem.xml
 msgid ""
 "The [CanvasItem]'s local transform has changed. This notification is only "
 "received if enabled by [method set_notify_local_transform]."
 msgstr ""
+"La transformation locale [CanvasItem] a changé. Cette notification n'est "
+"reçue que si elle est activée par [method set_notify_local_transform]."
 
 #: doc/classes/CanvasItem.xml
 msgid "The [CanvasItem] is requested to draw."
@@ -17728,12 +17969,17 @@ msgid ""
 "Returns the value of the integer constant [code]name[/code] of [code]class[/"
 "code] or its ancestry. Always returns 0 when the constant could not be found."
 msgstr ""
+"Retourne la valeur de la constante entière nommée [code]name[/code] dans "
+"[code]class[/code] ou un de ses parents. Retourne toujours 0 si la constante "
+"n'a pas été trouvée."
 
 #: doc/classes/ClassDB.xml
 msgid ""
 "Returns which enum the integer constant [code]name[/code] of [code]class[/"
 "code] or its ancestry belongs to."
 msgstr ""
+"Retourne à quelle énumération la constante entière nommée [code]name[/code] "
+"dans [code]class[/code] ou un de ses parents."
 
 #: doc/classes/ClassDB.xml
 msgid ""
@@ -17825,6 +18071,9 @@ msgid ""
 "Returns whether [code]class[/code] (or its ancestry if [code]no_inheritance[/"
 "code] is [code]false[/code]) has a method called [code]method[/code] or not."
 msgstr ""
+"Retourne si [code]class[/code] (ou un de ses parents si "
+"[code]no_inheritance[/code] est [code]false[/code]) a une méthode nommée "
+"[code]method[/code] ou non."
 
 #: doc/classes/ClassDB.xml
 msgid ""
@@ -17850,6 +18099,8 @@ msgid ""
 "Returns the names of all the classes that directly or indirectly inherit "
 "from [code]class[/code]."
 msgstr ""
+"Retourne le nom de toutes les classes qui héritent directement ou "
+"indirectement de [code]class[/code]."
 
 #: doc/classes/ClassDB.xml
 msgid "Returns the parent class of [code]class[/code]."
@@ -17880,6 +18131,9 @@ msgid ""
 "This node extends [Camera] to add collisions with [Area] and/or "
 "[PhysicsBody] nodes. The camera cannot move through colliding objects."
 msgstr ""
+"Ce nœud étend [Camera] pour ajouter des collisions avec des nœuds [Area] et/"
+"ou [PhysicsBody]. La caméra ne peut pas passer à travers les objets avec "
+"lesquels elle rentre en collision."
 
 #: doc/classes/ClippedCamera.xml
 msgid ""
@@ -18172,6 +18426,10 @@ msgid ""
 "the mouse pointer entering/leaving, and if the mouse is inside it, report "
 "input events. Requires at least one [member collision_layer] bit to be set."
 msgstr ""
+"Si [code]true[/code], cet objet peut être sélectionné. Ces objets peuvent "
+"détecter l'entrée/la sortie du pointeur de la souris sur eux, et si la "
+"souris pointe sur l'objet, signaler par des événements d'entrée. Nécessite "
+"au moins un bit de [member collision_layer] d'être réglé."
 
 #: doc/classes/CollisionObject.xml
 msgid ""
@@ -18227,6 +18485,10 @@ msgid ""
 "[Shape2D]. Connect to the [code]input_event[/code] signal to easily pick up "
 "these events."
 msgstr ""
+"Accepte les [InputEvent] non traités. Nécessite [member input_pickable] "
+"d'être à [code]true[/code]. [code]shape_idx[/code] est l'index de la "
+"[Shape2D] enfant. Connectez-vous au signal [code]input_event[/code] pour "
+"récupérer facilement ces événements."
 
 #: doc/classes/CollisionObject2D.xml
 msgid ""
@@ -18242,6 +18504,9 @@ msgid ""
 "this [CollisionObject2D] will not be reported to collided with "
 "[CollisionObject2D]s."
 msgstr ""
+"Retourne [code]true[/code] si les collisions pour le propriétaire de forme "
+"venant de ce [CollisionObject2D] ne seront pas signalées aux "
+"[CollisionObject2D] entrants en collision."
 
 #: doc/classes/CollisionObject2D.xml
 msgid "Adds a [Shape2D] to the shape owner."
@@ -18250,12 +18515,16 @@ msgstr "Ajoute un [Shape2D] au propriétaire de la forme."
 #: doc/classes/CollisionObject2D.xml
 msgid "Returns the [Shape2D] with the given id from the given shape owner."
 msgstr ""
+"Retourne la [Shape2D] avec l'identifiant donné du propriétaire donné de la "
+"forme."
 
 #: doc/classes/CollisionObject2D.xml
 msgid ""
 "Returns the child index of the [Shape2D] with the given id from the given "
 "shape owner."
 msgstr ""
+"Retourne l'indice de enfant du [Shape2D] avec l'identifiant donné du "
+"propriétaire donné de forme."
 
 #: doc/classes/CollisionObject2D.xml
 msgid "Returns the shape owner's [Transform2D]."
@@ -18267,12 +18536,17 @@ msgid ""
 "originating from this [CollisionObject2D] will not be reported to collided "
 "with [CollisionObject2D]s."
 msgstr ""
+"Si [code]enable[/code] est [code]true[/code], les collisions pour le "
+"propriétaire de forme original de ce [CollisionObject2D] ne seront pas "
+"rapportées aux [CollisionObject2D] entrant en collision."
 
 #: doc/classes/CollisionObject2D.xml
 msgid ""
 "Sets the [code]one_way_collision_margin[/code] of the shape owner identified "
 "by given [code]owner_id[/code] to [code]margin[/code] pixels."
 msgstr ""
+"Définit la marge [code]one_way_collision_margin[/code] du propriétaire de la "
+"forme identifié par [code]owner_id[/code] à [code]margin[/code] pixels."
 
 #: doc/classes/CollisionObject2D.xml
 msgid "Sets the [Transform2D] of the given shape owner."
@@ -18359,12 +18633,20 @@ msgid ""
 "editor. It will not appear in the scene tree at run-time. Creates a [Shape] "
 "for gameplay. Properties modified during gameplay will have no effect."
 msgstr ""
+"Permet d'éditer des sommets de collision sur un plan sélectionné. Peut "
+"également définir une profondeur perpendiculaire à ce plan. Cette classe "
+"n'est disponible que dans l'éditeur. Elle n'apparaîtra pas dans "
+"l'arborescence de la scène quand le jeu est lancé. Crée une [Shape] pour les "
+"mécaniques de jeu. Les propriétés modifiées une fois le jeu lancé n'auront "
+"aucun effet."
 
 #: doc/classes/CollisionPolygon.xml
 msgid ""
 "Length that the resulting collision extends in either direction "
 "perpendicular to its polygon."
 msgstr ""
+"La longueur que la collision résultante s'étend dans la direction "
+"perpendiculaire à son polygone."
 
 #: doc/classes/CollisionPolygon.xml
 msgid "If [code]true[/code], no collision will be produced."
@@ -18375,6 +18657,8 @@ msgid ""
 "The collision margin for the generated [Shape]. See [member Shape.margin] "
 "for more details."
 msgstr ""
+"La marge de collision pour la [Shape] générée. Voir [member Shape.margin] "
+"pour plus d'informations."
 
 #: doc/classes/CollisionPolygon.xml
 msgid ""
@@ -18385,6 +18669,12 @@ msgid ""
 "temporary variable and make changes before reassigning the [code]polygon[/"
 "code] member."
 msgstr ""
+"Un tableau de sommets qui définissent le polygone.\n"
+"[b]Note :[/b] La valeur retournée est une copie de l'original. Les méthodes "
+"qui modifie la taille ou les propriétés de la valeur de retour n'affecteront "
+"pas le polygone d'origine. Pour modifier les propriétés du polygone, "
+"assignez-le à une variable temporaire et faites des changements avant de le "
+"réassigner au membre [code]polygon[/code]."
 
 #: doc/classes/CollisionPolygon2D.xml
 msgid "Defines a 2D collision polygon."
@@ -18395,10 +18685,14 @@ msgid ""
 "Provides a 2D collision polygon to a [CollisionObject2D] parent. Polygons "
 "can be drawn in the editor or specified by a list of vertices."
 msgstr ""
+"Fournit un polygone de collision 2D à un parent [CollisionObject2D]. Les "
+"polygones peuvent être dessinés manuellement dans l'éditeur ou spécifiés par "
+"une liste de sommets."
 
 #: doc/classes/CollisionPolygon2D.xml
 msgid "Collision build mode. Use one of the [enum BuildMode] constants."
 msgstr ""
+"Le mode d'assemblage. Utilisez l'une des constantes de [enum BuildMode]."
 
 #: doc/classes/CollisionPolygon2D.xml
 msgid "If [code]true[/code], no collisions will be detected."
@@ -18411,6 +18705,11 @@ msgid ""
 "[b]Note:[/b] This property has no effect if this [CollisionPolygon2D] is a "
 "child of an [Area2D] node."
 msgstr ""
+"Si [code]true[/code], seuls les bords qui font face, par rapport à la "
+"rotation du [CollisionPolygon2D], entreront en collision avec d'autres "
+"objets.\n"
+"[b]Note :[/b] Cette propriété n'a aucun effet si cette [CollisionPolygon2D] "
+"est un enfant d'un nœud [Area2D]."
 
 #: doc/classes/CollisionPolygon2D.xml
 msgid ""
@@ -18418,6 +18717,9 @@ msgid ""
 "the shape thicker, and work better for colliders that enter the polygon at a "
 "high velocity."
 msgstr ""
+"La marge (en pixels) utilisée pour une collision à sens unique. Des valeurs "
+"plus élevées rendront la forme plus épaisse, et fonctionneront mieux pour "
+"les objets entrant en collision quand ils vont à une vitesse élevée."
 
 #: doc/classes/CollisionPolygon2D.xml
 msgid ""
@@ -19622,11 +19924,18 @@ msgid ""
 "in the color picker and the user will be able to select them.\n"
 "[b]Note:[/b] The presets list is only for [i]this[/i] color picker."
 msgstr ""
+"Ajoute la couleur donnée à une liste de pré-réglages de couleur. Les pré-"
+"réglages sont affichés dans le sélectionneur de couleurs que l'utilisateur "
+"pourra sélectionner.\n"
+"[b]Note :[/b] La liste des pré-réglages est seulement pour [i]ce[/i] "
+"sélectionneur de couleur."
 
 #: doc/classes/ColorPicker.xml
 msgid ""
 "Removes the given color from the list of color presets of this color picker."
 msgstr ""
+"Retire la couleur donnée de la liste des pré-réglages de couleur de ce "
+"sélectionneur de couleur."
 
 #: doc/classes/ColorPicker.xml
 msgid "Returns the list of colors in the presets of the color picker."
@@ -19643,6 +19952,10 @@ msgid ""
 "mouse button, otherwise it will apply immediately even in mouse motion event "
 "(which can cause performance issues)."
 msgstr ""
+"Si [code]true[/code], la couleur ne s'appliquera que quand l'utilisateur "
+"relâche le bouton de la souris, sinon elle s'appliquera immédiatement en "
+"suivant le déplacement de la souris (ce qui peut causer des problèmes de "
+"performance)."
 
 #: doc/classes/ColorPicker.xml
 #, fuzzy
@@ -19655,6 +19968,9 @@ msgid ""
 "sliders.\n"
 "[b]Note:[/b] Cannot be enabled if raw mode is on."
 msgstr ""
+"Si [code]true[/code], permet de modifier la couleur avec des curseurs teinte/"
+"saturation/valeur.\n"
+"[b]Note :[/b] Ne peut être activé si le mode brut est activé."
 
 #: doc/classes/ColorPicker.xml
 msgid "If [code]true[/code], the \"add preset\" button is enabled."
@@ -19722,10 +20038,12 @@ msgid ""
 "The indicator used to signalize that the color value is outside the 0-1 "
 "range."
 msgstr ""
+"L'indicateur utilisé pour signaler que la valeur de couleur est en dehors de "
+"l'intervalle 0-1."
 
 #: doc/classes/ColorPicker.xml
 msgid "The icon for the screen color picker button."
-msgstr ""
+msgstr "L'icône pour le bouton de sélecteur de couleurs."
 
 #: doc/classes/ColorPickerButton.xml
 msgid "Button that pops out a [ColorPicker]."
@@ -20161,18 +20479,25 @@ msgid ""
 "Deletes the specified section along with all the key-value pairs inside. "
 "Raises an error if the section does not exist."
 msgstr ""
+"Supprime la section spécifiée ainsi que toutes ses paires valeur-clé avec. "
+"Affiche une erreur si la section n'existe pas."
 
 #: doc/classes/ConfigFile.xml
 msgid ""
 "Deletes the specified key in a section. Raises an error if either the "
 "section or the key do not exist."
 msgstr ""
+"Supprime la clé spécifiée dans une section. Affiche une erreur si la section "
+"ou la clé n'existe pas."
 
 #: doc/classes/ConfigFile.xml
 msgid ""
 "Returns an array of all defined key identifiers in the specified section. "
 "Raises an error and returns an empty array if the section does not exist."
 msgstr ""
+"Retourne un tableau de tous les identifiants des clés définis dans la "
+"section spécifiée. Affiche une erreur et retourne un tableau vide si la "
+"section n'existe pas."
 
 #: doc/classes/ConfigFile.xml
 msgid "Returns an array of all defined section identifiers."
@@ -20185,6 +20510,10 @@ msgid ""
 "[code]default[/code] value. If [code]default[/code] is not specified or set "
 "to [code]null[/code], an error is also raised."
 msgstr ""
+"Retourne l'actuelle valeur pour la section et la clé spécifiées. Si la "
+"section ou la clé n'existent pas, la méthode retourne la valeur du paramètre "
+"[code]default[/code]. Si [code]default[/code] n'est pas spécifié ou défini à "
+"[code]null[/code], une erreur est affichée."
 
 #: doc/classes/ConfigFile.xml
 msgid "Returns [code]true[/code] if the specified section exists."
@@ -20202,6 +20531,10 @@ msgid ""
 "on.\n"
 "Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
 msgstr ""
+"Charge le fichier de configuration spécifié en paramètre. Le contenu du "
+"fichier est interprété et chargé dans l'objet [ConfigFile] sur lequel la "
+"méthode a été appelée.\n"
+"Retourne un des codes [enum Error] ([code]OK[/code] en cas de succès)."
 
 #: doc/classes/ConfigFile.xml
 msgid ""
@@ -20210,6 +20543,11 @@ msgid ""
 "the [ConfigFile] object which the method was called on.\n"
 "Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
 msgstr ""
+"Charge le fichier de configuration crypté spécifié en paramètre, en "
+"utilisant la clé [code]key[/code] fournie pour le décrypter. Le contenu du "
+"fichier est interprété et chargé dans l'objet [ConfigFile] sur lequel la "
+"méthode a été appelée.\n"
+"Retourne un des codes [enum Error] ([code]OK[/code] en cas de succès)."
 
 #: doc/classes/ConfigFile.xml
 msgid ""
@@ -20279,6 +20617,10 @@ msgid ""
 "code] value deletes the specified key if it exists, and deletes the section "
 "if it ends up empty once the key has been removed."
 msgstr ""
+"Attribue une valeur à la clé spécifiée de la section spécifiée. Si la "
+"section ou la clé n'existe pas, elles sont créées. Passer une valeur "
+"[code]null[/code] supprime la clé spécifiée si elle existe, et supprime la "
+"section si elle est vide une fois que la clé a été supprimée."
 
 #: doc/classes/ConfirmationDialog.xml
 msgid "Dialog for confirmation of actions."
@@ -20309,6 +20651,10 @@ msgid ""
 "may cause a crash. If you wish to hide it or any of its children, use their "
 "[member CanvasItem.visible] property."
 msgstr ""
+"Retourne le bouton annuler.\n"
+"[b]Avertissement :[/b] Il s'agit d'un nœud interne requis, le retirer et le "
+"libérer peut causer un plantage. Si vous voulez le cacher lui ou un de ses "
+"enfants, utilisez la propriété [member CanvasItem.visible]."
 
 #: doc/classes/Container.xml
 msgid "Base node for containers."
@@ -20320,18 +20666,26 @@ msgid ""
 "automatically arranges them in a certain way.\n"
 "A Control can inherit this to create custom container classes."
 msgstr ""
+"Le nœud de base pour les conteneurs. Un [Container] contient d'autres "
+"contrôles et les arrange automatiquement d'une certaine manière.\n"
+"Un Control peut en hériter pour créer des classes de conteneur qui arrange "
+"les contrôles enfants de manière personnalisée."
 
 #: doc/classes/Container.xml
 msgid ""
 "Fit a child control in a given rect. This is mainly a helper for creating "
 "custom container classes."
 msgstr ""
+"Ajuste un contrôle enfant dans un rectangle donné. Il s'agit principalement "
+"d'une aide pour créer des classes de conteneurs personnalisées."
 
 #: doc/classes/Container.xml
 msgid ""
 "Queue resort of the contained children. This is called automatically anyway, "
 "but can be called upon request."
 msgstr ""
+"Ajoute un commande de tri pour les contrôles enfants. Ceci est appelé "
+"automatiquement de tous les cas, mais peut être appelé sur demande."
 
 #: doc/classes/Container.xml
 msgid "Emitted when sorting the children is needed."
@@ -20341,12 +20695,17 @@ msgstr "Émis quand le tri des enfants est nécessaire."
 msgid ""
 "Notification for when sorting the children, it must be obeyed immediately."
 msgstr ""
+"La notification pour le tri des enfants, à laquelle faut l'obéir "
+"immédiatement."
 
 #: doc/classes/Control.xml
 msgid ""
 "All user interface nodes inherit from Control. A control's anchors and "
 "margins adapt its position and size relative to its parent."
 msgstr ""
+"Tous les nœuds d'interface utilisateur héritent de Control. Les ancres et "
+"les marges des contrôles adaptent leur position et leur taille par rapport à "
+"son parent."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20433,7 +20792,7 @@ msgstr "Galerie des nœuds de contrôle"
 
 #: doc/classes/Control.xml
 msgid "All GUI Demos"
-msgstr ""
+msgstr "Toutes les démos d'interface"
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20443,6 +20802,13 @@ msgid ""
 "Similar to [member rect_clip_content], but doesn't affect visibility.\n"
 "If not overridden, defaults to [code]false[/code]."
 msgstr ""
+"Méthode virtuelle à surcharger par l'utilisateur. Retourne si [méthode "
+"gui_input] ne doit pas être appelé pour les contrôles enfants en dehors du "
+"rectangle englobant du contrôle. L'entrée sera limitée au Rect de ce "
+"[Control]. Similaire à [member rect_clip_content], mais n'affecte pas la "
+"visibilité.\n"
+"Si la méthode n'est pas surchargée, la valeur par défaut retournée est "
+"[code]false[/code]."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20804,6 +21170,12 @@ msgid ""
 "The methods [method can_drop_data] and [method drop_data] must be "
 "implemented on controls that want to receive drop data."
 msgstr ""
+"Force le glissage et contourne [method get_drag_data] et [method "
+"set_drag_preview] en passant [code]data[/code] et [code]preview[/code]. Le "
+"glissage va commencer même si la souris n'est ni sur, ni appuyé sur ce "
+"contrôle.\n"
+"Les méthodes [method can_drop_data] et [method drop_data] doivent être "
+"implémentées pour les contrôles qui veulent recevoir ces données de glissage."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -20896,6 +21268,8 @@ msgid ""
 "Returns the mouse cursor shape the control displays on mouse hover. See "
 "[enum CursorShape]."
 msgstr ""
+"Retourne le curseur de la souris que le contrôle affiche quand la souris le "
+"survole. Voir [enum CursorShape]."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -21039,6 +21413,10 @@ msgid ""
 "[Theme] has a valid [member Theme.default_font] value.\n"
 "See [method get_color] for details."
 msgstr ""
+"Retourne la police par défaut de la première correspondance [Theme] trouvée "
+"dans l'arborescence si ce [Theme] a une valeur valide pour [member Theme."
+"default_font].\n"
+"Voir [method get_color] pour plus de détails."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -21203,6 +21581,10 @@ msgid ""
 "[code]theme_type[/code].\n"
 "See [method get_color] for details."
 msgstr ""
+"Retourne [code]true[/code] s'il y a une correspondance [Theme] dans "
+"l'arborescence qui a un élément de la boîte de style avec le code spécifié "
+"[code]name[/code] et [code]theme_type[/code].\n"
+"Voir [method get_color] pour plus de détails."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -21231,11 +21613,17 @@ msgid ""
 "changed. Setting [member rect_min_size] directly calls this method "
 "automatically."
 msgstr ""
+"Invalide le cache de taille de ce nœud et des nœuds parents jusqu'à la "
+"racine. Prévu pour être utilisé avec [method get_minimum_size] quand la "
+"valeur de retour est changée. Définir [member rect_min_size] appelle cette "
+"méthode automatiquement."
 
 #: doc/classes/Control.xml
 msgid ""
 "Give up the focus. No other control will be able to receive keyboard input."
 msgstr ""
+"Relâche le focus. Aucun autre contrôle ne pourra recevoir les entrées du "
+"clavier."
 
 #: doc/classes/Control.xml
 #, fuzzy
@@ -21304,12 +21692,18 @@ msgid ""
 "code] argument and automatic update of margin, it allows to set the margin "
 "offset yourself (see [method set_margin])."
 msgstr ""
+"Fonctionne comme [method set_anchor], mais au lieu de l'argument "
+"[code]keep_margin[/code] et de la mise à jour automatique de la marge, ça "
+"permet de définir la marge de décalage par vous-même (voir [method "
+"set_margin])."
 
 #: doc/classes/Control.xml
 msgid ""
 "Sets both anchor preset and margin preset. See [method set_anchors_preset] "
 "and [method set_margins_preset]."
 msgstr ""
+"Définit à la fois le préréglage de l'ancre et de la marge. Voir [method "
+"set_anchors_preset] et [method set_margins_preset]."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -21523,6 +21917,15 @@ msgid ""
 "If [code]exclusive[/code] is [code]true[/code], other controls will not "
 "receive input and clicking outside this control will not close it."
 msgstr ""
+"Affiche un contrôle en tant que modal. Le contrôle doit être une sous-"
+"fenêtre. Les contrôles de modal capturent les signaux d'entrée jusqu'à ce "
+"que la zone située à l'extérieur soit accessible. Lorsqu'un contrôle modal "
+"perd le focus, ou que la touche échap est pressée, il disparait "
+"automatiquement. Les contrôles de modal sont largement utilisés pour les "
+"dialogues surgissants (popup) et les menus.\n"
+"Si [code]exclusif[/code] est [code]true[/code], les autres contrôles ne "
+"recevront pas les entrées, et cliquer à l'extérieur de ce contrôle ne le "
+"fermera pas."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -21584,6 +21987,9 @@ msgid ""
 "The focus access mode for the control (None, Click or All). Only one Control "
 "can be focused at the same time, and it will receive keyboard signals."
 msgstr ""
+"Le mode de focus du contrôle (aucun, clic ou tous). Un seul contrôle peut "
+"avoir le focus à un moment donné, et il recevra des signaux des touches du "
+"clavier appuyées."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -22188,6 +22594,9 @@ msgid ""
 "beam pointer has a shape similar to \"I\". It tells the user they can "
 "highlight or insert text."
 msgstr ""
+"Affiche le curseur de la souris en forme de I lorsque l'utilisateur survole "
+"le nœud. Le pointeur en I a une forme semblable à un \"I\". Il signale à "
+"l'utilisateur qu'il peut insérer ou surligner du texte."
 
 #: doc/classes/Control.xml
 msgid ""
@@ -22675,6 +23084,15 @@ msgid ""
 "uses a more complex method of collision detection, and a convex one forces "
 "itself to be convex in order to speed up collision detection."
 msgstr ""
+"Forme polygone convexe pour la physique 2D. Un polygone convexe, quelle que "
+"soit sa forme, est décomposé en interne par d'autant de polygones convexes "
+"que nécessaire pour assurer que toutes les collisions sont toujours "
+"effectués sur les polygones convexes (ce qui sont plus rapide à vérifier).\n"
+"La principale différence entre un [ConvexPolygonShape2D] et un "
+"[ConcavePolygonShape2D] est qu'un polygone concave suppose toujours qu'il "
+"est concave et utilise une méthode plus complexe pour la détection des "
+"collisions, alors qu'un polygone convexe suppose toujours qu'il est convexe "
+"pour accélérer la détection des collisions."
 
 #: doc/classes/ConvexPolygonShape2D.xml
 msgid ""
@@ -22682,6 +23100,10 @@ msgid ""
 "points] property using the convex hull algorithm. Removing all unneeded "
 "points. See [method Geometry.convex_hull_2d] for details."
 msgstr ""
+"Basé sur l'ensemble des points fournis, cela crée et définit la propriété "
+"[member points] en utilisant l'algorithme de découpage convexe. Ça enlève "
+"aussi tous les points inutiles. Voir [method Geometry.convex_hull_2d] pour "
+"plus de détails."
 
 #: doc/classes/ConvexPolygonShape2D.xml
 msgid ""
@@ -22690,6 +23112,10 @@ msgid ""
 "[method set_point_cloud] to generate a convex hull shape from concave shape "
 "points."
 msgstr ""
+"La liste des sommets du polygone. Peut être dans le sens horaire ou dans le "
+"sens anti-horaire. Ne définissez cette propriété qu'avec des points d'une "
+"forme convexe, et utilisez [method set_point_cloud] pour générer une forme "
+"convexe à partir de points d'une forme concave."
 
 #: doc/classes/CPUParticles.xml
 msgid "CPU-based 3D particle emitter."
@@ -22704,12 +23130,22 @@ msgid ""
 "[b]Note:[/b] Unlike [Particles], the visibility rect is generated on-the-fly "
 "and doesn't need to be configured by the user."
 msgstr ""
+"Un nœud pour les particules 3D fonctionnant sur le CPU utilisé pour créer "
+"une grande variété d'effets de particules.\n"
+"Voir aussi [Particles], qui fournit la même fonctionnalité mais avec "
+"l'accélération matérielle (via GPU), mais ne peut pas fonctionner sur des "
+"appareils plus anciens.\n"
+"[b]Note :[/b] Contrairement aux [Particles], le rect de visibilité est "
+"généré à lors de émission et n'a pas besoin d'être configuré par "
+"l'utilisateur."
 
 #: doc/classes/CPUParticles.xml
 msgid ""
 "Sets this node's properties to match a given [Particles] node with an "
 "assigned [ParticlesMaterial]."
 msgstr ""
+"Génère les propriétés de ce nœud pour correspondre à un nœud [Particules] "
+"avec en plus un nœud assigné [ParticlesMaterial]."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid "Returns the base value of the parameter specified by [enum Parameter]."
@@ -22767,6 +23203,11 @@ msgid ""
 "therefore removing all particles that were already emitted before changing "
 "[member amount]."
 msgstr ""
+"Le nombre de particules émises dans un cycle d'émission (correspondant à la "
+"durée [member lifetime]).\n"
+"[b]Note :[/b] Changer [member amount] réinitialisera l'émission des "
+"particules, supprimant ainsi toutes les particules déjà émises avant de "
+"changer [member amount]."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid "Initial rotation applied to each particle, in degrees."
@@ -22838,6 +23279,9 @@ msgid ""
 "[SpatialMaterial] make sure to set [member SpatialMaterial."
 "vertex_color_use_as_albedo] to [code]true[/code]."
 msgstr ""
+"La couleur initiale de chaque particule. Pour utiliser cette couleur dans un "
+"[SpatialMaterial], assurez-vous de définir [membrer SpatialMaterial."
+"vertex_color_use_as_albedo] à [code]true[/code]."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/ParticlesMaterial.xml
@@ -22845,6 +23289,8 @@ msgid ""
 "Each particle's initial color will vary along this [GradientTexture] "
 "(multiplied with [member color])."
 msgstr ""
+"La couleur initiale de chaque particule qui varie suivant la "
+"[GradientTexture] (multipliée avec [member color])."
 
 #: doc/classes/CPUParticles.xml doc/classes/ParticlesMaterial.xml
 msgid ""
@@ -22978,6 +23424,10 @@ msgid ""
 "the value to 2 will make the particles render at 2 frames per second. Note "
 "this does not slow down the particle system itself."
 msgstr ""
+"Le nombre de trames du système de particules est fixé à une valeur. Par "
+"exemple, changer la valeur à 2 rendra les particules à 2 trames par seconde. "
+"Notez que cela ne ralentit pas le système de particules lui-même juste "
+"l'affichage final."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/ParticlesMaterial.xml
@@ -23001,6 +23451,8 @@ msgid ""
 "Amount of [member spread] in Y/Z plane. A value of [code]1[/code] restricts "
 "particles to X/Z plane."
 msgstr ""
+"La quantité d'éparpillement [member spread] dans le plan Y/Z. Une valeur de "
+"[code]1[/code] limite les particules au plan X/Z."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/Particles.xml doc/classes/Particles2D.xml
@@ -23008,6 +23460,8 @@ msgid ""
 "If [code]true[/code], results in fractional delta calculation which has a "
 "smoother particles display effect."
 msgstr ""
+"Si [code]true[/code], utilise un calcul d'étape fractionnelle qui permet "
+"affichage plus lisse des particules."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/ParticlesMaterial.xml
@@ -23034,6 +23488,8 @@ msgid ""
 "Initial velocity magnitude for each particle. Direction comes from [member "
 "spread] and the node's orientation."
 msgstr ""
+"La magnitude de la vitesse initiale de chaque particule. L'orientation "
+"dépend de [member spread] et de l'orientation du nœud."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/ParticlesMaterial.xml
@@ -23055,6 +23511,8 @@ msgstr "Facteur d'aléatoire de la durée de vie d'une particule."
 msgid ""
 "Linear acceleration applied to each particle in the direction of motion."
 msgstr ""
+"L'accélération linéaire appliquée à chaque particule dans la direction du "
+"mouvement."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid "Each particle's linear acceleration will vary along this [Curve]."
@@ -23073,6 +23531,9 @@ msgid ""
 "If [code]true[/code], particles use the parent node's coordinate space. If "
 "[code]false[/code], they use global coordinates."
 msgstr ""
+"Si [code]true[/code], les particules utilisent l'espace de coordonnées du "
+"parent du nœud. Si [code]false[/code], ils utilisent des coordonnées "
+"globales."
 
 #: doc/classes/CPUParticles.xml
 msgid ""
@@ -23088,6 +23549,9 @@ msgid ""
 "If [code]true[/code], only one emission cycle occurs. If set [code]true[/"
 "code] during a cycle, emission will stop at the cycle's end."
 msgstr ""
+"Si [code]true[/code], un seul cycle d'émission se produit. Si définit à "
+"[code]true[/code] pendant un cycle, l'émission s'arrêtera à la fin de ce "
+"cycle."
 
 #: doc/classes/CPUParticles.xml
 msgid ""
@@ -23097,6 +23561,11 @@ msgid ""
 "This property is only available when [member flag_disable_z] is [code]true[/"
 "code]."
 msgstr ""
+"La vitesse orbitale appliquée à chaque particule. Fait tourner les "
+"particules autour d'origine sur le plan XY local. Spécifié en nombre de "
+"rotations complètes autour de l'origine par seconde.\n"
+"Cette propriété est uniquement disponible lorsque [member flag_disable_z] "
+"est [code]true[/code]."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid "Each particle's orbital velocity will vary along this [Curve]."
@@ -23113,6 +23582,8 @@ msgstr "Facteur d'aléatoire de la vélocité orbitale."
 #: doc/classes/Particles2D.xml
 msgid "Particle system starts as if it had already run for this many seconds."
 msgstr ""
+"Le système de particules démarre comme s'il avait déjà commencé depuis "
+"plusieurs secondes."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/ParticlesMaterial.xml
@@ -23159,6 +23630,8 @@ msgid ""
 "Particle system's running speed scaling ratio. A value of [code]0[/code] can "
 "be used to pause the particles."
 msgstr ""
+"Le facteur de vitesse du système de particules. Une valeur de [code]0[/code] "
+"peut être utilisée pour arrêter les particules."
 
 #: doc/classes/CPUParticles.xml
 msgid ""
@@ -23176,6 +23649,9 @@ msgid ""
 "perpendicular to the particle's velocity giving the particles a swirling "
 "motion."
 msgstr ""
+"L'accélération tangentielle appliquée à chaque particule. Elle est "
+"perpendiculaire à la vitesse de la particule, ce qui donne aux particules un "
+"mouvement de glissement."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid "Each particle's tangential acceleration will vary along this [Curve]."
@@ -23209,30 +23685,40 @@ msgid ""
 "Use with [method set_param], [method set_param_randomness], and [method "
 "set_param_curve] to set initial velocity properties."
 msgstr ""
+"À utiliser avec [method set_param], [method set_param_randomness], et "
+"[method set_param_curve] pour définir les propriétés de vitesse initiale."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid ""
 "Use with [method set_param], [method set_param_randomness], and [method "
 "set_param_curve] to set angular velocity properties."
 msgstr ""
+"À utiliser avec [method set_param], [method set_param_randomness], et "
+"[method set_param_curve] pour définir les propriétés de vitesse angulaire."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid ""
 "Use with [method set_param], [method set_param_randomness], and [method "
 "set_param_curve] to set orbital velocity properties."
 msgstr ""
+"À utiliser avec [method set_param], [method set_param_randomness], et "
+"[method set_param_curve] pour définir les propriétés de vitesse orbitale."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid ""
 "Use with [method set_param], [method set_param_randomness], and [method "
 "set_param_curve] to set linear acceleration properties."
 msgstr ""
+"À utiliser avec [method set_param], [method set_param_randomness], et "
+"[method set_param_curve] pour définir les propriétés d'accélération linéaire."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid ""
 "Use with [method set_param], [method set_param_randomness], and [method "
 "set_param_curve] to set radial acceleration properties."
 msgstr ""
+"À utiliser avec [method set_param], [method set_param_randomness], et "
+"[method set_param_curve] pour définir les propriétés d'accélération radiale."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid ""
@@ -23336,6 +23822,9 @@ msgid ""
 "emission_points]. Particle color will be modulated by [member "
 "emission_colors]."
 msgstr ""
+"Les particules seront émises à une position choisie au hasard parmi les "
+"points [member emission_points]. La couleur des particules sera modulée par "
+"[member emission_colors]."
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 msgid ""
@@ -23344,6 +23833,10 @@ msgid ""
 "[member emission_normals]. Particle color will be modulated by [member "
 "emission_colors]."
 msgstr ""
+"Les particules seront émises à une position choisie au hasard parmi [member "
+"emission_points]. La vitesse et la rotation des particules seront "
+"déterminées en fonction de [member emission_normals]. La couleur des "
+"particules sera modulée par [member emission_colors]."
 
 #: doc/classes/CPUParticles.xml doc/classes/ParticlesMaterial.xml
 msgid "Particles will be emitted in a ring or cylinder."
@@ -23367,30 +23860,45 @@ msgid ""
 "[b]Note:[/b] Unlike [Particles2D], the visibility rect is generated on-the-"
 "fly and doesn't need to be configured by the user."
 msgstr ""
+"Nœud de particules 2D calculées par le CPU pour créer une variété de "
+"systèmes et d'effets de particules.\n"
+"Voir aussi [Particles2D], qui fournit la même fonctionnalité mais en "
+"utilisant l'accélération matérielle, mais ne peut pas fonctionner sur des "
+"appareils plus anciens.\n"
+"[b]Note :[/b] Contrairement [Particles2D], le rectangle de visibilité est "
+"généré à l'émission et n'a donc pas besoin d'être définit par l'utilisateur."
 
 #: doc/classes/CPUParticles2D.xml
 msgid ""
 "Sets this node's properties to match a given [Particles2D] node with an "
 "assigned [ParticlesMaterial]."
 msgstr ""
+"Définit les propriétés de ce nœud pour correspondre à au nœud [Particles2D] "
+"spécifié, en incluant un nœud [ParticlesMaterial]."
 
 #: doc/classes/CPUParticles2D.xml
 msgid ""
 "Each particle's initial color. If [member texture] is defined, it will be "
 "multiplied by this color."
 msgstr ""
+"La couleur initiale de chaque particule. Si [member texture] est défini, les "
+"particules sont multipliées par cette couleur."
 
 #: doc/classes/CPUParticles2D.xml
 msgid ""
 "Each particle's color will vary along this [Gradient] (multiplied with "
 "[member color])."
 msgstr ""
+"Chaque couleur de particle varie selon ce [Gradient] (multiplié avec [member "
+"color])."
 
 #: doc/classes/CPUParticles2D.xml
 msgid ""
 "The rectangle's extents if [member emission_shape] is set to [constant "
 "EMISSION_SHAPE_RECTANGLE]."
 msgstr ""
+"Le rectangle d'émission si [member emission_shape] est [constant "
+"EMISSION_SHAPE_RECTANGLE]."
 
 #: doc/classes/CPUParticles2D.xml
 msgid ""
@@ -23407,6 +23915,10 @@ msgid ""
 "the value to 2 will make the particles render at 2 frames per second. Note "
 "this does not slow down the simulation of the particle system itself."
 msgstr ""
+"Le nombre de trames du système de particules est fixé à une valeur. Par "
+"exemple, changer la valeur à 2 rendra les particules à 2 trames par seconde. "
+"Notez que cela ne ralentit pas le système de particules lui-même juste "
+"l'affichage final."
 
 #: doc/classes/CPUParticles2D.xml doc/classes/Particles2D.xml
 msgid ""
@@ -23416,12 +23928,21 @@ msgid ""
 "Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
 "a comparison of normal map coordinates expected by popular engines."
 msgstr ""
+"La texture de normale à utiliser pour la propriété [member texture].\n"
+"[b]Note :[/b] Godot s'attend à ce que la texture de normale utilise les "
+"coordonnées +X, -Y, et +Z. Voir [url=http://wiki.polycount.com/wiki/"
+"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]cette page[/url] "
+"pour une comparaison des coordonnées des textures de normales attendues par "
+"les principaux moteurs de jeu."
 
 #: doc/classes/CPUParticles2D.xml
 msgid ""
 "Orbital velocity applied to each particle. Makes the particles circle around "
 "origin. Specified in number of full rotations around origin per second."
 msgstr ""
+"La vitesse orbitale appliquée à chaque particule. Fait tourner les "
+"particules autour de l'origine. Spécifié en nombre de rotations complètes "
+"autour de l'origine par seconde."
 
 #: doc/classes/CPUParticles2D.xml doc/classes/ParticlesMaterial.xml
 msgid ""
@@ -23590,7 +24111,7 @@ msgid ""
 "certificates and passed to [method StreamPeerSSL.accept_stream]."
 msgstr ""
 "Génère une [CryptoKey] RSA qui peut être utilisé pour créer des certificats "
-"autosignés et transmis à [method StreamPeerSSL.accept_stream]"
+"autosignés et transmis à [method StreamPeerSSL.accept_stream]."
 
 #: doc/classes/Crypto.xml
 msgid ""
@@ -23639,6 +24160,12 @@ msgid ""
 "Currently, only [constant HashingContext.HASH_SHA256] and [constant "
 "HashingContext.HASH_SHA1] are supported."
 msgstr ""
+"Génère un résumé [url=https://en.wikipedia.org/wiki/HMAC]HMAC[/url] de "
+"[code]msg[/code] à partir de la clé [code]key[/code]. Le paramètre "
+"[code]hash_type[/code] est l'algorithme de hachage utilisé pour les hachages "
+"intérieurs et extérieurs.\n"
+"Actuellement, seuls les algorithmes [constant HashingContext.HASH_SHA256] et "
+"[constant HashingContext.HASH_SHA1] sont supportés."
 
 #: doc/classes/Crypto.xml
 msgid ""
@@ -23668,6 +24195,12 @@ msgid ""
 "Crypto.generate_self_signed_certificate] and as private key in [method "
 "StreamPeerSSL.accept_stream] along with the appropriate certificate."
 msgstr ""
+"La classe CryptoKey représente une clé cryptographique. Les clés peuvent "
+"être chargées et sauvegardées comme toute autre [Resource].\n"
+"Elles peuvent être utilisées pour générer un certicat [X509Certificate] "
+"autosigné avec [method Crypto.generate_self_signed_certificate] et comme clé "
+"privée dans [method StreamPeerSSL.accept_stream] avec le certificat "
+"approprié."
 
 #: doc/classes/CryptoKey.xml
 msgid ""
@@ -23684,12 +24217,19 @@ msgid ""
 "[b]Note:[/b] [code]path[/code] should be a \"*.pub\" file if "
 "[code]public_only[/code] is [code]true[/code], a \"*.key\" file otherwise."
 msgstr ""
+"Charge la clé à [code]path[/code]. Si [code]public_only[/code] est "
+"[code]true[/code], seule la clé publique sera chargée.\n"
+"[b]Note :[/b] [code]path[/code] doit être un fichier \"*.pub\" si "
+"[code]public_only[/code] est [code]true[/code], et un fichier \"*.key\" "
+"sinon."
 
 #: doc/classes/CryptoKey.xml
 msgid ""
 "Loads a key from the given [code]string[/code]. If [code]public_only[/code] "
 "is [code]true[/code], only the public key will be loaded."
 msgstr ""
+"Charge une clé depuis la [code]string[/code] donnée. Si [code]public_only[/"
+"code] est [code]true[/code], seule la clé publique sera chargée."
 
 #: doc/classes/CryptoKey.xml
 msgid ""
@@ -23698,12 +24238,21 @@ msgid ""
 "[b]Note:[/b] [code]path[/code] should be a \"*.pub\" file if "
 "[code]public_only[/code] is [code]true[/code], a \"*.key\" file otherwise."
 msgstr ""
+"Enregistre une clé au chemin [code]path[/code] spécifié. Si "
+"[code]public_only[/code] est [code]true[/code], seule la clé publique sera "
+"enregistrée.\n"
+"[b]Note :[/b] [code]path[/code] doit être un fichier avec l'extension \"."
+"pub\" si [code]public_only[/code] est [code]true[/code], et avec l'extension "
+"\".key\" sinon."
 
 #: doc/classes/CryptoKey.xml
 msgid ""
 "Returns a string containing the key in PEM format. If [code]public_only[/"
 "code] is [code]true[/code], only the public key will be included."
 msgstr ""
+"Retourne une chaîne de caractères contenant la clé en format PEM. Si "
+"[code]public_only[/code] est [code]true[/code], seule la clé publique sera "
+"incluse."
 
 #: modules/csg/doc_classes/CSGBox.xml
 msgid "A CSG Box shape."
@@ -24002,7 +24551,7 @@ msgstr ""
 
 #: modules/csg/doc_classes/CSGPolygon.xml
 msgid "The [member polygon] shape is extruded along the negative Z axis."
-msgstr ""
+msgstr "La forme [member polygone] est extrudée le long de l'axe Z négatif."
 
 #: modules/csg/doc_classes/CSGPolygon.xml
 msgid ""
@@ -24016,6 +24565,8 @@ msgid ""
 "The [member polygon] shape is extruded along the [Path] specified in [member "
 "path_node]."
 msgstr ""
+"La forme [member polygone] est extrudée le long du [Path] spécifié par "
+"[member path_node]."
 
 #: modules/csg/doc_classes/CSGPolygon.xml
 msgid ""
@@ -24110,6 +24661,9 @@ msgid ""
 "node and the second is the root [Mesh] of this node. Only works when this "
 "node is the root shape."
 msgstr ""
+"Retourne un [Array] avec deux éléments, le premier est la [Transform] de ce "
+"nœud et le second est le [Mesh] racine de ce nœud. Ne fonctionne que lorsque "
+"ce nœud est la forme racine."
 
 #: modules/csg/doc_classes/CSGShape.xml
 msgid ""
@@ -24180,6 +24734,9 @@ msgid ""
 "CSG child node as the operation is between this node and the previous child "
 "of this nodes parent."
 msgstr ""
+"L'opération effectuée sur cette forme. Ceci est ignoré pour le premier nœud "
+"enfant CSG puisque l'opération est entre ce nœud et l'enfant précédent de ce "
+"nœud parent."
 
 #: modules/csg/doc_classes/CSGShape.xml
 msgid ""
@@ -24194,6 +24751,9 @@ msgid ""
 "always act like a static body. Note that the collision shape is still active "
 "even if the CSG shape itself is hidden."
 msgstr ""
+"Ajoute une forme de collision au moteur de physique pour cette forme CSG. "
+"Cela agira toujours comme un corps statique. Notez que la forme de collision "
+"est toujours active même si cette forme CSG est cachée."
 
 #: modules/csg/doc_classes/CSGShape.xml
 msgid ""
@@ -24291,6 +24851,9 @@ msgid ""
 "effect making the torus seem rounded. If [code]false[/code] the torus will "
 "have a flat shaded look."
 msgstr ""
+"Si [code]true[/code] les normales du tore sont définies pour donner un effet "
+"lisse donnant l'impression que le tore est arrondis. Si [code]false[/code] "
+"le tore aura un aspect de rendu plat."
 
 #: modules/mono/doc_classes/CSharpScript.xml
 #, fuzzy
@@ -24307,6 +24870,9 @@ msgid ""
 "class and is only available in Mono-enabled Godot builds.\n"
 "See also [GodotSharp]."
 msgstr ""
+"Cette classe représente un script C#. C'est l'équivalent C# de la classe "
+"[GDScript] et n'est disponible que dans les versions de Godot avec Mono.\n"
+"Voir aussi [GodotSharp]."
 
 #: modules/mono/doc_classes/CSharpScript.xml
 #: modules/gdnative/doc_classes/PluginScript.xml
@@ -24785,12 +25351,24 @@ msgid ""
 "get_point_count][/code]), the point will be appended at the end of the point "
 "list."
 msgstr ""
+"Ajoute un point à une courbe à la [code]position[/code] par rapport à la "
+"position de la [Curve2D], avec des points de contrôle d'entrée [code]in[/"
+"code] et de sortie [code]out[/code].\n"
+"Si [code]at_position[/code] est spécifié, le point est inséré juste avant ce "
+"numéro de point [code]at_position[/code], en déplaçant ce point (et tous les "
+"autres points qui suivent) après le point inséré. Si [code]at_position[/"
+"code] n'est pas donné, ou est une valeur invalide ([code]at_position < 0[/"
+"code] ou [code]at_position >= [method get_point_count][/code,) le point sera "
+"ajouté en dernier."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
 "Returns the total length of the curve, based on the cached points. Given "
 "enough density (see [member bake_interval]), it should be approximate enough."
 msgstr ""
+"Retourne la longueur totale de la courbe, à partir de la distance entre les "
+"points mis en cache. Si la densité est suffisante (voir [member "
+"bake_interval]), cette longeur devrait être une approximation suffisante."
 
 #: doc/classes/Curve2D.xml
 msgid "Returns the cache of points as a [PoolVector2Array]."
@@ -24802,6 +25380,9 @@ msgid ""
 "be used in [method interpolate_baked].\n"
 "[code]to_point[/code] must be in this curve's local space."
 msgstr ""
+"Retourne le décalage le plus proche de [code]to_point[/code]. Ce décalage "
+"est destiné à être utilisé dans [méthode interpolate_baked].\n"
+"[code]to_point[/code] doit être dans l'espace local de la courbe."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
@@ -24809,6 +25390,9 @@ msgid ""
 "code].\n"
 "[code]to_point[/code] must be in this curve's local space."
 msgstr ""
+"Retourne le point en cache le plus proche (dans l'espace local de la courbe) "
+"de [code]to_point[/code].\n"
+"[code]to_point[/code] doit être dans l'espace local de la courbe."
 
 #: doc/classes/Curve2D.xml
 msgid ""
@@ -24817,6 +25401,10 @@ msgid ""
 "the index is out of bounds, the function sends an error to the console, and "
 "returns [code](0, 0)[/code]."
 msgstr ""
+"Retourne la position du point de contrôle menant vers le sommet [code]idx[/"
+"code]. La position retournée est relative au sommet [code]idx[/code]. Si "
+"l'index est hors limites, la fonction affiche une erreur, et retourne [code]"
+"(0, 0)[/code]."
 
 #: doc/classes/Curve2D.xml
 msgid ""
@@ -24825,6 +25413,10 @@ msgid ""
 "code]. If the index is out of bounds, the function sends an error to the "
 "console, and returns [code](0, 0)[/code]."
 msgstr ""
+"Retourne la position du point de contrôle en partant du sommet [code]idx[/"
+"code]. La position retournée est relative au sommet [code]idx[/code]. Si "
+"l'index est hors limites, la fonction affiche une erreur, et retourne [code]"
+"(0, 0)[/code]."
 
 #: doc/classes/Curve2D.xml
 msgid ""
@@ -24832,6 +25424,8 @@ msgid ""
 "bounds, the function sends an error to the console, and returns [code](0, 0)"
 "[/code]."
 msgstr ""
+"Retourne la position du sommet [code]idx[/code]. Si l'index est hors "
+"limites, la fonction affiche une erreur, et retourne [code](0, 0)[/code]."
 
 #: doc/classes/Curve2D.xml
 msgid ""
@@ -24844,6 +25438,14 @@ msgid ""
 "vertex, and [code]t[/code] is ignored. If the curve has no points, the "
 "function sends an error to the console, and returns [code](0, 0)[/code]."
 msgstr ""
+"Retourne la position entre le sommet [code]idx[/code] et le sommet [code]idx "
+"+ 1[/code], où [code]t[/code] contrôle si le point est le premier sommet "
+"([code]t = 0,0[/code]), le dernier sommet ([code]t = 1.0[/code]), ou entre "
+"les deux. Les valeurs de [code]t[/code] en dehors de l'intervalle ([code]0.0 "
+">= t <=1[/code]) donnent des résultats inattendus, mais prévisibles.\n"
+"Si [code]idx[/code] est hors limites il est tronqué au premier ou au dernier "
+"sommet, et [code]t[/code] est ignoré. Si la courbe n'a pas de points, la "
+"fonction affiche une erreur, et retourne [code](0, 0)[/code]."
 
 #: doc/classes/Curve2D.xml
 msgid ""
@@ -24856,6 +25458,14 @@ msgid ""
 "Cubic interpolation tends to follow the curves better, but linear is faster "
 "(and often, precise enough)."
 msgstr ""
+"Retourne un point dans la courbe à la position [code]offset[/code], où "
+"[code]offset[/code] est mesuré en pixels le long de la courbe.\n"
+"Pour cela, il trouve les deux points dans le cache où le [code]offset[/code] "
+"se situe entre, puis interpole les valeurs. Cette interpolation est cubique "
+"si [code]cubic[/code] est [code]true[/code], ou linéaire si est [code]false[/"
+"code].\n"
+"L'interpolation cubique tend à mieux suivre les courbes, mais "
+"l'interpolation linéaire est plus rapide (et souvent bien assez précise)."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
@@ -24863,12 +25473,17 @@ msgid ""
 "interpolate] using the integer part of [code]fofs[/code] as [code]idx[/"
 "code], and its fractional part as [code]t[/code]."
 msgstr ""
+"Retourne la position au sommet [code]fofs[/code]. Ça appelle [method "
+"interpolate] en utilisant la partie entière de [code]fofs[/code] pour "
+"[code]idx[/code], et sa partie décimale pour [code]t[/code]."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
 "Deletes the point [code]idx[/code] from the curve. Sends an error to the "
 "console if [code]idx[/code] is out of bounds."
 msgstr ""
+"Supprime le point [code]idx[/code] de la courbe. Affiche une erreur si "
+"[code]idx[/code] est hors limites."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
@@ -24876,6 +25491,9 @@ msgid ""
 "code]. If the index is out of bounds, the function sends an error to the "
 "console. The position is relative to the vertex."
 msgstr ""
+"Régle la position du point de contrôle menant au sommet [code]idx[/code]. Si "
+"l'index est hors limites, la fonction affiche une erreur. La position est "
+"relative au sommet."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
@@ -24883,12 +25501,17 @@ msgid ""
 "code]. If the index is out of bounds, the function sends an error to the "
 "console. The position is relative to the vertex."
 msgstr ""
+"Régle la position du point de contrôle partant du sommet [code]idx[/code]. "
+"Si l'index est hors limites, la fonction affiche une erreur. La position est "
+"relative au sommet."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
 "Sets the position for the vertex [code]idx[/code]. If the index is out of "
 "bounds, the function sends an error to the console."
 msgstr ""
+"Définit la position pour le vertex [code]idx[/code]. Si l'index est hors "
+"limites, la fonction affiche une erreur."
 
 #: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid ""
@@ -24944,6 +25567,11 @@ msgid ""
 "It keeps a cache of precalculated points along the curve, to speed up "
 "further calculations."
 msgstr ""
+"Cette classe décrit une courbe de Bézier dans l'espace 3D. Elle est "
+"principalement utilisée pour donner une forme à un [Path], mais peut être "
+"échantillonné manuellement à d'autres fins.\n"
+"Elle conserve un cache de points précalculés le long de la courbe, pour "
+"accélérer de nouveaux calculs."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -24956,6 +25584,15 @@ msgid ""
 "get_point_count][/code]), the point will be appended at the end of the point "
 "list."
 msgstr ""
+"Ajoute un point à la courbe à [code]position[/code] par rapport à la "
+"position [Curve3D], avec des points de contrôle [code]in[/code] et "
+"[code]out[/code].\n"
+"Si [code]at_position[/code] est spécifiée, le point est inséré avant le "
+"numéro de point [code]at_position[/code], deplaçant ce point (et tous les "
+"suivants) après le point inséré. Si [code]at_position[/code] n'est pas "
+"spécifiée, ou est une valeur invalide ([code]at_position <0[/code] ou "
+"[code]at_position >= [method get_point_count][/code]), le point sera ajouté "
+"à la fin de la liste des points."
 
 #: doc/classes/Curve3D.xml
 msgid "Returns the cache of points as a [PoolVector3Array]."
@@ -24970,6 +25607,8 @@ msgid ""
 "Returns the cache of up vectors as a [PoolVector3Array].\n"
 "If [member up_vector_enabled] is [code]false[/code], the cache will be empty."
 msgstr ""
+"Retourne le cache des vecteurs du haut dans un [PoolVector3Array].\n"
+"Si [member up_vector_enabled] est [code]false[/code], le cache sera vide."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -24978,6 +25617,10 @@ msgid ""
 "interpolate_baked_up_vector].\n"
 "[code]to_point[/code] must be in this curve's local space."
 msgstr ""
+"Retourne le décalage le plus proche de [code]to_point[/code]. Ce décalage "
+"est destiné à être utilisé dans [method interpolate_baked] ou [method "
+"interpolate_baked_up_vector].\n"
+"[code]to_point[/code] doit être dans l'espace local de cette courbe."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -24986,6 +25629,10 @@ msgid ""
 "the index is out of bounds, the function sends an error to the console, and "
 "returns [code](0, 0, 0)[/code]."
 msgstr ""
+"Retourne la position du point de contrôle menant au sommet [code]idx[/code]. "
+"La position retournée est relative au sommet [code]idx[/code]. Si l'index "
+"est hors limites, la fonction affiche une erreur, et retourne [code](0, 0, 0)"
+"[/code]."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -24994,6 +25641,10 @@ msgid ""
 "code]. If the index is out of bounds, the function sends an error to the "
 "console, and returns [code](0, 0, 0)[/code]."
 msgstr ""
+"Retourne la position du point de contrôle partant du sommet [code]idx[/"
+"code]. La position retournée est relative au sommet [code]idx[/code]. Si "
+"l'index est hors limites, la fonction affiche une erreur, et retourne [code]"
+"(0, 0, 0)[/code]."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -25001,6 +25652,8 @@ msgid ""
 "bounds, the function sends an error to the console, and returns [code](0, 0, "
 "0)[/code]."
 msgstr ""
+"Retourne la position du sommet [code]idx[/code]. Si l'index est hors "
+"limites, la fonction affiche une erreur, et retourne [code](0, 0, 0)[/code]."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -25023,6 +25676,15 @@ msgid ""
 "vertex, and [code]t[/code] is ignored. If the curve has no points, the "
 "function sends an error to the console, and returns [code](0, 0, 0)[/code]."
 msgstr ""
+"Retourne la position entre le sommet [code]idx[/code] et le sommet [code]idx "
+"+ 1[/code], où [code]t[/code] contrôle si le point est le premier sommet "
+"([code]t = 0,0[/code]), le dernier sommet ([code]t = 1.0[/code]), ou entre "
+"ces deux valeurs. Les valeurs de [code]t[/code] en dehors de l'intervalle "
+"([code]0.0 >= t <=1[/code]) donnent des résultats inattendus, mais "
+"prévisibles.\n"
+"Si [code]idx[/code] est hors limites il est tronqué au premier ou au dernier "
+"sommet, et [code]t[/code] est ignoré. Si la courbe n'a pas de points, la "
+"fonction affiche une erreur, et retourne [code](0, 0, 0)[/code]."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -25035,6 +25697,14 @@ msgid ""
 "Cubic interpolation tends to follow the curves better, but linear is faster "
 "(and often, precise enough)."
 msgstr ""
+"Retourne un point dans la courbe à la position [code]offset[/code], où "
+"[code]offset[/code] est mesuré en unités 3D le long de la courbe.\n"
+"Pour cela, il trouve les deux points dans le cache où le [code]offset[/code] "
+"se situe entre, puis interpole les valeurs. Cette interpolation est cubique "
+"si [code]cubic[/code] est [code]true[/code], ou linéaire si est [code]false[/"
+"code].\n"
+"L'interpolation cubique tend à mieux suivre les courbes, mais "
+"l'interpolation linéaire est plus rapide (et souvent bien assez précise)."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -25047,6 +25717,14 @@ msgid ""
 "If the curve has no up vectors, the function sends an error to the console, "
 "and returns [code](0, 1, 0)[/code]."
 msgstr ""
+"Retourne un vecteur haut dans la courbe à la position [code]offset[/code], "
+"où [code]offset[/code] est mesuré en unités 3D le long de la courbe.\n"
+"Pour cela, il trouve les deux vecteurs dans le cache où le [code]offset[/"
+"code] se situe entre, puis interpole les valeurs. Si [code]apply_tilt[/code] "
+"est [code]true[/code], une inclinaison interpolée est aussi appliquée au "
+"vecteur interpolé.\n"
+"Si la courbe n'a pas de vecteurs, la fonction affiche une erreur, et "
+"retourne [code](0, 1, 0)[/code]."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -25056,6 +25734,11 @@ msgid ""
 "the path would have. In the case of a curve controlling a [PathFollow], this "
 "tilt is an offset over the natural tilt the [PathFollow] calculates."
 msgstr ""
+"Définit l'angle d'inclinaison en radians pour le point [code]idx[/code]. Si "
+"l'index est hors limites, la fonction affiche une erreur.\n"
+"L'inclinaison contrôle la rotation qu'un objet parcourant la courbe aurait. "
+"Dans le cas d'une courbe contrôlant un [PathFollow], cette inclinaison est "
+"un décalage sur l'inclinaison naturelle que calcule le [PathFollow]."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -25065,6 +25748,11 @@ msgid ""
 "smaller the distance, the more points in the cache and the more memory it "
 "will consume, so use with care."
 msgstr ""
+"La distance en unités entre deux points de cache adjacents. Le changement "
+"force le cache à être recalculé la prochaine fois que la fonction [method "
+"get_baked_points] ou [method get_baked_length] sera appelée. Plus la "
+"distance est petite, plus il y aura de points dans le cache, et plus ça "
+"utilisera de mémoire, à utiliser donc avec soin."
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -25072,6 +25760,10 @@ msgid ""
 "This is used when [member PathFollow.rotation_mode] is set to [constant "
 "PathFollow.ROTATION_ORIENTED]. Changing it forces the cache to be recomputed."
 msgstr ""
+"Si [code]true[/code], la courbe pré-calcule des vecteurs utilisés pour "
+"l'orientation. Ceci est utilisé lorsque [member PathFollow.rotation_mode] "
+"est défini à [constant PathFollow.ROTATION_ORIENTED]. Le changer force le "
+"cache à être recalculé."
 
 #: doc/classes/CurveTexture.xml
 msgid "A texture that shows a curve."
@@ -25082,6 +25774,8 @@ msgid ""
 "Renders a given [Curve] provided to it. Simplifies the task of drawing "
 "curves and/or saving them as image files."
 msgstr ""
+"Fait le rendu d'une [Curve] donnée. Simplifie la tâche de dessiner les "
+"courbes et/ou de les enregistrer dans des fichiers d'image."
 
 #: doc/classes/CurveTexture.xml
 #, fuzzy
@@ -25094,6 +25788,10 @@ msgid ""
 "represent high-frequency data better (such as sudden direction changes), at "
 "the cost of increased generation time and memory usage."
 msgstr ""
+"La largeur de la texture (en pixels). Des valeurs plus élevées permettent de "
+"mieux représenter les données à haute fréquence (comme les changements "
+"soudains de direction) au coût de l'utilisation accrue du temps de "
+"génération et de la mémoire."
 
 #: doc/classes/CylinderMesh.xml
 msgid "Class representing a cylindrical [PrimitiveMesh]."
@@ -25105,12 +25803,17 @@ msgid ""
 "create cones by setting either the [member top_radius] or [member "
 "bottom_radius] properties to [code]0.0[/code]."
 msgstr ""
+"La classe représentant un [PrimitiveMesh] cylindrique. Cette classe peut "
+"être utilisée pour créer des cônes en définissant la propriété [member "
+"top_radius] ou [member bottom_radius] à [code]0.0[/code]."
 
 #: doc/classes/CylinderMesh.xml
 msgid ""
 "Bottom radius of the cylinder. If set to [code]0.0[/code], the bottom faces "
 "will not be generated, resulting in a conic shape."
 msgstr ""
+"Le rayon inférieur du cylindre. Si [code]0.0[/code], les faces inférieures "
+"ne seront pas générées, ce qui donne une forme conique."
 
 #: doc/classes/CylinderMesh.xml
 msgid "Full height of the cylinder."
@@ -25121,6 +25824,9 @@ msgid ""
 "Number of radial segments on the cylinder. Higher values result in a more "
 "detailed cylinder/cone at the cost of performance."
 msgstr ""
+"Le nombre de segments radiaux sur le cylindre. Des valeurs plus élevées "
+"génèrent des cylindres/cônes plus détaillés mais peuvent réduire les "
+"performances."
 
 #: doc/classes/CylinderMesh.xml
 msgid ""
@@ -25138,6 +25844,8 @@ msgid ""
 "Top radius of the cylinder. If set to [code]0.0[/code], the top faces will "
 "not be generated, resulting in a conic shape."
 msgstr ""
+"Le rayon supérieur du cylindre. Si [code]0.0[/code], les faces supérieures "
+"ne seront pas générées, ce qui donne une forme conique."
 
 #: doc/classes/CylinderShape.xml
 msgid "Cylinder shape for collisions."
@@ -25438,6 +26146,12 @@ msgid ""
 "[b]Note:[/b] Don't erase elements while iterating over the dictionary. You "
 "can iterate over the [method keys] array instead."
 msgstr ""
+"Efface une paire de clé/valeur du dictionnaire spécifiée par sa clé. "
+"Retourne [code]true[/code] si la clé donnée était présente dans le "
+"dictionnaire, [code]false[/code] sinon.\n"
+"[b]Note :[/b] Ne supprimez pas les éléments pendant l'énumération du "
+"dictionnaire. Vous pouvez à la place énumérer le dictionnaire avec [method "
+"keys] qui retourne un tableau immuable."
 
 #: doc/classes/Dictionary.xml
 msgid ""
@@ -25445,6 +26159,9 @@ msgid ""
 "key does not exist, the method returns the value of the optional default "
 "argument, or [code]null[/code] if it is omitted."
 msgstr ""
+"Retourne la valeur actuelle de la clé spécifiée dans le [Dictionnaire]. Si "
+"la clé n'existe pas, la méthode retourne la valeur de l'argument optionnel "
+"\"default\", ou [code]null[/code] si elle n'est pas spécifiée."
 
 #: doc/classes/Dictionary.xml
 msgid ""
@@ -25525,6 +26242,9 @@ msgid ""
 "duplicate keys will not be copied over, unless [code]overwrite[/code] is "
 "[code]true[/code]."
 msgstr ""
+"Ajoute tous les éléments de [code]dictionary[/code] à ce [Dictionnaire]. Par "
+"défaut, les clés en double ne seront pas remplaçées, sauf si "
+"[code]overwrite[/code] est [code]true[/code]."
 
 #: doc/classes/Dictionary.xml
 msgid "Returns the number of keys in the dictionary."
@@ -25547,6 +26267,12 @@ msgid ""
 "or moonlight. The worldspace location of the DirectionalLight transform "
 "(origin) is ignored. Only the basis is used to determine light direction."
 msgstr ""
+"Une lumière directionnelle est un type de nœud [Light] qui fait un rendu "
+"d'un nombre infini de rayons parallèles couvrant toute la scène. Il est "
+"utilisé pour les lumières à forte intensité qui sont situées loin de la "
+"scène pour modéliser la lumière du soleil ou du clair de lune. L'emplacement "
+"global de la DirectionalLight (son origine) est ignoré. Seule sa rotation "
+"est utilisée pour déterminer la direction de la lumière."
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -25563,6 +26289,10 @@ msgid ""
 "moderate performance cost. This is ignored when [member "
 "directional_shadow_mode] is [constant SHADOW_ORTHOGONAL]."
 msgstr ""
+"Si [code]true[/code], le détail des ombres est sacrifié pour obtenir des "
+"transitions plus lisses entre les fractions. Activer cette option a "
+"également un coût modéré sur les performances. Ceci est ignoré lorsque "
+"[member directional_shadow_mode] est [constant SHADOW_ORTHOGONAL]."
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -25579,6 +26309,10 @@ msgid ""
 "shadow detail and performance (since more objects need to be included in the "
 "directional shadow rendering)."
 msgstr ""
+"La distance maximale pour les fractions des ombres. Augmenter cette valeur "
+"rendra visibles les ombres directionnelles de plus loin, mais affichera "
+"moins de détails des ombres et de moins bonnes performances (puisque plus "
+"d'objets doivent être inclus dans le rendu d'ombre directionnel)."
 
 #: doc/classes/DirectionalLight.xml
 msgid "The light's shadow rendering algorithm. See [enum ShadowMode]."
@@ -25590,6 +26324,8 @@ msgid ""
 "Can be used to fix special cases of self shadowing when objects are "
 "perpendicular to the light."
 msgstr ""
+"Peut être utilisé pour corriger des cas spéciaux pour les ombres des objets "
+"qui sont perpendiculaires à la source de lumière."
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -25598,6 +26334,10 @@ msgid ""
 "directional_shadow_mode] is [constant SHADOW_PARALLEL_2_SPLITS] or [constant "
 "SHADOW_PARALLEL_4_SPLITS]."
 msgstr ""
+"La distance de la caméra à la division 1 de l'ombre. Relative à [member "
+"directional_shadow_max_distance]. Seulement utilisé lorsque [member "
+"directional_shadow_mode] est [constant SHADOW_PARALLEL_2_SPLITS] ou "
+"[constant SHADOW_PARALLEL_4_SPLITS]."
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -25606,6 +26346,10 @@ msgid ""
 "directional_shadow_mode] is [constant SHADOW_PARALLEL_2_SPLITS] or [constant "
 "SHADOW_PARALLEL_4_SPLITS]."
 msgstr ""
+"La distance de la division 1 à la divion 2 de l'ombre. Relative à [member "
+"directional_shadow_max_distance]. Seulement utilisé lorsque [member "
+"directional_shadow_mode] est [constant SHADOW_PARALLEL_2_SPLITS] ou "
+"[constant SHADOW_PARALLEL_4_SPLITS]."
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -25613,6 +26357,9 @@ msgid ""
 "directional_shadow_max_distance]. Only used when [member "
 "directional_shadow_mode] is [constant SHADOW_PARALLEL_4_SPLITS]."
 msgstr ""
+"La distance de la division 2 à la divion 3 de l'ombre. Relative à [member "
+"directional_shadow_max_distance]. Seulement utilisé lorsque [member "
+"directional_shadow_mode] est [constant SHADOW_PARALLEL_4_SPLITS]."
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -25642,6 +26389,8 @@ msgid ""
 "Keeps the shadow stable when the camera moves, at the cost of lower "
 "effective shadow resolution."
 msgstr ""
+"Garde l'ombre stable lorsque la caméra se déplace, mais la résolution de "
+"l'ombre se trouve réduite."
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -25649,6 +26398,10 @@ msgid ""
 "shadow edges. This mode typically works best in games where the camera will "
 "often move at high speeds, such as most racing games."
 msgstr ""
+"Essaye d'atteindre une résolution maximale pour l'ombre. Peut faire "
+"apparaitre un effet de scie sur les bords de l'ombre. Ce mode fonctionne "
+"généralement mieux dans les jeux où la caméra se déplace souvent à des "
+"vitesses élevées, comme la plupart des jeux de course."
 
 #: doc/classes/Directory.xml
 msgid "Type used to handle the filesystem."
@@ -26177,6 +26930,10 @@ msgid ""
 "If a given character is included in more than one font, it appears only once "
 "in the returned string."
 msgstr ""
+"Retourne une chaîne contenant tous les caractères disponibles dans la police "
+"principale et celles de repli.\n"
+"Si un caractère donné est inclus dans plus d'une police, il apparaît "
+"seulement une fois dans la chaîne retournée."
 
 #: doc/classes/DynamicFont.xml
 msgid "Returns the fallback font at index [code]idx[/code]."
@@ -26206,6 +26963,8 @@ msgid ""
 "Sets the spacing for [code]type[/code] (see [enum SpacingType]) to "
 "[code]value[/code] in pixels (not relative to the font size)."
 msgstr ""
+"Définit l'espacement pour [code]type[/code] (voir [enum SpacingType]) à "
+"[code]value[/code] en pixels (et en fonction de la taille de la police)."
 
 #: doc/classes/DynamicFont.xml
 msgid "Extra spacing at the bottom in pixels."
@@ -26217,6 +26976,8 @@ msgid ""
 "This can be a negative number to make the distance between characters "
 "smaller."
 msgstr ""
+"L'espacement additionnel entre chaque caratère, en pixels.\n"
+"Ceci peut être un nombre négatif pour rapprocher les caractères."
 
 #: doc/classes/DynamicFont.xml
 msgid ""
@@ -26224,6 +26985,9 @@ msgid ""
 "extra_spacing_char]) in pixels.\n"
 "This can be a negative number to make the distance between words smaller."
 msgstr ""
+"L'espacement additionnel entre les caractères d'espace (en plus de [member "
+"extra_spacing_char]), en pixels.\n"
+"Cela peut être un nombre négatif pour rapprocher les mots."
 
 #: doc/classes/DynamicFont.xml
 msgid "Extra spacing at the top in pixels."
@@ -26241,10 +27005,17 @@ msgid ""
 "black here, it won't be possible to change its color using a Label's font "
 "outline modulate theme item."
 msgstr ""
+"La couleur du contour de la police.\n"
+"[b]Note :[/b] Il est recommandé de laisser ceci à la valeur par défaut afin "
+"que vous puissiez l'ajuster dans les contrôles individuels. Par exemple, si "
+"le contour est déclaré ici en noir, il ne sera pas possible de modifier sa "
+"couleur même en utilisant un thème pour le Label."
 
 #: doc/classes/DynamicFont.xml
 msgid "The font outline's thickness in pixels (not relative to the font size)."
 msgstr ""
+"L'épaisseur du contour de la police, en pixels (et non en fonction à la "
+"taille de la police)."
 
 #: doc/classes/DynamicFont.xml
 msgid "The font size in pixels."
@@ -26265,6 +27036,9 @@ msgid ""
 "appearance when downscaling it if font oversampling is disabled or "
 "ineffective."
 msgstr ""
+"Si [code]true[/code], les mipmaps sont utilisées. Cela améliore l'apparence "
+"de la police lorsqu'elle est désactivée si le sur-échantillonnage de la "
+"police est désactivé ou non utilisé."
 
 #: doc/classes/DynamicFont.xml
 msgid "Spacing at the top."
@@ -26292,6 +27066,8 @@ msgid ""
 "Used with [DynamicFont] to describe the location of a vector font file for "
 "dynamic rendering at runtime."
 msgstr ""
+"Utilisé avec [DynamicFont] pour décrire l'emplacement d'un fichier de police "
+"vectoriel pour un rendu dynamique au lancement du projet."
 
 #: doc/classes/DynamicFontData.xml
 msgid ""
@@ -26433,6 +27209,12 @@ msgid ""
 "This method should not be used for System libraries as they are already "
 "present on the device."
 msgstr ""
+"Ajoute une bibliothèque dynamique (*.dylib, *.framework) au \"Linking "
+"Phase\" dans le projet Xcode d'iOS et l'intègre en binaire final.\n"
+"[b]Note :[/b] Pour les bibliothèques statiques (*.a), ça fonctionne de la "
+"même manière que [méthode add_ios_framework].\n"
+"Cette méthode ne devrait pas être utilisée pour les bibliothèques système "
+"car elles sont déjà présentes sur l'appareil."
 
 #: doc/classes/EditorExportPlugin.xml
 msgid ""
@@ -26451,6 +27233,8 @@ msgstr ""
 #: doc/classes/EditorExportPlugin.xml
 msgid "Adds a static lib from the given [code]path[/code] to the iOS project."
 msgstr ""
+"Ajoute la bibliothèque statique à l'emplacement [code]path[/code] spécifié "
+"au projet iOS."
 
 #: doc/classes/EditorExportPlugin.xml
 msgid ""
@@ -26458,6 +27242,9 @@ msgid ""
 "directory of macOS app bundle.\n"
 "[b]Note:[/b] This is useful only for macOS exports."
 msgstr ""
+"Ajoute le fichier ou le dossier correspondant à l'emplacement [code]path[/"
+"code] au dossier [code]PlugIns[/code] de l'applications macOS.\n"
+"[b]Note :[/b] Cela n'est utile que pour les exports pour macOS."
 
 #: doc/classes/EditorExportPlugin.xml
 msgid ""
@@ -26613,6 +27400,11 @@ msgid ""
 "When a property is disabled, it won't appear in the inspector when selecting "
 "a node that extends the class specified by [code]class_name[/code]."
 msgstr ""
+"Si [code]disable[/code] est [code]true[/code], désactive l'édition de la "
+"[code]property[/code] dans la classe nommée [code]class_name[/code]. "
+"Lorsqu'une propriété est désactivée, elle n'apparaît plus dans l'inspecteur "
+"lors du choix d'un nœud qui étend la classe spécifiée par [code]class_name[/"
+"code]."
 
 #: doc/classes/EditorFeatureProfile.xml
 msgid ""
@@ -26726,12 +27518,17 @@ msgid ""
 "Notify the [EditorFileDialog] that its view of the data is no longer "
 "accurate. Updates the view contents on next view update."
 msgstr ""
+"Notifie le [EditorFileDialog] que sa vue que son contenu n'est plus à jour. "
+"Mettre à jour le contenu de la vue sur la prochaine mise à jour de la vue."
 
 #: doc/classes/EditorFileDialog.xml
 msgid ""
 "The location from which the user may select a file, including [code]res://[/"
 "code], [code]user://[/code], and the local file system."
 msgstr ""
+"L'emplacement à partir duquel l'utilisateur peut sélectionner un fichier, y "
+"compris [code]res://[/code], [code]user://[code], et le système de fichiers "
+"local."
 
 #: doc/classes/EditorFileDialog.xml
 msgid "The currently occupied directory."
@@ -26758,11 +27555,13 @@ msgid ""
 "The view format in which the [EditorFileDialog] displays resources to the "
 "user."
 msgstr ""
+"Le format de vue dans lequel le [EditorFileDialog] affiche les ressources à "
+"l'utilisateur."
 
 #: doc/classes/EditorFileDialog.xml
 msgid ""
 "The purpose of the [EditorFileDialog], which defines the allowed behaviors."
-msgstr ""
+msgstr "Le but du [EditorFileDialog], qui définit les comportements autorisés."
 
 #: doc/classes/EditorFileDialog.xml
 msgid ""
@@ -26789,6 +27588,8 @@ msgid ""
 "The [EditorFileDialog] can select only one file. Accepting the window will "
 "open the file."
 msgstr ""
+"Le [EditorFileDialog] ne peut sélectionner qu'un seul fichier. Accepter "
+"cette fenêtre ouvrira le fichier sélectionné."
 
 #: doc/classes/EditorFileDialog.xml
 msgid ""
@@ -26803,6 +27604,8 @@ msgid ""
 "The [EditorFileDialog] can select only one directory. Accepting the window "
 "will open the directory."
 msgstr ""
+"Le [EditorFileDialog] ne peut sélectionner qu'un seul dossier. Accepter la "
+"fenêtre ouvrira le dossier sélectionné."
 
 #: doc/classes/EditorFileDialog.xml
 msgid ""
@@ -26860,6 +27663,11 @@ msgid ""
 "[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
 "the singleton using [method EditorInterface.get_resource_filesystem]."
 msgstr ""
+"Cet objet contient des informations sur toutes les ressources du système de "
+"fichiers, leurs types, etc.\n"
+"[b]Note :[/b] Cette classe ne devrait pas être instanciée directement. "
+"Accédez plutôt à l'instance unique avec [method EditorInterface."
+"get_resource_filesystem]"
 
 #: doc/classes/EditorFileSystem.xml
 msgid ""
@@ -26867,6 +27675,10 @@ msgid ""
 "string such as [code]\"Resource\"[/code] or [code]\"GDScript\"[/code], "
 "[i]not[/i] a file extension such as [code]\".gd\"[/code]."
 msgstr ""
+"Retourne le type de ressource du fichier, spécifié par le chemin complet. "
+"Ceci retourne une chaîne comme [code]\"Resource\"[/code] or "
+"[code]\"GDScript\"[/code], mais [i]pas[/i] l'extension du fichier comme "
+"[code]\".gd\"[/code]."
 
 #: doc/classes/EditorFileSystem.xml
 msgid "Gets the root directory object."
@@ -26881,6 +27693,8 @@ msgstr ""
 #: doc/classes/EditorFileSystem.xml
 msgid "Returns the scan progress for 0 to 1 if the FS is being scanned."
 msgstr ""
+"Retourne la progression de l'analyse de 0 à 1 si le système de fichiers est "
+"en train d'être scanné."
 
 #: doc/classes/EditorFileSystem.xml
 #, fuzzy
@@ -26900,10 +27714,14 @@ msgid ""
 "Update a file information. Call this if an external program (not Godot) "
 "modified the file."
 msgstr ""
+"Met à jour les informations du fichier. Appelez cette méthode si un "
+"programme externe (hors Godot) a modifié le fichier."
 
 #: doc/classes/EditorFileSystem.xml
 msgid "Scans the script files and updates the list of custom class names."
 msgstr ""
+"Scanne les fichiers de script et met à jour la liste des noms de classe "
+"personnalisés."
 
 #: doc/classes/EditorFileSystem.xml
 msgid "Emitted if the filesystem changed."
@@ -26974,6 +27792,9 @@ msgid ""
 "[code]idx[/code]. If the file doesn't define a script class using the "
 "[code]class_name[/code] syntax, this will return an empty string."
 msgstr ""
+"Retourne la classe de base de la classe de script définie dans le fichier à "
+"index [code]idx[/code]. Si le fichier ne définit pas une classe de script en "
+"utilisant la syntaxe [code]class_name[/code], une chaîne vide est retournée."
 
 #: doc/classes/EditorFileSystemDirectory.xml
 msgid ""
@@ -26981,6 +27802,9 @@ msgid ""
 "code]. If the file doesn't define a script class using the [code]class_name[/"
 "code] syntax, this will return an empty string."
 msgstr ""
+"Retourne le nom de la classe script définie dans le fichier à index "
+"[code]idx[/code]. Si le fichier ne définit pas une classe de script en "
+"utilisant la syntaxe [code]class_name[/code], une chaîne vide est retournée."
 
 #: doc/classes/EditorFileSystemDirectory.xml
 msgid ""
@@ -26988,6 +27812,9 @@ msgid ""
 "returns a string such as [code]\"Resource\"[/code] or [code]\"GDScript\"[/"
 "code], [i]not[/i] a file extension such as [code]\".gd\"[/code]."
 msgstr ""
+"Retourne le type de ressource du fichier à l'index [code]idx[/code]. Ceci "
+"retourne une chaîne comme [code]\"Resource\"[/code] or [code]\"GDScript\"[/"
+"code], mais [i]pas[/i] l'extension du fichier comme [code]\".gd\"[/code]."
 
 #: doc/classes/EditorFileSystemDirectory.xml
 msgid "Returns the name of this directory."
@@ -27018,6 +27845,9 @@ msgid ""
 "Registers a custom resource importer in the editor. Use the class to parse "
 "any file and import it as a new resource type."
 msgstr ""
+"Enregistre un importateur de ressources personnalisée dans l'éditeur. "
+"Utilisez cette classe pour interpréter n'importe quel fichier pour "
+"l'importer comme nouveau type de ressource."
 
 #: doc/classes/EditorImportPlugin.xml
 msgid ""
@@ -27139,6 +27969,11 @@ msgid ""
 "[code]default_value[/code], [code]property_hint[/code] (optional), "
 "[code]hint_string[/code] (optional), [code]usage[/code] (optional)."
 msgstr ""
+"Retourne les options et les valeurs par défaut pour le préréglage à cet "
+"index. Retourne un Array de Dictionnary avec les clés suivantes : "
+"[code]name[/code], [code]default_value[/code], [code]property_hint[/code] "
+"(optionnel), [code]hint_string[/code] (optionnel) et [code]usage[/code] "
+"(optionnel)."
 
 #: doc/classes/EditorImportPlugin.xml
 msgid ""
@@ -27360,10 +28195,13 @@ msgid ""
 "by clicking the \"key\" icon next to a property when the Animation panel is "
 "toggled."
 msgstr ""
+"Émis lorsqu'une propriété est utilisée comme clé dans l'inspecteur. Les "
+"propriétés peuvent être utilisées comme clé en cliquant sur l'icône \"clé\" "
+"à côté d'une propriété lorsque le panneau \"Animation\" est ouvert."
 
 #: doc/classes/EditorInspector.xml
 msgid "Emitted when a property is selected in the inspector."
-msgstr ""
+msgstr "Émis lorsqu'une propriété est sélectionnée dans l'inspecteur."
 
 #: doc/classes/EditorInspector.xml
 msgid ""
@@ -27372,6 +28210,11 @@ msgid ""
 "code] property enabled. Since this property is always enabled in the editor "
 "inspector, this signal is never emitted by the editor itself."
 msgstr ""
+"Émis lorsqu'une propriété booléenne est basculée dans l'inspecteur.\n"
+"[b]Note :[/b] Ce signal n'est jamais émis si la propriété interne "
+"[code]autoclear[/code] est activée. Comme cette propriété est toujours "
+"activée dans l'inspecteur de l'éditeur, ce signal n'est jamais émis par "
+"l'éditeur lui-même."
 
 #: doc/classes/EditorInspector.xml
 msgid "Emitted when a resource is selected in the inspector."
@@ -27426,18 +28269,24 @@ msgstr "Les greffons de l'inspecteur"
 #: doc/classes/EditorInspectorPlugin.xml
 msgid "Adds a custom control, which is not necessarily a property editor."
 msgstr ""
+"Ajoute un contrôle personnalisé, qui n'est pas nécessairement un éditeur de "
+"propriété."
 
 #: doc/classes/EditorInspectorPlugin.xml
 msgid ""
 "Adds a property editor for an individual property. The [code]editor[/code] "
 "control must extend [EditorProperty]."
 msgstr ""
+"Ajoute un éditeur de propriétés pour une seule propriété. Le contrôle "
+"[code]editor[/code] doit être une sous-classe de [EditorProperty]."
 
 #: doc/classes/EditorInspectorPlugin.xml
 msgid ""
 "Adds an editor that allows modifying multiple properties. The [code]editor[/"
 "code] control must extend [EditorProperty]."
 msgstr ""
+"Ajoute un éditeur qui permet de modifier plusieurs propriétés. Le contrôle "
+"[code]editor[/code] doit être une sous-classe de [EditorProperty]."
 
 #: doc/classes/EditorInspectorPlugin.xml
 msgid "Returns [code]true[/code] if this object can be handled by this plugin."
@@ -27462,6 +28311,10 @@ msgid ""
 "built-in editor for this property, otherwise allows to insert a custom "
 "editor before the built-in one."
 msgstr ""
+"Appelé pour autoriser l'ajout d'éditeurs spécifiques à la propriété dans "
+"l'inspecteur. Habituellement, ils héritent de [EditorProperty]. Retourner "
+"[code]true[/code] supprimera l'éditeur intégré pour cette propriété, c'est-à-"
+"dire que ça permet d'insérer un éditeur personnalisé avant l'éditeur intégré."
 
 #: doc/classes/EditorInterface.xml
 msgid "Godot editor's interface."
@@ -27499,6 +28352,9 @@ msgid ""
 "Edits the given [Resource]. If the resource is a [Script] you can also edit "
 "it with [method edit_script] to specify the line and column position."
 msgstr ""
+"Modifie la [Resource] donnée. Si la ressource est un [Script], vous pouvez "
+"également la modifier avec [method edit_script] en spécifiant la position de "
+"la ligne et de la colonne."
 
 #: doc/classes/EditorInterface.xml
 msgid ""
@@ -27506,6 +28362,10 @@ msgid ""
 "can also be specified. The script will be open with the user-configured "
 "editor for the script's language which may be an external editor."
 msgstr ""
+"Modifie le [Script]. La ligne et la colonne à laquelle ce script s'ouvre "
+"peut également être spécifiées. Le script sera ouvert avec l'éditeur "
+"configuré par l'utilisateur pour ce type de langage, où un éditeur externe "
+"peut être spécifié."
 
 #: doc/classes/EditorInterface.xml
 msgid ""
@@ -27515,10 +28375,15 @@ msgid ""
 "[b]Warning:[/b] Removing and freeing this node will render the editor "
 "useless and may cause a crash."
 msgstr ""
+"Retourne le conteneur principal de la fenêtre de l'éditeur de Godot. Par "
+"exemple, vous pouvez l'utiliser pour récupérer la taille du conteneur et "
+"placer vos contrôles en conséquence.\n"
+"[b]Avertissement :[/b] Enlever et libérer ce nœud rend l'éditeur inutile et "
+"peut causer un plantage."
 
 #: doc/classes/EditorInterface.xml
 msgid "Returns the current path being viewed in the [FileSystemDock]."
-msgstr ""
+msgstr "Retourne l'actuel chemin en train d'être vu dans le [FileSystemDock]."
 
 #: doc/classes/EditorInterface.xml
 msgid "Returns the edited (current) scene's root [Node]."
@@ -27533,6 +28398,13 @@ msgid ""
 "code] and [code]interface/editor/custom_display_scale[/code] editor "
 "settings. Editor must be restarted for changes to be properly applied."
 msgstr ""
+"Retourne l'échelle actuelle de l'interface de l'éditeur ([code]1.0[/code] "
+"étant une échelle à 100%). Cela peut être utilisé pour régler la position et "
+"les dimensions des interfaces utilisateurs ajoutées par les greffons.\n"
+"[b]Note :[/b] Cette valeur est définie par [code]interface/editor/"
+"display_scale[/code] et [code]interface/editor/custom_display_scale[/code]. "
+"L'éditeur doit être redémarré pour que les changements soient complètement "
+"appliqués."
 
 #: doc/classes/EditorInterface.xml
 msgid "Returns the editor's [EditorSettings] instance."
@@ -27609,6 +28481,9 @@ msgid ""
 "[FileSystemDock]. If a file is selected, its base directory will be returned "
 "using [method String.get_base_dir] instead."
 msgstr ""
+"Retourne le chemin du dossier actuellement sélectionné dans le "
+"[FileSystemDock]. Si un fichier est sélectionné, son dossier de base sera "
+"retourné en utilisant [method String.get_base_dir]."
 
 #: doc/classes/EditorInterface.xml
 msgid "Returns the editor's [EditorSelection] instance."
@@ -27620,6 +28495,10 @@ msgid ""
 "Inspector dock. If [code]inspector_only[/code] is [code]true[/code], plugins "
 "will not attempt to edit [code]object[/code]."
 msgstr ""
+"Affiche la propriété donnée sur le [code]object[/code] donné dans la barre "
+"d'outils de l'inspecteur de l'éditeur. Si [code]inspector_only[/code] est "
+"[code]true[/code], les greffons ne tenteront pas de modifier cet "
+"[code]object[/code]."
 
 #: doc/classes/EditorInterface.xml
 #, fuzzy
@@ -27693,6 +28572,10 @@ msgid ""
 "([code]2D[/code], [code]3D[/code], [code]Script[/code], [code]AssetLib[/"
 "code])."
 msgstr ""
+"Spécifie l'écran principal courant de l'éditeur activé avec celui nommé "
+"[code]name[/code]. [code]name[/code] doit correspondre exactement au texte "
+"de l'onglet en question (soit [code]2D[/code], [code]3D[/code], "
+"[code]Script[/code], ou [code]AssetLib[/code])."
 
 #: doc/classes/EditorInterface.xml
 msgid ""
@@ -27711,6 +28594,8 @@ msgid ""
 "If [code]true[/code], enables distraction-free mode which hides side docks "
 "to increase the space available for the main view."
 msgstr ""
+"Si [code]true[/code], active le mode sans distraction qui cache les barres "
+"d'outils latérales pour augmenter l'espace disponible pour la vue principale."
 
 #: doc/classes/EditorPlugin.xml
 msgid "Used by the editor to extend its functionality."
@@ -27723,6 +28608,10 @@ msgid ""
 "plugins and export plugins. See also [EditorScript] to add functions to the "
 "editor."
 msgstr ""
+"Les greffons sont utilisés par l'éditeur pour étendre les fonctionnalités. "
+"Les types les plus courants de greffons sont ceux qui modifient un nœud "
+"donné ou un type de ressource, les greffons d'importation et d'exportation. "
+"Voir aussi [EditorScript] pour ajouter des fonctions à l'éditeur."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -27879,6 +28768,9 @@ msgid ""
 "Registers a new [EditorSceneImporter]. Scene importers are used to import "
 "custom 3D asset formats as scenes."
 msgstr ""
+"Enregistre un nouveau [EditorSceneImporter]. Les importateurs de scène sont "
+"utilisés pour importer des formats d'éléments 3D personnalisés comme des "
+"scènes."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -27886,6 +28778,11 @@ msgid ""
 "custom gizmos to the 3D preview viewport for a [Spatial].\n"
 "See [method add_inspector_plugin] for an example of how to register a plugin."
 msgstr ""
+"Enregistre un nouveau [EditorSpatialGizmoPlugin]. Les greffons du "
+"manipulateur sont utilisés pour ajouter des manipulateurs personnalisés dans "
+"la fenêtre d'affichage 3D pour transformer un [Spatial].\n"
+"Voir [method add_inspector_greffon] pour un exemple sur comment enregistrer "
+"un greffon."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -27909,6 +28806,13 @@ msgid ""
 "This is used, for example, in shader editors to let the plugin know that it "
 "must apply the shader code being written by the user to the object."
 msgstr ""
+"Cette méthode est appelée lorsque l'éditeur est sur le point d'enregistrer "
+"le projet, passer à un autre onglet, etc. Il demande au greffon d'appliquer "
+"tout changement d'état qui serait en attente pour garder une certaine "
+"cohérence.\n"
+"Ceci est utilisé, par exemple, dans les éditeurs d'ombres pour signaler au "
+"greffon qu'il doit appliquer le shader d'ombre écrit par l'utilisateur à "
+"l'objet."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -27918,6 +28822,13 @@ msgid ""
 "code], the project will not run. The run is aborted immediately, so this "
 "also prevents all other plugins' [method build] methods from running."
 msgstr ""
+"Cette méthode est appelée lorsque l'éditeur est sur le point de lancer le "
+"projet. Le greffon peut ensuite effectuer les opérations requises avant le "
+"lancement du projet.\n"
+"Cette méthode doit retourner un booléen. Si cette méthode retourne "
+"[code]false[/code], le projet ne sera pas lancé. Le lancement sera "
+"immédiatement annulé, ce qui empêche également toutes les autres méthodes de "
+"fonctionnement des greffons."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -27925,24 +28836,34 @@ msgid ""
 "your plugin does not keep editing a currently existing node, or a node from "
 "the wrong scene."
 msgstr ""
+"Efface tout l'état et réinitialise à zéro l'objet modifié. Cela garantit que "
+"votre greffon ne maintient pas l'édition d'un nœud existant ou d'une autre "
+"scène."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
 "Called by the engine when the user disables the [EditorPlugin] in the Plugin "
 "tab of the project settings window."
 msgstr ""
+"Appelé par le moteur lorsque l'utilisateur désactive le [EditorPlugin] dans "
+"l'onglet Greffon de la fenêtre des paramètres du projet."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
 "This function is used for plugins that edit specific object types (nodes or "
 "resources). It requests the editor to edit the given object."
 msgstr ""
+"Cette fonction est utilisée pour les greffons qui modifient des types "
+"d'objets spécifiques (nœuds ou ressources). Il demande à l'éditeur de "
+"modifier l'objet spécifié."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
 "Called by the engine when the user enables the [EditorPlugin] in the Plugin "
 "tab of the project settings window."
 msgstr ""
+"Appelé par le moteur lorsque l'utilisateur active le [EditorPlugin] dans "
+"l'onglet Greffon de la fenêtre des paramètres du projet."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -27989,6 +28910,11 @@ msgid ""
 "You need to enable calling of this method by using [method "
 "set_force_draw_over_forwarding_enabled]."
 msgstr ""
+"Cette méthode est la même que [method forward_canvas_draw_over_viewport], "
+"sauf qu'elle est dessinée au-dessus de tout le reste. Utile quand vous avez "
+"besoin d'une calque supplémentaire qui s'affiche par dessus les autres.\n"
+"Vous devez activer l'appel de cette méthode en utilisant [method "
+"set_force_draw_over_forwarding_enabled]."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -28079,6 +29005,11 @@ msgid ""
 "You need to enable calling of this method by using [method "
 "set_force_draw_over_forwarding_enabled]."
 msgstr ""
+"Cette méthode est la même que [method forward_spatial_draw_over_viewport], "
+"sauf qu'elle est dessinée au-dessus de tout le reste. Utile quand vous avez "
+"besoin d'une calque supplémentaire qui s'affiche par dessus les autres.\n"
+"Vous devez activer l'appel de cette méthode en utilisant [method "
+"set_force_draw_over_forwarding_enabled]."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -28132,6 +29063,9 @@ msgid ""
 "breakpoints in the format ([code]script:line[/code]), for example: "
 "[code]res://path_to_script.gd:25[/code]."
 msgstr ""
+"C'est pour les éditeurs qui modifient des objets basés sur des scripts. Vous "
+"pouvez retourner une liste de points d'arrêt avec le format ([code]script:"
+"line[/code]), par exemple : [code]res://path_to_script.gd:25[/code]."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -28318,6 +29252,11 @@ msgid ""
 "Remember that you have to manage the visibility of all your editor controls "
 "manually."
 msgstr ""
+"Cette fonction sera appelée lorsqu'il est demandé à l'éditeur de devenir "
+"visible. Il est utilisé pour les greffons qui modifient un type d'objet "
+"spécifique.\n"
+"Rappelez-vous que vous devez gérer manuellement la visibilité de tous les "
+"contrôles de votre éditeur."
 
 #: doc/classes/EditorPlugin.xml
 msgid "Queue save the project's editor layout."
@@ -28390,6 +29329,9 @@ msgid ""
 "This method is called after the editor saves the project or when it's "
 "closed. It asks the plugin to save edited external scenes/resources."
 msgstr ""
+"Cette méthode est appelée après que l'éditeur enregistre le projet ou "
+"lorsqu'il est fermé. Il demande au greffon d'enregistrer les scènes et "
+"ressources externes modifiées."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -28398,6 +29340,11 @@ msgid ""
 "editor when their viewports are updated. You need to call this method only "
 "once and it will work permanently for this plugin."
 msgstr ""
+"Permet d'appeler [method forward_canvas_force_draw_over_viewport] pour "
+"l'éditeur 2D et [method forward_spatial_force_draw_over_viewport] pour "
+"l'éditeur 3D lorsque leurs fenêtres d'affichage sont mises à jour. Vous "
+"devez appeler cette méthode qu'une seule fois, et ça fonctionnera en "
+"permanence pour ce greffon."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -28405,6 +29352,9 @@ msgid ""
 "inside [method forward_spatial_gui_input]. It might be especially usable if "
 "your plugin will want to use raycast in the scene."
 msgstr ""
+"Utilisez cette méthode si vous voulez toujours recevoir les entrées dans "
+"l'écran d'aperçu 3D dans [method forward_spatial_gui_input]. Ça peut être "
+"utile si votre greffon veut utiliser un Raycast dans la scène."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -28461,6 +29411,11 @@ msgid ""
 "forward_spatial_draw_over_viewport] and [method "
 "forward_spatial_force_draw_over_viewport] to be called."
 msgstr ""
+"Met à jour des sur-couches de l'éditeur 2D et 3D. Fait que les méthodes "
+"[method forward_canvas_draw_over_viewport], [method "
+"forward_canvas_force_draw_over_viewport], [method "
+"forward_spatial_draw_over_viewport] et [method "
+"forward_spatial_force_draw_over_port] seront appelées."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -28477,6 +29432,9 @@ msgid ""
 "the root node of the scene that has just become active. If this scene is new "
 "and empty, the argument will be [code]null[/code]."
 msgstr ""
+"Émis lorsque la scène est changée dans l'éditeur. L'argument retournera le "
+"nœud racine de la scène qui vient de devenir active. Si cette scène est "
+"nouvelle et vide, l'argument sera [code]null[/code]."
 
 #: doc/classes/EditorPlugin.xml
 msgid ""
@@ -28508,6 +29466,8 @@ msgid ""
 "If any of the controls added can gain keyboard focus, add it here. This "
 "ensures that focus will be restored if the inspector is refreshed."
 msgstr ""
+"Si l'un des contrôles ajoutés peut récupérer le focus du clavier, ajoutez-le "
+"ici. Cela permettra de rétablir le focus si l'inspecteur est mis à jour."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
@@ -28517,6 +29477,11 @@ msgid ""
 "requesting this property to be refreshed (leave as [code]false[/code] if "
 "unsure)."
 msgstr ""
+"Si une ou plusieurs propriétés ont changé, cela doit être appelé. "
+"[code]field[/code] est utilisé au cas où votre éditeur peut modifier les "
+"champs séparément (par exemple : Vector3.x) L'argument [code]changing[/code] "
+"évite à l'éditeur de demander que cette propriété soit rafraîchie (laissez-"
+"le à [code]false[/code] en cas de doute)."
 
 #: doc/classes/EditorProperty.xml
 msgid "Gets the edited object."
@@ -28528,16 +29493,23 @@ msgid ""
 "[method EditorInspectorPlugin.parse_property]), then this will return the "
 "property."
 msgstr ""
+"Retourne la propriété modifiée. Si votre éditeur n'est que pour une seule "
+"propriété (ajouté par [method EditorInspectorPlugin.parse_property]), cela "
+"retournera la propriété."
 
 #: doc/classes/EditorProperty.xml
 msgid "Must be implemented to provide a custom tooltip to the property editor."
 msgstr ""
+"Doit être implémenté pour fournir un outil personnalisé dans l'éditeur de "
+"propriété."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
 "Puts the [code]editor[/code] control below the property label. The control "
 "must be previously added using [method Node.add_child]."
 msgstr ""
+"Place le contrôle [code]editor[/code] sous le label de la propriété. Le "
+"contrôle doit d'abord être ajouté avec [method Node.add_child]"
 
 #: doc/classes/EditorProperty.xml
 msgid "When this virtual function is called, you must update your editor."
@@ -28550,11 +29522,15 @@ msgid ""
 "Used by the inspector, set to [code]true[/code] when the property is "
 "checkable."
 msgstr ""
+"Utilisé par l'inspecteur, défini à [code]true[/code] lorsque la propriété "
+"peut être cochée."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
 "Used by the inspector, set to [code]true[/code] when the property is checked."
 msgstr ""
+"Utilisé par l'inspecteur, défini à [code]true[/code] quand la propriété est "
+"cochée."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
@@ -28562,6 +29538,9 @@ msgid ""
 "with the editor theme's warning color. This is used for editable children's "
 "properties."
 msgstr ""
+"Utilisé par l'inspecteur, définit à [code]true[/code] quand la propriété est "
+"affiché avec la couleur d'avertissement de l'éditeur. Ceci est utilisé pour "
+"les propriétés modifiables pour les nœuds enfants."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
@@ -28582,16 +29561,23 @@ msgid ""
 "Used by the inspector, set to [code]true[/code] when the property is read-"
 "only."
 msgstr ""
+"Utilisé par l'inspecteur, défini à [code]true[/code] quand la propriété est "
+"en lecture-seule."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
 "Emit it if you want multiple properties modified at the same time. Do not "
 "use if added via [method EditorInspectorPlugin.parse_property]."
 msgstr ""
+"Emettez-le si vous voulez plusieurs propriétés modifiées en même temps. Ne "
+"pas utiliser s'il a été ajouté avec [method EditorInspectorPlugin."
+"parse_property]"
 
 #: doc/classes/EditorProperty.xml
 msgid "Used by sub-inspectors. Emit it if what was selected was an Object ID."
 msgstr ""
+"Utilisé par des sous-inspecteurs. Émettez-le si l'identifiant d'un Object a "
+"été sélectionné."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
@@ -28609,10 +29595,14 @@ msgid ""
 "Emit it if you want to add this value as an animation key (check for keying "
 "being enabled first)."
 msgstr ""
+"Émettez-le si vous voulez ajouter cette valeur comme clé d'animation "
+"(vérifiez que la clé est d'abord activée)."
 
 #: doc/classes/EditorProperty.xml
 msgid "Emit it if you want to key a property with a single value."
 msgstr ""
+"Emettez-le si vous voulez définir une clé pour cette propriété avec une "
+"valeur unique."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
@@ -28622,6 +29612,11 @@ msgid ""
 "instantiated and can come from an ancestor scene in the inheritance/"
 "instancing chain, a script or a builtin class."
 msgstr ""
+"Émettez-le si vous voulez marquer (ou dé-marquer) la valeur d'une propriété "
+"pour être sauvegardée peu importe si elle est égale à la valeur par défaut.\n"
+"La valeur par défaut est celle que la propriété obtiendra lorsque le nœud "
+"est juste instancié et peut venir d'une scène instanciée ou héritée, d'un "
+"script ou d'une classe intégrée."
 
 #: doc/classes/EditorProperty.xml
 msgid ""
@@ -28649,6 +29644,13 @@ msgid ""
 "[b]Note:[/b] This [Control] does not include any editor for the resource, as "
 "editing is controlled by the Inspector dock itself or sub-Inspectors."
 msgstr ""
+"Ce nœud [Control] est utilisé dans la barre d'outils de l'inspecteur de "
+"l'éditeur pour permettre l'édition des propriétés de type [Resource]. Il "
+"offre des options pour créer, charger, enregistrer et convertir des "
+"ressources. Peut être utilisé avec [EditorInspectorPlugin] pour recréer le "
+"même comportement.\n"
+"[b]Note :[/b] Ce [Control] n'inclut aucun éditeur de la ressource, car "
+"l'édition est contrôlée par l'inspecteur lui-même ou les sous-inspecteurs."
 
 #: doc/classes/EditorResourcePicker.xml
 msgid ""
@@ -28656,12 +29658,17 @@ msgid ""
 "[member base_type]. If the [member base_type] is empty, an empty list is "
 "returned."
 msgstr ""
+"Retourne une liste de tous les types et sous-types autorisés correspondant "
+"au [member base_type]. Si le [member base_type] est vide, une liste vide est "
+"retournée."
 
 #: doc/classes/EditorResourcePicker.xml
 msgid ""
 "This virtual method can be implemented to handle context menu items not "
 "handled by default. See [method set_create_options]."
 msgstr ""
+"Cette méthode virtuelle peut être implémentée pour gérer les éléments du "
+"menu contextuel non gérés par défaut. Voir [method set_create_options]."
 
 #: doc/classes/EditorResourcePicker.xml
 msgid ""
@@ -28672,12 +29679,20 @@ msgid ""
 "[b]Note:[/b] Implement [method handle_menu_selected] to handle these custom "
 "items."
 msgstr ""
+"Cette méthode virtuelle est appelée lors de la mise à jour du menu "
+"contextuel de [EditorResourcePicker]. Implémenter cette méthode pour "
+"remplacer les éléments dans « Nouveau... » par vos propres options. "
+"[code]menu_nœud[/code] est une référence au nœud [PopupMenu].\n"
+"[b]Note :[/b] Implémentez [method handle_menu_sélection] pour traiter ces "
+"éléments personnalisés."
 
 #: doc/classes/EditorResourcePicker.xml
 msgid ""
 "Sets the toggle mode state for the main button. Works only if [member "
 "toggle_mode] is set to [code]true[/code]."
 msgstr ""
+"Définit l'état du mode de basculement pour le bouton principal. Fonctionne "
+"uniquement si [member toggle_mode] est défini à [code]true[/code]."
 
 #: doc/classes/EditorResourcePicker.xml
 msgid ""
@@ -28700,6 +29715,9 @@ msgid ""
 "If [code]true[/code], the main button with the resource preview works in the "
 "toggle mode. Use [method set_toggle_pressed] to manually set the state."
 msgstr ""
+"Si [code]true[/code], le bouton principal avec la prévisualisation des "
+"ressources fonctionne avec le mode de basculement. Utilisez [method "
+"set_toggle_pressed] pour définir manuellement cet état."
 
 #: doc/classes/EditorResourcePicker.xml
 #, fuzzy
@@ -28712,6 +29730,9 @@ msgid ""
 "[code]edit[/code] is [code]true[/code], the signal was caused by the context "
 "menu \"Edit\" option."
 msgstr ""
+"Émis lorsque la valeur de ressource a été définie et que l'utilisateur a "
+"cliqué pour la modifier. Lorsque [code]edit[/code] est [code]true[/code], le "
+"signal a été causé par le menu contextuel \"Édition\"."
 
 #: doc/classes/EditorResourcePreview.xml
 msgid "Helper to generate previews of resources or files."
@@ -28723,6 +29744,11 @@ msgid ""
 "[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
 "the singleton using [method EditorInterface.get_resource_previewer]."
 msgstr ""
+"Cet objet est utilisé pour générer des aperçus pour les ressources de "
+"fichiers.\n"
+"[b]Note :[/b] Cette classe ne devrait pas être instanciée directement. "
+"Accédez plutôt à l'instance unique en utilisant [method EditorInterface."
+"get_resource_previewer]"
 
 #: doc/classes/EditorResourcePreview.xml
 msgid "Create an own, custom preview generator."
@@ -28733,6 +29759,8 @@ msgid ""
 "Check if the resource changed, if so, it will be invalidated and the "
 "corresponding signal emitted."
 msgstr ""
+"Vérifiez si la ressource a changé, si oui, elle sera invalidée et le signal "
+"correspondant émis."
 
 #: doc/classes/EditorResourcePreview.xml
 msgid ""
@@ -28792,6 +29820,8 @@ msgid ""
 "Emitted if a preview was invalidated (changed). [code]path[/code] "
 "corresponds to the path of the preview."
 msgstr ""
+"Émis si un aperçu a été invalidé (c'est-à-dire changé). [code]path[/code] "
+"correspond au chemin de l'aperçu."
 
 #: doc/classes/EditorResourcePreviewGenerator.xml
 msgid "Custom generator of previews."
@@ -28803,6 +29833,9 @@ msgid ""
 "thumbnail_size[/code] in [EditorSettings] to find out the right size to do "
 "previews at."
 msgstr ""
+"Le Code personnalisé pour générer des aperçus. Veuillez cocher "
+"[code]file_dialog/thumbnail_size[/code] dans [EditorSettings] pour connaître "
+"la taille correcte des prévisualisations."
 
 #: doc/classes/EditorResourcePreviewGenerator.xml
 msgid ""
@@ -28925,6 +29958,10 @@ msgid ""
 "to [EditorSceneImporterGLTF] within a script will cause an error in an "
 "exported project."
 msgstr ""
+"[b]Note :[/b] Cette classe n'est compilée que pour les éditeurs. Le "
+"chargement et l'enregistrement au format glTF [i]n'est pas[/i] disponible "
+"dans les projets exportés. Les références à [EditorSceneImporterGLTF] dans "
+"un script provoquent une erreur dans un projet exporté."
 
 #: doc/classes/EditorScenePostImport.xml
 msgid "Post-processes scenes after import."
@@ -29001,6 +30038,8 @@ msgid ""
 "Called after the scene was imported. This method must return the modified "
 "version of the scene."
 msgstr ""
+"Appelé après l'importation de la scène. Cette méthode doit retourner la "
+"version modifiée de la scène."
 
 #: doc/classes/EditorScript.xml
 msgid "Base script that can be used to add extension functions to the editor."
@@ -29057,6 +30096,10 @@ msgid ""
 "Adds [code]node[/code] as a child of the root node in the editor context.\n"
 "[b]Warning:[/b] The implementation of this method is currently disabled."
 msgstr ""
+"Ajoute [code]node[/code] comme enfant du nœud racine dans le contexte de "
+"l'éditeur.\n"
+"[b]Avertissement :[/b] L'implémentation de cette méthode est actuellement "
+"désactivée."
 
 #: doc/classes/EditorScript.xml
 msgid "Returns the [EditorInterface] singleton instance."
@@ -29071,6 +30114,8 @@ msgid ""
 "Godot editor's control for selecting the [code]script[/code] property of a "
 "[Node]."
 msgstr ""
+"Le contrôle de l'éditeur Godot pour sélectionner la propriété [code]script[/"
+"code] d'un [Node]."
 
 #: doc/classes/EditorScriptPicker.xml
 msgid ""
@@ -29107,6 +30152,10 @@ msgid ""
 "[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
 "the singleton using [method EditorInterface.get_selection]."
 msgstr ""
+"Cet objet gère la sélection dans le SceneTree dans l'éditeur.\n"
+"[b]Note :[/b] Cette classe ne devrait pas être instanciée directement. "
+"Accédez plutôt à l'instance unique en utilisant [method EditorInterface."
+"get_selection]"
 
 #: doc/classes/EditorSelection.xml
 msgid ""
@@ -29115,6 +30164,10 @@ msgid ""
 "inspector. If you want to edit a node, use [method EditorInterface."
 "edit_node]."
 msgstr ""
+"Ajoute un nœud à la sélection.\n"
+"[b]Note :[/b] Le nouveau nœud sélectionné ne sera pas automatiquement "
+"modifié dans l'inspecteur. Si vous souhaitez modifier un nœud, utilisez "
+"[method EditorInterface.edit_nœud]."
 
 #: doc/classes/EditorSelection.xml
 msgid "Clear the selection."
@@ -29130,6 +30183,10 @@ msgid ""
 "moving them, rotating, etc). This list avoids situations where a node is "
 "selected and also child/grandchild."
 msgstr ""
+"Retourne la liste des nœuds sélectionnés, optimisés pour les opérations de "
+"transformation (c'est-à-dire le fait de les déplacer, les faire pivoter, "
+"etc.). Cette liste évite les situations où un nœud est sélectionné et mais "
+"aussi ses descendants."
 
 #: doc/classes/EditorSelection.xml
 msgid "Removes a node from the selection."
@@ -29244,6 +30301,10 @@ msgid ""
 "[code]key[/code] specified. If the metadata doesn't exist, [code]default[/"
 "code] will be returned instead. See also [method set_project_metadata]."
 msgstr ""
+"Retourne les métadonnées spécifiques au projet pour la [code]section[/code] "
+"et [code]key[/code] spécifiées. Si les métadonnées n'existent pas, "
+"[code]default[/code] sera retourné à la place. Voir aussi [method "
+"set_project_metadata]."
 
 #: doc/classes/EditorSettings.xml
 msgid ""
@@ -29268,6 +30329,8 @@ msgid ""
 "Returns the value of the setting specified by [code]name[/code]. This is "
 "equivalent to using [method Object.get] on the EditorSettings instance."
 msgstr ""
+"Retourne la valeur du paramètre spécifié par [code]name[/code]. Ceci est "
+"équivalent à l'utiliser [method Object.get] sur l'instance EditorSettings."
 
 #: doc/classes/EditorSettings.xml
 msgid ""
@@ -29297,6 +30360,10 @@ msgid ""
 "When this method returns [code]true[/code], a Revert button will display "
 "next to the setting in the Editor Settings."
 msgstr ""
+"Retourne [code]true[/code] si le paramètre spécifié par [code]name[/code] "
+"peut avoir sa valeur rétablie à cette par défaut, ou [code]false[/code] "
+"sinon. Lorsque cette méthode retourne [code]true[/code], un bouton Rétablir "
+"s'affichera à côté du réglage dans les paramètres de l'éditeur."
 
 #: doc/classes/EditorSettings.xml
 msgid ""
@@ -29304,6 +30371,9 @@ msgid ""
 "This is the value that would be applied when clicking the Revert button in "
 "the Editor Settings."
 msgstr ""
+"Retourne la valeur par défaut du paramètre spécifié par [code]name[/code]. "
+"C'est la valeur qui sera appliquée en cliquant sur le bouton Rétablir dans "
+"les paramètres de l'éditeur."
 
 #: doc/classes/EditorSettings.xml
 msgid "Sets the list of favorite files and directories for this project."
@@ -29329,6 +30399,11 @@ msgid ""
 "project folder and therefore won't be checked into version control. See also "
 "[method get_project_metadata]."
 msgstr ""
+"Définit des métadonnées spécifiques au projet dans la [code]section[/code], "
+"la [code]key[/code] et les [code]data[/code] spécifiées. Ces métadonnées "
+"sont enregistrées à l'extérieur du dossier du projet, et donc pas dans le "
+"système de contrôle de version (Git, etc.). Voir aussi [method "
+"get_project_metadata]."
 
 #: doc/classes/EditorSettings.xml
 msgid ""
@@ -29344,6 +30419,9 @@ msgid ""
 "This is equivalent to using [method Object.set] on the EditorSettings "
 "instance."
 msgstr ""
+"Définit la [code]value[/code] du paramètre nommé [code]name[/code]. Cela "
+"équivaut à l'utilisation de [method Object.set] sur l'instance "
+"EditorSettings."
 
 #: doc/classes/EditorSettings.xml
 msgid "Emitted after any editor setting has changed."
@@ -29355,6 +30433,9 @@ msgid ""
 "plugins to update their visuals on theme changes or logic on configuration "
 "changes."
 msgstr ""
+"Émis après que n'importe quel réglage de l'édiateur a changé. Il est utilisé "
+"par divers greffons de l'éditeurs pour mettre à jour leur affichage lors de "
+"changements de thème ou de configuration."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid "Custom gizmo for editing Spatial objects."
@@ -29366,12 +30447,18 @@ msgid ""
 "(handles) for 3D Spatial objects. See [EditorSpatialGizmoPlugin] for more "
 "information."
 msgstr ""
+"Un manipulateur personnalisé qui est utilisé pour la visualisation et "
+"l'édition personnalisées (poignets) pour les objets 3D de type Spatial. Voir "
+"[EditorSpatialGizmoPlugin] pour plus d'informations."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid ""
 "Adds the specified [code]segments[/code] to the gizmo's collision shape for "
 "picking. Call this function during [method redraw]."
 msgstr ""
+"Ajoute le [code]segments[/code] spécifié à la forme de collision du "
+"manipulateur pour la sélection. Appelez cette fonction durant [method "
+"redraw]."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid ""
@@ -29379,6 +30466,9 @@ msgid ""
 "generated from a regular [Mesh] too. Call this function during [method "
 "redraw]."
 msgstr ""
+"Ajoute des triangles de collision au manipulateur pour la sélection. Un "
+"[TriangleMesh] peut être généré à partir d'un [Mesh] régulier. Appelez cette "
+"fonction durant [method redraw]."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid ""
@@ -29387,6 +30477,10 @@ msgid ""
 "There are virtual functions which will be called upon editing of these "
 "handles. Call this function during [method redraw]."
 msgstr ""
+"Ajoute une liste de poignées (points) qui peuvent être utilisées pour "
+"déformer l'objet en cours d'édition.\n"
+"Il y a des fonctions virtuelles qui seront appelés à l'édition de ces "
+"poignées. Appelez cette fonction durant [method redraw]."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid ""
@@ -29394,6 +30488,9 @@ msgid ""
 "lines are used for visualizing the gizmo. Call this function during [method "
 "redraw]."
 msgstr ""
+"Ajoute des lignes au gizmo (une liste de paires de points), avec un matériau "
+"donné. Les lignes sont utilisées pour visualiser le manipulateur. Appelez "
+"cette fonction durant [method redraw]."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid ""
@@ -29402,6 +30499,11 @@ msgid ""
 "is [code]true[/code], the mesh will rotate to always face the camera. Call "
 "this function during [method redraw]."
 msgstr ""
+"Ajoute un maillage au manipulateur avec l'état [code]billboard[/code] "
+"spécifié, [code]skeleton[/code] et [code]material[/code]. Si "
+"[code]billboard[/code] est [code]true[/code], le maillage tourne pour "
+"toujours faire toujours face à la caméra. Appelez cette fonction durant "
+"[method redraw]."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid ""
@@ -29430,18 +30532,28 @@ msgid ""
 "by [method add_handles]).\n"
 "Handles can be named for reference to the user when editing."
 msgstr ""
+"Retourne le nom d'une poignée modifiée (ces poignées doivent d'abord être "
+"ajoutées avec [méthode add_handles]).\n"
+"Les poignées peuvent être nommées pour référence à l'utilisateur lors de "
+"l'édition."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid ""
 "Gets actual value of a handle. This value can be anything and used for "
 "eventually undoing the motion when calling [method commit_handle]."
 msgstr ""
+"Retourne la valeur réelle d'une poignée. Cette valeur peut être n'importe "
+"quoi et utilisée pour finalement annuler le mouvement en appelant [method "
+"commit_handle]."
 
 #: doc/classes/EditorSpatialGizmo.xml
 msgid ""
 "Returns the [EditorSpatialGizmoPlugin] that owns this gizmo. It's useful to "
 "retrieve materials using [method EditorSpatialGizmoPlugin.get_material]."
 msgstr ""
+"Retourne le [EditorSpatialGizmoPlugin] qui possède ce manipulateur. Il est "
+"utile de récupérer les matériaux en utilisant [method "
+"EditorSpatialGizmoPlugin.get_material]"
 
 #: doc/classes/EditorSpatialGizmo.xml
 #, fuzzy
@@ -29524,6 +30636,9 @@ msgid ""
 "nodes of your choice, return [code]null[/code] for the rest of nodes. See "
 "also [method has_gizmo]."
 msgstr ""
+"Surchargez cette méthode pour retourner un [EditorSpatialGizmo] personnalisé "
+"pour les nœuds spatiaux de votre choix, retourner [code]null[/code] pour le "
+"reste des nœuds. Voir aussi [method has_gizmo]."
 
 #: doc/classes/EditorSpatialGizmoPlugin.xml
 msgid ""
@@ -29533,6 +30648,12 @@ msgid ""
 "Should not be overridden.\n"
 "You can optionally provide a texture to use instead of the default icon."
 msgstr ""
+"Crée un matériau de poignée avec ses variantes (sélectionnées et/ou "
+"modifiables) et les ajoute à la liste interne des matériaux. Ils peuvent "
+"ensuite être consultés avec [method get_material] et utilisés dans [method "
+"EditorSpatialGizmo.add_handles] Ne devrait pas être surchargé.\n"
+"Vous pouvez en option fournir une texture à utiliser à la place de l'icône "
+"par défaut."
 
 #: doc/classes/EditorSpatialGizmoPlugin.xml
 msgid ""
@@ -29541,6 +30662,10 @@ msgid ""
 "[method get_material] and used in [method EditorSpatialGizmo."
 "add_unscaled_billboard]. Should not be overridden."
 msgstr ""
+"Crée un matériau d'icône avec ses variantes (sélectionnées et/ou "
+"modifiables) et les ajoute à la liste interne des matériaux. Ils peuvent "
+"ensuite être consultés avec [method get_material] et utilisés dans [method "
+"EditorSpatialGizmo.add_unscaled_billboard]. Ne devrait pas être surchargé."
 
 #: doc/classes/EditorSpatialGizmoPlugin.xml
 msgid ""
@@ -29549,6 +30674,11 @@ msgid ""
 "[method get_material] and used in [method EditorSpatialGizmo.add_mesh] and "
 "[method EditorSpatialGizmo.add_lines]. Should not be overridden."
 msgstr ""
+"Crée un matériau non éclairé avec ses variantes (sélectionnées et/ou "
+"modifiables) et les ajoute à la liste interne des matériaux. Ils peuvent "
+"ensuite être consultés avec [method get_material] et utilisés dans [method "
+"EditorSpatialGizmo.add_mesh] et [method EditorSpatialGizmo.add_lines]. Ne "
+"devrait pas être dépassé."
 
 #: doc/classes/EditorSpatialGizmoPlugin.xml
 msgid ""
@@ -36815,13 +37945,14 @@ msgstr "Nombre maximal de redirections autorisées."
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -38376,9 +39507,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -39018,10 +40149,13 @@ msgstr "Type d’évènement d’entrée pour les évènements de mouvement de s
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -39033,6 +40167,15 @@ msgid "Mouse and input coordinates"
 msgstr "Les coordonnées de la souris"
 
 #: doc/classes/InputEventMouseMotion.xml
+#, fuzzy
+msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+"Retourne le nombre de disposition de clavier.\n"
+"[b]Note :[/b] Cette méthode est implémentée sous Linux, macOS et Windows."
+
+#: doc/classes/InputEventMouseMotion.xml
 msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
@@ -55463,6 +56606,14 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr "Change l'octet à la position donnée."
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+#, fuzzy
+msgid "Sorts the elements of the array in ascending order."
+msgstr "Retire l' élément du tableau à l'index donné."
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -59009,9 +60160,8 @@ msgid "Optional name for the 3D render layer 13."
 msgstr "Le nom facultatif pour le calque 13 de rendu 3D."
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid "Optional name for the 3D render layer 14."
-msgstr "Le nom facultatif pour le calque 14 de rendu 3D"
+msgstr "Le nom facultatif pour le calque 14 de rendu 3D."
 
 #: doc/classes/ProjectSettings.xml
 msgid "Optional name for the 3D render layer 15."
@@ -65245,7 +66395,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -65285,15 +66436,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -66922,11 +68074,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr "La [Transform] globale de ce nœud."
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -78161,11 +79332,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -78246,8 +79417,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/gl.po b/doc/translations/gl.po
index 3273cd8f98..17fb042ad7 100644
--- a/doc/translations/gl.po
+++ b/doc/translations/gl.po
@@ -9966,7 +9966,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10131,7 +10137,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28411,13 +28423,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29831,9 +29844,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30407,10 +30420,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30423,6 +30439,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45290,6 +45312,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54214,7 +54243,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54254,15 +54284,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55738,11 +55769,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65759,11 +65809,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65843,8 +65893,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/hi.po b/doc/translations/hi.po
index 361c131a40..98778940cf 100644
--- a/doc/translations/hi.po
+++ b/doc/translations/hi.po
@@ -9965,7 +9965,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10130,7 +10136,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28410,13 +28422,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29830,9 +29843,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30406,10 +30419,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30422,6 +30438,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45289,6 +45311,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54213,7 +54242,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54253,15 +54283,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55737,11 +55768,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65758,11 +65808,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65842,8 +65892,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/hu.po b/doc/translations/hu.po
index 2732b7b56a..325d7d0f52 100644
--- a/doc/translations/hu.po
+++ b/doc/translations/hu.po
@@ -9984,7 +9984,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10149,7 +10155,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28429,13 +28441,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29849,9 +29862,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30425,10 +30438,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30441,6 +30457,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45308,6 +45330,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54232,7 +54261,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54272,15 +54302,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55756,11 +55787,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65777,11 +65827,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65861,8 +65911,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/id.po b/doc/translations/id.po
index efc379cffd..eb95a98f22 100644
--- a/doc/translations/id.po
+++ b/doc/translations/id.po
@@ -15,12 +15,13 @@
 # ProgrammerIndonesia 44 <elo.jhy@gmail.com>, 2022.
 # Reza Almanda <rezaalmanda27@gmail.com>, 2022.
 # Tsaqib Fadhlurrahman Soka <sokatsaqib@gmail.com>, 2022.
+# yusuf afandi <afandi.yusuf.04@gmail.com>, 2022.
 msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-05-28 14:11+0000\n"
-"Last-Translator: Reza Almanda <rezaalmanda27@gmail.com>\n"
+"PO-Revision-Date: 2022-07-09 21:12+0000\n"
+"Last-Translator: yusuf afandi <afandi.yusuf.04@gmail.com>\n"
 "Language-Team: Indonesian <https://hosted.weblate.org/projects/godot-engine/"
 "godot-class-reference/id/>\n"
 "Language: id\n"
@@ -28,7 +29,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.13-dev\n"
+"X-Generator: Weblate 4.13.1-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -122,7 +123,7 @@ msgstr "Metode ini menerima sejumlah argumen setelah yang dijelaskan di sini."
 
 #: doc/tools/make_rst.py
 msgid "This method is used to construct a type."
-msgstr ""
+msgstr "Metode ini digunakan untuk mengkonstruksi sebuah tipe."
 
 #: doc/tools/make_rst.py
 msgid ""
@@ -10377,7 +10378,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10542,7 +10549,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28835,13 +28848,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30255,9 +30269,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30831,10 +30845,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30847,6 +30864,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45755,6 +45778,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54682,7 +54712,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54722,15 +54753,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56206,11 +56238,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66234,11 +66285,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66318,8 +66369,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/is.po b/doc/translations/is.po
index bdd631ef18..c68a096dfa 100644
--- a/doc/translations/is.po
+++ b/doc/translations/is.po
@@ -9965,7 +9965,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10130,7 +10136,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28410,13 +28422,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29830,9 +29843,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30406,10 +30419,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30422,6 +30438,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45289,6 +45311,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54213,7 +54242,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54253,15 +54283,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55737,11 +55768,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65758,11 +65808,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65842,8 +65892,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/it.po b/doc/translations/it.po
index 3d9cd62b30..fd78bc8f1c 100644
--- a/doc/translations/it.po
+++ b/doc/translations/it.po
@@ -10991,7 +10991,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -11156,7 +11162,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -29595,13 +29607,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -31020,9 +31033,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31597,10 +31610,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -31612,6 +31628,13 @@ msgid "Mouse and input coordinates"
 msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
+#, fuzzy
+msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr "Ritorna [code]true[/code] se [code]s[/code] è zero o quasi zero."
+
+#: doc/classes/InputEventMouseMotion.xml
 msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
@@ -46611,6 +46634,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -55551,7 +55581,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55591,15 +55622,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -57077,11 +57109,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -67192,11 +67243,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -67276,8 +67327,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/ja.po b/doc/translations/ja.po
index 8ace2ec0c8..324df4d9ae 100644
--- a/doc/translations/ja.po
+++ b/doc/translations/ja.po
@@ -12677,8 +12677,14 @@ msgstr ""
 "ます。"
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
-msgstr "このオーディオが再生されているバス。"
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
+msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
 msgid ""
@@ -12860,9 +12866,14 @@ msgstr ""
 "ます。"
 
 #: doc/classes/AudioStreamPlayer3D.xml
-#, fuzzy
-msgid "The bus on which this audio is playing."
-msgstr "このオーディオが再生されているバス。"
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
+msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
@@ -31648,13 +31659,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -33082,9 +33094,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -33658,10 +33670,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -33673,6 +33688,14 @@ msgid "Mouse and input coordinates"
 msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
+#, fuzzy
+msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+"文字列の長さが [code]0[/code] に等しければ [code]true[/code] を返します。"
+
+#: doc/classes/InputEventMouseMotion.xml
 msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
@@ -48785,6 +48808,14 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+#, fuzzy
+msgid "Sorts the elements of the array in ascending order."
+msgstr "インデックスにより配列から要素を削除します。"
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -57800,7 +57831,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -57840,15 +57872,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -59334,11 +59367,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -69788,11 +69840,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -69872,8 +69924,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/ko.po b/doc/translations/ko.po
index bd808074b9..2f6879593c 100644
--- a/doc/translations/ko.po
+++ b/doc/translations/ko.po
@@ -10141,7 +10141,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10306,7 +10312,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28713,13 +28725,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30141,9 +30154,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30717,10 +30730,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30733,6 +30749,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45796,6 +45818,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54725,7 +54754,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54765,15 +54795,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56249,11 +56280,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66291,11 +66341,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66375,8 +66425,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/lt.po b/doc/translations/lt.po
index 2de21d55b3..2468d389d3 100644
--- a/doc/translations/lt.po
+++ b/doc/translations/lt.po
@@ -9975,7 +9975,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10140,7 +10146,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28420,13 +28432,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29840,9 +29853,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30416,10 +30429,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30432,6 +30448,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45299,6 +45321,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54223,7 +54252,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54263,15 +54293,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55747,11 +55778,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65768,11 +65818,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65852,8 +65902,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/lv.po b/doc/translations/lv.po
index 45e3188446..9faf7fd017 100644
--- a/doc/translations/lv.po
+++ b/doc/translations/lv.po
@@ -9980,7 +9980,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10145,7 +10151,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28428,13 +28440,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29848,9 +29861,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30424,10 +30437,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30440,6 +30456,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45307,6 +45329,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54231,7 +54260,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54271,15 +54301,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55755,11 +55786,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65776,11 +65826,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65860,8 +65910,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/mr.po b/doc/translations/mr.po
index b943c79052..c989fcc549 100644
--- a/doc/translations/mr.po
+++ b/doc/translations/mr.po
@@ -9963,7 +9963,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10128,7 +10134,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28408,13 +28420,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29828,9 +29841,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30404,10 +30417,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30420,6 +30436,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45287,6 +45309,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54211,7 +54240,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54251,15 +54281,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55735,11 +55766,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65756,11 +65806,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65840,8 +65890,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/nb.po b/doc/translations/nb.po
index 53fca58f26..8017f4006b 100644
--- a/doc/translations/nb.po
+++ b/doc/translations/nb.po
@@ -9975,7 +9975,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10140,7 +10146,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28420,13 +28432,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29840,9 +29853,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30416,10 +30429,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30432,6 +30448,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45299,6 +45321,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54223,7 +54252,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54263,15 +54293,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55747,11 +55778,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65768,11 +65818,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65852,8 +65902,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/ne.po b/doc/translations/ne.po
index 24062d3cff..9a17a51fb6 100644
--- a/doc/translations/ne.po
+++ b/doc/translations/ne.po
@@ -9963,7 +9963,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10128,7 +10134,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28408,13 +28420,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29828,9 +29841,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30404,10 +30417,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30420,6 +30436,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45287,6 +45309,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54211,7 +54240,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54251,15 +54281,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55735,11 +55766,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65756,11 +65806,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65840,8 +65890,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/nl.po b/doc/translations/nl.po
index b2066a5491..d36175b6c2 100644
--- a/doc/translations/nl.po
+++ b/doc/translations/nl.po
@@ -10032,7 +10032,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10197,7 +10203,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28480,13 +28492,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29900,9 +29913,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30476,10 +30489,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30492,6 +30508,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45359,6 +45381,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54284,7 +54313,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54324,15 +54354,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55808,11 +55839,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65829,11 +65879,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65913,8 +65963,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/pl.po b/doc/translations/pl.po
index b28e575320..343dfb0050 100644
--- a/doc/translations/pl.po
+++ b/doc/translations/pl.po
@@ -10471,7 +10471,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10636,7 +10642,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28986,13 +28998,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30409,9 +30422,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30985,10 +30998,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -31001,6 +31017,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -46003,6 +46025,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54943,7 +54972,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54983,15 +55013,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56468,11 +56499,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66529,11 +66579,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66613,8 +66663,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/pt.po b/doc/translations/pt.po
index 99537cdd6b..fdb01b1579 100644
--- a/doc/translations/pt.po
+++ b/doc/translations/pt.po
@@ -10787,7 +10787,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10952,7 +10958,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -29301,13 +29313,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30721,9 +30734,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31297,10 +31310,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -31313,6 +31329,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -46238,6 +46260,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -55231,7 +55260,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55271,15 +55301,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56757,11 +56788,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66821,11 +66871,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66905,8 +66955,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/pt_BR.po b/doc/translations/pt_BR.po
index b432963519..50d4359c46 100644
--- a/doc/translations/pt_BR.po
+++ b/doc/translations/pt_BR.po
@@ -11025,7 +11025,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -11190,7 +11196,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -29629,13 +29641,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -31054,9 +31067,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31630,10 +31643,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -31646,6 +31662,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -46651,6 +46673,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -55595,7 +55624,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55635,15 +55665,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -57123,11 +57154,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -67221,11 +67271,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -67305,8 +67355,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/ro.po b/doc/translations/ro.po
index 068587e37a..8c7112f102 100644
--- a/doc/translations/ro.po
+++ b/doc/translations/ro.po
@@ -9995,7 +9995,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10160,7 +10166,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28443,13 +28455,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29863,9 +29876,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30439,10 +30452,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30455,6 +30471,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45323,6 +45345,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54247,7 +54276,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54287,15 +54317,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55771,11 +55802,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65792,11 +65842,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65876,8 +65926,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/ru.po b/doc/translations/ru.po
index 6455a611e5..1596ca8553 100644
--- a/doc/translations/ru.po
+++ b/doc/translations/ru.po
@@ -11644,7 +11644,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -11809,7 +11815,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -30308,13 +30320,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -31732,9 +31745,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -32308,10 +32321,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -32323,6 +32339,15 @@ msgid "Mouse and input coordinates"
 msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
+#, fuzzy
+msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+"Возвращает [code]true[/code] если [code]a[/code] и [code]b[/code] "
+"приблизительно равны друг другу."
+
+#: doc/classes/InputEventMouseMotion.xml
 msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
@@ -47447,6 +47472,14 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+#, fuzzy
+msgid "Sorts the elements of the array in ascending order."
+msgstr "Удаляет элемент из массива по индексу."
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -56470,7 +56503,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56510,15 +56544,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -58001,11 +58036,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -68262,11 +68316,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -68346,8 +68400,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/sk.po b/doc/translations/sk.po
index 4964bf3ce0..38e701eef9 100644
--- a/doc/translations/sk.po
+++ b/doc/translations/sk.po
@@ -9966,7 +9966,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10131,7 +10137,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28414,13 +28426,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29834,9 +29847,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30410,10 +30423,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30426,6 +30442,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45293,6 +45315,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54217,7 +54246,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54257,15 +54287,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55741,11 +55772,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65762,11 +65812,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65846,8 +65896,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/sr_Cyrl.po b/doc/translations/sr_Cyrl.po
index 89efbf0d11..3984d209f4 100644
--- a/doc/translations/sr_Cyrl.po
+++ b/doc/translations/sr_Cyrl.po
@@ -9977,7 +9977,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10142,7 +10148,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28425,13 +28437,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29845,9 +29858,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30421,10 +30434,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30437,6 +30453,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45304,6 +45326,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54228,7 +54257,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54268,15 +54298,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55752,11 +55783,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65773,11 +65823,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65857,8 +65907,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/sv.po b/doc/translations/sv.po
index e562fe9d6f..9be24493d7 100644
--- a/doc/translations/sv.po
+++ b/doc/translations/sv.po
@@ -9966,7 +9966,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10131,7 +10137,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28411,13 +28423,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29831,9 +29844,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30407,10 +30420,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30423,6 +30439,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45290,6 +45312,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54214,7 +54243,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54254,15 +54284,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55738,11 +55769,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65759,11 +65809,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65843,8 +65893,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/th.po b/doc/translations/th.po
index 097eae8507..dabf3c09f3 100644
--- a/doc/translations/th.po
+++ b/doc/translations/th.po
@@ -10072,7 +10072,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10237,7 +10243,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28530,13 +28542,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29972,9 +29985,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30564,10 +30577,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30580,6 +30596,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45541,6 +45563,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54475,7 +54504,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54515,15 +54545,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55999,11 +56030,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66040,11 +66090,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66124,8 +66174,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/tl.po b/doc/translations/tl.po
index 7473388512..b100d0e612 100644
--- a/doc/translations/tl.po
+++ b/doc/translations/tl.po
@@ -10046,7 +10046,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10211,7 +10217,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28500,13 +28512,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29920,9 +29933,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30496,10 +30509,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30512,6 +30528,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45406,6 +45428,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54330,7 +54359,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54370,15 +54400,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55854,11 +55885,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -65884,11 +65934,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -65968,8 +66018,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/tr.po b/doc/translations/tr.po
index 77fbf5f31a..dc9d2524b7 100644
--- a/doc/translations/tr.po
+++ b/doc/translations/tr.po
@@ -10753,7 +10753,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10918,7 +10924,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -29252,13 +29264,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30674,9 +30687,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -31250,10 +31263,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -31266,6 +31282,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -46231,6 +46253,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -55167,7 +55196,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55207,15 +55237,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56691,11 +56722,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66739,11 +66789,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66823,8 +66873,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/uk.po b/doc/translations/uk.po
index fe1ac7f153..afedf189b4 100644
--- a/doc/translations/uk.po
+++ b/doc/translations/uk.po
@@ -10125,7 +10125,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10290,7 +10296,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28608,13 +28620,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30030,9 +30043,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30606,10 +30619,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30622,6 +30638,12 @@ msgstr "Мишка і координати введення"
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45563,6 +45585,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54492,7 +54521,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54532,15 +54562,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56017,11 +56048,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66064,11 +66114,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66148,8 +66198,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/vi.po b/doc/translations/vi.po
index 4dbfaf376a..ab16aa1782 100644
--- a/doc/translations/vi.po
+++ b/doc/translations/vi.po
@@ -10420,7 +10420,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10585,7 +10591,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28905,13 +28917,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -30328,9 +30341,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30904,10 +30917,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30920,6 +30936,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45875,6 +45897,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54813,7 +54842,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54853,15 +54883,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -56339,11 +56370,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66389,11 +66439,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66473,8 +66523,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
diff --git a/doc/translations/zh_CN.po b/doc/translations/zh_CN.po
index 2888f15fd1..d2179a01f2 100644
--- a/doc/translations/zh_CN.po
+++ b/doc/translations/zh_CN.po
@@ -62,7 +62,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Godot Engine class reference\n"
 "Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-07-05 23:52+0000\n"
+"PO-Revision-Date: 2022-07-17 07:14+0000\n"
 "Last-Translator: Haoyu Qiu <timothyqiu32@gmail.com>\n"
 "Language-Team: Chinese (Simplified) <https://hosted.weblate.org/projects/"
 "godot-engine/godot-class-reference/zh_Hans/>\n"
@@ -71,7 +71,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8-bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Weblate 4.13.1-dev\n"
+"X-Generator: Weblate 4.14-dev\n"
 
 #: doc/tools/make_rst.py
 msgid "Description"
@@ -507,7 +507,7 @@ msgid ""
 "a = dectime(60, 10, 0.1)) # a is 59.0\n"
 "[/codeblock]"
 msgstr ""
-"[b]注意：[/b][code]dectime[/code] 已被废弃，将在 Godot 4.0 中删除，请使用 "
+"[b]注意：[/b][code]dectime[/code] 已被废弃，将在 Godot 4.0 中移除，请使用 "
 "[method move_toward] 代替。\n"
 "返回 [code]value[/code] 减去 [code]step[/code] * [code]amount[/code] 的结"
 "果。\n"
@@ -570,7 +570,6 @@ msgstr ""
 "将（之前使用 [method inst2dict] 创建的）字典转换回实例。适用于反序列化。"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Returns an \"eased\" value of [code]x[/code] based on an easing function "
 "defined with [code]curve[/code]. This easing function is based on an "
@@ -590,9 +589,9 @@ msgid ""
 "See also [method smoothstep]. If you need to perform more advanced "
 "transitions, use [Tween] or [AnimationPlayer]."
 msgstr ""
-"返回 [code]x[/code] “缓动后”的值，结果基于使用 [code]curve[/code] 值定义的缓"
-"动函数。该缓动函数是基于指数的。[code]curve[/code] 值可以是任意浮点数，具体数"
-"值会导致以下行为：\n"
+"返回 [code]x[/code]“缓动后”的值，结果基于使用 [code]curve[/code] 值定义的缓动"
+"函数。该缓动函数是基于指数的。[code]curve[/code] 值可以是任意浮点数，具体数值"
+"会导致以下行为：\n"
 "[codeblock]\n"
 "- 低于 -1.0（开区间）：缓入缓出\n"
 "- -1.0：线性\n"
@@ -602,9 +601,9 @@ msgstr ""
 "- 1.0：线性\n"
 "- 大于 1.0（开区间）：缓入\n"
 "[/codeblock]\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.4/img/"
+"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.5/img/"
 "ease_cheatsheet.png]ease() 曲线值速查表[/url]\n"
-"请参阅 [method smoothstep]。如果你需要执行更高级的过渡，请使用 [Tween] 或 "
+"另请参阅 [method smoothstep]。如果你需要执行更高级的过渡，请使用 [Tween] 或 "
 "[AnimationPlayer]。"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
@@ -1688,7 +1687,6 @@ msgstr ""
 "[/codeblock]"
 
 #: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
 msgid ""
 "Returns the result of smoothly interpolating the value of [code]s[/code] "
 "between [code]0[/code] and [code]1[/code], based on the where [code]s[/code] "
@@ -1731,7 +1729,7 @@ msgstr ""
 "与曲线值为 [code]-1.6521[/code] 的 [method ease] 相比，[method smoothstep] 返"
 "回最平滑的曲线，导数没有突然变化。如果你需要执行更高级的过渡，请使用 [Tween] "
 "或 [AnimationPlayer]。\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.4/img/"
+"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.5/img/"
 "smoothstep_ease_comparison.png]smoothstep() 与 ease(x, -1.6521) 返回值的比较"
 "[/url]"
 
@@ -4876,7 +4874,7 @@ msgstr ""
 "custom_action]信号。\n"
 "如果[code]right[/code]为 [code]true[/code]，按钮会被放置在所有同级按钮的右"
 "边。\n"
-"您可以使用 [method remove_button] 方法从对话框中删除使用此方法创建的按钮。"
+"您可以使用 [method remove_button] 方法从对话框中移除使用此方法创建的按钮。"
 
 #: doc/classes/AcceptDialog.xml
 msgid ""
@@ -4887,7 +4885,7 @@ msgid ""
 msgstr ""
 "向对话框中添加一个标签为[code]name[/code]和一个取消动作的按钮，然后返回这个新"
 "创建的按钮。\n"
-"您可以使用 [method remove_button] 方法从对话框中删除使用此方法创建的按钮。"
+"您可以使用 [method remove_button] 方法从对话框中移除使用此方法创建的按钮。"
 
 #: doc/classes/AcceptDialog.xml
 msgid ""
@@ -4897,7 +4895,7 @@ msgid ""
 "[member CanvasItem.visible] property."
 msgstr ""
 "返回内置文本所使用的标签。\n"
-"[b]警告：[/b]这是个必要的内部节点，删除和释放它有可能造成崩溃。如果你希望隐藏"
+"[b]警告：[/b]这是个必要的内部节点，移除并释放它有可能造成崩溃。如果你希望隐藏"
 "它或它的任意一个子节点，请使用它们的 [member CanvasItem.visible] 属性。"
 
 #: doc/classes/AcceptDialog.xml
@@ -4908,7 +4906,7 @@ msgid ""
 "[member CanvasItem.visible] property."
 msgstr ""
 "返回确定按钮 [Button] 实例。\n"
-"[b]警告：[/b]这是个必要的内部节点，删除和释放它有可能造成崩溃。如果你希望隐藏"
+"[b]警告：[/b]这是个必要的内部节点，移除并释放它有可能造成崩溃。如果你希望隐藏"
 "它或它的任意一个子节点，请使用它们的 [member CanvasItem.visible] 属性。"
 
 #: doc/classes/AcceptDialog.xml
@@ -5653,7 +5651,7 @@ msgstr "返回给定轨道中给定键的方法轨道上要调用的参数值。
 
 #: doc/classes/Animation.xml
 msgid "Removes a track by specifying the track index."
-msgstr "通过指定轨道索引来删除一个轨道。"
+msgstr "通过指定轨道索引来移除一个轨道。"
 
 #: doc/classes/Animation.xml
 msgid ""
@@ -5739,11 +5737,11 @@ msgstr "将轨道上移。"
 
 #: doc/classes/Animation.xml
 msgid "Removes a key by index in a given track."
-msgstr "在指定的轨道上按索引删除一个键。"
+msgstr "在指定的轨道上按索引移除一个键。"
 
 #: doc/classes/Animation.xml
 msgid "Removes a key by position (seconds) in a given track."
-msgstr "按位置（秒）删除指定轨道中的键。"
+msgstr "按位置（秒）移除指定轨道中的键。"
 
 #: doc/classes/Animation.xml
 msgid "Enables/disables the given track. Tracks are enabled by default."
@@ -6074,11 +6072,11 @@ msgstr ""
 
 #: doc/classes/AnimationNode.xml
 msgid "Removes an input, call this only when inactive."
-msgstr "删除输入，仅在处于非活动状态时调用此输入。"
+msgstr "移除输入，仅在处于非活动状态时调用此输入。"
 
 #: doc/classes/AnimationNode.xml
 msgid "Adds or removes a path for the filter."
-msgstr "添加或删除筛选器的路径。"
+msgstr "添加或移除筛选器的路径。"
 
 #: doc/classes/AnimationNode.xml
 msgid ""
@@ -6094,7 +6092,7 @@ msgstr "如果为 [code]true[/code]，则启用筛选功能。"
 
 #: doc/classes/AnimationNode.xml
 msgid "Emitted when the node was removed from the graph."
-msgstr "当该节点从图中删除时触发。"
+msgstr "当该节点从图中移除时触发。"
 
 #: doc/classes/AnimationNode.xml
 msgid ""
@@ -6317,7 +6315,7 @@ msgstr "返回索引 [code]point[/code] 处的点的位置。"
 
 #: doc/classes/AnimationNodeBlendSpace1D.xml
 msgid "Removes the point at index [code]point[/code] from the blend axis."
-msgstr "将索引 [code]point[/code] 处的点从混合轴上删除。"
+msgstr "将索引 [code]point[/code] 处的点从混合轴上移除。"
 
 #: doc/classes/AnimationNodeBlendSpace1D.xml
 #: doc/classes/AnimationNodeBlendSpace2D.xml
@@ -6424,12 +6422,12 @@ msgstr ""
 
 #: doc/classes/AnimationNodeBlendSpace2D.xml
 msgid "Removes the point at index [code]point[/code] from the blend space."
-msgstr "从混合空间中删除索引 [code]point[/code] 处的点。"
+msgstr "从混合空间中移除索引 [code]point[/code] 处的点。"
 
 #: doc/classes/AnimationNodeBlendSpace2D.xml
 msgid ""
 "Removes the triangle at index [code]triangle[/code] from the blend space."
-msgstr "从混合空间中删除索引 [code]triangle[/code] 处的三角形。"
+msgstr "从混合空间中移除索引 [code]triangle[/code] 处的三角形。"
 
 #: doc/classes/AnimationNodeBlendSpace2D.xml
 msgid ""
@@ -6475,7 +6473,7 @@ msgstr "混合空间 Y 轴的名称。"
 msgid ""
 "Emitted every time the blend space's triangles are created, removed, or when "
 "one of their vertices changes position."
-msgstr "每当创建、删除混合空间的三角形，或当其中一个顶点改变位置时发出。"
+msgstr "每当创建、移除混合空间的三角形，或当其中一个顶点改变位置时发出。"
 
 #: doc/classes/AnimationNodeBlendSpace2D.xml
 msgid "The interpolation between animations is linear."
@@ -6549,7 +6547,7 @@ msgstr "如果存在名称为 [code]name[/code] 的子节点，则返回 [code]t
 
 #: doc/classes/AnimationNodeBlendTree.xml
 msgid "Removes a sub-node."
-msgstr "删除一个子节点。"
+msgstr "移除一个子节点。"
 
 #: doc/classes/AnimationNodeBlendTree.xml
 msgid "Changes the name of a sub-node."
@@ -7879,9 +7877,9 @@ msgid ""
 "list is modified once during the physics step, not immediately after objects "
 "are moved. Consider using signals instead."
 msgstr ""
-"返回相交的[Area]的列表。重叠区域的[member CollisionObject.collision_layer]必"
-"须是这个区域[member CollisionObject.collision_mask]的一部分，这样才能被检测"
-"到。\n"
+"返回相交的 [Area] 的列表。重叠区域的 [member CollisionObject."
+"collision_layer] 必须是这个区域 [member CollisionObject.collision_mask] 的一"
+"部分，这样才能被检测到。\n"
 "出于性能的考虑，因碰撞都是同时处理的，这个列表在物理步骤中只修改一次，而不是"
 "在物体被移动后立即修改。考虑使用信号来代替。"
 
@@ -7894,9 +7892,9 @@ msgid ""
 "list is modified once during the physics step, not immediately after objects "
 "are moved. Consider using signals instead."
 msgstr ""
-"返回相交的[PhysicsBody]的列表。重叠物体的[member CollisionObject."
-"collision_layer]必须是这个区域[member CollisionObject.collision_mask]的一部"
-"分，这样才能被检测到。\n"
+"返回相交的 [PhysicsBody] 的列表。重叠物体的 [member CollisionObject."
+"collision_layer] 必须是这个区域 [member CollisionObject.collision_mask] 的一"
+"部分，这样才能被检测到。\n"
 "出于性能的考虑，因碰撞都是同时处理的，这个列表在物理步骤中只修改一次，而不是"
 "在物体被移动后立即修改。考虑使用信号来代替。"
 
@@ -7975,8 +7973,8 @@ msgid ""
 "The area's gravity vector (not normalized). If gravity is a point (see "
 "[member gravity_point]), this will be the point of attraction."
 msgstr ""
-"区域的未归一化的重力向量。如果重力作用在一个点上，则它将是引力点。请参阅 "
-"[member gravity_point]。"
+"区域的未归一化的重力向量。如果重力作用在一个点上，则它将是引力点（见 [member "
+"gravity_point]）。"
 
 #: doc/classes/Area.xml
 msgid ""
@@ -8882,7 +8880,7 @@ msgid ""
 "if the array is empty, without printing an error message. See also [method "
 "pop_front]."
 msgstr ""
-"删除并返回数组中的末尾元素。数组为空时，返回 [code]null[/code]。另请参阅 "
+"移除并返回数组中的末尾元素。数组为空时，返回 [code]null[/code]。另请参阅 "
 "[method pop_front]。"
 
 #: doc/classes/Array.xml
@@ -9142,11 +9140,11 @@ msgstr ""
 
 #: doc/classes/ArrayMesh.xml
 msgid "Removes all blend shapes from this [ArrayMesh]."
-msgstr "删除此[ArrayMesh]的所有混合形状。"
+msgstr "移除此 [ArrayMesh] 的所有混合形状。"
 
 #: doc/classes/ArrayMesh.xml
 msgid "Removes all surfaces from this [ArrayMesh]."
-msgstr "删除此[ArrayMesh]的所有表面。"
+msgstr "移除此 [ArrayMesh] 的所有表面。"
 
 #: doc/classes/ArrayMesh.xml
 msgid "Returns the number of blend shapes that the [ArrayMesh] holds."
@@ -9485,7 +9483,7 @@ msgstr ""
 "这是链接到控制器跟踪的辅助空间节点。它还为控制器上的按钮等状态提供了几个便捷"
 "的通道。\n"
 "控制器通过它们的 ID 链接。你可以在控制器可用之前创建控制器节点。如果你的游戏"
-"总是使用两个控制器，即每只手一个，你可以预先定义 ID 为 1 和 2 的控制器；一旦"
+"总是使用两个控制器（每只手一个），你可以预先定义 ID 为 1 和 2 的控制器；一旦"
 "确定了控制器，它们就会被激活。如果你希望使用额外的控制器，应该对信号加以处"
 "理，并将 ARVRController 节点添加到您场景中。\n"
 "控制器节点的位置由 [ARVRServer] 自动更新。这使得该节点非常适合添加子节点以实"
@@ -9615,8 +9613,8 @@ msgid ""
 "[ARVRServer]."
 msgstr ""
 "需要实现这个类才能使 AR 或 VR 平台可供 Godot 使用，并且应实现为 C++ 模块或 "
-"GDNative 模块，注意，对于 GDNative，应使用子类 ARVRScriptInterface。部分接口"
-"向 GDScript 公开，因而，您可以检测、启用和配置 AR 或 VR 平台。\n"
+"GDNative 模块（注意，对于 GDNative，应使用子类 ARVRScriptInterface）。部分接"
+"口向 GDScript 公开，因而，您可以检测、启用和配置 AR 或 VR 平台。\n"
 "接口应以这样的方式编写，只需启用它们就可以为我们提供工作配置。您可以通过 "
 "[ARVRServer] 查询可用接口。"
 
@@ -9637,7 +9635,7 @@ msgstr "返回 [enum Capabilities] 标签的组合，提供关于这个接口功
 
 #: doc/classes/ARVRInterface.xml
 msgid "Returns the name of this interface (OpenVR, OpenHMD, ARKit, etc)."
-msgstr "返回该接口的名称，如 OpenVR、OpenHMD、ARKit 等。"
+msgstr "返回该接口的名称（OpenVR、OpenHMD、ARKit 等）。"
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9713,7 +9711,7 @@ msgstr "没有 ARVR 功能。"
 #: doc/classes/ARVRInterface.xml
 msgid ""
 "This interface can work with normal rendering output (non-HMD based AR)."
-msgstr "此接口可以与正常的渲染输出一起工作，非基于 HMD 的 AR。"
+msgstr "此接口可以与正常的渲染输出一起工作（非基于 HMD 的 AR）。"
 
 #: doc/classes/ARVRInterface.xml
 msgid "This interface supports stereoscopic rendering."
@@ -9721,7 +9719,7 @@ msgstr "该接口支持立体渲染。"
 
 #: doc/classes/ARVRInterface.xml
 msgid "This interface supports AR (video background and real world tracking)."
-msgstr "该接口支持 AR，视频背景和真实世界跟踪。"
+msgstr "该接口支持 AR（视频背景和真实世界跟踪）。"
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9764,7 +9762,7 @@ msgstr "追踪行为符合预期。"
 msgid ""
 "Tracking is hindered by excessive motion (the player is moving faster than "
 "tracking can keep up)."
-msgstr "过度运动会阻碍追踪，即玩家的移动速度超过追踪的速度。"
+msgstr "过度运动会阻碍追踪（玩家的移动速度大于追踪的速度）。"
 
 #: doc/classes/ARVRInterface.xml
 msgid ""
@@ -9782,7 +9780,7 @@ msgstr "我们不知道跟踪的状态，或者这个接口未提供反馈。"
 msgid ""
 "Tracking is not functional (camera not plugged in or obscured, lighthouses "
 "turned off, etc.)."
-msgstr "追踪功能失效，即相机未插电或被遮挡，灯塔关闭，等等。"
+msgstr "追踪功能失效（相机未插电或被遮挡、灯塔关闭，等等）。"
 
 #: modules/gdnative/doc_classes/ARVRInterfaceGDNative.xml
 msgid "GDNative wrapper for an ARVR interface."
@@ -10097,7 +10095,7 @@ msgstr "添加新接口时触发。"
 
 #: doc/classes/ARVRServer.xml
 msgid "Emitted when an interface is removed."
-msgstr "当接口被删除时触发。"
+msgstr "当接口被移除时触发。"
 
 #: doc/classes/ARVRServer.xml
 msgid ""
@@ -10118,9 +10116,9 @@ msgid ""
 "available (i.e. a new controller is switched on that takes the place of the "
 "previous one)."
 msgstr ""
-"删除跟踪器时触发。如果适当，您应该删除所有 [ARVRController] 或 [ARVRAnchor] "
-"点。这不是强制性的，节点只是变为不活动状态，当新的跟踪器可用时将再次激活，即"
-"打开一个新的控制器来代替前一个控制器。"
+"移除跟踪器时触发。如果适当，您应该删除所有 [ARVRController] 或 [ARVRAnchor] "
+"点。这不是强制性的，节点只是变为不活动状态，当新的跟踪器可用时将再次激活（即"
+"打开一个新的控制器来代替前一个控制器）。"
 
 #: doc/classes/ARVRServer.xml
 msgid "The tracker tracks the location of a controller."
@@ -10248,7 +10246,7 @@ msgstr ""
 #: doc/classes/AspectRatioContainer.xml
 msgid ""
 "Aligns child controls with the beginning (left or top) of the container."
-msgstr "将子控件与容器的开头对齐，左侧或顶部。"
+msgstr "将子控件与容器的开头对齐（左侧或顶部）。"
 
 #: doc/classes/AspectRatioContainer.xml
 msgid "Aligns child controls with the center of the container."
@@ -10256,7 +10254,7 @@ msgstr "使子控件与容器的中心对齐。"
 
 #: doc/classes/AspectRatioContainer.xml
 msgid "Aligns child controls with the end (right or bottom) of the container."
-msgstr "将子控件与容器的末端对齐，右侧或底部。"
+msgstr "将子控件与容器的末端对齐（右侧或底部）。"
 
 #: doc/classes/AStar.xml
 msgid ""
@@ -10603,7 +10601,7 @@ msgstr "返回是否禁用点以进行寻路。默认情况下，所有点均处
 msgid ""
 "Removes the point associated with the given [code]id[/code] from the points "
 "pool."
-msgstr "从点池中删除与给定 [code]id[/code] 关联的点。"
+msgstr "从点池中移除与给定 [code]id[/code] 关联的点。"
 
 #: doc/classes/AStar.xml doc/classes/AStar2D.xml
 msgid ""
@@ -11765,7 +11763,7 @@ msgid ""
 "If [code]true[/code], the sound will be recorded. Note that restarting the "
 "recording will remove the previously recorded sample."
 msgstr ""
-"如果为 [code]true[/code]，将录制声音。请注意，重新开始录音将删除先前录音的样"
+"如果为 [code]true[/code]，将录制声音。请注意，重新开始录音将移除先前录音的样"
 "本。"
 
 #: doc/classes/AudioEffectRecord.xml
@@ -12058,7 +12056,7 @@ msgid ""
 "Removes the effect at index [code]effect_idx[/code] from the bus at index "
 "[code]bus_idx[/code]."
 msgstr ""
-"将索引 [code]effect_idx[/code] 的效果从索引 [code]bus_idx[/code] 的总线上删"
+"将索引 [code]effect_idx[/code] 的效果从索引 [code]bus_idx[/code] 的总线上移"
 "除。"
 
 #: doc/classes/AudioServer.xml
@@ -12374,8 +12372,14 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr "如果为 [code]true[/code]，在添加到场景树时将播放音频。"
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
-msgstr "播放此音频的总线。"
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
+msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
 msgid ""
@@ -12568,8 +12572,14 @@ msgstr ""
 "频。"
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
-msgstr "播放此音频的总线。"
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
+msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
 msgid ""
@@ -13324,7 +13334,7 @@ msgid ""
 "will be removed in Godot 4.0. This property no longer has any effect when "
 "set. Please use [member Control.focus_mode] instead."
 msgstr ""
-"[i]已弃用。[/i]由于冗余，此属性已弃用，将在 Godot 4.0 中删除。此属性在设置后"
+"[i]已弃用。[/i]由于冗余，此属性已弃用，将在 Godot 4.0 中移除。此属性在设置后"
 "不会有任何影响。请改用 [member Control.focus_mode]。"
 
 #: doc/classes/BaseButton.xml
@@ -13460,7 +13470,7 @@ msgstr ""
 "用于 3D 旋转和缩放的 3×3 矩阵。几乎总是用作变换的正交基。\n"
 "包含 3 个向量字段 X、Y 和 Z 作为其列，通常被解释为变换的局部基向量。对于这种"
 "用途，它依次由一个缩放矩阵和一个旋转矩阵组成（M=R.S）。\n"
-"也可以作为三维向量的数组来访问。这些向量通常是相互正交的，但不一定是归一化的"
+"也可以作为 3D 向量的数组来访问。这些向量通常是相互正交的，但不一定是归一化的"
 "（由于缩放）。\n"
 "更多信息请阅读文档中的《矩阵和变换》一文。"
 
@@ -14397,9 +14407,9 @@ msgid ""
 "to the position and orientation of the camera by subclassed cameras such as "
 "[ClippedCamera], [InterpolatedCamera] and [ARVRCamera]."
 msgstr ""
-"返回相机的变换加上垂直[member v_offset]和水平[member h_offset]的偏移量；以及"
-"由子类相机如[ClippedCamera]、[InterpolatedCamera]和[ARVRCamera]对相机的位置和"
-"方向做出的任何其他调整。"
+"返回相机的变换加上垂直 [member v_offset] 和水平 [member h_offset] 的偏移量；"
+"以及由子类相机如 [ClippedCamera]、[InterpolatedCamera] 和 [ARVRCamera] 对相机"
+"的位置和方向做出的任何其他调整。"
 
 #: doc/classes/Camera.xml
 msgid ""
@@ -14510,8 +14520,8 @@ msgid ""
 "angle in degrees, and the [code]z_near[/code] and [code]z_far[/code] clip "
 "planes in world space units."
 msgstr ""
-"将摄像机的投影设置为透视模式，参阅[constant PROJECTION_PERSPECTIVE]），指定"
-"[code]fov[/code] 视野角度，单位度，以及世界空间单位的[code]z_near[/code]和"
+"将摄像机的投影设置为透视模式（见 [constant PROJECTION_PERSPECTIVE]），指定 "
+"[code]fov[/code] 视野角度，单位为度，以及世界空间单位的[code]z_near[/code]和"
 "[code]z_far[/code]裁剪平面。"
 
 #: doc/classes/Camera.xml
@@ -14772,7 +14782,7 @@ msgstr "将相机与跟踪的节点对齐。"
 msgid ""
 "Removes any [Camera2D] from the ancestor [Viewport]'s internal currently-"
 "assigned camera."
-msgstr "从父级[Viewport]的内部当前分配的相机中删除任何[Camera2D]。"
+msgstr "从父级 [Viewport] 的内部当前分配的相机中移除任何 [Camera2D]。"
 
 #: doc/classes/Camera2D.xml
 msgid "Forces the camera to update scroll immediately."
@@ -16737,7 +16747,7 @@ msgstr "添加碰撞例外，以使相机不会与指定的[RID]碰撞。"
 
 #: doc/classes/ClippedCamera.xml
 msgid "Removes all collision exceptions."
-msgstr "删除所有碰撞例外。"
+msgstr "移除所有碰撞例外。"
 
 #: doc/classes/ClippedCamera.xml
 msgid "Returns the distance the camera has been offset due to a collision."
@@ -16753,11 +16763,11 @@ msgstr ""
 
 #: doc/classes/ClippedCamera.xml
 msgid "Removes a collision exception with the specified node."
-msgstr "删除与指定节点的碰撞例外。"
+msgstr "移除与指定节点的碰撞例外。"
 
 #: doc/classes/ClippedCamera.xml
 msgid "Removes a collision exception with the specified [RID]."
-msgstr "删除指定 [RID] 的碰撞例外。"
+msgstr "移除指定 [RID] 的碰撞例外。"
 
 #: doc/classes/ClippedCamera.xml
 msgid ""
@@ -16924,11 +16934,11 @@ msgstr "返回具有给定形状所有者的给定 id 的形状 [Shape] 的子�
 
 #: doc/classes/CollisionObject.xml
 msgid "Returns the shape owner's [Transform]."
-msgstr "返回形状所有者的[Transform]。"
+msgstr "返回形状所有者的 [Transform]。"
 
 #: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
 msgid "Removes a shape from the given shape owner."
-msgstr "从给定的形状所有者中删除一个形状。"
+msgstr "从给定的形状所有者中移除一个形状。"
 
 #: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
 msgid "If [code]true[/code], disables the given shape owner."
@@ -16936,7 +16946,7 @@ msgstr "如果为 [code]true[/code]，则禁用给定的形状所有者。"
 
 #: doc/classes/CollisionObject.xml
 msgid "Sets the [Transform] of the given shape owner."
-msgstr "设置给定形状所有者的[Transform]。"
+msgstr "设置给定形状所有者的 [Transform]。"
 
 #: doc/classes/CollisionObject.xml
 msgid ""
@@ -17009,7 +17019,7 @@ msgstr "当鼠标指针退出此对象的所有形状时发出。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid "Base node for 2D collision objects."
-msgstr "二维碰撞对象的基础节点。"
+msgstr "2D 碰撞对象的基础节点。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid ""
@@ -17045,7 +17055,7 @@ msgid ""
 "Returns the [code]one_way_collision_margin[/code] of the shape owner "
 "identified by given [code]owner_id[/code]."
 msgstr ""
-"返回由给定的[code]owner_id[/code]标识的形状所有者的"
+"返回由给定的 [code]owner_id[/code] 标识的形状所有者的 "
 "[code]one_way_collision_margin[/code]。"
 
 #: doc/classes/CollisionObject2D.xml
@@ -17054,26 +17064,26 @@ msgid ""
 "this [CollisionObject2D] will not be reported to collided with "
 "[CollisionObject2D]s."
 msgstr ""
-"返回 [code]true[/code]，如果源于这个[CollisionObject2D]的形状所有者的碰撞不会"
-"被报告给[CollisionObject2D]s。"
+"返回 [code]true[/code]，如果源于这个 [CollisionObject2D] 的形状所有者的碰撞不"
+"会被报告给 [CollisionObject2D]。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid "Adds a [Shape2D] to the shape owner."
-msgstr "给形状所有者添加一个[Shape2D]。"
+msgstr "给形状所有者添加一个 [Shape2D]。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid "Returns the [Shape2D] with the given id from the given shape owner."
-msgstr "从给定的形状所有者那里返回给定id的[Shape2D]。"
+msgstr "从给定的形状所有者那里返回给定 id 的 [Shape2D]。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid ""
 "Returns the child index of the [Shape2D] with the given id from the given "
 "shape owner."
-msgstr "从给定的形状所有者那里返回给定id的[Shape2D]的子索引。"
+msgstr "从给定的形状所有者那里返回给定 id 的 [Shape2D] 的子索引。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid "Returns the shape owner's [Transform2D]."
-msgstr "返回形状所有者的[Transform2D]。"
+msgstr "返回形状所有者的 [Transform2D]。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid ""
@@ -17081,20 +17091,20 @@ msgid ""
 "originating from this [CollisionObject2D] will not be reported to collided "
 "with [CollisionObject2D]s."
 msgstr ""
-"如果[code]enable[/code]为 [code]true[/code]，则源自这个[CollisionObject2D]的"
-"形状所有者的碰撞将不会被报告给[CollisionObject2D]。"
+"如果 [code]enable[/code] 为 [code]true[/code]，则源自这个 "
+"[CollisionObject2D] 的形状所有者的碰撞将不会被报告给 [CollisionObject2D]。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid ""
 "Sets the [code]one_way_collision_margin[/code] of the shape owner identified "
 "by given [code]owner_id[/code] to [code]margin[/code] pixels."
 msgstr ""
-"将由给定的[code]owner_id[/code]标识的形状所有者的"
-"[code]one_way_collision_margin[/code]设置为[code]margin[/code]像素。"
+"将由给定的 [code]owner_id[/code] 标识的形状所有者的 "
+"[code]one_way_collision_margin[/code] 设置为 [code]margin[/code] 像素。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid "Sets the [Transform2D] of the given shape owner."
-msgstr "设置给定形状所有者的[Transform2D]。"
+msgstr "设置给定形状所有者的 [Transform2D]。"
 
 #: doc/classes/CollisionObject2D.xml
 msgid ""
@@ -18391,7 +18401,7 @@ msgstr ""
 #: doc/classes/ColorPicker.xml
 msgid ""
 "Removes the given color from the list of color presets of this color picker."
-msgstr "从这个取色器的颜色预设列表中删除给定的颜色。"
+msgstr "从这个取色器的颜色预设列表中移除给定的颜色。"
 
 #: doc/classes/ColorPicker.xml
 msgid "Returns the list of colors in the presets of the color picker."
@@ -18452,7 +18462,7 @@ msgstr "添加预设时发出。"
 
 #: doc/classes/ColorPicker.xml
 msgid "Emitted when a preset is removed."
-msgstr "删除预设时发出。"
+msgstr "移除预设时发出。"
 
 #: doc/classes/ColorPicker.xml
 msgid "The width of the hue selection slider."
@@ -18530,7 +18540,7 @@ msgid ""
 msgstr ""
 "返回控件的 [PopupPanel]，它允许你连接到弹出信号。这允许你在显示或隐藏 "
 "ColorPicker 时事件处理。\n"
-"[b]警告：[/b]这是一个必需的内部节点，删除和释放它可能会导致崩溃。如果你希望隐"
+"[b]警告：[/b]这是一个必需的内部节点，移除并释放它可能会导致崩溃。如果你希望隐"
 "藏它或其任何子项，请使用其 [member CanvasItem.visible] 属性。"
 
 #: doc/classes/ColorPickerButton.xml
@@ -18891,7 +18901,7 @@ msgstr ""
 
 #: doc/classes/ConfigFile.xml
 msgid "Removes the entire contents of the config."
-msgstr "删除配置的全部内容。"
+msgstr "移除配置的全部内容。"
 
 #: doc/classes/ConfigFile.xml
 msgid ""
@@ -19019,7 +19029,7 @@ msgid ""
 "if it ends up empty once the key has been removed."
 msgstr ""
 "为指定章节的指定键赋值。如果节或键不存在，则创建它们。如果指定的键存在，传递 "
-"[code]null[/code] 值就会删除指定的键，如果键被删除后，键最终是空的，就会删除"
+"[code]null[/code] 值就会移除指定的键，如果键被移除后，键最终是空的，就会移除"
 "节。"
 
 #: doc/classes/ConfirmationDialog.xml
@@ -19051,7 +19061,7 @@ msgid ""
 "[member CanvasItem.visible] property."
 msgstr ""
 "返回取消按钮。\n"
-"[b]警告：[/b]这是一个必需的内部节点，删除和释放它可能会导致崩溃。如果你希望隐"
+"[b]警告：[/b]这是一个必需的内部节点，移除并释放它可能会导致崩溃。如果你希望隐"
 "藏它或其任何子项，请使用其 [member CanvasItem.visible] 属性。"
 
 #: doc/classes/Container.xml
@@ -21232,7 +21242,7 @@ msgid ""
 "points] property using the convex hull algorithm. Removing all unneeded "
 "points. See [method Geometry.convex_hull_2d] for details."
 msgstr ""
-"基于所提供点的集合，使用凸包算法创建和分配 [member points]属性。删除所有不需"
+"基于所提供点的集合，使用凸包算法创建和分配 [member points]属性。移除所有不需"
 "要的点。详情请参阅 [method Geometry.convex_hull_2d]。"
 
 #: doc/classes/ConvexPolygonShape2D.xml
@@ -21400,8 +21410,8 @@ msgid ""
 "Each particle's color will vary along this [GradientTexture] over its "
 "lifetime (multiplied with [member color])."
 msgstr ""
-"每个粒子的颜色将在其生命周期内随着这个[GradientTexture]变化，即与[member "
-"color]相乘。"
+"每个粒子的颜色将在其生命周期内随着这个 [GradientTexture] 变化（与 [member "
+"color] 相乘）。"
 
 #: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
 #: doc/classes/ParticlesMaterial.xml
@@ -22468,8 +22478,8 @@ msgid ""
 "V around the outline of the [member polygon]), the bottom-left quarter to "
 "the front end face, and the bottom-right quarter to the back end face."
 msgstr ""
-"用于生成的网格的材质。UV 将材质的上半部分映射到挤出的形状，即U沿挤出物的长"
-"度，V 围绕 [member polygon]的轮廓，左下角的四分之一映射到前端面，右下角的四分"
+"用于生成的网格的材质。UV 将材质的上半部分映射到挤出的形状（U 沿挤出物的长度，"
+"V 围绕 [member polygon] 的轮廓），左下角的四分之一映射到前端面，右下角的四分"
 "之一映射到后端面。"
 
 #: modules/csg/doc_classes/CSGPolygon.xml
@@ -22792,11 +22802,11 @@ msgstr ""
 #: modules/csg/doc_classes/CSGShape.xml
 msgid ""
 "Geometry of both primitives is merged, intersecting geometry is removed."
-msgstr "合并两个图元的几何体，删除相交的几何体。"
+msgstr "合并两个图元的几何体，移除相交的几何体。"
 
 #: modules/csg/doc_classes/CSGShape.xml
 msgid "Only intersecting geometry remains, the rest is removed."
-msgstr "仅保留相交的几何，其余的将被删除。"
+msgstr "仅保留相交的几何，其余的将被移除。"
 
 #: modules/csg/doc_classes/CSGShape.xml
 msgid ""
@@ -23231,11 +23241,11 @@ msgstr "重新计算曲线的烘焙点缓存。"
 msgid ""
 "Removes points that are closer than [code]CMP_EPSILON[/code] (0.00001) units "
 "to their neighbor on the curve."
-msgstr "删除比曲线上的相邻点近[code]CMP_EPSILON[/code]（0.00001）个单位的点。"
+msgstr "移除比曲线上的相邻点近[code]CMP_EPSILON[/code]（0.00001）个单位的点。"
 
 #: doc/classes/Curve.xml doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid "Removes all points from the curve."
-msgstr "从曲线中删除所有点。"
+msgstr "从曲线中移除所有点。"
 
 #: doc/classes/Curve.xml doc/classes/Curve2D.xml doc/classes/Curve3D.xml
 msgid "Returns the number of points describing the curve."
@@ -23284,7 +23294,7 @@ msgstr ""
 
 #: doc/classes/Curve.xml
 msgid "Removes the point at [code]index[/code] from the curve."
-msgstr "从曲线中删除 [code]index[/code] 处的点。"
+msgstr "从曲线中移除 [code]index[/code] 处的点。"
 
 #: doc/classes/Curve.xml
 msgid ""
@@ -23569,7 +23579,7 @@ msgstr ""
 
 #: doc/classes/Curve3D.xml
 msgid "Describes a Bézier curve in 3D space."
-msgstr "描述二维空间的贝兹尔曲线。"
+msgstr "描述 3D 空间的贝兹尔曲线。"
 
 #: doc/classes/Curve3D.xml
 msgid ""
@@ -24099,7 +24109,7 @@ msgstr "GDScript 基础：字典"
 
 #: doc/classes/Dictionary.xml
 msgid "Clear the dictionary, removing all key/value pairs."
-msgstr "清除字典，删除所有键/值对。"
+msgstr "清除字典，移除所有键/值对。"
 
 #: doc/classes/Dictionary.xml
 msgid ""
@@ -24232,7 +24242,6 @@ msgstr ""
 "换的世界空间坐标（原点）会被忽略。只会用基来确定光线的方向。"
 
 #: doc/classes/DirectionalLight.xml
-#, fuzzy
 msgid ""
 "Amount of extra bias for shadow splits that are far away. If self-shadowing "
 "occurs only on the splits far away, increasing this value can fix them. This "
@@ -24240,7 +24249,8 @@ msgid ""
 "SHADOW_ORTHOGONAL]."
 msgstr ""
 "远处阴影分裂的额外偏置量。如果自身阴影只产生远处的分裂，增加这个值可以修复它"
-"们。"
+"们。当 [member directional_shadow_mode] 为 [constant SHADOW_ORTHOGONAL] 时会"
+"被忽略。"
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -24249,6 +24259,9 @@ msgid ""
 "moderate performance cost. This is ignored when [member "
 "directional_shadow_mode] is [constant SHADOW_ORTHOGONAL]."
 msgstr ""
+"如果为 [code]true[/code]，会牺牲阴影的细节，换取分割区域之间更平滑的过渡。启"
+"用阴影混合分割同时也会带来一些性能消耗。当 [member directional_shadow_mode] "
+"为 [constant SHADOW_ORTHOGONAL] 时会被忽略。"
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -24263,6 +24276,8 @@ msgid ""
 "shadow detail and performance (since more objects need to be included in the "
 "directional shadow rendering)."
 msgstr ""
+"阴影分割的最大距离。将这个值增大会让方向阴影在更远处可见，代价是整体的阴影细"
+"节降低和性能（因为渲染方向阴影时需要包含更多的对象）。"
 
 #: doc/classes/DirectionalLight.xml
 msgid "The light's shadow rendering algorithm. See [enum ShadowMode]."
@@ -24275,39 +24290,36 @@ msgid ""
 msgstr "当物体垂直于光线时，可用于修复自身阴影的特殊情况。"
 
 #: doc/classes/DirectionalLight.xml
-#, fuzzy
 msgid ""
 "The distance from camera to shadow split 1. Relative to [member "
 "directional_shadow_max_distance]. Only used when [member "
 "directional_shadow_mode] is [constant SHADOW_PARALLEL_2_SPLITS] or [constant "
 "SHADOW_PARALLEL_4_SPLITS]."
 msgstr ""
-"相机到影子分割1的距离。相对于[member directional_shadow_max_distance]。只有当"
-"[member directional_shadow_mode]是[code]SHADOW_PARALLEL_2_SPLITS[/code]或"
-"[code]SHADOW_PARALLEL_4_SPLITS[/code]时才使用。"
+"相机到阴影分割 1 的距离。相对于 [member directional_shadow_max_distance]。只"
+"有当 [member directional_shadow_mode] 为 [constant SHADOW_PARALLEL_2_SPLITS] "
+"或 [constant SHADOW_PARALLEL_4_SPLITS] 时才使用。"
 
 #: doc/classes/DirectionalLight.xml
-#, fuzzy
 msgid ""
 "The distance from shadow split 1 to split 2. Relative to [member "
 "directional_shadow_max_distance]. Only used when [member "
 "directional_shadow_mode] is [constant SHADOW_PARALLEL_2_SPLITS] or [constant "
 "SHADOW_PARALLEL_4_SPLITS]."
 msgstr ""
-"阴影分割1到分割2的距离。相对于[member directional_shadow_max_distance]。仅在"
-"[member directional_shadow_mode]为[code]SHADOW_PARALLEL_2_SPLITS[/code]或"
-"[code]SHADOW_PARALLEL_4_SPLITS[/code]时使用。"
+"阴影分割 1 到分割 2 的距离。相对于 [member directional_shadow_max_distance]。"
+"仅在 [member directional_shadow_mode] 为 [constant SHADOW_PARALLEL_2_SPLITS] "
+"或 [constant SHADOW_PARALLEL_4_SPLITS] 时使用。"
 
 #: doc/classes/DirectionalLight.xml
-#, fuzzy
 msgid ""
 "The distance from shadow split 2 to split 3. Relative to [member "
 "directional_shadow_max_distance]. Only used when [member "
 "directional_shadow_mode] is [constant SHADOW_PARALLEL_4_SPLITS]."
 msgstr ""
-"从影子分割2到分割3的距离。相对于[member directional_shadow_max_distance]。只"
-"有当[member directional_shadow_mode]为[code]SHADOW_PARALLEL_4_SPLITS[/code]时"
-"才使用。"
+"从阴影分割 2 到分割 3 的距离。相对于 [member "
+"directional_shadow_max_distance]。只有当 [member directional_shadow_mode] 为 "
+"[constant SHADOW_PARALLEL_4_SPLITS] 时才使用。"
 
 #: doc/classes/DirectionalLight.xml
 msgid ""
@@ -24547,8 +24559,8 @@ msgid ""
 "Closes the current stream opened with [method list_dir_begin] (whether it "
 "has been fully processed with [method get_next] does not matter)."
 msgstr ""
-"关闭用 [method list_dir_begin] 打开的当前流，并不关注是否已经用 [method "
-"get_next] 完成处理。"
+"关闭用 [method list_dir_begin] 打开的当前流（并不关注是否已经用 [method "
+"get_next] 完成处理）。"
 
 #: doc/classes/Directory.xml
 msgid ""
@@ -24762,8 +24774,8 @@ msgid ""
 "[constant PacketPeerDTLS.STATUS_HANDSHAKING], as it is normal that 50% of "
 "the new connections will be invalid due to cookie exchange."
 msgstr ""
-"尝试与给定的 [code]udp_peer[/code] 启动 DTLS 握手，该 peer 必须已经连接，请参"
-"阅 [method PacketPeerUDP.connect_to_host]。\n"
+"尝试与给定的 [code]udp_peer[/code] 启动 DTLS 握手，该 peer 必须已经连接（见 "
+"[method PacketPeerUDP.connect_to_host]）。\n"
 "[b]注意：[/b]你必须检查返回 PacketPeerUDP 的状态是否为 [constant "
 "PacketPeerDTLS.STATUS_HANDSHAKING]，因为正常情况下，50% 的新连接会因为 "
 "cookie 交换而无效。"
@@ -25334,7 +25346,7 @@ msgstr ""
 
 #: doc/classes/EditorFileDialog.xml
 msgid "Removes all filters except for \"All Files (*)\"."
-msgstr "删除除“All Files(*)”筛选器之外的所有筛选器。"
+msgstr "移除“All Files(*)”筛选器之外的所有筛选器。"
 
 #: doc/classes/EditorFileDialog.xml
 msgid ""
@@ -25948,7 +25960,7 @@ msgstr ""
 msgid ""
 "Emitted when the Edit button of an [Object] has been pressed in the "
 "inspector. This is mainly used in the remote scene tree inspector."
-msgstr "在检查器中按下[Object]的编辑按钮时触发。主要用于远程场景树检查器中。"
+msgstr "在检查器中按下 [Object] 的编辑按钮时触发。主要用于远程场景树检查器中。"
 
 #: doc/classes/EditorInspector.xml
 msgid "Emitted when a property is edited in the inspector."
@@ -25960,8 +25972,8 @@ msgid ""
 "by clicking the \"key\" icon next to a property when the Animation panel is "
 "toggled."
 msgstr ""
-"当属性在检查器中被键入时触发。当切换动画面板时，可通过点击属性旁边的 \"键 "
-"\"图标对属性进行键控。"
+"当属性在检查器中被键入时触发。当动画面板打开时，可通过点击属性旁边的“钥匙”图"
+"标为属性添加关键帧。"
 
 #: doc/classes/EditorInspector.xml
 msgid "Emitted when a property is selected in the inspector."
@@ -26069,7 +26081,7 @@ msgid ""
 "built-in editor for this property, otherwise allows to insert a custom "
 "editor before the built-in one."
 msgstr ""
-"允许被调用在检查器中添加特定属性的编辑器。通常这些编辑器继承"
+"允许被调用在检查器中添加特定属性的编辑器。通常这些编辑器继承 "
 "[EditorProperty]。返回 [code]true[/code]删除该属性的内置编辑器，否则允许在内"
 "置编辑器之前插入一个自定义编辑器。"
 
@@ -26147,8 +26159,8 @@ msgid ""
 "code] and [code]interface/editor/custom_display_scale[/code] editor "
 "settings. Editor must be restarted for changes to be properly applied."
 msgstr ""
-"返回编辑器用户 UI 的实际比例，[code]1.0[/code] 比例为 100%。这可以用来调整由"
-"插件添加的用户 UI 的位置和尺寸。\n"
+"返回编辑器用户 UI 的实际比例（[code]1.0[/code] 表示比例为 100%）。这可以用来"
+"调整由插件添加的用户 UI 的位置和尺寸。\n"
 "[b]注意：[/b]这个值是通过 [code]interface/editor/display_scale[/code] 和 "
 "[code]interface/editor/custom_display_scale[/code] 编辑器设置项来设置。编辑器"
 "必须重新启动才能正确应用这些变化。"
@@ -29114,7 +29126,7 @@ msgid ""
 "The global color saturation value of the rendered scene (default value is "
 "1). Effective only if [code]adjustment_enabled[/code] is [code]true[/code]."
 msgstr ""
-"渲染场景的全局色彩饱和度值，默认值为1。只有在 [code]adjustment_enabled[/"
+"渲染场景的全局色彩饱和度值（默认值为 1）。只有在 [code]adjustment_enabled[/"
 "code] 为 [code]true[/code] 时才有效。"
 
 #: doc/classes/Environment.xml
@@ -29557,7 +29569,7 @@ msgid ""
 "The screen-space ambient occlusion bias. This should be kept high enough to "
 "prevent \"smooth\" curves from being affected by ambient occlusion."
 msgstr ""
-"屏幕空间环境光遮蔽偏差。该值应保持在足够高的水平，以防止“平滑”曲线受到环境光"
+"屏幕空间环境光遮蔽偏置。该值应保持在足够高的水平，以防止“平滑”曲线受到环境光"
 "遮蔽的影响。"
 
 #: doc/classes/Environment.xml
@@ -29593,13 +29605,13 @@ msgstr ""
 msgid ""
 "The primary screen-space ambient occlusion intensity. See also [member "
 "ssao_radius]."
-msgstr "主要的屏幕空间环境光遮蔽强度。参阅[member ssao_radius]。"
+msgstr "主屏幕的空间环境光遮蔽强度。另请参阅 [member ssao_radius]。"
 
 #: doc/classes/Environment.xml
 msgid ""
 "The secondary screen-space ambient occlusion intensity. See also [member "
 "ssao_radius2]."
-msgstr "主要的屏幕空间环境光遮蔽强度。参阅 [member ssao_radius]。"
+msgstr "次屏幕的空间环境光遮蔽强度。另请参阅 [member ssao_radius2]。"
 
 #: doc/classes/Environment.xml
 msgid ""
@@ -31817,9 +31829,9 @@ msgid ""
 "inside the segment ([code]s1[/code], [code]s2[/code]) or outside of it, i.e. "
 "somewhere on the line extending from the segment."
 msgstr ""
-"返回由（[code]s1[/code], [code]s2[/code]）定义的二维线上最接近[code]point[/"
-"code]的二维点。返回的点可以在线段（[code]s1[/code], [code]s2[/code]）内，也可"
-"以在线段外，即在从线段延伸出来的某处。"
+"返回由 ([code]s1[/code], [code]s2[/code]) 定义的 2D 线上最接近 [code]point[/"
+"code] 的 2D 点。返回的点可以在线段 ([code]s1[/code], [code]s2[/code]) 内，也"
+"可以在线段外，即在从线段延伸出来的某处。"
 
 #: doc/classes/Geometry.xml
 msgid ""
@@ -35506,7 +35518,6 @@ msgid "A node with the ability to send HTTP(S) requests."
 msgstr "具有发送 HTTP(S) 请求能力的节点。"
 
 #: doc/classes/HTTPRequest.xml
-#, fuzzy
 msgid ""
 "A node with the ability to send HTTP requests. Uses [HTTPClient] "
 "internally.\n"
@@ -35601,7 +35612,7 @@ msgstr ""
 "    # 执行 POST 请求。截止到文档编写时，下面的 URL 会返回 JSON。\n"
 "    # 注意：请勿使用单个 HTTPRequest 节点进行连续请求。\n"
 "    # 下面的代码段仅供参考。\n"
-"    var body = {\"name\": \"Godette\"}\n"
+"    var body = to_json({\"name\": \"Godette\"})\n"
 "    error = http_request.request(\"https://httpbin.org/post\", [], true, "
 "HTTPClient.METHOD_POST, body)\n"
 "    if error != OK:\n"
@@ -35773,14 +35784,16 @@ msgid ""
 msgstr "允许的最大重定向数。用于防止无限重定向循环。"
 
 #: doc/classes/HTTPRequest.xml
+#, fuzzy
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 "如果设为大于 [code]0.0[/code] 的值，在经过 [code]timeout[/code] 秒仍未[i]完成"
 "[/i]请求时，该 HTTP 请求就会超时。对于 REST API 等较小的 HTTP 请求，将 "
@@ -36013,7 +36026,7 @@ msgstr ""
 msgid ""
 "Stretches the image and enlarges it by a factor of 2. No interpolation is "
 "done."
-msgstr "拉伸图像并将其放大2倍，不进行插值。"
+msgstr "拉伸图像并将其放大 2 倍，不进行插值。"
 
 #: doc/classes/Image.xml
 msgid "Fills the image with [code]color[/code]."
@@ -36053,7 +36066,7 @@ msgstr ""
 "错误。\n"
 "[b]注意：[/b]多级渐远纹理的生成是在 CPU 上完成的，是单线程的，并且[i]总是[/i]"
 "在主线程上完成。这意味着在游戏过程中生成多级渐远纹理会导致明显的卡顿，即使从 "
-"[Thread] 调用[method generate_mipmaps]。"
+"[Thread] 调用 [method generate_mipmaps]。"
 
 #: doc/classes/Image.xml
 msgid "Returns a copy of the image's raw data."
@@ -36303,7 +36316,7 @@ msgstr ""
 
 #: doc/classes/Image.xml
 msgid "Shrinks the image by a factor of 2."
-msgstr "将图像缩小2倍。"
+msgstr "将图像缩小 2 倍。"
 
 #: doc/classes/Image.xml
 msgid "Converts the raw data from the sRGB colorspace to a linear scale."
@@ -36329,7 +36342,7 @@ msgstr "[Image] 资源允许的最大高度。"
 
 #: doc/classes/Image.xml
 msgid "Texture format with a single 8-bit depth representing luminance."
-msgstr "纹理格式，具有代表亮度的单一8位深度。"
+msgstr "纹理格式，具有代表亮度的单一 8 位深度。"
 
 #: doc/classes/Image.xml
 msgid ""
@@ -36407,16 +36420,16 @@ msgid ""
 "OpenGL texture format [code]GL_RGB32F[/code] where there are three "
 "components, each a 32-bit floating-point values."
 msgstr ""
-"OpenGL纹理格式[code]GL_RGB32F[/code]，其中有三个部分，每个部分都是32位浮点"
-"值。"
+"OpenGL 纹理格式 [code]GL_RGB32F[/code]，其中有三个部分，每个部分都是 32 位浮"
+"点值。"
 
 #: doc/classes/Image.xml
 msgid ""
 "OpenGL texture format [code]GL_RGBA32F[/code] where there are four "
 "components, each a 32-bit floating-point values."
 msgstr ""
-"OpenGL纹理格式[code]GL_RGBA32F[/code]，其中有四个部分，每个部分都是32位浮点"
-"值。"
+"OpenGL 纹理格式 [code]GL_RGBA32F[/code]，其中有四个部分，每个部分都是 32 位浮"
+"点值。"
 
 #: doc/classes/Image.xml
 msgid ""
@@ -36704,7 +36717,7 @@ msgstr "表示 [enum Format] 枚举的大小。"
 msgid ""
 "Performs nearest-neighbor interpolation. If the image is resized, it will be "
 "pixelated."
-msgstr "执行最近邻插值.如果调整图像大小,它将被像素化."
+msgstr "执行最近邻插值。如果调整图像大小，它将被像素化。"
 
 #: doc/classes/Image.xml
 msgid ""
@@ -36721,8 +36734,8 @@ msgid ""
 "This mode often gives better results compared to [constant "
 "INTERPOLATE_BILINEAR], at the cost of being slower."
 msgstr ""
-"执行三次插值.如果调整图像大小,则图像将模糊.与[constant INTERPOLATE_BILINEAR]"
-"相比,此模式通常会产生更好的结果,但代价是速度较慢."
+"执行三次插值。如果调整图像大小，则图像将模糊。与 [constant "
+"INTERPOLATE_BILINEAR] 相比，此模式通常会产生更好的结果，但代价是速度较慢。"
 
 #: doc/classes/Image.xml
 msgid ""
@@ -36754,36 +36767,36 @@ msgid ""
 "Performs Lanczos interpolation. This is the slowest image resizing mode, but "
 "it typically gives the best results, especially when downscalng images."
 msgstr ""
-"执行Lanczos插值.这是最慢的图像调整大小模式,但通常可以提供最佳效果,尤其是在缩"
-"小图像时."
+"执行 Lanczos 插值。这是最慢的图像调整大小模式，但通常可以提供最佳效果，尤其是"
+"在缩小图像时。"
 
 #: doc/classes/Image.xml
 msgid "Image does not have alpha."
-msgstr "图片没有Alpha通道."
+msgstr "图片没有 Alpha 通道。"
 
 #: doc/classes/Image.xml
 msgid "Image stores alpha in a single bit."
-msgstr "图像将Alpha存储在单个bit中."
+msgstr "图像将 Alpha 存储在单个 bit 中。"
 
 #: doc/classes/Image.xml
 msgid "Image uses alpha."
-msgstr "图像使用阿尔法。"
+msgstr "图像使用 Alpha。"
 
 #: doc/classes/Image.xml
 msgid "Use S3TC compression."
-msgstr "使用S3TC压缩。"
+msgstr "使用 S3TC 压缩。"
 
 #: doc/classes/Image.xml
 msgid "Use PVRTC2 compression."
-msgstr "使用PVRTC2压缩。"
+msgstr "使用 PVRTC2 压缩。"
 
 #: doc/classes/Image.xml
 msgid "Use PVRTC4 compression."
-msgstr "使用PVRTC4压缩。"
+msgstr "使用 PVRTC4 压缩。"
 
 #: doc/classes/Image.xml
 msgid "Use ETC compression."
-msgstr "使用ETC压缩。"
+msgstr "使用 ETC 压缩。"
 
 #: doc/classes/Image.xml
 msgid "Use ETC2 compression."
@@ -37002,7 +37015,7 @@ msgstr ""
 #: doc/classes/ImmediateGeometry.xml
 msgid ""
 "Simple helper to draw an UV sphere with given latitude, longitude and radius."
-msgstr "用于绘制给定经纬度和半径的UV球体的简单辅助工具。"
+msgstr "用于绘制给定经纬度和半径的 UV 球体的简单辅助工具。"
 
 #: doc/classes/ImmediateGeometry.xml
 msgid ""
@@ -37022,11 +37035,11 @@ msgstr ""
 
 #: doc/classes/ImmediateGeometry.xml
 msgid "Clears everything that was drawn using begin/end."
-msgstr "清除使用begin/end绘制的一切内容。"
+msgstr "清除使用 begin/end 绘制的一切内容。"
 
 #: doc/classes/ImmediateGeometry.xml
 msgid "Ends a drawing context and displays the results."
-msgstr "结束正在绘制的context并显示其结果。"
+msgstr "结束正在绘制的上下文并显示其结果。"
 
 #: doc/classes/ImmediateGeometry.xml
 msgid "The current drawing color."
@@ -37078,10 +37091,10 @@ msgid ""
 "[method parse_input_event] instead."
 msgstr ""
 "这将模拟按下指定的按键动作。\n"
-"强度可以用于非布尔运算的动作，它的范围在0 到 1之间，代表给定动作的力度。\n"
-"[b]注意：[/b]这个方法不会引起任何[method Node._input]调用。它旨在与[method "
-"is_action_pressed]和[method is_action_just_pressed]一起使用。如果你想模拟"
-"[code]_input[/code]，请使用[method parse_input_event]代替。"
+"强度可以用于非布尔运算的动作，它的范围在 0 到 1 之间，代表给定动作的力度。\n"
+"[b]注意：[/b]这个方法不会引起任何 [method Node._input] 调用。它旨在与 "
+"[method is_action_pressed] 和 [method is_action_just_pressed] 一起使用。如果"
+"你想模拟 [code]_input[/code]，请使用 [method parse_input_event] 代替。"
 
 #: doc/classes/Input.xml
 msgid "If the specified action is already pressed, this will release it."
@@ -37170,8 +37183,8 @@ msgid ""
 "get_action_strength(\"negative_action\")[/code]."
 msgstr ""
 "通过指定两个动作来获取轴的输入，一个是负的，一个是正的。\n"
-"这是写[code]Input.get_action_strength(\"positive_action\")-Input."
-"get_action_strength(\"negative_action\")[/code]的简写。"
+"这是 [code]Input.get_action_strength(\"positive_action\")-Input."
+"get_action_strength(\"negative_action\")[/code] 的简写。"
 
 #: doc/classes/Input.xml
 msgid ""
@@ -37181,7 +37194,7 @@ msgstr "返回一个 [Array]，包含当前所有连接手柄的设备 ID。"
 
 #: doc/classes/Input.xml
 msgid "Returns the currently assigned cursor shape (see [enum CursorShape])."
-msgstr "返回当前指定的光标形状（参阅 [enum CursorShape]）。"
+msgstr "返回当前指定的光标形状（见 [enum CursorShape]）。"
 
 #: doc/classes/Input.xml
 msgid ""
@@ -37192,11 +37205,11 @@ msgid ""
 "measurement for each axis is m/s² while on iOS it's a multiple of the "
 "Earth's gravitational acceleration [code]g[/code] (~9.81 m/s²)."
 msgstr ""
-"如果设备有加速度传感器，则返回设备的重力。否则，该方法返回[constant Vector3."
+"如果设备有加速度传感器，则返回设备的重力。否则，该方法返回 [constant Vector3."
 "ZERO]。\n"
-"[b]注意：[/b]这个方法只在Android和iOS上工作。在其他平台上，它总是返回"
-"[constant Vector3.ZERO]。在Android上，每个轴的测量单位是m/s²，而在iOS上，它是"
-"地球重力加速度的倍数[code]g[/code]（~9.81 m/s²）。"
+"[b]注意：[/b]这个方法只在 Android 和 iOS 上工作。在其他平台上，它总是返回 "
+"[constant Vector3.ZERO]。在 Android 上，每个轴的测量单位是 m/s²，而在 iOS "
+"上，它是地球重力加速度的倍数 [code]g[/code]（~9.81 m/s²）。"
 
 #: doc/classes/Input.xml
 msgid ""
@@ -37206,16 +37219,16 @@ msgid ""
 "[b]Note:[/b] This method only works on Android and iOS. On other platforms, "
 "it always returns [constant Vector3.ZERO]."
 msgstr ""
-"如果设备有陀螺仪传感器，则返回围绕设备X、Y、Z轴的旋转速率，单位为rad/s。否"
-"则，该方法返回[constant Vector3.ZERO]。\n"
-"[b]注意：[/b]这个方法只在Android和iOS上工作。在其他平台上，总是返回[constant "
-"Vector3.ZERO]。"
+"如果设备有陀螺仪传感器，则返回围绕设备 X、Y、Z 轴的旋转速率，单位为 rad/s。否"
+"则，该方法返回 [constant Vector3.ZERO]。\n"
+"[b]注意：[/b]这个方法只在 Android 和 iOS 上工作。在其他平台上，总是返回 "
+"[constant Vector3.ZERO]。"
 
 #: doc/classes/Input.xml
 msgid ""
 "Returns the current value of the joypad axis at given index (see [enum "
 "JoystickList])."
-msgstr "返回给定索引的游戏手柄轴的当前值，参阅[enum JoystickList]。"
+msgstr "返回给定索引的游戏手柄轴的当前值（见 [enum JoystickList]）。"
 
 #: doc/classes/Input.xml
 msgid "Returns the index of the provided axis name."
@@ -37236,15 +37249,16 @@ msgid ""
 "Receives a gamepad button from [enum JoystickList] and returns its "
 "equivalent name as a string."
 msgstr ""
-"从[enum JoystickList]中接收游戏手柄按钮，并将其对应的名称作为一个字符串返回。"
+"从 [enum JoystickList] 中接收游戏手柄按钮，并将其对应的名称作为一个字符串返"
+"回。"
 
 #: doc/classes/Input.xml
 msgid ""
 "Returns a SDL2-compatible device GUID on platforms that use gamepad "
 "remapping. Returns [code]\"Default Gamepad\"[/code] otherwise."
 msgstr ""
-"在使用游戏手柄重映射的平台上返回一个SDL2兼容的设备GUID。否则返回 "
-"[code]\"Default Gamepad\"[/code]默认游戏手柄。"
+"在使用游戏手柄重映射的平台上返回一个 SDL2 兼容的设备 GUID。否则返回 "
+"[code]\"Default Gamepad\"[/code] 默认游戏手柄。"
 
 #: doc/classes/Input.xml
 msgid "Returns the name of the joypad at the specified device index."
@@ -37485,7 +37499,7 @@ msgstr ""
 #: doc/classes/Input.xml
 msgid ""
 "Removes all mappings from the internal database that match the given GUID."
-msgstr "从内部数据库中删除与给定GUID匹配的所有映射."
+msgstr "从内部数据库中删除与给定 GUID 匹配的所有映射。"
 
 #: doc/classes/Input.xml
 msgid ""
@@ -37495,9 +37509,9 @@ msgid ""
 "[b]Note:[/b] This value can be immediately overwritten by the hardware "
 "sensor value on Android and iOS."
 msgstr ""
-"设置加速度传感器的加速度值。可以用于在没有硬件传感器的设备上进行调试，例如在"
-"PC上的编辑器中。\n"
-"[b]注意：[/b]这个值在Android和iOS上可立即被硬件传感器的值所覆盖。"
+"设置加速度传感器的加速度值。可以用于在没有硬件传感器的设备上进行调试，例如在 "
+"PC 上的编辑器中。\n"
+"[b]注意：[/b]这个值在 Android 和 iOS 上可立即被硬件传感器的值所覆盖。"
 
 #: doc/classes/Input.xml
 msgid ""
@@ -37532,7 +37546,7 @@ msgid ""
 "[b]Note:[/b] This method generates an [InputEventMouseMotion] to update "
 "cursor immediately."
 msgstr ""
-"设置视窗中使用的默认光标形状，而不是 [constant CURSOR_ARROW]。\n"
+"设置该视区中使用的默认光标形状，而不是 [constant CURSOR_ARROW]。\n"
 "[b]注意：[/b]如果要更改 [Control] 节点的默认光标形状，请改用 [member Control."
 "mouse_default_cursor_shape]。\n"
 "[b]注意：[/b]这个方法会生成一个 [InputEventMouseMotion] 以立即更新光标。"
@@ -37639,16 +37653,18 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 "如果为 [code]true[/code]，会对操作系统发送的类似输入事件进行累积。当启用输入"
 "累积时，在一帧中产生的所有输入事件将被合并，并在该帧完成渲染时发出。因此，这"
 "限制了每秒的输入方法调用次数，使之与渲染FPS相一致。\n"
-"输入累加在默认情况下是启用的。它可以被禁用，将以增加CPU使用率为代价，获得稍微"
+"输入累积在默认情况下是启用的。它可以被禁用，将以增加CPU使用率为代价，获得稍微"
 "更精确及更灵敏的输入。在需要自由绘制线条的应用中，一般应用在用户绘制线条时禁"
-"用输入累加，以获得紧跟实际输入的结果。"
+"用输入累加，以获得紧跟实际输入的结果。\n"
+"[b]注意：[/b]默认[i]禁用[/i]输入累积是出于向后兼容的缘故。然而我们推荐那些不"
+"需要非常活跃输入的游戏将其启用，能够降低 CPU 占用。"
 
 #: doc/classes/Input.xml
 msgid "Emitted when a joypad device has been connected or disconnected."
@@ -38056,7 +38072,8 @@ msgstr ""
 msgid ""
 "Stores information about joystick motions. One [InputEventJoypadMotion] "
 "represents one axis at a time."
-msgstr "存储关于操纵杆运动的信息。一个[InputEventJoypadMotion]一次代表一个轴。"
+msgstr ""
+"存储关于操纵杆运动的信息。一个 [InputEventJoypadMotion] 一次代表一个轴。"
 
 #: doc/classes/InputEventJoypadMotion.xml
 msgid "Axis identifier. Use one of the [enum JoystickList] axis constants."
@@ -38377,28 +38394,41 @@ msgstr "鼠标移动事件的输入事件类型。"
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
 "avoid visible gaps in lines if the user is moving the mouse quickly."
 msgstr ""
 "包含鼠标和笔的运动信息。支持相对、绝对位置和速度。见 [method Node._input]。\n"
-"[b]注意：[/b]默认情况下，这个事件最多只能在每一帧渲染中发出一次。如果你需要更"
-"精确的输入报告，请将 [member Input.use_accumulated_input] 设为 [code]false[/"
-"code]，让事件尽可能频繁地发射。如果你使用 InputEventMouseMotion 来画线，请考"
-"虑同时实现 [url=https://en.wikipedia.org/wiki/"
-"Bresenham%27s_line_algorithm]Bresenham 的线条算法[/url]，以避免在用户快速移动"
-"鼠标时出现可见的线条空隙。"
+"[b]注意：[/b]默认情况下，这个事件能够每帧发出多次，提供更精确的输入报告，但代"
+"价是更高的 CPU 占用。你可以将 [member Input.use_accumulated_input] 设为 "
+"[code]true[/code]，将每帧中的多个事件合并为单个事件进行发送。\n"
+"[b]注意：[/b]如果你使用 InputEventMouseMotion 来画线，请考虑同时实现"
+"[url=https://zh.wikipedia.org/zh-cn/"
+"%E5%B8%83%E9%9B%B7%E6%A3%AE%E6%BC%A2%E5%A7%86%E7%9B%B4%E7%B7%9A%E6%BC%94%E7%AE%97%E6%B3%95]"
+"布雷森汉姆直线算法[/url]，以避免在用户快速移动鼠标时出现可见的线条空隙。"
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid "Mouse and input coordinates"
 msgstr "鼠标和输入坐标"
 
 #: doc/classes/InputEventMouseMotion.xml
+#, fuzzy
+msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+"返回键盘布局的数量。\n"
+"[b]注意：[/b]本方法在Linux、macOS和Windows上实现。"
+
+#: doc/classes/InputEventMouseMotion.xml
 msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
@@ -38540,15 +38570,15 @@ msgstr ""
 #: doc/classes/InputMap.xml
 msgid ""
 "Adds an [InputEvent] to an action. This [InputEvent] will trigger the action."
-msgstr "给一个动作添加一个[InputEvent]。这个[InputEvent]将触发这个动作。"
+msgstr "给某个动作添加一个 [InputEvent]。这个 [InputEvent] 将触发这个动作。"
 
 #: doc/classes/InputMap.xml
 msgid "Removes an [InputEvent] from an action."
-msgstr "从一个动作中删除一个[InputEvent]。"
+msgstr "从某个动作中删除一个 [InputEvent]。"
 
 #: doc/classes/InputMap.xml
 msgid "Removes all events from an action."
-msgstr "从动作中删除所有事件。"
+msgstr "从某个动作中删除所有事件。"
 
 #: doc/classes/InputMap.xml
 msgid "Returns a deadzone value for the action."
@@ -38558,7 +38588,7 @@ msgstr "返回该操作的死区值。"
 msgid ""
 "Returns [code]true[/code] if the action has the given [InputEvent] "
 "associated with it."
-msgstr "如果该动作有给定的[InputEvent]与之相关，则返回 [code]true[/code]。"
+msgstr "如果该动作有给定的 [InputEvent] 与之相关，则返回 [code]true[/code]。"
 
 #: doc/classes/InputMap.xml
 msgid "Sets a deadzone value for the action."
@@ -38571,12 +38601,13 @@ msgid ""
 "An [InputEvent] can then be added to this action with [method "
 "action_add_event]."
 msgstr ""
-"在[InputMap]上添加一个空的动作，有一个可配置的死区[code]deadzone[/code]。\n"
-"然后可以用[method action_add_event]给这个动作添加一个[InputEvent]。"
+"在 [InputMap] 上添加一个空的动作，有一个可配置的死区 [code]deadzone[/"
+"code]。\n"
+"然后可以用 [method action_add_event] 给这个动作添加一个 [InputEvent]。"
 
 #: doc/classes/InputMap.xml
 msgid "Removes an action from the [InputMap]."
-msgstr "从[InputMap]中删除一个动作。"
+msgstr "从 [InputMap] 中删除一个动作。"
 
 #: doc/classes/InputMap.xml
 msgid ""
@@ -38610,21 +38641,21 @@ msgstr ""
 
 #: doc/classes/InputMap.xml
 msgid "Returns an array of all actions in the [InputMap]."
-msgstr "返回[InputMap]中所有动作的数组。"
+msgstr "返回 [InputMap] 中所有动作的数组。"
 
 #: doc/classes/InputMap.xml
 msgid ""
 "Returns [code]true[/code] if the [InputMap] has a registered action with the "
 "given name."
-msgstr "如果[InputMap]有一个给定名称的注册动作，返回 [code]true[/code]。"
+msgstr "如果 [InputMap] 有一个给定名称的注册动作，返回 [code]true[/code]。"
 
 #: doc/classes/InputMap.xml
 msgid ""
 "Clears all [InputEventAction] in the [InputMap] and load it anew from "
 "[ProjectSettings]."
 msgstr ""
-"清除[InputMap]中的所有[InputEventAction]，并从[ProjectSettings]项目设置中重新"
-"加载它。"
+"清除 [InputMap] 中的所有 [InputEventAction]，并从 [ProjectSettings] 项目设置"
+"中重新加载它。"
 
 #: doc/classes/InstancePlaceholder.xml
 msgid "Placeholder for the root [Node] of a [PackedScene]."
@@ -38663,7 +38694,7 @@ msgid ""
 "Object.call_deferred] if calling from a thread."
 msgstr ""
 "获取调用 [method replace_by_instance] 时默认加载的 [PackedScene] 资源文件的路"
-"径。不是线程安全的。如果从线程调用，请使用[method Object.call_deferred]。"
+"径。不是线程安全的。如果从线程调用，请使用 [method Object.call_deferred]。"
 
 #: doc/classes/InstancePlaceholder.xml
 msgid ""
@@ -38757,7 +38788,7 @@ msgstr ""
 
 #: doc/classes/InterpolatedCamera.xml
 msgid "[i]Deprecated.[/i] Camera which moves toward another node."
-msgstr "[i] 已弃用。[/i] 向另一个节点移动的相机。"
+msgstr "[i] 已弃用。[/i]向另一个节点移动的相机。"
 
 #: doc/classes/InterpolatedCamera.xml
 msgid ""
@@ -38767,10 +38798,10 @@ msgid ""
 "If it is not [member enabled] or does not have a valid target set, "
 "InterpolatedCamera acts like a normal Camera."
 msgstr ""
-"[i]已经弃用（将在Godot 4.0 中删除）。[/i]插值相机是一种[Camera]，可以平稳地移"
+"[i]已弃用（将在Godot 4.0 中删除）。[/i]插值相机是一种 [Camera]，可以平稳地移"
 "动，以匹配目标节点的位置和旋转。\n"
-"如果它不是[member enabled]或没有有效的目标集，InterpolatedCamera 的行为就像一"
-"个正常的相机。"
+"如果它不是 [member enabled] 或没有有效的目标集，InterpolatedCamera 的行为就像"
+"一个正常的相机。"
 
 #: doc/classes/InterpolatedCamera.xml
 msgid "Sets the node to move toward and orient with."
@@ -38783,10 +38814,9 @@ msgid ""
 msgstr "如果为 [code]true[/code]，并且设置了目标，相机将自动移动。"
 
 #: doc/classes/InterpolatedCamera.xml
-#, fuzzy
 msgid ""
 "The camera's process callback. See [enum InterpolatedCameraProcessMode]."
-msgstr "相机的过程回调。请参阅[enum Camera2DProcessMode]。"
+msgstr "该相机的处理回调。见 [enum InterpolatedCameraProcessMode]。"
 
 #: doc/classes/InterpolatedCamera.xml
 msgid ""
@@ -38796,7 +38826,7 @@ msgstr "相机向其目标移动的速度。较高的值将导致相机的运动
 
 #: doc/classes/InterpolatedCamera.xml
 msgid "The target's [NodePath]."
-msgstr "目标的[NodePath]。"
+msgstr "目标的 [NodePath]。"
 
 #: doc/classes/IntervalTweener.xml
 msgid "Creates an idle interval in a [SceneTreeTween] animation."
@@ -38847,7 +38877,7 @@ msgstr ""
 
 #: doc/classes/IP.xml
 msgid "Returns all the user's current IPv4 and IPv6 addresses as an array."
-msgstr "以数组形式返回所有用户的当前IPv4和IPv6地址。"
+msgstr "以数组形式返回所有用户的当前 IPv4 和 IPv6 地址。"
 
 #: doc/classes/IP.xml
 msgid ""
@@ -38905,8 +38935,8 @@ msgid ""
 "method). The address type returned depends on the [enum Type] constant given "
 "as [code]ip_type[/code]."
 msgstr ""
-"在解析时返回一个给定的主机名的IPv4或IPv6地址（阻塞类型方法）。返回的地址类型"
-"取决于作为[code]ip_type[/code]的[enum Type]常量。"
+"在解析时返回一个给定的主机名的 IPv4 或 IPv6 地址（阻塞类型方法）。返回的地址"
+"类型取决于作为 [code]ip_type[/code] 的 [enum Type] 常量。"
 
 #: doc/classes/IP.xml
 msgid ""
@@ -38947,7 +38977,7 @@ msgid ""
 "Maximum number of concurrent DNS resolver queries allowed, [constant "
 "RESOLVER_INVALID_ID] is returned if exceeded."
 msgstr ""
-"允许的最大并发DNS解析器查询数量，如果超过，则返回[constant "
+"允许的最大并发 DNS 解析器查询数量，如果超过，则返回 [constant "
 "RESOLVER_INVALID_ID]。"
 
 #: doc/classes/IP.xml
@@ -38978,7 +39008,6 @@ msgid ""
 msgstr "提供可选中项目（和/或图标）列表的控件，既可以是单列，也可以是多列。"
 
 #: doc/classes/ItemList.xml
-#, fuzzy
 msgid ""
 "This control provides a selectable list of items that may be in a single (or "
 "multiple columns) with option of text, icons, or both text and icon. "
@@ -39008,12 +39037,19 @@ msgstr ""
 "本、图标或同时选择文本和图标。支持工具提示，列表中的每个项目都可以是不同"
 "的。\n"
 "列表中可选择的项目可以被选择或取消选择，并且可以启用多重选择。用鼠标右键选择"
-"也可以被启用，以允许使用弹出式上下文菜单。项目也可以通过双击它们或按Enter回车"
-"键来 \"激活\"。\n"
-"项目文本只支持单行字符串，字符串中的换行字符（例如[code]\\n[/code]）不会产生"
-"换行。在[constant ICON_MODE_TOP]模式下，文本自适应(warp)是启用的，但默认情况"
-"下会调整列的宽度以完全适合其内容。你需要设置[member fixed_column_width]大于0"
-"来包住文本。"
+"也可以被启用，以允许使用弹出式上下文菜单。项目也可以通过双击它们或按回车键"
+"来“激活”。\n"
+"项目文本只支持单行字符串，字符串中的换行字符（例如 [code]\\n[/code]）不会产生"
+"换行。文本换行会在 [constant ICON_MODE_TOP] 模式下启用，但默认情况下会调整列"
+"的宽度以完全适合其内容。你需要将 [member fixed_column_width] 设为大于 0 的值"
+"才能让文本换行。\n"
+"[b]增量搜索：[/b]与 [PopupMenu] 和 [Tree] 类似，[ItemList] 也支持在聚焦控件时"
+"在列表中进行搜索。按下与某个条目名称首字母一致的按键，就会选中以该字母开头的"
+"第一个条目。在此之后，进行增量搜索的办法有两种：1）在超时前再次按下同一个按"
+"键，选中以该字母开头的下一个条目。2）在超时前按下剩余字母对应的按键，直接匹配"
+"并选中所需的条目。这两个动作都会在最后一次按键超时后重置回列表顶端。你可以通"
+"过 [member ProjectSettings.gui/timers/incremental_search_max_interval_msec] "
+"修改超时时长。"
 
 #: doc/classes/ItemList.xml
 msgid "Adds an item to the item list with no text, only an icon."
@@ -39026,9 +39062,9 @@ msgid ""
 "with no icon.\n"
 "If selectable is [code]true[/code], the list item will be selectable."
 msgstr ""
-"将一个项目添加到项目列表中，并指定文本。指定一个图标[code]icon[/code]，或者图"
-"标[code]icon[/code]使用空[code]null[/code]作为没有图标的列表项。\n"
-"如果可选择填[code]true[/code]，列表项将是可选择的。"
+"将一个项目添加到项目列表中，并指定文本。指定一个图标 [code]icon[/code]，或者"
+"图标 [code]icon[/code] 使用空 [code]null[/code] 作为没有图标的列表项。\n"
+"如果可选择填 [code]true[/code]，列表项将是可选择的。"
 
 #: doc/classes/ItemList.xml
 msgid "Removes all items from the list."
@@ -39059,13 +39095,13 @@ msgstr "返回当前列表中的项目数。"
 msgid ""
 "Returns the custom background color of the item specified by [code]idx[/"
 "code] index."
-msgstr "返回由[code]idx[/code]索引指定的项目的自定义背景颜色。"
+msgstr "返回由 [code]idx[/code] 索引指定的项目的自定义背景颜色。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "Returns the custom foreground color of the item specified by [code]idx[/"
 "code] index."
-msgstr "返回由[code]idx[/code]索引指定项目的自定义前景颜色。"
+msgstr "返回由 [code]idx[/code] 索引指定项目的自定义前景颜色。"
 
 #: doc/classes/ItemList.xml
 msgid "Returns the icon associated with the specified index."
@@ -39073,13 +39109,13 @@ msgstr "返回与指定索引相关的图标。"
 
 #: doc/classes/ItemList.xml
 msgid "Returns a [Color] modulating item's icon at the specified index."
-msgstr "返回指定索引处的[Color]颜色调制(modulating) 项的图标。"
+msgstr "返回指定索引处的 [Color] 颜色调制项的图标。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "Returns the region of item's icon used. The whole icon will be used if the "
 "region has no area."
-msgstr "返回项目图标的使用区域。如果该区域大小为0，整个图标将被使用。"
+msgstr "返回项目图标的使用区域。如果该区域大小为 0，整个图标将被使用。"
 
 #: doc/classes/ItemList.xml
 msgid "Returns the metadata value of the specified index."
@@ -39159,13 +39195,13 @@ msgstr ""
 msgid ""
 "Sets the background color of the item specified by [code]idx[/code] index to "
 "the specified [Color]."
-msgstr "将[code]idx[/code]索引指定的项目的背景色设置为指定的颜色[Color]。"
+msgstr "将 [code]idx[/code] 索引指定的项目的背景色设置为指定的颜色 [Color]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "Sets the foreground color of the item specified by [code]idx[/code] index to "
 "the specified [Color]."
-msgstr "将[code]idx[/code]索引指定项目的前景颜色设置为指定的颜色[Color]。"
+msgstr "将 [code]idx[/code] 索引指定项目的前景颜色设置为指定的颜色 [Color]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
@@ -39174,17 +39210,17 @@ msgid ""
 "(when double-clicking or pressing Enter)."
 msgstr ""
 "禁用（或启用）指定索引上的项目。\n"
-"禁用的项目不能被选中，也不会触发激活信号（当双击或按Enter回车键）。"
+"禁用的项目不能被选中，也不会触发激活信号（当双击或按回车键）。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "Sets (or replaces) the icon's [Texture] associated with the specified index."
-msgstr "设置（或替换）与指定索引相关的图标的纹理[Texture]。"
+msgstr "设置（或替换）与指定索引相关的图标的纹理 [Texture]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "Sets a modulating [Color] of the item associated with the specified index."
-msgstr "设置与指定索引相关的项目的调制颜色[Color]。"
+msgstr "设置与指定索引相关的项目的调制颜色 [Color]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
@@ -39263,19 +39299,20 @@ msgid ""
 "affected."
 msgstr ""
 "所有图标将被调整到的尺寸。\n"
-"如果X或Y分量不大于0，图标的大小将不会受到影响。"
+"如果 X 或 Y 分量不大于 0，图标的大小将不会受到影响。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "The icon position, whether above or to the left of the text. See the [enum "
 "IconMode] constants."
-msgstr "图标的位置，是在文本的上方还是在文本的左边。参阅[enum IconMode]常量。"
+msgstr ""
+"图标的位置，是在文本的上方还是在文本的左边。参阅 [enum IconMode] 常量。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "The scale of icon applied after [member fixed_icon_size] and transposing "
 "takes effect."
-msgstr "在[member fixed_icon_size]和转置生效后应用的图标比例。"
+msgstr "在 [member fixed_icon_size] 和转置生效后应用的图标比例。"
 
 #: doc/classes/ItemList.xml
 msgid ""
@@ -39320,7 +39357,7 @@ msgstr "允许单选或多选。参阅[enum SelectMode]常量。"
 msgid ""
 "Triggered when specified list item is activated via double-clicking or by "
 "pressing Enter."
-msgstr "当指定的列表项目通过双击或按Enter激活时触发。"
+msgstr "当指定的列表项目通过双击或按回车键激活时触发。"
 
 #: doc/classes/ItemList.xml
 msgid ""
@@ -39352,7 +39389,7 @@ msgstr "在允许多选的列表上更改多选时触发。"
 msgid ""
 "Triggered when a left mouse click is issued within the rect of the list but "
 "on empty space."
-msgstr "当鼠标左键在列表的矩形(rect)范围内但在空白处单击时，会被触发。"
+msgstr "当鼠标左键在列表的矩形范围内但在空白处单击时，会被触发。"
 
 #: doc/classes/ItemList.xml
 msgid ""
@@ -39360,8 +39397,8 @@ msgid ""
 "on empty space.\n"
 "[member allow_rmb_select] must be enabled."
 msgstr ""
-"当在列表的矩形(rect)范围内但在空白处单击鼠标右键时被触发。\n"
-"[member allow_rmb_select]必须被启用。"
+"当在列表的矩形范围内但在空白处单击鼠标右键时被触发。\n"
+"[member allow_rmb_select] 必须被启用。"
 
 #: doc/classes/ItemList.xml
 msgid "Icon is drawn above the text."
@@ -39377,7 +39414,7 @@ msgstr "仅允许选择单个项目。"
 
 #: doc/classes/ItemList.xml
 msgid "Allows selecting multiple items by holding Ctrl or Shift."
-msgstr "允许通过按住Ctrl或Shift选择多个项目。"
+msgstr "允许通过按住 Ctrl 或 Shift 选择多个项目。"
 
 #: doc/classes/ItemList.xml doc/classes/Tree.xml
 msgid "Default text [Color] of the item."
@@ -39385,7 +39422,7 @@ msgstr "项目的默认文本颜色 [Color]。"
 
 #: doc/classes/ItemList.xml doc/classes/Tree.xml
 msgid "Text [Color] used when the item is selected."
-msgstr "选择项目时使用的文本颜色[Color]。"
+msgstr "选择项目时使用的文本颜色 [Color]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
@@ -39421,27 +39458,27 @@ msgstr "[ItemList] 的默认样式盒 [StyleBox]，即在控件未获得焦点�
 
 #: doc/classes/ItemList.xml
 msgid "[StyleBox] used when the [ItemList] is being focused."
-msgstr "当[ItemList]被聚焦时使用的样式盒[StyleBox]。"
+msgstr "当 [ItemList] 被聚焦时使用的样式盒 [StyleBox]。"
 
 #: doc/classes/ItemList.xml
 msgid "[StyleBox] used for the cursor, when the [ItemList] is being focused."
-msgstr "当[ItemList]被聚焦时，用于光标的样式盒[StyleBox]。"
+msgstr "当 [ItemList] 被聚焦时，用于光标的样式盒 [StyleBox]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "[StyleBox] used for the cursor, when the [ItemList] is not being focused."
-msgstr "当[ItemList]没有被聚焦时，用于光标的样式盒[StyleBox]。"
+msgstr "当 [ItemList] 没有被聚焦时，用于光标的样式盒 [StyleBox]。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "[StyleBox] for the selected items, used when the [ItemList] is not being "
 "focused."
-msgstr "所选项的样式盒[StyleBox]，当[ItemList]没有获得焦点时使用。"
+msgstr "所选项的样式盒 [StyleBox]，当 [ItemList] 没有获得焦点时使用。"
 
 #: doc/classes/ItemList.xml
 msgid ""
 "[StyleBox] for the selected items, used when the [ItemList] is being focused."
-msgstr "所选项的样式盒[StyleBox]，当[ItemList]没有获得焦点时使用。"
+msgstr "所选项的样式盒 [StyleBox]，当 [ItemList] 没有获得焦点时使用。"
 
 #: doc/classes/JavaScript.xml
 msgid ""
@@ -39670,7 +39707,7 @@ msgstr "创建 Android 插件"
 
 #: doc/classes/Joint.xml
 msgid "Base class for all 3D joints."
-msgstr "所有3D关节的基类。"
+msgstr "所有 3D 关节的基类。"
 
 #: doc/classes/Joint.xml
 msgid ""
@@ -39694,11 +39731,11 @@ msgstr "如果为 [code]true[/code]，则节点的两个主体无法相互碰撞
 
 #: doc/classes/Joint.xml
 msgid "The node attached to the first side (A) of the joint."
-msgstr "连接到关节第一侧(A)的节点。"
+msgstr "连接到关节第一侧（A）的节点。"
 
 #: doc/classes/Joint.xml
 msgid "The node attached to the second side (B) of the joint."
-msgstr "连接到关节第二侧(B)的节点。"
+msgstr "连接到关节第二侧（B）的节点。"
 
 #: doc/classes/Joint.xml
 msgid ""
@@ -39957,9 +39994,9 @@ msgid ""
 "- [code]params[/code]: An array or dictionary of parameters being passed to "
 "the method."
 msgstr ""
-"返回JSON-RPC通知形式的字典。通知是一次性的信息，不需要有响应。\n"
-"- [code]method[/code]:被调用的方法的名称。\n"
-"- [code]params[/code]:传递给该方法的参数的数组或字典。"
+"返回 JSON-RPC 通知形式的字典。通知是一次性的信息，不需要有响应。\n"
+"- [code]method[/code]：被调用的方法的名称。\n"
+"- [code]params[/code]：传递给该方法的参数的数组或字典。"
 
 #: doc/classes/JSONRPC.xml
 msgid ""
@@ -39972,11 +40009,11 @@ msgid ""
 "- [code]id[/code]: Uniquely identifies this request. The server is expected "
 "to send a response with the same ID."
 msgstr ""
-"以JSON-RPC请求的形式返回字典。请求被发送到服务器，并期望得到响应。ID 字段用于"
-"服务器指定它正在响应的确切请求。\n"
-"- [code]method[/code]:被调用的方法的名称。\n"
-"- [code]params[/code]:传递给该方法的参数的数组或字典。\n"
-"- [code]id[/code]:唯一标识此请求。服务器应发送具有相同 ID 的响应。"
+"以 JSON-RPC 请求的形式返回字典。请求被发送到服务器，并期望得到响应。ID 字段用"
+"于服务器指定它正在响应的确切请求。\n"
+"- [code]method[/code]：被调用的方法的名称。\n"
+"- [code]params[/code]：传递给该方法的参数的数组或字典。\n"
+"- [code]id[/code]：唯一标识此请求。服务器应发送具有相同 ID 的响应。"
 
 #: doc/classes/JSONRPC.xml
 msgid ""
@@ -40016,9 +40053,8 @@ msgid ""
 "[code]action[/code]: The action to be run, as a Dictionary in the form of a "
 "JSON-RPC request or notification."
 msgstr ""
-"给定采用 JSON-RPC 请求形式的字典：解压请求并运行它。通过查看名为 \"method\" "
-"的字段并在 JSONRPC 对象中查找等效命名的函数来解析方法。如果找到，则调用该方"
-"法。\n"
+"给定采用 JSON-RPC 请求形式的字典：解压请求并运行它。通过查看名为“method”的字"
+"段并在 JSONRPC 对象中查找等效命名的函数来解析方法。如果找到，则调用该方法。\n"
 "要添加新的受支持方法，请扩展 JSONRPC 类并在你的子类上调用 [method "
 "process_action]。\n"
 "[code]action[/code]：要运行的动作，作为 JSON-RPC 请求或通知形式的字典。"
@@ -40217,8 +40253,8 @@ msgid ""
 "platform's motion, it will always be first in the slide collisions."
 msgstr ""
 "沿着向量移动物体。如果这个物体与另一个物体相撞，它将沿着另一个物体滑动，而不"
-"是立即停止。如果另一个物体是[KinematicBody]或[RigidBody]，它也会被另一个物体"
-"的运动所影响。你可以用它来制作移动和旋转的平台，或者让节点推动其他节点。\n"
+"是立即停止。如果另一个物体是 [KinematicBody] 或 [RigidBody]，它也会被另一个物"
+"体的运动所影响。你可以用它来制作移动和旋转的平台，或者让节点推动其他节点。\n"
 "这个方法应该在 [method Node._physics_process] 中使用，或者在被 [method Node."
 "_physics_process] 调用的方法中使用，因为它在计算时，自动使用物理步骤的 "
 "[code]delta[/code] 值。否则，模拟将以不正确的速度运行。\n"
@@ -40411,7 +40447,7 @@ msgid ""
 "value is always positive and only valid after calling [method "
 "move_and_slide] and when [method is_on_floor] returns [code]true[/code]."
 msgstr ""
-"根据[code]up_direction[/code]返回最后一个碰撞点的地板碰撞角度，默认为"
+"根据 [code]up_direction[/code] 返回最后一个碰撞点的地板碰撞角度，默认为 "
 "[code]Vector2.UP[/code]。此值始终为正值，并且仅在调用 [method "
 "move_and_slide] 后且当 [method is_on_floor] 返回 [code]true[/code] 时有效。"
 
@@ -40421,8 +40457,8 @@ msgid ""
 "latest collision that occurred during the last call to [method "
 "move_and_slide]."
 msgstr ""
-"返回[KinematicCollision2D]，它包含在最后一次调用[method move_and_slide]时发生"
-"的最新碰撞信息。"
+"返回 [KinematicCollision2D]，它包含在最后一次调用 [method move_and_slide] 时"
+"发生的最新碰撞信息。"
 
 #: doc/classes/KinematicBody2D.xml
 msgid ""
@@ -40570,9 +40606,9 @@ msgid ""
 "colliding object, the remaining motion, and the collision position. This "
 "information can be used to calculate a collision response."
 msgstr ""
-"包含[KinematicBody]碰撞的碰撞数据。当[KinematicBody]使用[method "
-"KinematicBody.move_and_collide]移动时，如果它检测到与另一个物体的碰撞就会停"
-"止。如果检测到碰撞，将返回一个KinematicCollision对象。\n"
+"包含 [KinematicBody] 碰撞的碰撞数据。当 [KinematicBody] 使用 [method "
+"KinematicBody.move_and_collide] 移动时，如果它检测到与另一个物体的碰撞就会停"
+"止。如果检测到碰撞，将返回一个 KinematicCollision 对象。\n"
 "这个对象包含关于碰撞的信息，包括碰撞的物体、剩余的运动和碰撞的位置。这些信息"
 "可以用来计算碰撞响应。"
 
@@ -40581,8 +40617,8 @@ msgid ""
 "The collision angle according to [code]up_direction[/code], which is "
 "[code]Vector3.UP[/code] by default. This value is always positive."
 msgstr ""
-"根据[code]up_direction[/code]的碰撞角度，默认为[code]Vector3.UP[/code]。这个"
-"值总是为正。"
+"根据 [code]up_direction[/code] 的碰撞角度，默认为 [code]Vector3.UP[/code]。这"
+"个值总是为正。"
 
 #: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
 msgid "The colliding body."
@@ -40819,19 +40855,19 @@ msgstr "通过展开行来对齐整个文本。"
 
 #: doc/classes/Label.xml
 msgid "Default text [Color] of the [Label]."
-msgstr "[Label]标签的默认文本颜色[Color]。"
+msgstr "[Label] 标签的默认文本颜色 [Color]。"
 
 #: doc/classes/Label.xml
 msgid "[Color] of the text's shadow effect."
-msgstr "文本阴影效果的颜色[Color]。"
+msgstr "文本阴影效果的颜色 [Color]。"
 
 #: doc/classes/Label.xml
 msgid "The tint of [Font]'s outline. See [member DynamicFont.outline_color]."
-msgstr "[Font]轮廓的色调。参阅[member DynamicFont.outline_color]。"
+msgstr "[Font] 轮廓的色调。见 [member DynamicFont.outline_color]。"
 
 #: doc/classes/Label.xml
 msgid "Vertical space between lines in multiline [Label]."
-msgstr "多行[Label]中各行之间的垂直空间。"
+msgstr "多行 [Label] 中各行之间的垂直空间。"
 
 #: doc/classes/Label.xml
 msgid ""
@@ -41169,7 +41205,7 @@ msgstr "如果为 [code]true[/code]，灯光只在编辑器中出现，在运行
 
 #: doc/classes/Light.xml
 msgid "The light's bake mode. See [enum BakeMode]."
-msgstr "灯光的烘焙模式。参阅[enum BakeMode]。"
+msgstr "灯光的烘焙模式。见 [enum BakeMode]。"
 
 #: doc/classes/Light.xml
 msgid ""
@@ -43605,11 +43641,14 @@ msgid ""
 "[method Mesh.surface_get_material] to get materials associated with the "
 "[Mesh] resource."
 msgstr ""
+"返回该 [Mesh] 资源上某个表面的 [Material] 覆盖项。\n"
+"[b]注意：[/b]这个函数只会返回与这个 [MeshInstance] 相关联的[i]覆盖[/i]材质。"
+"要获取与该 [Mesh] 相关联的材质，请考虑使用 [method get_active_material] 或 "
+"[method Mesh.surface_get_material]。"
 
 #: doc/classes/MeshInstance.xml
-#, fuzzy
 msgid "Returns the number of surface override materials."
-msgstr "返回表面材质的数量。"
+msgstr "返回表面材质覆盖项的数量。"
 
 #: doc/classes/MeshInstance.xml
 msgid ""
@@ -43664,6 +43703,8 @@ msgid ""
 "resource. This material is associated with this [MeshInstance] rather than "
 "with the [Mesh] resource."
 msgstr ""
+"设置该 [Mesh] 资源的指定表面的 [Material] 覆盖项。这个材质会与这个 "
+"[MeshInstance] 关联，而不是与 [Mesh] 资源关联。"
 
 #: doc/classes/MeshInstance.xml
 msgid "The [Mesh] resource for the instance."
@@ -44658,7 +44699,6 @@ msgid "Mesh-based navigation and pathfinding node."
 msgstr "基于网格的导航和寻路节点。"
 
 #: doc/classes/Navigation.xml
-#, fuzzy
 msgid ""
 "[i]Deprecated.[/i] [Navigation] node and [method get_simple_path] are "
 "deprecated and will be removed in a future version. Use [method "
@@ -44669,6 +44709,8 @@ msgid ""
 "class also assists with aligning navigation agents with the meshes they are "
 "navigating on."
 msgstr ""
+"[i]已弃用。[/i][Navigation] 节点和 [method get_simple_path] 已弃用，会在将来"
+"的版本中移除。请用 [method NavigationServer.map_get_path] 替代。\n"
 "在 [NavigationMesh] 的集合中提供导航和寻路功能。默认情况下，这些将自动从子 "
 "[NavigationMeshInstance] 节点中收集。除了基本的寻路之外，这个类还能帮助导航代"
 "理与其所导航的网格对齐。"
@@ -44716,7 +44758,6 @@ msgid "Returns the [RID] of the navigation map on the [NavigationServer]."
 msgstr "返回这个导航地图在 [NavigationServer] 上的 [RID]。"
 
 #: doc/classes/Navigation.xml
-#, fuzzy
 msgid ""
 "[i]Deprecated.[/i] [Navigation] node and [method get_simple_path] are "
 "deprecated and will be removed in a future version. Use [method "
@@ -44726,6 +44767,8 @@ msgid ""
 "agent properties associated with each [NavigationMesh] (radius, height, "
 "etc.) are considered in the path calculation, otherwise they are ignored."
 msgstr ""
+"[i]已弃用。[/i][Navigation] 节点和 [method get_simple_path] 已弃用，会在将来"
+"的版本中移除。请用 [method NavigationServer.map_get_path] 替代。\n"
 "返回两个给定点之间的路径。点都是在局部坐标空间中的。如果 [code]optimize[/"
 "code] 为 [code]true[/code]（默认），则计算路径时会考虑每个 [NavigationMesh] "
 "所关联的代理的属性（半径、高度等），否则会被忽略。"
@@ -44770,7 +44813,6 @@ msgid "2D navigation and pathfinding node."
 msgstr "2D 导航和寻路节点。"
 
 #: doc/classes/Navigation2D.xml
-#, fuzzy
 msgid ""
 "[i]Deprecated.[/i] [Navigation2D] node and [method get_simple_path] are "
 "deprecated and will be removed in a future version. Use [method "
@@ -44779,6 +44821,8 @@ msgid ""
 "as a collection of [NavigationPolygon] resources. By default, these are "
 "automatically collected from child [NavigationPolygonInstance] nodes."
 msgstr ""
+"[i]已弃用。[/i][Navigation2D] 节点和 [method get_simple_path] 已弃用，会在将"
+"来的版本中移除。请用 [method Navigation2DServer.map_get_path] 替代。\n"
 "Navigation2D 在 2D 区域内提供导航和寻路，该区域以 [NavigationPolygon] 资源合"
 "集的形式指定。默认情况下，这些资源是自动从子项 [NavigationPolygonInstance] 节"
 "点中收集的。"
@@ -44798,7 +44842,6 @@ msgstr ""
 "[NavigationPolygonInstance]。"
 
 #: doc/classes/Navigation2D.xml
-#, fuzzy
 msgid ""
 "[i]Deprecated.[/i] [Navigation2D] node and [method get_simple_path] are "
 "deprecated and will be removed in a future version. Use [method "
@@ -44807,6 +44850,8 @@ msgid ""
 "space. If [code]optimize[/code] is [code]true[/code] (the default), the path "
 "is smoothed by merging path segments where possible."
 msgstr ""
+"[i]已弃用。[/i][Navigation2D] 节点和 [method get_simple_path] 已弃用，会在将"
+"来的版本中移除。请用 [method Navigation2DServer.map_get_path] 替代。\n"
 "返回两个给定点之间的路径。点是在局部坐标空间中的。如果 [code]optimize[/code] "
 "为 [code]true[/code]（默认值），路径将尽可能地合并路径段，从而平滑。"
 
@@ -44973,6 +45018,8 @@ msgid ""
 "returns both 2D and 3D created navigation maps as there is technically no "
 "distinction between them."
 msgstr ""
+"返回该 NavigationServer 上所有已创建的导航地图的 [RID]。会同时返回已创建的 "
+"2D 和 3D 导航地图，因为理论上它们之间是没有区别的。"
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Create a new map."
@@ -45006,6 +45053,21 @@ msgid ""
 "but it can also introduce bugs if used inappropriately without much "
 "foresight."
 msgstr ""
+"这个函数会立即强制进行指定导航地图的同步，参数 [code]map[/code] 为 [RID] 类"
+"型。默认情况下，导航地图仅会在每个物理帧的末尾进行同步。这个函数可用于立即"
+"（重新）计算该导航地图的所有导航网格和地区连接。这样就能够在修改地图后，在同"
+"一帧中立即对导航路径进行查询（需要时可以进行多次同步）。\n"
+"由于技术上的限制，当前的 NavigationServer 命令队列会被清空。这意味着所有已在"
+"当前物理帧中入队的命令都会被执行，即便这些命令与指定的地图无关，针对的是其他"
+"地图、地区、代理。消耗较大的导航网格以及地区连接的计算只会对指定的地图进行。"
+"其他地图会在该物理帧的末尾进行常规的同步。如果指定的地图在进行强制更新后又收"
+"到了修改，那么它也会在其他地图更新时受到更新。\n"
+"这个函数不会触及避障处理以及 [code]safe_velocity[/code] 信号的分发，这些还是"
+"会在该物理帧的末尾针对所有地图的代理进行处理。\n"
+"[b]注意：[/b]能力越大，责任越大。只有真正明白自己在干什么的用户才应该在真正有"
+"需要时使用这个函数。强制进行导航地图的立即更新需要对 NavigationServer 加锁并"
+"清空整个 NavigationServer 的命令队列。这样做不仅会大幅影响游戏的性能，如果使"
+"用不当、缺乏远见，还可能引入 bug。"
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid ""
@@ -45139,6 +45201,15 @@ msgid ""
 "(which should be avoided in general) the result might not be what is "
 "expected."
 msgstr ""
+"如果给出的世界空间坐标点 [code]point[/code] 目前由给出的导航地区 "
+"[code]region[/code] 拥有，则返回 [code]true[/code]。这里的“拥有”指的是该地区"
+"的导航网格多边形面中包含这个可能的位置，并且与给出的地区的导航地区上所有其他"
+"导航地区的导航网格相比，它与这个点的距离是最近的。\n"
+"如果有多个导航网格包含这个点并且距离相等，哪个导航地区的多边形先被处理，那个"
+"导航地区就获取所有权。多边形的处理顺序与导航地区在 NavigationServer 上的注册"
+"顺序一致。\n"
+"[b]注意：[/b]如果不同导航地区的导航网格存在重叠（通常应当避免），可能得到预料"
+"之外的结果。"
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the [code]enter_cost[/code] for this [code]region[/code]."
@@ -45405,6 +45476,10 @@ msgid ""
 "it will constantly overshoot or undershoot the distance to the next point on "
 "each physics frame update."
 msgstr ""
+"距离阈值，用于确定是否已到达某个路径点。使用这个值，代理就不必精确地到达某个"
+"路径点，到达某个区域内即可。如果这个值设得太大，该 NavigationAgent 将跳过路径"
+"上的点，可能导致其离开该导航网格。如果这个值设得太小，该 NavigationAgent 将陷"
+"入重新寻路的死循环，因为它在每次物理帧更新后都会超过或者到不了下一个点。"
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
@@ -45424,6 +45499,11 @@ msgid ""
 "bake [NavigationMesh] resources with a different [member NavigationMesh."
 "agent_radius] property and use different navigation maps for each actor size."
 msgstr ""
+"该避障代理的半径。这是该避障代理的“身体”，不是避障机制的起始半径（由 [member "
+"neighbor_dist] 控制）。\n"
+"不会影响正常的寻路。要修改角色的寻路半径，请在烘焙 [NavigationMesh] 资源时使"
+"用不同的 [member NavigationMesh.agent_radius] 属性，针对不同的角色大小使用不"
+"同的导航地图。"
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
@@ -45434,6 +45514,9 @@ msgid ""
 "overshoot or undershoot the distance to the final target point on each "
 "physics frame update."
 msgstr ""
+"距离阈值，用于确定是否已到达最终的目标点。使用这个值，代理就不必精确地到达最"
+"终的目标，到达该区域内即可。如果这个值设得太小，该 NavigationAgent 将陷入重新"
+"寻路的死循环，因为它在每次物理帧更新后都会超过或者到不了最终的目标点。"
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
@@ -45555,6 +45638,9 @@ msgid ""
 "[member neighbor_dist]).\n"
 "Does not affect normal pathfinding."
 msgstr ""
+"该避障代理的半径。这是该避障代理的“身体”，不是避障机制的起始半径（由 [member "
+"neighbor_dist] 控制）。\n"
+"不会影响正常的寻路。"
 
 #: doc/classes/NavigationMesh.xml
 msgid "A mesh to approximate the walkable areas and obstacles."
@@ -45694,11 +45780,11 @@ msgstr ""
 msgid ""
 "If the baking [AABB] has a volume the navigation mesh baking will be "
 "restricted to its enclosing area."
-msgstr ""
+msgstr "如果烘焙 [AABB] 存在体积，对该导航网格的烘焙会被限制在其内部区域中。"
 
 #: doc/classes/NavigationMesh.xml
 msgid "The position offset applied to the [member filter_baking_aabb] [AABB]."
-msgstr ""
+msgstr "应用于 [member filter_baking_aabb] [AABB] 的位置偏移量。"
 
 #: doc/classes/NavigationMesh.xml
 msgid "If [code]true[/code], marks spans that are ledges as non-walkable."
@@ -45871,7 +45957,6 @@ msgid "Helper class for creating and clearing navigation meshes."
 msgstr "对导航网格进行创建和清理的辅助类。"
 
 #: doc/classes/NavigationMeshGenerator.xml
-#, fuzzy
 msgid ""
 "This class is responsible for creating and clearing 3D navigation meshes "
 "used as [NavigationMesh] resources inside [NavigationMeshInstance]. The "
@@ -45931,7 +46016,11 @@ msgstr ""
 "象，通过在网格的包围区域周边创建体素世界，来检查原始几何体中适合 "
 "[NavigationMesh] 代理行走的地形。\n"
 "然后就会返回最终的导航网格，保存在 [NavigationMesh] 中，即可交付 "
-"[NavigationMeshInstance] 使用。"
+"[NavigationMeshInstance] 使用。\n"
+"[b]注意：[/b]使用网格来定义可行走区域并遮挡导航烘焙并不总能成功。烘焙导航处理"
+"网格原始几何体时，并没有几何体“位于内部”的概念，这是有意而为之的。根据当前烘"
+"焙参数的不同，只要遮挡网格足够大，大到能够将导航网格区域包含在其内部，烘焙时"
+"就会生成一个导航网格区域，位于遮挡的原始几何体网格内部。"
 
 #: doc/classes/NavigationMeshGenerator.xml
 msgid ""
@@ -48495,7 +48584,6 @@ msgstr ""
 "称设置为唯一名称。"
 
 #: doc/classes/Node.xml
-#, fuzzy
 msgid ""
 "Emitted when a child node enters the scene tree, either because it entered "
 "on its own or because this node entered with it.\n"
@@ -48503,7 +48591,9 @@ msgid ""
 "NOTIFICATION_ENTER_TREE] and [signal tree_entered]."
 msgstr ""
 "在子节点进入场景树时触发，可以是因为该子节点自行进入，也可以是因为本节点带着"
-"该子节点一起进入。"
+"该子节点一起进入。\n"
+"这个信号会在该子节点自身的 [constant NOTIFICATION_ENTER_TREE] 和 [signal "
+"tree_entered] [i]之后[/i]触发。"
 
 #: doc/classes/Node.xml
 msgid ""
@@ -48514,14 +48604,19 @@ msgid ""
 "tree and valid. This signal is emitted [i]after[/i] the child node's own "
 "[signal tree_exiting] and [constant NOTIFICATION_EXIT_TREE]."
 msgstr ""
+"在子节点即将退出场景树时触发，可以是因为该子节点自行退出，也可以是因为本节点"
+"带着该子节点一起退出。\n"
+"收到这个信号时，该子节 [code]node[/code] 仍在树中并且有效。这个信号会在该子节"
+"点自身的 [signal tree_exiting] 和 [constant NOTIFICATION_EXIT_TREE] [i]之后[/"
+"i]触发。"
 
 #: doc/classes/Node.xml
 msgid "Emitted when the node is ready."
-msgstr "当节点准备好时触发。"
+msgstr "当该节点准备好时触发。"
 
 #: doc/classes/Node.xml
 msgid "Emitted when the node is renamed."
-msgstr "在重命名节点时触发。"
+msgstr "当该节点被重命名时触发。"
 
 #: doc/classes/Node.xml
 msgid ""
@@ -48529,34 +48624,39 @@ msgid ""
 "This signal is emitted [i]after[/i] the related [constant "
 "NOTIFICATION_ENTER_TREE] notification."
 msgstr ""
+"当该节点进入树时触发。\n"
+"这个信号会在相关的 [constant NOTIFICATION_ENTER_TREE] 通知[i]之后[/i]触发。"
 
 #: doc/classes/Node.xml
 msgid "Emitted after the node exits the tree and is no longer active."
-msgstr "在节点退出树之后触发，并且不再处于活动状态。"
+msgstr "当该节点退出树之后触发，并且不再处于活动状态。"
 
 #: doc/classes/Node.xml
-#, fuzzy
 msgid ""
 "Emitted when the node is still active but about to exit the tree. This is "
 "the right place for de-initialization (or a \"destructor\", if you will).\n"
 "This signal is emitted [i]before[/i] the related [constant "
 "NOTIFICATION_EXIT_TREE] notification."
 msgstr ""
-"当节点仍处于活动状态但即将退出树时发出。这是反初始化的正确位置（如果愿意，也"
-"可以称之为“析构函数”）。"
+"当该节点仍处于活动状态但即将退出树时发出。这是反初始化的正确位置（如果愿意，"
+"也可以称之为“析构函数”）。\n"
+"这个信号会在相关的 [constant NOTIFICATION_EXIT_TREE] 通知[i]之前[/i]触发。"
 
 #: doc/classes/Node.xml
 msgid ""
 "Notification received when the node enters a [SceneTree].\n"
 "This notification is emitted [i]before[/i] the related [signal tree_entered]."
 msgstr ""
+"当该节点进入 [SceneTree] 时收到的通知。\n"
+"这个通知会在相关的 [signal tree_entered] [i]之前[/i]发出。"
 
 #: doc/classes/Node.xml
-#, fuzzy
 msgid ""
 "Notification received when the node is about to exit a [SceneTree].\n"
 "This notification is emitted [i]after[/i] the related [signal tree_exiting]."
-msgstr "当该节点即将退出 [SceneTree] 时收到的通知。"
+msgstr ""
+"当该节点即将退出 [SceneTree] 时收到的通知。\n"
+"这个通知会在相关的 [signal tree_exiting] [i]之后[/i]发出。"
 
 #: doc/classes/Node.xml
 msgid "Notification received when the node is moved in the parent."
@@ -50236,7 +50336,7 @@ msgid ""
 "code] with fixed y-coordinate value 0.0."
 msgstr ""
 "返回给定 x 坐标处的 1D 噪声值 [code][-1,1][/code]。\n"
-"[b]注意：[/b]这个方法实际上返回的是固定 Y 坐标值为 0.0 的二维噪声值 [code]"
+"[b]注意：[/b]这个方法实际上返回的是固定 Y 坐标值为 0.0 的 2D 噪声值 [code]"
 "[-1,1][/code]。"
 
 #: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
@@ -50802,7 +50902,6 @@ msgstr ""
 "径。"
 
 #: doc/classes/OS.xml
-#, fuzzy
 msgid ""
 "Returns the command-line arguments passed to the engine.\n"
 "Command-line arguments can be written in any form, including both [code]--"
@@ -50842,6 +50941,10 @@ msgstr ""
 "    if argument.find(\"=\") > -1:\n"
 "        var key_value = argument.split(\"=\")\n"
 "        arguments[key_value[0].lstrip(\"--\")] = key_value[1]\n"
+"    else:\n"
+"        # 将不带参数的选项加入该字典，\n"
+"        # 取值为空字符串。\n"
+"        arguments[argument.lstrip(\"--\")] = \"\"\n"
 "[/codeblock]"
 
 #: doc/classes/OS.xml
@@ -54032,11 +54135,11 @@ msgid ""
 "[b]Note:[/b] Many of these monitors are not updated in real-time, so there "
 "may be a short delay between changes."
 msgstr ""
-"这个类提供了对一些与性能有关的不同监控的访问，比如内存使用量、绘制调用和FPS。"
-"这些与编辑器的[b]Monitor[/b]标签中的[b]Debugger[/b]面板所显示的数值相同。通过"
-"使用这个类的[method get_monitor]方法，可以从你的代码中访问这些数据。\n"
+"这个类提供了对一些与性能有关的不同监控的访问，比如内存使用量、绘制调用和 "
+"FPS。这些与编辑器[b]调试器[/b]面板的[b]监视[/b]标签中的所显示的数值相同。通过"
+"使用这个类的 [method get_monitor] 方法，可以从你的代码中访问这些数据。\n"
 "[b]注意：[/b]这些监视器中有几个只在调试模式下可用，当在发布版构建中使用时，将"
-"总是返回0。\n"
+"总是返回 0。\n"
 "[b]注意：[/b]这些监控器中的许多不是实时更新的，所以在变化之间可能会有短暂的延"
 "迟。"
 
@@ -54114,7 +54217,7 @@ msgstr "孤儿节点的数量，孤儿节点即无法被按父级追溯到根节
 
 #: doc/classes/Performance.xml
 msgid "3D objects drawn per frame."
-msgstr "每帧绘制3D对象的数量。"
+msgstr "每帧绘制 3D 对象的数量。"
 
 #: doc/classes/Performance.xml
 msgid "Vertices drawn per frame. 3D only."
@@ -54270,30 +54373,30 @@ msgstr "对物体施加旋转冲量。"
 #: doc/classes/Physics2DDirectBodyState.xml
 #: doc/classes/PhysicsDirectBodyState.xml
 msgid "Returns the collider's [RID]."
-msgstr "返回碰撞体的[RID]。"
+msgstr "返回该碰撞体的 [RID]。"
 
 #: doc/classes/Physics2DDirectBodyState.xml
 #: doc/classes/PhysicsDirectBodyState.xml
 msgid "Returns the collider's object id."
-msgstr "返回碰撞体的对象 id。"
+msgstr "返回该碰撞体的对象 id。"
 
 #: doc/classes/Physics2DDirectBodyState.xml
 msgid ""
 "Returns the collider object. This depends on how it was created (will return "
 "a scene node if such was used to create it)."
 msgstr ""
-"返回碰撞体对象。这取决于它是如何创建的（如果是被作为场景节点创建的，那么将返"
-"回场景节点）。"
+"返回该碰撞体对象。这取决于它是如何创建的（如果是被作为场景节点创建的，那么将"
+"返回场景节点）。"
 
 #: doc/classes/Physics2DDirectBodyState.xml
 #: doc/classes/PhysicsDirectBodyState.xml
 msgid "Returns the contact position in the collider."
-msgstr "返回碰撞体中的接触位置。"
+msgstr "返回该碰撞体中的接触位置。"
 
 #: doc/classes/Physics2DDirectBodyState.xml
 #: doc/classes/PhysicsDirectBodyState.xml
 msgid "Returns the collider's shape index."
-msgstr "返回碰撞体的形状索引。"
+msgstr "返回该碰撞体的形状索引。"
 
 #: doc/classes/Physics2DDirectBodyState.xml
 msgid ""
@@ -54301,13 +54404,13 @@ msgid ""
 "[method Object.get_meta], and is set with [method Physics2DServer."
 "shape_set_data]."
 msgstr ""
-"返回碰撞形状的元数据。这个元数据不同于 [method Object.get_meta]，是用 "
+"返回该碰撞形状的元数据。这个元数据不同于 [method Object.get_meta]，是用 "
 "[method Physics2DServer.shape_set_data] 设置的。"
 
 #: doc/classes/Physics2DDirectBodyState.xml
 #: doc/classes/PhysicsDirectBodyState.xml
 msgid "Returns the linear velocity vector at the collider's contact point."
-msgstr "返回碰撞体接触点处的线速度向量。"
+msgstr "返回该碰撞体接触点处的线速度向量。"
 
 #: doc/classes/Physics2DDirectBodyState.xml
 msgid ""
@@ -54315,8 +54418,8 @@ msgid ""
 "[b]Note:[/b] By default, this returns 0 unless bodies are configured to "
 "monitor contacts. See [member RigidBody2D.contact_monitor]."
 msgstr ""
-"返回此物体与其他物体的接触次数。\n"
-"[b]注意：[/b]默认情况下，除非物体被设为监视接触者，否则返回0。参阅 [member "
+"返回这个物体与其他物体的接触次数。\n"
+"[b]注意：[/b]默认情况下，除非物体被设为监视接触者，否则返回 0。见 [member "
 "RigidBody2D.contact_monitor]。"
 
 #: doc/classes/Physics2DDirectBodyState.xml
@@ -54616,7 +54719,7 @@ msgstr ""
 "通过 [Physics2DShapeQueryParameters] 对象检查给出的形状与空间的交点。返回的相"
 "交形状是一个字典数组，包含以下字段：\n"
 "[code]collider[/code]：碰撞的对象。\n"
-"[code]collider_id[/code]：碰撞对象的ID。\n"
+"[code]collider_id[/code]：碰撞对象的 ID。\n"
 "[code]metadata[/code]：相交形状的元数据。这个元数据与 [method Object."
 "get_meta] 不同，是用 [method Physics2DServer.shape_set_data] 设置的。\n"
 "[code]rid[/code]：相交对象的 [RID]。\n"
@@ -54725,13 +54828,13 @@ msgid ""
 "5: The shape index of the area where the object entered/exited."
 msgstr ""
 "设置当任何主体/区域进入或退出该区域时调用的函数。这个回调函数将被任何与区域交"
-"互的对象调用，并接受5个参数:\n"
-"1: [constant AREA_BODY_ADDED]或[constant AREA_BODY_REMOVED]，取决于对象是否进"
-"入或退出该区域。\n"
-"2:进入/退出该区域对象的[RID]。\n"
-"3:进入/退出该区域对象的实例ID。\n"
-"4:进入/离开该区域的物体的形状指数。\n"
-"5:物体进入/离开区域的形状指数。"
+"互的对象调用，并接受 5 个参数：\n"
+"1：[constant AREA_BODY_ADDED] 或 [constant AREA_BODY_REMOVED]，取决于对象是否"
+"进入或退出该区域。\n"
+"2：进入/退出该区域对象的 [RID]。\n"
+"3：进入/退出该区域对象的实例 ID。\n"
+"4：进入/离开该区域的物体的形状指数。\n"
+"5：物体进入/离开区域的形状指数。"
 
 #: doc/classes/Physics2DServer.xml
 msgid ""
@@ -54847,7 +54950,7 @@ msgstr "返回物体参数的值。请参阅 [enum BodyParameter] 获取可用�
 
 #: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
 msgid "Returns the [RID] of the nth shape of a body."
-msgstr "返回 body 的第 n 个碰撞形状的 [RID]。"
+msgstr "返回物体的第 n 个碰撞形状的 [RID]。"
 
 #: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
 msgid "Returns the number of shapes assigned to a body."
@@ -54874,7 +54977,7 @@ msgid ""
 "Returns whether a body uses a callback function to calculate its own physics "
 "(see [method body_set_force_integration_callback])."
 msgstr ""
-"返回一个 body 是否使用回调函数来计算它自己的物理值（见 [method "
+"返回一个物体是否使用回调函数来计算它自己的物理值（见 [method "
 "body_set_force_integration_callback]）。"
 
 #: doc/classes/Physics2DServer.xml
@@ -55059,7 +55162,7 @@ msgstr "返回一个关节的类型（见 [enum JointType]）。"
 msgid ""
 "Sets a joint parameter. See [enum JointParam] for a list of available "
 "parameters."
-msgstr "设置关节参数。有关可用参数的列表，请参阅[enum JointParam]。"
+msgstr "设置关节参数。有关可用参数的列表，请参阅 [enum JointParam]。"
 
 #: doc/classes/Physics2DServer.xml
 msgid ""
@@ -55188,8 +55291,8 @@ msgid ""
 "violating a constraint, to avoid leaving them in that state because of "
 "numerical imprecision."
 msgstr ""
-"常量，用于设置/获取所有物理约束的默认求解器偏置。解算器偏差是一个控制两个物体"
-"在违反约束后 \"反弹 \"程度的因素，以避免由于数值不精确而使它们处于这种状态。"
+"常量，用于设置/获取所有物理约束的默认求解器偏置。解算器偏置是一个控制两个物体"
+"在违反约束后“反弹”程度的因素，以避免由于数值不精确而使它们处于这种状态。"
 
 #: doc/classes/Physics2DServer.xml
 msgid ""
@@ -55241,8 +55344,8 @@ msgid ""
 "supplied form is a convex polygon."
 msgstr ""
 "这是用于创建凸多边形的常量。一个多边形是由一个点的列表定义的。它可以用于交点"
-"和内/外侧检查。与[member CollisionPolygon2D.polygon]属性不同，用[method "
-"shape_set_data]修改的多边形并不验证所提供的点的形式是一个凸形多边形。"
+"和内/外侧检查。与 [member CollisionPolygon2D.polygon] 属性不同，用 [method "
+"shape_set_data] 修改的多边形并不验证所提供的点的形式是一个凸形多边形。"
 
 #: doc/classes/Physics2DServer.xml
 msgid ""
@@ -55344,15 +55447,15 @@ msgstr ""
 
 #: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
 msgid "Constant for static bodies."
-msgstr "StaticBody 的常量。"
+msgstr "静态物体的常量。"
 
 #: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
 msgid "Constant for kinematic bodies."
-msgstr "KinematicBody 的常量。"
+msgstr "运动学物体的常量。"
 
 #: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
 msgid "Constant for rigid bodies."
-msgstr "RigidBody 的常量。"
+msgstr "刚体的常量。"
 
 #: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
 msgid ""
@@ -55444,8 +55547,8 @@ msgid ""
 "undamped spring, while 1 causes the system to reach equilibrium as fast as "
 "possible (critical damping)."
 msgstr ""
-"设置弹簧接头的阻尼比率。值为0表示无阻尼弹簧，而1导致系统尽可能快地达到平衡"
-"（临界阻尼）。"
+"设置弹簧接头的阻尼比率。值为 0 表示无阻尼弹簧，而 1 导致系统尽可能快地达到平"
+"衡（临界阻尼）。"
 
 #: doc/classes/Physics2DServer.xml
 msgid ""
@@ -55459,13 +55562,13 @@ msgstr ""
 msgid ""
 "Enables continuous collision detection by raycasting. It is faster than "
 "shapecasting, but less precise."
-msgstr "通过射线投射实现连续的碰撞检测。它比 shapecasting 更快，但不够精确。"
+msgstr "通过射线投射实现连续的碰撞检测。它比形状投射更快，但不够精确。"
 
 #: doc/classes/Physics2DServer.xml
 msgid ""
 "Enables continuous collision detection by shapecasting. It is the slowest "
 "CCD method, and the most precise."
-msgstr "通过形变实现连续的碰撞检测。它是最慢的CCD方法，也是最精确的。"
+msgstr "通过形变实现连续的碰撞检测。它是最慢的 CCD 方法，也是最精确的。"
 
 #: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
 msgid ""
@@ -55665,7 +55768,7 @@ msgid ""
 "monitor contacts. See [member RigidBody.contact_monitor]."
 msgstr ""
 "返回此物体与其他物体的接触次数。\n"
-"[b]注意：[/b]默认情况下，除非物体被设为监视接触者，否则返回0。参阅 [member "
+"[b]注意：[/b]默认情况下，除非物体被设为监视接触者，否则返回 0。见 [member "
 "RigidBody2D.contact_monitor]。"
 
 #: doc/classes/PhysicsDirectBodyState.xml
@@ -55745,15 +55848,15 @@ msgid ""
 "If the shape did not intersect anything, then an empty dictionary is "
 "returned instead."
 msgstr ""
-"检查通过[PhysicsShapeQueryParameters]对象给出的形状与空间的交点。如果它与一个"
-"以上的形状发生碰撞，则选择最近的。返回的对象是包含以下字段的字典:\n"
-"[code]collider_id[/code]:碰撞对象的ID。\n"
-"[code]linear_velocity[/code]:碰撞对象的速度[Vector3]。如果对象是一个[Area]，"
-"结果是[code](0, 0, 0)[/code]。\n"
-"[code]normal[/code]:物体在交点处的表面法线。\n"
-"[code]点[/code]:相交点。\n"
-"[code]rid[/code]:相交物体的[RID]。\n"
-"[code]shape[/code]:碰撞形状的形状索引。\n"
+"检查通过 [PhysicsShapeQueryParameters] 对象给出的形状与空间的交点。如果它与一"
+"个以上的形状发生碰撞，则选择最近的。返回的对象是包含以下字段的字典：\n"
+"[code]collider_id[/code]：碰撞对象的 ID。\n"
+"[code]linear_velocity[/code]：碰撞对象的速度 [Vector3]。如果对象是一个 "
+"[Area]，结果是 [code](0, 0, 0)[/code]。\n"
+"[code]normal[/code]：物体在交点处的表面法线。\n"
+"[code]point[/code]：相交点。\n"
+"[code]rid[/code]：相交物体的 [RID]。\n"
+"[code]shape[/code]：碰撞形状的形状索引。\n"
 "如果该形状没有与任何物体相交，那么将返回空的字典。"
 
 #: doc/classes/PhysicsDirectSpaceState.xml
@@ -55802,17 +55905,17 @@ msgid ""
 "determine if the ray should collide with [PhysicsBody]s or [Area]s, "
 "respectively."
 msgstr ""
-"在给定的空间中与一条射线相交。返回的对象是具有下列字段的字典:\n"
-"[code]collider[/code]:碰撞的对象。\n"
-"[code]collider_id[/code]:碰撞对象的ID。\n"
-"[code]normal[/code]:物体在相交点的表面法线。\n"
-"[code]position[/code]:交叉点。\n"
-"[code]rid[/code]:相交物体的[RID]。\n"
-"[code]形状[/code]:碰撞形状的形状索引。\n"
+"在给定的空间中与一条射线相交。返回的对象是具有下列字段的字典：\n"
+"[code]collider[/code]：碰撞的对象。\n"
+"[code]collider_id[/code]：碰撞对象的 ID。\n"
+"[code]normal[/code]：物体在相交点的表面法线。\n"
+"[code]position[/code]：交叉点。\n"
+"[code]rid[/code]：相交物体的 [RID]。\n"
+"[code]shape[/code]：碰撞形状的形状索引。\n"
 "如果射线没有与任何物体相交，那么将返回空的字典。\n"
-"此外，该方法可以接受一个[code]exclude[/code]对象或[RID]数组，该数组将被排除在"
-"碰撞之外，[code]collision_mask[/code]位掩码表示要检查的物理层，或者布尔值来确"
-"定射线是否应该分别与[PhysicsBody]或[Area]发生碰撞。"
+"此外，该方法可以接受一个 [code]exclude[/code] 对象或 [RID] 数组，该数组将被排"
+"除在碰撞之外，[code]collision_mask[/code] 位掩码表示要检查的物理层，或者布尔"
+"值来确定射线是否应该分别与 [PhysicsBody] 或 [Area] 发生碰撞。"
 
 #: doc/classes/PhysicsDirectSpaceState.xml
 msgid ""
@@ -55827,13 +55930,13 @@ msgid ""
 "The number of intersections can be limited with the [code]max_results[/code] "
 "parameter, to reduce the processing time."
 msgstr ""
-"通过[PhysicsShapeQueryParameters]对象给出的形状与空间检查交点。相交的形状会以"
-"数组的形式返回，该数组包含有以下字段的字典:\n"
-"[code]collider[/code]:碰撞的对象。\n"
-"[code]collider_id[/code]:碰撞对象的ID。\n"
-"[code]rid[/code]:相交物体的[RID]。\n"
-"[code]shape[/code]:碰撞形状的形状索引。\n"
-"可以用[code]max_results[/code]参数限制相交的数量，以减少处理时间。"
+"通过 [PhysicsShapeQueryParameters] 对象给出的形状与空间检查交点。相交的形状会"
+"以数组的形式返回，该数组包含有以下字段的字典：\n"
+"[code]collider[/code]：碰撞的对象。\n"
+"[code]collider_id[/code]：碰撞对象的 ID。\n"
+"[code]rid[/code]：相交物体的 [RID]。\n"
+"[code]shape[/code]：碰撞形状的形状索引。\n"
+"可以用 [code]max_results[/code] 参数限制相交的数量，以减少处理时间。"
 
 #: doc/classes/PhysicsMaterial.xml
 msgid "A material for physics properties."
@@ -55842,7 +55945,7 @@ msgstr "具有物理属性的材质。"
 #: doc/classes/PhysicsMaterial.xml
 msgid ""
 "Provides a means of modifying the collision properties of a [PhysicsBody]."
-msgstr "提供了一种修改[PhysicsBody]的碰撞属性的方法。"
+msgstr "提供了一种修改 [PhysicsBody] 的碰撞属性的方法。"
 
 #: doc/classes/PhysicsMaterial.xml
 msgid ""
@@ -55856,14 +55959,16 @@ msgid ""
 "The body's bounciness. Values range from [code]0[/code] (no bounce) to "
 "[code]1[/code] (full bounciness)."
 msgstr ""
-"实体的弹性。值的范围从[code]0[/code]（无反弹）到[code]1[/code]（完全反弹）。"
+"实体的弹性。值的范围从 [code]0[/code]（无反弹）到 [code]1[/code]（完全反"
+"弹）。"
 
 #: doc/classes/PhysicsMaterial.xml
 msgid ""
 "The body's friction. Values range from [code]0[/code] (frictionless) to "
 "[code]1[/code] (maximum friction)."
 msgstr ""
-"物体的摩擦。取值范围从[code]0[/code]（无摩擦）到[code]1[/code]（最大摩擦）。"
+"物体的摩擦。取值范围从 [code]0[/code]（无摩擦）到 [code]1[/code]（最大摩"
+"擦）。"
 
 #: doc/classes/PhysicsMaterial.xml
 msgid ""
@@ -55891,7 +55996,7 @@ msgstr ""
 
 #: doc/classes/PhysicsServer.xml
 msgid "Creates an [Area]."
-msgstr "创建一个[Area]区域。"
+msgstr "创建一个 [Area] 区域。"
 
 #: doc/classes/PhysicsServer.xml
 msgid ""
@@ -55936,7 +56041,7 @@ msgid ""
 "BodyMode] constants, for the type of body created. Additionally, the body "
 "can be created in sleeping state to save processing time."
 msgstr ""
-"创建物理体。对于创建的物体类型，第一个参数可以是[enum BodyMode]常量中的任何"
+"创建物理体。对于创建的物体类型，第一个参数可以是 [enum BodyMode] 常量中的任何"
 "值。此外，物体可以在休眠状态下创建，以节省处理时间。"
 
 #: doc/classes/PhysicsServer.xml
@@ -55951,7 +56056,7 @@ msgstr ""
 msgid ""
 "Returns the value of a body parameter. A list of available parameters is on "
 "the [enum BodyParameter] constants."
-msgstr "返回物体参数的值。可用参数列表位于[enum BodyParameter]常量上。"
+msgstr "返回物体参数的值。可用参数列表位于 [enum BodyParameter] 常量上。"
 
 #: doc/classes/PhysicsServer.xml
 msgid ""
@@ -55982,7 +56087,7 @@ msgstr ""
 
 #: doc/classes/PhysicsServer.xml
 msgid "Sets the body mode, from one of the [enum BodyMode] constants."
-msgstr "从[enum BodyMode]常量之一设置主体模式。"
+msgstr "从 [enum BodyMode] 常量之一设置主体模式。"
 
 #: doc/classes/PhysicsServer.xml
 msgid ""
@@ -55992,7 +56097,7 @@ msgstr "设置物体参数。可用参数列表位于 [enum BodyParameter] 常�
 
 #: doc/classes/PhysicsServer.xml
 msgid "Sets the body pickable with rays if [code]enabled[/code] is set."
-msgstr "如果设置了[code]enabled[/code]，则设置可使用光线拾取的物体。"
+msgstr "如果设置了 [code]enabled[/code]，则设置可使用光线拾取的物体。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "Sets a body state (see [enum BodyState] constants)."
@@ -56108,12 +56213,12 @@ msgstr "设置关节的优先级值。"
 #: doc/classes/PhysicsServer.xml
 msgid ""
 "Returns position of the joint in the local space of body a of the joint."
-msgstr "返回关节在关节物体A的局部空间中的位置。"
+msgstr "返回关节在关节物体 A 的局部空间中的位置。"
 
 #: doc/classes/PhysicsServer.xml
 msgid ""
 "Returns position of the joint in the local space of body b of the joint."
-msgstr "返回关节在关节物体B的局部空间中的位置。"
+msgstr "返回关节在关节物体 B 的局部空间中的位置。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "Gets a pin_joint parameter (see [enum PinJointParam] constants)."
@@ -56121,11 +56226,11 @@ msgstr "获取 pin_joint 参数（见 [enum PinJointParam] 常量）。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "Sets position of the joint in the local space of body a of the joint."
-msgstr "设置关节在关节物体A的局部空间中的位置。"
+msgstr "设置关节在关节物体 A 的局部空间中的位置。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "Sets position of the joint in the local space of body b of the joint."
-msgstr "设置关节在关节物体B的局部空间中的位置。"
+msgstr "设置关节在关节物体 B 的局部空间中的位置。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "Sets a pin_joint parameter (see [enum PinJointParam] constants)."
@@ -56133,7 +56238,7 @@ msgstr "设置 pin_joint 参数（见 [enum PinJointParam] 常量）。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "Activates or deactivates the 3D physics engine."
-msgstr "激活或停用3D物理引擎。"
+msgstr "激活或停用 3D 物理引擎。"
 
 #: doc/classes/PhysicsServer.xml
 msgid ""
@@ -56155,8 +56260,8 @@ msgid ""
 "body or an area. To do so, you must use [method area_set_shape] or [method "
 "body_set_shape]."
 msgstr ""
-"创建一个[enum ShapeType]类型的形状。不把它分配给一个体或一个区域。要做到这一"
-"点，你必须使用[method area_set_shape]或[method body_set_shape]。"
+"创建一个 [enum ShapeType] 类型的形状。不把它分配给一个体或一个区域。要做到这"
+"一点，你必须使用 [method area_set_shape] 或 [method body_set_shape]。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "Returns the type of shape (see [enum ShapeType] constants)."
@@ -56177,7 +56282,7 @@ msgstr ""
 msgid ""
 "Sets the value for a space parameter. A list of available parameters is on "
 "the [enum SpaceParameter] constants."
-msgstr "设置空间参数的值。可用参数列表位于[enum SpaceParameter]常量上。"
+msgstr "设置空间参数的值。可用参数列表位于 [enum SpaceParameter] 常量上。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "The [Joint] is a [PinJoint]."
@@ -56221,7 +56326,7 @@ msgstr ""
 msgid ""
 "If above 0, this value is the maximum value for an impulse that this Joint "
 "puts on its ends."
-msgstr "如果大于0，这个值就是这个关节对其两端施加的冲量的最大值。"
+msgstr "如果大于 0，这个值就是这个关节对其两端施加的冲量的最大值。"
 
 #: doc/classes/PhysicsServer.xml
 msgid "The maximum rotation across the Hinge."
@@ -56474,7 +56579,7 @@ msgid ""
 "Pin joint for 3D rigid bodies. It pins 2 bodies (rigid or static) together. "
 "See also [Generic6DOFJoint]."
 msgstr ""
-"3D刚体的钉关节。它将两个物体（刚体或静态体）钉在一起。参阅"
+"3D 刚体的钉关节。它将两个物体（刚体或静态体）钉在一起。另请参阅 "
 "[Generic6DOFJoint]。"
 
 #: doc/classes/PinJoint.xml
@@ -56493,7 +56598,7 @@ msgstr "被钉在一起的物体之间保持共速的力。越高，力越大。
 msgid ""
 "If above 0, this value is the maximum value for an impulse that this Joint "
 "produces."
-msgstr "如果大于0，这个值就是此关节产生的冲量的最大值。"
+msgstr "如果大于 0，这个值就是此关节产生的冲量的最大值。"
 
 #: doc/classes/PinJoint2D.xml
 msgid "Pin Joint for 2D shapes."
@@ -56551,7 +56656,7 @@ msgstr "返回平面的中心。"
 msgid ""
 "Returns the shortest distance from the plane to the position [code]point[/"
 "code]."
-msgstr "返回从平面到位置[code]point[/code]的最短距离。"
+msgstr "返回从平面到位置 [code]point[/code] 的最短距离。"
 
 #: doc/classes/Plane.xml
 msgid ""
@@ -56608,7 +56713,7 @@ msgstr ""
 #: doc/classes/Plane.xml
 msgid ""
 "Returns [code]true[/code] if [code]point[/code] is located above the plane."
-msgstr "如果[code]point[/code]位于平面上方，则返回 [code]true[/code]。"
+msgstr "如果 [code]point[/code] 位于平面上方，则返回 [code]true[/code]。"
 
 #: doc/classes/Plane.xml
 msgid "Returns a copy of the plane, normalized."
@@ -56618,7 +56723,7 @@ msgstr "返回平面的一个标准化副本。"
 msgid ""
 "Returns the orthogonal projection of [code]point[/code] into a point in the "
 "plane."
-msgstr "返回 [code]点[/code]在平面上的正交投影。"
+msgstr "返回 [code]point[/code] 在平面上的正交投影。"
 
 #: doc/classes/Plane.xml
 msgid ""
@@ -56628,9 +56733,9 @@ msgid ""
 "[code]d[/code], while the [code](a, b, c)[/code] coordinates are represented "
 "by the [member normal] property."
 msgstr ""
-"从原点到平面的距离，沿[member normal]方向。这个值通常是非负的。\n"
-"在平面[code]ax + by + cz = d[/code]的标量方程中，这是[code]d[/code]，而[code]"
-"(a, b, c)[/code]坐标由[member normal]属性表示。"
+"从原点到平面的距离，沿 [member normal] 方向。这个值通常是非负的。\n"
+"在平面 [code]ax + by + cz = d[/code] 的标量方程中，这是 [code]d[/code]，而 "
+"[code](a, b, c)[/code] 坐标由 [member normal] 属性表示。"
 
 #: doc/classes/Plane.xml
 msgid ""
@@ -56640,8 +56745,8 @@ msgid ""
 "property."
 msgstr ""
 "平面的法线，必须归一化。\n"
-"在平面[code]ax + by + cz = d[/code]的标量方程中，这是向量[code](a, b, c)[/"
-"code]，其中[code]d[/code]是[member d]属性。"
+"在平面 [code]ax + by + cz = d[/code] 的标量方程中，这是向量 [code](a, b, c)[/"
+"code]，其中 [code]d[/code] 是 [member d] 属性。"
 
 #: doc/classes/Plane.xml
 msgid "The X component of the plane's [member normal] vector."
@@ -56850,12 +56955,12 @@ msgid ""
 "If [code]true[/code], polygon will be inverted, containing the area outside "
 "the defined points and extending to the [code]invert_border[/code]."
 msgstr ""
-"如果为 [code]true[/code],则多边形将反转,包含定义点之外的区域,并扩展到"
-"[code]invert_border[/code](反转边界)."
+"如果为 [code]true[/code]，则多边形将反转，包含定义点之外的区域，并扩展到 "
+"[code]invert_border[/code]（反转边界）。"
 
 #: doc/classes/Polygon2D.xml
 msgid "The offset applied to each vertex."
-msgstr "应用于每个顶点的位置偏移量."
+msgstr "应用于每个顶点的位置偏移量。"
 
 #: doc/classes/Polygon2D.xml
 msgid ""
@@ -56965,11 +57070,12 @@ msgstr ""
 msgid ""
 "Constructs a new [PoolByteArray]. Optionally, you can pass in a generic "
 "[Array] that will be converted."
-msgstr "构建新的[PoolByteArray]。你可以选择传入一个通用的[Array]，它将被转换。"
+msgstr ""
+"构建新的 [PoolByteArray]。你可以选择传入一个通用的 [Array]，它将被转换。"
 
 #: doc/classes/PoolByteArray.xml
 msgid "Appends a [PoolByteArray] at the end of this array."
-msgstr "在这个数组的最后添加[PoolByteArray]。"
+msgstr "在这个数组的最后添加 [PoolByteArray]。"
 
 #: doc/classes/PoolByteArray.xml
 msgid ""
@@ -57114,6 +57220,14 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr "改变给定索引处的字节。"
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+#, fuzzy
+msgid "Sorts the elements of the array in ascending order."
+msgstr "从数组中删除位于索引的元素。"
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -57176,11 +57290,11 @@ msgid ""
 "Constructs a new [PoolColorArray]. Optionally, you can pass in a generic "
 "[Array] that will be converted."
 msgstr ""
-"构建新的[PoolColorArray]。你可以选择传入一个通用的[Array]，它将被转换。"
+"构建新的 [PoolColorArray]。你可以选择传入一个通用的 [Array]，它将被转换。"
 
 #: doc/classes/PoolColorArray.xml
 msgid "Appends a [PoolColorArray] at the end of this array."
-msgstr "在这个数组的最后添加一个[PoolColorArray]。"
+msgstr "在这个数组的最后添加一个 [PoolColorArray]。"
 
 #: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
 msgid "Appends a value to the array."
@@ -57260,18 +57374,19 @@ msgstr ""
 msgid ""
 "Constructs a new [PoolIntArray]. Optionally, you can pass in a generic "
 "[Array] that will be converted."
-msgstr "构建新的[PoolIntArray]。你可以选择传入一个通用的[Array]，它将被转换。"
+msgstr ""
+"构建新的 [PoolIntArray]。你可以选择传入一个通用的 [Array]，它将被转换。"
 
 #: doc/classes/PoolIntArray.xml
 msgid "Appends a [PoolIntArray] at the end of this array."
-msgstr "在这个数组的最后添加[PoolIntArray]。"
+msgstr "在这个数组的最后添加 [PoolIntArray]。"
 
 #: doc/classes/PoolIntArray.xml
 msgid ""
 "Inserts a new int at a given position in the array. The position must be "
 "valid, or at the end of the array ([code]idx == size()[/code])."
 msgstr ""
-"在数组中的指定位置插入一个新的int。这个位置必须是有效的，或者在数组的末端"
+"在数组中的指定位置插入一个新的 int。这个位置必须是有效的，或者在数组的末端"
 "（[code]idx == size()[/code]）。"
 
 #: doc/classes/PoolIntArray.xml
@@ -57402,11 +57517,11 @@ msgid ""
 "Constructs a new [PoolStringArray]. Optionally, you can pass in a generic "
 "[Array] that will be converted."
 msgstr ""
-"构建新的[PoolStringArray]。你可以选择传入一个通用的[Array]，它将被转换。"
+"构建新的 [PoolStringArray]。你可以选择传入一个通用的 [Array]，它将被转换。"
 
 #: doc/classes/PoolStringArray.xml
 msgid "Appends a [PoolStringArray] at the end of this array."
-msgstr "在这个数组的最后添加[PoolStringArray]。"
+msgstr "在这个数组的最后添加 [PoolStringArray]。"
 
 #: doc/classes/PoolStringArray.xml
 msgid ""
@@ -57481,15 +57596,15 @@ msgid ""
 "Constructs a new [PoolVector2Array]. Optionally, you can pass in a generic "
 "[Array] that will be converted."
 msgstr ""
-"构建新的[PoolVector2Array]。你可以选择传入一个通用的[Array]，它将被转换。"
+"构建新的 [PoolVector2Array]。你可以选择传入一个通用的 [Array]，它将被转换。"
 
 #: doc/classes/PoolVector2Array.xml
 msgid "Appends a [PoolVector2Array] at the end of this array."
-msgstr "在这个数组的最后添加[PoolVector2Array]。"
+msgstr "在这个数组的最后添加 [PoolVector2Array]。"
 
 #: doc/classes/PoolVector2Array.xml
 msgid "Inserts a [Vector2] at the end."
-msgstr "在末尾插入[Vector2]。"
+msgstr "在末尾插入一个 [Vector2]。"
 
 #: doc/classes/PoolVector2Array.xml
 msgid "Changes the [Vector2] at the given index."
@@ -57548,15 +57663,15 @@ msgid ""
 "Constructs a new [PoolVector3Array]. Optionally, you can pass in a generic "
 "[Array] that will be converted."
 msgstr ""
-"构建新的[PoolVector3Array]。你可以选择传入一个通用的[Array]，它将被转换。"
+"构建新的 [PoolVector3Array]。你可以选择传入一个通用的 [Array]，它将被转换。"
 
 #: doc/classes/PoolVector3Array.xml
 msgid "Appends a [PoolVector3Array] at the end of this array."
-msgstr "在这个数组的最后添加[PoolVector3Array]。"
+msgstr "在这个数组的最后添加 [PoolVector3Array]。"
 
 #: doc/classes/PoolVector3Array.xml
 msgid "Inserts a [Vector3] at the end."
-msgstr "在末尾插入[Vector3]。"
+msgstr "在末尾插入一个 [Vector3]。"
 
 #: doc/classes/PoolVector3Array.xml
 msgid "Changes the [Vector3] at the given index."
@@ -57670,11 +57785,11 @@ msgstr "PopupDialog 是弹出对话框的基类，与 [WindowDialog] 一起。"
 
 #: doc/classes/PopupDialog.xml
 msgid "Sets a custom [StyleBox] for the panel of the [PopupDialog]."
-msgstr "为[PopupDialog]的面板设置自定义的[StyleBox]。"
+msgstr "为 [PopupDialog] 的面板设置自定义的 [StyleBox]。"
 
 #: doc/classes/PopupMenu.xml
 msgid "PopupMenu displays a list of options."
-msgstr "PopupMenu(弹出菜单)显示选项列表."
+msgstr "PopupMenu 会显示一个选项列表。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57692,6 +57807,14 @@ msgid ""
 "keystroke was registered. You can adjust the timeout duration by changing "
 "[member ProjectSettings.gui/timers/incremental_search_max_interval_msec]."
 msgstr ""
+"[PopupMenu] 是会显示一个选项列表的 [Control]。常见于工具栏和上下文菜单中。\n"
+"[b]增量搜索：[/b]与 [ItemList] 和 [Tree] 类似，[PopupMenu] 也支持在聚焦控件时"
+"在列表中进行搜索。按下与某个条目名称首字母一致的按键，就会选中以该字母开头的"
+"第一个条目。在此之后，进行增量搜索的办法有两种：1）在超时前再次按下同一个按"
+"键，选中以该字母开头的下一个条目。2）在超时前按下剩余字母对应的按键，直接匹配"
+"并选中所需的条目。这两个动作都会在最后一次按键超时后重置回列表顶端。你可以通"
+"过 [member ProjectSettings.gui/timers/incremental_search_max_interval_msec] "
+"修改超时时长。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57724,12 +57847,13 @@ msgid ""
 "built-in checking behavior and must be checked/unchecked manually. See "
 "[method set_item_checked] for more info on how to control it."
 msgstr ""
-"添加一个新的可检查项目,并将指定的[ShortCut]分配给它.将复选框的标签设置为"
-"ShortCut的名称.\n"
-"可以选择提供一个[code]id[/code].如果没有提供[code]id[/code],将从索引中创建一"
-"个.\n"
-"[b]注意：[/b]可检查项目只是显示一个检查标记,但没有任何内置的检查行为,必须手动"
-"检查或取消检查. 参阅 [method set_item_checked]了解更多关于如何控制它的信息."
+"添加一个新的可检查项目,并将指定的 [ShortCut] 分配给它。将复选框的标签设置为 "
+"ShortCut 的名称。\n"
+"可以选择提供一个 [code]id[/code]。如果没有提供 [code]id[/code]，将从索引中创"
+"建一个。\n"
+"[b]注意：[/b]可检查项目只是显示一个检查标记，但没有任何内置的检查行为，必须手"
+"动检查或取消检查。参阅 [method set_item_checked] 了解更多关于如何控制它的信"
+"息。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57744,14 +57868,14 @@ msgid ""
 "built-in checking behavior and must be checked/unchecked manually. See "
 "[method set_item_checked] for more info on how to control it."
 msgstr ""
-"添加一个新的可检查项目，带有文本[code]label[/code]和图标[code]texture[/"
+"添加一个新的可检查项目，带有文本 [code]label[/code] 和图标 [code]texture[/"
 "code]。\n"
-"可以选择提供一个[code]id[/code]，以及一个加速器（[code]accel[/code]）。如果没"
-"有提供[code]id[/code]，将从索引中创建一个。如果没有提供[code]accel[/code]，那"
-"么默认的[code]0[/code]将被分配给它。参阅[method get_item_accelerator]获取更多"
-"关于加速器的信息。\n"
+"可以选择提供一个 [code]id[/code]，以及一个加速器（[code]accel[/code]）。如果"
+"没有提供 [code]id[/code]，将从索引中创建一个。如果没有提供 [code]accel[/"
+"code]，那么默认的 [code]0[/code] 将被分配给它。参阅 [method "
+"get_item_accelerator] 获取更多关于加速器的信息。\n"
 "[b]注意：[/b]可选项目只是显示一个复选标记，但没有任何内置的检查行为，必须手动"
-"检查/取消检查。参阅[method set_item_checked]获取更多关于如何控制它的信息。"
+"检查/取消检查。参阅 [method set_item_checked] 获取更多关于如何控制它的信息。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57764,12 +57888,12 @@ msgid ""
 "built-in checking behavior and must be checked/unchecked manually. See "
 "[method set_item_checked] for more info on how to control it."
 msgstr ""
-"添加一个新的可选项目，并为其分配指定的[ShortCut]和图标[code]texture[/code]。"
-"将复选框的标签设置为[ShortCut]的名称。\n"
-"可以选择提供一个[code]id[/code]。如果没有提供[code]id[/code]，将从索引中创建"
-"一个。\n"
+"添加一个新的可选项目，并为其分配指定的 [ShortCut] 和图标 [code]texture[/"
+"code]。将复选框的标签设置为 [ShortCut] 的名称。\n"
+"可以选择提供一个 [code]id[/code]。如果没有提供 [code]id[/code]，将从索引中创"
+"建一个。\n"
 "[b]注意：[/b]可选项目只是显示一个复选标记，但没有任何内置的检查行为，必须手动"
-"检查/取消检查。参阅[method set_item_checked]获取更多关于如何控制它的信息。"
+"检查/取消检查。参阅 [method set_item_checked] 获取更多关于如何控制它的信息。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57788,12 +57912,12 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 msgid "Same as [method add_icon_check_item], but uses a radio check button."
-msgstr "与[method add_icon_check_item]相同，但使用单选按钮。"
+msgstr "与 [method add_icon_check_item] 相同，但使用单选按钮。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
 "Same as [method add_icon_check_shortcut], but uses a radio check button."
-msgstr "与[method add_icon_check_shortcut]相同，但使用一个单选按钮。"
+msgstr "与 [method add_icon_check_shortcut] 相同，但使用一个单选按钮。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57802,9 +57926,9 @@ msgid ""
 "An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
 "provided, one will be created from the index."
 msgstr ""
-"添加一个新项，并分配指定的[ShortCut]和图标[code]texture[/code]给它。将复选框"
-"的标签设置为[ShortCut]的名称。\n"
-"可以选择提供[code]id[/code]。如果没有提供[code]id[/code]，将从索引中创建一"
+"添加一个新项，并分配指定的 [ShortCut] 和图标 [code]texture[/code] 给它。将复"
+"选框的标签设置为 [ShortCut] 的名称。\n"
+"可以选择提供 [code]id[/code]。如果没有提供 [code]id[/code]，将从索引中创建一"
 "个。"
 
 #: doc/classes/PopupMenu.xml
@@ -57889,9 +58013,9 @@ msgid ""
 "A [code]label[/code] can optionally be provided, which will appear at the "
 "center of the separator."
 msgstr ""
-"在项目之间添加一个分隔符。分隔符也占用一个索引，你可以通过使用[code]id[/code]"
-"参数来设置。\n"
-"可以选择提供一个标签[code]label[/code]，它将出现在分隔符的中心。"
+"在项目之间添加一个分隔符。分隔符也占用一个索引，你可以通过使用 [code]id[/"
+"code] 参数来设置。\n"
+"可以选择提供一个标签 [code]label[/code]，它将出现在分隔符的中心。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57899,8 +58023,8 @@ msgid ""
 "An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
 "provided, one will be created from the index."
 msgstr ""
-"添加一个[ShortCut]。\n"
-"可以选择提供[code]id[/code]。如果没有提供[code]id[/code]，将从索引中创建一"
+"添加一个 [ShortCut]。\n"
+"可以选择提供 [code]id[/code]。如果没有提供 [code]id[/code]，将从索引中创建一"
 "个。"
 
 #: doc/classes/PopupMenu.xml
@@ -57911,14 +58035,14 @@ msgid ""
 "An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
 "provided, one will be created from the index."
 msgstr ""
-"添加一个项目，当单击父[PopupMenu]节点时，它将作为子菜单。[code]submenu[/code]"
-"参数是子节点[PopupMenu]的名称，当点击项目时显示该子节点。\n"
-"可以选择提供[code]id[/code]。如果没有提供[code]id[/code]，将从索引中创建一"
+"添加一个项目，当单击父 [PopupMenu] 节点时，它将作为子菜单。[code]submenu[/"
+"code] 参数是子节点 [PopupMenu] 的名称，当点击项目时显示该子节点。\n"
+"可以选择提供 [code]id[/code]。如果没有提供 [code]id[/code]，将从索引中创建一"
 "个。"
 
 #: doc/classes/PopupMenu.xml
 msgid "Removes all items from the [PopupMenu]."
-msgstr "从[PopupMenu]中移除所有项目。"
+msgstr "从该 [PopupMenu] 中移除所有项目。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57932,19 +58056,20 @@ msgid ""
 "are special combinations of keys that activate the item, no matter which "
 "control is focused."
 msgstr ""
-"返回索引[code]idx[/code]处项目的加速项。加速器是一种特殊的按键组合，可以激活"
-"物品，无论哪个控制键处于焦点状态。"
+"返回索引 [code]idx[/code] 处项目的加速项。加速器是一种特殊的按键组合，可以激"
+"活物品，无论哪个控制键处于焦点状态。"
 
 #: doc/classes/PopupMenu.xml
 msgid "Returns the number of items in the [PopupMenu]."
-msgstr "返回[PopupMenu]中的项目数。"
+msgstr "返回该 [PopupMenu] 中的项目数。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
 "Returns the id of the item at index [code]idx[/code]. [code]id[/code] can be "
 "manually assigned, while index can not."
 msgstr ""
-"返回索引[code]idx[/code]处项目的id。[code]id[/code]可以手动分配，而索引不能。"
+"返回索引 [code]idx[/code] 处项目的 id。[code]id[/code] 可以手动分配，而索引不"
+"能。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57952,8 +58077,8 @@ msgid ""
 "Index is automatically assigned to each item by the engine. Index can not be "
 "set manually."
 msgstr ""
-"返回包含指定的[code]id[/code]的项的索引。索引由引擎自动分配给每个项目。不能手"
-"动设置索引。"
+"返回包含指定的 [code]id[/code] 的项的索引。索引由引擎自动分配给每个项目。不能"
+"手动设置索引。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -57961,26 +58086,26 @@ msgid ""
 "can set it with [method set_item_metadata], which provides a simple way of "
 "assigning context data to items."
 msgstr ""
-"返回指定项的元数据，该项可以是任何类型。您可以使用[method set_item_metadata]"
-"来设置它，它提供了一种将上下文数据分配给项的简单方法。"
+"返回指定项的元数据，该项可以是任何类型。您可以使用 [method "
+"set_item_metadata] 来设置它，它提供了一种将上下文数据分配给项的简单方法。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
 "Returns the [ShortCut] associated with the specified [code]idx[/code] item."
-msgstr "返回与指定的[code]idx[/code]项关联的[ShortCut]。"
+msgstr "返回与指定的 [code]idx[/code] 项关联的 [ShortCut]。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
 "Returns the submenu name of the item at index [code]idx[/code]. See [method "
 "add_submenu_item] for more info on how to add a submenu."
 msgstr ""
-"返回在索引[code]idx[/code]处的项目的子菜单名。更多关于如何添加子菜单的信息，"
-"请参阅[method add_submenu_item]。"
+"返回在索引 [code]idx[/code] 处的项目的子菜单名。更多关于如何添加子菜单的信"
+"息，请参阅 [method add_submenu_item]。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
 "Returns the tooltip associated with the specified index [code]idx[/code]."
-msgstr "返回与指定索引 [code]idx[/code]关联的工具提示。"
+msgstr "返回与指定索引 [code]idx[/code] 关联的工具提示。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -58056,7 +58181,7 @@ msgstr "将当前聚焦项目设置为给定的索引 [code]index[/code]。"
 
 #: doc/classes/PopupMenu.xml
 msgid "Hides the [PopupMenu] when the window loses focus."
-msgstr "当窗口失去焦点时隐藏[PopupMenu]。"
+msgstr "当窗口失去焦点时隐藏 [PopupMenu]。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
@@ -58064,7 +58189,7 @@ msgid ""
 "special combinations of keys that activate the item, no matter which control "
 "is focused."
 msgstr ""
-"设置索引[code]idx[/code]项的加速键。加速器是一种特殊的按键组合，可以激活物"
+"设置索引 [code]idx[/code] 项的加速键。加速器是一种特殊的按键组合，可以激活物"
 "品，无论哪个控制键处于焦点状态。"
 
 #: doc/classes/PopupMenu.xml
@@ -58098,15 +58223,15 @@ msgstr ""
 
 #: doc/classes/PopupMenu.xml
 msgid "Sets the checkstate status of the item at index [code]idx[/code]."
-msgstr "设置项目在index [code]idx[/code]处的checkstate状态。"
+msgstr "设置在索引号 [code]idx[/code] 处的项目的勾选状态。"
 
 #: doc/classes/PopupMenu.xml
 msgid ""
 "Enables/disables the item at index [code]idx[/code]. When it is disabled, it "
 "can't be selected and its action can't be invoked."
 msgstr ""
-"启用/禁用索引[code]idx[/code]项。当它被禁用时，就无法选择它，也无法调用它的操"
-"作。"
+"启用/禁用索引 [code]idx[/code] 项。当它被禁用时，就无法选择它，也无法调用它的"
+"操作。"
 
 #: doc/classes/PopupMenu.xml
 msgid "Replaces the [Texture] icon of the specified [code]idx[/code]."
@@ -62092,7 +62217,6 @@ msgstr ""
 "义。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "This is the maximum number of shaders that can be compiled (or reconstructed "
 "from cache) at the same time.\n"
@@ -62118,12 +62242,10 @@ msgstr ""
 "能多的异步编译的同时，不对游戏的响应性造成影响，否则就会辜负异步编译所带来的"
 "好处。换句话说，你可能会牺牲一点点的 FPS，总比同步编译让整个游戏停滞要好。\n"
 "默认值比较保守，所以建议你根据自己的目标硬件作出调整。\n"
-"[b]注意：[/b]本设置仅在 [code]rendering/gles3/shaders/"
-"shader_compilation_mode[/code] [b]不为[/b] [code]Synchronous[/code] 时有意"
-"义。"
+"[b]注意：[/b]本设置仅在 [member rendering/gles3/shaders/"
+"shader_compilation_mode] [b]不为[/b] [code]Synchronous[/code] 时有意义。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "The default is a very conservative override for [member rendering/gles3/"
 "shaders/max_simultaneous_compiles].\n"
@@ -62132,15 +62254,13 @@ msgid ""
 "[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
 "shaders/shader_compilation_mode] is [b]not[/b] [code]Synchronous[/code]."
 msgstr ""
-"默认是针对 [code]rendering/gles3/shaders/max_concurrent_compiles[/code] 的覆"
+"默认是针对 [member rendering/gles3/shaders/max_simultaneous_compiles] 的覆"
 "盖，取值非常保守。\n"
 "根据你所设定为目标的特定设备，你可能会想要提高这个值。\n"
-"[b]注意：[/b]本设置仅在 [code]rendering/gles3/shaders/"
-"shader_compilation_mode[/code] [b]不为[/b] [code]Synchronous[/code] 时有意"
-"义。"
+"[b]注意：[/b]本设置仅在 [member rendering/gles3/shaders/"
+"shader_compilation_mode] [b]不为[/b] [code]Synchronous[/code] 时有意义。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "The default is a very conservative override for [member rendering/gles3/"
 "shaders/max_simultaneous_compiles].\n"
@@ -62149,15 +62269,13 @@ msgid ""
 "[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
 "shaders/shader_compilation_mode] is [b]not[/b] [code]Synchronous[/code]."
 msgstr ""
-"默认是针对 [code]rendering/gles3/shaders/max_concurrent_compiles[/code] 的覆"
+"默认是针对 [member rendering/gles3/shaders/max_simultaneous_compiles] 的覆"
 "盖，取值非常保守。\n"
 "根据你所设定为目标的特定设备，你可能会想要提高这个值。\n"
-"[b]注意：[/b]本设置仅在 [code]rendering/gles3/shaders/"
-"shader_compilation_mode[/code] [b]不为[/b] [code]Synchronous[/code] 时有意"
-"义。"
+"[b]注意：[/b]本设置仅在 [member rendering/gles3/shaders/"
+"shader_compilation_mode] [b]不为[/b] [code]Synchronous[/code] 时有意义。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "The maximum size, in megabytes, that the ubershader cache can grow up to. On "
 "startup, the least recently used entries will be deleted until the total "
@@ -62167,12 +62285,10 @@ msgid ""
 msgstr ""
 "超级着色器缓存所能增长到的最大大小，单位为兆字节。在启动时，会删除最久未用的"
 "条目，直到总大小到达范围内。\n"
-"[b]注意：[/b]本设置仅在 [code]rendering/gles3/shaders/"
-"shader_compilation_mode[/code] 为 [code]Asynchronous + Cache[/code] 时有意"
-"义。"
+"[b]注意：[/b]本设置仅在 [member rendering/gles3/shaders/"
+"shader_compilation_mode] 为 [code]Asynchronous + Cache[/code] 时有意义。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "An override for [member rendering/gles3/shaders/shader_cache_size_mb], so a "
 "smaller maximum size can be configured for mobile platforms, where storage "
@@ -62180,14 +62296,12 @@ msgid ""
 "[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
 "shaders/shader_compilation_mode] is set to [code]Asynchronous + Cache[/code]."
 msgstr ""
-"[code]rendering/gles3/shaders/ubershader_cache_size_mb[/code] 的覆盖项，为针"
-"对移动平台配置更小的最大大小，移动平台的存储空间更有限。\n"
-"[b]注意：[/b]本设置仅在 [code]rendering/gles3/shaders/"
-"shader_compilation_mode[/code] 为 [code]Asynchronous + Cache[/code] 时有意"
-"义。"
+"[member rendering/gles3/shaders/shader_cache_size_mb] 的覆盖项，为针对移动平"
+"台配置更小的最大大小，移动平台的存储空间更有限。\n"
+"[b]注意：[/b]本设置仅在 [member rendering/gles3/shaders/"
+"shader_compilation_mode] 为 [code]Asynchronous + Cache[/code] 时有意义。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "An override for [member rendering/gles3/shaders/shader_cache_size_mb], so a "
 "smaller maximum size can be configured for web platforms, where storage "
@@ -62197,11 +62311,11 @@ msgid ""
 "[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
 "shaders/shader_compilation_mode] is set to [code]Asynchronous + Cache[/code]."
 msgstr ""
-"[code]rendering/gles3/shaders/ubershader_cache_size_mb[/code] 的覆盖项，为针"
-"对移动平台配置更小的最大大小，移动平台的存储空间更有限。\n"
-"[b]注意：[/b]本设置仅在 [code]rendering/gles3/shaders/"
-"shader_compilation_mode[/code] 为 [code]Asynchronous + Cache[/code] 时有意"
-"义。"
+"[member rendering/gles3/shaders/shader_cache_size_mb] 的覆盖项，为针对移动平"
+"台配置更小的最大大小，移动平台的存储空间更有限。\n"
+"[b]注意：[/b]目前 Web 平台尚不支持着色器缓存。\n"
+"[b]注意：[/b]本设置仅在 [member rendering/gles3/shaders/"
+"shader_compilation_mode] 为 [code]Asynchronous + Cache[/code] 时有意义。"
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62247,28 +62361,26 @@ msgstr ""
 "着色器也不会使用异步编译。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "An override for [member rendering/gles3/shaders/shader_compilation_mode], so "
 "asynchronous compilation can be disabled on mobile platforms.\n"
 "You may want to do that since mobile GPUs generally won't support "
 "ubershaders due to their complexity."
 msgstr ""
-"[code]rendering/gles3/shaders/shader_compilation_mode[/code] 的覆盖项，用于为"
-"移动设备禁用异步编译。\n"
+"[member rendering/gles3/shaders/shader_compilation_mode] 的覆盖项，用于为移动"
+"设备禁用异步编译。\n"
 "移动 GPU 通常不会支持超级着色器，因为其复杂度较高。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "An override for [member rendering/gles3/shaders/shader_compilation_mode], so "
 "asynchronous compilation can be disabled on web platforms.\n"
 "You may want to do that since certain browsers (especially on mobile "
 "platforms) generally won't support ubershaders due to their complexity."
 msgstr ""
-"[code]rendering/gles3/shaders/shader_compilation_mode[/code] 的覆盖项，用于为"
-"移动设备禁用异步编译。\n"
-"移动 GPU 通常不会支持超级着色器，因为其复杂度较高。"
+"[member rendering/gles3/shaders/shader_compilation_mode] 的覆盖项，用于为 "
+"Web 平台禁用异步编译。\n"
+"某些浏览器（尤其在移动平台上）通常不会支持超级着色器，因为其复杂度较高。"
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -62887,13 +62999,12 @@ msgid ""
 msgstr "阴影贴图的细分象限大小。请参阅阴影映射文档。"
 
 #: doc/classes/ProjectSettings.xml
-#, fuzzy
 msgid ""
 "Size for shadow atlas (used for OmniLights and SpotLights). The value will "
 "be rounded up to the nearest power of 2. See shadow mapping documentation."
 msgstr ""
 "设置阴影图集的图像大小（用于全向光和聚光）。该值将被四舍五入到最接近的 2 的"
-"幂。"
+"幂。见阴影贴图文档。"
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
@@ -64170,8 +64281,8 @@ msgid ""
 "it tries to separate itself from whatever is touching its far endpoint. It's "
 "often useful for characters."
 msgstr ""
-"二维碰撞的射线形状。射线并不是真正的碰撞体；相反，它试图将自己与接触其远端的"
-"任何东西分开。它通常对角色很有用。"
+"2D 碰撞的射线形状。射线并不是真正的碰撞体；相反，它试图将自己与接触其远端的任"
+"何东西分开。它通常对角色很有用。"
 
 #: doc/classes/Rect2.xml
 msgid "2D axis-aligned bounding box."
@@ -64315,13 +64426,13 @@ msgstr "返回一个更大的 [Rect2]，其中包含这个 [Rect2] 和 [code]b[/
 
 #: doc/classes/RectangleShape2D.xml
 msgid "Rectangle shape for 2D collisions."
-msgstr "二维碰撞的矩形。"
+msgstr "2D 碰撞的矩形。"
 
 #: doc/classes/RectangleShape2D.xml
 msgid ""
 "Rectangle shape for 2D collisions. This shape is useful for modeling box-"
 "like 2D objects."
-msgstr "二维碰撞的矩形。这个形状对于建模盒状2D对象很有用。"
+msgstr "2D 碰撞的矩形。这个形状对于建模盒状 2D 对象很有用。"
 
 #: doc/classes/RectangleShape2D.xml
 msgid ""
@@ -66279,8 +66390,8 @@ msgid ""
 "for a body."
 msgstr ""
 "在物理处理过程中被调用，允许你读取并安全地修改对象的模拟状态。默认情况下，它"
-"是在通常的物理行为之外工作的，但是[member custom_integrator]属性允许你禁用默"
-"认行为，为一个物体施加完全自定义的合力。"
+"会和通常的物理行为一起生效，但是你可以通过 [member custom_integrator] 属性禁"
+"用默认行为，为物体施加完全自定义的合力。"
 
 #: doc/classes/RigidBody.xml
 msgid ""
@@ -66321,7 +66432,7 @@ msgid ""
 "position uses the rotation of the global coordinate system, but is centered "
 "at the object's origin."
 msgstr ""
-"对物体施加一个有向的冲量。冲量是与时间无关的! 在每一帧中施加一个冲量将产生一"
+"对物体施加一个有向的冲量。冲量是与时间无关的！在每一帧中施加一个冲量将产生一"
 "个与帧率相关的力。出于这个原因，它应该只在模拟一次性影响时使用。该位置使用全"
 "局坐标系的旋转，但以物体的原点为中心。"
 
@@ -66564,12 +66675,12 @@ msgid ""
 "[code]body[/code] the [Node], if it exists in the tree, of the other "
 "[PhysicsBody] or [GridMap]."
 msgstr ""
-"当与另一个[PhysicsBody]或[GridMap]发生碰撞时触发。需要将[member "
-"contact_monitor]设置为 [code]true[/code]，并且将[member contacts_reported]设"
-"置得足够高以检测所有的碰撞。如果[MeshLibrary]有碰撞[Shape]，[GridMap]就会被检"
-"测到。\n"
-"[code]body[/code]的[Node]，如果它存在于树中，则是其他[PhysicsBody]或[GridMap]"
-"的节点。"
+"当与另一个 [PhysicsBody] 或 [GridMap] 发生碰撞时触发。需要将 [member "
+"contact_monitor] 设置为 [code]true[/code]，并且将 [member contacts_reported] "
+"设置得足够高以检测所有的碰撞。如果 [MeshLibrary] 有碰撞 [Shape]，[GridMap] 就"
+"会被检测到。\n"
+"[code]body[/code] 的 [Node]，如果它存在于树中，则是其他 [PhysicsBody] 或 "
+"[GridMap] 的节点。"
 
 #: doc/classes/RigidBody.xml
 msgid ""
@@ -66580,12 +66691,12 @@ msgid ""
 "[code]body[/code] the [Node], if it exists in the tree, of the other "
 "[PhysicsBody] or [GridMap]."
 msgstr ""
-"当与另一个[PhysicsBody]或[GridMap]的碰撞结束时触发。需要将[member "
-"contact_monitor]设置为 [code]true[/code]，并且将[member contacts_reported]设"
-"置得足够高以检测到所有的碰撞。如果[MeshLibrary]有碰撞[Shape]，[GridMap]就会被"
-"检测到。\n"
-"[code]body[/code]的[Node]，如果它存在于树中，则是其他[PhysicsBody]或[GridMap]"
-"的节点。"
+"当与另一个 [PhysicsBody]或 [GridMap] 的碰撞结束时触发。需要将 [member "
+"contact_monitor] 设置为 [code]true[/code]，并且将 [member contacts_reported] "
+"设置得足够高以检测到所有的碰撞。如果 [MeshLibrary] 有碰撞 [Shape]，[GridMap] "
+"就会被检测到。\n"
+"[code]body[/code]的[Node]，如果它存在于树中，则是其他 [PhysicsBody] 或 "
+"[GridMap] 的节点。"
 
 #: doc/classes/RigidBody.xml
 msgid ""
@@ -66678,35 +66789,34 @@ msgid ""
 "engine or [code]emit_signal(\"sleeping_state_changed\")[/code] is used."
 msgstr ""
 "当物理引擎改变物体的睡眠状态时发出。\n"
-"[b]注意：[/b]改变[member sleeping]的值不会触发这个信号。只有当物理引擎改变了"
-"睡眠状态或者使用了[code]emit_signal(\"sleeping_state_changed\")[/code]时，它"
-"才会被发出。"
+"[b]注意：[/b]改变 [member sleeping] 的值不会触发这个信号。只有当物理引擎改变"
+"了睡眠状态或者使用了 [code]emit_signal(\"sleeping_state_changed\")[/code] "
+"时，它才会被发出。"
 
 #: doc/classes/RigidBody.xml
 msgid ""
 "Rigid body mode. This is the \"natural\" state of a rigid body. It is "
 "affected by forces, and can move, rotate, and be affected by user code."
 msgstr ""
-"刚体模式。这是一个刚体的 \"自然 \"状态。它受到力的影响，可以移动、旋转，并受"
-"到用户代码的影响。"
+"刚体模式。这是一个刚体的“自然”状态。它受到力的影响，可以移动、旋转，并受到用"
+"户代码的影响。"
 
 #: doc/classes/RigidBody.xml
 msgid ""
 "Static mode. The body behaves like a [StaticBody], and can only move by user "
 "code."
-msgstr "静止模式。实体的行为就像一个[StaticBody]，只能通过用户代码移动。"
+msgstr "静止模式。该实体的行为与 [StaticBody] 类似，只能被用户代码移动。"
 
 #: doc/classes/RigidBody.xml
 msgid ""
 "Character body mode. This behaves like a rigid body, but can not rotate."
-msgstr "角色模式。这与刚体的行为类似，但不能旋转。"
+msgstr "角色模式。与刚体的行为类似，但不能旋转。"
 
 #: doc/classes/RigidBody.xml
 msgid ""
 "Kinematic body mode. The body behaves like a [KinematicBody], and can only "
 "move by user code."
-msgstr ""
-"运动体模式。这个实体的行为就像一个[KinematicBody]，只能通过用户代码来移动。"
+msgstr "运动体模式。该实体的行为与 [KinematicBody] 类似，只能被用户代码移动。"
 
 #: doc/classes/RigidBody2D.xml
 msgid "A body that is controlled by the 2D physics engine."
@@ -66744,7 +66854,7 @@ msgstr ""
 "要记住，物理物体在自己管理变换，它会覆盖你的变换设置。所以任何直接或间接的变"
 "换（包括节点或其父级的缩放）将只在编辑器中可见，并在运行时立即重置。\n"
 "如果你需要覆盖默认的物理行为或者在运行时添加变换，你可以写一个自定义的合力。"
-"参阅 [member custom_integrator]。\n"
+"见 [member custom_integrator]。\n"
 "质量中心总是位于节点的原点，而不考虑 [CollisionShape2D] 中心点的偏移。"
 
 #: doc/classes/RigidBody2D.xml
@@ -66764,10 +66874,10 @@ msgid ""
 "custom_integrator] allows you to disable the default behavior and write "
 "custom force integration for a body."
 msgstr ""
-"允许你读取并安全地修改对象的模拟状态。如果你需要直接改变物体的"
-"[code]position[/code]或其他物理属性，请使用它代替[method Node."
-"_physics_process]。默认情况下，它是在通常的物理行为之外工作的，但是[member "
-"custom_integrator]允许你禁用默认行为并为一个物体编写自定义的合力。"
+"允许你读取并安全地修改对象的模拟状态。如果你需要直接改变物体的 "
+"[code]position[/code] 或其他物理属性，请使用它代替 [method Node."
+"_physics_process]。默认情况下，它是在通常的物理行为之外工作的，但是 [member "
+"custom_integrator] 允许你禁用默认行为并为一个物体编写自定义的合力。"
 
 #: doc/classes/RigidBody2D.xml
 msgid ""
@@ -66778,8 +66888,8 @@ msgid ""
 "global coordinate system, but is centered at the object's origin."
 msgstr ""
 "对物体施加一个有向的冲量。冲量是与时间无关的。每一帧应用一个冲量会有一个与帧"
-"相关的力。由于这个原因，它只应该在模拟一次性冲击时使用（否则就使用\"_force "
-"\"函数）。位置使用全局坐标系的旋转，但以物体的原点为中心。"
+"相关的力。由于这个原因，它只应该在模拟一次性冲击时使用（否则就使用“_force”函"
+"数）。位置使用全局坐标系的旋转，但以物体的原点为中心。"
 
 #: doc/classes/RigidBody2D.xml
 msgid ""
@@ -66845,8 +66955,8 @@ msgid ""
 "If [code]true[/code], the body will emit signals when it collides with "
 "another RigidBody2D. See also [member contacts_reported]."
 msgstr ""
-"如果为 [code]true[/code]，则物体在与另一个RigidBody2D碰撞时会发出信号。参阅"
-"[member contacts_reported]。"
+"如果为 [code]true[/code]，则物体在与另一个 RigidBody2D 碰撞时会发出信号。另请"
+"参阅 [member contacts_reported]。"
 
 #: doc/classes/RigidBody2D.xml
 msgid ""
@@ -66902,7 +67012,7 @@ msgid ""
 "from the [b]Default Gravity[/b] value in [b]Project > Project Settings > "
 "Physics > 2d[/b] and/or any additional gravity vector applied by [Area2D]s."
 msgstr ""
-"乘以施加在物体上的重力。物体的重力是由[b]项目 > 项目设置 > 物理 > 2D[/b]中的"
+"乘以施加在物体上的重力。物体的重力是由[b]项目 > 项目设置 > 物理 > 2D[/b] 中的"
 "[b]默认重力[/b]值和/或任何由 [Area2D] 应用的额外重力向量计算出来的。"
 
 #: doc/classes/RigidBody2D.xml
@@ -66939,7 +67049,7 @@ msgid ""
 "thread and runs at a different granularity. Use [method _integrate_forces] "
 "as your process loop for precise control of the body state."
 msgstr ""
-"该实体的线速度，单位为像素每秒。可以偶尔使用，但是[b]不要每一帧都设置它[/b]，"
+"该实体的线速度，单位为像素每秒。可以偶尔使用，但是[b]不要每一帧都去设置[/b]，"
 "因为物理可能在另一个线程中运行，并且以不同的间隔。使用 [method "
 "_integrate_forces] 作为你的进程循环，以精确控制物体状态。"
 
@@ -67067,20 +67177,20 @@ msgstr ""
 
 #: doc/classes/RigidBody2D.xml
 msgid "Static mode. The body behaves like a [StaticBody2D] and does not move."
-msgstr "静态模式。物体的行为就像一个[StaticBody2D]，不会移动。"
+msgstr "静态模式。该物体的行为与 [StaticBody2D] 类似，不会移动。"
 
 #: doc/classes/RigidBody2D.xml
 msgid ""
 "Character mode. Similar to [constant MODE_RIGID], but the body can not "
 "rotate."
-msgstr "角色模式。与 [constant MODE_RIGID] 类似，但主体不能旋转。"
+msgstr "角色模式。与 [constant MODE_RIGID] 类似，但该实体不能旋转。"
 
 #: doc/classes/RigidBody2D.xml
 msgid ""
 "Kinematic mode. The body behaves like a [KinematicBody2D], and must be moved "
 "by code."
 msgstr ""
-"运动学模式。这个物体的行为就像一个 [KinematicBody2D]，必须通过代码来移动。"
+"运动学模式。该物体的行为就像与 [KinematicBody2D] 类似，必须通过代码来移动。"
 
 #: doc/classes/RigidBody2D.xml
 msgid ""
@@ -67104,7 +67214,7 @@ msgstr "使用形状投射启用连续碰撞检测。这是最慢的 CCD 方法�
 
 #: doc/classes/Room.xml
 msgid "Room node, used to group objects together locally for [Portal] culling."
-msgstr "Room 节点，用于在本地将对象组合在一起以进行 [Portal] 剔除。"
+msgstr "房间节点，用于在本地将对象组合在一起以进行 [Portal] 剔除。"
 
 #: doc/classes/Room.xml
 msgid ""
@@ -67245,7 +67355,7 @@ msgid ""
 "before unloading a level, when transitioning from level to level, or "
 "returning to a main menu."
 msgstr ""
-"该方法会从 [b]portal graph[/b] 清除所有转换数据。在卸载关卡、从关卡转换到关卡"
+"该方法会清除 [b]room graph[/b] 中所有的转换数据。在卸载关卡、从关卡转换到关卡"
 "或返回主菜单时使用此选项。"
 
 #: doc/classes/RoomManager.xml
@@ -67345,7 +67455,7 @@ msgstr ""
 "建议您仅将对象放置在希望留在这些空间内的空间中 - 即 [code]portal mode[/code]"
 "是 [code]STATIC[/code] 或 [code]DYNAMIC[/code]（不穿越 Portal）。"
 "[code]GLOBAL[/code] 和 [code]ROAMING[/code] 对象最好放置在场景树的另一部分，"
-"以避免混淆。有关portal模式的完整说明，请参阅 [CullInstance]。"
+"以避免混淆。有关 portal 模式的完整说明，请参阅 [CullInstance]。"
 
 #: doc/classes/RoomManager.xml
 msgid ""
@@ -68461,7 +68571,6 @@ msgid ""
 msgstr "通过脚本进行通用动画的轻量级对象，使用 [Tweener]。"
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "[SceneTreeTween] is a tween managed by the scene tree. As opposed to "
 "[Tween], it does not require the instantiation of a node.\n"
@@ -68543,21 +68652,21 @@ msgstr ""
 "建 [SceneTreeTween]。手动创建的 [SceneTreeTween]（即使用  [code]Tween.new()[/"
 "code]）是无效的，不能用于对值进行补间，但你可以用 [method interpolate_value] "
 "来手动插值。\n"
-"[SceneTreeTween] 动画是由 [Tweener] 序列构成的，默认串行执行。向该 "
-"[SceneTreeTween] 追加 [Tweener] 即可创建序列。使用 [Tweener] 来做动画就叫做补"
-"间（Tweening）。示例补间序列是类似这样的：\n"
+"补间动画是通过向 [SceneTreeTween] 对象中添加 [Tweener] 创建的，添加的方法有 "
+"[method tween_property]、[method tween_interval]、[method tween_callback]、"
+"[method tween_method]：\n"
 "[codeblock]\n"
 "var tween = get_tree().create_tween()\n"
 "tween.tween_property($Sprite, \"modulate\", Color.red, 1)\n"
 "tween.tween_property($Sprite, \"scale\", Vector2(), 1)\n"
 "tween.tween_callback($Sprite, \"queue_free\")\n"
 "[/codeblock]\n"
-"这个序列会让 [code]$Sprite[/code] 变红，然后缩小，最后调用 [method Node."
-"queue_free] 来移除精灵。更多用法信息请参阅 [method tween_property]、[method "
-"tween_interval]、[method tween_callback]、[method tween_method] 方法。\n"
+"这个序列会让 [code]$Sprite[/code] 变红，然后缩小，最后再调用 [method Node."
+"queue_free] 来释放该精灵。[Tweener] 默认是一个接一个执行的。这个行为可以通过 "
+"[method parallel] 和 [method set_parallel] 更改。\n"
 "使用 [code]tween_*[/code] 方法创建 [Tweener] 后，可以使用链式方法调用来调整"
 "该 [Tweener] 的属性。例如，如果你想要在上面的例子中设置不同的过渡类型，那么你"
-"可以：\n"
+"可以使用 [method set_trans]：\n"
 "[codeblock]\n"
 "var tween = get_tree().create_tween()\n"
 "tween.tween_property($Sprite, \"modulate\", Color.red, 1).set_trans(Tween."
@@ -68566,8 +68675,9 @@ msgstr ""
 "TRANS_BOUNCE)\n"
 "tween.tween_callback($Sprite, \"queue_free\")\n"
 "[/codeblock]\n"
-"[SceneTreeTween] 的大部分方法都可以用这种方法进行链式调用。在这个示例中，我们"
-"对该 [SceneTreeTween] 进行了绑定，并设置了默认的过渡：\n"
+"[SceneTreeTween] 的大部分方法都可以用这种方法进行链式调用。在下面的示例中，我"
+"们将该 [SceneTreeTween] 绑定到了执行脚本的节点，并为其 [Tweener] 设置了默认的"
+"过渡：\n"
 "[codeblock]\n"
 "var tween = get_tree().create_tween().bind_node(self).set_trans(Tween."
 "TRANS_ELASTIC)\n"
@@ -68579,7 +68689,7 @@ msgstr ""
 "[codeblock]\n"
 "var tween = create_tween()\n"
 "for sprite in get_children():\n"
-"    tween.tween_property(sprite, \"position\", Vector2(), 1)\n"
+"    tween.tween_property(sprite, \"position\", Vector2(0, 0), 1)\n"
 "[/codeblock]\n"
 "上面的示例中，该节点的所有子节点都会依次被移动到 (0, 0)。\n"
 "一些 [Tweener] 会用到过渡和缓动。前者接受 [enum Tween.TransitionType] 常量，"
@@ -68633,7 +68743,6 @@ msgstr ""
 "[/codeblock]"
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "Processes the [SceneTreeTween] by the given [code]delta[/code] value, in "
 "seconds. This is mostly useful for manual control when the [SceneTreeTween] "
@@ -68648,14 +68757,14 @@ msgid ""
 msgstr ""
 "使用给定的增量秒数 [code]delta[/code] 处理该 [SceneTreeTween]。最常见的用法是"
 "在该 [SceneTreeTween] 暂停时对其进行手动控制。也可用于立即停止该 "
-"[SceneTreeTween] 的动画，使用比完整长度更大的 [code]delta[/code] 即可。\n"
+"[SceneTreeTween] 的动画，将 [code]delta[/code] 设得比完整长度更大即可。\n"
 "如果该 [SceneTreeTween] 仍然有未完成的 [Tweener]，则返回 [code]true[/"
 "code]。\n"
-"[b]注意：[/b]该 [SceneTreeTween] 在完成后会失效，但你可以在 step 后调用 "
-"[method stop] 将其保留并重置。"
+"[b]注意：[/b]该 [SceneTreeTween] 完成动画后，会在下一个处理帧中失效。你可以在"
+"执行 [method custom_step] 后调用 [method stop] 将该 [SceneTreeTween] 保留并重"
+"置。"
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "Returns the total time in seconds the [SceneTreeTween] has been animating (i."
 "e. the time since it started, not counting pauses etc.). The time is "
@@ -68716,13 +68825,14 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 "返回该 [SceneTreeTween] 是否有效。有效的 [SceneTreeTween] 是由场景树包含的 "
 "[SceneTreeTween]（即 [method SceneTree.get_processed_tweens] 返回的数组中包含"
 "这个 [SceneTreeTween]）。[SceneTreeTween] 失效的情况有：补间完成、被销毁、使"
-"用 [code]Tween.new()[/code] 创建。无效的 [SceneTreeTween] 不能追加 "
-"[Tweener]，因为无法进行动画。不过 [method interpolate_value] 还是可以使用的。"
+"用 [code]SceneTreeTween.new()[/code] 创建。无效的 [SceneTreeTween] 不能追加 "
+"[Tweener]。"
 
 #: doc/classes/SceneTreeTween.xml
 msgid "Aborts all tweening operations and invalidates the [SceneTreeTween]."
@@ -68773,24 +68883,25 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 "这只该补间序列的重复次数，即 [code]set_loops(2)[/code] 会让动画执行两次。\n"
 "调用这个方法时如果不带参数，那么该 [SceneTreeTween] 会无限执行，直到被 "
-"[method kill] 销毁、绑定节点被释放、或者所有进行动画的对象都被释放（无法再进"
-"行任何动画）。\n"
-"[b]警告：[/b]使用无限循环时请一定要加入一些时长/延迟。0 时长的循环动画（例如"
-"单个不带延迟的 [CallbackTweener] 或者节点无效的 [PropertyTweener]）和无限 "
-"[code]while[/code] 循环是一样的，会导致游戏冻结。如果 [SceneTreeTween] 的生命"
-"期依赖于某个节点，请一定使用 [method bind_node]。"
+"[method kill] 销毁、该 [SceneTreeTween] 绑定的节点被释放、或者所有进行动画的"
+"对象都被释放（无法再进行任何动画）。\n"
+"[b]警告：[/b]使用无限循环时请一定要加入一些时长/延迟。为了防止游戏冻结，0 时"
+"长的循环动画（例如单个不带延迟的 [CallbackTweener]）会在循环若干次后停止，造"
+"成出乎预料的结果。如果 [SceneTreeTween] 的生命期依赖于某个节点，请一定使用 "
+"[method bind_node]。"
 
 #: doc/classes/SceneTreeTween.xml
 msgid ""
@@ -68874,7 +68985,6 @@ msgstr ""
 "[/codeblock]"
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "Creates and appends an [IntervalTweener]. This method can be used to create "
 "delays in the tween animation, as an alternative to using the delay in other "
@@ -68971,7 +69081,6 @@ msgstr ""
 "[/codeblock]"
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "Creates and appends a [PropertyTweener]. This method tweens a "
 "[code]property[/code] of an [code]object[/code] between an initial value and "
@@ -69005,7 +69114,7 @@ msgstr ""
 "创建并追加一个 [PropertyTweener]。这个方法会将 [code]object[/code] 对象的 "
 "[code]property[/code] 属性在初始值和最终值 [code]final_val[/code] 之间进行补"
 "间，持续时间为 [code]duration[/code] 秒。初始值默认为该 [PropertyTweener] 启"
-"动时的值。例如：\n"
+"动时该属性的值。例如：\n"
 "[codeblock]\n"
 "var tween = create_tween()\n"
 "tween.tween_property($Sprite, \"position\", Vector2(100, 200), 1)\n"
@@ -69027,7 +69136,6 @@ msgstr ""
 "[/codeblock]"
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "Emitted when the [SceneTreeTween] has finished all tweening. Never emitted "
 "when the [SceneTreeTween] is set to infinite looping (see [method "
@@ -69038,12 +69146,11 @@ msgid ""
 msgstr ""
 "在该 [SceneTreeTween] 完成所有补间时触发。该 [SceneTreeTween] 被设为无限循环"
 "时不会触发（见 [method set_loops]）。\n"
-"[b]注意：[/b]触发这个信号后，该 [SceneTreeTween] 会被移除（置为无效），但不是"
-"立即发生的，而是在下一个处理帧中发生。在该信号的回调中调用 [method stop] 会保"
-"留该 [SceneTreeTween]。"
+"[b]注意：[/b]触发这个信号后，该 [SceneTreeTween] 会在下一个处理帧中被移除（置"
+"为无效）。在该信号的回调中调用 [method stop] 可以防止该 [SceneTreeTween] 被移"
+"除。"
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "Emitted when a full loop is complete (see [method set_loops]), providing the "
 "loop index. This signal is not emitted after the final loop, use [signal "
@@ -69053,7 +69160,6 @@ msgstr ""
 "会在最后一次循环后触发，这种情况请使用 [signal finished] 代替。"
 
 #: doc/classes/SceneTreeTween.xml
-#, fuzzy
 msgid ""
 "Emitted when one step of the [SceneTreeTween] is complete, providing the "
 "step index. One step is either a single [Tweener] or a group of [Tweener]s "
@@ -69733,7 +69839,7 @@ msgstr ""
 
 #: doc/classes/Shape2D.xml
 msgid "The shape's custom solver bias."
-msgstr "形状的自定义求解器偏差。"
+msgstr "形状的自定义求解器偏置。"
 
 #: doc/classes/ShortCut.xml
 msgid "A shortcut for binding input."
@@ -70671,11 +70777,37 @@ msgstr ""
 "视化和编辑手柄。"
 
 #: doc/classes/Spatial.xml
+#, fuzzy
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+"局部变换的旋转部分以弧度表示，以 YXZ-Euler 角的形式表示（X 角、Y 角、Z "
+"角）。\n"
+"[b]注意：[/b]在数学意义上，旋转是一个矩阵而不是一个向量。这三个欧拉角是旋转矩"
+"阵欧拉角参数化的三个独立参数，存储在 [Vector3] 数据结构中并不是因为旋转是一个"
+"矢量，而是因为 [Vector3] 是一种方便存储 3 个浮点数的数据结构。因此，对旋转“向"
+"量”应用仿射操作是没有意义的。"
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr "此节点的世界空间（全局）[Transform]。"
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -73660,6 +73792,29 @@ msgid ""
 "\"Godot\"]]))\n"
 "[/codeblock]"
 msgstr ""
+"格式化字符串，将所有的 [code]placeholder[/code] 替换为 [code]values[/code] 中"
+"的元素。\n"
+"[code]values[/code] 可以是 [Dictionary] 或 [Array]。[code]placeholder[/code] "
+"中的下划线都会事先被替换为对应的键。数组元素使用其索引号作为键。\n"
+"[codeblock]\n"
+"# 输出：Waiting for Godot 是 Samuel Beckett 的戏剧，Godot 引擎由此得名。\n"
+"var use_array_values = \"Waiting for {0} 是 {1} 的戏剧，{0} 引擎由此得"
+"名。\"\n"
+"print(use_array_values.format([\"Godot\", \"Samuel Beckett\"]))\n"
+"\n"
+"# 输出：第 42 号用户是 Godot。\n"
+"print(\"第 {id} 号用户是 {name}。\".format({\"id\": 42, \"name\": "
+"\"Godot\"}))\n"
+"[/codeblock]\n"
+"[code]values[/code] 为数组时还会进行一些额外的处理。如果 [code]placeholder[/"
+"code] 中不包含下划线，该数组中的元素会依次对出现的占位符进行替换；如果数组元"
+"素是一个包含两个元素的数组，那么它就会被解释为键值对。\n"
+"[codeblock]\n"
+"# 输出：第 42 号用户是 Godot。\n"
+"print(\"第 {} 号用户是 {}。\".format([42, \"Godot\"], \"{}\"))\n"
+"print(\"第 {id} 号用户是 {name}。\".format([[\"id\", 42], [\"name\", "
+"\"Godot\"]]))\n"
+"[/codeblock]"
 
 #: doc/classes/String.xml
 msgid "If the string is a valid file path, returns the base directory name."
@@ -73924,7 +74079,6 @@ msgstr ""
 "[/codeblock]"
 
 #: doc/classes/String.xml
-#, fuzzy
 msgid ""
 "Returns [code]true[/code] if this string contains a valid integer.\n"
 "[codeblock]\n"
@@ -73937,11 +74091,11 @@ msgid ""
 msgstr ""
 "如果该字符串包含有效的整数，则返回 [code]true[/code]\n"
 "[codeblock]\n"
-"print(\"7\".is_valid_int()) # 输出“True”\n"
-"print(\"14.6\".is_valid_int()) # 输出“False”\n"
-"print(\"L\".is_valid_int()) # 输出“False”\n"
-"print(\"+3\".is_valid_int()) # 输出“True”\n"
-"print(\"-12\".is_valid_int()) # 输出“True”\n"
+"print(\"7\".is_valid_integer()) # 输出“True”\n"
+"print(\"14.6\".is_valid_integer()) # 输出“False”\n"
+"print(\"L\".is_valid_integer()) # 输出“False”\n"
+"print(\"+3\".is_valid_integer()) # 输出“True”\n"
+"print(\"-12\".is_valid_integer()) # 输出“True”\n"
 "[/codeblock]"
 
 #: doc/classes/String.xml
@@ -74483,6 +74637,10 @@ msgid ""
 "directly from creating a canvas item in the [VisualServer] with [method "
 "VisualServer.canvas_item_create]."
 msgstr ""
+"使用由给定的 [RID] 标识的画布项绘制这个样式盒。\n"
+"[RID] 值既可以通过对现有的基于 [CanvasItem] 节点调用 [method CanvasItem."
+"get_canvas_item] 获得，也可以通过 [method VisualServer.canvas_item_create] 直"
+"接在 [VisualServer] 上创建画布项获得。"
 
 #: doc/classes/StyleBox.xml
 msgid "Returns the size of this [StyleBox] without the margins."
@@ -76334,9 +76492,8 @@ msgid "If [code]true[/code], a right-click displays the context menu."
 msgstr "为 [code]true[/code] 时右键单击会显示上下文菜单。"
 
 #: doc/classes/TextEdit.xml
-#, fuzzy
 msgid "If [code]true[/code], allow drag and drop of selected text."
-msgstr "如果为 [code]true[/code]，则可以选择和编辑该值。"
+msgstr "如果为 [code]true[/code]，则允许拖放选中的文本。"
 
 #: doc/classes/TextEdit.xml
 msgid ""
@@ -77018,7 +77175,7 @@ msgid ""
 msgstr ""
 "是 [Texture3D] 和 [TextureArray] 的基类。不能直接使用，但包含访问和使用 "
 "[Texture3D] 和 [TextureArray] 的所有必要功能。数据是以每层为单位设置的。对于 "
-"[Texture3D]，层指定了深度或 Z-index，它们可以被视为一堆二维切片。同样地，对"
+"[Texture3D]，层指定了深度或 Z-index，它们可以被视为一堆 2D 切片。同样地，对"
 "于 [TextureArray]，层指定了数组层。"
 
 #: doc/classes/TextureLayered.xml
@@ -77065,7 +77222,7 @@ msgstr ""
 msgid ""
 "Sets the data for the specified layer. Data takes the form of a 2-"
 "dimensional [Image] resource."
-msgstr "设置指定图层的数据。数据的形式是二维的[Image]资源。"
+msgstr "设置指定图层的数据。数据的形式是二维的 [Image] 资源。"
 
 #: doc/classes/TextureLayered.xml
 msgid "Returns a dictionary with all the data used by this texture."
@@ -78398,7 +78555,7 @@ msgstr ""
 
 #: doc/classes/TileMap.xml
 msgid "The assigned [TileSet]."
-msgstr "指定的[TileSet]图块集。"
+msgstr "指定的 [TileSet] 图块集。"
 
 #: doc/classes/TileMap.xml
 msgid "Emitted when a tilemap setting has changed."
@@ -78735,7 +78892,7 @@ msgstr "返回图块的 [enum TileMode]。"
 
 #: doc/classes/TileSet.xml
 msgid "Returns the tile's Z index (drawing layer)."
-msgstr "返回图块的Z索引，即绘制层。"
+msgstr "返回图块的 Z 索引（绘制层）。"
 
 #: doc/classes/TileSet.xml
 msgid "Sets a light occluder for the tile."
@@ -78807,7 +78964,7 @@ msgstr "启用图块形状上的单向碰撞。"
 
 #: doc/classes/TileSet.xml
 msgid "Sets a [Transform2D] on a tile's shape."
-msgstr "在图块的形状上设置[Transform2D]。"
+msgstr "在图块的形状上设置 [Transform2D]。"
 
 #: doc/classes/TileSet.xml
 msgid "Sets an array of shapes for the tile, enabling collision."
@@ -78823,7 +78980,7 @@ msgstr "设置图块的纹理偏移。"
 
 #: doc/classes/TileSet.xml
 msgid "Sets the tile's [enum TileMode]."
-msgstr "设置图块的[enum TileMode]。"
+msgstr "设置图块的 [enum TileMode]。"
 
 #: doc/classes/TileSet.xml
 msgid "Sets the tile's drawing index."
@@ -79060,7 +79217,7 @@ msgid ""
 "[code]name[/code]. The [code]bias[/code] value is the offset from UTC in "
 "minutes, since not all time zones are multiples of an hour from UTC."
 msgstr ""
-"以字典的形式返回当前时区，包含的键为：[code]bias[/code]（偏倚）和 "
+"以字典的形式返回当前时区，包含的键为：[code]bias[/code]（偏置）和 "
 "[code]name[/code]（名称）。[code]bias[/code] 的值是从 UTC 的偏移量，单位为"
 "分，因为并不是所有时区与 UTC 的时间差都是整数倍小时。"
 
@@ -79431,7 +79588,7 @@ msgid ""
 msgstr ""
 "如果为 [code]true[/code]，只要按下的手指进出按钮，就会发出 [signal pressed] "
 "和[signal released] ]信号，即使压力开始于按钮的有效区域之外。\n"
-"[b]注意：[/b]这是一种 \"pass-by\" 的按压模式 ，而不是 \"bypass\"。"
+"[b]注意：[/b]这是一种“pass-by”的按压模式 ，而不是“bypass”。"
 
 #: doc/classes/TouchScreenButton.xml
 msgid "The button's texture for the pressed state."
@@ -79888,7 +80045,6 @@ msgid "Control to show a tree of items."
 msgstr "以树状形式显示项目的控件。"
 
 #: doc/classes/Tree.xml
-#, fuzzy
 msgid ""
 "This shows a tree of items that can be selected, expanded and collapsed. The "
 "tree can have multiple columns with custom controls like text editing, "
@@ -79925,8 +80081,8 @@ msgid ""
 msgstr ""
 "这展示了一个可以选择、展开和折叠的项目树。该树可以有多列的自定义控件，如文本"
 "编辑、按钮和弹出窗口。它对于结构化显示和互动很有用。\n"
-"树通过代码建立，使用[TreeItem]对象来构建结构。它们有一个单独根节点，但如果添"
-"加一个虚拟的隐藏根节点，就可以模拟多个根。\n"
+"树通过代码建立，使用 [TreeItem] 对象来构建结构。它们有一个单独根节点，但如果"
+"添加一个虚拟的隐藏根节点，就可以模拟多个根。\n"
 "[codeblock]\n"
 "func _ready():\n"
 "    var tree = Tree.new()\n"
@@ -79937,9 +80093,17 @@ msgstr ""
 "    var subchild1 = tree.create_item(child1)\n"
 "    subchild1.set_text(0, \"Subchild1\")\n"
 "[/codeblock]\n"
-"要遍历一个[Tree]对象中的所有[TreeItem]对象，在通过[method get_root]获得根之"
-"后，使用[method TreeItem.get_next]和[method TreeItem.get_children]方法。你可"
-"以对一个[TreeItem]使用[method Object.free]来把它从[Tree]中移除。"
+"要遍历一个 [Tree] 对象中的所有 [TreeItem] 对象，在通过 [method get_root] 获得"
+"根之后，使用 [method TreeItem.get_next] 和 [method TreeItem.get_children] 方"
+"法。你可以对一个 [TreeItem] 使用 [method Object.free] 来把它从 [Tree] 中移"
+"除。\n"
+"[b]增量搜索：[/b]与 [ItemList] 和 [PopupMenu] 类似，[Tree] 也支持在聚焦控件时"
+"在列表中进行搜索。按下与某个条目名称首字母一致的按键，就会选中以该字母开头的"
+"第一个条目。在此之后，进行增量搜索的办法有两种：1）在超时前再次按下同一个按"
+"键，选中以该字母开头的下一个条目。2）在超时前按下剩余字母对应的按键，直接匹配"
+"并选中所需的条目。这两个动作都会在最后一次按键超时后重置回列表顶端。你可以通"
+"过 [member ProjectSettings.gui/timers/incremental_search_max_interval_msec] "
+"修改超时时长。"
 
 #: doc/classes/Tree.xml
 msgid "Clears the tree. This removes all items."
@@ -80009,7 +80173,7 @@ msgid ""
 "Returns the rectangle for custom popups. Helper to create custom cell "
 "controls that display a popup. See [method TreeItem.set_cell_mode]."
 msgstr ""
-"返回自定义弹出窗口的矩形。帮助创建显示弹出式的自定义单元格控件。参阅[method "
+"返回自定义弹出窗口的矩形。帮助创建显示弹出式的自定义单元格控件。见 [method "
 "TreeItem.set_cell_mode]。"
 
 #: doc/classes/Tree.xml
@@ -80022,10 +80186,10 @@ msgid ""
 "To get the item which the returned drop section is relative to, use [method "
 "get_item_at_position]."
 msgstr ""
-"返回位于[code]position[/code]的放置部分，如果没有项目，则返回-100。\n"
-"在 \"项目上方\"、\"项目之上\"和 \"项目下方\"的放置部分将分别返回-1、0或1的"
-"值。请参阅[enum DropModeFlags]以了解每个放置部分的描述。\n"
-"要获得返回的放置部分相对项，请使用[method get_item_at_position]。"
+"返回位于 [code]position[/code] 的放置部分，如果没有项目，则返回 -100。\n"
+"在“项目上方”“项目之上”和“项目下方”的放置部分将分别返回 -1、0 或 1 的值。请参"
+"阅 [enum DropModeFlags] 以了解每个放置部分的描述。\n"
+"要获得返回的放置部分相对项，请使用 [method get_item_at_position]。"
 
 #: doc/classes/Tree.xml
 msgid ""
@@ -82385,7 +82549,7 @@ msgstr "[VBoxContainer] 的元素之间的垂直空间。"
 
 #: doc/classes/Vector2.xml
 msgid "Vector used for 2D math."
-msgstr "用于二维数学的向量。"
+msgstr "用于 2D 数学的向量。"
 
 #: doc/classes/Vector2.xml
 msgid ""
@@ -82995,11 +83159,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -83106,8 +83270,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
@@ -83855,7 +84019,6 @@ msgid "The subdivision amount of the fourth quadrant on the shadow atlas."
 msgstr "阴影图集上第四象限的细分量。"
 
 #: doc/classes/Viewport.xml
-#, fuzzy
 msgid ""
 "The shadow atlas' resolution (used for omni and spot lights). The value will "
 "be rounded up to the nearest power of 2.\n"
@@ -83865,8 +84028,9 @@ msgid ""
 "manually (typically at least [code]256[/code])."
 msgstr ""
 "阴影图集的分辨率（用于全向光和聚光）。该值将四舍五入到最接近的 2 的幂。\n"
-"[b]注意：[/b]如果设置为 0，阴影将不可见。由于用户创建的视区默认值为 0，因此必"
-"须手动将此值设置为大于 0。"
+"[b]注意：[/b]如果设置为 [code]0[/code]，点阴影和方向阴影[i]都[/i]将不可见。由"
+"于用户创建的视区默认值为 [code]0[/code]，因此必须手动将此值设置为大于 "
+"[code]0[/code]（一般至少是 [code]256[/code]）。"
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -83896,7 +84060,7 @@ msgstr "如果为 [code]true[/code]，尺寸重写也会影响拉伸。"
 msgid ""
 "If [code]true[/code], the viewport should render its background as "
 "transparent."
-msgstr "如果为 [code]true[/code]，该视窗应使其背景渲染为透明。"
+msgstr "如果为 [code]true[/code]，该视区应使其背景渲染为透明。"
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -83905,6 +84069,9 @@ msgid ""
 "USAGE_2D_NO_SAMPLING], [member hdr] will have no effect when enabled since "
 "HDR is not supported for 2D."
 msgstr ""
+"视区的渲染模式。\n"
+"[b]注意：[/b]如果设为 [constant USAGE_2D] 或 [constant "
+"USAGE_2D_NO_SAMPLING]，则启用 [member hdr] 不会生效，因为 2D 不支持 HDR。"
 
 #: doc/classes/Viewport.xml
 msgid ""
@@ -89237,7 +89404,7 @@ msgstr "由六个面组成的纹理，可以在着色器中使用 [code]vec3[/co
 
 #: doc/classes/VisualServer.xml
 msgid "An array of 2-dimensional textures."
-msgstr "一组二维纹理。"
+msgstr "二维纹理的数组。"
 
 #: doc/classes/VisualServer.xml
 msgid "A 3-dimensional texture with width, height, and depth."
@@ -89473,17 +89640,17 @@ msgstr "第三次拆分所占用的阴影图集的比例。第四个拆分占据
 msgid ""
 "Normal bias used to offset shadow lookup by object normal. Can be used to "
 "fix self-shadowing artifacts."
-msgstr "法线偏移，用于抵消物体法线的阴影查找。可以用来修复自阴影的伪影。"
+msgstr "法线偏置，用于抵消物体法线的阴影查找。可以用来修复自阴影的伪影。"
 
 #: doc/classes/VisualServer.xml
 msgid "Bias the shadow lookup to fix self-shadowing artifacts."
-msgstr "对阴影查找进行偏移，以修复自我阴影的假象。"
+msgstr "对阴影查找进行偏置，以修复自我阴影的假象。"
 
 #: doc/classes/VisualServer.xml
 msgid ""
 "Increases bias on further splits to fix self-shadowing that only occurs far "
 "away from the camera."
-msgstr "增加对进一步分割的偏差，以修复仅在远离相机的地方发生的自身阴影。"
+msgstr "增加对进一步分割的偏置，以修复仅在远离相机的地方发生的自身阴影。"
 
 #: doc/classes/VisualServer.xml
 msgid "Represents the size of the [enum LightParam] enum."
@@ -89971,7 +90138,7 @@ msgid ""
 "Use a specified canvas layer as the background. This can be useful for "
 "instantiating a 2D scene in a 3D world."
 msgstr ""
-"使用一个指定的画布层作为背景。这对在三维世界中实例化一个二维场景很有用。"
+"使用一个指定的画布层作为背景。这对在 3D 世界中实例化一个 2D 场景很有用。"
 
 #: doc/classes/VisualServer.xml
 msgid ""
@@ -93917,7 +94084,7 @@ msgid ""
 "current and potential collisions. When using multi-threaded physics, access "
 "is limited to [code]_physics_process(delta)[/code] in the main thread."
 msgstr ""
-"直接访问世界物理二维空间状态。用于查询当前和潜在的碰撞。使用多线程物理时，访"
+"直接访问世界物理 2D 空间状态。用于查询当前和潜在的碰撞。使用多线程物理时，访"
 "问仅限于主线程中的 [code]_physics_process(delta)[/code]。"
 
 #: doc/classes/World2D.xml
diff --git a/doc/translations/zh_TW.po b/doc/translations/zh_TW.po
index 63312338fc..cd8d5c0eb5 100644
--- a/doc/translations/zh_TW.po
+++ b/doc/translations/zh_TW.po
@@ -10080,7 +10080,13 @@ msgid "If [code]true[/code], audio plays when added to scene tree."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "Bus on which this audio is playing."
+msgid ""
+"Bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer.xml
@@ -10245,7 +10251,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
-msgid "The bus on which this audio is playing."
+msgid ""
+"The bus on which this audio is playing.\n"
+"[b]Note:[/b] When setting this property, keep in mind that no validation is "
+"performed to see if the given name matches an existing bus. This is because "
+"audio bus layouts might be loaded after this property is set. If this given "
+"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
+"code]."
 msgstr ""
 
 #: doc/classes/AudioStreamPlayer3D.xml
@@ -28566,13 +28578,14 @@ msgstr ""
 
 #: doc/classes/HTTPRequest.xml
 msgid ""
-"If set to a value greater than [code]0.0[/code], the HTTP request will time "
-"out after [code]timeout[/code] seconds have passed and the request is not "
-"[i]completed[/i] yet. For small HTTP requests such as REST API usage, set "
-"[member timeout] to a value greater than [code]0.0[/code] to prevent the "
-"application from getting stuck if the request fails to get a response in a "
-"timely manner. For file downloads, leave this to [code]0.0[/code] to prevent "
-"the download from failing if it takes too much time."
+"If set to a value greater than [code]0.0[/code] before the request starts, "
+"the HTTP request will time out after [code]timeout[/code] seconds have "
+"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
+"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
+"code] and [code]30.0[/code] to prevent the application from getting stuck if "
+"the request fails to get a response in a timely manner. For file downloads, "
+"leave this to [code]0.0[/code] to prevent the download from failing if it "
+"takes too much time."
 msgstr ""
 
 #: doc/classes/HTTPRequest.xml
@@ -29988,9 +30001,9 @@ msgid ""
 "freehand lines is required, input accumulation should generally be disabled "
 "while the user is drawing the line to get results that closely follow the "
 "actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]disabled[/i] by default for backward "
-"compatibility reasons. It is however recommended to enable it for games "
-"which don't require very reactive input, as this will decrease CPU usage."
+"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
+"recommended to keep it enabled for games which don't require very reactive "
+"input, as this will decrease CPU usage."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -30564,10 +30577,13 @@ msgstr ""
 msgid ""
 "Contains mouse and pen motion information. Supports relative, absolute "
 "positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] By default, this event can be emitted multiple times per frame "
-"rendered, allowing for precise input reporting, at the expense of CPU usage. "
-"You can set [member Input.use_accumulated_input] to [code]true[/code] to let "
-"multiple events merge into a single emitted event per frame.\n"
+"[b]Note:[/b] The behavior of this event is affected by the value of [member "
+"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
+"pen motion events received from the OS will be merged to emit an accumulated "
+"event only once per frame rendered at most. When set to [code]false[/code], "
+"the events will be emitted as received, which means that they can be emitted "
+"multiple times per frame rendered, allowing for precise input reporting at "
+"the expense of CPU usage.\n"
 "[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
 "implementing [url=https://en.wikipedia.org/wiki/"
 "Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
@@ -30580,6 +30596,12 @@ msgstr ""
 
 #: doc/classes/InputEventMouseMotion.xml
 msgid ""
+"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
+"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
+msgstr ""
+
+#: doc/classes/InputEventMouseMotion.xml
+msgid ""
 "Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
 "code] to [code]1.0[/code]."
 msgstr ""
@@ -45518,6 +45540,13 @@ msgstr ""
 msgid "Changes the byte at the given index."
 msgstr ""
 
+#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
+#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
+#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
+#: doc/classes/PoolVector3Array.xml
+msgid "Sorts the elements of the array in ascending order."
+msgstr ""
+
 #: doc/classes/PoolByteArray.xml
 msgid ""
 "Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
@@ -54447,7 +54476,8 @@ msgid ""
 "SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
 "[SceneTreeTween] might become invalid when it has finished tweening, is "
 "killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended."
+"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
+"[method interpolate_value]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54487,15 +54517,16 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [Tween] run infinitely, "
-"until either it is killed with [method kill], the [Tween]'s bound node is "
-"freed, or all the animated objects have been freed (which makes further "
-"animation impossible).\n"
+"Calling this method without arguments will make the [SceneTreeTween] run "
+"infinitely, until either it is killed with [method kill], the "
+"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
+"been freed (which makes further animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
 "infinite loops. To prevent the game freezing, 0-duration looped animations "
 "(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a [Tween]'s "
-"lifetime depends on some node, always use [method bind_node]."
+"number of loops, which may produce unexpected results. If a "
+"[SceneTreeTween]'s lifetime depends on some node, always use [method "
+"bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -55972,11 +56003,30 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Spatial.xml
+msgid ""
+"Rotation part of the global transformation in radians, specified in terms of "
+"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
+"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
+"vector. The three Euler angles, which are the three independent parameters "
+"of the Euler-angle parametrization of the rotation matrix, are stored in a "
+"[Vector3] data structure not because the rotation is a vector, but only "
+"because [Vector3] exists as a convenient data-structure to store 3 floating-"
+"point numbers. Therefore, applying affine operations on the rotation "
+"\"vector\" is not meaningful."
+msgstr ""
+
+#: doc/classes/Spatial.xml
 msgid "World space (global) [Transform] of this node."
 msgstr ""
 
 #: doc/classes/Spatial.xml
 msgid ""
+"Global position of this node. This is equivalent to [code]global_transform."
+"origin[/code]."
+msgstr ""
+
+#: doc/classes/Spatial.xml
+msgid ""
 "Rotation part of the local transformation in radians, specified in terms of "
 "YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
 "[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
@@ -66021,11 +66071,11 @@ msgstr ""
 #: doc/classes/VehicleBody.xml
 msgid ""
 "Accelerates the vehicle by applying an engine force. The vehicle is only "
-"speed up if the wheels that have [member VehicleWheel.use_as_traction] set "
-"to [code]true[/code] and are in contact with a surface. The [member "
-"RigidBody.mass] of the vehicle has an effect on the acceleration of the "
-"vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 "
-"range for acceleration.\n"
+"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
+"[code]true[/code] and are in contact with a surface. The [member RigidBody."
+"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
+"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
+"acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "
 "you will need to add logic for this if you wish to simulate gears.\n"
 "A negative value will result in the vehicle reversing."
@@ -66105,8 +66155,8 @@ msgstr ""
 
 #: doc/classes/VehicleWheel.xml
 msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only speed "
-"up if it is in contact with a surface. The [member RigidBody.mass] of the "
+"Accelerates the wheel by applying an engine force. The wheel is only sped up "
+"if it is in contact with a surface. The [member RigidBody.mass] of the "
 "vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
 "a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
 "[b]Note:[/b] The simulation does not take the effect of gears into account, "