doc: Sync classref with current source

9 files changed, 71 insertions, 45 deletions

diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml
index 3ca7e0716b..380abed083 100644
--- a/doc/classes/@GlobalScope.xml
+++ b/doc/classes/@GlobalScope.xml
@@ -1280,6 +1280,10 @@
 		<constant name="HORIZONTAL" value="0" enum="Orientation">
 			General horizontal alignment, usually used for [Separator], [ScrollBar], [Slider], etc.
 		</constant>
+		<constant name="CLOCKWISE" value="0" enum="ClockDirection">
+		</constant>
+		<constant name="COUNTERCLOCKWISE" value="1" enum="ClockDirection">
+		</constant>
 		<constant name="HALIGN_LEFT" value="0" enum="HAlign">
 			Horizontal left alignment, usually for text-derived classes.
 		</constant>
diff --git a/doc/classes/BaseMaterial3D.xml b/doc/classes/BaseMaterial3D.xml
index fa6cf372ce..fa0c3b167a 100644
--- a/doc/classes/BaseMaterial3D.xml
+++ b/doc/classes/BaseMaterial3D.xml
@@ -93,7 +93,7 @@
 		<member name="alpha_scissor_threshold" type="float" setter="set_alpha_scissor_threshold" getter="get_alpha_scissor_threshold">
 			Threshold at which the alpha scissor will discard values.
 		</member>
-		<member name="anisotropy" type="float" setter="set_anisotropy" getter="get_anisotropy">
+		<member name="anisotropy" type="float" setter="set_anisotropy" getter="get_anisotropy" default="0.0">
 			The strength of the anisotropy effect.
 		</member>
 		<member name="anisotropy_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
@@ -105,19 +105,19 @@
 		<member name="ao_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
 			If [code]true[/code], ambient occlusion is enabled. Ambient occlusion darkens areas based on the [member ao_texture].
 		</member>
-		<member name="ao_light_affect" type="float" setter="set_ao_light_affect" getter="get_ao_light_affect">
+		<member name="ao_light_affect" type="float" setter="set_ao_light_affect" getter="get_ao_light_affect" default="0.0">
 			Amount that ambient occlusion affects lighting from lights. If [code]0[/code], ambient occlusion only affects ambient light. If [code]1[/code], ambient occlusion affects lights just as much as it affects ambient light. This can be used to impact the strength of the ambient occlusion effect, but typically looks unrealistic.
 		</member>
-		<member name="ao_on_uv2" type="bool" setter="set_flag" getter="get_flag">
+		<member name="ao_on_uv2" type="bool" setter="set_flag" getter="get_flag" default="false">
 			If [code]true[/code], use [code]UV2[/code] coordinates to look up from the [member ao_texture].
 		</member>
 		<member name="ao_texture" type="Texture2D" setter="set_texture" getter="get_texture">
 			Texture that defines the amount of ambient occlusion for a given point on the object.
 		</member>
-		<member name="ao_texture_channel" type="int" setter="set_ao_texture_channel" getter="get_ao_texture_channel" enum="BaseMaterial3D.TextureChannel">
+		<member name="ao_texture_channel" type="int" setter="set_ao_texture_channel" getter="get_ao_texture_channel" enum="BaseMaterial3D.TextureChannel" default="0">
 			Specifies the channel of the [member ao_texture] in which the ambient occlusion information is stored. This is useful when you store the information for multiple effects in a single texture. For example if you stored metallic in the red channel, roughness in the blue, and ambient occlusion in the green you could reduce the number of textures you use.
 		</member>
-		<member name="backlight" type="Color" setter="set_backlight" getter="get_backlight">
+		<member name="backlight" type="Color" setter="set_backlight" getter="get_backlight" default="Color( 0, 0, 0, 1 )">
 			The color used by the backlight effect. Represents the light passing through an object.
 		</member>
 		<member name="backlight_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
@@ -137,13 +137,13 @@
 			The material's blend mode.
 			[b]Note:[/b] Values other than [code]Mix[/code] force the object into the transparent pipeline. See [enum BlendMode].
 		</member>
-		<member name="clearcoat" type="float" setter="set_clearcoat" getter="get_clearcoat">
+		<member name="clearcoat" type="float" setter="set_clearcoat" getter="get_clearcoat" default="1.0">
 			Sets the strength of the clearcoat effect. Setting to [code]0[/code] looks the same as disabling the clearcoat effect.
 		</member>
 		<member name="clearcoat_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
 			If [code]true[/code], clearcoat rendering is enabled. Adds a secondary transparent pass to the lighting calculation resulting in an added specular blob. This makes materials appear as if they have a clear layer on them that can be either glossy or rough.
 		</member>
-		<member name="clearcoat_gloss" type="float" setter="set_clearcoat_gloss" getter="get_clearcoat_gloss">
+		<member name="clearcoat_gloss" type="float" setter="set_clearcoat_gloss" getter="get_clearcoat_gloss" default="0.5">
 			Sets the roughness of the clearcoat pass. A higher value results in a smoother clearcoat while a lower value results in a rougher clearcoat.
 		</member>
 		<member name="clearcoat_texture" type="Texture2D" setter="set_texture" getter="get_texture">
@@ -158,7 +158,7 @@
 		<member name="detail_albedo" type="Texture2D" setter="set_texture" getter="get_texture">
 			Texture that specifies the color of the detail overlay.
 		</member>
-		<member name="detail_blend_mode" type="int" setter="set_detail_blend_mode" getter="get_detail_blend_mode" enum="BaseMaterial3D.BlendMode">
+		<member name="detail_blend_mode" type="int" setter="set_detail_blend_mode" getter="get_detail_blend_mode" enum="BaseMaterial3D.BlendMode" default="0">
 			Specifies how the [member detail_albedo] should blend with the current [code]ALBEDO[/code]. See [enum BlendMode] for options.
 		</member>
 		<member name="detail_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
@@ -171,7 +171,7 @@
 			Texture that specifies the per-pixel normal of the detail overlay.
 			[b]Note:[/b] Godot expects the normal map to use X+, Y-, and Z+ coordinates. See [url=http://wiki.polycount.com/wiki/Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for a comparison of normal map coordinates expected by popular engines.
 		</member>
-		<member name="detail_uv_layer" type="int" setter="set_detail_uv" getter="get_detail_uv" enum="BaseMaterial3D.DetailUV">
+		<member name="detail_uv_layer" type="int" setter="set_detail_uv" getter="get_detail_uv" enum="BaseMaterial3D.DetailUV" default="0">
 			Specifies whether to use [code]UV[/code] or [code]UV2[/code] for the detail layer. See [enum DetailUV] for options.
 		</member>
 		<member name="diffuse_mode" type="int" setter="set_diffuse_mode" getter="get_diffuse_mode" enum="BaseMaterial3D.DiffuseMode" default="0">
@@ -183,30 +183,30 @@
 		<member name="disable_receive_shadows" type="bool" setter="set_flag" getter="get_flag" default="false">
 			If [code]true[/code], the object receives no shadow that would otherwise be cast onto it.
 		</member>
-		<member name="distance_fade_max_distance" type="float" setter="set_distance_fade_max_distance" getter="get_distance_fade_max_distance">
+		<member name="distance_fade_max_distance" type="float" setter="set_distance_fade_max_distance" getter="get_distance_fade_max_distance" default="10.0">
 			Distance at which the object appears fully opaque.
 			[b]Note:[/b] If [code]distance_fade_max_distance[/code] is less than [code]distance_fade_min_distance[/code], the behavior will be reversed. The object will start to fade away at [code]distance_fade_max_distance[/code] and will fully disappear once it reaches [code]distance_fade_min_distance[/code].
 		</member>
-		<member name="distance_fade_min_distance" type="float" setter="set_distance_fade_min_distance" getter="get_distance_fade_min_distance">
+		<member name="distance_fade_min_distance" type="float" setter="set_distance_fade_min_distance" getter="get_distance_fade_min_distance" default="0.0">
 			Distance at which the object starts to become visible. If the object is less than this distance away, it will be invisible.
 			[b]Note:[/b] If [code]distance_fade_min_distance[/code] is greater than [code]distance_fade_max_distance[/code], the behavior will be reversed. The object will start to fade away at [code]distance_fade_max_distance[/code] and will fully disappear once it reaches [code]distance_fade_min_distance[/code].
 		</member>
 		<member name="distance_fade_mode" type="int" setter="set_distance_fade" getter="get_distance_fade" enum="BaseMaterial3D.DistanceFadeMode" default="0">
 			Specifies which type of fade to use. Can be any of the [enum DistanceFadeMode]s.
 		</member>
-		<member name="emission" type="Color" setter="set_emission" getter="get_emission">
+		<member name="emission" type="Color" setter="set_emission" getter="get_emission" default="Color( 0, 0, 0, 1 )">
 			The emitted light's color. See [member emission_enabled].
 		</member>
 		<member name="emission_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
 			If [code]true[/code], the body emits light. Emitting light makes the object appear brighter. The object can also cast light on other objects if a [GIProbe] is used and this object is used in baked lighting.
 		</member>
-		<member name="emission_energy" type="float" setter="set_emission_energy" getter="get_emission_energy">
+		<member name="emission_energy" type="float" setter="set_emission_energy" getter="get_emission_energy" default="1.0">
 			The emitted light's strength. See [member emission_enabled].
 		</member>
-		<member name="emission_on_uv2" type="bool" setter="set_flag" getter="get_flag">
+		<member name="emission_on_uv2" type="bool" setter="set_flag" getter="get_flag" default="false">
 			Use [code]UV2[/code] to read from the [member emission_texture].
 		</member>
-		<member name="emission_operator" type="int" setter="set_emission_operator" getter="get_emission_operator" enum="BaseMaterial3D.EmissionOperator">
+		<member name="emission_operator" type="int" setter="set_emission_operator" getter="get_emission_operator" enum="BaseMaterial3D.EmissionOperator" default="0">
 			Sets how [member emission] interacts with [member emission_texture]. Can either add or multiply. See [enum EmissionOperator] for options.
 		</member>
 		<member name="emission_texture" type="Texture2D" setter="set_texture" getter="get_texture">
@@ -221,23 +221,23 @@
 		<member name="grow_amount" type="float" setter="set_grow" getter="get_grow" default="0.0">
 			Grows object vertices in the direction of their normals.
 		</member>
-		<member name="heightmap_deep_parallax" type="bool" setter="set_heightmap_deep_parallax" getter="is_heightmap_deep_parallax_enabled">
+		<member name="heightmap_deep_parallax" type="bool" setter="set_heightmap_deep_parallax" getter="is_heightmap_deep_parallax_enabled" default="false">
 		</member>
 		<member name="heightmap_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
 			If [code]true[/code], height mapping is enabled (also called "parallax mapping" or "depth mapping"). See also [member normal_enabled].
 			[b]Note:[/b] Height mapping is not supported if triplanar mapping is used on the same material. The value of [member heightmap_enabled] will be ignored if [member uv1_triplanar] is enabled.
 		</member>
-		<member name="heightmap_flip_binormal" type="bool" setter="set_heightmap_deep_parallax_flip_binormal" getter="get_heightmap_deep_parallax_flip_binormal">
+		<member name="heightmap_flip_binormal" type="bool" setter="set_heightmap_deep_parallax_flip_binormal" getter="get_heightmap_deep_parallax_flip_binormal" default="false">
 		</member>
-		<member name="heightmap_flip_tangent" type="bool" setter="set_heightmap_deep_parallax_flip_tangent" getter="get_heightmap_deep_parallax_flip_tangent">
+		<member name="heightmap_flip_tangent" type="bool" setter="set_heightmap_deep_parallax_flip_tangent" getter="get_heightmap_deep_parallax_flip_tangent" default="false">
 		</member>
-		<member name="heightmap_flip_texture" type="bool" setter="set_flag" getter="get_flag">
+		<member name="heightmap_flip_texture" type="bool" setter="set_flag" getter="get_flag" default="false">
 		</member>
 		<member name="heightmap_max_layers" type="int" setter="set_heightmap_deep_parallax_max_layers" getter="get_heightmap_deep_parallax_max_layers">
 		</member>
 		<member name="heightmap_min_layers" type="int" setter="set_heightmap_deep_parallax_min_layers" getter="get_heightmap_deep_parallax_min_layers">
 		</member>
-		<member name="heightmap_scale" type="float" setter="set_heightmap_scale" getter="get_heightmap_scale">
+		<member name="heightmap_scale" type="float" setter="set_heightmap_scale" getter="get_heightmap_scale" default="0.05">
 		</member>
 		<member name="heightmap_texture" type="Texture2D" setter="set_texture" getter="get_texture">
 		</member>
@@ -260,7 +260,7 @@
 		<member name="normal_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
 			If [code]true[/code], normal mapping is enabled.
 		</member>
-		<member name="normal_scale" type="float" setter="set_normal_scale" getter="get_normal_scale">
+		<member name="normal_scale" type="float" setter="set_normal_scale" getter="get_normal_scale" default="1.0">
 			The strength of the normal map's effect.
 		</member>
 		<member name="normal_texture" type="Texture2D" setter="set_texture" getter="get_texture">
@@ -281,7 +281,7 @@
 		<member name="point_size" type="float" setter="set_point_size" getter="get_point_size" default="1.0">
 			The point size in pixels. See [member use_point_size].
 		</member>
-		<member name="proximity_fade_distance" type="float" setter="set_proximity_fade_distance" getter="get_proximity_fade_distance">
+		<member name="proximity_fade_distance" type="float" setter="set_proximity_fade_distance" getter="get_proximity_fade_distance" default="1.0">
 			Distance over which the fade effect takes place. The larger the distance the longer it takes for an object to fade.
 		</member>
 		<member name="proximity_fade_enable" type="bool" setter="set_proximity_fade" getter="is_proximity_fade_enabled" default="false">
@@ -290,16 +290,16 @@
 		<member name="refraction_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
 			If [code]true[/code], the refraction effect is enabled. Distorts transparency based on light from behind the object.
 		</member>
-		<member name="refraction_scale" type="float" setter="set_refraction" getter="get_refraction">
+		<member name="refraction_scale" type="float" setter="set_refraction" getter="get_refraction" default="0.05">
 			The strength of the refraction effect.
 		</member>
 		<member name="refraction_texture" type="Texture2D" setter="set_texture" getter="get_texture">
 			Texture that controls the strength of the refraction per-pixel. Multiplied by [member refraction_scale].
 		</member>
-		<member name="refraction_texture_channel" type="int" setter="set_refraction_texture_channel" getter="get_refraction_texture_channel" enum="BaseMaterial3D.TextureChannel">
+		<member name="refraction_texture_channel" type="int" setter="set_refraction_texture_channel" getter="get_refraction_texture_channel" enum="BaseMaterial3D.TextureChannel" default="0">
 			Specifies the channel of the [member ao_texture] in which the ambient occlusion information is stored. This is useful when you store the information for multiple effects in a single texture. For example if you stored metallic in the red channel, roughness in the blue, and ambient occlusion in the green you could reduce the number of textures you use.
 		</member>
-		<member name="rim" type="float" setter="set_rim" getter="get_rim">
+		<member name="rim" type="float" setter="set_rim" getter="get_rim" default="1.0">
 			Sets the strength of the rim lighting effect.
 		</member>
 		<member name="rim_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
@@ -308,7 +308,7 @@
 		<member name="rim_texture" type="Texture2D" setter="set_texture" getter="get_texture">
 			Texture used to set the strength of the rim lighting effect per-pixel. Multiplied by [member rim].
 		</member>
-		<member name="rim_tint" type="float" setter="set_rim_tint" getter="get_rim_tint">
+		<member name="rim_tint" type="float" setter="set_rim_tint" getter="get_rim_tint" default="0.5">
 			The amount of to blend light and albedo color when rendering rim effect. If [code]0[/code] the light color is used, while [code]1[/code] means albedo color is used. An intermediate value generally works best.
 		</member>
 		<member name="roughness" type="float" setter="set_roughness" getter="get_roughness" default="1.0">
@@ -332,24 +332,24 @@
 		<member name="subsurf_scatter_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
 			If [code]true[/code], subsurface scattering is enabled. Emulates light that penetrates an object's surface, is scattered, and then emerges.
 		</member>
-		<member name="subsurf_scatter_skin_mode" type="bool" setter="set_flag" getter="get_flag">
+		<member name="subsurf_scatter_skin_mode" type="bool" setter="set_flag" getter="get_flag" default="false">
 			If [code]true[/code], subsurface scattering will use a special mode optimized for the color and density of human skin.
 		</member>
-		<member name="subsurf_scatter_strength" type="float" setter="set_subsurface_scattering_strength" getter="get_subsurface_scattering_strength">
+		<member name="subsurf_scatter_strength" type="float" setter="set_subsurface_scattering_strength" getter="get_subsurface_scattering_strength" default="0.0">
 			The strength of the subsurface scattering effect.
 		</member>
 		<member name="subsurf_scatter_texture" type="Texture2D" setter="set_texture" getter="get_texture">
 			Texture used to control the subsurface scattering strength. Stored in the red texture channel. Multiplied by [member subsurf_scatter_strength].
 		</member>
-		<member name="subsurf_scatter_transmittance_boost" type="float" setter="set_transmittance_boost" getter="get_transmittance_boost">
+		<member name="subsurf_scatter_transmittance_boost" type="float" setter="set_transmittance_boost" getter="get_transmittance_boost" default="0.0">
 		</member>
-		<member name="subsurf_scatter_transmittance_color" type="Color" setter="set_transmittance_color" getter="get_transmittance_color">
+		<member name="subsurf_scatter_transmittance_color" type="Color" setter="set_transmittance_color" getter="get_transmittance_color" default="Color( 1, 1, 1, 1 )">
 		</member>
-		<member name="subsurf_scatter_transmittance_curve" type="float" setter="set_transmittance_curve" getter="get_transmittance_curve">
+		<member name="subsurf_scatter_transmittance_curve" type="float" setter="set_transmittance_curve" getter="get_transmittance_curve" default="1.0">
 		</member>
-		<member name="subsurf_scatter_transmittance_depth" type="float" setter="set_transmittance_depth" getter="get_transmittance_depth">
+		<member name="subsurf_scatter_transmittance_depth" type="float" setter="set_transmittance_depth" getter="get_transmittance_depth" default="0.1">
 		</member>
-		<member name="subsurf_scatter_transmittance_enabled" type="bool" setter="set_feature" getter="get_feature">
+		<member name="subsurf_scatter_transmittance_enabled" type="bool" setter="set_feature" getter="get_feature" default="false">
 		</member>
 		<member name="subsurf_scatter_transmittance_texture" type="Texture2D" setter="set_texture" getter="get_texture">
 		</member>
diff --git a/doc/classes/EditorNode3DGizmoPlugin.xml b/doc/classes/EditorNode3DGizmoPlugin.xml
index 322cff4e43..1e9d089962 100644
--- a/doc/classes/EditorNode3DGizmoPlugin.xml
+++ b/doc/classes/EditorNode3DGizmoPlugin.xml
@@ -98,6 +98,13 @@
 				Creates an unshaded material with its variants (selected and/or editable) and adds them to the internal material list. They can then be accessed with [method get_material] and used in [method EditorNode3DGizmo.add_mesh] and [method EditorNode3DGizmo.add_lines]. Should not be overridden.
 			</description>
 		</method>
+		<method name="get_gizmo_name" qualifiers="virtual">
+			<return type="String">
+			</return>
+			<description>
+				Override this method to provide the name that will appear in the gizmo visibility menu.
+			</description>
+		</method>
 		<method name="get_handle_name" qualifiers="virtual">
 			<return type="String">
 			</return>
@@ -131,13 +138,6 @@
 				Gets material from the internal list of materials. If an [EditorNode3DGizmo] is provided, it will try to get the corresponding variant (selected and/or editable).
 			</description>
 		</method>
-		<method name="get_name" qualifiers="virtual">
-			<return type="String">
-			</return>
-			<description>
-				Override this method to provide the name that will appear in the gizmo visibility menu.
-			</description>
-		</method>
 		<method name="get_priority" qualifiers="virtual">
 			<return type="int">
 			</return>
diff --git a/doc/classes/GLTFState.xml b/doc/classes/GLTFState.xml
index a8e96ec8a9..8255cd73d0 100644
--- a/doc/classes/GLTFState.xml
+++ b/doc/classes/GLTFState.xml
@@ -109,6 +109,12 @@
 			<description>
 			</description>
 		</method>
+		<method name="get_unique_animation_names">
+			<return type="Array">
+			</return>
+			<description>
+			</description>
+		</method>
 		<method name="get_unique_names">
 			<return type="Array">
 			</return>
@@ -219,6 +225,14 @@
 			<description>
 			</description>
 		</method>
+		<method name="set_unique_animation_names">
+			<return type="void">
+			</return>
+			<argument index="0" name="unique_animation_names" type="Array">
+			</argument>
+			<description>
+			</description>
+		</method>
 		<method name="set_unique_names">
 			<return type="void">
 			</return>
diff --git a/doc/classes/GLTFTexture.xml b/doc/classes/GLTFTexture.xml
index c7f94ab0da..be2210331f 100644
--- a/doc/classes/GLTFTexture.xml
+++ b/doc/classes/GLTFTexture.xml
@@ -9,7 +9,7 @@
 	<methods>
 	</methods>
 	<members>
-		<member name="src_image" type="int" setter="set_src_image" getter="get_src_image" default="4">
+		<member name="src_image" type="int" setter="set_src_image" getter="get_src_image" default="195773152">
 		</member>
 	</members>
 	<constants>
diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml
index 3aa3e12e74..bdf01a3dcf 100644
--- a/doc/classes/ProjectSettings.xml
+++ b/doc/classes/ProjectSettings.xml
@@ -469,7 +469,7 @@
 		<member name="debug/shapes/collision/max_contacts_displayed" type="int" setter="" getter="" default="10000">
 			Maximum number of contact points between collision shapes to display when "Visible Collision Shapes" is enabled in the Debug menu.
 		</member>
-		<member name="debug/shapes/collision/shape_color" type="Color" setter="" getter="" default="Color( 0, 0.6, 0.7, 0.5 )">
+		<member name="debug/shapes/collision/shape_color" type="Color" setter="" getter="" default="Color( 0, 0.6, 0.7, 0.42 )">
 			Color of the collision shapes, visible when "Visible Collision Shapes" is enabled in the Debug menu.
 		</member>
 		<member name="debug/shapes/navigation/disabled_geometry_color" type="Color" setter="" getter="" default="Color( 1, 0.7, 0.1, 0.4 )">
diff --git a/doc/classes/RayCast3D.xml b/doc/classes/RayCast3D.xml
index 681cfcd4ce..443890438f 100644
--- a/doc/classes/RayCast3D.xml
+++ b/doc/classes/RayCast3D.xml
@@ -136,11 +136,11 @@
 		<member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1">
 			The ray's collision mask. Only objects in at least one collision layer enabled in the mask will be detected. See [url=https://docs.godotengine.org/en/latest/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information.
 		</member>
-		<member name="debug_shape_custom_color" type="Color" setter="set_debug_shape__custom_color" getter="get_debug_shape_custom_color" default="Color( 0.0, 0.0, 0.0 )">
+		<member name="debug_shape_custom_color" type="Color" setter="set_debug_shape_custom_color" getter="get_debug_shape_custom_color" default="Color( 0, 0, 0, 1 )">
 			The custom color to use to draw the shape in the editor and at run-time if [b]Visible Collision Shapes[/b] is enabled in the [b]Debug[/b] menu. This color will be highlighted at run-time if the [RayCast3D] is colliding with something.
 			If set to [code]Color(0.0, 0.0, 0.0)[/code] (by default), the color set in [member ProjectSettings.debug/shapes/collision/shape_color] is used.
 		</member>
-		<member name="debug_shape_thickness" type="int" setter="set_debug_shape_thickness" getter="get_debug_shape_thickness" default="1">
+		<member name="debug_shape_thickness" type="float" setter="set_debug_shape_thickness" getter="get_debug_shape_thickness" default="2.0">
 			If set to [code]1[/code], a line is used as the debug shape. Otherwise, a truncated pyramid is drawn to represent the [RayCast3D]. Requires [b]Visible Collision Shapes[/b] to be enabled in the [b]Debug[/b] menu for the debug shape to be visible at run-time.
 		</member>
 		<member name="enabled" type="bool" setter="set_enabled" getter="is_enabled" default="true">
diff --git a/doc/classes/SceneTree.xml b/doc/classes/SceneTree.xml
index 72a42202c7..e1f6830eb2 100644
--- a/doc/classes/SceneTree.xml
+++ b/doc/classes/SceneTree.xml
@@ -88,6 +88,14 @@
 				The timer will be automatically freed after its time elapses.
 			</description>
 		</method>
+		<method name="get_first_node_in_group">
+			<return type="Node">
+			</return>
+			<argument index="0" name="group" type="StringName">
+			</argument>
+			<description>
+			</description>
+		</method>
 		<method name="get_frame" qualifiers="const">
 			<return type="int">
 			</return>
diff --git a/doc/classes/TextEdit.xml b/doc/classes/TextEdit.xml
index 6232a4e146..088bcd1c3c 100644
--- a/doc/classes/TextEdit.xml
+++ b/doc/classes/TextEdit.xml
@@ -412,7 +412,7 @@
 				[/gdscript]
 				[csharp]
 				int[] result = Search("print", (uint)TextEdit.SearchFlags.WholeWords, 0, 0);
-				if (result.Length > 0)
+				if (result.Length &gt; 0)
 				{
 				    // Result found.
 				    int lineNumber = result[(int)TextEdit.SearchResult.Line];